Merge tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull pci updates from Bjorn Helgaas:
 "Enumeration:

   - Add PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() macros that
     take config space accessor functions.

     Implement pci_find_capability(), pci_find_ext_capability(), and
     dwc, dwc endpoint, and cadence capability search interfaces with
     them (Hans Zhang)

   - Leave parent unit address 0 in 'interrupt-map' so that when we
     build devicetree nodes to describe PCI functions that contain
     multiple peripherals, we can build this property even when
     interrupt controllers lack 'reg' properties (Lorenzo Pieralisi)

   - Add a Xeon 6 quirk to disable Extended Tags and limit Max Read
     Request Size to 128B to avoid a performance issue (Ilpo Järvinen)

   - Add sysfs 'serial_number' file to expose the Device Serial Number
     (Matthew Wood)

   - Fix pci_acpi_preserve_config() memory leak (Nirmoy Das)

  Resource management:

   - Align m68k pcibios_enable_device() with other arches (Ilpo
     Järvinen)

   - Remove sparc pcibios_enable_device() implementations that don't do
     anything beyond what pci_enable_resources() does (Ilpo Järvinen)

   - Remove mips pcibios_enable_resources() and use
     pci_enable_resources() instead (Ilpo Järvinen)

   - Clean up bridge window sizing and assignment (Ilpo Järvinen),
     including:

       - Leave non-claimed bridge windows disabled

       - Enable bridges even if a window wasn't assigned because not all
         windows are required by downstream devices

       - Preserve bridge window type when releasing the resource, since
         the type is needed for reassignment

       - Consolidate selection of bridge windows into two new
         interfaces, pbus_select_window() and
         pbus_select_window_for_type(), so this is done consistently

       - Compute bridge window start and end earlier to avoid logging
         stale information

  MSI:

   - Add quirk to disable MSI on RDC PCI to PCIe bridges (Marcos Del Sol
     Vives)

  Error handling:

   - Align AER with EEH by allowing drivers to request a Bus Reset on
     Non-Fatal Errors (in addition to the reset on Fatal Errors that we
     already do) (Lukas Wunner)

   - If error recovery fails, emit FAILED_RECOVERY uevents for the
     devices, not for the bridge leading to them.

     This makes them correspond to BEGIN_RECOVERY uevents (Lukas Wunner)

   - Align AER with EEH by calling err_handler.error_detected()
     callbacks to notify drivers if error recovery fails (Lukas Wunner)

   - Align AER with EEH by restoring device error_state to
     pci_channel_io_normal before the err_handler.slot_reset() callback.

     This is earlier than before the err_handler.resume() callback
     (Lukas Wunner)

   - Emit a BEGIN_RECOVERY uevent when driver's
     err_handler.error_detected() requests a reset, as well as when it
     says recovery is complete or can be done without a reset (Niklas
     Schnelle)

   - Align s390 with AER and EEH by emitting uevents during error
     recovery (Niklas Schnelle)

   - Align EEH with AER and s390 by emitting BEGIN_RECOVERY,
     SUCCESSFUL_RECOVERY, or FAILED_RECOVERY uevents depending on the
     result of err_handler.error_detected() (Niklas Schnelle)

   - Fix a NULL pointer dereference in aer_ratelimit() when ACPI GHES
     error information identifies a device without an AER Capability
     (Breno Leitao)

   - Update error decoding and TLP Log printing for new errors in
     current PCIe base spec (Lukas Wunner)

   - Update error recovery documentation to match the current code
     and use consistent nomenclature (Lukas Wunner)

  ASPM:

   - Enable all ClockPM and ASPM states for devicetree platforms, since
     there's typically no firmware that enables ASPM

     This is a risky change that may uncover hardware or configuration
     defects at boot-time rather than when users enable ASPM via sysfs
     later. Booting with "pcie_aspm=off" prevents this enabling
     (Manivannan Sadhasivam)

   - Remove the qcom code that enabled ASPM (Manivannan Sadhasivam)

  Power management:

   - If a device has already been disconnected, e.g., by a hotplug
     removal, don't bother trying to resume it to D0 when detaching the
     driver.

     This avoids annoying "Unable to change power state from D3cold to
     D0" messages (Mario Limonciello)

   - Ensure devices are powered up before config reads for
     'max_link_width', 'current_link_speed', 'current_link_width',
     'secondary_bus_number', and 'subordinate_bus_number' sysfs files.

     This prevents using invalid data (~0) in drivers or lspci and,
     depending on how the PCIe controller reports errors, may avoid
     error interrupts or crashes (Brian Norris)

  Virtualization:

   - Add rescan/remove locking when enabling/disabling SR-IOV, which
     avoids list corruption on s390, where disabling SR-IOV also
     generates hotplug events (Niklas Schnelle)

  Peer-to-peer DMA:

   - Free struct p2p_pgmap, not a member within it, in the
     pci_p2pdma_add_resource() error path (Sungho Kim)

  Endpoint framework:

   - Document sysfs interface for BAR assignment of vNTB endpoint
     functions (Jerome Brunet)

   - Fix array underflow in endpoint BAR test case (Dan Carpenter)

   - Skip endpoint IRQ test if the IRQ is out of range to avoid false
     errors (Christian Bruel)

   - Fix endpoint test case for controllers with fixed-size BARs smaller
     than requested by the test (Marek Vasut)

   - Restore inbound translation when disabling doorbell so the endpoint
     doorbell test case can be run more than once (Niklas Cassel)

   - Avoid a NULL pointer dereference when releasing DMA channels in
     endpoint DMA test case (Shin'ichiro Kawasaki)

   - Convert tegra194 interrupt number to MSI vector to fix endpoint
     Kselftest MSI_TEST test case (Niklas Cassel)

   - Reset tegra194 BARs when running in endpoint mode so the BAR tests
     don't overwrite the ATU settings in BAR4 (Niklas Cassel)

   - Handle errors in tegra194 BPMP transactions so we don't mistakenly
     skip future PERST# assertion (Vidya Sagar)

  AMD MDB PCIe controller driver:

   - Update DT binding example to separate PERST# to a Root Port stanza
     to make multiple Root Ports possible in the future (Sai Krishna
     Musham)

   - Add driver support for PERST# being described in a Root Port
     stanza, falling back to the host bridge if not found there (Sai
     Krishna Musham)

  Freescale i.MX6 PCIe controller driver:

   - Enable the 3.3V Vaux supply if available so devices can request
     wakeup with either Beacon or WAKE# (Richard Zhu)

  MediaTek PCIe Gen3 controller driver:

   - Add optional sys clock ready time setting to avoid sys_clk_rdy
     signal glitching in MT6991 and MT8196 (AngeloGioacchino Del Regno)

   - Add DT binding and driver support for MT6991 and MT8196
     (AngeloGioacchino Del Regno)

  NVIDIA Tegra PCIe controller driver:

   - When asserting PERST#, disable the controller instead of mistakenly
     disabling the PLL twice (Nagarjuna Kristam)

   - Convert struct tegra_msi mask_lock to raw spinlock to avoid a lock
     nesting error (Marek Vasut)

  Qualcomm PCIe controller driver:

   - Select PCI Power Control Slot driver so slot voltage rails can be
     turned on/off if described in Root Port devicetree node (Qiang Yu)

   - Parse only PCI bridge child nodes in devicetree, skipping unrelated
     nodes such as OPP (Operating Performance Points), which caused
     probe failures (Krishna Chaitanya Chundru)

   - Add 8.0 GT/s and 32.0 GT/s equalization settings (Ziyue Zhang)

   - Consolidate Root Port 'phy' and 'reset' properties in struct
     qcom_pcie_port, regardless of whether we got them from the Root
     Port node or the host bridge node (Manivannan Sadhasivam)

   - Fetch and map the ELBI register space in the DWC core rather than
     in each driver individually (Krishna Chaitanya Chundru)

   - Enable ECAM mechanism in DWC core by setting up iATU with 'CFG
     Shift Feature' and use this in the qcom driver (Krishna Chaitanya
     Chundru)

   - Add SM8750 compatible to qcom,pcie-sm8550.yaml (Krishna Chaitanya
     Chundru)

   - Update qcom,pcie-x1e80100.yaml to allow fifth PCIe host on Qualcomm
     Glymur, which is compatible with X1E80100 but doesn't have the
     cnoc_sf_axi clock (Qiang Yu)

  Renesas R-Car PCIe controller driver:

   - Fix a typo that prevented correct PHY initialization (Marek Vasut)

   - Add a missing 1ms delay after PWR reset assertion as required by
     the V4H manual (Marek Vasut)

   - Assure reset has completed before DBI access to avoid SError (Marek
     Vasut)

   - Fix inverted PHY initialization check, which sometimes led to
     timeouts and failure to start the controller (Marek Vasut)

   - Pass the correct IRQ domain to generic_handle_domain_irq() to fix a
     regression when converting to msi_create_parent_irq_domain()
     (Claudiu Beznea)

   - Drop the spinlock protecting the PMSR register - it's no longer
     required since pci_lock already serializes accesses (Marek Vasut)

   - Convert struct rcar_msi mask_lock to raw spinlock to avoid a lock
     nesting error (Marek Vasut)

  SOPHGO PCIe controller driver:

   - Check for existence of struct cdns_pcie.ops before using it to
     allow Cadence drivers that don't need to supply ops (Chen Wang)

   - Add DT binding and driver for the SOPHGO SG2042 PCIe controller
     (Chen Wang)

  STMicroelectronics STM32MP25 PCIe controller driver:

   - Update pinctrl documentation of initial states and use in runtime
     suspend/resume (Christian Bruel)

   - Add pinctrl_pm_select_init_state() for use by stm32 driver, which
     needs it during resume (Christian Bruel)

   - Add devicetree bindings and drivers for the STMicroelectronics
     STM32MP25 in host and endpoint modes (Christian Bruel)

  Synopsys DesignWare PCIe controller driver:

   - Add support for x16 in devicetree 'num-lanes' property (Konrad
     Dybcio)

   - Verify that if DT specifies a single IRQ for all eDMA channels, it
     is named 'dma' (Niklas Cassel)

  TI J721E PCIe driver:

   - Add MODULE_DEVICE_TABLE() so driver can be autoloaded (Siddharth
     Vadapalli)

   - Power controller off before configuring the glue layer so the
     controller latches the correct values on power-on (Siddharth
     Vadapalli)

  TI Keystone PCIe controller driver:

   - Use devm_request_irq() so 'ks-pcie-error-irq' is freed when driver
     exits with error (Siddharth Vadapalli)

   - Add Peripheral Virtualization Unit (PVU), which restricts DMA from
     PCIe devices to specific regions of host memory, to the ti,am65
     binding (Jan Kiszka)

  Xilinx NWL PCIe controller driver:

   - Clear bootloader E_ECAM_CONTROL before merging in the new driver
     value to avoid writing invalid values (Jani Nurminen)"

* tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (141 commits)
  PCI/AER: Avoid NULL pointer dereference in aer_ratelimit()
  MAINTAINERS: Add entry for ST STM32MP25 PCIe drivers
  PCI: stm32-ep: Add PCIe Endpoint support for STM32MP25
  dt-bindings: PCI: Add STM32MP25 PCIe Endpoint bindings
  PCI: stm32: Add PCIe host support for STM32MP25
  PCI: xilinx-nwl: Fix ECAM programming
  PCI: j721e: Fix incorrect error message in probe()
  PCI: keystone: Use devm_request_irq() to free "ks-pcie-error-irq" on exit
  dt-bindings: PCI: qcom,pcie-x1e80100: Set clocks minItems for the fifth Glymur PCIe Controller
  PCI: dwc: Support 16-lane operation
  PCI: Add lockdep assertion in pci_stop_and_remove_bus_device()
  PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV
  PCI: rcar-host: Convert struct rcar_msi mask_lock into raw spinlock
  PCI: tegra194: Rename 'root_bus' to 'root_port_bus' in tegra_pcie_downstream_dev_to_D0()
  PCI: tegra: Convert struct tegra_msi mask_lock into raw spinlock
  PCI: rcar-gen4: Fix inverted break condition in PHY initialization
  PCI: rcar-gen4: Assure reset occurs before DBI access
  PCI: rcar-gen4: Add missing 1ms delay after PWR reset assertion
  PCI: Set up bridge resources earlier
  PCI: rcar-host: Drop PMSR spinlock
  ...

0 files changed, 0 insertions, 0 deletions