| Age | Commit message (Collapse) | Author |
|---|
|
Erik Rijkers
|
|
Merge several copies of "copy an inet value and adjust the mask length"
code to create a single, conveniently C-callable function. This function
is exported for future use by inet SPGiST support, but it's good cleanup
anyway since we had three slightly-different-for-no-good-reason copies.
(Extracted from a larger patch, to separate new code from refactoring
of old code)
Emre Hasegeli
|
|
Due to an error in the abbreviated key abort logic, the most recently
processed SortTuple could be incorrectly marked NULL, resulting in an
incorrect final sort order.
In the worst case, this could result in a corrupt btree index, which
would need to be rebuild using REINDEX. However, abbrevation doesn't
abort very often, not all data types use it, and only one tuple would
end up in the wrong place, so the practical impact of this mistake may
be somewhat limited.
Report and patch by Peter Geoghegan.
|
|
Dimitry Ivanov spotted a typo, and I added a bit of wordsmithing.
|
|
Remove the plpgsql wrapping that hides the context. So now the test
will fail if the work doesn't actually happen in a parallel worker. Run
the test in its own test group to ensure it won't run out of resources
for that.
|
|
More fallout from commit a00c58314. Pointed out by Michael Paquier.
|
|
It is redundant with appendConnStrVal(), which became an extern function
in commit 41f18f021a0882eccbeca62e2ed4b66c6b96e9c9. This changes the
handling of out-of-memory and of certain inputs for which quoting is
optional, but pg_basebackup has no need for unusual treatment thereof.
|
|
Fallout from commit a00c58314. Per buildfarm.
|
|
The original coding here was not nearly careful enough about quoting
special characters, and it didn't get corner cases right for constructing
the pg_ctl path either. Use join_path_components() and appendShellString()
to do it honestly, so that the string will more likely work if blindly
copied-and-pasted.
While at it, teach appendShellString() not to quote strings that clearly
don't need it, so that the output from initdb doesn't become uglier than
it was before in typical cases where quoting is not needed.
Ryan Murphy, reviewed by Michael Paquier and myself
Discussion: <CAHeEsBeAe1FeBypT3E8R1ZVZU0e8xv3A-7BHg6bEOi=jZny2Uw@mail.gmail.com>
|
|
This might have been too much of a foot-gun before 9.6, but with the
new commands-end-at-semicolons parsing rule, the only way to get an
empty query into a script is to explicitly write an extra ";".
So we may as well allow the case.
Fabien Coelho
Patch: <alpine.DEB.2.20.1607090922170.3412@sto>
|
|
In particular, left join to pg_authid so that rows in pg_stat_activity
don't disappear if the session's owning user has been dropped.
Also convert a few joins to pg_database to left joins, in the same spirit,
though that case might be harder to hit. We were doing this in other
views already, so it was a bit inconsistent that these views didn't.
Oskari Saarenmaa, with some further tweaking by me
Discussion: <56E87CD8.60007@ohmu.fi>
|
|
Obvious brain fade in set_rel_consider_parallel(). Noticed it while
adjusting the adjacent RTE_FUNCTION case.
In 9.6, also make the code look more like what I just did in HEAD
by removing the unnecessary function_rte_parallel_ok subroutine
(it does nothing that expression_tree_walker wouldn't do).
|
|
We need to scan the whole parse tree for parallel-unsafe functions.
If there are none, we'll later need to determine whether particular
subtrees contain any parallel-restricted functions. The previous coding
retained no knowledge from the first scan, even though this is very
wasteful in the common case where the query contains only parallel-safe
functions. We can bypass all of the later scans by remembering that fact.
This provides a small but measurable speed improvement when the case
applies, and shouldn't cost anything when it doesn't.
Patch by me, reviewed by Robert Haas
Discussion: <3740.1471538387@sss.pgh.pa.us>
|
|
Clobbering errno during cleanup after an error is an oft-repeated, easy
to make mistake. Deal with it here as everywhere else, by saving it
aside and restoring after cleanup, before ereport'ing.
In passing, add a missing errcode declaration in another ereport() call
in the same file, which I noticed while skimming the file looking for
similar problems.
Backpatch to 9.4, where this code was introduced.
|
|
pcolor was used to represent function arguments that are nominally of
type color, but when using a pre-ANSI C compiler would be passed as the
promoted integer type. We really don't need that anymore.
|
|
The regex library used to have a notion of a "collating element" that was
distinct from a "character", but Henry Spencer never actually implemented
his planned support for multi-character collating elements, and the Tcl
crew ripped out most of the stubs for that years ago. The only thing left
that distinguished the "celt" typedef from the "chr" typedef was that
"celt" was supposed to also be able to hold the not-a-character "NOCELT"
value. However, NOCELT was not used anywhere after the MCCE stub removal
changes, which means there's no need for celt to be different from chr.
Removing the separate typedef simplifies matters and also removes a trap
for the unwary, in that celt is signed while chr may not be, so comparisons
could mean different things. There's no bug there today because we
restrict CHR_MAX to be less than INT_MAX, but I think there may have been
such bugs before we did that, and there could be again if anyone ever
decides to fool with the range of chr.
This patch also removes assorted unnecessary casts to "chr" of values
that are already chrs. Many of these seem to be leftover from days when
the code was compatible with pre-ANSI C.
|
|
On some buildfarm animals the isolationtest added in 07ef0351 failed, as
the order in which processes are run after unlocking is not
guaranteed. Add an alternative output for that.
Discussion: <7969.1471484738@sss.pgh.pa.us>
Backpatch: 9.6, like the test in the aforementioned commit
|
|
Per comment in the file, this was fixed around OS X 10.2.
|
|
As usual, we've been pretty awful about maintaining these counts.
They're not all that critical, perhaps, but let's get them right
at release time. Also fix 9.5, which I notice is just as bad.
It's probably wrong further back, but the lack of --help=foo
options before 9.5 makes it too painful to count.
|
|
These types are storage-compatible with real arrays, but they don't support
toasting, so of course they can't support expansion either.
Per bug #14289 from Michael Overmeyer. Back-patch to 9.5 where expanded
arrays were introduced.
Report: <20160818174414.1529.37913@wrigleys.postgresql.org>
|
|
Offer a list of database names; formerly no help was offered.
Ian Barwick, reviewed by Gerdan Santos
Patch: <5724132E.1030804@2ndquadrant.com>
|
|
Offer a list of available versions for that extension. Formerly, since
there was no special support for this, it triggered off the UPDATE
keyword and offered a list of table names --- not too helpful.
Jeff Janes, reviewed by Gerdan Santos
Patch: <CAMkU=1z0gxEOLg2BWa69P4X4Ot8xBxipGUiGkXe_tC+raj79-Q@mail.gmail.com>
|
|
This file had some unusual comment layout. Most of the comments
introducing structs ended up to the right of the screen and following
the start of the struct. Some comments for struct members ended up
after the member definition.
Fix that by moving comments consistently before what they are
describing. Also add missing struct tags where missing so that it is
easier to tell what the struct is.
|
|
All we need is 4 bytes at the moment, for MD5 authentication. But in
upcomint patches for SCRAM authentication, SCRAM will need a salt of
different length. It's less scary for the caller to pass the buffer
length anyway, than assume a certain-sized output buffer.
Author: Michael Paquier
Discussion: <CAB7nPqQvO4sxLFeS9D+NM3wpy08ieZdAj_6e117MQHZAfxBFsg@mail.gmail.com>
|
|
This adds a couple of new timezones that are present in the newer
versions of Windows. It also updates comments to reference UTC rather
than GMT, as this change has been made in Windows.
Michael Paquier
|
|
This way sendAuthRequest doesn't need to know the details of all the
different authentication methods. This is in preparation for adding SCRAM
authentication, which will add yet another authentication request message
type, with different payload.
Reviewed-By: Michael Paquier
Discussion: <CAB7nPqQvO4sxLFeS9D+NM3wpy08ieZdAj_6e117MQHZAfxBFsg@mail.gmail.com>
|
|
INSERT .. ON CONFLICT runs a pre-check of the possible conflicting
constraints before performing the actual speculative insertion. In case
the inserted tuple included TOASTed columns the ON CONFLICT condition
would be handled correctly in case the conflict was caught by the
pre-check, but if two transactions entered the speculative insertion
phase at the same time, one would have to re-try, and the code for
aborting a speculative insertion did not handle deleting the
speculatively inserted TOAST datums correctly.
TOAST deletion would fail with "ERROR: attempted to delete invisible
tuple" as we attempted to remove the TOAST tuples using
simple_heap_delete which reasoned that the given tuples should not be
visible to the command that wrote them.
This commit updates the heap_abort_speculative() function which aborts
the conflicting tuple to use itself, via toast_delete, for deleting
associated TOAST datums. Like before, the inserted toast rows are not
marked as being speculative.
This commit also adds a isolationtester spec test, exercising the
relevant code path. Unfortunately 9.5 cannot handle two waiting
sessions, and thus cannot execute this test.
Reported-By: Viren Negi, Oskari Saarenmaa
Author: Oskari Saarenmaa, edited a bit by me
Bug: #14150
Discussion: <20160519123338.12513.20271@wrigleys.postgresql.org>
Backpatch: 9.5, where ON CONFLICT was introduced
|
|
regexp_match() is like regexp_matches(), but it disallows the 'g' flag
and in consequence does not need to return a set. Instead, it returns
a simple text array value, or NULL if there's no match. Previously people
usually got that behavior with a sub-select, but this way is considerably
more efficient.
Documentation adjusted so that regexp_match() is presented first and then
regexp_matches() is introduced as a more complicated version. This is
a bit historically revisionist but seems pedagogically better.
Still TODO: extend contrib/citext to support this function.
Emre Hasegeli, reviewed by David Johnston
Discussion: <CAE2gYzy42sna2ME_e3y1KLQ-4UBrB-eVF0SWn8QG39sQSeVhEw@mail.gmail.com>
|
|
Slot creation did not clear all fields upon creation. After start the
memory is zeroed, but when a physical replication slot was created in
the shared memory of a previously existing logical slot, catalog_xmin
would not be cleared. That in turn would prevent vacuum from doing its
duties.
To fix initialize all the fields. To make similar future bugs less
likely, zero all of ReplicationSlotPersistentData, and re-order the
rest of the initialization to be in struct member order.
Analysis: Andrew Gierth
Reported-By: md@chewy.com
Author: Michael Paquier
Discussion: <20160705173502.1398.70934@wrigleys.postgresql.org>
Backpatch: 9.4, where replication slots were introduced
|
|
In some cases, exiting out of a plpgsql statement due to an error, then
catching the error in a surrounding exception block, led to leakage of
temporary data the statement was working with, because we kept all such
data in the function-lifespan SPI Proc context. Iterating such behavior
many times within one function call thus led to noticeable memory bloat.
To fix, create an additional memory context meant to have statement
lifespan. Since many plpgsql statements, particularly the simpler/more
common ones, don't need this, create it only on demand. Reset this context
at the end of any statement that uses it, and arrange for exception cleanup
to reset it too, thereby fixing the memory-leak issue. Allow a stack of
such contexts to exist to handle cases where a compound statement needs
statement-lifespan data that persists across calls of inner statements.
While at it, clean up code and improve comments referring to the existing
short-term memory context, which by plpgsql convention is the per-tuple
context of the eval_econtext ExprContext. We now uniformly refer to that
as the eval_mcontext, whereas the new statement-lifespan memory contexts
are called stmt_mcontext.
This change adds some context-creation overhead, but on the other hand
it allows removal of some retail pfree's in favor of context resets.
On balance it seems to be about a wash performance-wise.
In principle this is a bug fix, but it seems too invasive for a back-patch,
and the infrequency of complaints weighs against taking the risk in the
back branches. So we'll fix it only in HEAD, at least for now.
Tom Lane, reviewed by Pavel Stehule
Discussion: <17863.1469142152@sss.pgh.pa.us>
|
|
The performance overhead of this can be significant on Windows, and most
people don't have the tools to view it anyway as Windows does not have
native support for process titles.
Discussion: <0A3221C70F24FB45833433255569204D1F5BE3E8@G01JPEXMBYT05>
Takayuki Tsunakawa
|
|
We implement a dozen or so parameterless functions that the SQL standard
defines special syntax for. Up to now, that was done by converting them
into more or less ad-hoc constructs such as "'now'::text::date". That's
messy for multiple reasons: it exposes what should be implementation
details to users, and performance is worse than it needs to be in several
cases. To improve matters, invent a new expression node type
SQLValueFunction that can represent any of these parameterless functions.
Bump catversion because this changes stored parsetrees for rules.
Discussion: <30058.1463091294@sss.pgh.pa.us>
|
|
I'm not sure which bozo thought it's a problem to use strtol() only
for its endptr result, but silence the warning using same method
used elsewhere.
Report: <f845d3a6-5328-3e2a-924f-f8e91aa2b6d2@2ndquadrant.com>
|
|
This is somewhat cosmetic, since as long as you know what you are looking
at, "10.0" is a serviceable substitute for "10". But there is a potential
for confusion between version numbers with minor numbers and those without
--- we don't want people asking "why is psql saying 10.0 when my server is
10.2". Therefore, back-patch as far as practical, which turns out to be
9.3. I could have redone the patch to use fprintf(stderr) in place of
psql_error(), but it seems more work than is warranted for branches that
will be EOL or nearly so by the time v10 comes out.
Although only psql seems to contain any code that needs this, I chose
to put the support function into fe_utils, since it seems likely we'll
need it in other client programs in future. (In 9.3-9.5, use dumputils.c,
the predecessor of fe_utils/string_utils.c.)
In HEAD, also fix the backend code that whines about loadable-library
version mismatch. I don't see much need to back-patch that.
|
|
From: Alexander Law <exclusion@gmail.com>
|
|
Up to now we've manually adjusted these numbers in several different
Makefiles at the start of each development cycle. While that's not
much work, it's easily forgotten, so let's get rid of it by setting
the SO_MINOR_VERSION values directly from $(MAJORVERSION).
In the case of libpq, this dev cycle's value of SO_MINOR_VERSION happens
to be "10" anyway, so this switch is transparent. For ecpg's shared
libraries, this will result in skipping one or two minor version numbers
between v9.6 and v10, which seems like no big problem; and it was a bit
inconsistent that they didn't have equal minor version numbers anyway.
Discussion: <21969.1471287988@sss.pgh.pa.us>
|
|
Commit af33039317ddc4a0e38a02e2255c2bf453115fd2 aimed to reduce
leakage from tqueue.c, which is good. Unfortunately, by changing the
memory context in which all of gather_readnext() executes, it also
changed the context in which ExecShutdownGatherWorkers executes, which
is not good, because that function eventually causes a call to
ExecParallelRetrieveInstrumentation, which proceeds to allocate
planstate->worker_instrument in a short-lived context, causing a
crash.
Rushabh Lathia, reviewed by Amit Kapila and by me.
|
|
Once upon a time, it made sense for the ecpg preprocessor to have its
own version number, because it used a manually-maintained grammar that
wasn't always in sync with the core grammar. But those days are
thankfully long gone, leaving only a maintenance nuisance behind.
Let's use the PG v10 version numbering changeover as an excuse to get
rid of the ecpg version number and just have ecpg identify itself by
PG_VERSION. From the user's standpoint, ecpg will go from "4.12" in
the 9.6 branch to "10" in the 10 branch, so there's no failure of
monotonicity.
Discussion: <1471332659.4410.67.camel@postgresql.org>
|
|
Prior to commit 7882c3b0b95640e361f1533fe0f2d02e4e5d8610, it was
possible to use LWLocks within DSM segments, but that commit broke
this use case by switching from a doubly linked list to a circular
linked list. Switch back, using a new bit of general infrastructure
for maintaining lists of PGPROCs.
Thomas Munro, reviewed by me.
|
|
Missed this in the main 10devel version stamping patch.
|
|
|
|
This is a good bit more complicated than the average new-version stamping
commit, because it includes various adjustments in pursuit of changing
from three-part to two-part version numbers. It's likely some further
work will be needed around that change; but this is enough to get through
the regression tests, at least in Unix builds.
Peter Eisentraut and Tom Lane
|
|
|
|
Wrap the perltidy invocation into a shell script to reduce the risk of
copy-and-paste errors. Include removal of *.bak files in the script,
so they don't accidentally get committed. Improve the directions in
the README file.
|
|
NUMERIC_MAX_PRECISION is a purely arbitrary constraint on the precision
and scale you can write in a numeric typmod. It might once have had
something to do with the allowed range of a typmod-less numeric value,
but at least since 9.1 we've allowed, and documented that we allowed,
any value that would physically fit in the numeric storage format;
which is something over 100000 decimal digits, not 1000.
Hence, get rid of numeric_in()'s use of NUMERIC_MAX_PRECISION as a limit
on the allowed range of the exponent in scientific-format input. That was
especially silly in view of the fact that you can enter larger numbers as
long as you don't use 'e' to do it. Just constrain the value enough to
avoid localized overflow, and let make_result be the final arbiter of what
is too large. Likewise adjust ecpg's equivalent of this code.
Also get rid of numeric_recv()'s use of NUMERIC_MAX_PRECISION to limit the
number of base-NBASE digits it would accept. That created a dump/restore
hazard for binary COPY without doing anything useful; the wire-format
limit on number of digits (65535) is about as tight as we would want.
In HEAD, also get rid of pg_size_bytes()'s unnecessary intimacy with what
the numeric range limit is. That code doesn't exist in the back branches.
Per gripe from Aravind Kumar. Back-patch to all supported branches,
since they all contain the documentation claim about allowed range of
NUMERIC (cf commit cabf5d84b).
Discussion: <2895.1471195721@sss.pgh.pa.us>
|
|
Per discussion, we should provide such functions to replace the lost
ability to discover AM properties by inspecting pg_am (cf commit
65c5fcd35). The added functionality is also meant to displace any code
that was looking directly at pg_index.indoption, since we'd rather not
believe that the bit meanings in that field are part of any client API
contract.
As future-proofing, define the SQL API to not assume that properties that
are currently AM-wide or index-wide will remain so unless they logically
must be; instead, expose them only when inquiring about a specific index
or even specific index column. Also provide the ability for an index
AM to override the behavior.
In passing, document pg_am.amtype, overlooked in commit 473b93287.
Andrew Gierth, with kibitzing by me and others
Discussion: <87mvl5on7n.fsf@news-spur.riddles.org.uk>
|
|
Apparently that's not obvious to everybody, so let's belabor the point.
In passing, document that DROP POLICY has CASCADE/RESTRICT options (which
it does, per gram.y) but they do nothing (I assume, anyway). Also update
some long-obsolete commentary in gram.y.
Discussion: <20160805104837.1412.84915@wrigleys.postgresql.org>
|
|
EXPLAIN (ANALYZE, TIMING OFF) would print an elapsed time of zero for
a trigger function, because no measurement has been taken but it printed
the field anyway. This isn't what EXPLAIN does elsewhere, so suppress it.
In the same vein, EXPLAIN (ANALYZE, BUFFERS) with non-text output format
would print buffer I/O timing numbers even when no measurement has been
taken because track_io_timing is off. That seems not per policy, either,
so change it.
Back-patch to 9.2 where these features were introduced.
Maksim Milyutin
Discussion: <081c0540-ecaa-bd29-3fd2-6358f3b359a9@postgrespro.ru>
|
|
Commit 14e8803f1 removed LWLocks when accessing MyProc->syncRepState
but didn't clean up the surrounding code and comments.
Cleanup and backpatch to 9.5, to keep code similar.
Julien Rouhaud, improved by suggestion from Michael Paquier,
implemented trivially by myself.
|
|
Commit 874fe3aea changed the command tag returned for CREATE MATVIEW/CREATE
TABLE AS ... WITH NO DATA, but missed that there was code in spi.c that
expected the command tag to always be "SELECT". Fortunately, the
consequence was only an Assert failure, so this oversight should have no
impact in production builds.
Since this code path was evidently un-exercised, add a regression test.
Per report from Shivam Saxena. Back-patch to 9.3, like the previous commit.
Michael Paquier
Report: <97218716-480B-4527-B5CD-D08D798A0C7B@dresources.com>
|
