Merge bk://ldm@bkbits.net/linux-2.5-driverfs

into osdl.org:/home/mochel/src/kernel/devel/linux-2.5-driverfs

2 files changed, 493 insertions, 528 deletions

diff --git a/include/linux/hdreg.h b/include/linux/hdreg.h
index dcedacb849ea..5ed104e84e43 100644
--- a/include/linux/hdreg.h
+++ b/include/linux/hdreg.h
@@ -2,279 +2,18 @@
 #define _LINUX_HDREG_H
 
 /*
- * This file contains some defines for the AT-hd-controller.
- * Various sources.
- */
-
-#define HD_IRQ 14			/* the standard disk interrupt */
-
-/* ide.c has its own port definitions in "ide.h" */
-
-/* Hd controller regs. Ref: IBM AT Bios-listing */
-#define HD_DATA		0x1f0		/* _CTL when writing */
-#define HD_ERROR	0x1f1		/* see err-bits */
-#define HD_NSECTOR	0x1f2		/* nr of sectors to read/write */
-#define HD_SECTOR	0x1f3		/* starting sector */
-#define HD_LCYL		0x1f4		/* starting cylinder */
-#define HD_HCYL		0x1f5		/* high byte of starting cyl */
-#define HD_CURRENT	0x1f6		/* 101dhhhh , d=drive, hhhh=head */
-#define HD_STATUS	0x1f7		/* see status-bits */
-#define HD_FEATURE	HD_ERROR	/* same io address, read=error, write=feature */
-#define HD_PRECOMP	HD_FEATURE	/* obsolete use of this port - predates IDE */
-#define HD_COMMAND	HD_STATUS	/* same io address, read=status, write=cmd */
-
-#define HD_CMD		0x3f6		/* used for resets */
-#define HD_ALTSTATUS	0x3f6		/* same as HD_STATUS but doesn't clear irq */
-
-/* remainder is shared between hd.c, ide.c, ide-cd.c, and the hdparm utility */
-
-/* Bits of HD_STATUS */
-#define ERR_STAT		0x01
-#define INDEX_STAT		0x02
-#define ECC_STAT		0x04	/* Corrected error */
-#define DRQ_STAT		0x08
-#define SEEK_STAT		0x10
-#define SERVICE_STAT		SEEK_STAT
-#define WRERR_STAT		0x20
-#define READY_STAT		0x40
-#define BUSY_STAT		0x80
-
-/* Bits for HD_ERROR */
-#define MARK_ERR		0x01	/* Bad address mark */
-#define TRK0_ERR		0x02	/* couldn't find track 0 */
-#define ABRT_ERR		0x04	/* Command aborted */
-#define MCR_ERR			0x08	/* media change request */
-#define ID_ERR			0x10	/* ID field not found */
-#define MC_ERR			0x20	/* media changed */
-#define ECC_ERR			0x40	/* Uncorrectable ECC error */
-#define BBD_ERR			0x80	/* pre-EIDE meaning:  block marked bad */
-#define ICRC_ERR		0x80	/* new meaning:  CRC error during transfer */
-
-/*
- * sector count bits
- */
-#define NSEC_CD			0x01
-#define NSEC_IO			0x02
-#define NSEC_REL		0x04
-
-/*
  * Command Header sizes for IOCTL commands
  */
-
 #define HDIO_DRIVE_CMD_HDR_SIZE		(4 * sizeof(u8))
 #define HDIO_DRIVE_HOB_HDR_SIZE		(8 * sizeof(u8))
 
-#define IDE_DRIVE_TASK_INVALID		-1
-#define IDE_DRIVE_TASK_NO_DATA		0
-#define IDE_DRIVE_TASK_SET_XFER		1
-
-#define IDE_DRIVE_TASK_IN		2
-
-#define IDE_DRIVE_TASK_OUT		3
-#define IDE_DRIVE_TASK_RAW_WRITE	4
-
-struct hd_drive_task_hdr {
-	u8 feature;
-	u8 sector_count;
-	u8 sector_number;
-	u8 low_cylinder;
-	u8 high_cylinder;
-	u8 device_head;
-} __attribute__((packed));
-
-/*
- * Define standard taskfile in/out register
- */
-#define IDE_TASKFILE_STD_OUT_FLAGS	0xFE
-#define IDE_TASKFILE_STD_IN_FLAGS	0xFE
-#define IDE_HOB_STD_OUT_FLAGS		0xC0
-#define IDE_HOB_STD_IN_FLAGS		0xC0
-
-#define TASKFILE_INVALID		0x7fff
-#define TASKFILE_48			0x8000
-
-#define TASKFILE_NO_DATA		0x0000
-
-#define TASKFILE_IN			0x0001
-#define TASKFILE_MULTI_IN		0x0002
-
-#define TASKFILE_OUT			0x0004
-#define TASKFILE_MULTI_OUT		0x0008
-#define TASKFILE_IN_OUT			0x0010
-
-#define TASKFILE_IN_DMA			0x0020
-#define TASKFILE_OUT_DMA		0x0040
-#define TASKFILE_IN_DMAQ		0x0080
-#define TASKFILE_OUT_DMAQ		0x0100
-
-#define TASKFILE_P_IN			0x0200
-#define TASKFILE_P_OUT			0x0400
-#define TASKFILE_P_IN_DMA		0x0800
-#define TASKFILE_P_OUT_DMA		0x1000
-#define TASKFILE_P_IN_DMAQ		0x2000
-#define TASKFILE_P_OUT_DMAQ		0x4000
-
-/* ATA/ATAPI Commands pre T13 Spec */
-#define WIN_NOP				0x00
-#define CFA_REQ_EXT_ERROR_CODE		0x03 /* CFA Request Extended Error Code */
-#define WIN_SRST			0x08 /* ATAPI soft reset command */
-#define WIN_DEVICE_RESET		0x08
-#define WIN_RESTORE			0x10
-#define WIN_READ			0x20 /* 28-Bit */
-#define WIN_READ_EXT			0x24 /* 48-Bit */
-#define WIN_READDMA_EXT			0x25 /* 48-Bit */
-#define WIN_READDMA_QUEUED_EXT		0x26 /* 48-Bit */
-#define WIN_READ_NATIVE_MAX_EXT		0x27 /* 48-Bit */
-#define WIN_MULTREAD_EXT		0x29 /* 48-Bit */
-#define WIN_WRITE			0x30 /* 28-Bit */
-#define WIN_WRITE_EXT			0x34 /* 48-Bit */
-#define WIN_WRITEDMA_EXT		0x35 /* 48-Bit */
-#define WIN_WRITEDMA_QUEUED_EXT		0x36 /* 48-Bit */
-#define WIN_SET_MAX_EXT			0x37 /* 48-Bit */
-#define CFA_WRITE_SECT_WO_ERASE		0x38 /* CFA Write Sectors without erase */
-#define WIN_MULTWRITE_EXT		0x39 /* 48-Bit */
-#define WIN_WRITE_VERIFY		0x3C /* 28-Bit */
-#define WIN_VERIFY			0x40 /* 28-Bit - Read Verify Sectors */
-#define WIN_VERIFY_EXT			0x42 /* 48-Bit */
-#define WIN_FORMAT			0x50
-#define WIN_INIT			0x60
-#define WIN_SEEK			0x70
-#define CFA_TRANSLATE_SECTOR		0x87 /* CFA Translate Sector */
-#define WIN_DIAGNOSE			0x90
-#define WIN_SPECIFY			0x91 /* set drive geometry translation */
-#define WIN_DOWNLOAD_MICROCODE		0x92
-#define WIN_STANDBYNOW2			0x94
-#define WIN_SETIDLE2			0x97
-#define WIN_CHECKPOWERMODE2		0x98
-#define WIN_SLEEPNOW2			0x99
-#define WIN_PACKETCMD			0xA0 /* Send a packet command. */
-#define WIN_PIDENTIFY			0xA1 /* identify ATAPI device	*/
-#define WIN_QUEUED_SERVICE		0xA2
-#define WIN_SMART			0xB0 /* self-monitoring and reporting */
-#define CFA_ERASE_SECTORS		0xC0
-#define WIN_MULTREAD			0xC4 /* read sectors using multiple mode*/
-#define WIN_MULTWRITE			0xC5 /* write sectors using multiple mode */
-#define WIN_SETMULT			0xC6 /* enable/disable multiple mode */
-#define WIN_READDMA_QUEUED		0xC7 /* read sectors using Queued DMA transfers */
-#define WIN_READDMA			0xC8 /* read sectors using DMA transfers */
-#define WIN_WRITEDMA			0xCA /* write sectors using DMA transfers */
-#define WIN_WRITEDMA_QUEUED		0xCC /* write sectors using Queued DMA transfers */
-#define CFA_WRITE_MULTI_WO_ERASE	0xCD /* CFA Write multiple without erase */
-#define WIN_GETMEDIASTATUS		0xDA
-#define WIN_DOORLOCK			0xDE /* lock door on removable drives */
-#define WIN_DOORUNLOCK			0xDF /* unlock door on removable drives */
-#define WIN_STANDBYNOW1			0xE0
-#define WIN_IDLEIMMEDIATE		0xE1 /* force drive to become "ready" */
-#define WIN_STANDBY			0xE2 /* Set device in Standby Mode */
-#define WIN_SETIDLE1			0xE3
-#define WIN_READ_BUFFER			0xE4 /* force read only 1 sector */
-#define WIN_CHECKPOWERMODE1		0xE5
-#define WIN_SLEEPNOW1			0xE6
-#define WIN_FLUSH_CACHE			0xE7
-#define WIN_WRITE_BUFFER		0xE8 /* force write only 1 sector */
-#define WIN_FLUSH_CACHE_EXT		0xEA /* 48-Bit */
-#define WIN_IDENTIFY			0xEC /* ask drive to identify itself	*/
-#define WIN_MEDIAEJECT			0xED
-#define WIN_IDENTIFY_DMA		0xEE /* same as WIN_IDENTIFY, but DMA */
-#define WIN_SETFEATURES			0xEF /* set special drive features */
-#define EXABYTE_ENABLE_NEST		0xF0
-#define WIN_SECURITY_SET_PASS		0xF1
-#define WIN_SECURITY_UNLOCK		0xF2
-#define WIN_SECURITY_ERASE_PREPARE	0xF3
-#define WIN_SECURITY_ERASE_UNIT		0xF4
-#define WIN_SECURITY_FREEZE_LOCK	0xF5
-#define WIN_SECURITY_DISABLE		0xF6
-#define WIN_READ_NATIVE_MAX		0xF8 /* return the native maximum address */
-#define WIN_SET_MAX			0xF9
-#define DISABLE_SEAGATE			0xFB
-
-/* WIN_SMART sub-commands */
-
-#define SMART_READ_VALUES		0xD0
-#define SMART_READ_THRESHOLDS		0xD1
-#define SMART_AUTOSAVE			0xD2
-#define SMART_SAVE			0xD3
-#define SMART_IMMEDIATE_OFFLINE		0xD4
-#define SMART_READ_LOG_SECTOR		0xD5
-#define SMART_WRITE_LOG_SECTOR		0xD6
-#define SMART_WRITE_THRESHOLDS		0xD7
-#define SMART_ENABLE			0xD8
-#define SMART_DISABLE			0xD9
-#define SMART_STATUS			0xDA
-#define SMART_AUTO_OFFLINE		0xDB
-
-/* Password used in TF4 & TF5 executing SMART commands */
-
-#define SMART_LCYL_PASS			0x4F
-#define SMART_HCYL_PASS			0xC2
-
-/* WIN_SETFEATURES sub-commands */
-
-#define SETFEATURES_EN_WCACHE	0x02	/* Enable write cache */
-#define SETFEATURES_XFER	0x03	/* Set transfer mode */
-#	define XFER_UDMA_7	0x47	/* 0100|0111 */
-#	define XFER_UDMA_6	0x46	/* 0100|0110 */
-#	define XFER_UDMA_5	0x45	/* 0100|0101 */
-#	define XFER_UDMA_4	0x44	/* 0100|0100 */
-#	define XFER_UDMA_3	0x43	/* 0100|0011 */
-#	define XFER_UDMA_2	0x42	/* 0100|0010 */
-#	define XFER_UDMA_1	0x41	/* 0100|0001 */
-#	define XFER_UDMA_0	0x40	/* 0100|0000 */
-#	define XFER_MW_DMA_2	0x22	/* 0010|0010 */
-#	define XFER_MW_DMA_1	0x21	/* 0010|0001 */
-#	define XFER_MW_DMA_0	0x20	/* 0010|0000 */
-#	define XFER_SW_DMA_2	0x12	/* 0001|0010 */
-#	define XFER_SW_DMA_1	0x11	/* 0001|0001 */
-#	define XFER_SW_DMA_0	0x10	/* 0001|0000 */
-#	define XFER_PIO_4	0x0C	/* 0000|1100 */
-#	define XFER_PIO_3	0x0B	/* 0000|1011 */
-#	define XFER_PIO_2	0x0A	/* 0000|1010 */
-#	define XFER_PIO_1	0x09	/* 0000|1001 */
-#	define XFER_PIO_0	0x08	/* 0000|1000 */
-#	define XFER_PIO_SLOW	0x00	/* 0000|0000 */
-#define SETFEATURES_DIS_DEFECT	0x04	/* Disable Defect Management */
-#define SETFEATURES_EN_APM	0x05	/* Enable advanced power management */
-#define SETFEATURES_DIS_MSN	0x31	/* Disable Media Status Notification */
-#define SETFEATURES_EN_AAM	0x42	/* Enable Automatic Acoustic Management */
-#define SETFEATURES_DIS_RLA	0x55	/* Disable read look-ahead feature */
-#define SETFEATURES_EN_RI	0x5D	/* Enable release interrupt */
-#define SETFEATURES_EN_SI	0x5E	/* Enable SERVICE interrupt */
-#define SETFEATURES_DIS_RPOD	0x66	/* Disable reverting to power on defaults */
-#define SETFEATURES_DIS_WCACHE	0x82	/* Disable write cache */
-#define SETFEATURES_EN_DEFECT	0x84	/* Enable Defect Management */
-#define SETFEATURES_DIS_APM	0x85	/* Disable advanced power management */
-#define SETFEATURES_EN_MSN	0x95	/* Enable Media Status Notification */
-#define SETFEATURES_EN_RLA	0xAA	/* Enable read look-ahead feature */
-#define SETFEATURES_PREFETCH	0xAB	/* Sets drive prefetch value */
-#define SETFEATURES_DIS_AAM	0xC2	/* Disable Automatic Acoustic Management */
-#define SETFEATURES_EN_RPOD	0xCC	/* Enable reverting to power on defaults */
-#define SETFEATURES_DIS_RI	0xDD	/* Disable release interrupt */
-#define SETFEATURES_DIS_SI	0xDE	/* Disable SERVICE interrupt */
-
-/* WIN_SECURITY sub-commands */
-
-#define SECURITY_SET_PASSWORD		0xBA
-#define SECURITY_UNLOCK			0xBB
-#define SECURITY_ERASE_PREPARE		0xBC
-#define SECURITY_ERASE_UNIT		0xBD
-#define SECURITY_FREEZE_LOCK		0xBE
-#define SECURITY_DISABLE_PASSWORD	0xBF
-
 struct hd_geometry {
-      u8 heads;
-      u8 sectors;
-      u16 cylinders;
+      __u8 heads;
+      __u8 sectors;
+      __u16 cylinders;
       unsigned long start;
 };
 
-/* BIG GEOMETRY - dying, used only by HDIO_GETGEO_BIG_RAW */
-struct hd_big_geometry {
-	u8 heads;
-	u8 sectors;
-	u32 cylinders;
-	unsigned long start;
-};
-
 /* hd/ide ctl's that pass (arg) ptrs to user space are numbered 0x030n/0x031n */
 #define HDIO_GETGEO		0x0301	/* get device geometry */
 #define HDIO_GET_UNMASKINTR	0x0302	/* get current unmask setting */
@@ -306,263 +45,8 @@ struct hd_big_geometry {
 #define HDIO_SET_QDMA		0x032e	/* change use-qdma flag */
 #define HDIO_SET_ADDRESS	0x032f	/* change lba addressing modes */
 
-/* bus states */
-enum {
-	BUSSTATE_OFF = 0,
-	BUSSTATE_ON,
-	BUSSTATE_TRISTATE
-};
-
 /* hd/ide ctl's that pass (arg) ptrs to user space are numbered 0x033n/0x033n */
 /* 0x330 is reserved - used to be HDIO_GETGEO_BIG */
 #define HDIO_GETGEO_BIG_RAW	0x0331	/* */
 
-#define __NEW_HD_DRIVE_ID
-
-/*
- * Structure returned by HDIO_GET_IDENTITY, as per ANSI NCITS ATA6 rev.1b spec.
- *
- * If you change something here, please remember to update fix_driveid() in
- * ide/probe.c.
- */
-struct hd_driveid {
-	u16	config;		/* lots of obsolete bit flags */
-	u16	cyls;		/* Obsolete, "physical" cyls */
-	u16	reserved2;	/* reserved (word 2) */
-	u16	heads;		/* Obsolete, "physical" heads */
-	u16	track_bytes;	/* unformatted bytes per track */
-	u16	sector_bytes;	/* unformatted bytes per sector */
-	u16	sectors;	/* Obsolete, "physical" sectors per track */
-	u16	vendor0;	/* vendor unique */
-	u16	vendor1;	/* vendor unique */
-	u16	vendor2;	/* Retired vendor unique */
-	u8	serial_no[20];	/* 0 = not_specified */
-	u16	buf_type;	/* Retired */
-	u16	buf_size;	/* Retired, 512 byte increments
-				 * 0 = not_specified
-				 */
-	u16	ecc_bytes;	/* for r/w long cmds; 0 = not_specified */
-	u8	fw_rev[8];	/* 0 = not_specified */
-	char	model[40];	/* 0 = not_specified */
-	u8	max_multsect;	/* 0=not_implemented */
-	u8	vendor3;	/* vendor unique */
-	u16	dword_io;	/* 0=not_implemented; 1=implemented */
-	u8	vendor4;	/* vendor unique */
-	u8	capability;	/* (upper byte of word 49)
-				 *  3:	IORDYsup
-				 *  2:	IORDYsw
-				 *  1:	LBA
-				 *  0:	DMA
-				 */
-	u16	reserved50;	/* reserved (word 50) */
-	u8	vendor5;	/* Obsolete, vendor unique */
-	u8	tPIO;		/* Obsolete, 0=slow, 1=medium, 2=fast */
-	u8	vendor6;	/* Obsolete, vendor unique */
-	u8	tDMA;		/* Obsolete, 0=slow, 1=medium, 2=fast */
-	u16	field_valid;	/* (word 53)
-				 *  2:	ultra_ok	word  88
-				 *  1:	eide_ok		words 64-70
-				 *  0:	cur_ok		words 54-58
-				 */
-	u16	cur_cyls;	/* Obsolete, logical cylinders */
-	u16	cur_heads;	/* Obsolete, l heads */
-	u16	cur_sectors;	/* Obsolete, l sectors per track */
-	u16	cur_capacity0;	/* Obsolete, l total sectors on drive */
-	u16	cur_capacity1;	/* Obsolete, (2 words, misaligned int)     */
-	u8	multsect;	/* current multiple sector count */
-	u8	multsect_valid;	/* when (bit0==1) multsect is ok */
-	u32	lba_capacity;	/* Obsolete, total number of sectors */
-	u16	dma_1word;	/* Obsolete, single-word dma info */
-	u16	dma_mword;	/* multiple-word dma info */
-	u16	eide_pio_modes; /* bits 0:mode3 1:mode4 */
-	u16	eide_dma_min;	/* min mword dma cycle time (ns) */
-	u16	eide_dma_time;	/* recommended mword dma cycle time (ns) */
-	u16	eide_pio;       /* min cycle time (ns), no IORDY  */
-	u16	eide_pio_iordy; /* min cycle time (ns), with IORDY */
-	u16	words69_70[2];	/* reserved words 69-70
-				 * future command overlap and queuing
-				 */
-	/* HDIO_GET_IDENTITY currently returns only words 0 through 70 */
-	u16	words71_74[4];	/* reserved words 71-74
-				 * for IDENTIFY PACKET DEVICE command
-				 */
-	u16	queue_depth;	/* (word 75)
-				 * 15:5	reserved
-				 *  4:0	Maximum queue depth -1
-				 */
-	u16	words76_79[4];	/* reserved words 76-79 */
-	u16	major_rev_num;	/* (word 80) */
-	u16	minor_rev_num;	/* (word 81) */
-	u16	command_set_1;	/* (word 82) supported
-				 * 15:	Obsolete
-				 * 14:	NOP command
-				 * 13:	READ_BUFFER
-				 * 12:	WRITE_BUFFER
-				 * 11:	Obsolete
-				 * 10:	Host Protected Area
-				 *  9:	DEVICE Reset
-				 *  8:	SERVICE Interrupt
-				 *  7:	Release Interrupt
-				 *  6:	look-ahead
-				 *  5:	write cache
-				 *  4:	PACKET Command
-				 *  3:	Power Management Feature Set
-				 *  2:	Removable Feature Set
-				 *  1:	Security Feature Set
-				 *  0:	SMART Feature Set
-				 */
-	u16	command_set_2;	/* (word 83)
-				 * 15:	Shall be ZERO
-				 * 14:	Shall be ONE
-				 * 13:	FLUSH CACHE EXT
-				 * 12:	FLUSH CACHE
-				 * 11:	Device Configuration Overlay
-				 * 10:	48-bit Address Feature Set
-				 *  9:	Automatic Acoustic Management
-				 *  8:	SET MAX security
-				 *  7:	reserved 1407DT PARTIES
-				 *  6:	SetF sub-command Power-Up
-				 *  5:	Power-Up in Standby Feature Set
-				 *  4:	Removable Media Notification
-				 *  3:	APM Feature Set
-				 *  2:	CFA Feature Set
-				 *  1:	READ/WRITE DMA QUEUED
-				 *  0:	Download MicroCode
-				 */
-	u16	cfsse;		/* (word 84)
-				 * cmd set-feature supported extensions
-				 * 15:	Shall be ZERO
-				 * 14:	Shall be ONE
-				 * 13:3	reserved
-				 *  2:	Media Serial Number Valid
-				 *  1:	SMART selt-test supported
-				 *  0:	SMART error logging
-				 */
-	u16	cfs_enable_1;	/* (word 85)
-				 * command set-feature enabled
-				 * 15:	Obsolete
-				 * 14:	NOP command
-				 * 13:	READ_BUFFER
-				 * 12:	WRITE_BUFFER
-				 * 11:	Obsolete
-				 * 10:	Host Protected Area
-				 *  9:	DEVICE Reset
-				 *  8:	SERVICE Interrupt
-				 *  7:	Release Interrupt
-				 *  6:	look-ahead
-				 *  5:	write cache
-				 *  4:	PACKET Command
-				 *  3:	Power Management Feature Set
-				 *  2:	Removable Feature Set
-				 *  1:	Security Feature Set
-				 *  0:	SMART Feature Set
-				 */
-	u16	cfs_enable_2;	/* (word 86)
-				 * command set-feature enabled
-				 * 15:	Shall be ZERO
-				 * 14:	Shall be ONE
-				 * 13:	FLUSH CACHE EXT
-				 * 12:	FLUSH CACHE
-				 * 11:	Device Configuration Overlay
-				 * 10:	48-bit Address Feature Set
-				 *  9:	Automatic Acoustic Management
-				 *  8:	SET MAX security
-				 *  7:	reserved 1407DT PARTIES
-				 *  6:	SetF sub-command Power-Up
-				 *  5:	Power-Up in Standby Feature Set
-				 *  4:	Removable Media Notification
-				 *  3:	APM Feature Set
-				 *  2:	CFA Feature Set
-				 *  1:	READ/WRITE DMA QUEUED
-				 *  0:	Download MicroCode
-				 */
-	u16	csf_default;	/* (word 87)
-				 * command set-feature default
-				 * 15:	Shall be ZERO
-				 * 14:	Shall be ONE
-				 * 13:3	reserved
-				 *  2:	Media Serial Number Valid
-				 *  1:	SMART selt-test supported
-				 *  0:	SMART error logging
-				 */
-	u16	dma_ultra;	/* (word 88) */
-	u16	word89;		/* reserved (word 89) */
-	u16	word90;		/* reserved (word 90) */
-	u16	CurAPMvalues;	/* current APM values */
-	u16	word92;		/* reserved (word 92) */
-	u16	hw_config;	/* hardware config (word 93)
-				 * 15:
-				 * 14:
-				 * 13:
-				 * 12:
-				 * 11:
-				 * 10:
-				 *  9:
-				 *  8:
-				 *  7:
-				 *  6:
-				 *  5:
-				 *  4:
-				 *  3:
-				 *  2:
-				 *  1:
-				 *  0:
-				 */
-	u16	acoustic;	/* (word 94)
-				 * 15:8	Vendor's recommended value
-				 *  7:0	current value
-				 */
-	u16	words95_99[5];	/* reserved words 95-99 */
-	u64	lba_capacity_2;	/* 48-bit total number of sectors */
-	u16	words104_125[22];/* reserved words 104-125 */
-	u16	last_lun;	/* (word 126) */
-	u16	word127;	/* (word 127) Feature Set
-				 * Removable Media Notification
-				 * 15:2	reserved
-				 *  1:0	00 = not supported
-				 *	01 = supported
-				 *	10 = reserved
-				 *	11 = reserved
-				 */
-	u16	dlf;		/* (word 128)
-				 * device lock function
-				 * 15:9	reserved
-				 *  8	security level 1:max 0:high
-				 *  7:6	reserved
-				 *  5	enhanced erase
-				 *  4	expire
-				 *  3	frozen
-				 *  2	locked
-				 *  1	en/disabled
-				 *  0	capability
-				 */
-	u16	csfo;		/* (word 129)
-				 * current set features options
-				 * 15:4	reserved
-				 *  3:	auto reassign
-				 *  2:	reverting
-				 *  1:	read-look-ahead
-				 *  0:	write cache
-				 */
-	u16	words130_155[26];/* reserved vendor words 130-155 */
-	u16	word156;	/* reserved vendor word 156 */
-	u16	words157_159[3];/* reserved vendor words 157-159 */
-	u16	cfa_power;	/* (word 160) CFA Power Mode
-				 * 15 word 160 supported
-				 * 14 reserved
-				 * 13
-				 * 12
-				 * 11:0
-				 */
-	u16	words161_175[14];/* Reserved for CFA */
-	u16	words176_205[31];/* Current Media Serial Number */
-	u16	words206_254[48];/* reserved words 206-254 */
-	u16	integrity_word;	/* (word 255)
-				 * 15:8 Checksum
-				 *  7:0 Signature
-				 */
-} __attribute__((packed));
-
-#define IDE_NICE_DSC_OVERLAP	(0)	/* per the DSC overlap protocol */
-
 #endif
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 8a41b3b2e74a..4dd795f055e6 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -8,7 +8,6 @@
 #include <linux/config.h>
 #include <linux/init.h>
 #include <linux/ioport.h>
-#include <linux/hdreg.h>
 #include <linux/hdsmart.h>
 #include <linux/blkdev.h>
 #include <linux/proc_fs.h>
@@ -51,7 +50,460 @@
  *  "No user-serviceable parts" beyond this point
  *****************************************************************************/
 
-typedef unsigned char	byte;	/* used everywhere */
+
+/* ATA/ATAPI Commands pre T13 Spec */
+#define WIN_NOP				0x00
+#define CFA_REQ_EXT_ERROR_CODE		0x03 /* CFA Request Extended Error Code */
+#define WIN_SRST			0x08 /* ATAPI soft reset command */
+#define WIN_DEVICE_RESET		0x08
+#define WIN_RESTORE			0x10
+#define WIN_READ			0x20 /* 28-Bit */
+#define WIN_READ_EXT			0x24 /* 48-Bit */
+#define WIN_READDMA_EXT			0x25 /* 48-Bit */
+#define WIN_READDMA_QUEUED_EXT		0x26 /* 48-Bit */
+#define WIN_READ_NATIVE_MAX_EXT		0x27 /* 48-Bit */
+#define WIN_MULTREAD_EXT		0x29 /* 48-Bit */
+#define WIN_WRITE			0x30 /* 28-Bit */
+#define WIN_WRITE_EXT			0x34 /* 48-Bit */
+#define WIN_WRITEDMA_EXT		0x35 /* 48-Bit */
+#define WIN_WRITEDMA_QUEUED_EXT		0x36 /* 48-Bit */
+#define WIN_SET_MAX_EXT			0x37 /* 48-Bit */
+#define CFA_WRITE_SECT_WO_ERASE		0x38 /* CFA Write Sectors without erase */
+#define WIN_MULTWRITE_EXT		0x39 /* 48-Bit */
+#define WIN_WRITE_VERIFY		0x3C /* 28-Bit */
+#define WIN_VERIFY			0x40 /* 28-Bit - Read Verify Sectors */
+#define WIN_VERIFY_EXT			0x42 /* 48-Bit */
+#define WIN_FORMAT			0x50
+#define WIN_INIT			0x60
+#define WIN_SEEK			0x70
+#define CFA_TRANSLATE_SECTOR		0x87 /* CFA Translate Sector */
+#define WIN_DIAGNOSE			0x90
+#define WIN_SPECIFY			0x91 /* set drive geometry translation */
+#define WIN_DOWNLOAD_MICROCODE		0x92
+#define WIN_STANDBYNOW2			0x94
+#define WIN_SETIDLE2			0x97
+#define WIN_CHECKPOWERMODE2		0x98
+#define WIN_SLEEPNOW2			0x99
+#define WIN_PACKETCMD			0xA0 /* Send a packet command. */
+#define WIN_PIDENTIFY			0xA1 /* identify ATAPI device	*/
+#define WIN_QUEUED_SERVICE		0xA2
+#define WIN_SMART			0xB0 /* self-monitoring and reporting */
+#define CFA_ERASE_SECTORS		0xC0
+#define WIN_MULTREAD			0xC4 /* read sectors using multiple mode*/
+#define WIN_MULTWRITE			0xC5 /* write sectors using multiple mode */
+#define WIN_SETMULT			0xC6 /* enable/disable multiple mode */
+#define WIN_READDMA_QUEUED		0xC7 /* read sectors using Queued DMA transfers */
+#define WIN_READDMA			0xC8 /* read sectors using DMA transfers */
+#define WIN_WRITEDMA			0xCA /* write sectors using DMA transfers */
+#define WIN_WRITEDMA_QUEUED		0xCC /* write sectors using Queued DMA transfers */
+#define CFA_WRITE_MULTI_WO_ERASE	0xCD /* CFA Write multiple without erase */
+#define WIN_GETMEDIASTATUS		0xDA
+#define WIN_DOORLOCK			0xDE /* lock door on removable drives */
+#define WIN_DOORUNLOCK			0xDF /* unlock door on removable drives */
+#define WIN_STANDBYNOW1			0xE0
+#define WIN_IDLEIMMEDIATE		0xE1 /* force drive to become "ready" */
+#define WIN_STANDBY			0xE2 /* Set device in Standby Mode */
+#define WIN_SETIDLE1			0xE3
+#define WIN_READ_BUFFER			0xE4 /* force read only 1 sector */
+#define WIN_CHECKPOWERMODE1		0xE5
+#define WIN_SLEEPNOW1			0xE6
+#define WIN_FLUSH_CACHE			0xE7
+#define WIN_WRITE_BUFFER		0xE8 /* force write only 1 sector */
+#define WIN_FLUSH_CACHE_EXT		0xEA /* 48-Bit */
+#define WIN_IDENTIFY			0xEC /* ask drive to identify itself	*/
+#define WIN_MEDIAEJECT			0xED
+#define WIN_IDENTIFY_DMA		0xEE /* same as WIN_IDENTIFY, but DMA */
+#define WIN_SETFEATURES			0xEF /* set special drive features */
+#define EXABYTE_ENABLE_NEST		0xF0
+#define WIN_SECURITY_SET_PASS		0xF1
+#define WIN_SECURITY_UNLOCK		0xF2
+#define WIN_SECURITY_ERASE_PREPARE	0xF3
+#define WIN_SECURITY_ERASE_UNIT		0xF4
+#define WIN_SECURITY_FREEZE_LOCK	0xF5
+#define WIN_SECURITY_DISABLE		0xF6
+#define WIN_READ_NATIVE_MAX		0xF8 /* return the native maximum address */
+#define WIN_SET_MAX			0xF9
+#define DISABLE_SEAGATE			0xFB
+
+/* WIN_SMART sub-commands */
+
+#define SMART_READ_VALUES		0xD0
+#define SMART_READ_THRESHOLDS		0xD1
+#define SMART_AUTOSAVE			0xD2
+#define SMART_SAVE			0xD3
+#define SMART_IMMEDIATE_OFFLINE		0xD4
+#define SMART_READ_LOG_SECTOR		0xD5
+#define SMART_WRITE_LOG_SECTOR		0xD6
+#define SMART_WRITE_THRESHOLDS		0xD7
+#define SMART_ENABLE			0xD8
+#define SMART_DISABLE			0xD9
+#define SMART_STATUS			0xDA
+#define SMART_AUTO_OFFLINE		0xDB
+
+/* Password used in TF4 & TF5 executing SMART commands */
+
+#define SMART_LCYL_PASS			0x4F
+#define SMART_HCYL_PASS			0xC2
+
+/* WIN_SETFEATURES sub-commands */
+
+#define SETFEATURES_EN_WCACHE	0x02	/* Enable write cache */
+
+#define SETFEATURES_XFER	0x03	/* Set transfer mode */
+#	define XFER_UDMA_7	0x47	/* 0100|0111 */
+#	define XFER_UDMA_6	0x46	/* 0100|0110 */
+#	define XFER_UDMA_5	0x45	/* 0100|0101 */
+#	define XFER_UDMA_4	0x44	/* 0100|0100 */
+#	define XFER_UDMA_3	0x43	/* 0100|0011 */
+#	define XFER_UDMA_2	0x42	/* 0100|0010 */
+#	define XFER_UDMA_1	0x41	/* 0100|0001 */
+#	define XFER_UDMA_0	0x40	/* 0100|0000 */
+#	define XFER_MW_DMA_2	0x22	/* 0010|0010 */
+#	define XFER_MW_DMA_1	0x21	/* 0010|0001 */
+#	define XFER_MW_DMA_0	0x20	/* 0010|0000 */
+#	define XFER_SW_DMA_2	0x12	/* 0001|0010 */
+#	define XFER_SW_DMA_1	0x11	/* 0001|0001 */
+#	define XFER_SW_DMA_0	0x10	/* 0001|0000 */
+#	define XFER_PIO_4	0x0C	/* 0000|1100 */
+#	define XFER_PIO_3	0x0B	/* 0000|1011 */
+#	define XFER_PIO_2	0x0A	/* 0000|1010 */
+#	define XFER_PIO_1	0x09	/* 0000|1001 */
+#	define XFER_PIO_0	0x08	/* 0000|1000 */
+#	define XFER_PIO_SLOW	0x00	/* 0000|0000 */
+
+#define SETFEATURES_DIS_DEFECT	0x04	/* Disable Defect Management */
+#define SETFEATURES_EN_APM	0x05	/* Enable advanced power management */
+#define SETFEATURES_DIS_MSN	0x31	/* Disable Media Status Notification */
+#define SETFEATURES_EN_AAM	0x42	/* Enable Automatic Acoustic Management */
+#define SETFEATURES_DIS_RLA	0x55	/* Disable read look-ahead feature */
+#define SETFEATURES_EN_RI	0x5D	/* Enable release interrupt */
+#define SETFEATURES_EN_SI	0x5E	/* Enable SERVICE interrupt */
+#define SETFEATURES_DIS_RPOD	0x66	/* Disable reverting to power on defaults */
+#define SETFEATURES_DIS_WCACHE	0x82	/* Disable write cache */
+#define SETFEATURES_EN_DEFECT	0x84	/* Enable Defect Management */
+#define SETFEATURES_DIS_APM	0x85	/* Disable advanced power management */
+#define SETFEATURES_EN_MSN	0x95	/* Enable Media Status Notification */
+#define SETFEATURES_EN_RLA	0xAA	/* Enable read look-ahead feature */
+#define SETFEATURES_PREFETCH	0xAB	/* Sets drive prefetch value */
+#define SETFEATURES_DIS_AAM	0xC2	/* Disable Automatic Acoustic Management */
+#define SETFEATURES_EN_RPOD	0xCC	/* Enable reverting to power on defaults */
+#define SETFEATURES_DIS_RI	0xDD	/* Disable release interrupt */
+#define SETFEATURES_DIS_SI	0xDE	/* Disable SERVICE interrupt */
+
+/* WIN_SECURITY sub-commands */
+
+#define SECURITY_SET_PASSWORD		0xBA
+#define SECURITY_UNLOCK			0xBB
+#define SECURITY_ERASE_PREPARE		0xBC
+#define SECURITY_ERASE_UNIT		0xBD
+#define SECURITY_FREEZE_LOCK		0xBE
+#define SECURITY_DISABLE_PASSWORD	0xBF
+
+
+/* Taskfile related constants.
+ */
+#define IDE_DRIVE_TASK_INVALID		-1
+#define IDE_DRIVE_TASK_NO_DATA		0
+#define IDE_DRIVE_TASK_SET_XFER		1
+
+#define IDE_DRIVE_TASK_IN		2
+
+#define IDE_DRIVE_TASK_OUT		3
+#define IDE_DRIVE_TASK_RAW_WRITE	4
+
+struct hd_drive_task_hdr {
+	u8 feature;
+	u8 sector_count;
+	u8 sector_number;
+	u8 low_cylinder;
+	u8 high_cylinder;
+	u8 device_head;
+} __attribute__((packed));
+
+/*
+ * Define standard taskfile in/out register
+ */
+#define IDE_TASKFILE_STD_OUT_FLAGS	0xFE
+#define IDE_TASKFILE_STD_IN_FLAGS	0xFE
+#define IDE_HOB_STD_OUT_FLAGS		0xC0
+#define IDE_HOB_STD_IN_FLAGS		0xC0
+
+#define TASKFILE_INVALID		0x7fff
+#define TASKFILE_48			0x8000
+
+#define TASKFILE_NO_DATA		0x0000
+
+#define TASKFILE_IN			0x0001
+#define TASKFILE_MULTI_IN		0x0002
+
+#define TASKFILE_OUT			0x0004
+#define TASKFILE_MULTI_OUT		0x0008
+#define TASKFILE_IN_OUT			0x0010
+
+#define TASKFILE_IN_DMA			0x0020
+#define TASKFILE_OUT_DMA		0x0040
+#define TASKFILE_IN_DMAQ		0x0080
+#define TASKFILE_OUT_DMAQ		0x0100
+
+#define TASKFILE_P_IN			0x0200
+#define TASKFILE_P_OUT			0x0400
+#define TASKFILE_P_IN_DMA		0x0800
+#define TASKFILE_P_OUT_DMA		0x1000
+#define TASKFILE_P_IN_DMAQ		0x2000
+#define TASKFILE_P_OUT_DMAQ		0x4000
+
+/* bus states */
+enum {
+	BUSSTATE_OFF = 0,
+	BUSSTATE_ON,
+	BUSSTATE_TRISTATE
+};
+
+/*
+ * Structure returned by HDIO_GET_IDENTITY, as per ANSI NCITS ATA6 rev.1b spec.
+ *
+ * If you change something here, please remember to update fix_driveid() in
+ * ide/probe.c.
+ */
+struct hd_driveid {
+	u16	config;		/* lots of obsolete bit flags */
+	u16	cyls;		/* Obsolete, "physical" cyls */
+	u16	reserved2;	/* reserved (word 2) */
+	u16	heads;		/* Obsolete, "physical" heads */
+	u16	track_bytes;	/* unformatted bytes per track */
+	u16	sector_bytes;	/* unformatted bytes per sector */
+	u16	sectors;	/* Obsolete, "physical" sectors per track */
+	u16	vendor0;	/* vendor unique */
+	u16	vendor1;	/* vendor unique */
+	u16	vendor2;	/* Retired vendor unique */
+	u8	serial_no[20];	/* 0 = not_specified */
+	u16	buf_type;	/* Retired */
+	u16	buf_size;	/* Retired, 512 byte increments
+				 * 0 = not_specified
+				 */
+	u16	ecc_bytes;	/* for r/w long cmds; 0 = not_specified */
+	u8	fw_rev[8];	/* 0 = not_specified */
+	char	model[40];	/* 0 = not_specified */
+	u8	max_multsect;	/* 0=not_implemented */
+	u8	vendor3;	/* vendor unique */
+	u16	dword_io;	/* 0=not_implemented; 1=implemented */
+	u8	vendor4;	/* vendor unique */
+	u8	capability;	/* (upper byte of word 49)
+				 *  3:	IORDYsup
+				 *  2:	IORDYsw
+				 *  1:	LBA
+				 *  0:	DMA
+				 */
+	u16	reserved50;	/* reserved (word 50) */
+	u8	vendor5;	/* Obsolete, vendor unique */
+	u8	tPIO;		/* Obsolete, 0=slow, 1=medium, 2=fast */
+	u8	vendor6;	/* Obsolete, vendor unique */
+	u8	tDMA;		/* Obsolete, 0=slow, 1=medium, 2=fast */
+	u16	field_valid;	/* (word 53)
+				 *  2:	ultra_ok	word  88
+				 *  1:	eide_ok		words 64-70
+				 *  0:	cur_ok		words 54-58
+				 */
+	u16	cur_cyls;	/* Obsolete, logical cylinders */
+	u16	cur_heads;	/* Obsolete, l heads */
+	u16	cur_sectors;	/* Obsolete, l sectors per track */
+	u16	cur_capacity0;	/* Obsolete, l total sectors on drive */
+	u16	cur_capacity1;	/* Obsolete, (2 words, misaligned int)     */
+	u8	multsect;	/* current multiple sector count */
+	u8	multsect_valid;	/* when (bit0==1) multsect is ok */
+	u32	lba_capacity;	/* Obsolete, total number of sectors */
+	u16	dma_1word;	/* Obsolete, single-word dma info */
+	u16	dma_mword;	/* multiple-word dma info */
+	u16	eide_pio_modes; /* bits 0:mode3 1:mode4 */
+	u16	eide_dma_min;	/* min mword dma cycle time (ns) */
+	u16	eide_dma_time;	/* recommended mword dma cycle time (ns) */
+	u16	eide_pio;       /* min cycle time (ns), no IORDY  */
+	u16	eide_pio_iordy; /* min cycle time (ns), with IORDY */
+	u16	words69_70[2];	/* reserved words 69-70
+				 * future command overlap and queuing
+				 */
+	/* HDIO_GET_IDENTITY currently returns only words 0 through 70 */
+	u16	words71_74[4];	/* reserved words 71-74
+				 * for IDENTIFY PACKET DEVICE command
+				 */
+	u16	queue_depth;	/* (word 75)
+				 * 15:5	reserved
+				 *  4:0	Maximum queue depth -1
+				 */
+	u16	words76_79[4];	/* reserved words 76-79 */
+	u16	major_rev_num;	/* (word 80) */
+	u16	minor_rev_num;	/* (word 81) */
+	u16	command_set_1;	/* (word 82) supported
+				 * 15:	Obsolete
+				 * 14:	NOP command
+				 * 13:	READ_BUFFER
+				 * 12:	WRITE_BUFFER
+				 * 11:	Obsolete
+				 * 10:	Host Protected Area
+				 *  9:	DEVICE Reset
+				 *  8:	SERVICE Interrupt
+				 *  7:	Release Interrupt
+				 *  6:	look-ahead
+				 *  5:	write cache
+				 *  4:	PACKET Command
+				 *  3:	Power Management Feature Set
+				 *  2:	Removable Feature Set
+				 *  1:	Security Feature Set
+				 *  0:	SMART Feature Set
+				 */
+	u16	command_set_2;	/* (word 83)
+				 * 15:	Shall be ZERO
+				 * 14:	Shall be ONE
+				 * 13:	FLUSH CACHE EXT
+				 * 12:	FLUSH CACHE
+				 * 11:	Device Configuration Overlay
+				 * 10:	48-bit Address Feature Set
+				 *  9:	Automatic Acoustic Management
+				 *  8:	SET MAX security
+				 *  7:	reserved 1407DT PARTIES
+				 *  6:	SetF sub-command Power-Up
+				 *  5:	Power-Up in Standby Feature Set
+				 *  4:	Removable Media Notification
+				 *  3:	APM Feature Set
+				 *  2:	CFA Feature Set
+				 *  1:	READ/WRITE DMA QUEUED
+				 *  0:	Download MicroCode
+				 */
+	u16	cfsse;		/* (word 84)
+				 * cmd set-feature supported extensions
+				 * 15:	Shall be ZERO
+				 * 14:	Shall be ONE
+				 * 13:3	reserved
+				 *  2:	Media Serial Number Valid
+				 *  1:	SMART selt-test supported
+				 *  0:	SMART error logging
+				 */
+	u16	cfs_enable_1;	/* (word 85)
+				 * command set-feature enabled
+				 * 15:	Obsolete
+				 * 14:	NOP command
+				 * 13:	READ_BUFFER
+				 * 12:	WRITE_BUFFER
+				 * 11:	Obsolete
+				 * 10:	Host Protected Area
+				 *  9:	DEVICE Reset
+				 *  8:	SERVICE Interrupt
+				 *  7:	Release Interrupt
+				 *  6:	look-ahead
+				 *  5:	write cache
+				 *  4:	PACKET Command
+				 *  3:	Power Management Feature Set
+				 *  2:	Removable Feature Set
+				 *  1:	Security Feature Set
+				 *  0:	SMART Feature Set
+				 */
+	u16	cfs_enable_2;	/* (word 86)
+				 * command set-feature enabled
+				 * 15:	Shall be ZERO
+				 * 14:	Shall be ONE
+				 * 13:	FLUSH CACHE EXT
+				 * 12:	FLUSH CACHE
+				 * 11:	Device Configuration Overlay
+				 * 10:	48-bit Address Feature Set
+				 *  9:	Automatic Acoustic Management
+				 *  8:	SET MAX security
+				 *  7:	reserved 1407DT PARTIES
+				 *  6:	SetF sub-command Power-Up
+				 *  5:	Power-Up in Standby Feature Set
+				 *  4:	Removable Media Notification
+				 *  3:	APM Feature Set
+				 *  2:	CFA Feature Set
+				 *  1:	READ/WRITE DMA QUEUED
+				 *  0:	Download MicroCode
+				 */
+	u16	csf_default;	/* (word 87)
+				 * command set-feature default
+				 * 15:	Shall be ZERO
+				 * 14:	Shall be ONE
+				 * 13:3	reserved
+				 *  2:	Media Serial Number Valid
+				 *  1:	SMART selt-test supported
+				 *  0:	SMART error logging
+				 */
+	u16	dma_ultra;	/* (word 88) */
+	u16	word89;		/* reserved (word 89) */
+	u16	word90;		/* reserved (word 90) */
+	u16	CurAPMvalues;	/* current APM values */
+	u16	word92;		/* reserved (word 92) */
+	u16	hw_config;	/* hardware config (word 93)
+				 * 15:
+				 * 14:
+				 * 13:
+				 * 12:
+				 * 11:
+				 * 10:
+				 *  9:
+				 *  8:
+				 *  7:
+				 *  6:
+				 *  5:
+				 *  4:
+				 *  3:
+				 *  2:
+				 *  1:
+				 *  0:
+				 */
+	u16	acoustic;	/* (word 94)
+				 * 15:8	Vendor's recommended value
+				 *  7:0	current value
+				 */
+	u16	words95_99[5];	/* reserved words 95-99 */
+	u64	lba_capacity_2;	/* 48-bit total number of sectors */
+	u16	words104_125[22];/* reserved words 104-125 */
+	u16	last_lun;	/* (word 126) */
+	u16	word127;	/* (word 127) Feature Set
+				 * Removable Media Notification
+				 * 15:2	reserved
+				 *  1:0	00 = not supported
+				 *	01 = supported
+				 *	10 = reserved
+				 *	11 = reserved
+				 */
+	u16	dlf;		/* (word 128)
+				 * device lock function
+				 * 15:9	reserved
+				 *  8	security level 1:max 0:high
+				 *  7:6	reserved
+				 *  5	enhanced erase
+				 *  4	expire
+				 *  3	frozen
+				 *  2	locked
+				 *  1	en/disabled
+				 *  0	capability
+				 */
+	u16	csfo;		/* (word 129)
+				 * current set features options
+				 * 15:4	reserved
+				 *  3:	auto reassign
+				 *  2:	reverting
+				 *  1:	read-look-ahead
+				 *  0:	write cache
+				 */
+	u16	words130_155[26];/* reserved vendor words 130-155 */
+	u16	word156;	/* reserved vendor word 156 */
+	u16	words157_159[3];/* reserved vendor words 157-159 */
+	u16	cfa_power;	/* (word 160) CFA Power Mode
+				 * 15 word 160 supported
+				 * 14 reserved
+				 * 13
+				 * 12
+				 * 11:0
+				 */
+	u16	words161_175[14];/* Reserved for CFA */
+	u16	words176_205[31];/* Current Media Serial Number */
+	u16	words206_254[48];/* reserved words 206-254 */
+	u16	integrity_word;	/* (word 255)
+				 * 15:8 Checksum
+				 *  7:0 Signature
+				 */
+} __attribute__((packed));
+
+#define IDE_NICE_DSC_OVERLAP	(0)	/* per the DSC overlap protocol */
 
 /*
  * Probably not wise to fiddle with these
@@ -105,6 +557,35 @@ enum {
 #define GET_ALTSTAT()		IN_BYTE(drive->channel->io_ports[IDE_CONTROL_OFFSET])
 #define GET_FEAT()		IN_BYTE(IDE_NSECTOR_REG)
 
+/* Bits of HD_STATUS */
+#define ERR_STAT		0x01
+#define INDEX_STAT		0x02
+#define ECC_STAT		0x04	/* Corrected error */
+#define DRQ_STAT		0x08
+#define SEEK_STAT		0x10
+#define SERVICE_STAT		SEEK_STAT
+#define WRERR_STAT		0x20
+#define READY_STAT		0x40
+#define BUSY_STAT		0x80
+
+/* Bits for HD_ERROR */
+#define MARK_ERR		0x01	/* Bad address mark */
+#define TRK0_ERR		0x02	/* couldn't find track 0 */
+#define ABRT_ERR		0x04	/* Command aborted */
+#define MCR_ERR			0x08	/* media change request */
+#define ID_ERR			0x10	/* ID field not found */
+#define MC_ERR			0x20	/* media changed */
+#define ECC_ERR			0x40	/* Uncorrectable ECC error */
+#define BBD_ERR			0x80	/* pre-EIDE meaning:  block marked bad */
+#define ICRC_ERR		0x80	/* new meaning:  CRC error during transfer */
+
+/*
+ * sector count bits
+ */
+#define NSEC_CD			0x01
+#define NSEC_IO			0x02
+#define NSEC_REL		0x04
+
 #define BAD_R_STAT		(BUSY_STAT   | ERR_STAT)
 #define BAD_W_STAT		(BAD_R_STAT  | WRERR_STAT)
 #define BAD_STAT		(BAD_R_STAT  | DRQ_STAT)
@@ -665,23 +1146,23 @@ extern struct block_device_operations ide_fops[];
  */
 extern int ideprobe_init(void);
 #ifdef CONFIG_BLK_DEV_IDEDISK
-extern int idedisk_init (void);
+extern int idedisk_init(void);
 #endif
 #ifdef CONFIG_BLK_DEV_IDECD
-extern int ide_cdrom_init (void);
+extern int ide_cdrom_init(void);
 #endif
 #ifdef CONFIG_BLK_DEV_IDETAPE
-extern int idetape_init (void);
+extern int idetape_init(void);
 #endif
 #ifdef CONFIG_BLK_DEV_IDEFLOPPY
-extern int idefloppy_init (void);
+extern int idefloppy_init(void);
 #endif
 #ifdef CONFIG_BLK_DEV_IDESCSI
-extern int idescsi_init (void);
+extern int idescsi_init(void);
 #endif
 
-extern int ide_register_subdriver(struct ata_device *, struct ata_operations *);
-extern int ide_unregister_subdriver(struct ata_device *drive);
+extern int ata_register_device(struct ata_device *, struct ata_operations *);
+extern int ata_unregister_device(struct ata_device *drive);
 extern int ata_revalidate(kdev_t i_rdev);
 extern void ide_driver_module(void);