ALSA: hda/tas2781: A workaround solution to lower-vol issue among lower calibrated-impedance micro-speaker on TAS2781

On TAS2781, if the Speaker calibrated impedance is lower than default
value hard-coded inside the TAS2781, it will cuase vol lower than
normal. In order to fix this issue, the parameter of SineGainI need
updating.

Signed-off-by: Shenghao Ding <shenghao-ding@ti.com>
Tested-by: Matthew Schwartz <matthew.schwartz@linux.dev>
Link: https://patch.msgid.link/20260227144641.1243-1-shenghao-ding@ti.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>

3 files changed, 98 insertions, 12 deletions

diff --git a/include/sound/tas2781.h b/include/sound/tas2781.h
index 7c03bdc951bb..e847cf51878c 100644
--- a/include/sound/tas2781.h
+++ b/include/sound/tas2781.h
@@ -151,6 +151,7 @@ struct tasdevice {
 	struct bulk_reg_val *cali_data_backup;
 	struct bulk_reg_val alp_cali_bckp;
 	struct tasdevice_fw *cali_data_fmw;
+	void *cali_specific;
 	unsigned int dev_addr;
 	unsigned int err_code;
 	unsigned char cur_book;
diff --git a/sound/hda/codecs/side-codecs/tas2781_hda_i2c.c b/sound/hda/codecs/side-codecs/tas2781_hda_i2c.c
index 74c3cf1e45e1..67240ce184e1 100644
--- a/sound/hda/codecs/side-codecs/tas2781_hda_i2c.c
+++ b/sound/hda/codecs/side-codecs/tas2781_hda_i2c.c
@@ -60,7 +60,6 @@ struct tas2781_hda_i2c_priv {
 	int (*save_calibration)(struct tas2781_hda *h);
 
 	int hda_chip_id;
-	bool skip_calibration;
 };
 
 static int tas2781_get_i2c_res(struct acpi_resource *ares, void *data)
@@ -479,8 +478,7 @@ static void tasdevice_dspfw_init(void *context)
 	/* If calibrated data occurs error, dsp will still works with default
 	 * calibrated data inside algo.
 	 */
-	if (!hda_priv->skip_calibration)
-		hda_priv->save_calibration(tas_hda);
+	hda_priv->save_calibration(tas_hda);
 }
 
 static void tasdev_fw_ready(const struct firmware *fmw, void *context)
@@ -535,7 +533,6 @@ static int tas2781_hda_bind(struct device *dev, struct device *master,
 	void *master_data)
 {
 	struct tas2781_hda *tas_hda = dev_get_drvdata(dev);
-	struct tas2781_hda_i2c_priv *hda_priv = tas_hda->hda_priv;
 	struct hda_component_parent *parent = master_data;
 	struct hda_component *comp;
 	struct hda_codec *codec;
@@ -564,14 +561,6 @@ static int tas2781_hda_bind(struct device *dev, struct device *master,
 		break;
 	}
 
-	/*
-	 * Using ASUS ROG Xbox Ally X (RC73XA) UEFI calibration data
-	 * causes audio dropouts during playback, use fallback data
-	 * from DSP firmware as a workaround.
-	 */
-	if (codec->core.subsystem_id == 0x10431384)
-		hda_priv->skip_calibration = true;
-
 	guard(pm_runtime_active_auto)(dev);
 
 	comp->dev = dev;
@@ -643,6 +632,7 @@ static int tas2781_hda_i2c_probe(struct i2c_client *clt)
 		 */
 		device_name = "TIAS2781";
 		hda_priv->hda_chip_id = HDA_TAS2781;
+		tas_hda->priv->chip_id = TAS2781;
 		hda_priv->save_calibration = tas2781_save_calibration;
 		tas_hda->priv->global_addr = TAS2781_GLOBAL_ADDR;
 	} else if (strstarts(dev_name(&clt->dev), "i2c-TXNW2770")) {
@@ -656,6 +646,7 @@ static int tas2781_hda_i2c_probe(struct i2c_client *clt)
 			     "i2c-TXNW2781:00-tas2781-hda.0")) {
 		device_name = "TXNW2781";
 		hda_priv->hda_chip_id = HDA_TAS2781;
+		tas_hda->priv->chip_id = TAS2781;
 		hda_priv->save_calibration = tas2781_save_calibration;
 		tas_hda->priv->global_addr = TAS2781_GLOBAL_ADDR;
 	} else if (strstr(dev_name(&clt->dev), "INT8866")) {
diff --git a/sound/soc/codecs/tas2781-fmwlib.c b/sound/soc/codecs/tas2781-fmwlib.c
index c969eb38704e..5798d518d94c 100644
--- a/sound/soc/codecs/tas2781-fmwlib.c
+++ b/sound/soc/codecs/tas2781-fmwlib.c
@@ -32,6 +32,10 @@
 #define TAS2781_YRAM1_PAGE			42
 #define TAS2781_YRAM1_START_REG			88
 
+#define TAS2781_PG_REG		TASDEVICE_REG(0x00, 0x00, 0x7c)
+#define TAS2781_PG_1_0		0xA0
+#define TAS2781_PG_2_0		0xA8
+
 #define TAS2781_YRAM2_START_PAGE		43
 #define TAS2781_YRAM2_END_PAGE			49
 #define TAS2781_YRAM2_START_REG			8
@@ -98,6 +102,12 @@ struct blktyp_devidx_map {
 	unsigned char dev_idx;
 };
 
+struct tas2781_cali_specific {
+	unsigned char sin_gni[4];
+	int sin_gni_reg;
+	bool is_sin_gn_flush;
+};
+
 static const char deviceNumber[TASDEVICE_DSP_TAS_MAX_DEVICE] = {
 	1, 2, 1, 2, 1, 1, 0, 2, 4, 3, 1, 2, 3, 4, 1, 2
 };
@@ -2454,6 +2464,84 @@ static int tasdevice_load_data(struct tasdevice_priv *tas_priv,
 	return ret;
 }
 
+static int tas2781_cali_preproc(struct tasdevice_priv *priv, int i)
+{
+	struct tas2781_cali_specific *spec = priv->tasdevice[i].cali_specific;
+	struct calidata *cali_data = &priv->cali_data;
+	struct cali_reg *p = &cali_data->cali_reg_array;
+	unsigned char *data = cali_data->data;
+	int rc;
+
+	/*
+	 * On TAS2781, if the Speaker calibrated impedance is lower than
+	 * default value hard-coded inside the TAS2781, it will cuase vol
+	 * lower than normal. In order to fix this issue, the parameter of
+	 * SineGainI need updating.
+	 */
+	if (spec == NULL) {
+		int k = i * (cali_data->cali_dat_sz_per_dev + 1);
+		int re_org, re_cal, corrected_sin_gn, pg_id;
+		unsigned char r0_deflt[4];
+
+		spec = devm_kzalloc(priv->dev, sizeof(*spec), GFP_KERNEL);
+		if (spec == NULL)
+			return -ENOMEM;
+		priv->tasdevice[i].cali_specific = spec;
+		rc = tasdevice_dev_bulk_read(priv, i, p->r0_reg, r0_deflt, 4);
+		if (rc < 0) {
+			dev_err(priv->dev, "invalid RE from %d = %d\n", i, rc);
+			return rc;
+		}
+		/*
+		 * SineGainI need to be re-calculated, calculate the high 16
+		 * bits.
+		 */
+		re_org = r0_deflt[0] << 8 | r0_deflt[1];
+		re_cal = data[k + 1] << 8 | data[k + 2];
+		if (re_org > re_cal) {
+			rc = tasdevice_dev_read(priv, i, TAS2781_PG_REG,
+						 &pg_id);
+			if (rc < 0) {
+				dev_err(priv->dev, "invalid PG id %d = %d\n",
+					i, rc);
+				return rc;
+			}
+
+			spec->sin_gni_reg = (pg_id == TAS2781_PG_1_0) ?
+				TASDEVICE_REG(0, 0x1b, 0x34) :
+				TASDEVICE_REG(0, 0x18, 0x1c);
+
+			rc = tasdevice_dev_bulk_read(priv, i,
+						      spec->sin_gni_reg,
+						      spec->sin_gni, 4);
+			if (rc < 0) {
+				dev_err(priv->dev, "wrong sinegaini %d = %d\n",
+					i, rc);
+				return rc;
+			}
+			corrected_sin_gn = re_org * ((spec->sin_gni[0] << 8) +
+						       spec->sin_gni[1]);
+			corrected_sin_gn /= re_cal;
+			spec->sin_gni[0] = corrected_sin_gn >> 8;
+			spec->sin_gni[1] = corrected_sin_gn & 0xff;
+
+			spec->is_sin_gn_flush = true;
+		}
+	}
+
+	if (spec->is_sin_gn_flush) {
+		rc = tasdevice_dev_bulk_write(priv, i, spec->sin_gni_reg,
+						       spec->sin_gni, 4);
+		if (rc < 0) {
+			dev_err(priv->dev, "update failed %d = %d\n",
+				i, rc);
+			return rc;
+		}
+	}
+
+	return 0;
+}
+
 static void tasdev_load_calibrated_data(struct tasdevice_priv *priv, int i)
 {
 	struct calidata *cali_data = &priv->cali_data;
@@ -2469,6 +2557,12 @@ static void tasdev_load_calibrated_data(struct tasdevice_priv *priv, int i)
 	}
 	k++;
 
+	if (priv->chip_id == TAS2781) {
+		rc = tas2781_cali_preproc(priv, i);
+		if (rc < 0)
+			return;
+	}
+
 	rc = tasdevice_dev_bulk_write(priv, i, p->r0_reg, &(data[k]), 4);
 	if (rc < 0) {
 		dev_err(priv->dev, "chn %d r0_reg bulk_wr err = %d\n", i, rc);