drm/rockchip: dw_hdmi_qp: Switch to phy_configure()

Stop relying on phy_set_bus_width() based workaround to setup the TMDS
character rate and, instead, use the recently introduced HDMI PHY
configuration API.  This is also a prerequisite to enable high color
depth and FRL support.

Additionally, move the logic to ->atomic_check() callback where the
current mode rate is already provided by the connector state.  As a
matter of fact this is actually necessary to ensure the link rate is
configured before VOP2 attempts to use the PHY PLL as a DCLK source in
vop2_crtc_atomic_enable().  The rationale is to restrict any changes of
the PHY rate via CCF and, instead, prefer the PHY configuration API for
this purpose.

Acked-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20251021-rk3588-10bpc-v3-3-3d3eed00a6db@collabora.com

1 files changed, 19 insertions, 18 deletions

diff --git a/drivers/gpu/drm/rockchip/dw_hdmi_qp-rockchip.c b/drivers/gpu/drm/rockchip/dw_hdmi_qp-rockchip.c
index 36363136a695..69c001f4e905 100644
--- a/drivers/gpu/drm/rockchip/dw_hdmi_qp-rockchip.c
+++ b/drivers/gpu/drm/rockchip/dw_hdmi_qp-rockchip.c
@@ -14,6 +14,7 @@
 #include <linux/module.h>
 #include <linux/platform_device.h>
 #include <linux/phy/phy.h>
+#include <linux/phy/phy-hdmi.h>
 #include <linux/regmap.h>
 #include <linux/workqueue.h>
 
@@ -96,6 +97,7 @@ struct rockchip_hdmi_qp {
 	struct delayed_work hpd_work;
 	int port_id;
 	const struct rockchip_hdmi_qp_ctrl_ops *ctrl_ops;
+	unsigned long long tmds_char_rate;
 };
 
 struct rockchip_hdmi_qp_ctrl_ops {
@@ -114,24 +116,9 @@ static struct rockchip_hdmi_qp *to_rockchip_hdmi_qp(struct drm_encoder *encoder)
 static void dw_hdmi_qp_rockchip_encoder_enable(struct drm_encoder *encoder)
 {
 	struct rockchip_hdmi_qp *hdmi = to_rockchip_hdmi_qp(encoder);
-	struct drm_crtc *crtc = encoder->crtc;
-	unsigned long long rate;
 
 	/* Unconditionally switch to TMDS as FRL is not yet supported */
 	gpiod_set_value(hdmi->frl_enable_gpio, 0);
-
-	if (crtc && crtc->state) {
-		rate = drm_hdmi_compute_mode_clock(&crtc->state->adjusted_mode,
-						   8, HDMI_COLORSPACE_RGB);
-		/*
-		 * FIXME: Temporary workaround to pass pixel clock rate
-		 * to the PHY driver until phy_configure_opts_hdmi
-		 * becomes available in the PHY API. See also the related
-		 * comment in rk_hdptx_phy_power_on() from
-		 * drivers/phy/rockchip/phy-rockchip-samsung-hdptx.c
-		 */
-		phy_set_bus_width(hdmi->phy, div_u64(rate, 100));
-	}
 }
 
 static int
@@ -139,12 +126,26 @@ dw_hdmi_qp_rockchip_encoder_atomic_check(struct drm_encoder *encoder,
 					 struct drm_crtc_state *crtc_state,
 					 struct drm_connector_state *conn_state)
 {
+	struct rockchip_hdmi_qp *hdmi = to_rockchip_hdmi_qp(encoder);
 	struct rockchip_crtc_state *s = to_rockchip_crtc_state(crtc_state);
+	union phy_configure_opts phy_cfg = {};
+	int ret;
 
-	s->output_mode = ROCKCHIP_OUT_MODE_AAAA;
-	s->output_type = DRM_MODE_CONNECTOR_HDMIA;
+	if (hdmi->tmds_char_rate == conn_state->hdmi.tmds_char_rate)
+		return 0;
 
-	return 0;
+	phy_cfg.hdmi.tmds_char_rate = conn_state->hdmi.tmds_char_rate;
+
+	ret = phy_configure(hdmi->phy, &phy_cfg);
+	if (!ret) {
+		hdmi->tmds_char_rate = conn_state->hdmi.tmds_char_rate;
+		s->output_mode = ROCKCHIP_OUT_MODE_AAAA;
+		s->output_type = DRM_MODE_CONNECTOR_HDMIA;
+	} else {
+		dev_err(hdmi->dev, "Failed to configure phy: %d\n", ret);
+	}
+
+	return ret;
 }
 
 static const struct