Merge tag 'block-6.19-20251218' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux

Pull block fixes from Jens Axboe:

 - ublk selftests for missing coverage

 - two fixes for the block integrity code

 - fix for the newly added newly added PR read keys ioctl, limiting the
   memory that can be allocated

 - work around for a deadlock that can occur with ublk, where partition
   scanning ends up recursing back into file closure, which needs the
   same mutex grabbed. Not the prettiest thing in the world, but an
   acceptable work-around until we can eliminate the reliance on
   disk->open_mutex for this

 - fix for a race between enabling writeback throttling and new IO
   submissions

 - move a bit of bio flag handling code. No changes, but needed for a
   patchset for a future kernel

 - fix for an init time id leak failure in rnbd

 - loop/zloop state check fix

* tag 'block-6.19-20251218' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux:
  block: validate interval_exp integrity limit
  block: validate pi_offset integrity limit
  block: rnbd-clt: Fix leaked ID in init_dev()
  ublk: fix deadlock when reading partition table
  block: add allocation size check in blkdev_pr_read_keys()
  Documentation: admin-guide: blockdev: replace zone_capacity with zone_capacity_mb when creating devices
  zloop: use READ_ONCE() to read lo->lo_state in queue_rq path
  loop: use READ_ONCE() to read lo->lo_state without locking
  block: fix race between wbt_enable_default and IO submission
  selftests: ublk: add user copy test cases
  selftests: ublk: add support for user copy to kublk
  selftests: ublk: forbid multiple data copy modes
  selftests: ublk: don't share backing files between ublk servers
  selftests: ublk: use auto_zc for PER_IO_DAEMON tests in stress_04
  selftests: ublk: fix fio arguments in run_io_and_recover()
  selftests: ublk: remove unused ios map in seq_io.bt
  selftests: ublk: correct last_rw map type in seq_io.bt
  selftests: ublk: fix overflow in ublk_queue_auto_zc_fallback()
  block: move around bio flagging helpers

20 files changed, 342 insertions, 33 deletions

diff --git a/tools/testing/selftests/ublk/Makefile b/tools/testing/selftests/ublk/Makefile
index 770269efe42a..837977b62417 100644
--- a/tools/testing/selftests/ublk/Makefile
+++ b/tools/testing/selftests/ublk/Makefile
@@ -21,24 +21,32 @@ TEST_PROGS += test_generic_10.sh
 TEST_PROGS += test_generic_11.sh
 TEST_PROGS += test_generic_12.sh
 TEST_PROGS += test_generic_13.sh
+TEST_PROGS += test_generic_14.sh
 
 TEST_PROGS += test_null_01.sh
 TEST_PROGS += test_null_02.sh
+TEST_PROGS += test_null_03.sh
 TEST_PROGS += test_loop_01.sh
 TEST_PROGS += test_loop_02.sh
 TEST_PROGS += test_loop_03.sh
 TEST_PROGS += test_loop_04.sh
 TEST_PROGS += test_loop_05.sh
+TEST_PROGS += test_loop_06.sh
+TEST_PROGS += test_loop_07.sh
 TEST_PROGS += test_stripe_01.sh
 TEST_PROGS += test_stripe_02.sh
 TEST_PROGS += test_stripe_03.sh
 TEST_PROGS += test_stripe_04.sh
+TEST_PROGS += test_stripe_05.sh
+TEST_PROGS += test_stripe_06.sh
 
 TEST_PROGS += test_stress_01.sh
 TEST_PROGS += test_stress_02.sh
 TEST_PROGS += test_stress_03.sh
 TEST_PROGS += test_stress_04.sh
 TEST_PROGS += test_stress_05.sh
+TEST_PROGS += test_stress_06.sh
+TEST_PROGS += test_stress_07.sh
 
 TEST_GEN_PROGS_EXTENDED = kublk
 
diff --git a/tools/testing/selftests/ublk/file_backed.c b/tools/testing/selftests/ublk/file_backed.c
index cd9fe69ecce2..269d5f124e06 100644
--- a/tools/testing/selftests/ublk/file_backed.c
+++ b/tools/testing/selftests/ublk/file_backed.c
@@ -34,8 +34,9 @@ static int loop_queue_tgt_rw_io(struct ublk_thread *t, struct ublk_queue *q,
 	unsigned zc = ublk_queue_use_zc(q);
 	unsigned auto_zc = ublk_queue_use_auto_zc(q);
 	enum io_uring_op op = ublk_to_uring_op(iod, zc | auto_zc);
+	struct ublk_io *io = ublk_get_io(q, tag);
 	struct io_uring_sqe *sqe[3];
-	void *addr = (zc | auto_zc) ? NULL : (void *)iod->addr;
+	void *addr = io->buf_addr;
 
 	if (!zc || auto_zc) {
 		ublk_io_alloc_sqes(t, sqe, 1);
@@ -56,7 +57,7 @@ static int loop_queue_tgt_rw_io(struct ublk_thread *t, struct ublk_queue *q,
 
 	ublk_io_alloc_sqes(t, sqe, 3);
 
-	io_uring_prep_buf_register(sqe[0], q, tag, q->q_id, ublk_get_io(q, tag)->buf_index);
+	io_uring_prep_buf_register(sqe[0], q, tag, q->q_id, io->buf_index);
 	sqe[0]->flags |= IOSQE_CQE_SKIP_SUCCESS | IOSQE_IO_HARDLINK;
 	sqe[0]->user_data = build_user_data(tag,
 			ublk_cmd_op_nr(sqe[0]->cmd_op), 0, q->q_id, 1);
@@ -68,7 +69,7 @@ static int loop_queue_tgt_rw_io(struct ublk_thread *t, struct ublk_queue *q,
 	sqe[1]->flags |= IOSQE_FIXED_FILE | IOSQE_IO_HARDLINK;
 	sqe[1]->user_data = build_user_data(tag, ublk_op, 0, q->q_id, 1);
 
-	io_uring_prep_buf_unregister(sqe[2], q, tag, q->q_id, ublk_get_io(q, tag)->buf_index);
+	io_uring_prep_buf_unregister(sqe[2], q, tag, q->q_id, io->buf_index);
 	sqe[2]->user_data = build_user_data(tag, ublk_cmd_op_nr(sqe[2]->cmd_op), 0, q->q_id, 1);
 
 	return 2;
diff --git a/tools/testing/selftests/ublk/kublk.c b/tools/testing/selftests/ublk/kublk.c
index f8fa102a627f..185ba553686a 100644
--- a/tools/testing/selftests/ublk/kublk.c
+++ b/tools/testing/selftests/ublk/kublk.c
@@ -596,6 +596,38 @@ static void ublk_set_auto_buf_reg(const struct ublk_queue *q,
 	sqe->addr = ublk_auto_buf_reg_to_sqe_addr(&buf);
 }
 
+/* Copy in pieces to test the buffer offset logic */
+#define UBLK_USER_COPY_LEN 2048
+
+static void ublk_user_copy(const struct ublk_io *io, __u8 match_ublk_op)
+{
+	const struct ublk_queue *q = ublk_io_to_queue(io);
+	const struct ublksrv_io_desc *iod = ublk_get_iod(q, io->tag);
+	__u64 off = ublk_user_copy_offset(q->q_id, io->tag);
+	__u8 ublk_op = ublksrv_get_op(iod);
+	__u32 len = iod->nr_sectors << 9;
+	void *addr = io->buf_addr;
+
+	if (ublk_op != match_ublk_op)
+		return;
+
+	while (len) {
+		__u32 copy_len = min(len, UBLK_USER_COPY_LEN);
+		ssize_t copied;
+
+		if (ublk_op == UBLK_IO_OP_WRITE)
+			copied = pread(q->ublk_fd, addr, copy_len, off);
+		else if (ublk_op == UBLK_IO_OP_READ)
+			copied = pwrite(q->ublk_fd, addr, copy_len, off);
+		else
+			assert(0);
+		assert(copied == (ssize_t)copy_len);
+		addr += copy_len;
+		off += copy_len;
+		len -= copy_len;
+	}
+}
+
 int ublk_queue_io_cmd(struct ublk_thread *t, struct ublk_io *io)
 {
 	struct ublk_queue *q = ublk_io_to_queue(io);
@@ -618,9 +650,12 @@ int ublk_queue_io_cmd(struct ublk_thread *t, struct ublk_io *io)
 
 	if (io->flags & UBLKS_IO_NEED_GET_DATA)
 		cmd_op = UBLK_U_IO_NEED_GET_DATA;
-	else if (io->flags & UBLKS_IO_NEED_COMMIT_RQ_COMP)
+	else if (io->flags & UBLKS_IO_NEED_COMMIT_RQ_COMP) {
+		if (ublk_queue_use_user_copy(q))
+			ublk_user_copy(io, UBLK_IO_OP_READ);
+
 		cmd_op = UBLK_U_IO_COMMIT_AND_FETCH_REQ;
-	else if (io->flags & UBLKS_IO_NEED_FETCH_RQ)
+	} else if (io->flags & UBLKS_IO_NEED_FETCH_RQ)
 		cmd_op = UBLK_U_IO_FETCH_REQ;
 
 	if (io_uring_sq_space_left(&t->ring) < 1)
@@ -649,7 +684,7 @@ int ublk_queue_io_cmd(struct ublk_thread *t, struct ublk_io *io)
 	sqe[0]->rw_flags	= 0;
 	cmd->tag	= io->tag;
 	cmd->q_id	= q->q_id;
-	if (!ublk_queue_no_buf(q))
+	if (!ublk_queue_no_buf(q) && !ublk_queue_use_user_copy(q))
 		cmd->addr	= (__u64) (uintptr_t) io->buf_addr;
 	else
 		cmd->addr	= 0;
@@ -751,6 +786,10 @@ static void ublk_handle_uring_cmd(struct ublk_thread *t,
 
 	if (cqe->res == UBLK_IO_RES_OK) {
 		assert(tag < q->q_depth);
+
+		if (ublk_queue_use_user_copy(q))
+			ublk_user_copy(io, UBLK_IO_OP_WRITE);
+
 		if (q->tgt_ops->queue_io)
 			q->tgt_ops->queue_io(t, q, tag);
 	} else if (cqe->res == UBLK_IO_RES_NEED_GET_DATA) {
@@ -1507,7 +1546,7 @@ static void __cmd_create_help(char *exe, bool recovery)
 
 	printf("%s %s -t [null|loop|stripe|fault_inject] [-q nr_queues] [-d depth] [-n dev_id]\n",
 			exe, recovery ? "recover" : "add");
-	printf("\t[--foreground] [--quiet] [-z] [--auto_zc] [--auto_zc_fallback] [--debug_mask mask] [-r 0|1 ] [-g]\n");
+	printf("\t[--foreground] [--quiet] [-z] [--auto_zc] [--auto_zc_fallback] [--debug_mask mask] [-r 0|1] [-g] [-u]\n");
 	printf("\t[-e 0|1 ] [-i 0|1] [--no_ublk_fixed_fd]\n");
 	printf("\t[--nthreads threads] [--per_io_tasks]\n");
 	printf("\t[target options] [backfile1] [backfile2] ...\n");
@@ -1568,6 +1607,7 @@ int main(int argc, char *argv[])
 		{ "get_data",		1,	NULL, 'g'},
 		{ "auto_zc",		0,	NULL,  0 },
 		{ "auto_zc_fallback", 	0,	NULL,  0 },
+		{ "user_copy",		0,	NULL, 'u'},
 		{ "size",		1,	NULL, 's'},
 		{ "nthreads",		1,	NULL,  0 },
 		{ "per_io_tasks",	0,	NULL,  0 },
@@ -1593,7 +1633,7 @@ int main(int argc, char *argv[])
 
 	opterr = 0;
 	optind = 2;
-	while ((opt = getopt_long(argc, argv, "t:n:d:q:r:e:i:s:gaz",
+	while ((opt = getopt_long(argc, argv, "t:n:d:q:r:e:i:s:gazu",
 				  longopts, &option_idx)) != -1) {
 		switch (opt) {
 		case 'a':
@@ -1613,7 +1653,7 @@ int main(int argc, char *argv[])
 			ctx.queue_depth = strtol(optarg, NULL, 10);
 			break;
 		case 'z':
-			ctx.flags |= UBLK_F_SUPPORT_ZERO_COPY | UBLK_F_USER_COPY;
+			ctx.flags |= UBLK_F_SUPPORT_ZERO_COPY;
 			break;
 		case 'r':
 			value = strtol(optarg, NULL, 10);
@@ -1633,6 +1673,9 @@ int main(int argc, char *argv[])
 		case 'g':
 			ctx.flags |= UBLK_F_NEED_GET_DATA;
 			break;
+		case 'u':
+			ctx.flags |= UBLK_F_USER_COPY;
+			break;
 		case 's':
 			ctx.size = strtoull(optarg, NULL, 10);
 			break;
@@ -1686,6 +1729,15 @@ int main(int argc, char *argv[])
 		return -EINVAL;
 	}
 
+	if (!!(ctx.flags & UBLK_F_NEED_GET_DATA) +
+	    !!(ctx.flags & UBLK_F_USER_COPY) +
+	    (ctx.flags & UBLK_F_SUPPORT_ZERO_COPY && !ctx.auto_zc_fallback) +
+	    (ctx.flags & UBLK_F_AUTO_BUF_REG && !ctx.auto_zc_fallback) +
+	    ctx.auto_zc_fallback > 1) {
+		fprintf(stderr, "too many data copy modes specified\n");
+		return -EINVAL;
+	}
+
 	i = optind;
 	while (i < argc && ctx.nr_files < MAX_BACK_FILES) {
 		ctx.files[ctx.nr_files++] = argv[i++];
diff --git a/tools/testing/selftests/ublk/kublk.h b/tools/testing/selftests/ublk/kublk.h
index fe42705c6d42..8a83b90ec603 100644
--- a/tools/testing/selftests/ublk/kublk.h
+++ b/tools/testing/selftests/ublk/kublk.h
@@ -208,6 +208,12 @@ static inline int ublk_io_auto_zc_fallback(const struct ublksrv_io_desc *iod)
 	return !!(iod->op_flags & UBLK_IO_F_NEED_REG_BUF);
 }
 
+static inline __u64 ublk_user_copy_offset(unsigned q_id, unsigned tag)
+{
+	return UBLKSRV_IO_BUF_OFFSET +
+	       ((__u64)q_id << UBLK_QID_OFF | (__u64)tag << UBLK_TAG_OFF);
+}
+
 static inline int is_target_io(__u64 user_data)
 {
 	return (user_data & (1ULL << 63)) != 0;
@@ -390,19 +396,24 @@ static inline int ublk_completed_tgt_io(struct ublk_thread *t,
 	return --io->tgt_ios == 0;
 }
 
-static inline int ublk_queue_use_zc(const struct ublk_queue *q)
+static inline bool ublk_queue_use_zc(const struct ublk_queue *q)
+{
+	return !!(q->flags & UBLK_F_SUPPORT_ZERO_COPY);
+}
+
+static inline bool ublk_queue_use_auto_zc(const struct ublk_queue *q)
 {
-	return q->flags & UBLK_F_SUPPORT_ZERO_COPY;
+	return !!(q->flags & UBLK_F_AUTO_BUF_REG);
 }
 
-static inline int ublk_queue_use_auto_zc(const struct ublk_queue *q)
+static inline bool ublk_queue_auto_zc_fallback(const struct ublk_queue *q)
 {
-	return q->flags & UBLK_F_AUTO_BUF_REG;
+	return !!(q->flags & UBLKS_Q_AUTO_BUF_REG_FALLBACK);
 }
 
-static inline int ublk_queue_auto_zc_fallback(const struct ublk_queue *q)
+static inline bool ublk_queue_use_user_copy(const struct ublk_queue *q)
 {
-	return q->flags & UBLKS_Q_AUTO_BUF_REG_FALLBACK;
+	return !!(q->flags & UBLK_F_USER_COPY);
 }
 
 static inline int ublk_queue_no_buf(const struct ublk_queue *q)
diff --git a/tools/testing/selftests/ublk/stripe.c b/tools/testing/selftests/ublk/stripe.c
index 791fa8dc1651..fd412e1f01c0 100644
--- a/tools/testing/selftests/ublk/stripe.c
+++ b/tools/testing/selftests/ublk/stripe.c
@@ -134,7 +134,7 @@ static int stripe_queue_tgt_rw_io(struct ublk_thread *t, struct ublk_queue *q,
 	struct stripe_array *s = alloc_stripe_array(conf, iod);
 	struct ublk_io *io = ublk_get_io(q, tag);
 	int i, extra = zc ? 2 : 0;
-	void *base = (zc | auto_zc) ? NULL : (void *)iod->addr;
+	void *base = io->buf_addr;
 
 	io->private_data = s;
 	calculate_stripe_array(conf, iod, s, base);
diff --git a/tools/testing/selftests/ublk/test_common.sh b/tools/testing/selftests/ublk/test_common.sh
index 8a4dbd09feb0..6f1c042de40e 100755
--- a/tools/testing/selftests/ublk/test_common.sh
+++ b/tools/testing/selftests/ublk/test_common.sh
@@ -333,11 +333,12 @@ run_io_and_kill_daemon()
 
 run_io_and_recover()
 {
-	local action=$1
+	local size=$1
+	local action=$2
 	local state
 	local dev_id
 
-	shift 1
+	shift 2
 	dev_id=$(_add_ublk_dev "$@")
 	_check_add_dev "$TID" $?
 
diff --git a/tools/testing/selftests/ublk/test_generic_04.sh b/tools/testing/selftests/ublk/test_generic_04.sh
index 8b533217d4a1..baf5b156193d 100755
--- a/tools/testing/selftests/ublk/test_generic_04.sh
+++ b/tools/testing/selftests/ublk/test_generic_04.sh
@@ -8,7 +8,7 @@ ERR_CODE=0
 
 ublk_run_recover_test()
 {
-	run_io_and_recover "kill_daemon" "$@"
+	run_io_and_recover 256M "kill_daemon" "$@"
 	ERR_CODE=$?
 	if [ ${ERR_CODE} -ne 0 ]; then
 		echo "$TID failure: $*"
diff --git a/tools/testing/selftests/ublk/test_generic_05.sh b/tools/testing/selftests/ublk/test_generic_05.sh
index 398e9e2b58e1..7b5083afc02a 100755
--- a/tools/testing/selftests/ublk/test_generic_05.sh
+++ b/tools/testing/selftests/ublk/test_generic_05.sh
@@ -8,7 +8,7 @@ ERR_CODE=0
 
 ublk_run_recover_test()
 {
-	run_io_and_recover "kill_daemon" "$@"
+	run_io_and_recover 256M "kill_daemon" "$@"
 	ERR_CODE=$?
 	if [ ${ERR_CODE} -ne 0 ]; then
 		echo "$TID failure: $*"
diff --git a/tools/testing/selftests/ublk/test_generic_11.sh b/tools/testing/selftests/ublk/test_generic_11.sh
index a00357a5ec6b..d1f973c8c645 100755
--- a/tools/testing/selftests/ublk/test_generic_11.sh
+++ b/tools/testing/selftests/ublk/test_generic_11.sh
@@ -8,7 +8,7 @@ ERR_CODE=0
 
 ublk_run_quiesce_recover()
 {
-	run_io_and_recover "quiesce_dev" "$@"
+	run_io_and_recover 256M "quiesce_dev" "$@"
 	ERR_CODE=$?
 	if [ ${ERR_CODE} -ne 0 ]; then
 		echo "$TID failure: $*"
diff --git a/tools/testing/selftests/ublk/test_generic_14.sh b/tools/testing/selftests/ublk/test_generic_14.sh
new file mode 100755
index 000000000000..cd9b44b97c24
--- /dev/null
+++ b/tools/testing/selftests/ublk/test_generic_14.sh
@@ -0,0 +1,40 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+. "$(cd "$(dirname "$0")" && pwd)"/test_common.sh
+
+TID="generic_14"
+ERR_CODE=0
+
+ublk_run_recover_test()
+{
+	run_io_and_recover 256M "kill_daemon" "$@"
+	ERR_CODE=$?
+	if [ ${ERR_CODE} -ne 0 ]; then
+		echo "$TID failure: $*"
+		_show_result $TID $ERR_CODE
+	fi
+}
+
+if ! _have_program fio; then
+	exit "$UBLK_SKIP_CODE"
+fi
+
+_prep_test "recover" "basic recover function verification (user copy)"
+
+_create_backfile 0 256M
+_create_backfile 1 128M
+_create_backfile 2 128M
+
+ublk_run_recover_test -t null -q 2 -r 1 -u &
+ublk_run_recover_test -t loop -q 2 -r 1 -u "${UBLK_BACKFILES[0]}" &
+ublk_run_recover_test -t stripe -q 2 -r 1 -u "${UBLK_BACKFILES[1]}" "${UBLK_BACKFILES[2]}" &
+wait
+
+ublk_run_recover_test -t null -q 2 -r 1 -u -i 1 &
+ublk_run_recover_test -t loop -q 2 -r 1 -u -i 1 "${UBLK_BACKFILES[0]}" &
+ublk_run_recover_test -t stripe -q 2 -r 1 -u -i 1 "${UBLK_BACKFILES[1]}" "${UBLK_BACKFILES[2]}" &
+wait
+
+_cleanup_test "recover"
+_show_result $TID $ERR_CODE
diff --git a/tools/testing/selftests/ublk/test_loop_06.sh b/tools/testing/selftests/ublk/test_loop_06.sh
new file mode 100755
index 000000000000..1d1a8a725502
--- /dev/null
+++ b/tools/testing/selftests/ublk/test_loop_06.sh
@@ -0,0 +1,25 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+. "$(cd "$(dirname "$0")" && pwd)"/test_common.sh
+
+TID="loop_06"
+ERR_CODE=0
+
+if ! _have_program fio; then
+	exit "$UBLK_SKIP_CODE"
+fi
+
+_prep_test "loop" "write and verify over user copy"
+
+_create_backfile 0 256M
+dev_id=$(_add_ublk_dev -t loop -u "${UBLK_BACKFILES[0]}")
+_check_add_dev $TID $?
+
+# run fio over the ublk disk
+_run_fio_verify_io --filename=/dev/ublkb"${dev_id}" --size=256M
+ERR_CODE=$?
+
+_cleanup_test "loop"
+
+_show_result $TID $ERR_CODE
diff --git a/tools/testing/selftests/ublk/test_loop_07.sh b/tools/testing/selftests/ublk/test_loop_07.sh
new file mode 100755
index 000000000000..493f3fb611a5
--- /dev/null
+++ b/tools/testing/selftests/ublk/test_loop_07.sh
@@ -0,0 +1,21 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+. "$(cd "$(dirname "$0")" && pwd)"/test_common.sh
+
+TID="loop_07"
+ERR_CODE=0
+
+_prep_test "loop" "mkfs & mount & umount with user copy"
+
+_create_backfile 0 256M
+
+dev_id=$(_add_ublk_dev -t loop -u "${UBLK_BACKFILES[0]}")
+_check_add_dev $TID $?
+
+_mkfs_mount_test /dev/ublkb"${dev_id}"
+ERR_CODE=$?
+
+_cleanup_test "loop"
+
+_show_result $TID $ERR_CODE
diff --git a/tools/testing/selftests/ublk/test_null_03.sh b/tools/testing/selftests/ublk/test_null_03.sh
new file mode 100755
index 000000000000..0051067b4686
--- /dev/null
+++ b/tools/testing/selftests/ublk/test_null_03.sh
@@ -0,0 +1,24 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+. "$(cd "$(dirname "$0")" && pwd)"/test_common.sh
+
+TID="null_03"
+ERR_CODE=0
+
+if ! _have_program fio; then
+	exit "$UBLK_SKIP_CODE"
+fi
+
+_prep_test "null" "basic IO test with user copy"
+
+dev_id=$(_add_ublk_dev -t null -u)
+_check_add_dev $TID $?
+
+# run fio over the two disks
+fio --name=job1 --filename=/dev/ublkb"${dev_id}" --ioengine=libaio --rw=readwrite --iodepth=32 --size=256M > /dev/null 2>&1
+ERR_CODE=$?
+
+_cleanup_test "null"
+
+_show_result $TID $ERR_CODE
diff --git a/tools/testing/selftests/ublk/test_stress_04.sh b/tools/testing/selftests/ublk/test_stress_04.sh
index 3f901db4d09d..efa8dc33234b 100755
--- a/tools/testing/selftests/ublk/test_stress_04.sh
+++ b/tools/testing/selftests/ublk/test_stress_04.sh
@@ -31,21 +31,23 @@ _create_backfile 2 128M
 ublk_io_and_kill_daemon 8G -t null -q 4 -z --no_ublk_fixed_fd &
 ublk_io_and_kill_daemon 256M -t loop -q 4 -z --no_ublk_fixed_fd "${UBLK_BACKFILES[0]}" &
 ublk_io_and_kill_daemon 256M -t stripe -q 4 -z "${UBLK_BACKFILES[1]}" "${UBLK_BACKFILES[2]}" &
+wait
 
 if _have_feature "AUTO_BUF_REG"; then
 	ublk_io_and_kill_daemon 8G -t null -q 4 --auto_zc &
 	ublk_io_and_kill_daemon 256M -t loop -q 4 --auto_zc "${UBLK_BACKFILES[0]}" &
 	ublk_io_and_kill_daemon 256M -t stripe -q 4 --auto_zc --no_ublk_fixed_fd "${UBLK_BACKFILES[1]}" "${UBLK_BACKFILES[2]}" &
 	ublk_io_and_kill_daemon 8G -t null -q 4 -z --auto_zc --auto_zc_fallback &
+	wait
 fi
 
 if _have_feature "PER_IO_DAEMON"; then
-	ublk_io_and_kill_daemon 8G -t null -q 4 --nthreads 8 --per_io_tasks &
-	ublk_io_and_kill_daemon 256M -t loop -q 4 --nthreads 8 --per_io_tasks "${UBLK_BACKFILES[0]}" &
-	ublk_io_and_kill_daemon 256M -t stripe -q 4 --nthreads 8 --per_io_tasks "${UBLK_BACKFILES[1]}" "${UBLK_BACKFILES[2]}" &
-	ublk_io_and_kill_daemon 8G -t null -q 4 --nthreads 8 --per_io_tasks &
+	ublk_io_and_kill_daemon 8G -t null -q 4 --auto_zc --nthreads 8 --per_io_tasks &
+	ublk_io_and_kill_daemon 256M -t loop -q 4 --auto_zc --nthreads 8 --per_io_tasks "${UBLK_BACKFILES[0]}" &
+	ublk_io_and_kill_daemon 256M -t stripe -q 4 --auto_zc --nthreads 8 --per_io_tasks "${UBLK_BACKFILES[1]}" "${UBLK_BACKFILES[2]}" &
+	ublk_io_and_kill_daemon 8G -t null -q 4 -z --auto_zc --auto_zc_fallback --nthreads 8 --per_io_tasks &
+	wait
 fi
-wait
 
 _cleanup_test "stress"
 _show_result $TID $ERR_CODE
diff --git a/tools/testing/selftests/ublk/test_stress_05.sh b/tools/testing/selftests/ublk/test_stress_05.sh
index 274295061042..68a194144302 100755
--- a/tools/testing/selftests/ublk/test_stress_05.sh
+++ b/tools/testing/selftests/ublk/test_stress_05.sh
@@ -58,17 +58,17 @@ done
 
 if _have_feature "ZERO_COPY"; then
 	for reissue in $(seq 0 1); do
-		ublk_io_and_remove 8G -t null -q 4 -g -z -r 1 -i "$reissue" &
-		ublk_io_and_remove 256M -t loop -q 4 -g -z -r 1 -i "$reissue" "${UBLK_BACKFILES[1]}" &
+		ublk_io_and_remove 8G -t null -q 4 -z -r 1 -i "$reissue" &
+		ublk_io_and_remove 256M -t loop -q 4 -z -r 1 -i "$reissue" "${UBLK_BACKFILES[1]}" &
 		wait
 	done
 fi
 
 if _have_feature "AUTO_BUF_REG"; then
 	for reissue in $(seq 0 1); do
-		ublk_io_and_remove 8G -t null -q 4 -g --auto_zc -r 1 -i "$reissue" &
-		ublk_io_and_remove 256M -t loop -q 4 -g --auto_zc -r 1 -i "$reissue" "${UBLK_BACKFILES[1]}" &
-		ublk_io_and_remove 8G -t null -q 4 -g -z --auto_zc --auto_zc_fallback -r 1 -i "$reissue" &
+		ublk_io_and_remove 8G -t null -q 4 --auto_zc -r 1 -i "$reissue" &
+		ublk_io_and_remove 256M -t loop -q 4 --auto_zc -r 1 -i "$reissue" "${UBLK_BACKFILES[1]}" &
+		ublk_io_and_remove 8G -t null -q 4 -z --auto_zc --auto_zc_fallback -r 1 -i "$reissue" &
 		wait
 	done
 fi
diff --git a/tools/testing/selftests/ublk/test_stress_06.sh b/tools/testing/selftests/ublk/test_stress_06.sh
new file mode 100755
index 000000000000..37188ec2e1f7
--- /dev/null
+++ b/tools/testing/selftests/ublk/test_stress_06.sh
@@ -0,0 +1,39 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+. "$(cd "$(dirname "$0")" && pwd)"/test_common.sh
+TID="stress_06"
+ERR_CODE=0
+
+ublk_io_and_remove()
+{
+	run_io_and_remove "$@"
+	ERR_CODE=$?
+	if [ ${ERR_CODE} -ne 0 ]; then
+		echo "$TID failure: $*"
+		_show_result $TID $ERR_CODE
+	fi
+}
+
+if ! _have_program fio; then
+	exit "$UBLK_SKIP_CODE"
+fi
+
+_prep_test "stress" "run IO and remove device (user copy)"
+
+_create_backfile 0 256M
+_create_backfile 1 128M
+_create_backfile 2 128M
+
+ublk_io_and_remove 8G -t null -q 4 -u &
+ublk_io_and_remove 256M -t loop -q 4 -u "${UBLK_BACKFILES[0]}" &
+ublk_io_and_remove 256M -t stripe -q 4 -u "${UBLK_BACKFILES[1]}" "${UBLK_BACKFILES[2]}" &
+wait
+
+ublk_io_and_remove 8G -t null -q 4 -u --nthreads 8 --per_io_tasks &
+ublk_io_and_remove 256M -t loop -q 4 -u --nthreads 8 --per_io_tasks "${UBLK_BACKFILES[0]}" &
+ublk_io_and_remove 256M -t stripe -q 4 -u --nthreads 8 --per_io_tasks "${UBLK_BACKFILES[1]}" "${UBLK_BACKFILES[2]}" &
+wait
+
+_cleanup_test "stress"
+_show_result $TID $ERR_CODE
diff --git a/tools/testing/selftests/ublk/test_stress_07.sh b/tools/testing/selftests/ublk/test_stress_07.sh
new file mode 100755
index 000000000000..fb061fc26d36
--- /dev/null
+++ b/tools/testing/selftests/ublk/test_stress_07.sh
@@ -0,0 +1,39 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+. "$(cd "$(dirname "$0")" && pwd)"/test_common.sh
+TID="stress_07"
+ERR_CODE=0
+
+ublk_io_and_kill_daemon()
+{
+	run_io_and_kill_daemon "$@"
+	ERR_CODE=$?
+	if [ ${ERR_CODE} -ne 0 ]; then
+		echo "$TID failure: $*"
+		_show_result $TID $ERR_CODE
+	fi
+}
+
+if ! _have_program fio; then
+	exit "$UBLK_SKIP_CODE"
+fi
+
+_prep_test "stress" "run IO and kill ublk server (user copy)"
+
+_create_backfile 0 256M
+_create_backfile 1 128M
+_create_backfile 2 128M
+
+ublk_io_and_kill_daemon 8G -t null -q 4 -u --no_ublk_fixed_fd &
+ublk_io_and_kill_daemon 256M -t loop -q 4 -u --no_ublk_fixed_fd "${UBLK_BACKFILES[0]}" &
+ublk_io_and_kill_daemon 256M -t stripe -q 4 -u "${UBLK_BACKFILES[1]}" "${UBLK_BACKFILES[2]}" &
+wait
+
+ublk_io_and_kill_daemon 8G -t null -q 4 -u --nthreads 8 --per_io_tasks &
+ublk_io_and_kill_daemon 256M -t loop -q 4 -u --nthreads 8 --per_io_tasks "${UBLK_BACKFILES[0]}" &
+ublk_io_and_kill_daemon 256M -t stripe -q 4 -u --nthreads 8 --per_io_tasks "${UBLK_BACKFILES[1]}" "${UBLK_BACKFILES[2]}" &
+wait
+
+_cleanup_test "stress"
+_show_result $TID $ERR_CODE
diff --git a/tools/testing/selftests/ublk/test_stripe_05.sh b/tools/testing/selftests/ublk/test_stripe_05.sh
new file mode 100755
index 000000000000..05d71951d710
--- /dev/null
+++ b/tools/testing/selftests/ublk/test_stripe_05.sh
@@ -0,0 +1,26 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+. "$(cd "$(dirname "$0")" && pwd)"/test_common.sh
+
+TID="stripe_05"
+ERR_CODE=0
+
+if ! _have_program fio; then
+	exit "$UBLK_SKIP_CODE"
+fi
+
+_prep_test "stripe" "write and verify test on user copy"
+
+_create_backfile 0 256M
+_create_backfile 1 256M
+
+dev_id=$(_add_ublk_dev -t stripe -q 2 -u "${UBLK_BACKFILES[0]}" "${UBLK_BACKFILES[1]}")
+_check_add_dev $TID $?
+
+# run fio over the ublk disk
+_run_fio_verify_io --filename=/dev/ublkb"${dev_id}" --size=512M
+ERR_CODE=$?
+
+_cleanup_test "stripe"
+_show_result $TID $ERR_CODE
diff --git a/tools/testing/selftests/ublk/test_stripe_06.sh b/tools/testing/selftests/ublk/test_stripe_06.sh
new file mode 100755
index 000000000000..d06cac7626e2
--- /dev/null
+++ b/tools/testing/selftests/ublk/test_stripe_06.sh
@@ -0,0 +1,21 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+. "$(cd "$(dirname "$0")" && pwd)"/test_common.sh
+
+TID="stripe_06"
+ERR_CODE=0
+
+_prep_test "stripe" "mkfs & mount & umount on user copy"
+
+_create_backfile 0 256M
+_create_backfile 1 256M
+
+dev_id=$(_add_ublk_dev -t stripe -u -q 2 "${UBLK_BACKFILES[0]}" "${UBLK_BACKFILES[1]}")
+_check_add_dev $TID $?
+
+_mkfs_mount_test /dev/ublkb"${dev_id}"
+ERR_CODE=$?
+
+_cleanup_test "stripe"
+_show_result $TID $ERR_CODE
diff --git a/tools/testing/selftests/ublk/trace/seq_io.bt b/tools/testing/selftests/ublk/trace/seq_io.bt
index 272ac54c9d5f..b2f60a92b118 100644
--- a/tools/testing/selftests/ublk/trace/seq_io.bt
+++ b/tools/testing/selftests/ublk/trace/seq_io.bt
@@ -4,7 +4,7 @@
 	$3:     strlen($2)
 */
 BEGIN {
-	@last_rw[$1, str($2)] = 0;
+	@last_rw[$1, str($2)] = (uint64)0;
 }
 tracepoint:block:block_rq_complete
 {
@@ -17,7 +17,6 @@ tracepoint:block:block_rq_complete
 		}
 		@last_rw[$dev, str($2)] = (args.sector + args.nr_sector);
 	}
-	@ios = count();
 }
 
 END {