Merge tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux

Pull clk updates from Stephen Boyd:
 "This is entirely SoC clk drivers.

  The majority diff wise is for the new Rockchip and Qualcomm clk
  drivers which is mostly lines and lines of data structures to describe
  the clk hardware in these SoCs. Beyond those two, Renesas continues to
  incrementally add clks to their SoC drivers, causing them to show up
  higher in the diffstat this time because they added quite a few clks
  all over the place.

  Overall it is a semi-quiet release that has some new clk drivers and
  the usual fixes for clock data that was wrong or missing and
  non-critical cleanups that plug error paths or fix typos.

  New Drivers:
   - Qualcomm IPQ5424 Network Subsystem Clock Controller
   - Qualcomm SM8750 Video Clock Controller
   - Rockchip RV1126B and RK3506 clock drivers
   - i.MX8ULP SIM LPAV clock driver
   - Samsung ACPM (firmware interface) clock driver
   - Altera Agilex5 clock driver"

* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (117 commits)
  clk: keystone: fix compile testing
  clk: keystone: syscon-clk: fix regmap leak on probe failure
  clk: qcom: Mark camcc_sm7150_hws static
  clk: samsung: exynos-clkout: Assign .num before accessing .hws
  clk: rockchip: Add clock and reset driver for RK3506
  dt-bindings: clock: rockchip: Add RK3506 clock and reset unit
  clk: actions: Fix discarding const qualifier by 'container_of' macro
  clk: spacemit: Set clk_hw_onecell_data::num before using flex array
  clk: visconti: Add VIIF clocks
  dt-bindings: clock: tmpv770x: Add VIIF clocks
  dt-bindings: clock: tmpv770x: Remove definition of number of clocks
  clk: visconti: Do not define number of clocks in bindings
  clk: rockchip: Add clock controller for the RV1126B
  dt-bindings: clock, reset: Add support for rv1126b
  clk: rockchip: Implement rockchip_clk_register_armclk_multi_pll()
  clk: qcom: x1e80100-dispcc: Add USB4 router link resets
  dt-bindings: clock: qcom: x1e80100-dispcc: Add USB4 router link resets
  clk: qcom: videocc-sm8750: Add video clock controller driver for SM8750
  dt-bindings: clock: qcom: Add SM8750 video clock controller
  clk: qcom: branch: Extend invert logic for branch2 mem clocks
  ...

2 files changed, 164 insertions, 0 deletions

diff --git a/include/linux/clk/renesas.h b/include/linux/clk/renesas.h
index 0ebbe2f0b45e..69d8159deee3 100644
--- a/include/linux/clk/renesas.h
+++ b/include/linux/clk/renesas.h
@@ -10,7 +10,9 @@
 #ifndef __LINUX_CLK_RENESAS_H_
 #define __LINUX_CLK_RENESAS_H_
 
+#include <linux/clk-provider.h>
 #include <linux/types.h>
+#include <linux/units.h>
 
 struct device;
 struct device_node;
@@ -32,4 +34,147 @@ void cpg_mssr_detach_dev(struct generic_pm_domain *unused, struct device *dev);
 #define cpg_mssr_attach_dev	NULL
 #define cpg_mssr_detach_dev	NULL
 #endif
+
+/**
+ * struct rzv2h_pll_limits - PLL parameter constraints
+ *
+ * This structure defines the minimum and maximum allowed values for
+ * various parameters used to configure a PLL. These limits ensure
+ * the PLL operates within valid and stable ranges.
+ *
+ * @fout: Output frequency range (in MHz)
+ * @fout.min: Minimum allowed output frequency
+ * @fout.max: Maximum allowed output frequency
+ *
+ * @fvco: PLL oscillation frequency range (in MHz)
+ * @fvco.min: Minimum allowed VCO frequency
+ * @fvco.max: Maximum allowed VCO frequency
+ *
+ * @m: Main-divider range
+ * @m.min: Minimum main-divider value
+ * @m.max: Maximum main-divider value
+ *
+ * @p: Pre-divider range
+ * @p.min: Minimum pre-divider value
+ * @p.max: Maximum pre-divider value
+ *
+ * @s: Divider range
+ * @s.min: Minimum divider value
+ * @s.max: Maximum divider value
+ *
+ * @k: Delta-sigma modulator range (signed)
+ * @k.min: Minimum delta-sigma value
+ * @k.max: Maximum delta-sigma value
+ */
+struct rzv2h_pll_limits {
+	struct {
+		u32 min;
+		u32 max;
+	} fout;
+
+	struct {
+		u32 min;
+		u32 max;
+	} fvco;
+
+	struct {
+		u16 min;
+		u16 max;
+	} m;
+
+	struct {
+		u8 min;
+		u8 max;
+	} p;
+
+	struct {
+		u8 min;
+		u8 max;
+	} s;
+
+	struct {
+		s16 min;
+		s16 max;
+	} k;
+};
+
+/**
+ * struct rzv2h_pll_pars - PLL configuration parameters
+ *
+ * This structure contains the configuration parameters for the
+ * Phase-Locked Loop (PLL), used to achieve a specific output frequency.
+ *
+ * @m: Main divider value
+ * @p: Pre-divider value
+ * @s: Output divider value
+ * @k: Delta-sigma modulation value
+ * @freq_millihz: Calculated PLL output frequency in millihertz
+ * @error_millihz: Frequency error from target in millihertz (signed)
+ */
+struct rzv2h_pll_pars {
+	u16 m;
+	u8 p;
+	u8 s;
+	s16 k;
+	u64 freq_millihz;
+	s64 error_millihz;
+};
+
+/**
+ * struct rzv2h_pll_div_pars - PLL parameters with post-divider
+ *
+ * This structure is used for PLLs that include an additional post-divider
+ * stage after the main PLL block. It contains both the PLL configuration
+ * parameters and the resulting frequency/error values after the divider.
+ *
+ * @pll: Main PLL configuration parameters (see struct rzv2h_pll_pars)
+ *
+ * @div: Post-divider configuration and result
+ * @div.divider_value: Divider applied to the PLL output
+ * @div.freq_millihz: Output frequency after divider in millihertz
+ * @div.error_millihz: Frequency error from target in millihertz (signed)
+ */
+struct rzv2h_pll_div_pars {
+	struct rzv2h_pll_pars pll;
+	struct {
+		u8 divider_value;
+		u64 freq_millihz;
+		s64 error_millihz;
+	} div;
+};
+
+#define RZV2H_CPG_PLL_DSI_LIMITS(name)					\
+	static const struct rzv2h_pll_limits (name) = {			\
+		.fout = { .min = 25 * MEGA, .max = 375 * MEGA },	\
+		.fvco = { .min = 1600 * MEGA, .max = 3200 * MEGA },	\
+		.m = { .min = 64, .max = 533 },				\
+		.p = { .min = 1, .max = 4 },				\
+		.s = { .min = 0, .max = 6 },				\
+		.k = { .min = -32768, .max = 32767 },			\
+	}								\
+
+#ifdef CONFIG_CLK_RZV2H
+bool rzv2h_get_pll_pars(const struct rzv2h_pll_limits *limits,
+			struct rzv2h_pll_pars *pars, u64 freq_millihz);
+
+bool rzv2h_get_pll_divs_pars(const struct rzv2h_pll_limits *limits,
+			     struct rzv2h_pll_div_pars *pars,
+			     const u8 *table, u8 table_size, u64 freq_millihz);
+#else
+static inline bool rzv2h_get_pll_pars(const struct rzv2h_pll_limits *limits,
+				      struct rzv2h_pll_pars *pars,
+				      u64 freq_millihz)
+{
+	return false;
+}
+
+static inline bool rzv2h_get_pll_divs_pars(const struct rzv2h_pll_limits *limits,
+					   struct rzv2h_pll_div_pars *pars,
+					   const u8 *table, u8 table_size,
+					   u64 freq_millihz)
+{
+	return false;
+}
+#endif
+
 #endif
diff --git a/include/linux/firmware/samsung/exynos-acpm-protocol.h b/include/linux/firmware/samsung/exynos-acpm-protocol.h
index f628bf1862c2..2091da965a5a 100644
--- a/include/linux/firmware/samsung/exynos-acpm-protocol.h
+++ b/include/linux/firmware/samsung/exynos-acpm-protocol.h
@@ -13,6 +13,15 @@
 struct acpm_handle;
 struct device_node;
 
+struct acpm_dvfs_ops {
+	int (*set_rate)(const struct acpm_handle *handle,
+			unsigned int acpm_chan_id, unsigned int clk_id,
+			unsigned long rate);
+	unsigned long (*get_rate)(const struct acpm_handle *handle,
+				  unsigned int acpm_chan_id,
+				  unsigned int clk_id);
+};
+
 struct acpm_pmic_ops {
 	int (*read_reg)(const struct acpm_handle *handle,
 			unsigned int acpm_chan_id, u8 type, u8 reg, u8 chan,
@@ -32,6 +41,7 @@ struct acpm_pmic_ops {
 };
 
 struct acpm_ops {
+	struct acpm_dvfs_ops dvfs_ops;
 	struct acpm_pmic_ops pmic_ops;
 };
 
@@ -45,7 +55,16 @@ struct acpm_handle {
 
 struct device;
 
+#if IS_ENABLED(CONFIG_EXYNOS_ACPM_PROTOCOL)
 const struct acpm_handle *devm_acpm_get_by_node(struct device *dev,
 						struct device_node *np);
+#else
+
+static inline const struct acpm_handle *devm_acpm_get_by_node(struct device *dev,
+							      struct device_node *np)
+{
+	return NULL;
+}
+#endif
 
 #endif /* __EXYNOS_ACPM_PROTOCOL_H */