Merge tag 'pinctrl-v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrlHEADtorvalds/mastertorvalds/HEADmaster

Pull pin control updates from Linus Walleij:
 "Nothing stands out, apart from maybe the interesting Eswin EIC7700, a
  RISC-V SoC I've never seen before.

  Core changes:

   - Open code PINCTRL_FUNCTION_DESC() instead of defining a complex
     macro only used in one place

   - Add pinmux_generic_add_pinfunction() helper and use this in a few
     drivers

  New drivers:

   - Amlogic S7, S7D and S6 pin control support

   - Eswin EIC7700 pin control support

   - Qualcomm PMIV0104, PM7550 and Milos pin control support

     Because of unhelpful numbering schemes, the Qualcomm driver now
     needs to start to rely on SoC codenames

   - STM32 HDP pin control support

   - Mediatek MT8189 pin control support

  Improvements:

   - Switch remaining pin control drivers over to the new GPIO set
     callback that provides a return value

   - Support RSVD (reserved) pins in the STM32 driver

   - Move many fixed assignments over to pinctrl_desc definitions

   - Handle multiple TLMM regions in the Qualcomm driver"

* tag 'pinctrl-v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (105 commits)
  pinctrl: mediatek: Add pinctrl driver for mt8189
  dt-bindings: pinctrl: mediatek: Add support for mt8189
  pinctrl: aspeed-g6: Add PCIe RC PERST pin group
  pinctrl: ingenic: use pinmux_generic_add_pinfunction()
  pinctrl: keembay: use pinmux_generic_add_pinfunction()
  pinctrl: mediatek: moore: use pinmux_generic_add_pinfunction()
  pinctrl: airoha: use pinmux_generic_add_pinfunction()
  pinctrl: equilibrium: use pinmux_generic_add_pinfunction()
  pinctrl: provide pinmux_generic_add_pinfunction()
  pinctrl: pinmux: open-code PINCTRL_FUNCTION_DESC()
  pinctrl: ma35: use new GPIO line value setter callbacks
  MAINTAINERS: add Clément Le Goffic as STM32 HDP maintainer
  pinctrl: stm32: Introduce HDP driver
  dt-bindings: pinctrl: stm32: Introduce HDP
  pinctrl: qcom: Add Milos pinctrl driver
  dt-bindings: pinctrl: document the Milos Top Level Mode Multiplexer
  pinctrl: qcom: spmi: Add PM7550
  dt-bindings: pinctrl: qcom,pmic-gpio: Add PM7550 support
  pinctrl: qcom: spmi: Add PMIV0104
  dt-bindings: pinctrl: qcom,pmic-gpio: Add PMIV0104 support
  ...

10 files changed, 806 insertions, 73 deletions

diff --git a/Documentation/devicetree/bindings/pinctrl/amlogic,pinctrl-a4.yaml b/Documentation/devicetree/bindings/pinctrl/amlogic,pinctrl-a4.yaml
index a6ef4797e5c5..6ba66c2033b4 100644
--- a/Documentation/devicetree/bindings/pinctrl/amlogic,pinctrl-a4.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/amlogic,pinctrl-a4.yaml
@@ -15,11 +15,18 @@ allOf:
 properties:
   compatible:
     oneOf:
-      - const: amlogic,pinctrl-a4
+      - enum:
+          - amlogic,pinctrl-a4
+          - amlogic,pinctrl-s6
+          - amlogic,pinctrl-s7
       - items:
           - enum:
               - amlogic,pinctrl-a5
           - const: amlogic,pinctrl-a4
+      - items:
+          - enum:
+              - amlogic,pinctrl-s7d
+          - const: amlogic,pinctrl-s7
 
   "#address-cells":
     const: 2
diff --git a/Documentation/devicetree/bindings/pinctrl/eswin,eic7700-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/eswin,eic7700-pinctrl.yaml
new file mode 100644
index 000000000000..d46e7ee6372d
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/eswin,eic7700-pinctrl.yaml
@@ -0,0 +1,156 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/eswin,eic7700-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Eswin Eic7700 Pinctrl
+
+maintainers:
+  - Yulin Lu <luyulin@eswincomputing.com>
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+description: |
+  eic7700 pin configuration nodes act as a container for an arbitrary number of
+  subnodes. Each of these subnodes represents some desired configuration for one or
+  more pins. This configuration can include the mux function to select on those pin(s),
+  and various pin configuration parameters, such as input-enable, pull-up, etc.
+
+properties:
+  compatible:
+    const: eswin,eic7700-pinctrl
+
+  reg:
+    maxItems: 1
+
+  vrgmii-supply:
+    description:
+      Regulator supply for the RGMII interface IO power domain.
+      This property should reference a regulator that provides either 1.8V or 3.3V,
+      depending on the board-level voltage configuration required by the RGMII interface.
+
+patternProperties:
+  '-grp$':
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      '-pins$':
+        type: object
+
+        properties:
+          pins:
+            description:
+              For eic7700, specifies the name(s) of one or more pins to be configured by
+              this node.
+            items:
+              enum: [ chip_mode, mode_set0, mode_set1, mode_set2, mode_set3, xin,
+                      rst_out_n, key_reset_n, gpio0, por_sel, jtag0_tck, jtag0_tms,
+                      jtag0_tdi, jtag0_tdo, gpio5, spi2_cs0_n, jtag1_tck, jtag1_tms,
+                      jtag1_tdi, jtag1_tdo, gpio11, spi2_cs1_n, pcie_clkreq_n,
+                      pcie_wake_n, pcie_perst_n, hdmi_scl, hdmi_sda, hdmi_cec,
+                      jtag2_trst, rgmii0_clk_125, rgmii0_txen, rgmii0_txclk,
+                      rgmii0_txd0, rgmii0_txd1, rgmii0_txd2, rgmii0_txd3, i2s0_bclk,
+                      i2s0_wclk, i2s0_sdi, i2s0_sdo, i2s_mclk, rgmii0_rxclk,
+                      rgmii0_rxdv, rgmii0_rxd0, rgmii0_rxd1, rgmii0_rxd2, rgmii0_rxd3,
+                      i2s2_bclk, i2s2_wclk, i2s2_sdi, i2s2_sdo, gpio27, gpio28, gpio29,
+                      rgmii0_mdc, rgmii0_mdio, rgmii0_intb, rgmii1_clk_125, rgmii1_txen,
+                      rgmii1_txclk, rgmii1_txd0, rgmii1_txd1, rgmii1_txd2, rgmii1_txd3,
+                      i2s1_bclk, i2s1_wclk, i2s1_sdi, i2s1_sdo, gpio34, rgmii1_rxclk,
+                      rgmii1_rxdv, rgmii1_rxd0, rgmii1_rxd1, rgmii1_rxd2, rgmii1_rxd3,
+                      spi1_cs0_n, spi1_clk, spi1_d0, spi1_d1, spi1_d2, spi1_d3, spi1_cs1_n,
+                      rgmii1_mdc, rgmii1_mdio, rgmii1_intb, usb0_pwren, usb1_pwren,
+                      i2c0_scl, i2c0_sda, i2c1_scl, i2c1_sda, i2c2_scl, i2c2_sda,
+                      i2c3_scl, i2c3_sda, i2c4_scl, i2c4_sda, i2c5_scl, i2c5_sda,
+                      uart0_tx, uart0_rx, uart1_tx, uart1_rx, uart1_cts, uart1_rts,
+                      uart2_tx, uart2_rx, jtag2_tck, jtag2_tms, jtag2_tdi, jtag2_tdo,
+                      fan_pwm, fan_tach, mipi_csi0_xvs, mipi_csi0_xhs, mipi_csi0_mclk,
+                      mipi_csi1_xvs, mipi_csi1_xhs, mipi_csi1_mclk, mipi_csi2_xvs,
+                      mipi_csi2_xhs, mipi_csi2_mclk, mipi_csi3_xvs, mipi_csi3_xhs,
+                      mipi_csi3_mclk, mipi_csi4_xvs, mipi_csi4_xhs, mipi_csi4_mclk,
+                      mipi_csi5_xvs, mipi_csi5_xhs, mipi_csi5_mclk, spi3_cs_n, spi3_clk,
+                      spi3_di, spi3_do, gpio92, gpio93, s_mode, gpio95, spi0_cs_n,
+                      spi0_clk, spi0_d0, spi0_d1, spi0_d2, spi0_d3, i2c10_scl,
+                      i2c10_sda, i2c11_scl, i2c11_sda, gpio106, boot_sel0, boot_sel1,
+                      boot_sel2, boot_sel3, gpio111, lpddr_ref_clk ]
+
+          function:
+            description:
+              Specify the alternative function to be configured for the
+              given pins.
+            enum: [ disabled, boot_sel, chip_mode, emmc, fan_tach,
+                    gpio, hdmi, i2c, i2s, jtag, ddr_ref_clk_sel,
+                    lpddr_ref_clk, mipi_csi, osc, pcie, pwm,
+                    rgmii, reset, sata, sdio, spi, s_mode, uart, usb ]
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+          bias-disable: true
+
+          bias-pull-down: true
+
+          bias-pull-up: true
+
+          input-enable: true
+
+          input-disable: true
+
+          drive-strength-microamp: true
+
+        required:
+          - pins
+
+        additionalProperties: false
+
+        allOf:
+          - $ref: pincfg-node.yaml#
+          - $ref: pinmux-node.yaml#
+
+          - if:
+              properties:
+                pins:
+                  anyOf:
+                    - pattern: '^rgmii'
+                    - const: lpddr_ref_clk
+            then:
+              properties:
+                drive-strength-microamp:
+                  enum: [3000, 6000, 9000, 12000, 15000, 18000, 21000, 24000]
+            else:
+              properties:
+                drive-strength-microamp:
+                  enum: [6000, 9000, 12000, 15000, 18000, 21000, 24000, 27000]
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    pinctrl@51600080 {
+      compatible = "eswin,eic7700-pinctrl";
+      reg = <0x51600080 0x1fff80>;
+      vrgmii-supply = <&vcc_1v8>;
+
+      dev-active-grp {
+        /* group node defining 1 standard pin */
+        gpio10-pins {
+          pins = "jtag1_tdo";
+          function = "gpio";
+          input-enable;
+          bias-pull-up;
+        };
+
+        /* group node defining 2 I2C pins */
+        i2c6-pins {
+          pins = "uart1_cts", "uart1_rts";
+          function = "i2c";
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8189-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8189-pinctrl.yaml
new file mode 100644
index 000000000000..32e4653da5db
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8189-pinctrl.yaml
@@ -0,0 +1,213 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt8189-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MediaTek MT8189 Pin Controller
+
+maintainers:
+  - Lei Xue <lei.xue@mediatek.com>
+  - Cathy Xu <ot_cathy.xu@mediatek.com>
+
+description:
+  The MediaTek's MT8189 Pin controller is used to control SoC pins.
+
+properties:
+  compatible:
+    const: mediatek,mt8189-pinctrl
+
+  reg:
+    items:
+      - description: gpio base
+      - description: lm group IO
+      - description: rb0 group IO
+      - description: rb1 group IO
+      - description: bm0 group IO
+      - description: bm1 group IO
+      - description: bm2 group IO
+      - description: lt0 group IO
+      - description: lt1 group IO
+      - description: rt group IO
+      - description: eint0 group IO
+      - description: eint1 group IO
+      - description: eint2 group IO
+      - description: eint3 group IO
+      - description: eint4 group IO
+
+  reg-names:
+    items:
+      - const: base
+      - const: lm
+      - const: rb0
+      - const: rb1
+      - const: bm0
+      - const: bm1
+      - const: bm2
+      - const: lt0
+      - const: lt1
+      - const: rt
+      - const: eint0
+      - const: eint1
+      - const: eint2
+      - const: eint3
+      - const: eint4
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    const: 2
+
+  gpio-ranges:
+    maxItems: 1
+
+  gpio-line-names: true
+
+# PIN CONFIGURATION NODES
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      '^pins':
+        type: object
+        $ref: /schemas/pinctrl/pincfg-node.yaml
+        additionalProperties: false
+        description:
+          A pinctrl node should contain at least one subnode representing the
+          pinctrl groups available on the machine. Each subnode will list the
+          pins it needs, and how they should be configured, with regard to muxer
+          configuration, pullups, drive strength, input enable/disable and input
+          schmitt.
+
+        properties:
+          pinmux:
+            description:
+              Integer array, represents gpio pin number and mux setting.
+              Supported pin number and mux varies for different SoCs, and are
+              defined as macros in arch/arm64/boot/dts/mediatek/mt8189-pinfunc.h
+              directly, for this SoC.
+
+          drive-strength:
+            enum: [2, 4, 6, 8, 10, 12, 14, 16]
+
+          bias-pull-down:
+            oneOf:
+              - type: boolean
+              - enum: [100, 101, 102, 103]
+                description: mt8189 pull down PUPD/R0/R1 type define value.
+              - enum: [75000, 5000]
+                description: mt8189 pull down RSEL type si unit value(ohm).
+            description: |
+              For pull down type is normal, it doesn't need add R1R0 define
+              and resistance value.
+
+              For pull down type is PUPD/R0/R1 type, it can add R1R0 define to
+              set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+              "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
+              "MTK_PUPD_SET_R1R0_11" define in mt8189.
+
+              For pull down type is PD/RSEL, it can add resistance value(ohm)
+              to set different resistance by identifying property
+              "mediatek,rsel-resistance-in-si-unit".
+
+          bias-pull-up:
+            oneOf:
+              - type: boolean
+              - enum: [100, 101, 102, 103]
+                description: mt8189 pull up PUPD/R0/R1 type define value.
+              - enum: [1000, 1500, 2000, 3000, 4000, 5000, 75000]
+                description: mt8189 pull up RSEL type si unit value(ohm).
+            description: |
+              For pull up type is normal, it don't need add R1R0 define
+              and resistance value.
+
+              For pull up type is PUPD/R0/R1 type, it can add R1R0 define to
+              set different resistance. It can support "MTK_PUPD_SET_R1R0_00" &
+              "MTK_PUPD_SET_R1R0_01" & "MTK_PUPD_SET_R1R0_10" &
+              "MTK_PUPD_SET_R1R0_11" define in mt8189.
+
+              For pull up type is PU/RSEL, it can add resistance value(ohm)
+              to set different resistance by identifying property
+              "mediatek,rsel-resistance-in-si-unit".
+
+          bias-disable: true
+
+          output-high: true
+
+          output-low: true
+
+          input-enable: true
+
+          input-disable: true
+
+          input-schmitt-enable: true
+
+          input-schmitt-disable: true
+
+        required:
+          - pinmux
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+  - gpio-ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/pinctrl/mt65xx.h>
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #define PINMUX_GPIO51__FUNC_SCL0 (MTK_PIN_NO(51) | 2)
+    #define PINMUX_GPIO52__FUNC_SDA0 (MTK_PIN_NO(52) | 2)
+
+    pio: pinctrl@10005000 {
+        compatible = "mediatek,mt8189-pinctrl";
+        reg = <0x10005000 0x1000>,
+              <0x11b50000 0x1000>,
+              <0x11c50000 0x1000>,
+              <0x11c60000 0x1000>,
+              <0x11d20000 0x1000>,
+              <0x11d30000 0x1000>,
+              <0x11d40000 0x1000>,
+              <0x11e20000 0x1000>,
+              <0x11e30000 0x1000>,
+              <0x11f20000 0x1000>,
+              <0x11ce0000 0x1000>,
+              <0x11de0000 0x1000>,
+              <0x11e60000 0x1000>,
+              <0x1c01e000 0x1000>,
+              <0x11f00000 0x1000>;
+        reg-names = "base", "lm", "rb0", "rb1", "bm0" , "bm1",
+                    "bm2", "lt0", "lt1", "rt", "eint0", "eint1",
+                    "eint2", "eint3", "eint4";
+        gpio-controller;
+        #gpio-cells = <2>;
+        gpio-ranges = <&pio 0 0 182>;
+        interrupt-controller;
+        interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH 0>;
+        #interrupt-cells = <2>;
+
+        i2c0-pins {
+            pins {
+                pinmux = <PINMUX_GPIO51__FUNC_SCL0>,
+                         <PINMUX_GPIO52__FUNC_SDA0>;
+                bias-disable;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/nxp,lpc1850-scu.txt b/Documentation/devicetree/bindings/pinctrl/nxp,lpc1850-scu.txt
deleted file mode 100644
index bd8b0c69fa44..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/nxp,lpc1850-scu.txt
+++ /dev/null
@@ -1,71 +0,0 @@
-NXP LPC18xx/43xx SCU pin controller Device Tree Bindings
---------------------------------------------------------
-
-Required properties:
-- compatible		: Should be "nxp,lpc1850-scu"
-- reg			: Address and length of the register set for the device
-- clocks		: Clock specifier (see clock bindings for details)
-
-The lpc1850-scu driver uses the generic pin multiplexing and generic pin
-configuration documented in pinctrl-bindings.txt.
-
-The following generic nodes are supported:
- - function
- - pins
- - bias-disable
- - bias-pull-up
- - bias-pull-down
- - drive-strength
- - input-enable
- - input-disable
- - input-schmitt-enable
- - input-schmitt-disable
- - slew-rate
-
-NXP specific properties:
- - nxp,gpio-pin-interrupt : Assign pin to gpio pin interrupt controller
-			    irq number 0 to 7. See example below.
-
-Not all pins support all properties so either refer to the NXP 1850/4350
-user manual or the pin table in the pinctrl-lpc18xx driver for supported
-pin properties.
-
-Example:
-pinctrl: pinctrl@40086000 {
-	compatible = "nxp,lpc1850-scu";
-	reg = <0x40086000 0x1000>;
-	clocks = <&ccu1 CLK_CPU_SCU>;
-
-	i2c0_pins: i2c0-pins {
-		i2c0_pins_cfg {
-			pins = "i2c0_scl", "i2c0_sda";
-			function = "i2c0";
-			input-enable;
-		};
-	};
-
-	uart0_pins: uart0-pins {
-		uart0_rx_cfg {
-			pins = "pf_11";
-			function = "uart0";
-			bias-disable;
-			input-enable;
-		};
-
-		uart0_tx_cfg {
-			pins = "pf_10";
-			function = "uart0";
-			bias-disable;
-		};
-	};
-
-	gpio_joystick_pins: gpio-joystick-pins {
-		gpio_joystick_1_cfg {
-			pins =  "p9_0";
-			function = "gpio";
-			nxp,gpio-pin-interrupt = <0>;
-			input-enable;
-			bias-disable;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/pinctrl/nxp,lpc1850-scu.yaml b/Documentation/devicetree/bindings/pinctrl/nxp,lpc1850-scu.yaml
new file mode 100644
index 000000000000..11f41359b5c8
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nxp,lpc1850-scu.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nxp,lpc1850-scu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC18xx/43xx SCU pin controller
+
+description:
+  Not all pins support all pin generic node properties so either refer to
+  the NXP 1850/4350 user manual or the pin table in the pinctrl-lpc18xx
+  driver for supported pin properties.
+
+maintainers:
+  - Frank Li <Frank.Li@nxp.com>
+
+properties:
+  compatible:
+    const: nxp,lpc1850-scu
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+patternProperties:
+  '-pins$':
+    type: object
+    additionalProperties: false
+
+    patternProperties:
+      '_cfg$':
+        type: object
+
+        allOf:
+          - $ref: pincfg-node.yaml#
+          - $ref: pinmux-node.yaml#
+
+        unevaluatedProperties: false
+
+        properties:
+          nxp,gpio-pin-interrupt:
+            $ref: /schemas/types.yaml#/definitions/uint32
+            minimum: 0
+            maximum: 7
+            description:
+              Assign pin to gpio pin interrupt controller
+              irq number 0 to 7. See example below.
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+allOf:
+  - $ref: pinctrl.yaml#
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/lpc18xx-ccu.h>
+
+    pinctrl@40086000 {
+        compatible = "nxp,lpc1850-scu";
+        reg = <0x40086000 0x1000>;
+        clocks = <&ccu1 CLK_CPU_SCU>;
+
+        gpio-joystick-pins {
+            gpio-joystick-1_cfg {
+                pins = "p9_0";
+                function = "gpio";
+                nxp,gpio-pin-interrupt = <0>;
+                input-enable;
+                bias-disable;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,milos-tlmm.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,milos-tlmm.yaml
new file mode 100644
index 000000000000..0091204df20a
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,milos-tlmm.yaml
@@ -0,0 +1,133 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,milos-tlmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. Milos TLMM block
+
+maintainers:
+  - Luca Weiss <luca.weiss@fairphone.com>
+
+description:
+  Top Level Mode Multiplexer pin controller in Qualcomm Milos SoC.
+
+allOf:
+  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+  compatible:
+    const: qcom,milos-tlmm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  gpio-reserved-ranges:
+    minItems: 1
+    maxItems: 84
+
+  gpio-line-names:
+    maxItems: 167
+
+patternProperties:
+  "-state$":
+    oneOf:
+      - $ref: "#/$defs/qcom-milos-tlmm-state"
+      - patternProperties:
+          "-pins$":
+            $ref: "#/$defs/qcom-milos-tlmm-state"
+        additionalProperties: false
+
+$defs:
+  qcom-milos-tlmm-state:
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+    unevaluatedProperties: false
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          oneOf:
+            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-5][0-9]|16[0-7])$"
+            - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ]
+        minItems: 1
+        maxItems: 36
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ gpio, aoss_cti, atest_char, atest_usb, audio_ext_mclk0,
+                audio_ext_mclk1, audio_ref_clk, cam_mclk, cci_async_in0,
+                cci_i2c_scl, cci_i2c_sda, cci_timer, coex_uart1_rx,
+                coex_uart1_tx, dbg_out_clk, ddr_bist_complete, ddr_bist_fail,
+                ddr_bist_start, ddr_bist_stop, ddr_pxi0, ddr_pxi1, dp0_hot,
+                egpio, gcc_gp1, gcc_gp2, gcc_gp3, host2wlan_sol, i2s0_data0,
+                i2s0_data1, i2s0_sck, i2s0_ws, ibi_i3c, jitter_bist, mdp_vsync,
+                mdp_vsync0_out, mdp_vsync1_out, mdp_vsync2_out, mdp_vsync3_out,
+                mdp_vsync_e, nav_gpio0, nav_gpio1, nav_gpio2, pcie0_clk_req_n,
+                pcie1_clk_req_n, phase_flag, pll_bist_sync, pll_clk_aux,
+                prng_rosc0, prng_rosc1, prng_rosc2, prng_rosc3, qdss_cti,
+                qdss_gpio, qlink0_enable, qlink0_request, qlink0_wmss,
+                qlink1_enable, qlink1_request, qlink1_wmss, qspi0, qup0_se0,
+                qup0_se1, qup0_se2, qup0_se3, qup0_se4, qup0_se5, qup0_se6,
+                qup1_se0, qup1_se1, qup1_se2, qup1_se3, qup1_se4, qup1_se5,
+                qup1_se6, resout_gpio_n, sd_write_protect, sdc1_clk, sdc1_cmd,
+                sdc1_data, sdc1_rclk, sdc2_clk, sdc2_cmd, sdc2_data,
+                sdc2_fb_clk, tb_trig_sdc1, tb_trig_sdc2, tgu_ch0_trigout,
+                tgu_ch1_trigout, tmess_prng0, tmess_prng1, tmess_prng2,
+                tmess_prng3, tsense_pwm1, tsense_pwm2, uim0_clk, uim0_data,
+                uim0_present, uim0_reset, uim1_clk_mira, uim1_clk_mirb,
+                uim1_data_mira, uim1_data_mirb, uim1_present_mira,
+                uim1_present_mirb, uim1_reset_mira, uim1_reset_mirb, usb0_hs,
+                usb0_phy_ps, vfr_0, vfr_1, vsense_trigger_mirnat, wcn_sw,
+                wcn_sw_ctrl ]
+
+    required:
+      - pins
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    tlmm: pinctrl@f100000 {
+        compatible = "qcom,milos-tlmm";
+        reg = <0x0f100000 0x300000>;
+
+        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+
+        gpio-controller;
+        #gpio-cells = <2>;
+
+        interrupt-controller;
+        #interrupt-cells = <2>;
+
+        gpio-ranges = <&tlmm 0 0 168>;
+
+        gpio-wo-state {
+            pins = "gpio1";
+            function = "gpio";
+        };
+
+        qup-uart5-default-state {
+            pins = "gpio25", "gpio26";
+            function = "qup0_se5";
+            drive-strength = <2>;
+            bias-disable;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
index 055cea5452eb..5e6dfcc3fe9b 100644
--- a/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,pmic-gpio.yaml
@@ -27,6 +27,7 @@ properties:
           - qcom,pm6450-gpio
           - qcom,pm7250b-gpio
           - qcom,pm7325-gpio
+          - qcom,pm7550-gpio
           - qcom,pm7550ba-gpio
           - qcom,pm8005-gpio
           - qcom,pm8018-gpio
@@ -64,6 +65,7 @@ properties:
           - qcom,pmi8994-gpio
           - qcom,pmi8998-gpio
           - qcom,pmih0108-gpio
+          - qcom,pmiv0104-gpio
           - qcom,pmk8350-gpio
           - qcom,pmk8550-gpio
           - qcom,pmm8155au-gpio
@@ -228,6 +230,7 @@ allOf:
               - qcom,pmc8180-gpio
               - qcom,pmc8380-gpio
               - qcom,pmi8994-gpio
+              - qcom,pmiv0104-gpio
               - qcom,pmm8155au-gpio
     then:
       properties:
@@ -261,6 +264,7 @@ allOf:
               - qcom,pm660l-gpio
               - qcom,pm6150l-gpio
               - qcom,pm7250b-gpio
+              - qcom,pm7550-gpio
               - qcom,pm8038-gpio
               - qcom,pm8150b-gpio
               - qcom,pm8150l-gpio
diff --git a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml
index 960758dc417f..125af766b992 100644
--- a/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/rockchip,pinctrl.yaml
@@ -135,7 +135,7 @@ additionalProperties:
               description:
                 Pin bank index.
             - minimum: 0
-              maximum: 13
+              maximum: 14
               description:
                 Mux 0 means GPIO and mux 1 to N means
                 the specific device function.
diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-hdp.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-hdp.yaml
new file mode 100644
index 000000000000..845b6b7b7552
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-hdp.yaml
@@ -0,0 +1,187 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) STMicroelectronics 2025.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/st,stm32-hdp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STM32 Hardware Debug Port Mux/Config
+
+maintainers:
+  - Clément LE GOFFIC <legoffic.clement@gmail.com>
+
+description:
+  STMicroelectronics's STM32 MPUs integrate a Hardware Debug Port (HDP).
+  It allows to output internal signals on SoC's GPIO.
+
+properties:
+  compatible:
+    enum:
+      - st,stm32mp131-hdp
+      - st,stm32mp151-hdp
+      - st,stm32mp251-hdp
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+patternProperties:
+  "^hdp[0-7]-pins$":
+    type: object
+    $ref: pinmux-node.yaml#
+    additionalProperties: false
+
+    properties:
+      pins:
+        pattern: '^HDP[0-7]$'
+
+      function: true
+
+    required:
+      - function
+      - pins
+
+allOf:
+  - $ref: pinctrl.yaml#
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32mp131-hdp
+    then:
+      patternProperties:
+        "^hdp[0-7]-pins$":
+          properties:
+            function:
+              enum: [ pwr_pwrwake_sys, pwr_stop_forbidden, pwr_stdby_wakeup, pwr_encomp_vddcore,
+                      bsec_out_sec_niden, aiec_sys_wakeup, none, ddrctrl_lp_req,
+                      pwr_ddr_ret_enable_n, dts_clk_ptat, sram3ctrl_tamp_erase_act, gpoval0,
+                      pwr_sel_vth_vddcpu, pwr_mpu_ram_lowspeed, ca7_naxierrirq, pwr_okin_mr,
+                      bsec_out_sec_dbgen, aiec_c1_wakeup, rcc_pwrds_mpu, ddrctrl_dfi_ctrlupd_req,
+                      ddrctrl_cactive_ddrc_asr, sram3ctrl_hw_erase_act, nic400_s0_bready, gpoval1,
+                      pwr_pwrwake_mpu, pwr_mpu_clock_disable_ack, ca7_ndbgreset_i,
+                      bsec_in_rstcore_n, bsec_out_sec_bsc_dis, ddrctrl_dfi_init_complete,
+                      ddrctrl_perf_op_is_refresh, ddrctrl_gskp_dfi_lp_req, sram3ctrl_sw_erase_act,
+                      nic400_s0_bvalid, gpoval2, pwr_sel_vth_vddcore, pwr_mpu_clock_disable_req,
+                      ca7_npmuirq0, ca7_nfiqout0, bsec_out_sec_dftlock, bsec_out_sec_jtag_dis,
+                      rcc_pwrds_sys, sram3ctrl_tamp_erase_req, ddrctrl_stat_ddrc_reg_selfref_type0,
+                      dts_valobus1_0, dts_valobus2_0, tamp_potential_tamp_erfcfg, nic400_s0_wready,
+                      nic400_s0_rready, gpoval3, pwr_stop2_active, ca7_nl2reset_i,
+                      ca7_npreset_varm_i, bsec_out_sec_dften, bsec_out_sec_dbgswenable,
+                      eth1_out_pmt_intr_o, eth2_out_pmt_intr_o, ddrctrl_stat_ddrc_reg_selfref_type1,
+                      ddrctrl_cactive_0, dts_valobus1_1, dts_valobus2_1, tamp_nreset_sram_ercfg,
+                      nic400_s0_wlast, nic400_s0_rlast, gpoval4, ca7_standbywfil2,
+                      pwr_vth_vddcore_ack, ca7_ncorereset_i, ca7_nirqout0, bsec_in_pwrok,
+                      bsec_out_sec_deviceen, eth1_out_lpi_intr_o, eth2_out_lpi_intr_o,
+                      ddrctrl_cactive_ddrc, ddrctrl_wr_credit_cnt, dts_valobus1_2, dts_valobus2_2,
+                      pka_pka_itamp_out, nic400_s0_wvalid, nic400_s0_rvalid, gpoval5,
+                      ca7_standbywfe0, pwr_vth_vddcpu_ack, ca7_evento, bsec_in_tamper_det,
+                      bsec_out_sec_spniden, eth1_out_mac_speed_o1, eth2_out_mac_speed_o1,
+                      ddrctrl_csysack_ddrc, ddrctrl_lpr_credit_cnt, dts_valobus1_3, dts_valobus2_3,
+                      saes_tamper_out, nic400_s0_awready, nic400_s0_arready, gpoval6,
+                      ca7_standbywfi0, pwr_rcc_vcpu_rdy, ca7_eventi, ca7_dbgack0, bsec_out_fuse_ok,
+                      bsec_out_sec_spiden, eth1_out_mac_speed_o0, eth2_out_mac_speed_o0,
+                      ddrctrl_csysreq_ddrc, ddrctrl_hpr_credit_cnt, dts_valobus1_4, dts_valobus2_4,
+                      rng_tamper_out, nic400_s0_awavalid, nic400_s0_aravalid, gpoval7 ]
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32mp151-hdp
+    then:
+      patternProperties:
+        "^hdp[0-7]-pins$":
+          properties:
+            function:
+              enum: [ pwr_pwrwake_sys, cm4_sleepdeep, pwr_stdby_wkup, pwr_encomp_vddcore,
+                      bsec_out_sec_niden, none, rcc_cm4_sleepdeep, gpu_dbg7, ddrctrl_lp_req,
+                      pwr_ddr_ret_enable_n, dts_clk_ptat, gpoval0, pwr_pwrwake_mcu, cm4_halted,
+                      ca7_naxierrirq, pwr_okin_mr, bsec_out_sec_dbgen, exti_sys_wakeup,
+                      rcc_pwrds_mpu, gpu_dbg6, ddrctrl_dfi_ctrlupd_req, ddrctrl_cactive_ddrc_asr,
+                      gpoval1, pwr_pwrwake_mpu, cm4_rxev, ca7_npmuirq1, ca7_nfiqout1,
+                      bsec_in_rstcore_n, exti_c2_wakeup, rcc_pwrds_mcu, gpu_dbg5,
+                      ddrctrl_dfi_init_complete, ddrctrl_perf_op_is_refresh,
+                      ddrctrl_gskp_dfi_lp_req, gpoval2, pwr_sel_vth_vddcore, cm4_txev, ca7_npmuirq0,
+                      ca7_nfiqout0, bsec_out_sec_dftlock, exti_c1_wakeup, rcc_pwrds_sys, gpu_dbg4,
+                      ddrctrl_stat_ddrc_reg_selfref_type0, ddrctrl_cactive_1, dts_valobus1_0,
+                      dts_valobus2_0, gpoval3, pwr_mpu_pdds_not_cstbydis, cm4_sleeping, ca7_nreset1,
+                      ca7_nirqout1, bsec_out_sec_dften, bsec_out_sec_dbgswenable,
+                      eth_out_pmt_intr_o, gpu_dbg3, ddrctrl_stat_ddrc_reg_selfref_type1,
+                      ddrctrl_cactive_0, dts_valobus1_1, dts_valobus2_1, gpoval4, ca7_standbywfil2,
+                      pwr_vth_vddcore_ack, ca7_nreset0, ca7_nirqout0, bsec_in_pwrok,
+                      bsec_out_sec_deviceen, eth_out_lpi_intr_o, gpu_dbg2, ddrctrl_cactive_ddrc,
+                      ddrctrl_wr_credit_cnt, dts_valobus1_2, dts_valobus2_2, gpoval5,
+                      ca7_standbywfi1, ca7_standbywfe1, ca7_evento, ca7_dbgack1,
+                      bsec_out_sec_spniden, eth_out_mac_speed_o1, gpu_dbg1, ddrctrl_csysack_ddrc,
+                      ddrctrl_lpr_credit_cnt, dts_valobus1_3, dts_valobus2_3, gpoval6,
+                      ca7_standbywfi0, ca7_standbywfe0, ca7_dbgack0, bsec_out_fuse_ok,
+                      bsec_out_sec_spiden, eth_out_mac_speed_o0, gpu_dbg0, ddrctrl_csysreq_ddrc,
+                      ddrctrl_hpr_credit_cnt, dts_valobus1_4, dts_valobus2_4, gpoval7 ]
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32mp251-hdp
+    then:
+      patternProperties:
+        "^hdp[0-7]-pins$":
+          properties:
+            function:
+              enum: [ pwr_pwrwake_sys, cpu2_sleep_deep, bsec_out_tst_sdr_unlock_or_disable_scan,
+                      bsec_out_nidenm, bsec_out_nidena, cpu2_state_0, rcc_pwrds_sys, gpu_dbg7,
+                      ddrss_csysreq_ddrc, ddrss_dfi_phyupd_req, cpu3_sleep_deep,
+                      d2_gbl_per_clk_bus_req, pcie_usb_cxpl_debug_info_ei_0,
+                      pcie_usb_cxpl_debug_info_ei_8, d3_state_0, gpoval0, pwr_pwrwake_cpu2,
+                      cpu2_halted, cpu2_state_1, bsec_out_dbgenm, bsec_out_dbgena, exti1_sys_wakeup,
+                      rcc_pwrds_cpu2, gpu_dbg6, ddrss_csysack_ddrc, ddrss_dfi_phymstr_req,
+                      cpu3_halted, d2_gbl_per_dma_req, pcie_usb_cxpl_debug_info_ei_1,
+                      pcie_usb_cxpl_debug_info_ei_9, d3_state_1, gpoval1, pwr_pwrwake_cpu1,
+                      cpu2_rxev, cpu1_npumirq1, cpu1_nfiqout1, bsec_out_shdbgen, exti1_cpu2_wakeup,
+                      rcc_pwrds_cpu1, gpu_dbg5, ddrss_cactive_ddrc, ddrss_dfi_lp_req, cpu3_rxev,
+                      hpdma1_clk_bus_req, pcie_usb_cxpl_debug_info_ei_2,
+                      pcie_usb_cxpl_debug_info_ei_10, d3_state_2, gpoval2, pwr_sel_vth_vddcpu,
+                      cpu2_txev, cpu1_npumirq0, cpu1_nfiqout0, bsec_out_ddbgen, exti1_cpu1_wakeup,
+                      cpu3_state_0, gpu_dbg4, ddrss_mcdcg_en, ddrss_dfi_freq_0, cpu3_txev,
+                      hpdma2_clk_bus_req, pcie_usb_cxpl_debug_info_ei_3,
+                      pcie_usb_cxpl_debug_info_ei_11, d1_state_0, gpoval3, pwr_sel_vth_vddcore,
+                      cpu2_sleeping, cpu1_evento, cpu1_nirqout1, bsec_out_spnidena, exti2_d3_wakeup,
+                      eth1_out_pmt_intr_o, gpu_dbg3, ddrss_dphycg_en, ddrss_obsp0, cpu3_sleeping,
+                      hpdma3_clk_bus_req, pcie_usb_cxpl_debug_info_ei_4,
+                      pcie_usb_cxpl_debug_info_ei_12, d1_state_1, gpoval4, cpu1_standby_wfil2,
+                      none, cpu1_nirqout0, bsec_out_spidena, exti2_cpu3_wakeup, eth1_out_lpi_intr_o,
+                      gpu_dbg2, ddrctrl_dfi_init_start, ddrss_obsp1, cpu3_state_1,
+                      d3_gbl_per_clk_bus_req, pcie_usb_cxpl_debug_info_ei_5,
+                      pcie_usb_cxpl_debug_info_ei_13, d1_state_2, gpoval5, cpu1_standby_wfi1,
+                      cpu1_standby_wfe1, cpu1_halted1, cpu1_naxierrirq, bsec_out_spnidenm,
+                      exti2_cpu2_wakeup, eth2_out_pmt_intr_o, gpu_dbg1, ddrss_dfi_init_complete,
+                      ddrss_obsp2, d2_state_0, d3_gbl_per_dma_req, pcie_usb_cxpl_debug_info_ei_6,
+                      pcie_usb_cxpl_debug_info_ei_14, cpu1_state_0, gpoval6, cpu1_standby_wfi0,
+                      cpu1_standby_wfe0, cpu1_halted0, bsec_out_spidenm, exti2_cpu1__wakeup,
+                      eth2_out_lpi_intr_o, gpu_dbg0, ddrss_dfi_ctrlupd_req, ddrss_obsp3, d2_state_1,
+                      lpdma1_clk_bus_req, pcie_usb_cxpl_debug_info_ei_7,
+                      pcie_usb_cxpl_debug_info_ei_15, cpu1_state_1, gpoval7 ]
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+
+    pinctrl@54090000 {
+      compatible = "st,stm32mp151-hdp";
+      reg = <0x54090000 0x400>;
+      clocks = <&rcc HDP>;
+      pinctrl-names = "default";
+      pinctrl-0 = <&hdp2_gpo>;
+      hdp2_gpo: hdp2-pins {
+        function = "gpoval2";
+        pins = "HDP2";
+      };
+    };
diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
index a28d77748095..961161c2ab62 100644
--- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
@@ -32,13 +32,16 @@ properties:
 
   '#address-cells':
     const: 1
+
   '#size-cells':
     const: 1
 
   ranges: true
+
   pins-are-numbered:
     $ref: /schemas/types.yaml#/definitions/flag
     deprecated: true
+
   hwlocks: true
 
   interrupts:
@@ -67,22 +70,29 @@ patternProperties:
     additionalProperties: false
     properties:
       gpio-controller: true
+
       '#gpio-cells':
         const: 2
+
       interrupt-controller: true
       '#interrupt-cells':
         const: 2
 
       reg:
         maxItems: 1
+
       clocks:
         maxItems: 1
+
       resets:
         maxItems: 1
+
       gpio-line-names: true
+
       gpio-ranges:
         minItems: 1
         maxItems: 16
+
       ngpios:
         description:
           Number of available gpios in a bank.
@@ -160,9 +170,13 @@ patternProperties:
               * ...
               * 16 : Alternate Function 15
               * 17 : Analog
+              * 18 : Reserved
               To simplify the usage, macro is available to generate "pinmux" field.
               This macro is available here:
                 - include/dt-bindings/pinctrl/stm32-pinfunc.h
+              Setting the pinmux's function to the Reserved (RSVD) value is used to inform
+              the driver that it shall not apply the mux setting. This can be used to
+              reserve some pins, for example to a co-processor not running Linux.
               Some examples of using macro:
                /* GPIO A9 set as alternate function 2 */
                ... {
@@ -176,21 +190,32 @@ patternProperties:
                ... {
                           pinmux = <STM32_PINMUX('A', 9, ANALOG)>;
                };
+               /* GPIO A9 reserved for co-processor */
+               ... {
+                          pinmux = <STM32_PINMUX('A', 9, RSVD)>;
+               };
 
           bias-disable:
             type: boolean
+
           bias-pull-down:
             type: boolean
+
           bias-pull-up:
             type: boolean
+
           drive-push-pull:
             type: boolean
+
           drive-open-drain:
             type: boolean
+
           output-low:
             type: boolean
+
           output-high:
             type: boolean
+
           slew-rate:
             description: |
               0: Low speed