fscrypt: fix left shift underflow when inode->i_blkbits > PAGE_SHIFT

When simulating an nvme device on qemu with both logical_block_size and
physical_block_size set to 8 KiB, an error trace appears during
partition table reading at boot time. The issue is caused by
inode->i_blkbits being larger than PAGE_SHIFT, which leads to a left
shift of -1 and triggering a UBSAN warning.

[    2.697306] ------------[ cut here ]------------
[    2.697309] UBSAN: shift-out-of-bounds in fs/crypto/inline_crypt.c:336:37
[    2.697311] shift exponent -1 is negative
[    2.697315] CPU: 3 UID: 0 PID: 274 Comm: (udev-worker) Not tainted 6.18.0-rc2+ #34 PREEMPT(voluntary)
[    2.697317] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[    2.697320] Call Trace:
[    2.697324]  <TASK>
[    2.697325]  dump_stack_lvl+0x76/0xa0
[    2.697340]  dump_stack+0x10/0x20
[    2.697342]  __ubsan_handle_shift_out_of_bounds+0x1e3/0x390
[    2.697351]  bh_get_inode_and_lblk_num.cold+0x12/0x94
[    2.697359]  fscrypt_set_bio_crypt_ctx_bh+0x44/0x90
[    2.697365]  submit_bh_wbc+0xb6/0x190
[    2.697370]  block_read_full_folio+0x194/0x270
[    2.697371]  ? __pfx_blkdev_get_block+0x10/0x10
[    2.697375]  ? __pfx_blkdev_read_folio+0x10/0x10
[    2.697377]  blkdev_read_folio+0x18/0x30
[    2.697379]  filemap_read_folio+0x40/0xe0
[    2.697382]  filemap_get_pages+0x5ef/0x7a0
[    2.697385]  ? mmap_region+0x63/0xd0
[    2.697389]  filemap_read+0x11d/0x520
[    2.697392]  blkdev_read_iter+0x7c/0x180
[    2.697393]  vfs_read+0x261/0x390
[    2.697397]  ksys_read+0x71/0xf0
[    2.697398]  __x64_sys_read+0x19/0x30
[    2.697399]  x64_sys_call+0x1e88/0x26a0
[    2.697405]  do_syscall_64+0x80/0x670
[    2.697410]  ? __x64_sys_newfstat+0x15/0x20
[    2.697414]  ? x64_sys_call+0x204a/0x26a0
[    2.697415]  ? do_syscall_64+0xb8/0x670
[    2.697417]  ? irqentry_exit_to_user_mode+0x2e/0x2a0
[    2.697420]  ? irqentry_exit+0x43/0x50
[    2.697421]  ? exc_page_fault+0x90/0x1b0
[    2.697422]  entry_SYSCALL_64_after_hwframe+0x76/0x7e
[    2.697425] RIP: 0033:0x75054cba4a06
[    2.697426] Code: 5d e8 41 8b 93 08 03 00 00 59 5e 48 83 f8 fc 75 19 83 e2 39 83 fa 08 75 11 e8 26 ff ff ff 66 0f 1f 44 00 00 48 8b 45 10 0f 05 <48> 8b 5d f8 c9 c3 0f 1f 40 00 f3 0f 1e fa 55 48 89 e5 48 83 ec 08
[    2.697427] RSP: 002b:00007fff973723a0 EFLAGS: 00000202 ORIG_RAX: 0000000000000000
[    2.697430] RAX: ffffffffffffffda RBX: 00005ea9a2c02760 RCX: 000075054cba4a06
[    2.697432] RDX: 0000000000002000 RSI: 000075054c190000 RDI: 000000000000001b
[    2.697433] RBP: 00007fff973723c0 R08: 0000000000000000 R09: 0000000000000000
[    2.697434] R10: 0000000000000000 R11: 0000000000000202 R12: 0000000000000000
[    2.697434] R13: 00005ea9a2c027c0 R14: 00005ea9a2be5608 R15: 00005ea9a2be55f0
[    2.697436]  </TASK>
[    2.697436] ---[ end trace ]---

This situation can happen for block devices because when
CONFIG_TRANSPARENT_HUGEPAGE is enabled, the maximum logical_block_size
is 64 KiB. set_init_blocksize() then sets the block device
inode->i_blkbits to 13, which is within this limit.

File I/O does not trigger this problem because for filesystems that do
not support the FS_LBS feature, sb_set_blocksize() prevents
sb->s_blocksize_bits from being larger than PAGE_SHIFT. During inode
allocation, alloc_inode()->inode_init_always() assigns inode->i_blkbits
from sb->s_blocksize_bits. Currently, only xfs_fs_type has the FS_LBS
flag, and since xfs I/O paths do not reach submit_bh_wbc(), it does not
hit the left-shift underflow issue.

Signed-off-by: Yongpeng Yang <yangyongpeng@xiaomi.com>
Fixes: 47dd67532303 ("block/bdev: lift block size restrictions to 64k")
Cc: stable@vger.kernel.org
[EB: use folio_pos() and consolidate the two shifts by i_blkbits]
Link: https://lore.kernel.org/r/20251105003642.42796-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@kernel.org>

1 files changed, 1 insertions, 2 deletions

diff --git a/fs/crypto/inline_crypt.c b/fs/crypto/inline_crypt.c
index 5dee7c498bc8..ed6e926226b5 100644
--- a/fs/crypto/inline_crypt.c
+++ b/fs/crypto/inline_crypt.c
@@ -333,8 +333,7 @@ static bool bh_get_inode_and_lblk_num(const struct buffer_head *bh,
 	inode = mapping->host;
 
 	*inode_ret = inode;
-	*lblk_num_ret = ((u64)folio->index << (PAGE_SHIFT - inode->i_blkbits)) +
-			(bh_offset(bh) >> inode->i_blkbits);
+	*lblk_num_ret = (folio_pos(folio) + bh_offset(bh)) >> inode->i_blkbits;
 	return true;
 }