| Age | Commit message (Collapse) | Author |
|---|
|
To improve support for symbolic port names in netrc files, this
changes does the following:
- Treat symbolic port names as ports, not protocols in git-credential-netrc
- Validate the SMTP server port provided to send-email
- Convert the above symbolic port names to their numerical values.
Before this change, it was not possible to have a SMTP server port set
to "smtps" in a netrc file (e.g. Emacs' ~/.authinfo.gpg), as it would
be registered as a protocol and break the match for a "smtp" protocol
host, as queried for by git-send-email.
Signed-off-by: Maxim Cournoyer <maxim@guixotic.coop>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Updates to meson-based build procedure.
* rj/build-tweaks-part2:
configure.ac: upgrade to a compilation check for sysinfo
meson.build: correct setting of GIT_EXEC_PATH
meson: correct path to system config/attribute files
meson: correct install location of YAML.pm
meson.build: quote the GITWEBDIR build configuration
|
|
When executing an 'meson install' the YAML.pm file is incorrectly
placed in the <prefix>/share/perl5/Git/SVN directory. The YAML.pm
file should be placed in a 'Memoize' subdirectory instead. In order
to correct the location, update the 'install_dir' of the relevant
target in the 'perl/Git/SVN/Memoize/meson.build' file.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Some distros, notably Fedora, want to install non-core Perl libraries
into specific directory, namely /usr/share/perl5/vendor_perl.
The Makefile build system allows this by overriding perllibdir variable,
let's make meson works on par with our Makefile.
Signed-off-by: Đoàn Trần Công Danh <congdanhqx@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
`generate_perl_command` needs `depends: [git_version_file]` and the uses
in top-level meson.build were fine, but the ones in perl/ weren't, causing
parallel build failures in some cases as GIT-BUILD-OPTIONS wasn't yet
available.
Signed-off-by: Sam James <sam@gentoo.org>
Acked-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Introduce support for the Meson build system, a "modern" meta build
system that supports many different platforms, including Linux, macOS,
Windows and BSDs. Meson supports different backends, including Ninja,
Xcode and Microsoft Visual Studio. Several common IDEs provide an
integration with it.
The biggest contender compared to Meson is probably CMake as outlined in
our "Documentation/technical/build-systems.txt" file. Based on my own
personal experience from working with both build systems extensively I
strongly favor Meson over CMake. In my opinion, it feels significantly
easier to use with a syntax that feels more like a "real" programming
language. The second big reason is that Meson supports Rust natively,
which may prove to be important given that the project may pick up Rust
as another language eventually.
Using Meson is rather straight-forward. An example:
```
# Meson uses out-of-tree builds. You can set up multiple build
# directories, how you name them is completely up to you.
$ mkdir build
$ cd build
$ meson setup .. -Dprefix=/tmp/git-installation
# Build the project. This also provides several other targets like
e.g. `install` or `test`.
$ ninja
# Meson has been wired up to support execution of our test suites.
# Both our unit tests and our integration tests are supported.
# Running `meson test` without any arguments will execute all tests,
# but the syntax supports globbing to select only some tests.
$ meson test 't-*'
# Execute single test interactively to allow for debugging.
$ meson test 't0000-*' --interactive --test-args=-ix
```
The build instructions have been successfully tested on the following
systems, tests are passing:
- Apple macOS 10.15.
- FreeBSD 14.1.
- NixOS 24.11.
- OpenBSD 7.6.
- Ubuntu 24.04.
- Windows 10 with Cygwin.
- Windows 10 with MinGW64, except for t9700, which is also broken with
our Makefile.
- Windows 10 with Visual Studio 2022 toolchain, using the Native Tools
Command Prompt with `meson setup --vsenv`. Tests pass, except for
t9700.
- Windows 10 with Visual Studio 2022 solution, using the Native Tools
Command Prompt with `meson setup --backend vs2022`. Tests pass,
except for t9700.
- Windows 10 with VS Code, using the Meson plug-in.
It is expected that there will still be rough edges in the current
version. If this patch lands the expectation is that it will coexist
with our other build systems for a while. Like this, distributions can
slowly migrate over to Meson and report any findings they have to us
such that we can continue to iterate. A potential cutoff date for other
build systems may be Git 3.0.
Some notes:
- The installed distribution is structured somewhat differently than
how it used to be the case. All of our binaries are installed into
`$libexec/git-core`, while all binaries part of `$bindir` are now
symbolic links pointing to the former. This rule is consistent in
itself and thus easier to reason about.
- We do not install dashed binaries into `$libexec/git-core` anymore,
so there won't e.g. be a symlink for git-add(1). These are not
required by modern Git and there isn't really much of a use case for
those anymore. By not installing those symlinks we thus start the
deprecation of this layout.
- We're targeting Meson 1.3.0, which has been released relatively
recently November 2023. The only feature we use from that version is
`fs.relative_to()`, which we could replace if necessary. If so, we
could start to target Meson 1.0.0 and newer, released in December
2022.
- The whole build instructions count around 3300 lines, half of which
is listing all of our code and test files. Our Makefiles are around
5000 lines, autoconf adds another 1300 lines. CMake in comparison
has only 1200 linescode, but it avoids listing individual files and
does not wire up auto-configuration as extensively as the Meson
instructions do.
- We bundle a set of subproject wrappers for curl, expat, openssl,
pcre2 and zlib. This allows developers to build Git without these
dependencies preinstalled, and Meson will fetch and build them
automatically. This is especially helpful on Windows.
Helped-by: Eli Schwartz <eschwartz@gentoo.org>
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
We have a bunch of placeholders in our scripts that we replace at build
time, for example by using sed(1). These placeholders come in three
different formats: @PLACEHOLDER@, @@PLACEHOLDER@@ and ++PLACEHOLDER++.
Next to being inconsistent it also creates a bit of a problem with
CMake, which only supports the first syntax in its `configure_file()`
function. To work around that we instead manually replace placeholders
via string operations, which is a hassle and removes safeguards that
CMake has to verify that we didn't forget to replace any placeholders.
Besides that, other build systems like Meson also support the CMake
syntax.
Unify our codebase to consistently use the syntax supported by such
build systems.
Signed-off-by: Patrick Steinhardt <ps@pks.im>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Our platform support policy states that we require "versions of
dependencies which are generally accepted as stable and supportable,
e.g., in line with the version used by other long-term-support
distributions". Of Debian, Ubuntu, RHEL, and SLES, the four most common
distributions that provide LTS versions, the version with mainstream
long-term security support with the oldest Perl is 5.26.0 in SLES 15.6.
This is a major upgrade, since Perl 5.8.1, according to the Perl
documentation, was released in September of 2003. It brings a lot of
new features that we can choose to use, such as s///r to return the
modified string, the postderef functionality, and subroutine signatures,
although the latter was still considered experimental until 5.36.
This change was made with the following one-liner, which intentionally
excludes modifying the vendored modules we include to avoid conflicts:
git grep -l 'use 5.008001' | grep -v 'LoadCPAN/' | xargs perl -pi -e 's/use 5.008001/require v5.26/'
Use require instead of use to avoid changing the behavior as the latter
enables features and the former does not.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Taylor Blau <me@ttaylorr.com>
|
|
Typofixes.
* ak/typofix-2.46-maint:
perl: fix a typo
mergetool: fix a typo
reftable: fix a typo
trace2: fix typos
|
|
Fix a typo in comments.
Signed-off-by: Andrew Kreimer <algonell@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In Git 2.39, Git.pm stopped working in a bare repository, which has
been corrected.
* jk/git-pm-bare-repo-fix:
Git.pm: use "rev-parse --absolute-git-dir" rather than perl code
Git.pm: fix bare repository search with Directory option
|
|
When we open a repository with the "Directory" option, we use "rev-parse
--git-dir" to get the path relative to that directory, and then use
Cwd::abs_path() to make it absolute (since our process working directory
may not be the same).
These days we can just ask for "--absolute-git-dir" instead, which saves
us a little code. That option was added in Git v2.13.0 via a2f5a87626
(rev-parse: add '--absolute-git-dir' option, 2017-02-03). I don't think
we make any promises about running mismatched versions of git and
Git.pm, but even if somebody tries it, that's sufficiently old that it
should be OK.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When opening a bare repository like:
Git->repository(Directory => '/path/to/bare.git');
we will incorrectly point the repository object at the _current_
directory, not the one specified by the option.
The bug was introduced by 20da61f25f (Git.pm: trust rev-parse to find
bare repositories, 2022-10-22). Before then, we'd ask "rev-parse
--git-dir" if it was a Git repo, and if it returned anything, we'd
correctly convert that result to an absolute path using File::Spec and
Cwd::abs_path(). If it didn't, we'd guess it might be a bare repository
and find it ourselves, which was wrong (rev-parse should find even a
bare repo, and our search circumvented some of its rules).
That commit dropped most of the custom bare-repo search code in favor of
using "rev-parse --is-bare-repository" and trusting the "--git-dir" it
returned. But it mistakenly left some of the bare-repo code path in
place, which was now broken. That code calls Cwd::abs_path($dir); prior
to 20da61f25f $dir contained the "Directory" option the user passed in.
But afterwards, it contains the output of "rev-parse --git-dir". And
since our tentative rev-parse command is invoked after changing
directory, it will always be the relative path "."! So we'll end up with
the absolute path of the process's current directory, not the Directory
option the caller asked for.
So the non-bare case is correct, but the bare one is broken. Our tests
only check the non-bare one, so we didn't notice. We can fix this by
running the same absolute-path fixup code for both sides.
Helped-by: Rodrigo <rodrigolive@gmail.com>
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Subversion 1.8 added a new property `svn:global-ignores`. It
contains a list of patterns used to determine what files should
be ignored. If Git-SVN is going to ignore these files as well, it
is important that we do not skip over directories that have this
property set.
Signed-off-by: Alex Galvin <agalvin@comqi.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
command_bidi_pipe takes the git command and optional arguments as an
array, not a string. Make sure the documentation example is usable
code.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Stale URLs have been updated to their current counterparts (or
archive.org) and HTTP links are replaced with working HTTPS links.
* js/update-urls-in-doc-and-comment:
doc: refer to internet archive
doc: update links for andre-simon.de
doc: switch links to https
doc: update links to current pages
|
|
These sites offer https versions of their content.
Using the https versions provides some protection for users.
Signed-off-by: Josh Soref <jsoref@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The following commit will make use of a Getopt::Long feature which is
only present in Perl >= 5.8.1. Document that as the minimum version we
support.
Many of our Perl scripts will continue to run with 5.8.0 but this change
allows us to adjust them as needed without breaking any promises to our
users.
The Perl requirement was last changed in d48b284183 (perl: bump the
required Perl version to 5.8 from 5.6.[21], 2010-09-24). At that time,
5.8.0 was 8 years old. It is now over 21 years old.
Signed-off-by: Todd Zullinger <tmz@pobox.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When initializing a repository object, we run "git rev-parse --git-dir"
to let the C version of Git find the correct directory. But curiously,
if this fails we don't automatically say "not a git repository".
Instead, we do our own pure-perl check to see if we're in a bare
repository.
This makes little sense, as rev-parse will report both bare and non-bare
directories. This logic comes from d5c7721d58 (Git.pm: Add support for
subdirectories inside of working copies, 2006-06-24), but I don't see
any reason given why we can't just rely on rev-parse. Worse, because we
treat any non-error response from rev-parse as a non-bare repository,
we'll erroneously set the object's WorkingCopy, even in a bare
repository.
But it gets worse. Since 8959555cee (setup_git_directory(): add an owner
check for the top-level directory, 2022-03-02), it's actively wrong (and
dangerous). The perl code doesn't implement the same ownership checks.
And worse, after "finding" the bare repository, it sets GIT_DIR in the
environment, which tells any subsequent Git commands that we've
confirmed the directory is OK, and to trust us. I.e., it re-opens the
vulnerability plugged by 8959555cee when using Git.pm's repository
discovery code.
We can fix this by just relying on rev-parse to tell us when we're not
in a repository, which fixes the vulnerability. Furthermore, we'll ask
its --is-bare-repository function to tell us if we're bare or not, and
rely on that.
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
When attempting to initialize a repository object in an unsafe
directory, a syntax error is reported (Can't use string as a HASH ref
while strict refs in use). Fix this runtime error by adding the required
semicolon after the catch statement.
Without the semicolon, the result of the following line (i.e., the
result of Cwd::abs_path) is passed as the third argument to Error.pm's
catch function. That function expects that its third argument,
$clauses, is a hash reference, and trying to access a string as a hash
reference is a fatal error.
[1] https://lore.kernel.org/git/20221011182607.f1113fff-9333-427d-ba45-741a78fa6040@korelogic.com/
Reported-by: Hank Leininger <hlein@korelogic.com>
Signed-off-by: Michael McClimon <michael@mcclimon.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Fix misbehavior in Git.pm that dates back to the very first version of
the library in git.git added in b1edc53d062 (Introduce Git.pm (v4),
2006-06-24). When we fail to execute a command we shouldn't ignore all
signals, those can happen e.g. if abort() is called, or if the command
segfaults.
Because of this we'd consider e.g. a command that died due to LSAN
exiting with abort() successful, as is the case with the tests listed
as running successfully with SANITIZE=leak in 9081a421a6d (checkout:
fix "branch info" memory leaks, 2021-11-16). We did run them
successfully, but only because we ignored these errors.
This was then made worse by the use of "abort_on_error=1" for LSAN
added in 85b81b35ff9 (test-lib: set LSAN_OPTIONS to abort by default,
2017-09-05). Doing that makes sense, but without providing that option
we'd have a "$? >> 8" of "23" on failure, with abort_on_error=1 we'll
get "0".
All of our tests pass even without the SIGPIPE exception being added
here, but as the code appears to have been trying to ignore it let's
keep ignoring it for now.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The "GIT_TEST_FSYNC" environment variable now exists for
disabling fsync() even on packfiles and other "critical" data.
Running "make test -j8 NO_SVN_TESTS=1" on a noisy 8-core system
on an HDD, test runtime drops from ~4 minutes down to ~3 minutes.
Using "GIT_TEST_FSYNC=1" re-enables fsync() for comparison
purposes.
SVN interopability tests are minimally affected since SVN will
still use fsync in various places.
This will also be useful for 3rd-party tools which create
throwaway git repositories of temporary data, but remains
undocumented for end users.
Signed-off-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git send-email" optimization.
* ab/send-email-optim:
perl: nano-optimize by replacing Cwd::cwd() with Cwd::getcwd()
send-email: move trivial config handling to Perl
perl: lazily load some common Git.pm setup code
send-email: lazily load modules for a big speedup
send-email: get rid of indirect object syntax
send-email: use function syntax instead of barewords
send-email: lazily shell out to "git var"
send-email: lazily load config for a big speedup
send-email: copy "config_regxp" into git-send-email.perl
send-email: refactor sendemail.smtpencryption config parsing
send-email: remove non-working support for "sendemail.smtpssl"
send-email tests: test for boolean variables without a value
send-email tests: support GIT_TEST_PERL_FATAL_WARNINGS=true
|
|
The "-m" option in "git log -m" that does not specify which format,
if any, of diff is desired did not have any visible effect; it now
implies some form of diff (by default "--patch") is produced.
* so/log-m-implies-p:
diff-merges: let "-m" imply "-p"
diff-merges: rename "combined_imply_patch" to "merges_imply_patch"
stash list: stop passing "-m" to "git log"
git-svn: stop passing "-m" to "git rev-list"
diff-merges: move specific diff-index "-m" handling to diff-index
t4013: test "git diff-index -m"
t4013: test "git diff-tree -m"
t4013: test "git log -m --stat"
t4013: test "git log -m --raw"
t4013: test that "-m" alone has no effect in "git log"
|
|
It has been pointed out[1] that cwd() invokes "pwd(1)" while getcwd()
is a Perl-native XS function. For what we're using these for we can
use getcwd().
The performance difference is miniscule, we're saving on the order of
a millisecond or so, see [2] below for the benchmark. I don't think
this matters in practice for optimizing git-send-email or perl
execution (unlike the patches leading up to this one).
But let's do it regardless of that, if only so we don't have to think
about this as a low-hanging fruit anymore.
1. https://lore.kernel.org/git/20210512180517.GA11354@dcvr/
2.
$ perl -MBenchmark=:all -MCwd -wE 'cmpthese(10000, { getcwd => sub { getcwd }, cwd => sub { cwd }, pwd => sub { system "pwd >/dev/null" }})'
(warning: too few iterations for a reliable count)
Rate pwd cwd getcwd
pwd 982/s -- -48% -100%
cwd 1890/s 92% -- -100%
getcwd 10000000000000000000/s 1018000000000000000% 529000000000000064% -
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Instead of unconditionally requiring modules such as File::Spec, let's
only load them when needed. This speeds up code that only needs a
subset of the features Git.pm provides.
This brings a plain invocation of "git send-email" down from 52/37
loaded modules under NO_GETTEXT=[|Y] to 39/18, and it now takes
~60-~70ms instead of ~80-~90ms. The runtime of t9001-send-email.sh
test is down to ~13s from ~15s.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Code simplification.
* ab/send-email-inline-hooks-path:
send-email: move "hooks_path" invocation to git-send-email.perl
send-email: don't needlessly abs_path() the core.hooksPath
|
|
Move the newly added "hooks_path" API in Git.pm to its only user in
git-send-email.perl. This was added in c8243933c74 (git-send-email:
Respect core.hooksPath setting, 2021-03-23), meaning that it hasn't
yet made it into a non-rc release of git.
The consensus with Git.pm is that we need to be considerate of
out-of-tree users who treat it as a public documented interface. We
should therefore be less willing to add new functionality to it, least
we be stuck supporting it after our own uses for it disappear.
In this case the git-send-email.perl hook invocation will probably be
replaced by a future "git hook run" command, and in the commit
preceding this one the "hooks_path" become nothing but a trivial
wrapper for "rev-parse --git-path hooks" anyway (with no
Cwd::abs_path() call), so let's just inline this command in
git-send-email.perl itself.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In c8243933c74 (git-send-email: Respect core.hooksPath setting,
2021-03-23) we started supporting core.hooksPath in "send-email". It's
been reported that on Windows[1] doing this by calling abs_path()
results in different canonicalizations of the absolute path.
This wasn't an issue in c8243933c74 itself, but was revealed by my
ea7811b37e0 (git-send-email: improve --validate error output,
2021-04-06) when we started emitting the path to the hook, which was
previously only internal to git-send-email.perl.
The just-landed 53753a37d09 (t9001-send-email.sh: fix expected
absolute paths on Windows, 2021-05-24) narrowly fixed this issue, but
I believe we can do better here. We should not be relying on whatever
changes Perl's abs_path() makes to the path "rev-parse --git-path
hooks" hands to us. Let's instead trust it, and hand it to Perl's
system() in git-send-email.perl. It will handle either a relative or
absolute path.
So let's revert most of 53753a37d09 and just have "hooks_path" return
what we get from "rev-parse" directly without modification. This has
the added benefit of making the error message friendlier in the common
case, we'll no longer print an absolute path for repository-local hook
errors.
1. http://lore.kernel.org/git/bb30fe2b-cd75-4782-24a6-08bb002a0367@kdbg.org
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
rev-list doesn't utilize -m. It happens to eat it silently, so this
bug went unnoticed.
Signed-off-by: Sergey Organov <sorganov@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change the logic of the i18n functions I added in 5e9637c6297 (i18n:
add infrastructure for translating Git with gettext, 2011-11-18) to
use pass-through functions when NO_GETTEXT is defined.
This speeds up the compilation time of commands that use this library
when NO_GETTEXT=Y is in effect. Loading it and POSIX.pm is around 20ms
on my machine, whereas it takes 2ms to just instantiate perl itself.
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
get-send-email currently makes the assumption that the
'sendemail-validate' hook exists inside of the repository.
Since the introduction of 'core.hooksPath' configuration option in
867ad08a261 (hooks: allow customizing where the hook directory is,
2016-05-04), this is no longer true.
Instead of assuming a hardcoded repo relative path, query
git for the actual path of the hooks directory.
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Dev support.
* jk/perl-warning:
perl: check for perl warnings while running tests
|
|
A recent oid->hash conversion missed one spot, breaking "git svn".
* bc/svn-hash-oid-fix:
svn: use correct variable name for short OID
|
|
We set "use warnings" in most of our perl code to catch problems. But as
the name implies, warnings just emit a message to stderr and don't
otherwise affect the program. So our tests are quite likely to miss that
warnings are being spewed, as most of them do not look at stderr.
We could ask perl to make all warnings fatal, but this is likely
annoying for non-developers, who would rather have a running program
with a warning than something that refuses to work at all.
So instead, let's teach the perl code to respect an environment variable
(GIT_PERL_FATAL_WARNINGS) to increase the severity of the warnings. This
can be set for day-to-day running if people want to be really pedantic,
but the primary use is to trigger it within the test suite.
We could also trigger that for every test run, but likewise even the
tests failing may be annoying to distro builders, etc (just as -Werror
would be for compiling C code). So we'll tie it to a special test-mode
variable (GIT_TEST_PERL_FATAL_WARNINGS) that can be set in the
environment or as a Makefile knob, and we'll automatically turn the knob
when DEVELOPER=1 is set. That should give developers and CI the more
careful view without disrupting normal users or packagers.
Note that the mapping from the GIT_TEST_* form to the GIT_* form in
test-lib.sh is necessary even if they had the same name: the perl
scripts need it to be normalized to a perl truth value, and we also have
to make sure it's exported (we might have gotten it from the
environment, but we might also have gotten it from GIT-BUILD-OPTIONS
directly).
Signed-off-by: Jeff King <peff@peff.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The commit 9ab33150a0 ("perl: create and switch variables for hash
constants", 2020-06-22) converted each instance of the variable
$sha1_short into $oid_short in the Subversion code, since git-svn now
understands SHA-256. However, one conversion was missed.
As a result, Perl complains about the use of this variable:
Use of uninitialized value $sha1_short in regexp compilation at
/usr/lib64/perl5/vendor_perl/5.30.3/Git/SVN/Log.pm line 301, <$fh>
line 6.
Because we're parsing raw diff output here, the likelihood is very low
that we'll actually misparse the data, since the only lines we're going
to get starting with colons are the ones we're expecting. Even if we
had a newline in a path, we'd end up with a quoted path. Our regex is
just less strict than we'd like it to be.
However, it's obviously undesirable that our code is emitting Perl
warnings, so let's convert it to use the proper variable name.
Reported-by: Nikos Chantziaras <realnc@gmail.com>
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
I've seen several people mis-configure git send-email on their first
attempt because they set the sendmail.* config options - not
sendemail.*. This patch detects this mistake and bails out with a
friendly warning.
Signed-off-by: Drew DeVault <sir@cmpwn.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
There are several places throughout git-svn that use various hard-coded
constants. For matching object IDs, use the $oid variable. Compute the
record size we use for our revision storage based on the object ID.
When parsing the revision map format, use a wildcard in the pack format
since we know that the data we're parsing is always exactly the record
size. This lets us continue to use a constant for the pack format.
Finally, update several comments to reflect the fact that an object ID
may be of one of multiple sizes.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Acked-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Most of the Git modules, git-svn excepted, don't know anything about the
hash algorithm and mostly work. However, when we're printing an
all-zero object ID in Git::IndexInfo, we need to know the hash length.
Since we don't want to change the API to have that information passed
in, let's query the config to find the hash algorithm and compute the
right value.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Acked-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
git-svn has several variables for SHA-1 constants, including short hash
values and full length hash values. Since these are no longer SHA-1
specific, let's start them with "oid" instead of "sha1". Add a
constant, oid_length, which is the length of the hash algorithm in use
in hex. We use the hex version because overwhelmingly that's what's
used by git-svn.
We don't currently set oid_length based on the repository algorithm, but
we will in a future commit.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Acked-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Reported-by: Jens Schleusener <Jens.Schleusener@fossies.org>
Signed-off-by: Elijah Newren <newren@gmail.com>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
In some cases, the svn author names might contain leading or trailing
whitespaces, leading to messages such as:
Author: user1
not defined in authors.txt
(the trailing newline leads to the line break). The user "user1" is
defined in authors.txt though, e.g.
user1 = User <user1@example.com>
Fix this by trimming the author name retreived from svn before using it
in check_author.
Helped-by: Eric Sunshine <sunshine@sunshineco.com>
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The cat_blob function was matching on exactly 40 hex characters. This
won't work with SHA-256, which uses 64-character hex object IDs. While
it should be fine to simply match any number of hex characters since the
output is space delimited, be extra safe by matching either exactly 40
or exactly 64 hex characters.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
"git svn" had a minor thinko/typo which has been fixed.
* ab/git-svn-get-record-typofix:
git-svn: avoid warning on undef readline()
|
|
A build-time option has been added to allow Git to be told to refer
to its associated files relative to the main binary, in the same
way that has been possible on Windows for quite some time, for
Linux, BSDs and Darwin.
* dj/runtime-prefix:
Makefile: quote $INSTLIBDIR when passing it to sed
Makefile: remove unused @@PERLLIBDIR@@ substitution variable
mingw/msvc: use the new-style RUNTIME_PREFIX helper
exec_cmd: provide a new-style RUNTIME_PREFIX helper for Windows
exec_cmd: RUNTIME_PREFIX on some POSIX systems
Makefile: add Perl runtime prefix support
Makefile: generate Perl header from template file
|
|
Broaden the RUNTIME_PREFIX flag to configure Git's Perl scripts to
locate the Git installation's Perl support libraries by resolving
against the script's path, rather than hard-coding that path at
build-time. Hard-coding at build time worked on previous
RUNTIME_PREFIX configurations (i.e., Windows) because the Perl
scripts were run within a virtual filesystem whose paths were
consistent regardless of the location of the actual installation.
This will no longer be the case for non-Windows RUNTIME_PREFIX users.
When enabled, RUNTIME_PREFIX now requires Perl's system paths to be
expressed relative to a common installation directory in the Makefile,
and uses that relationship to locate support files based on the known
starting point of the script being executed, much like RUNTIME_PREFIX
does for the Git binary.
This change enables Git's Perl scripts to work when their Git installation
is relocated or moved to another system, even when they are not in a
virtual filesystem environment.
Signed-off-by: Dan Jacques <dnj@google.com>
Thanks-to: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Thanks-to: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Currently, the generated Perl script headers are emitted by commands in
the Makefile. This mechanism restricts options to introduce alternative
header content, needed by Perl runtime prefix support, and obscures the
origin of the Perl script header.
Change the Makefile to generate a header by processing a template file and
move the header content into the "perl/" subdirectory. The generated
header content will now be stored in the "GIT-PERL-HEADER" file. This
allows the content of the Perl header to be controlled by changing the path
of the template in the Makefile.
Signed-off-by: Dan Jacques <dnj@google.com>
Thanks-to: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Thanks-to: Johannes Schindelin <johannes.schindelin@gmx.de>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
Change code in Git.pm that sometimes calls chomp() on undef to only do
so the value is defined.
This code has been chomping undef values ever since it was added in
b26098fc2f ("git-svn: reduce scope of input record separator change",
2016-10-14), but started warning due to the introduction of "use
warnings" to Git.pm in my f0e19cb7ce ("Git.pm: add the "use warnings"
pragma", 2018-02-25) released with 2.17.0.
Since this function will return undef in those cases it's still
possible that the code using it will warn if it does a chomp of its
own, as the code added in b26098fc2f ("git-svn: reduce scope of input
record separator change", 2016-10-14) might do, but since git-svn has
"use warnings" already that's clearly not a codepath that's going to
warn.
See https://public-inbox.org/git/86h8oobl36.fsf@phe.ftfl.ca/ for the
original report.
Reported-by: Joseph Mingrone <jrm@ftfl.ca>
Signed-off-by: Ævar Arnfjörð Bjarmason <avarab@gmail.com>
Improved-by: Eric Wong <e@80x24.org>
Signed-off-by: Junio C Hamano <gitster@pobox.com>
|
|
The email address in --authors-file and --authors-prog can be empty but
git-svn translated it into a fictional email address in the form
jondoe <jondoe@6aafaa21e0fb4338a68ab372a049893d>
containing the SVN repository UUID. Now git-svn behaves like git-commit:
If the email is *explicitly* set to the empty string using '<>', the
commit does not contain an email address, only the name:
jondoe <>
Allowing to remove the email address *intentionally* prevents automatic
systems from sending emails to those fictional addresses and avoids
cluttering the log output with unnecessary stuff.
Signed-off-by: Andreas Heiduk <asheiduk@gmail.com>
Signed-off-by: Eric Wong <e@80x24.org>
|
|
Clean-up to various pieces of Perl code we have.
* ab/perl-fixes:
perl Git::LoadCPAN: emit better errors under NO_PERL_CPAN_FALLBACKS
Makefile: add NO_PERL_CPAN_FALLBACKS knob
perl: move the perl/Git/FromCPAN tree to perl/FromCPAN
perl: generalize the Git::LoadCPAN facility
perl: move CPAN loader wrappers to another namespace
perl: update our copy of Mail::Address
perl: update our ancient copy of Error.pm
git-send-email: unconditionally use Net::{SMTP,Domain}
Git.pm: hard-depend on the File::{Temp,Spec} modules
gitweb: hard-depend on the Digest::MD5 5.8 module
Git.pm: add the "use warnings" pragma
Git.pm: remove redundant "use strict" from sub-package
perl: *.pm files should not have the executable bit
|
