drm/xe: Move rebar to be done earlier

There may be cases in which the BAR0 also needs to move to accommodate
the bigger BAR2. However if it's not released, the BAR2 resize fails.
During the vram probe it can't be released as it's already in use by
xe_mmio for early register access.

Add a new function in xe_vram and let xe_pci call it directly before
even early device probe. This allows the BAR2 to resize in cases BAR0
also needs to move, assuming there aren't other reasons to hold that
move:

	[] xe 0000:03:00.0: vgaarb: deactivate vga console
	[] xe 0000:03:00.0: [drm] Attempting to resize bar from 8192MiB -> 16384MiB
	[] xe 0000:03:00.0: BAR 0 [mem 0x83000000-0x83ffffff 64bit]: releasing
	[] xe 0000:03:00.0: BAR 2 [mem 0x4000000000-0x41ffffffff 64bit pref]: releasing
	[] pcieport 0000:02:01.0: bridge window [mem 0x4000000000-0x41ffffffff 64bit pref]: releasing
	[] pcieport 0000:01:00.0: bridge window [mem 0x4000000000-0x41ffffffff 64bit pref]: releasing
	[] pcieport 0000:01:00.0: bridge window [mem 0x4000000000-0x43ffffffff 64bit pref]: assigned
	[] pcieport 0000:02:01.0: bridge window [mem 0x4000000000-0x43ffffffff 64bit pref]: assigned
	[] xe 0000:03:00.0: BAR 2 [mem 0x4000000000-0x43ffffffff 64bit pref]: assigned
	[] xe 0000:03:00.0: BAR 0 [mem 0x83000000-0x83ffffff 64bit]: assigned
	[] pcieport 0000:00:01.0: PCI bridge to [bus 01-04]
	[] pcieport 0000:00:01.0:   bridge window [mem 0x83000000-0x840fffff]
	[] pcieport 0000:00:01.0:   bridge window [mem 0x4000000000-0x44007fffff 64bit pref]
	[] pcieport 0000:01:00.0: PCI bridge to [bus 02-04]
	[] pcieport 0000:01:00.0:   bridge window [mem 0x83000000-0x840fffff]
	[] pcieport 0000:01:00.0:   bridge window [mem 0x4000000000-0x43ffffffff 64bit pref]
	[] pcieport 0000:02:01.0: PCI bridge to [bus 03]
	[] pcieport 0000:02:01.0:   bridge window [mem 0x83000000-0x83ffffff]
	[] pcieport 0000:02:01.0:   bridge window [mem 0x4000000000-0x43ffffffff 64bit pref]
	[] xe 0000:03:00.0: [drm] BAR2 resized to 16384M
	[] xe 0000:03:00.0: [drm:xe_pci_probe [xe]] BATTLEMAGE  e221:0000 dgfx:1 gfx:Xe2_HPG (20.02) ...

For BMG there are additional fix needed in the PCI side, but this
helps getting it to a working resize.

All the rebar logic is more pci-specific than xe-specific and can be
done very early in the probe sequence. In future it would be good to
move it out of xe_vram.c, but this refactor is left for later.

Cc: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: stable@vger.kernel.org # 6.12+
Link: https://lore.kernel.org/intel-xe/fafda2a3-fc63-ce97-d22b-803f771a4d19@linux.intel.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20250918-xe-pci-rebar-2-v1-2-6c094702a074@intel.com
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
(cherry picked from commit 45e33f220fd625492c11e15733d8e9b4f9db82a4)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>

0 files changed, 0 insertions, 0 deletions