[ARM PATCH] 2416/1: S3C2410 - default configuration update

Patch from Ben Dooks

Update default configuraiton, configure support for the
common flash chips seen on 2410 board.

Signed-off-by: Ben Dooks
Signed-off-by: Russell King

1 files changed, 39 insertions, 6 deletions

diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig
index 907ec6a2c297..e8c2255aae91 100644
--- a/arch/arm/configs/s3c2410_defconfig
+++ b/arch/arm/configs/s3c2410_defconfig
@@ -1,12 +1,13 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.10-rc2
-# Mon Nov 15 15:29:42 2004
+# Linux kernel version: 2.6.11-rc1-bk5
+# Tue Jan 18 11:36:49 2005
 #
 CONFIG_ARM=y
 CONFIG_MMU=y
 CONFIG_UID16=y
 CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_IOMAP=y
 
 #
@@ -123,12 +124,20 @@ CONFIG_CPU_TLB_V4WBI=y
 #
 # General setup
 #
-# CONFIG_ZBOOT_ROM is not set
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 # CONFIG_XIP_KERNEL is not set
 
 #
+# PCCARD (PCMCIA/CardBus) support
+#
+# CONFIG_PCCARD is not set
+
+#
+# PC-card bridges
+#
+
+#
 # At least one math emulation must be selected
 #
 CONFIG_FPE_NWFPE=y
@@ -143,6 +152,7 @@ CONFIG_BINFMT_AOUT=y
 #
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
 # CONFIG_DEBUG_DRIVER is not set
 CONFIG_PM=y
 # CONFIG_PREEMPT is not set
@@ -168,6 +178,7 @@ CONFIG_MTD=y
 CONFIG_MTD_PARTITIONS=y
 # CONFIG_MTD_CONCAT is not set
 CONFIG_MTD_REDBOOT_PARTS=y
+CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y
 # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set
 CONFIG_MTD_CMDLINE_PARTS=y
@@ -200,13 +211,15 @@ CONFIG_MTD_CFI_I2=y
 # CONFIG_MTD_CFI_I4 is not set
 # CONFIG_MTD_CFI_I8 is not set
 CONFIG_MTD_CFI_INTELEXT=y
-# CONFIG_MTD_CFI_AMDSTD is not set
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_CFI_AMDSTD_RETRY=0
 # CONFIG_MTD_CFI_STAA is not set
 CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
+CONFIG_MTD_ROM=y
 # CONFIG_MTD_ABSENT is not set
 # CONFIG_MTD_OBSOLETE_CHIPS is not set
+# CONFIG_MTD_XIP is not set
 
 #
 # Mapping drivers for chip access
@@ -226,6 +239,7 @@ CONFIG_MTD_BAST_MAXSIZE=4
 # CONFIG_MTD_PHRAM is not set
 # CONFIG_MTD_MTDRAM is not set
 # CONFIG_MTD_BLKMTD is not set
+# CONFIG_MTD_BLOCK2MTD is not set
 
 #
 # Disk-On-Chip Device Drivers
@@ -244,6 +258,7 @@ CONFIG_MTD_NAND_S3C2410=y
 # CONFIG_MTD_NAND_S3C2410_DEBUG is not set
 # CONFIG_MTD_NAND_S3C2410_HWECC is not set
 # CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
 
 #
 # Plug and Play support
@@ -254,10 +269,12 @@ CONFIG_MTD_NAND_S3C2410=y
 #
 # CONFIG_BLK_DEV_FD is not set
 # CONFIG_PARIDE is not set
+# CONFIG_BLK_DEV_COW_COMMON is not set
 CONFIG_BLK_DEV_LOOP=y
 # CONFIG_BLK_DEV_CRYPTOLOOP is not set
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=16
 CONFIG_BLK_DEV_RAM_SIZE=4096
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE=""
@@ -270,6 +287,7 @@ CONFIG_IOSCHED_NOOP=y
 CONFIG_IOSCHED_AS=y
 CONFIG_IOSCHED_DEADLINE=y
 CONFIG_IOSCHED_CFQ=y
+CONFIG_ATA_OVER_ETH=m
 
 #
 # Multi-device support (RAID and LVM)
@@ -456,6 +474,7 @@ CONFIG_SERIO=y
 CONFIG_SERIO_SERPORT=y
 # CONFIG_SERIO_CT82C710 is not set
 # CONFIG_SERIO_PARKBD is not set
+CONFIG_SERIO_LIBPS2=y
 # CONFIG_SERIO_RAW is not set
 
 #
@@ -489,6 +508,7 @@ CONFIG_SERIAL_NONSTANDARD=y
 # CONFIG_DIGI is not set
 # CONFIG_MOXA_INTELLIO is not set
 # CONFIG_MOXA_SMARTIO is not set
+# CONFIG_ISI is not set
 # CONFIG_SYNCLINKMP is not set
 # CONFIG_N_HDLC is not set
 # CONFIG_RISCOM8 is not set
@@ -583,6 +603,7 @@ CONFIG_I2C_S3C2410=y
 CONFIG_I2C_SENSOR=m
 # CONFIG_SENSORS_ADM1021 is not set
 # CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
 # CONFIG_SENSORS_ADM1031 is not set
 # CONFIG_SENSORS_ASB100 is not set
 # CONFIG_SENSORS_DS1621 is not set
@@ -600,6 +621,7 @@ CONFIG_SENSORS_LM85=m
 # CONFIG_SENSORS_LM90 is not set
 # CONFIG_SENSORS_MAX1619 is not set
 # CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_SMSC47M1 is not set
 # CONFIG_SENSORS_W83781D is not set
 # CONFIG_SENSORS_W83L785TS is not set
@@ -693,6 +715,7 @@ CONFIG_JFFS_FS_VERBOSE=0
 CONFIG_JFFS2_FS=y
 CONFIG_JFFS2_FS_DEBUG=0
 # CONFIG_JFFS2_FS_NAND is not set
+# CONFIG_JFFS2_FS_NOR_ECC is not set
 # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
 CONFIG_JFFS2_ZLIB=y
 CONFIG_JFFS2_RTIME=y
@@ -812,6 +835,7 @@ CONFIG_DUMMY_CONSOLE=y
 # Logo configuration
 #
 # CONFIG_LOGO is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
 
 #
 # Sound
@@ -830,6 +854,10 @@ CONFIG_USB_ARCH_HAS_HCD=y
 # CONFIG_USB_ARCH_HAS_OHCI is not set
 
 #
+# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information
+#
+
+#
 # USB Gadget Support
 #
 # CONFIG_USB_GADGET is not set
@@ -848,8 +876,9 @@ CONFIG_DEBUG_KERNEL=y
 # CONFIG_DEBUG_SLAB is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
+CONFIG_DEBUG_BUGVERBOSE=y
 CONFIG_DEBUG_INFO=y
+# CONFIG_DEBUG_FS is not set
 CONFIG_FRAME_POINTER=y
 CONFIG_DEBUG_USER=y
 # CONFIG_DEBUG_WAITQ is not set
@@ -871,6 +900,10 @@ CONFIG_DEBUG_S3C2410_UART=0
 # CONFIG_CRYPTO is not set
 
 #
+# Hardware crypto devices
+#
+
+#
 # Library routines
 #
 # CONFIG_CRC_CCITT is not set