Merge bk://bk.arm.linux.org.uk/linux-2.6-rmk

into ppc970.osdl.org:/home/torvalds/v2.6/linux

8 files changed, 151 insertions, 149 deletions

diff --git a/arch/arm/boot/bootp/init.S b/arch/arm/boot/bootp/init.S
index fc4cc2fb1e1b..df7bc7068d0f 100644
--- a/arch/arm/boot/bootp/init.S
+++ b/arch/arm/boot/bootp/init.S
@@ -20,8 +20,10 @@
 		.type	_start, #function
 		.globl	_start
 
-_start:		adr	r13, data
+_start:		add	lr, pc, #-0x8		@ lr = current load addr
+		adr	r13, data
 		ldmia	r13!, {r4-r6}		@ r5 = dest, r6 = length
+		add	r4, r4, lr		@ r4 = initrd_start + load addr
 		bl	move			@ move the initrd
 
 /*
diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 052cef493743..797292aa0805 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -11,7 +11,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
 #
 CONFIG_EXPERIMENTAL=y
 # CONFIG_CLEAN_COMPILE is not set
-CONFIG_STANDALONE=y
 CONFIG_BROKEN=y
 CONFIG_BROKEN_ON_SMP=y
 
@@ -20,17 +19,24 @@ CONFIG_BROKEN_ON_SMP=y
 #
 CONFIG_SWAP=y
 CONFIG_SYSVIPC=y
+# CONFIG_POSIX_MQUEUE is not set
 # CONFIG_BSD_PROCESS_ACCT is not set
 CONFIG_SYSCTL=y
+# CONFIG_AUDIT is not set
 CONFIG_LOG_BUF_SHIFT=16
+# CONFIG_HOTPLUG is not set
 # CONFIG_IKCONFIG is not set
 # CONFIG_EMBEDDED is not set
 CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
+CONFIG_IOSCHED_CFQ=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 
 #
 # Loadable module support
@@ -44,58 +50,32 @@ CONFIG_KMOD=y
 #
 # System Type
 #
-# CONFIG_ARCH_ADIFCC is not set
-# CONFIG_ARCH_ANAKIN is not set
 # CONFIG_ARCH_CLPS7500 is not set
 # CONFIG_ARCH_CLPS711X is not set
 # CONFIG_ARCH_CO285 is not set
-# CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_EBSA110 is not set
 # CONFIG_ARCH_CAMELOT is not set
 # CONFIG_ARCH_FOOTBRIDGE is not set
 # CONFIG_ARCH_INTEGRATOR is not set
 # CONFIG_ARCH_IOP3XX is not set
+# CONFIG_ARCH_IXP4XX is not set
 # CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_PXA is not set
 # CONFIG_ARCH_RPC is not set
 # CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_SHARK is not set
 CONFIG_ARCH_S3C2410=y
-
-#
-# CLPS711X/EP721X Implementations
-#
-
-#
-# Epxa10db
-#
-
-#
-# Footbridge Implementations
-#
-
-#
-# IOP3xx Implementation Options
-#
-# CONFIG_ARCH_IOP310 is not set
-# CONFIG_ARCH_IOP321 is not set
-
-#
-# IOP3xx Chipset Features
-#
-
-#
-# Intel PXA250/210 Implementations
-#
-
-#
-# SA11x0 Implementations
-#
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_VERSATILE_PB is not set
 
 #
 # S3C2410 Implementations
 #
 CONFIG_ARCH_BAST=y
 CONFIG_ARCH_H1940=y
+CONFIG_ARCH_SMDK2410=y
+CONFIG_MACH_VR1000=y
 
 #
 # Processor Type
@@ -120,9 +100,8 @@ CONFIG_CPU_TLB_V4WBI=y
 # General setup
 #
 # CONFIG_ZBOOT_ROM is not set
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZBOOT_ROM_BSS=0
-# CONFIG_HOTPLUG is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
 
 #
 # At least one math emulation must be selected
@@ -130,6 +109,7 @@ CONFIG_ZBOOT_ROM_BSS=0
 CONFIG_FPE_NWFPE=y
 CONFIG_FPE_NWFPE_XP=y
 # CONFIG_FPE_FASTFPE is not set
+# CONFIG_VFP is not set
 CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_AOUT=y
 # CONFIG_BINFMT_MISC is not set
@@ -137,6 +117,9 @@ CONFIG_BINFMT_AOUT=y
 #
 # Generic Driver Options
 #
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_DEBUG_DRIVER is not set
 # CONFIG_PM is not set
 # CONFIG_PREEMPT is not set
 # CONFIG_ARTHUR is not set
@@ -149,7 +132,6 @@ CONFIG_ALIGNMENT_TRAP=y
 CONFIG_PARPORT=y
 CONFIG_PARPORT_PC=y
 CONFIG_PARPORT_PC_CML1=y
-# CONFIG_PARPORT_SERIAL is not set
 CONFIG_PARPORT_PC_FIFO=y
 CONFIG_PARPORT_PC_SUPERIO=y
 # CONFIG_PARPORT_ARC is not set
@@ -180,9 +162,20 @@ CONFIG_MTD_CFI=y
 # CONFIG_MTD_JEDECPROBE is not set
 CONFIG_MTD_GEN_PROBE=y
 # CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
 # CONFIG_MTD_CFI_AMDSTD is not set
 # CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
 # CONFIG_MTD_ROM is not set
 # CONFIG_MTD_ABSENT is not set
@@ -200,6 +193,7 @@ CONFIG_MTD_CFI_INTELEXT=y
 # Self-contained MTD device drivers
 #
 # CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
 # CONFIG_MTD_BLKMTD is not set
 
@@ -218,7 +212,6 @@ CONFIG_MTD_CFI_INTELEXT=y
 #
 # Plug and Play support
 #
-# CONFIG_PNP is not set
 
 #
 # Block devices
@@ -259,23 +252,21 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_ARPD is not set
-# CONFIG_INET_ECN is not set
 # CONFIG_SYN_COOKIES is not set
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
 # CONFIG_IPV6 is not set
-# CONFIG_DECNET is not set
-# CONFIG_BRIDGE is not set
 # CONFIG_NETFILTER is not set
 
 #
 # SCTP Configuration (EXPERIMENTAL)
 #
-CONFIG_IPV6_SCTP__=y
 # CONFIG_IP_SCTP is not set
 # CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
 # CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
@@ -291,11 +282,17 @@ CONFIG_IPV6_SCTP__=y
 # QoS and/or fair queueing
 #
 # CONFIG_NET_SCHED is not set
+# CONFIG_NET_CLS_ROUTE is not set
 
 #
 # Network testing
 #
 # CONFIG_NET_PKTGEN is not set
+# CONFIG_NETPOLL is not set
+# CONFIG_NET_POLL_CONTROLLER is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
 CONFIG_NETDEVICES=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
@@ -316,40 +313,25 @@ CONFIG_NET_ETHERNET=y
 #
 # Ethernet (10000 Mbit)
 #
-# CONFIG_PLIP is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
 
 #
-# Wireless LAN (non-hamradio)
+# Token Ring devices
 #
-# CONFIG_NET_RADIO is not set
-# CONFIG_HOSTAP is not set
 
 #
-# Token Ring devices
+# Wireless LAN (non-hamradio)
 #
-# CONFIG_SHAPER is not set
+# CONFIG_NET_RADIO is not set
 
 #
 # Wan interfaces
 #
 # CONFIG_WAN is not set
-
-#
-# Amateur Radio support
-#
-# CONFIG_HAMRADIO is not set
-
-#
-# IrDA (infrared) support
-#
-# CONFIG_IRDA is not set
-
-#
-# Bluetooth support
-#
-# CONFIG_BT is not set
+# CONFIG_PLIP is not set
+# CONFIG_PPP is not set
+# CONFIG_SLIP is not set
+# CONFIG_SHAPER is not set
+# CONFIG_NETCONSOLE is not set
 
 #
 # ATA/ATAPI/MFM/RLL support
@@ -360,9 +342,9 @@ CONFIG_BLK_DEV_IDE=y
 #
 # Please see Documentation/ide.txt for help/info on IDE drives
 #
+# CONFIG_BLK_DEV_IDE_SATA is not set
 CONFIG_BLK_DEV_IDEDISK=y
 # CONFIG_IDEDISK_MULTI_MODE is not set
-# CONFIG_IDEDISK_STROKE is not set
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_BLK_DEV_IDETAPE=m
 CONFIG_BLK_DEV_IDEFLOPPY=m
@@ -372,10 +354,10 @@ CONFIG_BLK_DEV_IDEFLOPPY=m
 #
 # IDE chipset support/bugfixes
 #
-CONFIG_BLK_DEV_IDE_BAST=y
+CONFIG_IDE_GENERIC=y
+# CONFIG_IDE_ARM is not set
 # CONFIG_BLK_DEV_IDEDMA is not set
 # CONFIG_IDEDMA_AUTO is not set
-# CONFIG_DMA_NONPCI is not set
 # CONFIG_BLK_DEV_HD is not set
 
 #
@@ -384,13 +366,22 @@ CONFIG_BLK_DEV_IDE_BAST=y
 # CONFIG_SCSI is not set
 
 #
+# Fusion MPT device support
+#
+
+#
+# IEEE 1394 (FireWire) support
+#
+# CONFIG_IEEE1394 is not set
+
+#
 # I2O device support
 #
 
 #
 # ISDN subsystem
 #
-# CONFIG_ISDN_BOOL is not set
+# CONFIG_ISDN is not set
 
 #
 # Input device support
@@ -406,7 +397,6 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 # CONFIG_INPUT_JOYDEV is not set
 # CONFIG_INPUT_TSDEV is not set
-# CONFIG_INPUT_TSLIBDEV is not set
 # CONFIG_INPUT_EVDEV is not set
 # CONFIG_INPUT_EVBUG is not set
 
@@ -427,12 +417,13 @@ CONFIG_SERIO_SERPORT=y
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=y
 # CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
 # CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
-# CONFIG_MOUSE_PS2_SYNAPTICS is not set
 # CONFIG_MOUSE_SERIAL is not set
+# CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
 # CONFIG_INPUT_MISC is not set
@@ -451,8 +442,6 @@ CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_DIGI is not set
 # CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
-# CONFIG_ISI is not set
-# CONFIG_SYNCLINK is not set
 # CONFIG_SYNCLINKMP is not set
 # CONFIG_N_HDLC is not set
 # CONFIG_RISCOM8 is not set
@@ -480,15 +469,37 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_S3C2410=y
 CONFIG_SERIAL_S3C2410_CONSOLE=y
 CONFIG_SERIAL_BAST_SIO=y
-# CONFIG_SERIAL_DZ is not set
 CONFIG_SERIAL_CORE=y
 CONFIG_SERIAL_CORE_CONSOLE=y
 CONFIG_UNIX98_PTYS=y
-CONFIG_UNIX98_PTY_COUNT=256
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_PRINTER=y
 # CONFIG_LP_CONSOLE is not set
 CONFIG_PPDEV=y
 # CONFIG_TIPAR is not set
+# CONFIG_QIC02_TAPE is not set
+
+#
+# IPMI
+#
+# CONFIG_IPMI_HANDLER is not set
+
+#
+# Watchdog Cards
+#
+# CONFIG_WATCHDOG is not set
+# CONFIG_NVRAM is not set
+CONFIG_RTC=y
+# CONFIG_DTLK is not set
+# CONFIG_R3964 is not set
+
+#
+# Ftape, the floppy tape device driver
+#
+# CONFIG_AGP is not set
+# CONFIG_DRM is not set
+# CONFIG_RAW_DRIVER is not set
 
 #
 # I2C support
@@ -507,55 +518,46 @@ CONFIG_I2C_ALGOBIT=m
 #
 # CONFIG_I2C_AMD756 is not set
 # CONFIG_I2C_AMD8111 is not set
-# CONFIG_I2C_PHILIPSPAR is not set
+# CONFIG_I2C_ISA is not set
+# CONFIG_I2C_PARPORT is not set
+# CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_SCx200_ACB is not set
 
 #
-# I2C Hardware Sensors Chip support
+# Hardware Sensors Chip support
 #
 CONFIG_I2C_SENSOR=m
 # CONFIG_SENSORS_ADM1021 is not set
-CONFIG_SENSORS_EEPROM=m
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ASB100 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_FSCHER is not set
+# CONFIG_SENSORS_GL518SM is not set
 # CONFIG_SENSORS_IT87 is not set
 CONFIG_SENSORS_LM75=m
+# CONFIG_SENSORS_LM77 is not set
 CONFIG_SENSORS_LM78=m
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
 CONFIG_SENSORS_LM85=m
-# CONFIG_SENSORS_VIA686A is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83627HF is not set
 
 #
-# L3 serial bus support
-#
-# CONFIG_L3 is not set
-
-#
-# Mice
-#
-# CONFIG_BUSMOUSE is not set
-# CONFIG_QIC02_TAPE is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-# CONFIG_WATCHDOG is not set
-# CONFIG_NVRAM is not set
-CONFIG_RTC=y
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-
-#
-# Ftape, the floppy tape device driver
+# Other I2C Chip support
 #
-# CONFIG_FTAPE is not set
-# CONFIG_AGP is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
+CONFIG_SENSORS_EEPROM=m
+# CONFIG_SENSORS_PCF8574 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_RTC8564 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
 
 #
 # Multimedia devices
@@ -568,11 +570,6 @@ CONFIG_RTC=y
 # CONFIG_DVB is not set
 
 #
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
 # File systems
 #
 CONFIG_EXT2_FS=y
@@ -611,8 +608,8 @@ CONFIG_VFAT_FS=y
 # Pseudo filesystems
 #
 CONFIG_PROC_FS=y
+CONFIG_SYSFS=y
 # CONFIG_DEVFS_FS is not set
-CONFIG_DEVPTS_FS=y
 # CONFIG_DEVPTS_FS_XATTR is not set
 # CONFIG_TMPFS is not set
 # CONFIG_HUGETLBFS is not set
@@ -625,14 +622,20 @@ CONFIG_RAMFS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
 # CONFIG_BEFS_FS is not set
 # CONFIG_BFS_FS is not set
 # CONFIG_EFS_FS is not set
 CONFIG_JFFS_FS=y
 CONFIG_JFFS_FS_VERBOSE=0
+# CONFIG_JFFS_PROC_FS is not set
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 # CONFIG_JFFS2_FS_NAND is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
 # CONFIG_CRAMFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_HPFS_FS is not set
@@ -652,12 +655,11 @@ CONFIG_ROOT_NFS=y
 CONFIG_LOCKD=y
 # CONFIG_EXPORTFS is not set
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_GSS is not set
+# CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_SMB_FS is not set
 # CONFIG_CIFS is not set
 # CONFIG_NCP_FS is not set
 # CONFIG_CODA_FS is not set
-# CONFIG_INTERMEZZO_FS is not set
 # CONFIG_AFS_FS is not set
 
 #
@@ -675,16 +677,15 @@ CONFIG_BSD_DISKLABEL=y
 CONFIG_SOLARIS_X86_PARTITION=y
 # CONFIG_UNIXWARE_DISKLABEL is not set
 # CONFIG_LDM_PARTITION is not set
-# CONFIG_NEC98_PARTITION is not set
 # CONFIG_SGI_PARTITION is not set
 # CONFIG_ULTRIX_PARTITION is not set
 # CONFIG_SUN_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
-CONFIG_NLS=y
 
 #
 # Native Language Support
 #
+CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_CODEPAGE_437 is not set
 # CONFIG_NLS_CODEPAGE_737 is not set
@@ -709,6 +710,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_ISO8859_8 is not set
 # CONFIG_NLS_CODEPAGE_1250 is not set
 # CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
 # CONFIG_NLS_ISO8859_1 is not set
 # CONFIG_NLS_ISO8859_2 is not set
 # CONFIG_NLS_ISO8859_3 is not set
@@ -725,6 +727,11 @@ CONFIG_NLS_DEFAULT="iso8859-1"
 # CONFIG_NLS_UTF8 is not set
 
 #
+# Profiling support
+#
+# CONFIG_PROFILING is not set
+
+#
 # Graphics support
 #
 CONFIG_FB=y
@@ -744,21 +751,20 @@ CONFIG_DUMMY_CONSOLE=y
 # CONFIG_LOGO is not set
 
 #
-# Misc devices
+# Sound
 #
+# CONFIG_SOUND is not set
 
 #
-# Multimedia Capabilities Port drivers
+# Misc devices
 #
-# CONFIG_MCP is not set
 
 #
-# Console Switches
+# USB support
 #
-# CONFIG_SWITCHES is not set
 
 #
-# USB support
+# USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
 
@@ -776,7 +782,6 @@ CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_BUGVERBOSE is not set
 # CONFIG_DEBUG_ERRORS is not set
 CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_PRINTK=y
 # CONFIG_DEBUG_ICEDCC is not set
 CONFIG_DEBUG_S3C2410_PORT=y
 CONFIG_DEBUG_S3C2410_UART=0
@@ -794,6 +799,8 @@ CONFIG_DEBUG_S3C2410_UART=0
 #
 # Library routines
 #
+# CONFIG_CRC_CCITT is not set
 CONFIG_CRC32=y
+# CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index b71f89e11a73..40e78bc4460a 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -23,9 +23,12 @@ config ARCH_SMDK2410
            <http://www.fsforth.de>
 
 config MACH_VR1000
-	bool "Simtec VR1000"
+	bool "Thorcom VR1000"
 	help
-	  Say Y here if you are using the Simtec VR1000 board.
+	  Say Y here if you are using the Thorcom VR1000 board.
+
+	  This linux port is currently being maintained by Simtec, on behalf
+	  of Thorcom. Any queries, please contact Thorcom first.
 
 endmenu
 
diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c
index fb180732b860..bfadbd4254f8 100644
--- a/arch/arm/mach-s3c2410/mach-smdk2410.c
+++ b/arch/arm/mach-s3c2410/mach-smdk2410.c
@@ -101,7 +101,7 @@ void __init smdk2410_init_irq(void)
 
 void __init smdk2410_init_time(void)
 {
-	s3c2401_init_time();
+	s3c2410_init_time();
 }
 
 MACHINE_START(SMDK2410, "SMDK2410") /* @TODO: request a new identifier and switch
diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c
index 2246a30cea54..aae341c6908f 100644
--- a/arch/arm/mach-s3c2410/mach-vr1000.c
+++ b/arch/arm/mach-s3c2410/mach-vr1000.c
@@ -11,6 +11,7 @@
  * published by the Free Software Foundation.
  *
  * Modifications:
+ *     06-Aug-2004 BJD  Fixed call to time initialisation
  *     12-Jul-2004 BJD  Renamed machine
  *     16-May-2003 BJD  Created initial version
  *     16-Aug-2003 BJD  Fixed header files and copyright, added URL
@@ -159,7 +160,7 @@ void __init vr1000_init_irq(void)
 
 void __init vr1000_init_time(void)
 {
-	s3c2401_init_time();
+	s3c2410_init_time();
 }
 
 MACHINE_START(VR1000, "Thorcom-VR1000")
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index a38a1ffecbee..29be1c018949 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -66,9 +66,7 @@ void show_pte(struct mm_struct *mm, unsigned long addr)
 		/* We must not map this if we have highmem enabled */
 		pte = pte_offset_map(pmd, addr);
 		printk(", *pte=%08lx", pte_val(*pte));
-#ifdef CONFIG_CPU_32
 		printk(", *ppte=%08lx", pte_val(pte[-PTRS_PER_PTE]));
-#endif
 		pte_unmap(pte);
 #endif
 	} while(0);
diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c
index db6ebc236727..060fea2e10cb 100644
--- a/arch/arm/mm/init.c
+++ b/arch/arm/mm/init.c
@@ -24,13 +24,7 @@
 #include <asm/mach/arch.h>
 #include <asm/mach/map.h>
 
-#ifdef CONFIG_CPU_32
-#define TABLE_OFFSET	(PTRS_PER_PTE)
-#else
-#define TABLE_OFFSET	0
-#endif
-
-#define TABLE_SIZE	((TABLE_OFFSET + PTRS_PER_PTE) * sizeof(pte_t))
+#define TABLE_SIZE	(2 * PTRS_PER_PTE * sizeof(pte_t))
 
 DEFINE_PER_CPU(struct mmu_gather, mmu_gathers);
 
@@ -289,14 +283,13 @@ static __init void reserve_node_zero(unsigned int bootmap_pfn, unsigned int boot
 	 */
 	reserve_bootmem_node(pgdat, __pa(&_stext), &_end - &_stext);
 
-#ifdef CONFIG_CPU_32
 	/*
 	 * Reserve the page tables.  These are already in use,
 	 * and can only be in node 0.
 	 */
 	reserve_bootmem_node(pgdat, __pa(swapper_pg_dir),
 			     PTRS_PER_PGD * sizeof(pgd_t));
-#endif
+
 	/*
 	 * And don't forget to reserve the allocator bitmap,
 	 * which will be freed later.
diff --git a/drivers/video/sa1100fb.c b/drivers/video/sa1100fb.c
index a15f0c4302aa..ae8fb7aef251 100644
--- a/drivers/video/sa1100fb.c
+++ b/drivers/video/sa1100fb.c
@@ -1291,8 +1291,7 @@ static void sa1100fb_enable_controller(struct sa1100fb_info *fbi)
 #error Where is GPIO24 set as an output?  Can we fit this in somewhere else?
 	if (machine_is_graphicsclient()) {
 		// From ADS doc again...same as disable
-		set_current_state(TASK_UNINTERRUPTIBLE);
-		schedule_timeout(20 * HZ / 1000);
+		msleep(20);
 		GPSR |= GPIO_GPIO24;
 	}
 #endif
@@ -1327,8 +1326,7 @@ static void sa1100fb_disable_controller(struct sa1100fb_info *fbi)
 		 * We'll wait 20msec.
 		 */
 		GPCR |= GPIO_GPIO24;
-		set_current_state(TASK_UNINTERRUPTIBLE);
-		schedule_timeout(20 * HZ / 1000);
+		msleep(20);
 	}
 #endif
 #ifdef CONFIG_SA1100_HUW_WEBPANEL