Merge tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull Char/Misc/IIO/Binder updates from Greg KH:
 "Here is the big set of char/misc/iio and other driver subsystem
  changes for 6.18-rc1.

  Loads of different stuff in here, it was a busy development cycle in
  lots of different subsystems, with over 27k new lines added to the
  tree.

  Included in here are:

   - IIO updates including new drivers, reworking of existing apis, and
     other goodness in the sensor subsystems

   - MEI driver updates and additions

   - NVMEM driver updates

   - slimbus removal for an unused driver and some other minor updates

   - coresight driver updates and additions

   - MHI driver updates

   - comedi driver updates and fixes

   - extcon driver updates

   - interconnect driver additions

   - eeprom driver updates and fixes

   - minor UIO driver updates

   - tiny W1 driver updates

  But the majority of new code is in the rust bindings and additions,
  which includes:

   - misc driver rust binding updates for read/write support, we can now
     write "normal" misc drivers in rust fully, and the sample driver
     shows how this can be done.

   - Initial framework for USB driver rust bindings, which are disabled
     for now in the build, due to limited support, but coming in through
     this tree due to dependencies on other rust binding changes that
     were in here. I'll be enabling these back on in the build in the
     usb.git tree after -rc1 is out so that developers can continue to
     work on these in linux-next over the next development cycle.

   - Android Binder driver implemented in Rust.

     This is the big one, and was driving a huge majority of the rust
     binding work over the past years. Right now there are two binder
     drivers in the kernel, selected only at build time as to which one
     to use as binder wants to be included in the system at boot time.

     The binder C maintainers all agreed on this, as eventually, they
     want the C code to be removed from the tree, but it will take a few
     releases to get there while both are maintained to ensure that the
     rust implementation is fully stable and compliant with the existing
     userspace apis.

  All of these have been in linux-next for a while"

* tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (320 commits)
  rust: usb: keep usb::Device private for now
  rust: usb: don't retain device context for the interface parent
  USB: disable rust bindings from the build for now
  samples: rust: add a USB driver sample
  rust: usb: add basic USB abstractions
  coresight: Add label sysfs node support
  dt-bindings: arm: Add label in the coresight components
  coresight: tnoc: add new AMBA ID to support Trace Noc V2
  coresight: Fix incorrect handling for return value of devm_kzalloc
  coresight: tpda: fix the logic to setup the element size
  coresight: trbe: Return NULL pointer for allocation failures
  coresight: Refactor runtime PM
  coresight: Make clock sequence consistent
  coresight: Refactor driver data allocation
  coresight: Consolidate clock enabling
  coresight: Avoid enable programming clock duplicately
  coresight: Appropriately disable trace bus clocks
  coresight: Appropriately disable programming clocks
  coresight: etm4x: Support atclk
  coresight: catu: Support atclk
  ...

1 files changed, 58 insertions, 0 deletions

diff --git a/include/linux/mfd/88pm886.h b/include/linux/mfd/88pm886.h
index 85eca44f39ab..38892ba7b8a4 100644
--- a/include/linux/mfd/88pm886.h
+++ b/include/linux/mfd/88pm886.h
@@ -10,6 +10,7 @@
 #define PM886_IRQ_ONKEY			0
 
 #define PM886_PAGE_OFFSET_REGULATORS	1
+#define PM886_PAGE_OFFSET_GPADC		2
 
 #define PM886_REG_ID			0x00
 
@@ -70,6 +71,63 @@
 #define PM886_LDO_VSEL_MASK		0x0f
 #define PM886_BUCK_VSEL_MASK		0x7f
 
+/* GPADC enable/disable registers */
+#define PM886_REG_GPADC_CONFIG(n)	(n)
+
+#define PM886_GPADC_VSC_EN		BIT(0)
+#define PM886_GPADC_VBAT_EN		BIT(1)
+#define PM886_GPADC_GNDDET1_EN		BIT(3)
+#define PM886_GPADC_VBUS_EN		BIT(4)
+#define PM886_GPADC_VCHG_PWR_EN		BIT(5)
+#define PM886_GPADC_VCF_OUT_EN		BIT(6)
+#define PM886_GPADC_CONFIG1_EN_ALL	\
+	(PM886_GPADC_VSC_EN |		\
+	 PM886_GPADC_VBAT_EN |		\
+	 PM886_GPADC_GNDDET1_EN |	\
+	 PM886_GPADC_VBUS_EN |		\
+	 PM886_GPADC_VCHG_PWR_EN |	\
+	 PM886_GPADC_VCF_OUT_EN)
+
+#define PM886_GPADC_TINT_EN		BIT(0)
+#define PM886_GPADC_PMODE_EN		BIT(1)
+#define PM886_GPADC_GPADC0_EN		BIT(2)
+#define PM886_GPADC_GPADC1_EN		BIT(3)
+#define PM886_GPADC_GPADC2_EN		BIT(4)
+#define PM886_GPADC_GPADC3_EN		BIT(5)
+#define PM886_GPADC_MIC_DET_EN		BIT(6)
+#define PM886_GPADC_CONFIG2_EN_ALL	\
+	(PM886_GPADC_TINT_EN |		\
+	 PM886_GPADC_GPADC0_EN |	\
+	 PM886_GPADC_GPADC1_EN |	\
+	 PM886_GPADC_GPADC2_EN |	\
+	 PM886_GPADC_GPADC3_EN |	\
+	 PM886_GPADC_MIC_DET_EN)
+
+/* No CONFIG3_EN_ALL because this is the only bit there. */
+#define PM886_GPADC_GND_DET2_EN		BIT(0)
+
+/* GPADC channel registers */
+#define PM886_REG_GPADC_VSC		0x40
+#define PM886_REG_GPADC_VCHG_PWR	0x4c
+#define PM886_REG_GPADC_VCF_OUT		0x4e
+#define PM886_REG_GPADC_TINT		0x50
+#define PM886_REG_GPADC_GPADC0		0x54
+#define PM886_REG_GPADC_GPADC1		0x56
+#define PM886_REG_GPADC_GPADC2		0x58
+#define PM886_REG_GPADC_VBAT		0xa0
+#define PM886_REG_GPADC_GND_DET1	0xa4
+#define PM886_REG_GPADC_GND_DET2	0xa6
+#define PM886_REG_GPADC_VBUS		0xa8
+#define PM886_REG_GPADC_GPADC3		0xaa
+#define PM886_REG_GPADC_MIC_DET		0xac
+#define PM886_REG_GPADC_VBAT_SLP	0xb0
+
+/* VBAT_SLP is the last register and is 2 bytes wide like other channels. */
+#define PM886_GPADC_MAX_REGISTER	(PM886_REG_GPADC_VBAT_SLP + 1)
+
+#define PM886_GPADC_BIAS_LEVELS		16
+#define PM886_GPADC_INDEX_TO_BIAS_uA(i)	(1 + (i) * 5)
+
 struct pm886_chip {
 	struct i2c_client *client;
 	unsigned int chip_id;