diff options
| -rw-r--r-- | arch/arm/configs/pxa255-idp_defconfig | 765 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/idp.c | 160 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/leds-idp.c | 1 | ||||
| -rw-r--r-- | include/asm-arm/arch-pxa/idp.h | 290 |
4 files changed, 892 insertions, 324 deletions
diff --git a/arch/arm/configs/pxa255-idp_defconfig b/arch/arm/configs/pxa255-idp_defconfig new file mode 100644 index 000000000000..5f447c85a055 --- /dev/null +++ b/arch/arm/configs/pxa255-idp_defconfig @@ -0,0 +1,765 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.11-rc3 +# Fri Feb 11 16:53:43 2005 +# +CONFIG_ARM=y +CONFIG_MMU=y +CONFIG_UID16=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_IOMAP=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_LOG_BUF_SHIFT=14 +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +# CONFIG_EMBEDDED is not set +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +# CONFIG_MODULE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set + +# +# System Type +# +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_CO285 is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_CAMELOT is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_IOP3XX is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_L7200 is not set +CONFIG_ARCH_PXA=y +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_H720X is not set + +# +# Intel PXA2xx Implementations +# +# CONFIG_ARCH_LUBBOCK is not set +# CONFIG_MACH_MAINSTONE is not set +CONFIG_ARCH_PXA_IDP=y +# CONFIG_PXA_SHARPSL is not set +CONFIG_PXA25x=y + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_XSCALE=y +CONFIG_CPU_32v5=y +CONFIG_CPU_ABRT_EV5T=y +CONFIG_CPU_CACHE_VIVT=y +CONFIG_CPU_TLB_V4WBI=y +CONFIG_CPU_MINICACHE=y + +# +# Processor Features +# +# CONFIG_ARM_THUMB is not set +CONFIG_XSCALE_PMU=y + +# +# General setup +# +CONFIG_ZBOOT_ROM_TEXT=0x0 +CONFIG_ZBOOT_ROM_BSS=0x0 +# CONFIG_XIP_KERNEL is not set + +# +# PCCARD (PCMCIA/CardBus) support +# +# CONFIG_PCCARD is not set + +# +# PC-card bridges +# + +# +# At least one math emulation must be selected +# +CONFIG_FPE_NWFPE=y +# CONFIG_FPE_NWFPE_XP is not set +# CONFIG_FPE_FASTFPE is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_PM is not set +# CONFIG_PREEMPT is not set +# CONFIG_ARTHUR is not set +CONFIG_CMDLINE="root=/dev/nfs ip=dhcp console=ttyS0,115200 mem=64M" +CONFIG_LEDS=y +CONFIG_LEDS_TIMER=y +CONFIG_LEDS_CPU=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_CONCAT is not set +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set +# CONFIG_MTD_AFS_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=y +CONFIG_MTD_CFI_ADV_OPTIONS=y +CONFIG_MTD_CFI_NOSWAP=y +# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set +# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set +CONFIG_MTD_CFI_GEOMETRY=y +# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_2 is not set +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +# CONFIG_MTD_CFI_I1 is not set +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set +# CONFIG_MTD_XIP is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_ARM_INTEGRATOR is not set +# CONFIG_MTD_EDB7312 is not set +# CONFIG_MTD_SHARP_SL is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLKMTD is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# Plug and Play support +# + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_ATA_OVER_ETH is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +# CONFIG_PACKET is not set +# CONFIG_NETLINK_DEV is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IP_TCPDIAG=y +# CONFIG_IP_TCPDIAG_IPV6 is not set +# CONFIG_IPV6 is not set +# CONFIG_NETFILTER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set +# CONFIG_NET_CLS_ROUTE is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_SMC91X=y + +# +# Ethernet (1000 Mbit) +# + +# +# Ethernet (10000 Mbit) +# + +# +# Token Ring devices +# + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +# CONFIG_IDE_GENERIC is not set +# CONFIG_IDE_ARM is not set +# CONFIG_BLK_DEV_IDEDMA is not set +# CONFIG_IDEDMA_AUTO is not set +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +# CONFIG_SCSI is not set + +# +# Fusion MPT device support +# + +# +# IEEE 1394 (FireWire) support +# + +# +# I2O device support +# + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Input device support +# +CONFIG_INPUT=y + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +CONFIG_INPUT_EVDEV=y +# CONFIG_INPUT_EVBUG is not set + +# +# Input I/O drivers +# +# CONFIG_GAMEPORT is not set +CONFIG_SOUND_GAMEPORT=y +CONFIG_SERIO=y +# CONFIG_SERIO_SERPORT is not set +# CONFIG_SERIO_CT82C710 is not set +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_PXA=y +CONFIG_SERIAL_PXA_CONSOLE=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_DRM is not set +# CONFIG_RAW_DRIVER is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT3_FS is not set +# CONFIG_JBD is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set + +# +# XFS support +# +# CONFIG_XFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +# CONFIG_VFAT_FS is not set +CONFIG_FAT_DEFAULT_CODEPAGE=437 +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_SYSFS=y +# CONFIG_DEVFS_FS is not set +# CONFIG_DEVPTS_FS_XATTR is not set +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +# CONFIG_JFFS2_FS_NAND is not set +# CONFIG_JFFS2_FS_NOR_ECC is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_SUNRPC=y +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y + +# +# Native Language Support +# +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +# CONFIG_NLS_CODEPAGE_437 is not set +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=y +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +# CONFIG_NLS_UTF8 is not set + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Graphics support +# +CONFIG_FB=y +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set +CONFIG_FB_PXA=y +# CONFIG_FB_PXA_PARAMETERS is not set +# CONFIG_FB_VIRTUAL is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y + +# +# Logo configuration +# +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# Misc devices +# + +# +# USB support +# +# CONFIG_USB is not set +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# Kernel hacking +# +CONFIG_DEBUG_KERNEL=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_DEBUG_SLAB is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_FS is not set +CONFIG_FRAME_POINTER=y +CONFIG_DEBUG_USER=y +# CONFIG_DEBUG_WAITQ is not set +CONFIG_DEBUG_ERRORS=y +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +# CONFIG_CRYPTO is not set + +# +# Hardware crypto devices +# + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y diff --git a/arch/arm/mach-pxa/idp.c b/arch/arm/mach-pxa/idp.c index 4333a0f19b32..c5a66bf4d3d5 100644 --- a/arch/arm/mach-pxa/idp.c +++ b/arch/arm/mach-pxa/idp.c @@ -10,13 +10,16 @@ * 2001-09-13: Cliff Brake <cbrake@accelent.com> * Initial code * - * Expected command line: mem=32M initrd=0xa1000000,4M root=/dev/ram ramdisk=8192 + * 2005-02-15: Cliff Brake <cliff.brake@gmail.com> + * <http://www.vibren.com> <http://bec-systems.com> + * Updated for 2.6 kernel + * */ -#include <linux/kernel.h> + #include <linux/init.h> -#include <linux/major.h> -#include <linux/fs.h> #include <linux/interrupt.h> +#include <linux/device.h> +#include <linux/fb.h> #include <asm/setup.h> #include <asm/memory.h> @@ -29,68 +32,133 @@ #include <asm/arch/pxa-regs.h> #include <asm/arch/idp.h> +#include <asm/arch/pxafb.h> +#include <asm/arch/bitfield.h> +#include <asm/arch/mmc.h> #include "generic.h" -#ifndef PXA_IDP_REV02 -/* shadow registers for write only registers */ -unsigned int idp_cpld_led_control_shadow = 0x1; -unsigned int idp_cpld_periph_pwr_shadow = 0xd; -unsigned int ipd_cpld_cir_shadow = 0; -unsigned int idp_cpld_kb_col_high_shadow = 0; -unsigned int idp_cpld_kb_col_low_shadow = 0; -unsigned int idp_cpld_pccard_en_shadow = 0xC3; -unsigned int idp_cpld_gpioh_dir_shadow = 0; -unsigned int idp_cpld_gpioh_value_shadow = 0; -unsigned int idp_cpld_gpiol_dir_shadow = 0; -unsigned int idp_cpld_gpiol_value_shadow = 0; - -/* - * enable all LCD signals -- they should still be on - * write protect flash - * enable all serial port transceivers +/* TODO: + * - add pxa2xx_audio_ops_t device structure + * - Ethernet interrupt */ -unsigned int idp_control_port_shadow = ((0x7 << 21) | /* LCD power */ - (0x1 << 19) | /* disable flash write enable */ - (0x7 << 9)); /* enable serial port transeivers */ +static struct resource smc91x_resources[] = { + [0] = { + .start = (IDP_ETH_PHYS + 0x300), + .end = (IDP_ETH_PHYS + 0xfffff), + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_GPIO(4), + .end = IRQ_GPIO(4), + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; + +static void idp_backlight_power(int on) +{ + if (on) { + IDP_CPLD_LCD |= (1<<1); + } else { + IDP_CPLD_LCD &= ~(1<<1); + } +} + +static void idp_vlcd(int on) +{ + if (on) { + IDP_CPLD_LCD |= (1<<2); + } else { + IDP_CPLD_LCD &= ~(1<<2); + } +} + +static void idp_lcd_power(int on) +{ + if (on) { + IDP_CPLD_LCD |= (1<<0); + } else { + IDP_CPLD_LCD &= ~(1<<0); + } + + /* call idp_vlcd for now as core driver does not support + * both power and vlcd hooks. Note, this is not technically + * the correct sequence, but seems to work. Disclaimer: + * this may eventually damage the display. + */ + + idp_vlcd(on); +} + +static struct pxafb_mach_info sharp_lm8v31 __initdata = { + .pixclock = 270000, + .xres = 640, + .yres = 480, + .bpp = 16, + .hsync_len = 1, + .left_margin = 3, + .right_margin = 3, + .vsync_len = 1, + .upper_margin = 0, + .lower_margin = 0, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, + .cmap_greyscale = 0, + .cmap_inverse = 0, + .cmap_static = 0, + .lccr0 = LCCR0_SDS, + .lccr3 = LCCR3_PCP | LCCR3_Acb(255), + .pxafb_backlight_power = &idp_backlight_power, + .pxafb_lcd_power = &idp_lcd_power +}; -#endif +static int idp_mci_init(struct device *dev, irqreturn_t (*idp_detect_int)(int, void *, struct pt_regs *), void *data) +{ + /* setup GPIO for PXA25x MMC controller */ + pxa_gpio_mode(GPIO6_MMCCLK_MD); + pxa_gpio_mode(GPIO8_MMCCS0_MD); + + return 0; +} + +static struct pxamci_platform_data idp_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34, + .init = idp_mci_init, +}; static void __init idp_init(void) { printk("idp_init()\n"); + + platform_device_register(&smc91x_device); + //platform_device_register(&mst_audio_device); + set_pxa_fb_info(&sharp_lm8v31); + pxa_set_mci_info(&idp_mci_platform_data); } static void __init idp_init_irq(void) { + pxa_init_irq(); + + set_irq_type(TOUCH_PANEL_IRQ, TOUCH_PANEL_IRQ_EDGE); } static struct map_desc idp_io_desc[] __initdata = { /* virtual physical length type */ - -#ifndef PXA_IDP_REV02 - { IDP_CTRL_PORT_BASE, - IDP_CTRL_PORT_PHYS, - IDP_CTRL_PORT_SIZE, - MT_DEVICE }, -#endif - - { IDP_IDE_BASE, - IDP_IDE_PHYS, - IDP_IDE_SIZE, - MT_DEVICE }, - { IDP_ETH_BASE, - IDP_ETH_PHYS, - IDP_ETH_SIZE, - MT_DEVICE }, - { IDP_COREVOLT_BASE, + { IDP_COREVOLT_VIRT, IDP_COREVOLT_PHYS, IDP_COREVOLT_SIZE, MT_DEVICE }, - { IDP_CPLD_BASE, + { IDP_CPLD_VIRT, IDP_CPLD_PHYS, IDP_CPLD_SIZE, MT_DEVICE } @@ -101,8 +169,6 @@ static void __init idp_map_io(void) pxa_map_io(); iotable_init(idp_io_desc, ARRAY_SIZE(idp_io_desc)); - set_irq_type(TOUCH_PANEL_IRQ, TOUCH_PANEL_IRQ_EDGE); - // serial ports 2 & 3 pxa_gpio_mode(GPIO42_BTRXD_MD); pxa_gpio_mode(GPIO43_BTTXD_MD); @@ -114,8 +180,8 @@ static void __init idp_map_io(void) } -MACHINE_START(PXA_IDP, "Accelent Xscale IDP") - MAINTAINER("Accelent Systems Inc.") +MACHINE_START(PXA_IDP, "Vibren PXA255 IDP") + MAINTAINER("Vibren Technologies") BOOT_MEM(0xa0000000, 0x40000000, io_p2v(0x40000000)) MAPIO(idp_map_io) INITIRQ(idp_init_irq) diff --git a/arch/arm/mach-pxa/leds-idp.c b/arch/arm/mach-pxa/leds-idp.c index adb108c6c2bb..18d414c5db8d 100644 --- a/arch/arm/mach-pxa/leds-idp.c +++ b/arch/arm/mach-pxa/leds-idp.c @@ -19,6 +19,7 @@ #include <asm/leds.h> #include <asm/system.h> +#include <asm/arch/pxa-regs.h> #include <asm/arch/idp.h> #include "leds.h" diff --git a/include/asm-arm/arch-pxa/idp.h b/include/asm-arm/arch-pxa/idp.h index e496ed7f496a..fed385632025 100644 --- a/include/asm-arm/arch-pxa/idp.h +++ b/include/asm-arm/arch-pxa/idp.h @@ -10,20 +10,20 @@ * 2001-09-13: Cliff Brake <cbrake@accelent.com> * Initial code * + * 2005-02-15: Cliff Brake <cliff.brake@gmail.com> + * <http://www.vibren.com> <http://bec-systems.com> + * Changes for 2.6 kernel. */ #include <linux/config.h> /* * Note: this file must be safe to include in assembly files + * + * Support for the Vibren PXA255 IDP requires rev04 or later + * IDP hardware. */ -/* comment out following if you have a rev01 board */ -#define PXA_IDP_REV02 1 - -#ifdef PXA_IDP_REV02 -//Use this as well for 0017-x004 and greater pcb's: -#define PXA_IDP_REV04 1 #define IDP_FLASH_PHYS (PXA_CS0_PHYS) #define IDP_ALT_FLASH_PHYS (PXA_CS1_PHYS) @@ -38,26 +38,18 @@ * virtual memory map */ -#define IDP_IDE_BASE (0xf0000000) -#define IDP_IDE_SIZE (1*1024*1024) -#define IDE_REG_STRIDE 4 - -#define IDP_ETH_BASE (IDP_IDE_BASE + IDP_IDE_SIZE) -#define IDP_ETH_SIZE (1*1024*1024) -#define ETH_BASE IDP_ETH_BASE //smc9194 driver compatibility issue - -#define IDP_COREVOLT_BASE (IDP_ETH_BASE + IDP_ETH_SIZE) +#define IDP_COREVOLT_VIRT (0xf0000000) #define IDP_COREVOLT_SIZE (1*1024*1024) -#define IDP_CPLD_BASE (IDP_COREVOLT_BASE + IDP_COREVOLT_SIZE) +#define IDP_CPLD_VIRT (IDP_COREVOLT_VIRT + IDP_COREVOLT_SIZE) #define IDP_CPLD_SIZE (1*1024*1024) -#if (IDP_CPLD_BASE + IDP_CPLD_SIZE) > 0xfc000000 +#if (IDP_CPLD_VIRT + IDP_CPLD_SIZE) > 0xfc000000 #error Your custom IO space is getting a bit large !! #endif -#define CPLD_P2V(x) ((x) - IDP_CPLD_PHYS + IDP_CPLD_BASE) -#define CPLD_V2P(x) ((x) - IDP_CPLD_BASE + IDP_CPLD_PHYS) +#define CPLD_P2V(x) ((x) - IDP_CPLD_PHYS + IDP_CPLD_VIRT) +#define CPLD_V2P(x) ((x) - IDP_CPLD_VIRT + IDP_CPLD_PHYS) #ifndef __ASSEMBLY__ # define __CPLD_REG(x) (*((volatile unsigned long *)CPLD_P2V(x))) @@ -65,7 +57,7 @@ # define __CPLD_REG(x) CPLD_P2V(x) #endif -/* board level registers in the CPLD: (offsets from CPLD_BASE) */ +/* board level registers in the CPLD: (offsets from CPLD_VIRT) */ #define _IDP_CPLD_REV (IDP_CPLD_PHYS + 0x00) #define _IDP_CPLD_PERIPH_PWR (IDP_CPLD_PHYS + 0x04) @@ -142,32 +134,10 @@ #define PCC_DETECT(x) (GPLR(7 + (x)) & GPIO_bit(7 + (x))) -/* - * Macros for LCD Driver - */ - -#ifdef CONFIG_FB_PXA - -#define FB_BACKLIGHT_ON() (IDP_CPLD_LCD |= (1<<1)) -#define FB_BACKLIGHT_OFF() (IDP_CPLD_LCD &= ~(1<<1)) - -#define FB_PWR_ON() (IDP_CPLD_LCD |= (1<< 0)) -#define FB_PWR_OFF() (IDP_CPLD_LCD &= ~(1<<0)) - -#define FB_VLCD_ON() (IDP_CPLD_LCD |= (1<<2)) -#define FB_VLCD_OFF() (IDP_CPLD_LCD &= ~(1<<2)) - -#endif - /* A listing of interrupts used by external hardware devices */ -#ifdef PXA_IDP_REV04 #define TOUCH_PANEL_IRQ IRQ_GPIO(5) #define IDE_IRQ IRQ_GPIO(21) -#else -#define TOUCH_PANEL_IRQ IRQ_GPIO(21) -#define IDE_IRQ IRQ_GPIO(5) -#endif #define TOUCH_PANEL_IRQ_EDGE IRQT_FALLING @@ -196,7 +166,7 @@ #define IDP_LEDS_MASK (IDP_HB_LED | IDP_BUSY_LED) -#define IDP_WRITE_LEDS(value) (IDP_CPLD_LED_CONTROL = (IDP_CPLD_LED_CONTROL & (~(IDP_LEDS_MASK)) | value)) +#define IDP_WRITE_LEDS(value) (IDP_CPLD_LED_CONTROL = (IDP_CPLD_LED_CONTROL & ((~(IDP_LEDS_MASK)) | value))) /* * macros for MTD driver @@ -229,238 +199,4 @@ inputs = (IDP_CPLD_KB_ROW & 0x7f);\ } -#else - -/* - * following is for rev01 boards only - */ - -#define IDP_FLASH_PHYS (PXA_CS0_PHYS) -#define IDP_ALT_FLASH_PHYS (PXA_CS1_PHYS) -#define IDP_MEDIAQ_PHYS (PXA_CS3_PHYS) -#define IDP_CTRL_PORT_PHYS (PXA_CS5_PHYS + 0x02C00000) -#define IDP_IDE_PHYS (PXA_CS5_PHYS + 0x03000000) -#define IDP_ETH_PHYS (PXA_CS5_PHYS + 0x03400000) -#define IDP_COREVOLT_PHYS (PXA_CS5_PHYS + 0x03800000) -#define IDP_CPLD_PHYS (PXA_CS5_PHYS + 0x03C00000) - - -/* - * virtual memory map - */ - -#define IDP_CTRL_PORT_BASE (0xf0000000) -#define IDP_CTRL_PORT_SIZE (1*1024*1024) - -#define IDP_IDE_BASE (IDP_CTRL_PORT_BASE + IDP_CTRL_PORT_SIZE) -#define IDP_IDE_SIZE (1*1024*1024) -#define IDP_ETH_BASE (IDP_IDE_BASE + IDP_IDE_SIZE) -#define IDP_ETH_SIZE (1*1024*1024) - -#define IDP_COREVOLT_BASE (IDP_ETH_BASE + IDP_ETH_SIZE) -#define IDP_COREVOLT_SIZE (1*1024*1024) - -#define IDP_CPLD_BASE (IDP_COREVOLT_BASE + IDP_COREVOLT_SIZE) -#define IDP_CPLD_SIZE (1*1024*1024) - -#if (IDP_CPLD_BASE + IDP_CPLD_SIZE) > 0xfc000000 -#error Your custom IO space is getting a bit large !! -#endif - -#define CPLD_P2V(x) ((x) - IDP_CPLD_PHYS + IDP_CPLD_BASE) -#define CPLD_V2P(x) ((x) - IDP_CPLD_BASE + IDP_CPLD_PHYS) - -#ifndef __ASSEMBLY__ -# define __CPLD_REG(x) (*((volatile unsigned long *)CPLD_P2V(x))) -#else -# define __CPLD_REG(x) CPLD_P2V(x) -#endif - -/* board level registers in the CPLD: (offsets from CPLD_BASE) */ - -#define _IDP_CPLD_LED_CONTROL (IDP_CPLD_PHYS + 0x00) -#define _IDP_CPLD_PERIPH_PWR (IDP_CPLD_PHYS + 0x04) -#define _IDP_CPLD_CIR (IDP_CPLD_PHYS + 0x08) -#define _IDP_CPLD_KB_COL_HIGH (IDP_CPLD_PHYS + 0x0C) -#define _IDP_CPLD_KB_COL_LOW (IDP_CPLD_PHYS + 0x10) -#define _IDP_CPLD_PCCARD_EN (IDP_CPLD_PHYS + 0x14) -#define _IDP_CPLD_GPIOH_DIR (IDP_CPLD_PHYS + 0x18) -#define _IDP_CPLD_GPIOH_VALUE (IDP_CPLD_PHYS + 0x1C) -#define _IDP_CPLD_GPIOL_DIR (IDP_CPLD_PHYS + 0x20) -#define _IDP_CPLD_GPIOL_VALUE (IDP_CPLD_PHYS + 0x24) -#define _IDP_CPLD_MISC (IDP_CPLD_PHYS + 0x28) -#define _IDP_CPLD_PCCARD0_STATUS (IDP_CPLD_PHYS + 0x2C) -#define _IDP_CPLD_PCCARD1_STATUS (IDP_CPLD_PHYS + 0x30) - -/* FPGA register virtual addresses */ -#define IDP_CPLD_LED_CONTROL __CPLD_REG(_IDP_CPLD_LED_CONTROL) /* write only */ -#define IDP_CPLD_PERIPH_PWR __CPLD_REG(_IDP_CPLD_PERIPH_PWR) /* write only */ -#define IDP_CPLD_CIR __CPLD_REG(_IDP_CPLD_CIR) /* write only */ -#define IDP_CPLD_KB_COL_HIGH __CPLD_REG(_IDP_CPLD_KB_COL_HIGH) /* write only */ -#define IDP_CPLD_KB_COL_LOW __CPLD_REG(_IDP_CPLD_KB_COL_LOW) /* write only */ -#define IDP_CPLD_PCCARD_EN __CPLD_REG(_IDP_CPLD_PCCARD_EN) /* write only */ -#define IDP_CPLD_GPIOH_DIR __CPLD_REG(_IDP_CPLD_GPIOH_DIR) /* write only */ -#define IDP_CPLD_GPIOH_VALUE __CPLD_REG(_IDP_CPLD_GPIOH_VALUE) /* write only */ -#define IDP_CPLD_GPIOL_DIR __CPLD_REG(_IDP_CPLD_GPIOL_DIR) /* write only */ -#define IDP_CPLD_GPIOL_VALUE __CPLD_REG(_IDP_CPLD_GPIOL_VALUE) /* write only */ -#define IDP_CPLD_MISC __CPLD_REG(_IDP_CPLD_MISC) /* read only */ -#define IDP_CPLD_PCCARD0_STATUS __CPLD_REG(_IDP_CPLD_PCCARD0_STATUS) /* read only */ -#define IDP_CPLD_PCCARD1_STATUS __CPLD_REG(_IDP_CPLD_PCCARD1_STATUS) /* read only */ - - -#ifndef __ASSEMBLY__ - -/* shadow registers for write only registers */ -extern unsigned int idp_cpld_led_control_shadow; -extern unsigned int idp_cpld_periph_pwr_shadow; -extern unsigned int idp_cpld_cir_shadow; -extern unsigned int idp_cpld_kb_col_high_shadow; -extern unsigned int idp_cpld_kb_col_low_shadow; -extern unsigned int idp_cpld_pccard_en_shadow; -extern unsigned int idp_cpld_gpioh_dir_shadow; -extern unsigned int idp_cpld_gpioh_value_shadow; -extern unsigned int idp_cpld_gpiol_dir_shadow; -extern unsigned int idp_cpld_gpiol_value_shadow; - -extern unsigned int idp_control_port_shadow; - -/* - * macros to write to write only register - * - * none of these macros are protected from - * multiple drivers using them in interrupt context. - */ - -#define WRITE_IDP_CPLD_LED_CONTROL(value, mask) \ -{\ - idp_cpld_led_control_shadow = (((value & mask) | (idp_cpld_led_control_shadow & ~mask)));\ - IDP_CPLD_LED_CONTROL = idp_cpld_led_control_shadow;\ -} -#define WRITE_IDP_CPLD_PERIPH_PWR(value, mask) \ -{\ - idp_cpld_periph_pwr_shadow = ((value & mask) | (idp_cpld_periph_pwr_shadow & ~mask));\ - IDP_CPLD_PERIPH_PWR = idp_cpld_periph_pwr_shadow;\ -} -#define WRITE_IDP_CPLD_CIR(value, mask) \ -{\ - idp_cpld_cir_shadow = ((value & mask) | (idp_cpld_cir_shadow & ~mask));\ - IDP_CPLD_CIR = idp_cpld_cir_shadow;\ -} -#define WRITE_IDP_CPLD_KB_COL_HIGH(value, mask) \ -{\ - idp_cpld_kb_col_high_shadow = ((value & mask) | (idp_cpld_kb_col_high_shadow & ~mask));\ - IDP_CPLD_KB_COL_HIGH = idp_cpld_kb_col_high_shadow;\ -} -#define WRITE_IDP_CPLD_KB_COL_LOW(value, mask) \ -{\ - idp_cpld_kb_col_low_shadow = ((value & mask) | (idp_cpld_kb_col_low_shadow & ~mask));\ - IDP_CPLD_KB_COL_LOW = idp_cpld_kb_col_low_shadow;\ -} -#define WRITE_IDP_CPLD_PCCARD_EN(value, mask) \ -{\ - idp_cpld_ = ((value & mask) | (idp_cpld_led_control_shadow & ~mask));\ - IDP_CPLD_LED_CONTROL = idp_cpld_led_control_shadow;\ -} -#define WRITE_IDP_CPLD_GPIOH_DIR(value, mask) \ -{\ - idp_cpld_gpioh_dir_shadow = ((value & mask) | (idp_cpld_gpioh_dir_shadow & ~mask));\ - IDP_CPLD_GPIOH_DIR = idp_cpld_gpioh_dir_shadow;\ -} -#define WRITE_IDP_CPLD_GPIOH_VALUE(value, mask) \ -{\ - idp_cpld_gpioh_value_shadow = ((value & mask) | (idp_cpld_gpioh_value_shadow & ~mask));\ - IDP_CPLD_GPIOH_VALUE = idp_cpld_gpioh_value_shadow;\ -} -#define WRITE_IDP_CPLD_GPIOL_DIR(value, mask) \ -{\ - idp_cpld_gpiol_dir_shadow = ((value & mask) | (idp_cpld_gpiol_dir_shadow & ~mask));\ - IDP_CPLD_GPIOL_DIR = idp_cpld_gpiol_dir_shadow;\ -} -#define WRITE_IDP_CPLD_GPIOL_VALUE(value, mask) \ -{\ - idp_cpld_gpiol_value_shadow = ((value & mask) | (idp_cpld_gpiol_value_shadow & ~mask));\ - IDP_CPLD_GPIOL_VALUE = idp_cpld_gpiol_value_shadow;\ -} - -#define WRITE_IDP_CONTROL_PORT(value, mask) \ -{\ - idp_control_port_shadow = ((value & mask) | (idp_control_port_shadow & ~mask));\ - (*((volatile unsigned long *)IDP_CTRL_PORT_BASE)) = idp_control_port_shadow;\ -} - -#endif - -/* A listing of interrupts used by external hardware devices */ - -#define TOUCH_PANEL_IRQ IRQ_GPIO(21) -#define TOUCH_PANEL_IRQ_EGDE IRQT_FALLING - -#define ETHERNET_IRQ IRQ_GPIO(4) -#define ETHERNET_IRQ_EDGE IRQT_RISING - -/* - * Bit masks for various registers - */ - - -/* control port */ -#define IDP_CONTROL_PORT_PCSLOT0_0 (1 << 0) -#define IDP_CONTROL_PORT_PCSLOT0_1 (1 << 1) -#define IDP_CONTROL_PORT_PCSLOT0_2 (1 << 2) -#define IDP_CONTROL_PORT_PCSLOT0_3 (1 << 3) -#define IDP_CONTROL_PORT_PCSLOT1_1 (1 << 4) -#define IDP_CONTROL_PORT_PCSLOT1_2 (1 << 5) -#define IDP_CONTROL_PORT_PCSLOT1_3 (1 << 6) -#define IDP_CONTROL_PORT_PCSLOT1_4 (1 << 7) -#define IDP_CONTROL_PORT_SERIAL1_EN (1 << 9) -#define IDP_CONTROL_PORT_SERIAL2_EN (1 << 10) -#define IDP_CONTROL_PORT_SERIAL3_EN (1 << 11) -#define IDP_CONTROL_PORT_IRDA_FIR (1 << 12) -#define IDP_CONTROL_PORT_IRDA_M0 (1 << 13) -#define IDP_CONTROL_PORT_IRDA_M1 (1 << 14) -#define IDP_CONTROL_PORT_I2S_PWR (1 << 15) -#define IDP_CONTROL_PORT_FLASH_WP (1 << 19) -#define IDP_CONTROL_PORT_MILL_EN (1 << 20) -#define IDP_CONTROL_PORT_LCD_PWR (1 << 21) -#define IDP_CONTROL_PORT_LCD_BKLEN (1 << 22) -#define IDP_CONTROL_PORT_LCD_ENAVLCD (1 << 23) - -/* - * Macros for LCD Driver - */ - -#ifdef CONFIG_FB_PXA - -#define FB_BACKLIGHT_ON() WRITE_IDP_CONTROL_PORT(IDP_CONTROL_PORT_LCD_BKLEN, IDP_CONTROL_PORT_LCD_BKLEN) -#define FB_BACKLIGHT_OFF() WRITE_IDP_CONTROL_PORT(0, IDP_CONTROL_PORT_LCD_BKLEN) - -#define FB_PWR_ON() WRITE_IDP_CONTROL_PORT(IDP_CONTROL_PORT_LCD_PWR, IDP_CONTROL_PORT_LCD_PWR) -#define FB_PWR_OFF() WRITE_IDP_CONTROL_PORT(0, IDP_CONTROL_PORT_LCD_PWR) - -#define FB_VLCD_ON() WRITE_IDP_CONTROL_PORT(IDP_CONTROL_PORT_LCD_ENAVLCD, IDP_CONTROL_PORT_LCD_ENAVLCD) -#define FB_VLCD_OFF() WRITE_IDP_CONTROL_PORT(0, IDP_CONTROL_PORT_LCD_ENAVLCD) - -#endif - - -/* - * Macros for LED Driver - */ - -/* leds 0 = ON */ -#define IDP_HB_LED 0x1 -#define IDP_BUSY_LED 0x2 - -#define IDP_LEDS_MASK (IDP_HB_LED | IDP_BUSY_LED) - -#define IDP_WRITE_LEDS(value) WRITE_IDP_CPLD_LED_CONTROL(value, IDP_LEDS_MASK) - -/* - * macros for MTD driver - */ - -#define FLASH_WRITE_PROTECT_DISABLE() WRITE_IDP_CONTROL_PORT(0, IDP_CONTROL_PORT_FLASH_WP) -#define FLASH_WRITE_PROTECT_ENABLE() WRITE_IDP_CONTROL_PORT(IDP_CONTROL_PORT_FLASH_WP, IDP_CONTROL_PORT_FLASH_WP) - -#endif |