Merge tag 'i3c/for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux

Pull i3c updates from Alexandre Belloni:
 "Subsystem:
   - add sysfs entry and attribute for Device NACK Retry count

  Drivers:
   - dw: Device NACK Retry configuration knob
   - mipi-i3c-hci: support multi-bus instances, runtime PM, and suspend
   - renesas: suspend/resume support"

* tag 'i3c/for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (52 commits)
  i3c: dw-i3c-master: fix SIR reject bit mapping for dynamic addresses
  i3c: dw-i3c-master: convert spinlock usage to scoped guards
  i3c: dw: Fix memory leak in dw_i3c_master_i2c_xfers()
  i3c: mipi-i3c-hci-pci: Add System Suspend support
  i3c: mipi-i3c-hci: Add optional System Suspend support
  i3c: master: Add i3c_master_do_daa_ext() for post-hibernation address recovery
  i3c: dw: Initialize spinlock to avoid upsetting lockdep
  i3c: mipi-i3c-hci-pci: Add Runtime PM support
  i3c: mipi-i3c-hci: Add optional Runtime PM support
  i3c: master: Introduce optional Runtime PM support
  i3c: mipi-i3c-hci: Factor out master dynamic address setting into helper
  i3c: mipi-i3c-hci: Allow core re-initialization for Runtime PM support
  i3c: mipi-i3c-hci: Factor out core initialization into helper
  i3c: mipi-i3c-hci: Factor out IO mode setting into helper
  i3c: mipi-i3c-hci: Factor out software reset into helper
  i3c: mipi-i3c-hci: Add PIO suspend and resume support
  i3c: mipi-i3c-hci: Refactor PIO register initialization
  i3c: mipi-i3c-hci: Add DMA suspend and resume support
  i3c: mipi-i3c-hci: Extract ring initialization from hci_dma_init()
  i3c: mipi-i3c-hci: Introduce helper to restore DAT
  ...

3 files changed, 39 insertions, 9 deletions

diff --git a/include/linux/i3c/device.h b/include/linux/i3c/device.h
index 9fcb6410a584..971d53349b6f 100644
--- a/include/linux/i3c/device.h
+++ b/include/linux/i3c/device.h
@@ -25,7 +25,7 @@
  * @I3C_ERROR_M2: M2 error
  *
  * These are the standard error codes as defined by the I3C specification.
- * When -EIO is returned by the i3c_device_do_priv_xfers() or
+ * When -EIO is returned by the i3c_device_do_i3c_xfers() or
  * i3c_device_send_hdr_cmds() one can check the error code in
  * &struct_i3c_xfer.err or &struct i3c_hdr_cmd.err to get a better idea of
  * what went wrong.
@@ -79,9 +79,6 @@ struct i3c_xfer {
 	enum i3c_error_code err;
 };
 
-/* keep back compatible */
-#define i3c_priv_xfer i3c_xfer
-
 /**
  * enum i3c_dcr - I3C DCR values
  * @I3C_DCR_GENERIC_DEVICE: generic I3C device
@@ -308,15 +305,23 @@ static __always_inline void i3c_i2c_driver_unregister(struct i3c_driver *i3cdrv,
 		      i3c_i2c_driver_unregister,	\
 		      __i2cdrv)
 
+#if IS_ENABLED(CONFIG_I3C)
 int i3c_device_do_xfers(struct i3c_device *dev, struct i3c_xfer *xfers,
 			int nxfers, enum i3c_xfer_mode mode);
+u32 i3c_device_get_supported_xfer_mode(struct i3c_device *dev);
+#else
+static inline int
+i3c_device_do_xfers(struct i3c_device *dev, struct i3c_xfer *xfers,
+		    int nxfers, enum i3c_xfer_mode mode)
+{
+	return -EOPNOTSUPP;
+}
 
-static inline int i3c_device_do_priv_xfers(struct i3c_device *dev,
-					   struct i3c_xfer *xfers,
-					   int nxfers)
+static inline u32 i3c_device_get_supported_xfer_mode(struct i3c_device *dev)
 {
-	return i3c_device_do_xfers(dev, xfers, nxfers, I3C_SDR);
+	return 0;
 }
+#endif
 
 int i3c_device_do_setdasa(struct i3c_device *dev);
 
@@ -358,6 +363,5 @@ int i3c_device_request_ibi(struct i3c_device *dev,
 void i3c_device_free_ibi(struct i3c_device *dev);
 int i3c_device_enable_ibi(struct i3c_device *dev);
 int i3c_device_disable_ibi(struct i3c_device *dev);
-u32 i3c_device_get_supported_xfer_mode(struct i3c_device *dev);
 
 #endif /* I3C_DEV_H */
diff --git a/include/linux/i3c/master.h b/include/linux/i3c/master.h
index 58d01ed4cce7..592b646f6134 100644
--- a/include/linux/i3c/master.h
+++ b/include/linux/i3c/master.h
@@ -462,6 +462,8 @@ struct i3c_bus {
  * @enable_hotjoin: enable hot join event detect.
  * @disable_hotjoin: disable hot join event detect.
  * @set_speed: adjust I3C open drain mode timing.
+ * @set_dev_nack_retry: configure device NACK retry count for the master
+ *                      controller.
  */
 struct i3c_master_controller_ops {
 	int (*bus_init)(struct i3c_master_controller *master);
@@ -491,6 +493,8 @@ struct i3c_master_controller_ops {
 	int (*enable_hotjoin)(struct i3c_master_controller *master);
 	int (*disable_hotjoin)(struct i3c_master_controller *master);
 	int (*set_speed)(struct i3c_master_controller *master, enum i3c_open_drain_speed speed);
+	int (*set_dev_nack_retry)(struct i3c_master_controller *master,
+				  unsigned long dev_nack_retry_cnt);
 };
 
 /**
@@ -505,6 +509,8 @@ struct i3c_master_controller_ops {
  * @secondary: true if the master is a secondary master
  * @init_done: true when the bus initialization is done
  * @hotjoin: true if the master support hotjoin
+ * @rpm_allowed: true if Runtime PM allowed
+ * @rpm_ibi_allowed: true if IBI and Hot-Join allowed while runtime suspended
  * @boardinfo.i3c: list of I3C  boardinfo objects
  * @boardinfo.i2c: list of I2C boardinfo objects
  * @boardinfo: board-level information attached to devices connected on the bus
@@ -514,6 +520,7 @@ struct i3c_master_controller_ops {
  *	in a thread context. Typical examples are Hot Join processing which
  *	requires taking the bus lock in maintenance, which in turn, can only
  *	be done from a sleep-able context
+ * @dev_nack_retry_count: retry count when slave device nack
  *
  * A &struct i3c_master_controller has to be registered to the I3C subsystem
  * through i3c_master_register(). None of &struct i3c_master_controller fields
@@ -528,12 +535,15 @@ struct i3c_master_controller {
 	unsigned int secondary : 1;
 	unsigned int init_done : 1;
 	unsigned int hotjoin: 1;
+	unsigned int rpm_allowed: 1;
+	unsigned int rpm_ibi_allowed: 1;
 	struct {
 		struct list_head i3c;
 		struct list_head i2c;
 	} boardinfo;
 	struct i3c_bus bus;
 	struct workqueue_struct *wq;
+	unsigned int dev_nack_retry_count;
 };
 
 /**
@@ -595,6 +605,7 @@ int i3c_master_get_free_addr(struct i3c_master_controller *master,
 int i3c_master_add_i3c_dev_locked(struct i3c_master_controller *master,
 				  u8 addr);
 int i3c_master_do_daa(struct i3c_master_controller *master);
+int i3c_master_do_daa_ext(struct i3c_master_controller *master, bool rstdaa);
 struct i3c_dma *i3c_master_dma_map_single(struct device *dev, void *ptr,
 					  size_t len, bool force_bounce,
 					  enum dma_data_direction dir);
diff --git a/include/linux/platform_data/mipi-i3c-hci.h b/include/linux/platform_data/mipi-i3c-hci.h
new file mode 100644
index 000000000000..ab7395f455f9
--- /dev/null
+++ b/include/linux/platform_data/mipi-i3c-hci.h
@@ -0,0 +1,15 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef INCLUDE_PLATFORM_DATA_MIPI_I3C_HCI_H
+#define INCLUDE_PLATFORM_DATA_MIPI_I3C_HCI_H
+
+#include <linux/compiler_types.h>
+
+/**
+ * struct mipi_i3c_hci_platform_data - Platform-dependent data for mipi_i3c_hci
+ * @base_regs: Register set base address (to support multi-bus instances)
+ */
+struct mipi_i3c_hci_platform_data {
+	void __iomem *base_regs;
+};
+
+#endif