gpiolib: support shared GPIOs in core subsystem code

As the final step in adding official support for shared GPIOs, enable
the previously added elements in core GPIO subsystem code. Set-up shared
GPIOs when adding a GPIO chip, tear it down on removal and check if a
GPIO descriptor looked up during the firmware-node stage is shared and
fall-back to machine lookup in this case.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20251112-gpio-shared-v4-5-b51f97b1abd8@linaro.org
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>

1 files changed, 41 insertions, 9 deletions

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 9952e412da50..1e4c99179712 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -37,6 +37,7 @@
 #include "gpiolib-acpi.h"
 #include "gpiolib-cdev.h"
 #include "gpiolib-of.h"
+#include "gpiolib-shared.h"
 #include "gpiolib-swnode.h"
 #include "gpiolib-sysfs.h"
 #include "gpiolib.h"
@@ -1200,6 +1201,10 @@ int gpiochip_add_data_with_key(struct gpio_chip *gc, void *data,
 	if (ret)
 		goto err_remove_irqchip_mask;
 
+	ret = gpio_device_setup_shared(gdev);
+	if (ret)
+		goto err_remove_irqchip;
+
 	/*
 	 * By first adding the chardev, and then adding the device,
 	 * we get a device node entry in sysfs under
@@ -1211,10 +1216,13 @@ int gpiochip_add_data_with_key(struct gpio_chip *gc, void *data,
 	if (gpiolib_initialized) {
 		ret = gpiochip_setup_dev(gdev);
 		if (ret)
-			goto err_remove_irqchip;
+			goto err_teardown_shared;
 	}
+
 	return 0;
 
+err_teardown_shared:
+	gpio_device_teardown_shared(gdev);
 err_remove_irqchip:
 	gpiochip_irqchip_remove(gc);
 err_remove_irqchip_mask:
@@ -1283,6 +1291,7 @@ void gpiochip_remove(struct gpio_chip *gc)
 	/* Numb the device, cancelling all outstanding operations */
 	rcu_assign_pointer(gdev->chip, NULL);
 	synchronize_srcu(&gdev->srcu);
+	gpio_device_teardown_shared(gdev);
 	gpiochip_irqchip_remove(gc);
 	acpi_gpiochip_remove(gc);
 	of_gpiochip_remove(gc);
@@ -4652,11 +4661,29 @@ struct gpio_desc *gpiod_find_and_request(struct device *consumer,
 	scoped_guard(srcu, &gpio_devices_srcu) {
 		desc = gpiod_fwnode_lookup(fwnode, consumer, con_id, idx,
 					   &flags, &lookupflags);
+		if (!IS_ERR_OR_NULL(desc) &&
+		    test_bit(GPIOD_FLAG_SHARED, &desc->flags)) {
+			/*
+			 * We're dealing with a GPIO shared by multiple
+			 * consumers. This is the moment to add the machine
+			 * lookup table for the proxy device as previously
+			 * we only knew the consumer's fwnode.
+			 */
+			ret = gpio_shared_add_proxy_lookup(consumer, lookupflags);
+			if (ret)
+				return ERR_PTR(ret);
+
+			/* Trigger platform lookup for shared GPIO proxy. */
+			desc = ERR_PTR(-ENOENT);
+			/* Trigger it even for fwnode-only gpiod_get(). */
+			platform_lookup_allowed = true;
+		}
+
 		if (gpiod_not_found(desc) && platform_lookup_allowed) {
 			/*
 			 * Either we are not using DT or ACPI, or their lookup
-			 * did not return a result. In that case, use platform
-			 * lookup as a fallback.
+			 * did not return a result or this is a shared GPIO. In
+			 * that case, use platform lookup as a fallback.
 			 */
 			dev_dbg(consumer,
 				"using lookup tables for GPIO lookup\n");
@@ -4679,14 +4706,19 @@ struct gpio_desc *gpiod_find_and_request(struct device *consumer,
 			return ERR_PTR(ret);
 
 		/*
-		 * This happens when there are several consumers for
-		 * the same GPIO line: we just return here without
-		 * further initialization. It is a bit of a hack.
-		 * This is necessary to support fixed regulators.
+		 * This happens when there are several consumers for the same
+		 * GPIO line: we just return here without further
+		 * initialization. It's a hack introduced long ago to support
+		 * fixed regulators. We now have a better solution with
+		 * automated scanning where affected platforms just need to
+		 * select the provided Kconfig option.
 		 *
-		 * FIXME: Make this more sane and safe.
+		 * FIXME: Remove the GPIOD_FLAGS_BIT_NONEXCLUSIVE flag after
+		 * making sure all platforms use the new mechanism.
 		 */
-		dev_info(consumer, "nonexclusive access to GPIO for %s\n", name);
+		dev_info(consumer,
+			 "nonexclusive access to GPIO for %s, consider updating your code to using gpio-shared-proxy\n",
+			 name);
 		return desc;
 	}