| Age | Commit message (Collapse) | Author |
|---|
|
* jc/hide-cr-in-diff-from-less:
diff: Help "less" hide ^M from the output
|
|
Otherwise it will always print the class-name rather
than the name of the function inside that class.
While we're at it, reorder the gitattributes manpage to
list the built-in funcname pattern names in alphabetical
order.
Signed-off-by: Andreas Ericsson <ae@op5.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The point of --quiet was to return the status as early as possible without
doing any extra processing. Well behaved scripts, when they expect to run
many diff operations inside, are supposed to run "update-index --refresh"
upfront; we do not want them to pay the price of iterating over the index
and comparing the contents to fix the stat dirtiness, and we avoided most
of the processing in diffcore_std() when --quiet is in effect.
But scripts that adhere to the good practice won't have to pay any more
price than the necessary lstat(2) that will report stat cleanliness, as
long as only -q is given without any fancier diff options.
More importantly, users who do ask for "--quiet -M --filter=D" (in order
to notice only the deletion, not paths that disappeared only because they
have been renamed away) deserve to get the result they asked for, even it
means they have to pay the extra price; the alternative is to get a cheap
early return that gives a result they did not ask for, which is much
worse.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When we enabled the automatic refreshing of the index to "diff" Porcelain,
we disabled it when --find-copies-harder was asked, but there is no good
reason to do so. In the following command sequence, the first "diff"
shows an "empty" diff exposing stat dirtyness, while the second one does
not.
$ >foo
$ git add foo
$ touch foo
$ git diff -C -C
$ git diff -C
This fixes the inconsistency.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This new option --dirstat-by-file is the same as --dirstat, but it
counts "impacted files" instead of "impacted lines" (lines that are
added or removed).
Signed-off-by: Heikki Orsila <heikki.orsila@iki.fi>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/maint-log-grep:
log --author/--committer: really match only with name part
diff --cumulative is a sub-option of --dirstat
bash completion: Hide more plumbing commands
|
|
The option used to be implemented as if it is a totally independent one,
but "git diff --cumulative" would not mean anything without "--dirstat".
This makes --cumulative imply --dirstat.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
With a new configuration "diff.mnemonicprefix", "git diff" shows the
differences between various combinations of preimage and postimage trees
with prefixes different from the standard "a/" and "b/". Hopefully this
will make the distinction stand out for some people.
"git diff" compares the (i)ndex and the (w)ork tree;
"git diff HEAD" compares a (c)ommit and the (w)ork tree;
"git diff --cached" compares a (c)ommit and the (i)ndex;
"git-diff HEAD:file1 file2" compares an (o)bject and a (w)ork tree entity;
"git diff --no-index a b" compares two non-git things (1) and (2).
Because these mnemonics now have meanings, they are swapped when reverse
diff is in effect and this feature is enabled.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When the tracked contents have CRLF line endings, colored diff output
shows "^M" at the end of output lines, which is distracting, even though
the pager we use by default ("less") knows to hide them.
The problem is that "less" hides a carriage-return only at the end of the
line, immediately before a line feed. The colored diff output does not
take this into account, and emits four element sequence for each line:
- force this color;
- the line up to but not including the terminating line feed;
- reset color
- line feed.
By including the carriage return at the end of the line in the second
item, we are breaking the smart our pager has in order not to show "^M".
This can be fixed by changing the sequence to:
- force this color;
- the line up to but not including the terminating end-of-line;
- reset color
- end-of-line.
where end-of-line is either a single linefeed or a CRLF pair. When the
output is not colored, "force this color" and "reset color" sequences are
both empty, so we won't have this problem with or without this patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
tutorial: gentler illustration of Alice/Bob workflow using gitk
pretty=format: respect date format options
make git-shell paranoid about closed stdin/stdout/stderr
Document gitk --argscmd flag.
Fix '--dirstat' with cross-directory renaming
for-each-ref: Allow a trailing slash in the patterns
|
|
The dirstat code depends on the fact that we always generate diffs with
the names sorted, since it then just does a single-pass walk-over of the
sorted list of names and how many changes there were. The sorting means
that all files are nicely grouped by directory.
That all works fine.
Except when we have rename detection, and suddenly the nicely sorted list
of pathnames isn't all that sorted at all. And now the single-pass dirstat
walk gets all confused, and you can get results like this:
[torvalds@nehalem linux]$ git diff --dirstat=2 -M v2.6.27-rc4..v2.6.27-rc5
3.0% arch/powerpc/configs/
6.8% arch/arm/configs/
2.7% arch/powerpc/configs/
4.2% arch/arm/configs/
5.6% arch/powerpc/configs/
8.4% arch/arm/configs/
5.5% arch/powerpc/configs/
23.3% arch/arm/configs/
8.6% arch/powerpc/configs/
4.0% arch/
4.4% drivers/usb/musb/
4.0% drivers/watchdog/
7.6% drivers/
3.5% fs/
The trivial fix is to add a sorting pass, fixing it to:
[torvalds@nehalem linux]$ git diff --dirstat=2 -M v2.6.27-rc4..v2.6.27-rc5
43.0% arch/arm/configs/
25.5% arch/powerpc/configs/
5.3% arch/
4.4% drivers/usb/musb/
4.0% drivers/watchdog/
7.6% drivers/
3.5% fs/
Spot the difference. In case anybody wonders: it's because of a ton of
renames from {include/asm-blackfin => arch/blackfin/include/asm} that just
totally messed up the file ordering in between arch/arm and arch/powerpc.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Find lines with <h1>..<h6> tags.
[jc: while at it, reordered entries to sort alphabetically.]
Signed-off-by: Johan Herland <johan@herland.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Find classes, functions, and methods definitions.
Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Update draft release notes for 1.6.0.1
Add hints to revert documentation about other ways to undo changes
Install templates with the user and group of the installing personality
"git-merge": allow fast-forwarding in a stat-dirty tree
completion: find out supported merge strategies correctly
decorate: allow const objects to be decorated
for-each-ref: cope with tags with incomplete lines
diff --check: do not get confused by new blank lines in the middle
remote.c: remove useless if-before-free test
mailinfo: avoid violating strbuf assertion
git format-patch: avoid underrun when format.headers is empty or all NLs
|
|
The code remembered that the last diff output it saw was an empty line,
and tried to reset that state whenever it sees a context line, a non-blank
new line, or a new hunk. However, this codepath asks the underlying diff
engine to feed diff without any context, and the "just saw an empty line"
state was not reset if you added a new blank line in the last hunk of your
patch, even if it is not the last line of the file.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* bd/diff-strbuf:
xdiff-interface: hide the whole "xdiff_emit_state" business from the caller
Use strbuf for struct xdiff_emit_state's remainder
Make xdi_diff_outf interface for running xdiff_outf diffs
|
|
GNU diff's --suppress-blank-empty option makes it so that diff no
longer outputs trailing white space unless the input data has it.
With this option, empty context lines are now empty also in diff -u output.
Before, they would have a single trailing space.
* diff.c (diff_suppress_blank_empty): New global.
(git_diff_basic_config): Set it.
(fn_out_consume): Honor it.
* t/t4029-diff-trailing-space.sh: New file.
* Documentation/config.txt: Document it.
Signed-off-by: Jim Meyering <meyering@redhat.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This further enhances xdi_diff_outf() interface so that it takes two
common parameters: the callback function that processes one line at a
time, and a pointer to its application specific callback data structure.
xdi_diff_outf() creates its own "xdiff_emit_state" structure and stashes
these two away inside it, which is used by the lowest level output
function in the xdiff_outf() callchain, consume_one(), to call back to the
application layer. With this restructuring, we lift the requirement that
the caller supplied callback data structure embeds xdiff_emit_state
structure as its first member.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
To prepare for the need to initialize and release resources for an
xdi_diff with the xdiff_outf output function, make a new function to
wrap this usage.
Old:
ecb.outf = xdiff_outf;
ecb.priv = &state;
...
xdi_diff(file_p, file_o, &xpp, &xecfg, &ecb);
New:
xdi_diff_outf(file_p, file_o, &state.xm, &xpp, &xecfg, &ecb);
Signed-off-by: Brian Downing <bdowning@lavos.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All BibTeX entries starts with an @ followed by an entry type. Since
there are many entry types and own can be defined, the pattern matches
legal entry type names instead of just the default types (which would
be a long list). The pattern also matches strings and comments since
they will also be useful to position oneself in a bib-file.
Signed-off-by: Gustaf Hendeby <hendeby@isy.liu.se>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Recently "git diff --check" learned to detect new trailing blank lines
just like "git apply --whitespace" does. However this check should not
trigger unconditionally. This patch makes it honor the whitespace
settings from core.whitespace and gitattributes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
RelNotes 1.5.6.5 updates
diff.renamelimit is a basic diff configuration
git-cvsimport.perl: Print "UNKNOWN LINE..." on stderr, not stdout.
Documentation: typos / spelling fixes in older RelNotes
|
|
The configuration was added as a core option in 3299c6f (diff: make
default rename detection limit configurable., 2005-11-15), but 9ce392f
(Move diff.renamelimit out of default configuration., 2005-11-21)
separated diff-related stuff out of the core.
Up to that point it was Ok.
When we separated the Porcelain options out of the git_diff_config in
83ad63c (diff: do not use configuration magic at the core-level,
2006-07-08), we should have been more careful.
This mistake made diff-tree plumbing and git-show Porcelain to notice
different set of renames when the user explicitly asked for rename
detection.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch enhances the tex funcname by adding support for
chapter and part sectioning commands. It also matches
the starred version of the sectioning commands.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Finds classes, records, functions, procedures, and sections. Most lines
need to start at the first column, or else there's no way to differentiate
a procedure's definition from its declaration.
Signed-off-by: Avery Pennarun <apenwarr@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Provide a regexp that catches class, module and method definitions in
Ruby scripts, since the built-in default only finds classes.
Signed-off-by: Giuseppe Bilotta <giuseppe.bilotta@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This patch makes two small changes to improve the output of --inline
and --attach.
The first is to write a newline preceding the boundary. This is needed because
MIME defines the encapsulation boundary as including the preceding CRLF (or in
this case, just LF), so we should be writing one. Without this, the last
newline in the pre-diff content is consumed instead.
The second change is to always write the line termination character
(default: newline) even when using --inline or --attach. This is simply to
improve the aesthetics of the resulting message. When using --inline an email
client should render the resulting message identically to the non-inline
version. And when using --attach this adds a blank line preceding the
attachment in the email, which is visually attractive.
Signed-off-by: Kevin Ballard <kevin@sb.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
Start preparing 1.5.6.4 release notes
git fetch-pack: do not complain about "no common commits" in an empty repo
rebase-i: keep old parents when preserving merges
t7600-merge: Use test_expect_failure to test option parsing
Fix buffer overflow in prepare_attr_stack
Fix buffer overflow in git diff
Fix buffer overflow in git-grep
git-cvsserver: fix call to nonexistant cleanupWorkDir()
Documentation/git-cherry-pick.txt et al.: Fix misleading -n description
Conflicts:
RelNotes
|
|
If PATH_MAX on your system is smaller than a path stored, it may cause
buffer overflow and stack corruption in diff_addremove() and diff_change()
functions when running git-diff
Signed-off-by: Dmitry Potapov <dpotapov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* qq/maint:
clone -q: honor "quiet" option over native transports.
attribute documentation: keep EXAMPLE at end
builtin-commit.c: Use 'git_config_string' to get 'commit.template'
http.c: Use 'git_config_string' to clean up SSL config.
diff.c: Use 'git_config_string' to get 'diff.external'
convert.c: Use 'git_config_string' to get 'smudge' and 'clean'
builtin-log.c: Use 'git_config_string' to get 'format.subjectprefix' and 'format.suffix'
Documentation cvs: Clarify when a bare repository is needed
Documentation: be precise about which date --pretty uses
Conflicts:
Documentation/gitattributes.txt
|
|
Signed-off-by: Brian Hetro <whee@smaertness.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jc/checkdiff:
Fix t4017-diff-retval for white-space from wc
Update sample pre-commit hook to use "diff --check"
diff --check: detect leftover conflict markers
Teach "diff --check" about new blank lines at end
checkdiff: pass diff_options to the callback
check_and_emit_line(): rename and refactor
diff --check: explain why we do not care whether old side is binary
|
|
Before this patch, name_width becomes negative or null for width values
less than 15 and name_width values greater than 25 (default: 50). This
leads to output random data.
This patch checks for minimal width and name_width values.
Signed-off-by: Olivier Marin <dkr@freesurf.fr>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This teaches "diff --check" to detect and complain if the change
adds lines that look like leftover conflict markers.
We should be able to remove the old Perl script used in the sample
pre-commit hook and modernize the script with this facility.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When a patch adds new blank lines at the end, "git apply --whitespace"
warns. This teaches "diff --check" to do the same.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
This way, we could later use more information from the diff_options.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The function name was too bland and not explicit enough as to what it is
checking. Split it into two, and call the one that checks if there is a
whitespace breakage "ws_check()", and call the other one that checks and
emits the line after color coding "ws_check_emit()".
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
All other codepaths refrain from running textual diff when either the old
or the new side is binary, but this function only checks the new side. I
was almost going to change it to check both, but that would be a bad
change. Explain why to prevent future mistakes.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
GIT 1.5.5.5
GIT 1.5.4.6
git-shell: accept "git foo" form
diff --check: do not discard error status upon seeing a good line
|
|
"git diff --check" should return non-zero when there was any whitespace
error but the code only paid attention to the error status of the last
new line in the patch.
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* jk/test:
enable whitespace checking of test scripts
avoid trailing whitespace in zero-change diffstat lines
avoid whitespace on empty line in automatic usage message
mask necessary whitespace policy violations in test scripts
fix whitespace violations in test scripts
|
|
* maint:
diff.c: fix emit_line() again not to add extra line
|
|
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* maint:
diff: reset color before printing newline
|
|
It worked that way since commit 50f575fc (Tweak diff colors,
2006-06-22), but commit c1795bb0 (Unify whitespace checking, 2007-12-13)
changed it. This patch restores the old behaviour.
Besides Linus' arguments in the log message of 50f575fc, resetting color
before printing newline is also important to keep 'git add --patch'
happy. If the last line(s) of a file are removed, then that hunk will
end with a colored line. However, if the newline comes before the color
reset, then the diff output will have an additional line at the end
containing only the reset sequence. This causes trouble in
git-add--interactive.perl's parse_diff function, because @colored will
have one more element than @diff, and that last element will contain the
color reset. The elements of these arrays will then be copied to @hunk,
but only as many as the number of elements in @diff. As a result the
last color reset is lost and all subsequent terminal output will be
printed in color.
Signed-off-by: SZEDER Gábor <szeder@ira.uka.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In some cases, we produce a diffstat line even though no
lines have changed (e.g., because of an exact rename). In
this case, there is no +/- "graph" after the number of
changed lines. However, we output the space separator
unconditionally, meaning that these lines contained a
trailing space character.
This isn't a huge problem, but in cleaning up the output we
are able to eliminate some trailing whitespace from a test
vector.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* js/config-cb:
Provide git_config with a callback-data parameter
Conflicts:
builtin-add.c
builtin-cat-file.c
|
|
The new option --ignore-submodules can now be used to ignore changes in
submodules.
Why? Sometimes it is not interesting when a submodule changed.
For example, when reordering some commits in the superproject, a dirty
submodule is usually totally uninteresting. So we will use this option
in git-rebase to test for a dirty working tree.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
* 'jk/renamelimit' (early part):
diff: make "too many files" rename warning optional
bump rename limit defaults
add merge.renamelimit config option
|
|
git_config() only had a function parameter, but no callback data
parameter. This assumes that all callback functions only modify
global variables.
With this patch, every callback gets a void * parameter, and it is hoped
that this will help the libification effort.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
