Merge branch 'broadcom-next'

Robert Hancock says:

====================
Broadcom PHY driver updates

Updates to the Broadcom PHY driver related to use with copper SFP modules.

Changed since v3:
-fixed kerneldoc error

Changed since v2:
-Create flag for PHY on SFP module and use that rather than accessing
 attached_dev directly in PHY driver

Changed since v1:
-Reversed conditional to reduce indentation
-Added missing setting of MII_BCM54XX_AUXCTL_MISC_WREN in
 MII_BCM54XX_AUXCTL_SHDWSEL_MISC register
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

2 files changed, 15 insertions, 0 deletions

diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h
index 8fe1d55371ac..c2c2147dfeb8 100644
--- a/include/linux/brcmphy.h
+++ b/include/linux/brcmphy.h
@@ -129,6 +129,7 @@
 
 #define MII_BCM54XX_AUXCTL_SHDWSEL_MISC			0x07
 #define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_WIRESPEED_EN	0x0010
+#define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_EN	0x0080
 #define MII_BCM54XX_AUXCTL_SHDWSEL_MISC_RGMII_SKEW_EN	0x0100
 #define MII_BCM54XX_AUXCTL_MISC_FORCE_AMDIX		0x0200
 #define MII_BCM54XX_AUXCTL_MISC_WREN			0x8000
@@ -216,6 +217,9 @@
 /* 11111: Mode Control Register */
 #define BCM54XX_SHD_MODE		0x1f
 #define BCM54XX_SHD_INTF_SEL_MASK	GENMASK(2, 1)	/* INTERF_SEL[1:0] */
+#define BCM54XX_SHD_INTF_SEL_RGMII	0x02
+#define BCM54XX_SHD_INTF_SEL_SGMII	0x04
+#define BCM54XX_SHD_INTF_SEL_GBIC	0x06
 #define BCM54XX_SHD_MODE_1000BX		BIT(0)	/* Enable 1000-X registers */
 
 /*
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 0d537f59b77f..1a12e4436b5b 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -492,6 +492,7 @@ struct macsec_ops;
  * @sysfs_links: Internal boolean tracking sysfs symbolic links setup/removal.
  * @loopback_enabled: Set true if this PHY has been loopbacked successfully.
  * @downshifted_rate: Set true if link speed has been downshifted.
+ * @is_on_sfp_module: Set true if PHY is located on an SFP module.
  * @state: State of the PHY for management purposes
  * @dev_flags: Device-specific flags used by the PHY driver.
  * @irq: IRQ number of the PHY's interrupt (-1 if none)
@@ -565,6 +566,7 @@ struct phy_device {
 	unsigned sysfs_links:1;
 	unsigned loopback_enabled:1;
 	unsigned downshifted_rate:1;
+	unsigned is_on_sfp_module:1;
 
 	unsigned autoneg:1;
 	/* The most recently read link state */
@@ -1297,6 +1299,15 @@ static inline bool phy_is_internal(struct phy_device *phydev)
 }
 
 /**
+ * phy_on_sfp - Convenience function for testing if a PHY is on an SFP module
+ * @phydev: the phy_device struct
+ */
+static inline bool phy_on_sfp(struct phy_device *phydev)
+{
+	return phydev->is_on_sfp_module;
+}
+
+/**
  * phy_interface_mode_is_rgmii - Convenience function for testing if a
  * PHY interface mode is RGMII (all variants)
  * @mode: the &phy_interface_t enum