Add to linux/pci.h PCI-X, CompactPCI, and PCI Vital Product Data register defines

1 files changed, 42 insertions, 3 deletions

diff --git a/include/linux/pci.h b/include/linux/pci.h
index 30c4a9dbc855..eede29dc50ad 100644
--- a/include/linux/pci.h
+++ b/include/linux/pci.h
@@ -65,9 +65,9 @@
 #define  PCI_HEADER_TYPE_CARDBUS 2
 
 #define PCI_BIST		0x0f	/* 8 bits */
-#define PCI_BIST_CODE_MASK	0x0f	/* Return result */
-#define PCI_BIST_START		0x40	/* 1 to start BIST, 2 secs or less */
-#define PCI_BIST_CAPABLE	0x80	/* 1 if BIST capable */
+#define  PCI_BIST_CODE_MASK	0x0f	/* Return result */
+#define  PCI_BIST_START		0x40	/* 1 to start BIST, 2 secs or less */
+#define  PCI_BIST_CAPABLE	0x80	/* 1 if BIST capable */
 
 /*
  * Base addresses specify locations in memory or I/O space.
@@ -195,6 +195,7 @@
 #define  PCI_CAP_ID_SLOTID	0x04	/* Slot Identification */
 #define  PCI_CAP_ID_MSI		0x05	/* Message Signalled Interrupts */
 #define  PCI_CAP_ID_CHSWP	0x06	/* CompactPCI HotSwap */
+#define  PCI_CAP_ID_PCIX	0x07	/* PCI-X */
 #define PCI_CAP_LIST_NEXT	1	/* Next capability in the list */
 #define PCI_CAP_FLAGS		2	/* Capability defined flags (16 bits) */
 #define PCI_CAP_SIZEOF		4
@@ -251,6 +252,13 @@
 #define  PCI_AGP_COMMAND_RATE1	0x0001	/* Use 1x rate */
 #define PCI_AGP_SIZEOF		12
 
+/* Vital Product Data */
+
+#define PCI_VPD_ADDR		2	/* Address to access (15 bits!) */
+#define  PCI_VPD_ADDR_MASK	0x7fff	/* Address mask */
+#define  PCI_VPD_ADDR_F		0x8000	/* Write 0, 1 indicates completion */
+#define PCI_VPD_DATA		4	/* 32-bits of data returned here */
+
 /* Slot Identification */
 
 #define PCI_SID_ESR		2	/* Expansion Slot Register */
@@ -271,6 +279,37 @@
 #define PCI_MSI_DATA_32		8	/* 16 bits of data for 32-bit devices */
 #define PCI_MSI_DATA_64		12	/* 16 bits of data for 64-bit devices */
 
+/* CompactPCI Hotswap Register */
+
+#define PCI_CHSWP_CSR		2	/* Control and Status Register */
+#define  PCI_CHSWP_DHA		0x01	/* Device Hiding Arm */
+#define  PCI_CHSWP_EIM		0x02	/* ENUM# Signal Mask */
+#define  PCI_CHSWP_PIE		0x04	/* Pending Insert or Extract */
+#define  PCI_CHSWP_LOO		0x08	/* LED On / Off */
+#define  PCI_CHSWP_PI		0x30	/* Programming Interface */
+#define  PCI_CHSWP_EXT		0x40	/* ENUM# status - extraction */
+#define  PCI_CHSWP_INS		0x80	/* ENUM# status - insertion */
+
+/* PCI-X registers */
+
+#define PCI_X_CMD		2	/* Modes & Features */
+#define  PCI_X_CMD_DPERR_E	0x0001	/* Data Parity Error Recovery Enable */
+#define  PCI_X_CMD_ERO		0x0002	/* Enable Relaxed Ordering */
+#define  PCI_X_CMD_MAX_READ	0x000c	/* Max Memory Read Byte Count */
+#define  PCI_X_CMD_MAX_SPLIT	0x0070	/* Max Outstanding Split Transactions */
+#define PCI_X_DEVFN		4	/* A copy of devfn. */
+#define PCI_X_BUSNR		5	/* Bus segment number */
+#define PCI_X_STATUS		6	/* PCI-X capabilities */
+#define  PCI_X_STATUS_64BIT	0x0001	/* 64-bit device */
+#define  PCI_X_STATUS_133MHZ	0x0002	/* 133 MHz capable */
+#define  PCI_X_STATUS_SPL_DISC	0x0004	/* Split Completion Discarded */
+#define  PCI_X_STATUS_UNX_SPL	0x0008	/* Unexpected Split Completion */
+#define  PCI_X_STATUS_COMPLEX	0x0010	/* Device Complexity */
+#define  PCI_X_STATUS_MAX_READ	0x0060	/* Designed Maximum Memory Read Count */
+#define  PCI_X_STATUS_MAX_SPLIT	0x0380	/* Design Max Outstanding Split Trans */
+#define  PCI_X_STATUS_MAX_CUM	0x1c00	/* Designed Max Cumulative Read Size */
+#define  PCI_X_STATUS_SPL_ERR	0x2000	/* Rcvd Split Completion Error Msg */
+
 /* Include the ID list */
 
 #include <linux/pci_ids.h>