Merge tag 'sound-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound

Pull sound updates from Takashi Iwai:
 "Many updates in this development cycle are found in ASoC where it got
  a wide range of changes for the continued refactoring.

  Some highlights are below.

  ASoC:

   - Continued refactoring work by Morimoto-san toward the full
     componentization; the changes are seen allover the places

   - Support for force disconnecting muxes in DAPM

   - Continued development of ASoC Intel SOF stuff

   - New drivers for Cirrus Logic CS47L35, CS47L85 and CS47L90, Conexant
     CX2072X, Realtek RT1011 and RT1308

  HD-audio:

   - More fixes and adjustments for ASoC SOF HD-audio

   - Fix for resume problem on some Realtek codecs

  USB-audio:

   - A few fixes for the issues reported by syzbot USB fuzzer

   - Fix for UAC2 extension unit parser

   - Quirks for Line6 Helix, Emgaic Unitor 8

  FireWire:

   - Lots of code refactoring and fixes in most of its components"

* tag 'sound-5.3-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (626 commits)
  ALSA: firewire-lib: code refactoring for local variables
  ALSA: firewire-lib: code refactoring for post operation to data block counter
  ALSA: firewire-lib: code refactoring for error path of parser for CIP header
  ALSA: firewire-lib: fix different data block counter between probed event and transferred isochronous packet
  ALSA: firewire-lib: fix initial value of data block count for IR context without CIP_DBC_IS_END_EVENT
  ALSA: firewire-lib/fireface: fix initial value of data block counter for IR context with CIP_NO_HEADER
  ALSA: firewire-lib: fix invalid length of rx packet payload for tracepoint events
  ALSA: usb-audio: fix Line6 Helix audio format rates
  firewire-motu: fix wrong reference count for stream functionality at error path of rawmidi interface
  ALSA: firewire-digi00x: fix wrong reference count for stream functionality at error path of rawmidi interface
  ALSA: dice: fix wrong reference count for stream functionality at error path of rawmidi interface
  ALSA: oxfw: fix wrong reference count for stream functionality at error path of rawmidi interface
  ALSA: fireworks: fix wrong reference count for stream functionality at error path of rawmidi interface
  ALSA: bebob: fix wrong reference count for stream functionality at error path of rawmidi interface
  ASoC: SOF: Intel: implement runtime idle for CNL/APL
  ASoC: SOF: add runtime idle callback
  ASoC: hdac_hdmi: report codec link up/down status to bus
  ASoC: SOF: debug: fix possible memory leak in sof_dfsentry_write()
  ASoC: sunxi: sun50i-codec-analog: Add earpiece
  ASoC: rt5665: remove redundant assignment to variable idx
  ...

1 files changed, 34 insertions, 74 deletions

diff --git a/sound/usb/line6/pod.c b/sound/usb/line6/pod.c
index 200ae53adf22..ee4c9d220fdf 100644
--- a/sound/usb/line6/pod.c
+++ b/sound/usb/line6/pod.c
@@ -35,11 +35,9 @@
 	Stages of POD startup procedure
 */
 enum {
-	POD_STARTUP_INIT = 1,
 	POD_STARTUP_VERSIONREQ,
-	POD_STARTUP_WORKQUEUE,
 	POD_STARTUP_SETUP,
-	POD_STARTUP_LAST = POD_STARTUP_SETUP - 1
+	POD_STARTUP_DONE,
 };
 
 enum {
@@ -59,12 +57,6 @@ struct usb_line6_pod {
 	/* Instrument monitor level */
 	int monitor_level;
 
-	/* Timer for device initialization */
-	struct timer_list startup_timer;
-
-	/* Work handler for device initialization */
-	struct work_struct startup_work;
-
 	/* Current progress in startup procedure */
 	int startup_progress;
 
@@ -78,6 +70,8 @@ struct usb_line6_pod {
 	int device_id;
 };
 
+#define line6_to_pod(x)		container_of(x, struct usb_line6_pod, line6)
+
 #define POD_SYSEX_CODE 3
 
 /* *INDENT-OFF* */
@@ -169,10 +163,6 @@ static const char pod_version_header[] = {
 	0xf2, 0x7e, 0x7f, 0x06, 0x02
 };
 
-/* forward declarations: */
-static void pod_startup2(struct timer_list *t);
-static void pod_startup3(struct usb_line6_pod *pod);
-
 static char *pod_alloc_sysex_buffer(struct usb_line6_pod *pod, int code,
 				    int size)
 {
@@ -185,14 +175,17 @@ static char *pod_alloc_sysex_buffer(struct usb_line6_pod *pod, int code,
 */
 static void line6_pod_process_message(struct usb_line6 *line6)
 {
-	struct usb_line6_pod *pod = (struct usb_line6_pod *) line6;
+	struct usb_line6_pod *pod = line6_to_pod(line6);
 	const unsigned char *buf = pod->line6.buffer_message;
 
 	if (memcmp(buf, pod_version_header, sizeof(pod_version_header)) == 0) {
 		pod->firmware_version = buf[13] * 100 + buf[14] * 10 + buf[15];
 		pod->device_id = ((int)buf[8] << 16) | ((int)buf[9] << 8) |
 				 (int) buf[10];
-		pod_startup3(pod);
+		if (pod->startup_progress == POD_STARTUP_VERSIONREQ) {
+			pod->startup_progress = POD_STARTUP_SETUP;
+			schedule_delayed_work(&line6->startup_work, 0);
+		}
 		return;
 	}
 
@@ -277,47 +270,27 @@ static ssize_t device_id_show(struct device *dev,
 	context). After the last one has finished, the device is ready to use.
 */
 
-static void pod_startup1(struct usb_line6_pod *pod)
-{
-	CHECK_STARTUP_PROGRESS(pod->startup_progress, POD_STARTUP_INIT);
-
-	/* delay startup procedure: */
-	line6_start_timer(&pod->startup_timer, POD_STARTUP_DELAY, pod_startup2);
-}
-
-static void pod_startup2(struct timer_list *t)
-{
-	struct usb_line6_pod *pod = from_timer(pod, t, startup_timer);
-	struct usb_line6 *line6 = &pod->line6;
-
-	CHECK_STARTUP_PROGRESS(pod->startup_progress, POD_STARTUP_VERSIONREQ);
-
-	/* request firmware version: */
-	line6_version_request_async(line6);
-}
-
-static void pod_startup3(struct usb_line6_pod *pod)
-{
-	CHECK_STARTUP_PROGRESS(pod->startup_progress, POD_STARTUP_WORKQUEUE);
-
-	/* schedule work for global work queue: */
-	schedule_work(&pod->startup_work);
-}
-
-static void pod_startup4(struct work_struct *work)
+static void pod_startup(struct usb_line6 *line6)
 {
-	struct usb_line6_pod *pod =
-	    container_of(work, struct usb_line6_pod, startup_work);
-	struct usb_line6 *line6 = &pod->line6;
-
-	CHECK_STARTUP_PROGRESS(pod->startup_progress, POD_STARTUP_SETUP);
-
-	/* serial number: */
-	line6_read_serial_number(&pod->line6, &pod->serial_number);
-
-	/* ALSA audio interface: */
-	if (snd_card_register(line6->card))
-		dev_err(line6->ifcdev, "Failed to register POD card.\n");
+	struct usb_line6_pod *pod = line6_to_pod(line6);
+
+	switch (pod->startup_progress) {
+	case POD_STARTUP_VERSIONREQ:
+		/* request firmware version: */
+		line6_version_request_async(line6);
+		break;
+	case POD_STARTUP_SETUP:
+		/* serial number: */
+		line6_read_serial_number(&pod->line6, &pod->serial_number);
+
+		/* ALSA audio interface: */
+		if (snd_card_register(line6->card))
+			dev_err(line6->ifcdev, "Failed to register POD card.\n");
+		pod->startup_progress = POD_STARTUP_DONE;
+		break;
+	default:
+		break;
+	}
 }
 
 /* POD special files: */
@@ -353,7 +326,7 @@ static int snd_pod_control_monitor_get(struct snd_kcontrol *kcontrol,
 				       struct snd_ctl_elem_value *ucontrol)
 {
 	struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
-	struct usb_line6_pod *pod = (struct usb_line6_pod *)line6pcm->line6;
+	struct usb_line6_pod *pod = line6_to_pod(line6pcm->line6);
 
 	ucontrol->value.integer.value[0] = pod->monitor_level;
 	return 0;
@@ -364,7 +337,7 @@ static int snd_pod_control_monitor_put(struct snd_kcontrol *kcontrol,
 				       struct snd_ctl_elem_value *ucontrol)
 {
 	struct snd_line6_pcm *line6pcm = snd_kcontrol_chip(kcontrol);
-	struct usb_line6_pod *pod = (struct usb_line6_pod *)line6pcm->line6;
+	struct usb_line6_pod *pod = line6_to_pod(line6pcm->line6);
 
 	if (ucontrol->value.integer.value[0] == pod->monitor_level)
 		return 0;
@@ -387,30 +360,16 @@ static const struct snd_kcontrol_new pod_control_monitor = {
 };
 
 /*
-	POD device disconnected.
-*/
-static void line6_pod_disconnect(struct usb_line6 *line6)
-{
-	struct usb_line6_pod *pod = (struct usb_line6_pod *)line6;
-
-	del_timer_sync(&pod->startup_timer);
-	cancel_work_sync(&pod->startup_work);
-}
-
-/*
 	 Try to init POD device.
 */
 static int pod_init(struct usb_line6 *line6,
 		    const struct usb_device_id *id)
 {
 	int err;
-	struct usb_line6_pod *pod = (struct usb_line6_pod *) line6;
+	struct usb_line6_pod *pod = line6_to_pod(line6);
 
 	line6->process_message = line6_pod_process_message;
-	line6->disconnect = line6_pod_disconnect;
-
-	timer_setup(&pod->startup_timer, NULL, 0);
-	INIT_WORK(&pod->startup_work, pod_startup4);
+	line6->startup = pod_startup;
 
 	/* create sysfs entries: */
 	err = snd_card_add_dev_attr(line6->card, &pod_dev_attr_group);
@@ -443,7 +402,8 @@ static int pod_init(struct usb_line6 *line6,
 		pod->monitor_level = POD_SYSTEM_INVALID;
 
 		/* initiate startup procedure: */
-		pod_startup1(pod);
+		schedule_delayed_work(&line6->startup_work,
+				      msecs_to_jiffies(POD_STARTUP_DELAY));
 	}
 
 	return 0;