diff options
| author | Alan Cox <alan@lxorguk.ukuu.org.uk> | 2002-10-31 19:43:49 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@home.transmeta.com> | 2002-10-31 19:43:49 -0800 |
| commit | 88af9fa8d6b7c17e5d262e3693bb01d13b46addb (patch) | |
| tree | a5bc3a16deeba33ba068bf8153823ce70d8433e9 /include | |
| parent | 9ce59cdcbd2d6412501f5c826f68ea94d9afba02 (diff) | |
[PATCH] arch specific files for MMUless NEC v850 port
This is the V850 support maintained by Miles Bader at NEC
Again this is just arch and include/asm- files. It matches 2.5.45-uc1 + v850
fixes which is close to what was in my old tree (some clean up done since then)
plus Kconfig
Diffstat (limited to 'include')
99 files changed, 6393 insertions, 0 deletions
diff --git a/include/asm-v850/a.out.h b/include/asm-v850/a.out.h new file mode 100644 index 000000000000..e9439a0708f6 --- /dev/null +++ b/include/asm-v850/a.out.h @@ -0,0 +1,21 @@ +#ifndef __V850_A_OUT_H__ +#define __V850_A_OUT_H__ + +struct exec +{ + unsigned long a_info; /* Use macros N_MAGIC, etc for access */ + unsigned a_text; /* length of text, in bytes */ + unsigned a_data; /* length of data, in bytes */ + unsigned a_bss; /* length of uninitialized data area for file, in bytes */ + unsigned a_syms; /* length of symbol table data in file, in bytes */ + unsigned a_entry; /* start address */ + unsigned a_trsize; /* length of relocation info for text, in bytes */ + unsigned a_drsize; /* length of relocation info for data, in bytes */ +}; + +#define N_TRSIZE(a) ((a).a_trsize) +#define N_DRSIZE(a) ((a).a_drsize) +#define N_SYMSIZE(a) ((a).a_syms) + + +#endif /* __V850_A_OUT_H__ */ diff --git a/include/asm-v850/anna.h b/include/asm-v850/anna.h new file mode 100644 index 000000000000..d5c0cd5ef5de --- /dev/null +++ b/include/asm-v850/anna.h @@ -0,0 +1,150 @@ +/* + * include/asm-v850/anna.h -- Anna V850E2 evaluation cpu chip/board + * + * Copyright (C) 2001,2002 NEC Corporation + * Copyright (C) 2001,2002 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_ANNA_H__ +#define __V850_ANNA_H__ + + +#define CPU_ARCH "v850e2" +#define CPU_MODEL "v850e2/anna" +#define CPU_MODEL_LONG "NEC V850E2/Anna" +#define PLATFORM "anna" +#define PLATFORM_LONG "NEC/Midas lab V850E2/Anna evaluation board" + +#define CPU_CLOCK_FREQ 200000000 /* 200MHz */ +#define SYS_CLOCK_FREQ 33300000 /* 33.3MHz */ + + +/* 1MB of static RAM. This memory is mirrored 64 times. */ +#define SRAM_ADDR 0x04000000 +#define SRAM_SIZE 0x00100000 /* 1MB */ +/* 64MB of DRAM. */ +#define SDRAM_ADDR 0x08000000 +#define SDRAM_SIZE 0x04000000 /* 64MB */ + + +/* For <asm/page.h> */ +#define PAGE_OFFSET SRAM_ADDR + +/* We use on-chip RAM, for a few miscellaneous variables that must be + accessible using a load instruction relative to R0. The Anna chip has + 128K of `dLB' ram nominally located at 0xFFF00000, but it's mirrored + every 128K, so we can use the `last mirror' (except for the portion at + the top which is overridden by I/O space). In addition, the early + sample chip we're using has lots of memory errors in the dLB ram, so we + use a specially chosen location that has at least 20 bytes of contiguous + valid memory (xxxF0020 - xxxF003F). */ +#define R0_RAM_ADDR 0xFFFF8020 + + +/* Anna specific control registers. */ +#define ANNA_CSC_ADDR(n) (0xFFFFF060 + (n) * 2) +#define ANNA_CSC(n) (*(volatile u16 *)ANNA_CSC_ADDR(n)) +#define ANNA_BPC_ADDR 0xFFFFF064 +#define ANNA_BPC (*(volatile u16 *)ANNA_BPC_ADDR) +#define ANNA_BSC_ADDR 0xFFFFF066 +#define ANNA_BSC (*(volatile u16 *)ANNA_BSC_ADDR) +#define ANNA_BEC_ADDR 0xFFFFF068 +#define ANNA_BEC (*(volatile u16 *)ANNA_BEC_ADDR) +#define ANNA_BHC_ADDR 0xFFFFF06A +#define ANNA_BHC (*(volatile u16 *)ANNA_BHC_ADDR) +#define ANNA_BCT_ADDR(n) (0xFFFFF480 + (n) * 2) +#define ANNA_BCT(n) (*(volatile u16 *)ANNA_BCT_ADDR(n)) +#define ANNA_DWC_ADDR(n) (0xFFFFF484 + (n) * 2) +#define ANNA_DWC(n) (*(volatile u16 *)ANNA_DWC_ADDR(n)) +#define ANNA_BCC_ADDR 0xFFFFF488 +#define ANNA_BCC (*(volatile u16 *)ANNA_BCC_ADDR) +#define ANNA_ASC_ADDR 0xFFFFF48A +#define ANNA_ASC (*(volatile u16 *)ANNA_ASC_ADDR) +#define ANNA_LBS_ADDR 0xFFFFF48E +#define ANNA_LBS (*(volatile u16 *)ANNA_LBS_ADDR) +#define ANNA_SCR3_ADDR 0xFFFFF4AC +#define ANNA_SCR3 (*(volatile u16 *)ANNA_SCR3_ADDR) +#define ANNA_RFS3_ADDR 0xFFFFF4AE +#define ANNA_RFS3 (*(volatile u16 *)ANNA_RFS3_ADDR) +#define ANNA_ILBEN_ADDR 0xFFFFF7F2 +#define ANNA_ILBEN (*(volatile u16 *)ANNA_ILBEN_ADDR) + + +/* I/O port P0-P3. */ +/* Direct I/O. Bits 0-7 are pins Pn0-Pn7. */ +#define ANNA_PORT_IO_ADDR(n) (0xFFFFF400 + (n) * 2) +#define ANNA_PORT_IO(n) (*(volatile u8 *)ANNA_PORT_IO_ADDR(n)) +/* Port mode (for direct I/O, 0 = output, 1 = input). */ +#define ANNA_PORT_PM_ADDR(n) (0xFFFFF410 + (n) * 2) +#define ANNA_PORT_PM(n) (*(volatile u8 *)ANNA_PORT_PM_ADDR(n)) + + +/* NB85E-style interrupt system. */ +#include <asm/nb85e_intc.h> + +/* Hardware-specific interrupt numbers (in the kernel IRQ namespace). */ +#define IRQ_INTP(n) (n) /* Pnnn (pin) interrupts 0-15 */ +#define IRQ_INTP_NUM 16 +#define IRQ_INTOV(n) (0x10 + (n)) /* 0-2 */ +#define IRQ_INTOV_NUM 2 +#define IRQ_INTCCC(n) (0x12 + (n)) +#define IRQ_INTCCC_NUM 4 +#define IRQ_INTCMD(n) (0x16 + (n)) /* interval timer interrupts 0-5 */ +#define IRQ_INTCMD_NUM 6 +#define IRQ_INTDMA(n) (0x1C + (n)) /* DMA interrupts 0-3 */ +#define IRQ_INTDMA_NUM 4 +#define IRQ_INTDMXER 0x20 +#define IRQ_INTSRE(n) (0x21 + (n)*3) /* UART 0-1 reception error */ +#define IRQ_INTSRE_NUM 2 +#define IRQ_INTSR(n) (0x22 + (n)*3) /* UART 0-1 reception completion */ +#define IRQ_INTSR_NUM 2 +#define IRQ_INTST(n) (0x23 + (n)*3) /* UART 0-1 transmission completion */ +#define IRQ_INTST_NUM 2 + +#define NUM_CPU_IRQS 64 + +#ifndef __ASSEMBLY__ +/* Initialize chip interrupts. */ +extern void anna_init_irqs (void); +#endif + + +/* Anna UART details (basically the same as the V850E/MA1, but 2 channels). */ +#define NB85E_UART_NUM_CHANNELS 2 +#define NB85E_UART_BASE_FREQ (SYS_CLOCK_FREQ / 2) +#define NB85E_UART_CHIP_NAME "V850E2/NA85E2A" + +/* This is a function that gets called before configuring the UART. */ +#define NB85E_UART_PRE_CONFIGURE anna_uart_pre_configure +#ifndef __ASSEMBLY__ +extern void anna_uart_pre_configure (unsigned chan, + unsigned cflags, unsigned baud); +#endif + + +/* Timer C details. */ +#define NB85E_TIMER_C_BASE_ADDR 0xFFFFF600 + +/* Timer D details (the Anna actually has 5 of these; should change later). */ +#define NB85E_TIMER_D_BASE_ADDR 0xFFFFF540 +#define NB85E_TIMER_D_TMD_BASE_ADDR (NB85E_TIMER_D_BASE_ADDR + 0x0) +#define NB85E_TIMER_D_CMD_BASE_ADDR (NB85E_TIMER_D_BASE_ADDR + 0x2) +#define NB85E_TIMER_D_TMCD_BASE_ADDR (NB85E_TIMER_D_BASE_ADDR + 0x4) + +#define NB85E_TIMER_D_BASE_FREQ SYS_CLOCK_FREQ +#define NB85E_TIMER_D_TMCD_CS_MIN 1 /* min 2^1 divider */ + + +/* For <asm/param.h> */ +#ifndef HZ +#define HZ 100 +#endif + + +#endif /* __V850_ANNA_H__ */ diff --git a/include/asm-v850/asm.h b/include/asm-v850/asm.h new file mode 100644 index 000000000000..dd0cb2afccea --- /dev/null +++ b/include/asm-v850/asm.h @@ -0,0 +1,25 @@ +/* + * include/asm-v850/asm.h -- Macros for writing assembly code + * + * Copyright (C) 2001,02 NEC Corporation + * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#define G_ENTRY(name) \ + .align 4; \ + .globl name; \ + .type name,@function; \ + name +#define END(name) \ + .size name,.-name + +#define L_ENTRY(name) \ + .align 4; \ + .type name,@function; \ + name diff --git a/include/asm-v850/atomic.h b/include/asm-v850/atomic.h new file mode 100644 index 000000000000..582de7674ea8 --- /dev/null +++ b/include/asm-v850/atomic.h @@ -0,0 +1,89 @@ +/* + * include/asm-v850/atomic.h -- Atomic operations + * + * Copyright (C) 2001,02 NEC Corporation + * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_ATOMIC_H__ +#define __V850_ATOMIC_H__ + +#include <linux/config.h> + +#include <asm/system.h> + +#ifdef CONFIG_SMP +#error SMP not supported +#endif + +typedef struct { int counter; } atomic_t; + +#define ATOMIC_INIT(i) { (i) } + +#ifdef __KERNEL__ + +#define atomic_read(v) ((v)->counter) +#define atomic_set(v,i) (((v)->counter) = (i)) + +extern __inline__ int atomic_add_return (int i, volatile atomic_t *v) +{ + unsigned long flags; + int res; + + local_irq_save (flags); + res = v->counter + i; + v->counter = res; + local_irq_restore (flags); + + return res; +} + +static __inline__ int atomic_sub_return (int i, volatile atomic_t *v) +{ + unsigned long flags; + int res; + + local_irq_save (flags); + res = v->counter - i; + v->counter = res; + local_irq_restore (flags); + + return res; +} + +static __inline__ void atomic_clear_mask (unsigned long mask, unsigned long *addr) +{ + unsigned long flags; + + local_irq_save (flags); + *addr &= ~mask; + local_irq_restore (flags); +} + +#endif + +#define atomic_add(i, v) atomic_add_return ((i), (v)) +#define atomic_sub(i, v) atomic_sub_return ((i), (v)) + +#define atomic_dec_return(v) atomic_sub_return (1, (v)) +#define atomic_inc_return(v) atomic_add_return (1, (v)) +#define atomic_inc(v) atomic_inc_return (v) +#define atomic_dec(v) atomic_dec_return (v) + +#define atomic_sub_and_test(i,v) (atomic_sub_return ((i), (v)) == 0) +#define atomic_dec_and_test(v) (atomic_sub_return (1, (v)) == 0) +#define atomic_add_negative(i,v) (atomic_add_return ((i), (v)) < 0) + +/* Atomic operations are already serializing on ARM */ +#define smp_mb__before_atomic_dec() barrier() +#define smp_mb__after_atomic_dec() barrier() +#define smp_mb__before_atomic_inc() barrier() +#define smp_mb__after_atomic_inc() barrier() + +#endif /* __V850_ATOMIC_H__ */ diff --git a/include/asm-v850/bitops.h b/include/asm-v850/bitops.h new file mode 100644 index 000000000000..21c0b3c1c0a3 --- /dev/null +++ b/include/asm-v850/bitops.h @@ -0,0 +1,269 @@ +/* + * include/asm-v850/bitops.h -- Bit operations + * + * Copyright (C) 2001,02 NEC Corporation + * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> + * Copyright (C) 1992 Linus Torvalds. + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + */ + +#ifndef __V850_BITOPS_H__ +#define __V850_BITOPS_H__ + + +#include <linux/config.h> +#include <linux/compiler.h> /* unlikely */ +#include <asm/byteorder.h> /* swab32 */ +#include <asm/system.h> /* interrupt enable/disable */ + + +#ifdef __KERNEL__ + +/* + * The __ functions are not atomic + */ + +/* + * ffz = Find First Zero in word. Undefined if no zero exists, + * so code should check against ~0UL first.. + */ +extern __inline__ unsigned long ffz (unsigned long word) +{ + unsigned long result = 0; + + while (word & 1) { + result++; + word >>= 1; + } + return result; +} + + +/* In the following constant-bit-op macros, a "g" constraint is used when + we really need an integer ("i" constraint). This is to avoid + warnings/errors from the compiler in the case where the associated + operand _isn't_ an integer, and shouldn't produce bogus assembly because + use of that form is protected by a guard statement that checks for + constants, and should otherwise be removed by the optimizer. This + _usually_ works -- however, __builtin_constant_p returns true for a + variable with a known constant value too, and unfortunately gcc will + happily put the variable in a register and use the register for the "g" + constraint'd asm operand. To avoid the latter problem, we add a + constant offset to the operand and subtract it back in the asm code; + forcing gcc to do arithmetic on the value is usually enough to get it + to use a real constant value. This is horrible, and ultimately + unreliable too, but it seems to work for now (hopefully gcc will offer + us more control in the future, so we can do a better job). */ + +#define __const_bit_op(op, nr, addr) \ + ({ __asm__ (op " (%0 - 0x123), %1" \ + :: "g" (((nr) & 0x7) + 0x123), \ + "m" (*((char *)(addr) + ((nr) >> 3))) \ + : "memory"); }) +#define __var_bit_op(op, nr, addr) \ + ({ int __nr = (nr); \ + __asm__ (op " %0, [%1]" \ + :: "r" (__nr & 0x7), \ + "r" ((char *)(addr) + (__nr >> 3)) \ + : "memory"); }) +#define __bit_op(op, nr, addr) \ + ((__builtin_constant_p (nr) && (unsigned)(nr) <= 0x7FFFF) \ + ? __const_bit_op (op, nr, addr) \ + : __var_bit_op (op, nr, addr)) + +#define __set_bit(nr, addr) __bit_op ("set1", nr, addr) +#define __clear_bit(nr, addr) __bit_op ("clr1", nr, addr) +#define __change_bit(nr, addr) __bit_op ("not1", nr, addr) + +/* The bit instructions used by `non-atomic' variants are actually atomic. */ +#define set_bit __set_bit +#define clear_bit __clear_bit +#define change_bit __change_bit + + +#define __const_tns_bit_op(op, nr, addr) \ + ({ int __tns_res; \ + __asm__ ("tst1 (%1 - 0x123), %2; setf nz, %0; " op " (%1 - 0x123), %2" \ + : "=&r" (__tns_res) \ + : "g" (((nr) & 0x7) + 0x123), \ + "m" (*((char *)(addr) + ((nr) >> 3))) \ + : "memory"); \ + __tns_res; \ + }) +#define __var_tns_bit_op(op, nr, addr) \ + ({ int __nr = (nr); \ + int __tns_res; \ + __asm__ ("tst1 %1, [%2]; setf nz, %0; " op " %1, [%2]" \ + : "=&r" (__tns_res) \ + : "r" (__nr & 0x7), \ + "r" ((char *)(addr) + (__nr >> 3)) \ + : "memory"); \ + __tns_res; \ + }) +#define __tns_bit_op(op, nr, addr) \ + ((__builtin_constant_p (nr) && (unsigned)(nr) <= 0x7FFFF) \ + ? __const_tns_bit_op (op, nr, addr) \ + : __var_tns_bit_op (op, nr, addr)) +#define __tns_atomic_bit_op(op, nr, addr) \ + ({ int __tns_atomic_res, __tns_atomic_flags; \ + local_irq_save (__tns_atomic_flags); \ + __tns_atomic_res = __tns_bit_op (op, nr, addr); \ + local_irq_restore (__tns_atomic_flags); \ + __tns_atomic_res; \ + }) + +#define __test_and_set_bit(nr, addr) __tns_bit_op ("set1", nr, addr) +#define test_and_set_bit(nr, addr) __tns_atomic_bit_op ("set1", nr, addr) + +#define __test_and_clear_bit(nr, addr) __tns_bit_op ("clr1", nr, addr) +#define test_and_clear_bit(nr, addr) __tns_atomic_bit_op ("clr1", nr, addr) + +#define __test_and_change_bit(nr, addr) __tns_bit_op ("not1", nr, addr) +#define test_and_change_bit(nr, addr) __tns_atomic_bit_op ("not1", nr, addr) + + +#define __const_test_bit(nr, addr) \ + ({ int __test_bit_res; \ + __asm__ ("tst1 (%1 - 0x123), %2; setf nz, %0" \ + : "=r" (__test_bit_res) \ + : "g" (((nr) & 0x7) + 0x123), \ + "m" (*((const char *)(addr) + ((nr) >> 3)))); \ + __test_bit_res; \ + }) +extern __inline__ int __test_bit (int nr, void *addr) +{ + int res; + __asm__ ("tst1 %1, [%2]; setf nz, %0" + : "=r" (res) + : "r" (nr & 0x7), "r" (addr + (nr >> 3))); + return res; +} +#define test_bit(nr,addr) \ + ((__builtin_constant_p (nr) && (unsigned)(nr) <= 0x7FFFF) \ + ? __const_test_bit ((nr), (addr)) \ + : __test_bit ((nr), (addr))) + + +/* clear_bit doesn't provide any barrier for the compiler. */ +#define smp_mb__before_clear_bit() barrier () +#define smp_mb__after_clear_bit() barrier () + + +#define find_first_zero_bit(addr, size) \ + find_next_zero_bit ((addr), (size), 0) + +extern __inline__ int find_next_zero_bit (void *addr, int size, int offset) +{ + unsigned long *p = ((unsigned long *) addr) + (offset >> 5); + unsigned long result = offset & ~31UL; + unsigned long tmp; + + if (offset >= size) + return size; + size -= result; + offset &= 31UL; + if (offset) { + tmp = * (p++); + tmp |= ~0UL >> (32-offset); + if (size < 32) + goto found_first; + if (~tmp) + goto found_middle; + size -= 32; + result += 32; + } + while (size & ~31UL) { + if (~ (tmp = * (p++))) + goto found_middle; + result += 32; + size -= 32; + } + if (!size) + return result; + tmp = *p; + + found_first: + tmp |= ~0UL >> size; + found_middle: + return result + ffz (tmp); +} + +#define ffs(x) generic_ffs (x) +#define fls(x) generic_fls (x) +#define __ffs(x) ffs(x) + +/* + * This is just `generic_ffs' from <linux/bitops.h>, except that it assumes + * that at least one bit is set, and returns the real index of the bit + * (rather than the bit index + 1, like ffs does). + */ +static inline int sched_ffs(int x) +{ + int r = 0; + + if (!(x & 0xffff)) { + x >>= 16; + r += 16; + } + if (!(x & 0xff)) { + x >>= 8; + r += 8; + } + if (!(x & 0xf)) { + x >>= 4; + r += 4; + } + if (!(x & 3)) { + x >>= 2; + r += 2; + } + if (!(x & 1)) { + x >>= 1; + r += 1; + } + return r; +} + +/* + * Every architecture must define this function. It's the fastest + * way of searching a 140-bit bitmap where the first 100 bits are + * unlikely to be set. It's guaranteed that at least one of the 140 + * bits is set. + */ +static inline int sched_find_first_bit(unsigned long *b) +{ + unsigned offs = 0; + while (! *b) { + b++; + offs += 32; + } + return sched_ffs (*b) + offs; +} + +/* + * hweightN: returns the hamming weight (i.e. the number + * of bits set) of a N-bit word + */ +#define hweight32(x) generic_hweight32 (x) +#define hweight16(x) generic_hweight16 (x) +#define hweight8(x) generic_hweight8 (x) + +#define ext2_set_bit test_and_set_bit +#define ext2_clear_bit test_and_clear_bit +#define ext2_test_bit test_bit +#define ext2_find_first_zero_bit find_first_zero_bit +#define ext2_find_next_zero_bit find_next_zero_bit + +/* Bitmap functions for the minix filesystem. */ +#define minix_test_and_set_bit test_and_set_bit +#define minix_set_bit set_bit +#define minix_test_and_clear_bit test_and_clear_bit +#define minix_test_bit test_bit +#define minix_find_first_zero_bit find_first_zero_bit + +#endif /* __KERNEL__ */ + +#endif /* __V850_BITOPS_H__ */ diff --git a/include/asm-v850/bugs.h b/include/asm-v850/bugs.h new file mode 100644 index 000000000000..71110a65c1d7 --- /dev/null +++ b/include/asm-v850/bugs.h @@ -0,0 +1,16 @@ +/* + * include/asm-v850e/bugs.h + * + * Copyright (C) 1994 Linus Torvalds + */ + +/* + * This is included by init/main.c to check for architecture-dependent bugs. + * + * Needs: + * void check_bugs(void); + */ + +static void check_bugs(void) +{ +} diff --git a/include/asm-v850/byteorder.h b/include/asm-v850/byteorder.h new file mode 100644 index 000000000000..89bd9b0c84dc --- /dev/null +++ b/include/asm-v850/byteorder.h @@ -0,0 +1,47 @@ +/* + * include/asm-v850/byteorder.h -- Endian id and conversion ops + * + * Copyright (C) 2001 NEC Corporation + * Copyright (C) 2001 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_BYTEORDER_H__ +#define __V850_BYTEORDER_H__ + +#include <asm/types.h> + +#ifdef __GNUC__ + +static __inline__ __const__ __u32 ___arch__swab32 (__u32 word) +{ + __u32 res; + __asm__ ("bsw %1, %0" : "=r" (res) : "r" (word)); + return res; +} + +static __inline__ __const__ __u16 ___arch__swab16 (__u16 half_word) +{ + __u16 res; + __asm__ ("bsh %1, %0" : "=r" (res) : "r" (half_word)); + return res; +} + +#define __arch__swab32(x) ___arch__swab32(x) +#define __arch__swab16(x) ___arch__swab16(x) + +#if !defined(__STRICT_ANSI__) || defined(__KERNEL__) +# define __BYTEORDER_HAS_U64__ +# define __SWAB_64_THRU_32__ +#endif + +#endif /* __GNUC__ */ + +#include <linux/byteorder/little_endian.h> + +#endif /* __V850_BYTEORDER_H__ */ diff --git a/include/asm-v850/cache.h b/include/asm-v850/cache.h new file mode 100644 index 000000000000..027f8c9090cd --- /dev/null +++ b/include/asm-v850/cache.h @@ -0,0 +1,25 @@ +/* + * include/asm-v850/cache.h -- Cache operations + * + * Copyright (C) 2001 NEC Corporation + * Copyright (C) 2001 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_CACHE_H__ +#define __V850_CACHE_H__ + +/* All cache operations are machine-dependent. */ +#include <asm/machdep.h> + +#ifndef L1_CACHE_BYTES +/* This processor has no cache, so just choose an arbitrary value. */ +#define L1_CACHE_BYTES 16 +#endif + +#endif /* __V850_CACHE_H__ */ diff --git a/include/asm-v850/cacheflush.h b/include/asm-v850/cacheflush.h new file mode 100644 index 000000000000..f0752d11241c --- /dev/null +++ b/include/asm-v850/cacheflush.h @@ -0,0 +1,42 @@ +/* + * include/asm-v850/cacheflush.h + * + * Copyright (C) 2001,02 NEC Corporation + * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_CACHEFLUSH_H__ +#define __V850_CACHEFLUSH_H__ + +/* Somebody depends on this; sigh... */ +#include <linux/mm.h> + +#include <asm/setup.h> +#include <asm/machdep.h> + + +#ifndef flush_cache_all +/* If there's no flush_cache_all macro defined by <asm/machdep.h>, then + this processor has no cache, so just define these as nops. */ + +#define flush_cache_all() ((void)0) +#define flush_cache_mm(mm) ((void)0) +#define flush_cache_range(vma, start, end) ((void)0) +#define flush_cache_page(vma, vmaddr) ((void)0) +#define flush_page_to_ram(page) ((void)0) +#define flush_dcache_page(page) ((void)0) +#define flush_icache() ((void)0) +#define flush_icache_range(start, end) ((void)0) +#define flush_icache_page(vma,pg) ((void)0) +#define flush_icache_user_range(vma,pg,adr,len) ((void)0) +#define flush_cache_sigtramp(vaddr) ((void)0) + +#endif /* !flush_cache_all */ + +#endif /* __V850_CACHEFLUSH_H__ */ diff --git a/include/asm-v850/checksum.h b/include/asm-v850/checksum.h new file mode 100644 index 000000000000..d3aedb7bfc5c --- /dev/null +++ b/include/asm-v850/checksum.h @@ -0,0 +1,115 @@ +/* + * include/asm-v850/checksum.h -- Checksum ops + * + * Copyright (C) 2001 NEC Corporation + * Copyright (C) 2001 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_CHECKSUM_H__ +#define __V850_CHECKSUM_H__ + +/* + * computes the checksum of a memory block at buff, length len, + * and adds in "sum" (32-bit) + * + * returns a 32-bit number suitable for feeding into itself + * or csum_tcpudp_magic + * + * this function must be called with even lengths, except + * for the last fragment, which may be odd + * + * it's best to have buff aligned on a 32-bit boundary + */ +extern unsigned int csum_partial (const unsigned char * buff, int len, + unsigned int sum); + +/* + * the same as csum_partial, but copies from src while it + * checksums + * + * here even more important to align src and dst on a 32-bit (or even + * better 64-bit) boundary + */ +extern unsigned csum_partial_copy (const char *src, char *dst, int len, + unsigned sum); + + +/* + * the same as csum_partial_copy, but copies from user space. + * + * here even more important to align src and dst on a 32-bit (or even + * better 64-bit) boundary + */ +extern unsigned csum_partial_copy_from_user (const char *src, char *dst, + int len, unsigned sum, + int *csum_err); + +#define csum_partial_copy_nocheck(src, dst, len, sum) \ + csum_partial_copy ((src), (dst), (len), (sum)) + +unsigned short ip_fast_csum (unsigned char *iph, unsigned int ihl); + +/* + * Fold a partial checksum + */ +static inline unsigned int csum_fold (unsigned long sum) +{ + unsigned int result; + /* + %0 %1 + hsw %1, %0 H L L H + add %1, %0 H L H+L+C H+L + */ + asm ("hsw %1, %0; add %1, %0" : "=&r" (result) : "r" (sum)); + return (~result) >> 16; +} + + +/* + * computes the checksum of the TCP/UDP pseudo-header + * returns a 16-bit checksum, already complemented + */ +static inline unsigned int +csum_tcpudp_nofold (unsigned long saddr, unsigned long daddr, + unsigned short len, + unsigned short proto, unsigned int sum) +{ + int __carry; + __asm__ ("add %2, %0;" + "setf c, %1;" + "add %1, %0;" + "add %3, %0;" + "setf c, %1;" + "add %1, %0;" + "add %4, %0;" + "setf c, %1;" + "add %1, %0" + : "=&r" (sum), "=&r" (__carry) + : "r" (daddr), "r" (saddr), + "r" (ntohs (len) + (proto << 8)), + "0" (sum)); + return sum; +} + +static inline unsigned short int +csum_tcpudp_magic (unsigned long saddr, unsigned long daddr, + unsigned short len, + unsigned short proto, unsigned int sum) +{ + return csum_fold (csum_tcpudp_nofold (saddr, daddr, len, proto, sum)); +} + +/* + * this routine is used for miscellaneous IP-like checksums, mainly + * in icmp.c + */ +extern unsigned short ip_compute_csum (const unsigned char * buff, int len); + + +#endif /* __V850_CHECKSUM_H__ */ diff --git a/include/asm-v850/clinkage.h b/include/asm-v850/clinkage.h new file mode 100644 index 000000000000..01289d9a9503 --- /dev/null +++ b/include/asm-v850/clinkage.h @@ -0,0 +1,25 @@ +/* + * include/asm-v850/clinkage.h -- Macros to reflect C symbol-naming conventions + * + * Copyright (C) 2001,02 NEC Corporatione + * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __CLINKAGE_H__ +#define __V850_CLINKAGE_H__ + +#include <asm/macrology.h> +#include <asm/asm.h> + +#define C_SYMBOL_NAME(name) macrology_paste(_, name) +#define C_SYMBOL_STRING(name) macrology_stringify(C_SYMBOL_NAME(name)) +#define C_ENTRY(name) G_ENTRY(C_SYMBOL_NAME(name)) +#define C_END(name) END(C_SYMBOL_NAME(name)) + +#endif /* __V850_CLINKAGE_H__ */ diff --git a/include/asm-v850/current.h b/include/asm-v850/current.h new file mode 100644 index 000000000000..1d470a9b0bbd --- /dev/null +++ b/include/asm-v850/current.h @@ -0,0 +1,44 @@ +/* + * include/asm-v850/current.h -- Current task + * + * Copyright (C) 2001,02 NEC Corporation + * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_CURRENT_H__ +#define __V850_CURRENT_H__ + +#include <asm/macrology.h> +#include <asm/thread_info.h> + + +/* Register used to hold the current task pointer while in the kernel. + Any `call clobbered' register without a special meaning should be OK, + but check asm/v850/kernel/entry.S to be sure. */ +#define CURRENT_TASK_REGNUM 16 +#define CURRENT_TASK macrology_paste (r, CURRENT_TASK_REGNUM) + + +#ifdef __ASSEMBLY__ + +/* Put a pointer to the current task structure into REG. */ +#define GET_CURRENT_TASK(reg) \ + GET_CURRENT_THREAD(reg); \ + ld.w TI_TASK[reg], reg + +#else /* !__ASSEMBLY__ */ + +/* A pointer to the current task. */ +register struct task_struct *current \ + __asm__ (macrology_stringify (CURRENT_TASK)); + +#endif /* __ASSEMBLY__ */ + + +#endif /* _V850_CURRENT_H */ diff --git a/include/asm-v850/delay.h b/include/asm-v850/delay.h new file mode 100644 index 000000000000..bad311ba44b5 --- /dev/null +++ b/include/asm-v850/delay.h @@ -0,0 +1,46 @@ +/* + * include/asm-v850/delay.h -- Delay routines, using a pre-computed + * "loops_per_second" value + * + * Copyright (C) 2001 NEC Corporation + * Copyright (C) 2001 Miles Bader <miles@gnu.org> + * Copyright (C) 1994 Hamish Macdonald + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + */ + +#ifndef __V850_DELAY_H__ +#define __V850_DELAY_H__ + +#include <asm/param.h> + +extern __inline__ void __delay(unsigned long loops) +{ + __asm__ __volatile__ ("1: add -1, %0; bnz 1b" + : "=r" (loops) : "0" (loops)); +} + +/* + * Use only for very small delays ( < 1 msec). Should probably use a + * lookup table, really, as the multiplications take much too long with + * short delays. This is a "reasonable" implementation, though (and the + * first constant multiplications gets optimized away if the delay is + * a constant) + */ + +extern unsigned long loops_per_jiffy; + +extern __inline__ void udelay(unsigned long usecs) +{ + register unsigned long full_loops, part_loops; + + full_loops = ((usecs * HZ) / 1000000) * loops_per_jiffy; + usecs %= (1000000 / HZ); + part_loops = (usecs * HZ * loops_per_jiffy) / 1000000; + + __delay(full_loops + part_loops); +} + +#endif /* __V850_DELAY_H__ */ diff --git a/include/asm-v850/div64.h b/include/asm-v850/div64.h new file mode 100644 index 000000000000..165518b4623c --- /dev/null +++ b/include/asm-v850/div64.h @@ -0,0 +1,11 @@ +#ifndef __V850_DIV64_H__ +#define __V850_DIV64_H__ + +/* We're not 64-bit, but... */ +#define do_div(n,base) ({ \ + int __res; \ + __res = ((unsigned long) n) % (unsigned) base; \ + n = ((unsigned long) n) / (unsigned) base; \ + __res; }) + +#endif /* __V850_DIV64_H__ */ diff --git a/include/asm-v850/dma.h b/include/asm-v850/dma.h new file mode 100644 index 000000000000..2369849e2d0a --- /dev/null +++ b/include/asm-v850/dma.h @@ -0,0 +1,18 @@ +#ifndef __V850_DMA_H__ +#define __V850_DMA_H__ + +/* What should this be? */ +#define MAX_DMA_ADDRESS 0xFFFFFFFF + +/* reserve a DMA channel */ +extern int request_dma (unsigned int dmanr, const char * device_id); +/* release it again */ +extern void free_dma (unsigned int dmanr); + +#ifdef CONFIG_PCI +extern int isa_dma_bridge_buggy; +#else +#define isa_dma_bridge_buggy (0) +#endif + +#endif /* __V850_DMA_H__ */ diff --git a/include/asm-v850/elf.h b/include/asm-v850/elf.h new file mode 100644 index 000000000000..5d0ac7fd8ef8 --- /dev/null +++ b/include/asm-v850/elf.h @@ -0,0 +1,75 @@ +#ifndef __V850_ELF_H__ +#define __V850_ELF_H__ + +/* + * ELF register definitions.. + */ + +#include <asm/ptrace.h> +#include <asm/user.h> +#include <asm/byteorder.h> + +typedef unsigned long elf_greg_t; + +#define ELF_NGREG (sizeof (struct pt_regs) / sizeof(elf_greg_t)) +typedef elf_greg_t elf_gregset_t[ELF_NGREG]; + +typedef struct user_fpu_struct elf_fpregset_t; + +/* + * This is used to ensure we don't load something for the wrong architecture. + */ +#define elf_check_arch(x) ( (x)->e_machine == EM_CYGNUS_V850 ) + +/* + * These are used to set parameters in the core dumps. + */ +#define ELF_CLASS ELFCLASS32 +#ifdef __LITTLE_ENDIAN__ +#define ELF_DATA ELFDATA2LSB +#else +#define ELF_DATA ELFDATA2MSB +#endif +#define ELF_ARCH EM_V850 + +#define USE_ELF_CORE_DUMP +#define ELF_EXEC_PAGESIZE 4096 + + +#define ELF_CORE_COPY_REGS(_dest,_regs) \ + memcpy((char *) &_dest, (char *) _regs, \ + sizeof(struct pt_regs)); + +/* This yields a mask that user programs can use to figure out what + instruction set this CPU supports. This could be done in user space, + but it's not easy, and we've already done it here. */ + +#define ELF_HWCAP (0) + +/* This yields a string that ld.so will use to load implementation + specific libraries for optimization. This is more specific in + intent than poking at uname or /proc/cpuinfo. + + For the moment, we have only optimizations for the Intel generations, + but that could change... */ + +#define ELF_PLATFORM (NULL) + +#define ELF_PLAT_INIT(_r) \ + do { \ + _r->gpr[0] = _r->gpr[1] = _r->gpr[2] = _r->gpr[3] = \ + _r->gpr[4] = _r->gpr[5] = _r->gpr[6] = _r->gpr[7] = \ + _r->gpr[8] = _r->gpr[9] = _r->gpr[10] = _r->gpr[11] = \ + _r->gpr[12] = _r->gpr[13] = _r->gpr[14] = _r->gpr[15] = \ + _r->gpr[16] = _r->gpr[17] = _r->gpr[18] = _r->gpr[19] = \ + _r->gpr[20] = _r->gpr[21] = _r->gpr[22] = _r->gpr[23] = \ + _r->gpr[24] = _r->gpr[25] = _r->gpr[26] = _r->gpr[27] = \ + _r->gpr[28] = _r->gpr[29] = _r->gpr[30] = _r->gpr[31] = \ + 0; \ + } while (0) + +#ifdef __KERNEL__ +#define SET_PERSONALITY(ex, ibcs2) set_personality(PER_LINUX_32BIT) +#endif + +#endif /* __V850_ELF_H__ */ diff --git a/include/asm-v850/entry.h b/include/asm-v850/entry.h new file mode 100644 index 000000000000..c3e277cff21e --- /dev/null +++ b/include/asm-v850/entry.h @@ -0,0 +1,128 @@ +/* + * include/asm-v850/entry.h -- Definitions used by low-level trap handlers + * + * Copyright (C) 2001,02 NEC Corporation + * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_ENTRY_H__ +#define __V850_ENTRY_H__ + + +#include <asm/ptrace.h> +#include <asm/machdep.h> + + +/* If true, system calls save and restore all registers (except result + registers, of course). If false, then `call clobbered' registers + will not be preserved, on the theory that system calls are basically + function calls anyway, and the caller should be able to deal with it. + This is a security risk, of course, as `internal' values may leak out + after a system call, but that certainly doesn't matter very much for + a processor with no MMU protection! For a protected-mode kernel, it + would be faster to just zero those registers before returning. */ +#define TRAPS_PRESERVE_CALL_CLOBBERED_REGS 0 + +/* If TRAPS_PRESERVE_CALL_CLOBBERED_REGS is false, then zero `call + clobbered' registers before returning from a system call. */ +#define TRAPS_ZERO_CALL_CLOBBERED_REGS 0 + + +/* These are special variables using by the kernel trap/interrupt code + to save registers in, at a time when there are no spare registers we + can use to do so, and we can't depend on the value of the stack + pointer. This means that they must be within a signed 16-bit + displacement of 0x00000000. */ + +#define KERNEL_VAR_SPACE_ADDR R0_RAM_ADDR + +#ifdef __ASSEMBLY__ +#define KERNEL_VAR(addr) addr[r0] +#else +#define KERNEL_VAR(addr) (*(volatile unsigned long *)(addr)) +#endif + +/* Kernel stack pointer, 4 bytes. */ +#define KSP_ADDR (KERNEL_VAR_SPACE_ADDR + 0) +#define KSP KERNEL_VAR (KSP_ADDR) +/* 1 if in kernel-mode, 0 if in user mode, 1 byte. */ +#define KM_ADDR (KERNEL_VAR_SPACE_ADDR + 4) +#define KM KERNEL_VAR (KM_ADDR) +/* Temporary storage for interrupt handlers, 4 bytes. */ +#define INT_SCRATCH_ADDR (KERNEL_VAR_SPACE_ADDR + 8) +#define INT_SCRATCH KERNEL_VAR (INT_SCRATCH_ADDR) +/* Where the stack-pointer is saved when jumping to various sorts of + interrupt handlers. ENTRY_SP is used by everything except NMIs, + which have their own location. Higher-priority NMIs can clobber the + value written by a lower priority NMI, since they can't be disabled, + but that's OK, because only NMI0 (the lowest-priority one) is allowed + to return. */ +#define ENTRY_SP_ADDR (KERNEL_VAR_SPACE_ADDR + 12) +#define ENTRY_SP KERNEL_VAR (ENTRY_SP_ADDR) +#define NMI_ENTRY_SP_ADDR (KERNEL_VAR_SPACE_ADDR + 16) +#define NMI_ENTRY_SP KERNEL_VAR (NMI_ENTRY_SP_ADDR) + +#ifdef CONFIG_RESET_GUARD +/* Used to detect unexpected resets (since the v850 has no MMU, any call + through a null pointer will jump to the reset vector). We detect + such resets by checking for a magic value, RESET_GUARD_ACTIVE, in + this location. Properly resetting the machine stores zero there, so + it shouldn't trigger the guard; the power-on value is uncertain, but + it's unlikely to be RESET_GUARD_ACTIVE. */ +#define RESET_GUARD_ADDR (KERNEL_VAR_SPACE_ADDR + 28) +#define RESET_GUARD KERNEL_VAR (RESET_GUARD_ADDR) +#define RESET_GUARD_ACTIVE 0xFAB4BEEF +#endif /* CONFIG_RESET_GUARD */ + +#ifdef CONFIG_V850E_MA1_HIGHRES_TIMER +#define HIGHRES_TIMER_SLOW_TICKS_ADDR (KERNEL_VAR_SPACE_ADDR + 32) +#define HIGHRES_TIMER_SLOW_TICKS KERNEL_VAR (HIGHRES_TIMER_SLOW_TICKS_ADDR) +#endif /* CONFIG_V850E_MA1_HIGHRES_TIMER */ + +#ifndef __ASSEMBLY__ + +#ifdef CONFIG_RESET_GUARD +/* Turn off reset guard, so that resetting the machine works normally. + This should be called in the various machine_halt, etc., functions. */ +static inline void disable_reset_guard (void) +{ + RESET_GUARD = 0; +} +#endif /* CONFIG_RESET_GUARD */ + +#endif /* !__ASSEMBLY__ */ + + +/* A `state save frame' is a struct pt_regs preceded by some extra space + suitable for a function call stack frame. */ + +/* Amount of room on the stack reserved for arguments and to satisfy the + C calling conventions, in addition to the space used by the struct + pt_regs that actually holds saved values. */ +#define STATE_SAVE_ARG_SPACE (6*4) /* Up to six arguments. */ + + +#ifdef __ASSEMBLY__ + +/* The size of a state save frame. */ +#define STATE_SAVE_SIZE (PT_SIZE + STATE_SAVE_ARG_SPACE) + +#else /* !__ASSEMBLY__ */ + +/* The size of a state save frame. */ +#define STATE_SAVE_SIZE (sizeof (struct pt_regs) + STATE_SAVE_ARG_SPACE) + +#endif /* __ASSEMBLY__ */ + + +/* Offset of the struct pt_regs in a state save frame. */ +#define STATE_SAVE_PT_OFFSET STATE_SAVE_ARG_SPACE + + +#endif /* __V850_ENTRY_H__ */ diff --git a/include/asm-v850/errno.h b/include/asm-v850/errno.h new file mode 100644 index 000000000000..31c91df01205 --- /dev/null +++ b/include/asm-v850/errno.h @@ -0,0 +1,6 @@ +#ifndef __V850_ERRNO_H__ +#define __V850_ERRNO_H__ + +#include <asm-generic/errno.h> + +#endif /* __V850_ERRNO_H__ */ diff --git a/include/asm-v850/fcntl.h b/include/asm-v850/fcntl.h new file mode 100644 index 000000000000..42e358ff0752 --- /dev/null +++ b/include/asm-v850/fcntl.h @@ -0,0 +1,86 @@ +#ifndef __V850_FCNTL_H__ +#define __V850_FCNTL_H__ + +/* open/fcntl - O_SYNC is only implemented on blocks devices and on files + located on an ext2 file system */ +#define O_ACCMODE 0003 +#define O_RDONLY 00 +#define O_WRONLY 01 +#define O_RDWR 02 +#define O_CREAT 0100 /* not fcntl */ +#define O_EXCL 0200 /* not fcntl */ +#define O_NOCTTY 0400 /* not fcntl */ +#define O_TRUNC 01000 /* not fcntl */ +#define O_APPEND 02000 +#define O_NONBLOCK 04000 +#define O_NDELAY O_NONBLOCK +#define O_SYNC 010000 +#define FASYNC 020000 /* fcntl, for BSD compatibility */ +#define O_DIRECTORY 040000 /* must be a directory */ +#define O_NOFOLLOW 0100000 /* don't follow links */ +#define O_DIRECT 0200000 /* direct disk access hint - currently ignored */ +#define O_LARGEFILE 0400000 + +#define F_DUPFD 0 /* dup */ +#define F_GETFD 1 /* get close_on_exec */ +#define F_SETFD 2 /* set/clear close_on_exec */ +#define F_GETFL 3 /* get file->f_flags */ +#define F_SETFL 4 /* set file->f_flags */ +#define F_GETLK 5 +#define F_SETLK 6 +#define F_SETLKW 7 + +#define F_SETOWN 8 /* for sockets. */ +#define F_GETOWN 9 /* for sockets. */ +#define F_SETSIG 10 /* for sockets. */ +#define F_GETSIG 11 /* for sockets. */ + +#define F_GETLK64 12 /* using 'struct flock64' */ +#define F_SETLK64 13 +#define F_SETLKW64 14 + +/* for F_[GET|SET]FL */ +#define FD_CLOEXEC 1 /* actually anything with low bit set goes */ + +/* for posix fcntl() and lockf() */ +#define F_RDLCK 0 +#define F_WRLCK 1 +#define F_UNLCK 2 + +/* for old implementation of bsd flock () */ +#define F_EXLCK 4 /* or 3 */ +#define F_SHLCK 8 /* or 4 */ + +/* for leases */ +#define F_INPROGRESS 16 + +/* operations for bsd flock(), also used by the kernel implementation */ +#define LOCK_SH 1 /* shared lock */ +#define LOCK_EX 2 /* exclusive lock */ +#define LOCK_NB 4 /* or'd with one of the above to prevent + blocking */ +#define LOCK_UN 8 /* remove lock */ + +#define LOCK_MAND 32 /* This is a mandatory flock */ +#define LOCK_READ 64 /* ... Which allows concurrent read operations */ +#define LOCK_WRITE 128 /* ... Which allows concurrent write operations */ +#define LOCK_RW 192 /* ... Which allows concurrent read & write ops */ + +struct flock { + short l_type; + short l_whence; + off_t l_start; + off_t l_len; + pid_t l_pid; +}; + +struct flock64 { + short l_type; + short l_whence; + loff_t l_start; + loff_t l_len; + pid_t l_pid; +}; + +#define F_LINUX_SPECIFIC_BASE 1024 +#endif /* __V850_FCNTL_H__ */ diff --git a/include/asm-v850/fpga85e2c.h b/include/asm-v850/fpga85e2c.h new file mode 100644 index 000000000000..759d4999e3ba --- /dev/null +++ b/include/asm-v850/fpga85e2c.h @@ -0,0 +1,107 @@ +/* + * include/asm-v850/fpga85e2c.h -- Machine-dependent defs for + * FPGA implementation of V850E2/NA85E2C + * + * Copyright (C) 2002 NEC Corporation + * Copyright (C) 2002 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_FPGA85E2C_H__ +#define __V850_FPGA85E2C_H__ + + +#include <asm/clinkage.h> + + +#define CPU_ARCH "v850e2" +#define CPU_MODEL "FPGA NA85E2C/V850E2" + + +/* `external ram'. */ +#define ERAM_ADDR 0 +#define ERAM_SIZE 0x00100000 /* 1MB */ + + +/* FPGA specific control registers. */ + +/* Writing a non-zero value to FLGREG(0) will signal the controlling CPU + to stop execution. */ +#define FLGREG_ADDR(n) (0xFFE80100 + 2*(n)) +#define FLGREG(n) (*(volatile unsigned char *)FLGREG_ADDR (n)) +#define FLGREG_NUM 2 + +#define CSDEV_ADDR(n) (0xFFE80110 + 2*(n)) +#define CSDEV(n) (*(volatile unsigned char *)CSDEV_ADDR (n)) + +/* The BSC register controls bus-sizing. Each memory area CSn uses a pair + of bits N*2 and N*2+1, where 00 means an 8-bit bus size, 01 16-bit, and + 10 32-bit. */ +#define BSC_ADDR 0xFFFFF066 +#define BSC (*(volatile unsigned short *)BSC_ADDR) + +#define DWC_ADDR(n) (0xFFFFF484 + 2*(n)) +#define DWC(n) (*(volatile unsigned short *)DWC_ADDR (n)) + +#define ASC_ADDR 0xFFFFF48A +#define ASC (*(volatile unsigned short *)ASC_ADDR) + +#define BTSC_ADDR 0xFFFFF070 +#define BTSC (*(volatile unsigned short *)BTSC_ADDR) + +#define BHC_ADDR 0xFFFFF06A +#define BHC (*(volatile unsigned short *)BHC_ADDR) + + +/* NB85E-style interrupt system. */ +#include <asm/nb85e_intc.h> + +/* Timer interrupts 0-3, interrupt at intervals from CLK/4096 to CLK/16384. */ +#define IRQ_RPU(n) (60 + (n)) +#define IRQ_RPU_NUM 4 + +/* For <asm/irq.h> */ +#define NUM_CPU_IRQS 64 + + +/* General-purpose timer. */ +/* control/status register (can only be read/written via bit insns) */ +#define RPU_GTMC_ADDR 0xFFFFFB00 +#define RPU_GTMC (*(volatile unsigned char *)RPU_GTMC_ADDR) +#define RPU_GTMC_CE_BIT 7 /* clock enable (control) */ +#define RPU_GTMC_OV_BIT 6 /* overflow (status) */ +#define RPU_GTMC_CLK_BIT 1 /* 0 = .5 MHz CLK, 1 = 1 Mhz (control) */ +/* 32-bit count (8 least-significant bits are always zero). */ +#define RPU_GTM_ADDR 0xFFFFFB28 +#define RPU_GTM (*(volatile unsigned long *)RPU_GTMC_ADDR) + + +/* For <asm/page.h> */ +#define PAGE_OFFSET ERAM_ADDR /* minimum allocatable address */ + + +/* For <asm/entry.h> */ +/* `R0 RAM', used for a few miscellaneous variables that must be accessible + using a load instruction relative to R0. The FPGA implementation + actually has no on-chip RAM, so we use part of main ram just after the + interrupt vectors. */ +#ifdef __ASSEMBLY__ +#define R0_RAM_ADDR lo(C_SYMBOL_NAME(_r0_ram)) +#else +extern char _r0_ram; +#define R0_RAM_ADDR ((unsigned long)&_r0_ram); +#endif + + +/* For <asm/param.h> */ +#ifndef HZ +#define HZ 122 /* actually, 8.192ms ticks =~ 122.07 */ +#endif + + +#endif /* __V850_FPGA85E2C_H__ */ diff --git a/include/asm-v850/gbus_int.h b/include/asm-v850/gbus_int.h new file mode 100644 index 000000000000..75605916365c --- /dev/null +++ b/include/asm-v850/gbus_int.h @@ -0,0 +1,97 @@ +/* + * include/asm-v850/gbus_int.h -- Midas labs GBUS interrupt support + * + * Copyright (C) 2001,02 NEC Corporation + * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_GBUS_INT_H__ +#define __V850_GBUS_INT_H__ + + +/* The GBUS interrupt interface has 32 interrupts shared among 4 + processor interrupts. The 32 GBUS interrupts are divided into two + sets of 16 each, for allocating among control registers, etc (there + are two of each control register, with bits 0-15 controlling an + interrupt each). */ + +/* The GBUS interrupts themselves. */ +#define IRQ_GBUS_INT(n) (GBUS_INT_BASE_IRQ + (n)) +#define IRQ_GBUS_INT_NUM 32 + +/* Control registers. */ +#define GBUS_INT_STATUS_ADDR(w) (GBUS_INT_BASE_ADDR + (w)*0x40) +#define GBUS_INT_STATUS(w) (*(volatile u16 *)GBUS_INT_STATUS_ADDR(w)) +#define GBUS_INT_CLEAR_ADDR(w) (GBUS_INT_BASE_ADDR + 0x10 + (w)*0x40) +#define GBUS_INT_CLEAR(w) (*(volatile u16 *)GBUS_INT_CLEAR_ADDR(w)) +#define GBUS_INT_EDGE_ADDR(w) (GBUS_INT_BASE_ADDR + 0x20 + (w)*0x40) +#define GBUS_INT_EDGE(w) (*(volatile u16 *)GBUS_INT_EDGE_ADDR(w)) +#define GBUS_INT_POLARITY_ADDR(w) (GBUS_INT_BASE_ADDR + 0x30 + (w)*0x40) +#define GBUS_INT_POLARITY(w) (*(volatile u16 *)GBUS_INT_POLARITY_ADDR(w)) +/* This allows enabling interrupt bits in word W for interrupt GINTn. */ +#define GBUS_INT_ENABLE_ADDR(w, n) \ + (GBUS_INT_BASE_ADDR + 0x100 + (w)*0x10 + (n)*0x20) +#define GBUS_INT_ENABLE(w, n) (*(volatile u16 *)GBUS_INT_ENABLE_ADDR(w, n)) + +/* Mapping between kernel interrupt numbers and hardware control regs/bits. */ +#define GBUS_INT_BITS_PER_WORD 16 +#define GBUS_INT_NUM_WORDS (IRQ_GBUS_INT_NUM / GBUS_INT_BITS_PER_WORD) +#define GBUS_INT_IRQ_WORD(irq) (((irq) - GBUS_INT_BASE_IRQ) >> 4) +#define GBUS_INT_IRQ_BIT(irq) (((irq) - GBUS_INT_BASE_IRQ) & 0xF) +#define GBUS_INT_IRQ_MASK(irq) (1 << GBUS_INT_IRQ_BIT(irq)) + + +/* Possible priorities for GBUS interrupts. */ +#define GBUS_INT_PRIORITY_HIGH 2 +#define GBUS_INT_PRIORITY_MEDIUM 4 +#define GBUS_INT_PRIORITY_LOW 6 + + +#ifndef __ASSEMBLY__ + +/* Enable interrupt handling for interrupt IRQ. */ +extern void gbus_int_enable_irq (unsigned irq); +/* Disable interrupt handling for interrupt IRQ. Note that any + interrupts received while disabled will be delivered once the + interrupt is enabled again, unless they are explicitly cleared using + `gbus_int_clear_pending_irq'. */ +extern void gbus_int_disable_irq (unsigned irq); +/* Return true if interrupt handling for interrupt IRQ is enabled. */ +extern int gbus_int_irq_enabled (unsigned irq); +/* Disable all GBUS irqs. */ +extern int gbus_int_disable_irqs (void); +/* Clear any pending interrupts for IRQ. */ +extern void gbus_int_clear_pending_irq (unsigned irq); +/* Return true if interrupt IRQ is pending (but disabled). */ +extern int gbus_int_irq_pending (unsigned irq); + + +struct gbus_int_irq_init { + const char *name; /* name of interrupt type */ + + /* Range of kernel irq numbers for this type: + BASE, BASE+INTERVAL, ..., BASE+INTERVAL*NUM */ + unsigned base, num, interval; + + unsigned priority; /* interrupt priority to assign */ +}; +struct hw_interrupt_type; /* fwd decl */ + +/* Initialize HW_IRQ_TYPES for GBUS irqs described in array + INITS (which is terminated by an entry with the name field == 0). */ +extern void gbus_int_init_irq_types (struct gbus_int_irq_init *inits, + struct hw_interrupt_type *hw_irq_types); + +/* Initialize GBUS interrupts. */ +extern void gbus_int_init_irqs (void); + +#endif /* !__ASSEMBLY__ */ + + +#endif /* __V850_GBUS_INT_H__ */ diff --git a/include/asm-v850/hardirq.h b/include/asm-v850/hardirq.h new file mode 100644 index 000000000000..cfe4febe8fd7 --- /dev/null +++ b/include/asm-v850/hardirq.h @@ -0,0 +1,96 @@ +#ifndef __V850_HARDIRQ_H__ +#define __V850_HARDIRQ_H__ + +#include <linux/config.h> +#include <linux/threads.h> + +typedef struct { + unsigned int __softirq_pending; + unsigned int __syscall_count; + struct task_struct * __ksoftirqd_task; +} ____cacheline_aligned irq_cpustat_t; + +#include <linux/irq_cpustat.h> /* Standard mappings for irq_cpustat_t above */ + +/* + * We put the hardirq and softirq counter into the preemption + * counter. The bitmask has the following meaning: + * + * - bits 0-7 are the preemption count (max preemption depth: 256) + * - bits 8-15 are the softirq count (max # of softirqs: 256) + * - bits 16-23 are the hardirq count (max # of hardirqs: 256) + * + * - ( bit 26 is the PREEMPT_ACTIVE flag. ) + * + * PREEMPT_MASK: 0x000000ff + * HARDIRQ_MASK: 0x0000ff00 + * SOFTIRQ_MASK: 0x00ff0000 + */ + +#define PREEMPT_BITS 8 +#define SOFTIRQ_BITS 8 +#define HARDIRQ_BITS 8 + +#define PREEMPT_SHIFT 0 +#define SOFTIRQ_SHIFT (PREEMPT_SHIFT + PREEMPT_BITS) +#define HARDIRQ_SHIFT (SOFTIRQ_SHIFT + SOFTIRQ_BITS) + +#define __MASK(x) ((1UL << (x))-1) + +#define PREEMPT_MASK (__MASK(PREEMPT_BITS) << PREEMPT_SHIFT) +#define HARDIRQ_MASK (__MASK(HARDIRQ_BITS) << HARDIRQ_SHIFT) +#define SOFTIRQ_MASK (__MASK(SOFTIRQ_BITS) << SOFTIRQ_SHIFT) + +#define hardirq_count() (preempt_count() & HARDIRQ_MASK) +#define softirq_count() (preempt_count() & SOFTIRQ_MASK) +#define irq_count() (preempt_count() & (HARDIRQ_MASK | SOFTIRQ_MASK)) + +#define PREEMPT_OFFSET (1UL << PREEMPT_SHIFT) +#define SOFTIRQ_OFFSET (1UL << SOFTIRQ_SHIFT) +#define HARDIRQ_OFFSET (1UL << HARDIRQ_SHIFT) + +/* + * The hardirq mask has to be large enough to have + * space for potentially all IRQ sources in the system + * nesting on a single CPU: + */ +#if (1 << HARDIRQ_BITS) < NR_IRQS +# error HARDIRQ_BITS is too low! +#endif + +/* + * Are we doing bottom half or hardware interrupt processing? + * Are we in a softirq context? Interrupt context? + */ +#define in_irq() (hardirq_count()) +#define in_softirq() (softirq_count()) +#define in_interrupt() (irq_count()) + +#define hardirq_trylock() (!in_interrupt()) +#define hardirq_endlock() do { } while (0) + +#define irq_enter() (preempt_count() += HARDIRQ_OFFSET) + +#if CONFIG_PREEMPT +# define in_atomic() (preempt_count() != kernel_locked()) +# define IRQ_EXIT_OFFSET (HARDIRQ_OFFSET-1) +#else +# define in_atomic() (preempt_count() != 0) +# define IRQ_EXIT_OFFSET HARDIRQ_OFFSET +#endif + +#define irq_exit() \ +do { \ + preempt_count() -= IRQ_EXIT_OFFSET; \ + if (!in_interrupt() && softirq_pending(smp_processor_id())) \ + do_softirq(); \ + preempt_enable_no_resched(); \ +} while (0) + +#ifndef CONFIG_SMP +# define synchronize_irq(irq) barrier() +#else +# error v850nommu SMP is not available +#endif /* CONFIG_SMP */ + +#endif /* __V850_HARDIRQ_H__ */ diff --git a/include/asm-v850/highres_timer.h b/include/asm-v850/highres_timer.h new file mode 100644 index 000000000000..c63b8cd1bff4 --- /dev/null +++ b/include/asm-v850/highres_timer.h @@ -0,0 +1,44 @@ +/* + * include/asm-v850/highres_timer.h -- High resolution timing routines + * + * Copyright (C) 2001 NEC Corporation + * Copyright (C) 2001 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_HIGHRES_TIMER_H__ +#define __V850_HIGHRES_TIMER_H__ + +#ifndef __ASSEMBLY__ +#include <linux/time.h> +#endif + +#include <asm/entry.h> + + +/* Frequency of the `slow ticks' (one tick each time the fast-tick + counter overflows). */ +#define HIGHRES_TIMER_SLOW_TICK_RATE 25 + +/* Which timer in the nb85e `Timer D' we use. */ +#define HIGHRES_TIMER_TIMER_D_UNIT 3 + + +#ifndef __ASSEMBLY__ + +extern void highres_timer_start (void), highres_timer_stop (void); +extern void highres_timer_reset (void); +extern void highres_timer_read_ticks (u32 *slow_ticks, u32 *fast_ticks); +extern void highres_timer_ticks_to_timeval (u32 slow_ticks, u32 fast_ticks, + struct timeval *tv); +extern void highres_timer_read (struct timeval *tv); + +#endif /* !__ASSEMBLY__ */ + + +#endif /* __V850_HIGHRES_TIMER_H__ */ diff --git a/include/asm-v850/hw_irq.h b/include/asm-v850/hw_irq.h new file mode 100644 index 000000000000..4bdc98edb9f8 --- /dev/null +++ b/include/asm-v850/hw_irq.h @@ -0,0 +1,8 @@ +#ifndef __V850_HW_IRQ_H__ +#define __V850_HW_IRQ_H__ + +extern inline void hw_resend_irq (struct hw_interrupt_type *h, unsigned int i) +{ +} + +#endif /* __V850_HW_IRQ_H__ */ diff --git a/include/asm-v850/io.h b/include/asm-v850/io.h new file mode 100644 index 000000000000..fb37d2fb69d4 --- /dev/null +++ b/include/asm-v850/io.h @@ -0,0 +1,106 @@ +/* + * include/asm-v850/io.h -- Misc I/O operations + * + * Copyright (C) 2001,02 NEC Corporation + * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_IO_H__ +#define __V850_IO_H__ + +#define IO_SPACE_LIMIT 0xFFFFFFFF + +#define readb(addr) \ + ({ unsigned char __v = (*(volatile unsigned char *) (addr)); __v; }) +#define readw(addr) \ + ({ unsigned short __v = (*(volatile unsigned short *) (addr)); __v; }) +#define readl(addr) \ + ({ unsigned long __v = (*(volatile unsigned long *) (addr)); __v; }) + +#define writeb(b, addr) \ + (void)((*(volatile unsigned char *) (addr)) = (b)) +#define writew(b, addr) \ + (void)((*(volatile unsigned short *) (addr)) = (b)) +#define writel(b, addr) \ + (void)((*(volatile unsigned int *) (addr)) = (b)) + +#define inb(addr) readb (addr) +#define inw(addr) readw (addr) +#define inl(addr) readl (addr) +#define outb(x, addr) ((void) writeb (x, addr)) +#define outw(x, addr) ((void) writew (x, addr)) +#define outl(x, addr) ((void) writel (x, addr)) + +#define inb_p(port) inb((port)) +#define outb_p(val, port) outb((val), (port)) +#define inw_p(port) inw((port)) +#define outw_p(val, port) outw((val), (port)) +#define inl_p(port) inl((port)) +#define outl_p(val, port) outl((val), (port)) + +static inline void insb (unsigned long port, void *dst, unsigned long count) +{ + unsigned char *p = dst; + while (count--) + *p++ = inb (port); +} +static inline void insw (unsigned long port, void *dst, unsigned long count) +{ + unsigned short *p = dst; + while (count--) + *p++ = inw (port); +} +static inline void insl (unsigned long port, void *dst, unsigned long count) +{ + unsigned long *p = dst; + while (count--) + *p++ = inl (port); +} + +static inline void +outsb (unsigned long port, const void *src, unsigned long count) +{ + const unsigned char *p = src; + while (count--) + outb (*p++, port); +} +static inline void +outsw (unsigned long port, const void *src, unsigned long count) +{ + const unsigned short *p = src; + while (count--) + outw (*p++, port); +} +static inline void +outsl (unsigned long port, const void *src, unsigned long count) +{ + const unsigned long *p = src; + while (count--) + outl (*p++, port); +} + +#define iounmap(addr) ((void)0) +#define ioremap(physaddr, size) (physaddr) +#define ioremap_nocache(physaddr, size) (physaddr) +#define ioremap_writethrough(physaddr, size) (physaddr) +#define ioremap_fullcache(physaddr, size) (physaddr) + +#define page_to_phys(page) ((page - mem_map) << PAGE_SHIFT) +#if 0 +/* This is really stupid; don't define it. */ +#define page_to_bus(page) page_to_phys (page) +#endif + +/* Conversion between virtual and physical mappings. */ +#define mm_ptov(addr) ((void *)__phys_to_virt (addr)) +#define mm_vtop(addr) ((unsigned long)__virt_to_phys (addr)) +#define phys_to_virt(addr) ((void *)__phys_to_virt (addr)) +#define virt_to_phys(addr) ((unsigned long)__virt_to_phys (addr)) + +#endif /* __V850_IO_H__ */ diff --git a/include/asm-v850/ioctl.h b/include/asm-v850/ioctl.h new file mode 100644 index 000000000000..1765df6c7b87 --- /dev/null +++ b/include/asm-v850/ioctl.h @@ -0,0 +1,80 @@ +/* $Id: ioctl.h,v 1.1 2002/09/28 14:58:41 gerg Exp $ + * + * linux/ioctl.h for Linux by H.H. Bergman. + */ + +#ifndef _V850_IOCTL_H +#define _V850_IOCTL_H + +/* ioctl command encoding: 32 bits total, command in lower 16 bits, + * size of the parameter structure in the lower 14 bits of the + * upper 16 bits. + * Encoding the size of the parameter structure in the ioctl request + * is useful for catching programs compiled with old versions + * and to avoid overwriting user space outside the user buffer area. + * The highest 2 bits are reserved for indicating the ``access mode''. + * NOTE: This limits the max parameter size to 16kB -1 ! + */ + +/* + * I don't really have any idea about what this should look like, so + * for the time being, this is heavily based on the PC definitions. + */ + +/* + * The following is for compatibility across the various Linux + * platforms. The i386 ioctl numbering scheme doesn't really enforce + * a type field. De facto, however, the top 8 bits of the lower 16 + * bits are indeed used as a type field, so we might just as well make + * this explicit here. Please be sure to use the decoding macros + * below from now on. + */ +#define _IOC_NRBITS 8 +#define _IOC_TYPEBITS 8 +#define _IOC_SIZEBITS 14 +#define _IOC_DIRBITS 2 + +#define _IOC_NRMASK ((1 << _IOC_NRBITS)-1) +#define _IOC_TYPEMASK ((1 << _IOC_TYPEBITS)-1) +#define _IOC_SIZEMASK ((1 << _IOC_SIZEBITS)-1) +#define _IOC_DIRMASK ((1 << _IOC_DIRBITS)-1) + +#define _IOC_NRSHIFT 0 +#define _IOC_TYPESHIFT (_IOC_NRSHIFT+_IOC_NRBITS) +#define _IOC_SIZESHIFT (_IOC_TYPESHIFT+_IOC_TYPEBITS) +#define _IOC_DIRSHIFT (_IOC_SIZESHIFT+_IOC_SIZEBITS) + +/* + * Direction bits. + */ +#define _IOC_NONE 0U +#define _IOC_WRITE 1U +#define _IOC_READ 2U + +#define _IOC(dir,type,nr,size) \ + (((dir) << _IOC_DIRSHIFT) | \ + ((type) << _IOC_TYPESHIFT) | \ + ((nr) << _IOC_NRSHIFT) | \ + ((size) << _IOC_SIZESHIFT)) + +/* used to create numbers */ +#define _IO(type,nr) _IOC(_IOC_NONE,(type),(nr),0) +#define _IOR(type,nr,size) _IOC(_IOC_READ,(type),(nr),sizeof(size)) +#define _IOW(type,nr,size) _IOC(_IOC_WRITE,(type),(nr),sizeof(size)) +#define _IOWR(type,nr,size) _IOC(_IOC_READ|_IOC_WRITE,(type),(nr),sizeof(size)) + +/* used to decode ioctl numbers.. */ +#define _IOC_DIR(nr) (((nr) >> _IOC_DIRSHIFT) & _IOC_DIRMASK) +#define _IOC_TYPE(nr) (((nr) >> _IOC_TYPESHIFT) & _IOC_TYPEMASK) +#define _IOC_NR(nr) (((nr) >> _IOC_NRSHIFT) & _IOC_NRMASK) +#define _IOC_SIZE(nr) (((nr) >> _IOC_SIZESHIFT) & _IOC_SIZEMASK) + +/* ...and for the drivers/sound files... */ + +#define IOC_IN (_IOC_WRITE << _IOC_DIRSHIFT) +#define IOC_OUT (_IOC_READ << _IOC_DIRSHIFT) +#define IOC_INOUT ((_IOC_WRITE|_IOC_READ) << _IOC_DIRSHIFT) +#define IOCSIZE_MASK (_IOC_SIZEMASK << _IOC_SIZESHIFT) +#define IOCSIZE_SHIFT (_IOC_SIZESHIFT) + +#endif /* __V850_IOCTL_H__ */ diff --git a/include/asm-v850/ioctls.h b/include/asm-v850/ioctls.h new file mode 100644 index 000000000000..a765e0a3de7f --- /dev/null +++ b/include/asm-v850/ioctls.h @@ -0,0 +1,81 @@ +#ifndef __V850_IOCTLS_H__ +#define __V850_IOCTLS_H__ + +#include <asm/ioctl.h> + +/* 0x54 is just a magic number to make these relatively unique ('T') */ + +#define TCGETS 0x5401 +#define TCSETS 0x5402 +#define TCSETSW 0x5403 +#define TCSETSF 0x5404 +#define TCGETA 0x5405 +#define TCSETA 0x5406 +#define TCSETAW 0x5407 +#define TCSETAF 0x5408 +#define TCSBRK 0x5409 +#define TCXONC 0x540A +#define TCFLSH 0x540B +#define TIOCEXCL 0x540C +#define TIOCNXCL 0x540D +#define TIOCSCTTY 0x540E +#define TIOCGPGRP 0x540F +#define TIOCSPGRP 0x5410 +#define TIOCOUTQ 0x5411 +#define TIOCSTI 0x5412 +#define TIOCGWINSZ 0x5413 +#define TIOCSWINSZ 0x5414 +#define TIOCMGET 0x5415 +#define TIOCMBIS 0x5416 +#define TIOCMBIC 0x5417 +#define TIOCMSET 0x5418 +#define TIOCGSOFTCAR 0x5419 +#define TIOCSSOFTCAR 0x541A +#define FIONREAD 0x541B +#define TIOCINQ FIONREAD +#define TIOCLINUX 0x541C +#define TIOCCONS 0x541D +#define TIOCGSERIAL 0x541E +#define TIOCSSERIAL 0x541F +#define TIOCPKT 0x5420 +#define FIONBIO 0x5421 +#define TIOCNOTTY 0x5422 +#define TIOCSETD 0x5423 +#define TIOCGETD 0x5424 +#define TCSBRKP 0x5425 /* Needed for POSIX tcsendbreak() */ +#define TIOCTTYGSTRUCT 0x5426 /* For debugging only */ +#define TIOCSBRK 0x5427 /* BSD compatibility */ +#define TIOCCBRK 0x5428 /* BSD compatibility */ +#define TIOCGSID 0x5429 /* Return the session ID of FD */ +#define TIOCGPTN _IOR('T',0x30, unsigned int) /* Get Pty Number (of pty-mux device) */ +#define TIOCSPTLCK _IOW('T',0x31, int) /* Lock/unlock Pty */ + +#define FIONCLEX 0x5450 /* these numbers need to be adjusted. */ +#define FIOCLEX 0x5451 +#define FIOASYNC 0x5452 +#define TIOCSERCONFIG 0x5453 +#define TIOCSERGWILD 0x5454 +#define TIOCSERSWILD 0x5455 +#define TIOCGLCKTRMIOS 0x5456 +#define TIOCSLCKTRMIOS 0x5457 +#define TIOCSERGSTRUCT 0x5458 /* For debugging only */ +#define TIOCSERGETLSR 0x5459 /* Get line status register */ +#define TIOCSERGETMULTI 0x545A /* Get multiport config */ +#define TIOCSERSETMULTI 0x545B /* Set multiport config */ + +#define TIOCMIWAIT 0x545C /* wait for a change on serial input line(s) */ +#define TIOCGICOUNT 0x545D /* read serial port inline interrupt counts */ +#define FIOQSIZE 0x545E + +/* Used for packet mode */ +#define TIOCPKT_DATA 0 +#define TIOCPKT_FLUSHREAD 1 +#define TIOCPKT_FLUSHWRITE 2 +#define TIOCPKT_STOP 4 +#define TIOCPKT_START 8 +#define TIOCPKT_NOSTOP 16 +#define TIOCPKT_DOSTOP 32 + +#define TIOCSER_TEMT 0x01 /* Transmitter physically empty */ + +#endif /* __V850_IOCTLS_H__ */ diff --git a/include/asm-v850/ipc.h b/include/asm-v850/ipc.h new file mode 100644 index 000000000000..5656799cd4e8 --- /dev/null +++ b/include/asm-v850/ipc.h @@ -0,0 +1,31 @@ +#ifndef __V850_IPC_H__ +#define __V850_IPC_H__ + +/* + * These are used to wrap system calls on v850. + * + * See arch/v850/kernel/syscalls.c for ugly details.. + */ +struct ipc_kludge { + struct msgbuf *msgp; + long msgtyp; +}; + +#define SEMOP 1 +#define SEMGET 2 +#define SEMCTL 3 +#define MSGSND 11 +#define MSGRCV 12 +#define MSGGET 13 +#define MSGCTL 14 +#define SHMAT 21 +#define SHMDT 22 +#define SHMGET 23 +#define SHMCTL 24 + +/* Used by the DIPC package, try and avoid reusing it */ +#define DIPC 25 + +#define IPCCALL(version,op) ((version)<<16 | (op)) + +#endif /* __V850_IPC_H__ */ diff --git a/include/asm-v850/ipcbuf.h b/include/asm-v850/ipcbuf.h new file mode 100644 index 000000000000..d8cbe9886d95 --- /dev/null +++ b/include/asm-v850/ipcbuf.h @@ -0,0 +1,29 @@ +#ifndef __V850E_IPCBUF_H__ +#define __V850E_IPCBUF_H__ + +/* + * The user_ipc_perm structure for v850e architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 32-bit mode_t and seq + * - 2 miscellaneous 32-bit values + */ + +struct ipc64_perm +{ + __kernel_key_t key; + __kernel_uid32_t uid; + __kernel_gid32_t gid; + __kernel_uid32_t cuid; + __kernel_gid32_t cgid; + __kernel_mode_t mode; + unsigned short __pad1; + unsigned short seq; + unsigned short __pad2; + unsigned long __unused1; + unsigned long __unused2; +}; + +#endif /* __V850E_IPCBUF_H__ */ diff --git a/include/asm-v850/irq.h b/include/asm-v850/irq.h new file mode 100644 index 000000000000..02a2c7906d70 --- /dev/null +++ b/include/asm-v850/irq.h @@ -0,0 +1,57 @@ +/* + * include/asm-v850/irq.h -- Machine interrupt handling + * + * Copyright (C) 2001,02 NEC Corporation + * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_IRQ_H__ +#define __V850_IRQ_H__ + +#include <asm/machdep.h> + +/* Default NUM_MACH_IRQS. */ +#ifndef NUM_MACH_IRQS +#define NUM_MACH_IRQS NUM_CPU_IRQS +#endif + +/* NMIs have IRQ numbers from FIRST_NMI to FIRST_NMI+NUM_NMIS-1. */ +#define FIRST_NMI NUM_MACH_IRQS +#define IRQ_NMI(n) (FIRST_NMI + (n)) +/* v850 processors have 3 non-maskable interrupts. */ +#define NUM_NMIS 3 + +/* Includes both maskable and non-maskable irqs. */ +#define NR_IRQS (NUM_MACH_IRQS + NUM_NMIS) + + +#ifndef __ASSEMBLY__ + +struct pt_regs; +struct hw_interrupt_type; +struct irqaction; + +#define irq_cannonicalize(irq) (irq) + +/* Initialize irq handling for IRQs. + BASE_IRQ, BASE_IRQ+INTERVAL, ..., BASE_IRQ+NUM*INTERVAL + to IRQ_TYPE. An IRQ_TYPE of 0 means to use a generic interrupt type. */ +extern void +init_irq_handlers (int base_irq, int num, int interval, + struct hw_interrupt_type *irq_type); + +typedef void (*irq_handler_t)(int irq, void *data, struct pt_regs *regs); + +/* Handle interrupt IRQ. REGS are the registers at the time of ther + interrupt. */ +extern unsigned int handle_irq (int irq, struct pt_regs *regs); + +#endif /* !__ASSEMBLY__ */ + +#endif /* __V850_IRQ_H__ */ diff --git a/include/asm-v850/kmap_types.h b/include/asm-v850/kmap_types.h new file mode 100644 index 000000000000..3288976b161f --- /dev/null +++ b/include/asm-v850/kmap_types.h @@ -0,0 +1,19 @@ +#ifndef __V850_KMAP_TYPES_H__ +#define __V850_KMAP_TYPES_H__ + +enum km_type { + KM_BOUNCE_READ, + KM_SKB_SUNRPC_DATA, + KM_SKB_DATA_SOFTIRQ, + KM_USER0, + KM_USER1, + KM_BIO_SRC_IRQ, + KM_BIO_DST_IRQ, + KM_PTE0, + KM_PTE1, + KM_IRQ0, + KM_IRQ1, + KM_TYPE_NR +}; + +#endif /* __V850_KMAP_TYPES_H__ */ diff --git a/include/asm-v850/linkage.h b/include/asm-v850/linkage.h new file mode 100644 index 000000000000..291c2d01c44f --- /dev/null +++ b/include/asm-v850/linkage.h @@ -0,0 +1,6 @@ +#ifndef __ASM_LINKAGE_H +#define __ASM_LINKAGE_H + +/* Nothing to see here... */ + +#endif diff --git a/include/asm-v850/ma.h b/include/asm-v850/ma.h new file mode 100644 index 000000000000..ed153b642360 --- /dev/null +++ b/include/asm-v850/ma.h @@ -0,0 +1,102 @@ +/* + * include/asm-v850/ma.h -- V850E/MA series of cpu chips + * + * Copyright (C) 2001,02 NEC Corporation + * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_MA_H__ +#define __V850_MA_H__ + + +/* The MA series uses the NB85E cpu core. */ +#include <asm/nb85e.h> + + +/* For <asm/entry.h> */ +/* We use on-chip RAM, for a few miscellaneous variables that must be + accessible using a load instruction relative to R0. The amount + varies between chip models, but there's always at least 4K, and it + should always start at FFFFC000. */ +#define R0_RAM_ADDR 0xFFFFC000 + + +/* MA series UART details. */ +#define NB85E_UART_BASE_FREQ CPU_CLOCK_FREQ + +/* This is a function that gets called before configuring the UART. */ +#define NB85E_UART_PRE_CONFIGURE ma_uart_pre_configure +#ifndef __ASSEMBLY__ +extern void ma_uart_pre_configure (unsigned chan, + unsigned cflags, unsigned baud); +#endif + + +/* MA series timer C details. */ +#define NB85E_TIMER_C_BASE_ADDR 0xFFFFF600 + + +/* MA series timer D details. */ +#define NB85E_TIMER_D_BASE_ADDR 0xFFFFF540 +#define NB85E_TIMER_D_TMD_BASE_ADDR (NB85E_TIMER_D_BASE_ADDR + 0x0) +#define NB85E_TIMER_D_CMD_BASE_ADDR (NB85E_TIMER_D_BASE_ADDR + 0x2) +#define NB85E_TIMER_D_TMCD_BASE_ADDR (NB85E_TIMER_D_BASE_ADDR + 0x4) + +#define NB85E_TIMER_D_BASE_FREQ CPU_CLOCK_FREQ + + +/* Port 0 */ +/* Direct I/O. Bits 0-7 are pins P00-P07. */ +#define MA_PORT0_IO_ADDR 0xFFFFF400 +#define MA_PORT0_IO (*(volatile u8 *)MA_PORT0_IO_ADDR) +/* Port mode (for direct I/O, 0 = output, 1 = input). */ +#define MA_PORT0_PM_ADDR 0xFFFFF420 +#define MA_PORT0_PM (*(volatile u8 *)MA_PORT0_PM_ADDR) +/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode). */ +#define MA_PORT0_PMC_ADDR 0xFFFFF440 +#define MA_PORT0_PMC (*(volatile u8 *)MA_PORT0_PMC_ADDR) +/* Port function control (for P04-P07, 0 = IRQ, 1 = DMARQ). */ +#define MA_PORT0_PFC_ADDR 0xFFFFF460 +#define MA_PORT0_PFC (*(volatile u8 *)MA_PORT0_PFC_ADDR) + +/* Port 1 */ +/* Direct I/O. Bits 0-3 are pins P10-P13. */ +#define MA_PORT1_IO_ADDR 0xFFFFF402 +#define MA_PORT1_IO (*(volatile u8 *)MA_PORT1_IO_ADDR) +/* Port mode (for direct I/O, 0 = output, 1 = input). */ +#define MA_PORT1_PM_ADDR 0xFFFFF420 +#define MA_PORT1_PM (*(volatile u8 *)MA_PORT1_PM_ADDR) +/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode). */ +#define MA_PORT1_PMC_ADDR 0xFFFFF442 +#define MA_PORT1_PMC (*(volatile u8 *)MA_PORT1_PMC_ADDR) + +/* Port 4 */ +/* Direct I/O. Bits 0-5 are pins P40-P45. */ +#define MA_PORT4_IO_ADDR 0xFFFFF408 +#define MA_PORT4_IO (*(volatile u8 *)MA_PORT4_IO_ADDR) +/* Port mode (for direct I/O, 0 = output, 1 = input). */ +#define MA_PORT4_PM_ADDR 0xFFFFF428 +#define MA_PORT4_PM (*(volatile u8 *)MA_PORT4_PM_ADDR) +/* Port mode control (0 = direct I/O mode, 1 = alternative I/O mode). */ +#define MA_PORT4_PMC_ADDR 0xFFFFF448 +#define MA_PORT4_PMC (*(volatile u8 *)MA_PORT4_PMC_ADDR) +/* Port function control (for serial interfaces, 0 = CSI, 1 = UART). */ +#define MA_PORT4_PFC_ADDR 0xFFFFF468 +#define MA_PORT4_PFC (*(volatile u8 *)MA_PORT4_PFC_ADDR) + + +#ifndef __ASSEMBLY__ + +/* Initialize MA chip interrupts. */ +extern void ma_init_irqs (void); + +#endif /* !__ASSEMBLY__ */ + + +#endif /* __V850_MA_H__ */ diff --git a/include/asm-v850/ma1.h b/include/asm-v850/ma1.h new file mode 100644 index 000000000000..034eea17a02f --- /dev/null +++ b/include/asm-v850/ma1.h @@ -0,0 +1,51 @@ +/* + * include/asm-v850/ma1.h -- V850E/MA1 cpu chip + * + * Copyright (C) 2001,02 NEC Corporation + * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_MA1_H__ +#define __V850_MA1_H__ + +/* Inherit more generic details from MA series. */ +#include <asm/ma.h> + + +#define CPU_MODEL "v850e/ma1" +#define CPU_MODEL_LONG "NEC V850E/MA1" + + +/* Hardware-specific interrupt numbers (in the kernel IRQ namespace). */ +#define IRQ_INTOV(n) (n) /* 0-3 */ +#define IRQ_INTOV_NUM 4 +#define IRQ_INTP(n) (0x4 + (n)) /* Pnnn (pin) interrupts */ +#define IRQ_INTP_NUM 24 +#define IRQ_INTCMD(n) (0x1c + (n)) /* interval timer interrupts 0-3 */ +#define IRQ_INTCMD_NUM 4 +#define IRQ_INTDMA(n) (0x20 + (n)) /* DMA interrupts 0-3 */ +#define IRQ_INTDMA_NUM 4 +#define IRQ_INTCSI(n) (0x24 + (n)*4)/* CSI 0-2 transmit/receive completion */ +#define IRQ_INTCSI_NUM 3 +#define IRQ_INTSER(n) (0x25 + (n)*4) /* UART 0-2 reception error */ +#define IRQ_INTSER_NUM 3 +#define IRQ_INTSR(n) (0x26 + (n)*4) /* UART 0-2 reception completion */ +#define IRQ_INTSR_NUM 3 +#define IRQ_INTST(n) (0x27 + (n)*4) /* UART 0-2 transmission completion */ +#define IRQ_INTST_NUM 3 + +/* For <asm/irq.h> */ +#define NUM_CPU_IRQS 0x30 + + +/* The MA1 has a UART with 3 channels. */ +#define NB85E_UART_NUM_CHANNELS 3 + + +#endif /* __V850_MA1_H__ */ diff --git a/include/asm-v850/machdep.h b/include/asm-v850/machdep.h new file mode 100644 index 000000000000..a8e82e3f6093 --- /dev/null +++ b/include/asm-v850/machdep.h @@ -0,0 +1,49 @@ +/* + * include/asm-v850/machdep.h -- Machine-dependent definitions + * + * Copyright (C) 2001,02 NEC Corporation + * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_MACHDEP_H__ +#define __V850_MACHDEP_H__ + +#include <linux/config.h> + +/* chips */ +#ifdef CONFIG_V850E_MA1 +#include <asm/ma1.h> +#endif +#ifdef CONFIG_V850E_TEG +#include <asm/teg.h> +#endif + +/* Anna is both a chip _and_ a platform, so put it in the middle... */ +#ifdef CONFIG_V850E2_ANNA +#include <asm/anna.h> +#endif + +/* platforms */ +#ifdef CONFIG_RTE_CB_MA1 +#include <asm/rte_ma1_cb.h> +#endif +#ifdef CONFIG_RTE_CB_NB85E +#include <asm/rte_nb85e_cb.h> +#endif +#ifdef CONFIG_V850E_SIM +#include <asm/sim.h> +#endif +#ifdef CONFIG_V850E2_SIM85E2C +#include <asm/sim85e2c.h> +#endif +#ifdef CONFIG_V850E2_FPGA85E2C +#include <asm/fpga85e2c.h> +#endif + +#endif /* __V850_MACHDEP_H__ */ diff --git a/include/asm-v850/macrology.h b/include/asm-v850/macrology.h new file mode 100644 index 000000000000..37abf874832c --- /dev/null +++ b/include/asm-v850/macrology.h @@ -0,0 +1,17 @@ +/* + * include/asm-v850/macrology.h -- Various useful CPP macros + * + * Copyright (C) 2001 NEC Corporation + * Copyright (C) 2001 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#define macrology_paste(arg1, arg2) macrology_paste_1(arg1, arg2) +#define macrology_paste_1(arg1, arg2) arg1 ## arg2 +#define macrology_stringify(sym) macrology_stringify_1(sym) +#define macrology_stringify_1(sym) #sym diff --git a/include/asm-v850/mman.h b/include/asm-v850/mman.h new file mode 100644 index 000000000000..441b8716dbf4 --- /dev/null +++ b/include/asm-v850/mman.h @@ -0,0 +1,38 @@ +#ifndef __V850_MMAN_H__ +#define __V850_MMAN_H__ + +#define PROT_READ 0x1 /* page can be read */ +#define PROT_WRITE 0x2 /* page can be written */ +#define PROT_EXEC 0x4 /* page can be executed */ +#define PROT_NONE 0x0 /* page can not be accessed */ + +#define MAP_SHARED 0x01 /* Share changes */ +#define MAP_PRIVATE 0x02 /* Changes are private */ +#define MAP_TYPE 0x0f /* Mask for type of mapping */ +#define MAP_FIXED 0x10 /* Interpret addr exactly */ +#define MAP_ANONYMOUS 0x20 /* don't use a file */ + +#define MAP_GROWSDOWN 0x0100 /* stack-like segment */ +#define MAP_DENYWRITE 0x0800 /* ETXTBSY */ +#define MAP_EXECUTABLE 0x1000 /* mark it as an executable */ +#define MAP_LOCKED 0x2000 /* pages are locked */ +#define MAP_NORESERVE 0x4000 /* don't check for reservations */ + +#define MS_ASYNC 1 /* sync memory asynchronously */ +#define MS_INVALIDATE 2 /* invalidate the caches */ +#define MS_SYNC 4 /* synchronous memory sync */ + +#define MCL_CURRENT 1 /* lock all current mappings */ +#define MCL_FUTURE 2 /* lock all future mappings */ + +#define MADV_NORMAL 0x0 /* default page-in behavior */ +#define MADV_RANDOM 0x1 /* page-in minimum required */ +#define MADV_SEQUENTIAL 0x2 /* read-ahead aggressively */ +#define MADV_WILLNEED 0x3 /* pre-fault pages */ +#define MADV_DONTNEED 0x4 /* discard these pages */ + +/* compatibility flags */ +#define MAP_ANON MAP_ANONYMOUS +#define MAP_FILE 0 + +#endif /* __V850_MMAN_H__ */ diff --git a/include/asm-v850/mmu.h b/include/asm-v850/mmu.h new file mode 100644 index 000000000000..e30a52becfd6 --- /dev/null +++ b/include/asm-v850/mmu.h @@ -0,0 +1,22 @@ +/* Copyright (C) 2002, David McCullough <davidm@snapgear.com> */ + +#ifndef __V850_MMU_H__ +#define __V850_MMU_H__ + +struct mm_rblock_struct { + int size; + int refcount; + void *kblock; +}; + +struct mm_tblock_struct { + struct mm_rblock_struct *rblock; + struct mm_tblock_struct *next; +}; + +typedef struct { + struct mm_tblock_struct tblock; + unsigned long end_brk; +} mm_context_t; + +#endif /* __V850_MMU_H__ */ diff --git a/include/asm-v850/mmu_context.h b/include/asm-v850/mmu_context.h new file mode 100644 index 000000000000..cfc839054a4d --- /dev/null +++ b/include/asm-v850/mmu_context.h @@ -0,0 +1,12 @@ +#ifndef __V850_MMU_CONTEXT_H__ +#define __V850_MMU_CONTEXT_H__ + +#include <linux/sched.h> + +#define destroy_context(mm) ((void)0) +#define init_new_context(tsk,mm) 0 +#define switch_mm(prev,next,tsk,cpu) ((void)0) +#define activate_mm(prev,next) ((void)0) +#define enter_lazy_tlb(mm,tsk,cpu) ((void)0) + +#endif /* __V850_MMU_CONTEXT_H__ */ diff --git a/include/asm-v850/module.h b/include/asm-v850/module.h new file mode 100644 index 000000000000..485c89fddc10 --- /dev/null +++ b/include/asm-v850/module.h @@ -0,0 +1,22 @@ +/* + * include/asm-v850/module.h -- Architecture-specific module hooks + * + * Copyright (C) 2001,02 NEC Corporation + * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_MODULE_H__ +#define __V850_MODULE_H__ + +#define arch_init_modules(x) ((void)0) +#define module_arch_init(x) (0) +#define module_map(sz) vmalloc (sz) +#define module_unmap(sz) vfree (sz) + +#endif /* __V850_MODULE_H__ */ diff --git a/include/asm-v850/msgbuf.h b/include/asm-v850/msgbuf.h new file mode 100644 index 000000000000..ed07dbd01637 --- /dev/null +++ b/include/asm-v850/msgbuf.h @@ -0,0 +1,31 @@ +#ifndef __V850_MSGBUF_H__ +#define __V850_MSGBUF_H__ + +/* + * The msqid64_ds structure for v850 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct msqid64_ds { + struct ipc64_perm msg_perm; + __kernel_time_t msg_stime; /* last msgsnd time */ + unsigned long __unused1; + __kernel_time_t msg_rtime; /* last msgrcv time */ + unsigned long __unused2; + __kernel_time_t msg_ctime; /* last change time */ + unsigned long __unused3; + unsigned long msg_cbytes; /* current number of bytes on queue */ + unsigned long msg_qnum; /* number of messages in queue */ + unsigned long msg_qbytes; /* max number of bytes on queue */ + __kernel_pid_t msg_lspid; /* pid of last msgsnd */ + __kernel_pid_t msg_lrpid; /* last receive pid */ + unsigned long __unused4; + unsigned long __unused5; +}; + +#endif /* __V850_MSGBUF_H__ */ diff --git a/include/asm-v850/namei.h b/include/asm-v850/namei.h new file mode 100644 index 000000000000..ee8339b23843 --- /dev/null +++ b/include/asm-v850/namei.h @@ -0,0 +1,17 @@ +/* + * linux/include/asm-v850/namei.h + * + * Included from linux/fs/namei.c + */ + +#ifndef __V850_NAMEI_H__ +#define __V850_NAMEI_H__ + +/* This dummy routine maybe changed to something useful + * for /usr/gnemul/ emulation stuff. + * Look at asm-sparc/namei.h for details. + */ + +#define __emul_prefix() NULL + +#endif /* __V850_NAMEI_H__ */ diff --git a/include/asm-v850/nb85e.h b/include/asm-v850/nb85e.h new file mode 100644 index 000000000000..bdfa136d85d1 --- /dev/null +++ b/include/asm-v850/nb85e.h @@ -0,0 +1,21 @@ +/* + * include/asm-v850/nb85e.h -- NB85E cpu core + * + * Copyright (C) 2001,02 NEC Corporation + * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_NB85E_H__ +#define __V850_NB85E_H__ + +#include <asm/nb85e_intc.h> + +#define CPU_ARCH "v850e" + +#endif /* __V850_NB85E_H__ */ diff --git a/include/asm-v850/nb85e_cache.h b/include/asm-v850/nb85e_cache.h new file mode 100644 index 000000000000..db7f7eb9b99b --- /dev/null +++ b/include/asm-v850/nb85e_cache.h @@ -0,0 +1,106 @@ +/* + * include/asm-v850/nb85e_cache_cache.h -- Cache control for NB85E_CACHE212 and + * NB85E_CACHE213 cache memories + * + * Copyright (C) 2001 NEC Corporation + * Copyright (C) 2001 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_NB85E_CACHE_H__ +#define __V850_NB85E_CACHE_H__ + +/* Cache control registers. */ +#define NB85E_CACHE_ICC_ADDR 0xFFFFF070 +#define NB85E_CACHE_DCC_ADDR 0xFFFFF078 + +/* Size of a cache line in bytes. */ +#define NB85E_CACHE_LINE_SIZE 16 + + +#ifndef __ASSEMBLY__ + +extern inline void nb85e_cache_flush_cache (unsigned long cache_control_addr) +{ + /* + From the NB85E Instruction/Data Cache manual, how to flush + the instruction cache (ICC is the `Instruction Cache Control + Register'): + + mov 0x3, r2 + LOP0: + ld.h ICC[r0], r1 + cmp r0, r1 + bnz LOP0 + st.h r2, ICC[r0] + LOP1: - First TAG clear + ld.h ICC[r0], r1 + cmp r0, r1 + bnz LOP1 + st.h r2, ICC[r0] + LOP2: - Second TAG clear + ld.h ICC[r0], r1 + cmp r0, r1 + bnz LOP2 + */ + int cache_flush_bits, ccr_contents; + __asm__ __volatile__ ( + " mov 0x3, %1;" + "1: ld.h 0[%2], %0;" + " cmp r0, %0;" + " bnz 1b;" + " st.h %1, 0[%2];" + "2: ld.h 0[%2], %0;" + " cmp r0, %0;" + " bnz 2b;" + " st.h %1, 0[%2];" + "3: ld.h 0[%2], %0;" + " cmp r0, %0;" + " bnz 3b" + : "=&r" (ccr_contents), "=&r" (cache_flush_bits) + : "r" (cache_control_addr) + : "memory"); +} + +extern inline void nb85e_cache_flush_icache (void) +{ + nb85e_cache_flush_cache (NB85E_CACHE_ICC_ADDR); +} + +extern inline void nb85e_cache_flush_dcache (void) +{ + nb85e_cache_flush_cache (NB85E_CACHE_DCC_ADDR); +} + +extern inline void nb85e_cache_flush (void) +{ + nb85e_cache_flush_icache (); + nb85e_cache_flush_dcache (); +} + +#endif /* !__ASSEMBLY__ */ + + +/* Define standard definitions in terms of processor-specific ones. */ + +/* For <asm/cache.h> */ +#define L1_CACHE_BYTES NB85E_CACHE_LINE_SIZE + +/* For <asm/pgalloc.h> */ +#define flush_cache_all() nb85e_cache_flush () +#define flush_cache_mm(mm) nb85e_cache_flush () +#define flush_cache_range(mm, start, end) nb85e_cache_flush () +#define flush_cache_page(vma, vmaddr) nb85e_cache_flush () +#define flush_page_to_ram(page) nb85e_cache_flush () +#define flush_dcache_page(page) nb85e_cache_flush_dcache () +#define flush_icache_range(start, end) nb85e_cache_flush_icache () +#define flush_icache_page(vma,pg) nb85e_cache_flush_icache () +#define flush_icache() nb85e_cache_flush_icache () +#define flush_cache_sigtramp(vaddr) nb85e_cache_flush_icache () + +#endif /* __V850_NB85E_CACHE_H__ */ diff --git a/include/asm-v850/nb85e_intc.h b/include/asm-v850/nb85e_intc.h new file mode 100644 index 000000000000..a093ae3a17c9 --- /dev/null +++ b/include/asm-v850/nb85e_intc.h @@ -0,0 +1,126 @@ +/* + * include/asm-v850/nb85e_intc.h -- NB85E cpu core interrupt controller (INTC) + * + * Copyright (C) 2001,02 NEC Corporation + * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_NB85E_INTC_H__ +#define __V850_NB85E_INTC_H__ + + +/* There are 4 16-bit `Interrupt Mask Registers' located contiguously + starting from this base. Each interrupt uses a single bit to + indicated enabled/disabled status. */ +#define NB85E_INTC_IMR_BASE_ADDR 0xFFFFF100 +#define NB85E_INTC_IMR_ADDR(irq) (NB85E_INTC_IMR_BASE_ADDR + ((irq) >> 3)) +#define NB85E_INTC_IMR_BIT(irq) ((irq) & 0x7) + +/* Each maskable interrupt has a single-byte control register at this + address. */ +#define NB85E_INTC_IC_BASE_ADDR 0xFFFFF110 +#define NB85E_INTC_IC_ADDR(irq) (NB85E_INTC_IC_BASE_ADDR + ((irq) << 1)) +#define NB85E_INTC_IC(irq) (*(char *)NB85E_INTC_IC_ADDR(irq)) +/* Encode priority PR for storing in an interrupt control register. */ +#define NB85E_INTC_IC_PR(pr) (pr) +/* Interrupt disable bit in an interrupt control register. */ +#define NB85E_INTC_IC_MK_BIT 6 +#define NB85E_INTC_IC_MK (1 << NB85E_INTC_IC_MK_BIT) +/* Interrupt pending flag in an interrupt control register. */ +#define NB85E_INTC_IC_IF_BIT 7 +#define NB85E_INTC_IC_IF (1 << NB85E_INTC_IC_IF_BIT) + +#ifndef __ASSEMBLY__ + +/* Enable interrupt handling for interrupt IRQ. */ +static inline void nb85e_intc_enable_irq (unsigned irq) +{ + __asm__ __volatile__ ("clr1 %0, [%1]" + :: "r" (NB85E_INTC_IMR_BIT (irq)), + "r" (NB85E_INTC_IMR_ADDR (irq)) + : "memory"); +} + +/* Disable interrupt handling for interrupt IRQ. Note that any + interrupts received while disabled will be delivered once the + interrupt is enabled again, unless they are explicitly cleared using + `nb85e_intc_clear_pending_irq'. */ +static inline void nb85e_intc_disable_irq (unsigned irq) +{ + __asm__ __volatile__ ("set1 %0, [%1]" + :: "r" (NB85E_INTC_IMR_BIT (irq)), + "r" (NB85E_INTC_IMR_ADDR (irq)) + : "memory"); +} + +/* Return true if interrupt handling for interrupt IRQ is enabled. */ +static inline int nb85e_intc_irq_enabled (unsigned irq) +{ + int rval; + __asm__ __volatile__ ("tst1 %1, [%2]; setf z, %0" + : "=r" (rval) + : "r" (NB85E_INTC_IMR_BIT (irq)), + "r" (NB85E_INTC_IMR_ADDR (irq))); + return rval; +} + +/* Disable irqs from 0 until LIMIT. LIMIT must be a multiple of 8. */ +static inline void _nb85e_intc_disable_irqs (unsigned limit) +{ + unsigned long addr; + for (addr = NB85E_INTC_IMR_BASE_ADDR; limit >= 8; addr++, limit -= 8) + *(char *)addr = 0xFF; +} + +/* Disable all irqs. This is purposely a macro, because NUM_MACH_IRQS + will be only be defined later. */ +#define nb85e_intc_disable_irqs() _nb85e_intc_disable_irqs (NUM_MACH_IRQS) + +/* Clear any pending interrupts for IRQ. */ +static inline void nb85e_intc_clear_pending_irq (unsigned irq) +{ + __asm__ __volatile__ ("clr1 %0, 0[%1]" + :: "i" (NB85E_INTC_IC_IF_BIT), + "r" (NB85E_INTC_IC_ADDR (irq)) + : "memory"); +} + +/* Return true if interrupt IRQ is pending (but disabled). */ +static inline int nb85e_intc_irq_pending (unsigned irq) +{ + int rval; + __asm__ __volatile__ ("tst1 %1, 0[%2]; setf nz, %0" + : "=r" (rval) + : "i" (NB85E_INTC_IC_IF_BIT), + "r" (NB85E_INTC_IC_ADDR (irq))); + return rval; +} + + +struct nb85e_intc_irq_init { + const char *name; /* name of interrupt type */ + + /* Range of kernel irq numbers for this type: + BASE, BASE+INTERVAL, ..., BASE+INTERVAL*NUM */ + unsigned base, num, interval; + + unsigned priority; /* interrupt priority to assign */ +}; +struct hw_interrupt_type; /* fwd decl */ + +/* Initialize HW_IRQ_TYPES for INTC-controlled irqs described in array + INITS (which is terminated by an entry with the name field == 0). */ +extern void nb85e_intc_init_irq_types (struct nb85e_intc_irq_init *inits, + struct hw_interrupt_type *hw_irq_types); + + +#endif /* !__ASSEMBLY__ */ + + +#endif /* __V850_NB85E_INTC_H__ */ diff --git a/include/asm-v850/nb85e_timer_c.h b/include/asm-v850/nb85e_timer_c.h new file mode 100644 index 000000000000..069513b6de33 --- /dev/null +++ b/include/asm-v850/nb85e_timer_c.h @@ -0,0 +1,48 @@ +/* + * include/asm-v850/nb85e_timer_c.h -- `Timer C' component often used + * with the NB85E cpu core + * + * Copyright (C) 2001 NEC Corporation + * Copyright (C) 2001 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +/* NOTE: this include file currently contains only enough to allow us to + use timer C as an interrupt pass-through. */ + +#ifndef __V850_NB85E_TIMER_C_H__ +#define __V850_NB85E_TIMER_C_H__ + +#include <asm/types.h> +#include <asm/machdep.h> /* Pick up chip-specific defs. */ + + +/* Timer C (16-bit interval timers). */ + +/* Control register 0 for timer C. */ +#define NB85E_TIMER_C_TMCC0_ADDR(n) (NB85E_TIMER_C_BASE_ADDR + 0x6 + 0x10 *(n)) +#define NB85E_TIMER_C_TMCC0(n) (*(volatile u8 *)NB85E_TIMER_C_TMCC0_ADDR(n)) +#define NB85E_TIMER_C_TMCC0_CAE 0x01 /* clock action enable */ +#define NB85E_TIMER_C_TMCC0_CE 0x02 /* count enable */ +/* ... */ + +/* Control register 1 for timer C. */ +#define NB85E_TIMER_C_TMCC1_ADDR(n) (NB85E_TIMER_C_BASE_ADDR + 0x8 + 0x10 *(n)) +#define NB85E_TIMER_C_TMCC1(n) (*(volatile u8 *)NB85E_TIMER_C_TMCC1_ADDR(n)) +#define NB85E_TIMER_C_TMCC1_CMS0 0x01 /* capture/compare mode select (ccc0) */ +#define NB85E_TIMER_C_TMCC1_CMS1 0x02 /* capture/compare mode select (ccc1) */ +/* ... */ + +/* Interrupt edge-sensitivity control for timer C. */ +#define NB85E_TIMER_C_SESC_ADDR(n) (NB85E_TIMER_C_BASE_ADDR + 0x9 + 0x10 *(n)) +#define NB85E_TIMER_C_SESC(n) (*(volatile u8 *)NB85E_TIMER_C_SESC_ADDR(n)) + +/* ...etc... */ + + +#endif /* __V850_NB85E_TIMER_C_H__ */ diff --git a/include/asm-v850/nb85e_timer_d.h b/include/asm-v850/nb85e_timer_d.h new file mode 100644 index 000000000000..47973a0b5f03 --- /dev/null +++ b/include/asm-v850/nb85e_timer_d.h @@ -0,0 +1,62 @@ +/* + * include/asm-v850/nb85e_timer_d.h -- `Timer D' component often used + * with the NB85E cpu core + * + * Copyright (C) 2001,02 NEC Corporation + * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_NB85E_TIMER_D_H__ +#define __V850_NB85E_TIMER_D_H__ + +#include <asm/types.h> +#include <asm/machdep.h> /* Pick up chip-specific defs. */ + + +/* Timer D (16-bit interval timers). */ + +/* Count registers for timer D. */ +#define NB85E_TIMER_D_TMD_ADDR(n) (NB85E_TIMER_D_TMD_BASE_ADDR + 0x10 * (n)) +#define NB85E_TIMER_D_TMD(n) (*(volatile u16 *)NB85E_TIMER_D_TMD_ADDR(n)) + +/* Count compare registers for timer D. */ +#define NB85E_TIMER_D_CMD_ADDR(n) (NB85E_TIMER_D_CMD_BASE_ADDR + 0x10 * (n)) +#define NB85E_TIMER_D_CMD(n) (*(u16 *)NB85E_TIMER_D_CMD_ADDR(n)) + +/* Control registers for timer D. */ +#define NB85E_TIMER_D_TMCD_ADDR(n) (NB85E_TIMER_D_TMCD_BASE_ADDR + 0x10 * (n)) +#define NB85E_TIMER_D_TMCD(n) (*(volatile u8 *)NB85E_TIMER_D_TMCD_ADDR(n)) +/* Control bits for timer D. */ +#define NB85E_TIMER_D_TMCD_CE 0x2 /* count enable */ +#define NB85E_TIMER_D_TMCD_CAE 0x1 /* clock action enable */ +/* Clock divider setting (log2). */ +#define NB85E_TIMER_D_TMCD_CS(divlog2) (((divlog2) - NB85E_TIMER_D_TMCD_CS_MIN) << 4) +/* Minimum clock divider setting (log2). */ +#ifndef NB85E_TIMER_D_TMCD_CS_MIN /* Can be overridden by mach-specific hdrs */ +#define NB85E_TIMER_D_TMCD_CS_MIN 2 /* Default is correct for the v850e/ma1 */ +#endif +/* Maximum clock divider setting (log2). */ +#define NB85E_TIMER_D_TMCD_CS_MAX (NB85E_TIMER_D_TMCD_CS_MIN + 7) + +/* Return the clock-divider (log2) of timer D unit N. */ +#define NB85E_TIMER_D_DIVLOG2(n) \ + (((NB85E_TIMER_D_TMCD(n) >> 4) & 0x7) + NB85E_TIMER_D_TMCD_CS_MIN) + + +#ifndef __ASSEMBLY__ + +/* Start interval timer TIMER (0-3). The timer will issue the + corresponding INTCMD interrupt RATE times per second. This function + does not enable the interrupt. */ +extern void nb85e_timer_d_configure (unsigned timer, unsigned rate); + +#endif /* !__ASSEMBLY__ */ + + +#endif /* __V850_NB85E_TIMER_D_H__ */ diff --git a/include/asm-v850/nb85e_uart.h b/include/asm-v850/nb85e_uart.h new file mode 100644 index 000000000000..129872859e5e --- /dev/null +++ b/include/asm-v850/nb85e_uart.h @@ -0,0 +1,142 @@ +/* + * include/asm-v850/nb85e_uart.h -- On-chip UART often used with the + * NB85E cpu core + * + * Copyright (C) 2001,02 NEC Corporation + * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +/* There's not actually a single UART implementation used by nb85e + derivatives, but rather a series of implementations that are all + `close' to one another. This file attempts to capture some + commonality between them. */ + +#ifndef __V850_NB85E_UART_H__ +#define __V850_NB85E_UART_H__ + +#include <asm/types.h> +#include <asm/machdep.h> /* Pick up chip-specific defs. */ + + +/* The base address of the UART control registers for channel N. + The default is the address used on the V850E/MA1. */ +#ifndef NB85E_UART_BASE_ADDR +#define NB85E_UART_BASE_ADDR(n) (0xFFFFFA00 + 0x10 * (n)) +#endif + +/* Addresses of specific UART control registers for channel N. + The defaults are the addresses used on the V850E/MA1; if a platform + wants to redefine any of these, it must redefine them all. */ +#ifndef NB85E_UART_ASIM_ADDR +#define NB85E_UART_ASIM_ADDR(n) (NB85E_UART_BASE_ADDR(n) + 0x0) +#define NB85E_UART_RXB_ADDR(n) (NB85E_UART_BASE_ADDR(n) + 0x2) +#define NB85E_UART_ASIS_ADDR(n) (NB85E_UART_BASE_ADDR(n) + 0x3) +#define NB85E_UART_TXB_ADDR(n) (NB85E_UART_BASE_ADDR(n) + 0x4) +#define NB85E_UART_ASIF_ADDR(n) (NB85E_UART_BASE_ADDR(n) + 0x5) +#define NB85E_UART_CKSR_ADDR(n) (NB85E_UART_BASE_ADDR(n) + 0x6) +#define NB85E_UART_BRGC_ADDR(n) (NB85E_UART_BASE_ADDR(n) + 0x7) +#endif + + +/* UART config registers. */ +#define NB85E_UART_ASIM(n) (*(volatile u8 *)NB85E_UART_ASIM_ADDR(n)) +/* Control bits for config registers. */ +#define NB85E_UART_ASIM_CAE 0x80 /* clock enable */ +#define NB85E_UART_ASIM_TXE 0x40 /* transmit enable */ +#define NB85E_UART_ASIM_RXE 0x20 /* receive enable */ +#define NB85E_UART_ASIM_PS_MASK 0x18 /* mask covering parity-select bits */ +#define NB85E_UART_ASIM_PS_NONE 0x00 /* no parity */ +#define NB85E_UART_ASIM_PS_ZERO 0x08 /* zero parity */ +#define NB85E_UART_ASIM_PS_ODD 0x10 /* odd parity */ +#define NB85E_UART_ASIM_PS_EVEN 0x18 /* even parity */ +#define NB85E_UART_ASIM_CL_8 0x04 /* char len is 8 bits (otherwise, 7) */ +#define NB85E_UART_ASIM_SL_2 0x02 /* 2 stop bits (otherwise, 1) */ +#define NB85E_UART_ASIM_ISRM 0x01 /* generate INTSR interrupt on errors + (otherwise, generate INTSER) */ + +/* UART serial interface status registers. */ +#define NB85E_UART_ASIS(n) (*(volatile u8 *)NB85E_UART_ASIS_ADDR(n)) +/* Control bits for status registers. */ +#define NB85E_UART_ASIS_PE 0x04 /* parity error */ +#define NB85E_UART_ASIS_FE 0x02 /* framing error */ +#define NB85E_UART_ASIS_OVE 0x01 /* overrun error */ + +/* UART serial interface transmission status registers. */ +#define NB85E_UART_ASIF(n) (*(volatile u8 *)NB85E_UART_ASIF_ADDR(n)) +#define NB85E_UART_ASIF_TXBF 0x02 /* transmit buffer flag (data in TXB) */ +#define NB85E_UART_ASIF_TXSF 0x01 /* transmit shift flag (sending data) */ + +/* UART receive buffer register. */ +#define NB85E_UART_RXB(n) (*(volatile u8 *)NB85E_UART_RXB_ADDR(n)) + +/* UART transmit buffer register. */ +#define NB85E_UART_TXB(n) (*(volatile u8 *)NB85E_UART_TXB_ADDR(n)) + +/* UART baud-rate generator control registers. */ +#define NB85E_UART_CKSR(n) (*(volatile u8 *)NB85E_UART_CKSR_ADDR(n)) +#define NB85E_UART_CKSR_MAX 11 +#define NB85E_UART_CKSR_MAX_FREQ (25*1000*1000) +#define NB85E_UART_BRGC(n) (*(volatile u8 *)NB85E_UART_BRGC_ADDR(n)) + + +/* This UART doesn't implement RTS/CTS by default, but some platforms + implement them externally, so check to see if <asm/machdep.h> defined + anything. */ +#ifdef NB85E_UART_CTS +#define nb85e_uart_cts(n) NB85E_UART_CTS(n) +#else +#define nb85e_uart_cts(n) (1) +#endif + +/* Do the same for RTS. */ +#ifdef NB85E_UART_SET_RTS +#define nb85e_uart_set_rts(n,v) NB85E_UART_SET_RTS(n,v) +#else +#define nb85e_uart_set_rts(n,v) ((void)0) +#endif + +/* Return true if all characters awaiting transmission on uart channel N + have been transmitted. */ +#define nb85e_uart_xmit_done(n) \ + (! (NB85E_UART_ASIF(n) & NB85E_UART_ASIF_TXBF)) +/* Wait for this to be true. */ +#define nb85e_uart_wait_for_xmit_done(n) \ + do { } while (! nb85e_uart_xmit_done (n)) + +/* Return true if uart channel N is ready to transmit a character. */ +#define nb85e_uart_xmit_ok(n) \ + (nb85e_uart_xmit_done(n) && nb85e_uart_cts(n)) +/* Wait for this to be true. */ +#define nb85e_uart_wait_for_xmit_ok(n) \ + do { } while (! nb85e_uart_xmit_ok (n)) + +/* Write character CH to uart channel N. */ +#define nb85e_uart_putc(n, ch) (NB85E_UART_TXB(n) = (ch)) + + +#define NB85E_UART_MINOR_BASE 64 + + +#ifndef __ASSEMBLY__ + +/* Setup a console using channel 0 of the builtin uart. */ +extern void nb85e_uart_cons_init (unsigned chan); + +/* Configure and turn on uart channel CHAN, using the termios `control + modes' bits in CFLAGS, and a baud-rate of BAUD. */ +void nb85e_uart_configure (unsigned chan, unsigned cflags, unsigned baud); + +/* If the macro NB85E_UART_PRE_CONFIGURE is defined (presumably by a + <asm/machdep.h>), it is called from nb85e_uart_pre_configure before + anything else is done, with interrupts disabled. */ + +#endif /* !__ASSEMBLY__ */ + + +#endif /* __V850_NB85E_UART_H__ */ diff --git a/include/asm-v850/nb85e_utils.h b/include/asm-v850/nb85e_utils.h new file mode 100644 index 000000000000..56314a2e070a --- /dev/null +++ b/include/asm-v850/nb85e_utils.h @@ -0,0 +1,35 @@ +/* + * include/asm-v850/nb85e_utils.h -- Utility functions associated with + * the NB85E cpu core + * + * Copyright (C) 2001 NEC Corporation + * Copyright (C) 2001 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_NB85E_UTILS_H__ +#define __V850_NB85E_UTILS_H__ + +/* Calculate counter clock-divider and count values to attain the + desired frequency RATE from the base frequency BASE_FREQ. The + counter is expected to have a clock-divider, which can divide the + system cpu clock by a power of two value from MIN_DIVLOG2 to + MAX_DIV_LOG2, and a word-size of COUNTER_SIZE bits (the counter + counts up and resets whenever it's equal to the compare register, + generating an interrupt or whatever when it does so). The returned + values are: *DIVLOG2 -- log2 of the desired clock divider and *COUNT + -- the counter compare value to use. Returns true if it was possible + to find a reasonable value, otherwise false (and the other return + values will be set to be as good as possible). */ +extern int calc_counter_params (unsigned long base_freq, + unsigned long rate, + unsigned min_divlog2, unsigned max_divlog2, + unsigned counter_size, + unsigned *divlog2, unsigned *count); + +#endif /* __V850_NB85E_UTILS_H__ */ diff --git a/include/asm-v850/page.h b/include/asm-v850/page.h new file mode 100644 index 000000000000..0f51702eed2a --- /dev/null +++ b/include/asm-v850/page.h @@ -0,0 +1,144 @@ +/* + * include/asm-v850/page.h -- VM ops + * + * Copyright (C) 2001, 2002 NEC Corporation + * Copyright (C) 2001, 2002 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_PAGE_H__ +#define __V850_PAGE_H__ + +#include <asm/machdep.h> + + +#define PAGE_SHIFT 12 +#define PAGE_SIZE (1UL << PAGE_SHIFT) +#define PAGE_MASK (~(PAGE_SIZE-1)) + + +/* + * PAGE_OFFSET -- the first address of the first page of memory. For archs with + * no MMU this corresponds to the first free page in physical memory (aligned + * on a page boundary). + */ +#ifndef PAGE_OFFSET +#define PAGE_OFFSET 0x0000000 +#endif + + +#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ + +#define STRICT_MM_TYPECHECKS + +#define clear_page(page) memset ((void *)(page), 0, PAGE_SIZE) +#define copy_page(to, from) memcpy ((void *)(to), (void *)from, PAGE_SIZE) + +#define clear_user_page(page, vaddr, pg) clear_page (page) +#define copy_user_page(to, from, vaddr,pg) copy_page (to, from) + +#ifdef STRICT_MM_TYPECHECKS +/* + * These are used to make use of C type-checking.. + */ + +typedef struct { unsigned long pte; } pte_t; +typedef struct { unsigned long pmd; } pmd_t; +typedef struct { unsigned long pgd; } pgd_t; +typedef struct { unsigned long pgprot; } pgprot_t; + +#define pte_val(x) ((x).pte) +#define pmd_val(x) ((x).pmd) +#define pgd_val(x) ((x).pgd) +#define pgprot_val(x) ((x).pgprot) + +#define __pte(x) ((pte_t) { (x) } ) +#define __pmd(x) ((pmd_t) { (x) } ) +#define __pgd(x) ((pgd_t) { (x) } ) +#define __pgprot(x) ((pgprot_t) { (x) } ) + +#else /* !STRICT_MM_TYPECHECKS */ +/* + * .. while these make it easier on the compiler + */ + +typedef unsigned long pte_t; +typedef unsigned long pmd_t; +typedef unsigned long pgd_t; +typedef unsigned long pgprot_t; + +#define pte_val(x) (x) +#define pmd_val(x) (x) +#define pgd_val(x) (x) +#define pgprot_val(x) (x) + +#define __pte(x) (x) +#define __pmd(x) (x) +#define __pgd(x) (x) +#define __pgprot(x) (x) + +#endif /* STRICT_MM_TYPECHECKS */ + +#endif /* !__ASSEMBLY__ */ + + +/* to align the pointer to the (next) page boundary */ +#define PAGE_ALIGN(addr) (((addr) + PAGE_SIZE - 1) & PAGE_MASK) + + +#ifndef __ASSEMBLY__ + +extern void __bug (void) __attribute__ ((noreturn)); +#define BUG() __bug() +#define PAGE_BUG(page) __bug() + +/* Pure 2^n version of get_order */ +extern __inline__ int get_order (unsigned long size) +{ + int order; + + size = (size-1) >> (PAGE_SHIFT-1); + order = -1; + do { + size >>= 1; + order++; + } while (size); + return order; +} + +#endif /* !__ASSEMBLY__ */ + + +/* No current v850 processor has virtual memory. */ +#define __virt_to_phys(addr) (addr) +#define __phys_to_virt(addr) (addr) + +#define virt_to_pfn(kaddr) (__virt_to_phys (kaddr) >> PAGE_SHIFT) +#define pfn_to_virt(pfn) __phys_to_virt ((pfn) << PAGE_SHIFT) + +#define MAP_NR(kaddr) \ + (((unsigned long)(kaddr) - PAGE_OFFSET) >> PAGE_SHIFT) +#define virt_to_page(kaddr) (mem_map + MAP_NR (kaddr)) +#define page_to_virt(page) \ + ((((page) - mem_map) << PAGE_SHIFT) + PAGE_OFFSET) + +#define pfn_to_page(pfn) virt_to_page (pfn_to_virt (pfn)) +#define page_to_pfn(page) virt_to_pfn (page_to_virt (page)) + +#define virt_addr_valid(kaddr) \ + (((void *)(kaddr) >= (void *)PAGE_OFFSET) && MAP_NR (kaddr) < max_mapnr) + + +#define __pa(x) __virt_to_phys ((unsigned long)(x)) +#define __va(x) ((void *)__phys_to_virt ((unsigned long)(x))) + + +#endif /* KERNEL */ + +#endif /* __V850_PAGE_H__ */ diff --git a/include/asm-v850/param.h b/include/asm-v850/param.h new file mode 100644 index 000000000000..e502bfea120f --- /dev/null +++ b/include/asm-v850/param.h @@ -0,0 +1,36 @@ +/* + * include/asm-v850/param.h -- Varions kernel parameters + * + * Copyright (C) 2001,02 NEC Corporation + * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_PARAM_H__ +#define __V850_PARAM_H__ + +#include <asm/machdep.h> /* For HZ */ + +#define EXEC_PAGESIZE 4096 + +#ifndef NGROUPS +#define NGROUPS 32 +#endif + +#ifndef NOGROUP +#define NOGROUP (-1) +#endif + +#define MAXHOSTNAMELEN 64 /* max length of hostname */ + +#ifdef __KERNEL__ +# define USER_HZ 100 +# define CLOCKS_PER_SEC USER_HZ +#endif + +#endif /* __V850_PARAM_H__ */ diff --git a/include/asm-v850/pci.h b/include/asm-v850/pci.h new file mode 100644 index 000000000000..5ec5944d2b37 --- /dev/null +++ b/include/asm-v850/pci.h @@ -0,0 +1,77 @@ +/* + * include/asm-v850/pci.h -- PCI support + * + * Copyright (C) 2001,02 NEC Corporation + * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_PCI_H__ +#define __V850_PCI_H__ + +/* Get any platform-dependent definitions. */ +#include <asm/machdep.h> + +/* Generic declarations. */ + +struct scatterlist; + +extern void pcibios_set_master (struct pci_dev *dev); + +/* `Grant' to PDEV the memory block at CPU_ADDR, for doing DMA. The + 32-bit PCI bus mastering address to use is returned. the device owns + this memory until either pci_unmap_single or pci_dma_sync_single is + performed. */ +extern dma_addr_t +pci_map_single (struct pci_dev *pdev, void *cpu_addr, size_t size, int dir); + +/* Return to the CPU the PCI DMA memory block previously `granted' to + PDEV, at DMA_ADDR. */ +extern void +pci_unmap_single (struct pci_dev *pdev, dma_addr_t dma_addr, size_t size, + int dir); + +/* Make physical memory consistant for a single streaming mode DMA + translation after a transfer. + + If you perform a pci_map_single() but wish to interrogate the + buffer using the cpu, yet do not wish to teardown the PCI dma + mapping, you must call this function before doing so. At the next + point you give the PCI dma address back to the card, the device + again owns the buffer. */ +extern void +pci_dma_sync_single (struct pci_dev *dev, dma_addr_t dma_addr, size_t size, + int dir); + + +/* Do multiple DMA mappings at once. */ +extern int +pci_map_sg (struct pci_dev *pdev, struct scatterlist *sg, int sg_len, int dir); + +/* Unmap multiple DMA mappings at once. */ +extern void +pci_unmap_sg (struct pci_dev *pdev, struct scatterlist *sg, int sg_len, + int dir); + +/* Allocate and map kernel buffer using consistent mode DMA for PCI + device. Returns non-NULL cpu-view pointer to the buffer if + successful and sets *DMA_ADDR to the pci side dma address as well, + else DMA_ADDR is undefined. */ +extern void * +pci_alloc_consistent (struct pci_dev *pdev, size_t size, dma_addr_t *dma_addr); + +/* Free and unmap a consistent DMA buffer. CPU_ADDR and DMA_ADDR must + be values that were returned from pci_alloc_consistent. SIZE must be + the same as what as passed into pci_alloc_consistent. References to + the memory and mappings assosciated with CPU_ADDR or DMA_ADDR past + this call are illegal. */ +extern void +pci_free_consistent (struct pci_dev *pdev, size_t size, void *cpu_addr, + dma_addr_t dma_addr); + +#endif /* __V850_PCI_H__ */ diff --git a/include/asm-v850/percpu.h b/include/asm-v850/percpu.h new file mode 100644 index 000000000000..1c145090c0c0 --- /dev/null +++ b/include/asm-v850/percpu.h @@ -0,0 +1,6 @@ +#ifndef __V850_PERCPU_H__ +#define __V850_PERCPU_H__ + +#include <asm-generic/percpu.h> + +#endif /* __V850_PERCPU_H__ */ diff --git a/include/asm-v850/pgalloc.h b/include/asm-v850/pgalloc.h new file mode 100644 index 000000000000..b91eb2d02bfd --- /dev/null +++ b/include/asm-v850/pgalloc.h @@ -0,0 +1,22 @@ +/* + * include/asm-v850/pgalloc.h + * + * Copyright (C) 2001,02 NEC Corporation + * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_PGALLOC_H__ +#define __V850_PGALLOC_H__ + +#include <linux/mm.h> /* some crap code expects this */ + +/* ... and then, there was one. */ +#define check_pgt_cache() ((void)0) + +#endif /* __V850_PGALLOC_H__ */ diff --git a/include/asm-v850/pgtable.h b/include/asm-v850/pgtable.h new file mode 100644 index 000000000000..f71de3385eae --- /dev/null +++ b/include/asm-v850/pgtable.h @@ -0,0 +1,58 @@ +#ifndef __V850_PGTABLE_H__ +#define __V850_PGTABLE_H__ + +#include <linux/config.h> +#include <asm/page.h> + + +typedef pte_t *pte_addr_t; + +#define pgd_present(pgd) (1) /* pages are always present on NO_MM */ +#define pgd_none(pgd) (0) +#define pgd_bad(pgd) (0) +#define pgd_clear(pgdp) ((void)0) + +#define pmd_offset(a, b) ((void *)0) + +#define kern_addr_valid(addr) (1) + + +#define __swp_type(x) (0) +#define __swp_offset(x) (0) +#define __swp_entry(typ,off) ((swp_entry_t) { ((typ) | ((off) << 7)) }) +#define __pte_to_swp_entry(pte) ((swp_entry_t) { pte_val(pte) }) +#define __swp_entry_to_pte(x) ((pte_t) { (x).val }) + + +/* These mean nothing to !CONFIG_MMU. */ +#define PAGE_NONE __pgprot(0) +#define PAGE_SHARED __pgprot(0) +#define PAGE_COPY __pgprot(0) +#define PAGE_READONLY __pgprot(0) +#define PAGE_KERNEL __pgprot(0) + + +/* + * ZERO_PAGE is a global shared page that is always zero: used + * for zero-mapped memory areas etc. When CONFIG_MMU is not defined, this + * should never actually be used, so just define it to something that's + * will hopefully cause a bus error if it is. + */ +#define ZERO_PAGE(vaddr) ((void *)0x87654321) + + +/* Some bogus code in procfs uses these; whatever. */ +#define VMALLOC_START 0 +#define VMALLOC_END (~0) + + +extern void paging_init (void); +#define swapper_pg_dir ((pgd_t *) 0) + +#define pgtable_cache_init() ((void)0) + + +extern unsigned int kobjsize(const void *objp); + + +#endif /* __V850_PGTABLE_H__ */ diff --git a/include/asm-v850/poll.h b/include/asm-v850/poll.h new file mode 100644 index 000000000000..0369562c7e15 --- /dev/null +++ b/include/asm-v850/poll.h @@ -0,0 +1,23 @@ +#ifndef __V850_POLL_H__ +#define __V850_POLL_H__ + +#define POLLIN 0x0001 +#define POLLPRI 0x0002 +#define POLLOUT 0x0004 +#define POLLERR 0x0008 +#define POLLHUP 0x0010 +#define POLLNVAL 0x0020 +#define POLLRDNORM 0x0040 +#define POLLWRNORM POLLOUT +#define POLLRDBAND 0x0080 +#define POLLWRBAND 0x0100 +#define POLLMSG 0x0400 +#define POLLREMOVE 0x1000 + +struct pollfd { + int fd; + short events; + short revents; +}; + +#endif /* __V850_POLL_H__ */ diff --git a/include/asm-v850/posix_types.h b/include/asm-v850/posix_types.h new file mode 100644 index 000000000000..91feade6acfb --- /dev/null +++ b/include/asm-v850/posix_types.h @@ -0,0 +1,73 @@ +/* + * include/asm-v850/posix_types.h -- Kernel versions of standard types + * + * Copyright (C) 2001,02 NEC Corporation + * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_POSIX_TYPES_H__ +#define __V850_POSIX_TYPES_H__ + +typedef unsigned int __kernel_dev_t; +typedef unsigned long __kernel_ino_t; +typedef unsigned long long __kernel_ino64_t; +typedef unsigned int __kernel_mode_t; +typedef unsigned int __kernel_nlink_t; +typedef long __kernel_off_t; +typedef long long __kernel_loff_t; +typedef int __kernel_pid_t; +typedef unsigned short __kernel_ipc_pid_t; +typedef unsigned int __kernel_uid_t; +typedef unsigned int __kernel_gid_t; +typedef unsigned int __kernel_size_t; +typedef int __kernel_ssize_t; +typedef int __kernel_ptrdiff_t; +typedef long __kernel_time_t; +typedef long __kernel_suseconds_t; +typedef long __kernel_clock_t; +typedef int __kernel_daddr_t; +typedef char * __kernel_caddr_t; +typedef unsigned short __kernel_uid16_t; +typedef unsigned short __kernel_gid16_t; +typedef unsigned int __kernel_uid32_t; +typedef unsigned int __kernel_gid32_t; + +/* Some bogus code depends on this; we don't care. */ +typedef __kernel_uid_t __kernel_old_uid_t; + + +typedef struct { +#if defined(__KERNEL__) || defined(__USE_ALL) + int val[2]; +#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */ + int __val[2]; +#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */ +} __kernel_fsid_t; + + +#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) + +#include <asm/bitops.h> + +#undef __FD_SET +#define __FD_SET(fd, fd_set) \ + __set_bit (fd, (void *)&((__kernel_fd_set *)fd_set)->fds_bits) +#undef __FD_CLR +#define __FD_CLR(fd, fd_set) \ + __clear_bit (fd, (void *)&((__kernel_fd_set *)fd_set)->fds_bits) +#undef __FD_ISSET +#define __FD_ISSET(fd, fd_set) \ + __test_bit (fd, (void *)&((__kernel_fd_set *)fd_set)->fds_bits) +#undef __FD_ZERO +#define __FD_ZERO(fd_set) \ + memset (fd_set, 0, sizeof (*(fd_set *)fd_set)) + +#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */ + +#endif /* __V850_POSIX_TYPES_H__ */ diff --git a/include/asm-v850/processor.h b/include/asm-v850/processor.h new file mode 100644 index 000000000000..af4e6f281fda --- /dev/null +++ b/include/asm-v850/processor.h @@ -0,0 +1,116 @@ +/* + * include/asm-v850/processor.h + * + * Copyright (C) 2001,02 NEC Corporation + * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_PROCESSOR_H__ +#define __V850_PROCESSOR_H__ + +#include <linux/config.h> + +#include <asm/ptrace.h> +#include <asm/thread_info.h> +#include <asm/entry.h> + +/* Some code expects `segment' stuff to be defined here. */ +#include <asm/segment.h> + + +/* + * The only places this is used seem to be horrible bletcherous kludges, + * so we just define it to be as large as possible. + */ +#define TASK_SIZE (0xFFFFFFFF) + + +#ifndef __ASSEMBLY__ + + +/* + * Default implementation of macro that returns current + * instruction pointer ("program counter"). + */ +#define current_text_addr() ({ __label__ _l; _l: &&_l;}) + + +/* + * Bus types + */ +#define EISA_bus 0 +#define EISA_bus__is_a_macro /* for versions in ksyms.c */ +#define MCA_bus 0 +#define MCA_bus__is_a_macro /* for versions in ksyms.c */ + +/* If you change this, you must change the associated assembly-languages + constants defined below, THREAD_*. */ +struct thread_struct { + /* kernel stack pointer (must be first field in structure) */ + unsigned long ksp; +}; + +#define INIT_THREAD { sizeof init_stack + (unsigned long)init_stack } + + +/* Do necessary setup to start up a newly executed thread. */ +extern inline void start_thread (struct pt_regs *regs, + unsigned long pc, unsigned long usp) +{ + regs->pc = pc; + regs->gpr[GPR_SP] = usp; + regs->kernel_mode = 0; +} + +/* Free all resources held by a thread. */ +extern inline void release_thread (struct task_struct *dead_task) +{ +} + +extern int kernel_thread (int (*fn)(void *), void * arg, unsigned long flags); + +/* Free current thread data structures etc. */ +static inline void exit_thread (void) +{ +} + +/* Return saved (kernel) PC of a blocked thread. */ +extern inline unsigned long thread_saved_pc (struct thread_struct *t) +{ + struct pt_regs *r = (struct pt_regs *)(t->ksp + STATE_SAVE_PT_OFFSET); + /* Actually, we return the LP register, because the thread is + actually blocked in switch_thread, and we're interested in + the PC it will _return_ to. */ + return r->gpr[GPR_LP]; +} + +unsigned long get_wchan (struct task_struct *p); + + +/* Return some info about the user process TASK. */ +#define task_tos(task) ((unsigned long)(task)->thread_info + THREAD_SIZE) +#define task_regs(task) ((struct pt_regs *)task_tos (task) - 1) +#define task_sp(task) (task_regs (task)->gpr[GPR_SP]) +#define task_pc(task) (task_regs (task)->pc) +/* Grotty old names for some. */ +#define KSTK_EIP(task) task_pc (task) +#define KSTK_ESP(task) task_sp (task) + + +#define cpu_relax() ((void)0) + + +#else /* __ASSEMBLY__ */ + +#define THREAD_KSP 0 + +#endif /* !__ASSEMBLY__ */ + + +#endif /* __V850_PROCESSOR_H__ */ diff --git a/include/asm-v850/ptrace.h b/include/asm-v850/ptrace.h new file mode 100644 index 000000000000..62279c9eba45 --- /dev/null +++ b/include/asm-v850/ptrace.h @@ -0,0 +1,111 @@ +/* + * include/asm-v850/ptrace.h -- Access to CPU registers + * + * Copyright (C) 2001,02 NEC Corporation + * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_PTRACE_H__ +#define __V850_PTRACE_H__ + + +/* v850 general purpose registers with special meanings. */ +#define GPR_ZERO 0 /* constant zero */ +#define GPR_ASM 1 /* reserved for assembler */ +#define GPR_SP 3 /* stack pointer */ +#define GPR_GP 4 /* global data pointer */ +#define GPR_TP 5 /* `text pointer' */ +#define GPR_EP 30 /* `element pointer' */ +#define GPR_LP 31 /* link pointer (current return address) */ + +/* These aren't official names, but they make some code more descriptive. */ +#define GPR_ARG0 6 +#define GPR_ARG1 7 +#define GPR_ARG2 8 +#define GPR_ARG3 9 +#define GPR_RVAL0 10 +#define GPR_RVAL1 11 +#define GPR_RVAL GPR_RVAL0 + +#define NUM_GPRS 32 + +/* v850 `system' registers. */ +#define SR_EIPC 0 +#define SR_EIPSW 1 +#define SR_FEPC 2 +#define SR_FEPSW 3 +#define SR_ECR 4 +#define SR_PSW 5 +#define SR_CTPC 16 +#define SR_CTPSW 17 +#define SR_DBPC 18 +#define SR_DBPSW 19 +#define SR_CTBP 20 +#define SR_DIR 21 +#define SR_ASID 23 + + +#ifndef __ASSEMBLY__ + +typedef unsigned long v850_reg_t; + +/* How processor state is stored on the stack during a syscall/signal. + If you change this structure, change the associated assembly-language + macros below too (PT_*)! */ +struct pt_regs +{ + /* General purpose registers. */ + v850_reg_t gpr[NUM_GPRS]; + + v850_reg_t pc; /* program counter */ + v850_reg_t psw; /* program status word */ + + /* Registers used by `callt' instruction: */ + v850_reg_t ctpc; /* saved program counter */ + v850_reg_t ctpsw; /* saved psw */ + v850_reg_t ctbp; /* base pointer for callt table */ + + char kernel_mode; /* 1 if in `kernel mode', 0 if user mode */ +}; + + +#define instruction_pointer(regs) ((regs)->pc) +#define user_mode(regs) (!(regs)->kernel_mode) + +/* When a struct pt_regs is used to save user state for a system call in + the kernel, the system call is stored in the space for R0 (since it's + never used otherwise, R0 being a constant 0). Non-system-calls + simply store 0 there. */ +#define PT_REGS_SYSCALL(regs) (regs)->gpr[0] +#define PT_REGS_SET_SYSCALL(regs, val) ((regs)->gpr[0] = (val)) + +#endif /* !__ASSEMBLY__ */ + + +/* The number of bytes used to store each register. */ +#define _PT_REG_SIZE 4 + +/* Offset of a general purpose register in a stuct pt_regs. */ +#define PT_GPR(num) ((num) * _PT_REG_SIZE) + +/* Offsets of various special registers & fields in a struct pt_regs. */ +#define PT_PC ((NUM_GPRS + 0) * _PT_REG_SIZE) +#define PT_PSW ((NUM_GPRS + 1) * _PT_REG_SIZE) +#define PT_CTPC ((NUM_GPRS + 2) * _PT_REG_SIZE) +#define PT_CTPSW ((NUM_GPRS + 3) * _PT_REG_SIZE) +#define PT_CTBP ((NUM_GPRS + 4) * _PT_REG_SIZE) +#define PT_KERNEL_MODE ((NUM_GPRS + 5) * _PT_REG_SIZE) + +#define PT_SYSCALL PT_GPR(0) + +/* Size of struct pt_regs, including alignment. */ +#define PT_SIZE ((NUM_GPRS + 6) * _PT_REG_SIZE) + + +#endif /* __V850_PTRACE_H__ */ diff --git a/include/asm-v850/resource.h b/include/asm-v850/resource.h new file mode 100644 index 000000000000..6f59c85fe0bf --- /dev/null +++ b/include/asm-v850/resource.h @@ -0,0 +1,47 @@ +#ifndef __V850_RESOURCE_H__ +#define __V850_RESOURCE_H__ + +/* + * Resource limits + */ + +#define RLIMIT_CPU 0 /* CPU time in ms */ +#define RLIMIT_FSIZE 1 /* Maximum filesize */ +#define RLIMIT_DATA 2 /* max data size */ +#define RLIMIT_STACK 3 /* max stack size */ +#define RLIMIT_CORE 4 /* max core file size */ +#define RLIMIT_RSS 5 /* max resident set size */ +#define RLIMIT_NPROC 6 /* max number of processes */ +#define RLIMIT_NOFILE 7 /* max number of open files */ +#define RLIMIT_MEMLOCK 8 /* max locked-in-memory address space */ +#define RLIMIT_AS 9 /* address space limit */ +#define RLIMIT_LOCKS 10 /* maximum file locks held */ + +#define RLIM_NLIMITS 11 + +/* + * SuS says limits have to be unsigned. + * Which makes a ton more sense anyway. + */ +#define RLIM_INFINITY (~0UL) + +#ifdef __KERNEL__ + +#define INIT_RLIMITS \ +{ \ + { RLIM_INFINITY, RLIM_INFINITY }, \ + { RLIM_INFINITY, RLIM_INFINITY }, \ + { RLIM_INFINITY, RLIM_INFINITY }, \ + { _STK_LIM, RLIM_INFINITY }, \ + { 0, RLIM_INFINITY }, \ + { RLIM_INFINITY, RLIM_INFINITY }, \ + { 0, 0 }, \ + { INR_OPEN, INR_OPEN }, \ + { RLIM_INFINITY, RLIM_INFINITY }, \ + { RLIM_INFINITY, RLIM_INFINITY }, \ + { RLIM_INFINITY, RLIM_INFINITY }, \ +} + +#endif /* __KERNEL__ */ + +#endif /* __V850_RESOURCE_H__ */ diff --git a/include/asm-v850/rmap.h b/include/asm-v850/rmap.h new file mode 100644 index 000000000000..c0ebee6f4eae --- /dev/null +++ b/include/asm-v850/rmap.h @@ -0,0 +1 @@ +/* Do not need anything here */ diff --git a/include/asm-v850/rte_cb.h b/include/asm-v850/rte_cb.h new file mode 100644 index 000000000000..eb21170add51 --- /dev/null +++ b/include/asm-v850/rte_cb.h @@ -0,0 +1,87 @@ +/* + * include/asm-v850/rte_cb.h -- Midas labs RTE-CB series of evaluation boards + * + * Copyright (C) 2001,02 NEC Corporation + * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_RTE_CB_H__ +#define __V850_RTE_CB_H__ + + +/* CPU addresses of GBUS memory spaces. */ +#define GCS0_ADDR 0x05000000 /* GCS0 - Common SRAM (2MB) */ +#define GCS0_SIZE 0x00200000 /* 2MB */ +#define GCS1_ADDR 0x06000000 /* GCS1 - Flash ROM (8MB) */ +#define GCS1_SIZE 0x00800000 /* 8MB */ +#define GCS2_ADDR 0x07900000 /* GCS2 - I/O registers */ +#define GCS2_SIZE 0x00400000 /* 4MB */ +#define GCS5_ADDR 0x04000000 /* GCS5 - PCI bus space */ +#define GCS5_SIZE 0x01000000 /* 16MB */ +#define GCS6_ADDR 0x07980000 /* GCS6 - PCI control registers */ +#define GCS6_SIZE 0x00000200 /* 512B */ + +/* The SRAM on the Mother-A motherboard. */ +#define MB_A_SRAM_ADDR GCS0_ADDR +#define MB_A_SRAM_SIZE 0x00200000 /* 2MB */ + + +/* GBUS interrupt support. */ +#define GBUS_INT_BASE_IRQ NUM_CPU_IRQS +#define GBUS_INT_BASE_ADDR (GCS2_ADDR + 0x00006000) +#include <asm/gbus_int.h> + +/* We define NUM_MACH_IRQS to include extra interrupts from the GBUS. */ +#define NUM_MACH_IRQS (NUM_CPU_IRQS + IRQ_GBUS_INT_NUM) + +/* Some specific interrupts. */ +#define IRQ_MB_A_LAN IRQ_GBUS_INT(10) +#define IRQ_MB_A_PCI1(n) (IRQ_GBUS_INT(16) + (n)) +#define IRQ_MB_A_PCI1_NUM 4 +#define IRQ_MB_A_PCI2(n) (IRQ_GBUS_INT(20) + (n)) +#define IRQ_MB_A_PCI2_NUM 4 +#define IRQ_MB_A_EXT(n) (IRQ_GBUS_INT(24) + (n)) +#define IRQ_MB_A_EXT_NUM 4 +#define IRQ_MB_A_USB_OC(n) (IRQ_GBUS_INT(28) + (n)) +#define IRQ_MB_A_USB_OC_NUM 2 +#define IRQ_MB_A_PCMCIA_OC IRQ_GBUS_INT(30) + + +/* Mother-A PCI bus support. */ +#include <asm/rte_mb_a_pci.h> + +/* These are the base addresses used for allocating device address + space. 512K of the motherboard SRAM is in the same space, so we have + to be careful not to let it be allocated. */ +#define PCIBIOS_MIN_MEM (MB_A_PCI_MEM_ADDR + 0x80000) +#define PCIBIOS_MIN_IO MB_A_PCI_IO_ADDR + +/* As we don't really support PCI DMA to cpu memory, and use bounce-buffers + instead, perversely enough, this becomes always true! */ +#define pci_dma_supported(dev, mask) 1 +#define pci_dac_dma_supported(dev, mask) 0 +#define pci_controller_num(dev) 0 +#define pcibios_assign_all_busses() 1 + + + +/* For <asm/param.h> */ +#ifndef HZ +#define HZ 100 +#endif + + +#ifndef __ASSEMBLY__ + +extern void rte_cb_init_irqs (void); + +#endif /* !__ASSEMBLY__ */ + + +#endif /* __V850_RTE_CB_H__ */ diff --git a/include/asm-v850/rte_ma1_cb.h b/include/asm-v850/rte_ma1_cb.h new file mode 100644 index 000000000000..7eda15fafe36 --- /dev/null +++ b/include/asm-v850/rte_ma1_cb.h @@ -0,0 +1,112 @@ +/* + * include/asm-v850/rte_ma1_cb.h -- Midas labs RTE-V850/MA1-CB board + * + * Copyright (C) 2001,02 NEC Corporation + * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_RTE_MA1_CB_H__ +#define __V850_RTE_MA1_CB_H__ + +#include <asm/rte_cb.h> /* Common defs for Midas RTE-CB boards. */ + + +/* The GBUS GINT0 - GINT4 interrupts are connected to the INTP000 - INTP011 + pins on the CPU. These are shared among the GBUS interrupts. */ +#define IRQ_GINT(n) IRQ_INTP(n) +#define IRQ_GINT_NUM 4 + + +#define PLATFORM "rte-v850e/ma1-cb" +#define PLATFORM_LONG "Midas lab RTE-V850E/MA1-CB" + +#define CPU_CLOCK_FREQ 50000000 /* 50MHz */ + +/* 1MB of onboard SRAM. Note that the monitor ROM uses parts of this + for its own purposes, so care must be taken. Some address lines are + not decoded, so the SRAM area is mirrored every 1MB from 0x400000 to + 0x800000 (exclusive). */ +#define SRAM_ADDR 0x00400000 +#define SRAM_SIZE 0x00100000 /* 1MB */ + +/* 32MB of onbard SDRAM. */ +#define SDRAM_ADDR 0x00800000 +#define SDRAM_SIZE 0x02000000 /* 32MB */ + + +/* For <asm/page.h> */ +#define PAGE_OFFSET SRAM_ADDR + + +#ifdef CONFIG_ROM_KERNEL +/* Kernel is in ROM, starting at address 0. */ + +#define INTV_BASE 0 + +#else /* !CONFIG_ROM_KERNEL */ + +#ifdef CONFIG_RTE_CB_MULTI +/* Using RAM kernel with ROM monitor for Multi debugger. */ + +/* The chip's real interrupt vectors are in ROM, but they jump to a + secondary interrupt vector table in RAM. */ +#define INTV_BASE 0x004F8000 + +/* Scratch memory used by the ROM monitor, which shouldn't be used by + linux (except for the alternate interrupt vector area, defined + above). */ +#define MON_SCRATCH_ADDR 0x004F8000 +#define MON_SCRATCH_SIZE 0x00008000 /* 32KB */ + +#else /* !CONFIG_RTE_CB_MULTI */ +/* Using RAM-kernel. Assume some sort of boot-loader got us loaded at + address 0. */ + +#define INTV_BASE 0 + +#endif /* CONFIG_RTE_CB_MULTI */ + +#endif /* CONFIG_ROM_KERNEL */ + + +/* Some misc. on-board devices. */ + +/* Seven-segment LED display (two digits). Write-only. */ +#define LED_ADDR(n) (0x07802000 + (n)) +#define LED(n) (*(volatile unsigned char *)LED_ADDR(n)) +#define LED_NUM_DIGITS 2 + + +/* Override the basic MA uart pre-initialization so that we can + initialize extra stuff. */ +#undef NB85E_UART_PRE_CONFIGURE /* should be defined by <asm/ma.h> */ +#define NB85E_UART_PRE_CONFIGURE rte_ma1_cb_uart_pre_configure +#ifndef __ASSEMBLY__ +extern void rte_ma1_cb_uart_pre_configure (unsigned chan, + unsigned cflags, unsigned baud); +#endif + +/* This board supports RTS/CTS for the on-chip UART, but only for channel 0. */ + +/* CTS for UART channel 0 is pin P43 (bit 3 of port 4). */ +#define NB85E_UART_CTS(chan) ((chan) == 0 ? !(MA_PORT4_IO & 0x8) : 1) +/* RTS for UART channel 0 is pin P42 (bit 2 of port 4). */ +#define NB85E_UART_SET_RTS(chan, val) \ + do { \ + if (chan == 0) { \ + unsigned old = MA_PORT4_IO; \ + if (val) \ + MA_PORT4_IO = old & ~0x4; \ + else \ + MA_PORT4_IO = old | 0x4; \ + } \ + } while (0) + + +#endif /* __V850_RTE_MA1_CB_H__ */ diff --git a/include/asm-v850/rte_mb_a_pci.h b/include/asm-v850/rte_mb_a_pci.h new file mode 100644 index 000000000000..41ac185ca9cd --- /dev/null +++ b/include/asm-v850/rte_mb_a_pci.h @@ -0,0 +1,56 @@ +/* + * include/asm-v850/mb_a_pci.h -- PCI support for Midas lab RTE-MOTHER-A board + * + * Copyright (C) 2001 NEC Corporation + * Copyright (C) 2001 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_MB_A_PCI_H__ +#define __V850_MB_A_PCI_H__ + + +#define MB_A_PCI_MEM_ADDR GCS5_ADDR +#define MB_A_PCI_MEM_SIZE (GCS5_SIZE / 2) +#define MB_A_PCI_IO_ADDR (GCS5_ADDR + MB_A_PCI_MEM_SIZE) +#define MB_A_PCI_IO_SIZE (GCS5_SIZE / 2) +#define MB_A_PCI_REG_BASE_ADDR GCS6_ADDR + +#define MB_A_PCI_PCICR_ADDR (MB_A_PCI_REG_BASE_ADDR + 0x4) +#define MB_A_PCI_PCICR (*(volatile u16 *)MB_A_PCI_PCICR_ADDR) +#define MB_A_PCI_PCISR_ADDR (MB_A_PCI_REG_BASE_ADDR + 0x6) +#define MB_A_PCI_PCISR (*(volatile u16 *)MB_A_PCI_PCISR_ADDR) +#define MB_A_PCI_PCILTR_ADDR (MB_A_PCI_REG_BASE_ADDR + 0xD) +#define MB_A_PCI_PCILTR (*(volatile u8 *)MB_A_PCI_PCILTR_ADDR) +#define MB_A_PCI_PCIBAR0_ADDR (MB_A_PCI_REG_BASE_ADDR + 0x10) +#define MB_A_PCI_PCIBAR0 (*(volatile u32 *)MB_A_PCI_PCIBAR0_ADDR) +#define MB_A_PCI_PCIBAR1_ADDR (MB_A_PCI_REG_BASE_ADDR + 0x14) +#define MB_A_PCI_PCIBAR1 (*(volatile u32 *)MB_A_PCI_PCIBAR1_ADDR) +#define MB_A_PCI_PCIBAR2_ADDR (MB_A_PCI_REG_BASE_ADDR + 0x18) +#define MB_A_PCI_PCIBAR2 (*(volatile u32 *)MB_A_PCI_PCIBAR2_ADDR) +#define MB_A_PCI_VENDOR_ID_ADDR (MB_A_PCI_REG_BASE_ADDR + 0x2C) +#define MB_A_PCI_VENDOR_ID (*(volatile u16 *)MB_A_PCI_VENDOR_ID_ADDR) +#define MB_A_PCI_DEVICE_ID_ADDR (MB_A_PCI_REG_BASE_ADDR + 0x2E) +#define MB_A_PCI_DEVICE_ID (*(volatile u16 *)MB_A_PCI_DEVICE_ID_ADDR) +#define MB_A_PCI_DMRR_ADDR (MB_A_PCI_REG_BASE_ADDR + 0x9C) +#define MB_A_PCI_DMRR (*(volatile u32 *)MB_A_PCI_DMRR_ADDR) +#define MB_A_PCI_DMLBAM_ADDR (MB_A_PCI_REG_BASE_ADDR + 0xA0) +#define MB_A_PCI_DMLBAM (*(volatile u32 *)MB_A_PCI_DMLBAM_ADDR) +#define MB_A_PCI_DMLBAI_ADDR (MB_A_PCI_REG_BASE_ADDR + 0xA4) +#define MB_A_PCI_DMLBAI (*(volatile u32 *)MB_A_PCI_DMLBAI_ADDR) +#define MB_A_PCI_PCIPBAM_ADDR (MB_A_PCI_REG_BASE_ADDR + 0xA8) +#define MB_A_PCI_PCIPBAM (*(volatile u32 *)MB_A_PCI_PCIPBAM_ADDR) +/* `PCI Configuration Address Register for Direct Master to PCI IO/CFG' */ +#define MB_A_PCI_DMCFGA_ADDR (MB_A_PCI_REG_BASE_ADDR + 0xAC) +#define MB_A_PCI_DMCFGA (*(volatile u32 *)MB_A_PCI_DMCFGA_ADDR) +/* `PCI Permanent Configuration ID Register' */ +#define MB_A_PCI_PCIHIDR_ADDR (MB_A_PCI_REG_BASE_ADDR + 0xF0) +#define MB_A_PCI_PCIHIDR (*(volatile u32 *)MB_A_PCI_PCIHIDR_ADDR) + + +#endif /* __V850_MB_A_PCI_H__ */ diff --git a/include/asm-v850/rte_nb85e_cb.h b/include/asm-v850/rte_nb85e_cb.h new file mode 100644 index 000000000000..f9f677a80f3a --- /dev/null +++ b/include/asm-v850/rte_nb85e_cb.h @@ -0,0 +1,63 @@ +/* + * include/asm-v850/rte_nb85e_cb.h -- Midas labs RTE-V850/NB85E-CB board + * + * Copyright (C) 2001,02 NEC Corporation + * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_RTE_NB85E_CB_H__ +#define __V850_RTE_NB85E_CB_H__ + +#include <asm/rte_cb.h> /* Common defs for Midas RTE-CB boards. */ + +#define PLATFORM "rte-v850e/nb85e-cb" +#define PLATFORM_LONG "Midas lab RTE-V850E/NB85E-CB" + +#define CPU_CLOCK_FREQ 50000000 /* 50MHz */ + +/* 1MB of onboard SRAM. Note that the monitor ROM uses parts of this + for its own purposes, so care must be taken. */ +#define SRAM_ADDR 0x03C00000 +#define SRAM_SIZE 0x00100000 /* 1MB */ + +/* 16MB of onbard SDRAM. */ +#define SDRAM_ADDR 0x01000000 +#define SDRAM_SIZE 0x01000000 /* 16MB */ + + +#ifdef CONFIG_ROM_KERNEL +/* Kernel is in ROM, starting at address 0. */ + +#define INTV_BASE 0 + +#else /* !CONFIG_ROM_KERNEL */ +/* We're using the ROM monitor. */ + +/* The chip's real interrupt vectors are in ROM, but they jump to a + secondary interrupt vector table in RAM. */ +#define INTV_BASE 0x004F8000 + +/* Scratch memory used by the ROM monitor, which shouldn't be used by + linux (except for the alternate interrupt vector area, defined + above). */ +#define MON_SCRATCH_ADDR 0x03CE8000 +#define MON_SCRATCH_SIZE 0x00008000 /* 32KB */ + +#endif /* CONFIG_ROM_KERNEL */ + + +/* Some misc. on-board devices. */ + +/* Seven-segment LED display (two digits). Write-only. */ +#define LED_ADDR(n) (0x03802000 + (n)) +#define LED(n) (*(volatile unsigned char *)LED_ADDR(n)) +#define LED_NUM_DIGITS 4 + + +#endif /* __V850_RTE_NB85E_CB_H__ */ diff --git a/include/asm-v850/scatterlist.h b/include/asm-v850/scatterlist.h new file mode 100644 index 000000000000..af1cba69a526 --- /dev/null +++ b/include/asm-v850/scatterlist.h @@ -0,0 +1,26 @@ +/* + * include/asm-v850/scatterlist.h + * + * Copyright (C) 2001,02 NEC Corporation + * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_SCATTERLIST_H__ +#define __V850_SCATTERLIST_H__ + +struct scatterlist { + struct page *page; + unsigned offset; + dma_addr_t dma_address; + unsigned length; +}; + +#define ISA_DMA_THRESHOLD (~0UL) + +#endif /* __V850_SCATTERLIST_H__ */ diff --git a/include/asm-v850/segment.h b/include/asm-v850/segment.h new file mode 100644 index 000000000000..5e2b15dcf3d9 --- /dev/null +++ b/include/asm-v850/segment.h @@ -0,0 +1,36 @@ +#ifndef __V850_SEGMENT_H__ +#define __V850_SEGMENT_H__ + + +#ifndef __ASSEMBLY__ + +typedef unsigned long mm_segment_t; /* domain register */ + +#endif /* !__ASSEMBLY__ */ + + +#define __KERNEL_CS 0x0 +#define __KERNEL_DS 0x0 + +#define __USER_CS 0x1 +#define __USER_DS 0x1 + +#define KERNEL_DS __KERNEL_DS +#define KERNEL_CS __KERNEL_CS +#define USER_DS __USER_DS +#define USER_CS __USER_CS + +#define segment_eq(a,b) ((a) == (b)) + +#define get_ds() (KERNEL_DS) +#define get_fs() (USER_DS) + +#define set_fs(seg) ((void)(seg)) + + +#define copy_segments(task, mm) ((void)((void)(task), (mm))) +#define release_segments(mm) ((void)(mm)) +#define forget_segments() ((void)0) + + +#endif /* __V850_SEGMENT_H__ */ diff --git a/include/asm-v850/semaphore.h b/include/asm-v850/semaphore.h new file mode 100644 index 000000000000..0d6560f3ba98 --- /dev/null +++ b/include/asm-v850/semaphore.h @@ -0,0 +1,86 @@ +#ifndef __V850_SEMAPHORE_H__ +#define __V850_SEMAPHORE_H__ + +#include <linux/linkage.h> +#include <linux/spinlock.h> +#include <linux/wait.h> +#include <linux/rwsem.h> + +#include <asm/atomic.h> + +struct semaphore { + atomic_t count; + int sleepers; + wait_queue_head_t wait; +}; + +#define __SEMAPHORE_INITIALIZER(name,count) \ + { ATOMIC_INIT (count), 0, \ + __WAIT_QUEUE_HEAD_INITIALIZER ((name).wait) } + +#define __MUTEX_INITIALIZER(name) \ + __SEMAPHORE_INITIALIZER (name,1) + +#define __DECLARE_SEMAPHORE_GENERIC(name,count) \ + struct semaphore name = __SEMAPHORE_INITIALIZER (name,count) + +#define DECLARE_MUTEX(name) __DECLARE_SEMAPHORE_GENERIC (name,1) +#define DECLARE_MUTEX_LOCKED(name) __DECLARE_SEMAPHORE_GENERIC (name,0) + +extern inline void sema_init (struct semaphore *sem, int val) +{ + *sem = (struct semaphore)__SEMAPHORE_INITIALIZER((*sem),val); +} + +static inline void init_MUTEX (struct semaphore *sem) +{ + sema_init (sem, 1); +} + +static inline void init_MUTEX_LOCKED (struct semaphore *sem) +{ + sema_init (sem, 0); +} + +/* + * special register calling convention + */ +asmlinkage void __down_failed (void); +asmlinkage int __down_interruptible_failed (void); +asmlinkage int __down_trylock_failed (void); +asmlinkage void __up_wakeup (void); + +extern void __down (struct semaphore * sem); +extern int __down_interruptible (struct semaphore * sem); +extern int __down_trylock (struct semaphore * sem); +extern void __up (struct semaphore * sem); + +extern inline void down (struct semaphore * sem) +{ + if (atomic_dec_return (&sem->count) < 0) + __down (sem); +} + +extern inline int down_interruptible (struct semaphore * sem) +{ + int ret = 0; + if (atomic_dec_return (&sem->count) < 0) + ret = __down_interruptible (sem); + return ret; +} + +extern inline int down_trylock (struct semaphore *sem) +{ + int ret = 0; + if (atomic_dec_return (&sem->count) < 0) + ret = __down_trylock (sem); + return ret; +} + +extern inline void up (struct semaphore * sem) +{ + if (atomic_inc_return (&sem->count) <= 0) + __up (sem); +} + +#endif /* __V850_SEMAPHORE_H__ */ diff --git a/include/asm-v850/sembuf.h b/include/asm-v850/sembuf.h new file mode 100644 index 000000000000..1622231a8b85 --- /dev/null +++ b/include/asm-v850/sembuf.h @@ -0,0 +1,25 @@ +#ifndef __V850_SEMBUF_H__ +#define __V850_SEMBUF_H__ + +/* + * The semid64_ds structure for v850 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct semid64_ds { + struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ + __kernel_time_t sem_otime; /* last semop time */ + unsigned long __unused1; + __kernel_time_t sem_ctime; /* last change time */ + unsigned long __unused2; + unsigned long sem_nsems; /* no. of semaphores in array */ + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* __V850_SEMBUF_H__ */ diff --git a/include/asm-v850/setup.h b/include/asm-v850/setup.h new file mode 100644 index 000000000000..9dff7e51546d --- /dev/null +++ b/include/asm-v850/setup.h @@ -0,0 +1,37 @@ +/* + * include/asm-v850/setup.h + * + * Copyright (C) 2001 NEC Corporation + * Copyright (C) 2001 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_SETUP_H__ +#define __V850_SETUP_H__ + +/* Linux/v850 platforms. This corresponds roughly to what the outside + the CPU looks like. */ +#define MACH_SIM 1 /* GDB architectural simulator */ + +/* v850 cpu architectures. This is what a user-program would be + concerned with. */ +#define CPU_ARCH_V850E 1 +#define CPU_ARCH_V850E2 2 + +/* v850 cpu `cores'. These are system-level extensions to the basic CPU, + defining such things as interrupt-handling. */ +#define CPU_CORE_NB85E 1 +#define CPU_CORE_NB85ET 2 +#define CPU_CORE_NU85E 3 +#define CPU_CORE_NU85ET 4 + +/* Specific v850 cpu chips. These each incorporate a `core', and add + varions peripheral services. */ +#define CPU_CHIP_MA1 1 + +#endif /* __V850_SETUP_H__ */ diff --git a/include/asm-v850/shmbuf.h b/include/asm-v850/shmbuf.h new file mode 100644 index 000000000000..3d085c9c418e --- /dev/null +++ b/include/asm-v850/shmbuf.h @@ -0,0 +1,42 @@ +#ifndef __V850_SHMBUF_H__ +#define __V850_SHMBUF_H__ + +/* + * The shmid64_ds structure for v850 architecture. + * Note extra padding because this structure is passed back and forth + * between kernel and user space. + * + * Pad space is left for: + * - 64-bit time_t to solve y2038 problem + * - 2 miscellaneous 32-bit values + */ + +struct shmid64_ds { + struct ipc64_perm shm_perm; /* operation perms */ + size_t shm_segsz; /* size of segment (bytes) */ + __kernel_time_t shm_atime; /* last attach time */ + unsigned long __unused1; + __kernel_time_t shm_dtime; /* last detach time */ + unsigned long __unused2; + __kernel_time_t shm_ctime; /* last change time */ + unsigned long __unused3; + __kernel_pid_t shm_cpid; /* pid of creator */ + __kernel_pid_t shm_lpid; /* pid of last operator */ + unsigned long shm_nattch; /* no. of current attaches */ + unsigned long __unused4; + unsigned long __unused5; +}; + +struct shminfo64 { + unsigned long shmmax; + unsigned long shmmin; + unsigned long shmmni; + unsigned long shmseg; + unsigned long shmall; + unsigned long __unused1; + unsigned long __unused2; + unsigned long __unused3; + unsigned long __unused4; +}; + +#endif /* __V850_SHMBUF_H__ */ diff --git a/include/asm-v850/shmparam.h b/include/asm-v850/shmparam.h new file mode 100644 index 000000000000..7dcb6739073e --- /dev/null +++ b/include/asm-v850/shmparam.h @@ -0,0 +1,6 @@ +#ifndef __V850_SHMPARAM_H__ +#define __V850_SHMPARAM_H__ + +#define SHMLBA PAGE_SIZE /* attach addr a multiple of this */ + +#endif /* __V850_SHMPARAM_H__ */ diff --git a/include/asm-v850/sigcontext.h b/include/asm-v850/sigcontext.h new file mode 100644 index 000000000000..e0890f6f4bc9 --- /dev/null +++ b/include/asm-v850/sigcontext.h @@ -0,0 +1,25 @@ +/* + * include/asm-v850/sigcontext.h -- Signal contexts + * + * Copyright (C) 2001 NEC Corporation + * Copyright (C) 2001 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_SIGCONTEXT_H__ +#define __V850_SIGCONTEXT_H__ + +#include <asm/ptrace.h> + +struct sigcontext +{ + struct pt_regs regs; + unsigned long oldmask; +}; + +#endif /* __V850_SIGCONTEXT_H__ */ diff --git a/include/asm-v850/siginfo.h b/include/asm-v850/siginfo.h new file mode 100644 index 000000000000..7eb94703dce0 --- /dev/null +++ b/include/asm-v850/siginfo.h @@ -0,0 +1,6 @@ +#ifndef __V850_SIGINFO_H__ +#define __V850_SIGINFO_H__ + +#include <asm-generic/siginfo.h> + +#endif /* __V850_SIGINFO_H__ */ diff --git a/include/asm-v850/signal.h b/include/asm-v850/signal.h new file mode 100644 index 000000000000..6423d2adb3fe --- /dev/null +++ b/include/asm-v850/signal.h @@ -0,0 +1,193 @@ +#ifndef __V850_SIGNAL_H__ +#define __V850_SIGNAL_H__ + +#include <linux/types.h> + +/* Avoid too many header ordering problems. */ +struct siginfo; + + +#ifdef __KERNEL__ + +/* Most things should be clean enough to redefine this at will, if care + is taken to make libc match. */ +#define _NSIG 64 +#define _NSIG_BPW 32 +#define _NSIG_WORDS (_NSIG / _NSIG_BPW) + +typedef unsigned long old_sigset_t; /* at least 32 bits */ + +typedef struct { + unsigned long sig[_NSIG_WORDS]; +} sigset_t; + +#else /* !__KERNEL__ */ + +/* Here we must cater to libcs that poke about in kernel headers. */ + +#define NSIG 32 +typedef unsigned long sigset_t; + +#endif /* __KERNEL__ */ + + +#define SIGHUP 1 +#define SIGINT 2 +#define SIGQUIT 3 +#define SIGILL 4 +#define SIGTRAP 5 +#define SIGABRT 6 +#define SIGIOT 6 +#define SIGBUS 7 +#define SIGFPE 8 +#define SIGKILL 9 +#define SIGUSR1 10 +#define SIGSEGV 11 +#define SIGUSR2 12 +#define SIGPIPE 13 +#define SIGALRM 14 +#define SIGTERM 15 +#define SIGSTKFLT 16 +#define SIGCHLD 17 +#define SIGCONT 18 +#define SIGSTOP 19 +#define SIGTSTP 20 +#define SIGTTIN 21 +#define SIGTTOU 22 +#define SIGURG 23 +#define SIGXCPU 24 +#define SIGXFSZ 25 +#define SIGVTALRM 26 +#define SIGPROF 27 +#define SIGWINCH 28 +#define SIGIO 29 +#define SIGPOLL SIGIO +/* +#define SIGLOST 29 +*/ +#define SIGPWR 30 +#define SIGSYS 31 +#define SIGUNUSED 31 + +/* These should not be considered constants from userland. */ +#define SIGRTMIN 32 +#define SIGRTMAX (_NSIG-1) + +/* + * SA_FLAGS values: + * + * SA_ONSTACK indicates that a registered stack_t will be used. + * SA_INTERRUPT is a no-op, but left due to historical reasons. Use the + * SA_RESTART flag to get restarting signals (which were the default long ago) + * SA_NOCLDSTOP flag to turn off SIGCHLD when children stop. + * SA_RESETHAND clears the handler when the signal is delivered. + * SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies. + * SA_NODEFER prevents the current signal from being masked in the handler. + * + * SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single + * Unix names RESETHAND and NODEFER respectively. + */ +#define SA_NOCLDSTOP 0x00000001 +#define SA_NOCLDWAIT 0x00000002 /* not supported yet */ +#define SA_SIGINFO 0x00000004 +#define SA_ONSTACK 0x08000000 +#define SA_RESTART 0x10000000 +#define SA_NODEFER 0x40000000 +#define SA_RESETHAND 0x80000000 + +#define SA_NOMASK SA_NODEFER +#define SA_ONESHOT SA_RESETHAND +#define SA_INTERRUPT 0x20000000 /* dummy -- ignored */ + +#define SA_RESTORER 0x04000000 + +/* + * sigaltstack controls + */ +#define SS_ONSTACK 1 +#define SS_DISABLE 2 + +#define MINSIGSTKSZ 2048 +#define SIGSTKSZ 8192 + + +#ifdef __KERNEL__ +/* + * These values of sa_flags are used only by the kernel as part of the + * irq handling routines. + * + * SA_INTERRUPT is also used by the irq handling routines. + * SA_SHIRQ is for shared interrupt support on PCI and EISA. + */ +#define SA_PROBE SA_ONESHOT +#define SA_SAMPLE_RANDOM SA_RESTART +#define SA_SHIRQ 0x04000000 +#endif /* __KERNEL__ */ + + +#define SIG_BLOCK 0 /* for blocking signals */ +#define SIG_UNBLOCK 1 /* for unblocking signals */ +#define SIG_SETMASK 2 /* for setting the signal mask */ + +/* Type of a signal handler. */ +typedef void (*__sighandler_t)(int); + +#define SIG_DFL ((__sighandler_t)0) /* default signal handling */ +#define SIG_IGN ((__sighandler_t)1) /* ignore signal */ +#define SIG_ERR ((__sighandler_t)-1) /* error return from signal */ + + +#ifdef __KERNEL__ + +struct old_sigaction { + __sighandler_t sa_handler; + old_sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +struct sigaction { + __sighandler_t sa_handler; + unsigned long sa_flags; + void (*sa_restorer)(void); + sigset_t sa_mask; /* mask last for extensibility */ +}; + +struct k_sigaction { + struct sigaction sa; +}; + +#else /* !__KERNEL__ */ + +/* Here we must cater to libcs that poke about in kernel headers. */ + +struct sigaction { + union { + __sighandler_t _sa_handler; + void (*_sa_sigaction)(int, struct siginfo *, void *); + } _u; + sigset_t sa_mask; + unsigned long sa_flags; + void (*sa_restorer)(void); +}; + +#define sa_handler _u._sa_handler +#define sa_sigaction _u._sa_sigaction + +#endif /* __KERNEL__ */ + + +typedef struct sigaltstack { + void *ss_sp; + int ss_flags; + size_t ss_size; +} stack_t; + +#ifdef __KERNEL__ + +#include <asm/sigcontext.h> +#undef __HAVE_ARCH_SIG_BITOPS + +#endif /* __KERNEL__ */ + +#endif /* __V850_SIGNAL_H__ */ diff --git a/include/asm-v850/sim.h b/include/asm-v850/sim.h new file mode 100644 index 000000000000..fc679447c519 --- /dev/null +++ b/include/asm-v850/sim.h @@ -0,0 +1,49 @@ +/* + * include/asm-v850/sim.h -- Machine-dependent defs for GDB v850e simulator + * + * Copyright (C) 2001,02 NEC Corporation + * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_SIM_H__ +#define __V850_SIM_H__ + + +#define CPU_ARCH "v850e" +#define CPU_MODEL "GDB/v850e simulator" + + +/* We use a wierd value for RAM, not just 0, for testing purposes. + These must match the values used in the linker script. */ +#define RAM_ADDR 0x8F000000 +#define RAM_SIZE 0x01000000 + + +/* For <asm/page.h> */ +#define PAGE_OFFSET RAM_ADDR + + +/* For <asm/entry.h> */ +/* `R0 RAM', used for a few miscellaneous variables that must be + accessible using a load instruction relative to R0. On real + processors, this usually is on-chip RAM, but here we just + choose an arbitrary address that meets the above constraint. */ +#define R0_RAM_ADDR 0xFFFFF000 + + +/* For <asm/param.h> */ +#ifndef HZ +#define HZ 24 /* Minimum supported frequency. */ +#endif + +/* For <asm/irq.h> */ +#define NUM_CPU_IRQS 6 + + +#endif /* __V850_SIM_H__ */ diff --git a/include/asm-v850/sim85e2c.h b/include/asm-v850/sim85e2c.h new file mode 100644 index 000000000000..243537feffdc --- /dev/null +++ b/include/asm-v850/sim85e2c.h @@ -0,0 +1,89 @@ +/* + * include/asm-v850/sim85e2c.h -- Machine-dependent defs for + * V850E2 RTL simulator + * + * Copyright (C) 2002 NEC Corporation + * Copyright (C) 2002 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_SIM85E2C_H__ +#define __V850_SIM85E2C_H__ + + +#define CPU_ARCH "v850e2" +#define CPU_MODEL "sim85e2c simulator" + + +/* Various memory areas supported by the simulator. + These should match the corresponding definitions in the linker script. */ + +/* `instruction RAM'; instruction fetches are much faster from IRAM than + from DRAM. */ +#define IRAM_ADDR 0 +#define IRAM_SIZE 0x00100000 /* 1MB */ +/* `data RAM', below and contiguous with the I/O space. + Data fetches are much faster from DRAM than from IRAM. */ +#define DRAM_ADDR 0xfff00000 +#define DRAM_SIZE 0x000ff000 /* 1020KB */ +/* `external ram'. Unlike the above RAM areas, this memory is cached, + so both instruction and data fetches should be (mostly) fast -- + however, currently only write-through caching is supported, so writes + to ERAM will be slow. */ +#define ERAM_ADDR 0x00100000 +#define ERAM_SIZE 0x07f00000 /* 127MB (max) */ + + +/* CPU core control registers; these should be expanded and moved into + separate header files when we support some other processors based on + the same E2 core. */ +/* Bus Transaction Control Register */ +#define NA85E2C_CACHE_BTSC_ADDR 0xfffff070 +#define NA85E2C_CACHE_BTSC (*(volatile unsigned short *)NA85E2C_CACHE_BTSC_ADDR) +#define NA85E2C_CACHE_BTSC_ICM 0x1 /* icache enable */ +#define NA85E2C_CACHE_BTSC_DCM0 0x4 /* dcache enable, bit 0 */ +#define NA85E2C_CACHE_BTSC_DCM1 0x8 /* dcache enable, bit 1 */ +/* Cache Configuration Register */ +#define NA85E2C_BUSM_BHC_ADDR 0xfffff06a +#define NA85E2C_BUSM_BHC (*(volatile unsigned short *)NA85E2C_BUSM_BHC_ADDR) + +/* Simulator specific control registers. */ +/* NOTHAL controls whether the simulator will stop at a `halt' insn. */ +#define NOTHAL_ADDR 0xffffff22 +#define NOTHAL (*(volatile unsigned char *)NOTHAL_ADDR) +/* The simulator will stop N cycles after N is written to SIMFIN. */ +#define SIMFIN_ADDR 0xffffff24 +#define SIMFIN (*(volatile unsigned short *)SIMFIN_ADDR) + + +/* The simulator has an nb85e-style interrupt system. */ +#include <asm/nb85e_intc.h> + +/* For <asm/irq.h> */ +#define NUM_CPU_IRQS 64 + + +/* For <asm/page.h> */ +#define PAGE_OFFSET DRAM_ADDR + + +/* For <asm/entry.h> */ +/* `R0 RAM', used for a few miscellaneous variables that must be accessible + using a load instruction relative to R0. The sim85e2c simulator + actually puts 1020K of RAM from FFF00000 to FFFFF000, so we arbitarily + choose a small portion at the end of that. */ +#define R0_RAM_ADDR 0xFFFFE000 + + +/* For <asm/param.h> */ +#ifndef HZ +#define HZ 24 /* Minimum supported frequency. */ +#endif + + +#endif /* __V850_SIM85E2C_H__ */ diff --git a/include/asm-v850/simsyscall.h b/include/asm-v850/simsyscall.h new file mode 100644 index 000000000000..4a19d5ae9d17 --- /dev/null +++ b/include/asm-v850/simsyscall.h @@ -0,0 +1,99 @@ +/* + * include/asm-v850/simsyscall.h -- `System calls' under the v850e emulator + * + * Copyright (C) 2001 NEC Corporation + * Copyright (C) 2001 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_SIMSYSCALL_H__ +#define __V850_SIMSYSCALL_H__ + +#define V850_SIM_SYS_exit(a...) V850_SIM_SYSCALL_1 (1 , ##a) +#define V850_SIM_SYS_fork(a...) V850_SIM_SYSCALL_0 (2 , ##a) +#define V850_SIM_SYS_read(a...) V850_SIM_SYSCALL_3 (3 , ##a) +#define V850_SIM_SYS_write(a...) V850_SIM_SYSCALL_3 (4 , ##a) +#define V850_SIM_SYS_open(a...) V850_SIM_SYSCALL_2 (5 , ##a) +#define V850_SIM_SYS_close(a...) V850_SIM_SYSCALL_1 (6 , ##a) +#define V850_SIM_SYS_wait4(a...) V850_SIM_SYSCALL_4 (7 , ##a) +/* #define V850_SIM_SYS_creat(a...) V850_SIM_SYSCALL_1 (8 , ##a) */ +/* #define V850_SIM_SYS_link(a...) V850_SIM_SYSCALL_1 (9 , ##a) */ +/* #define V850_SIM_SYS_unlink(a...) V850_SIM_SYSCALL_1 (10 , ##a) */ +#define V850_SIM_SYS_execv(a...) V850_SIM_SYSCALL_2 (11 , ##a) +/* #define V850_SIM_SYS_chdir(a...) V850_SIM_SYSCALL_1 (12 , ##a) */ +/* #define V850_SIM_SYS_mknod(a...) V850_SIM_SYSCALL_1 (14 , ##a) */ +#define V850_SIM_SYS_chmod(a...) V850_SIM_SYSCALL_2 (15 , ##a) +#define V850_SIM_SYS_chown(a...) V850_SIM_SYSCALL_2 (16 , ##a) +#define V850_SIM_SYS_lseek(a...) V850_SIM_SYSCALL_3 (19 , ##a) +/* #define V850_SIM_SYS_getpid(a...) V850_SIM_SYSCALL_1 (20 , ##a) */ +/* #define V850_SIM_SYS_isatty(a...) V850_SIM_SYSCALL_1 (21 , ##a) */ +/* #define V850_SIM_SYS_fstat(a...) V850_SIM_SYSCALL_1 (22 , ##a) */ +#define V850_SIM_SYS_time(a...) V850_SIM_SYSCALL_1 (23 , ##a) +#define V850_SIM_SYS_poll(a...) V850_SIM_SYSCALL_3 (24 , ##a) +#define V850_SIM_SYS_stat(a...) V850_SIM_SYSCALL_2 (38 , ##a) +#define V850_SIM_SYS_pipe(a...) V850_SIM_SYSCALL_1 (42 , ##a) +#define V850_SIM_SYS_times(a...) V850_SIM_SYSCALL_1 (43 , ##a) +#define V850_SIM_SYS_execve(a...) V850_SIM_SYSCALL_3 (59 , ##a) +#define V850_SIM_SYS_gettimeofday(a...) V850_SIM_SYSCALL_2 (116 , ##a) +/* #define V850_SIM_SYS_utime(a...) V850_SIM_SYSCALL_2 (201 , ##a) */ +/* #define V850_SIM_SYS_wait(a...) V850_SIM_SYSCALL_1 (202 , ##a) */ + +#define V850_SIM_SYS_make_raw(a...) V850_SIM_SYSCALL_1 (1024 , ##a) + + +#define V850_SIM_SYSCALL_0(_call) \ +({ \ + register int call __asm__ ("r6") = _call; \ + register int rval __asm__ ("r10"); \ + __asm__ __volatile__ ("trap 31" \ + : "=r" (rval) \ + : "r" (call) \ + : "r11", "memory"); \ + rval; \ +}) +#define V850_SIM_SYSCALL_1(_call, _arg0) \ +({ \ + register int call __asm__ ("r6") = _call; \ + register long arg0 __asm__ ("r7") = (long)_arg0; \ + register int rval __asm__ ("r10"); \ + __asm__ __volatile__ ("trap 31" \ + : "=r" (rval) \ + : "r" (call), "r" (arg0) \ + : "r11", "memory"); \ + rval; \ +}) +#define V850_SIM_SYSCALL_2(_call, _arg0, _arg1) \ +({ \ + register int call __asm__ ("r6") = _call; \ + register long arg0 __asm__ ("r7") = (long)_arg0; \ + register long arg1 __asm__ ("r8") = (long)_arg1; \ + register int rval __asm__ ("r10"); \ + __asm__ __volatile__ ("trap 31" \ + : "=r" (rval) \ + : "r" (call), "r" (arg0), "r" (arg1) \ + : "r11", "memory"); \ + rval; \ +}) +#define V850_SIM_SYSCALL_3(_call, _arg0, _arg1, _arg2) \ +({ \ + register int call __asm__ ("r6") = _call; \ + register long arg0 __asm__ ("r7") = (long)_arg0; \ + register long arg1 __asm__ ("r8") = (long)_arg1; \ + register long arg2 __asm__ ("r9") = (long)_arg2; \ + register int rval __asm__ ("r10"); \ + __asm__ __volatile__ ("trap 31" \ + : "=r" (rval) \ + : "r" (call), "r" (arg0), "r" (arg1), "r" (arg2)\ + : "r11", "memory"); \ + rval; \ +}) + +#define V850_SIM_SYSCALL(call, args...) \ + V850_SIM_SYS_##call (args) + +#endif /* __V850_SIMSYSCALL_H__ */ diff --git a/include/asm-v850/socket.h b/include/asm-v850/socket.h new file mode 100644 index 000000000000..d1dddefa9eaa --- /dev/null +++ b/include/asm-v850/socket.h @@ -0,0 +1,64 @@ +#ifndef __V850_SOCKET_H__ +#define __V850_SOCKET_H__ + +#include <asm/sockios.h> + +/* For setsockoptions(2) */ +#define SOL_SOCKET 1 + +#define SO_DEBUG 1 +#define SO_REUSEADDR 2 +#define SO_TYPE 3 +#define SO_ERROR 4 +#define SO_DONTROUTE 5 +#define SO_BROADCAST 6 +#define SO_SNDBUF 7 +#define SO_RCVBUF 8 +#define SO_KEEPALIVE 9 +#define SO_OOBINLINE 10 +#define SO_NO_CHECK 11 +#define SO_PRIORITY 12 +#define SO_LINGER 13 +#define SO_BSDCOMPAT 14 +/* To add :#define SO_REUSEPORT 15 */ +#define SO_PASSCRED 16 +#define SO_PEERCRED 17 +#define SO_RCVLOWAT 18 +#define SO_SNDLOWAT 19 +#define SO_RCVTIMEO 20 +#define SO_SNDTIMEO 21 + +/* Security levels - as per NRL IPv6 - don't actually do anything */ +#define SO_SECURITY_AUTHENTICATION 22 +#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 +#define SO_SECURITY_ENCRYPTION_NETWORK 24 + +#define SO_BINDTODEVICE 25 + +/* Socket filtering */ +#define SO_ATTACH_FILTER 26 +#define SO_DETACH_FILTER 27 + +#define SO_PEERNAME 28 +#define SO_TIMESTAMP 29 +#define SCM_TIMESTAMP SO_TIMESTAMP + +#define SO_ACCEPTCONN 30 + +/* Nast libc5 fixup - bletch */ +#if defined(__KERNEL__) +/* Socket types. */ +#define SOCK_STREAM 1 /* stream (connection) socket */ +#define SOCK_DGRAM 2 /* datagram (conn.less) socket */ +#define SOCK_RAW 3 /* raw socket */ +#define SOCK_RDM 4 /* reliably-delivered message */ +#define SOCK_SEQPACKET 5 /* sequential packet socket */ +#define SOCK_PACKET 10 /* linux specific way of */ + /* getting packets at the dev */ + /* level. For writing rarp and */ + /* other similar things on the */ + /* user level. */ +#define SOCK_MAX (SOCK_PACKET+1) +#endif + +#endif /* __V850_SOCKET_H__ */ diff --git a/include/asm-v850/sockios.h b/include/asm-v850/sockios.h new file mode 100644 index 000000000000..cf4874c2fd8a --- /dev/null +++ b/include/asm-v850/sockios.h @@ -0,0 +1,12 @@ +#ifndef __V850_SOCKIOS_H__ +#define __V850_SOCKIOS_H__ + +/* Socket-level I/O control calls. */ +#define FIOSETOWN 0x8901 +#define SIOCSPGRP 0x8902 +#define FIOGETOWN 0x8903 +#define SIOCGPGRP 0x8904 +#define SIOCATMARK 0x8905 +#define SIOCGSTAMP 0x8906 /* Get stamp */ + +#endif /* __V850_SOCKIOS_H__ */ diff --git a/include/asm-v850/softirq.h b/include/asm-v850/softirq.h new file mode 100644 index 000000000000..6d514c7ab8da --- /dev/null +++ b/include/asm-v850/softirq.h @@ -0,0 +1,20 @@ +#ifndef __V850_SOFTIRQ_H__ +#define __V850_SOFTIRQ_H__ + +#include <linux/preempt.h> +#include <asm/hardirq.h> + +#define local_bh_disable() \ + do { preempt_count() += SOFTIRQ_OFFSET; barrier(); } while (0) +#define __local_bh_enable() \ + do { barrier(); preempt_count() -= SOFTIRQ_OFFSET; } while (0) + +#define local_bh_enable() \ +do { \ + __local_bh_enable(); \ + if (unlikely(!in_interrupt() && softirq_pending(smp_processor_id()))) \ + do_softirq(); \ + preempt_check_resched(); \ +} while (0) + +#endif /* __V850_SOFTIRQ_H__ */ diff --git a/include/asm-v850/stat.h b/include/asm-v850/stat.h new file mode 100644 index 000000000000..d13c7933ed5c --- /dev/null +++ b/include/asm-v850/stat.h @@ -0,0 +1,60 @@ +#ifndef __V850_STAT_H__ +#define __V850_STAT_H__ + +struct stat { + __kernel_dev_t st_dev; + __kernel_ino_t st_ino; + __kernel_mode_t st_mode; + __kernel_nlink_t st_nlink; + __kernel_uid_t st_uid; + __kernel_gid_t st_gid; + __kernel_dev_t st_rdev; + __kernel_off_t st_size; + unsigned long st_blksize; + unsigned long st_blocks; + unsigned long st_atime; + unsigned long __unused1; + unsigned long st_mtime; + unsigned long __unused2; + unsigned long st_ctime; + unsigned long __unused3; + unsigned long __unused4; + unsigned long __unused5; +}; + +struct stat64 { + __kernel_dev_t st_dev; + unsigned long __unused0; + unsigned long __unused1; + + __kernel_ino64_t st_ino; + + __kernel_mode_t st_mode; + __kernel_nlink_t st_nlink; + + __kernel_uid_t st_uid; + __kernel_gid_t st_gid; + + __kernel_dev_t st_rdev; + unsigned long __unused2; + unsigned long __unused3; + + __kernel_loff_t st_size; + unsigned long st_blksize; + + unsigned long st_blocks; /* No. of 512-byte blocks allocated */ + unsigned long __unused4; /* future possible st_blocks high bits */ + + unsigned long st_atime; + unsigned long __unused5; + + unsigned long st_mtime; + unsigned long __unused6; + + unsigned long st_ctime; + unsigned long __unused7; /* high 32 bits of ctime someday */ + + unsigned long __unused8; +}; + +#endif /* __V850_STAT_H__ */ diff --git a/include/asm-v850/statfs.h b/include/asm-v850/statfs.h new file mode 100644 index 000000000000..68f0d38b8eb0 --- /dev/null +++ b/include/asm-v850/statfs.h @@ -0,0 +1,25 @@ +#ifndef __V850_STATFS_H__ +#define __V850_STATFS_H__ + +#ifndef __KERNEL_STRICT_NAMES + +#include <linux/types.h> + +typedef __kernel_fsid_t fsid_t; + +#endif + +struct statfs { + long f_type; + long f_bsize; + long f_blocks; + long f_bfree; + long f_bavail; + long f_files; + long f_ffree; + __kernel_fsid_t f_fsid; + long f_namelen; + long f_spare[6]; +}; + +#endif /* __V850_STATFS_H__ */ diff --git a/include/asm-v850/string.h b/include/asm-v850/string.h new file mode 100644 index 000000000000..5b3bfe016705 --- /dev/null +++ b/include/asm-v850/string.h @@ -0,0 +1,27 @@ +/* + * include/asm-v850/string.h -- Architecture specific string routines + * + * Copyright (C) 2001,02 NEC Corporation + * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_STRING_H__ +#define __V850_STRING_H__ + +#define __HAVE_ARCH_BCOPY +#define __HAVE_ARCH_MEMCPY +#define __HAVE_ARCH_MEMSET +#define __HAVE_ARCH_MEMMOVE + +extern void *memcpy (void *, const void *, __kernel_size_t); +extern void bcopy (const char *, char *, int); +extern void *memset (void *, int, __kernel_size_t); +extern void *memmove (void *, const void *, __kernel_size_t); + +#endif /* __V850_STRING_H__ */ diff --git a/include/asm-v850/system.h b/include/asm-v850/system.h new file mode 100644 index 000000000000..23b8525dd353 --- /dev/null +++ b/include/asm-v850/system.h @@ -0,0 +1,115 @@ +/* + * include/asm-v850/system.h -- Low-level interrupt/thread ops + * + * Copyright (C) 2001,02 NEC Corporation + * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_SYSTEM_H__ +#define __V850_SYSTEM_H__ + +#include <linux/linkage.h> +#include <asm/ptrace.h> + + +#define prepare_to_switch() do { } while (0) + +/* + * switch_to(n) should switch tasks to task ptr, first checking that + * ptr isn't the current task, in which case it does nothing. + */ +struct thread_struct; +extern void *switch_thread (struct thread_struct *last, + struct thread_struct *next); +#define switch_to(prev,next,last) \ + do { \ + if (prev != next) { \ + (last) = switch_thread (&prev->thread, &next->thread); \ + } \ + } while (0) + + +/* Enable/disable interrupts. */ +#define local_irq_enable() __asm__ __volatile__ ("ei") +#define local_irq_disable() __asm__ __volatile__ ("di") + +#define local_save_flags(flags) \ + __asm__ __volatile__ ("stsr %1, %0" : "=r" (flags) : "i" (SR_PSW)) +#define local_restore_flags(flags) \ + __asm__ __volatile__ ("ldsr %0, %1" :: "r" (flags), "i" (SR_PSW)) + +/* For spinlocks etc */ +#define local_irq_save(flags) \ + do { local_save_flags (flags); local_irq_disable (); } while (0) +#define local_irq_restore(flags) \ + local_restore_flags (flags); + + +static inline int irqs_disabled (void) +{ + unsigned flags; + local_save_flags (flags); + return !!(flags & 0x20); +} + + +/* + * Force strict CPU ordering. + * Not really required on v850... + */ +#define nop() __asm__ __volatile__ ("nop") +#define mb() __asm__ __volatile__ ("" ::: "memory") +#define rmb() mb () +#define wmb() mb () +#define set_rmb(var, value) do { xchg (&var, value); } while (0) +#define set_mb(var, value) set_rmb (var, value) +#define set_wmb(var, value) do { var = value; wmb (); } while (0) + +#ifdef CONFIG_SMP +#define smp_mb() mb () +#define smp_rmb() rmb () +#define smp_wmb() wmb () +#else +#define smp_mb() barrier () +#define smp_rmb() barrier () +#define smp_wmb() barrier () +#endif + +#define xchg(ptr, with) \ + ((__typeof__ (*(ptr)))__xchg ((unsigned long)(with), (ptr), sizeof (*(ptr)))) +#define tas(ptr) (xchg ((ptr), 1)) + +extern inline unsigned long __xchg (unsigned long with, + __volatile__ void *ptr, int size) +{ + unsigned long tmp, flags; + + local_irq_save (flags); + + switch (size) { + case 1: + tmp = *(unsigned char *)ptr; + *(unsigned char *)ptr = with; + break; + case 2: + tmp = *(unsigned short *)ptr; + *(unsigned short *)ptr = with; + break; + case 4: + tmp = *(unsigned long *)ptr; + *(unsigned long *)ptr = with; + break; + } + + local_irq_restore (flags); + + return tmp; +} + +#endif /* __V850_SYSTEM_H__ */ diff --git a/include/asm-v850/teg.h b/include/asm-v850/teg.h new file mode 100644 index 000000000000..7e471a65c7d0 --- /dev/null +++ b/include/asm-v850/teg.h @@ -0,0 +1,58 @@ +/* + * include/asm-v850/nb85e_teg.h -- NB85E-TEG cpu chip + * + * Copyright (C) 2001,02 NEC Corporation + * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_NB85E_TEG_H__ +#define __V850_NB85E_TEG_H__ + +/* The NB85E_TEG uses the NB85E cpu core. */ +#include <asm/nb85e.h> + +#define CHIP "v850e/nb85e-teg" +#define CHIP_LONG "NEC V850E/NB85E TEG" + +/* Hardware-specific interrupt numbers (in the kernel IRQ namespace). */ +#define IRQ_INTOV(n) (n) /* 0-3 */ +#define IRQ_INTOV_NUM 4 +#define IRQ_INTCMD(n) (0x1c + (n)) /* interval timer interrupts 0-3 */ +#define IRQ_INTCMD_NUM 4 +#define IRQ_INTDMA(n) (0x20 + (n)) /* DMA interrupts 0-3 */ +#define IRQ_INTDMA_NUM 4 +#define IRQ_INTCSI(n) (0x24 + (n)) /* CSI 0-2 transmit/receive completion */ +#define IRQ_INTCSI_NUM 3 +#define IRQ_INTSER(n) (0x25 + (n)) /* UART 0-2 reception error */ +#define IRQ_INTSER_NUM 3 +#define IRQ_INTSR(n) (0x26 + (n)) /* UART 0-2 reception completion */ +#define IRQ_INTSR_NUM 3 +#define IRQ_INTST(n) (0x27 + (n)) /* UART 0-2 transmission completion */ +#define IRQ_INTST_NUM 3 + +/* For <asm/irq.h> */ +#define NUM_MACH_IRQS 0x30 + +/* TEG UART details. */ +#define NB85E_UART_BASE_ADDR(n) (0xFFFFF600 + 0x10 * (n)) +#define NB85E_UART_ASIM_ADDR(n) (NB85E_UART_BASE_ADDR(n) + 0x0) +#define NB85E_UART_ASIS_ADDR(n) (NB85E_UART_BASE_ADDR(n) + 0x2) +#define NB85E_UART_ASIF_ADDR(n) (NB85E_UART_BASE_ADDR(n) + 0x4) +#define NB85E_UART_CKSR_ADDR(n) (NB85E_UART_BASE_ADDR(n) + 0x6) +#define NB85E_UART_BRGC_ADDR(n) (NB85E_UART_BASE_ADDR(n) + 0x8) +#define NB85E_UART_TXB_ADDR(n) (NB85E_UART_BASE_ADDR(n) + 0xA) +#define NB85E_UART_RXB_ADDR(n) (NB85E_UART_BASE_ADDR(n) + 0xC) +#define NB85E_UART_NUM_CHANNELS 1 +#define NB85E_UART_BASE_FREQ CPU_CLOCK_FREQ + +/* The TEG RTPU. */ +#define NB85E_RTPU_BASE_ADDR 0xFFFFF210 + + +#endif /* __V850_NB85E_TEG_H__ */ diff --git a/include/asm-v850/termbits.h b/include/asm-v850/termbits.h new file mode 100644 index 000000000000..f09d495c7188 --- /dev/null +++ b/include/asm-v850/termbits.h @@ -0,0 +1,174 @@ +#ifndef __V850_TERMBITS_H__ +#define __V850_TERMBITS_H__ + +#include <linux/posix_types.h> + +typedef unsigned char cc_t; +typedef unsigned int speed_t; +typedef unsigned int tcflag_t; + +#define NCCS 19 +struct termios { + tcflag_t c_iflag; /* input mode flags */ + tcflag_t c_oflag; /* output mode flags */ + tcflag_t c_cflag; /* control mode flags */ + tcflag_t c_lflag; /* local mode flags */ + cc_t c_line; /* line discipline */ + cc_t c_cc[NCCS]; /* control characters */ +}; + +/* c_cc characters */ +#define VINTR 0 +#define VQUIT 1 +#define VERASE 2 +#define VKILL 3 +#define VEOF 4 +#define VTIME 5 +#define VMIN 6 +#define VSWTC 7 +#define VSTART 8 +#define VSTOP 9 +#define VSUSP 10 +#define VEOL 11 +#define VREPRINT 12 +#define VDISCARD 13 +#define VWERASE 14 +#define VLNEXT 15 +#define VEOL2 16 + + +/* c_iflag bits */ +#define IGNBRK 0000001 +#define BRKINT 0000002 +#define IGNPAR 0000004 +#define PARMRK 0000010 +#define INPCK 0000020 +#define ISTRIP 0000040 +#define INLCR 0000100 +#define IGNCR 0000200 +#define ICRNL 0000400 +#define IUCLC 0001000 +#define IXON 0002000 +#define IXANY 0004000 +#define IXOFF 0010000 +#define IMAXBEL 0020000 + +/* c_oflag bits */ +#define OPOST 0000001 +#define OLCUC 0000002 +#define ONLCR 0000004 +#define OCRNL 0000010 +#define ONOCR 0000020 +#define ONLRET 0000040 +#define OFILL 0000100 +#define OFDEL 0000200 +#define NLDLY 0000400 +#define NL0 0000000 +#define NL1 0000400 +#define CRDLY 0003000 +#define CR0 0000000 +#define CR1 0001000 +#define CR2 0002000 +#define CR3 0003000 +#define TABDLY 0014000 +#define TAB0 0000000 +#define TAB1 0004000 +#define TAB2 0010000 +#define TAB3 0014000 +#define XTABS 0014000 +#define BSDLY 0020000 +#define BS0 0000000 +#define BS1 0020000 +#define VTDLY 0040000 +#define VT0 0000000 +#define VT1 0040000 +#define FFDLY 0100000 +#define FF0 0000000 +#define FF1 0100000 + +/* c_cflag bit meaning */ +#define CBAUD 0010017 +#define B0 0000000 /* hang up */ +#define B50 0000001 +#define B75 0000002 +#define B110 0000003 +#define B134 0000004 +#define B150 0000005 +#define B200 0000006 +#define B300 0000007 +#define B600 0000010 +#define B1200 0000011 +#define B1800 0000012 +#define B2400 0000013 +#define B4800 0000014 +#define B9600 0000015 +#define B19200 0000016 +#define B38400 0000017 +#define EXTA B19200 +#define EXTB B38400 +#define CSIZE 0000060 +#define CS5 0000000 +#define CS6 0000020 +#define CS7 0000040 +#define CS8 0000060 +#define CSTOPB 0000100 +#define CREAD 0000200 +#define PARENB 0000400 +#define PARODD 0001000 +#define HUPCL 0002000 +#define CLOCAL 0004000 +#define CBAUDEX 0010000 +#define B57600 0010001 +#define B115200 0010002 +#define B230400 0010003 +#define B460800 0010004 +#define B500000 0010005 +#define B576000 0010006 +#define B921600 0010007 +#define B1000000 0010010 +#define B1152000 0010011 +#define B1500000 0010012 +#define B2000000 0010013 +#define B2500000 0010014 +#define B3000000 0010015 +#define B3500000 0010016 +#define B4000000 0010017 +#define CIBAUD 002003600000 /* input baud rate (not used) */ +#define CMSPAR 010000000000 /* mark or space (stick) parity */ +#define CRTSCTS 020000000000 /* flow control */ + +/* c_lflag bits */ +#define ISIG 0000001 +#define ICANON 0000002 +#define XCASE 0000004 +#define ECHO 0000010 +#define ECHOE 0000020 +#define ECHOK 0000040 +#define ECHONL 0000100 +#define NOFLSH 0000200 +#define TOSTOP 0000400 +#define ECHOCTL 0001000 +#define ECHOPRT 0002000 +#define ECHOKE 0004000 +#define FLUSHO 0010000 +#define PENDIN 0040000 +#define IEXTEN 0100000 + + +/* tcflow() and TCXONC use these */ +#define TCOOFF 0 +#define TCOON 1 +#define TCIOFF 2 +#define TCION 3 + +/* tcflush() and TCFLSH use these */ +#define TCIFLUSH 0 +#define TCOFLUSH 1 +#define TCIOFLUSH 2 + +/* tcsetattr uses these */ +#define TCSANOW 0 +#define TCSADRAIN 1 +#define TCSAFLUSH 2 + +#endif /* __V850_TERMBITS_H__ */ diff --git a/include/asm-v850/termios.h b/include/asm-v850/termios.h new file mode 100644 index 000000000000..79e97b59806e --- /dev/null +++ b/include/asm-v850/termios.h @@ -0,0 +1,106 @@ +#ifndef __V850_TERMIOS_H__ +#define __V850_TERMIOS_H__ + +#include <asm/termbits.h> +#include <asm/ioctls.h> + +struct winsize { + unsigned short ws_row; + unsigned short ws_col; + unsigned short ws_xpixel; + unsigned short ws_ypixel; +}; + +#define NCC 8 +struct termio { + unsigned short c_iflag; /* input mode flags */ + unsigned short c_oflag; /* output mode flags */ + unsigned short c_cflag; /* control mode flags */ + unsigned short c_lflag; /* local mode flags */ + unsigned char c_line; /* line discipline */ + unsigned char c_cc[NCC]; /* control characters */ +}; + +/* modem lines */ +#define TIOCM_LE 0x001 +#define TIOCM_DTR 0x002 +#define TIOCM_RTS 0x004 +#define TIOCM_ST 0x008 +#define TIOCM_SR 0x010 +#define TIOCM_CTS 0x020 +#define TIOCM_CAR 0x040 +#define TIOCM_RNG 0x080 +#define TIOCM_DSR 0x100 +#define TIOCM_CD TIOCM_CAR +#define TIOCM_RI TIOCM_RNG +#define TIOCM_OUT1 0x2000 +#define TIOCM_OUT2 0x4000 +#define TIOCM_LOOP 0x8000 + +/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ + +/* line disciplines */ +#define N_TTY 0 +#define N_SLIP 1 +#define N_MOUSE 2 +#define N_PPP 3 +#define N_STRIP 4 +#define N_AX25 5 +#define N_X25 6 /* X.25 async */ +#define N_6PACK 7 +#define N_MASC 8 /* Reserved for Mobitex module <kaz@cafe.net> */ +#define N_R3964 9 /* Reserved for Simatic R3964 module */ +#define N_PROFIBUS_FDL 10 /* Reserved for Profibus <Dave@mvhi.com> */ +#define N_IRDA 11 /* Linux IR - http://irda.sourceforge.net/ */ +#define N_SMSBLOCK 12 /* SMS block mode - for talking to GSM data cards about SMS messages */ +#define N_HDLC 13 /* synchronous HDLC */ +#define N_SYNC_PPP 14 /* synchronous PPP */ +#define N_HCI 15 /* Bluetooth HCI UART */ + +#ifdef __KERNEL__ + +/* intr=^C quit=^\ erase=del kill=^U + eof=^D vtime=\0 vmin=\1 sxtc=\0 + start=^Q stop=^S susp=^Z eol=\0 + reprint=^R discard=^U werase=^W lnext=^V + eol2=\0 +*/ +#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" + +/* + * Translate a "termio" structure into a "termios". Ugh. + */ +#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ + unsigned short __tmp; \ + get_user(__tmp,&(termio)->x); \ + *(unsigned short *) &(termios)->x = __tmp; \ +} + +#define user_termio_to_kernel_termios(termios, termio) \ +({ \ + SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ + SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ + copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ +}) + +/* + * Translate a "termios" structure into a "termio". Ugh. + */ +#define kernel_termios_to_user_termio(termio, termios) \ +({ \ + put_user((termios)->c_iflag, &(termio)->c_iflag); \ + put_user((termios)->c_oflag, &(termio)->c_oflag); \ + put_user((termios)->c_cflag, &(termio)->c_cflag); \ + put_user((termios)->c_lflag, &(termio)->c_lflag); \ + put_user((termios)->c_line, &(termio)->c_line); \ + copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ +}) + +#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios)) +#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios)) + +#endif /* __KERNEL__ */ + +#endif /* __V850_TERMIOS_H__ */ diff --git a/include/asm-v850/thread_info.h b/include/asm-v850/thread_info.h new file mode 100644 index 000000000000..be925c583037 --- /dev/null +++ b/include/asm-v850/thread_info.h @@ -0,0 +1,129 @@ +/* + * include/asm-v850/thread_info.h -- v850 low-level thread information + * + * Copyright (C) 2002 NEC Corporation + * Copyright (C) 2002 Miles Bader <miles@gnu.org> + * Copyright (C) 2002 David Howells (dhowells@redhat.com) + * - Incorporating suggestions made by Linus Torvalds and Dave Miller + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * This file was derived from the PPC version, include/asm-ppc/thread_info.h + * which was adapted from the i386 version by Paul Mackerras + */ + +#ifndef __V850_THREAD_INFO_H__ +#define __V850_THREAD_INFO_H__ + +#ifdef __KERNEL__ + +#ifndef __ASSEMBLY__ + +/* + * low level task data. + * If you change this, change the TI_* offsets below to match. + */ +struct thread_info { + struct task_struct *task; /* main task structure */ + struct exec_domain *exec_domain; /* execution domain */ + unsigned long flags; /* low level flags */ + int cpu; /* cpu we're on */ + int preempt_count; +}; + +#define INIT_THREAD_INFO(tsk) \ +{ \ + .task = &tsk, \ + .exec_domain = &default_exec_domain, \ + .flags = 0, \ + .cpu = 0, \ + .preempt_count = 1 \ +} + +#define init_thread_info (init_thread_union.thread_info) +#define init_stack (init_thread_union.stack) + +/* + * macros/functions for gaining access to the thread information structure + */ + +/* thread information allocation */ +#define alloc_thread_info() ((struct thread_info *) \ + __get_free_pages(GFP_KERNEL, 1)) +#define free_thread_info(ti) free_pages((unsigned long) (ti), 1) +#define get_thread_info(ti) get_task_struct((ti)->task) +#define put_thread_info(ti) put_task_struct((ti)->task) + +#endif /* __ASSEMBLY__ */ + + +/* + * Offsets in thread_info structure, used in assembly code + */ +#define TI_TASK 0 +#define TI_EXECDOMAIN 4 +#define TI_FLAGS 8 +#define TI_CPU 12 +#define TI_PREEMPT 16 +#define TI_SOFTIRQ 20 +#define TI_HARDIRQ 24 + +#define PREEMPT_ACTIVE 0x4000000 + +/* + * thread information flag bit numbers + */ +#define TIF_SYSCALL_TRACE 0 /* syscall trace active */ +#define TIF_NOTIFY_RESUME 1 /* resumption notification requested */ +#define TIF_SIGPENDING 2 /* signal pending */ +#define TIF_NEED_RESCHED 3 /* rescheduling necessary */ +#define TIF_POLLING_NRFLAG 4 /* true if poll_idle() is polling + TIF_NEED_RESCHED */ + +/* as above, but as bit values */ +#define _TIF_SYSCALL_TRACE (1<<TIF_SYSCALL_TRACE) +#define _TIF_NOTIFY_RESUME (1<<TIF_NOTIFY_RESUME) +#define _TIF_SIGPENDING (1<<TIF_SIGPENDING) +#define _TIF_NEED_RESCHED (1<<TIF_NEED_RESCHED) +#define _TIF_POLLING_NRFLAG (1<<TIF_POLLING_NRFLAG) + + +/* Size of kernel stack for each process. */ +#define THREAD_SIZE 0x2000 + +/* The alignment of kernel threads, with thread_info structures at their + base. Thus, a pointer for a task's task structure can be derived from + its kernel stack pointer. */ +#define THREAD_ALIGNMENT THREAD_SIZE +#define THREAD_MASK (-THREAD_ALIGNMENT) + + +#ifdef __ASSEMBLY__ + +/* Put a pointer to the current thread_info structure into REG. Note that + this definition requires THREAD_MASK to be representable as a signed + 16-bit value. */ +#define GET_CURRENT_THREAD(reg) \ + /* Use `addi' and then `and' instead of just `andi', because \ + `addi' sign-extends the immediate value, whereas `andi' \ + zero-extends it. */ \ + addi THREAD_MASK, r0, reg; \ + and sp, reg + +#else + +/* Return a pointer to the current thread_info structure. */ +static inline struct thread_info *current_thread_info (void) +{ + register unsigned long sp __asm__ ("sp"); + return (struct thread_info *)(sp & THREAD_MASK); +} + +#endif /* __ASSEMBLY__ */ + + +#endif /* __KERNEL__ */ + +#endif /* __V850_THREAD_INFO_H__ */ diff --git a/include/asm-v850/timex.h b/include/asm-v850/timex.h new file mode 100644 index 000000000000..729e2789fcf3 --- /dev/null +++ b/include/asm-v850/timex.h @@ -0,0 +1,22 @@ +/* + * linux/include/asm-v850/timex.h + * + * v850 architecture timex specifications + */ +#ifndef __V850_TIMEX_H__ +#define __V850_TIMEX_H__ + +#define CLOCK_TICK_RATE 1193180 /* Underlying HZ */ +#define CLOCK_TICK_FACTOR 20 /* Factor of both 1000000 and CLOCK_TICK_RATE */ +#define FINETUNE ((((((long)LATCH * HZ - CLOCK_TICK_RATE) << SHIFT_HZ) * \ + (1000000/CLOCK_TICK_FACTOR) / (CLOCK_TICK_RATE/CLOCK_TICK_FACTOR)) \ + << (SHIFT_SCALE-SHIFT_HZ)) / HZ) + +typedef unsigned long cycles_t; + +static inline cycles_t get_cycles(void) +{ + return 0; +} + +#endif /* __V850_TIMEX_H__ */ diff --git a/include/asm-v850/tlb.h b/include/asm-v850/tlb.h new file mode 100644 index 000000000000..73bc9ead40dd --- /dev/null +++ b/include/asm-v850/tlb.h @@ -0,0 +1,21 @@ +/* + * include/asm-v850/tlb.h + * + * Copyright (C) 2002 NEC Corporation + * Copyright (C) 2002 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_TLB_H__ +#define __V850_TLB_H__ + +#define tlb_flush(tlb) ((void)0) + +#include <asm-generic/tlb.h> + +#endif /* __V850_TLB_H__ */ diff --git a/include/asm-v850/tlbflush.h b/include/asm-v850/tlbflush.h new file mode 100644 index 000000000000..b7f75f4cc485 --- /dev/null +++ b/include/asm-v850/tlbflush.h @@ -0,0 +1,71 @@ +/* + * include/asm-v850/tlbflush.h + * + * Copyright (C) 2001,02 NEC Corporation + * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_TLBFLUSH_H__ +#define __V850_TLBFLUSH_H__ + +#include <asm/setup.h> +#include <asm/machdep.h> + + +/* + * flush all user-space atc entries. + */ +static inline void __flush_tlb(void) +{ + BUG (); +} + +static inline void __flush_tlb_one(unsigned long addr) +{ + BUG (); +} + +#define flush_tlb() __flush_tlb() + +/* + * flush all atc entries (both kernel and user-space entries). + */ +static inline void flush_tlb_all(void) +{ + BUG (); +} + +static inline void flush_tlb_mm(struct mm_struct *mm) +{ + BUG (); +} + +static inline void flush_tlb_page(struct vm_area_struct *vma, unsigned long addr) +{ + BUG (); +} + +static inline void flush_tlb_range(struct vm_area_struct *vma, + unsigned long start, unsigned long end) +{ + BUG (); +} + +extern inline void flush_tlb_kernel_page(unsigned long addr) +{ + BUG (); +} + +extern inline void flush_tlb_pgtables(struct mm_struct *mm, + unsigned long start, unsigned long end) +{ + BUG (); +} + +#endif /* __V850_TLBFLUSH_H__ */ diff --git a/include/asm-v850/topology.h b/include/asm-v850/topology.h new file mode 100644 index 000000000000..6040e41d7945 --- /dev/null +++ b/include/asm-v850/topology.h @@ -0,0 +1,6 @@ +#ifndef __V850_TOPOLOGY_H__ +#define __V850_TOPOLOGY_H__ + +#include <asm-generic/topology.h> + +#endif /* __V850_TOPOLOGY_H__ */ diff --git a/include/asm-v850/types.h b/include/asm-v850/types.h new file mode 100644 index 000000000000..6d144379f13e --- /dev/null +++ b/include/asm-v850/types.h @@ -0,0 +1,62 @@ +#ifndef __V850_TYPES_H__ +#define __V850_TYPES_H__ + +#ifndef __ASSEMBLY__ + +/* + * This file is never included by application software unless + * explicitly requested (e.g., via linux/types.h) in which case the + * application is Linux specific so (user-) name space pollution is + * not a major issue. However, for interoperability, libraries still + * need to be careful to avoid a name clashes. + */ + +typedef unsigned short umode_t; + +/* + * __xx is ok: it doesn't pollute the POSIX namespace. Use these in the + * header files exported to user space + */ + +typedef __signed__ char __s8; +typedef unsigned char __u8; + +typedef __signed__ short __s16; +typedef unsigned short __u16; + +typedef __signed__ int __s32; +typedef unsigned int __u32; + +#if defined(__GNUC__) && !defined(__STRICT_ANSI__) +typedef __signed__ long long __s64; +typedef unsigned long long __u64; +#endif + +/* + * These aren't exported outside the kernel to avoid name space clashes + */ +#ifdef __KERNEL__ + +typedef signed char s8; +typedef unsigned char u8; + +typedef signed short s16; +typedef unsigned short u16; + +typedef signed int s32; +typedef unsigned int u32; + +typedef signed long long s64; +typedef unsigned long long u64; + +#define BITS_PER_LONG 32 + +/* Dma addresses are 32-bits wide. */ + +typedef u32 dma_addr_t; + +#endif /* __KERNEL__ */ + +#endif /* !__ASSEMBLY__ */ + +#endif /* __V850_TYPES_H__ */ diff --git a/include/asm-v850/uaccess.h b/include/asm-v850/uaccess.h new file mode 100644 index 000000000000..201dd9b328d0 --- /dev/null +++ b/include/asm-v850/uaccess.h @@ -0,0 +1,159 @@ +#ifndef __V850_UACCESS_H__ +#define __V850_UACCESS_H__ + +/* + * User space memory access functions + */ +#include <linux/sched.h> + +#include <asm/segment.h> +#include <asm/machdep.h> + +#define VERIFY_READ 0 +#define VERIFY_WRITE 1 + +extern inline int access_ok (int type, const void *addr, unsigned long size) +{ + /* XXX I guess we should check against real ram bounds at least, and + possibly make sure ADDR is not within the kernel. + For now we just check to make sure it's not a small positive + or negative value, as that will at least catch some kinds of + error. In particular, we make sure that ADDR's not within the + interrupt vector area, which we know starts at zero, or within the + peripheral-I/O area, which is located just _before_ zero. */ + unsigned long val = (unsigned long)addr; + return val >= (0x80 + NUM_CPU_IRQS*16) && val < 0xFFFFF000; +} + +extern inline int verify_area (int type, const void *addr, unsigned long size) +{ + return access_ok (type, addr, size) ? 0 : -EFAULT; +} + +/* + * The exception table consists of pairs of addresses: the first is the + * address of an instruction that is allowed to fault, and the second is + * the address at which the program should continue. No registers are + * modified, so it is entirely up to the continuation code to figure out + * what to do. + * + * All the routines below use bits of fixup code that are out of line + * with the main instruction path. This means when everything is well, + * we don't even have to jump over them. Further, they do not intrude + * on our cache or tlb entries. + */ + +struct exception_table_entry +{ + unsigned long insn, fixup; +}; + +/* Returns 0 if exception not found and fixup otherwise. */ +extern unsigned long search_exception_table (unsigned long); + + +/* + * These are the main single-value transfer routines. They automatically + * use the right size if we just have the right pointer type. + */ + +extern int bad_user_access_length (void); + +#define __get_user(var, ptr) \ + ({ \ + int __gu_err = 0; \ + typeof(*(ptr)) __gu_val = 0; \ + switch (sizeof (*(ptr))) { \ + case 1: \ + case 2: \ + case 4: \ + __gu_val = *(ptr); \ + break; \ + case 8: \ + memcpy(&__gu_val, ptr, sizeof(__gu_val)); \ + break; \ + default: \ + __gu_val = 0; \ + __gu_err = __get_user_bad (); \ + break; \ + } \ + (var) = __gu_val; \ + __gu_err; \ + }) +#define __get_user_bad() (bad_user_access_length (), (-EFAULT)) + +#define __put_user(var, ptr) \ + ({ \ + int __pu_err = 0; \ + switch (sizeof (*(ptr))) { \ + case 1: \ + case 2: \ + case 4: \ + *(ptr) = (var); \ + break; \ + case 8: { \ + typeof(*(ptr)) __pu_val = 0; \ + memcpy(ptr, &__pu_val, sizeof(__pu_val)); \ + } \ + break; \ + default: \ + __pu_err = __put_user_bad (); \ + break; \ + } \ + __pu_err; \ + }) +#define __put_user_bad() (bad_user_access_length (), (-EFAULT)) + +#define put_user(x, ptr) __put_user(x, ptr) +#define get_user(x, ptr) __get_user(x, ptr) + +#define __copy_from_user(to, from, n) (memcpy (to, from, n), 0) +#define __copy_to_user(to, from, n) (memcpy(to, from, n), 0) + +#define copy_from_user(to, from, n) __copy_from_user (to, from, n) +#define copy_to_user(to, from, n) __copy_to_user(to, from, n) + +#define copy_to_user_ret(to,from,n,retval) \ + ({ if (copy_to_user (to,from,n)) return retval; }) + +#define copy_from_user_ret(to,from,n,retval) \ + ({ if (copy_from_user (to,from,n)) return retval; }) + +/* + * Copy a null terminated string from userspace. + */ + +static inline long +strncpy_from_user (char *dst, const char *src, long count) +{ + char *tmp; + strncpy (dst, src, count); + for (tmp = dst; *tmp && count > 0; tmp++, count--) + ; + return tmp - dst; +} + +/* + * Return the size of a string (including the ending 0) + * + * Return 0 on exception, a value greater than N if too long + */ +static inline long strnlen_user (const char *src, long n) +{ + return strlen (src) + 1; +} + +#define strlen_user(str) strnlen_user (str, 32767) + +/* + * Zero Userspace + */ + +static inline unsigned long +clear_user (void *to, unsigned long n) +{ + memset (to, 0, n); + return 0; +} + +#endif /* __V850_UACCESS_H__ */ diff --git a/include/asm-v850/ucontext.h b/include/asm-v850/ucontext.h new file mode 100644 index 000000000000..303c21590cff --- /dev/null +++ b/include/asm-v850/ucontext.h @@ -0,0 +1,14 @@ +#ifndef __V850_UCONTEXT_H__ +#define __V850_UCONTEXT_H__ + +#include <asm/sigcontext.h> + +struct ucontext { + unsigned long uc_flags; + struct ucontext *uc_link; + stack_t uc_stack; + struct sigcontext uc_mcontext; + sigset_t uc_sigmask; /* mask last for extensibility */ +}; + +#endif /* __V850_UCONTEXT_H__ */ diff --git a/include/asm-v850/unaligned.h b/include/asm-v850/unaligned.h new file mode 100644 index 000000000000..65e38362142b --- /dev/null +++ b/include/asm-v850/unaligned.h @@ -0,0 +1,130 @@ +/* + * include/asm-v850/unaligned.h -- Unaligned memory access + * + * Copyright (C) 2001 NEC Corporation + * Copyright (C) 2001 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * This file is a copy of the arm version, include/asm-arm/unaligned.h + * + * Note that some v850 chips support unaligned access, but it seems too + * annoying to use. + */ + +#ifndef __V850_UNALIGNED_H__ +#define __V850_UNALIGNED_H__ + +#include <asm/types.h> + +extern int __bug_unaligned_x(void *ptr); + +/* + * What is the most efficient way of loading/storing an unaligned value? + * + * That is the subject of this file. Efficiency here is defined as + * minimum code size with minimum register usage for the common cases. + * It is currently not believed that long longs are common, so we + * trade efficiency for the chars, shorts and longs against the long + * longs. + * + * Current stats with gcc 2.7.2.2 for these functions: + * + * ptrsize get: code regs put: code regs + * 1 1 1 1 2 + * 2 3 2 3 2 + * 4 7 3 7 3 + * 8 20 6 16 6 + * + * gcc 2.95.1 seems to code differently: + * + * ptrsize get: code regs put: code regs + * 1 1 1 1 2 + * 2 3 2 3 2 + * 4 7 4 7 4 + * 8 19 8 15 6 + * + * which may or may not be more efficient (depending upon whether + * you can afford the extra registers). Hopefully the gcc 2.95 + * is inteligent enough to decide if it is better to use the + * extra register, but evidence so far seems to suggest otherwise. + * + * Unfortunately, gcc is not able to optimise the high word + * out of long long >> 32, or the low word from long long << 32 + */ + +#define __get_unaligned_2(__p) \ + (__p[0] | __p[1] << 8) + +#define __get_unaligned_4(__p) \ + (__p[0] | __p[1] << 8 | __p[2] << 16 | __p[3] << 24) + +#define get_unaligned(ptr) \ + ({ \ + __typeof__(*(ptr)) __v; \ + __u8 *__p = (__u8 *)(ptr); \ + switch (sizeof(*(ptr))) { \ + case 1: __v = *(ptr); break; \ + case 2: __v = __get_unaligned_2(__p); break; \ + case 4: __v = __get_unaligned_4(__p); break; \ + case 8: { \ + unsigned int __v1, __v2; \ + __v2 = __get_unaligned_4((__p+4)); \ + __v1 = __get_unaligned_4(__p); \ + __v = ((unsigned long long)__v2 << 32 | __v1); \ + } \ + break; \ + default: __v = __bug_unaligned_x(__p); break; \ + } \ + __v; \ + }) + + +extern inline void __put_unaligned_2(__u32 __v, register __u8 *__p) +{ + *__p++ = __v; + *__p++ = __v >> 8; +} + +extern inline void __put_unaligned_4(__u32 __v, register __u8 *__p) +{ + __put_unaligned_2(__v >> 16, __p + 2); + __put_unaligned_2(__v, __p); +} + +extern inline void __put_unaligned_8(const unsigned long long __v, register __u8 *__p) +{ + /* + * tradeoff: 8 bytes of stack for all unaligned puts (2 + * instructions), or an extra register in the long long + * case - go for the extra register. + */ + __put_unaligned_4(__v >> 32, __p+4); + __put_unaligned_4(__v, __p); +} + +/* + * Try to store an unaligned value as efficiently as possible. + */ +#define put_unaligned(val,ptr) \ + ({ \ + switch (sizeof(*(ptr))) { \ + case 1: \ + *(ptr) = (val); \ + break; \ + case 2: __put_unaligned_2((val),(__u8 *)(ptr)); \ + break; \ + case 4: __put_unaligned_4((val),(__u8 *)(ptr)); \ + break; \ + case 8: __put_unaligned_8((val),(__u8 *)(ptr)); \ + break; \ + default: __bug_unaligned_x(ptr); \ + break; \ + } \ + (void) 0; \ + }) + + +#endif /* __V850_UNALIGNED_H__ */ diff --git a/include/asm-v850/unistd.h b/include/asm-v850/unistd.h new file mode 100644 index 000000000000..3782597e4ebd --- /dev/null +++ b/include/asm-v850/unistd.h @@ -0,0 +1,411 @@ +/* + * include/asm-v850/unistd.h -- System call numbers and invocation mechanism + * + * Copyright (C) 2001,02 NEC Corporation + * Copyright (C) 2001,02 Miles Bader <miles@gnu.org> + * + * This file is subject to the terms and conditions of the GNU General + * Public License. See the file COPYING in the main directory of this + * archive for more details. + * + * Written by Miles Bader <miles@gnu.org> + */ + +#ifndef __V850_UNISTD_H__ +#define __V850_UNISTD_H__ + +#include <asm/clinkage.h> + +#define __NR_exit 1 +#define __NR_fork 2 +#define __NR_read 3 +#define __NR_write 4 +#define __NR_open 5 +#define __NR_close 6 +#define __NR_waitpid 7 +#define __NR_creat 8 +#define __NR_link 9 +#define __NR_unlink 10 +#define __NR_execve 11 +#define __NR_chdir 12 +#define __NR_time 13 +#define __NR_mknod 14 +#define __NR_chmod 15 +#define __NR_chown 16 +#define __NR_break 17 +#define __NR_lseek 19 +#define __NR_getpid 20 +#define __NR_mount 21 +#define __NR_umount 22 +#define __NR_setuid 23 +#define __NR_getuid 24 +#define __NR_stime 25 +#define __NR_ptrace 26 +#define __NR_alarm 27 +#define __NR_pause 29 +#define __NR_utime 30 +#define __NR_stty 31 +#define __NR_gtty 32 +#define __NR_access 33 +#define __NR_nice 34 +#define __NR_ftime 35 +#define __NR_sync 36 +#define __NR_kill 37 +#define __NR_rename 38 +#define __NR_mkdir 39 +#define __NR_rmdir 40 +#define __NR_dup 41 +#define __NR_pipe 42 +#define __NR_times 43 +#define __NR_prof 44 +#define __NR_brk 45 +#define __NR_setgid 46 +#define __NR_getgid 47 +#define __NR_signal 48 +#define __NR_geteuid 49 +#define __NR_getegid 50 +#define __NR_acct 51 +#define __NR_umount2 52 +#define __NR_lock 53 +#define __NR_ioctl 54 +#define __NR_fcntl 55 +#define __NR_setpgid 57 +#define __NR_umask 60 +#define __NR_chroot 61 +#define __NR_ustat 62 +#define __NR_dup2 63 +#define __NR_getppid 64 +#define __NR_getpgrp 65 +#define __NR_setsid 66 +#define __NR_sigaction 67 +#define __NR_sgetmask 68 +#define __NR_ssetmask 69 +#define __NR_setreuid 70 +#define __NR_setregid 71 +#define __NR_sigsuspend 72 +#define __NR_sigpending 73 +#define __NR_sethostname 74 +#define __NR_setrlimit 75 +#define __NR_ugetrlimit 76 +#define __NR_getrusage 77 +#define __NR_gettimeofday 78 +#define __NR_settimeofday 79 +#define __NR_getgroups 80 +#define __NR_setgroups 81 +#define __NR_select 82 +#define __NR_symlink 83 +#define __NR_readlink 85 +#define __NR_uselib 86 +#define __NR_swapon 87 +#define __NR_reboot 88 +#define __NR_readdir 89 +#define __NR_mmap 90 +#define __NR_munmap 91 +#define __NR_truncate 92 +#define __NR_ftruncate 93 +#define __NR_fchmod 94 +#define __NR_fchown 95 +#define __NR_getpriority 96 +#define __NR_setpriority 97 +#define __NR_profil 98 +#define __NR_statfs 99 +#define __NR_fstatfs 100 +#define __NR_socketcall 102 +#define __NR_syslog 103 +#define __NR_setitimer 104 +#define __NR_getitimer 105 +#define __NR_stat 106 +#define __NR_lstat 107 +#define __NR_fstat 108 +#define __NR_vhangup 111 +#define __NR_wait4 114 +#define __NR_swapoff 115 +#define __NR_sysinfo 116 +#define __NR_ipc 117 +#define __NR_fsync 118 +#define __NR_sigreturn 119 +#define __NR_clone 120 +#define __NR_setdomainname 121 +#define __NR_uname 122 +#define __NR_cacheflush 123 +#define __NR_adjtimex 124 +#define __NR_mprotect 125 +#define __NR_sigprocmask 126 +#define __NR_create_module 127 +#define __NR_init_module 128 +#define __NR_delete_module 129 +#define __NR_get_kernel_syms 130 +#define __NR_quotactl 131 +#define __NR_getpgid 132 +#define __NR_fchdir 133 +#define __NR_bdflush 134 +#define __NR_sysfs 135 +#define __NR_personality 136 +#define __NR_afs_syscall 137 /* Syscall for Andrew File System */ +#define __NR_setfsuid 138 +#define __NR_setfsgid 139 +#define __NR__llseek 140 +#define __NR_getdents 141 +#define __NR_flock 143 +#define __NR_msync 144 +#define __NR_readv 145 +#define __NR_writev 146 +#define __NR_getsid 147 +#define __NR_fdatasync 148 +#define __NR__sysctl 149 +#define __NR_mlock 150 +#define __NR_munlock 151 +#define __NR_mlockall 152 +#define __NR_munlockall 153 +#define __NR_sched_setparam 154 +#define __NR_sched_getparam 155 +#define __NR_sched_setscheduler 156 +#define __NR_sched_getscheduler 157 +#define __NR_sched_yield 158 +#define __NR_sched_get_priority_max 159 +#define __NR_sched_get_priority_min 160 +#define __NR_sched_rr_get_interval 161 +#define __NR_nanosleep 162 +#define __NR_mremap 163 +#define __NR_setresuid 164 +#define __NR_getresuid 165 +#define __NR_query_module 167 +#define __NR_poll 168 +#define __NR_nfsservctl 169 +#define __NR_setresgid 170 +#define __NR_getresgid 171 +#define __NR_prctl 172 +#define __NR_rt_sigreturn 173 +#define __NR_rt_sigaction 174 +#define __NR_rt_sigprocmask 175 +#define __NR_rt_sigpending 176 +#define __NR_rt_sigtimedwait 177 +#define __NR_rt_sigqueueinfo 178 +#define __NR_rt_sigsuspend 179 +#define __NR_pread 180 +#define __NR_pwrite 181 +#define __NR_lchown 182 +#define __NR_getcwd 183 +#define __NR_capget 184 +#define __NR_capset 185 +#define __NR_sigaltstack 186 +#define __NR_sendfile 187 +#define __NR_getpmsg 188 /* some people actually want streams */ +#define __NR_putpmsg 189 /* some people actually want streams */ +#define __NR_vfork 190 +#define __NR_mmap2 192 +#define __NR_truncate64 193 +#define __NR_ftruncate64 194 +#define __NR_stat64 195 +#define __NR_lstat64 196 +#define __NR_fstat64 197 +#define __NR_fcntl64 198 +#define __NR_getdents64 199 +#define __NR_pivot_root 200 +#define __NR_gettid 201 +#define __NR_tkill 202 +/* #define __NR_mincore 203 */ +/* #define __NR_madvise 204 */ + + +/* Syscall protocol: + Syscall number in r12, args in r6-r9, r13-r14 + Return value in r10 + Trap 0 for `short' syscalls, where all the args can fit in function + call argument registers, and trap 1 when there are additional args in + r13-r14. */ + +#define SYSCALL_NUM "r12" +#define SYSCALL_ARG0 "r6" +#define SYSCALL_ARG1 "r7" +#define SYSCALL_ARG2 "r8" +#define SYSCALL_ARG3 "r9" +#define SYSCALL_ARG4 "r13" +#define SYSCALL_ARG5 "r14" +#define SYSCALL_RET "r10" + +#define SYSCALL_SHORT_TRAP "0" +#define SYSCALL_LONG_TRAP "1" + +/* Registers clobbered by any syscall. This _doesn't_ include the syscall + number (r12) or the `extended arg' registers (r13, r14), even though + they are actually clobbered too (this is because gcc's `asm' statement + doesn't allow a clobber to be used as an input or output). */ +#define SYSCALL_CLOBBERS "r1", "r5", "r11", "r15", "r16", \ + "r17", "r18", "r19" + +/* Registers clobbered by a `short' syscall. This includes all clobbers + except the syscall number (r12). */ +#define SYSCALL_SHORT_CLOBBERS SYSCALL_CLOBBERS, "r13", "r14" + + +#define __syscall_return(type, res) \ + do { \ + /* user-visible error numbers are in the range -1 - -124: \ + see <asm-v850/errno.h> */ \ + if ((unsigned long)(res) >= (unsigned long)(-125)) { \ + errno = -(res); \ + res = -1; \ + } \ + return (type) (res); \ + } while (0) + + +#define _syscall0(type, name) \ +type name (void) \ +{ \ + register unsigned long __syscall __asm__ (SYSCALL_NUM) = __NR_##name; \ + register unsigned long __ret __asm__ (SYSCALL_RET); \ + __asm__ __volatile__ ("trap " SYSCALL_SHORT_TRAP \ + : "=r" (__ret), "=r" (__syscall) \ + : "1" (__syscall) \ + : SYSCALL_SHORT_CLOBBERS); \ + __syscall_return (type, __ret); \ +} + +#define _syscall1(type, name, atype, a) \ +type name (atype a) \ +{ \ + register atype __a __asm__ (SYSCALL_ARG0) = a; \ + register unsigned long __syscall __asm__ (SYSCALL_NUM) = __NR_##name; \ + register unsigned long __ret __asm__ (SYSCALL_RET); \ + __asm__ __volatile__ ("trap " SYSCALL_SHORT_TRAP \ + : "=r" (__ret), "=r" (__syscall) \ + : "1" (__syscall), "r" (__a) \ + : SYSCALL_SHORT_CLOBBERS); \ + __syscall_return (type, __ret); \ +} + +#define _syscall2(type, name, atype, a, btype, b) \ +type name (atype a, btype b) \ +{ \ + register atype __a __asm__ (SYSCALL_ARG0) = a; \ + register btype __b __asm__ (SYSCALL_ARG1) = b; \ + register unsigned long __syscall __asm__ (SYSCALL_NUM) = __NR_##name; \ + register unsigned long __ret __asm__ (SYSCALL_RET); \ + __asm__ __volatile__ ("trap " SYSCALL_SHORT_TRAP \ + : "=r" (__ret), "=r" (__syscall) \ + : "1" (__syscall), "r" (__a), "r" (__b) \ + : SYSCALL_SHORT_CLOBBERS); \ + __syscall_return (type, __ret); \ +} + +#define _syscall3(type, name, atype, a, btype, b, ctype, c) \ +type name (atype a, btype b, ctype c) \ +{ \ + register atype __a __asm__ (SYSCALL_ARG0) = a; \ + register btype __b __asm__ (SYSCALL_ARG1) = b; \ + register ctype __c __asm__ (SYSCALL_ARG2) = c; \ + register unsigned long __syscall __asm__ (SYSCALL_NUM) = __NR_##name; \ + register unsigned long __ret __asm__ (SYSCALL_RET); \ + __asm__ __volatile__ ("trap " SYSCALL_SHORT_TRAP \ + : "=r" (__ret), "=r" (__syscall) \ + : "1" (__syscall), "r" (__a), "r" (__b), "r" (__c) \ + : SYSCALL_SHORT_CLOBBERS); \ + __syscall_return (type, __ret); \ +} + +#define _syscall4(type, name, atype, a, btype, b, ctype, c, dtype, d) \ +type name (atype a, btype b, ctype c, dtype d) \ +{ \ + register atype __a __asm__ (SYSCALL_ARG0) = a; \ + register btype __b __asm__ (SYSCALL_ARG1) = b; \ + register ctype __c __asm__ (SYSCALL_ARG2) = c; \ + register dtype __d __asm__ (SYSCALL_ARG3) = d; \ + register unsigned long __syscall __asm__ (SYSCALL_NUM) = __NR_##name; \ + register unsigned long __ret __asm__ (SYSCALL_RET); \ + __asm__ __volatile__ ("trap " SYSCALL_SHORT_TRAP \ + : "=r" (__ret), "=r" (__syscall) \ + : "1" (__syscall), \ + "r" (__a), "r" (__b), "r" (__c), "r" (__d) \ + : SYSCALL_SHORT_CLOBBERS); \ + __syscall_return (type, __ret); \ +} + +#define _syscall5(type, name, atype, a, btype, b, ctype, c, dtype, d, etype,e)\ +type name (atype a, btype b, ctype c, dtype d, etype e) \ +{ \ + register atype __a __asm__ (SYSCALL_ARG0) = a; \ + register btype __b __asm__ (SYSCALL_ARG1) = b; \ + register ctype __c __asm__ (SYSCALL_ARG2) = c; \ + register dtype __d __asm__ (SYSCALL_ARG3) = d; \ + register etype __e __asm__ (SYSCALL_ARG4) = e; \ + register unsigned long __syscall __asm__ (SYSCALL_NUM) = __NR_##name; \ + register unsigned long __ret __asm__ (SYSCALL_RET); \ + __asm__ __volatile__ ("trap " SYSCALL_LONG_TRAP \ + : "=r" (__ret), "=r" (__syscall), "=r" (__e) \ + : "1" (__syscall), \ + "r" (__a), "r" (__b), "r" (__c), "r" (__d), "2" (__e) \ + : SYSCALL_CLOBBERS); \ + __syscall_return (type, __ret); \ +} + +#define _syscall6(type, name, atype, a, btype, b, ctype, c, dtype, d, etype, e, ftype, f) \ +type name (atype a, btype b, ctype c, dtype d, etype e, ftype f) \ +{ \ + register atype __a __asm__ (SYSCALL_ARG0) = a; \ + register btype __b __asm__ (SYSCALL_ARG1) = b; \ + register ctype __c __asm__ (SYSCALL_ARG2) = c; \ + register dtype __d __asm__ (SYSCALL_ARG3) = d; \ + register etype __e __asm__ (SYSCALL_ARG4) = e; \ + register etype __f __asm__ (SYSCALL_ARG5) = f; \ + register unsigned long __syscall __asm__ (SYSCALL_NUM) = __NR_##name; \ + register unsigned long __ret __asm__ (SYSCALL_RET); \ + __asm__ __volatile__ ("trap " SYSCALL_LONG_TRAP \ + : "=r" (__ret), "=r" (__syscall), \ + "=r" (__e), "=r" (__f) \ + : "1" (__syscall), \ + "r" (__a), "r" (__b), "r" (__c), "r" (__d), \ + "2" (__e), "3" (__f) \ + : SYSCALL_CLOBBERS); \ + __syscall_return (type, __ret); \ +} + + +#ifdef __KERNEL_SYSCALLS__ + +/* + * we need this inline - forking from kernel space will result + * in NO COPY ON WRITE (!!!), until an execve is executed. This + * is no problem, but for the stack. This is handled by not letting + * main() use the stack at all after fork(). Thus, no function + * calls - which means inline code for fork too, as otherwise we + * would use the stack upon exit from 'fork()'. + * + * Actually only pause and fork are needed inline, so that there + * won't be any messing with the stack from main(), but we define + * some others too. + */ +#define __NR__exit __NR_exit +extern inline _syscall0(pid_t,setsid) +extern inline _syscall3(int,write,int,fd,const char *,buf,off_t,count) +extern inline _syscall3(int,read,int,fd,char *,buf,off_t,count) +extern inline _syscall3(off_t,lseek,int,fd,off_t,offset,int,count) +extern inline _syscall1(int,dup,int,fd) +extern inline _syscall3(int,execve,const char *,file,char **,argv,char **,envp) +extern inline _syscall3(int,open,const char *,file,int,flag,int,mode) +extern inline _syscall1(int,close,int,fd) +extern inline _syscall1(int,_exit,int,exitcode) +extern inline _syscall3(pid_t,waitpid,pid_t,pid,int *,wait_stat,int,options) + +extern inline pid_t wait(int * wait_stat) +{ + return waitpid (-1, wait_stat, 0); +} + +#endif + +/* + * "Conditional" syscalls + */ +#define cond_syscall(name) \ + asm (".weak\t" C_SYMBOL_STRING(name) ";" \ + ".set\t" C_SYMBOL_STRING(name) "," C_SYMBOL_STRING(sys_ni_syscall)); +#if 0 +/* This doesn't work if there's a function prototype for NAME visible, + because the argument types probably won't match. */ +#define cond_syscall(name) \ + void name (void) __attribute__ ((weak, alias ("sys_ni_syscall"))); +#endif + +#endif /* __V850_UNISTD_H__ */ diff --git a/include/asm-v850/user.h b/include/asm-v850/user.h new file mode 100644 index 000000000000..ccf4cea6dc9c --- /dev/null +++ b/include/asm-v850/user.h @@ -0,0 +1,56 @@ +#ifndef __V850_USER_H__ +#define __V850_USER_H__ + +/* Adapted from <asm-ppc/user.h>. */ + +#ifdef __KERNEL__ + +#include <linux/ptrace.h> +#include <asm/page.h> + +/* + * Core file format: The core file is written in such a way that gdb + * can understand it and provide useful information to the user (under + * linux we use the `trad-core' bfd, NOT the osf-core). The file contents + * are as follows: + * + * upage: 1 page consisting of a user struct that tells gdb + * what is present in the file. Directly after this is a + * copy of the task_struct, which is currently not used by gdb, + * but it may come in handy at some point. All of the registers + * are stored as part of the upage. The upage should always be + * only one page long. + * data: The data segment follows next. We use current->end_text to + * current->brk to pick up all of the user variables, plus any memory + * that may have been sbrk'ed. No attempt is made to determine if a + * page is demand-zero or if a page is totally unused, we just cover + * the entire range. All of the addresses are rounded in such a way + * that an integral number of pages is written. + * stack: We need the stack information in order to get a meaningful + * backtrace. We need to write the data from usp to + * current->start_stack, so we round each of these in order to be able + * to write an integer number of pages. + */ +struct user { + struct pt_regs regs; /* entire machine state */ + size_t u_tsize; /* text size (pages) */ + size_t u_dsize; /* data size (pages) */ + size_t u_ssize; /* stack size (pages) */ + unsigned long start_code; /* text starting address */ + unsigned long start_data; /* data starting address */ + unsigned long start_stack; /* stack starting address */ + long int signal; /* signal causing core dump */ + struct regs * u_ar0; /* help gdb find registers */ + unsigned long magic; /* identifies a core file */ + char u_comm[32]; /* user command name */ +}; + +#define NBPG PAGE_SIZE +#define UPAGES 1 +#define HOST_TEXT_START_ADDR (u.start_code) +#define HOST_DATA_START_ADDR (u.start_data) +#define HOST_STACK_END_ADDR (u.start_stack + u.u_ssize * NBPG) + +#endif /* __KERNEL__ */ + +#endif /* __V850_USER_H__ */ |