Merge tag 'mtd/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux

Pull MTD updates from Richard Weinberger:
 "NAND core changes:
   - Drop useless 'depends on' in Kconfig
   - Add an extra level in the Kconfig hierarchy
   - Trivial spellings
   - Dynamic allocation of the interface configurations
   - Dropping the default ONFI timing mode
   - Various cleanup (types, structures, naming, comments)
   - Hide the chip->data_interface indirection
   - Add the generic rb-gpios property
   - Add the ->choose_interface_config() hook
   - Introduce nand_choose_best_sdr_timings()
   - Use default values for tPROG_max and tBERS_max
   - Avoid redefining tR_max and tCCS_min
   - Add a helper to find the closest ONFI mode
   - bcm63xx MTD parsers: simplify CFE detection

  Raw NAND controller drivers changes:
   - fsl-upm: Deprecation of specific DT properties
   - fsl_upm: Driver rework and cleanup in favor of ->exec_op()
   - Ingenic: Cleanup ARRAY_SIZE() vs sizeof() use
   - brcmnand: ECC error handling on EDU transfers
   - brcmnand: Don't default to EDU transfers
   - qcom: Set BAM mode only if not set already
   - qcom: Avoid write to unavailable register
   - gpio: Driver rework in favor of ->exec_op()
   - tango: ->exec_op() conversion
   - mtk: ->exec_op() conversion

  Raw NAND chip drivers changes:
   - toshiba: Implement ->choose_interface_config() for TH58NVG2S3HBAI4
   - toshiba: Implement ->choose_interface_config() for TC58NVG0S3E
   - toshiba: Implement ->choose_interface_config() for TC58TEG5DCLTA00
   - hynix: Implement ->choose_interface_config() for H27UCG8T2ATR-BC

  HyperBus changes:
   - DMA support for TI's AM654 HyperBus controller driver.
   - HyperBus frontend driver for Renesas RPC-IF driver.

  SPI NOR core changes:
   - Support for Winbond w25q64jwm flash
   - Enable 4K sector support for mx25l12805d

  SPI NOR controller drivers changes:
   - intel-spi Add Alder Lake-S PCI ID

  MTD Core changes:
   - mtdoops: Don't run panic write twice
   - mtdconcat: Correctly handle panic write
   - Use DEFINE_SHOW_ATTRIBUTE"

* tag 'mtd/for-5.10' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (76 commits)
  mtd: hyperbus: Fix build failure when only RPCIF_HYPERBUS is enabled
  mtd: hyperbus: add Renesas RPC-IF driver
  Revert "mtd: spi-nor: Prefer asynchronous probe"
  mtd: parsers: bcm63xx: Do not make it modular
  mtd: spear_smi: Enable compile testing
  mtd: maps: vmu-flash: fix typos for struct memcard
  mtd: physmap: Add Baikal-T1 physically mapped ROM support
  mtd: maps: vmu-flash: simplify the return expression of probe_maple_vmu
  mtd: onenand: simplify the return expression of onenand_transfer_auto_oob
  mtd: rawnand: cadence: remove a redundant dev_err call
  mtd: rawnand: ams-delta: Fix non-OF build warning
  mtd: rawnand: Don't overwrite the error code from nand_set_ecc_soft_ops()
  mtd: rawnand: Introduce nand_set_ecc_on_host_ops()
  mtd: rawnand: atmel: Check return values for nand_read_data_op
  mtd: rawnand: vf610: Remove unused function vf610_nfc_transfer_size()
  mtd: rawnand: qcom: Simplify with dev_err_probe()
  mtd: rawnand: marvell: Fix and update kerneldoc
  mtd: rawnand: marvell: Simplify with dev_err_probe()
  mtd: rawnand: gpmi: Simplify with dev_err_probe()
  mtd: rawnand: atmel: Simplify with dev_err_probe()
  ...

121 files changed, 2316 insertions, 1076 deletions

diff --git a/Documentation/devicetree/bindings/mtd/nand-controller.yaml b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
index 274bbe6a365e..b29050fd7470 100644
--- a/Documentation/devicetree/bindings/mtd/nand-controller.yaml
+++ b/Documentation/devicetree/bindings/mtd/nand-controller.yaml
@@ -55,6 +55,37 @@ patternProperties:
         $ref: /schemas/types.yaml#/definitions/string
         enum: [none, soft, hw, hw_syndrome, hw_oob_first, on-die]
 
+      nand-ecc-engine:
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/phandle
+        description: |
+          A phandle on the hardware ECC engine if any. There are
+          basically three possibilities:
+          1/ The ECC engine is part of the NAND controller, in this
+          case the phandle should reference the parent node.
+          2/ The ECC engine is part of the NAND part (on-die), in this
+          case the phandle should reference the node itself.
+          3/ The ECC engine is external, in this case the phandle should
+          reference the specific ECC engine node.
+
+      nand-use-soft-ecc-engine:
+        type: boolean
+        description: Use a software ECC engine.
+
+      nand-no-ecc-engine:
+        type: boolean
+        description: Do not use any ECC correction.
+
+      nand-ecc-placement:
+        allOf:
+          - $ref: /schemas/types.yaml#/definitions/string
+          - enum: [ oob, interleaved ]
+        description:
+          Location of the ECC bytes. This location is unknown by default
+          but can be explicitly set to "oob", if all ECC bytes are
+          known to be stored in the OOB area, or "interleaved" if ECC
+          bytes will be interleaved with regular data in the main area.
+
       nand-ecc-algo:
         description:
           Desired ECC algorithm.
diff --git a/arch/arm/mach-davinci/board-da830-evm.c b/arch/arm/mach-davinci/board-da830-evm.c
index 1076886938b6..a20ba12d876c 100644
--- a/arch/arm/mach-davinci/board-da830-evm.c
+++ b/arch/arm/mach-davinci/board-da830-evm.c
@@ -306,7 +306,7 @@ static struct davinci_nand_pdata da830_evm_nand_pdata = {
 	.core_chipsel	= 1,
 	.parts		= da830_evm_nand_partitions,
 	.nr_parts	= ARRAY_SIZE(da830_evm_nand_partitions),
-	.ecc_mode	= NAND_ECC_HW,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
 	.ecc_bits	= 4,
 	.bbt_options	= NAND_BBT_USE_FLASH,
 	.bbt_td		= &da830_evm_nand_bbt_main_descr,
diff --git a/arch/arm/mach-davinci/board-da850-evm.c b/arch/arm/mach-davinci/board-da850-evm.c
index 6751292e5f8f..428012687a80 100644
--- a/arch/arm/mach-davinci/board-da850-evm.c
+++ b/arch/arm/mach-davinci/board-da850-evm.c
@@ -239,7 +239,7 @@ static struct davinci_nand_pdata da850_evm_nandflash_data = {
 	.core_chipsel	= 1,
 	.parts		= da850_evm_nandflash_partition,
 	.nr_parts	= ARRAY_SIZE(da850_evm_nandflash_partition),
-	.ecc_mode	= NAND_ECC_HW,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
 	.ecc_bits	= 4,
 	.bbt_options	= NAND_BBT_USE_FLASH,
 	.timing		= &da850_evm_nandflash_timing,
diff --git a/arch/arm/mach-davinci/board-dm355-evm.c b/arch/arm/mach-davinci/board-dm355-evm.c
index 5113273fda69..3c5a9e3c128a 100644
--- a/arch/arm/mach-davinci/board-dm355-evm.c
+++ b/arch/arm/mach-davinci/board-dm355-evm.c
@@ -82,7 +82,7 @@ static struct davinci_nand_pdata davinci_nand_data = {
 	.mask_chipsel		= BIT(14),
 	.parts			= davinci_nand_partitions,
 	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
-	.ecc_mode		= NAND_ECC_HW,
+	.engine_type		= NAND_ECC_ENGINE_TYPE_ON_HOST,
 	.bbt_options		= NAND_BBT_USE_FLASH,
 	.ecc_bits		= 4,
 };
diff --git a/arch/arm/mach-davinci/board-dm355-leopard.c b/arch/arm/mach-davinci/board-dm355-leopard.c
index b9e9950dd300..e475b2113e70 100644
--- a/arch/arm/mach-davinci/board-dm355-leopard.c
+++ b/arch/arm/mach-davinci/board-dm355-leopard.c
@@ -76,7 +76,8 @@ static struct davinci_nand_pdata davinci_nand_data = {
 	.mask_chipsel		= BIT(14),
 	.parts			= davinci_nand_partitions,
 	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
-	.ecc_mode		= NAND_ECC_HW_SYNDROME,
+	.engine_type		= NAND_ECC_ENGINE_TYPE_ON_HOST,
+	.ecc_placement		= NAND_ECC_PLACEMENT_INTERLEAVED,
 	.ecc_bits		= 4,
 	.bbt_options		= NAND_BBT_USE_FLASH,
 };
diff --git a/arch/arm/mach-davinci/board-dm365-evm.c b/arch/arm/mach-davinci/board-dm365-evm.c
index 2328b15ac067..bdf31eb77620 100644
--- a/arch/arm/mach-davinci/board-dm365-evm.c
+++ b/arch/arm/mach-davinci/board-dm365-evm.c
@@ -146,7 +146,7 @@ static struct davinci_nand_pdata davinci_nand_data = {
 	.mask_chipsel		= BIT(14),
 	.parts			= davinci_nand_partitions,
 	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
-	.ecc_mode		= NAND_ECC_HW,
+	.engine_type		= NAND_ECC_ENGINE_TYPE_ON_HOST,
 	.bbt_options		= NAND_BBT_USE_FLASH,
 	.ecc_bits		= 4,
 };
diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index a5d3708fedf6..bcb3c4070945 100644
--- a/arch/arm/mach-davinci/board-dm644x-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -162,7 +162,7 @@ static struct davinci_nand_pdata davinci_evm_nandflash_data = {
 	.core_chipsel	= 0,
 	.parts		= davinci_evm_nandflash_partition,
 	.nr_parts	= ARRAY_SIZE(davinci_evm_nandflash_partition),
-	.ecc_mode	= NAND_ECC_HW,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
 	.ecc_bits	= 1,
 	.bbt_options	= NAND_BBT_USE_FLASH,
 	.timing		= &davinci_evm_nandflash_timing,
diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index dd7d60f4139a..8319a6067a68 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -91,7 +91,7 @@ static struct davinci_nand_pdata davinci_nand_data = {
 	.mask_ale 		= 0x40000,
 	.parts			= davinci_nand_partitions,
 	.nr_parts		= ARRAY_SIZE(davinci_nand_partitions),
-	.ecc_mode		= NAND_ECC_HW,
+	.engine_type		= NAND_ECC_ENGINE_TYPE_ON_HOST,
 	.ecc_bits		= 1,
 	.options		= 0,
 };
diff --git a/arch/arm/mach-davinci/board-mityomapl138.c b/arch/arm/mach-davinci/board-mityomapl138.c
index 3382b93d9a2a..5205008c8061 100644
--- a/arch/arm/mach-davinci/board-mityomapl138.c
+++ b/arch/arm/mach-davinci/board-mityomapl138.c
@@ -432,7 +432,7 @@ static struct davinci_nand_pdata mityomapl138_nandflash_data = {
 	.core_chipsel	= 1,
 	.parts		= mityomapl138_nandflash_partition,
 	.nr_parts	= ARRAY_SIZE(mityomapl138_nandflash_partition),
-	.ecc_mode	= NAND_ECC_HW,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
 	.bbt_options	= NAND_BBT_USE_FLASH,
 	.options	= NAND_BUSWIDTH_16,
 	.ecc_bits	= 1, /* 4 bit mode is not supported with 16 bit NAND */
diff --git a/arch/arm/mach-davinci/board-neuros-osd2.c b/arch/arm/mach-davinci/board-neuros-osd2.c
index 6cf46bbc7e1d..b4843f68bb57 100644
--- a/arch/arm/mach-davinci/board-neuros-osd2.c
+++ b/arch/arm/mach-davinci/board-neuros-osd2.c
@@ -90,7 +90,7 @@ static struct davinci_nand_pdata davinci_ntosd2_nandflash_data = {
 	.core_chipsel	= 0,
 	.parts		= davinci_ntosd2_nandflash_partition,
 	.nr_parts	= ARRAY_SIZE(davinci_ntosd2_nandflash_partition),
-	.ecc_mode	= NAND_ECC_HW,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
 	.ecc_bits	= 1,
 	.bbt_options	= NAND_BBT_USE_FLASH,
 };
diff --git a/arch/arm/mach-davinci/board-omapl138-hawk.c b/arch/arm/mach-davinci/board-omapl138-hawk.c
index 6c79039002c9..88df8011a4e6 100644
--- a/arch/arm/mach-davinci/board-omapl138-hawk.c
+++ b/arch/arm/mach-davinci/board-omapl138-hawk.c
@@ -206,7 +206,7 @@ static struct davinci_nand_pdata omapl138_hawk_nandflash_data = {
 	.core_chipsel	= 1,
 	.parts		= omapl138_hawk_nandflash_partition,
 	.nr_parts	= ARRAY_SIZE(omapl138_hawk_nandflash_partition),
-	.ecc_mode	= NAND_ECC_HW,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
 	.ecc_bits	= 4,
 	.bbt_options	= NAND_BBT_USE_FLASH,
 	.options	= NAND_BUSWIDTH_16,
diff --git a/arch/arm/mach-s3c24xx/common-smdk.c b/arch/arm/mach-s3c24xx/common-smdk.c
index 75064dfaceb1..121646ad1bb1 100644
--- a/arch/arm/mach-s3c24xx/common-smdk.c
+++ b/arch/arm/mach-s3c24xx/common-smdk.c
@@ -191,7 +191,7 @@ static struct s3c2410_platform_nand smdk_nand_info = {
 	.twrph1		= 20,
 	.nr_sets	= ARRAY_SIZE(smdk_nand_sets),
 	.sets		= smdk_nand_sets,
-	.ecc_mode       = NAND_ECC_SOFT,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 /* devices we initialise */
diff --git a/arch/arm/mach-s3c24xx/mach-anubis.c b/arch/arm/mach-s3c24xx/mach-anubis.c
index 072966dcad78..28326241e360 100644
--- a/arch/arm/mach-s3c24xx/mach-anubis.c
+++ b/arch/arm/mach-s3c24xx/mach-anubis.c
@@ -218,7 +218,7 @@ static struct s3c2410_platform_nand __initdata anubis_nand_info = {
 	.nr_sets	= ARRAY_SIZE(anubis_nand_sets),
 	.sets		= anubis_nand_sets,
 	.select_chip	= anubis_nand_select,
-	.ecc_mode       = NAND_ECC_SOFT,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 /* IDE channels */
diff --git a/arch/arm/mach-s3c24xx/mach-at2440evb.c b/arch/arm/mach-s3c24xx/mach-at2440evb.c
index 58c5ef3cf1d7..04dedebdb57c 100644
--- a/arch/arm/mach-s3c24xx/mach-at2440evb.c
+++ b/arch/arm/mach-s3c24xx/mach-at2440evb.c
@@ -109,7 +109,7 @@ static struct s3c2410_platform_nand __initdata at2440evb_nand_info = {
 	.twrph1		= 40,
 	.nr_sets	= ARRAY_SIZE(at2440evb_nand_sets),
 	.sets		= at2440evb_nand_sets,
-	.ecc_mode       = NAND_ECC_SOFT,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 /* DM9000AEP 10/100 ethernet controller */
diff --git a/arch/arm/mach-s3c24xx/mach-bast.c b/arch/arm/mach-s3c24xx/mach-bast.c
index a7c3955ae8f6..6465eab0ab3a 100644
--- a/arch/arm/mach-s3c24xx/mach-bast.c
+++ b/arch/arm/mach-s3c24xx/mach-bast.c
@@ -294,7 +294,7 @@ static struct s3c2410_platform_nand __initdata bast_nand_info = {
 	.nr_sets	= ARRAY_SIZE(bast_nand_sets),
 	.sets		= bast_nand_sets,
 	.select_chip	= bast_nand_select,
-	.ecc_mode       = NAND_ECC_SOFT,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 /* DM9000 */
diff --git a/arch/arm/mach-s3c24xx/mach-gta02.c b/arch/arm/mach-s3c24xx/mach-gta02.c
index 526fd0933289..732748170751 100644
--- a/arch/arm/mach-s3c24xx/mach-gta02.c
+++ b/arch/arm/mach-s3c24xx/mach-gta02.c
@@ -417,7 +417,7 @@ static struct s3c2410_platform_nand __initdata gta02_nand_info = {
 	.twrph1		= 15,
 	.nr_sets	= ARRAY_SIZE(gta02_nand_sets),
 	.sets		= gta02_nand_sets,
-	.ecc_mode       = NAND_ECC_SOFT,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 
diff --git a/arch/arm/mach-s3c24xx/mach-jive.c b/arch/arm/mach-s3c24xx/mach-jive.c
index 885e8f12e4b9..8233dcff19e7 100644
--- a/arch/arm/mach-s3c24xx/mach-jive.c
+++ b/arch/arm/mach-s3c24xx/mach-jive.c
@@ -228,7 +228,7 @@ static struct s3c2410_platform_nand __initdata jive_nand_info = {
 	.twrph1		= 40,
 	.sets		= jive_nand_sets,
 	.nr_sets	= ARRAY_SIZE(jive_nand_sets),
-	.ecc_mode       = NAND_ECC_SOFT,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 static int __init jive_mtdset(char *options)
diff --git a/arch/arm/mach-s3c24xx/mach-mini2440.c b/arch/arm/mach-s3c24xx/mach-mini2440.c
index 235749448311..057dcbaf1b22 100644
--- a/arch/arm/mach-s3c24xx/mach-mini2440.c
+++ b/arch/arm/mach-s3c24xx/mach-mini2440.c
@@ -296,7 +296,7 @@ static struct s3c2410_platform_nand mini2440_nand_info __initdata = {
 	.nr_sets	= ARRAY_SIZE(mini2440_nand_sets),
 	.sets		= mini2440_nand_sets,
 	.ignore_unset_ecc = 1,
-	.ecc_mode	= NAND_ECC_HW,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST,
 };
 
 /* DM9000AEP 10/100 ethernet controller */
diff --git a/arch/arm/mach-s3c24xx/mach-osiris.c b/arch/arm/mach-s3c24xx/mach-osiris.c
index ee3630cb236a..157448827f61 100644
--- a/arch/arm/mach-s3c24xx/mach-osiris.c
+++ b/arch/arm/mach-s3c24xx/mach-osiris.c
@@ -234,7 +234,7 @@ static struct s3c2410_platform_nand __initdata osiris_nand_info = {
 	.nr_sets	= ARRAY_SIZE(osiris_nand_sets),
 	.sets		= osiris_nand_sets,
 	.select_chip	= osiris_nand_select,
-	.ecc_mode       = NAND_ECC_SOFT,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 /* PCMCIA control and configuration */
diff --git a/arch/arm/mach-s3c24xx/mach-qt2410.c b/arch/arm/mach-s3c24xx/mach-qt2410.c
index ff9e3197309b..f3131d94e90b 100644
--- a/arch/arm/mach-s3c24xx/mach-qt2410.c
+++ b/arch/arm/mach-s3c24xx/mach-qt2410.c
@@ -287,7 +287,7 @@ static struct s3c2410_platform_nand __initdata qt2410_nand_info = {
 	.twrph1		= 20,
 	.nr_sets	= ARRAY_SIZE(qt2410_nand_sets),
 	.sets		= qt2410_nand_sets,
-	.ecc_mode       = NAND_ECC_SOFT,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 /* UDC */
diff --git a/arch/arm/mach-s3c24xx/mach-rx1950.c b/arch/arm/mach-s3c24xx/mach-rx1950.c
index e9806bf654b4..3645b9c838d9 100644
--- a/arch/arm/mach-s3c24xx/mach-rx1950.c
+++ b/arch/arm/mach-s3c24xx/mach-rx1950.c
@@ -620,7 +620,7 @@ static struct s3c2410_platform_nand rx1950_nand_info = {
 	.twrph1 = 15,
 	.nr_sets = ARRAY_SIZE(rx1950_nand_sets),
 	.sets = rx1950_nand_sets,
-	.ecc_mode = NAND_ECC_SOFT,
+	.engine_type = NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 static struct s3c2410_udc_mach_info rx1950_udc_cfg __initdata = {
diff --git a/arch/arm/mach-s3c24xx/mach-rx3715.c b/arch/arm/mach-s3c24xx/mach-rx3715.c
index 995f1ff34a1b..017010d67e01 100644
--- a/arch/arm/mach-s3c24xx/mach-rx3715.c
+++ b/arch/arm/mach-s3c24xx/mach-rx3715.c
@@ -158,7 +158,7 @@ static struct s3c2410_platform_nand __initdata rx3715_nand_info = {
 	.twrph1		= 15,
 	.nr_sets	= ARRAY_SIZE(rx3715_nand_sets),
 	.sets		= rx3715_nand_sets,
-	.ecc_mode       = NAND_ECC_SOFT,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 static struct platform_device *rx3715_devices[] __initdata = {
diff --git a/arch/arm/mach-s3c24xx/mach-vstms.c b/arch/arm/mach-s3c24xx/mach-vstms.c
index d76b28b65e65..c5fa215a527e 100644
--- a/arch/arm/mach-s3c24xx/mach-vstms.c
+++ b/arch/arm/mach-s3c24xx/mach-vstms.c
@@ -112,7 +112,7 @@ static struct s3c2410_platform_nand __initdata vstms_nand_info = {
 	.twrph1		= 20,
 	.nr_sets	= ARRAY_SIZE(vstms_nand_sets),
 	.sets		= vstms_nand_sets,
-	.ecc_mode       = NAND_ECC_SOFT,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 static struct platform_device *vstms_devices[] __initdata = {
diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c
index e7080215c624..0d9acaf91701 100644
--- a/arch/arm/mach-s3c64xx/mach-hmt.c
+++ b/arch/arm/mach-s3c64xx/mach-hmt.c
@@ -199,7 +199,7 @@ static struct s3c2410_platform_nand hmt_nand_info = {
 	.twrph1		= 40,
 	.nr_sets	= ARRAY_SIZE(hmt_nand_sets),
 	.sets		= hmt_nand_sets,
-	.ecc_mode       = NAND_ECC_SOFT,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 static struct gpio_led hmt_leds[] = {
diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c
index 0dd36ae49e6a..6fbb57878746 100644
--- a/arch/arm/mach-s3c64xx/mach-mini6410.c
+++ b/arch/arm/mach-s3c64xx/mach-mini6410.c
@@ -136,7 +136,7 @@ static struct s3c2410_platform_nand mini6410_nand_info = {
 	.twrph1		= 40,
 	.nr_sets	= ARRAY_SIZE(mini6410_nand_sets),
 	.sets		= mini6410_nand_sets,
-	.ecc_mode       = NAND_ECC_SOFT,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 static struct s3c_fb_pd_win mini6410_lcd_type0_fb_win = {
diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c
index 0ff88b6859c4..1e98e530a6aa 100644
--- a/arch/arm/mach-s3c64xx/mach-real6410.c
+++ b/arch/arm/mach-s3c64xx/mach-real6410.c
@@ -188,7 +188,7 @@ static struct s3c2410_platform_nand real6410_nand_info = {
 	.twrph1		= 40,
 	.nr_sets	= ARRAY_SIZE(real6410_nand_sets),
 	.sets		= real6410_nand_sets,
-	.ecc_mode       = NAND_ECC_SOFT,
+	.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT,
 };
 
 static struct platform_device *real6410_devices[] __initdata = {
diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig
index f96287c4b789..0f4c2d823de8 100644
--- a/drivers/mtd/devices/Kconfig
+++ b/drivers/mtd/devices/Kconfig
@@ -91,7 +91,7 @@ config MTD_MCHP23K256
 
 config MTD_SPEAR_SMI
 	tristate "SPEAR MTD NOR Support through SMI controller"
-	depends on PLAT_SPEAR
+	depends on PLAT_SPEAR || COMPILE_TEST
 	default y
 	help
 	  This enable SNOR support on SPEAR platforms using SMI controller
diff --git a/drivers/mtd/devices/lart.c b/drivers/mtd/devices/lart.c
index 56f50d27b7fd..aecd441e4183 100644
--- a/drivers/mtd/devices/lart.c
+++ b/drivers/mtd/devices/lart.c
@@ -436,7 +436,10 @@ static int flash_read (struct mtd_info *mtd,loff_t from,size_t len,size_t *retle
 	 {
 		int gap = BUSWIDTH - (from & (BUSWIDTH - 1));
 
-		while (len && gap--) *buf++ = read8 (from++), len--;
+		while (len && gap--) {
+			*buf++ = read8 (from++);
+			len--;
+		}
 	 }
 
    /* now we read dwords until we reach a non-dword boundary */
@@ -518,7 +521,10 @@ static int flash_write (struct mtd_info *mtd,loff_t to,size_t len,size_t *retlen
 		i = n = 0;
 
 		while (gap--) tmp[i++] = 0xFF;
-		while (len && i < BUSWIDTH) tmp[i++] = buf[n++], len--;
+		while (len && i < BUSWIDTH) {
+			tmp[i++] = buf[n++];
+			len--;
+		}
 		while (i < BUSWIDTH) tmp[i++] = 0xFF;
 
 		if (!write_dword (aligned,*((__u32 *) tmp))) return (-EIO);
diff --git a/drivers/mtd/devices/spear_smi.c b/drivers/mtd/devices/spear_smi.c
index 79dcca16481d..2e00862389dd 100644
--- a/drivers/mtd/devices/spear_smi.c
+++ b/drivers/mtd/devices/spear_smi.c
@@ -793,7 +793,7 @@ static int spear_smi_probe_config_dt(struct platform_device *pdev,
 				     struct device_node *np)
 {
 	struct spear_smi_plat_data *pdata = dev_get_platdata(&pdev->dev);
-	struct device_node *pp = NULL;
+	struct device_node *pp;
 	const __be32 *addr;
 	u32 val;
 	int len;
@@ -812,7 +812,7 @@ static int spear_smi_probe_config_dt(struct platform_device *pdev,
 		return -ENOMEM;
 
 	/* Fill structs for each subnode (flash device) */
-	while ((pp = of_get_next_child(np, pp))) {
+	for_each_child_of_node(np, pp) {
 		pdata->np[i] = pp;
 
 		/* Read base-addr and size from DT */
diff --git a/drivers/mtd/hyperbus/Kconfig b/drivers/mtd/hyperbus/Kconfig
index a4d8968d133d..46c7e407e378 100644
--- a/drivers/mtd/hyperbus/Kconfig
+++ b/drivers/mtd/hyperbus/Kconfig
@@ -22,4 +22,11 @@ config HBMC_AM654
 	 This is the driver for HyperBus controller on TI's AM65x and
 	 other SoCs
 
+config RPCIF_HYPERBUS
+	tristate "Renesas RPC-IF HyperBus driver"
+	depends on RENESAS_RPCIF
+	depends on MTD_CFI_BE_BYTE_SWAP
+	help
+	  This option includes Renesas RPC-IF HyperBus support.
+
 endif # MTD_HYPERBUS
diff --git a/drivers/mtd/hyperbus/Makefile b/drivers/mtd/hyperbus/Makefile
index 8a936e066f48..5fc2b5124542 100644
--- a/drivers/mtd/hyperbus/Makefile
+++ b/drivers/mtd/hyperbus/Makefile
@@ -2,3 +2,4 @@
 
 obj-$(CONFIG_MTD_HYPERBUS)	+= hyperbus-core.o
 obj-$(CONFIG_HBMC_AM654)	+= hbmc-am654.o
+obj-$(CONFIG_RPCIF_HYPERBUS)	+= rpc-if.o
diff --git a/drivers/mtd/hyperbus/hbmc-am654.c b/drivers/mtd/hyperbus/hbmc-am654.c
index e0e33f6bf513..a3439b791eeb 100644
--- a/drivers/mtd/hyperbus/hbmc-am654.c
+++ b/drivers/mtd/hyperbus/hbmc-am654.c
@@ -3,6 +3,10 @@
 // Copyright (C) 2019 Texas Instruments Incorporated - https://www.ti.com/
 // Author: Vignesh Raghavendra <vigneshr@ti.com>
 
+#include <linux/completion.h>
+#include <linux/dma-direction.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmaengine.h>
 #include <linux/err.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
@@ -13,11 +17,18 @@
 #include <linux/of.h>
 #include <linux/of_address.h>
 #include <linux/platform_device.h>
-#include <linux/pm_runtime.h>
+#include <linux/sched/task_stack.h>
 #include <linux/types.h>
 
 #define AM654_HBMC_CALIB_COUNT 25
 
+struct am654_hbmc_device_priv {
+	struct completion rx_dma_complete;
+	phys_addr_t device_base;
+	struct hyperbus_ctlr *ctlr;
+	struct dma_chan *rx_chan;
+};
+
 struct am654_hbmc_priv {
 	struct hyperbus_ctlr ctlr;
 	struct hyperbus_device hbdev;
@@ -52,13 +63,103 @@ static int am654_hbmc_calibrate(struct hyperbus_device *hbdev)
 	return ret;
 }
 
+static void am654_hbmc_dma_callback(void *param)
+{
+	struct am654_hbmc_device_priv *priv = param;
+
+	complete(&priv->rx_dma_complete);
+}
+
+static int am654_hbmc_dma_read(struct am654_hbmc_device_priv *priv, void *to,
+			       unsigned long from, ssize_t len)
+
+{
+	enum dma_ctrl_flags flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT;
+	struct dma_chan *rx_chan = priv->rx_chan;
+	struct dma_async_tx_descriptor *tx;
+	dma_addr_t dma_dst, dma_src;
+	dma_cookie_t cookie;
+	int ret;
+
+	if (!priv->rx_chan || !virt_addr_valid(to) || object_is_on_stack(to))
+		return -EINVAL;
+
+	dma_dst = dma_map_single(rx_chan->device->dev, to, len, DMA_FROM_DEVICE);
+	if (dma_mapping_error(rx_chan->device->dev, dma_dst)) {
+		dev_dbg(priv->ctlr->dev, "DMA mapping failed\n");
+		return -EIO;
+	}
+
+	dma_src = priv->device_base + from;
+	tx = dmaengine_prep_dma_memcpy(rx_chan, dma_dst, dma_src, len, flags);
+	if (!tx) {
+		dev_err(priv->ctlr->dev, "device_prep_dma_memcpy error\n");
+		ret = -EIO;
+		goto unmap_dma;
+	}
+
+	reinit_completion(&priv->rx_dma_complete);
+	tx->callback = am654_hbmc_dma_callback;
+	tx->callback_param = priv;
+	cookie = dmaengine_submit(tx);
+
+	ret = dma_submit_error(cookie);
+	if (ret) {
+		dev_err(priv->ctlr->dev, "dma_submit_error %d\n", cookie);
+		goto unmap_dma;
+	}
+
+	dma_async_issue_pending(rx_chan);
+	if (!wait_for_completion_timeout(&priv->rx_dma_complete,  msecs_to_jiffies(len + 1000))) {
+		dmaengine_terminate_sync(rx_chan);
+		dev_err(priv->ctlr->dev, "DMA wait_for_completion_timeout\n");
+		ret = -ETIMEDOUT;
+	}
+
+unmap_dma:
+	dma_unmap_single(rx_chan->device->dev, dma_dst, len, DMA_FROM_DEVICE);
+	return ret;
+}
+
+static void am654_hbmc_read(struct hyperbus_device *hbdev, void *to,
+			    unsigned long from, ssize_t len)
+{
+	struct am654_hbmc_device_priv *priv = hbdev->priv;
+
+	if (len < SZ_1K || am654_hbmc_dma_read(priv, to, from, len))
+		memcpy_fromio(to, hbdev->map.virt + from, len);
+}
+
 static const struct hyperbus_ops am654_hbmc_ops = {
 	.calibrate = am654_hbmc_calibrate,
+	.copy_from = am654_hbmc_read,
 };
 
+static int am654_hbmc_request_mmap_dma(struct am654_hbmc_device_priv *priv)
+{
+	struct dma_chan *rx_chan;
+	dma_cap_mask_t mask;
+
+	dma_cap_zero(mask);
+	dma_cap_set(DMA_MEMCPY, mask);
+
+	rx_chan = dma_request_chan_by_mask(&mask);
+	if (IS_ERR(rx_chan)) {
+		if (PTR_ERR(rx_chan) == -EPROBE_DEFER)
+			return -EPROBE_DEFER;
+		dev_dbg(priv->ctlr->dev, "No DMA channel available\n");
+		return 0;
+	}
+	priv->rx_chan = rx_chan;
+	init_completion(&priv->rx_dma_complete);
+
+	return 0;
+}
+
 static int am654_hbmc_probe(struct platform_device *pdev)
 {
 	struct device_node *np = pdev->dev.of_node;
+	struct am654_hbmc_device_priv *dev_priv;
 	struct device *dev = &pdev->dev;
 	struct am654_hbmc_priv *priv;
 	struct resource res;
@@ -70,7 +171,8 @@ static int am654_hbmc_probe(struct platform_device *pdev)
 
 	platform_set_drvdata(pdev, priv);
 
-	ret = of_address_to_resource(np, 0, &res);
+	priv->hbdev.np = of_get_next_child(np, NULL);
+	ret = of_address_to_resource(priv->hbdev.np, 0, &res);
 	if (ret)
 		return ret;
 
@@ -88,13 +190,6 @@ static int am654_hbmc_probe(struct platform_device *pdev)
 		priv->mux_ctrl = control;
 	}
 
-	pm_runtime_enable(dev);
-	ret = pm_runtime_get_sync(dev);
-	if (ret < 0) {
-		pm_runtime_put_noidle(dev);
-		goto disable_pm;
-	}
-
 	priv->hbdev.map.size = resource_size(&res);
 	priv->hbdev.map.virt = devm_ioremap_resource(dev, &res);
 	if (IS_ERR(priv->hbdev.map.virt))
@@ -103,17 +198,32 @@ static int am654_hbmc_probe(struct platform_device *pdev)
 	priv->ctlr.dev = dev;
 	priv->ctlr.ops = &am654_hbmc_ops;
 	priv->hbdev.ctlr = &priv->ctlr;
-	priv->hbdev.np = of_get_next_child(dev->of_node, NULL);
+
+	dev_priv = devm_kzalloc(dev, sizeof(*dev_priv), GFP_KERNEL);
+	if (!dev_priv) {
+		ret = -ENOMEM;
+		goto disable_mux;
+	}
+
+	priv->hbdev.priv = dev_priv;
+	dev_priv->device_base = res.start;
+	dev_priv->ctlr = &priv->ctlr;
+
+	ret = am654_hbmc_request_mmap_dma(dev_priv);
+	if (ret)
+		goto disable_mux;
+
 	ret = hyperbus_register_device(&priv->hbdev);
 	if (ret) {
 		dev_err(dev, "failed to register controller\n");
-		pm_runtime_put_sync(&pdev->dev);
-		goto disable_pm;
+		goto release_dma;
 	}
 
 	return 0;
-disable_pm:
-	pm_runtime_disable(dev);
+release_dma:
+	if (dev_priv->rx_chan)
+		dma_release_channel(dev_priv->rx_chan);
+disable_mux:
 	if (priv->mux_ctrl)
 		mux_control_deselect(priv->mux_ctrl);
 	return ret;
@@ -122,13 +232,15 @@ disable_pm:
 static int am654_hbmc_remove(struct platform_device *pdev)
 {
 	struct am654_hbmc_priv *priv = platform_get_drvdata(pdev);
+	struct am654_hbmc_device_priv *dev_priv = priv->hbdev.priv;
 	int ret;
 
 	ret = hyperbus_unregister_device(&priv->hbdev);
 	if (priv->mux_ctrl)
 		mux_control_deselect(priv->mux_ctrl);
-	pm_runtime_put_sync(&pdev->dev);
-	pm_runtime_disable(&pdev->dev);
+
+	if (dev_priv->rx_chan)
+		dma_release_channel(dev_priv->rx_chan);
 
 	return ret;
 }
diff --git a/drivers/mtd/hyperbus/rpc-if.c b/drivers/mtd/hyperbus/rpc-if.c
new file mode 100644
index 000000000000..ecb050ba95cd
--- /dev/null
+++ b/drivers/mtd/hyperbus/rpc-if.c
@@ -0,0 +1,170 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Linux driver for RPC-IF HyperFlash
+ *
+ * Copyright (C) 2019-2020 Cogent Embedded, Inc.
+ */
+
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/mtd/hyperbus.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mux/consumer.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/types.h>
+
+#include <memory/renesas-rpc-if.h>
+
+struct	rpcif_hyperbus {
+	struct rpcif rpc;
+	struct hyperbus_ctlr ctlr;
+	struct hyperbus_device hbdev;
+};
+
+static const struct rpcif_op rpcif_op_tmpl = {
+	.cmd = {
+		.buswidth = 8,
+		.ddr = true,
+	},
+	.ocmd = {
+		.buswidth = 8,
+		.ddr = true,
+	},
+	.addr = {
+		.nbytes = 1,
+		.buswidth = 8,
+		.ddr = true,
+	},
+	.data = {
+		.buswidth = 8,
+		.ddr = true,
+	},
+};
+
+static void rpcif_hb_prepare_read(struct rpcif *rpc, void *to,
+				  unsigned long from, ssize_t len)
+{
+	struct rpcif_op op = rpcif_op_tmpl;
+
+	op.cmd.opcode = HYPERBUS_RW_READ | HYPERBUS_AS_MEM;
+	op.addr.val = from >> 1;
+	op.dummy.buswidth = 1;
+	op.dummy.ncycles = 15;
+	op.data.dir = RPCIF_DATA_IN;
+	op.data.nbytes = len;
+	op.data.buf.in = to;
+
+	rpcif_prepare(rpc, &op, NULL, NULL);
+}
+
+static void rpcif_hb_prepare_write(struct rpcif *rpc, unsigned long to,
+				   void *from, ssize_t len)
+{
+	struct rpcif_op op = rpcif_op_tmpl;
+
+	op.cmd.opcode = HYPERBUS_RW_WRITE | HYPERBUS_AS_MEM;
+	op.addr.val = to >> 1;
+	op.data.dir = RPCIF_DATA_OUT;
+	op.data.nbytes = len;
+	op.data.buf.out = from;
+
+	rpcif_prepare(rpc, &op, NULL, NULL);
+}
+
+static u16 rpcif_hb_read16(struct hyperbus_device *hbdev, unsigned long addr)
+{
+	struct rpcif_hyperbus *hyperbus =
+		container_of(hbdev, struct rpcif_hyperbus, hbdev);
+	map_word data;
+
+	rpcif_hb_prepare_read(&hyperbus->rpc, &data, addr, 2);
+
+	rpcif_manual_xfer(&hyperbus->rpc);
+
+	return data.x[0];
+}
+
+static void rpcif_hb_write16(struct hyperbus_device *hbdev, unsigned long addr,
+			     u16 data)
+{
+	struct rpcif_hyperbus *hyperbus =
+		container_of(hbdev, struct rpcif_hyperbus, hbdev);
+
+	rpcif_hb_prepare_write(&hyperbus->rpc, addr, &data, 2);
+
+	rpcif_manual_xfer(&hyperbus->rpc);
+}
+
+static void rpcif_hb_copy_from(struct hyperbus_device *hbdev, void *to,
+			       unsigned long from, ssize_t len)
+{
+	struct rpcif_hyperbus *hyperbus =
+		container_of(hbdev, struct rpcif_hyperbus, hbdev);
+
+	rpcif_hb_prepare_read(&hyperbus->rpc, to, from, len);
+
+	rpcif_dirmap_read(&hyperbus->rpc, from, len, to);
+}
+
+static const struct hyperbus_ops rpcif_hb_ops = {
+	.read16 = rpcif_hb_read16,
+	.write16 = rpcif_hb_write16,
+	.copy_from = rpcif_hb_copy_from,
+};
+
+static int rpcif_hb_probe(struct platform_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct rpcif_hyperbus *hyperbus;
+	int error;
+
+	hyperbus = devm_kzalloc(dev, sizeof(*hyperbus), GFP_KERNEL);
+	if (!hyperbus)
+		return -ENOMEM;
+
+	rpcif_sw_init(&hyperbus->rpc, pdev->dev.parent);
+
+	platform_set_drvdata(pdev, hyperbus);
+
+	rpcif_enable_rpm(&hyperbus->rpc);
+
+	rpcif_hw_init(&hyperbus->rpc, true);
+
+	hyperbus->hbdev.map.size = hyperbus->rpc.size;
+	hyperbus->hbdev.map.virt = hyperbus->rpc.dirmap;
+
+	hyperbus->ctlr.dev = dev;
+	hyperbus->ctlr.ops = &rpcif_hb_ops;
+	hyperbus->hbdev.ctlr = &hyperbus->ctlr;
+	hyperbus->hbdev.np = of_get_next_child(pdev->dev.parent->of_node, NULL);
+	error = hyperbus_register_device(&hyperbus->hbdev);
+	if (error)
+		rpcif_disable_rpm(&hyperbus->rpc);
+
+	return error;
+}
+
+static int rpcif_hb_remove(struct platform_device *pdev)
+{
+	struct rpcif_hyperbus *hyperbus = platform_get_drvdata(pdev);
+	int error = hyperbus_unregister_device(&hyperbus->hbdev);
+	struct rpcif *rpc = dev_get_drvdata(pdev->dev.parent);
+
+	rpcif_disable_rpm(rpc);
+	return error;
+}
+
+static struct platform_driver rpcif_platform_driver = {
+	.probe	= rpcif_hb_probe,
+	.remove	= rpcif_hb_remove,
+	.driver	= {
+		.name	= "rpc-if-hyperflash",
+	},
+};
+
+module_platform_driver(rpcif_platform_driver);
+
+MODULE_DESCRIPTION("Renesas RPC-IF HyperFlash driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/mtd/lpddr/lpddr2_nvm.c b/drivers/mtd/lpddr/lpddr2_nvm.c
index 0f1547f09d08..72f5c7b30079 100644
--- a/drivers/mtd/lpddr/lpddr2_nvm.c
+++ b/drivers/mtd/lpddr/lpddr2_nvm.c
@@ -393,6 +393,17 @@ static int lpddr2_nvm_lock(struct mtd_info *mtd, loff_t start_add,
 	return lpddr2_nvm_do_block_op(mtd, start_add, len, LPDDR2_NVM_LOCK);
 }
 
+static const struct mtd_info lpddr2_nvm_mtd_info = {
+	.type		= MTD_RAM,
+	.writesize	= 1,
+	.flags		= (MTD_CAP_NVRAM | MTD_POWERUP_LOCK),
+	._read		= lpddr2_nvm_read,
+	._write		= lpddr2_nvm_write,
+	._erase		= lpddr2_nvm_erase,
+	._unlock	= lpddr2_nvm_unlock,
+	._lock		= lpddr2_nvm_lock,
+};
+
 /*
  * lpddr2_nvm driver probe method
  */
@@ -433,6 +444,7 @@ static int lpddr2_nvm_probe(struct platform_device *pdev)
 		.pfow_base	= OW_BASE_ADDRESS,
 		.fldrv_priv	= pcm_data,
 	};
+
 	if (IS_ERR(map->virt))
 		return PTR_ERR(map->virt);
 
@@ -444,22 +456,13 @@ static int lpddr2_nvm_probe(struct platform_device *pdev)
 		return PTR_ERR(pcm_data->ctl_regs);
 
 	/* Populate mtd_info data structure */
-	*mtd = (struct mtd_info) {
-		.dev		= { .parent = &pdev->dev },
-		.name		= pdev->dev.init_name,
-		.type		= MTD_RAM,
-		.priv		= map,
-		.size		= resource_size(add_range),
-		.erasesize	= ERASE_BLOCKSIZE * pcm_data->bus_width,
-		.writesize	= 1,
-		.writebufsize	= WRITE_BUFFSIZE * pcm_data->bus_width,
-		.flags		= (MTD_CAP_NVRAM | MTD_POWERUP_LOCK),
-		._read		= lpddr2_nvm_read,
-		._write		= lpddr2_nvm_write,
-		._erase		= lpddr2_nvm_erase,
-		._unlock	= lpddr2_nvm_unlock,
-		._lock		= lpddr2_nvm_lock,
-	};
+	*mtd = lpddr2_nvm_mtd_info;
+	mtd->dev.parent		= &pdev->dev;
+	mtd->name		= pdev->dev.init_name;
+	mtd->priv		= map;
+	mtd->size		= resource_size(add_range);
+	mtd->erasesize		= ERASE_BLOCKSIZE * pcm_data->bus_width;
+	mtd->writebufsize	= WRITE_BUFFSIZE * pcm_data->bus_width;
 
 	/* Verify the presence of the device looking for PFOW string */
 	if (!lpddr2_nvm_pfow_present(map)) {
diff --git a/drivers/mtd/lpddr/lpddr_cmds.c b/drivers/mtd/lpddr/lpddr_cmds.c
index fb1cbc9a2870..ee063baed136 100644
--- a/drivers/mtd/lpddr/lpddr_cmds.c
+++ b/drivers/mtd/lpddr/lpddr_cmds.c
@@ -94,6 +94,34 @@ struct mtd_info *lpddr_cmdset(struct map_info *map)
 }
 EXPORT_SYMBOL(lpddr_cmdset);
 
+static void print_drs_error(unsigned int dsr)
+{
+	int prog_status = (dsr & DSR_RPS) >> 8;
+
+	if (!(dsr & DSR_AVAILABLE))
+		pr_notice("DSR.15: (0) Device not Available\n");
+	if ((prog_status & 0x03) == 0x03)
+		pr_notice("DSR.9,8: (11) Attempt to program invalid half with 41h command\n");
+	else if (prog_status & 0x02)
+		pr_notice("DSR.9,8: (10) Object Mode Program attempt in region with Control Mode data\n");
+	else if (prog_status &  0x01)
+		pr_notice("DSR.9,8: (01) Program attempt in region with Object Mode data\n");
+	if (!(dsr & DSR_READY_STATUS))
+		pr_notice("DSR.7: (0) Device is Busy\n");
+	if (dsr & DSR_ESS)
+		pr_notice("DSR.6: (1) Erase Suspended\n");
+	if (dsr & DSR_ERASE_STATUS)
+		pr_notice("DSR.5: (1) Erase/Blank check error\n");
+	if (dsr & DSR_PROGRAM_STATUS)
+		pr_notice("DSR.4: (1) Program Error\n");
+	if (dsr & DSR_VPPS)
+		pr_notice("DSR.3: (1) Vpp low detect, operation aborted\n");
+	if (dsr & DSR_PSS)
+		pr_notice("DSR.2: (1) Program suspended\n");
+	if (dsr & DSR_DPS)
+		pr_notice("DSR.1: (1) Aborted Erase/Program attempt on locked block\n");
+}
+
 static int wait_for_ready(struct map_info *map, struct flchip *chip,
 		unsigned int chip_op_time)
 {
diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig
index fd37553f1b07..6650acbc961e 100644
--- a/drivers/mtd/maps/Kconfig
+++ b/drivers/mtd/maps/Kconfig
@@ -75,6 +75,17 @@ config MTD_PHYSMAP_OF
 	  physically into the CPU's memory. The mapping description here is
 	  taken from OF device tree.
 
+config MTD_PHYSMAP_BT1_ROM
+	bool "Baikal-T1 Boot ROMs OF-based physical memory map handling"
+	depends on MTD_PHYSMAP_OF
+	depends on MIPS_BAIKAL_T1 || COMPILE_TEST
+	select MTD_COMPLEX_MAPPINGS
+	select MULTIPLEXER
+	select MUX_MMIO
+	help
+	  This provides some extra DT physmap parsing for the Baikal-T1
+	  platforms, some detection and setting up ROMs-specific accessors.
+
 config MTD_PHYSMAP_VERSATILE
 	bool "ARM Versatile OF-based physical memory map handling"
 	depends on MTD_PHYSMAP_OF
diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile
index c0da86a5d26f..79f018cf412f 100644
--- a/drivers/mtd/maps/Makefile
+++ b/drivers/mtd/maps/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_MTD_CK804XROM)	+= ck804xrom.o
 obj-$(CONFIG_MTD_TSUNAMI)	+= tsunami_flash.o
 obj-$(CONFIG_MTD_PXA2XX)	+= pxa2xx-flash.o
 physmap-objs-y			+= physmap-core.o
+physmap-objs-$(CONFIG_MTD_PHYSMAP_BT1_ROM) += physmap-bt1-rom.o
 physmap-objs-$(CONFIG_MTD_PHYSMAP_VERSATILE) += physmap-versatile.o
 physmap-objs-$(CONFIG_MTD_PHYSMAP_GEMINI) += physmap-gemini.o
 physmap-objs-$(CONFIG_MTD_PHYSMAP_IXP4XX) += physmap-ixp4xx.o
diff --git a/drivers/mtd/maps/physmap-bt1-rom.c b/drivers/mtd/maps/physmap-bt1-rom.c
new file mode 100644
index 000000000000..27cfe1c63a2e
--- /dev/null
+++ b/drivers/mtd/maps/physmap-bt1-rom.c
@@ -0,0 +1,126 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
+ *
+ * Authors:
+ *   Serge Semin <Sergey.Semin@baikalelectronics.ru>
+ *
+ * Baikal-T1 Physically Mapped Internal ROM driver
+ */
+#include <linux/bits.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/xip.h>
+#include <linux/mux/consumer.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+#include <linux/platform_device.h>
+#include <linux/string.h>
+#include <linux/types.h>
+
+#include "physmap-bt1-rom.h"
+
+/*
+ * Baikal-T1 SoC ROMs are only accessible by the dword-aligned instructions.
+ * We have to take this into account when implementing the data read-methods.
+ * Note there is no need in bothering with endianness, since both Baikal-T1
+ * CPU and MMIO are LE.
+ */
+static map_word __xipram bt1_rom_map_read(struct map_info *map,
+					  unsigned long ofs)
+{
+	void __iomem *src = map->virt + ofs;
+	unsigned long shift;
+	map_word ret;
+	u32 data;
+
+	/* Read data within offset dword. */
+	shift = (unsigned long)src & 0x3;
+	data = readl_relaxed(src - shift);
+	if (!shift) {
+		ret.x[0] = data;
+		return ret;
+	}
+	ret.x[0] = data >> (shift * BITS_PER_BYTE);
+
+	/* Read data from the next dword. */
+	shift = 4 - shift;
+	if (ofs + shift >= map->size)
+		return ret;
+
+	data = readl_relaxed(src + shift);
+	ret.x[0] |= data << (shift * BITS_PER_BYTE);
+
+	return ret;
+}
+
+static void __xipram bt1_rom_map_copy_from(struct map_info *map,
+					   void *to, unsigned long from,
+					   ssize_t len)
+{
+	void __iomem *src = map->virt + from;
+	ssize_t shift, chunk;
+	u32 data;
+
+	if (len <= 0 || from >= map->size)
+		return;
+
+	/* Make sure we don't go over the map limit. */
+	len = min_t(ssize_t, map->size - from, len);
+
+	/*
+	 * Since requested data size can be pretty big we have to implement
+	 * the copy procedure as optimal as possible. That's why it's split
+	 * up into the next three stages: unaligned head, aligned body,
+	 * unaligned tail.
+	 */
+	shift = (ssize_t)src & 0x3;
+	if (shift) {
+		chunk = min_t(ssize_t, 4 - shift, len);
+		data = readl_relaxed(src - shift);
+		memcpy(to, &data + shift, chunk);
+		src += chunk;
+		to += chunk;
+		len -= chunk;
+	}
+
+	while (len >= 4) {
+		data = readl_relaxed(src);
+		memcpy(to, &data, 4);
+		src += 4;
+		to += 4;
+		len -= 4;
+	}
+
+	if (len) {
+		data = readl_relaxed(src);
+		memcpy(to, &data, len);
+	}
+}
+
+int of_flash_probe_bt1_rom(struct platform_device *pdev,
+			   struct device_node *np,
+			   struct map_info *map)
+{
+	struct device *dev = &pdev->dev;
+
+	/* It's supposed to be read-only MTD. */
+	if (!of_device_is_compatible(np, "mtd-rom")) {
+		dev_info(dev, "No mtd-rom compatible string\n");
+		return 0;
+	}
+
+	/* Multiplatform guard. */
+	if (!of_device_is_compatible(np, "baikal,bt1-int-rom"))
+		return 0;
+
+	/* Sanity check the device parameters retrieved from DTB. */
+	if (map->bankwidth != 4)
+		dev_warn(dev, "Bank width is supposed to be 32 bits wide\n");
+
+	map->read = bt1_rom_map_read;
+	map->copy_from = bt1_rom_map_copy_from;
+
+	return 0;
+}
diff --git a/drivers/mtd/maps/physmap-bt1-rom.h b/drivers/mtd/maps/physmap-bt1-rom.h
new file mode 100644
index 000000000000..6782899598a4
--- /dev/null
+++ b/drivers/mtd/maps/physmap-bt1-rom.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#include <linux/mtd/map.h>
+#include <linux/of.h>
+
+#ifdef CONFIG_MTD_PHYSMAP_BT1_ROM
+int of_flash_probe_bt1_rom(struct platform_device *pdev,
+			   struct device_node *np,
+			   struct map_info *map);
+#else
+static inline
+int of_flash_probe_bt1_rom(struct platform_device *pdev,
+			   struct device_node *np,
+			   struct map_info *map)
+{
+	return 0;
+}
+#endif
diff --git a/drivers/mtd/maps/physmap-core.c b/drivers/mtd/maps/physmap-core.c
index 8f7f966fa9a7..001ed5deb622 100644
--- a/drivers/mtd/maps/physmap-core.c
+++ b/drivers/mtd/maps/physmap-core.c
@@ -41,6 +41,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/gpio/consumer.h>
 
+#include "physmap-bt1-rom.h"
 #include "physmap-gemini.h"
 #include "physmap-ixp4xx.h"
 #include "physmap-versatile.h"
@@ -371,6 +372,10 @@ static int physmap_flash_of_init(struct platform_device *dev)
 		info->maps[i].bankwidth = bankwidth;
 		info->maps[i].device_node = dp;
 
+		err = of_flash_probe_bt1_rom(dev, dp, &info->maps[i]);
+		if (err)
+			return err;
+
 		err = of_flash_probe_gemini(dev, dp, &info->maps[i]);
 		if (err)
 			return err;
@@ -515,7 +520,8 @@ static int physmap_flash_probe(struct platform_device *dev)
 		dev_notice(&dev->dev, "physmap platform flash device: %pR\n",
 			   res);
 
-		info->maps[i].name = dev_name(&dev->dev);
+		if (!info->maps[i].name)
+			info->maps[i].name = dev_name(&dev->dev);
 
 		if (!info->maps[i].phys)
 			info->maps[i].phys = res->start;
diff --git a/drivers/mtd/maps/vmu-flash.c b/drivers/mtd/maps/vmu-flash.c
index 177bf134e189..a7ec947a3ebb 100644
--- a/drivers/mtd/maps/vmu-flash.c
+++ b/drivers/mtd/maps/vmu-flash.c
@@ -40,7 +40,7 @@ struct memcard {
 	u32 blocklen;
 	u32 writecnt;
 	u32 readcnt;
-	u32 removeable;
+	u32 removable;
 	int partition;
 	int read;
 	unsigned char *blockread;
@@ -619,7 +619,7 @@ static int vmu_connect(struct maple_device *mdev)
 	card->blocklen = ((basic_flash_data >> 16 & 0xFF) + 1) << 5;
 	card->writecnt = basic_flash_data >> 12 & 0xF;
 	card->readcnt = basic_flash_data >> 8 & 0xF;
-	card->removeable = basic_flash_data >> 7 & 1;
+	card->removable = basic_flash_data >> 7 & 1;
 
 	card->partition = 0;
 
@@ -772,7 +772,6 @@ static void vmu_file_error(struct maple_device *mdev, void *recvbuf)
 
 static int probe_maple_vmu(struct device *dev)
 {
-	int error;
 	struct maple_device *mdev = to_maple_dev(dev);
 	struct maple_driver *mdrv = to_maple_driver(dev->driver);
 
@@ -780,11 +779,7 @@ static int probe_maple_vmu(struct device *dev)
 	mdev->fileerr_handler = vmu_file_error;
 	mdev->driver = mdrv;
 
-	error = vmu_connect(mdev);
-	if (error)
-		return error;
-
-	return 0;
+	return vmu_connect(mdev);
 }
 
 static int remove_maple_vmu(struct device *dev)
diff --git a/drivers/mtd/mtdconcat.c b/drivers/mtd/mtdconcat.c
index 1d6c9e7e7b7d..6e4d0017c0bd 100644
--- a/drivers/mtd/mtdconcat.c
+++ b/drivers/mtd/mtdconcat.c
@@ -103,6 +103,47 @@ concat_read(struct mtd_info *mtd, loff_t from, size_t len,
 }
 
 static int
+concat_panic_write(struct mtd_info *mtd, loff_t to, size_t len,
+	     size_t * retlen, const u_char * buf)
+{
+	struct mtd_concat *concat = CONCAT(mtd);
+	int err = -EINVAL;
+	int i;
+	for (i = 0; i < concat->num_subdev; i++) {
+		struct mtd_info *subdev = concat->subdev[i];
+		size_t size, retsize;
+
+		if (to >= subdev->size) {
+			to -= subdev->size;
+			continue;
+		}
+		if (to + len > subdev->size)
+			size = subdev->size - to;
+		else
+			size = len;
+
+		err = mtd_panic_write(subdev, to, size, &retsize, buf);
+		if (err == -EOPNOTSUPP) {
+			printk(KERN_ERR "mtdconcat: Cannot write from panic without panic_write\n");
+			return err;
+		}
+		if (err)
+			break;
+
+		*retlen += retsize;
+		len -= size;
+		if (len == 0)
+			break;
+
+		err = -EINVAL;
+		buf += size;
+		to = 0;
+	}
+	return err;
+}
+
+
+static int
 concat_write(struct mtd_info *mtd, loff_t to, size_t len,
 	     size_t * retlen, const u_char * buf)
 {
@@ -648,6 +689,8 @@ struct mtd_info *mtd_concat_create(struct mtd_info *subdev[],	/* subdevices to c
 		concat->mtd._block_isbad = concat_block_isbad;
 	if (subdev[0]->_block_markbad)
 		concat->mtd._block_markbad = concat_block_markbad;
+	if (subdev[0]->_panic_write)
+		concat->mtd._panic_write = concat_panic_write;
 
 	concat->mtd.ecc_stats.badblocks = subdev[0]->ecc_stats.badblocks;
 
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index b5e5d3140f57..e9e163ae9d86 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -335,7 +335,7 @@ static const struct device_type mtd_devtype = {
 	.release	= mtd_release,
 };
 
-static int mtd_partid_show(struct seq_file *s, void *p)
+static int mtd_partid_debug_show(struct seq_file *s, void *p)
 {
 	struct mtd_info *mtd = s->private;
 
@@ -344,19 +344,9 @@ static int mtd_partid_show(struct seq_file *s, void *p)
 	return 0;
 }
 
-static int mtd_partid_debugfs_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, mtd_partid_show, inode->i_private);
-}
-
-static const struct file_operations mtd_partid_debug_fops = {
-	.open           = mtd_partid_debugfs_open,
-	.read           = seq_read,
-	.llseek         = seq_lseek,
-	.release        = single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(mtd_partid_debug);
 
-static int mtd_partname_show(struct seq_file *s, void *p)
+static int mtd_partname_debug_show(struct seq_file *s, void *p)
 {
 	struct mtd_info *mtd = s->private;
 
@@ -365,17 +355,7 @@ static int mtd_partname_show(struct seq_file *s, void *p)
 	return 0;
 }
 
-static int mtd_partname_debugfs_open(struct inode *inode, struct file *file)
-{
-	return single_open(file, mtd_partname_show, inode->i_private);
-}
-
-static const struct file_operations mtd_partname_debug_fops = {
-	.open           = mtd_partname_debugfs_open,
-	.read           = seq_read,
-	.llseek         = seq_lseek,
-	.release        = single_release,
-};
+DEFINE_SHOW_ATTRIBUTE(mtd_partname_debug);
 
 static struct dentry *dfs_dir_mtd;
 
diff --git a/drivers/mtd/mtdoops.c b/drivers/mtd/mtdoops.c
index 4ced68be7ed7..774970bfcf85 100644
--- a/drivers/mtd/mtdoops.c
+++ b/drivers/mtd/mtdoops.c
@@ -279,12 +279,13 @@ static void mtdoops_do_dump(struct kmsg_dumper *dumper,
 	kmsg_dump_get_buffer(dumper, true, cxt->oops_buf + MTDOOPS_HEADER_SIZE,
 			     record_size - MTDOOPS_HEADER_SIZE, NULL);
 
-	/* Panics must be written immediately */
-	if (reason != KMSG_DUMP_OOPS)
+	if (reason != KMSG_DUMP_OOPS) {
+		/* Panics must be written immediately */
 		mtdoops_write(cxt, 1);
-
-	/* For other cases, schedule work to write it "nicely" */
-	schedule_work(&cxt->work_write);
+	} else {
+		/* For other cases, schedule work to write it "nicely" */
+		schedule_work(&cxt->work_write);
+	}
 }
 
 static void mtdoops_notify_add(struct mtd_info *mtd)
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index c1a45b071165..4a9aed4f0104 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -9,4 +9,12 @@ source "drivers/mtd/nand/onenand/Kconfig"
 source "drivers/mtd/nand/raw/Kconfig"
 source "drivers/mtd/nand/spi/Kconfig"
 
+menu "ECC engine support"
+
+config MTD_NAND_ECC
+       bool
+       depends on MTD_NAND_CORE
+
+endmenu
+
 endmenu
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 7ecd80c0a66e..981372953b56 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -6,3 +6,5 @@ obj-$(CONFIG_MTD_NAND_CORE) += nandcore.o
 obj-y	+= onenand/
 obj-y	+= raw/
 obj-y	+= spi/
+
+nandcore-$(CONFIG_MTD_NAND_ECC) += ecc.o
diff --git a/drivers/mtd/nand/ecc.c b/drivers/mtd/nand/ecc.c
new file mode 100644
index 000000000000..4a56e6c0da67
--- /dev/null
+++ b/drivers/mtd/nand/ecc.c
@@ -0,0 +1,484 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Generic Error-Correcting Code (ECC) engine
+ *
+ * Copyright (C) 2019 Macronix
+ * Author:
+ *     Miquèl RAYNAL <miquel.raynal@bootlin.com>
+ *
+ *
+ * This file describes the abstraction of any NAND ECC engine. It has been
+ * designed to fit most cases, including parallel NANDs and SPI-NANDs.
+ *
+ * There are three main situations where instantiating this ECC engine makes
+ * sense:
+ *   - external: The ECC engine is outside the NAND pipeline, typically this
+ *               is a software ECC engine, or an hardware engine that is
+ *               outside the NAND controller pipeline.
+ *   - pipelined: The ECC engine is inside the NAND pipeline, ie. on the
+ *                controller's side. This is the case of most of the raw NAND
+ *                controllers. In the pipeline case, the ECC bytes are
+ *                generated/data corrected on the fly when a page is
+ *                written/read.
+ *   - ondie: The ECC engine is inside the NAND pipeline, on the chip's side.
+ *            Some NAND chips can correct themselves the data.
+ *
+ * Besides the initial setup and final cleanups, the interfaces are rather
+ * simple:
+ *   - prepare: Prepare an I/O request. Enable/disable the ECC engine based on
+ *              the I/O request type. In case of software correction or external
+ *              engine, this step may involve to derive the ECC bytes and place
+ *              them in the OOB area before a write.
+ *   - finish: Finish an I/O request. Correct the data in case of a read
+ *             request and report the number of corrected bits/uncorrectable
+ *             errors. Most likely empty for write operations, unless you have
+ *             hardware specific stuff to do, like shutting down the engine to
+ *             save power.
+ *
+ * The I/O request should be enclosed in a prepare()/finish() pair of calls
+ * and will behave differently depending on the requested I/O type:
+ *   - raw: Correction disabled
+ *   - ecc: Correction enabled
+ *
+ * The request direction is impacting the logic as well:
+ *   - read: Load data from the NAND chip
+ *   - write: Store data in the NAND chip
+ *
+ * Mixing all this combinations together gives the following behavior.
+ * Those are just examples, drivers are free to add custom steps in their
+ * prepare/finish hook.
+ *
+ * [external ECC engine]
+ *   - external + prepare + raw + read: do nothing
+ *   - external + finish  + raw + read: do nothing
+ *   - external + prepare + raw + write: do nothing
+ *   - external + finish  + raw + write: do nothing
+ *   - external + prepare + ecc + read: do nothing
+ *   - external + finish  + ecc + read: calculate expected ECC bytes, extract
+ *                                      ECC bytes from OOB buffer, correct
+ *                                      and report any bitflip/error
+ *   - external + prepare + ecc + write: calculate ECC bytes and store them at
+ *                                       the right place in the OOB buffer based
+ *                                       on the OOB layout
+ *   - external + finish  + ecc + write: do nothing
+ *
+ * [pipelined ECC engine]
+ *   - pipelined + prepare + raw + read: disable the controller's ECC engine if
+ *                                       activated
+ *   - pipelined + finish  + raw + read: do nothing
+ *   - pipelined + prepare + raw + write: disable the controller's ECC engine if
+ *                                        activated
+ *   - pipelined + finish  + raw + write: do nothing
+ *   - pipelined + prepare + ecc + read: enable the controller's ECC engine if
+ *                                       deactivated
+ *   - pipelined + finish  + ecc + read: check the status, report any
+ *                                       error/bitflip
+ *   - pipelined + prepare + ecc + write: enable the controller's ECC engine if
+ *                                        deactivated
+ *   - pipelined + finish  + ecc + write: do nothing
+ *
+ * [ondie ECC engine]
+ *   - ondie + prepare + raw + read: send commands to disable the on-chip ECC
+ *                                   engine if activated
+ *   - ondie + finish  + raw + read: do nothing
+ *   - ondie + prepare + raw + write: send commands to disable the on-chip ECC
+ *                                    engine if activated
+ *   - ondie + finish  + raw + write: do nothing
+ *   - ondie + prepare + ecc + read: send commands to enable the on-chip ECC
+ *                                   engine if deactivated
+ *   - ondie + finish  + ecc + read: send commands to check the status, report
+ *                                   any error/bitflip
+ *   - ondie + prepare + ecc + write: send commands to enable the on-chip ECC
+ *                                    engine if deactivated
+ *   - ondie + finish  + ecc + write: do nothing
+ */
+
+#include <linux/module.h>
+#include <linux/mtd/nand.h>
+
+/**
+ * nand_ecc_init_ctx - Init the ECC engine context
+ * @nand: the NAND device
+ *
+ * On success, the caller is responsible of calling @nand_ecc_cleanup_ctx().
+ */
+int nand_ecc_init_ctx(struct nand_device *nand)
+{
+	if (!nand->ecc.engine->ops->init_ctx)
+		return 0;
+
+	return nand->ecc.engine->ops->init_ctx(nand);
+}
+EXPORT_SYMBOL(nand_ecc_init_ctx);
+
+/**
+ * nand_ecc_cleanup_ctx - Cleanup the ECC engine context
+ * @nand: the NAND device
+ */
+void nand_ecc_cleanup_ctx(struct nand_device *nand)
+{
+	if (nand->ecc.engine->ops->cleanup_ctx)
+		nand->ecc.engine->ops->cleanup_ctx(nand);
+}
+EXPORT_SYMBOL(nand_ecc_cleanup_ctx);
+
+/**
+ * nand_ecc_prepare_io_req - Prepare an I/O request
+ * @nand: the NAND device
+ * @req: the I/O request
+ */
+int nand_ecc_prepare_io_req(struct nand_device *nand,
+			    struct nand_page_io_req *req)
+{
+	if (!nand->ecc.engine->ops->prepare_io_req)
+		return 0;
+
+	return nand->ecc.engine->ops->prepare_io_req(nand, req);
+}
+EXPORT_SYMBOL(nand_ecc_prepare_io_req);
+
+/**
+ * nand_ecc_finish_io_req - Finish an I/O request
+ * @nand: the NAND device
+ * @req: the I/O request
+ */
+int nand_ecc_finish_io_req(struct nand_device *nand,
+			   struct nand_page_io_req *req)
+{
+	if (!nand->ecc.engine->ops->finish_io_req)
+		return 0;
+
+	return nand->ecc.engine->ops->finish_io_req(nand, req);
+}
+EXPORT_SYMBOL(nand_ecc_finish_io_req);
+
+/* Define default OOB placement schemes for large and small page devices */
+static int nand_ooblayout_ecc_sp(struct mtd_info *mtd, int section,
+				 struct mtd_oob_region *oobregion)
+{
+	struct nand_device *nand = mtd_to_nanddev(mtd);
+	unsigned int total_ecc_bytes = nand->ecc.ctx.total;
+
+	if (section > 1)
+		return -ERANGE;
+
+	if (!section) {
+		oobregion->offset = 0;
+		if (mtd->oobsize == 16)
+			oobregion->length = 4;
+		else
+			oobregion->length = 3;
+	} else {
+		if (mtd->oobsize == 8)
+			return -ERANGE;
+
+		oobregion->offset = 6;
+		oobregion->length = total_ecc_bytes - 4;
+	}
+
+	return 0;
+}
+
+static int nand_ooblayout_free_sp(struct mtd_info *mtd, int section,
+				  struct mtd_oob_region *oobregion)
+{
+	if (section > 1)
+		return -ERANGE;
+
+	if (mtd->oobsize == 16) {
+		if (section)
+			return -ERANGE;
+
+		oobregion->length = 8;
+		oobregion->offset = 8;
+	} else {
+		oobregion->length = 2;
+		if (!section)
+			oobregion->offset = 3;
+		else
+			oobregion->offset = 6;
+	}
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops nand_ooblayout_sp_ops = {
+	.ecc = nand_ooblayout_ecc_sp,
+	.free = nand_ooblayout_free_sp,
+};
+
+const struct mtd_ooblayout_ops *nand_get_small_page_ooblayout(void)
+{
+	return &nand_ooblayout_sp_ops;
+}
+EXPORT_SYMBOL_GPL(nand_get_small_page_ooblayout);
+
+static int nand_ooblayout_ecc_lp(struct mtd_info *mtd, int section,
+				 struct mtd_oob_region *oobregion)
+{
+	struct nand_device *nand = mtd_to_nanddev(mtd);
+	unsigned int total_ecc_bytes = nand->ecc.ctx.total;
+
+	if (section || !total_ecc_bytes)
+		return -ERANGE;
+
+	oobregion->length = total_ecc_bytes;
+	oobregion->offset = mtd->oobsize - oobregion->length;
+
+	return 0;
+}
+
+static int nand_ooblayout_free_lp(struct mtd_info *mtd, int section,
+				  struct mtd_oob_region *oobregion)
+{
+	struct nand_device *nand = mtd_to_nanddev(mtd);
+	unsigned int total_ecc_bytes = nand->ecc.ctx.total;
+
+	if (section)
+		return -ERANGE;
+
+	oobregion->length = mtd->oobsize - total_ecc_bytes - 2;
+	oobregion->offset = 2;
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops nand_ooblayout_lp_ops = {
+	.ecc = nand_ooblayout_ecc_lp,
+	.free = nand_ooblayout_free_lp,
+};
+
+const struct mtd_ooblayout_ops *nand_get_large_page_ooblayout(void)
+{
+	return &nand_ooblayout_lp_ops;
+}
+EXPORT_SYMBOL_GPL(nand_get_large_page_ooblayout);
+
+/*
+ * Support the old "large page" layout used for 1-bit Hamming ECC where ECC
+ * are placed at a fixed offset.
+ */
+static int nand_ooblayout_ecc_lp_hamming(struct mtd_info *mtd, int section,
+					 struct mtd_oob_region *oobregion)
+{
+	struct nand_device *nand = mtd_to_nanddev(mtd);
+	unsigned int total_ecc_bytes = nand->ecc.ctx.total;
+
+	if (section)
+		return -ERANGE;
+
+	switch (mtd->oobsize) {
+	case 64:
+		oobregion->offset = 40;
+		break;
+	case 128:
+		oobregion->offset = 80;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	oobregion->length = total_ecc_bytes;
+	if (oobregion->offset + oobregion->length > mtd->oobsize)
+		return -ERANGE;
+
+	return 0;
+}
+
+static int nand_ooblayout_free_lp_hamming(struct mtd_info *mtd, int section,
+					  struct mtd_oob_region *oobregion)
+{
+	struct nand_device *nand = mtd_to_nanddev(mtd);
+	unsigned int total_ecc_bytes = nand->ecc.ctx.total;
+	int ecc_offset = 0;
+
+	if (section < 0 || section > 1)
+		return -ERANGE;
+
+	switch (mtd->oobsize) {
+	case 64:
+		ecc_offset = 40;
+		break;
+	case 128:
+		ecc_offset = 80;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	if (section == 0) {
+		oobregion->offset = 2;
+		oobregion->length = ecc_offset - 2;
+	} else {
+		oobregion->offset = ecc_offset + total_ecc_bytes;
+		oobregion->length = mtd->oobsize - oobregion->offset;
+	}
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops nand_ooblayout_lp_hamming_ops = {
+	.ecc = nand_ooblayout_ecc_lp_hamming,
+	.free = nand_ooblayout_free_lp_hamming,
+};
+
+const struct mtd_ooblayout_ops *nand_get_large_page_hamming_ooblayout(void)
+{
+	return &nand_ooblayout_lp_hamming_ops;
+}
+EXPORT_SYMBOL_GPL(nand_get_large_page_hamming_ooblayout);
+
+static enum nand_ecc_engine_type
+of_get_nand_ecc_engine_type(struct device_node *np)
+{
+	struct device_node *eng_np;
+
+	if (of_property_read_bool(np, "nand-no-ecc-engine"))
+		return NAND_ECC_ENGINE_TYPE_NONE;
+
+	if (of_property_read_bool(np, "nand-use-soft-ecc-engine"))
+		return NAND_ECC_ENGINE_TYPE_SOFT;
+
+	eng_np = of_parse_phandle(np, "nand-ecc-engine", 0);
+	of_node_put(eng_np);
+
+	if (eng_np) {
+		if (eng_np == np)
+			return NAND_ECC_ENGINE_TYPE_ON_DIE;
+		else
+			return NAND_ECC_ENGINE_TYPE_ON_HOST;
+	}
+
+	return NAND_ECC_ENGINE_TYPE_INVALID;
+}
+
+static const char * const nand_ecc_placement[] = {
+	[NAND_ECC_PLACEMENT_OOB] = "oob",
+	[NAND_ECC_PLACEMENT_INTERLEAVED] = "interleaved",
+};
+
+static enum nand_ecc_placement of_get_nand_ecc_placement(struct device_node *np)
+{
+	enum nand_ecc_placement placement;
+	const char *pm;
+	int err;
+
+	err = of_property_read_string(np, "nand-ecc-placement", &pm);
+	if (!err) {
+		for (placement = NAND_ECC_PLACEMENT_OOB;
+		     placement < ARRAY_SIZE(nand_ecc_placement); placement++) {
+			if (!strcasecmp(pm, nand_ecc_placement[placement]))
+				return placement;
+		}
+	}
+
+	return NAND_ECC_PLACEMENT_UNKNOWN;
+}
+
+static const char * const nand_ecc_algos[] = {
+	[NAND_ECC_ALGO_HAMMING] = "hamming",
+	[NAND_ECC_ALGO_BCH] = "bch",
+	[NAND_ECC_ALGO_RS] = "rs",
+};
+
+static enum nand_ecc_algo of_get_nand_ecc_algo(struct device_node *np)
+{
+	enum nand_ecc_algo ecc_algo;
+	const char *pm;
+	int err;
+
+	err = of_property_read_string(np, "nand-ecc-algo", &pm);
+	if (!err) {
+		for (ecc_algo = NAND_ECC_ALGO_HAMMING;
+		     ecc_algo < ARRAY_SIZE(nand_ecc_algos);
+		     ecc_algo++) {
+			if (!strcasecmp(pm, nand_ecc_algos[ecc_algo]))
+				return ecc_algo;
+		}
+	}
+
+	return NAND_ECC_ALGO_UNKNOWN;
+}
+
+static int of_get_nand_ecc_step_size(struct device_node *np)
+{
+	int ret;
+	u32 val;
+
+	ret = of_property_read_u32(np, "nand-ecc-step-size", &val);
+	return ret ? ret : val;
+}
+
+static int of_get_nand_ecc_strength(struct device_node *np)
+{
+	int ret;
+	u32 val;
+
+	ret = of_property_read_u32(np, "nand-ecc-strength", &val);
+	return ret ? ret : val;
+}
+
+void of_get_nand_ecc_user_config(struct nand_device *nand)
+{
+	struct device_node *dn = nanddev_get_of_node(nand);
+	int strength, size;
+
+	nand->ecc.user_conf.engine_type = of_get_nand_ecc_engine_type(dn);
+	nand->ecc.user_conf.algo = of_get_nand_ecc_algo(dn);
+	nand->ecc.user_conf.placement = of_get_nand_ecc_placement(dn);
+
+	strength = of_get_nand_ecc_strength(dn);
+	if (strength >= 0)
+		nand->ecc.user_conf.strength = strength;
+
+	size = of_get_nand_ecc_step_size(dn);
+	if (size >= 0)
+		nand->ecc.user_conf.step_size = size;
+
+	if (of_property_read_bool(dn, "nand-ecc-maximize"))
+		nand->ecc.user_conf.flags |= NAND_ECC_MAXIMIZE_STRENGTH;
+}
+EXPORT_SYMBOL(of_get_nand_ecc_user_config);
+
+/**
+ * nand_ecc_is_strong_enough - Check if the chip configuration meets the
+ *                             datasheet requirements.
+ *
+ * @nand: Device to check
+ *
+ * If our configuration corrects A bits per B bytes and the minimum
+ * required correction level is X bits per Y bytes, then we must ensure
+ * both of the following are true:
+ *
+ * (1) A / B >= X / Y
+ * (2) A >= X
+ *
+ * Requirement (1) ensures we can correct for the required bitflip density.
+ * Requirement (2) ensures we can correct even when all bitflips are clumped
+ * in the same sector.
+ */
+bool nand_ecc_is_strong_enough(struct nand_device *nand)
+{
+	const struct nand_ecc_props *reqs = nanddev_get_ecc_requirements(nand);
+	const struct nand_ecc_props *conf = nanddev_get_ecc_conf(nand);
+	struct mtd_info *mtd = nanddev_to_mtd(nand);
+	int corr, ds_corr;
+
+	if (conf->step_size == 0 || reqs->step_size == 0)
+		/* Not enough information */
+		return true;
+
+	/*
+	 * We get the number of corrected bits per page to compare
+	 * the correction density.
+	 */
+	corr = (mtd->writesize * conf->strength) / conf->step_size;
+	ds_corr = (mtd->writesize * reqs->strength) / reqs->step_size;
+
+	return corr >= ds_corr && conf->strength >= reqs->strength;
+}
+EXPORT_SYMBOL(nand_ecc_is_strong_enough);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Miquel Raynal <miquel.raynal@bootlin.com>");
+MODULE_DESCRIPTION("Generic ECC engine");
diff --git a/drivers/mtd/nand/onenand/onenand_base.c b/drivers/mtd/nand/onenand/onenand_base.c
index ec18ade33262..188b8061e1f7 100644
--- a/drivers/mtd/nand/onenand/onenand_base.c
+++ b/drivers/mtd/nand/onenand/onenand_base.c
@@ -1052,16 +1052,11 @@ static int onenand_transfer_auto_oob(struct mtd_info *mtd, uint8_t *buf, int col
 				int thislen)
 {
 	struct onenand_chip *this = mtd->priv;
-	int ret;
 
 	this->read_bufferram(mtd, ONENAND_SPARERAM, this->oob_buf, 0,
 			     mtd->oobsize);
-	ret = mtd_ooblayout_get_databytes(mtd, buf, this->oob_buf,
-					  column, thislen);
-	if (ret)
-		return ret;
-
-	return 0;
+	return mtd_ooblayout_get_databytes(mtd, buf, this->oob_buf,
+					   column, thislen);
 }
 
 /**
diff --git a/drivers/mtd/nand/onenand/onenand_omap2.c b/drivers/mtd/nand/onenand/onenand_omap2.c
index aa9368bf7a0c..d8c0bd002c2b 100644
--- a/drivers/mtd/nand/onenand/onenand_omap2.c
+++ b/drivers/mtd/nand/onenand/onenand_omap2.c
@@ -494,11 +494,8 @@ static int omap2_onenand_probe(struct platform_device *pdev)
 
 	c->int_gpiod = devm_gpiod_get_optional(dev, "int", GPIOD_IN);
 	if (IS_ERR(c->int_gpiod)) {
-		r = PTR_ERR(c->int_gpiod);
 		/* Just try again if this happens */
-		if (r != -EPROBE_DEFER)
-			dev_err(dev, "error getting gpio: %d\n", r);
-		return r;
+		return dev_err_probe(dev, PTR_ERR(c->int_gpiod), "error getting gpio\n");
 	}
 
 	if (c->int_gpiod) {
diff --git a/drivers/mtd/nand/raw/Kconfig b/drivers/mtd/nand/raw/Kconfig
index 1203775023ad..6c46f25b57e2 100644
--- a/drivers/mtd/nand/raw/Kconfig
+++ b/drivers/mtd/nand/raw/Kconfig
@@ -13,6 +13,7 @@ config MTD_NAND_ECC_SW_HAMMING_SMC
 menuconfig MTD_RAW_NAND
 	tristate "Raw/Parallel NAND Device Support"
 	select MTD_NAND_CORE
+	select MTD_NAND_ECC
 	select MTD_NAND_ECC_SW_HAMMING
 	help
 	  This enables support for accessing all type of raw/parallel
diff --git a/drivers/mtd/nand/raw/ams-delta.c b/drivers/mtd/nand/raw/ams-delta.c
index fdba155416d2..d3c5cc513c8f 100644
--- a/drivers/mtd/nand/raw/ams-delta.c
+++ b/drivers/mtd/nand/raw/ams-delta.c
@@ -260,8 +260,8 @@ static int gpio_nand_probe(struct platform_device *pdev)
 		return err;
 	}
 
-	this->ecc.mode = NAND_ECC_SOFT;
-	this->ecc.algo = NAND_ECC_HAMMING;
+	this->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
+	this->ecc.algo = NAND_ECC_ALGO_HAMMING;
 
 	platform_set_drvdata(pdev, priv);
 
@@ -400,12 +400,14 @@ static int gpio_nand_remove(struct platform_device *pdev)
 	return 0;
 }
 
+#ifdef CONFIG_OF
 static const struct of_device_id gpio_nand_of_id_table[] = {
 	{
 		/* sentinel */
 	},
 };
 MODULE_DEVICE_TABLE(of, gpio_nand_of_id_table);
+#endif
 
 static const struct platform_device_id gpio_nand_plat_id_table[] = {
 	{
diff --git a/drivers/mtd/nand/raw/arasan-nand-controller.c b/drivers/mtd/nand/raw/arasan-nand-controller.c
index 12c643e97c85..fbb4ea751be8 100644
--- a/drivers/mtd/nand/raw/arasan-nand-controller.c
+++ b/drivers/mtd/nand/raw/arasan-nand-controller.c
@@ -980,10 +980,10 @@ static int anfc_init_hw_ecc_controller(struct arasan_nfc *nfc,
 		return -EINVAL;
 	}
 
-	mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
+	mtd_set_ooblayout(mtd, nand_get_large_page_ooblayout());
 
 	ecc->steps = mtd->writesize / ecc->size;
-	ecc->algo = NAND_ECC_BCH;
+	ecc->algo = NAND_ECC_ALGO_BCH;
 	anand->ecc_bits = bch_gf_mag * ecc->strength;
 	ecc->bytes = DIV_ROUND_UP(anand->ecc_bits, 8);
 	anand->ecc_total = DIV_ROUND_UP(anand->ecc_bits * ecc->steps, 8);
@@ -1056,17 +1056,17 @@ static int anfc_attach_chip(struct nand_chip *chip)
 	chip->ecc.read_page_raw = nand_monolithic_read_page_raw;
 	chip->ecc.write_page_raw = nand_monolithic_write_page_raw;
 
-	switch (chip->ecc.mode) {
-	case NAND_ECC_NONE:
-	case NAND_ECC_SOFT:
-	case NAND_ECC_ON_DIE:
+	switch (chip->ecc.engine_type) {
+	case NAND_ECC_ENGINE_TYPE_NONE:
+	case NAND_ECC_ENGINE_TYPE_SOFT:
+	case NAND_ECC_ENGINE_TYPE_ON_DIE:
 		break;
-	case NAND_ECC_HW:
+	case NAND_ECC_ENGINE_TYPE_ON_HOST:
 		ret = anfc_init_hw_ecc_controller(nfc, chip);
 		break;
 	default:
 		dev_err(nfc->dev, "Unsupported ECC mode: %d\n",
-			chip->ecc.mode);
+			chip->ecc.engine_type);
 		return -EINVAL;
 	}
 
diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c
index c9818f548d07..e6ceec8f50dc 100644
--- a/drivers/mtd/nand/raw/atmel/nand-controller.c
+++ b/drivers/mtd/nand/raw/atmel/nand-controller.c
@@ -202,6 +202,8 @@ struct atmel_nand_controller_ops {
 	int (*ecc_init)(struct nand_chip *chip);
 	int (*setup_interface)(struct atmel_nand *nand, int csline,
 			       const struct nand_interface_config *conf);
+	int (*exec_op)(struct atmel_nand *nand,
+		       const struct nand_operation *op, bool check_only);
 };
 
 struct atmel_nand_controller_caps {
@@ -259,6 +261,7 @@ struct atmel_hsmc_nand_controller {
 	struct regmap *io;
 	struct atmel_nfc_op op;
 	struct completion complete;
+	u32 cfg;
 	int irq;
 
 	/* Only used when instantiating from legacy DT bindings. */
@@ -414,29 +417,62 @@ err:
 	return -EIO;
 }
 
-static u8 atmel_nand_read_byte(struct nand_chip *chip)
+static int atmel_nfc_exec_op(struct atmel_hsmc_nand_controller *nc, bool poll)
 {
-	struct atmel_nand *nand = to_atmel_nand(chip);
+	u8 *addrs = nc->op.addrs;
+	unsigned int op = 0;
+	u32 addr, val;
+	int i, ret;
 
-	return ioread8(nand->activecs->io.virt);
-}
+	nc->op.wait = ATMEL_HSMC_NFC_SR_CMDDONE;
 
-static void atmel_nand_write_byte(struct nand_chip *chip, u8 byte)
-{
-	struct atmel_nand *nand = to_atmel_nand(chip);
+	for (i = 0; i < nc->op.ncmds; i++)
+		op |= ATMEL_NFC_CMD(i, nc->op.cmds[i]);
 
-	if (chip->options & NAND_BUSWIDTH_16)
-		iowrite16(byte | (byte << 8), nand->activecs->io.virt);
-	else
-		iowrite8(byte, nand->activecs->io.virt);
+	if (nc->op.naddrs == ATMEL_NFC_MAX_ADDR_CYCLES)
+		regmap_write(nc->base.smc, ATMEL_HSMC_NFC_ADDR, *addrs++);
+
+	op |= ATMEL_NFC_CSID(nc->op.cs) |
+	      ATMEL_NFC_ACYCLE(nc->op.naddrs);
+
+	if (nc->op.ncmds > 1)
+		op |= ATMEL_NFC_VCMD2;
+
+	addr = addrs[0] | (addrs[1] << 8) | (addrs[2] << 16) |
+	       (addrs[3] << 24);
+
+	if (nc->op.data != ATMEL_NFC_NO_DATA) {
+		op |= ATMEL_NFC_DATAEN;
+		nc->op.wait |= ATMEL_HSMC_NFC_SR_XFRDONE;
+
+		if (nc->op.data == ATMEL_NFC_WRITE_DATA)
+			op |= ATMEL_NFC_NFCWR;
+	}
+
+	/* Clear all flags. */
+	regmap_read(nc->base.smc, ATMEL_HSMC_NFC_SR, &val);
+
+	/* Send the command. */
+	regmap_write(nc->io, op, addr);
+
+	ret = atmel_nfc_wait(nc, poll, 0);
+	if (ret)
+		dev_err(nc->base.dev,
+			"Failed to send NAND command (err = %d)!",
+			ret);
+
+	/* Reset the op state. */
+	memset(&nc->op, 0, sizeof(nc->op));
+
+	return ret;
 }
 
-static void atmel_nand_read_buf(struct nand_chip *chip, u8 *buf, int len)
+static void atmel_nand_data_in(struct atmel_nand *nand, void *buf,
+			       unsigned int len, bool force_8bit)
 {
-	struct atmel_nand *nand = to_atmel_nand(chip);
 	struct atmel_nand_controller *nc;
 
-	nc = to_nand_controller(chip->controller);
+	nc = to_nand_controller(nand->base.controller);
 
 	/*
 	 * If the controller supports DMA, the buffer address is DMA-able and
@@ -444,23 +480,23 @@ static void atmel_nand_read_buf(struct nand_chip *chip, u8 *buf, int len)
 	 * a DMA transfer. If it fails, fallback to PIO mode.
 	 */
 	if (nc->dmac && virt_addr_valid(buf) &&
-	    len >= MIN_DMA_LEN &&
+	    len >= MIN_DMA_LEN && !force_8bit &&
 	    !atmel_nand_dma_transfer(nc, buf, nand->activecs->io.dma, len,
 				     DMA_FROM_DEVICE))
 		return;
 
-	if (chip->options & NAND_BUSWIDTH_16)
+	if ((nand->base.options & NAND_BUSWIDTH_16) && !force_8bit)
 		ioread16_rep(nand->activecs->io.virt, buf, len / 2);
 	else
 		ioread8_rep(nand->activecs->io.virt, buf, len);
 }
 
-static void atmel_nand_write_buf(struct nand_chip *chip, const u8 *buf, int len)
+static void atmel_nand_data_out(struct atmel_nand *nand, const void *buf,
+				unsigned int len, bool force_8bit)
 {
-	struct atmel_nand *nand = to_atmel_nand(chip);
 	struct atmel_nand_controller *nc;
 
-	nc = to_nand_controller(chip->controller);
+	nc = to_nand_controller(nand->base.controller);
 
 	/*
 	 * If the controller supports DMA, the buffer address is DMA-able and
@@ -468,179 +504,213 @@ static void atmel_nand_write_buf(struct nand_chip *chip, const u8 *buf, int len)
 	 * a DMA transfer. If it fails, fallback to PIO mode.
 	 */
 	if (nc->dmac && virt_addr_valid(buf) &&
-	    len >= MIN_DMA_LEN &&
+	    len >= MIN_DMA_LEN && !force_8bit &&
 	    !atmel_nand_dma_transfer(nc, (void *)buf, nand->activecs->io.dma,
 				     len, DMA_TO_DEVICE))
 		return;
 
-	if (chip->options & NAND_BUSWIDTH_16)
+	if ((nand->base.options & NAND_BUSWIDTH_16) && !force_8bit)
 		iowrite16_rep(nand->activecs->io.virt, buf, len / 2);
 	else
 		iowrite8_rep(nand->activecs->io.virt, buf, len);
 }
 
-static int atmel_nand_dev_ready(struct nand_chip *chip)
+static int atmel_nand_waitrdy(struct atmel_nand *nand, unsigned int timeout_ms)
 {
-	struct atmel_nand *nand = to_atmel_nand(chip);
+	if (nand->activecs->rb.type == ATMEL_NAND_NO_RB)
+		return nand_soft_waitrdy(&nand->base, timeout_ms);
 
-	return gpiod_get_value(nand->activecs->rb.gpio);
+	return nand_gpio_waitrdy(&nand->base, nand->activecs->rb.gpio,
+				 timeout_ms);
 }
 
-static void atmel_nand_select_chip(struct nand_chip *chip, int cs)
+static int atmel_hsmc_nand_waitrdy(struct atmel_nand *nand,
+				   unsigned int timeout_ms)
 {
-	struct atmel_nand *nand = to_atmel_nand(chip);
-
-	if (cs < 0 || cs >= nand->numcs) {
-		nand->activecs = NULL;
-		chip->legacy.dev_ready = NULL;
-		return;
-	}
+	struct atmel_hsmc_nand_controller *nc;
+	u32 status, mask;
 
-	nand->activecs = &nand->cs[cs];
+	if (nand->activecs->rb.type != ATMEL_NAND_NATIVE_RB)
+		return atmel_nand_waitrdy(nand, timeout_ms);
 
-	if (nand->activecs->rb.type == ATMEL_NAND_GPIO_RB)
-		chip->legacy.dev_ready = atmel_nand_dev_ready;
+	nc = to_hsmc_nand_controller(nand->base.controller);
+	mask = ATMEL_HSMC_NFC_SR_RBEDGE(nand->activecs->rb.id);
+	return regmap_read_poll_timeout_atomic(nc->base.smc, ATMEL_HSMC_NFC_SR,
+					       status, status & mask,
+					       10, timeout_ms * 1000);
 }
 
-static int atmel_hsmc_nand_dev_ready(struct nand_chip *chip)
+static void atmel_nand_select_target(struct atmel_nand *nand,
+				     unsigned int cs)
 {
-	struct atmel_nand *nand = to_atmel_nand(chip);
-	struct atmel_hsmc_nand_controller *nc;
-	u32 status;
-
-	nc = to_hsmc_nand_controller(chip->controller);
-
-	regmap_read(nc->base.smc, ATMEL_HSMC_NFC_SR, &status);
-
-	return status & ATMEL_HSMC_NFC_SR_RBEDGE(nand->activecs->rb.id);
+	nand->activecs = &nand->cs[cs];
 }
 
-static void atmel_hsmc_nand_select_chip(struct nand_chip *chip, int cs)
+static void atmel_hsmc_nand_select_target(struct atmel_nand *nand,
+					  unsigned int cs)
 {
-	struct mtd_info *mtd = nand_to_mtd(chip);
-	struct atmel_nand *nand = to_atmel_nand(chip);
+	struct mtd_info *mtd = nand_to_mtd(&nand->base);
 	struct atmel_hsmc_nand_controller *nc;
+	u32 cfg = ATMEL_HSMC_NFC_CFG_PAGESIZE(mtd->writesize) |
+		  ATMEL_HSMC_NFC_CFG_SPARESIZE(mtd->oobsize) |
+		  ATMEL_HSMC_NFC_CFG_RSPARE;
 
-	nc = to_hsmc_nand_controller(chip->controller);
-
-	atmel_nand_select_chip(chip, cs);
-
-	if (!nand->activecs) {
-		regmap_write(nc->base.smc, ATMEL_HSMC_NFC_CTRL,
-			     ATMEL_HSMC_NFC_CTRL_DIS);
+	nand->activecs = &nand->cs[cs];
+	nc = to_hsmc_nand_controller(nand->base.controller);
+	if (nc->cfg == cfg)
 		return;
-	}
-
-	if (nand->activecs->rb.type == ATMEL_NAND_NATIVE_RB)
-		chip->legacy.dev_ready = atmel_hsmc_nand_dev_ready;
 
 	regmap_update_bits(nc->base.smc, ATMEL_HSMC_NFC_CFG,
 			   ATMEL_HSMC_NFC_CFG_PAGESIZE_MASK |
 			   ATMEL_HSMC_NFC_CFG_SPARESIZE_MASK |
 			   ATMEL_HSMC_NFC_CFG_RSPARE |
 			   ATMEL_HSMC_NFC_CFG_WSPARE,
-			   ATMEL_HSMC_NFC_CFG_PAGESIZE(mtd->writesize) |
-			   ATMEL_HSMC_NFC_CFG_SPARESIZE(mtd->oobsize) |
-			   ATMEL_HSMC_NFC_CFG_RSPARE);
-	regmap_write(nc->base.smc, ATMEL_HSMC_NFC_CTRL,
-		     ATMEL_HSMC_NFC_CTRL_EN);
+			   cfg);
+	nc->cfg = cfg;
 }
 
-static int atmel_nfc_exec_op(struct atmel_hsmc_nand_controller *nc, bool poll)
+static int atmel_smc_nand_exec_instr(struct atmel_nand *nand,
+				     const struct nand_op_instr *instr)
 {
-	u8 *addrs = nc->op.addrs;
-	unsigned int op = 0;
-	u32 addr, val;
-	int i, ret;
-
-	nc->op.wait = ATMEL_HSMC_NFC_SR_CMDDONE;
-
-	for (i = 0; i < nc->op.ncmds; i++)
-		op |= ATMEL_NFC_CMD(i, nc->op.cmds[i]);
-
-	if (nc->op.naddrs == ATMEL_NFC_MAX_ADDR_CYCLES)
-		regmap_write(nc->base.smc, ATMEL_HSMC_NFC_ADDR, *addrs++);
-
-	op |= ATMEL_NFC_CSID(nc->op.cs) |
-	      ATMEL_NFC_ACYCLE(nc->op.naddrs);
-
-	if (nc->op.ncmds > 1)
-		op |= ATMEL_NFC_VCMD2;
-
-	addr = addrs[0] | (addrs[1] << 8) | (addrs[2] << 16) |
-	       (addrs[3] << 24);
-
-	if (nc->op.data != ATMEL_NFC_NO_DATA) {
-		op |= ATMEL_NFC_DATAEN;
-		nc->op.wait |= ATMEL_HSMC_NFC_SR_XFRDONE;
+	struct atmel_nand_controller *nc;
+	unsigned int i;
 
-		if (nc->op.data == ATMEL_NFC_WRITE_DATA)
-			op |= ATMEL_NFC_NFCWR;
+	nc = to_nand_controller(nand->base.controller);
+	switch (instr->type) {
+	case NAND_OP_CMD_INSTR:
+		writeb(instr->ctx.cmd.opcode,
+		       nand->activecs->io.virt + nc->caps->cle_offs);
+		return 0;
+	case NAND_OP_ADDR_INSTR:
+		for (i = 0; i < instr->ctx.addr.naddrs; i++)
+			writeb(instr->ctx.addr.addrs[i],
+			       nand->activecs->io.virt + nc->caps->ale_offs);
+		return 0;
+	case NAND_OP_DATA_IN_INSTR:
+		atmel_nand_data_in(nand, instr->ctx.data.buf.in,
+				   instr->ctx.data.len,
+				   instr->ctx.data.force_8bit);
+		return 0;
+	case NAND_OP_DATA_OUT_INSTR:
+		atmel_nand_data_out(nand, instr->ctx.data.buf.out,
+				    instr->ctx.data.len,
+				    instr->ctx.data.force_8bit);
+		return 0;
+	case NAND_OP_WAITRDY_INSTR:
+		return atmel_nand_waitrdy(nand,
+					  instr->ctx.waitrdy.timeout_ms);
+	default:
+		break;
 	}
 
-	/* Clear all flags. */
-	regmap_read(nc->base.smc, ATMEL_HSMC_NFC_SR, &val);
+	return -EINVAL;
+}
 
-	/* Send the command. */
-	regmap_write(nc->io, op, addr);
+static int atmel_smc_nand_exec_op(struct atmel_nand *nand,
+				  const struct nand_operation *op,
+				  bool check_only)
+{
+	unsigned int i;
+	int ret = 0;
 
-	ret = atmel_nfc_wait(nc, poll, 0);
-	if (ret)
-		dev_err(nc->base.dev,
-			"Failed to send NAND command (err = %d)!",
-			ret);
+	if (check_only)
+		return 0;
 
-	/* Reset the op state. */
-	memset(&nc->op, 0, sizeof(nc->op));
+	atmel_nand_select_target(nand, op->cs);
+	gpiod_set_value(nand->activecs->csgpio, 0);
+	for (i = 0; i < op->ninstrs; i++) {
+		ret = atmel_smc_nand_exec_instr(nand, &op->instrs[i]);
+		if (ret)
+			break;
+	}
+	gpiod_set_value(nand->activecs->csgpio, 1);
 
 	return ret;
 }
 
-static void atmel_hsmc_nand_cmd_ctrl(struct nand_chip *chip, int dat,
-				     unsigned int ctrl)
+static int atmel_hsmc_exec_cmd_addr(struct nand_chip *chip,
+				    const struct nand_subop *subop)
 {
 	struct atmel_nand *nand = to_atmel_nand(chip);
 	struct atmel_hsmc_nand_controller *nc;
+	unsigned int i, j;
 
 	nc = to_hsmc_nand_controller(chip->controller);
 
-	if (ctrl & NAND_ALE) {
-		if (nc->op.naddrs == ATMEL_NFC_MAX_ADDR_CYCLES)
-			return;
+	nc->op.cs = nand->activecs->id;
+	for (i = 0; i < subop->ninstrs; i++) {
+		const struct nand_op_instr *instr = &subop->instrs[i];
 
-		nc->op.addrs[nc->op.naddrs++] = dat;
-	} else if (ctrl & NAND_CLE) {
-		if (nc->op.ncmds > 1)
-			return;
+		if (instr->type == NAND_OP_CMD_INSTR) {
+			nc->op.cmds[nc->op.ncmds++] = instr->ctx.cmd.opcode;
+			continue;
+		}
 
-		nc->op.cmds[nc->op.ncmds++] = dat;
+		for (j = nand_subop_get_addr_start_off(subop, i);
+		     j < nand_subop_get_num_addr_cyc(subop, i); j++) {
+			nc->op.addrs[nc->op.naddrs] = instr->ctx.addr.addrs[j];
+			nc->op.naddrs++;
+		}
 	}
 
-	if (dat == NAND_CMD_NONE) {
-		nc->op.cs = nand->activecs->id;
-		atmel_nfc_exec_op(nc, true);
-	}
+	return atmel_nfc_exec_op(nc, true);
 }
 
-static void atmel_nand_cmd_ctrl(struct nand_chip *chip, int cmd,
-				unsigned int ctrl)
+static int atmel_hsmc_exec_rw(struct nand_chip *chip,
+			      const struct nand_subop *subop)
 {
+	const struct nand_op_instr *instr = subop->instrs;
 	struct atmel_nand *nand = to_atmel_nand(chip);
-	struct atmel_nand_controller *nc;
 
-	nc = to_nand_controller(chip->controller);
+	if (instr->type == NAND_OP_DATA_IN_INSTR)
+		atmel_nand_data_in(nand, instr->ctx.data.buf.in,
+				   instr->ctx.data.len,
+				   instr->ctx.data.force_8bit);
+	else
+		atmel_nand_data_out(nand, instr->ctx.data.buf.out,
+				    instr->ctx.data.len,
+				    instr->ctx.data.force_8bit);
 
-	if ((ctrl & NAND_CTRL_CHANGE) && nand->activecs->csgpio) {
-		if (ctrl & NAND_NCE)
-			gpiod_set_value(nand->activecs->csgpio, 0);
-		else
-			gpiod_set_value(nand->activecs->csgpio, 1);
-	}
+	return 0;
+}
+
+static int atmel_hsmc_exec_waitrdy(struct nand_chip *chip,
+				   const struct nand_subop *subop)
+{
+	const struct nand_op_instr *instr = subop->instrs;
+	struct atmel_nand *nand = to_atmel_nand(chip);
 
-	if (ctrl & NAND_ALE)
-		writeb(cmd, nand->activecs->io.virt + nc->caps->ale_offs);
-	else if (ctrl & NAND_CLE)
-		writeb(cmd, nand->activecs->io.virt + nc->caps->cle_offs);
+	return atmel_hsmc_nand_waitrdy(nand, instr->ctx.waitrdy.timeout_ms);
+}
+
+static const struct nand_op_parser atmel_hsmc_op_parser = NAND_OP_PARSER(
+	NAND_OP_PARSER_PATTERN(atmel_hsmc_exec_cmd_addr,
+		NAND_OP_PARSER_PAT_CMD_ELEM(true),
+		NAND_OP_PARSER_PAT_ADDR_ELEM(true, 5),
+		NAND_OP_PARSER_PAT_CMD_ELEM(true)),
+	NAND_OP_PARSER_PATTERN(atmel_hsmc_exec_rw,
+		NAND_OP_PARSER_PAT_DATA_IN_ELEM(false, 0)),
+	NAND_OP_PARSER_PATTERN(atmel_hsmc_exec_rw,
+		NAND_OP_PARSER_PAT_DATA_OUT_ELEM(false, 0)),
+	NAND_OP_PARSER_PATTERN(atmel_hsmc_exec_waitrdy,
+		NAND_OP_PARSER_PAT_WAITRDY_ELEM(false)),
+);
+
+static int atmel_hsmc_nand_exec_op(struct atmel_nand *nand,
+				   const struct nand_operation *op,
+				   bool check_only)
+{
+	int ret;
+
+	if (check_only)
+		return nand_op_parser_exec_op(&nand->base,
+					      &atmel_hsmc_op_parser, op, true);
+
+	atmel_hsmc_nand_select_target(nand, op->cs);
+	ret = nand_op_parser_exec_op(&nand->base, &atmel_hsmc_op_parser, op,
+				     false);
+
+	return ret;
 }
 
 static void atmel_nfc_copy_to_sram(struct nand_chip *chip, const u8 *buf,
@@ -838,7 +908,7 @@ static int atmel_nand_pmecc_write_pg(struct nand_chip *chip, const u8 *buf,
 	if (ret)
 		return ret;
 
-	atmel_nand_write_buf(chip, buf, mtd->writesize);
+	nand_write_data_op(chip, buf, mtd->writesize, false);
 
 	ret = atmel_nand_pmecc_generate_eccbytes(chip, raw);
 	if (ret) {
@@ -848,7 +918,7 @@ static int atmel_nand_pmecc_write_pg(struct nand_chip *chip, const u8 *buf,
 
 	atmel_nand_pmecc_disable(chip, raw);
 
-	atmel_nand_write_buf(chip, chip->oob_poi, mtd->oobsize);
+	nand_write_data_op(chip, chip->oob_poi, mtd->oobsize, false);
 
 	return nand_prog_page_end_op(chip);
 }
@@ -878,11 +948,17 @@ static int atmel_nand_pmecc_read_pg(struct nand_chip *chip, u8 *buf,
 	if (ret)
 		return ret;
 
-	atmel_nand_read_buf(chip, buf, mtd->writesize);
-	atmel_nand_read_buf(chip, chip->oob_poi, mtd->oobsize);
+	ret = nand_read_data_op(chip, buf, mtd->writesize, false, false);
+	if (ret)
+		goto out_disable;
+
+	ret = nand_read_data_op(chip, chip->oob_poi, mtd->oobsize, false, false);
+	if (ret)
+		goto out_disable;
 
 	ret = atmel_nand_pmecc_correct_data(chip, buf, raw);
 
+out_disable:
 	atmel_nand_pmecc_disable(chip, raw);
 
 	return ret;
@@ -907,8 +983,9 @@ static int atmel_hsmc_nand_pmecc_write_pg(struct nand_chip *chip,
 	struct mtd_info *mtd = nand_to_mtd(chip);
 	struct atmel_nand *nand = to_atmel_nand(chip);
 	struct atmel_hsmc_nand_controller *nc;
-	int ret, status;
+	int ret;
 
+	atmel_hsmc_nand_select_target(nand, chip->cur_cs);
 	nc = to_hsmc_nand_controller(chip->controller);
 
 	atmel_nfc_copy_to_sram(chip, buf, false);
@@ -939,21 +1016,9 @@ static int atmel_hsmc_nand_pmecc_write_pg(struct nand_chip *chip,
 	if (ret)
 		return ret;
 
-	atmel_nand_write_buf(chip, chip->oob_poi, mtd->oobsize);
-
-	nc->op.cmds[0] = NAND_CMD_PAGEPROG;
-	nc->op.ncmds = 1;
-	nc->op.cs = nand->activecs->id;
-	ret = atmel_nfc_exec_op(nc, false);
-	if (ret)
-		dev_err(nc->base.dev, "Failed to program NAND page (err = %d)\n",
-			ret);
-
-	status = chip->legacy.waitfunc(chip);
-	if (status & NAND_STATUS_FAIL)
-		return -EIO;
+	nand_write_data_op(chip, chip->oob_poi, mtd->oobsize, false);
 
-	return ret;
+	return nand_prog_page_end_op(chip);
 }
 
 static int atmel_hsmc_nand_pmecc_write_page(struct nand_chip *chip,
@@ -981,6 +1046,7 @@ static int atmel_hsmc_nand_pmecc_read_pg(struct nand_chip *chip, u8 *buf,
 	struct atmel_hsmc_nand_controller *nc;
 	int ret;
 
+	atmel_hsmc_nand_select_target(nand, chip->cur_cs);
 	nc = to_hsmc_nand_controller(chip->controller);
 
 	/*
@@ -988,12 +1054,9 @@ static int atmel_hsmc_nand_pmecc_read_pg(struct nand_chip *chip, u8 *buf,
 	 * connected to a native SoC R/B pin. If that's not the case, fallback
 	 * to the non-optimized one.
 	 */
-	if (nand->activecs->rb.type != ATMEL_NAND_NATIVE_RB) {
-		nand_read_page_op(chip, page, 0, NULL, 0);
-
+	if (nand->activecs->rb.type != ATMEL_NAND_NATIVE_RB)
 		return atmel_nand_pmecc_read_pg(chip, buf, oob_required, page,
 						raw);
-	}
 
 	nc->op.cmds[nc->op.ncmds++] = NAND_CMD_READ0;
 
@@ -1043,7 +1106,10 @@ static int atmel_hsmc_nand_pmecc_read_page_raw(struct nand_chip *chip,
 
 static int atmel_nand_pmecc_init(struct nand_chip *chip)
 {
+	const struct nand_ecc_props *requirements =
+		nanddev_get_ecc_requirements(&chip->base);
 	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct nand_device *nanddev = mtd_to_nanddev(mtd);
 	struct atmel_nand *nand = to_atmel_nand(chip);
 	struct atmel_nand_controller *nc;
 	struct atmel_pmecc_user_req req;
@@ -1068,19 +1134,19 @@ static int atmel_nand_pmecc_init(struct nand_chip *chip)
 			chip->ecc.size = val;
 	}
 
-	if (chip->ecc.options & NAND_ECC_MAXIMIZE)
+	if (nanddev->ecc.user_conf.flags & NAND_ECC_MAXIMIZE_STRENGTH)
 		req.ecc.strength = ATMEL_PMECC_MAXIMIZE_ECC_STRENGTH;
 	else if (chip->ecc.strength)
 		req.ecc.strength = chip->ecc.strength;
-	else if (chip->base.eccreq.strength)
-		req.ecc.strength = chip->base.eccreq.strength;
+	else if (requirements->strength)
+		req.ecc.strength = requirements->strength;
 	else
 		req.ecc.strength = ATMEL_PMECC_MAXIMIZE_ECC_STRENGTH;
 
 	if (chip->ecc.size)
 		req.ecc.sectorsize = chip->ecc.size;
-	else if (chip->base.eccreq.step_size)
-		req.ecc.sectorsize = chip->base.eccreq.step_size;
+	else if (requirements->step_size)
+		req.ecc.sectorsize = requirements->step_size;
 	else
 		req.ecc.sectorsize = ATMEL_PMECC_SECTOR_SIZE_AUTO;
 
@@ -1099,14 +1165,14 @@ static int atmel_nand_pmecc_init(struct nand_chip *chip)
 	if (IS_ERR(nand->pmecc))
 		return PTR_ERR(nand->pmecc);
 
-	chip->ecc.algo = NAND_ECC_BCH;
+	chip->ecc.algo = NAND_ECC_ALGO_BCH;
 	chip->ecc.size = req.ecc.sectorsize;
 	chip->ecc.bytes = req.ecc.bytes / req.ecc.nsectors;
 	chip->ecc.strength = req.ecc.strength;
 
 	chip->options |= NAND_NO_SUBPAGE_WRITE;
 
-	mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
+	mtd_set_ooblayout(mtd, nand_get_large_page_ooblayout());
 
 	return 0;
 }
@@ -1118,15 +1184,15 @@ static int atmel_nand_ecc_init(struct nand_chip *chip)
 
 	nc = to_nand_controller(chip->controller);
 
-	switch (chip->ecc.mode) {
-	case NAND_ECC_NONE:
-	case NAND_ECC_SOFT:
+	switch (chip->ecc.engine_type) {
+	case NAND_ECC_ENGINE_TYPE_NONE:
+	case NAND_ECC_ENGINE_TYPE_SOFT:
 		/*
 		 * Nothing to do, the core will initialize everything for us.
 		 */
 		break;
 
-	case NAND_ECC_HW:
+	case NAND_ECC_ENGINE_TYPE_ON_HOST:
 		ret = atmel_nand_pmecc_init(chip);
 		if (ret)
 			return ret;
@@ -1140,7 +1206,7 @@ static int atmel_nand_ecc_init(struct nand_chip *chip)
 	default:
 		/* Other modes are not supported. */
 		dev_err(nc->dev, "Unsupported ECC mode: %d\n",
-			chip->ecc.mode);
+			chip->ecc.engine_type);
 		return -ENOTSUPP;
 	}
 
@@ -1155,7 +1221,7 @@ static int atmel_hsmc_nand_ecc_init(struct nand_chip *chip)
 	if (ret)
 		return ret;
 
-	if (chip->ecc.mode != NAND_ECC_HW)
+	if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
 		return 0;
 
 	/* Adjust the ECC operations for the HSMC IP. */
@@ -1467,6 +1533,18 @@ static int atmel_nand_setup_interface(struct nand_chip *chip, int csline,
 	return nc->caps->ops->setup_interface(nand, csline, conf);
 }
 
+static int atmel_nand_exec_op(struct nand_chip *chip,
+			      const struct nand_operation *op,
+			      bool check_only)
+{
+	struct atmel_nand *nand = to_atmel_nand(chip);
+	struct atmel_nand_controller *nc;
+
+	nc = to_nand_controller(nand->base.controller);
+
+	return nc->caps->ops->exec_op(nand, op, check_only);
+}
+
 static void atmel_nand_init(struct atmel_nand_controller *nc,
 			    struct atmel_nand *nand)
 {
@@ -1476,19 +1554,9 @@ static void atmel_nand_init(struct atmel_nand_controller *nc,
 	mtd->dev.parent = nc->dev;
 	nand->base.controller = &nc->base;
 
-	chip->legacy.cmd_ctrl = atmel_nand_cmd_ctrl;
-	chip->legacy.read_byte = atmel_nand_read_byte;
-	chip->legacy.write_byte = atmel_nand_write_byte;
-	chip->legacy.read_buf = atmel_nand_read_buf;
-	chip->legacy.write_buf = atmel_nand_write_buf;
-	chip->legacy.select_chip = atmel_nand_select_chip;
-
 	if (!nc->mck || !nc->caps->ops->setup_interface)
 		chip->options |= NAND_KEEP_TIMINGS;
 
-	/* Some NANDs require a longer delay than the default one (20us). */
-	chip->legacy.chip_delay = 40;
-
 	/*
 	 * Use a bounce buffer when the buffer passed by the MTD user is not
 	 * suitable for DMA.
@@ -1498,7 +1566,7 @@ static void atmel_nand_init(struct atmel_nand_controller *nc,
 
 	/* Default to HW ECC if pmecc is available. */
 	if (nc->pmecc)
-		chip->ecc.mode = NAND_ECC_HW;
+		chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
 }
 
 static void atmel_smc_nand_init(struct atmel_nand_controller *nc,
@@ -1527,18 +1595,6 @@ static void atmel_smc_nand_init(struct atmel_nand_controller *nc,
 				   smc_nc->ebi_csa->nfd0_on_d16);
 }
 
-static void atmel_hsmc_nand_init(struct atmel_nand_controller *nc,
-				 struct atmel_nand *nand)
-{
-	struct nand_chip *chip = &nand->base;
-
-	atmel_nand_init(nc, nand);
-
-	/* Overload some methods for the HSMC controller. */
-	chip->legacy.cmd_ctrl = atmel_hsmc_nand_cmd_ctrl;
-	chip->legacy.select_chip = atmel_hsmc_nand_select_chip;
-}
-
 static int atmel_nand_controller_remove_nand(struct atmel_nand *nand)
 {
 	struct nand_chip *chip = &nand->base;
@@ -1957,6 +2013,7 @@ static int atmel_nand_attach_chip(struct nand_chip *chip)
 static const struct nand_controller_ops atmel_nand_controller_ops = {
 	.attach_chip = atmel_nand_attach_chip,
 	.setup_interface = atmel_nand_setup_interface,
+	.exec_op = atmel_nand_exec_op,
 };
 
 static int atmel_nand_controller_init(struct atmel_nand_controller *nc,
@@ -1976,13 +2033,9 @@ static int atmel_nand_controller_init(struct atmel_nand_controller *nc,
 	platform_set_drvdata(pdev, nc);
 
 	nc->pmecc = devm_atmel_pmecc_get(dev);
-	if (IS_ERR(nc->pmecc)) {
-		ret = PTR_ERR(nc->pmecc);
-		if (ret != -EPROBE_DEFER)
-			dev_err(dev, "Could not get PMECC object (err = %d)\n",
-				ret);
-		return ret;
-	}
+	if (IS_ERR(nc->pmecc))
+		return dev_err_probe(dev, PTR_ERR(nc->pmecc),
+				     "Could not get PMECC object\n");
 
 	if (nc->caps->has_dma && !atmel_nand_avoid_dma) {
 		dma_cap_mask_t mask;
@@ -2248,6 +2301,9 @@ atmel_hsmc_nand_controller_remove(struct atmel_nand_controller *nc)
 		return ret;
 
 	hsmc_nc = container_of(nc, struct atmel_hsmc_nand_controller, base);
+	regmap_write(hsmc_nc->base.smc, ATMEL_HSMC_NFC_CTRL,
+		     ATMEL_HSMC_NFC_CTRL_DIS);
+
 	if (hsmc_nc->sram.pool)
 		gen_pool_free(hsmc_nc->sram.pool,
 			      (unsigned long)hsmc_nc->sram.virt,
@@ -2300,6 +2356,8 @@ static int atmel_hsmc_nand_controller_probe(struct platform_device *pdev,
 	/* Initial NFC configuration. */
 	regmap_write(nc->base.smc, ATMEL_HSMC_NFC_CFG,
 		     ATMEL_HSMC_NFC_CFG_DTO_MAX);
+	regmap_write(nc->base.smc, ATMEL_HSMC_NFC_CTRL,
+		     ATMEL_HSMC_NFC_CTRL_EN);
 
 	ret = atmel_nand_controller_add_nands(&nc->base);
 	if (ret)
@@ -2317,8 +2375,9 @@ static const struct atmel_nand_controller_ops atmel_hsmc_nc_ops = {
 	.probe = atmel_hsmc_nand_controller_probe,
 	.remove = atmel_hsmc_nand_controller_remove,
 	.ecc_init = atmel_hsmc_nand_ecc_init,
-	.nand_init = atmel_hsmc_nand_init,
+	.nand_init = atmel_nand_init,
 	.setup_interface = atmel_hsmc_nand_setup_interface,
+	.exec_op = atmel_hsmc_nand_exec_op,
 };
 
 static const struct atmel_nand_controller_caps atmel_sama5_nc_caps = {
@@ -2385,6 +2444,7 @@ static const struct atmel_nand_controller_ops at91rm9200_nc_ops = {
 	.remove = atmel_smc_nand_controller_remove,
 	.ecc_init = atmel_nand_ecc_init,
 	.nand_init = atmel_smc_nand_init,
+	.exec_op = atmel_smc_nand_exec_op,
 };
 
 static const struct atmel_nand_controller_caps atmel_rm9200_nc_caps = {
@@ -2400,6 +2460,7 @@ static const struct atmel_nand_controller_ops atmel_smc_nc_ops = {
 	.ecc_init = atmel_nand_ecc_init,
 	.nand_init = atmel_smc_nand_init,
 	.setup_interface = atmel_smc_nand_setup_interface,
+	.exec_op = atmel_smc_nand_exec_op,
 };
 
 static const struct atmel_nand_controller_caps atmel_sam9260_nc_caps = {
diff --git a/drivers/mtd/nand/raw/au1550nd.c b/drivers/mtd/nand/raw/au1550nd.c
index d865200ccd08..79b057400fe9 100644
--- a/drivers/mtd/nand/raw/au1550nd.c
+++ b/drivers/mtd/nand/raw/au1550nd.c
@@ -294,8 +294,8 @@ static int au1550nd_probe(struct platform_device *pdev)
 	nand_controller_init(&ctx->controller);
 	ctx->controller.ops = &au1550nd_ops;
 	this->controller = &ctx->controller;
-	this->ecc.mode = NAND_ECC_SOFT;
-	this->ecc.algo = NAND_ECC_HAMMING;
+	this->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
+	this->ecc.algo = NAND_ECC_ALGO_HAMMING;
 
 	if (pd->devwidth)
 		this->options |= NAND_BUSWIDTH_16;
diff --git a/drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c b/drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c
index 591775173034..8bb17c5a66c3 100644
--- a/drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c
+++ b/drivers/mtd/nand/raw/bcm47xxnflash/ops_bcm4706.c
@@ -391,7 +391,8 @@ int bcm47xxnflash_ops_bcm4706_init(struct bcm47xxnflash *b47n)
 
 	nand_chip->legacy.chip_delay = 50;
 	b47n->nand_chip.bbt_options = NAND_BBT_USE_FLASH;
-	b47n->nand_chip.ecc.mode = NAND_ECC_NONE; /* TODO: implement ECC */
+	/* TODO: implement ECC */
+	b47n->nand_chip.ecc.engine_type = NAND_ECC_ENGINE_TYPE_NONE;
 
 	/* Enable NAND flash access */
 	bcma_cc_set32(b47n->cc, BCMA_CC_4706_FLASHSCFG,
diff --git a/drivers/mtd/nand/raw/brcmnand/brcmnand.c b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
index a4033d32a710..2da39ab89286 100644
--- a/drivers/mtd/nand/raw/brcmnand/brcmnand.c
+++ b/drivers/mtd/nand/raw/brcmnand/brcmnand.c
@@ -2532,6 +2532,8 @@ static int brcmnand_setup_dev(struct brcmnand_host *host)
 {
 	struct mtd_info *mtd = nand_to_mtd(&host->chip);
 	struct nand_chip *chip = &host->chip;
+	const struct nand_ecc_props *requirements =
+		nanddev_get_ecc_requirements(&chip->base);
 	struct brcmnand_controller *ctrl = host->ctrl;
 	struct brcmnand_cfg *cfg = &host->hwcfg;
 	char msg[128];
@@ -2565,34 +2567,34 @@ static int brcmnand_setup_dev(struct brcmnand_host *host)
 	cfg->col_adr_bytes = 2;
 	cfg->blk_adr_bytes = get_blk_adr_bytes(mtd->size, mtd->writesize);
 
-	if (chip->ecc.mode != NAND_ECC_HW) {
+	if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST) {
 		dev_err(ctrl->dev, "only HW ECC supported; selected: %d\n",
-			chip->ecc.mode);
+			chip->ecc.engine_type);
 		return -EINVAL;
 	}
 
-	if (chip->ecc.algo == NAND_ECC_UNKNOWN) {
+	if (chip->ecc.algo == NAND_ECC_ALGO_UNKNOWN) {
 		if (chip->ecc.strength == 1 && chip->ecc.size == 512)
 			/* Default to Hamming for 1-bit ECC, if unspecified */
-			chip->ecc.algo = NAND_ECC_HAMMING;
+			chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
 		else
 			/* Otherwise, BCH */
-			chip->ecc.algo = NAND_ECC_BCH;
+			chip->ecc.algo = NAND_ECC_ALGO_BCH;
 	}
 
-	if (chip->ecc.algo == NAND_ECC_HAMMING && (chip->ecc.strength != 1 ||
-						   chip->ecc.size != 512)) {
+	if (chip->ecc.algo == NAND_ECC_ALGO_HAMMING &&
+	    (chip->ecc.strength != 1 || chip->ecc.size != 512)) {
 		dev_err(ctrl->dev, "invalid Hamming params: %d bits per %d bytes\n",
 			chip->ecc.strength, chip->ecc.size);
 		return -EINVAL;
 	}
 
-	if (chip->ecc.mode != NAND_ECC_NONE &&
+	if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_NONE &&
 	    (!chip->ecc.size || !chip->ecc.strength)) {
-		if (chip->base.eccreq.step_size && chip->base.eccreq.strength) {
+		if (requirements->step_size && requirements->strength) {
 			/* use detected ECC parameters */
-			chip->ecc.size = chip->base.eccreq.step_size;
-			chip->ecc.strength = chip->base.eccreq.strength;
+			chip->ecc.size = requirements->step_size;
+			chip->ecc.strength = requirements->strength;
 			dev_info(ctrl->dev, "Using ECC step-size %d, strength %d\n",
 				chip->ecc.size, chip->ecc.strength);
 		}
@@ -2600,7 +2602,7 @@ static int brcmnand_setup_dev(struct brcmnand_host *host)
 
 	switch (chip->ecc.size) {
 	case 512:
-		if (chip->ecc.algo == NAND_ECC_HAMMING)
+		if (chip->ecc.algo == NAND_ECC_ALGO_HAMMING)
 			cfg->ecc_level = 15;
 		else
 			cfg->ecc_level = chip->ecc.strength;
@@ -2728,7 +2730,7 @@ static int brcmnand_init_cs(struct brcmnand_host *host, struct device_node *dn)
 	chip->legacy.read_buf = brcmnand_read_buf;
 	chip->legacy.write_buf = brcmnand_write_buf;
 
-	chip->ecc.mode = NAND_ECC_HW;
+	chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
 	chip->ecc.read_page = brcmnand_read_page;
 	chip->ecc.write_page = brcmnand_write_page;
 	chip->ecc.read_page_raw = brcmnand_read_page_raw;
diff --git a/drivers/mtd/nand/raw/cadence-nand-controller.c b/drivers/mtd/nand/raw/cadence-nand-controller.c
index 71516af85f23..b46786cd53e0 100644
--- a/drivers/mtd/nand/raw/cadence-nand-controller.c
+++ b/drivers/mtd/nand/raw/cadence-nand-controller.c
@@ -2611,7 +2611,7 @@ static int cadence_nand_attach_chip(struct nand_chip *chip)
 
 	chip->bbt_options |= NAND_BBT_USE_FLASH;
 	chip->bbt_options |= NAND_BBT_NO_OOB;
-	chip->ecc.mode = NAND_ECC_HW;
+	chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
 
 	chip->options |= NAND_NO_SUBPAGE_WRITE;
 
@@ -2757,7 +2757,7 @@ static int cadence_nand_chip_init(struct cdns_nand_ctrl *cdns_ctrl,
 	 * Default to HW ECC engine mode. If the nand-ecc-mode property is given
 	 * in the DT node, this entry will be overwritten in nand_scan_ident().
 	 */
-	chip->ecc.mode = NAND_ECC_HW;
+	chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
 
 	ret = nand_scan(chip, cdns_chip->nsels);
 	if (ret) {
@@ -2980,18 +2980,14 @@ static int cadence_nand_dt_probe(struct platform_device *ofdev)
 	dev_info(cdns_ctrl->dev, "IRQ: nr %d\n", cdns_ctrl->irq);
 
 	cdns_ctrl->reg = devm_platform_ioremap_resource(ofdev, 0);
-	if (IS_ERR(cdns_ctrl->reg)) {
-		dev_err(&ofdev->dev, "devm_ioremap_resource res 0 failed\n");
+	if (IS_ERR(cdns_ctrl->reg))
 		return PTR_ERR(cdns_ctrl->reg);
-	}
 
 	res = platform_get_resource(ofdev, IORESOURCE_MEM, 1);
 	cdns_ctrl->io.dma = res->start;
 	cdns_ctrl->io.virt = devm_ioremap_resource(&ofdev->dev, res);
-	if (IS_ERR(cdns_ctrl->io.virt)) {
-		dev_err(cdns_ctrl->dev, "devm_ioremap_resource res 1 failed\n");
+	if (IS_ERR(cdns_ctrl->io.virt))
 		return PTR_ERR(cdns_ctrl->io.virt);
-	}
 
 	dt->clk = devm_clk_get(cdns_ctrl->dev, "nf_clk");
 	if (IS_ERR(dt->clk))
diff --git a/drivers/mtd/nand/raw/cafe_nand.c b/drivers/mtd/nand/raw/cafe_nand.c
index 92173790f20b..2b94f385a1a8 100644
--- a/drivers/mtd/nand/raw/cafe_nand.c
+++ b/drivers/mtd/nand/raw/cafe_nand.c
@@ -629,7 +629,8 @@ static int cafe_nand_attach_chip(struct nand_chip *chip)
 		goto out_free_dma;
 	}
 
-	cafe->nand.ecc.mode = NAND_ECC_HW_SYNDROME;
+	cafe->nand.ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
+	cafe->nand.ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
 	cafe->nand.ecc.size = mtd->writesize;
 	cafe->nand.ecc.bytes = 14;
 	cafe->nand.ecc.strength = 4;
diff --git a/drivers/mtd/nand/raw/cs553x_nand.c b/drivers/mtd/nand/raw/cs553x_nand.c
index 9472bf798ed5..b7f3f6347761 100644
--- a/drivers/mtd/nand/raw/cs553x_nand.c
+++ b/drivers/mtd/nand/raw/cs553x_nand.c
@@ -286,7 +286,7 @@ static int __init cs553x_init_one(int cs, int mmio, unsigned long adr)
 		goto out_mtd;
 	}
 
-	this->ecc.mode = NAND_ECC_HW;
+	this->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
 	this->ecc.size = 256;
 	this->ecc.bytes = 3;
 	this->ecc.hwctl  = cs_enable_hwecc;
diff --git a/drivers/mtd/nand/raw/davinci_nand.c b/drivers/mtd/nand/raw/davinci_nand.c
index d975a62caaa5..427f320fb79b 100644
--- a/drivers/mtd/nand/raw/davinci_nand.c
+++ b/drivers/mtd/nand/raw/davinci_nand.c
@@ -168,7 +168,7 @@ static int nand_davinci_correct_1bit(struct nand_chip *chip, u_char *dat,
 /*
  * 4-bit hardware ECC ... context maintained over entire AEMIF
  *
- * This is a syndrome engine, but we avoid NAND_ECC_HW_SYNDROME
+ * This is a syndrome engine, but we avoid NAND_ECC_PLACEMENT_INTERLEAVED
  * since that forces use of a problematic "infix OOB" layout.
  * Among other things, it trashes manufacturer bad block markers.
  * Also, and specific to this hardware, it ECC-protects the "prepad"
@@ -530,11 +530,11 @@ static struct davinci_nand_pdata
 		if (!of_property_read_string(pdev->dev.of_node,
 			"ti,davinci-ecc-mode", &mode)) {
 			if (!strncmp("none", mode, 4))
-				pdata->ecc_mode = NAND_ECC_NONE;
+				pdata->engine_type = NAND_ECC_ENGINE_TYPE_NONE;
 			if (!strncmp("soft", mode, 4))
-				pdata->ecc_mode = NAND_ECC_SOFT;
+				pdata->engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
 			if (!strncmp("hw", mode, 2))
-				pdata->ecc_mode = NAND_ECC_HW;
+				pdata->engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
 		}
 		if (!of_property_read_u32(pdev->dev.of_node,
 			"ti,davinci-ecc-bits", &prop))
@@ -585,21 +585,21 @@ static int davinci_nand_attach_chip(struct nand_chip *chip)
 	if (IS_ERR(pdata))
 		return PTR_ERR(pdata);
 
-	switch (info->chip.ecc.mode) {
-	case NAND_ECC_NONE:
+	switch (info->chip.ecc.engine_type) {
+	case NAND_ECC_ENGINE_TYPE_NONE:
 		pdata->ecc_bits = 0;
 		break;
-	case NAND_ECC_SOFT:
+	case NAND_ECC_ENGINE_TYPE_SOFT:
 		pdata->ecc_bits = 0;
 		/*
-		 * This driver expects Hamming based ECC when ecc_mode is set
-		 * to NAND_ECC_SOFT. Force ecc.algo to NAND_ECC_HAMMING to
-		 * avoid adding an extra ->ecc_algo field to
-		 * davinci_nand_pdata.
+		 * This driver expects Hamming based ECC when engine_type is set
+		 * to NAND_ECC_ENGINE_TYPE_SOFT. Force ecc.algo to
+		 * NAND_ECC_ALGO_HAMMING to avoid adding an extra ->ecc_algo
+		 * field to davinci_nand_pdata.
 		 */
-		info->chip.ecc.algo = NAND_ECC_HAMMING;
+		info->chip.ecc.algo = NAND_ECC_ALGO_HAMMING;
 		break;
-	case NAND_ECC_HW:
+	case NAND_ECC_ENGINE_TYPE_ON_HOST:
 		if (pdata->ecc_bits == 4) {
 			int chunks = mtd->writesize / 512;
 
@@ -629,7 +629,7 @@ static int davinci_nand_attach_chip(struct nand_chip *chip)
 			info->chip.ecc.hwctl = nand_davinci_hwctl_4bit;
 			info->chip.ecc.bytes = 10;
 			info->chip.ecc.options = NAND_ECC_GENERIC_ERASED_CHECK;
-			info->chip.ecc.algo = NAND_ECC_BCH;
+			info->chip.ecc.algo = NAND_ECC_ALGO_BCH;
 
 			/*
 			 * Update ECC layout if needed ... for 1-bit HW ECC, the
@@ -645,7 +645,8 @@ static int davinci_nand_attach_chip(struct nand_chip *chip)
 				mtd_set_ooblayout(mtd,
 						  &hwecc4_small_ooblayout_ops);
 			} else if (chunks == 4 || chunks == 8) {
-				mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
+				mtd_set_ooblayout(mtd,
+						  nand_get_large_page_ooblayout());
 				info->chip.ecc.read_page = nand_davinci_read_page_hwecc_oob_first;
 			} else {
 				return -EIO;
@@ -656,7 +657,7 @@ static int davinci_nand_attach_chip(struct nand_chip *chip)
 			info->chip.ecc.correct = nand_davinci_correct_1bit;
 			info->chip.ecc.hwctl = nand_davinci_hwctl_1bit;
 			info->chip.ecc.bytes = 3;
-			info->chip.ecc.algo = NAND_ECC_HAMMING;
+			info->chip.ecc.algo = NAND_ECC_ALGO_HAMMING;
 		}
 		info->chip.ecc.size = 512;
 		info->chip.ecc.strength = pdata->ecc_bits;
@@ -850,7 +851,8 @@ static int nand_davinci_probe(struct platform_device *pdev)
 	info->mask_cle		= pdata->mask_cle ? : MASK_CLE;
 
 	/* Use board-specific ECC config */
-	info->chip.ecc.mode	= pdata->ecc_mode;
+	info->chip.ecc.engine_type = pdata->engine_type;
+	info->chip.ecc.placement = pdata->ecc_placement;
 
 	spin_lock_irq(&davinci_nand_lock);
 
@@ -897,7 +899,7 @@ static int nand_davinci_remove(struct platform_device *pdev)
 	int ret;
 
 	spin_lock_irq(&davinci_nand_lock);
-	if (info->chip.ecc.mode == NAND_ECC_HW_SYNDROME)
+	if (info->chip.ecc.placement == NAND_ECC_PLACEMENT_INTERLEAVED)
 		ecc4_busy = false;
 	spin_unlock_irq(&davinci_nand_lock);
 
diff --git a/drivers/mtd/nand/raw/denali.c b/drivers/mtd/nand/raw/denali.c
index 9d99dade95ce..fa2439cb4daa 100644
--- a/drivers/mtd/nand/raw/denali.c
+++ b/drivers/mtd/nand/raw/denali.c
@@ -1237,7 +1237,8 @@ int denali_chip_init(struct denali_controller *denali,
 	chip->bbt_options |= NAND_BBT_USE_FLASH;
 	chip->bbt_options |= NAND_BBT_NO_OOB;
 	chip->options |= NAND_NO_SUBPAGE_WRITE;
-	chip->ecc.mode = NAND_ECC_HW_SYNDROME;
+	chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
+	chip->ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
 	chip->ecc.read_page = denali_read_page;
 	chip->ecc.write_page = denali_write_page;
 	chip->ecc.read_page_raw = denali_read_page_raw;
diff --git a/drivers/mtd/nand/raw/denali_pci.c b/drivers/mtd/nand/raw/denali_pci.c
index 2f77ee55e1bf..20c085a30adc 100644
--- a/drivers/mtd/nand/raw/denali_pci.c
+++ b/drivers/mtd/nand/raw/denali_pci.c
@@ -100,7 +100,7 @@ static int denali_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 		goto out_remove_denali;
 	}
 
-	dchip->chip.ecc.options |= NAND_ECC_MAXIMIZE;
+	dchip->chip.base.ecc.user_conf.flags |= NAND_ECC_MAXIMIZE_STRENGTH;
 
 	dchip->nsels = nsels;
 
diff --git a/drivers/mtd/nand/raw/diskonchip.c b/drivers/mtd/nand/raw/diskonchip.c
index 43721863a0d8..94432a453e5e 100644
--- a/drivers/mtd/nand/raw/diskonchip.c
+++ b/drivers/mtd/nand/raw/diskonchip.c
@@ -1456,7 +1456,8 @@ static int __init doc_probe(unsigned long physadr)
 	nand->ecc.calculate	= doc200x_calculate_ecc;
 	nand->ecc.correct	= doc200x_correct_data;
 
-	nand->ecc.mode		= NAND_ECC_HW_SYNDROME;
+	nand->ecc.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST;
+	nand->ecc.placement	= NAND_ECC_PLACEMENT_INTERLEAVED;
 	nand->ecc.size		= 512;
 	nand->ecc.bytes		= 6;
 	nand->ecc.strength	= 2;
diff --git a/drivers/mtd/nand/raw/fsl_elbc_nand.c b/drivers/mtd/nand/raw/fsl_elbc_nand.c
index 088692b2e27a..b2af7f81fdf8 100644
--- a/drivers/mtd/nand/raw/fsl_elbc_nand.c
+++ b/drivers/mtd/nand/raw/fsl_elbc_nand.c
@@ -244,7 +244,7 @@ static int fsl_elbc_run_command(struct mtd_info *mtd)
 		return -EIO;
 	}
 
-	if (chip->ecc.mode != NAND_ECC_HW)
+	if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
 		return 0;
 
 	elbc_fcm_ctrl->max_bitflips = 0;
@@ -727,12 +727,12 @@ static int fsl_elbc_attach_chip(struct nand_chip *chip)
 	struct fsl_lbc_regs __iomem *lbc = ctrl->regs;
 	unsigned int al;
 
-	switch (chip->ecc.mode) {
+	switch (chip->ecc.engine_type) {
 	/*
 	 * if ECC was not chosen in DT, decide whether to use HW or SW ECC from
 	 * CS Base Register
 	 */
-	case NAND_ECC_NONE:
+	case NAND_ECC_ENGINE_TYPE_NONE:
 		/* If CS Base Register selects full hardware ECC then use it */
 		if ((in_be32(&lbc->bank[priv->bank].br) & BR_DECC) ==
 		    BR_DECC_CHK_GEN) {
@@ -740,23 +740,23 @@ static int fsl_elbc_attach_chip(struct nand_chip *chip)
 			chip->ecc.write_page = fsl_elbc_write_page;
 			chip->ecc.write_subpage = fsl_elbc_write_subpage;
 
-			chip->ecc.mode = NAND_ECC_HW;
+			chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
 			mtd_set_ooblayout(mtd, &fsl_elbc_ooblayout_ops);
 			chip->ecc.size = 512;
 			chip->ecc.bytes = 3;
 			chip->ecc.strength = 1;
 		} else {
 			/* otherwise fall back to default software ECC */
-			chip->ecc.mode = NAND_ECC_SOFT;
-			chip->ecc.algo = NAND_ECC_HAMMING;
+			chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
+			chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
 		}
 		break;
 
 	/* if SW ECC was chosen in DT, we do not need to set anything here */
-	case NAND_ECC_SOFT:
+	case NAND_ECC_ENGINE_TYPE_SOFT:
 		break;
 
-	/* should we also implement NAND_ECC_HW to do as the code above? */
+	/* should we also implement *_ECC_ENGINE_CONTROLLER to do as above? */
 	default:
 		return -EINVAL;
 	}
@@ -786,8 +786,8 @@ static int fsl_elbc_attach_chip(struct nand_chip *chip)
 	        chip->page_shift);
 	dev_dbg(priv->dev, "fsl_elbc_init: nand->phys_erase_shift = %d\n",
 	        chip->phys_erase_shift);
-	dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.mode = %d\n",
-	        chip->ecc.mode);
+	dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.engine_type = %d\n",
+		chip->ecc.engine_type);
 	dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.steps = %d\n",
 	        chip->ecc.steps);
 	dev_dbg(priv->dev, "fsl_elbc_init: nand->ecc.bytes = %d\n",
diff --git a/drivers/mtd/nand/raw/fsl_ifc_nand.c b/drivers/mtd/nand/raw/fsl_ifc_nand.c
index 00ae7a910b03..0e7a9b64301e 100644
--- a/drivers/mtd/nand/raw/fsl_ifc_nand.c
+++ b/drivers/mtd/nand/raw/fsl_ifc_nand.c
@@ -309,7 +309,7 @@ static void fsl_ifc_cmdfunc(struct nand_chip *chip, unsigned int command,
 		ifc_nand_ctrl->read_bytes = mtd->writesize + mtd->oobsize;
 		ifc_nand_ctrl->index += column;
 
-		if (chip->ecc.mode == NAND_ECC_HW)
+		if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST)
 			ifc_nand_ctrl->eccread = 1;
 
 		fsl_ifc_do_read(chip, 0, mtd);
@@ -724,8 +724,8 @@ static int fsl_ifc_attach_chip(struct nand_chip *chip)
 							chip->page_shift);
 	dev_dbg(priv->dev, "%s: nand->phys_erase_shift = %d\n", __func__,
 							chip->phys_erase_shift);
-	dev_dbg(priv->dev, "%s: nand->ecc.mode = %d\n", __func__,
-							chip->ecc.mode);
+	dev_dbg(priv->dev, "%s: nand->ecc.engine_type = %d\n", __func__,
+							chip->ecc.engine_type);
 	dev_dbg(priv->dev, "%s: nand->ecc.steps = %d\n", __func__,
 							chip->ecc.steps);
 	dev_dbg(priv->dev, "%s: nand->ecc.bytes = %d\n", __func__,
@@ -912,7 +912,7 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
 
 	/* Must also set CSOR_NAND_ECC_ENC_EN if DEC_EN set */
 	if (csor & CSOR_NAND_ECC_DEC_EN) {
-		chip->ecc.mode = NAND_ECC_HW;
+		chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
 		mtd_set_ooblayout(mtd, &fsl_ifc_ooblayout_ops);
 
 		/* Hardware generates ECC per 512 Bytes */
@@ -925,8 +925,8 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv)
 			chip->ecc.strength = 8;
 		}
 	} else {
-		chip->ecc.mode = NAND_ECC_SOFT;
-		chip->ecc.algo = NAND_ECC_HAMMING;
+		chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
+		chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
 	}
 
 	ret = fsl_ifc_sram_init(priv);
diff --git a/drivers/mtd/nand/raw/fsl_upm.c b/drivers/mtd/nand/raw/fsl_upm.c
index 197850aeb261..d5813b9abc8e 100644
--- a/drivers/mtd/nand/raw/fsl_upm.c
+++ b/drivers/mtd/nand/raw/fsl_upm.c
@@ -47,8 +47,8 @@ static int fun_chip_init(struct fsl_upm_nand *fun,
 	int ret;
 	struct device_node *flash_np;
 
-	fun->chip.ecc.mode = NAND_ECC_SOFT;
-	fun->chip.ecc.algo = NAND_ECC_HAMMING;
+	fun->chip.ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
+	fun->chip.ecc.algo = NAND_ECC_ALGO_HAMMING;
 	fun->chip.controller = &fun->base;
 	mtd->dev.parent = fun->dev;
 
diff --git a/drivers/mtd/nand/raw/fsmc_nand.c b/drivers/mtd/nand/raw/fsmc_nand.c
index 92ddc41d0ff0..4191831df182 100644
--- a/drivers/mtd/nand/raw/fsmc_nand.c
+++ b/drivers/mtd/nand/raw/fsmc_nand.c
@@ -900,8 +900,8 @@ static int fsmc_nand_attach_chip(struct nand_chip *nand)
 		return 0;
 	}
 
-	switch (nand->ecc.mode) {
-	case NAND_ECC_HW:
+	switch (nand->ecc.engine_type) {
+	case NAND_ECC_ENGINE_TYPE_ON_HOST:
 		dev_info(host->dev, "Using 1-bit HW ECC scheme\n");
 		nand->ecc.calculate = fsmc_read_hwecc_ecc1;
 		nand->ecc.correct = nand_correct_data;
@@ -910,14 +910,14 @@ static int fsmc_nand_attach_chip(struct nand_chip *nand)
 		nand->ecc.options |= NAND_ECC_SOFT_HAMMING_SM_ORDER;
 		break;
 
-	case NAND_ECC_SOFT:
-		if (nand->ecc.algo == NAND_ECC_BCH) {
+	case NAND_ECC_ENGINE_TYPE_SOFT:
+		if (nand->ecc.algo == NAND_ECC_ALGO_BCH) {
 			dev_info(host->dev,
 				 "Using 4-bit SW BCH ECC scheme\n");
 			break;
 		}
 
-	case NAND_ECC_ON_DIE:
+	case NAND_ECC_ENGINE_TYPE_ON_DIE:
 		break;
 
 	default:
@@ -929,7 +929,7 @@ static int fsmc_nand_attach_chip(struct nand_chip *nand)
 	 * Don't set layout for BCH4 SW ECC. This will be
 	 * generated later in nand_bch_init() later.
 	 */
-	if (nand->ecc.mode == NAND_ECC_HW) {
+	if (nand->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST) {
 		switch (mtd->oobsize) {
 		case 16:
 		case 64:
@@ -1059,7 +1059,7 @@ static int __init fsmc_nand_probe(struct platform_device *pdev)
 	 * Setup default ECC mode. nand_dt_init() called from nand_scan_ident()
 	 * can overwrite this value if the DT provides a different value.
 	 */
-	nand->ecc.mode = NAND_ECC_HW;
+	nand->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
 	nand->ecc.hwctl = fsmc_enable_hwecc;
 	nand->ecc.size = 512;
 	nand->badblockbits = 7;
diff --git a/drivers/mtd/nand/raw/gpio.c b/drivers/mtd/nand/raw/gpio.c
index 3bd847ccc3f3..4ec0a1e10867 100644
--- a/drivers/mtd/nand/raw/gpio.c
+++ b/drivers/mtd/nand/raw/gpio.c
@@ -342,8 +342,8 @@ static int gpio_nand_probe(struct platform_device *pdev)
 	gpiomtd->base.ops = &gpio_nand_ops;
 
 	nand_set_flash_node(chip, pdev->dev.of_node);
-	chip->ecc.mode		= NAND_ECC_SOFT;
-	chip->ecc.algo		= NAND_ECC_HAMMING;
+	chip->ecc.engine_type	= NAND_ECC_ENGINE_TYPE_SOFT;
+	chip->ecc.algo		= NAND_ECC_ALGO_HAMMING;
 	chip->options		= gpiomtd->plat.options;
 	chip->controller	= &gpiomtd->base;
 
diff --git a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
index 5d4aee46cc55..dc8104e67506 100644
--- a/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
+++ b/drivers/mtd/nand/raw/gpmi-nand/gpmi-nand.c
@@ -272,8 +272,8 @@ static int set_geometry_by_ecc_info(struct gpmi_nand_data *this,
 	default:
 		dev_err(this->dev,
 			"unsupported nand chip. ecc bits : %d, ecc size : %d\n",
-			chip->base.eccreq.strength,
-			chip->base.eccreq.step_size);
+			nanddev_get_ecc_requirements(&chip->base)->strength,
+			nanddev_get_ecc_requirements(&chip->base)->step_size);
 		return -EINVAL;
 	}
 	geo->ecc_chunk_size = ecc_step;
@@ -510,6 +510,8 @@ static int legacy_set_geometry(struct gpmi_nand_data *this)
 static int common_nfc_set_geometry(struct gpmi_nand_data *this)
 {
 	struct nand_chip *chip = &this->nand;
+	const struct nand_ecc_props *requirements =
+		nanddev_get_ecc_requirements(&chip->base);
 
 	if (chip->ecc.strength > 0 && chip->ecc.size > 0)
 		return set_geometry_by_ecc_info(this, chip->ecc.strength,
@@ -517,13 +519,12 @@ static int common_nfc_set_geometry(struct gpmi_nand_data *this)
 
 	if ((of_property_read_bool(this->dev->of_node, "fsl,use-minimum-ecc"))
 				|| legacy_set_geometry(this)) {
-		if (!(chip->base.eccreq.strength > 0 &&
-		      chip->base.eccreq.step_size > 0))
+		if (!(requirements->strength > 0 && requirements->step_size > 0))
 			return -EINVAL;
 
 		return set_geometry_by_ecc_info(this,
-						chip->base.eccreq.strength,
-						chip->base.eccreq.step_size);
+						requirements->strength,
+						requirements->step_size);
 	}
 
 	return 0;
@@ -1003,10 +1004,8 @@ static int acquire_dma_channels(struct gpmi_nand_data *this)
 	/* request dma channel */
 	dma_chan = dma_request_chan(&pdev->dev, "rx-tx");
 	if (IS_ERR(dma_chan)) {
-		ret = PTR_ERR(dma_chan);
-		if (ret != -EPROBE_DEFER)
-			dev_err(this->dev, "DMA channel request failed: %d\n",
-				ret);
+		ret = dev_err_probe(this->dev, PTR_ERR(dma_chan),
+				    "DMA channel request failed\n");
 		release_dma_channels(this);
 	} else {
 		this->dma_chans[0] = dma_chan;
@@ -2032,7 +2031,7 @@ static int gpmi_init_last(struct gpmi_nand_data *this)
 	ecc->write_page_raw = gpmi_ecc_write_page_raw;
 	ecc->read_oob_raw = gpmi_ecc_read_oob_raw;
 	ecc->write_oob_raw = gpmi_ecc_write_oob_raw;
-	ecc->mode	= NAND_ECC_HW;
+	ecc->engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
 	ecc->size	= bch_geo->ecc_chunk_size;
 	ecc->strength	= bch_geo->ecc_strength;
 	mtd_set_ooblayout(mtd, &gpmi_ooblayout_ops);
diff --git a/drivers/mtd/nand/raw/hisi504_nand.c b/drivers/mtd/nand/raw/hisi504_nand.c
index b84238e2268a..8b2122ce6ec3 100644
--- a/drivers/mtd/nand/raw/hisi504_nand.c
+++ b/drivers/mtd/nand/raw/hisi504_nand.c
@@ -186,7 +186,7 @@ static void hisi_nfc_dma_transfer(struct hinfc_host *host, int todev)
 	hinfc_write(host, host->dma_buffer, HINFC504_DMA_ADDR_DATA);
 	hinfc_write(host, host->dma_oob, HINFC504_DMA_ADDR_OOB);
 
-	if (chip->ecc.mode == NAND_ECC_NONE) {
+	if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_NONE) {
 		hinfc_write(host, ((mtd->oobsize & HINFC504_DMA_LEN_OOB_MASK)
 			<< HINFC504_DMA_LEN_OOB_SHIFT), HINFC504_DMA_LEN);
 
@@ -468,7 +468,7 @@ static void hisi_nfc_cmdfunc(struct nand_chip *chip, unsigned command,
 
 	case NAND_CMD_STATUS:
 		flag = hinfc_read(host, HINFC504_CON);
-		if (chip->ecc.mode == NAND_ECC_HW)
+		if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST)
 			hinfc_write(host,
 				    flag & ~(HINFC504_CON_ECCTYPE_MASK <<
 				    HINFC504_CON_ECCTYPE_SHIFT), HINFC504_CON);
@@ -721,7 +721,7 @@ static int hisi_nfc_attach_chip(struct nand_chip *chip)
 	}
 	hinfc_write(host, flag, HINFC504_CON);
 
-	if (chip->ecc.mode == NAND_ECC_HW)
+	if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST)
 		hisi_nfc_ecc_probe(host);
 
 	return 0;
diff --git a/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c b/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
index 69423bb29adb..0e9d426fe4f2 100644
--- a/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
+++ b/drivers/mtd/nand/raw/ingenic/ingenic_nand_drv.c
@@ -194,8 +194,8 @@ static int ingenic_nand_attach_chip(struct nand_chip *chip)
 				  (chip->ecc.strength / 8);
 	}
 
-	switch (chip->ecc.mode) {
-	case NAND_ECC_HW:
+	switch (chip->ecc.engine_type) {
+	case NAND_ECC_ENGINE_TYPE_ON_HOST:
 		if (!nfc->ecc) {
 			dev_err(nfc->dev, "HW ECC selected, but ECC controller not found\n");
 			return -ENODEV;
@@ -205,22 +205,22 @@ static int ingenic_nand_attach_chip(struct nand_chip *chip)
 		chip->ecc.calculate = ingenic_nand_ecc_calculate;
 		chip->ecc.correct = ingenic_nand_ecc_correct;
 		fallthrough;
-	case NAND_ECC_SOFT:
+	case NAND_ECC_ENGINE_TYPE_SOFT:
 		dev_info(nfc->dev, "using %s (strength %d, size %d, bytes %d)\n",
 			 (nfc->ecc) ? "hardware ECC" : "software ECC",
 			 chip->ecc.strength, chip->ecc.size, chip->ecc.bytes);
 		break;
-	case NAND_ECC_NONE:
+	case NAND_ECC_ENGINE_TYPE_NONE:
 		dev_info(nfc->dev, "not using ECC\n");
 		break;
 	default:
 		dev_err(nfc->dev, "ECC mode %d not supported\n",
-			chip->ecc.mode);
+			chip->ecc.engine_type);
 		return -EINVAL;
 	}
 
 	/* The NAND core will generate the ECC layout for SW ECC */
-	if (chip->ecc.mode != NAND_ECC_HW)
+	if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
 		return 0;
 
 	/* Generate ECC layout. ECC codes are right aligned in the OOB area. */
@@ -243,8 +243,10 @@ static int ingenic_nand_attach_chip(struct nand_chip *chip)
 	/* For legacy reasons we use a different layout on the qi,lb60 board. */
 	if (of_machine_is_compatible("qi,lb60"))
 		mtd_set_ooblayout(mtd, &qi_lb60_ooblayout_ops);
-	else
+	else if (nfc->soc_info->oob_layout)
 		mtd_set_ooblayout(mtd, nfc->soc_info->oob_layout);
+	else
+		mtd_set_ooblayout(mtd, nand_get_large_page_ooblayout());
 
 	return 0;
 }
@@ -404,7 +406,7 @@ static int ingenic_nand_init_chip(struct platform_device *pdev,
 	mtd->dev.parent = dev;
 
 	chip->options = NAND_NO_SUBPAGE_WRITE;
-	chip->ecc.mode = NAND_ECC_HW;
+	chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
 	chip->controller = &nfc->controller;
 	nand_set_flash_node(chip, np);
 
@@ -532,7 +534,6 @@ static const struct jz_soc_info jz4740_soc_info = {
 	.data_offset = 0x00000000,
 	.cmd_offset = 0x00008000,
 	.addr_offset = 0x00010000,
-	.oob_layout = &nand_ooblayout_lp_ops,
 };
 
 static const struct jz_soc_info jz4725b_soc_info = {
@@ -546,7 +547,6 @@ static const struct jz_soc_info jz4780_soc_info = {
 	.data_offset = 0x00000000,
 	.cmd_offset = 0x00400000,
 	.addr_offset = 0x00800000,
-	.oob_layout = &nand_ooblayout_lp_ops,
 };
 
 static const struct of_device_id ingenic_nand_dt_match[] = {
diff --git a/drivers/mtd/nand/raw/lpc32xx_mlc.c b/drivers/mtd/nand/raw/lpc32xx_mlc.c
index 7521038af2ef..4940bb2e3c07 100644
--- a/drivers/mtd/nand/raw/lpc32xx_mlc.c
+++ b/drivers/mtd/nand/raw/lpc32xx_mlc.c
@@ -656,7 +656,7 @@ static int lpc32xx_nand_attach_chip(struct nand_chip *chip)
 	if (!host->dummy_buf)
 		return -ENOMEM;
 
-	chip->ecc.mode = NAND_ECC_HW;
+	chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
 	chip->ecc.size = 512;
 	mtd_set_ooblayout(mtd, &lpc32xx_ooblayout_ops);
 	host->mlcsubpages = mtd->writesize / 512;
diff --git a/drivers/mtd/nand/raw/lpc32xx_slc.c b/drivers/mtd/nand/raw/lpc32xx_slc.c
index b151fd000815..6db9d2ed6881 100644
--- a/drivers/mtd/nand/raw/lpc32xx_slc.c
+++ b/drivers/mtd/nand/raw/lpc32xx_slc.c
@@ -881,7 +881,8 @@ static int lpc32xx_nand_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, host);
 
 	/* NAND callbacks for LPC32xx SLC hardware */
-	chip->ecc.mode = NAND_ECC_HW_SYNDROME;
+	chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
+	chip->ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
 	chip->legacy.read_byte = lpc32xx_nand_read_byte;
 	chip->legacy.read_buf = lpc32xx_nand_read_buf;
 	chip->legacy.write_buf = lpc32xx_nand_write_buf;
diff --git a/drivers/mtd/nand/raw/marvell_nand.c b/drivers/mtd/nand/raw/marvell_nand.c
index 8482d3bd8b1f..f5ca2002d08e 100644
--- a/drivers/mtd/nand/raw/marvell_nand.c
+++ b/drivers/mtd/nand/raw/marvell_nand.c
@@ -227,6 +227,8 @@
 #define XTYPE_MASK		7
 
 /**
+ * struct marvell_hw_ecc_layout - layout of Marvell ECC
+ *
  * Marvell ECC engine works differently than the others, in order to limit the
  * size of the IP, hardware engineers chose to set a fixed strength at 16 bits
  * per subpage, and depending on a the desired strength needed by the NAND chip,
@@ -292,6 +294,8 @@ static const struct marvell_hw_ecc_layout marvell_nfc_layouts[] = {
 };
 
 /**
+ * struct marvell_nand_chip_sel - CS line description
+ *
  * The Nand Flash Controller has up to 4 CE and 2 RB pins. The CE selection
  * is made by a field in NDCB0 register, and in another field in NDCB2 register.
  * The datasheet describes the logic with an error: ADDR5 field is once
@@ -312,14 +316,15 @@ struct marvell_nand_chip_sel {
 };
 
 /**
- * NAND chip structure: stores NAND chip device related information
+ * struct marvell_nand_chip - stores NAND chip device related information
  *
  * @chip:		Base NAND chip structure
  * @node:		Used to store NAND chips into a list
- * @layout		NAND layout when using hardware ECC
+ * @layout:		NAND layout when using hardware ECC
  * @ndcr:		Controller register value for this NAND chip
  * @ndtr0:		Timing registers 0 value for this NAND chip
  * @ndtr1:		Timing registers 1 value for this NAND chip
+ * @addr_cyc:		Amount of cycles needed to pass column address
  * @selected_die:	Current active CS
  * @nsels:		Number of CS lines required by the NAND chip
  * @sels:		Array of CS lines descriptions
@@ -349,7 +354,8 @@ static inline struct marvell_nand_chip_sel *to_nand_sel(struct marvell_nand_chip
 }
 
 /**
- * NAND controller capabilities for distinction between compatible strings
+ * struct marvell_nfc_caps - NAND controller capabilities for distinction
+ *                           between compatible strings
  *
  * @max_cs_nb:		Number of Chip Select lines available
  * @max_rb_nb:		Number of Ready/Busy lines available
@@ -372,7 +378,7 @@ struct marvell_nfc_caps {
 };
 
 /**
- * NAND controller structure: stores Marvell NAND controller information
+ * struct marvell_nfc - stores Marvell NAND controller information
  *
  * @controller:		Base controller structure
  * @dev:		Parent device (used to print error messages)
@@ -383,7 +389,9 @@ struct marvell_nfc_caps {
  * @assigned_cs:	Bitmask describing already assigned CS lines
  * @chips:		List containing all the NAND chips attached to
  *			this NAND controller
+ * @selected_chip:	Currently selected target chip
  * @caps:		NAND controller capabilities for each compatible string
+ * @use_dma:		Whetner DMA is used
  * @dma_chan:		DMA channel (NFCv1 only)
  * @dma_buf:		32-bit aligned buffer for DMA transfers (NFCv1 only)
  */
@@ -411,7 +419,8 @@ static inline struct marvell_nfc *to_marvell_nfc(struct nand_controller *ctrl)
 }
 
 /**
- * NAND controller timings expressed in NAND Controller clock cycles
+ * struct marvell_nfc_timings - NAND controller timings expressed in NAND
+ *                              Controller clock cycles
  *
  * @tRP:		ND_nRE pulse width
  * @tRH:		ND_nRE high duration
@@ -455,8 +464,8 @@ struct marvell_nfc_timings {
 						     period_ns))
 
 /**
- * NAND driver structure filled during the parsing of the ->exec_op() subop
- * subset of instructions.
+ * struct marvell_nfc_op - filled during the parsing of the ->exec_op()
+ *                         subop subset of instructions.
  *
  * @ndcb:		Array of values written to NDCBx registers
  * @cle_ale_delay_ns:	Optional delay after the last CMD or ADDR cycle
@@ -685,9 +694,31 @@ static int marvell_nfc_wait_cmdd(struct nand_chip *chip)
 	return marvell_nfc_end_cmd(chip, cs_flag, "CMDD");
 }
 
+static int marvell_nfc_poll_status(struct marvell_nfc *nfc, u32 mask,
+				   u32 expected_val, unsigned long timeout_ms)
+{
+	unsigned long limit;
+	u32 st;
+
+	limit = jiffies + msecs_to_jiffies(timeout_ms);
+	do {
+		st = readl_relaxed(nfc->regs + NDSR);
+		if (st & NDSR_RDY(1))
+			st |= NDSR_RDY(0);
+
+		if ((st & mask) == expected_val)
+			return 0;
+
+		cpu_relax();
+	} while (time_after(limit, jiffies));
+
+	return -ETIMEDOUT;
+}
+
 static int marvell_nfc_wait_op(struct nand_chip *chip, unsigned int timeout_ms)
 {
 	struct marvell_nfc *nfc = to_marvell_nfc(chip->controller);
+	struct mtd_info *mtd = nand_to_mtd(chip);
 	u32 pending;
 	int ret;
 
@@ -695,12 +726,18 @@ static int marvell_nfc_wait_op(struct nand_chip *chip, unsigned int timeout_ms)
 	if (!timeout_ms)
 		timeout_ms = IRQ_TIMEOUT;
 
-	init_completion(&nfc->complete);
+	if (mtd->oops_panic_write) {
+		ret = marvell_nfc_poll_status(nfc, NDSR_RDY(0),
+					      NDSR_RDY(0),
+					      timeout_ms);
+	} else {
+		init_completion(&nfc->complete);
 
-	marvell_nfc_enable_int(nfc, NDCR_RDYM);
-	ret = wait_for_completion_timeout(&nfc->complete,
-					  msecs_to_jiffies(timeout_ms));
-	marvell_nfc_disable_int(nfc, NDCR_RDYM);
+		marvell_nfc_enable_int(nfc, NDCR_RDYM);
+		ret = wait_for_completion_timeout(&nfc->complete,
+						  msecs_to_jiffies(timeout_ms));
+		marvell_nfc_disable_int(nfc, NDCR_RDYM);
+	}
 	pending = marvell_nfc_clear_int(nfc, NDSR_RDY(0) | NDSR_RDY(1));
 
 	/*
@@ -780,7 +817,7 @@ static void marvell_nfc_enable_hw_ecc(struct nand_chip *chip)
 		 * When enabling BCH, set threshold to 0 to always know the
 		 * number of corrected bitflips.
 		 */
-		if (chip->ecc.algo == NAND_ECC_BCH)
+		if (chip->ecc.algo == NAND_ECC_ALGO_BCH)
 			writel_relaxed(NDECCCTRL_BCH_EN, nfc->regs + NDECCCTRL);
 	}
 }
@@ -792,7 +829,7 @@ static void marvell_nfc_disable_hw_ecc(struct nand_chip *chip)
 
 	if (ndcr & NDCR_ECC_EN) {
 		writel_relaxed(ndcr & ~NDCR_ECC_EN, nfc->regs + NDCR);
-		if (chip->ecc.algo == NAND_ECC_BCH)
+		if (chip->ecc.algo == NAND_ECC_ALGO_BCH)
 			writel_relaxed(0, nfc->regs + NDECCCTRL);
 	}
 }
@@ -966,7 +1003,7 @@ static int marvell_nfc_hw_ecc_check_bitflips(struct nand_chip *chip,
 	if (ndsr & NDSR_CORERR) {
 		writel_relaxed(ndsr, nfc->regs + NDSR);
 
-		if (chip->ecc.algo == NAND_ECC_BCH)
+		if (chip->ecc.algo == NAND_ECC_ALGO_BCH)
 			bf = NDSR_ERRCNT(ndsr);
 		else
 			bf = 1;
@@ -2218,7 +2255,7 @@ static int marvell_nand_hw_ecc_controller_init(struct mtd_info *mtd,
 	ecc->size = l->data_bytes;
 
 	if (ecc->strength == 1) {
-		chip->ecc.algo = NAND_ECC_HAMMING;
+		chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
 		ecc->read_page_raw = marvell_nfc_hw_ecc_hmg_read_page_raw;
 		ecc->read_page = marvell_nfc_hw_ecc_hmg_read_page;
 		ecc->read_oob_raw = marvell_nfc_hw_ecc_hmg_read_oob_raw;
@@ -2228,7 +2265,7 @@ static int marvell_nand_hw_ecc_controller_init(struct mtd_info *mtd,
 		ecc->write_oob_raw = marvell_nfc_hw_ecc_hmg_write_oob_raw;
 		ecc->write_oob = ecc->write_oob_raw;
 	} else {
-		chip->ecc.algo = NAND_ECC_BCH;
+		chip->ecc.algo = NAND_ECC_ALGO_BCH;
 		ecc->strength = 16;
 		ecc->read_page_raw = marvell_nfc_hw_ecc_bch_read_page_raw;
 		ecc->read_page = marvell_nfc_hw_ecc_bch_read_page;
@@ -2247,13 +2284,16 @@ static int marvell_nand_ecc_init(struct mtd_info *mtd,
 				 struct nand_ecc_ctrl *ecc)
 {
 	struct nand_chip *chip = mtd_to_nand(mtd);
+	const struct nand_ecc_props *requirements =
+		nanddev_get_ecc_requirements(&chip->base);
 	struct marvell_nfc *nfc = to_marvell_nfc(chip->controller);
 	int ret;
 
-	if (ecc->mode != NAND_ECC_NONE && (!ecc->size || !ecc->strength)) {
-		if (chip->base.eccreq.step_size && chip->base.eccreq.strength) {
-			ecc->size = chip->base.eccreq.step_size;
-			ecc->strength = chip->base.eccreq.strength;
+	if (ecc->engine_type != NAND_ECC_ENGINE_TYPE_NONE &&
+	    (!ecc->size || !ecc->strength)) {
+		if (requirements->step_size && requirements->strength) {
+			ecc->size = requirements->step_size;
+			ecc->strength = requirements->strength;
 		} else {
 			dev_info(nfc->dev,
 				 "No minimum ECC strength, using 1b/512B\n");
@@ -2262,15 +2302,15 @@ static int marvell_nand_ecc_init(struct mtd_info *mtd,
 		}
 	}
 
-	switch (ecc->mode) {
-	case NAND_ECC_HW:
+	switch (ecc->engine_type) {
+	case NAND_ECC_ENGINE_TYPE_ON_HOST:
 		ret = marvell_nand_hw_ecc_controller_init(mtd, ecc);
 		if (ret)
 			return ret;
 		break;
-	case NAND_ECC_NONE:
-	case NAND_ECC_SOFT:
-	case NAND_ECC_ON_DIE:
+	case NAND_ECC_ENGINE_TYPE_NONE:
+	case NAND_ECC_ENGINE_TYPE_SOFT:
+	case NAND_ECC_ENGINE_TYPE_ON_DIE:
 		if (!nfc->caps->is_nfcv2 && mtd->writesize != SZ_512 &&
 		    mtd->writesize != SZ_2K) {
 			dev_err(nfc->dev, "NFCv1 cannot write %d bytes pages\n",
@@ -2467,7 +2507,7 @@ static int marvell_nand_attach_chip(struct nand_chip *chip)
 		return ret;
 	}
 
-	if (chip->ecc.mode == NAND_ECC_HW) {
+	if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST) {
 		/*
 		 * Subpage write not available with hardware ECC, prohibit also
 		 * subpage read as in userspace subpage access would still be
@@ -2642,7 +2682,7 @@ static int marvell_nand_chip_init(struct device *dev, struct marvell_nfc *nfc,
 	 * Default to HW ECC engine mode. If the nand-ecc-mode property is given
 	 * in the DT node, this entry will be overwritten in nand_scan_ident().
 	 */
-	chip->ecc.mode = NAND_ECC_HW;
+	chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
 
 	/*
 	 * Save a reference value for timing registers before
@@ -2759,10 +2799,7 @@ static int marvell_nfc_init_dma(struct marvell_nfc *nfc)
 	if (IS_ERR(nfc->dma_chan)) {
 		ret = PTR_ERR(nfc->dma_chan);
 		nfc->dma_chan = NULL;
-		if (ret != -EPROBE_DEFER)
-			dev_err(nfc->dev, "DMA channel request failed: %d\n",
-				ret);
-		return ret;
+		return dev_err_probe(nfc->dev, ret, "DMA channel request failed\n");
 	}
 
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
diff --git a/drivers/mtd/nand/raw/meson_nand.c b/drivers/mtd/nand/raw/meson_nand.c
index 0e5829a2b54f..48e6dac96be6 100644
--- a/drivers/mtd/nand/raw/meson_nand.c
+++ b/drivers/mtd/nand/raw/meson_nand.c
@@ -1197,7 +1197,7 @@ static int meson_nand_attach_chip(struct nand_chip *nand)
 	if (ret)
 		return -EINVAL;
 
-	nand->ecc.mode = NAND_ECC_HW;
+	nand->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
 	nand->ecc.write_page_raw = meson_nfc_write_page_raw;
 	nand->ecc.write_page = meson_nfc_write_page_hwecc;
 	nand->ecc.write_oob_raw = nand_write_oob_std;
diff --git a/drivers/mtd/nand/raw/mpc5121_nfc.c b/drivers/mtd/nand/raw/mpc5121_nfc.c
index 18ecb096a32d..dfd0d3ed5ed0 100644
--- a/drivers/mtd/nand/raw/mpc5121_nfc.c
+++ b/drivers/mtd/nand/raw/mpc5121_nfc.c
@@ -688,8 +688,8 @@ static int mpc5121_nfc_probe(struct platform_device *op)
 	chip->legacy.set_features = nand_get_set_features_notsupp;
 	chip->legacy.get_features = nand_get_set_features_notsupp;
 	chip->bbt_options = NAND_BBT_USE_FLASH;
-	chip->ecc.mode = NAND_ECC_SOFT;
-	chip->ecc.algo = NAND_ECC_HAMMING;
+	chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
+	chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
 
 	/* Support external chip-select logic on ADS5121 board */
 	if (of_machine_is_compatible("fsl,mpc5121ads")) {
diff --git a/drivers/mtd/nand/raw/mtk_nand.c b/drivers/mtd/nand/raw/mtk_nand.c
index ad1b55dab211..57f1f1708994 100644
--- a/drivers/mtd/nand/raw/mtk_nand.c
+++ b/drivers/mtd/nand/raw/mtk_nand.c
@@ -1253,21 +1253,23 @@ static int mtk_nfc_set_spare_per_sector(u32 *sps, struct mtd_info *mtd)
 static int mtk_nfc_ecc_init(struct device *dev, struct mtd_info *mtd)
 {
 	struct nand_chip *nand = mtd_to_nand(mtd);
+	const struct nand_ecc_props *requirements =
+		nanddev_get_ecc_requirements(&nand->base);
 	struct mtk_nfc *nfc = nand_get_controller_data(nand);
 	u32 spare;
 	int free, ret;
 
 	/* support only ecc hw mode */
-	if (nand->ecc.mode != NAND_ECC_HW) {
-		dev_err(dev, "ecc.mode not supported\n");
+	if (nand->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST) {
+		dev_err(dev, "ecc.engine_type not supported\n");
 		return -EINVAL;
 	}
 
 	/* if optional dt settings not present */
 	if (!nand->ecc.size || !nand->ecc.strength) {
 		/* use datasheet requirements */
-		nand->ecc.strength = nand->base.eccreq.strength;
-		nand->ecc.size = nand->base.eccreq.step_size;
+		nand->ecc.strength = requirements->strength;
+		nand->ecc.size = requirements->step_size;
 
 		/*
 		 * align eccstrength and eccsize
@@ -1416,7 +1418,7 @@ static int mtk_nfc_nand_chip_init(struct device *dev, struct mtk_nfc *nfc,
 	nand->options |= NAND_USES_DMA | NAND_SUBPAGE_READ;
 
 	/* set default mode in case dt entry is missing */
-	nand->ecc.mode = NAND_ECC_HW;
+	nand->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
 
 	nand->ecc.write_subpage = mtk_nfc_write_subpage_hwecc;
 	nand->ecc.write_page_raw = mtk_nfc_write_page_raw;
diff --git a/drivers/mtd/nand/raw/mxc_nand.c b/drivers/mtd/nand/raw/mxc_nand.c
index a043d76b48cb..d4200eb2ad32 100644
--- a/drivers/mtd/nand/raw/mxc_nand.c
+++ b/drivers/mtd/nand/raw/mxc_nand.c
@@ -669,7 +669,7 @@ static void mxc_nand_enable_hwecc_v1_v2(struct nand_chip *chip, bool enable)
 	struct mxc_nand_host *host = nand_get_controller_data(chip);
 	uint16_t config1;
 
-	if (chip->ecc.mode != NAND_ECC_HW)
+	if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
 		return;
 
 	config1 = readw(NFC_V1_V2_CONFIG1);
@@ -687,7 +687,7 @@ static void mxc_nand_enable_hwecc_v3(struct nand_chip *chip, bool enable)
 	struct mxc_nand_host *host = nand_get_controller_data(chip);
 	uint32_t config2;
 
-	if (chip->ecc.mode != NAND_ECC_HW)
+	if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
 		return;
 
 	config2 = readl(NFC_V3_CONFIG2);
@@ -1117,7 +1117,8 @@ static void preset_v1(struct mtd_info *mtd)
 	struct mxc_nand_host *host = nand_get_controller_data(nand_chip);
 	uint16_t config1 = 0;
 
-	if (nand_chip->ecc.mode == NAND_ECC_HW && mtd->writesize)
+	if (nand_chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST &&
+	    mtd->writesize)
 		config1 |= NFC_V1_V2_CONFIG1_ECC_EN;
 
 	if (!host->devtype_data->irqpending_quirk)
@@ -1227,7 +1228,7 @@ static void preset_v2(struct mtd_info *mtd)
 	if (mtd->writesize) {
 		uint16_t pages_per_block = mtd->erasesize / mtd->writesize;
 
-		if (nand_chip->ecc.mode == NAND_ECC_HW)
+		if (nand_chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST)
 			config1 |= NFC_V1_V2_CONFIG1_ECC_EN;
 
 		host->eccsize = get_eccsize(mtd);
@@ -1303,7 +1304,7 @@ static void preset_v3(struct mtd_info *mtd)
 	}
 
 	if (mtd->writesize) {
-		if (chip->ecc.mode == NAND_ECC_HW)
+		if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST)
 			config2 |= NFC_V3_CONFIG2_ECC_EN;
 
 		config2 |= NFC_V3_CONFIG2_PPB(
@@ -1680,8 +1681,8 @@ static int mxcnd_attach_chip(struct nand_chip *chip)
 	struct mxc_nand_host *host = nand_get_controller_data(chip);
 	struct device *dev = mtd->dev.parent;
 
-	switch (chip->ecc.mode) {
-	case NAND_ECC_HW:
+	switch (chip->ecc.engine_type) {
+	case NAND_ECC_ENGINE_TYPE_ON_HOST:
 		chip->ecc.read_page = mxc_nand_read_page;
 		chip->ecc.read_page_raw = mxc_nand_read_page_raw;
 		chip->ecc.read_oob = mxc_nand_read_oob;
@@ -1690,7 +1691,7 @@ static int mxcnd_attach_chip(struct nand_chip *chip)
 		chip->ecc.write_oob = mxc_nand_write_oob;
 		break;
 
-	case NAND_ECC_SOFT:
+	case NAND_ECC_ENGINE_TYPE_SOFT:
 		break;
 
 	default:
@@ -1728,7 +1729,7 @@ static int mxcnd_attach_chip(struct nand_chip *chip)
 	 */
 	host->used_oobsize = min(mtd->oobsize, 218U);
 
-	if (chip->ecc.mode == NAND_ECC_HW) {
+	if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST) {
 		if (is_imx21_nfc(host) || is_imx27_nfc(host))
 			chip->ecc.strength = 1;
 		else
@@ -1843,10 +1844,10 @@ static int mxcnd_probe(struct platform_device *pdev)
 	mtd_set_ooblayout(mtd, host->devtype_data->ooblayout);
 
 	if (host->pdata.hw_ecc) {
-		this->ecc.mode = NAND_ECC_HW;
+		this->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
 	} else {
-		this->ecc.mode = NAND_ECC_SOFT;
-		this->ecc.algo = NAND_ECC_HAMMING;
+		this->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
+		this->ecc.algo = NAND_ECC_ALGO_HAMMING;
 	}
 
 	/* NAND bus width determines access functions used by upper layer */
diff --git a/drivers/mtd/nand/raw/nand_base.c b/drivers/mtd/nand/raw/nand_base.c
index 0c768cb88f96..1f0d542d5923 100644
--- a/drivers/mtd/nand/raw/nand_base.c
+++ b/drivers/mtd/nand/raw/nand_base.c
@@ -34,6 +34,7 @@
 #include <linux/mm.h>
 #include <linux/types.h>
 #include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
 #include <linux/mtd/nand_ecc.h>
 #include <linux/mtd/nand_bch.h>
 #include <linux/interrupt.h>
@@ -45,166 +46,6 @@
 
 #include "internals.h"
 
-/* Define default oob placement schemes for large and small page devices */
-static int nand_ooblayout_ecc_sp(struct mtd_info *mtd, int section,
-				 struct mtd_oob_region *oobregion)
-{
-	struct nand_chip *chip = mtd_to_nand(mtd);
-	struct nand_ecc_ctrl *ecc = &chip->ecc;
-
-	if (section > 1)
-		return -ERANGE;
-
-	if (!section) {
-		oobregion->offset = 0;
-		if (mtd->oobsize == 16)
-			oobregion->length = 4;
-		else
-			oobregion->length = 3;
-	} else {
-		if (mtd->oobsize == 8)
-			return -ERANGE;
-
-		oobregion->offset = 6;
-		oobregion->length = ecc->total - 4;
-	}
-
-	return 0;
-}
-
-static int nand_ooblayout_free_sp(struct mtd_info *mtd, int section,
-				  struct mtd_oob_region *oobregion)
-{
-	if (section > 1)
-		return -ERANGE;
-
-	if (mtd->oobsize == 16) {
-		if (section)
-			return -ERANGE;
-
-		oobregion->length = 8;
-		oobregion->offset = 8;
-	} else {
-		oobregion->length = 2;
-		if (!section)
-			oobregion->offset = 3;
-		else
-			oobregion->offset = 6;
-	}
-
-	return 0;
-}
-
-const struct mtd_ooblayout_ops nand_ooblayout_sp_ops = {
-	.ecc = nand_ooblayout_ecc_sp,
-	.free = nand_ooblayout_free_sp,
-};
-EXPORT_SYMBOL_GPL(nand_ooblayout_sp_ops);
-
-static int nand_ooblayout_ecc_lp(struct mtd_info *mtd, int section,
-				 struct mtd_oob_region *oobregion)
-{
-	struct nand_chip *chip = mtd_to_nand(mtd);
-	struct nand_ecc_ctrl *ecc = &chip->ecc;
-
-	if (section || !ecc->total)
-		return -ERANGE;
-
-	oobregion->length = ecc->total;
-	oobregion->offset = mtd->oobsize - oobregion->length;
-
-	return 0;
-}
-
-static int nand_ooblayout_free_lp(struct mtd_info *mtd, int section,
-				  struct mtd_oob_region *oobregion)
-{
-	struct nand_chip *chip = mtd_to_nand(mtd);
-	struct nand_ecc_ctrl *ecc = &chip->ecc;
-
-	if (section)
-		return -ERANGE;
-
-	oobregion->length = mtd->oobsize - ecc->total - 2;
-	oobregion->offset = 2;
-
-	return 0;
-}
-
-const struct mtd_ooblayout_ops nand_ooblayout_lp_ops = {
-	.ecc = nand_ooblayout_ecc_lp,
-	.free = nand_ooblayout_free_lp,
-};
-EXPORT_SYMBOL_GPL(nand_ooblayout_lp_ops);
-
-/*
- * Support the old "large page" layout used for 1-bit Hamming ECC where ECC
- * are placed at a fixed offset.
- */
-static int nand_ooblayout_ecc_lp_hamming(struct mtd_info *mtd, int section,
-					 struct mtd_oob_region *oobregion)
-{
-	struct nand_chip *chip = mtd_to_nand(mtd);
-	struct nand_ecc_ctrl *ecc = &chip->ecc;
-
-	if (section)
-		return -ERANGE;
-
-	switch (mtd->oobsize) {
-	case 64:
-		oobregion->offset = 40;
-		break;
-	case 128:
-		oobregion->offset = 80;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	oobregion->length = ecc->total;
-	if (oobregion->offset + oobregion->length > mtd->oobsize)
-		return -ERANGE;
-
-	return 0;
-}
-
-static int nand_ooblayout_free_lp_hamming(struct mtd_info *mtd, int section,
-					  struct mtd_oob_region *oobregion)
-{
-	struct nand_chip *chip = mtd_to_nand(mtd);
-	struct nand_ecc_ctrl *ecc = &chip->ecc;
-	int ecc_offset = 0;
-
-	if (section < 0 || section > 1)
-		return -ERANGE;
-
-	switch (mtd->oobsize) {
-	case 64:
-		ecc_offset = 40;
-		break;
-	case 128:
-		ecc_offset = 80;
-		break;
-	default:
-		return -EINVAL;
-	}
-
-	if (section == 0) {
-		oobregion->offset = 2;
-		oobregion->length = ecc_offset - 2;
-	} else {
-		oobregion->offset = ecc_offset + ecc->total;
-		oobregion->length = mtd->oobsize - oobregion->offset;
-	}
-
-	return 0;
-}
-
-static const struct mtd_ooblayout_ops nand_ooblayout_lp_hamming_ops = {
-	.ecc = nand_ooblayout_ecc_lp_hamming,
-	.free = nand_ooblayout_free_lp_hamming,
-};
-
 static int nand_pairing_dist3_get_info(struct mtd_info *mtd, int page,
 				       struct mtd_pairing_info *info)
 {
@@ -4750,6 +4591,8 @@ static inline bool is_full_id_nand(struct nand_flash_dev *type)
 static bool find_full_id_nand(struct nand_chip *chip,
 			      struct nand_flash_dev *type)
 {
+	struct nand_device *base = &chip->base;
+	struct nand_ecc_props requirements;
 	struct mtd_info *mtd = nand_to_mtd(chip);
 	struct nand_memory_organization *memorg;
 	u8 *id_data = chip->id.data;
@@ -4771,8 +4614,9 @@ static bool find_full_id_nand(struct nand_chip *chip,
 					   memorg->pagesize *
 					   memorg->pages_per_eraseblock);
 		chip->options |= type->options;
-		chip->base.eccreq.strength = NAND_ECC_STRENGTH(type);
-		chip->base.eccreq.step_size = NAND_ECC_STEP(type);
+		requirements.strength = NAND_ECC_STRENGTH(type);
+		requirements.step_size = NAND_ECC_STEP(type);
+		nanddev_set_ecc_requirements(base, &requirements);
 
 		chip->parameters.model = kstrdup(type->name, GFP_KERNEL);
 		if (!chip->parameters.model)
@@ -5033,91 +4877,101 @@ free_detect_allocation:
 	return ret;
 }
 
-static const char * const nand_ecc_modes[] = {
-	[NAND_ECC_NONE]		= "none",
-	[NAND_ECC_SOFT]		= "soft",
-	[NAND_ECC_HW]		= "hw",
-	[NAND_ECC_HW_SYNDROME]	= "hw_syndrome",
-	[NAND_ECC_ON_DIE]	= "on-die",
-};
-
-static int of_get_nand_ecc_mode(struct device_node *np)
+static enum nand_ecc_engine_type
+of_get_rawnand_ecc_engine_type_legacy(struct device_node *np)
 {
+	enum nand_ecc_legacy_mode {
+		NAND_ECC_INVALID,
+		NAND_ECC_NONE,
+		NAND_ECC_SOFT,
+		NAND_ECC_SOFT_BCH,
+		NAND_ECC_HW,
+		NAND_ECC_HW_SYNDROME,
+		NAND_ECC_ON_DIE,
+	};
+	const char * const nand_ecc_legacy_modes[] = {
+		[NAND_ECC_NONE]		= "none",
+		[NAND_ECC_SOFT]		= "soft",
+		[NAND_ECC_SOFT_BCH]	= "soft_bch",
+		[NAND_ECC_HW]		= "hw",
+		[NAND_ECC_HW_SYNDROME]	= "hw_syndrome",
+		[NAND_ECC_ON_DIE]	= "on-die",
+	};
+	enum nand_ecc_legacy_mode eng_type;
 	const char *pm;
-	int err, i;
+	int err;
 
 	err = of_property_read_string(np, "nand-ecc-mode", &pm);
-	if (err < 0)
-		return err;
-
-	for (i = NAND_ECC_NONE; i < ARRAY_SIZE(nand_ecc_modes); i++)
-		if (!strcasecmp(pm, nand_ecc_modes[i]))
-			return i;
-
-	/*
-	 * For backward compatibility we support few obsoleted values that don't
-	 * have their mappings into the nand_ecc_mode enum anymore (they were
-	 * merged with other enums).
-	 */
-	if (!strcasecmp(pm, "soft_bch"))
-		return NAND_ECC_SOFT;
+	if (err)
+		return NAND_ECC_ENGINE_TYPE_INVALID;
+
+	for (eng_type = NAND_ECC_NONE;
+	     eng_type < ARRAY_SIZE(nand_ecc_legacy_modes); eng_type++) {
+		if (!strcasecmp(pm, nand_ecc_legacy_modes[eng_type])) {
+			switch (eng_type) {
+			case NAND_ECC_NONE:
+				return NAND_ECC_ENGINE_TYPE_NONE;
+			case NAND_ECC_SOFT:
+			case NAND_ECC_SOFT_BCH:
+				return NAND_ECC_ENGINE_TYPE_SOFT;
+			case NAND_ECC_HW:
+			case NAND_ECC_HW_SYNDROME:
+				return NAND_ECC_ENGINE_TYPE_ON_HOST;
+			case NAND_ECC_ON_DIE:
+				return NAND_ECC_ENGINE_TYPE_ON_DIE;
+			default:
+				break;
+			}
+		}
+	}
 
-	return -ENODEV;
+	return NAND_ECC_ENGINE_TYPE_INVALID;
 }
 
-static const char * const nand_ecc_algos[] = {
-	[NAND_ECC_HAMMING]	= "hamming",
-	[NAND_ECC_BCH]		= "bch",
-	[NAND_ECC_RS]		= "rs",
-};
-
-static enum nand_ecc_algo of_get_nand_ecc_algo(struct device_node *np)
+static enum nand_ecc_placement
+of_get_rawnand_ecc_placement_legacy(struct device_node *np)
 {
-	enum nand_ecc_algo ecc_algo;
 	const char *pm;
 	int err;
 
-	err = of_property_read_string(np, "nand-ecc-algo", &pm);
+	err = of_property_read_string(np, "nand-ecc-mode", &pm);
 	if (!err) {
-		for (ecc_algo = NAND_ECC_HAMMING;
-		     ecc_algo < ARRAY_SIZE(nand_ecc_algos);
-		     ecc_algo++) {
-			if (!strcasecmp(pm, nand_ecc_algos[ecc_algo]))
-				return ecc_algo;
-		}
+		if (!strcasecmp(pm, "hw_syndrome"))
+			return NAND_ECC_PLACEMENT_INTERLEAVED;
 	}
 
-	/*
-	 * For backward compatibility we also read "nand-ecc-mode" checking
-	 * for some obsoleted values that were specifying ECC algorithm.
-	 */
+	return NAND_ECC_PLACEMENT_UNKNOWN;
+}
+
+static enum nand_ecc_algo of_get_rawnand_ecc_algo_legacy(struct device_node *np)
+{
+	const char *pm;
+	int err;
+
 	err = of_property_read_string(np, "nand-ecc-mode", &pm);
 	if (!err) {
 		if (!strcasecmp(pm, "soft"))
-			return NAND_ECC_HAMMING;
+			return NAND_ECC_ALGO_HAMMING;
 		else if (!strcasecmp(pm, "soft_bch"))
-			return NAND_ECC_BCH;
+			return NAND_ECC_ALGO_BCH;
 	}
 
-	return NAND_ECC_UNKNOWN;
+	return NAND_ECC_ALGO_UNKNOWN;
 }
 
-static int of_get_nand_ecc_step_size(struct device_node *np)
+static void of_get_nand_ecc_legacy_user_config(struct nand_chip *chip)
 {
-	int ret;
-	u32 val;
+	struct device_node *dn = nand_get_flash_node(chip);
+	struct nand_ecc_props *user_conf = &chip->base.ecc.user_conf;
 
-	ret = of_property_read_u32(np, "nand-ecc-step-size", &val);
-	return ret ? ret : val;
-}
+	if (user_conf->engine_type == NAND_ECC_ENGINE_TYPE_INVALID)
+		user_conf->engine_type = of_get_rawnand_ecc_engine_type_legacy(dn);
 
-static int of_get_nand_ecc_strength(struct device_node *np)
-{
-	int ret;
-	u32 val;
+	if (user_conf->algo == NAND_ECC_ALGO_UNKNOWN)
+		user_conf->algo = of_get_rawnand_ecc_algo_legacy(dn);
 
-	ret = of_property_read_u32(np, "nand-ecc-strength", &val);
-	return ret ? ret : val;
+	if (user_conf->placement == NAND_ECC_PLACEMENT_UNKNOWN)
+		user_conf->placement = of_get_rawnand_ecc_placement_legacy(dn);
 }
 
 static int of_get_nand_bus_width(struct device_node *np)
@@ -5141,11 +4995,10 @@ static bool of_get_nand_on_flash_bbt(struct device_node *np)
 	return of_property_read_bool(np, "nand-on-flash-bbt");
 }
 
-static int nand_dt_init(struct nand_chip *chip)
+static int rawnand_dt_init(struct nand_chip *chip)
 {
+	struct nand_device *nand = mtd_to_nanddev(nand_to_mtd(chip));
 	struct device_node *dn = nand_get_flash_node(chip);
-	enum nand_ecc_algo ecc_algo;
-	int ecc_mode, ecc_strength, ecc_step;
 
 	if (!dn)
 		return 0;
@@ -5159,25 +5012,29 @@ static int nand_dt_init(struct nand_chip *chip)
 	if (of_get_nand_on_flash_bbt(dn))
 		chip->bbt_options |= NAND_BBT_USE_FLASH;
 
-	ecc_mode = of_get_nand_ecc_mode(dn);
-	ecc_algo = of_get_nand_ecc_algo(dn);
-	ecc_strength = of_get_nand_ecc_strength(dn);
-	ecc_step = of_get_nand_ecc_step_size(dn);
-
-	if (ecc_mode >= 0)
-		chip->ecc.mode = ecc_mode;
+	of_get_nand_ecc_user_config(nand);
+	of_get_nand_ecc_legacy_user_config(chip);
 
-	if (ecc_algo != NAND_ECC_UNKNOWN)
-		chip->ecc.algo = ecc_algo;
-
-	if (ecc_strength >= 0)
-		chip->ecc.strength = ecc_strength;
+	/*
+	 * If neither the user nor the NAND controller have requested a specific
+	 * ECC engine type, we will default to NAND_ECC_ENGINE_TYPE_ON_HOST.
+	 */
+	nand->ecc.defaults.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
 
-	if (ecc_step > 0)
-		chip->ecc.size = ecc_step;
+	/*
+	 * Use the user requested engine type, unless there is none, in this
+	 * case default to the NAND controller choice, otherwise fallback to
+	 * the raw NAND default one.
+	 */
+	if (nand->ecc.user_conf.engine_type != NAND_ECC_ENGINE_TYPE_INVALID)
+		chip->ecc.engine_type = nand->ecc.user_conf.engine_type;
+	if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_INVALID)
+		chip->ecc.engine_type = nand->ecc.defaults.engine_type;
 
-	if (of_property_read_bool(dn, "nand-ecc-maximize"))
-		chip->ecc.options |= NAND_ECC_MAXIMIZE;
+	chip->ecc.placement = nand->ecc.user_conf.placement;
+	chip->ecc.algo = nand->ecc.user_conf.algo;
+	chip->ecc.strength = nand->ecc.user_conf.strength;
+	chip->ecc.size = nand->ecc.user_conf.step_size;
 
 	return 0;
 }
@@ -5215,7 +5072,7 @@ static int nand_scan_ident(struct nand_chip *chip, unsigned int maxchips,
 	/* Enforce the right timings for reset/detection */
 	chip->current_interface_config = nand_get_reset_interface_config();
 
-	ret = nand_dt_init(chip);
+	ret = rawnand_dt_init(chip);
 	if (ret)
 		return ret;
 
@@ -5282,16 +5139,76 @@ static void nand_scan_ident_cleanup(struct nand_chip *chip)
 	kfree(chip->parameters.onfi);
 }
 
+static int nand_set_ecc_on_host_ops(struct nand_chip *chip)
+{
+	struct nand_ecc_ctrl *ecc = &chip->ecc;
+
+	switch (ecc->placement) {
+	case NAND_ECC_PLACEMENT_UNKNOWN:
+	case NAND_ECC_PLACEMENT_OOB:
+		/* Use standard hwecc read page function? */
+		if (!ecc->read_page)
+			ecc->read_page = nand_read_page_hwecc;
+		if (!ecc->write_page)
+			ecc->write_page = nand_write_page_hwecc;
+		if (!ecc->read_page_raw)
+			ecc->read_page_raw = nand_read_page_raw;
+		if (!ecc->write_page_raw)
+			ecc->write_page_raw = nand_write_page_raw;
+		if (!ecc->read_oob)
+			ecc->read_oob = nand_read_oob_std;
+		if (!ecc->write_oob)
+			ecc->write_oob = nand_write_oob_std;
+		if (!ecc->read_subpage)
+			ecc->read_subpage = nand_read_subpage;
+		if (!ecc->write_subpage && ecc->hwctl && ecc->calculate)
+			ecc->write_subpage = nand_write_subpage_hwecc;
+		fallthrough;
+
+	case NAND_ECC_PLACEMENT_INTERLEAVED:
+		if ((!ecc->calculate || !ecc->correct || !ecc->hwctl) &&
+		    (!ecc->read_page ||
+		     ecc->read_page == nand_read_page_hwecc ||
+		     !ecc->write_page ||
+		     ecc->write_page == nand_write_page_hwecc)) {
+			WARN(1, "No ECC functions supplied; hardware ECC not possible\n");
+			return -EINVAL;
+		}
+		/* Use standard syndrome read/write page function? */
+		if (!ecc->read_page)
+			ecc->read_page = nand_read_page_syndrome;
+		if (!ecc->write_page)
+			ecc->write_page = nand_write_page_syndrome;
+		if (!ecc->read_page_raw)
+			ecc->read_page_raw = nand_read_page_raw_syndrome;
+		if (!ecc->write_page_raw)
+			ecc->write_page_raw = nand_write_page_raw_syndrome;
+		if (!ecc->read_oob)
+			ecc->read_oob = nand_read_oob_syndrome;
+		if (!ecc->write_oob)
+			ecc->write_oob = nand_write_oob_syndrome;
+		break;
+
+	default:
+		pr_warn("Invalid NAND_ECC_PLACEMENT %d\n",
+			ecc->placement);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 static int nand_set_ecc_soft_ops(struct nand_chip *chip)
 {
 	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct nand_device *nanddev = mtd_to_nanddev(mtd);
 	struct nand_ecc_ctrl *ecc = &chip->ecc;
 
-	if (WARN_ON(ecc->mode != NAND_ECC_SOFT))
+	if (WARN_ON(ecc->engine_type != NAND_ECC_ENGINE_TYPE_SOFT))
 		return -EINVAL;
 
 	switch (ecc->algo) {
-	case NAND_ECC_HAMMING:
+	case NAND_ECC_ALGO_HAMMING:
 		ecc->calculate = nand_calculate_ecc;
 		ecc->correct = nand_correct_data;
 		ecc->read_page = nand_read_page_swecc;
@@ -5312,7 +5229,7 @@ static int nand_set_ecc_soft_ops(struct nand_chip *chip)
 			ecc->options |= NAND_ECC_SOFT_HAMMING_SM_ORDER;
 
 		return 0;
-	case NAND_ECC_BCH:
+	case NAND_ECC_ALGO_BCH:
 		if (!mtd_nand_has_bch()) {
 			WARN(1, "CONFIG_MTD_NAND_ECC_SW_BCH not enabled\n");
 			return -EINVAL;
@@ -5350,7 +5267,7 @@ static int nand_set_ecc_soft_ops(struct nand_chip *chip)
 				return -EINVAL;
 			}
 
-			mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
+			mtd_set_ooblayout(mtd, nand_get_large_page_ooblayout());
 
 		}
 
@@ -5359,8 +5276,8 @@ static int nand_set_ecc_soft_ops(struct nand_chip *chip)
 		 * used, otherwise we don't know how many bytes can really be
 		 * used.
 		 */
-		if (mtd->ooblayout == &nand_ooblayout_lp_ops &&
-		    ecc->options & NAND_ECC_MAXIMIZE) {
+		if (mtd->ooblayout == nand_get_large_page_ooblayout() &&
+		    nanddev->ecc.user_conf.flags & NAND_ECC_MAXIMIZE_STRENGTH) {
 			int steps, bytes;
 
 			/* Always prefer 1k blocks over 512bytes ones */
@@ -5454,10 +5371,12 @@ static int
 nand_match_ecc_req(struct nand_chip *chip,
 		   const struct nand_ecc_caps *caps, int oobavail)
 {
+	const struct nand_ecc_props *requirements =
+		nanddev_get_ecc_requirements(&chip->base);
 	struct mtd_info *mtd = nand_to_mtd(chip);
 	const struct nand_ecc_step_info *stepinfo;
-	int req_step = chip->base.eccreq.step_size;
-	int req_strength = chip->base.eccreq.strength;
+	int req_step = requirements->step_size;
+	int req_strength = requirements->strength;
 	int req_corr, step_size, strength, nsteps, ecc_bytes, ecc_bytes_total;
 	int best_step, best_strength, best_ecc_bytes;
 	int best_ecc_bytes_total = INT_MAX;
@@ -5598,11 +5517,12 @@ nand_maximize_ecc(struct nand_chip *chip,
  * @caps: ECC engine caps info structure
  * @oobavail: OOB size that the ECC engine can use
  *
- * Choose the ECC configuration according to following logic
+ * Choose the ECC configuration according to following logic.
  *
  * 1. If both ECC step size and ECC strength are already set (usually by DT)
  *    then check if it is supported by this controller.
- * 2. If NAND_ECC_MAXIMIZE is set, then select maximum ECC strength.
+ * 2. If the user provided the nand-ecc-maximize property, then select maximum
+ *    ECC strength.
  * 3. Otherwise, try to match the ECC step size and ECC strength closest
  *    to the chip's requirement. If available OOB size can't fit the chip
  *    requirement then fallback to the maximum ECC step size and ECC strength.
@@ -5613,6 +5533,7 @@ int nand_ecc_choose_conf(struct nand_chip *chip,
 			 const struct nand_ecc_caps *caps, int oobavail)
 {
 	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct nand_device *nanddev = mtd_to_nanddev(mtd);
 
 	if (WARN_ON(oobavail < 0 || oobavail > mtd->oobsize))
 		return -EINVAL;
@@ -5620,7 +5541,7 @@ int nand_ecc_choose_conf(struct nand_chip *chip,
 	if (chip->ecc.size && chip->ecc.strength)
 		return nand_check_ecc_caps(chip, caps, oobavail);
 
-	if (chip->ecc.options & NAND_ECC_MAXIMIZE)
+	if (nanddev->ecc.user_conf.flags & NAND_ECC_MAXIMIZE_STRENGTH)
 		return nand_maximize_ecc(chip, caps, oobavail);
 
 	if (!nand_match_ecc_req(chip, caps, oobavail))
@@ -5630,41 +5551,6 @@ int nand_ecc_choose_conf(struct nand_chip *chip,
 }
 EXPORT_SYMBOL_GPL(nand_ecc_choose_conf);
 
-/*
- * Check if the chip configuration meet the datasheet requirements.
-
- * If our configuration corrects A bits per B bytes and the minimum
- * required correction level is X bits per Y bytes, then we must ensure
- * both of the following are true:
- *
- * (1) A / B >= X / Y
- * (2) A >= X
- *
- * Requirement (1) ensures we can correct for the required bitflip density.
- * Requirement (2) ensures we can correct even when all bitflips are clumped
- * in the same sector.
- */
-static bool nand_ecc_strength_good(struct nand_chip *chip)
-{
-	struct mtd_info *mtd = nand_to_mtd(chip);
-	struct nand_ecc_ctrl *ecc = &chip->ecc;
-	int corr, ds_corr;
-
-	if (ecc->size == 0 || chip->base.eccreq.step_size == 0)
-		/* Not enough information */
-		return true;
-
-	/*
-	 * We get the number of corrected bits per page to compare
-	 * the correction density.
-	 */
-	corr = (mtd->writesize * ecc->strength) / ecc->size;
-	ds_corr = (mtd->writesize * chip->base.eccreq.strength) /
-		  chip->base.eccreq.step_size;
-
-	return corr >= ds_corr && ecc->strength >= chip->base.eccreq.strength;
-}
-
 static int rawnand_erase(struct nand_device *nand, const struct nand_pos *pos)
 {
 	struct nand_chip *chip = container_of(nand, struct nand_chip,
@@ -5752,15 +5638,17 @@ static int nand_scan_tail(struct nand_chip *chip)
 	 * If no default placement scheme is given, select an appropriate one.
 	 */
 	if (!mtd->ooblayout &&
-	    !(ecc->mode == NAND_ECC_SOFT && ecc->algo == NAND_ECC_BCH)) {
+	    !(ecc->engine_type == NAND_ECC_ENGINE_TYPE_SOFT &&
+	      ecc->algo == NAND_ECC_ALGO_BCH)) {
 		switch (mtd->oobsize) {
 		case 8:
 		case 16:
-			mtd_set_ooblayout(mtd, &nand_ooblayout_sp_ops);
+			mtd_set_ooblayout(mtd, nand_get_small_page_ooblayout());
 			break;
 		case 64:
 		case 128:
-			mtd_set_ooblayout(mtd, &nand_ooblayout_lp_hamming_ops);
+			mtd_set_ooblayout(mtd,
+					  nand_get_large_page_hamming_ooblayout());
 			break;
 		default:
 			/*
@@ -5770,9 +5658,9 @@ static int nand_scan_tail(struct nand_chip *chip)
 			 * page with ECC layout when ->oobsize <= 128 for
 			 * compatibility reasons.
 			 */
-			if (ecc->mode == NAND_ECC_NONE) {
+			if (ecc->engine_type == NAND_ECC_ENGINE_TYPE_NONE) {
 				mtd_set_ooblayout(mtd,
-						&nand_ooblayout_lp_ops);
+						  nand_get_large_page_ooblayout());
 				break;
 			}
 
@@ -5788,49 +5676,11 @@ static int nand_scan_tail(struct nand_chip *chip)
 	 * selected and we have 256 byte pagesize fallback to software ECC
 	 */
 
-	switch (ecc->mode) {
-	case NAND_ECC_HW:
-		/* Use standard hwecc read page function? */
-		if (!ecc->read_page)
-			ecc->read_page = nand_read_page_hwecc;
-		if (!ecc->write_page)
-			ecc->write_page = nand_write_page_hwecc;
-		if (!ecc->read_page_raw)
-			ecc->read_page_raw = nand_read_page_raw;
-		if (!ecc->write_page_raw)
-			ecc->write_page_raw = nand_write_page_raw;
-		if (!ecc->read_oob)
-			ecc->read_oob = nand_read_oob_std;
-		if (!ecc->write_oob)
-			ecc->write_oob = nand_write_oob_std;
-		if (!ecc->read_subpage)
-			ecc->read_subpage = nand_read_subpage;
-		if (!ecc->write_subpage && ecc->hwctl && ecc->calculate)
-			ecc->write_subpage = nand_write_subpage_hwecc;
-		fallthrough;
-	case NAND_ECC_HW_SYNDROME:
-		if ((!ecc->calculate || !ecc->correct || !ecc->hwctl) &&
-		    (!ecc->read_page ||
-		     ecc->read_page == nand_read_page_hwecc ||
-		     !ecc->write_page ||
-		     ecc->write_page == nand_write_page_hwecc)) {
-			WARN(1, "No ECC functions supplied; hardware ECC not possible\n");
-			ret = -EINVAL;
+	switch (ecc->engine_type) {
+	case NAND_ECC_ENGINE_TYPE_ON_HOST:
+		ret = nand_set_ecc_on_host_ops(chip);
+		if (ret)
 			goto err_nand_manuf_cleanup;
-		}
-		/* Use standard syndrome read/write page function? */
-		if (!ecc->read_page)
-			ecc->read_page = nand_read_page_syndrome;
-		if (!ecc->write_page)
-			ecc->write_page = nand_write_page_syndrome;
-		if (!ecc->read_page_raw)
-			ecc->read_page_raw = nand_read_page_raw_syndrome;
-		if (!ecc->write_page_raw)
-			ecc->write_page_raw = nand_write_page_raw_syndrome;
-		if (!ecc->read_oob)
-			ecc->read_oob = nand_read_oob_syndrome;
-		if (!ecc->write_oob)
-			ecc->write_oob = nand_write_oob_syndrome;
 
 		if (mtd->writesize >= ecc->size) {
 			if (!ecc->strength) {
@@ -5842,18 +5692,17 @@ static int nand_scan_tail(struct nand_chip *chip)
 		}
 		pr_warn("%d byte HW ECC not possible on %d byte page size, fallback to SW ECC\n",
 			ecc->size, mtd->writesize);
-		ecc->mode = NAND_ECC_SOFT;
-		ecc->algo = NAND_ECC_HAMMING;
+		ecc->engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
+		ecc->algo = NAND_ECC_ALGO_HAMMING;
 		fallthrough;
-	case NAND_ECC_SOFT:
+
+	case NAND_ECC_ENGINE_TYPE_SOFT:
 		ret = nand_set_ecc_soft_ops(chip);
-		if (ret) {
-			ret = -EINVAL;
+		if (ret)
 			goto err_nand_manuf_cleanup;
-		}
 		break;
 
-	case NAND_ECC_ON_DIE:
+	case NAND_ECC_ENGINE_TYPE_ON_DIE:
 		if (!ecc->read_page || !ecc->write_page) {
 			WARN(1, "No ECC functions supplied; on-die ECC not possible\n");
 			ret = -EINVAL;
@@ -5865,8 +5714,8 @@ static int nand_scan_tail(struct nand_chip *chip)
 			ecc->write_oob = nand_write_oob_std;
 		break;
 
-	case NAND_ECC_NONE:
-		pr_warn("NAND_ECC_NONE selected by board driver. This is not recommended!\n");
+	case NAND_ECC_ENGINE_TYPE_NONE:
+		pr_warn("NAND_ECC_ENGINE_TYPE_NONE selected by board driver. This is not recommended!\n");
 		ecc->read_page = nand_read_page_raw;
 		ecc->write_page = nand_write_page_raw;
 		ecc->read_oob = nand_read_oob_std;
@@ -5879,7 +5728,7 @@ static int nand_scan_tail(struct nand_chip *chip)
 		break;
 
 	default:
-		WARN(1, "Invalid NAND_ECC_MODE %d\n", ecc->mode);
+		WARN(1, "Invalid NAND_ECC_MODE %d\n", ecc->engine_type);
 		ret = -EINVAL;
 		goto err_nand_manuf_cleanup;
 	}
@@ -5913,7 +5762,10 @@ static int nand_scan_tail(struct nand_chip *chip)
 		ret = -EINVAL;
 		goto err_nand_manuf_cleanup;
 	}
+
 	ecc->total = ecc->steps * ecc->bytes;
+	chip->base.ecc.ctx.total = ecc->total;
+
 	if (ecc->total > mtd->oobsize) {
 		WARN(1, "Total number of ECC bytes exceeded oobsize\n");
 		ret = -EINVAL;
@@ -5931,11 +5783,11 @@ static int nand_scan_tail(struct nand_chip *chip)
 	mtd->oobavail = ret;
 
 	/* ECC sanity check: warn if it's too weak */
-	if (!nand_ecc_strength_good(chip))
+	if (!nand_ecc_is_strong_enough(&chip->base))
 		pr_warn("WARNING: %s: the ECC used on your system (%db/%dB) is too weak compared to the one required by the NAND chip (%db/%dB)\n",
 			mtd->name, chip->ecc.strength, chip->ecc.size,
-			chip->base.eccreq.strength,
-			chip->base.eccreq.step_size);
+			nanddev_get_ecc_requirements(&chip->base)->strength,
+			nanddev_get_ecc_requirements(&chip->base)->step_size);
 
 	/* Allow subpage writes up to ecc.steps. Not possible for MLC flash */
 	if (!(chip->options & NAND_NO_SUBPAGE_WRITE) && nand_is_slc(chip)) {
@@ -5956,8 +5808,8 @@ static int nand_scan_tail(struct nand_chip *chip)
 	chip->pagecache.page = -1;
 
 	/* Large page NAND with SOFT_ECC should support subpage reads */
-	switch (ecc->mode) {
-	case NAND_ECC_SOFT:
+	switch (ecc->engine_type) {
+	case NAND_ECC_ENGINE_TYPE_SOFT:
 		if (chip->page_shift > 9)
 			chip->options |= NAND_SUBPAGE_READ;
 		break;
@@ -6101,8 +5953,8 @@ EXPORT_SYMBOL(nand_scan_with_ids);
  */
 void nand_cleanup(struct nand_chip *chip)
 {
-	if (chip->ecc.mode == NAND_ECC_SOFT &&
-	    chip->ecc.algo == NAND_ECC_BCH)
+	if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_SOFT &&
+	    chip->ecc.algo == NAND_ECC_ALGO_BCH)
 		nand_bch_free((struct nand_bch_control *)chip->ecc.priv);
 
 	nanddev_cleanup(&chip->base);
diff --git a/drivers/mtd/nand/raw/nand_bch.c b/drivers/mtd/nand/raw/nand_bch.c
index d5af8c5fd02f..9d19ac14c196 100644
--- a/drivers/mtd/nand/raw/nand_bch.c
+++ b/drivers/mtd/nand/raw/nand_bch.c
@@ -165,6 +165,7 @@ struct nand_bch_control *nand_bch_init(struct mtd_info *mtd)
 	 */
 	nand->ecc.steps = eccsteps;
 	nand->ecc.total = eccsteps * eccbytes;
+	nand->base.ecc.ctx.total = nand->ecc.total;
 	if (mtd_ooblayout_count_eccbytes(mtd) != (eccsteps*eccbytes)) {
 		pr_warn("invalid ecc layout\n");
 		goto fail;
diff --git a/drivers/mtd/nand/raw/nand_esmt.c b/drivers/mtd/nand/raw/nand_esmt.c
index 3338c68aaaf1..4412c407aef3 100644
--- a/drivers/mtd/nand/raw/nand_esmt.c
+++ b/drivers/mtd/nand/raw/nand_esmt.c
@@ -10,27 +10,32 @@
 
 static void esmt_nand_decode_id(struct nand_chip *chip)
 {
+	struct nand_device *base = &chip->base;
+	struct nand_ecc_props requirements = {};
+
 	nand_decode_ext_id(chip);
 
 	/* Extract ECC requirements from 5th id byte. */
 	if (chip->id.len >= 5 && nand_is_slc(chip)) {
-		chip->base.eccreq.step_size = 512;
+		requirements.step_size = 512;
 		switch (chip->id.data[4] & 0x3) {
 		case 0x0:
-			chip->base.eccreq.strength = 4;
+			requirements.strength = 4;
 			break;
 		case 0x1:
-			chip->base.eccreq.strength = 2;
+			requirements.strength = 2;
 			break;
 		case 0x2:
-			chip->base.eccreq.strength = 1;
+			requirements.strength = 1;
 			break;
 		default:
 			WARN(1, "Could not get ECC info");
-			chip->base.eccreq.step_size = 0;
+			requirements.step_size = 0;
 			break;
 		}
 	}
+
+	nanddev_set_ecc_requirements(base, &requirements);
 }
 
 static int esmt_nand_init(struct nand_chip *chip)
diff --git a/drivers/mtd/nand/raw/nand_hynix.c b/drivers/mtd/nand/raw/nand_hynix.c
index 6d08eb834456..a9f50c9af109 100644
--- a/drivers/mtd/nand/raw/nand_hynix.c
+++ b/drivers/mtd/nand/raw/nand_hynix.c
@@ -495,34 +495,36 @@ static void hynix_nand_extract_oobsize(struct nand_chip *chip,
 static void hynix_nand_extract_ecc_requirements(struct nand_chip *chip,
 						bool valid_jedecid)
 {
+	struct nand_device *base = &chip->base;
+	struct nand_ecc_props requirements = {};
 	u8 ecc_level = (chip->id.data[4] >> 4) & 0x7;
 
 	if (valid_jedecid) {
 		/* Reference: H27UCG8T2E datasheet */
-		chip->base.eccreq.step_size = 1024;
+		requirements.step_size = 1024;
 
 		switch (ecc_level) {
 		case 0:
-			chip->base.eccreq.step_size = 0;
-			chip->base.eccreq.strength = 0;
+			requirements.step_size = 0;
+			requirements.strength = 0;
 			break;
 		case 1:
-			chip->base.eccreq.strength = 4;
+			requirements.strength = 4;
 			break;
 		case 2:
-			chip->base.eccreq.strength = 24;
+			requirements.strength = 24;
 			break;
 		case 3:
-			chip->base.eccreq.strength = 32;
+			requirements.strength = 32;
 			break;
 		case 4:
-			chip->base.eccreq.strength = 40;
+			requirements.strength = 40;
 			break;
 		case 5:
-			chip->base.eccreq.strength = 50;
+			requirements.strength = 50;
 			break;
 		case 6:
-			chip->base.eccreq.strength = 60;
+			requirements.strength = 60;
 			break;
 		default:
 			/*
@@ -543,14 +545,14 @@ static void hynix_nand_extract_ecc_requirements(struct nand_chip *chip,
 		if (nand_tech < 3) {
 			/* > 26nm, reference: H27UBG8T2A datasheet */
 			if (ecc_level < 5) {
-				chip->base.eccreq.step_size = 512;
-				chip->base.eccreq.strength = 1 << ecc_level;
+				requirements.step_size = 512;
+				requirements.strength = 1 << ecc_level;
 			} else if (ecc_level < 7) {
 				if (ecc_level == 5)
-					chip->base.eccreq.step_size = 2048;
+					requirements.step_size = 2048;
 				else
-					chip->base.eccreq.step_size = 1024;
-				chip->base.eccreq.strength = 24;
+					requirements.step_size = 1024;
+				requirements.strength = 24;
 			} else {
 				/*
 				 * We should never reach this case, but if that
@@ -563,18 +565,20 @@ static void hynix_nand_extract_ecc_requirements(struct nand_chip *chip,
 		} else {
 			/* <= 26nm, reference: H27UBG8T2B datasheet */
 			if (!ecc_level) {
-				chip->base.eccreq.step_size = 0;
-				chip->base.eccreq.strength = 0;
+				requirements.step_size = 0;
+				requirements.strength = 0;
 			} else if (ecc_level < 5) {
-				chip->base.eccreq.step_size = 512;
-				chip->base.eccreq.strength = 1 << (ecc_level - 1);
+				requirements.step_size = 512;
+				requirements.strength = 1 << (ecc_level - 1);
 			} else {
-				chip->base.eccreq.step_size = 1024;
-				chip->base.eccreq.strength = 24 +
+				requirements.step_size = 1024;
+				requirements.strength = 24 +
 							(8 * (ecc_level - 5));
 			}
 		}
 	}
+
+	nanddev_set_ecc_requirements(base, &requirements);
 }
 
 static void hynix_nand_extract_scrambling_requirements(struct nand_chip *chip,
diff --git a/drivers/mtd/nand/raw/nand_jedec.c b/drivers/mtd/nand/raw/nand_jedec.c
index b15c42f48755..85b6d9372d80 100644
--- a/drivers/mtd/nand/raw/nand_jedec.c
+++ b/drivers/mtd/nand/raw/nand_jedec.c
@@ -23,6 +23,7 @@
  */
 int nand_jedec_detect(struct nand_chip *chip)
 {
+	struct nand_device *base = &chip->base;
 	struct mtd_info *mtd = nand_to_mtd(chip);
 	struct nand_memory_organization *memorg;
 	struct nand_jedec_params *p;
@@ -120,8 +121,12 @@ int nand_jedec_detect(struct nand_chip *chip)
 	ecc = &p->ecc_info[0];
 
 	if (ecc->codeword_size >= 9) {
-		chip->base.eccreq.strength = ecc->ecc_bits;
-		chip->base.eccreq.step_size = 1 << ecc->codeword_size;
+		struct nand_ecc_props requirements = {
+			.strength = ecc->ecc_bits,
+			.step_size = 1 << ecc->codeword_size,
+		};
+
+		nanddev_set_ecc_requirements(base, &requirements);
 	} else {
 		pr_warn("Invalid codeword size\n");
 	}
diff --git a/drivers/mtd/nand/raw/nand_micron.c b/drivers/mtd/nand/raw/nand_micron.c
index 4385092a9325..c0192881906b 100644
--- a/drivers/mtd/nand/raw/nand_micron.c
+++ b/drivers/mtd/nand/raw/nand_micron.c
@@ -413,6 +413,8 @@ enum {
  */
 static int micron_supports_on_die_ecc(struct nand_chip *chip)
 {
+	const struct nand_ecc_props *requirements =
+		nanddev_get_ecc_requirements(&chip->base);
 	u8 id[5];
 	int ret;
 
@@ -425,7 +427,7 @@ static int micron_supports_on_die_ecc(struct nand_chip *chip)
 	/*
 	 * We only support on-die ECC of 4/512 or 8/512
 	 */
-	if  (chip->base.eccreq.strength != 4 && chip->base.eccreq.strength != 8)
+	if  (requirements->strength != 4 && requirements->strength != 8)
 		return MICRON_ON_DIE_UNSUPPORTED;
 
 	/* 0x2 means on-die ECC is available. */
@@ -466,7 +468,7 @@ static int micron_supports_on_die_ecc(struct nand_chip *chip)
 	/*
 	 * We only support on-die ECC of 4/512 or 8/512
 	 */
-	if  (chip->base.eccreq.strength != 4 && chip->base.eccreq.strength != 8)
+	if  (requirements->strength != 4 && requirements->strength != 8)
 		return MICRON_ON_DIE_UNSUPPORTED;
 
 	return MICRON_ON_DIE_SUPPORTED;
@@ -474,6 +476,9 @@ static int micron_supports_on_die_ecc(struct nand_chip *chip)
 
 static int micron_nand_init(struct nand_chip *chip)
 {
+	struct nand_device *base = &chip->base;
+	const struct nand_ecc_props *requirements =
+		nanddev_get_ecc_requirements(base);
 	struct mtd_info *mtd = nand_to_mtd(chip);
 	struct micron_nand *micron;
 	int ondie;
@@ -497,13 +502,13 @@ static int micron_nand_init(struct nand_chip *chip)
 	ondie = micron_supports_on_die_ecc(chip);
 
 	if (ondie == MICRON_ON_DIE_MANDATORY &&
-	    chip->ecc.mode != NAND_ECC_ON_DIE) {
+	    chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_DIE) {
 		pr_err("On-die ECC forcefully enabled, not supported\n");
 		ret = -EINVAL;
 		goto err_free_manuf_data;
 	}
 
-	if (chip->ecc.mode == NAND_ECC_ON_DIE) {
+	if (chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_DIE) {
 		if (ondie == MICRON_ON_DIE_UNSUPPORTED) {
 			pr_err("On-die ECC selected but not supported\n");
 			ret = -EINVAL;
@@ -523,7 +528,7 @@ static int micron_nand_init(struct nand_chip *chip)
 		 * That's not needed for 8-bit ECC, because the status expose
 		 * a better approximation of the number of bitflips in a page.
 		 */
-		if (chip->base.eccreq.strength == 4) {
+		if (requirements->strength == 4) {
 			micron->ecc.rawbuf = kmalloc(mtd->writesize +
 						     mtd->oobsize,
 						     GFP_KERNEL);
@@ -533,17 +538,17 @@ static int micron_nand_init(struct nand_chip *chip)
 			}
 		}
 
-		if (chip->base.eccreq.strength == 4)
+		if (requirements->strength == 4)
 			mtd_set_ooblayout(mtd,
 					  &micron_nand_on_die_4_ooblayout_ops);
 		else
 			mtd_set_ooblayout(mtd,
 					  &micron_nand_on_die_8_ooblayout_ops);
 
-		chip->ecc.bytes = chip->base.eccreq.strength * 2;
+		chip->ecc.bytes = requirements->strength * 2;
 		chip->ecc.size = 512;
-		chip->ecc.strength = chip->base.eccreq.strength;
-		chip->ecc.algo = NAND_ECC_BCH;
+		chip->ecc.strength = requirements->strength;
+		chip->ecc.algo = NAND_ECC_ALGO_BCH;
 		chip->ecc.read_page = micron_nand_read_page_on_die_ecc;
 		chip->ecc.write_page = micron_nand_write_page_on_die_ecc;
 
diff --git a/drivers/mtd/nand/raw/nand_onfi.c b/drivers/mtd/nand/raw/nand_onfi.c
index be3456627288..45649e03797d 100644
--- a/drivers/mtd/nand/raw/nand_onfi.c
+++ b/drivers/mtd/nand/raw/nand_onfi.c
@@ -34,6 +34,8 @@ u16 onfi_crc16(u16 crc, u8 const *p, size_t len)
 static int nand_flash_detect_ext_param_page(struct nand_chip *chip,
 					    struct nand_onfi_params *p)
 {
+	struct nand_device *base = &chip->base;
+	struct nand_ecc_props requirements;
 	struct onfi_ext_param_page *ep;
 	struct onfi_ext_section *s;
 	struct onfi_ext_ecc_info *ecc;
@@ -94,8 +96,10 @@ static int nand_flash_detect_ext_param_page(struct nand_chip *chip,
 		goto ext_out;
 	}
 
-	chip->base.eccreq.strength = ecc->ecc_bits;
-	chip->base.eccreq.step_size = 1 << ecc->codeword_size;
+	requirements.strength = ecc->ecc_bits;
+	requirements.step_size = 1 << ecc->codeword_size;
+	nanddev_set_ecc_requirements(base, &requirements);
+
 	ret = 0;
 
 ext_out:
@@ -139,6 +143,7 @@ static void nand_bit_wise_majority(const void **srcbufs,
  */
 int nand_onfi_detect(struct nand_chip *chip)
 {
+	struct nand_device *base = &chip->base;
 	struct mtd_info *mtd = nand_to_mtd(chip);
 	struct nand_memory_organization *memorg;
 	struct nand_onfi_params *p = NULL, *pbuf;
@@ -265,8 +270,12 @@ int nand_onfi_detect(struct nand_chip *chip)
 		chip->options |= NAND_BUSWIDTH_16;
 
 	if (p->ecc_bits != 0xff) {
-		chip->base.eccreq.strength = p->ecc_bits;
-		chip->base.eccreq.step_size = 512;
+		struct nand_ecc_props requirements = {
+			.strength = p->ecc_bits,
+			.step_size = 512,
+		};
+
+		nanddev_set_ecc_requirements(base, &requirements);
 	} else if (onfi_version >= 21 &&
 		(le16_to_cpu(p->features) & ONFI_FEATURE_EXT_PARAM_PAGE)) {
 
diff --git a/drivers/mtd/nand/raw/nand_samsung.c b/drivers/mtd/nand/raw/nand_samsung.c
index 3a4a19e808f6..0be6b7563805 100644
--- a/drivers/mtd/nand/raw/nand_samsung.c
+++ b/drivers/mtd/nand/raw/nand_samsung.c
@@ -10,6 +10,8 @@
 
 static void samsung_nand_decode_id(struct nand_chip *chip)
 {
+	struct nand_device *base = &chip->base;
+	struct nand_ecc_props requirements = {};
 	struct mtd_info *mtd = nand_to_mtd(chip);
 	struct nand_memory_organization *memorg;
 
@@ -71,23 +73,23 @@ static void samsung_nand_decode_id(struct nand_chip *chip)
 		/* Extract ECC requirements from 5th id byte*/
 		extid = (chip->id.data[4] >> 4) & 0x07;
 		if (extid < 5) {
-			chip->base.eccreq.step_size = 512;
-			chip->base.eccreq.strength = 1 << extid;
+			requirements.step_size = 512;
+			requirements.strength = 1 << extid;
 		} else {
-			chip->base.eccreq.step_size = 1024;
+			requirements.step_size = 1024;
 			switch (extid) {
 			case 5:
-				chip->base.eccreq.strength = 24;
+				requirements.strength = 24;
 				break;
 			case 6:
-				chip->base.eccreq.strength = 40;
+				requirements.strength = 40;
 				break;
 			case 7:
-				chip->base.eccreq.strength = 60;
+				requirements.strength = 60;
 				break;
 			default:
 				WARN(1, "Could not decode ECC info");
-				chip->base.eccreq.step_size = 0;
+				requirements.step_size = 0;
 			}
 		}
 	} else {
@@ -97,8 +99,8 @@ static void samsung_nand_decode_id(struct nand_chip *chip)
 			switch (chip->id.data[1]) {
 			/* K9F4G08U0D-S[I|C]B0(T00) */
 			case 0xDC:
-				chip->base.eccreq.step_size = 512;
-				chip->base.eccreq.strength = 1;
+				requirements.step_size = 512;
+				requirements.strength = 1;
 				break;
 
 			/* K9F1G08U0E 21nm chips do not support subpage write */
@@ -112,6 +114,8 @@ static void samsung_nand_decode_id(struct nand_chip *chip)
 			}
 		}
 	}
+
+	nanddev_set_ecc_requirements(base, &requirements);
 }
 
 static int samsung_nand_init(struct nand_chip *chip)
diff --git a/drivers/mtd/nand/raw/nand_toshiba.c b/drivers/mtd/nand/raw/nand_toshiba.c
index f746c19f3b2c..cf4f37959421 100644
--- a/drivers/mtd/nand/raw/nand_toshiba.c
+++ b/drivers/mtd/nand/raw/nand_toshiba.c
@@ -140,11 +140,13 @@ static void toshiba_nand_benand_init(struct nand_chip *chip)
 
 	chip->options |= NAND_SUBPAGE_READ;
 
-	mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
+	mtd_set_ooblayout(mtd, nand_get_large_page_ooblayout());
 }
 
 static void toshiba_nand_decode_id(struct nand_chip *chip)
 {
+	struct nand_device *base = &chip->base;
+	struct nand_ecc_props requirements = {};
 	struct mtd_info *mtd = nand_to_mtd(chip);
 	struct nand_memory_organization *memorg;
 
@@ -175,23 +177,25 @@ static void toshiba_nand_decode_id(struct nand_chip *chip)
 	 *  - 24nm: 8 bit ECC for each 512Byte is required.
 	 */
 	if (chip->id.len >= 6 && nand_is_slc(chip)) {
-		chip->base.eccreq.step_size = 512;
+		requirements.step_size = 512;
 		switch (chip->id.data[5] & 0x7) {
 		case 0x4:
-			chip->base.eccreq.strength = 1;
+			requirements.strength = 1;
 			break;
 		case 0x5:
-			chip->base.eccreq.strength = 4;
+			requirements.strength = 4;
 			break;
 		case 0x6:
-			chip->base.eccreq.strength = 8;
+			requirements.strength = 8;
 			break;
 		default:
 			WARN(1, "Could not get ECC info");
-			chip->base.eccreq.step_size = 0;
+			requirements.step_size = 0;
 			break;
 		}
 	}
+
+	nanddev_set_ecc_requirements(base, &requirements);
 }
 
 static int
@@ -273,7 +277,8 @@ static int toshiba_nand_init(struct nand_chip *chip)
 		chip->options |= NAND_BBM_FIRSTPAGE | NAND_BBM_SECONDPAGE;
 
 	/* Check that chip is BENAND and ECC mode is on-die */
-	if (nand_is_slc(chip) && chip->ecc.mode == NAND_ECC_ON_DIE &&
+	if (nand_is_slc(chip) &&
+	    chip->ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_DIE &&
 	    chip->id.data[4] & TOSHIBA_NAND_ID4_IS_BENAND)
 		toshiba_nand_benand_init(chip);
 
diff --git a/drivers/mtd/nand/raw/nandsim.c b/drivers/mtd/nand/raw/nandsim.c
index f5a53aac3c5f..a8048cb8d220 100644
--- a/drivers/mtd/nand/raw/nandsim.c
+++ b/drivers/mtd/nand/raw/nandsim.c
@@ -2234,8 +2234,8 @@ static int ns_attach_chip(struct nand_chip *chip)
 		return -EINVAL;
 	}
 
-	chip->ecc.mode = NAND_ECC_SOFT;
-	chip->ecc.algo = NAND_ECC_BCH;
+	chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
+	chip->ecc.algo = NAND_ECC_ALGO_BCH;
 	chip->ecc.size = 512;
 	chip->ecc.strength = bch;
 	chip->ecc.bytes = eccbytes;
@@ -2274,8 +2274,8 @@ static int __init ns_init_module(void)
 	nsmtd       = nand_to_mtd(chip);
 	nand_set_controller_data(chip, (void *)ns);
 
-	chip->ecc.mode   = NAND_ECC_SOFT;
-	chip->ecc.algo   = NAND_ECC_HAMMING;
+	chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
+	chip->ecc.algo   = NAND_ECC_ALGO_HAMMING;
 	/* The NAND_SKIP_BBTSCAN option is necessary for 'overridesize' */
 	/* and 'badblocks' parameters to work */
 	chip->options   |= NAND_SKIP_BBTSCAN;
diff --git a/drivers/mtd/nand/raw/ndfc.c b/drivers/mtd/nand/raw/ndfc.c
index ed38338c1383..0fb4ba93c41e 100644
--- a/drivers/mtd/nand/raw/ndfc.c
+++ b/drivers/mtd/nand/raw/ndfc.c
@@ -149,7 +149,7 @@ static int ndfc_chip_init(struct ndfc_controller *ndfc,
 	chip->ecc.correct = nand_correct_data;
 	chip->ecc.hwctl = ndfc_enable_hwecc;
 	chip->ecc.calculate = ndfc_calculate_ecc;
-	chip->ecc.mode = NAND_ECC_HW;
+	chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
 	chip->ecc.size = 256;
 	chip->ecc.bytes = 3;
 	chip->ecc.strength = 1;
diff --git a/drivers/mtd/nand/raw/omap2.c b/drivers/mtd/nand/raw/omap2.c
index eb7fcfd9276b..512f60780a50 100644
--- a/drivers/mtd/nand/raw/omap2.c
+++ b/drivers/mtd/nand/raw/omap2.c
@@ -884,8 +884,8 @@ static int omap_correct_data(struct nand_chip *chip, u_char *dat,
 	int stat = 0;
 
 	/* Ex NAND_ECC_HW12_2048 */
-	if ((info->nand.ecc.mode == NAND_ECC_HW) &&
-			(info->nand.ecc.size  == 2048))
+	if (info->nand.ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST &&
+	    info->nand.ecc.size == 2048)
 		blockCnt = 4;
 	else
 		blockCnt = 1;
@@ -2006,12 +2006,12 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
 		return -EINVAL;
 
 	/*
-	 * Bail out earlier to let NAND_ECC_SOFT code create its own
+	 * Bail out earlier to let NAND_ECC_ENGINE_TYPE_SOFT code create its own
 	 * ooblayout instead of using ours.
 	 */
 	if (info->ecc_opt == OMAP_ECC_HAM1_CODE_SW) {
-		chip->ecc.mode = NAND_ECC_SOFT;
-		chip->ecc.algo = NAND_ECC_HAMMING;
+		chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
+		chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
 		return 0;
 	}
 
@@ -2019,7 +2019,7 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
 	switch (info->ecc_opt) {
 	case OMAP_ECC_HAM1_CODE_HW:
 		dev_info(dev, "nand: using OMAP_ECC_HAM1_CODE_HW\n");
-		chip->ecc.mode		= NAND_ECC_HW;
+		chip->ecc.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST;
 		chip->ecc.bytes		= 3;
 		chip->ecc.size		= 512;
 		chip->ecc.strength	= 1;
@@ -2036,7 +2036,7 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
 
 	case OMAP_ECC_BCH4_CODE_HW_DETECTION_SW:
 		pr_info("nand: using OMAP_ECC_BCH4_CODE_HW_DETECTION_SW\n");
-		chip->ecc.mode		= NAND_ECC_HW;
+		chip->ecc.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST;
 		chip->ecc.size		= 512;
 		chip->ecc.bytes		= 7;
 		chip->ecc.strength	= 4;
@@ -2056,7 +2056,7 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
 
 	case OMAP_ECC_BCH4_CODE_HW:
 		pr_info("nand: using OMAP_ECC_BCH4_CODE_HW ECC scheme\n");
-		chip->ecc.mode		= NAND_ECC_HW;
+		chip->ecc.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST;
 		chip->ecc.size		= 512;
 		/* 14th bit is kept reserved for ROM-code compatibility */
 		chip->ecc.bytes		= 7 + 1;
@@ -2078,7 +2078,7 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
 
 	case OMAP_ECC_BCH8_CODE_HW_DETECTION_SW:
 		pr_info("nand: using OMAP_ECC_BCH8_CODE_HW_DETECTION_SW\n");
-		chip->ecc.mode		= NAND_ECC_HW;
+		chip->ecc.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST;
 		chip->ecc.size		= 512;
 		chip->ecc.bytes		= 13;
 		chip->ecc.strength	= 8;
@@ -2098,7 +2098,7 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
 
 	case OMAP_ECC_BCH8_CODE_HW:
 		pr_info("nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme\n");
-		chip->ecc.mode		= NAND_ECC_HW;
+		chip->ecc.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST;
 		chip->ecc.size		= 512;
 		/* 14th bit is kept reserved for ROM-code compatibility */
 		chip->ecc.bytes		= 13 + 1;
@@ -2121,7 +2121,7 @@ static int omap_nand_attach_chip(struct nand_chip *chip)
 
 	case OMAP_ECC_BCH16_CODE_HW:
 		pr_info("Using OMAP_ECC_BCH16_CODE_HW ECC scheme\n");
-		chip->ecc.mode		= NAND_ECC_HW;
+		chip->ecc.engine_type	= NAND_ECC_ENGINE_TYPE_ON_HOST;
 		chip->ecc.size		= 512;
 		chip->ecc.bytes		= 26;
 		chip->ecc.strength	= 16;
diff --git a/drivers/mtd/nand/raw/orion_nand.c b/drivers/mtd/nand/raw/orion_nand.c
index 880b54ca1b41..df9c0f8e4b4e 100644
--- a/drivers/mtd/nand/raw/orion_nand.c
+++ b/drivers/mtd/nand/raw/orion_nand.c
@@ -139,8 +139,8 @@ static int __init orion_nand_probe(struct platform_device *pdev)
 	nc->legacy.IO_ADDR_R = nc->legacy.IO_ADDR_W = io_base;
 	nc->legacy.cmd_ctrl = orion_nand_cmd_ctrl;
 	nc->legacy.read_buf = orion_nand_read_buf;
-	nc->ecc.mode = NAND_ECC_SOFT;
-	nc->ecc.algo = NAND_ECC_HAMMING;
+	nc->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
+	nc->ecc.algo = NAND_ECC_ALGO_HAMMING;
 
 	if (board->chip_delay)
 		nc->legacy.chip_delay = board->chip_delay;
diff --git a/drivers/mtd/nand/raw/pasemi_nand.c b/drivers/mtd/nand/raw/pasemi_nand.c
index d8eca8c3fdcd..2b8f155cc0c5 100644
--- a/drivers/mtd/nand/raw/pasemi_nand.c
+++ b/drivers/mtd/nand/raw/pasemi_nand.c
@@ -68,7 +68,7 @@ static void pasemi_hwcontrol(struct nand_chip *chip, int cmd,
 	inl(lpcctl);
 }
 
-int pasemi_device_ready(struct nand_chip *chip)
+static int pasemi_device_ready(struct nand_chip *chip)
 {
 	return !!(inl(lpcctl) & LBICTRL_LPCCTL_NR);
 }
@@ -132,8 +132,8 @@ static int pasemi_nand_probe(struct platform_device *ofdev)
 	chip->legacy.read_buf = pasemi_read_buf;
 	chip->legacy.write_buf = pasemi_write_buf;
 	chip->legacy.chip_delay = 0;
-	chip->ecc.mode = NAND_ECC_SOFT;
-	chip->ecc.algo = NAND_ECC_HAMMING;
+	chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
+	chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
 
 	/* Enable the following for a flash based bad block table */
 	chip->bbt_options = NAND_BBT_USE_FLASH;
diff --git a/drivers/mtd/nand/raw/plat_nand.c b/drivers/mtd/nand/raw/plat_nand.c
index 556182f26057..b98c0d5c413f 100644
--- a/drivers/mtd/nand/raw/plat_nand.c
+++ b/drivers/mtd/nand/raw/plat_nand.c
@@ -66,8 +66,8 @@ static int plat_nand_probe(struct platform_device *pdev)
 	data->chip.options |= pdata->chip.options;
 	data->chip.bbt_options |= pdata->chip.bbt_options;
 
-	data->chip.ecc.mode = NAND_ECC_SOFT;
-	data->chip.ecc.algo = NAND_ECC_HAMMING;
+	data->chip.ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
+	data->chip.ecc.algo = NAND_ECC_ALGO_HAMMING;
 
 	platform_set_drvdata(pdev, data);
 
diff --git a/drivers/mtd/nand/raw/qcom_nandc.c b/drivers/mtd/nand/raw/qcom_nandc.c
index bd7a7251429b..777fb0de0680 100644
--- a/drivers/mtd/nand/raw/qcom_nandc.c
+++ b/drivers/mtd/nand/raw/qcom_nandc.c
@@ -2550,7 +2550,7 @@ static int qcom_nand_attach_chip(struct nand_chip *chip)
 	ecc->write_page_raw	= qcom_nandc_write_page_raw;
 	ecc->write_oob		= qcom_nandc_write_oob;
 
-	ecc->mode = NAND_ECC_HW;
+	ecc->engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
 
 	mtd_set_ooblayout(mtd, &qcom_nand_ooblayout_ops);
 
@@ -2702,10 +2702,8 @@ static int qcom_nandc_alloc(struct qcom_nand_controller *nandc)
 		if (IS_ERR(nandc->tx_chan)) {
 			ret = PTR_ERR(nandc->tx_chan);
 			nandc->tx_chan = NULL;
-			if (ret != -EPROBE_DEFER)
-				dev_err(nandc->dev,
-					"tx DMA channel request failed: %d\n",
-					ret);
+			dev_err_probe(nandc->dev, ret,
+				      "tx DMA channel request failed\n");
 			goto unalloc;
 		}
 
@@ -2713,10 +2711,8 @@ static int qcom_nandc_alloc(struct qcom_nand_controller *nandc)
 		if (IS_ERR(nandc->rx_chan)) {
 			ret = PTR_ERR(nandc->rx_chan);
 			nandc->rx_chan = NULL;
-			if (ret != -EPROBE_DEFER)
-				dev_err(nandc->dev,
-					"rx DMA channel request failed: %d\n",
-					ret);
+			dev_err_probe(nandc->dev, ret,
+				      "rx DMA channel request failed\n");
 			goto unalloc;
 		}
 
@@ -2724,10 +2720,8 @@ static int qcom_nandc_alloc(struct qcom_nand_controller *nandc)
 		if (IS_ERR(nandc->cmd_chan)) {
 			ret = PTR_ERR(nandc->cmd_chan);
 			nandc->cmd_chan = NULL;
-			if (ret != -EPROBE_DEFER)
-				dev_err(nandc->dev,
-					"cmd DMA channel request failed: %d\n",
-					ret);
+			dev_err_probe(nandc->dev, ret,
+				      "cmd DMA channel request failed\n");
 			goto unalloc;
 		}
 
@@ -2750,10 +2744,8 @@ static int qcom_nandc_alloc(struct qcom_nand_controller *nandc)
 		if (IS_ERR(nandc->chan)) {
 			ret = PTR_ERR(nandc->chan);
 			nandc->chan = NULL;
-			if (ret != -EPROBE_DEFER)
-				dev_err(nandc->dev,
-					"rxtx DMA channel request failed: %d\n",
-					ret);
+			dev_err_probe(nandc->dev, ret,
+				      "rxtx DMA channel request failed\n");
 			return ret;
 		}
 	}
diff --git a/drivers/mtd/nand/raw/r852.c b/drivers/mtd/nand/raw/r852.c
index f865e3a47b01..6b7addd2c420 100644
--- a/drivers/mtd/nand/raw/r852.c
+++ b/drivers/mtd/nand/raw/r852.c
@@ -859,7 +859,8 @@ static int  r852_probe(struct pci_dev *pci_dev, const struct pci_device_id *id)
 	chip->legacy.write_buf = r852_write_buf;
 
 	/* ecc */
-	chip->ecc.mode = NAND_ECC_HW_SYNDROME;
+	chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
+	chip->ecc.placement = NAND_ECC_PLACEMENT_INTERLEAVED;
 	chip->ecc.size = R852_DMA_LEN;
 	chip->ecc.bytes = SM_OOB_SIZE;
 	chip->ecc.strength = 2;
diff --git a/drivers/mtd/nand/raw/s3c2410.c b/drivers/mtd/nand/raw/s3c2410.c
index 105522205979..fbd0fa48e063 100644
--- a/drivers/mtd/nand/raw/s3c2410.c
+++ b/drivers/mtd/nand/raw/s3c2410.c
@@ -904,7 +904,7 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
 	nmtd->info	   = info;
 	nmtd->set	   = set;
 
-	chip->ecc.mode = info->platform->ecc_mode;
+	chip->ecc.engine_type = info->platform->engine_type;
 
 	/*
 	 * If you use u-boot BBT creation code, specifying this flag will
@@ -929,24 +929,24 @@ static int s3c2410_nand_attach_chip(struct nand_chip *chip)
 	struct mtd_info *mtd = nand_to_mtd(chip);
 	struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
 
-	switch (chip->ecc.mode) {
+	switch (chip->ecc.engine_type) {
 
-	case NAND_ECC_NONE:
+	case NAND_ECC_ENGINE_TYPE_NONE:
 		dev_info(info->device, "ECC disabled\n");
 		break;
 
-	case NAND_ECC_SOFT:
+	case NAND_ECC_ENGINE_TYPE_SOFT:
 		/*
-		 * This driver expects Hamming based ECC when ecc_mode is set
-		 * to NAND_ECC_SOFT. Force ecc.algo to NAND_ECC_HAMMING to
-		 * avoid adding an extra ecc_algo field to
-		 * s3c2410_platform_nand.
+		 * This driver expects Hamming based ECC when engine_type is set
+		 * to NAND_ECC_ENGINE_TYPE_SOFT. Force ecc.algo to
+		 * NAND_ECC_ALGO_HAMMING to avoid adding an extra ecc_algo field
+		 * to s3c2410_platform_nand.
 		 */
-		chip->ecc.algo = NAND_ECC_HAMMING;
+		chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
 		dev_info(info->device, "soft ECC\n");
 		break;
 
-	case NAND_ECC_HW:
+	case NAND_ECC_ENGINE_TYPE_ON_HOST:
 		chip->ecc.calculate = s3c2410_nand_calculate_ecc;
 		chip->ecc.correct   = s3c2410_nand_correct_data;
 		chip->ecc.strength  = 1;
diff --git a/drivers/mtd/nand/raw/sh_flctl.c b/drivers/mtd/nand/raw/sh_flctl.c
index a661b8bb2dd5..13df4bdf792a 100644
--- a/drivers/mtd/nand/raw/sh_flctl.c
+++ b/drivers/mtd/nand/raw/sh_flctl.c
@@ -1039,13 +1039,13 @@ static int flctl_chip_attach_chip(struct nand_chip *chip)
 		chip->ecc.strength = 4;
 		chip->ecc.read_page = flctl_read_page_hwecc;
 		chip->ecc.write_page = flctl_write_page_hwecc;
-		chip->ecc.mode = NAND_ECC_HW;
+		chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
 
 		/* 4 symbols ECC enabled */
 		flctl->flcmncr_base |= _4ECCEN;
 	} else {
-		chip->ecc.mode = NAND_ECC_SOFT;
-		chip->ecc.algo = NAND_ECC_HAMMING;
+		chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
+		chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
 	}
 
 	return 0;
diff --git a/drivers/mtd/nand/raw/sharpsl.c b/drivers/mtd/nand/raw/sharpsl.c
index 51286f7acf54..1327bfb3d5d3 100644
--- a/drivers/mtd/nand/raw/sharpsl.c
+++ b/drivers/mtd/nand/raw/sharpsl.c
@@ -157,7 +157,7 @@ static int sharpsl_nand_probe(struct platform_device *pdev)
 	/* 15 us command delay time */
 	this->legacy.chip_delay = 15;
 	/* set eccmode using hardware ECC */
-	this->ecc.mode = NAND_ECC_HW;
+	this->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
 	this->ecc.size = 256;
 	this->ecc.bytes = 3;
 	this->ecc.strength = 1;
diff --git a/drivers/mtd/nand/raw/socrates_nand.c b/drivers/mtd/nand/raw/socrates_nand.c
index 243b34cfbc1b..0f63ff6f7fe7 100644
--- a/drivers/mtd/nand/raw/socrates_nand.c
+++ b/drivers/mtd/nand/raw/socrates_nand.c
@@ -153,8 +153,9 @@ static int socrates_nand_probe(struct platform_device *ofdev)
 	nand_chip->legacy.read_buf = socrates_nand_read_buf;
 	nand_chip->legacy.dev_ready = socrates_nand_device_ready;
 
-	nand_chip->ecc.mode = NAND_ECC_SOFT;	/* enable ECC */
-	nand_chip->ecc.algo = NAND_ECC_HAMMING;
+	/* enable ECC */
+	nand_chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
+	nand_chip->ecc.algo = NAND_ECC_ALGO_HAMMING;
 
 	/* TODO: I have no idea what real delay is. */
 	nand_chip->legacy.chip_delay = 20;	/* 20us command delay time */
diff --git a/drivers/mtd/nand/raw/stm32_fmc2_nand.c b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
index 7f4546ae9130..b31a5818234d 100644
--- a/drivers/mtd/nand/raw/stm32_fmc2_nand.c
+++ b/drivers/mtd/nand/raw/stm32_fmc2_nand.c
@@ -1696,14 +1696,15 @@ static int stm32_fmc2_nfc_attach_chip(struct nand_chip *chip)
 	int ret;
 
 	/*
-	 * Only NAND_ECC_HW mode is actually supported
+	 * Only NAND_ECC_ENGINE_TYPE_ON_HOST mode is actually supported
 	 * Hamming => ecc.strength = 1
 	 * BCH4 => ecc.strength = 4
 	 * BCH8 => ecc.strength = 8
 	 * ECC sector size = 512
 	 */
-	if (chip->ecc.mode != NAND_ECC_HW) {
-		dev_err(nfc->dev, "nand_ecc_mode is not well defined in the DT\n");
+	if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST) {
+		dev_err(nfc->dev,
+			"nand_ecc_engine_type is not well defined in the DT\n");
 		return -EINVAL;
 	}
 
@@ -1762,7 +1763,7 @@ static int stm32_fmc2_nfc_parse_child(struct stm32_fmc2_nfc *nfc,
 			return ret;
 		}
 
-		if (cs > FMC2_MAX_CE) {
+		if (cs >= FMC2_MAX_CE) {
 			dev_err(nfc->dev, "invalid reg value: %d\n", cs);
 			return -EINVAL;
 		}
@@ -1952,7 +1953,7 @@ static int stm32_fmc2_nfc_probe(struct platform_device *pdev)
 			 NAND_USES_DMA;
 
 	/* Default ECC settings */
-	chip->ecc.mode = NAND_ECC_HW;
+	chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
 	chip->ecc.size = FMC2_ECC_STEP_SIZE;
 	chip->ecc.strength = FMC2_ECC_BCH8;
 
diff --git a/drivers/mtd/nand/raw/sunxi_nand.c b/drivers/mtd/nand/raw/sunxi_nand.c
index 9c50c2b965e1..2a7ca3072f35 100644
--- a/drivers/mtd/nand/raw/sunxi_nand.c
+++ b/drivers/mtd/nand/raw/sunxi_nand.c
@@ -1575,7 +1575,7 @@ static int sunxi_nand_ooblayout_free(struct mtd_info *mtd, int section,
 	 * only have 2 bytes available in the first user data
 	 * section.
 	 */
-	if (!section && ecc->mode == NAND_ECC_HW) {
+	if (!section && ecc->engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST) {
 		oobregion->offset = 2;
 		oobregion->length = 2;
 
@@ -1609,12 +1609,13 @@ static int sunxi_nand_hw_ecc_ctrl_init(struct nand_chip *nand,
 	static const u8 strengths[] = { 16, 24, 28, 32, 40, 48, 56, 60, 64 };
 	struct sunxi_nfc *nfc = to_sunxi_nfc(nand->controller);
 	struct mtd_info *mtd = nand_to_mtd(nand);
+	struct nand_device *nanddev = mtd_to_nanddev(mtd);
 	struct sunxi_nand_hw_ecc *data;
 	int nsectors;
 	int ret;
 	int i;
 
-	if (ecc->options & NAND_ECC_MAXIMIZE) {
+	if (nanddev->ecc.user_conf.flags & NAND_ECC_MAXIMIZE_STRENGTH) {
 		int bytes;
 
 		ecc->size = 1024;
@@ -1720,11 +1721,11 @@ err:
 
 static void sunxi_nand_ecc_cleanup(struct nand_ecc_ctrl *ecc)
 {
-	switch (ecc->mode) {
-	case NAND_ECC_HW:
+	switch (ecc->engine_type) {
+	case NAND_ECC_ENGINE_TYPE_ON_HOST:
 		sunxi_nand_hw_ecc_ctrl_cleanup(ecc);
 		break;
-	case NAND_ECC_NONE:
+	case NAND_ECC_ENGINE_TYPE_NONE:
 	default:
 		break;
 	}
@@ -1732,6 +1733,8 @@ static void sunxi_nand_ecc_cleanup(struct nand_ecc_ctrl *ecc)
 
 static int sunxi_nand_attach_chip(struct nand_chip *nand)
 {
+	const struct nand_ecc_props *requirements =
+		nanddev_get_ecc_requirements(&nand->base);
 	struct nand_ecc_ctrl *ecc = &nand->ecc;
 	struct device_node *np = nand_get_flash_node(nand);
 	int ret;
@@ -1745,21 +1748,21 @@ static int sunxi_nand_attach_chip(struct nand_chip *nand)
 	nand->options |= NAND_SUBPAGE_READ;
 
 	if (!ecc->size) {
-		ecc->size = nand->base.eccreq.step_size;
-		ecc->strength = nand->base.eccreq.strength;
+		ecc->size = requirements->step_size;
+		ecc->strength = requirements->strength;
 	}
 
 	if (!ecc->size || !ecc->strength)
 		return -EINVAL;
 
-	switch (ecc->mode) {
-	case NAND_ECC_HW:
+	switch (ecc->engine_type) {
+	case NAND_ECC_ENGINE_TYPE_ON_HOST:
 		ret = sunxi_nand_hw_ecc_ctrl_init(nand, ecc, np);
 		if (ret)
 			return ret;
 		break;
-	case NAND_ECC_NONE:
-	case NAND_ECC_SOFT:
+	case NAND_ECC_ENGINE_TYPE_NONE:
+	case NAND_ECC_ENGINE_TYPE_SOFT:
 		break;
 	default:
 		return -EINVAL;
@@ -1991,7 +1994,7 @@ static int sunxi_nand_chip_init(struct device *dev, struct sunxi_nfc *nfc,
 	 * Set the ECC mode to the default value in case nothing is specified
 	 * in the DT.
 	 */
-	nand->ecc.mode = NAND_ECC_HW;
+	nand->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
 	nand_set_flash_node(nand, np);
 
 	mtd = nand_to_mtd(nand);
diff --git a/drivers/mtd/nand/raw/tango_nand.c b/drivers/mtd/nand/raw/tango_nand.c
index bdb965ae7a4a..359187b5a4be 100644
--- a/drivers/mtd/nand/raw/tango_nand.c
+++ b/drivers/mtd/nand/raw/tango_nand.c
@@ -549,8 +549,8 @@ static int tango_attach_chip(struct nand_chip *chip)
 {
 	struct nand_ecc_ctrl *ecc = &chip->ecc;
 
-	ecc->mode = NAND_ECC_HW;
-	ecc->algo = NAND_ECC_BCH;
+	ecc->engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
+	ecc->algo = NAND_ECC_ALGO_BCH;
 	ecc->bytes = DIV_ROUND_UP(ecc->strength * FIELD_ORDER, BITS_PER_BYTE);
 
 	ecc->read_page_raw = tango_read_page_raw;
diff --git a/drivers/mtd/nand/raw/tegra_nand.c b/drivers/mtd/nand/raw/tegra_nand.c
index 6b6212ffa01c..fbf67722a049 100644
--- a/drivers/mtd/nand/raw/tegra_nand.c
+++ b/drivers/mtd/nand/raw/tegra_nand.c
@@ -479,7 +479,7 @@ static void tegra_nand_hw_ecc(struct tegra_nand_controller *ctrl,
 {
 	struct tegra_nand_chip *nand = to_tegra_chip(chip);
 
-	if (chip->ecc.algo == NAND_ECC_BCH && enable)
+	if (chip->ecc.algo == NAND_ECC_ALGO_BCH && enable)
 		writel_relaxed(nand->bch_config, ctrl->regs + BCH_CONFIG);
 	else
 		writel_relaxed(0, ctrl->regs + BCH_CONFIG);
@@ -840,7 +840,10 @@ static int tegra_nand_get_strength(struct nand_chip *chip, const int *strength,
 				   int strength_len, int bits_per_step,
 				   int oobsize)
 {
-	bool maximize = chip->ecc.options & NAND_ECC_MAXIMIZE;
+	struct nand_device *base = mtd_to_nanddev(nand_to_mtd(chip));
+	const struct nand_ecc_props *requirements =
+		nanddev_get_ecc_requirements(base);
+	bool maximize = base->ecc.user_conf.flags & NAND_ECC_MAXIMIZE_STRENGTH;
 	int i;
 
 	/*
@@ -855,7 +858,7 @@ static int tegra_nand_get_strength(struct nand_chip *chip, const int *strength,
 		} else {
 			strength_sel = strength[i];
 
-			if (strength_sel < chip->base.eccreq.strength)
+			if (strength_sel < requirements->strength)
 				continue;
 		}
 
@@ -877,7 +880,7 @@ static int tegra_nand_select_strength(struct nand_chip *chip, int oobsize)
 	int strength_len, bits_per_step;
 
 	switch (chip->ecc.algo) {
-	case NAND_ECC_RS:
+	case NAND_ECC_ALGO_RS:
 		bits_per_step = BITS_PER_STEP_RS;
 		if (chip->options & NAND_IS_BOOT_MEDIUM) {
 			strength = rs_strength_bootable;
@@ -887,7 +890,7 @@ static int tegra_nand_select_strength(struct nand_chip *chip, int oobsize)
 			strength_len = ARRAY_SIZE(rs_strength);
 		}
 		break;
-	case NAND_ECC_BCH:
+	case NAND_ECC_ALGO_BCH:
 		bits_per_step = BITS_PER_STEP_BCH;
 		if (chip->options & NAND_IS_BOOT_MEDIUM) {
 			strength = bch_strength_bootable;
@@ -908,6 +911,8 @@ static int tegra_nand_select_strength(struct nand_chip *chip, int oobsize)
 static int tegra_nand_attach_chip(struct nand_chip *chip)
 {
 	struct tegra_nand_controller *ctrl = to_tegra_ctrl(chip->controller);
+	const struct nand_ecc_props *requirements =
+		nanddev_get_ecc_requirements(&chip->base);
 	struct tegra_nand_chip *nand = to_tegra_chip(chip);
 	struct mtd_info *mtd = nand_to_mtd(chip);
 	int bits_per_step;
@@ -916,12 +921,12 @@ static int tegra_nand_attach_chip(struct nand_chip *chip)
 	if (chip->bbt_options & NAND_BBT_USE_FLASH)
 		chip->bbt_options |= NAND_BBT_NO_OOB;
 
-	chip->ecc.mode = NAND_ECC_HW;
+	chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
 	chip->ecc.size = 512;
 	chip->ecc.steps = mtd->writesize / chip->ecc.size;
-	if (chip->base.eccreq.step_size != 512) {
+	if (requirements->step_size != 512) {
 		dev_err(ctrl->dev, "Unsupported step size %d\n",
-			chip->base.eccreq.step_size);
+			requirements->step_size);
 		return -EINVAL;
 	}
 
@@ -935,14 +940,14 @@ static int tegra_nand_attach_chip(struct nand_chip *chip)
 	if (chip->options & NAND_BUSWIDTH_16)
 		nand->config |= CONFIG_BUS_WIDTH_16;
 
-	if (chip->ecc.algo == NAND_ECC_UNKNOWN) {
+	if (chip->ecc.algo == NAND_ECC_ALGO_UNKNOWN) {
 		if (mtd->writesize < 2048)
-			chip->ecc.algo = NAND_ECC_RS;
+			chip->ecc.algo = NAND_ECC_ALGO_RS;
 		else
-			chip->ecc.algo = NAND_ECC_BCH;
+			chip->ecc.algo = NAND_ECC_ALGO_BCH;
 	}
 
-	if (chip->ecc.algo == NAND_ECC_BCH && mtd->writesize < 2048) {
+	if (chip->ecc.algo == NAND_ECC_ALGO_BCH && mtd->writesize < 2048) {
 		dev_err(ctrl->dev, "BCH supports 2K or 4K page size only\n");
 		return -EINVAL;
 	}
@@ -952,7 +957,7 @@ static int tegra_nand_attach_chip(struct nand_chip *chip)
 		if (ret < 0) {
 			dev_err(ctrl->dev,
 				"No valid strength found, minimum %d\n",
-				chip->base.eccreq.strength);
+				requirements->strength);
 			return ret;
 		}
 
@@ -963,7 +968,7 @@ static int tegra_nand_attach_chip(struct nand_chip *chip)
 			   CONFIG_SKIP_SPARE_SIZE_4;
 
 	switch (chip->ecc.algo) {
-	case NAND_ECC_RS:
+	case NAND_ECC_ALGO_RS:
 		bits_per_step = BITS_PER_STEP_RS * chip->ecc.strength;
 		mtd_set_ooblayout(mtd, &tegra_nand_oob_rs_ops);
 		nand->config_ecc |= CONFIG_HW_ECC | CONFIG_ECC_SEL |
@@ -984,7 +989,7 @@ static int tegra_nand_attach_chip(struct nand_chip *chip)
 			return -EINVAL;
 		}
 		break;
-	case NAND_ECC_BCH:
+	case NAND_ECC_ALGO_BCH:
 		bits_per_step = BITS_PER_STEP_BCH * chip->ecc.strength;
 		mtd_set_ooblayout(mtd, &tegra_nand_oob_bch_ops);
 		nand->bch_config = BCH_ENABLE;
@@ -1013,7 +1018,7 @@ static int tegra_nand_attach_chip(struct nand_chip *chip)
 	}
 
 	dev_info(ctrl->dev, "Using %s with strength %d per 512 byte step\n",
-		 chip->ecc.algo == NAND_ECC_BCH ? "BCH" : "RS",
+		 chip->ecc.algo == NAND_ECC_ALGO_BCH ? "BCH" : "RS",
 		 chip->ecc.strength);
 
 	chip->ecc.bytes = DIV_ROUND_UP(bits_per_step, BITS_PER_BYTE);
diff --git a/drivers/mtd/nand/raw/tmio_nand.c b/drivers/mtd/nand/raw/tmio_nand.c
index 843a8683b737..235a2f7b1bad 100644
--- a/drivers/mtd/nand/raw/tmio_nand.c
+++ b/drivers/mtd/nand/raw/tmio_nand.c
@@ -410,7 +410,7 @@ static int tmio_probe(struct platform_device *dev)
 	nand_chip->legacy.read_buf = tmio_nand_read_buf;
 
 	/* set eccmode using hardware ECC */
-	nand_chip->ecc.mode = NAND_ECC_HW;
+	nand_chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
 	nand_chip->ecc.size = 512;
 	nand_chip->ecc.bytes = 6;
 	nand_chip->ecc.strength = 2;
diff --git a/drivers/mtd/nand/raw/txx9ndfmc.c b/drivers/mtd/nand/raw/txx9ndfmc.c
index 47d966871445..ef81dce6b5c4 100644
--- a/drivers/mtd/nand/raw/txx9ndfmc.c
+++ b/drivers/mtd/nand/raw/txx9ndfmc.c
@@ -329,7 +329,7 @@ static int __init txx9ndfmc_probe(struct platform_device *dev)
 		chip->ecc.calculate = txx9ndfmc_calculate_ecc;
 		chip->ecc.correct = txx9ndfmc_correct_data;
 		chip->ecc.hwctl = txx9ndfmc_enable_hwecc;
-		chip->ecc.mode = NAND_ECC_HW;
+		chip->ecc.engine_type = NAND_ECC_ENGINE_TYPE_ON_HOST;
 		chip->ecc.strength = 1;
 		chip->legacy.chip_delay = 100;
 		chip->controller = &drvdata->controller;
diff --git a/drivers/mtd/nand/raw/vf610_nfc.c b/drivers/mtd/nand/raw/vf610_nfc.c
index 7248c5901183..40d70f991d89 100644
--- a/drivers/mtd/nand/raw/vf610_nfc.c
+++ b/drivers/mtd/nand/raw/vf610_nfc.c
@@ -323,11 +323,6 @@ static inline void vf610_nfc_ecc_mode(struct vf610_nfc *nfc, int ecc_mode)
 			    CONFIG_ECC_MODE_SHIFT, ecc_mode);
 }
 
-static inline void vf610_nfc_transfer_size(struct vf610_nfc *nfc, int size)
-{
-	vf610_nfc_write(nfc, NFC_SECTOR_SIZE, size);
-}
-
 static inline void vf610_nfc_run(struct vf610_nfc *nfc, u32 col, u32 row,
 				 u32 cmd1, u32 cmd2, u32 trfr_sz)
 {
@@ -732,7 +727,7 @@ static void vf610_nfc_init_controller(struct vf610_nfc *nfc)
 	else
 		vf610_nfc_clear(nfc, NFC_FLASH_CONFIG, CONFIG_16BIT);
 
-	if (nfc->chip.ecc.mode == NAND_ECC_HW) {
+	if (nfc->chip.ecc.engine_type == NAND_ECC_ENGINE_TYPE_ON_HOST) {
 		/* Set ECC status offset in SRAM */
 		vf610_nfc_set_field(nfc, NFC_FLASH_CONFIG,
 				    CONFIG_ECC_SRAM_ADDR_MASK,
@@ -761,7 +756,7 @@ static int vf610_nfc_attach_chip(struct nand_chip *chip)
 		return -ENXIO;
 	}
 
-	if (chip->ecc.mode != NAND_ECC_HW)
+	if (chip->ecc.engine_type != NAND_ECC_ENGINE_TYPE_ON_HOST)
 		return 0;
 
 	if (mtd->writesize != PAGE_2K && mtd->oobsize < 64) {
@@ -779,7 +774,7 @@ static int vf610_nfc_attach_chip(struct nand_chip *chip)
 		mtd->oobsize = 64;
 
 	/* Use default large page ECC layout defined in NAND core */
-	mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
+	mtd_set_ooblayout(mtd, nand_get_large_page_ooblayout());
 	if (chip->ecc.strength == 32) {
 		nfc->ecc_mode = ECC_60_BYTE;
 		chip->ecc.bytes = 60;
@@ -852,8 +847,10 @@ static int vf610_nfc_probe(struct platform_device *pdev)
 	}
 
 	of_id = of_match_device(vf610_nfc_dt_ids, &pdev->dev);
-	if (!of_id)
-		return -ENODEV;
+	if (!of_id) {
+		err = -ENODEV;
+		goto err_disable_clk;
+	}
 
 	nfc->variant = (enum vf610_nfc_variant)of_id->data;
 
diff --git a/drivers/mtd/nand/raw/xway_nand.c b/drivers/mtd/nand/raw/xway_nand.c
index 29255476afdb..f2dbd63a5c1f 100644
--- a/drivers/mtd/nand/raw/xway_nand.c
+++ b/drivers/mtd/nand/raw/xway_nand.c
@@ -180,8 +180,8 @@ static int xway_nand_probe(struct platform_device *pdev)
 	data->chip.legacy.read_byte = xway_read_byte;
 	data->chip.legacy.chip_delay = 30;
 
-	data->chip.ecc.mode = NAND_ECC_SOFT;
-	data->chip.ecc.algo = NAND_ECC_HAMMING;
+	data->chip.ecc.engine_type = NAND_ECC_ENGINE_TYPE_SOFT;
+	data->chip.ecc.algo = NAND_ECC_ALGO_HAMMING;
 
 	platform_set_drvdata(pdev, data);
 	nand_set_controller_data(&data->chip, data);
diff --git a/drivers/mtd/nand/spi/core.c b/drivers/mtd/nand/spi/core.c
index e2c382ffc5b6..c35221794645 100644
--- a/drivers/mtd/nand/spi/core.c
+++ b/drivers/mtd/nand/spi/core.c
@@ -419,7 +419,7 @@ static int spinand_check_ecc_status(struct spinand_device *spinand, u8 status)
 		 * fixed, so let's return the maximum possible value so that
 		 * wear-leveling layers move the data immediately.
 		 */
-		return nand->eccreq.strength;
+		return nanddev_get_ecc_conf(nand)->strength;
 
 	case STATUS_ECC_UNCOR_ERROR:
 		return -EBADMSG;
@@ -497,7 +497,7 @@ static int spinand_mtd_read(struct mtd_info *mtd, loff_t from,
 
 	mutex_lock(&spinand->lock);
 
-	nanddev_io_for_each_page(nand, from, ops, &iter) {
+	nanddev_io_for_each_page(nand, NAND_PAGE_READ, from, ops, &iter) {
 		ret = spinand_select_target(spinand, iter.req.pos.target);
 		if (ret)
 			break;
@@ -545,7 +545,7 @@ static int spinand_mtd_write(struct mtd_info *mtd, loff_t to,
 
 	mutex_lock(&spinand->lock);
 
-	nanddev_io_for_each_page(nand, to, ops, &iter) {
+	nanddev_io_for_each_page(nand, NAND_PAGE_WRITE, to, ops, &iter) {
 		ret = spinand_select_target(spinand, iter.req.pos.target);
 		if (ret)
 			break;
@@ -902,7 +902,7 @@ int spinand_match_and_init(struct spinand_device *spinand,
 			continue;
 
 		nand->memorg = table[i].memorg;
-		nand->eccreq = table[i].eccreq;
+		nanddev_set_ecc_requirements(nand, &table[i].eccreq);
 		spinand->eccinfo = table[i].eccinfo;
 		spinand->flags = table[i].flags;
 		spinand->id.len = 1 + table[i].devid.len;
@@ -1090,8 +1090,8 @@ static int spinand_init(struct spinand_device *spinand)
 	mtd->oobavail = ret;
 
 	/* Propagate ECC information to mtd_info */
-	mtd->ecc_strength = nand->eccreq.strength;
-	mtd->ecc_step_size = nand->eccreq.step_size;
+	mtd->ecc_strength = nanddev_get_ecc_conf(nand)->strength;
+	mtd->ecc_step_size = nanddev_get_ecc_conf(nand)->step_size;
 
 	return 0;
 
diff --git a/drivers/mtd/nand/spi/gigadevice.c b/drivers/mtd/nand/spi/gigadevice.c
index d219c970042a..33c67403c4aa 100644
--- a/drivers/mtd/nand/spi/gigadevice.c
+++ b/drivers/mtd/nand/spi/gigadevice.c
@@ -21,7 +21,7 @@
 #define GD5FXGQ4UXFXXG_STATUS_ECC_UNCOR_ERROR	(7 << 4)
 
 static SPINAND_OP_VARIANTS(read_cache_variants,
-		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 1, NULL, 0),
 		SPINAND_PAGE_READ_FROM_CACHE_X4_OP(0, 1, NULL, 0),
 		SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
 		SPINAND_PAGE_READ_FROM_CACHE_X2_OP(0, 1, NULL, 0),
@@ -29,7 +29,7 @@ static SPINAND_OP_VARIANTS(read_cache_variants,
 		SPINAND_PAGE_READ_FROM_CACHE_OP(false, 0, 1, NULL, 0));
 
 static SPINAND_OP_VARIANTS(read_cache_variants_f,
-		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 2, NULL, 0),
+		SPINAND_PAGE_READ_FROM_CACHE_QUADIO_OP(0, 1, NULL, 0),
 		SPINAND_PAGE_READ_FROM_CACHE_X4_OP_3A(0, 1, NULL, 0),
 		SPINAND_PAGE_READ_FROM_CACHE_DUALIO_OP(0, 1, NULL, 0),
 		SPINAND_PAGE_READ_FROM_CACHE_X2_OP_3A(0, 1, NULL, 0),
@@ -132,6 +132,35 @@ static const struct mtd_ooblayout_ops gd5fxgq4_variant2_ooblayout = {
 	.free = gd5fxgq4_variant2_ooblayout_free,
 };
 
+static int gd5fxgq4xc_ooblayout_256_ecc(struct mtd_info *mtd, int section,
+					struct mtd_oob_region *oobregion)
+{
+	if (section)
+		return -ERANGE;
+
+	oobregion->offset = 128;
+	oobregion->length = 128;
+
+	return 0;
+}
+
+static int gd5fxgq4xc_ooblayout_256_free(struct mtd_info *mtd, int section,
+					 struct mtd_oob_region *oobregion)
+{
+	if (section)
+		return -ERANGE;
+
+	oobregion->offset = 1;
+	oobregion->length = 127;
+
+	return 0;
+}
+
+static const struct mtd_ooblayout_ops gd5fxgq4xc_oob_256_ops = {
+	.ecc = gd5fxgq4xc_ooblayout_256_ecc,
+	.free = gd5fxgq4xc_ooblayout_256_free,
+};
+
 static int gd5fxgq4uexxg_ecc_get_status(struct spinand_device *spinand,
 					u8 status)
 {
@@ -202,7 +231,7 @@ static const struct spinand_info gigadevice_spinand_table[] = {
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
 					      &write_cache_variants,
 					      &update_cache_variants),
-		     0,
+		     SPINAND_HAS_QE_BIT,
 		     SPINAND_ECCINFO(&gd5fxgq4xa_ooblayout,
 				     gd5fxgq4xa_ecc_get_status)),
 	SPINAND_INFO("GD5F2GQ4xA",
@@ -212,7 +241,7 @@ static const struct spinand_info gigadevice_spinand_table[] = {
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
 					      &write_cache_variants,
 					      &update_cache_variants),
-		     0,
+		     SPINAND_HAS_QE_BIT,
 		     SPINAND_ECCINFO(&gd5fxgq4xa_ooblayout,
 				     gd5fxgq4xa_ecc_get_status)),
 	SPINAND_INFO("GD5F4GQ4xA",
@@ -222,9 +251,29 @@ static const struct spinand_info gigadevice_spinand_table[] = {
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
 					      &write_cache_variants,
 					      &update_cache_variants),
-		     0,
+		     SPINAND_HAS_QE_BIT,
 		     SPINAND_ECCINFO(&gd5fxgq4xa_ooblayout,
 				     gd5fxgq4xa_ecc_get_status)),
+	SPINAND_INFO("GD5F4GQ4RC",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE, 0xa4, 0x68),
+		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants_f,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     SPINAND_HAS_QE_BIT,
+		     SPINAND_ECCINFO(&gd5fxgq4xc_oob_256_ops,
+				     gd5fxgq4ufxxg_ecc_get_status)),
+	SPINAND_INFO("GD5F4GQ4UC",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE, 0xb4, 0x68),
+		     NAND_MEMORG(1, 4096, 256, 64, 2048, 40, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants_f,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     SPINAND_HAS_QE_BIT,
+		     SPINAND_ECCINFO(&gd5fxgq4xc_oob_256_ops,
+				     gd5fxgq4ufxxg_ecc_get_status)),
 	SPINAND_INFO("GD5F1GQ4UExxG",
 		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_ADDR, 0xd1),
 		     NAND_MEMORG(1, 2048, 128, 64, 1024, 20, 1, 1, 1),
@@ -232,7 +281,7 @@ static const struct spinand_info gigadevice_spinand_table[] = {
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
 					      &write_cache_variants,
 					      &update_cache_variants),
-		     0,
+		     SPINAND_HAS_QE_BIT,
 		     SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout,
 				     gd5fxgq4uexxg_ecc_get_status)),
 	SPINAND_INFO("GD5F1GQ4UFxxG",
@@ -242,7 +291,7 @@ static const struct spinand_info gigadevice_spinand_table[] = {
 		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants_f,
 					      &write_cache_variants,
 					      &update_cache_variants),
-		     0,
+		     SPINAND_HAS_QE_BIT,
 		     SPINAND_ECCINFO(&gd5fxgq4_variant2_ooblayout,
 				     gd5fxgq4ufxxg_ecc_get_status)),
 };
diff --git a/drivers/mtd/nand/spi/macronix.c b/drivers/mtd/nand/spi/macronix.c
index 0f900f3aa21a..8e801e4c3a00 100644
--- a/drivers/mtd/nand/spi/macronix.c
+++ b/drivers/mtd/nand/spi/macronix.c
@@ -84,10 +84,11 @@ static int mx35lf1ge4ab_ecc_get_status(struct spinand_device *spinand,
 		 * data around if it's not necessary.
 		 */
 		if (mx35lf1ge4ab_get_eccsr(spinand, &eccsr))
-			return nand->eccreq.strength;
+			return nanddev_get_ecc_conf(nand)->strength;
 
-		if (WARN_ON(eccsr > nand->eccreq.strength || !eccsr))
-			return nand->eccreq.strength;
+		if (WARN_ON(eccsr > nanddev_get_ecc_conf(nand)->strength ||
+			    !eccsr))
+			return nanddev_get_ecc_conf(nand)->strength;
 
 		return eccsr;
 
@@ -118,6 +119,26 @@ static const struct spinand_info macronix_spinand_table[] = {
 					      &update_cache_variants),
 		     SPINAND_HAS_QE_BIT,
 		     SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout, NULL)),
+	SPINAND_INFO("MX31LF1GE4BC",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x1e),
+		     NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0 /*SPINAND_HAS_QE_BIT*/,
+		     SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout,
+				     mx35lf1ge4ab_ecc_get_status)),
+	SPINAND_INFO("MX31UF1GE4BC",
+		     SPINAND_ID(SPINAND_READID_METHOD_OPCODE_DUMMY, 0x9e),
+		     NAND_MEMORG(1, 2048, 64, 64, 1024, 20, 1, 1, 1),
+		     NAND_ECCREQ(8, 512),
+		     SPINAND_INFO_OP_VARIANTS(&read_cache_variants,
+					      &write_cache_variants,
+					      &update_cache_variants),
+		     0 /*SPINAND_HAS_QE_BIT*/,
+		     SPINAND_ECCINFO(&mx35lfxge4ab_ooblayout,
+				     mx35lf1ge4ab_ecc_get_status)),
 };
 
 static const struct spinand_manufacturer_ops macronix_spinand_manuf_ops = {
diff --git a/drivers/mtd/nand/spi/toshiba.c b/drivers/mtd/nand/spi/toshiba.c
index bc801d83343e..21fde2875674 100644
--- a/drivers/mtd/nand/spi/toshiba.c
+++ b/drivers/mtd/nand/spi/toshiba.c
@@ -90,12 +90,12 @@ static int tx58cxgxsxraix_ecc_get_status(struct spinand_device *spinand,
 		 * data around if it's not necessary.
 		 */
 		if (spi_mem_exec_op(spinand->spimem, &op))
-			return nand->eccreq.strength;
+			return nanddev_get_ecc_conf(nand)->strength;
 
 		mbf >>= 4;
 
-		if (WARN_ON(mbf > nand->eccreq.strength || !mbf))
-			return nand->eccreq.strength;
+		if (WARN_ON(mbf > nanddev_get_ecc_conf(nand)->strength || !mbf))
+			return nanddev_get_ecc_conf(nand)->strength;
 
 		return mbf;
 
diff --git a/drivers/mtd/parsers/Kconfig b/drivers/mtd/parsers/Kconfig
index f98363c9b363..e72354322f62 100644
--- a/drivers/mtd/parsers/Kconfig
+++ b/drivers/mtd/parsers/Kconfig
@@ -12,7 +12,7 @@ config MTD_BCM47XX_PARTS
 	  boards.
 
 config MTD_BCM63XX_PARTS
-	tristate "BCM63XX CFE partitioning parser"
+	bool "BCM63XX CFE partitioning parser"
 	depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST
 	select CRC32
 	select MTD_PARSER_IMAGETAG
diff --git a/drivers/mtd/spi-nor/controllers/intel-spi-pci.c b/drivers/mtd/spi-nor/controllers/intel-spi-pci.c
index c72aa1ab71ad..555fe55d14ae 100644
--- a/drivers/mtd/spi-nor/controllers/intel-spi-pci.c
+++ b/drivers/mtd/spi-nor/controllers/intel-spi-pci.c
@@ -73,6 +73,7 @@ static const struct pci_device_id intel_spi_pci_ids[] = {
 	{ PCI_VDEVICE(INTEL, 0x43a4), (unsigned long)&cnl_info },
 	{ PCI_VDEVICE(INTEL, 0x4b24), (unsigned long)&bxt_info },
 	{ PCI_VDEVICE(INTEL, 0x4da4), (unsigned long)&bxt_info },
+	{ PCI_VDEVICE(INTEL, 0x7aa4), (unsigned long)&cnl_info },
 	{ PCI_VDEVICE(INTEL, 0xa0a4), (unsigned long)&bxt_info },
 	{ PCI_VDEVICE(INTEL, 0xa1a4), (unsigned long)&bxt_info },
 	{ PCI_VDEVICE(INTEL, 0xa224), (unsigned long)&bxt_info },
diff --git a/drivers/mtd/spi-nor/macronix.c b/drivers/mtd/spi-nor/macronix.c
index f97f3d127575..9203abaac229 100644
--- a/drivers/mtd/spi-nor/macronix.c
+++ b/drivers/mtd/spi-nor/macronix.c
@@ -50,7 +50,7 @@ static const struct flash_info macronix_parts[] = {
 	{ "mx25u4035",   INFO(0xc22533, 0, 64 * 1024,   8, SECT_4K) },
 	{ "mx25u8035",   INFO(0xc22534, 0, 64 * 1024,  16, SECT_4K) },
 	{ "mx25u6435f",  INFO(0xc22537, 0, 64 * 1024, 128, SECT_4K) },
-	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
+	{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, SECT_4K) },
 	{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
 	{ "mx25r1635f",  INFO(0xc22815, 0, 64 * 1024,  32,
 			      SECT_4K | SPI_NOR_DUAL_READ |
diff --git a/drivers/mtd/spi-nor/winbond.c b/drivers/mtd/spi-nor/winbond.c
index 6dcde15fb1aa..e5dfa786f190 100644
--- a/drivers/mtd/spi-nor/winbond.c
+++ b/drivers/mtd/spi-nor/winbond.c
@@ -63,6 +63,15 @@ static const struct flash_info winbond_parts[] = {
 	{ "w25q32jwm", INFO(0xef8016, 0, 64 * 1024,  64,
 			    SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
 			    SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
+	{ "w25q64jwm", INFO(0xef8017, 0, 64 * 1024, 128,
+			    SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			    SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
+	{ "w25q128jwm", INFO(0xef8018, 0, 64 * 1024, 256,
+			    SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			    SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
+	{ "w25q256jwm", INFO(0xef8019, 0, 64 * 1024, 512,
+			    SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
+			    SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) },
 	{ "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
 	{ "w25q64", INFO(0xef4017, 0, 64 * 1024, 128,
 			 SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
diff --git a/include/linux/mtd/hyperbus.h b/include/linux/mtd/hyperbus.h
index 2129f7d3b6eb..0ce612428aea 100644
--- a/include/linux/mtd/hyperbus.h
+++ b/include/linux/mtd/hyperbus.h
@@ -8,6 +8,17 @@
 
 #include <linux/mtd/map.h>
 
+/* HyperBus command bits */
+#define HYPERBUS_RW	0x80	/* R/W# */
+#define HYPERBUS_RW_WRITE 0
+#define HYPERBUS_RW_READ 0x80
+#define HYPERBUS_AS	0x40	/* Address Space */
+#define HYPERBUS_AS_MEM	0
+#define HYPERBUS_AS_REG	0x40
+#define HYPERBUS_BT	0x20	/* Burst Type */
+#define HYPERBUS_BT_WRAPPED 0
+#define HYPERBUS_BT_LINEAR 0x20
+
 enum hyperbus_memtype {
 	HYPERFLASH,
 	HYPERRAM,
@@ -20,6 +31,7 @@ enum hyperbus_memtype {
  * @mtd: pointer to MTD struct
  * @ctlr: pointer to HyperBus controller struct
  * @memtype: type of memory device: HyperFlash or HyperRAM
+ * @priv: pointer to controller specific per device private data
  */
 
 struct hyperbus_device {
@@ -28,6 +40,7 @@ struct hyperbus_device {
 	struct mtd_info *mtd;
 	struct hyperbus_ctlr *ctlr;
 	enum hyperbus_memtype memtype;
+	void *priv;
 };
 
 /**
diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h
index af99041ceaa9..697ea2474a7c 100644
--- a/include/linux/mtd/nand.h
+++ b/include/linux/mtd/nand.h
@@ -83,7 +83,18 @@ struct nand_pos {
 };
 
 /**
+ * enum nand_page_io_req_type - Direction of an I/O request
+ * @NAND_PAGE_READ: from the chip, to the controller
+ * @NAND_PAGE_WRITE: from the controller, to the chip
+ */
+enum nand_page_io_req_type {
+	NAND_PAGE_READ = 0,
+	NAND_PAGE_WRITE,
+};
+
+/**
  * struct nand_page_io_req - NAND I/O request object
+ * @type: the type of page I/O: read or write
  * @pos: the position this I/O request is targeting
  * @dataoffs: the offset within the page
  * @datalen: number of data bytes to read from/write to this page
@@ -99,6 +110,7 @@ struct nand_pos {
  * specific commands/operations.
  */
 struct nand_page_io_req {
+	enum nand_page_io_req_type type;
 	struct nand_pos pos;
 	unsigned int dataoffs;
 	unsigned int datalen;
@@ -115,18 +127,77 @@ struct nand_page_io_req {
 	int mode;
 };
 
+const struct mtd_ooblayout_ops *nand_get_small_page_ooblayout(void);
+const struct mtd_ooblayout_ops *nand_get_large_page_ooblayout(void);
+const struct mtd_ooblayout_ops *nand_get_large_page_hamming_ooblayout(void);
+
+/**
+ * enum nand_ecc_engine_type - NAND ECC engine type
+ * @NAND_ECC_ENGINE_TYPE_INVALID: Invalid value
+ * @NAND_ECC_ENGINE_TYPE_NONE: No ECC correction
+ * @NAND_ECC_ENGINE_TYPE_SOFT: Software ECC correction
+ * @NAND_ECC_ENGINE_TYPE_ON_HOST: On host hardware ECC correction
+ * @NAND_ECC_ENGINE_TYPE_ON_DIE: On chip hardware ECC correction
+ */
+enum nand_ecc_engine_type {
+	NAND_ECC_ENGINE_TYPE_INVALID,
+	NAND_ECC_ENGINE_TYPE_NONE,
+	NAND_ECC_ENGINE_TYPE_SOFT,
+	NAND_ECC_ENGINE_TYPE_ON_HOST,
+	NAND_ECC_ENGINE_TYPE_ON_DIE,
+};
+
+/**
+ * enum nand_ecc_placement - NAND ECC bytes placement
+ * @NAND_ECC_PLACEMENT_UNKNOWN: The actual position of the ECC bytes is unknown
+ * @NAND_ECC_PLACEMENT_OOB: The ECC bytes are located in the OOB area
+ * @NAND_ECC_PLACEMENT_INTERLEAVED: Syndrome layout, there are ECC bytes
+ *                                  interleaved with regular data in the main
+ *                                  area
+ */
+enum nand_ecc_placement {
+	NAND_ECC_PLACEMENT_UNKNOWN,
+	NAND_ECC_PLACEMENT_OOB,
+	NAND_ECC_PLACEMENT_INTERLEAVED,
+};
+
+/**
+ * enum nand_ecc_algo - NAND ECC algorithm
+ * @NAND_ECC_ALGO_UNKNOWN: Unknown algorithm
+ * @NAND_ECC_ALGO_HAMMING: Hamming algorithm
+ * @NAND_ECC_ALGO_BCH: Bose-Chaudhuri-Hocquenghem algorithm
+ * @NAND_ECC_ALGO_RS: Reed-Solomon algorithm
+ */
+enum nand_ecc_algo {
+	NAND_ECC_ALGO_UNKNOWN,
+	NAND_ECC_ALGO_HAMMING,
+	NAND_ECC_ALGO_BCH,
+	NAND_ECC_ALGO_RS,
+};
+
 /**
  * struct nand_ecc_props - NAND ECC properties
+ * @engine_type: ECC engine type
+ * @placement: OOB placement (if relevant)
+ * @algo: ECC algorithm (if relevant)
  * @strength: ECC strength
  * @step_size: Number of bytes per step
+ * @flags: Misc properties
  */
 struct nand_ecc_props {
+	enum nand_ecc_engine_type engine_type;
+	enum nand_ecc_placement placement;
+	enum nand_ecc_algo algo;
 	unsigned int strength;
 	unsigned int step_size;
+	unsigned int flags;
 };
 
 #define NAND_ECCREQ(str, stp) { .strength = (str), .step_size = (stp) }
 
+/* NAND ECC misc flags */
+#define NAND_ECC_MAXIMIZE_STRENGTH BIT(0)
+
 /**
  * struct nand_bbt - bad block table object
  * @cache: in memory BBT cache
@@ -158,10 +229,79 @@ struct nand_ops {
 };
 
 /**
+ * struct nand_ecc_context - Context for the ECC engine
+ * @conf: basic ECC engine parameters
+ * @total: total number of bytes used for storing ECC codes, this is used by
+ *         generic OOB layouts
+ * @priv: ECC engine driver private data
+ */
+struct nand_ecc_context {
+	struct nand_ecc_props conf;
+	unsigned int total;
+	void *priv;
+};
+
+/**
+ * struct nand_ecc_engine_ops - ECC engine operations
+ * @init_ctx: given a desired user configuration for the pointed NAND device,
+ *            requests the ECC engine driver to setup a configuration with
+ *            values it supports.
+ * @cleanup_ctx: clean the context initialized by @init_ctx.
+ * @prepare_io_req: is called before reading/writing a page to prepare the I/O
+ *                  request to be performed with ECC correction.
+ * @finish_io_req: is called after reading/writing a page to terminate the I/O
+ *                 request and ensure proper ECC correction.
+ */
+struct nand_ecc_engine_ops {
+	int (*init_ctx)(struct nand_device *nand);
+	void (*cleanup_ctx)(struct nand_device *nand);
+	int (*prepare_io_req)(struct nand_device *nand,
+			      struct nand_page_io_req *req);
+	int (*finish_io_req)(struct nand_device *nand,
+			     struct nand_page_io_req *req);
+};
+
+/**
+ * struct nand_ecc_engine - ECC engine abstraction for NAND devices
+ * @ops: ECC engine operations
+ */
+struct nand_ecc_engine {
+	struct nand_ecc_engine_ops *ops;
+};
+
+void of_get_nand_ecc_user_config(struct nand_device *nand);
+int nand_ecc_init_ctx(struct nand_device *nand);
+void nand_ecc_cleanup_ctx(struct nand_device *nand);
+int nand_ecc_prepare_io_req(struct nand_device *nand,
+			    struct nand_page_io_req *req);
+int nand_ecc_finish_io_req(struct nand_device *nand,
+			   struct nand_page_io_req *req);
+bool nand_ecc_is_strong_enough(struct nand_device *nand);
+
+/**
+ * struct nand_ecc - Information relative to the ECC
+ * @defaults: Default values, depend on the underlying subsystem
+ * @requirements: ECC requirements from the NAND chip perspective
+ * @user_conf: User desires in terms of ECC parameters
+ * @ctx: ECC context for the ECC engine, derived from the device @requirements
+ *       the @user_conf and the @defaults
+ * @ondie_engine: On-die ECC engine reference, if any
+ * @engine: ECC engine actually bound
+ */
+struct nand_ecc {
+	struct nand_ecc_props defaults;
+	struct nand_ecc_props requirements;
+	struct nand_ecc_props user_conf;
+	struct nand_ecc_context ctx;
+	struct nand_ecc_engine *ondie_engine;
+	struct nand_ecc_engine *engine;
+};
+
+/**
  * struct nand_device - NAND device
  * @mtd: MTD instance attached to the NAND device
  * @memorg: memory layout
- * @eccreq: ECC requirements
+ * @ecc: NAND ECC object attached to the NAND device
  * @rowconv: position to row address converter
  * @bbt: bad block table info
  * @ops: NAND operations attached to the NAND device
@@ -169,8 +309,8 @@ struct nand_ops {
  * Generic NAND object. Specialized NAND layers (raw NAND, SPI NAND, OneNAND)
  * should declare their own NAND object embedding a nand_device struct (that's
  * how inheritance is done).
- * struct_nand_device->memorg and struct_nand_device->eccreq should be filled
- * at device detection time to reflect the NAND device
+ * struct_nand_device->memorg and struct_nand_device->ecc.requirements should
+ * be filled at device detection time to reflect the NAND device
  * capabilities/requirements. Once this is done nanddev_init() can be called.
  * It will take care of converting NAND information into MTD ones, which means
  * the specialized NAND layers should never manually tweak
@@ -179,7 +319,7 @@ struct nand_ops {
 struct nand_device {
 	struct mtd_info mtd;
 	struct nand_memory_organization memorg;
-	struct nand_ecc_props eccreq;
+	struct nand_ecc ecc;
 	struct nand_row_converter rowconv;
 	struct nand_bbt bbt;
 	const struct nand_ops *ops;
@@ -383,6 +523,40 @@ nanddev_get_memorg(struct nand_device *nand)
 	return &nand->memorg;
 }
 
+/**
+ * nanddev_get_ecc_conf() - Extract the ECC configuration from a NAND device
+ * @nand: NAND device
+ */
+static inline const struct nand_ecc_props *
+nanddev_get_ecc_conf(struct nand_device *nand)
+{
+	return &nand->ecc.ctx.conf;
+}
+
+/**
+ * nanddev_get_ecc_requirements() - Extract the ECC requirements from a NAND
+ *                                  device
+ * @nand: NAND device
+ */
+static inline const struct nand_ecc_props *
+nanddev_get_ecc_requirements(struct nand_device *nand)
+{
+	return &nand->ecc.requirements;
+}
+
+/**
+ * nanddev_set_ecc_requirements() - Assign the ECC requirements of a NAND
+ *                                  device
+ * @nand: NAND device
+ * @reqs: Requirements
+ */
+static inline void
+nanddev_set_ecc_requirements(struct nand_device *nand,
+			     const struct nand_ecc_props *reqs)
+{
+	nand->ecc.requirements = *reqs;
+}
+
 int nanddev_init(struct nand_device *nand, const struct nand_ops *ops,
 		 struct module *owner);
 void nanddev_cleanup(struct nand_device *nand);
@@ -624,11 +798,13 @@ static inline void nanddev_pos_next_page(struct nand_device *nand,
  * layer.
  */
 static inline void nanddev_io_iter_init(struct nand_device *nand,
+					enum nand_page_io_req_type reqtype,
 					loff_t offs, struct mtd_oob_ops *req,
 					struct nand_io_iter *iter)
 {
 	struct mtd_info *mtd = nanddev_to_mtd(nand);
 
+	iter->req.type = reqtype;
 	iter->req.mode = req->mode;
 	iter->req.dataoffs = nanddev_offs_to_pos(nand, offs, &iter->req.pos);
 	iter->req.ooboffs = req->ooboffs;
@@ -698,8 +874,8 @@ static inline bool nanddev_io_iter_end(struct nand_device *nand,
  *
  * Should be used for iterate over pages that are contained in an MTD request.
  */
-#define nanddev_io_for_each_page(nand, start, req, iter)		\
-	for (nanddev_io_iter_init(nand, start, req, iter);		\
+#define nanddev_io_for_each_page(nand, type, start, req, iter)		\
+	for (nanddev_io_iter_init(nand, type, start, req, iter);	\
 	     !nanddev_io_iter_end(nand, iter);				\
 	     nanddev_io_iter_next_page(nand, iter))
 
diff --git a/include/linux/mtd/pfow.h b/include/linux/mtd/pfow.h
index 6166e7c60869..146413d4bdb7 100644
--- a/include/linux/mtd/pfow.h
+++ b/include/linux/mtd/pfow.h
@@ -121,37 +121,4 @@ static inline void send_pfow_command(struct map_info *map,
 	map_write(map, CMD(LPDDR_START_EXECUTION),
 			map->pfow_base + PFOW_COMMAND_EXECUTE);
 }
-
-static inline void print_drs_error(unsigned dsr)
-{
-	int prog_status = (dsr & DSR_RPS) >> 8;
-
-	if (!(dsr & DSR_AVAILABLE))
-		printk(KERN_NOTICE"DSR.15: (0) Device not Available\n");
-	if (prog_status & 0x03)
-		printk(KERN_NOTICE"DSR.9,8: (11) Attempt to program invalid "
-						"half with 41h command\n");
-	else if (prog_status & 0x02)
-		printk(KERN_NOTICE"DSR.9,8: (10) Object Mode Program attempt "
-					"in region with Control Mode data\n");
-	else if (prog_status &  0x01)
-		printk(KERN_NOTICE"DSR.9,8: (01) Program attempt in region "
-						"with Object Mode data\n");
-	if (!(dsr & DSR_READY_STATUS))
-		printk(KERN_NOTICE"DSR.7: (0) Device is Busy\n");
-	if (dsr & DSR_ESS)
-		printk(KERN_NOTICE"DSR.6: (1) Erase Suspended\n");
-	if (dsr & DSR_ERASE_STATUS)
-		printk(KERN_NOTICE"DSR.5: (1) Erase/Blank check error\n");
-	if (dsr & DSR_PROGRAM_STATUS)
-		printk(KERN_NOTICE"DSR.4: (1) Program Error\n");
-	if (dsr & DSR_VPPS)
-		printk(KERN_NOTICE"DSR.3: (1) Vpp low detect, operation "
-					"aborted\n");
-	if (dsr & DSR_PSS)
-		printk(KERN_NOTICE"DSR.2: (1) Program suspended\n");
-	if (dsr & DSR_DPS)
-		printk(KERN_NOTICE"DSR.1: (1) Aborted Erase/Program attempt "
-					"on locked block\n");
-}
 #endif /* __LINUX_MTD_PFOW_H */
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index a725b620aca2..aac07940de09 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -14,6 +14,7 @@
 #define __LINUX_MTD_RAWNAND_H
 
 #include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
 #include <linux/mtd/flashchip.h>
 #include <linux/mtd/bbm.h>
 #include <linux/mtd/jedec.h>
@@ -81,25 +82,6 @@ struct nand_chip;
 #define NAND_DATA_IFACE_CHECK_ONLY	-1
 
 /*
- * Constants for ECC_MODES
- */
-enum nand_ecc_mode {
-	NAND_ECC_INVALID,
-	NAND_ECC_NONE,
-	NAND_ECC_SOFT,
-	NAND_ECC_HW,
-	NAND_ECC_HW_SYNDROME,
-	NAND_ECC_ON_DIE,
-};
-
-enum nand_ecc_algo {
-	NAND_ECC_UNKNOWN,
-	NAND_ECC_HAMMING,
-	NAND_ECC_BCH,
-	NAND_ECC_RS,
-};
-
-/*
  * Constants for Hardware ECC
  */
 /* Reset Hardware ECC for read */
@@ -116,7 +98,6 @@ enum nand_ecc_algo {
  * pages and you want to rely on the default implementation.
  */
 #define NAND_ECC_GENERIC_ERASED_CHECK	BIT(0)
-#define NAND_ECC_MAXIMIZE		BIT(1)
 
 /*
  * Option constants for bizarre disfunctionality and real
@@ -310,7 +291,8 @@ static const struct nand_ecc_caps __name = {			\
 
 /**
  * struct nand_ecc_ctrl - Control structure for ECC
- * @mode:	ECC mode
+ * @engine_type: ECC engine type
+ * @placement:	OOB bytes placement
  * @algo:	ECC algorithm
  * @steps:	number of ECC steps per page
  * @size:	data bytes per ECC step
@@ -338,7 +320,7 @@ static const struct nand_ecc_caps __name = {			\
  *			controller and always return contiguous in-band and
  *			out-of-band data even if they're not stored
  *			contiguously on the NAND chip (e.g.
- *			NAND_ECC_HW_SYNDROME interleaves in-band and
+ *			NAND_ECC_PLACEMENT_INTERLEAVED interleaves in-band and
  *			out-of-band data).
  * @write_page_raw:	function to write a raw page without ECC. This function
  *			should hide the specific layout used by the ECC
@@ -346,7 +328,7 @@ static const struct nand_ecc_caps __name = {			\
  *			in-band and out-of-band data. ECC controller is
  *			responsible for doing the appropriate transformations
  *			to adapt to its specific layout (e.g.
- *			NAND_ECC_HW_SYNDROME interleaves in-band and
+ *			NAND_ECC_PLACEMENT_INTERLEAVED interleaves in-band and
  *			out-of-band data).
  * @read_page:	function to read a page according to the ECC generator
  *		requirements; returns maximum number of bitflips corrected in
@@ -362,7 +344,8 @@ static const struct nand_ecc_caps __name = {			\
  * @write_oob:	function to write chip OOB data
  */
 struct nand_ecc_ctrl {
-	enum nand_ecc_mode mode;
+	enum nand_ecc_engine_type engine_type;
+	enum nand_ecc_placement placement;
 	enum nand_ecc_algo algo;
 	int steps;
 	int size;
@@ -1161,9 +1144,6 @@ struct nand_chip {
 	void *priv;
 };
 
-extern const struct mtd_ooblayout_ops nand_ooblayout_sp_ops;
-extern const struct mtd_ooblayout_ops nand_ooblayout_lp_ops;
-
 static inline struct nand_chip *mtd_to_nand(struct mtd_info *mtd)
 {
 	return container_of(mtd, struct nand_chip, base.mtd);
diff --git a/include/linux/platform_data/mtd-davinci.h b/include/linux/platform_data/mtd-davinci.h
index 03e92c71b3fa..dd474dd44848 100644
--- a/include/linux/platform_data/mtd-davinci.h
+++ b/include/linux/platform_data/mtd-davinci.h
@@ -60,15 +60,16 @@ struct davinci_nand_pdata {		/* platform_data */
 	struct mtd_partition	*parts;
 	unsigned		nr_parts;
 
-	/* none  == NAND_ECC_NONE (strongly *not* advised!!)
-	 * soft  == NAND_ECC_SOFT
-	 * else  == NAND_ECC_HW, according to ecc_bits
+	/* none  == NAND_ECC_ENGINE_TYPE_NONE (strongly *not* advised!!)
+	 * soft  == NAND_ECC_ENGINE_TYPE_SOFT
+	 * else  == NAND_ECC_ENGINE_TYPE_ON_HOST, according to ecc_bits
 	 *
 	 * All DaVinci-family chips support 1-bit hardware ECC.
 	 * Newer ones also support 4-bit ECC, but are awkward
 	 * using it with large page chips.
 	 */
-	enum nand_ecc_mode	ecc_mode;
+	enum nand_ecc_engine_type engine_type;
+	enum nand_ecc_placement ecc_placement;
 	u8			ecc_bits;
 
 	/* e.g. NAND_BUSWIDTH_16 */
diff --git a/include/linux/platform_data/mtd-nand-s3c2410.h b/include/linux/platform_data/mtd-nand-s3c2410.h
index 08675b16f9e1..25390fc3e795 100644
--- a/include/linux/platform_data/mtd-nand-s3c2410.h
+++ b/include/linux/platform_data/mtd-nand-s3c2410.h
@@ -49,7 +49,7 @@ struct s3c2410_platform_nand {
 
 	unsigned int	ignore_unset_ecc:1;
 
-	enum nand_ecc_mode	ecc_mode;
+	enum nand_ecc_engine_type engine_type;
 
 	int			nr_sets;
 	struct s3c2410_nand_set *sets;