Merge tag 'drm-intel-next-2016-09-19' of git://anongit.freedesktop.org/drm-intel into drm-next

- refactor the sseu code (Imre)
- refine guc dmesg output (Dave Gordon)
- more vgpu work
- more skl wm fixes (Lyude)
- refactor dpll code in prep for upfront link training (Jim Bride et al)
- consolidate all platform feature checks into intel_device_info (Carlos Santa)
- refactor elsp/execlist submission as prep for re-submission after hang
  recovery and eventually scheduling (Chris Wilson)
- allow synchronous gpu reset handling, to remove tricky/impossible/fragile
  error recovery code (Chris Wilson)
- prep work for nonblocking (execlist) submission, using fences to track
  depencies and drive elsp submission (Chris Wilson)
- partial error recover/resubmission of non-guilty batches after hangs (Chris Wilson)
- full dma-buf implicit fencing support (Chris Wilson)
- dp link training fixes (Jim, Dhinkaran, Navare, ...)
- obey dp branch device pixel rate/bpc/clock limits (Mika Kahola), needed for
  many vga dongles
- bunch of small cleanups and polish all over, as usual

[airlied: printing macros collided]

* tag 'drm-intel-next-2016-09-19' of git://anongit.freedesktop.org/drm-intel: (163 commits)
  drm/i915: Update DRIVER_DATE to 20160919
  drm: Fix DisplayPort branch device ID kernel-doc
  drm/i915: use NULL for NULL pointers
  drm/i915: do not use 'false' as a NULL pointer
  drm/i915: make intel_dp_compute_bpp static
  drm: Add DP branch device info on debugfs
  drm/i915: Update bits per component for display info
  drm/i915: Check pixel rate for DP to VGA dongle
  drm/i915: Read DP branch device SW revision
  drm/i915: Read DP branch device HW revision
  drm/i915: Cleanup DisplayPort AUX channel initialization
  drm: Read DP branch device id
  drm: Helper to read max bits per component
  drm: Helper to read max clock rate
  drm: Drop VGA from bpc definitions
  drm: Add missing DP downstream port types
  drm/i915: Add ddb size field to device info structure
  drm/i915/guc: general tidying up (submission)
  drm/i915/guc: general tidying up (loader)
  drm/i915: clarify PMINTRMSK/pm_intr_keep usage
  ...

1 files changed, 65 insertions, 69 deletions

diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index 1f266d7df2ec..79aab9ad6faa 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -255,67 +255,59 @@ intel_gpio_setup(struct intel_gmbus *bus, unsigned int pin)
 	algo->data = bus;
 }
 
-static int
-gmbus_wait_hw_status(struct drm_i915_private *dev_priv,
-		     u32 gmbus2_status,
-		     u32 gmbus4_irq_en)
+static int gmbus_wait(struct drm_i915_private *dev_priv, u32 status, u32 irq_en)
 {
-	int i;
-	u32 gmbus2 = 0;
 	DEFINE_WAIT(wait);
-
-	if (!HAS_GMBUS_IRQ(dev_priv))
-		gmbus4_irq_en = 0;
+	u32 gmbus2;
+	int ret;
 
 	/* Important: The hw handles only the first bit, so set only one! Since
 	 * we also need to check for NAKs besides the hw ready/idle signal, we
-	 * need to wake up periodically and check that ourselves. */
-	I915_WRITE(GMBUS4, gmbus4_irq_en);
-
-	for (i = 0; i < msecs_to_jiffies_timeout(50); i++) {
-		prepare_to_wait(&dev_priv->gmbus_wait_queue, &wait,
-				TASK_UNINTERRUPTIBLE);
+	 * need to wake up periodically and check that ourselves.
+	 */
+	if (!HAS_GMBUS_IRQ(dev_priv))
+		irq_en = 0;
 
-		gmbus2 = I915_READ_NOTRACE(GMBUS2);
-		if (gmbus2 & (GMBUS_SATOER | gmbus2_status))
-			break;
+	add_wait_queue(&dev_priv->gmbus_wait_queue, &wait);
+	I915_WRITE_FW(GMBUS4, irq_en);
 
-		schedule_timeout(1);
-	}
-	finish_wait(&dev_priv->gmbus_wait_queue, &wait);
+	status |= GMBUS_SATOER;
+	ret = wait_for_us((gmbus2 = I915_READ_FW(GMBUS2)) & status, 2);
+	if (ret)
+		ret = wait_for((gmbus2 = I915_READ_FW(GMBUS2)) & status, 50);
 
-	I915_WRITE(GMBUS4, 0);
+	I915_WRITE_FW(GMBUS4, 0);
+	remove_wait_queue(&dev_priv->gmbus_wait_queue, &wait);
 
 	if (gmbus2 & GMBUS_SATOER)
 		return -ENXIO;
-	if (gmbus2 & gmbus2_status)
-		return 0;
-	return -ETIMEDOUT;
+
+	return ret;
 }
 
 static int
 gmbus_wait_idle(struct drm_i915_private *dev_priv)
 {
+	DEFINE_WAIT(wait);
+	u32 irq_enable;
 	int ret;
 
-	if (!HAS_GMBUS_IRQ(dev_priv))
-		return intel_wait_for_register(dev_priv,
-					       GMBUS2, GMBUS_ACTIVE, 0,
-					       10);
-
 	/* Important: The hw handles only the first bit, so set only one! */
-	I915_WRITE(GMBUS4, GMBUS_IDLE_EN);
+	irq_enable = 0;
+	if (HAS_GMBUS_IRQ(dev_priv))
+		irq_enable = GMBUS_IDLE_EN;
 
-	ret = wait_event_timeout(dev_priv->gmbus_wait_queue,
-				 (I915_READ_NOTRACE(GMBUS2) & GMBUS_ACTIVE) == 0,
-				 msecs_to_jiffies_timeout(10));
+	add_wait_queue(&dev_priv->gmbus_wait_queue, &wait);
+	I915_WRITE_FW(GMBUS4, irq_enable);
 
-	I915_WRITE(GMBUS4, 0);
+	ret = intel_wait_for_register_fw(dev_priv,
+					 GMBUS2, GMBUS_ACTIVE, 0,
+					 10);
 
-	if (ret)
-		return 0;
-	else
-		return -ETIMEDOUT;
+	I915_WRITE_FW(GMBUS4, 0);
+	remove_wait_queue(&dev_priv->gmbus_wait_queue, &wait);
+
+	return ret;
 }
 
 static int
@@ -323,22 +315,21 @@ gmbus_xfer_read_chunk(struct drm_i915_private *dev_priv,
 		      unsigned short addr, u8 *buf, unsigned int len,
 		      u32 gmbus1_index)
 {
-	I915_WRITE(GMBUS1,
-		   gmbus1_index |
-		   GMBUS_CYCLE_WAIT |
-		   (len << GMBUS_BYTE_COUNT_SHIFT) |
-		   (addr << GMBUS_SLAVE_ADDR_SHIFT) |
-		   GMBUS_SLAVE_READ | GMBUS_SW_RDY);
+	I915_WRITE_FW(GMBUS1,
+		      gmbus1_index |
+		      GMBUS_CYCLE_WAIT |
+		      (len << GMBUS_BYTE_COUNT_SHIFT) |
+		      (addr << GMBUS_SLAVE_ADDR_SHIFT) |
+		      GMBUS_SLAVE_READ | GMBUS_SW_RDY);
 	while (len) {
 		int ret;
 		u32 val, loop = 0;
 
-		ret = gmbus_wait_hw_status(dev_priv, GMBUS_HW_RDY,
-					   GMBUS_HW_RDY_EN);
+		ret = gmbus_wait(dev_priv, GMBUS_HW_RDY, GMBUS_HW_RDY_EN);
 		if (ret)
 			return ret;
 
-		val = I915_READ(GMBUS3);
+		val = I915_READ_FW(GMBUS3);
 		do {
 			*buf++ = val & 0xff;
 			val >>= 8;
@@ -385,12 +376,12 @@ gmbus_xfer_write_chunk(struct drm_i915_private *dev_priv,
 		len -= 1;
 	}
 
-	I915_WRITE(GMBUS3, val);
-	I915_WRITE(GMBUS1,
-		   GMBUS_CYCLE_WAIT |
-		   (chunk_size << GMBUS_BYTE_COUNT_SHIFT) |
-		   (addr << GMBUS_SLAVE_ADDR_SHIFT) |
-		   GMBUS_SLAVE_WRITE | GMBUS_SW_RDY);
+	I915_WRITE_FW(GMBUS3, val);
+	I915_WRITE_FW(GMBUS1,
+		      GMBUS_CYCLE_WAIT |
+		      (chunk_size << GMBUS_BYTE_COUNT_SHIFT) |
+		      (addr << GMBUS_SLAVE_ADDR_SHIFT) |
+		      GMBUS_SLAVE_WRITE | GMBUS_SW_RDY);
 	while (len) {
 		int ret;
 
@@ -399,10 +390,9 @@ gmbus_xfer_write_chunk(struct drm_i915_private *dev_priv,
 			val |= *buf++ << (8 * loop);
 		} while (--len && ++loop < 4);
 
-		I915_WRITE(GMBUS3, val);
+		I915_WRITE_FW(GMBUS3, val);
 
-		ret = gmbus_wait_hw_status(dev_priv, GMBUS_HW_RDY,
-					   GMBUS_HW_RDY_EN);
+		ret = gmbus_wait(dev_priv, GMBUS_HW_RDY, GMBUS_HW_RDY_EN);
 		if (ret)
 			return ret;
 	}
@@ -460,13 +450,13 @@ gmbus_xfer_index_read(struct drm_i915_private *dev_priv, struct i2c_msg *msgs)
 
 	/* GMBUS5 holds 16-bit index */
 	if (gmbus5)
-		I915_WRITE(GMBUS5, gmbus5);
+		I915_WRITE_FW(GMBUS5, gmbus5);
 
 	ret = gmbus_xfer_read(dev_priv, &msgs[1], gmbus1_index);
 
 	/* Clear GMBUS5 after each index transfer */
 	if (gmbus5)
-		I915_WRITE(GMBUS5, 0);
+		I915_WRITE_FW(GMBUS5, 0);
 
 	return ret;
 }
@@ -478,11 +468,15 @@ do_gmbus_xfer(struct i2c_adapter *adapter, struct i2c_msg *msgs, int num)
 					       struct intel_gmbus,
 					       adapter);
 	struct drm_i915_private *dev_priv = bus->dev_priv;
+	const unsigned int fw =
+		intel_uncore_forcewake_for_reg(dev_priv, GMBUS0,
+					       FW_REG_READ | FW_REG_WRITE);
 	int i = 0, inc, try = 0;
 	int ret = 0;
 
+	intel_uncore_forcewake_get(dev_priv, fw);
 retry:
-	I915_WRITE(GMBUS0, bus->reg0);
+	I915_WRITE_FW(GMBUS0, bus->reg0);
 
 	for (; i < num; i += inc) {
 		inc = 1;
@@ -496,8 +490,8 @@ retry:
 		}
 
 		if (!ret)
-			ret = gmbus_wait_hw_status(dev_priv, GMBUS_HW_WAIT_PHASE,
-						   GMBUS_HW_WAIT_EN);
+			ret = gmbus_wait(dev_priv,
+					 GMBUS_HW_WAIT_PHASE, GMBUS_HW_WAIT_EN);
 		if (ret == -ETIMEDOUT)
 			goto timeout;
 		else if (ret)
@@ -508,7 +502,7 @@ retry:
 	 * a STOP on the very first cycle. To simplify the code we
 	 * unconditionally generate the STOP condition with an additional gmbus
 	 * cycle. */
-	I915_WRITE(GMBUS1, GMBUS_CYCLE_STOP | GMBUS_SW_RDY);
+	I915_WRITE_FW(GMBUS1, GMBUS_CYCLE_STOP | GMBUS_SW_RDY);
 
 	/* Mark the GMBUS interface as disabled after waiting for idle.
 	 * We will re-enable it at the start of the next xfer,
@@ -519,7 +513,7 @@ retry:
 			 adapter->name);
 		ret = -ETIMEDOUT;
 	}
-	I915_WRITE(GMBUS0, 0);
+	I915_WRITE_FW(GMBUS0, 0);
 	ret = ret ?: i;
 	goto out;
 
@@ -548,9 +542,9 @@ clear_err:
 	 * of resetting the GMBUS controller and so clearing the
 	 * BUS_ERROR raised by the slave's NAK.
 	 */
-	I915_WRITE(GMBUS1, GMBUS_SW_CLR_INT);
-	I915_WRITE(GMBUS1, 0);
-	I915_WRITE(GMBUS0, 0);
+	I915_WRITE_FW(GMBUS1, GMBUS_SW_CLR_INT);
+	I915_WRITE_FW(GMBUS1, 0);
+	I915_WRITE_FW(GMBUS0, 0);
 
 	DRM_DEBUG_KMS("GMBUS [%s] NAK for addr: %04x %c(%d)\n",
 			 adapter->name, msgs[i].addr,
@@ -573,7 +567,7 @@ clear_err:
 timeout:
 	DRM_DEBUG_KMS("GMBUS [%s] timed out, falling back to bit banging on pin %d\n",
 		      bus->adapter.name, bus->reg0 & 0xff);
-	I915_WRITE(GMBUS0, 0);
+	I915_WRITE_FW(GMBUS0, 0);
 
 	/*
 	 * Hardware may not support GMBUS over these pins? Try GPIO bitbanging
@@ -582,6 +576,7 @@ timeout:
 	ret = -EAGAIN;
 
 out:
+	intel_uncore_forcewake_put(dev_priv, fw);
 	return ret;
 }
 
@@ -633,6 +628,7 @@ static const struct i2c_algorithm gmbus_algorithm = {
 int intel_setup_gmbus(struct drm_device *dev)
 {
 	struct drm_i915_private *dev_priv = to_i915(dev);
+	struct pci_dev *pdev = dev_priv->drm.pdev;
 	struct intel_gmbus *bus;
 	unsigned int pin;
 	int ret;
@@ -663,7 +659,7 @@ int intel_setup_gmbus(struct drm_device *dev)
 			 "i915 gmbus %s",
 			 get_gmbus_pin(dev_priv, pin)->name);
 
-		bus->adapter.dev.parent = &dev->pdev->dev;
+		bus->adapter.dev.parent = &pdev->dev;
 		bus->dev_priv = dev_priv;
 
 		bus->adapter.algo = &gmbus_algorithm;