summaryrefslogtreecommitdiff
path: root/Documentation
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation')
-rw-r--r--Documentation/admin-guide/devices.txt12
-rw-r--r--Documentation/devicetree/bindings/serial/samsung_uart.yaml14
-rw-r--r--Documentation/driver-api/serial/cyclades_z.rst11
-rw-r--r--Documentation/driver-api/serial/index.rst1
-rw-r--r--Documentation/driver-api/serial/rocket.rst185
-rw-r--r--Documentation/process/magic-number.rst4
-rw-r--r--Documentation/translations/it_IT/process/magic-number.rst4
-rw-r--r--Documentation/translations/zh_CN/process/magic-number.rst4
-rw-r--r--Documentation/userspace-api/ioctl/ioctl-number.rst1
9 files changed, 14 insertions, 222 deletions
diff --git a/Documentation/admin-guide/devices.txt b/Documentation/admin-guide/devices.txt
index 63fd4e6a014b..ef41f77cb979 100644
--- a/Documentation/admin-guide/devices.txt
+++ b/Documentation/admin-guide/devices.txt
@@ -289,7 +289,7 @@
152 = /dev/kpoll Kernel Poll Driver
153 = /dev/mergemem Memory merge device
154 = /dev/pmu Macintosh PowerBook power manager
- 155 = /dev/isictl MultiTech ISICom serial control
+ 155 =
156 = /dev/lcd Front panel LCD display
157 = /dev/ac Applicom Intl Profibus card
158 = /dev/nwbutton Netwinder external button
@@ -477,11 +477,6 @@
18 block Sanyo CD-ROM
0 = /dev/sjcd Sanyo CD-ROM
- 19 char Cyclades serial card
- 0 = /dev/ttyC0 First Cyclades port
- ...
- 31 = /dev/ttyC31 32nd Cyclades port
-
19 block "Double" compressed disk
0 = /dev/double0 First compressed disk
...
@@ -493,11 +488,6 @@
See the Double documentation for the meaning of the
mirror devices.
- 20 char Cyclades serial card - alternate devices
- 0 = /dev/cub0 Callout device for ttyC0
- ...
- 31 = /dev/cub31 Callout device for ttyC31
-
20 block Hitachi CD-ROM (under development)
0 = /dev/hitcd Hitachi CD-ROM
diff --git a/Documentation/devicetree/bindings/serial/samsung_uart.yaml b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
index 21ee627b2ced..4f98a3896b3a 100644
--- a/Documentation/devicetree/bindings/serial/samsung_uart.yaml
+++ b/Documentation/devicetree/bindings/serial/samsung_uart.yaml
@@ -4,7 +4,7 @@
$id: http://devicetree.org/schemas/serial/samsung_uart.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#
-title: Samsung S3C, S5P and Exynos SoC UART Controller
+title: Samsung S3C, S5P, Exynos, and S5L (Apple SoC) SoC UART Controller
maintainers:
- Krzysztof Kozlowski <krzk@kernel.org>
@@ -19,6 +19,7 @@ properties:
compatible:
items:
- enum:
+ - apple,s5l-uart
- samsung,s3c2410-uart
- samsung,s3c2412-uart
- samsung,s3c2440-uart
@@ -51,6 +52,16 @@ properties:
- pattern: '^clk_uart_baud[0-3]$'
- pattern: '^clk_uart_baud[0-3]$'
+ dmas:
+ items:
+ - description: DMA controller phandle and request line for RX
+ - description: DMA controller phandle and request line for TX
+
+ dma-names:
+ items:
+ - const: rx
+ - const: tx
+
interrupts:
description: RX interrupt and optionally TX interrupt.
minItems: 1
@@ -96,6 +107,7 @@ allOf:
compatible:
contains:
enum:
+ - apple,s5l-uart
- samsung,exynos4210-uart
then:
properties:
diff --git a/Documentation/driver-api/serial/cyclades_z.rst b/Documentation/driver-api/serial/cyclades_z.rst
deleted file mode 100644
index 532ff67e2f1c..000000000000
--- a/Documentation/driver-api/serial/cyclades_z.rst
+++ /dev/null
@@ -1,11 +0,0 @@
-================
-Cyclades-Z notes
-================
-
-The Cyclades-Z must have firmware loaded onto the card before it will
-operate. This operation should be performed during system startup,
-
-The firmware, loader program and the latest device driver code are
-available from Cyclades at
-
- ftp://ftp.cyclades.com/pub/cyclades/cyclades-z/linux/
diff --git a/Documentation/driver-api/serial/index.rst b/Documentation/driver-api/serial/index.rst
index 33ad10d05b26..21351b8c95a4 100644
--- a/Documentation/driver-api/serial/index.rst
+++ b/Documentation/driver-api/serial/index.rst
@@ -17,7 +17,6 @@ Serial drivers
.. toctree::
:maxdepth: 1
- cyclades_z
moxa-smartio
n_gsm
rocket
diff --git a/Documentation/driver-api/serial/rocket.rst b/Documentation/driver-api/serial/rocket.rst
deleted file mode 100644
index 23761eae4282..000000000000
--- a/Documentation/driver-api/serial/rocket.rst
+++ /dev/null
@@ -1,185 +0,0 @@
-================================================
-Comtrol(tm) RocketPort(R)/RocketModem(TM) Series
-================================================
-
-Device Driver for the Linux Operating System
-============================================
-
-Product overview
-----------------
-
-This driver provides a loadable kernel driver for the Comtrol RocketPort
-and RocketModem PCI boards. These boards provide, 2, 4, 8, 16, or 32
-high-speed serial ports or modems. This driver supports up to a combination
-of four RocketPort or RocketModems boards in one machine simultaneously.
-This file assumes that you are using the RocketPort driver which is
-integrated into the kernel sources.
-
-The driver can also be installed as an external module using the usual
-"make;make install" routine. This external module driver, obtainable
-from the Comtrol website listed below, is useful for updating the driver
-or installing it into kernels which do not have the driver configured
-into them. Installations instructions for the external module
-are in the included README and HW_INSTALL files.
-
-RocketPort ISA and RocketModem II PCI boards currently are only supported by
-this driver in module form.
-
-The RocketPort ISA board requires I/O ports to be configured by the DIP
-switches on the board. See the section "ISA Rocketport Boards" below for
-information on how to set the DIP switches.
-
-You pass the I/O port to the driver using the following module parameters:
-
-board1:
- I/O port for the first ISA board
-board2:
- I/O port for the second ISA board
-board3:
- I/O port for the third ISA board
-board4:
- I/O port for the fourth ISA board
-
-There is a set of utilities and scripts provided with the external driver
-(downloadable from http://www.comtrol.com) that ease the configuration and
-setup of the ISA cards.
-
-The RocketModem II PCI boards require firmware to be loaded into the card
-before it will function. The driver has only been tested as a module for this
-board.
-
-Installation Procedures
------------------------
-
-RocketPort/RocketModem PCI cards require no driver configuration, they are
-automatically detected and configured.
-
-The RocketPort driver can be installed as a module (recommended) or built
-into the kernel. This is selected, as for other drivers, through the `make config`
-command from the root of the Linux source tree during the kernel build process.
-
-The RocketPort/RocketModem serial ports installed by this driver are assigned
-device major number 46, and will be named /dev/ttyRx, where x is the port number
-starting at zero (ex. /dev/ttyR0, /devttyR1, ...). If you have multiple cards
-installed in the system, the mapping of port names to serial ports is displayed
-in the system log at /var/log/messages.
-
-If installed as a module, the module must be loaded. This can be done
-manually by entering "modprobe rocket". To have the module loaded automatically
-upon system boot, edit a `/etc/modprobe.d/*.conf` file and add the line
-"alias char-major-46 rocket".
-
-In order to use the ports, their device names (nodes) must be created with mknod.
-This is only required once, the system will retain the names once created. To
-create the RocketPort/RocketModem device names, use the command
-"mknod /dev/ttyRx c 46 x" where x is the port number starting at zero.
-
-For example::
-
- > mknod /dev/ttyR0 c 46 0
- > mknod /dev/ttyR1 c 46 1
- > mknod /dev/ttyR2 c 46 2
-
-The Linux script MAKEDEV will create the first 16 ttyRx device names (nodes)
-for you::
-
- >/dev/MAKEDEV ttyR
-
-ISA Rocketport Boards
----------------------
-
-You must assign and configure the I/O addresses used by the ISA Rocketport
-card before installing and using it. This is done by setting a set of DIP
-switches on the Rocketport board.
-
-
-Setting the I/O address
------------------------
-
-Before installing RocketPort(R) or RocketPort RA boards, you must find
-a range of I/O addresses for it to use. The first RocketPort card
-requires a 68-byte contiguous block of I/O addresses, starting at one
-of the following: 0x100h, 0x140h, 0x180h, 0x200h, 0x240h, 0x280h,
-0x300h, 0x340h, 0x380h. This I/O address must be reflected in the DIP
-switches of *all* of the Rocketport cards.
-
-The second, third, and fourth RocketPort cards require a 64-byte
-contiguous block of I/O addresses, starting at one of the following
-I/O addresses: 0x100h, 0x140h, 0x180h, 0x1C0h, 0x200h, 0x240h, 0x280h,
-0x2C0h, 0x300h, 0x340h, 0x380h, 0x3C0h. The I/O address used by the
-second, third, and fourth Rocketport cards (if present) are set via
-software control. The DIP switch settings for the I/O address must be
-set to the value of the first Rocketport cards.
-
-In order to distinguish each of the card from the others, each card
-must have a unique board ID set on the dip switches. The first
-Rocketport board must be set with the DIP switches corresponding to
-the first board, the second board must be set with the DIP switches
-corresponding to the second board, etc. IMPORTANT: The board ID is
-the only place where the DIP switch settings should differ between the
-various Rocketport boards in a system.
-
-The I/O address range used by any of the RocketPort cards must not
-conflict with any other cards in the system, including other
-RocketPort cards. Below, you will find a list of commonly used I/O
-address ranges which may be in use by other devices in your system.
-On a Linux system, "cat /proc/ioports" will also be helpful in
-identifying what I/O addresses are being used by devices on your
-system.
-
-Remember, the FIRST RocketPort uses 68 I/O addresses. So, if you set it
-for 0x100, it will occupy 0x100 to 0x143. This would mean that you
-CAN NOT set the second, third or fourth board for address 0x140 since
-the first 4 bytes of that range are used by the first board. You would
-need to set the second, third, or fourth board to one of the next available
-blocks such as 0x180.
-
-RocketPort and RocketPort RA SW1 Settings::
-
- +-------------------------------+
- | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 |
- +-------+-------+---------------+
- | Unused| Card | I/O Port Block|
- +-------------------------------+
-
- DIP Switches DIP Switches
- 7 8 6 5
- =================== ===================
- On On UNUSED, MUST BE ON. On On First Card <==== Default
- On Off Second Card
- Off On Third Card
- Off Off Fourth Card
-
- DIP Switches I/O Address Range
- 4 3 2 1 Used by the First Card
- =====================================
- On Off On Off 100-143
- On Off Off On 140-183
- On Off Off Off 180-1C3 <==== Default
- Off On On Off 200-243
- Off On Off On 240-283
- Off On Off Off 280-2C3
- Off Off On Off 300-343
- Off Off Off On 340-383
- Off Off Off Off 380-3C3
-
-Reporting Bugs
---------------
-
-For technical support, please provide the following
-information: Driver version, kernel release, distribution of
-kernel, and type of board you are using. Error messages and log
-printouts port configuration details are especially helpful.
-
-USA:
- :Phone: (612) 494-4100
- :FAX: (612) 494-4199
- :email: support@comtrol.com
-
-Comtrol Europe:
- :Phone: +44 (0) 1 869 323-220
- :FAX: +44 (0) 1 869 323-211
- :email: support@comtrol.co.uk
-
-Web: http://www.comtrol.com
-FTP: ftp.comtrol.com
diff --git a/Documentation/process/magic-number.rst b/Documentation/process/magic-number.rst
index fa5a62f4150c..f5ba36e96461 100644
--- a/Documentation/process/magic-number.rst
+++ b/Documentation/process/magic-number.rst
@@ -73,12 +73,10 @@ CMAGIC 0x0111 user ``include/linux/
MKISS_DRIVER_MAGIC 0x04bf mkiss_channel ``drivers/net/mkiss.h``
HDLC_MAGIC 0x239e n_hdlc ``drivers/char/n_hdlc.c``
APM_BIOS_MAGIC 0x4101 apm_user ``arch/x86/kernel/apm_32.c``
-CYCLADES_MAGIC 0x4359 cyclades_port ``include/linux/cyclades.h``
DB_MAGIC 0x4442 fc_info ``drivers/net/iph5526_novram.c``
DL_MAGIC 0x444d fc_info ``drivers/net/iph5526_novram.c``
FASYNC_MAGIC 0x4601 fasync_struct ``include/linux/fs.h``
FF_MAGIC 0x4646 fc_info ``drivers/net/iph5526_novram.c``
-ISICOM_MAGIC 0x4d54 isi_port ``include/linux/isicom.h``
PTY_MAGIC 0x5001 ``drivers/char/pty.c``
PPP_MAGIC 0x5002 ppp ``include/linux/if_pppvar.h``
SSTATE_MAGIC 0x5302 serial_state ``include/linux/serial.h``
@@ -90,14 +88,12 @@ TTY_MAGIC 0x5401 tty_struct ``include/linux/
MGSL_MAGIC 0x5401 mgsl_info ``drivers/char/synclink.c``
TTY_DRIVER_MAGIC 0x5402 tty_driver ``include/linux/tty_driver.h``
MGSLPC_MAGIC 0x5402 mgslpc_info ``drivers/char/pcmcia/synclink_cs.c``
-TTY_LDISC_MAGIC 0x5403 tty_ldisc ``include/linux/tty_ldisc.h``
USB_SERIAL_MAGIC 0x6702 usb_serial ``drivers/usb/serial/usb-serial.h``
FULL_DUPLEX_MAGIC 0x6969 ``drivers/net/ethernet/dec/tulip/de2104x.c``
USB_BLUETOOTH_MAGIC 0x6d02 usb_bluetooth ``drivers/usb/class/bluetty.c``
RFCOMM_TTY_MAGIC 0x6d02 ``net/bluetooth/rfcomm/tty.c``
USB_SERIAL_PORT_MAGIC 0x7301 usb_serial_port ``drivers/usb/serial/usb-serial.h``
CG_MAGIC 0x00090255 ufs_cylinder_group ``include/linux/ufs_fs.h``
-RPORT_MAGIC 0x00525001 r_port ``drivers/char/rocket_int.h``
LSEMAGIC 0x05091998 lse ``drivers/fc4/fc.c``
RIEBL_MAGIC 0x09051990 ``drivers/net/atarilance.c``
NBD_REQUEST_MAGIC 0x12560953 nbd_request ``include/linux/nbd.h``
diff --git a/Documentation/translations/it_IT/process/magic-number.rst b/Documentation/translations/it_IT/process/magic-number.rst
index 1af30f4228f2..e8c782d155a3 100644
--- a/Documentation/translations/it_IT/process/magic-number.rst
+++ b/Documentation/translations/it_IT/process/magic-number.rst
@@ -79,12 +79,10 @@ CMAGIC 0x0111 user ``include/linux/
MKISS_DRIVER_MAGIC 0x04bf mkiss_channel ``drivers/net/mkiss.h``
HDLC_MAGIC 0x239e n_hdlc ``drivers/char/n_hdlc.c``
APM_BIOS_MAGIC 0x4101 apm_user ``arch/x86/kernel/apm_32.c``
-CYCLADES_MAGIC 0x4359 cyclades_port ``include/linux/cyclades.h``
DB_MAGIC 0x4442 fc_info ``drivers/net/iph5526_novram.c``
DL_MAGIC 0x444d fc_info ``drivers/net/iph5526_novram.c``
FASYNC_MAGIC 0x4601 fasync_struct ``include/linux/fs.h``
FF_MAGIC 0x4646 fc_info ``drivers/net/iph5526_novram.c``
-ISICOM_MAGIC 0x4d54 isi_port ``include/linux/isicom.h``
PTY_MAGIC 0x5001 ``drivers/char/pty.c``
PPP_MAGIC 0x5002 ppp ``include/linux/if_pppvar.h``
SSTATE_MAGIC 0x5302 serial_state ``include/linux/serial.h``
@@ -96,14 +94,12 @@ TTY_MAGIC 0x5401 tty_struct ``include/linux/
MGSL_MAGIC 0x5401 mgsl_info ``drivers/char/synclink.c``
TTY_DRIVER_MAGIC 0x5402 tty_driver ``include/linux/tty_driver.h``
MGSLPC_MAGIC 0x5402 mgslpc_info ``drivers/char/pcmcia/synclink_cs.c``
-TTY_LDISC_MAGIC 0x5403 tty_ldisc ``include/linux/tty_ldisc.h``
USB_SERIAL_MAGIC 0x6702 usb_serial ``drivers/usb/serial/usb-serial.h``
FULL_DUPLEX_MAGIC 0x6969 ``drivers/net/ethernet/dec/tulip/de2104x.c``
USB_BLUETOOTH_MAGIC 0x6d02 usb_bluetooth ``drivers/usb/class/bluetty.c``
RFCOMM_TTY_MAGIC 0x6d02 ``net/bluetooth/rfcomm/tty.c``
USB_SERIAL_PORT_MAGIC 0x7301 usb_serial_port ``drivers/usb/serial/usb-serial.h``
CG_MAGIC 0x00090255 ufs_cylinder_group ``include/linux/ufs_fs.h``
-RPORT_MAGIC 0x00525001 r_port ``drivers/char/rocket_int.h``
LSEMAGIC 0x05091998 lse ``drivers/fc4/fc.c``
GDTIOCTL_MAGIC 0x06030f07 gdth_iowr_str ``drivers/scsi/gdth_ioctl.h``
RIEBL_MAGIC 0x09051990 ``drivers/net/atarilance.c``
diff --git a/Documentation/translations/zh_CN/process/magic-number.rst b/Documentation/translations/zh_CN/process/magic-number.rst
index 7bb9d4165ed3..42f0635ca70a 100644
--- a/Documentation/translations/zh_CN/process/magic-number.rst
+++ b/Documentation/translations/zh_CN/process/magic-number.rst
@@ -62,12 +62,10 @@ CMAGIC 0x0111 user ``include/linux/
MKISS_DRIVER_MAGIC 0x04bf mkiss_channel ``drivers/net/mkiss.h``
HDLC_MAGIC 0x239e n_hdlc ``drivers/char/n_hdlc.c``
APM_BIOS_MAGIC 0x4101 apm_user ``arch/x86/kernel/apm_32.c``
-CYCLADES_MAGIC 0x4359 cyclades_port ``include/linux/cyclades.h``
DB_MAGIC 0x4442 fc_info ``drivers/net/iph5526_novram.c``
DL_MAGIC 0x444d fc_info ``drivers/net/iph5526_novram.c``
FASYNC_MAGIC 0x4601 fasync_struct ``include/linux/fs.h``
FF_MAGIC 0x4646 fc_info ``drivers/net/iph5526_novram.c``
-ISICOM_MAGIC 0x4d54 isi_port ``include/linux/isicom.h``
PTY_MAGIC 0x5001 ``drivers/char/pty.c``
PPP_MAGIC 0x5002 ppp ``include/linux/if_pppvar.h``
SSTATE_MAGIC 0x5302 serial_state ``include/linux/serial.h``
@@ -79,14 +77,12 @@ TTY_MAGIC 0x5401 tty_struct ``include/linux/
MGSL_MAGIC 0x5401 mgsl_info ``drivers/char/synclink.c``
TTY_DRIVER_MAGIC 0x5402 tty_driver ``include/linux/tty_driver.h``
MGSLPC_MAGIC 0x5402 mgslpc_info ``drivers/char/pcmcia/synclink_cs.c``
-TTY_LDISC_MAGIC 0x5403 tty_ldisc ``include/linux/tty_ldisc.h``
USB_SERIAL_MAGIC 0x6702 usb_serial ``drivers/usb/serial/usb-serial.h``
FULL_DUPLEX_MAGIC 0x6969 ``drivers/net/ethernet/dec/tulip/de2104x.c``
USB_BLUETOOTH_MAGIC 0x6d02 usb_bluetooth ``drivers/usb/class/bluetty.c``
RFCOMM_TTY_MAGIC 0x6d02 ``net/bluetooth/rfcomm/tty.c``
USB_SERIAL_PORT_MAGIC 0x7301 usb_serial_port ``drivers/usb/serial/usb-serial.h``
CG_MAGIC 0x00090255 ufs_cylinder_group ``include/linux/ufs_fs.h``
-RPORT_MAGIC 0x00525001 r_port ``drivers/char/rocket_int.h``
LSEMAGIC 0x05091998 lse ``drivers/fc4/fc.c``
GDTIOCTL_MAGIC 0x06030f07 gdth_iowr_str ``drivers/scsi/gdth_ioctl.h``
RIEBL_MAGIC 0x09051990 ``drivers/net/atarilance.c``
diff --git a/Documentation/userspace-api/ioctl/ioctl-number.rst b/Documentation/userspace-api/ioctl/ioctl-number.rst
index 599bd4493944..0a7b408c0ec7 100644
--- a/Documentation/userspace-api/ioctl/ioctl-number.rst
+++ b/Documentation/userspace-api/ioctl/ioctl-number.rst
@@ -209,7 +209,6 @@ Code Seq# Include File Comments
linux/fs.h,
'X' all fs/ocfs2/ocfs_fs.h conflict!
'X' 01 linux/pktcdvd.h conflict!
-'Y' all linux/cyclades.h
'Z' 14-15 drivers/message/fusion/mptctl.h
'[' 00-3F linux/usb/tmc.h USB Test and Measurement Devices
<mailto:gregkh@linuxfoundation.org>
generated by cgit v1.3 (git 2.53.0) at 2026-03-29 07:35:29 +0000