1549 files changed, 70735 insertions, 27726 deletions

diff --git a/arch/Kconfig b/arch/Kconfig
index d1b4ffd6e085..ebe08b9186ad 100644
--- a/arch/Kconfig
+++ b/arch/Kconfig
@@ -41,6 +41,44 @@ config HOTPLUG_SMT
 config SMT_NUM_THREADS_DYNAMIC
 	bool
 
+config ARCH_SUPPORTS_SCHED_SMT
+	bool
+
+config ARCH_SUPPORTS_SCHED_CLUSTER
+	bool
+
+config ARCH_SUPPORTS_SCHED_MC
+	bool
+
+config SCHED_SMT
+	bool "SMT (Hyperthreading) scheduler support"
+	depends on ARCH_SUPPORTS_SCHED_SMT
+	default y
+	help
+	  Improves the CPU scheduler's decision making when dealing with
+	  MultiThreading at a cost of slightly increased overhead in some
+	  places. If unsure say N here.
+
+config SCHED_CLUSTER
+	bool "Cluster scheduler support"
+	depends on ARCH_SUPPORTS_SCHED_CLUSTER
+	default y
+	help
+	  Cluster scheduler support improves the CPU scheduler's decision
+	  making when dealing with machines that have clusters of CPUs.
+	  Cluster usually means a couple of CPUs which are placed closely
+	  by sharing mid-level caches, last-level cache tags or internal
+	  busses.
+
+config SCHED_MC
+	bool "Multi-Core Cache (MC) scheduler support"
+	depends on ARCH_SUPPORTS_SCHED_MC
+	default y
+	help
+	  Multi-core scheduler support improves the CPU scheduler's decision
+	  making when dealing with multi-core CPU chips at a cost of slightly
+	  increased overhead in some places. If unsure say N here.
+
 # Selected by HOTPLUG_CORE_SYNC_DEAD or HOTPLUG_CORE_SYNC_FULL
 config HOTPLUG_CORE_SYNC
 	bool
@@ -867,22 +905,26 @@ config PROPELLER_CLANG
 
 	  If unsure, say N.
 
-config ARCH_SUPPORTS_CFI_CLANG
+config ARCH_SUPPORTS_CFI
 	bool
 	help
-	  An architecture should select this option if it can support Clang's
-	  Control-Flow Integrity (CFI) checking.
+	  An architecture should select this option if it can support Kernel
+	  Control-Flow Integrity (CFI) checking (-fsanitize=kcfi).
 
 config ARCH_USES_CFI_TRAPS
 	bool
+	help
+	  An architecture should select this option if it requires the
+	  .kcfi_traps section for KCFI trap handling.
 
-config CFI_CLANG
-	bool "Use Clang's Control Flow Integrity (CFI)"
-	depends on ARCH_SUPPORTS_CFI_CLANG
+config CFI
+	bool "Use Kernel Control Flow Integrity (kCFI)"
+	default CFI_CLANG
+	depends on ARCH_SUPPORTS_CFI
 	depends on $(cc-option,-fsanitize=kcfi)
 	help
-	  This option enables Clang's forward-edge Control Flow Integrity
-	  (CFI) checking, where the compiler injects a runtime check to each
+	  This option enables forward-edge Control Flow Integrity (CFI)
+	  checking, where the compiler injects a runtime check to each
 	  indirect function call to ensure the target is a valid function with
 	  the correct static type. This restricts possible call targets and
 	  makes it more difficult for an attacker to exploit bugs that allow
@@ -891,10 +933,16 @@ config CFI_CLANG
 
 	    https://clang.llvm.org/docs/ControlFlowIntegrity.html
 
+config CFI_CLANG
+	bool
+	transitional
+	help
+	  Transitional config for CFI_CLANG to CFI migration.
+
 config CFI_ICALL_NORMALIZE_INTEGERS
 	bool "Normalize CFI tags for integers"
-	depends on CFI_CLANG
-	depends on HAVE_CFI_ICALL_NORMALIZE_INTEGERS_CLANG
+	depends on CFI
+	depends on HAVE_CFI_ICALL_NORMALIZE_INTEGERS
 	help
 	  This option normalizes the CFI tags for integer types so that all
 	  integer types of the same size and signedness receive the same CFI
@@ -907,7 +955,7 @@ config CFI_ICALL_NORMALIZE_INTEGERS
 
 	  This option is necessary for using CFI with Rust. If unsure, say N.
 
-config HAVE_CFI_ICALL_NORMALIZE_INTEGERS_CLANG
+config HAVE_CFI_ICALL_NORMALIZE_INTEGERS
 	def_bool y
 	depends on $(cc-option,-fsanitize=kcfi -fsanitize-cfi-icall-experimental-normalize-integers)
 	# With GCOV/KASAN we need this fix: https://github.com/llvm/llvm-project/pull/104826
@@ -915,7 +963,7 @@ config HAVE_CFI_ICALL_NORMALIZE_INTEGERS_CLANG
 
 config HAVE_CFI_ICALL_NORMALIZE_INTEGERS_RUSTC
 	def_bool y
-	depends on HAVE_CFI_ICALL_NORMALIZE_INTEGERS_CLANG
+	depends on HAVE_CFI_ICALL_NORMALIZE_INTEGERS
 	depends on RUSTC_VERSION >= 107900
 	# With GCOV/KASAN we need this fix: https://github.com/rust-lang/rust/pull/129373
 	depends on (RUSTC_LLVM_VERSION >= 190103 && RUSTC_VERSION >= 108200) || \
@@ -923,7 +971,7 @@ config HAVE_CFI_ICALL_NORMALIZE_INTEGERS_RUSTC
 
 config CFI_PERMISSIVE
 	bool "Use CFI in permissive mode"
-	depends on CFI_CLANG
+	depends on CFI
 	help
 	  When selected, Control Flow Integrity (CFI) violations result in a
 	  warning instead of a kernel panic. This option should only be used
@@ -1475,7 +1523,6 @@ config RANDOMIZE_KSTACK_OFFSET
 	bool "Support for randomizing kernel stack offset on syscall entry" if EXPERT
 	default y
 	depends on HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET
-	depends on INIT_STACK_NONE || !CC_IS_CLANG || CLANG_VERSION >= 140000
 	help
 	  The kernel stack offset can be randomized (after pt_regs) by
 	  roughly 5 bits of entropy, frustrating memory corruption
@@ -1609,7 +1656,7 @@ config HAVE_SPARSE_SYSCALL_NR
 	  related optimizations for a given architecture.
 
 config ARCH_HAS_VDSO_ARCH_DATA
-	depends on GENERIC_VDSO_DATA_STORE
+	depends on HAVE_GENERIC_VDSO
 	bool
 
 config ARCH_HAS_VDSO_TIME_DATA
@@ -1730,6 +1777,10 @@ config ARCH_VMLINUX_NEEDS_RELOCS
 	  relocations preserved. This is used by some architectures to
 	  construct bespoke relocation tables for KASLR.
 
+# Select if architecture uses the common generic TIF bits
+config HAVE_GENERIC_TIF_BITS
+       bool
+
 source "kernel/gcov/Kconfig"
 
 source "scripts/gcc-plugins/Kconfig"
diff --git a/arch/alpha/include/asm/bitops.h b/arch/alpha/include/asm/bitops.h
index 3e33621922c3..76e4343c090f 100644
--- a/arch/alpha/include/asm/bitops.h
+++ b/arch/alpha/include/asm/bitops.h
@@ -328,7 +328,7 @@ static inline unsigned long ffz_b(unsigned long x)
 	return sum;
 }
 
-static inline unsigned long ffz(unsigned long word)
+static inline unsigned long __attribute_const__ ffz(unsigned long word)
 {
 #if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67)
 	/* Whee.  EV67 can calculate it directly.  */
@@ -348,7 +348,7 @@ static inline unsigned long ffz(unsigned long word)
 /*
  * __ffs = Find First set bit in word.  Undefined if no set bit exists.
  */
-static inline unsigned long __ffs(unsigned long word)
+static inline __attribute_const__ unsigned long __ffs(unsigned long word)
 {
 #if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67)
 	/* Whee.  EV67 can calculate it directly.  */
@@ -373,7 +373,7 @@ static inline unsigned long __ffs(unsigned long word)
  * differs in spirit from the above __ffs.
  */
 
-static inline int ffs(int word)
+static inline __attribute_const__ int ffs(int word)
 {
 	int result = __ffs(word) + 1;
 	return word ? result : 0;
@@ -383,14 +383,14 @@ static inline int ffs(int word)
  * fls: find last bit set.
  */
 #if defined(CONFIG_ALPHA_EV6) && defined(CONFIG_ALPHA_EV67)
-static inline int fls64(unsigned long word)
+static inline __attribute_const__ int fls64(unsigned long word)
 {
 	return 64 - __kernel_ctlz(word);
 }
 #else
 extern const unsigned char __flsm1_tab[256];
 
-static inline int fls64(unsigned long x)
+static inline __attribute_const__ int fls64(unsigned long x)
 {
 	unsigned long t, a, r;
 
@@ -403,12 +403,12 @@ static inline int fls64(unsigned long x)
 }
 #endif
 
-static inline unsigned long __fls(unsigned long x)
+static inline __attribute_const__ unsigned long __fls(unsigned long x)
 {
 	return fls64(x) - 1;
 }
 
-static inline int fls(unsigned int x)
+static inline __attribute_const__ int fls(unsigned int x)
 {
 	return fls64(x);
 }
diff --git a/arch/alpha/include/asm/floppy.h b/arch/alpha/include/asm/floppy.h
index 64b42d9591fc..5a6239e65097 100644
--- a/arch/alpha/include/asm/floppy.h
+++ b/arch/alpha/include/asm/floppy.h
@@ -90,25 +90,6 @@ static int FDC2 = -1;
 #define N_FDC 2
 #define N_DRIVE 8
 
-/*
- * Most Alphas have no problems with floppy DMA crossing 64k borders,
- * except for certain ones, like XL and RUFFIAN.
- *
- * However, the test is simple and fast, and this *is* floppy, after all,
- * so we do it for all platforms, just to make sure.
- *
- * This is advantageous in other circumstances as well, as in moving
- * about the PCI DMA windows and forcing the floppy to start doing
- * scatter-gather when it never had before, and there *is* a problem
- * on that platform... ;-}
- */
-
-static inline unsigned long CROSS_64KB(void *a, unsigned long s)
-{
-	unsigned long p = (unsigned long)a;
-	return ((p + s - 1) ^ p) & ~0xffffUL;
-}
-
 #define EXTRA_FLOPPY_PARAMS
 
 #endif /* __ASM_ALPHA_FLOPPY_H */
diff --git a/arch/alpha/kernel/asm-offsets.c b/arch/alpha/kernel/asm-offsets.c
index e9dad60b147f..1ebb05890499 100644
--- a/arch/alpha/kernel/asm-offsets.c
+++ b/arch/alpha/kernel/asm-offsets.c
@@ -4,6 +4,7 @@
  * This code generates raw asm output which is post-processed to extract
  * and format the required data.
  */
+#define COMPILE_OFFSETS
 
 #include <linux/types.h>
 #include <linux/stddef.h>
diff --git a/arch/alpha/kernel/process.c b/arch/alpha/kernel/process.c
index 582d96548385..06522451f018 100644
--- a/arch/alpha/kernel/process.c
+++ b/arch/alpha/kernel/process.c
@@ -231,7 +231,7 @@ flush_thread(void)
  */
 int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
-	unsigned long clone_flags = args->flags;
+	u64 clone_flags = args->flags;
 	unsigned long usp = args->stack;
 	unsigned long tls = args->tls;
 	extern void ret_from_fork(void);
diff --git a/arch/arc/include/asm/bitops.h b/arch/arc/include/asm/bitops.h
index 5340c2871392..df894235fdbc 100644
--- a/arch/arc/include/asm/bitops.h
+++ b/arch/arc/include/asm/bitops.h
@@ -133,6 +133,8 @@ static inline __attribute__ ((const)) int fls(unsigned int x)
  */
 static inline __attribute__ ((const)) unsigned long __fls(unsigned long x)
 {
+	if (__builtin_constant_p(x))
+		return x ? BITS_PER_LONG - 1 - __builtin_clzl(x) : 0;
 	/* FLS insn has exactly same semantics as the API */
 	return	__builtin_arc_fls(x);
 }
diff --git a/arch/arc/kernel/asm-offsets.c b/arch/arc/kernel/asm-offsets.c
index f77deb799175..2978da85fcb6 100644
--- a/arch/arc/kernel/asm-offsets.c
+++ b/arch/arc/kernel/asm-offsets.c
@@ -2,6 +2,7 @@
 /*
  * Copyright (C) 2004, 2007-2010, 2011-2012 Synopsys, Inc. (www.synopsys.com)
  */
+#define COMPILE_OFFSETS
 
 #include <linux/sched.h>
 #include <linux/mm.h>
diff --git a/arch/arc/kernel/process.c b/arch/arc/kernel/process.c
index 186ceab661eb..8166d0908713 100644
--- a/arch/arc/kernel/process.c
+++ b/arch/arc/kernel/process.c
@@ -166,7 +166,7 @@ asmlinkage void ret_from_fork(void);
  */
 int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
-	unsigned long clone_flags = args->flags;
+	u64 clone_flags = args->flags;
 	unsigned long usp = args->stack;
 	unsigned long tls = args->tls;
 	struct pt_regs *c_regs;        /* child's pt_regs */
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index b1f3df39ed40..2a124c92e4f6 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -38,7 +38,7 @@ config ARM
 	select ARCH_OPTIONAL_KERNEL_RWX_DEFAULT if CPU_V7
 	select ARCH_NEED_CMPXCHG_1_EMU if CPU_V6
 	select ARCH_SUPPORTS_ATOMIC_RMW
-	select ARCH_SUPPORTS_CFI_CLANG
+	select ARCH_SUPPORTS_CFI
 	select ARCH_SUPPORTS_HUGETLBFS if ARM_LPAE
 	select ARCH_SUPPORTS_PER_VMA_LOCK
 	select ARCH_USE_BUILTIN_BSWAP
@@ -166,15 +166,12 @@ config ARM
 	  <http://www.arm.linux.org.uk/>.
 
 config ARM_HAS_GROUP_RELOCS
-	def_bool y
-	depends on !LD_IS_LLD || LLD_VERSION >= 140000
-	depends on !COMPILE_TEST
+	def_bool !COMPILE_TEST
 	help
 	  Whether or not to use R_ARM_ALU_PC_Gn or R_ARM_LDR_PC_Gn group
-	  relocations, which have been around for a long time, but were not
-	  supported in LLD until version 14. The combined range is -/+ 256 MiB,
-	  which is usually sufficient, but not for allyesconfig, so we disable
-	  this feature when doing compile testing.
+	  relocations. The combined range is -/+ 256 MiB, which is usually
+	  sufficient, but not for allyesconfig, so we disable this feature
+	  when doing compile testing.
 
 config ARM_DMA_USE_IOMMU
 	bool
@@ -393,8 +390,6 @@ source "arch/arm/mach-highbank/Kconfig"
 
 source "arch/arm/mach-hisi/Kconfig"
 
-source "arch/arm/mach-hpe/Kconfig"
-
 source "arch/arm/mach-imx/Kconfig"
 
 source "arch/arm/mach-ixp4xx/Kconfig"
@@ -941,28 +936,14 @@ config IRQSTACKS
 config ARM_CPU_TOPOLOGY
 	bool "Support cpu topology definition"
 	depends on SMP && CPU_V7
+	select ARCH_SUPPORTS_SCHED_MC
+	select ARCH_SUPPORTS_SCHED_SMT
 	default y
 	help
 	  Support ARM cpu topology definition. The MPIDR register defines
 	  affinity between processors which is then used to describe the cpu
 	  topology of an ARM System.
 
-config SCHED_MC
-	bool "Multi-core scheduler support"
-	depends on ARM_CPU_TOPOLOGY
-	help
-	  Multi-core scheduler support improves the CPU scheduler's decision
-	  making when dealing with multi-core CPU chips at a cost of slightly
-	  increased overhead in some places. If unsure say N here.
-
-config SCHED_SMT
-	bool "SMT scheduler support"
-	depends on ARM_CPU_TOPOLOGY
-	help
-	  Improves the CPU scheduler's decision making when dealing with
-	  MultiThreading at a cost of slightly increased overhead in some
-	  places. If unsure say N here.
-
 config HAVE_ARM_SCU
 	bool
 	help
diff --git a/arch/arm/Kconfig.platforms b/arch/arm/Kconfig.platforms
index 845ab08e20a4..5c19c1f2cff6 100644
--- a/arch/arm/Kconfig.platforms
+++ b/arch/arm/Kconfig.platforms
@@ -87,6 +87,31 @@ config MACH_ASM9260
 	help
 	  Support for Alphascale ASM9260 based platform.
 
+menuconfig ARCH_HPE
+	bool "HPE SoC support"
+	depends on ARCH_MULTI_V7
+	help
+	  This enables support for HPE ARM based BMC chips.
+
+if ARCH_HPE
+
+config ARCH_HPE_GXP
+	bool "HPE GXP SoC"
+	depends on ARCH_MULTI_V7
+	select ARM_VIC
+	select GENERIC_IRQ_CHIP
+	select CLKSRC_MMIO
+	help
+	  HPE GXP is the name of the HPE Soc. This SoC is used to implement many
+	  BMC features at HPE. It supports ARMv7 architecture based on the Cortex
+	  A9 core. It is capable of using an AXI bus to which a memory controller
+	  is attached. It has multiple SPI interfaces to connect boot flash and
+	  BIOS flash. It uses a 10/100/1000 MAC for network connectivity. It
+	  has multiple i2c engines to drive connectivity with a host
+	  infrastructure.
+
+endif
+
 menuconfig ARCH_MOXART
 	bool "MOXA ART SoC"
 	depends on ARCH_MULTI_V4
diff --git a/arch/arm/Makefile b/arch/arm/Makefile
index e31e95ffd33f..b7de4b6b284c 100644
--- a/arch/arm/Makefile
+++ b/arch/arm/Makefile
@@ -189,7 +189,6 @@ machine-$(CONFIG_ARCH_FOOTBRIDGE)	+= footbridge
 machine-$(CONFIG_ARCH_GEMINI)		+= gemini
 machine-$(CONFIG_ARCH_HIGHBANK)		+= highbank
 machine-$(CONFIG_ARCH_HISI)		+= hisi
-machine-$(CONFIG_ARCH_HPE)		+= hpe
 machine-$(CONFIG_ARCH_IXP4XX)		+= ixp4xx
 machine-$(CONFIG_ARCH_KEYSTONE)		+= keystone
 machine-$(CONFIG_ARCH_LPC18XX)		+= lpc18xx
diff --git a/arch/arm/boot/dts/allwinner/Makefile b/arch/arm/boot/dts/allwinner/Makefile
index d799ad153b37..f71392a55df8 100644
--- a/arch/arm/boot/dts/allwinner/Makefile
+++ b/arch/arm/boot/dts/allwinner/Makefile
@@ -182,6 +182,7 @@ dtb-$(CONFIG_MACH_SUN7I) += \
 	sun7i-a20-wits-pro-a20-dkt.dtb
 
 # Enables support for device-tree overlays for all pis
+DTC_FLAGS_sun8i-h2-plus-orangepi-zero := -@
 DTC_FLAGS_sun8i-h3-orangepi-lite := -@
 DTC_FLAGS_sun8i-h3-bananapi-m2-plus := -@
 DTC_FLAGS_sun8i-h3-nanopi-m1-plus := -@
@@ -199,6 +200,7 @@ DTC_FLAGS_sun8i-h3-nanopi-r1 := -@
 DTC_FLAGS_sun8i-h3-orangepi-pc := -@
 DTC_FLAGS_sun8i-h3-bananapi-m2-plus-v1.2 := -@
 DTC_FLAGS_sun8i-h3-orangepi-pc-plus := -@
+DTC_FLAGS_sun8i-t113s-netcube-nagami-basic-carrier := -@
 DTC_FLAGS_sun8i-v3s-netcube-kumquat := -@
 dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-a23-evb.dtb \
@@ -225,6 +227,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-h2-plus-libretech-all-h3-cc.dtb \
 	sun8i-h2-plus-orangepi-r1.dtb \
 	sun8i-h2-plus-orangepi-zero.dtb \
+	sun8i-h2-plus-orangepi-zero-interface-board.dtb \
 	sun8i-h3-bananapi-m2-plus.dtb \
 	sun8i-h3-bananapi-m2-plus-v1.2.dtb \
 	sun8i-h3-beelink-x2.dtb \
@@ -244,6 +247,7 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-h3-orangepi-plus.dtb \
 	sun8i-h3-orangepi-plus2e.dtb \
 	sun8i-h3-orangepi-zero-plus2.dtb \
+	sun8i-h3-orangepi-zero-plus2-interface-board.dtb \
 	sun8i-h3-rervision-dvk.dtb \
 	sun8i-h3-zeropi.dtb \
 	sun8i-h3-emlid-neutis-n5h3-devboard.dtb \
@@ -257,6 +261,8 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-s3-lichee-zero-plus.dtb \
 	sun8i-s3-pinecube.dtb \
 	sun8i-t113s-mangopi-mq-r-t113.dtb \
+	sun8i-t113s-netcube-nagami-basic-carrier.dtb \
+	sun8i-t113s-netcube-nagami-keypad-carrier.dtb \
 	sun8i-t3-cqa3t-bv3.dtb \
 	sun8i-v3-sl631-imx179.dtb \
 	sun8i-v3s-anbernic-rg-nano.dtb \
@@ -264,6 +270,10 @@ dtb-$(CONFIG_MACH_SUN8I) += \
 	sun8i-v3s-licheepi-zero-dock.dtb \
 	sun8i-v3s-netcube-kumquat.dtb \
 	sun8i-v40-bananapi-m2-berry.dtb
+sun8i-h2-plus-orangepi-zero-interface-board-dtbs += \
+	sun8i-h2-plus-orangepi-zero.dtb sun8i-orangepi-zero-interface-board.dtbo
+sun8i-h3-orangepi-zero-plus2-interface-board-dtbs += \
+	sun8i-h3-orangepi-zero-plus2.dtb sun8i-orangepi-zero-interface-board.dtbo
 dtb-$(CONFIG_MACH_SUN9I) += \
 	sun9i-a80-optimus.dtb \
 	sun9i-a80-cubieboard4.dtb
diff --git a/arch/arm/boot/dts/allwinner/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/allwinner/sun4i-a10-olinuxino-lime.dts
index 83d283cf6633..d425d9ee83db 100644
--- a/arch/arm/boot/dts/allwinner/sun4i-a10-olinuxino-lime.dts
+++ b/arch/arm/boot/dts/allwinner/sun4i-a10-olinuxino-lime.dts
@@ -218,7 +218,7 @@
 &usbphy {
 	usb0_id_det-gpios = <&pio 7 4 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH4 */
 	usb0_vbus_det-gpios = <&pio 7 5 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PH5 */
-	usb0_vbus-supply   = <&reg_usb0_vbus>;
+	usb0_vbus-supply = <&reg_usb0_vbus>;
 	usb1_vbus-supply = <&reg_usb1_vbus>;
 	usb2_vbus-supply = <&reg_usb2_vbus>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts
index 1b001f2ad0ef..b23cec5b89eb 100644
--- a/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts
@@ -112,6 +112,20 @@
 	};
 };
 
+/*
+ * Audio input/output is exposed on the 13-pin header and can't be used for
+ * anything else. However, adapter boards may use different audio routing.
+ * - https://linux-sunxi.org/Xunlong_Orange_Pi_Zero#Expansion_Port
+ * - Allwinner H3 Datasheet, section 3.1. Pin Characteristics
+ */
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+	status = "disabled";
+};
+
 &cpu0 {
 	cpu-supply = <&reg_vdd_cpux>;
 };
diff --git a/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts
index 7a6444a10e25..97a3565ac7a8 100644
--- a/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts
@@ -99,6 +99,20 @@
 	};
 };
 
+/*
+ * Audio input/output is exposed on the 13-pin header and can't be used for
+ * anything else. However, adapter boards may use different audio routing.
+ * - http://www.orangepi.org/html/hardWare/computerAndMicrocontrollers/details/Orange-Pi-Zero-Plus-2.html
+ * - Allwinner H3 Datasheet, section 3.1. Pin Characteristics
+ */
+&codec {
+	allwinner,audio-routing =
+		"Line Out", "LINEOUT",
+		"MIC1", "Mic",
+		"Mic",  "MBIAS";
+	status = "disabled";
+};
+
 &de {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/allwinner/sun8i-orangepi-zero-interface-board.dtso b/arch/arm/boot/dts/allwinner/sun8i-orangepi-zero-interface-board.dtso
new file mode 100644
index 000000000000..e137eefee341
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-orangepi-zero-interface-board.dtso
@@ -0,0 +1,46 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR X11)
+/*
+ * Copyright (C) 2025 J. Neuschäfer <j.ne@posteo.net>
+ *
+ * Devicetree overlay for the Orange Pi Zero Interface board (OP0014).
+ *
+ *   https://orangepi.com/index.php?route=product/product&product_id=871
+ *
+ * This overlay applies to the following base files:
+ *
+ * - arch/arm/boot/dts/allwinner/sun8i-h2-plus-orangepi-zero.dts
+ * - arch/arm/boot/dts/allwinner/sun8i-h3-orangepi-zero-plus2.dts
+ */
+
+/dts-v1/;
+/plugin/;
+
+&codec {
+	status = "okay";
+};
+
+&de {
+	status = "okay";
+};
+
+&ehci2 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+&ir {
+	pinctrl-names = "default";
+	pinctrl-0 = <&r_ir_rx_pin>;
+	status = "okay";
+};
+
+&ohci2 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-q8-common.dtsi b/arch/arm/boot/dts/allwinner/sun8i-q8-common.dtsi
index 272584881bb2..a0f787581dd9 100644
--- a/arch/arm/boot/dts/allwinner/sun8i-q8-common.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-q8-common.dtsi
@@ -82,7 +82,7 @@
 };
 
 &ehci0 {
-	status  = "okay";
+	status = "okay";
 };
 
 &mmc1 {
diff --git a/arch/arm/boot/dts/allwinner/sun8i-r40.dtsi b/arch/arm/boot/dts/allwinner/sun8i-r40.dtsi
index fa162f7fa9f0..f0ed802a9d08 100644
--- a/arch/arm/boot/dts/allwinner/sun8i-r40.dtsi
+++ b/arch/arm/boot/dts/allwinner/sun8i-r40.dtsi
@@ -705,7 +705,7 @@
 			};
 
 			/omit-if-no-ref/
-			uart2_rts_cts_pi_pins: uart2-rts-cts-pi-pins{
+			uart2_rts_cts_pi_pins: uart2-rts-cts-pi-pins {
 				pins = "PI16", "PI17";
 				function = "uart2";
 			};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-basic-carrier.dts b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-basic-carrier.dts
new file mode 100644
index 000000000000..5262102a85f6
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-basic-carrier.dts
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 Lukas Schmid <lukas.schmid@netcube.li>
+ */
+
+/dts-v1/;
+#include "sun8i-t113s-netcube-nagami.dtsi"
+
+/ {
+	model = "NetCube Systems Nagami Basic Carrier Board";
+	compatible = "netcube,nagami-basic-carrier", "netcube,nagami",
+		     "allwinner,sun8i-t113s";
+};
+
+&can0 {
+	status = "okay";
+};
+
+&can1 {
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&i2s1 {
+	status = "okay";
+};
+
+&mmc0 {
+	vmmc-supply = <&reg_vcc3v3>;
+	broken-cd;
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&usb_otg {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&usbphy {
+	usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-keypad-carrier.dts b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-keypad-carrier.dts
new file mode 100644
index 000000000000..4ffa6a0216d8
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami-keypad-carrier.dts
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 Lukas Schmid <lukas.schmid@netcube.li>
+ */
+
+/dts-v1/;
+#include "sun8i-t113s-netcube-nagami.dtsi"
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "NetCube Systems Nagami Keypad Carrier Board";
+	compatible = "netcube,nagami-keypad-carrier", "netcube,nagami",
+		     "allwinner,sun8i-t113s";
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_status_red: led-status-red {
+			gpios = <&pio 3 16 GPIO_ACTIVE_HIGH>;  /* PD16 */
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_STATUS;
+		};
+
+		led_status_green: led-status-green {
+			gpios = <&pio 3 22 GPIO_ACTIVE_HIGH>;  /* PD22 */
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+
+	tca8418: keypad@34 {
+		compatible = "ti,tca8418";
+		reg = <0x34>;
+		interrupts-extended = <&pio 5 6 IRQ_TYPE_EDGE_FALLING>;  /* PF6 */
+		linux,keymap = <MATRIX_KEY(0x03, 0x00, KEY_NUMERIC_A)
+				MATRIX_KEY(0x03, 0x01, KEY_NUMERIC_1)
+				MATRIX_KEY(0x03, 0x02, KEY_NUMERIC_2)
+				MATRIX_KEY(0x03, 0x03, KEY_NUMERIC_3)
+				MATRIX_KEY(0x02, 0x00, KEY_NUMERIC_B)
+				MATRIX_KEY(0x02, 0x01, KEY_NUMERIC_4)
+				MATRIX_KEY(0x02, 0x02, KEY_NUMERIC_5)
+				MATRIX_KEY(0x02, 0x03, KEY_NUMERIC_6)
+				MATRIX_KEY(0x01, 0x00, KEY_NUMERIC_C)
+				MATRIX_KEY(0x01, 0x01, KEY_NUMERIC_7)
+				MATRIX_KEY(0x01, 0x02, KEY_NUMERIC_8)
+				MATRIX_KEY(0x01, 0x03, KEY_NUMERIC_9)
+				MATRIX_KEY(0x00, 0x00, KEY_NUMERIC_D)
+				MATRIX_KEY(0x00, 0x01, KEY_CLEAR)
+				MATRIX_KEY(0x00, 0x02, KEY_NUMERIC_0)
+				MATRIX_KEY(0x00, 0x03, KEY_OK)
+		>;
+		keypad,num-rows = <4>;
+		keypad,num-columns = <4>;
+	};
+};
+
+&pio {
+	gpio-line-names = "", "", "", "", // PA
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "", // PB
+			  "", "", "UART3_TX", "UART3_RX",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "eMMC_CLK", "eMMC_CMD", // PC
+			  "eMMC_D2", "eMMC_D1", "eMMC_D0", "eMMC_D3",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "", // PD
+			  "", "", "", "",
+			  "", "USB_SEC_EN", "", "",
+			  "", "", "", "",
+			  "LED_STATUS_RED", "", "", "",
+			  "I2C2_SCL", "I2C2_SDA", "LED_STATUS_GREEN", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "ETH_CRSDV", "ETH_RXD0", "ETH_RXD1", "ETH_TXCK", // PE
+			  "ETH_TXD0", "ETH_TXD1", "ETH_TXEN", "",
+			  "ETH_MDC", "ETH_MDIO", "QWIIC_nINT", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "", // PF
+			  "", "", "KEY_nINT", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "ESP_CLK", "ESP_CMD", "ESP_D0", "ESP_D1", // PG
+			  "ESP_D2", "ESP_D3", "UART1_TXD", "UART1_RXD",
+			  "ESP_nBOOT", "ESP_nRST", "I2C3_SCL", "I2C3_SDA",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+&usb_otg {
+	dr_mode = "peripheral";
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami.dtsi b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami.dtsi
new file mode 100644
index 000000000000..544d60cfc32e
--- /dev/null
+++ b/arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-nagami.dtsi
@@ -0,0 +1,250 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 Lukas Schmid <lukas.schmid@netcube.li>
+ */
+
+/dts-v1/;
+#include "sun8i-t113s.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+
+/ {
+	model = "NetCube Systems Nagami SoM";
+	compatible = "netcube,nagami", "allwinner,sun8i-t113s";
+
+	aliases {
+		serial1 = &uart1; // ESP32 Bootloader UART
+		serial3 = &uart3; // Console UART on Card Edge
+		ethernet0 = &emac;
+	};
+
+	chosen {
+		stdout-path = "serial3:115200n8";
+	};
+
+	/* module wide 3.3V supply directly from the card edge */
+	reg_vcc3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	/* SY8008 DC/DC regulator on the board, also supplying VDD-SYS */
+	reg_vcc_core: regulator-core {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-core";
+		regulator-min-microvolt = <880000>;
+		regulator-max-microvolt = <880000>;
+		vin-supply = <&reg_vcc3v3>;
+	};
+
+	/* USB0 MUX to switch connect to Card-Edge only after BootROM */
+	usb0_sec_mux: mux-controller{
+		compatible = "gpio-mux";
+		#mux-control-cells = <0>;
+		mux-gpios = <&pio 3 9 GPIO_ACTIVE_HIGH>; /* PD9 */
+		idle-state = <1>; /* USB connected to Card-Edge by default */
+	};
+
+	/* Reset of ESP32 */
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&pio 6 9 GPIO_ACTIVE_LOW>; /* PG9 */
+		post-power-on-delay-ms = <1500>;
+		power-off-delay-us = <200>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&reg_vcc_core>;
+};
+
+&cpu1 {
+	cpu-supply = <&reg_vcc_core>;
+};
+
+&dcxo {
+	clock-frequency = <24000000>;
+};
+
+&emac {
+	nvmem-cells = <&eth0_macaddress>;
+	nvmem-cell-names = "mac-address";
+	phy-handle = <&lan8720a>;
+	phy-mode = "rmii";
+	pinctrl-0 = <&rmii_pe_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* Default I2C Interface on Card-Edge */
+&i2c2 {
+	pinctrl-0 = <&i2c2_pd_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+/* Exposed as the QWIIC connector and used by the internal EEPROM */
+&i2c3 {
+	pinctrl-0 = <&i2c3_pg_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	eeprom0: eeprom@50 {
+		compatible = "atmel,24c02";		/* actually it's a 24AA02E48 */
+		reg = <0x50>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&reg_vcc3v3>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		eth0_macaddress: macaddress@fa {
+			reg = <0xfa 0x06>;
+		};
+	};
+};
+
+/* Default I2S Interface on Card-Edge */
+&i2s1 {
+	pinctrl-0 = <&i2s1_pins>, <&i2s1_din0_pin>, <&i2s1_dout0_pin>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+/* Phy is on SoM. MDI signals pre-magnetics are on the card edge */
+&mdio {
+	lan8720a: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+/* Default SD Interface on Card-Edge */
+&mmc0 {
+	pinctrl-0 = <&mmc0_pins>;
+	pinctrl-names = "default";
+	status = "disabled";
+};
+
+/* Connected to the on-board ESP32 */
+&mmc1 {
+	pinctrl-0 = <&mmc1_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	status = "okay";
+};
+
+/* Connected to the on-board eMMC */
+&mmc2 {
+	pinctrl-0 = <&mmc2_pins>;
+	pinctrl-names = "default";
+	vmmc-supply = <&reg_vcc3v3>;
+	vqmmc-supply = <&reg_vcc3v3>;
+	bus-width = <4>;
+	non-removable;
+	status = "okay";
+};
+
+&pio {
+	vcc-pb-supply = <&reg_vcc3v3>;
+	vcc-pc-supply = <&reg_vcc3v3>;
+	vcc-pd-supply = <&reg_vcc3v3>;
+	vcc-pe-supply = <&reg_vcc3v3>;
+	vcc-pf-supply = <&reg_vcc3v3>;
+	vcc-pg-supply = <&reg_vcc3v3>;
+
+	gpio-line-names = "", "", "", "", // PA
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "CAN0_TX", "CAN0_RX", // PB
+			  "CAN1_TX", "CAN1_RX", "UART3_TX", "UART3_RX",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "eMMC_CLK", "eMMC_CMD", // PC
+			  "eMMC_D2", "eMMC_D1", "eMMC_D0", "eMMC_D3",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "", // PD
+			  "", "", "", "",
+			  "", "USB_SEC_EN", "SPI1_CS", "SPI1_CLK",
+			  "SPI1_MOSI", "SPI1_MISO", "SPI1_HOLD", "SPI1_WP",
+			  "PD16", "", "", "",
+			  "I2C2_SCL", "I2C2_SDA", "PD22", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "ETH_CRSDV", "ETH_RXD0", "ETH_RXD1", "ETH_TXCK", // PE
+			  "ETH_TXD0", "ETH_TXD1", "ETH_TXEN", "",
+			  "ETH_MDC", "ETH_MDIO", "QWIIC_nINT", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "SD_D1", "SD_D0", "SD_CLK", "SD_CLK", // PF
+			  "SD_D3", "SD_D2", "PF6", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "ESP_CLK", "ESP_CMD", "ESP_D0", "ESP_D1", // PG
+			  "ESP_D2", "ESP_D3", "UART1_TXD", "UART1_RXD",
+			  "ESP_nBOOT", "ESP_nRST", "I2C3_SCL", "I2C3_SDA",
+			  "I2S1_WS", "I2S1_CLK", "I2S1_DIN0", "I2S1_DOUT0",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "";
+};
+
+/* Remove the unused CK pin from the pinctl as it is unconnected */
+&rmii_pe_pins {
+	pins = "PE0", "PE1", "PE2", "PE3", "PE4",
+	       "PE5", "PE6", "PE8", "PE9";
+};
+
+/* Default SPI Interface on Card-Edge */
+&spi1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-0 = <&spi1_pins>, <&spi1_hold_pin>, <&spi1_wp_pin>;
+	pinctrl-names = "default";
+	cs-gpios = <0>;
+	status = "disabled";
+};
+
+/* Connected to the Bootloader/Console of the ESP32 */
+&uart1 {
+	pinctrl-0 = <&uart1_pg6_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+/* Console/Debug UART on Card-Edge */
+&uart3 {
+	pinctrl-0 = <&uart3_pb_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/allwinner/sun8i-v3s-netcube-kumquat.dts b/arch/arm/boot/dts/allwinner/sun8i-v3s-netcube-kumquat.dts
index 5143cb4e7b78..cb6292319f39 100644
--- a/arch/arm/boot/dts/allwinner/sun8i-v3s-netcube-kumquat.dts
+++ b/arch/arm/boot/dts/allwinner/sun8i-v3s-netcube-kumquat.dts
@@ -29,7 +29,7 @@
 	clk_can0: clock-can0 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency  = <40000000>;
+		clock-frequency = <40000000>;
 	};
 
 	gpio-keys {
diff --git a/arch/arm/boot/dts/aspeed/Makefile b/arch/arm/boot/dts/aspeed/Makefile
index aba7451ab749..0f0b5b707654 100644
--- a/arch/arm/boot/dts/aspeed/Makefile
+++ b/arch/arm/boot/dts/aspeed/Makefile
@@ -19,8 +19,11 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-delta-ahe50dc.dtb \
 	aspeed-bmc-facebook-bletchley.dtb \
 	aspeed-bmc-facebook-catalina.dtb \
+	aspeed-bmc-facebook-clemente.dtb \
 	aspeed-bmc-facebook-cmm.dtb \
+	aspeed-bmc-facebook-darwin.dtb \
 	aspeed-bmc-facebook-elbert.dtb \
+	aspeed-bmc-facebook-fuji-data64.dtb \
 	aspeed-bmc-facebook-fuji.dtb \
 	aspeed-bmc-facebook-galaxy100.dtb \
 	aspeed-bmc-facebook-greatlakes.dtb \
@@ -31,6 +34,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \
 	aspeed-bmc-facebook-tiogapass.dtb \
 	aspeed-bmc-facebook-wedge40.dtb \
 	aspeed-bmc-facebook-wedge100.dtb \
+	aspeed-bmc-facebook-wedge400-data64.dtb \
 	aspeed-bmc-facebook-wedge400.dtb \
 	aspeed-bmc-facebook-yamp.dtb \
 	aspeed-bmc-facebook-yosemitev2.dtb \
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts
index c435359a4bd9..53b4372f1a08 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ampere-mtjefferson.dts
@@ -243,7 +243,7 @@
 				compatible = "ti,tmp75";
 				reg = <0x49>;
 			};
-			temperature-sensor@4a{
+			temperature-sensor@4a {
 				compatible = "ti,tmp75";
 				reg = <0x4a>;
 			};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts
index 9605ccade155..b550a48f48f0 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-arm-stardragon4800-rep2.dts
@@ -171,7 +171,7 @@
 				reg = <0x50>;
 			};
 			dps650ab@58 {
-				compatible = "dps650ab";
+				compatible = "delta,dps650ab";
 				reg = <0x58>;
 			};
 		};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts
index 93190f4e696c..3ebd80db06f9 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c246d4i.dts
@@ -106,11 +106,15 @@
 		compatible = "st,24c128", "atmel,24c128";
 		reg = <0x57>;
 		pagesize = <16>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 
-		eth0_macaddress: macaddress@3f80 {
-			reg = <0x3f80 6>;
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth0_macaddress: macaddress@3f80 {
+				reg = <0x3f80 6>;
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts
index 9d00ce9475f2..8c57a071f488 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-e3c256d4i.dts
@@ -191,11 +191,15 @@
 		compatible = "st,24c128", "atmel,24c128";
 		reg = <0x57>;
 		pagesize = <16>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 
-		eth0_macaddress: macaddress@3f80 {
-			reg = <0x3f80 6>;
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth0_macaddress: macaddress@3f80 {
+				reg = <0x3f80 6>;
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts
index 6dd221644dc6..e306655ce4a3 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-romed8hm3.dts
@@ -134,11 +134,15 @@
 		compatible = "st,24c128", "atmel,24c128";
 		reg = <0x50>;
 		pagesize = <16>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 
-		eth0_macaddress: macaddress@3f80 {
-			reg = <0x3f80 6>;
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth0_macaddress: macaddress@3f80 {
+				reg = <0x3f80 6>;
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
index 0943e0bf1305..e61a6cb43438 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-asrock-x570d4u.dts
@@ -232,15 +232,19 @@
 		compatible = "st,24c128", "atmel,24c128";
 		reg = <0x57>;
 		pagesize = <16>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 
-		eth0_macaddress: macaddress@3f80 {
-			reg = <0x3f80 6>;
-		};
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth0_macaddress: macaddress@3f80 {
+				reg = <0x3f80 6>;
+			};
 
-		eth1_macaddress: macaddress@3f88 {
-			reg = <0x3f88 6>;
+			eth1_macaddress: macaddress@3f88 {
+				reg = <0x3f88 6>;
+			};
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
index 8d786510167f..14dd0ab64130 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-catalina.dts
@@ -526,11 +526,11 @@
 					tach-ch = /bits/ 8 <0x03>;
 				};
 			};
-			fanctl0: fan-controller@21{
+			fanctl0: fan-controller@21 {
 				compatible = "maxim,max31790";
 				reg = <0x21>;
 			};
-			fanctl1: fan-controller@27{
+			fanctl1: fan-controller@27 {
 				compatible = "maxim,max31790";
 				reg = <0x27>;
 			};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts
new file mode 100644
index 000000000000..ecef44d89977
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-clemente.dts
@@ -0,0 +1,1283 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2021 Facebook Inc.
+/dts-v1/;
+
+#include "aspeed-g6.dtsi"
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/usb/pd.h>
+#include <dt-bindings/leds/leds-pca955x.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/i2c/i2c.h>
+
+/ {
+	model = "Facebook Clemente BMC";
+	compatible = "facebook,clemente-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart1;
+		serial2 = &uart3;
+		serial3 = &uart4;
+		serial4 = &uart5;
+		i2c16 = &i2c1mux0ch0;
+		i2c17 = &i2c1mux0ch1;
+		i2c18 = &i2c1mux0ch2;
+		i2c19 = &i2c1mux0ch3;
+		i2c20 = &i2c1mux0ch4;
+		i2c21 = &i2c1mux0ch5;
+		i2c22 = &i2c1mux0ch6;
+		i2c23 = &i2c1mux0ch7;
+		i2c24 = &i2c0mux0ch0;
+		i2c25 = &i2c0mux0ch1;
+		i2c26 = &i2c0mux0ch2;
+		i2c27 = &i2c0mux0ch3;
+		i2c28 = &i2c0mux1ch0;
+		i2c29 = &i2c0mux1ch1;
+		i2c30 = &i2c0mux1ch2;
+		i2c31 = &i2c0mux1ch3;
+		i2c32 = &i2c0mux2ch0;
+		i2c33 = &i2c0mux2ch1;
+		i2c34 = &i2c0mux2ch2;
+		i2c35 = &i2c0mux2ch3;
+		i2c36 = &i2c0mux3ch0;
+		i2c37 = &i2c0mux3ch1;
+		i2c38 = &i2c0mux3ch2;
+		i2c39 = &i2c0mux3ch3;
+		i2c40 = &i2c0mux4ch0;
+		i2c41 = &i2c0mux4ch1;
+		i2c42 = &i2c0mux4ch2;
+		i2c43 = &i2c0mux4ch3;
+		i2c44 = &i2c0mux5ch0;
+		i2c45 = &i2c0mux5ch1;
+		i2c46 = &i2c0mux5ch2;
+		i2c47 = &i2c0mux5ch3;
+		i2c48 = &i2c0mux0ch1mux0ch0;
+		i2c49 = &i2c0mux0ch1mux0ch1;
+		i2c50 = &i2c0mux0ch1mux0ch2;
+		i2c51 = &i2c0mux0ch1mux0ch3;
+		i2c52 = &i2c0mux3ch1mux0ch0;
+		i2c53 = &i2c0mux3ch1mux0ch1;
+		i2c54 = &i2c0mux3ch1mux0ch2;
+		i2c55 = &i2c0mux3ch1mux0ch3;
+	};
+
+	chosen {
+		stdout-path = "serial4:57600n8";
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 2>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "bmc_heartbeat_amber";
+			gpios = <&gpio0 ASPEED_GPIO(P, 7) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			label = "fp_id_amber";
+			default-state = "off";
+			gpios = <&gpio0 ASPEED_GPIO(B, 5) GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			label = "bmc_ready_noled";
+			gpios = <&gpio0 ASPEED_GPIO(B, 3) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+		};
+
+		led-3 {
+			label = "bmc_ready_cpld_noled";
+			gpios = <&gpio0 ASPEED_GPIO(P, 5) (GPIO_ACTIVE_HIGH|GPIO_TRANSITORY)>;
+		};
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x80000000>;
+	};
+
+	p1v8_bmc_aux: regulator-p1v8-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p1v8_bmc_aux";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	p2v5_bmc_aux: regulator-p2v5-bmc-aux {
+		compatible = "regulator-fixed";
+		regulator-name = "p2v5_bmc_aux";
+		regulator-min-microvolt = <2500000>;
+		regulator-max-microvolt = <2500000>;
+		regulator-always-on;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@b3e00000 {
+			compatible = "ramoops";
+			reg = <0xbb000000 0x200000>; /* 16 * (4 * 0x8000) */
+			record-size = <0x8000>;
+			console-size = <0x8000>;
+			ftrace-size = <0x8000>;
+			pmsg-size = <0x8000>;
+			max-reason = <3>;
+		};
+	};
+
+	spi1_gpio: spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+&adc0 {
+	vref-supply = <&p1v8_bmc_aux>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		&pinctrl_adc2_default &pinctrl_adc3_default
+		&pinctrl_adc4_default &pinctrl_adc5_default
+		&pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	vref-supply = <&p2v5_bmc_aux>;
+	status = "okay";
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_adc10_default>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&fmc {
+	status = "okay";
+	flash@0 {
+		status = "okay";
+		m25p,fast-read;
+		label = "bmc";
+		spi-max-frequency = <50000000>;
+#include "openbmc-flash-layout-128.dtsi"
+	};
+
+	flash@1 {
+		status = "okay";
+		m25p,fast-read;
+		label = "alt-bmc";
+		spi-max-frequency = <50000000>;
+	};
+};
+
+&gpio0 {
+	gpio-line-names =
+	/*A0-A7*/	"","","","","","","","",
+	/*B0-B7*/	"BATTERY_DETECT","PRSNT1_HPM_SCM_N",
+			"BMC_I2C1_FPGA_ALERT_L","BMC_READY",
+			"IOEXP_INT_L","FM_ID_LED",
+			"","",
+	/*C0-C7*/	"BMC_GPIOC0","","","",
+			"PMBUS_REQ_N","PSU_FW_UPDATE_REQ_N",
+			"","BMC_I2C_SSIF_ALERT_L",
+	/*D0-D7*/	"","","","","BMC_GPIOD4","","","",
+	/*E0-E7*/	"BMC_GPIOE0","BMC_GPIOE1","","","","","","",
+	/*F0-F7*/	"","","","","","","","",
+	/*G0-G7*/	"","","","","","",
+			"FM_DEBUG_PORT_PRSNT_N","FM_BMC_DBP_PRESENT_N",
+	/*H0-H7*/	"PWR_BRAKE_L","RUN_POWER_EN",
+			"SHDN_FORCE_L","SHDN_REQ_L",
+			"","","","",
+	/*I0-I7*/	"","","","",
+			"","FLASH_WP_STATUS",
+			"FM_PDB_HEALTH_N","RUN_POWER_PG",
+	/*J0-J7*/	"","","","","","","","",
+	/*K0-K7*/	"","","","","","","","",
+	/*L0-L7*/	"","","","","","","","",
+	/*M0-M7*/	"PCIE_EP_RST_EN","BMC_FRU_WP",
+			"SCM_HPM_STBY_RST_N","SCM_HPM_STBY_EN",
+			"STBY_POWER_PG_3V3","TH500_SHDN_OK_L","","",
+	/*N0-N7*/	"LED_POSTCODE_0","LED_POSTCODE_1",
+			"LED_POSTCODE_2","LED_POSTCODE_3",
+			"LED_POSTCODE_4","LED_POSTCODE_5",
+			"LED_POSTCODE_6","LED_POSTCODE_7",
+	/*O0-O7*/	"HMC_I2C3_FPGA_ALERT_L","FPGA_READY_HMC",
+			"CHASSIS_AC_LOSS_L","BSM_PRSNT_R_N",
+			"PSU_SMB_ALERT_L","FM_TPM_PRSNT_0_N",
+			"","USBDBG_IPMI_EN_L",
+	/*P0-P7*/	"PWR_BTN_BMC_N","IPEX_CABLE_PRSNT_L",
+			"ID_RST_BTN_BMC_N","RST_BMC_RSTBTN_OUT_N",
+			"host0-ready","BMC_READY_CPLD","BMC_GPIOP6","BMC_HEARTBEAT_N",
+	/*Q0-Q7*/	"IRQ_PCH_TPM_SPI_N","USB_OC0_REAR_R_N",
+			"UART_MUX_SEL","I2C_MUX_RESET_L",
+			"RSVD_NV_PLT_DETECT","SPI_TPM_INT_L",
+			"CPU_JTAG_MUX_SELECT","THERM_BB_OVERT_L",
+	/*R0-R7*/	"THERM_BB_WARN_L","SPI_BMC_FPGA_INT_L",
+			"CPU_BOOT_DONE","PMBUS_GNT_L",
+			"CHASSIS_PWR_BRK_L","PCIE_WAKE_L",
+			"PDB_THERM_OVERT_L","HMC_I2C2_FPGA_ALERT_L",
+	/*S0-S7*/	"","","SYS_BMC_PWRBTN_R_N","FM_TPM_PRSNT_1_N",
+			"FM_BMC_DEBUG_SW_N","UID_LED_N",
+			"SYS_FAULT_LED_N","RUN_POWER_FAULT_L",
+	/*T0-T7*/	"","","","","","","","",
+	/*U0-U7*/	"","","","","","","","",
+	/*V0-V7*/	"L2_RST_REQ_OUT_L","L0L1_RST_REQ_OUT_L",
+			"BMC_ID_BEEP_SEL","BMC_I2C0_FPGA_ALERT_L",
+			"SMB_BMC_TMP_ALERT","PWR_LED_N",
+			"SYS_RST_OUT_L","IRQ_TPM_SPI_N",
+	/*W0-W7*/	"","","","","","","","",
+	/*X0-X7*/	"","","","","","","","",
+	/*Y0-Y7*/	"","RST_BMC_SELF_HW",
+			"FM_FLASH_LATCH_N","BMC_EMMC_RST_N",
+			"BMC_GPIOY4","BMC_GPIOY5","","",
+	/*Z0-Z7*/	"","","","","","","BMC_GPIOZ6","BMC_GPIOZ7";
+};
+
+&gpio1 {
+	gpio-line-names =
+	/*18A0-18A7*/	"","","","","","","","",
+	/*18B0-18B3*/	"","","","",
+	/*18B4-18B7*/	"FM_BOARD_BMC_REV_ID0","FM_BOARD_BMC_REV_ID1","FM_BOARD_BMC_REV_ID2","",
+	/*18C0-18C7*/	"","","PI_BMC_BIOS_ROM_IRQ0_N","","","","","",
+	/*18D0-18D7*/	"","","","","","","","",
+	/*18E0-18E3*/	"","","","AC_PWR_BMC_BTN_N","","","","";
+};
+
+&i2c0 {
+	status = "okay";
+
+	i2c-mux@71 {
+		compatible = "nxp,pca9546";
+		reg = <0x71>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c0mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			// HDD FRU EEPROM
+			eeprom@56 {
+				compatible = "atmel,24c128";
+				reg = <0x56>;
+			};
+
+			// E1.S Backplane
+			i2c0mux0ch1mux0: i2c-mux@74 {
+				compatible = "nxp,pca9546";
+				reg = <0x74>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c0mux0ch1mux0ch0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c0mux0ch1mux0ch1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c0mux0ch1mux0ch2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c0mux0ch1mux0ch3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		};
+
+		i2c0mux0ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux0ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@72 {
+		compatible = "nxp,pca9546";
+		reg = <0x72>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux1ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c0mux1ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			// IO Mezz 0 IOEXP
+			io_expander7: gpio@20 {
+				compatible = "nxp,pca9535";
+				reg = <0x20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"RST_CX7_0",
+					"RST_CX7_1",
+					"CX0_SSD0_PRSNT_L",
+					"CX1_SSD1_PRSNT_L",
+					"CX_BOOT_CMPLT_CX0",
+					"CX_BOOT_CMPLT_CX1",
+					"CX_TWARN_CX0_L",
+					"CX_TWARN_CX1_L",
+					"CX_OVT_SHDN_CX0",
+					"CX_OVT_SHDN_CX1",
+					"FNP_L_CX0",
+					"FNP_L_CX1",
+					"",
+					"MCU_GPIO",
+					"MCU_RST_N",
+					"MCU_RECOVERY_N";
+			};
+
+			// IO Mezz 0 FRU EEPROM
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			// OSFP 0 FRU EEPROM
+			eeprom@52 {
+				compatible = "atmel,24c128";
+				reg = <0x52>;
+			};
+		};
+
+		i2c0mux1ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux1ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@73 {
+		compatible = "nxp,pca9546";
+		reg = <0x73>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux2ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			// IOB0 NIC0 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+
+		i2c0mux2ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c0mux2ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux2ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			// IOB0 NIC1 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+	};
+
+	i2c-mux@75 {
+		compatible = "nxp,pca9546";
+		reg = <0x75>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux3ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c0mux3ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			// E1.S Backplane HDD FRU EEPROM
+			eeprom@56 {
+				compatible = "atmel,24c128";
+				reg = <0x56>;
+			};
+
+			// E1.S Backplane MUX
+			i2c0mux3ch1mux0: i2c-mux@74 {
+				compatible = "nxp,pca9546";
+				reg = <0x74>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				i2c-mux-idle-disconnect;
+
+				i2c0mux3ch1mux0ch0: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				i2c0mux3ch1mux0ch1: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				i2c0mux3ch1mux0ch2: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				i2c0mux3ch1mux0ch3: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+			};
+		};
+
+		i2c0mux3ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux3ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@76 {
+		compatible = "nxp,pca9546";
+		reg = <0x76>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux4ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		i2c0mux4ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			// IO Mezz 1 IOEXP
+			io_expander8: gpio@21 {
+				compatible = "nxp,pca9535";
+				reg = <0x21>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"SEC_RST_CX7_0",
+					"SEC_RST_CX7_1",
+					"SEC_CX0_SSD0_PRSNT_L",
+					"SEC_CX1_SSD1_PRSNT_L",
+					"SEC_CX_BOOT_CMPLT_CX0",
+					"SEC_CX_BOOT_CMPLT_CX1",
+					"SEC_CX_TWARN_CX0_L",
+					"SEC_CX_TWARN_CX1_L",
+					"SEC_CX_OVT_SHDN_CX0",
+					"SEC_CX_OVT_SHDN_CX1",
+					"SEC_FNP_L_CX0",
+					"SEC_FNP_L_CX1",
+					"",
+					"SEC_MCU_GPIO",
+					"SEC_MCU_RST_N",
+					"SEC_MCU_RECOVERY_N";
+			};
+
+			// IO Mezz 1 FRU EEPROM
+			eeprom@50 {
+				compatible = "atmel,24c64";
+				reg = <0x50>;
+			};
+
+			// OSFP 1 FRU EEPROM
+			eeprom@52 {
+				compatible = "atmel,24c128";
+				reg = <0x52>;
+			};
+		};
+
+		i2c0mux4ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux4ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+	};
+
+	i2c-mux@77 {
+		compatible = "nxp,pca9546";
+		reg = <0x77>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		i2c-mux-idle-disconnect;
+
+		i2c0mux5ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			// IOB1 NIC0 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+
+		i2c0mux5ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		i2c0mux5ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		i2c0mux5ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+			// IOB1 NIC1 TEMP
+			temperature-sensor@1f {
+				compatible = "ti,tmp421";
+				reg = <0x1f>;
+			};
+		};
+	};
+};
+
+&i2c1 {
+	status = "okay";
+
+	// PDB
+	power-monitor@12 {
+		compatible = "ti,lm5066i";
+		reg = <0x12>;
+	};
+
+	// PDB
+	power-monitor@14 {
+		compatible = "ti,lm5066i";
+		reg = <0x14>;
+	};
+
+	// Module 0
+	fanctl0: fan-controller@20{
+		compatible = "maxim,max31790";
+		reg = <0x20>;
+	};
+
+	// Module 0
+	fanctl1: fan-controller@23{
+		compatible = "maxim,max31790";
+		reg = <0x23>;
+	};
+
+	// Module 1
+	fanctl2: fan-controller@2c{
+		compatible = "maxim,max31790";
+		reg = <0x2c>;
+	};
+
+	// Module 1
+	fanctl3: fan-controller@2f{
+		compatible = "maxim,max31790";
+		reg = <0x2f>;
+	};
+
+	// Module 0 Leak Sensor
+	adc@34 {
+		compatible = "maxim,max1363";
+		reg = <0x34>;
+	};
+
+	// Module 1 Leak Sensor
+	adc@35 {
+		compatible = "maxim,max1363";
+		reg = <0x35>;
+	};
+
+	// PDB TEMP SENSOR
+	temperature-sensor@4e {
+		compatible = "ti,tmp1075";
+		reg = <0x4e>;
+	};
+
+	// PDB FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c02";
+		reg = <0x50>;
+	};
+
+	// PDB
+	vrm@60 {
+		compatible = "renesas,raa228004";
+		reg = <0x60>;
+	};
+
+	// PDB
+	vrm@61 {
+		compatible = "renesas,raa228004";
+		reg = <0x61>;
+	};
+
+	// Interposer
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		i2c1mux0ch0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0>;
+		};
+
+		i2c1mux0ch1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x1>;
+		};
+
+		i2c1mux0ch2: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x2>;
+		};
+
+		i2c1mux0ch3: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x3>;
+		};
+
+		i2c1mux0ch4: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x4>;
+		};
+
+		i2c1mux0ch5: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x5>;
+
+			// Interposer TEMP SENSOR
+			temperature-sensor@4f {
+				compatible = "ti,tmp75";
+				reg = <0x4f>;
+			};
+
+			// Interposer FRU EEPROM
+			eeprom@54 {
+				compatible = "atmel,24c64";
+				reg = <0x54>;
+			};
+		};
+
+		i2c1mux0ch6: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x6>;
+
+			// Interposer IOEXP
+			io_expander5: gpio@27 {
+				compatible = "nxp,pca9554";
+				reg = <0x27>;
+				gpio-controller;
+				#gpio-cells = <2>;
+				gpio-line-names =
+					"JTAG_MUX_SEL",
+					"IOX_BMC_RESET",
+					"RTC_CLR_L",
+					"RTC_U77_ALRT_N",
+					"",
+					"PSU_ALERT_N",
+					"",
+					"RST_P12V_STBY_N";
+			};
+		};
+
+		i2c1mux0ch7: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x7>;
+
+			// FIO TEMP SENSOR
+			temperature-sensor@4b {
+				compatible = "ti,tmp75";
+				reg = <0x4b>;
+			};
+
+			// FIO FRU EEPROM
+			eeprom@51 {
+				compatible = "atmel,24c64";
+				reg = <0x51>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	// Module 0, Expander @0x20
+	io_expander0: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"FPGA_THERM_OVERT_L-I",
+			"FPGA_READY_BMC-I",
+			"HMC_BMC_DETECT-O",
+			"HMC_PGOOD-O",
+			"",
+			"BMC_STBY_CYCLE-O",
+			"FPGA_EROT_FATAL_ERROR_L-I",
+			"WP_HW_EXT_CTRL_L-O",
+			"EROT_FPGA_RST_L-O",
+			"FPGA_EROT_RECOVERY_L-O",
+			"BMC_EROT_FPGA_SPI_MUX_SEL-O",
+			"USB2_HUB_RST_L-O",
+			"",
+			"SGPIO_EN_L-O",
+			"B2B_IOEXP_INT_L-I",
+			"I2C_BUS_MUX_RESET_L-O";
+	};
+
+	// Module 1, Expander @0x21
+	io_expander1: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"SEC_FPGA_THERM_OVERT_L",
+			"SEC_FPGA_READY_BMC",
+			"SEC_HMC_BMC_DETECT",
+			"SEC_HMC_PGOOD",
+			"",
+			"SEC_BMC_SELF_POWER_CYCLE",
+			"SEC_SEC_FPGA_EROT_FATAL_ERROR_L",
+			"SEC_WP_HW_EXT_CTRL_L",
+			"SEC_EROT_FPGA_RST_L",
+			"SEC_FPGA_EROT_RECOVERY_L",
+			"SEC_BMC_EROT_FPGA_SPI_MUX_SEL",
+			"SEC_USB2_HUB_RST_L",
+			"",
+			"SEC_SGPIO_EN_L",
+			"SEC_IOB_IOEXP_INT_L",
+			"SEC_I2C_BUS_MUX_RESET_L";
+	};
+
+	// HMC Expander @0x27
+	io_expander2: gpio@27 {
+		compatible = "nxp,pca9555";
+		reg = <0x27>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"HMC_PRSNT_L-I",
+			"HMC_READY-I",
+			"HMC_EROT_FATAL_ERROR_L-I",
+			"I2C_MUX_SEL-O",
+			"HMC_EROT_SPI_MUX_SEL-O",
+			"HMC_EROT_RECOVERY_L-O",
+			"HMC_EROT_RST_L-O",
+			"GLOBAL_WP_HMC-O",
+			"FPGA_RST_L-O",
+			"USB2_HUB_RST-O",
+			"CPU_UART_MUX_SEL-O",
+			"",
+			"",
+			"",
+			"",
+			"";
+	};
+
+	// Module 0 Aux EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// Module 1 Aux EEPROM
+	eeprom@51 {
+		compatible = "atmel,24c64";
+		reg = <0x51>;
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+	io_expander3: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"RTC_MUX_SEL",
+			"PCI_MUX_SEL",
+			"TPM_MUX_SEL",
+			"FAN_MUX-SEL",
+			"SGMII_MUX_SEL",
+			"DP_MUX_SEL",
+			"UPHY3_USB_SEL",
+			"NCSI_MUX_SEL",
+			"BMC_PHY_RST",
+			"RTC_CLR_L",
+			"BMC_12V_CTRL",
+			"PS_RUN_IO0_PG",
+			"",
+			"",
+			"",
+			"";
+	};
+
+	rtc@6f {
+		compatible = "nuvoton,nct3018y";
+		reg = <0x6f>;
+	};
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+};
+
+&i2c9 {
+	status = "okay";
+	// SCM TEMP SENSOR BOARD
+	temperature-sensor@4b {
+		compatible = "national,lm75b";
+		reg = <0x4b>;
+	};
+
+	// SCM CPLD IOEXP
+	io_expander4: gpio@4f {
+		compatible = "nxp,pca9555";
+		reg = <0x4f>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"stby_power_en_cpld",
+			"stby_power_gd_cpld",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"";
+	};
+
+	// SCM FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// BSM FRU EEPROM
+	eeprom@56 {
+		compatible = "atmel,24c64";
+		reg = <0x56>;
+	};
+};
+
+&i2c10 {
+	status = "okay";
+	multi-master;
+	mctp-controller;
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	// OCP NIC0 TEMP
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+
+	// OCP NIC0 FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	ssif-bmc@10 {
+		compatible = "ssif-bmc";
+		reg = <0x10>;
+	};
+};
+
+&i2c12 {
+	status = "okay";
+	multi-master;
+
+	// HPM 1 FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+	// CBC 2 FRU
+	eeprom@54 {
+		compatible = "atmel,24c02";
+		reg = <0x54>;
+	};
+	// CBC 3 FRU
+	eeprom@55 {
+		compatible = "atmel,24c02";
+		reg = <0x55>;
+	};
+};
+
+&i2c13 {
+	status = "okay";
+	multi-master;
+
+	// HPM FRU EEPROM
+	eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+	};
+
+	// CBC 0 FRU
+	eeprom@54 {
+		compatible = "atmel,24c02";
+		reg = <0x54>;
+	};
+
+	// CBC 1 FRU
+	eeprom@55 {
+		compatible = "atmel,24c02";
+		reg = <0x55>;
+	};
+
+	// HMC FRU EEPROM
+	eeprom@57 {
+		compatible = "atmel,24c02";
+		reg = <0x57>;
+	};
+};
+
+&i2c14 {
+	status = "okay";
+
+	// PDB CPLD IOEXP 0x10
+	io_expander9: gpio@10 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x10>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"wSequence_Latch_State_N",
+			"wP12V_N1N2_RUNTIME_FLT_N",
+			"wP12V_FAN_RUNTIME_FLT_N",
+			"wP12V_AUX_RUNTIME_FLT_N",
+			"wHost_PERST_SEQPWR_FLT_N",
+			"wP12V_N1N2_SEQPWR_FLT_N",
+			"wP12V_FAN_SEQPWR_FLT_N",
+			"wP12V_AUX_SEQPWR_FLT_N",
+			"wP12V_RUNTIME_FLT_NIC1_N",
+			"wAUX_RUNTIME_FLT_NIC1_N",
+			"wP12V_SEQPWR_FLT_NIC1_N",
+			"wAUX_SEQPWR_FLT_NIC1_N",
+			"wP12V_RUNTIME_FLT_NIC0_N",
+			"wAUX_RUNTIME_FLT_NIC0_N",
+			"wP12V_SEQPWR_FLT_NIC0_N",
+			"wAUX_SEQPWR_FLT_NIC0_N";
+	};
+
+	// PDB CPLD IOEXP 0x11
+	io_expander10: gpio@11 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x11>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"FM_P12V_NIC1_FLTB_R_N",
+			"FM_P3V3_NIC1_FAULT_R_N",
+			"FM_P12V_NIC0_FLTB_R_N",
+			"FM_P3V3_NIC0_FAULT_R_N",
+			"P48V_HS2_FAULT_N_PLD",
+			"P48V_HS1_FAULT_N_PLD",
+			"P12V_AUX_FAN_OC_PLD_N",
+			"P12V_AUX_FAN_FAULT_PLD_N",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"FM_SYS_THROTTLE_N",
+			"OCP_V3_2_PWRBRK_FROM_HOST_ISO_PLD_N",
+			"OCP_SFF_PWRBRK_FROM_HOST_ISO_PLD_N";
+	};
+
+	// PDB CPLD IOEXP 0x12
+	io_expander11: gpio@12 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x12>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"P12V_AUX_PSU_SMB_ALERT_R_L",
+			"P12V_SCM_SENSE_ALERT_R_N",
+			"P12V_AUX_NIC1_SENSE_ALERT_R_N",
+			"P12V_AUX_NIC0_SENSE_ALERT_R_N",
+			"NODEB_PSU_SMB_ALERT_R_L",
+			"NODEA_PSU_SMB_ALERT_R_L",
+			"P12V_AUX_FAN_ALERT_PLD_N",
+			"P52V_SENSE_ALERT_PLD_N",
+			"PRSNT_RJ45_FIO_N_R",
+			"FM_MAIN_PWREN_RMC_EN_ISO_R",
+			"CHASSIS3_LEAK_Q_N_PLD",
+			"CHASSIS2_LEAK_Q_N_PLD",
+			"CHASSIS1_LEAK_Q_N_PLD",
+			"CHASSIS0_LEAK_Q_N_PLD",
+			"",
+			"SMB_RJ45_FIO_TMP_ALERT";
+	};
+
+	// PDB CPLD IOEXP 0x13
+	io_expander12: gpio@13 {
+		compatible = "nxp,pca9555";
+		interrupt-parent = <&gpio0>;
+		interrupts = <ASPEED_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
+		reg = <0x13>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"FAN_7_PRESENT_N",
+			"FAN_6_PRESENT_N",
+			"FAN_5_PRESENT_N",
+			"FAN_4_PRESENT_N",
+			"FAN_3_PRESENT_N",
+			"FAN_2_PRESENT_N",
+			"FAN_1_PRESENT_N",
+			"FAN_0_PRESENT_N",
+			"HP_LVC3_OCP_V3_2_PRSNT2_PLD_N",
+			"HP_LVC3_OCP_V3_1_PRSNT2_PLD_N",
+			"PRSNT_HDDBD_POWER_CABLE_N",
+			"PRSNT_OSFP0_POWER_CABLE_N",
+			"PRSNT_CHASSIS3_LEAK_CABLE_R_N",
+			"PRSNT_CHASSIS2_LEAK_CABLE_R_N",
+			"PRSNT_CHASSIS1_LEAK_CABLE_R_N",
+			"PRSNT_CHASSIS0_LEAK_CABLE_R_N";
+	};
+
+	// PDB CPLD IOEXP 0x14
+	io_expander13: gpio@14 {
+		compatible = "nxp,pca9555";
+		reg = <0x14>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names =
+			"rmc_en_dc_pwr_on",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"",
+			"leak_config_0",
+			"leak_config_1",
+			"leak_config_2",
+			"leak_config_3",
+			"mfg_led_test_mode_l",
+			"small_leak_err_inj",
+			"large_leak_err_inj",
+			"";
+	};
+};
+
+&i2c15 {
+	status = "okay";
+	multi-master;
+	mctp-controller;
+	mctp@10 {
+		compatible = "mctp-i2c-controller";
+		reg = <(0x10 | I2C_OWN_SLAVE_ADDRESS)>;
+	};
+
+	// OCP NIC1 TEMP
+	temperature-sensor@1f {
+		compatible = "ti,tmp421";
+		reg = <0x1f>;
+	};
+
+	// OCP NIC1 FRU EEPROM
+	eeprom@52 {
+		compatible = "atmel,24c64";
+		reg = <0x52>;
+	};
+};
+
+&mac2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ncsi3_default>;
+	use-ncsi;
+};
+
+&mac3 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ncsi4_default>;
+	use-ncsi;
+};
+
+&udma {
+	status = "okay";
+};
+
+&uart1 {
+	status = "okay";
+};
+
+&uart3 {
+	status = "okay";
+};
+
+&uart4 {
+	status = "okay";
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&wdt1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdtrst1_default>;
+	aspeed,reset-type = "soc";
+	aspeed,external-signal;
+	aspeed,ext-push-pull;
+	aspeed,ext-active-high;
+	aspeed,ext-pulse-duration = <256>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dts
new file mode 100644
index 000000000000..58c107a1b6cf
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-darwin.dts
@@ -0,0 +1,72 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2021 Facebook Inc.
+
+/dts-v1/;
+
+#include "ast2600-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Darwin BMC";
+	compatible = "facebook,darwin-bmc", "aspeed,ast2600";
+
+	aliases {
+		serial0 = &uart5;
+		serial1 = &uart1;
+		serial2 = &uart2;
+		serial3 = &uart3;
+	};
+
+	chosen {
+		stdout-path = &uart5;
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,
+			      <&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,
+			      <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,
+			      <&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;
+	};
+
+	spi_gpio: spi {
+		num-chipselects = <1>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>;
+	};
+};
+
+&i2c0 {
+	eeprom@50 {
+		compatible = "atmel,24c512";
+		reg = <0x50>;
+	};
+};
+
+&adc0 {
+	status = "okay";
+
+	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default
+		     &pinctrl_adc2_default &pinctrl_adc3_default
+		     &pinctrl_adc4_default &pinctrl_adc5_default
+		     &pinctrl_adc6_default &pinctrl_adc7_default>;
+};
+
+&adc1 {
+	status = "okay";
+
+	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default
+		     &pinctrl_adc10_default &pinctrl_adc11_default
+		     &pinctrl_adc12_default &pinctrl_adc13_default
+		     &pinctrl_adc14_default &pinctrl_adc15_default>;
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+
+	non-removable;
+	max-frequency = <25000000>;
+	bus-width = <4>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts
index 74f3c67e0eff..ff1009ea1c49 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-elbert.dts
@@ -201,3 +201,15 @@
 		full-duplex;
 	};
 };
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+
+	non-removable;
+	max-frequency = <25000000>;
+	bus-width = <4>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dts
new file mode 100644
index 000000000000..aa9576d8ab56
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji-data64.dts
@@ -0,0 +1,1256 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+#include "ast2600-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Fuji BMC (64MB Datastore)";
+	compatible = "facebook,fuji-data64-bmc", "aspeed,ast2600";
+
+	aliases {
+		/*
+		 * PCA9548 (2-0070) provides 8 channels connecting to
+		 * SCM (System Controller Module).
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * PCA9548 (8-0070) provides 8 channels connecting to
+		 * SMB (Switch Main Board).
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		/*
+		 * PCA9548 (11-0077) provides 8 channels connecting to
+		 * SMB (Switch Main Board).
+		 */
+		i2c40 = &imux40;
+		i2c41 = &imux41;
+		i2c42 = &imux42;
+		i2c43 = &imux43;
+		i2c44 = &imux44;
+		i2c45 = &imux45;
+		i2c46 = &imux46;
+		i2c47 = &imux47;
+
+		/*
+		 * PCA9548 (24-0071) provides 8 channels connecting to
+		 * PDB-Left.
+		 */
+		i2c48 = &imux48;
+		i2c49 = &imux49;
+		i2c50 = &imux50;
+		i2c51 = &imux51;
+		i2c52 = &imux52;
+		i2c53 = &imux53;
+		i2c54 = &imux54;
+		i2c55 = &imux55;
+
+		/*
+		 * PCA9548 (25-0072) provides 8 channels connecting to
+		 * PDB-Right.
+		 */
+		i2c56 = &imux56;
+		i2c57 = &imux57;
+		i2c58 = &imux58;
+		i2c59 = &imux59;
+		i2c60 = &imux60;
+		i2c61 = &imux61;
+		i2c62 = &imux62;
+		i2c63 = &imux63;
+
+		/*
+		 * PCA9548 (26-0076) provides 8 channels connecting to
+		 * FCM1.
+		 */
+		i2c64 = &imux64;
+		i2c65 = &imux65;
+		i2c66 = &imux66;
+		i2c67 = &imux67;
+		i2c68 = &imux68;
+		i2c69 = &imux69;
+		i2c70 = &imux70;
+		i2c71 = &imux71;
+
+		/*
+		 * PCA9548 (27-0076) provides 8 channels connecting to
+		 * FCM2.
+		 */
+		i2c72 = &imux72;
+		i2c73 = &imux73;
+		i2c74 = &imux74;
+		i2c75 = &imux75;
+		i2c76 = &imux76;
+		i2c77 = &imux77;
+		i2c78 = &imux78;
+		i2c79 = &imux79;
+
+		/*
+		 * PCA9548 (40-0076) provides 8 channels connecting to
+		 * PIM1.
+		 */
+		i2c80 = &imux80;
+		i2c81 = &imux81;
+		i2c82 = &imux82;
+		i2c83 = &imux83;
+		i2c84 = &imux84;
+		i2c85 = &imux85;
+		i2c86 = &imux86;
+		i2c87 = &imux87;
+
+		/*
+		 * PCA9548 (41-0076) provides 8 channels connecting to
+		 * PIM2.
+		 */
+		i2c88 = &imux88;
+		i2c89 = &imux89;
+		i2c90 = &imux90;
+		i2c91 = &imux91;
+		i2c92 = &imux92;
+		i2c93 = &imux93;
+		i2c94 = &imux94;
+		i2c95 = &imux95;
+
+		/*
+		 * PCA9548 (42-0076) provides 8 channels connecting to
+		 * PIM3.
+		 */
+		i2c96 = &imux96;
+		i2c97 = &imux97;
+		i2c98 = &imux98;
+		i2c99 = &imux99;
+		i2c100 = &imux100;
+		i2c101 = &imux101;
+		i2c102 = &imux102;
+		i2c103 = &imux103;
+
+		/*
+		 * PCA9548 (43-0076) provides 8 channels connecting to
+		 * PIM4.
+		 */
+		i2c104 = &imux104;
+		i2c105 = &imux105;
+		i2c106 = &imux106;
+		i2c107 = &imux107;
+		i2c108 = &imux108;
+		i2c109 = &imux109;
+		i2c110 = &imux110;
+		i2c111 = &imux111;
+
+		/*
+		 * PCA9548 (44-0076) provides 8 channels connecting to
+		 * PIM5.
+		 */
+		i2c112 = &imux112;
+		i2c113 = &imux113;
+		i2c114 = &imux114;
+		i2c115 = &imux115;
+		i2c116 = &imux116;
+		i2c117 = &imux117;
+		i2c118 = &imux118;
+		i2c119 = &imux119;
+
+		/*
+		 * PCA9548 (45-0076) provides 8 channels connecting to
+		 * PIM6.
+		 */
+		i2c120 = &imux120;
+		i2c121 = &imux121;
+		i2c122 = &imux122;
+		i2c123 = &imux123;
+		i2c124 = &imux124;
+		i2c125 = &imux125;
+		i2c126 = &imux126;
+		i2c127 = &imux127;
+
+		/*
+		 * PCA9548 (46-0076) provides 8 channels connecting to
+		 * PIM7.
+		 */
+		i2c128 = &imux128;
+		i2c129 = &imux129;
+		i2c130 = &imux130;
+		i2c131 = &imux131;
+		i2c132 = &imux132;
+		i2c133 = &imux133;
+		i2c134 = &imux134;
+		i2c135 = &imux135;
+
+		/*
+		 * PCA9548 (47-0076) provides 8 channels connecting to
+		 * PIM8.
+		 */
+		i2c136 = &imux136;
+		i2c137 = &imux137;
+		i2c138 = &imux138;
+		i2c139 = &imux139;
+		i2c140 = &imux140;
+		i2c141 = &imux141;
+		i2c142 = &imux142;
+		i2c143 = &imux143;
+	};
+
+	spi_gpio: spi {
+		num-chipselects = <3>;
+		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>,
+			   <0>,	/* device reg=<1> does not exist */
+			   <&gpio0 ASPEED_GPIO(X, 2) GPIO_ACTIVE_HIGH>;
+
+		eeprom@2 {
+			compatible = "atmel,at93c46d";
+			spi-max-frequency = <250000>;
+			data-size = <16>;
+			spi-cs-high;
+			reg = <2>;
+		};
+	};
+};
+
+&fmc {
+	flash@0 {
+		/delete-node/partitions;
+#include "facebook-bmc-flash-layout-128-data64.dtsi"
+	};
+};
+
+&i2c0 {
+	multi-master;
+	bus-frequency = <1000000>;
+};
+
+&i2c2 {
+	/*
+	 * PCA9548 (2-0070) provides 8 channels connecting to SCM (System
+	 * Controller Module).
+	 */
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			adm1278@10 {
+				compatible = "adi,adm1278";
+				reg = <0x10>;
+				shunt-resistor-micro-ohms = <1500>;
+			};
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c8 {
+	/*
+	 * PCA9548 (8-0070) provides 8 channels connecting to SMB (Switch
+	 * Main Board).
+	 */
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-mux@71 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x71>;
+				i2c-mux-idle-disconnect;
+
+				imux48: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux49: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux50: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+
+					lp5012@14 {
+						compatible = "ti,lp5012";
+						reg = <0x14>;
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						multi-led@0 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <0>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "sys";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+
+						multi-led@1 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <1>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "fan";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+
+						multi-led@2 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <2>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "psu";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+
+						multi-led@3 {
+							#address-cells = <1>;
+							#size-cells = <0>;
+							reg = <3>;
+							color = <LED_COLOR_ID_MULTI>;
+							function = LED_FUNCTION_ACTIVITY;
+							label = "smb";
+
+							led@0 {
+								reg = <0>;
+								color = <LED_COLOR_ID_RED>;
+							};
+
+							led@1 {
+								reg = <1>;
+								color = <LED_COLOR_ID_BLUE>;
+							};
+
+							led@2 {
+								reg = <2>;
+								color = <LED_COLOR_ID_GREEN>;
+							};
+						};
+					};
+				};
+
+				imux51: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux52: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux53: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux54: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux55: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@72 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x72>;
+				i2c-mux-idle-disconnect;
+
+				imux56: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux57: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux58: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux59: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux60: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux61: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux62: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux63: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux64: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux65: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux66: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux67: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+
+					adm1278@10 {
+						compatible = "adi,adm1278";
+						reg = <0x10>;
+						shunt-resistor-micro-ohms = <250>;
+					};
+				};
+
+				imux68: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux69: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux70: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux71: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux72: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux73: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux74: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux75: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+
+					adm1278@10 {
+						compatible = "adi,adm1278";
+						reg = <0x10>;
+						shunt-resistor-micro-ohms = <250>;
+					};
+				};
+
+				imux76: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux77: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux78: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux79: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
+	};
+};
+
+&i2c11 {
+	status = "okay";
+
+	/*
+	 * PCA9548 (11-0077) provides 8 channels connecting to SMB (Switch
+	 * Main Board).
+	 */
+	i2c-mux@77 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x77>;
+		i2c-mux-idle-disconnect;
+
+		imux40: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux80: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux81: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux82: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux83: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux84: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux85: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux86: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux87: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux41: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux88: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux89: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux90: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux91: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux92: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux93: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux94: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux95: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux42: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux96: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux97: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux98: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux99: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux100: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux101: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux102: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux103: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux43: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux104: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux105: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux106: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux107: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux108: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux109: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux110: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux111: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux44: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux112: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux113: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux114: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux115: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux116: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux117: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux118: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux119: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux45: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux120: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux121: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux122: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux123: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux124: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux125: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux126: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux127: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux46: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux128: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux129: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux130: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux131: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux132: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux133: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux134: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux135: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+		imux47: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+
+			i2c-mux@76 {
+				compatible = "nxp,pca9548";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <0x76>;
+				i2c-mux-idle-disconnect;
+
+				imux136: i2c@0 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <0>;
+				};
+
+				imux137: i2c@1 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <1>;
+				};
+
+				imux138: i2c@2 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <2>;
+				};
+
+				imux139: i2c@3 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <3>;
+				};
+
+				imux140: i2c@4 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <4>;
+				};
+
+				imux141: i2c@5 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <5>;
+				};
+
+				imux142: i2c@6 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <6>;
+				};
+
+				imux143: i2c@7 {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <7>;
+				};
+			};
+
+		};
+
+	};
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&mdio1 {
+	status = "okay";
+
+	ethphy3: ethernet-phy@13 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x0d>;
+	};
+};
+
+&emmc_controller {
+	status = "okay";
+};
+
+&emmc {
+	status = "okay";
+
+	non-removable;
+	max-frequency = <25000000>;
+	bus-width = <4>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts
index f23c26a3441d..5dc2a165e441 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-fuji.dts
@@ -1,1251 +1,16 @@
 // SPDX-License-Identifier: GPL-2.0+
 // Copyright (c) 2020 Facebook Inc.
 
-/dts-v1/;
-
-#include <dt-bindings/leds/common.h>
-#include "ast2600-facebook-netbmc-common.dtsi"
+#include "aspeed-bmc-facebook-fuji-data64.dts"
 
 / {
 	model = "Facebook Fuji BMC";
 	compatible = "facebook,fuji-bmc", "aspeed,ast2600";
-
-	aliases {
-		/*
-		 * PCA9548 (2-0070) provides 8 channels connecting to
-		 * SCM (System Controller Module).
-		 */
-		i2c16 = &imux16;
-		i2c17 = &imux17;
-		i2c18 = &imux18;
-		i2c19 = &imux19;
-		i2c20 = &imux20;
-		i2c21 = &imux21;
-		i2c22 = &imux22;
-		i2c23 = &imux23;
-
-		/*
-		 * PCA9548 (8-0070) provides 8 channels connecting to
-		 * SMB (Switch Main Board).
-		 */
-		i2c24 = &imux24;
-		i2c25 = &imux25;
-		i2c26 = &imux26;
-		i2c27 = &imux27;
-		i2c28 = &imux28;
-		i2c29 = &imux29;
-		i2c30 = &imux30;
-		i2c31 = &imux31;
-
-		/*
-		 * PCA9548 (11-0077) provides 8 channels connecting to
-		 * SMB (Switch Main Board).
-		 */
-		i2c40 = &imux40;
-		i2c41 = &imux41;
-		i2c42 = &imux42;
-		i2c43 = &imux43;
-		i2c44 = &imux44;
-		i2c45 = &imux45;
-		i2c46 = &imux46;
-		i2c47 = &imux47;
-
-		/*
-		 * PCA9548 (24-0071) provides 8 channels connecting to
-		 * PDB-Left.
-		 */
-		i2c48 = &imux48;
-		i2c49 = &imux49;
-		i2c50 = &imux50;
-		i2c51 = &imux51;
-		i2c52 = &imux52;
-		i2c53 = &imux53;
-		i2c54 = &imux54;
-		i2c55 = &imux55;
-
-		/*
-		 * PCA9548 (25-0072) provides 8 channels connecting to
-		 * PDB-Right.
-		 */
-		i2c56 = &imux56;
-		i2c57 = &imux57;
-		i2c58 = &imux58;
-		i2c59 = &imux59;
-		i2c60 = &imux60;
-		i2c61 = &imux61;
-		i2c62 = &imux62;
-		i2c63 = &imux63;
-
-		/*
-		 * PCA9548 (26-0076) provides 8 channels connecting to
-		 * FCM1.
-		 */
-		i2c64 = &imux64;
-		i2c65 = &imux65;
-		i2c66 = &imux66;
-		i2c67 = &imux67;
-		i2c68 = &imux68;
-		i2c69 = &imux69;
-		i2c70 = &imux70;
-		i2c71 = &imux71;
-
-		/*
-		 * PCA9548 (27-0076) provides 8 channels connecting to
-		 * FCM2.
-		 */
-		i2c72 = &imux72;
-		i2c73 = &imux73;
-		i2c74 = &imux74;
-		i2c75 = &imux75;
-		i2c76 = &imux76;
-		i2c77 = &imux77;
-		i2c78 = &imux78;
-		i2c79 = &imux79;
-
-		/*
-		 * PCA9548 (40-0076) provides 8 channels connecting to
-		 * PIM1.
-		 */
-		i2c80 = &imux80;
-		i2c81 = &imux81;
-		i2c82 = &imux82;
-		i2c83 = &imux83;
-		i2c84 = &imux84;
-		i2c85 = &imux85;
-		i2c86 = &imux86;
-		i2c87 = &imux87;
-
-		/*
-		 * PCA9548 (41-0076) provides 8 channels connecting to
-		 * PIM2.
-		 */
-		i2c88 = &imux88;
-		i2c89 = &imux89;
-		i2c90 = &imux90;
-		i2c91 = &imux91;
-		i2c92 = &imux92;
-		i2c93 = &imux93;
-		i2c94 = &imux94;
-		i2c95 = &imux95;
-
-		/*
-		 * PCA9548 (42-0076) provides 8 channels connecting to
-		 * PIM3.
-		 */
-		i2c96 = &imux96;
-		i2c97 = &imux97;
-		i2c98 = &imux98;
-		i2c99 = &imux99;
-		i2c100 = &imux100;
-		i2c101 = &imux101;
-		i2c102 = &imux102;
-		i2c103 = &imux103;
-
-		/*
-		 * PCA9548 (43-0076) provides 8 channels connecting to
-		 * PIM4.
-		 */
-		i2c104 = &imux104;
-		i2c105 = &imux105;
-		i2c106 = &imux106;
-		i2c107 = &imux107;
-		i2c108 = &imux108;
-		i2c109 = &imux109;
-		i2c110 = &imux110;
-		i2c111 = &imux111;
-
-		/*
-		 * PCA9548 (44-0076) provides 8 channels connecting to
-		 * PIM5.
-		 */
-		i2c112 = &imux112;
-		i2c113 = &imux113;
-		i2c114 = &imux114;
-		i2c115 = &imux115;
-		i2c116 = &imux116;
-		i2c117 = &imux117;
-		i2c118 = &imux118;
-		i2c119 = &imux119;
-
-		/*
-		 * PCA9548 (45-0076) provides 8 channels connecting to
-		 * PIM6.
-		 */
-		i2c120 = &imux120;
-		i2c121 = &imux121;
-		i2c122 = &imux122;
-		i2c123 = &imux123;
-		i2c124 = &imux124;
-		i2c125 = &imux125;
-		i2c126 = &imux126;
-		i2c127 = &imux127;
-
-		/*
-		 * PCA9548 (46-0076) provides 8 channels connecting to
-		 * PIM7.
-		 */
-		i2c128 = &imux128;
-		i2c129 = &imux129;
-		i2c130 = &imux130;
-		i2c131 = &imux131;
-		i2c132 = &imux132;
-		i2c133 = &imux133;
-		i2c134 = &imux134;
-		i2c135 = &imux135;
-
-		/*
-		 * PCA9548 (47-0076) provides 8 channels connecting to
-		 * PIM8.
-		 */
-		i2c136 = &imux136;
-		i2c137 = &imux137;
-		i2c138 = &imux138;
-		i2c139 = &imux139;
-		i2c140 = &imux140;
-		i2c141 = &imux141;
-		i2c142 = &imux142;
-		i2c143 = &imux143;
-	};
-
-	spi_gpio: spi {
-		num-chipselects = <3>;
-		cs-gpios = <&gpio0 ASPEED_GPIO(X, 0) GPIO_ACTIVE_LOW>,
-			   <0>,	/* device reg=<1> does not exist */
-			   <&gpio0 ASPEED_GPIO(X, 2) GPIO_ACTIVE_HIGH>;
-
-		eeprom@2 {
-			compatible = "atmel,at93c46d";
-			spi-max-frequency = <250000>;
-			data-size = <16>;
-			spi-cs-high;
-			reg = <2>;
-		};
-	};
 };
 
-&i2c0 {
-	multi-master;
-	bus-frequency = <1000000>;
-};
-
-&i2c2 {
-	/*
-	 * PCA9548 (2-0070) provides 8 channels connecting to SCM (System
-	 * Controller Module).
-	 */
-	i2c-mux@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		imux16: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			adm1278@10 {
-				compatible = "adi,adm1278";
-				reg = <0x10>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				shunt-resistor-micro-ohms = <1500>;
-			};
-		};
-
-		imux17: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux18: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux19: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux20: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux21: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux22: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux23: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-&i2c8 {
-	/*
-	 * PCA9548 (8-0070) provides 8 channels connecting to SMB (Switch
-	 * Main Board).
-	 */
-	i2c-mux@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		imux24: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			i2c-mux@71 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x71>;
-				i2c-mux-idle-disconnect;
-
-				imux48: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux49: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux50: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-
-					lp5012@14 {
-						compatible = "ti,lp5012";
-						reg = <0x14>;
-						#address-cells = <1>;
-						#size-cells = <0>;
-
-						multi-led@0 {
-							#address-cells = <1>;
-							#size-cells = <0>;
-							reg = <0>;
-							color = <LED_COLOR_ID_MULTI>;
-							function = LED_FUNCTION_ACTIVITY;
-							label = "sys";
-
-							led@0 {
-								reg = <0>;
-								color = <LED_COLOR_ID_RED>;
-							};
-
-							led@1 {
-								reg = <1>;
-								color = <LED_COLOR_ID_BLUE>;
-							};
-
-							led@2 {
-								reg = <2>;
-								color = <LED_COLOR_ID_GREEN>;
-							};
-						};
-
-						multi-led@1 {
-							#address-cells = <1>;
-							#size-cells = <0>;
-							reg = <1>;
-							color = <LED_COLOR_ID_MULTI>;
-							function = LED_FUNCTION_ACTIVITY;
-							label = "fan";
-
-							led@0 {
-								reg = <0>;
-								color = <LED_COLOR_ID_RED>;
-							};
-
-							led@1 {
-								reg = <1>;
-								color = <LED_COLOR_ID_BLUE>;
-							};
-
-							led@2 {
-								reg = <2>;
-								color = <LED_COLOR_ID_GREEN>;
-							};
-						};
-
-						multi-led@2 {
-							#address-cells = <1>;
-							#size-cells = <0>;
-							reg = <2>;
-							color = <LED_COLOR_ID_MULTI>;
-							function = LED_FUNCTION_ACTIVITY;
-							label = "psu";
-
-							led@0 {
-								reg = <0>;
-								color = <LED_COLOR_ID_RED>;
-							};
-
-							led@1 {
-								reg = <1>;
-								color = <LED_COLOR_ID_BLUE>;
-							};
-
-							led@2 {
-								reg = <2>;
-								color = <LED_COLOR_ID_GREEN>;
-							};
-						};
-
-						multi-led@3 {
-							#address-cells = <1>;
-							#size-cells = <0>;
-							reg = <3>;
-							color = <LED_COLOR_ID_MULTI>;
-							function = LED_FUNCTION_ACTIVITY;
-							label = "smb";
-
-							led@0 {
-								reg = <0>;
-								color = <LED_COLOR_ID_RED>;
-							};
-
-							led@1 {
-								reg = <1>;
-								color = <LED_COLOR_ID_BLUE>;
-							};
-
-							led@2 {
-								reg = <2>;
-								color = <LED_COLOR_ID_GREEN>;
-							};
-						};
-					};
-				};
-
-				imux51: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux52: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux53: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux54: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux55: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux25: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			i2c-mux@72 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x72>;
-				i2c-mux-idle-disconnect;
-
-				imux56: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux57: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux58: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux59: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux60: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux61: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux62: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux63: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux26: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			i2c-mux@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux64: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux65: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux66: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux67: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-
-					adm1278@10 {
-						compatible = "adi,adm1278";
-						reg = <0x10>;
-						#address-cells = <1>;
-						#size-cells = <0>;
-						shunt-resistor-micro-ohms = <250>;
-					};
-				};
-
-				imux68: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux69: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux70: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux71: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux27: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			i2c-mux@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux72: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux73: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux74: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux75: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-
-					adm1278@10 {
-						compatible = "adi,adm1278";
-						reg = <0x10>;
-						#address-cells = <1>;
-						#size-cells = <0>;
-						shunt-resistor-micro-ohms = <250>;
-					};
-				};
-
-				imux76: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux77: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux78: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux79: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux28: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux29: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux30: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux31: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-
+&fmc {
+	flash@0 {
+		/delete-node/partitions;
+#include "facebook-bmc-flash-layout-128.dtsi"
 	};
 };
-
-&i2c11 {
-	status = "okay";
-
-	/*
-	 * PCA9548 (11-0077) provides 8 channels connecting to SMB (Switch
-	 * Main Board).
-	 */
-	i2c-mux@77 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x77>;
-		i2c-mux-idle-disconnect;
-
-		imux40: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-
-			i2c-mux@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux80: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux81: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux82: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux83: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux84: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux85: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux86: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux87: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux41: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-
-			i2c-mux@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux88: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux89: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux90: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux91: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux92: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux93: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux94: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux95: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux42: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-
-			i2c-mux@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux96: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux97: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux98: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux99: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux100: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux101: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux102: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux103: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux43: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-
-			i2c-mux@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux104: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux105: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux106: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux107: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux108: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux109: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux110: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux111: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux44: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-
-			i2c-mux@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux112: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux113: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux114: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux115: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux116: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux117: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux118: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux119: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux45: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-
-			i2c-mux@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux120: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux121: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux122: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux123: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux124: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux125: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux126: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux127: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux46: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-
-			i2c-mux@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux128: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux129: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux130: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux131: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux132: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux133: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux134: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux135: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-		imux47: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-
-			i2c-mux@76 {
-				compatible = "nxp,pca9548";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				reg = <0x76>;
-				i2c-mux-idle-disconnect;
-
-				imux136: i2c@0 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <0>;
-				};
-
-				imux137: i2c@1 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <1>;
-				};
-
-				imux138: i2c@2 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <2>;
-				};
-
-				imux139: i2c@3 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <3>;
-				};
-
-				imux140: i2c@4 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <4>;
-				};
-
-				imux141: i2c@5 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <5>;
-				};
-
-				imux142: i2c@6 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <6>;
-				};
-
-				imux143: i2c@7 {
-					#address-cells = <1>;
-					#size-cells = <0>;
-					reg = <7>;
-				};
-			};
-
-		};
-
-	};
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&mdio1 {
-	status = "okay";
-
-	ethphy3: ethernet-phy@13 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <0x0d>;
-	};
-};
-
-&mac3 {
-	status = "okay";
-	phy-mode = "rgmii";
-	phy-handle = <&ethphy3>;
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_rgmii4_default>;
-};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
index b9a93f23bd0a..b733efe31e8d 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-harma.dts
@@ -183,11 +183,9 @@
 &i2c0 {
 	status = "okay";
 
-	pwm@5e{
-		compatible = "max31790";
+	pwm@5e {
+		compatible = "maxim,max31790";
 		reg = <0x5e>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 	};
 
 	power-sensor@40 {
@@ -234,7 +232,7 @@
 		"","",
 		"","",
 		"","",
-		"","fcb1-activate",
+		"","fcb2-activate",
 		"","";
 	};
 };
@@ -257,11 +255,9 @@
 &i2c2 {
 	status = "okay";
 
-	pwm@5e{
-		compatible = "max31790";
+	pwm@5e {
+		compatible = "maxim,max31790";
 		reg = <0x5e>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 	};
 
 	power-sensor@40 {
@@ -308,7 +304,7 @@
 		"","",
 		"","",
 		"","",
-		"","fcb0-activate",
+		"","fcb1-activate",
 		"","";
 	};
 };
@@ -373,6 +369,12 @@
 		compatible = "infineon,xdp710";
 		reg = <0x40>;
 	};
+
+	power-sensor@45 {
+		compatible = "ti,ina238";
+		reg = <0x45>;
+		shunt-resistor = <500>;
+	};
 };
 
 &i2c5 {
@@ -514,6 +516,10 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <0>;
+			power-sensor@20 {
+				compatible = "mps,mp5990";
+				reg = <0x20>;
+			};
 			power-monitor@61 {
 				compatible = "isil,isl69260";
 				reg = <0x61>;
@@ -692,14 +698,14 @@
 	"","",
 	/*A4-A7 line 8-15*/
 	"","power-config-asic-module-enable",
-	"","power-config-asic-power-good",
-	"","power-config-pdb-power-good",
+	"power-p3v3-standby","power-config-asic-power-good",
+	"power-p1v8-good","power-config-pdb-power-good",
 	"presence-cpu","smi-control-n",
 	/*B0-B3 line 16-23*/
 	"","nmi-control-n",
-	"","nmi-control-sync-flood-n",
-	"","",
+	"power-pvdd33-s5","nmi-control-sync-flood-n",
 	"","",
+	"power-pvdd18-s5","",
 	/*B4-B7 line 24-31*/
 	"","FM_CPU_SP5R1",
 	"reset-cause-rsmrst","FM_CPU_SP5R2",
@@ -743,7 +749,7 @@
 	/*F4-F7 line 88-95*/
 	"presence-asic-modules-0","rt-cpu0-p1-force-enable",
 	"presence-asic-modules-1","bios-debug-msg-disable",
-	"","uart-control-buffer-select",
+	"power-asic-good","uart-control-buffer-select",
 	"presence-cmm","ac-control-n",
 	/*G0-G3 line 96-103*/
 	"FM_CPU_CORETYPE2","",
@@ -795,7 +801,7 @@
 	"asic0-card-type-detection2-n","",
 	"uart-switch-lsb","",
 	"uart-switch-msb","",
-	"","",
+	"power-12v-memory-good","",
 	/*M4-M7 line 200-207*/
 	"","","","","","","","",
 	/*N0-N3 line 208-215*/
@@ -803,7 +809,10 @@
 	/*N4-N7 line 216-223*/
 	"","","","","","","","",
 	/*O0-O3 line 224-231*/
-	"","","","","","","","",
+	"","",
+	"irq-pvddcore0-ocp-alert","",
+	"irq-pvddcore1-ocp-alert","",
+	"","",
 	/*O4-O7 line 232-239*/
 	"","","","","","","","",
 	/*P0-P3 line 240-247*/
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
index ef96b17becb2..eb8d4b95596c 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-minerva.dts
@@ -312,11 +312,9 @@
 				reg = <0x50>;
 			};
 
-			pwm@5e{
-				compatible = "max31790";
+			pwm@5e {
+				compatible = "maxim,max31790";
 				reg = <0x5e>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 			};
 
 			power-sensor@40 {
@@ -435,11 +433,9 @@
 				reg = <0x50>;
 			};
 
-			pwm@5e{
-				compatible = "max31790";
+			pwm@5e {
+				compatible = "maxim,max31790";
 				reg = <0x5e>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 			};
 
 			power-sensor@40 {
@@ -558,11 +554,9 @@
 				reg = <0x50>;
 			};
 
-			pwm@5e{
-				compatible = "max31790";
+			pwm@5e {
+				compatible = "maxim,max31790";
 				reg = <0x5e>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 			};
 
 			power-sensor@40 {
@@ -681,11 +675,9 @@
 				reg = <0x50>;
 			};
 
-			pwm@5e{
-				compatible = "max31790";
+			pwm@5e {
+				compatible = "maxim,max31790";
 				reg = <0x5e>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 			};
 
 			power-sensor@40 {
@@ -804,11 +796,9 @@
 				reg = <0x50>;
 			};
 
-			pwm@5e{
-				compatible = "max31790";
+			pwm@5e {
+				compatible = "maxim,max31790";
 				reg = <0x5e>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 			};
 
 			power-sensor@40 {
@@ -926,11 +916,9 @@
 				reg = <0x50>;
 			};
 
-			pwm@5e{
-				compatible = "max31790";
+			pwm@5e {
+				compatible = "maxim,max31790";
 				reg = <0x5e>;
-				#address-cells = <1>;
-				#size-cells = <0>;
 			};
 
 			power-sensor@40 {
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts
index ee93a971c500..72c84f31bdf6 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-santabarbara.dts
@@ -233,7 +233,7 @@
 			"FM_NIC_PPS_IN_S0_R","FM_NIC_PPS_IN_S1_R";
 	};
 
-	fan-controller@21{
+	fan-controller@21 {
 		compatible = "maxim,max31790";
 		reg = <0x21>;
 	};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-tiogapass.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-tiogapass.dts
index 704ee684e0fb..5d4c7d979f1e 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-tiogapass.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-tiogapass.dts
@@ -508,7 +508,7 @@
 	status = "okay";
 	//HSC, AirMax Conn A
 	adm1278@45 {
-		compatible = "adm1275";
+		compatible = "adi,adm1275";
 		reg = <0x45>;
 		shunt-resistor-micro-ohms = <250>;
 	};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dts
new file mode 100644
index 000000000000..1d46eaee8656
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400-data64.dts
@@ -0,0 +1,375 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2019 Facebook Inc.
+/dts-v1/;
+
+#include <dt-bindings/gpio/aspeed-gpio.h>
+#include "ast2500-facebook-netbmc-common.dtsi"
+
+/ {
+	model = "Facebook Wedge 400 BMC (64MB Datastore)";
+	compatible = "facebook,wedge400-data64-bmc", "aspeed,ast2500";
+
+	aliases {
+		/*
+		 * PCA9548 (2-0070) provides 8 channels connecting to
+		 * SCM (System Controller Module).
+		 */
+		i2c16 = &imux16;
+		i2c17 = &imux17;
+		i2c18 = &imux18;
+		i2c19 = &imux19;
+		i2c20 = &imux20;
+		i2c21 = &imux21;
+		i2c22 = &imux22;
+		i2c23 = &imux23;
+
+		/*
+		 * PCA9548 (8-0070) provides 8 channels connecting to
+		 * SMB (Switch Main Board).
+		 */
+		i2c24 = &imux24;
+		i2c25 = &imux25;
+		i2c26 = &imux26;
+		i2c27 = &imux27;
+		i2c28 = &imux28;
+		i2c29 = &imux29;
+		i2c30 = &imux30;
+		i2c31 = &imux31;
+
+		/*
+		 * PCA9548 (11-0076) provides 8 channels connecting to
+		 * FCM (Fan Controller Module).
+		 */
+		i2c32 = &imux32;
+		i2c33 = &imux33;
+		i2c34 = &imux34;
+		i2c35 = &imux35;
+		i2c36 = &imux36;
+		i2c37 = &imux37;
+		i2c38 = &imux38;
+		i2c39 = &imux39;
+
+		spi2 = &spi_gpio;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	ast-adc-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
+			      <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>;
+	};
+
+	/*
+	 * GPIO-based SPI Master is required to access SPI TPM, because
+	 * full-duplex SPI transactions are not supported by ASPEED SPI
+	 * Controllers.
+	 */
+	spi_gpio: spi {
+		status = "okay";
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cs-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_LOW>;
+		sck-gpios = <&gpio ASPEED_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_HIGH>;
+		num-chipselects = <1>;
+
+		tpm@0 {
+			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+			spi-max-frequency = <33000000>;
+			reg = <0>;
+		};
+	};
+};
+
+/*
+ * Both firmware flashes are 128MB on Wedge400 BMC.
+ */
+&fmc_flash0 {
+#include "facebook-bmc-flash-layout-128-data64.dtsi"
+};
+
+&fmc_flash1 {
+	partitions {
+		compatible = "fixed-partitions";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		flash1@0 {
+			reg = <0x0 0x8000000>;
+			label = "flash1";
+		};
+	};
+};
+
+&uart2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd2_default
+		     &pinctrl_rxd2_default>;
+};
+
+&uart4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_txd4_default
+		     &pinctrl_rxd4_default>;
+};
+
+/*
+ * I2C bus #0 is multi-master environment dedicated for BMC and Bridge IC
+ * communication.
+ */
+&i2c0 {
+	status = "okay";
+	multi-master;
+	bus-frequency = <1000000>;
+};
+
+&i2c1 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux16: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux17: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux18: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux19: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux20: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux21: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux22: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux23: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+	};
+};
+
+&i2c3 {
+	status = "okay";
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&i2c5 {
+	status = "okay";
+};
+
+&i2c6 {
+	status = "okay";
+};
+
+&i2c7 {
+	status = "okay";
+};
+
+&i2c8 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		i2c-mux-idle-disconnect;
+
+		imux24: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux25: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux26: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux27: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux28: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux29: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux30: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux31: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
+	};
+};
+
+&i2c9 {
+	status = "okay";
+};
+
+&i2c10 {
+	status = "okay";
+};
+
+&i2c11 {
+	status = "okay";
+
+	i2c-mux@76 {
+		compatible = "nxp,pca9548";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x76>;
+		i2c-mux-idle-disconnect;
+
+		imux32: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+		};
+
+		imux33: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+		};
+
+		imux34: i2c@2 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <2>;
+		};
+
+		imux35: i2c@3 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <3>;
+		};
+
+		imux36: i2c@4 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <4>;
+		};
+
+		imux37: i2c@5 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <5>;
+		};
+
+		imux38: i2c@6 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <6>;
+		};
+
+		imux39: i2c@7 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <7>;
+		};
+
+	};
+};
+
+&i2c12 {
+	status = "okay";
+};
+
+&i2c13 {
+	status = "okay";
+};
+
+&adc {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&uhci {
+	status = "okay";
+};
+
+&sdhci1 {
+	max-frequency = <25000000>;
+	/*
+	 * DMA mode needs to be disabled to avoid conflicts with UHCI
+	 * Controller in AST2500 SoC.
+	 */
+	sdhci-caps-mask = <0x0 0x580000>;
+};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
index 5a8169bbda87..ef0cfc51cda4 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-wedge400.dts
@@ -1,376 +1,14 @@
 // SPDX-License-Identifier: GPL-2.0+
 // Copyright (c) 2019 Facebook Inc.
-/dts-v1/;
 
-#include <dt-bindings/gpio/aspeed-gpio.h>
-#include "ast2500-facebook-netbmc-common.dtsi"
+#include "aspeed-bmc-facebook-wedge400-data64.dts"
 
 / {
 	model = "Facebook Wedge 400 BMC";
 	compatible = "facebook,wedge400-bmc", "aspeed,ast2500";
-
-	aliases {
-		/*
-		 * PCA9548 (2-0070) provides 8 channels connecting to
-		 * SCM (System Controller Module).
-		 */
-		i2c16 = &imux16;
-		i2c17 = &imux17;
-		i2c18 = &imux18;
-		i2c19 = &imux19;
-		i2c20 = &imux20;
-		i2c21 = &imux21;
-		i2c22 = &imux22;
-		i2c23 = &imux23;
-
-		/*
-		 * PCA9548 (8-0070) provides 8 channels connecting to
-		 * SMB (Switch Main Board).
-		 */
-		i2c24 = &imux24;
-		i2c25 = &imux25;
-		i2c26 = &imux26;
-		i2c27 = &imux27;
-		i2c28 = &imux28;
-		i2c29 = &imux29;
-		i2c30 = &imux30;
-		i2c31 = &imux31;
-
-		/*
-		 * PCA9548 (11-0076) provides 8 channels connecting to
-		 * FCM (Fan Controller Module).
-		 */
-		i2c32 = &imux32;
-		i2c33 = &imux33;
-		i2c34 = &imux34;
-		i2c35 = &imux35;
-		i2c36 = &imux36;
-		i2c37 = &imux37;
-		i2c38 = &imux38;
-		i2c39 = &imux39;
-
-		spi2 = &spi_gpio;
-	};
-
-	chosen {
-		stdout-path = &uart1;
-		bootargs = "console=ttyS0,9600n8 root=/dev/ram rw";
-	};
-
-	ast-adc-hwmon {
-		compatible = "iio-hwmon";
-		io-channels = <&adc 0>, <&adc 1>, <&adc 2>, <&adc 3>, <&adc 4>,
-			      <&adc 5>, <&adc 6>, <&adc 7>, <&adc 8>;
-	};
-
-	/*
-	 * GPIO-based SPI Master is required to access SPI TPM, because
-	 * full-duplex SPI transactions are not supported by ASPEED SPI
-	 * Controllers.
-	 */
-	spi_gpio: spi {
-		status = "okay";
-		compatible = "spi-gpio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cs-gpios = <&gpio ASPEED_GPIO(R, 2) GPIO_ACTIVE_LOW>;
-		gpio-sck = <&gpio ASPEED_GPIO(R, 3) GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio ASPEED_GPIO(R, 4) GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio ASPEED_GPIO(R, 5) GPIO_ACTIVE_HIGH>;
-		num-chipselects = <1>;
-
-		tpm@0 {
-			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
-			spi-max-frequency = <33000000>;
-			reg = <0>;
-		};
-	};
 };
 
-/*
- * Both firmware flashes are 128MB on Wedge400 BMC.
- */
 &fmc_flash0 {
+	/delete-node/partitions;
 #include "facebook-bmc-flash-layout-128.dtsi"
 };
-
-&fmc_flash1 {
-	partitions {
-		compatible = "fixed-partitions";
-		#address-cells = <1>;
-		#size-cells = <1>;
-
-		flash1@0 {
-			reg = <0x0 0x8000000>;
-			label = "flash1";
-		};
-	};
-};
-
-&uart2 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd2_default
-		     &pinctrl_rxd2_default>;
-};
-
-&uart4 {
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_txd4_default
-		     &pinctrl_rxd4_default>;
-};
-
-/*
- * I2C bus #0 is multi-master environment dedicated for BMC and Bridge IC
- * communication.
- */
-&i2c0 {
-	status = "okay";
-	multi-master;
-	bus-frequency = <1000000>;
-};
-
-&i2c1 {
-	status = "okay";
-};
-
-&i2c2 {
-	status = "okay";
-
-	i2c-mux@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		imux16: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux17: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux18: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux19: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux20: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux21: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux22: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux23: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-	};
-};
-
-&i2c3 {
-	status = "okay";
-};
-
-&i2c4 {
-	status = "okay";
-};
-
-&i2c5 {
-	status = "okay";
-};
-
-&i2c6 {
-	status = "okay";
-};
-
-&i2c7 {
-	status = "okay";
-};
-
-&i2c8 {
-	status = "okay";
-
-	i2c-mux@70 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x70>;
-		i2c-mux-idle-disconnect;
-
-		imux24: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux25: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux26: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux27: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux28: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux29: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux30: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux31: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-
-	};
-};
-
-&i2c9 {
-	status = "okay";
-};
-
-&i2c10 {
-	status = "okay";
-};
-
-&i2c11 {
-	status = "okay";
-
-	i2c-mux@76 {
-		compatible = "nxp,pca9548";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		reg = <0x76>;
-		i2c-mux-idle-disconnect;
-
-		imux32: i2c@0 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <0>;
-		};
-
-		imux33: i2c@1 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <1>;
-		};
-
-		imux34: i2c@2 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <2>;
-		};
-
-		imux35: i2c@3 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <3>;
-		};
-
-		imux36: i2c@4 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <4>;
-		};
-
-		imux37: i2c@5 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <5>;
-		};
-
-		imux38: i2c@6 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <6>;
-		};
-
-		imux39: i2c@7 {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			reg = <7>;
-		};
-
-	};
-};
-
-&i2c12 {
-	status = "okay";
-};
-
-&i2c13 {
-	status = "okay";
-};
-
-&adc {
-	status = "okay";
-};
-
-&ehci1 {
-	status = "okay";
-};
-
-&uhci {
-	status = "okay";
-};
-
-&sdhci1 {
-	max-frequency = <25000000>;
-	/*
-	 * DMA mode needs to be disabled to avoid conflicts with UHCI
-	 * Controller in AST2500 SoC.
-	 */
-	sdhci-caps-mask = <0x0 0x580000>;
-};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
index aae789854c52..60b98d602e80 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-facebook-yosemite4.dts
@@ -1186,19 +1186,19 @@
 				ti,mode = /bits/ 8 <1>;
 			};
 
-			pwm@20{
+			pwm@20 {
 				compatible = "maxim,max31790";
 				reg = <0x20>;
 			};
 
-			gpio@22{
+			gpio@22 {
 				compatible = "ti,tca6424";
 				reg = <0x22>;
 				gpio-controller;
 				#gpio-cells = <2>;
 			};
 
-			pwm@2f{
+			pwm@2f {
 				compatible = "maxim,max31790";
 				reg = <0x2f>;
 			};
@@ -1234,19 +1234,19 @@
 				ti,mode = /bits/ 8 <1>;
 			};
 
-			pwm@20{
+			pwm@20 {
 				compatible = "maxim,max31790";
 				reg = <0x20>;
 			};
 
-			gpio@22{
+			gpio@22 {
 				compatible = "ti,tca6424";
 				reg = <0x22>;
 				gpio-controller;
 				#gpio-cells = <2>;
 			};
 
-			pwm@2f{
+			pwm@2f {
 				compatible = "maxim,max31790";
 				reg = <0x2f>;
 			};
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
index 4d9e2cd11f44..9f144f527f03 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-everest.dts
@@ -2808,6 +2808,7 @@
 			#size-cells = <0>;
 
 			cfam4_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -2824,6 +2825,7 @@
 			};
 
 			cfam4_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -2840,8 +2842,8 @@
 			};
 
 			cfam4_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x40>;
-				compatible = "ibm,fsi2spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -2857,8 +2859,8 @@
 			};
 
 			cfam4_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x60>;
-				compatible = "ibm,fsi2spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -3181,6 +3183,7 @@
 			#size-cells = <0>;
 
 			cfam5_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -3197,6 +3200,7 @@
 			};
 
 			cfam5_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -3213,8 +3217,8 @@
 			};
 
 			cfam5_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x40>;
-				compatible = "ibm,fsi2spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -3230,8 +3234,8 @@
 			};
 
 			cfam5_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x60>;
-				compatible = "ibm,fsi2spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -3554,6 +3558,7 @@
 			#size-cells = <0>;
 
 			cfam6_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -3570,6 +3575,7 @@
 			};
 
 			cfam6_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -3586,8 +3592,8 @@
 			};
 
 			cfam6_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x40>;
-				compatible = "ibm,fsi2spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -3603,8 +3609,8 @@
 			};
 
 			cfam6_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x60>;
-				compatible = "ibm,fsi2spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -3927,6 +3933,7 @@
 			#size-cells = <0>;
 
 			cfam7_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -3943,6 +3950,7 @@
 			};
 
 			cfam7_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -3959,8 +3967,8 @@
 			};
 
 			cfam7_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x40>;
-				compatible = "ibm,fsi2spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -3976,8 +3984,8 @@
 			};
 
 			cfam7_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x60>;
-				compatible = "ibm,fsi2spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts
index 757421bc3605..c5fb5d410001 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-rainier.dts
@@ -263,7 +263,7 @@
 		reg = <0x51>;
 	};
 
-	tca_pres1: tca9554@20{
+	tca_pres1: tca9554@20 {
 		compatible = "ti,tca9554";
 		reg = <0x20>;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts
index 8d98be3d5f2e..dbadba8eb698 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-ibm-sbp1.dts
@@ -3778,10 +3778,10 @@
 			pinctrl-0 = <&U65200_pins>;
 			pinctrl-names = "default";
 			U65200_pins: cfg-pins {
-				pins =  "gp60", "gp61", "gp62",
-				"gp63", "gp64", "gp65", "gp66",
-				"gp67", "gp70", "gp71", "gp72",
-				"gp73", "gp74", "gp75", "gp76", "gp77";
+				pins = "gp60", "gp61", "gp62", "gp63", "gp64",
+				       "gp65", "gp66", "gp67", "gp70", "gp71",
+				       "gp72", "gp73", "gp74", "gp75", "gp76",
+				       "gp77";
 				function = "gpio";
 				input-enable;
 				bias-pull-up;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts
index 78a5656ef75d..79c6919b3570 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-inspur-fp5280g2.dts
@@ -54,10 +54,9 @@
 	};
 
 	fsi: gpio-fsi {
-		compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
+		compatible = "aspeed,ast2500-cf-fsi-master";
 		#address-cells = <2>;
 		#size-cells = <0>;
-		no-gpio-delays;
 
 		memory-region = <&coldfire_memory>;
 		aspeed,sram = <&sram>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts
index de61eac54585..fdcf4492fb4e 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-lenovo-hr855xg2.dts
@@ -151,7 +151,7 @@
 	pinctrl-0 = <&pinctrl_rgmii2_default &pinctrl_mdio2_default>;
 };
 
-&adc{
+&adc {
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_adc0_default
@@ -211,7 +211,7 @@
 	status = "okay";
 	bus-frequency = <90000>;
 	HotSwap@10 {
-		compatible = "adm1272";
+		compatible = "adi,adm1272";
 		reg = <0x10>;
 	};
 
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts
index 41e3e9dd85f5..4de38613b0ea 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-nvidia-gb200nvl-bmc.dts
@@ -126,6 +126,17 @@
 			gpio = <&sgpiom0 154 GPIO_ACTIVE_LOW>;
 		};
 	};
+
+	standby_power_regulator: standby-power-regulator {
+		status = "okay";
+		compatible = "regulator-fixed";
+		regulator-name = "standby_power";
+		gpio = <&gpio0 ASPEED_GPIO(M, 3) GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		enable-active-high;
+		regulator-always-on;
+	};
 };
 
 // Enable Primary flash on FMC for bring up activity
@@ -216,6 +227,30 @@
 	status = "okay";
 };
 
+&mdio0 {
+	status = "okay";
+	ethphy0: ethernet-phy@0 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0>;
+	};
+};
+
+&mdio3 {
+	status = "okay";
+	ethphy3: ethernet-phy@2 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <2>;
+	};
+};
+
+&mac0 {
+	status = "okay";
+	pinctrl-names = "default";
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy3>;
+	pinctrl-0 = <&pinctrl_rgmii1_default>;
+};
+
 &mac2 {
 	status = "okay";
 	phy-mode = "rmii";
@@ -247,7 +282,7 @@
 };
 
 &sgpiom0 {
-	status="okay";
+	status = "okay";
 	ngpios = <128>;
 	gpio-line-names =
 		"","",
@@ -411,7 +446,7 @@
 
 // I2C4
 &i2c3 {
-	status = "disabled";
+	status = "okay";
 };
 
 // I2C5
@@ -431,6 +466,7 @@
 		#interrupt-cells = <2>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&standby_power_regulator>;
 		gpio-line-names =
 			"RTC_MUX_SEL-O",
 			"PCI_MUX_SEL-O",
@@ -464,6 +500,7 @@
 		#size-cells = <0>;
 		reg = <0x71>;
 		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
 
 		imux16: i2c@0 {
 			#address-cells = <1>;
@@ -528,6 +565,7 @@
 		#size-cells = <0>;
 		reg = <0x72>;
 		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
 
 		imux20: i2c@0 {
 			#address-cells = <1>;
@@ -545,6 +583,7 @@
 				reg = <0x21>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				vcc-supply = <&standby_power_regulator>;
 				gpio-line-names =
 					"RST_CX_0_L-O",
 					"RST_CX_1_L-O",
@@ -584,6 +623,7 @@
 		#size-cells = <0>;
 		reg = <0x73>;
 		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
 
 		imux24: i2c@0 {
 			#address-cells = <1>;
@@ -602,6 +642,7 @@
 				#size-cells = <0>;
 				reg = <0x70>;
 				i2c-mux-idle-disconnect;
+				vdd-supply = <&standby_power_regulator>;
 
 				i2c25mux0: i2c@0 {
 					#address-cells = <1>;
@@ -648,6 +689,7 @@
 		#size-cells = <0>;
 		reg = <0x75>;
 		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
 
 		imux28: i2c@0 {
 			#address-cells = <1>;
@@ -712,6 +754,7 @@
 		#size-cells = <0>;
 		reg = <0x76>;
 		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
 
 		imux32: i2c@0 {
 			#address-cells = <1>;
@@ -729,6 +772,7 @@
 				reg = <0x21>;
 				gpio-controller;
 				#gpio-cells = <2>;
+				vcc-supply = <&standby_power_regulator>;
 				gpio-line-names =
 					"SEC_RST_CX_0_L-O",
 					"SEC_RST_CX_1_L-O",
@@ -768,6 +812,7 @@
 		#size-cells = <0>;
 		reg = <0x77>;
 		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
 
 		imux36: i2c@0 {
 			#address-cells = <1>;
@@ -862,6 +907,7 @@
 		#interrupt-cells = <2>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&standby_power_regulator>;
 		gpio-line-names =
 			"FPGA_THERM_OVERT_L-I",
 			"FPGA_READY_BMC-I",
@@ -891,6 +937,7 @@
 		#interrupt-cells = <2>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&standby_power_regulator>;
 		gpio-line-names =
 			"SEC_FPGA_THERM_OVERT_L-I",
 			"SEC_FPGA_READY_BMC-I",
@@ -949,6 +996,7 @@
 		#interrupt-cells = <2>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <ASPEED_GPIO(B, 6) IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&standby_power_regulator>;
 		gpio-line-names =
 			"IOB_PRSNT_L",
 			"IOB_DP_HPD",
@@ -1014,6 +1062,7 @@
 		#size-cells = <0>;
 		reg = <0x77>;
 		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
 
 		e1si2c0: i2c@0 {
 			#address-cells = <1>;
@@ -1054,6 +1103,7 @@
 		#size-cells = <0>;
 		reg = <0x77>;
 		i2c-mux-idle-disconnect;
+		vdd-supply = <&standby_power_regulator>;
 
 		e1si2c4: i2c@0 {
 			#address-cells = <1>;
@@ -1100,7 +1150,7 @@
 		/*J0-J7*/ "", "", "", "", "", "", "", "",
 		/*K0-K7*/ "", "", "", "", "", "", "", "",
 		/*L0-L7*/ "", "", "", "", "", "", "", "",
-		/*M0-M7*/ "PCIE_EP_RST_EN-O", "BMC_FRU_WP-O", "HMC_RESET_L-O", "STBY_POWER_EN-O",
+		/*M0-M7*/ "PCIE_EP_RST_EN-O", "BMC_FRU_WP-O", "FPGA_RST_L-O", "STBY_POWER_EN-O",
 					"STBY_POWER_PG-I", "PCIE_EP_RST_L-O", "", "",
 		/*N0-N7*/ "", "", "", "", "", "", "", "",
 		/*O0-O7*/ "", "", "", "", "", "", "", "",
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts
index 65b2208f5a90..9f2ad551255d 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts
@@ -63,7 +63,7 @@
 	};
 
 	fsi: gpio-fsi {
-		compatible = "fsi-master-gpio", "fsi-master";
+		compatible = "fsi-master-gpio";
 		#address-cells = <2>;
 		#size-cells = <0>;
 
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-mowgli.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-mowgli.dts
index 31ff19ef87a0..6c8b966ffccc 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-mowgli.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-mowgli.dts
@@ -165,7 +165,7 @@
 	};
 
 	fsi: gpio-fsi {
-		compatible = "fsi-master-gpio", "fsi-master";
+		compatible = "fsi-master-gpio";
 		#address-cells = <2>;
 		#size-cells = <0>;
 		no-gpio-delays;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts
index 1a7c61750d0d..ce6d30ddf07c 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-nicole.dts
@@ -77,10 +77,9 @@
 	};
 
 	fsi: gpio-fsi {
-		compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
+		compatible = "aspeed,ast2500-cf-fsi-master";
 		#address-cells = <2>;
 		#size-cells = <0>;
-		no-gpio-delays;
 
 		memory-region = <&coldfire_memory>;
 		aspeed,sram = <&sram>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dts
index 123da82c04d5..7953059a6c67 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-palmetto.dts
@@ -55,7 +55,7 @@
 	};
 
 	fsi: gpio-fsi {
-		compatible = "aspeed,ast2400-cf-fsi-master", "fsi-master";
+		compatible = "aspeed,ast2400-cf-fsi-master";
 		#address-cells = <2>;
 		#size-cells = <0>;
 
@@ -151,7 +151,7 @@
 	};
 
 	rtc@68 {
-		compatible = "dallas,ds3231";
+		compatible = "maxim,ds3231";
 		reg = <0x68>;
 	};
 };
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts
index e6b383f6e977..a0263d969e51 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-romulus.dts
@@ -68,10 +68,9 @@
 	};
 
 	fsi: gpio-fsi {
-		compatible = "aspeed,ast2500-cf-fsi-master", "fsi-master";
+		compatible = "aspeed,ast2500-cf-fsi-master";
 		#address-cells = <2>;
 		#size-cells = <0>;
-		no-gpio-delays;
 
 		memory-region = <&coldfire_memory>;
 		aspeed,sram = <&sram>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts
index 8b1e82c8cdfe..89907b628b65 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-witherspoon.dts
@@ -173,7 +173,7 @@
 	};
 
 	fsi: gpio-fsi {
-		compatible = "fsi-master-gpio", "fsi-master";
+		compatible = "fsi-master-gpio";
 		#address-cells = <2>;
 		#size-cells = <0>;
 		no-gpio-delays;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts
index 6ac7b0aa6e54..af3a9d39d277 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-zaius.dts
@@ -64,7 +64,7 @@
 			linux,code = <ASPEED_GPIO(F, 7)>;
 		};
 
-		event-pcie-e2b-present{
+		event-pcie-e2b-present {
 			label = "pcie-e2b-present";
 			gpios = <&gpio ASPEED_GPIO(E, 7) GPIO_ACTIVE_LOW>;
 			linux,code = <ASPEED_GPIO(E, 7)>;
@@ -96,7 +96,7 @@
 	};
 
 	fsi: gpio-fsi {
-		compatible = "fsi-master-gpio", "fsi-master";
+		compatible = "fsi-master-gpio";
 		#address-cells = <2>;
 		#size-cells = <0>;
 		no-gpio-delays;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts
index fd361cf073c2..86451227847b 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-quanta-s6q.dts
@@ -509,7 +509,7 @@
 			reg = <1>;
 
 			cpu0_pvccin@60 {
-				compatible = "isil,raa229004";
+				compatible = "renesas,raa229004";
 				reg = <0x60>;
 			};
 
@@ -530,7 +530,7 @@
 			reg = <2>;
 
 			cpu1_pvccin@72 {
-				compatible = "isil,raa229004";
+				compatible = "renesas,raa229004";
 				reg = <0x72>;
 			};
 
diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman.dtsi b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman.dtsi
index 16815eede710..8c953e3a1d41 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-vegman.dtsi
@@ -30,7 +30,7 @@
 			reusable;
 		};
 
-		ramoops@9eff0000{
+		ramoops@9eff0000 {
 			compatible = "ramoops";
 			reg = <0x9eff0000 0x10000>;
 			record-size = <0x2000>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
index 78c967812492..c3d4d916c69b 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g4.dtsi
@@ -356,7 +356,6 @@
 			lpc: lpc@1e789000 {
 				compatible = "aspeed,ast2400-lpc-v2", "simple-mfd", "syscon";
 				reg = <0x1e789000 0x1000>;
-				reg-io-width = <4>;
 
 				#address-cells = <1>;
 				#size-cells = <1>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
index 57a699a7c149..39500bdb4747 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g5.dtsi
@@ -273,7 +273,6 @@
 			gfx: display@1e6e6000 {
 				compatible = "aspeed,ast2500-gfx", "syscon";
 				reg = <0x1e6e6000 0x1000>;
-				reg-io-width = <4>;
 				clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
 				resets = <&syscon ASPEED_RESET_CRT1>;
 				syscon = <&syscon>;
@@ -441,7 +440,6 @@
 			lpc: lpc@1e789000 {
 				compatible = "aspeed,ast2500-lpc-v2", "simple-mfd", "syscon";
 				reg = <0x1e789000 0x1000>;
-				reg-io-width = <4>;
 
 				#address-cells = <1>;
 				#size-cells = <1>;
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6-pinctrl.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6-pinctrl.dtsi
index 289668f051eb..e87c4b58994a 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g6-pinctrl.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6-pinctrl.dtsi
@@ -412,6 +412,16 @@
 		groups = "MDIO4";
 	};
 
+	pinctrl_ncsi3_default: ncsi3_default {
+		function = "RMII3";
+		groups = "NCSI3";
+	};
+
+	pinctrl_ncsi4_default: ncsi4_default {
+		function = "RMII4";
+		groups = "NCSI4";
+	};
+
 	pinctrl_ncts1_default: ncts1_default {
 		function = "NCTS1";
 		groups = "NCTS1";
diff --git a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
index 8ed715bd53aa..f8662c8ac089 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
+++ b/arch/arm/boot/dts/aspeed/aspeed-g6.dtsi
@@ -382,7 +382,6 @@
 			gfx: display@1e6e6000 {
 				compatible = "aspeed,ast2600-gfx", "syscon";
 				reg = <0x1e6e6000 0x1000>;
-				reg-io-width = <4>;
 				clocks = <&syscon ASPEED_CLK_GATE_D1CLK>;
 				resets = <&syscon ASPEED_RESET_GRAPHICS>;
 				syscon = <&syscon>;
@@ -572,7 +571,6 @@
 			lpc: lpc@1e789000 {
 				compatible = "aspeed,ast2600-lpc-v2", "simple-mfd", "syscon";
 				reg = <0x1e789000 0x1000>;
-				reg-io-width = <4>;
 
 				#address-cells = <1>;
 				#size-cells = <1>;
@@ -662,7 +660,7 @@
 				status = "disabled";
 
 				sdhci0: sdhci@1e740100 {
-					compatible = "aspeed,ast2600-sdhci", "sdhci";
+					compatible = "aspeed,ast2600-sdhci";
 					reg = <0x100 0x100>;
 					interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 					sdhci,auto-cmd12;
@@ -671,7 +669,7 @@
 				};
 
 				sdhci1: sdhci@1e740200 {
-					compatible = "aspeed,ast2600-sdhci", "sdhci";
+					compatible = "aspeed,ast2600-sdhci";
 					reg = <0x200 0x100>;
 					interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 					sdhci,auto-cmd12;
@@ -847,7 +845,7 @@
 
 			fsim0: fsi@1e79b000 {
 				#interrupt-cells = <1>;
-				compatible = "aspeed,ast2600-fsi-master", "fsi-master";
+				compatible = "aspeed,ast2600-fsi-master";
 				reg = <0x1e79b000 0x94>;
 				interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
@@ -859,7 +857,7 @@
 
 			fsim1: fsi@1e79b100 {
 				#interrupt-cells = <1>;
-				compatible = "aspeed,ast2600-fsi-master", "fsi-master";
+				compatible = "aspeed,ast2600-fsi-master";
 				reg = <0x1e79b100 0x94>;
 				interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
 				pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi b/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
index 00e5887c926f..0ef225acddfc 100644
--- a/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
+++ b/arch/arm/boot/dts/aspeed/ast2600-facebook-netbmc-common.dtsi
@@ -31,9 +31,13 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		gpio-sck = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
-		gpio-mosi = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
-		gpio-miso = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
+		/*
+		 * chipselect pins are defined in platform .dts files
+		 * separately.
+		 */
+		sck-gpios = <&gpio0 ASPEED_GPIO(X, 3) GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 ASPEED_GPIO(X, 4) GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 ASPEED_GPIO(X, 5) GPIO_ACTIVE_HIGH>;
 
 		tpm@0 {
 			compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
@@ -152,18 +156,6 @@
 	status = "okay";
 };
 
-&emmc_controller {
-	status = "okay";
-};
-
-&emmc {
-	status = "okay";
-
-	non-removable;
-	max-frequency = <25000000>;
-	bus-width = <4>;
-};
-
 &rtc {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128-data64.dtsi b/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128-data64.dtsi
new file mode 100644
index 000000000000..efd92232cda2
--- /dev/null
+++ b/arch/arm/boot/dts/aspeed/facebook-bmc-flash-layout-128-data64.dtsi
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0+
+// Copyright (c) 2020 Facebook Inc.
+
+partitions {
+	compatible = "fixed-partitions";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	/*
+	 * u-boot partition: 896KB.
+	 */
+	u-boot@0 {
+		reg = <0x0 0xe0000>;
+		label = "u-boot";
+	};
+
+	/*
+	 * u-boot environment variables: 64KB.
+	 */
+	u-boot-env@e0000 {
+		reg = <0xe0000 0x10000>;
+		label = "env";
+	};
+
+	/*
+	 * image metadata partition (64KB), used by Facebook internal
+	 * tools.
+	 */
+	image-meta@f0000 {
+		reg = <0xf0000 0x10000>;
+		label = "meta";
+	};
+
+	/*
+	 * FIT image: 63 MB.
+	 */
+	fit@100000 {
+		reg = <0x100000 0x3f00000>;
+		label = "fit";
+	};
+
+	/*
+	 * "data0" partition (64MB) is used by Facebook BMC platforms as
+	 * persistent data store.
+	 */
+	data0@4000000 {
+		reg = <0x4000000 0x4000000>;
+		label = "data0";
+	};
+
+	/*
+	 * Although the master partition can be created by enabling
+	 * MTD_PARTITIONED_MASTER option, below "flash0" partition is
+	 * explicitly created to avoid breaking legacy applications.
+	 */
+	flash0@0 {
+		reg = <0x0 0x8000000>;
+		label = "flash0";
+	};
+};
diff --git a/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi b/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi
index 07ce3b2bc62a..06fac236773f 100644
--- a/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi
+++ b/arch/arm/boot/dts/aspeed/ibm-power10-dual.dtsi
@@ -82,6 +82,7 @@
 			#size-cells = <0>;
 
 			cfam0_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -98,6 +99,7 @@
 			};
 
 			cfam0_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -114,8 +116,8 @@
 			};
 
 			cfam0_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x40>;
-				compatible =  "ibm,fsi2spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -131,8 +133,8 @@
 			};
 
 			cfam0_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x60>;
-				compatible =  "ibm,fsi2spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -249,6 +251,7 @@
 			#size-cells = <0>;
 
 			cfam1_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -265,6 +268,7 @@
 			};
 
 			cfam1_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -281,8 +285,8 @@
 			};
 
 			cfam1_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x40>;
-				compatible =  "ibm,fsi2spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -298,8 +302,8 @@
 			};
 
 			cfam1_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x60>;
-				compatible =  "ibm,fsi2spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 
diff --git a/arch/arm/boot/dts/aspeed/ibm-power10-quad.dtsi b/arch/arm/boot/dts/aspeed/ibm-power10-quad.dtsi
index 57494c744b5d..9501f66d0030 100644
--- a/arch/arm/boot/dts/aspeed/ibm-power10-quad.dtsi
+++ b/arch/arm/boot/dts/aspeed/ibm-power10-quad.dtsi
@@ -733,6 +733,7 @@
 			#size-cells = <0>;
 
 			cfam2_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -749,6 +750,7 @@
 			};
 
 			cfam2_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -765,8 +767,8 @@
 			};
 
 			cfam2_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x40>;
-				compatible =  "ibm,fsi2spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -782,8 +784,8 @@
 			};
 
 			cfam2_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x60>;
-				compatible =  "ibm,fsi2spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -1106,6 +1108,7 @@
 			#size-cells = <0>;
 
 			cfam3_spi0: spi@0 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1122,6 +1125,7 @@
 			};
 
 			cfam3_spi1: spi@20 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x20>;
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1138,8 +1142,8 @@
 			};
 
 			cfam3_spi2: spi@40 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x40>;
-				compatible =  "ibm,fsi2spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 
@@ -1155,8 +1159,8 @@
 			};
 
 			cfam3_spi3: spi@60 {
+				compatible = "ibm,spi-fsi";
 				reg = <0x60>;
-				compatible =  "ibm,fsi2spi";
 				#address-cells = <1>;
 				#size-cells = <0>;
 
diff --git a/arch/arm/boot/dts/broadcom/Makefile b/arch/arm/boot/dts/broadcom/Makefile
index 71062ff9adbe..2552e11b5e31 100644
--- a/arch/arm/boot/dts/broadcom/Makefile
+++ b/arch/arm/boot/dts/broadcom/Makefile
@@ -51,6 +51,7 @@ dtb-$(CONFIG_ARCH_BCMBCA) += \
 dtb-$(CONFIG_ARCH_BCM_5301X) += \
 	bcm4708-asus-rt-ac56u.dtb \
 	bcm4708-asus-rt-ac68u.dtb \
+	bcm4708-buffalo-wxr-1750dhp.dtb \
 	bcm4708-buffalo-wzr-1750dhp.dtb \
 	bcm4708-buffalo-wzr-1166dhp.dtb \
 	bcm4708-buffalo-wzr-1166dhp2.dtb \
diff --git a/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wxr-1750dhp.dts b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wxr-1750dhp.dts
new file mode 100644
index 000000000000..f5c95c9a712e
--- /dev/null
+++ b/arch/arm/boot/dts/broadcom/bcm4708-buffalo-wxr-1750dhp.dts
@@ -0,0 +1,138 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Author: Taishi Shimizu <s.taishi14142@gmail.com>
+ */
+
+/dts-v1/;
+
+#include "bcm4708.dtsi"
+#include "bcm5301x-nand-cs0-bch8.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "buffalo,wxr-1750dhp", "brcm,bcm4708";
+	model = "Buffalo WXR-1750DHP";
+
+	memory@0 {
+		reg = <0x00000000 0x08000000>,
+		      <0x88000000 0x08000000>;
+		device_type = "memory";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-aoss {
+			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
+			label = "AOSS";
+			linux,code = <KEY_WPS_BUTTON>;
+		};
+
+		/* GPIO 3 is a switch button with AUTO / MANUAL. */
+		button-manual {
+			gpios = <&chipcommon 3 GPIO_ACTIVE_HIGH>;
+			label = "MANUAL";
+			linux,code = <BTN_0>;
+			linux,input-type = <EV_SW>;
+		};
+
+		button-restart {
+			gpios = <&chipcommon 11 GPIO_ACTIVE_LOW>;
+			label = "Reset";
+			linux,code = <KEY_RESTART>;
+		};
+
+		/* GPIO 8 and 9 are a tri-state switch button with
+		 * ROUTER / AP / WB.
+		 */
+		button-router {
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			label = "ROUTER";
+			linux,code = <BTN_1>;
+			linux,input-type = <EV_SW>;
+		};
+
+		button-wb {
+			gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
+			label = "WB";
+			linux,code = <BTN_2>;
+			linux,input-type = <EV_SW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-internet {
+			color = <LED_COLOR_ID_WHITE>;
+			function = "internet";
+			gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-power0 {
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&chipcommon 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-power1 {
+			color = <LED_COLOR_ID_WHITE>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&chipcommon 5 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-router0 {
+			color = <LED_COLOR_ID_AMBER>;
+			function = "router";
+			gpios = <&chipcommon 14 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-router1 {
+			color = <LED_COLOR_ID_WHITE>;
+			function = "router";
+			gpios = <&chipcommon 15 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-usb {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_USB;
+			gpios = <&chipcommon 4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "usbport";
+			trigger-sources = <&xhci_port1 &ehci_port1 &ohci_port1>;
+		};
+	};
+};
+
+&srab {
+	status = "okay";
+
+	ports {
+		port@0 {
+			label = "wan";
+		};
+
+		port@1 {
+			label = "lan4";
+		};
+
+		port@2 {
+			label = "lan3";
+		};
+
+		port@3 {
+			label = "lan2";
+		};
+
+		port@4 {
+			label = "lan1";
+		};
+	};
+};
+
+&usb3 {
+	vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
+};
+
+&usb3_phy {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/cirrus/ep7211-edb7211.dts b/arch/arm/boot/dts/cirrus/ep7211-edb7211.dts
index adc74243ed19..0b15ccaa762e 100644
--- a/arch/arm/boot/dts/cirrus/ep7211-edb7211.dts
+++ b/arch/arm/boot/dts/cirrus/ep7211-edb7211.dts
@@ -46,8 +46,8 @@
 
 	i2c: i2c {
 		compatible = "i2c-gpio";
-		gpios = <&portd 4 GPIO_ACTIVE_HIGH>,
-			<&portd 5 GPIO_ACTIVE_HIGH>;
+		sda-gpios = <&portd 4 GPIO_ACTIVE_HIGH>;
+		scl-gpios = <&portd 5 GPIO_ACTIVE_HIGH>;
 		i2c-gpio,delay-us = <2>;
 		i2c-gpio,scl-output-only;
 		#address-cells = <1>;
diff --git a/arch/arm/boot/dts/intel/ixp/Makefile b/arch/arm/boot/dts/intel/ixp/Makefile
index ab8525f1ea1d..cb30d8d55016 100644
--- a/arch/arm/boot/dts/intel/ixp/Makefile
+++ b/arch/arm/boot/dts/intel/ixp/Makefile
@@ -1,5 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_IXP4XX) += \
+	intel-ixp42x-actiontec-mi424wr-ac.dtb \
+	intel-ixp42x-actiontec-mi424wr-d.dtb \
 	intel-ixp42x-linksys-nslu2.dtb \
 	intel-ixp42x-linksys-wrv54g.dtb \
 	intel-ixp42x-freecom-fsg-3.dtb \
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-ac.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-ac.dts
new file mode 100644
index 000000000000..413b9255f9e3
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-ac.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the IXP425-based Actiontec MI424WR revision A and C
+ * Based on a board file from OpenWrt by Jose Vasconcellos.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x-actiontec-mi424wr.dtsi"
+
+/ {
+	model = "Actiontec MI424WR rev A/C";
+	compatible = "actiontec,mi424wr-ac", "intel,ixp42x";
+
+	soc {
+		/* EthB used for WAN */
+		ethernet@c8009000 {
+			phy-handle = <&phy17>; // 17 on revision A-C
+
+			mdio {
+				phy17: ethernet-phy@17 {
+					/* WAN */
+					reg = <17>;
+				};
+			};
+		};
+
+		/* EthC used for LAN */
+		ethernet@c800a000 {
+			/* Fixed link to the CPU MII port on the KS8995 */
+			fixed-link {
+				speed = <100>;
+				full-duplex;
+			};
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-d.dts b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-d.dts
new file mode 100644
index 000000000000..3619c6411a5c
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr-d.dts
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the IXP425-based Actiontec MI424WR revision D
+ * Based on a board file from OpenWrt by Jose Vasconcellos.
+ */
+
+/dts-v1/;
+
+#include "intel-ixp42x-actiontec-mi424wr.dtsi"
+
+/ {
+	model = "Actiontec MI424WR rev D";
+	compatible = "actiontec,mi424wr-d", "intel,ixp42x";
+
+	soc {
+		/* EthB used for LAN */
+		ethernet@c8009000 {
+			/* Fixed link to the CPU MII port on the KS8995 */
+			fixed-link {
+				speed = <100>;
+				full-duplex;
+			};
+
+			mdio {
+				/* PHY ID 0x00221450 */
+				phy5: ethernet-phy@5 {
+					/* WAN */
+					reg = <5>;
+				};
+			};
+		};
+
+		/* EthC used for WAN */
+		ethernet@c800a000 {
+			phy-handle = <&phy5>; // 5 on revision D
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi
new file mode 100644
index 000000000000..76fd97c5beb6
--- /dev/null
+++ b/arch/arm/boot/dts/intel/ixp/intel-ixp42x-actiontec-mi424wr.dtsi
@@ -0,0 +1,272 @@
+// SPDX-License-Identifier: ISC
+/*
+ * Device Tree file for the IXP425-based Actiontec MI424WR
+ * Based on a board file from OpenWrt by Jose Vasconcellos.
+ */
+
+#include "intel-ixp42x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x02000000>;
+	};
+
+	chosen {
+		bootargs = "console=ttyS0,115200n8";
+		stdout-path = "uart1:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-wan-coax {
+			color = <LED_COLOR_ID_GREEN>;
+			function = "wan-coax";
+			gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-power-alarm {
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_ALARM;
+			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-power {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+		led-wireless {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_WLAN;
+			gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		led-internet-down {
+			color = <LED_COLOR_ID_RED>;
+			function = "internet-down";
+			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-internet-up {
+			color = <LED_COLOR_ID_GREEN>;
+			function = "internet-up";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-lan-coax {
+			color = <LED_COLOR_ID_GREEN>;
+			function = "lan-coax";
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		led-wan-ethernet-alarm {
+			color = <LED_COLOR_ID_RED>;
+			function = "wan-ethernet-alarm";
+			gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+		/* The last three LEDs are not mounted but traces exist on the PCB */
+		led-phone-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = "phone-1";
+			gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		led-phone-2 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = "phone-2";
+			gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+		led-voip {
+			color = <LED_COLOR_ID_GREEN>;
+			function = "voip";
+			gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+			default-state = "off";
+		};
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+
+		button-reset {
+			wakeup-source;
+			linux,code = <KEY_RESTART>;
+			label = "reset";
+			gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	spi {
+		compatible = "spi-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sck-gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+		mosi-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>;
+		miso-gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>;
+		cs-gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
+		num-chipselects = <1>;
+
+		ethernet-switch@0 {
+			compatible = "micrel,ks8995";
+			reg = <0>;
+			spi-max-frequency = <50000000>;
+
+			ethernet-ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				ethernet-port@0 {
+					reg = <0>;
+					label = "lan1";
+					phy-mode = "mii";
+					phy-handle = <&phy1>;
+				};
+				ethernet-port@1 {
+					reg = <1>;
+					label = "lan2";
+					phy-mode = "mii";
+					phy-handle = <&phy2>;
+				};
+				ethernet-port@2 {
+					reg = <2>;
+					label = "lan3";
+					phy-mode = "mii";
+					phy-handle = <&phy3>;
+				};
+				ethernet-port@3 {
+					reg = <3>;
+					label = "lan4";
+					phy-mode = "mii";
+					phy-handle = <&phy4>;
+				};
+				ethernet-port@4 {
+					reg = <4>;
+					ethernet = <&ethc>;
+					phy-mode = "mii";
+					fixed-link {
+						speed = <100>;
+						full-duplex;
+					};
+				};
+
+			};
+		};
+	};
+
+	soc {
+		bus@c4000000 {
+			flash@0,0 {
+				compatible = "intel,ixp4xx-flash", "cfi-flash";
+				bank-width = <2>;
+				/*
+				 * 8 MB of Flash in 64 0x20000 sized blocks
+				 * mapped in at CS0.
+				 */
+				reg = <0 0x00000000 0x0800000>;
+
+				/* Configure expansion bus to allow writes */
+				intel,ixp4xx-eb-write-enable = <1>;
+
+				partitions {
+					compatible = "redboot-fis";
+					fis-index-block = <0x3f>;
+				};
+			};
+			gpio1: gpio@1,0 {
+				/* MMIO GPIO at CS1 */
+				compatible = "intel,ixp4xx-expansion-bus-mmio-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+				big-endian;
+				reg = <1 0x00000000 0x2>;
+				reg-names = "dat";
+				/* Expansion bus settings */
+				intel,ixp4xx-eb-write-enable = <1>;
+
+				pci-reset-hog {
+					gpio-hog;
+					gpios = <7 GPIO_ACTIVE_HIGH>;
+					output-high;
+					line-name = "PCI reset";
+				};
+				pstn-relay-hog-1 {
+					gpio-hog;
+					gpios = <11 GPIO_ACTIVE_HIGH>;
+					output-low;
+					line-name = "PSTN relay control 1";
+				};
+				pstn-relay-hog-2 {
+					gpio-hog;
+					gpios = <12 GPIO_ACTIVE_HIGH>;
+					output-low;
+					line-name = "PSTN relay control 2";
+				};
+			};
+		};
+
+		pci@c0000000 {
+			status = "okay";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0xf800 0 0 7>;
+			interrupt-map =
+			/* IDSEL 13 */
+			<0x6800 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 13 is irq 8 */
+			<0x6800 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 13 is irq 6 */
+			/* IDSEL 14 */
+			<0x7000 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 14 is irq 7 */
+			<0x7000 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>, /* INT B on slot 14 is irq 8 */
+			/* IDSEL 15 */
+			<0x7800 0 0 1 &gpio0 8 IRQ_TYPE_LEVEL_LOW>, /* INT A on slot 15 is irq 6 */
+			<0x7800 0 0 2 &gpio0 6 IRQ_TYPE_LEVEL_LOW>; /* INT B on slot 15 is irq 7 */
+		};
+
+		ethb: ethernet@c8009000 {
+			status = "okay";
+			queue-rx = <&qmgr 3>;
+			queue-txready = <&qmgr 20>;
+			phy-mode = "mii";
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* 1, 2, 3 and 4 are ports on the KS8995 switch */
+				phy1: ethernet-phy@1 {
+					/* LAN1 */
+					reg = <1>;
+				};
+				phy2: ethernet-phy@2 {
+					/* LAN2 */
+					reg = <2>;
+				};
+				phy3: ethernet-phy@3 {
+					/* LAN3 */
+					reg = <3>;
+				};
+				phy4: ethernet-phy@4 {
+					/* LAN4 */
+					reg = <4>;
+				};
+			};
+		};
+
+		ethc: ethernet@c800a000 {
+			status = "okay";
+			queue-rx = <&qmgr 4>;
+			queue-txready = <&qmgr 21>;
+			phy-mode = "mii";
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts
index ce0d6514eeb5..e4794ccb8e41 100644
--- a/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts
+++ b/arch/arm/boot/dts/intel/socfpga/socfpga_cyclone5_sodia.dts
@@ -66,8 +66,10 @@
 	mdio0 {
 		#address-cells = <1>;
 		#size-cells = <0>;
-		phy0: ethernet-phy@0 {
-			reg = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy0: ethernet-phy@4 {
+			reg = <4>;
 			rxd0-skew-ps = <0>;
 			rxd1-skew-ps = <0>;
 			rxd2-skew-ps = <0>;
diff --git a/arch/arm/boot/dts/marvell/armada-370-db.dts b/arch/arm/boot/dts/marvell/armada-370-db.dts
index a7dc4c04d10b..a9a05d826f22 100644
--- a/arch/arm/boot/dts/marvell/armada-370-db.dts
+++ b/arch/arm/boot/dts/marvell/armada-370-db.dts
@@ -119,7 +119,7 @@
 			"Out Jack", "HPL",
 			"Out Jack", "HPR",
 			"AIN1L", "In Jack",
-			"AIN1L", "In Jack";
+			"AIN1R", "In Jack";
 		status = "okay";
 
 		simple-audio-card,dai-link@0 {
diff --git a/arch/arm/boot/dts/marvell/kirkwood-openrd-client.dts b/arch/arm/boot/dts/marvell/kirkwood-openrd-client.dts
index d4e0b8150a84..cf26e2ceaaa0 100644
--- a/arch/arm/boot/dts/marvell/kirkwood-openrd-client.dts
+++ b/arch/arm/boot/dts/marvell/kirkwood-openrd-client.dts
@@ -38,7 +38,7 @@
 		simple-audio-card,mclk-fs = <256>;
 
 		simple-audio-card,cpu {
-			sound-dai = <&audio0 0>;
+			sound-dai = <&audio0>;
 		};
 
 		simple-audio-card,codec {
diff --git a/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
index 7eaf6ca233ec..927c27260b6c 100644
--- a/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
+++ b/arch/arm/boot/dts/microchip/at91-sama7d65_curiosity.dts
@@ -11,6 +11,8 @@
 #include "sama7d65-pinfunc.h"
 #include "sama7d65.dtsi"
 #include <dt-bindings/mfd/atmel-flexcom.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/at91.h>
 
 / {
@@ -26,6 +28,43 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_key_gpio_default>;
+
+		button {
+			label = "PB_USER";
+			gpios = <&pioa PIN_PC10 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_PROG1>;
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_led_gpio_default>;
+
+		led0: led-red {
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&pioa PIN_PB17 GPIO_ACTIVE_HIGH>; /* Conflict with pwm. */
+		};
+
+		led1: led-green {
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&pioa PIN_PB15 GPIO_ACTIVE_HIGH>; /* Conflict with pwm. */
+		};
+
+		led2: led-blue {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&pioa PIN_PA21 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
 	memory@60000000 {
 		device_type = "memory";
 		reg = <0x60000000 0x40000000>;
@@ -346,12 +385,24 @@
 		bias-pull-up;
 	};
 
-	pinctrl_i2c10_default: i2c10-default{
+	pinctrl_i2c10_default: i2c10-default {
 		pinmux = <PIN_PB19__FLEXCOM10_IO1>,
 			 <PIN_PB20__FLEXCOM10_IO0>;
 		bias-pull-up;
 	};
 
+	pinctrl_key_gpio_default: key-gpio-default {
+		pinmux = <PIN_PC10__GPIO>;
+		bias-pull-up;
+	};
+
+	pinctrl_led_gpio_default: led-gpio-default {
+		pinmux = <PIN_PB15__GPIO>,
+			 <PIN_PB17__GPIO>,
+			 <PIN_PA21__GPIO>;
+		bias-pull-up;
+	};
+
 	pinctrl_sdmmc1_default: sdmmc1-default {
 		cmd-data {
 			pinmux = <PIN_PB22__SDMMC1_CMD>,
@@ -387,6 +438,8 @@
 
 &sdmmc1 {
 	bus-width = <4>;
+	no-1-8-v;
+	sdhci-caps-mask = <0x0 0x00200000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sdmmc1_default>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/microchip/sam9x7.dtsi b/arch/arm/boot/dts/microchip/sam9x7.dtsi
index 66c07e642c3e..46dacbbd201d 100644
--- a/arch/arm/boot/dts/microchip/sam9x7.dtsi
+++ b/arch/arm/boot/dts/microchip/sam9x7.dtsi
@@ -271,6 +271,27 @@
 			status = "disabled";
 		};
 
+		qspi: spi@f0014000 {
+			compatible = "microchip,sam9x7-ospi";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0xf0014000 0x100>, <0x60000000 0x20000000>;
+			reg-names = "qspi_base", "qspi_mmap";
+			interrupts = <35 IRQ_TYPE_LEVEL_HIGH 7>;
+			dmas = <&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				AT91_XDMAC_DT_PERID(26))>,
+				<&dma0
+				(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
+				AT91_XDMAC_DT_PERID(27))>;
+			dma-names = "tx", "rx";
+			clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&pmc PMC_TYPE_GCK 35>;
+			clock-names = "pclk", "gclk";
+			assigned-clocks = <&pmc PMC_TYPE_GCK 35>;
+			assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_PLLADIV2>;
+			status = "disabled";
+		};
+
 		i2s: i2s@f001c000 {
 			compatible = "microchip,sam9x7-i2smcc", "microchip,sam9x60-i2smcc";
 			reg = <0xf001c000 0x100>;
diff --git a/arch/arm/boot/dts/microchip/sama7d65.dtsi b/arch/arm/boot/dts/microchip/sama7d65.dtsi
index c191acc2c89f..e53e2dd6d530 100644
--- a/arch/arm/boot/dts/microchip/sama7d65.dtsi
+++ b/arch/arm/boot/dts/microchip/sama7d65.dtsi
@@ -91,7 +91,7 @@
 		};
 
 		sfrbu: sfr@e0008000 {
-			compatible ="microchip,sama7d65-sfrbu", "atmel,sama5d2-sfrbu", "syscon";
+			compatible = "microchip,sama7d65-sfrbu", "atmel,sama5d2-sfrbu", "syscon";
 			reg = <0xe0008000 0x20>;
 		};
 
@@ -506,6 +506,21 @@
 			#size-cells = <1>;
 			status = "disabled";
 
+			uart3: serial@200 {
+				compatible = "microchip,sama7d65-usart", "atmel,at91sam9260-usart";
+				reg = <0x200 0x200>;
+				interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&pmc PMC_TYPE_PERIPHERAL 37>;
+				clock-names = "usart";
+				dmas = <&dma0 AT91_XDMAC_DT_PERID(12)>,
+				       <&dma0 AT91_XDMAC_DT_PERID(11)>;
+				dma-names = "tx", "rx";
+				atmel,use-dma-rx;
+				atmel,use-dma-tx;
+				atmel,usart-mode = <AT91_USART_MODE_SERIAL>;
+				status = "disabled";
+			};
+
 			i2c3: i2c@600 {
 				compatible = "microchip,sama7d65-i2c", "microchip,sam9x60-i2c";
 				reg = <0x600 0x200>;
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi
index 791090f54d8b..98c35771534e 100644
--- a/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-common-npcm7xx.dtsi
@@ -134,7 +134,7 @@
 			status = "disabled";
 		};
 
-		gmac0: eth@f0802000 {
+		gmac0: ethernet@f0802000 {
 			device_type = "network";
 			compatible = "snps,dwmac";
 			reg = <0xf0802000 0x2000>;
diff --git a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi
index f42ad259636c..65fe3a180bb1 100644
--- a/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi
+++ b/arch/arm/boot/dts/nuvoton/nuvoton-npcm750.dtsi
@@ -44,7 +44,7 @@
 	};
 
 	ahb {
-		gmac1: eth@f0804000 {
+		gmac1: ethernet@f0804000 {
 			device_type = "network";
 			compatible = "snps,dwmac";
 			reg = <0xf0804000 0x2000>;
diff --git a/arch/arm/boot/dts/nvidia/Makefile b/arch/arm/boot/dts/nvidia/Makefile
index 7c1d3cb5dcf0..2ed2d923c8f9 100644
--- a/arch/arm/boot/dts/nvidia/Makefile
+++ b/arch/arm/boot/dts/nvidia/Makefile
@@ -14,6 +14,7 @@ dtb-$(CONFIG_ARCH_TEGRA_124_SOC) += \
 	tegra124-venice2.dtb
 dtb-$(CONFIG_ARCH_TEGRA_2x_SOC) += \
 	tegra20-acer-a500-picasso.dtb \
+	tegra20-asus-sl101.dtb \
 	tegra20-asus-tf101.dtb \
 	tegra20-harmony.dtb \
 	tegra20-colibri-eval-v3.dtb \
diff --git a/arch/arm/boot/dts/nvidia/tegra114.dtsi b/arch/arm/boot/dts/nvidia/tegra114.dtsi
index 4caf2073c556..a2a50f959927 100644
--- a/arch/arm/boot/dts/nvidia/tegra114.dtsi
+++ b/arch/arm/boot/dts/nvidia/tegra114.dtsi
@@ -4,6 +4,7 @@
 #include <dt-bindings/memory/tegra114-mc.h>
 #include <dt-bindings/pinctrl/pinctrl-tegra.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/nvidia,tegra114-car.h>
 #include <dt-bindings/soc/tegra-pmc.h>
 
 / {
@@ -693,6 +694,29 @@
 		#nvidia,mipi-calibrate-cells = <1>;
 	};
 
+	dfll: clock@70110000 {
+		compatible = "nvidia,tegra114-dfll";
+		reg = <0x70110000 0x100>, /* DFLL control */
+		      <0x70110000 0x100>, /* I2C output control */
+		      <0x70110100 0x100>, /* Integrated I2C controller */
+		      <0x70110200 0x100>; /* Look-up table RAM */
+		interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&tegra_car TEGRA114_CLK_DFLL_SOC>,
+			 <&tegra_car TEGRA114_CLK_DFLL_REF>,
+			 <&tegra_car TEGRA114_CLK_I2C5>;
+		clock-names = "soc", "ref", "i2c";
+		resets = <&tegra_car TEGRA114_RST_DFLL_DVCO>;
+		reset-names = "dvco";
+		#clock-cells = <0>;
+		clock-output-names = "dfllCPU_out";
+		nvidia,droop-ctrl = <0x00000f00>;
+		nvidia,force-mode = <1>;
+		nvidia,cf = <10>;
+		nvidia,ci = <0>;
+		nvidia,cg = <2>;
+		status = "disabled";
+	};
+
 	mmc@78000000 {
 		compatible = "nvidia,tegra114-sdhci";
 		reg = <0x78000000 0x200>;
@@ -824,6 +848,15 @@
 			device_type = "cpu";
 			compatible = "arm,cortex-a15";
 			reg = <0>;
+
+			clocks = <&tegra_car TEGRA114_CLK_CCLK_G>,
+				 <&tegra_car TEGRA114_CLK_CCLK_LP>,
+				 <&tegra_car TEGRA114_CLK_PLL_X>,
+				 <&tegra_car TEGRA114_CLK_PLL_P>,
+				 <&dfll>;
+			clock-names = "cpu_g", "cpu_lp", "pll_x", "pll_p", "dfll";
+			/* FIXME: what's the actual transition time? */
+			clock-latency = <300000>;
 		};
 
 		cpu1: cpu@1 {
diff --git a/arch/arm/boot/dts/nvidia/tegra20-asus-sl101.dts b/arch/arm/boot/dts/nvidia/tegra20-asus-sl101.dts
new file mode 100644
index 000000000000..8828129d1fa3
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra20-asus-sl101.dts
@@ -0,0 +1,61 @@
+// SPDX-License-Identifier: GPL-2.0
+/dts-v1/;
+
+#include "tegra20-asus-transformer-common.dtsi"
+
+/ {
+	model = "ASUS Eee Pad Slider SL101";
+	compatible = "asus,sl101", "nvidia,tegra20";
+
+	i2c@7000c000 {
+		magnetometer@e {
+			mount-matrix =  "1",  "0",  "0",
+					"0", "-1",  "0",
+					"0",  "0",  "1";
+		};
+
+		/* Atmel MXT1386 Touchscreen */
+		touchscreen@5a {
+			compatible = "atmel,maxtouch";
+			reg = <0x5a>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(V, 6) IRQ_TYPE_LEVEL_LOW>;
+
+			reset-gpios = <&gpio TEGRA_GPIO(Q, 7) GPIO_ACTIVE_LOW>;
+
+			vdda-supply = <&vdd_3v3_sys>;
+			vdd-supply  = <&vdd_3v3_sys>;
+
+			atmel,wakeup-method = <ATMEL_MXT_WAKEUP_I2C_SCL>;
+		};
+
+		gyroscope@68 {
+			mount-matrix =	 "0",  "1",  "0",
+					"-1",  "0",  "0",
+					 "0",  "0",  "1";
+
+			i2c-gate {
+				accelerometer@f {
+					mount-matrix =	 "1",  "0",  "0",
+							 "0", "-1",  "0",
+							 "0",  "0",  "1";
+				};
+			};
+		};
+	};
+
+	extcon-keys {
+		compatible = "gpio-keys";
+
+		switch-tablet-mode {
+			label = "Tablet Mode";
+			gpios = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_TABLET_MODE>;
+			debounce-interval = <500>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra20-asus-tf101.dts b/arch/arm/boot/dts/nvidia/tegra20-asus-tf101.dts
index 67764afeb013..0d93820a5ad4 100644
--- a/arch/arm/boot/dts/nvidia/tegra20-asus-tf101.dts
+++ b/arch/arm/boot/dts/nvidia/tegra20-asus-tf101.dts
@@ -1,542 +1,19 @@
 // SPDX-License-Identifier: GPL-2.0
 /dts-v1/;
 
-#include <dt-bindings/input/atmel-maxtouch.h>
-#include <dt-bindings/input/gpio-keys.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/thermal/thermal.h>
-
-#include "tegra20.dtsi"
-#include "tegra20-cpu-opp.dtsi"
-#include "tegra20-cpu-opp-microvolt.dtsi"
+#include "tegra20-asus-transformer-common.dtsi"
 
 / {
-	model = "ASUS EeePad Transformer TF101";
+	model = "ASUS Eee Pad Transformer TF101";
 	compatible = "asus,tf101", "nvidia,tegra20";
-	chassis-type = "convertible";
-
-	aliases {
-		mmc0 = &sdmmc4; /* eMMC */
-		mmc1 = &sdmmc3; /* MicroSD */
-		mmc2 = &sdmmc1; /* WiFi */
-
-		rtc0 = &pmic;
-		rtc1 = "/rtc@7000e000";
-
-		serial0 = &uartd;
-		serial1 = &uartc; /* Bluetooth */
-		serial2 = &uartb; /* GPS */
-	};
-
-	/*
-	 * The decompressor and also some bootloaders rely on a
-	 * pre-existing /chosen node to be available to insert the
-	 * command line and merge other ATAGS info.
-	 */
-	chosen {};
-
-	memory@0 {
-		reg = <0x00000000 0x40000000>;
-	};
-
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		ramoops@2ffe0000 {
-			compatible = "ramoops";
-			reg = <0x2ffe0000 0x10000>;	/* 64kB */
-			console-size = <0x8000>;	/* 32kB */
-			record-size = <0x400>;		/*  1kB */
-			ecc-size = <16>;
-		};
-
-		linux,cma@30000000 {
-			compatible = "shared-dma-pool";
-			alloc-ranges = <0x30000000 0x10000000>;
-			size = <0x10000000>; /* 256MiB */
-			linux,cma-default;
-			reusable;
-		};
-	};
-
-	host1x@50000000 {
-		dc@54200000 {
-			rgb {
-				status = "okay";
-
-				port {
-					lcd_output: endpoint {
-						remote-endpoint = <&lvds_encoder_input>;
-						bus-width = <18>;
-					};
-				};
-			};
-		};
-
-		hdmi@54280000 {
-			status = "okay";
-
-			vdd-supply = <&hdmi_vdd_reg>;
-			pll-supply = <&hdmi_pll_reg>;
-			hdmi-supply = <&vdd_hdmi_en>;
-
-			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
-			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
-				GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	gpio@6000d000 {
-		charging-enable-hog {
-			gpio-hog;
-			gpios = <TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
-			output-low;
-		};
-	};
-
-	pinmux@70000014 {
-		pinctrl-names = "default";
-		pinctrl-0 = <&state_default>;
-
-		state_default: pinmux {
-			ata {
-				nvidia,pins = "ata";
-				nvidia,function = "ide";
-			};
-
-			atb {
-				nvidia,pins = "atb", "gma", "gme";
-				nvidia,function = "sdio4";
-			};
-
-			atc {
-				nvidia,pins = "atc";
-				nvidia,function = "nand";
-			};
-
-			atd {
-				nvidia,pins = "atd", "ate", "gmb", "spia",
-					"spib", "spic";
-				nvidia,function = "gmi";
-			};
-
-			cdev1 {
-				nvidia,pins = "cdev1";
-				nvidia,function = "plla_out";
-			};
-
-			cdev2 {
-				nvidia,pins = "cdev2";
-				nvidia,function = "pllp_out4";
-			};
-
-			crtp {
-				nvidia,pins = "crtp";
-				nvidia,function = "crt";
-			};
-
-			lm1 {
-				nvidia,pins = "lm1";
-				nvidia,function = "rsvd3";
-			};
-
-			csus {
-				nvidia,pins = "csus";
-				nvidia,function = "vi_sensor_clk";
-			};
-
-			dap1 {
-				nvidia,pins = "dap1";
-				nvidia,function = "dap1";
-			};
-
-			dap2 {
-				nvidia,pins = "dap2";
-				nvidia,function = "dap2";
-			};
-
-			dap3 {
-				nvidia,pins = "dap3";
-				nvidia,function = "dap3";
-			};
-
-			dap4 {
-				nvidia,pins = "dap4";
-				nvidia,function = "dap4";
-			};
-
-			dta {
-				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
-				nvidia,function = "vi";
-			};
-
-			dtf {
-				nvidia,pins = "dtf";
-				nvidia,function = "i2c3";
-			};
-
-			gmc {
-				nvidia,pins = "gmc";
-				nvidia,function = "uartd";
-			};
-
-			gmd {
-				nvidia,pins = "gmd";
-				nvidia,function = "sflash";
-			};
-
-			gpu {
-				nvidia,pins = "gpu";
-				nvidia,function = "pwm";
-			};
-
-			gpu7 {
-				nvidia,pins = "gpu7";
-				nvidia,function = "rtck";
-			};
-
-			gpv {
-				nvidia,pins = "gpv", "slxa";
-				nvidia,function = "pcie";
-			};
-
-			hdint {
-				nvidia,pins = "hdint";
-				nvidia,function = "hdmi";
-			};
-
-			i2cp {
-				nvidia,pins = "i2cp";
-				nvidia,function = "i2cp";
-			};
-
-			irrx {
-				nvidia,pins = "irrx", "irtx";
-				nvidia,function = "uartb";
-			};
-
-			kbca {
-				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
-					"kbce", "kbcf";
-				nvidia,function = "kbc";
-			};
-
-			lcsn {
-				nvidia,pins = "lcsn", "ldc", "lm0", "lpw1",
-					"lsdi", "lvp0";
-				nvidia,function = "rsvd4";
-			};
-
-			ld0 {
-				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
-					"ld5", "ld6", "ld7", "ld8", "ld9",
-					"ld10", "ld11", "ld12", "ld13", "ld14",
-					"ld15", "ld16", "ld17", "ldi", "lhp0",
-					"lhp1", "lhp2", "lhs", "lpp", "lpw0",
-					"lpw2", "lsc0", "lsc1", "lsck", "lsda",
-					"lspi", "lvp1", "lvs";
-				nvidia,function = "displaya";
-			};
-
-			owc {
-				nvidia,pins = "owc", "spdi", "spdo", "uac";
-				nvidia,function = "rsvd2";
-			};
-
-			pmc {
-				nvidia,pins = "pmc";
-				nvidia,function = "pwr_on";
-			};
-
-			rm {
-				nvidia,pins = "rm";
-				nvidia,function = "i2c1";
-			};
-
-			sdb {
-				nvidia,pins = "sdb", "sdc", "sdd", "slxc", "slxk";
-				nvidia,function = "sdio3";
-			};
-
-			sdio1 {
-				nvidia,pins = "sdio1";
-				nvidia,function = "sdio1";
-			};
-
-			slxd {
-				nvidia,pins = "slxd";
-				nvidia,function = "spdif";
-			};
-
-			spid {
-				nvidia,pins = "spid", "spie", "spif";
-				nvidia,function = "spi1";
-			};
-
-			spig {
-				nvidia,pins = "spig", "spih";
-				nvidia,function = "spi2_alt";
-			};
-
-			uaa {
-				nvidia,pins = "uaa", "uab", "uda";
-				nvidia,function = "ulpi";
-			};
-
-			uad {
-				nvidia,pins = "uad";
-				nvidia,function = "irda";
-			};
-
-			uca {
-				nvidia,pins = "uca", "ucb";
-				nvidia,function = "uartc";
-			};
-
-			conf_ata {
-				nvidia,pins = "ata", "atb", "atc", "atd",
-					"cdev1", "cdev2", "dap1", "dap4",
-					"dte", "ddc", "dtf", "gma", "gmc",
-					"gme", "gpu", "gpu7", "gpv", "i2cp",
-					"irrx", "irtx", "pta", "rm", "sdc",
-					"sdd", "slxc", "slxd", "slxk", "spdi",
-					"spdo", "uac", "uad",
-					"uda", "csus";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			conf_ate {
-				nvidia,pins = "ate", "dap2", "dap3", "gmb", "gmd",
-					"owc", "spia", "spib", "spic",
-					"spid", "spie", "spig", "slxa";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-
-			conf_ck32 {
-				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
-					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
-				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
-			};
-
-			conf_crtp {
-				nvidia,pins = "crtp", "spih";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-
-			conf_dta {
-				nvidia,pins = "dta", "dtb", "dtc", "dtd";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			conf_spif {
-				nvidia,pins = "spif";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-
-			conf_hdint {
-				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
-					"lpw1", "lsck", "lsda", "lsdi", "lvp0";
-				nvidia,tristate = <TEGRA_PIN_ENABLE>;
-			};
-
-			conf_kbca {
-				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
-					"kbce", "kbcf", "sdio1", "uaa", "uab",
-					"uca", "ucb";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			conf_lc {
-				nvidia,pins = "lc", "ls";
-				nvidia,pull = <TEGRA_PIN_PULL_UP>;
-			};
-
-			conf_ld0 {
-				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
-					"ld5", "ld6", "ld7", "ld8", "ld9",
-					"ld10", "ld11", "ld12", "ld13", "ld14",
-					"ld15", "ld16", "ld17", "ldi", "lhp0",
-					"lhp1", "lhp2", "lhs", "lm0", "lpp",
-					"lpw0", "lpw2", "lsc0", "lsc1", "lspi",
-					"lvp1", "lvs", "pmc", "sdb";
-				nvidia,tristate = <TEGRA_PIN_DISABLE>;
-			};
-
-			conf_ld17_0 {
-				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
-					"ld23_22";
-				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
-			};
-
-			drive_sdio1 {
-				nvidia,pins = "drive_sdio1", "drive_ddc", "drive_vi1";
-				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
-				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
-				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
-				nvidia,pull-down-strength = <31>;
-				nvidia,pull-up-strength = <31>;
-				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
-				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
-			};
-
-			drive_csus {
-				nvidia,pins = "drive_csus";
-				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
-				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
-				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
-				nvidia,pull-down-strength = <31>;
-				nvidia,pull-up-strength = <31>;
-				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
-				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
-			};
-		};
-
-		state_i2cmux_ddc: pinmux-i2cmux-ddc {
-			ddc {
-				nvidia,pins = "ddc";
-				nvidia,function = "i2c2";
-			};
-
-			pta {
-				nvidia,pins = "pta";
-				nvidia,function = "rsvd4";
-			};
-		};
-
-		state_i2cmux_idle: pinmux-i2cmux-idle {
-			ddc {
-				nvidia,pins = "ddc";
-				nvidia,function = "rsvd4";
-			};
-
-			pta {
-				nvidia,pins = "pta";
-				nvidia,function = "rsvd4";
-			};
-		};
-
-		state_i2cmux_pta: pinmux-i2cmux-pta {
-			ddc {
-				nvidia,pins = "ddc";
-				nvidia,function = "rsvd4";
-			};
-
-			pta {
-				nvidia,pins = "pta";
-				nvidia,function = "i2c2";
-			};
-		};
-	};
-
-	spdif@70002400 {
-		status = "okay";
-
-		nvidia,fixed-parent-rate;
-	};
-
-	i2s@70002800 {
-		status = "okay";
-
-		nvidia,fixed-parent-rate;
-	};
-
-	serial@70006040 {
-		compatible = "nvidia,tegra20-hsuart";
-		reset-names = "serial";
-		/delete-property/ reg-shift;
-		/* GPS BCM4751 */
-	};
-
-	serial@70006200 {
-		compatible = "nvidia,tegra20-hsuart";
-		reset-names = "serial";
-		/delete-property/ reg-shift;
-		status = "okay";
-
-		/* Azurewave AW-NH615 BCM4329B1 */
-		bluetooth {
-			compatible = "brcm,bcm4329-bt";
-
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
-			interrupt-names = "host-wakeup";
-
-			/* PLLP 216MHz / 16 / 4 */
-			max-speed = <3375000>;
-
-			clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
-			clock-names = "txco";
-
-			vbat-supply  = <&vdd_3v3_sys>;
-			vddio-supply = <&vdd_1v8_sys>;
-
-			device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
-			shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
-		};
-	};
-
-	serial@70006300 {
-		/delete-property/ dmas;
-		/delete-property/ dma-names;
-		status = "okay";
-	};
-
-	pwm@7000a000 {
-		status = "okay";
-	};
 
 	i2c@7000c000 {
-		status = "okay";
-		clock-frequency = <400000>;
-
-		/* Aichi AMI306 digital compass */
 		magnetometer@e {
-			compatible = "asahi-kasei,ak8974";
-			reg = <0xe>;
-
-			avdd-supply = <&vdd_3v3_sys>;
-			dvdd-supply = <&vdd_1v8_sys>;
-
 			mount-matrix = "-1",  "0",  "0",
 					"0",  "1",  "0",
 					"0",  "0", "-1";
 		};
 
-		wm8903: audio-codec@1a {
-			compatible = "wlf,wm8903";
-			reg = <0x1a>;
-
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(X, 1) IRQ_TYPE_EDGE_BOTH>;
-
-			gpio-controller;
-			#gpio-cells = <2>;
-
-			micdet-cfg = <0x83>;
-			micdet-delay = <100>;
-
-			gpio-cfg = <
-				0x00000600 /* DMIC_LR, output */
-				0x00000680 /* DMIC_DAT, input */
-				0x00000000 /* Speaker-enable GPIO, output, low */
-				0xffffffff /* don't touch */
-				0xffffffff /* don't touch */
-			>;
-
-			AVDD-supply  = <&vdd_1v8_sys>;
-			CPVDD-supply = <&vdd_1v8_sys>;
-			DBVDD-supply = <&vdd_1v8_sys>;
-			DCVDD-supply = <&vdd_1v8_sys>;
-		};
-
 		/* Atmel MXT1386 Touchscreen */
 		touchscreen@5b {
 			compatible = "atmel,maxtouch";
@@ -554,33 +31,12 @@
 		};
 
 		gyroscope@68 {
-			compatible = "invensense,mpu3050";
-			reg = <0x68>;
-
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(Z, 4) IRQ_TYPE_EDGE_RISING>;
-
-			vdd-supply    = <&vdd_3v3_sys>;
-			vlogic-supply = <&vdd_1v8_sys>;
-
 			mount-matrix =	 "0",  "1",  "0",
 					"-1",  "0",  "0",
 					 "0",  "0",  "1";
 
 			i2c-gate {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
 				accelerometer@f {
-					compatible = "kionix,kxtf9";
-					reg = <0xf>;
-
-					interrupt-parent = <&gpio>;
-					interrupts = <TEGRA_GPIO(N, 4) IRQ_TYPE_EDGE_RISING>;
-
-					vdd-supply = <&vdd_1v8_sys>;
-					vddio-supply = <&vdd_1v8_sys>;
-
 					mount-matrix =	"-1",  "0",  "0",
 							 "0", "-1",  "0",
 							 "0",  "0", "-1";
@@ -589,461 +45,9 @@
 		};
 	};
 
-	i2c2: i2c@7000c400 {
-		status = "okay";
-		clock-frequency = <100000>;
-	};
-
-	i2c@7000c500 {
-		status = "okay";
-		clock-frequency = <400000>;
-	};
-
-	i2c@7000d000 {
-		status = "okay";
-		clock-frequency = <400000>;
-
-		pmic: pmic@34 {
-			compatible = "ti,tps6586x";
-			reg = <0x34>;
-			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-
-			ti,system-power-controller;
-
-			#gpio-cells = <2>;
-			gpio-controller;
-
-			sys-supply = <&vdd_5v0_sys>;
-			vin-sm0-supply = <&sys_reg>;
-			vin-sm1-supply = <&sys_reg>;
-			vin-sm2-supply = <&sys_reg>;
-			vinldo01-supply = <&sm2_reg>;
-			vinldo23-supply = <&sm2_reg>;
-			vinldo4-supply = <&sm2_reg>;
-			vinldo678-supply = <&sm2_reg>;
-			vinldo9-supply = <&sm2_reg>;
-
-			regulators {
-				sys_reg: sys {
-					regulator-name = "vdd_sys";
-					regulator-always-on;
-				};
-
-				vdd_core: sm0 {
-					regulator-name = "vdd_sm0,vdd_core";
-					regulator-min-microvolt = <950000>;
-					regulator-max-microvolt = <1300000>;
-					regulator-coupled-with = <&rtc_vdd &vdd_cpu>;
-					regulator-coupled-max-spread = <170000 550000>;
-					regulator-always-on;
-					regulator-boot-on;
-
-					nvidia,tegra-core-regulator;
-				};
-
-				vdd_cpu: sm1 {
-					regulator-name = "vdd_sm1,vdd_cpu";
-					regulator-min-microvolt = <750000>;
-					regulator-max-microvolt = <1125000>;
-					regulator-coupled-with = <&vdd_core &rtc_vdd>;
-					regulator-coupled-max-spread = <550000 550000>;
-					regulator-always-on;
-					regulator-boot-on;
-
-					nvidia,tegra-cpu-regulator;
-				};
-
-				sm2_reg: sm2 {
-					regulator-name = "vdd_sm2,vin_ldo*";
-					regulator-min-microvolt = <3700000>;
-					regulator-max-microvolt = <3700000>;
-					regulator-always-on;
-				};
-
-				/* LDO0 is not connected to anything */
-
-				ldo1 {
-					regulator-name = "vdd_ldo1,avdd_pll*";
-					regulator-min-microvolt = <1100000>;
-					regulator-max-microvolt = <1100000>;
-					regulator-always-on;
-				};
-
-				rtc_vdd: ldo2 {
-					regulator-name = "vdd_ldo2,vdd_rtc";
-					regulator-min-microvolt = <950000>;
-					regulator-max-microvolt = <1300000>;
-					regulator-coupled-with = <&vdd_core &vdd_cpu>;
-					regulator-coupled-max-spread = <170000 550000>;
-					regulator-always-on;
-					regulator-boot-on;
-
-					nvidia,tegra-rtc-regulator;
-				};
-
-				ldo3 {
-					regulator-name = "vdd_ldo3,avdd_usb*";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-
-				ldo4 {
-					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-					regulator-always-on;
-				};
-
-				vcore_emmc: ldo5 {
-					regulator-name = "vdd_ldo5,vcore_mmc";
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					regulator-always-on;
-				};
-
-				ldo6 {
-					regulator-name = "vdd_ldo6,avdd_vdac";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				hdmi_vdd_reg: ldo7 {
-					regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-				};
-
-				hdmi_pll_reg: ldo8 {
-					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
-					regulator-min-microvolt = <1800000>;
-					regulator-max-microvolt = <1800000>;
-				};
-
-				ldo9 {
-					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
-					regulator-min-microvolt = <2850000>;
-					regulator-max-microvolt = <2850000>;
-					regulator-always-on;
-				};
-
-				ldo_rtc {
-					regulator-name = "vdd_rtc_out,vdd_cell";
-					regulator-min-microvolt = <3300000>;
-					regulator-max-microvolt = <3300000>;
-					regulator-always-on;
-				};
-			};
-		};
-
-		nct1008: temperature-sensor@4c {
-			compatible = "onnn,nct1008";
-			reg = <0x4c>;
-			vcc-supply = <&vdd_3v3_sys>;
-
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(N, 6) IRQ_TYPE_EDGE_FALLING>;
-
-			#thermal-sensor-cells = <1>;
-		};
-	};
-
-	pmc@7000e400 {
-		nvidia,invert-interrupt;
-		nvidia,suspend-mode = <1>;
-		nvidia,cpu-pwr-good-time = <2000>;
-		nvidia,cpu-pwr-off-time = <100>;
-		nvidia,core-pwr-good-time = <3845 3845>;
-		nvidia,core-pwr-off-time = <458>;
-		nvidia,sys-clock-req-active-high;
-		core-supply = <&vdd_core>;
-	};
-
-	memory-controller@7000f400 {
-		nvidia,use-ram-code;
-
-		emc-tables@3 {
-			reg = <0x3>;
-
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			emc-table@25000 {
-				reg = <25000>;
-				compatible = "nvidia,tegra20-emc-table";
-				clock-frequency = <25000>;
-				nvidia,emc-registers = <0x00000002 0x00000006
-					0x00000003 0x00000003 0x00000006 0x00000004
-					0x00000002 0x00000009 0x00000003 0x00000003
-					0x00000002 0x00000002 0x00000002 0x00000004
-					0x00000003 0x00000008 0x0000000b 0x0000004d
-					0x00000000 0x00000003 0x00000003 0x00000003
-					0x00000008 0x00000001 0x0000000a 0x00000004
-					0x00000003 0x00000008 0x00000004 0x00000006
-					0x00000002 0x00000068 0x00000000 0x00000003
-					0x00000000 0x00000000 0x00000282 0xa0ae04ae
-					0x00070000 0x00000000 0x00000000 0x00000003
-					0x00000000 0x00000000 0x00000000 0x00000000>;
-			};
-
-			emc-table@50000 {
-				reg = <50000>;
-				compatible = "nvidia,tegra20-emc-table";
-				clock-frequency = <50000>;
-				nvidia,emc-registers = <0x00000003 0x00000007
-					0x00000003 0x00000003 0x00000006 0x00000004
-					0x00000002 0x00000009 0x00000003 0x00000003
-					0x00000002 0x00000002 0x00000002 0x00000005
-					0x00000003 0x00000008 0x0000000b 0x0000009f
-					0x00000000 0x00000003 0x00000003 0x00000003
-					0x00000008 0x00000001 0x0000000a 0x00000007
-					0x00000003 0x00000008 0x00000004 0x00000006
-					0x00000002 0x000000d0 0x00000000 0x00000000
-					0x00000000 0x00000000 0x00000282 0xa0ae04ae
-					0x00070000 0x00000000 0x00000000 0x00000005
-					0x00000000 0x00000000 0x00000000 0x00000000>;
-			};
-
-			emc-table@75000 {
-				reg = <75000>;
-				compatible = "nvidia,tegra20-emc-table";
-				clock-frequency = <75000>;
-				nvidia,emc-registers = <0x00000005 0x0000000a
-					0x00000004 0x00000003 0x00000006 0x00000004
-					0x00000002 0x00000009 0x00000003 0x00000003
-					0x00000002 0x00000002 0x00000002 0x00000005
-					0x00000003 0x00000008 0x0000000b 0x000000ff
-					0x00000000 0x00000003 0x00000003 0x00000003
-					0x00000008 0x00000001 0x0000000a 0x0000000b
-					0x00000003 0x00000008 0x00000004 0x00000006
-					0x00000002 0x00000138 0x00000000 0x00000000
-					0x00000000 0x00000000 0x00000282 0xa0ae04ae
-					0x00070000 0x00000000 0x00000000 0x00000007
-					0x00000000 0x00000000 0x00000000 0x00000000>;
-			};
-
-			emc-table@150000 {
-				reg = <150000>;
-				compatible = "nvidia,tegra20-emc-table";
-				clock-frequency = <150000>;
-				nvidia,emc-registers = <0x00000009 0x00000014
-					0x00000007 0x00000003 0x00000006 0x00000004
-					0x00000002 0x00000009 0x00000003 0x00000003
-					0x00000002 0x00000002 0x00000002 0x00000005
-					0x00000003 0x00000008 0x0000000b 0x0000021f
-					0x00000000 0x00000003 0x00000003 0x00000003
-					0x00000008 0x00000001 0x0000000a 0x00000015
-					0x00000003 0x00000008 0x00000004 0x00000006
-					0x00000002 0x00000270 0x00000000 0x00000001
-					0x00000000 0x00000000 0x00000282 0xa07c04ae
-					0x007dc010 0x00000000 0x00000000 0x0000000e
-					0x00000000 0x00000000 0x00000000 0x00000000>;
-			};
-
-			emc-table@300000 {
-				reg = <300000>;
-				compatible = "nvidia,tegra20-emc-table";
-				clock-frequency = <300000>;
-				nvidia,emc-registers = <0x00000012 0x00000027
-					0x0000000d 0x00000006 0x00000007 0x00000005
-					0x00000003 0x00000009 0x00000006 0x00000006
-					0x00000003 0x00000003 0x00000002 0x00000006
-					0x00000003 0x00000009 0x0000000c 0x0000045f
-					0x00000000 0x00000004 0x00000004 0x00000006
-					0x00000008 0x00000001 0x0000000e 0x0000002a
-					0x00000003 0x0000000f 0x00000007 0x00000005
-					0x00000002 0x000004e0 0x00000005 0x00000002
-					0x00000000 0x00000000 0x00000282 0xe059048b
-					0x007e0010 0x00000000 0x00000000 0x0000001b
-					0x00000000 0x00000000 0x00000000 0x00000000>;
-			};
-
-			lpddr2 {
-				compatible = "elpida,B8132B2PB-6D-F", "jedec,lpddr2-s4";
-				revision-id = <1 0>;
-				density = <2048>;
-				io-width = <16>;
-			};
-		};
-	};
-
-	/* Peripheral USB via ASUS connector */
-	usb@c5000000 {
-		compatible = "nvidia,tegra20-udc";
-		status = "okay";
-		dr_mode = "peripheral";
-	};
-
-	usb-phy@c5000000 {
-		status = "okay";
-		dr_mode = "peripheral";
-		nvidia,xcvr-setup-use-fuses;
-		nvidia,xcvr-lsfslew = <2>;
-		nvidia,xcvr-lsrslew = <2>;
-		vbus-supply = <&vdd_5v0_sys>;
-	};
-
-	/* Dock's USB port */
-	usb@c5008000 {
-		status = "okay";
-	};
-
-	usb-phy@c5008000 {
-		status = "okay";
-		nvidia,xcvr-setup-use-fuses;
-		vbus-supply = <&vdd_5v0_sys>;
-	};
-
-	sdmmc1: mmc@c8000000 {
-		status = "okay";
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		assigned-clocks = <&tegra_car TEGRA20_CLK_SDMMC1>;
-		assigned-clock-parents = <&tegra_car TEGRA20_CLK_PLL_C>;
-		assigned-clock-rates = <40000000>;
-
-		max-frequency = <40000000>;
-		keep-power-in-suspend;
-		bus-width = <4>;
-		non-removable;
-
-		mmc-pwrseq = <&brcm_wifi_pwrseq>;
-		vmmc-supply = <&vdd_3v3_sys>;
-		vqmmc-supply = <&vdd_3v3_sys>;
-
-		/* Azurewave AW-NH615 BCM4329B1 */
-		wifi@1 {
-			compatible = "brcm,bcm4329-fmac";
-			reg = <1>;
-
-			interrupt-parent = <&gpio>;
-			interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "host-wake";
-		};
-	};
-
-	sdmmc3: mmc@c8000400 {
-		status = "okay";
-		bus-width = <4>;
-		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
-		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
-		power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
-		vmmc-supply = <&vdd_3v3_sys>;
-		vqmmc-supply = <&vdd_3v3_sys>;
-	};
-
-	sdmmc4: mmc@c8000600 {
-		status = "okay";
-		bus-width = <8>;
-		vmmc-supply = <&vcore_emmc>;
-		vqmmc-supply = <&vdd_3v3_sys>;
-		non-removable;
-	};
-
-	mains: ac-adapter-detect {
-		compatible = "gpio-charger";
-		charger-type = "mains";
-		gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-
-		enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
-		power-supply = <&vdd_3v3_sys>;
-		pwms = <&pwm 2 4000000>;
-
-		brightness-levels = <7 255>;
-		num-interpolated-steps = <248>;
-		default-brightness-level = <20>;
-	};
-
-	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
-	clk32k_in: clock-32k-in {
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-		#clock-cells = <0>;
-	};
-
-	cpus {
-		cpu0: cpu@0 {
-			cpu-supply = <&vdd_cpu>;
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>;
-		};
-
-		cpu1: cpu@1 {
-			cpu-supply = <&vdd_cpu>;
-			operating-points-v2 = <&cpu0_opp_table>;
-			#cooling-cells = <2>;
-		};
-	};
-
-	display-panel {
-		compatible = "auo,b101ew05", "panel-lvds";
-
-		/* AUO B101EW05 using custom timings */
-
-		backlight = <&backlight>;
-		ddc-i2c-bus = <&lvds_ddc>;
-		power-supply = <&vdd_pnl_reg>;
-
-		width-mm = <218>;
-		height-mm = <135>;
-
-		data-mapping = "jeida-18";
-
-		panel-timing {
-			clock-frequency = <71200000>;
-			hactive = <1280>;
-			vactive = <800>;
-			hfront-porch = <8>;
-			hback-porch = <18>;
-			hsync-len = <184>;
-			vsync-len = <3>;
-			vfront-porch = <4>;
-			vback-porch = <8>;
-		};
-
-		port {
-			panel_input: endpoint {
-				remote-endpoint = <&lvds_encoder_output>;
-			};
-		};
-	};
-
-	gpio-keys {
+	extcon-keys {
 		compatible = "gpio-keys";
 
-		key-power {
-			label = "Power";
-			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_POWER>;
-			debounce-interval = <10>;
-			wakeup-event-action = <EV_ACT_ASSERTED>;
-			wakeup-source;
-		};
-
-		key-volume-down {
-			label = "Volume Down";
-			gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEDOWN>;
-			debounce-interval = <10>;
-			wakeup-event-action = <EV_ACT_ASSERTED>;
-			wakeup-source;
-		};
-
-		key-volume-up {
-			label = "Volume Up";
-			gpios = <&gpio TEGRA_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
-			linux,code = <KEY_VOLUMEUP>;
-			debounce-interval = <10>;
-			wakeup-event-action = <EV_ACT_ASSERTED>;
-			wakeup-source;
-		};
-
 		switch-dock-hall-sensor {
 			label = "Lid";
 			gpios = <&gpio TEGRA_GPIO(S, 4) GPIO_ACTIVE_LOW>;
@@ -1054,253 +58,4 @@
 			wakeup-source;
 		};
 	};
-
-	i2cmux {
-		compatible = "i2c-mux-pinctrl";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		i2c-parent = <&i2c2>;
-
-		pinctrl-names = "ddc", "pta", "idle";
-		pinctrl-0 = <&state_i2cmux_ddc>;
-		pinctrl-1 = <&state_i2cmux_pta>;
-		pinctrl-2 = <&state_i2cmux_idle>;
-
-		hdmi_ddc: i2c@0 {
-			reg = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-
-		lvds_ddc: i2c@1 {
-			reg = <1>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			smart-battery@b {
-				compatible = "ti,bq20z75", "sbs,sbs-battery";
-				reg = <0xb>;
-				sbs,i2c-retry-count = <2>;
-				sbs,poll-retry-count = <10>;
-				power-supplies = <&mains>;
-			};
-
-			/* Dynaimage ambient light sensor */
-			light-sensor@1c {
-				compatible = "dynaimage,al3000a";
-				reg = <0x1c>;
-
-				interrupt-parent = <&gpio>;
-				interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>;
-
-				vdd-supply = <&vdd_1v8_sys>;
-			};
-		};
-	};
-
-	lvds-encoder {
-		compatible = "ti,sn75lvds83", "lvds-encoder";
-
-		powerdown-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_LOW>;
-		power-supply = <&vdd_3v3_sys>;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				lvds_encoder_input: endpoint {
-					remote-endpoint = <&lcd_output>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				lvds_encoder_output: endpoint {
-					remote-endpoint = <&panel_input>;
-				};
-			};
-		};
-	};
-
-	opp-table-emc {
-		/delete-node/ opp-666000000;
-		/delete-node/ opp-760000000;
-	};
-
-	vdd_5v0_sys: regulator-5v0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_5v0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-	};
-
-	vdd_3v3_sys: regulator-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_3v3_vs";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		vin-supply = <&vdd_5v0_sys>;
-	};
-
-	regulator-pcie {
-		compatible = "regulator-fixed";
-		regulator-name = "pcie_vdd";
-		regulator-min-microvolt = <1500000>;
-		regulator-max-microvolt = <1500000>;
-		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
-		regulator-always-on;
-	};
-
-	vdd_pnl_reg: regulator-panel {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_pnl";
-		regulator-min-microvolt = <2800000>;
-		regulator-max-microvolt = <2800000>;
-		gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	vdd_1v8_sys: regulator-1v8 {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_1v8_vs";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		regulator-always-on;
-		vin-supply = <&vdd_5v0_sys>;
-	};
-
-	vdd_hdmi_en: regulator-hdmi {
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_5v0_hdmi_en";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		vin-supply = <&vdd_5v0_sys>;
-		gpio = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-	};
-
-	sound {
-		compatible = "asus,tegra-audio-wm8903-tf101",
-			     "nvidia,tegra-audio-wm8903";
-		nvidia,model = "Asus EeePad Transformer WM8903";
-
-		nvidia,audio-routing =
-			"Headphone Jack", "HPOUTR",
-			"Headphone Jack", "HPOUTL",
-			"Int Spk", "ROP",
-			"Int Spk", "RON",
-			"Int Spk", "LOP",
-			"Int Spk", "LON",
-			"IN2L", "Mic Jack",
-			"DMICDAT", "Int Mic";
-
-		nvidia,i2s-controller = <&tegra_i2s1>;
-		nvidia,audio-codec = <&wm8903>;
-
-		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
-		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
-		nvidia,mic-det-gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_LOW>;
-		nvidia,coupled-mic-hp-det;
-
-		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
-			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
-			 <&tegra_car TEGRA20_CLK_CDEV1>;
-		clock-names = "pll_a", "pll_a_out0", "mclk";
-	};
-
-	thermal-zones {
-		/*
-		 * NCT1008 has two sensors:
-		 *
-		 *	0: internal that monitors ambient/skin temperature
-		 *	1: external that is connected to the CPU's diode
-		 *
-		 * Ideally we should use userspace thermal governor,
-		 * but it's a much more complex solution.  The "skin"
-		 * zone is a simpler solution which prevents TF101 from
-		 * getting too hot from a user's tactile perspective.
-		 * The CPU zone is intended to protect silicon from damage.
-		 */
-
-		skin-thermal {
-			polling-delay-passive = <1000>; /* milliseconds */
-			polling-delay = <5000>; /* milliseconds */
-
-			thermal-sensors = <&nct1008 0>;
-
-			trips {
-				trip0: skin-alert {
-					/* start throttling at 60C */
-					temperature = <60000>;
-					hysteresis = <200>;
-					type = "passive";
-				};
-
-				trip1: skin-crit {
-					/* shut down at 70C */
-					temperature = <70000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-
-			cooling-maps {
-				map0 {
-					trip = <&trip0>;
-					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
-		};
-
-		cpu-thermal {
-			polling-delay-passive = <1000>; /* milliseconds */
-			polling-delay = <5000>; /* milliseconds */
-
-			thermal-sensors = <&nct1008 1>;
-
-			trips {
-				trip2: cpu-alert {
-					/* throttle at 85C until temperature drops to 84.8C */
-					temperature = <85000>;
-					hysteresis = <200>;
-					type = "passive";
-				};
-
-				trip3: cpu-crit {
-					/* shut down at 90C */
-					temperature = <90000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-
-			cooling-maps {
-				map1 {
-					trip = <&trip2>;
-					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
-							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
-				};
-			};
-		};
-	};
-
-	brcm_wifi_pwrseq: wifi-pwrseq {
-		compatible = "mmc-pwrseq-simple";
-
-		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
-		clock-names = "ext_clock";
-
-		reset-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_LOW>;
-		post-power-on-delay-ms = <200>;
-		power-off-delay-us = <200>;
-	};
 };
diff --git a/arch/arm/boot/dts/nvidia/tegra20-asus-transformer-common.dtsi b/arch/arm/boot/dts/nvidia/tegra20-asus-transformer-common.dtsi
new file mode 100644
index 000000000000..b48f53c00efa
--- /dev/null
+++ b/arch/arm/boot/dts/nvidia/tegra20-asus-transformer-common.dtsi
@@ -0,0 +1,1268 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <dt-bindings/input/atmel-maxtouch.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "tegra20.dtsi"
+#include "tegra20-cpu-opp.dtsi"
+#include "tegra20-cpu-opp-microvolt.dtsi"
+
+/ {
+	chassis-type = "convertible";
+
+	aliases {
+		mmc0 = &sdmmc4; /* eMMC */
+		mmc1 = &sdmmc3; /* MicroSD */
+		mmc2 = &sdmmc1; /* WiFi */
+
+		rtc0 = &pmic;
+		rtc1 = "/rtc@7000e000";
+
+		serial0 = &uartd;
+		serial1 = &uartc; /* Bluetooth */
+		serial2 = &uartb; /* GPS */
+	};
+
+	/*
+	 * The decompressor and also some bootloaders rely on a
+	 * pre-existing /chosen node to be available to insert the
+	 * command line and merge other ATAGS info.
+	 */
+	chosen {};
+
+	memory@0 {
+		reg = <0x00000000 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+
+		ramoops@2ffe0000 {
+			compatible = "ramoops";
+			reg = <0x2ffe0000 0x10000>;	/* 64kB */
+			console-size = <0x8000>;	/* 32kB */
+			record-size = <0x400>;		/*  1kB */
+			ecc-size = <16>;
+		};
+
+		linux,cma@30000000 {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0x30000000 0x10000000>;
+			size = <0x10000000>; /* 256MiB */
+			linux,cma-default;
+			reusable;
+		};
+	};
+
+	host1x@50000000 {
+		dc@54200000 {
+			rgb {
+				status = "okay";
+
+				port {
+					lcd_output: endpoint {
+						remote-endpoint = <&lvds_encoder_input>;
+						bus-width = <18>;
+					};
+				};
+			};
+		};
+
+		hdmi@54280000 {
+			status = "okay";
+
+			vdd-supply = <&hdmi_vdd_reg>;
+			pll-supply = <&hdmi_pll_reg>;
+			hdmi-supply = <&vdd_hdmi_en>;
+
+			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
+			nvidia,hpd-gpio = <&gpio TEGRA_GPIO(N, 7)
+				GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio@6000d000 {
+		charging-enable-hog {
+			gpio-hog;
+			gpios = <TEGRA_GPIO(R, 6) GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+	};
+
+	pinmux@70000014 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_default>;
+
+		state_default: pinmux {
+			ata {
+				nvidia,pins = "ata";
+				nvidia,function = "ide";
+			};
+
+			atb {
+				nvidia,pins = "atb", "gma", "gme";
+				nvidia,function = "sdio4";
+			};
+
+			atc {
+				nvidia,pins = "atc";
+				nvidia,function = "nand";
+			};
+
+			atd {
+				nvidia,pins = "atd", "ate", "gmb", "spia",
+					"spib", "spic";
+				nvidia,function = "gmi";
+			};
+
+			cdev1 {
+				nvidia,pins = "cdev1";
+				nvidia,function = "plla_out";
+			};
+
+			cdev2 {
+				nvidia,pins = "cdev2";
+				nvidia,function = "pllp_out4";
+			};
+
+			crtp {
+				nvidia,pins = "crtp";
+				nvidia,function = "crt";
+			};
+
+			lm1 {
+				nvidia,pins = "lm1";
+				nvidia,function = "rsvd3";
+			};
+
+			csus {
+				nvidia,pins = "csus";
+				nvidia,function = "vi_sensor_clk";
+			};
+
+			dap1 {
+				nvidia,pins = "dap1";
+				nvidia,function = "dap1";
+			};
+
+			dap2 {
+				nvidia,pins = "dap2";
+				nvidia,function = "dap2";
+			};
+
+			dap3 {
+				nvidia,pins = "dap3";
+				nvidia,function = "dap3";
+			};
+
+			dap4 {
+				nvidia,pins = "dap4";
+				nvidia,function = "dap4";
+			};
+
+			dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd", "dte";
+				nvidia,function = "vi";
+			};
+
+			dtf {
+				nvidia,pins = "dtf";
+				nvidia,function = "i2c3";
+			};
+
+			gmc {
+				nvidia,pins = "gmc";
+				nvidia,function = "uartd";
+			};
+
+			gmd {
+				nvidia,pins = "gmd";
+				nvidia,function = "sflash";
+			};
+
+			gpu {
+				nvidia,pins = "gpu";
+				nvidia,function = "pwm";
+			};
+
+			gpu7 {
+				nvidia,pins = "gpu7";
+				nvidia,function = "rtck";
+			};
+
+			gpv {
+				nvidia,pins = "gpv", "slxa";
+				nvidia,function = "pcie";
+			};
+
+			hdint {
+				nvidia,pins = "hdint";
+				nvidia,function = "hdmi";
+			};
+
+			i2cp {
+				nvidia,pins = "i2cp";
+				nvidia,function = "i2cp";
+			};
+
+			irrx {
+				nvidia,pins = "irrx", "irtx";
+				nvidia,function = "uartb";
+			};
+
+			kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf";
+				nvidia,function = "kbc";
+			};
+
+			lcsn {
+				nvidia,pins = "lcsn", "ldc", "lm0", "lpw1",
+					"lsdi", "lvp0";
+				nvidia,function = "rsvd4";
+			};
+
+			ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lpp", "lpw0",
+					"lpw2", "lsc0", "lsc1", "lsck", "lsda",
+					"lspi", "lvp1", "lvs";
+				nvidia,function = "displaya";
+			};
+
+			owc {
+				nvidia,pins = "owc", "spdi", "spdo", "uac";
+				nvidia,function = "rsvd2";
+			};
+
+			pmc {
+				nvidia,pins = "pmc";
+				nvidia,function = "pwr_on";
+			};
+
+			rm {
+				nvidia,pins = "rm";
+				nvidia,function = "i2c1";
+			};
+
+			sdb {
+				nvidia,pins = "sdb", "sdc", "sdd", "slxc", "slxk";
+				nvidia,function = "sdio3";
+			};
+
+			sdio1 {
+				nvidia,pins = "sdio1";
+				nvidia,function = "sdio1";
+			};
+
+			slxd {
+				nvidia,pins = "slxd";
+				nvidia,function = "spdif";
+			};
+
+			spid {
+				nvidia,pins = "spid", "spie", "spif";
+				nvidia,function = "spi1";
+			};
+
+			spig {
+				nvidia,pins = "spig", "spih";
+				nvidia,function = "spi2_alt";
+			};
+
+			uaa {
+				nvidia,pins = "uaa", "uab", "uda";
+				nvidia,function = "ulpi";
+			};
+
+			uad {
+				nvidia,pins = "uad";
+				nvidia,function = "irda";
+			};
+
+			uca {
+				nvidia,pins = "uca", "ucb";
+				nvidia,function = "uartc";
+			};
+
+			conf-ata {
+				nvidia,pins = "ata", "atb", "atc", "atd",
+					"cdev1", "cdev2", "dap1", "dap4",
+					"dte", "ddc", "dtf", "gma", "gmc",
+					"gme", "gpu", "gpu7", "gpv", "i2cp",
+					"irrx", "irtx", "pta", "rm", "sdc",
+					"sdd", "slxc", "slxd", "slxk", "spdi",
+					"spdo", "uac", "uad",
+					"uda", "csus";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			conf-ate {
+				nvidia,pins = "ate", "dap2", "dap3", "gmb", "gmd",
+					"owc", "spia", "spib", "spic",
+					"spid", "spie", "spig", "slxa";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			conf-ck32 {
+				nvidia,pins = "ck32", "ddrc", "pmca", "pmcb",
+					"pmcc", "pmcd", "pmce", "xm2c", "xm2d";
+				nvidia,pull = <TEGRA_PIN_PULL_NONE>;
+			};
+
+			conf-crtp {
+				nvidia,pins = "crtp", "spih";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			conf-dta {
+				nvidia,pins = "dta", "dtb", "dtc", "dtd";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			conf-spif {
+				nvidia,pins = "spif";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			conf-hdint {
+				nvidia,pins = "hdint", "lcsn", "ldc", "lm1",
+					"lpw1", "lsck", "lsda", "lsdi", "lvp0";
+				nvidia,tristate = <TEGRA_PIN_ENABLE>;
+			};
+
+			conf-kbca {
+				nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd",
+					"kbce", "kbcf", "sdio1", "uaa", "uab",
+					"uca", "ucb";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			conf-lc {
+				nvidia,pins = "lc", "ls";
+				nvidia,pull = <TEGRA_PIN_PULL_UP>;
+			};
+
+			conf-ld0 {
+				nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4",
+					"ld5", "ld6", "ld7", "ld8", "ld9",
+					"ld10", "ld11", "ld12", "ld13", "ld14",
+					"ld15", "ld16", "ld17", "ldi", "lhp0",
+					"lhp1", "lhp2", "lhs", "lm0", "lpp",
+					"lpw0", "lpw2", "lsc0", "lsc1", "lspi",
+					"lvp1", "lvs", "pmc", "sdb";
+				nvidia,tristate = <TEGRA_PIN_DISABLE>;
+			};
+
+			conf-ld17-0 {
+				nvidia,pins = "ld17_0", "ld19_18", "ld21_20",
+					"ld23_22";
+				nvidia,pull = <TEGRA_PIN_PULL_DOWN>;
+			};
+
+			drive-sdio1 {
+				nvidia,pins = "drive_sdio1", "drive_ddc", "drive_vi1";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_ENABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+
+			drive-csus {
+				nvidia,pins = "drive_csus";
+				nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>;
+				nvidia,schmitt = <TEGRA_PIN_DISABLE>;
+				nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>;
+				nvidia,pull-down-strength = <31>;
+				nvidia,pull-up-strength = <31>;
+				nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+				nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>;
+			};
+		};
+
+		state_i2cmux_ddc: pinmux-i2cmux-ddc {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "i2c2";
+			};
+
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+
+		state_i2cmux_idle: pinmux-i2cmux-idle {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "rsvd4";
+			};
+		};
+
+		state_i2cmux_pta: pinmux-i2cmux-pta {
+			ddc {
+				nvidia,pins = "ddc";
+				nvidia,function = "rsvd4";
+			};
+
+			pta {
+				nvidia,pins = "pta";
+				nvidia,function = "i2c2";
+			};
+		};
+	};
+
+	spdif@70002400 {
+		status = "okay";
+
+		nvidia,fixed-parent-rate;
+	};
+
+	i2s@70002800 {
+		status = "okay";
+
+		nvidia,fixed-parent-rate;
+	};
+
+	serial@70006040 {
+		compatible = "nvidia,tegra20-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
+		/* GPS BCM4751 */
+	};
+
+	serial@70006200 {
+		compatible = "nvidia,tegra20-hsuart";
+		reset-names = "serial";
+		/delete-property/ reg-shift;
+		status = "okay";
+
+		/* Azurewave AW-NH615 BCM4329B1 */
+		bluetooth {
+			compatible = "brcm,bcm4329-bt";
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(U, 6) IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "host-wakeup";
+
+			/* PLLP 216MHz / 16 / 4 */
+			max-speed = <3375000>;
+
+			clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+			clock-names = "txco";
+
+			vbat-supply  = <&vdd_3v3_sys>;
+			vddio-supply = <&vdd_1v8_sys>;
+
+			device-wakeup-gpios = <&gpio TEGRA_GPIO(U, 1) GPIO_ACTIVE_HIGH>;
+			shutdown-gpios = <&gpio TEGRA_GPIO(U, 0) GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	serial@70006300 {
+		/delete-property/ dmas;
+		/delete-property/ dma-names;
+		status = "okay";
+	};
+
+	pwm@7000a000 {
+		status = "okay";
+	};
+
+	i2c@7000c000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		/* Aichi AMI306 digital compass */
+		magnetometer@e {
+			compatible = "asahi-kasei,ak8974";
+			reg = <0xe>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(N, 5) IRQ_TYPE_EDGE_RISING>;
+
+			avdd-supply = <&vdd_3v3_sys>;
+			dvdd-supply = <&vdd_1v8_sys>;
+		};
+
+		wm8903: audio-codec@1a {
+			compatible = "wlf,wm8903";
+			reg = <0x1a>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(X, 3) IRQ_TYPE_EDGE_BOTH>;
+
+			gpio-controller;
+			#gpio-cells = <2>;
+
+			micdet-cfg = <0x83>;
+			micdet-delay = <100>;
+
+			gpio-cfg = <
+				0x00000600 /* DMIC_LR, output */
+				0x00000680 /* DMIC_DAT, input */
+				0x00000000 /* Speaker-enable GPIO, output, low */
+				0xffffffff /* don't touch */
+				0xffffffff /* don't touch */
+			>;
+
+			AVDD-supply  = <&vdd_1v8_sys>;
+			CPVDD-supply = <&vdd_1v8_sys>;
+			DBVDD-supply = <&vdd_1v8_sys>;
+			DCVDD-supply = <&vdd_1v8_sys>;
+		};
+
+		gyroscope@68 {
+			compatible = "invensense,mpu3050";
+			reg = <0x68>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(Z, 4) IRQ_TYPE_EDGE_RISING>;
+
+			vdd-supply    = <&vdd_3v3_sys>;
+			vlogic-supply = <&vdd_1v8_sys>;
+
+			i2c-gate {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				accelerometer@f {
+					compatible = "kionix,kxtf9";
+					reg = <0xf>;
+
+					interrupt-parent = <&gpio>;
+					interrupts = <TEGRA_GPIO(N, 4) IRQ_TYPE_EDGE_RISING>;
+
+					vdd-supply = <&vdd_1v8_sys>;
+					vddio-supply = <&vdd_1v8_sys>;
+				};
+			};
+		};
+	};
+
+	i2c2: i2c@7000c400 {
+		status = "okay";
+		clock-frequency = <100000>;
+	};
+
+	i2c@7000c500 {
+		status = "okay";
+		clock-frequency = <400000>;
+	};
+
+	i2c@7000d000 {
+		status = "okay";
+		clock-frequency = <400000>;
+
+		pmic: pmic@34 {
+			compatible = "ti,tps6586x";
+			reg = <0x34>;
+			interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+
+			ti,system-power-controller;
+
+			#gpio-cells = <2>;
+			gpio-controller;
+
+			sys-supply = <&vdd_5v0_sys>;
+			vin-sm0-supply = <&sys_reg>;
+			vin-sm1-supply = <&sys_reg>;
+			vin-sm2-supply = <&sys_reg>;
+			vinldo01-supply = <&sm2_reg>;
+			vinldo23-supply = <&sm2_reg>;
+			vinldo4-supply = <&sm2_reg>;
+			vinldo678-supply = <&sm2_reg>;
+			vinldo9-supply = <&sm2_reg>;
+
+			regulators {
+				sys_reg: sys {
+					regulator-name = "vdd_sys";
+					regulator-always-on;
+				};
+
+				vdd_core: sm0 {
+					regulator-name = "vdd_sm0,vdd_core";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-coupled-with = <&rtc_vdd &vdd_cpu>;
+					regulator-coupled-max-spread = <170000 550000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-core-regulator;
+				};
+
+				vdd_cpu: sm1 {
+					regulator-name = "vdd_sm1,vdd_cpu";
+					regulator-min-microvolt = <750000>;
+					regulator-max-microvolt = <1125000>;
+					regulator-coupled-with = <&vdd_core &rtc_vdd>;
+					regulator-coupled-max-spread = <550000 550000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-cpu-regulator;
+				};
+
+				sm2_reg: sm2 {
+					regulator-name = "vdd_sm2,vin_ldo*";
+					regulator-min-microvolt = <3700000>;
+					regulator-max-microvolt = <3700000>;
+					regulator-always-on;
+				};
+
+				/* LDO0 is not connected to anything */
+
+				ldo1 {
+					regulator-name = "vdd_ldo1,avdd_pll*";
+					regulator-min-microvolt = <1100000>;
+					regulator-max-microvolt = <1100000>;
+					regulator-always-on;
+				};
+
+				rtc_vdd: ldo2 {
+					regulator-name = "vdd_ldo2,vdd_rtc";
+					regulator-min-microvolt = <950000>;
+					regulator-max-microvolt = <1300000>;
+					regulator-coupled-with = <&vdd_core &vdd_cpu>;
+					regulator-coupled-max-spread = <170000 550000>;
+					regulator-always-on;
+					regulator-boot-on;
+
+					nvidia,tegra-rtc-regulator;
+				};
+
+				ldo3 {
+					regulator-name = "vdd_ldo3,avdd_usb*";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+
+				ldo4 {
+					regulator-name = "vdd_ldo4,avdd_osc,vddio_sys";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+					regulator-always-on;
+				};
+
+				vcore_emmc: ldo5 {
+					regulator-name = "vdd_ldo5,vcore_mmc";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo6 {
+					regulator-name = "vdd_ldo6,avdd_vdac";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				hdmi_vdd_reg: ldo7 {
+					regulator-name = "vdd_ldo7,avdd_hdmi,vdd_fuse";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+				};
+
+				hdmi_pll_reg: ldo8 {
+					regulator-name = "vdd_ldo8,avdd_hdmi_pll";
+					regulator-min-microvolt = <1800000>;
+					regulator-max-microvolt = <1800000>;
+				};
+
+				ldo9 {
+					regulator-name = "vdd_ldo9,avdd_2v85,vdd_ddr_rx";
+					regulator-min-microvolt = <2850000>;
+					regulator-max-microvolt = <2850000>;
+					regulator-always-on;
+				};
+
+				ldo_rtc {
+					regulator-name = "vdd_rtc_out,vdd_cell";
+					regulator-min-microvolt = <3300000>;
+					regulator-max-microvolt = <3300000>;
+					regulator-always-on;
+				};
+			};
+		};
+
+		nct1008: temperature-sensor@4c {
+			compatible = "onnn,nct1008";
+			reg = <0x4c>;
+			vcc-supply = <&vdd_3v3_sys>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(N, 6) IRQ_TYPE_EDGE_FALLING>;
+
+			#thermal-sensor-cells = <1>;
+		};
+	};
+
+	pmc@7000e400 {
+		nvidia,invert-interrupt;
+		nvidia,suspend-mode = <1>;
+		nvidia,cpu-pwr-good-time = <2000>;
+		nvidia,cpu-pwr-off-time = <100>;
+		nvidia,core-pwr-good-time = <3845 3845>;
+		nvidia,core-pwr-off-time = <458>;
+		nvidia,sys-clock-req-active-high;
+		core-supply = <&vdd_core>;
+	};
+
+	memory-controller@7000f400 {
+		nvidia,use-ram-code;
+
+		emc-tables@3 {
+			reg = <0x3>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			emc-table@25000 {
+				reg = <25000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <25000>;
+				nvidia,emc-registers = <0x00000002 0x00000006
+					0x00000003 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000004
+					0x00000003 0x00000008 0x0000000b 0x0000004d
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000004
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000068 0x00000000 0x00000003
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000003
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@50000 {
+				reg = <50000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <50000>;
+				nvidia,emc-registers = <0x00000003 0x00000007
+					0x00000003 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x0000009f
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000007
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x000000d0 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000005
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@75000 {
+				reg = <75000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <75000>;
+				nvidia,emc-registers = <0x00000005 0x0000000a
+					0x00000004 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x000000ff
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x0000000b
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000138 0x00000000 0x00000000
+					0x00000000 0x00000000 0x00000282 0xa0ae04ae
+					0x00070000 0x00000000 0x00000000 0x00000007
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@150000 {
+				reg = <150000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <150000>;
+				nvidia,emc-registers = <0x00000009 0x00000014
+					0x00000007 0x00000003 0x00000006 0x00000004
+					0x00000002 0x00000009 0x00000003 0x00000003
+					0x00000002 0x00000002 0x00000002 0x00000005
+					0x00000003 0x00000008 0x0000000b 0x0000021f
+					0x00000000 0x00000003 0x00000003 0x00000003
+					0x00000008 0x00000001 0x0000000a 0x00000015
+					0x00000003 0x00000008 0x00000004 0x00000006
+					0x00000002 0x00000270 0x00000000 0x00000001
+					0x00000000 0x00000000 0x00000282 0xa07c04ae
+					0x007dc010 0x00000000 0x00000000 0x0000000e
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			emc-table@300000 {
+				reg = <300000>;
+				compatible = "nvidia,tegra20-emc-table";
+				clock-frequency = <300000>;
+				nvidia,emc-registers = <0x00000012 0x00000027
+					0x0000000d 0x00000006 0x00000007 0x00000005
+					0x00000003 0x00000009 0x00000006 0x00000006
+					0x00000003 0x00000003 0x00000002 0x00000006
+					0x00000003 0x00000009 0x0000000c 0x0000045f
+					0x00000000 0x00000004 0x00000004 0x00000006
+					0x00000008 0x00000001 0x0000000e 0x0000002a
+					0x00000003 0x0000000f 0x00000007 0x00000005
+					0x00000002 0x000004e0 0x00000005 0x00000002
+					0x00000000 0x00000000 0x00000282 0xe059048b
+					0x007e0010 0x00000000 0x00000000 0x0000001b
+					0x00000000 0x00000000 0x00000000 0x00000000>;
+			};
+
+			lpddr2 {
+				compatible = "elpida,B8132B2PB-6D-F", "jedec,lpddr2-s4";
+				revision-id = <1 0>;
+				density = <2048>;
+				io-width = <16>;
+			};
+		};
+	};
+
+	/* Peripheral USB via ASUS connector */
+	usb@c5000000 {
+		compatible = "nvidia,tegra20-udc";
+		status = "okay";
+		dr_mode = "peripheral";
+	};
+
+	usb-phy@c5000000 {
+		status = "okay";
+		dr_mode = "peripheral";
+		nvidia,xcvr-setup-use-fuses;
+		nvidia,xcvr-lsfslew = <2>;
+		nvidia,xcvr-lsrslew = <2>;
+		vbus-supply = <&vdd_5v0_sys>;
+	};
+
+	/* Dock's USB port */
+	usb@c5008000 {
+		status = "okay";
+	};
+
+	usb-phy@c5008000 {
+		status = "okay";
+		nvidia,xcvr-setup-use-fuses;
+		vbus-supply = <&vdd_5v0_sys>;
+	};
+
+	sdmmc1: mmc@c8000000 {
+		status = "okay";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		assigned-clocks = <&tegra_car TEGRA20_CLK_SDMMC1>;
+		assigned-clock-parents = <&tegra_car TEGRA20_CLK_PLL_C>;
+		assigned-clock-rates = <40000000>;
+
+		max-frequency = <40000000>;
+		keep-power-in-suspend;
+		bus-width = <4>;
+		non-removable;
+
+		mmc-pwrseq = <&brcm_wifi_pwrseq>;
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vdd_3v3_sys>;
+
+		/* Azurewave AW-NH615 BCM4329B1 */
+		wifi@1 {
+			compatible = "brcm,bcm4329-fmac";
+			reg = <1>;
+
+			interrupt-parent = <&gpio>;
+			interrupts = <TEGRA_GPIO(S, 0) IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "host-wake";
+		};
+	};
+
+	sdmmc3: mmc@c8000400 {
+		status = "okay";
+		bus-width = <4>;
+		cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
+		wp-gpios = <&gpio TEGRA_GPIO(H, 1) GPIO_ACTIVE_HIGH>;
+		power-gpios = <&gpio TEGRA_GPIO(I, 6) GPIO_ACTIVE_HIGH>;
+		vmmc-supply = <&vdd_3v3_sys>;
+		vqmmc-supply = <&vdd_3v3_sys>;
+	};
+
+	sdmmc4: mmc@c8000600 {
+		status = "okay";
+		bus-width = <8>;
+		vmmc-supply = <&vcore_emmc>;
+		vqmmc-supply = <&vdd_3v3_sys>;
+		non-removable;
+	};
+
+	mains: ac-adapter-detect {
+		compatible = "gpio-charger";
+		charger-type = "mains";
+		gpios = <&gpio TEGRA_GPIO(V, 3) GPIO_ACTIVE_LOW>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+
+		enable-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>;
+		power-supply = <&vdd_3v3_sys>;
+		pwms = <&pwm 2 4000000>;
+
+		brightness-levels = <7 255>;
+		num-interpolated-steps = <248>;
+		default-brightness-level = <20>;
+	};
+
+	/* PMIC has a built-in 32KHz oscillator which is used by PMC */
+	clk32k_in: clock-32k-in {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		#clock-cells = <0>;
+	};
+
+	cpus {
+		cpu0: cpu@0 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+
+		cpu1: cpu@1 {
+			cpu-supply = <&vdd_cpu>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			#cooling-cells = <2>;
+		};
+	};
+
+	display-panel {
+		compatible = "auo,b101ew05", "panel-lvds";
+
+		/* AUO B101EW05 using custom timings */
+
+		backlight = <&backlight>;
+		ddc-i2c-bus = <&lvds_ddc>;
+		power-supply = <&vdd_pnl_reg>;
+
+		width-mm = <218>;
+		height-mm = <135>;
+
+		data-mapping = "jeida-18";
+
+		panel-timing {
+			clock-frequency = <71200000>;
+			hactive = <1280>;
+			vactive = <800>;
+			hfront-porch = <8>;
+			hback-porch = <18>;
+			hsync-len = <184>;
+			vsync-len = <3>;
+			vfront-porch = <4>;
+			vback-porch = <8>;
+		};
+
+		port {
+			panel_input: endpoint {
+				remote-endpoint = <&lvds_encoder_output>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-power {
+			label = "Power";
+			gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&gpio TEGRA_GPIO(Q, 4) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEDOWN>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&gpio TEGRA_GPIO(Q, 5) GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <10>;
+			wakeup-event-action = <EV_ACT_ASSERTED>;
+			wakeup-source;
+		};
+	};
+
+	i2cmux {
+		compatible = "i2c-mux-pinctrl";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		i2c-parent = <&i2c2>;
+
+		pinctrl-names = "ddc", "pta", "idle";
+		pinctrl-0 = <&state_i2cmux_ddc>;
+		pinctrl-1 = <&state_i2cmux_pta>;
+		pinctrl-2 = <&state_i2cmux_idle>;
+
+		hdmi_ddc: i2c@0 {
+			reg = <0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+		};
+
+		lvds_ddc: i2c@1 {
+			reg = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			smart-battery@b {
+				compatible = "ti,bq20z75", "sbs,sbs-battery";
+				reg = <0xb>;
+				sbs,i2c-retry-count = <2>;
+				sbs,poll-retry-count = <10>;
+				power-supplies = <&mains>;
+			};
+
+			/* Dynaimage ambient light sensor */
+			light-sensor@1c {
+				compatible = "dynaimage,al3000a";
+				reg = <0x1c>;
+
+				interrupt-parent = <&gpio>;
+				interrupts = <TEGRA_GPIO(Z, 2) IRQ_TYPE_LEVEL_HIGH>;
+
+				vdd-supply = <&vdd_1v8_sys>;
+			};
+		};
+	};
+
+	lvds-encoder {
+		compatible = "ti,sn75lvds83", "lvds-encoder";
+
+		powerdown-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_LOW>;
+		power-supply = <&vdd_3v3_sys>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_encoder_input: endpoint {
+					remote-endpoint = <&lcd_output>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_encoder_output: endpoint {
+					remote-endpoint = <&panel_input>;
+				};
+			};
+		};
+	};
+
+	opp-table-emc {
+		/delete-node/ opp-666000000;
+		/delete-node/ opp-760000000;
+	};
+
+	vdd_5v0_sys: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	vdd_3v3_sys: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_3v3_vs";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	regulator-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "pcie_vdd";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&pmic 0 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+	};
+
+	vdd_pnl_reg: regulator-panel {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_pnl";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		gpio = <&gpio TEGRA_GPIO(C, 6) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vdd_1v8_sys: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_1v8_vs";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+	};
+
+	vdd_hdmi_en: regulator-hdmi {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_5v0_hdmi_en";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		vin-supply = <&vdd_5v0_sys>;
+		gpio = <&gpio TEGRA_GPIO(V, 5) GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	sound {
+		compatible = "asus,tegra-audio-wm8903-tf101",
+			     "nvidia,tegra-audio-wm8903";
+		nvidia,model = "Asus EeePad Transformer WM8903";
+
+		nvidia,audio-routing =
+			"Headphone Jack", "HPOUTR",
+			"Headphone Jack", "HPOUTL",
+			"Int Spk", "ROP",
+			"Int Spk", "RON",
+			"Int Spk", "LOP",
+			"Int Spk", "LON",
+			"IN2L", "Mic Jack",
+			"DMICDAT", "Int Mic";
+
+		nvidia,i2s-controller = <&tegra_i2s1>;
+		nvidia,audio-codec = <&wm8903>;
+
+		nvidia,spkr-en-gpios = <&wm8903 2 GPIO_ACTIVE_HIGH>;
+		nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(W, 2) GPIO_ACTIVE_LOW>;
+		nvidia,mic-det-gpios = <&gpio TEGRA_GPIO(X, 1) GPIO_ACTIVE_LOW>;
+		nvidia,coupled-mic-hp-det;
+
+		clocks = <&tegra_car TEGRA20_CLK_PLL_A>,
+			 <&tegra_car TEGRA20_CLK_PLL_A_OUT0>,
+			 <&tegra_car TEGRA20_CLK_CDEV1>;
+		clock-names = "pll_a", "pll_a_out0", "mclk";
+	};
+
+	thermal-zones {
+		/*
+		 * NCT1008 has two sensors:
+		 *
+		 *	0: internal that monitors ambient/skin temperature
+		 *	1: external that is connected to the CPU's diode
+		 *
+		 * Ideally we should use userspace thermal governor,
+		 * but it's a much more complex solution.  The "skin"
+		 * zone is a simpler solution which prevents TF101 from
+		 * getting too hot from a user's tactile perspective.
+		 * The CPU zone is intended to protect silicon from damage.
+		 */
+
+		skin-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct1008 0>;
+
+			trips {
+				trip0: skin-alert {
+					/* start throttling at 60C */
+					temperature = <60000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip1: skin-crit {
+					/* shut down at 70C */
+					temperature = <70000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&trip0>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		cpu-thermal {
+			polling-delay-passive = <1000>; /* milliseconds */
+			polling-delay = <5000>; /* milliseconds */
+
+			thermal-sensors = <&nct1008 1>;
+
+			trips {
+				trip2: cpu-alert {
+					/* throttle at 85C until temperature drops to 84.8C */
+					temperature = <85000>;
+					hysteresis = <200>;
+					type = "passive";
+				};
+
+				trip3: cpu-crit {
+					/* shut down at 90C */
+					temperature = <90000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map1 {
+					trip = <&trip2>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
+
+	brcm_wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+
+		clocks = <&tegra_pmc TEGRA_PMC_CLK_BLINK>;
+		clock-names = "ext_clock";
+
+		reset-gpios = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_LOW>;
+		post-power-on-delay-ms = <200>;
+		power-off-delay-us = <200>;
+	};
+};
diff --git a/arch/arm/boot/dts/nvidia/tegra30-lg-p880.dts b/arch/arm/boot/dts/nvidia/tegra30-lg-p880.dts
index 2f7754fd42a1..c6ef0a20c19f 100644
--- a/arch/arm/boot/dts/nvidia/tegra30-lg-p880.dts
+++ b/arch/arm/boot/dts/nvidia/tegra30-lg-p880.dts
@@ -108,8 +108,8 @@
 	i2c@7000c400 {
 		touchscreen@20 {
 			rmi4-f11@11 {
-				syna,clip-x-high = <1110>;
-				syna,clip-y-high = <1973>;
+				syna,clip-x-high = <1440>;
+				syna,clip-y-high = <2560>;
 
 				touchscreen-inverted-y;
 			};
diff --git a/arch/arm/boot/dts/nxp/imx/imx35-eukrea-cpuimx35.dtsi b/arch/arm/boot/dts/nxp/imx/imx35-eukrea-cpuimx35.dtsi
index ef546525e2ec..0064b5452b54 100644
--- a/arch/arm/boot/dts/nxp/imx/imx35-eukrea-cpuimx35.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx35-eukrea-cpuimx35.dtsi
@@ -26,7 +26,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pcf8563@51 {
+	rtc@51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx51-eukrea-cpuimx51.dtsi b/arch/arm/boot/dts/nxp/imx/imx51-eukrea-cpuimx51.dtsi
index 0a150c91d30f..244740d65b3d 100644
--- a/arch/arm/boot/dts/nxp/imx/imx51-eukrea-cpuimx51.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx51-eukrea-cpuimx51.dtsi
@@ -26,7 +26,7 @@
 	pinctrl-0 = <&pinctrl_i2c1>;
 	status = "okay";
 
-	pcf8563@51 {
+	rtc@51 {
 		compatible = "nxp,pcf8563";
 		reg = <0x51>;
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-kp.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-kp.dtsi
index ebbd4d93e460..543cf723008f 100644
--- a/arch/arm/boot/dts/nxp/imx/imx53-kp.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx53-kp.dtsi
@@ -42,14 +42,14 @@
 		led-bus {
 			label = "bus";
 			gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
+			linux,default-trigger = "none";
 			default-state = "off";
 		};
 
 		led-error {
 			label = "error";
 			gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
+			linux,default-trigger = "none";
 			default-state = "off";
 		};
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx53-m53.dtsi b/arch/arm/boot/dts/nxp/imx/imx53-m53.dtsi
index df543b4751e0..89b17509ad48 100644
--- a/arch/arm/boot/dts/nxp/imx/imx53-m53.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx53-m53.dtsi
@@ -47,7 +47,7 @@
 		interrupt-parent = <&gpio7>;
 		irq-trigger = <0x1>;
 
-		stmpe_touchscreen {
+		touchscreen {
 			compatible = "st,stmpe-ts";
 			st,sample-time = <4>;
 			st,mod-12b = <1>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-alti6p.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-alti6p.dts
index 4989e8d069a1..9bb36db131c2 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-alti6p.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-alti6p.dts
@@ -25,7 +25,7 @@
 		clock-output-names = "enet_ref_pad";
 	};
 
-	i2c2-mux {
+	i2c-mux-2 {
 		compatible = "i2c-mux";
 		i2c-parent = <&i2c2>;
 		mux-controls = <&i2c_mux>;
@@ -45,7 +45,7 @@
 		};
 	};
 
-	i2c4-mux {
+	i2c-mux-4 {
 		compatible = "i2c-mux";
 		i2c-parent = <&i2c4>;
 		mux-controls = <&i2c_mux>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dts
index c9b2ea2b24b2..fc62ba2a4fcb 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_4.dts
@@ -1,44 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * support for the imx6 based aristainetos2 board
  *
  * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 /dts-v1/;
 #include "imx6dl.dtsi"
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_7.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_7.dts
index 5e15212eaf3a..a7400d42475b 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_7.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-aristainetos2_7.dts
@@ -1,44 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * support for the imx6 based aristainetos2 board
  *
  * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 /dts-v1/;
 #include "imx6dl.dtsi"
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-prtmvt.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-prtmvt.dts
index 0b1275a8891f..2160b7177835 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-prtmvt.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-prtmvt.dts
@@ -557,7 +557,6 @@
 
 &usbh1 {
 	vbus-supply = <&reg_h1_vbus>;
-	pinctrl-names = "default";
 	phy_type = "utmi";
 	dr_mode = "host";
 	disable-over-current;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi
index de80ca141bca..7a3b96315eaf 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-qmx6.dtsi
@@ -157,7 +157,7 @@
 	sda-gpios = <&gpio1 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 	status = "okay";
 
-	rtc: m41t62@68 {
+	rtc: rtc@68 {
 		compatible = "st,m41t62";
 		reg = <0x68>;
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6dl-riotboard.dts b/arch/arm/boot/dts/nxp/imx/imx6dl-riotboard.dts
index e9ac4768f36c..55b7e91d2ac0 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6dl-riotboard.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6dl-riotboard.dts
@@ -389,8 +389,6 @@
 };
 
 &iomuxc {
-	pinctrl-names = "default";
-
 	pinctrl_audmux: audmuxgrp {
 		fsl,pins = <
 			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi
index d77472519086..53013b12c2ec 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-ba16.dtsi
@@ -222,6 +222,8 @@
 		pinctrl-0 = <&pinctrl_pmic>;
 		interrupt-parent = <&gpio7>;
 		interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		onkey {
 			compatible = "dlg,da9063-onkey";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi
index aa1adcc74019..e1d0c6e123fd 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-bx50v3.dtsi
@@ -160,7 +160,7 @@
 	pinctrl-0 = <&pinctrl_ecspi5>;
 	status = "okay";
 
-	m25_eeprom: flash@0 {
+	m25_eeprom: eeprom@0 {
 		compatible = "atmel,at25";
 		spi-max-frequency = <10000000>;
 		size = <0x8000>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-display5-tianma-tm070-1280x768.dts b/arch/arm/boot/dts/nxp/imx/imx6q-display5-tianma-tm070-1280x768.dts
index 16658b76fc4e..059750270fc4 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-display5-tianma-tm070-1280x768.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-display5-tianma-tm070-1280x768.dts
@@ -1,38 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2017
  * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2.  This program is licensed "as is" without
- *     any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-display5.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-display5.dtsi
index 4ab31f2217cd..4e448b4810f2 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-display5.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-display5.dtsi
@@ -1,38 +1,7 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * Copyright 2017
  * Lukasz Majewski, DENX Software Engineering, lukma@denx.de
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is licensed under the terms of the GNU General Public
- *     License version 2.  This program is licensed "as is" without
- *     any warranty of any kind, whether express or implied.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 
 /dts-v1/;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts b/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts
index c5525b2c1dbd..17fabff80e90 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-dmo-edmqmx6.dts
@@ -266,7 +266,7 @@
 		reg = <0x4d>;
 	};
 
-	rtc: m41t62@68 {
+	rtc: rtc@68 {
 		compatible = "st,m41t62";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-dms-ba16.dts b/arch/arm/boot/dts/nxp/imx/imx6q-dms-ba16.dts
index d2d0a82ea178..484a60892229 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-dms-ba16.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-dms-ba16.dts
@@ -47,7 +47,7 @@
 	pinctrl-0 = <&pinctrl_ecspi5>;
 	status = "okay";
 
-	m25_eeprom: flash@0 {
+	m25_eeprom: eeprom@0 {
 		compatible = "atmel,at25256B", "atmel,at25";
 		spi-max-frequency = <20000000>;
 		size = <0x8000>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-gw5400-a.dts b/arch/arm/boot/dts/nxp/imx/imx6q-gw5400-a.dts
index c5c144879fa6..bf8fde9cb38d 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-gw5400-a.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-gw5400-a.dts
@@ -184,7 +184,7 @@
 		#gpio-cells = <2>;
 	};
 
-	rtc: ds1672@68 {
+	rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-h100.dts b/arch/arm/boot/dts/nxp/imx/imx6q-h100.dts
index 46e011a363e8..4c8ea4381559 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-h100.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-h100.dts
@@ -171,7 +171,7 @@
 		reg = <0x51>;
 	};
 
-	rtc: pcf8523@68 {
+	rtc: rtc@68 {
 		compatible = "nxp,pcf8523";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-kp.dtsi b/arch/arm/boot/dts/nxp/imx/imx6q-kp.dtsi
index c425d427663d..d6deb8c22b8c 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-kp.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-kp.dtsi
@@ -69,14 +69,14 @@
 		led-green {
 			label = "led1";
 			gpios = <&gpio3 16 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
+			linux,default-trigger = "none";
 			default-state = "off";
 		};
 
 		led-red {
 			label = "led0";
 			gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
+			linux,default-trigger = "none";
 			default-state = "off";
 		};
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts b/arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts
index bba82126aaaa..ef5c0eda8b15 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-mccmon6.dts
@@ -292,8 +292,6 @@
 };
 
 &iomuxc {
-	pinctrl-names = "default";
-
 	pinctrl_backlight: dispgrp {
 		fsl,pins = <
 			/* BLEN_OUT */
diff --git a/arch/arm/boot/dts/nxp/imx/imx6q-novena.dts b/arch/arm/boot/dts/nxp/imx/imx6q-novena.dts
index 8c3a9ea8d5b3..24fc3ff1c70c 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6q-novena.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6q-novena.dts
@@ -265,7 +265,7 @@
 		reg = <0x1c>;
 	};
 
-	rtc: pcf8523@68 {
+	rtc: rtc@68 {
 		compatible = "nxp,pcf8523";
 		reg = <0x68>;
 	};
@@ -288,7 +288,7 @@
 		vio-supply = <&reg_3p3v>;
 		vcc-supply = <&reg_3p3v>;
 
-		stmpe_touchscreen {
+		touchscreen {
 			compatible = "st,stmpe-ts";
 			st,sample-time = <4>;
 			st,mod-12b = <1>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
index b13000a62a7b..5fcd7cdb7001 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-apalis.dtsi
@@ -648,7 +648,7 @@
 		/* ADC conversion time: 80 clocks */
 		st,sample-time = <4>;
 
-		stmpe_ts: stmpe_touchscreen {
+		stmpe_ts: touchscreen {
 			compatible = "st,stmpe-ts";
 			/* 8 sample average control */
 			st,ave-ctrl = <3>;
@@ -665,7 +665,7 @@
 			st,touch-det-delay = <5>;
 		};
 
-		stmpe_adc: stmpe_adc {
+		stmpe_adc: adc {
 			compatible = "st,stmpe-adc";
 			#io-channel-cells = <1>;
 			/* forbid to use ADC channels 3-0 (touch) */
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi
index 7cc7ae195988..01d4ea20b13d 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-aristainetos2.dtsi
@@ -1,44 +1,8 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR MIT)
 /*
  * support for the imx6 based aristainetos2 board
  *
  * Copyright (C) 2015 Heiko Schocher <hs@denx.de>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     version 2 as published by the Free Software Foundation.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
  */
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/clock/imx6qdl-clock.h>
@@ -150,6 +114,8 @@
 		reg = <0x58>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <04 0x8>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
 
 		regulators {
 			bcore1 {
@@ -324,8 +290,9 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
-		ethphy: ethernet-phy {
+		ethphy: ethernet-phy@0 {
 			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
 			txd0-skew-ps = <0>;
 			txd1-skew-ps = <0>;
 			txd2-skew-ps = <0>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
index 3525cbcda57f..419d85b5a660 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-colibri.dtsi
@@ -572,7 +572,7 @@
 		/* ADC converstion time: 80 clocks */
 		st,sample-time = <4>;
 
-		stmpe_ts: stmpe_touchscreen {
+		stmpe_ts: touchscreen {
 			compatible = "st,stmpe-ts";
 			/* 8 sample average control */
 			st,ave-ctrl = <3>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi
index 41d073f5bfe7..c504cf7e9492 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-cubox-i.dtsi
@@ -118,7 +118,7 @@
 		pinctrl-0 = <&pinctrl_gpio_key>;
 		pinctrl-names = "default";
 
-		button_0 {
+		button-0 {
 			label = "Button 0";
 			gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
index 97763db3959f..9f4e746beb2d 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-emcon.dtsi
@@ -33,7 +33,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_emcon_wake>;
 
-		wake {
+		key-wake {
 			label = "Wake";
 			linux,code = <KEY_WAKEUP>;
 			gpios = <&gpio3 2 GPIO_ACTIVE_LOW>;
@@ -225,6 +225,8 @@
 		pinctrl-0 = <&pinctrl_pmic>;
 		interrupt-parent = <&gpio2>;
 		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
 
 		onkey {
 			compatible = "dlg,da9063-onkey";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw51xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw51xx.dtsi
index e75e1a5364b8..beff5a0f58ab 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw51xx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw51xx.dtsi
@@ -24,13 +24,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -44,21 +44,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -156,6 +156,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
@@ -270,7 +271,7 @@
 		pagesize = <16>;
 	};
 
-	rtc: ds1672@68 {
+	rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi
index b57f4073f881..9d3ba4083216 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw52xx.dtsi
@@ -33,13 +33,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -53,21 +53,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -230,6 +230,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
@@ -350,7 +351,7 @@
 		pagesize = <16>;
 	};
 
-	rtc: ds1672@68 {
+	rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi
index 090c0057d117..7e84e0a52ef3 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw53xx.dtsi
@@ -33,13 +33,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -53,21 +53,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -223,6 +223,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
@@ -349,7 +350,7 @@
 		pagesize = <16>;
 	};
 
-	rtc: ds1672@68 {
+	rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi
index 94f1d1ae59aa..81394d47dd68 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw54xx.dtsi
@@ -34,13 +34,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -54,21 +54,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -376,7 +376,7 @@
 		pagesize = <16>;
 	};
 
-	rtc: ds1672@68 {
+	rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw551x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw551x.dtsi
index 009a9d56757c..6136a95b9259 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw551x.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw551x.dtsi
@@ -26,13 +26,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -46,21 +46,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -179,6 +179,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
@@ -287,7 +288,7 @@
 		pagesize = <16>;
 	};
 
-	rtc: ds1672@68 {
+	rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw552x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw552x.dtsi
index 77ae611b817a..9c822ca23130 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw552x.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw552x.dtsi
@@ -25,13 +25,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -45,21 +45,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -146,6 +146,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
@@ -260,7 +261,7 @@
 		pagesize = <16>;
 	};
 
-	rtc: ds1672@68 {
+	rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi
index e3b677384a22..552114a69f5b 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw553x.dtsi
@@ -24,13 +24,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -44,21 +44,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -142,6 +142,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
@@ -256,7 +257,7 @@
 		pagesize = <16>;
 	};
 
-	rtc: ds1672@68 {
+	rtc: rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi
index ce1d49a9e0cd..ea92b2b5c50d 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw560x.dtsi
@@ -50,13 +50,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -70,21 +70,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -254,6 +254,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi
index 50b484998c49..b518bcb6b7a9 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5903.dtsi
@@ -34,13 +34,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -54,21 +54,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -195,6 +195,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi
index 3125cd04d4ea..3df4d345da98 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5904.dtsi
@@ -36,13 +36,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -56,21 +56,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -260,6 +260,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5907.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5907.dtsi
index 955a51226eda..87fdc9e2a727 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5907.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5907.dtsi
@@ -24,13 +24,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -44,21 +44,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -156,6 +156,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
@@ -270,7 +271,7 @@
 		pagesize = <16>;
 	};
 
-	ds1672@68 {
+	rtc@68 {
 		compatible = "dallas,ds1672";
 		reg = <0x68>;
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5910.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5910.dtsi
index 453dee4d9227..099ed2f94d61 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5910.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5910.dtsi
@@ -27,13 +27,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -47,21 +47,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -165,6 +165,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5912.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5912.dtsi
index add700bc11cc..cbca5e58e812 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5912.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5912.dtsi
@@ -25,13 +25,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 0 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -45,21 +45,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5913.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5913.dtsi
index 82f47c295b08..4e4dce5adc15 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5913.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-gw5913.dtsi
@@ -24,13 +24,13 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		user-pb {
+		key-user-pb {
 			label = "user_pb";
 			gpios = <&gsc_gpio 2 GPIO_ACTIVE_LOW>;
 			linux,code = <BTN_0>;
 		};
 
-		user-pb1x {
+		key-user-pb1x {
 			label = "user_pb1x";
 			linux,code = <BTN_1>;
 			interrupt-parent = <&gsc>;
@@ -44,21 +44,21 @@
 			interrupts = <1>;
 		};
 
-		eeprom-wp {
+		key-eeprom-wp {
 			label = "eeprom_wp";
 			linux,code = <BTN_3>;
 			interrupt-parent = <&gsc>;
 			interrupts = <2>;
 		};
 
-		tamper {
+		key-tamper {
 			label = "tamper";
 			linux,code = <BTN_4>;
 			interrupt-parent = <&gsc>;
 			interrupts = <5>;
 		};
 
-		switch-hold {
+		key-switch-hold {
 			label = "switch_hold";
 			linux,code = <BTN_5>;
 			interrupt-parent = <&gsc>;
@@ -141,6 +141,7 @@
 		interrupts = <4 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
 		#interrupt-cells = <1>;
+		#address-cells = <1>;
 		#size-cells = <0>;
 
 		adc {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi
index 54d4bced2395..6b737360a532 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-hummingboard.dtsi
@@ -332,7 +332,6 @@
 };
 
 &pwm2 {
-	 pinctrl-names = "default";
 	 status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi
index 8ee65f9858c0..8d471450d5c5 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nit6xlite.dtsi
@@ -57,13 +57,13 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		home {
+		key-home {
 			label = "Home";
 			gpios = <&gpio7 13 IRQ_TYPE_LEVEL_LOW>;
 			linux,code = <102>;
 		};
 
-		back {
+		key-back {
 			label = "Back";
 			gpios = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>;
 			linux,code = <158>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi
index 43d474bbf55d..c727aac257f9 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_max.dtsi
@@ -86,45 +86,45 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			wakeup-source;
 		};
 
-		menu {
+		key-menu {
 			label = "Menu";
 			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_MENU>;
 		};
 
-		home {
+		key-home {
 			label = "Home";
 			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
 		};
 
-		back {
+		key-back {
 			label = "Back";
 			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_BACK>;
 		};
 
-		volume-up {
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
 		};
 
-		volume-down {
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
 		};
 	};
 
-	i2c2mux {
+	i2c-mux-2 {
 		compatible = "i2c-mux-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c2mux>;
@@ -148,7 +148,7 @@
 		};
 	};
 
-	i2c3mux {
+	i2c-mux-3 {
 		compatible = "i2c-mux-gpio";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_i2c3mux>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi
index 8e64314fa8b2..806af7f60419 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6_som2.dtsi
@@ -47,38 +47,38 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			wakeup-source;
 		};
 
-		menu {
+		key-menu {
 			label = "Menu";
 			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_MENU>;
 		};
 
-		home {
+		key-home {
 			label = "Home";
 			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
 		};
 
-		back {
+		key-back {
 			label = "Back";
 			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_BACK>;
 		};
 
-		volume-up {
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
 		};
 
-		volume-down {
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi
index 8a0bfc387a59..c71aa7498acf 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-nitrogen6x.dtsi
@@ -80,38 +80,38 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			wakeup-source;
 		};
 
-		menu {
+		key-menu {
 			label = "Menu";
 			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_MENU>;
 		};
 
-		home {
+		key-home {
 			label = "Home";
 			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
 		};
 
-		back {
+		key-back {
 			label = "Back";
 			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_BACK>;
 		};
 
-		volume-up {
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
 		};
 
-		volume-down {
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-eval-01.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-eval-01.dtsi
index 037b60197598..fc78acc9f5c5 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-eval-01.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira-peb-eval-01.dtsi
@@ -13,14 +13,14 @@
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 		status = "disabled";
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_WAKEUP>;
 			wakeup-source;
 		};
 
-		sleep {
+		key-sleep {
 			label = "Sleep Button";
 			gpios = <&gpio6 18 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_SLEEP>;
@@ -35,19 +35,19 @@
 
 		user-led1 {
 			gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
+			linux,default-trigger = "none";
 			default-state = "on";
 		};
 
 		user-led2 {
 			gpios = <&gpio7 0 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
+			linux,default-trigger = "none";
 			default-state = "on";
 		};
 
 		user-led3 {
 			gpios = <&gpio5 29 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
+			linux,default-trigger = "none";
 			default-state = "on";
 		};
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi
index 0b4c09b09c03..a3c2811e9c6f 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-phytec-mira.dtsi
@@ -162,7 +162,7 @@
 		interrupts = <12 IRQ_TYPE_NONE>;
 		status = "disabled";
 
-		stmpe_touchscreen {
+		touchscreen {
 			compatible = "st,stmpe-ts";
 			st,sample-time = <4>;
 			st,mod-12b = <1>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-rex.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-rex.dtsi
index 64ded5e5559c..22d5918ee4d8 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-rex.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-rex.dtsi
@@ -23,7 +23,6 @@
 
 	reg_usbh1_vbus: regulator-usbh1-vbus {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
 		regulator-name = "usbh1_vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
@@ -33,7 +32,6 @@
 
 	reg_usb_otg_vbus: regulator-otg-vbus {
 		compatible = "regulator-fixed";
-		pinctrl-names = "default";
 		regulator-name = "usb_otg_vbus";
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi
index 2587d17c5918..b9dde0af3b99 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabreauto.dtsi
@@ -32,35 +32,35 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		home {
+		key-home {
 			label = "Home";
 			gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
 			wakeup-source;
 		};
 
-		back {
+		key-back {
 			label = "Back";
 			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_BACK>;
 			wakeup-source;
 		};
 
-		program {
+		key-program {
 			label = "Program";
 			gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_PROGRAM>;
 			wakeup-source;
 		};
 
-		volume-up {
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio2 15 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
 			wakeup-source;
 		};
 
-		volume-down {
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&gpio5 14 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi
index bdef7e642d3c..f7abc17c7c93 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabrelite.dtsi
@@ -108,38 +108,38 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio2 3 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
 			wakeup-source;
 		};
 
-		menu {
+		key-menu {
 			label = "Menu";
 			gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_MENU>;
 		};
 
-		home {
+		key-home {
 			label = "Home";
 			gpios = <&gpio2 4 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_HOME>;
 		};
 
-		back {
+		key-back {
 			label = "Back";
 			gpios = <&gpio2 2 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_BACK>;
 		};
 
-		volume-up {
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio7 13 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
 		};
 
-		volume-down {
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&gpio4 5 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi
index 960e83f5e904..e8368c6b27ef 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-sabresd.dtsi
@@ -71,21 +71,21 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio3 29 GPIO_ACTIVE_LOW>;
 			wakeup-source;
 			linux,code = <KEY_POWER>;
 		};
 
-		volume-up {
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 			wakeup-source;
 			linux,code = <KEY_VOLUMEUP>;
 		};
 
-		volume-down {
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
 			wakeup-source;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-savageboard.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-savageboard.dtsi
index 6823a639ed2f..2daf2b6af884 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-savageboard.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-savageboard.dtsi
@@ -58,7 +58,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		power {
+		key-power {
 			gpios = <&gpio3 7 GPIO_ACTIVE_LOW>;
 			label = "Power Button";
 			linux,code = <KEY_POWER>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-ts7970.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-ts7970.dtsi
index 11c70431feec..17f6a568f0e8 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-ts7970.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-ts7970.dtsi
@@ -213,12 +213,12 @@
 	status = "okay";
 
 	m41t00s: rtc@68 {
-		compatible = "m41t00";
+		compatible = "st,m41t00";
 		reg = <0x68>;
 	};
 
 	isl12022: rtc@6f {
-		compatible = "isl,isl12022";
+		compatible = "isil,isl12022";
 		reg = <0x6f>;
 	};
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi
index 2bb5b762c984..57297d6521cf 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-tx6.dtsi
@@ -44,7 +44,7 @@
 	gpio-keys {
 		compatible = "gpio-keys";
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio5 2 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_POWER>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6qdl-vicut1.dtsi b/arch/arm/boot/dts/nxp/imx/imx6qdl-vicut1.dtsi
index 96e4f4b0b248..de2b12dad7d8 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6qdl-vicut1.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6qdl-vicut1.dtsi
@@ -429,7 +429,6 @@
 };
 
 &usbh1 {
-	pinctrl-names = "default";
 	phy_type = "utmi";
 	dr_mode = "host";
 	disable-over-current;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts
index 56040da0bd25..b6c336e3079e 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6sl-tolino-shine2hd.dts
@@ -84,7 +84,7 @@
 		led-1 {
 			label = "tolinoshine2hd:white:backlightboost";
 			gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "off";
+			linux,default-trigger = "none";
 		};
 	};
 
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi
index 8c5ca4f9b87f..704870e8c10c 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6sll.dtsi
@@ -309,7 +309,7 @@
 					reg = <0x02034000 0x4000>;
 					interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
 					dmas = <&sdma 29 4 0>, <&sdma 30 4 0>;
-					dma-name = "rx", "tx";
+					dma-names = "rx", "tx";
 					clocks = <&clks IMX6SLL_CLK_UART3_IPG>,
 						 <&clks IMX6SLL_CLK_UART3_SERIAL>;
 					clock-names = "ipg", "per";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi
index 67cf09e63a63..c7aeb99d8f00 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6sx-sdb.dtsi
@@ -33,14 +33,14 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
-		volume-up {
+		key-volume-up {
 			label = "Volume Up";
 			gpios = <&gpio1 18 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEUP>;
 			wakeup-source;
 		};
 
-		volume-down {
+		key-volume-down {
 			label = "Volume Down";
 			gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_VOLUMEDOWN>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi
index 911ccbd132cf..73c9cfbdba62 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-14x14-evk.dtsi
@@ -22,6 +22,26 @@
 		status = "okay";
 	};
 
+	reg_1v5: regulator-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_2v8: regulator-2v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "2v8";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+	};
 
 	reg_sd1_vmmc: regulator-sd1-vmmc {
 		compatible = "regulator-fixed";
@@ -182,6 +202,9 @@
 		clock-names = "xclk";
 		powerdown-gpios = <&gpio_spi 6 GPIO_ACTIVE_HIGH>;
 		reset-gpios = <&gpio_spi 5 GPIO_ACTIVE_LOW>;
+		AVDD-supply = <&reg_2v8>;
+		DVDD-supply = <&reg_1v5>;
+		DOVDD-supply = <&reg_1v8>;
 
 		port {
 			ov5640_to_parallel: endpoint {
@@ -421,8 +444,6 @@
 };
 
 &iomuxc {
-	pinctrl-names = "default";
-
 	pinctrl_camera_clock: cameraclockgrp {
 		fsl,pins = <
 			MX6UL_PAD_CSI_MCLK__CSI_MCLK		0x1b088
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-av-02.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-av-02.dtsi
index ec042648bd98..c6064f4c679b 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-av-02.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-av-02.dtsi
@@ -61,7 +61,7 @@
 		wakeup-source;
 		status = "disabled";
 
-		stmpe_touchscreen {
+		touchscreen {
 			compatible = "st,stmpe-ts";
 			st,sample-time = <4>;
 			st,mod-12b = <1>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-eval-01.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-eval-01.dtsi
index 2f3fd32a1167..113485e3397a 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-eval-01.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-phytec-segin-peb-eval-01.dtsi
@@ -8,12 +8,12 @@
 
 / {
 	gpio_keys: gpio-keys {
-		compatible = "gpio-key";
+		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 		status = "disabled";
 
-		power {
+		key-power {
 			label = "Power Button";
 			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
 			linux,code = <KEY_POWER>;
@@ -29,13 +29,13 @@
 
 		user-led1 {
 			gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
+			linux,default-trigger = "none";
 			default-state = "on";
 		};
 
 		user-led2 {
 			gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "gpio";
+			linux,default-trigger = "none";
 			default-state = "on";
 		};
 	};
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi
index fe307f49b9e5..9fa5225994e3 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-pico.dtsi
@@ -76,6 +76,7 @@
 	panel {
 		compatible = "vxt,vl050-8048nt-c01";
 		backlight = <&backlight>;
+		power-supply = <&reg_3p3v>;
 
 		port {
 			panel_in: endpoint {
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi
index f053358bc931..1992dfb53b45 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ul-tx6ul.dtsi
@@ -72,7 +72,7 @@
 		default-brightness-level = <50>;
 	};
 
-	i2c_gpio: i2c-gpio {
+	i2c_gpio: i2c {
 		compatible = "i2c-gpio";
 		#address-cells = <1>;
 		#size-cells = <0>;
@@ -246,7 +246,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet1 &pinctrl_enet1_mdio &pinctrl_etnphy0_rst>;
 	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
 	phy-supply = <&reg_3v3_etn>;
 	phy-handle = <&etnphy0>;
 	status = "okay";
@@ -262,6 +261,11 @@
 			pinctrl-0 = <&pinctrl_etnphy0_int>;
 			interrupt-parent = <&gpio5>;
 			interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <100>;
+			reset-deassert-us = <25000>;
+			/* Energy detect sometimes causes link failures */
+			smsc,disable-energy-detect;
 			status = "okay";
 		};
 
@@ -272,6 +276,9 @@
 			pinctrl-0 = <&pinctrl_etnphy1_int>;
 			interrupt-parent = <&gpio4>;
 			interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <100>;
+			reset-deassert-us = <25000>;
 			status = "okay";
 		};
 	};
@@ -281,7 +288,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet2 &pinctrl_etnphy1_rst>;
 	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio4 28 GPIO_ACTIVE_LOW>;
 	phy-supply = <&reg_3v3_etn>;
 	phy-handle = <&etnphy1>;
 	status = "disabled";
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-aster.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-aster.dtsi
index de4dc7c1a03a..e75dad0f0e23 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-aster.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-aster.dtsi
@@ -13,7 +13,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_snvs_gpiokeys>;
 
-		power {
+		key-power {
 			label = "Wake-Up";
 			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dtsi
index f52f8b5ad8a6..bce6fbf230b3 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-colibri-iris.dtsi
@@ -13,7 +13,7 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_snvs_gpiokeys>;
 
-		power {
+		key-power {
 			label = "Wake-Up";
 			gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_WAKEUP>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-rmm.dts b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-rmm.dts
index 5d1cc8a1f555..107b00b9a939 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-rmm.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-engicam-microgea-rmm.dts
@@ -129,7 +129,7 @@
 	status = "okay";
 
 	touchscreen: touchscreen@38 {
-		compatible ="edt,edt-ft5306";
+		compatible = "edt,edt-ft5306";
 		reg = <0x38>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_touchscreen>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi
index d12fb44aeb14..7ee25b141627 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/imx6ull-phytec-tauri.dtsi
@@ -15,7 +15,7 @@
 	};
 
 	gpio_keys: gpio-keys {
-		compatible = "gpio-key";
+		compatible = "gpio-keys";
 		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_gpio_keys>;
 
@@ -79,13 +79,13 @@
 		user-led1 {
 			label = "yellow";
 			gpios = <&gpio1 3 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "off";
+			linux,default-trigger = "none";
 		};
 
 		user-led2 {
 			label = "red";
 			gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "off";
+			linux,default-trigger = "none";
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts b/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts
index 6159ed70d966..2d9f495660c9 100644
--- a/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx6ulz-bsh-smm-m2.dts
@@ -33,6 +33,10 @@
 	status = "okay";
 };
 
+&uart2 {
+	status = "okay";
+};
+
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
diff --git a/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts b/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts
index 7ee66be8bccb..7acd28658e6f 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7d-nitrogen7.dts
@@ -270,7 +270,7 @@
 	pinctrl-0 = <&pinctrl_i2c3>;
 	status = "okay";
 
-	touch@48 {
+	touchscreen@48 {
 		compatible = "ti,tsc2004";
 		reg = <0x48>;
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts b/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts
index f2cd95e992e7..56dedd4fb8f0 100644
--- a/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts
+++ b/arch/arm/boot/dts/nxp/imx/imx7s-warp.dts
@@ -23,7 +23,7 @@
 		pinctrl-0 = <&pinctrl_gpio>;
 		autorepeat;
 
-		back {
+		key-back {
 			label = "Back";
 			gpios = <&gpio7 1 GPIO_ACTIVE_HIGH>;
 			linux,code = <KEY_BACK>;
diff --git a/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi b/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi
index 67a3d484bc9f..65fde4f52587 100644
--- a/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi
+++ b/arch/arm/boot/dts/nxp/imx/mba6ulx.dtsi
@@ -146,6 +146,13 @@
 		ssi-controller = <&sai1>;
 		audio-codec = <&tlv320aic32x4>;
 		audio-asrc = <&asrc>;
+		audio-routing =
+			"IN3_L", "Mic Jack",
+			"Mic Jack", "Mic Bias",
+			"IN1_L", "Line In Jack",
+			"IN1_R", "Line In Jack",
+			"Line Out Jack", "LOL",
+			"Line Out Jack", "LOR";
 	};
 };
 
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi
index 6dd73290f0c6..152e98cf0c4e 100644
--- a/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi
+++ b/arch/arm/boot/dts/nxp/lpc/lpc18xx.dtsi
@@ -100,23 +100,25 @@
 			memcpy-bus-width = <32>;
 		};
 
-		spifi: flash-controller@40003000 {
+		spifi: spi@40003000 {
 			compatible = "nxp,lpc1773-spifi";
 			reg = <0x40003000 0x1000>, <0x14000000 0x4000000>;
 			reg-names = "spifi", "flash";
 			interrupts = <30>;
 			clocks = <&ccu1 CLK_SPIFI>, <&ccu1 CLK_CPU_SPIFI>;
 			clock-names = "spifi", "reg";
+			#address-cells = <1>;
+			#size-cells = <0>;
 			resets = <&rgu 53>;
 			status = "disabled";
 		};
 
-		mmcsd: mmcsd@40004000 {
+		mmcsd: mmc@40004000 {
 			compatible = "snps,dw-mshc";
 			reg = <0x40004000 0x1000>;
 			interrupts = <6>;
-			clocks = <&ccu2 CLK_SDIO>, <&ccu1 CLK_CPU_SDIO>;
-			clock-names = "ciu", "biu";
+			clocks = <&ccu1 CLK_CPU_SDIO>, <&ccu2 CLK_SDIO>;
+			clock-names = "biu", "ciu";
 			resets = <&rgu 20>;
 			status = "disabled";
 		};
@@ -535,3 +537,7 @@
 		};
 	};
 };
+
+&nvic {
+	arm,num-irq-priority-bits = <3>;
+};
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi
index 6cf405e9b082..2236901a0031 100644
--- a/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi
+++ b/arch/arm/boot/dts/nxp/lpc/lpc32xx.dtsi
@@ -77,12 +77,13 @@
 			status = "disabled";
 		};
 
-		dma: dma@31000000 {
+		dma: dma-controller@31000000 {
 			compatible = "arm,pl080", "arm,primecell";
 			reg = <0x31000000 0x1000>;
 			interrupts = <28 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clk LPC32XX_CLK_DMA>;
 			clock-names = "apb_pclk";
+			#dma-cells = <2>;
 		};
 
 		usb {
@@ -224,8 +225,8 @@
 				status = "disabled";
 			};
 
-			sd: sd@20098000 {
-				compatible = "arm,pl18x", "arm,primecell";
+			sd: mmc@20098000 {
+				compatible = "arm,pl180", "arm,primecell";
 				reg = <0x20098000 0x1000>;
 				interrupts = <15 IRQ_TYPE_LEVEL_HIGH>,
 					     <13 IRQ_TYPE_LEVEL_HIGH>;
@@ -298,11 +299,11 @@
 				clocks = <&clk LPC32XX_CLK_I2C2>;
 			};
 
-			mpwm: mpwm@400e8000 {
+			mpwm: pwm@400e8000 {
 				compatible = "nxp,lpc3220-motor-pwm";
 				reg = <0x400e8000 0x78>;
+				#pwm-cells = <3>;
 				status = "disabled";
-				#pwm-cells = <2>;
 			};
 		};
 
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dts b/arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dts
index beddaba85393..5ff43c825944 100644
--- a/arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dts
+++ b/arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dts
@@ -108,14 +108,14 @@
 	};
 
 	ssp_pins: ssp-pins {
-		ssp1_cs {
+		ssp1_cs_cfg {
 			pins = "p6_7";
 			function = "gpio";
 			bias-pull-up;
 			bias-disable;
 		};
 
-		ssp1_miso_mosi {
+		ssp1_miso_mosi_cfg {
 			pins = "p1_3", "p1_4";
 			function = "ssp1";
 			slew-rate = <1>;
@@ -124,7 +124,7 @@
 			input-schmitt-disable;
 		};
 
-		ssp1_sck {
+		ssp1_sck_cfg {
 			pins = "pf_4";
 			function = "ssp1";
 			slew-rate = <1>;
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dts b/arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dts
index 93d0c2e99e7c..18f757c56905 100644
--- a/arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dts
+++ b/arch/arm/boot/dts/nxp/lpc/lpc4350-hitex-eval.dts
@@ -43,50 +43,50 @@
 		poll-interval = <100>;
 		autorepeat;
 
-		button0 {
+		button-0 {
 			label = "joy:right";
 			linux,code = <KEY_RIGHT>;
 			gpios = <&pca_gpio 8 GPIO_ACTIVE_LOW>;
 		};
 
-		button1 {
+		button-1 {
 			label = "joy:up";
 			linux,code = <KEY_UP>;
 			gpios = <&pca_gpio 9 GPIO_ACTIVE_LOW>;
 		};
 
 
-		button2 {
+		button-2 {
 			label = "joy:enter";
 			linux,code = <KEY_ENTER>;
 			gpios = <&pca_gpio 10 GPIO_ACTIVE_LOW>;
 		};
 
-		button3 {
+		button-3 {
 			label = "joy:left";
 			linux,code = <KEY_LEFT>;
 			gpios = <&pca_gpio 11 GPIO_ACTIVE_LOW>;
 		};
 
-		button4 {
+		button-4 {
 			label = "joy:down";
 			linux,code = <KEY_DOWN>;
 			gpios = <&pca_gpio 12 GPIO_ACTIVE_LOW>;
 		};
 
-		button5 {
+		button-5 {
 			label = "user:sw3";
 			linux,code = <KEY_F1>;
 			gpios = <&pca_gpio 13 GPIO_ACTIVE_LOW>;
 		};
 
-		button6 {
+		button-6 {
 			label = "user:sw4";
 			linux,code = <KEY_F2>;
 			gpios = <&pca_gpio 14 GPIO_ACTIVE_LOW>;
 		};
 
-		button7 {
+		button-7 {
 			label = "user:sw5";
 			linux,code = <KEY_F3>;
 			gpios = <&pca_gpio 15 GPIO_ACTIVE_LOW>;
@@ -406,6 +406,9 @@
 		ext_sram: sram@2,0 {
 			compatible = "mmio-sram";
 			reg = <2 0 0x80000>; /* 512 KiB SRAM on IS62WV25616 */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 2 0 0x80000>;
 		};
 	};
 };
@@ -451,8 +454,9 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&spifi_pins>;
 
-	flash {
+	flash@0 {
 		compatible = "jedec,spi-nor";
+		reg = <0>;
 		spi-rx-bus-width = <4>;
 		#address-cells = <1>;
 		#size-cells = <1>;
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4350.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc4350.dtsi
index c4422f587055..707d22a219d8 100644
--- a/arch/arm/boot/dts/nxp/lpc/lpc4350.dtsi
+++ b/arch/arm/boot/dts/nxp/lpc/lpc4350.dtsi
@@ -24,16 +24,25 @@
 		sram0: sram@10000000 {
 			compatible = "mmio-sram";
 			reg = <0x10000000 0x20000>; /* 96 + 32 KiB local SRAM */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
 		};
 
 		sram1: sram@10080000 {
 			compatible = "mmio-sram";
 			reg = <0x10080000 0x12000>; /* 64 + 8 KiB local SRAM */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
 		};
 
 		sram2: sram@20000000 {
 			compatible = "mmio-sram";
 			reg = <0x20000000 0x10000>; /* 4 x 16 KiB AHB SRAM */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts b/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts
index 4aefbc01dfc0..7ccb4c2ca571 100644
--- a/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts
+++ b/arch/arm/boot/dts/nxp/lpc/lpc4357-ea4357-devkit.dts
@@ -60,31 +60,31 @@
 		poll-interval = <100>;
 		autorepeat;
 
-		button0 {
+		button-0 {
 			label = "joy_enter";
 			linux,code = <KEY_ENTER>;
 			gpios = <&gpio LPC_GPIO(4,8) GPIO_ACTIVE_LOW>;
 		};
 
-		button1 {
+		button-1 {
 			label = "joy_left";
 			linux,code = <KEY_LEFT>;
 			gpios = <&gpio LPC_GPIO(4,9) GPIO_ACTIVE_LOW>;
 		};
 
-		button2 {
+		button-2 {
 			label = "joy_up";
 			linux,code = <KEY_UP>;
 			gpios = <&gpio LPC_GPIO(4,10) GPIO_ACTIVE_LOW>;
 		};
 
-		button3 {
+		button-3 {
 			label = "joy_right";
 			linux,code = <KEY_RIGHT>;
 			gpios = <&gpio LPC_GPIO(4,12) GPIO_ACTIVE_LOW>;
 		};
 
-		button4 {
+		button-4 {
 			label = "joy_down";
 			linux,code = <KEY_DOWN>;
 			gpios = <&gpio LPC_GPIO(4,13) GPIO_ACTIVE_LOW>;
@@ -403,7 +403,7 @@
 	};
 
 	ssp0_pins: ssp0-pins {
-		ssp0_sck_miso_mosi {
+		ssp0_sck_miso_mosi_cfg {
 			pins = "pf_0", "pf_2", "pf_3";
 			function = "ssp0";
 			slew-rate = <1>;
@@ -412,7 +412,7 @@
 			input-schmitt-disable;
 		};
 
-		ssp0_ssel {
+		ssp0_ssel_cfg {
 			pins = "pf_1";
 			function = "ssp0";
 			bias-pull-up;
@@ -452,12 +452,12 @@
 	};
 
 	usb0_pins: usb0-pins {
-		usb0_pwr_enable {
+		usb0_pwr_enable_cfg {
 			pins = "p2_3";
 			function = "usb0";
 		};
 
-		usb0_pwr_fault {
+		usb0_pwr_fault_cfg {
 			pins = "p8_0";
 			function = "usb0";
 			bias-disable;
@@ -582,8 +582,9 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&spifi_pins>;
 
-	flash {
+	flash@0 {
 		compatible = "jedec,spi-nor";
+		reg = <0>;
 		spi-cpol;
 		spi-cpha;
 		spi-rx-bus-width = <4>;
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts b/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts
index 846afb8ccbf1..d18f2b2caf68 100644
--- a/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts
+++ b/arch/arm/boot/dts/nxp/lpc/lpc4357-myd-lpc4357.dts
@@ -63,6 +63,7 @@
 
 	panel: panel {
 		compatible = "innolux,at070tn92";
+		power-supply = <&vcc>;
 
 		port {
 			panel_input: endpoint {
@@ -543,7 +544,7 @@
 	pinctrl-0 = <&enet_rmii_pins>;
 	phy-handle = <&phy1>;
 
-	mdio0 {
+	mdio {
 		#address-cells = <1>;
 		#size-cells = <0>;
 		compatible = "snps,dwmac-mdio";
@@ -569,8 +570,9 @@
 	pinctrl-0 = <&spifi_pins>;
 
 	/* Atmel AT25DF321A */
-	flash {
+	flash@0 {
 		compatible = "jedec,spi-nor";
+		reg = <0>;
 		spi-max-frequency = <51000000>;
 		spi-cpol;
 		spi-cpha;
diff --git a/arch/arm/boot/dts/nxp/lpc/lpc4357.dtsi b/arch/arm/boot/dts/nxp/lpc/lpc4357.dtsi
index 72f12db8d53a..d138ee7869ff 100644
--- a/arch/arm/boot/dts/nxp/lpc/lpc4357.dtsi
+++ b/arch/arm/boot/dts/nxp/lpc/lpc4357.dtsi
@@ -24,16 +24,25 @@
 		sram0: sram@10000000 {
 			compatible = "mmio-sram";
 			reg = <0x10000000 0x8000>; /* 32 KiB local SRAM */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
 		};
 
 		sram1: sram@10080000 {
 			compatible = "mmio-sram";
 			reg = <0x10080000 0xa000>; /* 32 + 8 KiB local SRAM */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
 		};
 
 		sram2: sram@20000000 {
 			compatible = "mmio-sram";
 			reg = <0x20000000 0x10000>; /* 4 x 16 KiB AHB SRAM */
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
 		};
 	};
 };
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-qds.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-qds.dts
index f1acb97aee69..a880875ced83 100644
--- a/arch/arm/boot/dts/nxp/ls/ls1021a-qds.dts
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-qds.dts
@@ -66,7 +66,7 @@
 	bus-num = <0>;
 	status = "okay";
 
-	dspiflash: at45db021d@0 {
+	dspiflash: flash@0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "atmel,at45db021d", "atmel,at45", "atmel,dataflash";
@@ -187,7 +187,7 @@
 		 <0x3 0x0 0x0 0x7fb00000 0x00000100>;
 	status = "okay";
 
-	nor@0,0 {
+	flash@0,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "cfi-flash";
@@ -211,8 +211,8 @@
 		device-width = <1>;
 		ranges = <0 3 0 0x100>;
 
-		mdio-mux-emi1 {
-			compatible = "mdio-mux-mmioreg";
+		mdio-mux@54 {
+			compatible = "mdio-mux-mmioreg", "mdio-mux";
 			mdio-parent-bus = <&mdio0>;
 			#address-cells = <1>;
 			#size-cells = <0>;
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtso b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtso
index 146d45601f69..66cedc2dcd96 100644
--- a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtso
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-dc44.dtso
@@ -36,7 +36,7 @@
 	#size-cells = <0>;
 
 	polytouch: touchscreen@38 {
-		compatible = "edt,edt-ft5406", "edt,edt-ft5x06";
+		compatible = "edt,edt-ft5406";
 		reg = <0x38>;
 		interrupt-parent = <&pca9554_0>;
 		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtso b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtso
index db66831f31af..8b9455bffbd2 100644
--- a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtso
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a-mbls1021a-rgb-cdtech-fc21.dtso
@@ -36,7 +36,7 @@
 	#size-cells = <0>;
 
 	polytouch: touchscreen@38 {
-		compatible = "edt,edt-ft5406", "edt,edt-ft5x06";
+		compatible = "edt,edt-ft5406";
 		reg = <0x38>;
 		interrupt-parent = <&pca9554_0>;
 		interrupts = <6 IRQ_TYPE_EDGE_FALLING>;
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi
index 271001eb5ad7..167559521ae1 100644
--- a/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tqmls1021a.dtsi
@@ -66,8 +66,6 @@
 
 	qflash0: flash@0 {
 		compatible = "jedec,spi-nor";
-		#address-cells = <1>;
-		#size-cells = <1>;
 		spi-max-frequency = <20000000>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <4>;
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-tsn.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-tsn.dts
index 1ea32fff4120..da76566f3510 100644
--- a/arch/arm/boot/dts/nxp/ls/ls1021a-tsn.dts
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-tsn.dts
@@ -40,8 +40,6 @@
 	/* ADG704BRMZ 1:4 SPI mux/demux */
 	sja1105: ethernet-switch@1 {
 		reg = <0x1>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 		compatible = "nxp,sja1105t";
 		/* 12 MHz */
 		spi-max-frequency = <12000000>;
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a-twr.dts b/arch/arm/boot/dts/nxp/ls/ls1021a-twr.dts
index f5c03871b205..38281b904301 100644
--- a/arch/arm/boot/dts/nxp/ls/ls1021a-twr.dts
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a-twr.dts
@@ -151,7 +151,7 @@
 	ranges = <0x0 0x0 0x0 0x60000000 0x08000000>;
 	status = "okay";
 
-	nor@0,0 {
+	flash@0,0 {
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "cfi-flash";
diff --git a/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi b/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi
index e86998ca77d6..e0b9ea6dd510 100644
--- a/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi
+++ b/arch/arm/boot/dts/nxp/ls/ls1021a.dtsi
@@ -93,10 +93,9 @@
 			compatible = "fsl,qoriq-memory-controller";
 			reg = <0x0 0x1080000 0x0 0x1000>;
 			interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>;
-			big-endian;
 		};
 
-		gic: interrupt-controller@1400000 {
+		gic: interrupt-controller@1401000 {
 			compatible = "arm,gic-400", "arm,cortex-a7-gic";
 			#interrupt-cells = <3>;
 			interrupt-controller;
@@ -155,14 +154,13 @@
 			status = "disabled";
 		};
 
-		esdhc: esdhc@1560000 {
+		esdhc: mmc@1560000 {
 			compatible = "fsl,ls1021a-esdhc", "fsl,esdhc";
 			reg = <0x0 0x1560000 0x0 0x10000>;
 			interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
 			clock-frequency = <0>;
 			voltage-ranges = <1800 1800 3300 3300>;
 			sdhci,auto-cmd12;
-			big-endian;
 			bus-width = <4>;
 			status = "disabled";
 		};
@@ -611,11 +609,10 @@
 		};
 
 		wdog0: watchdog@2ad0000 {
-			compatible = "fsl,imx21-wdt";
+			compatible = "fsl,ls1021a-wdt", "fsl,imx21-wdt";
 			reg = <0x0 0x2ad0000 0x0 0x10000>;
 			interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&clockgen 4 1>;
-			clock-names = "wdog-en";
 			big-endian;
 		};
 
@@ -627,9 +624,9 @@
 			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
 				 <&clockgen 4 1>, <&clockgen 4 1>;
 			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 47>,
-			       <&edma0 1 46>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 46>,
+			       <&edma0 1 47>;
 			status = "disabled";
 		};
 
@@ -641,9 +638,9 @@
 			clocks = <&clockgen 4 1>, <&clockgen 4 1>,
 				 <&clockgen 4 1>, <&clockgen 4 1>;
 			clock-names = "bus", "mclk1", "mclk2", "mclk3";
-			dma-names = "tx", "rx";
-			dmas = <&edma0 1 45>,
-			       <&edma0 1 44>;
+			dma-names = "rx", "tx";
+			dmas = <&edma0 1 44>,
+			       <&edma0 1 45>;
 			status = "disabled";
 		};
 
@@ -707,6 +704,7 @@
 
 		enet0: ethernet@2d10000 {
 			compatible = "fsl,etsec2";
+			reg = <0x0 0x2d10000 0x0 0x5000>;
 			device_type = "network";
 			#address-cells = <2>;
 			#size-cells = <2>;
@@ -717,8 +715,6 @@
 			dma-coherent;
 
 			queue-group@2d10000 {
-				#address-cells = <2>;
-				#size-cells = <2>;
 				reg = <0x0 0x2d10000 0x0 0x1000>;
 				interrupts = <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
@@ -726,8 +722,6 @@
 			};
 
 			queue-group@2d14000  {
-				#address-cells = <2>;
-				#size-cells = <2>;
 				reg = <0x0 0x2d14000 0x0 0x1000>;
 				interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
@@ -737,6 +731,7 @@
 
 		enet1: ethernet@2d50000 {
 			compatible = "fsl,etsec2";
+			reg = <0x0 0x2d50000 0x0 0x5000>;
 			device_type = "network";
 			#address-cells = <2>;
 			#size-cells = <2>;
@@ -746,8 +741,6 @@
 			dma-coherent;
 
 			queue-group@2d50000  {
-				#address-cells = <2>;
-				#size-cells = <2>;
 				reg = <0x0 0x2d50000 0x0 0x1000>;
 				interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
@@ -755,8 +748,6 @@
 			};
 
 			queue-group@2d54000  {
-				#address-cells = <2>;
-				#size-cells = <2>;
 				reg = <0x0 0x2d54000 0x0 0x1000>;
 				interrupts = <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
@@ -766,6 +757,7 @@
 
 		enet2: ethernet@2d90000 {
 			compatible = "fsl,etsec2";
+			reg = <0x0 0x2d90000 0x0 0x5000>;
 			device_type = "network";
 			#address-cells = <2>;
 			#size-cells = <2>;
@@ -775,8 +767,6 @@
 			dma-coherent;
 
 			queue-group@2d90000  {
-				#address-cells = <2>;
-				#size-cells = <2>;
 				reg = <0x0 0x2d90000 0x0 0x1000>;
 				interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
@@ -784,8 +774,6 @@
 			};
 
 			queue-group@2d94000  {
-				#address-cells = <2>;
-				#size-cells = <2>;
 				reg = <0x0 0x2d94000 0x0 0x1000>;
 				interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
 					<GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
@@ -810,7 +798,6 @@
 			snps,dis_rxdet_inp3_quirk;
 			usb3-lpm-capable;
 			snps,incr-burst-type-adjustment = <1>, <4>, <8>, <16>;
-			snps,host-vbus-glitches;
 		};
 
 		pcie@3400000 {
@@ -917,7 +904,7 @@
 			ranges = <0x0 0x0 0x10010000 0x10000>;
 		};
 
-		qdma: dma-controller@8390000 {
+		qdma: dma-controller@8388000 {
 			compatible = "fsl,ls1021a-qdma";
 			reg = <0x0 0x8388000 0x0 0x1000>, /* Controller regs */
 			      <0x0 0x8389000 0x0 0x1000>, /* Status regs */
@@ -937,17 +924,15 @@
 			big-endian;
 		};
 
-		rcpm: power-controller@1ee2140 {
+		rcpm: wakeup-controller@1ee2140 {
 			compatible = "fsl,ls1021a-rcpm", "fsl,qoriq-rcpm-2.1+";
 			reg = <0x0 0x1ee2140 0x0 0x8>;
 			#fsl,rcpm-wakeup-cells = <2>;
-			#power-domain-cells = <0>;
 		};
 
-		ftm_alarm0: timer0@29d0000 {
+		ftm_alarm0: rtc@29d0000 {
 			compatible = "fsl,ls1021a-ftm-alarm";
 			reg = <0x0 0x29d0000 0x0 0x10000>;
-			reg-names = "ftm";
 			fsl,rcpm-wakeup = <&rcpm 0x0 0x20000000>;
 			interrupts = <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>;
 			big-endian;
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
index 029f49be40e3..be6147239362 100644
--- a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev-rev-b.dts
@@ -412,13 +412,13 @@
 };
 
 &iomuxc {
-	pinctrl_gpio_e6185_eeprom_sel: pinctrl-gpio-e6185-eeprom-spi0 {
+	pinctrl_gpio_e6185_eeprom_sel: pinctrl-gpio-e6185-eeprom-spi0-grp {
 		fsl,pins = <
 			VF610_PAD_PTE27__GPIO_132	0x33e2
 		>;
 	};
 
-	pinctrl_gpio_spi0: pinctrl-gpio-spi0 {
+	pinctrl_gpio_spi0: pinctrl-gpio-spi0-grp {
 		fsl,pins = <
 			VF610_PAD_PTB22__GPIO_44	0x33e2
 			VF610_PAD_PTB21__GPIO_43	0x33e2
@@ -428,7 +428,7 @@
 		>;
 	};
 
-	pinctrl_mdio_mux: pinctrl-mdio-mux {
+	pinctrl_mdio_mux: pinctrl-mdio-mux-grp {
 		fsl,pins = <
 			VF610_PAD_PTA18__GPIO_8		0x31c2
 			VF610_PAD_PTA19__GPIO_9		0x31c2
@@ -437,7 +437,7 @@
 		>;
 	};
 
-	pinctrl_pca9554_22: pinctrl-pca95540-22 {
+	pinctrl_pca9554_22: pinctrl-pca95540-22-grp {
 		fsl,pins = <
 			VF610_PAD_PTB28__GPIO_98	0x219d
 		>;
diff --git a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev.dtsi b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev.dtsi
index ce5e52896b19..91cc496ffb90 100644
--- a/arch/arm/boot/dts/nxp/vf/vf610-zii-dev.dtsi
+++ b/arch/arm/boot/dts/nxp/vf/vf610-zii-dev.dtsi
@@ -335,7 +335,7 @@
 		>;
 	};
 
-	pinctrl_gpio_spi0: pinctrl-gpio-spi0 {
+	pinctrl_gpio_spi0: pinctrl-gpio-spi0-grp {
 		fsl,pins = <
 			VF610_PAD_PTB22__GPIO_44	0x33e2
 			VF610_PAD_PTB21__GPIO_43	0x33e2
@@ -345,19 +345,19 @@
 		>;
 	};
 
-	pinctrl_gpio_switch0: pinctrl-gpio-switch0 {
+	pinctrl_gpio_switch0: pinctrl-gpio-switch0-grp {
 		fsl,pins = <
 			VF610_PAD_PTB5__GPIO_27		0x219d
 		>;
 	};
 
-	pinctrl_gpio_switch1: pinctrl-gpio-switch1 {
+	pinctrl_gpio_switch1: pinctrl-gpio-switch1-grp {
 		fsl,pins = <
 			VF610_PAD_PTB4__GPIO_26		0x219d
 		>;
 	};
 
-	pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset {
+	pinctrl_i2c_mux_reset: pinctrl-i2c-mux-reset-grp {
 		fsl,pins = <
 			 VF610_PAD_PTE14__GPIO_119	0x31c2
 			 >;
@@ -370,7 +370,7 @@
 		>;
 	};
 
-	pinctrl_i2c0_gpio: i2c0grp-gpio {
+	pinctrl_i2c0_gpio: i2c0-gpio-grp {
 		fsl,pins = <
 			VF610_PAD_PTB14__GPIO_36	0x31c2
 			VF610_PAD_PTB15__GPIO_37	0x31c2
@@ -392,7 +392,7 @@
 		>;
 	};
 
-	pinctrl_leds_debug: pinctrl-leds-debug {
+	pinctrl_leds_debug: pinctrl-leds-debug-grp {
 		fsl,pins = <
 			 VF610_PAD_PTD20__GPIO_74	0x31c2
 			 >;
@@ -436,7 +436,7 @@
 		>;
 	};
 
-	pinctrl_usb_vbus: pinctrl-usb-vbus {
+	pinctrl_usb_vbus: pinctrl-usb-vbus-grp {
 		fsl,pins = <
 			VF610_PAD_PTA16__GPIO_6	0x31c2
 		>;
diff --git a/arch/arm/boot/dts/nxp/vf/vf610m4.dtsi b/arch/arm/boot/dts/nxp/vf/vf610m4.dtsi
index 2bb331a87721..648d219e1d0e 100644
--- a/arch/arm/boot/dts/nxp/vf/vf610m4.dtsi
+++ b/arch/arm/boot/dts/nxp/vf/vf610m4.dtsi
@@ -55,3 +55,7 @@
 &mscm_ir {
 	interrupt-parent = <&nvic>;
 };
+
+&nvic {
+	arm,num-irq-priority-bits = <4>;
+};
diff --git a/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi b/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi
index 124003c0be26..568d81807c81 100644
--- a/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi
+++ b/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi
@@ -304,7 +304,7 @@
 				status = "disabled";
 			};
 
-			iomuxc: iomuxc@40048000 {
+			iomuxc: pinctrl@40048000 {
 				compatible = "fsl,vf610-iomuxc";
 				reg = <0x40048000 0x1000>;
 			};
@@ -682,7 +682,7 @@
 				status = "disabled";
 			};
 
-			nfc: nand@400e0000 {
+			nfc: nand-controller@400e0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,vf610-nfc";
diff --git a/arch/arm/boot/dts/qcom/Makefile b/arch/arm/boot/dts/qcom/Makefile
index e875b5d25e84..c7873dcef154 100644
--- a/arch/arm/boot/dts/qcom/Makefile
+++ b/arch/arm/boot/dts/qcom/Makefile
@@ -43,6 +43,7 @@ dtb-$(CONFIG_ARCH_QCOM) += \
 	qcom-msm8926-samsung-matisselte.dtb \
 	qcom-msm8960-cdp.dtb \
 	qcom-msm8960-samsung-expressatt.dtb \
+	qcom-msm8960-sony-huashan.dtb \
 	qcom-msm8974-lge-nexus5-hammerhead.dtb \
 	qcom-msm8974-samsung-hlte.dtb \
 	qcom-msm8974-sony-xperia-rhine-amami.dtb \
diff --git a/arch/arm/boot/dts/qcom/pm8921.dtsi b/arch/arm/boot/dts/qcom/pm8921.dtsi
index 058962af3005..535cb6a2543f 100644
--- a/arch/arm/boot/dts/qcom/pm8921.dtsi
+++ b/arch/arm/boot/dts/qcom/pm8921.dtsi
@@ -17,6 +17,12 @@
 			pull-up;
 		};
 
+		pm8921_vibrator: vibrator@4a {
+			compatible = "qcom,pm8921-vib";
+			reg = <0x4a>;
+			status = "disabled";
+		};
+
 		pm8921_mpps: mpps@50 {
 			compatible = "qcom,pm8921-mpp",
 				     "qcom,ssbi-mpp";
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064-lg-nexus4-mako.dts b/arch/arm/boot/dts/qcom/qcom-apq8064-lg-nexus4-mako.dts
index c187c6875bc6..fdbbc1389297 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064-lg-nexus4-mako.dts
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064-lg-nexus4-mako.dts
@@ -34,7 +34,7 @@
 		#size-cells = <1>;
 		ranges;
 
-		ramoops@88d00000{
+		ramoops@88d00000 {
 			compatible = "ramoops";
 			reg = <0x88d00000 0x100000>;
 			record-size = <0x20000>;
@@ -326,8 +326,8 @@
 		 */
 		pm8921_s4: s4 {
 			regulator-always-on;
-			regulator-min-microvolt	= <1800000>;
-			regulator-max-microvolt	= <1800000>;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
 			qcom,switch-mode-frequency = <1600000>;
 			bias-pull-down;
 			qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
diff --git a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
index 17e506ca2438..09062b2ad8ba 100644
--- a/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-apq8064.dtsi
@@ -342,6 +342,7 @@
 		intc: interrupt-controller@2000000 {
 			compatible = "qcom,msm-qgic2";
 			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			reg = <0x02000000 0x1000>,
 			      <0x02002000 0x1000>;
@@ -1350,10 +1351,10 @@
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 			clocks = <&gcc PCIE_A_CLK>,
 				 <&gcc PCIE_H_CLK>,
 				 <&gcc PCIE_PHY_REF_CLK>;
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
index f77542fb3d4f..8eeaab1c0be1 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq4019.dtsi
@@ -175,6 +175,7 @@
 		intc: interrupt-controller@b000000 {
 			compatible = "qcom,msm-qgic2";
 			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			reg = <0x0b000000 0x1000>,
 			<0x0b002000 0x1000>;
@@ -428,10 +429,10 @@
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 			clocks = <&gcc GCC_PCIE_AHB_CLK>,
 				 <&gcc GCC_PCIE_AXI_M_CLK>,
 				 <&gcc GCC_PCIE_AXI_S_CLK>;
diff --git a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
index 96e973501535..adedcc6da1da 100644
--- a/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-ipq8064.dtsi
@@ -527,6 +527,7 @@
 		intc: interrupt-controller@2000000 {
 			compatible = "qcom,msm-qgic2";
 			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			reg = <0x02000000 0x1000>,
 			      <0x02002000 0x1000>;
@@ -1076,10 +1077,10 @@
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc PCIE_A_CLK>,
 				 <&gcc PCIE_H_CLK>,
@@ -1137,10 +1138,10 @@
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc PCIE_1_A_CLK>,
 				 <&gcc PCIE_1_H_CLK>,
@@ -1198,10 +1199,10 @@
 			interrupt-names = "msi";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc PCIE_2_A_CLK>,
 				 <&gcc PCIE_2_H_CLK>,
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts
index 2ecc5983d365..08b50dc63923 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts
@@ -144,6 +144,8 @@
 
 		pinctrl-0 = <&tsp_int_default>;
 		pinctrl-names = "default";
+
+		linux,keycodes = <KEY_APPSELECT KEY_BACK>;
 	};
 };
 
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-pins.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960-pins.dtsi
index 4fa982771288..f18753e9f5ef 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960-pins.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-pins.dtsi
@@ -18,4 +18,44 @@
 			bias-bus-hold;
 		};
 	};
+
+	sdcc3_default_state: sdcc3-default-state {
+		clk-pins {
+			pins = "sdc3_clk";
+			drive-strength = <8>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "sdc3_cmd";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "sdc3_data";
+			drive-strength = <8>;
+			bias-pull-up;
+		};
+	};
+
+	sdcc3_sleep_state: sdcc3-sleep-state {
+		clk-pins {
+			pins = "sdc3_clk";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		cmd-pins {
+			pins = "sdc3_cmd";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		data-pins {
+			pins = "sdc3_data";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
 };
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
index af6cc6393d74..49d117ea033a 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-samsung-expressatt.dts
@@ -71,6 +71,11 @@
 &sdcc3 {
 	vmmc-supply = <&pm8921_l6>;
 	vqmmc-supply = <&pm8921_l7>;
+
+	pinctrl-0 = <&sdcc3_default_state>;
+	pinctrl-1 = <&sdcc3_sleep_state>;
+	pinctrl-names = "default", "sleep";
+
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960-sony-huashan.dts b/arch/arm/boot/dts/qcom/qcom-msm8960-sony-huashan.dts
new file mode 100644
index 000000000000..f2f59fc8b9b6
--- /dev/null
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960-sony-huashan.dts
@@ -0,0 +1,361 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2025, Antony Kurniawan Soemardi <linux@smankusors.com>
+ */
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/reset/qcom,gcc-msm8960.h>
+
+#include "qcom-msm8960.dtsi"
+#include "pm8921.dtsi"
+
+/ {
+	model = "Sony Xperia SP";
+	compatible = "sony,huashan", "qcom,msm8960t", "qcom,msm8960";
+	chassis-type = "handset";
+
+	aliases {
+		serial0 = &gsbi8_serial;
+		mmc0 = &sdcc1; /* SDCC1 eMMC slot */
+		mmc1 = &sdcc3; /* SDCC3 SD card slot */
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&pm8921_gpio 21 GPIO_ACTIVE_LOW>;
+			debounce-interval = <10>;
+			linux,code = <KEY_VOLUMEUP>;
+		};
+
+		key-volume-down {
+			label = "Volume Down";
+			gpios = <&pm8921_gpio 20 GPIO_ACTIVE_LOW>;
+			debounce-interval = <10>;
+			linux,code = <KEY_VOLUMEDOWN>;
+		};
+	};
+};
+
+&gsbi8 {
+	qcom,mode = <GSBI_PROT_I2C_UART>;
+	status = "okay";
+};
+
+&gsbi8_serial {
+	status = "okay";
+};
+
+&pm8921 {
+	interrupts-extended = <&msmgpio 104 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&pm8921_gpio {
+	keypad_default_state: keypad-default-state {
+		keypad-sense-pins {
+			pins = "gpio1", "gpio2", "gpio3", "gpio4", "gpio5";
+			function = PMIC_GPIO_FUNC_NORMAL;
+			bias-pull-up;
+			input-enable;
+			power-source = <PM8921_GPIO_S4>;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+			qcom,pull-up-strength = <PMIC_GPIO_PULL_UP_31P5>;
+		};
+
+		keypad-drive-pins {
+			pins = "gpio9", "gpio10";
+			function = PMIC_GPIO_FUNC_FUNC1;
+			bias-disable;
+			drive-open-drain;
+			output-low;
+			power-source = <PM8921_GPIO_S4>;
+			qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+		};
+	};
+};
+
+&pm8921_keypad {
+	linux,keymap = <
+		MATRIX_KEY(1, 0, KEY_CAMERA_FOCUS)
+		MATRIX_KEY(1, 1, KEY_CAMERA)
+	>;
+	keypad,num-rows = <2>;
+	keypad,num-columns = <5>;
+
+	pinctrl-0 = <&keypad_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&rpm {
+	regulators {
+		compatible = "qcom,rpm-pm8921-regulators";
+		vin_lvs1_3_6-supply = <&pm8921_s4>;
+		vin_lvs2-supply = <&pm8921_s4>;
+		vin_lvs4_5_7-supply = <&pm8921_s4>;
+		vdd_ncp-supply = <&pm8921_l6>;
+		vdd_l1_l2_l12_l18-supply = <&pm8921_s4>;
+		vdd_l21_l23_l29-supply = <&pm8921_s8>;
+		vdd_l24-supply = <&pm8921_s1>;
+		vdd_l25-supply = <&pm8921_s1>;
+		vdd_l26-supply = <&pm8921_s7>;
+		vdd_l27-supply = <&pm8921_s7>;
+		vdd_l28-supply = <&pm8921_s7>;
+		vdd_l29-supply = <&pm8921_s8>;
+
+		/* Buck SMPS */
+		pm8921_s1: s1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			qcom,switch-mode-frequency = <3200000>;
+			bias-pull-down;
+		};
+
+		pm8921_s2: s2 {
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1300000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		pm8921_s3: s3 {
+			regulator-min-microvolt = <500000>;
+			regulator-max-microvolt = <1150000>;
+			qcom,switch-mode-frequency = <4800000>;
+			bias-pull-down;
+		};
+
+		pm8921_s4: s4 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+			qcom,force-mode = <QCOM_RPM_FORCE_MODE_AUTO>;
+		};
+
+		pm8921_s7: s7 {
+			regulator-min-microvolt = <1150000>;
+			regulator-max-microvolt = <1150000>;
+			qcom,switch-mode-frequency = <3200000>;
+			bias-pull-down;
+		};
+
+		pm8921_s8: s8 {
+			regulator-always-on;
+			regulator-min-microvolt = <2050000>;
+			regulator-max-microvolt = <2050000>;
+			qcom,switch-mode-frequency = <1600000>;
+			bias-pull-down;
+		};
+
+		/* PMOS LDO */
+		pm8921_l1: l1 {
+			regulator-always-on;
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1050000>;
+			bias-pull-down;
+		};
+
+		pm8921_l2: l2 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		pm8921_l3: l3 {
+			regulator-min-microvolt = <3075000>;
+			regulator-max-microvolt = <3075000>;
+			bias-pull-down;
+		};
+
+		pm8921_l4: l4 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8921_l5: l5 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l6: l6 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l7: l7 {
+			regulator-always-on;
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l8: l8 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		pm8921_l9: l9 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+			bias-pull-down;
+		};
+
+		pm8921_l10: l10 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		pm8921_l11: l11 {
+			regulator-min-microvolt = <2600000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		pm8921_l12: l12 {
+			regulator-min-microvolt = <1050000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		pm8921_l14: l14 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8921_l15: l15 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			bias-pull-down;
+		};
+
+		pm8921_l16: l16 {
+			regulator-min-microvolt = <2600000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		pm8921_l17: l17 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <3000000>;
+			bias-pull-down;
+		};
+
+		pm8921_l18: l18 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			bias-pull-down;
+		};
+
+		pm8921_l21: l21 {
+			regulator-min-microvolt = <1900000>;
+			regulator-max-microvolt = <1900000>;
+			bias-pull-down;
+		};
+
+		pm8921_l22: l22 {
+			regulator-min-microvolt = <2750000>;
+			regulator-max-microvolt = <2750000>;
+			bias-pull-down;
+		};
+
+		pm8921_l23: l23 {
+			regulator-always-on;
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			bias-pull-down;
+		};
+
+		pm8921_l24: l24 {
+			regulator-min-microvolt = <750000>;
+			regulator-max-microvolt = <1150000>;
+			bias-pull-down;
+		};
+
+		pm8921_l25: l25 {
+			regulator-always-on;
+			regulator-min-microvolt = <1225000>;
+			regulator-max-microvolt = <1225000>;
+			bias-pull-down;
+		};
+
+		/* Low Voltage Switch */
+		pm8921_lvs1: lvs1 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs2: lvs2 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs3: lvs3 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs4: lvs4 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs5: lvs5 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs6: lvs6 {
+			bias-pull-down;
+		};
+
+		pm8921_lvs7: lvs7 {
+			bias-pull-down;
+		};
+
+		pm8921_ncp: ncp {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			qcom,switch-mode-frequency = <1600000>;
+		};
+	};
+};
+
+&sdcc1 {
+	vmmc-supply = <&pm8921_l5>;
+	status = "okay";
+};
+
+&sdcc3 {
+	vmmc-supply = <&pm8921_l6>;
+	vqmmc-supply = <&pm8921_l7>;
+
+	pinctrl-0 = <&sdcc3_default_state>;
+	pinctrl-1 = <&sdcc3_sleep_state>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+};
+
+&usb_hs1_phy {
+	v3p3-supply = <&pm8921_l3>;
+	v1p8-supply = <&pm8921_l4>;
+};
+
+&usb1 {
+	dr_mode = "otg";
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
index 203f0b69b353..6e272d5345a8 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
@@ -322,6 +322,8 @@
 
 			syscon-tcsr = <&tcsr>;
 
+			status = "disabled";
+
 			gsbi5_serial: serial@16440000 {
 				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
 				reg = <0x16440000 0x1000>,
@@ -333,6 +335,34 @@
 			};
 		};
 
+		gsbi8: gsbi@1a000000  {
+			compatible = "qcom,gsbi-v1.0.0";
+			cell-index = <8>;
+			reg = <0x1a000000 0x100>;
+			clocks = <&gcc GSBI8_H_CLK>;
+			clock-names = "iface";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			syscon-tcsr = <&tcsr>;
+
+			status = "disabled";
+
+			gsbi8_serial: serial@1a040000 {
+				compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
+				reg = <0x1a040000 0x1000>,
+				      <0x1a000000 0x1000>;
+				interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&gcc GSBI8_UART_CLK>,
+					 <&gcc GSBI8_H_CLK>;
+				clock-names = "core",
+					      "iface";
+
+				status = "disabled";
+			};
+		};
+
 		ssbi: ssbi@500000 {
 			compatible = "qcom,ssbi";
 			reg = <0x500000 0x1000>;
@@ -417,6 +447,8 @@
 			#size-cells = <1>;
 			ranges;
 
+			status = "disabled";
+
 			gsbi1_spi: spi@16080000 {
 				compatible = "qcom,spi-qup-v1.1.1";
 				#address-cells = <1>;
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts b/arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts
index 903bb4d12513..b7a1367d3470 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8974-samsung-hlte.dts
@@ -50,6 +50,34 @@
 		};
 	};
 
+	i2c-touchkey {
+		compatible = "i2c-gpio";
+
+		sda-gpios = <&tlmm 95 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 96 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+		pinctrl-0 = <&i2c_touchkey_pins>;
+		pinctrl-names = "default";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		touchkey@20 {
+			compatible = "cypress,midas-touchkey";
+			reg = <0x20>;
+
+			interrupts-extended = <&pm8941_gpios 29 IRQ_TYPE_EDGE_FALLING>;
+
+			pinctrl-0 = <&touchkey_pin>;
+			pinctrl-names = "default";
+
+			vcc-supply = <&pm8941_lvs3>;
+			vdd-supply = <&pm8941_l13>;
+
+			linux,keycodes = <KEY_APPSELECT KEY_BACK>;
+		};
+	};
+
 	touch_ldo: regulator-touch {
 		compatible = "regulator-fixed";
 		regulator-name = "touch-ldo";
@@ -149,6 +177,14 @@
 		power-source = <PM8941_GPIO_S3>;
 		qcom,drive-strength = <PMIC_GPIO_STRENGTH_HIGH>;
 	};
+
+	touchkey_pin: touchkey-int-state {
+		pins = "gpio29";
+		function = "normal";
+		bias-disable;
+		input-enable;
+		power-source = <PM8941_GPIO_S3>;
+	};
 };
 
 &remoteproc_adsp {
@@ -332,6 +368,9 @@
 			regulator-min-microvolt = <3075000>;
 			regulator-max-microvolt = <3075000>;
 		};
+
+		pm8941_lvs1: lvs1 {};
+		pm8941_lvs3: lvs3 {};
 	};
 };
 
@@ -378,6 +417,12 @@
 		drive-strength = <8>;
 		bias-disable;
 	};
+
+	i2c_touchkey_pins: i2c-touchkey-state {
+		pins = "gpio95", "gpio96";
+		function = "gpio";
+		bias-pull-up;
+	};
 };
 
 &usb {
diff --git a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
index 20fdae9825e0..05b79281df57 100644
--- a/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-sdx55.dtsi
@@ -340,10 +340,10 @@
 					  "msi8";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_PIPE_CLK>,
 				 <&gcc GCC_PCIE_AUX_CLK>,
@@ -707,6 +707,7 @@
 			compatible = "qcom,msm-qgic2";
 			interrupt-controller;
 			interrupt-parent = <&intc>;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			reg = <0x17800000 0x1000>,
 			      <0x17802000 0x1000>;
diff --git a/arch/arm/boot/dts/renesas/r7s72100-genmai.dts b/arch/arm/boot/dts/renesas/r7s72100-genmai.dts
index c81840dfb7da..3c3756509714 100644
--- a/arch/arm/boot/dts/renesas/r7s72100-genmai.dts
+++ b/arch/arm/boot/dts/renesas/r7s72100-genmai.dts
@@ -203,6 +203,7 @@
 };
 
 &ostm0 {
+	bootph-all;
 	status = "okay";
 };
 
@@ -258,6 +259,7 @@
 	};
 
 	scif2_pins: serial2 {
+		bootph-all;
 		/* P3_0 as TxD2; P3_2 as RxD2 */
 		pinmux = <RZA1_PINMUX(3, 0, 6)>, <RZA1_PINMUX(3, 2, 4)>;
 	};
@@ -286,7 +288,7 @@
 &scif2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&scif2_pins>;
-
+	bootph-all;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/renesas/r7s72100-gr-peach.dts b/arch/arm/boot/dts/renesas/r7s72100-gr-peach.dts
index 9d29861f23f1..23ddec217685 100644
--- a/arch/arm/boot/dts/renesas/r7s72100-gr-peach.dts
+++ b/arch/arm/boot/dts/renesas/r7s72100-gr-peach.dts
@@ -59,6 +59,7 @@
 
 &pinctrl {
 	scif2_pins: serial2 {
+		bootph-all;
 		/* P6_2 as RxD2; P6_3 as TxD2 */
 		pinmux = <RZA1_PINMUX(6, 2, 7)>, <RZA1_PINMUX(6, 3, 7)>;
 	};
@@ -99,6 +100,7 @@
 };
 
 &ostm0 {
+	bootph-all;
 	status = "okay";
 };
 
@@ -109,7 +111,7 @@
 &scif2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&scif2_pins>;
-
+	bootph-all;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts b/arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts
index 25c6d0c78828..91178fb9e721 100644
--- a/arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts
+++ b/arch/arm/boot/dts/renesas/r7s72100-rskrza1.dts
@@ -199,6 +199,7 @@
 
 	/* Serial Console */
 	scif2_pins: serial2 {
+		bootph-all;
 		pinmux = <RZA1_PINMUX(3, 0, 6)>,	/* TxD2 */
 			 <RZA1_PINMUX(3, 2, 4)>;	/* RxD2 */
 	};
@@ -264,6 +265,7 @@
 };
 
 &ostm0 {
+	bootph-all;
 	status = "okay";
 };
 
@@ -278,6 +280,7 @@
 &scif2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&scif2_pins>;
+	bootph-all;
 	status = "okay";
 };
 
diff --git a/arch/arm/boot/dts/renesas/r7s72100.dtsi b/arch/arm/boot/dts/renesas/r7s72100.dtsi
index 1a866dbaf5e9..a1e4e9ac8f62 100644
--- a/arch/arm/boot/dts/renesas/r7s72100.dtsi
+++ b/arch/arm/boot/dts/renesas/r7s72100.dtsi
@@ -41,6 +41,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0 0 0x18000000>;
+		bootph-all;
 	};
 
 	cpus {
@@ -107,6 +108,7 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges;
+		bootph-all;
 
 		L2: cache-controller@3ffff000 {
 			compatible = "arm,pl310-cache";
@@ -557,6 +559,7 @@
 
 		pinctrl: pinctrl@fcfe3000 {
 			compatible = "renesas,r7s72100-ports";
+			bootph-all;
 
 			reg = <0xfcfe3000 0x4230>;
 
diff --git a/arch/arm/boot/dts/renesas/r8a7791-porter.dts b/arch/arm/boot/dts/renesas/r8a7791-porter.dts
index f518eadd8b9c..81b3c5d74e9b 100644
--- a/arch/arm/boot/dts/renesas/r8a7791-porter.dts
+++ b/arch/arm/boot/dts/renesas/r8a7791-porter.dts
@@ -289,7 +289,7 @@
 	};
 
 	can0_pins: can0 {
-		groups = "can0_data";
+		groups = "can0_data_b";
 		function = "can0";
 	};
 
diff --git a/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts b/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts
index 21f824b09191..decbf2726ec4 100644
--- a/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts
+++ b/arch/arm/boot/dts/rockchip/rk3128-xpi-3128.dts
@@ -272,7 +272,7 @@
 	phy-mode = "rmii";
 	phy-handle = <&phy0>;
 	assigned-clocks = <&cru SCLK_MAC_SRC>;
-	assigned-clock-rates= <50000000>;
+	assigned-clock-rates = <50000000>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&rmii_pins>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/rockchip/rk3288-miqi.dts b/arch/arm/boot/dts/rockchip/rk3288-miqi.dts
index dd42f8d31f70..a5f5c6d38f80 100644
--- a/arch/arm/boot/dts/rockchip/rk3288-miqi.dts
+++ b/arch/arm/boot/dts/rockchip/rk3288-miqi.dts
@@ -78,6 +78,21 @@
 		regulator-always-on;
 		regulator-boot-on;
 	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "HDMI";
+		simple-audio-card,mclk-fs = <512>;
+
+		simple-audio-card,codec {
+			sound-dai = <&hdmi>;
+		};
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s>;
+		};
+	};
 };
 
 &cpu0 {
@@ -130,6 +145,8 @@
 
 &hdmi {
 	ddc-i2c-bus = <&i2c5>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec_c0>;
 	status = "okay";
 };
 
@@ -283,6 +300,11 @@
 	status = "okay";
 };
 
+&i2s {
+	#sound-dai-cells = <0>;
+	status = "okay";
+};
+
 &io_domains {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/rockchip/rv1109-relfor-saib.dts b/arch/arm/boot/dts/rockchip/rv1109-relfor-saib.dts
index c13829d32c32..8a92700349b4 100644
--- a/arch/arm/boot/dts/rockchip/rv1109-relfor-saib.dts
+++ b/arch/arm/boot/dts/rockchip/rv1109-relfor-saib.dts
@@ -250,9 +250,9 @@
 &i2s0 {
 	/delete-property/ pinctrl-0;
 	rockchip,trcm-sync-rx-only;
-	pinctrl-0 =  <&i2s0m0_sclk_rx>,
-		     <&i2s0m0_lrck_rx>,
-		     <&i2s0m0_sdi0>;
+	pinctrl-0 = <&i2s0m0_sclk_rx>,
+		    <&i2s0m0_lrck_rx>,
+		    <&i2s0m0_sdi0>;
 	pinctrl-names = "default";
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/samsung/exynos5250-smdk5250.dts b/arch/arm/boot/dts/samsung/exynos5250-smdk5250.dts
index bb623726ef1e..6af1f64c984b 100644
--- a/arch/arm/boot/dts/samsung/exynos5250-smdk5250.dts
+++ b/arch/arm/boot/dts/samsung/exynos5250-smdk5250.dts
@@ -422,6 +422,43 @@
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
 	};
+
+	srom_ctl: srom-ctl-pins {
+		samsung,pins = "gpy0-3", "gpy0-4", "gpy0-5",
+			       "gpy1-0", "gpy1-1", "gpy1-2", "gpy1-3";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+
+	srom_ebi: srom-ebi-pins {
+		samsung,pins = "gpy3-0", "gpy3-1", "gpy3-2", "gpy3-3",
+			       "gpy3-4", "gpy3-5", "gpy3-6", "gpy3-7",
+			       "gpy5-0", "gpy5-1", "gpy5-2", "gpy5-3",
+			       "gpy5-4", "gpy5-5", "gpy5-6", "gpy5-7",
+			       "gpy6-0", "gpy6-1", "gpy6-2", "gpy6-3",
+			       "gpy6-4", "gpy6-5", "gpy6-6", "gpy6-7";
+		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
+		samsung,pin-drv = <EXYNOS4_PIN_DRV_LV1>;
+	};
+};
+
+&sromc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&srom_ctl>, <&srom_ebi>;
+
+	ethernet@1,0 {
+		compatible = "smsc,lan9115";
+		reg = <1 0 0x100>;
+		phy-mode = "mii";
+		smsc,irq-push-pull;
+		interrupt-parent = <&gpx0>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		reg-io-width = <2>;
+
+		samsung,srom-page-mode;
+		samsung,srom-timing = <9 12 1 6 1 1>;
+	};
 };
 
 &usbdrd {
diff --git a/arch/arm/boot/dts/samsung/exynos5250.dtsi b/arch/arm/boot/dts/samsung/exynos5250.dtsi
index b9e7c4938818..4616794b19e8 100644
--- a/arch/arm/boot/dts/samsung/exynos5250.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos5250.dtsi
@@ -1214,6 +1214,15 @@
 	dma-names = "rx", "tx";
 };
 
+&sromc {
+	#address-cells = <2>;
+	#size-cells = <1>;
+	ranges = <0 0 0x04000000 0x20000>,
+		 <1 0 0x05000000 0x20000>,
+		 <2 0 0x06000000 0x20000>,
+		 <3 0 0x07000000 0x20000>;
+};
+
 &sss {
 	clocks = <&clock CLK_SSS>;
 	clock-names = "secss";
diff --git a/arch/arm/boot/dts/samsung/exynos5410.dtsi b/arch/arm/boot/dts/samsung/exynos5410.dtsi
index 546035e78f40..350bc8d6aa5c 100644
--- a/arch/arm/boot/dts/samsung/exynos5410.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos5410.dtsi
@@ -372,10 +372,10 @@
 &sromc {
 	#address-cells = <2>;
 	#size-cells = <1>;
-	ranges = <0 0 0x04000000 0x20000
-		  1 0 0x05000000 0x20000
-		  2 0 0x06000000 0x20000
-		  3 0 0x07000000 0x20000>;
+	ranges = <0 0 0x04000000 0x20000>,
+		 <1 0 0x05000000 0x20000>,
+		 <2 0 0x06000000 0x20000>,
+		 <3 0 0x07000000 0x20000>;
 };
 
 &trng {
diff --git a/arch/arm/boot/dts/socionext/uniphier-pxs2-vodka.dts b/arch/arm/boot/dts/socionext/uniphier-pxs2-vodka.dts
index 7e08a459f7d8..ab910e1b5e6a 100644
--- a/arch/arm/boot/dts/socionext/uniphier-pxs2-vodka.dts
+++ b/arch/arm/boot/dts/socionext/uniphier-pxs2-vodka.dts
@@ -43,7 +43,7 @@
 		compatible = "linux,spdif-dit";
 		#sound-dai-cells = <0>;
 
-		port@0 {
+		port {
 			spdif_tx: endpoint {
 				remote-endpoint = <&spdif_hiecout1>;
 			};
@@ -54,7 +54,7 @@
 		compatible = "linux,spdif-dit";
 		#sound-dai-cells = <0>;
 
-		port@0 {
+		port {
 			comp_spdif_tx: endpoint {
 				remote-endpoint = <&comp_spdif_hiecout1>;
 			};
diff --git a/arch/arm/boot/dts/st/Makefile b/arch/arm/boot/dts/st/Makefile
index 66d4f96da5dd..e906bf6ba004 100644
--- a/arch/arm/boot/dts/st/Makefile
+++ b/arch/arm/boot/dts/st/Makefile
@@ -13,8 +13,6 @@ dtb-$(CONFIG_ARCH_SPEAR3XX) += \
 dtb-$(CONFIG_ARCH_SPEAR6XX) += \
 	spear600-evb.dtb
 dtb-$(CONFIG_ARCH_STI) += \
-	stih407-b2120.dtb \
-	stih410-b2120.dtb \
 	stih410-b2260.dtb \
 	stih418-b2199.dtb \
 	stih418-b2264.dtb
diff --git a/arch/arm/boot/dts/st/ste-nomadik-s8815.dts b/arch/arm/boot/dts/st/ste-nomadik-s8815.dts
index c905c2643a12..7c7a53604204 100644
--- a/arch/arm/boot/dts/st/ste-nomadik-s8815.dts
+++ b/arch/arm/boot/dts/st/ste-nomadik-s8815.dts
@@ -23,7 +23,7 @@
 
 	gpio3: gpio@101e7000 {
 		/* This hog will bias the MMC/SD card detect line */
-		mmcsd-gpio {
+		mmcsd-hog {
 			gpio-hog;
 			gpios = <16 0x0>;
 			output-low;
@@ -117,8 +117,8 @@
 	/* GPIO I2C connected to the USB portions of the STw4811 only */
 	gpio-i2c {
 		compatible = "i2c-gpio";
-		gpios = <&gpio2 10 0>, /* sda */
-			<&gpio2 9 0>; /* scl */
+		sda-gpios = <&gpio2 10 0>;
+		scl-gpios = <&gpio2 9 0>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 		pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts
index 404d4ea9347b..8f1780d560ff 100644
--- a/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts
+++ b/arch/arm/boot/dts/st/ste-ux500-samsung-codina-tmo.dts
@@ -383,8 +383,9 @@
 				/* BT_WAKE on GPIO199 */
 				device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
 				/* BT_HOST_WAKE on GPIO97 */
-				/* FIXME: convert to interrupt */
-				host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+				interrupt-parent = <&gpio3>;
+				interrupts = <1 IRQ_TYPE_EDGE_RISING>;
+				interrupt-names = "host-wakeup";
 				/* BT_RST_N on GPIO209 */
 				reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>;
 				pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts
index 40b0d92dfb15..9f58a3c2d06d 100644
--- a/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts
+++ b/arch/arm/boot/dts/st/ste-ux500-samsung-codina.dts
@@ -479,8 +479,9 @@
 				/* BT_WAKE on GPIO199 */
 				device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
 				/* BT_HOST_WAKE on GPIO97 */
-				/* FIXME: convert to interrupt */
-				host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+				interrupt-parent = <&gpio3>;
+				interrupts = <1 IRQ_TYPE_EDGE_RISING>;
+				interrupt-names = "host-wakeup";
 				/* BT_RST_N on GPIO209 */
 				reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>;
 				pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/st/ste-ux500-samsung-janice.dts b/arch/arm/boot/dts/st/ste-ux500-samsung-janice.dts
index 229f7c32103c..64562a3a262c 100644
--- a/arch/arm/boot/dts/st/ste-ux500-samsung-janice.dts
+++ b/arch/arm/boot/dts/st/ste-ux500-samsung-janice.dts
@@ -481,8 +481,9 @@
 				/* BT_WAKE on GPIO199 */
 				device-wakeup-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
 				/* BT_HOST_WAKE on GPIO97 */
-				/* FIXME: convert to interrupt */
-				host-wakeup-gpios = <&gpio3 1 GPIO_ACTIVE_HIGH>;
+				interrupt-parent = <&gpio3>;
+				interrupts = <1 IRQ_TYPE_EDGE_RISING>;
+				interrupt-names = "host-wakeup";
 				/* BT_RST_N on GPIO209 */
 				reset-gpios = <&gpio6 17 GPIO_ACTIVE_LOW>;
 				pinctrl-names = "default";
diff --git a/arch/arm/boot/dts/st/stih407-b2120.dts b/arch/arm/boot/dts/st/stih407-b2120.dts
deleted file mode 100644
index 9c79982ee7ba..000000000000
--- a/arch/arm/boot/dts/st/stih407-b2120.dts
+++ /dev/null
@@ -1,27 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
- * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
- */
-/dts-v1/;
-#include "stih407.dtsi"
-#include "stihxxx-b2120.dtsi"
-/ {
-	model = "STiH407 B2120";
-	compatible = "st,stih407-b2120", "st,stih407";
-
-	chosen {
-		stdout-path = &sbc_serial0;
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x80000000>;
-	};
-
-	aliases {
-		serial0 = &sbc_serial0;
-		ethernet0 = &ethernet0;
-	};
-
-};
diff --git a/arch/arm/boot/dts/st/stih407-clock.dtsi b/arch/arm/boot/dts/st/stih407-clock.dtsi
deleted file mode 100644
index 350bcfcf498b..000000000000
--- a/arch/arm/boot/dts/st/stih407-clock.dtsi
+++ /dev/null
@@ -1,210 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 STMicroelectronics R&D Limited
- */
-#include <dt-bindings/clock/stih407-clks.h>
-/ {
-	/*
-	 * Fixed 30MHz oscillator inputs to SoC
-	 */
-	clk_sysin: clk-sysin {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <30000000>;
-	};
-
-	clk_tmdsout_hdmi: clk-tmdsout-hdmi {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <0>;
-	};
-
-	clocks {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		/*
-		 * A9 PLL.
-		 */
-		clockgen-a9@92b0000 {
-			compatible = "st,clkgen-c32";
-			reg = <0x92b0000 0x10000>;
-
-			clockgen_a9_pll: clockgen-a9-pll {
-				#clock-cells = <1>;
-				compatible = "st,stih407-clkgen-plla9";
-
-				clocks = <&clk_sysin>;
-			};
-
-			clk_m_a9: clk-m-a9 {
-				#clock-cells = <0>;
-				compatible = "st,stih407-clkgen-a9-mux";
-
-				clocks = <&clockgen_a9_pll 0>,
-					 <&clockgen_a9_pll 0>,
-					 <&clk_s_c0_flexgen 13>,
-					 <&clk_m_a9_ext2f_div2>;
-
-				/*
-				 * ARM Peripheral clock for timers
-				 */
-				arm_periph_clk: clk-m-a9-periphs {
-					#clock-cells = <0>;
-					compatible = "fixed-factor-clock";
-
-					clocks = <&clk_m_a9>;
-					clock-div = <2>;
-					clock-mult = <1>;
-				};
-			};
-		};
-
-		clockgen-a@90ff000 {
-			compatible = "st,clkgen-c32";
-			reg = <0x90ff000 0x1000>;
-
-			clk_s_a0_pll: clk-s-a0-pll {
-				#clock-cells = <1>;
-				compatible = "st,clkgen-pll0-a0";
-
-				clocks = <&clk_sysin>;
-			};
-
-			clk_s_a0_flexgen: clk-s-a0-flexgen {
-				compatible = "st,flexgen", "st,flexgen-stih407-a0";
-
-				#clock-cells = <1>;
-
-				clocks = <&clk_s_a0_pll 0>,
-					 <&clk_sysin>;
-			};
-		};
-
-		clk_s_c0: clockgen-c@9103000 {
-			compatible = "st,clkgen-c32";
-			reg = <0x9103000 0x1000>;
-
-			clk_s_c0_pll0: clk-s-c0-pll0 {
-				#clock-cells = <1>;
-				compatible = "st,clkgen-pll0-c0";
-
-				clocks = <&clk_sysin>;
-			};
-
-			clk_s_c0_pll1: clk-s-c0-pll1 {
-				#clock-cells = <1>;
-				compatible = "st,clkgen-pll1-c0";
-
-				clocks = <&clk_sysin>;
-			};
-
-			clk_s_c0_quadfs: clk-s-c0-quadfs {
-				#clock-cells = <1>;
-				compatible = "st,quadfs-pll";
-
-				clocks = <&clk_sysin>;
-			};
-
-			clk_s_c0_flexgen: clk-s-c0-flexgen {
-				#clock-cells = <1>;
-				compatible = "st,flexgen", "st,flexgen-stih407-c0";
-
-				clocks = <&clk_s_c0_pll0 0>,
-					 <&clk_s_c0_pll1 0>,
-					 <&clk_s_c0_quadfs 0>,
-					 <&clk_s_c0_quadfs 1>,
-					 <&clk_s_c0_quadfs 2>,
-					 <&clk_s_c0_quadfs 3>,
-					 <&clk_sysin>;
-
-				/*
-				 * ARM Peripheral clock for timers
-				 */
-				clk_m_a9_ext2f_div2: clk-m-a9-ext2f-div2s {
-					#clock-cells = <0>;
-					compatible = "fixed-factor-clock";
-
-					clocks = <&clk_s_c0_flexgen 13>;
-
-					clock-output-names = "clk-m-a9-ext2f-div2";
-
-					clock-div = <2>;
-					clock-mult = <1>;
-				};
-			};
-		};
-
-		clockgen-d0@9104000 {
-			compatible = "st,clkgen-c32";
-			reg = <0x9104000 0x1000>;
-
-			clk_s_d0_quadfs: clk-s-d0-quadfs {
-				#clock-cells = <1>;
-				compatible = "st,quadfs-d0";
-
-				clocks = <&clk_sysin>;
-			};
-
-			clk_s_d0_flexgen: clk-s-d0-flexgen {
-				#clock-cells = <1>;
-				compatible = "st,flexgen", "st,flexgen-stih407-d0";
-
-				clocks = <&clk_s_d0_quadfs 0>,
-					 <&clk_s_d0_quadfs 1>,
-					 <&clk_s_d0_quadfs 2>,
-					 <&clk_s_d0_quadfs 3>,
-					 <&clk_sysin>;
-			};
-		};
-
-		clockgen-d2@9106000 {
-			compatible = "st,clkgen-c32";
-			reg = <0x9106000 0x1000>;
-
-			clk_s_d2_quadfs: clk-s-d2-quadfs {
-				#clock-cells = <1>;
-				compatible = "st,quadfs-d2";
-
-				clocks = <&clk_sysin>;
-			};
-
-			clk_s_d2_flexgen: clk-s-d2-flexgen {
-				#clock-cells = <1>;
-				compatible = "st,flexgen", "st,flexgen-stih407-d2";
-
-				clocks = <&clk_s_d2_quadfs 0>,
-					 <&clk_s_d2_quadfs 1>,
-					 <&clk_s_d2_quadfs 2>,
-					 <&clk_s_d2_quadfs 3>,
-					 <&clk_sysin>,
-					 <&clk_sysin>,
-					 <&clk_tmdsout_hdmi>;
-			};
-		};
-
-		clockgen-d3@9107000 {
-			compatible = "st,clkgen-c32";
-			reg = <0x9107000 0x1000>;
-
-			clk_s_d3_quadfs: clk-s-d3-quadfs {
-				#clock-cells = <1>;
-				compatible = "st,quadfs-d3";
-
-				clocks = <&clk_sysin>;
-			};
-
-			clk_s_d3_flexgen: clk-s-d3-flexgen {
-				#clock-cells = <1>;
-				compatible = "st,flexgen", "st,flexgen-stih407-d3";
-
-				clocks = <&clk_s_d3_quadfs 0>,
-					 <&clk_s_d3_quadfs 1>,
-					 <&clk_s_d3_quadfs 2>,
-					 <&clk_s_d3_quadfs 3>,
-					 <&clk_sysin>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/st/stih407-family.dtsi b/arch/arm/boot/dts/st/stih407-family.dtsi
index 35a55aef7f4b..3e6a0542e3ae 100644
--- a/arch/arm/boot/dts/st/stih407-family.dtsi
+++ b/arch/arm/boot/dts/st/stih407-family.dtsi
@@ -669,7 +669,7 @@
 			interrupt-names = "hostc";
 
 			phys = <&phy_port0 PHY_TYPE_SATA>;
-			phy-names = "ahci_phy";
+			phy-names = "sata-phy";
 
 			resets = <&powerdown STIH407_SATA0_POWERDOWN>,
 				 <&softreset STIH407_SATA0_SOFTRESET>,
@@ -692,7 +692,7 @@
 			interrupt-names = "hostc";
 
 			phys = <&phy_port1 PHY_TYPE_SATA>;
-			phy-names = "ahci_phy";
+			phy-names = "sata-phy";
 
 			resets = <&powerdown STIH407_SATA1_POWERDOWN>,
 				 <&softreset STIH407_SATA1_SOFTRESET>,
diff --git a/arch/arm/boot/dts/st/stih407.dtsi b/arch/arm/boot/dts/st/stih407.dtsi
deleted file mode 100644
index aca43d2bdaad..000000000000
--- a/arch/arm/boot/dts/st/stih407.dtsi
+++ /dev/null
@@ -1,145 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2015 STMicroelectronics Limited.
- * Author: Gabriel Fernandez <gabriel.fernandez@linaro.org>
- */
-#include "stih407-clock.dtsi"
-#include "stih407-family.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-/ {
-	soc {
-		sti-display-subsystem@0 {
-			compatible = "st,sti-display-subsystem";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			reg = <0 0>;
-			assigned-clocks = <&clk_s_d2_quadfs 0>,
-					  <&clk_s_d2_quadfs 1>,
-					  <&clk_s_c0_pll1 0>,
-					  <&clk_s_c0_flexgen CLK_COMPO_DVP>,
-					  <&clk_s_c0_flexgen CLK_MAIN_DISP>,
-					  <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
-					  <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
-					  <&clk_s_d2_flexgen CLK_PIX_GDP1>,
-					  <&clk_s_d2_flexgen CLK_PIX_GDP2>,
-					  <&clk_s_d2_flexgen CLK_PIX_GDP3>,
-					  <&clk_s_d2_flexgen CLK_PIX_GDP4>;
-
-			assigned-clock-parents = <0>,
-						 <0>,
-						 <0>,
-						 <&clk_s_c0_pll1 0>,
-						 <&clk_s_c0_pll1 0>,
-						 <&clk_s_d2_quadfs 0>,
-						 <&clk_s_d2_quadfs 1>,
-						 <&clk_s_d2_quadfs 0>,
-						 <&clk_s_d2_quadfs 0>,
-						 <&clk_s_d2_quadfs 0>,
-						 <&clk_s_d2_quadfs 0>;
-
-			assigned-clock-rates = <297000000>,
-					       <108000000>,
-					       <0>,
-					       <400000000>,
-					       <400000000>;
-
-			ranges;
-
-			sti-compositor@9d11000 {
-				compatible = "st,stih407-compositor";
-				reg = <0x9d11000 0x1000>;
-
-				clock-names = "compo_main",
-					      "compo_aux",
-					      "pix_main",
-					      "pix_aux",
-					      "pix_gdp1",
-					      "pix_gdp2",
-					      "pix_gdp3",
-					      "pix_gdp4",
-					      "main_parent",
-					      "aux_parent";
-
-				clocks = <&clk_s_c0_flexgen CLK_COMPO_DVP>,
-					 <&clk_s_c0_flexgen CLK_COMPO_DVP>,
-					 <&clk_s_d2_flexgen CLK_PIX_MAIN_DISP>,
-					 <&clk_s_d2_flexgen CLK_PIX_AUX_DISP>,
-					 <&clk_s_d2_flexgen CLK_PIX_GDP1>,
-					 <&clk_s_d2_flexgen CLK_PIX_GDP2>,
-					 <&clk_s_d2_flexgen CLK_PIX_GDP3>,
-					 <&clk_s_d2_flexgen CLK_PIX_GDP4>,
-					 <&clk_s_d2_quadfs 0>,
-					 <&clk_s_d2_quadfs 1>;
-
-				reset-names = "compo-main", "compo-aux";
-				resets = <&softreset STIH407_COMPO_SOFTRESET>,
-					 <&softreset STIH407_COMPO_SOFTRESET>;
-				st,vtg = <&vtg_main>, <&vtg_aux>;
-			};
-
-			sti-tvout@8d08000 {
-				compatible = "st,stih407-tvout";
-				reg = <0x8d08000 0x1000>;
-				reg-names = "tvout-reg";
-				reset-names = "tvout";
-				resets = <&softreset STIH407_HDTVOUT_SOFTRESET>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				assigned-clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
-						  <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
-						  <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
-						  <&clk_s_d0_flexgen CLK_PCM_0>,
-						  <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
-						  <&clk_s_d2_flexgen CLK_HDDAC>;
-
-				assigned-clock-parents = <&clk_s_d2_quadfs 0>,
-							 <&clk_tmdsout_hdmi>,
-							 <&clk_s_d2_quadfs 0>,
-							 <&clk_s_d0_quadfs 0>,
-							 <&clk_s_d2_quadfs 0>,
-							 <&clk_s_d2_quadfs 0>;
-			};
-
-			sti_hdmi: sti-hdmi@8d04000 {
-				compatible = "st,stih407-hdmi";
-				reg = <0x8d04000 0x1000>;
-				reg-names = "hdmi-reg";
-				#sound-dai-cells = <0>;
-				interrupts = <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "irq";
-				clock-names = "pix",
-					      "tmds",
-					      "phy",
-					      "audio",
-					      "main_parent",
-					      "aux_parent";
-
-				clocks = <&clk_s_d2_flexgen CLK_PIX_HDMI>,
-					 <&clk_s_d2_flexgen CLK_TMDS_HDMI>,
-					 <&clk_s_d2_flexgen CLK_REF_HDMIPHY>,
-					 <&clk_s_d0_flexgen CLK_PCM_0>,
-					 <&clk_s_d2_quadfs 0>,
-					 <&clk_s_d2_quadfs 1>;
-
-				hdmi,hpd-gpio = <&pio5 3 GPIO_ACTIVE_LOW>;
-				reset-names = "hdmi";
-				resets = <&softreset STIH407_HDMI_TX_PHY_SOFTRESET>;
-				ddc = <&hdmiddc>;
-			};
-
-			sti-hda@8d02000 {
-				compatible = "st,stih407-hda";
-				reg = <0x8d02000 0x400>, <0x92b0120 0x4>;
-				reg-names = "hda-reg", "video-dacs-ctrl";
-				clock-names = "pix",
-					      "hddac",
-					      "main_parent",
-					      "aux_parent";
-				clocks = <&clk_s_d2_flexgen CLK_PIX_HDDAC>,
-					 <&clk_s_d2_flexgen CLK_HDDAC>,
-					 <&clk_s_d2_quadfs 0>,
-					 <&clk_s_d2_quadfs 1>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/st/stih410-b2120.dts b/arch/arm/boot/dts/st/stih410-b2120.dts
deleted file mode 100644
index 538ff98ca1b1..000000000000
--- a/arch/arm/boot/dts/st/stih410-b2120.dts
+++ /dev/null
@@ -1,66 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
- * Author: Peter Griffin <peter.griffin@linaro.org>
- */
-/dts-v1/;
-#include "stih410.dtsi"
-#include "stihxxx-b2120.dtsi"
-/ {
-	model = "STiH410 B2120";
-	compatible = "st,stih410-b2120", "st,stih410";
-
-	chosen {
-		stdout-path = &sbc_serial0;
-	};
-
-	memory@40000000 {
-		device_type = "memory";
-		reg = <0x40000000 0x80000000>;
-	};
-
-	aliases {
-		serial0 = &sbc_serial0;
-		ethernet0 = &ethernet0;
-	};
-
-	usb2_picophy1: phy2 {
-		status = "okay";
-	};
-
-	usb2_picophy2: phy3 {
-		status = "okay";
-	};
-
-	soc {
-
-		mmc0: sdhci@9060000 {
-			max-frequency = <200000000>;
-			sd-uhs-sdr50;
-			sd-uhs-sdr104;
-			sd-uhs-ddr50;
-		};
-
-		ohci0: usb@9a03c00 {
-			status = "okay";
-		};
-
-		ehci0: usb@9a03e00 {
-			status = "okay";
-		};
-
-		ohci1: usb@9a83c00 {
-			status = "okay";
-		};
-
-		ehci1: usb@9a83e00 {
-			status = "okay";
-		};
-
-		sti-display-subsystem@0 {
-			sti-hda@8d02000 {
-				status = "okay";
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/st/stihxxx-b2120.dtsi b/arch/arm/boot/dts/st/stihxxx-b2120.dtsi
deleted file mode 100644
index 8d9a2dfa76f1..000000000000
--- a/arch/arm/boot/dts/st/stihxxx-b2120.dtsi
+++ /dev/null
@@ -1,206 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2014 STMicroelectronics (R&D) Limited.
- * Author: Giuseppe Cavallaro <peppe.cavallaro@st.com>
- */
-#include <dt-bindings/clock/stih407-clks.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/media/c8sectpfe.h>
-/ {
-	leds {
-		compatible = "gpio-leds";
-		led-red {
-			label = "Front Panel LED";
-			gpios = <&pio4 1 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-		led-green {
-			gpios = <&pio1 3 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-		};
-	};
-
-	sound: sound {
-		compatible = "simple-audio-card";
-		simple-audio-card,name = "STI-B2120";
-		status = "okay";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		simple-audio-card,dai-link@0 {
-			reg = <0>;
-			/* HDMI */
-			format = "i2s";
-			mclk-fs = <128>;
-			cpu {
-				sound-dai = <&sti_uni_player0>;
-			};
-
-			codec {
-				sound-dai = <&sti_hdmi>;
-			};
-		};
-
-		simple-audio-card,dai-link@1 {
-			reg = <1>;
-			/* DAC */
-			format = "i2s";
-			mclk-fs = <256>;
-			frame-inversion;
-			cpu {
-				sound-dai = <&sti_uni_player2>;
-			};
-
-			codec {
-				sound-dai = <&sti_sasg_codec 1>;
-			};
-		};
-
-		simple-audio-card,dai-link@2 {
-			reg = <2>;
-			/* SPDIF */
-			format = "left_j";
-			mclk-fs = <128>;
-			cpu {
-				sound-dai = <&sti_uni_player3>;
-			};
-
-			codec {
-				sound-dai = <&sti_sasg_codec 0>;
-			};
-		};
-	};
-
-	miphy28lp_phy: miphy28lp {
-
-		phy_port0: port@9b22000 {
-			st,osc-rdy;
-		};
-
-		phy_port1: port@9b2a000 {
-			st,osc-force-ext;
-		};
-	};
-
-	soc {
-		sbc_serial0: serial@9530000 {
-			status = "okay";
-		};
-
-		pwm0: pwm@9810000 {
-			status = "okay";
-		};
-
-		pwm1: pwm@9510000 {
-			status = "okay";
-		};
-
-		ssc2: i2c@9842000 {
-			status = "okay";
-			clock-frequency = <100000>;
-			st,i2c-min-scl-pulse-width-us = <0>;
-			st,i2c-min-sda-pulse-width-us = <5>;
-		};
-
-		ssc3: i2c@9843000 {
-			status = "okay";
-			clock-frequency = <100000>;
-			st,i2c-min-scl-pulse-width-us = <0>;
-			st,i2c-min-sda-pulse-width-us = <5>;
-		};
-
-		i2c@9844000 {
-			status = "okay";
-		};
-
-		i2c@9845000 {
-			status = "okay";
-		};
-
-		i2c@9540000 {
-			status = "okay";
-		};
-
-		mmc0: sdhci@9060000 {
-			non-removable;
-			status = "okay";
-		};
-
-		mmc1: sdhci@9080000 {
-			status = "okay";
-		};
-
-		/* SSC11 to HDMI */
-		hdmiddc: i2c@9541000 {
-			status = "okay";
-			/* HDMI V1.3a supports Standard mode only */
-			clock-frequency = <100000>;
-			st,i2c-min-scl-pulse-width-us = <0>;
-			st,i2c-min-sda-pulse-width-us = <5>;
-		};
-
-		st_dwc3: dwc3@8f94000 {
-			status = "okay";
-		};
-
-		ethernet0: dwmac@9630000 {
-			st,tx-retime-src = "clkgen";
-			status = "okay";
-			phy-mode = "rgmii";
-			fixed-link = <0 1 1000 0 0>;
-		};
-
-		demux@8a20000 {
-			compatible	= "st,stih407-c8sectpfe";
-			status		= "okay";
-			reg		= <0x08a20000 0x10000>,
-					  <0x08a00000 0x4000>;
-			reg-names	= "c8sectpfe", "c8sectpfe-ram";
-			interrupts	= <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>,
-					  <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names	= "c8sectpfe-error-irq",
-					  "c8sectpfe-idle-irq";
-			pinctrl-0	= <&pinctrl_tsin0_serial>;
-			pinctrl-1	= <&pinctrl_tsin0_parallel>;
-			pinctrl-2	= <&pinctrl_tsin3_serial>;
-			pinctrl-3	= <&pinctrl_tsin4_serial_alt3>;
-			pinctrl-4	= <&pinctrl_tsin5_serial_alt1>;
-			pinctrl-names	= "tsin0-serial",
-					  "tsin0-parallel",
-					  "tsin3-serial",
-					  "tsin4-serial",
-					  "tsin5-serial";
-			clocks		= <&clk_s_c0_flexgen CLK_PROC_STFE>;
-			clock-names	= "c8sectpfe";
-
-			/* tsin0 is TSA on NIMA */
-			tsin0: port {
-				tsin-num = <0>;
-				serial-not-parallel;
-				i2c-bus = <&ssc2>;
-				reset-gpios = <&pio15 4 GPIO_ACTIVE_LOW>;
-				dvb-card = <STV0367_TDA18212_NIMA_1>;
-			};
-		};
-
-		sti_uni_player0: sti-uni-player@8d80000 {
-			status = "okay";
-		};
-
-		sti_uni_player2: sti-uni-player@8d82000 {
-			status = "okay";
-		};
-
-		sti_uni_player3: sti-uni-player@8d85000 {
-			status = "okay";
-		};
-
-		syscfg_core: core-syscfg@92b0000 {
-			sti_sasg_codec: sti-sasg-codec {
-				status = "okay";
-				pinctrl-names = "default";
-				pinctrl-0 = <&pinctrl_spdif_out>;
-			};
-		};
-	};
-};
diff --git a/arch/arm/boot/dts/st/stm32mp131.dtsi b/arch/arm/boot/dts/st/stm32mp131.dtsi
index ace9495b9b06..fd730aa37c22 100644
--- a/arch/arm/boot/dts/st/stm32mp131.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp131.dtsi
@@ -954,6 +954,13 @@
 			status = "disabled";
 		};
 
+		hdp: pinctrl@5002a000 {
+			compatible = "st,stm32mp131-hdp";
+			reg = <0x5002a000 0x400>;
+			clocks = <&rcc HDP>;
+			status = "disabled";
+		};
+
 		mdma: dma-controller@58000000 {
 			compatible = "st,stm32h7-mdma";
 			reg = <0x58000000 0x1000>;
@@ -1602,11 +1609,13 @@
 					      "mac-clk-tx",
 					      "mac-clk-rx",
 					      "ethstp",
+					      "ptp_ref",
 					      "eth-ck";
 				clocks = <&rcc ETH1MAC>,
 					 <&rcc ETH1TX>,
 					 <&rcc ETH1RX>,
 					 <&rcc ETH1STP>,
+					 <&rcc ETH1PTP_K>,
 					 <&rcc ETH1CK_K>;
 				st,syscon = <&syscfg 0x4 0xff0000>;
 				snps,mixed-burst;
diff --git a/arch/arm/boot/dts/st/stm32mp133.dtsi b/arch/arm/boot/dts/st/stm32mp133.dtsi
index 49583137b597..053fc6691205 100644
--- a/arch/arm/boot/dts/st/stm32mp133.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp133.dtsi
@@ -81,11 +81,13 @@
 			      "mac-clk-tx",
 			      "mac-clk-rx",
 			      "ethstp",
+			      "ptp_ref",
 			      "eth-ck";
 		clocks = <&rcc ETH2MAC>,
 			 <&rcc ETH2TX>,
 			 <&rcc ETH2RX>,
 			 <&rcc ETH2STP>,
+			 <&rcc ETH2PTP_K>,
 			 <&rcc ETH2CK_K>;
 		st,syscon = <&syscfg 0x4 0xff000000>;
 		snps,mixed-burst;
diff --git a/arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi b/arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi
index 40605ea85ee1..8613a6a17ee9 100644
--- a/arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15-pinctrl.dtsi
@@ -5,6 +5,14 @@
  */
 #include <dt-bindings/pinctrl/stm32-pinfunc.h>
 
+&hdp {
+	/omit-if-no-ref/
+	hdp2_gpo: hdp2-pins {
+		function = "gpoval2";
+		pins = "HDP2";
+	};
+};
+
 &pinctrl {
 	/omit-if-no-ref/
 	adc1_ain_pins_a: adc1-ain-0 {
@@ -732,6 +740,23 @@
 	};
 
 	/omit-if-no-ref/
+	hdp2_pins_a: hdp2-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 13, AF0)>; /* HDP2 */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+	};
+
+	/omit-if-no-ref/
+	hdp2_sleep_pins_a: hdp2-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('E', 13, ANALOG)>; /* HDP2 */
+		};
+	};
+
+	/omit-if-no-ref/
 	i2c1_pins_a: i2c1-0 {
 		pins {
 			pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */
@@ -1305,6 +1330,20 @@
 	};
 
 	/omit-if-no-ref/
+	m4_leds_orange_pins_a: m4-leds-orange-0 {
+		pins {
+			pinmux = <STM32_PINMUX('H', 7, RSVD)>;
+		};
+	};
+
+	/omit-if-no-ref/
+	m4_leds_orange_pins_b: m4-leds-orange-1 {
+		pins {
+			pinmux = <STM32_PINMUX('D', 8, RSVD)>;
+		};
+	};
+
+	/omit-if-no-ref/
 	mco1_pins_a: mco1-0 {
 		pins {
 			pinmux = <STM32_PINMUX('A', 13, AF2)>; /* MCO1 */
diff --git a/arch/arm/boot/dts/st/stm32mp151.dtsi b/arch/arm/boot/dts/st/stm32mp151.dtsi
index 0daa8ffe2ff5..b1b568dfd126 100644
--- a/arch/arm/boot/dts/st/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp151.dtsi
@@ -270,6 +270,13 @@
 			status = "disabled";
 		};
 
+		hdp: pinctrl@5002a000 {
+			compatible = "st,stm32mp151-hdp";
+			reg = <0x5002a000 0x400>;
+			clocks = <&rcc HDP>;
+			status = "disabled";
+		};
+
 		mdma1: dma-controller@58000000 {
 			compatible = "st,stm32h7-mdma";
 			reg = <0x58000000 0x1000>;
diff --git a/arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts b/arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts
index 39a3211c6133..5d219a448763 100644
--- a/arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts
+++ b/arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts
@@ -239,7 +239,7 @@
 
 	i2s1_port: port {
 		i2s1_endpoint: endpoint {
-			format = "i2s";
+			dai-format = "i2s";
 			mclk-fs = <256>;
 			remote-endpoint = <&codec_endpoint>;
 		};
@@ -255,7 +255,7 @@
 	/delete-property/ st,syscfg-holdboot;
 	resets = <&scmi_reset RST_SCMI_MCU>,
 		 <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>;
-	reset-names =  "mcu_rst", "hold_boot";
+	reset-names = "mcu_rst", "hold_boot";
 };
 
 &mdma1 {
diff --git a/arch/arm/boot/dts/st/stm32mp153.dtsi b/arch/arm/boot/dts/st/stm32mp153.dtsi
index 4640dafb1598..92794b942ab2 100644
--- a/arch/arm/boot/dts/st/stm32mp153.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp153.dtsi
@@ -40,6 +40,7 @@
 		interrupt-names = "int0", "int1";
 		clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
 		clock-names = "hclk", "cclk";
+		resets = <&rcc FDCAN_R>;
 		bosch,mram-cfg = <0x0 0 0 32 0 0 2 2>;
 		access-controllers = <&etzpc 62>;
 		status = "disabled";
@@ -54,6 +55,7 @@
 		interrupt-names = "int0", "int1";
 		clocks = <&rcc CK_HSE>, <&rcc FDCAN_K>;
 		clock-names = "hclk", "cclk";
+		resets = <&rcc FDCAN_R>;
 		bosch,mram-cfg = <0x1400 0 0 32 0 0 2 2>;
 		access-controllers = <&etzpc 62>;
 		status = "disabled";
diff --git a/arch/arm/boot/dts/st/stm32mp157c-dk2.dts b/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
index 1b34fbe10b4f..1ec3b8f2faa9 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-dk2.dts
@@ -45,7 +45,6 @@
 		reg = <0>;
 		reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>;
 		power-supply = <&v3v3>;
-		status = "okay";
 
 		port {
 			panel_in: endpoint {
@@ -63,6 +62,12 @@
 	remote-endpoint = <&panel_in>;
 };
 
+&hdp {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&hdp2_gpo &hdp2_pins_a>;
+	pinctrl-1 = <&hdp2_sleep_pins_a>;
+};
+
 &i2c1 {
 	touchscreen@38 {
 		compatible = "focaltech,ft6236";
@@ -71,7 +76,6 @@
 		interrupt-parent = <&gpiof>;
 		touchscreen-size-x = <480>;
 		touchscreen-size-y = <800>;
-		status = "okay";
 	};
 };
 
diff --git a/arch/arm/boot/dts/st/stm32mp157c-ed1.dts b/arch/arm/boot/dts/st/stm32mp157c-ed1.dts
index 9cf5ed111b52..f6c478dbd041 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-ed1.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-ed1.dts
@@ -328,6 +328,8 @@
 			<&vdev0vring1>, <&vdev0buffer>;
 	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>;
 	mbox-names = "vq0", "vq1", "shutdown", "detach";
+	pinctrl-names = "default";
+	pinctrl-0 = <&m4_leds_orange_pins_b>;
 	interrupt-parent = <&exti>;
 	interrupts = <68 1>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/st/stm32mp157c-ultra-fly-sbc.dts b/arch/arm/boot/dts/st/stm32mp157c-ultra-fly-sbc.dts
index ac42d462d449..2531f4bc8ca4 100644
--- a/arch/arm/boot/dts/st/stm32mp157c-ultra-fly-sbc.dts
+++ b/arch/arm/boot/dts/st/stm32mp157c-ultra-fly-sbc.dts
@@ -92,7 +92,7 @@
 	leds: leds {
 		compatible = "gpio-leds";
 
-		led0{
+		led0 {
 			label = "buzzer";
 			gpios = <&gpiof 2 GPIO_ACTIVE_HIGH>;
 			default-state = "off";
diff --git a/arch/arm/boot/dts/st/stm32mp157f-dk2.dts b/arch/arm/boot/dts/st/stm32mp157f-dk2.dts
index 43375c4d62a3..8fa61e54d026 100644
--- a/arch/arm/boot/dts/st/stm32mp157f-dk2.dts
+++ b/arch/arm/boot/dts/st/stm32mp157f-dk2.dts
@@ -51,7 +51,6 @@
 		reg = <0>;
 		reset-gpios = <&gpioe 4 GPIO_ACTIVE_LOW>;
 		power-supply = <&scmi_v3v3>;
-		status = "okay";
 
 		port {
 			panel_in: endpoint {
@@ -77,7 +76,6 @@
 		interrupt-parent = <&gpiof>;
 		touchscreen-size-x = <480>;
 		touchscreen-size-y = <800>;
-		status = "okay";
 	};
 };
 
diff --git a/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi b/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi
index be0c355d3105..154698f87b0e 100644
--- a/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xc-lxa-tac.dtsi
@@ -262,7 +262,7 @@ baseboard_eeprom: &sip_eeprom {
 	status = "okay";
 
 	usbhub: usbhub@2c {
-		compatible ="microchip,usb2514b";
+		compatible = "microchip,usb2514b";
 		reg = <0x2c>;
 		vdd-supply = <&v3v3>;
 		reset-gpios = <&gpiob 6 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi
index abe2dfe70636..52c4e69597a4 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-drc02.dtsi
@@ -62,7 +62,6 @@
 	pinctrl-0 = <&i2c2_pins_a>;
 	i2c-scl-rising-time-ns = <185>;
 	i2c-scl-falling-time-ns = <20>;
-	status = "okay";
 	/* spare dmas for other usage */
 	/delete-property/dmas;
 	/delete-property/dma-names;
diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi
index 0fb4e55843b9..5c77202ee196 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-pdk2.dtsi
@@ -20,7 +20,6 @@
 		default-brightness-level = <8>;
 		enable-gpios = <&gpioi 0 GPIO_ACTIVE_HIGH>;
 		power-supply = <&reg_panel_bl>;
-		status = "okay";
 	};
 
 	gpio-keys-polled {
@@ -135,7 +134,6 @@
 			  "MIC_IN", "Microphone Jack",
 			  "Microphone Jack", "Mic Bias";
 		dais = <&sai2a_port &sai2b_port>;
-		status = "okay";
 	};
 };
 
@@ -150,7 +148,6 @@
 	pinctrl-0 = <&i2c2_pins_a>;
 	i2c-scl-rising-time-ns = <185>;
 	i2c-scl-falling-time-ns = <20>;
-	status = "okay";
 	/* spare dmas for other usage */
 	/delete-property/dmas;
 	/delete-property/dma-names;
diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi
index 142d4a8731f8..4cc633683c6b 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dhcom-som.dtsi
@@ -269,7 +269,6 @@
 		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
-		status = "okay";
 
 		regulators {
 			compatible = "st,stpmic1-regulators";
@@ -388,7 +387,6 @@
 			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 0>;
 			interrupt-names = "onkey-falling", "onkey-rising";
 			power-off-time-sec = <10>;
-			status = "okay";
 		};
 
 		watchdog {
diff --git a/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi b/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi
index 46692d8f566a..8cea6facd27b 100644
--- a/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp15xx-dkx.dtsi
@@ -479,6 +479,8 @@
 			<&vdev0vring1>, <&vdev0buffer>;
 	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>, <&ipcc 3>;
 	mbox-names = "vq0", "vq1", "shutdown", "detach";
+	pinctrl-names = "default";
+	pinctrl-0 = <&m4_leds_orange_pins_a>;
 	interrupt-parent = <&exti>;
 	interrupts = <68 1>;
 	status = "okay";
diff --git a/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi b/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi
index ae2e8dffbe04..ea47f9960c35 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am335x-baltos.dtsi
@@ -269,7 +269,7 @@
 	vcc7-supply = <&vbat>;
 	vccio-supply = <&vbat>;
 
-	ti,en-ck32k-xtal = <1>;
+	ti,en-ck32k-xtal;
 
 	regulators {
 		vrtc_reg: regulator@0 {
diff --git a/arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts b/arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts
index 06767ea164b5..ece7f7854f6a 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-cm-t335.dts
@@ -483,8 +483,6 @@ status = "okay";
 
 		op-mode = <0>;          /* MCASP_IIS_MODE */
 		tdm-slots = <2>;
-		/* 16 serializers */
-		num-serializer = <16>;
 		serial-dir = <  /* 0: INACTIVE, 1: TX, 2: RX */
 			0 0 2 1 0 0 0 0 0 0 0 0 0 0 0 0
 		>;
diff --git a/arch/arm/boot/dts/ti/omap/am335x-myirtech-myd.dts b/arch/arm/boot/dts/ti/omap/am335x-myirtech-myd.dts
index fd91a3c01a63..06a352f98b22 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-myirtech-myd.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-myirtech-myd.dts
@@ -143,7 +143,7 @@
 
 	sgtl5000: sgtl5000@a {
 		compatible = "fsl,sgtl5000";
-		reg =<0xa>;
+		reg = <0xa>;
 		clocks = <&clk12m>;
 		micbias-resistor-k-ohms = <4>;
 		micbias-voltage-m-volts = <2250>;
@@ -155,7 +155,7 @@
 
 	tda9988: tda9988@70 {
 		compatible = "nxp,tda998x";
-		reg =<0x70>;
+		reg = <0x70>;
 		audio-ports = <TDA998x_I2S 1>;
 
 		#sound-dai-cells = <0>;
diff --git a/arch/arm/boot/dts/ti/omap/am335x-sl50.dts b/arch/arm/boot/dts/ti/omap/am335x-sl50.dts
index 757ebd96b3f0..f3524e5ee43e 100644
--- a/arch/arm/boot/dts/ti/omap/am335x-sl50.dts
+++ b/arch/arm/boot/dts/ti/omap/am335x-sl50.dts
@@ -109,7 +109,7 @@
 		audio_mclk_fixed: oscillator@0 {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
-			clock-frequency  = <24576000>;	/* 24.576MHz */
+			clock-frequency = <24576000>;	/* 24.576MHz */
 		};
 
 		audio_mclk: audio_mclk_gate@0 {
diff --git a/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi b/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi
index d6a143abae5f..18ad52e93955 100644
--- a/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am33xx-l4.dtsi
@@ -200,7 +200,7 @@
 			ranges = <0x0 0x9000 0x1000>;
 
 			uart0: serial@0 {
-				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				compatible = "ti,am3352-uart";
 				clock-frequency = <48000000>;
 				reg = <0x0 0x1000>;
 				interrupts = <72>;
@@ -1108,7 +1108,7 @@
 			ranges = <0x0 0x22000 0x1000>;
 
 			uart1: serial@0 {
-				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				compatible = "ti,am3352-uart";
 				clock-frequency = <48000000>;
 				reg = <0x0 0x1000>;
 				interrupts = <73>;
@@ -1139,7 +1139,7 @@
 			ranges = <0x0 0x24000 0x1000>;
 
 			uart2: serial@0 {
-				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				compatible = "ti,am3352-uart";
 				clock-frequency = <48000000>;
 				reg = <0x0 0x1000>;
 				interrupts = <74>;
@@ -1457,10 +1457,10 @@
 
 			gpio1: gpio@0 {
 				compatible = "ti,omap4-gpio";
-				gpio-ranges =   <&am33xx_pinmux  0  0  8>,
-						<&am33xx_pinmux  8 90  4>,
-						<&am33xx_pinmux 12 12 16>,
-						<&am33xx_pinmux 28 30  4>;
+				gpio-ranges = <&am33xx_pinmux  0  0  8>,
+					      <&am33xx_pinmux  8 90  4>,
+					      <&am33xx_pinmux 12 12 16>,
+					      <&am33xx_pinmux 28 30  4>;
 				gpio-controller;
 				#gpio-cells = <2>;
 				interrupt-controller;
@@ -1770,7 +1770,7 @@
 			ranges = <0x0 0xa6000 0x1000>;
 
 			uart3: serial@0 {
-				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				compatible = "ti,am3352-uart";
 				clock-frequency = <48000000>;
 				reg = <0x0 0x1000>;
 				interrupts = <44>;
@@ -1799,7 +1799,7 @@
 			ranges = <0x0 0xa8000 0x1000>;
 
 			uart4: serial@0 {
-				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				compatible = "ti,am3352-uart";
 				clock-frequency = <48000000>;
 				reg = <0x0 0x1000>;
 				interrupts = <45>;
@@ -1828,7 +1828,7 @@
 			ranges = <0x0 0xaa000 0x1000>;
 
 			uart5: serial@0 {
-				compatible = "ti,am3352-uart", "ti,omap3-uart";
+				compatible = "ti,am3352-uart";
 				clock-frequency = <48000000>;
 				reg = <0x0 0x1000>;
 				interrupts = <46>;
diff --git a/arch/arm/boot/dts/ti/omap/am33xx.dtsi b/arch/arm/boot/dts/ti/omap/am33xx.dtsi
index 0614ffdc1578..43ec2a95f4bb 100644
--- a/arch/arm/boot/dts/ti/omap/am33xx.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am33xx.dtsi
@@ -461,10 +461,10 @@
 
 			cppi41dma: dma-controller@2000 {
 				compatible = "ti,am3359-cppi41";
-				reg =  <0x0000 0x1000>,
-				       <0x2000 0x1000>,
-				       <0x3000 0x1000>,
-				       <0x4000 0x4000>;
+				reg = <0x0000 0x1000>,
+				      <0x2000 0x1000>,
+				      <0x3000 0x1000>,
+				      <0x4000 0x4000>;
 				reg-names = "glue", "controller", "scheduler", "queuemgr";
 				interrupts = <17>;
 				interrupt-names = "glue";
diff --git a/arch/arm/boot/dts/ti/omap/am57xx-beagle-x15-common.dtsi b/arch/arm/boot/dts/ti/omap/am57xx-beagle-x15-common.dtsi
index 994e69ab38d7..87b61a98d5e9 100644
--- a/arch/arm/boot/dts/ti/omap/am57xx-beagle-x15-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/am57xx-beagle-x15-common.dtsi
@@ -149,7 +149,7 @@
 	gpio_fan: gpio_fan {
 		/* Based on 5v 500mA AFB02505HHB */
 		compatible = "gpio-fan";
-		gpios =  <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
+		gpios = <&tps659038_gpio 2 GPIO_ACTIVE_HIGH>;
 		gpio-fan,speed-map = <0     0>,
 				     <13000 1>;
 		#cooling-cells = <2>;
diff --git a/arch/arm/boot/dts/ti/omap/dm814x.dtsi b/arch/arm/boot/dts/ti/omap/dm814x.dtsi
index a8cd724ce4bc..27d1f35a31fd 100644
--- a/arch/arm/boot/dts/ti/omap/dm814x.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dm814x.dtsi
@@ -155,10 +155,10 @@
 
 			cppi41dma: dma-controller@47402000 {
 				compatible = "ti,am3359-cppi41";
-				reg =  <0x47400000 0x1000
-					0x47402000 0x1000
-					0x47403000 0x1000
-					0x47404000 0x4000>;
+				reg = <0x47400000 0x1000>,
+				      <0x47402000 0x1000>,
+				      <0x47403000 0x1000>,
+				      <0x47404000 0x4000>;
 				reg-names = "glue", "controller", "scheduler", "queuemgr";
 				interrupts = <17>;
 				interrupt-names = "glue";
diff --git a/arch/arm/boot/dts/ti/omap/dm816x.dtsi b/arch/arm/boot/dts/ti/omap/dm816x.dtsi
index b68686f0643b..407d7bc5b13a 100644
--- a/arch/arm/boot/dts/ti/omap/dm816x.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dm816x.dtsi
@@ -643,10 +643,10 @@
 
 			cppi41dma: dma-controller@47402000 {
 				compatible = "ti,am3359-cppi41";
-				reg =  <0x47400000 0x1000
-					0x47402000 0x1000
-					0x47403000 0x1000
-					0x47404000 0x4000>;
+				reg = <0x47400000 0x1000>,
+				      <0x47402000 0x1000>,
+				      <0x47403000 0x1000>,
+				      <0x47404000 0x4000>;
 				reg-names = "glue", "controller", "scheduler", "queuemgr";
 				interrupts = <17>;
 				interrupt-names = "glue";
diff --git a/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi b/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi
index ba7fdaae9c6e..c9282f57ffa5 100644
--- a/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi
+++ b/arch/arm/boot/dts/ti/omap/dra7-l4.dtsi
@@ -267,8 +267,8 @@
 					syscon-phy-power = <&scm_conf 0x300>;
 					clocks = <&usb_phy1_always_on_clk32k>,
 						 <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS1_CLKCTRL 8>;
-					clock-names =	"wkupclk",
-							"refclk";
+					clock-names = "wkupclk",
+						      "refclk";
 					#phy-cells = <0>;
 				};
 
@@ -279,8 +279,8 @@
 					syscon-phy-power = <&scm_conf 0xe74>;
 					clocks = <&usb_phy2_always_on_clk32k>,
 						 <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS2_CLKCTRL 8>;
-					clock-names =	"wkupclk",
-							"refclk";
+					clock-names = "wkupclk",
+						      "refclk";
 					#phy-cells = <0>;
 				};
 
@@ -294,9 +294,9 @@
 					clocks = <&usb_phy3_always_on_clk32k>,
 						 <&sys_clkin1>,
 						 <&l3init_clkctrl DRA7_L3INIT_USB_OTG_SS1_CLKCTRL 8>;
-					clock-names =	"wkupclk",
-							"sysclk",
-							"refclk";
+					clock-names = "wkupclk",
+						      "sysclk",
+						      "refclk";
 					#phy-cells = <0>;
 				};
 			};
diff --git a/arch/arm/boot/dts/ti/omap/dra71-evm.dts b/arch/arm/boot/dts/ti/omap/dra71-evm.dts
index f747ac56eb92..1d2df8128cfe 100644
--- a/arch/arm/boot/dts/ti/omap/dra71-evm.dts
+++ b/arch/arm/boot/dts/ti/omap/dra71-evm.dts
@@ -83,10 +83,10 @@
 		compatible = "ti,lp8733";
 		reg = <0x60>;
 
-		buck0-in-supply =<&vsys_3v3>;
-		buck1-in-supply =<&vsys_3v3>;
-		ldo0-in-supply =<&evm_5v0>;
-		ldo1-in-supply =<&evm_5v0>;
+		buck0-in-supply = <&vsys_3v3>;
+		buck1-in-supply = <&vsys_3v3>;
+		ldo0-in-supply = <&evm_5v0>;
+		ldo1-in-supply = <&evm_5v0>;
 
 		lp8733_regulators: regulators {
 			lp8733_buck0_reg: buck0 {
@@ -131,10 +131,10 @@
 		compatible = "ti,lp8732";
 		reg = <0x61>;
 
-		buck0-in-supply =<&vsys_3v3>;
-		buck1-in-supply =<&vsys_3v3>;
-		ldo0-in-supply =<&vsys_3v3>;
-		ldo1-in-supply =<&vsys_3v3>;
+		buck0-in-supply = <&vsys_3v3>;
+		buck1-in-supply = <&vsys_3v3>;
+		ldo0-in-supply = <&vsys_3v3>;
+		ldo1-in-supply = <&vsys_3v3>;
 
 		lp8732_regulators: regulators {
 			lp8732_buck0_reg: buck0 {
diff --git a/arch/arm/boot/dts/ti/omap/omap3-devkit8000-common.dtsi b/arch/arm/boot/dts/ti/omap/omap3-devkit8000-common.dtsi
index 07d5894ebb74..910e3b54f530 100644
--- a/arch/arm/boot/dts/ti/omap/omap3-devkit8000-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-devkit8000-common.dtsi
@@ -275,8 +275,8 @@
 
 	ethernet@6,0 {
 		compatible = "davicom,dm9000";
-		reg =  <6 0x000 2>,
-		       <6 0x400 2>; /* CS6, offset 0 and 0x400, IO size 2 */
+		reg = <6 0x000 2>,
+		      <6 0x400 2>; /* CS6, offset 0 and 0x400, IO size 2 */
 		bank-width = <2>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <25 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd-common.dtsi b/arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd-common.dtsi
index a7f99ae0c1fe..78c657429f64 100644
--- a/arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd-common.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap3-devkit8000-lcd-common.dtsi
@@ -65,7 +65,7 @@
 		ti,debounce-max = /bits/ 16 <10>;
 		ti,debounce-tol = /bits/ 16 <5>;
 		ti,debounce-rep = /bits/ 16 <1>;
-		ti,keep-vref-on = <1>;
+		ti,keep-vref-on;
 		ti,settle-delay-usec = /bits/ 16 <150>;
 
 		wakeup-source;
diff --git a/arch/arm/boot/dts/ti/omap/omap3-sbc-t3517.dts b/arch/arm/boot/dts/ti/omap/omap3-sbc-t3517.dts
index 07bec48dc441..959fdeeb769e 100644
--- a/arch/arm/boot/dts/ti/omap/omap3-sbc-t3517.dts
+++ b/arch/arm/boot/dts/ti/omap/omap3-sbc-t3517.dts
@@ -57,8 +57,8 @@
 		&mmc1_aux_pins
 	>;
 
-	wp-gpios =  <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio_59  */
-	cd-gpios =  <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */
+	wp-gpios = <&gpio2 27 GPIO_ACTIVE_HIGH>; /* gpio_59  */
+	cd-gpios = <&gpio5 16 GPIO_ACTIVE_HIGH>; /* gpio_144 */
 };
 
 &dss {
diff --git a/arch/arm/boot/dts/ti/omap/omap4-sdp.dts b/arch/arm/boot/dts/ti/omap/omap4-sdp.dts
index b535d24c6140..b550105585a1 100644
--- a/arch/arm/boot/dts/ti/omap/omap4-sdp.dts
+++ b/arch/arm/boot/dts/ti/omap/omap4-sdp.dts
@@ -467,7 +467,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcspi1_pins>;
 
-	eth@0 {
+	ethernet@0 {
 		pinctrl-names = "default";
 		pinctrl-0 = <&ks8851_pins>;
 
diff --git a/arch/arm/boot/dts/ti/omap/omap4-var-om44customboard.dtsi b/arch/arm/boot/dts/ti/omap/omap4-var-om44customboard.dtsi
index cadc7e02592b..80e89a2f8be1 100644
--- a/arch/arm/boot/dts/ti/omap/omap4-var-om44customboard.dtsi
+++ b/arch/arm/boot/dts/ti/omap/omap4-var-om44customboard.dtsi
@@ -194,7 +194,7 @@
 	pinctrl-0 = <&mcspi1_pins>;
 	status = "okay";
 
-	eth@0 {
+	ethernet@0 {
 		compatible = "ks8851";
 		pinctrl-names = "default";
 		pinctrl-0 = <&ks8851_irq_pins>;
diff --git a/arch/arm/configs/exynos_defconfig b/arch/arm/configs/exynos_defconfig
index 6915c766923a..84070e9698e8 100644
--- a/arch/arm/configs/exynos_defconfig
+++ b/arch/arm/configs/exynos_defconfig
@@ -364,7 +364,6 @@ CONFIG_CRYPTO_USER_API_SKCIPHER=m
 CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 CONFIG_CRYPTO_AES_ARM_BS=m
-CONFIG_CRYPTO_CHACHA20_NEON=m
 CONFIG_CRYPTO_DEV_EXYNOS_RNG=y
 CONFIG_CRYPTO_DEV_S5P=y
 CONFIG_DMA_CMA=y
diff --git a/arch/arm/configs/milbeaut_m10v_defconfig b/arch/arm/configs/milbeaut_m10v_defconfig
index a3be0b2ede09..a2995eb390c6 100644
--- a/arch/arm/configs/milbeaut_m10v_defconfig
+++ b/arch/arm/configs/milbeaut_m10v_defconfig
@@ -101,7 +101,6 @@ CONFIG_CRYPTO_GHASH_ARM_CE=m
 CONFIG_CRYPTO_AES_ARM=m
 CONFIG_CRYPTO_AES_ARM_BS=m
 CONFIG_CRYPTO_AES_ARM_CE=m
-CONFIG_CRYPTO_CHACHA20_NEON=m
 # CONFIG_CRYPTO_HW is not set
 CONFIG_DMA_CMA=y
 CONFIG_CMA_SIZE_MBYTES=64
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index f2822eeefb95..12f706e2ded5 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -87,10 +87,6 @@ CONFIG_SOC_AM33XX=y
 CONFIG_SOC_AM43XX=y
 CONFIG_SOC_DRA7XX=y
 CONFIG_ARCH_QCOM=y
-CONFIG_ARCH_MSM8X60=y
-CONFIG_ARCH_MSM8916=y
-CONFIG_ARCH_MSM8960=y
-CONFIG_ARCH_MSM8974=y
 CONFIG_ARCH_ROCKCHIP=y
 CONFIG_ARCH_RENESAS=y
 CONFIG_ARCH_INTEL_SOCFPGA=y
@@ -1291,7 +1287,6 @@ CONFIG_CRYPTO_GHASH_ARM_CE=m
 CONFIG_CRYPTO_AES_ARM=m
 CONFIG_CRYPTO_AES_ARM_BS=m
 CONFIG_CRYPTO_AES_ARM_CE=m
-CONFIG_CRYPTO_CHACHA20_NEON=m
 CONFIG_CRYPTO_DEV_SUN4I_SS=m
 CONFIG_CRYPTO_DEV_FSL_CAAM=m
 CONFIG_CRYPTO_DEV_EXYNOS_RNG=m
diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig
index 939913ed9a73..1d5f75241739 100644
--- a/arch/arm/configs/omap2plus_defconfig
+++ b/arch/arm/configs/omap2plus_defconfig
@@ -708,7 +708,6 @@ CONFIG_CRYPTO_MICHAEL_MIC=y
 CONFIG_CRYPTO_GHASH_ARM_CE=m
 CONFIG_CRYPTO_AES_ARM=m
 CONFIG_CRYPTO_AES_ARM_BS=m
-CONFIG_CRYPTO_CHACHA20_NEON=m
 CONFIG_CRYPTO_DEV_OMAP=m
 CONFIG_CRYPTO_DEV_OMAP_SHAM=m
 CONFIG_CRYPTO_DEV_OMAP_AES=m
diff --git a/arch/arm/configs/pxa_defconfig b/arch/arm/configs/pxa_defconfig
index 1a80602c1284..70489f3555d0 100644
--- a/arch/arm/configs/pxa_defconfig
+++ b/arch/arm/configs/pxa_defconfig
@@ -498,7 +498,6 @@ CONFIG_USB_LEGOTOWER=m
 CONFIG_USB_LCD=m
 CONFIG_USB_CYTHERM=m
 CONFIG_USB_IDMOUSE=m
-CONFIG_USB_GPIO_VBUS=y
 CONFIG_USB_GPIO_VBUS=m
 CONFIG_USB_ISP1301=m
 CONFIG_USB_GADGET=m
diff --git a/arch/arm/configs/qcom_defconfig b/arch/arm/configs/qcom_defconfig
index ec52ccece0ca..fa681a7a49c2 100644
--- a/arch/arm/configs/qcom_defconfig
+++ b/arch/arm/configs/qcom_defconfig
@@ -10,9 +10,6 @@ CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_PROFILING=y
 CONFIG_ARCH_QCOM=y
-CONFIG_ARCH_MSM8X60=y
-CONFIG_ARCH_MSM8960=y
-CONFIG_ARCH_MSM8974=y
 CONFIG_ARCH_MDM9615=y
 CONFIG_SMP=y
 CONFIG_ARM_PSCI=y
@@ -187,7 +184,6 @@ CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_OTG=y
 CONFIG_USB_MON=y
 CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_MSM=y
 CONFIG_USB_ACM=y
 CONFIG_USB_DWC3=y
 CONFIG_USB_CHIPIDEA=y
diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig
index a37e6ac40825..967b1cb22136 100644
--- a/arch/arm/configs/s3c6400_defconfig
+++ b/arch/arm/configs/s3c6400_defconfig
@@ -11,7 +11,6 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
-CONFIG_MTD_NAND_S3C2410=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_EEPROM_AT24=y
diff --git a/arch/arm/configs/u8500_defconfig b/arch/arm/configs/u8500_defconfig
index 0f55815eecb3..9c8dc6dd5fe3 100644
--- a/arch/arm/configs/u8500_defconfig
+++ b/arch/arm/configs/u8500_defconfig
@@ -40,7 +40,7 @@ CONFIG_MAC80211_LEDS=y
 CONFIG_CAIF=y
 CONFIG_NFC=m
 CONFIG_NFC_HCI=m
-CONFIG_NFC_SHDLC=m
+CONFIG_NFC_SHDLC=y
 CONFIG_NFC_PN544_I2C=m
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
diff --git a/arch/arm/crypto/Kconfig b/arch/arm/crypto/Kconfig
index 1e5f3cdf691c..c436eec22d86 100644
--- a/arch/arm/crypto/Kconfig
+++ b/arch/arm/crypto/Kconfig
@@ -2,19 +2,6 @@
 
 menu "Accelerated Cryptographic Algorithms for CPU (arm)"
 
-config CRYPTO_CURVE25519_NEON
-	tristate
-	depends on KERNEL_MODE_NEON
-	select CRYPTO_KPP
-	select CRYPTO_LIB_CURVE25519_GENERIC
-	select CRYPTO_ARCH_HAVE_LIB_CURVE25519
-	default CRYPTO_LIB_CURVE25519_INTERNAL
-	help
-	  Curve25519 algorithm
-
-	  Architecture: arm with
-	  - NEON (Advanced SIMD) extensions
-
 config CRYPTO_GHASH_ARM_CE
 	tristate "Hash functions: GHASH (PMULL/NEON/ARMv8 Crypto Extensions)"
 	depends on KERNEL_MODE_NEON
diff --git a/arch/arm/crypto/Makefile b/arch/arm/crypto/Makefile
index 4f23999ae17d..6346a73effc0 100644
--- a/arch/arm/crypto/Makefile
+++ b/arch/arm/crypto/Makefile
@@ -7,7 +7,6 @@ obj-$(CONFIG_CRYPTO_AES_ARM) += aes-arm.o
 obj-$(CONFIG_CRYPTO_AES_ARM_BS) += aes-arm-bs.o
 obj-$(CONFIG_CRYPTO_BLAKE2B_NEON) += blake2b-neon.o
 obj-$(CONFIG_CRYPTO_NHPOLY1305_NEON) += nhpoly1305-neon.o
-obj-$(CONFIG_CRYPTO_CURVE25519_NEON) += curve25519-neon.o
 
 obj-$(CONFIG_CRYPTO_AES_ARM_CE) += aes-arm-ce.o
 obj-$(CONFIG_CRYPTO_GHASH_ARM_CE) += ghash-arm-ce.o
@@ -18,4 +17,3 @@ blake2b-neon-y  := blake2b-neon-core.o blake2b-neon-glue.o
 aes-arm-ce-y	:= aes-ce-core.o aes-ce-glue.o
 ghash-arm-ce-y	:= ghash-ce-core.o ghash-ce-glue.o
 nhpoly1305-neon-y := nh-neon-core.o nhpoly1305-neon-glue.o
-curve25519-neon-y := curve25519-core.o curve25519-glue.o
diff --git a/arch/arm/crypto/curve25519-core.S b/arch/arm/crypto/curve25519-core.S
deleted file mode 100644
index b697fa5d059a..000000000000
--- a/arch/arm/crypto/curve25519-core.S
+++ /dev/null
@@ -1,2062 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 OR MIT */
-/*
- * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
- *
- * Based on public domain code from Daniel J. Bernstein and Peter Schwabe. This
- * began from SUPERCOP's curve25519/neon2/scalarmult.s, but has subsequently been
- * manually reworked for use in kernel space.
- */
-
-#include <linux/linkage.h>
-
-.text
-.arch armv7-a
-.fpu neon
-.align 4
-
-ENTRY(curve25519_neon)
-	push		{r4-r11, lr}
-	mov		ip, sp
-	sub		r3, sp, #704
-	and		r3, r3, #0xfffffff0
-	mov		sp, r3
-	movw		r4, #0
-	movw		r5, #254
-	vmov.i32	q0, #1
-	vshr.u64	q1, q0, #7
-	vshr.u64	q0, q0, #8
-	vmov.i32	d4, #19
-	vmov.i32	d5, #38
-	add		r6, sp, #480
-	vst1.8		{d2-d3}, [r6, : 128]!
-	vst1.8		{d0-d1}, [r6, : 128]!
-	vst1.8		{d4-d5}, [r6, : 128]
-	add		r6, r3, #0
-	vmov.i32	q2, #0
-	vst1.8		{d4-d5}, [r6, : 128]!
-	vst1.8		{d4-d5}, [r6, : 128]!
-	vst1.8		d4, [r6, : 64]
-	add		r6, r3, #0
-	movw		r7, #960
-	sub		r7, r7, #2
-	neg		r7, r7
-	sub		r7, r7, r7, LSL #7
-	str		r7, [r6]
-	add		r6, sp, #672
-	vld1.8		{d4-d5}, [r1]!
-	vld1.8		{d6-d7}, [r1]
-	vst1.8		{d4-d5}, [r6, : 128]!
-	vst1.8		{d6-d7}, [r6, : 128]
-	sub		r1, r6, #16
-	ldrb		r6, [r1]
-	and		r6, r6, #248
-	strb		r6, [r1]
-	ldrb		r6, [r1, #31]
-	and		r6, r6, #127
-	orr		r6, r6, #64
-	strb		r6, [r1, #31]
-	vmov.i64	q2, #0xffffffff
-	vshr.u64	q3, q2, #7
-	vshr.u64	q2, q2, #6
-	vld1.8		{d8}, [r2]
-	vld1.8		{d10}, [r2]
-	add		r2, r2, #6
-	vld1.8		{d12}, [r2]
-	vld1.8		{d14}, [r2]
-	add		r2, r2, #6
-	vld1.8		{d16}, [r2]
-	add		r2, r2, #4
-	vld1.8		{d18}, [r2]
-	vld1.8		{d20}, [r2]
-	add		r2, r2, #6
-	vld1.8		{d22}, [r2]
-	add		r2, r2, #2
-	vld1.8		{d24}, [r2]
-	vld1.8		{d26}, [r2]
-	vshr.u64	q5, q5, #26
-	vshr.u64	q6, q6, #3
-	vshr.u64	q7, q7, #29
-	vshr.u64	q8, q8, #6
-	vshr.u64	q10, q10, #25
-	vshr.u64	q11, q11, #3
-	vshr.u64	q12, q12, #12
-	vshr.u64	q13, q13, #38
-	vand		q4, q4, q2
-	vand		q6, q6, q2
-	vand		q8, q8, q2
-	vand		q10, q10, q2
-	vand		q2, q12, q2
-	vand		q5, q5, q3
-	vand		q7, q7, q3
-	vand		q9, q9, q3
-	vand		q11, q11, q3
-	vand		q3, q13, q3
-	add		r2, r3, #48
-	vadd.i64	q12, q4, q1
-	vadd.i64	q13, q10, q1
-	vshr.s64	q12, q12, #26
-	vshr.s64	q13, q13, #26
-	vadd.i64	q5, q5, q12
-	vshl.i64	q12, q12, #26
-	vadd.i64	q14, q5, q0
-	vadd.i64	q11, q11, q13
-	vshl.i64	q13, q13, #26
-	vadd.i64	q15, q11, q0
-	vsub.i64	q4, q4, q12
-	vshr.s64	q12, q14, #25
-	vsub.i64	q10, q10, q13
-	vshr.s64	q13, q15, #25
-	vadd.i64	q6, q6, q12
-	vshl.i64	q12, q12, #25
-	vadd.i64	q14, q6, q1
-	vadd.i64	q2, q2, q13
-	vsub.i64	q5, q5, q12
-	vshr.s64	q12, q14, #26
-	vshl.i64	q13, q13, #25
-	vadd.i64	q14, q2, q1
-	vadd.i64	q7, q7, q12
-	vshl.i64	q12, q12, #26
-	vadd.i64	q15, q7, q0
-	vsub.i64	q11, q11, q13
-	vshr.s64	q13, q14, #26
-	vsub.i64	q6, q6, q12
-	vshr.s64	q12, q15, #25
-	vadd.i64	q3, q3, q13
-	vshl.i64	q13, q13, #26
-	vadd.i64	q14, q3, q0
-	vadd.i64	q8, q8, q12
-	vshl.i64	q12, q12, #25
-	vadd.i64	q15, q8, q1
-	add		r2, r2, #8
-	vsub.i64	q2, q2, q13
-	vshr.s64	q13, q14, #25
-	vsub.i64	q7, q7, q12
-	vshr.s64	q12, q15, #26
-	vadd.i64	q14, q13, q13
-	vadd.i64	q9, q9, q12
-	vtrn.32		d12, d14
-	vshl.i64	q12, q12, #26
-	vtrn.32		d13, d15
-	vadd.i64	q0, q9, q0
-	vadd.i64	q4, q4, q14
-	vst1.8		d12, [r2, : 64]!
-	vshl.i64	q6, q13, #4
-	vsub.i64	q7, q8, q12
-	vshr.s64	q0, q0, #25
-	vadd.i64	q4, q4, q6
-	vadd.i64	q6, q10, q0
-	vshl.i64	q0, q0, #25
-	vadd.i64	q8, q6, q1
-	vadd.i64	q4, q4, q13
-	vshl.i64	q10, q13, #25
-	vadd.i64	q1, q4, q1
-	vsub.i64	q0, q9, q0
-	vshr.s64	q8, q8, #26
-	vsub.i64	q3, q3, q10
-	vtrn.32		d14, d0
-	vshr.s64	q1, q1, #26
-	vtrn.32		d15, d1
-	vadd.i64	q0, q11, q8
-	vst1.8		d14, [r2, : 64]
-	vshl.i64	q7, q8, #26
-	vadd.i64	q5, q5, q1
-	vtrn.32		d4, d6
-	vshl.i64	q1, q1, #26
-	vtrn.32		d5, d7
-	vsub.i64	q3, q6, q7
-	add		r2, r2, #16
-	vsub.i64	q1, q4, q1
-	vst1.8		d4, [r2, : 64]
-	vtrn.32		d6, d0
-	vtrn.32		d7, d1
-	sub		r2, r2, #8
-	vtrn.32		d2, d10
-	vtrn.32		d3, d11
-	vst1.8		d6, [r2, : 64]
-	sub		r2, r2, #24
-	vst1.8		d2, [r2, : 64]
-	add		r2, r3, #96
-	vmov.i32	q0, #0
-	vmov.i64	d2, #0xff
-	vmov.i64	d3, #0
-	vshr.u32	q1, q1, #7
-	vst1.8		{d2-d3}, [r2, : 128]!
-	vst1.8		{d0-d1}, [r2, : 128]!
-	vst1.8		d0, [r2, : 64]
-	add		r2, r3, #144
-	vmov.i32	q0, #0
-	vst1.8		{d0-d1}, [r2, : 128]!
-	vst1.8		{d0-d1}, [r2, : 128]!
-	vst1.8		d0, [r2, : 64]
-	add		r2, r3, #240
-	vmov.i32	q0, #0
-	vmov.i64	d2, #0xff
-	vmov.i64	d3, #0
-	vshr.u32	q1, q1, #7
-	vst1.8		{d2-d3}, [r2, : 128]!
-	vst1.8		{d0-d1}, [r2, : 128]!
-	vst1.8		d0, [r2, : 64]
-	add		r2, r3, #48
-	add		r6, r3, #192
-	vld1.8		{d0-d1}, [r2, : 128]!
-	vld1.8		{d2-d3}, [r2, : 128]!
-	vld1.8		{d4}, [r2, : 64]
-	vst1.8		{d0-d1}, [r6, : 128]!
-	vst1.8		{d2-d3}, [r6, : 128]!
-	vst1.8		d4, [r6, : 64]
-.Lmainloop:
-	mov		r2, r5, LSR #3
-	and		r6, r5, #7
-	ldrb		r2, [r1, r2]
-	mov		r2, r2, LSR r6
-	and		r2, r2, #1
-	str		r5, [sp, #456]
-	eor		r4, r4, r2
-	str		r2, [sp, #460]
-	neg		r2, r4
-	add		r4, r3, #96
-	add		r5, r3, #192
-	add		r6, r3, #144
-	vld1.8		{d8-d9}, [r4, : 128]!
-	add		r7, r3, #240
-	vld1.8		{d10-d11}, [r5, : 128]!
-	veor		q6, q4, q5
-	vld1.8		{d14-d15}, [r6, : 128]!
-	vdup.i32	q8, r2
-	vld1.8		{d18-d19}, [r7, : 128]!
-	veor		q10, q7, q9
-	vld1.8		{d22-d23}, [r4, : 128]!
-	vand		q6, q6, q8
-	vld1.8		{d24-d25}, [r5, : 128]!
-	vand		q10, q10, q8
-	vld1.8		{d26-d27}, [r6, : 128]!
-	veor		q4, q4, q6
-	vld1.8		{d28-d29}, [r7, : 128]!
-	veor		q5, q5, q6
-	vld1.8		{d0}, [r4, : 64]
-	veor		q6, q7, q10
-	vld1.8		{d2}, [r5, : 64]
-	veor		q7, q9, q10
-	vld1.8		{d4}, [r6, : 64]
-	veor		q9, q11, q12
-	vld1.8		{d6}, [r7, : 64]
-	veor		q10, q0, q1
-	sub		r2, r4, #32
-	vand		q9, q9, q8
-	sub		r4, r5, #32
-	vand		q10, q10, q8
-	sub		r5, r6, #32
-	veor		q11, q11, q9
-	sub		r6, r7, #32
-	veor		q0, q0, q10
-	veor		q9, q12, q9
-	veor		q1, q1, q10
-	veor		q10, q13, q14
-	veor		q12, q2, q3
-	vand		q10, q10, q8
-	vand		q8, q12, q8
-	veor		q12, q13, q10
-	veor		q2, q2, q8
-	veor		q10, q14, q10
-	veor		q3, q3, q8
-	vadd.i32	q8, q4, q6
-	vsub.i32	q4, q4, q6
-	vst1.8		{d16-d17}, [r2, : 128]!
-	vadd.i32	q6, q11, q12
-	vst1.8		{d8-d9}, [r5, : 128]!
-	vsub.i32	q4, q11, q12
-	vst1.8		{d12-d13}, [r2, : 128]!
-	vadd.i32	q6, q0, q2
-	vst1.8		{d8-d9}, [r5, : 128]!
-	vsub.i32	q0, q0, q2
-	vst1.8		d12, [r2, : 64]
-	vadd.i32	q2, q5, q7
-	vst1.8		d0, [r5, : 64]
-	vsub.i32	q0, q5, q7
-	vst1.8		{d4-d5}, [r4, : 128]!
-	vadd.i32	q2, q9, q10
-	vst1.8		{d0-d1}, [r6, : 128]!
-	vsub.i32	q0, q9, q10
-	vst1.8		{d4-d5}, [r4, : 128]!
-	vadd.i32	q2, q1, q3
-	vst1.8		{d0-d1}, [r6, : 128]!
-	vsub.i32	q0, q1, q3
-	vst1.8		d4, [r4, : 64]
-	vst1.8		d0, [r6, : 64]
-	add		r2, sp, #512
-	add		r4, r3, #96
-	add		r5, r3, #144
-	vld1.8		{d0-d1}, [r2, : 128]
-	vld1.8		{d2-d3}, [r4, : 128]!
-	vld1.8		{d4-d5}, [r5, : 128]!
-	vzip.i32	q1, q2
-	vld1.8		{d6-d7}, [r4, : 128]!
-	vld1.8		{d8-d9}, [r5, : 128]!
-	vshl.i32	q5, q1, #1
-	vzip.i32	q3, q4
-	vshl.i32	q6, q2, #1
-	vld1.8		{d14}, [r4, : 64]
-	vshl.i32	q8, q3, #1
-	vld1.8		{d15}, [r5, : 64]
-	vshl.i32	q9, q4, #1
-	vmul.i32	d21, d7, d1
-	vtrn.32		d14, d15
-	vmul.i32	q11, q4, q0
-	vmul.i32	q0, q7, q0
-	vmull.s32	q12, d2, d2
-	vmlal.s32	q12, d11, d1
-	vmlal.s32	q12, d12, d0
-	vmlal.s32	q12, d13, d23
-	vmlal.s32	q12, d16, d22
-	vmlal.s32	q12, d7, d21
-	vmull.s32	q10, d2, d11
-	vmlal.s32	q10, d4, d1
-	vmlal.s32	q10, d13, d0
-	vmlal.s32	q10, d6, d23
-	vmlal.s32	q10, d17, d22
-	vmull.s32	q13, d10, d4
-	vmlal.s32	q13, d11, d3
-	vmlal.s32	q13, d13, d1
-	vmlal.s32	q13, d16, d0
-	vmlal.s32	q13, d17, d23
-	vmlal.s32	q13, d8, d22
-	vmull.s32	q1, d10, d5
-	vmlal.s32	q1, d11, d4
-	vmlal.s32	q1, d6, d1
-	vmlal.s32	q1, d17, d0
-	vmlal.s32	q1, d8, d23
-	vmull.s32	q14, d10, d6
-	vmlal.s32	q14, d11, d13
-	vmlal.s32	q14, d4, d4
-	vmlal.s32	q14, d17, d1
-	vmlal.s32	q14, d18, d0
-	vmlal.s32	q14, d9, d23
-	vmull.s32	q11, d10, d7
-	vmlal.s32	q11, d11, d6
-	vmlal.s32	q11, d12, d5
-	vmlal.s32	q11, d8, d1
-	vmlal.s32	q11, d19, d0
-	vmull.s32	q15, d10, d8
-	vmlal.s32	q15, d11, d17
-	vmlal.s32	q15, d12, d6
-	vmlal.s32	q15, d13, d5
-	vmlal.s32	q15, d19, d1
-	vmlal.s32	q15, d14, d0
-	vmull.s32	q2, d10, d9
-	vmlal.s32	q2, d11, d8
-	vmlal.s32	q2, d12, d7
-	vmlal.s32	q2, d13, d6
-	vmlal.s32	q2, d14, d1
-	vmull.s32	q0, d15, d1
-	vmlal.s32	q0, d10, d14
-	vmlal.s32	q0, d11, d19
-	vmlal.s32	q0, d12, d8
-	vmlal.s32	q0, d13, d17
-	vmlal.s32	q0, d6, d6
-	add		r2, sp, #480
-	vld1.8		{d18-d19}, [r2, : 128]!
-	vmull.s32	q3, d16, d7
-	vmlal.s32	q3, d10, d15
-	vmlal.s32	q3, d11, d14
-	vmlal.s32	q3, d12, d9
-	vmlal.s32	q3, d13, d8
-	vld1.8		{d8-d9}, [r2, : 128]
-	vadd.i64	q5, q12, q9
-	vadd.i64	q6, q15, q9
-	vshr.s64	q5, q5, #26
-	vshr.s64	q6, q6, #26
-	vadd.i64	q7, q10, q5
-	vshl.i64	q5, q5, #26
-	vadd.i64	q8, q7, q4
-	vadd.i64	q2, q2, q6
-	vshl.i64	q6, q6, #26
-	vadd.i64	q10, q2, q4
-	vsub.i64	q5, q12, q5
-	vshr.s64	q8, q8, #25
-	vsub.i64	q6, q15, q6
-	vshr.s64	q10, q10, #25
-	vadd.i64	q12, q13, q8
-	vshl.i64	q8, q8, #25
-	vadd.i64	q13, q12, q9
-	vadd.i64	q0, q0, q10
-	vsub.i64	q7, q7, q8
-	vshr.s64	q8, q13, #26
-	vshl.i64	q10, q10, #25
-	vadd.i64	q13, q0, q9
-	vadd.i64	q1, q1, q8
-	vshl.i64	q8, q8, #26
-	vadd.i64	q15, q1, q4
-	vsub.i64	q2, q2, q10
-	vshr.s64	q10, q13, #26
-	vsub.i64	q8, q12, q8
-	vshr.s64	q12, q15, #25
-	vadd.i64	q3, q3, q10
-	vshl.i64	q10, q10, #26
-	vadd.i64	q13, q3, q4
-	vadd.i64	q14, q14, q12
-	add		r2, r3, #288
-	vshl.i64	q12, q12, #25
-	add		r4, r3, #336
-	vadd.i64	q15, q14, q9
-	add		r2, r2, #8
-	vsub.i64	q0, q0, q10
-	add		r4, r4, #8
-	vshr.s64	q10, q13, #25
-	vsub.i64	q1, q1, q12
-	vshr.s64	q12, q15, #26
-	vadd.i64	q13, q10, q10
-	vadd.i64	q11, q11, q12
-	vtrn.32		d16, d2
-	vshl.i64	q12, q12, #26
-	vtrn.32		d17, d3
-	vadd.i64	q1, q11, q4
-	vadd.i64	q4, q5, q13
-	vst1.8		d16, [r2, : 64]!
-	vshl.i64	q5, q10, #4
-	vst1.8		d17, [r4, : 64]!
-	vsub.i64	q8, q14, q12
-	vshr.s64	q1, q1, #25
-	vadd.i64	q4, q4, q5
-	vadd.i64	q5, q6, q1
-	vshl.i64	q1, q1, #25
-	vadd.i64	q6, q5, q9
-	vadd.i64	q4, q4, q10
-	vshl.i64	q10, q10, #25
-	vadd.i64	q9, q4, q9
-	vsub.i64	q1, q11, q1
-	vshr.s64	q6, q6, #26
-	vsub.i64	q3, q3, q10
-	vtrn.32		d16, d2
-	vshr.s64	q9, q9, #26
-	vtrn.32		d17, d3
-	vadd.i64	q1, q2, q6
-	vst1.8		d16, [r2, : 64]
-	vshl.i64	q2, q6, #26
-	vst1.8		d17, [r4, : 64]
-	vadd.i64	q6, q7, q9
-	vtrn.32		d0, d6
-	vshl.i64	q7, q9, #26
-	vtrn.32		d1, d7
-	vsub.i64	q2, q5, q2
-	add		r2, r2, #16
-	vsub.i64	q3, q4, q7
-	vst1.8		d0, [r2, : 64]
-	add		r4, r4, #16
-	vst1.8		d1, [r4, : 64]
-	vtrn.32		d4, d2
-	vtrn.32		d5, d3
-	sub		r2, r2, #8
-	sub		r4, r4, #8
-	vtrn.32		d6, d12
-	vtrn.32		d7, d13
-	vst1.8		d4, [r2, : 64]
-	vst1.8		d5, [r4, : 64]
-	sub		r2, r2, #24
-	sub		r4, r4, #24
-	vst1.8		d6, [r2, : 64]
-	vst1.8		d7, [r4, : 64]
-	add		r2, r3, #240
-	add		r4, r3, #96
-	vld1.8		{d0-d1}, [r4, : 128]!
-	vld1.8		{d2-d3}, [r4, : 128]!
-	vld1.8		{d4}, [r4, : 64]
-	add		r4, r3, #144
-	vld1.8		{d6-d7}, [r4, : 128]!
-	vtrn.32		q0, q3
-	vld1.8		{d8-d9}, [r4, : 128]!
-	vshl.i32	q5, q0, #4
-	vtrn.32		q1, q4
-	vshl.i32	q6, q3, #4
-	vadd.i32	q5, q5, q0
-	vadd.i32	q6, q6, q3
-	vshl.i32	q7, q1, #4
-	vld1.8		{d5}, [r4, : 64]
-	vshl.i32	q8, q4, #4
-	vtrn.32		d4, d5
-	vadd.i32	q7, q7, q1
-	vadd.i32	q8, q8, q4
-	vld1.8		{d18-d19}, [r2, : 128]!
-	vshl.i32	q10, q2, #4
-	vld1.8		{d22-d23}, [r2, : 128]!
-	vadd.i32	q10, q10, q2
-	vld1.8		{d24}, [r2, : 64]
-	vadd.i32	q5, q5, q0
-	add		r2, r3, #192
-	vld1.8		{d26-d27}, [r2, : 128]!
-	vadd.i32	q6, q6, q3
-	vld1.8		{d28-d29}, [r2, : 128]!
-	vadd.i32	q8, q8, q4
-	vld1.8		{d25}, [r2, : 64]
-	vadd.i32	q10, q10, q2
-	vtrn.32		q9, q13
-	vadd.i32	q7, q7, q1
-	vadd.i32	q5, q5, q0
-	vtrn.32		q11, q14
-	vadd.i32	q6, q6, q3
-	add		r2, sp, #528
-	vadd.i32	q10, q10, q2
-	vtrn.32		d24, d25
-	vst1.8		{d12-d13}, [r2, : 128]!
-	vshl.i32	q6, q13, #1
-	vst1.8		{d20-d21}, [r2, : 128]!
-	vshl.i32	q10, q14, #1
-	vst1.8		{d12-d13}, [r2, : 128]!
-	vshl.i32	q15, q12, #1
-	vadd.i32	q8, q8, q4
-	vext.32		d10, d31, d30, #0
-	vadd.i32	q7, q7, q1
-	vst1.8		{d16-d17}, [r2, : 128]!
-	vmull.s32	q8, d18, d5
-	vmlal.s32	q8, d26, d4
-	vmlal.s32	q8, d19, d9
-	vmlal.s32	q8, d27, d3
-	vmlal.s32	q8, d22, d8
-	vmlal.s32	q8, d28, d2
-	vmlal.s32	q8, d23, d7
-	vmlal.s32	q8, d29, d1
-	vmlal.s32	q8, d24, d6
-	vmlal.s32	q8, d25, d0
-	vst1.8		{d14-d15}, [r2, : 128]!
-	vmull.s32	q2, d18, d4
-	vmlal.s32	q2, d12, d9
-	vmlal.s32	q2, d13, d8
-	vmlal.s32	q2, d19, d3
-	vmlal.s32	q2, d22, d2
-	vmlal.s32	q2, d23, d1
-	vmlal.s32	q2, d24, d0
-	vst1.8		{d20-d21}, [r2, : 128]!
-	vmull.s32	q7, d18, d9
-	vmlal.s32	q7, d26, d3
-	vmlal.s32	q7, d19, d8
-	vmlal.s32	q7, d27, d2
-	vmlal.s32	q7, d22, d7
-	vmlal.s32	q7, d28, d1
-	vmlal.s32	q7, d23, d6
-	vmlal.s32	q7, d29, d0
-	vst1.8		{d10-d11}, [r2, : 128]!
-	vmull.s32	q5, d18, d3
-	vmlal.s32	q5, d19, d2
-	vmlal.s32	q5, d22, d1
-	vmlal.s32	q5, d23, d0
-	vmlal.s32	q5, d12, d8
-	vst1.8		{d16-d17}, [r2, : 128]
-	vmull.s32	q4, d18, d8
-	vmlal.s32	q4, d26, d2
-	vmlal.s32	q4, d19, d7
-	vmlal.s32	q4, d27, d1
-	vmlal.s32	q4, d22, d6
-	vmlal.s32	q4, d28, d0
-	vmull.s32	q8, d18, d7
-	vmlal.s32	q8, d26, d1
-	vmlal.s32	q8, d19, d6
-	vmlal.s32	q8, d27, d0
-	add		r2, sp, #544
-	vld1.8		{d20-d21}, [r2, : 128]
-	vmlal.s32	q7, d24, d21
-	vmlal.s32	q7, d25, d20
-	vmlal.s32	q4, d23, d21
-	vmlal.s32	q4, d29, d20
-	vmlal.s32	q8, d22, d21
-	vmlal.s32	q8, d28, d20
-	vmlal.s32	q5, d24, d20
-	vst1.8		{d14-d15}, [r2, : 128]
-	vmull.s32	q7, d18, d6
-	vmlal.s32	q7, d26, d0
-	add		r2, sp, #624
-	vld1.8		{d30-d31}, [r2, : 128]
-	vmlal.s32	q2, d30, d21
-	vmlal.s32	q7, d19, d21
-	vmlal.s32	q7, d27, d20
-	add		r2, sp, #592
-	vld1.8		{d26-d27}, [r2, : 128]
-	vmlal.s32	q4, d25, d27
-	vmlal.s32	q8, d29, d27
-	vmlal.s32	q8, d25, d26
-	vmlal.s32	q7, d28, d27
-	vmlal.s32	q7, d29, d26
-	add		r2, sp, #576
-	vld1.8		{d28-d29}, [r2, : 128]
-	vmlal.s32	q4, d24, d29
-	vmlal.s32	q8, d23, d29
-	vmlal.s32	q8, d24, d28
-	vmlal.s32	q7, d22, d29
-	vmlal.s32	q7, d23, d28
-	vst1.8		{d8-d9}, [r2, : 128]
-	add		r2, sp, #528
-	vld1.8		{d8-d9}, [r2, : 128]
-	vmlal.s32	q7, d24, d9
-	vmlal.s32	q7, d25, d31
-	vmull.s32	q1, d18, d2
-	vmlal.s32	q1, d19, d1
-	vmlal.s32	q1, d22, d0
-	vmlal.s32	q1, d24, d27
-	vmlal.s32	q1, d23, d20
-	vmlal.s32	q1, d12, d7
-	vmlal.s32	q1, d13, d6
-	vmull.s32	q6, d18, d1
-	vmlal.s32	q6, d19, d0
-	vmlal.s32	q6, d23, d27
-	vmlal.s32	q6, d22, d20
-	vmlal.s32	q6, d24, d26
-	vmull.s32	q0, d18, d0
-	vmlal.s32	q0, d22, d27
-	vmlal.s32	q0, d23, d26
-	vmlal.s32	q0, d24, d31
-	vmlal.s32	q0, d19, d20
-	add		r2, sp, #608
-	vld1.8		{d18-d19}, [r2, : 128]
-	vmlal.s32	q2, d18, d7
-	vmlal.s32	q5, d18, d6
-	vmlal.s32	q1, d18, d21
-	vmlal.s32	q0, d18, d28
-	vmlal.s32	q6, d18, d29
-	vmlal.s32	q2, d19, d6
-	vmlal.s32	q5, d19, d21
-	vmlal.s32	q1, d19, d29
-	vmlal.s32	q0, d19, d9
-	vmlal.s32	q6, d19, d28
-	add		r2, sp, #560
-	vld1.8		{d18-d19}, [r2, : 128]
-	add		r2, sp, #480
-	vld1.8		{d22-d23}, [r2, : 128]
-	vmlal.s32	q5, d19, d7
-	vmlal.s32	q0, d18, d21
-	vmlal.s32	q0, d19, d29
-	vmlal.s32	q6, d18, d6
-	add		r2, sp, #496
-	vld1.8		{d6-d7}, [r2, : 128]
-	vmlal.s32	q6, d19, d21
-	add		r2, sp, #544
-	vld1.8		{d18-d19}, [r2, : 128]
-	vmlal.s32	q0, d30, d8
-	add		r2, sp, #640
-	vld1.8		{d20-d21}, [r2, : 128]
-	vmlal.s32	q5, d30, d29
-	add		r2, sp, #576
-	vld1.8		{d24-d25}, [r2, : 128]
-	vmlal.s32	q1, d30, d28
-	vadd.i64	q13, q0, q11
-	vadd.i64	q14, q5, q11
-	vmlal.s32	q6, d30, d9
-	vshr.s64	q4, q13, #26
-	vshr.s64	q13, q14, #26
-	vadd.i64	q7, q7, q4
-	vshl.i64	q4, q4, #26
-	vadd.i64	q14, q7, q3
-	vadd.i64	q9, q9, q13
-	vshl.i64	q13, q13, #26
-	vadd.i64	q15, q9, q3
-	vsub.i64	q0, q0, q4
-	vshr.s64	q4, q14, #25
-	vsub.i64	q5, q5, q13
-	vshr.s64	q13, q15, #25
-	vadd.i64	q6, q6, q4
-	vshl.i64	q4, q4, #25
-	vadd.i64	q14, q6, q11
-	vadd.i64	q2, q2, q13
-	vsub.i64	q4, q7, q4
-	vshr.s64	q7, q14, #26
-	vshl.i64	q13, q13, #25
-	vadd.i64	q14, q2, q11
-	vadd.i64	q8, q8, q7
-	vshl.i64	q7, q7, #26
-	vadd.i64	q15, q8, q3
-	vsub.i64	q9, q9, q13
-	vshr.s64	q13, q14, #26
-	vsub.i64	q6, q6, q7
-	vshr.s64	q7, q15, #25
-	vadd.i64	q10, q10, q13
-	vshl.i64	q13, q13, #26
-	vadd.i64	q14, q10, q3
-	vadd.i64	q1, q1, q7
-	add		r2, r3, #144
-	vshl.i64	q7, q7, #25
-	add		r4, r3, #96
-	vadd.i64	q15, q1, q11
-	add		r2, r2, #8
-	vsub.i64	q2, q2, q13
-	add		r4, r4, #8
-	vshr.s64	q13, q14, #25
-	vsub.i64	q7, q8, q7
-	vshr.s64	q8, q15, #26
-	vadd.i64	q14, q13, q13
-	vadd.i64	q12, q12, q8
-	vtrn.32		d12, d14
-	vshl.i64	q8, q8, #26
-	vtrn.32		d13, d15
-	vadd.i64	q3, q12, q3
-	vadd.i64	q0, q0, q14
-	vst1.8		d12, [r2, : 64]!
-	vshl.i64	q7, q13, #4
-	vst1.8		d13, [r4, : 64]!
-	vsub.i64	q1, q1, q8
-	vshr.s64	q3, q3, #25
-	vadd.i64	q0, q0, q7
-	vadd.i64	q5, q5, q3
-	vshl.i64	q3, q3, #25
-	vadd.i64	q6, q5, q11
-	vadd.i64	q0, q0, q13
-	vshl.i64	q7, q13, #25
-	vadd.i64	q8, q0, q11
-	vsub.i64	q3, q12, q3
-	vshr.s64	q6, q6, #26
-	vsub.i64	q7, q10, q7
-	vtrn.32		d2, d6
-	vshr.s64	q8, q8, #26
-	vtrn.32		d3, d7
-	vadd.i64	q3, q9, q6
-	vst1.8		d2, [r2, : 64]
-	vshl.i64	q6, q6, #26
-	vst1.8		d3, [r4, : 64]
-	vadd.i64	q1, q4, q8
-	vtrn.32		d4, d14
-	vshl.i64	q4, q8, #26
-	vtrn.32		d5, d15
-	vsub.i64	q5, q5, q6
-	add		r2, r2, #16
-	vsub.i64	q0, q0, q4
-	vst1.8		d4, [r2, : 64]
-	add		r4, r4, #16
-	vst1.8		d5, [r4, : 64]
-	vtrn.32		d10, d6
-	vtrn.32		d11, d7
-	sub		r2, r2, #8
-	sub		r4, r4, #8
-	vtrn.32		d0, d2
-	vtrn.32		d1, d3
-	vst1.8		d10, [r2, : 64]
-	vst1.8		d11, [r4, : 64]
-	sub		r2, r2, #24
-	sub		r4, r4, #24
-	vst1.8		d0, [r2, : 64]
-	vst1.8		d1, [r4, : 64]
-	add		r2, r3, #288
-	add		r4, r3, #336
-	vld1.8		{d0-d1}, [r2, : 128]!
-	vld1.8		{d2-d3}, [r4, : 128]!
-	vsub.i32	q0, q0, q1
-	vld1.8		{d2-d3}, [r2, : 128]!
-	vld1.8		{d4-d5}, [r4, : 128]!
-	vsub.i32	q1, q1, q2
-	add		r5, r3, #240
-	vld1.8		{d4}, [r2, : 64]
-	vld1.8		{d6}, [r4, : 64]
-	vsub.i32	q2, q2, q3
-	vst1.8		{d0-d1}, [r5, : 128]!
-	vst1.8		{d2-d3}, [r5, : 128]!
-	vst1.8		d4, [r5, : 64]
-	add		r2, r3, #144
-	add		r4, r3, #96
-	add		r5, r3, #144
-	add		r6, r3, #192
-	vld1.8		{d0-d1}, [r2, : 128]!
-	vld1.8		{d2-d3}, [r4, : 128]!
-	vsub.i32	q2, q0, q1
-	vadd.i32	q0, q0, q1
-	vld1.8		{d2-d3}, [r2, : 128]!
-	vld1.8		{d6-d7}, [r4, : 128]!
-	vsub.i32	q4, q1, q3
-	vadd.i32	q1, q1, q3
-	vld1.8		{d6}, [r2, : 64]
-	vld1.8		{d10}, [r4, : 64]
-	vsub.i32	q6, q3, q5
-	vadd.i32	q3, q3, q5
-	vst1.8		{d4-d5}, [r5, : 128]!
-	vst1.8		{d0-d1}, [r6, : 128]!
-	vst1.8		{d8-d9}, [r5, : 128]!
-	vst1.8		{d2-d3}, [r6, : 128]!
-	vst1.8		d12, [r5, : 64]
-	vst1.8		d6, [r6, : 64]
-	add		r2, r3, #0
-	add		r4, r3, #240
-	vld1.8		{d0-d1}, [r4, : 128]!
-	vld1.8		{d2-d3}, [r4, : 128]!
-	vld1.8		{d4}, [r4, : 64]
-	add		r4, r3, #336
-	vld1.8		{d6-d7}, [r4, : 128]!
-	vtrn.32		q0, q3
-	vld1.8		{d8-d9}, [r4, : 128]!
-	vshl.i32	q5, q0, #4
-	vtrn.32		q1, q4
-	vshl.i32	q6, q3, #4
-	vadd.i32	q5, q5, q0
-	vadd.i32	q6, q6, q3
-	vshl.i32	q7, q1, #4
-	vld1.8		{d5}, [r4, : 64]
-	vshl.i32	q8, q4, #4
-	vtrn.32		d4, d5
-	vadd.i32	q7, q7, q1
-	vadd.i32	q8, q8, q4
-	vld1.8		{d18-d19}, [r2, : 128]!
-	vshl.i32	q10, q2, #4
-	vld1.8		{d22-d23}, [r2, : 128]!
-	vadd.i32	q10, q10, q2
-	vld1.8		{d24}, [r2, : 64]
-	vadd.i32	q5, q5, q0
-	add		r2, r3, #288
-	vld1.8		{d26-d27}, [r2, : 128]!
-	vadd.i32	q6, q6, q3
-	vld1.8		{d28-d29}, [r2, : 128]!
-	vadd.i32	q8, q8, q4
-	vld1.8		{d25}, [r2, : 64]
-	vadd.i32	q10, q10, q2
-	vtrn.32		q9, q13
-	vadd.i32	q7, q7, q1
-	vadd.i32	q5, q5, q0
-	vtrn.32		q11, q14
-	vadd.i32	q6, q6, q3
-	add		r2, sp, #528
-	vadd.i32	q10, q10, q2
-	vtrn.32		d24, d25
-	vst1.8		{d12-d13}, [r2, : 128]!
-	vshl.i32	q6, q13, #1
-	vst1.8		{d20-d21}, [r2, : 128]!
-	vshl.i32	q10, q14, #1
-	vst1.8		{d12-d13}, [r2, : 128]!
-	vshl.i32	q15, q12, #1
-	vadd.i32	q8, q8, q4
-	vext.32		d10, d31, d30, #0
-	vadd.i32	q7, q7, q1
-	vst1.8		{d16-d17}, [r2, : 128]!
-	vmull.s32	q8, d18, d5
-	vmlal.s32	q8, d26, d4
-	vmlal.s32	q8, d19, d9
-	vmlal.s32	q8, d27, d3
-	vmlal.s32	q8, d22, d8
-	vmlal.s32	q8, d28, d2
-	vmlal.s32	q8, d23, d7
-	vmlal.s32	q8, d29, d1
-	vmlal.s32	q8, d24, d6
-	vmlal.s32	q8, d25, d0
-	vst1.8		{d14-d15}, [r2, : 128]!
-	vmull.s32	q2, d18, d4
-	vmlal.s32	q2, d12, d9
-	vmlal.s32	q2, d13, d8
-	vmlal.s32	q2, d19, d3
-	vmlal.s32	q2, d22, d2
-	vmlal.s32	q2, d23, d1
-	vmlal.s32	q2, d24, d0
-	vst1.8		{d20-d21}, [r2, : 128]!
-	vmull.s32	q7, d18, d9
-	vmlal.s32	q7, d26, d3
-	vmlal.s32	q7, d19, d8
-	vmlal.s32	q7, d27, d2
-	vmlal.s32	q7, d22, d7
-	vmlal.s32	q7, d28, d1
-	vmlal.s32	q7, d23, d6
-	vmlal.s32	q7, d29, d0
-	vst1.8		{d10-d11}, [r2, : 128]!
-	vmull.s32	q5, d18, d3
-	vmlal.s32	q5, d19, d2
-	vmlal.s32	q5, d22, d1
-	vmlal.s32	q5, d23, d0
-	vmlal.s32	q5, d12, d8
-	vst1.8		{d16-d17}, [r2, : 128]!
-	vmull.s32	q4, d18, d8
-	vmlal.s32	q4, d26, d2
-	vmlal.s32	q4, d19, d7
-	vmlal.s32	q4, d27, d1
-	vmlal.s32	q4, d22, d6
-	vmlal.s32	q4, d28, d0
-	vmull.s32	q8, d18, d7
-	vmlal.s32	q8, d26, d1
-	vmlal.s32	q8, d19, d6
-	vmlal.s32	q8, d27, d0
-	add		r2, sp, #544
-	vld1.8		{d20-d21}, [r2, : 128]
-	vmlal.s32	q7, d24, d21
-	vmlal.s32	q7, d25, d20
-	vmlal.s32	q4, d23, d21
-	vmlal.s32	q4, d29, d20
-	vmlal.s32	q8, d22, d21
-	vmlal.s32	q8, d28, d20
-	vmlal.s32	q5, d24, d20
-	vst1.8		{d14-d15}, [r2, : 128]
-	vmull.s32	q7, d18, d6
-	vmlal.s32	q7, d26, d0
-	add		r2, sp, #624
-	vld1.8		{d30-d31}, [r2, : 128]
-	vmlal.s32	q2, d30, d21
-	vmlal.s32	q7, d19, d21
-	vmlal.s32	q7, d27, d20
-	add		r2, sp, #592
-	vld1.8		{d26-d27}, [r2, : 128]
-	vmlal.s32	q4, d25, d27
-	vmlal.s32	q8, d29, d27
-	vmlal.s32	q8, d25, d26
-	vmlal.s32	q7, d28, d27
-	vmlal.s32	q7, d29, d26
-	add		r2, sp, #576
-	vld1.8		{d28-d29}, [r2, : 128]
-	vmlal.s32	q4, d24, d29
-	vmlal.s32	q8, d23, d29
-	vmlal.s32	q8, d24, d28
-	vmlal.s32	q7, d22, d29
-	vmlal.s32	q7, d23, d28
-	vst1.8		{d8-d9}, [r2, : 128]
-	add		r2, sp, #528
-	vld1.8		{d8-d9}, [r2, : 128]
-	vmlal.s32	q7, d24, d9
-	vmlal.s32	q7, d25, d31
-	vmull.s32	q1, d18, d2
-	vmlal.s32	q1, d19, d1
-	vmlal.s32	q1, d22, d0
-	vmlal.s32	q1, d24, d27
-	vmlal.s32	q1, d23, d20
-	vmlal.s32	q1, d12, d7
-	vmlal.s32	q1, d13, d6
-	vmull.s32	q6, d18, d1
-	vmlal.s32	q6, d19, d0
-	vmlal.s32	q6, d23, d27
-	vmlal.s32	q6, d22, d20
-	vmlal.s32	q6, d24, d26
-	vmull.s32	q0, d18, d0
-	vmlal.s32	q0, d22, d27
-	vmlal.s32	q0, d23, d26
-	vmlal.s32	q0, d24, d31
-	vmlal.s32	q0, d19, d20
-	add		r2, sp, #608
-	vld1.8		{d18-d19}, [r2, : 128]
-	vmlal.s32	q2, d18, d7
-	vmlal.s32	q5, d18, d6
-	vmlal.s32	q1, d18, d21
-	vmlal.s32	q0, d18, d28
-	vmlal.s32	q6, d18, d29
-	vmlal.s32	q2, d19, d6
-	vmlal.s32	q5, d19, d21
-	vmlal.s32	q1, d19, d29
-	vmlal.s32	q0, d19, d9
-	vmlal.s32	q6, d19, d28
-	add		r2, sp, #560
-	vld1.8		{d18-d19}, [r2, : 128]
-	add		r2, sp, #480
-	vld1.8		{d22-d23}, [r2, : 128]
-	vmlal.s32	q5, d19, d7
-	vmlal.s32	q0, d18, d21
-	vmlal.s32	q0, d19, d29
-	vmlal.s32	q6, d18, d6
-	add		r2, sp, #496
-	vld1.8		{d6-d7}, [r2, : 128]
-	vmlal.s32	q6, d19, d21
-	add		r2, sp, #544
-	vld1.8		{d18-d19}, [r2, : 128]
-	vmlal.s32	q0, d30, d8
-	add		r2, sp, #640
-	vld1.8		{d20-d21}, [r2, : 128]
-	vmlal.s32	q5, d30, d29
-	add		r2, sp, #576
-	vld1.8		{d24-d25}, [r2, : 128]
-	vmlal.s32	q1, d30, d28
-	vadd.i64	q13, q0, q11
-	vadd.i64	q14, q5, q11
-	vmlal.s32	q6, d30, d9
-	vshr.s64	q4, q13, #26
-	vshr.s64	q13, q14, #26
-	vadd.i64	q7, q7, q4
-	vshl.i64	q4, q4, #26
-	vadd.i64	q14, q7, q3
-	vadd.i64	q9, q9, q13
-	vshl.i64	q13, q13, #26
-	vadd.i64	q15, q9, q3
-	vsub.i64	q0, q0, q4
-	vshr.s64	q4, q14, #25
-	vsub.i64	q5, q5, q13
-	vshr.s64	q13, q15, #25
-	vadd.i64	q6, q6, q4
-	vshl.i64	q4, q4, #25
-	vadd.i64	q14, q6, q11
-	vadd.i64	q2, q2, q13
-	vsub.i64	q4, q7, q4
-	vshr.s64	q7, q14, #26
-	vshl.i64	q13, q13, #25
-	vadd.i64	q14, q2, q11
-	vadd.i64	q8, q8, q7
-	vshl.i64	q7, q7, #26
-	vadd.i64	q15, q8, q3
-	vsub.i64	q9, q9, q13
-	vshr.s64	q13, q14, #26
-	vsub.i64	q6, q6, q7
-	vshr.s64	q7, q15, #25
-	vadd.i64	q10, q10, q13
-	vshl.i64	q13, q13, #26
-	vadd.i64	q14, q10, q3
-	vadd.i64	q1, q1, q7
-	add		r2, r3, #288
-	vshl.i64	q7, q7, #25
-	add		r4, r3, #96
-	vadd.i64	q15, q1, q11
-	add		r2, r2, #8
-	vsub.i64	q2, q2, q13
-	add		r4, r4, #8
-	vshr.s64	q13, q14, #25
-	vsub.i64	q7, q8, q7
-	vshr.s64	q8, q15, #26
-	vadd.i64	q14, q13, q13
-	vadd.i64	q12, q12, q8
-	vtrn.32		d12, d14
-	vshl.i64	q8, q8, #26
-	vtrn.32		d13, d15
-	vadd.i64	q3, q12, q3
-	vadd.i64	q0, q0, q14
-	vst1.8		d12, [r2, : 64]!
-	vshl.i64	q7, q13, #4
-	vst1.8		d13, [r4, : 64]!
-	vsub.i64	q1, q1, q8
-	vshr.s64	q3, q3, #25
-	vadd.i64	q0, q0, q7
-	vadd.i64	q5, q5, q3
-	vshl.i64	q3, q3, #25
-	vadd.i64	q6, q5, q11
-	vadd.i64	q0, q0, q13
-	vshl.i64	q7, q13, #25
-	vadd.i64	q8, q0, q11
-	vsub.i64	q3, q12, q3
-	vshr.s64	q6, q6, #26
-	vsub.i64	q7, q10, q7
-	vtrn.32		d2, d6
-	vshr.s64	q8, q8, #26
-	vtrn.32		d3, d7
-	vadd.i64	q3, q9, q6
-	vst1.8		d2, [r2, : 64]
-	vshl.i64	q6, q6, #26
-	vst1.8		d3, [r4, : 64]
-	vadd.i64	q1, q4, q8
-	vtrn.32		d4, d14
-	vshl.i64	q4, q8, #26
-	vtrn.32		d5, d15
-	vsub.i64	q5, q5, q6
-	add		r2, r2, #16
-	vsub.i64	q0, q0, q4
-	vst1.8		d4, [r2, : 64]
-	add		r4, r4, #16
-	vst1.8		d5, [r4, : 64]
-	vtrn.32		d10, d6
-	vtrn.32		d11, d7
-	sub		r2, r2, #8
-	sub		r4, r4, #8
-	vtrn.32		d0, d2
-	vtrn.32		d1, d3
-	vst1.8		d10, [r2, : 64]
-	vst1.8		d11, [r4, : 64]
-	sub		r2, r2, #24
-	sub		r4, r4, #24
-	vst1.8		d0, [r2, : 64]
-	vst1.8		d1, [r4, : 64]
-	add		r2, sp, #512
-	add		r4, r3, #144
-	add		r5, r3, #192
-	vld1.8		{d0-d1}, [r2, : 128]
-	vld1.8		{d2-d3}, [r4, : 128]!
-	vld1.8		{d4-d5}, [r5, : 128]!
-	vzip.i32	q1, q2
-	vld1.8		{d6-d7}, [r4, : 128]!
-	vld1.8		{d8-d9}, [r5, : 128]!
-	vshl.i32	q5, q1, #1
-	vzip.i32	q3, q4
-	vshl.i32	q6, q2, #1
-	vld1.8		{d14}, [r4, : 64]
-	vshl.i32	q8, q3, #1
-	vld1.8		{d15}, [r5, : 64]
-	vshl.i32	q9, q4, #1
-	vmul.i32	d21, d7, d1
-	vtrn.32		d14, d15
-	vmul.i32	q11, q4, q0
-	vmul.i32	q0, q7, q0
-	vmull.s32	q12, d2, d2
-	vmlal.s32	q12, d11, d1
-	vmlal.s32	q12, d12, d0
-	vmlal.s32	q12, d13, d23
-	vmlal.s32	q12, d16, d22
-	vmlal.s32	q12, d7, d21
-	vmull.s32	q10, d2, d11
-	vmlal.s32	q10, d4, d1
-	vmlal.s32	q10, d13, d0
-	vmlal.s32	q10, d6, d23
-	vmlal.s32	q10, d17, d22
-	vmull.s32	q13, d10, d4
-	vmlal.s32	q13, d11, d3
-	vmlal.s32	q13, d13, d1
-	vmlal.s32	q13, d16, d0
-	vmlal.s32	q13, d17, d23
-	vmlal.s32	q13, d8, d22
-	vmull.s32	q1, d10, d5
-	vmlal.s32	q1, d11, d4
-	vmlal.s32	q1, d6, d1
-	vmlal.s32	q1, d17, d0
-	vmlal.s32	q1, d8, d23
-	vmull.s32	q14, d10, d6
-	vmlal.s32	q14, d11, d13
-	vmlal.s32	q14, d4, d4
-	vmlal.s32	q14, d17, d1
-	vmlal.s32	q14, d18, d0
-	vmlal.s32	q14, d9, d23
-	vmull.s32	q11, d10, d7
-	vmlal.s32	q11, d11, d6
-	vmlal.s32	q11, d12, d5
-	vmlal.s32	q11, d8, d1
-	vmlal.s32	q11, d19, d0
-	vmull.s32	q15, d10, d8
-	vmlal.s32	q15, d11, d17
-	vmlal.s32	q15, d12, d6
-	vmlal.s32	q15, d13, d5
-	vmlal.s32	q15, d19, d1
-	vmlal.s32	q15, d14, d0
-	vmull.s32	q2, d10, d9
-	vmlal.s32	q2, d11, d8
-	vmlal.s32	q2, d12, d7
-	vmlal.s32	q2, d13, d6
-	vmlal.s32	q2, d14, d1
-	vmull.s32	q0, d15, d1
-	vmlal.s32	q0, d10, d14
-	vmlal.s32	q0, d11, d19
-	vmlal.s32	q0, d12, d8
-	vmlal.s32	q0, d13, d17
-	vmlal.s32	q0, d6, d6
-	add		r2, sp, #480
-	vld1.8		{d18-d19}, [r2, : 128]!
-	vmull.s32	q3, d16, d7
-	vmlal.s32	q3, d10, d15
-	vmlal.s32	q3, d11, d14
-	vmlal.s32	q3, d12, d9
-	vmlal.s32	q3, d13, d8
-	vld1.8		{d8-d9}, [r2, : 128]
-	vadd.i64	q5, q12, q9
-	vadd.i64	q6, q15, q9
-	vshr.s64	q5, q5, #26
-	vshr.s64	q6, q6, #26
-	vadd.i64	q7, q10, q5
-	vshl.i64	q5, q5, #26
-	vadd.i64	q8, q7, q4
-	vadd.i64	q2, q2, q6
-	vshl.i64	q6, q6, #26
-	vadd.i64	q10, q2, q4
-	vsub.i64	q5, q12, q5
-	vshr.s64	q8, q8, #25
-	vsub.i64	q6, q15, q6
-	vshr.s64	q10, q10, #25
-	vadd.i64	q12, q13, q8
-	vshl.i64	q8, q8, #25
-	vadd.i64	q13, q12, q9
-	vadd.i64	q0, q0, q10
-	vsub.i64	q7, q7, q8
-	vshr.s64	q8, q13, #26
-	vshl.i64	q10, q10, #25
-	vadd.i64	q13, q0, q9
-	vadd.i64	q1, q1, q8
-	vshl.i64	q8, q8, #26
-	vadd.i64	q15, q1, q4
-	vsub.i64	q2, q2, q10
-	vshr.s64	q10, q13, #26
-	vsub.i64	q8, q12, q8
-	vshr.s64	q12, q15, #25
-	vadd.i64	q3, q3, q10
-	vshl.i64	q10, q10, #26
-	vadd.i64	q13, q3, q4
-	vadd.i64	q14, q14, q12
-	add		r2, r3, #144
-	vshl.i64	q12, q12, #25
-	add		r4, r3, #192
-	vadd.i64	q15, q14, q9
-	add		r2, r2, #8
-	vsub.i64	q0, q0, q10
-	add		r4, r4, #8
-	vshr.s64	q10, q13, #25
-	vsub.i64	q1, q1, q12
-	vshr.s64	q12, q15, #26
-	vadd.i64	q13, q10, q10
-	vadd.i64	q11, q11, q12
-	vtrn.32		d16, d2
-	vshl.i64	q12, q12, #26
-	vtrn.32		d17, d3
-	vadd.i64	q1, q11, q4
-	vadd.i64	q4, q5, q13
-	vst1.8		d16, [r2, : 64]!
-	vshl.i64	q5, q10, #4
-	vst1.8		d17, [r4, : 64]!
-	vsub.i64	q8, q14, q12
-	vshr.s64	q1, q1, #25
-	vadd.i64	q4, q4, q5
-	vadd.i64	q5, q6, q1
-	vshl.i64	q1, q1, #25
-	vadd.i64	q6, q5, q9
-	vadd.i64	q4, q4, q10
-	vshl.i64	q10, q10, #25
-	vadd.i64	q9, q4, q9
-	vsub.i64	q1, q11, q1
-	vshr.s64	q6, q6, #26
-	vsub.i64	q3, q3, q10
-	vtrn.32		d16, d2
-	vshr.s64	q9, q9, #26
-	vtrn.32		d17, d3
-	vadd.i64	q1, q2, q6
-	vst1.8		d16, [r2, : 64]
-	vshl.i64	q2, q6, #26
-	vst1.8		d17, [r4, : 64]
-	vadd.i64	q6, q7, q9
-	vtrn.32		d0, d6
-	vshl.i64	q7, q9, #26
-	vtrn.32		d1, d7
-	vsub.i64	q2, q5, q2
-	add		r2, r2, #16
-	vsub.i64	q3, q4, q7
-	vst1.8		d0, [r2, : 64]
-	add		r4, r4, #16
-	vst1.8		d1, [r4, : 64]
-	vtrn.32		d4, d2
-	vtrn.32		d5, d3
-	sub		r2, r2, #8
-	sub		r4, r4, #8
-	vtrn.32		d6, d12
-	vtrn.32		d7, d13
-	vst1.8		d4, [r2, : 64]
-	vst1.8		d5, [r4, : 64]
-	sub		r2, r2, #24
-	sub		r4, r4, #24
-	vst1.8		d6, [r2, : 64]
-	vst1.8		d7, [r4, : 64]
-	add		r2, r3, #336
-	add		r4, r3, #288
-	vld1.8		{d0-d1}, [r2, : 128]!
-	vld1.8		{d2-d3}, [r4, : 128]!
-	vadd.i32	q0, q0, q1
-	vld1.8		{d2-d3}, [r2, : 128]!
-	vld1.8		{d4-d5}, [r4, : 128]!
-	vadd.i32	q1, q1, q2
-	add		r5, r3, #288
-	vld1.8		{d4}, [r2, : 64]
-	vld1.8		{d6}, [r4, : 64]
-	vadd.i32	q2, q2, q3
-	vst1.8		{d0-d1}, [r5, : 128]!
-	vst1.8		{d2-d3}, [r5, : 128]!
-	vst1.8		d4, [r5, : 64]
-	add		r2, r3, #48
-	add		r4, r3, #144
-	vld1.8		{d0-d1}, [r4, : 128]!
-	vld1.8		{d2-d3}, [r4, : 128]!
-	vld1.8		{d4}, [r4, : 64]
-	add		r4, r3, #288
-	vld1.8		{d6-d7}, [r4, : 128]!
-	vtrn.32		q0, q3
-	vld1.8		{d8-d9}, [r4, : 128]!
-	vshl.i32	q5, q0, #4
-	vtrn.32		q1, q4
-	vshl.i32	q6, q3, #4
-	vadd.i32	q5, q5, q0
-	vadd.i32	q6, q6, q3
-	vshl.i32	q7, q1, #4
-	vld1.8		{d5}, [r4, : 64]
-	vshl.i32	q8, q4, #4
-	vtrn.32		d4, d5
-	vadd.i32	q7, q7, q1
-	vadd.i32	q8, q8, q4
-	vld1.8		{d18-d19}, [r2, : 128]!
-	vshl.i32	q10, q2, #4
-	vld1.8		{d22-d23}, [r2, : 128]!
-	vadd.i32	q10, q10, q2
-	vld1.8		{d24}, [r2, : 64]
-	vadd.i32	q5, q5, q0
-	add		r2, r3, #240
-	vld1.8		{d26-d27}, [r2, : 128]!
-	vadd.i32	q6, q6, q3
-	vld1.8		{d28-d29}, [r2, : 128]!
-	vadd.i32	q8, q8, q4
-	vld1.8		{d25}, [r2, : 64]
-	vadd.i32	q10, q10, q2
-	vtrn.32		q9, q13
-	vadd.i32	q7, q7, q1
-	vadd.i32	q5, q5, q0
-	vtrn.32		q11, q14
-	vadd.i32	q6, q6, q3
-	add		r2, sp, #528
-	vadd.i32	q10, q10, q2
-	vtrn.32		d24, d25
-	vst1.8		{d12-d13}, [r2, : 128]!
-	vshl.i32	q6, q13, #1
-	vst1.8		{d20-d21}, [r2, : 128]!
-	vshl.i32	q10, q14, #1
-	vst1.8		{d12-d13}, [r2, : 128]!
-	vshl.i32	q15, q12, #1
-	vadd.i32	q8, q8, q4
-	vext.32		d10, d31, d30, #0
-	vadd.i32	q7, q7, q1
-	vst1.8		{d16-d17}, [r2, : 128]!
-	vmull.s32	q8, d18, d5
-	vmlal.s32	q8, d26, d4
-	vmlal.s32	q8, d19, d9
-	vmlal.s32	q8, d27, d3
-	vmlal.s32	q8, d22, d8
-	vmlal.s32	q8, d28, d2
-	vmlal.s32	q8, d23, d7
-	vmlal.s32	q8, d29, d1
-	vmlal.s32	q8, d24, d6
-	vmlal.s32	q8, d25, d0
-	vst1.8		{d14-d15}, [r2, : 128]!
-	vmull.s32	q2, d18, d4
-	vmlal.s32	q2, d12, d9
-	vmlal.s32	q2, d13, d8
-	vmlal.s32	q2, d19, d3
-	vmlal.s32	q2, d22, d2
-	vmlal.s32	q2, d23, d1
-	vmlal.s32	q2, d24, d0
-	vst1.8		{d20-d21}, [r2, : 128]!
-	vmull.s32	q7, d18, d9
-	vmlal.s32	q7, d26, d3
-	vmlal.s32	q7, d19, d8
-	vmlal.s32	q7, d27, d2
-	vmlal.s32	q7, d22, d7
-	vmlal.s32	q7, d28, d1
-	vmlal.s32	q7, d23, d6
-	vmlal.s32	q7, d29, d0
-	vst1.8		{d10-d11}, [r2, : 128]!
-	vmull.s32	q5, d18, d3
-	vmlal.s32	q5, d19, d2
-	vmlal.s32	q5, d22, d1
-	vmlal.s32	q5, d23, d0
-	vmlal.s32	q5, d12, d8
-	vst1.8		{d16-d17}, [r2, : 128]!
-	vmull.s32	q4, d18, d8
-	vmlal.s32	q4, d26, d2
-	vmlal.s32	q4, d19, d7
-	vmlal.s32	q4, d27, d1
-	vmlal.s32	q4, d22, d6
-	vmlal.s32	q4, d28, d0
-	vmull.s32	q8, d18, d7
-	vmlal.s32	q8, d26, d1
-	vmlal.s32	q8, d19, d6
-	vmlal.s32	q8, d27, d0
-	add		r2, sp, #544
-	vld1.8		{d20-d21}, [r2, : 128]
-	vmlal.s32	q7, d24, d21
-	vmlal.s32	q7, d25, d20
-	vmlal.s32	q4, d23, d21
-	vmlal.s32	q4, d29, d20
-	vmlal.s32	q8, d22, d21
-	vmlal.s32	q8, d28, d20
-	vmlal.s32	q5, d24, d20
-	vst1.8		{d14-d15}, [r2, : 128]
-	vmull.s32	q7, d18, d6
-	vmlal.s32	q7, d26, d0
-	add		r2, sp, #624
-	vld1.8		{d30-d31}, [r2, : 128]
-	vmlal.s32	q2, d30, d21
-	vmlal.s32	q7, d19, d21
-	vmlal.s32	q7, d27, d20
-	add		r2, sp, #592
-	vld1.8		{d26-d27}, [r2, : 128]
-	vmlal.s32	q4, d25, d27
-	vmlal.s32	q8, d29, d27
-	vmlal.s32	q8, d25, d26
-	vmlal.s32	q7, d28, d27
-	vmlal.s32	q7, d29, d26
-	add		r2, sp, #576
-	vld1.8		{d28-d29}, [r2, : 128]
-	vmlal.s32	q4, d24, d29
-	vmlal.s32	q8, d23, d29
-	vmlal.s32	q8, d24, d28
-	vmlal.s32	q7, d22, d29
-	vmlal.s32	q7, d23, d28
-	vst1.8		{d8-d9}, [r2, : 128]
-	add		r2, sp, #528
-	vld1.8		{d8-d9}, [r2, : 128]
-	vmlal.s32	q7, d24, d9
-	vmlal.s32	q7, d25, d31
-	vmull.s32	q1, d18, d2
-	vmlal.s32	q1, d19, d1
-	vmlal.s32	q1, d22, d0
-	vmlal.s32	q1, d24, d27
-	vmlal.s32	q1, d23, d20
-	vmlal.s32	q1, d12, d7
-	vmlal.s32	q1, d13, d6
-	vmull.s32	q6, d18, d1
-	vmlal.s32	q6, d19, d0
-	vmlal.s32	q6, d23, d27
-	vmlal.s32	q6, d22, d20
-	vmlal.s32	q6, d24, d26
-	vmull.s32	q0, d18, d0
-	vmlal.s32	q0, d22, d27
-	vmlal.s32	q0, d23, d26
-	vmlal.s32	q0, d24, d31
-	vmlal.s32	q0, d19, d20
-	add		r2, sp, #608
-	vld1.8		{d18-d19}, [r2, : 128]
-	vmlal.s32	q2, d18, d7
-	vmlal.s32	q5, d18, d6
-	vmlal.s32	q1, d18, d21
-	vmlal.s32	q0, d18, d28
-	vmlal.s32	q6, d18, d29
-	vmlal.s32	q2, d19, d6
-	vmlal.s32	q5, d19, d21
-	vmlal.s32	q1, d19, d29
-	vmlal.s32	q0, d19, d9
-	vmlal.s32	q6, d19, d28
-	add		r2, sp, #560
-	vld1.8		{d18-d19}, [r2, : 128]
-	add		r2, sp, #480
-	vld1.8		{d22-d23}, [r2, : 128]
-	vmlal.s32	q5, d19, d7
-	vmlal.s32	q0, d18, d21
-	vmlal.s32	q0, d19, d29
-	vmlal.s32	q6, d18, d6
-	add		r2, sp, #496
-	vld1.8		{d6-d7}, [r2, : 128]
-	vmlal.s32	q6, d19, d21
-	add		r2, sp, #544
-	vld1.8		{d18-d19}, [r2, : 128]
-	vmlal.s32	q0, d30, d8
-	add		r2, sp, #640
-	vld1.8		{d20-d21}, [r2, : 128]
-	vmlal.s32	q5, d30, d29
-	add		r2, sp, #576
-	vld1.8		{d24-d25}, [r2, : 128]
-	vmlal.s32	q1, d30, d28
-	vadd.i64	q13, q0, q11
-	vadd.i64	q14, q5, q11
-	vmlal.s32	q6, d30, d9
-	vshr.s64	q4, q13, #26
-	vshr.s64	q13, q14, #26
-	vadd.i64	q7, q7, q4
-	vshl.i64	q4, q4, #26
-	vadd.i64	q14, q7, q3
-	vadd.i64	q9, q9, q13
-	vshl.i64	q13, q13, #26
-	vadd.i64	q15, q9, q3
-	vsub.i64	q0, q0, q4
-	vshr.s64	q4, q14, #25
-	vsub.i64	q5, q5, q13
-	vshr.s64	q13, q15, #25
-	vadd.i64	q6, q6, q4
-	vshl.i64	q4, q4, #25
-	vadd.i64	q14, q6, q11
-	vadd.i64	q2, q2, q13
-	vsub.i64	q4, q7, q4
-	vshr.s64	q7, q14, #26
-	vshl.i64	q13, q13, #25
-	vadd.i64	q14, q2, q11
-	vadd.i64	q8, q8, q7
-	vshl.i64	q7, q7, #26
-	vadd.i64	q15, q8, q3
-	vsub.i64	q9, q9, q13
-	vshr.s64	q13, q14, #26
-	vsub.i64	q6, q6, q7
-	vshr.s64	q7, q15, #25
-	vadd.i64	q10, q10, q13
-	vshl.i64	q13, q13, #26
-	vadd.i64	q14, q10, q3
-	vadd.i64	q1, q1, q7
-	add		r2, r3, #240
-	vshl.i64	q7, q7, #25
-	add		r4, r3, #144
-	vadd.i64	q15, q1, q11
-	add		r2, r2, #8
-	vsub.i64	q2, q2, q13
-	add		r4, r4, #8
-	vshr.s64	q13, q14, #25
-	vsub.i64	q7, q8, q7
-	vshr.s64	q8, q15, #26
-	vadd.i64	q14, q13, q13
-	vadd.i64	q12, q12, q8
-	vtrn.32		d12, d14
-	vshl.i64	q8, q8, #26
-	vtrn.32		d13, d15
-	vadd.i64	q3, q12, q3
-	vadd.i64	q0, q0, q14
-	vst1.8		d12, [r2, : 64]!
-	vshl.i64	q7, q13, #4
-	vst1.8		d13, [r4, : 64]!
-	vsub.i64	q1, q1, q8
-	vshr.s64	q3, q3, #25
-	vadd.i64	q0, q0, q7
-	vadd.i64	q5, q5, q3
-	vshl.i64	q3, q3, #25
-	vadd.i64	q6, q5, q11
-	vadd.i64	q0, q0, q13
-	vshl.i64	q7, q13, #25
-	vadd.i64	q8, q0, q11
-	vsub.i64	q3, q12, q3
-	vshr.s64	q6, q6, #26
-	vsub.i64	q7, q10, q7
-	vtrn.32		d2, d6
-	vshr.s64	q8, q8, #26
-	vtrn.32		d3, d7
-	vadd.i64	q3, q9, q6
-	vst1.8		d2, [r2, : 64]
-	vshl.i64	q6, q6, #26
-	vst1.8		d3, [r4, : 64]
-	vadd.i64	q1, q4, q8
-	vtrn.32		d4, d14
-	vshl.i64	q4, q8, #26
-	vtrn.32		d5, d15
-	vsub.i64	q5, q5, q6
-	add		r2, r2, #16
-	vsub.i64	q0, q0, q4
-	vst1.8		d4, [r2, : 64]
-	add		r4, r4, #16
-	vst1.8		d5, [r4, : 64]
-	vtrn.32		d10, d6
-	vtrn.32		d11, d7
-	sub		r2, r2, #8
-	sub		r4, r4, #8
-	vtrn.32		d0, d2
-	vtrn.32		d1, d3
-	vst1.8		d10, [r2, : 64]
-	vst1.8		d11, [r4, : 64]
-	sub		r2, r2, #24
-	sub		r4, r4, #24
-	vst1.8		d0, [r2, : 64]
-	vst1.8		d1, [r4, : 64]
-	ldr		r2, [sp, #456]
-	ldr		r4, [sp, #460]
-	subs		r5, r2, #1
-	bge		.Lmainloop
-	add		r1, r3, #144
-	add		r2, r3, #336
-	vld1.8		{d0-d1}, [r1, : 128]!
-	vld1.8		{d2-d3}, [r1, : 128]!
-	vld1.8		{d4}, [r1, : 64]
-	vst1.8		{d0-d1}, [r2, : 128]!
-	vst1.8		{d2-d3}, [r2, : 128]!
-	vst1.8		d4, [r2, : 64]
-	movw		r1, #0
-.Linvertloop:
-	add		r2, r3, #144
-	movw		r4, #0
-	movw		r5, #2
-	cmp		r1, #1
-	moveq		r5, #1
-	addeq		r2, r3, #336
-	addeq		r4, r3, #48
-	cmp		r1, #2
-	moveq		r5, #1
-	addeq		r2, r3, #48
-	cmp		r1, #3
-	moveq		r5, #5
-	addeq		r4, r3, #336
-	cmp		r1, #4
-	moveq		r5, #10
-	cmp		r1, #5
-	moveq		r5, #20
-	cmp		r1, #6
-	moveq		r5, #10
-	addeq		r2, r3, #336
-	addeq		r4, r3, #336
-	cmp		r1, #7
-	moveq		r5, #50
-	cmp		r1, #8
-	moveq		r5, #100
-	cmp		r1, #9
-	moveq		r5, #50
-	addeq		r2, r3, #336
-	cmp		r1, #10
-	moveq		r5, #5
-	addeq		r2, r3, #48
-	cmp		r1, #11
-	moveq		r5, #0
-	addeq		r2, r3, #96
-	add		r6, r3, #144
-	add		r7, r3, #288
-	vld1.8		{d0-d1}, [r6, : 128]!
-	vld1.8		{d2-d3}, [r6, : 128]!
-	vld1.8		{d4}, [r6, : 64]
-	vst1.8		{d0-d1}, [r7, : 128]!
-	vst1.8		{d2-d3}, [r7, : 128]!
-	vst1.8		d4, [r7, : 64]
-	cmp		r5, #0
-	beq		.Lskipsquaringloop
-.Lsquaringloop:
-	add		r6, r3, #288
-	add		r7, r3, #288
-	add		r8, r3, #288
-	vmov.i32	q0, #19
-	vmov.i32	q1, #0
-	vmov.i32	q2, #1
-	vzip.i32	q1, q2
-	vld1.8		{d4-d5}, [r7, : 128]!
-	vld1.8		{d6-d7}, [r7, : 128]!
-	vld1.8		{d9}, [r7, : 64]
-	vld1.8		{d10-d11}, [r6, : 128]!
-	add		r7, sp, #384
-	vld1.8		{d12-d13}, [r6, : 128]!
-	vmul.i32	q7, q2, q0
-	vld1.8		{d8}, [r6, : 64]
-	vext.32		d17, d11, d10, #1
-	vmul.i32	q9, q3, q0
-	vext.32		d16, d10, d8, #1
-	vshl.u32	q10, q5, q1
-	vext.32		d22, d14, d4, #1
-	vext.32		d24, d18, d6, #1
-	vshl.u32	q13, q6, q1
-	vshl.u32	d28, d8, d2
-	vrev64.i32	d22, d22
-	vmul.i32	d1, d9, d1
-	vrev64.i32	d24, d24
-	vext.32		d29, d8, d13, #1
-	vext.32		d0, d1, d9, #1
-	vrev64.i32	d0, d0
-	vext.32		d2, d9, d1, #1
-	vext.32		d23, d15, d5, #1
-	vmull.s32	q4, d20, d4
-	vrev64.i32	d23, d23
-	vmlal.s32	q4, d21, d1
-	vrev64.i32	d2, d2
-	vmlal.s32	q4, d26, d19
-	vext.32		d3, d5, d15, #1
-	vmlal.s32	q4, d27, d18
-	vrev64.i32	d3, d3
-	vmlal.s32	q4, d28, d15
-	vext.32		d14, d12, d11, #1
-	vmull.s32	q5, d16, d23
-	vext.32		d15, d13, d12, #1
-	vmlal.s32	q5, d17, d4
-	vst1.8		d8, [r7, : 64]!
-	vmlal.s32	q5, d14, d1
-	vext.32		d12, d9, d8, #0
-	vmlal.s32	q5, d15, d19
-	vmov.i64	d13, #0
-	vmlal.s32	q5, d29, d18
-	vext.32		d25, d19, d7, #1
-	vmlal.s32	q6, d20, d5
-	vrev64.i32	d25, d25
-	vmlal.s32	q6, d21, d4
-	vst1.8		d11, [r7, : 64]!
-	vmlal.s32	q6, d26, d1
-	vext.32		d9, d10, d10, #0
-	vmlal.s32	q6, d27, d19
-	vmov.i64	d8, #0
-	vmlal.s32	q6, d28, d18
-	vmlal.s32	q4, d16, d24
-	vmlal.s32	q4, d17, d5
-	vmlal.s32	q4, d14, d4
-	vst1.8		d12, [r7, : 64]!
-	vmlal.s32	q4, d15, d1
-	vext.32		d10, d13, d12, #0
-	vmlal.s32	q4, d29, d19
-	vmov.i64	d11, #0
-	vmlal.s32	q5, d20, d6
-	vmlal.s32	q5, d21, d5
-	vmlal.s32	q5, d26, d4
-	vext.32		d13, d8, d8, #0
-	vmlal.s32	q5, d27, d1
-	vmov.i64	d12, #0
-	vmlal.s32	q5, d28, d19
-	vst1.8		d9, [r7, : 64]!
-	vmlal.s32	q6, d16, d25
-	vmlal.s32	q6, d17, d6
-	vst1.8		d10, [r7, : 64]
-	vmlal.s32	q6, d14, d5
-	vext.32		d8, d11, d10, #0
-	vmlal.s32	q6, d15, d4
-	vmov.i64	d9, #0
-	vmlal.s32	q6, d29, d1
-	vmlal.s32	q4, d20, d7
-	vmlal.s32	q4, d21, d6
-	vmlal.s32	q4, d26, d5
-	vext.32		d11, d12, d12, #0
-	vmlal.s32	q4, d27, d4
-	vmov.i64	d10, #0
-	vmlal.s32	q4, d28, d1
-	vmlal.s32	q5, d16, d0
-	sub		r6, r7, #32
-	vmlal.s32	q5, d17, d7
-	vmlal.s32	q5, d14, d6
-	vext.32		d30, d9, d8, #0
-	vmlal.s32	q5, d15, d5
-	vld1.8		{d31}, [r6, : 64]!
-	vmlal.s32	q5, d29, d4
-	vmlal.s32	q15, d20, d0
-	vext.32		d0, d6, d18, #1
-	vmlal.s32	q15, d21, d25
-	vrev64.i32	d0, d0
-	vmlal.s32	q15, d26, d24
-	vext.32		d1, d7, d19, #1
-	vext.32		d7, d10, d10, #0
-	vmlal.s32	q15, d27, d23
-	vrev64.i32	d1, d1
-	vld1.8		{d6}, [r6, : 64]
-	vmlal.s32	q15, d28, d22
-	vmlal.s32	q3, d16, d4
-	add		r6, r6, #24
-	vmlal.s32	q3, d17, d2
-	vext.32		d4, d31, d30, #0
-	vmov		d17, d11
-	vmlal.s32	q3, d14, d1
-	vext.32		d11, d13, d13, #0
-	vext.32		d13, d30, d30, #0
-	vmlal.s32	q3, d15, d0
-	vext.32		d1, d8, d8, #0
-	vmlal.s32	q3, d29, d3
-	vld1.8		{d5}, [r6, : 64]
-	sub		r6, r6, #16
-	vext.32		d10, d6, d6, #0
-	vmov.i32	q1, #0xffffffff
-	vshl.i64	q4, q1, #25
-	add		r7, sp, #480
-	vld1.8		{d14-d15}, [r7, : 128]
-	vadd.i64	q9, q2, q7
-	vshl.i64	q1, q1, #26
-	vshr.s64	q10, q9, #26
-	vld1.8		{d0}, [r6, : 64]!
-	vadd.i64	q5, q5, q10
-	vand		q9, q9, q1
-	vld1.8		{d16}, [r6, : 64]!
-	add		r6, sp, #496
-	vld1.8		{d20-d21}, [r6, : 128]
-	vadd.i64	q11, q5, q10
-	vsub.i64	q2, q2, q9
-	vshr.s64	q9, q11, #25
-	vext.32		d12, d5, d4, #0
-	vand		q11, q11, q4
-	vadd.i64	q0, q0, q9
-	vmov		d19, d7
-	vadd.i64	q3, q0, q7
-	vsub.i64	q5, q5, q11
-	vshr.s64	q11, q3, #26
-	vext.32		d18, d11, d10, #0
-	vand		q3, q3, q1
-	vadd.i64	q8, q8, q11
-	vadd.i64	q11, q8, q10
-	vsub.i64	q0, q0, q3
-	vshr.s64	q3, q11, #25
-	vand		q11, q11, q4
-	vadd.i64	q3, q6, q3
-	vadd.i64	q6, q3, q7
-	vsub.i64	q8, q8, q11
-	vshr.s64	q11, q6, #26
-	vand		q6, q6, q1
-	vadd.i64	q9, q9, q11
-	vadd.i64	d25, d19, d21
-	vsub.i64	q3, q3, q6
-	vshr.s64	d23, d25, #25
-	vand		q4, q12, q4
-	vadd.i64	d21, d23, d23
-	vshl.i64	d25, d23, #4
-	vadd.i64	d21, d21, d23
-	vadd.i64	d25, d25, d21
-	vadd.i64	d4, d4, d25
-	vzip.i32	q0, q8
-	vadd.i64	d12, d4, d14
-	add		r6, r8, #8
-	vst1.8		d0, [r6, : 64]
-	vsub.i64	d19, d19, d9
-	add		r6, r6, #16
-	vst1.8		d16, [r6, : 64]
-	vshr.s64	d22, d12, #26
-	vand		q0, q6, q1
-	vadd.i64	d10, d10, d22
-	vzip.i32	q3, q9
-	vsub.i64	d4, d4, d0
-	sub		r6, r6, #8
-	vst1.8		d6, [r6, : 64]
-	add		r6, r6, #16
-	vst1.8		d18, [r6, : 64]
-	vzip.i32	q2, q5
-	sub		r6, r6, #32
-	vst1.8		d4, [r6, : 64]
-	subs		r5, r5, #1
-	bhi		.Lsquaringloop
-.Lskipsquaringloop:
-	mov		r2, r2
-	add		r5, r3, #288
-	add		r6, r3, #144
-	vmov.i32	q0, #19
-	vmov.i32	q1, #0
-	vmov.i32	q2, #1
-	vzip.i32	q1, q2
-	vld1.8		{d4-d5}, [r5, : 128]!
-	vld1.8		{d6-d7}, [r5, : 128]!
-	vld1.8		{d9}, [r5, : 64]
-	vld1.8		{d10-d11}, [r2, : 128]!
-	add		r5, sp, #384
-	vld1.8		{d12-d13}, [r2, : 128]!
-	vmul.i32	q7, q2, q0
-	vld1.8		{d8}, [r2, : 64]
-	vext.32		d17, d11, d10, #1
-	vmul.i32	q9, q3, q0
-	vext.32		d16, d10, d8, #1
-	vshl.u32	q10, q5, q1
-	vext.32		d22, d14, d4, #1
-	vext.32		d24, d18, d6, #1
-	vshl.u32	q13, q6, q1
-	vshl.u32	d28, d8, d2
-	vrev64.i32	d22, d22
-	vmul.i32	d1, d9, d1
-	vrev64.i32	d24, d24
-	vext.32		d29, d8, d13, #1
-	vext.32		d0, d1, d9, #1
-	vrev64.i32	d0, d0
-	vext.32		d2, d9, d1, #1
-	vext.32		d23, d15, d5, #1
-	vmull.s32	q4, d20, d4
-	vrev64.i32	d23, d23
-	vmlal.s32	q4, d21, d1
-	vrev64.i32	d2, d2
-	vmlal.s32	q4, d26, d19
-	vext.32		d3, d5, d15, #1
-	vmlal.s32	q4, d27, d18
-	vrev64.i32	d3, d3
-	vmlal.s32	q4, d28, d15
-	vext.32		d14, d12, d11, #1
-	vmull.s32	q5, d16, d23
-	vext.32		d15, d13, d12, #1
-	vmlal.s32	q5, d17, d4
-	vst1.8		d8, [r5, : 64]!
-	vmlal.s32	q5, d14, d1
-	vext.32		d12, d9, d8, #0
-	vmlal.s32	q5, d15, d19
-	vmov.i64	d13, #0
-	vmlal.s32	q5, d29, d18
-	vext.32		d25, d19, d7, #1
-	vmlal.s32	q6, d20, d5
-	vrev64.i32	d25, d25
-	vmlal.s32	q6, d21, d4
-	vst1.8		d11, [r5, : 64]!
-	vmlal.s32	q6, d26, d1
-	vext.32		d9, d10, d10, #0
-	vmlal.s32	q6, d27, d19
-	vmov.i64	d8, #0
-	vmlal.s32	q6, d28, d18
-	vmlal.s32	q4, d16, d24
-	vmlal.s32	q4, d17, d5
-	vmlal.s32	q4, d14, d4
-	vst1.8		d12, [r5, : 64]!
-	vmlal.s32	q4, d15, d1
-	vext.32		d10, d13, d12, #0
-	vmlal.s32	q4, d29, d19
-	vmov.i64	d11, #0
-	vmlal.s32	q5, d20, d6
-	vmlal.s32	q5, d21, d5
-	vmlal.s32	q5, d26, d4
-	vext.32		d13, d8, d8, #0
-	vmlal.s32	q5, d27, d1
-	vmov.i64	d12, #0
-	vmlal.s32	q5, d28, d19
-	vst1.8		d9, [r5, : 64]!
-	vmlal.s32	q6, d16, d25
-	vmlal.s32	q6, d17, d6
-	vst1.8		d10, [r5, : 64]
-	vmlal.s32	q6, d14, d5
-	vext.32		d8, d11, d10, #0
-	vmlal.s32	q6, d15, d4
-	vmov.i64	d9, #0
-	vmlal.s32	q6, d29, d1
-	vmlal.s32	q4, d20, d7
-	vmlal.s32	q4, d21, d6
-	vmlal.s32	q4, d26, d5
-	vext.32		d11, d12, d12, #0
-	vmlal.s32	q4, d27, d4
-	vmov.i64	d10, #0
-	vmlal.s32	q4, d28, d1
-	vmlal.s32	q5, d16, d0
-	sub		r2, r5, #32
-	vmlal.s32	q5, d17, d7
-	vmlal.s32	q5, d14, d6
-	vext.32		d30, d9, d8, #0
-	vmlal.s32	q5, d15, d5
-	vld1.8		{d31}, [r2, : 64]!
-	vmlal.s32	q5, d29, d4
-	vmlal.s32	q15, d20, d0
-	vext.32		d0, d6, d18, #1
-	vmlal.s32	q15, d21, d25
-	vrev64.i32	d0, d0
-	vmlal.s32	q15, d26, d24
-	vext.32		d1, d7, d19, #1
-	vext.32		d7, d10, d10, #0
-	vmlal.s32	q15, d27, d23
-	vrev64.i32	d1, d1
-	vld1.8		{d6}, [r2, : 64]
-	vmlal.s32	q15, d28, d22
-	vmlal.s32	q3, d16, d4
-	add		r2, r2, #24
-	vmlal.s32	q3, d17, d2
-	vext.32		d4, d31, d30, #0
-	vmov		d17, d11
-	vmlal.s32	q3, d14, d1
-	vext.32		d11, d13, d13, #0
-	vext.32		d13, d30, d30, #0
-	vmlal.s32	q3, d15, d0
-	vext.32		d1, d8, d8, #0
-	vmlal.s32	q3, d29, d3
-	vld1.8		{d5}, [r2, : 64]
-	sub		r2, r2, #16
-	vext.32		d10, d6, d6, #0
-	vmov.i32	q1, #0xffffffff
-	vshl.i64	q4, q1, #25
-	add		r5, sp, #480
-	vld1.8		{d14-d15}, [r5, : 128]
-	vadd.i64	q9, q2, q7
-	vshl.i64	q1, q1, #26
-	vshr.s64	q10, q9, #26
-	vld1.8		{d0}, [r2, : 64]!
-	vadd.i64	q5, q5, q10
-	vand		q9, q9, q1
-	vld1.8		{d16}, [r2, : 64]!
-	add		r2, sp, #496
-	vld1.8		{d20-d21}, [r2, : 128]
-	vadd.i64	q11, q5, q10
-	vsub.i64	q2, q2, q9
-	vshr.s64	q9, q11, #25
-	vext.32		d12, d5, d4, #0
-	vand		q11, q11, q4
-	vadd.i64	q0, q0, q9
-	vmov		d19, d7
-	vadd.i64	q3, q0, q7
-	vsub.i64	q5, q5, q11
-	vshr.s64	q11, q3, #26
-	vext.32		d18, d11, d10, #0
-	vand		q3, q3, q1
-	vadd.i64	q8, q8, q11
-	vadd.i64	q11, q8, q10
-	vsub.i64	q0, q0, q3
-	vshr.s64	q3, q11, #25
-	vand		q11, q11, q4
-	vadd.i64	q3, q6, q3
-	vadd.i64	q6, q3, q7
-	vsub.i64	q8, q8, q11
-	vshr.s64	q11, q6, #26
-	vand		q6, q6, q1
-	vadd.i64	q9, q9, q11
-	vadd.i64	d25, d19, d21
-	vsub.i64	q3, q3, q6
-	vshr.s64	d23, d25, #25
-	vand		q4, q12, q4
-	vadd.i64	d21, d23, d23
-	vshl.i64	d25, d23, #4
-	vadd.i64	d21, d21, d23
-	vadd.i64	d25, d25, d21
-	vadd.i64	d4, d4, d25
-	vzip.i32	q0, q8
-	vadd.i64	d12, d4, d14
-	add		r2, r6, #8
-	vst1.8		d0, [r2, : 64]
-	vsub.i64	d19, d19, d9
-	add		r2, r2, #16
-	vst1.8		d16, [r2, : 64]
-	vshr.s64	d22, d12, #26
-	vand		q0, q6, q1
-	vadd.i64	d10, d10, d22
-	vzip.i32	q3, q9
-	vsub.i64	d4, d4, d0
-	sub		r2, r2, #8
-	vst1.8		d6, [r2, : 64]
-	add		r2, r2, #16
-	vst1.8		d18, [r2, : 64]
-	vzip.i32	q2, q5
-	sub		r2, r2, #32
-	vst1.8		d4, [r2, : 64]
-	cmp		r4, #0
-	beq		.Lskippostcopy
-	add		r2, r3, #144
-	mov		r4, r4
-	vld1.8		{d0-d1}, [r2, : 128]!
-	vld1.8		{d2-d3}, [r2, : 128]!
-	vld1.8		{d4}, [r2, : 64]
-	vst1.8		{d0-d1}, [r4, : 128]!
-	vst1.8		{d2-d3}, [r4, : 128]!
-	vst1.8		d4, [r4, : 64]
-.Lskippostcopy:
-	cmp		r1, #1
-	bne		.Lskipfinalcopy
-	add		r2, r3, #288
-	add		r4, r3, #144
-	vld1.8		{d0-d1}, [r2, : 128]!
-	vld1.8		{d2-d3}, [r2, : 128]!
-	vld1.8		{d4}, [r2, : 64]
-	vst1.8		{d0-d1}, [r4, : 128]!
-	vst1.8		{d2-d3}, [r4, : 128]!
-	vst1.8		d4, [r4, : 64]
-.Lskipfinalcopy:
-	add		r1, r1, #1
-	cmp		r1, #12
-	blo		.Linvertloop
-	add		r1, r3, #144
-	ldr		r2, [r1], #4
-	ldr		r3, [r1], #4
-	ldr		r4, [r1], #4
-	ldr		r5, [r1], #4
-	ldr		r6, [r1], #4
-	ldr		r7, [r1], #4
-	ldr		r8, [r1], #4
-	ldr		r9, [r1], #4
-	ldr		r10, [r1], #4
-	ldr		r1, [r1]
-	add		r11, r1, r1, LSL #4
-	add		r11, r11, r1, LSL #1
-	add		r11, r11, #16777216
-	mov		r11, r11, ASR #25
-	add		r11, r11, r2
-	mov		r11, r11, ASR #26
-	add		r11, r11, r3
-	mov		r11, r11, ASR #25
-	add		r11, r11, r4
-	mov		r11, r11, ASR #26
-	add		r11, r11, r5
-	mov		r11, r11, ASR #25
-	add		r11, r11, r6
-	mov		r11, r11, ASR #26
-	add		r11, r11, r7
-	mov		r11, r11, ASR #25
-	add		r11, r11, r8
-	mov		r11, r11, ASR #26
-	add		r11, r11, r9
-	mov		r11, r11, ASR #25
-	add		r11, r11, r10
-	mov		r11, r11, ASR #26
-	add		r11, r11, r1
-	mov		r11, r11, ASR #25
-	add		r2, r2, r11
-	add		r2, r2, r11, LSL #1
-	add		r2, r2, r11, LSL #4
-	mov		r11, r2, ASR #26
-	add		r3, r3, r11
-	sub		r2, r2, r11, LSL #26
-	mov		r11, r3, ASR #25
-	add		r4, r4, r11
-	sub		r3, r3, r11, LSL #25
-	mov		r11, r4, ASR #26
-	add		r5, r5, r11
-	sub		r4, r4, r11, LSL #26
-	mov		r11, r5, ASR #25
-	add		r6, r6, r11
-	sub		r5, r5, r11, LSL #25
-	mov		r11, r6, ASR #26
-	add		r7, r7, r11
-	sub		r6, r6, r11, LSL #26
-	mov		r11, r7, ASR #25
-	add		r8, r8, r11
-	sub		r7, r7, r11, LSL #25
-	mov		r11, r8, ASR #26
-	add		r9, r9, r11
-	sub		r8, r8, r11, LSL #26
-	mov		r11, r9, ASR #25
-	add		r10, r10, r11
-	sub		r9, r9, r11, LSL #25
-	mov		r11, r10, ASR #26
-	add		r1, r1, r11
-	sub		r10, r10, r11, LSL #26
-	mov		r11, r1, ASR #25
-	sub		r1, r1, r11, LSL #25
-	add		r2, r2, r3, LSL #26
-	mov		r3, r3, LSR #6
-	add		r3, r3, r4, LSL #19
-	mov		r4, r4, LSR #13
-	add		r4, r4, r5, LSL #13
-	mov		r5, r5, LSR #19
-	add		r5, r5, r6, LSL #6
-	add		r6, r7, r8, LSL #25
-	mov		r7, r8, LSR #7
-	add		r7, r7, r9, LSL #19
-	mov		r8, r9, LSR #13
-	add		r8, r8, r10, LSL #12
-	mov		r9, r10, LSR #20
-	add		r1, r9, r1, LSL #6
-	str		r2, [r0]
-	str		r3, [r0, #4]
-	str		r4, [r0, #8]
-	str		r5, [r0, #12]
-	str		r6, [r0, #16]
-	str		r7, [r0, #20]
-	str		r8, [r0, #24]
-	str		r1, [r0, #28]
-	movw		r0, #0
-	mov		sp, ip
-	pop		{r4-r11, pc}
-ENDPROC(curve25519_neon)
diff --git a/arch/arm/crypto/curve25519-glue.c b/arch/arm/crypto/curve25519-glue.c
deleted file mode 100644
index e7b87e09dd99..000000000000
--- a/arch/arm/crypto/curve25519-glue.c
+++ /dev/null
@@ -1,137 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-/*
- * Copyright (C) 2015-2019 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
- *
- * Based on public domain code from Daniel J. Bernstein and Peter Schwabe. This
- * began from SUPERCOP's curve25519/neon2/scalarmult.s, but has subsequently been
- * manually reworked for use in kernel space.
- */
-
-#include <asm/hwcap.h>
-#include <asm/neon.h>
-#include <asm/simd.h>
-#include <crypto/internal/kpp.h>
-#include <crypto/internal/simd.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/jump_label.h>
-#include <linux/scatterlist.h>
-#include <crypto/curve25519.h>
-
-asmlinkage void curve25519_neon(u8 mypublic[CURVE25519_KEY_SIZE],
-				const u8 secret[CURVE25519_KEY_SIZE],
-				const u8 basepoint[CURVE25519_KEY_SIZE]);
-
-static __ro_after_init DEFINE_STATIC_KEY_FALSE(have_neon);
-
-void curve25519_arch(u8 out[CURVE25519_KEY_SIZE],
-		     const u8 scalar[CURVE25519_KEY_SIZE],
-		     const u8 point[CURVE25519_KEY_SIZE])
-{
-	if (static_branch_likely(&have_neon) && crypto_simd_usable()) {
-		kernel_neon_begin();
-		curve25519_neon(out, scalar, point);
-		kernel_neon_end();
-	} else {
-		curve25519_generic(out, scalar, point);
-	}
-}
-EXPORT_SYMBOL(curve25519_arch);
-
-void curve25519_base_arch(u8 pub[CURVE25519_KEY_SIZE],
-			  const u8 secret[CURVE25519_KEY_SIZE])
-{
-	return curve25519_arch(pub, secret, curve25519_base_point);
-}
-EXPORT_SYMBOL(curve25519_base_arch);
-
-static int curve25519_set_secret(struct crypto_kpp *tfm, const void *buf,
-				 unsigned int len)
-{
-	u8 *secret = kpp_tfm_ctx(tfm);
-
-	if (!len)
-		curve25519_generate_secret(secret);
-	else if (len == CURVE25519_KEY_SIZE &&
-		 crypto_memneq(buf, curve25519_null_point, CURVE25519_KEY_SIZE))
-		memcpy(secret, buf, CURVE25519_KEY_SIZE);
-	else
-		return -EINVAL;
-	return 0;
-}
-
-static int curve25519_compute_value(struct kpp_request *req)
-{
-	struct crypto_kpp *tfm = crypto_kpp_reqtfm(req);
-	const u8 *secret = kpp_tfm_ctx(tfm);
-	u8 public_key[CURVE25519_KEY_SIZE];
-	u8 buf[CURVE25519_KEY_SIZE];
-	int copied, nbytes;
-	u8 const *bp;
-
-	if (req->src) {
-		copied = sg_copy_to_buffer(req->src,
-					   sg_nents_for_len(req->src,
-							    CURVE25519_KEY_SIZE),
-					   public_key, CURVE25519_KEY_SIZE);
-		if (copied != CURVE25519_KEY_SIZE)
-			return -EINVAL;
-		bp = public_key;
-	} else {
-		bp = curve25519_base_point;
-	}
-
-	curve25519_arch(buf, secret, bp);
-
-	/* might want less than we've got */
-	nbytes = min_t(size_t, CURVE25519_KEY_SIZE, req->dst_len);
-	copied = sg_copy_from_buffer(req->dst, sg_nents_for_len(req->dst,
-								nbytes),
-				     buf, nbytes);
-	if (copied != nbytes)
-		return -EINVAL;
-	return 0;
-}
-
-static unsigned int curve25519_max_size(struct crypto_kpp *tfm)
-{
-	return CURVE25519_KEY_SIZE;
-}
-
-static struct kpp_alg curve25519_alg = {
-	.base.cra_name		= "curve25519",
-	.base.cra_driver_name	= "curve25519-neon",
-	.base.cra_priority	= 200,
-	.base.cra_module	= THIS_MODULE,
-	.base.cra_ctxsize	= CURVE25519_KEY_SIZE,
-
-	.set_secret		= curve25519_set_secret,
-	.generate_public_key	= curve25519_compute_value,
-	.compute_shared_secret	= curve25519_compute_value,
-	.max_size		= curve25519_max_size,
-};
-
-static int __init arm_curve25519_init(void)
-{
-	if (elf_hwcap & HWCAP_NEON) {
-		static_branch_enable(&have_neon);
-		return IS_REACHABLE(CONFIG_CRYPTO_KPP) ?
-			crypto_register_kpp(&curve25519_alg) : 0;
-	}
-	return 0;
-}
-
-static void __exit arm_curve25519_exit(void)
-{
-	if (IS_REACHABLE(CONFIG_CRYPTO_KPP) && elf_hwcap & HWCAP_NEON)
-		crypto_unregister_kpp(&curve25519_alg);
-}
-
-module_init(arm_curve25519_init);
-module_exit(arm_curve25519_exit);
-
-MODULE_ALIAS_CRYPTO("curve25519");
-MODULE_ALIAS_CRYPTO("curve25519-neon");
-MODULE_DESCRIPTION("Public key crypto: Curve25519 (NEON-accelerated)");
-MODULE_LICENSE("GPL v2");
diff --git a/arch/arm/include/asm/floppy.h b/arch/arm/include/asm/floppy.h
index e1cb04ed5008..e579f77162e9 100644
--- a/arch/arm/include/asm/floppy.h
+++ b/arch/arm/include/asm/floppy.h
@@ -65,8 +65,6 @@ static unsigned char floppy_selects[4] = { 0x10, 0x21, 0x23, 0x33 };
 #define N_FDC 1
 #define N_DRIVE 4
 
-#define CROSS_64KB(a,s) (0)
-
 /*
  * This allows people to reverse the order of
  * fd0 and fd1, in case their hardware is
diff --git a/arch/arm/include/asm/stacktrace.h b/arch/arm/include/asm/stacktrace.h
index f80a85b091d6..ba2f771cca23 100644
--- a/arch/arm/include/asm/stacktrace.h
+++ b/arch/arm/include/asm/stacktrace.h
@@ -2,8 +2,9 @@
 #ifndef __ASM_STACKTRACE_H
 #define __ASM_STACKTRACE_H
 
-#include <asm/ptrace.h>
 #include <linux/llist.h>
+#include <asm/ptrace.h>
+#include <asm/sections.h>
 
 struct stackframe {
 	/*
diff --git a/arch/arm/include/asm/vdso/vsyscall.h b/arch/arm/include/asm/vdso/vsyscall.h
index 4e7226ad02ec..ff1c729af05f 100644
--- a/arch/arm/include/asm/vdso/vsyscall.h
+++ b/arch/arm/include/asm/vdso/vsyscall.h
@@ -7,8 +7,6 @@
 #include <vdso/datapage.h>
 #include <asm/cacheflush.h>
 
-extern bool cntvct_ok;
-
 static __always_inline
 void __arch_sync_vdso_time_data(struct vdso_time_data *vdata)
 {
diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c
index 123f4a8ef446..2101938d27fc 100644
--- a/arch/arm/kernel/asm-offsets.c
+++ b/arch/arm/kernel/asm-offsets.c
@@ -7,6 +7,8 @@
  * This code generates raw asm output which is post-processed to extract
  * and format the required data.
  */
+#define COMPILE_OFFSETS
+
 #include <linux/compiler.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
diff --git a/arch/arm/kernel/hw_breakpoint.c b/arch/arm/kernel/hw_breakpoint.c
index a12efd0f43e8..cd4b34c96e35 100644
--- a/arch/arm/kernel/hw_breakpoint.c
+++ b/arch/arm/kernel/hw_breakpoint.c
@@ -904,7 +904,7 @@ unlock:
 	watchpoint_single_step_handler(addr);
 }
 
-#ifdef CONFIG_CFI_CLANG
+#ifdef CONFIG_CFI
 static void hw_breakpoint_cfi_handler(struct pt_regs *regs)
 {
 	/*
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index da488d92e7a0..55ca3fcd37e8 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -484,7 +484,7 @@ module_arch_cleanup(struct module *mod)
 #endif
 }
 
-void __weak module_arch_freeing_init(struct module *mod)
+void module_arch_freeing_init(struct module *mod)
 {
 #ifdef CONFIG_ARM_UNWIND
 	struct unwind_table *init = mod->arch.init_table;
diff --git a/arch/arm/kernel/process.c b/arch/arm/kernel/process.c
index e16ed102960c..d7aa95225c70 100644
--- a/arch/arm/kernel/process.c
+++ b/arch/arm/kernel/process.c
@@ -234,7 +234,7 @@ asmlinkage void ret_from_fork(void) __asm__("ret_from_fork");
 
 int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
-	unsigned long clone_flags = args->flags;
+	u64 clone_flags = args->flags;
 	unsigned long stack_start = args->stack;
 	unsigned long tls = args->tls;
 	struct thread_info *thread = task_thread_info(p);
diff --git a/arch/arm/kernel/vdso.c b/arch/arm/kernel/vdso.c
index 325448ffbba0..e38a30477f3d 100644
--- a/arch/arm/kernel/vdso.c
+++ b/arch/arm/kernel/vdso.c
@@ -54,11 +54,9 @@ struct elfinfo {
 	char		*dynstr;	/* ptr to .dynstr section */
 };
 
-/* Cached result of boot-time check for whether the arch timer exists,
- * and if so, whether the virtual counter is useable.
+/* Boot-time check for whether the arch timer exists, and if so,
+ * whether the virtual counter is usable.
  */
-bool cntvct_ok __ro_after_init;
-
 static bool __init cntvct_functional(void)
 {
 	struct device_node *np;
@@ -159,7 +157,7 @@ static void __init patch_vdso(void *ehdr)
 	 * want programs to incur the slight additional overhead of
 	 * dispatching through the VDSO only to fall back to syscalls.
 	 */
-	if (!cntvct_ok) {
+	if (!cntvct_functional()) {
 		vdso_nullpatch_one(&einfo, "__vdso_gettimeofday");
 		vdso_nullpatch_one(&einfo, "__vdso_clock_gettime");
 		vdso_nullpatch_one(&einfo, "__vdso_clock_gettime64");
@@ -197,8 +195,6 @@ static int __init vdso_init(void)
 	vdso_total_pages = VDSO_NR_PAGES; /* for the data/vvar pages */
 	vdso_total_pages += text_pages;
 
-	cntvct_ok = cntvct_functional();
-
 	patch_vdso(vdso_start);
 
 	return 0;
diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
index 04bd91c72521..c5ef27e3cd8f 100644
--- a/arch/arm/mach-at91/Kconfig
+++ b/arch/arm/mach-at91/Kconfig
@@ -1,4 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0-only
+config ARCH_MICROCHIP
+	bool
+
 menuconfig ARCH_AT91
 	bool "AT91/Microchip SoCs"
 	depends on (CPU_LITTLE_ENDIAN && (ARCH_MULTI_V4T || ARCH_MULTI_V5)) || \
@@ -8,6 +11,7 @@ menuconfig ARCH_AT91
 	select GPIOLIB
 	select PINCTRL
 	select SOC_BUS
+	select ARCH_MICROCHIP
 
 if ARCH_AT91
 config SOC_SAMV7
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 3aa20038ad93..35058b99069c 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -1364,7 +1364,7 @@ static const struct pmc_info pmc_infos[] __initconst = {
 		.version = AT91_PMC_V1,
 	},
 	{
-		.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP,
+		.uhp_udp_mask = AT91SAM926x_PMC_UHP,
 		.mckr = 0x28,
 		.version = AT91_PMC_V2,
 	},
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index e23b86834096..2e639f9ed648 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -87,29 +87,6 @@ tmp3	.req	r6
 
 	.endm
 
-/**
- * Set state for 2.5V low power regulator
- * @ena: 0 - disable regulator
- *	 1 - enable regulator
- *
- * Side effects: overwrites r7, r8, r9, r10
- */
-	.macro at91_2_5V_reg_set_low_power ena
-#ifdef CONFIG_SOC_SAMA7
-	ldr	r7, .sfrbu
-	mov	r8, #\ena
-	ldr	r9, [r7, #AT91_SFRBU_25LDOCR]
-	orr	r9, r9, #AT91_SFRBU_25LDOCR_LP
-	cmp	r8, #1
-	beq	lp_done_\ena
-	bic	r9, r9, #AT91_SFRBU_25LDOCR_LP
-lp_done_\ena:
-	ldr	r10, =AT91_SFRBU_25LDOCR_LDOANAKEY
-	orr	r9, r9, r10
-	str	r9, [r7, #AT91_SFRBU_25LDOCR]
-#endif
-	.endm
-
 	.macro at91_backup_set_lpm reg
 #ifdef CONFIG_SOC_SAMA7
 	orr	\reg, \reg, #0x200000
@@ -689,6 +666,10 @@ sr_dis_exit:
 	bic	tmp2, tmp2, #AT91_PMC_PLL_UPDT_ID
 	str	tmp2, [pmc, #AT91_PMC_PLL_UPDT]
 
+	/* save acr */
+	ldr	tmp2, [pmc, #AT91_PMC_PLL_ACR]
+	str	tmp2, .saved_acr
+
 	/* save div. */
 	mov	tmp1, #0
 	ldr	tmp2, [pmc, #AT91_PMC_PLL_CTRL0]
@@ -758,7 +739,7 @@ sr_dis_exit:
 	str	tmp1, [pmc, #AT91_PMC_PLL_UPDT]
 
 	/* step 2. */
-	ldr	tmp1, =AT91_PMC_PLL_ACR_DEFAULT_PLLA
+	ldr	tmp1, .saved_acr
 	str	tmp1, [pmc, #AT91_PMC_PLL_ACR]
 
 	/* step 3. */
@@ -904,7 +885,7 @@ e_done:
 /**
  * at91_mckx_ps_restore: restore MCKx settings
  *
- * Side effects: overwrites tmp1, tmp2
+ * Side effects: overwrites tmp1, tmp2 and tmp3
  */
 .macro at91_mckx_ps_restore
 #ifdef CONFIG_SOC_SAMA7
@@ -980,7 +961,7 @@ r_ps:
 	bic	tmp3, tmp3, #AT91_PMC_MCR_V2_ID_MSK
 	orr	tmp3, tmp3, tmp1
 	orr	tmp3, tmp3, #AT91_PMC_MCR_V2_CMD
-	str	tmp2, [pmc, #AT91_PMC_MCR_V2]
+	str	tmp3, [pmc, #AT91_PMC_MCR_V2]
 
 	wait_mckrdy tmp1
 
@@ -1019,9 +1000,6 @@ save_mck:
 
 	at91_plla_disable
 
-	/* Enable low power mode for 2.5V regulator. */
-	at91_2_5V_reg_set_low_power 1
-
 	ldr	tmp3, .pm_mode
 	cmp	tmp3, #AT91_PM_ULP1
 	beq	ulp1_mode
@@ -1034,9 +1012,6 @@ ulp1_mode:
 	b	ulp_exit
 
 ulp_exit:
-	/* Disable low power mode for 2.5V regulator. */
-	at91_2_5V_reg_set_low_power 0
-
 	ldr	pmc, .pmc_base
 
 	at91_plla_enable
@@ -1207,6 +1182,8 @@ ENDPROC(at91_pm_suspend_in_sram)
 #endif
 .saved_mckr:
 	.word 0
+.saved_acr:
+	.word 0
 .saved_pllar:
 	.word 0
 .saved_sam9_lpr:
diff --git a/arch/arm/mach-hpe/Kconfig b/arch/arm/mach-hpe/Kconfig
deleted file mode 100644
index 3372bbf38d38..000000000000
--- a/arch/arm/mach-hpe/Kconfig
+++ /dev/null
@@ -1,23 +0,0 @@
-menuconfig ARCH_HPE
-	bool "HPE SoC support"
-	depends on ARCH_MULTI_V7
-	help
-	  This enables support for HPE ARM based BMC chips.
-if ARCH_HPE
-
-config ARCH_HPE_GXP
-	bool "HPE GXP SoC"
-	depends on ARCH_MULTI_V7
-	select ARM_VIC
-	select GENERIC_IRQ_CHIP
-	select CLKSRC_MMIO
-	help
-	  HPE GXP is the name of the HPE Soc. This SoC is used to implement many
-	  BMC features at HPE. It supports ARMv7 architecture based on the Cortex
-	  A9 core. It is capable of using an AXI bus to which a memory controller
-	  is attached. It has multiple SPI interfaces to connect boot flash and
-	  BIOS flash. It uses a 10/100/1000 MAC for network connectivity. It
-	  has multiple i2c engines to drive connectivity with a host
-	  infrastructure.
-
-endif
diff --git a/arch/arm/mach-hpe/Makefile b/arch/arm/mach-hpe/Makefile
deleted file mode 100644
index 8b0a91234df4..000000000000
--- a/arch/arm/mach-hpe/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-$(CONFIG_ARCH_HPE_GXP) += gxp.o
diff --git a/arch/arm/mach-hpe/gxp.c b/arch/arm/mach-hpe/gxp.c
deleted file mode 100644
index 581c8da517b8..000000000000
--- a/arch/arm/mach-hpe/gxp.c
+++ /dev/null
@@ -1,15 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/* Copyright (C) 2022 Hewlett-Packard Enterprise Development Company, L.P. */
-
-#include <asm/mach/arch.h>
-
-static const char * const gxp_board_dt_compat[] = {
-	"hpe,gxp",
-	NULL,
-};
-
-DT_MACHINE_START(GXP_DT, "HPE GXP")
-	.dt_compat	= gxp_board_dt_compat,
-	.l2c_aux_val = 0,
-	.l2c_aux_mask = ~0,
-MACHINE_END
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index dc47b2312127..6ea1bd55acf8 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -242,7 +242,7 @@ choice
 
 	config VF_USE_PIT_TIMER
 		bool "Use PIT timer"
-		select VF_PIT_TIMER
+		select NXP_PIT_TIMER
 		help
 		  Use SoC Periodic Interrupt Timer (PIT) as clocksource
 
diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c
index 83381e23fab9..afc6404f62d3 100644
--- a/arch/arm/mach-omap1/clock.c
+++ b/arch/arm/mach-omap1/clock.c
@@ -705,14 +705,21 @@ static unsigned long omap1_clk_recalc_rate(struct clk_hw *hw, unsigned long p_ra
 	return clk->rate;
 }
 
-static long omap1_clk_round_rate(struct clk_hw *hw, unsigned long rate, unsigned long *p_rate)
+static int omap1_clk_determine_rate(struct clk_hw *hw,
+				    struct clk_rate_request *req)
 {
 	struct omap1_clk *clk = to_omap1_clk(hw);
 
-	if (clk->round_rate != NULL)
-		return clk->round_rate(clk, rate, p_rate);
+	if (clk->round_rate != NULL) {
+		req->rate = clk->round_rate(clk, req->rate,
+					    &req->best_parent_rate);
 
-	return omap1_clk_recalc_rate(hw, *p_rate);
+		return 0;
+	}
+
+	req->rate = omap1_clk_recalc_rate(hw, req->best_parent_rate);
+
+	return 0;
 }
 
 static int omap1_clk_set_rate(struct clk_hw *hw, unsigned long rate, unsigned long p_rate)
@@ -771,7 +778,7 @@ const struct clk_ops omap1_clk_gate_ops = {
 
 const struct clk_ops omap1_clk_rate_ops = {
 	.recalc_rate	= omap1_clk_recalc_rate,
-	.round_rate	= omap1_clk_round_rate,
+	.determine_rate = omap1_clk_determine_rate,
 	.set_rate	= omap1_clk_set_rate,
 	.init		= omap1_clk_init_op,
 };
@@ -784,7 +791,7 @@ const struct clk_ops omap1_clk_full_ops = {
 	.disable_unused	= omap1_clk_disable_unused,
 #endif
 	.recalc_rate	= omap1_clk_recalc_rate,
-	.round_rate	= omap1_clk_round_rate,
+	.determine_rate = omap1_clk_determine_rate,
 	.set_rate	= omap1_clk_set_rate,
 	.init		= omap1_clk_init_op,
 };
diff --git a/arch/arm/mach-omap2/am33xx-restart.c b/arch/arm/mach-omap2/am33xx-restart.c
index fcf3d557aa78..3cdf223addcc 100644
--- a/arch/arm/mach-omap2/am33xx-restart.c
+++ b/arch/arm/mach-omap2/am33xx-restart.c
@@ -2,12 +2,46 @@
 /*
  * am33xx-restart.c - Code common to all AM33xx machines.
  */
+#include <dt-bindings/pinctrl/am33xx.h>
+#include <linux/delay.h>
 #include <linux/kernel.h>
 #include <linux/reboot.h>
 
 #include "common.h"
+#include "control.h"
 #include "prm.h"
 
+/*
+ * Advisory 1.0.36 EMU0 and EMU1: Terminals Must be Pulled High Before
+ * ICEPick Samples
+ *
+ * If EMU0/EMU1 pins have been used as GPIO outputs and actively driving low
+ * level, the device might not reboot in normal mode. We are in a bad position
+ * to override GPIO state here, so just switch the pins into EMU input mode
+ * (that's what reset will do anyway) and wait a bit, because the state will be
+ * latched 190 ns after reset.
+ */
+static void am33xx_advisory_1_0_36(void)
+{
+	u32 emu0 = omap_ctrl_readl(AM335X_PIN_EMU0);
+	u32 emu1 = omap_ctrl_readl(AM335X_PIN_EMU1);
+
+	/* If both pins are in EMU mode, nothing to do */
+	if (!(emu0 & 7) && !(emu1 & 7))
+		return;
+
+	/* Switch GPIO3_7/GPIO3_8 into EMU0/EMU1 modes respectively */
+	omap_ctrl_writel(emu0 & ~7, AM335X_PIN_EMU0);
+	omap_ctrl_writel(emu1 & ~7, AM335X_PIN_EMU1);
+
+	/*
+	 * Give pull-ups time to load the pin/PCB trace capacity.
+	 * 5 ms shall be enough to load 1 uF (would be huge capacity for these
+	 * pins) with TI-recommended 4k7 external pull-ups.
+	 */
+	mdelay(5);
+}
+
 /**
  * am33xx_restart - trigger a software restart of the SoC
  * @mode: the "reboot mode", see arch/arm/kernel/{setup,process}.c
@@ -18,6 +52,8 @@
  */
 void am33xx_restart(enum reboot_mode mode, const char *cmd)
 {
+	am33xx_advisory_1_0_36();
+
 	/* TODO: Handle cmd if necessary */
 	prm_reboot_mode = mode;
 
diff --git a/arch/arm/mach-omap2/board-n8x0.c b/arch/arm/mach-omap2/board-n8x0.c
index ff2a4a4d8220..969265d5d5c6 100644
--- a/arch/arm/mach-omap2/board-n8x0.c
+++ b/arch/arm/mach-omap2/board-n8x0.c
@@ -167,7 +167,7 @@ static int n8x0_mmc_set_power_menelaus(struct device *dev, int slot,
 
 #ifdef CONFIG_MMC_DEBUG
 	dev_dbg(dev, "Set slot %d power: %s (vdd %d)\n", slot + 1,
-		power_on ? "on" : "off", vdd);
+		str_on_off(power_on), vdd);
 #endif
 	if (slot == 0) {
 		if (!power_on)
diff --git a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
index 011076a5952f..96c5cdc718c8 100644
--- a/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
+++ b/arch/arm/mach-omap2/clkt2xxx_virt_prcm_set.c
@@ -70,8 +70,8 @@ static unsigned long omap2_table_mpu_recalc(struct clk_hw *clk,
  * Some might argue L3-DDR, others ARM, others IVA. This code is simple and
  * just uses the ARM rates.
  */
-static long omap2_round_to_table_rate(struct clk_hw *hw, unsigned long rate,
-			       unsigned long *parent_rate)
+static int omap2_determine_rate_to_table(struct clk_hw *hw,
+					 struct clk_rate_request *req)
 {
 	const struct prcm_config *ptr;
 	long highest_rate;
@@ -87,10 +87,12 @@ static long omap2_round_to_table_rate(struct clk_hw *hw, unsigned long rate,
 		highest_rate = ptr->mpu_speed;
 
 		/* Can check only after xtal frequency check */
-		if (ptr->mpu_speed <= rate)
+		if (ptr->mpu_speed <= req->rate)
 			break;
 	}
-	return highest_rate;
+	req->rate = highest_rate;
+
+	return 0;
 }
 
 /* Sets basic clocks based on the specified rate */
@@ -215,7 +217,7 @@ static void omap2xxx_clkt_vps_late_init(void)
 static const struct clk_ops virt_prcm_set_ops = {
 	.recalc_rate	= &omap2_table_mpu_recalc,
 	.set_rate	= &omap2_select_table_rate,
-	.round_rate	= &omap2_round_to_table_rate,
+	.determine_rate = &omap2_determine_rate_to_table,
 };
 
 /**
diff --git a/arch/arm/mach-omap2/pm33xx-core.c b/arch/arm/mach-omap2/pm33xx-core.c
index c907478be196..4abb86dc98fd 100644
--- a/arch/arm/mach-omap2/pm33xx-core.c
+++ b/arch/arm/mach-omap2/pm33xx-core.c
@@ -388,12 +388,15 @@ static int __init amx3_idle_init(struct device_node *cpu_node, int cpu)
 		if (!state_node)
 			break;
 
-		if (!of_device_is_available(state_node))
+		if (!of_device_is_available(state_node)) {
+			of_node_put(state_node);
 			continue;
+		}
 
 		if (i == CPUIDLE_STATE_MAX) {
 			pr_warn("%s: cpuidle states reached max possible\n",
 				__func__);
+			of_node_put(state_node);
 			break;
 		}
 
@@ -403,6 +406,7 @@ static int __init amx3_idle_init(struct device_node *cpu_node, int cpu)
 			states[state_count].wfi_flags |= WFI_FLAG_WAKE_M3 |
 							 WFI_FLAG_FLUSH_CACHE;
 
+		of_node_put(state_node);
 		state_count++;
 	}
 
diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c
index a4785302b7ae..0225b9889404 100644
--- a/arch/arm/mach-omap2/powerdomain.c
+++ b/arch/arm/mach-omap2/powerdomain.c
@@ -1111,7 +1111,7 @@ int omap_set_pwrdm_state(struct powerdomain *pwrdm, u8 pwrst)
 	int curr_pwrst;
 	int ret = 0;
 
-	if (!pwrdm || IS_ERR(pwrdm))
+	if (IS_ERR_OR_NULL(pwrdm))
 		return -EINVAL;
 
 	while (!(pwrdm->pwrsts & (1 << pwrst))) {
diff --git a/arch/arm/mach-omap2/voltage.c b/arch/arm/mach-omap2/voltage.c
index 49e8bc69abdd..000c2bca5ef0 100644
--- a/arch/arm/mach-omap2/voltage.c
+++ b/arch/arm/mach-omap2/voltage.c
@@ -51,7 +51,7 @@ static LIST_HEAD(voltdm_list);
  */
 unsigned long voltdm_get_voltage(struct voltagedomain *voltdm)
 {
-	if (!voltdm || IS_ERR(voltdm)) {
+	if (IS_ERR_OR_NULL(voltdm)) {
 		pr_warn("%s: VDD specified does not exist!\n", __func__);
 		return 0;
 	}
@@ -73,7 +73,7 @@ static int voltdm_scale(struct voltagedomain *voltdm,
 	int ret, i;
 	unsigned long volt = 0;
 
-	if (!voltdm || IS_ERR(voltdm)) {
+	if (IS_ERR_OR_NULL(voltdm)) {
 		pr_warn("%s: VDD specified does not exist!\n", __func__);
 		return -EINVAL;
 	}
@@ -124,7 +124,7 @@ void voltdm_reset(struct voltagedomain *voltdm)
 {
 	unsigned long target_volt;
 
-	if (!voltdm || IS_ERR(voltdm)) {
+	if (IS_ERR_OR_NULL(voltdm)) {
 		pr_warn("%s: VDD specified does not exist!\n", __func__);
 		return;
 	}
@@ -154,7 +154,7 @@ void voltdm_reset(struct voltagedomain *voltdm)
 void omap_voltage_get_volttable(struct voltagedomain *voltdm,
 				struct omap_volt_data **volt_data)
 {
-	if (!voltdm || IS_ERR(voltdm)) {
+	if (IS_ERR_OR_NULL(voltdm)) {
 		pr_warn("%s: VDD specified does not exist!\n", __func__);
 		return;
 	}
@@ -182,7 +182,7 @@ struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
 {
 	int i;
 
-	if (!voltdm || IS_ERR(voltdm)) {
+	if (IS_ERR_OR_NULL(voltdm)) {
 		pr_warn("%s: VDD specified does not exist!\n", __func__);
 		return ERR_PTR(-EINVAL);
 	}
@@ -216,7 +216,7 @@ struct omap_volt_data *omap_voltage_get_voltdata(struct voltagedomain *voltdm,
 int omap_voltage_register_pmic(struct voltagedomain *voltdm,
 			       struct omap_voltdm_pmic *pmic)
 {
-	if (!voltdm || IS_ERR(voltdm)) {
+	if (IS_ERR_OR_NULL(voltdm)) {
 		pr_warn("%s: VDD specified does not exist!\n", __func__);
 		return -EINVAL;
 	}
diff --git a/arch/arm/mach-omap2/vp.c b/arch/arm/mach-omap2/vp.c
index a709655b978c..03c481c4742c 100644
--- a/arch/arm/mach-omap2/vp.c
+++ b/arch/arm/mach-omap2/vp.c
@@ -199,7 +199,7 @@ void omap_vp_enable(struct voltagedomain *voltdm)
 	struct omap_vp_instance *vp;
 	u32 vpconfig, volt;
 
-	if (!voltdm || IS_ERR(voltdm)) {
+	if (IS_ERR_OR_NULL(voltdm)) {
 		pr_warn("%s: VDD specified does not exist!\n", __func__);
 		return;
 	}
@@ -244,7 +244,7 @@ void omap_vp_disable(struct voltagedomain *voltdm)
 	u32 vpconfig;
 	int timeout;
 
-	if (!voltdm || IS_ERR(voltdm)) {
+	if (IS_ERR_OR_NULL(voltdm)) {
 		pr_warn("%s: VDD specified does not exist!\n", __func__);
 		return;
 	}
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig
index b7855cc665e9..c90193dd3928 100644
--- a/arch/arm/mach-rockchip/Kconfig
+++ b/arch/arm/mach-rockchip/Kconfig
@@ -13,7 +13,7 @@ config ARCH_ROCKCHIP
 	select HAVE_ARM_SCU if SMP
 	select HAVE_ARM_TWD if SMP
 	select DW_APB_TIMER_OF
-	select REGULATOR if PM
+	select REGULATOR
 	select ROCKCHIP_TIMER
 	select ARM_GLOBAL_TIMER
 	select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
diff --git a/arch/arm/mach-shmobile/pm-rcar-gen2.c b/arch/arm/mach-shmobile/pm-rcar-gen2.c
index 907a4f8c5aed..46654d196f8d 100644
--- a/arch/arm/mach-shmobile/pm-rcar-gen2.c
+++ b/arch/arm/mach-shmobile/pm-rcar-gen2.c
@@ -81,7 +81,7 @@ void __init rcar_gen2_pm_init(void)
 
 map:
 	/* RAM for jump stub, because BAR requires 256KB aligned address */
-	if (res.start & (256 * 1024 - 1) ||
+	if (res.start & (SZ_256K - 1) ||
 	    resource_size(&res) < shmobile_boot_size) {
 		pr_err("Invalid smp-sram region\n");
 		return;
diff --git a/arch/arm/mach-sti/Kconfig b/arch/arm/mach-sti/Kconfig
index b3842c971d31..e58699e13e1a 100644
--- a/arch/arm/mach-sti/Kconfig
+++ b/arch/arm/mach-sti/Kconfig
@@ -19,31 +19,13 @@ menuconfig ARCH_STI
 	select PL310_ERRATA_769419 if CACHE_L2X0
 	select RESET_CONTROLLER
 	help
-	  Include support for STMicroelectronics' STiH415/416, STiH407/10 and
+	  Include support for STMicroelectronics' STiH407/10 and
 	  STiH418 family SoCs using the Device Tree for discovery.  More
 	  information can be found in Documentation/arch/arm/sti/ and
 	  Documentation/devicetree.
 
 if ARCH_STI
 
-config SOC_STIH415
-	bool "STiH415 STMicroelectronics Consumer Electronics family"
-	default y
-	help
-	  This enables support for STMicroelectronics Digital Consumer
-	  Electronics family StiH415 parts, primarily targeted at set-top-box
-	  and other digital audio/video applications using Flattned Device
-	  Trees.
-
-config SOC_STIH416
-	bool "STiH416 STMicroelectronics Consumer Electronics family"
-	default y
-	help
-	  This enables support for STMicroelectronics Digital Consumer
-	  Electronics family StiH416 parts, primarily targeted at set-top-box
-	  and other digital audio/video applications using Flattened Device
-	  Trees.
-
 config SOC_STIH407
 	bool "STiH407 STMicroelectronics Consumer Electronics family"
 	default y
diff --git a/arch/arm/mach-sti/board-dt.c b/arch/arm/mach-sti/board-dt.c
index 488084b61b4a..1aaf61184685 100644
--- a/arch/arm/mach-sti/board-dt.c
+++ b/arch/arm/mach-sti/board-dt.c
@@ -10,8 +10,6 @@
 #include "smp.h"
 
 static const char *const stih41x_dt_match[] __initconst = {
-	"st,stih415",
-	"st,stih416",
 	"st,stih407",
 	"st,stih410",
 	"st,stih418",
diff --git a/arch/arm/mach-versatile/spc.c b/arch/arm/mach-versatile/spc.c
index 790092734cf6..812db32448fc 100644
--- a/arch/arm/mach-versatile/spc.c
+++ b/arch/arm/mach-versatile/spc.c
@@ -497,12 +497,13 @@ static unsigned long spc_recalc_rate(struct clk_hw *hw,
 	return freq * 1000;
 }
 
-static long spc_round_rate(struct clk_hw *hw, unsigned long drate,
-		unsigned long *parent_rate)
+static int spc_determine_rate(struct clk_hw *hw, struct clk_rate_request *req)
 {
 	struct clk_spc *spc = to_clk_spc(hw);
 
-	return ve_spc_round_performance(spc->cluster, drate);
+	req->rate = ve_spc_round_performance(spc->cluster, req->rate);
+
+	return 0;
 }
 
 static int spc_set_rate(struct clk_hw *hw, unsigned long rate,
@@ -515,7 +516,7 @@ static int spc_set_rate(struct clk_hw *hw, unsigned long rate,
 
 static struct clk_ops clk_spc_ops = {
 	.recalc_rate = spc_recalc_rate,
-	.round_rate = spc_round_rate,
+	.determine_rate = spc_determine_rate,
 	.set_rate = spc_set_rate,
 };
 
diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig
index 5c1023a6d78c..7b27ee9482b3 100644
--- a/arch/arm/mm/Kconfig
+++ b/arch/arm/mm/Kconfig
@@ -926,9 +926,7 @@ config VDSO
 	default y if ARM_ARCH_TIMER
 	select HAVE_GENERIC_VDSO
 	select GENERIC_TIME_VSYSCALL
-	select GENERIC_VDSO_32
 	select GENERIC_GETTIMEOFDAY
-	select GENERIC_VDSO_DATA_STORE
 	help
 	  Place in the process address space an ELF shared object
 	  providing fast implementations of gettimeofday and
diff --git a/arch/arm/mm/Makefile b/arch/arm/mm/Makefile
index a195cd1d3e6d..1e2201013371 100644
--- a/arch/arm/mm/Makefile
+++ b/arch/arm/mm/Makefile
@@ -89,7 +89,7 @@ obj-$(CONFIG_CPU_V6)		+= proc-v6.o
 obj-$(CONFIG_CPU_V6K)		+= proc-v6.o
 obj-$(CONFIG_CPU_V7)		+= proc-v7.o proc-v7-bugs.o
 obj-$(CONFIG_CPU_V7M)		+= proc-v7m.o
-obj-$(CONFIG_CFI_CLANG)		+= proc.o
+obj-$(CONFIG_CFI)		+= proc.o
 
 obj-$(CONFIG_OUTER_CACHE)	+= l2c-common.o
 obj-$(CONFIG_CACHE_B15_RAC)	+= cache-b15-rac.o
diff --git a/arch/arm/mm/cache-fa.S b/arch/arm/mm/cache-fa.S
index 4a3668b52a2d..e1641799569b 100644
--- a/arch/arm/mm/cache-fa.S
+++ b/arch/arm/mm/cache-fa.S
@@ -112,7 +112,7 @@ SYM_FUNC_END(fa_flush_user_cache_range)
  *	- end	 - virtual end address
  */
 SYM_TYPED_FUNC_START(fa_coherent_kern_range)
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	fa_coherent_user_range
 #endif
 SYM_FUNC_END(fa_coherent_kern_range)
diff --git a/arch/arm/mm/cache-v4.S b/arch/arm/mm/cache-v4.S
index 0e94e5193dbd..001d7042bd46 100644
--- a/arch/arm/mm/cache-v4.S
+++ b/arch/arm/mm/cache-v4.S
@@ -104,7 +104,7 @@ SYM_FUNC_END(v4_coherent_user_range)
  *	- size	- region size
  */
 SYM_TYPED_FUNC_START(v4_flush_kern_dcache_area)
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	v4_dma_flush_range
 #endif
 SYM_FUNC_END(v4_flush_kern_dcache_area)
diff --git a/arch/arm/mm/cache-v4wb.S b/arch/arm/mm/cache-v4wb.S
index ce55a2eef5da..874fe5310f9a 100644
--- a/arch/arm/mm/cache-v4wb.S
+++ b/arch/arm/mm/cache-v4wb.S
@@ -136,7 +136,7 @@ SYM_FUNC_END(v4wb_flush_user_cache_range)
  */
 SYM_TYPED_FUNC_START(v4wb_flush_kern_dcache_area)
 	add	r1, r0, r1
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	v4wb_coherent_user_range
 #endif
 SYM_FUNC_END(v4wb_flush_kern_dcache_area)
@@ -152,7 +152,7 @@ SYM_FUNC_END(v4wb_flush_kern_dcache_area)
  *	- end	 - virtual end address
  */
 SYM_TYPED_FUNC_START(v4wb_coherent_kern_range)
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	v4wb_coherent_user_range
 #endif
 SYM_FUNC_END(v4wb_coherent_kern_range)
diff --git a/arch/arm/mm/cache-v4wt.S b/arch/arm/mm/cache-v4wt.S
index a97dc267b3b0..2ee62e4b2b07 100644
--- a/arch/arm/mm/cache-v4wt.S
+++ b/arch/arm/mm/cache-v4wt.S
@@ -108,7 +108,7 @@ SYM_FUNC_END(v4wt_flush_user_cache_range)
  *	- end	 - virtual end address
  */
 SYM_TYPED_FUNC_START(v4wt_coherent_kern_range)
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	v4wt_coherent_user_range
 #endif
 SYM_FUNC_END(v4wt_coherent_kern_range)
diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S
index 9f415476e218..5ceea8965ea1 100644
--- a/arch/arm/mm/cache-v6.S
+++ b/arch/arm/mm/cache-v6.S
@@ -117,7 +117,7 @@ SYM_FUNC_END(v6_flush_user_cache_range)
  *	- the Icache does not read data from the write buffer
  */
 SYM_TYPED_FUNC_START(v6_coherent_kern_range)
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	v6_coherent_user_range
 #endif
 SYM_FUNC_END(v6_coherent_kern_range)
diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S
index 201ca05436fa..726681fb7d4d 100644
--- a/arch/arm/mm/cache-v7.S
+++ b/arch/arm/mm/cache-v7.S
@@ -261,7 +261,7 @@ SYM_FUNC_END(v7_flush_user_cache_range)
  *	- the Icache does not read data from the write buffer
  */
 SYM_TYPED_FUNC_START(v7_coherent_kern_range)
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	v7_coherent_user_range
 #endif
 SYM_FUNC_END(v7_coherent_kern_range)
diff --git a/arch/arm/mm/cache-v7m.S b/arch/arm/mm/cache-v7m.S
index 14d719eba729..7f9cfad2ea21 100644
--- a/arch/arm/mm/cache-v7m.S
+++ b/arch/arm/mm/cache-v7m.S
@@ -286,7 +286,7 @@ SYM_FUNC_END(v7m_flush_user_cache_range)
  *	- the Icache does not read data from the write buffer
  */
 SYM_TYPED_FUNC_START(v7m_coherent_kern_range)
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	v7m_coherent_user_range
 #endif
 SYM_FUNC_END(v7m_coherent_kern_range)
diff --git a/arch/arm/mm/proc-arm1020.S b/arch/arm/mm/proc-arm1020.S
index d0ce3414a13e..4612a4961e81 100644
--- a/arch/arm/mm/proc-arm1020.S
+++ b/arch/arm/mm/proc-arm1020.S
@@ -203,7 +203,7 @@ SYM_FUNC_END(arm1020_flush_user_cache_range)
  *	- end	- virtual end address
  */
 SYM_TYPED_FUNC_START(arm1020_coherent_kern_range)
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	arm1020_coherent_user_range
 #endif
 SYM_FUNC_END(arm1020_coherent_kern_range)
diff --git a/arch/arm/mm/proc-arm1020e.S b/arch/arm/mm/proc-arm1020e.S
index 64f031bf6eff..b4a8a3a8eda3 100644
--- a/arch/arm/mm/proc-arm1020e.S
+++ b/arch/arm/mm/proc-arm1020e.S
@@ -200,7 +200,7 @@ SYM_FUNC_END(arm1020e_flush_user_cache_range)
  *	- end	- virtual end address
  */
 SYM_TYPED_FUNC_START(arm1020e_coherent_kern_range)
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	arm1020e_coherent_user_range
 #endif
 SYM_FUNC_END(arm1020e_coherent_kern_range)
diff --git a/arch/arm/mm/proc-arm1022.S b/arch/arm/mm/proc-arm1022.S
index 42ed5ed07252..709870e99e19 100644
--- a/arch/arm/mm/proc-arm1022.S
+++ b/arch/arm/mm/proc-arm1022.S
@@ -199,7 +199,7 @@ SYM_FUNC_END(arm1022_flush_user_cache_range)
  *	- end	- virtual end address
  */
 SYM_TYPED_FUNC_START(arm1022_coherent_kern_range)
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	arm1022_coherent_user_range
 #endif
 SYM_FUNC_END(arm1022_coherent_kern_range)
diff --git a/arch/arm/mm/proc-arm1026.S b/arch/arm/mm/proc-arm1026.S
index b3ae62cd553a..02f7370a8c5c 100644
--- a/arch/arm/mm/proc-arm1026.S
+++ b/arch/arm/mm/proc-arm1026.S
@@ -194,7 +194,7 @@ SYM_FUNC_END(arm1026_flush_user_cache_range)
  *	- end	- virtual end address
  */
 SYM_TYPED_FUNC_START(arm1026_coherent_kern_range)
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	arm1026_coherent_user_range
 #endif
 SYM_FUNC_END(arm1026_coherent_kern_range)
diff --git a/arch/arm/mm/proc-arm920.S b/arch/arm/mm/proc-arm920.S
index a30df54ad5fa..4727f4b5b6e8 100644
--- a/arch/arm/mm/proc-arm920.S
+++ b/arch/arm/mm/proc-arm920.S
@@ -180,7 +180,7 @@ SYM_FUNC_END(arm920_flush_user_cache_range)
  *	- end	- virtual end address
  */
 SYM_TYPED_FUNC_START(arm920_coherent_kern_range)
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	arm920_coherent_user_range
 #endif
 SYM_FUNC_END(arm920_coherent_kern_range)
diff --git a/arch/arm/mm/proc-arm922.S b/arch/arm/mm/proc-arm922.S
index aac4e048100d..5a4a3f4f2683 100644
--- a/arch/arm/mm/proc-arm922.S
+++ b/arch/arm/mm/proc-arm922.S
@@ -182,7 +182,7 @@ SYM_FUNC_END(arm922_flush_user_cache_range)
  *	- end	- virtual end address
  */
 SYM_TYPED_FUNC_START(arm922_coherent_kern_range)
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	arm922_coherent_user_range
 #endif
 SYM_FUNC_END(arm922_coherent_kern_range)
diff --git a/arch/arm/mm/proc-arm925.S b/arch/arm/mm/proc-arm925.S
index 035941faeb2e..1c4830afe1d3 100644
--- a/arch/arm/mm/proc-arm925.S
+++ b/arch/arm/mm/proc-arm925.S
@@ -229,7 +229,7 @@ SYM_FUNC_END(arm925_flush_user_cache_range)
  *	- end	- virtual end address
  */
 SYM_TYPED_FUNC_START(arm925_coherent_kern_range)
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	arm925_coherent_user_range
 #endif
 SYM_FUNC_END(arm925_coherent_kern_range)
diff --git a/arch/arm/mm/proc-arm926.S b/arch/arm/mm/proc-arm926.S
index 6f43d6af2d9a..a09cc3e02efd 100644
--- a/arch/arm/mm/proc-arm926.S
+++ b/arch/arm/mm/proc-arm926.S
@@ -192,7 +192,7 @@ SYM_FUNC_END(arm926_flush_user_cache_range)
  *	- end	- virtual end address
  */
 SYM_TYPED_FUNC_START(arm926_coherent_kern_range)
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	arm926_coherent_user_range
 #endif
 SYM_FUNC_END(arm926_coherent_kern_range)
diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S
index 0d30bb25c42b..545c076c36d2 100644
--- a/arch/arm/mm/proc-arm940.S
+++ b/arch/arm/mm/proc-arm940.S
@@ -153,7 +153,7 @@ SYM_FUNC_END(arm940_coherent_kern_range)
  *	- end	- virtual end address
  */
 SYM_TYPED_FUNC_START(arm940_coherent_user_range)
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	arm940_flush_kern_dcache_area
 #endif
 SYM_FUNC_END(arm940_coherent_user_range)
diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S
index 27750ace2ced..f3d4e18c3fba 100644
--- a/arch/arm/mm/proc-arm946.S
+++ b/arch/arm/mm/proc-arm946.S
@@ -173,7 +173,7 @@ SYM_FUNC_END(arm946_flush_user_cache_range)
  *	- end	- virtual end address
  */
 SYM_TYPED_FUNC_START(arm946_coherent_kern_range)
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	arm946_coherent_user_range
 #endif
 SYM_FUNC_END(arm946_coherent_kern_range)
diff --git a/arch/arm/mm/proc-feroceon.S b/arch/arm/mm/proc-feroceon.S
index f67b2ffac854..7f08d06c9625 100644
--- a/arch/arm/mm/proc-feroceon.S
+++ b/arch/arm/mm/proc-feroceon.S
@@ -208,7 +208,7 @@ SYM_FUNC_END(feroceon_flush_user_cache_range)
  */
 	.align	5
 SYM_TYPED_FUNC_START(feroceon_coherent_kern_range)
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	feroceon_coherent_user_range
 #endif
 SYM_FUNC_END(feroceon_coherent_kern_range)
diff --git a/arch/arm/mm/proc-mohawk.S b/arch/arm/mm/proc-mohawk.S
index 8e9f38da863a..4669c63e3121 100644
--- a/arch/arm/mm/proc-mohawk.S
+++ b/arch/arm/mm/proc-mohawk.S
@@ -163,7 +163,7 @@ SYM_FUNC_END(mohawk_flush_user_cache_range)
  *	- end	- virtual end address
  */
 SYM_TYPED_FUNC_START(mohawk_coherent_kern_range)
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	mohawk_coherent_user_range
 #endif
 SYM_FUNC_END(mohawk_coherent_kern_range)
diff --git a/arch/arm/mm/proc-xsc3.S b/arch/arm/mm/proc-xsc3.S
index 14927b380452..fd25634a2ed5 100644
--- a/arch/arm/mm/proc-xsc3.S
+++ b/arch/arm/mm/proc-xsc3.S
@@ -223,7 +223,7 @@ SYM_FUNC_END(xsc3_flush_user_cache_range)
  *	it also trashes the mini I-cache used by JTAG debuggers.
  */
 SYM_TYPED_FUNC_START(xsc3_coherent_kern_range)
-#ifdef CONFIG_CFI_CLANG /* Fallthrough if !CFI */
+#ifdef CONFIG_CFI /* Fallthrough if !CFI */
 	b	xsc3_coherent_user_range
 #endif
 SYM_FUNC_END(xsc3_coherent_kern_range)
diff --git a/arch/arm/mm/tlb-v4.S b/arch/arm/mm/tlb-v4.S
index 09ff69008d94..079774a02be6 100644
--- a/arch/arm/mm/tlb-v4.S
+++ b/arch/arm/mm/tlb-v4.S
@@ -52,7 +52,7 @@ SYM_FUNC_END(v4_flush_user_tlb_range)
  *	- start - virtual address (may not be aligned)
  *	- end   - virtual address (may not be aligned)
  */
-#ifdef CONFIG_CFI_CLANG
+#ifdef CONFIG_CFI
 SYM_TYPED_FUNC_START(v4_flush_kern_tlb_range)
 	b	.v4_flush_kern_tlb_range
 SYM_FUNC_END(v4_flush_kern_tlb_range)
diff --git a/arch/arm/probes/uprobes/core.c b/arch/arm/probes/uprobes/core.c
index 885e0c5e8c20..3d96fb41d624 100644
--- a/arch/arm/probes/uprobes/core.c
+++ b/arch/arm/probes/uprobes/core.c
@@ -30,7 +30,7 @@ int set_swbp(struct arch_uprobe *auprobe, struct vm_area_struct *vma,
 	     unsigned long vaddr)
 {
 	return uprobe_write_opcode(auprobe, vma, vaddr,
-		   __opcode_to_mem_arm(auprobe->bpinsn));
+		   __opcode_to_mem_arm(auprobe->bpinsn), true);
 }
 
 bool arch_uprobe_ignore(struct arch_uprobe *auprobe, struct pt_regs *regs)
diff --git a/arch/arm64/Kconfig b/arch/arm64/Kconfig
index e9bbfacc35a6..ab4160d33340 100644
--- a/arch/arm64/Kconfig
+++ b/arch/arm64/Kconfig
@@ -100,7 +100,7 @@ config ARM64
 	select ARCH_SUPPORTS_SHADOW_CALL_STACK if CC_HAVE_SHADOW_CALL_STACK
 	select ARCH_SUPPORTS_LTO_CLANG if CPU_LITTLE_ENDIAN
 	select ARCH_SUPPORTS_LTO_CLANG_THIN
-	select ARCH_SUPPORTS_CFI_CLANG
+	select ARCH_SUPPORTS_CFI
 	select ARCH_SUPPORTS_ATOMIC_RMW
 	select ARCH_SUPPORTS_INT128 if CC_HAS_INT128
 	select ARCH_SUPPORTS_NUMA_BALANCING
@@ -108,6 +108,9 @@ config ARM64
 	select ARCH_SUPPORTS_PER_VMA_LOCK
 	select ARCH_SUPPORTS_HUGE_PFNMAP if TRANSPARENT_HUGEPAGE
 	select ARCH_SUPPORTS_RT
+	select ARCH_SUPPORTS_SCHED_SMT
+	select ARCH_SUPPORTS_SCHED_CLUSTER
+	select ARCH_SUPPORTS_SCHED_MC
 	select ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH
 	select ARCH_WANT_COMPAT_IPC_PARSE_VERSION if COMPAT
 	select ARCH_WANT_DEFAULT_BPF_JIT
@@ -151,6 +154,7 @@ config ARM64
 	select GENERIC_EARLY_IOREMAP
 	select GENERIC_IDLE_POLL_SETUP
 	select GENERIC_IOREMAP
+	select GENERIC_IRQ_ENTRY
 	select GENERIC_IRQ_IPI
 	select GENERIC_IRQ_KEXEC_CLEAR_VM_FORWARD
 	select GENERIC_IRQ_PROBE
@@ -162,8 +166,6 @@ config ARM64
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_TIME_VSYSCALL
 	select GENERIC_GETTIMEOFDAY
-	select GENERIC_VDSO_DATA_STORE
-	select GENERIC_VDSO_TIME_NS
 	select HARDIRQS_SW_RESEND
 	select HAS_IOPORT
 	select HAVE_MOVE_PMD
@@ -212,7 +214,7 @@ config ARM64
 	select HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS \
 		if DYNAMIC_FTRACE_WITH_ARGS && DYNAMIC_FTRACE_WITH_CALL_OPS
 	select HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS \
-		if (DYNAMIC_FTRACE_WITH_ARGS && !CFI_CLANG && \
+		if (DYNAMIC_FTRACE_WITH_ARGS && !CFI && \
 		    (CC_IS_CLANG || !CC_OPTIMIZE_FOR_SIZE))
 	select FTRACE_MCOUNT_USE_PATCHABLE_FUNCTION_ENTRY \
 		if DYNAMIC_FTRACE_WITH_ARGS
@@ -1138,6 +1140,7 @@ config ARM64_ERRATUM_3194386
 	  * ARM Neoverse-V1 erratum 3324341
 	  * ARM Neoverse V2 erratum 3324336
 	  * ARM Neoverse-V3 erratum 3312417
+	  * ARM Neoverse-V3AE erratum 3312417
 
 	  On affected cores "MSR SSBS, #0" instructions may not affect
 	  subsequent speculative instructions, which may permit unexepected
@@ -1492,8 +1495,7 @@ choice
 
 config CPU_BIG_ENDIAN
 	bool "Build big-endian kernel"
-	# https://github.com/llvm/llvm-project/commit/1379b150991f70a5782e9a143c2ba5308da1161c
-	depends on AS_IS_GNU || AS_VERSION >= 150000
+	depends on BROKEN
 	help
 	  Say Y if you plan on running a kernel with a big-endian userspace.
 
@@ -1505,29 +1507,6 @@ config CPU_LITTLE_ENDIAN
 
 endchoice
 
-config SCHED_MC
-	bool "Multi-core scheduler support"
-	help
-	  Multi-core scheduler support improves the CPU scheduler's decision
-	  making when dealing with multi-core CPU chips at a cost of slightly
-	  increased overhead in some places. If unsure say N here.
-
-config SCHED_CLUSTER
-	bool "Cluster scheduler support"
-	help
-	  Cluster scheduler support improves the CPU scheduler's decision
-	  making when dealing with machines that have clusters of CPUs.
-	  Cluster usually means a couple of CPUs which are placed closely
-	  by sharing mid-level caches, last-level cache tags or internal
-	  busses.
-
-config SCHED_SMT
-	bool "SMT scheduler support"
-	help
-	  Improves the CPU scheduler's decision making when dealing with
-	  MultiThreading at a cost of slightly increased overhead in some
-	  places. If unsure say N here.
-
 config NR_CPUS
 	int "Maximum number of CPUs (2-4096)"
 	range 2 4096
@@ -1698,20 +1677,6 @@ config MITIGATE_SPECTRE_BRANCH_HISTORY
 	  When taking an exception from user-space, a sequence of branches
 	  or a firmware call overwrites the branch history.
 
-config RODATA_FULL_DEFAULT_ENABLED
-	bool "Apply r/o permissions of VM areas also to their linear aliases"
-	default y
-	help
-	  Apply read-only attributes of VM areas to the linear alias of
-	  the backing pages as well. This prevents code or read-only data
-	  from being modified (inadvertently or intentionally) via another
-	  mapping of the same memory page. This additional enhancement can
-	  be turned off at runtime by passing rodata=[off|on] (and turned on
-	  with rodata=full if this option is set to 'n')
-
-	  This requires the linear region to be mapped down to pages,
-	  which may adversely affect performance in some cases.
-
 config ARM64_SW_TTBR0_PAN
 	bool "Emulate Privileged Access Never using TTBR0_EL1 switching"
 	depends on !KCSAN
@@ -1782,7 +1747,6 @@ config COMPAT_VDSO
 	bool "Enable vDSO for 32-bit applications"
 	depends on !CPU_BIG_ENDIAN
 	depends on (CC_IS_CLANG && LD_IS_LLD) || "$(CROSS_COMPILE_COMPAT)" != ""
-	select GENERIC_COMPAT_VDSO
 	default y
 	help
 	  Place in the process address space of 32-bit applications an
@@ -2218,14 +2182,13 @@ config ARM64_HAFT
 
 endmenu # "ARMv8.9 architectural features"
 
-menu "v9.4 architectural features"
+menu "ARMv9.4 architectural features"
 
 config ARM64_GCS
 	bool "Enable support for Guarded Control Stack (GCS)"
 	default y
 	select ARCH_HAS_USER_SHADOW_STACK
 	select ARCH_USES_HIGH_VMA_FLAGS
-	depends on !UPROBES
 	help
 	  Guarded Control Stack (GCS) provides support for a separate
 	  stack with restricted access which contains only return
@@ -2237,7 +2200,7 @@ config ARM64_GCS
 	  The feature is detected at runtime, and will remain disabled
 	  if the system does not implement the feature.
 
-endmenu # "v9.4 architectural features"
+endmenu # "ARMv9.4 architectural features"
 
 config ARM64_SVE
 	bool "ARM Scalable Vector Extension support"
@@ -2363,8 +2326,7 @@ config STACKPROTECTOR_PER_TASK
 
 config UNWIND_PATCH_PAC_INTO_SCS
 	bool "Enable shadow call stack dynamically using code patching"
-	# needs Clang with https://github.com/llvm/llvm-project/commit/de07cde67b5d205d58690be012106022aea6d2b3 incorporated
-	depends on CC_IS_CLANG && CLANG_VERSION >= 150000
+	depends on CC_IS_CLANG
 	depends on ARM64_PTR_AUTH_KERNEL && CC_HAS_BRANCH_PROT_PAC_RET
 	depends on SHADOW_CALL_STACK
 	select UNWIND_TABLES
diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms
index a88f5ad9328c..13173795c43d 100644
--- a/arch/arm64/Kconfig.platforms
+++ b/arch/arm64/Kconfig.platforms
@@ -40,6 +40,13 @@ config ARCH_APPLE
 	  This enables support for Apple's in-house ARM SoC family, such
 	  as the Apple M1.
 
+config ARCH_ARTPEC
+	bool "Axis Communications ARTPEC SoC Family"
+	depends on ARCH_EXYNOS
+	select ARM_GIC
+	help
+	   This enables support for the ARMv8 based ARTPEC SoC Family.
+
 config ARCH_AXIADO
 	bool "Axiado SoC Family"
 	select GPIOLIB
@@ -131,20 +138,6 @@ config ARCH_EXYNOS
 	help
 	  This enables support for ARMv8 based Samsung Exynos SoC family.
 
-config ARCH_SPARX5
-	bool "Microchip Sparx5 SoC family"
-	select PINCTRL
-	select DW_APB_TIMER_OF
-	help
-	  This enables support for the Microchip Sparx5 ARMv8-based
-	  SoC family of TSN-capable gigabit switches.
-
-	  The SparX-5 Ethernet switch family provides a rich set of
-	  switching features such as advanced TCAM-based VLAN and QoS
-	  processing enabling delivery of differentiated services, and
-	  security through TCAM-based frame processing using versatile
-	  content aware processor (VCAP).
-
 config ARCH_K3
 	bool "Texas Instruments Inc. K3 multicore SoC architecture"
 	select SOC_TI
@@ -186,6 +179,43 @@ config ARCH_MESON
 	  This enables support for the arm64 based Amlogic SoCs
 	  such as the s905, S905X/D, S912, A113X/D or S905X/D2
 
+menu "Microchip SoC support"
+
+config ARCH_MICROCHIP
+	bool
+
+config ARCH_LAN969X
+	bool "Microchip LAN969X SoC family"
+	select PINCTRL
+	select DW_APB_TIMER_OF
+	select ARCH_MICROCHIP
+	help
+	  This enables support for the Microchip LAN969X ARMv8-based
+	  SoC family of TSN-capable gigabit switches.
+
+	  The LAN969X Ethernet switch family provides a rich set of
+	  switching features such as advanced TCAM-based VLAN and QoS
+	  processing enabling delivery of differentiated services, and
+	  security through TCAM-based frame processing using versatile
+	  content aware processor (VCAP).
+
+config ARCH_SPARX5
+	bool "Microchip Sparx5 SoC family"
+	select PINCTRL
+	select DW_APB_TIMER_OF
+	select ARCH_MICROCHIP
+	help
+	  This enables support for the Microchip Sparx5 ARMv8-based
+	  SoC family of TSN-capable gigabit switches.
+
+	  The SparX-5 Ethernet switch family provides a rich set of
+	  switching features such as advanced TCAM-based VLAN and QoS
+	  processing enabling delivery of differentiated services, and
+	  security through TCAM-based frame processing using versatile
+	  content aware processor (VCAP).
+
+endmenu
+
 config ARCH_MMP
 	bool "Marvell MMP SoC Family"
 	select PINCTRL
diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile
index 780aeba0f3a4..2edfa7bf4ab3 100644
--- a/arch/arm64/boot/dts/allwinner/Makefile
+++ b/arch/arm64/boot/dts/allwinner/Makefile
@@ -41,6 +41,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-pine-h64-model-b.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h6-tanix-tx6-mini.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h313-tanix-tx1.dtb
+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h313-x96q.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-cb1-manta.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-bigtreetech-pi.dtb
 dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h616-orangepi-zero2.dtb
diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h313-x96q.dts b/arch/arm64/boot/dts/allwinner/sun50i-h313-x96q.dts
new file mode 100644
index 000000000000..b2275eb3d55b
--- /dev/null
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h313-x96q.dts
@@ -0,0 +1,230 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (C) 2025 J. Neuschäfer <j.ne@posteo.net>
+ */
+
+/dts-v1/;
+
+#include "sun50i-h616.dtsi"
+#include "sun50i-h616-cpu-opp.dtsi"
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/input/linux-event-codes.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "X96Q";
+	compatible = "amediatech,x96q", "allwinner,sun50i-h616";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_vcc5v: vcc5v {
+		/* board wide 5V supply directly from the DC input */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc-5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			gpios = <&pio 7 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&pio 7 6 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+};
+
+&codec {
+	allwinner,audio-routing = "Line Out", "LINEOUT";
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&reg_dcdca>;
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci3 {
+	status = "okay";
+};
+
+/* TODO: EMAC1 connected to AC200 PHY */
+
+&gpu {
+	mali-supply = <&reg_dcdcc>;
+	status = "okay";
+};
+
+&ir {
+	status = "okay";
+};
+
+&mmc0 {
+	/* microSD */
+	vmmc-supply = <&reg_aldo1>;
+	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;	/* PF6 */
+	disable-wp;
+	bus-width = <4>;
+	status = "okay";
+};
+
+/* TODO: XRadio XR819 WLAN @ mmc1 */
+
+&mmc2 {
+	/* eMMC */
+	vmmc-supply = <&reg_aldo1>;
+	vqmmc-supply = <&reg_bldo1>;
+	non-removable;
+	cap-mmc-hw-reset;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	max-frequency = <100000000>; /* required for stable operation */
+	bus-width = <8>;
+	status = "okay";
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci3 {
+	status = "okay";
+};
+
+&r_i2c {
+	status = "okay";
+
+	axp305: pmic@36 {
+		compatible = "x-powers,axp305", "x-powers,axp805",
+			     "x-powers,axp806";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x36>;
+
+		x-powers,self-working-mode;
+		vina-supply = <&reg_vcc5v>;
+		vinb-supply = <&reg_vcc5v>;
+		vinc-supply = <&reg_vcc5v>;
+		vind-supply = <&reg_vcc5v>;
+		vine-supply = <&reg_vcc5v>;
+		aldoin-supply = <&reg_vcc5v>;
+		bldoin-supply = <&reg_vcc5v>;
+		cldoin-supply = <&reg_vcc5v>;
+
+		regulators {
+			reg_dcdca: dcdca {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-name = "vdd-cpu";
+			};
+
+			dcdcb {
+				/* unused */
+			};
+
+			reg_dcdcc: dcdcc {
+				regulator-always-on;
+				regulator-min-microvolt = <810000>;
+				regulator-max-microvolt = <990000>;
+				regulator-name = "vdd-gpu-sys";
+			};
+
+			dcdcd {
+				regulator-always-on;
+				regulator-min-microvolt = <1500000>;
+				regulator-max-microvolt = <1500000>;
+				regulator-name = "vdd-dram";
+			};
+
+			dcdce {
+				/* unused */
+			};
+
+			reg_aldo1: aldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc3v3";
+			};
+
+			aldo2 {
+				/* unused */
+			};
+
+			aldo3 {
+				/* unused */
+			};
+
+			reg_bldo1: bldo1 {
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-name = "vcc1v8";
+			};
+
+			bldo2 {
+				/* unused */
+			};
+
+			bldo3 {
+				/* unused */
+			};
+
+			bldo4 {
+				/* unused */
+			};
+
+			cldo1 {
+				/* unused */
+			};
+
+			cldo2 {
+				/* unused */
+			};
+
+			cldo3 {
+				/* unused */
+			};
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_ph_pins>;
+	status = "okay";
+};
+
+&usbotg {
+	dr_mode = "host";	/* USB A type receptacle */
+	status = "okay";
+};
+
+&usbphy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
index 6b6f2296bdff..7b36c47a3a13 100644
--- a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
+++ b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
@@ -4,8 +4,10 @@
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/sun6i-rtc.h>
 #include <dt-bindings/clock/sun55i-a523-ccu.h>
+#include <dt-bindings/clock/sun55i-a523-mcu-ccu.h>
 #include <dt-bindings/clock/sun55i-a523-r-ccu.h>
 #include <dt-bindings/reset/sun55i-a523-ccu.h>
+#include <dt-bindings/reset/sun55i-a523-mcu-ccu.h>
 #include <dt-bindings/reset/sun55i-a523-r-ccu.h>
 #include <dt-bindings/power/allwinner,sun55i-a523-ppu.h>
 #include <dt-bindings/power/allwinner,sun55i-a523-pck-600.h>
@@ -624,6 +626,8 @@
 				      "pll-audio";
 			#clock-cells = <1>;
 			#reset-cells = <1>;
+			assigned-clocks = <&r_ccu CLK_R_AHB>, <&r_ccu CLK_R_APB0>;
+			assigned-clock-rates = <200000000>, <100000000>;
 		};
 
 		nmi_intc: interrupt-controller@7010320 {
@@ -690,5 +694,42 @@
 			clock-names = "bus", "hosc", "ahb";
 			#clock-cells = <1>;
 		};
+
+		mcu_ccu: clock-controller@7102000 {
+			compatible = "allwinner,sun55i-a523-mcu-ccu";
+			reg = <0x7102000 0x200>;
+			clocks = <&osc24M>,
+				 <&rtc CLK_OSC32K>,
+				 <&rtc CLK_IOSC>,
+				 <&ccu CLK_PLL_AUDIO0_4X>,
+				 <&ccu CLK_PLL_PERIPH0_300M>,
+				 <&ccu CLK_DSP>,
+				 <&ccu CLK_MBUS>,
+				 <&r_ccu CLK_R_AHB>,
+				 <&r_ccu CLK_R_APB0>;
+			clock-names = "hosc",
+				      "losc",
+				      "iosc",
+				      "pll-audio0-4x",
+				      "pll-periph0-300m",
+				      "dsp",
+				      "mbus",
+				      "r-ahb",
+				      "r-apb0";
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+		};
+
+		npu: npu@7122000 {
+			compatible = "vivante,gc";
+			reg = <0x07122000 0x1000>;
+			interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mcu_ccu CLK_BUS_MCU_NPU_ACLK>,
+				 <&ccu CLK_NPU>,
+				 <&mcu_ccu CLK_BUS_MCU_NPU_HCLK>;
+			clock-names = "bus", "core", "reg";
+			resets = <&mcu_ccu RST_BUS_MCU_NPU>;
+			power-domains = <&ppu PD_NPU>;
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts b/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts
index 553ad774ed13..f82a8d121697 100644
--- a/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts
+++ b/arch/arm64/boot/dts/allwinner/sun55i-a527-cubie-a5e.dts
@@ -6,6 +6,7 @@
 #include "sun55i-a523.dtsi"
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
 
 / {
 	model = "Radxa Cubie A5E";
@@ -20,11 +21,28 @@
 		stdout-path = "serial0:115200n8";
 	};
 
-	ext_osc32k: ext-osc32k-clk {
-		#clock-cells = <0>;
-		compatible = "fixed-clock";
-		clock-frequency = <32768>;
-		clock-output-names = "ext_osc32k";
+	leds {
+		compatible = "gpio-leds";
+
+		power-led {
+			function = LED_FUNCTION_POWER;
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&r_pio 0 4 GPIO_ACTIVE_LOW>; /* PL4 */
+			default-state = "on";
+			linux,default-trigger = "heartbeat";
+		};
+
+		use-led {
+			function = LED_FUNCTION_ACTIVITY;
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&r_pio 0 5 GPIO_ACTIVE_LOW>; /* PL5 */
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&axp717_adc 3>, /* vsys_v */
+			      <&axp717_adc 4>; /* pmic_temp */
 	};
 
 	reg_vcc5v: vcc5v {
@@ -75,6 +93,9 @@
 	ext_rgmii_phy: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
+		reset-gpios = <&pio 7 8 GPIO_ACTIVE_LOW>; /* PH8 */
+		reset-assert-us = <10000>;
+		reset-deassert-us = <150000>;
 	};
 };
 
@@ -125,6 +146,17 @@
 		bldoin-supply = <&reg_vcc5v>;
 		cldoin-supply = <&reg_vcc5v>;
 
+		axp717_adc: adc {
+			compatible = "x-powers,axp717-adc";
+			#io-channel-cells = <1>;
+		};
+
+		battery-power {
+			compatible = "x-powers,axp717-battery-power-supply";
+			/* charger mode design but has no battery terminal */
+			status = "disabled";
+		};
+
 		regulators {
 			/* Supplies the "little" cluster (1.4 GHz cores) */
 			reg_dcdc1: dcdc1 {
@@ -228,6 +260,10 @@
 				regulator-name = "vdd-cpus";
 			};
 		};
+
+		usb-power {
+			compatible = "x-powers,axp717-usb-power-supply";
+		};
 	};
 
 	axp323: pmic@36 {
diff --git a/arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts b/arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts
index b9eeb6753e9e..1b054fa8ef74 100644
--- a/arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts
+++ b/arch/arm64/boot/dts/allwinner/sun55i-t527-avaota-a1.dts
@@ -27,6 +27,12 @@
 		clock-output-names = "ext_osc32k";
 	};
 
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&axp717_adc 3>, /* vsys_v */
+			      <&axp717_adc 4>; /* pmic_temp */
+	};
+
 	reg_vcc12v: vcc12v {
 		/* DC input jack */
 		compatible = "regulator-fixed";
@@ -85,6 +91,9 @@
 	ext_rgmii_phy: ethernet-phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
+		reset-gpios = <&pio 7 8 GPIO_ACTIVE_LOW>; /* PH8 */
+		reset-assert-us = <10000>;
+		reset-deassert-us = <150000>;
 	};
 };
 
@@ -146,6 +155,17 @@
 		bldoin-supply = <&reg_vcc5v>;
 		cldoin-supply = <&reg_vcc5v>;
 
+		axp717_adc: adc {
+			compatible = "x-powers,axp717-adc";
+			#io-channel-cells = <1>;
+		};
+
+		battery-power {
+			compatible = "x-powers,axp717-battery-power-supply";
+			/* no battery; output used for dcdc4 instead */
+			status = "disabled";
+		};
+
 		regulators {
 			/* Supplies the "little" cluster (1.4 GHz cores) */
 			reg_dcdc1: dcdc1 {
@@ -252,6 +272,12 @@
 				regulator-name = "vdd-cpus";
 			};
 		};
+
+		usb-power {
+			compatible = "x-powers,axp717-usb-power-supply";
+			/* 12V-5V buck converter can supply up to 5A */
+			input-current-limit-microamp = <3250000>;
+		};
 	};
 
 	axp323: pmic@36 {
@@ -306,6 +332,14 @@
 	vcc-pm-supply = <&reg_aldo3>;
 };
 
+&rtc {
+	clocks = <&r_ccu CLK_BUS_R_RTC>, <&osc24M>,
+		 <&r_ccu CLK_R_AHB>, <&ext_osc32k>;
+	clock-names = "bus", "hosc", "ahb", "ext-osc32k";
+	assigned-clocks = <&rtc CLK_OSC32K>;
+	assigned-clock-rates = <32768>;
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pb_pins>;
diff --git a/arch/arm64/boot/dts/allwinner/sun55i-t527-orangepi-4a.dts b/arch/arm64/boot/dts/allwinner/sun55i-t527-orangepi-4a.dts
index d07bb9193b43..39a4e194712a 100644
--- a/arch/arm64/boot/dts/allwinner/sun55i-t527-orangepi-4a.dts
+++ b/arch/arm64/boot/dts/allwinner/sun55i-t527-orangepi-4a.dts
@@ -40,6 +40,13 @@
 		};
 	};
 
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&axp717_adc 3>, /* vsys_v */
+			      <&axp717_adc 4>, /* pmic_temp */
+			      <&axp717_adc 7>; /* bkup_batt_v */
+	};
+
 	wifi_pwrseq: pwrseq {
 		compatible = "mmc-pwrseq-simple";
 		reset-gpios = <&r_pio 1 1 GPIO_ACTIVE_LOW>; /* PM1 */
@@ -174,6 +181,17 @@
 		bldoin-supply = <&reg_vcc5v>;
 		cldoin-supply = <&reg_vcc5v>;
 
+		axp717_adc: adc {
+			compatible = "x-powers,axp717-adc";
+			#io-channel-cells = <1>;
+		};
+
+		battery-power {
+			compatible = "x-powers,axp717-battery-power-supply";
+			/* no battery; output used for dcdc4 instead */
+			status = "disabled";
+		};
+
 		regulators {
 			/* Supplies the "little" cluster (1.4 GHz cores) */
 			reg_dcdc1: dcdc1 {
@@ -288,6 +306,11 @@
 				regulator-name = "vdd-cpus-usb-0v9";
 			};
 		};
+
+		usb-power {
+			compatible = "x-powers,axp717-usb-power-supply";
+			input-current-limit-microamp = <3000000>;
+		};
 	};
 
 	axp323: pmic@36 {
@@ -346,6 +369,14 @@
 	vcc-pm-supply = <&reg_bldo2>;
 };
 
+&rtc {
+	clocks = <&r_ccu CLK_BUS_R_RTC>, <&osc24M>,
+		 <&r_ccu CLK_R_AHB>, <&ext_osc32k>;
+	clock-names = "bus", "hosc", "ahb", "ext-osc32k";
+	assigned-clocks = <&rtc CLK_OSC32K>;
+	assigned-clock-rates = <32768>;
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pb_pins>;
diff --git a/arch/arm64/boot/dts/amazon/alpine-v2.dtsi b/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
index 5a72f0b64247..f49209fddbbb 100644
--- a/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
+++ b/arch/arm64/boot/dts/amazon/alpine-v2.dtsi
@@ -123,6 +123,7 @@
 			      <0x0 0xf0120000 0x0 0x2000>;	/* GICH */
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 		};
 
diff --git a/arch/arm64/boot/dts/amazon/alpine-v3.dtsi b/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
index dea60d136c2e..bd35e0e9d0ab 100644
--- a/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
+++ b/arch/arm64/boot/dts/amazon/alpine-v3.dtsi
@@ -320,6 +320,7 @@
 
 		gic: interrupt-controller@f0800000 {
 			compatible = "arm,gic-v3";
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			reg = <0x0 0xf0800000 0 0x10000>,	/* GICD */
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
index 563bc2e662fa..fce45933fa28 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-a4.dtsi
@@ -17,6 +17,13 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
 		};
 
 		cpu1: cpu@1 {
@@ -24,6 +31,13 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
 		};
 
 		cpu2: cpu@2 {
@@ -31,6 +45,13 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
 		};
 
 		cpu3: cpu@3 {
@@ -38,6 +59,22 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x80000>; /* L2. 512 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
index cb9ea3ca6ee0..07aaaf71ea9a 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-c3.dtsi
@@ -23,6 +23,13 @@
 			compatible = "arm,cortex-a35";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
 		};
 
 		cpu1: cpu@1 {
@@ -30,6 +37,22 @@
 			compatible = "arm,cortex-a35";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
+		};
+
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x7d000>; /* L2. 512 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 
@@ -53,6 +76,13 @@
 		#clock-cells = <0>;
 	};
 
+	xtal_32k: xtal-clk-32k {
+		compatible = "fixed-clock";
+		clock-frequency = <32768>;
+		clock-output-names = "xtal_32k";
+		#clock-cells = <0>;
+	};
+
 	sm: secure-monitor {
 		compatible = "amlogic,meson-gxbb-sm";
 
@@ -792,7 +822,7 @@
 			pwm_mn: pwm@54000 {
 				compatible = "amlogic,c3-pwm",
 					     "amlogic,meson-s4-pwm";
-				reg = <0x0 54000 0x0 0x24>;
+				reg = <0x0 0x54000 0x0 0x24>;
 				clocks = <&clkc_periphs CLKID_PWM_M>,
 					 <&clkc_periphs CLKID_PWM_N>;
 				#pwm-cells = <3>;
@@ -967,6 +997,15 @@
 				clock-names = "core", "device";
 				status = "disabled";
 			};
+
+			rtc@9a000 {
+				compatible = "amlogic,c3-rtc",
+					     "amlogic,a5-rtc";
+				reg = <0x0 0x9a000 0x0 0x38>;
+				interrupts = <GIC_SPI 131 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&xtal_32k>, <&clkc_periphs CLKID_SYS_RTC>;
+				clock-names = "osc", "sys";
+			};
 		};
 
 		ethmac: ethernet@fdc00000 {
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi
index 260918b37b9a..d262c0b66e4b 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-s7.dtsi
@@ -18,6 +18,13 @@
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
 		};
 
 		cpu1: cpu@100 {
@@ -25,6 +32,13 @@
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
 		};
 
 		cpu2: cpu@200 {
@@ -32,6 +46,13 @@
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x200>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
 		};
 
 		cpu3: cpu@300 {
@@ -39,8 +60,23 @@
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x300>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2>;
 		};
 
+		l2: l2-cache0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x40000>; /* L2. 256 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
+		};
 	};
 
 	timer {
diff --git a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
index ec743cad57db..6510068bcff9 100644
--- a/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
+++ b/arch/arm64/boot/dts/amlogic/amlogic-t7.dtsi
@@ -53,6 +53,13 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x100>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2_cache_l>;
 		};
 
 		cpu101: cpu@101 {
@@ -60,6 +67,13 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x101>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2_cache_l>;
 		};
 
 		cpu102: cpu@102 {
@@ -67,6 +81,13 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x102>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2_cache_l>;
 		};
 
 		cpu103: cpu@103 {
@@ -74,6 +95,13 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x103>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2_cache_l>;
 		};
 
 		cpu0: cpu@0 {
@@ -81,6 +109,13 @@
 			compatible = "arm,cortex-a73";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			d-cache-line-size = <64>;
+			d-cache-size = <0x10000>;
+			d-cache-sets = <64>;
+			i-cache-line-size = <64>;
+			i-cache-size = <0x10000>;
+			i-cache-sets = <64>;
+			next-level-cache = <&l2_cache_b>;
 		};
 
 		cpu1: cpu@1 {
@@ -88,6 +123,13 @@
 			compatible = "arm,cortex-a73";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			d-cache-line-size = <64>;
+			d-cache-size = <0x10000>;
+			d-cache-sets = <64>;
+			i-cache-line-size = <64>;
+			i-cache-size = <0x10000>;
+			i-cache-sets = <64>;
+			next-level-cache = <&l2_cache_b>;
 		};
 
 		cpu2: cpu@2 {
@@ -95,6 +137,13 @@
 			compatible = "arm,cortex-a73";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
+			d-cache-line-size = <64>;
+			d-cache-size = <0x10000>;
+			d-cache-sets = <64>;
+			i-cache-line-size = <64>;
+			i-cache-size = <0x10000>;
+			i-cache-sets = <64>;
+			next-level-cache = <&l2_cache_b>;
 		};
 
 		cpu3: cpu@3 {
@@ -102,6 +151,31 @@
 			compatible = "arm,cortex-a73";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
+			d-cache-line-size = <64>;
+			d-cache-size = <0x10000>;
+			d-cache-sets = <64>;
+			i-cache-line-size = <64>;
+			i-cache-size = <0x10000>;
+			i-cache-sets = <64>;
+			next-level-cache = <&l2_cache_b>;
+		};
+
+		l2_cache_l: l2-cache-cluster0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x40000>;  /* L2. 256 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
+		};
+
+		l2_cache_b: l2-cache-cluster1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x100000>; /* L2. 1 Mb */
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
index f7f25a10f409..27b68ed85c4c 100644
--- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
@@ -27,6 +27,12 @@
 			compatible = "arm,cortex-a35";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -36,6 +42,12 @@
 			compatible = "arm,cortex-a35";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -44,6 +56,9 @@
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
+			cache-size = <0x80000>; /* L2. 512 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 2df143aa77ce..04fb130ac7c6 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -83,6 +83,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
 			dynamic-power-coefficient = <140>;
@@ -94,6 +100,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
 			dynamic-power-coefficient = <140>;
@@ -105,6 +117,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
 			dynamic-power-coefficient = <140>;
@@ -115,6 +133,9 @@
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
+			cache-size = <0x80000>; /* L2. 512 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index deee61dbe074..1321ad95923d 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -17,6 +17,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -26,6 +32,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -35,6 +47,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -44,6 +62,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -52,6 +76,9 @@
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
+			cache-size = <0x80000>; /* L2. 512 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
index 86e6ceb31d5e..f04efa828256 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b.dtsi
@@ -49,7 +49,13 @@
 			reg = <0x0 0x0>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <592>;
-			next-level-cache = <&l2>;
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2_cache_l>;
 			#cooling-cells = <2>;
 		};
 
@@ -59,7 +65,13 @@
 			reg = <0x0 0x1>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <592>;
-			next-level-cache = <&l2>;
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2_cache_l>;
 			#cooling-cells = <2>;
 		};
 
@@ -69,7 +81,13 @@
 			reg = <0x0 0x100>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&l2>;
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2_cache_l>;
 			#cooling-cells = <2>;
 		};
 
@@ -79,7 +97,13 @@
 			reg = <0x0 0x101>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&l2>;
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
+			next-level-cache = <&l2_cache_l>;
 			#cooling-cells = <2>;
 		};
 
@@ -89,7 +113,13 @@
 			reg = <0x0 0x102>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&l2>;
+			d-cache-line-size = <64>;
+			d-cache-size = <0x10000>;
+			d-cache-sets = <64>;
+			i-cache-line-size = <64>;
+			i-cache-size = <0x10000>;
+			i-cache-sets = <64>;
+			next-level-cache = <&l2_cache_b>;
 			#cooling-cells = <2>;
 		};
 
@@ -99,14 +129,32 @@
 			reg = <0x0 0x103>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
-			next-level-cache = <&l2>;
+			d-cache-line-size = <64>;
+			d-cache-size = <0x10000>;
+			d-cache-sets = <64>;
+			i-cache-line-size = <64>;
+			i-cache-size = <0x10000>;
+			i-cache-sets = <64>;
+			next-level-cache = <&l2_cache_b>;
 			#cooling-cells = <2>;
 		};
 
-		l2: l2-cache0 {
+		l2_cache_l: l2-cache-cluster0 {
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
+			cache-size = <0x40000>;  /* L2. 256 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
+		};
+
+		l2_cache_b: l2-cache-cluster1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x100000>; /* L2. 1MB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
index 7d99ca44e660..c1d8e81d95cb 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gx.dtsi
@@ -95,6 +95,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
 			#cooling-cells = <2>;
@@ -105,6 +111,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
 			#cooling-cells = <2>;
@@ -115,6 +127,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
 			#cooling-cells = <2>;
@@ -125,6 +143,12 @@
 			compatible = "arm,cortex-a53";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 0>;
 			#cooling-cells = <2>;
@@ -134,6 +158,9 @@
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
+			cache-size = <0x80000>; /* L2. 512 KB */
+			cache-line-size = <64>;
+			cache-sets = <512>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
index 959bd8d77a82..12e26f99d4f0 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-odroidc2.dts
@@ -348,10 +348,6 @@
 
 	bus-width = <4>;
 	cap-sd-highspeed;
-	sd-uhs-sdr12;
-	sd-uhs-sdr25;
-	sd-uhs-sdr50;
-	sd-uhs-ddr50;
 	max-frequency = <100000000>;
 	disable-wp;
 
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
index 411cc312fc62..514c9bea6423 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxm.dtsi
@@ -64,6 +64,12 @@
 			reg = <0x0 0x100>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 1>;
 			#cooling-cells = <2>;
@@ -75,6 +81,12 @@
 			reg = <0x0 0x101>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 1>;
 			#cooling-cells = <2>;
@@ -86,6 +98,12 @@
 			reg = <0x0 0x102>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 1>;
 			#cooling-cells = <2>;
@@ -97,6 +115,12 @@
 			reg = <0x0 0x103>;
 			enable-method = "psci";
 			capacity-dmips-mhz = <1024>;
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			clocks = <&scpi_dvfs 1>;
 			#cooling-cells = <2>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
index 538b35036954..5e07f0f9538e 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1-bananapi.dtsi
@@ -380,11 +380,10 @@
 
 	bus-width = <4>;
 	cap-sd-highspeed;
-	max-frequency = <50000000>;
+	/* Boot failures are observed at 50MHz */
+	max-frequency = <35000000>;
 	disable-wp;
 
-	/* TOFIX: SD card is barely usable in SDR modes */
-
 	cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&tflash_vdd>;
 	vqmmc-supply = <&vddio_c>;
diff --git a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
index 966ebb19cc55..e5db8ce94062 100644
--- a/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-sm1.dtsi
@@ -55,6 +55,12 @@
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x0>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -64,6 +70,12 @@
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x1>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -73,6 +85,12 @@
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x2>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -82,6 +100,12 @@
 			compatible = "arm,cortex-a55";
 			reg = <0x0 0x3>;
 			enable-method = "psci";
+			d-cache-line-size = <32>;
+			d-cache-size = <0x8000>;
+			d-cache-sets = <32>;
+			i-cache-line-size = <32>;
+			i-cache-size = <0x8000>;
+			i-cache-sets = <32>;
 			next-level-cache = <&l2>;
 			#cooling-cells = <2>;
 		};
@@ -90,6 +114,9 @@
 			compatible = "cache";
 			cache-level = <2>;
 			cache-unified;
+			cache-size = <0x40000>; /* L2. 256 KB */
+			cache-line-size = <64>;
+			cache-sets = <256>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
index 5a64239b4708..5bbedb0a7107 100644
--- a/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-shadowcat.dtsi
@@ -22,7 +22,6 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_0>;
-			#clock-cells = <1>;
 			clocks = <&pmd0clk 0>;
 		};
 		cpu@1 {
@@ -32,7 +31,6 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_0>;
-			#clock-cells = <1>;
 			clocks = <&pmd0clk 0>;
 		};
 		cpu@100 {
@@ -42,7 +40,6 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_1>;
-			#clock-cells = <1>;
 			clocks = <&pmd1clk 0>;
 		};
 		cpu@101 {
@@ -52,7 +49,6 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_1>;
-			#clock-cells = <1>;
 			clocks = <&pmd1clk 0>;
 		};
 		cpu@200 {
@@ -62,7 +58,6 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_2>;
-			#clock-cells = <1>;
 			clocks = <&pmd2clk 0>;
 		};
 		cpu@201 {
@@ -72,7 +67,6 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_2>;
-			#clock-cells = <1>;
 			clocks = <&pmd2clk 0>;
 		};
 		cpu@300 {
@@ -82,7 +76,6 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_3>;
-			#clock-cells = <1>;
 			clocks = <&pmd3clk 0>;
 		};
 		cpu@301 {
@@ -92,7 +85,6 @@
 			enable-method = "spin-table";
 			cpu-release-addr = <0x1 0x0000fff8>;
 			next-level-cache = <&xgene_L2_3>;
-			#clock-cells = <1>;
 			clocks = <&pmd3clk 0>;
 		};
 		xgene_L2_0: l2-cache-0 {
@@ -211,9 +203,9 @@
 		};
 	};
 
-	refclk: refclk {
+	refclk: clock-100000000 {
 		compatible = "fixed-clock";
-		#clock-cells = <1>;
+		#clock-cells = <0>;
 		clock-frequency = <100000000>;
 		clock-output-names = "refclk";
 	};
@@ -232,6 +224,16 @@
 		clock-frequency = <50000000>;
 	};
 
+	i2cslimpro {
+		compatible = "apm,xgene-slimpro-i2c";
+		mboxes = <&mailbox 0>;
+	};
+
+	hwmonslimpro {
+		compatible = "apm,xgene-slimpro-hwmon";
+		mboxes = <&mailbox 7>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -246,7 +248,7 @@
 			pmdpll: pmdpll@170000f0 {
 				compatible = "apm,xgene-pcppll-v2-clock";
 				#clock-cells = <1>;
-				clocks = <&refclk 0>;
+				clocks = <&refclk>;
 				reg = <0x0 0x170000f0 0x0 0x10>;
 				clock-output-names = "pmdpll";
 			};
@@ -286,7 +288,7 @@
 			socpll: socpll@17000120 {
 				compatible = "apm,xgene-socpll-v2-clock";
 				#clock-cells = <1>;
-				clocks = <&refclk 0>;
+				clocks = <&refclk>;
 				reg = <0x0 0x17000120 0x0 0x1000>;
 				clock-output-names = "socpll";
 			};
@@ -585,16 +587,6 @@
 					0x0 0x7 0x4>;
 		};
 
-		i2cslimpro {
-			compatible = "apm,xgene-slimpro-i2c";
-			mboxes = <&mailbox 0>;
-		};
-
-		hwmonslimpro {
-			compatible = "apm,xgene-slimpro-hwmon";
-			mboxes = <&mailbox 7>;
-		};
-
 		serial0: serial@10600000 {
 			compatible = "ns16550";
 			reg = <0 0x10600000 0x0 0x1000>;
@@ -617,7 +609,7 @@
 		pcie0: pcie@1f2b0000 {
 			status = "disabled";
 			device_type = "pci";
-			compatible = "apm,xgene-pcie", "apm,xgene2-pcie";
+			compatible = "apm,xgene-pcie";
 			#interrupt-cells = <1>;
 			#size-cells = <2>;
 			#address-cells = <3>;
@@ -643,7 +635,7 @@
 		pcie1: pcie@1f2c0000 {
 			status = "disabled";
 			device_type = "pci";
-			compatible = "apm,xgene-pcie", "apm,xgene2-pcie";
+			compatible = "apm,xgene-pcie";
 			#interrupt-cells = <1>;
 			#size-cells = <2>;
 			#address-cells = <3>;
diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi
index 872093b05ce1..4ca0ead120c1 100644
--- a/arch/arm64/boot/dts/apm/apm-storm.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi
@@ -103,6 +103,7 @@
 
 	gic: interrupt-controller@78010000 {
 		compatible = "arm,cortex-a15-gic";
+		#address-cells = <0>;
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0x0 0x78010000 0x0 0x1000>,	/* GIC Dist */
@@ -112,9 +113,9 @@
 		interrupts = <1 9 0xf04>;	/* GIC Maintenence IRQ */
 	};
 
-	refclk: refclk {
+	refclk: clock-100000000 {
 		compatible = "fixed-clock";
-		#clock-cells = <1>;
+		#clock-cells = <0>;
 		clock-frequency = <100000000>;
 		clock-output-names = "refclk";
 	};
@@ -133,6 +134,16 @@
 		interrupts = <1 12 0xff04>;
 	};
 
+	i2cslimpro {
+		compatible = "apm,xgene-slimpro-i2c";
+		mboxes = <&mailbox 0>;
+	};
+
+	hwmonslimpro {
+		compatible = "apm,xgene-slimpro-hwmon";
+		mboxes = <&mailbox 7>;
+	};
+
 	soc {
 		compatible = "simple-bus";
 		#address-cells = <2>;
@@ -148,28 +159,25 @@
 			pcppll: pcppll@17000100 {
 				compatible = "apm,xgene-pcppll-clock";
 				#clock-cells = <1>;
-				clocks = <&refclk 0>;
+				clocks = <&refclk>;
 				clock-names = "pcppll";
 				reg = <0x0 0x17000100 0x0 0x1000>;
 				clock-output-names = "pcppll";
-				type = <0>;
 			};
 
 			socpll: socpll@17000120 {
 				compatible = "apm,xgene-socpll-clock";
 				#clock-cells = <1>;
-				clocks = <&refclk 0>;
+				clocks = <&refclk>;
 				clock-names = "socpll";
 				reg = <0x0 0x17000120 0x0 0x1000>;
 				clock-output-names = "socpll";
-				type = <1>;
 			};
 
 			socplldiv2: socplldiv2  {
 				compatible = "fixed-factor-clock";
-				#clock-cells = <1>;
+				#clock-cells = <0>;
 				clocks = <&socpll 0>;
-				clock-names = "socplldiv2";
 				clock-mult = <1>;
 				clock-div = <2>;
 				clock-output-names = "socplldiv2";
@@ -178,7 +186,7 @@
 			ahbclk: ahbclk@17000000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x17000000 0x0 0x2000>;
 				reg-names = "div-reg";
 				divider-offset = <0x164>;
@@ -190,7 +198,7 @@
 			sdioclk: sdioclk@1f2ac000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f2ac000 0x0 0x1000
 					0x0 0x17000000 0x0 0x2000>;
 				reg-names = "csr-reg", "div-reg";
@@ -207,7 +215,7 @@
 			ethclk: ethclk {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				clock-names = "ethclk";
 				reg = <0x0 0x17000000 0x0 0x1000>;
 				reg-names = "div-reg";
@@ -229,7 +237,7 @@
 			sge0clk: sge0clk@1f21c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f21c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				csr-mask = <0xa>;
@@ -240,7 +248,7 @@
 			xge0clk: xge0clk@1f61c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f61c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				csr-mask = <0x3>;
@@ -251,7 +259,7 @@
 				compatible = "apm,xgene-device-clock";
 				status = "disabled";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f62c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				csr-mask = <0x3>;
@@ -261,7 +269,7 @@
 			sataphy1clk: sataphy1clk@1f21c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f21c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "sataphy1clk";
@@ -275,7 +283,7 @@
 			sataphy2clk: sataphy1clk@1f22c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f22c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "sataphy2clk";
@@ -289,7 +297,7 @@
 			sataphy3clk: sataphy1clk@1f23c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f23c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "sataphy3clk";
@@ -303,7 +311,7 @@
 			sata01clk: sata01clk@1f21c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f21c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "sata01clk";
@@ -316,7 +324,7 @@
 			sata23clk: sata23clk@1f22c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f22c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "sata23clk";
@@ -329,7 +337,7 @@
 			sata45clk: sata45clk@1f23c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f23c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "sata45clk";
@@ -342,7 +350,7 @@
 			rtcclk: rtcclk@17000000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x17000000 0x0 0x2000>;
 				reg-names = "csr-reg";
 				csr-offset = <0xc>;
@@ -355,7 +363,7 @@
 			rngpkaclk: rngpkaclk@17000000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x17000000 0x0 0x2000>;
 				reg-names = "csr-reg";
 				csr-offset = <0xc>;
@@ -369,7 +377,7 @@
 				status = "disabled";
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f2bc000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "pcie0clk";
@@ -379,7 +387,7 @@
 				status = "disabled";
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f2cc000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "pcie1clk";
@@ -389,7 +397,7 @@
 				status = "disabled";
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f2dc000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "pcie2clk";
@@ -399,7 +407,7 @@
 				status = "disabled";
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f50c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "pcie3clk";
@@ -409,7 +417,7 @@
 				status = "disabled";
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f51c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "pcie4clk";
@@ -418,7 +426,7 @@
 			dmaclk: dmaclk@1f27c000 {
 				compatible = "apm,xgene-device-clock";
 				#clock-cells = <1>;
-				clocks = <&socplldiv2 0>;
+				clocks = <&socplldiv2>;
 				reg = <0x0 0x1f27c000 0x0 0x1000>;
 				reg-names = "csr-reg";
 				clock-output-names = "dmaclk";
@@ -760,16 +768,6 @@
 					<0x0 0x7 0x4>;
 		};
 
-		i2cslimpro {
-			compatible = "apm,xgene-slimpro-i2c";
-			mboxes = <&mailbox 0>;
-		};
-
-		hwmonslimpro {
-			compatible = "apm,xgene-slimpro-hwmon";
-			mboxes = <&mailbox 7>;
-		};
-
 		serial0: serial@1c020000 {
 			status = "disabled";
 			compatible = "ns16550a";
@@ -849,7 +847,6 @@
 			compatible = "snps,designware-i2c";
 			reg = <0x0 0x10512000 0x0 0x1000>;
 			interrupts = <0 0x44 0x4>;
-			#clock-cells = <1>;
 			clocks = <&ahbclk 0>;
 		};
 
diff --git a/arch/arm64/boot/dts/apple/Makefile b/arch/arm64/boot/dts/apple/Makefile
index 4f337bff36cd..4eebcd85c90f 100644
--- a/arch/arm64/boot/dts/apple/Makefile
+++ b/arch/arm64/boot/dts/apple/Makefile
@@ -79,6 +79,15 @@ dtb-$(CONFIG_ARCH_APPLE) += t6000-j316s.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t6001-j316c.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t6001-j375c.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t6002-j375d.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6022-j180d.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6020-j414s.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6021-j414c.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6020-j416s.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6021-j416c.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6020-j474s.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6021-j475c.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t6022-j475d.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t8112-j413.dtb
+dtb-$(CONFIG_ARCH_APPLE) += t8112-j415.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t8112-j473.dtb
 dtb-$(CONFIG_ARCH_APPLE) += t8112-j493.dtb
diff --git a/arch/arm64/boot/dts/apple/s5l8960x.dtsi b/arch/arm64/boot/dts/apple/s5l8960x.dtsi
index 5b5175d6978c..462ffdd348fc 100644
--- a/arch/arm64/boot/dts/apple/s5l8960x.dtsi
+++ b/arch/arm64/boot/dts/apple/s5l8960x.dtsi
@@ -89,6 +89,62 @@
 			status = "disabled";
 		};
 
+		i2c0: i2c@20a110000 {
+			compatible = "apple,s5l8960x-i2c", "apple,i2c";
+			reg = <0x2 0x0a110000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 154 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@20a111000 {
+			compatible = "apple,s5l8960x-i2c", "apple,i2c";
+			reg = <0x2 0x0a111000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 155 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@20a112000 {
+			compatible = "apple,s5l8960x-i2c", "apple,i2c";
+			reg = <0x2 0x0a112000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 156 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@20a113000 {
+			compatible = "apple,s5l8960x-i2c", "apple,i2c";
+			reg = <0x2 0x0a113000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 157 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		pmgr: power-management@20e000000 {
 			compatible = "apple,s5l8960x-pmgr", "apple,pmgr", "syscon", "simple-mfd";
 			#address-cells = <1>;
@@ -140,6 +196,26 @@
 				     <AIC_IRQ 112 IRQ_TYPE_LEVEL_HIGH>,
 				     <AIC_IRQ 113 IRQ_TYPE_LEVEL_HIGH>,
 				     <AIC_IRQ 114 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(81, 1)>,
+					 <APPLE_PINMUX(80, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(83, 1)>,
+					 <APPLE_PINMUX(82, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(101, 1)>,
+					 <APPLE_PINMUX(100, 1)>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pinmux = <APPLE_PINMUX(172, 1)>,
+					 <APPLE_PINMUX(171, 1)>;
+			};
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/apple/s800-0-3.dtsi b/arch/arm64/boot/dts/apple/s800-0-3.dtsi
index 09db4ed64054..bb38662b7d2e 100644
--- a/arch/arm64/boot/dts/apple/s800-0-3.dtsi
+++ b/arch/arm64/boot/dts/apple/s800-0-3.dtsi
@@ -88,6 +88,48 @@
 			status = "disabled";
 		};
 
+		i2c0: i2c@20a110000 {
+			compatible = "apple,s8000-i2c", "apple,i2c";
+			reg = <0x2 0x0a110000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 206 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@20a111000 {
+			compatible = "apple,s8000-i2c", "apple,i2c";
+			reg = <0x2 0x0a111000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 207 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@20a112000 {
+			compatible = "apple,s8000-i2c", "apple,i2c";
+			reg = <0x2 0x0a112000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 208 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		pmgr: power-management@20e000000 {
 			compatible = "apple,s8000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
 			#address-cells = <1>;
@@ -131,6 +173,21 @@
 				     <AIC_IRQ 46 IRQ_TYPE_LEVEL_HIGH>,
 				     <AIC_IRQ 47 IRQ_TYPE_LEVEL_HIGH>,
 				     <AIC_IRQ 48 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(46, 1)>,
+					 <APPLE_PINMUX(45, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(115, 1)>,
+					 <APPLE_PINMUX(114, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(23, 1)>,
+					 <APPLE_PINMUX(22, 1)>;
+			};
 		};
 
 		pinctrl_aop: pinctrl@2100f0000 {
diff --git a/arch/arm64/boot/dts/apple/s8001.dtsi b/arch/arm64/boot/dts/apple/s8001.dtsi
index fee350765894..b5b00dca6ffa 100644
--- a/arch/arm64/boot/dts/apple/s8001.dtsi
+++ b/arch/arm64/boot/dts/apple/s8001.dtsi
@@ -137,6 +137,62 @@
 			status = "disabled";
 		};
 
+		i2c0: i2c@20a110000 {
+			compatible = "apple,s8000-i2c", "apple,i2c";
+			reg = <0x2 0x0a110000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 232 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@20a111000 {
+			compatible = "apple,s8000-i2c", "apple,i2c";
+			reg = <0x2 0x0a111000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 233 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@20a112000 {
+			compatible = "apple,s8000-i2c", "apple,i2c";
+			reg = <0x2 0x0a112000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 234 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@20a113000 {
+			compatible = "apple,s8000-i2c", "apple,i2c";
+			reg = <0x2 0x0a113000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 235 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		pmgr: power-management@20e000000 {
 			compatible = "apple,s8000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
 			#address-cells = <1>;
@@ -173,6 +229,26 @@
 				     <AIC_IRQ 46 IRQ_TYPE_LEVEL_HIGH>,
 				     <AIC_IRQ 47 IRQ_TYPE_LEVEL_HIGH>,
 				     <AIC_IRQ 48 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(165, 1)>,
+					 <APPLE_PINMUX(164, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(178, 1)>,
+					 <APPLE_PINMUX(177, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(132, 1)>,
+					 <APPLE_PINMUX(131, 1)>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pinmux = <APPLE_PINMUX(115, 1)>,
+					 <APPLE_PINMUX(114, 1)>;
+			};
 		};
 
 		pinctrl_aop: pinctrl@2100f0000 {
diff --git a/arch/arm64/boot/dts/apple/t6000-j314s.dts b/arch/arm64/boot/dts/apple/t6000-j314s.dts
index c9e192848fe3..1430b91ff1b1 100644
--- a/arch/arm64/boot/dts/apple/t6000-j314s.dts
+++ b/arch/arm64/boot/dts/apple/t6000-j314s.dts
@@ -16,3 +16,11 @@
 	compatible = "apple,j314s", "apple,t6000", "apple,arm-platform";
 	model = "Apple MacBook Pro (14-inch, M1 Pro, 2021)";
 };
+
+&wifi0 {
+	brcm,board-type = "apple,maldives";
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,maldives";
+};
diff --git a/arch/arm64/boot/dts/apple/t6000-j316s.dts b/arch/arm64/boot/dts/apple/t6000-j316s.dts
index ff1803ce2300..da0cbe7d9673 100644
--- a/arch/arm64/boot/dts/apple/t6000-j316s.dts
+++ b/arch/arm64/boot/dts/apple/t6000-j316s.dts
@@ -16,3 +16,11 @@
 	compatible = "apple,j316s", "apple,t6000", "apple,arm-platform";
 	model = "Apple MacBook Pro (16-inch, M1 Pro, 2021)";
 };
+
+&wifi0 {
+	brcm,board-type = "apple,madagascar";
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,madagascar";
+};
diff --git a/arch/arm64/boot/dts/apple/t6001-j314c.dts b/arch/arm64/boot/dts/apple/t6001-j314c.dts
index 1761d15b98c1..c37097dcfdb3 100644
--- a/arch/arm64/boot/dts/apple/t6001-j314c.dts
+++ b/arch/arm64/boot/dts/apple/t6001-j314c.dts
@@ -16,3 +16,11 @@
 	compatible = "apple,j314c", "apple,t6001", "apple,arm-platform";
 	model = "Apple MacBook Pro (14-inch, M1 Max, 2021)";
 };
+
+&wifi0 {
+	brcm,board-type = "apple,maldives";
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,maldives";
+};
diff --git a/arch/arm64/boot/dts/apple/t6001-j316c.dts b/arch/arm64/boot/dts/apple/t6001-j316c.dts
index 750e9beeffc0..3bc6e0c3294c 100644
--- a/arch/arm64/boot/dts/apple/t6001-j316c.dts
+++ b/arch/arm64/boot/dts/apple/t6001-j316c.dts
@@ -16,3 +16,11 @@
 	compatible = "apple,j316c", "apple,t6001", "apple,arm-platform";
 	model = "Apple MacBook Pro (16-inch, M1 Max, 2021)";
 };
+
+&wifi0 {
+	brcm,board-type = "apple,madagascar";
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,madagascar";
+};
diff --git a/arch/arm64/boot/dts/apple/t6001-j375c.dts b/arch/arm64/boot/dts/apple/t6001-j375c.dts
index 62ea437b58b2..2e7c23714d4d 100644
--- a/arch/arm64/boot/dts/apple/t6001-j375c.dts
+++ b/arch/arm64/boot/dts/apple/t6001-j375c.dts
@@ -16,3 +16,11 @@
 	compatible = "apple,j375c", "apple,t6001", "apple,arm-platform";
 	model = "Apple Mac Studio (M1 Max, 2022)";
 };
+
+&wifi0 {
+	brcm,board-type = "apple,okinawa";
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,okinawa";
+};
diff --git a/arch/arm64/boot/dts/apple/t6002-j375d.dts b/arch/arm64/boot/dts/apple/t6002-j375d.dts
index 3365429bdc8b..2b7f80119618 100644
--- a/arch/arm64/boot/dts/apple/t6002-j375d.dts
+++ b/arch/arm64/boot/dts/apple/t6002-j375d.dts
@@ -38,6 +38,14 @@
 	};
 };
 
+&wifi0 {
+	brcm,board-type = "apple,okinawa";
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,okinawa";
+};
+
 /* delete unused always-on power-domains on die 1 */
 
 /delete-node/ &ps_atc2_usb_aon_die1;
diff --git a/arch/arm64/boot/dts/apple/t600x-die0.dtsi b/arch/arm64/boot/dts/apple/t600x-die0.dtsi
index 1563b3ce1ff6..3603b276a2ab 100644
--- a/arch/arm64/boot/dts/apple/t600x-die0.dtsi
+++ b/arch/arm64/boot/dts/apple/t600x-die0.dtsi
@@ -24,6 +24,41 @@
 		power-domains = <&ps_aic>;
 	};
 
+	smc: smc@290400000 {
+		compatible = "apple,t6000-smc", "apple,smc";
+		reg = <0x2 0x90400000 0x0 0x4000>,
+			<0x2 0x91e00000 0x0 0x100000>;
+		reg-names = "smc", "sram";
+		mboxes = <&smc_mbox>;
+
+		smc_gpio: gpio {
+			compatible = "apple,smc-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		smc_reboot: reboot {
+			compatible = "apple,smc-reboot";
+			nvmem-cells = <&shutdown_flag>, <&boot_stage>,
+				<&boot_error_count>, <&panic_count>;
+			nvmem-cell-names = "shutdown_flag", "boot_stage",
+				"boot_error_count", "panic_count";
+		};
+	};
+
+	smc_mbox: mbox@290408000 {
+		compatible = "apple,t6000-asc-mailbox", "apple,asc-mailbox-v4";
+		reg = <0x2 0x90408000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 754 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 755 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 756 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 757 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "send-empty", "send-not-empty",
+			"recv-empty", "recv-not-empty";
+		#mbox-cells = <0>;
+	};
+
 	pinctrl_smc: pinctrl@290820000 {
 		compatible = "apple,t6000-pinctrl", "apple,pinctrl";
 		reg = <0x2 0x90820000 0x0 0x4000>;
diff --git a/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi b/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi
index 22ebc78e120b..c0aac59a6fae 100644
--- a/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi
+++ b/arch/arm64/boot/dts/apple/t600x-j314-j316.dtsi
@@ -13,6 +13,7 @@
 
 / {
 	aliases {
+		bluetooth0 = &bluetooth0;
 		serial0 = &serial0;
 		wifi0 = &wifi0;
 	};
@@ -99,9 +100,18 @@
 	/* WLAN */
 	bus-range = <1 1>;
 	wifi0: wifi@0,0 {
+		compatible = "pci14e4,4433";
 		reg = <0x10000 0x0 0x0 0x0 0x0>;
 		/* To be filled by the loader */
 		local-mac-address = [00 10 18 00 00 10];
+		apple,antenna-sku = "XX";
+	};
+
+	bluetooth0: bluetooth@0,1 {
+		compatible = "pci14e4,5f71";
+		reg = <0x10100 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-bd-address = [00 00 00 00 00 00];
 	};
 };
 
diff --git a/arch/arm64/boot/dts/apple/t600x-j375.dtsi b/arch/arm64/boot/dts/apple/t600x-j375.dtsi
index d5b985ad5679..c0fb93ae72f4 100644
--- a/arch/arm64/boot/dts/apple/t600x-j375.dtsi
+++ b/arch/arm64/boot/dts/apple/t600x-j375.dtsi
@@ -11,6 +11,8 @@
 
 / {
 	aliases {
+		bluetooth0 = &bluetooth0;
+		ethernet0 = &ethernet0;
 		serial0 = &serial0;
 		wifi0 = &wifi0;
 	};
@@ -84,9 +86,18 @@
 	/* WLAN */
 	bus-range = <1 1>;
 	wifi0: wifi@0,0 {
+		compatible = "pci14e4,4433";
 		reg = <0x10000 0x0 0x0 0x0 0x0>;
 		/* To be filled by the loader */
 		local-mac-address = [00 10 18 00 00 10];
+		apple,antenna-sku = "XX";
+	};
+
+	bluetooth0: bluetooth@0,1 {
+		compatible = "pci14e4,5f71";
+		reg = <0x10100 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-bd-address = [00 00 00 00 00 00];
 	};
 };
 
diff --git a/arch/arm64/boot/dts/apple/t6020-j414s.dts b/arch/arm64/boot/dts/apple/t6020-j414s.dts
new file mode 100644
index 000000000000..631c54c5f03d
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6020-j414s.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (14-inch, M2 Pro, 2023)
+ *
+ * target-type: J414s
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6020.dtsi"
+#include "t602x-j414-j416.dtsi"
+
+/ {
+	compatible = "apple,j414s", "apple,t6020", "apple,arm-platform";
+	model = "Apple MacBook Pro (14-inch, M2 Pro, 2023)";
+};
+
+&wifi0 {
+	brcm,board-type = "apple,tokara";
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,tokara";
+};
diff --git a/arch/arm64/boot/dts/apple/t6020-j416s.dts b/arch/arm64/boot/dts/apple/t6020-j416s.dts
new file mode 100644
index 000000000000..c277ed5889a2
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6020-j416s.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (16-inch, M2 Pro, 2023)
+ *
+ * target-type: J416s
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6020.dtsi"
+#include "t602x-j414-j416.dtsi"
+
+/ {
+	compatible = "apple,j416s", "apple,t6020", "apple,arm-platform";
+	model = "Apple MacBook Pro (16-inch, M2 Pro, 2023)";
+};
+
+&wifi0 {
+	brcm,board-type = "apple,amami";
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,amami";
+};
diff --git a/arch/arm64/boot/dts/apple/t6020-j474s.dts b/arch/arm64/boot/dts/apple/t6020-j474s.dts
new file mode 100644
index 000000000000..7c7ad5b8ad18
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6020-j474s.dts
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac mini (M2 Pro, 2023)
+ *
+ * target-type: J474s
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6020.dtsi"
+
+/*
+ * This model is very similar to M1 and M2 Mac Studio models so base it on those
+ * and remove the missing SDHCI controller.
+ */
+
+#include "t602x-j474-j475.dtsi"
+
+/ {
+	compatible = "apple,j474s", "apple,t6020", "apple,arm-platform";
+	model = "Apple Mac mini (M2 Pro, 2023)";
+};
+
+/* PCIe devices */
+&wifi0 {
+	compatible = "pci14e4,4434";
+	brcm,board-type = "apple,tasmania";
+};
+
+&bluetooth0 {
+	compatible = "pci14e4,5f72";
+	brcm,board-type = "apple,tasmania";
+};
+
+/*
+ * port01 is unused, remove the PCIe sdhci0 node from t600x-j375.dtsi and adjust
+ * the iommu-map.
+ */
+/delete-node/ &sdhci0;
+
+&pcie0 {
+	iommu-map = <0x100 &pcie0_dart_0 1 1>,
+			<0x200 &pcie0_dart_2 1 1>,
+			<0x300 &pcie0_dart_3 1 1>;
+};
diff --git a/arch/arm64/boot/dts/apple/t6020.dtsi b/arch/arm64/boot/dts/apple/t6020.dtsi
new file mode 100644
index 000000000000..bffa66a3ffff
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6020.dtsi
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T6020 "M2 Pro" SoC
+ *
+ * Other names: H14J, "Rhodes Chop"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/* This chip is just a cut down version of t6021, so include it and disable the missing parts */
+
+#include "t6021.dtsi"
+
+/ {
+	compatible = "apple,t6020", "apple,arm-platform";
+};
+
+/delete-node/ &pmgr_south;
+
+&gpu {
+	compatible = "apple,agx-g14s";
+};
diff --git a/arch/arm64/boot/dts/apple/t6021-j414c.dts b/arch/arm64/boot/dts/apple/t6021-j414c.dts
new file mode 100644
index 000000000000..cdcf0740714d
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6021-j414c.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (14-inch, M2 Max, 2023)
+ *
+ * target-type: J414c
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6021.dtsi"
+#include "t602x-j414-j416.dtsi"
+
+/ {
+	compatible = "apple,j414c", "apple,t6021", "apple,arm-platform";
+	model = "Apple MacBook Pro (14-inch, M2 Max, 2023)";
+};
+
+&wifi0 {
+	brcm,board-type = "apple,tokara";
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,tokara";
+};
diff --git a/arch/arm64/boot/dts/apple/t6021-j416c.dts b/arch/arm64/boot/dts/apple/t6021-j416c.dts
new file mode 100644
index 000000000000..6d8146b94170
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6021-j416c.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (16-inch, M2 Max, 2022)
+ *
+ * target-type: J416c
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6021.dtsi"
+#include "t602x-j414-j416.dtsi"
+
+/ {
+	compatible = "apple,j416c", "apple,t6021", "apple,arm-platform";
+	model = "Apple MacBook Pro (16-inch, M2 Max, 2023)";
+};
+
+&wifi0 {
+	brcm,board-type = "apple,amami";
+};
+
+&bluetooth0 {
+	brcm,board-type = "apple,amami";
+};
diff --git a/arch/arm64/boot/dts/apple/t6021-j475c.dts b/arch/arm64/boot/dts/apple/t6021-j475c.dts
new file mode 100644
index 000000000000..533e35774874
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6021-j475c.dts
@@ -0,0 +1,37 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac Studio (M2 Max, 2023)
+ *
+ * target-type: J475c
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6021.dtsi"
+#include "t602x-j474-j475.dtsi"
+
+/ {
+	compatible = "apple,j475c", "apple,t6021", "apple,arm-platform";
+	model = "Apple Mac Studio (M2 Max, 2023)";
+};
+
+&wifi0 {
+	compatible = "pci14e4,4434";
+	brcm,board-type = "apple,canary";
+};
+
+&bluetooth0 {
+	compatible = "pci14e4,5f72";
+	brcm,board-type = "apple,canary";
+};
+
+/* enable PCIe port01 with SDHCI */
+&port01 {
+	status = "okay";
+};
+
+&pcie0_dart_1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t6021.dtsi b/arch/arm64/boot/dts/apple/t6021.dtsi
new file mode 100644
index 000000000000..62907ad6a546
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6021.dtsi
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T6021 "M2 Max" SoC
+ *
+ * Other names: H14J, "Rhodes"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/spmi/spmi.h>
+
+#include "multi-die-cpp.h"
+
+#include "t602x-common.dtsi"
+
+/ {
+	compatible = "apple,t6021", "apple,arm-platform";
+
+	soc {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		ranges;
+		nonposted-mmio;
+
+		// filled via templated includes at the end of the file
+	};
+};
+
+#define DIE
+#define DIE_NO 0
+
+&{/soc} {
+	#include "t602x-die0.dtsi"
+	#include "t602x-dieX.dtsi"
+	#include "t602x-nvme.dtsi"
+};
+
+#include "t602x-gpio-pins.dtsi"
+#include "t602x-pmgr.dtsi"
+
+#undef DIE
+#undef DIE_NO
+
+
+&aic {
+	affinities {
+		e-core-pmu-affinity {
+			apple,fiq-index = <AIC_CPU_PMU_E>;
+			cpus = <&cpu_e00 &cpu_e01 &cpu_e02 &cpu_e03>;
+		};
+
+		p-core-pmu-affinity {
+			apple,fiq-index = <AIC_CPU_PMU_P>;
+			cpus = <&cpu_p00 &cpu_p01 &cpu_p02 &cpu_p03
+				&cpu_p10 &cpu_p11 &cpu_p12 &cpu_p13>;
+		};
+	};
+};
+
+&gpu {
+	compatible = "apple,agx-g14c", "apple,agx-g14s";
+};
diff --git a/arch/arm64/boot/dts/apple/t6022-j180d.dts b/arch/arm64/boot/dts/apple/t6022-j180d.dts
new file mode 100644
index 000000000000..dca6bd167c22
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6022-j180d.dts
@@ -0,0 +1,121 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac Pro (M2 Ultra, 2023)
+ *
+ * target-type: J180d
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6022.dtsi"
+#include "t6022-jxxxd.dtsi"
+
+/ {
+	compatible = "apple,j180d", "apple,t6022", "apple,arm-platform";
+	model = "Apple Mac Pro (M2 Ultra, 2023)";
+	aliases {
+		nvram = &nvram;
+		serial0 = &serial0;
+	};
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		stdout-path = "serial0";
+
+		framebuffer0: framebuffer@0 {
+			compatible = "apple,simple-framebuffer", "simple-framebuffer";
+			reg = <0 0 0 0>; /* To be filled by loader */
+			/* Format properties will be added by loader */
+			status = "disabled";
+			power-domains = <&ps_dispext0_cpu0_die1>, <&ps_dptx_phy_ps_die1>;
+		};
+	};
+
+	memory@10000000000 {
+		device_type = "memory";
+		reg = <0x100 0 0x2 0>; /* To be filled by loader */
+	};
+};
+
+&serial0 {
+	status = "okay";
+};
+
+/* USB Type C Rear */
+&i2c0 {
+	hpm2: usb-pd@3b {
+		compatible = "apple,cd321x";
+		reg = <0x3b>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm3: usb-pd@3c {
+		compatible = "apple,cd321x";
+		reg = <0x3c>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	/* hpm4 and hpm5 included from t6022-jxxxd.dtsi */
+
+	hpm6: usb-pd@3d {
+		compatible = "apple,cd321x";
+		reg = <0x3d>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm7: usb-pd@3e {
+		compatible = "apple,cd321x";
+		reg = <0x3e>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
+/* USB Type C Front */
+&i2c3 {
+	status = "okay";
+
+	hpm0: usb-pd@38 {
+		compatible = "apple,cd321x";
+		reg = <0x38>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <60 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	hpm1: usb-pd@3f {
+		compatible = "apple,cd321x";
+		reg = <0x3f>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <60 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
+/*
+ * Delete unused PCIe nodes, the Mac Pro uses slightly different PCIe
+ * controllers with a single port connected to a PM40100 PCIe switch
+ */
+/delete-node/ &pcie0;
+/delete-node/ &pcie0_dart_0;
+/delete-node/ &pcie0_dart_1;
+/delete-node/ &pcie0_dart_2;
+/delete-node/ &pcie0_dart_3;
+
+&nco_clkref {
+	clock-frequency = <1068000000>;
+};
+
+#include "spi1-nvram.dtsi"
diff --git a/arch/arm64/boot/dts/apple/t6022-j475d.dts b/arch/arm64/boot/dts/apple/t6022-j475d.dts
new file mode 100644
index 000000000000..736594544f79
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6022-j475d.dts
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac Studio (M2 Ultra, 2023)
+ *
+ * target-type: J475d
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t6022.dtsi"
+#include "t602x-j474-j475.dtsi"
+#include "t6022-jxxxd.dtsi"
+
+/ {
+	compatible = "apple,j475d", "apple,t6022", "apple,arm-platform";
+	model = "Apple Mac Studio (M2 Ultra, 2023)";
+};
+
+&framebuffer0 {
+	power-domains = <&ps_dispext0_cpu0_die1>, <&ps_dptx_phy_ps_die1>;
+};
+
+/* enable PCIe port01 with SDHCI */
+&port01 {
+	status = "okay";
+};
+
+&pcie0_dart_1 {
+	status = "okay";
+};
+
+&wifi0 {
+	compatible = "pci14e4,4434";
+	brcm,board-type = "apple,canary";
+};
+
+&bluetooth0 {
+	compatible = "pci14e4,5f72";
+	brcm,board-type = "apple,canary";
+};
diff --git a/arch/arm64/boot/dts/apple/t6022-jxxxd.dtsi b/arch/arm64/boot/dts/apple/t6022-jxxxd.dtsi
new file mode 100644
index 000000000000..4f7bf2ebfe39
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6022-jxxxd.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac Pro (M2 Ultra, 2023) and Mac Studio (M2 Ultra, 2023)
+ *
+ * This file contains the parts common to J180 and J475 devices with t6022.
+ *
+ * target-type: J180d / J475d
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/* delete power-domains for missing disp0 / disp0_die1 */
+/delete-node/ &ps_disp0_cpu0;
+/delete-node/ &ps_disp0_fe;
+
+/delete-node/ &ps_disp0_cpu0_die1;
+/delete-node/ &ps_disp0_fe_die1;
+
+/* USB Type C */
+&i2c0 {
+	/* front-right */
+	hpm4: usb-pd@39 {
+		compatible = "apple,cd321x";
+		reg = <0x39>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+
+	/* front-left */
+	hpm5: usb-pd@3a {
+		compatible = "apple,cd321x";
+		reg = <0x3a>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t6022.dtsi b/arch/arm64/boot/dts/apple/t6022.dtsi
new file mode 100644
index 000000000000..e73bf2f7510a
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t6022.dtsi
@@ -0,0 +1,349 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple T6022 "M2 Ultra" SoC
+ *
+ * Other names: H14J, "Rhodes 2C"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/apple-aic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/pinctrl/apple.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/spmi/spmi.h>
+
+#include "multi-die-cpp.h"
+
+#include "t602x-common.dtsi"
+
+/ {
+	compatible = "apple,t6022", "apple,arm-platform";
+
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		cpu-map {
+			cluster3 {
+				core0 {
+					cpu = <&cpu_e10>;
+				};
+				core1 {
+					cpu = <&cpu_e11>;
+				};
+				core2 {
+					cpu = <&cpu_e12>;
+				};
+				core3 {
+					cpu = <&cpu_e13>;
+				};
+			};
+
+			cluster4 {
+				core0 {
+					cpu = <&cpu_p20>;
+				};
+				core1 {
+					cpu = <&cpu_p21>;
+				};
+				core2 {
+					cpu = <&cpu_p22>;
+				};
+				core3 {
+					cpu = <&cpu_p23>;
+				};
+			};
+
+			cluster5 {
+				core0 {
+					cpu = <&cpu_p30>;
+				};
+				core1 {
+					cpu = <&cpu_p31>;
+				};
+				core2 {
+					cpu = <&cpu_p32>;
+				};
+				core3 {
+					cpu = <&cpu_p33>;
+				};
+			};
+		};
+
+		cpu_e10: cpu@800 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x800>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* to be filled by loader */
+			next-level-cache = <&l2_cache_3>;
+			i-cache-size  = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&blizzard_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e_die1>;
+		};
+
+		cpu_e11: cpu@801 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x801>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* to be filled by loader */
+			next-level-cache = <&l2_cache_3>;
+			i-cache-size  = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&blizzard_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e_die1>;
+		};
+
+		cpu_e12: cpu@802 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x802>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* to be filled by loader */
+			next-level-cache = <&l2_cache_3>;
+			i-cache-size  = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&blizzard_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e_die1>;
+		};
+
+		cpu_e13: cpu@803 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x803>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* to be filled by loader */
+			next-level-cache = <&l2_cache_3>;
+			i-cache-size  = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&blizzard_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e_die1>;
+		};
+
+		cpu_p20: cpu@10900 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10900>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_4>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0_die1>;
+		};
+
+		cpu_p21: cpu@10901 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10901>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_4>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0_die1>;
+		};
+
+		cpu_p22: cpu@10902 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10902>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_4>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0_die1>;
+		};
+
+		cpu_p23: cpu@10903 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10903>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_4>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0_die1>;
+		};
+
+		cpu_p30: cpu@10a00 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10a00>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_5>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1_die1>;
+		};
+
+		cpu_p31: cpu@10a01 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10a01>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_5>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1_die1>;
+		};
+
+		cpu_p32: cpu@10a02 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10a02>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_5>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1_die1>;
+		};
+
+		cpu_p33: cpu@10a03 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10a03>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_5>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1_die1>;
+		};
+
+		l2_cache_3: l2-cache-3 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x400000>;
+		};
+
+		l2_cache_4: l2-cache-4 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x1000000>;
+		};
+
+		l2_cache_5: l2-cache-5 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x1000000>;
+		};
+	};
+
+	die0: soc@200000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x02 0x00000000 0x02 0x00000000 0x4 0x00000000>,
+			 <0x05 0x80000000 0x05 0x80000000 0x1 0x80000000>,
+			 <0x07 0x00000000 0x07 0x00000000 0xf 0x80000000>,
+			 <0x16 0x80000000 0x16 0x80000000 0x5 0x80000000>;
+		nonposted-mmio;
+		/* Required to get >32-bit DMA via DARTs */
+		dma-ranges = <0 0 0 0 0xffffffff 0xffffc000>;
+
+		// filled via templated includes at the end of the file
+	};
+
+	die1: soc@2200000000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x02 0x00000000 0x22 0x00000000 0x4 0x00000000>,
+			 <0x07 0x00000000 0x27 0x00000000 0xf 0x80000000>,
+			 <0x16 0x80000000 0x36 0x80000000 0x5 0x80000000>;
+		nonposted-mmio;
+		/* Required to get >32-bit DMA via DARTs */
+		dma-ranges = <0 0 0 0 0xffffffff 0xffffc000>;
+
+		// filled via templated includes at the end of the file
+	};
+};
+
+#define DIE
+#define DIE_NO 0
+
+&die0 {
+	#include "t602x-die0.dtsi"
+	#include "t602x-dieX.dtsi"
+};
+
+#include "t602x-pmgr.dtsi"
+#include "t602x-gpio-pins.dtsi"
+
+#undef DIE
+#undef DIE_NO
+
+#define DIE _die1
+#define DIE_NO 1
+
+&die1 {
+	#include "t602x-dieX.dtsi"
+	#include "t602x-nvme.dtsi"
+};
+
+#include "t602x-pmgr.dtsi"
+
+/delete-node/ &ps_pmp_die1;
+
+#undef DIE
+#undef DIE_NO
+
+&aic {
+	affinities {
+		e-core-pmu-affinity {
+			apple,fiq-index = <AIC_CPU_PMU_E>;
+			cpus = <&cpu_e00 &cpu_e01 &cpu_e02 &cpu_e03
+				&cpu_e10 &cpu_e11 &cpu_e12 &cpu_e13>;
+		};
+
+		p-core-pmu-affinity {
+			apple,fiq-index = <AIC_CPU_PMU_P>;
+			cpus = <&cpu_p00 &cpu_p01 &cpu_p02 &cpu_p03
+				&cpu_p10 &cpu_p11 &cpu_p12 &cpu_p13
+				&cpu_p20 &cpu_p21 &cpu_p22 &cpu_p23
+				&cpu_p30 &cpu_p31 &cpu_p32 &cpu_p33>;
+		};
+	};
+};
+
+&ps_gfx {
+	// On t6022, the die0 GPU power domain needs both AFR power domains
+	power-domains = <&ps_afr>, <&ps_afr_die1>;
+};
+
+&gpu {
+	compatible = "apple,agx-g14d", "apple,agx-g14s";
+};
diff --git a/arch/arm64/boot/dts/apple/t602x-common.dtsi b/arch/arm64/boot/dts/apple/t602x-common.dtsi
new file mode 100644
index 000000000000..9c800a391e7e
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t602x-common.dtsi
@@ -0,0 +1,465 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Nodes common to all T602x family SoCs (M2 Pro/Max/Ultra)
+ *
+ * Other names: H14J, "Rhodes Chop", "Rhodes", "Rhodes 2C"
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		gpu = &gpu;
+	};
+
+	cpus {
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		cpu-map {
+			cluster0 {
+				core0 {
+					cpu = <&cpu_e00>;
+				};
+				core1 {
+					cpu = <&cpu_e01>;
+				};
+				core2 {
+					cpu = <&cpu_e02>;
+				};
+				core3 {
+					cpu = <&cpu_e03>;
+				};
+			};
+
+			cluster1 {
+				core0 {
+					cpu = <&cpu_p00>;
+				};
+				core1 {
+					cpu = <&cpu_p01>;
+				};
+				core2 {
+					cpu = <&cpu_p02>;
+				};
+				core3 {
+					cpu = <&cpu_p03>;
+				};
+			};
+
+			cluster2 {
+				core0 {
+					cpu = <&cpu_p10>;
+				};
+				core1 {
+					cpu = <&cpu_p11>;
+				};
+				core2 {
+					cpu = <&cpu_p12>;
+				};
+				core3 {
+					cpu = <&cpu_p13>;
+				};
+			};
+		};
+
+		cpu_e00: cpu@0 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x0>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* to be filled by loader */
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&blizzard_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e>;
+		};
+
+		cpu_e01: cpu@1 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x1>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* to be filled by loader */
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&blizzard_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e>;
+		};
+
+		cpu_e02: cpu@2 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x2>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* to be filled by loader */
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&blizzard_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e>;
+		};
+
+		cpu_e03: cpu@3 {
+			compatible = "apple,blizzard";
+			device_type = "cpu";
+			reg = <0x0 0x3>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* to be filled by loader */
+			next-level-cache = <&l2_cache_0>;
+			i-cache-size = <0x20000>;
+			d-cache-size = <0x10000>;
+			operating-points-v2 = <&blizzard_opp>;
+			capacity-dmips-mhz = <756>;
+			performance-domains = <&cpufreq_e>;
+		};
+
+		cpu_p00: cpu@10100 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10100>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0>;
+		};
+
+		cpu_p01: cpu@10101 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10101>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0>;
+		};
+
+		cpu_p02: cpu@10102 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10102>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0>;
+		};
+
+		cpu_p03: cpu@10103 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10103>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_1>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p0>;
+		};
+
+		cpu_p10: cpu@10200 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10200>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_2>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1>;
+		};
+
+		cpu_p11: cpu@10201 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10201>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_2>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1>;
+		};
+
+		cpu_p12: cpu@10202 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10202>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_2>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1>;
+		};
+
+		cpu_p13: cpu@10203 {
+			compatible = "apple,avalanche";
+			device_type = "cpu";
+			reg = <0x0 0x10203>;
+			enable-method = "spin-table";
+			cpu-release-addr = <0 0>; /* To be filled by loader */
+			next-level-cache = <&l2_cache_2>;
+			i-cache-size = <0x30000>;
+			d-cache-size = <0x20000>;
+			operating-points-v2 = <&avalanche_opp>;
+			capacity-dmips-mhz = <1024>;
+			performance-domains = <&cpufreq_p1>;
+		};
+
+		l2_cache_0: l2-cache-0 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x400000>;
+		};
+
+		l2_cache_1: l2-cache-1 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x1000000>;
+		};
+
+		l2_cache_2: l2-cache-2 {
+			compatible = "cache";
+			cache-level = <2>;
+			cache-unified;
+			cache-size = <0x1000000>;
+		};
+	 };
+
+	blizzard_opp: opp-table-0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		/* pstate #1 is a dummy clone of #2 */
+		opp02 {
+			opp-hz = /bits/ 64 <912000000>;
+			opp-level = <2>;
+			clock-latency-ns = <7700>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1284000000>;
+			opp-level = <3>;
+			clock-latency-ns = <25000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1752000000>;
+			opp-level = <4>;
+			clock-latency-ns = <33000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <2004000000>;
+			opp-level = <5>;
+			clock-latency-ns = <38000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <2256000000>;
+			opp-level = <6>;
+			clock-latency-ns = <44000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <2424000000>;
+			opp-level = <7>;
+			clock-latency-ns = <48000>;
+		};
+	};
+
+	avalanche_opp: opp-table-1 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp01 {
+			opp-hz = /bits/ 64 <702000000>;
+			opp-level = <1>;
+			clock-latency-ns = <7400>;
+		};
+		opp02 {
+			opp-hz = /bits/ 64 <948000000>;
+			opp-level = <2>;
+			clock-latency-ns = <18000>;
+		};
+		opp03 {
+			opp-hz = /bits/ 64 <1188000000>;
+			opp-level = <3>;
+			clock-latency-ns = <21000>;
+		};
+		opp04 {
+			opp-hz = /bits/ 64 <1452000000>;
+			opp-level = <4>;
+			clock-latency-ns = <24000>;
+		};
+		opp05 {
+			opp-hz = /bits/ 64 <1704000000>;
+			opp-level = <5>;
+			clock-latency-ns = <28000>;
+		};
+		opp06 {
+			opp-hz = /bits/ 64 <1968000000>;
+			opp-level = <6>;
+			clock-latency-ns = <31000>;
+		};
+		opp07 {
+			opp-hz = /bits/ 64 <2208000000>;
+			opp-level = <7>;
+			clock-latency-ns = <33000>;
+		};
+		opp08 {
+			opp-hz = /bits/ 64 <2400000000>;
+			opp-level = <8>;
+			clock-latency-ns = <45000>;
+		};
+		opp09 {
+			opp-hz = /bits/ 64 <2568000000>;
+			opp-level = <9>;
+			clock-latency-ns = <47000>;
+		};
+		opp10 {
+			opp-hz = /bits/ 64 <2724000000>;
+			opp-level = <10>;
+			clock-latency-ns = <50000>;
+		};
+		opp11 {
+			opp-hz = /bits/ 64 <2868000000>;
+			opp-level = <11>;
+			clock-latency-ns = <52000>;
+		};
+		opp12 {
+			opp-hz = /bits/ 64 <3000000000>;
+			opp-level = <12>;
+			clock-latency-ns = <57000>;
+		};
+		opp13 {
+			opp-hz = /bits/ 64 <3132000000>;
+			opp-level = <13>;
+			clock-latency-ns = <60000>;
+		};
+		opp14 {
+			opp-hz = /bits/ 64 <3264000000>;
+			opp-level = <14>;
+			clock-latency-ns = <64000>;
+		};
+		opp15 {
+			opp-hz = /bits/ 64 <3360000000>;
+			opp-level = <15>;
+			clock-latency-ns = <64000>;
+			turbo-mode;
+		};
+		opp16 {
+			opp-hz = /bits/ 64 <3408000000>;
+			opp-level = <16>;
+			clock-latency-ns = <64000>;
+			turbo-mode;
+		};
+		opp17 {
+			opp-hz = /bits/ 64 <3504000000>;
+			opp-level = <17>;
+			clock-latency-ns = <64000>;
+			turbo-mode;
+		};
+	};
+
+	pmu-e {
+		compatible = "apple,blizzard-pmu";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_FIQ 0 AIC_CPU_PMU_E IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	pmu-p {
+		compatible = "apple,avalanche-pmu";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_FIQ 0 AIC_CPU_PMU_P IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupt-parent = <&aic>;
+		interrupt-names = "phys", "virt", "hyp-phys", "hyp-virt";
+		interrupts = <AIC_FIQ 0 AIC_TMR_GUEST_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ 0 AIC_TMR_GUEST_VIRT IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ 0 AIC_TMR_HV_PHYS IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_FIQ 0 AIC_TMR_HV_VIRT IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	clkref: clock-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "clkref";
+	};
+
+	clk_200m: clock-200m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <200000000>;
+		clock-output-names = "clk_200m";
+	};
+
+	/*
+	 * This is a fabulated representation of the input clock
+	 * to NCO since we don't know the true clock tree.
+	 */
+	nco_clkref: clock-ref-nco {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "nco_ref";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		gpu_globals: globals {
+			status = "disabled";
+		};
+
+		gpu_hw_cal_a: hw-cal-a {
+			status = "disabled";
+		};
+
+		gpu_hw_cal_b: hw-cal-b {
+			status = "disabled";
+		};
+
+		uat_handoff: uat-handoff {
+			status = "disabled";
+		};
+
+		uat_pagetables: uat-pagetables {
+			status = "disabled";
+		};
+
+		uat_ttbs: uat-ttbs {
+			status = "disabled";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t602x-die0.dtsi b/arch/arm64/boot/dts/apple/t602x-die0.dtsi
new file mode 100644
index 000000000000..2e7d2bf08ddc
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t602x-die0.dtsi
@@ -0,0 +1,575 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Devices used on die 0 on the Apple T6022 "M2 Ultra" SoC and present on
+ * Apple T6020 / T6021 "M2 Pro" / "M2 Max".
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+	nco: clock-controller@28e03c000 {
+		compatible = "apple,t6020-nco", "apple,t8103-nco";
+		reg = <0x2 0x8e03c000 0x0 0x14000>;
+		clocks = <&nco_clkref>;
+		#clock-cells = <1>;
+	};
+
+	aic: interrupt-controller@28e100000 {
+		compatible = "apple,t6020-aic", "apple,aic2";
+		#interrupt-cells = <4>;
+		interrupt-controller;
+		reg = <0x2 0x8e100000 0x0 0xc000>,
+			<0x2 0x8e10c000 0x0 0x1000>;
+		reg-names = "core", "event";
+		power-domains = <&ps_aic>;
+	};
+
+	nub_spmi0: spmi@29e114000 {
+		compatible = "apple,t6020-spmi", "apple,t8103-spmi";
+		reg = <0x2 0x9e114000 0x0 0x100>;
+		#address-cells = <2>;
+		#size-cells = <0>;
+
+		pmic1: pmic@f {
+			compatible = "apple,maverick-pmic", "apple,spmi-nvmem";
+			reg = <0xb SPMI_USID>;
+
+			nvmem-layout {
+				compatible = "fixed-layout";
+				#address-cells = <1>;
+				#size-cells = <1>;
+
+				pm_setting: pm-setting@1405 {
+					reg = <0x1405 0x1>;
+				};
+
+				rtc_offset: rtc-offset@1411 {
+					reg = <0x1411 0x6>;
+				};
+
+				boot_stage: boot-stage@6001 {
+					reg = <0x6001 0x1>;
+				};
+
+				boot_error_count: boot-error-count@6002,0 {
+					reg = <0x6002 0x1>;
+					bits = <0 4>;
+				};
+
+				panic_count: panic-count@6002,4 {
+					reg = <0x6002 0x1>;
+					bits = <4 4>;
+				};
+
+				boot_error_stage: boot-error-stage@6003 {
+					reg = <0x6003 0x1>;
+				};
+
+				shutdown_flag: shutdown-flag@600f,3 {
+					reg = <0x600f 0x1>;
+					bits = <3 1>;
+				};
+
+				fault_shadow: fault-shadow@867b {
+					reg = <0x867b 0x10>;
+				};
+
+				socd: socd@8b00 {
+					reg = <0x8b00 0x400>;
+				};
+			};
+		};
+	};
+
+	wdt: watchdog@29e2c4000 {
+		compatible = "apple,t6020-wdt", "apple,t8103-wdt";
+		reg = <0x2 0x9e2c4000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 719 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	smc_mbox: mbox@2a2408000 {
+		compatible = "apple,t6020-asc-mailbox", "apple,asc-mailbox-v4";
+		reg = <0x2 0xa2408000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 862 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 863 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 864 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 865 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "send-empty", "send-not-empty",
+			"recv-empty", "recv-not-empty";
+		#mbox-cells = <0>;
+	};
+
+	smc: smc@2a2400000 {
+		compatible = "apple,t6020-smc", "apple,t8103-smc";
+		reg = <0x2 0xa2400000 0x0 0x4000>,
+			<0x2 0xa3e00000 0x0 0x100000>;
+		reg-names = "smc", "sram";
+		mboxes = <&smc_mbox>;
+
+		smc_gpio: gpio {
+			compatible = "apple,smc-gpio";
+			gpio-controller;
+			#gpio-cells = <2>;
+		};
+
+		smc_reboot: reboot {
+			compatible = "apple,smc-reboot";
+			nvmem-cells = <&shutdown_flag>, <&boot_stage>,
+				<&boot_error_count>, <&panic_count>;
+			nvmem-cell-names = "shutdown_flag", "boot_stage",
+				"boot_error_count", "panic_count";
+		};
+	};
+
+	pinctrl_smc: pinctrl@2a2820000 {
+		compatible = "apple,t6020-pinctrl", "apple,t8103-pinctrl";
+		reg = <0x2 0xa2820000 0x0 0x4000>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&pinctrl_smc 0 0 30>;
+		apple,npins = <30>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 851 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 852 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 853 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 854 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 855 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 856 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 857 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	sio_dart: iommu@39b008000 {
+		compatible = "apple,t6020-dart", "apple,t8110-dart";
+		reg = <0x3 0x9b008000 0x0 0x8000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1231 IRQ_TYPE_LEVEL_HIGH>;
+		#iommu-cells = <1>;
+		power-domains = <&ps_sio_cpu>;
+	};
+
+	fpwm0: pwm@39b030000 {
+		compatible = "apple,t6020-fpwm", "apple,s5l-fpwm";
+		reg = <0x3 0x9b030000 0x0 0x4000>;
+		power-domains = <&ps_fpwm0>;
+		clocks = <&clkref>;
+		#pwm-cells = <2>;
+		status = "disabled";
+	};
+
+	i2c0: i2c@39b040000 {
+		compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+		reg = <0x3 0x9b040000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1219 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c0_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c0>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+	};
+
+	i2c1: i2c@39b044000 {
+		compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+		reg = <0x3 0x9b044000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1220 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c1_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c1>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@39b048000 {
+		compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+		reg = <0x3 0x9b048000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1221 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c2_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c2>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c3: i2c@39b04c000 {
+		compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+		reg = <0x3 0x9b04c000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1222 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c3_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c3>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c4: i2c@39b050000 {
+		compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+		reg = <0x3 0x9b050000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1223 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c4_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c4>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c5: i2c@39b054000 {
+		compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+		reg = <0x3 0x9b054000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1224 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c5_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c5>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c6: i2c@39b054000 {
+		compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+		reg = <0x3 0x9b054000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1225 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c6_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c6>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c7: i2c@39b054000 {
+		compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+		reg = <0x3 0x9b054000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1226 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c7_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c7>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	i2c8: i2c@39b054000 {
+		compatible = "apple,t6020-i2c", "apple,t8103-i2c";
+		reg = <0x3 0x9b054000 0x0 0x4000>;
+		clocks = <&clkref>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1227 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&i2c8_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_i2c8>;
+		#address-cells = <0x1>;
+		#size-cells = <0x0>;
+		status = "disabled";
+	};
+
+	spi1: spi@39b104000 {
+		compatible = "apple,t6020-spi", "apple,t8103-spi";
+		reg = <0x3 0x9b104000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1206 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clk_200m>;
+		pinctrl-0 = <&spi1_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_spi1>;
+		status = "disabled";
+	};
+
+	spi2: spi@39b108000 {
+		compatible = "apple,t6020-spi", "apple,t8103-spi";
+		reg = <0x3 0x9b108000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1207 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clkref>;
+		pinctrl-0 = <&spi2_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_spi2>;
+		status = "disabled";
+	};
+
+	spi4: spi@39b110000 {
+		compatible = "apple,t6020-spi", "apple,t8103-spi";
+		reg = <0x3 0x9b110000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1209 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&clkref>;
+		pinctrl-0 = <&spi4_pins>;
+		pinctrl-names = "default";
+		power-domains = <&ps_spi4>;
+		status = "disabled";
+	};
+
+	serial0: serial@39b200000 {
+		compatible = "apple,s5l-uart";
+		reg = <0x3 0x9b200000 0x0 0x4000>;
+		reg-io-width = <4>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1198 IRQ_TYPE_LEVEL_HIGH>;
+		/*
+		 * TODO: figure out the clocking properly, there may
+		 * be a third selectable clock.
+		 */
+		clocks = <&clkref>, <&clkref>;
+		clock-names = "uart", "clk_uart_baud0";
+		power-domains = <&ps_uart0>;
+		status = "disabled";
+	};
+
+	admac: dma-controller@39b400000 {
+		compatible = "apple,t6020-admac", "apple,t8103-admac";
+		reg = <0x3 0x9b400000 0x0 0x34000>;
+		#dma-cells = <1>;
+		dma-channels = <16>;
+		interrupts-extended = <0>,
+				      <&aic AIC_IRQ 0 1218 IRQ_TYPE_LEVEL_HIGH>,
+				      <0>,
+				      <0>;
+		iommus = <&sio_dart 2>;
+		power-domains = <&ps_sio_adma>;
+		resets = <&ps_audio_p>;
+	};
+
+	mca: mca@39b600000 {
+		compatible = "apple,t6020-mca", "apple,t8103-mca";
+		reg = <0x3 0x9b600000 0x0 0x10000>,
+		      <0x3 0x9b500000 0x0 0x20000>;
+		clocks = <&nco 0>, <&nco 1>, <&nco 2>, <&nco 3>;
+		dmas = <&admac 0>, <&admac 1>, <&admac 2>, <&admac 3>,
+		       <&admac 4>, <&admac 5>, <&admac 6>, <&admac 7>,
+		       <&admac 8>, <&admac 9>, <&admac 10>, <&admac 11>,
+		       <&admac 12>, <&admac 13>, <&admac 14>, <&admac 15>;
+		dma-names = "tx0a", "rx0a", "tx0b", "rx0b",
+			    "tx1a", "rx1a", "tx1b", "rx1b",
+			    "tx2a", "rx2a", "tx2b", "rx2b",
+			    "tx3a", "rx3a", "tx3b", "rx3b";
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1211 IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_IRQ 0 1212 IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_IRQ 0 1213 IRQ_TYPE_LEVEL_HIGH>,
+			     <AIC_IRQ 0 1214 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_audio_p>, <&ps_mca0>, <&ps_mca1>,
+				<&ps_mca2>, <&ps_mca3>;
+		resets = <&ps_audio_p>;
+		#sound-dai-cells = <1>;
+	};
+
+	gpu: gpu@406400000 {
+		compatible = "apple,agx-g14s";
+		reg = <0x4 0x6400000 0 0x40000>,
+			<0x4 0x4000000 0 0x1000000>;
+		reg-names = "asc", "sgx";
+		mboxes = <&agx_mbox>;
+		power-domains = <&ps_gfx>;
+		memory-region = <&uat_ttbs>, <&uat_pagetables>, <&uat_handoff>,
+				<&gpu_hw_cal_a>, <&gpu_hw_cal_b>, <&gpu_globals>;
+		memory-region-names = "ttbs", "pagetables", "handoff",
+				      "hw-cal-a", "hw-cal-b", "globals";
+
+		apple,firmware-abi = <0 0 0>;
+	};
+
+	agx_mbox: mbox@406408000 {
+		compatible = "apple,t6020-asc-mailbox", "apple,asc-mailbox-v4";
+		reg = <0x4 0x6408000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1143 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 1144 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 1145 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ 0 1146 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "send-empty", "send-not-empty",
+			"recv-empty", "recv-not-empty";
+		#mbox-cells = <0>;
+	};
+
+	pcie0: pcie@580000000 {
+		compatible = "apple,t6020-pcie";
+		device_type = "pci";
+
+		reg = <0x5 0x80000000 0x0 0x1000000>,	/* config */
+			<0x5 0x91000000 0x0 0x4000>,	/* rc */
+			<0x5 0x94008000 0x0 0x4000>,	/* port0 */
+			<0x5 0x95008000 0x0 0x4000>,	/* port1 */
+			<0x5 0x96008000 0x0 0x4000>,	/* port2 */
+			<0x5 0x97008000 0x0 0x4000>,	/* port3 */
+			<0x5 0x9e00c000 0x0 0x4000>,	/* phy0 */
+			<0x5 0x9e010000 0x0 0x4000>,	/* phy1 */
+			<0x5 0x9e014000 0x0 0x4000>,	/* phy2 */
+			<0x5 0x9e018000 0x0 0x4000>;	/* phy3 */
+		reg-names = "config", "rc",
+			"port0", "port1", "port2", "port3",
+			"phy0", "phy1", "phy2", "phy3";
+
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1340 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 1344 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 1348 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 0 1352 IRQ_TYPE_LEVEL_HIGH>;
+
+		msi-controller;
+		msi-parent = <&pcie0>;
+		msi-ranges = <&aic AIC_IRQ 0 1672 IRQ_TYPE_EDGE_RISING 32>;
+
+		iommu-map = <0x100 &pcie0_dart_0 1 1>,
+				<0x200 &pcie0_dart_1 1 1>,
+				<0x300 &pcie0_dart_2 1 1>,
+				<0x400 &pcie0_dart_3 1 1>;
+		iommu-map-mask = <0xff00>;
+
+		bus-range = <0 4>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges = <0x43000000 0x5 0xa0000000 0x5 0xa0000000 0x0 0x20000000>,
+				<0x02000000 0x0 0xc0000000 0x5 0xc0000000 0x0 0x40000000>;
+
+		power-domains = <&ps_apcie_gp_sys>;
+		pinctrl-0 = <&pcie_pins>;
+		pinctrl-names = "default";
+
+		port00: pci@0,0 {
+			device_type = "pci";
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			reset-gpios = <&pinctrl_ap 4 GPIO_ACTIVE_LOW>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &port00 0 0 0 0>,
+					<0 0 0 2 &port00 0 0 0 1>,
+					<0 0 0 3 &port00 0 0 0 2>,
+					<0 0 0 4 &port00 0 0 0 3>;
+		};
+
+		port01: pci@1,0 {
+			device_type = "pci";
+			reg = <0x800 0x0 0x0 0x0 0x0>;
+			reset-gpios = <&pinctrl_ap 5 GPIO_ACTIVE_LOW>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &port01 0 0 0 0>,
+					<0 0 0 2 &port01 0 0 0 1>,
+					<0 0 0 3 &port01 0 0 0 2>,
+					<0 0 0 4 &port01 0 0 0 3>;
+			status = "disabled";
+		};
+
+		port02: pci@2,0 {
+			device_type = "pci";
+			reg = <0x1000 0x0 0x0 0x0 0x0>;
+			reset-gpios = <&pinctrl_ap 6 GPIO_ACTIVE_LOW>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &port02 0 0 0 0>,
+					<0 0 0 2 &port02 0 0 0 1>,
+					<0 0 0 3 &port02 0 0 0 2>,
+					<0 0 0 4 &port02 0 0 0 3>;
+			status = "disabled";
+		};
+
+		port03: pci@3,0 {
+			device_type = "pci";
+			reg = <0x1800 0x0 0x0 0x0 0x0>;
+			reset-gpios = <&pinctrl_ap 7 GPIO_ACTIVE_LOW>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges;
+
+			interrupt-controller;
+			#interrupt-cells = <1>;
+
+			interrupt-map-mask = <0 0 0 7>;
+			interrupt-map = <0 0 0 1 &port03 0 0 0 0>,
+					<0 0 0 2 &port03 0 0 0 1>,
+					<0 0 0 3 &port03 0 0 0 2>,
+					<0 0 0 4 &port03 0 0 0 3>;
+			status = "disabled";
+		};
+	};
+
+	pcie0_dart_0: iommu@594000000 {
+		compatible = "apple,t6020-dart", "apple,t8110-dart";
+		reg = <0x5 0x94000000 0x0 0x4000>;
+		#iommu-cells = <1>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1341 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_apcie_gp_sys>;
+	};
+
+	pcie0_dart_1: iommu@595000000 {
+		compatible = "apple,t6020-dart", "apple,t8110-dart";
+		reg = <0x5 0x95000000 0x0 0x4000>;
+		#iommu-cells = <1>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1345 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_apcie_gp_sys>;
+		status = "disabled";
+	};
+
+	pcie0_dart_2: iommu@596000000 {
+		compatible = "apple,t6020-dart", "apple,t8110-dart";
+		reg = <0x5 0x96000000 0x0 0x4000>;
+		#iommu-cells = <1>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1349 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_apcie_gp_sys>;
+		status = "disabled";
+	};
+
+	pcie0_dart_3: iommu@597000000 {
+		compatible = "apple,t6020-dart", "apple,t8110-dart";
+		reg = <0x5 0x97000000 0x0 0x4000>;
+		#iommu-cells = <1>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ 0 1353 IRQ_TYPE_LEVEL_HIGH>;
+		power-domains = <&ps_apcie_gp_sys>;
+		status = "disabled";
+	};
diff --git a/arch/arm64/boot/dts/apple/t602x-dieX.dtsi b/arch/arm64/boot/dts/apple/t602x-dieX.dtsi
new file mode 100644
index 000000000000..cb07fd82b32e
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t602x-dieX.dtsi
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Nodes present on both dies of T6022 (M2 Ultra) and present on M2 Pro/Max.
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+	DIE_NODE(cpufreq_e): cpufreq@210e20000 {
+		compatible = "apple,t6020-cluster-cpufreq", "apple,t8112-cluster-cpufreq";
+		reg = <0x2 0x10e20000 0 0x1000>;
+		#performance-domain-cells = <0>;
+	};
+
+	DIE_NODE(cpufreq_p0): cpufreq@211e20000 {
+		compatible = "apple,t6020-cluster-cpufreq", "apple,t8112-cluster-cpufreq";
+		reg = <0x2 0x11e20000 0 0x1000>;
+		#performance-domain-cells = <0>;
+	};
+
+	DIE_NODE(cpufreq_p1): cpufreq@212e20000 {
+		compatible = "apple,t6020-cluster-cpufreq", "apple,t8112-cluster-cpufreq";
+		reg = <0x2 0x12e20000 0 0x1000>;
+		#performance-domain-cells = <0>;
+	};
+
+	DIE_NODE(pmgr): power-management@28e080000 {
+		compatible = "apple,t6020-pmgr", "apple,t8103-pmgr", "syscon", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2 0x8e080000 0 0x8000>;
+	};
+
+	DIE_NODE(pmgr_south): power-management@28e680000 {
+		compatible = "apple,t6020-pmgr", "apple,t8103-pmgr", "syscon", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2 0x8e680000 0 0x8000>;
+	};
+
+	DIE_NODE(pmgr_east): power-management@290280000 {
+		compatible = "apple,t6020-pmgr", "apple,t8103-pmgr", "syscon", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2 0x90280000 0 0xc000>;
+	};
+
+	DIE_NODE(pinctrl_nub): pinctrl@29e1f0000 {
+		compatible = "apple,t6020-pinctrl", "apple,t8103-pinctrl";
+		reg = <0x2 0x9e1f0000 0x0 0x4000>;
+		power-domains = <&DIE_NODE(ps_nub_gpio)>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&DIE_NODE(pinctrl_nub) 0 0 30>;
+		apple,npins = <30>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ DIE_NO 711 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 712 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 713 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 714 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 715 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 716 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 717 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	DIE_NODE(pmgr_mini): power-management@29e280000 {
+		compatible = "apple,t6020-pmgr", "apple,t8103-pmgr", "syscon", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		reg = <0x2 0x9e280000 0 0x4000>;
+	};
+
+	DIE_NODE(pinctrl_aop): pinctrl@2a6820000 {
+		compatible = "apple,t6020-pinctrl", "apple,t8103-pinctrl";
+		reg = <0x2 0xa6820000 0x0 0x4000>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&DIE_NODE(pinctrl_aop) 0 0 72>;
+		apple,npins = <72>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ DIE_NO 598 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 599 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 600 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 601 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 602 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 603 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 604 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	DIE_NODE(pinctrl_ap): pinctrl@39b028000 {
+		compatible = "apple,t6020-pinctrl", "apple,t8103-pinctrl";
+		reg = <0x3 0x9b028000 0x0 0x4000>;
+
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ DIE_NO 458 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 459 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 460 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 461 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 462 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 463 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ DIE_NO 464 IRQ_TYPE_LEVEL_HIGH>;
+
+		clocks = <&clkref>;
+		power-domains = <&DIE_NODE(ps_gpio)>;
+
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-ranges = <&DIE_NODE(pinctrl_ap) 0 0 255>;
+		apple,npins = <255>;
+
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	DIE_NODE(pmgr_gfx): power-management@404e80000 {
+		compatible = "apple,t6020-pmgr", "apple,t8103-pmgr", "syscon", "simple-mfd";
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		reg = <0x4 0x4e80000 0 0x4000>;
+	};
diff --git a/arch/arm64/boot/dts/apple/t602x-gpio-pins.dtsi b/arch/arm64/boot/dts/apple/t602x-gpio-pins.dtsi
new file mode 100644
index 000000000000..e41b6475f792
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t602x-gpio-pins.dtsi
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * GPIO pin mappings for Apple T602x SoCs.
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+&pinctrl_ap {
+	i2c0_pins: i2c0-pins {
+		pinmux = <APPLE_PINMUX(63, 1)>,
+			<APPLE_PINMUX(64, 1)>;
+	};
+
+	i2c1_pins: i2c1-pins {
+		pinmux = <APPLE_PINMUX(65, 1)>,
+			<APPLE_PINMUX(66, 1)>;
+	};
+
+	i2c2_pins: i2c2-pins {
+		pinmux = <APPLE_PINMUX(67, 1)>,
+			<APPLE_PINMUX(68, 1)>;
+	};
+
+	i2c3_pins: i2c3-pins {
+		pinmux = <APPLE_PINMUX(69, 1)>,
+			<APPLE_PINMUX(70, 1)>;
+	};
+
+	i2c4_pins: i2c4-pins {
+		pinmux = <APPLE_PINMUX(71, 1)>,
+			<APPLE_PINMUX(72, 1)>;
+	};
+
+	i2c5_pins: i2c5-pins {
+		pinmux = <APPLE_PINMUX(73, 1)>,
+			<APPLE_PINMUX(74, 1)>;
+	};
+
+	i2c6_pins: i2c6-pins {
+		pinmux = <APPLE_PINMUX(75, 1)>,
+			<APPLE_PINMUX(76, 1)>;
+	};
+
+	i2c7_pins: i2c7-pins {
+		pinmux = <APPLE_PINMUX(77, 1)>,
+			<APPLE_PINMUX(78, 1)>;
+	};
+
+	i2c8_pins: i2c8-pins {
+		pinmux = <APPLE_PINMUX(79, 1)>,
+			<APPLE_PINMUX(80, 1)>;
+	};
+
+	spi1_pins: spi1-pins {
+		pinmux = <APPLE_PINMUX(155, 1)>, /* SDI */
+			<APPLE_PINMUX(156, 1)>,  /* SDO */
+			<APPLE_PINMUX(157, 1)>,  /* SCK */
+			<APPLE_PINMUX(158, 1)>;  /* CS */
+	};
+
+	spi2_pins: spi2-pins {
+		pinmux = <APPLE_PINMUX(159, 1)>, /* SDI */
+			<APPLE_PINMUX(160, 1)>,  /* SDO */
+			<APPLE_PINMUX(161, 1)>,  /* SCK */
+			<APPLE_PINMUX(162, 1)>;  /* CS */
+	};
+
+	spi4_pins: spi4-pins {
+		pinmux = <APPLE_PINMUX(167, 1)>, /* SDI */
+			<APPLE_PINMUX(168, 1)>,  /* SDO */
+			<APPLE_PINMUX(169, 1)>,  /* SCK */
+			<APPLE_PINMUX(170, 1)>;  /* CS */
+	};
+
+	pcie_pins: pcie-pins {
+		pinmux = <APPLE_PINMUX(0, 1)>,
+				<APPLE_PINMUX(1, 1)>,
+				<APPLE_PINMUX(2, 1)>,
+				<APPLE_PINMUX(3, 1)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t602x-j414-j416.dtsi b/arch/arm64/boot/dts/apple/t602x-j414-j416.dtsi
new file mode 100644
index 000000000000..0e806d8ddf81
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t602x-j414-j416.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * MacBook Pro (14/16-inch, 2022)
+ *
+ * This file contains the parts common to J414 and J416 devices with both t6020 and t6021.
+ *
+ * target-type: J414s / J414c / J416s / J416c
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/*
+ * These models are essentially identical to the previous generation, other than
+ * the GPIO indices.
+ */
+
+#include "t600x-j314-j316.dtsi"
+
+&framebuffer0 {
+	power-domains = <&ps_disp0_cpu0>, <&ps_dptx_phy_ps>;
+};
+
+&hpm0 {
+	interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&hpm1 {
+	interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&hpm2 {
+	interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&hpm5 {
+	interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&wifi0 {
+	compatible = "pci14e4,4434";
+};
+
+&bluetooth0 {
+	compatible = "pci14e4,5f72";
+};
diff --git a/arch/arm64/boot/dts/apple/t602x-j474-j475.dtsi b/arch/arm64/boot/dts/apple/t602x-j474-j475.dtsi
new file mode 100644
index 000000000000..ee12fea5b12c
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t602x-j474-j475.dtsi
@@ -0,0 +1,38 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Mac mini (M2 Pro, 2023) and Mac Studio (2023)
+ *
+ * This file contains the parts common to J474 and J475 devices with t6020,
+ * t6021 and t6022.
+ *
+ * target-type: J474s / J475c / J475d
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/*
+ * These models are very similar to the previous generation Mac Studio, other
+ * than GPIO indices.
+ */
+
+#include "t600x-j375.dtsi"
+
+&framebuffer0 {
+	power-domains = <&ps_dispext0_cpu0>, <&ps_dptx_phy_ps>;
+};
+
+&hpm0 {
+	interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&hpm1 {
+	interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&hpm2 {
+	interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&hpm3  {
+	interrupts = <44 IRQ_TYPE_LEVEL_LOW>;
+};
diff --git a/arch/arm64/boot/dts/apple/t602x-nvme.dtsi b/arch/arm64/boot/dts/apple/t602x-nvme.dtsi
new file mode 100644
index 000000000000..590cec8ac804
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t602x-nvme.dtsi
@@ -0,0 +1,42 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * NVMe related devices for Apple T602x SoCs.
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+	DIE_NODE(ans_mbox): mbox@347408000 {
+		compatible = "apple,t6020-asc-mailbox", "apple,asc-mailbox-v4";
+		reg = <0x3 0x47408000 0x0 0x4000>;
+		interrupt-parent = <&aic>;
+		interrupts = <AIC_IRQ DIE_NO 1169 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ DIE_NO 1170 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ DIE_NO 1171 IRQ_TYPE_LEVEL_HIGH>,
+			<AIC_IRQ DIE_NO 1172 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "send-empty", "send-not-empty",
+			"recv-empty", "recv-not-empty";
+		power-domains = <&DIE_NODE(ps_ans2)>;
+		#mbox-cells = <0>;
+	};
+
+	DIE_NODE(sart): sart@34bc50000 {
+		compatible = "apple,t6020-sart", "apple,t6000-sart";
+		reg = <0x3 0x4bc50000 0x0 0x10000>;
+		power-domains = <&DIE_NODE(ps_ans2)>;
+	};
+
+	DIE_NODE(nvme): nvme@34bcc0000 {
+		compatible = "apple,t6020-nvme-ans2", "apple,t8103-nvme-ans2";
+		reg = <0x3 0x4bcc0000 0x0 0x40000>, <0x3 0x47400000 0x0 0x4000>;
+		reg-names = "nvme", "ans";
+		interrupt-parent = <&aic>;
+		/* The NVME interrupt is always routed to die 0 */
+		interrupts = <AIC_IRQ 0 1832 IRQ_TYPE_LEVEL_HIGH>;
+		mboxes = <&DIE_NODE(ans_mbox)>;
+		apple,sart = <&DIE_NODE(sart)>;
+		power-domains = <&DIE_NODE(ps_ans2)>,
+			<&DIE_NODE(ps_apcie_st_sys)>,
+			<&DIE_NODE(ps_apcie_st1_sys)>;
+		power-domain-names = "ans", "apcie0", "apcie1";
+		resets = <&DIE_NODE(ps_ans2)>;
+	};
diff --git a/arch/arm64/boot/dts/apple/t602x-pmgr.dtsi b/arch/arm64/boot/dts/apple/t602x-pmgr.dtsi
new file mode 100644
index 000000000000..f5382a2faf0b
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t602x-pmgr.dtsi
@@ -0,0 +1,2265 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * PMGR Power domains for Apple T602x "M2 Pro/Max/Ultra" SoC
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+&DIE_NODE(pmgr) {
+	DIE_NODE(ps_afi): power-controller@100 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afi);
+		apple,always-on; /* Apple Fabric, CPU interface is here */
+	};
+
+	DIE_NODE(ps_aic): power-controller@108 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(aic);
+		apple,always-on; /* Core device */
+	};
+
+	DIE_NODE(ps_dwi): power-controller@110 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dwi);
+	};
+
+	DIE_NODE(ps_pms): power-controller@118 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pms);
+		apple,always-on; /* Core device */
+	};
+
+	DIE_NODE(ps_gpio): power-controller@120 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(gpio);
+		power-domains = <&DIE_NODE(ps_sio)>, <&DIE_NODE(ps_pms)>;
+	};
+
+	DIE_NODE(ps_soc_dpe): power-controller@128 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(soc_dpe);
+		apple,always-on; /* Core device */
+	};
+
+	DIE_NODE(ps_pms_c1ppt): power-controller@130 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pms_c1ppt);
+		apple,always-on; /* Core device */
+	};
+
+	DIE_NODE(ps_pmgr_soc_ocla): power-controller@138 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pmgr_soc_ocla);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_amcc0): power-controller@168 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc0);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_amcc2): power-controller@170 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc2);
+		apple,always-on; /* Memory controller */
+	};
+
+	DIE_NODE(ps_dcs_00): power-controller@178 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_00);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_01): power-controller@180 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_01);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_02): power-controller@188 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_02);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_03): power-controller@190 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_03);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_08): power-controller@198 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_08);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_09): power-controller@1a0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_09);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_10): power-controller@1a8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_10);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_11): power-controller@1b0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_11);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_afnc1_ioa): power-controller@1b8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afc): power-controller@1d0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afc);
+		apple,always-on; /* Apple Fabric, CPU interface is here */
+	};
+
+	DIE_NODE(ps_afnc0_ioa): power-controller@1e8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc0_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc1_ls): power-controller@1f0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc1_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc0_ls): power-controller@1f8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc0_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc0_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc1_lw0): power-controller@200 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc1_ls)>;
+	};
+
+	DIE_NODE(ps_afnc1_lw1): power-controller@208 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_lw1);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc1_ls)>;
+	};
+
+	DIE_NODE(ps_afnc1_lw2): power-controller@210 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc1_lw2);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc1_ls)>;
+	};
+
+	DIE_NODE(ps_afnc0_lw0): power-controller@218 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc0_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc0_ls)>;
+	};
+
+	DIE_NODE(ps_scodec): power-controller@220 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(scodec);
+		power-domains = <&DIE_NODE(ps_afnc1_lw0)>;
+	};
+
+	DIE_NODE(ps_atc0_common): power-controller@228 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_common);
+		power-domains = <&DIE_NODE(ps_afnc1_lw1)>;
+	};
+
+	DIE_NODE(ps_atc1_common): power-controller@230 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_common);
+		power-domains = <&DIE_NODE(ps_afnc1_lw1)>;
+	};
+
+	DIE_NODE(ps_atc2_common): power-controller@238 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_common);
+		power-domains = <&DIE_NODE(ps_afnc1_lw1)>;
+	};
+
+	DIE_NODE(ps_atc3_common): power-controller@240 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_common);
+		power-domains = <&DIE_NODE(ps_afnc1_lw1)>;
+	};
+
+	DIE_NODE(ps_dispext1_sys): power-controller@248 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext1_sys);
+		power-domains = <&DIE_NODE(ps_afnc1_lw2)>;
+	};
+
+	DIE_NODE(ps_pms_bridge): power-controller@250 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pms_bridge);
+		apple,always-on; /* Core device */
+		power-domains = <&DIE_NODE(ps_afnc0_lw0)>;
+	};
+
+	DIE_NODE(ps_dispext0_sys): power-controller@258 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext0_sys);
+		power-domains = <&DIE_NODE(ps_afnc0_lw0)>, <&DIE_NODE(ps_afr)>;
+	};
+
+	DIE_NODE(ps_ane_sys): power-controller@260 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_sys);
+		power-domains = <&DIE_NODE(ps_afnc0_lw0)>;
+	};
+
+	DIE_NODE(ps_avd_sys): power-controller@268 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(avd_sys);
+		power-domains = <&DIE_NODE(ps_afnc0_lw0)>;
+	};
+
+	DIE_NODE(ps_atc0_cio): power-controller@270 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_cio);
+		power-domains = <&DIE_NODE(ps_atc0_common)>;
+	};
+
+	DIE_NODE(ps_atc0_pcie): power-controller@278 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_pcie);
+		power-domains = <&DIE_NODE(ps_atc0_common)>;
+	};
+
+	DIE_NODE(ps_atc1_cio): power-controller@280 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_cio);
+		power-domains = <&DIE_NODE(ps_atc1_common)>;
+	};
+
+	DIE_NODE(ps_atc1_pcie): power-controller@288 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_pcie);
+		power-domains = <&DIE_NODE(ps_atc1_common)>;
+	};
+
+	DIE_NODE(ps_atc2_cio): power-controller@290 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x290 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_cio);
+		power-domains = <&DIE_NODE(ps_atc2_common)>;
+	};
+
+	DIE_NODE(ps_atc2_pcie): power-controller@298 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x298 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_pcie);
+		power-domains = <&DIE_NODE(ps_atc2_common)>;
+	};
+
+	DIE_NODE(ps_atc3_cio): power-controller@2a0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_cio);
+		power-domains = <&DIE_NODE(ps_atc3_common)>;
+	};
+
+	DIE_NODE(ps_atc3_pcie): power-controller@2a8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_pcie);
+		power-domains = <&DIE_NODE(ps_atc3_common)>;
+	};
+
+	DIE_NODE(ps_dispext1_fe): power-controller@2b0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext1_fe);
+		power-domains = <&DIE_NODE(ps_dispext1_sys)>;
+	};
+
+	DIE_NODE(ps_dispext1_cpu0): power-controller@2b8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext1_cpu0);
+		power-domains = <&DIE_NODE(ps_dispext1_fe)>;
+		apple,min-state = <4>;
+	};
+
+	DIE_NODE(ps_dispext0_fe): power-controller@2c0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext0_fe);
+		power-domains = <&DIE_NODE(ps_dispext0_sys)>;
+	};
+
+	DIE_NODE(ps_pmp): power-controller@2c8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pmp);
+	};
+
+	DIE_NODE(ps_pms_sram): power-controller@2d0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(pms_sram);
+	};
+
+	DIE_NODE(ps_dispext0_cpu0): power-controller@2d8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext0_cpu0);
+		power-domains = <&DIE_NODE(ps_dispext0_fe)>;
+		apple,min-state = <4>;
+	};
+
+	DIE_NODE(ps_ane_cpu): power-controller@2e0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_cpu);
+		power-domains = <&DIE_NODE(ps_ane_sys)>;
+	};
+
+	DIE_NODE(ps_atc0_cio_pcie): power-controller@2e8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_cio_pcie);
+		power-domains = <&DIE_NODE(ps_atc0_cio)>;
+	};
+
+	DIE_NODE(ps_atc0_cio_usb): power-controller@2f0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_cio_usb);
+		power-domains = <&DIE_NODE(ps_atc0_cio)>;
+	};
+
+	DIE_NODE(ps_atc1_cio_pcie): power-controller@2f8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_cio_pcie);
+		power-domains = <&DIE_NODE(ps_atc1_cio)>;
+	};
+
+	DIE_NODE(ps_atc1_cio_usb): power-controller@300 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_cio_usb);
+		power-domains = <&DIE_NODE(ps_atc1_cio)>;
+	};
+
+	DIE_NODE(ps_atc2_cio_pcie): power-controller@308 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_cio_pcie);
+		power-domains = <&DIE_NODE(ps_atc2_cio)>;
+	};
+
+	DIE_NODE(ps_atc2_cio_usb): power-controller@310 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_cio_usb);
+		power-domains = <&DIE_NODE(ps_atc2_cio)>;
+	};
+
+	DIE_NODE(ps_atc3_cio_pcie): power-controller@318 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_cio_pcie);
+		power-domains = <&DIE_NODE(ps_atc3_cio)>;
+	};
+
+	DIE_NODE(ps_atc3_cio_usb): power-controller@320 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_cio_usb);
+		power-domains = <&DIE_NODE(ps_atc3_cio)>;
+	};
+
+	DIE_NODE(ps_trace_fab): power-controller@390 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x390 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(trace_fab);
+	};
+
+	DIE_NODE(ps_ane_sys_mpm): power-controller@4000 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_sys_mpm);
+		power-domains = <&DIE_NODE(ps_ane_sys)>;
+	};
+
+	DIE_NODE(ps_ane_td): power-controller@4008 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_td);
+		power-domains = <&DIE_NODE(ps_ane_sys)>;
+	};
+
+	DIE_NODE(ps_ane_base): power-controller@4010 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_base);
+		power-domains = <&DIE_NODE(ps_ane_td)>;
+	};
+
+	DIE_NODE(ps_ane_set1): power-controller@4018 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_set1);
+		power-domains = <&DIE_NODE(ps_ane_base)>;
+	};
+
+	DIE_NODE(ps_ane_set2): power-controller@4020 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_set2);
+		power-domains = <&DIE_NODE(ps_ane_set1)>;
+	};
+
+	DIE_NODE(ps_ane_set3): power-controller@4028 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4028 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_set3);
+		power-domains = <&DIE_NODE(ps_ane_set2)>;
+	};
+
+	DIE_NODE(ps_ane_set4): power-controller@4030 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4030 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ane_set4);
+		power-domains = <&DIE_NODE(ps_ane_set3)>;
+	};
+};
+
+&DIE_NODE(pmgr_south) {
+	DIE_NODE(ps_amcc4): power-controller@100 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc4);
+		apple,always-on;
+	};
+
+	DIE_NODE(ps_amcc5): power-controller@108 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc5);
+		apple,always-on;
+	};
+
+	DIE_NODE(ps_amcc6): power-controller@110 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc6);
+		apple,always-on;
+	};
+
+	DIE_NODE(ps_amcc7): power-controller@118 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc7);
+		apple,always-on;
+	};
+
+	DIE_NODE(ps_dcs_16): power-controller@120 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_16);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_17): power-controller@128 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_17);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_18): power-controller@130 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_18);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_19): power-controller@138 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_19);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_20): power-controller@140 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_20);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_21): power-controller@148 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_21);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_22): power-controller@150 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_22);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_23): power-controller@158 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_23);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_24): power-controller@160 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_24);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_25): power-controller@168 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_25);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_26): power-controller@170 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_26);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_27): power-controller@178 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_27);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_28): power-controller@180 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_28);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_29): power-controller@188 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_29);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_30): power-controller@190 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_30);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_31): power-controller@198 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_31);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_afnc4_ioa): power-controller@1a0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc4_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc4_ls): power-controller@1a8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc4_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc4_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc4_lw0): power-controller@1b0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc4_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc4_ls)>;
+	};
+
+	DIE_NODE(ps_afnc5_ioa): power-controller@1b8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc5_ioa);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc5_ls): power-controller@1c0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc5_ls);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc5_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc5_lw0): power-controller@1c8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc5_lw0);
+		apple,always-on; /* Apple Fabric */
+		power-domains = <&DIE_NODE(ps_afnc5_ls)>;
+	};
+
+	DIE_NODE(ps_dispext2_sys): power-controller@1d0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext2_sys);
+	};
+
+	DIE_NODE(ps_msr1): power-controller@1d8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msr1);
+	};
+
+	DIE_NODE(ps_dispext2_fe): power-controller@1e0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext2_fe);
+		power-domains = <&DIE_NODE(ps_dispext2_sys)>;
+	};
+
+	DIE_NODE(ps_dispext2_cpu0): power-controller@1e8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext2_cpu0);
+		power-domains = <&DIE_NODE(ps_dispext2_fe)>;
+		apple,min-state = <4>;
+	};
+
+	DIE_NODE(ps_msr1_ase_core): power-controller@1f0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msr1_ase_core);
+		power-domains = <&DIE_NODE(ps_msr1)>;
+	};
+
+	DIE_NODE(ps_dispext3_sys): power-controller@220 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext3_sys);
+	};
+
+	DIE_NODE(ps_venc1_sys): power-controller@228 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_sys);
+	};
+
+	DIE_NODE(ps_dispext3_fe): power-controller@230 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext3_fe);
+		power-domains = <&DIE_NODE(ps_dispext3_sys)>;
+	};
+
+	DIE_NODE(ps_dispext3_cpu0): power-controller@238 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dispext3_cpu0);
+		power-domains = <&DIE_NODE(ps_dispext3_fe)>;
+		apple,min-state = <4>;
+	};
+
+	DIE_NODE(ps_venc1_dma): power-controller@4000 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_dma);
+		power-domains = <&DIE_NODE(ps_venc1_sys)>;
+	};
+
+	DIE_NODE(ps_venc1_pipe4): power-controller@4008 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_pipe4);
+		power-domains = <&DIE_NODE(ps_venc1_dma)>;
+	};
+
+	DIE_NODE(ps_venc1_pipe5): power-controller@4010 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_pipe5);
+		power-domains = <&DIE_NODE(ps_venc1_dma)>;
+	};
+
+	DIE_NODE(ps_venc1_me0): power-controller@4018 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_me0);
+		power-domains = <&DIE_NODE(ps_venc1_pipe5)>, <&DIE_NODE(ps_venc1_pipe4)>;
+	};
+
+	DIE_NODE(ps_venc1_me1): power-controller@4020 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc1_me1);
+		power-domains = <&DIE_NODE(ps_venc1_me0)>;
+	};
+};
+
+&DIE_NODE(pmgr_east) {
+	DIE_NODE(ps_clvr_spmi0): power-controller@100 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi0);
+		apple,always-on; /* PCPU voltage regulator interface (used by SMC) */
+	};
+
+	DIE_NODE(ps_clvr_spmi1): power-controller@108 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi1);
+		apple,always-on; /* GPU voltage regulator interface (used by SMC) */
+	};
+
+	DIE_NODE(ps_clvr_spmi2): power-controller@110 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi2);
+		apple,always-on; /* ANE, fabric, AFR voltage regulator interface (used by SMC) */
+	};
+
+	DIE_NODE(ps_clvr_spmi3): power-controller@118 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi3);
+		apple,always-on; /* Additional voltage regulator, probably used on T6021 (SMC) */
+	};
+
+	DIE_NODE(ps_clvr_spmi4): power-controller@120 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(clvr_spmi4);
+		apple,always-on; /* Additional voltage regulator, probably used on T6021 (SMC) */
+	};
+
+	DIE_NODE(ps_ispsens0): power-controller@128 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ispsens0);
+	};
+
+	DIE_NODE(ps_ispsens1): power-controller@130 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ispsens1);
+	};
+
+	DIE_NODE(ps_ispsens2): power-controller@138 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x138 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ispsens2);
+	};
+
+	DIE_NODE(ps_ispsens3): power-controller@140 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x140 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ispsens3);
+	};
+
+	DIE_NODE(ps_afnc6_ioa): power-controller@148 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x148 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc6_ioa);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc6_ls): power-controller@150 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x150 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc6_ls);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_afnc6_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc6_lw0): power-controller@158 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x158 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc6_lw0);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_afnc6_ls)>;
+	};
+
+	DIE_NODE(ps_afnc2_ioa): power-controller@160 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x160 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc2_ioa);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_dcs_10)>;
+	};
+
+	DIE_NODE(ps_afnc2_ls): power-controller@168 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x168 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc2_ls);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_afnc2_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc2_lw0): power-controller@170 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x170 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc2_lw0);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_afnc2_ls)>;
+	};
+
+	DIE_NODE(ps_afnc2_lw1): power-controller@178 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x178 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc2_lw1);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_afnc2_ls)>;
+	};
+
+	DIE_NODE(ps_afnc3_ioa): power-controller@180 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x180 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc3_ioa);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_afi)>;
+	};
+
+	DIE_NODE(ps_afnc3_ls): power-controller@188 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x188 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc3_ls);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_afnc3_ioa)>;
+	};
+
+	DIE_NODE(ps_afnc3_lw0): power-controller@190 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x190 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afnc3_lw0);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_afnc3_ls)>;
+	};
+
+	DIE_NODE(ps_apcie_gp): power-controller@198 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x198 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_gp);
+		power-domains = <&DIE_NODE(ps_afnc6_lw0)>;
+	};
+
+	DIE_NODE(ps_apcie_st): power-controller@1a0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_st);
+		power-domains = <&DIE_NODE(ps_afnc6_lw0)>;
+	};
+
+	DIE_NODE(ps_ans2): power-controller@1a8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(ans2);
+		power-domains = <&DIE_NODE(ps_afnc6_lw0)>;
+	};
+
+	DIE_NODE(ps_disp0_sys): power-controller@1b0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(disp0_sys);
+		power-domains = <&DIE_NODE(ps_afnc2_lw0)>;
+	};
+
+	DIE_NODE(ps_jpg): power-controller@1b8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(jpg);
+		power-domains = <&DIE_NODE(ps_afnc2_lw0)>;
+	};
+
+	DIE_NODE(ps_sio): power-controller@1c0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio);
+		power-domains = <&DIE_NODE(ps_afnc2_lw1)>;
+	};
+
+	DIE_NODE(ps_isp_sys): power-controller@1c8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(isp_sys);
+		power-domains = <&DIE_NODE(ps_afnc2_lw1)>;
+		status = "disabled";
+	};
+
+	DIE_NODE(ps_disp0_fe): power-controller@1d0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(disp0_fe);
+		power-domains = <&DIE_NODE(ps_disp0_sys)>;
+	};
+
+	DIE_NODE(ps_disp0_cpu0): power-controller@1d8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(disp0_cpu0);
+		power-domains = <&DIE_NODE(ps_disp0_fe)>;
+		apple,min-state = <4>;
+	};
+
+	DIE_NODE(ps_sio_cpu): power-controller@1e0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_cpu);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_fpwm0): power-controller@1e8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(fpwm0);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_fpwm1): power-controller@1f0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(fpwm1);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_fpwm2): power-controller@1f8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x1f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(fpwm2);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c0): power-controller@200 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x200 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c0);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c1): power-controller@208 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x208 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c1);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c2): power-controller@210 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x210 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c2);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c3): power-controller@218 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x218 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c3);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c4): power-controller@220 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x220 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c4);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c5): power-controller@228 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x228 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c5);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c6): power-controller@230 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x230 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c6);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c7): power-controller@238 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x238 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c7);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_i2c8): power-controller@240 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x240 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(i2c8);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_spi_p): power-controller@248 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x248 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi_p);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_sio_spmi0): power-controller@250 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x250 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_spmi0);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_sio_spmi1): power-controller@258 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x258 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_spmi1);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_sio_spmi2): power-controller@260 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x260 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_spmi2);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_uart_p): power-controller@268 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x268 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart_p);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_audio_p): power-controller@270 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x270 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(audio_p);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_sio_adma): power-controller@278 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x278 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sio_adma);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_aes): power-controller@280 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x280 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(aes);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_dptx_phy_ps): power-controller@288 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x288 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dptx_phy_ps);
+		power-domains = <&DIE_NODE(ps_sio)>;
+	};
+
+	DIE_NODE(ps_spi0): power-controller@2d8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi0);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_spi1): power-controller@2e0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi1);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_spi2): power-controller@2e8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi2);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_spi3): power-controller@2f0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi3);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_spi4): power-controller@2f8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x2f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi4);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_spi5): power-controller@300 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x300 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(spi5);
+		power-domains = <&DIE_NODE(ps_spi_p)>;
+	};
+
+	DIE_NODE(ps_uart_n): power-controller@308 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x308 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart_n);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart0): power-controller@310 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x310 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart0);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_amcc1): power-controller@318 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x318 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc1);
+		apple,always-on;
+	};
+
+	DIE_NODE(ps_amcc3): power-controller@320 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x320 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(amcc3);
+		apple,always-on;
+	};
+
+	DIE_NODE(ps_dcs_04): power-controller@328 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x328 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_04);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_05): power-controller@330 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x330 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_05);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_06): power-controller@338 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x338 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_06);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_07): power-controller@340 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x340 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_07);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_12): power-controller@348 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x348 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_12);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_13): power-controller@350 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x350 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_13);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_14): power-controller@358 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x358 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_14);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_dcs_15): power-controller@360 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x360 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dcs_15);
+		apple,always-on; /* LPDDR5 interface */
+	};
+
+	DIE_NODE(ps_uart1): power-controller@368 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x368 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart1);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart2): power-controller@370 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x370 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart2);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart3): power-controller@378 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x378 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart3);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart4): power-controller@380 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x380 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart4);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart5): power-controller@388 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x388 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart5);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_uart6): power-controller@390 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x390 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(uart6);
+		power-domains = <&DIE_NODE(ps_uart_p)>;
+	};
+
+	DIE_NODE(ps_mca0): power-controller@398 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x398 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mca0);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio_adma)>;
+	};
+
+	DIE_NODE(ps_mca1): power-controller@3a0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3a0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mca1);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio_adma)>;
+	};
+
+	DIE_NODE(ps_mca2): power-controller@3a8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3a8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mca2);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio_adma)>;
+	};
+
+	DIE_NODE(ps_mca3): power-controller@3b0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3b0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mca3);
+		power-domains = <&DIE_NODE(ps_audio_p)>, <&DIE_NODE(ps_sio_adma)>;
+	};
+
+	DIE_NODE(ps_dpa0): power-controller@3b8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3b8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa0);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_dpa1): power-controller@3c0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3c0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa1);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_dpa2): power-controller@3c8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3c8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa2);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_dpa3): power-controller@3d0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3d0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa3);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_msr0): power-controller@3d8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3d8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msr0);
+	};
+
+	DIE_NODE(ps_venc_sys): power-controller@3e0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3e0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_sys);
+	};
+
+	DIE_NODE(ps_dpa4): power-controller@3e8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3e8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dpa4);
+		power-domains = <&DIE_NODE(ps_audio_p)>;
+	};
+
+	DIE_NODE(ps_msr0_ase_core): power-controller@3f0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3f0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msr0_ase_core);
+		power-domains = <&DIE_NODE(ps_msr0)>;
+	};
+
+	DIE_NODE(ps_apcie_gpshr_sys): power-controller@3f8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x3f8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_gpshr_sys);
+		power-domains = <&DIE_NODE(ps_apcie_gp)>;
+	};
+
+	DIE_NODE(ps_apcie_st_sys): power-controller@408 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x408 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_st_sys);
+		power-domains = <&DIE_NODE(ps_apcie_st)>, <&DIE_NODE(ps_ans2)>;
+	};
+
+	DIE_NODE(ps_apcie_st1_sys): power-controller@410 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x410 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_st1_sys);
+		power-domains = <&DIE_NODE(ps_apcie_st_sys)>;
+	};
+
+	DIE_NODE(ps_apcie_gp_sys): power-controller@418 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x418 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_gp_sys);
+		power-domains = <&DIE_NODE(ps_apcie_gpshr_sys)>;
+		apple,always-on; /* Breaks things if shut down */
+	};
+
+	DIE_NODE(ps_apcie_ge_sys): power-controller@420 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x420 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_ge_sys);
+		power-domains = <&DIE_NODE(ps_apcie_gpshr_sys)>;
+	};
+
+	DIE_NODE(ps_apcie_phy_sw): power-controller@428 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x428 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(apcie_phy_sw);
+		apple,always-on; /* macOS does not turn this off */
+	};
+
+	DIE_NODE(ps_sep): power-controller@c00 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xc00 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(sep);
+		apple,always-on; /* Locked on */
+	};
+
+	/* There is a dependency tree involved with these PDs,
+	 * but we do not express it here since the ISP driver
+	 * is supposed to sequence them in the right order anyway.
+	 *
+	 * This also works around spurious parent PD activation
+	 * on machines with ISP disabled (desktops), so we don't
+	 * have to enable/disable everything in the per-model DTs.
+	 */
+	DIE_NODE(ps_isp_cpu): power-controller@4000 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(isp_cpu);
+		/* power-domains = <&DIE_NODE(ps_isp_sys)>; */
+	};
+
+	DIE_NODE(ps_isp_fe): power-controller@4008 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(isp_fe);
+		/* power-domains = <&DIE_NODE(ps_isp_sys)>; */
+	};
+
+	DIE_NODE(ps_dprx): power-controller@4010 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(dprx);
+		/* power-domains = <&DIE_NODE(ps_isp_sys)>; */
+	};
+
+	DIE_NODE(ps_isp_vis): power-controller@4018 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(isp_vis);
+		/* power-domains = <&DIE_NODE(ps_isp_fe)>; */
+	};
+
+	DIE_NODE(ps_isp_be): power-controller@4020 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(isp_be);
+		/* power-domains = <&DIE_NODE(ps_isp_fe)>; */
+	};
+
+	DIE_NODE(ps_isp_raw): power-controller@4028 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4028 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(isp_raw);
+		/* power-domains = <&DIE_NODE(ps_isp_fe)>; */
+	};
+
+	DIE_NODE(ps_isp_clr): power-controller@4030 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x4030 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(isp_clr);
+		/* power-domains = <&DIE_NODE(ps_isp_be)>; */
+	};
+
+	DIE_NODE(ps_venc_dma): power-controller@8000 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x8000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_dma);
+		power-domains = <&DIE_NODE(ps_venc_sys)>;
+	};
+
+	DIE_NODE(ps_venc_pipe4): power-controller@8008 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x8008 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_pipe4);
+		power-domains = <&DIE_NODE(ps_venc_dma)>;
+	};
+
+	DIE_NODE(ps_venc_pipe5): power-controller@8010 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x8010 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_pipe5);
+		power-domains = <&DIE_NODE(ps_venc_dma)>;
+	};
+
+	DIE_NODE(ps_venc_me0): power-controller@8018 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x8018 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_me0);
+		power-domains = <&DIE_NODE(ps_venc_pipe5)>, <&DIE_NODE(ps_venc_pipe4)>;
+	};
+
+	DIE_NODE(ps_venc_me1): power-controller@8020 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x8020 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(venc_me1);
+		power-domains = <&DIE_NODE(ps_venc_me0)>;
+	};
+
+	DIE_NODE(ps_prores): power-controller@c000 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xc000 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(prores);
+		power-domains = <&DIE_NODE(ps_afnc3_lw0)>;
+	};
+};
+
+&DIE_NODE(pmgr_mini) {
+	DIE_NODE(ps_debug): power-controller@58 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x58 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(debug);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_nub_spmi0): power-controller@60 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x60 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_spmi0);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_nub_spmi1): power-controller@68 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x68 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_spmi1);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_nub_aon): power-controller@70 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x70 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_aon);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_msg): power-controller@78 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x78 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(msg);
+		apple,always-on; /* Core AON device? */
+	};
+
+	DIE_NODE(ps_nub_gpio): power-controller@80 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x80 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_gpio);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_nub_fabric): power-controller@88 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x88 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_fabric);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_atc0_usb_aon): power-controller@90 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x90 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_usb_aon);
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	DIE_NODE(ps_atc1_usb_aon): power-controller@98 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x98 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_usb_aon);
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	DIE_NODE(ps_atc2_usb_aon): power-controller@a0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xa0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_usb_aon);
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	DIE_NODE(ps_atc3_usb_aon): power-controller@a8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xa8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_usb_aon);
+		apple,always-on; /* Needs to stay on for dwc3 to work */
+	};
+
+	DIE_NODE(ps_mtp_fabric): power-controller@b0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xb0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_fabric);
+		apple,always-on;
+		power-domains = <&DIE_NODE(ps_nub_fabric)>;
+		status = "disabled";
+	};
+
+	DIE_NODE(ps_nub_sram): power-controller@b8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xb8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(nub_sram);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_debug_switch): power-controller@c0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xc0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(debug_switch);
+		apple,always-on; /* Core AON device */
+	};
+
+	DIE_NODE(ps_atc0_usb): power-controller@c8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xc8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc0_usb);
+		power-domains = <&DIE_NODE(ps_atc0_common)>;
+	};
+
+	DIE_NODE(ps_atc1_usb): power-controller@d0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xd0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc1_usb);
+		power-domains = <&DIE_NODE(ps_atc1_common)>;
+	};
+
+	DIE_NODE(ps_atc2_usb): power-controller@d8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xd8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc2_usb);
+		power-domains = <&DIE_NODE(ps_atc2_common)>;
+	};
+
+	DIE_NODE(ps_atc3_usb): power-controller@e0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xe0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(atc3_usb);
+		power-domains = <&DIE_NODE(ps_atc3_common)>;
+	};
+
+#if 0
+	/* MTP stuff is self-managed */
+	DIE_NODE(ps_mtp_gpio): power-controller@e8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xe8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_gpio);
+		apple,always-on; /* MTP always stays on */
+		power-domains = <&DIE_NODE(ps_mtp_fabric)>;
+	};
+
+	DIE_NODE(ps_mtp_base): power-controller@f0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xf0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_base);
+		apple,always-on; /* MTP always stays on */
+		power-domains = <&DIE_NODE(ps_mtp_fabric)>;
+	};
+
+	DIE_NODE(ps_mtp_periph): power-controller@f8 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0xf8 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_periph);
+		apple,always-on; /* MTP always stays on */
+		power-domains = <&DIE_NODE(ps_mtp_fabric)>;
+	};
+
+	DIE_NODE(ps_mtp_spi0): power-controller@100 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_spi0);
+		apple,always-on; /* MTP always stays on */
+		power-domains = <&DIE_NODE(ps_mtp_fabric)>;
+	};
+
+	DIE_NODE(ps_mtp_i2cm0): power-controller@108 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_i2cm0);
+		apple,always-on; /* MTP always stays on */
+		power-domains = <&DIE_NODE(ps_mtp_fabric)>;
+	};
+
+	DIE_NODE(ps_mtp_uart0): power-controller@110 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x110 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_uart0);
+		apple,always-on; /* MTP always stays on */
+		power-domains = <&DIE_NODE(ps_mtp_fabric)>;
+	};
+
+	DIE_NODE(ps_mtp_cpu): power-controller@118 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x118 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_cpu);
+		apple,always-on; /* MTP always stays on */
+		power-domains = <&DIE_NODE(ps_mtp_fabric)>;
+	};
+
+	DIE_NODE(ps_mtp_scm_fabric): power-controller@120 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x120 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_scm_fabric);
+		apple,always-on; /* MTP always stays on */
+		power-domains = <&DIE_NODE(ps_mtp_periph)>;
+	};
+
+	DIE_NODE(ps_mtp_sram): power-controller@128 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x128 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_sram);
+		apple,always-on; /* MTP always stays on */
+		power-domains = <&DIE_NODE(ps_mtp_scm_fabric)>, <&DIE_NODE(ps_mtp_cpu)>;
+	};
+
+	DIE_NODE(ps_mtp_dma): power-controller@130 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x130 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(mtp_dma);
+		apple,always-on; /* MTP always stays on */
+		power-domains = <&DIE_NODE(ps_mtp_sram)>;
+	};
+#endif
+};
+
+&DIE_NODE(pmgr_gfx) {
+	DIE_NODE(ps_gpx): power-controller@0 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x0 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(gpx);
+		apple,min-state = <4>;
+		apple,always-on;
+	};
+
+	DIE_NODE(ps_afr): power-controller@100 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x100 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(afr);
+		/* Apple Fabric, media stuff: this can power down */
+		apple,min-state = <4>;
+	};
+
+	DIE_NODE(ps_gfx): power-controller@108 {
+		compatible = "apple,t6020-pmgr-pwrstate", "apple,t8103-pmgr-pwrstate";
+		reg = <0x108 4>;
+		#power-domain-cells = <0>;
+		#reset-cells = <0>;
+		label = DIE_LABEL(gfx);
+		power-domains = <&DIE_NODE(ps_afr)>, <&DIE_NODE(ps_gpx)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/apple/t7000.dtsi b/arch/arm64/boot/dts/apple/t7000.dtsi
index 52edc8d776a9..0342455d3444 100644
--- a/arch/arm64/boot/dts/apple/t7000.dtsi
+++ b/arch/arm64/boot/dts/apple/t7000.dtsi
@@ -144,6 +144,62 @@
 			status = "disabled";
 		};
 
+		i2c0: i2c@20a110000 {
+			compatible = "apple,t7000-i2c", "apple,i2c";
+			reg = <0x2 0x0a110000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 174 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@20a111000 {
+			compatible = "apple,t7000-i2c", "apple,i2c";
+			reg = <0x2 0x0a111000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 175 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@20a112000 {
+			compatible = "apple,t7000-i2c", "apple,i2c";
+			reg = <0x2 0x0a112000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 176 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@20a113000 {
+			compatible = "apple,t7000-i2c", "apple,i2c";
+			reg = <0x2 0x0a113000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 177 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		pmgr: power-management@20e000000 {
 			compatible = "apple,t7000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
 			#address-cells = <1>;
@@ -195,6 +251,26 @@
 				     <AIC_IRQ 66 IRQ_TYPE_LEVEL_HIGH>,
 				     <AIC_IRQ 67 IRQ_TYPE_LEVEL_HIGH>,
 				     <AIC_IRQ 68 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(97, 1)>,
+					 <APPLE_PINMUX(96, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(139, 1)>,
+					 <APPLE_PINMUX(138, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(65, 1)>,
+					 <APPLE_PINMUX(64, 1)>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pinmux = <APPLE_PINMUX(87, 1)>,
+					 <APPLE_PINMUX(86, 1)>;
+			};
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/apple/t7001.dtsi b/arch/arm64/boot/dts/apple/t7001.dtsi
index a2efa81305df..e1afb0542369 100644
--- a/arch/arm64/boot/dts/apple/t7001.dtsi
+++ b/arch/arm64/boot/dts/apple/t7001.dtsi
@@ -144,6 +144,62 @@
 			status = "disabled";
 		};
 
+		i2c0: i2c@20a110000 {
+			compatible = "apple,t7000-i2c", "apple,i2c";
+			reg = <0x2 0x0a110000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 174 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@20a111000 {
+			compatible = "apple,t7000-i2c", "apple,i2c";
+			reg = <0x2 0x0a111000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 175 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@20a112000 {
+			compatible = "apple,t7000-i2c", "apple,i2c";
+			reg = <0x2 0x0a112000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 176 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@20a113000 {
+			compatible = "apple,t7000-i2c", "apple,i2c";
+			reg = <0x2 0x0a113000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 177 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		pmgr: power-management@20e000000 {
 			compatible = "apple,t7000-pmgr", "apple,pmgr", "syscon", "simple-mfd";
 			#address-cells = <1>;
@@ -188,6 +244,26 @@
 				     <AIC_IRQ 66 IRQ_TYPE_LEVEL_HIGH>,
 				     <AIC_IRQ 67 IRQ_TYPE_LEVEL_HIGH>,
 				     <AIC_IRQ 68 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(38, 1)>,
+					 <APPLE_PINMUX(37, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(66, 1)>,
+					 <APPLE_PINMUX(65, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(133, 1)>,
+					 <APPLE_PINMUX(132, 1)>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pinmux = <APPLE_PINMUX(135, 1)>,
+					 <APPLE_PINMUX(134, 1)>;
+			};
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/apple/t8010.dtsi b/arch/arm64/boot/dts/apple/t8010.dtsi
index b961d4f65bc3..522b3896aa87 100644
--- a/arch/arm64/boot/dts/apple/t8010.dtsi
+++ b/arch/arm64/boot/dts/apple/t8010.dtsi
@@ -164,6 +164,62 @@
 			status = "disabled";
 		};
 
+		i2c0: i2c@20a110000 {
+			compatible = "apple,t8010-i2c", "apple,i2c";
+			reg = <0x2 0x0a110000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 232 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@20a111000 {
+			compatible = "apple,t8010-i2c", "apple,i2c";
+			reg = <0x2 0x0a111000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 233 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@20a112000 {
+			compatible = "apple,t8010-i2c", "apple,i2c";
+			reg = <0x2 0x0a112000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 234 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@20a113000 {
+			compatible = "apple,t8010-i2c", "apple,i2c";
+			reg = <0x2 0x0a113000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 235 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		pmgr: power-management@20e000000 {
 			compatible = "apple,t8010-pmgr", "apple,pmgr", "syscon", "simple-mfd";
 			#address-cells = <1>;
@@ -207,6 +263,26 @@
 				     <AIC_IRQ 46 IRQ_TYPE_LEVEL_HIGH>,
 				     <AIC_IRQ 47 IRQ_TYPE_LEVEL_HIGH>,
 				     <AIC_IRQ 48 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(197, 1)>,
+					 <APPLE_PINMUX(196, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(40, 1)>,
+					 <APPLE_PINMUX(39, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(132, 1)>,
+					 <APPLE_PINMUX(133, 1)>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pinmux = <APPLE_PINMUX(41, 1)>,
+					 <APPLE_PINMUX(42, 1)>;
+			};
 		};
 
 		pinctrl_aop: pinctrl@2100f0000 {
diff --git a/arch/arm64/boot/dts/apple/t8011.dtsi b/arch/arm64/boot/dts/apple/t8011.dtsi
index 974f78cc77cf..039aa4d1e887 100644
--- a/arch/arm64/boot/dts/apple/t8011.dtsi
+++ b/arch/arm64/boot/dts/apple/t8011.dtsi
@@ -168,6 +168,62 @@
 			status = "disabled";
 		};
 
+		i2c0: i2c@20a110000 {
+			compatible = "apple,t8010-i2c", "apple,i2c";
+			reg = <0x2 0x0a110000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 230 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@20a111000 {
+			compatible = "apple,t8010-i2c", "apple,i2c";
+			reg = <0x2 0x0a111000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 231 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@20a112000 {
+			compatible = "apple,t8010-i2c", "apple,i2c";
+			reg = <0x2 0x0a112000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 232 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@20a113000 {
+			compatible = "apple,t8010-i2c", "apple,i2c";
+			reg = <0x2 0x0a113000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 233 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		pmgr: power-management@20e000000 {
 			compatible = "apple,t8010-pmgr", "apple,pmgr", "syscon", "simple-mfd";
 			#address-cells = <1>;
@@ -204,6 +260,26 @@
 				     <AIC_IRQ 46 IRQ_TYPE_LEVEL_HIGH>,
 				     <AIC_IRQ 47 IRQ_TYPE_LEVEL_HIGH>,
 				     <AIC_IRQ 48 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(211, 1)>,
+					 <APPLE_PINMUX(210, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(156, 1)>,
+					 <APPLE_PINMUX(155, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(58, 1)>,
+					 <APPLE_PINMUX(57, 1)>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pinmux = <APPLE_PINMUX(158, 1)>,
+					 <APPLE_PINMUX(157, 1)>;
+			};
 		};
 
 		pinctrl_aop: pinctrl@2100f0000 {
diff --git a/arch/arm64/boot/dts/apple/t8012.dtsi b/arch/arm64/boot/dts/apple/t8012.dtsi
index a259e5735d93..e7923814169b 100644
--- a/arch/arm64/boot/dts/apple/t8012.dtsi
+++ b/arch/arm64/boot/dts/apple/t8012.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/interrupt-controller/apple-aic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/apple.h>
+#include <dt-bindings/spmi/spmi.h>
 
 / {
 	interrupt-parent = <&aic>;
@@ -220,6 +221,13 @@
 				     <AIC_IRQ 137 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		spmi: spmi@211180700 {
+			compatible = "apple,t8012-spmi", "apple,t8103-spmi";
+			reg = <0x2 0x11180700 0x0 0x100>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
 		pinctrl_nub: pinctrl@2111f0000 {
 			compatible = "apple,t8010-pinctrl", "apple,pinctrl";
 			reg = <0x2 0x111f0000 0x0 0x1000>;
diff --git a/arch/arm64/boot/dts/apple/t8015-pmgr.dtsi b/arch/arm64/boot/dts/apple/t8015-pmgr.dtsi
index e238c2d2732f..1d8da9c7863e 100644
--- a/arch/arm64/boot/dts/apple/t8015-pmgr.dtsi
+++ b/arch/arm64/boot/dts/apple/t8015-pmgr.dtsi
@@ -658,6 +658,7 @@
 		#power-domain-cells = <0>;
 		#reset-cells = <0>;
 		label = "pcie";
+		power-domains = <&ps_pcie_aux>, <&ps_pcie_direct>, <&ps_pcie_ref>;
 	};
 
 	ps_pcie_aux: power-controller@80320 {
diff --git a/arch/arm64/boot/dts/apple/t8015.dtsi b/arch/arm64/boot/dts/apple/t8015.dtsi
index 12acf8fc8bc6..586d3cf1f375 100644
--- a/arch/arm64/boot/dts/apple/t8015.dtsi
+++ b/arch/arm64/boot/dts/apple/t8015.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/interrupt-controller/apple-aic.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/apple.h>
+#include <dt-bindings/spmi/spmi.h>
 
 / {
 	interrupt-parent = <&aic>;
@@ -265,6 +266,62 @@
 			#performance-domain-cells = <0>;
 		};
 
+		i2c0: i2c@22e200000 {
+			compatible = "apple,t8015-i2c", "apple,i2c";
+			reg = <0x2 0x2e200000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 304 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c0_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c0>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@22e204000 {
+			compatible = "apple,t8015-i2c", "apple,i2c";
+			reg = <0x2 0x2e204000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 305 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c1_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@22e208000 {
+			compatible = "apple,t8015-i2c", "apple,i2c";
+			reg = <0x2 0x2e208000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 306 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c2_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c2>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@22e20c000 {
+			compatible = "apple,t8015-i2c", "apple,i2c";
+			reg = <0x2 0x2e20c000 0x0 0x1000>;
+			clocks = <&clkref>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 307 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-0 = <&i2c3_pins>;
+			pinctrl-names = "default";
+			power-domains = <&ps_i2c3>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		serial0: serial@22e600000 {
 			compatible = "apple,s5l-uart";
 			reg = <0x2 0x2e600000 0x0 0x4000>;
@@ -321,6 +378,26 @@
 				     <AIC_IRQ 54 IRQ_TYPE_LEVEL_HIGH>,
 				     <AIC_IRQ 55 IRQ_TYPE_LEVEL_HIGH>,
 				     <AIC_IRQ 56 IRQ_TYPE_LEVEL_HIGH>;
+
+			i2c0_pins: i2c0-pins {
+				pinmux = <APPLE_PINMUX(73, 1)>,
+					 <APPLE_PINMUX(72, 1)>;
+			};
+
+			i2c1_pins: i2c1-pins {
+				pinmux = <APPLE_PINMUX(182, 1)>,
+					 <APPLE_PINMUX(181, 1)>;
+			};
+
+			i2c2_pins: i2c2-pins {
+				pinmux = <APPLE_PINMUX(4, 1)>,
+					 <APPLE_PINMUX(3, 1)>;
+			};
+
+			i2c3_pins: i2c3-pins {
+				pinmux = <APPLE_PINMUX(184, 1)>,
+					 <APPLE_PINMUX(183, 1)>;
+			};
 		};
 
 		pinctrl_aop: pinctrl@2340f0000 {
@@ -344,6 +421,13 @@
 				     <AIC_IRQ 141 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		spmi: spmi@235180700 {
+			compatible = "apple,t8015-spmi", "apple,t8103-spmi";
+			reg = <0x2 0x35180700 0x0 0x100>;
+			#address-cells = <2>;
+			#size-cells = <0>;
+		};
+
 		pinctrl_nub: pinctrl@2351f0000 {
 			compatible = "apple,t8015-pinctrl", "apple,pinctrl";
 			reg = <0x2 0x351f0000 0x0 0x4000>;
@@ -402,6 +486,40 @@
 			 */
 			status = "disabled";
 		};
+
+		ans_mbox: mbox@257008000 {
+			compatible = "apple,t8015-asc-mailbox";
+			reg = <0x2 0x57008000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 265 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 266 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 267 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 268 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "send-empty", "send-not-empty",
+				"recv-empty", "recv-not-empty";
+			#mbox-cells = <0>;
+			power-domains = <&ps_ans2>;
+		};
+
+		sart: iommu@259c50000 {
+			compatible = "apple,t8015-sart";
+			reg = <0x2 0x59c50000 0x0 0x10000>;
+			power-domains = <&ps_ans2>;
+		};
+
+		nvme@259cc0000 {
+			compatible = "apple,t8015-nvme-ans2";
+			reg = <0x2 0x59cc0000 0x0 0x40000>,
+				<0x2 0x59d20000 0x0 0x2000>;
+			reg-names = "nvme", "ans";
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 270 IRQ_TYPE_LEVEL_HIGH>;
+			mboxes = <&ans_mbox>;
+			apple,sart = <&sart>;
+			power-domains = <&ps_ans2>, <&ps_pcie>;
+			power-domain-names = "ans", "apcie0";
+			resets = <&ps_ans2>;
+		};
 	};
 
 	timer {
diff --git a/arch/arm64/boot/dts/apple/t8103-j457.dts b/arch/arm64/boot/dts/apple/t8103-j457.dts
index 152f95fd49a2..7089ccf3ce55 100644
--- a/arch/arm64/boot/dts/apple/t8103-j457.dts
+++ b/arch/arm64/boot/dts/apple/t8103-j457.dts
@@ -21,6 +21,14 @@
 	};
 };
 
+/*
+ * Adjust pcie0's iommu-map to account for the disabled port01.
+ */
+&pcie0 {
+	iommu-map = <0x100 &pcie0_dart_0 1 1>,
+			<0x200 &pcie0_dart_2 1 1>;
+};
+
 &bluetooth0 {
 	brcm,board-type = "apple,santorini";
 };
@@ -36,10 +44,10 @@
  */
 
 &port02 {
-	bus-range = <3 3>;
+	bus-range = <2 2>;
 	status = "okay";
 	ethernet0: ethernet@0,0 {
-		reg = <0x30000 0x0 0x0 0x0 0x0>;
+		reg = <0x20000 0x0 0x0 0x0 0x0>;
 		/* To be filled by the loader */
 		local-mac-address = [00 10 18 00 00 00];
 	};
diff --git a/arch/arm64/boot/dts/apple/t8103.dtsi b/arch/arm64/boot/dts/apple/t8103.dtsi
index 589ddc039799..8b7b27887968 100644
--- a/arch/arm64/boot/dts/apple/t8103.dtsi
+++ b/arch/arm64/boot/dts/apple/t8103.dtsi
@@ -896,6 +896,41 @@
 			interrupts = <AIC_IRQ 338 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		smc: smc@23e400000 {
+			compatible = "apple,t8103-smc", "apple,smc";
+			reg = <0x2 0x3e400000 0x0 0x4000>,
+				<0x2 0x3fe00000 0x0 0x100000>;
+			reg-names = "smc", "sram";
+			mboxes = <&smc_mbox>;
+
+			smc_gpio: gpio {
+				compatible = "apple,smc-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			smc_reboot: reboot {
+				compatible = "apple,smc-reboot";
+				nvmem-cells = <&shutdown_flag>, <&boot_stage>,
+					<&boot_error_count>, <&panic_count>;
+				nvmem-cell-names = "shutdown_flag", "boot_stage",
+					"boot_error_count", "panic_count";
+			};
+		};
+
+		smc_mbox: mbox@23e408000 {
+			compatible = "apple,t8103-asc-mailbox", "apple,asc-mailbox-v4";
+			reg = <0x2 0x3e408000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 400 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 401 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 402 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 403 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "send-empty", "send-not-empty",
+				"recv-empty", "recv-not-empty";
+			#mbox-cells = <0>;
+		};
+
 		pinctrl_smc: pinctrl@23e820000 {
 			compatible = "apple,t8103-pinctrl", "apple,pinctrl";
 			reg = <0x2 0x3e820000 0x0 0x4000>;
diff --git a/arch/arm64/boot/dts/apple/t8112-j415.dts b/arch/arm64/boot/dts/apple/t8112-j415.dts
new file mode 100644
index 000000000000..b54e218e5384
--- /dev/null
+++ b/arch/arm64/boot/dts/apple/t8112-j415.dts
@@ -0,0 +1,80 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Apple MacBook Air (15-inch, M2, 2023)
+ *
+ * target-type: J415
+ *
+ * Copyright The Asahi Linux Contributors
+ */
+
+/dts-v1/;
+
+#include "t8112.dtsi"
+#include "t8112-jxxx.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	compatible = "apple,j415", "apple,t8112", "apple,arm-platform";
+	model = "Apple MacBook Air (15-inch, M2, 2023)";
+
+	aliases {
+		bluetooth0 = &bluetooth0;
+		wifi0 = &wifi0;
+	};
+
+	led-controller {
+		compatible = "pwm-leds";
+		led-0 {
+			pwms = <&fpwm1 0 40000>;
+			label = "kbd_backlight";
+			function = LED_FUNCTION_KBD_BACKLIGHT;
+			color = <LED_COLOR_ID_WHITE>;
+			max-brightness = <255>;
+			default-state = "keep";
+		};
+	};
+};
+
+/*
+ * Force the bus number assignments so that we can declare some of the
+ * on-board devices and properties that are populated by the bootloader
+ * (such as MAC addresses).
+ */
+&port00 {
+	bus-range = <1 1>;
+	wifi0: wifi@0,0 {
+		compatible = "pci14e4,4433";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-mac-address = [00 10 18 00 00 10];
+		apple,antenna-sku = "XX";
+		brcm,board-type = "apple,snake";
+	};
+
+	bluetooth0: bluetooth@0,1 {
+		compatible = "pci14e4,5f71";
+		reg = <0x10100 0x0 0x0 0x0 0x0>;
+		/* To be filled by the loader */
+		local-bd-address = [00 00 00 00 00 00];
+		brcm,board-type = "apple,snake";
+	};
+};
+
+&i2c0 {
+	/* MagSafe port */
+	hpm5: usb-pd@3a {
+		compatible = "apple,cd321x";
+		reg = <0x3a>;
+		interrupt-parent = <&pinctrl_ap>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "irq";
+	};
+};
+
+&i2c4 {
+	status = "okay";
+};
+
+&fpwm1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/apple/t8112.dtsi b/arch/arm64/boot/dts/apple/t8112.dtsi
index b36b345861b6..3f79878b25af 100644
--- a/arch/arm64/boot/dts/apple/t8112.dtsi
+++ b/arch/arm64/boot/dts/apple/t8112.dtsi
@@ -899,6 +899,41 @@
 			};
 		};
 
+		smc: smc@23e400000 {
+			compatible = "apple,t8112-smc", "apple,smc";
+			reg = <0x2 0x3e400000 0x0 0x4000>,
+				<0x2 0x3fe00000 0x0 0x100000>;
+			reg-names = "smc", "sram";
+			mboxes = <&smc_mbox>;
+
+			smc_gpio: gpio {
+				compatible = "apple,smc-gpio";
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			smc_reboot: reboot {
+				compatible = "apple,smc-reboot";
+				nvmem-cells = <&shutdown_flag>, <&boot_stage>,
+					<&boot_error_count>, <&panic_count>;
+				nvmem-cell-names = "shutdown_flag", "boot_stage",
+					"boot_error_count", "panic_count";
+			};
+		};
+
+		smc_mbox: mbox@23e408000 {
+			compatible = "apple,t8112-asc-mailbox", "apple,asc-mailbox-v4";
+			reg = <0x2 0x3e408000 0x0 0x4000>;
+			interrupt-parent = <&aic>;
+			interrupts = <AIC_IRQ 499 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 500 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 501 IRQ_TYPE_LEVEL_HIGH>,
+				<AIC_IRQ 502 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "send-empty", "send-not-empty",
+				"recv-empty", "recv-not-empty";
+			#mbox-cells = <0>;
+		};
+
 		pinctrl_smc: pinctrl@23e820000 {
 			compatible = "apple,t8112-pinctrl", "apple,pinctrl";
 			reg = <0x2 0x3e820000 0x0 0x4000>;
diff --git a/arch/arm64/boot/dts/axiado/ax3000-evk.dts b/arch/arm64/boot/dts/axiado/ax3000-evk.dts
index 92101c5b534b..b86e96962557 100644
--- a/arch/arm64/boot/dts/axiado/ax3000-evk.dts
+++ b/arch/arm64/boot/dts/axiado/ax3000-evk.dts
@@ -14,6 +14,9 @@
 	#size-cells = <2>;
 
 	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+		serial2 = &uart2;
 		serial3 = &uart3;
 	};
 
diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts
index 6ea3c102e0d6..04738bf281eb 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b-ovl-rp1.dts
@@ -2,6 +2,7 @@
 /dts-v1/;
 
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include "bcm2712.dtsi"
 
 / {
@@ -29,6 +30,20 @@
 		reg = <0 0 0 0x28000000>;
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwr_button_default>;
+		status = "okay";
+
+		power_button: power-button {
+			label = "pwr_button";
+			linux,code = <KEY_POWER>;
+			gpios = <&gio 20 GPIO_ACTIVE_LOW>;
+			debounce-interval = <50>;
+		};
+	};
+
 	sd_io_1v8_reg: sd-io-1v8-reg {
 		compatible = "regulator-gpio";
 		regulator-name = "vdd-sd-io";
@@ -51,6 +66,90 @@
 		enable-active-high;
 		gpios = <&gio_aon 4 GPIO_ACTIVE_HIGH>;
 	};
+
+	wl_on_reg: wl-on-reg {
+		compatible = "regulator-fixed";
+		regulator-name = "wl-on-regulator";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		pinctrl-0 = <&wl_on_default>;
+		pinctrl-names = "default";
+		gpio = <&gio 28 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <150000>;
+		enable-active-high;
+	};
+};
+
+&pinctrl {
+	bt_shutdown_default: bt-shutdown-default-state {
+		function = "gpio";
+		pins = "gpio29";
+	};
+
+	emmc_sd_default: emmc-sd-default-state {
+		pins = "emmc_cmd", "emmc_dat0", "emmc_dat1", "emmc_dat2", "emmc_dat3";
+		bias-pull-up;
+	};
+
+	pwr_button_default: pwr-button-default-state {
+		function = "gpio";
+		pins = "gpio20";
+		bias-pull-up;
+	};
+
+	sdio2_30_default: sdio2-30-default-state {
+		clk-pins {
+			function = "sd2";
+			pins = "gpio30";
+			bias-disable;
+		};
+		cmd-pins {
+			function = "sd2";
+			pins = "gpio31";
+			bias-pull-up;
+		};
+		dat-pins {
+			function = "sd2";
+			pins = "gpio32", "gpio33", "gpio34", "gpio35";
+			bias-pull-up;
+		};
+	};
+
+	uarta_24_default: uarta-24-default-state {
+		rts-pins {
+			function = "uart0";
+			pins = "gpio24";
+			bias-disable;
+		};
+		cts-pins {
+			function = "uart0";
+			pins = "gpio25";
+			bias-pull-up;
+		};
+		txd-pins {
+			function = "uart0";
+			pins = "gpio26";
+			bias-disable;
+		};
+		rxd-pins {
+			function = "uart0";
+			pins = "gpio27";
+			bias-pull-up;
+		};
+	};
+
+	wl_on_default: wl-on-default-state {
+		function = "gpio";
+		pins = "gpio28";
+	};
+};
+
+&pinctrl_aon {
+	emmc_aon_cd_default: emmc-aon-cd-default-state {
+		function = "sd_card_g";
+		pins = "aon_gpio5";
+		bias-pull-up;
+	};
 };
 
 /* The Debug UART, on Rpi5 it's on JST-SH 1.0mm 3-pin connector
@@ -62,12 +161,32 @@
 
 /* SDIO1 is used to drive the SD card */
 &sdio1 {
+	pinctrl-0 = <&emmc_sd_default>, <&emmc_aon_cd_default>;
+	pinctrl-names = "default";
 	vqmmc-supply = <&sd_io_1v8_reg>;
 	vmmc-supply = <&sd_vcc_reg>;
 	bus-width = <4>;
 	sd-uhs-sdr50;
 	sd-uhs-ddr50;
 	sd-uhs-sdr104;
+	cd-gpios = <&gio_aon 5 GPIO_ACTIVE_LOW>;
+};
+
+&sdio2 {
+	pinctrl-0 = <&sdio2_30_default>;
+	pinctrl-names = "default";
+	bus-width = <4>;
+	vmmc-supply = <&wl_on_reg>;
+	sd-uhs-ddr50;
+	non-removable;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	wifi: wifi@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
 };
 
 &soc {
@@ -97,6 +216,20 @@
 	};
 };
 
+/* uarta communicates with the BT module */
+&uarta {
+	uart-has-rtscts;
+	pinctrl-0 = <&uarta_24_default &bt_shutdown_default>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	bluetooth: bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		max-speed = <3000000>;
+		shutdown-gpios = <&gio 29 GPIO_ACTIVE_HIGH>;
+	};
+};
+
 &hvs {
 	clocks = <&firmware_clocks 4>, <&firmware_clocks 16>;
 	clock-names = "core", "disp";
diff --git a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
index a70a9b158df3..b8f256545022 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
+++ b/arch/arm64/boot/dts/broadcom/bcm2712-rpi-5-b.dts
@@ -4,8 +4,14 @@
  * the RP1 driver to load the RP1 dtb overlay at runtime, while
  * bcm2712-rpi-5-b.dts (this file) is the fully defined one (i.e. it
  * already contains RP1 node, so no overlay is loaded nor needed).
- * This file is not intended to be modified, nodes should be added
- * to the included bcm2712-rpi-5-b-ovl-rp1.dts.
+ * This file is intended to host the override nodes for the RP1 peripherals,
+ * e.g. to declare the phy of the ethernet interface or the custom pin setup
+ * for several RP1 peripherals.
+ * This in turn is due to the fact that there's no current generic
+ * infrastructure to reference nodes (i.e. the nodes in rp1-common.dtsi) that
+ * are not yet defined in the DT since they are loaded at runtime via overlay.
+ * All other nodes that do not have anything to do with RP1 should be added
+ * to the included bcm2712-rpi-5-b-ovl-rp1.dts instead.
  */
 
 /dts-v1/;
@@ -16,10 +22,37 @@
 	#include "rp1-nexus.dtsi"
 };
 
-&pcie1 {
+&rp1_eth {
 	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy1>;
+
+	mdio {
+		reg = <0x1>;
+		reset-gpios = <&rp1_gpio 32 GPIO_ACTIVE_LOW>;
+		reset-delay-us = <5000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy1: ethernet-phy@1 {
+			reg = <0x1>;
+		};
+	};
 };
 
-&pcie2 {
+&rp1_gpio {
+	usb_vbus_default_state: usb-vbus-default-state {
+		function = "vbus1";
+		groups = "vbus1";
+	};
+};
+
+&rp1_usb0 {
+	pinctrl-0 = <&usb_vbus_default_state>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&rp1_usb1 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
index 0a9212d3106f..e77a66adc22a 100644
--- a/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
+++ b/arch/arm64/boot/dts/broadcom/bcm2712.dtsi
@@ -38,6 +38,13 @@
 			clock-frequency = <200000000>;
 			clock-output-names = "emmc2-clock";
 		};
+
+		clk_sw_baud: clk-sw-baud {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <96000000>;
+			clock-output-names = "sw-baud";
+		};
 	};
 
 	cpus: cpus {
@@ -243,6 +250,39 @@
 			status = "disabled";
 		};
 
+		pinctrl: pinctrl@7d504100 {
+			compatible = "brcm,bcm2712c0-pinctrl";
+			reg = <0x7d504100 0x30>;
+		};
+
+		gio: gpio@7d508500 {
+			compatible = "brcm,bcm7445-gpio", "brcm,brcmstb-gpio";
+			reg = <0x7d508500 0x40>;
+			interrupt-parent = <&main_irq>;
+			interrupts = <0>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			brcm,gpio-bank-widths = <32 22>;
+		};
+
+		uarta: serial@7d50c000 {
+			compatible = "brcm,bcm7271-uart";
+			reg = <0x7d50c000 0x20>;
+			reg-names = "uart";
+			clocks = <&clk_sw_baud>;
+			clock-names = "sw_baud";
+			interrupts = <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uart";
+			status = "disabled";
+		};
+
+		pinctrl_aon: pinctrl@7d510700 {
+			compatible = "brcm,bcm2712c0-aon-pinctrl";
+			reg = <0x7d510700 0x20>;
+		};
+
 		interrupt-controller@7d517000 {
 			compatible = "brcm,bcm7271-l2-intc";
 			reg = <0x7d517000 0x10>;
@@ -263,6 +303,21 @@
 			 */
 		};
 
+		sdio2: mmc@1100000 {
+			compatible = "brcm,bcm2712-sdhci",
+				     "brcm,sdhci-brcmstb";
+			reg = <0x01100000  0x260>,
+			      <0x01100400  0x200>;
+			reg-names = "host", "cfg";
+			interrupts = <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_emmc2>;
+			clock-names = "sw_sdio";
+			sdhci-caps-mask = <0x0000C000 0x0>;
+			sdhci-caps = <0x0 0x0>;
+			mmc-ddr-3_3v;
+			status = "disabled";
+		};
+
 		gicv2: interrupt-controller@7fff9000 {
 			compatible = "arm,gic-400";
 			reg = <0x7fff9000 0x1000>,
@@ -270,6 +325,7 @@
 			      <0x7fffc000 0x2000>,
 			      <0x7fffe000 0x2000>;
 			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 		};
 
diff --git a/arch/arm64/boot/dts/broadcom/rp1-common.dtsi b/arch/arm64/boot/dts/broadcom/rp1-common.dtsi
index 5002a375eb0b..5a815c379794 100644
--- a/arch/arm64/boot/dts/broadcom/rp1-common.dtsi
+++ b/arch/arm64/boot/dts/broadcom/rp1-common.dtsi
@@ -39,4 +39,48 @@ pci_ep_bus: pci-ep-bus@1 {
 			     <1 IRQ_TYPE_LEVEL_HIGH>,
 			     <2 IRQ_TYPE_LEVEL_HIGH>;
 	};
+
+	rp1_eth: ethernet@40100000 {
+		compatible = "raspberrypi,rp1-gem";
+		reg = <0x00 0x40100000  0x0 0x4000>;
+		interrupts = <6 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&rp1_clocks RP1_CLK_SYS>,
+			 <&rp1_clocks RP1_CLK_SYS>,
+			 <&rp1_clocks RP1_CLK_ETH>,
+			 <&rp1_clocks RP1_CLK_ETH_TSU>;
+		clock-names = "pclk", "hclk", "tx_clk", "tsu_clk";
+		local-mac-address = [00 00 00 00 00 00];
+		status = "disabled";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	rp1_usb0: usb@40200000 {
+		compatible = "snps,dwc3";
+		reg = <0x00 0x40200000  0x0 0x100000>;
+		interrupts = <31 IRQ_TYPE_EDGE_RISING>;
+		dr_mode = "host";
+		usb3-lpm-capable;
+		snps,dis_rxdet_inp3_quirk;
+		snps,parkmode-disable-hs-quirk;
+		snps,parkmode-disable-ss-quirk;
+		snps,tx-max-burst = /bits/ 8 <8>;
+		snps,tx-thr-num-pkt = /bits/ 8 <2>;
+		status = "disabled";
+	};
+
+	rp1_usb1: usb@40300000 {
+		compatible = "snps,dwc3";
+		reg = <0x00 0x40300000  0x0 0x100000>;
+		interrupts = <36 IRQ_TYPE_EDGE_RISING>;
+		dr_mode = "host";
+		usb3-lpm-capable;
+		snps,dis_rxdet_inp3_quirk;
+		snps,parkmode-disable-hs-quirk;
+		snps,parkmode-disable-ss-quirk;
+		snps,tx-max-burst = /bits/ 8 <8>;
+		snps,tx-thr-num-pkt = /bits/ 8 <2>;
+		status = "disabled";
+	};
 };
diff --git a/arch/arm64/boot/dts/cix/sky1.dtsi b/arch/arm64/boot/dts/cix/sky1.dtsi
index 7dfe7677e649..2fb2c99c0796 100644
--- a/arch/arm64/boot/dts/cix/sky1.dtsi
+++ b/arch/arm64/boot/dts/cix/sky1.dtsi
@@ -192,6 +192,78 @@
 		#address-cells = <2>;
 		#size-cells = <2>;
 
+		i2c0: i2c@4010000 {
+			compatible = "cdns,i2c-r1p14";
+			reg = <0x0 0x04010000 0x0 0x10000>;
+			clock-frequency = <400000>;
+			clocks = <&scmi_clk CLK_TREE_FCH_I2C0_APB>;
+			interrupts = <GIC_SPI 286 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@4020000 {
+			compatible = "cdns,i2c-r1p14";
+			reg = <0x0 0x04020000 0x0 0x10000>;
+			clock-frequency = <400000>;
+			clocks = <&scmi_clk CLK_TREE_FCH_I2C1_APB>;
+			interrupts = <GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@4030000 {
+			compatible = "cdns,i2c-r1p14";
+			reg = <0x0 0x04030000 0x0 0x10000>;
+			clock-frequency = <400000>;
+			clocks = <&scmi_clk CLK_TREE_FCH_I2C2_APB>;
+			interrupts = <GIC_SPI 288 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		i2c3: i2c@4040000 {
+			compatible = "cdns,i2c-r1p14";
+			reg = <0x0 0x04040000 0x0 0x10000>;
+			clock-frequency = <400000>;
+			clocks = <&scmi_clk CLK_TREE_FCH_I2C3_APB>;
+			interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		i2c4: i2c@4050000 {
+			compatible = "cdns,i2c-r1p14";
+			reg = <0x0 0x04050000 0x0 0x10000>;
+			clock-frequency = <400000>;
+			clocks = <&scmi_clk CLK_TREE_FCH_I2C4_APB>;
+			interrupts = <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		i2c5: i2c@4060000 {
+			compatible = "cdns,i2c-r1p14";
+			reg = <0x0 0x04060000 0x0 0x10000>;
+			clock-frequency = <400000>;
+			clocks = <&scmi_clk CLK_TREE_FCH_I2C5_APB>;
+			interrupts = <GIC_SPI 291 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		i2c6: i2c@4070000 {
+			compatible = "cdns,i2c-r1p14";
+			reg = <0x0 0x04070000 0x0 0x10000>;
+			clock-frequency = <400000>;
+			clocks = <&scmi_clk CLK_TREE_FCH_I2C6_APB>;
+			interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
+		i2c7: i2c@4080000 {
+			compatible = "cdns,i2c-r1p14";
+			reg = <0x0 0x04080000 0x0 0x10000>;
+			clock-frequency = <400000>;
+			clocks = <&scmi_clk CLK_TREE_FCH_I2C7_APB>;
+			interrupts = <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH 0>;
+			status = "disabled";
+		};
+
 		uart0: serial@40b0000 {
 			compatible = "arm,pl011", "arm,primecell";
 			reg = <0x0 0x040b0000 0x0 0x1000>;
@@ -228,6 +300,34 @@
 			status = "disabled";
 		};
 
+		i3c0: i3c@40f0000 {
+			compatible = "cdns,i3c-master";
+			reg = <0x0 0x040f0000 0x0 0x10000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&scmi_clk CLK_TREE_FCH_I3C0_APB>,
+				 <&scmi_clk CLK_TREE_FCH_I3C0_FUNC>;
+			clock-names = "pclk", "sysclk";
+			i3c-scl-hz = <400000>;
+			i2c-scl-hz = <100000>;
+			status = "disabled";
+		};
+
+		i3c1: i3c@4100000 {
+			compatible = "cdns,i3c-master";
+			reg = <0x0 0x04100000 0x0 0x10000>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH 0>;
+			clocks = <&scmi_clk CLK_TREE_FCH_I3C1_APB>,
+				 <&scmi_clk CLK_TREE_FCH_I3C1_FUNC>;
+			clock-names = "pclk", "sysclk";
+			i3c-scl-hz = <400000>;
+			i2c-scl-hz = <100000>;
+			status = "disabled";
+		};
+
 		mbox_ap2se: mailbox@5060000 {
 			compatible = "cix,sky1-mbox";
 			reg = <0x0 0x05060000 0x0 0x10000>;
diff --git a/arch/arm64/boot/dts/exynos/Makefile b/arch/arm64/boot/dts/exynos/Makefile
index bdb9e9813e50..bcca63136557 100644
--- a/arch/arm64/boot/dts/exynos/Makefile
+++ b/arch/arm64/boot/dts/exynos/Makefile
@@ -1,4 +1,5 @@
 # SPDX-License-Identifier: GPL-2.0
+subdir-y += axis
 subdir-y += google
 
 dtb-$(CONFIG_ARCH_EXYNOS) += \
diff --git a/arch/arm64/boot/dts/exynos/axis/Makefile b/arch/arm64/boot/dts/exynos/axis/Makefile
new file mode 100644
index 000000000000..ccf00de64016
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/axis/Makefile
@@ -0,0 +1,4 @@
+# SPDX-License-Identifier: GPL-2.0
+
+dtb-$(CONFIG_ARCH_ARTPEC) += \
+	artpec8-grizzly.dtb
diff --git a/arch/arm64/boot/dts/exynos/axis/artpec-pinctrl.h b/arch/arm64/boot/dts/exynos/axis/artpec-pinctrl.h
new file mode 100644
index 000000000000..2c151aa98c96
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/axis/artpec-pinctrl.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: (GPL-2.0 OR MIT) */
+/*
+ * Axis ARTPEC-8 SoC device tree pinctrl constants
+ *
+ * Copyright (c) 2025 Samsung Electronics Co., Ltd.
+ *             https://www.samsung.com
+ * Copyright (c) 2025  Axis Communications AB.
+ *             https://www.axis.com
+ */
+
+#ifndef __DTS_ARM64_SAMSUNG_EXYNOS_AXIS_ARTPEC_PINCTRL_H__
+#define __DTS_ARM64_SAMSUNG_EXYNOS_AXIS_ARTPEC_PINCTRL_H__
+
+#define ARTPEC_PIN_PULL_NONE		0
+#define ARTPEC_PIN_PULL_DOWN		1
+#define ARTPEC_PIN_PULL_UP		3
+
+#define ARTPEC_PIN_FUNC_INPUT		0
+#define ARTPEC_PIN_FUNC_OUTPUT		1
+#define ARTPEC_PIN_FUNC_2		2
+#define ARTPEC_PIN_FUNC_3		3
+#define ARTPEC_PIN_FUNC_4		4
+#define ARTPEC_PIN_FUNC_5		5
+#define ARTPEC_PIN_FUNC_6		6
+#define ARTPEC_PIN_FUNC_EINT		0xf
+#define ARTPEC_PIN_FUNC_F		ARTPEC_PIN_FUNC_EINT
+
+/* Drive strength for ARTPEC */
+#define ARTPEC_PIN_DRV_SR1		0x8
+#define ARTPEC_PIN_DRV_SR2		0x9
+#define ARTPEC_PIN_DRV_SR3		0xa
+#define ARTPEC_PIN_DRV_SR4		0xb
+#define ARTPEC_PIN_DRV_SR5		0xc
+#define ARTPEC_PIN_DRV_SR6		0xd
+
+#endif /* __DTS_ARM64_SAMSUNG_EXYNOS_AXIS_ARTPEC_PINCTRL_H__ */
diff --git a/arch/arm64/boot/dts/exynos/axis/artpec8-grizzly.dts b/arch/arm64/boot/dts/exynos/axis/artpec8-grizzly.dts
new file mode 100644
index 000000000000..5ae864ec3193
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/axis/artpec8-grizzly.dts
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Axis ARTPEC-8 Grizzly board device tree source
+ *
+ * Copyright (c) 2025 Samsung Electronics Co., Ltd.
+ *             https://www.samsung.com
+ * Copyright (c) 2025  Axis Communications AB.
+ *             https://www.axis.com
+ */
+
+/dts-v1/;
+#include "artpec8.dtsi"
+#include "artpec8-pinctrl.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+/ {
+	model = "ARTPEC-8 grizzly board";
+	compatible = "axis,artpec8-grizzly", "axis,artpec8";
+
+	aliases {
+		serial0 = &serial_0;
+	};
+
+	chosen {
+		stdout-path = &serial_0;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x80000000>;
+	};
+};
+
+&osc_clk {
+	clock-frequency = <50000000>;
+};
diff --git a/arch/arm64/boot/dts/exynos/axis/artpec8-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/axis/artpec8-pinctrl.dtsi
new file mode 100644
index 000000000000..8d239a70f1b4
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/axis/artpec8-pinctrl.dtsi
@@ -0,0 +1,120 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Axis ARTPEC-8 SoC pin-mux and pin-config device tree source
+ *
+ * Copyright (c) 2025 Samsung Electronics Co., Ltd.
+ *             https://www.samsung.com
+ * Copyright (c) 2025  Axis Communications AB.
+ *             https://www.axis.com
+ */
+
+#include "artpec-pinctrl.h"
+
+&pinctrl_fsys {
+	gpe0: gpe0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe1: gpe1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpe2: gpe2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf0: gpf0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf1: gpf1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf2: gpf2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf3: gpf3-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpf4: gpf4-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gps0: gps0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gps1: gps1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	serial0_bus: serial0-bus-pins {
+		samsung,pins = "gpf4-4", "gpf4-5";
+		samsung,pin-function = <ARTPEC_PIN_FUNC_2>;
+		samsung,pin-pud = <ARTPEC_PIN_PULL_UP>;
+		samsung,pin-drv = <ARTPEC_PIN_DRV_SR3>;
+	};
+};
+
+&pinctrl_peric {
+	gpa0: gpa0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa1: gpa1-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpa2: gpa2-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+
+	gpk0: gpk0-gpio-bank {
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/axis/artpec8.dtsi b/arch/arm64/boot/dts/exynos/axis/artpec8.dtsi
new file mode 100644
index 000000000000..db9833297982
--- /dev/null
+++ b/arch/arm64/boot/dts/exynos/axis/artpec8.dtsi
@@ -0,0 +1,244 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Axis ARTPEC-8 SoC device tree source
+ *
+ * Copyright (c) 2025 Samsung Electronics Co., Ltd.
+ *             https://www.samsung.com
+ * Copyright (c) 2025  Axis Communications AB.
+ *             https://www.axis.com
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/axis,artpec8-clk.h>
+
+/ {
+	compatible = "axis,artpec8";
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		pinctrl0 = &pinctrl_fsys;
+		pinctrl1 = &pinctrl_peric;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x0>;
+			enable-method = "psci";
+			cpu-idle-states = <&cpu_sleep>;
+			clocks = <&cmu_cpucl CLK_GOUT_CPUCL_CLUSTER_CPU>;
+			clock-names = "cpu";
+		};
+
+		cpu1: cpu@1 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x1>;
+			enable-method = "psci";
+			cpu-idle-states = <&cpu_sleep>;
+		};
+
+		cpu2: cpu@2 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x2>;
+			enable-method = "psci";
+			cpu-idle-states = <&cpu_sleep>;
+		};
+
+		cpu3: cpu@3 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a53";
+			reg = <0x3>;
+			enable-method = "psci";
+			cpu-idle-states = <&cpu_sleep>;
+		};
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_sleep: cpu-sleep {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010000>;
+				local-timer-stop;
+				entry-latency-us = <300>;
+				exit-latency-us = <1200>;
+				min-residency-us = <2000>;
+			};
+		};
+	};
+
+	fin_pll: clock-finpll {
+		compatible = "fixed-factor-clock";
+		clocks = <&osc_clk>;
+		#clock-cells = <0>;
+		clock-div = <2>;
+		clock-mult = <1>;
+		clock-output-names = "fin_pll";
+	};
+
+	osc_clk: clock-osc {
+		/* XXTI */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-output-names = "osc_clk";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a53-pmu";
+		interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
+			     <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	soc: soc@0 {
+		compatible = "simple-bus";
+		ranges = <0x0 0x0 0x0 0x17000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		cmu_imem: clock-controller@10010000 {
+			compatible = "axis,artpec8-cmu-imem";
+			reg = <0x10010000 0x4000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&cmu_cmu CLK_DOUT_CMU_IMEM_ACLK>,
+				 <&cmu_cmu CLK_DOUT_CMU_IMEM_JPEG>;
+			clock-names = "fin_pll", "aclk", "jpeg";
+		};
+
+		timer@10040000 {
+			compatible = "axis,artpec8-mct", "samsung,exynos4210-mct";
+			reg = <0x10040000 0x1000>;
+			clocks = <&fin_pll>, <&cmu_imem CLK_GOUT_IMEM_MCT_PCLK>;
+			clock-names = "fin_pll", "mct";
+			interrupts = <GIC_SPI 455 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 457 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 458 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 459 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 460 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 463 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		gic: interrupt-controller@10201000 {
+			compatible = "arm,gic-400";
+			reg = <0x10201000 0x1000>,
+			      <0x10202000 0x2000>,
+			      <0x10204000 0x2000>,
+			      <0x10206000 0x2000>;
+			#interrupt-cells = <3>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+		};
+
+		cmu_cpucl: clock-controller@11410000 {
+			compatible = "axis,artpec8-cmu-cpucl";
+			reg = <0x11410000 0x4000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&cmu_cmu CLK_DOUT_CMU_CPUCL_SWITCH>;
+			clock-names = "fin_pll", "switch";
+		};
+
+		cmu_cmu: clock-controller@12400000 {
+			compatible = "axis,artpec8-cmu-cmu";
+			reg = <0x12400000 0x4000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>;
+			clock-names = "fin_pll";
+		};
+
+		cmu_core: clock-controller@12410000 {
+			compatible = "axis,artpec8-cmu-core";
+			reg = <0x12410000 0x4000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&cmu_cmu CLK_DOUT_CMU_CORE_MAIN>,
+				 <&cmu_cmu CLK_DOUT_CMU_CORE_DLP>;
+			clock-names = "fin_pll", "main", "dlp";
+		};
+
+		cmu_bus: clock-controller@12c10000 {
+			compatible = "axis,artpec8-cmu-bus";
+			reg = <0x12c10000 0x4000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&cmu_cmu CLK_DOUT_CMU_BUS>,
+				 <&cmu_cmu CLK_DOUT_CMU_BUS_DLP>;
+			clock-names = "fin_pll", "bus", "dlp";
+		};
+
+		cmu_peri: clock-controller@16410000 {
+			compatible = "axis,artpec8-cmu-peri";
+			reg = <0x16410000 0x4000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&cmu_cmu CLK_DOUT_CMU_PERI_IP>,
+				 <&cmu_cmu CLK_DOUT_CMU_PERI_AUDIO>,
+				 <&cmu_cmu CLK_DOUT_CMU_PERI_DISP>;
+			clock-names = "fin_pll", "ip", "audio", "disp";
+		};
+
+		pinctrl_peric: pinctrl@165f0000 {
+			compatible = "axis,artpec8-pinctrl";
+			reg = <0x165f0000 0x1000>;
+			interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		cmu_fsys: clock-controller@16c10000 {
+			compatible = "axis,artpec8-cmu-fsys";
+			reg = <0x16c10000 0x4000>;
+			#clock-cells = <1>;
+			clocks = <&fin_pll>,
+				 <&cmu_cmu CLK_DOUT_CMU_FSYS_SCAN0>,
+				 <&cmu_cmu CLK_DOUT_CMU_FSYS_SCAN1>,
+				 <&cmu_cmu CLK_DOUT_CMU_FSYS_BUS>,
+				 <&cmu_cmu CLK_DOUT_CMU_FSYS_IP>;
+			clock-names = "fin_pll", "scan0", "scan1", "bus", "ip";
+		};
+
+		pinctrl_fsys: pinctrl@16c30000 {
+			compatible = "axis,artpec8-pinctrl";
+			reg = <0x16c30000 0x1000>;
+			interrupts = <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		serial_0: serial@16cc0000 {
+			compatible = "axis,artpec8-uart";
+			reg = <0x16cc0000 0x100>;
+			clocks = <&cmu_fsys CLK_GOUT_FSYS_UART0_PCLK>,
+				 <&cmu_fsys CLK_GOUT_FSYS_UART0_SCLK_UART>;
+			clock-names = "uart", "clk_uart_baud0";
+			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&serial0_bus>;
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+	};
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos2200-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos2200-pinctrl.dtsi
index f618ff290604..5877da7baf5c 100644
--- a/arch/arm64/boot/dts/exynos/exynos2200-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos2200-pinctrl.dtsi
@@ -1438,7 +1438,7 @@
 		samsung,pin-drv = <EXYNOS7_PIN_DRV_LV1>;
 	};
 
-	hsi223_bus: hsi2c23-bus-pins {
+	hsi2c23_bus: hsi2c23-bus-pins {
 		samsung,pins = "gpp11-2", "gpp11-3";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_3>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_UP>;
diff --git a/arch/arm64/boot/dts/exynos/exynos2200.dtsi b/arch/arm64/boot/dts/exynos/exynos2200.dtsi
index 6b5ac02d010f..6487ccb58ae7 100644
--- a/arch/arm64/boot/dts/exynos/exynos2200.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos2200.dtsi
@@ -7,6 +7,7 @@
 
 #include <dt-bindings/clock/samsung,exynos2200-cmu.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/soc/samsung,exynos-usi.h>
 
 / {
 	compatible = "samsung,exynos2200";
@@ -221,22 +222,22 @@
 		method = "smc";
 	};
 
-	soc {
+	soc@0 {
 		compatible = "simple-bus";
-		ranges;
+		ranges = <0x0 0x0 0x0 0x20000000>;
 
-		#address-cells = <2>;
-		#size-cells = <2>;
+		#address-cells = <1>;
+		#size-cells = <1>;
 
 		chipid@10000000 {
 			compatible = "samsung,exynos2200-chipid",
 				     "samsung,exynos850-chipid";
-			reg = <0x0 0x10000000 0x0 0x24>;
+			reg = <0x10000000 0x24>;
 		};
 
 		cmu_peris: clock-controller@10020000 {
 			compatible = "samsung,exynos2200-cmu-peris";
-			reg = <0x0 0x10020000 0x0 0x8000>;
+			reg = <0x10020000 0x8000>;
 			#clock-cells = <1>;
 
 			clocks = <&cmu_top CLK_DOUT_TCXO_DIV3>,
@@ -250,7 +251,7 @@
 		mct_peris: timer@10040000 {
 			compatible = "samsung,exynos2200-mct-peris",
 				     "samsung,exynos4210-mct";
-			reg = <0x0 0x10040000 0x0 0x800>;
+			reg = <0x10040000 0x800>;
 			clocks = <&cmu_top CLK_DOUT_TCXO_DIV3>, <&cmu_peris CLK_MOUT_PERIS_GIC>;
 			clock-names = "fin_pll", "mct";
 			interrupts = <GIC_SPI 943 IRQ_TYPE_LEVEL_HIGH 0>,
@@ -270,9 +271,10 @@
 
 		gic: interrupt-controller@10200000 {
 			compatible = "arm,gic-v3";
-			reg = <0x0 0x10200000 0x0 0x10000>,     /* GICD */
-			      <0x0 0x10240000 0x0 0x200000>;    /* GICR * 8 */
+			reg = <0x10200000 0x10000>,     /* GICD */
+			      <0x10240000 0x200000>;    /* GICR * 8 */
 
+			#address-cells = <0>;
 			#interrupt-cells = <4>;
 			interrupt-controller;
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
@@ -294,7 +296,7 @@
 
 		cmu_peric0: clock-controller@10400000 {
 			compatible = "samsung,exynos2200-cmu-peric0";
-			reg = <0x0 0x10400000 0x0 0x8000>;
+			reg = <0x10400000 0x8000>;
 			#clock-cells = <1>;
 
 			clocks = <&xtcxo>,
@@ -306,17 +308,87 @@
 
 		syscon_peric0: syscon@10420000 {
 			compatible = "samsung,exynos2200-peric0-sysreg", "syscon";
-			reg = <0x0 0x10420000 0x0 0x2000>;
+			reg = <0x10420000 0x10000>;
 		};
 
 		pinctrl_peric0: pinctrl@10430000 {
 			compatible = "samsung,exynos2200-pinctrl";
-			reg = <0x0 0x10430000 0x0 0x1000>;
+			reg = <0x10430000 0x1000>;
+		};
+
+		usi4: usi@105000c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x105000c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_USI04>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric0 0x1024>;
+			status = "disabled";
+
+			hsi2c_8: i2c@10500000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10500000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_DOUT_PERIC0_USI04>,
+					 <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c8_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_6: serial@10500000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x10500000 0xc0>;
+				clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+					 <&cmu_peric0 CLK_DOUT_PERIC0_USI04>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart6_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi4_i2c: usi@105100c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x105100c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric0 CLK_DOUT_PERIC0_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric0 0x1024>;
+			status = "disabled";
+
+			hsi2c_9: i2c@10510000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10510000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric0 CLK_DOUT_PERIC0_I2C>,
+					 <&cmu_peric0 CLK_MOUT_PERIC0_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 672 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c9_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
 		};
 
 		cmu_peric1: clock-controller@10700000 {
 			compatible = "samsung,exynos2200-cmu-peric1";
-			reg = <0x0 0x10700000 0x0 0x8000>;
+			reg = <0x10700000 0x8000>;
 			#clock-cells = <1>;
 
 			clocks = <&xtcxo>,
@@ -328,23 +400,304 @@
 
 		syscon_peric1: syscon@10720000 {
 			compatible = "samsung,exynos2200-peric1-sysreg", "syscon";
-			reg = <0x0 0x10720000 0x0 0x2000>;
+			reg = <0x10720000 0x10000>;
 		};
 
 		pinctrl_peric1: pinctrl@10730000 {
 			compatible = "samsung,exynos2200-pinctrl";
-			reg = <0x0 0x10730000 0x0 0x1000>;
+			reg = <0x10730000 0x1000>;
+		};
+
+		usi7: usi@109000c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x109000c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI07>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric1 0x2030>;
+			status = "disabled";
+
+			hsi2c_14: i2c@10900000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10900000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_DOUT_PERIC1_USI07>,
+					 <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c14_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_9: serial@10900000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x10900000 0xc0>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI07>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart9_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi7_i2c: usi@109100c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x109100c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI07_SPI_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric1 0x2034>;
+			status = "disabled";
+
+			hsi2c_15: i2c@10910000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10910000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_DOUT_PERIC1_USI07_SPI_I2C>,
+					 <&cmu_peric1 CLK_MOUT_PERIC0_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c15_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi8: usi@109200c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x109200c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI08>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric1 0x2038>;
+			status = "disabled";
+
+			hsi2c_16: i2c@10920000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10920000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_DOUT_PERIC1_USI08>,
+					 <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c16_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_10: serial@10920000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x10920000 0xc0>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI08>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart10_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi8_i2c: usi@109300c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x109300c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI08_SPI_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric1 0x203c>;
+			status = "disabled";
+
+			hsi2c_17: i2c@10930000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10930000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_DOUT_PERIC1_USI08_SPI_I2C>,
+					 <&cmu_peric1 CLK_MOUT_PERIC0_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c17_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi9: usi@109400c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x109400c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI09>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric1 0x2040>;
+			status = "disabled";
+
+			hsi2c_18: i2c@10940000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10940000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_DOUT_PERIC1_USI09>,
+					 <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c18_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_11: serial@10940000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x10940000 0xc0>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI09>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart11_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi9_i2c: usi@109500c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x109500c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric1 0x2044>;
+			status = "disabled";
+
+			hsi2c_19: i2c@10950000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10950000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_DOUT_PERIC1_I2C>,
+					 <&cmu_peric1 CLK_MOUT_PERIC0_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c19_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi10: usi@109600c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x109600c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_USI10>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric1 0x2048>;
+			status = "disabled";
+
+			hsi2c_20: i2c@10960000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10960000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_DOUT_PERIC1_USI10>,
+					 <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c20_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_12: serial@10960000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x10960000 0xc0>;
+				clocks = <&cmu_peric1 CLK_MOUT_PERIC1_NOC_USER>,
+					 <&cmu_peric1 CLK_DOUT_PERIC1_USI10>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart12_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi10_i2c: usi@109700c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x109700c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric1 CLK_MOUT_PERIC0_NOC_USER>,
+				 <&cmu_peric1 CLK_DOUT_PERIC1_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric1 0x204c>;
+			status = "disabled";
+
+			hsi2c_21: i2c@10970000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x10970000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric1 CLK_DOUT_PERIC1_I2C>,
+					 <&cmu_peric1 CLK_MOUT_PERIC0_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c21_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
 		};
 
 		cmu_hsi0: clock-controller@10a00000 {
 			compatible = "samsung,exynos2200-cmu-hsi0";
-			reg = <0x0 0x10a00000 0x0 0x8000>;
+			reg = <0x10a00000 0x8000>;
 			#clock-cells = <1>;
 		};
 
 		usb32drd: phy@10aa0000 {
 			compatible = "samsung,exynos2200-usb32drd-phy";
-			reg = <0x0 0x10aa0000 0x0 0x10000>;
+			reg = <0x10aa0000 0x10000>;
 
 			clocks = <&cmu_hsi0 CLK_MOUT_HSI0_NOC>;
 			clock-names = "phy";
@@ -360,7 +713,7 @@
 
 		usb_hsphy: phy@10ab0000 {
 			compatible = "samsung,exynos2200-eusb2-phy";
-			reg = <0x0 0x10ab0000 0x0 0x10000>;
+			reg = <0x10ab0000 0x10000>;
 
 			clocks = <&cmu_hsi0 CLK_MOUT_HSI0_USB32DRD>,
 				 <&cmu_hsi0 CLK_MOUT_HSI0_NOC>,
@@ -374,7 +727,7 @@
 
 		usb: usb@10b00000 {
 			compatible = "samsung,exynos2200-dwusb3";
-			ranges = <0x0 0x0 0x10b00000 0x10000>;
+			ranges = <0x0 0x10b00000 0x10000>;
 
 			clocks = <&cmu_hsi0 CLK_MOUT_HSI0_NOC>;
 			clock-names = "link_aclk";
@@ -406,7 +759,7 @@
 
 		cmu_ufs: clock-controller@11000000 {
 			compatible = "samsung,exynos2200-cmu-ufs";
-			reg = <0x0 0x11000000 0x0 0x8000>;
+			reg = <0x11000000 0x8000>;
 			#clock-cells = <1>;
 
 			clocks = <&xtcxo>,
@@ -418,27 +771,27 @@
 
 		syscon_ufs: syscon@11020000 {
 			compatible = "samsung,exynos2200-ufs-sysreg", "syscon";
-			reg = <0x0 0x11020000 0x0 0x2000>;
+			reg = <0x11020000 0x10000>;
 		};
 
 		pinctrl_ufs: pinctrl@11040000 {
 			compatible = "samsung,exynos2200-pinctrl";
-			reg = <0x0 0x11040000 0x0 0x1000>;
+			reg = <0x11040000 0x1000>;
 		};
 
 		pinctrl_hsi1ufs: pinctrl@11060000 {
 			compatible = "samsung,exynos2200-pinctrl";
-			reg = <0x0 0x11060000 0x0 0x1000>;
+			reg = <0x11060000 0x1000>;
 		};
 
 		pinctrl_hsi1: pinctrl@11240000 {
 			compatible = "samsung,exynos2200-pinctrl";
-			reg = <0x0 0x11240000 0x0 0x1000>;
+			reg = <0x11240000 0x1000>;
 		};
 
 		cmu_peric2: clock-controller@11c00000 {
 			compatible = "samsung,exynos2200-cmu-peric2";
-			reg = <0x0 0x11c00000 0x0 0x8000>;
+			reg = <0x11c00000 0x8000>;
 			#clock-cells = <1>;
 
 			clocks = <&xtcxo>,
@@ -450,17 +803,507 @@
 
 		syscon_peric2: syscon@11c20000 {
 			compatible = "samsung,exynos2200-peric2-sysreg", "syscon";
-			reg = <0x0 0x11c20000 0x0 0x4000>;
+			reg = <0x11c20000 0x10000>;
 		};
 
 		pinctrl_peric2: pinctrl@11c30000 {
 			compatible = "samsung,exynos2200-pinctrl";
-			reg = <0x0 0x11c30000 0x0 0x1000>;
+			reg = <0x11c30000 0x1000>;
+		};
+
+		usi0: usi@11d000c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11d000c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_USI00>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric2 0x2000>;
+			status = "disabled";
+
+			hsi2c_0: i2c@11d00000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11d00000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI00>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 704 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c0_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_2: serial@11d00000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x11d00000 0xc0>;
+				clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+					 <&cmu_peric2 CLK_DOUT_PERIC2_USI00>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 704 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart2_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi0_i2c: usi@11d100c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11d100c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_USI00_SPI_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric2 0x2004>;
+			status = "disabled";
+
+			hsi2c_1: i2c@11d10000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11d10000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI00_SPI_I2C>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 703 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c1_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi1: usi@11d200c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11d200c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_USI01>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric2 0x2008>;
+			status = "disabled";
+
+			hsi2c_2: i2c@11d20000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11d20000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI01>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c2_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_3: serial@11d20000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x11d20000 0xc0>;
+				clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+					 <&cmu_peric2 CLK_DOUT_PERIC2_USI01>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart3_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi1_i2c: usi@11d300c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11d300c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_USI01_SPI_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric2 0x200c>;
+			status = "disabled";
+
+			hsi2c_3: i2c@11d30000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11d30000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI01_SPI_I2C>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 705 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c3_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi2: usi@11d400c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11d400c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_USI02>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric2 0x2010>;
+			status = "disabled";
+
+			hsi2c_4: i2c@11d40000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11d40000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI02>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c4_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_4: serial@11d40000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x11d40000 0xc0>;
+				clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+					 <&cmu_peric2 CLK_DOUT_PERIC2_USI02>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 708 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart4_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <256>;
+				status = "disabled";
+			};
+		};
+
+		usi2_i2c: usi@11d500c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11d500c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric2 0x2014>;
+			status = "disabled";
+
+			hsi2c_5: i2c@11d50000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11d50000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_I2C>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 707 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c5_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi3: usi@11d600c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11d600c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_USI03>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric2 0x2018>;
+			status = "disabled";
+
+			hsi2c_6: i2c@11d60000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11d60000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI03>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c6_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_5: serial@11d60000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x11d60000 0xc0>;
+				clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+					 <&cmu_peric2 CLK_DOUT_PERIC2_USI03>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 710 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart5_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <256>;
+				status = "disabled";
+			};
+		};
+
+		usi3_i2c: usi@11d700c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11d700c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric2 0x201c>;
+			status = "disabled";
+
+			hsi2c_7: i2c@11d70000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11d70000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_I2C>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 709 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c7_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi5_i2c: usi@11d800c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11d800c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric2 0x102c>;
+			status = "disabled";
+
+			hsi2c_11: i2c@11d80000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11d80000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_I2C>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 711 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c11_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi6_i2c: usi@11d900c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11d900c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric2 0x1004>;
+			status = "disabled";
+
+			hsi2c_13: i2c@11d90000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11d90000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_I2C>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 713 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c13_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi11: usi@11da00c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11da00c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_USI11>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric2 0x1058>;
+			status = "disabled";
+
+			hsi2c_22: i2c@11da0000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11da0000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI11>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c22_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_13: serial@11da0000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x11da0000 0xc0>;
+				clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+					 <&cmu_peric2 CLK_DOUT_PERIC2_USI11>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 716 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart13_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi11_i2c: usi@11db00c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11db00c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_peric2 0x105c>;
+			status = "disabled";
+
+			hsi2c_23: i2c@11db0000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11db0000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_I2C>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 715 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c23_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi5: usi@11dd00c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11dd00c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_USI05>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric2 0x117c>;
+			status = "disabled";
+
+			hsi2c_10: i2c@11dd0000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11dd0000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI05>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 538 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c10_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_7: serial@11dd0000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x11dd0000 0xc0>;
+				clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+					 <&cmu_peric2 CLK_DOUT_PERIC2_USI05>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 538 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart7_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <256>;
+				status = "disabled";
+			};
+		};
+
+		usi6: usi@11de00c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x11de00c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+				 <&cmu_peric2 CLK_DOUT_PERIC2_USI06>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_peric2 0x1180>;
+			status = "disabled";
+
+			hsi2c_12: i2c@11de0000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x11de0000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_peric2 CLK_DOUT_PERIC2_USI06>,
+					 <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 539 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c12_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_8: serial@11de0000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x11de0000 0xc0>;
+				clocks = <&cmu_peric2 CLK_MOUT_PERIC2_NOC_USER>,
+					 <&cmu_peric2 CLK_DOUT_PERIC2_USI06>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 539 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart8_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
 		};
 
 		cmu_cmgp: clock-controller@14e00000 {
 			compatible = "samsung,exynos2200-cmu-cmgp";
-			reg = <0x0 0x14e00000 0x0 0x8000>;
+			reg = <0x14e00000 0x8000>;
 			#clock-cells = <1>;
 
 			clocks = <&xtcxo>,
@@ -471,12 +1314,12 @@
 
 		syscon_cmgp: syscon@14e20000 {
 			compatible = "samsung,exynos2200-cmgp-sysreg", "syscon";
-			reg = <0x0 0x14e20000 0x0 0x2000>;
+			reg = <0x14e20000 0x10000>;
 		};
 
 		pinctrl_cmgp: pinctrl@14e30000 {
 			compatible = "samsung,exynos2200-pinctrl";
-			reg = <0x0 0x14e30000 0x0 0x1000>;
+			reg = <0x14e30000 0x1000>;
 
 			wakeup-interrupt-controller {
 				compatible = "samsung,exynos2200-wakeup-eint",
@@ -485,9 +1328,528 @@
 			};
 		};
 
+		usi_cmgp0: usi@14f000c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14f000c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_USI0>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_cmgp 0x2000>;
+			status = "disabled";
+
+			hsi2c_24: i2c@14f00000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14f00000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_USI0>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c24_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_14: serial@14f00000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x14f00000 0xc0>;
+				clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+					 <&cmu_cmgp CLK_DOUT_CMGP_USI0>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 175 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart14_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_cmgp0: usi@14f100c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14f100c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_SPI_I2C0>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_cmgp 0x2070>;
+			status = "disabled";
+
+			hsi2c_25: i2c@14f10000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14f10000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_SPI_I2C0>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 173 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c25_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi_cmgp1: usi@14f200c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14f200c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_USI1>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_cmgp 0x2010>;
+			status = "disabled";
+
+			hsi2c_26: i2c@14f20000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14f20000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_USI1>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c26_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_15: serial@14f20000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x14f20000 0xc0>;
+				clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+					 <&cmu_cmgp CLK_DOUT_CMGP_USI1>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart15_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_cmgp1: usi@14f300c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14f300c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_SPI_I2C1>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_cmgp 0x2074>;
+			status = "disabled";
+
+			hsi2c_27: i2c@14f30000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14f30000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_SPI_I2C1>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c27_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi_cmgp2: usi@14f400c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14f400c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_USI2>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_cmgp 0x2020>;
+			status = "disabled";
+
+			hsi2c_28: i2c@14f40000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14f40000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_USI2>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c28_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_16: serial@14f40000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x14f40000 0xc0>;
+				clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+					 <&cmu_cmgp CLK_DOUT_CMGP_USI2>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 177 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart16_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_cmgp2: usi@14f500c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14f500c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_cmgp 0x2024>;
+			status = "disabled";
+
+			hsi2c_29: i2c@14f50000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14f50000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_I2C>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 167 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c29_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi_cmgp3: usi@14f600c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14f600c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_USI3>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_cmgp 0x2030>;
+			status = "disabled";
+
+			hsi2c_30: i2c@14f60000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14f60000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_USI3>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c30_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_17: serial@14f60000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x14f60000 0xc0>;
+				clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+					 <&cmu_cmgp CLK_DOUT_CMGP_USI3>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 178 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart17_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_cmgp3: usi@14f700c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14f700c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_cmgp 0x2034>;
+			status = "disabled";
+
+			hsi2c_31: i2c@14f70000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14f70000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_I2C>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c31_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi_cmgp4: usi@14f800c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14f800c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_USI4>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_cmgp 0x2040>;
+			status = "disabled";
+
+			hsi2c_32: i2c@14f80000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14f80000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_USI4>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c32_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_18: serial@14f80000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x14f80000 0xc0>;
+				clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+					 <&cmu_cmgp CLK_DOUT_CMGP_USI4>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart18_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_cmgp4: usi@14f900c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14f900c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_cmgp 0x2044>;
+			status = "disabled";
+
+			hsi2c_33: i2c@14f90000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14f90000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_I2C>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c33_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi_cmgp5: usi@14fa00c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14fa00c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_USI5>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_cmgp 0x2050>;
+			status = "disabled";
+
+			hsi2c_34: i2c@14fa0000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14fa0000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_USI5>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c34_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_19: serial@14fa0000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x14fa0000 0xc0>;
+				clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+					 <&cmu_cmgp CLK_DOUT_CMGP_USI5>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart19_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_cmgp5: usi@14fb00c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14fb00c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_cmgp 0x2054>;
+			status = "disabled";
+
+			hsi2c_35: i2c@14fb0000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14fb0000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_I2C>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c35_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi_cmgp6: usi@14fc00c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14fc00c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_USI6>;
+			clock-names = "pclk", "ipclk";
+			samsung,sysreg = <&syscon_cmgp 0x2060>;
+			status = "disabled";
+
+			hsi2c_36: i2c@14fc0000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14fc0000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_USI6>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c36_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+
+			serial_20: serial@14fc0000 {
+				compatible = "samsung,exynos2200-uart", "google,gs101-uart";
+				reg = <0x14fc0000 0xc0>;
+				clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+					 <&cmu_cmgp CLK_DOUT_CMGP_USI6>;
+				clock-names = "uart", "clk_uart_baud0";
+				interrupts = <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&uart20_bus_single>;
+				pinctrl-names = "default";
+				samsung,uart-fifosize = <64>;
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_cmgp6: usi@14fd00c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14fd00c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_cmgp 0x2064>;
+			status = "disabled";
+
+			hsi2c_37: i2c@14fd0000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14fd0000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_I2C>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c37_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
+		usi_i2c_cmgp7: usi@14fe00c0 {
+			compatible = "samsung,exynos2200-usi", "samsung,exynos850-usi";
+			reg = <0x14fe00c0 0x20>;
+			ranges;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			clocks = <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>,
+				 <&cmu_cmgp CLK_DOUT_CMGP_I2C>;
+			clock-names = "pclk", "ipclk";
+			samsung,mode = <USI_MODE_I2C>;
+			samsung,sysreg = <&syscon_cmgp 0x2080>;
+			status = "disabled";
+
+			hsi2c_38: i2c@14fe0000 {
+				compatible = "samsung,exynos2200-hsi2c",
+					     "samsung,exynosautov9-hsi2c";
+				reg = <0x14fe0000 0xc0>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				clocks = <&cmu_cmgp CLK_DOUT_CMGP_I2C>,
+					 <&cmu_cmgp CLK_MOUT_CMGP_CLKALIVE_NOC_USER>;
+				clock-names = "hsi2c", "hsi2c_pclk";
+				interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH 0>;
+				pinctrl-0 = <&hsi2c38_bus>;
+				pinctrl-names = "default";
+				status = "disabled";
+			};
+		};
+
 		cmu_vts: clock-controller@15300000 {
 			compatible = "samsung,exynos2200-cmu-vts";
-			reg = <0x0 0x15300000 0x0 0x8000>;
+			reg = <0x15300000 0x8000>;
 			#clock-cells = <1>;
 
 			clocks = <&xtcxo>,
@@ -497,12 +1859,12 @@
 
 		pinctrl_vts: pinctrl@15320000 {
 			compatible = "samsung,exynos2200-pinctrl";
-			reg = <0x0 0x15320000 0x0 0x1000>;
+			reg = <0x15320000 0x1000>;
 		};
 
 		cmu_alive: clock-controller@15800000 {
 			compatible = "samsung,exynos2200-cmu-alive";
-			reg = <0x0 0x15800000 0x0 0x8000>;
+			reg = <0x15800000 0x8000>;
 			#clock-cells = <1>;
 
 			clocks = <&xtcxo>,
@@ -512,7 +1874,7 @@
 
 		pinctrl_alive: pinctrl@15850000 {
 			compatible = "samsung,exynos2200-pinctrl";
-			reg = <0x0 0x15850000 0x0 0x1000>;
+			reg = <0x15850000 0x1000>;
 
 			wakeup-interrupt-controller {
 				compatible = "samsung,exynos2200-wakeup-eint",
@@ -524,7 +1886,7 @@
 		pmu_system_controller: system-controller@15860000 {
 			compatible = "samsung,exynos2200-pmu",
 				     "samsung,exynos7-pmu", "syscon";
-			reg = <0x0 0x15860000 0x0 0x10000>;
+			reg = <0x15860000 0x10000>;
 
 			reboot: syscon-reboot {
 				compatible = "syscon-reboot";
@@ -536,7 +1898,7 @@
 
 		cmu_top: clock-controller@1a320000 {
 			compatible = "samsung,exynos2200-cmu-top";
-			reg = <0x0 0x1a320000 0x0 0x8000>;
+			reg = <0x1a320000 0x8000>;
 			#clock-cells = <1>;
 
 			clocks = <&xtcxo>;
diff --git a/arch/arm64/boot/dts/exynos/exynos5433.dtsi b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
index 0b9053b9b2b5..fa2029e280a5 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos5433.dtsi
@@ -937,6 +937,7 @@
 
 		gic: interrupt-controller@11001000 {
 			compatible = "arm,gic-400";
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			reg = <0x11001000 0x1000>,
diff --git a/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts b/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts
index 7d70a32e75b2..ab076d326a49 100644
--- a/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts
+++ b/arch/arm64/boot/dts/exynos/exynos850-e850-96.dts
@@ -21,6 +21,7 @@
 	compatible = "winlink,e850-96", "samsung,exynos850";
 
 	aliases {
+		ethernet0 = &ethernet;
 		mmc0 = &mmc_0;
 		serial0 = &serial_0;
 	};
@@ -241,10 +242,24 @@
 };
 
 &usbdrd_dwc3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
 	dr_mode = "otg";
 	usb-role-switch;
 	role-switch-default-mode = "host";
 
+	hub@1 {
+		compatible = "usb424,9514";
+		reg = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethernet: ethernet@1 {
+			compatible = "usb424,ec00";
+			reg = <1>;
+		};
+	};
+
 	port {
 		usb1_drd_sw: endpoint {
 			remote-endpoint = <&usb_dr_connector>;
diff --git a/arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi b/arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi
index 51e9c9c4b166..16903ce63a32 100644
--- a/arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos8895-pinctrl.dtsi
@@ -202,7 +202,7 @@
 	};
 
 	bt_en: bt-en-pins {
-		samsung,pins ="gpj1-7";
+		samsung,pins = "gpj1-7";
 		samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
 		samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
 		samsung,pin-con-pdn = <EXYNOS_PIN_PDN_PREV>;
diff --git a/arch/arm64/boot/dts/exynos/exynos990-c1s.dts b/arch/arm64/boot/dts/exynos/exynos990-c1s.dts
index 36a6f1377e92..9f0ad4f9673a 100644
--- a/arch/arm64/boot/dts/exynos/exynos990-c1s.dts
+++ b/arch/arm64/boot/dts/exynos/exynos990-c1s.dts
@@ -44,6 +44,12 @@
 		      <0x8 0x80000000 0x1 0x7ec00000>;
 	};
 
+	/* TODO: Remove this once PMIC is implemented */
+	reg_dummy: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "dummy_reg";
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -113,3 +119,13 @@
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
+
+&usbdrd {
+	status = "okay";
+	vdd10-supply = <&reg_dummy>;
+	vdd33-supply = <&reg_dummy>;
+};
+
+&usbdrd_phy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos990-r8s.dts b/arch/arm64/boot/dts/exynos/exynos990-r8s.dts
index 6bae3c0ecc1c..55342db61979 100644
--- a/arch/arm64/boot/dts/exynos/exynos990-r8s.dts
+++ b/arch/arm64/boot/dts/exynos/exynos990-r8s.dts
@@ -44,6 +44,12 @@
 		      <0x8 0x80000000 0x0 0xc0000000>;
 	};
 
+	/* TODO: Remove this once PMIC is implemented */
+	reg_dummy: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "dummy_reg";
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -113,3 +119,13 @@
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
+
+&usbdrd {
+	status = "okay";
+	vdd10-supply = <&reg_dummy>;
+	vdd33-supply = <&reg_dummy>;
+};
+
+&usbdrd_phy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos990-x1s-common.dtsi b/arch/arm64/boot/dts/exynos/exynos990-x1s-common.dtsi
index 55fa8e9e05db..7b97220cccb7 100644
--- a/arch/arm64/boot/dts/exynos/exynos990-x1s-common.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos990-x1s-common.dtsi
@@ -27,6 +27,12 @@
 		};
 	};
 
+	/* TODO: Remove this once PMIC is implemented */
+	reg_dummy: regulator-0 {
+		compatible = "regulator-fixed";
+		regulator-name = "dummy_reg";
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -96,3 +102,13 @@
 		samsung,pin-drv = <EXYNOS5420_PIN_DRV_LV1>;
 	};
 };
+
+&usbdrd {
+	status = "okay";
+	vdd10-supply = <&reg_dummy>;
+	vdd33-supply = <&reg_dummy>;
+};
+
+&usbdrd_phy {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/exynos/exynos990.dtsi b/arch/arm64/boot/dts/exynos/exynos990.dtsi
index dd7f99f51a75..7179109c49d0 100644
--- a/arch/arm64/boot/dts/exynos/exynos990.dtsi
+++ b/arch/arm64/boot/dts/exynos/exynos990.dtsi
@@ -211,6 +211,30 @@
 				     <GIC_SPI 477 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		watchdog_cl0: watchdog@10050000 {
+			compatible = "samsung,exynos990-wdt";
+			reg = <0x10050000 0x100>;
+			interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peris CLK_GOUT_PERIS_WDT_CLUSTER0_PCLK>,
+				 <&oscclk>;
+			clock-names = "watchdog",
+				      "watchdog_src";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			samsung,cluster-index = <0>;
+		};
+
+		watchdog_cl2: watchdog@10060000 {
+			compatible = "samsung,exynos990-wdt";
+			reg = <0x10060000 0x100>;
+			interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cmu_peris CLK_GOUT_PERIS_WDT_CLUSTER2_PCLK>,
+				 <&oscclk>;
+			clock-names = "watchdog",
+				      "watchdog_src";
+			samsung,syscon-phandle = <&pmu_system_controller>;
+			samsung,cluster-index = <2>;
+		};
+
 		gic: interrupt-controller@10101000 {
 			compatible = "arm,gic-400";
 			reg = <0x10101000 0x1000>,
@@ -225,12 +249,34 @@
 			#size-cells = <1>;
 		};
 
+		cmu_peric0: clock-controller@10400000 {
+			compatible = "samsung,exynos990-cmu-peric0";
+			reg = <0x10400000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC0_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC0_IP>;
+			clock-names = "oscclk", "bus", "ip";
+		};
+
 		pinctrl_peric0: pinctrl@10430000 {
 			compatible = "samsung,exynos990-pinctrl";
 			reg = <0x10430000 0x1000>;
 			interrupts = <GIC_SPI 392 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		cmu_peric1: clock-controller@10700000 {
+			compatible = "samsung,exynos990-cmu-peric1";
+			reg = <0x10700000 0x8000>;
+			#clock-cells = <1>;
+
+			clocks = <&oscclk>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_BUS>,
+				 <&cmu_top CLK_DOUT_CMU_PERIC1_IP>;
+			clock-names = "oscclk", "bus", "ip";
+		};
+
 		pinctrl_peric1: pinctrl@10730000 {
 			compatible = "samsung,exynos990-pinctrl";
 			reg = <0x10730000 0x1000>;
@@ -254,6 +300,37 @@
 				      "dpgtc";
 		};
 
+		usbdrd_phy: phy@10c00000 {
+			compatible = "samsung,exynos990-usbdrd-phy";
+			reg = <0x10c00000 0x100>;
+			clocks = <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_ACLK_PHYCTRL>,
+				 <&oscclk>;
+			clock-names = "phy", "ref";
+			samsung,pmu-syscon = <&pmu_system_controller>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
+		usbdrd: usb@10e00000 {
+			compatible = "samsung,exynos990-dwusb3",
+				     "samsung,exynos850-dwusb3";
+			ranges = <0x0 0x10e00000 0x10000>;
+			clocks = <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_BUS_CLK_EARLY>,
+				 <&cmu_hsi0 CLK_GOUT_HSI0_USB31DRD_USB31DRD_REF_CLK_40>;
+			clock-names = "bus_early", "ref";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			status = "disabled";
+
+			usbdrd_dwc3: usb@0 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0x10000>;
+				interrupts = <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>;
+				phys = <&usbdrd_phy 0>;
+				phy-names = "usb2-phy";
+			};
+		};
+
 		pinctrl_hsi1: pinctrl@13040000 {
 			compatible = "samsung,exynos990-pinctrl";
 			reg = <0x13040000 0x1000>;
diff --git a/arch/arm64/boot/dts/exynos/google/gs101.dtsi b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
index c0f8c25861a9..31c99526470d 100644
--- a/arch/arm64/boot/dts/exynos/google/gs101.dtsi
+++ b/arch/arm64/boot/dts/exynos/google/gs101.dtsi
@@ -341,6 +341,7 @@
 
 		gic: interrupt-controller@10400000 {
 			compatible = "arm,gic-v3";
+			#address-cells = <0>;
 			#interrupt-cells = <4>;
 			interrupt-controller;
 			reg = <0x10400000 0x10000>, /* GICD */
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index 23535ed47631..525ef180481d 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -5,6 +5,8 @@ dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-frwy.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-oxalis.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-qds.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-rdb.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-tqmls1012al-mbls1012al.dtb
+dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1012a-tqmls1012al-mbls1012al-emmc.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-kbox-a-230-ls.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28.dtb
 dtb-$(CONFIG_ARCH_LAYERSCAPE) += fsl-ls1028a-kontron-sl28-var1.dtb
@@ -194,6 +196,7 @@ imx8mp-aristainetos3-helios-lvds-dtbs += imx8mp-aristainetos3-helios.dtb imx8mp-
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-aristainetos3-helios-lvds.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-aristainetos3-proton2s.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-beacon-kit.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-cubox-m.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-data-modul-edm-sbc.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-debix-model-a.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-debix-som-a-bmb-08.dtb
@@ -201,7 +204,12 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-drc02.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-pdk3.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-dhcom-picoitx.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-edm-g-wb.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-hummingboard-mate.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-hummingboard-pro.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-hummingboard-pulse.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-hummingboard-ripple.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-iota2-lumpy.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-kontron-bl-osm-s.dtb
@@ -237,6 +245,7 @@ imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17-dtbs += imx8mp-tx8p-ml81-modu
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-tx8p-ml81-moduline-display-106-av101hdt-a10.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-tx8p-ml81-moduline-display-106-av123z7m-n17.dtb
 
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-ultra-mach-sbc.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-var-som-symphony.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw71xx-2x.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw72xx-2x.dtb
@@ -332,7 +341,10 @@ dtb-${CONFIG_ARCH_MXC} += imx8qxp-mek-ov5640-csi.dtb
 
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-tqma8xqp-mba8xx.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8qxp-tqma8xqps-mb-smarc-2.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8ulp-9x9-evk.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx8ulp-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx91-11x11-evk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx91-tqma9131-mba91xxca.dtb
 dtb-$(CONFIG_ARCH_MXC) += imx93-9x9-qsb.dtb
 
 imx93-9x9-qsb-i3c-dtbs += imx93-9x9-qsb.dtb imx93-9x9-qsb-i3c.dtbo
@@ -371,8 +383,10 @@ dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-evk-pcie0-ep.dtb imx95-19x19-evk-pcie1-ep.
 dtb-$(CONFIG_ARCH_MXC) += imx95-libra-rdk-fpsc.dtb
 
 imx8mm-kontron-dl-dtbs			:= imx8mm-kontron-bl.dtb imx8mm-kontron-dl.dtbo
+imx8mm-kontron-bl-lte-dtbs		:= imx8mm-kontron-bl.dtb imx8mm-kontron-bl-lte.dtbo
 
 dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-dl.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mm-kontron-bl-lte.dtb
 
 imx8mm-venice-gw72xx-0x-imx219-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-imx219.dtbo
 imx8mm-venice-gw72xx-0x-rpidsi-dtbs	:= imx8mm-venice-gw72xx-0x.dtb imx8mm-venice-gw72xx-0x-rpidsi.dtbo
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al-mbls1012al-emmc.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al-mbls1012al-emmc.dts
new file mode 100644
index 000000000000..07026b067320
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al-mbls1012al-emmc.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Matthias Schiffer
+ * Author: Max Merchel
+ */
+
+#include "fsl-ls1012a-tqmls1012al-mbls1012al.dts"
+
+&esdhc0 {
+	vqmmc-supply = <&reg_1v8>;
+	/delete-property/ no-mmc;
+	/delete-property/ sd-uhs-sdr12;
+	/delete-property/ sd-uhs-sdr25;
+	/delete-property/ sd-uhs-sdr50;
+	/delete-property/ sd-uhs-sdr104;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	no-sd;
+	voltage-ranges = <1800 1800>;
+	non-removable;
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al-mbls1012al.dts b/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al-mbls1012al.dts
new file mode 100644
index 000000000000..e46cc1a07f0c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al-mbls1012al.dts
@@ -0,0 +1,366 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Matthias Schiffer
+ * Author: Max Merchel
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include "fsl-ls1012a-tqmls1012al.dtsi"
+
+/ {
+	model = "TQ-Systems TQMLS1012AL on MBLS1012AL";
+	compatible = "tq,ls1012a-tqmls1012al-mbls1012al", "tq,ls1012a-tqmls1012al", "fsl,ls1012a";
+	chassis-type = "embedded";
+
+	aliases {
+		/* use MAC from U-Boot environment */
+		/* TODO: PFE */
+		ethernet2 = &swport0;
+		ethernet3 = &swport1;
+		ethernet4 = &swport2;
+		ethernet5 = &swport3;
+		serial0 = &duart0;
+		spi0 = &qspi;
+	};
+
+	chosen {
+		stdout-path = &duart0;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		switch-1 {
+			label = "S2";
+			linux,code = <BTN_0>;
+			gpios = <&gpio_exp_3p3v 13 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-2 {
+			label = "X15";
+			linux,code = <BTN_1>;
+			gpios = <&gpio_exp_1p8v 5 GPIO_ACTIVE_LOW>;
+		};
+
+		switch-3 {
+			label = "X16";
+			linux,code = <BTN_2>;
+			gpios = <&gpio_exp_1p8v 4 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&gpio_exp_3p3v 14 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio_exp_3p3v 15 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* global autoconfigured region for contiguous allocations */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			/* 64 MiB */
+			size = <0 0x04000000>;
+			/*  512 - 128 MiB, our minimum RAM config will be 512 MiB */
+			alloc-ranges = <0 0x80000000 0 0x98000000>;
+			linux,cma-default;
+		};
+	};
+
+	reg_1v5: regulator-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V5";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+	};
+
+	reg_1p5v_pcie: regulator-1p5v-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V5_PCIE";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio_exp_1p8v 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_1v5>;
+	};
+
+	reg_1p5v_wlan: regulator-1p5v-wlan {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V5_WLAN";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio_exp_1p8v 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_1v5>;
+	};
+
+	reg_1v8: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_3v3: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "3P3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_3v3_pcie: regulator-3v3-pcie {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_PCIE";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio_exp_3p3v 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_3v3>;
+	};
+
+	reg_3v3_wlan: regulator-3v3-wlan {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_WLAN";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+		gpio = <&gpio_exp_3p3v 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		vin-supply = <&reg_3v3>;
+	};
+};
+
+&duart0 {
+	status = "okay";
+};
+
+&esdhc0 {
+	vmmc-supply = <&reg_3v3>;
+	no-mmc;
+	no-sdio;
+	disable-wp;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&i2c0 {
+	gpio_exp_3p3v: gpio@20 {
+		compatible = "nxp,pca9555";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3v3>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <24 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-line-names = "", "", "GPIO_3V3_3", "",
+				  "", "", "", "",
+				  "", "GPIO_3V3_1", "GPIO_3V3_2", "",
+				  "", "", "", "";
+
+		wlan-disable-hog {
+			gpio-hog;
+			gpios = <0 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "WLAN_DISABLE#";
+		};
+
+		pcie-rst-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "PCIE_RST#";
+		};
+
+		wlan-rst-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "WLAN_RST#";
+		};
+
+		pcie-dis-hog {
+			gpio-hog;
+			gpios = <11 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "PCIE_DIS#";
+		};
+
+		pcie-wake-hog {
+			gpio-hog;
+			gpios = <12 GPIO_ACTIVE_HIGH>;
+			input;
+			line-name = "PCIE_WAKE#";
+		};
+	};
+
+	lm75_48: temperature-sensor@48 {
+		compatible = "national,lm75a";
+		reg = <0x48>;
+		vs-supply = <&reg_3v3>;
+	};
+
+	switch@5f {
+		compatible = "microchip,ksz9897";
+		reg = <0x5f>;
+		reset-gpios = <&gpio_exp_3p3v 7 GPIO_ACTIVE_LOW>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			swport0: port@0 {
+				reg = <0>;
+				label = "swp0";
+				phy-mode = "internal";
+			};
+
+			swport1: port@1 {
+				reg = <1>;
+				label = "swp1";
+				phy-mode = "internal";
+			};
+
+			swport2: port@2 {
+				reg = <2>;
+				label = "swp2";
+				phy-mode = "internal";
+			};
+
+			swport3: port@3 {
+				reg = <3>;
+				label = "swp3";
+				phy-mode = "internal";
+			};
+
+			port@6 {
+				reg = <6>;
+				label = "cpu";
+				/* TODO: PFE */
+				phy-mode = "rgmii-id";
+				rx-internal-delay-ps = <1500>;
+				tx-internal-delay-ps = <1500>;
+
+				fixed-link {
+					speed = <1000>;
+					full-duplex;
+				};
+			};
+		};
+	};
+
+	gpio_exp_1p8v: gpio@70 {
+		compatible = "nxp,pca9538";
+		reg = <0x70>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_1v8>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-line-names = "PCIE_CLK_PD#", "PMIC_INT#", "ETH_SW_INT#", "",
+				  "", "", "", "",
+				  "", "GPIO_3V3_1", "GPIO_3V3_2", "",
+				  "", "", "", "";
+
+		/* do not change PCIE_CLK_PD */
+		pcie-clk-pd-hog {
+			gpio-hog;
+			gpios = <0 GPIO_ACTIVE_HIGH>;
+			output-high;
+			line-name = "PCIE_CLK_PD#";
+		};
+
+		pmic-int-hog {
+			gpio-hog;
+			gpios = <1 GPIO_ACTIVE_HIGH>;
+			input;
+			line-name = "PMIC_INT#";
+		};
+
+		eth-sw-int-hog {
+			gpio-hog;
+			gpios = <2 GPIO_ACTIVE_HIGH>;
+			input;
+			line-name = "ETH_SW_INT#";
+		};
+
+		eth-link-pwrdwn-hog {
+			gpio-hog;
+			gpios = <3 GPIO_ACTIVE_HIGH>;
+			input;
+			line-name = "ETH_LINK_PWRDWN#";
+		};
+	};
+};
+
+&pcie1 {
+	status = "okay";
+};
+
+/* TODO: PFE */
+
+&sata {
+	status = "okay";
+};
+
+&usb0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	hub_2_0: hub@1 {
+		compatible = "usb451,8142";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&gpio_exp_3p3v 6 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_vcc_3v3>;
+	};
+
+	hub_3_0: hub@2 {
+		compatible = "usb451,8140";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&gpio_exp_3p3v 6 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_vcc_3v3>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al.dtsi
new file mode 100644
index 000000000000..7c5a3dee91b9
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a-tqmls1012al.dtsi
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2018-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Matthias Schiffer
+ * Author: Max Merchel
+ */
+
+#include "fsl-ls1012a.dtsi"
+
+/ {
+	compatible = "tq,ls1012a-tqmls1012al", "fsl,ls1012a";
+
+	memory@80000000 {
+		device_type = "memory";
+		/*  our minimum RAM config will be 512 MiB */
+		reg = <0x00000000 0x80000000 0 0x20000000>;
+	};
+
+	reg_vcc_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_1V8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	reg_vcc_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "VCC_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+
+	jc42_19: temperature-sensor@19 {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x19>;
+	};
+
+	m24c64_50: eeprom@50 {
+		compatible = "atmel,24c64";
+		reg = <0x50>;
+		pagesize = <32>;
+		vcc-supply = <&reg_vcc_3v3>;
+	};
+
+	m24c02_51: eeprom@51 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&reg_vcc_3v3>;
+	};
+
+	rtc1: rtc@68 {
+		compatible = "dallas,ds1339";
+		reg = <0x68>;
+	};
+};
+
+&qspi {
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <39000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <1>;
+		vcc-supply = <&reg_vcc_1v8>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index dd479889658d..fc3e138077b8 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -87,6 +87,7 @@
 
 	gic: interrupt-controller@1400000 {
 		compatible = "arm,gic-400";
+		#address-cells = <0>;
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0x0 0x1401000 0 0x1000>, /* GICD */
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
index 26bea88cb967..73315c517039 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1043a.dtsi
@@ -289,6 +289,7 @@
 
 	gic: interrupt-controller@1400000 {
 		compatible = "arm,gic-400";
+		#address-cells = <0>;
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0x0 0x1401000 0 0x1000>, /* GICD */
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index 4a22fde38bea..770d91ef0310 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -260,6 +260,7 @@
 
 	gic: interrupt-controller@1400000 {
 		compatible = "arm,gic-400";
+		#address-cells = <0>;
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		reg = <0x0 0x1410000 0 0x10000>, /* GICD */
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
index e4b727070814..eec2cd6c6d32 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-cex7.dtsi
@@ -41,6 +41,7 @@
 	rgmii_phy1: ethernet-phy@1 {
 		reg = <1>;
 		qca,smarteee-tw-us-1g = <24>;
+		interrupts-extended = <&gpio2 4 IRQ_TYPE_EDGE_FALLING>;
 	};
 };
 
@@ -156,6 +157,7 @@
 	rtc@51 {
 		compatible = "nxp,pcf2129";
 		reg = <0x51>;
+		interrupts-extended = <&gpio2 8 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
index a7dcbecc1f41..af6258b2fe82 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a-clearfog-itx.dtsi
@@ -96,6 +96,14 @@
 	status = "okay";
 };
 
+&pcie3 {
+	status = "okay";
+};
+
+&pcie5 {
+	status = "okay";
+};
+
 &pcs_mdio7 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi b/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
index 6f27a9cc2494..86d018f470c1 100644
--- a/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-apalis-v1.1.dtsi
@@ -256,7 +256,7 @@
 };
 
 &asrc0 {
-	fsl,asrc-rate  = <48000>;
+	fsl,asrc-rate = <48000>;
 };
 
 &adc0 {
diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi
index 9b8b1380c4c2..469de8b536b5 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi
@@ -68,10 +68,10 @@ hsio_subsys: bus@5f000000 {
 		clock-names = "dbi", "mstr", "slv";
 		bus-range = <0x00 0xff>;
 		device_type = "pci";
-		interrupt-map = <0 0 0 1 &gic 0 105 4>,
-				<0 0 0 2 &gic 0 106 4>,
-				<0 0 0 3 &gic 0 107 4>,
-				<0 0 0 4 &gic 0 108 4>;
+		interrupt-map = <0 0 0 1 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-map-mask = <0 0 0 0x7>;
 		num-lanes = <1>;
 		num-viewport = <4>;
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
index b6d64d3906ea..25a77cac6f0b 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts
@@ -652,7 +652,7 @@
 	status = "okay";
 };
 
-&pcie0_ep{
+&pcie0_ep {
 	phys = <&hsio_phy 0 PHY_TYPE_PCIE 0>;
 	phy-names = "pcie-phy";
 	pinctrl-0 = <&pinctrl_pcieb>;
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
index 9b114bed084b..a66ba6d0a8c0 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
@@ -5,6 +5,8 @@
 
 /delete-node/ &enet1_lpcg;
 /delete-node/ &fec2;
+/delete-node/ &usbotg3;
+/delete-node/ &usb3_phy;
 
 / {
 	conn_enet0_root_clk: clock-conn-enet0-root {
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi
index bbc6abb0fdf2..ec466e4d7df5 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi
@@ -42,10 +42,10 @@
 		#interrupt-cells = <1>;
 		interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "msi";
-		interrupt-map = <0 0 0 1 &gic 0 47 4>,
-				<0 0 0 2 &gic 0 48 4>,
-				<0 0 0 3 &gic 0 49 4>,
-				<0 0 0 4 &gic 0 50 4>;
+		interrupt-map = <0 0 0 1 &gic GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &gic GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &gic GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &gic GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-map-mask = <0 0 0 0x7>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
index a71d8b32c192..8d60827822ed 100644
--- a/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8dxl.dtsi
@@ -92,6 +92,7 @@
 		compatible = "arm,gic-v3";
 		reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
 		      <0x0 0x51b00000 0 0xc0000>; /* GICR (RD_base + SGI_base) */
+		#address-cells = <0>;
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-emtop-baseboard.dts b/arch/arm64/boot/dts/freescale/imx8mm-emtop-baseboard.dts
index 90e638b8e92a..87fe3ebedb8d 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-emtop-baseboard.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-emtop-baseboard.dts
@@ -333,7 +333,7 @@
 		>;
 	};
 
-	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp{
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
 		fsl,pins = <
 			MX8MM_IOMUXC_SD1_CLK_USDHC1_CLK         	0x194
 			MX8MM_IOMUXC_SD1_CMD_USDHC1_CMD         	0x1d4
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
index 622caaa78eaf..ff7ca2075230 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
@@ -147,6 +147,7 @@
 		simple-audio-card,format = "i2s";
 		simple-audio-card,frame-master = <&cpudai>;
 		simple-audio-card,bitclock-master = <&cpudai>;
+		simple-audio-card,mclk-fs = <256>;
 		simple-audio-card,widgets =
 			"Line", "Left Line Out Jack",
 			"Line", "Right Line Out Jack";
@@ -158,11 +159,11 @@
 			sound-dai = <&sai3>;
 			dai-tdm-slot-num = <2>;
 			dai-tdm-slot-width = <32>;
+			system-clock-direction-out;
 		};
 
 		simple-audio-card,codec {
 			sound-dai = <&wm8524>;
-			clocks = <&clk IMX8MM_CLK_SAI3_ROOT>;
 		};
 	};
 
@@ -570,9 +571,17 @@
 &sai3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sai3>;
-	assigned-clocks = <&clk IMX8MM_CLK_SAI3>;
-	assigned-clock-parents = <&clk IMX8MM_AUDIO_PLL1_OUT>;
-	assigned-clock-rates = <24576000>;
+	assigned-clocks = <&clk IMX8MM_AUDIO_PLL1>,
+			  <&clk IMX8MM_AUDIO_PLL2>,
+			  <&clk IMX8MM_CLK_SAI3>;
+	assigned-clock-parents = <0>, <0>, <&clk IMX8MM_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <393216000>, <361267200>, <24576000>;
+	fsl,sai-mclk-direction-output;
+	clocks = <&clk IMX8MM_CLK_SAI3_IPG>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_CLK_SAI3_ROOT>, <&clk IMX8MM_CLK_DUMMY>,
+		<&clk IMX8MM_CLK_DUMMY>, <&clk IMX8MM_AUDIO_PLL1_OUT>,
+		<&clk IMX8MM_AUDIO_PLL2_OUT>;
+	clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-lte.dtso b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-lte.dtso
new file mode 100644
index 000000000000..324004b0eca3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-lte.dtso
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: GPL-2.0+ OR MIT
+/*
+ * Copyright (C) 2025 Kontron Electronics GmbH
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/leds/common.h>
+#include "imx8mm-pinfunc.h"
+
+&{/} {
+	compatible = "kontron,imx8mm-bl", "kontron,imx8mm-sl", "fsl,imx8mm";
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_keys>;
+
+		key-user {
+			label = "user";
+			linux,code = <BTN_0>;
+			gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_led_lte>;
+
+		lte-led1-b {
+			label = "lte-led1-blue";
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+		};
+
+		lte-led1-g {
+			label = "lte-led1-green";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+		};
+
+		lte-led1-r {
+			label = "lte-led1-red";
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio5 23 GPIO_ACTIVE_HIGH>;
+		};
+
+		lte-led2-b {
+			label = "lte-led2-blue";
+			color = <LED_COLOR_ID_BLUE>;
+			gpios = <&gpio5 25 GPIO_ACTIVE_HIGH>;
+		};
+
+		lte-led2-g {
+			label = "lte-led2-green";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio5 22 GPIO_ACTIVE_HIGH>;
+		};
+
+		lte-led2-r {
+			label = "lte-led2-red";
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio5 24 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&ecspi3 {
+	status = "disabled";
+};
+
+&i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	tpm@2e {
+		compatible = "infineon,slb9673", "tcg,tpm-tis-i2c";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tpm>;
+		reg = <0x2e>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio3>;
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "VDD_IO_REF", "TPM_PIRQ#",
+			  "TPM_RESET# ", "", "", "",
+			  "", "LTE_LED1_B", "LTE_LED1_G", "",
+			  "";
+
+	vdd-io-ref-hog {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_HIGH>;
+		line-name = "VDD_IO_REF";
+		output-high;
+	};
+
+	tpm-reset-hog {
+		gpio-hog;
+		gpios = <12 GPIO_ACTIVE_LOW>;
+		line-name = "TPM_RESET#";
+		output-low;
+	};
+};
+
+&gpio4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio4>;
+	gpio-line-names = "", "", "LTE_RESET", "",
+			  "", "", "", "",
+			  "", "", "", "LTE_PWRKEY",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "LTE_PWR_EN";
+};
+
+&gpio5 {
+	gpio-line-names = "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "", "",
+			  "", "", "LTE_LED2_G", "LTE_LED1_R",
+			  "LTE_LED2_R", "LTE_LED2_B";
+};
+
+&iomuxc {
+	pinctrl_gpio3: gpio3grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_DATA04_GPIO3_IO10		0x19 /* VDD_IO_REF */
+		>;
+	};
+
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_RXD0_GPIO4_IO2		0x19 /* LTE_RESET */
+			MX8MM_IOMUXC_SAI1_TXC_GPIO4_IO11 		0x19 /* LTE_PWRKEY */
+			MX8MM_IOMUXC_SAI1_MCLK_GPIO4_IO20		0x19 /* LTE_PWR_EN */
+		>;
+	};
+
+	pinctrl_gpio_keys: gpiokeysgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_SAI1_TXD0_GPIO4_IO12		0x19 /* Pushbutton */
+		>;
+	};
+
+	pinctrl_gpio_led_lte: gpioledltegrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_WE_B_GPIO3_IO17		0x19 /* LTE_LED1_B */
+			MX8MM_IOMUXC_NAND_WP_B_GPIO3_IO18		0x19 /* LTE_LED1_G */
+			MX8MM_IOMUXC_UART1_TXD_GPIO5_IO23		0x19 /* LTE_LED1_R */
+			MX8MM_IOMUXC_UART2_TXD_GPIO5_IO25		0x19 /* LTE_LED2_B */
+			MX8MM_IOMUXC_UART1_RXD_GPIO5_IO22		0x19 /* LTE_LED2_G */
+			MX8MM_IOMUXC_UART2_RXD_GPIO5_IO24		0x19 /* LTE_LED2_R */
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MM_IOMUXC_I2C2_SCL_I2C2_SCL			0x40000083 /* I2C_A_SCL */
+			MX8MM_IOMUXC_I2C2_SDA_I2C2_SDA			0x40000083 /* I2C_A_SDA */
+		>;
+	};
+
+	pinctrl_tpm: tpmgrp {
+		fsl,pins = <
+			MX8MM_IOMUXC_NAND_DATA05_GPIO3_IO11		0x19 /* TPM_PIRQ# */
+			MX8MM_IOMUXC_NAND_DATA06_GPIO3_IO12		0x39 /* TPM_RESET# */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
index 33f8d7d1970e..3a166cf0afcb 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl-osm-s.dts
@@ -48,14 +48,6 @@
 		pwms = <&pwm2 0 5000 0>;
 	};
 
-	reg_rst_eth2: regulator-rst-eth2 {
-		compatible = "regulator-fixed";
-		gpio = <&gpio1 1 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-		regulator-name = "rst-usb-eth2";
-	};
-
 	reg_vdd_5v: regulator-5v {
 		compatible = "regulator-fixed";
 		regulator-always-on;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
index d16490d87687..e756fe5db56b 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-bl.dts
@@ -268,8 +268,16 @@
 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
+	/*
+	 * During bootup the CTS needs to stay LOW, which is only possible if this
+	 * pin is controlled by a GPIO. The UART IP always sets CTS to HIGH if not
+	 * running. So using 'uart-has-rtscts' is not a good choice here! There are
+	 * workarounds for this, but they introduce unnecessary complexity and are
+	 * therefore avoided here. For more information about this see:
+	 * https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit?id=79d0224f6bf296d04cd843cfc49921b19c97bb09
+	 */
+	rts-gpios = <&gpio4 29 GPIO_ACTIVE_HIGH>;
 	linux,rs485-enabled-at-boot-time;
-	uart-has-rtscts;
 	status = "okay";
 };
 
@@ -439,7 +447,7 @@
 			MX8MM_IOMUXC_SAI3_TXFS_UART2_DCE_RX		0x0
 			MX8MM_IOMUXC_SAI3_TXC_UART2_DCE_TX		0x0
 			MX8MM_IOMUXC_SAI3_RXD_UART2_DCE_RTS_B		0x0
-			MX8MM_IOMUXC_SAI3_RXC_UART2_DCE_CTS_B		0x0
+			MX8MM_IOMUXC_SAI3_RXC_GPIO4_IO29		0x19
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso b/arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso
index 1db27731b581..57d0739fcce3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-dl.dtso
@@ -107,7 +107,7 @@
 	#size-cells = <0>;
 	status = "okay";
 
-	touchscreen@5d {
+	gt911: touchscreen@5d {
 		compatible = "goodix,gt928";
 		reg = <0x5d>;
 		pinctrl-names = "default";
@@ -117,6 +117,17 @@
 		reset-gpios = <&gpio3 23 0>;
 		irq-gpios = <&gpio3 22 0>;
 	};
+
+	st1633: touchscreen@55 {
+		compatible = "sitronix,st1633";
+		reg = <0x55>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_touch>;
+		interrupts = <22 8>;
+		interrupt-parent = <&gpio3>;
+		gpios = <&gpio3 22 0>;
+		status = "disabled";
+	};
 };
 
 &lvds {
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
index d45542965230..96987910609f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-kontron-osm-s.dtsi
@@ -30,29 +30,6 @@
 		stdout-path = &uart3;
 	};
 
-	reg_vdd_carrier: regulator-vdd-carrier {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_reg_vdd_carrier>;
-		gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-name = "VDD_CARRIER";
-
-		regulator-state-standby {
-			regulator-on-in-suspend;
-		};
-
-		regulator-state-mem {
-			regulator-off-in-suspend;
-		};
-
-		regulator-state-disk {
-			regulator-off-in-suspend;
-		};
-	};
-
 	reg_usb1_vbus: regulator-usb1-vbus {
 		compatible = "regulator-fixed";
 		pinctrl-names = "default";
@@ -61,7 +38,7 @@
 		gpio = <&gpio3 25 GPIO_ACTIVE_HIGH>;
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		regulator-name = "VBUS_USB1";
+		regulator-name = "VBUS_USB_A";
 	};
 
 	reg_usb2_vbus: regulator-usb2-vbus {
@@ -72,7 +49,7 @@
 		gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
-		regulator-name = "VBUS_USB2";
+		regulator-name = "VBUS_USB_B";
 	};
 
 	reg_usdhc2_vcc: regulator-usdhc2-vcc {
@@ -96,6 +73,29 @@
 		regulator-max-microvolt = <3300000>;
 		regulator-name = "VCC_SDIO_B";
 	};
+
+	reg_vdd_carrier: regulator-vdd-carrier {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_vdd_carrier>;
+		gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-name = "VDD_CARRIER";
+
+		regulator-state-standby {
+			regulator-on-in-suspend;
+		};
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+
+		regulator-state-disk {
+			regulator-off-in-suspend;
+		};
+	};
 };
 
 &A53_0 {
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10.dtso b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10.dtso
index e5ca5a664b61..79e4c3710ac3 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10.dtso
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phyboard-polis-peb-av-10.dtso
@@ -20,7 +20,7 @@
 		pwms = <&pwm4 0 50000 0>;
 		power-supply = <&reg_vdd_3v3_s>;
 		enable-gpios = <&gpio5 1 GPIO_ACTIVE_HIGH>;
-		brightness-levels= <0 4 8 16 32 64 128 255>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
 	};
 
 	panel {
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi
index 672baba4c8d0..921a7f58fd41 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-phycore-som.dtsi
@@ -340,10 +340,10 @@
 			MX8MM_IOMUXC_ENET_RX_CTL_ENET1_RGMII_RX_CTL	0x90
 			MX8MM_IOMUXC_ENET_TD0_ENET1_RGMII_TD0		0x16
 			MX8MM_IOMUXC_ENET_TD1_ENET1_RGMII_TD1		0x16
-			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x16
-			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x16
-			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x16
-			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x16
+			MX8MM_IOMUXC_ENET_TD2_ENET1_RGMII_TD2		0x12
+			MX8MM_IOMUXC_ENET_TD3_ENET1_RGMII_TD3		0x12
+			MX8MM_IOMUXC_ENET_TXC_ENET1_RGMII_TXC		0x12
+			MX8MM_IOMUXC_ENET_TX_CTL_ENET1_RGMII_TX_CTL	0x12
 			MX8MM_IOMUXC_GPIO1_IO07_GPIO1_IO7		0x10
 		>;
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx8mm.dtsi b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
index ded89b046970..fc3cd639310e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm.dtsi
@@ -1467,6 +1467,7 @@
 			compatible = "arm,gic-v3";
 			reg = <0x38800000 0x10000>, /* GIC Dist */
 			      <0x38880000 0xc0000>; /* GICR (RD_base + SGI_base) */
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
index 33d73f3dc187..145355ff91b4 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dtsi
@@ -387,6 +387,11 @@
 	assigned-clock-parents = <&clk IMX8MN_AUDIO_PLL1_OUT>;
 	assigned-clock-rates = <24576000>;
 	fsl,sai-mclk-direction-output;
+	clocks = <&clk IMX8MN_CLK_SAI3_IPG>, <&clk IMX8MN_CLK_DUMMY>,
+		<&clk IMX8MN_CLK_SAI3_ROOT>, <&clk IMX8MN_CLK_DUMMY>,
+		<&clk IMX8MN_CLK_DUMMY>, <&clk IMX8MN_AUDIO_PLL1_OUT>,
+		<&clk IMX8MN_AUDIO_PLL2_OUT>;
+	clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-proton2s.dts b/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-proton2s.dts
index 2a736dbe96b4..58e36de7a2cd 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-proton2s.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3-proton2s.dts
@@ -36,7 +36,7 @@
 	max-speed = <100>;
 };
 
-&ecspi1{
+&ecspi1 {
 	pinctrl-0 = <&pinctrl_ecspi1>;
 	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3a-som-v1.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3a-som-v1.dtsi
index 231e480acfd4..f654d866e58c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3a-som-v1.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-aristainetos3a-som-v1.dtsi
@@ -167,7 +167,7 @@
 			  <&clk IMX8MP_VIDEO_PLL1>;
 };
 
-&ecspi1{
+&ecspi1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs2>;
 	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW &gpio1 6 GPIO_ACTIVE_LOW>;
@@ -565,7 +565,7 @@
 	status = "disabled";
 };
 
-&pcie{
+&pcie {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_pcie>;
 	reset-gpio = <&gpio4 20 GPIO_ACTIVE_LOW>;
@@ -574,7 +574,7 @@
 	status = "okay";
 };
 
-&pcie_phy{
+&pcie_phy {
 	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
 	clocks = <&pcie0_refclk>;
 	clock-names = "ref";
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-cubox-m.dts b/arch/arm64/boot/dts/freescale/imx8mp-cubox-m.dts
new file mode 100644
index 000000000000..8290f187b79f
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-cubox-m.dts
@@ -0,0 +1,223 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/leds/common.h>
+
+#include "imx8mp-sr-som.dtsi"
+
+/ {
+	model = "SolidRun i.MX8MP CuBox-M";
+	compatible = "solidrun,imx8mp-cubox-m",
+		     "solidrun,imx8mp-sr-som", "fsl,imx8mp";
+
+	aliases {
+		ethernet0 = &eqos;
+		/delete-property/ ethernet1;
+		rtc0 = &carrier_rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&ir_pins>;
+		linux,autosuspend-period = <125>;
+		wakeup-source;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		status {
+			label = "status";
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_HEARTBEAT;
+		};
+	};
+
+	sound-hdmi {
+		compatible = "fsl,imx-audio-hdmi";
+		model = "audio-hdmi";
+		audio-cpu = <&aud2htx>;
+		hdmi-out;
+	};
+
+	vbus: regulator-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus";
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vbus_pins>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vmmc: regulator-mmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vmmc_pins>;
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <250>;
+	};
+};
+
+&aud2htx {
+	status = "okay";
+};
+
+&fec {
+	/* this board does not use second phy / ethernet on SoM */
+	status = "disabled";
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&i2c3 {
+	carrier_rtc: rtc@32 {
+		compatible = "epson,rx8130";
+		reg = <0x32>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_pins>;
+
+	hdmi_pins: pinctrl-hdmi-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x400001c3
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x400001c3
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x154
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x154
+		>;
+	};
+
+	ir_pins: pinctrl-ir-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10		0x4f
+		>;
+	};
+
+	led_pins: pinctrl-led-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x0
+		>;
+	};
+
+	usdhc2_pins: pinctrl-usdhc2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x140
+			MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B		0x140
+		>;
+	};
+
+	usdhc2_100mhz_pins: pinctrl-usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x140
+			MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B		0x140
+		>;
+	};
+
+	usdhc2_200mhz_pins: pinctrl-usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x140
+			MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B		0x140
+		>;
+	};
+
+	vbus_pins: pinctrl-vbus-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07		0x100
+		>;
+	};
+
+	vmmc_pins: pinctrl-vmmc-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19		0x0
+		>;
+	};
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	fsl,phy-tx-preemp-amp-tune-microamp = <1200>;
+	vbus-supply = <&vbus>;
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	fsl,phy-tx-preemp-amp-tune-microamp = <1200>;
+	vbus-supply = <&vbus>;
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "host";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&usdhc2_pins>;
+	pinctrl-1 = <&usdhc2_100mhz_pins>;
+	pinctrl-2 = <&usdhc2_200mhz_pins>;
+	vmmc-supply = <&vmmc>;
+	bus-width = <4>;
+	cap-power-off-card;
+	full-pwr-cycle;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
index d0fc5977258f..16078ff60ef0 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-data-modul-edm-sbc.dts
@@ -555,6 +555,7 @@
 	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
 	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&ldo5>;
 	bus-width = <4>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
index 7f754e0a5d69..68c2e0156a5c 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-dhcom-som.dtsi
@@ -609,6 +609,7 @@
 	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
 	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
 	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&ldo5>;
 	bus-width = <4>;
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-edm-g-wb.dts b/arch/arm64/boot/dts/freescale/imx8mp-edm-g-wb.dts
new file mode 100644
index 000000000000..138f21e257aa
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-edm-g-wb.dts
@@ -0,0 +1,359 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 TechNexion Ltd.
+ *
+ * Author: Ray Chang <ray.chang@technexion.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+#include "imx8mp-edm-g.dtsi"
+
+/ {
+	compatible = "technexion,edm-g-imx8mp-wb", "technexion,edm-g-imx8mp", "fsl,imx8mp";
+	model = "TechNexion EDM-G-IMX8MP SOM on WB-EDM-G";
+
+	connector {
+		compatible = "usb-c-connector";
+		data-role = "dual";
+		label = "USB-C";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				hs_ep: endpoint {
+					remote-endpoint = <&usb3_hs_ep>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				ss_ep: endpoint {
+					remote-endpoint = <&hd3ss3220_in_ep>;
+				};
+			};
+		};
+	};
+
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "HDMI OUT";
+		type = "a";
+
+		port {
+			hdmi_in: endpoint {
+				remote-endpoint = <&hdmi_tx_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			default-state = "on";
+			gpios = <&expander2 1 GPIO_ACTIVE_HIGH>;
+			label = "gpio-led";
+		};
+	};
+
+	pcie0_refclk: clock-pcie-ref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <100000000>;
+	};
+
+	reg_pwr_3v3: regulator-pwr-3v3 {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "pwr-3v3";
+	};
+
+	reg_pwr_5v: regulator-pwr-5v {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-max-microvolt = <5000000>;
+		regulator-min-microvolt = <5000000>;
+		regulator-name = "pwr-5v";
+	};
+
+	sound-hdmi {
+		compatible = "fsl,imx-audio-hdmi";
+		audio-cpu = <&aud2htx>;
+		hdmi-out;
+		model = "audio-hdmi";
+	};
+
+	sound-wm8960 {
+		compatible = "fsl,imx-audio-wm8960";
+		audio-asrc = <&easrc>;
+		audio-codec = <&wm8960>;
+		audio-cpu = <&sai3>;
+		audio-routing = "Headphone Jack", "HP_L",
+			"Headphone Jack", "HP_R",
+			"Ext Spk", "SPK_LP",
+			"Ext Spk", "SPK_LN",
+			"Ext Spk", "SPK_RP",
+			"Ext Spk", "SPK_RN",
+			"LINPUT1", "Mic Jack",
+			"LINPUT1", "Mic Jack",
+			"Mic Jack", "MICB";
+		model = "wm8960-audio";
+	};
+};
+
+&aud2htx {
+	status = "okay";
+};
+
+&easrc {
+	fsl,asrc-rate  = <48000>;
+	status = "okay";
+};
+
+&flexcan1 {
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"", "", "", "", "", "", "DSI_RST", "",
+		"", "", "", "", "", "PCIE_CLKREQ_N", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+	pinctrl-0 = <&pinctrl_gpio1>;
+};
+
+&gpio4 {
+	gpio-line-names =
+		"", "", "", "", "", "", "GPIO_P249", "GPIO_P251",
+		"", "GPIO_P255", "", "", "", "", "", "",
+		"DSI_BL_EN", "DSI_VDDEN", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "";
+	pinctrl-0 = <&pinctrl_gpio4>;
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	pinctrl-0 = <&pinctrl_hdmi>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ports {
+		port@1 {
+			hdmi_tx_out: endpoint {
+				remote-endpoint = <&hdmi_in>;
+			};
+		};
+	};
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+
+	wm8960: audio-codec@1a {
+		compatible = "wlf,wm8960";
+		reg = <0x1a>;
+		clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
+		clock-names = "mclk";
+		#sound-dai-cells = <0>;
+		AVDD-supply = <&reg_pwr_3v3>;
+		DBVDD-supply = <&reg_pwr_3v3>;
+		DCVDD-supply = <&reg_pwr_3v3>;
+		SPKVDD1-supply = <&reg_pwr_5v>;
+		SPKVDD2-supply = <&reg_pwr_5v>;
+		wlf,gpio-cfg = <1 2>;
+		wlf,hp-cfg = <2 2 3>;
+		wlf,shared-lrclk;
+	};
+
+	expander1: gpio@21 {
+		compatible = "nxp,pca9555";
+		reg = <0x21>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names = "EXPOSURE_TRIG_IN1", "FLASH_OUT1",
+				  "INFO_TRIG_IN1", "CAM_SHUTTER1", "XVS1",
+				  "PWR1_TIME0", "PWR1_TIME1", "PWR1_TIME2",
+				  "EXPOSURE_TRIG_IN2", "FLASH_OUT2",
+				  "INFO_TRIG_IN2", "CAM_SHUTTER2", "XVS2",
+				  "PWR2_TIME0", "PWR2_TIME1", "PWR2_TIME2";
+	};
+
+	expander2: gpio@23 {
+		compatible = "nxp,pca9555";
+		reg = <0x23>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupt-parent = <&gpio4>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		gpio-line-names = "M2_DISABLE_N", "LED_EN", "", "",
+				  "", "", "", "USB_OTG_OC",
+				  "EXT_GPIO8", "EXT_GPIO9", "", "",
+				  "", "CSI1_PDB", "CSI2_PDB", "PD_FAULT";
+		pinctrl-0 = <&pinctrl_expander2_irq>;
+		pinctrl-names = "default";
+	};
+
+	usb_typec: usb-typec@67 {
+		compatible = "ti,hd3ss3220";
+		reg = <0x67>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&pinctrl_hd3ss3220_irq>;
+		pinctrl-names = "default";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				hd3ss3220_in_ep: endpoint {
+					remote-endpoint = <&ss_ep>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				hd3ss3220_out_ep: endpoint {
+					remote-endpoint = <&usb3_role_switch>;
+				};
+			};
+		};
+	};
+};
+
+&i2c_0 {
+	eeprom2: eeprom@51 {
+		compatible = "atmel,24c02";
+		reg = <0x51>;
+		pagesize = <16>;
+	};
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pcie_phy {
+	clocks = <&pcie0_refclk>;
+	clock-names = "ref";
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_INPUT>;
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	/* dual role is implemented but not a full featured OTG */
+	adp-disable;
+	dr_mode = "otg";
+	hnp-disable;
+	role-switch-default-mode = "peripheral";
+	srp-disable;
+	usb-role-switch;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			usb3_hs_ep: endpoint {
+				remote-endpoint = <&hs_ep>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			usb3_role_switch: endpoint {
+				remote-endpoint = <&hd3ss3220_out_ep>;
+			};
+		};
+	};
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+};
+
+&iomuxc {
+	pinctrl_expander2_irq: expander2-irqgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXC__GPIO4_IO11		0x140 /* GPIO_P247 */
+		>;
+	};
+
+	pinctrl_gpio1: gpio1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x16 /* DSI_RST */
+		>;
+	};
+
+	pinctrl_gpio4: gpio4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD4__GPIO4_IO06		0x16 /* GPIO_P249 */
+			MX8MP_IOMUXC_SAI1_RXD5__GPIO4_IO07		0x16 /* GPIO_P251 */
+			MX8MP_IOMUXC_SAI1_RXD7__GPIO4_IO09		0x16 /* GPIO_P255 */
+			MX8MP_IOMUXC_SAI1_TXD4__GPIO4_IO16		0x16 /* DSI_BL_EN */
+			MX8MP_IOMUXC_SAI1_TXD5__GPIO4_IO17		0x16 /* DSI_VDDEN */
+		>;
+	};
+
+	pinctrl_hd3ss3220_irq: hd3ss3220-irqgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD6__GPIO4_IO08		0x41 /* GPIO_P253 */
+		>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x1c2
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x1c2
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x10
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-edm-g.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-edm-g.dtsi
new file mode 100644
index 000000000000..3f1e0837f349
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-edm-g.dtsi
@@ -0,0 +1,786 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright 2024 TechNexion Ltd.
+ *
+ * Author: Ray Chang <ray.chang@technexion.com>
+ */
+
+#include "imx8mp.dtsi"
+
+/ {
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	i2c_0: i2c {
+		compatible = "i2c-gpio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <100000>;
+		pinctrl-0 = <&pinctrl_i2c_brd_conf>;
+		pinctrl-names = "default";
+		scl-gpios = <&gpio4 28 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		sda-gpios = <&gpio4 29 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+		eeprom: eeprom@53 {
+			compatible = "atmel,24c02";
+			reg = <0x53>;
+			pagesize = <16>;
+		};
+	};
+
+	memory@40000000 {
+		reg = <0x0 0x40000000 0 0xc0000000>,
+		      <0x1 0x00000000 0 0xc0000000>;
+		device_type = "memory";
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		off-on-delay-us = <12000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VSD_3V3";
+		startup-delay-us = <100>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	rfkill {
+		compatible = "rfkill-gpio";
+		name = "rfkill";
+		pinctrl-0 = <&pinctrl_bt_ctrl>;
+		pinctrl-names = "default";
+		radio-type = "bluetooth";
+		shutdown-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	wl_reg_on: regulator-wl-reg-on {
+		compatible = "regulator-fixed";
+		off-on-delay-us = <20000>;
+		pinctrl-0 = <&pinctrl_wifi_ctrl>;
+		pinctrl-names = "default";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "WL_REG_ON";
+		startup-delay-us = <100>;
+		gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_1 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_2 {
+	cpu-supply = <&reg_arm>;
+};
+
+&A53_3 {
+	cpu-supply = <&reg_arm>;
+};
+
+&ecspi1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	num-cs = <1>;
+	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
+	pinctrl-names = "default";
+};
+
+&eqos {
+	phy-handle = <&ethphy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_eqos>;
+	pinctrl-names = "default";
+	snps,force_thresh_dma_mode;
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+			eee-broken-1000t;
+			reset-assert-us = <35000>;
+			reset-deassert-us = <75000>;
+			reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+			realtek,clkout-disable;
+		};
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <5>;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0>;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <1>;
+			snps,priority = <0x2>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <2>;
+			snps,priority = <0x4>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <3>;
+			snps,priority = <0x8>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <4>;
+			snps,priority = <0xf0>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <5>;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	pinctrl-names = "default";
+};
+
+&flexcan2 {
+	pinctrl-0 = <&pinctrl_flexcan2>;
+	pinctrl-names = "default";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	pmic: pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pmic>;
+
+		regulators {
+			BUCK1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1000000>;
+				regulator-min-microvolt = <720000>;
+				regulator-name = "BUCK1";
+				regulator-ramp-delay = <3125>;
+			};
+
+			reg_arm: BUCK2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1025000>;
+				regulator-min-microvolt = <720000>;
+				regulator-name = "BUCK2";
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			BUCK4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3600000>;
+				regulator-min-microvolt = <3000000>;
+				regulator-name = "BUCK4";
+			};
+
+			reg_buck5: BUCK5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1950000>;
+				regulator-min-microvolt = <1650000>;
+				regulator-name = "BUCK5";
+			};
+
+			BUCK6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1155000>;
+				regulator-min-microvolt = <1045000>;
+				regulator-name = "BUCK6";
+			};
+
+			LDO1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1950000>;
+				regulator-min-microvolt = <1650000>;
+				regulator-name = "LDO1";
+			};
+
+			LDO3 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <1890000>;
+				regulator-min-microvolt = <1710000>;
+				regulator-name = "LDO3";
+			};
+
+			LDO5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "LDO5";
+			};
+		};
+	};
+};
+
+&i2c2 {
+	/* I2C_B on EDMG */
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-names = "default";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-names = "default";
+};
+
+&i2c4 {
+	/* I2C_A on EDMG */
+	clock-frequency = <100000>;
+	pinctrl-0 = <&pinctrl_i2c4>;
+	pinctrl-names = "default";
+};
+
+&i2c5 {
+	/* I2C_C on EDMG */
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_i2c5>;
+	pinctrl-names = "default";
+};
+
+&pcie {
+	pinctrl-0 = <&pinctrl_pcie>;
+	pinctrl-names = "default";
+	reset-gpio = <&gpio1 1 GPIO_ACTIVE_LOW>;
+};
+
+&pwm1 {
+	pinctrl-0 = <&pinctrl_pwm1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-0 = <&pinctrl_pwm2>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-0 = <&pinctrl_pwm3>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&pwm4 {
+	pinctrl-0 = <&pinctrl_pwm4>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&sai2 {
+	/* AUD_B on EDMG */
+	assigned-clocks = <&clk IMX8MP_CLK_SAI2>;
+	assigned-clock-rates = <12288000>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	pinctrl-0 = <&pinctrl_sai2>;
+	pinctrl-names = "default";
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&sai3 {
+	/* AUD_A on EDMG */
+	assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
+	assigned-clock-rates = <12288000>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	pinctrl-0 = <&pinctrl_sai3>;
+	pinctrl-names = "default";
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
+
+&uart1 {
+	/* BT */
+	assigned-clocks = <&clk IMX8MP_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	pinctrl-0 = <&pinctrl_uart1>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart2 {
+	/* UART_A on EDMG, console */
+	pinctrl-0 = <&pinctrl_uart2>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&uart3 {
+	/* UART_C on EDMG */
+	assigned-clocks = <&clk IMX8MP_CLK_UART3>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	pinctrl-0 = <&pinctrl_uart3>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&uart4 {
+	/* UART_B on EDMG */
+	assigned-clocks = <&clk IMX8MP_CLK_UART4>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	pinctrl-0 = <&pinctrl_uart4>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+};
+
+&usdhc1 {
+	/* WIFI SDIO */
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC1>;
+	assigned-clock-rates = <200000000>;
+	bus-width = <4>;
+	keep-power-in-suspend;
+	non-removable;
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	vmmc-supply = <&wl_reg_on>;
+	status = "okay";
+};
+
+&usdhc2 {
+	/* SD card on baseboard */
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <4>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&usdhc3 {
+	/* eMMC on SOM */
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	bus-width = <8>;
+	non-removable;
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-0 = <&pinctrl_wdog>;
+	pinctrl-names = "default";
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-0 = <&pinctrl_hog>;
+	pinctrl-names = "default";
+
+	pinctrl_bt_ctrl: bt-ctrlgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05	0x41 /* BT_REG_ON */
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19	0x41 /* BT_WAKE_HOST */
+		>;
+	};
+
+	pinctrl_ecspi1_cs: ecspi1csgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09	0x40000
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK	0x82
+			MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI	0x82
+			MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO	0x82
+		>;
+	};
+
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC			0x3
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO			0x23
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0		0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1		0x91
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2		0x91
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3		0x91
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x91
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0		0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1		0x1f
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2		0x1f
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3		0x1f
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x1f
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
+			MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09			0x19
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12			0x19
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX		0x154
+			MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX		0x154
+		>;
+	};
+
+	pinctrl_flexcan2: flexcan2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX		0x154
+			MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX		0x154
+		>;
+	};
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD	0x40000019
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL		0x400001a3
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA		0x400001a3
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL		0x400001a3
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA		0x400001a3
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL		0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA		0x400001c3
+		>;
+	};
+
+	pinctrl_i2c5: i2c5grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_TX__I2C5_SCL		0x400001a3
+			MX8MP_IOMUXC_SPDIF_RX__I2C5_SDA		0x400001a3
+		>;
+	};
+
+	pinctrl_i2c_brd_conf: i2cbrdconfgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28	0x1c3 /* BRD_CONF_SCL, bitbang */
+			MX8MP_IOMUXC_SAI3_RXC__GPIO4_IO29	0x1c3 /* BRD_CONF_SDA, bitbang */
+		>;
+	};
+
+	pinctrl_pcie: pciegrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13	0x41 /* PCIE CLKREQ */
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21	0x41 /* PCIE WAKE */
+			MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01	0x41 /* PCIE RST */
+		>;
+	};
+
+	pinctrl_pmic: pmicirqgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03	0x41
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT	0x116
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT	0x116
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXC__PWM3_OUT		0x116
+		>;
+	};
+
+	pinctrl_pwm4: pwm4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXFS__PWM4_OUT	0x116
+		>;
+	};
+
+	pinctrl_sai2: sai2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_MCLK__AUDIOMIX_SAI2_MCLK	0xd6
+			MX8MP_IOMUXC_SAI2_TXFS__AUDIOMIX_SAI2_TX_SYNC	0xd6
+			MX8MP_IOMUXC_SAI2_TXC__AUDIOMIX_SAI2_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI2_RXD0__AUDIOMIX_SAI2_RX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI2_TXD0__AUDIOMIX_SAI2_TX_DATA00	0xd6
+		>;
+	};
+
+	pinctrl_sai3: sai3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK	0xd6
+			MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0xd6
+			MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00	0xd6
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX	0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX	0x140
+			MX8MP_IOMUXC_UART3_RXD__UART1_DCE_CTS	0x140
+			MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS	0x140
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX	0x140
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX	0x140
+			MX8MP_IOMUXC_UART4_RXD__UART2_DCE_CTS	0x140
+			MX8MP_IOMUXC_UART4_TXD__UART2_DCE_RTS	0x140
+		>;
+	};
+
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_DATA7__UART3_DCE_RX	0x140
+			MX8MP_IOMUXC_SD1_DATA6__UART3_DCE_TX	0x140
+			MX8MP_IOMUXC_SD1_STROBE__UART3_DCE_CTS	0x140
+			MX8MP_IOMUXC_SD1_RESET_B__UART3_DCE_RTS	0x140
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__UART4_DCE_RX	0x140
+			MX8MP_IOMUXC_ECSPI2_MOSI__UART4_DCE_TX	0x140
+			MX8MP_IOMUXC_ECSPI2_MISO__UART4_DCE_CTS	0x140
+			MX8MP_IOMUXC_ECSPI2_SS0__UART4_DCE_RTS	0x140
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x190
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d0
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d0
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d0
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d0
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d0
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x194
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d4
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d4
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d4
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d4
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d4
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK	0x196
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD	0x1d6
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0	0x1d6
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1	0x1d6
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2	0x1d6
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3	0x1d6
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK	0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD	0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc1
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12	0x1c4
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x41
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x190
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK	0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD	0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0	0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1	0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2	0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3	0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4	0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5	0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6	0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7	0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE	0x196
+		>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B	0xc6
+		>;
+	};
+
+	pinctrl_wifi_ctrl: wifi-ctrlgrp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00	0x41 /* WL_REG_ON */
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18	0x41 /* WL_WAKE_HOST */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
index c0cc5611048e..3730792daf50 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-evk.dts
@@ -309,7 +309,7 @@
 };
 
 &easrc {
-	fsl,asrc-rate  = <48000>;
+	fsl,asrc-rate = <48000>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-mate.dts b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-mate.dts
new file mode 100644
index 000000000000..00614f5d58ea
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-mate.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/dts-v1/;
+
+#include "imx8mp-sr-som.dtsi"
+#include "imx8mp-hummingboard-pulse-common.dtsi"
+#include "imx8mp-hummingboard-pulse-hdmi.dtsi"
+
+/ {
+	model = "SolidRun i.MX8MP HummingBoard Mate";
+	compatible = "solidrun,imx8mp-hummingboard-mate",
+		     "solidrun,imx8mp-sr-som", "fsl,imx8mp";
+
+	aliases {
+		ethernet0 = &eqos;
+		/delete-property/ ethernet1;
+	};
+};
+
+&fec {
+	/* this board does not use second phy / ethernet on SoM */
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mikro_pwm_pins>, <&mikro_int_pins>, <&mikro_rst_pins>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pro.dts b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pro.dts
new file mode 100644
index 000000000000..36cd452f1583
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pro.dts
@@ -0,0 +1,76 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+#include "imx8mp-sr-som.dtsi"
+#include "imx8mp-hummingboard-pulse-codec.dtsi"
+#include "imx8mp-hummingboard-pulse-common.dtsi"
+#include "imx8mp-hummingboard-pulse-hdmi.dtsi"
+#include "imx8mp-hummingboard-pulse-m2con.dtsi"
+#include "imx8mp-hummingboard-pulse-mini-hdmi.dtsi"
+
+/ {
+	model = "SolidRun i.MX8MP HummingBoard Pro";
+	compatible = "solidrun,imx8mp-hummingboard-pro",
+		     "solidrun,imx8mp-sr-som", "fsl,imx8mp";
+
+	aliases {
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mikro_pwm_pins>, <&mikro_int_pins>, <&hdmi_pins>,
+		    <&m2_wwan_wake_pins>;
+};
+
+&pcie {
+	pinctrl-0 = <&m2_reset_pins>;
+	pinctrl-names = "default";
+	reset-gpio = <&gpio1 6 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&pcie_phy {
+	clocks = <&hsio_blk_ctrl>;
+	clock-names = "ref";
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+	status = "okay";
+};
+
+&phy0 {
+	leds {
+		/* ADIN1300 LED_0 pin */
+		led@0 {
+			reg = <0>;
+			color = <LED_COLOR_ID_ORANGE>;
+			function = LED_FUNCTION_LAN;
+			default-state = "keep";
+		};
+
+		/delete-node/ led@1;
+	};
+};
+
+&phy1 {
+	leds {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* ADIN1300 LED_0 pin */
+		led@0 {
+			reg = <0>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			default-state = "keep";
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-codec.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-codec.dtsi
new file mode 100644
index 000000000000..77402a3db9ef
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-codec.dtsi
@@ -0,0 +1,59 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/ {
+	sound-wm8904 {
+		compatible = "fsl,imx-audio-wm8904";
+		model = "audio-wm8904";
+		audio-cpu = <&sai3>;
+		audio-codec = <&codec>;
+		audio-routing =
+			"Headphone Jack", "HPOUTL",
+			"Headphone Jack", "HPOUTR",
+			"AMIC", "MICBIAS",
+			"IN2R", "AMIC";
+	};
+};
+
+&i2c2 {
+	codec: audio-codec@1a {
+		compatible = "wlf,wm8904";
+		reg = <0x1a>;
+		#sound-dai-cells = <0>;
+		clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>;
+		clock-names = "mclk";
+		AVDD-supply = <&v_1_8>;
+		CPVDD-supply = <&v_1_8>;
+		DBVDD-supply = <&v_3_3>;
+		DCVDD-supply = <&v_1_8>;
+		MICVDD-supply = <&v_3_3>;
+	};
+};
+
+&iomuxc {
+	sai3_pins: pinctrl-sai3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_MCLK__AUDIOMIX_SAI3_MCLK	0xd6
+			MX8MP_IOMUXC_SAI3_TXFS__AUDIOMIX_SAI3_TX_SYNC	0xd6
+			MX8MP_IOMUXC_SAI3_TXC__AUDIOMIX_SAI3_TX_BCLK	0xd6
+			MX8MP_IOMUXC_SAI3_TXD__AUDIOMIX_SAI3_TX_DATA00	0xd6
+			MX8MP_IOMUXC_SAI3_RXD__AUDIOMIX_SAI3_RX_DATA00	0xd6
+		>;
+	};
+};
+
+&sai3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&sai3_pins>;
+	assigned-clocks = <&clk IMX8MP_CLK_SAI3>;
+	assigned-clock-parents = <&clk IMX8MP_AUDIO_PLL1_OUT>;
+	assigned-clock-rates = <12288000>;
+	clocks = <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_IPG>, <&clk IMX8MP_CLK_DUMMY>,
+		 <&audio_blk_ctrl IMX8MP_CLK_AUDIOMIX_SAI3_MCLK1>, <&clk IMX8MP_CLK_DUMMY>,
+		 <&clk IMX8MP_CLK_DUMMY>;
+	clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+	fsl,sai-mclk-direction-output;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-common.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-common.dtsi
new file mode 100644
index 000000000000..825ad6a2ba14
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-common.dtsi
@@ -0,0 +1,384 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		rtc0 = &carrier_rtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		led-0 {
+			label = "D30";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio5 28 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led-1 {
+			label = "D31";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio4 24 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led-2 {
+			label = "D32";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio4 23 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led-3 {
+			label = "D33";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio4 21 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+
+		led-4 {
+			label = "D34";
+			color = <LED_COLOR_ID_GREEN>;
+			gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+			default-state = "on";
+		};
+	};
+
+	rfkill-mpcie-wifi {
+		/*
+		 * The mpcie connector only has USB,
+		 * therefore this rfkill is for cellular radios only.
+		 */
+		compatible = "rfkill-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&mpcie_rfkill_pins>;
+		label = "mpcie radio";
+		radio-type = "wwan";
+		/* rfkill-gpio inverts internally */
+		shutdown-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+	};
+
+	vmmc: regulator-mmc {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vmmc_pins>;
+		regulator-name = "vmmc";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <250>;
+	};
+
+	vbus1: regulator-vbus-1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus1";
+		gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vbus1_pins>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vbus2: regulator-vbus-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vbus2";
+		gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vbus2_pins>;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	v_1_2: regulator-1-2 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+	};
+
+	vmpcie {
+		/* supplies mpcie and m2 connectors */
+		compatible = "regulator-fixed";
+		regulator-name = "vmpcie";
+		gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vmpcie_pins>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+/* mikrobus spi */
+&ecspi2 {
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mikro_spi_pins>;
+	status = "okay";
+};
+
+&gpio1 {
+	pinctrl-0 = <&mpcie_reset_pins>;
+	pinctrl-names = "default";
+
+	mpcie-reset-hog {
+		gpio-hog;
+		gpios = <1 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "mpcie-reset";
+	};
+};
+
+&i2c3 {
+	carrier_eeprom: eeprom@57{
+		compatible = "st,24c02", "atmel,24c02";
+		reg = <0x57>;
+		pagesize = <16>;
+	};
+
+	carrier_rtc: rtc@69 {
+		compatible = "abracon,ab1805";
+		reg = <0x69>;
+		abracon,tc-diode = "schottky";
+		abracon,tc-resistor = <3>;
+	};
+};
+
+&iomuxc {
+	csi_pins: pinctrl-csi-grp {
+		fsl,pins = <
+			/* Pin 24: STROBE */
+			MX8MP_IOMUXC_NAND_DATA01__GPIO3_IO07		0x0
+		>;
+	};
+
+	led_pins: pinctrl-led-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22		0x0
+			MX8MP_IOMUXC_SAI2_RXFS__GPIO4_IO21		0x0
+			MX8MP_IOMUXC_SAI2_RXD0__GPIO4_IO23		0x0
+			MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24		0x0
+			MX8MP_IOMUXC_UART4_RXD__GPIO5_IO28		0x0
+		>;
+	};
+
+	mikro_int_pins: pinctrl-mikro-int-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09		0x0
+		>;
+	};
+
+	mikro_pwm_pins: pinctrl-mikro-pwm-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_MISO__GPIO5_IO08		0x0
+		>;
+	};
+
+	mikro_rst_pins: pinctrl-mikro-rst-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXD__GPIO4_IO30		0x0
+		>;
+	};
+
+	mikro_spi_pins: pinctrl-mikro-spi-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SS0__ECSPI2_SS0		0x40000
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK		0x82
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO		0x82
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI		0x82
+		>;
+	};
+
+	mikro_uart_pins: pinctrl-mikro-uart-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__UART3_DCE_RX		0x140
+			MX8MP_IOMUXC_ECSPI1_MOSI__UART3_DCE_TX		0x140
+		>;
+	};
+
+	mpcie_reset_pins: pinctrl-mpcie-reset-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01		0x0
+		>;
+	};
+
+	mpcie_rfkill_pins: pinctrl-pcie-rfkill-grp {
+		fsl,pins = <
+			/* weak i/o, open drain */
+			MX8MP_IOMUXC_GPIO1_IO05__GPIO1_IO05		0x20
+		>;
+	};
+
+	usb_hub_pins: pinctrl-usb-hub-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO11__GPIO1_IO11		0x0
+		>;
+	};
+
+	usdhc2_pins: pinctrl-usdhc2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x140
+			MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B		0x140
+		>;
+	};
+
+	usdhc2_100mhz_pins: pinctrl-usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x140
+			MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B		0x140
+		>;
+	};
+
+	usdhc2_200mhz_pins: pinctrl-usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0x140
+			MX8MP_IOMUXC_SD2_CD_B__USDHC2_CD_B		0x140
+		>;
+	};
+
+	vbus1_pins: pinctrl-vbus-1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14		0x20
+		>;
+	};
+
+	vbus2_pins: pinctrl-vbus-2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15		0x20
+		>;
+	};
+
+	vmmc_pins: pinctrl-vmmc-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19		0x41
+		>;
+	};
+
+	vmpcie_pins: pinctrl-vmpcie-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10		0x0
+		>;
+	};
+};
+
+&phy0 {
+	leds {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* ADIN1300 LED_0 pin */
+		led@0 {
+			reg = <0>;
+			color = <LED_COLOR_ID_ORANGE>;
+			function = LED_FUNCTION_LAN;
+			default-state = "keep";
+		};
+
+		/* ADIN1300 LINK_ST pin */
+		led@1 {
+			reg = <1>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_LAN;
+			default-state = "keep";
+		};
+	};
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+/* mikrobus uart */
+&uart3 {
+	status = "okay";
+};
+
+&usb3_phy0 {
+	fsl,phy-tx-preemp-amp-tune-microamp = <1200>;
+	vbus-supply = <&vbus2>;
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb3_phy1 {
+	vbus-supply = <&vbus1>;
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "host";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb_hub_pins>;
+
+	hub_2_0: hub@1 {
+		compatible = "usb4b4,6502", "usb4b4,6506";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&v_1_2>;
+		vdd2-supply = <&v_3_3>;
+	};
+
+	hub_3_0: hub@2 {
+		compatible = "usb4b4,6500", "usb4b4,6504";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&v_1_2>;
+		vdd2-supply = <&v_3_3>;
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&usdhc2_pins>;
+	pinctrl-1 = <&usdhc2_100mhz_pins>;
+	pinctrl-2 = <&usdhc2_200mhz_pins>;
+	vmmc-supply = <&vmmc>;
+	bus-width = <4>;
+	cap-power-off-card;
+	full-pwr-cycle;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-hdmi.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-hdmi.dtsi
new file mode 100644
index 000000000000..d7a999c0d7e0
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-hdmi.dtsi
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/ {
+	sound-hdmi {
+		compatible = "fsl,imx-audio-hdmi";
+		model = "audio-hdmi";
+		audio-cpu = <&aud2htx>;
+		hdmi-out;
+	};
+};
+
+&aud2htx {
+	status = "okay";
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	status = "okay";
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&iomuxc {
+	hdmi_pins: pinctrl-hdmi-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL	0x400001c3
+			MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA	0x400001c3
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x154
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x154
+		>;
+	};
+};
+
+&lcdif3 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-m2con.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-m2con.dtsi
new file mode 100644
index 000000000000..8d8d8d2e3da8
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-m2con.dtsi
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/ {
+	rfkill-m2-gnss {
+		compatible = "rfkill-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&m2_gnss_rfkill_pins>;
+		label = "m.2 GNSS";
+		radio-type = "gps";
+		/* rfkill-gpio inverts internally */
+		shutdown-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	/* M.2 is B-keyed, so w-disable is for WWAN */
+	rfkill-m2-wwan {
+		compatible = "rfkill-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&m2_wwan_rfkill_pins>;
+		label = "m.2 WWAN";
+		radio-type = "wwan";
+		/* rfkill-gpio inverts internally */
+		shutdown-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&iomuxc {
+	m2_gnss_rfkill_pins: pinctrl-m2-gnss-rfkill-grp {
+		fsl,pins = <
+			/* weak i/o, open drain */
+			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07		0x20
+		>;
+	};
+
+	m2_reset_pins: pinctrl-m2-reset-grp {
+		fsl,pins = <
+			/*
+			 * 3.3V domain on SoC, set open-drain to ensure
+			 * 1.8V logic on connector
+			 */
+			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x20
+		>;
+	};
+
+	m2_wwan_rfkill_pins: pinctrl-m2-wwan-rfkill-grp {
+		fsl,pins = <
+			/* weak i/o, open drain */
+			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13		0x20
+		>;
+	};
+
+	m2_wwan_wake_pins: pinctrl-m2-wwan-wake-grp {
+		fsl,pins = <
+			/* weak i/o, open drain */
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x20
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-mini-hdmi.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-mini-hdmi.dtsi
new file mode 100644
index 000000000000..46916ddc0533
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse-mini-hdmi.dtsi
@@ -0,0 +1,81 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/ {
+	hdmi-connector {
+		compatible = "hdmi-connector";
+		label = "hdmi";
+		type = "c";
+
+		port {
+			hdmi_connector_in: endpoint {
+				remote-endpoint = <&adv7535_out>;
+			};
+		};
+	};
+};
+
+&i2c3 {
+	hdmi@3d {
+		compatible = "adi,adv7535";
+		reg = <0x3d>, <0x3f>, <0x3c>, <0x38>;
+		reg-names = "main", "edid", "cec", "packet";
+		adi,dsi-lanes = <4>;
+		avdd-supply = <&v_1_8>;
+		dvdd-supply = <&v_1_8>;
+		pvdd-supply = <&v_1_8>;
+		a2vdd-supply = <&v_1_8>;
+		v3p3-supply = <&v_3_3>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&mini_hdmi_pins>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <27 IRQ_TYPE_EDGE_FALLING>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				adv7535_from_dsim: endpoint {
+					remote-endpoint = <&dsim_to_adv7535>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				adv7535_out: endpoint {
+					remote-endpoint = <&hdmi_connector_in>;
+				};
+			};
+		};
+	};
+};
+
+&iomuxc {
+	mini_hdmi_pins: pinctrl-mini-hdmi-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27		0x0
+		>;
+	};
+};
+
+&lcdif1 {
+	status = "okay";
+};
+
+&mipi_dsi {
+	samsung,esc-clock-frequency = <10000000>;
+	status = "okay";
+
+	port@1 {
+		dsim_to_adv7535: endpoint {
+			remote-endpoint = <&adv7535_from_dsim>;
+			attach-bridge;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse.dts b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse.dts
new file mode 100644
index 000000000000..d32844c3af05
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-pulse.dts
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/phy/phy-imx8-pcie.h>
+
+#include "imx8mp-sr-som.dtsi"
+#include "imx8mp-hummingboard-pulse-codec.dtsi"
+#include "imx8mp-hummingboard-pulse-common.dtsi"
+#include "imx8mp-hummingboard-pulse-hdmi.dtsi"
+#include "imx8mp-hummingboard-pulse-m2con.dtsi"
+#include "imx8mp-hummingboard-pulse-mini-hdmi.dtsi"
+
+/ {
+	model = "SolidRun i.MX8MP HummingBoard Pulse";
+	compatible = "solidrun,imx8mp-hummingboard-pulse",
+		     "solidrun,imx8mp-sr-som", "fsl,imx8mp";
+
+	aliases {
+		ethernet0 = &eqos;
+		ethernet1 = &pcie_eth;
+	};
+};
+
+&fec {
+	/* this board does not use second phy / ethernet on SoM */
+	status = "disabled";
+};
+
+&gpio1 {
+	pinctrl-0 = <&mpcie_reset_pins>, <&m2_reset_pins>;
+	pinctrl-names = "default";
+
+	m2-reset-hog {
+		gpio-hog;
+		gpios = <6 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "m2-reset";
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mikro_pwm_pins>, <&mikro_int_pins>, <&hdmi_pins>,
+		    <&m2_wwan_wake_pins>;
+
+	pcie_eth_pins: pinctrl-pcie-eth-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI3_RXFS__GPIO4_IO28		0x0
+		>;
+	};
+};
+
+&pcie {
+	pinctrl-0 = <&pcie_eth_pins>;
+	pinctrl-names = "default";
+	reset-gpio = <&gpio4 28 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	root@0,0 {
+		compatible = "pci16c3,abcd";
+		reg = <0x00000000 0 0 0 0>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		/* Intel i210 */
+		pcie_eth: ethernet@1,0 {
+			compatible = "pci8086,157b";
+			reg = <0x00010000 0 0 0 0>;
+		};
+	};
+};
+
+&pcie_phy {
+	clocks = <&hsio_blk_ctrl>;
+	clock-names = "ref";
+	fsl,clkreq-unsupported;
+	fsl,refclk-pad-mode = <IMX8_PCIE_REFCLK_PAD_OUTPUT>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-ripple.dts b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-ripple.dts
new file mode 100644
index 000000000000..4ce5b799b6ab
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-hummingboard-ripple.dts
@@ -0,0 +1,31 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+/dts-v1/;
+
+#include "imx8mp-sr-som.dtsi"
+#include "imx8mp-hummingboard-pulse-common.dtsi"
+#include "imx8mp-hummingboard-pulse-mini-hdmi.dtsi"
+
+/ {
+	model = "SolidRun i.MX8MP HummingBoard Ripple";
+	compatible = "solidrun,imx8mp-hummingboard-ripple",
+		     "solidrun,imx8mp-sr-som", "fsl,imx8mp";
+
+	aliases {
+		ethernet0 = &eqos;
+		/delete-property/ ethernet1;
+	};
+};
+
+&fec {
+	/* this board does not use second phy / ethernet on SoM */
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&mikro_pwm_pins>, <&mikro_int_pins>, <&mikro_rst_pins>;
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts b/arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts
index 0eb9e726a9b8..614b4ce330b1 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-kontron-bl-osm-s.dts
@@ -123,40 +123,54 @@
 
 /*
  * Rename SoM signals according to board usage:
- *   SPI_A_WP      -> CAN_ADDR0
- *   SPI_A_HOLD    -> CAN_ADDR1
- *   GPIO_B_0      -> DIO1_OUT
- *   GPIO_B_1      -> DIO2_OUT
+ *   GPIO_B_0      -> IO_EXP_INT
+ *   GPIO_B_1      -> IO_EXP_RST
  */
 &gpio3 {
 	gpio-line-names = "PCIE_WAKE", "PCIE_CLKREQ", "PCIE_A_PERST", "SDIO_B_D5",
-			  "SDIO_B_D6", "SDIO_B_D7", "CAN_ADDR0", "CAN_ADDR1",
+			  "SDIO_B_D6", "SDIO_B_D7", "SPI_A_WP", "SPI_A_HOLD",
 			  "UART_B_RTS", "UART_B_CTS", "SDIO_B_D0", "SDIO_B_D1",
 			  "SDIO_B_D2", "SDIO_B_D3", "SDIO_B_WP", "SDIO_B_D4",
-			  "PCIE_SM_ALERT", "SDIO_B_CLK", "SDIO_B_CMD", "DIO1_OUT",
-			  "DIO2_OUT", "", "BOOT_SEL0", "BOOT_SEL1",
+			  "PCIE_SM_ALERT", "SDIO_B_CLK", "SDIO_B_CMD", "IO_EXP_INT",
+			  "IO_EXP_RST", "", "BOOT_SEL0", "BOOT_SEL1",
 			  "", "", "SDIO_B_CD", "SDIO_B_PWR_EN",
 			  "HDMI_CEC", "HDMI_HPD";
 };
 
 /*
- * Rename SoM signals according to board usage:
- *   GPIO_B_5      -> DIO2_IN
- *   GPIO_B_6      -> DIO3_IN
- *   GPIO_B_7      -> DIO4_IN
- *   GPIO_B_3      -> DIO4_OUT
- *   GPIO_B_4      -> DIO1_IN
- *   GPIO_B_2      -> DIO3_OUT
+ * Rename SoM signals according to board usage and remove labels for unsed pins:
+ *   GPIO_A_6      -> TFT_RESET
+ *   GPIO_A_7      -> TFT_STBY
+ *   GPIO_B_3      -> CSI_ENABLE
+ *   GPIO_B_2      -> USB_HUB_RST
  */
 &gpio4 {
-	gpio-line-names = "DIO2_IN", "DIO3_IN", "DIO4_IN", "GPIO_C_0",
+	gpio-line-names = "", "", "", "",
 			  "ETH_A_MDC", "ETH_A_MDIO", "ETH_A_RXD0", "ETH_A_RXD1",
 			  "ETH_A_RXD2", "ETH_A_RXD3", "ETH_A_RX_DV", "ETH_A_RX_CLK",
 			  "ETH_A_TXD0", "ETH_A_TXD1", "ETH_A_TXD2", "ETH_A_TXD3",
-			  "ETH_A_TX_EN", "ETH_A_TX_CLK", "DIO4_OUT", "DIO1_IN",
-			  "DIO3_OUT", "GPIO_A_6", "CAN_A_TX", "UART_A_CTS",
+			  "ETH_A_TX_EN", "ETH_A_TX_CLK", "CSI_ENABLE", "",
+			  "USB_HUB_RST", "TFT_RESET", "CAN_A_TX", "UART_A_CTS",
 			  "UART_A_RTS", "CAN_A_RX", "CAN_B_TX", "CAN_B_RX",
-			  "GPIO_A_7", "CARRIER_PWR_EN", "I2S_A_DATA_IN", "I2S_LRCLK";
+			  "TFT_STBY", "CARRIER_PWR_EN", "I2S_A_DATA_IN", "I2S_LRCLK";
+};
+
+/*
+ * Rename SoM signals according to board usage:
+ *   SPI_A_SDI	-> CAN_ADDR0
+ *   SPI_A_SDO	-> CAN_ADDR1
+ */
+&gpio5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gpio5>;
+	gpio-line-names = "I2S_BITCLK", "I2S_A_DATA_OUT", "I2S_MCLK", "PWM_2",
+			  "PWM_1", "PWM_0", "SPI_A_SCK", "CAN_ADDR1",
+			  "CAN_ADDR0", "SPI_A_CS0", "SPI_B_SCK", "SPI_B_SDO",
+			  "SPI_B_SDI", "SPI_B_CS0", "I2C_A_SCL", "I2C_A_SDA",
+			  "I2C_B_SCL", "I2C_B_SDA", "PCIE_SMCLK", "PCIE_SMDAT",
+			  "I2C_CAM_SCL", "I2C_CAM_SDA", "UART_A_RX", "UART_A_TX",
+			  "UART_C_RX", "UART_C_TX", "UART_CON_RX", "UART_CON_TX",
+			  "UART_B_RX", "UART_B_TX";
 };
 
 &hdmi_pvi {
@@ -236,8 +250,6 @@
 };
 
 &usb_dwc3_1 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&pinctrl_usb_hub>;
 	#address-cells = <1>;
 	#size-cells = <0>;
 	dr_mode = "host";
@@ -246,7 +258,7 @@
 	usb-hub@1 {
 		compatible = "usb424,2514";
 		reg = <1>;
-		reset-gpios = <&gpio3 14 GPIO_ACTIVE_LOW>;
+		reset-gpios = <&gpio4 20 GPIO_ACTIVE_LOW>;
 	};
 };
 
@@ -297,9 +309,10 @@
 		>;
 	};
 
-	pinctrl_usb_hub: usbhubgrp {
+	pinctrl_gpio5: gpio5grp {
 		fsl,pins = <
-			MX8MP_IOMUXC_NAND_DQS__GPIO3_IO14		0x46
+			MX8MP_IOMUXC_ECSPI1_MOSI__GPIO5_IO07		0x46 /* CAN_ADR0 */
+			MX8MP_IOMUXC_ECSPI1_MISO__GPIO5_IO08		0x46 /* CAN_ADR1 */
 		>;
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-lt6.dts b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-lt6.dts
index baecf768a2ee..e602c1c96143 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-lt6.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-skov-revb-lt6.dts
@@ -83,7 +83,7 @@
 		compatible = "ti,tsc2046e-adc";
 		reg = <0>;
 		pinctrl-0 = <&pinctrl_touch>;
-		pinctrl-names ="default";
+		pinctrl-names = "default";
 		spi-max-frequency = <1000000>;
 		interrupts-extended = <&gpio4 25 IRQ_TYPE_LEVEL_LOW>;
 		#io-channel-cells = <1>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-sr-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-sr-som.dtsi
new file mode 100644
index 000000000000..4e6629f940bf
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-sr-som.dtsi
@@ -0,0 +1,591 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 Josua Mayer <josua@solid-run.com>
+ */
+
+#include "imx8mp.dtsi"
+
+/ {
+	model = "SolidRun i.MX8MP SoM";
+	compatible = "solidrun,imx8mp-sr-som", "fsl,imx8mp";
+
+	chosen {
+		bootargs = "earlycon=ec_imx6q,0x30890000,115200";
+		stdout-path = &uart2;
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0 0xc0000000>,
+		      <0x1 0x00000000 0 0xc0000000>;
+	};
+
+	usdhc1_pwrseq: usdhc1-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio2 11 GPIO_ACTIVE_LOW>;
+	};
+
+	v_1_8: regulator-1-8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+
+	v_3_3: regulator-3-3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+};
+
+/*
+ * Reserve all physical memory from within the first 1GB of DDR address
+ * space to avoid panic on low memory systems.
+ */
+&dsp_reserved {
+	reg = <0 0x6f000000 0 0x1000000>;
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&eqos_pins>, <&phy0_pins>;
+	phy-mode = "rgmii-id";
+	phy = <&phy0>;
+	snps,force_thresh_dma_mode;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			reset-gpios = <&gpio4 19 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <5>;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+		};
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <5>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,priority = <0x1>;
+			snps,map-to-dma-channel = <0>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,priority = <0x2>;
+			snps,map-to-dma-channel = <1>;
+		};
+
+		queue2 {
+			snps,dcb-algorithm;
+			snps,priority = <0x4>;
+			snps,map-to-dma-channel = <2>;
+		};
+
+		queue3 {
+			snps,dcb-algorithm;
+			snps,priority = <0x8>;
+			snps,map-to-dma-channel = <3>;
+		};
+
+		queue4 {
+			snps,dcb-algorithm;
+			snps,priority = <0xf0>;
+			snps,map-to-dma-channel = <4>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&fec_pins>, <&phy1_pins>;
+	phy-mode = "rgmii-id";
+	phy = <&phy1>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0x1>;
+			reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-1 = <&i2c1_gpio_pins>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic: pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-0 = <&pmic_pins>;
+		pinctrl-names = "default";
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 GPIO_ACTIVE_LOW>;
+		nxp,i2c-lt-enable;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <2187500>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			buck4: BUCK4{
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck5: BUCK5{
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <600000>;
+				regulator-max-microvolt = <3400000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1600000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo2: LDO2 {
+				regulator-name = "LDO2";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <1150000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo3: LDO3 {
+				regulator-name = "LDO3";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	som_eeprom: eeprom@50{
+		compatible = "st,24c01", "atmel,24c01";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c2_pins>;
+	pinctrl-1 = <&i2c2_gpio_pins>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c3_pins>;
+	pinctrl-1 = <&i2c3_gpio_pins>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c4 {
+	/* routed to basler camera connector */
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&i2c4_pins>;
+	pinctrl-1 = <&i2c4_gpio_pins>;
+	scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&iomuxc {
+	eqos_pins: pinctrl-eqos-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x3
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO		0x3
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0	0x91
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1	0x91
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2	0x91
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3	0x91
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x91
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0	0x1f
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1	0x1f
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2	0x1f
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3	0x1f
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x1f
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x1f
+		>;
+	};
+
+	fec_pins: pinctrl-fec-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC		0x3
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO		0x3
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0		0x91
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1		0x91
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2		0x91
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3		0x91
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC		0x91
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL	0x91
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0		0x1f
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1		0x1f
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2		0x1f
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3		0x1f
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL	0x1f
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC		0x1f
+		>;
+	};
+
+	i2c1_pins: pinctrl-i2c1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL			0x400001c3
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA			0x400001c3
+		>;
+	};
+
+	i2c1_gpio_pins: pinctrl-i2c1-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14		0x400001c3
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15		0x400001c3
+		>;
+	};
+
+	i2c2_pins: pinctrl-i2c2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL			0x400001c3
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA			0x400001c3
+		>;
+	};
+
+	i2c2_gpio_pins: pinctrl-i2c2-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16		0x400001c3
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17		0x400001c3
+		>;
+	};
+
+	i2c3_pins: pinctrl-i2c3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL			0x400001c3
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA			0x400001c3
+		>;
+	};
+
+	i2c3_gpio_pins: pinctrl-i2c3-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18		0x400001c3
+			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19		0x400001c3
+		>;
+	};
+
+	i2c4_pins: pinctrl-i2c4-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL			0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA			0x400001c3
+		>;
+	};
+
+	i2c4_gpio_pins: pinctrl-i2c4-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20			0x400001c3
+			MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21			0x400001c3
+		>;
+	};
+
+	phy0_pins: pinctrl-phy0-grp {
+		fsl,pins = <
+			/* RESET_N: weak i/o, open drain, external 1k pull-up */
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19		0x20
+			/* INT_N: weak i/o, open drain, internal pull-up */
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18		0x160
+		>;
+	};
+
+	phy1_pins: pinctrl-phy-1-grp {
+		fsl,pins = <
+			/* RESET_N: weak i/o, open drain, external 1k pull-up */
+			MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02		0x20
+			/* INT_N: weak i/o, open drain, internal pull-up */
+			MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03		0x160
+		>;
+	};
+
+	pmic_pins: pinctrl-pmic-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03		0x41
+		>;
+	};
+
+	uart1_pins: pinctrl-uart1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART1_RXD__UART1_DCE_RX		0x140
+			MX8MP_IOMUXC_UART1_TXD__UART1_DCE_TX		0x140
+			MX8MP_IOMUXC_UART3_RXD__UART1_DCE_CTS		0x140
+			MX8MP_IOMUXC_UART3_TXD__UART1_DCE_RTS		0x140
+			/* BT_REG_ON */
+			MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10		0x0
+			/* BT_WAKE_DEV */
+			MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07		0x0
+			/* BT_WAKE_HOST */
+			MX8MP_IOMUXC_SD1_DATA6__GPIO2_IO08		0x100
+		>;
+	};
+
+	uart2_pins: pinctrl-uart2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX		0x49
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX		0x49
+		>;
+	};
+
+	usdhc1_pins: pinctrl-usdhc1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x190
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d0
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d0
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d0
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d0
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d0
+			/* WL_REG_ON */
+			MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11		0x0
+			/* WL_WAKE_HOST */
+			MX8MP_IOMUXC_SD1_DATA7__GPIO2_IO09		0x100
+		>;
+	};
+
+	usdhc1_100mhz_pins: pinctrl-usdhc1g-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x194
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d4
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d4
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d4
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d4
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d4
+		>;
+	};
+
+	usdhc1_200mhz_pins: pinctrl-usdhc1-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD1_CLK__USDHC1_CLK		0x196
+			MX8MP_IOMUXC_SD1_CMD__USDHC1_CMD		0x1d6
+			MX8MP_IOMUXC_SD1_DATA0__USDHC1_DATA0		0x1d6
+			MX8MP_IOMUXC_SD1_DATA1__USDHC1_DATA1		0x1d6
+			MX8MP_IOMUXC_SD1_DATA2__USDHC1_DATA2		0x1d6
+			MX8MP_IOMUXC_SD1_DATA3__USDHC1_DATA3		0x1d6
+		>;
+	};
+
+	usdhc3_pins: pinctrl-usdhc3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x190
+		>;
+	};
+
+	usdhc3_100mhz_pins: pinctrl-usdhc3-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x194
+		>;
+	};
+
+	usdhc3_200mhz_pins: pinctrl-usdhc3-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x196
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d6
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d6
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d6
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d6
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d6
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d6
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d6
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d6
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d6
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x196
+		>;
+	};
+
+	wdog1_pins: pinctrl-wdog1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B		0x140
+		>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	uart-has-rtscts;
+	/* select 80MHz parent clock to support maximum baudrate 4Mbps */
+	assigned-clocks = <&clk IMX8MP_CLK_UART1>;
+	assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm4345c5";
+		device-wakeup-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
+		host-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
+		shutdown-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
+		/* Murata 1MW module supports max. 3M baud */
+		max-speed = <3000000>;
+	};
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usdhc1_pins>;
+	pinctrl-1 = <&usdhc1_100mhz_pins>;
+	pinctrl-2 = <&usdhc1_200mhz_pins>;
+	vmmc-supply = <&v_3_3>;
+	vqmmc-supply = <&v_1_8>;
+	bus-width = <4>;
+	mmc-pwrseq = <&usdhc1_pwrseq>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&usdhc3_pins>;
+	pinctrl-1 = <&usdhc3_100mhz_pins>;
+	pinctrl-2 = <&usdhc3_200mhz_pins>;
+	vmmc-supply = <&v_3_3>;
+	vqmmc-supply = <&v_1_8>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wdog1_pins>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts
index d7fd9d36f824..f7346b3d35fe 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mp-ras314.dts
@@ -467,6 +467,10 @@
 	status = "okay";
 };
 
+&reg_usdhc2_vqmmc {
+	status = "okay";
+};
+
 &sai5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sai5>;
@@ -876,8 +880,7 @@
 			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d2>,
 			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d2>,
 			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d2>,
-			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d2>,
-			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d2>;
 	};
 
 	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
@@ -886,8 +889,7 @@
 			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4>,
 			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4>,
 			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4>,
-			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>,
-			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>;
 	};
 
 	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
@@ -896,8 +898,7 @@
 			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4>,
 			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4>,
 			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4>,
-			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>,
-			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>;
 	};
 
 	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
index 33cd92e63c5d..4eedd00d83b9 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
@@ -604,6 +604,10 @@
 	status = "okay";
 };
 
+&reg_usdhc2_vqmmc {
+	status = "okay";
+};
+
 &sai3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_sai3>;
@@ -983,8 +987,7 @@
 			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d2>,
 			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d2>,
 			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d2>,
-			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d2>,
-			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d2>;
 	};
 
 	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
@@ -993,8 +996,7 @@
 			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4>,
 			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4>,
 			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4>,
-			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>,
-			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>;
 	};
 
 	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
@@ -1003,8 +1005,7 @@
 			   <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0	0x1d4>,
 			   <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1	0x1d4>,
 			   <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2	0x1d4>,
-			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>,
-			   <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT	0xc0>;
+			   <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3	0x1d4>;
 	};
 
 	pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
index fd70b686e7ef..9716f24f7c6e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
@@ -16,13 +16,18 @@
 		reg = <0x0 0x40000000 0 0x80000000>;
 	};
 
-	/* identical to buck4_reg, but should never change */
-	reg_vcc3v3: regulator-vcc3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "VCC3V3";
-		regulator-min-microvolt = <3300000>;
+	reg_usdhc2_vqmmc: regulator-usdhc2-vqmmc {
+		compatible = "regulator-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vqmmc>;
+		regulator-name = "V_SD2";
+		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
+		gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
+		vin-supply = <&ldo5_reg>;
+		status = "disabled";
 	};
 };
 
@@ -173,17 +178,21 @@
 		read-only;
 		reg = <0x53>;
 		pagesize = <16>;
-		vcc-supply = <&reg_vcc3v3>;
+		vcc-supply = <&buck4_reg>;
 	};
 
 	m24c64: eeprom@57 {
 		compatible = "atmel,24c64";
 		reg = <0x57>;
 		pagesize = <32>;
-		vcc-supply = <&reg_vcc3v3>;
+		vcc-supply = <&buck4_reg>;
 	};
 };
 
+&usdhc2 {
+	vqmmc-supply = <&reg_usdhc2_vqmmc>;
+};
+
 &usdhc3 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc3>;
@@ -193,7 +202,7 @@
 	non-removable;
 	no-sd;
 	no-sdio;
-	vmmc-supply = <&reg_vcc3v3>;
+	vmmc-supply = <&buck4_reg>;
 	vqmmc-supply = <&buck5_reg>;
 	status = "okay";
 };
@@ -233,6 +242,10 @@
 		fsl,pins = <MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x10>;
 	};
 
+	pinctrl_reg_usdhc2_vqmmc: regusdhc2vqmmcgrp {
+		fsl,pins = <MX8MP_IOMUXC_GPIO1_IO04__GPIO1_IO04		0xc0>;
+	};
+
 	pinctrl_usdhc3: usdhc3grp {
 		fsl,pins = <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194>,
 			   <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4>,
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts
index afd886dd590f..88ad422c2760 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tx8p-ml81-moduline-display-106.dts
@@ -36,6 +36,24 @@
 		vout-supply = <&reg_5v0_sensor>;
 	};
 
+	flexcan1_phy: can-phy0 {
+		compatible = "ti,tcan1051", "ti,tcan1042";
+		#phy-cells = <0>;
+		pinctrl-0 = <&pinctrl_flexcan1_stby>;
+		pinctrl-names = "default";
+		max-bitrate = <5000000>;
+		standby-gpios = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+	};
+
+	flexcan2_phy: can-phy1 {
+		compatible = "ti,tcan1051", "ti,tcan1042";
+		#phy-cells = <0>;
+		pinctrl-0 = <&pinctrl_flexcan2_stby>;
+		pinctrl-names = "default";
+		max-bitrate = <5000000>;
+		standby-gpios = <&gpio5 9 GPIO_ACTIVE_HIGH>;
+	};
+
 	reg_1v8_per: regulator-1v8-per {
 		compatible = "regulator-fixed";
 		pinctrl-0 = <&pinctrl_reg_1v8>;
@@ -85,26 +103,6 @@
 		regulator-name = "6v4";
 	};
 
-	reg_can1_stby: regulator-can1-stby {
-		compatible = "regulator-fixed";
-		pinctrl-0 = <&pinctrl_flexcan1_reg>;
-		pinctrl-names = "default";
-		regulator-max-microvolt = <3300000>;
-		regulator-min-microvolt = <3300000>;
-		regulator-name = "can1-stby";
-		gpio = <&gpio4 3 GPIO_ACTIVE_LOW>;
-	};
-
-	reg_can2_stby: regulator-can2-stby {
-		compatible = "regulator-fixed";
-		pinctrl-0 = <&pinctrl_flexcan2_reg>;
-		pinctrl-names = "default";
-		regulator-max-microvolt = <3300000>;
-		regulator-min-microvolt = <3300000>;
-		regulator-name = "can2-stby";
-		gpio = <&gpio5 9 GPIO_ACTIVE_LOW>;
-	};
-
 	sound {
 		compatible = "simple-audio-card";
 		simple-audio-card,bitclock-master = <&cpudai>;
@@ -180,16 +178,16 @@
 };
 
 &flexcan1 {
+	phys = <&flexcan1_phy>;
 	pinctrl-0 = <&pinctrl_flexcan1>;
 	pinctrl-names = "default";
-	xceiver-supply = <&reg_can1_stby>;
 	status = "okay";
 };
 
 &flexcan2 {
+	phys = <&flexcan2_phy>;
 	pinctrl-0 = <&pinctrl_flexcan2>;
 	pinctrl-names = "default";
-	xceiver-supply = <&reg_can2_stby>;
 	status = "okay";
 };
 
@@ -278,7 +276,7 @@
 		>;
 	};
 
-	pinctrl_flexcan1_reg: flexcan1reggrp {
+	pinctrl_flexcan1_stby: flexcan1stbygrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03
 				(MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
@@ -294,7 +292,7 @@
 		>;
 	};
 
-	pinctrl_flexcan2_reg: flexcan2reggrp {
+	pinctrl_flexcan2_stby: flexcan2stbygrp {
 		fsl,pins = <
 			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09
 				(MX8MP_DSE_X2 | MX8MP_FSEL_FAST | MX8MP_PULL_UP | MX8MP_PULL_ENABLE)
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-ultra-mach-sbc.dts b/arch/arm64/boot/dts/freescale/imx8mp-ultra-mach-sbc.dts
new file mode 100644
index 000000000000..9ecec1a41878
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-ultra-mach-sbc.dts
@@ -0,0 +1,907 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (C) 2025 Ultratronik
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx8mp.dtsi"
+
+/ {
+	model = "NXP i.MX8MPlus Ultratronik MMI_A53 board";
+	compatible = "ultratronik,imx8mp-ultra-mach-sbc", "fsl,imx8mp";
+
+	aliases {
+		ethernet0 = &fec;
+		ethernet1 = &eqos;
+		rtc0 = &hwrtc;
+		rtc1 = &snvs_rtc;
+	};
+
+	chosen {
+		stdout-path = &uart2;
+	};
+
+	gpio-sbu-mux {
+		compatible = "nxp,cbdtu02043", "gpio-sbu-mux";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sbu_mux>;
+		select-gpios = <&gpio4 20 GPIO_ACTIVE_HIGH>;
+		enable-gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+		orientation-switch;
+
+		port {
+			usb3_data_ss: endpoint {
+				remote-endpoint = <&typec_con_ss>;
+			};
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-0 {
+			gpios = <&gpio4 27 GPIO_ACTIVE_LOW>; /* Wakeup */
+			label = "Wakeup";
+			linux,code = <KEY_WAKEUP>;
+			pinctrl-0 = <&pinctrl_gpio_key_wakeup>;
+			pinctrl-names = "default";
+			wakeup-source;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_gpio_leds>;
+
+		led1 {
+			label = "red";
+			gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led2 {
+			label = "green";
+			gpios = <&gpio4 25 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		led3 {
+			label = "yellow";
+			gpios = <&gpio4 26 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
+
+	reg_usba_vbus: regulator-usba-vbus {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_usb1>;
+		regulator-name = "usb-A-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio1 12 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&A53_0 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_1 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_2 {
+	cpu-supply = <&buck2>;
+};
+
+&A53_3 {
+	cpu-supply = <&buck2>;
+};
+
+&ecspi1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1_cs>;
+	cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	slb9670: tpm@0 {
+		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
+		reg = <0>;
+		spi-max-frequency = <32000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_slb9670>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+	};
+};
+
+&ecspi2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>;
+	cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>,
+		<&gpio1 8 GPIO_ACTIVE_LOW>,
+		<&gpio1 9 GPIO_ACTIVE_LOW>;
+	status = "okay";
+
+	nfc-transceiver@1 {
+		compatible = "st,st95hf";
+		reg = <1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_nfc>;
+		spi-max-frequency = <100000>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <7 IRQ_TYPE_EDGE_FALLING>;
+		enable-gpio = <&gpio1 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0x1>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <18 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy1>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy1: ethernet-phy@2 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0x2>;
+			interrupt-parent = <&gpio4>;
+			interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		"#TPM_IRQ", "GPIO1", "", "#PMIC_INT",
+		"SD2_VSEL", "#TOUCH_IRQ", "#NFC_INT_I", "#NFC_INT",
+		"#SPI2_CS2", "#SPI2_CS3", "#RTS4", "",
+		"USB_PWR", "GPIO2", "GPIO3", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "#SD2_CD", "", "", "",
+		"", "", "", "", "#USB-C_EN", "", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&gpio3 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "", "", "", "", "DISP_POW", "GPIO4",
+		"#", "", "", "", "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		"BKL_POW", "#ETH1_INT", "#TPM_RES", "#PCAP_RES",
+		"", "", "", "",
+		"", "", "", "", "", "", "", "",
+		"", "", "#ETH0_INT", "#USB-C_ALERT",
+		"#USB-C_SEL", "", "", "",
+		"LED_RED", "LED_GREEN", "LED_YELLOW", "#WAKEUP",
+		"", "", "", "";
+};
+
+&gpio5 {
+	gpio-line-names =
+		"", "", "", "", "", "", "", "",
+		"", "#SPI1_CS", "", "", "", "#SPI2_CS1", "", "",
+		"", "", "", "", "ENA_KAM", "ENA_LED", "", "",
+		"", "", "", "", "", "", "", "";
+};
+
+&hdmi_pvi {
+	status = "okay";
+};
+
+&hdmi_tx {
+	ddc-i2c-bus = <&i2c5>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	status = "okay";
+};
+
+&hdmi_tx_phy {
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	pmic@25 {
+		compatible = "nxp,pca9450c";
+		reg = <0x25>;
+		pinctrl-0 = <&pinctrl_pmic>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 GPIO_ACTIVE_LOW>;
+
+		/*
+		 * i.MX 8M Plus Data Sheet for Consumer Products
+		 * 3.1.4 Operating ranges
+		 * MIMX8ML8DVNLZAB
+		 */
+		regulators {
+			buck1: BUCK1 {	/* VDD_SOC (dual-phase with BUCK3) */
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1050000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {	/* VDD_ARM */
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <1000000>;
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-ramp-delay = <3125>;
+				nxp,dvs-run-voltage = <950000>;
+				nxp,dvs-standby-voltage = <850000>;
+			};
+
+			buck4: BUCK4 {	/* +3V3 */
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck5: BUCK5 {	/* +1V8 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			buck6: BUCK6 {	/* DRAM_1V1 */
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo1: LDO1 {	/* NVCC_SNVS_1V8 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo3: LDO3 {	/* VDDA_1P8 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo4: LDO4 {	/* ENET_2V5 */
+				regulator-min-microvolt = <2500000>;
+				regulator-max-microvolt = <2500000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+
+			ldo5: LDO5 {	/* NVCC_SD2 */
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-always-on;
+				regulator-boot-on;
+			};
+		};
+	};
+
+	crypto@35 {
+		compatible = "atmel,atecc508a";
+		reg = <0x35>;
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+
+	hwrtc: rtc@32 {
+		compatible = "epson,rx8900";
+		reg = <0x32>;
+		epson,vdet-disable;
+		trickle-diode-disable;
+	};
+
+	tcpc@52 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x52>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ptn5110>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <19 IRQ_TYPE_LEVEL_LOW>;
+
+		usb_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 5000, 3000)>;
+			op-sink-microwatt = <15000000>;
+			self-powered;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					typec_dr_sw: endpoint {
+						remote-endpoint = <&usb3_drd_sw>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					typec_con_ss: endpoint {
+						remote-endpoint = <&usb3_data_ss>;
+					};
+				};
+			};
+		};
+	};
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	pinctrl-1 = <&pinctrl_i2c3_gpio>;
+	scl-gpios = <&gpio5 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio5 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&i2c5 {	/* HDMI EDID bus */
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c5>;
+	pinctrl-1 = <&pinctrl_i2c5_gpio>;
+	scl-gpios = <&gpio3 26 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio3 27 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	status = "okay";
+};
+
+&lcdif3 {
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&uart2 {
+	/* system console */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&uart4 {
+	/* expansion port serial connection */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3_0 {
+	status = "okay";
+};
+
+&usb_dwc3_0 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		usb3_drd_sw: endpoint {
+			remote-endpoint = <&typec_dr_sw>;
+		};
+	};
+};
+
+&usb3_phy1 {
+	vbus-supply = <&reg_usba_vbus>;
+	status = "okay";
+};
+
+&usb3_1 {
+	status = "okay";
+};
+
+&usb_dwc3_1 {
+	dr_mode = "host";
+	snps,hsphy_interface = "utmi";
+	status = "okay";
+};
+
+&usdhc2 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC2>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	vqmmc-supply = <&ldo5>;
+	status = "okay";
+};
+
+&usdhc3 {
+	assigned-clocks = <&clk IMX8MP_CLK_USDHC3>;
+	assigned-clock-rates = <400000000>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+	vmmc-supply = <&buck4>;
+	vqmmc-supply = <&buck5>;
+	bus-width = <8>;
+	no-sd;
+	no-sdio;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	pinctrl_ecspi1_cs: ecspi1-cs-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09		0x40	/* #SPI1_CS */
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK		0x82
+			MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI		0x82
+			MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO		0x82
+		>;
+	};
+
+	pinctrl_ecspi2_cs: ecspi2-cs-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13		0x40	/* #SPI2_CS */
+			MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08		0x40	/* #SPI2_CS2 */
+			MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09		0x40	/* #SPI2_CS3 */
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK		0x82
+			MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI		0x82
+			MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO		0x82
+		>;
+	};
+
+	pinctrl_eqos: eqos-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC		0x0
+			MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO		0x0
+			MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0	0x90
+			MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1	0x90
+			MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2	0x90
+			MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3	0x90
+			MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK	0x90
+			MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL	0x90
+			MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0	0x16
+			MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1	0x16
+			MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2	0x16
+			MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3	0x16
+			MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL	0x16
+			MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x16
+			MX8MP_IOMUXC_SAI1_TXD6__GPIO4_IO18		0x10	/* #ETH0_INT */
+		>;
+	};
+
+	pinctrl_fec: fec-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC               0x0
+			MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO              0x0
+			MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0         0x90
+			MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1         0x90
+			MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2         0x90
+			MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3         0x90
+			MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC          0x90
+			MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL      0x90
+			MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0         0x16
+			MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1         0x16
+			MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2         0x16
+			MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3         0x16
+			MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL      0x16
+			MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC         0x16
+			MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01               0x10	/* #ETH1_INT */
+		>;
+	};
+
+	pinctrl_flexcan1: flexcan1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_RX__CAN1_RX			0x154
+			MX8MP_IOMUXC_SPDIF_TX__CAN1_TX			0x154
+		>;
+	};
+
+	pinctrl_gpio_key_wakeup: gpio-key-wakeup-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_MCLK__GPIO4_IO27		0x40	/* #WAKEUP */
+		>;
+	};
+
+	pinctrl_gpio_leds: gpio-leds-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24		0x40	/* LED_RED */
+			MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25		0x40	/* LED_GREEN */
+			MX8MP_IOMUXC_SAI2_TXD0__GPIO4_IO26		0x40	/* LED_YELLOW */
+		>;
+	};
+
+	pinctrl_hdmi: hdmi-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC		0x154
+			MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD		0x154
+		>;
+	};
+
+	pinctrl_hog: hog-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01	0x40	/* GPIO1 */
+			MX8MP_IOMUXC_GPIO1_IO13__GPIO1_IO13	0x40	/* GPIO2 */
+			MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14	0x40	/* GPIO3 */
+			MX8MP_IOMUXC_SAI5_RXD2__GPIO3_IO23	0x40	/* GPIO4 */
+			MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20	0x40	/* ENA_KAM */
+			MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21	0x40	/* ENA_LED */
+			MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03	0x40	/* #PCAP_RES */
+			MX8MP_IOMUXC_GPIO1_IO10__GPIO1_IO10	0x40	/* #RTS4 */
+		>;
+	};
+
+	pinctrl_i2c1: i2c1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL			0x400001c0
+			MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA			0x400001c0
+		>;
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14		0xc0
+			MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15		0xc0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL			0x400001c0
+			MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA			0x400001c0
+		>;
+	};
+
+	pinctrl_i2c2_gpio: i2c2-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16		0xc0
+			MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17		0xc0
+		>;
+	};
+
+	pinctrl_i2c3: i2c3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__I2C3_SCL			0x400001c2
+			MX8MP_IOMUXC_I2C3_SDA__I2C3_SDA			0x400001c2
+		>;
+	};
+
+	pinctrl_i2c3_gpio: i2c3-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_I2C3_SCL__GPIO5_IO18		0xc2
+			MX8MP_IOMUXC_I2C3_SDA__GPIO5_IO19		0xc2
+		>;
+	};
+
+	pinctrl_i2c5: i2c5-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__I2C5_SCL		0x400000c4
+			MX8MP_IOMUXC_HDMI_DDC_SDA__I2C5_SDA		0x400000c4
+		>;
+	};
+
+	pinctrl_i2c5_gpio: i2c5-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_HDMI_DDC_SCL__GPIO3_IO26		0xc4
+			MX8MP_IOMUXC_HDMI_DDC_SDA__GPIO3_IO27		0xc4
+		>;
+	};
+
+	pinctrl_nfc: nfc-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06		0x40	/* NFC_INT_I */
+			MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07		0x40	/* NFC_INT */
+		>;
+	};
+
+	pinctrl_pmic: pmic-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03		0x40	/* #PMIC_INT */
+		>;
+	};
+
+	pinctrl_ptn5110: ptn5110-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_TXD7__GPIO4_IO19		0x1c4	/* #USB-C_ALERT */
+		>;
+	};
+
+	pinctrl_pwm1: pwm1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SPDIF_EXT_CLK__PWM1_OUT		0x116
+		>;
+	};
+
+	pinctrl_pwm2: pwm2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT		0x116	/* EXT_PWM */
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: reg-usdhc2-vmmc-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19	0x40
+		>;
+	};
+
+	pinctrl_sbu_mux: sbu-mux-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20		0x16	/* #USB-C_SEL */
+			MX8MP_IOMUXC_SD2_WP__GPIO2_IO20			0x16	/* #USB-C_EN */
+		>;
+	};
+
+	pinctrl_slb9670: slb9670-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00		0x40	/* #TPM_IRQ */
+			MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02		0x40	/* #TPM_RES */
+		>;
+	};
+
+	pinctrl_uart2: uart2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART2_RXD__UART2_DCE_RX		0x40
+			MX8MP_IOMUXC_UART2_TXD__UART2_DCE_TX		0x40
+		>;
+	};
+
+	pinctrl_uart3: uart3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART3_RXD__UART3_DCE_RX		0x40
+			MX8MP_IOMUXC_UART3_TXD__UART3_DCE_TX		0x40
+		>;
+	};
+
+	pinctrl_uart4: uart4-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX		0x40
+			MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX		0x40
+		>;
+	};
+
+	pinctrl_usb1: usb1-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO12__GPIO1_IO12		0x40	/* USB_PWR */
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x190
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d0
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d0
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d0
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d0
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d0
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc0	/* SD2_VSEL */
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x194
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d4
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d4
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d4
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d4
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d4
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc0	/* SD2_VSEL */
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK		0x196
+			MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD		0x1d6
+			MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0		0x1d6
+			MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1		0x1d6
+			MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2		0x1d6
+			MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3		0x1d6
+			MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT		0xc0	/* SD2_VSEL */
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2-gpio-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12		0x1c4
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x190
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d0
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d0
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d0
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d0
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d0
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d0
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d0
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d0
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d0
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x190
+			MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B	0x40	/* #SD3_RESET */
+		>;
+	};
+
+	pinctrl_usdhc3_100mhz: usdhc3-100mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x194
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d4
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d4
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d4
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d4
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d4
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d4
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d4
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d4
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d4
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x194
+		>;
+	};
+
+	pinctrl_usdhc3_200mhz: usdhc3-200mhz-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK		0x192
+			MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD		0x1d2
+			MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0		0x1d2
+			MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1		0x1d2
+			MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2		0x1d2
+			MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3		0x1d2
+			MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4		0x1d2
+			MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5		0x1d2
+			MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6		0x1d2
+			MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7		0x1d2
+			MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE		0x192
+		>;
+	};
+
+	pinctrl_wdog: wdog-grp {
+		fsl,pins = <
+			MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B		0xc6	/* #WDOG */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp.dtsi b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
index bb24dba7338e..a3de6604e29f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mp.dtsi
@@ -298,7 +298,7 @@
 		cpu-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <2000>;
-			thermal-sensors = <&tmu 0>;
+			thermal-sensors = <&tmu 1>;
 			trips {
 				cpu_alert0: trip0 {
 					temperature = <85000>;
@@ -331,7 +331,7 @@
 		soc-thermal {
 			polling-delay-passive = <250>;
 			polling-delay = <2000>;
-			thermal-sensors = <&tmu 1>;
+			thermal-sensors = <&tmu 0>;
 			trips {
 				soc_alert0: trip0 {
 					temperature = <85000>;
@@ -1701,9 +1701,12 @@
 				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>,
 					 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
-					 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
-				clock-names = "isp", "aclk", "hclk";
-				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>;
+					 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>;
+				clock-names = "isp", "aclk", "hclk", "pclk";
+				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>,
+						<&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_1>;
+				power-domain-names = "isp", "csi2";
 				fsl,blk-ctrl = <&media_blk_ctrl 0>;
 				status = "disabled";
 
@@ -1723,9 +1726,12 @@
 				interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&clk IMX8MP_CLK_MEDIA_ISP_ROOT>,
 					 <&clk IMX8MP_CLK_MEDIA_AXI_ROOT>,
-					 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>;
-				clock-names = "isp", "aclk", "hclk";
-				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>;
+					 <&clk IMX8MP_CLK_MEDIA_APB_ROOT>,
+					 <&clk IMX8MP_CLK_MEDIA_CAM1_PIX_ROOT>;
+				clock-names = "isp", "aclk", "hclk", "pclk";
+				power-domains = <&media_blk_ctrl IMX8MP_MEDIABLK_PD_ISP>,
+						<&media_blk_ctrl IMX8MP_MEDIABLK_PD_MIPI_CSI2_2>;
+				power-domain-names = "isp", "csi2";
 				fsl,blk-ctrl = <&media_blk_ctrl 1>;
 				status = "disabled";
 
@@ -2045,6 +2051,10 @@
 						     "pai", "pvi", "trng",
 						     "hdmi-tx", "hdmi-tx-phy",
 						     "hdcp", "hrv";
+				interconnects = <&noc IMX8MP_ICM_HRV &noc IMX8MP_ICN_HDMI>,
+						<&noc IMX8MP_ICM_LCDIF_HDMI &noc IMX8MP_ICN_HDMI>,
+						<&noc IMX8MP_ICM_HDCP &noc IMX8MP_ICN_HDMI>;
+				interconnect-names = "hrv", "lcdif-hdmi", "hdcp";
 				#power-domain-cells = <1>;
 			};
 
@@ -2317,6 +2327,7 @@
 			compatible = "arm,gic-v3";
 			reg = <0x38800000 0x10000>,
 			      <0x38880000 0xc0000>;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index 43e45b0bd0d1..a88bc9034663 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -108,6 +108,7 @@
 		simple-audio-card,format = "i2s";
 		simple-audio-card,frame-master = <&cpudai>;
 		simple-audio-card,bitclock-master = <&cpudai>;
+		simple-audio-card,mclk-fs = <256>;
 		simple-audio-card,widgets =
 			"Line", "Left Line Out Jack",
 			"Line", "Right Line Out Jack";
@@ -117,11 +118,11 @@
 
 		cpudai: simple-audio-card,cpu {
 			sound-dai = <&sai2>;
+			system-clock-direction-out;
 		};
 
 		link_codec: simple-audio-card,codec {
 			sound-dai = <&wm8524>;
-			clocks = <&clk IMX8MQ_CLK_SAI2_ROOT>;
 		};
 	};
 
@@ -440,6 +441,11 @@
 	assigned-clocks = <&clk IMX8MQ_AUDIO_PLL1_BYPASS>, <&clk IMX8MQ_CLK_SAI2>;
 	assigned-clock-parents = <&clk IMX8MQ_AUDIO_PLL1>, <&clk IMX8MQ_AUDIO_PLL1_OUT>;
 	assigned-clock-rates = <0>, <24576000>;
+	clocks = <&clk IMX8MQ_CLK_SAI2_IPG>, <&clk IMX8MQ_CLK_DUMMY>,
+		<&clk IMX8MQ_CLK_SAI2_ROOT>, <&clk IMX8MQ_CLK_DUMMY>,
+		<&clk IMX8MQ_CLK_DUMMY>, <&clk IMX8MQ_AUDIO_PLL1_OUT>,
+		<&clk IMX8MQ_AUDIO_PLL2_OUT>;
+	clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3", "pll8k", "pll11k";
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index c9040d1131a8..607962f807be 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -1890,6 +1890,7 @@
 			      <0x31000000 0x2000>,	/* GICC */
 			      <0x31010000 0x2000>,	/* GICV */
 			      <0x31020000 0x2000>;	/* GICH */
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
index 95523c538135..202d5c67ac40 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts
@@ -406,8 +406,8 @@
 		model = "wm8960-audio";
 		audio-cpu = <&sai1>;
 		audio-codec = <&wm8960>;
-		hp-det-gpio = <&lsio_gpio0 31 GPIO_ACTIVE_HIGH>;
-		audio-routing =	"Headphone Jack", "HP_L",
+		hp-det-gpios = <&lsio_gpio0 31 GPIO_ACTIVE_HIGH>;
+		audio-routing = "Headphone Jack", "HP_L",
 				"Headphone Jack", "HP_R",
 				"Ext Spk", "SPK_LP",
 				"Ext Spk", "SPK_LN",
diff --git a/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi b/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi
index 50c0f6b0f0bd..bd6e0aa27efe 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm-ss-hsio.dtsi
@@ -30,10 +30,10 @@
 		clock-names = "dbi", "mstr", "slv";
 		bus-range = <0x00 0xff>;
 		device_type = "pci";
-		interrupt-map = <0 0 0 1 &gic 0 73 4>,
-				<0 0 0 2 &gic 0 74 4>,
-				<0 0 0 3 &gic 0 75 4>,
-				<0 0 0 4 &gic 0 76 4>;
+		interrupt-map = <0 0 0 1 &gic GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &gic GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &gic GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &gic GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-map-mask = <0 0 0 0x7>;
 		num-lanes = <1>;
 		num-viewport = <4>;
@@ -80,10 +80,10 @@
 		clock-names = "dbi", "mstr", "slv";
 		bus-range = <0x00 0xff>;
 		device_type = "pci";
-		interrupt-map = <0 0 0 1 &gic 0 105 4>,
-				<0 0 0 2 &gic 0 106 4>,
-				<0 0 0 3 &gic 0 107 4>,
-				<0 0 0 4 &gic 0 108 4>;
+		interrupt-map = <0 0 0 1 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 2 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 3 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
+				<0 0 0 4 &gic GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-map-mask = <0 0 0 0x7>;
 		num-lanes = <1>;
 		num-viewport = <4>;
diff --git a/arch/arm64/boot/dts/freescale/imx8qm.dtsi b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
index 827e1365b5da..5206ca82eaf6 100644
--- a/arch/arm64/boot/dts/freescale/imx8qm.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qm.dtsi
@@ -245,6 +245,7 @@
 		      <0x0 0x52000000 0 0x2000>,  /* GICC */
 		      <0x0 0x52010000 0 0x1000>,  /* GICH */
 		      <0x0 0x52020000 0 0x20000>; /* GICV */
+		#address-cells = <0>;
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
index e54be7f649ff..7b0337445541 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-mek.dts
@@ -333,7 +333,7 @@
 		model = "wm8960-audio";
 		audio-cpu = <&sai1>;
 		audio-codec = <&wm8960>;
-		hp-det-gpio = <&lsio_gpio1 0 GPIO_ACTIVE_HIGH>;
+		hp-det-gpios = <&lsio_gpio1 0 GPIO_ACTIVE_HIGH>;
 		audio-routing = "Headphone Jack", "HP_L",
 				"Headphone Jack", "HP_R",
 				"Ext Spk", "SPK_LP",
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index 9e46e16a8dc0..95edab058276 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -159,6 +159,7 @@
 		compatible = "arm,gic-v3";
 		reg = <0x0 0x51a00000 0 0x10000>, /* GIC Dist */
 		      <0x0 0x51b00000 0 0xc0000>; /* GICR (RD_base + SGI_base) */
+		#address-cells = <0>;
 		#interrupt-cells = <3>;
 		interrupt-controller;
 		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/freescale/imx8ulp-9x9-evk.dts b/arch/arm64/boot/dts/freescale/imx8ulp-9x9-evk.dts
new file mode 100644
index 000000000000..5497e3d78136
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8ulp-9x9-evk.dts
@@ -0,0 +1,69 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 NXP
+ */
+
+/dts-v1/;
+
+#include "imx8ulp-evk.dts"
+
+/ {
+	model = "NXP i.MX8ULP EVK9";
+	compatible = "fsl,imx8ulp-9x9-evk", "fsl,imx8ulp";
+};
+
+&btcpu {
+	sound-dai = <&sai6>;
+};
+
+&iomuxc1 {
+	pinctrl_sai6: sai6grp {
+		fsl,pins = <
+			MX8ULP_PAD_PTE10__I2S6_TX_BCLK  0x43
+			MX8ULP_PAD_PTE11__I2S6_TX_FS    0x43
+			MX8ULP_PAD_PTE14__I2S6_TXD2     0x43
+			MX8ULP_PAD_PTE6__I2S6_RXD0      0x43
+		>;
+	};
+};
+
+&pinctrl_enet {
+	fsl,pins = <
+		MX8ULP_PAD_PTF9__ENET0_MDC		0x43
+		MX8ULP_PAD_PTF8__ENET0_MDIO             0x43
+		MX8ULP_PAD_PTF5__ENET0_RXER             0x43
+		MX8ULP_PAD_PTF6__ENET0_CRS_DV           0x43
+		MX8ULP_PAD_PTF1__ENET0_RXD0             0x43
+		MX8ULP_PAD_PTF0__ENET0_RXD1             0x43
+		MX8ULP_PAD_PTF4__ENET0_TXEN             0x43
+		MX8ULP_PAD_PTF3__ENET0_TXD0             0x43
+		MX8ULP_PAD_PTF2__ENET0_TXD1             0x43
+		MX8ULP_PAD_PTF7__ENET0_REFCLK           0x43
+		MX8ULP_PAD_PTF10__ENET0_1588_CLKIN      0x43
+	>;
+};
+
+&pinctrl_usb1 {
+	fsl,pins = <
+		MX8ULP_PAD_PTE16__USB0_ID		0x10003
+		MX8ULP_PAD_PTE18__USB0_OC		0x10003
+	>;
+};
+
+&pinctrl_usb2 {
+	fsl,pins = <
+		MX8ULP_PAD_PTD23__USB1_ID		0x10003
+		MX8ULP_PAD_PTE20__USB1_OC		0x10003
+	>;
+};
+
+&sai6 {
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_sai6>;
+	pinctrl-1 = <&pinctrl_sai6>;
+	assigned-clocks = <&cgc1 IMX8ULP_CLK_SPLL3_PFD1_DIV1>, <&cgc2 IMX8ULP_CLK_SAI6_SEL>;
+	assigned-clock-parents = <0>, <&cgc1 IMX8ULP_CLK_SPLL3_PFD1_DIV1>;
+	assigned-clock-rates = <12288000>;
+	fsl,dataline = <1 0x01 0x04>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
index e602d147e39b..8e9e841cc828 100644
--- a/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8x-colibri.dtsi
@@ -462,11 +462,11 @@
 
 /* VPU Mailboxes */
 &mu_m0 {
-	status="okay";
+	status = "okay";
 };
 
 &mu1_m0 {
-	status="okay";
+	status = "okay";
 };
 
 /* TODO MIPI CSI */
diff --git a/arch/arm64/boot/dts/freescale/imx91-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx91-11x11-evk.dts
new file mode 100644
index 000000000000..aca78768dbd4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx91-11x11-evk.dts
@@ -0,0 +1,674 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 NXP
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/usb/pd.h>
+#include "imx91.dtsi"
+
+/ {
+	compatible = "fsl,imx91-11x11-evk", "fsl,imx91";
+	model = "NXP i.MX91 11X11 EVK board";
+
+	aliases {
+		ethernet0 = &fec;
+		ethernet1 = &eqos;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		rtc0 = &bbnsm_rtc;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		serial2 = &lpuart3;
+		serial3 = &lpuart4;
+		serial4 = &lpuart5;
+	};
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	reg_vref_1v8: regulator-adc-vref {
+		compatible = "regulator-fixed";
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "vref_1v8";
+	};
+
+	reg_audio_pwr: regulator-audio-pwr {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "audio-pwr";
+		gpio = <&adp5585 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		off-on-delay-us = <12000>;
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		pinctrl-names = "default";
+		regulator-max-microvolt = <3300000>;
+		regulator-min-microvolt = <3300000>;
+		regulator-name = "VSD_3V3";
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reserved-memory {
+		ranges;
+		#address-cells = <2>;
+		#size-cells = <2>;
+
+		linux,cma {
+			compatible = "shared-dma-pool";
+			alloc-ranges = <0 0x80000000 0 0x40000000>;
+			reusable;
+			size = <0 0x10000000>;
+			linux,cma-default;
+		};
+	};
+};
+
+&adc1 {
+	vref-supply = <&reg_vref_1v8>;
+	status = "okay";
+};
+
+&eqos {
+	phy-handle = <&ethphy1>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_eqos>;
+	pinctrl-1 = <&pinctrl_eqos_sleep>;
+	pinctrl-names = "default", "sleep";
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <5000000>;
+
+		ethphy1: ethernet-phy@1 {
+			reg = <1>;
+			realtek,clkout-disable;
+		};
+	};
+};
+
+&fec {
+	phy-handle = <&ethphy2>;
+	phy-mode = "rgmii-id";
+	pinctrl-0 = <&pinctrl_fec>;
+	pinctrl-1 = <&pinctrl_fec_sleep>;
+	pinctrl-names = "default", "sleep";
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <5000000>;
+
+		ethphy2: ethernet-phy@2 {
+			reg = <2>;
+			realtek,clkout-disable;
+		};
+	};
+};
+
+&lpi2c1 {
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	audio_codec: wm8962@1a {
+		compatible = "wlf,wm8962";
+		reg = <0x1a>;
+		clocks = <&clk IMX93_CLK_SAI3_GATE>;
+		AVDD-supply = <&reg_audio_pwr>;
+		CPVDD-supply = <&reg_audio_pwr>;
+		DBVDD-supply = <&reg_audio_pwr>;
+		DCVDD-supply = <&reg_audio_pwr>;
+		MICVDD-supply = <&reg_audio_pwr>;
+		PLLVDD-supply = <&reg_audio_pwr>;
+		SPKVDD1-supply = <&reg_audio_pwr>;
+		SPKVDD2-supply = <&reg_audio_pwr>;
+		gpio-cfg = <
+			0x0000 /* 0:Default */
+			0x0000 /* 1:Default */
+			0x0000 /* 2:FN_DMICCLK */
+			0x0000 /* 3:Default */
+			0x0000 /* 4:FN_DMICCDAT */
+			0x0000 /* 5:Default */
+		>;
+	};
+
+	inertial-meter@6a {
+		compatible = "st,lsm6dso";
+		reg = <0x6a>;
+	};
+};
+
+&lpi2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c2>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	pcal6524: gpio@22 {
+		compatible = "nxp,pcal6524";
+		reg = <0x22>;
+		#interrupt-cells = <2>;
+		interrupt-controller;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		interrupt-parent = <&gpio3>;
+		pinctrl-0 = <&pinctrl_pcal6524>;
+		pinctrl-names = "default";
+	};
+
+	pmic@25 {
+		compatible = "nxp,pca9451a";
+		reg = <0x25>;
+		interrupts = <11 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&pcal6524>;
+
+		regulators {
+			buck1: BUCK1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <2237500>;
+				regulator-min-microvolt = <650000>;
+				regulator-name = "BUCK1";
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck2: BUCK2 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <2187500>;
+				regulator-min-microvolt = <600000>;
+				regulator-name = "BUCK2";
+				regulator-ramp-delay = <3125>;
+			};
+
+			buck4: BUCK4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3400000>;
+				regulator-min-microvolt = <600000>;
+				regulator-name = "BUCK4";
+			};
+
+			buck5: BUCK5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3400000>;
+				regulator-min-microvolt = <600000>;
+				regulator-name = "BUCK5";
+			};
+
+			buck6: BUCK6 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3400000>;
+				regulator-min-microvolt = <600000>;
+				regulator-name = "BUCK6";
+			};
+
+			ldo1: LDO1 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1600000>;
+				regulator-name = "LDO1";
+			};
+
+			ldo4: LDO4 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <800000>;
+				regulator-name = "LDO4";
+			};
+
+			ldo5: LDO5 {
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-max-microvolt = <3300000>;
+				regulator-min-microvolt = <1800000>;
+				regulator-name = "LDO5";
+			};
+		};
+	};
+
+	adp5585: io-expander@34 {
+		compatible = "adi,adp5585-00", "adi,adp5585";
+		reg = <0x34>;
+		#gpio-cells = <2>;
+		gpio-controller;
+		#pwm-cells = <3>;
+		gpio-reserved-ranges = <5 1>;
+
+		exp-sel-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_HIGH>;
+			output-low;
+		};
+	};
+};
+
+&lpi2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	ptn5110: tcpc@50 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x50>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio3>;
+
+		typec1_con: connector {
+			compatible = "usb-c-connector";
+			data-role = "dual";
+			label = "USB-C";
+			op-sink-microwatt = <15000000>;
+			power-role = "dual";
+			self-powered;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 20000, 3000)>;
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			try-power-role = "sink";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					typec1_dr_sw: endpoint {
+						remote-endpoint = <&usb1_drd_sw>;
+					};
+				};
+			};
+		};
+	};
+
+	ptn5110_2: tcpc@51 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x51>;
+		interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-parent = <&gpio3>;
+		status = "okay";
+
+		typec2_con: connector {
+			compatible = "usb-c-connector";
+			data-role = "dual";
+			label = "USB-C";
+			op-sink-microwatt = <15000000>;
+			power-role = "dual";
+			self-powered;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_VAR(5000, 20000, 3000)>;
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			try-power-role = "sink";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					typec2_dr_sw: endpoint {
+						remote-endpoint = <&usb2_drd_sw>;
+					};
+				};
+			};
+		};
+	};
+
+	pcf2131: rtc@53 {
+		compatible = "nxp,pcf2131";
+		reg = <0x53>;
+		interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-parent = <&pcal6524>;
+		status = "okay";
+	};
+};
+
+&lpuart1 {
+	pinctrl-0 = <&pinctrl_uart1>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&lpuart5 {
+	pinctrl-0 = <&pinctrl_uart5>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	bluetooth {
+		compatible = "nxp,88w8987-bt";
+	};
+};
+
+&usbotg1 {
+	adp-disable;
+	disable-over-current;
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	usb-role-switch;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	status = "okay";
+
+	port {
+		usb1_drd_sw: endpoint {
+			remote-endpoint = <&typec1_dr_sw>;
+		};
+	};
+};
+
+&usbotg2 {
+	adp-disable;
+	disable-over-current;
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	usb-role-switch;
+	samsung,picophy-dc-vol-level-adjust = <7>;
+	samsung,picophy-pre-emp-curr-control = <3>;
+	status = "okay";
+
+	port {
+		usb2_drd_sw: endpoint {
+			remote-endpoint = <&typec2_dr_sw>;
+		};
+	};
+};
+
+&usdhc1 {
+	bus-width = <8>;
+	non-removable;
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	status = "okay";
+};
+
+&usdhc2 {
+	bus-width = <4>;
+	cd-gpios = <&gpio3 00 GPIO_ACTIVE_LOW>;
+	no-mmc;
+	no-sdio;
+	pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-3 = <&pinctrl_usdhc2_sleep>, <&pinctrl_usdhc2_gpio_sleep>;
+	pinctrl-names = "default", "state_100mhz", "state_200mhz", "sleep";
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	status = "okay";
+};
+
+&wdog3 {
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = <
+			MX91_PAD_ENET1_MDC__ENET1_MDC                           0x57e
+			MX91_PAD_ENET1_MDIO__ENET_QOS_MDIO                      0x57e
+			MX91_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0                  0x57e
+			MX91_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1                  0x57e
+			MX91_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2                  0x57e
+			MX91_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3                  0x57e
+			MX91_PAD_ENET1_RXC__ENET_QOS_RGMII_RXC                  0x5fe
+			MX91_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL            0x57e
+			MX91_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0                  0x57e
+			MX91_PAD_ENET1_TD1__ENET1_RGMII_TD1                     0x57e
+			MX91_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2                  0x57e
+			MX91_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3                  0x57e
+			MX91_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK  0x5fe
+			MX91_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL            0x57e
+		>;
+	};
+
+	pinctrl_eqos_sleep: eqossleepgrp {
+		fsl,pins = <
+			MX91_PAD_ENET1_MDC__GPIO4_IO0                           0x31e
+			MX91_PAD_ENET1_MDIO__GPIO4_IO1                          0x31e
+			MX91_PAD_ENET1_RD0__GPIO4_IO10                          0x31e
+			MX91_PAD_ENET1_RD1__GPIO4_IO11                          0x31e
+			MX91_PAD_ENET1_RD2__GPIO4_IO12                          0x31e
+			MX91_PAD_ENET1_RD3__GPIO4_IO13                          0x31e
+			MX91_PAD_ENET1_RXC__GPIO4_IO9                           0x31e
+			MX91_PAD_ENET1_RX_CTL__GPIO4_IO8                        0x31e
+			MX91_PAD_ENET1_TD0__GPIO4_IO5                           0x31e
+			MX91_PAD_ENET1_TD1__GPIO4_IO4                           0x31e
+			MX91_PAD_ENET1_TD2__GPIO4_IO3                           0x31e
+			MX91_PAD_ENET1_TD3__GPIO4_IO2                           0x31e
+			MX91_PAD_ENET1_TXC__GPIO4_IO7                           0x31e
+			MX91_PAD_ENET1_TX_CTL__GPIO4_IO6                        0x31e
+		>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = <
+			MX91_PAD_ENET2_MDC__ENET2_MDC                           0x57e
+			MX91_PAD_ENET2_MDIO__ENET2_MDIO                         0x57e
+			MX91_PAD_ENET2_RD0__ENET2_RGMII_RD0                     0x57e
+			MX91_PAD_ENET2_RD1__ENET2_RGMII_RD1                     0x57e
+			MX91_PAD_ENET2_RD2__ENET2_RGMII_RD2                     0x57e
+			MX91_PAD_ENET2_RD3__ENET2_RGMII_RD3                     0x57e
+			MX91_PAD_ENET2_RXC__ENET2_RGMII_RXC                     0x5fe
+			MX91_PAD_ENET2_RX_CTL__ENET2_RGMII_RX_CTL               0x57e
+			MX91_PAD_ENET2_TD0__ENET2_RGMII_TD0                     0x57e
+			MX91_PAD_ENET2_TD1__ENET2_RGMII_TD1                     0x57e
+			MX91_PAD_ENET2_TD2__ENET2_RGMII_TD2                     0x57e
+			MX91_PAD_ENET2_TD3__ENET2_RGMII_TD3                     0x57e
+			MX91_PAD_ENET2_TXC__ENET2_RGMII_TXC                     0x5fe
+			MX91_PAD_ENET2_TX_CTL__ENET2_RGMII_TX_CTL               0x57e
+		>;
+	};
+
+	pinctrl_fec_sleep: fecsleepgrp {
+		fsl,pins = <
+			MX91_PAD_ENET2_MDC__GPIO4_IO14                          0x51e
+			MX91_PAD_ENET2_MDIO__GPIO4_IO15                         0x51e
+			MX91_PAD_ENET2_RD0__GPIO4_IO24                          0x51e
+			MX91_PAD_ENET2_RD1__GPIO4_IO25                          0x51e
+			MX91_PAD_ENET2_RD2__GPIO4_IO26                          0x51e
+			MX91_PAD_ENET2_RD3__GPIO4_IO27                          0x51e
+			MX91_PAD_ENET2_RXC__GPIO4_IO23                          0x51e
+			MX91_PAD_ENET2_RX_CTL__GPIO4_IO22                       0x51e
+			MX91_PAD_ENET2_TD0__GPIO4_IO19                          0x51e
+			MX91_PAD_ENET2_TD1__GPIO4_IO18                          0x51e
+			MX91_PAD_ENET2_TD2__GPIO4_IO17                          0x51e
+			MX91_PAD_ENET2_TD3__GPIO4_IO16                          0x51e
+			MX91_PAD_ENET2_TXC__GPIO4_IO21                          0x51e
+			MX91_PAD_ENET2_TX_CTL__GPIO4_IO20                       0x51e
+		>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = <
+			MX91_PAD_I2C1_SCL__LPI2C1_SCL                           0x40000b9e
+			MX91_PAD_I2C1_SDA__LPI2C1_SDA                           0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c2: lpi2c2grp {
+		fsl,pins = <
+			MX91_PAD_I2C2_SCL__LPI2C2_SCL                           0x40000b9e
+			MX91_PAD_I2C2_SDA__LPI2C2_SDA                           0x40000b9e
+		>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = <
+			MX91_PAD_GPIO_IO28__LPI2C3_SDA                          0x40000b9e
+			MX91_PAD_GPIO_IO29__LPI2C3_SCL                          0x40000b9e
+		>;
+	};
+
+	pinctrl_pcal6524: pcal6524grp {
+		fsl,pins = <
+			MX91_PAD_CCM_CLKO2__GPIO3_IO27                          0x31e
+		>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = <
+			MX91_PAD_SD2_RESET_B__GPIO3_IO7                         0x31e
+		>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX91_PAD_UART1_RXD__LPUART1_RX                          0x31e
+			MX91_PAD_UART1_TXD__LPUART1_TX                          0x31e
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX91_PAD_DAP_TDO_TRACESWO__LPUART5_TX                   0x31e
+			MX91_PAD_DAP_TDI__LPUART5_RX                            0x31e
+			MX91_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B                   0x31e
+			MX91_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B                  0x31e
+		>;
+	};
+
+	pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp {
+		fsl,pins = <
+			MX91_PAD_SD1_CLK__USDHC1_CLK                            0x158e
+			MX91_PAD_SD1_CMD__USDHC1_CMD                            0x138e
+			MX91_PAD_SD1_DATA0__USDHC1_DATA0                        0x138e
+			MX91_PAD_SD1_DATA1__USDHC1_DATA1                        0x138e
+			MX91_PAD_SD1_DATA2__USDHC1_DATA2                        0x138e
+			MX91_PAD_SD1_DATA3__USDHC1_DATA3                        0x138e
+			MX91_PAD_SD1_DATA4__USDHC1_DATA4                        0x138e
+			MX91_PAD_SD1_DATA5__USDHC1_DATA5                        0x138e
+			MX91_PAD_SD1_DATA6__USDHC1_DATA6                        0x138e
+			MX91_PAD_SD1_DATA7__USDHC1_DATA7                        0x138e
+			MX91_PAD_SD1_STROBE__USDHC1_STROBE                      0x158e
+		>;
+	};
+
+	pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp {
+		fsl,pins = <
+			MX91_PAD_SD1_CLK__USDHC1_CLK                            0x15fe
+			MX91_PAD_SD1_CMD__USDHC1_CMD                            0x13fe
+			MX91_PAD_SD1_DATA0__USDHC1_DATA0                        0x13fe
+			MX91_PAD_SD1_DATA1__USDHC1_DATA1                        0x13fe
+			MX91_PAD_SD1_DATA2__USDHC1_DATA2                        0x13fe
+			MX91_PAD_SD1_DATA3__USDHC1_DATA3                        0x13fe
+			MX91_PAD_SD1_DATA4__USDHC1_DATA4                        0x13fe
+			MX91_PAD_SD1_DATA5__USDHC1_DATA5                        0x13fe
+			MX91_PAD_SD1_DATA6__USDHC1_DATA6                        0x13fe
+			MX91_PAD_SD1_DATA7__USDHC1_DATA7                        0x13fe
+			MX91_PAD_SD1_STROBE__USDHC1_STROBE                      0x15fe
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX91_PAD_SD1_CLK__USDHC1_CLK                            0x1582
+			MX91_PAD_SD1_CMD__USDHC1_CMD                            0x1382
+			MX91_PAD_SD1_DATA0__USDHC1_DATA0                        0x1382
+			MX91_PAD_SD1_DATA1__USDHC1_DATA1                        0x1382
+			MX91_PAD_SD1_DATA2__USDHC1_DATA2                        0x1382
+			MX91_PAD_SD1_DATA3__USDHC1_DATA3                        0x1382
+			MX91_PAD_SD1_DATA4__USDHC1_DATA4                        0x1382
+			MX91_PAD_SD1_DATA5__USDHC1_DATA5                        0x1382
+			MX91_PAD_SD1_DATA6__USDHC1_DATA6                        0x1382
+			MX91_PAD_SD1_DATA7__USDHC1_DATA7                        0x1382
+			MX91_PAD_SD1_STROBE__USDHC1_STROBE                      0x1582
+		>;
+	};
+
+	pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+		fsl,pins = <
+			MX91_PAD_SD2_CLK__USDHC2_CLK                            0x158e
+			MX91_PAD_SD2_CMD__USDHC2_CMD                            0x138e
+			MX91_PAD_SD2_DATA0__USDHC2_DATA0                        0x138e
+			MX91_PAD_SD2_DATA1__USDHC2_DATA1                        0x138e
+			MX91_PAD_SD2_DATA2__USDHC2_DATA2                        0x138e
+			MX91_PAD_SD2_DATA3__USDHC2_DATA3                        0x138e
+			MX91_PAD_SD2_VSELECT__USDHC2_VSELECT                    0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+		fsl,pins = <
+			MX91_PAD_SD2_CLK__USDHC2_CLK                            0x15fe
+			MX91_PAD_SD2_CMD__USDHC2_CMD                            0x13fe
+			MX91_PAD_SD2_DATA0__USDHC2_DATA0                        0x13fe
+			MX91_PAD_SD2_DATA1__USDHC2_DATA1                        0x13fe
+			MX91_PAD_SD2_DATA2__USDHC2_DATA2                        0x13fe
+			MX91_PAD_SD2_DATA3__USDHC2_DATA3                        0x13fe
+			MX91_PAD_SD2_VSELECT__USDHC2_VSELECT                    0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = <
+			MX91_PAD_SD2_CD_B__GPIO3_IO0                            0x31e
+		>;
+	};
+
+	pinctrl_usdhc2_gpio_sleep: usdhc2gpiosleepgrp {
+		fsl,pins = <
+			MX91_PAD_SD2_CD_B__GPIO3_IO0                            0x51e
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX91_PAD_SD2_CLK__USDHC2_CLK                            0x1582
+			MX91_PAD_SD2_CMD__USDHC2_CMD                            0x1382
+			MX91_PAD_SD2_DATA0__USDHC2_DATA0                        0x1382
+			MX91_PAD_SD2_DATA1__USDHC2_DATA1                        0x1382
+			MX91_PAD_SD2_DATA2__USDHC2_DATA2                        0x1382
+			MX91_PAD_SD2_DATA3__USDHC2_DATA3                        0x1382
+			MX91_PAD_SD2_VSELECT__USDHC2_VSELECT                    0x51e
+		>;
+	};
+
+	pinctrl_usdhc2_sleep: usdhc2sleepgrp {
+		fsl,pins = <
+			MX91_PAD_SD2_CLK__GPIO3_IO1                             0x51e
+			MX91_PAD_SD2_CMD__GPIO3_IO2                             0x51e
+			MX91_PAD_SD2_DATA0__GPIO3_IO3                           0x51e
+			MX91_PAD_SD2_DATA1__GPIO3_IO4                           0x51e
+			MX91_PAD_SD2_DATA2__GPIO3_IO5                           0x51e
+			MX91_PAD_SD2_DATA3__GPIO3_IO6                           0x51e
+			MX91_PAD_SD2_VSELECT__GPIO3_IO19                        0x51e
+		>;
+	};
+
+};
diff --git a/arch/arm64/boot/dts/freescale/imx91-pinfunc.h b/arch/arm64/boot/dts/freescale/imx91-pinfunc.h
new file mode 100644
index 000000000000..3e19945f5ce3
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx91-pinfunc.h
@@ -0,0 +1,770 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+/*
+ * Copyright 2025 NXP
+ */
+
+#ifndef __DTS_IMX91_PINFUNC_H
+#define __DTS_IMX91_PINFUNC_H
+
+/*
+ * The pin function ID is a tuple of
+ * <mux_reg conf_reg input_reg mux_mode input_val>
+ */
+#define MX91_PAD_DAP_TDI__JTAG_MUX_TDI                                           0x0000 0x01b0 0x03d8 0x00 0x00
+#define MX91_PAD_DAP_TDI__MQS2_LEFT                                              0x0000 0x01b0 0x0000 0x01 0x00
+#define MX91_PAD_DAP_TDI__CAN2_TX                                                0x0000 0x01b0 0x0000 0x03 0x00
+#define MX91_PAD_DAP_TDI__FLEXIO2_FLEXIO30                                       0x0000 0x01b0 0x0000 0x04 0x00
+#define MX91_PAD_DAP_TDI__GPIO3_IO28                                             0x0000 0x01b0 0x0000 0x05 0x00
+#define MX91_PAD_DAP_TDI__LPUART5_RX                                             0x0000 0x01b0 0x0488 0x06 0x00
+
+#define MX91_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS                                     0x0004 0x01b4 0x03dc 0x00 0x00
+#define MX91_PAD_DAP_TMS_SWDIO__FLEXIO2_FLEXIO31                                 0x0004 0x01b4 0x0000 0x04 0x00
+#define MX91_PAD_DAP_TMS_SWDIO__GPIO3_IO29                                       0x0004 0x01b4 0x0000 0x05 0x00
+#define MX91_PAD_DAP_TMS_SWDIO__LPUART5_RTS_B                                    0x0004 0x01b4 0x0000 0x06 0x00
+
+#define MX91_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK                                    0x0008 0x01b8 0x03d4 0x00 0x00
+#define MX91_PAD_DAP_TCLK_SWCLK__FLEXIO1_FLEXIO30                                0x0008 0x01b8 0x0000 0x04 0x00
+#define MX91_PAD_DAP_TCLK_SWCLK__GPIO3_IO30                                      0x0008 0x01b8 0x0000 0x05 0x00
+#define MX91_PAD_DAP_TCLK_SWCLK__LPUART5_CTS_B                                   0x0008 0x01b8 0x0484 0x06 0x00
+
+#define MX91_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO                                  0x000c 0x01bc 0x0000 0x00 0x00
+#define MX91_PAD_DAP_TDO_TRACESWO__MQS2_RIGHT                                    0x000c 0x01bc 0x0000 0x01 0x00
+#define MX91_PAD_DAP_TDO_TRACESWO__CAN2_RX                                       0x000c 0x01bc 0x0364 0x03 0x00
+#define MX91_PAD_DAP_TDO_TRACESWO__FLEXIO1_FLEXIO31                              0x000c 0x01bc 0x0000 0x04 0x00
+#define MX91_PAD_DAP_TDO_TRACESWO__GPIO3_IO31                                    0x000c 0x01bc 0x0000 0x05 0x00
+#define MX91_PAD_DAP_TDO_TRACESWO__LPUART5_TX                                    0x000c 0x01bc 0x048c 0x06 0x00
+
+#define MX91_PAD_GPIO_IO00__GPIO2_IO0                                            0x0010 0x01c0 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO00__LPI2C3_SDA                                           0x0010 0x01c0 0x03f4 0x01 0x00
+#define MX91_PAD_GPIO_IO00__MEDIAMIX_CAM_CLK                                     0x0010 0x01c0 0x04bc 0x02 0x00
+#define MX91_PAD_GPIO_IO00__MEDIAMIX_DISP_CLK                                    0x0010 0x01c0 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO00__LPSPI6_PCS0                                          0x0010 0x01c0 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO00__LPUART5_TX                                           0x0010 0x01c0 0x048c 0x05 0x01
+#define MX91_PAD_GPIO_IO00__LPI2C5_SDA                                           0x0010 0x01c0 0x0404 0x06 0x00
+#define MX91_PAD_GPIO_IO00__FLEXIO1_FLEXIO0                                      0x0010 0x01c0 0x036c 0x07 0x00
+
+#define MX91_PAD_GPIO_IO01__GPIO2_IO1                                            0x0014 0x01c4 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO01__LPI2C3_SCL                                           0x0014 0x01c4 0x03f0 0x01 0x00
+#define MX91_PAD_GPIO_IO01__MEDIAMIX_CAM_DATA0                                   0x0014 0x01c4 0x0490 0x02 0x00
+#define MX91_PAD_GPIO_IO01__MEDIAMIX_DISP_DE                                     0x0014 0x01c4 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO01__LPSPI6_SIN                                           0x0014 0x01c4 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO01__LPUART5_RX                                           0x0014 0x01c4 0x0488 0x05 0x01
+#define MX91_PAD_GPIO_IO01__LPI2C5_SCL                                           0x0014 0x01c4 0x0400 0x06 0x00
+#define MX91_PAD_GPIO_IO01__FLEXIO1_FLEXIO1                                      0x0014 0x01c4 0x0370 0x07 0x00
+
+#define MX91_PAD_GPIO_IO02__GPIO2_IO2                                            0x0018 0x01c8 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO02__LPI2C4_SDA                                           0x0018 0x01c8 0x03fc 0x01 0x00
+#define MX91_PAD_GPIO_IO02__MEDIAMIX_CAM_VSYNC                                   0x0018 0x01c8 0x04c0 0x02 0x00
+#define MX91_PAD_GPIO_IO02__MEDIAMIX_DISP_VSYNC                                  0x0018 0x01c8 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO02__LPSPI6_SOUT                                          0x0018 0x01c8 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO02__LPUART5_CTS_B                                        0x0018 0x01c8 0x0484 0x05 0x01
+#define MX91_PAD_GPIO_IO02__LPI2C6_SDA                                           0x0018 0x01c8 0x040c 0x06 0x00
+#define MX91_PAD_GPIO_IO02__FLEXIO1_FLEXIO2                                      0x0018 0x01c8 0x0374 0x07 0x00
+
+#define MX91_PAD_GPIO_IO03__GPIO2_IO3                                            0x001c 0x01cc 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO03__LPI2C4_SCL                                           0x001c 0x01cc 0x03f8 0x01 0x00
+#define MX91_PAD_GPIO_IO03__MEDIAMIX_CAM_HSYNC                                   0x001c 0x01cc 0x04b8 0x02 0x00
+#define MX91_PAD_GPIO_IO03__MEDIAMIX_DISP_HSYNC                                  0x001c 0x01cc 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO03__LPSPI6_SCK                                           0x001c 0x01cc 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO03__LPUART5_RTS_B                                        0x001c 0x01cc 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO03__LPI2C6_SCL                                           0x001c 0x01cc 0x0408 0x06 0x00
+#define MX91_PAD_GPIO_IO03__FLEXIO1_FLEXIO3                                      0x001c 0x01cc 0x0378 0x07 0x00
+
+#define MX91_PAD_GPIO_IO04__GPIO2_IO4                                            0x0020 0x01d0 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO04__TPM3_CH0                                             0x0020 0x01d0 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO04__PDM_CLK                                              0x0020 0x01d0 0x0000 0x02 0x00
+#define MX91_PAD_GPIO_IO04__MEDIAMIX_DISP_DATA0                                  0x0020 0x01d0 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO04__LPSPI7_PCS0                                          0x0020 0x01d0 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO04__LPUART6_TX                                           0x0020 0x01d0 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO04__LPI2C6_SDA                                           0x0020 0x01d0 0x040c 0x06 0x01
+#define MX91_PAD_GPIO_IO04__FLEXIO1_FLEXIO4                                      0x0020 0x01d0 0x037c 0x07 0x00
+
+#define MX91_PAD_GPIO_IO05__GPIO2_IO5                                            0x0024 0x01d4 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO05__TPM4_CH0                                             0x0024 0x01d4 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO05__PDM_BIT_STREAM0                                      0x0024 0x01d4 0x04c4 0x02 0x00
+#define MX91_PAD_GPIO_IO05__MEDIAMIX_DISP_DATA1                                  0x0024 0x01d4 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO05__LPSPI7_SIN                                           0x0024 0x01d4 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO05__LPUART6_RX                                           0x0024 0x01d4 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO05__LPI2C6_SCL                                           0x0024 0x01d4 0x0408 0x06 0x01
+#define MX91_PAD_GPIO_IO05__FLEXIO1_FLEXIO5                                      0x0024 0x01d4 0x0380 0x07 0x00
+
+#define MX91_PAD_GPIO_IO06__GPIO2_IO6                                            0x0028 0x01d8 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO06__TPM5_CH0                                             0x0028 0x01d8 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO06__PDM_BIT_STREAM1                                      0x0028 0x01d8 0x04c8 0x02 0x00
+#define MX91_PAD_GPIO_IO06__MEDIAMIX_DISP_DATA2                                  0x0028 0x01d8 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO06__LPSPI7_SOUT                                          0x0028 0x01d8 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO06__LPUART6_CTS_B                                        0x0028 0x01d8 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO06__LPI2C7_SDA                                           0x0028 0x01d8 0x0414 0x06 0x00
+#define MX91_PAD_GPIO_IO06__FLEXIO1_FLEXIO6                                      0x0028 0x01d8 0x0384 0x07 0x00
+
+#define MX91_PAD_GPIO_IO07__GPIO2_IO7                                            0x002c 0x01dc 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO07__LPSPI3_PCS1                                          0x002c 0x01dc 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO07__MEDIAMIX_CAM_DATA1                                   0x002c 0x01dc 0x0494 0x02 0x00
+#define MX91_PAD_GPIO_IO07__MEDIAMIX_DISP_DATA3                                  0x002c 0x01dc 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO07__LPSPI7_SCK                                           0x002c 0x01dc 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO07__LPUART6_RTS_B                                        0x002c 0x01dc 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO07__LPI2C7_SCL                                           0x002c 0x01dc 0x0410 0x06 0x00
+#define MX91_PAD_GPIO_IO07__FLEXIO1_FLEXIO7                                      0x002c 0x01dc 0x0388 0x07 0x00
+
+#define MX91_PAD_GPIO_IO08__GPIO2_IO8                                            0x0030 0x01e0 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO08__LPSPI3_PCS0                                          0x0030 0x01e0 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO08__MEDIAMIX_CAM_DATA2                                   0x0030 0x01e0 0x0498 0x02 0x00
+#define MX91_PAD_GPIO_IO08__MEDIAMIX_DISP_DATA4                                  0x0030 0x01e0 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO08__TPM6_CH0                                             0x0030 0x01e0 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO08__LPUART7_TX                                           0x0030 0x01e0 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO08__LPI2C7_SDA                                           0x0030 0x01e0 0x0414 0x06 0x01
+#define MX91_PAD_GPIO_IO08__FLEXIO1_FLEXIO8                                      0x0030 0x01e0 0x038c 0x07 0x00
+
+#define MX91_PAD_GPIO_IO09__GPIO2_IO9                                            0x0034 0x01e4 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO09__LPSPI3_SIN                                           0x0034 0x01e4 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO09__MEDIAMIX_CAM_DATA3                                   0x0034 0x01e4 0x049c 0x02 0x00
+#define MX91_PAD_GPIO_IO09__MEDIAMIX_DISP_DATA5                                  0x0034 0x01e4 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO09__TPM3_EXTCLK                                          0x0034 0x01e4 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO09__LPUART7_RX                                           0x0034 0x01e4 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO09__LPI2C7_SCL                                           0x0034 0x01e4 0x0410 0x06 0x01
+#define MX91_PAD_GPIO_IO09__FLEXIO1_FLEXIO9                                      0x0034 0x01e4 0x0390 0x07 0x00
+
+#define MX91_PAD_GPIO_IO10__GPIO2_IO10                                           0x0038 0x01e8 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO10__LPSPI3_SOUT                                          0x0038 0x01e8 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO10__MEDIAMIX_CAM_DATA4                                   0x0038 0x01e8 0x04a0 0x02 0x00
+#define MX91_PAD_GPIO_IO10__MEDIAMIX_DISP_DATA6                                  0x0038 0x01e8 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO10__TPM4_EXTCLK                                          0x0038 0x01e8 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO10__LPUART7_CTS_B                                        0x0038 0x01e8 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO10__LPI2C8_SDA                                           0x0038 0x01e8 0x041c 0x06 0x00
+#define MX91_PAD_GPIO_IO10__FLEXIO1_FLEXIO10                                     0x0038 0x01e8 0x0394 0x07 0x00
+
+#define MX91_PAD_GPIO_IO11__GPIO2_IO11                                           0x003c 0x01ec 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO11__LPSPI3_SCK                                           0x003c 0x01ec 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO11__MEDIAMIX_CAM_DATA5                                   0x003c 0x01ec 0x04a4 0x02 0x00
+#define MX91_PAD_GPIO_IO11__MEDIAMIX_DISP_DATA7                                  0x003c 0x01ec 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO11__TPM5_EXTCLK                                          0x003c 0x01ec 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO11__LPUART7_RTS_B                                        0x003c 0x01ec 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO11__LPI2C8_SCL                                           0x003c 0x01ec 0x0418 0x06 0x00
+#define MX91_PAD_GPIO_IO11__FLEXIO1_FLEXIO11                                     0x003c 0x01ec 0x0398 0x07 0x00
+
+#define MX91_PAD_GPIO_IO12__GPIO2_IO12                                           0x0040 0x01f0 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO12__TPM3_CH2                                             0x0040 0x01f0 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO12__PDM_BIT_STREAM2                                      0x0040 0x01f0 0x04cc 0x02 0x00
+#define MX91_PAD_GPIO_IO12__MEDIAMIX_DISP_DATA8                                  0x0040 0x01f0 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO12__LPSPI8_PCS0                                          0x0040 0x01f0 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO12__LPUART8_TX                                           0x0040 0x01f0 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO12__LPI2C8_SDA                                           0x0040 0x01f0 0x041c 0x06 0x01
+#define MX91_PAD_GPIO_IO12__SAI3_RX_SYNC                                         0x0040 0x01f0 0x04dc 0x07 0x00
+
+#define MX91_PAD_GPIO_IO13__GPIO2_IO13                                           0x0044 0x01f4 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO13__TPM4_CH2                                             0x0044 0x01f4 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO13__PDM_BIT_STREAM3                                      0x0044 0x01f4 0x04d0 0x02 0x00
+#define MX91_PAD_GPIO_IO13__MEDIAMIX_DISP_DATA9                                  0x0044 0x01f4 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO13__LPSPI8_SIN                                           0x0044 0x01f4 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO13__LPUART8_RX                                           0x0044 0x01f4 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO13__LPI2C8_SCL                                           0x0044 0x01f4 0x0418 0x06 0x01
+#define MX91_PAD_GPIO_IO13__FLEXIO1_FLEXIO13                                     0x0044 0x01f4 0x039c 0x07 0x00
+
+#define MX91_PAD_GPIO_IO14__GPIO2_IO14                                           0x0048 0x01f8 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO14__LPUART3_TX                                           0x0048 0x01f8 0x0474 0x01 0x00
+#define MX91_PAD_GPIO_IO14__MEDIAMIX_CAM_DATA6                                   0x0048 0x01f8 0x04a8 0x02 0x00
+#define MX91_PAD_GPIO_IO14__MEDIAMIX_DISP_DATA10                                 0x0048 0x01f8 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO14__LPSPI8_SOUT                                          0x0048 0x01f8 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO14__LPUART8_CTS_B                                        0x0048 0x01f8 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO14__LPUART4_TX                                           0x0048 0x01f8 0x0480 0x06 0x00
+#define MX91_PAD_GPIO_IO14__FLEXIO1_FLEXIO14                                     0x0048 0x01f8 0x03a0 0x07 0x00
+
+#define MX91_PAD_GPIO_IO15__GPIO2_IO15                                           0x004c 0x01fc 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO15__LPUART3_RX                                           0x004c 0x01fc 0x0470 0x01 0x00
+#define MX91_PAD_GPIO_IO15__MEDIAMIX_CAM_DATA7                                   0x004c 0x01fc 0x04ac 0x02 0x00
+#define MX91_PAD_GPIO_IO15__MEDIAMIX_DISP_DATA11                                 0x004c 0x01fc 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO15__LPSPI8_SCK                                           0x004c 0x01fc 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO15__LPUART8_RTS_B                                        0x004c 0x01fc 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO15__LPUART4_RX                                           0x004c 0x01fc 0x047c 0x06 0x00
+#define MX91_PAD_GPIO_IO15__FLEXIO1_FLEXIO15                                     0x004c 0x01fc 0x03a4 0x07 0x00
+
+#define MX91_PAD_GPIO_IO16__GPIO2_IO16                                           0x0050 0x0200 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO16__SAI3_TX_BCLK                                         0x0050 0x0200 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO16__PDM_BIT_STREAM2                                      0x0050 0x0200 0x04cc 0x02 0x01
+#define MX91_PAD_GPIO_IO16__MEDIAMIX_DISP_DATA12                                 0x0050 0x0200 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO16__LPUART3_CTS_B                                        0x0050 0x0200 0x046c 0x04 0x00
+#define MX91_PAD_GPIO_IO16__LPSPI4_PCS2                                          0x0050 0x0200 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO16__LPUART4_CTS_B                                        0x0050 0x0200 0x0478 0x06 0x00
+#define MX91_PAD_GPIO_IO16__FLEXIO1_FLEXIO16                                     0x0050 0x0200 0x03a8 0x07 0x00
+
+#define MX91_PAD_GPIO_IO17__GPIO2_IO17                                           0x0054 0x0204 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO17__SAI3_MCLK                                            0x0054 0x0204 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO17__MEDIAMIX_CAM_DATA8                                   0x0054 0x0204 0x04b0 0x02 0x00
+#define MX91_PAD_GPIO_IO17__MEDIAMIX_DISP_DATA13                                 0x0054 0x0204 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO17__LPUART3_RTS_B                                        0x0054 0x0204 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO17__LPSPI4_PCS1                                          0x0054 0x0204 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO17__LPUART4_RTS_B                                        0x0054 0x0204 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO17__FLEXIO1_FLEXIO17                                     0x0054 0x0204 0x03ac 0x07 0x00
+
+#define MX91_PAD_GPIO_IO18__GPIO2_IO18                                           0x0058 0x0208 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO18__SAI3_RX_BCLK                                         0x0058 0x0208 0x04d8 0x01 0x00
+#define MX91_PAD_GPIO_IO18__MEDIAMIX_CAM_DATA9                                   0x0058 0x0208 0x04b4 0x02 0x00
+#define MX91_PAD_GPIO_IO18__MEDIAMIX_DISP_DATA14                                 0x0058 0x0208 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO18__LPSPI5_PCS0                                          0x0058 0x0208 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO18__LPSPI4_PCS0                                          0x0058 0x0208 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO18__TPM5_CH2                                             0x0058 0x0208 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO18__FLEXIO1_FLEXIO18                                     0x0058 0x0208 0x03b0 0x07 0x00
+
+#define MX91_PAD_GPIO_IO19__GPIO2_IO19                                           0x005c 0x020c 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO19__SAI3_RX_SYNC                                         0x005c 0x020c 0x04dc 0x01 0x01
+#define MX91_PAD_GPIO_IO19__PDM_BIT_STREAM3                                      0x005c 0x020c 0x04d0 0x02 0x01
+#define MX91_PAD_GPIO_IO19__MEDIAMIX_DISP_DATA15                                 0x005c 0x020c 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO19__LPSPI5_SIN                                           0x005c 0x020c 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO19__LPSPI4_SIN                                           0x005c 0x020c 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO19__TPM6_CH2                                             0x005c 0x020c 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO19__SAI3_TX_DATA0                                        0x005c 0x020c 0x0000 0x07 0x00
+
+#define MX91_PAD_GPIO_IO20__GPIO2_IO20                                           0x0060 0x0210 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO20__SAI3_RX_DATA0                                        0x0060 0x0210 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO20__PDM_BIT_STREAM0                                      0x0060 0x0210 0x04c4 0x02 0x01
+#define MX91_PAD_GPIO_IO20__MEDIAMIX_DISP_DATA16                                 0x0060 0x0210 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO20__LPSPI5_SOUT                                          0x0060 0x0210 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO20__LPSPI4_SOUT                                          0x0060 0x0210 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO20__TPM3_CH1                                             0x0060 0x0210 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO20__FLEXIO1_FLEXIO20                                     0x0060 0x0210 0x03b4 0x07 0x00
+
+#define MX91_PAD_GPIO_IO21__GPIO2_IO21                                           0x0064 0x0214 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO21__SAI3_TX_DATA0                                        0x0064 0x0214 0x0000 0x01 0x00
+#define MX91_PAD_GPIO_IO21__PDM_CLK                                              0x0064 0x0214 0x0000 0x02 0x00
+#define MX91_PAD_GPIO_IO21__MEDIAMIX_DISP_DATA17                                 0x0064 0x0214 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO21__LPSPI5_SCK                                           0x0064 0x0214 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO21__LPSPI4_SCK                                           0x0064 0x0214 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO21__TPM4_CH1                                             0x0064 0x0214 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO21__SAI3_RX_BCLK                                         0x0064 0x0214 0x04d8 0x07 0x01
+
+#define MX91_PAD_GPIO_IO22__GPIO2_IO22                                           0x0068 0x0218 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO22__USDHC3_CLK                                           0x0068 0x0218 0x04e8 0x01 0x00
+#define MX91_PAD_GPIO_IO22__SPDIF_IN                                             0x0068 0x0218 0x04e4 0x02 0x00
+#define MX91_PAD_GPIO_IO22__MEDIAMIX_DISP_DATA18                                 0x0068 0x0218 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO22__TPM5_CH1                                             0x0068 0x0218 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO22__TPM6_EXTCLK                                          0x0068 0x0218 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO22__LPI2C5_SDA                                           0x0068 0x0218 0x0404 0x06 0x01
+#define MX91_PAD_GPIO_IO22__FLEXIO1_FLEXIO22                                     0x0068 0x0218 0x03b8 0x07 0x00
+
+#define MX91_PAD_GPIO_IO23__GPIO2_IO23                                           0x006c 0x021c 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO23__USDHC3_CMD                                           0x006c 0x021c 0x04ec 0x01 0x00
+#define MX91_PAD_GPIO_IO23__SPDIF_OUT                                            0x006c 0x021c 0x0000 0x02 0x00
+#define MX91_PAD_GPIO_IO23__MEDIAMIX_DISP_DATA19                                 0x006c 0x021c 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO23__TPM6_CH1                                             0x006c 0x021c 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO23__LPI2C5_SCL                                           0x006c 0x021c 0x0400 0x06 0x01
+#define MX91_PAD_GPIO_IO23__FLEXIO1_FLEXIO23                                     0x006c 0x021c 0x03bc 0x07 0x00
+
+#define MX91_PAD_GPIO_IO24__GPIO2_IO24                                           0x0070 0x0220 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO24__USDHC3_DATA0                                         0x0070 0x0220 0x04f0 0x01 0x00
+#define MX91_PAD_GPIO_IO24__MEDIAMIX_DISP_DATA20                                 0x0070 0x0220 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO24__TPM3_CH3                                             0x0070 0x0220 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO24__JTAG_MUX_TDO                                         0x0070 0x0220 0x0000 0x05 0x00
+#define MX91_PAD_GPIO_IO24__LPSPI6_PCS1                                          0x0070 0x0220 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO24__FLEXIO1_FLEXIO24                                     0x0070 0x0220 0x03c0 0x07 0x00
+
+#define MX91_PAD_GPIO_IO25__GPIO2_IO25                                           0x0074 0x0224 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO25__USDHC3_DATA1                                         0x0074 0x0224 0x04f4 0x01 0x00
+#define MX91_PAD_GPIO_IO25__CAN2_TX                                              0x0074 0x0224 0x0000 0x02 0x00
+#define MX91_PAD_GPIO_IO25__MEDIAMIX_DISP_DATA21                                 0x0074 0x0224 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO25__TPM4_CH3                                             0x0074 0x0224 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO25__JTAG_MUX_TCK                                         0x0074 0x0224 0x03d4 0x05 0x01
+#define MX91_PAD_GPIO_IO25__LPSPI7_PCS1                                          0x0074 0x0224 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO25__FLEXIO1_FLEXIO25                                     0x0074 0x0224 0x03c4 0x07 0x00
+
+#define MX91_PAD_GPIO_IO26__GPIO2_IO26                                           0x0078 0x0228 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO26__USDHC3_DATA2                                         0x0078 0x0228 0x04f8 0x01 0x00
+#define MX91_PAD_GPIO_IO26__PDM_BIT_STREAM1                                      0x0078 0x0228 0x04c8 0x02 0x01
+#define MX91_PAD_GPIO_IO26__MEDIAMIX_DISP_DATA22                                 0x0078 0x0228 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO26__TPM5_CH3                                             0x0078 0x0228 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO26__JTAG_MUX_TDI                                         0x0078 0x0228 0x03d8 0x05 0x01
+#define MX91_PAD_GPIO_IO26__LPSPI8_PCS1                                          0x0078 0x0228 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO26__SAI3_TX_SYNC                                         0x0078 0x0228 0x04e0 0x07 0x00
+
+#define MX91_PAD_GPIO_IO27__GPIO2_IO27                                           0x007c 0x022c 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO27__USDHC3_DATA3                                         0x007c 0x022c 0x04fc 0x01 0x00
+#define MX91_PAD_GPIO_IO27__CAN2_RX                                              0x007c 0x022c 0x0364 0x02 0x01
+#define MX91_PAD_GPIO_IO27__MEDIAMIX_DISP_DATA23                                 0x007c 0x022c 0x0000 0x03 0x00
+#define MX91_PAD_GPIO_IO27__TPM6_CH3                                             0x007c 0x022c 0x0000 0x04 0x00
+#define MX91_PAD_GPIO_IO27__JTAG_MUX_TMS                                         0x007c 0x022c 0x03dc 0x05 0x01
+#define MX91_PAD_GPIO_IO27__LPSPI5_PCS1                                          0x007c 0x022c 0x0000 0x06 0x00
+#define MX91_PAD_GPIO_IO27__FLEXIO1_FLEXIO27                                     0x007c 0x022c 0x03c8 0x07 0x00
+
+#define MX91_PAD_GPIO_IO28__GPIO2_IO28                                           0x0080 0x0230 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO28__LPI2C3_SDA                                           0x0080 0x0230 0x03f4 0x01 0x01
+#define MX91_PAD_GPIO_IO28__CAN1_TX                                              0x0080 0x0230 0x0000 0x02 0x00
+#define MX91_PAD_GPIO_IO28__FLEXIO1_FLEXIO28                                     0x0080 0x0230 0x0000 0x07 0x00
+
+#define MX91_PAD_GPIO_IO29__GPIO2_IO29                                           0x0084 0x0234 0x0000 0x00 0x00
+#define MX91_PAD_GPIO_IO29__LPI2C3_SCL                                           0x0084 0x0234 0x03f0 0x01 0x01
+#define MX91_PAD_GPIO_IO29__CAN1_RX                                              0x0084 0x0234 0x0360 0x02 0x00
+#define MX91_PAD_GPIO_IO29__FLEXIO1_FLEXIO29                                     0x0084 0x0234 0x0000 0x07 0x00
+
+#define MX91_PAD_CCM_CLKO1__CCMSRCGPCMIX_CLKO1                                   0x0088 0x0238 0x0000 0x00 0x00
+#define MX91_PAD_CCM_CLKO1__FLEXIO1_FLEXIO26                                     0x0088 0x0238 0x0000 0x04 0x00
+#define MX91_PAD_CCM_CLKO1__GPIO3_IO26                                           0x0088 0x0238 0x0000 0x05 0x00
+
+#define MX91_PAD_CCM_CLKO2__GPIO3_IO27                                           0x008c 0x023c 0x0000 0x05 0x00
+#define MX91_PAD_CCM_CLKO2__CCMSRCGPCMIX_CLKO2                                   0x008c 0x023c 0x0000 0x00 0x00
+#define MX91_PAD_CCM_CLKO2__FLEXIO1_FLEXIO27                                     0x008c 0x023c 0x03c8 0x04 0x01
+
+#define MX91_PAD_CCM_CLKO3__CCMSRCGPCMIX_CLKO3                                   0x0090 0x0240 0x0000 0x00 0x00
+#define MX91_PAD_CCM_CLKO3__FLEXIO2_FLEXIO28                                     0x0090 0x0240 0x0000 0x04 0x00
+#define MX91_PAD_CCM_CLKO3__GPIO4_IO28                                           0x0090 0x0240 0x0000 0x05 0x00
+
+#define MX91_PAD_CCM_CLKO4__CCMSRCGPCMIX_CLKO4                                   0x0094 0x0244 0x0000 0x00 0x00
+#define MX91_PAD_CCM_CLKO4__FLEXIO2_FLEXIO29                                     0x0094 0x0244 0x0000 0x04 0x00
+#define MX91_PAD_CCM_CLKO4__GPIO4_IO29                                           0x0094 0x0244 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET1_MDC__ENET1_MDC                                            0x0098 0x0248 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_MDC__LPUART3_DCB_B                                        0x0098 0x0248 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_MDC__I3C2_SCL                                             0x0098 0x0248 0x03cc 0x02 0x00
+#define MX91_PAD_ENET1_MDC__HSIOMIX_OTG_ID1                                      0x0098 0x0248 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_MDC__FLEXIO2_FLEXIO0                                      0x0098 0x0248 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_MDC__GPIO4_IO0                                            0x0098 0x0248 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_MDC__LPI2C1_SCL                                           0x0098 0x0248 0x03e0 0x06 0x00
+
+#define MX91_PAD_ENET1_MDIO__ENET_QOS_MDIO                                       0x009c 0x024c 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_MDIO__LPUART3_RIN_B                                       0x009c 0x024c 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_MDIO__I3C2_SDA                                            0x009c 0x024c 0x03d0 0x02 0x00
+#define MX91_PAD_ENET1_MDIO__HSIOMIX_OTG_PWR1                                    0x009c 0x024c 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_MDIO__FLEXIO2_FLEXIO1                                     0x009c 0x024c 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_MDIO__GPIO4_IO1                                           0x009c 0x024c 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_MDIO__LPI2C1_SDA                                          0x009c 0x024c 0x03e4 0x06 0x00
+
+#define MX91_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3                                   0x00a0 0x0250 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TD3__CAN2_TX                                              0x00a0 0x0250 0x0000 0x02 0x00
+#define MX91_PAD_ENET1_TD3__HSIOMIX_OTG_ID2                                      0x00a0 0x0250 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_TD3__FLEXIO2_FLEXIO2                                      0x00a0 0x0250 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TD3__GPIO4_IO2                                            0x00a0 0x0250 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_TD3__LPI2C2_SCL                                           0x00a0 0x0250 0x03e8 0x06 0x00
+
+#define MX91_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2                                   0x00a4 0x0254 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TD2__ENET_QOS_CLOCK_GENERATE_CLK                          0x00a4 0x0254 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_TD2__CAN2_RX                                              0x00a4 0x0254 0x0364 0x02 0x02
+#define MX91_PAD_ENET1_TD2__HSIOMIX_OTG_OC2                                      0x00a4 0x0254 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_TD2__FLEXIO2_FLEXIO3                                      0x00a4 0x0254 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TD2__GPIO4_IO3                                            0x00a4 0x0254 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_TD2__LPI2C2_SDA                                           0x00a4 0x0254 0x03ec 0x06 0x00
+
+#define MX91_PAD_ENET1_TD1__ENET1_RGMII_TD1                                      0x00a8 0x0258 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TD1__LPUART3_RTS_B                                        0x00a8 0x0258 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_TD1__I3C2_PUR                                             0x00a8 0x0258 0x0000 0x02 0x00
+#define MX91_PAD_ENET1_TD1__HSIOMIX_OTG_OC1                                      0x00a8 0x0258 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_TD1__FLEXIO2_FLEXIO4                                      0x00a8 0x0258 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TD1__GPIO4_IO4                                            0x00a8 0x0258 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_TD1__I3C2_PUR_B                                           0x00a8 0x0258 0x0000 0x06 0x00
+
+#define MX91_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0                                   0x00ac 0x025c 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TD0__LPUART3_TX                                           0x00ac 0x025c 0x0474 0x01 0x01
+#define MX91_PAD_ENET1_TD0__FLEXIO2_FLEXIO5                                      0x00ac 0x025c 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TD0__GPIO4_IO5                                            0x00ac 0x025c 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL                             0x00b0 0x0260 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TX_CTL__LPUART3_DTR_B                                     0x00b0 0x0260 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_TX_CTL__FLEXIO2_FLEXIO6                                   0x00b0 0x0260 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TX_CTL__GPIO4_IO6                                         0x00b0 0x0260 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_TX_CTL__LPSPI2_SCK                                        0x00b0 0x0260 0x043c 0x02 0x00
+
+#define MX91_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK                   0x00b4 0x0264 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_TXC__ENET_QOS_TX_ER                                       0x00b4 0x0264 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_TXC__FLEXIO2_FLEXIO7                                      0x00b4 0x0264 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_TXC__GPIO4_IO7                                            0x00b4 0x0264 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_TXC__LPSPI2_SIN                                           0x00b4 0x0264 0x0440 0x02 0x00
+
+#define MX91_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL                             0x00b8 0x0268 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RX_CTL__LPUART3_DSR_B                                     0x00b8 0x0268 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_RX_CTL__HSIOMIX_OTG_PWR2                                  0x00b8 0x0268 0x0000 0x03 0x00
+#define MX91_PAD_ENET1_RX_CTL__FLEXIO2_FLEXIO8                                   0x00b8 0x0268 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RX_CTL__GPIO4_IO8                                         0x00b8 0x0268 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_RX_CTL__LPSPI2_PCS0                                       0x00b8 0x0268 0x0434 0x02 0x00
+
+#define MX91_PAD_ENET1_RXC__ENET_QOS_RGMII_RXC                                   0x00bc 0x026c 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RXC__ENET_QOS_RX_ER                                       0x00bc 0x026c 0x0000 0x01 0x00
+#define MX91_PAD_ENET1_RXC__FLEXIO2_FLEXIO9                                      0x00bc 0x026c 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RXC__GPIO4_IO9                                            0x00bc 0x026c 0x0000 0x05 0x00
+#define MX91_PAD_ENET1_RXC__LPSPI2_SOUT                                          0x00bc 0x026c 0x0444 0x02 0x00
+
+#define MX91_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0                                   0x00c0 0x0270 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RD0__LPUART3_RX                                           0x00c0 0x0270 0x0470 0x01 0x01
+#define MX91_PAD_ENET1_RD0__FLEXIO2_FLEXIO10                                     0x00c0 0x0270 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RD0__GPIO4_IO10                                           0x00c0 0x0270 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1                                   0x00c4 0x0274 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RD1__LPUART3_CTS_B                                        0x00c4 0x0274 0x046c 0x01 0x01
+#define MX91_PAD_ENET1_RD1__LPTMR2_ALT1                                          0x00c4 0x0274 0x0448 0x03 0x00
+#define MX91_PAD_ENET1_RD1__FLEXIO2_FLEXIO11                                     0x00c4 0x0274 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RD1__GPIO4_IO11                                           0x00c4 0x0274 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2                                   0x00c8 0x0278 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RD2__LPTMR2_ALT2                                          0x00c8 0x0278 0x044c 0x03 0x00
+#define MX91_PAD_ENET1_RD2__FLEXIO2_FLEXIO12                                     0x00c8 0x0278 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RD2__GPIO4_IO12                                           0x00c8 0x0278 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3                                   0x00cc 0x027c 0x0000 0x00 0x00
+#define MX91_PAD_ENET1_RD3__FLEXSPI1_TESTER_TRIGGER                              0x00cc 0x027c 0x0000 0x02 0x00
+#define MX91_PAD_ENET1_RD3__LPTMR2_ALT3                                          0x00cc 0x027c 0x0450 0x03 0x00
+#define MX91_PAD_ENET1_RD3__FLEXIO2_FLEXIO13                                     0x00cc 0x027c 0x0000 0x04 0x00
+#define MX91_PAD_ENET1_RD3__GPIO4_IO13                                           0x00cc 0x027c 0x0000 0x05 0x00
+
+#define MX91_PAD_ENET2_MDC__ENET2_MDC                                            0x00d0 0x0280 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_MDC__LPUART4_DCB_B                                        0x00d0 0x0280 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_MDC__SAI2_RX_SYNC                                         0x00d0 0x0280 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_MDC__FLEXIO2_FLEXIO14                                     0x00d0 0x0280 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_MDC__GPIO4_IO14                                           0x00d0 0x0280 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_MDC__MEDIAMIX_CAM_CLK                                     0x00d0 0x0280 0x04bc 0x06 0x01
+
+#define MX91_PAD_ENET2_MDIO__ENET2_MDIO                                          0x00d4 0x0284 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_MDIO__LPUART4_RIN_B                                       0x00d4 0x0284 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_MDIO__SAI2_RX_BCLK                                        0x00d4 0x0284 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_MDIO__FLEXIO2_FLEXIO15                                    0x00d4 0x0284 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_MDIO__GPIO4_IO15                                          0x00d4 0x0284 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_MDIO__MEDIAMIX_CAM_DATA0                                  0x00d4 0x0284 0x0490 0x06 0x01
+
+#define MX91_PAD_ENET2_TD3__SAI2_RX_DATA0                                        0x00d8 0x0288 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_TD3__FLEXIO2_FLEXIO16                                     0x00d8 0x0288 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TD3__GPIO4_IO16                                           0x00d8 0x0288 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TD3__MEDIAMIX_CAM_VSYNC                                   0x00d8 0x0288 0x04c0 0x06 0x01
+#define MX91_PAD_ENET2_TD3__ENET2_RGMII_TD3                                      0x00d8 0x0288 0x0000 0x00 0x00
+
+#define MX91_PAD_ENET2_TD2__ENET2_RGMII_TD2                                      0x00dc 0x028c 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_TD2__ENET2_TX_CLK2                                        0x00dc 0x028c 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_TD2__FLEXIO2_FLEXIO17                                     0x00dc 0x028c 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TD2__GPIO4_IO17                                           0x00dc 0x028c 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TD2__MEDIAMIX_CAM_HSYNC                                   0x00dc 0x028c 0x04b8 0x06 0x01
+
+#define MX91_PAD_ENET2_TD1__ENET2_RGMII_TD1                                      0x00e0 0x0290 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_TD1__LPUART4_RTS_B                                        0x00e0 0x0290 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_TD1__FLEXIO2_FLEXIO18                                     0x00e0 0x0290 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TD1__GPIO4_IO18                                           0x00e0 0x0290 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TD1__MEDIAMIX_CAM_DATA1                                   0x00e0 0x0290 0x0494 0x06 0x01
+
+#define MX91_PAD_ENET2_TD0__ENET2_RGMII_TD0                                      0x00e4 0x0294 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_TD0__LPUART4_TX                                           0x00e4 0x0294 0x0480 0x01 0x01
+#define MX91_PAD_ENET2_TD0__FLEXIO2_FLEXIO19                                     0x00e4 0x0294 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TD0__GPIO4_IO19                                           0x00e4 0x0294 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TD0__MEDIAMIX_CAM_DATA2                                   0x00e4 0x0294 0x0498 0x06 0x01
+
+#define MX91_PAD_ENET2_TX_CTL__ENET2_RGMII_TX_CTL                                0x00e8 0x0298 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_TX_CTL__LPUART4_DTR_B                                     0x00e8 0x0298 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_TX_CTL__SAI2_TX_SYNC                                      0x00e8 0x0298 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_TX_CTL__FLEXIO2_FLEXIO20                                  0x00e8 0x0298 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TX_CTL__GPIO4_IO20                                        0x00e8 0x0298 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TX_CTL__MEDIAMIX_CAM_DATA3                                0x00e8 0x0298 0x049c 0x06 0x01
+
+#define MX91_PAD_ENET2_TXC__ENET2_RGMII_TXC                                      0x00ec 0x029c 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_TXC__ENET2_TX_ER                                          0x00ec 0x029c 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_TXC__SAI2_TX_BCLK                                         0x00ec 0x029c 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_TXC__FLEXIO2_FLEXIO21                                     0x00ec 0x029c 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_TXC__GPIO4_IO21                                           0x00ec 0x029c 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_TXC__MEDIAMIX_CAM_DATA4                                   0x00ec 0x029c 0x04a0 0x06 0x01
+
+#define MX91_PAD_ENET2_RX_CTL__ENET2_RGMII_RX_CTL                                0x00f0 0x02a0 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RX_CTL__LPUART4_DSR_B                                     0x00f0 0x02a0 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_RX_CTL__SAI2_TX_DATA0                                     0x00f0 0x02a0 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_RX_CTL__FLEXIO2_FLEXIO22                                  0x00f0 0x02a0 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RX_CTL__GPIO4_IO22                                        0x00f0 0x02a0 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_RX_CTL__MEDIAMIX_CAM_DATA5                                0x00f0 0x02a0 0x04a4 0x06 0x01
+
+#define MX91_PAD_ENET2_RXC__ENET2_RGMII_RXC                                      0x00f4 0x02a4 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RXC__ENET2_RX_ER                                          0x00f4 0x02a4 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_RXC__FLEXIO2_FLEXIO23                                     0x00f4 0x02a4 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RXC__GPIO4_IO23                                           0x00f4 0x02a4 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_RXC__MEDIAMIX_CAM_DATA6                                   0x00f4 0x02a4 0x04a8 0x06 0x01
+
+#define MX91_PAD_ENET2_RD0__ENET2_RGMII_RD0                                      0x00f8 0x02a8 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RD0__LPUART4_RX                                           0x00f8 0x02a8 0x047c 0x01 0x01
+#define MX91_PAD_ENET2_RD0__FLEXIO2_FLEXIO24                                     0x00f8 0x02a8 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RD0__GPIO4_IO24                                           0x00f8 0x02a8 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_RD0__MEDIAMIX_CAM_DATA7                                   0x00f8 0x02a8 0x04ac 0x06 0x01
+
+#define MX91_PAD_ENET2_RD1__ENET2_RGMII_RD1                                      0x00fc 0x02ac 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RD1__SPDIF_IN                                             0x00fc 0x02ac 0x04e4 0x01 0x01
+#define MX91_PAD_ENET2_RD1__FLEXIO2_FLEXIO25                                     0x00fc 0x02ac 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RD1__GPIO4_IO25                                           0x00fc 0x02ac 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_RD1__MEDIAMIX_CAM_DATA8                                   0x00fc 0x02ac 0x04b0 0x06 0x01
+
+#define MX91_PAD_ENET2_RD2__ENET2_RGMII_RD2                                      0x0100 0x02b0 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RD2__LPUART4_CTS_B                                        0x0100 0x02b0 0x0478 0x01 0x01
+#define MX91_PAD_ENET2_RD2__SAI2_MCLK                                            0x0100 0x02b0 0x0000 0x02 0x00
+#define MX91_PAD_ENET2_RD2__MQS2_RIGHT                                           0x0100 0x02b0 0x0000 0x03 0x00
+#define MX91_PAD_ENET2_RD2__FLEXIO2_FLEXIO26                                     0x0100 0x02b0 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RD2__GPIO4_IO26                                           0x0100 0x02b0 0x0000 0x05 0x00
+#define MX91_PAD_ENET2_RD2__MEDIAMIX_CAM_DATA9                                   0x0100 0x02b0 0x04b4 0x06 0x01
+
+#define MX91_PAD_ENET2_RD3__ENET2_RGMII_RD3                                      0x0104 0x02b4 0x0000 0x00 0x00
+#define MX91_PAD_ENET2_RD3__SPDIF_OUT                                            0x0104 0x02b4 0x0000 0x01 0x00
+#define MX91_PAD_ENET2_RD3__SPDIF_IN                                             0x0104 0x02b4 0x04e4 0x02 0x02
+#define MX91_PAD_ENET2_RD3__MQS2_LEFT                                            0x0104 0x02b4 0x0000 0x03 0x00
+#define MX91_PAD_ENET2_RD3__FLEXIO2_FLEXIO27                                     0x0104 0x02b4 0x0000 0x04 0x00
+#define MX91_PAD_ENET2_RD3__GPIO4_IO27                                           0x0104 0x02b4 0x0000 0x05 0x00
+
+#define MX91_PAD_SD1_CLK__FLEXIO1_FLEXIO8                                        0x0108 0x02b8 0x038c 0x04 0x01
+#define MX91_PAD_SD1_CLK__GPIO3_IO8                                              0x0108 0x02b8 0x0000 0x05 0x00
+#define MX91_PAD_SD1_CLK__USDHC1_CLK                                             0x0108 0x02b8 0x0000 0x00 0x00
+#define MX91_PAD_SD1_CLK__LPSPI2_SCK                                             0x0108 0x02b8 0x043c 0x03 0x01
+
+#define MX91_PAD_SD1_CMD__USDHC1_CMD                                             0x010c 0x02bc 0x0000 0x00 0x00
+#define MX91_PAD_SD1_CMD__FLEXIO1_FLEXIO9                                        0x010c 0x02bc 0x0390 0x04 0x01
+#define MX91_PAD_SD1_CMD__GPIO3_IO9                                              0x010c 0x02bc 0x0000 0x05 0x00
+#define MX91_PAD_SD1_CMD__LPSPI2_SIN                                             0x010c 0x02bc 0x0440 0x03 0x01
+
+#define MX91_PAD_SD1_DATA0__USDHC1_DATA0                                         0x0110 0x02c0 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA0__FLEXIO1_FLEXIO10                                     0x0110 0x02c0 0x0394 0x04 0x01
+#define MX91_PAD_SD1_DATA0__GPIO3_IO10                                           0x0110 0x02c0 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA0__LPSPI2_PCS0                                          0x0110 0x02c0 0x0434 0x03 0x01
+
+#define MX91_PAD_SD1_DATA1__USDHC1_DATA1                                         0x0114 0x02c4 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA1__FLEXIO1_FLEXIO11                                     0x0114 0x02c4 0x0398 0x04 0x01
+#define MX91_PAD_SD1_DATA1__GPIO3_IO11                                           0x0114 0x02c4 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA1__CCMSRCGPCMIX_INT_BOOT                                0x0114 0x02c4 0x0000 0x06 0x00
+#define MX91_PAD_SD1_DATA1__LPSPI2_SOUT                                          0x0114 0x02c4 0x0444 0x03 0x01
+
+#define MX91_PAD_SD1_DATA2__USDHC1_DATA2                                         0x0118 0x02c8 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA2__FLEXIO1_FLEXIO12                                     0x0118 0x02c8 0x0000 0x04 0x00
+#define MX91_PAD_SD1_DATA2__GPIO3_IO12                                           0x0118 0x02c8 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA2__CCMSRCGPCMIX_PMIC_READY                              0x0118 0x02c8 0x0000 0x06 0x00
+#define MX91_PAD_SD1_DATA2__LPSPI2_PCS1                                          0x0118 0x02c8 0x0438 0x03 0x00
+
+#define MX91_PAD_SD1_DATA3__USDHC1_DATA3                                         0x011c 0x02cc 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA3__FLEXSPI1_A_SS1_B                                     0x011c 0x02cc 0x0000 0x01 0x00
+#define MX91_PAD_SD1_DATA3__FLEXIO1_FLEXIO13                                     0x011c 0x02cc 0x039c 0x04 0x01
+#define MX91_PAD_SD1_DATA3__GPIO3_IO13                                           0x011c 0x02cc 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA3__LPSPI1_PCS1                                          0x011c 0x02cc 0x0424 0x03 0x00
+
+#define MX91_PAD_SD1_DATA4__USDHC1_DATA4                                         0x0120 0x02d0 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA4__FLEXSPI1_A_DATA4                                     0x0120 0x02d0 0x0000 0x01 0x00
+#define MX91_PAD_SD1_DATA4__FLEXIO1_FLEXIO14                                     0x0120 0x02d0 0x03a0 0x04 0x01
+#define MX91_PAD_SD1_DATA4__GPIO3_IO14                                           0x0120 0x02d0 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA4__LPSPI1_PCS0                                          0x0120 0x02d0 0x0420 0x03 0x00
+
+#define MX91_PAD_SD1_DATA5__USDHC1_DATA5                                         0x0124 0x02d4 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA5__FLEXSPI1_A_DATA5                                     0x0124 0x02d4 0x0000 0x01 0x00
+#define MX91_PAD_SD1_DATA5__USDHC1_RESET_B                                       0x0124 0x02d4 0x0000 0x02 0x00
+#define MX91_PAD_SD1_DATA5__FLEXIO1_FLEXIO15                                     0x0124 0x02d4 0x03a4 0x04 0x01
+#define MX91_PAD_SD1_DATA5__GPIO3_IO15                                           0x0124 0x02d4 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA5__LPSPI1_SIN                                           0x0124 0x02d4 0x042c 0x03 0x00
+
+#define MX91_PAD_SD1_DATA6__USDHC1_DATA6                                         0x0128 0x02d8 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA6__FLEXSPI1_A_DATA6                                     0x0128 0x02d8 0x0000 0x01 0x00
+#define MX91_PAD_SD1_DATA6__USDHC1_CD_B                                          0x0128 0x02d8 0x0000 0x02 0x00
+#define MX91_PAD_SD1_DATA6__FLEXIO1_FLEXIO16                                     0x0128 0x02d8 0x03a8 0x04 0x01
+#define MX91_PAD_SD1_DATA6__GPIO3_IO16                                           0x0128 0x02d8 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA6__LPSPI1_SCK                                           0x0128 0x02d8 0x0428 0x03 0x00
+
+#define MX91_PAD_SD1_DATA7__USDHC1_DATA7                                         0x012c 0x02dc 0x0000 0x00 0x00
+#define MX91_PAD_SD1_DATA7__FLEXSPI1_A_DATA7                                     0x012c 0x02dc 0x0000 0x01 0x00
+#define MX91_PAD_SD1_DATA7__USDHC1_WP                                            0x012c 0x02dc 0x0000 0x02 0x00
+#define MX91_PAD_SD1_DATA7__FLEXIO1_FLEXIO17                                     0x012c 0x02dc 0x03ac 0x04 0x01
+#define MX91_PAD_SD1_DATA7__GPIO3_IO17                                           0x012c 0x02dc 0x0000 0x05 0x00
+#define MX91_PAD_SD1_DATA7__LPSPI1_SOUT                                          0x012c 0x02dc 0x0430 0x03 0x00
+
+#define MX91_PAD_SD1_STROBE__USDHC1_STROBE                                       0x0130 0x02e0 0x0000 0x00 0x00
+#define MX91_PAD_SD1_STROBE__FLEXSPI1_A_DQS                                      0x0130 0x02e0 0x0000 0x01 0x00
+#define MX91_PAD_SD1_STROBE__FLEXIO1_FLEXIO18                                    0x0130 0x02e0 0x03b0 0x04 0x01
+#define MX91_PAD_SD1_STROBE__GPIO3_IO18                                          0x0130 0x02e0 0x0000 0x05 0x00
+
+#define MX91_PAD_SD2_VSELECT__USDHC2_VSELECT                                     0x0134 0x02e4 0x0000 0x00 0x00
+#define MX91_PAD_SD2_VSELECT__USDHC2_WP                                          0x0134 0x02e4 0x0000 0x01 0x00
+#define MX91_PAD_SD2_VSELECT__LPTMR2_ALT3                                        0x0134 0x02e4 0x0450 0x02 0x01
+#define MX91_PAD_SD2_VSELECT__FLEXIO1_FLEXIO19                                   0x0134 0x02e4 0x0000 0x04 0x00
+#define MX91_PAD_SD2_VSELECT__GPIO3_IO19                                         0x0134 0x02e4 0x0000 0x05 0x00
+#define MX91_PAD_SD2_VSELECT__CCMSRCGPCMIX_EXT_CLK1                              0x0134 0x02e4 0x0368 0x06 0x00
+
+#define MX91_PAD_SD3_CLK__USDHC3_CLK                                             0x0138 0x02e8 0x04e8 0x00 0x01
+#define MX91_PAD_SD3_CLK__FLEXSPI1_A_SCLK                                        0x0138 0x02e8 0x0000 0x01 0x00
+#define MX91_PAD_SD3_CLK__LPUART1_CTS_B                                          0x0138 0x02e8 0x0454 0x02 0x00
+#define MX91_PAD_SD3_CLK__FLEXIO1_FLEXIO20                                       0x0138 0x02e8 0x03b4 0x04 0x01
+#define MX91_PAD_SD3_CLK__GPIO3_IO20                                             0x0138 0x02e8 0x0000 0x05 0x00
+
+#define MX91_PAD_SD3_CMD__USDHC3_CMD                                             0x013c 0x02ec 0x04ec 0x00 0x01
+#define MX91_PAD_SD3_CMD__FLEXSPI1_A_SS0_B                                       0x013c 0x02ec 0x0000 0x01 0x00
+#define MX91_PAD_SD3_CMD__LPUART1_RTS_B                                          0x013c 0x02ec 0x0000 0x02 0x00
+#define MX91_PAD_SD3_CMD__FLEXIO1_FLEXIO21                                       0x013c 0x02ec 0x0000 0x04 0x00
+#define MX91_PAD_SD3_CMD__GPIO3_IO21                                             0x013c 0x02ec 0x0000 0x05 0x00
+
+#define MX91_PAD_SD3_DATA0__USDHC3_DATA0                                         0x0140 0x02f0 0x04f0 0x00 0x01
+#define MX91_PAD_SD3_DATA0__FLEXSPI1_A_DATA0                                     0x0140 0x02f0 0x0000 0x01 0x00
+#define MX91_PAD_SD3_DATA0__LPUART2_CTS_B                                        0x0140 0x02f0 0x0460 0x02 0x00
+#define MX91_PAD_SD3_DATA0__FLEXIO1_FLEXIO22                                     0x0140 0x02f0 0x03b8 0x04 0x01
+#define MX91_PAD_SD3_DATA0__GPIO3_IO22                                           0x0140 0x02f0 0x0000 0x05 0x00
+
+#define MX91_PAD_SD3_DATA1__USDHC3_DATA1                                         0x0144 0x02f4 0x04f4 0x00 0x01
+#define MX91_PAD_SD3_DATA1__FLEXSPI1_A_DATA1                                     0x0144 0x02f4 0x0000 0x01 0x00
+#define MX91_PAD_SD3_DATA1__LPUART2_RTS_B                                        0x0144 0x02f4 0x0000 0x02 0x00
+#define MX91_PAD_SD3_DATA1__FLEXIO1_FLEXIO23                                     0x0144 0x02f4 0x03bc 0x04 0x01
+#define MX91_PAD_SD3_DATA1__GPIO3_IO23                                           0x0144 0x02f4 0x0000 0x05 0x00
+
+#define MX91_PAD_SD3_DATA2__USDHC3_DATA2                                         0x0148 0x02f8 0x04f8 0x00 0x01
+#define MX91_PAD_SD3_DATA2__LPI2C4_SDA                                           0x0148 0x02f8 0x03fc 0x02 0x01
+#define MX91_PAD_SD3_DATA2__FLEXSPI1_A_DATA2                                     0x0148 0x02f8 0x0000 0x01 0x00
+#define MX91_PAD_SD3_DATA2__FLEXIO1_FLEXIO24                                     0x0148 0x02f8 0x03c0 0x04 0x01
+#define MX91_PAD_SD3_DATA2__GPIO3_IO24                                           0x0148 0x02f8 0x0000 0x05 0x00
+
+#define MX91_PAD_SD3_DATA3__USDHC3_DATA3                                         0x014c 0x02fc 0x04fc 0x00 0x01
+#define MX91_PAD_SD3_DATA3__FLEXSPI1_A_DATA3                                     0x014c 0x02fc 0x0000 0x01 0x00
+#define MX91_PAD_SD3_DATA3__LPI2C4_SCL                                           0x014c 0x02fc 0x03f8 0x02 0x01
+#define MX91_PAD_SD3_DATA3__FLEXIO1_FLEXIO25                                     0x014c 0x02fc 0x03c4 0x04 0x01
+#define MX91_PAD_SD3_DATA3__GPIO3_IO25                                           0x014c 0x02fc 0x0000 0x05 0x00
+
+#define MX91_PAD_SD2_CD_B__USDHC2_CD_B                                           0x0150 0x0300 0x0000 0x00 0x00
+#define MX91_PAD_SD2_CD_B__ENET_QOS_1588_EVENT0_IN                               0x0150 0x0300 0x0000 0x01 0x00
+#define MX91_PAD_SD2_CD_B__I3C2_SCL                                              0x0150 0x0300 0x03cc 0x02 0x01
+#define MX91_PAD_SD2_CD_B__FLEXIO1_FLEXIO0                                       0x0150 0x0300 0x036c 0x04 0x01
+#define MX91_PAD_SD2_CD_B__GPIO3_IO0                                             0x0150 0x0300 0x0000 0x05 0x00
+#define MX91_PAD_SD2_CD_B__LPI2C1_SCL                                            0x0150 0x0300 0x03e0 0x03 0x01
+
+#define MX91_PAD_SD2_CLK__USDHC2_CLK                                             0x0154 0x0304 0x0000 0x00 0x00
+#define MX91_PAD_SD2_CLK__ENET_QOS_1588_EVENT0_OUT                               0x0154 0x0304 0x0000 0x01 0x00
+#define MX91_PAD_SD2_CLK__I2C1_SDA                                               0x0154 0x0304 0x0000 0x03 0x00
+#define MX91_PAD_SD2_CLK__I3C2_SDA                                               0x0154 0x0304 0x03d0 0x02 0x01
+#define MX91_PAD_SD2_CLK__FLEXIO1_FLEXIO1                                        0x0154 0x0304 0x0370 0x04 0x01
+#define MX91_PAD_SD2_CLK__GPIO3_IO1                                              0x0154 0x0304 0x0000 0x05 0x00
+#define MX91_PAD_SD2_CLK__CCMSRCGPCMIX_OBSERVE0                                  0x0154 0x0304 0x0000 0x06 0x00
+#define MX91_PAD_SD2_CLK__LPI2C1_SDA                                             0x0154 0x0304 0x03e4 0x03 0x01
+
+#define MX91_PAD_SD2_CMD__USDHC2_CMD                                             0x0158 0x0308 0x0000 0x00 0x00
+#define MX91_PAD_SD2_CMD__ENET2_1588_EVENT0_IN                                   0x0158 0x0308 0x0000 0x01 0x00
+#define MX91_PAD_SD2_CMD__I3C2_PUR                                               0x0158 0x0308 0x0000 0x02 0x00
+#define MX91_PAD_SD2_CMD__I3C2_PUR_B                                             0x0158 0x0308 0x0000 0x03 0x00
+#define MX91_PAD_SD2_CMD__FLEXIO1_FLEXIO2                                        0x0158 0x0308 0x0374 0x04 0x01
+#define MX91_PAD_SD2_CMD__GPIO3_IO2                                              0x0158 0x0308 0x0000 0x05 0x00
+#define MX91_PAD_SD2_CMD__CCMSRCGPCMIX_OBSERVE1                                  0x0158 0x0308 0x0000 0x06 0x00
+
+#define MX91_PAD_SD2_DATA0__USDHC2_DATA0                                         0x015c 0x030c 0x0000 0x00 0x00
+#define MX91_PAD_SD2_DATA0__ENET2_1588_EVENT0_OUT                                0x015c 0x030c 0x0000 0x01 0x00
+#define MX91_PAD_SD2_DATA0__CAN2_TX                                              0x015c 0x030c 0x0000 0x02 0x00
+#define MX91_PAD_SD2_DATA0__FLEXIO1_FLEXIO3                                      0x015c 0x030c 0x0378 0x04 0x01
+#define MX91_PAD_SD2_DATA0__GPIO3_IO3                                            0x015c 0x030c 0x0000 0x05 0x00
+#define MX91_PAD_SD2_DATA0__LPUART1_TX                                           0x015c 0x030c 0x045c 0x03 0x00
+#define MX91_PAD_SD2_DATA0__CCMSRCGPCMIX_OBSERVE2                                0x015c 0x030c 0x0000 0x06 0x00
+
+#define MX91_PAD_SD2_DATA1__USDHC2_DATA1                                         0x0160 0x0310 0x0000 0x00 0x00
+#define MX91_PAD_SD2_DATA1__ENET2_1588_EVENT1_IN                                 0x0160 0x0310 0x0000 0x01 0x00
+#define MX91_PAD_SD2_DATA1__CAN2_RX                                              0x0160 0x0310 0x0364 0x02 0x03
+#define MX91_PAD_SD2_DATA1__FLEXIO1_FLEXIO4                                      0x0160 0x0310 0x037c 0x04 0x01
+#define MX91_PAD_SD2_DATA1__GPIO3_IO4                                            0x0160 0x0310 0x0000 0x05 0x00
+#define MX91_PAD_SD2_DATA1__LPUART1_RX                                           0x0160 0x0310 0x0458 0x03 0x00
+#define MX91_PAD_SD2_DATA1__CCMSRCGPCMIX_WAIT                                    0x0160 0x0310 0x0000 0x06 0x00
+
+#define MX91_PAD_SD2_DATA2__USDHC2_DATA2                                         0x0164 0x0314 0x0000 0x00 0x00
+#define MX91_PAD_SD2_DATA2__ENET2_1588_EVENT1_OUT                                0x0164 0x0314 0x0000 0x01 0x00
+#define MX91_PAD_SD2_DATA2__MQS2_RIGHT                                           0x0164 0x0314 0x0000 0x02 0x00
+#define MX91_PAD_SD2_DATA2__FLEXIO1_FLEXIO5                                      0x0164 0x0314 0x0380 0x04 0x01
+#define MX91_PAD_SD2_DATA2__GPIO3_IO5                                            0x0164 0x0314 0x0000 0x05 0x00
+#define MX91_PAD_SD2_DATA2__LPUART2_TX                                           0x0164 0x0314 0x0468 0x03 0x00
+#define MX91_PAD_SD2_DATA2__CCMSRCGPCMIX_STOP                                    0x0164 0x0314 0x0000 0x06 0x00
+
+#define MX91_PAD_SD2_DATA3__USDHC2_DATA3                                         0x0168 0x0318 0x0000 0x00 0x00
+#define MX91_PAD_SD2_DATA3__LPTMR2_ALT1                                          0x0168 0x0318 0x0448 0x01 0x01
+#define MX91_PAD_SD2_DATA3__MQS2_LEFT                                            0x0168 0x0318 0x0000 0x02 0x00
+#define MX91_PAD_SD2_DATA3__FLEXIO1_FLEXIO6                                      0x0168 0x0318 0x0384 0x04 0x01
+#define MX91_PAD_SD2_DATA3__GPIO3_IO6                                            0x0168 0x0318 0x0000 0x05 0x00
+#define MX91_PAD_SD2_DATA3__LPUART2_RX                                           0x0168 0x0318 0x0464 0x03 0x00
+#define MX91_PAD_SD2_DATA3__CCMSRCGPCMIX_EARLY_RESET                             0x0168 0x0318 0x0000 0x06 0x00
+
+#define MX91_PAD_SD2_RESET_B__USDHC2_RESET_B                                     0x016c 0x031c 0x0000 0x00 0x00
+#define MX91_PAD_SD2_RESET_B__LPTMR2_ALT2                                        0x016c 0x031c 0x044c 0x01 0x01
+#define MX91_PAD_SD2_RESET_B__FLEXIO1_FLEXIO7                                    0x016c 0x031c 0x0388 0x04 0x01
+#define MX91_PAD_SD2_RESET_B__GPIO3_IO7                                          0x016c 0x031c 0x0000 0x05 0x00
+#define MX91_PAD_SD2_RESET_B__CCMSRCGPCMIX_SYSTEM_RESET                          0x016c 0x031c 0x0000 0x06 0x00
+
+#define MX91_PAD_I2C1_SCL__LPI2C1_SCL                                            0x0170 0x0320 0x03e0 0x00 0x02
+#define MX91_PAD_I2C1_SCL__I3C1_SCL                                              0x0170 0x0320 0x0000 0x01 0x00
+#define MX91_PAD_I2C1_SCL__LPUART1_DCB_B                                         0x0170 0x0320 0x0000 0x02 0x00
+#define MX91_PAD_I2C1_SCL__TPM2_CH0                                              0x0170 0x0320 0x0000 0x03 0x00
+#define MX91_PAD_I2C1_SCL__GPIO1_IO0                                             0x0170 0x0320 0x0000 0x05 0x00
+
+#define MX91_PAD_I2C1_SDA__LPI2C1_SDA                                            0x0174 0x0324 0x03e4 0x00 0x02
+#define MX91_PAD_I2C1_SDA__I3C1_SDA                                              0x0174 0x0324 0x0000 0x01 0x00
+#define MX91_PAD_I2C1_SDA__LPUART1_RIN_B                                         0x0174 0x0324 0x0000 0x02 0x00
+#define MX91_PAD_I2C1_SDA__TPM2_CH1                                              0x0174 0x0324 0x0000 0x03 0x00
+#define MX91_PAD_I2C1_SDA__GPIO1_IO1                                             0x0174 0x0324 0x0000 0x05 0x00
+
+#define MX91_PAD_I2C2_SCL__LPI2C2_SCL                                            0x0178 0x0328 0x03e8 0x00 0x01
+#define MX91_PAD_I2C2_SCL__I3C1_PUR                                              0x0178 0x0328 0x0000 0x01 0x00
+#define MX91_PAD_I2C2_SCL__LPUART2_DCB_B                                         0x0178 0x0328 0x0000 0x02 0x00
+#define MX91_PAD_I2C2_SCL__TPM2_CH2                                              0x0178 0x0328 0x0000 0x03 0x00
+#define MX91_PAD_I2C2_SCL__SAI1_RX_SYNC                                          0x0178 0x0328 0x0000 0x04 0x00
+#define MX91_PAD_I2C2_SCL__GPIO1_IO2                                             0x0178 0x0328 0x0000 0x05 0x00
+#define MX91_PAD_I2C2_SCL__I3C1_PUR_B                                            0x0178 0x0328 0x0000 0x06 0x00
+
+#define MX91_PAD_I2C2_SDA__LPI2C2_SDA                                            0x017c 0x032c 0x03ec 0x00 0x01
+#define MX91_PAD_I2C2_SDA__LPUART2_RIN_B                                         0x017c 0x032c 0x0000 0x02 0x00
+#define MX91_PAD_I2C2_SDA__TPM2_CH3                                              0x017c 0x032c 0x0000 0x03 0x00
+#define MX91_PAD_I2C2_SDA__SAI1_RX_BCLK                                          0x017c 0x032c 0x0000 0x04 0x00
+#define MX91_PAD_I2C2_SDA__GPIO1_IO3                                             0x017c 0x032c 0x0000 0x05 0x00
+
+#define MX91_PAD_UART1_RXD__LPUART1_RX                                           0x0180 0x0330 0x0458 0x00 0x01
+#define MX91_PAD_UART1_RXD__ELE_UART_RX                                          0x0180 0x0330 0x0000 0x01 0x00
+#define MX91_PAD_UART1_RXD__LPSPI2_SIN                                           0x0180 0x0330 0x0440 0x02 0x02
+#define MX91_PAD_UART1_RXD__TPM1_CH0                                             0x0180 0x0330 0x0000 0x03 0x00
+#define MX91_PAD_UART1_RXD__GPIO1_IO4                                            0x0180 0x0330 0x0000 0x05 0x00
+
+#define MX91_PAD_UART1_TXD__LPUART1_TX                                           0x0184 0x0334 0x045c 0x00 0x01
+#define MX91_PAD_UART1_TXD__ELE_UART_TX                                          0x0184 0x0334 0x0000 0x01 0x00
+#define MX91_PAD_UART1_TXD__LPSPI2_PCS0                                          0x0184 0x0334 0x0434 0x02 0x02
+#define MX91_PAD_UART1_TXD__TPM1_CH1                                             0x0184 0x0334 0x0000 0x03 0x00
+#define MX91_PAD_UART1_TXD__GPIO1_IO5                                            0x0184 0x0334 0x0000 0x05 0x00
+
+#define MX91_PAD_UART2_RXD__LPUART2_RX                                           0x0188 0x0338 0x0464 0x00 0x01
+#define MX91_PAD_UART2_RXD__LPUART1_CTS_B                                        0x0188 0x0338 0x0454 0x01 0x01
+#define MX91_PAD_UART2_RXD__LPSPI2_SOUT                                          0x0188 0x0338 0x0444 0x02 0x02
+#define MX91_PAD_UART2_RXD__TPM1_CH2                                             0x0188 0x0338 0x0000 0x03 0x00
+#define MX91_PAD_UART2_RXD__SAI1_MCLK                                            0x0188 0x0338 0x04d4 0x04 0x00
+#define MX91_PAD_UART2_RXD__GPIO1_IO6                                            0x0188 0x0338 0x0000 0x05 0x00
+
+#define MX91_PAD_UART2_TXD__LPUART2_TX                                           0x018c 0x033c 0x0468 0x00 0x01
+#define MX91_PAD_UART2_TXD__LPUART1_RTS_B                                        0x018c 0x033c 0x0000 0x01 0x00
+#define MX91_PAD_UART2_TXD__LPSPI2_SCK                                           0x018c 0x033c 0x043c 0x02 0x02
+#define MX91_PAD_UART2_TXD__TPM1_CH3                                             0x018c 0x033c 0x0000 0x03 0x00
+#define MX91_PAD_UART2_TXD__GPIO1_IO7                                            0x018c 0x033c 0x0000 0x05 0x00
+#define MX91_PAD_UART2_TXD__SAI3_TX_SYNC                                         0x018c 0x033c 0x04e0 0x07 0x02
+
+#define MX91_PAD_PDM_CLK__PDM_CLK                                                0x0190 0x0340 0x0000 0x00 0x00
+#define MX91_PAD_PDM_CLK__MQS1_LEFT                                              0x0190 0x0340 0x0000 0x01 0x00
+#define MX91_PAD_PDM_CLK__LPTMR1_ALT1                                            0x0190 0x0340 0x0000 0x04 0x00
+#define MX91_PAD_PDM_CLK__GPIO1_IO8                                              0x0190 0x0340 0x0000 0x05 0x00
+#define MX91_PAD_PDM_CLK__CAN1_TX                                                0x0190 0x0340 0x0000 0x06 0x00
+
+#define MX91_PAD_PDM_BIT_STREAM0__PDM_BIT_STREAM0                                0x0194 0x0344 0x04c4 0x00 0x02
+#define MX91_PAD_PDM_BIT_STREAM0__MQS1_RIGHT                                     0x0194 0x0344 0x0000 0x01 0x00
+#define MX91_PAD_PDM_BIT_STREAM0__LPSPI1_PCS1                                    0x0194 0x0344 0x0424 0x02 0x01
+#define MX91_PAD_PDM_BIT_STREAM0__TPM1_EXTCLK                                    0x0194 0x0344 0x0000 0x03 0x00
+#define MX91_PAD_PDM_BIT_STREAM0__LPTMR1_ALT2                                    0x0194 0x0344 0x0000 0x04 0x00
+#define MX91_PAD_PDM_BIT_STREAM0__GPIO1_IO9                                      0x0194 0x0344 0x0000 0x05 0x00
+#define MX91_PAD_PDM_BIT_STREAM0__CAN1_RX                                        0x0194 0x0344 0x0360 0x06 0x01
+
+#define MX91_PAD_PDM_BIT_STREAM1__PDM_BIT_STREAM1                                0x0198 0x0348 0x04c8 0x00 0x02
+#define MX91_PAD_PDM_BIT_STREAM1__LPSPI2_PCS1                                    0x0198 0x0348 0x0438 0x02 0x01
+#define MX91_PAD_PDM_BIT_STREAM1__TPM2_EXTCLK                                    0x0198 0x0348 0x0000 0x03 0x00
+#define MX91_PAD_PDM_BIT_STREAM1__LPTMR1_ALT3                                    0x0198 0x0348 0x0000 0x04 0x00
+#define MX91_PAD_PDM_BIT_STREAM1__GPIO1_IO10                                     0x0198 0x0348 0x0000 0x05 0x00
+#define MX91_PAD_PDM_BIT_STREAM1__CCMSRCGPCMIX_EXT_CLK1                          0x0198 0x0348 0x0368 0x06 0x01
+
+#define MX91_PAD_SAI1_TXFS__SAI1_TX_SYNC                                         0x019c 0x034c 0x0000 0x00 0x00
+#define MX91_PAD_SAI1_TXFS__SAI1_TX_DATA1                                        0x019c 0x034c 0x0000 0x01 0x00
+#define MX91_PAD_SAI1_TXFS__LPSPI1_PCS0                                          0x019c 0x034c 0x0420 0x02 0x01
+#define MX91_PAD_SAI1_TXFS__LPUART2_DTR_B                                        0x019c 0x034c 0x0000 0x03 0x00
+#define MX91_PAD_SAI1_TXFS__MQS1_LEFT                                            0x019c 0x034c 0x0000 0x04 0x00
+#define MX91_PAD_SAI1_TXFS__GPIO1_IO11                                           0x019c 0x034c 0x0000 0x05 0x00
+
+#define MX91_PAD_SAI1_TXC__SAI1_TX_BCLK                                          0x01a0 0x0350 0x0000 0x00 0x00
+#define MX91_PAD_SAI1_TXC__LPUART2_CTS_B                                         0x01a0 0x0350 0x0460 0x01 0x01
+#define MX91_PAD_SAI1_TXC__LPSPI1_SIN                                            0x01a0 0x0350 0x042c 0x02 0x01
+#define MX91_PAD_SAI1_TXC__LPUART1_DSR_B                                         0x01a0 0x0350 0x0000 0x03 0x00
+#define MX91_PAD_SAI1_TXC__CAN1_RX                                               0x01a0 0x0350 0x0360 0x04 0x02
+#define MX91_PAD_SAI1_TXC__GPIO1_IO12                                            0x01a0 0x0350 0x0000 0x05 0x00
+
+#define MX91_PAD_SAI1_TXD0__SAI1_TX_DATA0                                        0x01a4 0x0354 0x0000 0x00 0x00
+#define MX91_PAD_SAI1_TXD0__LPUART2_RTS_B                                        0x01a4 0x0354 0x0000 0x01 0x00
+#define MX91_PAD_SAI1_TXD0__LPSPI1_SCK                                           0x01a4 0x0354 0x0428 0x02 0x01
+#define MX91_PAD_SAI1_TXD0__LPUART1_DTR_B                                        0x01a4 0x0354 0x0000 0x03 0x00
+#define MX91_PAD_SAI1_TXD0__CAN1_TX                                              0x01a4 0x0354 0x0000 0x04 0x00
+#define MX91_PAD_SAI1_TXD0__GPIO1_IO13                                           0x01a4 0x0354 0x0000 0x05 0x00
+#define MX91_PAD_SAI1_TXD0__SAI1_MCLK                                            0x01a4 0x0354 0x04d4 0x06 0x01
+
+#define MX91_PAD_SAI1_RXD0__SAI1_RX_DATA0                                        0x01a8 0x0358 0x0000 0x00 0x00
+#define MX91_PAD_SAI1_RXD0__SAI1_MCLK                                            0x01a8 0x0358 0x04d4 0x01 0x02
+#define MX91_PAD_SAI1_RXD0__LPSPI1_SOUT                                          0x01a8 0x0358 0x0430 0x02 0x01
+#define MX91_PAD_SAI1_RXD0__LPUART2_DSR_B                                        0x01a8 0x0358 0x0000 0x03 0x00
+#define MX91_PAD_SAI1_RXD0__MQS1_RIGHT                                           0x01a8 0x0358 0x0000 0x04 0x00
+#define MX91_PAD_SAI1_RXD0__GPIO1_IO14                                           0x01a8 0x0358 0x0000 0x05 0x00
+
+#define MX91_PAD_WDOG_ANY__WDOG1_WDOG_ANY                                        0x01ac 0x035c 0x0000 0x00 0x00
+#define MX91_PAD_WDOG_ANY__GPIO1_IO15                                            0x01ac 0x035c 0x0000 0x05 0x00
+#endif /* __DTS_IMX91_PINFUNC_H */
diff --git a/arch/arm64/boot/dts/freescale/imx91-tqma9131-mba91xxca.dts b/arch/arm64/boot/dts/freescale/imx91-tqma9131-mba91xxca.dts
new file mode 100644
index 000000000000..5c430e6fca65
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx91-tqma9131-mba91xxca.dts
@@ -0,0 +1,739 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Markus Niebel
+ * Author: Alexander Stein
+ */
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/pwm/pwm.h>
+#include <dt-bindings/usb/pd.h>
+#include "imx91-tqma9131.dtsi"
+
+/{
+	model = "TQ-Systems i.MX91 TQMa91xxLA/TQMa91xxCA on MBa91xxCA starter kit";
+	compatible = "tq,imx91-tqma9131-mba91xxca", "tq,imx91-tqma9131", "fsl,imx91";
+	chassis-type = "embedded";
+
+	chosen {
+		stdout-path = &lpuart1;
+	};
+
+	aliases {
+		eeprom0 = &eeprom0;
+		ethernet0 = &eqos;
+		ethernet1 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		rtc0 = &pcf85063;
+		rtc1 = &bbnsm_rtc;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&tpm2 2 5000000 0>;
+		brightness-levels = <0 4 8 16 32 64 128 255>;
+		default-brightness-level = <7>;
+		power-supply = <&reg_12v0>;
+		enable-gpios = <&expander2 2 GPIO_ACTIVE_HIGH>;
+		status = "disabled";
+	};
+
+	display: display {
+		/*
+		 * Display is not fixed, so compatible has to be added from
+		 * DT overlay
+		 */
+		power-supply = <&reg_3v3>;
+		enable-gpios = <&expander2 1 GPIO_ACTIVE_HIGH>;
+		backlight = <&backlight>;
+		status = "disabled";
+
+		port {
+			panel_in: endpoint {
+			};
+		};
+	};
+
+	fan0: gpio-fan {
+		compatible = "gpio-fan";
+		gpios = <&expander2 4 GPIO_ACTIVE_HIGH>;
+		gpio-fan,speed-map = <0 0>, <10000 1>;
+		fan-supply = <&reg_12v0>;
+		#cooling-cells = <2>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		switch-a {
+			label = "switcha";
+			linux,code = <BTN_0>;
+			gpios = <&expander0 6 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+
+		switch-b {
+			label = "switchb";
+			linux,code = <BTN_1>;
+			gpios = <&expander0 7 GPIO_ACTIVE_LOW>;
+			wakeup-source;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&expander2 6 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&expander2 7 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>;
+	};
+
+	lvds_encoder: lvds-encoder {
+		compatible = "ti,sn75lvds83", "lvds-encoder";
+		powerdown-gpios = <&expander2 3 GPIO_ACTIVE_LOW>;
+		power-supply = <&reg_3v3>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lvds_encoder_input: endpoint {
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				lvds_encoder_output: endpoint {
+				};
+			};
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_MB";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	reg_5v0: regulator-5v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_5V0_MB";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	reg_12v0: regulator-12v0 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&expander1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_mpcie_1v5: regulator-mpcie-1v5 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_1V5_MPCIE";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		gpio = <&expander0 2 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+
+	reg_mpcie_3v3: regulator-mpcie-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "V_3V3_MPCIE";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&expander0 3 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+};
+
+&adc1 {
+	status = "okay";
+};
+
+&eqos {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_eqos>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy_eqos>;
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy_eqos: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_eqos_phy>;
+			reset-gpios = <&expander1 0 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+			enet-phy-lane-no-swap;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&ethphy_fec>;
+	fsl,magic-packet;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <5000000>;
+
+		ethphy_fec: ethernet-phy@0 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <0>;
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_fec_phy>;
+			reset-gpios = <&expander1 1 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <500000>;
+			reset-deassert-us = <50000>;
+			interrupt-parent = <&gpio3>;
+			interrupts = <27 IRQ_TYPE_LEVEL_LOW>;
+			enet-phy-lane-no-swap;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+		};
+	};
+};
+
+&flexcan1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	xceiver-supply = <&reg_3v3>;
+	status = "okay";
+};
+
+&gpio1 {
+	gpio-line-names =
+		/* 00 */ "", "", "", "PMIC_IRQ#",
+		/* 04 */ "", "", "", "",
+		/* 08 */ "", "", "USB_C_ALERT#", "BM2_LCD_INT#",
+		/* 12 */ "PEX_INT#", "", "RTC_EVENT#", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "", "",
+		/* 28 */ "", "", "", "";
+};
+
+&gpio2 {
+	gpio-line-names =
+		/* 00 */ "", "", "", "",
+		/* 04 */ "", "", "", "",
+		/* 08 */ "", "", "", "",
+		/* 12 */ "", "", "", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "", "",
+		/* 28 */ "", "", "", "";
+};
+
+&gpio3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_jtag>;
+	gpio-line-names =
+		/* 00 */ "SD2_CD#", "", "", "",
+		/* 04 */ "", "", "", "SD2_RST#",
+		/* 08 */ "", "", "", "",
+		/* 12 */ "", "", "", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "ENET1_INT#", "ENET2_INT#",
+		/* 28 */ "", "", "", "";
+};
+
+&gpio4 {
+	gpio-line-names =
+		/* 00 */ "", "", "", "",
+		/* 04 */ "", "", "", "",
+		/* 08 */ "", "", "", "",
+		/* 12 */ "", "", "", "",
+		/* 16 */ "", "", "", "",
+		/* 20 */ "", "", "", "",
+		/* 24 */ "", "", "", "",
+		/* 28 */ "", "", "", "";
+};
+
+&lpi2c3 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c3>;
+	pinctrl-1 = <&pinctrl_lpi2c3>;
+	status = "okay";
+
+	temperature-sensor@1c {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1c>;
+	};
+
+	ptn5110: usb-typec@50 {
+		compatible = "nxp,ptn5110", "tcpci";
+		reg = <0x50>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_typec>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <10 IRQ_TYPE_EDGE_FALLING>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "X17";
+			power-role = "dual";
+			data-role = "dual";
+			try-power-role = "sink";
+			typec-power-opmode = "default";
+			pd-disable;
+			self-powered;
+
+			port {
+				typec_con_hs: endpoint {
+					remote-endpoint = <&typec_hs>;
+				};
+			};
+		};
+	};
+
+	eeprom2: eeprom@54 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x54>;
+		pagesize = <16>;
+		vcc-supply = <&reg_3v3>;
+	};
+
+	expander0: gpio@70 {
+		compatible = "nxp,pca9538";
+		reg = <0x70>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pexp_irq>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <12 IRQ_TYPE_LEVEL_LOW>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "TEMP_EVENT_MOD#", "MPCIE_WAKE#",
+				  "MPCIE_1V5_EN", "MPCIE_3V3_EN",
+				  "MPCIE_PERST#", "MPCIE_WDISABLE#",
+				  "BUTTON_A#", "BUTTON_B#";
+
+		temp-event-mod-hog {
+			gpio-hog;
+			gpios = <0 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "TEMP_EVENT_MOD#";
+		};
+
+		mpcie-wake-hog {
+			gpio-hog;
+			gpios = <1 GPIO_ACTIVE_LOW>;
+			input;
+			line-name = "MPCIE_WAKE#";
+		};
+
+		/*
+		 * Controls the mPCIE slot reset which is low active as
+		 * reset signal. The output-low states, the signal is
+		 * inactive, e.g. not in reset
+		 */
+		mpcie_rst_hog: mpcie-rst-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "MPCIE_PERST#";
+		};
+
+		/*
+		 * Controls the mPCIE slot WDISABLE pin which is low active
+		 * as disable signal. The output-low states, the signal is
+		 * inactive, e.g. not disabled
+		 */
+		mpcie_wdisable_hog: mpcie-wdisable-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "MPCIE_WDISABLE#";
+		};
+	};
+
+	expander1: gpio@71 {
+		compatible = "nxp,pca9538";
+		reg = <0x71>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "ENET1_RESET#", "ENET2_RESET#",
+				  "USB_RESET#", "",
+				  "WLAN_PD#", "WLAN_W_DISABLE#",
+				  "WLAN_PERST#", "12V_EN";
+
+		/*
+		 * Controls the WiFi card PD pin which is low active
+		 * as power down signal. The output-low states, the signal
+		 * is inactive, e.g. not power down
+		 */
+		wlan-pd-hog {
+			gpio-hog;
+			gpios = <4 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "WLAN_PD#";
+		};
+
+		/*
+		 * Controls the WiFi card disable pin which is low active
+		 * as disable signal. The output-low states, the signal
+		 * is inactive, e.g. not disabled
+		 */
+		wlan-wdisable-hog {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "WLAN_W_DISABLE#";
+		};
+
+		/*
+		 * Controls the WiFi card reset pin which is low active
+		 * as reset signal. The output-low states, the signal
+		 * is inactive, e.g. not in reset
+		 */
+		wlan-perst-hog {
+			gpio-hog;
+			gpios = <6 GPIO_ACTIVE_LOW>;
+			output-low;
+			line-name = "WLAN_PERST#";
+		};
+	};
+
+	expander2: gpio@72 {
+		compatible = "nxp,pca9538";
+		reg = <0x72>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		vcc-supply = <&reg_3v3>;
+		gpio-line-names = "LCD_RESET#", "LCD_PWR_EN",
+				  "LCD_BLT_EN", "LVDS_SHDN#",
+				  "FAN_PWR_EN", "",
+				  "USER_LED1", "USER_LED2";
+	};
+};
+
+&lpuart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&lpuart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	linux,rs485-enabled-at-boot-time;
+	status = "okay";
+};
+
+&pcf85063 {
+	/* RTC_EVENT# from SoM is connected on mainboard */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pcf85063>;
+	interrupt-parent = <&gpio1>;
+	interrupts = <14 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&se97_som {
+	/* TEMP_EVENT# from SoM is connected on mainboard */
+	interrupt-parent = <&expander0>;
+	interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+};
+
+&tpm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_tpm2>;
+	status = "okay";
+};
+
+&usbotg1 {
+	dr_mode = "otg";
+	hnp-disable;
+	srp-disable;
+	adp-disable;
+	usb-role-switch;
+	disable-over-current;
+	status = "okay";
+
+	port {
+		typec_hs: endpoint {
+			remote-endpoint = <&typec_con_hs>;
+		};
+	};
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	disable-over-current;
+	status = "okay";
+
+	hub_2_0: hub@1 {
+		compatible = "usb424,2517";
+		reg = <1>;
+		reset-gpios = <&expander1 2 GPIO_ACTIVE_LOW>;
+		vdd-supply = <&reg_3v3>;
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc2_hs>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-1 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+	pinctrl-2 = <&pinctrl_usdhc2_uhs>, <&pinctrl_usdhc2_gpio>;
+	cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_usdhc2_vmmc>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+	disable-wp;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_eqos: eqosgrp {
+		fsl,pins = /* PD | FSEL_2 | DSE X4 */
+			   <MX91_PAD_ENET1_MDC__ENET1_MDC				0x51e>,
+			   /* SION | HYS | FSEL_2 | DSE X4 */
+			   <MX91_PAD_ENET1_MDIO__ENET_QOS_MDIO				0x4000111e>,
+			   /* HYS | FSEL_0 | DSE no drive */
+			   <MX91_PAD_ENET1_RD0__ENET_QOS_RGMII_RD0			0x1000>,
+			   <MX91_PAD_ENET1_RD1__ENET_QOS_RGMII_RD1			0x1000>,
+			   <MX91_PAD_ENET1_RD2__ENET_QOS_RGMII_RD2			0x1000>,
+			   <MX91_PAD_ENET1_RD3__ENET_QOS_RGMII_RD3			0x1000>,
+			   <MX91_PAD_ENET1_RX_CTL__ENET_QOS_RGMII_RX_CTL		0x1000>,
+			   /* HYS | PD | FSEL_0 | DSE no drive */
+			   <MX91_PAD_ENET1_RXC__ENET_QOS_RGMII_RXC			0x1400>,
+			   /* PD | FSEL_2 | DSE X4 */
+			   <MX91_PAD_ENET1_TD0__ENET_QOS_RGMII_TD0			0x51e>,
+			   <MX91_PAD_ENET1_TD1__ENET1_RGMII_TD1				0x51e>,
+			   <MX91_PAD_ENET1_TD2__ENET_QOS_RGMII_TD2			0x51e>,
+			   <MX91_PAD_ENET1_TD3__ENET_QOS_RGMII_TD3			0x51e>,
+			   <MX91_PAD_ENET1_TX_CTL__ENET_QOS_RGMII_TX_CTL		0x51e>,
+			   /* PD | FSEL_3 | DSE X3 */
+			   <MX91_PAD_ENET1_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK	0x58e>;
+	};
+
+	pinctrl_eqos_phy: eqosphygrp {
+		fsl,pins = /* HYS | FSEL_0 | DSE no drive */
+			   <MX91_PAD_CCM_CLKO1__GPIO3_IO26		0x1000>;
+	};
+
+	pinctrl_fec: fecgrp {
+		fsl,pins = /* PD | FSEL_2 | DSE X4 */
+			   <MX91_PAD_ENET2_MDC__ENET2_MDC		0x51e>,
+			   /* SION | HYS | FSEL_2 | DSE X4 */
+			   <MX91_PAD_ENET2_MDIO__ENET2_MDIO		0x4000111e>,
+			   /* HYS | FSEL_0 | DSE no drive */
+			   <MX91_PAD_ENET2_RD0__ENET2_RGMII_RD0		0x1000>,
+			   <MX91_PAD_ENET2_RD1__ENET2_RGMII_RD1		0x1000>,
+			   <MX91_PAD_ENET2_RD2__ENET2_RGMII_RD2		0x1000>,
+			   <MX91_PAD_ENET2_RD3__ENET2_RGMII_RD3		0x1000>,
+			   <MX91_PAD_ENET2_RX_CTL__ENET2_RGMII_RX_CTL	0x1000>,
+			   /* HYS | PD | FSEL_0 | DSE no drive */
+			   <MX91_PAD_ENET2_RXC__ENET2_RGMII_RXC		0x1400>,
+			   /* PD | FSEL_2 | DSE X4 */
+			   <MX91_PAD_ENET2_TD0__ENET2_RGMII_TD0		0x51e>,
+			   <MX91_PAD_ENET2_TD1__ENET2_RGMII_TD1		0x51e>,
+			   <MX91_PAD_ENET2_TD2__ENET2_RGMII_TD2		0x51e>,
+			   <MX91_PAD_ENET2_TD3__ENET2_RGMII_TD3		0x51e>,
+			   <MX91_PAD_ENET2_TX_CTL__ENET2_RGMII_TX_CTL	0x51e>,
+			   /* PD | FSEL_3 | DSE X3 */
+			   <MX91_PAD_ENET2_TXC__ENET2_RGMII_TXC		0x58e>;
+	};
+
+	pinctrl_fec_phy: fecphygrp {
+		fsl,pins = /* HYS | FSEL_0 | DSE no drive */
+			   <MX91_PAD_CCM_CLKO2__GPIO3_IO27		0x1000>;
+	};
+
+	pinctrl_flexcan1: flexcan1grp {
+		fsl,pins = /* HYS | PU | FSEL_0 | DSE no drive */
+			   <MX91_PAD_PDM_BIT_STREAM0__CAN1_RX		0x1200>,
+			   /* PU | FSEL_3 | DSE X4 */
+			   <MX91_PAD_PDM_CLK__CAN1_TX			0x039e>;
+	};
+
+	pinctrl_jtag: jtaggrp {
+		fsl,pins = <MX91_PAD_DAP_TCLK_SWCLK__JTAG_MUX_TCK	0x051e>,
+			   <MX91_PAD_DAP_TDI__JTAG_MUX_TDI		0x1200>,
+			   <MX91_PAD_DAP_TDO_TRACESWO__JTAG_MUX_TDO	0x031e>,
+			   <MX91_PAD_DAP_TMS_SWDIO__JTAG_MUX_TMS	0x1200>;
+	};
+
+	pinctrl_lpi2c3: lpi2c3grp {
+		fsl,pins = /* SION | HYS | OD | FSEL_3 | DSE X4 */
+			   <MX91_PAD_GPIO_IO28__LPI2C3_SDA		0x4000199e>,
+			   <MX91_PAD_GPIO_IO29__LPI2C3_SCL		0x4000199e>;
+	};
+
+	pinctrl_pcf85063: pcf85063grp {
+		fsl,pins = <MX91_PAD_SAI1_RXD0__GPIO1_IO14		0x1000>;
+	};
+
+	pinctrl_pexp_irq: pexpirqgrp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX91_PAD_SAI1_TXC__GPIO1_IO12		0x1000>;
+	};
+
+	pinctrl_rgbdisp: rgbdispgrp {
+		fsl,pins = <MX91_PAD_GPIO_IO00__MEDIAMIX_DISP_CLK	0x31e>,
+			   <MX91_PAD_GPIO_IO01__MEDIAMIX_DISP_DE	0x31e>,
+			   <MX91_PAD_GPIO_IO02__MEDIAMIX_DISP_VSYNC	0x31e>,
+			   <MX91_PAD_GPIO_IO03__MEDIAMIX_DISP_HSYNC	0x31e>,
+			   <MX91_PAD_GPIO_IO04__MEDIAMIX_DISP_DATA0	0x31e>,
+			   <MX91_PAD_GPIO_IO05__MEDIAMIX_DISP_DATA1	0x31e>,
+			   <MX91_PAD_GPIO_IO06__MEDIAMIX_DISP_DATA2	0x31e>,
+			   <MX91_PAD_GPIO_IO07__MEDIAMIX_DISP_DATA3	0x31e>,
+			   <MX91_PAD_GPIO_IO08__MEDIAMIX_DISP_DATA4	0x31e>,
+			   <MX91_PAD_GPIO_IO09__MEDIAMIX_DISP_DATA5	0x31e>,
+			   <MX91_PAD_GPIO_IO10__MEDIAMIX_DISP_DATA6	0x31e>,
+			   <MX91_PAD_GPIO_IO11__MEDIAMIX_DISP_DATA7	0x31e>,
+			   <MX91_PAD_GPIO_IO12__MEDIAMIX_DISP_DATA8	0x31e>,
+			   <MX91_PAD_GPIO_IO13__MEDIAMIX_DISP_DATA9	0x31e>,
+			   <MX91_PAD_GPIO_IO14__MEDIAMIX_DISP_DATA10	0x31e>,
+			   <MX91_PAD_GPIO_IO15__MEDIAMIX_DISP_DATA11	0x31e>,
+			   <MX91_PAD_GPIO_IO16__MEDIAMIX_DISP_DATA12	0x31e>,
+			   <MX91_PAD_GPIO_IO17__MEDIAMIX_DISP_DATA13	0x31e>,
+			   <MX91_PAD_GPIO_IO18__MEDIAMIX_DISP_DATA14	0x31e>,
+			   <MX91_PAD_GPIO_IO19__MEDIAMIX_DISP_DATA15	0x31e>,
+			   <MX91_PAD_GPIO_IO20__MEDIAMIX_DISP_DATA16	0x31e>,
+			   <MX91_PAD_GPIO_IO21__MEDIAMIX_DISP_DATA17	0x31e>,
+			   <MX91_PAD_GPIO_IO22__MEDIAMIX_DISP_DATA18	0x31e>,
+			   <MX91_PAD_GPIO_IO23__MEDIAMIX_DISP_DATA19	0x31e>,
+			   <MX91_PAD_GPIO_IO24__MEDIAMIX_DISP_DATA20	0x31e>,
+			   <MX91_PAD_GPIO_IO25__MEDIAMIX_DISP_DATA21	0x31e>,
+			   <MX91_PAD_GPIO_IO26__MEDIAMIX_DISP_DATA22	0x31e>,
+			   <MX91_PAD_GPIO_IO27__MEDIAMIX_DISP_DATA23	0x31e>;
+	};
+
+	pinctrl_touch: touchgrp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX91_PAD_SAI1_TXFS__GPIO1_IO11		0x1000>;
+	};
+
+	pinctrl_tpm2: tpm2grp {
+		fsl,pins = <MX91_PAD_I2C2_SCL__TPM2_CH2			0x57e>;
+	};
+
+	pinctrl_typec: typecgrp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX91_PAD_PDM_BIT_STREAM1__GPIO1_IO10	0x1000>;
+	};
+
+	pinctrl_uart1: uart1grp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX91_PAD_UART1_RXD__LPUART1_RX		0x1000>,
+			   /* FSEL_2 | DSE X4 */
+			   <MX91_PAD_UART1_TXD__LPUART1_TX		0x011e>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX91_PAD_UART2_RXD__LPUART2_RX		0x1000>,
+			   /* FSEL_2 | DSE X4 */
+			   <MX91_PAD_UART2_TXD__LPUART2_TX		0x011e>,
+			   /* FSEL_2 | DSE X4 */
+			   <MX91_PAD_SAI1_TXD0__LPUART2_RTS_B		0x011e>;
+	};
+
+	pinctrl_usdhc2_gpio: usdhc2gpiogrp {
+		fsl,pins = /* HYS | FSEL_0 | No DSE */
+			   <MX91_PAD_SD2_CD_B__GPIO3_IO0		0x1000>;
+	};
+
+	/* enable SION for data and cmd pad due to ERR052021 */
+	pinctrl_usdhc2_hs: usdhc2hsgrp {
+		fsl,pins = /* PD | FSEL_3 | DSE X5 */
+			   <MX91_PAD_SD2_CLK__USDHC2_CLK		0x05be>,
+			   /* HYS | PU | FSEL_3 | DSE X4 */
+			   <MX91_PAD_SD2_CMD__USDHC2_CMD		0x4000139e>,
+			   /* HYS | PU | FSEL_3 | DSE X3 */
+			   <MX91_PAD_SD2_DATA0__USDHC2_DATA0		0x4000138e>,
+			   <MX91_PAD_SD2_DATA1__USDHC2_DATA1		0x4000138e>,
+			   <MX91_PAD_SD2_DATA2__USDHC2_DATA2		0x4000138e>,
+			   <MX91_PAD_SD2_DATA3__USDHC2_DATA3		0x4000138e>,
+			   /* FSEL_2 | DSE X3 */
+			   <MX91_PAD_SD2_VSELECT__USDHC2_VSELECT	0x010e>;
+	};
+
+	/* enable SION for data and cmd pad due to ERR052021 */
+	pinctrl_usdhc2_uhs: usdhc2uhsgrp {
+		fsl,pins = /* PD | FSEL_3 | DSE X6 */
+			   <MX91_PAD_SD2_CLK__USDHC2_CLK		0x05fe>,
+			   /* HYS | PU | FSEL_3 | DSE X4 */
+			   <MX91_PAD_SD2_CMD__USDHC2_CMD		0x4000139e>,
+			   <MX91_PAD_SD2_DATA0__USDHC2_DATA0		0x4000139e>,
+			   <MX91_PAD_SD2_DATA1__USDHC2_DATA1		0x4000139e>,
+			   <MX91_PAD_SD2_DATA2__USDHC2_DATA2		0x4000139e>,
+			   <MX91_PAD_SD2_DATA3__USDHC2_DATA3		0x4000139e>,
+			   /* FSEL_2 | DSE X3 */
+			   <MX91_PAD_SD2_VSELECT__USDHC2_VSELECT	0x010e>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx91-tqma9131.dtsi b/arch/arm64/boot/dts/freescale/imx91-tqma9131.dtsi
new file mode 100644
index 000000000000..5792952b7a8e
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx91-tqma9131.dtsi
@@ -0,0 +1,295 @@
+// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
+/*
+ * Copyright (c) 2022-2025 TQ-Systems GmbH <linux@ew.tq-group.com>,
+ * D-82229 Seefeld, Germany.
+ * Author: Markus Niebel
+ * Author: Alexander Stein
+ */
+
+#include "imx91.dtsi"
+
+/{
+	model = "TQ-Systems i.MX91 TQMa91xxCA / TQMa91xxLA SOM";
+	compatible = "tq,imx91-tqma9131", "fsl,imx91";
+
+	memory@80000000 {
+		device_type = "memory";
+		/* our minimum RAM config will be 1024 MiB */
+		reg = <0x00000000 0x80000000 0 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		/* default CMA, must not exceed assembled memory */
+		linux,cma {
+			compatible = "shared-dma-pool";
+			reusable;
+			alloc-ranges = <0 0x80000000 0 0x40000000>;
+			size = <0 0x10000000>;
+			linux,cma-default;
+		};
+
+		/* EdgeLock secure enclave  */
+		ele_reserved: ele-reserved@a4120000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0xa4120000 0 0x100000>;
+			no-map;
+		};
+	};
+
+	/* SD2 RST# via PMIC SW_EN */
+	reg_usdhc2_vmmc: regulator-usdhc2 {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+		regulator-name = "VSD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&buck4>;
+		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&adc1 {
+	vref-supply = <&buck5>;
+};
+
+&flexspi1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexspi1>;
+	status = "okay";
+
+	flash0: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		/*
+		 * no DQS, RXCLKSRC internal loop back, max 66 MHz
+		 * clk framework uses CLK_DIVIDER_ROUND_CLOSEST
+		 * selected value together with root from
+		 * IMX91_CLK_SYS_PLL_PFD1 @ 800.000.000 Hz helps to
+		 * respect the maximum value.
+		 */
+		spi-max-frequency = <62000000>;
+		spi-tx-bus-width = <4>;
+		spi-rx-bus-width = <4>;
+		vcc-supply = <&buck5>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+	};
+};
+
+&lpi2c1 {
+	clock-frequency = <400000>;
+	pinctrl-names = "default", "sleep";
+	pinctrl-0 = <&pinctrl_lpi2c1>;
+	pinctrl-1 = <&pinctrl_lpi2c1>;
+	status = "okay";
+
+	se97_som: temperature-sensor@1b {
+		compatible = "nxp,se97b", "jedec,jc-42.4-temp";
+		reg = <0x1b>;
+	};
+
+	pca9451a: pmic@25 {
+		compatible = "nxp,pca9451a";
+		reg = <0x25>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca9451>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		regulators {
+			/* V_0V8_SOC - hw developer guide: 0.75 .. 0.9 */
+			buck1: BUCK1 {
+				regulator-name = "BUCK1";
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <900000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* V_DDRQ - 1.1 V for LPDDR4 */
+			buck2: BUCK2 {
+				regulator-name = "BUCK2";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-ramp-delay = <3125>;
+			};
+
+			/* V_3V3 - EEPROM, RTC, ... */
+			buck4: BUCK4 {
+				regulator-name = "BUCK4";
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V8 - SPI NOR, eMMC, RAM VDD1... */
+			buck5: BUCK5 {
+				regulator-name = "BUCK5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V1 - RAM VDD2*/
+			buck6: BUCK6 {
+				regulator-name = "BUCK6";
+				regulator-min-microvolt = <1100000>;
+				regulator-max-microvolt = <1100000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_1V8_BBSM, fix 1.8 */
+			ldo1: LDO1 {
+				regulator-name = "LDO1";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_0V8_ANA */
+			ldo4: LDO4 {
+				regulator-name = "LDO4";
+				regulator-min-microvolt = <800000>;
+				regulator-max-microvolt = <800000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+
+			/* V_SD2 - 3.3/1.8V USDHC2 io Voltage */
+			ldo5: LDO5 {
+				regulator-name = "LDO5";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-boot-on;
+				regulator-always-on;
+			};
+		};
+	};
+
+	pcf85063: rtc@51 {
+		compatible = "nxp,pcf85063a";
+		reg = <0x51>;
+		quartz-load-femtofarads = <7000>;
+	};
+
+	eeprom0: eeprom@53 {
+		compatible = "nxp,se97b", "atmel,24c02";
+		reg = <0x53>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&buck4>;
+	};
+
+	eeprom1: eeprom@57 {
+		compatible = "atmel,24c64";
+		reg = <0x57>;
+		pagesize = <32>;
+		vcc-supply = <&buck4>;
+	};
+
+	/* protectable identification memory (part of M24C64-D @57) */
+	eeprom@5f {
+		compatible = "atmel,24c64d-wl";
+		reg = <0x5f>;
+		vcc-supply = <&buck4>;
+	};
+
+	accelerometer@6a {
+		compatible = "st,ism330dhcx";
+		reg = <0x6a>;
+		vdd-supply = <&buck4>;
+		vddio-supply = <&buck4>;
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1>;
+	pinctrl-2 = <&pinctrl_usdhc1>;
+	vmmc-supply = <&buck4>;
+	vqmmc-supply = <&buck5>;
+	bus-width = <8>;
+	non-removable;
+	no-sdio;
+	no-sd;
+	status = "okay";
+};
+
+&wdog3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_flexspi1: flexspi1grp {
+		fsl,pins = /* FSEL 3  | DSE X6 */
+			   <MX91_PAD_SD3_CMD__FLEXSPI1_A_SS0_B		0x01fe>,
+			   <MX91_PAD_SD3_CLK__FLEXSPI1_A_SCLK		0x01fe>,
+			   /* HYS | PU | FSEL 3  | DSE X6 */
+			   <MX91_PAD_SD3_DATA0__FLEXSPI1_A_DATA0	0x13fe>,
+			   <MX91_PAD_SD3_DATA1__FLEXSPI1_A_DATA1	0x13fe>,
+			   /* HYS | FSEL 3  | DSE X6 (external PU) */
+			   <MX91_PAD_SD3_DATA2__FLEXSPI1_A_DATA2	0x11fe>,
+			   <MX91_PAD_SD3_DATA3__FLEXSPI1_A_DATA3	0x11fe>;
+	};
+
+	pinctrl_lpi2c1: lpi2c1grp {
+		fsl,pins = /* SION | OD | FSEL 3 | DSE X4 */
+			   <MX91_PAD_I2C1_SCL__LPI2C1_SCL		0x4000199e>,
+			   <MX91_PAD_I2C1_SDA__LPI2C1_SDA		0x4000199e>;
+	};
+
+	pinctrl_pca9451: pca9451grp {
+		fsl,pins = /* HYS | PU */
+			   <MX91_PAD_I2C2_SDA__GPIO1_IO3		0x1200>;
+	};
+
+	pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+		fsl,pins = /* FSEL 2 | DSE X2 */
+			   <MX91_PAD_SD2_RESET_B__GPIO3_IO7		0x106>;
+	};
+
+	/* enable SION for data and cmd pad due to ERR052021 */
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = /* PD | FSEL 3 | DSE X5 */
+			   <MX91_PAD_SD1_CLK__USDHC1_CLK		0x5be>,
+			   /* HYS | FSEL 0 | no drive */
+			   <MX91_PAD_SD1_STROBE__USDHC1_STROBE		0x1000>,
+			   /* HYS | FSEL 3 | X5 */
+			   <MX91_PAD_SD1_CMD__USDHC1_CMD		0x400011be>,
+			   /* HYS | FSEL 3 | X4 */
+			   <MX91_PAD_SD1_DATA0__USDHC1_DATA0		0x4000119e>,
+			   <MX91_PAD_SD1_DATA1__USDHC1_DATA1		0x4000119e>,
+			   <MX91_PAD_SD1_DATA2__USDHC1_DATA2		0x4000119e>,
+			   <MX91_PAD_SD1_DATA3__USDHC1_DATA3		0x4000119e>,
+			   <MX91_PAD_SD1_DATA4__USDHC1_DATA4		0x4000119e>,
+			   <MX91_PAD_SD1_DATA5__USDHC1_DATA5		0x4000119e>,
+			   <MX91_PAD_SD1_DATA6__USDHC1_DATA6		0x4000119e>,
+			   <MX91_PAD_SD1_DATA7__USDHC1_DATA7		0x4000119e>;
+	};
+
+	pinctrl_wdog: wdoggrp {
+		fsl,pins = /* PU | FSEL 1 | DSE X4 */
+			   <MX91_PAD_WDOG_ANY__WDOG1_WDOG_ANY		0x31e>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx91.dtsi b/arch/arm64/boot/dts/freescale/imx91.dtsi
new file mode 100644
index 000000000000..4d8300b2a7bc
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx91.dtsi
@@ -0,0 +1,71 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2025 NXP
+ */
+
+#include "imx91-pinfunc.h"
+#include "imx91_93_common.dtsi"
+
+&clk {
+	compatible = "fsl,imx91-ccm";
+};
+
+&ddr_pmu {
+	compatible = "fsl,imx91-ddr-pmu", "fsl,imx93-ddr-pmu";
+};
+
+&eqos {
+	clocks = <&clk IMX91_CLK_ENET1_QOS_TSN_GATE>,
+		 <&clk IMX91_CLK_ENET1_QOS_TSN_GATE>,
+		 <&clk IMX91_CLK_ENET_TIMER>,
+		 <&clk IMX91_CLK_ENET1_QOS_TSN>,
+		 <&clk IMX91_CLK_ENET1_QOS_TSN_GATE>;
+	assigned-clocks = <&clk IMX91_CLK_ENET_TIMER>,
+			  <&clk IMX91_CLK_ENET1_QOS_TSN>;
+	assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+				 <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>;
+	assigned-clock-rates = <100000000>, <250000000>;
+};
+
+&fec {
+	clocks = <&clk IMX91_CLK_ENET2_REGULAR_GATE>,
+		 <&clk IMX91_CLK_ENET2_REGULAR_GATE>,
+		 <&clk IMX91_CLK_ENET_TIMER>,
+		 <&clk IMX91_CLK_ENET2_REGULAR>,
+		 <&clk IMX93_CLK_DUMMY>;
+	assigned-clocks = <&clk IMX91_CLK_ENET_TIMER>,
+			  <&clk IMX91_CLK_ENET2_REGULAR>;
+	assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+				 <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>;
+	assigned-clock-rates = <100000000>, <250000000>;
+};
+
+&i3c1 {
+	clocks = <&clk IMX93_CLK_BUS_AON>,
+		 <&clk IMX93_CLK_I3C1_GATE>,
+		 <&clk IMX93_CLK_DUMMY>;
+};
+
+&i3c2 {
+	clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+		 <&clk IMX93_CLK_I3C2_GATE>,
+		 <&clk IMX93_CLK_DUMMY>;
+};
+
+&iomuxc {
+	compatible = "fsl,imx91-iomuxc";
+};
+
+&media_blk_ctrl {
+	compatible = "fsl,imx91-media-blk-ctrl", "syscon";
+	clocks = <&clk IMX93_CLK_MEDIA_APB>,
+		 <&clk IMX93_CLK_MEDIA_AXI>,
+		 <&clk IMX93_CLK_NIC_MEDIA_GATE>,
+		 <&clk IMX93_CLK_MEDIA_DISP_PIX>,
+		 <&clk IMX93_CLK_CAM_PIX>,
+		 <&clk IMX93_CLK_LCDIF_GATE>,
+		 <&clk IMX93_CLK_ISI_GATE>,
+		 <&clk IMX93_CLK_MIPI_CSI_GATE>;
+	clock-names = "apb", "axi", "nic", "disp", "cam",
+		      "lcdif", "isi", "csi";
+};
diff --git a/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi b/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi
new file mode 100644
index 000000000000..52da571f26c4
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx91_93_common.dtsi
@@ -0,0 +1,1187 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright 2022,2025 NXP
+ */
+
+#include <dt-bindings/clock/imx93-clock.h>
+#include <dt-bindings/dma/fsl-edma.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/power/fsl,imx93-power.h>
+#include <dt-bindings/thermal/thermal.h>
+
+#include "imx93-pinfunc.h"
+
+/ {
+	interrupt-parent = <&gic>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus: cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		idle-states {
+			entry-method = "psci";
+
+			cpu_pd_wait: cpu-pd-wait {
+				compatible = "arm,idle-state";
+				arm,psci-suspend-param = <0x0010033>;
+				local-timer-stop;
+				entry-latency-us = <10000>;
+				exit-latency-us = <7000>;
+				min-residency-us = <27000>;
+				wakeup-latency-us = <15000>;
+			};
+		};
+
+		A55_0: cpu@0 {
+			device_type = "cpu";
+			compatible = "arm,cortex-a55";
+			reg = <0x0>;
+			enable-method = "psci";
+			#cooling-cells = <2>;
+			cpu-idle-states = <&cpu_pd_wait>;
+		};
+	};
+
+	osc_32k: clock-osc-32k {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <32768>;
+		clock-output-names = "osc_32k";
+	};
+
+	osc_24m: clock-osc-24m {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+		clock-output-names = "osc_24m";
+	};
+
+	clk_ext1: clock-ext1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <133000000>;
+		clock-output-names = "clk_ext1";
+	};
+
+	pmu {
+		compatible = "arm,cortex-a55-pmu";
+		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0";
+		method = "smc";
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
+		clock-frequency = <24000000>;
+		arm,no-tick-in-suspend;
+		interrupt-parent = <&gic>;
+	};
+
+	gic: interrupt-controller@48000000 {
+		compatible = "arm,gic-v3";
+		reg = <0 0x48000000 0 0x10000>,
+		      <0 0x48040000 0 0xc0000>;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-parent = <&gic>;
+	};
+
+	mqs1: mqs1 {
+		compatible = "fsl,imx93-mqs";
+		gpr = <&aonmix_ns_gpr>;
+		status = "disabled";
+	};
+
+	mqs2: mqs2 {
+		compatible = "fsl,imx93-mqs";
+		gpr = <&wakeupmix_gpr>;
+		status = "disabled";
+	};
+
+	usbphynop1: usbphynop1 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+		clocks = <&clk IMX93_CLK_USB_PHY_BURUNIN>;
+		clock-names = "main_clk";
+	};
+
+	usbphynop2: usbphynop2 {
+		compatible = "usb-nop-xceiv";
+		#phy-cells = <0>;
+		clocks = <&clk IMX93_CLK_USB_PHY_BURUNIN>;
+		clock-names = "main_clk";
+	};
+
+	soc@0 {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x0 0x80000000>,
+			 <0x28000000 0x0 0x28000000 0x10000000>;
+
+		aips1: bus@44000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x44000000 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			edma1: dma-controller@44000000 {
+				compatible = "fsl,imx93-edma3";
+				reg = <0x44000000 0x200000>;
+				#dma-cells = <3>;
+				dma-channels = <31>;
+				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,  //  0: Reserved
+					     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,  //  1: CANFD1
+					     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,  //  2: Reserved
+					     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,  //  3: GPIO1 CH0
+					     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,  //  4: GPIO1 CH1
+					     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, //  5: I3C1 TO Bus
+					     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, //  6: I3C1 From Bus
+					     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, //  7: LPI2C1 M TX
+					     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, //  8: LPI2C1 S TX
+					     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, //  9: LPI2C2 M RX
+					     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, // 10: LPI2C2 S RX
+					     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, // 11: LPSPI1 TX
+					     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, // 12: LPSPI1 RX
+					     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, // 13: LPSPI2 TX
+					     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, // 14: LPSPI2 RX
+					     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, // 15: LPTMR1
+					     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, // 16: LPUART1 TX
+					     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, // 17: LPUART1 RX
+					     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, // 18: LPUART2 TX
+					     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, // 19: LPUART2 RX
+					     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, // 20: S400
+					     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, // 21: SAI TX
+					     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, // 22: SAI RX
+					     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, // 23: TPM1 CH0/CH2
+					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, // 24: TPM1 CH1/CH3
+					     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, // 25: TPM1 Overflow
+					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, // 26: TMP2 CH0/CH2
+					     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, // 27: TMP2 CH1/CH3
+					     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, // 28: TMP2 Overflow
+					     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, // 29: PDM
+					     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, // 30: ADC1
+					     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;  // err
+				clocks = <&clk IMX93_CLK_EDMA1_GATE>;
+				clock-names = "dma";
+			};
+
+			aonmix_ns_gpr: syscon@44210000 {
+				compatible = "fsl,imx93-aonmix-ns-syscfg", "syscon";
+				reg = <0x44210000 0x1000>;
+			};
+
+			system_counter: timer@44290000 {
+				compatible = "nxp,sysctr-timer";
+				reg = <0x44290000 0x30000>;
+				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&osc_24m>;
+				clock-names = "per";
+				nxp,no-divider;
+			};
+
+			wdog1: watchdog@442d0000 {
+				compatible = "fsl,imx93-wdt";
+				reg = <0x442d0000 0x10000>;
+				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_WDOG1_GATE>;
+				timeout-sec = <40>;
+				status = "disabled";
+			};
+
+			wdog2: watchdog@442e0000 {
+				compatible = "fsl,imx93-wdt";
+				reg = <0x442e0000 0x10000>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_WDOG2_GATE>;
+				timeout-sec = <40>;
+				status = "disabled";
+			};
+
+			tpm1: pwm@44310000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x44310000 0x1000>;
+				clocks = <&clk IMX93_CLK_TPM1_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm2: pwm@44320000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x44320000 0x10000>;
+				clocks = <&clk IMX93_CLK_TPM2_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			i3c1: i3c@44330000 {
+				compatible = "silvaco,i3c-master-v1";
+				reg = <0x44330000 0x10000>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <3>;
+				#size-cells = <0>;
+				clocks = <&clk IMX93_CLK_BUS_AON>,
+					 <&clk IMX93_CLK_I3C1_GATE>,
+					 <&clk IMX93_CLK_I3C1_SLOW>;
+				clock-names = "pclk", "fast_clk", "slow_clk";
+				status = "disabled";
+			};
+
+			lpi2c1: i2c@44340000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x44340000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C1_GATE>,
+					 <&clk IMX93_CLK_BUS_AON>;
+				clock-names = "per", "ipg";
+				dmas = <&edma1 7 0 0>, <&edma1 8 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c2: i2c@44350000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x44350000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C2_GATE>,
+					 <&clk IMX93_CLK_BUS_AON>;
+				clock-names = "per", "ipg";
+				dmas = <&edma1 9 0 0>, <&edma1 10 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi1: spi@44360000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x44360000 0x10000>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI1_GATE>,
+					 <&clk IMX93_CLK_BUS_AON>;
+				clock-names = "per", "ipg";
+				dmas = <&edma1 11 0 0>, <&edma1 12 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi2: spi@44370000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x44370000 0x10000>;
+				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI2_GATE>,
+					 <&clk IMX93_CLK_BUS_AON>;
+				clock-names = "per", "ipg";
+				dmas = <&edma1 13 0 0>, <&edma1 14 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpuart1: serial@44380000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x44380000 0x1000>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART1_GATE>;
+				clock-names = "ipg";
+				dmas = <&edma1 17 0 FSL_EDMA_RX>, <&edma1 16 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart2: serial@44390000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x44390000 0x1000>;
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART2_GATE>;
+				clock-names = "ipg";
+				dmas = <&edma1 19 0 FSL_EDMA_RX>, <&edma1 18 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			flexcan1: can@443a0000 {
+				compatible = "fsl,imx93-flexcan";
+				reg = <0x443a0000 0x10000>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_BUS_AON>,
+					 <&clk IMX93_CLK_CAN1_GATE>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&clk IMX93_CLK_CAN1>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+				assigned-clock-rates = <40000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				fsl,stop-mode = <&aonmix_ns_gpr 0x14 0>;
+				status = "disabled";
+			};
+
+			sai1: sai@443b0000 {
+				compatible = "fsl,imx93-sai";
+				reg = <0x443b0000 0x10000>;
+				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_SAI1_IPG>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_SAI1_GATE>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_DUMMY>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma1 22 0 FSL_EDMA_RX>, <&edma1 21 0 0>;
+				dma-names = "rx", "tx";
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			iomuxc: pinctrl@443c0000 {
+				compatible = "fsl,imx93-iomuxc";
+				reg = <0x443c0000 0x10000>;
+				status = "okay";
+			};
+
+			bbnsm: bbnsm@44440000 {
+				compatible = "nxp,imx93-bbnsm", "syscon", "simple-mfd";
+				reg = <0x44440000 0x10000>;
+
+				bbnsm_rtc: rtc {
+					compatible = "nxp,imx93-bbnsm-rtc";
+					interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+				};
+
+				bbnsm_pwrkey: pwrkey {
+					compatible = "nxp,imx93-bbnsm-pwrkey";
+					interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
+					linux,code = <KEY_POWER>;
+				};
+			};
+
+			clk: clock-controller@44450000 {
+				compatible = "fsl,imx93-ccm";
+				reg = <0x44450000 0x10000>;
+				#clock-cells = <1>;
+				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>;
+				clock-names = "osc_32k", "osc_24m", "clk_ext1";
+				assigned-clocks = <&clk IMX93_CLK_AUDIO_PLL>;
+				assigned-clock-rates = <393216000>;
+				status = "okay";
+			};
+
+			src: system-controller@44460000 {
+				compatible = "fsl,imx93-src", "syscon";
+				reg = <0x44460000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+
+				mediamix: power-domain@44462400 {
+					compatible = "fsl,imx93-src-slice";
+					reg = <0x44462400 0x400>, <0x44465800 0x400>;
+					#power-domain-cells = <0>;
+					clocks = <&clk IMX93_CLK_NIC_MEDIA_GATE>,
+						 <&clk IMX93_CLK_MEDIA_APB>;
+				};
+			};
+
+			clock-controller@44480000 {
+				compatible = "fsl,imx93-anatop";
+				reg = <0x44480000 0x2000>;
+				#clock-cells = <1>;
+			};
+
+			micfil: micfil@44520000 {
+				compatible = "fsl,imx93-micfil";
+				reg = <0x44520000 0x10000>;
+				interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_PDM_IPG>,
+					 <&clk IMX93_CLK_PDM_GATE>,
+					 <&clk IMX93_CLK_AUDIO_PLL>;
+				clock-names = "ipg_clk", "ipg_clk_app", "pll8k";
+				dmas = <&edma1 29 0 5>;
+				dma-names = "rx";
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			adc1: adc@44530000 {
+				compatible = "nxp,imx93-adc";
+				reg = <0x44530000 0x10000>;
+				interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_ADC1_GATE>;
+				clock-names = "ipg";
+				#io-channel-cells = <1>;
+				status = "disabled";
+			};
+		};
+
+		aips2: bus@42000000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x42000000 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			edma2: dma-controller@42000000 {
+				compatible = "fsl,imx93-edma4";
+				reg = <0x42000000 0x210000>;
+				#dma-cells = <3>;
+				dma-channels = <64>;
+				interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_EDMA2_GATE>;
+				clock-names = "dma";
+			};
+
+			wakeupmix_gpr: syscon@42420000 {
+				compatible = "fsl,imx93-wakeupmix-syscfg", "syscon";
+				reg = <0x42420000 0x1000>;
+			};
+
+			wdog3: watchdog@42490000 {
+				compatible = "fsl,imx93-wdt";
+				reg = <0x42490000 0x10000>;
+				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_WDOG3_GATE>;
+				timeout-sec = <40>;
+				status = "disabled";
+			};
+
+			wdog4: watchdog@424a0000 {
+				compatible = "fsl,imx93-wdt";
+				reg = <0x424a0000 0x10000>;
+				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_WDOG4_GATE>;
+				timeout-sec = <40>;
+				status = "disabled";
+			};
+
+			wdog5: watchdog@424b0000 {
+				compatible = "fsl,imx93-wdt";
+				reg = <0x424b0000 0x10000>;
+				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_WDOG5_GATE>;
+				timeout-sec = <40>;
+				status = "disabled";
+			};
+
+			tpm3: pwm@424e0000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x424e0000 0x1000>;
+				clocks = <&clk IMX93_CLK_TPM3_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm4: pwm@424f0000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x424f0000 0x10000>;
+				clocks = <&clk IMX93_CLK_TPM4_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm5: pwm@42500000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x42500000 0x10000>;
+				clocks = <&clk IMX93_CLK_TPM5_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			tpm6: pwm@42510000 {
+				compatible = "fsl,imx7ulp-pwm";
+				reg = <0x42510000 0x10000>;
+				clocks = <&clk IMX93_CLK_TPM6_GATE>;
+				#pwm-cells = <3>;
+				status = "disabled";
+			};
+
+			i3c2: i3c@42520000 {
+				compatible = "silvaco,i3c-master-v1";
+				reg = <0x42520000 0x10000>;
+				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <3>;
+				#size-cells = <0>;
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_I3C2_GATE>,
+					 <&clk IMX93_CLK_I3C2_SLOW>;
+				clock-names = "pclk", "fast_clk", "slow_clk";
+				status = "disabled";
+			};
+
+			lpi2c3: i2c@42530000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x42530000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C3_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 8 0 0>, <&edma2 9 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c4: i2c@42540000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x42540000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C4_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 10 0 0>, <&edma2 11 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi3: spi@42550000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x42550000 0x10000>;
+				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI3_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 12 0 0>, <&edma2 13 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi4: spi@42560000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x42560000 0x10000>;
+				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI4_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 14 0 0>, <&edma2 15 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpuart3: serial@42570000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x42570000 0x1000>;
+				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART3_GATE>;
+				clock-names = "ipg";
+				dmas = <&edma2 18 0 FSL_EDMA_RX>, <&edma2 17 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart4: serial@42580000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x42580000 0x1000>;
+				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART4_GATE>;
+				clock-names = "ipg";
+				dmas = <&edma2 20 0 FSL_EDMA_RX>, <&edma2 19 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart5: serial@42590000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x42590000 0x1000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART5_GATE>;
+				clock-names = "ipg";
+				dmas = <&edma2 22 0 FSL_EDMA_RX>, <&edma2 21 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart6: serial@425a0000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x425a0000 0x1000>;
+				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART6_GATE>;
+				clock-names = "ipg";
+				dmas = <&edma2 24 0 FSL_EDMA_RX>, <&edma2 23 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			flexcan2: can@425b0000 {
+				compatible = "fsl,imx93-flexcan";
+				reg = <0x425b0000 0x10000>;
+				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_CAN2_GATE>;
+				clock-names = "ipg", "per";
+				assigned-clocks = <&clk IMX93_CLK_CAN2>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+				assigned-clock-rates = <40000000>;
+				fsl,clk-source = /bits/ 8 <0>;
+				fsl,stop-mode = <&wakeupmix_gpr 0x0c 2>;
+				status = "disabled";
+			};
+
+			flexspi1: spi@425e0000 {
+				compatible = "nxp,imx8mm-fspi";
+				reg = <0x425e0000 0x10000>, <0x28000000 0x10000000>;
+				reg-names = "fspi_base", "fspi_mmap";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_FLEXSPI1_GATE>,
+					 <&clk IMX93_CLK_FLEXSPI1_GATE>;
+				clock-names = "fspi_en", "fspi";
+				assigned-clocks = <&clk IMX93_CLK_FLEXSPI1>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
+				status = "disabled";
+			};
+
+			sai2: sai@42650000 {
+				compatible = "fsl,imx93-sai";
+				reg = <0x42650000 0x10000>;
+				interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_SAI2_IPG>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_SAI2_GATE>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_DUMMY>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 59 0 FSL_EDMA_RX>, <&edma2 58 0 0>;
+				dma-names = "rx", "tx";
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			sai3: sai@42660000 {
+				compatible = "fsl,imx93-sai";
+				reg = <0x42660000 0x10000>;
+				interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_SAI3_IPG>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_SAI3_GATE>, <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_DUMMY>;
+				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
+				dmas = <&edma2 61 0 FSL_EDMA_RX>, <&edma2 60 0 0>;
+				dma-names = "rx", "tx";
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			xcvr: xcvr@42680000 {
+				compatible = "fsl,imx93-xcvr";
+				reg = <0x42680000 0x800>,
+				      <0x42680800 0x400>,
+				      <0x42680c00 0x080>,
+				      <0x42680e00 0x080>;
+				reg-names = "ram", "regs", "rxfifo", "txfifo";
+				interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_SPDIF_IPG>,
+					 <&clk IMX93_CLK_SPDIF_GATE>,
+					 <&clk IMX93_CLK_DUMMY>,
+					 <&clk IMX93_CLK_AUD_XCVR_GATE>;
+				clock-names = "ipg", "phy", "spba", "pll_ipg";
+				dmas = <&edma2 65 0 FSL_EDMA_RX>, <&edma2 66 0 0>;
+				dma-names = "rx", "tx";
+				#sound-dai-cells = <0>;
+				status = "disabled";
+			};
+
+			lpuart7: serial@42690000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x42690000 0x1000>;
+				interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART7_GATE>;
+				clock-names = "ipg";
+				dmas = <&edma2 88 0 FSL_EDMA_RX>, <&edma2 87 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpuart8: serial@426a0000 {
+				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
+				reg = <0x426a0000 0x1000>;
+				interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPUART8_GATE>;
+				clock-names = "ipg";
+				dmas = <&edma2 90 0 FSL_EDMA_RX>, <&edma2 89 0 0>;
+				dma-names = "rx", "tx";
+				status = "disabled";
+			};
+
+			lpi2c5: i2c@426b0000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426b0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C5_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 71 0 0>, <&edma2 72 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c6: i2c@426c0000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426c0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C6_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 73 0 0>, <&edma2 74 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c7: i2c@426d0000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426d0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C7_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 75 0 0>, <&edma2 76 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpi2c8: i2c@426e0000 {
+				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
+				reg = <0x426e0000 0x10000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPI2C8_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 77 0 0>, <&edma2 78 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi5: spi@426f0000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x426f0000 0x10000>;
+				interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI5_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 79 0 0>, <&edma2 80 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi6: spi@42700000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x42700000 0x10000>;
+				interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI6_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 81 0 0>, <&edma2 82 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi7: spi@42710000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x42710000 0x10000>;
+				interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI7_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 83 0 0>, <&edma2 84 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+			lpspi8: spi@42720000 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
+				reg = <0x42720000 0x10000>;
+				interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_LPSPI8_GATE>,
+					 <&clk IMX93_CLK_BUS_WAKEUP>;
+				clock-names = "per", "ipg";
+				dmas = <&edma2 85 0 0>, <&edma2 86 0 FSL_EDMA_RX>;
+				dma-names = "tx", "rx";
+				status = "disabled";
+			};
+
+		};
+
+		aips3: bus@42800000 {
+			compatible = "fsl,aips-bus", "simple-bus";
+			reg = <0x42800000 0x800000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges;
+
+			usdhc1: mmc@42850000 {
+				compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x42850000 0x10000>;
+				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_WAKEUP_AXI>,
+					 <&clk IMX93_CLK_USDHC1_GATE>;
+				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&clk IMX93_CLK_USDHC1>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
+				assigned-clock-rates = <400000000>;
+				bus-width = <8>;
+				fsl,tuning-start-tap = <1>;
+				fsl,tuning-step = <2>;
+				status = "disabled";
+			};
+
+			usdhc2: mmc@42860000 {
+				compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x42860000 0x10000>;
+				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_WAKEUP_AXI>,
+					 <&clk IMX93_CLK_USDHC2_GATE>;
+				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&clk IMX93_CLK_USDHC2>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
+				assigned-clock-rates = <400000000>;
+				bus-width = <4>;
+				fsl,tuning-start-tap = <1>;
+				fsl,tuning-step = <2>;
+				status = "disabled";
+			};
+
+			fec: ethernet@42890000 {
+				compatible = "fsl,imx93-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec";
+				reg = <0x42890000 0x10000>;
+				interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_ENET1_GATE>,
+					 <&clk IMX93_CLK_ENET1_GATE>,
+					 <&clk IMX93_CLK_ENET_TIMER1>,
+					 <&clk IMX93_CLK_ENET_REF>,
+					 <&clk IMX93_CLK_ENET_REF_PHY>;
+				clock-names = "ipg", "ahb", "ptp",
+					      "enet_clk_ref", "enet_out";
+				assigned-clocks = <&clk IMX93_CLK_ENET_TIMER1>,
+						  <&clk IMX93_CLK_ENET_REF>,
+						  <&clk IMX93_CLK_ENET_REF_PHY>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+							 <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>,
+							 <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+				assigned-clock-rates = <100000000>, <250000000>, <50000000>;
+				fsl,num-tx-queues = <3>;
+				fsl,num-rx-queues = <3>;
+				fsl,stop-mode = <&wakeupmix_gpr 0x0c 1>;
+				nvmem-cells = <&eth_mac1>;
+				nvmem-cell-names = "mac-address";
+				status = "disabled";
+			};
+
+			eqos: ethernet@428a0000 {
+				compatible = "nxp,imx93-dwmac-eqos", "snps,dwmac-5.10a";
+				reg = <0x428a0000 0x10000>;
+				interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
+					     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
+				interrupt-names = "macirq", "eth_wake_irq";
+				clocks = <&clk IMX93_CLK_ENET_QOS_GATE>,
+					 <&clk IMX93_CLK_ENET_QOS_GATE>,
+					 <&clk IMX93_CLK_ENET_TIMER2>,
+					 <&clk IMX93_CLK_ENET>,
+					 <&clk IMX93_CLK_ENET_QOS_GATE>;
+				clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "mem";
+				assigned-clocks = <&clk IMX93_CLK_ENET_TIMER2>,
+						  <&clk IMX93_CLK_ENET>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
+							 <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>;
+				assigned-clock-rates = <100000000>, <250000000>;
+				intf_mode = <&wakeupmix_gpr 0x28>;
+				snps,clk-csr = <6>;
+				nvmem-cells = <&eth_mac2>;
+				nvmem-cell-names = "mac-address";
+				status = "disabled";
+			};
+
+			usdhc3: mmc@428b0000 {
+				compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
+				reg = <0x428b0000 0x10000>;
+				interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
+					 <&clk IMX93_CLK_WAKEUP_AXI>,
+					 <&clk IMX93_CLK_USDHC3_GATE>;
+				clock-names = "ipg", "ahb", "per";
+				assigned-clocks = <&clk IMX93_CLK_USDHC3>;
+				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
+				assigned-clock-rates = <400000000>;
+				bus-width = <4>;
+				fsl,tuning-start-tap = <1>;
+				fsl,tuning-step = <2>;
+				status = "disabled";
+			};
+		};
+
+		gpio2: gpio@43810000 {
+			compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x43810000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clk IMX93_CLK_GPIO2_GATE>,
+				 <&clk IMX93_CLK_GPIO2_GATE>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&iomuxc 0 4 30>;
+			ngpios = <30>;
+		};
+
+		gpio3: gpio@43820000 {
+			compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x43820000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clk IMX93_CLK_GPIO3_GATE>,
+				 <&clk IMX93_CLK_GPIO3_GATE>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&iomuxc 0 84 8>, <&iomuxc 8 66 18>,
+				      <&iomuxc 26 34 2>, <&iomuxc 28 0 4>;
+			ngpios = <32>;
+		};
+
+		gpio4: gpio@43830000 {
+			compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x43830000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clk IMX93_CLK_GPIO4_GATE>,
+				 <&clk IMX93_CLK_GPIO4_GATE>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&iomuxc 0 38 28>, <&iomuxc 28 36 2>;
+			ngpios = <30>;
+		};
+
+		gpio1: gpio@47400000 {
+			compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
+			reg = <0x47400000 0x1000>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			clocks = <&clk IMX93_CLK_GPIO1_GATE>,
+				 <&clk IMX93_CLK_GPIO1_GATE>;
+			clock-names = "gpio", "port";
+			gpio-ranges = <&iomuxc 0 92 16>;
+			ngpios = <16>;
+		};
+
+		ocotp: efuse@47510000 {
+			compatible = "fsl,imx93-ocotp", "syscon";
+			reg = <0x47510000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth_mac1: mac-address@4ec {
+				reg = <0x4ec 0x6>;
+			};
+
+			eth_mac2: mac-address@4f2 {
+				reg = <0x4f2 0x6>;
+			};
+
+		};
+
+		s4muap: mailbox@47520000 {
+			compatible = "fsl,imx93-mu-s4";
+			reg = <0x47520000 0x10000>;
+			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			#mbox-cells = <2>;
+		};
+
+		media_blk_ctrl: system-controller@4ac10000 {
+			compatible = "fsl,imx93-media-blk-ctrl", "syscon";
+			reg = <0x4ac10000 0x10000>;
+			power-domains = <&mediamix>;
+			clocks = <&clk IMX93_CLK_MEDIA_APB>,
+				 <&clk IMX93_CLK_MEDIA_AXI>,
+				 <&clk IMX93_CLK_NIC_MEDIA_GATE>,
+				 <&clk IMX93_CLK_MEDIA_DISP_PIX>,
+				 <&clk IMX93_CLK_CAM_PIX>,
+				 <&clk IMX93_CLK_PXP_GATE>,
+				 <&clk IMX93_CLK_LCDIF_GATE>,
+				 <&clk IMX93_CLK_ISI_GATE>,
+				 <&clk IMX93_CLK_MIPI_CSI_GATE>,
+				 <&clk IMX93_CLK_MIPI_DSI_GATE>;
+			clock-names = "apb", "axi", "nic", "disp", "cam",
+				      "pxp", "lcdif", "isi", "csi", "dsi";
+			#power-domain-cells = <1>;
+			status = "disabled";
+		};
+
+		usbotg1: usb@4c100000 {
+			compatible = "fsl,imx93-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
+			reg = <0x4c100000 0x200>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX93_CLK_USB_CONTROLLER_GATE>,
+				 <&clk IMX93_CLK_HSIO_32K_GATE>;
+			clock-names = "usb_ctrl_root", "usb_wakeup";
+			assigned-clocks = <&clk IMX93_CLK_HSIO>;
+			assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+			assigned-clock-rates = <133000000>;
+			phys = <&usbphynop1>;
+			fsl,usbmisc = <&usbmisc1 0>;
+			status = "disabled";
+		};
+
+		usbmisc1: usbmisc@4c100200 {
+			compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc",
+				     "fsl,imx6q-usbmisc";
+			reg = <0x4c100200 0x200>;
+			#index-cells = <1>;
+		};
+
+		usbotg2: usb@4c200000 {
+			compatible = "fsl,imx93-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
+			reg = <0x4c200000 0x200>;
+			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk IMX93_CLK_USB_CONTROLLER_GATE>,
+				 <&clk IMX93_CLK_HSIO_32K_GATE>;
+			clock-names = "usb_ctrl_root", "usb_wakeup";
+			assigned-clocks = <&clk IMX93_CLK_HSIO>;
+			assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
+			assigned-clock-rates = <133000000>;
+			phys = <&usbphynop2>;
+			fsl,usbmisc = <&usbmisc2 0>;
+			status = "disabled";
+		};
+
+		usbmisc2: usbmisc@4c200200 {
+			compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc",
+				     "fsl,imx6q-usbmisc";
+			reg = <0x4c200200 0x200>;
+			#index-cells = <1>;
+		};
+
+		memory-controller@4e300000 {
+			compatible = "nxp,imx9-memory-controller";
+			reg = <0x4e300000 0x800>, <0x4e301000 0x1000>;
+			reg-names = "ctrl", "inject";
+			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
+			little-endian;
+		};
+
+		ddr_pmu: ddr-pmu@4e300dc0 {
+			compatible = "fsl,imx93-ddr-pmu";
+			reg = <0x4e300dc0 0x200>;
+			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
index e24e12f04526..b94a24193e19 100644
--- a/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts
@@ -12,6 +12,25 @@
 	model = "NXP i.MX93 11X11 EVK board";
 	compatible = "fsl,imx93-11x11-evk", "fsl,imx93";
 
+	aliases {
+		ethernet0 = &fec;
+		ethernet1 = &eqos;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		rtc0 = &bbnsm_rtc;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		serial2 = &lpuart3;
+		serial3 = &lpuart4;
+		serial4 = &lpuart5;
+	};
+
 	chosen {
 		stdout-path = &lpuart1;
 	};
@@ -272,7 +291,6 @@
 
 		ethphy2: ethernet-phy@2 {
 			reg = <2>;
-			eee-broken-1000t;
 			reset-gpios = <&pcal6524 16 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <10000>;
 			reset-deassert-us = <80000>;
diff --git a/arch/arm64/boot/dts/freescale/imx93-14x14-evk.dts b/arch/arm64/boot/dts/freescale/imx93-14x14-evk.dts
index c5d86b54ad33..f9eebd27d640 100644
--- a/arch/arm64/boot/dts/freescale/imx93-14x14-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-14x14-evk.dts
@@ -12,6 +12,21 @@
 	model = "NXP i.MX93 14X14 EVK board";
 	compatible = "fsl,imx93-14x14-evk", "fsl,imx93";
 
+	aliases {
+		ethernet0 = &fec;
+		ethernet1 = &eqos;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		rtc0 = &bbnsm_rtc;
+		serial0 = &lpuart1;
+	};
+
 	chosen {
 		stdout-path = &lpuart1;
 	};
@@ -276,7 +291,7 @@
 				regulator-ramp-delay = <3125>;
 			};
 
-			buck4: BUCK4{
+			buck4: BUCK4 {
 				regulator-name = "BUCK4";
 				regulator-min-microvolt = <1620000>;
 				regulator-max-microvolt = <3400000>;
@@ -284,7 +299,7 @@
 				regulator-always-on;
 			};
 
-			buck5: BUCK5{
+			buck5: BUCK5 {
 				regulator-name = "BUCK5";
 				regulator-min-microvolt = <1620000>;
 				regulator-max-microvolt = <3400000>;
diff --git a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
index f6f8d105b737..0852067eab2c 100644
--- a/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-9x9-qsb.dts
@@ -17,6 +17,24 @@
 		compatible = "linux,bt-sco";
 	};
 
+	aliases {
+		ethernet0 = &fec;
+		ethernet1 = &eqos;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		rtc0 = &bbnsm_rtc;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		serial2 = &lpuart3;
+		serial3 = &lpuart4;
+		serial4 = &lpuart5;
+	};
+
 	chosen {
 		stdout-path = &lpuart1;
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx93-kontron-bl-osm-s.dts b/arch/arm64/boot/dts/freescale/imx93-kontron-bl-osm-s.dts
index 89e97c604bd3..4620c070f4d7 100644
--- a/arch/arm64/boot/dts/freescale/imx93-kontron-bl-osm-s.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-kontron-bl-osm-s.dts
@@ -14,6 +14,27 @@
 	aliases {
 		ethernet0 = &fec;
 		ethernet1 = &eqos;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		serial2 = &lpuart3;
+		serial3 = &lpuart4;
+		serial4 = &lpuart5;
+		serial5 = &lpuart6;
+		serial6 = &lpuart7;
+		spi0 = &lpspi1;
+		spi1 = &lpspi2;
+		spi2 = &lpspi3;
+		spi3 = &lpspi4;
+		spi4 = &lpspi5;
+		spi5 = &lpspi6;
+		spi6 = &lpspi7;
+		spi7 = &lpspi8;
 	};
 
 	leds {
@@ -33,7 +54,9 @@
 
 	reg_vcc_panel: regulator-vcc-panel {
 		compatible = "regulator-fixed";
-		gpio = <&gpio4 3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_vcc_panel>;
+		gpio = <&gpio2 21 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		regulator-max-microvolt = <3300000>;
 		regulator-min-microvolt = <3300000>;
@@ -135,6 +158,16 @@
 };
 
 &usbotg1 {
+	adp-disable;
+	hnp-disable;
+	srp-disable;
+	disable-over-current;
+	dr_mode = "otg";
+	usb-role-switch;
+	status = "okay";
+};
+
+&usbotg2 {
 	#address-cells = <1>;
 	#size-cells = <0>;
 	disable-over-current;
@@ -147,17 +180,15 @@
 	};
 };
 
-&usbotg2 {
-	adp-disable;
-	hnp-disable;
-	srp-disable;
-	disable-over-current;
-	dr_mode = "otg";
-	usb-role-switch;
-	status = "okay";
-};
-
 &usdhc2 {
 	vmmc-supply = <&reg_vdd_3v3>;
 	status = "okay";
 };
+
+&iomuxc {
+	pinctrl_reg_vcc_panel: regvccpanelgrp {
+		fsl,pins = <
+			MX93_PAD_GPIO_IO21__GPIO2_IO21		0x31e /* PWM_2 */
+		>;
+	};
+};
diff --git a/arch/arm64/boot/dts/freescale/imx93-kontron-osm-s.dtsi b/arch/arm64/boot/dts/freescale/imx93-kontron-osm-s.dtsi
index 119a16207059..c79b1df339db 100644
--- a/arch/arm64/boot/dts/freescale/imx93-kontron-osm-s.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93-kontron-osm-s.dtsi
@@ -205,6 +205,9 @@
 	rv3028: rtc@52 {
 		compatible = "microcrystal,rv3028";
 		reg = <0x52>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_rtc>;
+		interrupts-extended = <&gpio3 19 IRQ_TYPE_LEVEL_LOW>;
 	};
 };
 
@@ -468,6 +471,12 @@
 		>;
 	};
 
+	pinctrl_rtc: rtcgrp {
+		fsl,pins = <
+			MX93_PAD_SD2_VSELECT__GPIO3_IO19		0x31e
+		>;
+	};
+
 	pinctrl_sai3: sai3grp {
 		fsl,pins = <
 			MX93_PAD_GPIO_IO20__SAI3_RX_DATA00		0x31e /* I2S_A_DATA_IN */
diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts
index 475913cf0cb9..5599e296919f 100644
--- a/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-nash.dts
@@ -19,14 +19,44 @@
 
 	aliases {
 		ethernet1 = &eqos;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
 		rtc0 = &i2c_rtc;
 		rtc1 = &bbnsm_rtc;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		serial2 = &lpuart3;
+		serial3 = &lpuart4;
+		serial4 = &lpuart5;
+		serial5 = &lpuart6;
+		serial6 = &lpuart7;
+		spi0 = &lpspi1;
+		spi1 = &lpspi2;
+		spi2 = &lpspi3;
+		spi3 = &lpspi4;
+		spi4 = &lpspi5;
+		spi5 = &lpspi6;
 	};
 
 	chosen {
 		stdout-path = &lpuart1;
 	};
 
+	curr_sens: current-sense {
+		compatible = "current-sense-amplifier";
+		#io-channel-cells = <0>;
+		io-channels = <&adc1 1>;
+		sense-gain-div = <2>;
+		sense-gain-mult = <50>;
+		sense-resistor-micro-ohms = <35000>;
+	};
+
 	flexcan1_tc: can-phy0 {
 		compatible = "ti,tcan1042";
 		#phy-cells = <0>;
@@ -36,6 +66,11 @@
 		standby-gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>;
 	};
 
+	iio-hwmon {
+		compatible = "iio-hwmon";
+		io-channels = <&curr_sens 0>;
+	};
+
 	reg_usdhc2_vmmc: regulator-usdhc2 {
 		compatible = "regulator-fixed";
 		gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
index 6f1374f5757f..802d96b19e4c 100644
--- a/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-phyboard-segin.dts
@@ -19,8 +19,17 @@
 
 	aliases {
 		ethernet1 = &eqos;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
 		rtc0 = &i2c_rtc;
 		rtc1 = &bbnsm_rtc;
+		serial0 = &lpuart1;
 	};
 
 	chosen {
diff --git a/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
index c6f5aa38ebf9..3f069905cf0b 100644
--- a/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93-phycore-som.dtsi
@@ -67,7 +67,6 @@
 	pinctrl-0 = <&pinctrl_fec>;
 	phy-mode = "rmii";
 	phy-handle = <&ethphy1>;
-	fsl,magic-packet;
 	assigned-clocks = <&clk IMX93_CLK_ENET_TIMER1>,
 			  <&clk IMX93_CLK_ENET_REF>,
 			  <&clk IMX93_CLK_ENET_REF_PHY>;
@@ -85,6 +84,8 @@
 		ethphy1: ethernet-phy@1 {
 			compatible = "ethernet-phy-ieee802.3-c22";
 			reg = <1>;
+			reset-gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>;
+			reset-assert-us = <30>;
 		};
 	};
 };
@@ -206,14 +207,17 @@
 		fsl,pins = <
 			MX93_PAD_ENET2_MDC__ENET1_MDC			0x50e
 			MX93_PAD_ENET2_MDIO__ENET1_MDIO			0x502
-			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x57e
-			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x57e
-			MX93_PAD_ENET2_RXC__ENET1_RX_ER			0x5fe
+			/* the three pins below are connected to PHYs straps,
+			 * that is what the pull-up/down setting is for.
+			 */
+			MX93_PAD_ENET2_RD0__ENET1_RGMII_RD0		0x37e
+			MX93_PAD_ENET2_RD1__ENET1_RGMII_RD1		0x37e
 			MX93_PAD_ENET2_RX_CTL__ENET1_RGMII_RX_CTL	0x57e
 			MX93_PAD_ENET2_TD0__ENET1_RGMII_TD0		0x50e
 			MX93_PAD_ENET2_TD1__ENET1_RGMII_TD1		0x50e
 			MX93_PAD_ENET2_TX_CTL__ENET1_RGMII_TX_CTL	0x50e
 			MX93_PAD_ENET2_TD2__ENET1_TX_CLK		0x4000050e
+			MX93_PAD_ENET2_RXC__GPIO4_IO23			0x51e
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba91xxca.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba91xxca.dts
index 9dbf41cf394b..2673d9dccbf4 100644
--- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba91xxca.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba91xxca.dts
@@ -27,8 +27,19 @@
 		eeprom0 = &eeprom0;
 		ethernet0 = &eqos;
 		ethernet1 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
 		rtc0 = &pcf85063;
 		rtc1 = &bbnsm_rtc;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
 	};
 
 	backlight: backlight {
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
index 137b8ed242a2..4760d07ea24b 100644
--- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxca.dts
@@ -28,8 +28,33 @@
 		eeprom0 = &eeprom0;
 		ethernet0 = &eqos;
 		ethernet1 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		i2c3 = &lpi2c4;
+		i2c4 = &lpi2c5;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
 		rtc0 = &pcf85063;
 		rtc1 = &bbnsm_rtc;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		serial2 = &lpuart3;
+		serial3 = &lpuart4;
+		serial4 = &lpuart5;
+		serial5 = &lpuart6;
+		serial6 = &lpuart7;
+		serial7 = &lpuart8;
+		spi0 = &lpspi1;
+		spi1 = &lpspi2;
+		spi2 = &lpspi3;
+		spi3 = &lpspi4;
+		spi4 = &lpspi5;
+		spi5 = &lpspi6;
 	};
 
 	backlight_lvds: backlight {
diff --git a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
index 219f49a4f87f..8a88c98ac05a 100644
--- a/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-tqma9352-mba93xxla.dts
@@ -28,8 +28,33 @@
 		eeprom0 = &eeprom0;
 		ethernet0 = &eqos;
 		ethernet1 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		i2c3 = &lpi2c4;
+		i2c4 = &lpi2c5;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
 		rtc0 = &pcf85063;
 		rtc1 = &bbnsm_rtc;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		serial2 = &lpuart3;
+		serial3 = &lpuart4;
+		serial4 = &lpuart5;
+		serial5 = &lpuart6;
+		serial6 = &lpuart7;
+		serial7 = &lpuart8;
+		spi0 = &lpspi1;
+		spi1 = &lpspi2;
+		spi2 = &lpspi3;
+		spi3 = &lpspi4;
+		spi4 = &lpspi5;
+		spi5 = &lpspi6;
 	};
 
 	backlight_lvds: backlight {
diff --git a/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts b/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts
index 576d6982a4a0..c789c1f24bdc 100644
--- a/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts
+++ b/arch/arm64/boot/dts/freescale/imx93-var-som-symphony.dts
@@ -17,8 +17,25 @@
 	aliases {
 		ethernet0 = &eqos;
 		ethernet1 = &fec;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		i2c3 = &lpi2c4;
+		i2c4 = &lpi2c5;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		serial0 = &lpuart1;
+		serial1 = &lpuart2;
+		serial2 = &lpuart3;
+		serial3 = &lpuart4;
+		serial4 = &lpuart5;
+		serial5 = &lpuart6;
 	};
 
+
 	chosen {
 		stdout-path = &lpuart1;
 	};
diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi b/arch/arm64/boot/dts/freescale/imx93.dtsi
index 8a7f1cd76c76..7b27012dfcb5 100644
--- a/arch/arm64/boot/dts/freescale/imx93.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
@@ -1,187 +1,15 @@
 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
 /*
- * Copyright 2022 NXP
+ * Copyright 2022,2025 NXP
  */
 
-#include <dt-bindings/clock/imx93-clock.h>
-#include <dt-bindings/dma/fsl-edma.h>
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
-#include <dt-bindings/power/fsl,imx93-power.h>
-#include <dt-bindings/thermal/thermal.h>
+#include "imx91_93_common.dtsi"
 
-#include "imx93-pinfunc.h"
-
-/ {
-	interrupt-parent = <&gic>;
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	aliases {
-		gpio0 = &gpio1;
-		gpio1 = &gpio2;
-		gpio2 = &gpio3;
-		gpio3 = &gpio4;
-		i2c0 = &lpi2c1;
-		i2c1 = &lpi2c2;
-		i2c2 = &lpi2c3;
-		i2c3 = &lpi2c4;
-		i2c4 = &lpi2c5;
-		i2c5 = &lpi2c6;
-		i2c6 = &lpi2c7;
-		i2c7 = &lpi2c8;
-		mmc0 = &usdhc1;
-		mmc1 = &usdhc2;
-		mmc2 = &usdhc3;
-		serial0 = &lpuart1;
-		serial1 = &lpuart2;
-		serial2 = &lpuart3;
-		serial3 = &lpuart4;
-		serial4 = &lpuart5;
-		serial5 = &lpuart6;
-		serial6 = &lpuart7;
-		serial7 = &lpuart8;
-		spi0 = &lpspi1;
-		spi1 = &lpspi2;
-		spi2 = &lpspi3;
-		spi3 = &lpspi4;
-		spi4 = &lpspi5;
-		spi5 = &lpspi6;
-		spi6 = &lpspi7;
-		spi7 = &lpspi8;
-	};
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		idle-states {
-			entry-method = "psci";
-
-			cpu_pd_wait: cpu-pd-wait {
-				compatible = "arm,idle-state";
-				arm,psci-suspend-param = <0x0010033>;
-				local-timer-stop;
-				entry-latency-us = <10000>;
-				exit-latency-us = <7000>;
-				min-residency-us = <27000>;
-				wakeup-latency-us = <15000>;
-			};
-		};
-
-		A55_0: cpu@0 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a55";
-			reg = <0x0>;
-			enable-method = "psci";
-			#cooling-cells = <2>;
-			cpu-idle-states = <&cpu_pd_wait>;
-			i-cache-size = <32768>;
-			i-cache-line-size = <64>;
-			i-cache-sets = <128>;
-			d-cache-size = <32768>;
-			d-cache-line-size = <64>;
-			d-cache-sets = <128>;
-			next-level-cache = <&l2_cache_l0>;
-		};
-
-		A55_1: cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a55";
-			reg = <0x100>;
-			enable-method = "psci";
-			#cooling-cells = <2>;
-			cpu-idle-states = <&cpu_pd_wait>;
-			i-cache-size = <32768>;
-			i-cache-line-size = <64>;
-			i-cache-sets = <128>;
-			d-cache-size = <32768>;
-			d-cache-line-size = <64>;
-			d-cache-sets = <128>;
-			next-level-cache = <&l2_cache_l1>;
-		};
-
-		l2_cache_l0: l2-cache-l0 {
-			compatible = "cache";
-			cache-size = <65536>;
-			cache-line-size = <64>;
-			cache-sets = <256>;
-			cache-level = <2>;
-			cache-unified;
-			next-level-cache = <&l3_cache>;
-		};
-
-		l2_cache_l1: l2-cache-l1 {
-			compatible = "cache";
-			cache-size = <65536>;
-			cache-line-size = <64>;
-			cache-sets = <256>;
-			cache-level = <2>;
-			cache-unified;
-			next-level-cache = <&l3_cache>;
-		};
-
-		l3_cache: l3-cache {
-			compatible = "cache";
-			cache-size = <262144>;
-			cache-line-size = <64>;
-			cache-sets = <256>;
-			cache-level = <3>;
-			cache-unified;
-		};
-	};
-
-	osc_32k: clock-osc-32k {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <32768>;
-		clock-output-names = "osc_32k";
-	};
-
-	osc_24m: clock-osc-24m {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <24000000>;
-		clock-output-names = "osc_24m";
-	};
-
-	clk_ext1: clock-ext1 {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency = <133000000>;
-		clock-output-names = "clk_ext1";
-	};
-
-	pmu {
-		compatible = "arm,cortex-a55-pmu";
-		interrupts = <GIC_PPI 7 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
-	};
-
-	psci {
-		compatible = "arm,psci-1.0";
-		method = "smc";
-	};
-
-	timer {
-		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>;
-		clock-frequency = <24000000>;
-		arm,no-tick-in-suspend;
-		interrupt-parent = <&gic>;
-	};
-
-	gic: interrupt-controller@48000000 {
-		compatible = "arm,gic-v3";
-		reg = <0 0x48000000 0 0x10000>,
-		      <0 0x48040000 0 0xc0000>;
-		#interrupt-cells = <3>;
-		interrupt-controller;
-		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
-		interrupt-parent = <&gic>;
+/{
+	cm33: remoteproc-cm33 {
+		compatible = "fsl,imx93-cm33";
+		clocks = <&clk IMX93_CLK_CM33_GATE>;
+		status = "disabled";
 	};
 
 	thermal-zones {
@@ -215,1143 +43,119 @@
 			};
 		};
 	};
+};
 
-	cm33: remoteproc-cm33 {
-		compatible = "fsl,imx93-cm33";
-		clocks = <&clk IMX93_CLK_CM33_GATE>;
+&aips1 {
+	mu1: mailbox@44230000 {
+		compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu";
+		reg = <0x44230000 0x10000>;
+		interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk IMX93_CLK_MU1_B_GATE>;
+		#mbox-cells = <2>;
 		status = "disabled";
 	};
 
-	mqs1: mqs1 {
-		compatible = "fsl,imx93-mqs";
-		gpr = <&aonmix_ns_gpr>;
-		status = "disabled";
+	tmu: tmu@44482000 {
+		compatible = "fsl,qoriq-tmu";
+		reg = <0x44482000 0x1000>;
+		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk IMX93_CLK_TMC_GATE>;
+		#thermal-sensor-cells = <1>;
+		little-endian;
+		fsl,tmu-range = <0x800000da 0x800000e9
+				 0x80000102 0x8000012a
+				 0x80000166 0x800001a7
+				 0x800001b6>;
+		fsl,tmu-calibration = <0x00000000 0x0000000e
+				       0x00000001 0x00000029
+				       0x00000002 0x00000056
+				       0x00000003 0x000000a2
+				       0x00000004 0x00000116
+				       0x00000005 0x00000195
+				       0x00000006 0x000001b2>;
 	};
+};
 
-	mqs2: mqs2 {
-		compatible = "fsl,imx93-mqs";
-		gpr = <&wakeupmix_gpr>;
+&aips2 {
+	mu2: mailbox@42440000 {
+		compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu";
+		reg = <0x42440000 0x10000>;
+		interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&clk IMX93_CLK_MU2_B_GATE>;
+		#mbox-cells = <2>;
 		status = "disabled";
 	};
+};
 
-	usbphynop1: usbphynop1 {
-		compatible = "usb-nop-xceiv";
-		#phy-cells = <0>;
-		clocks = <&clk IMX93_CLK_USB_PHY_BURUNIN>;
-		clock-names = "main_clk";
-	};
-
-	usbphynop2: usbphynop2 {
-		compatible = "usb-nop-xceiv";
-		#phy-cells = <0>;
-		clocks = <&clk IMX93_CLK_USB_PHY_BURUNIN>;
-		clock-names = "main_clk";
+&cpus {
+	A55_0: cpu@0 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a55";
+		reg = <0x0>;
+		enable-method = "psci";
+		#cooling-cells = <2>;
+		cpu-idle-states = <&cpu_pd_wait>;
+		i-cache-size = <32768>;
+		i-cache-line-size = <64>;
+		i-cache-sets = <128>;
+		d-cache-size = <32768>;
+		d-cache-line-size = <64>;
+		d-cache-sets = <128>;
+		next-level-cache = <&l2_cache_l0>;
+	};
+
+	A55_1: cpu@100 {
+		device_type = "cpu";
+		compatible = "arm,cortex-a55";
+		reg = <0x100>;
+		enable-method = "psci";
+		#cooling-cells = <2>;
+		cpu-idle-states = <&cpu_pd_wait>;
+		i-cache-size = <32768>;
+		i-cache-line-size = <64>;
+		i-cache-sets = <128>;
+		d-cache-size = <32768>;
+		d-cache-line-size = <64>;
+		d-cache-sets = <128>;
+		next-level-cache = <&l2_cache_l1>;
+	};
+
+	l2_cache_l0: l2-cache-l0 {
+		compatible = "cache";
+		cache-size = <65536>;
+		cache-line-size = <64>;
+		cache-sets = <256>;
+		cache-level = <2>;
+		cache-unified;
+		next-level-cache = <&l3_cache>;
+	};
+
+	l2_cache_l1: l2-cache-l1 {
+		compatible = "cache";
+		cache-size = <65536>;
+		cache-line-size = <64>;
+		cache-sets = <256>;
+		cache-level = <2>;
+		cache-unified;
+		next-level-cache = <&l3_cache>;
+	};
+
+	l3_cache: l3-cache {
+		compatible = "cache";
+		cache-size = <262144>;
+		cache-line-size = <64>;
+		cache-sets = <256>;
+		cache-level = <3>;
+		cache-unified;
 	};
+};
 
-	soc@0 {
-		compatible = "simple-bus";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges = <0x0 0x0 0x0 0x80000000>,
-			 <0x28000000 0x0 0x28000000 0x10000000>;
-
-		aips1: bus@44000000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x44000000 0x800000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			edma1: dma-controller@44000000 {
-				compatible = "fsl,imx93-edma3";
-				reg = <0x44000000 0x200000>;
-				#dma-cells = <3>;
-				dma-channels = <31>;
-				interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>,  //  0: Reserved
-					     <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,  //  1: CANFD1
-					     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,  //  2: Reserved
-					     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,  //  3: GPIO1 CH0
-					     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,  //  4: GPIO1 CH1
-					     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, //  5: I3C1 TO Bus
-					     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, //  6: I3C1 From Bus
-					     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, //  7: LPI2C1 M TX
-					     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, //  8: LPI2C1 S TX
-					     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, //  9: LPI2C2 M RX
-					     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, // 10: LPI2C2 S RX
-					     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, // 11: LPSPI1 TX
-					     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, // 12: LPSPI1 RX
-					     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, // 13: LPSPI2 TX
-					     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, // 14: LPSPI2 RX
-					     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, // 15: LPTMR1
-					     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, // 16: LPUART1 TX
-					     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, // 17: LPUART1 RX
-					     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, // 18: LPUART2 TX
-					     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, // 19: LPUART2 RX
-					     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, // 20: S400
-					     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, // 21: SAI TX
-					     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, // 22: SAI RX
-					     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, // 23: TPM1 CH0/CH2
-					     <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, // 24: TPM1 CH1/CH3
-					     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>, // 25: TPM1 Overflow
-					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, // 26: TMP2 CH0/CH2
-					     <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>, // 27: TMP2 CH1/CH3
-					     <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>, // 28: TMP2 Overflow
-					     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>, // 29: PDM
-					     <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>, // 30: ADC1
-					     <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;  // err
-				clocks = <&clk IMX93_CLK_EDMA1_GATE>;
-				clock-names = "dma";
-			};
-
-			aonmix_ns_gpr: syscon@44210000 {
-				compatible = "fsl,imx93-aonmix-ns-syscfg", "syscon";
-				reg = <0x44210000 0x1000>;
-			};
-
-			mu1: mailbox@44230000 {
-				compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu";
-				reg = <0x44230000 0x10000>;
-				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_MU1_B_GATE>;
-				#mbox-cells = <2>;
-				status = "disabled";
-			};
-
-			system_counter: timer@44290000 {
-				compatible = "nxp,sysctr-timer";
-				reg = <0x44290000 0x30000>;
-				interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&osc_24m>;
-				clock-names = "per";
-				nxp,no-divider;
-			};
-
-			wdog1: watchdog@442d0000 {
-				compatible = "fsl,imx93-wdt";
-				reg = <0x442d0000 0x10000>;
-				interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_WDOG1_GATE>;
-				timeout-sec = <40>;
-				status = "disabled";
-			};
-
-			wdog2: watchdog@442e0000 {
-				compatible = "fsl,imx93-wdt";
-				reg = <0x442e0000 0x10000>;
-				interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_WDOG2_GATE>;
-				timeout-sec = <40>;
-				status = "disabled";
-			};
-
-			tpm1: pwm@44310000 {
-				compatible = "fsl,imx7ulp-pwm";
-				reg = <0x44310000 0x1000>;
-				clocks = <&clk IMX93_CLK_TPM1_GATE>;
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			tpm2: pwm@44320000 {
-				compatible = "fsl,imx7ulp-pwm";
-				reg = <0x44320000 0x10000>;
-				clocks = <&clk IMX93_CLK_TPM2_GATE>;
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			i3c1: i3c@44330000 {
-				compatible = "silvaco,i3c-master-v1";
-				reg = <0x44330000 0x10000>;
-				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <3>;
-				#size-cells = <0>;
-				clocks = <&clk IMX93_CLK_BUS_AON>,
-					 <&clk IMX93_CLK_I3C1_GATE>,
-					 <&clk IMX93_CLK_I3C1_SLOW>;
-				clock-names = "pclk", "fast_clk", "slow_clk";
-				status = "disabled";
-			};
-
-			lpi2c1: i2c@44340000 {
-				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
-				reg = <0x44340000 0x10000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPI2C1_GATE>,
-					 <&clk IMX93_CLK_BUS_AON>;
-				clock-names = "per", "ipg";
-				dmas = <&edma1 7 0 0>, <&edma1 8 0 FSL_EDMA_RX>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			lpi2c2: i2c@44350000 {
-				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
-				reg = <0x44350000 0x10000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPI2C2_GATE>,
-					 <&clk IMX93_CLK_BUS_AON>;
-				clock-names = "per", "ipg";
-				dmas = <&edma1 9 0 0>, <&edma1 10 0 FSL_EDMA_RX>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			lpspi1: spi@44360000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
-				reg = <0x44360000 0x10000>;
-				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPSPI1_GATE>,
-					 <&clk IMX93_CLK_BUS_AON>;
-				clock-names = "per", "ipg";
-				dmas = <&edma1 11 0 0>, <&edma1 12 0 FSL_EDMA_RX>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			lpspi2: spi@44370000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
-				reg = <0x44370000 0x10000>;
-				interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPSPI2_GATE>,
-					 <&clk IMX93_CLK_BUS_AON>;
-				clock-names = "per", "ipg";
-				dmas = <&edma1 13 0 0>, <&edma1 14 0 FSL_EDMA_RX>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			lpuart1: serial@44380000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
-				reg = <0x44380000 0x1000>;
-				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPUART1_GATE>;
-				clock-names = "ipg";
-				dmas = <&edma1 17 0 FSL_EDMA_RX>, <&edma1 16 0 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			lpuart2: serial@44390000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
-				reg = <0x44390000 0x1000>;
-				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPUART2_GATE>;
-				clock-names = "ipg";
-				dmas = <&edma1 19 0 FSL_EDMA_RX>, <&edma1 18 0 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			flexcan1: can@443a0000 {
-				compatible = "fsl,imx93-flexcan";
-				reg = <0x443a0000 0x10000>;
-				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_BUS_AON>,
-					 <&clk IMX93_CLK_CAN1_GATE>;
-				clock-names = "ipg", "per";
-				assigned-clocks = <&clk IMX93_CLK_CAN1>;
-				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
-				assigned-clock-rates = <40000000>;
-				fsl,clk-source = /bits/ 8 <0>;
-				fsl,stop-mode = <&aonmix_ns_gpr 0x14 0>;
-				status = "disabled";
-			};
-
-			sai1: sai@443b0000 {
-				compatible = "fsl,imx93-sai";
-				reg = <0x443b0000 0x10000>;
-				interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_SAI1_IPG>, <&clk IMX93_CLK_DUMMY>,
-					 <&clk IMX93_CLK_SAI1_GATE>, <&clk IMX93_CLK_DUMMY>,
-					 <&clk IMX93_CLK_DUMMY>;
-				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
-				dmas = <&edma1 22 0 FSL_EDMA_RX>, <&edma1 21 0 0>;
-				dma-names = "rx", "tx";
-				#sound-dai-cells = <0>;
-				status = "disabled";
-			};
-
-			iomuxc: pinctrl@443c0000 {
-				compatible = "fsl,imx93-iomuxc";
-				reg = <0x443c0000 0x10000>;
-				status = "okay";
-			};
-
-			bbnsm: bbnsm@44440000 {
-				compatible = "nxp,imx93-bbnsm", "syscon", "simple-mfd";
-				reg = <0x44440000 0x10000>;
-
-				bbnsm_rtc: rtc {
-					compatible = "nxp,imx93-bbnsm-rtc";
-					interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-				};
-
-				bbnsm_pwrkey: pwrkey {
-					compatible = "nxp,imx93-bbnsm-pwrkey";
-					interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
-					linux,code = <KEY_POWER>;
-				};
-			};
-
-			clk: clock-controller@44450000 {
-				compatible = "fsl,imx93-ccm";
-				reg = <0x44450000 0x10000>;
-				#clock-cells = <1>;
-				clocks = <&osc_32k>, <&osc_24m>, <&clk_ext1>;
-				clock-names = "osc_32k", "osc_24m", "clk_ext1";
-				assigned-clocks = <&clk IMX93_CLK_AUDIO_PLL>;
-				assigned-clock-rates = <393216000>;
-				status = "okay";
-			};
-
-			src: system-controller@44460000 {
-				compatible = "fsl,imx93-src", "syscon";
-				reg = <0x44460000 0x10000>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges;
-
-				mlmix: power-domain@44461800 {
-					compatible = "fsl,imx93-src-slice";
-					reg = <0x44461800 0x400>, <0x44464800 0x400>;
-					#power-domain-cells = <0>;
-					clocks = <&clk IMX93_CLK_ML_APB>,
-						 <&clk IMX93_CLK_ML>;
-				};
-
-				mediamix: power-domain@44462400 {
-					compatible = "fsl,imx93-src-slice";
-					reg = <0x44462400 0x400>, <0x44465800 0x400>;
-					#power-domain-cells = <0>;
-					clocks = <&clk IMX93_CLK_NIC_MEDIA_GATE>,
-						 <&clk IMX93_CLK_MEDIA_APB>;
-				};
-			};
-
-			clock-controller@44480000 {
-				compatible = "fsl,imx93-anatop";
-				reg = <0x44480000 0x2000>;
-				#clock-cells = <1>;
-			};
-
-			tmu: tmu@44482000 {
-				compatible = "fsl,qoriq-tmu";
-				reg = <0x44482000 0x1000>;
-				interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_TMC_GATE>;
-				little-endian;
-				fsl,tmu-range = <0x800000da 0x800000e9
-						 0x80000102 0x8000012a
-						 0x80000166 0x800001a7
-						 0x800001b6>;
-				fsl,tmu-calibration = <0x00000000 0x0000000e
-						       0x00000001 0x00000029
-						       0x00000002 0x00000056
-						       0x00000003 0x000000a2
-						       0x00000004 0x00000116
-						       0x00000005 0x00000195
-						       0x00000006 0x000001b2>;
-				#thermal-sensor-cells = <1>;
-			};
-
-			micfil: micfil@44520000 {
-				compatible = "fsl,imx93-micfil";
-				reg = <0x44520000 0x10000>;
-				interrupts = <GIC_SPI 202 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 201 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_PDM_IPG>,
-					 <&clk IMX93_CLK_PDM_GATE>,
-					 <&clk IMX93_CLK_AUDIO_PLL>;
-				clock-names = "ipg_clk", "ipg_clk_app", "pll8k";
-				dmas = <&edma1 29 0 5>;
-				dma-names = "rx";
-				#sound-dai-cells = <0>;
-				status = "disabled";
-			};
-
-			adc1: adc@44530000 {
-				compatible = "nxp,imx93-adc";
-				reg = <0x44530000 0x10000>;
-				interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_ADC1_GATE>;
-				clock-names = "ipg";
-				#io-channel-cells = <1>;
-				status = "disabled";
-			};
-		};
-
-		aips2: bus@42000000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x42000000 0x800000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			edma2: dma-controller@42000000 {
-				compatible = "fsl,imx93-edma4";
-				reg = <0x42000000 0x210000>;
-				#dma-cells = <3>;
-				dma-channels = <64>;
-				interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_EDMA2_GATE>;
-				clock-names = "dma";
-			};
-
-			wakeupmix_gpr: syscon@42420000 {
-				compatible = "fsl,imx93-wakeupmix-syscfg", "syscon";
-				reg = <0x42420000 0x1000>;
-			};
-
-			mu2: mailbox@42440000 {
-				compatible = "fsl,imx93-mu", "fsl,imx8ulp-mu";
-				reg = <0x42440000 0x10000>;
-				interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_MU2_B_GATE>;
-				#mbox-cells = <2>;
-				status = "disabled";
-			};
-
-			wdog3: watchdog@42490000 {
-				compatible = "fsl,imx93-wdt";
-				reg = <0x42490000 0x10000>;
-				interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_WDOG3_GATE>;
-				timeout-sec = <40>;
-				status = "disabled";
-			};
-
-			wdog4: watchdog@424a0000 {
-				compatible = "fsl,imx93-wdt";
-				reg = <0x424a0000 0x10000>;
-				interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_WDOG4_GATE>;
-				timeout-sec = <40>;
-				status = "disabled";
-			};
-
-			wdog5: watchdog@424b0000 {
-				compatible = "fsl,imx93-wdt";
-				reg = <0x424b0000 0x10000>;
-				interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_WDOG5_GATE>;
-				timeout-sec = <40>;
-				status = "disabled";
-			};
-
-			tpm3: pwm@424e0000 {
-				compatible = "fsl,imx7ulp-pwm";
-				reg = <0x424e0000 0x1000>;
-				clocks = <&clk IMX93_CLK_TPM3_GATE>;
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			tpm4: pwm@424f0000 {
-				compatible = "fsl,imx7ulp-pwm";
-				reg = <0x424f0000 0x10000>;
-				clocks = <&clk IMX93_CLK_TPM4_GATE>;
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			tpm5: pwm@42500000 {
-				compatible = "fsl,imx7ulp-pwm";
-				reg = <0x42500000 0x10000>;
-				clocks = <&clk IMX93_CLK_TPM5_GATE>;
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			tpm6: pwm@42510000 {
-				compatible = "fsl,imx7ulp-pwm";
-				reg = <0x42510000 0x10000>;
-				clocks = <&clk IMX93_CLK_TPM6_GATE>;
-				#pwm-cells = <3>;
-				status = "disabled";
-			};
-
-			i3c2: i3c@42520000 {
-				compatible = "silvaco,i3c-master-v1";
-				reg = <0x42520000 0x10000>;
-				interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
-				#address-cells = <3>;
-				#size-cells = <0>;
-				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
-					 <&clk IMX93_CLK_I3C2_GATE>,
-					 <&clk IMX93_CLK_I3C2_SLOW>;
-				clock-names = "pclk", "fast_clk", "slow_clk";
-				status = "disabled";
-			};
-
-			lpi2c3: i2c@42530000 {
-				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
-				reg = <0x42530000 0x10000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPI2C3_GATE>,
-					 <&clk IMX93_CLK_BUS_WAKEUP>;
-				clock-names = "per", "ipg";
-				dmas = <&edma2 8 0 0>, <&edma2 9 0 FSL_EDMA_RX>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			lpi2c4: i2c@42540000 {
-				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
-				reg = <0x42540000 0x10000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPI2C4_GATE>,
-					 <&clk IMX93_CLK_BUS_WAKEUP>;
-				clock-names = "per", "ipg";
-				dmas = <&edma2 10 0 0>, <&edma2 11 0 FSL_EDMA_RX>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			lpspi3: spi@42550000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
-				reg = <0x42550000 0x10000>;
-				interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPSPI3_GATE>,
-					 <&clk IMX93_CLK_BUS_WAKEUP>;
-				clock-names = "per", "ipg";
-				dmas = <&edma2 12 0 0>, <&edma2 13 0 FSL_EDMA_RX>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			lpspi4: spi@42560000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
-				reg = <0x42560000 0x10000>;
-				interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPSPI4_GATE>,
-					 <&clk IMX93_CLK_BUS_WAKEUP>;
-				clock-names = "per", "ipg";
-				dmas = <&edma2 14 0 0>, <&edma2 15 0 FSL_EDMA_RX>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			lpuart3: serial@42570000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
-				reg = <0x42570000 0x1000>;
-				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPUART3_GATE>;
-				clock-names = "ipg";
-				dmas = <&edma2 18 0 FSL_EDMA_RX>, <&edma2 17 0 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			lpuart4: serial@42580000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
-				reg = <0x42580000 0x1000>;
-				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPUART4_GATE>;
-				clock-names = "ipg";
-				dmas = <&edma2 20 0 FSL_EDMA_RX>, <&edma2 19 0 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			lpuart5: serial@42590000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
-				reg = <0x42590000 0x1000>;
-				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPUART5_GATE>;
-				clock-names = "ipg";
-				dmas = <&edma2 22 0 FSL_EDMA_RX>, <&edma2 21 0 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			lpuart6: serial@425a0000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
-				reg = <0x425a0000 0x1000>;
-				interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPUART6_GATE>;
-				clock-names = "ipg";
-				dmas = <&edma2 24 0 FSL_EDMA_RX>, <&edma2 23 0 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			flexcan2: can@425b0000 {
-				compatible = "fsl,imx93-flexcan";
-				reg = <0x425b0000 0x10000>;
-				interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
-					 <&clk IMX93_CLK_CAN2_GATE>;
-				clock-names = "ipg", "per";
-				assigned-clocks = <&clk IMX93_CLK_CAN2>;
-				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
-				assigned-clock-rates = <40000000>;
-				fsl,clk-source = /bits/ 8 <0>;
-				fsl,stop-mode = <&wakeupmix_gpr 0x0c 2>;
-				status = "disabled";
-			};
-
-			flexspi1: spi@425e0000 {
-				compatible = "nxp,imx8mm-fspi";
-				reg = <0x425e0000 0x10000>, <0x28000000 0x10000000>;
-				reg-names = "fspi_base", "fspi_mmap";
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_FLEXSPI1_GATE>,
-					 <&clk IMX93_CLK_FLEXSPI1_GATE>;
-				clock-names = "fspi_en", "fspi";
-				assigned-clocks = <&clk IMX93_CLK_FLEXSPI1>;
-				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
-				status = "disabled";
-			};
-
-			sai2: sai@42650000 {
-				compatible = "fsl,imx93-sai";
-				reg = <0x42650000 0x10000>;
-				interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_SAI2_IPG>, <&clk IMX93_CLK_DUMMY>,
-					 <&clk IMX93_CLK_SAI2_GATE>, <&clk IMX93_CLK_DUMMY>,
-					 <&clk IMX93_CLK_DUMMY>;
-				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
-				dmas = <&edma2 59 0 FSL_EDMA_RX>, <&edma2 58 0 0>;
-				dma-names = "rx", "tx";
-				#sound-dai-cells = <0>;
-				status = "disabled";
-			};
-
-			sai3: sai@42660000 {
-				compatible = "fsl,imx93-sai";
-				reg = <0x42660000 0x10000>;
-				interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_SAI3_IPG>, <&clk IMX93_CLK_DUMMY>,
-					 <&clk IMX93_CLK_SAI3_GATE>, <&clk IMX93_CLK_DUMMY>,
-					 <&clk IMX93_CLK_DUMMY>;
-				clock-names = "bus", "mclk0", "mclk1", "mclk2", "mclk3";
-				dmas = <&edma2 61 0 FSL_EDMA_RX>, <&edma2 60 0 0>;
-				dma-names = "rx", "tx";
-				#sound-dai-cells = <0>;
-				status = "disabled";
-			};
-
-			xcvr: xcvr@42680000 {
-				compatible = "fsl,imx93-xcvr";
-				reg = <0x42680000 0x800>,
-				      <0x42680800 0x400>,
-				      <0x42680c00 0x080>,
-				      <0x42680e00 0x080>;
-				reg-names = "ram", "regs", "rxfifo", "txfifo";
-				interrupts = <GIC_SPI 203 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_SPDIF_IPG>,
-					 <&clk IMX93_CLK_SPDIF_GATE>,
-					 <&clk IMX93_CLK_DUMMY>,
-					 <&clk IMX93_CLK_AUD_XCVR_GATE>;
-				clock-names = "ipg", "phy", "spba", "pll_ipg";
-				dmas = <&edma2 65 0 FSL_EDMA_RX>, <&edma2 66 0 0>;
-				dma-names = "rx", "tx";
-				#sound-dai-cells = <0>;
-				status = "disabled";
-			};
-
-			lpuart7: serial@42690000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
-				reg = <0x42690000 0x1000>;
-				interrupts = <GIC_SPI 210 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPUART7_GATE>;
-				clock-names = "ipg";
-				dmas = <&edma2 88 0 FSL_EDMA_RX>, <&edma2 87 0 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			lpuart8: serial@426a0000 {
-				compatible = "fsl,imx93-lpuart", "fsl,imx8ulp-lpuart", "fsl,imx7ulp-lpuart";
-				reg = <0x426a0000 0x1000>;
-				interrupts = <GIC_SPI 211 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPUART8_GATE>;
-				clock-names = "ipg";
-				dmas = <&edma2 90 0 FSL_EDMA_RX>, <&edma2 89 0 0>;
-				dma-names = "rx", "tx";
-				status = "disabled";
-			};
-
-			lpi2c5: i2c@426b0000 {
-				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
-				reg = <0x426b0000 0x10000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPI2C5_GATE>,
-					 <&clk IMX93_CLK_BUS_WAKEUP>;
-				clock-names = "per", "ipg";
-				dmas = <&edma2 71 0 0>, <&edma2 72 0 FSL_EDMA_RX>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			lpi2c6: i2c@426c0000 {
-				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
-				reg = <0x426c0000 0x10000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPI2C6_GATE>,
-					 <&clk IMX93_CLK_BUS_WAKEUP>;
-				clock-names = "per", "ipg";
-				dmas = <&edma2 73 0 0>, <&edma2 74 0 FSL_EDMA_RX>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			lpi2c7: i2c@426d0000 {
-				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
-				reg = <0x426d0000 0x10000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPI2C7_GATE>,
-					 <&clk IMX93_CLK_BUS_WAKEUP>;
-				clock-names = "per", "ipg";
-				dmas = <&edma2 75 0 0>, <&edma2 76 0 FSL_EDMA_RX>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			lpi2c8: i2c@426e0000 {
-				compatible = "fsl,imx93-lpi2c", "fsl,imx7ulp-lpi2c";
-				reg = <0x426e0000 0x10000>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPI2C8_GATE>,
-					 <&clk IMX93_CLK_BUS_WAKEUP>;
-				clock-names = "per", "ipg";
-				dmas = <&edma2 77 0 0>, <&edma2 78 0 FSL_EDMA_RX>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			lpspi5: spi@426f0000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
-				reg = <0x426f0000 0x10000>;
-				interrupts = <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPSPI5_GATE>,
-					 <&clk IMX93_CLK_BUS_WAKEUP>;
-				clock-names = "per", "ipg";
-				dmas = <&edma2 79 0 0>, <&edma2 80 0 FSL_EDMA_RX>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			lpspi6: spi@42700000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
-				reg = <0x42700000 0x10000>;
-				interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPSPI6_GATE>,
-					 <&clk IMX93_CLK_BUS_WAKEUP>;
-				clock-names = "per", "ipg";
-				dmas = <&edma2 81 0 0>, <&edma2 82 0 FSL_EDMA_RX>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			lpspi7: spi@42710000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
-				reg = <0x42710000 0x10000>;
-				interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPSPI7_GATE>,
-					 <&clk IMX93_CLK_BUS_WAKEUP>;
-				clock-names = "per", "ipg";
-				dmas = <&edma2 83 0 0>, <&edma2 84 0 FSL_EDMA_RX>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-			lpspi8: spi@42720000 {
-				#address-cells = <1>;
-				#size-cells = <0>;
-				compatible = "fsl,imx93-spi", "fsl,imx7ulp-spi";
-				reg = <0x42720000 0x10000>;
-				interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_LPSPI8_GATE>,
-					 <&clk IMX93_CLK_BUS_WAKEUP>;
-				clock-names = "per", "ipg";
-				dmas = <&edma2 85 0 0>, <&edma2 86 0 FSL_EDMA_RX>;
-				dma-names = "tx", "rx";
-				status = "disabled";
-			};
-
-		};
-
-		aips3: bus@42800000 {
-			compatible = "fsl,aips-bus", "simple-bus";
-			reg = <0x42800000 0x800000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-
-			usdhc1: mmc@42850000 {
-				compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
-				reg = <0x42850000 0x10000>;
-				interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
-					 <&clk IMX93_CLK_WAKEUP_AXI>,
-					 <&clk IMX93_CLK_USDHC1_GATE>;
-				clock-names = "ipg", "ahb", "per";
-				assigned-clocks = <&clk IMX93_CLK_USDHC1>;
-				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
-				assigned-clock-rates = <400000000>;
-				bus-width = <8>;
-				fsl,tuning-start-tap = <1>;
-				fsl,tuning-step = <2>;
-				status = "disabled";
-			};
-
-			usdhc2: mmc@42860000 {
-				compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
-				reg = <0x42860000 0x10000>;
-				interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
-					 <&clk IMX93_CLK_WAKEUP_AXI>,
-					 <&clk IMX93_CLK_USDHC2_GATE>;
-				clock-names = "ipg", "ahb", "per";
-				assigned-clocks = <&clk IMX93_CLK_USDHC2>;
-				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
-				assigned-clock-rates = <400000000>;
-				bus-width = <4>;
-				fsl,tuning-start-tap = <1>;
-				fsl,tuning-step = <2>;
-				status = "disabled";
-			};
-
-			fec: ethernet@42890000 {
-				compatible = "fsl,imx93-fec", "fsl,imx8mq-fec", "fsl,imx6sx-fec";
-				reg = <0x42890000 0x10000>;
-				interrupts = <GIC_SPI 179 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 180 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_ENET1_GATE>,
-					 <&clk IMX93_CLK_ENET1_GATE>,
-					 <&clk IMX93_CLK_ENET_TIMER1>,
-					 <&clk IMX93_CLK_ENET_REF>,
-					 <&clk IMX93_CLK_ENET_REF_PHY>;
-				clock-names = "ipg", "ahb", "ptp",
-					      "enet_clk_ref", "enet_out";
-				assigned-clocks = <&clk IMX93_CLK_ENET_TIMER1>,
-						  <&clk IMX93_CLK_ENET_REF>,
-						  <&clk IMX93_CLK_ENET_REF_PHY>;
-				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
-							 <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>,
-							 <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
-				assigned-clock-rates = <100000000>, <250000000>, <50000000>;
-				fsl,num-tx-queues = <3>;
-				fsl,num-rx-queues = <3>;
-				fsl,stop-mode = <&wakeupmix_gpr 0x0c 1>;
-				nvmem-cells = <&eth_mac1>;
-				nvmem-cell-names = "mac-address";
-				status = "disabled";
-			};
-
-			eqos: ethernet@428a0000 {
-				compatible = "nxp,imx93-dwmac-eqos", "snps,dwmac-5.10a";
-				reg = <0x428a0000 0x10000>;
-				interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>;
-				interrupt-names = "macirq", "eth_wake_irq";
-				clocks = <&clk IMX93_CLK_ENET_QOS_GATE>,
-					 <&clk IMX93_CLK_ENET_QOS_GATE>,
-					 <&clk IMX93_CLK_ENET_TIMER2>,
-					 <&clk IMX93_CLK_ENET>,
-					 <&clk IMX93_CLK_ENET_QOS_GATE>;
-				clock-names = "stmmaceth", "pclk", "ptp_ref", "tx", "mem";
-				assigned-clocks = <&clk IMX93_CLK_ENET_TIMER2>,
-						  <&clk IMX93_CLK_ENET>;
-				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>,
-							 <&clk IMX93_CLK_SYS_PLL_PFD0_DIV2>;
-				assigned-clock-rates = <100000000>, <250000000>;
-				intf_mode = <&wakeupmix_gpr 0x28>;
-				snps,clk-csr = <6>;
-				nvmem-cells = <&eth_mac2>;
-				nvmem-cell-names = "mac-address";
-				status = "disabled";
-			};
-
-			usdhc3: mmc@428b0000 {
-				compatible = "fsl,imx93-usdhc", "fsl,imx8mm-usdhc";
-				reg = <0x428b0000 0x10000>;
-				interrupts = <GIC_SPI 205 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX93_CLK_BUS_WAKEUP>,
-					 <&clk IMX93_CLK_WAKEUP_AXI>,
-					 <&clk IMX93_CLK_USDHC3_GATE>;
-				clock-names = "ipg", "ahb", "per";
-				assigned-clocks = <&clk IMX93_CLK_USDHC3>;
-				assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1>;
-				assigned-clock-rates = <400000000>;
-				bus-width = <4>;
-				fsl,tuning-start-tap = <1>;
-				fsl,tuning-step = <2>;
-				status = "disabled";
-			};
-		};
-
-		gpio2: gpio@43810000 {
-			compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
-			reg = <0x43810000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clk IMX93_CLK_GPIO2_GATE>,
-				 <&clk IMX93_CLK_GPIO2_GATE>;
-			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc 0 4 30>;
-			ngpios = <30>;
-		};
-
-		gpio3: gpio@43820000 {
-			compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
-			reg = <0x43820000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clk IMX93_CLK_GPIO3_GATE>,
-				 <&clk IMX93_CLK_GPIO3_GATE>;
-			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc 0 84 8>, <&iomuxc 8 66 18>,
-				      <&iomuxc 26 34 2>, <&iomuxc 28 0 4>;
-			ngpios = <32>;
-		};
-
-		gpio4: gpio@43830000 {
-			compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
-			reg = <0x43830000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupts = <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clk IMX93_CLK_GPIO4_GATE>,
-				 <&clk IMX93_CLK_GPIO4_GATE>;
-			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc 0 38 28>, <&iomuxc 28 36 2>;
-			ngpios = <30>;
-		};
-
-		gpio1: gpio@47400000 {
-			compatible = "fsl,imx93-gpio", "fsl,imx8ulp-gpio";
-			reg = <0x47400000 0x1000>;
-			gpio-controller;
-			#gpio-cells = <2>;
-			interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			clocks = <&clk IMX93_CLK_GPIO1_GATE>,
-				 <&clk IMX93_CLK_GPIO1_GATE>;
-			clock-names = "gpio", "port";
-			gpio-ranges = <&iomuxc 0 92 16>;
-			ngpios = <16>;
-		};
-
-		ocotp: efuse@47510000 {
-			compatible = "fsl,imx93-ocotp", "syscon";
-			reg = <0x47510000 0x10000>;
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			eth_mac1: mac-address@4ec {
-				reg = <0x4ec 0x6>;
-			};
-
-			eth_mac2: mac-address@4f2 {
-				reg = <0x4f2 0x6>;
-			};
-
-		};
-
-		s4muap: mailbox@47520000 {
-			compatible = "fsl,imx93-mu-s4";
-			reg = <0x47520000 0x10000>;
-			interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "tx", "rx";
-			#mbox-cells = <2>;
-		};
-
-		media_blk_ctrl: system-controller@4ac10000 {
-			compatible = "fsl,imx93-media-blk-ctrl", "syscon";
-			reg = <0x4ac10000 0x10000>;
-			power-domains = <&mediamix>;
-			clocks = <&clk IMX93_CLK_MEDIA_APB>,
-				 <&clk IMX93_CLK_MEDIA_AXI>,
-				 <&clk IMX93_CLK_NIC_MEDIA_GATE>,
-				 <&clk IMX93_CLK_MEDIA_DISP_PIX>,
-				 <&clk IMX93_CLK_CAM_PIX>,
-				 <&clk IMX93_CLK_PXP_GATE>,
-				 <&clk IMX93_CLK_LCDIF_GATE>,
-				 <&clk IMX93_CLK_ISI_GATE>,
-				 <&clk IMX93_CLK_MIPI_CSI_GATE>,
-				 <&clk IMX93_CLK_MIPI_DSI_GATE>;
-			clock-names = "apb", "axi", "nic", "disp", "cam",
-				      "pxp", "lcdif", "isi", "csi", "dsi";
-			#power-domain-cells = <1>;
-			status = "disabled";
-		};
-
-		usbotg1: usb@4c100000 {
-			compatible = "fsl,imx93-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
-			reg = <0x4c100000 0x200>;
-			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk IMX93_CLK_USB_CONTROLLER_GATE>,
-				 <&clk IMX93_CLK_HSIO_32K_GATE>;
-			clock-names = "usb_ctrl_root", "usb_wakeup";
-			assigned-clocks = <&clk IMX93_CLK_HSIO>;
-			assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
-			assigned-clock-rates = <133000000>;
-			phys = <&usbphynop1>;
-			fsl,usbmisc = <&usbmisc1 0>;
-			status = "disabled";
-		};
-
-		usbmisc1: usbmisc@4c100200 {
-			compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc",
-				     "fsl,imx6q-usbmisc";
-			reg = <0x4c100200 0x200>;
-			#index-cells = <1>;
-		};
-
-		usbotg2: usb@4c200000 {
-			compatible = "fsl,imx93-usb", "fsl,imx7d-usb", "fsl,imx27-usb";
-			reg = <0x4c200000 0x200>;
-			interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>;
-			clocks = <&clk IMX93_CLK_USB_CONTROLLER_GATE>,
-				 <&clk IMX93_CLK_HSIO_32K_GATE>;
-			clock-names = "usb_ctrl_root", "usb_wakeup";
-			assigned-clocks = <&clk IMX93_CLK_HSIO>;
-			assigned-clock-parents = <&clk IMX93_CLK_SYS_PLL_PFD1_DIV2>;
-			assigned-clock-rates = <133000000>;
-			phys = <&usbphynop2>;
-			fsl,usbmisc = <&usbmisc2 0>;
-			status = "disabled";
-		};
-
-		usbmisc2: usbmisc@4c200200 {
-			compatible = "fsl,imx8mm-usbmisc", "fsl,imx7d-usbmisc",
-				     "fsl,imx6q-usbmisc";
-			reg = <0x4c200200 0x200>;
-			#index-cells = <1>;
-		};
-
-		memory-controller@4e300000 {
-			compatible = "nxp,imx9-memory-controller";
-			reg = <0x4e300000 0x800>, <0x4e301000 0x1000>;
-			reg-names = "ctrl", "inject";
-			interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
-			little-endian;
-		};
-
-		ddr-pmu@4e300dc0 {
-			compatible = "fsl,imx93-ddr-pmu";
-			reg = <0x4e300dc0 0x200>;
-			interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
-		};
+&src {
+	mlmix: power-domain@44461800 {
+		compatible = "fsl,imx93-src-slice";
+		reg = <0x44461800 0x400>, <0x44464800 0x400>;
+		clocks = <&clk IMX93_CLK_ML_APB>,
+			 <&clk IMX93_CLK_ML>;
+		#power-domain-cells = <0>;
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx94.dtsi b/arch/arm64/boot/dts/freescale/imx94.dtsi
index 44dee2cbd42d..d4a880496b0e 100644
--- a/arch/arm64/boot/dts/freescale/imx94.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx94.dtsi
@@ -212,7 +212,8 @@
 						      <&a55_irqsteer 88>, <&a55_irqsteer 89>,
 						      <&a55_irqsteer 90>, <&a55_irqsteer 91>,
 						      <&a55_irqsteer 92>, <&a55_irqsteer 93>,
-						      <&a55_irqsteer 94>, <&a55_irqsteer 95>;
+						      <&a55_irqsteer 94>, <&a55_irqsteer 95>,
+						      <&gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
 			};
 
 			mu10: mailbox@42430000 {
@@ -619,7 +620,8 @@
 						      <&a55_irqsteer 216>, <&a55_irqsteer 217>,
 						      <&a55_irqsteer 218>, <&a55_irqsteer 219>,
 						      <&a55_irqsteer 220>, <&a55_irqsteer 221>,
-						      <&a55_irqsteer 222>, <&a55_irqsteer 223>;
+						      <&a55_irqsteer 222>, <&a55_irqsteer 223>,
+						      <&gic GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>;
 			};
 		};
 
diff --git a/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts b/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts
index 46f6e0fbf2b0..148243470dd4 100644
--- a/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx95-15x15-evk.dts
@@ -28,7 +28,24 @@
 	aliases {
 		ethernet0 = &enetc_port0;
 		ethernet1 = &enetc_port1;
+		gpio0 = &gpio1;
+		gpio1 = &gpio2;
+		gpio2 = &gpio3;
+		gpio3 = &gpio4;
+		gpio4 = &gpio5;
+		i2c0 = &lpi2c1;
+		i2c1 = &lpi2c2;
+		i2c2 = &lpi2c3;
+		i2c3 = &lpi2c4;
+		i2c4 = &lpi2c5;
+		i2c5 = &lpi2c6;
+		i2c6 = &lpi2c7;
+		i2c7 = &lpi2c8;
+		mmc0 = &usdhc1;
+		mmc1 = &usdhc2;
+		mmc2 = &usdhc3;
 		serial0 = &lpuart1;
+		serial4 = &lpuart5;
 	};
 
 	bt_sco_codec: bt-sco-codec {
@@ -864,12 +881,12 @@
 
 	pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
 		fsl,pins = <
-			IMX95_PAD_SD2_CLK__USDHC2_CLK				0x15fe
-			IMX95_PAD_SD2_CMD__USDHC2_CMD				0x13fe
-			IMX95_PAD_SD2_DATA0__USDHC2_DATA0			0x13fe
-			IMX95_PAD_SD2_DATA1__USDHC2_DATA1			0x13fe
-			IMX95_PAD_SD2_DATA2__USDHC2_DATA2			0x13fe
-			IMX95_PAD_SD2_DATA3__USDHC2_DATA3			0x13fe
+			IMX95_PAD_SD2_CLK__USDHC2_CLK				0x158e
+			IMX95_PAD_SD2_CMD__USDHC2_CMD				0x138e
+			IMX95_PAD_SD2_DATA0__USDHC2_DATA0			0x138e
+			IMX95_PAD_SD2_DATA1__USDHC2_DATA1			0x138e
+			IMX95_PAD_SD2_DATA2__USDHC2_DATA2			0x138e
+			IMX95_PAD_SD2_DATA3__USDHC2_DATA3			0x138e
 			IMX95_PAD_SD2_VSELECT__USDHC2_VSELECT			0x51e
 		>;
 	};
@@ -1082,6 +1099,7 @@
 	fsl,phy-pcs-tx-swing-full-percent = <100>;
 	fsl,phy-tx-preemp-amp-tune-microamp = <600>;
 	fsl,phy-tx-vboost-level-microvolt = <1156>;
+	fsl,phy-tx-vref-tune-percent = <100>;
 	status = "okay";
 
 	port {
diff --git a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
index 2f949a0d48d2..9f968feccef6 100644
--- a/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx95-19x19-evk.dts
@@ -40,6 +40,7 @@
 		mmc0 = &usdhc1;
 		mmc1 = &usdhc2;
 		serial0 = &lpuart1;
+		serial4 = &lpuart5;
 	};
 
 	bt_sco_codec: audio-codec-bt-sco {
@@ -80,17 +81,17 @@
 	flexcan1_phy: can-phy0 {
 		compatible = "nxp,tjr1443";
 		#phy-cells = <0>;
-		max-bitrate = <1000000>;
+		max-bitrate = <8000000>;
 		enable-gpios = <&i2c6_pcal6416 6 GPIO_ACTIVE_HIGH>;
-		standby-gpios = <&i2c6_pcal6416 5 GPIO_ACTIVE_HIGH>;
+		standby-gpios = <&i2c6_pcal6416 5 GPIO_ACTIVE_LOW>;
 	};
 
 	flexcan2_phy: can-phy1 {
 		compatible = "nxp,tjr1443";
 		#phy-cells = <0>;
-		max-bitrate = <1000000>;
-		enable-gpios = <&i2c6_pcal6416 4 GPIO_ACTIVE_HIGH>;
-		standby-gpios = <&i2c6_pcal6416 3 GPIO_ACTIVE_HIGH>;
+		max-bitrate = <8000000>;
+		enable-gpios = <&i2c4_gpio_expander_21 4 GPIO_ACTIVE_HIGH>;
+		standby-gpios = <&i2c4_gpio_expander_21 3 GPIO_ACTIVE_LOW>;
 	};
 
 	reg_vref_1v8: regulator-1p8v {
@@ -135,6 +136,13 @@
 		regulator-max-microvolt = <3300000>;
 		gpio = <&i2c7_pcal6524 20 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
+		/*
+		 * M.2 device only can be enabled(W_DISABLE1#) after all Power
+		 * Rails reach their minimum operating voltage (PCI Express M.2
+		 * Specification r5.1 3.1.4 Power-up Timing).
+		 * Set a delay equal to the max value of Tsettle here.
+		 */
+		startup-delay-us = <5000>;
 	};
 
 	reg_pcie0: regulator-pcie {
@@ -216,7 +224,7 @@
 		model = "wm8962-audio";
 		audio-cpu = <&sai3>;
 		audio-codec = <&wm8962>;
-		hp-det-gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
+		hp-det-gpios = <&gpio2 11 GPIO_ACTIVE_HIGH>;
 		audio-routing = "Headphone Jack", "HPOUTL",
 				"Headphone Jack", "HPOUTR",
 				"Ext Spk", "SPKOUTL",
@@ -302,6 +310,19 @@
 		reg = <0x20>;
 		vcc-supply = <&reg_3p3v>;
 	};
+
+	pca9632: pca9632@62 {
+		compatible = "nxp,pca9632";
+		reg = <0x62>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led_baclklight: led@0 {
+			reg = <0>;
+			label = "backlight";
+			linux,default-trigger = "none";
+		};
+	};
 };
 
 &lpi2c4 {
@@ -622,6 +643,7 @@
 	fsl,phy-pcs-tx-swing-full-percent = <100>;
 	fsl,phy-tx-preemp-amp-tune-microamp = <600>;
 	fsl,phy-tx-vboost-level-microvolt = <1156>;
+	fsl,phy-tx-vref-tune-percent = <100>;
 	orientation-switch;
 	status = "okay";
 
@@ -671,7 +693,7 @@
 };
 
 &scmi_iomuxc {
-	pinctrl_emdio: emdiogrp{
+	pinctrl_emdio: emdiogrp {
 		fsl,pins = <
 			IMX95_PAD_ENET1_MDC__NETCMIX_TOP_NETC_MDC		0x50e
 			IMX95_PAD_ENET1_MDIO__NETCMIX_TOP_NETC_MDIO		0x90e
@@ -1037,6 +1059,79 @@
 			};
 		};
 	};
+
+	pf09-thermal {
+		polling-delay = <2000>;
+		polling-delay-passive = <250>;
+		thermal-sensors = <&scmi_sensor 2>;
+
+		trips {
+			pf09_alert: trip0 {
+				hysteresis = <2000>;
+				temperature = <140000>;
+				type = "passive";
+			};
+
+			pf09_crit: trip1 {
+				hysteresis = <2000>;
+				temperature = <155000>;
+				type = "critical";
+			};
+		};
+	};
+
+	pf53arm-thermal {
+		polling-delay = <2000>;
+		polling-delay-passive = <250>;
+		thermal-sensors = <&scmi_sensor 4>;
+
+		cooling-maps {
+			map0 {
+				trip = <&pf5301_alert>;
+				cooling-device =
+					<&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A55_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A55_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A55_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A55_4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+					<&A55_5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+			};
+		};
+
+		trips {
+			pf5301_alert: trip0 {
+				hysteresis = <2000>;
+				temperature = <140000>;
+				type = "passive";
+			};
+
+			pf5301_crit: trip1 {
+				hysteresis = <2000>;
+				temperature = <155000>;
+				type = "critical";
+			};
+		};
+	};
+
+	pf53soc-thermal {
+		polling-delay = <2000>;
+		polling-delay-passive = <250>;
+		thermal-sensors = <&scmi_sensor 3>;
+
+		trips {
+			pf5302_alert: trip0 {
+				hysteresis = <2000>;
+				temperature = <140000>;
+				type = "passive";
+			};
+
+			pf5302_crit: trip1 {
+				hysteresis = <2000>;
+				temperature = <155000>;
+				type = "critical";
+			};
+		};
+	};
 };
 
 &tpm6 {
diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi b/arch/arm64/boot/dts/freescale/imx95.dtsi
index 4ca6a7ea586e..1292677cbe4e 100644
--- a/arch/arm64/boot/dts/freescale/imx95.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx95.dtsi
@@ -260,35 +260,35 @@
 	sai1_mclk: clock-sai-mclk1 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency= <0>;
+		clock-frequency = <0>;
 		clock-output-names = "sai1_mclk";
 	};
 
 	sai2_mclk: clock-sai-mclk2 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency= <0>;
+		clock-frequency = <0>;
 		clock-output-names = "sai2_mclk";
 	};
 
 	sai3_mclk: clock-sai-mclk3 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency= <0>;
+		clock-frequency = <0>;
 		clock-output-names = "sai3_mclk";
 	};
 
 	sai4_mclk: clock-sai-mclk4 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency= <0>;
+		clock-frequency = <0>;
 		clock-output-names = "sai4_mclk";
 	};
 
 	sai5_mclk: clock-sai-mclk5 {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
-		clock-frequency= <0>;
+		clock-frequency = <0>;
 		clock-output-names = "sai5_mclk";
 	};
 
@@ -351,10 +351,18 @@
 				reg = <0x19>;
 			};
 
+			scmi_lmm: protocol@80 {
+				reg = <0x80>;
+			};
+
 			scmi_bbm: protocol@81 {
 				reg = <0x81>;
 			};
 
+			scmi_cpu: protocol@82 {
+				reg = <0x82>;
+			};
+
 			scmi_misc: protocol@84 {
 				reg = <0x84>;
 			};
@@ -484,6 +492,110 @@
 		#size-cells = <2>;
 		ranges;
 
+		etm0: etm@40840000 {
+			compatible = "arm,coresight-etm4x", "arm,primecell";
+			reg = <0x0 0x40840000 0x0 0x10000>;
+			arm,primecell-periphid = <0xbb95d>;
+			cpu = <&A55_0>;
+			clocks = <&scmi_clk IMX95_CLK_A55PERIPH>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+
+			out-ports {
+				port {
+					etm0_out_port: endpoint {
+						remote-endpoint = <&ca_funnel_in_port0>;
+					};
+				};
+			};
+		};
+
+		funnel0: funnel {
+			/*
+			 * non-configurable funnel don't show up on the AMBA
+			 * bus.  As such no need to add "arm,primecell".
+			 */
+			compatible = "arm,coresight-static-funnel";
+			status = "disabled";
+
+			in-ports {
+				port {
+					ca_funnel_in_port0: endpoint {
+						remote-endpoint = <&etm0_out_port>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					ca_funnel_out_port0: endpoint {
+						remote-endpoint = <&hugo_funnel_in_port0>;
+					};
+				};
+			};
+		};
+
+		funnel1: funnel-sys {
+			compatible = "arm,coresight-static-funnel";
+			status = "disabled";
+
+			in-ports {
+				port {
+					hugo_funnel_in_port0: endpoint {
+						remote-endpoint = <&ca_funnel_out_port0>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					hugo_funnel_out_port0: endpoint {
+						remote-endpoint = <&etf_in_port>;
+					};
+				};
+			};
+		};
+
+		etf: etf@41030000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x0 0x41030000 0x0 0x1000>;
+			clocks = <&scmi_clk IMX95_CLK_A55PERIPH>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+
+			in-ports {
+				port {
+					etf_in_port: endpoint {
+						remote-endpoint = <&hugo_funnel_out_port0>;
+					};
+				};
+			};
+
+			out-ports {
+				port {
+					etf_out_port: endpoint {
+						remote-endpoint = <&etr_in_port>;
+					};
+				};
+			};
+		};
+
+		etr: etr@41040000 {
+			compatible = "arm,coresight-tmc", "arm,primecell";
+			reg = <0x0 0x41040000 0x0 0x1000>;
+			clocks = <&scmi_clk IMX95_CLK_A55PERIPH>;
+			clock-names = "apb_pclk";
+			status = "disabled";
+
+			in-ports {
+				port {
+					etr_in_port: endpoint {
+						remote-endpoint = <&etf_out_port>;
+					};
+				};
+			};
+		};
+
 		aips2: bus@42000000 {
 			compatible = "fsl,aips-bus", "simple-bus";
 			reg = <0x0 0x42000000 0x0 0x800000>;
@@ -913,7 +1025,7 @@
 				interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&scmi_clk IMX95_CLK_LPUART7>;
 				clock-names = "ipg";
-				dmas = <&edma2 26 0 FSL_EDMA_RX>, <&edma2 25 0 0>;
+				dmas = <&edma2 88 0 FSL_EDMA_RX>, <&edma2 87 0 0>;
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
@@ -925,7 +1037,7 @@
 				interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
 				clocks = <&scmi_clk IMX95_CLK_LPUART8>;
 				clock-names = "ipg";
-				dmas = <&edma2 28 0 FSL_EDMA_RX>, <&edma2 27 0 0>;
+				dmas = <&edma2 90 0 FSL_EDMA_RX>, <&edma2 89 0 0>;
 				dma-names = "rx", "tx";
 				status = "disabled";
 			};
@@ -1100,7 +1212,7 @@
 				assigned-clock-rates = <400000000>;
 				bus-width = <8>;
 				fsl,tuning-start-tap = <1>;
-				fsl,tuning-step= <2>;
+				fsl,tuning-step = <2>;
 				status = "disabled";
 			};
 
@@ -1117,7 +1229,7 @@
 				assigned-clock-rates = <400000000>;
 				bus-width = <4>;
 				fsl,tuning-start-tap = <1>;
-				fsl,tuning-step= <2>;
+				fsl,tuning-step = <2>;
 				status = "disabled";
 			};
 
@@ -1134,7 +1246,7 @@
 				assigned-clock-rates = <400000000>;
 				bus-width = <4>;
 				fsl,tuning-start-tap = <1>;
-				fsl,tuning-step= <2>;
+				fsl,tuning-step = <2>;
 				status = "disabled";
 			};
 		};
@@ -1260,6 +1372,15 @@
 				status = "disabled";
 			};
 
+			system_counter: timer@44290000 {
+				compatible = "nxp,imx95-sysctr-timer";
+				reg = <0x44290000 0x30000>;
+				interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&osc_24m>;
+				clock-names = "per";
+				nxp,no-divider;
+			};
+
 			tpm1: pwm@44310000 {
 				compatible = "fsl,imx7ulp-pwm";
 				reg = <0x44310000 0x1000>;
@@ -1483,6 +1604,13 @@
 			};
 		};
 
+		mailbox@47300000 {
+			compatible = "fsl,imx95-mu-v2x";
+			reg = <0x0 0x47300000 0x0 0x10000>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+		};
+
 		mailbox@47320000 {
 			compatible = "fsl,imx95-mu-v2x";
 			reg = <0x0 0x47320000 0x0 0x10000>;
@@ -1490,6 +1618,20 @@
 			#mbox-cells = <2>;
 		};
 
+		mailbox@47330000 {
+			compatible = "fsl,imx95-mu-v2x";
+			reg = <0x0 0x47330000 0x0 0x10000>;
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+		};
+
+		mailbox@47340000 {
+			compatible = "fsl,imx95-mu-v2x";
+			reg = <0x0 0x47340000 0x0 0x10000>;
+			interrupts = <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>;
+			#mbox-cells = <2>;
+		};
+
 		mailbox@47350000 {
 			compatible = "fsl,imx95-mu-v2x";
 			reg = <0x0 0x47350000 0x0 0x10000>;
@@ -1515,6 +1657,25 @@
 			status = "disabled";
 		};
 
+		ocotp: efuse@47510000 {
+			compatible = "fsl,imx95-ocotp", "syscon";
+			reg = <0x0 0x47510000 0x0 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			eth_mac0: mac-address@0 {
+				reg = <0x0514 0x6>;
+			};
+
+			eth_mac1: mac-address@1 {
+				reg = <0x1514 0x6>;
+			};
+
+			eth_mac2: mac-address@2 {
+				reg = <0x2514 0x6>;
+			};
+		};
+
 		elemu0: mailbox@47520000 {
 			compatible = "fsl,imx95-mu-ele";
 			reg = <0x0 0x47520000 0x0 0x10000>;
@@ -1685,9 +1846,9 @@
 				 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>,
 				 <&hsio_blk_ctl 0>;
 			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux", "ref";
-			assigned-clocks =<&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
-					 <&scmi_clk IMX95_CLK_HSIOPLL>,
-					 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+			assigned-clocks = <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+					  <&scmi_clk IMX95_CLK_HSIOPLL>,
+					  <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
 			assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
 			assigned-clock-parents = <0>, <0>,
 						 <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
@@ -1719,12 +1880,13 @@
 				 <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
 				 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
 			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
-			assigned-clocks =<&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
-					 <&scmi_clk IMX95_CLK_HSIOPLL>,
-					 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+			assigned-clocks = <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+					  <&scmi_clk IMX95_CLK_HSIOPLL>,
+					  <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
 			assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
 			assigned-clock-parents = <0>, <0>,
 						 <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
+			msi-map = <0x0 &its 0x98 0x1>;
 			power-domains = <&scmi_devpd IMX95_PD_HSIO_TOP>;
 			status = "disabled";
 		};
@@ -1759,9 +1921,9 @@
 				 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>,
 				 <&hsio_blk_ctl 0>;
 			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux", "ref";
-			assigned-clocks =<&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
-					 <&scmi_clk IMX95_CLK_HSIOPLL>,
-					 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+			assigned-clocks = <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+					  <&scmi_clk IMX95_CLK_HSIOPLL>,
+					  <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
 			assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
 			assigned-clock-parents = <0>, <0>,
 						 <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
@@ -1795,9 +1957,9 @@
 				 <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
 				 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
 			clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux";
-			assigned-clocks =<&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
-					 <&scmi_clk IMX95_CLK_HSIOPLL>,
-					 <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
+			assigned-clocks = <&scmi_clk IMX95_CLK_HSIOPLL_VCO>,
+					  <&scmi_clk IMX95_CLK_HSIOPLL>,
+					  <&scmi_clk IMX95_CLK_HSIOPCIEAUX>;
 			assigned-clock-rates = <3600000000>, <100000000>, <10000000>;
 			assigned-clock-parents = <0>, <0>,
 						 <&scmi_clk IMX95_CLK_SYSPLL1_PFD1_DIV2>;
@@ -1843,7 +2005,7 @@
 				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&scmi_clk IMX95_CLK_VPU>,
 				 <&vpu_blk_ctrl IMX95_CLK_VPUBLK_JPEG_ENC>;
-			assigned-clocks = <&vpu_blk_ctrl IMX95_CLK_VPUBLK_JPEG_DEC>;
+			assigned-clocks = <&vpu_blk_ctrl IMX95_CLK_VPUBLK_JPEG_ENC>;
 			assigned-clock-parents = <&scmi_clk IMX95_CLK_VPUJPEG>;
 			power-domains = <&scmi_devpd IMX95_PD_VPU>;
 		};
@@ -1948,6 +2110,7 @@
 				};
 
 				netc_timer: ethernet@18,0 {
+					compatible = "pci1131,ee02";
 					reg = <0x00c000 0 0 0 0>;
 					status = "disabled";
 				};
diff --git a/arch/arm64/boot/dts/freescale/s32g2.dtsi b/arch/arm64/boot/dts/freescale/s32g2.dtsi
index 09d2fbbe1d8c..d167624d1f0c 100644
--- a/arch/arm64/boot/dts/freescale/s32g2.dtsi
+++ b/arch/arm64/boot/dts/freescale/s32g2.dtsi
@@ -325,6 +325,81 @@
 			};
 		};
 
+		ocotp: nvmem@400a4000 {
+			compatible = "nxp,s32g2-ocotp";
+			reg = <0x400a4000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		swt0: watchdog@40100000 {
+			compatible = "nxp,s32g2-swt";
+			reg = <0x40100000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt1: watchdog@40104000 {
+			compatible = "nxp,s32g2-swt";
+			reg = <0x40104000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt2: watchdog@40108000 {
+			compatible = "nxp,s32g2-swt";
+			reg = <0x40108000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt3: watchdog@4010c000 {
+			compatible = "nxp,s32g2-swt";
+			reg = <0x4010c000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		stm0: timer@4011c000 {
+			compatible = "nxp,s32g2-stm";
+			reg = <0x4011c000 0x3000>;
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		stm1: timer@40120000 {
+			compatible = "nxp,s32g2-stm";
+			reg = <0x40120000 0x3000>;
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		stm2: timer@40124000 {
+			compatible = "nxp,s32g2-stm";
+			reg = <0x40124000 0x3000>;
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		stm3: timer@40128000 {
+			compatible = "nxp,s32g2-stm";
+			reg = <0x40128000 0x3000>;
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
 		edma0: dma-controller@40144000 {
 			compatible = "nxp,s32g2-edma";
 			reg = <0x40144000 0x24000>,
@@ -479,6 +554,57 @@
 			status = "disabled";
 		};
 
+		swt4: watchdog@40200000 {
+			compatible = "nxp,s32g2-swt";
+			reg = <0x40200000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt5: watchdog@40204000 {
+			compatible = "nxp,s32g2-swt";
+			reg = <0x40204000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt6: watchdog@40208000 {
+			compatible = "nxp,s32g2-swt";
+			reg = <0x40208000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		stm4: timer@4021c000 {
+			compatible = "nxp,s32g2-stm";
+			reg = <0x4021c000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		stm5: timer@40220000 {
+			compatible = "nxp,s32g2-stm";
+			reg = <0x40220000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		stm6: timer@40224000 {
+			compatible = "nxp,s32g2-stm";
+			reg = <0x40224000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
 		edma1: dma-controller@40244000 {
 			compatible = "nxp,s32g2-edma";
 			reg = <0x40244000 0x24000>,
diff --git a/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts b/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts
index b5ba51696f43..4f58be68c818 100644
--- a/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts
+++ b/arch/arm64/boot/dts/freescale/s32g274a-rdb2.dts
@@ -40,6 +40,26 @@
 	status = "okay";
 };
 
+&stm0 {
+	status = "okay";
+};
+
+&stm1 {
+	status = "okay";
+};
+
+&stm2 {
+	status = "okay";
+};
+
+&stm3 {
+	status = "okay";
+};
+
+&swt0 {
+	status = "okay";
+};
+
 &usdhc0 {
 	pinctrl-names = "default", "state_100mhz", "state_200mhz";
 	pinctrl-0 = <&pinctrl_usdhc0>;
diff --git a/arch/arm64/boot/dts/freescale/s32g3.dtsi b/arch/arm64/boot/dts/freescale/s32g3.dtsi
index 39effbe8217c..be3a582ebc1b 100644
--- a/arch/arm64/boot/dts/freescale/s32g3.dtsi
+++ b/arch/arm64/boot/dts/freescale/s32g3.dtsi
@@ -383,6 +383,81 @@
 			};
 		};
 
+		ocotp: nvmem@400a4000 {
+			compatible = "nxp,s32g3-ocotp", "nxp,s32g2-ocotp";
+			reg = <0x400a4000 0x400>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+		};
+
+		swt0: watchdog@40100000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x40100000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt1: watchdog@40104000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x40104000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt2: watchdog@40108000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x40108000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt3: watchdog@4010c000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x4010c000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		stm0: timer@4011c000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x4011c000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		stm1: timer@40120000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x40120000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		stm2: timer@40124000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x40124000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		stm3: timer@40128000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x40128000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
 		edma0: dma-controller@40144000 {
 			compatible = "nxp,s32g3-edma", "nxp,s32g2-edma";
 			reg = <0x40144000 0x24000>,
@@ -542,6 +617,65 @@
 			status = "disabled";
 		};
 
+		swt4: watchdog@40200000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x40200000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt5: watchdog@40204000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x40204000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt6: watchdog@40208000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x40208000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt7: watchdog@4020C000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x4020C000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		stm4: timer@4021c000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x4021c000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		stm5: timer@40220000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x40220000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		stm6: timer@40224000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x40224000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
 		edma1: dma-controller@40244000 {
 			compatible = "nxp,s32g3-edma", "nxp,s32g2-edma";
 			reg = <0x40244000 0x24000>,
@@ -670,6 +804,74 @@
 			status = "disabled";
 		};
 
+		swt8: watchdog@40500000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <40500000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt9: watchdog@40504000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x40504000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt10: watchdog@40508000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x40508000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		swt11: watchdog@4050c000 {
+			compatible = "nxp,s32g3-swt", "nxp,s32g2-swt";
+			reg = <0x4050c000 0x1000>;
+			clocks = <&clks 0x3a>, <&clks 0x3b>, <&clks 0x3b>;
+			clock-names = "counter", "module", "register";
+			status = "disabled";
+		};
+
+		stm8: timer@40520000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x40520000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		stm9: timer@40524000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x40524000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		stm10: timer@40528000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x40528000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
+		stm11: timer@4052c000 {
+			compatible = "nxp,s32g3-stm", "nxp,s32g2-stm";
+			reg = <0x4052c000 0x3000>;
+			clocks = <&clks 0x3b>, <&clks 0x3c>, <&clks 0x3c>;
+			clock-names = "counter", "module", "register";
+			interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@50800000 {
 			compatible = "arm,gic-v3";
 			#interrupt-cells = <3>;
diff --git a/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts b/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts
index 802f543cae4a..e94f70ad82d9 100644
--- a/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts
+++ b/arch/arm64/boot/dts/freescale/s32g399a-rdb3.dts
@@ -40,6 +40,42 @@
 	status = "okay";
 };
 
+&stm0 {
+	status = "okay";
+};
+
+&stm1 {
+	status = "okay";
+};
+
+&stm2 {
+	status = "okay";
+};
+
+&stm3 {
+	status = "okay";
+};
+
+&stm4 {
+	status = "okay";
+};
+
+&stm5 {
+	status = "okay";
+};
+
+&stm6 {
+	status = "okay";
+};
+
+&stm8 {
+	status = "okay";
+};
+
+&swt0 {
+	status = "okay";
+};
+
 &i2c4 {
 	current-sensor@40 {
 		compatible = "ti,ina231";
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
index 7d9394a04302..04e99cd7e74b 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex5.dtsi
@@ -486,5 +486,341 @@
 			clocks = <&qspi_clk>;
 			status = "disabled";
 		};
+
+		gmac0: ethernet@10810000 {
+			compatible = "altr,socfpga-stmmac-agilex5",
+				     "snps,dwxgmac-2.10";
+			reg = <0x10810000 0x3500>;
+			interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&rst EMAC0_RESET>, <&rst EMAC0_OCP_RESET>;
+			reset-names = "stmmaceth", "ahb";
+			clocks = <&clkmgr AGILEX5_EMAC0_CLK>,
+				 <&clkmgr AGILEX5_EMAC_PTP_CLK>;
+			clock-names = "stmmaceth", "ptp_ref";
+			mac-address = [00 00 00 00 00 00];
+			tx-fifo-depth = <32768>;
+			rx-fifo-depth = <16384>;
+			snps,multicast-filter-bins = <64>;
+			snps,perfect-filter-entries = <64>;
+			snps,axi-config = <&stmmac_axi_emac0_setup>;
+			snps,mtl-rx-config = <&mtl_rx_emac0_setup>;
+			snps,mtl-tx-config = <&mtl_tx_emac0_setup>;
+			snps,pbl = <32>;
+			snps,tso;
+			altr,sysmgr-syscon = <&sysmgr 0x44 0>;
+			snps,clk-csr = <0>;
+			status = "disabled";
+
+			stmmac_axi_emac0_setup: stmmac-axi-config {
+				snps,wr_osr_lmt = <31>;
+				snps,rd_osr_lmt = <31>;
+				snps,blen = <0 0 0 32 16 8 4>;
+			};
+
+			mtl_rx_emac0_setup: rx-queues-config {
+				snps,rx-queues-to-use = <8>;
+				snps,rx-sched-sp;
+				queue0 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x0>;
+				};
+				queue1 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x1>;
+				};
+				queue2 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x2>;
+				};
+				queue3 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x3>;
+				};
+				queue4 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x4>;
+				};
+				queue5 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x5>;
+				};
+				queue6 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x6>;
+				};
+				queue7 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x7>;
+				};
+			};
+
+			mtl_tx_emac0_setup: tx-queues-config {
+				snps,tx-queues-to-use = <8>;
+				snps,tx-sched-wrr;
+				queue0 {
+					snps,weight = <0x09>;
+					snps,dcb-algorithm;
+				};
+				queue1 {
+					snps,weight = <0x0A>;
+					snps,dcb-algorithm;
+				};
+				queue2 {
+					snps,weight = <0x0B>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue3 {
+					snps,weight = <0x0C>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue4 {
+					snps,weight = <0x0D>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue5 {
+					snps,weight = <0x0E>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue6 {
+					snps,weight = <0x0F>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue7 {
+					snps,weight = <0x10>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+			};
+		};
+
+		gmac1: ethernet@10820000 {
+			compatible = "altr,socfpga-stmmac-agilex5",
+				     "snps,dwxgmac-2.10";
+			reg = <0x10820000 0x3500>;
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&rst EMAC1_RESET>, <&rst EMAC1_OCP_RESET>;
+			reset-names = "stmmaceth", "ahb";
+			clocks = <&clkmgr AGILEX5_EMAC1_CLK>,
+				 <&clkmgr AGILEX5_EMAC_PTP_CLK>;
+			clock-names = "stmmaceth", "ptp_ref";
+			mac-address = [00 00 00 00 00 00];
+			tx-fifo-depth = <32768>;
+			rx-fifo-depth = <16384>;
+			snps,multicast-filter-bins = <64>;
+			snps,perfect-filter-entries = <64>;
+			snps,axi-config = <&stmmac_axi_emac1_setup>;
+			snps,mtl-rx-config = <&mtl_rx_emac1_setup>;
+			snps,mtl-tx-config = <&mtl_tx_emac1_setup>;
+			snps,pbl = <32>;
+			snps,tso;
+			altr,sysmgr-syscon = <&sysmgr 0x48 0>;
+			snps,clk-csr = <0>;
+			status = "disabled";
+
+			stmmac_axi_emac1_setup: stmmac-axi-config {
+				snps,wr_osr_lmt = <31>;
+				snps,rd_osr_lmt = <31>;
+				snps,blen = <0 0 0 32 16 8 4>;
+			};
+
+			mtl_rx_emac1_setup: rx-queues-config {
+				snps,rx-queues-to-use = <8>;
+				snps,rx-sched-sp;
+				queue0 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x0>;
+				};
+				queue1 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x1>;
+				};
+				queue2 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x2>;
+				};
+				queue3 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x3>;
+				};
+				queue4 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x4>;
+				};
+				queue5 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x5>;
+				};
+				queue6 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x6>;
+				};
+				queue7 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x7>;
+				};
+			};
+
+			mtl_tx_emac1_setup: tx-queues-config {
+				snps,tx-queues-to-use = <8>;
+				snps,tx-sched-wrr;
+				queue0 {
+					snps,weight = <0x09>;
+					snps,dcb-algorithm;
+				};
+				queue1 {
+					snps,weight = <0x0A>;
+					snps,dcb-algorithm;
+				};
+				queue2 {
+					snps,weight = <0x0B>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue3 {
+					snps,weight = <0x0C>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue4 {
+					snps,weight = <0x0D>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue5 {
+					snps,weight = <0x0E>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue6 {
+					snps,weight = <0x0F>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue7 {
+					snps,weight = <0x10>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+			};
+		};
+
+		gmac2: ethernet@10830000 {
+			compatible = "altr,socfpga-stmmac-agilex5",
+				     "snps,dwxgmac-2.10";
+			reg = <0x10830000 0x3500>;
+			interrupts = <GIC_SPI 224 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "macirq";
+			resets = <&rst EMAC2_RESET>, <&rst EMAC2_OCP_RESET>;
+			reset-names = "stmmaceth", "ahb";
+			clocks = <&clkmgr AGILEX5_EMAC2_CLK>,
+				 <&clkmgr AGILEX5_EMAC_PTP_CLK>;
+			clock-names = "stmmaceth", "ptp_ref";
+			mac-address = [00 00 00 00 00 00];
+			tx-fifo-depth = <32768>;
+			rx-fifo-depth = <16384>;
+			snps,multicast-filter-bins = <64>;
+			snps,perfect-filter-entries = <64>;
+			snps,axi-config = <&stmmac_axi_emac2_setup>;
+			snps,mtl-rx-config = <&mtl_rx_emac2_setup>;
+			snps,mtl-tx-config = <&mtl_tx_emac2_setup>;
+			snps,pbl = <32>;
+			snps,tso;
+			altr,sysmgr-syscon = <&sysmgr 0x4c 0>;
+			snps,clk-csr = <0>;
+			status = "disabled";
+
+			stmmac_axi_emac2_setup: stmmac-axi-config {
+				snps,wr_osr_lmt = <31>;
+				snps,rd_osr_lmt = <31>;
+				snps,blen = <0 0 0 32 16 8 4>;
+			};
+
+			mtl_rx_emac2_setup: rx-queues-config {
+				snps,rx-queues-to-use = <8>;
+				snps,rx-sched-sp;
+				queue0 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x0>;
+				};
+				queue1 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x1>;
+				};
+				queue2 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x2>;
+				};
+				queue3 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x3>;
+				};
+				queue4 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x4>;
+				};
+				queue5 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x5>;
+				};
+				queue6 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x6>;
+				};
+				queue7 {
+					snps,dcb-algorithm;
+					snps,map-to-dma-channel = <0x7>;
+				};
+			};
+
+			mtl_tx_emac2_setup: tx-queues-config {
+				snps,tx-queues-to-use = <8>;
+				snps,tx-sched-wrr;
+				queue0 {
+					snps,weight = <0x09>;
+					snps,dcb-algorithm;
+				};
+				queue1 {
+					snps,weight = <0x0A>;
+					snps,dcb-algorithm;
+				};
+				queue2 {
+					snps,weight = <0x0B>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue3 {
+					snps,weight = <0x0C>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue4 {
+					snps,weight = <0x0D>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue5 {
+					snps,weight = <0x0E>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue6 {
+					snps,weight = <0x0F>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+				queue7 {
+					snps,weight = <0x10>;
+					snps,coe-unsupported;
+					snps,dcb-algorithm;
+				};
+			};
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts
index d3b913b7902c..e9776e1cdc9a 100644
--- a/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex5_socdk.dts
@@ -10,6 +10,9 @@
 
 	aliases {
 		serial0 = &uart0;
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		ethernet2 = &gmac2;
 	};
 
 	chosen {
@@ -37,6 +40,23 @@
 	status = "okay";
 };
 
+&gmac2 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&emac2_phy0>;
+	max-frame-size = <9000>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		emac2_phy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
 &gpio1 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/marvell/Makefile b/arch/arm64/boot/dts/marvell/Makefile
index 40e5ac6cd468..a774bc74a0a0 100644
--- a/arch/arm64/boot/dts/marvell/Makefile
+++ b/arch/arm64/boot/dts/marvell/Makefile
@@ -1,5 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 # Mvebu SoC Family
+dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-atlas-v5.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-db.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-eDPU.dtb
 dtb-$(CONFIG_ARCH_MVEBU) += armada-3720-espressobin.dtb
diff --git a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
index 605f5be1538c..4878773883c9 100644
--- a/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/ac5-98dx25xx.dtsi
@@ -322,7 +322,7 @@
 
 		nand: nand-controller@805b0000 {
 			compatible = "marvell,ac5-nand-controller";
-			reg =  <0x0 0x805b0000 0x0 0x00000054>;
+			reg = <0x0 0x805b0000 0x0 0x00000054>;
 			#address-cells = <0x1>;
 			#size-cells = <0x0>;
 			interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-atlas-v5.dts b/arch/arm64/boot/dts/marvell/armada-3720-atlas-v5.dts
new file mode 100644
index 000000000000..070d10a705bb
--- /dev/null
+++ b/arch/arm64/boot/dts/marvell/armada-3720-atlas-v5.dts
@@ -0,0 +1,110 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Device Tree file for RIPE Atlas Probe v5
+ * 2025 by Marek Behún <kabel@kernel.org>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/bus/moxtet.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include "armada-372x.dtsi"
+
+/ {
+	model = "RIPE Atlas Probe v5";
+	compatible = "ripe,atlas-v5", "marvell,armada3720",
+		     "marvell,armada3710";
+
+	aliases {
+		ethernet0 = &eth0;
+		mmc0 = &sdhci0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@0 {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000 0x00000000 0x20000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led {
+			gpios = <&gpiosb 21 GPIO_ACTIVE_LOW>;
+			function = LED_FUNCTION_ACTIVITY;
+			color = <LED_COLOR_ID_RED>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	vsdc_reg: vsdc-reg {
+		compatible = "regulator-gpio";
+		regulator-name = "vsdc";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+
+		gpios = <&gpiosb 23 GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <1800000 0x1
+			  3300000 0x0>;
+		enable-active-high;
+	};
+
+	firmware {
+		armada-3700-rwtm {
+			compatible = "marvell,armada-3700-rwtm-firmware", "cznic,turris-mox-rwtm";
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&eth0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_pins>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&phy1>;
+	status = "okay";
+};
+
+&sdhci0 {
+	non-removable;
+	bus-width = <4>;
+	mmc-ddr-1_8v;
+	mmc-hs400-1_8v;
+	sd-uhs-sdr104;
+	marvell,xenon-emmc;
+	marvell,xenon-tun-count = <9>;
+	marvell,pad-type = "fixed-1-8v";
+	vqmmc-supply = <&vsdc_reg>;
+
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc_pins>;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	mmccard: mmccard@0 {
+		compatible = "mmc-card";
+		reg = <0>;
+	};
+};
+
+&mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&smi_pins>;
+	status = "okay";
+
+	phy1: ethernet-phy@1 {
+		reg = <1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
index 75b0fdc3efb2..c612317043ea 100644
--- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi
@@ -524,6 +524,7 @@
 			pcie_intc: interrupt-controller {
 				interrupt-controller;
 				#interrupt-cells = <1>;
+				#address-cells = <0>;
 			};
 		};
 	};
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
index 0d4a5fd9503f..f2d278d171eb 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
@@ -345,11 +345,13 @@
 	/* CPS Lane 1 - U32 */
 	sata-port@0 {
 		phys = <&cp1_comphy1 0>;
+		status = "okay";
 	};
 
 	/* CPS Lane 3 - U31 */
 	sata-port@1 {
 		phys = <&cp1_comphy3 1>;
+		status = "okay";
 	};
 };
 
diff --git a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
index a057e119492f..d9d409eac259 100644
--- a/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-cp11x.dtsi
@@ -202,6 +202,7 @@
 			CP11X_LABEL(icu_nsr): interrupt-controller@10 {
 				compatible = "marvell,cp110-icu-nsr";
 				reg = <0x10 0x20>;
+				#address-cells = <0>;
 				#interrupt-cells = <2>;
 				interrupt-controller;
 				msi-parent = <&gicp>;
diff --git a/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi b/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi
index ad0ab34b6602..bd42bfbe408b 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9130-cf.dtsi
@@ -152,11 +152,12 @@
 
 /* SRDS #0 - SATA on M.2 connector */
 &cp0_sata0 {
-	phys = <&cp0_comphy0 1>;
 	status = "okay";
 
-	/* only port 1 is available */
-	/delete-node/ sata-port@0;
+	sata-port@1 {
+		phys = <&cp0_comphy0 1>;
+		status = "okay";
+	};
 };
 
 /* microSD */
diff --git a/arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi b/arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi
index a997bbabedd8..f95202decfce 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9130-sr-som.dtsi
@@ -61,6 +61,8 @@
 	pinctrl-0 = <&ap_mmc0_pins>;
 	pinctrl-names = "default";
 	vqmmc-supply = <&v_1_8>;
+	no-sdio;
+	non-removable;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts b/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts
index 47234d0858dd..338853d3b179 100644
--- a/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts
+++ b/arch/arm64/boot/dts/marvell/cn9131-cf-solidwan.dts
@@ -563,11 +563,13 @@
 
 /* SRDS #1 - SATA on M.2 (J44) */
 &cp1_sata0 {
-	phys = <&cp1_comphy1 0>;
 	status = "okay";
 
 	/* only port 0 is available */
-	/delete-node/ sata-port@1;
+	sata-port@0 {
+		phys = <&cp1_comphy1 0>;
+		status = "okay";
+	};
 };
 
 &cp1_syscon0 {
diff --git a/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts b/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts
index 0f53745a6fa0..5cf83d8ca1f5 100644
--- a/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts
+++ b/arch/arm64/boot/dts/marvell/cn9132-clearfog.dts
@@ -413,7 +413,13 @@
 /* SRDS #0,#1,#2,#3 - PCIe */
 &cp0_pcie0 {
 	num-lanes = <4>;
-	phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>, <&cp0_comphy2 0>, <&cp0_comphy3 0>;
+	/*
+	 * The mvebu-comphy driver does not currently know how to pass correct
+	 * lane-count to ATF while configuring the serdes lanes.
+	 * Rely on bootloader configuration only.
+	 *
+	 * phys = <&cp0_comphy0 0>, <&cp0_comphy1 0>, <&cp0_comphy2 0>, <&cp0_comphy3 0>;
+	 */
 	status = "okay";
 };
 
@@ -475,7 +481,13 @@
 /* SRDS #0,#1 - PCIe */
 &cp1_pcie0 {
 	num-lanes = <2>;
-	phys = <&cp1_comphy0 0>, <&cp1_comphy1 0>;
+	/*
+	 * The mvebu-comphy driver does not currently know how to pass correct
+	 * lane-count to ATF while configuring the serdes lanes.
+	 * Rely on bootloader configuration only.
+	 *
+	 * phys = <&cp1_comphy0 0>, <&cp1_comphy1 0>;
+	 */
 	status = "okay";
 };
 
@@ -512,10 +524,9 @@
 	status = "okay";
 
 	/* only port 1 is available */
-	/delete-node/ sata-port@0;
-
 	sata-port@1 {
 		phys = <&cp1_comphy3 1>;
+		status = "okay";
 	};
 };
 
@@ -559,7 +570,7 @@
 };
 
 &cp2_ethernet {
-	status =  "okay";
+	status = "okay";
 };
 
 /* SRDS #2 - 5GE */
@@ -572,7 +583,7 @@
 };
 
 &cp2_gpio1 {
-	pinctrl-names= "default";
+	pinctrl-names = "default";
 	pinctrl-0 = <&cp2_rsvd9_pins>;
 
 	/* J21 */
@@ -631,9 +642,8 @@
 	status = "okay";
 
 	/* only port 1 is available */
-	/delete-node/ sata-port@0;
-
 	sata-port@1 {
+		status = "okay";
 		phys = <&cp2_comphy3 1>;
 	};
 };
diff --git a/arch/arm64/boot/dts/marvell/cn9132-sr-cex7.dtsi b/arch/arm64/boot/dts/marvell/cn9132-sr-cex7.dtsi
index afc041c1c448..91ba5f7dc9b4 100644
--- a/arch/arm64/boot/dts/marvell/cn9132-sr-cex7.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9132-sr-cex7.dtsi
@@ -137,6 +137,14 @@
 	pinctrl-0 = <&ap_mmc0_pins>;
 	pinctrl-names = "default";
 	vqmmc-supply = <&v_1_8>;
+	/*
+	 * Not stable in HS modes - phy needs "more calibration", so disable
+	 * UHS (by preventing voltage switch), SDR104, SDR50 and DDR50 modes.
+	 */
+	no-1-8-v;
+	no-sd;
+	no-sdio;
+	non-removable;
 	status = "okay";
 };
 
@@ -442,7 +450,7 @@
 		reg = <0>;
 		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
 		spi-max-frequency = <10000000>;
-		pinctrl-names  = "default";
+		pinctrl-names = "default";
 		pinctrl-0 = <&cp1_tpm_irq_pins>;
 		interrupt-parent = <&cp1_gpio1>;
 		interrupts = <17 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm64/boot/dts/mediatek/mt6331.dtsi b/arch/arm64/boot/dts/mediatek/mt6331.dtsi
index d89858c73ab1..243afbffa21f 100644
--- a/arch/arm64/boot/dts/mediatek/mt6331.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6331.dtsi
@@ -6,12 +6,12 @@
 #include <dt-bindings/input/input.h>
 
 &pwrap {
-	pmic: mt6331 {
+	pmic: pmic {
 		compatible = "mediatek,mt6331";
 		interrupt-controller;
 		#interrupt-cells = <2>;
 
-		mt6331regulator: mt6331regulator {
+		mt6331regulator: regulators {
 			compatible = "mediatek,mt6331-regulator";
 
 			mt6331_vdvfs11_reg: buck-vdvfs11 {
@@ -258,7 +258,7 @@
 			};
 
 			mt6331_vdig18_reg: ldo-vdig18 {
-				regulator-name = "dvdd18_dig";
+				regulator-name = "vdig18";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-ramp-delay = <0>;
@@ -266,11 +266,11 @@
 			};
 		};
 
-		mt6331rtc: mt6331rtc {
+		mt6331rtc: rtc {
 			compatible = "mediatek,mt6331-rtc";
 		};
 
-		mt6331keys: mt6331keys {
+		mt6331keys: keys {
 			compatible = "mediatek,mt6331-keys";
 			power {
 				linux,keycodes = <KEY_POWER>;
diff --git a/arch/arm64/boot/dts/mediatek/mt6755.dtsi b/arch/arm64/boot/dts/mediatek/mt6755.dtsi
index b55d3fac9bd4..8da5c0a56a02 100644
--- a/arch/arm64/boot/dts/mediatek/mt6755.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6755.dtsi
@@ -98,7 +98,7 @@
 			     (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
 	};
 
-	sysirq: intpol-controller@10200620 {
+	sysirq: interrupt-controller@10200620 {
 		compatible = "mediatek,mt6755-sysirq",
 			     "mediatek,mt6577-sysirq";
 		interrupt-controller;
diff --git a/arch/arm64/boot/dts/mediatek/mt6779.dtsi b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
index 5c579e88e749..70f3375916e8 100644
--- a/arch/arm64/boot/dts/mediatek/mt6779.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6779.dtsi
@@ -138,7 +138,7 @@
 
 		};
 
-		sysirq: intpol-controller@c53a650 {
+		sysirq: interrupt-controller@c53a650 {
 			compatible = "mediatek,mt6779-sysirq",
 				     "mediatek,mt6577-sysirq";
 			interrupt-controller;
diff --git a/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
index 91de920c2245..fccb948cfa45 100644
--- a/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
+++ b/arch/arm64/boot/dts/mediatek/mt6795-sony-xperia-m5.dts
@@ -212,7 +212,7 @@
 
 &mmc0 {
 	/* eMMC controller */
-	mediatek,latch-ck = <0x14>; /* hs400 */
+	mediatek,latch-ck = <4>; /* hs400 */
 	mediatek,hs200-cmd-int-delay = <1>;
 	mediatek,hs400-cmd-int-delay = <1>;
 	mediatek,hs400-ds-dly3 = <0x1a>;
@@ -227,6 +227,8 @@
 
 &mmc1 {
 	/* MicroSD card slot */
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins_default>;
 	vmmc-supply = <&mt6331_vmc_reg>;
 	vqmmc-supply = <&mt6331_vmch_reg>;
 	status = "okay";
@@ -234,6 +236,8 @@
 
 &mmc2 {
 	/* SDIO WiFi on MMC2 */
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc2_pins_default>;
 	vmmc-supply = <&mt6331_vmc_reg>;
 	vqmmc-supply = <&mt6331_vmch_reg>;
 	status = "okay";
@@ -311,6 +315,40 @@
 		};
 	};
 
+	mmc1_pins_default: microsd-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO171__FUNC_MSDC1_DAT0>,
+				 <PINMUX_GPIO172__FUNC_MSDC1_DAT1>,
+				 <PINMUX_GPIO173__FUNC_MSDC1_DAT2>,
+				 <PINMUX_GPIO174__FUNC_MSDC1_DAT3>,
+				 <PINMUX_GPIO170__FUNC_MSDC1_CMD>;
+			input-enable;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO175__FUNC_MSDC1_CLK>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+	};
+
+	mmc2_pins_default: sdio-pins {
+		pins-cmd-dat {
+			pinmux = <PINMUX_GPIO100__FUNC_MSDC2_DAT0>,
+				 <PINMUX_GPIO101__FUNC_MSDC2_DAT1>,
+				 <PINMUX_GPIO102__FUNC_MSDC2_DAT2>,
+				 <PINMUX_GPIO103__FUNC_MSDC2_DAT3>,
+				 <PINMUX_GPIO105__FUNC_MSDC2_CMD>;
+			input-enable;
+			bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+		};
+
+		pins-clk {
+			pinmux = <PINMUX_GPIO104__FUNC_MSDC2_CLK>;
+			bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+		};
+	};
+
 	nfc_pins: nfc-pins {
 		pins-irq {
 			pinmux = <PINMUX_GPIO3__FUNC_GPIO3>;
diff --git a/arch/arm64/boot/dts/mediatek/mt6795.dtsi b/arch/arm64/boot/dts/mediatek/mt6795.dtsi
index e5e269a660b1..58833e5135c8 100644
--- a/arch/arm64/boot/dts/mediatek/mt6795.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6795.dtsi
@@ -404,7 +404,7 @@
 			clock-names = "spi", "wrap";
 		};
 
-		sysirq: intpol-controller@10200620 {
+		sysirq: interrupt-controller@10200620 {
 			compatible = "mediatek,mt6795-sysirq",
 				     "mediatek,mt6577-sysirq";
 			interrupt-controller;
@@ -427,6 +427,7 @@
 			clocks = <&infracfg CLK_INFRA_M4U>;
 			clock-names = "bclk";
 			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_LOW>;
+			mediatek,infracfg = <&infracfg>;
 			mediatek,larbs = <&larb0 &larb1 &larb2 &larb3>;
 			power-domains = <&spm MT6795_POWER_DOMAIN_MM>;
 			#iommu-cells = <1>;
diff --git a/arch/arm64/boot/dts/mediatek/mt6797.dtsi b/arch/arm64/boot/dts/mediatek/mt6797.dtsi
index 0e9d11b4585b..8ac98a378fd6 100644
--- a/arch/arm64/boot/dts/mediatek/mt6797.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6797.dtsi
@@ -135,71 +135,71 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 
-		uart0_pins_a: uart0 {
-			pins0 {
+		uart0_pins_a: uart0-pins {
+			pins-bus {
 				pinmux = <MT6797_GPIO234__FUNC_UTXD0>,
 					 <MT6797_GPIO235__FUNC_URXD0>;
 			};
 		};
 
-		uart1_pins_a: uart1 {
-			pins1 {
+		uart1_pins_a: uart1-pins {
+			pins-bus {
 				pinmux = <MT6797_GPIO232__FUNC_URXD1>,
 					 <MT6797_GPIO233__FUNC_UTXD1>;
 			};
 		};
 
-		i2c0_pins_a: i2c0 {
-			pins0 {
+		i2c0_pins_a: i2c0-pins {
+			pins-bus {
 				pinmux = <MT6797_GPIO37__FUNC_SCL0_0>,
 					 <MT6797_GPIO38__FUNC_SDA0_0>;
 			};
 		};
 
-		i2c1_pins_a: i2c1 {
-			pins1 {
+		i2c1_pins_a: i2c1-pins {
+			pins-bus {
 				pinmux = <MT6797_GPIO55__FUNC_SCL1_0>,
 					 <MT6797_GPIO56__FUNC_SDA1_0>;
 			};
 		};
 
-		i2c2_pins_a: i2c2 {
-			pins2 {
+		i2c2_pins_a: i2c2-pins {
+			pins-bus {
 				pinmux = <MT6797_GPIO96__FUNC_SCL2_0>,
 					 <MT6797_GPIO95__FUNC_SDA2_0>;
 			};
 		};
 
-		i2c3_pins_a: i2c3 {
-			pins3 {
+		i2c3_pins_a: i2c3-pins {
+			pins-bus {
 				pinmux = <MT6797_GPIO75__FUNC_SDA3_0>,
 					 <MT6797_GPIO74__FUNC_SCL3_0>;
 			};
 		};
 
-		i2c4_pins_a: i2c4 {
-			pins4 {
+		i2c4_pins_a: i2c4-pins {
+			pins-bus {
 				pinmux = <MT6797_GPIO238__FUNC_SDA4_0>,
 					 <MT6797_GPIO239__FUNC_SCL4_0>;
 			};
 		};
 
-		i2c5_pins_a: i2c5 {
-			pins5 {
+		i2c5_pins_a: i2c5-pins {
+			pins-bus {
 				pinmux = <MT6797_GPIO240__FUNC_SDA5_0>,
 					 <MT6797_GPIO241__FUNC_SCL5_0>;
 			};
 		};
 
-		i2c6_pins_a: i2c6 {
-			pins6 {
+		i2c6_pins_a: i2c6-pins {
+			pins-bus {
 				pinmux = <MT6797_GPIO152__FUNC_SDA6_0>,
 					 <MT6797_GPIO151__FUNC_SCL6_0>;
 			};
 		};
 
-		i2c7_pins_a: i2c7 {
-			pins7 {
+		i2c7_pins_a: i2c7-pins {
+			pins-bus {
 				pinmux = <MT6797_GPIO154__FUNC_SDA7_0>,
 					 <MT6797_GPIO153__FUNC_SCL7_0>;
 			};
@@ -228,7 +228,7 @@
 		#clock-cells = <1>;
 	};
 
-	sysirq: intpol-controller@10200620 {
+	sysirq: interrupt-controller@10200620 {
 		compatible = "mediatek,mt6797-sysirq",
 			     "mediatek,mt6577-sysirq";
 		interrupt-controller;
@@ -285,7 +285,6 @@
 	i2c0: i2c@11007000 {
 		compatible = "mediatek,mt6797-i2c",
 			     "mediatek,mt6577-i2c";
-		id = <0>;
 		reg = <0 0x11007000 0 0x1000>,
 		      <0 0x11000100 0 0x80>;
 		interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_LOW>;
@@ -301,7 +300,6 @@
 	i2c1: i2c@11008000 {
 		compatible = "mediatek,mt6797-i2c",
 			     "mediatek,mt6577-i2c";
-		id = <1>;
 		reg = <0 0x11008000 0 0x1000>,
 		      <0 0x11000180 0 0x80>;
 		interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_LOW>;
@@ -317,7 +315,6 @@
 	i2c8: i2c@11009000 {
 		compatible = "mediatek,mt6797-i2c",
 			     "mediatek,mt6577-i2c";
-		id = <8>;
 		reg = <0 0x11009000 0 0x1000>,
 		      <0 0x11000200 0 0x80>;
 		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_LOW>;
@@ -334,7 +331,6 @@
 	i2c9: i2c@1100d000 {
 		compatible = "mediatek,mt6797-i2c",
 			     "mediatek,mt6577-i2c";
-		id = <9>;
 		reg = <0 0x1100d000 0 0x1000>,
 		      <0 0x11000280 0 0x80>;
 		interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_LOW>;
@@ -351,7 +347,6 @@
 	i2c6: i2c@1100e000 {
 		compatible = "mediatek,mt6797-i2c",
 			     "mediatek,mt6577-i2c";
-		id = <6>;
 		reg = <0 0x1100e000 0 0x1000>,
 		      <0 0x11000500 0 0x80>;
 		interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_LOW>;
@@ -367,7 +362,6 @@
 	i2c7: i2c@11010000 {
 		compatible = "mediatek,mt6797-i2c",
 			     "mediatek,mt6577-i2c";
-		id = <7>;
 		reg = <0 0x11010000 0 0x1000>,
 		      <0 0x11000580 0 0x80>;
 		interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_LOW>;
@@ -383,7 +377,6 @@
 	i2c4: i2c@11011000 {
 		compatible = "mediatek,mt6797-i2c",
 			     "mediatek,mt6577-i2c";
-		id = <4>;
 		reg = <0 0x11011000 0 0x1000>,
 		      <0 0x11000300 0 0x80>;
 		interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_LOW>;
@@ -399,7 +392,6 @@
 	i2c2: i2c@11013000 {
 		compatible = "mediatek,mt6797-i2c",
 			     "mediatek,mt6577-i2c";
-		id = <2>;
 		reg = <0 0x11013000 0 0x1000>,
 		      <0 0x11000400 0 0x80>;
 		interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_LOW>;
@@ -416,7 +408,6 @@
 	i2c3: i2c@11014000 {
 		compatible = "mediatek,mt6797-i2c",
 			     "mediatek,mt6577-i2c";
-		id = <3>;
 		reg = <0 0x11014000 0 0x1000>,
 		      <0 0x11000480 0 0x80>;
 		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
@@ -433,7 +424,6 @@
 	i2c5: i2c@1101c000 {
 		compatible = "mediatek,mt6797-i2c",
 			     "mediatek,mt6577-i2c";
-		id = <5>;
 		reg = <0 0x1101c000 0 0x1000>,
 		      <0 0x11000380 0 0x80>;
 		interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7981b.dtsi b/arch/arm64/boot/dts/mediatek/mt7981b.dtsi
index 5cbea9cd411f..277c11247c13 100644
--- a/arch/arm64/boot/dts/mediatek/mt7981b.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7981b.dtsi
@@ -76,7 +76,7 @@
 			#reset-cells = <1>;
 		};
 
-		clock-controller@1001e000 {
+		apmixedsys: clock-controller@1001e000 {
 			compatible = "mediatek,mt7981-apmixedsys";
 			reg = <0 0x1001e000 0 0x1000>;
 			#clock-cells = <1>;
@@ -184,6 +184,31 @@
 			status = "disabled";
 		};
 
+		thermal@1100c800 {
+			compatible = "mediatek,mt7981-thermal",
+				     "mediatek,mt7986-thermal";
+			reg = <0 0x1100c800 0 0x800>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&infracfg CLK_INFRA_THERM_CK>,
+				 <&infracfg CLK_INFRA_ADC_26M_CK>;
+			clock-names = "therm", "auxadc";
+			nvmem-cells = <&thermal_calibration>;
+			nvmem-cell-names = "calibration-data";
+			#thermal-sensor-cells = <1>;
+			mediatek,auxadc = <&auxadc>;
+			mediatek,apmixedsys = <&apmixedsys>;
+		};
+
+		auxadc: adc@1100d000 {
+			compatible = "mediatek,mt7981-auxadc",
+				     "mediatek,mt7986-auxadc";
+			reg = <0 0x1100d000 0 0x1000>;
+			clocks = <&infracfg CLK_INFRA_ADC_26M_CK>;
+			clock-names = "main";
+			#io-channel-cells = <1>;
+			status = "disabled";
+		};
+
 		pio: pinctrl@11d00000 {
 			compatible = "mediatek,mt7981-pinctrl";
 			reg = <0 0x11d00000 0 0x1000>,
@@ -211,6 +236,10 @@
 			reg = <0 0x11f20000 0 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			thermal_calibration: thermal-calib@274 {
+				reg = <0x274 0xc>;
+			};
 		};
 
 		clock-controller@15000000 {
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts b/arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts
index 08b3b0827436..30805a610262 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-acelink-ew-7886cax.dts
@@ -98,8 +98,6 @@
 	flash@0 {
 		compatible = "spi-nand";
 		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
 		spi-max-frequency = <52000000>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <4>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
index ed79ad1ae871..e7654dc9a1c9 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dts
@@ -64,23 +64,19 @@
 	};
 
 	/* i2c of the left SFP cage (wan) */
-	i2c_sfp1: i2c-gpio-0 {
+	i2c_sfp1: i2c-0 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&pio 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&pio 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 	};
 
 	/* i2c of the right SFP cage (lan) */
-	i2c_sfp2: i2c-gpio-1 {
+	i2c_sfp2: i2c-1 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&pio 18 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		scl-gpios = <&pio 19 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		i2c-gpio,delay-us = <2>;
-		#address-cells = <1>;
-		#size-cells = <0>;
 	};
 
 	leds {
@@ -204,8 +200,9 @@
 		compatible = "mediatek,mt7531";
 		reg = <31>;
 		interrupt-controller;
+		interrupt-parent = <&pio>;
+		interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
 		#interrupt-cells = <1>;
-		interrupts-extended = <&pio 66 IRQ_TYPE_LEVEL_HIGH>;
 		reset-gpios = <&pio 5 GPIO_ACTIVE_HIGH>;
 	};
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
index 559990dcd1d1..a8972330a7b8 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986a.dtsi
@@ -428,16 +428,16 @@
 			};
 		};
 
-		pcie_phy: t-phy {
+		pcie_phy: t-phy@11c00000 {
 			compatible = "mediatek,mt7986-tphy",
 				     "mediatek,generic-tphy-v2";
-			ranges;
-			#address-cells = <2>;
-			#size-cells = <2>;
+			ranges = <0 0 0x11c00000 0x20000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
 			status = "disabled";
 
-			pcie_port: pcie-phy@11c00000 {
-				reg = <0 0x11c00000 0 0x20000>;
+			pcie_port: pcie-phy@0 {
+				reg = <0 0x20000>;
 				clocks = <&clk40m>;
 				clock-names = "ref";
 				#phy-cells = <1>;
@@ -523,11 +523,17 @@
 
 		eth: ethernet@15100000 {
 			compatible = "mediatek,mt7986-eth";
-			reg = <0 0x15100000 0 0x80000>;
+			reg = <0 0x15100000 0 0x40000>;
 			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "fe0", "fe1", "fe2", "fe3", "pdma0",
+					  "pdma1", "pdma2", "pdma3";
 			clocks = <&ethsys CLK_ETH_FE_EN>,
 				 <&ethsys CLK_ETH_GP2_EN>,
 				 <&ethsys CLK_ETH_GP1_EN>,
@@ -553,6 +559,7 @@
 					  <&topckgen CLK_TOP_SGM_325M_SEL>;
 			assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>,
 						 <&apmixedsys CLK_APMIXED_SGMPLL>;
+			sram = <&eth_sram>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			mediatek,ethsys = <&ethsys>;
@@ -562,6 +569,15 @@
 			status = "disabled";
 		};
 
+		/*15100000+0x40000*/
+		eth_sram: sram@15140000 {
+			compatible = "mmio-sram";
+			reg = <0 0x15140000 0 0x40000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x15140000 0 0x40000>;
+		};
+
 		wo_ccif0: syscon@151a5000 {
 			compatible = "mediatek,mt7986-wo-ccif", "syscon";
 			reg = <0 0x151a5000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-2g5.dts b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-2g5.dts
index 53de9c113f60..6f0c81e3fd94 100644
--- a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-2g5.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4-2g5.dts
@@ -9,3 +9,14 @@
 	model = "Banana Pi BPI-R4 (1x SFP+, 1x 2.5GbE)";
 	chassis-type = "embedded";
 };
+
+&gmac1 {
+	phy = <&int_2p5g_phy>;
+	phy-mode = "internal";
+	status = "okay";
+};
+
+&int_2p5g_phy {
+	pinctrl-0 = <&i2p5gbe_led0_pins>;
+	pinctrl-names = "i2p5gbe-led";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
index 36bd1ef2efab..4b3796ba82e3 100644
--- a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dts
@@ -8,6 +8,25 @@
 	compatible = "bananapi,bpi-r4", "mediatek,mt7988a";
 	model = "Banana Pi BPI-R4 (2x SFP+)";
 	chassis-type = "embedded";
+
+	/* SFP2 cage (LAN) */
+	sfp2: sfp2 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp2>;
+		maximum-power-milliwatt = <3000>;
+
+		los-gpios = <&pio 2 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&pio 83 GPIO_ACTIVE_LOW>;
+		rate-select0-gpios = <&pio 3 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&pio 0 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&pio 1 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&gmac1 {
+	managed = "in-band-status";
+	phy-mode = "usxgmii";
+	sfp = <&sfp2>;
 };
 
 &pca9545 {
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi
index 5fd222df440d..0ff69dae45d3 100644
--- a/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7988a-bananapi-bpi-r4.dtsi
@@ -5,10 +5,17 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/regulator/richtek,rt5190a-regulator.h>
+#include <dt-bindings/leds/common.h>
 
 #include "mt7988a.dtsi"
 
 / {
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		ethernet2 = &gmac2;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 	};
@@ -58,6 +65,19 @@
 		regulator-boot-on;
 		regulator-always-on;
 	};
+
+	/* SFP1 cage (WAN) */
+	sfp1: sfp1 {
+		compatible = "sff,sfp";
+		i2c-bus = <&i2c_sfp1>;
+		maximum-power-milliwatt = <3000>;
+
+		los-gpios = <&pio 54 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&pio 82 GPIO_ACTIVE_LOW>;
+		rate-select0-gpios = <&pio 21 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&pio 70 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&pio 69 GPIO_ACTIVE_HIGH>;
+	};
 };
 
 &cci {
@@ -128,6 +148,72 @@
 	};
 };
 
+&gmac2 {
+	managed = "in-band-status";
+	phy-mode = "usxgmii";
+	sfp = <&sfp1>;
+};
+
+&gsw_phy0 {
+	pinctrl-0 = <&gbe0_led0_pins>;
+	pinctrl-names = "gbe-led";
+};
+
+&gsw_phy0_led0 {
+	function = LED_FUNCTION_WAN;
+	color = <LED_COLOR_ID_GREEN>;
+	status = "okay";
+};
+
+&gsw_port0 {
+	label = "wan";
+};
+
+&gsw_phy1 {
+	pinctrl-0 = <&gbe1_led0_pins>;
+	pinctrl-names = "gbe-led";
+};
+
+&gsw_phy1_led0 {
+	function = LED_FUNCTION_LAN;
+	color = <LED_COLOR_ID_GREEN>;
+	status = "okay";
+};
+
+&gsw_port1 {
+	label = "lan1";
+};
+
+&gsw_phy2 {
+	pinctrl-0 = <&gbe2_led0_pins>;
+	pinctrl-names = "gbe-led";
+};
+
+&gsw_phy2_led0 {
+	function = LED_FUNCTION_LAN;
+	color = <LED_COLOR_ID_GREEN>;
+	status = "okay";
+};
+
+&gsw_port2 {
+	label = "lan2";
+};
+
+&gsw_phy3 {
+	pinctrl-0 = <&gbe3_led0_pins>;
+	pinctrl-names = "gbe-led";
+};
+
+&gsw_phy3_led0 {
+	function = LED_FUNCTION_LAN;
+	color = <LED_COLOR_ID_GREEN>;
+	status = "okay";
+};
+
+&gsw_port3 {
+	label = "lan3";
+};
+
 &i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&i2c0_pins>;
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
index 560ec86dbec0..366203a72d6d 100644
--- a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
@@ -680,7 +680,28 @@
 			};
 		};
 
-		clock-controller@11f40000 {
+		xfi_tphy0: phy@11f20000 {
+			compatible = "mediatek,mt7988-xfi-tphy";
+			reg = <0 0x11f20000 0 0x10000>;
+			clocks = <&xfi_pll CLK_XFIPLL_PLL_EN>,
+				 <&topckgen CLK_TOP_XFI_PHY_0_XTAL_SEL>;
+			clock-names = "xfipll", "topxtal";
+			resets = <&watchdog 14>;
+			mediatek,usxgmii-performance-errata;
+			#phy-cells = <0>;
+		};
+
+		xfi_tphy1: phy@11f30000 {
+			compatible = "mediatek,mt7988-xfi-tphy";
+			reg = <0 0x11f30000 0 0x10000>;
+			clocks = <&xfi_pll CLK_XFIPLL_PLL_EN>,
+				 <&topckgen CLK_TOP_XFI_PHY_1_XTAL_SEL>;
+			clock-names = "xfipll", "topxtal";
+			resets = <&watchdog 15>;
+			#phy-cells = <0>;
+		};
+
+		xfi_pll: clock-controller@11f40000 {
 			compatible = "mediatek,mt7988-xfi-pll";
 			reg = <0 0x11f40000 0 0x1000>;
 			resets = <&watchdog 16>;
@@ -714,19 +735,277 @@
 			};
 		};
 
-		clock-controller@15000000 {
+		ethsys: clock-controller@15000000 {
 			compatible = "mediatek,mt7988-ethsys", "syscon";
 			reg = <0 0x15000000 0 0x1000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 		};
 
-		clock-controller@15031000 {
+		switch: switch@15020000 {
+			compatible = "mediatek,mt7988-switch";
+			reg = <0 0x15020000 0 0x8000>;
+			interrupt-controller;
+			#interrupt-cells = <1>;
+			interrupts = <GIC_SPI 209 IRQ_TYPE_LEVEL_HIGH>;
+			resets = <&ethwarp MT7988_ETHWARP_RST_SWITCH>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				gsw_port0: port@0 {
+					reg = <0>;
+					phy-handle = <&gsw_phy0>;
+					phy-mode = "internal";
+				};
+
+				gsw_port1: port@1 {
+					reg = <1>;
+					phy-handle = <&gsw_phy1>;
+					phy-mode = "internal";
+				};
+
+				gsw_port2: port@2 {
+					reg = <2>;
+					phy-handle = <&gsw_phy2>;
+					phy-mode = "internal";
+				};
+
+				gsw_port3: port@3 {
+					reg = <3>;
+					phy-handle = <&gsw_phy3>;
+					phy-mode = "internal";
+				};
+
+				port@6 {
+					reg = <6>;
+					ethernet = <&gmac0>;
+					phy-mode = "internal";
+
+					fixed-link {
+						speed = <10000>;
+						full-duplex;
+						pause;
+					};
+				};
+			};
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				mediatek,pio = <&pio>;
+
+				gsw_phy0: ethernet-phy@0 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <0>;
+					interrupts = <0>;
+					nvmem-cells = <&phy_calibration_p0>;
+					nvmem-cell-names = "phy-cal-data";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						gsw_phy0_led0: led@0 {
+							reg = <0>;
+							status = "disabled";
+						};
+
+						gsw_phy0_led1: led@1 {
+							reg = <1>;
+							status = "disabled";
+						};
+					};
+				};
+
+				gsw_phy1: ethernet-phy@1 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <1>;
+					interrupts = <1>;
+					nvmem-cells = <&phy_calibration_p1>;
+					nvmem-cell-names = "phy-cal-data";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						gsw_phy1_led0: led@0 {
+							reg = <0>;
+							status = "disabled";
+						};
+
+						gsw_phy1_led1: led@1 {
+							reg = <1>;
+							status = "disabled";
+						};
+					};
+				};
+
+				gsw_phy2: ethernet-phy@2 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <2>;
+					interrupts = <2>;
+					nvmem-cells = <&phy_calibration_p2>;
+					nvmem-cell-names = "phy-cal-data";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						gsw_phy2_led0: led@0 {
+							reg = <0>;
+							status = "disabled";
+						};
+
+						gsw_phy2_led1: led@1 {
+							reg = <1>;
+							status = "disabled";
+						};
+					};
+				};
+
+				gsw_phy3: ethernet-phy@3 {
+					compatible = "ethernet-phy-ieee802.3-c22";
+					reg = <3>;
+					interrupts = <3>;
+					nvmem-cells = <&phy_calibration_p3>;
+					nvmem-cell-names = "phy-cal-data";
+
+					leds {
+						#address-cells = <1>;
+						#size-cells = <0>;
+
+						gsw_phy3_led0: led@0 {
+							reg = <0>;
+							status = "disabled";
+						};
+
+						gsw_phy3_led1: led@1 {
+							reg = <1>;
+							status = "disabled";
+						};
+					};
+				};
+			};
+		};
+
+		ethwarp: clock-controller@15031000 {
 			compatible = "mediatek,mt7988-ethwarp";
 			reg = <0 0x15031000 0 0x1000>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 		};
+
+		eth: ethernet@15100000 {
+			compatible = "mediatek,mt7988-eth";
+			reg = <0 0x15100000 0 0x40000>;
+			interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "fe0", "fe1", "fe2", "fe3", "pdma0",
+					  "pdma1", "pdma2", "pdma3";
+			clocks = <&ethsys CLK_ETHDMA_CRYPT0_EN>,
+				 <&ethsys CLK_ETHDMA_FE_EN>,
+				 <&ethsys CLK_ETHDMA_GP2_EN>,
+				 <&ethsys CLK_ETHDMA_GP1_EN>,
+				 <&ethsys CLK_ETHDMA_GP3_EN>,
+				 <&ethwarp CLK_ETHWARP_WOCPU2_EN>,
+				 <&ethwarp CLK_ETHWARP_WOCPU1_EN>,
+				 <&ethwarp CLK_ETHWARP_WOCPU0_EN>,
+				 <&ethsys CLK_ETHDMA_ESW_EN>,
+				 <&topckgen CLK_TOP_ETH_GMII_SEL>,
+				 <&topckgen CLK_TOP_ETH_REFCK_50M_SEL>,
+				 <&topckgen CLK_TOP_ETH_SYS_200M_SEL>,
+				 <&topckgen CLK_TOP_ETH_SYS_SEL>,
+				 <&topckgen CLK_TOP_ETH_XGMII_SEL>,
+				 <&topckgen CLK_TOP_ETH_MII_SEL>,
+				 <&topckgen CLK_TOP_NETSYS_SEL>,
+				 <&topckgen CLK_TOP_NETSYS_500M_SEL>,
+				 <&topckgen CLK_TOP_NETSYS_PAO_2X_SEL>,
+				 <&topckgen CLK_TOP_NETSYS_SYNC_250M_SEL>,
+				 <&topckgen CLK_TOP_NETSYS_PPEFB_250M_SEL>,
+				 <&topckgen CLK_TOP_NETSYS_WARP_SEL>,
+				 <&ethsys CLK_ETHDMA_XGP1_EN>,
+				 <&ethsys CLK_ETHDMA_XGP2_EN>,
+				 <&ethsys CLK_ETHDMA_XGP3_EN>;
+			clock-names = "crypto", "fe", "gp2", "gp1", "gp3",
+				      "ethwarp_wocpu2", "ethwarp_wocpu1",
+				      "ethwarp_wocpu0", "esw", "top_eth_gmii_sel",
+				      "top_eth_refck_50m_sel", "top_eth_sys_200m_sel",
+				      "top_eth_sys_sel", "top_eth_xgmii_sel",
+				      "top_eth_mii_sel", "top_netsys_sel",
+				      "top_netsys_500m_sel", "top_netsys_pao_2x_sel",
+				      "top_netsys_sync_250m_sel",
+				      "top_netsys_ppefb_250m_sel",
+				      "top_netsys_warp_sel","xgp1", "xgp2", "xgp3";
+			assigned-clocks = <&topckgen CLK_TOP_NETSYS_2X_SEL>,
+					  <&topckgen CLK_TOP_NETSYS_GSW_SEL>,
+					  <&topckgen CLK_TOP_USXGMII_SBUS_0_SEL>,
+					  <&topckgen CLK_TOP_USXGMII_SBUS_1_SEL>,
+					  <&topckgen CLK_TOP_SGM_0_SEL>,
+					  <&topckgen CLK_TOP_SGM_1_SEL>;
+			assigned-clock-parents = <&apmixedsys CLK_APMIXED_NET2PLL>,
+						 <&topckgen CLK_TOP_NET1PLL_D4>,
+						 <&topckgen CLK_TOP_NET1PLL_D8_D4>,
+						 <&topckgen CLK_TOP_NET1PLL_D8_D4>,
+						 <&apmixedsys CLK_APMIXED_SGMPLL>,
+						 <&apmixedsys CLK_APMIXED_SGMPLL>;
+			sram = <&eth_sram>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			mediatek,ethsys = <&ethsys>;
+			mediatek,infracfg = <&topmisc>;
+
+			gmac0: mac@0 {
+				compatible = "mediatek,eth-mac";
+				reg = <0>;
+				phy-mode = "internal";
+
+				/* Connected to internal switch */
+				fixed-link {
+					speed = <10000>;
+					full-duplex;
+					pause;
+				};
+			};
+
+			gmac1: mac@1 {
+				compatible = "mediatek,eth-mac";
+				reg = <1>;
+				status = "disabled";
+			};
+
+			gmac2: mac@2 {
+				compatible = "mediatek,eth-mac";
+				reg = <2>;
+				status = "disabled";
+			};
+
+			mdio_bus: mdio-bus {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				/* internal 2.5G PHY */
+				int_2p5g_phy: ethernet-phy@15 {
+					compatible = "ethernet-phy-ieee802.3-c45";
+					reg = <15>;
+				};
+			};
+		};
+
+		eth_sram: sram@15400000 {
+			compatible = "mmio-sram";
+			reg = <0 0x15400000 0 0x200000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			ranges = <0 0x15400000 0 0x200000>;
+		};
 	};
 
 	thermal-zones {
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi
index 586eee79c73c..f69ffcb9792a 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-da7219.dtsi
@@ -39,8 +39,8 @@
 };
 
 &pio {
-	da7219_pins: da7219_pins {
-		pins1 {
+	da7219_pins: da7219-pins {
+		pins-intn {
 			pinmux = <PINMUX_GPIO165__FUNC_GPIO165>;
 			input-enable;
 			bias-pull-up;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi
index 548e22c194a2..c4aedf8cbfcd 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-audio-ts3a227e.dtsi
@@ -17,7 +17,7 @@
 };
 
 &pio {
-	ts3a227e_pins: ts3a227e_pins {
+	ts3a227e_pins: ts3a227e-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO157__FUNC_GPIO157>;
 			input-enable;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
index 80888bd4ad82..1b74ec171c10 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-jacuzzi.dtsi
@@ -93,11 +93,6 @@
 	};
 };
 
-&dsi0 {
-	status = "okay";
-	/delete-node/panel@0;
-};
-
 &dsi_out {
 	remote-endpoint = <&anx7625_in>;
 };
@@ -395,14 +390,14 @@
 		"",
 		"";
 
-	pp1000_mipibrdg_en: pp1000-mipibrdg-en {
+	pp1000_mipibrdg_en: pp1000-mipibrdg-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO54__FUNC_GPIO54>;
 			output-low;
 		};
 	};
 
-	pp1800_mipibrdg_en: pp1800-mipibrdg-en {
+	pp1800_mipibrdg_en: pp1800-mipibrdg-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO36__FUNC_GPIO36>;
 			output-low;
@@ -410,20 +405,20 @@
 	};
 
 	pp3300_panel_pins: pp3300-panel-pins {
-		panel_3v3_enable: panel-3v3-enable {
+		panel_3v3_enable: pins-panel-en {
 			pinmux = <PINMUX_GPIO35__FUNC_GPIO35>;
 			output-low;
 		};
 	};
 
-	ppvarp_lcd_en: ppvarp-lcd-en {
+	ppvarp_lcd_en: ppvarp-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO66__FUNC_GPIO66>;
 			output-low;
 		};
 	};
 
-	ppvarn_lcd_en: ppvarn-lcd-en {
+	ppvarn_lcd_en: ppvarn-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO166__FUNC_GPIO166>;
 			output-low;
@@ -444,27 +439,27 @@
 	};
 
 	touchscreen_pins: touchscreen-pins {
-		touch-int-odl {
+		pins-intn {
 			pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
 			input-enable;
 			bias-pull-up;
 		};
 
-		touch-rst-l {
+		pins-rst {
 			pinmux = <PINMUX_GPIO156__FUNC_GPIO156>;
 			output-high;
 		};
 	};
 
 	trackpad_pins: trackpad-pins {
-		trackpad-int {
+		pins-intn {
 			pinmux = <PINMUX_GPIO7__FUNC_GPIO7>;
 			input-enable;
 			bias-disable; /* pulled externally */
 		};
 	};
 
-	pp3300_mipibrdg_en: pp3300-mipibrdg-en {
+	pp3300_mipibrdg_en: pp3300-mipibrdg-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO37__FUNC_GPIO37>;
 			output-low;
@@ -472,13 +467,13 @@
 	};
 
 	volume_button_pins: volume-button-pins {
-		voldn-btn-odl {
+		pins-voldn {
 			pinmux = <PINMUX_GPIO6__FUNC_GPIO6>;
 			input-enable;
 			bias-pull-up;
 		};
 
-		volup-btn-odl {
+		pins-volup {
 			pinmux = <PINMUX_GPIO5__FUNC_GPIO5>;
 			input-enable;
 			bias-pull-up;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
index ff02f63bac29..d71972c94e42 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kakadu.dtsi
@@ -61,6 +61,33 @@
 	firmware-name = "nvm_00440302_i2s_eu.bin";
 };
 
+&dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	panel: panel@0 {
+		/* compatible will be set in board dts */
+		reg = <0>;
+		enable-gpios = <&pio 45 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_pins_default>;
+		avdd-supply = <&ppvarn_lcd>;
+		avee-supply = <&ppvarp_lcd>;
+		pp1800-supply = <&pp1800_lcd>;
+		backlight = <&backlight_lcd0>;
+		rotation = <270>;
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
+&dsi_out {
+	remote-endpoint = <&panel_in>;
+};
+
 &i2c0 {
 	status = "okay";
 };
@@ -304,35 +331,35 @@
 		"",
 		"";
 
-	ppvarp_lcd_en: ppvarp-lcd-en {
+	ppvarp_lcd_en: ppvarp-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO66__FUNC_GPIO66>;
 			output-low;
 		};
 	};
 
-	ppvarn_lcd_en: ppvarn-lcd-en {
+	ppvarn_lcd_en: ppvarn-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO166__FUNC_GPIO166>;
 			output-low;
 		};
 	};
 
-	pp1800_lcd_en: pp1800-lcd-en {
+	pp1800_lcd_en: pp1800-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO36__FUNC_GPIO36>;
 			output-low;
 		};
 	};
 
-	open_touch: open_touch {
-		irq_pin {
+	open_touch: opentouch-pins {
+		pins-intn {
 			pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
 			input-enable;
 			bias-pull-up;
 		};
 
-		rst_pin {
+		pins-rst {
 			pinmux = <PINMUX_GPIO156__FUNC_GPIO156>;
 
 			/*
@@ -349,8 +376,8 @@
 		};
 	};
 
-	pen_eject: peneject {
-		pen_eject {
+	pen_eject: pen-pins {
+		pins-eject {
 			pinmux = <PINMUX_GPIO6__FUNC_GPIO6>;
 			input-enable;
 			/* External pull-up. */
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
index da6e767b4cee..b702ff066636 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-kodama.dtsi
@@ -42,6 +42,34 @@
 	};
 };
 
+&dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel: panel@0 {
+		/* compatible will be set in board dts */
+		reg = <0>;
+		enable-gpios = <&pio 45 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_pins_default>;
+		avdd-supply = <&ppvarn_lcd>;
+		avee-supply = <&ppvarp_lcd>;
+		pp1800-supply = <&pp1800_lcd>;
+		backlight = <&backlight_lcd0>;
+		rotation = <270>;
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
+&dsi_out {
+	remote-endpoint = <&panel_in>;
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -292,35 +320,35 @@
 		"",
 		"";
 
-	ppvarp_lcd_en: ppvarp-lcd-en {
+	ppvarp_lcd_en: ppvarp-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO66__FUNC_GPIO66>;
 			output-low;
 		};
 	};
 
-	ppvarn_lcd_en: ppvarn-lcd-en {
+	ppvarn_lcd_en: ppvarn-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO166__FUNC_GPIO166>;
 			output-low;
 		};
 	};
 
-	pp1800_lcd_en: pp1800-lcd-en {
+	pp1800_lcd_en: pp1800-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO36__FUNC_GPIO36>;
 			output-low;
 		};
 	};
 
-	touch_default: touchdefault {
-		pin_irq {
+	touch_default: touch-pins {
+		pins-intn {
 			pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
 			input-enable;
 			bias-pull-up;
 		};
 
-		touch_pin_reset: pin_reset {
+		touch_pin_reset: pins-rst {
 			pinmux = <PINMUX_GPIO156__FUNC_GPIO156>;
 
 			/*
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
index 8b56b8564ed7..b6cfcafd8b06 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui-krane.dtsi
@@ -45,6 +45,34 @@
 	firmware-name = "nvm_00440302_i2s_eu.bin";
 };
 
+&dsi0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	panel: panel@0 {
+		/* compatible will be set in board dts */
+		reg = <0>;
+		enable-gpios = <&pio 45 0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&panel_pins_default>;
+		avdd-supply = <&ppvarn_lcd>;
+		avee-supply = <&ppvarp_lcd>;
+		pp1800-supply = <&pp1800_lcd>;
+		backlight = <&backlight_lcd0>;
+		rotation = <270>;
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&dsi_out>;
+			};
+		};
+	};
+};
+
+&dsi_out {
+	remote-endpoint = <&panel_in>;
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -296,35 +324,35 @@
 		"",
 		"";
 
-	ppvarp_lcd_en: ppvarp-lcd-en {
+	ppvarp_lcd_en: ppvarp-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO66__FUNC_GPIO66>;
 			output-low;
 		};
 	};
 
-	ppvarn_lcd_en: ppvarn-lcd-en {
+	ppvarn_lcd_en: ppvarn-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO166__FUNC_GPIO166>;
 			output-low;
 		};
 	};
 
-	pp1800_lcd_en: pp1800-lcd-en {
+	pp1800_lcd_en: pp1800-lcd-en-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO36__FUNC_GPIO36>;
 			output-low;
 		};
 	};
 
-	open_touch: open_touch {
-		irq_pin {
+	open_touch: opentouch-pins {
+		pins-intn {
 			pinmux = <PINMUX_GPIO155__FUNC_GPIO155>;
 			input-enable;
 			bias-pull-up;
 		};
 
-		rst_pin {
+		pins-rst {
 			pinmux = <PINMUX_GPIO156__FUNC_GPIO156>;
 
 			/*
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
index 400c61d11035..4b87d4940c8c 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183-kukui.dtsi
@@ -252,29 +252,6 @@
 
 &dsi0 {
 	status = "okay";
-	#address-cells = <1>;
-	#size-cells = <0>;
-	panel: panel@0 {
-		/* compatible will be set in board dts */
-		reg = <0>;
-		enable-gpios = <&pio 45 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&panel_pins_default>;
-		avdd-supply = <&ppvarn_lcd>;
-		avee-supply = <&ppvarp_lcd>;
-		pp1800-supply = <&pp1800_lcd>;
-		backlight = <&backlight_lcd0>;
-		rotation = <270>;
-		port {
-			panel_in: endpoint {
-				remote-endpoint = <&dsi_out>;
-			};
-		};
-	};
-};
-
-&dsi_out {
-	remote-endpoint = <&panel_in>;
 };
 
 &gic {
@@ -435,7 +412,7 @@
 };
 
 &pio {
-	aud_pins_default: audiopins {
+	aud_pins_default: audio-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO97__FUNC_I2S2_MCK>,
 				<PINMUX_GPIO98__FUNC_I2S2_BCK>,
@@ -457,7 +434,7 @@
 		};
 	};
 
-	aud_pins_tdm_out_on: audiotdmouton {
+	aud_pins_tdm_out_on: audio-tdmout-on-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO169__FUNC_TDM_BCK_2ND>,
 				<PINMUX_GPIO170__FUNC_TDM_LRCK_2ND>,
@@ -469,7 +446,7 @@
 		};
 	};
 
-	aud_pins_tdm_out_off: audiotdmoutoff {
+	aud_pins_tdm_out_off: audio-tdmout-off-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO169__FUNC_GPIO169>,
 				<PINMUX_GPIO170__FUNC_GPIO170>,
@@ -490,22 +467,22 @@
 		};
 	};
 
-	ec_ap_int_odl: ec-ap-int-odl {
-		pins1 {
+	ec_ap_int_odl: ec-ap-int-odl-pins {
+		pins-intn {
 			pinmux = <PINMUX_GPIO151__FUNC_GPIO151>;
 			input-enable;
 			bias-pull-up;
 		};
 	};
 
-	h1_int_od_l: h1-int-od-l {
-		pins1 {
+	h1_int_od_l: h1-int-od-l-pins {
+		pins-intn {
 			pinmux = <PINMUX_GPIO153__FUNC_GPIO153>;
 			input-enable;
 		};
 	};
 
-	i2c0_pins: i2c0 {
+	i2c0_pins: i2c0-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO82__FUNC_SDA0>,
 				 <PINMUX_GPIO83__FUNC_SCL0>;
@@ -513,7 +490,7 @@
 		};
 	};
 
-	i2c1_pins: i2c1 {
+	i2c1_pins: i2c1-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO81__FUNC_SDA1>,
 				 <PINMUX_GPIO84__FUNC_SCL1>;
@@ -521,7 +498,7 @@
 		};
 	};
 
-	i2c2_pins: i2c2 {
+	i2c2_pins: i2c2-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO103__FUNC_SCL2>,
 				 <PINMUX_GPIO104__FUNC_SDA2>;
@@ -529,7 +506,7 @@
 		};
 	};
 
-	i2c3_pins: i2c3 {
+	i2c3_pins: i2c3-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO50__FUNC_SCL3>,
 				 <PINMUX_GPIO51__FUNC_SDA3>;
@@ -537,7 +514,7 @@
 		};
 	};
 
-	i2c4_pins: i2c4 {
+	i2c4_pins: i2c4-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO105__FUNC_SCL4>,
 				 <PINMUX_GPIO106__FUNC_SDA4>;
@@ -545,7 +522,7 @@
 		};
 	};
 
-	i2c5_pins: i2c5 {
+	i2c5_pins: i2c5-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO48__FUNC_SCL5>,
 				 <PINMUX_GPIO49__FUNC_SDA5>;
@@ -553,7 +530,7 @@
 		};
 	};
 
-	i2c6_pins: i2c6 {
+	i2c6_pins: i2c6-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO11__FUNC_SCL6>,
 				 <PINMUX_GPIO12__FUNC_SDA6>;
@@ -561,7 +538,7 @@
 		};
 	};
 
-	mmc0_pins_default: mmc0-pins-default {
+	mmc0_pins_default: mmc0-default-pins {
 		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO123__FUNC_MSDC0_DAT0>,
 				 <PINMUX_GPIO128__FUNC_MSDC0_DAT1>,
@@ -580,7 +557,7 @@
 		pins-clk {
 			pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
 			drive-strength = <MTK_DRIVE_14mA>;
-			mediatek,pull-down-adv = <10>;
+			mediatek,pull-down-adv = <2>;
 		};
 
 		pins-rst {
@@ -609,13 +586,13 @@
 		pins-clk {
 			pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
 			drive-strength = <MTK_DRIVE_14mA>;
-			mediatek,pull-down-adv = <10>;
+			mediatek,pull-down-adv = <2>;
 		};
 
 		pins-ds {
 			pinmux = <PINMUX_GPIO131__FUNC_MSDC0_DSL>;
 			drive-strength = <MTK_DRIVE_14mA>;
-			mediatek,pull-down-adv = <10>;
+			mediatek,pull-down-adv = <2>;
 		};
 
 		pins-rst {
@@ -625,7 +602,7 @@
 		};
 	};
 
-	mmc1_pins_default: mmc1-pins-default {
+	mmc1_pins_default: mmc1-default-pins {
 		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>,
 				 <PINMUX_GPIO32__FUNC_MSDC1_DAT0>,
@@ -633,17 +610,17 @@
 				 <PINMUX_GPIO33__FUNC_MSDC1_DAT2>,
 				 <PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
 			input-enable;
-			mediatek,pull-up-adv = <10>;
+			mediatek,pull-up-adv = <2>;
 		};
 
 		pins-clk {
 			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
 			input-enable;
-			mediatek,pull-down-adv = <10>;
+			mediatek,pull-down-adv = <2>;
 		};
 	};
 
-	mmc1_pins_uhs: mmc1-pins-uhs {
+	mmc1_pins_uhs: mmc1-uhs-pins {
 		pins-cmd-dat {
 			pinmux = <PINMUX_GPIO31__FUNC_MSDC1_CMD>,
 				 <PINMUX_GPIO32__FUNC_MSDC1_DAT0>,
@@ -652,26 +629,26 @@
 				 <PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
 			drive-strength = <6>;
 			input-enable;
-			mediatek,pull-up-adv = <10>;
+			mediatek,pull-up-adv = <2>;
 		};
 
 		pins-clk {
 			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
 			drive-strength = <8>;
-			mediatek,pull-down-adv = <10>;
+			mediatek,pull-down-adv = <2>;
 			input-enable;
 		};
 	};
 
-	panel_pins_default: panel-pins-default {
-		panel-reset {
+	panel_pins_default: panel-pins {
+		pins-panel-reset {
 			pinmux = <PINMUX_GPIO45__FUNC_GPIO45>;
 			output-low;
 			bias-pull-up;
 		};
 	};
 
-	pwm0_pin_default: pwm0-pin-default {
+	pwm0_pin_default: pwm0-pins {
 		pins1 {
 			pinmux = <PINMUX_GPIO176__FUNC_GPIO176>;
 			output-high;
@@ -682,15 +659,15 @@
 		};
 	};
 
-	scp_pins: scp {
+	scp_pins: scp-pins {
 		pins-scp-uart {
 			pinmux = <PINMUX_GPIO110__FUNC_TP_URXD1_AO>,
 				 <PINMUX_GPIO112__FUNC_TP_UTXD1_AO>;
 		};
 	};
 
-	spi0_pins: spi0 {
-		pins-spi {
+	spi0_pins: spi0-pins {
+		pins-bus {
 			pinmux = <PINMUX_GPIO85__FUNC_SPI0_MI>,
 				 <PINMUX_GPIO86__FUNC_GPIO86>,
 				 <PINMUX_GPIO87__FUNC_SPI0_MO>,
@@ -699,8 +676,8 @@
 		};
 	};
 
-	spi1_pins: spi1 {
-		pins-spi {
+	spi1_pins: spi1-pins {
+		pins-bus {
 			pinmux = <PINMUX_GPIO161__FUNC_SPI1_A_MI>,
 				 <PINMUX_GPIO162__FUNC_SPI1_A_CSB>,
 				 <PINMUX_GPIO163__FUNC_SPI1_A_MO>,
@@ -709,21 +686,21 @@
 		};
 	};
 
-	spi2_pins: spi2 {
-		pins-spi {
+	spi2_pins: spi2-pins {
+		pins-bus {
 			pinmux = <PINMUX_GPIO0__FUNC_SPI2_CSB>,
 				 <PINMUX_GPIO1__FUNC_SPI2_MO>,
 				 <PINMUX_GPIO2__FUNC_SPI2_CLK>;
 			bias-disable;
 		};
-		pins-spi-mi {
+		pins-miso {
 			pinmux = <PINMUX_GPIO94__FUNC_SPI2_MI>;
 			mediatek,pull-down-adv = <00>;
 		};
 	};
 
-	spi3_pins: spi3 {
-		pins-spi {
+	spi3_pins: spi3-pins {
+		pins-bus {
 			pinmux = <PINMUX_GPIO21__FUNC_SPI3_MI>,
 				 <PINMUX_GPIO22__FUNC_SPI3_CSB>,
 				 <PINMUX_GPIO23__FUNC_SPI3_MO>,
@@ -732,8 +709,8 @@
 		};
 	};
 
-	spi4_pins: spi4 {
-		pins-spi {
+	spi4_pins: spi4-pins {
+		pins-bus {
 			pinmux = <PINMUX_GPIO17__FUNC_SPI4_MI>,
 				 <PINMUX_GPIO18__FUNC_SPI4_CSB>,
 				 <PINMUX_GPIO19__FUNC_SPI4_MO>,
@@ -742,8 +719,8 @@
 		};
 	};
 
-	spi5_pins: spi5 {
-		pins-spi {
+	spi5_pins: spi5-pins {
+		pins-bus {
 			pinmux = <PINMUX_GPIO13__FUNC_SPI5_MI>,
 				 <PINMUX_GPIO14__FUNC_SPI5_CSB>,
 				 <PINMUX_GPIO15__FUNC_SPI5_MO>,
@@ -752,7 +729,7 @@
 		};
 	};
 
-	uart0_pins_default: uart0-pins-default {
+	uart0_pins_default: uart0-pins {
 		pins-rx {
 			pinmux = <PINMUX_GPIO95__FUNC_URXD0>;
 			input-enable;
@@ -763,7 +740,7 @@
 		};
 	};
 
-	uart1_pins_default: uart1-pins-default {
+	uart1_pins_default: uart1-pins {
 		pins-rx {
 			pinmux = <PINMUX_GPIO121__FUNC_URXD1>;
 			input-enable;
@@ -781,7 +758,7 @@
 		};
 	};
 
-	uart1_pins_sleep: uart1-pins-sleep {
+	uart1_pins_sleep: uart1-sleep-pins {
 		pins-rx {
 			pinmux = <PINMUX_GPIO121__FUNC_GPIO121>;
 			input-enable;
@@ -799,14 +776,14 @@
 		};
 	};
 
-	wifi_pins_pwrseq: wifi-pins-pwrseq {
+	wifi_pins_pwrseq: wifi-pwr-pins {
 		pins-wifi-enable {
 			pinmux = <PINMUX_GPIO119__FUNC_GPIO119>;
 			output-low;
 		};
 	};
 
-	wifi_pins_wakeup: wifi-pins-wakeup {
+	wifi_pins_wakeup: wifi-wake-pins {
 		pins-wifi-wakeup {
 			pinmux = <PINMUX_GPIO113__FUNC_GPIO113>;
 			input-enable;
diff --git a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
index dbdee604edab..f60ef3e53a09 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8183-pumpkin.dts
@@ -324,7 +324,7 @@
 		pins_clk {
 			pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
 			drive-strength = <MTK_DRIVE_14mA>;
-			mediatek,pull-down-adv = <10>;
+			mediatek,pull-down-adv = <2>;
 		};
 
 		pins_rst {
@@ -353,13 +353,13 @@
 		pins_clk {
 			pinmux = <PINMUX_GPIO124__FUNC_MSDC0_CLK>;
 			drive-strength = <MTK_DRIVE_14mA>;
-			mediatek,pull-down-adv = <10>;
+			mediatek,pull-down-adv = <2>;
 		};
 
 		pins_ds {
 			pinmux = <PINMUX_GPIO131__FUNC_MSDC0_DSL>;
 			drive-strength = <MTK_DRIVE_14mA>;
-			mediatek,pull-down-adv = <10>;
+			mediatek,pull-down-adv = <2>;
 		};
 
 		pins_rst {
@@ -377,13 +377,13 @@
 				 <PINMUX_GPIO33__FUNC_MSDC1_DAT2>,
 				 <PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
 			input-enable;
-			mediatek,pull-up-adv = <10>;
+			mediatek,pull-up-adv = <2>;
 		};
 
 		pins_clk {
 			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
 			input-enable;
-			mediatek,pull-down-adv = <10>;
+			mediatek,pull-down-adv = <2>;
 		};
 
 		pins_pmu {
@@ -401,13 +401,13 @@
 				 <PINMUX_GPIO30__FUNC_MSDC1_DAT3>;
 			drive-strength = <6>;
 			input-enable;
-			mediatek,pull-up-adv = <10>;
+			mediatek,pull-up-adv = <2>;
 		};
 
 		pins_clk {
 			pinmux = <PINMUX_GPIO29__FUNC_MSDC1_CLK>;
 			drive-strength = <8>;
-			mediatek,pull-down-adv = <10>;
+			mediatek,pull-down-adv = <2>;
 			input-enable;
 		};
 	};
@@ -482,6 +482,10 @@
 	domain-supply = <&mt6358_vgpu_reg>;
 };
 
+&cci {
+	proc-supply = <&mt6358_vproc12_reg>;
+};
+
 &cpu0 {
 	proc-supply = <&mt6358_vproc12_reg>;
 };
@@ -527,10 +531,8 @@
 	pinctrl-0 = <&dpi_func_pins>;
 	pinctrl-1 = <&dpi_idle_pins>;
 	status = "okay";
+};
 
-	port {
-		dpi_out: endpoint {
-			remote-endpoint = <&it66121_in>;
-		};
-	};
+&dpi_out {
+	remote-endpoint = <&it66121_in>;
 };
diff --git a/arch/arm64/boot/dts/mediatek/mt8183.dtsi b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
index 3c1fe80e64b9..960d8955d018 100644
--- a/arch/arm64/boot/dts/mediatek/mt8183.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8183.dtsi
@@ -1667,6 +1667,21 @@
 			mboxes = <&gce 0 CMDQ_THR_PRIO_HIGHEST>,
 				 <&gce 1 CMDQ_THR_PRIO_HIGHEST>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0 0x1000>;
+
+			port {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				mmsys_ep_main: endpoint@0 {
+					reg = <0>;
+					remote-endpoint = <&ovl0_in>;
+				};
+
+				mmsys_ep_ext: endpoint@1 {
+					reg = <1>;
+					remote-endpoint = <&ovl_2l1_in>;
+				};
+			};
 		};
 
 		dma-controller0@14001000 {
@@ -1733,6 +1748,25 @@
 			clocks = <&mmsys CLK_MM_DISP_OVL0>;
 			iommus = <&iommu M4U_PORT_DISP_OVL0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x8000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					ovl0_in: endpoint {
+						remote-endpoint = <&mmsys_ep_main>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					ovl0_out: endpoint {
+						remote-endpoint = <&ovl_2l0_in>;
+					};
+				};
+			};
 		};
 
 		ovl_2l0: ovl@14009000 {
@@ -1743,6 +1777,25 @@
 			clocks = <&mmsys CLK_MM_DISP_OVL0_2L>;
 			iommus = <&iommu M4U_PORT_DISP_2L_OVL0_LARB0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x9000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					ovl_2l0_in: endpoint {
+						remote-endpoint = <&ovl0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					ovl_2l0_out: endpoint {
+						remote-endpoint = <&rdma0_in>;
+					};
+				};
+			};
 		};
 
 		ovl_2l1: ovl@1400a000 {
@@ -1753,6 +1806,25 @@
 			clocks = <&mmsys CLK_MM_DISP_OVL1_2L>;
 			iommus = <&iommu M4U_PORT_DISP_2L_OVL1_LARB0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xa000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					ovl_2l1_in: endpoint {
+						remote-endpoint = <&mmsys_ep_ext>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					ovl_2l1_out: endpoint {
+						remote-endpoint = <&rdma1_in>;
+					};
+				};
+			};
 		};
 
 		rdma0: rdma@1400b000 {
@@ -1764,6 +1836,25 @@
 			iommus = <&iommu M4U_PORT_DISP_RDMA0>;
 			mediatek,rdma-fifo-size = <5120>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xb000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					rdma0_in: endpoint {
+						remote-endpoint = <&ovl_2l0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					rdma0_out: endpoint {
+						remote-endpoint = <&color0_in>;
+					};
+				};
+			};
 		};
 
 		rdma1: rdma@1400c000 {
@@ -1775,6 +1866,25 @@
 			iommus = <&iommu M4U_PORT_DISP_RDMA1>;
 			mediatek,rdma-fifo-size = <2048>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xc000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					rdma1_in: endpoint {
+						remote-endpoint = <&ovl_2l1_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					rdma1_out: endpoint {
+						remote-endpoint = <&dpi_in>;
+					};
+				};
+			};
 		};
 
 		color0: color@1400e000 {
@@ -1785,6 +1895,25 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_COLOR0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xe000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					color0_in: endpoint {
+						remote-endpoint = <&rdma0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					color0_out: endpoint {
+						remote-endpoint = <&ccorr0_in>;
+					};
+				};
+			};
 		};
 
 		ccorr0: ccorr@1400f000 {
@@ -1794,6 +1923,25 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_CCORR0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0xf000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					ccorr0_in: endpoint {
+						remote-endpoint = <&color0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					ccorr0_out: endpoint {
+						remote-endpoint = <&aal0_in>;
+					};
+				};
+			};
 		};
 
 		aal0: aal@14010000 {
@@ -1803,6 +1951,25 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_AAL0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					aal0_in: endpoint {
+						remote-endpoint = <&ccorr0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					aal0_out: endpoint {
+						remote-endpoint = <&gamma0_in>;
+					};
+				};
+			};
 		};
 
 		gamma0: gamma@14011000 {
@@ -1812,6 +1979,25 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_GAMMA0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x1000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					gamma0_in: endpoint {
+						remote-endpoint = <&aal0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					gamma0_out: endpoint {
+						remote-endpoint = <&dither0_in>;
+					};
+				};
+			};
 		};
 
 		dither0: dither@14012000 {
@@ -1821,6 +2007,25 @@
 			power-domains = <&spm MT8183_POWER_DOMAIN_DISP>;
 			clocks = <&mmsys CLK_MM_DISP_DITHER0>;
 			mediatek,gce-client-reg = <&gce SUBSYS_1401XXXX 0x2000 0x1000>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dither0_in: endpoint {
+						remote-endpoint = <&gamma0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					dither0_out: endpoint {
+						remote-endpoint = <&dsi_in>;
+					};
+				};
+			};
 		};
 
 		dsi0: dsi@14014000 {
@@ -1837,8 +2042,21 @@
 			phy-names = "dphy";
 			status = "disabled";
 
-			port {
-				dsi_out: endpoint { };
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dsi_in: endpoint {
+						remote-endpoint = <&dither0_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					dsi_out: endpoint { };
+				};
 			};
 		};
 
@@ -1853,8 +2071,21 @@
 			clock-names = "pixel", "engine", "pll";
 			status = "disabled";
 
-			port {
-				dpi_out: endpoint { };
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					dpi_in: endpoint {
+						remote-endpoint = <&rdma1_out>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					dpi_out: endpoint { };
+				};
 			};
 		};
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi b/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi
index 7c971198fa95..72a2a2bff0a9 100644
--- a/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-krabby.dtsi
@@ -71,14 +71,14 @@
 	i2c-scl-internal-delay-ns = <10000>;
 
 	touchscreen: touchscreen@10 {
-		compatible = "hid-over-i2c";
+		compatible = "elan,ekth6915";
 		reg = <0x10>;
 		interrupts-extended = <&pio 12 IRQ_TYPE_LEVEL_LOW>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&touchscreen_pins>;
-		post-power-on-delay-ms = <10>;
-		hid-descr-addr = <0x0001>;
-		vdd-supply = <&pp3300_s3>;
+		reset-gpios = <&pio 60 GPIO_ACTIVE_LOW>;
+		vcc33-supply = <&pp3300_s3>;
+		no-reset-on-power-off;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts
index 26d3451a5e47..24d9ede63eaa 100644
--- a/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8186-corsola-tentacruel-sku262144.dts
@@ -42,3 +42,7 @@
 		CROS_STD_MAIN_KEYMAP
 	>;
 };
+
+&touchscreen {
+	compatible = "elan,ekth6a12nay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi b/arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi
index c5254ae0bb99..7fedbacdac44 100644
--- a/arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8188-geralt.dtsi
@@ -164,6 +164,12 @@
 		#size-cells = <2>;
 		ranges;
 
+		scp_mem_reserved: memory@50000000 {
+			compatible = "shared-dma-pool";
+			reg = <0 0x50000000 0 0x800000>;
+			no-map;
+		};
+
 		apu_mem: memory@55000000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0x55000000 0 0x1400000>;
@@ -1077,6 +1083,13 @@
 		};
 	};
 
+	scp_pins: scp-pins {
+		pins-scp-vreq {
+			pinmux = <PINMUX_GPIO98__FUNC_O_SCP_VREQ_VAO>;
+			bias-disable;
+		};
+	};
+
 	spi0_pins: spi0-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO69__FUNC_O_SPIM0_CSB>,
@@ -1146,6 +1159,18 @@
 	remote-endpoint = <&dither0_in>;
 };
 
+&scp_cluster {
+	status = "okay";
+};
+
+&scp_c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&scp_pins>;
+	firmware-name = "mediatek/mt8188/scp.img";
+	memory-region = <&scp_mem_reserved>;
+	status = "okay";
+};
+
 &sound {
 	pinctrl-names = "aud_etdm_hp_on", "aud_etdm_hp_off",
 			"aud_etdm_spk_on", "aud_etdm_spk_off",
diff --git a/arch/arm64/boot/dts/mediatek/mt8188.dtsi b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
index 202478407727..90c388f1890f 100644
--- a/arch/arm64/boot/dts/mediatek/mt8188.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8188.dtsi
@@ -2183,7 +2183,7 @@
 		};
 
 		efuse: efuse@11f20000 {
-			compatible = "mediatek,mt8188-efuse", "mediatek,efuse";
+			compatible = "mediatek,mt8188-efuse", "mediatek,mt8186-efuse";
 			reg = <0 0x11f20000 0 0x1000>;
 			#address-cells = <1>;
 			#size-cells = <1>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts
index a82d716f10d4..a50b4e8efaba 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r1.dts
@@ -13,6 +13,7 @@
 &audio_codec {
 	compatible = "realtek,rt5682i";
 	realtek,btndet-delay = <16>;
+	VBAT-supply = <&pp3300_z5>;
 };
 
 &sound {
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
index 2d6522c144b7..a8657c0068d5 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry-tomato-r2.dts
@@ -13,6 +13,7 @@
 &audio_codec {
 	compatible = "realtek,rt5682i";
 	realtek,btndet-delay = <16>;
+	VBAT-supply = <&pp3300_z5>;
 };
 
 &pio_default {
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
index e70599807bb1..b3761b80cac7 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
@@ -534,8 +534,9 @@
 		realtek,jd-src = <1>;
 
 		AVDD-supply = <&mt6359_vio18_ldo_reg>;
+		DBVDD-supply = <&mt6359_vio18_ldo_reg>;
 		MICVDD-supply = <&pp3300_z2>;
-		VBAT-supply = <&pp3300_z5>;
+		LDO1-IN-supply = <&mt6359_vio18_ldo_reg>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/mediatek/mt8195.dtsi b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
index 8877953ce292..ec452d657031 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195.dtsi
@@ -1588,9 +1588,6 @@
 
 			power-domains = <&spm MT8195_POWER_DOMAIN_PCIE_MAC_P0>;
 
-			resets = <&infracfg_ao MT8195_INFRA_RST2_PCIE_P0_SWRST>;
-			reset-names = "mac";
-
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 7>;
 			interrupt-map = <0 0 0 1 &pcie_intc0 0>,
@@ -3039,7 +3036,7 @@
 			#size-cells = <2>;
 		};
 
-		jpgdec-master {
+		jpeg-decoder@1a040000 {
 			compatible = "mediatek,mt8195-jpgdec";
 			power-domains = <&spm MT8195_POWER_DOMAIN_VDEC1>;
 			iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>,
@@ -3050,11 +3047,12 @@
 				 <&iommu_vdo M4U_PORT_L19_JPGDEC_BUFF_OFFSET0>;
 			#address-cells = <2>;
 			#size-cells = <2>;
-			ranges;
+			ranges = <0 0 0 0x1a040000 0 0x20000>,
+				 <1 0 0 0x1b040000 0 0x10000>;
 
-			jpgdec@1a040000 {
+			jpgdec@0,0 {
 				compatible = "mediatek,mt8195-jpgdec-hw";
-				reg = <0 0x1a040000 0 0x10000>;/* JPGDEC_C0 */
+				reg = <0 0 0 0x10000>;/* JPGDEC_C0 */
 				iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>,
 					 <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA0>,
 					 <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA1>,
@@ -3067,9 +3065,9 @@
 				power-domains = <&spm MT8195_POWER_DOMAIN_VDEC0>;
 			};
 
-			jpgdec@1a050000 {
+			jpgdec@0,10000 {
 				compatible = "mediatek,mt8195-jpgdec-hw";
-				reg = <0 0x1a050000 0 0x10000>;/* JPGDEC_C1 */
+				reg = <0 0 0x10000 0x10000>;/* JPGDEC_C1 */
 				iommus = <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA0>,
 					 <&iommu_vdo M4U_PORT_L19_JPGDEC_BSDMA0>,
 					 <&iommu_vdo M4U_PORT_L19_JPGDEC_WDMA1>,
@@ -3082,9 +3080,9 @@
 				power-domains = <&spm MT8195_POWER_DOMAIN_VDEC1>;
 			};
 
-			jpgdec@1b040000 {
+			jpgdec@1,0 {
 				compatible = "mediatek,mt8195-jpgdec-hw";
-				reg = <0 0x1b040000 0 0x10000>;/* JPGDEC_C2 */
+				reg = <1 0 0 0x10000>;/* JPGDEC_C2 */
 				iommus = <&iommu_vpp M4U_PORT_L20_JPGDEC_WDMA0>,
 					 <&iommu_vpp M4U_PORT_L20_JPGDEC_BSDMA0>,
 					 <&iommu_vpp M4U_PORT_L20_JPGDEC_WDMA1>,
@@ -3113,7 +3111,7 @@
 		};
 
 
-		jpgenc-master {
+		jpeg-encoder@1a030000 {
 			compatible = "mediatek,mt8195-jpgenc";
 			power-domains = <&spm MT8195_POWER_DOMAIN_VENC_CORE1>;
 			iommus = <&iommu_vpp M4U_PORT_L20_JPGENC_Y_RDMA>,
@@ -3122,11 +3120,12 @@
 					<&iommu_vpp M4U_PORT_L20_JPGENC_BSDMA>;
 			#address-cells = <2>;
 			#size-cells = <2>;
-			ranges;
+			ranges = <0 0 0 0x1a030000 0 0x10000>,
+				 <1 0 0 0x1b030000 0 0x10000>;
 
-			jpgenc@1a030000 {
+			jpgenc@0,0 {
 				compatible = "mediatek,mt8195-jpgenc-hw";
-				reg = <0 0x1a030000 0 0x10000>;
+				reg = <0 0 0 0x10000>;
 				iommus = <&iommu_vdo M4U_PORT_L19_JPGENC_Y_RDMA>,
 						<&iommu_vdo M4U_PORT_L19_JPGENC_C_RDMA>,
 						<&iommu_vdo M4U_PORT_L19_JPGENC_Q_TABLE>,
@@ -3137,9 +3136,9 @@
 				power-domains = <&spm MT8195_POWER_DOMAIN_VENC>;
 			};
 
-			jpgenc@1b030000 {
+			jpgenc@1,0 {
 				compatible = "mediatek,mt8195-jpgenc-hw";
-				reg = <0 0x1b030000 0 0x10000>;
+				reg = <1 0 0 0x10000>;
 				iommus = <&iommu_vpp M4U_PORT_L20_JPGENC_Y_RDMA>,
 						<&iommu_vpp M4U_PORT_L20_JPGENC_C_RDMA>,
 						<&iommu_vpp M4U_PORT_L20_JPGENC_Q_TABLE>,
diff --git a/arch/arm64/boot/dts/mediatek/mt8395-kontron-3-5-sbc-i1200.dts b/arch/arm64/boot/dts/mediatek/mt8395-kontron-3-5-sbc-i1200.dts
index 4985b65925a9..d16f545cbbb2 100644
--- a/arch/arm64/boot/dts/mediatek/mt8395-kontron-3-5-sbc-i1200.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8395-kontron-3-5-sbc-i1200.dts
@@ -352,7 +352,7 @@
 			LDO_VIN2-supply = <&vsys>;
 			LDO_VIN3-supply = <&vsys>;
 
-			mt6360_buck1: BUCK1 {
+			mt6360_buck1: buck1 {
 				regulator-name = "emi_vdd2";
 				regulator-min-microvolt = <600000>;
 				regulator-max-microvolt = <1800000>;
@@ -362,7 +362,7 @@
 				regulator-always-on;
 			};
 
-			mt6360_buck2: BUCK2 {
+			mt6360_buck2: buck2 {
 				regulator-name = "emi_vddq";
 				regulator-min-microvolt = <300000>;
 				regulator-max-microvolt = <1300000>;
@@ -372,7 +372,7 @@
 				regulator-always-on;
 			};
 
-			mt6360_ldo1: LDO1 {
+			mt6360_ldo1: ldo1 {
 				regulator-name = "mt6360_ldo1"; /* Test point */
 				regulator-min-microvolt = <1200000>;
 				regulator-max-microvolt = <3600000>;
@@ -380,7 +380,7 @@
 							   MT6360_OPMODE_LP>;
 			};
 
-			mt6360_ldo2: LDO2 {
+			mt6360_ldo2: ldo2 {
 				regulator-name = "panel1_p1v8";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
@@ -388,7 +388,7 @@
 							   MT6360_OPMODE_LP>;
 			};
 
-			mt6360_ldo3: LDO3 {
+			mt6360_ldo3: ldo3 {
 				regulator-name = "vmc_pmu";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
@@ -396,7 +396,7 @@
 							   MT6360_OPMODE_LP>;
 			};
 
-			mt6360_ldo5: LDO5 {
+			mt6360_ldo5: ldo5 {
 				regulator-name = "vmch_pmu";
 				regulator-min-microvolt = <3300000>;
 				regulator-max-microvolt = <3300000>;
@@ -404,7 +404,7 @@
 							   MT6360_OPMODE_LP>;
 			};
 
-			mt6360_ldo6: LDO6 {
+			mt6360_ldo6: ldo6 {
 				regulator-name = "mt6360_ldo6"; /* Test point */
 				regulator-min-microvolt = <500000>;
 				regulator-max-microvolt = <2100000>;
@@ -412,7 +412,7 @@
 							   MT6360_OPMODE_LP>;
 			};
 
-			mt6360_ldo7: LDO7 {
+			mt6360_ldo7: ldo7 {
 				regulator-name = "emi_vmddr_en";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <1800000>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
index 329c60cc6a6b..d32f973f5e05 100644
--- a/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8395-radxa-nio-12l.dts
@@ -8,6 +8,7 @@
 #include "mt8195.dtsi"
 #include "mt6359.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/mt8195-pinfunc.h>
 #include <dt-bindings/regulator/mediatek,mt6360-regulator.h>
@@ -60,6 +61,18 @@
 		status = "disabled";
 	};
 
+	keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		button-volume-up {
+			wakeup-source;
+			debounce-interval = <100>;
+			gpios = <&pio 106 GPIO_ACTIVE_LOW>;
+			label = "volume_up";
+			linux,code = <KEY_VOLUMEUP>;
+		};
+	};
+
 	wifi_vreg: regulator-wifi-3v3-en {
 		compatible = "regulator-fixed";
 		regulator-name = "wifi_3v3_en";
@@ -626,6 +639,14 @@
 		};
 	};
 
+	gpio_key_pins: gpio-keys-pins {
+		pins {
+			pinmux = <PINMUX_GPIO106__FUNC_GPIO106>;
+			bias-pull-up;
+			input-enable;
+		};
+	};
+
 	i2c2_pins: i2c2-pins {
 		pins-bus {
 			pinmux = <PINMUX_GPIO12__FUNC_SDA2>,
@@ -880,6 +901,21 @@
 
 &pmic {
 	interrupts-extended = <&pio 222 IRQ_TYPE_LEVEL_HIGH>;
+
+	mt6359keys: keys {
+		compatible = "mediatek,mt6359-keys";
+		mediatek,long-press-mode = <1>;
+		power-off-time-sec = <0>;
+
+		power-key {
+			linux,keycodes = <KEY_POWER>;
+			wakeup-source;
+		};
+
+		home {
+			linux,keycodes = <KEY_HOME>;
+		};
+	};
 };
 
 &scp {
@@ -990,6 +1026,16 @@
 	status = "okay";
 };
 
+&ufshci {
+	vcc-supply = <&mt6359_vemc_1_ldo_reg>;
+	vccq2-supply = <&mt6359_vufs_ldo_reg>;
+	status = "okay";
+};
+
+&ufsphy {
+	status = "okay";
+};
+
 &ssusb0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb3_port0_pins>;
diff --git a/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts b/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts
index cce642c53812..3d3db33a64dc 100644
--- a/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts
+++ b/arch/arm64/boot/dts/mediatek/mt8516-pumpkin.dts
@@ -11,7 +11,7 @@
 
 / {
 	model = "Pumpkin MT8516";
-	compatible = "mediatek,mt8516";
+	compatible = "mediatek,mt8516-pumpkin", "mediatek,mt8516";
 
 	memory@40000000 {
 		device_type = "memory";
diff --git a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
index a356db5fcc5f..805fb82138a8 100644
--- a/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
+++ b/arch/arm64/boot/dts/mediatek/pumpkin-common.dtsi
@@ -198,8 +198,8 @@
 };
 
 &pio {
-	gpio_keys_default: gpiodefault {
-		pins_cmd_dat {
+	gpio_keys_default: gpio-keys-pins {
+		pins-cmd-dat {
 			pinmux = <MT8516_PIN_42_KPCOL0__FUNC_GPIO42>,
 				 <MT8516_PIN_43_KPCOL1__FUNC_GPIO43>;
 			bias-pull-up;
@@ -207,7 +207,7 @@
 		};
 	};
 
-	i2c0_pins_a: i2c0 {
+	i2c0_pins_a: i2c0-pins {
 		pins1 {
 			pinmux = <MT8516_PIN_58_SDA0__FUNC_SDA0_0>,
 				 <MT8516_PIN_59_SCL0__FUNC_SCL0_0>;
@@ -215,7 +215,7 @@
 		};
 	};
 
-	i2c2_pins_a: i2c2 {
+	i2c2_pins_a: i2c2-pins {
 		pins1 {
 			pinmux = <MT8516_PIN_60_SDA2__FUNC_SDA2_0>,
 				 <MT8516_PIN_61_SCL2__FUNC_SCL2_0>;
@@ -223,21 +223,21 @@
 		};
 	};
 
-	tca6416_pins: pinmux_tca6416_pins {
-		gpio_mux_rst_n_pin {
+	tca6416_pins: tca6416-pins {
+		pins-mux-rstn {
 			pinmux = <MT8516_PIN_65_UTXD1__FUNC_GPIO65>;
 			output-high;
 		};
 
-		gpio_mux_int_n_pin {
+		pins-mux-intn {
 			pinmux = <MT8516_PIN_64_URXD1__FUNC_GPIO64>;
 			input-enable;
 			bias-pull-up;
 		};
 	};
 
-	ethernet_pins_default: ethernet {
-		pins_ethernet {
+	ethernet_pins_default: ethernet-pins {
+		pins-eth {
 			pinmux = <MT8516_PIN_0_EINT0__FUNC_EXT_TXD0>,
 				 <MT8516_PIN_1_EINT1__FUNC_EXT_TXD1>,
 				 <MT8516_PIN_5_EINT5__FUNC_EXT_RXER>,
diff --git a/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi b/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi
index acd3137d2464..24133528b8e9 100644
--- a/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi
+++ b/arch/arm64/boot/dts/nuvoton/nuvoton-common-npcm8xx.dtsi
@@ -42,17 +42,13 @@
 		interrupt-parent = <&gic>;
 		ranges;
 
-		rstc: reset-controller@f0801000 {
+		clk: rstc: reset-controller@f0801000 {
 			compatible = "nuvoton,npcm845-reset";
-			reg = <0x0 0xf0801000 0x0 0x78>;
-			#reset-cells = <2>;
+			reg = <0x0 0xf0801000 0x0 0xC4>;
 			nuvoton,sysgcr = <&gcr>;
-		};
-
-		clk: clock-controller@f0801000 {
-			compatible = "nuvoton,npcm845-clk";
+			#reset-cells = <2>;
+			clocks = <&refclk>;
 			#clock-cells = <1>;
-			reg = <0x0 0xf0801000 0x0 0x1000>;
 		};
 
 		apb {
@@ -76,7 +72,7 @@
 				compatible = "nuvoton,npcm845-timer";
 				interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x8000 0x1C>;
-				clocks = <&clk NPCM8XX_CLK_REFCLK>;
+				clocks = <&refclk>;
 				clock-names = "refclk";
 			};
 
@@ -148,7 +144,7 @@
 				interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x801c 0x4>;
 				status = "disabled";
-				clocks = <&clk NPCM8XX_CLK_REFCLK>;
+				clocks = <&refclk>;
 				syscon = <&gcr>;
 			};
 
@@ -157,7 +153,7 @@
 				interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0x901c 0x4>;
 				status = "disabled";
-				clocks = <&clk NPCM8XX_CLK_REFCLK>;
+				clocks = <&refclk>;
 				syscon = <&gcr>;
 			};
 
@@ -166,7 +162,7 @@
 				interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
 				reg = <0xa01c 0x4>;
 				status = "disabled";
-				clocks = <&clk NPCM8XX_CLK_REFCLK>;
+				clocks = <&refclk>;
 				syscon = <&gcr>;
 			};
 		};
@@ -235,5 +231,654 @@
 			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
 			gpio-ranges = <&pinctrl 0 224 32>;
 		};
+
+		iox1_pins: iox1-mux {
+			groups = "iox1";
+			function = "iox1";
+		};
+		iox2_pins: iox2-mux {
+			groups = "iox2";
+			function = "iox2";
+		};
+		smb1d_pins: smb1d-mux {
+			groups = "smb1d";
+			function = "smb1d";
+		};
+		smb2d_pins: smb2d-mux {
+			groups = "smb2d";
+			function = "smb2d";
+		};
+		lkgpo1_pins: lkgpo1-mux {
+			groups = "lkgpo1";
+			function = "lkgpo1";
+		};
+		lkgpo2_pins: lkgpo2-mux {
+			groups = "lkgpo2";
+			function = "lkgpo2";
+		};
+		ioxh_pins: ioxh-mux {
+			groups = "ioxh";
+			function = "ioxh";
+		};
+		gspi_pins: gspi-mux {
+			groups = "gspi";
+			function = "gspi";
+		};
+		smb5b_pins: smb5b-mux {
+			groups = "smb5b";
+			function = "smb5b";
+		};
+		smb5c_pins: smb5c-mux {
+			groups = "smb5c";
+			function = "smb5c";
+		};
+		lkgpo0_pins: lkgpo0-mux {
+			groups = "lkgpo0";
+			function = "lkgpo0";
+		};
+		pspi_pins: pspi-mux {
+			groups = "pspi";
+			function = "pspi";
+		};
+		jm1_pins: jm1-mux {
+			groups = "jm1";
+			function = "jm1";
+		};
+		jm2_pins: jm2-mux {
+			groups = "jm2";
+			function = "jm2";
+		};
+		smb4b_pins: smb4b-mux {
+			groups = "smb4b";
+			function = "smb4b";
+		};
+		smb4c_pins: smb4c-mux {
+			groups = "smb4c";
+			function = "smb4c";
+		};
+		smb15_pins: smb15-mux {
+			groups = "smb15";
+			function = "smb15";
+		};
+		smb16_pins: smb16-mux {
+			groups = "smb16";
+			function = "smb16";
+		};
+		smb17_pins: smb17-mux {
+			groups = "smb17";
+			function = "smb17";
+		};
+		smb18_pins: smb18-mux {
+			groups = "smb18";
+			function = "smb18";
+		};
+		smb19_pins: smb19-mux {
+			groups = "smb19";
+			function = "smb19";
+		};
+		smb20_pins: smb20-mux {
+			groups = "smb20";
+			function = "smb20";
+		};
+		smb21_pins: smb21-mux {
+			groups = "smb21";
+			function = "smb21";
+		};
+		smb22_pins: smb22-mux {
+			groups = "smb22";
+			function = "smb22";
+		};
+		smb23_pins: smb23-mux {
+			groups = "smb23";
+			function = "smb23";
+		};
+		smb23b_pins: smb23b-mux {
+			groups = "smb23b";
+			function = "smb23b";
+		};
+		smb4d_pins: smb4d-mux {
+			groups = "smb4d";
+			function = "smb4d";
+		};
+		smb14_pins: smb14-mux {
+			groups = "smb14";
+			function = "smb14";
+		};
+		smb5_pins: smb5-mux {
+			groups = "smb5";
+			function = "smb5";
+		};
+		smb4_pins: smb4-mux {
+			groups = "smb4";
+			function = "smb4";
+		};
+		smb3_pins: smb3-mux {
+			groups = "smb3";
+			function = "smb3";
+		};
+		spi0cs1_pins: spi0cs1-mux {
+			groups = "spi0cs1";
+			function = "spi0cs1";
+		};
+		spi1cs0_pins: spi1cs0-mux {
+			groups = "spi1cs0";
+			function = "spi1cs0";
+		};
+		spi1cs1_pins: spi1cs1-mux {
+			groups = "spi1cs1";
+			function = "spi1cs1";
+		};
+		spi1cs2_pins: spi1cs2-mux {
+			groups = "spi1cs2";
+			function = "spi1cs2";
+		};
+		spi1cs3_pins: spi1cs3-mux {
+			groups = "spi1cs3";
+			function = "spi1cs3";
+		};
+		smb3c_pins: smb3c-mux {
+			groups = "smb3c";
+			function = "smb3c";
+		};
+		smb3b_pins: smb3b-mux {
+			groups = "smb3b";
+			function = "smb3b";
+		};
+		bmcuart0a_pins: bmcuart0a-mux {
+			groups = "bmcuart0a";
+			function = "bmcuart0a";
+		};
+		uart1_pins: uart1-mux {
+			groups = "uart1";
+			function = "uart1";
+		};
+		jtag2_pins: jtag2-mux {
+			groups = "jtag2";
+			function = "jtag2";
+		};
+		bmcuart1_pins: bmcuart1-mux {
+			groups = "bmcuart1";
+			function = "bmcuart1";
+		};
+		uart2_pins: uart2-mux {
+			groups = "uart2";
+			function = "uart2";
+		};
+		bmcuart0b_pins: bmcuart0b-mux {
+			groups = "bmcuart0b";
+			function = "bmcuart0b";
+		};
+		r1err_pins: r1err-mux {
+			groups = "r1err";
+			function = "r1err";
+		};
+		r1md_pins: r1md-mux {
+			groups = "r1md";
+			function = "r1md";
+		};
+		r1oen_pins: r1oen-mux {
+			groups = "r1oen";
+			function = "r1oen";
+		};
+		r2oen_pins: r2oen-mux {
+			groups = "r2oen";
+			function = "r2oen";
+		};
+		rmii3_pins: rmii3-mux {
+			groups = "rmii3";
+			function = "rmii3";
+		};
+		r3oen_pins: r3oen-mux {
+			groups = "r3oen";
+			function = "r3oen";
+		};
+		smb3d_pins: smb3d-mux {
+			groups = "smb3d";
+			function = "smb3d";
+		};
+		fanin0_pins: fanin0-mux {
+			groups = "fanin0";
+			function = "fanin0";
+		};
+		fanin1_pins: fanin1-mux {
+			groups = "fanin1";
+			function = "fanin1";
+		};
+		fanin2_pins: fanin2-mux {
+			groups = "fanin2";
+			function = "fanin2";
+		};
+		fanin3_pins: fanin3-mux {
+			groups = "fanin3";
+			function = "fanin3";
+		};
+		fanin4_pins: fanin4-mux {
+			groups = "fanin4";
+			function = "fanin4";
+		};
+		fanin5_pins: fanin5-mux {
+			groups = "fanin5";
+			function = "fanin5";
+		};
+		fanin6_pins: fanin6-mux {
+			groups = "fanin6";
+			function = "fanin6";
+		};
+		fanin7_pins: fanin7-mux {
+			groups = "fanin7";
+			function = "fanin7";
+		};
+		fanin8_pins: fanin8-mux {
+			groups = "fanin8";
+			function = "fanin8";
+		};
+		fanin9_pins: fanin9-mux {
+			groups = "fanin9";
+			function = "fanin9";
+		};
+		fanin10_pins: fanin10-mux {
+			groups = "fanin10";
+			function = "fanin10";
+		};
+		fanin11_pins: fanin11-mux {
+			groups = "fanin11";
+			function = "fanin11";
+		};
+		fanin12_pins: fanin12-mux {
+			groups = "fanin12";
+			function = "fanin12";
+		};
+		fanin13_pins: fanin13-mux {
+			groups = "fanin13";
+			function = "fanin13";
+		};
+		fanin14_pins: fanin14-mux {
+			groups = "fanin14";
+			function = "fanin14";
+		};
+		fanin15_pins: fanin15-mux {
+			groups = "fanin15";
+			function = "fanin15";
+		};
+		pwm0_pins: pwm0-mux {
+			groups = "pwm0";
+			function = "pwm0";
+		};
+		pwm1_pins: pwm1-mux {
+			groups = "pwm1";
+			function = "pwm1";
+		};
+		pwm2_pins: pwm2-mux {
+			groups = "pwm2";
+			function = "pwm2";
+		};
+		pwm3_pins: pwm3-mux {
+			groups = "pwm3";
+			function = "pwm3";
+		};
+		r2_pins: r2-mux {
+			groups = "r2";
+			function = "r2";
+		};
+		r2err_pins: r2err-mux {
+			groups = "r2err";
+			function = "r2err";
+		};
+		r2md_pins: r2md-mux {
+			groups = "r2md";
+			function = "r2md";
+		};
+		r3rxer_pins: r3rxer-mux {
+			groups = "r3rxer";
+			function = "r3rxer";
+		};
+		ga20kbc_pins: ga20kbc-mux {
+			groups = "ga20kbc";
+			function = "ga20kbc";
+		};
+		smb5d_pins: smb5d-mux {
+			groups = "smb5d";
+			function = "smb5d";
+		};
+		lpc_pins: lpc-mux {
+			groups = "lpc";
+			function = "lpc";
+		};
+		espi_pins: espi-mux {
+			groups = "espi";
+			function = "espi";
+		};
+		sg1mdio_pins: sg1mdio-mux {
+			groups = "sg1mdio";
+			function = "sg1mdio";
+		};
+		rg2_pins: rg2-mux {
+			groups = "rg2";
+			function = "rg2";
+		};
+		ddr_pins: ddr-mux {
+			groups = "ddr";
+			function = "ddr";
+		};
+		i3c0_pins: i3c0-mux {
+			groups = "i3c0";
+			function = "i3c0";
+		};
+		i3c1_pins: i3c1-mux {
+			groups = "i3c1";
+			function = "i3c1";
+		};
+		i3c2_pins: i3c2-mux {
+			groups = "i3c2";
+			function = "i3c2";
+		};
+		i3c3_pins: i3c3-mux {
+			groups = "i3c3";
+			function = "i3c3";
+		};
+		i3c4_pins: i3c4-mux {
+			groups = "i3c4";
+			function = "i3c4";
+		};
+		i3c5_pins: i3c5-mux {
+			groups = "i3c5";
+			function = "i3c5";
+		};
+		smb0_pins: smb0-mux {
+			groups = "smb0";
+			function = "smb0";
+		};
+		smb1_pins: smb1-mux {
+			groups = "smb1";
+			function = "smb1";
+		};
+		smb2_pins: smb2-mux {
+			groups = "smb2";
+			function = "smb2";
+		};
+		smb2c_pins: smb2c-mux {
+			groups = "smb2c";
+			function = "smb2c";
+		};
+		smb2b_pins: smb2b-mux {
+			groups = "smb2b";
+			function = "smb2b";
+		};
+		smb1c_pins: smb1c-mux {
+			groups = "smb1c";
+			function = "smb1c";
+		};
+		smb1b_pins: smb1b-mux {
+			groups = "smb1b";
+			function = "smb1b";
+		};
+		smb8_pins: smb8-mux {
+			groups = "smb8";
+			function = "smb8";
+		};
+		smb9_pins: smb9-mux {
+			groups = "smb9";
+			function = "smb9";
+		};
+		smb10_pins: smb10-mux {
+			groups = "smb10";
+			function = "smb10";
+		};
+		smb11_pins: smb11-mux {
+			groups = "smb11";
+			function = "smb11";
+		};
+		sd1_pins: sd1-mux {
+			groups = "sd1";
+			function = "sd1";
+		};
+		sd1pwr_pins: sd1pwr-mux {
+			groups = "sd1pwr";
+			function = "sd1pwr";
+		};
+		pwm4_pins: pwm4-mux {
+			groups = "pwm4";
+			function = "pwm4";
+		};
+		pwm5_pins: pwm5-mux {
+			groups = "pwm5";
+			function = "pwm5";
+		};
+		pwm6_pins: pwm6-mux {
+			groups = "pwm6";
+			function = "pwm6";
+		};
+		pwm7_pins: pwm7-mux {
+			groups = "pwm7";
+			function = "pwm7";
+		};
+		pwm8_pins: pwm8-mux {
+			groups = "pwm8";
+			function = "pwm8";
+		};
+		pwm9_pins: pwm9-mux {
+			groups = "pwm9";
+			function = "pwm9";
+		};
+		pwm10_pins: pwm10-mux {
+			groups = "pwm10";
+			function = "pwm10";
+		};
+		pwm11_pins: pwm11-mux {
+			groups = "pwm11";
+			function = "pwm11";
+		};
+		mmc8_pins: mmc8-mux {
+			groups = "mmc8";
+			function = "mmc8";
+		};
+		mmc_pins: mmc-mux {
+			groups = "mmc";
+			function = "mmc";
+		};
+		mmcwp_pins: mmcwp-mux {
+			groups = "mmcwp";
+			function = "mmcwp";
+		};
+		mmccd_pins: mmccd-mux {
+			groups = "mmccd";
+			function = "mmccd";
+		};
+		mmcrst_pins: mmcrst-mux {
+			groups = "mmcrst";
+			function = "mmcrst";
+		};
+		clkout_pins: clkout-mux {
+			groups = "clkout";
+			function = "clkout";
+		};
+		serirq_pins: serirq-mux {
+			groups = "serirq";
+			function = "serirq";
+		};
+		scipme_pins: scipme-mux {
+			groups = "scipme";
+			function = "scipme";
+		};
+		smb6_pins: smb6-mux {
+			groups = "smb6";
+			function = "smb6";
+		};
+		smb6b_pins: smb6b-mux {
+			groups = "smb6b";
+			function = "smb6b";
+		};
+		smb6c_pins: smb6c-mux {
+			groups = "smb6c";
+			function = "smb6c";
+		};
+		smb6d_pins: smb6d-mux {
+			groups = "smb6d";
+			function = "smb6d";
+		};
+		smb7_pins: smb7-mux {
+			groups = "smb7";
+			function = "smb7";
+		};
+		smb7b_pins: smb7b-mux {
+			groups = "smb7b";
+			function = "smb7b";
+		};
+		smb7c_pins: smb7c-mux {
+			groups = "smb7c";
+			function = "smb7c";
+		};
+		smb7d_pins: smb7d-mux {
+			groups = "smb7d";
+			function = "smb7d";
+		};
+		spi1_pins: spi1-mux {
+			groups = "spi1";
+			function = "spi1";
+		};
+		faninx_pins: faninx-mux {
+			groups = "faninx";
+			function = "faninx";
+		};
+		r1_pins: r1-mux {
+			groups = "r1";
+			function = "r1";
+		};
+		spi3_pins: spi3-mux {
+			groups = "spi3";
+			function = "spi3";
+		};
+		spi3cs1_pins: spi3cs1-mux {
+			groups = "spi3cs1";
+			function = "spi3cs1";
+		};
+		spi3quad_pins: spi3quad-mux {
+			groups = "spi3quad";
+			function = "spi3quad";
+		};
+		spi3cs2_pins: spi3cs2-mux {
+			groups = "spi3cs2";
+			function = "spi3cs2";
+		};
+		spi3cs3_pins: spi3cs3-mux {
+			groups = "spi3cs3";
+			function = "spi3cs3";
+		};
+		nprd_smi_pins: nprd-smi-mux {
+			groups = "nprd_smi";
+			function = "nprd_smi";
+		};
+		smi_pins: smi-mux {
+			groups = "smi";
+			function = "smi";
+		};
+		smb0b_pins: smb0b-mux {
+			groups = "smb0b";
+			function = "smb0b";
+		};
+		smb0c_pins: smb0c-mux {
+			groups = "smb0c";
+			function = "smb0c";
+		};
+		smb0den_pins: smb0den-mux {
+			groups = "smb0den";
+			function = "smb0den";
+		};
+		smb0d_pins: smb0d-mux {
+			groups = "smb0d";
+			function = "smb0d";
+		};
+		ddc_pins: ddc-mux {
+			groups = "ddc";
+			function = "ddc";
+		};
+		rg2mdio_pins: rg2mdio-mux {
+			groups = "rg2mdio";
+			function = "rg2mdio";
+		};
+		wdog1_pins: wdog1-mux {
+			groups = "wdog1";
+			function = "wdog1";
+		};
+		wdog2_pins: wdog2-mux {
+			groups = "wdog2";
+			function = "wdog2";
+		};
+		smb12_pins: smb12-mux {
+			groups = "smb12";
+			function = "smb12";
+		};
+		smb13_pins: smb13-mux {
+			groups = "smb13";
+			function = "smb13";
+		};
+		spix_pins: spix-mux {
+			groups = "spix";
+			function = "spix";
+		};
+		spixcs1_pins: spixcs1-mux {
+			groups = "spixcs1";
+			function = "spixcs1";
+		};
+		clkreq_pins: clkreq-mux {
+			groups = "clkreq";
+			function = "clkreq";
+		};
+		hgpio0_pins: hgpio0-mux {
+			groups = "hgpio0";
+			function = "hgpio0";
+		};
+		hgpio1_pins: hgpio1-mux {
+			groups = "hgpio1";
+			function = "hgpio1";
+		};
+		hgpio2_pins: hgpio2-mux {
+			groups = "hgpio2";
+			function = "hgpio2";
+		};
+		hgpio3_pins: hgpio3-mux {
+			groups = "hgpio3";
+			function = "hgpio3";
+		};
+		hgpio4_pins: hgpio4-mux {
+			groups = "hgpio4";
+			function = "hgpio4";
+		};
+		hgpio5_pins: hgpio5-mux {
+			groups = "hgpio5";
+			function = "hgpio5";
+		};
+		hgpio6_pins: hgpio6-mux {
+			groups = "hgpio6";
+			function = "hgpio6";
+		};
+		hgpio7_pins: hgpio7-mux {
+			groups = "hgpio7";
+			function = "hgpio7";
+		};
+		bu4_pins: bu4-mux {
+			groups = "bu4";
+			function = "bu4";
+		};
+		bu4b_pins: bu4b-mux {
+			groups = "bu4b";
+			function = "bu4b";
+		};
+		bu5_pins: bu5-mux {
+			groups = "bu5";
+			function = "bu5";
+		};
+		bu5b_pins: bu5b-mux {
+			groups = "bu5b";
+			function = "bu5b";
+		};
+		bu6_pins: bu6-mux {
+			groups = "bu6";
+			function = "bu6";
+		};
+		gpo187_pins: gpo187-mux {
+			groups = "gpo187";
+			function = "gpo187";
+		};
 	};
 };
diff --git a/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts b/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts
index eeceb5b292a8..2638ee1c3846 100644
--- a/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts
+++ b/arch/arm64/boot/dts/nuvoton/nuvoton-npcm845-evb.dts
@@ -19,6 +19,12 @@
 	memory@0 {
 		reg = <0x0 0x0 0x0 0x40000000>;
 	};
+
+	refclk: refclk-25mhz {
+		compatible = "fixed-clock";
+		clock-frequency = <25000000>;
+		#clock-cells = <0>;
+	};
 };
 
 &serial0 {
diff --git a/arch/arm64/boot/dts/nvidia/tegra264.dtsi b/arch/arm64/boot/dts/nvidia/tegra264.dtsi
index e02659efa233..872a69553e3c 100644
--- a/arch/arm64/boot/dts/nvidia/tegra264.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra264.dtsi
@@ -148,6 +148,36 @@
 			status = "disabled";
 		};
 
+		i2c2: i2c@c600000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x0 0x0c600000 0x0 0x10000>;
+			interrupts = <GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_AON_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLAON>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_AON_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLAON>;
+			resets = <&bpmp TEGRA264_RESET_I2C2>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c3: i2c@c610000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x0 0x0c610000 0x0 0x10000>;
+			interrupts = <GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_AON_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLAON>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_AON_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLAON>;
+			resets = <&bpmp TEGRA264_RESET_I2C3>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
 		pmc: pmc@c800000 {
 			compatible = "nvidia,tegra264-pmc";
 			reg = <0x0 0x0c800000 0x0 0x100000>,
@@ -272,6 +302,201 @@
 			dma-coherent;
 		};
 
+		i2c14: i2c@c410000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x00 0x0c410000 0x0 0x10000>;
+			interrupts = <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA264_RESET_I2C14>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c15: i2c@c420000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x00 0x0c420000 0x0 0x10000>;
+			interrupts = <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA264_RESET_I2C15>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c16: i2c@c430000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x00 0x0c430000 0x0 0x10000>;
+			interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA264_RESET_I2C16>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c0: i2c@c630000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x00 0x0c630000 0x0 0x10000>;
+			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA264_RESET_I2C0>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c1: i2c@c640000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x00 0x0c640000 0x0 0x10000>;
+			interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA264_RESET_I2C1>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c4: i2c@c650000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x00 0x0c650000 0x0 0x10000>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA264_RESET_I2C4>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c6: i2c@c670000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x00 0x0c670000 0x0 0x10000>;
+			interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA264_RESET_I2C6>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c7: i2c@c680000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x00 0x0c680000 0x0 0x10000>;
+			interrupts = <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA264_RESET_I2C7>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c8: i2c@c690000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x00 0x0c690000 0x0 0x10000>;
+			interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA264_RESET_I2C8>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c9: i2c@c6a0000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x00 0x0c6a0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA264_RESET_I2C9>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c10: i2c@c6b0000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x00 0x0c6b0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA264_RESET_I2C10>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c11: i2c@c6c0000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x00 0x0c6c0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA264_RESET_I2C11>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
+		i2c12: i2c@c6d0000 {
+			compatible = "nvidia,tegra264-i2c";
+			reg = <0x00 0x0c6d0000 0x0 0x10000>;
+			interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+			clock-frequency = <400000>;
+			clocks = <&bpmp TEGRA264_CLK_TOP_I2C>,
+				 <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			clock-names = "div-clk", "parent";
+			assigned-clocks = <&bpmp TEGRA264_CLK_TOP_I2C>;
+			assigned-clock-parents = <&bpmp TEGRA264_CLK_PLLP_OUT0>;
+			resets = <&bpmp TEGRA264_RESET_I2C12>;
+			reset-names = "i2c";
+			status = "disabled";
+		};
+
 		gic: interrupt-controller@46000000 {
 			compatible = "arm,gic-v3";
 			reg = <0x00 0x46000000 0x0 0x010000>, /* GICD */
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 4bfa926b6a08..296688f7cb26 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -13,6 +13,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= apq8039-t2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8094-sony-xperia-kitakami-karin_windy.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-db820c.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-ifc6640.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= hamoa-iot-evk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq5018-rdp432-c2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq5018-tplink-archer-ax55-v1.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq5332-rdp441.dtb
@@ -29,6 +30,12 @@ dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-rdp433.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-rdp449.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-rdp453.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= ipq9574-rdp454.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= lemans-evk.dtb
+
+lemans-evk-camera-csi1-imx577-dtbs	:= lemans-evk.dtb lemans-evk-camera-csi1-imx577.dtbo
+
+dtb-$(CONFIG_ARCH_QCOM)	+= lemans-evk-camera-csi1-imx577.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= monaco-evk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8216-samsung-fortuna3g.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-acer-a1-724.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8916-alcatel-idol347.dtb
@@ -71,6 +78,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-samsung-a7.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-sony-xperia-kanuti-tulip.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-wingtech-wt82918.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8939-wingtech-wt82918hd.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-flipkart-rimob.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-motorola-potter.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-xiaomi-daisy.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8953-xiaomi-mido.dtb
@@ -113,6 +121,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-sony-xperia-yoshino-poplar.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= msm8998-xiaomi-sagit.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcm6490-fairphone-fp5.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcm6490-idp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= qcm6490-particle-tachyon.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcm6490-shift-otter.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-1000.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= qcs404-evb-4000.dtb
@@ -231,9 +240,6 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sdm632-motorola-ocean.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm636-sony-xperia-ganges-mermaid.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm660-xiaomi-lavender.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm670-google-sargo.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r1.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r2.dtb
-dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-cheza-r3.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sdm845-db845c.dtb
 
 sdm845-db845c-navigation-mezzanine-dtbs	:= sdm845-db845c.dtb sdm845-db845c-navigation-mezzanine.dtbo
@@ -275,6 +281,8 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-sony-xperia-kumano-bahamut.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8150-sony-xperia-kumano-griffin.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-hdk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-mtp.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-samsung-r8q.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-samsung-x1q.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-sony-xperia-edo-pdx203.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-sony-xperia-edo-pdx206.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8250-xiaomi-elish-boe.dtb
@@ -287,6 +295,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-sony-xperia-sagami-pdx214.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8350-sony-xperia-sagami-pdx215.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-hdk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-qrd.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-samsung-r0q.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-sony-xperia-nagara-pdx223.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8450-sony-xperia-nagara-pdx224.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm8550-hdk.dtb
@@ -315,6 +324,10 @@ x1e80100-asus-zenbook-a14-el2-dtbs	:= x1e80100-asus-zenbook-a14.dtb x1-el2.dtbo
 dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-asus-zenbook-a14.dtb x1e80100-asus-zenbook-a14-el2.dtb
 x1e80100-crd-el2-dtbs	:= x1e80100-crd.dtb x1-el2.dtbo
 dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-crd.dtb x1e80100-crd-el2.dtb
+x1e80100-dell-inspiron-14-plus-7441-el2-dtbs	:= x1e80100-dell-inspiron-14-plus-7441.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-dell-inspiron-14-plus-7441.dtb x1e80100-dell-inspiron-14-plus-7441-el2.dtb
+x1e80100-dell-latitude-7455-el2-dtbs	:= x1e80100-dell-latitude-7455.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-dell-latitude-7455.dtb x1e80100-dell-latitude-7455-el2.dtb
 x1e80100-dell-xps13-9345-el2-dtbs	:= x1e80100-dell-xps13-9345.dtb x1-el2.dtbo
 dtb-$(CONFIG_ARCH_QCOM)	+= x1e80100-dell-xps13-9345.dtb x1e80100-dell-xps13-9345-el2.dtb
 x1e80100-hp-elitebook-ultra-g1q-el2-dtbs := x1e80100-hp-elitebook-ultra-g1q.dtb x1-el2.dtbo
@@ -333,3 +346,7 @@ x1p42100-asus-zenbook-a14-el2-dtbs	:= x1p42100-asus-zenbook-a14.dtb x1-el2.dtbo
 dtb-$(CONFIG_ARCH_QCOM)	+= x1p42100-asus-zenbook-a14.dtb x1p42100-asus-zenbook-a14-el2.dtb
 x1p42100-crd-el2-dtbs	:= x1p42100-crd.dtb x1-el2.dtbo
 dtb-$(CONFIG_ARCH_QCOM)	+= x1p42100-crd.dtb x1p42100-crd-el2.dtb
+x1p42100-hp-omnibook-x14-el2-dtbs := x1p42100-hp-omnibook-x14.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1p42100-hp-omnibook-x14.dtb x1p42100-hp-omnibook-x14-el2.dtb
+x1p42100-lenovo-thinkbook-16-el2-dtbs	:= x1p42100-lenovo-thinkbook-16.dtb x1-el2.dtbo
+dtb-$(CONFIG_ARCH_QCOM)	+= x1p42100-lenovo-thinkbook-16.dtb x1p42100-lenovo-thinkbook-16-el2.dtb
diff --git a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
index b0c594c5f236..ba6ccf0db16a 100644
--- a/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
+++ b/arch/arm64/boot/dts/qcom/apq8016-sbc.dts
@@ -157,8 +157,6 @@
 	status = "okay";
 
 	adv_bridge: bridge@39 {
-		status = "okay";
-
 		compatible = "adi,adv7533";
 		reg = <0x39>;
 
@@ -181,7 +179,7 @@
 		pinctrl-names = "default","sleep";
 		pinctrl-0 = <&adv7533_int_active &adv7533_switch_active>;
 		pinctrl-1 = <&adv7533_int_suspend &adv7533_switch_suspend>;
-		#sound-dai-cells = <1>;
+		#sound-dai-cells = <0>;
 
 		ports {
 			#address-cells = <1>;
@@ -346,7 +344,7 @@
 			sound-dai = <&lpass MI2S_QUATERNARY>;
 		};
 		codec {
-			sound-dai = <&adv_bridge 0>;
+			sound-dai = <&adv_bridge>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
new file mode 100644
index 000000000000..df8d6e5c1f45
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/hamoa-iot-evk.dts
@@ -0,0 +1,1222 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+/dts-v1/;
+
+#include "hamoa-iot-som.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. Hamoa IoT EVK";
+	compatible = "qcom,hamoa-iot-evk", "qcom,hamoa-iot-som", "qcom,x1e80100";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart21;
+		serial1 = &uart14;
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9385-codec";
+
+		pinctrl-0 = <&wcd_default>;
+		pinctrl-names = "default";
+
+		reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000
+							 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		vdd-buck-supply = <&vreg_l15b_1p8>;
+		vdd-rxtx-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	pmic-glink {
+		compatible = "qcom,x1e80100-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 123 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 125 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss0_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss0_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss0_sbu: endpoint {
+						remote-endpoint = <&usb_1_ss0_sbu_mux>;
+					};
+				};
+			};
+		};
+
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss1_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss1_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss1_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss1_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss1_con_sbu_out>;
+					};
+				};
+			};
+		};
+
+		connector@2 {
+			compatible = "usb-c-connector";
+			reg = <2>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss2_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss2_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss2_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss2_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss2_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss2_con_sbu_out>;
+					};
+				};
+			};
+		};
+	};
+
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_NVME_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&nvme_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	/* Left unused as the retimer is not used on this board. */
+	vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr2_1p15: regulator-rtmr2-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR2_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&tlmm 189 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb2_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr2_1p8: regulator-rtmr2-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR2_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 126 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb2_pwr_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr2_3p3: regulator-rtmr2-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR2_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 187 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb2_pwr_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	/*
+	 * TODO: These two regulators are actually part of the removable M.2
+	 * card and not the EVK mainboard. Need to describe this differently.
+	 * Functionally it works correctly, because all we need to do is to
+	 * turn on the actual 3.3V supply above.
+	 */
+	vreg_wcn_0p95: regulator-wcn-0p95 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_0P95";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <950000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_1p9: regulator-wcn-1p9 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_1P9";
+		regulator-min-microvolt = <1900000>;
+		regulator-max-microvolt = <1900000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_3p3: regulator-wcn-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wcn_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vreg_wwan: regulator-wwan {
+		compatible = "regulator-fixed";
+
+		regulator-name = "SDX_VPH_PWR";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 221 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wwan_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	sound {
+		compatible = "qcom,x1e80100-sndcard";
+		model = "X1E80100-EVK";
+		audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT",
+				"TweeterLeft IN", "WSA WSA_SPK2 OUT",
+				"WooferRight IN", "WSA2 WSA_SPK2 OUT",
+				"TweeterRight IN", "WSA2 WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC2", "MIC BIAS2",
+				"VA DMIC0", "MIC BIAS3",
+				"VA DMIC1", "MIC BIAS3",
+				"VA DMIC2", "MIC BIAS1",
+				"VA DMIC3", "MIC BIAS1",
+				"TX SWR_INPUT1", "ADC2_OUTPUT";
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			codec {
+				sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			codec {
+				sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			codec {
+				sound-dai = <&left_woofer>,
+					    <&left_tweeter>,
+					    <&swr0 0>,
+					    <&lpass_wsamacro 0>,
+					    <&right_woofer>,
+					    <&right_tweeter>,
+					    <&swr3 0>,
+					    <&lpass_wsa2macro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		va-dai-link {
+			link-name = "VA Capture";
+
+			codec {
+				sound-dai = <&lpass_vamacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	usb-1-ss0-sbu-mux {
+		compatible = "onnn,fsusb42", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 168 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 167 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&usb_1_ss0_sbu_default>;
+		pinctrl-names = "default";
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usb_1_ss0_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_ss0_sbu>;
+			};
+		};
+	};
+
+	wcn7850-pmu {
+		compatible = "qcom,wcn7850-pmu";
+
+		vdd-supply = <&vreg_wcn_0p95>;
+		vddio-supply = <&vreg_l15b_1p8>;
+		vddaon-supply = <&vreg_wcn_0p95>;
+		vdddig-supply = <&vreg_wcn_0p95>;
+		vddrfa1p2-supply = <&vreg_wcn_1p9>;
+		vddrfa1p8-supply = <&vreg_wcn_1p9>;
+
+		bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+		wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&wcn_bt_en>;
+		pinctrl-names = "default";
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x08>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK5>;
+
+		vdd-supply = <&vreg_rtmr2_1p15>;
+		vdd33-supply = <&vreg_rtmr2_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr2_3p3>;
+		vddar-supply = <&vreg_rtmr2_1p15>;
+		vddat-supply = <&vreg_rtmr2_1p15>;
+		vddio-supply = <&vreg_rtmr2_1p8>;
+
+		reset-gpios = <&tlmm 185 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr2_default>;
+		pinctrl-names = "default";
+
+		orientation-switch;
+		retimer-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss2_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss2_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss2_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss2_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss2_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss2_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	eusb3_repeater: redriver@47 {
+		compatible = "nxp,ptn3222";
+		reg = <0x47>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb3_reset_n>;
+		pinctrl-names = "default";
+	};
+
+	eusb5_repeater: redriver@43 {
+		compatible = "nxp,ptn3222";
+		reg = <0x43>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 7 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb5_reset_n>;
+		pinctrl-names = "default";
+	};
+
+	eusb6_repeater: redriver@4f {
+		compatible = "nxp,ptn3222";
+		reg = <0x4f>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb6_reset_n>;
+		pinctrl-names = "default";
+	};
+};
+
+&i2c7 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x8>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK4>;
+
+		vdd-supply = <&vreg_rtmr1_1p15>;
+		vdd33-supply = <&vreg_rtmr1_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr1_3p3>;
+		vddar-supply = <&vreg_rtmr1_1p15>;
+		vddat-supply = <&vreg_rtmr1_1p15>;
+		vddio-supply = <&vreg_rtmr1_1p8>;
+
+		reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr1_default>;
+		pinctrl-names = "default";
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss1_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss1_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss1_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&lpass_tlmm {
+	spkr_01_sd_n_active: spkr-01-sd-n-active-state {
+		pins = "gpio12";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	spkr_23_sd_n_active: spkr-23-sd-n-active-state {
+		pins = "gpio13";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&lpass_vamacro {
+	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
+	pinctrl-names = "default";
+
+	vdd-micb-supply = <&vreg_l1b_1p8>;
+	qcom,dmic-sample-rate = <4800000>;
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp1 {
+	status = "okay";
+};
+
+&mdss_dp1_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp2 {
+	status = "okay";
+};
+
+&mdss_dp2_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp3 {
+	/delete-property/ #sound-dai-cells;
+
+	pinctrl-0 = <&edp0_hpd_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "edp-panel";
+			power-supply = <&vreg_edp_3p3>;
+
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss_dp3_out>;
+				};
+			};
+		};
+	};
+};
+
+&mdss_dp3_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+	remote-endpoint = <&edp_panel_in>;
+};
+
+&mdss_dp3_phy {
+	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pcie6a {
+	vddpe-3v3-supply = <&vreg_nvme>;
+};
+
+&pm8550_gpios {
+	rtmr0_default: rtmr0-reset-n-active-state {
+		pins = "gpio10";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+
+	usb0_3p3_reg_en: usb0-3p3-reg-en-state {
+		pins = "gpio11";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pm8550ve_9_gpios {
+	usb0_1p8_reg_en: usb0-1p8-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pmc8380_5_gpios {
+	usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&smb2360_0 {
+	status = "okay";
+};
+
+&smb2360_0_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1 {
+	status = "okay";
+};
+
+&smb2360_1_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&smb2360_2 {
+	status = "okay";
+};
+
+&smb2360_2_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l8b_3p0>;
+};
+
+&swr0 {
+	status = "okay";
+
+	pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
+	pinctrl-names = "default";
+
+	/* WSA8845, Left Woofer */
+	left_woofer: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "WooferLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Left Tweeter */
+	left_tweeter: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TweeterLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9385 RX */
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9385 TX */
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <2 2 3 4>;
+	};
+};
+
+&swr3 {
+	status = "okay";
+
+	pinctrl-0 = <&wsa2_swr_active>, <&spkr_23_sd_n_active>;
+	pinctrl-names = "default";
+
+	/* WSA8845, Right Woofer */
+	right_woofer: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "WooferRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Right Tweeter */
+	right_tweeter: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TweeterRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&tlmm {
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio70";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	eusb3_reset_n: eusb3-reset-n-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	eusb5_reset_n: eusb5-reset-n-state {
+		pins = "gpio7";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+		output-low;
+	};
+
+	eusb6_reset_n: eusb6-reset-n-state {
+		pins = "gpio184";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+		output-low;
+	};
+
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr1_default: rtmr1-reset-n-active-state {
+		pins = "gpio176";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	rtmr2_default: rtmr2-reset-n-active-state {
+		pins = "gpio185";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state {
+		pins = "gpio188";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state {
+		pins = "gpio175";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state {
+		pins = "gpio186";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb2_pwr_1p15_reg_en: usb2-pwr-1p15-reg-en-state {
+		pins = "gpio189";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb2_pwr_1p8_reg_en: usb2-pwr-1p8-reg-en-state {
+		pins = "gpio126";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb2_pwr_3p3_reg_en: usb2-pwr-3p3-reg-en-state {
+		pins = "gpio187";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb_1_ss0_sbu_default: usb-1-ss0-sbu-state {
+		mode-pins {
+			pins = "gpio166";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+			output-high;
+		};
+
+		oe-n-pins {
+			pins = "gpio168";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		sel-pins {
+			pins = "gpio167";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+		};
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio191";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	wcn_bt_en: wcn-bt-en-state {
+		pins = "gpio116";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wwan_sw_en: wwan-sw-en-state {
+		pins = "gpio221";
+		function = "gpio";
+		drive-strength = <4>;
+		bias-disable;
+	};
+
+	wcn_sw_en: wcn-sw-en-state {
+		pins = "gpio214";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	/* Switches USB signal routing between the USB connector and the Wi-Fi card. */
+	wcn_usb_sw_n: wcn-usb-sw-n-state {
+		pins = "gpio225";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-high;
+	};
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+		max-speed = <3200000>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+	};
+};
+
+&uart21 {
+	compatible = "qcom,geni-debug-uart";
+
+	status = "okay";
+};
+
+&usb_1_ss0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_hsphy {
+	phys = <&smb2360_0_eusb2_repeater>;
+};
+
+&usb_1_ss0_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss0_ss_in>;
+};
+
+&usb_1_ss1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_hsphy {
+	phys = <&smb2360_1_eusb2_repeater>;
+};
+
+&usb_1_ss1_qmpphy_out {
+	remote-endpoint = <&retimer_ss1_ss_in>;
+};
+
+&usb_1_ss2_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss2_hs_in>;
+};
+
+&usb_1_ss2_hsphy {
+	phys = <&smb2360_2_eusb2_repeater>;
+};
+
+&usb_1_ss2_qmpphy_out {
+	remote-endpoint = <&retimer_ss2_ss_in>;
+};
+
+&usb_2_hsphy {
+	phys = <&eusb5_repeater>;
+
+	pinctrl-0 = <&wcn_usb_sw_n>;
+	pinctrl-names = "default";
+};
+
+&usb_mp_hsphy0 {
+	phys = <&eusb3_repeater>;
+};
+
+&usb_mp_hsphy1 {
+	phys = <&eusb6_repeater>;
+};
diff --git a/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi b/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi
new file mode 100644
index 000000000000..1aead50b8920
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/hamoa-iot-som.dtsi
@@ -0,0 +1,619 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+#include "x1e80100.dtsi"
+#include "x1e80100-pmics.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+/ {
+	reserved-memory {
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+};
+
+&apps_rsc {
+	/* PMC8380C_B */
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob2>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l12-supply = <&vreg_s5j_1p2>;
+		vdd-l15-supply = <&vreg_s4c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p0: ldo5 {
+			regulator-name = "vreg_l5b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p8: ldo7 {
+			regulator-name = "vreg_l7b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_3p0: ldo8 {
+			regulator-name = "vreg_l8b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_1p8: ldo10 {
+			regulator-name = "vreg_l10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p2: ldo12 {
+			regulator-name = "vreg_l12b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p0: ldo14 {
+			regulator-name = "vreg_l14b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l16b_2p9: ldo16 {
+			regulator-name = "vreg_l16b_2p9";
+			regulator-min-microvolt = <2912000>;
+			regulator-max-microvolt = <2912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	/* PMC8380VE_C */
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s4c_1p8: smps4 {
+			regulator-name = "vreg_s4c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_0p8: ldo2 {
+			regulator-name = "vreg_l2c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	/* PMC8380_D */
+	regulators-2 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s4c_1p8>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_l1d_0p8: ldo1 {
+			regulator-name = "vreg_l1d_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p9: ldo2 {
+			regulator-name = "vreg_l2d_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_1p8: ldo3 {
+			regulator-name = "vreg_l3d_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	/* PMC8380_E */
+	regulators-3 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	/* PMC8380_F */
+	regulators-4 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_s1f_0p7: smps1 {
+			regulator-name = "vreg_s1f_0p7";
+			regulator-min-microvolt = <700000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_1p0: ldo1 {
+			regulator-name = "vreg_l1f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_1p0: ldo2 {
+			regulator-name = "vreg_l2f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_1p0: ldo3 {
+			regulator-name = "vreg_l3f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	/* PMC8380VE_I */
+	regulators-6 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "i";
+
+		vdd-l1-supply = <&vreg_s4c_1p8>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+
+		vreg_s1i_0p9: smps1 {
+			regulator-name = "vreg_s1i_0p9";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2i_1p0: smps2 {
+			regulator-name = "vreg_s2i_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_1p8: ldo1 {
+			regulator-name = "vreg_l1i_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_1p2: ldo2 {
+			regulator-name = "vreg_l2i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_0p8: ldo3 {
+			regulator-name = "vreg_l3i_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	/* PMC8380VE_J */
+	regulators-7 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "j";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s5j_1p2: smps5 {
+			regulator-name = "vreg_s5j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p8: ldo1 {
+			regulator-name = "vreg_l1j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3j_0p8: ldo3 {
+			regulator-name = "vreg_l3j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&iris {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/x1e80100/gen70500_zap.mbn";
+};
+
+&pcie4 {
+	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie4_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie6a {
+	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie6a_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie6a_phy {
+	vdda-phy-supply = <&vreg_l1d_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&qupv3_0 {
+	status = "okay";
+};
+
+&qupv3_1 {
+	status = "okay";
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/x1e80100/adsp.mbn",
+			"qcom/x1e80100/adsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/x1e80100/cdsp.mbn",
+			"qcom/x1e80100/cdsp_dtb.mbn";
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <34 2>, /* TPM LP & INT */
+			       <44 4>; /* SPI (TPM) */
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio147";
+			function = "pcie4_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio146";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie6a_default: pcie6a-default-state {
+		clkreq-n-pins {
+			pins = "gpio153";
+			function = "pcie6a_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio152";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio154";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+
+		};
+	};
+};
+
+&usb_1_ss0 {
+	status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_ss0_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l1j_0p8>;
+
+	status = "okay";
+};
+
+&usb_1_ss1 {
+	status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_ss1_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
+	status = "okay";
+};
+
+&usb_1_ss2 {
+	status = "okay";
+};
+
+&usb_1_ss2_dwc3 {
+	dr_mode = "otg";
+	usb-role-switch;
+};
+
+&usb_1_ss2_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&usb_1_ss2_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
+	status = "okay";
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_2_hsphy {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_mp {
+	status = "okay";
+};
+
+&usb_mp_hsphy0 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_mp_hsphy1 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
index 43def95e9275..df3cbb7c79c4 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts
@@ -120,5 +120,6 @@
 };
 
 &xo_board_clk {
-	clock-frequency = <24000000>;
+	clock-div = <4>;
+	clock-mult = <1>;
 };
diff --git a/arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dts b/arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dts
index 5bb021cb29cd..7a25af57749c 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5018-tplink-archer-ax55-v1.dts
@@ -124,5 +124,6 @@
 };
 
 &xo_board_clk {
-	clock-frequency = <24000000>;
+	clock-div = <4>;
+	clock-mult = <1>;
 };
diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
index 130360014c5e..f024b3cba33f 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
@@ -2,13 +2,15 @@
 /*
  * IPQ5018 SoC device tree source
  *
- * Copyright (c) 2023 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2023-2025 The Linux Foundation. All rights reserved.
  */
 
 #include <dt-bindings/clock/qcom,apss-ipq.h>
-#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/clock/qcom,gcc-ipq5018.h>
+#include <dt-bindings/clock/qcom,ipq5018-cmn-pll.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/reset/qcom,gcc-ipq5018.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&intc>;
@@ -16,14 +18,41 @@
 	#size-cells = <2>;
 
 	clocks {
+		gephy_rx_clk: gephy-rx-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <125000000>;
+			#clock-cells = <0>;
+		};
+
+		gephy_tx_clk: gephy-tx-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <125000000>;
+			#clock-cells = <0>;
+		};
+
+		ref_96mhz_clk: ref-96mhz-clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&xo_clk>;
+			#clock-cells = <0>;
+			clock-div = <1>;
+			clock-mult = <2>;
+		};
+
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 		};
 
 		xo_board_clk: xo-board-clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&ref_96mhz_clk>;
+			#clock-cells = <0>;
+		};
+
+		xo_clk: xo-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
+			clock-frequency = <48000000>;
 		};
 	};
 
@@ -39,6 +68,7 @@
 			next-level-cache = <&l2_0>;
 			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
 			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
 		};
 
 		cpu1: cpu@1 {
@@ -49,6 +79,7 @@
 			next-level-cache = <&l2_0>;
 			clocks = <&apcs_glb APCS_ALIAS0_CORE_CLK>;
 			operating-points-v2 = <&cpu_opp_table>;
+			#cooling-cells = <2>;
 		};
 
 		l2_0: l2-cache {
@@ -182,6 +213,201 @@
 			status = "disabled";
 		};
 
+		mdio0: mdio@88000 {
+			compatible = "qcom,ipq5018-mdio";
+			reg = <0x00088000 0x64>,
+			      <0x019475c4 0x4>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			clocks = <&gcc GCC_MDIO0_AHB_CLK>;
+			clock-names = "gcc_mdio_ahb_clk";
+
+			status = "disabled";
+
+			ge_phy: ethernet-phy@7 {
+				compatible = "ethernet-phy-id004d.d0c0";
+				reg = <7>;
+
+				resets = <&gcc GCC_GEPHY_MISC_ARES>;
+			};
+		};
+
+		mdio1: mdio@90000 {
+			compatible = "qcom,ipq5018-mdio";
+			reg = <0x00090000 0x64>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			clocks = <&gcc GCC_MDIO1_AHB_CLK>;
+			clock-names = "gcc_mdio_ahb_clk";
+
+			status = "disabled";
+		};
+
+		cmn_pll: clock-controller@9b000 {
+			compatible = "qcom,ipq5018-cmn-pll";
+			reg = <0x0009b000 0x800>;
+			clocks = <&ref_96mhz_clk>,
+				 <&gcc GCC_CMN_BLK_AHB_CLK>,
+				 <&gcc GCC_CMN_BLK_SYS_CLK>;
+			clock-names = "ref",
+				      "ahb",
+				      "sys";
+			#clock-cells = <1>;
+			assigned-clocks = <&cmn_pll IPQ5018_CMN_PLL_CLK>;
+			assigned-clock-rates-u64 = /bits/ 64 <9600000000>;
+		};
+
+		qfprom: qfprom@a0000 {
+			compatible = "qcom,ipq5018-qfprom", "qcom,qfprom";
+			reg = <0x000a0000 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			tsens_mode: mode@249 {
+				reg = <0x249 0x1>;
+				bits = <0 3>;
+			};
+
+			tsens_base1: base1@249 {
+				reg = <0x249 0x2>;
+				bits = <3 8>;
+			};
+
+			tsens_base2: base2@24a {
+				reg = <0x24a 0x2>;
+				bits = <3 8>;
+			};
+
+			tsens_s0_p1: s0-p1@24b {
+				reg = <0x24b 0x2>;
+				bits = <2 6>;
+			};
+
+			tsens_s0_p2: s0-p2@24c {
+				reg = <0x24c 0x1>;
+				bits = <1 6>;
+			};
+
+			tsens_s1_p1: s1-p1@24c {
+				reg = <0x24c 0x2>;
+				bits = <7 6>;
+			};
+
+			tsens_s1_p2: s1-p2@24d {
+				reg = <0x24d 0x2>;
+				bits = <5 6>;
+			};
+
+			tsens_s2_p1: s2-p1@24e {
+				reg = <0x24e 0x2>;
+				bits = <3 6>;
+			};
+
+			tsens_s2_p2: s2-p2@24f {
+				reg = <0x24f 0x1>;
+				bits = <1 6>;
+			};
+
+			tsens_s3_p1: s3-p1@24f {
+				reg = <0x24f 0x2>;
+				bits = <7 6>;
+			};
+
+			tsens_s3_p2: s3-p2@250 {
+				reg = <0x250 0x2>;
+				bits = <5 6>;
+			};
+
+			tsens_s4_p1: s4-p1@251 {
+				reg = <0x251 0x2>;
+				bits = <3 6>;
+			};
+
+			tsens_s4_p2: s4-p2@254 {
+				reg = <0x254 0x1>;
+				bits = <0 6>;
+			};
+		};
+
+		prng: rng@e3000 {
+			compatible = "qcom,prng-ee";
+			reg = <0x000e3000 0x1000>;
+			clocks = <&gcc GCC_PRNG_AHB_CLK>;
+			clock-names = "core";
+			status = "disabled";
+		};
+
+		tsens: thermal-sensor@4a9000 {
+			compatible = "qcom,ipq5018-tsens", "qcom,tsens-v1";
+			reg = <0x004a9000 0x1000>,
+			      <0x004a8000 0x1000>;
+
+			nvmem-cells = <&tsens_mode>,
+				      <&tsens_base1>,
+				      <&tsens_base2>,
+				      <&tsens_s0_p1>,
+				      <&tsens_s0_p2>,
+				      <&tsens_s1_p1>,
+				      <&tsens_s1_p2>,
+				      <&tsens_s2_p1>,
+				      <&tsens_s2_p2>,
+				      <&tsens_s3_p1>,
+				      <&tsens_s3_p2>,
+				      <&tsens_s4_p1>,
+				      <&tsens_s4_p2>;
+
+			nvmem-cell-names = "mode",
+					   "base1",
+					   "base2",
+					   "s0_p1",
+					   "s0_p2",
+					   "s1_p1",
+					   "s1_p2",
+					   "s2_p1",
+					   "s2_p2",
+					   "s3_p1",
+					   "s3_p2",
+					   "s4_p1",
+					   "s4_p2";
+
+			interrupts = <GIC_SPI 184 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "uplow";
+			#qcom,sensors = <5>;
+			#thermal-sensor-cells = <1>;
+		};
+
+		cryptobam: dma-controller@704000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0x00704000 0x20000>;
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_CRYPTO_AHB_CLK>;
+			clock-names = "bam_clk";
+
+			#dma-cells = <1>;
+			qcom,ee = <1>;
+			qcom,controlled-remotely;
+		};
+
+		crypto: crypto@73a000 {
+			compatible = "qcom,crypto-v5.1";
+			reg = <0x0073a000 0x6000>;
+
+			clocks = <&gcc GCC_CRYPTO_AHB_CLK>,
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_CLK>;
+			clock-names = "iface",
+				      "bus",
+				      "core";
+
+			dmas = <&cryptobam 2>,
+			       <&cryptobam 3>;
+			dma-names = "rx",
+				    "tx";
+		};
+
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,ipq5018-tlmm";
 			reg = <0x01000000 0x300000>;
@@ -208,8 +434,8 @@
 				 <&pcie0_phy>,
 				 <&pcie1_phy>,
 				 <0>,
-				 <0>,
-				 <0>,
+				 <&gephy_rx_clk>,
+				 <&gephy_tx_clk>,
 				 <0>,
 				 <0>;
 			#clock-cells = <1>;
@@ -264,6 +490,16 @@
 			status = "disabled";
 		};
 
+		blsp1_uart2: serial@78b0000 {
+			compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
+			reg = <0x078b0000 0x200>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_UART2_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			status = "disabled";
+		};
+
 		blsp1_spi1: spi@78b5000 {
 			compatible = "qcom,spi-qup-v2.2.1";
 			#address-cells = <1>;
@@ -278,6 +514,59 @@
 			status = "disabled";
 		};
 
+		blsp1_i2c3: i2c@78b7000 {
+			compatible = "qcom,i2c-qup-v2.2.1";
+			reg = <0x078b7000 0x600>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+				 <&gcc GCC_BLSP1_AHB_CLK>;
+			clock-names = "core", "iface";
+			clock-frequency = <400000>;
+			dmas = <&blsp_dma 9>, <&blsp_dma 8>;
+			dma-names = "tx", "rx";
+			status = "disabled";
+		};
+
+		qpic_bam: dma-controller@7984000 {
+			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
+			reg = <0x07984000 0x1c000>;
+
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_QPIC_AHB_CLK>;
+			clock-names = "bam_clk";
+
+			#dma-cells = <1>;
+			qcom,ee = <0>;
+
+			status = "disabled";
+		};
+
+		qpic_nand: spi@79b0000 {
+			compatible = "qcom,ipq5018-snand", "qcom,ipq9574-snand";
+			reg = <0x079b0000 0x10000>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			clocks = <&gcc GCC_QPIC_CLK>,
+				 <&gcc GCC_QPIC_AHB_CLK>,
+				 <&gcc GCC_QPIC_IO_MACRO_CLK>;
+			clock-names = "core",
+				      "aon",
+				      "iom";
+
+			dmas = <&qpic_bam 0>,
+			       <&qpic_bam 1>,
+			       <&qpic_bam 2>;
+			dma-names = "tx",
+				    "rx",
+				    "cmd";
+
+			status = "disabled";
+		};
+
 		usb: usb@8af8800 {
 			compatible = "qcom,ipq5018-dwc3", "qcom,dwc3";
 			reg = <0x08af8800 0x400>;
@@ -453,7 +742,7 @@
 			max-link-speed = <2>;
 
 			phys = <&pcie1_phy>;
-			phy-names ="pciephy";
+			phy-names = "pciephy";
 
 			ranges = <0x01000000 0 0x00000000 0x80200000 0 0x00100000>,
 				 <0x02000000 0 0x80300000 0x80300000 0 0x10000000>;
@@ -481,10 +770,10 @@
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 142 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 143 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 144 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 145 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>,
 				 <&gcc GCC_PCIE1_AXI_M_CLK>,
@@ -554,7 +843,7 @@
 			max-link-speed = <2>;
 
 			phys = <&pcie0_phy>;
-			phy-names ="pciephy";
+			phy-names = "pciephy";
 
 			ranges = <0x01000000 0 0x00000000 0xa0200000 0 0x00100000>,
 				 <0x02000000 0 0xa0300000 0xa0300000 0 0x10000000>;
@@ -582,10 +871,10 @@
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 75 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 78 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 79 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
 				 <&gcc GCC_PCIE0_AXI_M_CLK>,
@@ -631,6 +920,70 @@
 		};
 	};
 
+	thermal-zones {
+		cpu-thermal {
+			thermal-sensors = <&tsens 2>;
+
+			trips {
+				cpu-critical {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+
+				cpu_alert: cpu-passive {
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert>;
+					cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+							 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gephy-thermal {
+			thermal-sensors = <&tsens 4>;
+
+			trips {
+				gephy-critical {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		top-glue-thermal {
+			thermal-sensors = <&tsens 3>;
+
+			trips {
+				top-glue-critical {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		ubi32-thermal {
+			thermal-sensors = <&tsens 1>;
+
+			trips {
+				ubi32-critical {
+					temperature = <120000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
diff --git a/arch/arm64/boot/dts/qcom/ipq5332.dtsi b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
index bd28c490415f..45fc512a3bab 100644
--- a/arch/arm64/boot/dts/qcom/ipq5332.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5332.dtsi
@@ -632,10 +632,10 @@
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 412 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 413 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 414 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 415 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI 413 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI 414 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE3X2_AXI_M_CLK>,
 				 <&gcc GCC_PCIE3X2_AXI_S_CLK>,
@@ -736,10 +736,10 @@
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 35 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 36 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 37 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 38 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE3X1_0_AXI_M_CLK>,
 				 <&gcc GCC_PCIE3X1_0_AXI_S_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
index 1f89530cb035..738618551203 100644
--- a/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
+++ b/arch/arm64/boot/dts/qcom/ipq5424-rdp466.dts
@@ -2,7 +2,7 @@
 /*
  * IPQ5424 RDP466 board device tree source
  *
- * Copyright (c) 2024 The Linux Foundation. All rights reserved.
+ * Copyright (c) 2024-2025 The Linux Foundation. All rights reserved.
  */
 
 /dts-v1/;
@@ -224,6 +224,13 @@
 		};
 	};
 
+	uart0_pins: uart0-default-state {
+		pins = "gpio10", "gpio11", "gpio12", "gpio13";
+		function = "uart0";
+		drive-strength = <8>;
+		bias-pull-down;
+	};
+
 	pcie2_default_state: pcie2-default-state {
 		pins = "gpio31";
 		function = "gpio";
@@ -239,6 +246,17 @@
 	};
 };
 
+&uart0 {
+	pinctrl-0 = <&uart0_pins>;
+	pinctrl-names = "default";
+	/*
+	 * The required initialization for this SE is not handled by the
+	 * bootloader. Therefore, keep the device in "reserved" state until
+	 * linux gains support for configuring the SE.
+	 */
+	status = "reserved";
+};
+
 &uart1 {
 	pinctrl-0 = <&uart1_pins>;
 	pinctrl-names = "default";
@@ -253,6 +271,26 @@
 	status = "okay";
 };
 
+/*
+ * The bootstrap pins for the board select the XO clock frequency that
+ * supports 48 MHZ, 96 MHZ or 192 MHZ. This setting automatically
+ * enables the right dividers, to ensure the reference clock output
+ * from WiFi to the CMN PLL is 48 MHZ.
+ */
+&ref_48mhz_clk {
+	clock-div = <1>;
+	clock-mult = <1>;
+};
+
+/*
+ * The frequency of xo_board is fixed to 24 MHZ, which is routed
+ * from WiFi output clock 48 MHZ divided by 2.
+ */
 &xo_board {
-	clock-frequency = <24000000>;
+	clock-div = <2>;
+	clock-mult = <1>;
+};
+
+&xo_clk {
+	clock-frequency = <48000000>;
 };
diff --git a/arch/arm64/boot/dts/qcom/ipq5424.dtsi b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
index 66bd2261eb25..ef2b52f3597d 100644
--- a/arch/arm64/boot/dts/qcom/ipq5424.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5424.dtsi
@@ -3,10 +3,12 @@
  * IPQ5424 device tree source
  *
  * Copyright (c) 2020-2021 The Linux Foundation. All rights reserved.
- * Copyright (c) 2022-2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2022-2025 Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/clock/qcom,apss-ipq.h>
+#include <dt-bindings/clock/qcom,ipq5424-cmn-pll.h>
 #include <dt-bindings/clock/qcom,ipq5424-gcc.h>
 #include <dt-bindings/reset/qcom,ipq5424-gcc.h>
 #include <dt-bindings/interconnect/qcom,ipq5424.h>
@@ -18,12 +20,24 @@
 	interrupt-parent = <&intc>;
 
 	clocks {
+		ref_48mhz_clk: ref-48mhz-clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&xo_clk>;
+			#clock-cells = <0>;
+		};
+
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 		};
 
 		xo_board: xo-board-clk {
+			compatible = "fixed-factor-clock";
+			clocks = <&ref_48mhz_clk>;
+			#clock-cells = <0>;
+		};
+
+		xo_clk: xo-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
 		};
@@ -39,6 +53,11 @@
 			reg = <0x0>;
 			enable-method = "psci";
 			next-level-cache = <&l2_0>;
+			clocks = <&apss_clk APSS_SILVER_CORE_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+			interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>;
+
 			l2_0: l2-cache {
 				compatible = "cache";
 				cache-level = <2>;
@@ -59,6 +78,10 @@
 			enable-method = "psci";
 			reg = <0x100>;
 			next-level-cache = <&l2_100>;
+			clocks = <&apss_clk APSS_SILVER_CORE_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+			interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>;
 
 			l2_100: l2-cache {
 				compatible = "cache";
@@ -74,6 +97,10 @@
 			enable-method = "psci";
 			reg = <0x200>;
 			next-level-cache = <&l2_200>;
+			clocks = <&apss_clk APSS_SILVER_CORE_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+			interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>;
 
 			l2_200: l2-cache {
 				compatible = "cache";
@@ -89,6 +116,10 @@
 			enable-method = "psci";
 			reg = <0x300>;
 			next-level-cache = <&l2_300>;
+			clocks = <&apss_clk APSS_SILVER_CORE_CLK>;
+			clock-names = "cpu";
+			operating-points-v2 = <&cpu_opp_table>;
+			interconnects = <&apss_clk MASTER_CPU &apss_clk SLAVE_L3>;
 
 			l2_300: l2-cache {
 				compatible = "cache";
@@ -106,6 +137,36 @@
 		};
 	};
 
+	cpu_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2-kryo-cpu";
+		opp-shared;
+		nvmem-cells = <&cpu_speed_bin>;
+
+		opp-816000000 {
+			opp-hz = /bits/ 64 <816000000>;
+			opp-microvolt = <850000>;
+			opp-supported-hw = <0x3>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <816000>;
+		};
+
+		opp-1416000000 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <850000>;
+			opp-supported-hw = <0x3>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <984000>;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1000000>;
+			opp-supported-hw = <0x1>;
+			clock-latency-ns = <200000>;
+			opp-peak-kBps = <1272000>;
+		};
+	};
+
 	memory@80000000 {
 		device_type = "memory";
 		/* We expect the bootloader to fill in the size */
@@ -150,6 +211,12 @@
 
 			hwlocks = <&tcsr_mutex 3>;
 		};
+
+		tfa@8a832000 {
+			reg = <0x0 0x8a832000 0x0 0x7d000>;
+			no-map;
+			status = "disabled";
+		};
 	};
 
 	soc@0 {
@@ -210,6 +277,18 @@
 			status = "disabled";
 		};
 
+		cmn_pll: clock-controller@9b000 {
+			compatible = "qcom,ipq5424-cmn-pll";
+			reg = <0 0x0009b000 0 0x800>;
+			clocks = <&ref_48mhz_clk>,
+				 <&gcc GCC_CMN_12GPLL_AHB_CLK>,
+				 <&gcc GCC_CMN_12GPLL_SYS_CLK>;
+			clock-names = "ref", "ahb", "sys";
+			#clock-cells = <1>;
+			assigned-clocks = <&cmn_pll IPQ5424_CMN_PLL_CLK>;
+			assigned-clock-rates-u64 = /bits/ 64 <12000000000>;
+		};
+
 		efuse@a4000 {
 			compatible = "qcom,ipq5424-qfprom", "qcom,qfprom";
 			reg = <0 0x000a4000 0 0x741>;
@@ -363,6 +442,18 @@
 			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		qfprom@a6000 {
+			compatible = "qcom,ipq5424-qfprom", "qcom,qfprom";
+			reg = <0x0 0x000a6000 0x0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			cpu_speed_bin: cpu-speed-bin@234 {
+				reg = <0x234 0x1>;
+				bits = <0 8>;
+			};
+		};
+
 		tlmm: pinctrl@1000000 {
 			compatible = "qcom,ipq5424-tlmm";
 			reg = <0 0x01000000 0 0x300000>;
@@ -417,6 +508,15 @@
 			#address-cells = <2>;
 			#size-cells = <2>;
 
+			uart0: serial@1a80000 {
+				compatible = "qcom,geni-uart";
+				reg = <0 0x01a80000 0 0x4000>;
+				clocks = <&gcc GCC_QUPV3_UART0_CLK>;
+				clock-names = "se";
+				interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
+				status = "disabled";
+			};
+
 			uart1: serial@1a84000 {
 				compatible = "qcom,geni-debug-uart";
 				reg = <0 0x01a84000 0 0x4000>;
@@ -471,6 +571,7 @@
 			compatible = "arm,gic-v3";
 			reg = <0 0xf200000 0 0x10000>, /* GICD */
 			      <0 0xf240000 0 0x80000>; /* GICR * 4 regions */
+			#address-cells = <0>;
 			#interrupt-cells = <0x3>;
 			interrupt-controller;
 			#redistributor-regions = <1>;
@@ -705,6 +806,15 @@
 			};
 		};
 
+		apss_clk: clock-controller@fa80000 {
+			compatible = "qcom,ipq5424-apss-clk";
+			reg = <0x0 0x0fa80000 0x0 0x20000>;
+			clocks = <&xo_board>,
+				 <&gcc GPLL0>;
+			#clock-cells = <1>;
+			#interconnect-cells = <1>;
+		};
+
 		pcie3: pcie@40000000 {
 			compatible = "qcom,pcie-ipq5424", "qcom,pcie-ipq9574";
 			reg = <0x0 0x40000000 0x0 0xf1c>,
@@ -752,10 +862,10 @@
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 479 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 480 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 481 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 482 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 479 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc GIC_SPI 480 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc GIC_SPI 481 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc GIC_SPI 482 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE3_AXI_M_CLK>,
 				 <&gcc GCC_PCIE3_AXI_S_CLK>,
@@ -855,10 +965,10 @@
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 464 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 465 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 466 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 467 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE2_AXI_M_CLK>,
 				 <&gcc GCC_PCIE2_AXI_S_CLK>,
@@ -958,10 +1068,10 @@
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 449 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 450 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 451 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 452 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 449 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc GIC_SPI 450 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc GIC_SPI 451 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc GIC_SPI 452 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE1_AXI_M_CLK>,
 				 <&gcc GCC_PCIE1_AXI_S_CLK>,
@@ -1061,10 +1171,10 @@
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0x0 0x0 0x0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 436 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 437 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc GIC_SPI 436 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc GIC_SPI 437 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE0_AXI_M_CLK>,
 				 <&gcc GCC_PCIE0_AXI_S_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/ipq6018.dtsi b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
index bfe59b020841..40f1c262126e 100644
--- a/arch/arm64/boot/dts/qcom/ipq6018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq6018.dtsi
@@ -906,10 +906,10 @@
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
 				 <&gcc GCC_PCIE0_AXI_M_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/ipq8074.dtsi b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
index fffb47ec2448..256e12cf6d54 100644
--- a/arch/arm64/boot/dts/qcom/ipq8074.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq8074.dtsi
@@ -867,13 +867,13 @@
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 142
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 142
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 143
+					<0 0 0 2 &intc 0 GIC_SPI 143
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 144
+					<0 0 0 3 &intc 0 GIC_SPI 144
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 145
+					<0 0 0 4 &intc 0 GIC_SPI 145
 					 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE1_AXI_CLK>,
@@ -955,13 +955,13 @@
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 75
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 75
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 78
+					<0 0 0 2 &intc 0 GIC_SPI 78
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 79
+					<0 0 0 3 &intc 0 GIC_SPI 79
 					 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 83
+					<0 0 0 4 &intc 0 GIC_SPI 83
 					 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_SYS_NOC_PCIE0_AXI_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
index fa7bb521e786..5a546a14998b 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
+++ b/arch/arm64/boot/dts/qcom/ipq9574-rdp433.dts
@@ -128,36 +128,4 @@
 			bias-pull-up;
 		};
 	};
-
-	sdc_default_state: sdc-default-state {
-		clk-pins {
-			pins = "gpio5";
-			function = "sdc_clk";
-			drive-strength = <8>;
-			bias-disable;
-		};
-
-		cmd-pins {
-			pins = "gpio4";
-			function = "sdc_cmd";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		data-pins {
-			pins = "gpio0", "gpio1", "gpio2",
-			       "gpio3", "gpio6", "gpio7",
-			       "gpio8", "gpio9";
-			function = "sdc_data";
-			drive-strength = <8>;
-			bias-pull-up;
-		};
-
-		rclk-pins {
-			pins = "gpio10";
-			function = "sdc_rclk";
-			drive-strength = <8>;
-			bias-pull-down;
-		};
-	};
 };
diff --git a/arch/arm64/boot/dts/qcom/ipq9574.dtsi b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
index 815b5f9540b8..86c9cb9fffc9 100644
--- a/arch/arm64/boot/dts/qcom/ipq9574.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq9574.dtsi
@@ -946,10 +946,10 @@
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 35 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 49 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 84 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 85 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE1_AXI_M_CLK>,
 				 <&gcc GCC_PCIE1_AXI_S_CLK>,
@@ -1032,10 +1032,10 @@
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 189 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 190 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 191 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 192 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE3_AXI_M_CLK>,
 				 <&gcc GCC_PCIE3_AXI_S_CLK>,
@@ -1118,10 +1118,10 @@
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 164 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 165 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 186 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 187 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI 165 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE2_AXI_M_CLK>,
 				 <&gcc GCC_PCIE2_AXI_S_CLK>,
@@ -1161,7 +1161,7 @@
 			status = "disabled";
 		};
 
-		pcie0: pci@28000000 {
+		pcie0: pcie@28000000 {
 			compatible = "qcom,pcie-ipq9574";
 			reg = <0x28000000 0xf1d>,
 			      <0x28000f20 0xa8>,
@@ -1203,10 +1203,10 @@
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 75 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 78 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 79 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE0_AXI_M_CLK>,
 				 <&gcc GCC_PCIE0_AXI_S_CLK>,
diff --git a/arch/arm64/boot/dts/qcom/lemans-auto.dtsi b/arch/arm64/boot/dts/qcom/lemans-auto.dtsi
new file mode 100644
index 000000000000..8db958d60fd1
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/lemans-auto.dtsi
@@ -0,0 +1,104 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/dts-v1/;
+
+#include "lemans.dtsi"
+
+/delete-node/ &pil_camera_mem;
+/delete-node/ &pil_adsp_mem;
+/delete-node/ &q6_adsp_dtb_mem;
+/delete-node/ &q6_gdsp0_dtb_mem;
+/delete-node/ &pil_gdsp0_mem;
+/delete-node/ &pil_gdsp1_mem;
+/delete-node/ &q6_gdsp1_dtb_mem;
+/delete-node/ &q6_cdsp0_dtb_mem;
+/delete-node/ &pil_cdsp0_mem;
+/delete-node/ &pil_gpu_mem;
+/delete-node/ &pil_cdsp1_mem;
+/delete-node/ &q6_cdsp1_dtb_mem;
+/delete-node/ &pil_cvp_mem;
+/delete-node/ &pil_video_mem;
+/delete-node/ &gunyah_md_mem;
+
+/ {
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		tz_ffi_mem: tz-ffi@91c00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x91c00000 0x0 0x1400000>;
+			no-map;
+		};
+
+		pil_camera_mem: pil-camera@95200000 {
+			reg = <0x0 0x95200000 0x0 0x500000>;
+			no-map;
+		};
+
+		pil_adsp_mem: pil-adsp@95c00000 {
+			reg = <0x0 0x95c00000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_gdsp0_mem: pil-gdsp0@97b00000 {
+			reg = <0x0 0x97b00000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_gdsp1_mem: pil-gdsp1@99900000 {
+			reg = <0x0 0x99900000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_cdsp0_mem: pil-cdsp0@9b800000 {
+			reg = <0x0 0x9b800000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_gpu_mem: pil-gpu@9d600000 {
+			reg = <0x0 0x9d600000 0x0 0x2000>;
+			no-map;
+		};
+
+		pil_cdsp1_mem: pil-cdsp1@9d700000 {
+			reg = <0x0 0x9d700000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_cvp_mem: pil-cvp@9f500000 {
+			reg = <0x0 0x9f500000 0x0 0x700000>;
+			no-map;
+		};
+
+		pil_video_mem: pil-video@9fc00000 {
+			reg = <0x0 0x9fc00000 0x0 0x700000>;
+			no-map;
+		};
+
+		audio_mdf_mem: audio-mdf-region@ae000000 {
+			reg = <0x0 0xae000000 0x0 0x1000000>;
+			no-map;
+		};
+
+		hyptz_reserved_mem: hyptz-reserved@beb00000 {
+			reg = <0x0 0xbeb00000 0x0 0x11500000>;
+			no-map;
+		};
+
+		trusted_apps_mem: trusted-apps@d1900000 {
+			reg = <0x0 0xd1900000 0x0 0x3800000>;
+			no-map;
+		};
+	};
+
+	firmware {
+		scm {
+			memory-region = <&tz_ffi_mem>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/lemans-evk-camera-csi1-imx577.dtso b/arch/arm64/boot/dts/qcom/lemans-evk-camera-csi1-imx577.dtso
new file mode 100644
index 000000000000..769befadd4e4
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/lemans-evk-camera-csi1-imx577.dtso
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/qcom,sa8775p-camcc.h>
+#include <dt-bindings/gpio/gpio.h>
+
+&{/} {
+	vreg_cam1_1p8: regulator-cam1 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_cam1";
+		startup-delay-us = <10000>;
+		enable-active-high;
+		gpio = <&pmm8654au_0_gpios 8 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&camss {
+	vdda-pll-supply = <&vreg_l1c>;
+	vdda-phy-supply = <&vreg_l4a>;
+
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+
+			csiphy1_ep: endpoint {
+				clock-lanes = <7>;
+				data-lanes = <0 1 2 3>;
+				remote-endpoint = <&imx577_ep1>;
+			};
+		};
+	};
+};
+
+&cci1 {
+	pinctrl-0 = <&cci1_0_default>;
+	pinctrl-1 = <&cci1_0_sleep>;
+
+	status = "okay";
+};
+
+&cci1_i2c0 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	camera@1a {
+		compatible = "sony,imx577";
+		reg = <0x1a>;
+
+		reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&cam1_default>;
+		pinctrl-names = "default";
+
+		clocks = <&camcc CAM_CC_MCLK1_CLK>;
+		assigned-clocks = <&camcc CAM_CC_MCLK1_CLK>;
+		assigned-clock-rates = <24000000>;
+
+		dovdd-supply = <&vreg_s4a>;
+		avdd-supply = <&vreg_cam1_1p8>;
+
+		port {
+			imx577_ep1: endpoint {
+				clock-lanes = <7>;
+				link-frequencies = /bits/ 64 <600000000>;
+				data-lanes = <0 1 2 3>;
+				remote-endpoint = <&csiphy1_ep>;
+			};
+		};
+	};
+};
+
+&tlmm {
+	cam1_default: cam1-default-state {
+		mclk-pins {
+			pins = "gpio73";
+			function = "cam_mclk";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		rst-pins {
+			pins = "gpio133";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/lemans-evk.dts b/arch/arm64/boot/dts/qcom/lemans-evk.dts
new file mode 100644
index 000000000000..c7dc9b8f4457
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/lemans-evk.dts
@@ -0,0 +1,776 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024-2025, Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "lemans.dtsi"
+#include "lemans-pmics.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. Lemans EVK";
+	compatible = "qcom,lemans-evk", "qcom,qcs9100", "qcom,sa8775p";
+
+	aliases {
+		ethernet0 = &ethernet0;
+		mmc1 = &sdhc;
+		serial0 = &uart10;
+	};
+
+	dmic: audio-codec-0 {
+		compatible = "dmic-codec";
+		#sound-dai-cells = <0>;
+		num-channels = <1>;
+	};
+
+	max98357a: audio-codec-1 {
+		compatible = "maxim,max98357a";
+		#sound-dai-cells = <0>;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	edp0-connector {
+		compatible = "dp-connector";
+		label = "EDP0";
+		type = "mini";
+
+		port {
+			edp0_connector_in: endpoint {
+				remote-endpoint = <&mdss0_dp0_out>;
+			};
+		};
+	};
+
+	edp1-connector {
+		compatible = "dp-connector";
+		label = "EDP1";
+		type = "mini";
+
+		port {
+			edp1_connector_in: endpoint {
+				remote-endpoint = <&mdss0_dp1_out>;
+			};
+		};
+	};
+
+	sound {
+		compatible = "qcom,qcs9100-sndcard";
+		model = "LEMANS-EVK";
+
+		pinctrl-0 = <&hs0_mi2s_active>, <&hs2_mi2s_active>;
+		pinctrl-names = "default";
+
+		hs0-mi2s-playback-dai-link {
+			link-name = "HS0 MI2S Playback";
+
+			codec {
+				sound-dai = <&max98357a>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai PRIMARY_MI2S_RX>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		hs2-mi2s-capture-dai-link {
+			link-name = "HS2 MI2S Capture";
+
+			codec {
+				sound-dai = <&dmic>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai TERTIARY_MI2S_TX>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	vmmc_sdc: regulator-vmmc-sdc {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vmmc_sdc";
+		regulator-min-microvolt = <2950000>;
+		regulator-max-microvolt = <2950000>;
+	};
+
+	vreg_sdc: regulator-vreg-sdc {
+		compatible = "regulator-gpio";
+
+		regulator-name = "vreg_sdc";
+		regulator-type = "voltage";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <2950000>;
+
+		gpios = <&expander1 7 GPIO_ACTIVE_HIGH>;
+		states = <1800000 1>, <2950000 0>;
+
+		startup-delay-us = <100>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_s4a: smps4 {
+			regulator-name = "vreg_s4a";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1816000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s5a: smps5 {
+			regulator-name = "vreg_s5a";
+			regulator-min-microvolt = <1850000>;
+			regulator-max-microvolt = <1996000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s9a: smps9 {
+			regulator-name = "vreg_s9a";
+			regulator-min-microvolt = <535000>;
+			regulator-max-microvolt = <1120000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4a: ldo4 {
+			regulator-name = "vreg_l4a";
+			regulator-min-microvolt = <788000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a: ldo5 {
+			regulator-name = "vreg_l5a";
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a: ldo6 {
+			regulator-name = "vreg_l6a";
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a: ldo7 {
+			regulator-name = "vreg_l7a";
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a: ldo8 {
+			regulator-name = "vreg_l8a";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a: ldo9 {
+			regulator-name = "vreg_l9a";
+			regulator-min-microvolt = <2970000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_l1c: ldo1 {
+			regulator-name = "vreg_l1c";
+			regulator-min-microvolt = <1140000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c: ldo2 {
+			regulator-name = "vreg_l2c";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c: ldo3 {
+			regulator-name = "vreg_l3c";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c: ldo4 {
+			regulator-name = "vreg_l4c";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c: ldo5 {
+			regulator-name = "vreg_l5c";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c: ldo6 {
+			regulator-name = "vreg_l6c";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c: ldo7 {
+			regulator-name = "vreg_l7c";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c: ldo8 {
+			regulator-name = "vreg_l8c";
+			regulator-min-microvolt = <2400000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c: ldo9 {
+			regulator-name = "vreg_l9c";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2700000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vreg_s4e: smps4 {
+			regulator-name = "vreg_s4e";
+			regulator-min-microvolt = <970000>;
+			regulator-max-microvolt = <1520000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s7e: smps7 {
+			regulator-name = "vreg_s7e";
+			regulator-min-microvolt = <1010000>;
+			regulator-max-microvolt = <1170000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s9e: smps9 {
+			regulator-name = "vreg_s9e";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <570000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6e: ldo6 {
+			regulator-name = "vreg_l6e";
+			regulator-min-microvolt = <1280000>;
+			regulator-max-microvolt = <1450000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8e: ldo8 {
+			regulator-name = "vreg_l8e";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1950000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&ethernet0 {
+	phy-handle = <&hsgmii_phy0>;
+	phy-mode = "2500base-x";
+
+	pinctrl-0 = <&ethernet0_default>;
+	pinctrl-names = "default";
+
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+
+	nvmem-cells = <&mac_addr0>;
+	nvmem-cell-names = "mac-address";
+
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hsgmii_phy0: ethernet-phy@1c {
+			compatible = "ethernet-phy-id004d.d101";
+			reg = <0x1c>;
+			reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <11000>;
+			reset-deassert-us = <70000>;
+		};
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <4>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x0>;
+			snps,route-up;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x1>;
+			snps,route-ptp;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x2>;
+			snps,route-avcp;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x3>;
+			snps,priority = <0xc>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <4>;
+
+		queue0 {
+			snps,dcb-algorithm;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+	};
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
+&i2c18 {
+	status = "okay";
+
+	expander0: gpio@38 {
+		compatible = "ti,tca9538";
+		reg = <0x38>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	expander1: gpio@39 {
+		compatible = "ti,tca9538";
+		reg = <0x39>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	expander2: gpio@3a {
+		compatible = "ti,tca9538";
+		reg = <0x3a>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	expander3: gpio@3b {
+		compatible = "ti,tca9538";
+		reg = <0x3b>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	eeprom@50 {
+		compatible = "giantec,gt24c256c", "atmel,24c256";
+		reg = <0x50>;
+		pagesize = <64>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			mac_addr0: mac-addr@0 {
+				reg = <0x0 0x6>;
+			};
+		};
+	};
+};
+
+&iris {
+	firmware-name = "qcom/vpu/vpu30_p4_s6_16mb.mbn";
+
+	status = "okay";
+};
+
+&mdss0 {
+	status = "okay";
+};
+
+&mdss0_dp0 {
+	pinctrl-0 = <&dp0_hot_plug_det>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&mdss0_dp0_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+	remote-endpoint = <&edp0_connector_in>;
+};
+
+&mdss0_dp0_phy {
+	vdda-phy-supply = <&vreg_l1c>;
+	vdda-pll-supply = <&vreg_l4a>;
+
+	status = "okay";
+};
+
+&mdss0_dp1 {
+	pinctrl-0 = <&dp1_hot_plug_det>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&mdss0_dp1_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+	remote-endpoint = <&edp1_connector_in>;
+};
+
+&mdss0_dp1_phy {
+	vdda-phy-supply = <&vreg_l1c>;
+	vdda-pll-supply = <&vreg_l4a>;
+
+	status = "okay";
+};
+
+&pcie0 {
+	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&pcie0_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l5a>;
+	vdda-pll-supply = <&vreg_l1c>;
+
+	status = "okay";
+};
+
+&pcie1 {
+	perst-gpios = <&tlmm 4 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 5 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&pcie1_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l5a>;
+	vdda-pll-supply = <&vreg_l1c>;
+
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&qupv3_id_2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/sa8775p/adsp.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp0 {
+	firmware-name = "qcom/sa8775p/cdsp0.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp1 {
+	firmware-name = "qcom/sa8775p/cdsp1.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_gpdsp0 {
+	firmware-name = "qcom/sa8775p/gpdsp0.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_gpdsp1 {
+	firmware-name = "qcom/sa8775p/gpdsp1.mbn";
+
+	status = "okay";
+};
+
+&sdhc {
+	vmmc-supply = <&vmmc_sdc>;
+	vqmmc-supply = <&vreg_sdc>;
+
+	pinctrl-0 = <&sdc_default>, <&sd_cd>;
+	pinctrl-1 = <&sdc_sleep>, <&sd_cd>;
+	pinctrl-names = "default", "sleep";
+
+	bus-width = <4>;
+	cd-gpios = <&tlmm 36 GPIO_ACTIVE_LOW>;
+	no-mmc;
+	no-sdio;
+
+	status = "okay";
+};
+
+&serdes0 {
+	phy-supply = <&vreg_l5a>;
+
+	status = "okay";
+};
+
+&sleep_clk {
+	clock-frequency = <32768>;
+};
+
+&tlmm {
+	ethernet0_default: ethernet0-default-state {
+		ethernet0_mdc: ethernet0-mdc-pins {
+			pins = "gpio8";
+			function = "emac0_mdc";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		ethernet0_mdio: ethernet0-mdio-pins {
+			pins = "gpio9";
+			function = "emac0_mdio";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+	};
+
+	pcie0_default_state: pcie0-default-state {
+		clkreq-pins {
+			pins = "gpio1";
+			function = "pcie0_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-pins {
+			pins = "gpio2";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		wake-pins {
+			pins = "gpio0";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie1_default_state: pcie1-default-state {
+		clkreq-pins {
+			pins = "gpio3";
+			function = "pcie1_clkreq";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-pins {
+			pins = "gpio4";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		wake-pins {
+			pins = "gpio5";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	sd_cd: sd-cd-state {
+		pins = "gpio36";
+		function = "gpio";
+		bias-pull-up;
+	};
+};
+
+&uart10 {
+	compatible = "qcom,geni-debug-uart";
+	pinctrl-0 = <&qup_uart10_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 149 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l8a>;
+	vcc-max-microamp = <1100000>;
+	vccq-supply = <&vreg_l4c>;
+	vccq-max-microamp = <1200000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l4a>;
+	vdda-pll-supply = <&vreg_l1c>;
+
+	status = "okay";
+};
+
+&usb_0 {
+	dr_mode = "peripheral";
+
+	status = "okay";
+};
+
+&usb_0_hsphy {
+	vdda-pll-supply = <&vreg_l7a>;
+	vdda18-supply = <&vreg_l6c>;
+	vdda33-supply = <&vreg_l9a>;
+
+	status = "okay";
+};
+
+&usb_0_qmpphy {
+	vdda-phy-supply = <&vreg_l1c>;
+	vdda-pll-supply = <&vreg_l7a>;
+
+	status = "okay";
+};
+
+&xo_board_clk {
+	clock-frequency = <38400000>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi b/arch/arm64/boot/dts/qcom/lemans-pmics.dtsi
index 1369c3d43f86..1369c3d43f86 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans-pmics.dtsi
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi b/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi
index 63b3031cfcc1..c69aa2f41ce2 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans-ride-common.dtsi
@@ -3,18 +3,11 @@
  * Copyright (c) 2023, Linaro Limited
  */
 
-/dts-v1/;
-
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 
-#include "sa8775p.dtsi"
-#include "sa8775p-pmics.dtsi"
-
 / {
 	aliases {
-		ethernet0 = &ethernet0;
-		ethernet1 = &ethernet1;
 		i2c11 = &i2c11;
 		i2c18 = &i2c18;
 		serial0 = &uart10;
@@ -443,151 +436,6 @@
 	};
 };
 
-&ethernet0 {
-	phy-handle = <&sgmii_phy0>;
-
-	pinctrl-0 = <&ethernet0_default>;
-	pinctrl-names = "default";
-
-	snps,mtl-rx-config = <&mtl_rx_setup>;
-	snps,mtl-tx-config = <&mtl_tx_setup>;
-	snps,ps-speed = <1000>;
-
-	status = "okay";
-
-	mdio: mdio {
-		compatible = "snps,dwmac-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-	};
-
-	mtl_rx_setup: rx-queues-config {
-		snps,rx-queues-to-use = <4>;
-		snps,rx-sched-sp;
-
-		queue0 {
-			snps,dcb-algorithm;
-			snps,map-to-dma-channel = <0x0>;
-			snps,route-up;
-			snps,priority = <0x1>;
-		};
-
-		queue1 {
-			snps,dcb-algorithm;
-			snps,map-to-dma-channel = <0x1>;
-			snps,route-ptp;
-		};
-
-		queue2 {
-			snps,avb-algorithm;
-			snps,map-to-dma-channel = <0x2>;
-			snps,route-avcp;
-		};
-
-		queue3 {
-			snps,avb-algorithm;
-			snps,map-to-dma-channel = <0x3>;
-			snps,priority = <0xc>;
-		};
-	};
-
-	mtl_tx_setup: tx-queues-config {
-		snps,tx-queues-to-use = <4>;
-
-		queue0 {
-			snps,dcb-algorithm;
-		};
-
-		queue1 {
-			snps,dcb-algorithm;
-		};
-
-		queue2 {
-			snps,avb-algorithm;
-			snps,send_slope = <0x1000>;
-			snps,idle_slope = <0x1000>;
-			snps,high_credit = <0x3e800>;
-			snps,low_credit = <0xffc18000>;
-		};
-
-		queue3 {
-			snps,avb-algorithm;
-			snps,send_slope = <0x1000>;
-			snps,idle_slope = <0x1000>;
-			snps,high_credit = <0x3e800>;
-			snps,low_credit = <0xffc18000>;
-		};
-	};
-};
-
-&ethernet1 {
-	phy-handle = <&sgmii_phy1>;
-
-	snps,mtl-rx-config = <&mtl_rx_setup1>;
-	snps,mtl-tx-config = <&mtl_tx_setup1>;
-	snps,ps-speed = <1000>;
-
-	status = "okay";
-
-	mtl_rx_setup1: rx-queues-config {
-		snps,rx-queues-to-use = <4>;
-		snps,rx-sched-sp;
-
-		queue0 {
-			snps,dcb-algorithm;
-			snps,map-to-dma-channel = <0x0>;
-			snps,route-up;
-			snps,priority = <0x1>;
-		};
-
-		queue1 {
-			snps,dcb-algorithm;
-			snps,map-to-dma-channel = <0x1>;
-			snps,route-ptp;
-		};
-
-		queue2 {
-			snps,avb-algorithm;
-			snps,map-to-dma-channel = <0x2>;
-			snps,route-avcp;
-		};
-
-		queue3 {
-			snps,avb-algorithm;
-			snps,map-to-dma-channel = <0x3>;
-			snps,priority = <0xc>;
-		};
-	};
-
-	mtl_tx_setup1: tx-queues-config {
-		snps,tx-queues-to-use = <4>;
-
-		queue0 {
-			snps,dcb-algorithm;
-		};
-
-		queue1 {
-			snps,dcb-algorithm;
-		};
-
-		queue2 {
-			snps,avb-algorithm;
-			snps,send_slope = <0x1000>;
-			snps,idle_slope = <0x1000>;
-			snps,high_credit = <0x3e800>;
-			snps,low_credit = <0xffc18000>;
-		};
-
-		queue3 {
-			snps,avb-algorithm;
-			snps,send_slope = <0x1000>;
-			snps,idle_slope = <0x1000>;
-			snps,high_credit = <0x3e800>;
-			snps,low_credit = <0xffc18000>;
-		};
-	};
-};
-
 &i2c11 {
 	clock-frequency = <400000>;
 	status = "okay";
@@ -960,22 +808,6 @@
 		bias-disable;
 	};
 
-	ethernet0_default: ethernet0-default-state {
-		ethernet0_mdc: ethernet0-mdc-pins {
-			pins = "gpio8";
-			function = "emac0_mdc";
-			drive-strength = <16>;
-			bias-pull-up;
-		};
-
-		ethernet0_mdio: ethernet0-mdio-pins {
-			pins = "gpio9";
-			function = "emac0_mdio";
-			drive-strength = <16>;
-			bias-pull-up;
-		};
-	};
-
 	io_expander_intr_active: io-expander-intr-active-state {
 		pins = "gpio98";
 		function = "gpio";
@@ -1165,14 +997,11 @@
 &usb_0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb0_en_state>;
+	dr_mode = "peripheral";
 
 	status = "okay";
 };
 
-&usb_0_dwc3 {
-	dr_mode = "peripheral";
-};
-
 &usb_0_hsphy {
 	vdda-pll-supply = <&vreg_l7a>;
 	vdda18-supply = <&vreg_l6c>;
@@ -1191,14 +1020,11 @@
 &usb_1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb1_en_state>;
+	dr_mode = "host";
 
 	status = "okay";
 };
 
-&usb_1_dwc3 {
-	dr_mode = "host";
-};
-
 &usb_1_hsphy {
 	vdda-pll-supply = <&vreg_l7a>;
 	vdda18-supply = <&vreg_l6c>;
@@ -1217,14 +1043,11 @@
 &usb_2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&usb2_en_state>;
+	dr_mode = "host";
 
 	status = "okay";
 };
 
-&usb_2_dwc3 {
-	dr_mode = "host";
-};
-
 &usb_2_hsphy {
 	vdda-pll-supply = <&vreg_l7a>;
 	vdda18-supply = <&vreg_l6c>;
diff --git a/arch/arm64/boot/dts/qcom/lemans-ride-ethernet-88ea1512.dtsi b/arch/arm64/boot/dts/qcom/lemans-ride-ethernet-88ea1512.dtsi
new file mode 100644
index 000000000000..9d6bbe1447a4
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/lemans-ride-ethernet-88ea1512.dtsi
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/*
+ * Ethernet card for Lemans based Ride boards.
+ * It supports 2x 1G - SGMII (Marvell 88EA1512-B2) phy for Main domain
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	aliases {
+		ethernet0 = &ethernet0;
+		ethernet1 = &ethernet1;
+	};
+};
+
+&tlmm {
+	ethernet0_default: ethernet0-default-state {
+		ethernet0_mdc: ethernet0-mdc-pins {
+			pins = "gpio8";
+			function = "emac0_mdc";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		ethernet0_mdio: ethernet0-mdio-pins {
+			pins = "gpio9";
+			function = "emac0_mdio";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+	};
+};
+
+&ethernet0 {
+	phy-handle = <&sgmii_phy0>;
+	phy-mode = "sgmii";
+
+	pinctrl-0 = <&ethernet0_default>;
+	pinctrl-names = "default";
+
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+	snps,ps-speed = <1000>;
+
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		sgmii_phy0: phy@8 {
+			compatible = "ethernet-phy-id0141.0dd4";
+			reg = <0x8>;
+			device_type = "ethernet-phy";
+			interrupts-extended = <&tlmm 7 IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <11000>;
+			reset-deassert-us = <70000>;
+		};
+
+		sgmii_phy1: phy@a {
+			compatible = "ethernet-phy-id0141.0dd4";
+			reg = <0xa>;
+			device_type = "ethernet-phy";
+			interrupts-extended = <&tlmm 26 IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <11000>;
+			reset-deassert-us = <70000>;
+		};
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <4>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x0>;
+			snps,route-up;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x1>;
+			snps,route-ptp;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x2>;
+			snps,route-avcp;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x3>;
+			snps,priority = <0xc>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <4>;
+
+		queue0 {
+			snps,dcb-algorithm;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+	};
+};
+
+&ethernet1 {
+	phy-handle = <&sgmii_phy1>;
+	phy-mode = "sgmii";
+
+	snps,mtl-rx-config = <&mtl_rx_setup1>;
+	snps,mtl-tx-config = <&mtl_tx_setup1>;
+	snps,ps-speed = <1000>;
+
+	status = "okay";
+
+	mtl_rx_setup1: rx-queues-config {
+		snps,rx-queues-to-use = <4>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x0>;
+			snps,route-up;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x1>;
+			snps,route-ptp;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x2>;
+			snps,route-avcp;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x3>;
+			snps,priority = <0xc>;
+		};
+	};
+
+	mtl_tx_setup1: tx-queues-config {
+		snps,tx-queues-to-use = <4>;
+
+		queue0 {
+			snps,dcb-algorithm;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+	};
+};
+
diff --git a/arch/arm64/boot/dts/qcom/lemans-ride-ethernet-aqr115c.dtsi b/arch/arm64/boot/dts/qcom/lemans-ride-ethernet-aqr115c.dtsi
new file mode 100644
index 000000000000..2d2d9ee5f0d9
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/lemans-ride-ethernet-aqr115c.dtsi
@@ -0,0 +1,205 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023, Linaro Limited
+ */
+
+/*
+ * Ethernet card for Lemans based Ride r3 boards.
+ * It supports 2x 2.5G - HSGMII (Marvell hsgmii) phy for Main domain
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	aliases {
+		ethernet0 = &ethernet0;
+		ethernet1 = &ethernet1;
+	};
+};
+
+&tlmm {
+	ethernet0_default: ethernet0-default-state {
+		ethernet0_mdc: ethernet0-mdc-pins {
+			pins = "gpio8";
+			function = "emac0_mdc";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		ethernet0_mdio: ethernet0-mdio-pins {
+			pins = "gpio9";
+			function = "emac0_mdio";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+	};
+};
+
+&ethernet0 {
+	phy-handle = <&hsgmii_phy0>;
+	phy-mode = "2500base-x";
+
+	pinctrl-0 = <&ethernet0_default>;
+	pinctrl-names = "default";
+
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+	snps,ps-speed = <1000>;
+
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hsgmii_phy0: phy@8 {
+			compatible = "ethernet-phy-id31c3.1c33";
+			reg = <0x8>;
+			device_type = "ethernet-phy";
+			interrupts-extended = <&tlmm 7 IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <11000>;
+			reset-deassert-us = <70000>;
+		};
+
+		hsgmii_phy1: phy@0 {
+			compatible = "ethernet-phy-id31c3.1c33";
+			reg = <0x0>;
+			device_type = "ethernet-phy";
+			interrupts-extended = <&tlmm 26 IRQ_TYPE_EDGE_FALLING>;
+			reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <11000>;
+			reset-deassert-us = <70000>;
+		};
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <4>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x0>;
+			snps,route-up;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x1>;
+			snps,route-ptp;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x2>;
+			snps,route-avcp;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x3>;
+			snps,priority = <0xc>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <4>;
+
+		queue0 {
+			snps,dcb-algorithm;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+	};
+};
+
+&ethernet1 {
+	phy-handle = <&hsgmii_phy1>;
+	phy-mode = "2500base-x";
+
+	snps,mtl-rx-config = <&mtl_rx_setup1>;
+	snps,mtl-tx-config = <&mtl_tx_setup1>;
+	snps,ps-speed = <1000>;
+
+	status = "okay";
+
+	mtl_rx_setup1: rx-queues-config {
+		snps,rx-queues-to-use = <4>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x0>;
+			snps,route-up;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x1>;
+			snps,route-ptp;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x2>;
+			snps,route-avcp;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x3>;
+			snps,priority = <0xc>;
+		};
+	};
+
+	mtl_tx_setup1: tx-queues-config {
+		snps,tx-queues-to-use = <4>;
+
+		queue0 {
+			snps,dcb-algorithm;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+	};
+};
+
diff --git a/arch/arm64/boot/dts/qcom/sa8775p.dtsi b/arch/arm64/boot/dts/qcom/lemans.dtsi
index fed34717460f..cf685cb186ed 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p.dtsi
+++ b/arch/arm64/boot/dts/qcom/lemans.dtsi
@@ -12,13 +12,14 @@
 #include <dt-bindings/clock/qcom,sa8775p-gcc.h>
 #include <dt-bindings/clock/qcom,sa8775p-gpucc.h>
 #include <dt-bindings/clock/qcom,sa8775p-videocc.h>
+#include <dt-bindings/clock/qcom,sa8775p-camcc.h>
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
 #include <dt-bindings/firmware/qcom,scm.h>
-#include <dt-bindings/power/qcom,rpmhpd.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,gpr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 
 / {
@@ -514,7 +515,6 @@
 		scm {
 			compatible = "qcom,scm-sa8775p", "qcom,scm";
 			qcom,dload-mode = <&tcsr 0x13000>;
-			memory-region = <&tz_ffi_mem>;
 		};
 	};
 
@@ -773,6 +773,11 @@
 			no-map;
 		};
 
+		gunyah_md_mem: gunyah-md@91a80000 {
+			reg = <0x0 0x91a80000 0x0 0x80000>;
+			no-map;
+		};
+
 		aoss_backup_mem: aoss-backup@91b00000 {
 			reg = <0x0 0x91b00000 0x0 0x40000>;
 			no-map;
@@ -798,12 +803,6 @@
 			no-map;
 		};
 
-		tz_ffi_mem: tz-ffi@91c00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x0 0x91c00000 0x0 0x1400000>;
-			no-map;
-		};
-
 		lpass_machine_learning_mem: lpass-machine-learning@93b00000 {
 			reg = <0x0 0x93b00000 0x0 0xf00000>;
 			no-map;
@@ -815,62 +814,77 @@
 		};
 
 		pil_camera_mem: pil-camera@95200000 {
-			reg = <0x0 0x95200000 0x0 0x500000>;
+			reg = <0x0 0x95200000 0x0 0x700000>;
 			no-map;
 		};
 
-		pil_adsp_mem: pil-adsp@95c00000 {
-			reg = <0x0 0x95c00000 0x0 0x1e00000>;
+		pil_adsp_mem: pil-adsp@95900000 {
+			reg = <0x0 0x95900000 0x0 0x1e00000>;
 			no-map;
 		};
 
-		pil_gdsp0_mem: pil-gdsp0@97b00000 {
-			reg = <0x0 0x97b00000 0x0 0x1e00000>;
+		q6_adsp_dtb_mem: q6-adsp-dtb@97700000 {
+			reg = <0x0 0x97700000 0x0 0x80000>;
 			no-map;
 		};
 
-		pil_gdsp1_mem: pil-gdsp1@99900000 {
-			reg = <0x0 0x99900000 0x0 0x1e00000>;
+		q6_gdsp0_dtb_mem: q6-gdsp0-dtb@97780000 {
+			reg = <0x0 0x97780000 0x0 0x80000>;
 			no-map;
 		};
 
-		pil_cdsp0_mem: pil-cdsp0@9b800000 {
-			reg = <0x0 0x9b800000 0x0 0x1e00000>;
+		pil_gdsp0_mem: pil-gdsp0@97800000 {
+			reg = <0x0 0x97800000 0x0 0x1e00000>;
 			no-map;
 		};
 
-		pil_gpu_mem: pil-gpu@9d600000 {
-			reg = <0x0 0x9d600000 0x0 0x2000>;
+		pil_gdsp1_mem: pil-gdsp1@99600000 {
+			reg = <0x0 0x99600000 0x0 0x1e00000>;
 			no-map;
 		};
 
-		pil_cdsp1_mem: pil-cdsp1@9d700000 {
-			reg = <0x0 0x9d700000 0x0 0x1e00000>;
+		q6_gdsp1_dtb_mem: q6-gdsp1-dtb@9b400000 {
+			reg = <0x0 0x9b400000 0x0 0x80000>;
 			no-map;
 		};
 
-		pil_cvp_mem: pil-cvp@9f500000 {
-			reg = <0x0 0x9f500000 0x0 0x700000>;
+		q6_cdsp0_dtb_mem: q6-cdsp0-dtb@9b480000 {
+			reg = <0x0 0x9b480000 0x0 0x80000>;
 			no-map;
 		};
 
-		pil_video_mem: pil-video@9fc00000 {
-			reg = <0x0 0x9fc00000 0x0 0x700000>;
+		pil_cdsp0_mem: pil-cdsp0@9b500000 {
+			reg = <0x0 0x9b500000 0x0 0x1e00000>;
 			no-map;
 		};
 
-		audio_mdf_mem: audio-mdf-region@ae000000 {
-			reg = <0x0 0xae000000 0x0 0x1000000>;
+		pil_gpu_mem: pil-gpu@9d300000 {
+			reg = <0x0 0x9d300000 0x0 0x2000>;
 			no-map;
 		};
 
-		firmware_mem: firmware-region@b0000000 {
-			reg = <0x0 0xb0000000 0x0 0x800000>;
+		q6_cdsp1_dtb_mem: q6-cdsp1-dtb@9d380000 {
+			reg = <0x0 0x9d380000 0x0 0x80000>;
 			no-map;
 		};
 
-		hyptz_reserved_mem: hyptz-reserved@beb00000 {
-			reg = <0x0 0xbeb00000 0x0 0x11500000>;
+		pil_cdsp1_mem: pil-cdsp1@9d400000 {
+			reg = <0x0 0x9d400000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		pil_cvp_mem: pil-cvp@9f200000 {
+			reg = <0x0 0x9f200000 0x0 0x700000>;
+			no-map;
+		};
+
+		pil_video_mem: pil-video@9f900000 {
+			reg = <0x0 0x9f900000 0x0 0x1000000>;
+			no-map;
+		};
+
+		firmware_mem: firmware-region@b0000000 {
+			reg = <0x0 0xb0000000 0x0 0x800000>;
 			no-map;
 		};
 
@@ -915,7 +929,7 @@
 		};
 
 		trusted_apps_mem: trusted-apps@d1900000 {
-			reg = <0x0 0xd1900000 0x0 0x3800000>;
+			reg = <0x0 0xd1900000 0x0 0x1c00000>;
 			no-map;
 		};
 
@@ -3822,6 +3836,58 @@
 			};
 		};
 
+		sdhc: mmc@87c4000 {
+			compatible = "qcom,sa8775p-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0 0x087c4000 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 521 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq",
+					  "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>;
+			clock-names = "iface",
+				      "core";
+
+			interconnects = <&aggre1_noc MASTER_SDC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_SDC1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
+
+			iommus = <&apps_smmu 0x0 0x0>;
+			dma-coherent;
+
+			operating-points-v2 = <&sdhc_opp_table>;
+			power-domains = <&rpmhpd SA8775P_CX>;
+			resets = <&gcc GCC_SDCC1_BCR>;
+
+			qcom,dll-config = <0x0007642c>;
+			qcom,ddr-config = <0x80040868>;
+
+			status = "disabled";
+
+			sdhc_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <1800000 400000>;
+					opp-avg-kBps = <100000 0>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <5400000 1600000>;
+					opp-avg-kBps = <390000 0>;
+				};
+			};
+		};
+
 		usb_0_hsphy: phy@88e4000 {
 			compatible = "qcom,sa8775p-usb-hs-phy",
 				     "qcom,usb-snps-hs-5nm-phy";
@@ -3859,12 +3925,9 @@
 			status = "disabled";
 		};
 
-		usb_0: usb@a6f8800 {
-			compatible = "qcom,sa8775p-dwc3", "qcom,dwc3";
-			reg = <0 0x0a6f8800 0 0x400>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+		usb_0: usb@a600000 {
+			compatible = "qcom,sa8775p-dwc3", "qcom,snps-dwc3";
+			reg = <0 0x0a600000 0 0xfc100>;
 
 			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
 				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
@@ -3877,12 +3940,14 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
 					      <&intc GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 12 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "pwr_event",
+			interrupt-names = "dwc_usb3",
+					  "pwr_event",
 					  "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
@@ -3899,18 +3964,13 @@
 
 			wakeup-source;
 
-			status = "disabled";
+			iommus = <&apps_smmu 0x080 0x0>;
+			phys = <&usb_0_hsphy>, <&usb_0_qmpphy>;
+			phy-names = "usb2-phy", "usb3-phy";
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
 
-			usb_0_dwc3: usb@a600000 {
-				compatible = "snps,dwc3";
-				reg = <0 0x0a600000 0 0xe000>;
-				interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
-				iommus = <&apps_smmu 0x080 0x0>;
-				phys = <&usb_0_hsphy>, <&usb_0_qmpphy>;
-				phy-names = "usb2-phy", "usb3-phy";
-				snps,dis-u1-entry-quirk;
-				snps,dis-u2-entry-quirk;
-			};
+			status = "disabled";
 		};
 
 		usb_1_hsphy: phy@88e6000 {
@@ -3950,12 +4010,9 @@
 			status = "disabled";
 		};
 
-		usb_1: usb@a8f8800 {
-			compatible = "qcom,sa8775p-dwc3", "qcom,dwc3";
-			reg = <0 0x0a8f8800 0 0x400>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+		usb_1: usb@a800000 {
+			compatible = "qcom,sa8775p-dwc3", "qcom,snps-dwc3";
+			reg = <0 0x0a800000 0 0xfc100>;
 
 			clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
 				 <&gcc GCC_USB30_SEC_MASTER_CLK>,
@@ -3968,12 +4025,14 @@
 					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 352 IRQ_TYPE_LEVEL_HIGH>,
 					      <&intc GIC_SPI 351 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 8 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 7 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 13 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "pwr_event",
+			interrupt-names = "dwc_usb3",
+					  "pwr_event",
 					  "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
@@ -3990,18 +4049,13 @@
 
 			wakeup-source;
 
-			status = "disabled";
+			iommus = <&apps_smmu 0x0a0 0x0>;
+			phys = <&usb_1_hsphy>, <&usb_1_qmpphy>;
+			phy-names = "usb2-phy", "usb3-phy";
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
 
-			usb_1_dwc3: usb@a800000 {
-				compatible = "snps,dwc3";
-				reg = <0 0x0a800000 0 0xe000>;
-				interrupts = <GIC_SPI 349 IRQ_TYPE_LEVEL_HIGH>;
-				iommus = <&apps_smmu 0x0a0 0x0>;
-				phys = <&usb_1_hsphy>, <&usb_1_qmpphy>;
-				phy-names = "usb2-phy", "usb3-phy";
-				snps,dis-u1-entry-quirk;
-				snps,dis-u2-entry-quirk;
-			};
+			status = "disabled";
 		};
 
 		usb_2_hsphy: phy@88e7000 {
@@ -4017,12 +4071,9 @@
 			status = "disabled";
 		};
 
-		usb_2: usb@a4f8800 {
-			compatible = "qcom,sa8775p-dwc3", "qcom,dwc3";
-			reg = <0 0x0a4f8800 0 0x400>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+		usb_2: usb@a400000 {
+			compatible = "qcom,sa8775p-dwc3", "qcom,snps-dwc3";
+			reg = <0 0x0a400000 0 0xfc100>;
 
 			clocks = <&gcc GCC_CFG_NOC_USB2_PRIM_AXI_CLK>,
 				 <&gcc GCC_USB20_MASTER_CLK>,
@@ -4035,11 +4086,13 @@
 					  <&gcc GCC_USB20_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
 					      <&intc GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "pwr_event",
+			interrupt-names = "dwc_usb3",
+					  "pwr_event",
 					  "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq";
@@ -4055,18 +4108,13 @@
 
 			wakeup-source;
 
-			status = "disabled";
+			iommus = <&apps_smmu 0x020 0x0>;
+			phys = <&usb_2_hsphy>;
+			phy-names = "usb2-phy";
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
 
-			usb_2_dwc3: usb@a400000 {
-				compatible = "snps,dwc3";
-				reg = <0 0x0a400000 0 0xe000>;
-				interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>;
-				iommus = <&apps_smmu 0x020 0x0>;
-				phys = <&usb_2_hsphy>;
-				phy-names = "usb2-phy";
-				snps,dis-u1-entry-quirk;
-				snps,dis-u2-entry-quirk;
-			};
+			status = "disabled";
 		};
 
 		tcsr_mutex: hwlock@1f40000 {
@@ -4345,6 +4393,346 @@
 			#power-domain-cells = <1>;
 		};
 
+		cci0: cci@ac13000 {
+			compatible = "qcom,sa8775p-cci", "qcom,msm8996-cci";
+			reg = <0x0 0x0ac13000 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 460 IRQ_TYPE_EDGE_RISING>;
+
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_0_CLK>;
+			clock-names = "camnoc_axi",
+				      "cpas_ahb",
+				      "cci";
+
+			pinctrl-0 = <&cci0_0_default &cci0_1_default>;
+			pinctrl-1 = <&cci0_0_sleep &cci0_1_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci0_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci0_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci1: cci@ac14000 {
+			compatible = "qcom,sa8775p-cci", "qcom,msm8996-cci";
+			reg = <0x0 0x0ac14000 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 271 IRQ_TYPE_EDGE_RISING>;
+
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_1_CLK>;
+			clock-names = "camnoc_axi",
+				      "cpas_ahb",
+				      "cci";
+
+			pinctrl-0 = <&cci1_0_default &cci1_1_default>;
+			pinctrl-1 = <&cci1_0_sleep &cci1_1_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci1_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci1_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci2: cci@ac15000 {
+			compatible = "qcom,sa8775p-cci", "qcom,msm8996-cci";
+			reg = <0x0 0x0ac15000 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 651 IRQ_TYPE_EDGE_RISING>;
+
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_2_CLK>;
+			clock-names = "camnoc_axi",
+				      "cpas_ahb",
+				      "cci";
+
+			pinctrl-0 = <&cci2_0_default &cci2_1_default>;
+			pinctrl-1 = <&cci2_0_sleep &cci2_1_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci2_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci2_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci3: cci@ac16000 {
+			compatible = "qcom,sa8775p-cci", "qcom,msm8996-cci";
+			reg = <0x0 0x0ac16000 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 771 IRQ_TYPE_EDGE_RISING>;
+
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_3_CLK>;
+			clock-names = "camnoc_axi",
+				      "cpas_ahb",
+				      "cci";
+
+			pinctrl-0 = <&cci3_0_default &cci3_1_default>;
+			pinctrl-1 = <&cci3_0_sleep &cci3_1_sleep>;
+			pinctrl-names = "default", "sleep";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci3_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci3_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		camss: isp@ac78000 {
+			compatible = "qcom,sa8775p-camss";
+
+			reg = <0x0 0xac78000 0x0 0x1000>,
+			      <0x0 0xac7a000 0x0 0x0f00>,
+			      <0x0 0xac7c000 0x0 0x0f00>,
+			      <0x0 0xac84000 0x0 0x0f00>,
+			      <0x0 0xac88000 0x0 0x0f00>,
+			      <0x0 0xac8c000 0x0 0x0f00>,
+			      <0x0 0xac90000 0x0 0x0f00>,
+			      <0x0 0xac94000 0x0 0x0f00>,
+			      <0x0 0xac9c000 0x0 0x2000>,
+			      <0x0 0xac9e000 0x0 0x2000>,
+			      <0x0 0xaca0000 0x0 0x2000>,
+			      <0x0 0xaca2000 0x0 0x2000>,
+			      <0x0 0xacac000 0x0 0x0400>,
+			      <0x0 0xacad000 0x0 0x0400>,
+			      <0x0 0xacae000 0x0 0x0400>,
+			      <0x0 0xac4d000 0x0 0xd000>,
+			      <0x0 0xac5a000 0x0 0xd000>,
+			      <0x0 0xac85000 0x0 0x0d00>,
+			      <0x0 0xac89000 0x0 0x0d00>,
+			      <0x0 0xac8d000 0x0 0x0d00>,
+			      <0x0 0xac91000 0x0 0x0d00>,
+			      <0x0 0xac95000 0x0 0x0d00>;
+			reg-names = "csid_wrapper",
+				    "csid0",
+				    "csid1",
+				    "csid_lite0",
+				    "csid_lite1",
+				    "csid_lite2",
+				    "csid_lite3",
+				    "csid_lite4",
+				    "csiphy0",
+				    "csiphy1",
+				    "csiphy2",
+				    "csiphy3",
+				    "tpg0",
+				    "tpg1",
+				    "tpg2",
+				    "vfe0",
+				    "vfe1",
+				    "vfe_lite0",
+				    "vfe_lite1",
+				    "vfe_lite2",
+				    "vfe_lite3",
+				    "vfe_lite4";
+
+			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
+				 <&camcc CAM_CC_CORE_AHB_CLK>,
+				 <&camcc CAM_CC_CPAS_AHB_CLK>,
+				 <&camcc CAM_CC_CPAS_FAST_AHB_CLK>,
+				 <&camcc CAM_CC_CPAS_IFE_LITE_CLK>,
+				 <&camcc CAM_CC_CPAS_IFE_0_CLK>,
+				 <&camcc CAM_CC_CPAS_IFE_1_CLK>,
+				 <&camcc CAM_CC_CSID_CLK>,
+				 <&camcc CAM_CC_CSIPHY0_CLK>,
+				 <&camcc CAM_CC_CSI0PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY1_CLK>,
+				 <&camcc CAM_CC_CSI1PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY2_CLK>,
+				 <&camcc CAM_CC_CSI2PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSIPHY3_CLK>,
+				 <&camcc CAM_CC_CSI3PHYTIMER_CLK>,
+				 <&camcc CAM_CC_CSID_CSIPHY_RX_CLK>,
+				 <&gcc GCC_CAMERA_HF_AXI_CLK>,
+				 <&gcc GCC_CAMERA_SF_AXI_CLK>,
+				 <&camcc CAM_CC_ICP_AHB_CLK>,
+				 <&camcc CAM_CC_IFE_0_CLK>,
+				 <&camcc CAM_CC_IFE_0_FAST_AHB_CLK>,
+				 <&camcc CAM_CC_IFE_1_CLK>,
+				 <&camcc CAM_CC_IFE_1_FAST_AHB_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_AHB_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_CPHY_RX_CLK>,
+				 <&camcc CAM_CC_IFE_LITE_CSID_CLK>;
+			clock-names = "camnoc_axi",
+				      "core_ahb",
+				      "cpas_ahb",
+				      "cpas_fast_ahb_clk",
+				      "cpas_vfe_lite",
+				      "cpas_vfe0",
+				      "cpas_vfe1",
+				      "csid",
+				      "csiphy0",
+				      "csiphy0_timer",
+				      "csiphy1",
+				      "csiphy1_timer",
+				      "csiphy2",
+				      "csiphy2_timer",
+				      "csiphy3",
+				      "csiphy3_timer",
+				      "csiphy_rx",
+				      "gcc_axi_hf",
+				      "gcc_axi_sf",
+				      "icp_ahb",
+				      "vfe0",
+				      "vfe0_fast_ahb",
+				      "vfe1",
+				      "vfe1_fast_ahb",
+				      "vfe_lite",
+				      "vfe_lite_ahb",
+				      "vfe_lite_cphy_rx",
+				      "vfe_lite_csid";
+
+			interrupts = <GIC_SPI 565 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 564 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 468 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 359 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 759 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 758 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 604 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 545 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 546 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 547 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 360 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 761 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 760 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 605 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "csid0",
+					  "csid1",
+					  "csid_lite0",
+					  "csid_lite1",
+					  "csid_lite2",
+					  "csid_lite3",
+					  "csid_lite4",
+					  "csiphy0",
+					  "csiphy1",
+					  "csiphy2",
+					  "csiphy3",
+					  "tpg0",
+					  "tpg1",
+					  "tpg2",
+					  "vfe0",
+					  "vfe1",
+					  "vfe_lite0",
+					  "vfe_lite1",
+					  "vfe_lite2",
+					  "vfe_lite3",
+					  "vfe_lite4";
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_CAMERA_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mmss_noc MASTER_CAMNOC_HF QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "ahb",
+					     "hf_0";
+
+			iommus = <&apps_smmu 0x3400 0x20>;
+
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+			power-domain-names = "top";
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+				};
+
+				port@1 {
+					reg = <1>;
+				};
+
+				port@2 {
+					reg = <2>;
+				};
+
+				port@3 {
+					reg = <3>;
+				};
+			};
+		};
+
 		camcc: clock-controller@ade0000 {
 			compatible = "qcom,sa8775p-camcc";
 			reg = <0x0 0x0ade0000 0x0 0x20000>;
@@ -4405,7 +4793,7 @@
 					 <&dispcc0 MDSS_DISP_CC_MDSS_MDP_LUT_CLK>,
 					 <&dispcc0 MDSS_DISP_CC_MDSS_MDP_CLK>,
 					 <&dispcc0 MDSS_DISP_CC_MDSS_VSYNC_CLK>;
-				clock-names = "bus",
+				clock-names = "nrt_bus",
 					      "iface",
 					      "lut",
 					      "core",
@@ -4682,7 +5070,11 @@
 				      <0x0 0x0af54200 0x0 0x0c0>,
 				      <0x0 0x0af55000 0x0 0x770>,
 				      <0x0 0x0af56000 0x0 0x09c>,
-				      <0x0 0x0af57000 0x0 0x09c>;
+				      <0x0 0x0af57000 0x0 0x09c>,
+				      <0x0 0x0af58000 0x0 0x09c>,
+				      <0x0 0x0af59000 0x0 0x09c>,
+				      <0x0 0x0af5a000 0x0 0x23c>,
+				      <0x0 0x0af5b000 0x0 0x23c>;
 
 				interrupt-parent = <&mdss0>;
 				interrupts = <12>;
@@ -4691,15 +5083,28 @@
 					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_AUX_CLK>,
 					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK>,
 					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
-					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL1_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL2_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL3_CLK>;
 				clock-names = "core_iface",
 					      "core_aux",
 					      "ctrl_link",
 					      "ctrl_link_iface",
-					      "stream_pixel";
+					      "stream_pixel",
+					      "stream_1_pixel",
+					      "stream_2_pixel",
+					      "stream_3_pixel";
 				assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
-						  <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
-				assigned-clock-parents = <&mdss0_dp0_phy 0>, <&mdss0_dp0_phy 1>;
+						  <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
+						  <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>,
+						  <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL2_CLK_SRC>,
+						  <&dispcc0 MDSS_DISP_CC_MDSS_DPTX0_PIXEL3_CLK_SRC>;
+				assigned-clock-parents = <&mdss0_dp0_phy 0>,
+							 <&mdss0_dp0_phy 1>,
+							 <&mdss0_dp0_phy 1>,
+							 <&mdss0_dp0_phy 1>,
+							 <&mdss0_dp0_phy 1>;
 				phys = <&mdss0_dp0_phy>;
 				phy-names = "dp";
 
@@ -4761,7 +5166,11 @@
 				      <0x0 0x0af5c200 0x0 0x0c0>,
 				      <0x0 0x0af5d000 0x0 0x770>,
 				      <0x0 0x0af5e000 0x0 0x09c>,
-				      <0x0 0x0af5f000 0x0 0x09c>;
+				      <0x0 0x0af5f000 0x0 0x09c>,
+				      <0x0 0x0af60000 0x0 0x09c>,
+				      <0x0 0x0af61000 0x0 0x09c>,
+				      <0x0 0x0af62000 0x0 0x23c>,
+				      <0x0 0x0af63000 0x0 0x23c>;
 
 				interrupt-parent = <&mdss0>;
 				interrupts = <13>;
@@ -4770,15 +5179,20 @@
 					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_AUX_CLK>,
 					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_LINK_CLK>,
 					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>,
-					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_PIXEL0_CLK>;
+					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_PIXEL0_CLK>,
+					 <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_PIXEL1_CLK>;
 				clock-names = "core_iface",
 					      "core_aux",
 					      "ctrl_link",
 					      "ctrl_link_iface",
-					      "stream_pixel";
+					      "stream_pixel",
+					      "stream_1_pixel";
 				assigned-clocks = <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>,
-						  <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>;
-				assigned-clock-parents = <&mdss0_dp1_phy 0>, <&mdss0_dp1_phy 1>;
+						  <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>,
+						  <&dispcc0 MDSS_DISP_CC_MDSS_DPTX1_PIXEL1_CLK_SRC>;
+				assigned-clock-parents = <&mdss0_dp1_phy 0>,
+							 <&mdss0_dp1_phy 1>,
+							 <&mdss0_dp1_phy 1>;
 				phys = <&mdss0_dp1_phy>;
 				phy-names = "dp";
 
@@ -4992,6 +5406,144 @@
 			gpio-ranges = <&tlmm 0 0 149>;
 			wakeup-parent = <&pdc>;
 
+			dp0_hot_plug_det: dp0-hot-plug-det-state {
+				pins = "gpio101";
+				function = "edp0_hot";
+				bias-disable;
+			};
+
+			dp1_hot_plug_det: dp1-hot-plug-det-state {
+				pins = "gpio102";
+				function = "edp1_hot";
+				bias-disable;
+			};
+
+			hs0_mi2s_active: hs0-mi2s-active-state {
+				pins = "gpio114", "gpio115", "gpio116", "gpio117";
+				function = "hs0_mi2s";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			hs2_mi2s_active: hs2-mi2s-active-state {
+				pins = "gpio122", "gpio123", "gpio124", "gpio125";
+				function = "hs2_mi2s";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			cci0_0_default: cci0-0-default-state {
+				pins = "gpio60", "gpio61";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			cci0_0_sleep: cci0-0-sleep-state {
+				pins = "gpio60", "gpio61";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci0_1_default: cci0-1-default-state {
+				pins = "gpio52", "gpio53";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			cci0_1_sleep: cci0-1-sleep-state {
+				pins = "gpio52", "gpio53";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci1_0_default: cci1-0-default-state {
+				pins = "gpio62", "gpio63";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			cci1_0_sleep: cci1-0-sleep-state {
+				pins = "gpio62", "gpio63";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci1_1_default: cci1-1-default-state {
+				pins = "gpio54", "gpio55";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			cci1_1_sleep: cci1-1-sleep-state {
+				pins = "gpio54", "gpio55";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci2_0_default: cci2-0-default-state {
+				pins = "gpio64", "gpio65";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			cci2_0_sleep: cci2-0-sleep-state {
+				pins = "gpio64", "gpio65";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci2_1_default: cci2-1-default-state {
+				pins = "gpio56", "gpio57";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			cci2_1_sleep: cci2-1-sleep-state {
+				pins = "gpio56", "gpio57";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci3_0_default: cci3-0-default-state {
+				pins = "gpio66", "gpio67";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			cci3_0_sleep: cci3-0-sleep-state {
+				pins = "gpio66", "gpio67";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
+			cci3_1_default: cci3-1-default-state {
+				pins = "gpio58", "gpio59";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-up = <2200>;
+			};
+
+			cci3_1_sleep: cci3-1-sleep-state {
+				pins = "gpio58", "gpio59";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-pull-down;
+			};
+
 			qup_i2c0_default: qup-i2c0-state {
 				pins = "gpio20", "gpio21";
 				function = "qup0_se0";
@@ -5619,6 +6171,46 @@
 					function = "qup3_se0";
 				};
 			};
+
+			sdc_default: sdc-default-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+			};
+
+			sdc_sleep: sdc-sleep-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+			};
 		};
 
 		sram: sram@146d8000 {
@@ -5854,6 +6446,7 @@
 			reg = <0x0 0x17a00000 0x0 0x10000>,     /* GICD */
 			      <0x0 0x17a60000 0x0 0x100000>;    /* GICR * 8 */
 			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 			#redistributor-regions = <1>;
@@ -6055,8 +6648,8 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&rpmhpd RPMHPD_CX>,
-					<&rpmhpd RPMHPD_MXC>;
+			power-domains = <&rpmhpd SA8775P_CX>,
+					<&rpmhpd SA8775P_MXC>;
 			power-domain-names = "cx", "mxc";
 
 			interconnects = <&gpdsp_anoc MASTER_DSP0 0
@@ -6080,6 +6673,35 @@
 
 				label = "gpdsp0";
 				qcom,remote-pid = <17>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "gdsp0";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x38a1 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x38a2 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x38a3 0x0>;
+						dma-coherent;
+					};
+				};
 			};
 		};
 
@@ -6098,8 +6720,8 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&rpmhpd RPMHPD_CX>,
-					<&rpmhpd RPMHPD_MXC>;
+			power-domains = <&rpmhpd SA8775P_CX>,
+					<&rpmhpd SA8775P_MXC>;
 			power-domain-names = "cx", "mxc";
 
 			interconnects = <&gpdsp_anoc MASTER_DSP1 0
@@ -6123,6 +6745,35 @@
 
 				label = "gpdsp1";
 				qcom,remote-pid = <18>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "gdsp1";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x38c1 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x38c2 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x38c3 0x0>;
+						dma-coherent;
+					};
+				};
 			};
 		};
 
@@ -6239,9 +6890,9 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&rpmhpd RPMHPD_CX>,
-					<&rpmhpd RPMHPD_MXC>,
-					<&rpmhpd RPMHPD_NSP0>;
+			power-domains = <&rpmhpd SA8775P_CX>,
+					<&rpmhpd SA8775P_MXC>,
+					<&rpmhpd SA8775P_NSP0>;
 			power-domain-names = "cx", "mxc", "nsp";
 
 			interconnects = <&nspa_noc MASTER_CDSP_PROC 0
@@ -6371,9 +7022,9 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&rpmhpd RPMHPD_CX>,
-					<&rpmhpd RPMHPD_MXC>,
-					<&rpmhpd RPMHPD_NSP1>;
+			power-domains = <&rpmhpd SA8775P_CX>,
+					<&rpmhpd SA8775P_MXC>,
+					<&rpmhpd SA8775P_NSP1>;
 			power-domain-names = "cx", "mxc", "nsp";
 
 			interconnects = <&nspb_noc MASTER_CDSP_PROC_B 0
@@ -6527,8 +7178,8 @@
 			clocks = <&rpmhcc RPMH_CXO_CLK>;
 			clock-names = "xo";
 
-			power-domains = <&rpmhpd RPMHPD_LCX>,
-					<&rpmhpd RPMHPD_LMX>;
+			power-domains = <&rpmhpd SA8775P_LCX>,
+					<&rpmhpd SA8775P_LMX>;
 			power-domain-names = "lcx", "lmx";
 
 			interconnects = <&lpass_ag_noc MASTER_LPASS_PROC 0 &mc_virt SLAVE_EBI1 0>;
@@ -6584,6 +7235,45 @@
 						dma-coherent;
 					};
 				};
+
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x3001 0x0>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
 			};
 		};
 	};
@@ -7635,13 +8325,19 @@
 		iommu-map = <0x0 &pcie_smmu 0x0000 0x1>,
 			    <0x100 &pcie_smmu 0x0001 0x1>;
 
-		resets = <&gcc GCC_PCIE_0_BCR>;
-		reset-names = "pci";
+		resets = <&gcc GCC_PCIE_0_BCR>,
+			 <&gcc GCC_PCIE_0_LINK_DOWN_BCR>;
+		reset-names = "pci",
+			      "link_down";
+
 		power-domains = <&gcc PCIE_0_GDSC>;
 
 		phys = <&pcie0_phy>;
 		phy-names = "pciephy";
 
+		eq-presets-8gts = /bits/ 16 <0x5555 0x5555>;
+		eq-presets-16gts = /bits/ 8 <0x55 0x55>;
+
 		status = "disabled";
 
 		pcieport0: pcie@0 {
@@ -7696,7 +8392,6 @@
 		power-domains = <&gcc PCIE_0_GDSC>;
 		phys = <&pcie0_phy>;
 		phy-names = "pciephy";
-		max-link-speed = <3>; /* FIXME: Limiting the Gen speed due to stability issues */
 		num-lanes = <2>;
 		linux,pci-domain = <0>;
 
@@ -7707,16 +8402,18 @@
 		compatible = "qcom,sa8775p-qmp-gen4x2-pcie-phy";
 		reg = <0x0 0x1c04000 0x0 0x2000>;
 
-		clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+		clocks = <&gcc GCC_PCIE_0_PHY_AUX_CLK>,
 			 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
 			 <&gcc GCC_PCIE_CLKREF_EN>,
 			 <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
 			 <&gcc GCC_PCIE_0_PIPE_CLK>,
-			 <&gcc GCC_PCIE_0_PIPEDIV2_CLK>,
-			 <&gcc GCC_PCIE_0_PHY_AUX_CLK>;
-
-		clock-names = "aux", "cfg_ahb", "ref", "rchng", "pipe",
-			      "pipediv2", "phy_aux";
+			 <&gcc GCC_PCIE_0_PIPEDIV2_CLK>;
+		clock-names = "aux",
+			      "cfg_ahb",
+			      "ref",
+			      "rchng",
+			      "pipe",
+			      "pipediv2";
 
 		assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
 		assigned-clock-rates = <100000000>;
@@ -7801,13 +8498,19 @@
 		iommu-map = <0x0 &pcie_smmu 0x0080 0x1>,
 			    <0x100 &pcie_smmu 0x0081 0x1>;
 
-		resets = <&gcc GCC_PCIE_1_BCR>;
-		reset-names = "pci";
+		resets = <&gcc GCC_PCIE_1_BCR>,
+			 <&gcc GCC_PCIE_1_LINK_DOWN_BCR>;
+		reset-names = "pci",
+			      "link_down";
+
 		power-domains = <&gcc PCIE_1_GDSC>;
 
 		phys = <&pcie1_phy>;
 		phy-names = "pciephy";
 
+		eq-presets-8gts = /bits/ 16 <0x5555 0x5555 0x5555 0x5555>;
+		eq-presets-16gts = /bits/ 8 <0x55 0x55 0x55 0x55>;
+
 		status = "disabled";
 
 		pcie@0 {
@@ -7862,7 +8565,6 @@
 		power-domains = <&gcc PCIE_1_GDSC>;
 		phys = <&pcie1_phy>;
 		phy-names = "pciephy";
-		max-link-speed = <3>; /* FIXME: Limiting the Gen speed due to stability issues */
 		num-lanes = <4>;
 		linux,pci-domain = <1>;
 
@@ -7873,16 +8575,18 @@
 		compatible = "qcom,sa8775p-qmp-gen4x4-pcie-phy";
 		reg = <0x0 0x1c14000 0x0 0x4000>;
 
-		clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
+		clocks = <&gcc GCC_PCIE_1_PHY_AUX_CLK>,
 			 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
 			 <&gcc GCC_PCIE_CLKREF_EN>,
 			 <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>,
 			 <&gcc GCC_PCIE_1_PIPE_CLK>,
-			 <&gcc GCC_PCIE_1_PIPEDIV2_CLK>,
-			 <&gcc GCC_PCIE_1_PHY_AUX_CLK>;
-
-		clock-names = "aux", "cfg_ahb", "ref", "rchng", "pipe",
-			      "pipediv2", "phy_aux";
+			 <&gcc GCC_PCIE_1_PIPEDIV2_CLK>;
+		clock-names = "aux",
+			      "cfg_ahb",
+			      "ref",
+			      "rchng",
+			      "pipe",
+			      "pipediv2";
 
 		assigned-clocks = <&gcc GCC_PCIE_1_PHY_RCHNG_CLK>;
 		assigned-clock-rates = <100000000>;
diff --git a/arch/arm64/boot/dts/qcom/monaco-evk.dts b/arch/arm64/boot/dts/qcom/monaco-evk.dts
new file mode 100644
index 000000000000..e72cf6725a52
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/monaco-evk.dts
@@ -0,0 +1,507 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "qcs8300.dtsi"
+#include "qcs8300-pmics.dtsi"
+
+/ {
+	model = "Qualcomm Technologies, Inc. Monaco EVK";
+	compatible = "qcom,monaco-evk", "qcom,qcs8300";
+
+	aliases {
+		ethernet0 = &ethernet0;
+		i2c1 = &i2c1;
+		serial0 = &uart7;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	dmic: audio-codec-0 {
+		compatible = "dmic-codec";
+		#sound-dai-cells = <0>;
+		num-channels = <1>;
+	};
+
+	max98357a: audio-codec-1 {
+		compatible = "maxim,max98357a";
+		#sound-dai-cells = <0>;
+	};
+
+	sound {
+		compatible = "qcom,qcs8275-sndcard";
+		model = "MONACO-EVK";
+
+		pinctrl-0 = <&hs0_mi2s_active>, <&mi2s1_active>;
+		pinctrl-names = "default";
+
+		hs0-mi2s-playback-dai-link {
+			link-name = "HS0 MI2S Playback";
+
+			codec {
+				sound-dai = <&max98357a>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai PRIMARY_MI2S_RX>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		sec-mi2s-capture-dai-link {
+			link-name = "Secondary MI2S Capture";
+
+			codec {
+				sound-dai = <&dmic>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai SECONDARY_MI2S_TX>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vreg_l3a: ldo3 {
+			regulator-name = "vreg_l3a";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4a: ldo4 {
+			regulator-name = "vreg_l4a";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a: ldo5 {
+			regulator-name = "vreg_l5a";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a: ldo6 {
+			regulator-name = "vreg_l6a";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7a: ldo7 {
+			regulator-name = "vreg_l7a";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8a: ldo8 {
+			regulator-name = "vreg_l8a";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a: ldo9 {
+			regulator-name = "vreg_l9a";
+			regulator-min-microvolt = <2970000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pmm8654au-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vreg_s5c: smps5 {
+			regulator-name = "vreg_s5c";
+			regulator-min-microvolt = <1104000>;
+			regulator-max-microvolt = <1104000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c: ldo1 {
+			regulator-name = "vreg_l1c";
+			regulator-min-microvolt = <300000>;
+			regulator-max-microvolt = <512000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c: ldo2 {
+			regulator-name = "vreg_l2c";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <904000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c: ldo4 {
+			regulator-name = "vreg_l4c";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c: ldo7 {
+			regulator-name = "vreg_l7c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c: ldo8 {
+			regulator-name = "vreg_l8c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c: ldo9 {
+			regulator-name = "vreg_l9c";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&ethernet0 {
+	phy-mode = "2500base-x";
+	phy-handle = <&hsgmii_phy0>;
+
+	pinctrl-0 = <&ethernet0_default>;
+	pinctrl-names = "default";
+
+	snps,mtl-rx-config = <&mtl_rx_setup>;
+	snps,mtl-tx-config = <&mtl_tx_setup>;
+	nvmem-cells = <&mac_addr0>;
+	nvmem-cell-names = "mac-address";
+
+	status = "okay";
+
+	mdio {
+		compatible = "snps,dwmac-mdio";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		hsgmii_phy0: ethernet-phy@1c {
+			compatible = "ethernet-phy-id004d.d101";
+			reg = <0x1c>;
+			reset-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <11000>;
+			reset-deassert-us = <70000>;
+		};
+	};
+
+	mtl_rx_setup: rx-queues-config {
+		snps,rx-queues-to-use = <4>;
+		snps,rx-sched-sp;
+
+		queue0 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x0>;
+			snps,route-up;
+			snps,priority = <0x1>;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+			snps,map-to-dma-channel = <0x1>;
+			snps,route-ptp;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x2>;
+			snps,route-avcp;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,map-to-dma-channel = <0x3>;
+			snps,priority = <0xc>;
+		};
+	};
+
+	mtl_tx_setup: tx-queues-config {
+		snps,tx-queues-to-use = <4>;
+
+		queue0 {
+			snps,dcb-algorithm;
+		};
+
+		queue1 {
+			snps,dcb-algorithm;
+		};
+
+		queue2 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+
+		queue3 {
+			snps,avb-algorithm;
+			snps,send_slope = <0x1000>;
+			snps,idle_slope = <0x1000>;
+			snps,high_credit = <0x3e800>;
+			snps,low_credit = <0xffc18000>;
+		};
+	};
+};
+
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/qcs8300/a623_zap.mbn";
+};
+
+&i2c1 {
+	pinctrl-0 = <&qup_i2c1_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	eeprom0: eeprom@50 {
+		compatible = "atmel,24c256";
+		reg = <0x50>;
+		pagesize = <64>;
+
+		nvmem-layout {
+			compatible = "fixed-layout";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			mac_addr0: mac-addr@0 {
+				reg = <0x0 0x6>;
+			};
+		};
+	};
+};
+
+&i2c15 {
+	pinctrl-0 = <&qup_i2c15_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	expander0: gpio@38 {
+		compatible = "ti,tca9538";
+		reg = <0x38>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	expander1: gpio@39 {
+		compatible = "ti,tca9538";
+		reg = <0x39>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	expander2: gpio@3a {
+		compatible = "ti,tca9538";
+		reg = <0x3a>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	expander3: gpio@3b {
+		compatible = "ti,tca9538";
+		reg = <0x3b>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	expander4: gpio@3c {
+		compatible = "ti,tca9538";
+		reg = <0x3c>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	expander5: gpio@3d {
+		compatible = "ti,tca9538";
+		reg = <0x3d>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+
+	expander6: gpio@3e {
+		compatible = "ti,tca9538";
+		reg = <0x3e>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+};
+
+&iris {
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/qcs8300/adsp.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/qcs8300/cdsp0.mbn";
+
+	status = "okay";
+};
+
+&remoteproc_gpdsp {
+	firmware-name = "qcom/qcs8300/gpdsp0.mbn";
+
+	status = "okay";
+};
+
+&serdes0 {
+	phy-supply = <&vreg_l4a>;
+
+	status = "okay";
+};
+
+&tlmm {
+	ethernet0_default: ethernet0-default-state {
+		ethernet0_mdc: ethernet0-mdc-pins {
+			pins = "gpio5";
+			function = "emac0_mdc";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+
+		ethernet0_mdio: ethernet0-mdio-pins {
+			pins = "gpio6";
+			function = "emac0_mdio";
+			drive-strength = <16>;
+			bias-pull-up;
+		};
+	};
+
+	qup_i2c1_default: qup-i2c1-state {
+		pins = "gpio19", "gpio20";
+		function = "qup0_se1";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	qup_i2c15_default: qup-i2c15-state {
+		pins = "gpio91", "gpio92";
+		function = "qup1_se7";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&uart7 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l8a>;
+	vcc-max-microamp = <1100000>;
+	vccq-supply = <&vreg_l4c>;
+	vccq-max-microamp = <1200000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l4a>;
+	vdda-pll-supply = <&vreg_l5a>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	dr_mode = "peripheral";
+
+	status = "okay";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l7a>;
+	vdda18-supply = <&vreg_l7c>;
+	vdda33-supply = <&vreg_l9a>;
+
+	status = "okay";
+};
+
+&usb_qmpphy {
+	vdda-phy-supply = <&vreg_l7a>;
+	vdda-pll-supply = <&vreg_l5a>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index de9fdc0dfc5f..d3a25a837488 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -1562,6 +1562,8 @@
 
 			interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
 
+			resets = <&gcc GCC_MDSS_BCR>;
+
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
@@ -1834,14 +1836,6 @@
 			iommus = <&apps_iommu 5>;
 			memory-region = <&venus_mem>;
 			status = "disabled";
-
-			video-decoder {
-				compatible = "venus-decoder";
-			};
-
-			video-encoder {
-				compatible = "venus-encoder";
-			};
 		};
 
 		apps_iommu: iommu@1ef0000 {
@@ -2133,6 +2127,7 @@
 				 <&gcc GCC_SDCC1_APPS_CLK>,
 				 <&xo_board>;
 			clock-names = "iface", "core", "xo";
+			resets = <&gcc GCC_SDCC1_BCR>;
 			pinctrl-0 = <&sdc1_default>;
 			pinctrl-1 = <&sdc1_sleep>;
 			pinctrl-names = "default", "sleep";
@@ -2154,6 +2149,7 @@
 				 <&gcc GCC_SDCC2_APPS_CLK>,
 				 <&xo_board>;
 			clock-names = "iface", "core", "xo";
+			resets = <&gcc GCC_SDCC2_BCR>;
 			pinctrl-0 = <&sdc2_default>;
 			pinctrl-1 = <&sdc2_sleep>;
 			pinctrl-names = "default", "sleep";
diff --git a/arch/arm64/boot/dts/qcom/msm8939.dtsi b/arch/arm64/boot/dts/qcom/msm8939.dtsi
index 68b92fdb996c..eb64ec35e7f0 100644
--- a/arch/arm64/boot/dts/qcom/msm8939.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8939.dtsi
@@ -1249,6 +1249,8 @@
 
 			power-domains = <&gcc MDSS_GDSC>;
 
+			resets = <&gcc GCC_MDSS_BCR>;
+
 			#address-cells = <1>;
 			#size-cells = <1>;
 			#interrupt-cells = <1>;
diff --git a/arch/arm64/boot/dts/qcom/msm8953-flipkart-rimob.dts b/arch/arm64/boot/dts/qcom/msm8953-flipkart-rimob.dts
new file mode 100644
index 000000000000..ef4faf763132
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8953-flipkart-rimob.dts
@@ -0,0 +1,255 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025, Cristian Cozzolino
+ */
+/dts-v1/;
+
+#include "msm8953.dtsi"
+#include "pm8953.dtsi"
+#include "pmi8950.dtsi"
+
+/delete-node/ &cont_splash_mem;
+/delete-node/ &qseecom_mem;
+
+/ {
+	model = "Billion Capture+";
+	compatible = "flipkart,rimob", "qcom,msm8953";
+	chassis-type = "handset";
+	qcom,msm-id = <293 0>;
+	qcom,board-id = <0x340008 0>;
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer@90001000 {
+			compatible = "simple-framebuffer";
+			reg = <0 0x90001000 0 (1920 * 1080 * 3)>;
+
+			width = <1080>;
+			height = <1920>;
+			stride = <(1080 * 3)>;
+			format = "r8g8b8";
+
+			power-domains = <&gcc MDSS_GDSC>;
+
+			clocks = <&gcc GCC_MDSS_AHB_CLK>,
+				 <&gcc GCC_MDSS_AXI_CLK>,
+				 <&gcc GCC_MDSS_VSYNC_CLK>,
+				 <&gcc GCC_MDSS_MDP_CLK>,
+				 <&gcc GCC_MDSS_BYTE0_CLK>,
+				 <&gcc GCC_MDSS_PCLK0_CLK>,
+				 <&gcc GCC_MDSS_ESC0_CLK>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&gpio_key_default>;
+		pinctrl-names = "default";
+
+		key-volume-up {
+			label = "Volume Up";
+			gpios = <&tlmm 85 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+		};
+	};
+
+	reserved-memory {
+		qseecom_mem: qseecom@84a00000 {
+			reg = <0x0 0x84a00000 0x0 0x1900000>;
+			no-map;
+		};
+
+		cont_splash_mem: cont-splash@90001000 {
+			reg = <0x0 0x90001000 0x0 (1080 * 1920 * 3)>;
+			no-map;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+
+&hsusb_phy {
+	vdd-supply = <&pm8953_l3>;
+	vdda-pll-supply = <&pm8953_l7>;
+	vdda-phy-dpdm-supply = <&pm8953_l13>;
+
+	status = "okay";
+};
+
+&pm8953_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&rpm_requests {
+	regulators {
+		compatible = "qcom,rpm-pm8953-regulators";
+		vdd_s1-supply = <&vph_pwr>;
+		vdd_s2-supply = <&vph_pwr>;
+		vdd_s3-supply = <&vph_pwr>;
+		vdd_s4-supply = <&vph_pwr>;
+		vdd_s5-supply = <&vph_pwr>;
+		vdd_s6-supply = <&vph_pwr>;
+		vdd_s7-supply = <&vph_pwr>;
+		vdd_l1-supply = <&pm8953_s3>;
+		vdd_l2_l3-supply = <&pm8953_s3>;
+		vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>;
+		vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>;
+		vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>;
+		vdd_l23-supply = <&pm8953_s3>;
+
+		pm8953_s1: s1 {
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <1156000>;
+		};
+
+		pm8953_s3: s3 {
+			regulator-min-microvolt = <1224000>;
+			regulator-max-microvolt = <1224000>;
+		};
+
+		pm8953_s4: s4 {
+			regulator-min-microvolt = <1900000>;
+			regulator-max-microvolt = <2050000>;
+		};
+
+		pm8953_l1: l1 {
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1000000>;
+		};
+
+		pm8953_l2: l2 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1225000>;
+		};
+
+		pm8953_l3: l3 {
+			regulator-min-microvolt = <925000>;
+			regulator-max-microvolt = <925000>;
+		};
+
+		pm8953_l5: l5 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-allow-set-load;
+		};
+
+		pm8953_l6: l6 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l7: l7 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1900000>;
+		};
+
+		pm8953_l8: l8 {
+			regulator-min-microvolt = <2900000>;
+			regulator-max-microvolt = <2900000>;
+			regulator-allow-set-load;
+		};
+
+		pm8953_l9: l9 {
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3300000>;
+		};
+
+		pm8953_l10: l10 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8953_l11: l11 {
+			regulator-min-microvolt = <2950000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		pm8953_l12: l12 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2950000>;
+			regulator-allow-set-load;
+		};
+
+		pm8953_l13: l13 {
+			regulator-min-microvolt = <3125000>;
+			regulator-max-microvolt = <3125000>;
+		};
+
+		pm8953_l16: l16 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+		};
+
+		pm8953_l17: l17 {
+			regulator-min-microvolt = <2850000>;
+			regulator-max-microvolt = <2850000>;
+		};
+
+		pm8953_l19: l19 {
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1350000>;
+		};
+
+		pm8953_l22: l22 {
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+		};
+
+		pm8953_l23: l23 {
+			regulator-min-microvolt = <975000>;
+			regulator-max-microvolt = <1225000>;
+		};
+	};
+};
+
+&sdhc_1 {
+	vmmc-supply = <&pm8953_l8>;
+	vqmmc-supply = <&pm8953_l5>;
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	vmmc-supply = <&pm8953_l11>;
+	vqmmc-supply = <&pm8953_l12>;
+
+	cd-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
+	pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <0 4>, <135 4>;
+
+	gpio_key_default: gpio-key-default-state {
+		pins = "gpio85";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+};
+
+&usb3 {
+	status = "okay";
+};
+
+&usb3_dwc3 {
+	dr_mode = "peripheral";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts
index 336b916729e4..ddd7af616794 100644
--- a/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts
+++ b/arch/arm64/boot/dts/qcom/msm8953-xiaomi-daisy.dts
@@ -296,7 +296,7 @@
 	vmmc-supply = <&pm8953_l11>;
 	vqmmc-supply = <&pm8953_l12>;
 
-	cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>;
+	cd-gpios = <&tlmm 133 GPIO_ACTIVE_HIGH>;
 
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_on>;
diff --git a/arch/arm64/boot/dts/qcom/msm8953.dtsi b/arch/arm64/boot/dts/qcom/msm8953.dtsi
index 273e79fb7569..76317c578349 100644
--- a/arch/arm64/boot/dts/qcom/msm8953.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8953.dtsi
@@ -775,45 +775,131 @@
 			};
 
 			spi_3_default: spi-3-default-state {
-				pins = "gpio10", "gpio11";
-				function = "blsp_spi3";
-				drive-strength = <2>;
-				bias-disable;
+				cs-pins {
+					pins = "gpio10";
+					function = "blsp_spi3";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio8", "gpio9", "gpio11";
+					function = "blsp_spi3";
+					drive-strength = <12>;
+					bias-disable;
+				};
 			};
 
 			spi_3_sleep: spi-3-sleep-state {
-				pins = "gpio10", "gpio11";
-				function = "gpio";
-				drive-strength = <2>;
-				bias-disable;
+				cs-pins {
+					pins = "gpio10";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio8", "gpio9", "gpio11";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
 			};
 
 			spi_5_default: spi-5-default-state {
-				pins = "gpio18", "gpio19";
-				function = "blsp_spi5";
-				drive-strength = <2>;
-				bias-disable;
+				cs-pins {
+					pins = "gpio18";
+					function = "blsp_spi5";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio16", "gpio17", "gpio19";
+					function = "blsp_spi5";
+					drive-strength = <12>;
+					bias-disable;
+				};
 			};
 
 			spi_5_sleep: spi-5-sleep-state {
-				pins = "gpio18", "gpio19";
-				function = "gpio";
-				drive-strength = <2>;
-				bias-disable;
+				cs-pins {
+					pins = "gpio18";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio16", "gpio17", "gpio19";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
 			};
 
 			spi_6_default: spi-6-default-state {
-				pins = "gpio22", "gpio23";
-				function = "blsp_spi6";
-				drive-strength = <2>;
-				bias-disable;
+				cs-pins {
+					pins = "gpio22";
+					function = "blsp_spi6";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio20", "gpio21", "gpio23";
+					function = "blsp_spi6";
+					drive-strength = <12>;
+					bias-disable;
+				};
 			};
 
 			spi_6_sleep: spi-6-sleep-state {
-				pins = "gpio22", "gpio23";
-				function = "gpio";
-				drive-strength = <2>;
-				bias-disable;
+				cs-pins {
+					pins = "gpio22";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio20", "gpio21", "gpio23";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			spi_7_default: spi-7-default-state {
+				cs-pins {
+					pins = "gpio136";
+					function = "blsp_spi7";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio135", "gpio137", "gpio138";
+					function = "blsp_spi7";
+					drive-strength = <12>;
+					bias-disable;
+				};
+			};
+
+			spi_7_sleep: spi-7-sleep-state {
+				cs-pins {
+					pins = "gpio136";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-disable;
+				};
+
+				spi-pins {
+					pins = "gpio135", "gpio137", "gpio138";
+					function = "gpio";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
 			};
 
 			uart_5_default: uart-5-default-state {
@@ -1147,7 +1233,7 @@
 
 			status = "disabled";
 
-			zap-shader {
+			gpu_zap_shader: zap-shader {
 				memory-region = <&zap_shader_region>;
 			};
 
@@ -1660,7 +1746,7 @@
 			reg = <0x078b7000 0x600>;
 			interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "core", "iface";
-			clocks = <&gcc GCC_BLSP1_QUP3_I2C_APPS_CLK>,
+			clocks = <&gcc GCC_BLSP1_QUP3_SPI_APPS_CLK>,
 				 <&gcc GCC_BLSP1_AHB_CLK>;
 			dmas = <&blsp1_dma 8>, <&blsp1_dma 9>;
 			dma-names = "tx", "rx";
@@ -1751,7 +1837,7 @@
 			reg = <0x07af5000 0x600>;
 			interrupts = <GIC_SPI 299 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "core", "iface";
-			clocks = <&gcc GCC_BLSP2_QUP1_I2C_APPS_CLK>,
+			clocks = <&gcc GCC_BLSP2_QUP1_SPI_APPS_CLK>,
 				<&gcc GCC_BLSP2_AHB_CLK>;
 			dmas = <&blsp2_dma 4>, <&blsp2_dma 5>;
 			dma-names = "tx", "rx";
@@ -1791,7 +1877,7 @@
 			reg = <0x07af6000 0x600>;
 			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
 			clock-names = "core", "iface";
-			clocks = <&gcc GCC_BLSP2_QUP2_I2C_APPS_CLK>,
+			clocks = <&gcc GCC_BLSP2_QUP2_SPI_APPS_CLK>,
 				 <&gcc GCC_BLSP2_AHB_CLK>;
 			dmas = <&blsp2_dma 6>, <&blsp2_dma 7>;
 			dma-names = "tx", "rx";
@@ -1826,6 +1912,26 @@
 			status = "disabled";
 		};
 
+		spi_7: spi@7af7000 {
+			compatible = "qcom,spi-qup-v2.2.1";
+			reg = <0x07af7000 0x600>;
+			interrupts = <GIC_SPI 301 IRQ_TYPE_LEVEL_HIGH>;
+			clock-names = "core", "iface";
+			clocks = <&gcc GCC_BLSP2_QUP3_SPI_APPS_CLK>,
+				 <&gcc GCC_BLSP2_AHB_CLK>;
+			dmas = <&blsp2_dma 8>, <&blsp2_dma 9>;
+			dma-names = "tx", "rx";
+
+			pinctrl-names = "default", "sleep";
+			pinctrl-0 = <&spi_7_default>;
+			pinctrl-1 = <&spi_7_sleep>;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+		};
+
 		i2c_8: i2c@7af8000 {
 			compatible = "qcom,i2c-qup-v2.2.1";
 			reg = <0x07af8000 0x600>;
diff --git a/arch/arm64/boot/dts/qcom/msm8976-longcheer-l9360.dts b/arch/arm64/boot/dts/qcom/msm8976-longcheer-l9360.dts
index e524d58cf0a4..18832a3b9a1c 100644
--- a/arch/arm64/boot/dts/qcom/msm8976-longcheer-l9360.dts
+++ b/arch/arm64/boot/dts/qcom/msm8976-longcheer-l9360.dts
@@ -190,6 +190,12 @@
 			reg = <0x12>;
 			syna,sensor-type = <1>;
 		};
+
+		rmi4-f1a@1a {
+			reg = <0x1a>;
+			/* Keys listed from right to left */
+			linux,keycodes = <KEY_APPSELECT KEY_HOMEPAGE KEY_BACK>;
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/qcom/msm8996.dtsi b/arch/arm64/boot/dts/qcom/msm8996.dtsi
index f91605de4909..c75b522f6eba 100644
--- a/arch/arm64/boot/dts/qcom/msm8996.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996.dtsi
@@ -1928,10 +1928,10 @@
 						  "msi7";
 				#interrupt-cells = <1>;
 				interrupt-map-mask = <0 0 0 0x7>;
-				interrupt-map = <0 0 0 1 &intc 0 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-						<0 0 0 2 &intc 0 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-						<0 0 0 3 &intc 0 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-						<0 0 0 4 &intc 0 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+				interrupt-map = <0 0 0 1 &intc GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+						<0 0 0 2 &intc GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+						<0 0 0 3 &intc GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+						<0 0 0 4 &intc GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 				pinctrl-names = "default", "sleep";
 				pinctrl-0 = <&pcie0_state_on>;
@@ -2005,10 +2005,10 @@
 						  "msi7";
 				#interrupt-cells = <1>;
 				interrupt-map-mask = <0 0 0 0x7>;
-				interrupt-map = <0 0 0 1 &intc 0 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-						<0 0 0 2 &intc 0 273 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-						<0 0 0 3 &intc 0 274 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-						<0 0 0 4 &intc 0 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+				interrupt-map = <0 0 0 1 &intc GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+						<0 0 0 2 &intc GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+						<0 0 0 3 &intc GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+						<0 0 0 4 &intc GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 				pinctrl-names = "default", "sleep";
 				pinctrl-0 = <&pcie1_state_on>;
@@ -2080,10 +2080,10 @@
 						  "msi7";
 				#interrupt-cells = <1>;
 				interrupt-map-mask = <0 0 0 0x7>;
-				interrupt-map = <0 0 0 1 &intc 0 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-						<0 0 0 2 &intc 0 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-						<0 0 0 3 &intc 0 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-						<0 0 0 4 &intc 0 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+				interrupt-map = <0 0 0 1 &intc GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+						<0 0 0 2 &intc GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+						<0 0 0 3 &intc GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+						<0 0 0 4 &intc GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 				pinctrl-names = "default", "sleep";
 				pinctrl-0 = <&pcie2_state_on>;
@@ -3766,6 +3766,7 @@
 
 		intc: interrupt-controller@9bc0000 {
 			compatible = "qcom,msm8996-gic-v3", "arm,gic-v3";
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			#redistributor-regions = <1>;
diff --git a/arch/arm64/boot/dts/qcom/msm8998.dtsi b/arch/arm64/boot/dts/qcom/msm8998.dtsi
index 0b0a9379cb05..5c75fba16ce2 100644
--- a/arch/arm64/boot/dts/qcom/msm8998.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8998.dtsi
@@ -3082,9 +3082,9 @@
 
 			mdss_hdmi: hdmi-tx@c9a0000 {
 				compatible = "qcom,hdmi-tx-8998";
-				reg =	<0x0c9a0000 0x50c>,
-					<0x00780000 0x6220>,
-					<0x0c9e0000 0x2c>;
+				reg = <0x0c9a0000 0x50c>,
+				      <0x00780000 0x6220>,
+				      <0x0c9e0000 0x2c>;
 				reg-names = "core_physical",
 					    "qfprom_physical",
 					    "hdcp_physical";
diff --git a/arch/arm64/boot/dts/qcom/pmk8550.dtsi b/arch/arm64/boot/dts/qcom/pmk8550.dtsi
index c7ac9b2eaacf..583f61fc16ad 100644
--- a/arch/arm64/boot/dts/qcom/pmk8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmk8550.dtsi
@@ -64,7 +64,7 @@
 			};
 		};
 
-		pmk8550_gpios: gpio@8800 {
+		pmk8550_gpios: gpio@b800 {
 			compatible = "qcom,pmk8550-gpio", "qcom,spmi-gpio";
 			reg = <0xb800>;
 			gpio-controller;
diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
index fa24b77a31a7..08141b41de24 100644
--- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi
@@ -154,6 +154,7 @@
 			compatible = "qcom,scm-qcm2290", "qcom,scm";
 			clocks = <&rpmcc RPM_SMD_CE1_CLK>;
 			clock-names = "core";
+			qcom,dload-mode = <&tcsr_regs 0x13000>;
 			#reset-cells = <1>;
 			interconnects = <&system_noc MASTER_CRYPTO_CORE0 RPM_ALWAYS_TAG
 					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>;
@@ -565,6 +566,20 @@
 				bias-disable;
 			};
 
+			cci0_default: cci0-default-state {
+				pins = "gpio22", "gpio23";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
+			cci1_default: cci1-default-state {
+				pins = "gpio29", "gpio30";
+				function = "cci_i2c";
+				drive-strength = <2>;
+				bias-disable;
+			};
+
 			sdc1_state_on: sdc1-on-state {
 				clk-pins {
 					pins = "sdc1_clk";
@@ -953,6 +968,11 @@
 			qcom,ddr-config = <0x80040868>;
 			bus-width = <8>;
 
+			mmc-ddr-1_8v;
+			mmc-hs200-1_8v;
+			mmc-hs400-1_8v;
+			mmc-hs400-enhanced-strobe;
+
 			status = "disabled";
 
 			sdhc1_opp_table: opp-table {
@@ -1454,6 +1474,7 @@
 				snps,has-lpm-erratum;
 				snps,hird-threshold = /bits/ 8 <0x10>;
 				snps,usb3_lpm_capable;
+				snps,parkmode-disable-ss-quirk;
 				maximum-speed = "super-speed";
 				dr_mode = "otg";
 				usb-role-switch;
@@ -1628,6 +1649,42 @@
 			#iommu-cells = <2>;
 		};
 
+		cci: cci@5c1b000 {
+			compatible = "qcom,qcm2290-cci", "qcom,msm8996-cci";
+			reg = <0x0 0x5c1b000 0x0 0x1000>;
+
+			interrupts = <GIC_SPI 206 IRQ_TYPE_EDGE_RISING>;
+
+			clocks = <&gcc GCC_CAMSS_TOP_AHB_CLK>, <&gcc GCC_CAMSS_CCI_0_CLK>;
+			clock-names = "ahb", "cci";
+			assigned-clocks = <&gcc GCC_CAMSS_CCI_0_CLK>;
+			assigned-clock-rates = <37500000>;
+
+			power-domains = <&gcc GCC_CAMSS_TOP_GDSC>;
+
+			pinctrl-0 = <&cci0_default &cci1_default>;
+			pinctrl-names = "default";
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			cci_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <400000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <400000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		camss: camss@5c6e000 {
 			compatible = "qcom,qcm2290-camss";
 
@@ -2096,6 +2153,61 @@
 				     <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		venus: video-codec@5a00000 {
+			compatible = "qcom,qcm2290-venus";
+			reg = <0 0x5a00000 0 0xf0000>;
+			interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
+
+			power-domains = <&gcc GCC_VENUS_GDSC>,
+					<&gcc GCC_VCODEC0_GDSC>,
+					<&rpmpd QCM2290_VDDCX>;
+			power-domain-names = "venus",
+					     "vcodec0",
+					     "cx";
+			operating-points-v2 = <&venus_opp_table>;
+
+			clocks = <&gcc GCC_VIDEO_VENUS_CTL_CLK>,
+				 <&gcc GCC_VIDEO_AHB_CLK>,
+				 <&gcc GCC_VENUS_CTL_AXI_CLK>,
+				 <&gcc GCC_VIDEO_THROTTLE_CORE_CLK>,
+				 <&gcc GCC_VIDEO_VCODEC0_SYS_CLK>,
+				 <&gcc GCC_VCODEC0_AXI_CLK>;
+			clock-names = "core",
+				      "iface",
+				      "bus",
+				      "throttle",
+				      "vcodec0_core",
+				      "vcodec0_bus";
+
+			memory-region = <&pil_video_mem>;
+			iommus = <&apps_smmu 0x860 0x0>,
+				 <&apps_smmu 0x880 0x0>,
+				 <&apps_smmu 0x861 0x04>,
+				 <&apps_smmu 0x863 0x0>,
+				 <&apps_smmu 0x804 0xe0>;
+
+			interconnects = <&mmnrt_virt MASTER_VIDEO_P0 RPM_ALWAYS_TAG
+					 &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>,
+					<&bimc MASTER_APPSS_PROC RPM_ACTIVE_TAG
+					 &config_noc SLAVE_VENUS_CFG RPM_ACTIVE_TAG>;
+			interconnect-names = "video-mem",
+					     "cpu-cfg";
+
+			venus_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-133333333 {
+					opp-hz = /bits/ 64 <133333333>;
+					required-opps = <&rpmpd_opp_low_svs>;
+				};
+
+				opp-240000000 {
+					opp-hz = /bits/ 64 <240000000>;
+					required-opps = <&rpmpd_opp_svs>;
+				};
+			};
+		};
+
 		wifi: wifi@c800000 {
 			compatible = "qcom,wcn3990-wifi";
 			reg = <0x0 0x0c800000 0x0 0x800000>;
diff --git a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
index e115b6a52b29..519e458e1a89 100644
--- a/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
+++ b/arch/arm64/boot/dts/qcom/qcm6490-fairphone-fp5.dts
@@ -1176,6 +1176,22 @@
 			sound-dai = <&q6routing>;
 		};
 	};
+
+	usb-dai-link {
+		link-name = "USB Playback";
+
+		codec {
+			sound-dai = <&q6usbdai USB_RX>;
+		};
+
+		cpu {
+			sound-dai = <&q6afedai USB_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
 };
 
 &spi13 {
@@ -1364,12 +1380,10 @@
 };
 
 &usb_1 {
-	status = "okay";
-};
-
-&usb_1_dwc3 {
 	dr_mode = "otg";
 	usb-role-switch;
+
+	status = "okay";
 };
 
 &usb_1_dwc3_hs {
diff --git a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
index 7a155ef6492e..73fce639370c 100644
--- a/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
+++ b/arch/arm64/boot/dts/qcom/qcm6490-idp.dts
@@ -18,6 +18,7 @@
 #include "pm7325.dtsi"
 #include "pm8350c.dtsi"
 #include "pmk8350.dtsi"
+#include "qcs6490-audioreach.dtsi"
 
 /delete-node/ &ipa_fw_mem;
 /delete-node/ &rmtfs_mem;
@@ -169,6 +170,30 @@
 		regulator-min-microvolt = <3700000>;
 		regulator-max-microvolt = <3700000>;
 	};
+
+	wcd9370: audio-codec-0 {
+		compatible = "qcom,wcd9370-codec";
+
+		pinctrl-0 = <&wcd_default>;
+		pinctrl-names = "default";
+
+		reset-gpios = <&tlmm 83 GPIO_ACTIVE_HIGH>;
+
+		vdd-buck-supply = <&vreg_l17b_1p7>;
+		vdd-rxtx-supply = <&vreg_l18b_1p8>;
+		vdd-px-supply = <&vreg_l18b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob_3p296>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+
+		qcom,rx-device = <&wcd937x_rx>;
+		qcom,tx-device = <&wcd937x_tx>;
+
+		#sound-dai-cells = <1>;
+	};
 };
 
 &apps_rsc {
@@ -536,6 +561,22 @@
 	firmware-name = "qcom/qcm6490/a660_zap.mbn";
 };
 
+&lpass_rx_macro {
+	status = "okay";
+};
+
+&lpass_tx_macro {
+	status = "okay";
+};
+
+&lpass_va_macro {
+	status = "okay";
+};
+
+&lpass_wsa_macro {
+	status = "okay";
+};
+
 &mdss {
 	status = "okay";
 };
@@ -716,6 +757,165 @@
 	cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
 };
 
+&sound {
+	compatible = "qcom,qcm6490-idp-sndcard";
+	model = "QCM6490-IDP";
+
+	audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
+			"SpkrRight IN", "WSA_SPK2 OUT",
+			"IN1_HPHL", "HPHL_OUT",
+			"IN2_HPHR", "HPHR_OUT",
+			"AMIC2", "MIC BIAS2",
+			"TX DMIC0", "MIC BIAS1",
+			"TX DMIC1", "MIC BIAS2",
+			"TX DMIC2", "MIC BIAS3",
+			"TX SWR_ADC1", "ADC2_OUTPUT",
+			"VA DMIC0", "VA MIC BIAS3",
+			"VA DMIC1", "VA MIC BIAS3",
+			"VA DMIC2", "VA MIC BIAS1",
+			"VA DMIC3", "VA MIC BIAS1";
+
+	wsa-dai-link {
+		link-name = "WSA Playback";
+
+		codec {
+			sound-dai = <&left_spkr>, <&right_spkr>,
+				    <&swr2 0>, <&lpass_wsa_macro 0>;
+		};
+
+		cpu {
+			sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	wcd-playback-dai-link {
+		link-name = "WCD Playback";
+
+		codec {
+			sound-dai = <&wcd9370 0>, <&swr0 0>, <&lpass_rx_macro 0>;
+		};
+
+		cpu {
+			sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	wcd-capture-dai-link {
+		link-name = "WCD Capture";
+
+		codec {
+			sound-dai = <&wcd9370 1>, <&swr1 0>, <&lpass_tx_macro 0>;
+		};
+
+		cpu {
+			sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	va-dai-link {
+		link-name = "VA Capture";
+
+		codec {
+			sound-dai = <&lpass_va_macro 0>;
+		};
+
+		cpu {
+			sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+};
+
+&swr0 {
+	status = "okay";
+
+	wcd937x_rx: codec@0,4 {
+		compatible = "sdw20217010a00";
+		reg = <0 4>;
+
+		/*
+		 * WCD9370 RX Port 1 (HPH_L/R)       <==>    SWR1 Port 1 (HPH_L/R)
+		 * WCD9370 RX Port 2 (CLSH)          <==>    SWR1 Port 2 (CLSH)
+		 * WCD9370 RX Port 3 (COMP_L/R)      <==>    SWR1 Port 3 (COMP_L/R)
+		 * WCD9370 RX Port 4 (LO)            <==>    SWR1 Port 4 (LO)
+		 * WCD9370 RX Port 5 (DSD_L/R)       <==>    SWR1 Port 5 (DSD)
+		 */
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+
+		/*
+		 * Static channels mapping between slave and master rx port channels.
+		 * In the order of slave port channels, which is
+		 * hph_l, hph_r, clsh, comp_l, comp_r, lo, dsd_r, dsd_l.
+		 */
+		qcom,rx-channel-mapping = /bits/ 8 <1 2 1 1 2 1 1 2>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	wcd937x_tx: codec@0,3 {
+		compatible = "sdw20217010a00";
+		reg = <0 3>;
+
+		/*
+		 * WCD9370 TX Port 1 (ADC1)               <=> SWR2 Port 2
+		 * WCD9370 TX Port 2 (ADC2, 3)            <=> SWR2 Port 2
+		 * WCD9370 TX Port 3 (DMIC0,1,2,3 & MBHC) <=> SWR2 Port 3
+		 * WCD9370 TX Port 4 (DMIC4,5,6,7)        <=> SWR2 Port 4
+		 */
+		qcom,tx-port-mapping = <1 1 2 3>;
+
+		/*
+		 * Static channel mapping between slave and master tx port channels.
+		 * In the order of slave port channels which is adc1, adc2, adc3,
+		 * mic0, dmic1, mbhc, dmic2, dmic3, dmci4, dmic5, dmic6, dmic7.
+		 */
+		qcom,tx-channel-mapping = /bits/ 8 <1 2 1 1 2 3 3 4 1 2 3 4>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	left_spkr: speaker@0,1 {
+		compatible = "sdw10217020200";
+		reg = <0 1>;
+		powerdown-gpios = <&tlmm 63 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		#thermal-sensor-cells = <0>;
+		vdd-supply = <&vreg_l18b_1p8>;
+		qcom,port-mapping = <1 2 3 7>;
+	};
+
+	right_spkr: speaker@0,2 {
+		compatible = "sdw10217020200";
+		reg = <0 2>;
+		powerdown-gpios = <&tlmm 62 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		#thermal-sensor-cells = <0>;
+		vdd-supply = <&vreg_l18b_1p8>;
+		qcom,port-mapping = <4 5 6 8>;
+	};
+};
+
 &tlmm {
 	gpio-reserved-ranges = <32 2>, /* ADSP */
 			       <48 4>; /* NFC */
@@ -725,6 +925,13 @@
 		function = "gpio";
 		bias-pull-up;
 	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio83";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
 };
 
 &uart5 {
@@ -751,12 +958,9 @@
 };
 
 &usb_1 {
-	status = "okay";
-};
-
-&usb_1_dwc3 {
-	/delete-property/ usb-role-switch;
 	dr_mode = "peripheral";
+
+	status = "okay";
 };
 
 &usb_1_hsphy {
diff --git a/arch/arm64/boot/dts/qcom/qcm6490-particle-tachyon.dts b/arch/arm64/boot/dts/qcom/qcm6490-particle-tachyon.dts
new file mode 100644
index 000000000000..251e72f11428
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcm6490-particle-tachyon.dts
@@ -0,0 +1,864 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ * Copyright (c) 2023, Luca Weiss <luca.weiss@fairphone.com>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/iio/qcom,spmi-adc7-pmk8350.h>
+#include <dt-bindings/iio/qcom,spmi-adc7-pm7325.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sc7280.dtsi"
+#include "pm8350c.dtsi"
+#include "pmk8350.dtsi"
+
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &rmtfs_mem;
+/delete-node/ &xbl_mem;
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &wpss_mem;
+
+/ {
+	model = "Particle Tachyon";
+	compatible = "particle,tachyon", "qcom,qcm6490";
+	chassis-type = "embedded";
+
+	aliases {
+		serial0 = &uart5;
+		serial1 = &uart12;
+		serial2 = &uart7;
+		serial3 = &uart8;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-0 = <&activity_led_state>;
+		pinctrl-names = "default";
+
+		led-activity {
+			function = LED_FUNCTION_ACTIVITY;
+			color = <LED_COLOR_ID_RED>;
+			gpios = <&tlmm 14 GPIO_ACTIVE_HIGH>;
+			default-state = "on";
+			panic-indicator;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,qcm6490-pmic-glink", "qcom,pmic-glink";
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 140 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_dp_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_sbu_in: endpoint {
+						remote-endpoint = <&usbdp_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	vreg_power_5v: regulator-power-5v {
+		compatible = "regulator-fixed";
+		regulator-name = "power_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&tlmm 13 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+
+	reserved-memory {
+		xbl_mem: xbl@80700000 {
+			reg = <0x0 0x80700000 0x0 0x100000>;
+			no-map;
+		};
+
+		tz_stat_mem: tz-stat@c0000000 {
+			reg = <0x0 0xc0000000 0x0 0x100000>;
+			no-map;
+		};
+
+		tags_mem: tags@c0100000 {
+			reg = <0x0 0xc0100000 0x0 0x1200000>;
+			no-map;
+		};
+
+		qtee_mem: qtee@c1300000 {
+			reg = <0x0 0xc1300000 0x0 0x500000>;
+			no-map;
+		};
+
+		trusted_apps_mem: trusted-apps@c1800000 {
+			reg = <0x0 0xc1800000 0x0 0x1c00000>;
+			no-map;
+		};
+
+		debug_vm_mem: debug-vm@d0600000 {
+			reg = <0x0 0xd0600000 0x0 0x100000>;
+			no-map;
+		};
+
+		adsp_mem: adsp@86100000 {
+			reg = <0x0 0x86700000 0x0 0x2800000>;
+			no-map;
+		};
+
+		cdsp_mem: cdsp@88900000 {
+			reg = <0x0 0x88f00000 0x0 0x1e00000>;
+			no-map;
+		};
+
+		wpss_mem: wpss@9ae00000 {
+			reg = <0x0 0x9ae00000 0x0 0x1900000>;
+			no-map;
+		};
+
+		mpss_mem: mpss@8b800000 {
+			reg = <0x0 0x8b800000 0x0 0xf600000>;
+			no-map;
+		};
+
+		ipa_fw_mem: ipa-fw@8b300000 {
+			reg = <0x0 0x8b700000 0x0 0x10000>;
+			no-map;
+		};
+
+		ipa_gsi_mem: ipa-gsi@8b310000 {
+			reg = <0x0 0x8b710000 0x0 0xa000>;
+			no-map;
+		};
+
+		rmtfs_mem: memory@f8500000 {
+			compatible = "qcom,rmtfs-mem";
+			reg = <0x0 0xf8500000 0x0 0x600000>;
+			no-map;
+
+			qcom,client-id = <1>;
+			qcom,vmid = <QCOM_SCM_VMID_MSS_MSA>, <QCOM_SCM_VMID_NAV>;
+		};
+	};
+
+
+	usbdp-sbu-mux {
+		compatible = "pericom,pi3usb102", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 108 GPIO_ACTIVE_HIGH>;
+		select-gpios = <&tlmm 42 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&usbdp_sbu_default>;
+		pinctrl-names = "default";
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usbdp_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_sbu_in>;
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm7325-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-l1-l4-l12-l15-supply = <&vreg_s7b_0p972>;
+		vdd-l2-l7-supply = <&vreg_bob_3p296>;
+		vdd-l6-l9-l10-supply = <&vreg_s8b_1p272>;
+		vdd-l8-supply = <&vreg_s7b_0p972>;
+		vdd-l11-l17-l18-l19-supply = <&vreg_s1b_1p872>;
+		vdd-l13-supply = <&vreg_s7b_0p972>;
+		vdd-l14-l16-supply = <&vreg_s8b_1p272>;
+
+		vreg_s1b_1p872: smps1 {
+			regulator-name = "vreg_s1b_1p872";
+			regulator-min-microvolt = <1840000>;
+			regulator-max-microvolt = <2040000>;
+		};
+
+		vreg_s7b_0p972: smps7 {
+			regulator-name = "vreg_s7b_0p972";
+			regulator-min-microvolt = <535000>;
+			regulator-max-microvolt = <1120000>;
+		};
+
+		vreg_s8b_1p272: smps8 {
+			regulator-name = "vreg_s8b_1p272";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1500000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_RET>;
+		};
+
+		vreg_l1b_0p912: ldo1 {
+			regulator-name = "vreg_l1b_0p912";
+			regulator-min-microvolt = <825000>;
+			regulator-max-microvolt = <925000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p072: ldo2 {
+			regulator-name = "vreg_l2b_3p072";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3b_0p504: ldo3 {
+			regulator-name = "vreg_l3b_0p504";
+			regulator-min-microvolt = <312000>;
+			regulator-max-microvolt = <910000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p2: ldo6 {
+			regulator-name = "vreg_l6b_1p2";
+			regulator-min-microvolt = <1140000>;
+			regulator-max-microvolt = <1260000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p952: ldo7 {
+			regulator-name = "vreg_l7b_2p952";
+			regulator-min-microvolt = <2952000>;
+			regulator-max-microvolt = <2952000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_0p904: ldo8 {
+			regulator-name = "vreg_l8b_0p904";
+			regulator-min-microvolt = <870000>;
+			regulator-max-microvolt = <970000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_1p2: ldo9 {
+			regulator-name = "vreg_l9b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11b_1p504: ldo11 {
+			regulator-name = "vreg_l11b_1p504";
+			regulator-min-microvolt = <1504000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_0p751: ldo12 {
+			regulator-name = "vreg_l12b_0p751";
+			regulator-min-microvolt = <751000>;
+			regulator-max-microvolt = <824000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_0p53: ldo13 {
+			regulator-name = "vreg_l13b_0p53";
+			regulator-min-microvolt = <530000>;
+			regulator-max-microvolt = <824000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_1p08: ldo14 {
+			regulator-name = "vreg_l14b_1p08";
+			regulator-min-microvolt = <1080000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_0p765: ldo15 {
+			regulator-name = "vreg_l15b_0p765";
+			regulator-min-microvolt = <765000>;
+			regulator-max-microvolt = <1020000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l16b_1p1: ldo16 {
+			regulator-name = "vreg_l16b_1p1";
+			regulator-min-microvolt = <1100000>;
+			regulator-max-microvolt = <1300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_1p7: ldo17 {
+			regulator-name = "vreg_l17b_1p7";
+			regulator-min-microvolt = <1700000>;
+			regulator-max-microvolt = <1900000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l18b_1p8: ldo18 {
+			regulator-name = "vreg_l18b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l19b_1p8: ldo19 {
+			regulator-name = "vreg_l19b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-l1-l12-supply = <&vreg_s1b_1p872>;
+		vdd-l2-l8-supply = <&vreg_s1b_1p872>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob_3p296>;
+		vdd-l6-l9-l11-supply = <&vreg_bob_3p296>;
+		vdd-l10-supply = <&vreg_s7b_0p972>;
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_s1c_2p19: smps1 {
+			regulator-name = "vreg_s1c_2p19";
+			regulator-min-microvolt = <2190000>;
+			regulator-max-microvolt = <2210000>;
+		};
+
+		vreg_s9c_1p084: smps9 {
+			regulator-name = "vreg_s9c_1p084";
+			regulator-min-microvolt = <1084000>;
+			regulator-max-microvolt = <1170000>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-name = "vreg_l1c_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_1p62: ldo2 {
+			regulator-name = "vreg_l2c_1p62";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <1980000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_2p8: ldo3 {
+			regulator-name = "vreg_l3c_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3540000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4c_1p62: ldo4 {
+			regulator-name = "vreg_l4c_1p62";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5c_1p62: ldo5 {
+			regulator-name = "vreg_l5c_1p62";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6c_2p96: ldo6 {
+			regulator-name = "vreg_l6c_2p96";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7c_3p0: ldo7 {
+			regulator-name = "vreg_l7c_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8c_1p62: ldo8 {
+			regulator-name = "vreg_l8c_1p62";
+			regulator-min-microvolt = <1620000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9c_2p96: ldo9 {
+			regulator-name = "vreg_l9c_2p96";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10c_0p88: ldo10 {
+			regulator-name = "vreg_l10c_0p88";
+			regulator-min-microvolt = <720000>;
+			regulator-max-microvolt = <1050000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l11c_2p8: ldo11 {
+			regulator-name = "vreg_l11c_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12c_1p65: ldo12 {
+			regulator-name = "vreg_l12c_1p65";
+			regulator-min-microvolt = <1650000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13c_2p7: ldo13 {
+			regulator-name = "vreg_l13c_2p7";
+			regulator-min-microvolt = <2700000>;
+			regulator-max-microvolt = <3544000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob_3p296: bob {
+			regulator-name = "vreg_bob_3p296";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+
+	status = "okay";
+};
+
+&ipa {
+	firmware-name = "qcom/qcm6490/particle/tachyon/ipa_fws.mbn";
+	qcom,gsi-loader = "self";
+	memory-region = <&ipa_fw_mem>;
+
+	status = "okay";
+};
+
+&gcc {
+	protected-clocks = <GCC_CFG_NOC_LPASS_CLK>,
+			   <GCC_MSS_CFG_AHB_CLK>,
+			   <GCC_MSS_GPLL0_MAIN_DIV_CLK_SRC>,
+			   <GCC_MSS_OFFLINE_AXI_CLK>,
+			   <GCC_MSS_Q6SS_BOOT_CLK_SRC>,
+			   <GCC_MSS_Q6_MEMNOC_AXI_CLK>,
+			   <GCC_MSS_SNOC_AXI_CLK>,
+			   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+			   <GCC_QSPI_CORE_CLK>,
+			   <GCC_QSPI_CORE_CLK_SRC>,
+			   <GCC_SEC_CTRL_CLK_SRC>,
+			   <GCC_WPSS_AHB_BDG_MST_CLK>,
+			   <GCC_WPSS_AHB_CLK>,
+			   <GCC_WPSS_RSCP_CLK>;
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/qcm6490/particle/tachyon/a660_zap.mbn";
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp {
+	status = "okay";
+};
+
+&mdss_dp_out {
+	data-lanes = <0 1>;
+};
+
+&pcie0 {
+	perst-gpios = <&tlmm 87 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 89 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&pcie0_reset_n>, <&pcie0_wake_n>, <&pcie0_clkreq_n>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l10c_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+
+	status = "okay";
+};
+
+&pcie1 {
+	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie1_reset_n>, <&pcie1_wake_n>, <&pcie1_clkreq_n>;
+	pinctrl-names = "default";
+
+	vddpe-3v3-supply = <&vreg_power_5v>;
+
+	status = "okay";
+};
+
+&pcie1_phy {
+	vdda-phy-supply = <&vreg_l10c_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+
+	status = "okay";
+};
+
+&pmk8350_adc_tm {
+	status = "okay";
+
+	xo-therm@0 {
+		reg = <0>;
+		io-channels = <&pmk8350_vadc PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time-us = <200>;
+	};
+};
+
+&pmk8350_rtc {
+	status = "okay";
+};
+
+&pmk8350_vadc {
+	status = "okay";
+
+	channel@44 {
+		reg = <PMK8350_ADC7_AMUX_THM1_100K_PU>;
+		qcom,ratiometric;
+		qcom,hw-settle-time = <200>;
+		qcom,pre-scaling = <1 1>;
+		label = "pmk8350_xo_therm";
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&qupv3_id_0 {
+	status = "okay";
+};
+
+&qupv3_id_1 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/qcm6490/particle/tachyon/adsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/qcm6490/particle/tachyon/cdsp.mbn";
+	status = "okay";
+};
+
+&remoteproc_mpss {
+	firmware-name = "qcom/qcm6490/particle/tachyon/modem.mbn";
+	status = "okay";
+};
+
+&sdc2_clk {
+	bias-disable;
+	drive-strength = <16>;
+};
+
+&sdc2_cmd {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdc2_data {
+	bias-pull-up;
+	drive-strength = <10>;
+};
+
+&sdhc_2 {
+	vmmc-supply = <&vreg_l9c_2p96>;
+	vqmmc-supply = <&vreg_l6c_2p96>;
+
+	cd-gpios = <&tlmm 91 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&tlmm {
+	activity_led_state: activity-led-state {
+		pins = "gpio14";
+		function = "gpio";
+		bias-disable;
+	};
+
+	bt_en_state: bt-default-state {
+		pins = "gpio84";
+		function = "gpio";
+		drive-strength = <16>;
+		output-low;
+		bias-pull-up;
+	};
+
+	pcie0_reset_n: pcie0-reset-n-state {
+		pins = "gpio87";
+		function = "gpio";
+		drive-strength = <16>;
+		output-low;
+		bias-disable;
+	};
+
+	pcie0_wake_n: pcie0-wake-n-state {
+		pins = "gpio89";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	pcie1_reset_n: pcie1-reset-n-state {
+		pins = "gpio2";
+		function = "gpio";
+		drive-strength = <16>;
+		output-low;
+		bias-disable;
+	};
+
+	pcie1_wake_n: pcie1-wake-n-state {
+		pins = "gpio3";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	qup_uart7_sleep_cts: qup-uart7-sleep-cts-state {
+		pins = "gpio28";
+		function = "gpio";
+		/*
+		 * Configure a bias-bus-hold on CTS to lower power
+		 * usage when Bluetooth is turned off. Bus hold will
+		 * maintain a low power state regardless of whether
+		 * the Bluetooth module drives the pin in either
+		 * direction or leaves the pin fully unpowered.
+		 */
+		bias-bus-hold;
+	};
+
+	qup_uart7_sleep_rts: qup-uart7-sleep-rts-state {
+		pins = "gpio29";
+		function = "gpio";
+		/*
+		 * Configure pull-down on RTS. As RTS is active low
+		 * signal, pull it low to indicate the BT SoC that it
+		 * can wakeup the system anytime from suspend state by
+		 * pulling RX low (by sending wakeup bytes).
+		 */
+		bias-pull-down;
+	};
+
+	qup_uart7_sleep_tx: qup-uart7-sleep-tx-state {
+		pins = "gpio30";
+		function = "gpio";
+		/*
+		 * Configure pull-up on TX when it isn't actively driven
+		 * to prevent BT SoC from receiving garbage during sleep.
+		 */
+		bias-pull-up;
+	};
+
+	qup_uart7_sleep_rx: qup-uart7-sleep-rx-state {
+		pins = "gpio31";
+		function = "gpio";
+		/*
+		 * Configure a pull-up on RX. This is needed to avoid
+		 * garbage data when the TX pin of the Bluetooth module
+		 * is floating which may cause spurious wakeups.
+		 */
+		bias-pull-up;
+	};
+
+	usbdp_sbu_default: usbdp-sbu-state {
+		oe-n-pins {
+			pins = "gpio108";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+			output-high;
+		};
+
+		sel-pins {
+			pins = "gpio42";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <16>;
+		};
+	};
+
+	wlan_en_state: wlan-default-state {
+		pins = "gpio85";
+		function = "gpio";
+		drive-strength = <16>;
+		output-low;
+		bias-pull-up;
+	};
+};
+
+&uart5 {
+	status = "okay";
+};
+
+&uart7 {
+	/delete-property/ interrupts;
+	interrupts-extended = <&intc GIC_SPI 608 IRQ_TYPE_LEVEL_HIGH>,
+			      <&tlmm 31 IRQ_TYPE_EDGE_FALLING>;
+
+	pinctrl-1 = <&qup_uart7_sleep_cts>,
+		    <&qup_uart7_sleep_rts>,
+		    <&qup_uart7_sleep_tx>,
+		    <&qup_uart7_sleep_rx>;
+	pinctrl-names = "default", "sleep";
+
+	status = "okay";
+};
+
+&uart8 {
+	status = "okay";
+};
+
+&uart12 {
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	reset-gpios = <&tlmm 175 GPIO_ACTIVE_LOW>;
+	vcc-supply = <&vreg_l7b_2p952>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l9b_1p2>;
+	vccq-max-microamp = <900000>;
+	vccq2-supply = <&vreg_l9b_1p2>;
+	vccq2-max-microamp = <900000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l10c_0p88>;
+	vdda-pll-supply = <&vreg_l6b_1p2>;
+
+	status = "okay";
+};
+
+&usb_1 {
+	dr_mode = "otg";
+	usb-role-switch;
+
+	status = "okay";
+};
+
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l10c_0p88>;
+	vdda33-supply = <&vreg_l2b_3p072>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+
+	status = "okay";
+};
+
+&usb_1_qmpphy {
+	vdda-phy-supply = <&vreg_l6b_1p2>;
+	vdda-pll-supply = <&vreg_l1b_0p912>;
+
+	status = "okay";
+};
+
+&usb_2 {
+	dr_mode = "host";
+
+	status = "okay";
+};
+
+&usb_2_hsphy {
+	vdda-pll-supply = <&vreg_l10c_0p88>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+	vdda33-supply = <&vreg_l2b_3p072>;
+
+	status = "okay";
+};
+
+&usb_dp_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
diff --git a/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts b/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts
index b9a0f7ac4d9c..eb8efba1b9dd 100644
--- a/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts
+++ b/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts
@@ -910,12 +910,10 @@
 };
 
 &usb_1 {
-	status = "okay";
-};
-
-&usb_1_dwc3 {
 	dr_mode = "otg";
 	usb-role-switch;
+
+	status = "okay";
 };
 
 &usb_1_dwc3_hs {
diff --git a/arch/arm64/boot/dts/qcom/qcs404.dtsi b/arch/arm64/boot/dts/qcom/qcs404.dtsi
index 5a9df6b12305..4328c1dda898 100644
--- a/arch/arm64/boot/dts/qcom/qcs404.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs404.dtsi
@@ -1312,6 +1312,7 @@
 		intc: interrupt-controller@b000000 {
 			compatible = "qcom,msm-qgic2";
 			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			reg = <0x0b000000 0x1000>,
 			      <0x0b002000 0x1000>;
diff --git a/arch/arm64/boot/dts/qcom/qcs615-ride.dts b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
index a6652e4817d1..705ea71b07a1 100644
--- a/arch/arm64/boot/dts/qcom/qcs615-ride.dts
+++ b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
@@ -7,17 +7,18 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
 #include <dt-bindings/gpio/gpio.h>
-#include "qcs615.dtsi"
+#include "sm6150.dtsi"
 #include "pm8150.dtsi"
 / {
 	model = "Qualcomm Technologies, Inc. QCS615 Ride";
-	compatible = "qcom,qcs615-ride", "qcom,qcs615";
+	compatible = "qcom,qcs615-ride", "qcom,qcs615", "qcom,sm6150";
 	chassis-type = "embedded";
 
 	aliases {
 		mmc0 = &sdhc_1;
 		mmc1 = &sdhc_2;
 		serial0 = &uart0;
+		serial1 = &uart7;
 	};
 
 	chosen {
@@ -38,6 +39,22 @@
 		};
 	};
 
+	vreg_conn_1p8: regulator-conn-1p8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_conn_1p8";
+		startup-delay-us = <4000>;
+		enable-active-high;
+		gpio = <&pm8150_gpios 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	vreg_conn_pa: regulator-conn-pa {
+		compatible = "regulator-fixed";
+		regulator-name = "vreg_conn_pa";
+		startup-delay-us = <4000>;
+		enable-active-high;
+		gpio = <&pm8150_gpios 6 GPIO_ACTIVE_HIGH>;
+	};
+
 	regulator-usb2-vbus {
 		compatible = "regulator-fixed";
 		regulator-name = "USB2_VBUS";
@@ -47,6 +64,69 @@
 		enable-active-high;
 		regulator-always-on;
 	};
+
+	wcn6855-pmu {
+		compatible = "qcom,wcn6855-pmu";
+
+		pinctrl-0 = <&bt_en_state>, <&wlan_en_state>;
+		pinctrl-names = "default";
+
+		bt-enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+		wlan-enable-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
+
+		vddio-supply = <&vreg_conn_pa>;
+		vddaon-supply = <&vreg_s5a>;
+		vddpmu-supply = <&vreg_conn_1p8>;
+		vddpmumx-supply = <&vreg_conn_1p8>;
+		vddpmucx-supply = <&vreg_conn_pa>;
+		vddrfa0p95-supply = <&vreg_s5a>;
+		vddrfa1p3-supply = <&vreg_s6a>;
+		vddrfa1p9-supply = <&vreg_l15a>;
+		vddpcie1p3-supply = <&vreg_s6a>;
+		vddpcie1p9-supply = <&vreg_l15a>;
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p7: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p7";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -166,10 +246,7 @@
 			regulator-name = "vreg_l12a";
 			regulator-min-microvolt = <1800000>;
 			regulator-max-microvolt = <1890000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_LPM>;
-			regulator-allow-set-load;
-			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
-						   RPMH_REGULATOR_MODE_HPM>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
 		vreg_l13a: ldo13 {
@@ -211,10 +288,40 @@
 	};
 };
 
-&gcc {
-	clocks = <&rpmhcc RPMH_CXO_CLK>,
-		 <&rpmhcc RPMH_CXO_CLK_A>,
-		 <&sleep_clk>;
+&pcie {
+	perst-gpios = <&tlmm 101 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 100 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&pcie_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie_phy {
+	vdda-phy-supply = <&vreg_l5a>;
+	vdda-pll-supply = <&vreg_l12a>;
+
+	status = "okay";
+};
+
+&pcie_port0 {
+	wifi@0 {
+		compatible = "pci17cb,1103";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		qcom,calibration-variant = "QC_QCS615_Ride";
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+	};
 };
 
 &pm8150_gpios {
@@ -240,6 +347,10 @@
 	status = "okay";
 };
 
+&qupv3_id_1 {
+	status = "okay";
+};
+
 &remoteproc_adsp {
 	firmware-name = "qcom/qcs615/adsp.mbn";
 
@@ -252,8 +363,43 @@
 	status = "okay";
 };
 
-&rpmhcc {
-	clocks = <&xo_board_clk>;
+&tlmm {
+	bt_en_state: bt-en-state {
+		pins = "gpio85";
+		function = "gpio";
+		bias-pull-down;
+		output-low;
+	};
+
+	pcie_default_state: pcie-default-state {
+		clkreq-pins {
+			pins = "gpio90";
+			function = "pcie_clk_req";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-pins {
+			pins = "gpio101";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-pins {
+			pins = "gpio100";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	wlan_en_state: wlan-en-state {
+		pins = "gpio98";
+		function = "gpio";
+		bias-pull-down;
+		output-low;
+	};
 };
 
 &sdhc_1 {
@@ -294,6 +440,24 @@
 	status = "okay";
 };
 
+&uart7 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn6855-bt";
+		firmware-name = "QCA6698/hpnv21", "QCA6698/hpbtfw21.tlv";
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+	};
+};
+
 &usb_1_hsphy {
 	vdd-supply = <&vreg_l5a>;
 	vdda-pll-supply = <&vreg_l12a>;
@@ -350,6 +514,6 @@
 	status = "okay";
 };
 
-&watchdog {
-	clocks = <&sleep_clk>;
+&venus {
+	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/qcs6490-audioreach.dtsi b/arch/arm64/boot/dts/qcom/qcs6490-audioreach.dtsi
new file mode 100644
index 000000000000..c1867711298b
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/qcs6490-audioreach.dtsi
@@ -0,0 +1,119 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ *
+ * Common definitions for SC7280-based boards with AudioReach.
+ */
+
+#include <dt-bindings/clock/qcom,lpass-sc7280.h>
+#include <dt-bindings/soc/qcom,gpr.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+
+&lpass_rx_macro {
+	/delete-property/ power-domains;
+	/delete-property/ power-domain-names;
+	clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK  LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&lpass_va_macro>;
+	clock-names = "mclk",
+		      "npl",
+		      "macro",
+		      "dcodec",
+		      "fsgen";
+};
+
+&lpass_tlmm {
+	clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+	clock-names = "core",
+		      "audio";
+};
+
+&lpass_tx_macro {
+	/delete-property/ power-domains;
+	/delete-property/ power-domain-names;
+	clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK  LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&lpass_va_macro>;
+	clock-names = "mclk",
+		      "npl",
+		      "macro",
+		      "dcodec",
+		      "fsgen";
+};
+
+&lpass_va_macro {
+	/delete-property/ power-domains;
+	/delete-property/ power-domain-names;
+	clocks = <&q6prmcc LPASS_CLK_ID_VA_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
+	clock-names = "mclk",
+		      "macro",
+		      "dcodec";
+
+	pinctrl-0 = <&lpass_dmic01_clk>, <&lpass_dmic01_data>,
+		    <&lpass_dmic23_clk>, <&lpass_dmic23_data>;
+	pinctrl-names = "default";
+
+	qcom,dmic-sample-rate = <4800000>;
+};
+
+&lpass_wsa_macro {
+	clocks = <&q6prmcc LPASS_CLK_ID_TX_CORE_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&q6prmcc LPASS_CLK_ID_TX_CORE_NPL_MCLK LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+		 <&lpass_va_macro>;
+	clock-names = "mclk",
+		      "npl",
+		      "macro",
+		      "dcodec",
+		      "fsgen";
+};
+
+&remoteproc_adsp_glink {
+	/delete-node/ apr;
+
+	gpr {
+		compatible = "qcom,gpr";
+		qcom,glink-channels = "adsp_apps";
+		qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+		qcom,intents = <512 20>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		q6apm: service@1 {
+			compatible = "qcom,q6apm";
+			reg = <GPR_APM_MODULE_IID>;
+			#sound-dai-cells = <0>;
+			qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+			q6apmdai: dais {
+				compatible = "qcom,q6apm-dais";
+				iommus = <&apps_smmu 0x1801 0x0>;
+			};
+
+			q6apmbedai: bedais {
+				compatible = "qcom,q6apm-lpass-dais";
+				#sound-dai-cells = <1>;
+			};
+		};
+
+		q6prm: service@2 {
+			compatible = "qcom,q6prm";
+			reg = <GPR_PRM_MODULE_IID>;
+			qcom,protection-domain = "avs/audio", "msm/adsp/audio_pd";
+
+			q6prmcc: clock-controller {
+				compatible = "qcom,q6prm-lpass-clocks";
+				#clock-cells = <2>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
index 5fbcd48f2e2d..18cea8812001 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2.dts
@@ -19,6 +19,7 @@
 #include "pm7325.dtsi"
 #include "pm8350c.dtsi"
 #include "pmk8350.dtsi"
+#include "qcs6490-audioreach.dtsi"
 
 /delete-node/ &ipa_fw_mem;
 /delete-node/ &rmtfs_mem;
@@ -765,6 +766,14 @@
 	};
 };
 
+&lpass_va_macro {
+	status = "okay";
+};
+
+&lpass_wsa_macro {
+	status = "okay";
+};
+
 &mdss {
 	status = "okay";
 };
@@ -811,7 +820,7 @@
 &pcie1 {
 	perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
 
-	pinctrl-0 = <&pcie1_reset_n>, <&pcie1_wake_n>;
+	pinctrl-0 = <&pcie1_reset_n>, <&pcie1_wake_n>, <&pcie1_clkreq_n>;
 	pinctrl-names = "default";
 
 	iommu-map = <0x0 &apps_smmu 0x1c80 0x1>,
@@ -1039,6 +1048,77 @@
 	status = "okay";
 };
 
+&sound {
+	compatible = "qcom,qcs6490-rb3gen2-sndcard";
+	model = "QCS6490-RB3Gen2";
+
+	audio-routing = "SpkrLeft IN", "WSA_SPK1 OUT",
+			"SpkrRight IN", "WSA_SPK2 OUT",
+			"VA DMIC0", "vdd-micb",
+			"VA DMIC1", "vdd-micb",
+			"VA DMIC2", "vdd-micb",
+			"VA DMIC3", "vdd-micb";
+
+	wsa-dai-link {
+		link-name = "WSA Playback";
+
+		codec {
+			sound-dai = <&left_spkr>, <&right_spkr>,
+				    <&swr2 0>, <&lpass_wsa_macro 0>;
+		};
+
+		cpu {
+			sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+
+	va-dai-link {
+		link-name = "VA Capture";
+
+		codec {
+			sound-dai = <&lpass_va_macro 0>;
+		};
+
+		cpu {
+			sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+		};
+
+		platform {
+			sound-dai = <&q6apm>;
+		};
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	left_spkr: speaker@0,1 {
+		compatible = "sdw10217020200";
+		reg = <0 1>;
+		reset-gpios = <&tlmm 158 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		#thermal-sensor-cells = <0>;
+		vdd-supply = <&vreg_l18b_1p8>;
+		qcom,port-mapping = <1 2 3 7>;
+	};
+
+	right_spkr: speaker@0,2 {
+		compatible = "sdw10217020200";
+		reg = <0 2>;
+		reset-gpios = <&tlmm 158 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		#thermal-sensor-cells = <0>;
+		vdd-supply = <&vreg_l18b_1p8>;
+		qcom,port-mapping = <4 5 6 8>;
+	};
+};
+
 &tlmm {
 	gpio-reserved-ranges = <32 2>, /* ADSP */
 			       <48 4>; /* NFC */
@@ -1127,12 +1207,10 @@
 };
 
 &usb_1 {
-	status = "okay";
-};
-
-&usb_1_dwc3 {
 	dr_mode = "otg";
 	usb-role-switch;
+
+	status = "okay";
 };
 
 &usb_1_dwc3_hs {
diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
index 8c166ead912c..cabb3f508704 100644
--- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
+++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts
@@ -17,6 +17,7 @@
 
 	aliases {
 		serial0 = &uart7;
+		mmc0 = &sdhc_1;
 	};
 
 	chosen {
@@ -295,6 +296,14 @@
 	};
 };
 
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/qcs8300/a623_zap.mbn";
+};
+
 &pmm8650au_1_gpios {
 	usb2_en: usb2-en-state {
 		pins = "gpio7";
@@ -332,6 +341,26 @@
 	status = "okay";
 };
 
+&sdhc_1 {
+	pinctrl-0 = <&sdc1_state_on>;
+	pinctrl-1 = <&sdc1_state_off>;
+	pinctrl-names = "default", "sleep";
+
+	bus-width = <8>;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	vmmc-supply = <&vreg_l8a>;
+	vqmmc-supply = <&vreg_s4a>;
+
+	non-removable;
+	no-sd;
+	no-sdio;
+
+	status = "okay";
+};
+
 &tlmm {
 	ethernet0_default: ethernet0-default-state {
 		ethernet0_mdc: ethernet0-mdc-pins {
@@ -393,17 +422,13 @@
 };
 
 &usb_1 {
-	status = "okay";
-};
-
-&usb_1_dwc3 {
 	dr_mode = "peripheral";
-};
 
-&usb_2 {
 	status = "okay";
 };
 
-&usb_2_dwc3 {
+&usb_2 {
 	dr_mode = "host";
+
+	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/qcs8300.dtsi b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
index 7ada029c32c1..8d78ccac411e 100644
--- a/arch/arm64/boot/dts/qcom/qcs8300.dtsi
+++ b/arch/arm64/boot/dts/qcom/qcs8300.dtsi
@@ -12,11 +12,13 @@
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/firmware/qcom,scm.h>
 #include <dt-bindings/interconnect/qcom,icc.h>
+#include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,qcs8300-rpmh.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/mailbox/qcom-ipcc.h>
 #include <dt-bindings/power/qcom,rpmhpd.h>
 #include <dt-bindings/power/qcom-rpmpd.h>
+#include <dt-bindings/soc/qcom,gpr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 
 / {
@@ -53,6 +55,11 @@
 			capacity-dmips-mhz = <1946>;
 			dynamic-power-coefficient = <472>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3_cl0 MASTER_EPSS_L3_APPS
+					 &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>;
 
 			l2_0: l2-cache {
 				compatible = "cache";
@@ -73,6 +80,11 @@
 			capacity-dmips-mhz = <1946>;
 			dynamic-power-coefficient = <472>;
 			qcom,freq-domain = <&cpufreq_hw 0>;
+			operating-points-v2 = <&cpu0_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3_cl0 MASTER_EPSS_L3_APPS
+					 &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>;
 
 			l2_1: l2-cache {
 				compatible = "cache";
@@ -93,6 +105,11 @@
 			capacity-dmips-mhz = <1946>;
 			dynamic-power-coefficient = <507>;
 			qcom,freq-domain = <&cpufreq_hw 2>;
+			operating-points-v2 = <&cpu2_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3_cl0 MASTER_EPSS_L3_APPS
+					 &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>;
 
 			l2_2: l2-cache {
 				compatible = "cache";
@@ -113,6 +130,11 @@
 			capacity-dmips-mhz = <1946>;
 			dynamic-power-coefficient = <507>;
 			qcom,freq-domain = <&cpufreq_hw 2>;
+			operating-points-v2 = <&cpu2_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3_cl0 MASTER_EPSS_L3_APPS
+					 &epss_l3_cl0 SLAVE_EPSS_L3_SHARED>;
 
 			l2_3: l2-cache {
 				compatible = "cache";
@@ -133,6 +155,11 @@
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3_cl1 MASTER_EPSS_L3_APPS
+					 &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>;
 
 			l2_4: l2-cache {
 				compatible = "cache";
@@ -153,6 +180,11 @@
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3_cl1 MASTER_EPSS_L3_APPS
+					 &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>;
 
 			l2_5: l2-cache {
 				compatible = "cache";
@@ -173,6 +205,11 @@
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3_cl1 MASTER_EPSS_L3_APPS
+					 &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>;
 
 			l2_6: l2-cache {
 				compatible = "cache";
@@ -193,6 +230,11 @@
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			qcom,freq-domain = <&cpufreq_hw 1>;
+			operating-points-v2 = <&cpu4_opp_table>;
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&epss_l3_cl1 MASTER_EPSS_L3_APPS
+					 &epss_l3_cl1 SLAVE_EPSS_L3_SHARED>;
 
 			l2_7: l2-cache {
 				compatible = "cache";
@@ -323,6 +365,248 @@
 		};
 	};
 
+	cpu0_opp_table: opp-table-cpu0 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-902400000 {
+			opp-hz = /bits/ 64 <902400000>;
+			opp-peak-kBps = <(681600 * 4) (921600 * 32)>;
+		};
+
+		opp-1017600000 {
+			opp-hz = /bits/ 64 <1017600000>;
+			opp-peak-kBps = <(1017600 * 4) (921600 * 32)>;
+		};
+
+		opp-1190400000 {
+			opp-hz = /bits/ 64 <1190400000>;
+			opp-peak-kBps = <(1708800 * 4) (921600 * 32)>;
+		};
+
+		opp-1267200000 {
+			opp-hz = /bits/ 64 <1267200000>;
+			opp-peak-kBps = <(2092800 * 4) (998400 * 32)>;
+		};
+
+		opp-1344000000 {
+			opp-hz = /bits/ 64 <1344000000>;
+			opp-peak-kBps = <(2092800 * 4) (1075200 * 32)>;
+		};
+
+		opp-1420800000 {
+			opp-hz = /bits/ 64 <1420800000>;
+			opp-peak-kBps = <(2092800 * 4) (1152000 * 32)>;
+		};
+
+		opp-1497600000 {
+			opp-hz = /bits/ 64 <1497600000>;
+			opp-peak-kBps = <(2092800 * 4) (1228800 * 32)>;
+		};
+
+		opp-1574400000 {
+			opp-hz = /bits/ 64 <1574400000>;
+			opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>;
+		};
+
+		opp-1670400000 {
+			opp-hz = /bits/ 64 <1670400000>;
+			opp-peak-kBps = <(2736000 * 4) (1401600 * 32)>;
+		};
+
+		opp-1747200000 {
+			opp-hz = /bits/ 64 <1747200000>;
+			opp-peak-kBps = <(2736000 * 4) (1401600 * 32)>;
+		};
+
+		opp-1824000000 {
+			opp-hz = /bits/ 64 <1824000000>;
+			opp-peak-kBps = <(2736000 * 4) (1478400 * 32)>;
+		};
+
+		opp-1900800000 {
+			opp-hz = /bits/ 64 <1900800000>;
+			opp-peak-kBps = <(2736000 * 4) (1478400 * 32)>;
+		};
+
+		opp-1977600000 {
+			opp-hz = /bits/ 64 <1977600000>;
+			opp-peak-kBps = <(3196800 * 4) (1555200 * 32)>;
+		};
+
+		opp-2054400000 {
+			opp-hz = /bits/ 64 <2054400000>;
+			opp-peak-kBps = <(3196800 * 4) (1555200 * 32)>;
+		};
+
+		opp-2112000000 {
+			opp-hz = /bits/ 64 <2112000000>;
+			opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>;
+		};
+
+	};
+
+	cpu2_opp_table: opp-table-cpu2 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-940800000 {
+			opp-hz = /bits/ 64 <940800000>;
+			opp-peak-kBps = <(681600 * 4) (921600 * 32)>;
+		};
+
+		opp-1094400000 {
+			opp-hz = /bits/ 64 <1094400000>;
+			opp-peak-kBps = <(1017600 * 4) (921600 * 32)>;
+		};
+
+		opp-1267200000 {
+			opp-hz = /bits/ 64 <1267200000>;
+			opp-peak-kBps = <(1708800 * 4) (921600 * 32)>;
+		};
+
+		opp-1344000000 {
+			opp-hz = /bits/ 64 <1344000000>;
+			opp-peak-kBps = <(2092800 * 4) (998400 * 32)>;
+		};
+
+		opp-1420800000 {
+			opp-hz = /bits/ 64 <1420800000>;
+			opp-peak-kBps = <(2092800 * 4) (998400 * 32)>;
+		};
+
+		opp-1497600000 {
+			opp-hz = /bits/ 64 <1497600000>;
+			opp-peak-kBps = <(2092800 * 4) (1075200 * 32)>;
+		};
+
+		opp-1574400000 {
+			opp-hz = /bits/ 64 <1574400000>;
+			opp-peak-kBps = <(2092800 * 4) (1152000 * 32)>;
+		};
+
+		opp-1632000000 {
+			opp-hz = /bits/ 64 <1632000000>;
+			opp-peak-kBps = <(2092800 * 4) (1228800 * 32)>;
+		};
+
+		opp-1708800000 {
+			opp-hz = /bits/ 64 <1708800000>;
+			opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>;
+		};
+
+		opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>;
+		};
+
+		opp-1900800000 {
+			opp-hz = /bits/ 64 <1900800000>;
+			opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>;
+		};
+
+		opp-1977600000 {
+			opp-hz = /bits/ 64 <1977600000>;
+			opp-peak-kBps = <(2736000 * 4) (1401600 * 32)>;
+		};
+
+		opp-2054400000 {
+			opp-hz = /bits/ 64 <2054400000>;
+			opp-peak-kBps = <(2736000 * 4) (1478400 * 32)>;
+		};
+
+		opp-2131200000 {
+			opp-hz = /bits/ 64 <2131200000>;
+			opp-peak-kBps = <(3196800 * 4) (1555200 * 32)>;
+		};
+
+		opp-2208000000 {
+			opp-hz = /bits/ 64 <2208000000>;
+			opp-peak-kBps = <(3196800 * 4) (1555200 * 32)>;
+		};
+
+		opp-2284800000 {
+			opp-hz = /bits/ 64 <2284800000>;
+			opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>;
+		};
+
+		opp-2361600000 {
+			opp-hz = /bits/ 64 <2361600000>;
+			opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>;
+		};
+
+	};
+
+	cpu4_opp_table: opp-table-cpu4 {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-844800000 {
+			opp-hz = /bits/ 64 <844800000>;
+			opp-peak-kBps = <(681600 * 4) (921600 * 32)>;
+		};
+
+		opp-1113600000 {
+			opp-hz = /bits/ 64 <1113600000>;
+			opp-peak-kBps = <(1708800 * 4) (921600 * 32)>;
+		};
+
+		opp-1209600000 {
+			opp-hz = /bits/ 64 <1209600000>;
+			opp-peak-kBps = <(2092800 * 4) (998400 * 32)>;
+		};
+
+		opp-1305600000 {
+			opp-hz = /bits/ 64 <1305600000>;
+			opp-peak-kBps = <(2092800 * 4) (1075200 * 32)>;
+		};
+
+		opp-1382400000 {
+			opp-hz = /bits/ 64 <1382400000>;
+			opp-peak-kBps = <(2092800 * 4) (1152000 * 32)>;
+		};
+
+		opp-1459200000 {
+			opp-hz = /bits/ 64 <1459200000>;
+			opp-peak-kBps = <(2092800 * 4) (1228800 * 32)>;
+		};
+
+		opp-1497600000 {
+			opp-hz = /bits/ 64 <1497600000>;
+			opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>;
+		};
+
+		opp-1574400000 {
+			opp-hz = /bits/ 64 <1574400000>;
+			opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>;
+		};
+
+		opp-1651200000 {
+			opp-hz = /bits/ 64 <1651200000>;
+			opp-peak-kBps = <(2736000 * 4) (1324800 * 32)>;
+		};
+
+		opp-1728000000 {
+			opp-hz = /bits/ 64 <1728000000>;
+			opp-peak-kBps = <(2736000 * 4) (1401600 * 32)>;
+		};
+
+		opp-1804800000 {
+			opp-hz = /bits/ 64 <1804800000>;
+			opp-peak-kBps = <(2736000 * 4) (1478400 * 32)>;
+		};
+
+		opp-1881600000 {
+			opp-hz = /bits/ 64 <1881600000>;
+			opp-peak-kBps = <(3196800 * 4) (1555200 * 32)>;
+		};
+
+		opp-1958400000 {
+			opp-hz = /bits/ 64 <1958400000>;
+			opp-peak-kBps = <(3196800 * 4) (1612800 * 32)>;
+		};
+	};
+
 	dummy_eud: dummy-sink {
 		compatible = "arm,coresight-dummy-sink";
 
@@ -640,9 +924,14 @@
 
 		qfprom: efuse@784000 {
 			compatible = "qcom,qcs8300-qfprom", "qcom,qfprom";
-			reg = <0x0 0x00784000 0x0 0x1200>;
+			reg = <0x0 0x00784000 0x0 0x2410>;
 			#address-cells = <1>;
 			#size-cells = <1>;
+
+			gpu_speed_bin: gpu_speed_bin@240c {
+				reg = <0x240c 0x1>;
+				bits = <0 8>;
+			};
 		};
 
 		gpi_dma0: dma-controller@900000 {
@@ -817,7 +1106,7 @@
 					    <&qup_uart1_tx>, <&qup_uart1_rx>;
 				pinctrl-names = "default";
 				interrupts = <GIC_SPI 551 IRQ_TYPE_LEVEL_HIGH>;
-				interconnects =	<&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
 						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>;
@@ -984,7 +1273,7 @@
 				interrupts = <GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects =	<&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
 						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
@@ -1057,7 +1346,7 @@
 				interrupts = <GIC_SPI 535 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects =	<&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
 						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
@@ -1130,7 +1419,7 @@
 				interrupts = <GIC_SPI 536 IRQ_TYPE_LEVEL_HIGH>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				interconnects =	<&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
+				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
 						 &config_noc SLAVE_QUP_0 QCOM_ICC_TAG_ALWAYS>,
@@ -2144,6 +2433,45 @@
 						dma-coherent;
 					};
 				};
+
+				gpr {
+					compatible = "qcom,gpr";
+					qcom,glink-channels = "adsp_apps";
+					qcom,domain = <GPR_DOMAIN_ID_ADSP>;
+					qcom,intents = <512 20>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					q6apm: service@1 {
+						compatible = "qcom,q6apm";
+						reg = <GPR_APM_MODULE_IID>;
+						#sound-dai-cells = <0>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6apmbedai: bedais {
+							compatible = "qcom,q6apm-lpass-dais";
+							#sound-dai-cells = <1>;
+						};
+
+						q6apmdai: dais {
+							compatible = "qcom,q6apm-dais";
+							iommus = <&apps_smmu 0x2001 0x0>;
+						};
+					};
+
+					q6prm: service@2 {
+						compatible = "qcom,q6prm";
+						reg = <GPR_PRM_MODULE_IID>;
+						qcom,protection-domain = "avs/audio",
+									 "msm/adsp/audio_pd";
+
+						q6prmcc: clock-controller {
+							compatible = "qcom,q6prm-lpass-clocks";
+							#clock-cells = <2>;
+						};
+					};
+				};
 			};
 		};
 
@@ -3837,6 +4165,69 @@
 			clock-names = "apb_pclk";
 		};
 
+		sdhc_1: mmc@87c4000 {
+			compatible = "qcom,qcs8300-sdhci", "qcom,sdhci-msm-v5";
+			reg = <0x0 0x087c4000 0x0 0x1000>,
+			      <0x0 0x087c5000 0x0 0x1000>;
+			reg-names = "hc",
+				    "cqhci";
+
+			interrupts = <GIC_SPI 383 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 521 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hc_irq",
+					  "pwr_irq";
+
+			clocks = <&gcc GCC_SDCC1_AHB_CLK>,
+				 <&gcc GCC_SDCC1_APPS_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface",
+				      "core",
+				      "xo";
+
+			resets = <&gcc GCC_SDCC1_BCR>;
+
+			power-domains = <&rpmhpd RPMHPD_CX>;
+			operating-points-v2 = <&sdhc1_opp_table>;
+			iommus = <&apps_smmu 0x0 0x0>;
+			interconnects = <&aggre1_noc MASTER_SDC QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_SDC1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "sdhc-ddr",
+					     "cpu-sdhc";
+
+			qcom,dll-config = <0x000f64ee>;
+			qcom,ddr-config = <0x80040868>;
+			supports-cqe;
+			dma-coherent;
+
+			status = "disabled";
+
+			sdhc1_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-50000000 {
+					opp-hz = /bits/ 64 <50000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-100000000 {
+					opp-hz = /bits/ 64 <100000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-200000000 {
+					opp-hz = /bits/ 64 <200000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-384000000 {
+					opp-hz = /bits/ 64 <384000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+			};
+		};
+
 		usb_1_hsphy: phy@8904000 {
 			compatible = "qcom,qcs8300-usb-hs-phy",
 				     "qcom,usb-snps-hs-7nm-phy";
@@ -3903,6 +4294,104 @@
 			status = "disabled";
 		};
 
+		gpu: gpu@3d00000 {
+			compatible = "qcom,adreno-623.0", "qcom,adreno";
+			reg = <0x0 0x03d00000 0x0 0x40000>,
+			      <0x0 0x03d9e000 0x0 0x1000>,
+			      <0x0 0x03d61000 0x0 0x800>;
+			reg-names = "kgsl_3d0_reg_memory",
+				    "cx_mem",
+				    "cx_dbgc";
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			iommus = <&adreno_smmu 0 0xc00>,
+				 <&adreno_smmu 1 0xc00>;
+			operating-points-v2 = <&gpu_opp_table>;
+			qcom,gmu = <&gmu>;
+			interconnects = <&gem_noc MASTER_GFX3D QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "gfx-mem";
+			#cooling-cells = <2>;
+
+			nvmem-cells = <&gpu_speed_bin>;
+			nvmem-cell-names = "speed_bin";
+
+			status = "disabled";
+
+			gpu_zap_shader: zap-shader {
+				memory-region = <&gpu_microcode_mem>;
+			};
+
+			gpu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-877000000 {
+					opp-hz = /bits/ 64 <877000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					opp-peak-kBps = <12484375>;
+					opp-supported-hw = <0x1>;
+				};
+
+				opp-780000000 {
+					opp-hz = /bits/ 64 <780000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+					opp-peak-kBps = <10687500>;
+					opp-supported-hw = <0x1>;
+				};
+
+				opp-599000000 {
+					opp-hz = /bits/ 64 <599000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+					opp-peak-kBps = <8171875>;
+					opp-supported-hw = <0x3>;
+				};
+
+				opp-479000000 {
+					opp-hz = /bits/ 64 <479000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-peak-kBps = <5285156>;
+					opp-supported-hw = <0x3>;
+				};
+			};
+		};
+
+		gmu: gmu@3d6a000 {
+			compatible = "qcom,adreno-gmu-623.0", "qcom,adreno-gmu";
+			reg = <0x0 0x03d6a000 0x0 0x34000>,
+			      <0x0 0x03de0000 0x0 0x10000>,
+			      <0x0 0x0b290000 0x0 0x10000>;
+			reg-names = "gmu", "rscc", "gmu_pdc";
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "hfi", "gmu";
+			clocks = <&gpucc GPU_CC_CX_GMU_CLK>,
+				 <&gpucc GPU_CC_CXO_CLK>,
+				 <&gcc GCC_DDRSS_GPU_AXI_CLK>,
+				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
+				 <&gpucc GPU_CC_AHB_CLK>,
+				 <&gpucc GPU_CC_HUB_CX_INT_CLK>;
+			clock-names = "gmu",
+				      "cxo",
+				      "axi",
+				      "memnoc",
+				      "ahb",
+				      "hub";
+			power-domains = <&gpucc GPU_CC_CX_GDSC>,
+					<&gpucc GPU_CC_GX_GDSC>;
+			power-domain-names = "cx",
+					     "gx";
+			iommus = <&adreno_smmu 5 0xc00>;
+			operating-points-v2 = <&gmu_opp_table>;
+
+			gmu_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-500000000 {
+					opp-hz = /bits/ 64 <500000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				};
+			};
+		};
+
 		gpucc: clock-controller@3d90000 {
 			compatible = "qcom,qcs8300-gpucc";
 			reg = <0x0 0x03d90000 0x0 0xa000>;
@@ -4081,9 +4570,9 @@
 			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
-		usb_1: usb@a6f8800 {
-			compatible = "qcom,qcs8300-dwc3", "qcom,dwc3";
-			reg = <0x0 0x0a6f8800 0x0 0x400>;
+		usb_1: usb@a600000 {
+			compatible = "qcom,qcs8300-dwc3", "qcom,snps-dwc3";
+			reg = <0x0 0x0a600000 0x0 0xfc100>;
 
 			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
 				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
@@ -4100,12 +4589,14 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 287 IRQ_TYPE_LEVEL_HIGH>,
 					      <&intc GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 12 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "pwr_event",
+			interrupt-names = "dwc_usb3",
+					  "pwr_event",
 					  "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
@@ -4121,32 +4612,23 @@
 					 &config_noc SLAVE_USB3_0 QCOM_ICC_TAG_ALWAYS>;
 			interconnect-names = "usb-ddr", "apps-usb";
 
-			wakeup-source;
+			iommus = <&apps_smmu 0x80 0x0>;
+			phys = <&usb_1_hsphy>, <&usb_qmpphy>;
+			phy-names = "usb2-phy", "usb3-phy";
+			snps,dis_enblslpm_quirk;
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
+			snps,dis_u2_susphy_quirk;
+			snps,dis_u3_susphy_quirk;
 
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			wakeup-source;
 
 			status = "disabled";
-
-			usb_1_dwc3: usb@a600000 {
-				compatible = "snps,dwc3";
-				reg = <0x0 0x0a600000 0x0 0xe000>;
-				interrupts = <GIC_SPI 292 IRQ_TYPE_LEVEL_HIGH>;
-				iommus = <&apps_smmu 0x80 0x0>;
-				phys = <&usb_1_hsphy>, <&usb_qmpphy>;
-				phy-names = "usb2-phy", "usb3-phy";
-				snps,dis_enblslpm_quirk;
-				snps,dis-u1-entry-quirk;
-				snps,dis-u2-entry-quirk;
-				snps,dis_u2_susphy_quirk;
-				snps,dis_u3_susphy_quirk;
-			};
 		};
 
-		usb_2: usb@a4f8800 {
-			compatible = "qcom,qcs8300-dwc3", "qcom,dwc3";
-			reg = <0x0 0x0a4f8800 0x0 0x400>;
+		usb_2: usb@a400000 {
+			compatible = "qcom,qcs8300-dwc3", "qcom,snps-dwc3";
+			reg = <0x0 0x0a400000 0x0 0xfc100>;
 
 			clocks = <&gcc GCC_CFG_NOC_USB2_PRIM_AXI_CLK>,
 				 <&gcc GCC_USB20_MASTER_CLK>,
@@ -4163,11 +4645,13 @@
 					  <&gcc GCC_USB20_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <120000000>;
 
-			interrupts-extended = <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 444 IRQ_TYPE_LEVEL_HIGH>,
 					      <&intc GIC_SPI 443 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 10 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 9 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "pwr_event",
+			interrupt-names = "dwc_usb3",
+					  "pwr_event",
 					  "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq";
@@ -4183,32 +4667,22 @@
 					 &config_noc SLAVE_USB2 QCOM_ICC_TAG_ALWAYS>;
 			interconnect-names = "usb-ddr", "apps-usb";
 
-			qcom,select-utmi-as-pipe-clk;
-			wakeup-source;
+			iommus = <&apps_smmu 0x20 0x0>;
 
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+			phys = <&usb_2_hsphy>;
+			phy-names = "usb2-phy";
+			maximum-speed = "high-speed";
 
-			status = "disabled";
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
+			snps,dis_u2_susphy_quirk;
+			snps,dis_u3_susphy_quirk;
+			snps,dis_enblslpm_quirk;
 
-			usb_2_dwc3: usb@a400000 {
-				compatible = "snps,dwc3";
-				reg = <0x0 0x0a400000 0x0 0xe000>;
-
-				interrupts = <GIC_SPI 442 IRQ_TYPE_LEVEL_HIGH>;
-				iommus = <&apps_smmu 0x20 0x0>;
-
-				phys = <&usb_2_hsphy>;
-				phy-names = "usb2-phy";
-				maximum-speed = "high-speed";
+			qcom,select-utmi-as-pipe-clk;
+			wakeup-source;
 
-				snps,dis-u1-entry-quirk;
-				snps,dis-u2-entry-quirk;
-				snps,dis_u2_susphy_quirk;
-				snps,dis_u3_susphy_quirk;
-				snps,dis_enblslpm_quirk;
-			};
+			status = "disabled";
 		};
 
 		iris: video-codec@aa00000 {
@@ -4418,6 +4892,43 @@
 			#interrupt-cells = <2>;
 			wakeup-parent = <&pdc>;
 
+			hs0_mi2s_active: hs0-mi2s-active-state {
+				pins = "gpio106", "gpio107", "gpio108", "gpio109";
+				function = "hs0_mi2s";
+				drive-strength = <8>;
+				bias-disable;
+			};
+
+			mi2s1_active: mi2s1-active-state {
+				data0-pins {
+					pins = "gpio100";
+					function = "mi2s1_data0";
+					drive-strength = <8>;
+					bias-disable;
+				};
+
+				data1-pins {
+					pins = "gpio101";
+					function = "mi2s1_data1";
+					drive-strength = <8>;
+					bias-disable;
+				};
+
+				sclk-pins {
+					pins = "gpio98";
+					function = "mi2s1_sck";
+					drive-strength = <8>;
+					bias-disable;
+				};
+
+				ws-pins {
+					pins = "gpio99";
+					function = "mi2s1_ws";
+					drive-strength = <8>;
+					bias-disable;
+				};
+			};
+
 			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
 				pins = "gpio17", "gpio18";
 				function = "qup0_se0";
@@ -5042,6 +5553,56 @@
 				pins = "gpio13";
 				function = "qup2_se0";
 			};
+
+			sdc1_state_on: sdc1-on-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <16>;
+					bias-disable;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <10>;
+					bias-pull-up;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-pull-down;
+				};
+			};
+
+			sdc1_state_off: sdc1-off-state {
+				clk-pins {
+					pins = "sdc1_clk";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+
+				cmd-pins {
+					pins = "sdc1_cmd";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+
+				data-pins {
+					pins = "sdc1_data";
+					drive-strength = <2>;
+					bias-bus-hold;
+				};
+
+				rclk-pins {
+					pins = "sdc1_rclk";
+					bias-bus-hold;
+				};
+			};
 		};
 
 		sram: sram@146d8000 {
@@ -5433,6 +5994,15 @@
 			};
 		};
 
+		epss_l3_cl0: interconnect@18590000 {
+			compatible = "qcom,qcs8300-epss-l3", "qcom,sa8775p-epss-l3",
+				     "qcom,epss-l3";
+			reg = <0x0 0x18590000 0x0 0x1000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+			#interconnect-cells = <1>;
+		};
+
 		cpufreq_hw: cpufreq@18591000 {
 			compatible = "qcom,qcs8300-cpufreq-epss", "qcom,cpufreq-epss";
 			reg = <0x0 0x18591000 0x0 0x1000>,
@@ -5455,6 +6025,15 @@
 			#freq-domain-cells = <1>;
 		};
 
+		epss_l3_cl1: interconnect@18592000 {
+			compatible = "qcom,qcs8300-epss-l3", "qcom,sa8775p-epss-l3",
+				     "qcom,epss-l3";
+			reg = <0x0 0x18592000 0x0 0x1000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_GPLL0>;
+			clock-names = "xo", "alternate";
+			#interconnect-cells = <1>;
+		};
+
 		remoteproc_gpdsp: remoteproc@20c00000 {
 			compatible = "qcom,qcs8300-gpdsp-pas", "qcom,sa8775p-gpdsp0-pas";
 			reg = <0x0 0x20c00000 0x0 0x10000>;
diff --git a/arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dts b/arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dts
index 759d1ec694b2..7fc2de0d3d5e 100644
--- a/arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dts
+++ b/arch/arm64/boot/dts/qcom/qcs9100-ride-r3.dts
@@ -4,8 +4,13 @@
  */
 /dts-v1/;
 
-#include "sa8775p-ride-r3.dts"
+#include "lemans.dtsi"
+#include "lemans-pmics.dtsi"
+
+#include "lemans-ride-common.dtsi"
+#include "lemans-ride-ethernet-aqr115c.dtsi"
+
 / {
-	model = "Qualcomm QCS9100 Ride Rev3";
+	model = "Qualcomm Technologies, Inc. Lemans Ride Rev3";
 	compatible = "qcom,qcs9100-ride-r3", "qcom,qcs9100", "qcom,sa8775p";
 };
diff --git a/arch/arm64/boot/dts/qcom/qcs9100-ride.dts b/arch/arm64/boot/dts/qcom/qcs9100-ride.dts
index 979462dfec30..b0c5fdde56ae 100644
--- a/arch/arm64/boot/dts/qcom/qcs9100-ride.dts
+++ b/arch/arm64/boot/dts/qcom/qcs9100-ride.dts
@@ -4,8 +4,13 @@
  */
 /dts-v1/;
 
-#include "sa8775p-ride.dts"
+#include "lemans.dtsi"
+#include "lemans-pmics.dtsi"
+
+#include "lemans-ride-common.dtsi"
+#include "lemans-ride-ethernet-88ea1512.dtsi"
+
 / {
-	model = "Qualcomm QCS9100 Ride";
+	model = "Qualcomm Technologies, Inc. Lemans Ride";
 	compatible = "qcom,qcs9100-ride", "qcom,qcs9100", "qcom,sa8775p";
 };
diff --git a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
index b2e0fc5501c1..67ba508e92ba 100644
--- a/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
+++ b/arch/arm64/boot/dts/qcom/qrb2210-rb1.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/leds/common.h>
 #include "qcm2290.dtsi"
 #include "pm4125.dtsi"
@@ -63,8 +64,8 @@
 	i2c2_gpio: i2c {
 		compatible = "i2c-gpio";
 
-		sda-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
-		scl-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+		sda-gpios = <&tlmm 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
@@ -698,6 +699,10 @@
 	remote-endpoint = <&pm4125_ss_in>;
 };
 
+&venus {
+	status = "okay";
+};
+
 &wifi {
 	vdd-0.8-cx-mx-supply = <&pm4125_l7>;
 	vdd-1.8-xo-supply = <&pm4125_l13>;
diff --git a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
index a37860175d27..bdf2d66e40c6 100644
--- a/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
+++ b/arch/arm64/boot/dts/qcom/qrb4210-rb2.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/sound/qcom,q6afe.h>
 #include <dt-bindings/sound/qcom,q6asm.h>
@@ -65,8 +66,8 @@
 	i2c2_gpio: i2c {
 		compatible = "i2c-gpio";
 
-		sda-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
-		scl-gpios = <&tlmm 7 GPIO_ACTIVE_HIGH>;
+		sda-gpios = <&tlmm 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		#address-cells = <1>;
 		#size-cells = <0>;
 
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index 33ecbc81997c..d99448a0732d 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -725,15 +725,11 @@
 	qcom,dual-dsi-mode;
 	qcom,master-dsi;
 #endif
+};
 
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&lt9611_a>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
+&mdss_dsi0_out {
+	remote-endpoint = <&lt9611_a>;
+	data-lanes = <0 1 2 3>;
 };
 
 &mdss_dsi0_phy {
diff --git a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
index 2fd1dafe63ce..64e59299672c 100644
--- a/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
+++ b/arch/arm64/boot/dts/qcom/sa8295p-adp.dts
@@ -35,7 +35,7 @@
 
 		port {
 			dp2_connector_in: endpoint {
-				remote-endpoint = <&mdss1_dp0_phy_out>;
+				remote-endpoint = <&mdss1_dp0_out>;
 			};
 		};
 	};
@@ -49,7 +49,7 @@
 
 		port {
 			dp3_connector_in: endpoint {
-				remote-endpoint = <&mdss1_dp1_phy_out>;
+				remote-endpoint = <&mdss1_dp1_out>;
 			};
 		};
 	};
@@ -63,7 +63,7 @@
 
 		port {
 			edp0_connector_in: endpoint {
-				remote-endpoint = <&mdss0_dp2_phy_out>;
+				remote-endpoint = <&mdss0_dp2_out>;
 			};
 		};
 	};
@@ -77,7 +77,7 @@
 
 		port {
 			edp1_connector_in: endpoint {
-				remote-endpoint = <&mdss0_dp3_phy_out>;
+				remote-endpoint = <&mdss0_dp3_out>;
 			};
 		};
 	};
@@ -91,7 +91,7 @@
 
 		port {
 			edp2_connector_in: endpoint {
-				remote-endpoint = <&mdss1_dp2_phy_out>;
+				remote-endpoint = <&mdss1_dp2_out>;
 			};
 		};
 	};
@@ -105,7 +105,7 @@
 
 		port {
 			edp3_connector_in: endpoint {
-				remote-endpoint = <&mdss1_dp3_phy_out>;
+				remote-endpoint = <&mdss1_dp3_out>;
 			};
 		};
 	};
@@ -361,18 +361,12 @@
 };
 
 &mdss0_dp2 {
-	data-lanes = <0 1 2 3>;
-
 	status = "okay";
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-			mdss0_dp2_phy_out: endpoint {
-				remote-endpoint = <&edp0_connector_in>;
-			};
-		};
-	};
+&mdss0_dp2_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&edp0_connector_in>;
 };
 
 &mdss0_dp2_phy {
@@ -383,18 +377,12 @@
 };
 
 &mdss0_dp3 {
-	data-lanes = <0 1 2 3>;
-
 	status = "okay";
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-			mdss0_dp3_phy_out: endpoint {
-				remote-endpoint = <&edp1_connector_in>;
-			};
-		};
-	};
+&mdss0_dp3_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&edp1_connector_in>;
 };
 
 &mdss0_dp3_phy {
@@ -409,18 +397,12 @@
 };
 
 &mdss1_dp0 {
-	data-lanes = <0 1 2 3>;
-
 	status = "okay";
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-			mdss1_dp0_phy_out: endpoint {
-				remote-endpoint = <&dp2_connector_in>;
-			};
-		};
-	};
+&mdss1_dp0_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&dp2_connector_in>;
 };
 
 &mdss1_dp0_phy {
@@ -431,18 +413,12 @@
 };
 
 &mdss1_dp1 {
-	data-lanes = <0 1 2 3>;
-
 	status = "okay";
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-			mdss1_dp1_phy_out: endpoint {
-				remote-endpoint = <&dp3_connector_in>;
-			};
-		};
-	};
+&mdss1_dp1_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&dp3_connector_in>;
 };
 
 &mdss1_dp1_phy {
@@ -453,18 +429,12 @@
 };
 
 &mdss1_dp2 {
-	data-lanes = <0 1 2 3>;
-
 	status = "okay";
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-			mdss1_dp2_phy_out: endpoint {
-				remote-endpoint = <&edp2_connector_in>;
-			};
-		};
-	};
+&mdss1_dp2_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&edp2_connector_in>;
 };
 
 &mdss1_dp2_phy {
@@ -475,18 +445,12 @@
 };
 
 &mdss1_dp3 {
-	data-lanes = <0 1 2 3>;
-
 	status = "okay";
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-			mdss1_dp3_phy_out: endpoint {
-				remote-endpoint = <&edp3_connector_in>;
-			};
-		};
-	};
+&mdss1_dp3_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&edp3_connector_in>;
 };
 
 &mdss1_dp3_phy {
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dts
index ae065ae92478..b25f0b2c9410 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dts
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride-r3.dts
@@ -5,43 +5,13 @@
 
 /dts-v1/;
 
-#include "sa8775p-ride.dtsi"
+#include "lemans-auto.dtsi"
+
+#include "lemans-pmics.dtsi"
+#include "lemans-ride-common.dtsi"
+#include "lemans-ride-ethernet-aqr115c.dtsi"
 
 / {
 	model = "Qualcomm SA8775P Ride Rev3";
 	compatible = "qcom,sa8775p-ride-r3", "qcom,sa8775p";
 };
-
-&ethernet0 {
-	phy-mode = "2500base-x";
-};
-
-&ethernet1 {
-	phy-mode = "2500base-x";
-};
-
-&mdio {
-	compatible = "snps,dwmac-mdio";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	sgmii_phy0: phy@8 {
-		compatible = "ethernet-phy-id31c3.1c33";
-		reg = <0x8>;
-		device_type = "ethernet-phy";
-		interrupts-extended = <&tlmm 7 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
-		reset-assert-us = <11000>;
-		reset-deassert-us = <70000>;
-	};
-
-	sgmii_phy1: phy@0 {
-		compatible = "ethernet-phy-id31c3.1c33";
-		reg = <0x0>;
-		device_type = "ethernet-phy";
-		interrupts-extended = <&tlmm 26 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>;
-		reset-assert-us = <11000>;
-		reset-deassert-us = <70000>;
-	};
-};
diff --git a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
index 2e87fd760dbd..2d9028cd60be 100644
--- a/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
+++ b/arch/arm64/boot/dts/qcom/sa8775p-ride.dts
@@ -5,43 +5,13 @@
 
 /dts-v1/;
 
-#include "sa8775p-ride.dtsi"
+#include "lemans-auto.dtsi"
+
+#include "lemans-pmics.dtsi"
+#include "lemans-ride-common.dtsi"
+#include "lemans-ride-ethernet-88ea1512.dtsi"
 
 / {
 	model = "Qualcomm SA8775P Ride";
 	compatible = "qcom,sa8775p-ride", "qcom,sa8775p";
 };
-
-&ethernet0 {
-	phy-mode = "sgmii";
-};
-
-&ethernet1 {
-	phy-mode = "sgmii";
-};
-
-&mdio {
-	compatible = "snps,dwmac-mdio";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	sgmii_phy0: phy@8 {
-		compatible = "ethernet-phy-id0141.0dd4";
-		reg = <0x8>;
-		device_type = "ethernet-phy";
-		interrupts-extended = <&tlmm 7 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&pmm8654au_2_gpios 8 GPIO_ACTIVE_LOW>;
-		reset-assert-us = <11000>;
-		reset-deassert-us = <70000>;
-	};
-
-	sgmii_phy1: phy@a {
-		compatible = "ethernet-phy-id0141.0dd4";
-		reg = <0xa>;
-		device_type = "ethernet-phy";
-		interrupts-extended = <&tlmm 26 IRQ_TYPE_EDGE_FALLING>;
-		reset-gpios = <&pmm8654au_2_gpios 9 GPIO_ACTIVE_LOW>;
-		reset-assert-us = <11000>;
-		reset-deassert-us = <70000>;
-	};
-};
diff --git a/arch/arm64/boot/dts/qcom/sar2130p.dtsi b/arch/arm64/boot/dts/qcom/sar2130p.dtsi
index e400ea4cdee8..d65ad0df6865 100644
--- a/arch/arm64/boot/dts/qcom/sar2130p.dtsi
+++ b/arch/arm64/boot/dts/qcom/sar2130p.dtsi
@@ -3,6 +3,7 @@
  * Copyright (c) 2024, Linaro Limited
  */
 
+#include <dt-bindings/clock/qcom,dsi-phy-28nm.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,sar2130p-gcc.h>
 #include <dt-bindings/clock/qcom,sar2130p-gpucc.h>
@@ -1302,10 +1303,10 @@
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
 				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
@@ -1421,10 +1422,10 @@
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
 				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
@@ -2036,8 +2037,8 @@
 
 			power-domains = <&dispcc MDSS_GDSC>;
 
-			interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ACTIVE_ONLY
-					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>,
+			interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
 					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
 					 &config_noc SLAVE_DISPLAY_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "mdp0-mem", "cpu-cfg";
@@ -2053,7 +2054,7 @@
 			mdss_mdp: display-controller@ae01000 {
 				compatible = "qcom,sar2130p-dpu";
 				reg = <0x0 0x0ae01000 0x0 0x8f000>,
-				      <0x0 0x0aeb0000 0x0 0x2008>;
+				      <0x0 0x0aeb0000 0x0 0x3000>;
 				reg-names = "mdp",
 					    "vbif";
 
@@ -2143,16 +2144,20 @@
 					 <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
 					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
 					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
-					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK>;
 				clock-names = "core_iface",
 					      "core_aux",
 					      "ctrl_link",
 					      "ctrl_link_iface",
-					      "stream_pixel";
+					      "stream_pixel",
+					      "stream_1_pixel";
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
-						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>;
 				assigned-clock-parents = <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 							 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 
 				phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>;
@@ -2237,8 +2242,8 @@
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi0_phy 0>,
-							 <&mdss_dsi0_phy 1>;
+				assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&mdss_dsi_opp_table>;
 
@@ -2333,8 +2338,8 @@
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE1_CLK_SRC>,
 						  <&dispcc DISP_CC_MDSS_PCLK1_CLK_SRC>;
-				assigned-clock-parents = <&mdss_dsi1_phy 0>,
-							 <&mdss_dsi1_phy 1>;
+				assigned-clock-parents = <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+							 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>;
 
 				operating-points-v2 = <&mdss_dsi_opp_table>;
 
@@ -2392,10 +2397,10 @@
 				 <&rpmhcc RPMH_CXO_CLK_A>,
 				 <&gcc GCC_DISP_AHB_CLK>,
 				 <&sleep_clk>,
-				 <&mdss_dsi0_phy 0>,
-				 <&mdss_dsi0_phy 1>,
-				 <&mdss_dsi1_phy 0>,
-				 <&mdss_dsi1_phy 1>,
+				 <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_BYTE_PLL_CLK>,
+				 <&mdss_dsi1_phy DSI_PIXEL_PLL_CLK>,
 				 <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
 				 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 				 <0>, /* dp1 */
diff --git a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
index 672ac4c3afa3..ad342d8b7508 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-acer-aspire1.dts
@@ -438,15 +438,11 @@
 };
 
 &mdss_dp {
-	data-lanes = <0 1>;
-
-	vdda-1p2-supply = <&vreg_l3c_1p2>;
-	vdda-0p9-supply = <&vreg_l4a_0p8>;
-
 	status = "okay";
 };
 
 &mdss_dp_out {
+	data-lanes = <0 1>;
 	remote-endpoint = <&ec_dp_in>;
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sc7180-idp.dts b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
index 0146fb0036d4..19cf419cf531 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7180-idp.dts
@@ -323,15 +323,11 @@
 			};
 		};
 	};
+};
 
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&panel0_in>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
+&mdss_dsi0_out {
+	remote-endpoint = <&panel0_in>;
+	data-lanes = <0 1 2 3>;
 };
 
 &mdss_dsi0_phy {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
index ff8996b4de4e..4bea97e4246e 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-quackingstick.dtsi
@@ -90,15 +90,11 @@
 			};
 		};
 	};
+};
 
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&panel_in>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
+&mdss_dsi0_out {
+	remote-endpoint = <&panel_in>;
+	data-lanes = <0 1 2 3>;
 };
 
 &sdhc_2 {
diff --git a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
index 17908c936520..6078308694ac 100644
--- a/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180-trogdor-wormdingler.dtsi
@@ -148,15 +148,11 @@
 			};
 		};
 	};
+};
 
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&panel_in>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
+&mdss_dsi0_out {
+	remote-endpoint = <&panel_in>;
+	data-lanes = <0 1 2 3>;
 };
 
 &pm6150_adc {
diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 3afb69921be3..a0df10a97c7f 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -2897,6 +2897,31 @@
 
 			#clock-cells = <1>;
 			#phy-cells = <1>;
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_qmpphy_out: endpoint { };
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_1_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_1_qmpphy_dp_in: endpoint { };
+				};
+			};
 		};
 
 		pmu@90b6300 {
@@ -3070,6 +3095,26 @@
 				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
 				phy-names = "usb2-phy", "usb3-phy";
 				maximum-speed = "super-speed";
+
+				ports {
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					port@0 {
+						reg = <0>;
+
+						usb_1_dwc3_hs: endpoint {
+						};
+					};
+
+					port@1 {
+						reg = <1>;
+
+						usb_1_dwc3_ss: endpoint {
+							remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
+						};
+					};
+				};
 			};
 		};
 
@@ -3095,14 +3140,6 @@
 					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_VENUS_CFG 0>;
 			interconnect-names = "video-mem", "cpu-cfg";
 
-			video-decoder {
-				compatible = "venus-decoder";
-			};
-
-			video-encoder {
-				compatible = "venus-encoder";
-			};
-
 			venus_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
@@ -3392,8 +3429,10 @@
 				ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
+
 					port@0 {
 						reg = <0>;
+
 						dp_in: endpoint {
 							remote-endpoint = <&dpu_intf0_out>;
 						};
@@ -3401,6 +3440,7 @@
 
 					port@1 {
 						reg = <1>;
+
 						mdss_dp_out: endpoint { };
 					};
 				};
diff --git a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
index 8b4239f13748..84c6d662b54f 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-chrome-common.dtsi
@@ -44,11 +44,6 @@
 			reg = <0x0 0x8ad00000 0x0 0x500000>;
 			no-map;
 		};
-
-		venus_mem: memory@8b200000 {
-			reg = <0x0 0x8b200000 0x0 0x500000>;
-			no-map;
-		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
index 2ba4ea60cb14..5c5e4f1dd221 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-herobrine.dtsi
@@ -621,15 +621,13 @@ ap_ec_spi: &spi10 {
 };
 
 &usb_1 {
-	status = "okay";
-};
-
-&usb_1_dwc3 {
 	dr_mode = "host";
 
 	#address-cells = <1>;
 	#size-cells = <0>;
 
+	status = "okay";
+
 	/* 2.x hub on port 1 */
 	usb_hub_2_x: hub@1 {
 		compatible = "usbbda,5411";
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dts b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
index b5fe7356be48..3103f94cd685 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dts
@@ -81,11 +81,9 @@
 };
 
 &usb_2 {
-	status = "okay";
-};
-
-&usb_2_dwc3 {
 	dr_mode = "otg";
+
+	status = "okay";
 };
 
 &usb_2_hsphy {
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index 90e5b9ab5b84..ccd39a1baeda 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -520,11 +520,9 @@
 };
 
 &usb_1 {
-	status = "okay";
-};
-
-&usb_1_dwc3 {
 	dr_mode = "host";
+
+	status = "okay";
 };
 
 &usb_1_hsphy {
diff --git a/arch/arm64/boot/dts/qcom/sc7280.dtsi b/arch/arm64/boot/dts/qcom/sc7280.dtsi
index 64a2abd30100..4b04dea57ec8 100644
--- a/arch/arm64/boot/dts/qcom/sc7280.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280.dtsi
@@ -28,6 +28,7 @@
 #include <dt-bindings/soc/qcom,apr.h>
 #include <dt-bindings/soc/qcom,rpmh-rsc.h>
 #include <dt-bindings/sound/qcom,lpass.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
 #include <dt-bindings/sound/qcom,q6asm.h>
 #include <dt-bindings/thermal/thermal.h>
 
@@ -620,12 +621,12 @@
 
 		cpu4_opp_2400mhz: opp-2400000000 {
 			opp-hz = /bits/ 64 <2400000000>;
-			opp-peak-kBps = <8532000 48537600>;
+			opp-peak-kBps = <12787200 48537600>;
 		};
 
 		cpu4_opp_2611mhz: opp-2611200000 {
 			opp-hz = /bits/ 64 <2611200000>;
-			opp-peak-kBps = <8532000 48537600>;
+			opp-peak-kBps = <12787200 48537600>;
 		};
 	};
 
@@ -685,22 +686,22 @@
 
 		cpu7_opp_2400mhz: opp-2400000000 {
 			opp-hz = /bits/ 64 <2400000000>;
-			opp-peak-kBps = <8532000 48537600>;
+			opp-peak-kBps = <12787200 48537600>;
 		};
 
 		cpu7_opp_2515mhz: opp-2515200000 {
 			opp-hz = /bits/ 64 <2515200000>;
-			opp-peak-kBps = <8532000 48537600>;
+			opp-peak-kBps = <12787200 48537600>;
 		};
 
 		cpu7_opp_2707mhz: opp-2707200000 {
 			opp-hz = /bits/ 64 <2707200000>;
-			opp-peak-kBps = <8532000 48537600>;
+			opp-peak-kBps = <12787200 48537600>;
 		};
 
 		cpu7_opp_3014mhz: opp-3014400000 {
 			opp-hz = /bits/ 64 <3014400000>;
-			opp-peak-kBps = <8532000 48537600>;
+			opp-peak-kBps = <12787200 48537600>;
 		};
 	};
 
@@ -2200,6 +2201,135 @@
 			qcom,smem-state-names = "wlan-smp2p-out";
 		};
 
+		pcie0: pcie@1c00000 {
+			compatible = "qcom,pcie-sc7280";
+			reg = <0 0x01c00000 0 0x3000>,
+			      <0 0x60000000 0 0xf1d>,
+			      <0 0x60000f20 0 0xa8>,
+			      <0 0x60001000 0 0x1000>,
+			      <0 0x60100000 0 0x100000>,
+			      <0 0x01c03000 0 0x1000>;
+			reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
+			device_type = "pci";
+			linux,pci-domain = <0>;
+			bus-range = <0x00 0xff>;
+			num-lanes = <1>;
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+				 <&gcc GCC_PCIE_0_PIPE_CLK_SRC>,
+				 <&pcie0_phy>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_CENTER_SF_AXI_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>;
+			clock-names = "pipe",
+				      "pipe_mux",
+				      "phy_pipe",
+				      "ref",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "tbu",
+				      "ddrss_sf_tbu",
+				      "aggre0",
+				      "aggre1";
+
+			iommu-map = <0x0   &apps_smmu 0x1c00 0x1>,
+				    <0x100 &apps_smmu 0x1c01 0x1>;
+
+			resets = <&gcc GCC_PCIE_0_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc GCC_PCIE_0_GDSC>;
+
+			phys = <&pcie0_phy>;
+			phy-names = "pciephy";
+
+			pinctrl-names = "default";
+			pinctrl-0 = <&pcie0_clkreq_n>;
+			dma-coherent;
+
+			status = "disabled";
+
+			pcie0_port: pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
+		};
+
+		pcie0_phy: phy@1c06000 {
+			compatible = "qcom,sm8250-qmp-gen3x1-pcie-phy";
+			reg = <0 0x01c06000 0 0x1000>;
+
+			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_CLKREF_EN>,
+				 <&gcc GCC_PCIE0_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_0_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "refgen",
+				      "pipe";
+
+			clock-output-names = "pcie_0_pipe_clk";
+			#clock-cells = <0>;
+
+			#phy-cells = <0>;
+
+			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE0_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			status = "disabled";
+		};
+
 		pcie1: pcie@1c08000 {
 			compatible = "qcom,pcie-sc7280";
 			reg = <0 0x01c08000 0 0x3000>,
@@ -2240,10 +2370,10 @@
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
 				 <&gcc GCC_PCIE_1_PIPE_CLK_SRC>,
@@ -2644,6 +2774,66 @@
 			status = "disabled";
 		};
 
+		lpass_wsa_macro: codec@3240000 {
+			compatible = "qcom,sc7280-lpass-wsa-macro";
+			reg = <0x0 0x03240000 0x0 0x1000>;
+
+			clocks = <&lpass_aon LPASS_AON_CC_TX_MCLK_CLK>,
+				 <&lpass_aon LPASS_AON_CC_TX_MCLK_2X_CLK>,
+				 <&q6afecc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&q6afecc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
+				 <&lpass_va_macro>;
+			clock-names = "mclk",
+				      "npl",
+				      "macro",
+				      "dcodec",
+				      "fsgen";
+
+			pinctrl-0 = <&lpass_wsa_swr_clk>, <&lpass_wsa_swr_data>;
+			pinctrl-names = "default";
+
+			#clock-cells = <0>;
+			clock-output-names = "mclk";
+			#sound-dai-cells = <1>;
+
+			status = "disabled";
+		};
+
+		swr2: soundwire@3250000 {
+			compatible = "qcom,soundwire-v1.6.0";
+			reg = <0x0 0x03250000 0x0 0x2000>;
+
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lpass_wsa_macro>;
+			clock-names = "iface";
+
+			resets = <&lpass_audiocc LPASS_AUDIO_SWR_WSA_CGCR>;
+			reset-names = "swr_audio_cgcr";
+
+			qcom,din-ports = <2>;
+			qcom,dout-ports = <6>;
+
+			qcom,ports-sinterval-low = /bits/ 8 <0x07 0x1f 0x3f 0x07
+								0x1f 0x3f 0x0f 0x0f>;
+			qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0c 0x06 0x12 0x0d 0x07 0x0a>;
+			qcom,ports-offset2 = /bits/ 8 <0xff 0x00 0x1f 0xff 0x00 0x1f 0x00 0x00>;
+			qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff 0xff 0xff>;
+			qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0x01 0xff 0xff 0x01
+							       0xff 0xff>;
+			qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff
+								0xff 0xff>;
+			qcom,ports-lane-control = /bits/ 8 <0xff 0xff 0xff 0xff 0xff 0xff
+							    0xff 0xff>;
+
+			#address-cells = <2>;
+			#size-cells = <0>;
+			#sound-dai-cells = <1>;
+
+			status = "disabled";
+		};
+
 		lpass_audiocc: clock-controller@3300000 {
 			compatible = "qcom,sc7280-lpassaudiocc";
 			reg = <0 0x03300000 0 0x30000>,
@@ -2811,41 +3001,77 @@
 			lpass_dmic01_clk: dmic01-clk-state {
 				pins = "gpio6";
 				function = "dmic1_clk";
+				drive-strength = <8>;
+				bias-disable;
 			};
 
 			lpass_dmic01_data: dmic01-data-state {
 				pins = "gpio7";
 				function = "dmic1_data";
+				drive-strength = <8>;
+				bias-pull-down;
 			};
 
 			lpass_dmic23_clk: dmic23-clk-state {
 				pins = "gpio8";
 				function = "dmic2_clk";
+				drive-strength = <8>;
+				bias-disable;
 			};
 
 			lpass_dmic23_data: dmic23-data-state {
 				pins = "gpio9";
 				function = "dmic2_data";
+				drive-strength = <8>;
+				bias-pull-down;
 			};
 
 			lpass_rx_swr_clk: rx-swr-clk-state {
 				pins = "gpio3";
 				function = "swr_rx_clk";
+				drive-strength = <2>;
+				slew-rate = <1>;
+				bias-disable;
 			};
 
 			lpass_rx_swr_data: rx-swr-data-state {
 				pins = "gpio4", "gpio5";
 				function = "swr_rx_data";
+				drive-strength = <2>;
+				slew-rate = <1>;
+				bias-bus-hold;
 			};
 
 			lpass_tx_swr_clk: tx-swr-clk-state {
 				pins = "gpio0";
 				function = "swr_tx_clk";
+				drive-strength = <2>;
+				slew-rate = <1>;
+				bias-disable;
 			};
 
 			lpass_tx_swr_data: tx-swr-data-state {
 				pins = "gpio1", "gpio2", "gpio14";
 				function = "swr_tx_data";
+				drive-strength = <2>;
+				slew-rate = <1>;
+				bias-bus-hold;
+			};
+
+			lpass_wsa_swr_clk: wsa-swr-clk-state {
+				pins = "gpio10";
+				function = "wsa_swr_clk";
+				drive-strength = <2>;
+				slew-rate = <1>;
+				bias-disable;
+			};
+
+			lpass_wsa_swr_data: wsa-swr-data-state {
+				pins = "gpio11";
+				function = "wsa_swr_data";
+				drive-strength = <2>;
+				slew-rate = <1>;
+				bias-bus-hold;
 			};
 		};
 
@@ -3711,14 +3937,10 @@
 			};
 		};
 
-		usb_2: usb@8cf8800 {
-			compatible = "qcom,sc7280-dwc3", "qcom,dwc3";
-			reg = <0 0x08cf8800 0 0x400>;
+		usb_2: usb@8c00000 {
+			compatible = "qcom,sc7280-dwc3", "qcom,snps-dwc3";
+			reg = <0 0x08c00000 0 0xfc100>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-			dma-ranges;
 
 			clocks = <&gcc GCC_CFG_NOC_USB3_SEC_AXI_CLK>,
 				 <&gcc GCC_USB30_SEC_MASTER_CLK>,
@@ -3735,11 +3957,13 @@
 					  <&gcc GCC_USB30_SEC_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
 					      <&intc GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 12 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 13 IRQ_TYPE_EDGE_BOTH>;
-			interrupt-names = "pwr_event",
+			interrupt-names = "dwc_usb3",
+					  "pwr_event",
 					  "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq";
@@ -3753,24 +3977,19 @@
 					<&gem_noc MASTER_APPSS_PROC 0 &cnoc2 SLAVE_USB2 0>;
 			interconnect-names = "usb-ddr", "apps-usb";
 
-			usb_2_dwc3: usb@8c00000 {
-				compatible = "snps,dwc3";
-				reg = <0 0x08c00000 0 0xe000>;
-				interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
-				iommus = <&apps_smmu 0xa0 0x0>;
-				snps,dis_u2_susphy_quirk;
-				snps,dis_enblslpm_quirk;
-				snps,dis-u1-entry-quirk;
-				snps,dis-u2-entry-quirk;
-				phys = <&usb_2_hsphy>;
-				phy-names = "usb2-phy";
-				maximum-speed = "high-speed";
-				usb-role-switch;
+			iommus = <&apps_smmu 0xa0 0x0>;
+			snps,dis_u2_susphy_quirk;
+			snps,dis_enblslpm_quirk;
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
+			phys = <&usb_2_hsphy>;
+			phy-names = "usb2-phy";
+			maximum-speed = "high-speed";
+			usb-role-switch;
 
-				port {
-					usb2_role_switch: endpoint {
-						remote-endpoint = <&eud_ep>;
-					};
+			port {
+				usb2_role_switch: endpoint {
+					remote-endpoint = <&eud_ep>;
 				};
 			};
 		};
@@ -3822,7 +4041,7 @@
 
 			status = "disabled";
 
-			glink-edge {
+			remoteproc_adsp_glink: glink-edge {
 				interrupts-extended = <&ipcc IPCC_CLIENT_LPASS
 							     IPCC_MPROC_SIGNAL_GLINK_QMP
 							     IRQ_TYPE_EDGE_RISING>;
@@ -3862,6 +4081,13 @@
 							compatible = "qcom,q6afe-clocks";
 							#clock-cells = <2>;
 						};
+
+						q6usbdai: usbd {
+							compatible = "qcom,q6usb";
+							iommus = <&apps_smmu 0x180f 0x0>;
+							#sound-dai-cells = <1>;
+							qcom,usb-audio-intr-idx = /bits/ 16 <2>;
+						};
 					};
 
 					q6asm: service@7 {
@@ -4013,6 +4239,12 @@
 				opp-7 {
 					opp-peak-kBps = <8532000>;
 				};
+				opp-8 {
+					opp-peak-kBps = <10944000>;
+				};
+				opp-9 {
+					opp-peak-kBps = <12787200>;
+				};
 			};
 		};
 
@@ -4252,14 +4484,10 @@
 			};
 		};
 
-		usb_1: usb@a6f8800 {
-			compatible = "qcom,sc7280-dwc3", "qcom,dwc3";
-			reg = <0 0x0a6f8800 0 0x400>;
+		usb_1: usb@a600000 {
+			compatible = "qcom,sc7280-dwc3", "qcom,snps-dwc3";
+			reg = <0 0x0a600000 0 0xfc100>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-			dma-ranges;
 
 			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
 				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
@@ -4276,12 +4504,14 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
 					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "pwr_event",
+			interrupt-names = "dwc_usb3",
+					  "pwr_event",
 					  "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
@@ -4298,37 +4528,33 @@
 
 			wakeup-source;
 
-			usb_1_dwc3: usb@a600000 {
-				compatible = "snps,dwc3";
-				reg = <0 0x0a600000 0 0xe000>;
-				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
-				iommus = <&apps_smmu 0xe0 0x0>;
-				snps,dis_u2_susphy_quirk;
-				snps,dis_enblslpm_quirk;
-				snps,parkmode-disable-ss-quirk;
-				snps,dis-u1-entry-quirk;
-				snps,dis-u2-entry-quirk;
-				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
-				phy-names = "usb2-phy", "usb3-phy";
-				maximum-speed = "super-speed";
+			iommus = <&apps_smmu 0xe0 0x0>;
+			snps,dis_u2_susphy_quirk;
+			snps,dis_enblslpm_quirk;
+			snps,parkmode-disable-ss-quirk;
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
+			num-hc-interrupters = /bits/ 16 <3>;
+			phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
+			phy-names = "usb2-phy", "usb3-phy";
+			maximum-speed = "super-speed";
 
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
 
-					port@0 {
-						reg = <0>;
+				port@0 {
+					reg = <0>;
 
-						usb_1_dwc3_hs: endpoint {
-						};
+					usb_1_dwc3_hs: endpoint {
 					};
+				};
 
-					port@1 {
-						reg = <1>;
+				port@1 {
+					reg = <1>;
 
-						usb_1_dwc3_ss: endpoint {
-							remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
-						};
+					usb_1_dwc3_ss: endpoint {
+						remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
 					};
 				};
 			};
@@ -4724,6 +4950,8 @@
 
 			iommus = <&apps_smmu 0x900 0x402>;
 
+			resets = <&dispcc DISP_CC_MDSS_CORE_BCR>;
+
 			#address-cells = <2>;
 			#size-cells = <2>;
 			ranges;
@@ -4916,7 +5144,8 @@
 				reg = <0 0x0aea0000 0 0x200>,
 				      <0 0x0aea0200 0 0x200>,
 				      <0 0x0aea0400 0 0xc00>,
-				      <0 0x0aea1000 0 0x400>;
+				      <0 0x0aea1000 0 0x400>,
+				      <0 0x0aea1400 0 0x400>;
 
 				interrupt-parent = <&mdss>;
 				interrupts = <14>;
@@ -5285,6 +5514,11 @@
 				function = "mi2s1_ws";
 			};
 
+			pcie0_clkreq_n: pcie0-clkreq-n-state {
+				pins = "gpio88";
+				function = "pcie0_clkreqn";
+			};
+
 			pcie1_clkreq_n: pcie1-clkreq-n-state {
 				pins = "gpio79";
 				function = "pcie1_clkreqn";
diff --git a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
index 21c2d25a2945..08d0784d0cbb 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
+++ b/arch/arm64/boot/dts/qcom/sc8180x-lenovo-flex-5g.dts
@@ -436,8 +436,6 @@
 };
 
 &mdss_edp {
-	data-lanes = <0 1 2 3>;
-
 	pinctrl-0 = <&edp_hpd_active>;
 	pinctrl-names = "default";
 
@@ -457,15 +455,11 @@
 			};
 		};
 	};
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-			mdss_edp_out: endpoint {
-				remote-endpoint = <&auo_b140han06_in>;
-			};
-		};
-	};
+&mdss_edp_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&auo_b140han06_in>;
 };
 
 &pcie3 {
diff --git a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
index 7a4bd6955470..93de9fe918eb 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
+++ b/arch/arm64/boot/dts/qcom/sc8180x-primus.dts
@@ -531,8 +531,6 @@
 };
 
 &mdss_edp {
-	data-lanes = <0 1 2 3>;
-
 	pinctrl-names = "default";
 	pinctrl-0 = <&edp_hpd_active>;
 
@@ -551,15 +549,11 @@
 			};
 		};
 	};
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-			mdss_edp_out: endpoint {
-				remote-endpoint = <&auo_b133han05_in>;
-			};
-		};
-	};
+&mdss_edp_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&auo_b133han05_in>;
 };
 
 &pcie1 {
diff --git a/arch/arm64/boot/dts/qcom/sc8180x.dtsi b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
index f4f1d6a11960..85c2afcb417d 100644
--- a/arch/arm64/boot/dts/qcom/sc8180x.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8180x.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/clock/qcom,gpucc-sm8150.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,sc8180x-camcc.h>
+#include <dt-bindings/clock/qcom,videocc-sm8150.h>
 #include <dt-bindings/interconnect/qcom,icc.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sc8180x.h>
@@ -1740,10 +1741,10 @@
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
 				 <&gcc GCC_PCIE_0_AUX_CLK>,
@@ -1859,10 +1860,10 @@
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_3_PIPE_CLK>,
 				 <&gcc GCC_PCIE_3_AUX_CLK>,
@@ -1979,10 +1980,10 @@
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 747 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 746 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 745 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 744 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 747 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 746 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 745 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 744 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
 				 <&gcc GCC_PCIE_1_AUX_CLK>,
@@ -2099,10 +2100,10 @@
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 663 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 662 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 661 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 660 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 663 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 662 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 660 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
 				 <&gcc GCC_PCIE_2_AUX_CLK>,
@@ -2927,6 +2928,20 @@
 			};
 		};
 
+		videocc: clock-controller@ab00000 {
+			compatible = "qcom,sc8180x-videocc",
+				     "qcom,sm8150-videocc";
+			reg = <0 0x0ab00000 0 0x10000>;
+			clocks = <&gcc GCC_VIDEO_AHB_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>;
+			clock-names = "iface", "bi_tcxo";
+			power-domains = <&rpmhpd SC8180X_MMCX>;
+			required-opps = <&rpmhpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		camcc: clock-controller@ad00000 {
 			compatible = "qcom,sc8180x-camcc";
 			reg = <0 0x0ad00000 0 0x20000>;
@@ -2940,7 +2955,7 @@
 			#power-domain-cells = <1>;
 		};
 
-		mdss: mdss@ae00000 {
+		mdss: display-subsystem@ae00000 {
 			compatible = "qcom,sc8180x-mdss";
 			reg = <0 0x0ae00000 0 0x1000>;
 			reg-names = "mdss";
@@ -2980,7 +2995,7 @@
 
 			status = "disabled";
 
-			mdss_mdp: mdp@ae01000 {
+			mdss_mdp: display-controller@ae01000 {
 				compatible = "qcom,sc8180x-dpu";
 				reg = <0 0x0ae01000 0 0x8f000>,
 				      <0 0x0aeb0000 0 0x3000>;
@@ -3074,7 +3089,8 @@
 			};
 
 			mdss_dsi0: dsi@ae94000 {
-				compatible = "qcom,mdss-dsi-ctrl";
+				compatible = "qcom,sc8180x-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
 				reg = <0 0x0ae94000 0 0x400>;
 				reg-names = "dsi_ctrl";
 
@@ -3140,7 +3156,7 @@
 				};
 			};
 
-			mdss_dsi0_phy: dsi-phy@ae94400 {
+			mdss_dsi0_phy: phy@ae94400 {
 				compatible = "qcom,dsi-phy-7nm";
 				reg = <0 0x0ae94400 0 0x200>,
 				      <0 0x0ae94600 0 0x280>,
@@ -3160,7 +3176,8 @@
 			};
 
 			mdss_dsi1: dsi@ae96000 {
-				compatible = "qcom,mdss-dsi-ctrl";
+				compatible = "qcom,sc8180x-dsi-ctrl",
+					     "qcom,mdss-dsi-ctrl";
 				reg = <0 0x0ae96000 0 0x400>;
 				reg-names = "dsi_ctrl";
 
@@ -3207,7 +3224,7 @@
 				};
 			};
 
-			mdss_dsi1_phy: dsi-phy@ae96400 {
+			mdss_dsi1_phy: phy@ae96400 {
 				compatible = "qcom,dsi-phy-7nm";
 				reg = <0 0x0ae96400 0 0x200>,
 				      <0 0x0ae96600 0 0x280>,
@@ -3239,16 +3256,20 @@
 					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
 					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
 					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
-					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK>;
 				clock-names = "core_iface",
 					      "core_aux",
 					      "ctrl_link",
 					      "ctrl_link_iface",
-					      "stream_pixel";
+					      "stream_pixel",
+					      "stream_1_pixel";
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
-						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK_SRC>;
 				assigned-clock-parents = <&usb_prim_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_prim_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 							 <&usb_prim_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 
 				phys = <&usb_prim_qmpphy QMP_USB43DP_DP_PHY>;
@@ -3317,16 +3338,20 @@
 					 <&dispcc DISP_CC_MDSS_DP_AUX1_CLK>,
 					 <&dispcc DISP_CC_MDSS_DP_LINK1_CLK>,
 					 <&dispcc DISP_CC_MDSS_DP_LINK1_INTF_CLK>,
-					 <&dispcc DISP_CC_MDSS_DP_PIXEL2_CLK>;
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL2_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK>;
 				clock-names = "core_iface",
 					      "core_aux",
 					      "ctrl_link",
 					      "ctrl_link_iface",
-					      "stream_pixel";
+					      "stream_pixel",
+					      "stream_1_pixel";
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK1_CLK_SRC>,
-						  <&dispcc DISP_CC_MDSS_DP_PIXEL2_CLK_SRC>;
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL2_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK_SRC>;
 				assigned-clock-parents = <&usb_sec_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_sec_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 							 <&usb_sec_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 
 				phys = <&usb_sec_qmpphy QMP_USB43DP_DP_PHY>;
@@ -3387,7 +3412,8 @@
 				reg = <0 0xae9a000 0 0x200>,
 				      <0 0xae9a200 0 0x200>,
 				      <0 0xae9a400 0 0x600>,
-				      <0 0xae9aa00 0 0x400>;
+				      <0 0xae9aa00 0 0x400>,
+				      <0 0xae9b000 0 0x400>;
 				interrupt-parent = <&mdss>;
 				interrupts = <14>;
 				clocks = <&dispcc DISP_CC_MDSS_AHB_CLK>,
@@ -3423,6 +3449,13 @@
 							remote-endpoint = <&dpu_intf5_out>;
 						};
 					};
+
+					port@1 {
+						reg = <1>;
+
+						mdss_edp_out: endpoint {
+						};
+					};
 				};
 
 				edp_opp_table: opp-table {
@@ -3714,6 +3747,7 @@
 		intc: interrupt-controller@17a00000 {
 			compatible = "arm,gic-v3";
 			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			reg = <0x0 0x17a00000 0x0 0x10000>,	/* GICD */
 			      <0x0 0x17a60000 0x0 0x100000>;	/* GICR * 8 */
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
index 8e2c02497c05..490e970c54a2 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-crd.dts
@@ -495,6 +495,18 @@
 	status = "okay";
 };
 
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
 &gpu {
 	status = "okay";
 
@@ -548,15 +560,10 @@
 			};
 		};
 	};
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-			mdss0_dp3_out: endpoint {
-				remote-endpoint = <&edp_panel_in>;
-			};
-		};
-	};
+&mdss0_dp3_out {
+	remote-endpoint = <&edp_panel_in>;
 };
 
 &mdss0_dp3_phy {
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts b/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts
index 1667c7157057..0374251d3329 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-huawei-gaokun3.dts
@@ -586,6 +586,18 @@
 	status = "okay";
 };
 
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
 &gpu {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
index cefecb7a23cf..637430719e6d 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-lenovo-thinkpad-x13s.dts
@@ -708,6 +708,18 @@
 	status = "okay";
 };
 
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
 &gpu {
 	status = "okay";
 
@@ -726,7 +738,7 @@
 };
 
 &mdss0_dp0_out {
-	data-lanes = <0 1>;
+	data-lanes = <0 1 2 3>;
 	remote-endpoint = <&usb_0_qmpphy_dp_in>;
 };
 
@@ -735,7 +747,7 @@
 };
 
 &mdss0_dp1_out {
-	data-lanes = <0 1>;
+	data-lanes = <0 1 2 3>;
 	remote-endpoint = <&usb_1_qmpphy_dp_in>;
 };
 
@@ -761,15 +773,10 @@
 			};
 		};
 	};
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-			mdss0_dp3_out: endpoint {
-				remote-endpoint = <&edp_panel_in>;
-			};
-		};
-	};
+&mdss0_dp3_out {
+	remote-endpoint = <&edp_panel_in>;
 };
 
 &mdss0_dp3_phy {
@@ -1360,6 +1367,7 @@
 	vdda-phy-supply = <&vreg_l9d>;
 	vdda-pll-supply = <&vreg_l4d>;
 
+	mode-switch;
 	orientation-switch;
 
 	status = "okay";
@@ -1397,6 +1405,7 @@
 	vdda-phy-supply = <&vreg_l4b>;
 	vdda-pll-supply = <&vreg_l3b>;
 
+	mode-switch;
 	orientation-switch;
 
 	status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts
index d00889fa6f0b..aeed3ef152eb 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-arcata.dts
@@ -448,6 +448,18 @@
 	status = "okay";
 };
 
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
 &gpu {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts
index 812251324002..a40dccd70dfd 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts
+++ b/arch/arm64/boot/dts/qcom/sc8280xp-microsoft-blackrock.dts
@@ -63,7 +63,7 @@
 
 		port {
 			dp1_connector_in: endpoint {
-				remote-endpoint = <&mdss0_dp2_phy_out>;
+				remote-endpoint = <&mdss0_dp2_out>;
 			};
 		};
 	};
@@ -565,6 +565,18 @@
 	status = "okay";
 };
 
+&gpi_dma0 {
+	status = "okay";
+};
+
+&gpi_dma1 {
+	status = "okay";
+};
+
+&gpi_dma2 {
+	status = "okay";
+};
+
 &gpu {
 	status = "okay";
 
@@ -602,15 +614,10 @@
 	data-lanes = <0 1 2 3>;
 
 	status = "okay";
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-			mdss0_dp2_phy_out: endpoint {
-				remote-endpoint = <&dp1_connector_in>;
-			};
-		};
-	};
+&mdss0_dp2_out {
+	remote-endpoint = <&dp1_connector_in>;
 };
 
 &mdss0_dp2_phy {
diff --git a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
index 87555a119d94..279e5e6beae2 100644
--- a/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc8280xp.dtsi
@@ -10,6 +10,7 @@
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,sc8280xp-camcc.h>
 #include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h>
+#include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/interconnect/qcom,osm-l3.h>
 #include <dt-bindings/interconnect/qcom,sc8280xp.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
@@ -912,6 +913,32 @@
 			};
 		};
 
+		gpi_dma2: dma-controller@800000 {
+			compatible = "qcom,sc8280xp-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00800000 0 0x60000>;
+
+			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0xfff>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0xb6 0x0>;
+
+			status = "disabled";
+		};
+
 		qup2: geniqup@8c0000 {
 			compatible = "qcom,geni-se-qup";
 			reg = <0 0x008c0000 0 0x2000>;
@@ -939,6 +966,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -955,6 +988,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -971,6 +1010,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -987,6 +1032,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1017,6 +1068,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1033,6 +1090,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1067,6 +1130,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1083,6 +1152,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1099,6 +1174,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1115,6 +1196,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1131,6 +1218,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1147,6 +1240,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1163,6 +1262,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1179,6 +1284,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1195,6 +1306,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma2 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1211,10 +1328,43 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_2 0>,
 				                <&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma2 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma2 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 		};
 
+		gpi_dma0: dma-controller@900000  {
+			compatible = "qcom,sc8280xp-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00900000 0 0x60000>;
+
+			interrupts = <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <13>;
+			dma-channel-mask = <0x1fff>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0x576 0x0>;
+
+			status = "disabled";
+		};
+
 		qup0: geniqup@9c0000 {
 			compatible = "qcom,geni-se-qup";
 			reg = <0 0x009c0000 0 0x6000>;
@@ -1242,6 +1392,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1258,6 +1414,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1274,6 +1436,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1290,6 +1458,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1306,6 +1480,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1322,6 +1502,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1352,6 +1538,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1368,6 +1560,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1384,6 +1582,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1400,6 +1604,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1416,6 +1626,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1432,6 +1648,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1448,6 +1670,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1464,6 +1692,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1480,6 +1714,12 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1496,10 +1736,42 @@
 						<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre1_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma0 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma0 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 		};
 
+		gpi_dma1: dma-controller@a00000 {
+			compatible = "qcom,sc8280xp-gpi-dma", "qcom,sm6350-gpi-dma";
+			reg = <0 0x00a00000 0 0x60000>;
+
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+
+			dma-channels = <12>;
+			dma-channel-mask = <0xfff>;
+			#dma-cells = <3>;
+
+			iommus = <&apps_smmu 0x96 0x0>;
+
+			status = "disabled";
+		};
+
 		qup1: geniqup@ac0000 {
 			compatible = "qcom,geni-se-qup";
 			reg = <0 0x00ac0000 0 0x6000>;
@@ -1527,6 +1799,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 7 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1543,6 +1821,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1559,6 +1843,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 0 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 0 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1575,6 +1865,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1591,6 +1887,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 1 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 1 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1607,6 +1909,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1623,6 +1931,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 2 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 2 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1639,6 +1953,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1655,6 +1975,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 3 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 3 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1671,6 +1997,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1687,6 +2019,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 4 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 4 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1703,6 +2041,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1719,6 +2063,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 5 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 5 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1735,6 +2085,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_I2C>,
+				       <&gpi_dma1 1 6 QCOM_GPI_I2C>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1751,6 +2107,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 6 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 6 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 
@@ -1767,6 +2129,12 @@
 				                <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_QUP_1 0>,
 				                <&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI1 0>;
 				interconnect-names = "qup-core", "qup-config", "qup-memory";
+
+				dmas = <&gpi_dma1 0 7 QCOM_GPI_SPI>,
+				       <&gpi_dma1 1 7 QCOM_GPI_SPI>;
+				dma-names = "tx",
+					    "rx";
+
 				status = "disabled";
 			};
 		};
@@ -1809,10 +2177,10 @@
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE_4_AUX_CLK>,
 				 <&gcc GCC_PCIE_4_CFG_AHB_CLK>,
@@ -1922,10 +2290,10 @@
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 526 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 GIC_SPI 527 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 GIC_SPI 528 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI GIC_SPI 526 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI GIC_SPI 527 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI GIC_SPI 528 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI GIC_SPI 529 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE_3B_AUX_CLK>,
 				 <&gcc GCC_PCIE_3B_CFG_AHB_CLK>,
@@ -2033,10 +2401,10 @@
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 GIC_SPI 542 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI GIC_SPI 499 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI GIC_SPI 542 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI GIC_SPI 543 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI GIC_SPI 544 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE_3A_AUX_CLK>,
 				 <&gcc GCC_PCIE_3A_CFG_AHB_CLK>,
@@ -2147,10 +2515,10 @@
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE_2B_AUX_CLK>,
 				 <&gcc GCC_PCIE_2B_CFG_AHB_CLK>,
@@ -2258,10 +2626,10 @@
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 GIC_SPI GIC_SPI 530 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 GIC_SPI GIC_SPI 531 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 GIC_SPI GIC_SPI 532 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 GIC_SPI GIC_SPI 533 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE_2A_AUX_CLK>,
 				 <&gcc GCC_PCIE_2A_CFG_AHB_CLK>,
@@ -4338,15 +4706,19 @@
 					 <&dispcc0 DISP_CC_MDSS_DPTX0_AUX_CLK>,
 					 <&dispcc0 DISP_CC_MDSS_DPTX0_LINK_CLK>,
 					 <&dispcc0 DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
-					 <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+					 <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL1_CLK>;
 				clock-names = "core_iface", "core_aux",
 					      "ctrl_link",
 					      "ctrl_link_iface",
-					      "stream_pixel";
+					      "stream_pixel",
+					      "stream_1_pixel";
 
 				assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
-						  <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+						  <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
+						  <&dispcc0 DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>;
 				assigned-clock-parents = <&usb_0_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 							 <&usb_0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 
 				phys = <&usb_0_qmpphy QMP_USB43DP_DP_PHY>;
@@ -4417,14 +4789,18 @@
 					 <&dispcc0 DISP_CC_MDSS_DPTX1_AUX_CLK>,
 					 <&dispcc0 DISP_CC_MDSS_DPTX1_LINK_CLK>,
 					 <&dispcc0 DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>,
-					 <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL0_CLK>;
+					 <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL0_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL1_CLK>;
 				clock-names = "core_iface", "core_aux",
 					      "ctrl_link",
-					      "ctrl_link_iface", "stream_pixel";
+					      "ctrl_link_iface", "stream_pixel",
+					      "stream_1_pixel";
 
 				assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>,
-						  <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>;
+						  <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>,
+						  <&dispcc0 DISP_CC_MDSS_DPTX1_PIXEL1_CLK_SRC>;
 				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 
 				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
@@ -4494,10 +4870,12 @@
 					 <&dispcc0 DISP_CC_MDSS_DPTX2_AUX_CLK>,
 					 <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_CLK>,
 					 <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>,
-					 <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>;
+					 <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>,
+					 <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL1_CLK>;
 				clock-names = "core_iface", "core_aux",
 					      "ctrl_link",
-					      "ctrl_link_iface", "stream_pixel";
+					      "ctrl_link_iface", "stream_pixel",
+					      "stream_1_pixel";
 				interrupt-parent = <&mdss0>;
 				interrupts = <14>;
 				phys = <&mdss0_dp2_phy>;
@@ -4505,8 +4883,11 @@
 				power-domains = <&rpmhpd SC8280XP_MMCX>;
 
 				assigned-clocks = <&dispcc0 DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>,
-						  <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>;
-				assigned-clock-parents = <&mdss0_dp2_phy 0>, <&mdss0_dp2_phy 1>;
+						  <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>,
+						  <&dispcc0 DISP_CC_MDSS_DPTX2_PIXEL1_CLK_SRC>;
+				assigned-clock-parents = <&mdss0_dp2_phy 0>,
+							 <&mdss0_dp2_phy 1>,
+							 <&mdss0_dp2_phy 1>;
 				operating-points-v2 = <&mdss0_dp2_opp_table>;
 
 				#sound-dai-cells = <0>;
@@ -4526,6 +4907,9 @@
 
 					port@1 {
 						reg = <1>;
+
+						mdss0_dp2_out: endpoint {
+						};
 					};
 				};
 
@@ -4598,6 +4982,9 @@
 
 					port@1 {
 						reg = <1>;
+
+						mdss0_dp3_out: endpoint {
+						};
 					};
 				};
 
@@ -5669,10 +6056,12 @@
 					 <&dispcc1 DISP_CC_MDSS_DPTX0_AUX_CLK>,
 					 <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_CLK>,
 					 <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
-					 <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+					 <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL1_CLK>;
 				clock-names = "core_iface", "core_aux",
 					      "ctrl_link",
-					      "ctrl_link_iface", "stream_pixel";
+					      "ctrl_link_iface", "stream_pixel",
+					      "stream_1_pixel";
 				interrupt-parent = <&mdss1>;
 				interrupts = <12>;
 				phys = <&mdss1_dp0_phy>;
@@ -5680,8 +6069,11 @@
 				power-domains = <&rpmhpd SC8280XP_MMCX>;
 
 				assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
-						  <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
-				assigned-clock-parents = <&mdss1_dp0_phy 0>, <&mdss1_dp0_phy 1>;
+						  <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
+						  <&dispcc1 DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>;
+				assigned-clock-parents = <&mdss1_dp0_phy 0>,
+							 <&mdss1_dp0_phy 1>,
+							 <&mdss1_dp0_phy 1>;
 				operating-points-v2 = <&mdss1_dp0_opp_table>;
 
 				#sound-dai-cells = <0>;
@@ -5701,6 +6093,9 @@
 
 					port@1 {
 						reg = <1>;
+
+						mdss1_dp0_out: endpoint {
+						};
 					};
 				};
 
@@ -5741,10 +6136,12 @@
 					 <&dispcc1 DISP_CC_MDSS_DPTX1_AUX_CLK>,
 					 <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_CLK>,
 					 <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>,
-					 <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK>;
+					 <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL1_CLK>;
 				clock-names = "core_iface", "core_aux",
 					      "ctrl_link",
-					      "ctrl_link_iface", "stream_pixel";
+					      "ctrl_link_iface", "stream_pixel",
+					      "stream_1_pixel";
 				interrupt-parent = <&mdss1>;
 				interrupts = <13>;
 				phys = <&mdss1_dp1_phy>;
@@ -5752,8 +6149,11 @@
 				power-domains = <&rpmhpd SC8280XP_MMCX>;
 
 				assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>,
-						  <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>;
-				assigned-clock-parents = <&mdss1_dp1_phy 0>, <&mdss1_dp1_phy 1>;
+						  <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>,
+						  <&dispcc1 DISP_CC_MDSS_DPTX1_PIXEL1_CLK_SRC>;
+				assigned-clock-parents = <&mdss1_dp1_phy 0>,
+							 <&mdss1_dp1_phy 1>,
+							 <&mdss1_dp1_phy 1>;
 				operating-points-v2 = <&mdss1_dp1_opp_table>;
 
 				#sound-dai-cells = <0>;
@@ -5773,6 +6173,9 @@
 
 					port@1 {
 						reg = <1>;
+
+						mdss1_dp1_out: endpoint {
+						};
 					};
 				};
 
@@ -5813,10 +6216,12 @@
 					 <&dispcc1 DISP_CC_MDSS_DPTX2_AUX_CLK>,
 					 <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_CLK>,
 					 <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>,
-					 <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>;
+					 <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK>,
+					 <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL1_CLK>;
 				clock-names = "core_iface", "core_aux",
 					      "ctrl_link",
-					      "ctrl_link_iface", "stream_pixel";
+					      "ctrl_link_iface", "stream_pixel",
+					      "stream_1_pixel";
 				interrupt-parent = <&mdss1>;
 				interrupts = <14>;
 				phys = <&mdss1_dp2_phy>;
@@ -5824,8 +6229,11 @@
 				power-domains = <&rpmhpd SC8280XP_MMCX>;
 
 				assigned-clocks = <&dispcc1 DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>,
-						  <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>;
-				assigned-clock-parents = <&mdss1_dp2_phy 0>, <&mdss1_dp2_phy 1>;
+						  <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>,
+						  <&dispcc1 DISP_CC_MDSS_DPTX2_PIXEL1_CLK_SRC>;
+				assigned-clock-parents = <&mdss1_dp2_phy 0>,
+							 <&mdss1_dp2_phy 1>,
+							 <&mdss1_dp2_phy 1>;
 				operating-points-v2 = <&mdss1_dp2_opp_table>;
 
 				#sound-dai-cells = <0>;
@@ -5845,6 +6253,9 @@
 
 					port@1 {
 						reg = <1>;
+
+						mdss1_dp2_out: endpoint {
+						};
 					};
 				};
 
@@ -5917,6 +6328,9 @@
 
 					port@1 {
 						reg = <1>;
+
+						mdss1_dp3_out: endpoint {
+						};
 					};
 				};
 
diff --git a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
index 31ed26c31e6e..55a45b528bd3 100644
--- a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
+++ b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
@@ -36,6 +36,14 @@
 		};
 	};
 
+	/* Dummy regulator until PMI632 has LCDB VSP/VSN support */
+	lcdb_dummy: regulator-lcdb-dummy {
+		compatible = "regulator-fixed";
+		regulator-name = "lcdb_dummy";
+		regulator-min-microvolt = <5500000>;
+		regulator-max-microvolt = <5500000>;
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vph_pwr";
@@ -44,6 +52,14 @@
 	};
 };
 
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/msm8953/fairphone/fp3/a506_zap.mbn";
+};
+
 &hsusb_phy {
 	vdd-supply = <&pm8953_l3>;
 	vdda-pll-supply = <&pm8953_l7>;
@@ -87,6 +103,45 @@
 	status = "okay";
 };
 
+&mdss {
+	status = "okay";
+};
+
+&mdss_dsi0 {
+	vdda-supply = <&pm8953_s3>;
+	status = "okay";
+
+	panel@0 {
+		compatible = "djn,98-03057-6598b-i";
+		reg = <0>;
+
+		reset-gpios = <&tlmm 61 GPIO_ACTIVE_LOW>;
+
+		iovcc-supply = <&pm8953_l6>;
+		vsn-supply = <&lcdb_dummy>;
+		vsp-supply = <&lcdb_dummy>;
+
+		pinctrl-0 = <&mdss_te_default>;
+		pinctrl-names = "default";
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&mdss_dsi0_out>;
+			};
+		};
+	};
+};
+
+&mdss_dsi0_out {
+	data-lanes = <0 1 2 3>;
+	remote-endpoint = <&panel_in>;
+};
+
+&mdss_dsi0_phy {
+	vcca-supply = <&pm8953_l3>;
+	status = "okay";
+};
+
 &mpss {
 	firmware-name = "qcom/msm8953/fairphone/fp3/mba.mbn",
 			"qcom/msm8953/fairphone/fp3/modem.mbn";
@@ -292,6 +347,13 @@
 	 * 135-138: fingerprint reader (SPI)
 	 */
 	gpio-reserved-ranges = <0 4>, <135 4>;
+
+	mdss_te_default: mdss-te-default-state {
+		pins = "gpio24";
+		function = "mdp_vsync";
+		drive-strength = <2>;
+		bias-pull-down;
+	};
 };
 
 &uart_0 {
diff --git a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
index 74b5d9c68eb6..d01422844fbf 100644
--- a/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
+++ b/arch/arm64/boot/dts/qcom/sdm670-google-sargo.dts
@@ -33,6 +33,14 @@
 
 	aliases { };
 
+	battery: battery {
+		compatible = "simple-battery";
+
+		voltage-min-design-microvolt = <3312000>;
+		voltage-max-design-microvolt = <4400000>;
+		charge-full-design-microamp-hours = <3000000>;
+	};
+
 	chosen {
 		stdout-path = "serial0:115200n8";
 
@@ -478,6 +486,15 @@
 	status = "okay";
 };
 
+&pm660_charger {
+	monitored-battery = <&battery>;
+	status = "okay";
+};
+
+&pm660_rradc {
+	status = "okay";
+};
+
 &pm660l_flash {
 	status = "okay";
 
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza-r1.dts b/arch/arm64/boot/dts/qcom/sdm845-cheza-r1.dts
deleted file mode 100644
index bd7c25bb8d35..000000000000
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza-r1.dts
+++ /dev/null
@@ -1,238 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Google Cheza board device tree source
- *
- * Copyright 2018 Google LLC.
- */
-
-/dts-v1/;
-
-#include "sdm845-cheza.dtsi"
-
-/ {
-	model = "Google Cheza (rev1)";
-	compatible = "google,cheza-rev1", "qcom,sdm845";
-
-	/*
-	 * FIXED REGULATORS (not in sdm845-cheza.dtsi) - parents above children
-	 */
-
-	/*
-	 * NOTE: Technically pp3500_a is not the exact same signal as
-	 * pp3500_a_vbob (there's a load switch between them and the EC can
-	 * control pp3500_a via "en_pp3300_a"), but from the AP's point of
-	 * view they are the same.
-	 */
-	pp3500_a:
-	pp3500_a_vbob: pp3500-a-vbob-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vreg_bob";
-
-		/*
-		 * Comes on automatically when pp5000_ldo comes on, which
-		 * comes on automatically when ppvar_sys comes on
-		 */
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3500000>;
-		regulator-max-microvolt = <3500000>;
-
-		vin-supply = <&ppvar_sys>;
-	};
-
-	pp3300_dx_edp: pp3300-dx-edp-regulator {
-		/* Yes, it's really 3.5 despite the name of the signal */
-		regulator-min-microvolt = <3500000>;
-		regulator-max-microvolt = <3500000>;
-
-		vin-supply = <&pp3500_a>;
-	};
-};
-
-/* FIXED REGULATOR OVERRIDES (modifications to sdm845-cheza.dtsi) */
-
-/*
- * L19 and L28 technically go to 3.3V, but most boards have old AOP firmware
- * that limits them to 3.0, and trying to run at 3.3V with that old firmware
- * prevents the system from booting.
- */
-&src_pp3000_l19a {
-	regulator-min-microvolt = <3008000>;
-	regulator-max-microvolt = <3008000>;
-};
-
-&src_pp3300_l22a {
-	/delete-property/regulator-boot-on;
-	/delete-property/regulator-always-on;
-};
-
-&src_pp3300_l28a {
-	regulator-min-microvolt = <3008000>;
-	regulator-max-microvolt = <3008000>;
-};
-
-&src_vreg_bob {
-	regulator-min-microvolt = <3500000>;
-	regulator-max-microvolt = <3500000>;
-	vin-supply = <&pp3500_a_vbob>;
-};
-
-/*
- * NON-REGULATOR OVERRIDES
- * (modifications to sdm845-cheza.dtsi) - alphabetized by dtsi label
- */
-
-/* PINCTRL - board-specific pinctrl */
-
-&tlmm {
-	gpio-line-names = "AP_SPI_FP_MISO",
-			  "AP_SPI_FP_MOSI",
-			  "AP_SPI_FP_CLK",
-			  "AP_SPI_FP_CS_L",
-			  "UART_AP_TX_DBG_RX",
-			  "UART_DBG_TX_AP_RX",
-			  "",
-			  "FP_RST_L",
-			  "FCAM_EN",
-			  "",
-			  "EDP_BRIJ_IRQ",
-			  "EC_IN_RW_ODL",
-			  "",
-			  "RCAM_MCLK",
-			  "FCAM_MCLK",
-			  "",
-			  "RCAM_EN",
-			  "CCI0_SDA",
-			  "CCI0_SCL",
-			  "CCI1_SDA",
-			  "CCI1_SCL",
-			  "FCAM_RST_L",
-			  "",
-			  "PEN_RST_L",
-			  "PEN_IRQ_L",
-			  "",
-			  "RCAM_VSYNC",
-			  "ESIM_MISO",
-			  "ESIM_MOSI",
-			  "ESIM_CLK",
-			  "ESIM_CS_L",
-			  "AP_PEN_1V8_SDA",
-			  "AP_PEN_1V8_SCL",
-			  "AP_TS_I2C_SDA",
-			  "AP_TS_I2C_SCL",
-			  "RCAM_RST_L",
-			  "",
-			  "AP_EDP_BKLTEN",
-			  "AP_BRD_ID1",
-			  "BOOT_CONFIG_4",
-			  "AMP_IRQ_L",
-			  "EDP_BRIJ_I2C_SDA",
-			  "EDP_BRIJ_I2C_SCL",
-			  "EN_PP3300_DX_EDP",
-			  "SD_CD_ODL",
-			  "BT_UART_RTS",
-			  "BT_UART_CTS",
-			  "BT_UART_RXD",
-			  "BT_UART_TXD",
-			  "AMP_I2C_SDA",
-			  "AMP_I2C_SCL",
-			  "AP_BRD_ID3",
-			  "",
-			  "AP_EC_SPI_CLK",
-			  "AP_EC_SPI_CS_L",
-			  "AP_EC_SPI_MISO",
-			  "AP_EC_SPI_MOSI",
-			  "FORCED_USB_BOOT",
-			  "AMP_BCLK",
-			  "AMP_LRCLK",
-			  "AMP_DOUT",
-			  "AMP_DIN",
-			  "AP_BRD_ID2",
-			  "PEN_PDCT_L",
-			  "HP_MCLK",
-			  "HP_BCLK",
-			  "HP_LRCLK",
-			  "HP_DOUT",
-			  "HP_DIN",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "BT_SLIMBUS_DATA",
-			  "BT_SLIMBUS_CLK",
-			  "AMP_RESET_L",
-			  "",
-			  "FCAM_VSYNC",
-			  "",
-			  "AP_SKU_ID1",
-			  "EC_WOV_BCLK",
-			  "EC_WOV_LRCLK",
-			  "EC_WOV_DOUT",
-			  "",
-			  "",
-			  "AP_H1_SPI_MISO",
-			  "AP_H1_SPI_MOSI",
-			  "AP_H1_SPI_CLK",
-			  "AP_H1_SPI_CS_L",
-			  "",
-			  "AP_SPI_CS0_L",
-			  "AP_SPI_MOSI",
-			  "AP_SPI_MISO",
-			  "",
-			  "",
-			  "AP_SPI_CLK",
-			  "",
-			  "RFFE6_CLK",
-			  "RFFE6_DATA",
-			  "BOOT_CONFIG_1",
-			  "BOOT_CONFIG_2",
-			  "BOOT_CONFIG_0",
-			  "EDP_BRIJ_EN",
-			  "",
-			  "USB_HS_TX_EN",
-			  "UIM2_DATA",
-			  "UIM2_CLK",
-			  "UIM2_RST",
-			  "UIM2_PRESENT",
-			  "UIM1_DATA",
-			  "UIM1_CLK",
-			  "UIM1_RST",
-			  "",
-			  "AP_SKU_ID2",
-			  "SDM_GRFC_8",
-			  "SDM_GRFC_9",
-			  "AP_RST_REQ",
-			  "HP_IRQ",
-			  "TS_RESET_L",
-			  "PEN_EJECT_ODL",
-			  "HUB_RST_L",
-			  "FP_TO_AP_IRQ",
-			  "AP_EC_INT_L",
-			  "",
-			  "",
-			  "TS_INT_L",
-			  "AP_SUSPEND_L",
-			  "SDM_GRFC_3",
-			  "",
-			  "H1_AP_INT_ODL",
-			  "QLINK_REQ",
-			  "QLINK_EN",
-			  "SDM_GRFC_2",
-			  "BOOT_CONFIG_3",
-			  "WMSS_RESET_L",
-			  "SDM_GRFC_0",
-			  "SDM_GRFC_1",
-			  "RFFE3_DATA",
-			  "RFFE3_CLK",
-			  "RFFE4_DATA",
-			  "RFFE4_CLK",
-			  "RFFE5_DATA",
-			  "RFFE5_CLK",
-			  "GNSS_EN",
-			  "WCI2_LTE_COEX_RXD",
-			  "WCI2_LTE_COEX_TXD",
-			  "AP_RAM_ID1",
-			  "AP_RAM_ID2",
-			  "RFFE1_DATA",
-			  "RFFE1_CLK";
-};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts b/arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts
deleted file mode 100644
index 2b7230594ecb..000000000000
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza-r2.dts
+++ /dev/null
@@ -1,238 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Google Cheza board device tree source
- *
- * Copyright 2018 Google LLC.
- */
-
-/dts-v1/;
-
-#include "sdm845-cheza.dtsi"
-
-/ {
-	model = "Google Cheza (rev2)";
-	compatible = "google,cheza-rev2", "qcom,sdm845";
-
-	/*
-	 * FIXED REGULATORS (not in sdm845-cheza.dtsi) - parents above children
-	 */
-
-	/*
-	 * NOTE: Technically pp3500_a is not the exact same signal as
-	 * pp3500_a_vbob (there's a load switch between them and the EC can
-	 * control pp3500_a via "en_pp3300_a"), but from the AP's point of
-	 * view they are the same.
-	 */
-	pp3500_a:
-	pp3500_a_vbob: pp3500-a-vbob-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "vreg_bob";
-
-		/*
-		 * Comes on automatically when pp5000_ldo comes on, which
-		 * comes on automatically when ppvar_sys comes on
-		 */
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3500000>;
-		regulator-max-microvolt = <3500000>;
-
-		vin-supply = <&ppvar_sys>;
-	};
-
-	pp3300_dx_edp: pp3300-dx-edp-regulator {
-		/* Yes, it's really 3.5 despite the name of the signal */
-		regulator-min-microvolt = <3500000>;
-		regulator-max-microvolt = <3500000>;
-
-		vin-supply = <&pp3500_a>;
-	};
-};
-
-/* FIXED REGULATOR OVERRIDES (modifications to sdm845-cheza.dtsi) */
-
-/*
- * L19 and L28 technically go to 3.3V, but most boards have old AOP firmware
- * that limits them to 3.0, and trying to run at 3.3V with that old firmware
- * prevents the system from booting.
- */
-&src_pp3000_l19a {
-	regulator-min-microvolt = <3008000>;
-	regulator-max-microvolt = <3008000>;
-};
-
-&src_pp3300_l22a {
-	/delete-property/regulator-boot-on;
-	/delete-property/regulator-always-on;
-};
-
-&src_pp3300_l28a {
-	regulator-min-microvolt = <3008000>;
-	regulator-max-microvolt = <3008000>;
-};
-
-&src_vreg_bob {
-	regulator-min-microvolt = <3500000>;
-	regulator-max-microvolt = <3500000>;
-	vin-supply = <&pp3500_a_vbob>;
-};
-
-/*
- * NON-REGULATOR OVERRIDES
- * (modifications to sdm845-cheza.dtsi) - alphabetized by dtsi label
- */
-
-/* PINCTRL - board-specific pinctrl */
-
-&tlmm {
-	gpio-line-names = "AP_SPI_FP_MISO",
-			  "AP_SPI_FP_MOSI",
-			  "AP_SPI_FP_CLK",
-			  "AP_SPI_FP_CS_L",
-			  "UART_AP_TX_DBG_RX",
-			  "UART_DBG_TX_AP_RX",
-			  "BRIJ_SUSPEND",
-			  "FP_RST_L",
-			  "FCAM_EN",
-			  "",
-			  "EDP_BRIJ_IRQ",
-			  "EC_IN_RW_ODL",
-			  "",
-			  "RCAM_MCLK",
-			  "FCAM_MCLK",
-			  "",
-			  "RCAM_EN",
-			  "CCI0_SDA",
-			  "CCI0_SCL",
-			  "CCI1_SDA",
-			  "CCI1_SCL",
-			  "FCAM_RST_L",
-			  "FPMCU_BOOT0",
-			  "PEN_RST_L",
-			  "PEN_IRQ_L",
-			  "FPMCU_SEL_OD",
-			  "RCAM_VSYNC",
-			  "ESIM_MISO",
-			  "ESIM_MOSI",
-			  "ESIM_CLK",
-			  "ESIM_CS_L",
-			  "AP_PEN_1V8_SDA",
-			  "AP_PEN_1V8_SCL",
-			  "AP_TS_I2C_SDA",
-			  "AP_TS_I2C_SCL",
-			  "RCAM_RST_L",
-			  "",
-			  "AP_EDP_BKLTEN",
-			  "AP_BRD_ID1",
-			  "BOOT_CONFIG_4",
-			  "AMP_IRQ_L",
-			  "EDP_BRIJ_I2C_SDA",
-			  "EDP_BRIJ_I2C_SCL",
-			  "EN_PP3300_DX_EDP",
-			  "SD_CD_ODL",
-			  "BT_UART_RTS",
-			  "BT_UART_CTS",
-			  "BT_UART_RXD",
-			  "BT_UART_TXD",
-			  "AMP_I2C_SDA",
-			  "AMP_I2C_SCL",
-			  "AP_BRD_ID3",
-			  "",
-			  "AP_EC_SPI_CLK",
-			  "AP_EC_SPI_CS_L",
-			  "AP_EC_SPI_MISO",
-			  "AP_EC_SPI_MOSI",
-			  "FORCED_USB_BOOT",
-			  "AMP_BCLK",
-			  "AMP_LRCLK",
-			  "AMP_DOUT",
-			  "AMP_DIN",
-			  "AP_BRD_ID2",
-			  "PEN_PDCT_L",
-			  "HP_MCLK",
-			  "HP_BCLK",
-			  "HP_LRCLK",
-			  "HP_DOUT",
-			  "HP_DIN",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "BT_SLIMBUS_DATA",
-			  "BT_SLIMBUS_CLK",
-			  "AMP_RESET_L",
-			  "",
-			  "FCAM_VSYNC",
-			  "",
-			  "AP_SKU_ID1",
-			  "EC_WOV_BCLK",
-			  "EC_WOV_LRCLK",
-			  "EC_WOV_DOUT",
-			  "",
-			  "",
-			  "AP_H1_SPI_MISO",
-			  "AP_H1_SPI_MOSI",
-			  "AP_H1_SPI_CLK",
-			  "AP_H1_SPI_CS_L",
-			  "",
-			  "AP_SPI_CS0_L",
-			  "AP_SPI_MOSI",
-			  "AP_SPI_MISO",
-			  "",
-			  "",
-			  "AP_SPI_CLK",
-			  "",
-			  "RFFE6_CLK",
-			  "RFFE6_DATA",
-			  "BOOT_CONFIG_1",
-			  "BOOT_CONFIG_2",
-			  "BOOT_CONFIG_0",
-			  "EDP_BRIJ_EN",
-			  "",
-			  "USB_HS_TX_EN",
-			  "UIM2_DATA",
-			  "UIM2_CLK",
-			  "UIM2_RST",
-			  "UIM2_PRESENT",
-			  "UIM1_DATA",
-			  "UIM1_CLK",
-			  "UIM1_RST",
-			  "",
-			  "AP_SKU_ID2",
-			  "SDM_GRFC_8",
-			  "SDM_GRFC_9",
-			  "AP_RST_REQ",
-			  "HP_IRQ",
-			  "TS_RESET_L",
-			  "PEN_EJECT_ODL",
-			  "HUB_RST_L",
-			  "FP_TO_AP_IRQ",
-			  "AP_EC_INT_L",
-			  "",
-			  "",
-			  "TS_INT_L",
-			  "AP_SUSPEND_L",
-			  "SDM_GRFC_3",
-			  "",
-			  "H1_AP_INT_ODL",
-			  "QLINK_REQ",
-			  "QLINK_EN",
-			  "SDM_GRFC_2",
-			  "BOOT_CONFIG_3",
-			  "WMSS_RESET_L",
-			  "SDM_GRFC_0",
-			  "SDM_GRFC_1",
-			  "RFFE3_DATA",
-			  "RFFE3_CLK",
-			  "RFFE4_DATA",
-			  "RFFE4_CLK",
-			  "RFFE5_DATA",
-			  "RFFE5_CLK",
-			  "GNSS_EN",
-			  "WCI2_LTE_COEX_RXD",
-			  "WCI2_LTE_COEX_TXD",
-			  "AP_RAM_ID1",
-			  "AP_RAM_ID2",
-			  "RFFE1_DATA",
-			  "RFFE1_CLK";
-};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dts b/arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dts
deleted file mode 100644
index 1ba67be08f81..000000000000
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza-r3.dts
+++ /dev/null
@@ -1,174 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Google Cheza board device tree source
- *
- * Copyright 2018 Google LLC.
- */
-
-/dts-v1/;
-
-#include "sdm845-cheza.dtsi"
-
-/ {
-	model = "Google Cheza (rev3+)";
-	compatible = "google,cheza", "qcom,sdm845";
-};
-
-/* PINCTRL - board-specific pinctrl */
-
-&tlmm {
-	gpio-line-names = "AP_SPI_FP_MISO",
-			  "AP_SPI_FP_MOSI",
-			  "AP_SPI_FP_CLK",
-			  "AP_SPI_FP_CS_L",
-			  "UART_AP_TX_DBG_RX",
-			  "UART_DBG_TX_AP_RX",
-			  "BRIJ_SUSPEND",
-			  "FP_RST_L",
-			  "FCAM_EN",
-			  "",
-			  "EDP_BRIJ_IRQ",
-			  "EC_IN_RW_ODL",
-			  "",
-			  "RCAM_MCLK",
-			  "FCAM_MCLK",
-			  "",
-			  "RCAM_EN",
-			  "CCI0_SDA",
-			  "CCI0_SCL",
-			  "CCI1_SDA",
-			  "CCI1_SCL",
-			  "FCAM_RST_L",
-			  "FPMCU_BOOT0",
-			  "PEN_RST_L",
-			  "PEN_IRQ_L",
-			  "FPMCU_SEL_OD",
-			  "RCAM_VSYNC",
-			  "ESIM_MISO",
-			  "ESIM_MOSI",
-			  "ESIM_CLK",
-			  "ESIM_CS_L",
-			  "AP_PEN_1V8_SDA",
-			  "AP_PEN_1V8_SCL",
-			  "AP_TS_I2C_SDA",
-			  "AP_TS_I2C_SCL",
-			  "RCAM_RST_L",
-			  "",
-			  "AP_EDP_BKLTEN",
-			  "AP_BRD_ID0",
-			  "BOOT_CONFIG_4",
-			  "AMP_IRQ_L",
-			  "EDP_BRIJ_I2C_SDA",
-			  "EDP_BRIJ_I2C_SCL",
-			  "EN_PP3300_DX_EDP",
-			  "SD_CD_ODL",
-			  "BT_UART_RTS",
-			  "BT_UART_CTS",
-			  "BT_UART_RXD",
-			  "BT_UART_TXD",
-			  "AMP_I2C_SDA",
-			  "AMP_I2C_SCL",
-			  "AP_BRD_ID2",
-			  "",
-			  "AP_EC_SPI_CLK",
-			  "AP_EC_SPI_CS_L",
-			  "AP_EC_SPI_MISO",
-			  "AP_EC_SPI_MOSI",
-			  "FORCED_USB_BOOT",
-			  "AMP_BCLK",
-			  "AMP_LRCLK",
-			  "AMP_DOUT",
-			  "AMP_DIN",
-			  "AP_BRD_ID1",
-			  "PEN_PDCT_L",
-			  "HP_MCLK",
-			  "HP_BCLK",
-			  "HP_LRCLK",
-			  "HP_DOUT",
-			  "HP_DIN",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "BT_SLIMBUS_DATA",
-			  "BT_SLIMBUS_CLK",
-			  "AMP_RESET_L",
-			  "",
-			  "FCAM_VSYNC",
-			  "",
-			  "AP_SKU_ID0",
-			  "EC_WOV_BCLK",
-			  "EC_WOV_LRCLK",
-			  "EC_WOV_DOUT",
-			  "",
-			  "",
-			  "AP_H1_SPI_MISO",
-			  "AP_H1_SPI_MOSI",
-			  "AP_H1_SPI_CLK",
-			  "AP_H1_SPI_CS_L",
-			  "",
-			  "AP_SPI_CS0_L",
-			  "AP_SPI_MOSI",
-			  "AP_SPI_MISO",
-			  "",
-			  "",
-			  "AP_SPI_CLK",
-			  "",
-			  "RFFE6_CLK",
-			  "RFFE6_DATA",
-			  "BOOT_CONFIG_1",
-			  "BOOT_CONFIG_2",
-			  "BOOT_CONFIG_0",
-			  "EDP_BRIJ_EN",
-			  "",
-			  "USB_HS_TX_EN",
-			  "UIM2_DATA",
-			  "UIM2_CLK",
-			  "UIM2_RST",
-			  "UIM2_PRESENT",
-			  "UIM1_DATA",
-			  "UIM1_CLK",
-			  "UIM1_RST",
-			  "",
-			  "AP_SKU_ID1",
-			  "SDM_GRFC_8",
-			  "SDM_GRFC_9",
-			  "AP_RST_REQ",
-			  "HP_IRQ",
-			  "TS_RESET_L",
-			  "PEN_EJECT_ODL",
-			  "HUB_RST_L",
-			  "FP_TO_AP_IRQ",
-			  "AP_EC_INT_L",
-			  "",
-			  "",
-			  "TS_INT_L",
-			  "AP_SUSPEND_L",
-			  "SDM_GRFC_3",
-			  /*
-			   * AP_FLASH_WP_L is crossystem ABI. Rev3 schematics
-			   * call it BIOS_FLASH_WP_R_L.
-			   */
-			  "AP_FLASH_WP_L",
-			  "H1_AP_INT_ODL",
-			  "QLINK_REQ",
-			  "QLINK_EN",
-			  "SDM_GRFC_2",
-			  "BOOT_CONFIG_3",
-			  "WMSS_RESET_L",
-			  "SDM_GRFC_0",
-			  "SDM_GRFC_1",
-			  "RFFE3_DATA",
-			  "RFFE3_CLK",
-			  "RFFE4_DATA",
-			  "RFFE4_CLK",
-			  "RFFE5_DATA",
-			  "RFFE5_CLK",
-			  "GNSS_EN",
-			  "WCI2_LTE_COEX_RXD",
-			  "WCI2_LTE_COEX_TXD",
-			  "AP_RAM_ID0",
-			  "AP_RAM_ID1",
-			  "RFFE1_DATA",
-			  "RFFE1_CLK";
-};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi b/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
deleted file mode 100644
index b7e514f81f92..000000000000
--- a/arch/arm64/boot/dts/qcom/sdm845-cheza.dtsi
+++ /dev/null
@@ -1,1330 +0,0 @@
-// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
-/*
- * Google Cheza device tree source (common between revisions)
- *
- * Copyright 2018 Google LLC.
- */
-
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-#include "sdm845.dtsi"
-
-/* PMICs depend on spmi_bus label and so must come after SoC */
-#include "pm8005.dtsi"
-#include "pm8998.dtsi"
-
-/ {
-	aliases {
-		bluetooth0 = &bluetooth;
-		serial1 = &uart6;
-		serial0 = &uart9;
-		wifi0 = &wifi;
-	};
-
-	chosen {
-		stdout-path = "serial0:115200n8";
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&cros_ec_pwm 0>;
-		enable-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
-		power-supply = <&ppvar_sys>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&ap_edp_bklten>;
-	};
-
-	/* FIXED REGULATORS - parents above children */
-
-	/* This is the top level supply and variable voltage */
-	ppvar_sys: ppvar-sys-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "ppvar_sys";
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	/* This divides ppvar_sys by 2, so voltage is variable */
-	src_vph_pwr: src-vph-pwr-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "src_vph_pwr";
-
-		/* EC turns on with switchcap_on_l; always on for AP */
-		regulator-always-on;
-		regulator-boot-on;
-
-		vin-supply = <&ppvar_sys>;
-	};
-
-	pp5000_a: pp5000-a-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "pp5000_a";
-
-		/* EC turns on with en_pp5000_a; always on for AP */
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-
-		vin-supply = <&ppvar_sys>;
-	};
-
-	src_vreg_bob: src-vreg-bob-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "src_vreg_bob";
-
-		/* EC turns on with vbob_en; always on for AP */
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3600000>;
-		regulator-max-microvolt = <3600000>;
-
-		vin-supply = <&ppvar_sys>;
-	};
-
-	pp3300_dx_edp: pp3300-dx-edp-regulator {
-		compatible = "regulator-fixed";
-		regulator-name = "pp3300_dx_edp";
-
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&tlmm 43 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-		pinctrl-names = "default";
-		pinctrl-0 = <&en_pp3300_dx_edp>;
-	};
-
-	/*
-	 * Apparently RPMh does not provide support for PM8998 S4 because it
-	 * is always-on; model it as a fixed regulator.
-	 */
-	src_pp1800_s4a: pm8998-smps4 {
-		compatible = "regulator-fixed";
-		regulator-name = "src_pp1800_s4a";
-
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-
-		regulator-always-on;
-		regulator-boot-on;
-
-		vin-supply = <&src_vph_pwr>;
-	};
-
-	/* BOARD-SPECIFIC TOP LEVEL NODES */
-
-	gpio-keys {
-		compatible = "gpio-keys";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pen_eject_odl>;
-
-		switch-pen-insert {
-			label = "Pen Insert";
-			/* Insert = low, eject = high */
-			gpios = <&tlmm 119 GPIO_ACTIVE_LOW>;
-			linux,code = <SW_PEN_INSERTED>;
-			linux,input-type = <EV_SW>;
-			wakeup-source;
-		};
-	};
-
-	panel: panel {
-		compatible = "innolux,p120zdg-bf1";
-		power-supply = <&pp3300_dx_edp>;
-		backlight = <&backlight>;
-		no-hpd;
-
-		panel_in: port {
-			panel_in_edp: endpoint {
-				remote-endpoint = <&sn65dsi86_out>;
-			};
-		};
-	};
-};
-
-&cpufreq_hw {
-	/delete-property/ interrupts-extended; /* reference to lmh_cluster[01] */
-};
-
-&psci {
-	/delete-node/ power-domain-cpu0;
-	/delete-node/ power-domain-cpu1;
-	/delete-node/ power-domain-cpu2;
-	/delete-node/ power-domain-cpu3;
-	/delete-node/ power-domain-cpu4;
-	/delete-node/ power-domain-cpu5;
-	/delete-node/ power-domain-cpu6;
-	/delete-node/ power-domain-cpu7;
-	/delete-node/ power-domain-cluster;
-};
-
-&cpus {
-	/delete-node/ domain-idle-states;
-};
-
-&cpu_idle_states {
-	little_cpu_sleep_0: cpu-sleep-0-0 {
-		compatible = "arm,idle-state";
-		idle-state-name = "little-power-down";
-		arm,psci-suspend-param = <0x40000003>;
-		entry-latency-us = <350>;
-		exit-latency-us = <461>;
-		min-residency-us = <1890>;
-		local-timer-stop;
-	};
-
-	little_cpu_sleep_1: cpu-sleep-0-1 {
-		compatible = "arm,idle-state";
-		idle-state-name = "little-rail-power-down";
-		arm,psci-suspend-param = <0x40000004>;
-		entry-latency-us = <360>;
-		exit-latency-us = <531>;
-		min-residency-us = <3934>;
-		local-timer-stop;
-	};
-
-	big_cpu_sleep_0: cpu-sleep-1-0 {
-		compatible = "arm,idle-state";
-		idle-state-name = "big-power-down";
-		arm,psci-suspend-param = <0x40000003>;
-		entry-latency-us = <264>;
-		exit-latency-us = <621>;
-		min-residency-us = <952>;
-		local-timer-stop;
-	};
-
-	big_cpu_sleep_1: cpu-sleep-1-1 {
-		compatible = "arm,idle-state";
-		idle-state-name = "big-rail-power-down";
-		arm,psci-suspend-param = <0x40000004>;
-		entry-latency-us = <702>;
-		exit-latency-us = <1061>;
-		min-residency-us = <4488>;
-		local-timer-stop;
-	};
-
-	cluster_sleep_0: cluster-sleep-0 {
-		compatible = "arm,idle-state";
-		idle-state-name = "cluster-power-down";
-		arm,psci-suspend-param = <0x400000F4>;
-		entry-latency-us = <3263>;
-		exit-latency-us = <6562>;
-		min-residency-us = <9987>;
-		local-timer-stop;
-	};
-};
-
-&cpu0 {
-	/delete-property/ power-domains;
-	/delete-property/ power-domain-names;
-	cpu-idle-states = <&little_cpu_sleep_0
-			   &little_cpu_sleep_1
-			   &cluster_sleep_0>;
-};
-
-&cpu1 {
-	/delete-property/ power-domains;
-	/delete-property/ power-domain-names;
-	cpu-idle-states = <&little_cpu_sleep_0
-			   &little_cpu_sleep_1
-			   &cluster_sleep_0>;
-};
-
-&cpu2 {
-	/delete-property/ power-domains;
-	/delete-property/ power-domain-names;
-	cpu-idle-states = <&little_cpu_sleep_0
-			   &little_cpu_sleep_1
-			   &cluster_sleep_0>;
-};
-
-&cpu3 {
-	/delete-property/ power-domains;
-	/delete-property/ power-domain-names;
-	cpu-idle-states = <&little_cpu_sleep_0
-			   &little_cpu_sleep_1
-			   &cluster_sleep_0>;
-};
-
-&cpu4 {
-	/delete-property/ power-domains;
-	/delete-property/ power-domain-names;
-	cpu-idle-states = <&big_cpu_sleep_0
-			   &big_cpu_sleep_1
-			   &cluster_sleep_0>;
-};
-
-&cpu5 {
-	/delete-property/ power-domains;
-	/delete-property/ power-domain-names;
-	cpu-idle-states = <&big_cpu_sleep_0
-			   &big_cpu_sleep_1
-			   &cluster_sleep_0>;
-};
-
-&cpu6 {
-	/delete-property/ power-domains;
-	/delete-property/ power-domain-names;
-	cpu-idle-states = <&big_cpu_sleep_0
-			   &big_cpu_sleep_1
-			   &cluster_sleep_0>;
-};
-
-&cpu7 {
-	/delete-property/ power-domains;
-	/delete-property/ power-domain-names;
-	cpu-idle-states = <&big_cpu_sleep_0
-			   &big_cpu_sleep_1
-			   &cluster_sleep_0>;
-};
-
-&lmh_cluster0 {
-	status = "disabled";
-};
-
-&lmh_cluster1 {
-	status = "disabled";
-};
-
-/*
- * Reserved memory changes
- *
- * Putting this all together (out of order with the rest of the file) to keep
- * all modifications to the memory map (from sdm845.dtsi) in one place.
- */
-
-/*
- * Our mpss_region is 8MB bigger than the default one and that conflicts
- * with venus_mem and cdsp_mem.
- *
- * For venus_mem we'll delete and re-create at a different address.
- *
- * cdsp_mem isn't used on cheza right now so we won't bother re-creating it; but
- * that also means we need to delete cdsp_pas.
- */
-/delete-node/ &venus_mem;
-/delete-node/ &cdsp_mem;
-/delete-node/ &cdsp_pas;
-/delete-node/ &gpu_mem;
-
-/* Increase the size from 120 MB to 128 MB */
-&mpss_region {
-	reg = <0 0x8e000000 0 0x8000000>;
-};
-
-/* Increase the size from 2MB to 8MB */
-&rmtfs_mem {
-	reg = <0 0x88f00000 0 0x800000>;
-};
-
-/ {
-	reserved-memory {
-		venus_mem: memory@96000000 {
-			reg = <0 0x96000000 0 0x500000>;
-			no-map;
-		};
-	};
-};
-
-&qspi {
-	status = "okay";
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&qspi_clk>, <&qspi_cs0>, <&qspi_data0>, <&qspi_data1>;
-	pinctrl-1 = <&qspi_sleep>;
-
-	flash@0 {
-		compatible = "jedec,spi-nor";
-		reg = <0>;
-
-		/*
-		 * In theory chip supports up to 104 MHz and controller up
-		 * to 80 MHz, but above 25 MHz wasn't reliable so we'll use
-		 * that for now.  b:117440651
-		 */
-		spi-max-frequency = <25000000>;
-		spi-tx-bus-width = <2>;
-		spi-rx-bus-width = <2>;
-	};
-};
-
-
-&apps_rsc {
-	/delete-property/ power-domains;
-
-	regulators-0 {
-		compatible = "qcom,pm8998-rpmh-regulators";
-		qcom,pmic-id = "a";
-
-		vdd-s1-supply = <&src_vph_pwr>;
-		vdd-s2-supply = <&src_vph_pwr>;
-		vdd-s3-supply = <&src_vph_pwr>;
-		vdd-s4-supply = <&src_vph_pwr>;
-		vdd-s5-supply = <&src_vph_pwr>;
-		vdd-s6-supply = <&src_vph_pwr>;
-		vdd-s7-supply = <&src_vph_pwr>;
-		vdd-s8-supply = <&src_vph_pwr>;
-		vdd-s9-supply = <&src_vph_pwr>;
-		vdd-s10-supply = <&src_vph_pwr>;
-		vdd-s11-supply = <&src_vph_pwr>;
-		vdd-s12-supply = <&src_vph_pwr>;
-		vdd-s13-supply = <&src_vph_pwr>;
-		vdd-l1-l27-supply = <&src_pp1025_s7a>;
-		vdd-l2-l8-l17-supply = <&src_pp1350_s3a>;
-		vdd-l3-l11-supply = <&src_pp1025_s7a>;
-		vdd-l4-l5-supply = <&src_pp1025_s7a>;
-		vdd-l6-supply = <&src_vph_pwr>;
-		vdd-l7-l12-l14-l15-supply = <&src_pp2040_s5a>;
-		vdd-l9-supply = <&src_pp2040_s5a>;
-		vdd-l10-l23-l25-supply = <&src_vreg_bob>;
-		vdd-l13-l19-l21-supply = <&src_vreg_bob>;
-		vdd-l16-l28-supply = <&src_vreg_bob>;
-		vdd-l18-l22-supply = <&src_vreg_bob>;
-		vdd-l20-l24-supply = <&src_vreg_bob>;
-		vdd-l26-supply = <&src_pp1350_s3a>;
-		vin-lvs-1-2-supply = <&src_pp1800_s4a>;
-
-		src_pp1125_s2a: smps2 {
-			regulator-min-microvolt = <1100000>;
-			regulator-max-microvolt = <1100000>;
-		};
-
-		src_pp1350_s3a: smps3 {
-			regulator-min-microvolt = <1352000>;
-			regulator-max-microvolt = <1352000>;
-		};
-
-		src_pp2040_s5a: smps5 {
-			regulator-min-microvolt = <1904000>;
-			regulator-max-microvolt = <2040000>;
-		};
-
-		src_pp1025_s7a: smps7 {
-			regulator-min-microvolt = <900000>;
-			regulator-max-microvolt = <1028000>;
-		};
-
-		vdd_qusb_hs0:
-		vdda_hp_pcie_core:
-		vdda_mipi_csi0_0p9:
-		vdda_mipi_csi1_0p9:
-		vdda_mipi_csi2_0p9:
-		vdda_mipi_dsi0_pll:
-		vdda_mipi_dsi1_pll:
-		vdda_qlink_lv:
-		vdda_qlink_lv_ck:
-		vdda_qrefs_0p875:
-		vdda_pcie_core:
-		vdda_pll_cc_ebi01:
-		vdda_pll_cc_ebi23:
-		vdda_sp_sensor:
-		vdda_ufs1_core:
-		vdda_ufs2_core:
-		vdda_usb1_ss_core:
-		vdda_usb2_ss_core:
-		src_pp875_l1a: ldo1 {
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <880000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vddpx_10:
-		src_pp1200_l2a: ldo2 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-
-			/* TODO: why??? */
-			regulator-always-on;
-		};
-
-		pp1000_l3a_sdr845: ldo3 {
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1000000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vdd_wcss_cx:
-		vdd_wcss_mx:
-		vdda_wcss_pll:
-		src_pp800_l5a: ldo5 {
-			regulator-min-microvolt = <800000>;
-			regulator-max-microvolt = <800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vddpx_13:
-		src_pp1800_l6a: ldo6 {
-			regulator-min-microvolt = <1856000>;
-			regulator-max-microvolt = <1856000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pp1800_l7a_wcn3990: ldo7 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		src_pp1200_l8a: ldo8 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1248000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pp1800_dx_pen:
-		src_pp1800_l9a: ldo9 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		src_pp1800_l10a: ldo10 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pp1000_l11a_sdr845: ldo11 {
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1048000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vdd_qfprom:
-		vdd_qfprom_sp:
-		vdda_apc1_cs_1p8:
-		vdda_gfx_cs_1p8:
-		vdda_qrefs_1p8:
-		vdda_qusb_hs0_1p8:
-		vddpx_11:
-		src_pp1800_l12a: ldo12 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vddpx_2:
-		src_pp2950_l13a: ldo13 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		src_pp1800_l14a: ldo14 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		src_pp1800_l15a: ldo15 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pp2700_l16a: ldo16 {
-			regulator-min-microvolt = <2704000>;
-			regulator-max-microvolt = <2704000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		src_pp1300_l17a: ldo17 {
-			regulator-min-microvolt = <1304000>;
-			regulator-max-microvolt = <1304000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pp2700_l18a: ldo18 {
-			regulator-min-microvolt = <2704000>;
-			regulator-max-microvolt = <2960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		/*
-		 * NOTE: this rail should have been called
-		 * src_pp3300_l19a in the schematic
-		 */
-		src_pp3000_l19a: ldo19 {
-			regulator-min-microvolt = <3304000>;
-			regulator-max-microvolt = <3304000>;
-
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		src_pp2950_l20a: ldo20 {
-			regulator-min-microvolt = <2704000>;
-			regulator-max-microvolt = <2960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		src_pp2950_l21a: ldo21 {
-			regulator-min-microvolt = <2704000>;
-			regulator-max-microvolt = <2960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pp3300_hub:
-		src_pp3300_l22a: ldo22 {
-			regulator-min-microvolt = <3304000>;
-			regulator-max-microvolt = <3304000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			/*
-			 * HACK: Should add a usb hub node and driver
-			 * to turn this on and off at suspend/resume time
-			 */
-			regulator-boot-on;
-			regulator-always-on;
-		};
-
-		pp3300_l23a_ch1_wcn3990: ldo23 {
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3312000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vdda_qusb_hs0_3p1:
-		src_pp3075_l24a: ldo24 {
-			regulator-min-microvolt = <3088000>;
-			regulator-max-microvolt = <3088000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pp3300_l25a_ch0_wcn3990: ldo25 {
-			regulator-min-microvolt = <3304000>;
-			regulator-max-microvolt = <3304000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pp1200_hub:
-		vdda_hp_pcie_1p2:
-		vdda_hv_ebi0:
-		vdda_hv_ebi1:
-		vdda_hv_ebi2:
-		vdda_hv_ebi3:
-		vdda_mipi_csi_1p25:
-		vdda_mipi_dsi0_1p2:
-		vdda_mipi_dsi1_1p2:
-		vdda_pcie_1p2:
-		vdda_ufs1_1p2:
-		vdda_ufs2_1p2:
-		vdda_usb1_ss_1p2:
-		vdda_usb2_ss_1p2:
-		src_pp1200_l26a: ldo26 {
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		pp3300_dx_pen:
-		src_pp3300_l28a: ldo28 {
-			regulator-min-microvolt = <3304000>;
-			regulator-max-microvolt = <3304000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		src_pp1800_lvs1: lvs1 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-
-		src_pp1800_lvs2: lvs2 {
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-		};
-	};
-
-	regulators-1 {
-		compatible = "qcom,pm8005-rpmh-regulators";
-		qcom,pmic-id = "c";
-
-		vdd-s1-supply = <&src_vph_pwr>;
-		vdd-s2-supply = <&src_vph_pwr>;
-		vdd-s3-supply = <&src_vph_pwr>;
-		vdd-s4-supply = <&src_vph_pwr>;
-
-		src_pp600_s3c: smps3 {
-			regulator-min-microvolt = <600000>;
-			regulator-max-microvolt = <600000>;
-		};
-	};
-};
-
-edp_brij_i2c: &i2c3 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	sn65dsi86_bridge: bridge@2d {
-		compatible = "ti,sn65dsi86";
-		reg = <0x2d>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&edp_brij_en &edp_brij_irq>;
-
-		interrupt-parent = <&tlmm>;
-		interrupts = <10 IRQ_TYPE_LEVEL_HIGH>;
-
-		enable-gpios = <&tlmm 102 GPIO_ACTIVE_HIGH>;
-
-		vpll-supply = <&src_pp1800_s4a>;
-		vccio-supply = <&src_pp1800_s4a>;
-		vcca-supply = <&src_pp1200_l2a>;
-		vcc-supply = <&src_pp1200_l2a>;
-
-		clocks = <&rpmhcc RPMH_LN_BB_CLK2>;
-		clock-names = "refclk";
-
-		no-hpd;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-				sn65dsi86_in: endpoint {
-					remote-endpoint = <&mdss_dsi0_out>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-				sn65dsi86_out: endpoint {
-					remote-endpoint = <&panel_in_edp>;
-				};
-			};
-		};
-	};
-};
-
-ap_pen_1v8: &i2c11 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	digitizer@9 {
-		compatible = "wacom,w9013", "hid-over-i2c";
-		reg = <0x9>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pen_irq_l>, <&pen_pdct_l>, <&pen_rst_l>;
-
-		vdd-supply = <&pp3300_dx_pen>;
-		vddl-supply = <&pp1800_dx_pen>;
-		post-power-on-delay-ms = <100>;
-
-		interrupt-parent = <&tlmm>;
-		interrupts = <24 IRQ_TYPE_LEVEL_LOW>;
-
-		hid-descr-addr = <0x1>;
-	};
-};
-
-amp_i2c: &i2c12 {
-	status = "okay";
-	clock-frequency = <400000>;
-};
-
-ap_ts_i2c: &i2c14 {
-	status = "okay";
-	clock-frequency = <400000>;
-
-	touchscreen@10 {
-		compatible = "elan,ekth3500";
-		reg = <0x10>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&ts_int_l &ts_reset_l>;
-
-		interrupt-parent = <&tlmm>;
-		interrupts = <125 IRQ_TYPE_LEVEL_LOW>;
-
-		vcc33-supply = <&src_pp3300_l28a>;
-
-		reset-gpios = <&tlmm 118 GPIO_ACTIVE_LOW>;
-	};
-};
-
-&gpu {
-	status = "okay";
-};
-
-&ipa {
-	qcom,gsi-loader = "modem";
-	status = "okay";
-};
-
-&lpasscc {
-	status = "okay";
-};
-
-&mdss {
-	status = "okay";
-};
-
-&mdss_dsi0 {
-	status = "okay";
-	vdda-supply = <&vdda_mipi_dsi0_1p2>;
-
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&sn65dsi86_in>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
-};
-
-&mdss_dsi0_phy {
-	status = "okay";
-	vdds-supply = <&vdda_mipi_dsi0_pll>;
-};
-
-/*
- * Cheza fw does not properly program the GPU aperture to allow the
- * GPU to update the SMMU pagetables for context switches.  Work
- * around this by dropping the "qcom,adreno-smmu" compat string.
- */
-&adreno_smmu {
-	compatible = "qcom,sdm845-smmu-v2", "qcom,smmu-v2";
-};
-
-&mss_pil {
-	status = "okay";
-
-	iommus = <&apps_smmu 0x781 0x0>,
-		 <&apps_smmu 0x724 0x3>;
-};
-
-&pm8998_pwrkey {
-	status = "disabled";
-};
-
-&qupv3_id_0 {
-	status = "okay";
-	iommus = <&apps_smmu 0x0 0x3>;
-};
-
-&qupv3_id_1 {
-	status = "okay";
-	iommus = <&apps_smmu 0x6c0 0x3>;
-};
-
-&sdhc_2 {
-	status = "okay";
-
-	pinctrl-names = "default";
-	pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_cd_odl>;
-
-	vmmc-supply = <&src_pp2950_l21a>;
-	vqmmc-supply = <&vddpx_2>;
-
-	cd-gpios = <&tlmm 44 GPIO_ACTIVE_LOW>;
-};
-
-&spi0 {
-	status = "okay";
-};
-
-&spi5 {
-	status = "okay";
-
-	tpm@0 {
-		compatible = "google,cr50";
-		reg = <0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&h1_ap_int_odl>;
-		spi-max-frequency = <800000>;
-		interrupt-parent = <&tlmm>;
-		interrupts = <129 IRQ_TYPE_EDGE_RISING>;
-	};
-};
-
-&spi10 {
-	status = "okay";
-
-	cros_ec: ec@0 {
-		compatible = "google,cros-ec-spi";
-		reg = <0>;
-		interrupt-parent = <&tlmm>;
-		interrupts = <122 IRQ_TYPE_LEVEL_LOW>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&ec_ap_int_l>;
-		spi-max-frequency = <3000000>;
-		wakeup-source;
-
-		cros_ec_pwm: pwm {
-			compatible = "google,cros-ec-pwm";
-			#pwm-cells = <1>;
-		};
-
-		i2c_tunnel: i2c-tunnel {
-			compatible = "google,cros-ec-i2c-tunnel";
-			google,remote-bus = <0>;
-			#address-cells = <1>;
-			#size-cells = <0>;
-		};
-	};
-};
-
-#include <arm/cros-ec-keyboard.dtsi>
-#include <arm/cros-ec-sbs.dtsi>
-
-&uart6 {
-	status = "okay";
-
-	pinctrl-0 = <&qup_uart6_4pin>;
-
-	bluetooth: bluetooth {
-		compatible = "qcom,wcn3990-bt";
-		vddio-supply = <&src_pp1800_s4a>;
-		vddxo-supply = <&pp1800_l7a_wcn3990>;
-		vddrf-supply = <&src_pp1300_l17a>;
-		vddch0-supply = <&pp3300_l25a_ch0_wcn3990>;
-		max-speed = <3200000>;
-	};
-};
-
-&uart9 {
-	status = "okay";
-};
-
-&ufs_mem_hc {
-	status = "okay";
-
-	reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
-
-	vcc-supply = <&src_pp2950_l20a>;
-	vcc-max-microamp = <600000>;
-};
-
-&ufs_mem_phy {
-	status = "okay";
-
-	vdda-phy-supply = <&vdda_ufs1_core>;
-	vdda-pll-supply = <&vdda_ufs1_1p2>;
-};
-
-&usb_1 {
-	status = "okay";
-
-	/* We'll use this as USB 2.0 only */
-	qcom,select-utmi-as-pipe-clk;
-};
-
-&usb_1_dwc3 {
-	/*
-	 * The hardware design intends this port to be hooked up in peripheral
-	 * mode, so we'll hardcode it here.  Some details:
-	 * - SDM845 expects only a single Type C connector so it has only one
-	 *   native Type C port but cheza has two Type C connectors.
-	 * - The only source of DP is the single native Type C port.
-	 * - On cheza we want to be able to hook DP up to _either_ of the
-	 *   two Type C connectors and want to be able to achieve 4 lanes of DP.
-	 * - When you configure a Type C port for 4 lanes of DP you lose USB3.
-	 * - In order to make everything work, the native Type C port is always
-	 *   configured as 4-lanes DP so it's always available.
-	 * - The extra USB3 port on SDM845 goes to a USB 3 hub which is then
-	 *   sent to the two Type C connectors.
-	 * - The extra USB2 lines from the native Type C port are always
-	 *   setup as "peripheral" so that we can mux them over to one connector
-	 *   or the other if someone needs the connector configured as a gadget
-	 *   (but they only get USB2 speeds).
-	 *
-	 * All the hardware muxes would allow us to hook things up in different
-	 * ways to some potential benefit for static configurations (you could
-	 * achieve extra USB2 bandwidth by using two different ports for the
-	 * two connectors or possibly even get USB3 peripheral mode), but in
-	 * each case you end up forcing to disconnect/reconnect an in-use
-	 * USB session in some cases depending on what you hotplug into the
-	 * other connector.  Thus hardcoding this as peripheral makes sense.
-	 */
-	dr_mode = "peripheral";
-
-	/*
-	 * We always need the high speed pins as 4-lanes DP in case someone
-	 * hotplugs a DP peripheral.  Thus limit this port to a max of high
-	 * speed.
-	 */
-	maximum-speed = "high-speed";
-
-	/*
-	 * We don't need the usb3-phy since we run in highspeed mode always, so
-	 * re-define these properties removing the superspeed USB PHY reference.
-	 */
-	phys = <&usb_1_hsphy>;
-	phy-names = "usb2-phy";
-};
-
-&usb_1_hsphy {
-	status = "okay";
-
-	vdd-supply = <&vdda_usb1_ss_core>;
-	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
-	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
-
-	qcom,imp-res-offset-value = <8>;
-	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
-	qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
-	qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
-};
-
-&usb_2 {
-	status = "okay";
-};
-
-&usb_2_dwc3 {
-	/* We have this hooked up to a hub and we always use in host mode */
-	dr_mode = "host";
-};
-
-&usb_2_hsphy {
-	status = "okay";
-
-	vdd-supply = <&vdda_usb2_ss_core>;
-	vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
-	vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
-
-	qcom,imp-res-offset-value = <8>;
-	qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_22_8_MA>;
-};
-
-&usb_2_qmpphy {
-	status = "okay";
-
-	vdda-phy-supply = <&vdda_usb2_ss_1p2>;
-	vdda-pll-supply = <&vdda_usb2_ss_core>;
-};
-
-&wifi {
-	status = "okay";
-
-	vdd-0.8-cx-mx-supply = <&src_pp800_l5a >;
-	vdd-1.8-xo-supply = <&pp1800_l7a_wcn3990>;
-	vdd-1.3-rfa-supply = <&src_pp1300_l17a>;
-	vdd-3.3-ch0-supply = <&pp3300_l25a_ch0_wcn3990>;
-};
-
-/* PINCTRL - additions to nodes defined in sdm845.dtsi */
-
-&qspi_cs0 {
-	bias-disable;		/* External pullup */
-};
-
-&qspi_clk {
-	bias-disable;		/* Rely on Cr50 internal pulldown */
-};
-
-&qspi_data0 {
-	bias-disable;		/* Rely on Cr50 internal pulldown */
-};
-
-&qspi_data1 {
-	bias-pull-down;
-};
-
-&qup_i2c3_default {
-	drive-strength = <2>;
-
-	/* Has external pullup */
-	bias-disable;
-};
-
-&qup_i2c11_default {
-	drive-strength = <2>;
-
-	/* Has external pullup */
-	bias-disable;
-};
-
-&qup_i2c12_default {
-	drive-strength = <2>;
-
-	/* Has external pullup */
-	bias-disable;
-};
-
-&qup_i2c14_default {
-	drive-strength = <2>;
-
-	/* Has external pullup */
-	bias-disable;
-};
-
-&qup_spi0_default {
-	drive-strength = <2>;
-	bias-disable;
-};
-
-&qup_spi5_default {
-	drive-strength = <2>;
-	bias-disable;
-};
-
-&qup_spi10_default {
-	drive-strength = <2>;
-	bias-disable;
-};
-
-&qup_uart9_rx {
-	drive-strength = <2>;
-	bias-pull-up;
-};
-
-&qup_uart9_tx {
-	drive-strength = <2>;
-	bias-disable;
-};
-
-/* PINCTRL - board-specific pinctrl */
-&pm8005_gpios {
-	gpio-line-names = "",
-			  "",
-			  "SLB",
-			  "";
-};
-
-&pm8998_adc {
-	channel@4d {
-		reg = <ADC5_AMUX_THM1_100K_PU>;
-		label = "sdm_temp";
-	};
-
-	channel@4e {
-		reg = <ADC5_AMUX_THM2_100K_PU>;
-		label = "quiet_temp";
-	};
-
-	channel@4f {
-		reg = <ADC5_AMUX_THM3_100K_PU>;
-		label = "lte_temp_1";
-	};
-
-	channel@50 {
-		reg = <ADC5_AMUX_THM4_100K_PU>;
-		label = "lte_temp_2";
-	};
-
-	channel@51 {
-		reg = <ADC5_AMUX_THM5_100K_PU>;
-		label = "charger_temp";
-	};
-};
-
-&pm8998_gpios {
-	gpio-line-names = "",
-			  "",
-			  "SW_CTRL",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "",
-			  "CFG_OPT1",
-			  "WCSS_PWR_REQ",
-			  "",
-			  "CFG_OPT2",
-			  "SLB";
-};
-
-&tlmm {
-	/*
-	 * pinctrl settings for pins that have no real owners.
-	 */
-	pinctrl-names = "default", "sleep";
-	pinctrl-0 = <&bios_flash_wp_r_l>,
-		    <&ap_suspend_l_deassert>;
-
-	pinctrl-1 = <&bios_flash_wp_r_l>,
-		    <&ap_suspend_l_assert>;
-
-	/*
-	 * Hogs prevent usermode from changing the value. A GPIO can be both
-	 * here and in the pinctrl section.
-	 */
-	ap-suspend-l-hog {
-		gpio-hog;
-		gpios = <126 GPIO_ACTIVE_LOW>;
-		output-low;
-	};
-
-	ap_edp_bklten: ap-edp-bklten-state {
-		pins = "gpio37";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	bios_flash_wp_r_l: bios-flash-wp-r-l-state {
-		pins = "gpio128";
-		function = "gpio";
-		bias-disable;
-	};
-
-	ec_ap_int_l: ec-ap-int-l-state {
-	       pins = "gpio122";
-	       function = "gpio";
-	       bias-pull-up;
-	};
-
-	edp_brij_en: edp-brij-en-state {
-		pins = "gpio102";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	edp_brij_irq: edp-brij-irq-state {
-		pins = "gpio10";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-pull-down;
-	};
-
-	en_pp3300_dx_edp: en-pp3300-dx-edp-state {
-		pins = "gpio43";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	h1_ap_int_odl: h1-ap-int-odl-state {
-		pins = "gpio129";
-		function = "gpio";
-		bias-pull-up;
-	};
-
-	pen_eject_odl: pen-eject-odl-state {
-		pins = "gpio119";
-		function = "gpio";
-		bias-pull-up;
-	};
-
-	pen_irq_l: pen-irq-l-state {
-		pins = "gpio24";
-		function = "gpio";
-
-		/* Has external pullup */
-		bias-disable;
-	};
-
-	pen_pdct_l: pen-pdct-l-state {
-		pins = "gpio63";
-		function = "gpio";
-
-		/* Has external pullup */
-		bias-disable;
-	};
-
-	pen_rst_l: pen-rst-l-state {
-		pins = "gpio23";
-		function = "gpio";
-		bias-disable;
-		drive-strength = <2>;
-
-		/*
-		 * The pen driver doesn't currently support
-		 * driving this reset line.  By specifying
-		 * output-high here we're relying on the fact
-		 * that this pin has a default pulldown at boot
-		 * (which makes sure the pen was in reset if it
-		 * was powered) and then we set it high here to
-		 * take it out of reset.  Better would be if the
-		 * pen driver could control this and we could
-		 * remove "output-high" here.
-		 */
-		output-high;
-	};
-
-	qspi_sleep: qspi-sleep-state {
-		pins = "gpio90", "gpio91", "gpio92", "gpio95";
-
-		/*
-		 * When we're not actively transferring we want pins as GPIOs
-		 * with output disabled so that the quad SPI IP block stops
-		 * driving them. We rely on the normal pulls configured in
-		 * the active state and don't redefine them here. Also note
-		 * that we don't need the reverse (output-enable) in the
-		 * normal mode since the "output-enable" only matters for
-		 * GPIO function.
-		 */
-		function = "gpio";
-		output-disable;
-	};
-
-	sdc2_clk: sdc2-clk-state {
-		pins = "sdc2_clk";
-		bias-disable;
-
-		/*
-		 * It seems that mmc_test reports errors if drive
-		 * strength is not 16.
-		 */
-		drive-strength = <16>;
-	};
-
-	sdc2_cmd: sdc2-cmd-state {
-		pins = "sdc2_cmd";
-		bias-pull-up;
-		drive-strength = <16>;
-	};
-
-	sdc2_data: sdc2-data-state {
-		pins = "sdc2_data";
-		bias-pull-up;
-		drive-strength = <16>;
-	};
-
-	sd_cd_odl: sd-cd-odl-state {
-		pins = "gpio44";
-		function = "gpio";
-		bias-pull-up;
-	};
-
-	ts_int_l: ts-int-l-state {
-		pins = "gpio125";
-		function = "gpio";
-		bias-pull-up;
-	};
-
-	ts_reset_l: ts-reset-l-state {
-		pins = "gpio118";
-		function = "gpio";
-		bias-disable;
-		drive-strength = <2>;
-	};
-
-	ap_suspend_l_assert: ap-suspend-l-assert-state {
-		pins = "gpio126";
-		function = "gpio";
-		bias-disable;
-		drive-strength = <2>;
-		output-low;
-	};
-
-	ap_suspend_l_deassert: ap-suspend-l-deassert-state {
-		pins = "gpio126";
-		function = "gpio";
-		bias-disable;
-		drive-strength = <2>;
-		output-high;
-	};
-};
-
-&venus {
-	status = "okay";
-
-	video-firmware {
-		iommus = <&apps_smmu 0x10b2 0x0>;
-	};
-};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso b/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso
index 51f1a4883ab8..dbe1911d8e47 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c-navigation-mezzanine.dtso
@@ -44,7 +44,8 @@
 
 		clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
 		clock-names = "xvclk";
-		clock-frequency = <19200000>;
+		assigned-clocks = <&clock_camcc CAM_CC_MCLK0_CLK>;
+		assigned-clock-rates = <19200000>;
 
 		/*
 		 * The &vreg_s4a_1p8 trace is powered on as a,
diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
index b5c63fa0365d..8abf3e909502 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts
@@ -5,6 +5,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/arm/qcom,ids.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
@@ -18,7 +19,7 @@
 / {
 	model = "Thundercomm Dragonboard 845c";
 	compatible = "thundercomm,db845c", "qcom,sdm845";
-	qcom,msm-id = <341 0x20001>;
+	qcom,msm-id = <QCOM_ID_SDA845 0x20001>;
 	qcom,board-id = <8 0>;
 
 	aliases {
@@ -533,15 +534,11 @@
 
 	qcom,dual-dsi-mode;
 	qcom,master-dsi;
+};
 
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&lt9611_a>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
+&mdss_dsi0_out {
+	remote-endpoint = <&lt9611_a>;
+	data-lanes = <0 1 2 3>;
 };
 
 &mdss_dsi0_phy {
@@ -559,15 +556,11 @@
 				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 	status = "okay";
+};
 
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&lt9611_b>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
+&mdss_dsi1_out {
+	remote-endpoint = <&lt9611_b>;
+	data-lanes = <0 1 2 3>;
 };
 
 &mdss_dsi1_phy {
diff --git a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
index a98756e8b965..63d2993536ad 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-mtp.dts
@@ -445,15 +445,6 @@
 	qcom,dual-dsi-mode;
 	qcom,master-dsi;
 
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&truly_in_0>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
-
 	panel@0 {
 		compatible = "truly,nt35597-2K-display";
 		reg = <0>;
@@ -483,6 +474,11 @@
 	};
 };
 
+&mdss_dsi0_out {
+	remote-endpoint = <&truly_in_0>;
+	data-lanes = <0 1 2 3>;
+};
+
 &mdss_dsi0_phy {
 	status = "okay";
 	vdds-supply = <&vdda_mipi_dsi0_pll>;
@@ -497,15 +493,11 @@
 	/* DSI1 is slave, so use DSI0 clocks */
 	assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>,
 				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
+};
 
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&truly_in_1>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
+&mdss_dsi1_out {
+	remote-endpoint = <&truly_in_1>;
+	data-lanes = <0 1 2 3>;
 };
 
 &mdss_dsi1_phy {
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
index b118d666e535..dcfffb271fcf 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-common.dtsi
@@ -7,6 +7,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/arm/qcom,ids.h>
 #include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
@@ -21,6 +22,9 @@
 /delete-node/ &rmtfs_mem;
 
 / {
+	chassis-type = "handset";
+	qcom,msm-id = <QCOM_ID_SDM845 0x20001>;
+
 	aliases {
 		serial0 = &uart9;
 		serial1 = &uart6;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts
index 4005e04d998a..a259eb9d45ae 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-enchilada.dts
@@ -5,13 +5,12 @@
  * Copyright (c) 2020, The Linux Foundation. All rights reserved.
  */
 
+#include <dt-bindings/leds/common.h>
 #include "sdm845-oneplus-common.dtsi"
 
 / {
 	model = "OnePlus 6";
 	compatible = "oneplus,enchilada", "qcom,sdm845";
-	chassis-type = "handset";
-	qcom,msm-id = <0x141 0x20001>;
 	qcom,board-id = <8 0 17819 22>;
 
 	battery: battery {
@@ -20,6 +19,14 @@
 		charge-full-design-microamp-hours = <3300000>;
 		voltage-min-design-microvolt = <3400000>;
 		voltage-max-design-microvolt = <4400000>;
+
+		/*
+		 * Typical designs have multiple charger ICs which can handle more
+		 * current but the OnePlus 6/T do not, hence the lower limit. This
+		 * does not apply when using the Dash Charger, however this is not
+		 * yet supported.
+		 */
+		constant-charge-current-max-microamp = <1800000>;
 	};
 };
 
@@ -55,6 +62,33 @@
 	monitored-battery = <&battery>;
 };
 
+&pmi8998_lpg {
+	status = "okay";
+
+	multi-led {
+		color = <LED_COLOR_ID_RGB>;
+		function = LED_FUNCTION_STATUS;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		led@3 {
+			reg = <3>;
+			color = <LED_COLOR_ID_BLUE>;
+		};
+
+		led@4 {
+			reg = <4>;
+			color = <LED_COLOR_ID_GREEN>;
+		};
+
+		led@5 {
+			reg = <5>;
+			color = <LED_COLOR_ID_RED>;
+		};
+	};
+};
+
 &sound {
 	model = "OnePlus 6";
 	audio-routing = "RX_BIAS", "MCLK",
diff --git a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts
index 9471ada0d6ad..7e75decfda05 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-oneplus-fajita.dts
@@ -10,8 +10,6 @@
 / {
 	model = "OnePlus 6T";
 	compatible = "oneplus,fajita", "qcom,sdm845";
-	chassis-type = "handset";
-	qcom,msm-id = <0x141 0x20001>;
 	qcom,board-id = <8 0 18801 41>;
 
 	battery: battery {
@@ -20,6 +18,14 @@
 		charge-full-design-microamp-hours = <3700000>;
 		voltage-min-design-microvolt = <3400000>;
 		voltage-max-design-microvolt = <4400000>;
+
+		/*
+		 * Typical designs have multiple charger ICs which can handle more
+		 * current but the OnePlus 6/T do not, hence the lower limit. This
+		 * does not apply when using the Dash Charger, however this is not
+		 * yet supported.
+		 */
+		constant-charge-current-max-microamp = <1800000>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
index d686531bf4ea..75a53f0bbebd 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-samsung-starqltechn.dts
@@ -56,6 +56,21 @@
 		};
 	};
 
+	slpi_regulator: slpi-regulator {
+		compatible = "regulator-fixed";
+		pinctrl-0 = <&slpi_ldo_active_state>;
+		pinctrl-names = "default";
+
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-name = "slpi";
+
+		enable-active-high;
+		gpio = <&tlmm 8 GPIO_ACTIVE_HIGH>;
+	};
+
 	vib_regulator: gpio-regulator {
 		compatible = "regulator-fixed";
 
@@ -118,7 +133,7 @@
 		};
 
 		slpi_mem: slpi@96700000 {
-			reg = <0 0x96700000 0 0xf00000>;
+			reg = <0 0x96700000 0 0x1000000>;
 			no-map;
 		};
 
@@ -145,8 +160,8 @@
 
 	i2c21 {
 		compatible = "i2c-gpio";
-		sda-gpios = <&tlmm 127 GPIO_ACTIVE_HIGH>;
-		scl-gpios = <&tlmm 128 GPIO_ACTIVE_HIGH>;
+		sda-gpios = <&tlmm 127 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&tlmm 128 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
 		i2c-gpio,delay-us = <2>;
 		pinctrl-0 = <&i2c21_sda_state &i2c21_scl_state>;
 		pinctrl-names = "default";
@@ -633,7 +648,6 @@
 		monitored-battery = <&battery>;
 		interrupt-parent = <&pm8998_gpios>;
 		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
-
 	};
 
 	fuel-gauge@36 {
@@ -701,7 +715,7 @@
 	pinctrl-names = "default";
 	status = "okay";
 
-	audio-routing =	"RX_BIAS", "MCLK",
+	audio-routing = "RX_BIAS", "MCLK",
 			"AMIC2", "MIC BIAS2",	/* Headset Mic */
 			"AMIC3", "MIC BIAS2",	/* FM radio left Tx */
 			"AMIC4", "MIC BIAS2",	/* FM radio right Tx */
@@ -903,6 +917,13 @@
 	status = "okay";
 };
 
+&slpi_pas {
+	firmware-name = "qcom/sdm845/starqltechn/slpi.mbn";
+	cx-supply = <&slpi_regulator>;
+
+	status = "okay";
+};
+
 &usb_1 {
 	status = "okay";
 };
@@ -1029,6 +1050,13 @@
 		bias-pull-up;
 	};
 
+	slpi_ldo_active_state: slpi-ldo-active-state {
+		pins = "gpio8";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	touch_irq_state: touch-irq-state {
 		pins = "gpio120";
 		function = "gpio";
diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
index 2cf7b5e1243c..89260fce6513 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
@@ -7,6 +7,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/arm/qcom,ids.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
@@ -17,7 +18,8 @@
 / {
 	model = "SHIFT SHIFT6mq";
 	compatible = "shift,axolotl", "qcom,sdm845";
-	qcom,msm-id = <321 0x20001>;
+	chassis-type = "handset";
+	qcom,msm-id = <QCOM_ID_SDM845 0x20001>;
 	qcom,board-id = <11 0>;
 
 	aliases {
diff --git a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
index a3a304e1ac87..f3f4c0900572 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-sony-xperia-tama.dtsi
@@ -3,6 +3,7 @@
  * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
  */
 
+#include <dt-bindings/arm/qcom,ids.h>
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
@@ -12,7 +13,7 @@
 #include "pmi8998.dtsi"
 
 / {
-	qcom,msm-id = <321 0x20001>; /* SDM845 v2.1 */
+	qcom,msm-id = <QCOM_ID_SDM845 0x20001>; /* SDM845 v2.1 */
 	qcom,board-id = <8 0>;
 
 	aliases {
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
index 7810b0ce7591..7480c8d7ac5b 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-beryllium-common.dtsi
@@ -2,6 +2,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/arm/qcom,ids.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
@@ -32,7 +33,7 @@
 
 	/* required for bootloader to select correct board */
 	qcom,board-id = <69 0>;
-	qcom,msm-id = <321 0x20001>;
+	qcom,msm-id = <QCOM_ID_SDM845 0x20001>;
 
 	aliases {
 		serial1 = &uart6;
diff --git a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
index 63cf879a7a29..1c50a0563bc4 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-xiaomi-polaris.dts
@@ -6,6 +6,7 @@
 
 /dts-v1/;
 
+#include <dt-bindings/arm/qcom,ids.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
@@ -38,7 +39,7 @@
 	chassis-type = "handset";
 
 	/* required for bootloader to select correct board */
-	qcom,msm-id = <0x141 0x20001>;
+	qcom,msm-id = <QCOM_ID_SDM845 0x20001>;
 	qcom,board-id = <0x2a 0x0>;
 
 	aliases {
diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi
index c0f466d96630..13c9515260ef 100644
--- a/arch/arm64/boot/dts/qcom/sdm845.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi
@@ -2347,10 +2347,10 @@
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
 				 <&gcc GCC_PCIE_0_AUX_CLK>,
@@ -2472,10 +2472,10 @@
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
 				 <&gcc GCC_PCIE_1_AUX_CLK>,
@@ -4089,7 +4089,7 @@
 					reg = <2>;
 
 					usb_1_qmpphy_dp_in: endpoint {
-						remote-endpoint = <&dp_out>;
+						remote-endpoint = <&mdss_dp_out>;
 					};
 				};
 			};
@@ -4286,14 +4286,6 @@
 
 			status = "disabled";
 
-			video-core0 {
-				compatible = "venus-decoder";
-			};
-
-			video-core1 {
-				compatible = "venus-encoder";
-			};
-
 			venus_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
@@ -4603,7 +4595,7 @@
 					port@0 {
 						reg = <0>;
 						dpu_intf0_out: endpoint {
-							remote-endpoint = <&dp_in>;
+							remote-endpoint = <&mdss_dp_in>;
 						};
 					};
 
@@ -4664,12 +4656,19 @@
 					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
 					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
 					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
-					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
-				clock-names = "core_iface", "core_aux", "ctrl_link",
-					      "ctrl_link_iface", "stream_pixel";
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK>;
+				clock-names = "core_iface",
+					      "core_aux",
+					      "ctrl_link",
+					      "ctrl_link_iface",
+					      "stream_pixel",
+					      "stream_1_pixel";
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
-						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK_SRC>;
 				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
 				phy-names = "dp";
@@ -4682,14 +4681,14 @@
 					#size-cells = <0>;
 					port@0 {
 						reg = <0>;
-						dp_in: endpoint {
+						mdss_dp_in: endpoint {
 							remote-endpoint = <&dpu_intf0_out>;
 						};
 					};
 
 					port@1 {
 						reg = <1>;
-						dp_out: endpoint {
+						mdss_dp_out: endpoint {
 							remote-endpoint = <&usb_1_qmpphy_dp_in>;
 						};
 					};
@@ -5404,11 +5403,11 @@
 			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
 			qcom,controlled-remotely;
 			reg = <0 0x17184000 0 0x2a000>;
-			num-channels = <31>;
+			num-channels = <23>;
 			interrupts = <GIC_SPI 164 IRQ_TYPE_LEVEL_HIGH>;
 			#dma-cells = <1>;
 			qcom,ee = <1>;
-			qcom,num-ees = <2>;
+			qcom,num-ees = <4>;
 			iommus = <&apps_smmu 0x1806 0x0>;
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
index 8ef6db3be6e3..90efbb7e3799 100644
--- a/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
+++ b/arch/arm64/boot/dts/qcom/sdm850-lenovo-yoga-c630.dts
@@ -421,9 +421,46 @@
 			data-role = "host";
 
 			/*
-			 * connected to the onboard USB hub, orientation is
-			 * handled by the controller
+			 * connected to the onboard USB hub, each pair of lanes
+			 * (and D+/D- pair) is connected to a separate port on
+			 * the hub.
 			 */
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					ucsi1_hs_in_1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&usb_hub_2_1>;
+					};
+
+					ucsi1_hs_in_2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&usb_hub_2_2>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					ucsi1_ss_in_1: endpoint@1 {
+						reg = <1>;
+						remote-endpoint = <&usb_hub_3_1>;
+					};
+
+					ucsi1_ss_in_2: endpoint@2 {
+						reg = <2>;
+						remote-endpoint = <&usb_hub_3_2>;
+					};
+				};
+			};
 		};
 	};
 };
@@ -561,15 +598,11 @@
 &mdss_dsi0 {
 	status = "okay";
 	vdda-supply = <&vreg_l26a_1p2>;
+};
 
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&sn65dsi86_in_a>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
+&mdss_dsi0_out {
+	remote-endpoint = <&sn65dsi86_in_a>;
+	data-lanes = <0 1 2 3>;
 };
 
 &mdss_dsi0_phy {
@@ -842,6 +875,69 @@
 
 &usb_2_dwc3 {
 	dr_mode = "host";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	usb_hub_2_x: hub@1 {
+		compatible = "usb5e3,610";
+		reg = <1>;
+		peer-hub = <&usb_hub_3_x>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		camera@3 {
+			compatible = "usb4f2,b61e";
+			reg = <3>;
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+
+				usb_hub_2_1: endpoint {
+					remote-endpoint = <&ucsi1_hs_in_1>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				usb_hub_2_2: endpoint {
+					remote-endpoint = <&ucsi1_hs_in_2>;
+				};
+			};
+		};
+	};
+
+	usb_hub_3_x: hub@2 {
+		compatible = "usb5e3,620";
+		reg = <2>;
+		peer-hub = <&usb_hub_2_x>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@1 {
+				reg = <1>;
+
+				usb_hub_3_1: endpoint {
+					remote-endpoint = <&ucsi1_ss_in_1>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				usb_hub_3_2: endpoint {
+					remote-endpoint = <&ucsi1_ss_in_2>;
+				};
+			};
+		};
+	};
 };
 
 &usb_2_hsphy {
diff --git a/arch/arm64/boot/dts/qcom/qcs615.dtsi b/arch/arm64/boot/dts/qcom/sm6150.dtsi
index bfbb21035492..3d2a1cb02b62 100644
--- a/arch/arm64/boot/dts/qcom/qcs615.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6150.dtsi
@@ -3,7 +3,11 @@
  * Copyright (c) 2024, Qualcomm Innovation Center, Inc. All rights reserved.
  */
 
+#include <dt-bindings/clock/qcom,qcs615-camcc.h>
+#include <dt-bindings/clock/qcom,qcs615-dispcc.h>
 #include <dt-bindings/clock/qcom,qcs615-gcc.h>
+#include <dt-bindings/clock/qcom,qcs615-gpucc.h>
+#include <dt-bindings/clock/qcom,qcs615-videocc.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/interconnect/qcom,icc.h>
@@ -32,6 +36,8 @@
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			next-level-cache = <&l2_0>;
+			clocks = <&cpufreq_hw 0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 			#cooling-cells = <2>;
 
 			l2_0: l2-cache {
@@ -52,6 +58,8 @@
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			next-level-cache = <&l2_100>;
+			clocks = <&cpufreq_hw 0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 
 			l2_100: l2-cache {
 			      compatible = "cache";
@@ -71,6 +79,8 @@
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			next-level-cache = <&l2_200>;
+			clocks = <&cpufreq_hw 0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 
 			l2_200: l2-cache {
 			      compatible = "cache";
@@ -90,6 +100,8 @@
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			next-level-cache = <&l2_300>;
+			clocks = <&cpufreq_hw 0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 
 			l2_300: l2-cache {
 			      compatible = "cache";
@@ -109,6 +121,8 @@
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			next-level-cache = <&l2_400>;
+			clocks = <&cpufreq_hw 0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 
 			l2_400: l2-cache {
 			      compatible = "cache";
@@ -128,6 +142,8 @@
 			capacity-dmips-mhz = <1024>;
 			dynamic-power-coefficient = <100>;
 			next-level-cache = <&l2_500>;
+			clocks = <&cpufreq_hw 0>;
+			qcom,freq-domain = <&cpufreq_hw 0>;
 
 			l2_500: l2-cache {
 			      compatible = "cache";
@@ -147,6 +163,8 @@
 			capacity-dmips-mhz = <1740>;
 			dynamic-power-coefficient = <404>;
 			next-level-cache = <&l2_600>;
+			clocks = <&cpufreq_hw 1>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
 			#cooling-cells = <2>;
 
 			l2_600: l2-cache {
@@ -167,6 +185,8 @@
 			capacity-dmips-mhz = <1740>;
 			dynamic-power-coefficient = <404>;
 			next-level-cache = <&l2_700>;
+			clocks = <&cpufreq_hw 1>;
+			qcom,freq-domain = <&cpufreq_hw 1>;
 
 			l2_700: l2-cache {
 			      compatible = "cache";
@@ -474,6 +494,11 @@
 			hwlocks = <&tcsr_mutex 3>;
 		};
 
+		pil_video_mem: pil-video@93400000 {
+			reg = <0x0 0x93400000 0x0 0x500000>;
+			no-map;
+		};
+
 		rproc_cdsp_mem: rproc-cdsp@93b00000 {
 			reg = <0x0 0x93b00000 0x0 0x1e00000>;
 			no-map;
@@ -495,6 +520,9 @@
 		gcc: clock-controller@100000 {
 			compatible = "qcom,qcs615-gcc";
 			reg = <0 0x00100000 0 0x1f0000>;
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK_A>,
+				 <&sleep_clk>;
 
 			#clock-cells = <1>;
 			#reset-cells = <1>;
@@ -631,6 +659,7 @@
 				interconnect-names = "qup-core",
 						     "qup-config";
 				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -654,6 +683,7 @@
 						     "qup-config",
 						     "qup-memory";
 				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -681,6 +711,7 @@
 						     "qup-config",
 						     "qup-memory";
 				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -703,6 +734,7 @@
 				interconnect-names = "qup-core",
 						     "qup-config";
 				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_SPI>,
 				       <&gpi_dma0 1 2 QCOM_GPI_SPI>;
 				dma-names = "tx",
@@ -728,6 +760,7 @@
 				interconnect-names = "qup-core",
 						     "qup-config";
 				power-domains = <&rpmhpd RPMHPD_CX>;
+				operating-points-v2 = <&qup_opp_table>;
 				status = "disabled";
 			};
 
@@ -751,6 +784,7 @@
 						     "qup-config",
 						     "qup-memory";
 				power-domains = <&rpmhpd RPMHPD_CX>;
+				required-opps = <&rpmhpd_opp_low_svs>;
 				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx",
@@ -1066,6 +1100,153 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
+		pcie: pcie@1c08000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-qcs615", "qcom,pcie-sm8150";
+			reg = <0x0 0x01c08000 0x0 0x3000>,
+			      <0x0 0x40000000 0x0 0xf1d>,
+			      <0x0 0x40000f20 0x0 0xa8>,
+			      <0x0 0x40001000 0x0 0x1000>,
+			      <0x0 0x40100000 0x0 0x100000>,
+			      <0x0 0x01c0b000 0x0 0x1000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "config",
+				    "mhi";
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <0>;
+			num-lanes = <1>;
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
+				 <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>;
+			clock-names = "pipe",
+				      "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a";
+			assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>;
+			assigned-clock-rates = <19200000>;
+
+			interconnects = <&aggre1_noc MASTER_PCIE QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_PCIE_0 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "pcie-mem", "cpu-pcie";
+
+			iommu-map = <0x0 &apps_smmu 0x400 0x1>,
+				    <0x100 &apps_smmu 0x401 0x1>;
+
+			resets = <&gcc GCC_PCIE_0_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc PCIE_0_GDSC>;
+
+			phys = <&pcie_phy>;
+			phy-names = "pciephy";
+
+			max-link-speed = <2>;
+
+			operating-points-v2 = <&pcie_opp_table>;
+
+			status = "disabled";
+
+			pcie_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/* GEN 1 x1 */
+				opp-2500000 {
+					opp-hz = /bits/ 64 <2500000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <250000 1>;
+				};
+
+				/* GEN 2 x1 */
+				opp-5000000 {
+					opp-hz = /bits/ 64 <5000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <500000 1>;
+				};
+			};
+
+			pcie_port0: pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+				bus-range = <0x01 0xff>;
+			};
+		};
+
+		pcie_phy: phy@1c0e000 {
+			compatible = "qcom,qcs615-qmp-gen3x1-pcie-phy";
+			reg = <0x0 0x01c0e000 0x0 0x1000>;
+
+			clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_CLKREF_CLK>,
+				 <&gcc GCC_PCIE0_PHY_REFGEN_CLK>,
+				 <&gcc GCC_PCIE_0_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "refgen",
+				      "pipe";
+
+			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+			reset-names = "phy";
+
+			assigned-clocks = <&gcc GCC_PCIE0_PHY_REFGEN_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie_0_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
 		ufs_mem_hc: ufshc@1d84000 {
 			compatible = "qcom,qcs615-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
 			reg = <0x0 0x01d84000 0x0 0x3000>,
@@ -1506,6 +1687,19 @@
 			};
 		};
 
+		gpucc: clock-controller@5090000 {
+			compatible = "qcom,qcs615-gpucc";
+			reg = <0 0x05090000 0 0x9000>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GPLL0>,
+				 <&gcc GCC_GPU_GPLL0_DIV_CLK_SRC>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		stm@6002000 {
 			compatible = "arm,coresight-stm", "arm,primecell";
 			reg = <0x0 0x06002000 0x0 0x1000>,
@@ -3166,6 +3360,56 @@
 				mboxes = <&apss_shared 4>;
 				label = "cdsp";
 				qcom,remote-pid = <5>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "cdsp";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@1 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <1>;
+						iommus = <&apps_smmu 0x1081 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@2 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <2>;
+						iommus = <&apps_smmu 0x1082 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1083 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1084 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1085 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x1086 0x0>;
+						dma-coherent;
+					};
+				};
 			};
 		};
 
@@ -3317,6 +3561,119 @@
 			qcom,bcm-voters = <&apps_bcm_voter>;
 		};
 
+		venus: video-codec@aa00000 {
+			compatible = "qcom,qcs615-venus", "qcom,sc7180-venus";
+			reg = <0x0 0x0aa00000 0x0 0x100000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&videocc VIDEO_CC_VENUS_CTL_CORE_CLK>,
+				 <&videocc VIDEO_CC_VENUS_AHB_CLK>,
+				 <&videocc VIDEO_CC_VENUS_CTL_AXI_CLK>,
+				 <&videocc VIDEO_CC_VCODEC0_CORE_CLK>,
+				 <&videocc VIDEO_CC_VCODEC0_AXI_CLK>;
+			clock-names = "core",
+				      "iface",
+				      "bus",
+				      "vcodec0_core",
+				      "vcodec0_bus";
+
+			power-domains = <&videocc VENUS_GDSC>,
+					<&videocc VCODEC0_GDSC>,
+					<&rpmhpd RPMHPD_CX>;
+			power-domain-names = "venus",
+					     "vcodec0",
+					     "cx";
+
+			operating-points-v2 = <&venus_opp_table>;
+
+			interconnects = <&mmss_noc MASTER_VIDEO_P0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "video-mem",
+					     "cpu-cfg";
+
+			iommus = <&apps_smmu 0xe60 0x20>;
+
+			memory-region = <&pil_video_mem>;
+
+			status = "disabled";
+
+			venus_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-133330000 {
+					opp-hz = /bits/ 64 <133330000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+				};
+
+				opp-240000000 {
+					opp-hz = /bits/ 64 <240000000>;
+					required-opps = <&rpmhpd_opp_svs>;
+				};
+
+				opp-300000000 {
+					opp-hz = /bits/ 64 <300000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-380000000 {
+					opp-hz = /bits/ 64 <380000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+				};
+
+				opp-410000000 {
+					opp-hz = /bits/ 64 <410000000>;
+					required-opps = <&rpmhpd_opp_nom_l1>;
+				};
+
+				opp-460000000 {
+					opp-hz = /bits/ 64 <460000000>;
+					required-opps = <&rpmhpd_opp_turbo>;
+				};
+			};
+		};
+
+		videocc: clock-controller@ab00000 {
+			compatible = "qcom,qcs615-videocc";
+			reg = <0 0x0ab00000 0 0x10000>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&sleep_clk>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		camcc: clock-controller@ad00000 {
+			compatible = "qcom,qcs615-camcc";
+			reg = <0 0x0ad00000 0 0x10000>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
+		dispcc: clock-controller@af00000 {
+			compatible = "qcom,qcs615-dispcc";
+			reg = <0 0x0af00000 0 0x20000>;
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>,
+				 <0>;
+
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,qcs615-pdc", "qcom,pdc";
 			reg = <0x0 0x0b220000 0x0 0x30000>,
@@ -3456,6 +3813,7 @@
 			reg = <0x0 0x17a00000 0x0 0x10000>,     /* GICD */
 			      <0x0 0x17a60000 0x0 0x100000>;    /* GICR * 8 */
 			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			#redistributor-regions = <1>;
@@ -3473,6 +3831,7 @@
 			compatible = "qcom,apss-wdt-qcs615", "qcom,kpss-wdt";
 			reg = <0x0 0x17c10000 0x0 0x1000>;
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&sleep_clk>;
 		};
 
 		timer@17c20000 {
@@ -3562,6 +3921,7 @@
 
 			rpmhcc: clock-controller {
 				compatible = "qcom,qcs615-rpmh-clk";
+				clocks = <&xo_board_clk>;
 				clock-names = "xo";
 
 				#clock-cells = <1>;
@@ -3803,6 +4163,17 @@
 			};
 		};
 
+		tsens0: thermal-sensor@c263000 {
+			compatible = "qcom,qcs615-tsens", "qcom,tsens-v2";
+			reg = <0x0 0x0c263000 0x0 0x1000>,
+			      <0x0 0x0c222000 0x0 0x1000>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "uplow", "critical";
+			#qcom,sensors = <16>;
+			#thermal-sensor-cells = <1>;
+		};
+
 		remoteproc_adsp: remoteproc@62400000 {
 			compatible = "qcom,qcs615-adsp-pas", "qcom,sm8150-adsp-pas";
 			reg = <0x0 0x62400000 0x0 0x4040>;
@@ -3838,8 +4209,57 @@
 				mboxes = <&apss_shared 24>;
 				label = "lpass";
 				qcom,remote-pid = <2>;
+
+				fastrpc {
+					compatible = "qcom,fastrpc";
+					qcom,glink-channels = "fastrpcglink-apps-dsp";
+					label = "adsp";
+					#address-cells = <1>;
+					#size-cells = <0>;
+
+					compute-cb@3 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <3>;
+						iommus = <&apps_smmu 0x1723 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@4 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <4>;
+						iommus = <&apps_smmu 0x1724 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@5 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <5>;
+						iommus = <&apps_smmu 0x1725 0x0>;
+						dma-coherent;
+					};
+
+					compute-cb@6 {
+						compatible = "qcom,fastrpc-compute-cb";
+						reg = <6>;
+						iommus = <&apps_smmu 0x1726 0x0>;
+						qcom,nsessions = <5>;
+						dma-coherent;
+					};
+				};
 			};
 		};
+
+		cpufreq_hw: cpufreq@18323000 {
+			compatible = "qcom,qcs615-cpufreq-hw", "qcom,cpufreq-hw";
+			reg = <0 0x18323000 0 0x1400>, <0 0x18325800 0 0x1400>;
+			reg-names = "freq-domain0", "freq-domain1";
+
+			clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GPLL0>;
+			clock-names = "xo", "alternate";
+
+			#freq-domain-cells = <1>;
+			#clock-cells = <1>;
+		};
 	};
 
 	arch_timer: timer {
@@ -3849,4 +4269,198 @@
 			     <GIC_PPI 3 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
 			     <GIC_PPI 0 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
 	};
+
+	thermal-zones {
+		aoss-thermal {
+			thermal-sensors = <&tsens0 0>;
+
+			trips {
+				aoss-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss-0-thermal {
+			thermal-sensors = <&tsens0 1>;
+
+			trips {
+				cpuss0-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss-1-thermal {
+			thermal-sensors = <&tsens0 2>;
+
+			trips {
+				cpuss1-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss-2-thermal {
+			thermal-sensors = <&tsens0 3>;
+
+			trips {
+				cpuss2-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpuss-3-thermal {
+			thermal-sensors = <&tsens0 4>;
+
+			trips {
+				cpuss3-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-1-0-thermal {
+			thermal-sensors = <&tsens0 5>;
+
+			trips {
+				cpu-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-1-1-thermal {
+			thermal-sensors = <&tsens0 6>;
+
+			trips {
+				cpu-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-1-2-thermal {
+			thermal-sensors = <&tsens0 7>;
+
+			trips {
+				cpu-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		cpu-1-3-thermal {
+			thermal-sensors = <&tsens0 8>;
+
+			trips {
+				cpu-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		gpu-thermal {
+			thermal-sensors = <&tsens0 9>;
+
+			trips {
+				gpu-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		q6-hvx-thermal {
+			thermal-sensors = <&tsens0 10>;
+
+			trips {
+				q6-hvx-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		mdm-core-thermal {
+			thermal-sensors = <&tsens0 11>;
+
+			trips {
+				mdm-core-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		camera-thermal {
+			thermal-sensors = <&tsens0 12>;
+
+			trips {
+				camera-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		wlan-thermal {
+			thermal-sensors = <&tsens0 13>;
+
+			trips {
+				wlan-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		display-thermal {
+			thermal-sensors = <&tsens0 14>;
+
+			trips {
+				display-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+
+		video-thermal {
+			thermal-sensors = <&tsens0 15>;
+
+			trips {
+				video-critical {
+					temperature = <115000>;
+					hysteresis = <1000>;
+					type = "critical";
+				};
+			};
+		};
+	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sm6350.dtsi b/arch/arm64/boot/dts/qcom/sm6350.dtsi
index ff1eb2c53e7b..8459b27cacc7 100644
--- a/arch/arm64/boot/dts/qcom/sm6350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6350.dtsi
@@ -1351,6 +1351,13 @@
 							compatible = "qcom,q6afe-clocks";
 							#clock-cells = <2>;
 						};
+
+						q6usbdai: usbd {
+							compatible = "qcom,q6usb";
+							iommus = <&apps_smmu 0x100f 0x0>;
+							#sound-dai-cells = <1>;
+							qcom,usb-audio-intr-idx = /bits/ 16 <2>;
+						};
 					};
 
 					q6asm: service@7 {
@@ -1979,6 +1986,7 @@
 				reg = <0x0 0x0a600000 0x0 0xcd00>;
 				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
 				iommus = <&apps_smmu 0x540 0x0>;
+				num-hc-interrupters = /bits/ 16 <3>;
 				snps,dis_u2_susphy_quirk;
 				snps,dis_enblslpm_quirk;
 				snps,has-lpm-erratum;
@@ -2241,7 +2249,7 @@
 			};
 
 			mdss_dp: displayport-controller@ae90000 {
-				compatible = "qcom,sm6350-dp", "qcom,sm8350-dp";
+				compatible = "qcom,sm6350-dp", "qcom,sc7180-dp";
 				reg = <0x0 0xae90000 0x0 0x200>,
 				      <0x0 0xae90200 0x0 0x200>,
 				      <0x0 0xae90400 0x0 0x600>,
@@ -2479,6 +2487,11 @@
 			#clock-cells = <0>;
 		};
 
+		sram@c3f0000 {
+			compatible = "qcom,rpmh-stats";
+			reg = <0x0 0x0c3f0000 0x0 0x400>;
+		};
+
 		spmi_bus: spmi@c440000 {
 			compatible = "qcom,spmi-pmic-arb";
 			reg = <0x0 0x0c440000 0x0 0x1100>,
@@ -2962,6 +2975,9 @@
 		};
 	};
 
+	sound: sound {
+	};
+
 	thermal-zones {
 		aoss0-thermal {
 			thermal-sensors = <&tsens0 0>;
diff --git a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
index 52b16a4fdc43..4afbab570ca1 100644
--- a/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
+++ b/arch/arm64/boot/dts/qcom/sm7225-fairphone-fp4.dts
@@ -19,6 +19,7 @@
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
 #include <dt-bindings/usb/pd.h>
 #include "sm7225.dtsi"
 #include "pm6150l.dtsi"
@@ -938,6 +939,12 @@
 	};
 };
 
+&q6asmdai {
+	dai@0 {
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
+	};
+};
+
 &qup_uart1_cts {
 	/*
 	 * Configure a bias-bus-hold on CTS to lower power
@@ -1006,6 +1013,35 @@
 	status = "okay";
 };
 
+&sound {
+	compatible = "fairphone,fp4-sndcard";
+	model = "Fairphone 4";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	usb-dai-link {
+		link-name = "USB Playback";
+
+		codec {
+			sound-dai = <&q6usbdai USB_RX>;
+		};
+
+		cpu {
+			sound-dai = <&q6afedai USB_RX>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+	};
+};
+
 &tlmm {
 	gpio-reserved-ranges = <13 4>, <56 2>;
 
diff --git a/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts b/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts
index befbb40228b5..f16b47b6a74c 100644
--- a/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts
+++ b/arch/arm64/boot/dts/qcom/sm7325-nothing-spacewar.dts
@@ -1425,16 +1425,14 @@
 &usb_1 {
 	/* USB 2.0 only */
 	qcom,select-utmi-as-pipe-clk;
-	status = "okay";
-};
-
-&usb_1_dwc3 {
 	dr_mode = "otg";
 	usb-role-switch;
 	maximum-speed = "high-speed";
 	/* Remove USB3 phy */
 	phys = <&usb_1_hsphy>;
 	phy-names = "usb2-phy";
+
+	status = "okay";
 };
 
 &usb_1_dwc3_hs {
diff --git a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
index e1e294f0f462..0339a572f34d 100644
--- a/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8150-hdk.dts
@@ -478,15 +478,11 @@
 
 	qcom,dual-dsi-mode;
 	qcom,master-dsi;
+};
 
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&lt9611_a>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
+&mdss_dsi0_out {
+	remote-endpoint = <&lt9611_a>;
+	data-lanes = <0 1 2 3>;
 };
 
 &mdss_dsi0_phy {
@@ -504,15 +500,11 @@
 				 <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>;
 
 	status = "okay";
+};
 
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&lt9611_b>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
+&mdss_dsi1_out {
+	remote-endpoint = <&lt9611_b>;
+	data-lanes = <0 1 2 3>;
 };
 
 &mdss_dsi1_phy {
diff --git a/arch/arm64/boot/dts/qcom/sm8150.dtsi b/arch/arm64/boot/dts/qcom/sm8150.dtsi
index abf12e10d33f..acdba79612aa 100644
--- a/arch/arm64/boot/dts/qcom/sm8150.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8150.dtsi
@@ -1866,10 +1866,10 @@
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
 				 <&gcc GCC_PCIE_0_AUX_CLK>,
@@ -1981,10 +1981,10 @@
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
 				 <&gcc GCC_PCIE_1_AUX_CLK>,
@@ -3890,16 +3890,20 @@
 					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
 					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
 					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
-					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK>;
 				clock-names = "core_iface",
 					      "core_aux",
 					      "ctrl_link",
 					      "ctrl_link_iface",
-					      "stream_pixel";
+					      "stream_pixel",
+					      "stream_1_pixel";
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
-						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK_SRC>;
 				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 
 				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
@@ -3908,7 +3912,7 @@
 				#sound-dai-cells = <0>;
 
 				operating-points-v2 = <&dp_opp_table>;
-				power-domains = <&rpmhpd SM8250_MMCX>;
+				power-domains = <&rpmhpd SM8150_MMCX>;
 
 				status = "disabled";
 
@@ -4366,6 +4370,7 @@
 		intc: interrupt-controller@17a00000 {
 			compatible = "arm,gic-v3";
 			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			reg = <0x0 0x17a00000 0x0 0x10000>,	/* GICD */
 			      <0x0 0x17a60000 0x0 0x100000>;	/* GICR * 8 */
@@ -4419,7 +4424,7 @@
 			frame@17c27000 {
 				frame-number = <3>;
 				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
-				reg = <0x17c26000 0x1000>;
+				reg = <0x17c27000 0x1000>;
 				status = "disabled";
 			};
 
diff --git a/arch/arm64/boot/dts/qcom/sm8250-samsung-common.dtsi b/arch/arm64/boot/dts/qcom/sm8250-samsung-common.dtsi
new file mode 100644
index 000000000000..cf3d917addd8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-samsung-common.dtsi
@@ -0,0 +1,204 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm8250.dtsi"
+#include "pm8150.dtsi"
+
+/ {
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer: framebuffer@9c000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0x9c000000 0x0 0x2300000>;
+			width = <1080>;
+			height = <2400>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	gpio_keys: gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&vol_up_n>;
+
+		key-vol-up {
+			label = "Volume Up";
+			gpios = <&pm8150_gpios 3 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_VOLUMEUP>;
+			debounce-interval = <15>;
+			linux,can-disable;
+			wakeup-source;
+		};
+	};
+
+	reserved-memory {
+		cont_splash_mem: memory@9c000000 {
+			reg = <0x0 0x9c000000 0x0 0x2300000>;
+			no-map;
+		};
+
+		ramoops@9fa00000 {
+			compatible = "ramoops";
+			reg = <0x0 0x9fa00000 0x0 0x100000>;
+			record-size = <0x4000>;
+			console-size = <0x40000>;
+			ftrace-size = <0x40000>;
+			pmsg-size = <0x40000>;
+			no-map;
+		};
+	};
+
+	vph_pwr: vph-pwr-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8150-rpmh-regulators";
+		qcom,pmic-id = "a";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vreg_s4a_1p8: smps4 {
+			regulator-name = "vreg_s4a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2a_3p1: ldo2 {
+			regulator-name = "vreg_l2a_3p1";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5a_0p88: ldo5 {
+			regulator-name = "vreg_l5a_0p88";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6a_1p2: ldo6 {
+			regulator-name = "vreg_l6a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9a_1p2: ldo9 {
+			regulator-name = "vreg_l9a_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12a_1p8: ldo12 {
+			regulator-name = "vreg_l12a_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17a_3p0: ldo17 {
+			regulator-name = "vreg_l17a_3p0";
+			regulator-min-microvolt = <2496000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-allow-set-load;
+			regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM
+						   RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&pm8150_gpios {
+	vol_up_n: vol-up-n-state {
+		pins = "gpio3";
+		function = "normal";
+		power-source = <0>;
+		input-enable;
+		bias-pull-up;
+	};
+};
+
+&pon_pwrkey {
+	status = "okay";
+};
+
+&pon_resin {
+	linux,code = <KEY_VOLUMEDOWN>;
+	status = "okay";
+};
+
+&tlmm {
+	gpio-reserved-ranges = <40 4>; /* I2C (Unused) */
+};
+
+&usb_1 {
+	/* Limit to USB 2.0 for now */
+	qcom,select-utmi-as-pipe-clk;
+
+	status = "okay";
+};
+
+&usb_1_dwc3 {
+	dr_mode = "peripheral";
+	maximum-speed = "high-speed";
+	/* Remove USB3 phy */
+	phys = <&usb_1_hsphy>;
+	phy-names = "usb2-phy";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l5a_0p88>;
+	vdda18-supply = <&vreg_l12a_1p8>;
+	vdda33-supply = <&vreg_l2a_3p1>;
+
+	status = "okay";
+};
+
+&ufs_mem_hc {
+	vcc-supply = <&vreg_l17a_3p0>;
+	vcc-max-microamp = <800000>;
+	vccq-supply = <&vreg_l6a_1p2>;
+	vccq-max-microamp = <800000>;
+	vccq2-supply = <&vreg_s4a_1p8>;
+	vccq2-max-microamp = <800000>;
+
+	status = "okay";
+};
+
+&ufs_mem_phy {
+	vdda-phy-supply = <&vreg_l5a_0p88>;
+	vdda-pll-supply = <&vreg_l9a_1p2>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-samsung-r8q.dts b/arch/arm64/boot/dts/qcom/sm8250-samsung-r8q.dts
new file mode 100644
index 000000000000..dc7c3816f156
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-samsung-r8q.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "sm8250-samsung-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy S20 FE";
+	compatible = "samsung,r8q", "qcom,sm8250";
+	chassis-type = "handset";
+};
+
+&adsp {
+	firmware-name = "qcom/sm8250/Samsung/r8q/adsp.mbn";
+	status = "okay";
+};
+
+&cdsp {
+	firmware-name = "qcom/sm8250/Samsung/r8q/cdsp.mbn";
+	status = "okay";
+};
+
+&slpi {
+	firmware-name = "qcom/sm8250/Samsung/r8q/slpi.mbn";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-samsung-x1q.dts b/arch/arm64/boot/dts/qcom/sm8250-samsung-x1q.dts
new file mode 100644
index 000000000000..d6aeb5af2ba4
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8250-samsung-x1q.dts
@@ -0,0 +1,26 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include "sm8250-samsung-common.dtsi"
+
+/ {
+	model = "Samsung Galaxy S20";
+	compatible = "samsung,x1q", "qcom,sm8250";
+	chassis-type = "handset";
+};
+
+&adsp {
+	firmware-name = "qcom/sm8250/Samsung/x1q/adsp.mbn";
+	status = "okay";
+};
+
+&cdsp {
+	firmware-name = "qcom/sm8250/Samsung/x1q/cdsp.mbn";
+	status = "okay";
+};
+
+&slpi {
+	firmware-name = "qcom/sm8250/Samsung/x1q/slpi.mbn";
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts
index 668078ea4f04..4ad24974c09f 100644
--- a/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts
+++ b/arch/arm64/boot/dts/qcom/sm8250-xiaomi-pipa.dts
@@ -12,7 +12,6 @@
 #include "pm8150.dtsi"
 #include "pm8150b.dtsi"
 #include "pm8150l.dtsi"
-#include "pm8009.dtsi"
 
 /*
  * Delete following upstream (sm8250.dtsi) reserved
@@ -50,18 +49,12 @@
 		};
 	};
 
-	battery_l: battery-l {
+	battery: battery {
 		compatible = "simple-battery";
-		voltage-min-design-microvolt = <3870000>;
-		energy-full-design-microwatt-hours = <16700000>;
-		charge-full-design-microamp-hours = <4420000>;
-	};
-
-	battery_r: battery-r {
-		compatible = "simple-battery";
-		voltage-min-design-microvolt = <3870000>;
-		energy-full-design-microwatt-hours = <16700000>;
-		charge-full-design-microamp-hours = <4420000>;
+		charge-full-design-microamp-hours = <8840000>;
+		energy-full-design-microwatt-hours = <34300000>;
+		voltage-min-design-microvolt = <3400000>;
+		voltage-max-design-microvolt = <4370000>;
 	};
 
 	bl_vddpos_5p5: bl-vddpos-regulator {
@@ -406,63 +399,6 @@
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 	};
-
-	regulators-2 {
-		compatible = "qcom,pm8009-rpmh-regulators";
-		qcom,pmic-id = "f";
-
-		vdd-s1-supply = <&vph_pwr>;
-		vdd-s2-supply = <&vreg_bob>;
-		vdd-l2-supply = <&vreg_s8c_1p35>;
-		vdd-l5-l6-supply = <&vreg_bob>;
-		vdd-l7-supply = <&vreg_s4a_1p8>;
-
-		vreg_s1f_1p2: smps1 {
-			regulator-name = "vreg_s1f_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1300000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_s2f_0p5: smps2 {
-			regulator-name = "vreg_s2f_0p5";
-			regulator-min-microvolt = <512000>;
-			regulator-max-microvolt = <1100000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		/* L1 is unused. */
-
-		vreg_l2f_1p3: ldo2 {
-			regulator-name = "vreg_l2f_1p3";
-			regulator-min-microvolt = <1056000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		/* L3 & L4 are unused. */
-
-		vreg_l5f_2p8: ldo5 {
-			regulator-name = "vreg_l5f_2p85";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <3000000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l6f_2p8: ldo6 {
-			regulator-name = "vreg_l6f_2p8";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <3000000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l7f_1p8: ldo7 {
-			regulator-name = "vreg_l7f_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
 };
 
 &cdsp {
@@ -495,17 +431,6 @@
 	};
 };
 
-&i2c0 {
-	clock-frequency = <400000>;
-	status = "okay";
-
-	fuel-gauge@55 {
-		compatible = "ti,bq27z561";
-		reg = <0x55>;
-		monitored-battery = <&battery_r>;
-	};
-};
-
 &i2c11 {
 	clock-frequency = <400000>;
 	status = "okay";
@@ -523,17 +448,6 @@
 	};
 };
 
-&i2c13 {
-	clock-frequency = <400000>;
-	status = "okay";
-
-	fuel-gauge@55 {
-		compatible = "ti,bq27z561";
-		reg = <0x55>;
-		monitored-battery = <&battery_l>;
-	};
-};
-
 &pcie0 {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index b30aea8b0540..50dd11432bb2 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -1030,7 +1030,7 @@
 				dmas = <&gpi_dma2 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
 						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1075,7 +1075,7 @@
 				dmas = <&gpi_dma2 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
 						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1120,7 +1120,7 @@
 				dmas = <&gpi_dma2 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
 						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1165,7 +1165,7 @@
 				dmas = <&gpi_dma2 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
 						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1227,7 +1227,7 @@
 				dmas = <&gpi_dma2 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
 						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1289,7 +1289,7 @@
 				dmas = <&gpi_dma2 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma2 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_2 0 &qup_virt SLAVE_QUP_CORE_2 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_2 0>,
 						<&aggre1_noc MASTER_QUP_2 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1370,7 +1370,7 @@
 				dmas = <&gpi_dma0 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1415,7 +1415,7 @@
 				dmas = <&gpi_dma0 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1460,7 +1460,7 @@
 				dmas = <&gpi_dma0 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1522,7 +1522,7 @@
 				dmas = <&gpi_dma0 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1567,7 +1567,7 @@
 				dmas = <&gpi_dma0 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1612,7 +1612,7 @@
 				dmas = <&gpi_dma0 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1657,7 +1657,7 @@
 				dmas = <&gpi_dma0 0 6 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 6 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1719,7 +1719,7 @@
 				dmas = <&gpi_dma0 0 7 QCOM_GPI_I2C>,
 				       <&gpi_dma0 1 7 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_0 0 &qup_virt SLAVE_QUP_CORE_0 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_0 0>,
 						<&aggre2_noc MASTER_QUP_0 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1797,7 +1797,7 @@
 				dmas = <&gpi_dma1 0 0 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 0 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
 						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1842,7 +1842,7 @@
 				dmas = <&gpi_dma1 0 1 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 1 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
 						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1887,7 +1887,7 @@
 				dmas = <&gpi_dma1 0 2 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 2 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
 						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1932,7 +1932,7 @@
 				dmas = <&gpi_dma1 0 3 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 3 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
 						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -1977,7 +1977,7 @@
 				dmas = <&gpi_dma1 0 4 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 4 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
 						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -2039,7 +2039,7 @@
 				dmas = <&gpi_dma1 0 5 QCOM_GPI_I2C>,
 				       <&gpi_dma1 1 5 QCOM_GPI_I2C>;
 				dma-names = "tx", "rx";
-				power-domains = <&rpmhpd SM8250_CX>;
+				power-domains = <&rpmhpd RPMHPD_CX>;
 				interconnects = <&qup_virt MASTER_QUP_CORE_1 0 &qup_virt SLAVE_QUP_CORE_1 0>,
 						<&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_QUP_1 0>,
 						<&aggre1_noc MASTER_QUP_1 0 &mc_virt SLAVE_EBI_CH0 0>;
@@ -2163,10 +2163,10 @@
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
 				 <&gcc GCC_PCIE_0_AUX_CLK>,
@@ -2285,10 +2285,10 @@
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_1_PIPE_CLK>,
 				 <&gcc GCC_PCIE_1_AUX_CLK>,
@@ -2412,10 +2412,10 @@
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 290 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 415 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 416 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 417 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 415 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 416 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 417 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_2_PIPE_CLK>,
 				 <&gcc GCC_PCIE_2_AUX_CLK>,
@@ -4338,14 +4338,6 @@
 
 			status = "disabled";
 
-			video-decoder {
-				compatible = "venus-decoder";
-			};
-
-			video-encoder {
-				compatible = "venus-encoder";
-			};
-
 			venus_opp_table: opp-table {
 				compatible = "operating-points-v2";
 
@@ -4779,16 +4771,20 @@
 					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
 					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
 					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
-					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK>;
 				clock-names = "core_iface",
 					      "core_aux",
 					      "ctrl_link",
 					      "ctrl_link_iface",
-					      "stream_pixel";
+					      "stream_pixel",
+					      "stream_1_pixel";
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
-						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK_SRC>;
 				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 
 				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
@@ -4797,7 +4793,7 @@
 				#sound-dai-cells = <0>;
 
 				operating-points-v2 = <&dp_opp_table>;
-				power-domains = <&rpmhpd SM8250_MMCX>;
+				power-domains = <&rpmhpd RPMHPD_MMCX>;
 
 				status = "disabled";
 
@@ -6092,6 +6088,7 @@
 
 		intc: interrupt-controller@17a00000 {
 			compatible = "arm,gic-v3";
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			reg = <0x0 0x17a00000 0x0 0x10000>,     /* GICD */
diff --git a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
index f9de0e49fa24..24a8c91e9f70 100644
--- a/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8350-hdk.dts
@@ -385,15 +385,11 @@
 &mdss_dsi0 {
 	vdda-supply = <&vreg_l6b_1p2>;
 	status = "okay";
+};
 
-	ports {
-		port@1 {
-			endpoint {
-				remote-endpoint = <&lt9611_a>;
-				data-lanes = <0 1 2 3>;
-			};
-		};
-	};
+&mdss_dsi0_out {
+	remote-endpoint = <&lt9611_a>;
+	data-lanes = <0 1 2 3>;
 };
 
 &mdss_dsi0_phy  {
diff --git a/arch/arm64/boot/dts/qcom/sm8350.dtsi b/arch/arm64/boot/dts/qcom/sm8350.dtsi
index 9a4207ead615..fc4ce9d4977e 100644
--- a/arch/arm64/boot/dts/qcom/sm8350.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8350.dtsi
@@ -1551,10 +1551,10 @@
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
 				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
@@ -1662,10 +1662,10 @@
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
 				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
@@ -2876,16 +2876,20 @@
 					 <&dispcc DISP_CC_MDSS_DP_AUX_CLK>,
 					 <&dispcc DISP_CC_MDSS_DP_LINK_CLK>,
 					 <&dispcc DISP_CC_MDSS_DP_LINK_INTF_CLK>,
-					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>;
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK>,
+					 <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK>;
 				clock-names = "core_iface",
 					      "core_aux",
 					      "ctrl_link",
 					      "ctrl_link_iface",
-					      "stream_pixel";
+					      "stream_pixel",
+					      "stream_1_pixel";
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DP_LINK_CLK_SRC>,
-						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>;
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DP_PIXEL1_CLK_SRC>;
 				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 
 				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
@@ -3544,6 +3548,7 @@
 
 		intc: interrupt-controller@17a00000 {
 			compatible = "arm,gic-v3";
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			#redistributor-regions = <1>;
diff --git a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
index 2ff40a120aad..0c6aa7ddf432 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-hdk.dts
@@ -1199,11 +1199,6 @@
 	status = "okay";
 };
 
-&usb_1_dwc3 {
-	dr_mode = "otg";
-	usb-role-switch;
-};
-
 &usb_1_dwc3_hs {
 	remote-endpoint = <&pmic_glink_hs_in>;
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
index 8c39fbcaad80..56db5f79f59d 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8450-qrd.dts
@@ -28,6 +28,49 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	pmic-glink {
+		compatible = "qcom,sm8450-pmic-glink", "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 91 GPIO_ACTIVE_HIGH>;
+
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_hs_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss_in: endpoint {
+						remote-endpoint = <&usb_1_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_sbu: endpoint {
+					};
+				};
+
+			};
+		};
+	};
+
 	vph_pwr: vph-pwr-regulator {
 		compatible = "regulator-fixed";
 		regulator-name = "vph_pwr";
@@ -461,8 +504,8 @@
 	status = "okay";
 };
 
-&usb_1_dwc3 {
-	dr_mode = "peripheral";
+&usb_1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_hs_in>;
 };
 
 &usb_1_hsphy {
@@ -487,3 +530,7 @@
 	vdda-phy-supply = <&vreg_l6b_1p2>;
 	vdda-pll-supply = <&vreg_l1b_0p91>;
 };
+
+&usb_1_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss_in>;
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8450-samsung-r0q.dts b/arch/arm64/boot/dts/qcom/sm8450-samsung-r0q.dts
new file mode 100644
index 000000000000..880d74ae6032
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm8450-samsung-r0q.dts
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/dts-v1/;
+
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sm8450.dtsi"
+#include "pm8350.dtsi"
+#include "pm8350c.dtsi"
+
+/ {
+	model = "Samsung Galaxy S22 5G";
+	compatible = "samsung,r0q", "qcom,sm8450";
+	chassis-type = "handset";
+
+	chosen {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		framebuffer: framebuffer@b8000000 {
+			compatible = "simple-framebuffer";
+			reg = <0x0 0xb8000000 0x0 0x2b00000>;
+			width = <1080>;
+			height = <2340>;
+			stride = <(1080 * 4)>;
+			format = "a8r8g8b8";
+		};
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reserved-memory {
+		/*
+		 * The bootloader will only keep display hardware enabled
+		 * if this memory region is named exactly 'splash_region'
+		 */
+		splash-region@b8000000 {
+			reg = <0x0 0xb8000000 0x0 0x2b00000>;
+			no-map;
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8350-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+		vdd-s11-supply = <&vph_pwr>;
+		vdd-s12-supply = <&vph_pwr>;
+
+		vdd-l2-l7-supply = <&vreg_bob>;
+		vdd-l3-l5-supply = <&vreg_bob>;
+
+		vreg_l2b_3p07: ldo2 {
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_0p88: ldo5 {
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <888000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8350c-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+		vdd-s3-supply = <&vph_pwr>;
+		vdd-s4-supply = <&vph_pwr>;
+		vdd-s5-supply = <&vph_pwr>;
+		vdd-s6-supply = <&vph_pwr>;
+		vdd-s7-supply = <&vph_pwr>;
+		vdd-s8-supply = <&vph_pwr>;
+		vdd-s9-supply = <&vph_pwr>;
+		vdd-s10-supply = <&vph_pwr>;
+
+		vdd-l1-l12-supply = <&vreg_bob>;
+		vdd-l2-l8-supply = <&vreg_bob>;
+		vdd-l3-l4-l5-l7-l13-supply = <&vreg_bob>;
+		vdd-l6-l9-l11-supply = <&vreg_bob>;
+
+		vdd-bob-supply = <&vph_pwr>;
+
+		vreg_bob: bob {
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
+		vreg_l1c_1p8: ldo1 {
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <36 4>; /* SPI (not linked to anything) */
+};
+
+&usb_1 {
+	/* Keep USB 2.0 only for now */
+	qcom,select-utmi-as-pipe-clk;
+
+	dr_mode = "peripheral";
+	maximum-speed = "high-speed";
+	/* Remove USB3 phy */
+	phys = <&usb_1_hsphy>;
+	phy-names = "usb2-phy";
+
+	status = "okay";
+};
+
+&usb_1_hsphy {
+	vdda-pll-supply = <&vreg_l5b_0p88>;
+	vdda18-supply = <&vreg_l1c_1p8>;
+	vdda33-supply = <&vreg_l2b_3p07>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi
index cc1335a07a35..6bd315e10992 100644
--- a/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450-sony-xperia-nagara.dtsi
@@ -781,11 +781,8 @@
 };
 
 &usb_1 {
-	status = "okay";
-};
-
-&usb_1_dwc3 {
 	dr_mode = "peripheral";
+	status = "okay";
 };
 
 &usb_1_hsphy {
diff --git a/arch/arm64/boot/dts/qcom/sm8450.dtsi b/arch/arm64/boot/dts/qcom/sm8450.dtsi
index 33574ad706b9..23420e692472 100644
--- a/arch/arm64/boot/dts/qcom/sm8450.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8450.dtsi
@@ -1987,10 +1987,10 @@
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			interconnects = <&pcie_noc MASTER_PCIE_0 QCOM_ICC_TAG_ALWAYS
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
@@ -2151,10 +2151,10 @@
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
+					<0 0 0 2 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
+					<0 0 0 3 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
+					<0 0 0 4 &intc 0 0 GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
 
 			interconnects = <&pcie_noc MASTER_PCIE_1 QCOM_ICC_TAG_ALWAYS
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
@@ -3199,8 +3199,10 @@
 			reg = <0 0x0aaf0000 0 0x10000>;
 			clocks = <&rpmhcc RPMH_CXO_CLK>,
 				 <&gcc GCC_VIDEO_AHB_CLK>;
-			power-domains = <&rpmhpd RPMHPD_MMCX>;
-			required-opps = <&rpmhpd_opp_low_svs>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>,
+					<&rpmhpd RPMHPD_MXC>;
+			required-opps = <&rpmhpd_opp_low_svs>,
+					<&rpmhpd_opp_low_svs>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
@@ -3291,12 +3293,13 @@
 				 <&rpmhcc RPMH_CXO_CLK>,
 				 <&rpmhcc RPMH_CXO_CLK_A>,
 				 <&sleep_clk>;
-			power-domains = <&rpmhpd RPMHPD_MMCX>;
-			required-opps = <&rpmhpd_opp_low_svs>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>,
+					<&rpmhpd RPMHPD_MXC>;
+			required-opps = <&rpmhpd_opp_low_svs>,
+					<&rpmhpd_opp_low_svs>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
-			status = "disabled";
 		};
 
 		mdss: display-subsystem@ae00000 {
@@ -3431,16 +3434,20 @@
 					 <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
 					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
 					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
-					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK>;
 				clock-names = "core_iface",
 					      "core_aux",
 					      "ctrl_link",
 					      "ctrl_link_iface",
-					      "stream_pixel";
+					      "stream_pixel",
+					      "stream_1_pixel";
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
-						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>;
 				assigned-clock-parents = <&usb_1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 							 <&usb_1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 
 				phys = <&usb_1_qmpphy QMP_USB43DP_DP_PHY>;
@@ -5417,13 +5424,10 @@
 			};
 		};
 
-		usb_1: usb@a6f8800 {
-			compatible = "qcom,sm8450-dwc3", "qcom,dwc3";
-			reg = <0 0x0a6f8800 0 0x400>;
+		usb_1: usb@a600000 {
+			compatible = "qcom,sm8450-dwc3", "qcom,snps-dwc3";
+			reg = <0 0x0a600000 0 0xfc100>;
 			status = "disabled";
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
 
 			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
 				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
@@ -5442,12 +5446,14 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
+					      <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
 					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
 					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "pwr_event",
+			interrupt-names = "dwc_usb3",
+					  "pwr_event",
 					  "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
@@ -5461,36 +5467,32 @@
 					<&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_USB3_0 0>;
 			interconnect-names = "usb-ddr", "apps-usb";
 
-			usb_1_dwc3: usb@a600000 {
-				compatible = "snps,dwc3";
-				reg = <0 0x0a600000 0 0xcd00>;
-				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
-				iommus = <&apps_smmu 0x0 0x0>;
-				snps,dis_u2_susphy_quirk;
-				snps,dis_u3_susphy_quirk;
-				snps,dis_enblslpm_quirk;
-				snps,dis-u1-entry-quirk;
-				snps,dis-u2-entry-quirk;
-				phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
-				phy-names = "usb2-phy", "usb3-phy";
+			iommus = <&apps_smmu 0x0 0x0>;
+			snps,dis_u2_susphy_quirk;
+			snps,dis_u3_susphy_quirk;
+			snps,dis_enblslpm_quirk;
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
+			phys = <&usb_1_hsphy>, <&usb_1_qmpphy QMP_USB43DP_USB3_PHY>;
+			phy-names = "usb2-phy", "usb3-phy";
+			usb-role-switch;
 
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
 
-					port@0 {
-						reg = <0>;
+				port@0 {
+					reg = <0>;
 
-						usb_1_dwc3_hs: endpoint {
-						};
+					usb_1_dwc3_hs: endpoint {
 					};
+				};
 
-					port@1 {
-						reg = <1>;
+				port@1 {
+					reg = <1>;
 
-						usb_1_dwc3_ss: endpoint {
-							remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
-						};
+					usb_1_dwc3_ss: endpoint {
+						remote-endpoint = <&usb_1_qmpphy_usb_ss_in>;
 					};
 				};
 			};
diff --git a/arch/arm64/boot/dts/qcom/sm8550-hdk.dts b/arch/arm64/boot/dts/qcom/sm8550-hdk.dts
index 9dfb248f9ab5..b5d7f0cd443a 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-hdk.dts
@@ -859,8 +859,8 @@
 
 		vreg_l6n_3p3: ldo6 {
 			regulator-name = "vreg_l6n_3p3";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <3304000>;
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
@@ -1002,10 +1002,6 @@
 	status = "okay";
 };
 
-&mdss_dp0_out {
-	data-lanes = <0 1>;
-};
-
 &pcie0 {
 	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
 	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
index fdcecd41297d..38f2928f23cc 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-mtp.dts
@@ -626,8 +626,8 @@
 
 		vreg_l6n_3p3: ldo6 {
 			regulator-name = "vreg_l6n_3p3";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <3304000>;
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
@@ -738,10 +738,6 @@
 	status = "okay";
 };
 
-&mdss_dp0_out {
-	data-lanes = <0 1>;
-};
-
 &pcie0 {
 	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
 	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
index 49438a7e77ce..a3f4200a1145 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-qrd.dts
@@ -702,8 +702,8 @@
 
 		vreg_l6n_3p3: ldo6 {
 			regulator-name = "vreg_l6n_3p3";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <3304000>;
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
@@ -857,10 +857,6 @@
 	status = "okay";
 };
 
-&mdss_dp0_out {
-	data-lanes = <0 1>;
-};
-
 &pcie0 {
 	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
 	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts b/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts
index 7d29a57a2b54..b4ef40ae2cd9 100644
--- a/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts
+++ b/arch/arm64/boot/dts/qcom/sm8550-samsung-q5q.dts
@@ -487,8 +487,8 @@
 
 		vreg_l6n_3p3: ldo6 {
 			regulator-name = "vreg_l6n_3p3";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <3304000>;
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
 
diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index 45713d46f3c5..7724dba75db7 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -399,22 +399,22 @@
 
 	pmu-a510 {
 		compatible = "arm,cortex-a510-pmu";
-		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster0>;
 	};
 
 	pmu-a710 {
 		compatible = "arm,cortex-a710-pmu";
-		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster1>;
 	};
 
 	pmu-a715 {
 		compatible = "arm,cortex-a715-pmu";
-		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster2>;
 	};
 
 	pmu-x3 {
 		compatible = "arm,cortex-x3-pmu";
-		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW>;
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_LOW &ppi_cluster3>;
 	};
 
 	psci {
@@ -842,7 +842,7 @@
 		ipcc: mailbox@408000 {
 			compatible = "qcom,sm8550-ipcc", "qcom,ipcc";
 			reg = <0 0x00408000 0 0x1000>;
-			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-controller;
 			#interrupt-cells = <3>;
 			#mbox-cells = <2>;
@@ -852,18 +852,18 @@
 			compatible = "qcom,sm8550-gpi-dma", "qcom,sm6350-gpi-dma";
 			#dma-cells = <3>;
 			reg = <0 0x00800000 0 0x60000>;
-			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 591 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 592 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 595 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 596 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 599 IRQ_TYPE_LEVEL_HIGH 0>;
 			dma-channels = <12>;
 			dma-channel-mask = <0x3e>;
 			iommus = <&apps_smmu 0x436 0>;
@@ -891,7 +891,7 @@
 				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c8_data_clk>;
-				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
@@ -914,7 +914,7 @@
 				reg = <0 0x00880000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S0_CLK>;
-				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi8_data_clk>, <&qup_spi8_cs>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
@@ -941,7 +941,7 @@
 				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c9_data_clk>;
-				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
@@ -964,7 +964,7 @@
 				reg = <0 0x00884000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S1_CLK>;
-				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 583 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi9_data_clk>, <&qup_spi9_cs>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
@@ -991,7 +991,7 @@
 				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c10_data_clk>;
-				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
@@ -1014,7 +1014,7 @@
 				reg = <0 0x00888000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S2_CLK>;
-				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 584 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi10_data_clk>, <&qup_spi10_cs>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
@@ -1041,7 +1041,7 @@
 				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c11_data_clk>;
-				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
@@ -1064,7 +1064,7 @@
 				reg = <0 0x0088c000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S3_CLK>;
-				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 585 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi11_data_clk>, <&qup_spi11_cs>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
@@ -1091,7 +1091,7 @@
 				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c12_data_clk>;
-				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
@@ -1114,7 +1114,7 @@
 				reg = <0 0x00890000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S4_CLK>;
-				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi12_data_clk>, <&qup_spi12_cs>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
@@ -1141,7 +1141,7 @@
 				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c13_data_clk>;
-				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
@@ -1164,7 +1164,7 @@
 				reg = <0 0x00894000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S5_CLK>;
-				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi13_data_clk>, <&qup_spi13_cs>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
@@ -1191,7 +1191,7 @@
 				clocks = <&gcc GCC_QUPV3_WRAP2_S6_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart14_default>, <&qup_uart14_cts_rts>;
-				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 461 IRQ_TYPE_LEVEL_HIGH 0>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
@@ -1209,7 +1209,7 @@
 				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c15_data_clk>;
-				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
@@ -1232,7 +1232,7 @@
 				reg = <0 0x0089c000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP2_S7_CLK>;
-				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 462 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi15_data_clk>, <&qup_spi15_cs>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_2 QCOM_ICC_TAG_ALWAYS
@@ -1271,7 +1271,7 @@
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&hub_i2c0_data_clk>;
-				interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 464 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
@@ -1292,7 +1292,7 @@
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&hub_i2c1_data_clk>;
-				interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 465 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
@@ -1313,7 +1313,7 @@
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&hub_i2c2_data_clk>;
-				interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 466 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
@@ -1334,7 +1334,7 @@
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&hub_i2c3_data_clk>;
-				interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 467 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
@@ -1355,7 +1355,7 @@
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&hub_i2c4_data_clk>;
-				interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 468 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
@@ -1376,7 +1376,7 @@
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&hub_i2c5_data_clk>;
-				interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 469 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
@@ -1397,7 +1397,7 @@
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&hub_i2c6_data_clk>;
-				interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 470 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
@@ -1418,7 +1418,7 @@
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&hub_i2c7_data_clk>;
-				interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 471 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
@@ -1439,7 +1439,7 @@
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&hub_i2c8_data_clk>;
-				interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 472 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
@@ -1460,7 +1460,7 @@
 					 <&gcc GCC_QUPV3_I2C_CORE_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&hub_i2c9_data_clk>;
-				interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 473 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_0 QCOM_ICC_TAG_ALWAYS
@@ -1478,18 +1478,18 @@
 			compatible = "qcom,sm8550-gpi-dma", "qcom,sm6350-gpi-dma";
 			#dma-cells = <3>;
 			reg = <0 0x00a00000 0 0x60000>;
-			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 281 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 283 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 284 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 294 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 295 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 297 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 298 IRQ_TYPE_LEVEL_HIGH 0>;
 			dma-channels = <12>;
 			dma-channel-mask = <0x1e>;
 			iommus = <&apps_smmu 0xb6 0>;
@@ -1520,7 +1520,7 @@
 				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c0_data_clk>;
-				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
@@ -1543,7 +1543,7 @@
 				reg = <0 0x00a80000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S0_CLK>;
-				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi0_data_clk>, <&qup_spi0_cs>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
@@ -1570,7 +1570,7 @@
 				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c1_data_clk>;
-				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
@@ -1593,7 +1593,7 @@
 				reg = <0 0x00a84000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S1_CLK>;
-				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi1_data_clk>, <&qup_spi1_cs>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
@@ -1620,7 +1620,7 @@
 				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c2_data_clk>;
-				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
@@ -1643,7 +1643,7 @@
 				reg = <0 0x00a88000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S2_CLK>;
-				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi2_data_clk>, <&qup_spi2_cs>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
@@ -1670,7 +1670,7 @@
 				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c3_data_clk>;
-				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
@@ -1693,7 +1693,7 @@
 				reg = <0 0x00a8c000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S3_CLK>;
-				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi3_data_clk>, <&qup_spi3_cs>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
@@ -1720,7 +1720,7 @@
 				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c4_data_clk>;
-				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH 0>;
 				#address-cells = <1>;
 				#size-cells = <0>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
@@ -1743,7 +1743,7 @@
 				reg = <0 0x00a90000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S4_CLK>;
-				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi4_data_clk>, <&qup_spi4_cs>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
@@ -1770,7 +1770,7 @@
 				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c5_data_clk>;
-				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH 0>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
@@ -1793,7 +1793,7 @@
 				reg = <0 0x00a94000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S5_CLK>;
-				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi5_data_clk>, <&qup_spi5_cs>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
@@ -1820,7 +1820,7 @@
 				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_i2c6_data_clk>;
-				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH 0>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
 						<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
@@ -1843,7 +1843,7 @@
 				reg = <0 0x00a98000 0 0x4000>;
 				clock-names = "se";
 				clocks = <&gcc GCC_QUPV3_WRAP1_S6_CLK>;
-				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 363 IRQ_TYPE_LEVEL_HIGH 0>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_spi6_data_clk>, <&qup_spi6_cs>;
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
@@ -1870,7 +1870,7 @@
 				clocks = <&gcc GCC_QUPV3_WRAP1_S7_CLK>;
 				pinctrl-names = "default";
 				pinctrl-0 = <&qup_uart7_default>;
-				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 579 IRQ_TYPE_LEVEL_HIGH 0>;
 				interconnect-names = "qup-core", "qup-config";
 				interconnects = <&clk_virt MASTER_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS
 						 &clk_virt SLAVE_QUP_CORE_1 QCOM_ICC_TAG_ALWAYS>,
@@ -1961,15 +1961,15 @@
 			linux,pci-domain = <0>;
 			num-lanes = <2>;
 
-			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "msi0",
 					  "msi1",
 					  "msi2",
@@ -1981,10 +1981,10 @@
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH 0>, /* int_a */
+					<0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH 0>, /* int_b */
+					<0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH 0>, /* int_c */
+					<0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH 0>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
 				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
@@ -2122,15 +2122,15 @@
 			linux,pci-domain = <1>;
 			num-lanes = <2>;
 
-			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "msi0",
 					  "msi1",
 					  "msi2",
@@ -2142,10 +2142,10 @@
 					  "global";
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
-					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
-					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
-					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH 0>, /* int_a */
+					<0 0 0 2 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH 0>, /* int_b */
+					<0 0 0 3 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH 0>, /* int_c */
+					<0 0 0 4 &intc 0 0 GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH 0>; /* int_d */
 
 			clocks = <&gcc GCC_PCIE_1_AUX_CLK>,
 				 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
@@ -2280,7 +2280,7 @@
 		cryptobam: dma-controller@1dc4000 {
 			compatible = "qcom,bam-v1.7.4", "qcom,bam-v1.7.0";
 			reg = <0x0 0x01dc4000 0x0 0x28000>;
-			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH 0>;
 			#dma-cells = <1>;
 			qcom,ee = <0>;
 			qcom,num-ees = <4>;
@@ -2327,7 +2327,7 @@
 			compatible = "qcom,sm8550-ufshc", "qcom,ufshc",
 				     "jedec,ufs-2.0";
 			reg = <0x0 0x01d84000 0x0 0x3000>;
-			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH 0>;
 			phys = <&ufs_mem_phy>;
 			phy-names = "ufsphy";
 			lanes-per-direction = <2>;
@@ -2440,7 +2440,7 @@
 				    "cx_mem",
 				    "cx_dbgc";
 
-			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH 0>;
 
 			iommus = <&adreno_smmu 0 0x0>,
 				 <&adreno_smmu 1 0x0>;
@@ -2521,8 +2521,8 @@
 			      <0x0 0x0b280000 0x0 0x10000>;
 			reg-names = "gmu", "rscc", "gmu_pdc";
 
-			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "hfi", "gmu";
 
 			clocks = <&gpucc GPU_CC_AHB_CLK>,
@@ -2583,32 +2583,32 @@
 			reg = <0x0 0x03da0000 0x0 0x40000>;
 			#iommu-cells = <2>;
 			#global-interrupts = <1>;
-			interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 677 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 659 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 673 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 677 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 678 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 679 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 680 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 681 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 682 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 683 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 684 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 685 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 686 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 687 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 422 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 476 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 574 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 575 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 576 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 577 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 659 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 661 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 664 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 665 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 666 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 668 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 669 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 699 IRQ_TYPE_LEVEL_HIGH 0>;
 			clocks = <&gpucc GPU_CC_HLOS1_VOTE_GPU_SMMU_CLK>,
 				 <&gcc GCC_GPU_MEMNOC_GFX_CLK>,
 				 <&gcc GCC_GPU_SNOC_DVM_GFX_CLK>,
@@ -2633,8 +2633,8 @@
 				    "ipa-shared",
 				    "gsi";
 
-			interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING>,
-					      <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 654 IRQ_TYPE_EDGE_RISING 0>,
+					      <&intc GIC_SPI 432 IRQ_TYPE_LEVEL_HIGH 0>,
 					      <&ipa_smp2p_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&ipa_smp2p_in 1 IRQ_TYPE_EDGE_RISING>;
 			interrupt-names = "ipa",
@@ -2666,7 +2666,7 @@
 			compatible = "qcom,sm8550-mpss-pas";
 			reg = <0x0 0x04080000 0x0 0x10000>;
 
-			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING>,
+			interrupts-extended = <&intc GIC_SPI 264 IRQ_TYPE_EDGE_RISING 0>,
 					      <&smp2p_modem_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_modem_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -2854,7 +2854,7 @@
 		swr3: soundwire@6ab0000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06ab0000 0 0x10000>;
-			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH 0>;
 			clocks = <&lpass_wsa2macro>;
 			clock-names = "iface";
 			label = "WSA2";
@@ -2898,7 +2898,7 @@
 		swr1: soundwire@6ad0000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06ad0000 0 0x10000>;
-			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH 0>;
 			clocks = <&lpass_rxmacro>;
 			clock-names = "iface";
 			label = "RX";
@@ -2956,7 +2956,7 @@
 		swr0: soundwire@6b10000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06b10000 0 0x10000>;
-			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH 0>;
 			clocks = <&lpass_wsamacro>;
 			clock-names = "iface";
 			label = "WSA";
@@ -2986,8 +2986,8 @@
 		swr2: soundwire@6d30000 {
 			compatible = "qcom,soundwire-v2.0.0";
 			reg = <0 0x06d30000 0 0x10000>;
-			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 496 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 520 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "core", "wakeup";
 			clocks = <&lpass_txmacro>;
 			clock-names = "iface";
@@ -3169,8 +3169,8 @@
 			compatible = "qcom,sm8550-sdhci", "qcom,sdhci-msm-v5";
 			reg = <0 0x08804000 0 0x1000>;
 
-			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 223 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "hc_irq", "pwr_irq";
 
 			clocks = <&gcc GCC_SDCC2_AHB_CLK>,
@@ -3225,7 +3225,7 @@
 			compatible = "qcom,sm8550-iris";
 
 			reg = <0 0x0aa00000 0 0xf0000>;
-			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH 0>;
 
 			power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>,
 					<&videocc VIDEO_CC_MVS0_GDSC>,
@@ -3262,7 +3262,7 @@
 
 			/*
 			 * IRIS firmware is signed by vendors, only
-			 * enable in boards where the proper signed firmware
+			 * enable on boards where the proper signed firmware
 			 * is available.
 			 */
 			status = "disabled";
@@ -3307,8 +3307,10 @@
 			reg = <0 0x0aaf0000 0 0x10000>;
 			clocks = <&bi_tcxo_div2>,
 				 <&gcc GCC_VIDEO_AHB_CLK>;
-			power-domains = <&rpmhpd RPMHPD_MMCX>;
-			required-opps = <&rpmhpd_opp_low_svs>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>,
+					<&rpmhpd RPMHPD_MXC>;
+			required-opps = <&rpmhpd_opp_low_svs>,
+					<&rpmhpd_opp_low_svs>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
@@ -3317,7 +3319,7 @@
 		cci0: cci@ac15000 {
 			compatible = "qcom,sm8550-cci", "qcom,msm8996-cci";
 			reg = <0 0x0ac15000 0 0x1000>;
-			interrupts = <GIC_SPI 426 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 426 IRQ_TYPE_EDGE_RISING 0>;
 			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
 			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
 				 <&camcc CAM_CC_CPAS_AHB_CLK>,
@@ -3350,7 +3352,7 @@
 		cci1: cci@ac16000 {
 			compatible = "qcom,sm8550-cci", "qcom,msm8996-cci";
 			reg = <0 0x0ac16000 0 0x1000>;
-			interrupts = <GIC_SPI 427 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 427 IRQ_TYPE_EDGE_RISING 0>;
 			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
 			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
 				 <&camcc CAM_CC_CPAS_AHB_CLK>,
@@ -3376,7 +3378,7 @@
 		cci2: cci@ac17000 {
 			compatible = "qcom,sm8550-cci", "qcom,msm8996-cci";
 			reg = <0 0x0ac17000 0 0x1000>;
-			interrupts = <GIC_SPI 428 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 428 IRQ_TYPE_EDGE_RISING 0>;
 			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
 			clocks = <&camcc CAM_CC_CAMNOC_AXI_CLK>,
 				 <&camcc CAM_CC_CPAS_AHB_CLK>,
@@ -3521,24 +3523,24 @@
 				      "vfe_lite_cphy_rx",
 				      "vfe_lite_csid";
 
-			interrupts = <GIC_SPI 601 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 603 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 431 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 605 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 376 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 448 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 122 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 89 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 278 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 277 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 602 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 604 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 688 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 606 IRQ_TYPE_EDGE_RISING>,
-				     <GIC_SPI 377 IRQ_TYPE_EDGE_RISING>;
+			interrupts = <GIC_SPI 601 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 603 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 431 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 605 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 376 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 477 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 478 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 479 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 448 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 122 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 89 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 278 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 277 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 602 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 604 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 688 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 606 IRQ_TYPE_EDGE_RISING 0>,
+				     <GIC_SPI 377 IRQ_TYPE_EDGE_RISING 0>;
 			interrupt-names = "csid0",
 					  "csid1",
 					  "csid2",
@@ -3623,8 +3625,10 @@
 				 <&bi_tcxo_div2>,
 				 <&bi_tcxo_ao_div2>,
 				 <&sleep_clk>;
-			power-domains = <&rpmhpd SM8550_MMCX>;
-			required-opps = <&rpmhpd_opp_low_svs>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>,
+					<&rpmhpd RPMHPD_MXC>;
+			required-opps = <&rpmhpd_opp_low_svs>,
+					<&rpmhpd_opp_low_svs>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
@@ -3635,7 +3639,7 @@
 			reg = <0 0x0ae00000 0 0x1000>;
 			reg-names = "mdss";
 
-			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-controller;
 			#interrupt-cells = <1>;
 
@@ -3755,16 +3759,20 @@
 					 <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
 					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
 					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
-					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK>;
 				clock-names = "core_iface",
 					      "core_aux",
 					      "ctrl_link",
 					      "ctrl_link_iface",
-					      "stream_pixel";
+					      "stream_pixel",
+					      "stream_1_pixel";
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
-						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>;
 				assigned-clock-parents = <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 							 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 
 				phys = <&usb_dp_qmpphy QMP_USB43DP_DP_PHY>;
@@ -3791,6 +3799,7 @@
 					port@1 {
 						reg = <1>;
 						mdss_dp0_out: endpoint {
+							data-lanes = <0 1 2 3>;
 							remote-endpoint = <&usb_dp_qmpphy_dp_in>;
 						};
 					};
@@ -4051,6 +4060,7 @@
 			#clock-cells = <1>;
 			#phy-cells = <1>;
 
+			mode-switch;
 			orientation-switch;
 
 			status = "disabled";
@@ -4084,12 +4094,11 @@
 			};
 		};
 
-		usb_1: usb@a6f8800 {
-			compatible = "qcom,sm8550-dwc3", "qcom,dwc3";
-			reg = <0x0 0x0a6f8800 0x0 0x400>;
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
+		usb_1: usb@a600000 {
+			compatible = "qcom,sm8550-dwc3", "qcom,snps-dwc3";
+			reg = <0x0 0x0a600000 0x0 0xfc100>;
+			#address-cells = <1>;
+			#size-cells = <0>;
 
 			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
 				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
@@ -4108,12 +4117,14 @@
 					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
 			assigned-clock-rates = <19200000>, <200000000>;
 
-			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+			interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH 0>,
+					      <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH 0>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>,
 					      <&pdc 14 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 15 IRQ_TYPE_EDGE_BOTH>,
 					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "pwr_event",
+			interrupt-names = "dwc_usb3",
+					  "pwr_event",
 					  "hs_phy_irq",
 					  "dp_hs_phy_irq",
 					  "dm_hs_phy_irq",
@@ -4130,47 +4141,46 @@
 					 &config_noc SLAVE_USB3_0 QCOM_ICC_TAG_ACTIVE_ONLY>;
 			interconnect-names = "usb-ddr", "apps-usb";
 
-			status = "disabled";
+			iommus = <&apps_smmu 0x40 0x0>;
 
-			usb_1_dwc3: usb@a600000 {
-				compatible = "snps,dwc3";
-				reg = <0x0 0x0a600000 0x0 0xcd00>;
-				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
-				iommus = <&apps_smmu 0x40 0x0>;
-				phys = <&usb_1_hsphy>,
-				       <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
-				phy-names = "usb2-phy", "usb3-phy";
-				snps,hird-threshold = /bits/ 8 <0x0>;
-				snps,usb2-gadget-lpm-disable;
-				snps,dis_u2_susphy_quirk;
-				snps,dis_enblslpm_quirk;
-				snps,dis-u1-entry-quirk;
-				snps,dis-u2-entry-quirk;
-				snps,is-utmi-l1-suspend;
-				snps,usb3_lpm_capable;
-				snps,usb2-lpm-disable;
-				snps,has-lpm-erratum;
-				tx-fifo-resize;
-				dma-coherent;
-				usb-role-switch;
+			phys = <&usb_1_hsphy>,
+			       <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
+			phy-names = "usb2-phy", "usb3-phy";
 
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
+			snps,hird-threshold = /bits/ 8 <0x0>;
+			snps,usb2-gadget-lpm-disable;
+			snps,dis_u2_susphy_quirk;
+			snps,dis_enblslpm_quirk;
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
+			snps,is-utmi-l1-suspend;
+			snps,usb3_lpm_capable;
+			snps,usb2-lpm-disable;
+			snps,has-lpm-erratum;
+			tx-fifo-resize;
 
-					port@0 {
-						reg = <0>;
+			dma-coherent;
 
-						usb_1_dwc3_hs: endpoint {
-						};
+			usb-role-switch;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_dwc3_hs: endpoint {
 					};
+				};
 
-					port@1 {
-						reg = <1>;
+				port@1 {
+					reg = <1>;
 
-						usb_1_dwc3_ss: endpoint {
-							remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
-						};
+					usb_1_dwc3_ss: endpoint {
+						remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
 					};
 				};
 			};
@@ -4192,8 +4202,8 @@
 			reg = <0 0x0c271000 0 0x1000>, /* TM */
 			      <0 0x0c222000 0 0x1000>; /* SROT */
 			#qcom,sensors = <16>;
-			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 640 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "uplow", "critical";
 			#thermal-sensor-cells = <1>;
 		};
@@ -4203,8 +4213,8 @@
 			reg = <0 0x0c272000 0 0x1000>, /* TM */
 			      <0 0x0c223000 0 0x1000>; /* SROT */
 			#qcom,sensors = <16>;
-			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 641 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "uplow", "critical";
 			#thermal-sensor-cells = <1>;
 		};
@@ -4214,8 +4224,8 @@
 			reg = <0 0x0c273000 0 0x1000>, /* TM */
 			      <0 0x0c224000 0 0x1000>; /* SROT */
 			#qcom,sensors = <16>;
-			interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 642 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "uplow", "critical";
 			#thermal-sensor-cells = <1>;
 		};
@@ -4259,7 +4269,7 @@
 		tlmm: pinctrl@f100000 {
 			compatible = "qcom,sm8550-tlmm";
 			reg = <0 0x0f100000 0 0x300000>;
-			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH 0>;
 			gpio-controller;
 			#gpio-cells = <2>;
 			interrupt-controller;
@@ -4953,103 +4963,103 @@
 			reg = <0 0x15000000 0 0x100000>;
 			#iommu-cells = <2>;
 			#global-interrupts = <1>;
-			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 181 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 182 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 183 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 185 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 186 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 189 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 191 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 315 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 316 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 317 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 318 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 319 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 320 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 321 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 322 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 323 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 325 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 328 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 329 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 331 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 332 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 333 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 338 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 397 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 398 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 399 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 400 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 401 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 402 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 403 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 404 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 405 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 406 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 407 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 408 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 409 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 418 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 419 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 412 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 421 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 706 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 423 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 424 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 425 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 691 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH 0>;
 			dma-coherent;
 		};
 
@@ -5058,14 +5068,32 @@
 			reg = <0 0x17100000 0 0x10000>,		/* GICD */
 			      <0 0x17180000 0 0x200000>;	/* GICR * 8 */
 			ranges;
-			#interrupt-cells = <3>;
+			#interrupt-cells = <4>;
 			interrupt-controller;
 			#redistributor-regions = <1>;
 			redistributor-stride = <0 0x40000>;
-			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW 0>;
 			#address-cells = <2>;
 			#size-cells = <2>;
 
+			ppi-partitions {
+				ppi_cluster0: interrupt-partition-0 {
+					affinity = <&cpu0 &cpu1 &cpu2>;
+				};
+
+				ppi_cluster1: interrupt-partition-1 {
+					affinity = <&cpu3 &cpu4>;
+				};
+
+				ppi_cluster2: interrupt-partition-2 {
+					affinity = <&cpu5 &cpu6>;
+				};
+
+				ppi_cluster3: interrupt-partition-3 {
+					affinity = <&cpu7>;
+				};
+			};
+
 			gic_its: msi-controller@17140000 {
 				compatible = "arm,gic-v3-its";
 				reg = <0 0x17140000 0 0x20000>;
@@ -5085,49 +5113,49 @@
 				reg = <0x17421000 0x1000>,
 				      <0x17422000 0x1000>;
 				frame-number = <0>;
-				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
-					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH 0>,
+					     <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH 0>;
 			};
 
 			frame@17423000 {
 				reg = <0x17423000 0x1000>;
 				frame-number = <1>;
-				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
 				status = "disabled";
 			};
 
 			frame@17425000 {
 				reg = <0x17425000 0x1000>;
 				frame-number = <2>;
-				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH 0>;
 				status = "disabled";
 			};
 
 			frame@17427000 {
 				reg = <0x17427000 0x1000>;
 				frame-number = <3>;
-				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH 0>;
 				status = "disabled";
 			};
 
 			frame@17429000 {
 				reg = <0x17429000 0x1000>;
 				frame-number = <4>;
-				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH 0>;
 				status = "disabled";
 			};
 
 			frame@1742b000 {
 				reg = <0x1742b000 0x1000>;
 				frame-number = <5>;
-				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH 0>;
 				status = "disabled";
 			};
 
 			frame@1742d000 {
 				reg = <0x1742d000 0x1000>;
 				frame-number = <6>;
-				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+				interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH 0>;
 				status = "disabled";
 			};
 		};
@@ -5140,9 +5168,9 @@
 			      <0 0x17a20000 0 0x10000>,
 			      <0 0x17a30000 0 0x10000>;
 			reg-names = "drv-0", "drv-1", "drv-2", "drv-3";
-			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH 0>;
 			qcom,tcs-offset = <0xd00>;
 			qcom,drv-id = <2>;
 			qcom,tcs-config = <ACTIVE_TCS    3>, <SLEEP_TCS     2>,
@@ -5239,9 +5267,9 @@
 			reg-names = "freq-domain0", "freq-domain1", "freq-domain2";
 			clocks = <&bi_tcxo_div2>, <&gcc GCC_GPLL0>;
 			clock-names = "xo", "alternate";
-			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>,
-				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH 0>,
+				     <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-names = "dcvsh-irq-0", "dcvsh-irq-1", "dcvsh-irq-2";
 			#freq-domain-cells = <1>;
 			#clock-cells = <1>;
@@ -5250,7 +5278,7 @@
 		pmu@24091000 {
 			compatible = "qcom,sm8550-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
 			reg = <0 0x24091000 0 0x1000>;
-			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH 0>;
 			interconnects = <&mc_virt MASTER_LLCC QCOM_ICC_TAG_ACTIVE_ONLY
 					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
 
@@ -5300,7 +5328,7 @@
 		pmu@240b6400 {
 			compatible = "qcom,sm8550-cpu-bwmon", "qcom,sdm845-bwmon";
 			reg = <0 0x240b6400 0 0x600>;
-			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH 0>;
 			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
 					 &gem_noc SLAVE_LLCC QCOM_ICC_TAG_ACTIVE_ONLY>;
 
@@ -5356,7 +5384,7 @@
 				    "llcc3_base",
 				    "llcc_broadcast_base",
 				    "llcc_broadcast_and_base";
-			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>;
+			interrupts = <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH 0>;
 		};
 
 		nsp_noc: interconnect@320c0000 {
@@ -5370,7 +5398,7 @@
 			compatible = "qcom,sm8550-cdsp-pas";
 			reg = <0x0 0x32300000 0x0 0x10000>;
 
-			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING>,
+			interrupts-extended = <&intc GIC_SPI 578 IRQ_TYPE_EDGE_RISING 0>,
 					      <&smp2p_cdsp_in 0 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 1 IRQ_TYPE_EDGE_RISING>,
 					      <&smp2p_cdsp_in 2 IRQ_TYPE_EDGE_RISING>,
@@ -6552,9 +6580,9 @@
 
 	timer {
 		compatible = "arm,armv8-timer";
-		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>,
-			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
+		interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
+			     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
+			     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>,
+			     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW) 0>;
 	};
 };
diff --git a/arch/arm64/boot/dts/qcom/sm8650-hdk-display-card.dtso b/arch/arm64/boot/dts/qcom/sm8650-hdk-display-card.dtso
index cb102535838d..5a594d7311a7 100644
--- a/arch/arm64/boot/dts/qcom/sm8650-hdk-display-card.dtso
+++ b/arch/arm64/boot/dts/qcom/sm8650-hdk-display-card.dtso
@@ -60,19 +60,10 @@
 			};
 		};
 	};
+};
 
-	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@1 {
-			reg = <1>;
-
-			mdss_dsi0_out: endpoint {
-				remote-endpoint = <&panel0_in>;
-			};
-		};
-	};
+&mdss_dsi0_out {
+	remote-endpoint = <&panel0_in>;
 };
 
 &spi4 {
diff --git a/arch/arm64/boot/dts/qcom/sm8650-hdk.dts b/arch/arm64/boot/dts/qcom/sm8650-hdk.dts
index 259649d7dcd7..87d7190dc991 100644
--- a/arch/arm64/boot/dts/qcom/sm8650-hdk.dts
+++ b/arch/arm64/boot/dts/qcom/sm8650-hdk.dts
@@ -941,10 +941,6 @@
 	status = "okay";
 };
 
-&mdss_dp0_out {
-	data-lanes = <0 1>;
-};
-
 &pcie0 {
 	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
 	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
@@ -1050,10 +1046,6 @@
 	vdd3-supply = <&vreg_l5b_3p1>;
 };
 
-&pmk8550_rtc {
-	status = "okay";
-};
-
 &pon_pwrkey {
 	status = "okay";
 };
@@ -1310,12 +1302,10 @@
  */
 
 &usb_1 {
-	status = "okay";
-};
-
-&usb_1_dwc3 {
 	dr_mode = "otg";
 	usb-role-switch;
+
+	status = "okay";
 };
 
 &usb_1_dwc3_hs {
diff --git a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
index 8a957adbfb38..c67bbace2743 100644
--- a/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8650-mtp.dts
@@ -857,12 +857,10 @@
  */
 
 &usb_1 {
-	status = "okay";
-};
-
-&usb_1_dwc3 {
 	dr_mode = "otg";
 	usb-role-switch;
+
+	status = "okay";
 };
 
 &usb_1_dwc3_hs {
diff --git a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts
index 7552d5d3fb40..9e790cf44804 100644
--- a/arch/arm64/boot/dts/qcom/sm8650-qrd.dts
+++ b/arch/arm64/boot/dts/qcom/sm8650-qrd.dts
@@ -892,10 +892,6 @@
 	status = "okay";
 };
 
-&mdss_dp0_out {
-	data-lanes = <0 1>;
-};
-
 &pcie0 {
 	wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
 	perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
@@ -1006,10 +1002,6 @@
 	vdd3-supply = <&vreg_l5b_3p1>;
 };
 
-&pmk8550_rtc {
-	status = "okay";
-};
-
 &qup_i2c3_data_clk {
 	/* Use internal I2C pull-up */
 	bias-pull-up = <2200>;
@@ -1293,12 +1285,10 @@
  */
 
 &usb_1 {
-	status = "okay";
-};
-
-&usb_1_dwc3 {
 	dr_mode = "otg";
 	usb-role-switch;
+
+	status = "okay";
 };
 
 &usb_1_dwc3_hs {
diff --git a/arch/arm64/boot/dts/qcom/sm8650.dtsi b/arch/arm64/boot/dts/qcom/sm8650.dtsi
index e14d3d778b71..ebf1971b1bfb 100644
--- a/arch/arm64/boot/dts/qcom/sm8650.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8650.dtsi
@@ -3490,6 +3490,11 @@
 			};
 		};
 
+		rng: rng@10c3000 {
+			compatible = "qcom,sm8650-trng", "qcom,trng";
+			reg = <0 0x010c3000 0 0x1000>;
+		};
+
 		cnoc_main: interconnect@1500000 {
 			compatible = "qcom,sm8650-cnoc-main";
 			reg = <0 0x01500000 0 0x14080>;
@@ -3561,11 +3566,6 @@
 			#interconnect-cells = <2>;
 		};
 
-		rng: rng@10c3000 {
-			compatible = "qcom,sm8650-trng", "qcom,trng";
-			reg = <0 0x010c3000 0 0x1000>;
-		};
-
 		pcie0: pcie@1c00000 {
 			device_type = "pci";
 			compatible = "qcom,pcie-sm8650", "qcom,pcie-sm8550";
@@ -3629,10 +3629,10 @@
 			iommu-map = <0     &apps_smmu 0x1400 0x1>,
 				    <0x100 &apps_smmu 0x1401 0x1>;
 
-			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH 0>,
-					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH 0>,
-					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH 0>,
-					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-map-mask = <0 0 0 0x7>;
 			#interrupt-cells = <1>;
 
@@ -3809,10 +3809,10 @@
 			iommu-map = <0     &apps_smmu 0x1480 0x1>,
 				    <0x100 &apps_smmu 0x1481 0x1>;
 
-			interrupt-map = <0 0 0 1 &intc 0 0 0 434 IRQ_TYPE_LEVEL_HIGH 0>,
-					<0 0 0 2 &intc 0 0 0 435 IRQ_TYPE_LEVEL_HIGH 0>,
-					<0 0 0 3 &intc 0 0 0 438 IRQ_TYPE_LEVEL_HIGH 0>,
-					<0 0 0 4 &intc 0 0 0 439 IRQ_TYPE_LEVEL_HIGH 0>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH 0>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH 0>;
 			interrupt-map-mask = <0 0 0 0x7>;
 			#interrupt-cells = <1>;
 
@@ -3926,38 +3926,6 @@
 			status = "disabled";
 		};
 
-		cryptobam: dma-controller@1dc4000 {
-			compatible = "qcom,bam-v1.7.0";
-			reg = <0 0x01dc4000 0 0x28000>;
-
-			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH 0>;
-
-			#dma-cells = <1>;
-
-			iommus = <&apps_smmu 0x480 0>,
-				 <&apps_smmu 0x481 0>;
-
-			qcom,ee = <0>;
-			qcom,num-ees = <4>;
-			num-channels = <20>;
-			qcom,controlled-remotely;
-		};
-
-		crypto: crypto@1dfa000 {
-			compatible = "qcom,sm8650-qce", "qcom,sm8150-qce", "qcom,qce";
-			reg = <0 0x01dfa000 0 0x6000>;
-
-			interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
-					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
-			interconnect-names = "memory";
-
-			dmas = <&cryptobam 4>, <&cryptobam 5>;
-			dma-names = "rx", "tx";
-
-			iommus = <&apps_smmu 0x480 0>,
-				 <&apps_smmu 0x481 0>;
-		};
-
 		ufs_mem_phy: phy@1d80000 {
 			compatible = "qcom,sm8650-qmp-ufs-phy";
 			reg = <0 0x01d80000 0 0x2000>;
@@ -4079,6 +4047,38 @@
 			clocks = <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
 		};
 
+		cryptobam: dma-controller@1dc4000 {
+			compatible = "qcom,bam-v1.7.0";
+			reg = <0 0x01dc4000 0 0x28000>;
+
+			interrupts = <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			#dma-cells = <1>;
+
+			iommus = <&apps_smmu 0x480 0>,
+				 <&apps_smmu 0x481 0>;
+
+			qcom,ee = <0>;
+			qcom,num-ees = <4>;
+			num-channels = <20>;
+			qcom,controlled-remotely;
+		};
+
+		crypto: crypto@1dfa000 {
+			compatible = "qcom,sm8650-qce", "qcom,sm8150-qce", "qcom,qce";
+			reg = <0 0x01dfa000 0 0x6000>;
+
+			interconnects = <&aggre2_noc MASTER_CRYPTO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "memory";
+
+			dmas = <&cryptobam 4>, <&cryptobam 5>;
+			dma-names = "rx", "tx";
+
+			iommus = <&apps_smmu 0x480 0>,
+				 <&apps_smmu 0x481 0>;
+		};
+
 		tcsr_mutex: hwlock@1f40000 {
 			compatible = "qcom,tcsr-mutex";
 			reg = <0 0x01f40000 0 0x20000>;
@@ -4127,72 +4127,84 @@
 
 			/* Speedbin needs more work on A740+, keep only lower freqs */
 			gpu_opp_table: opp-table {
-				compatible = "operating-points-v2";
+				compatible = "operating-points-v2-adreno",
+					     "operating-points-v2";
 
 				opp-231000000 {
 					opp-hz = /bits/ 64 <231000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D2>;
 					opp-peak-kBps = <2136718>;
+					qcom,opp-acd-level = <0xc82f5ffd>;
 				};
 
 				opp-310000000 {
 					opp-hz = /bits/ 64 <310000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
 					opp-peak-kBps = <2136718>;
+					qcom,opp-acd-level = <0xc82c5ffd>;
 				};
 
 				opp-366000000 {
 					opp-hz = /bits/ 64 <366000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D0>;
 					opp-peak-kBps = <6074218>;
+					qcom,opp-acd-level = <0xc02e5ffd>;
 				};
 
 				opp-422000000 {
 					opp-hz = /bits/ 64 <422000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
 					opp-peak-kBps = <8171875>;
+					qcom,opp-acd-level = <0xc02d5ffd>;
 				};
 
 				opp-500000000 {
 					opp-hz = /bits/ 64 <500000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_L1>;
 					opp-peak-kBps = <8171875>;
+					qcom,opp-acd-level = <0xc02a5ffd>;
 				};
 
 				opp-578000000 {
 					opp-hz = /bits/ 64 <578000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
 					opp-peak-kBps = <8171875>;
+					qcom,opp-acd-level = <0x882c5ffd>;
 				};
 
 				opp-629000000 {
 					opp-hz = /bits/ 64 <629000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L0>;
 					opp-peak-kBps = <10687500>;
+					qcom,opp-acd-level = <0x882a5ffd>;
 				};
 
 				opp-680000000 {
 					opp-hz = /bits/ 64 <680000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
 					opp-peak-kBps = <12449218>;
+					qcom,opp-acd-level = <0x882a5ffd>;
 				};
 
 				opp-720000000 {
 					opp-hz = /bits/ 64 <720000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
 					opp-peak-kBps = <12449218>;
+					qcom,opp-acd-level = <0x882a5ffd>;
 				};
 
 				opp-770000000 {
 					opp-hz = /bits/ 64 <770000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
 					opp-peak-kBps = <12449218>;
+					qcom,opp-acd-level = <0x882a5ffd>;
 				};
 
 				opp-834000000 {
 					opp-hz = /bits/ 64 <834000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
 					opp-peak-kBps = <14398437>;
+					qcom,opp-acd-level = <0x882a5ffd>;
 				};
 			};
 		};
@@ -4962,6 +4974,171 @@
 			};
 		};
 
+		usb_1_hsphy: phy@88e3000 {
+			compatible = "qcom,sm8650-snps-eusb2-phy",
+				     "qcom,sm8550-snps-eusb2-phy";
+			reg = <0 0x088e3000 0 0x154>;
+
+			clocks = <&tcsr TCSR_USB2_CLKREF_EN>;
+			clock-names = "ref";
+
+			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
+		usb_dp_qmpphy: phy@88e8000 {
+			compatible = "qcom,sm8650-qmp-usb3-dp-phy";
+			reg = <0 0x088e8000 0 0x3000>;
+
+			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
+				 <&rpmhcc RPMH_CXO_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
+				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
+			clock-names = "aux",
+				      "ref",
+				      "com_aux",
+				      "usb3_pipe";
+
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
+			reset-names = "phy",
+				      "common";
+
+			power-domains = <&gcc USB3_PHY_GDSC>;
+
+			#clock-cells = <1>;
+			#phy-cells = <1>;
+
+			mode-switch;
+			orientation-switch;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_dp_qmpphy_out: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_dp_qmpphy_usb_ss_in: endpoint {
+						remote-endpoint = <&usb_1_dwc3_ss>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					usb_dp_qmpphy_dp_in: endpoint {
+						remote-endpoint = <&mdss_dp0_out>;
+					};
+				};
+			};
+		};
+
+		usb_1: usb@a600000 {
+			compatible = "qcom,sm8650-dwc3", "qcom,snps-dwc3";
+			reg = <0 0x0a600000 0 0xfc100>;
+
+			interrupts-extended = <&intc GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH 0>,
+					      <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH 0>,
+					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>,
+					      <&pdc 14 IRQ_TYPE_EDGE_RISING>,
+					      <&pdc 15 IRQ_TYPE_EDGE_RISING>,
+					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "dwc_usb3",
+					  "pwr_event",
+					  "hs_phy_irq",
+					  "dp_hs_phy_irq",
+					  "dm_hs_phy_irq",
+					  "ss_phy_irq";
+
+			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
+				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
+				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
+				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+				 <&tcsr TCSR_USB3_CLKREF_EN>;
+			clock-names = "cfg_noc",
+				      "core",
+				      "iface",
+				      "sleep",
+				      "mock_utmi",
+				      "xo";
+
+			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
+					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
+			assigned-clock-rates = <19200000>, <200000000>;
+
+			resets = <&gcc GCC_USB30_PRIM_BCR>;
+
+			phys = <&usb_1_hsphy>,
+			       <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
+			phy-names = "usb2-phy",
+				    "usb3-phy";
+
+			interconnects = <&aggre1_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_USB3_0 QCOM_ICC_TAG_ACTIVE_ONLY>;
+			interconnect-names = "usb-ddr",
+					     "apps-usb";
+
+			iommus = <&apps_smmu 0x40 0>;
+
+			power-domains = <&gcc USB30_PRIM_GDSC>;
+			required-opps = <&rpmhpd_opp_nom>;
+
+			snps,hird-threshold = /bits/ 8 <0x0>;
+			snps,usb2-gadget-lpm-disable;
+			snps,dis_u2_susphy_quirk;
+			snps,dis_enblslpm_quirk;
+			snps,dis-u1-entry-quirk;
+			snps,dis-u2-entry-quirk;
+			snps,is-utmi-l1-suspend;
+			snps,usb3_lpm_capable;
+			snps,usb2-lpm-disable;
+			snps,has-lpm-erratum;
+			tx-fifo-resize;
+
+			dma-coherent;
+
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usb_1_dwc3_hs: endpoint {
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usb_1_dwc3_ss: endpoint {
+						remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
+					};
+				};
+			};
+		};
+
 		iris: video-codec@aa00000 {
 			compatible = "qcom,sm8650-iris";
 			reg = <0 0x0aa00000 0 0xf0000>;
@@ -5009,7 +5186,7 @@
 
 			/*
 			 * IRIS firmware is signed by vendors, only
-			 * enable in boards where the proper signed firmware
+			 * enable on boards where the proper signed firmware
 			 * is available.
 			 */
 			status = "disabled";
@@ -5060,7 +5237,8 @@
 			reg = <0 0x0aaf0000 0 0x10000>;
 			clocks = <&bi_tcxo_div2>,
 				 <&gcc GCC_VIDEO_AHB_CLK>;
-			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>,
+					<&rpmhpd RPMHPD_MXC>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
@@ -5172,7 +5350,8 @@
 				 <&bi_tcxo_div2>,
 				 <&bi_tcxo_ao_div2>,
 				 <&sleep_clk>;
-			power-domains = <&rpmhpd RPMHPD_MMCX>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>,
+					<&rpmhpd RPMHPD_MXC>;
 			#clock-cells = <1>;
 			#reset-cells = <1>;
 			#power-domain-cells = <1>;
@@ -5481,16 +5660,20 @@
 					 <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
 					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
 					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
-					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK>;
 				clock-names = "core_iface",
 					      "core_aux",
 					      "ctrl_link",
 					      "ctrl_link_iface",
-					      "stream_pixel";
+					      "stream_pixel",
+					      "stream_1_pixel";
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
-						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>;
 				assigned-clock-parents = <&usb_dp_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 							 <&usb_dp_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 
 				operating-points-v2 = <&dp_opp_table>;
@@ -5544,6 +5727,7 @@
 						reg = <1>;
 
 						mdss_dp0_out: endpoint {
+							data-lanes = <0 1 2 3>;
 							remote-endpoint = <&usb_dp_qmpphy_dp_in>;
 						};
 					};
@@ -5580,176 +5764,6 @@
 			#power-domain-cells = <1>;
 		};
 
-		usb_1_hsphy: phy@88e3000 {
-			compatible = "qcom,sm8650-snps-eusb2-phy",
-				     "qcom,sm8550-snps-eusb2-phy";
-			reg = <0 0x088e3000 0 0x154>;
-
-			clocks = <&tcsr TCSR_USB2_CLKREF_EN>;
-			clock-names = "ref";
-
-			resets = <&gcc GCC_QUSB2PHY_PRIM_BCR>;
-
-			#phy-cells = <0>;
-
-			status = "disabled";
-		};
-
-		usb_dp_qmpphy: phy@88e8000 {
-			compatible = "qcom,sm8650-qmp-usb3-dp-phy";
-			reg = <0 0x088e8000 0 0x3000>;
-
-			clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
-				 <&rpmhcc RPMH_CXO_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>,
-				 <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-			clock-names = "aux",
-				      "ref",
-				      "com_aux",
-				      "usb3_pipe";
-
-			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
-				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
-			reset-names = "phy",
-				      "common";
-
-			power-domains = <&gcc USB3_PHY_GDSC>;
-
-			#clock-cells = <1>;
-			#phy-cells = <1>;
-
-			orientation-switch;
-
-			status = "disabled";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-
-					usb_dp_qmpphy_out: endpoint {
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-
-					usb_dp_qmpphy_usb_ss_in: endpoint {
-						remote-endpoint = <&usb_1_dwc3_ss>;
-					};
-				};
-
-				port@2 {
-					reg = <2>;
-
-					usb_dp_qmpphy_dp_in: endpoint {
-						remote-endpoint = <&mdss_dp0_out>;
-					};
-				};
-			};
-		};
-
-		usb_1: usb@a6f8800 {
-			compatible = "qcom,sm8650-dwc3", "qcom,dwc3";
-			reg = <0 0x0a6f8800 0 0x400>;
-
-			interrupts-extended = <&intc GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH 0>,
-					      <&intc GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH 0>,
-					      <&pdc 14 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 15 IRQ_TYPE_EDGE_RISING>,
-					      <&pdc 17 IRQ_TYPE_LEVEL_HIGH>;
-			interrupt-names = "pwr_event",
-					  "hs_phy_irq",
-					  "dp_hs_phy_irq",
-					  "dm_hs_phy_irq",
-					  "ss_phy_irq";
-
-			clocks = <&gcc GCC_CFG_NOC_USB3_PRIM_AXI_CLK>,
-				 <&gcc GCC_USB30_PRIM_MASTER_CLK>,
-				 <&gcc GCC_AGGRE_USB3_PRIM_AXI_CLK>,
-				 <&gcc GCC_USB30_PRIM_SLEEP_CLK>,
-				 <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
-				 <&tcsr TCSR_USB3_CLKREF_EN>;
-			clock-names = "cfg_noc",
-				      "core",
-				      "iface",
-				      "sleep",
-				      "mock_utmi",
-				      "xo";
-
-			assigned-clocks = <&gcc GCC_USB30_PRIM_MOCK_UTMI_CLK>,
-					  <&gcc GCC_USB30_PRIM_MASTER_CLK>;
-			assigned-clock-rates = <19200000>, <200000000>;
-
-			resets = <&gcc GCC_USB30_PRIM_BCR>;
-
-			interconnects = <&aggre1_noc MASTER_USB3_0 QCOM_ICC_TAG_ALWAYS
-					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
-					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
-					 &config_noc SLAVE_USB3_0 QCOM_ICC_TAG_ACTIVE_ONLY>;
-			interconnect-names = "usb-ddr",
-					     "apps-usb";
-
-			power-domains = <&gcc USB30_PRIM_GDSC>;
-			required-opps = <&rpmhpd_opp_nom>;
-
-			#address-cells = <2>;
-			#size-cells = <2>;
-			ranges;
-
-			status = "disabled";
-
-			usb_1_dwc3: usb@a600000 {
-				compatible = "snps,dwc3";
-				reg = <0 0x0a600000 0 0xcd00>;
-
-				interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH 0>;
-
-				iommus = <&apps_smmu 0x40 0>;
-
-				phys = <&usb_1_hsphy>,
-				       <&usb_dp_qmpphy QMP_USB43DP_USB3_PHY>;
-				phy-names = "usb2-phy",
-					    "usb3-phy";
-
-				snps,hird-threshold = /bits/ 8 <0x0>;
-				snps,usb2-gadget-lpm-disable;
-				snps,dis_u2_susphy_quirk;
-				snps,dis_enblslpm_quirk;
-				snps,dis-u1-entry-quirk;
-				snps,dis-u2-entry-quirk;
-				snps,is-utmi-l1-suspend;
-				snps,usb3_lpm_capable;
-				snps,usb2-lpm-disable;
-				snps,has-lpm-erratum;
-				tx-fifo-resize;
-
-				dma-coherent;
-
-				ports {
-					#address-cells = <1>;
-					#size-cells = <0>;
-
-					port@0 {
-						reg = <0>;
-
-						usb_1_dwc3_hs: endpoint {
-						};
-					};
-
-					port@1 {
-						reg = <1>;
-
-						usb_1_dwc3_ss: endpoint {
-							remote-endpoint = <&usb_dp_qmpphy_usb_ss_in>;
-						};
-					};
-				};
-			};
-		};
-
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sm8650-pdc", "qcom,pdc";
 			reg = <0 0x0b220000 0 0x30000>, <0 0x174000f0 0 0x64>;
diff --git a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
index 75cfbb510be5..3bbb53b7c71f 100644
--- a/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
+++ b/arch/arm64/boot/dts/qcom/sm8750-mtp.dts
@@ -201,6 +201,74 @@
 		regulator-always-on;
 		regulator-boot-on;
 	};
+
+	/*
+	 * MTPs rev 2.0 (power grid v8) come with two different WiFi chips:
+	 * WCN7850 and WCN786x.
+	 * Device nodes here for the PMU, WiFi and Bluetooth describe the MTP
+	 * variant with WCN7850.
+	 */
+	wcn7850-pmu {
+		compatible = "qcom,wcn7850-pmu";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wlan_en>, <&bt_default>;
+
+		wlan-enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&pm8550ve_f_gpios 3 GPIO_ACTIVE_HIGH>;
+
+		vdd-supply = <&vreg_s5f_0p85>;
+		vddio-supply = <&vreg_l3f_1p8>;
+		vddio1p2-supply = <&vreg_l2f_1p2>;
+		vddaon-supply = <&vreg_s4d_0p85>;
+		vdddig-supply = <&vreg_s1d_0p97>;
+		vddrfa1p2-supply = <&vreg_s7i_1p2>;
+		vddrfa1p8-supply = <&vreg_s3g_1p8>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK1>;
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -426,7 +494,7 @@
 
 		vreg_s4d_0p85: smps4 {
 			regulator-name = "vreg_s4d_0p85";
-			regulator-min-microvolt = <500000>;
+			regulator-min-microvolt = <852000>;
 			regulator-max-microvolt = <1036000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
@@ -472,9 +540,9 @@
 
 		qcom,pmic-id = "f";
 
-		vreg_s5f_0p5: smps5 {
-			regulator-name = "vreg_s5f_0p5";
-			regulator-min-microvolt = <500000>;
+		vreg_s5f_0p85: smps5 {
+			regulator-name = "vreg_s5f_0p85";
+			regulator-min-microvolt = <852000>;
 			regulator-max-microvolt = <1000000>;
 			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
 		};
@@ -891,6 +959,40 @@
 	status = "okay";
 };
 
+&pcie0 {
+	wake-gpios = <&tlmm 104 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&tlmm 102 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie0_default_state>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie0_phy {
+	vdda-phy-supply = <&vreg_l1f_0p88>;
+	vdda-pll-supply = <&vreg_l3g_1p2>;
+
+	status = "okay";
+};
+
+&pcieport0 {
+	wifi@0 {
+		compatible = "pci17cb,1107";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+	};
+};
+
 &pmih0108_eusb2_repeater {
 	status = "okay";
 
@@ -902,6 +1004,10 @@
 	status = "okay";
 };
 
+&qupv3_2 {
+	status = "okay";
+};
+
 &remoteproc_adsp {
 	firmware-name = "qcom/sm8750/adsp.mbn",
 			"qcom/sm8750/adsp_dtb.mbn";
@@ -938,6 +1044,13 @@
 		sound-name-prefix = "SpkrLeft";
 		#thermal-sensor-cells = <0>;
 		vdd-supply = <&vreg_l15b_1p8>;
+		/*
+		 * WSA8835 Port 1 (DAC)     <=> SWR0 Port 1 (SPKR_L)
+		 * WSA8835 Port 2 (COMP)    <=> SWR0 Port 2 (SPKR_L_COMP)
+		 * WSA8835 Port 3 (BOOST)   <=> SWR0 Port 3 (SPKR_L_BOOST)
+		 * WSA8835 Port 4 (VISENSE) <=> SWR0 Port 10 (SPKR_L_VI)
+		 */
+		qcom,port-mapping = <1 2 3 10>;
 	};
 
 	/* WSA883x, right/back speaker */
@@ -951,6 +1064,13 @@
 		sound-name-prefix = "SpkrRight";
 		#thermal-sensor-cells = <0>;
 		vdd-supply = <&vreg_l15b_1p8>;
+		/*
+		 * WSA8835 Port 1 (DAC)     <=> SWR0 Port 4 (SPKR_R)
+		 * WSA8835 Port 2 (COMP)    <=> SWR0 Port 5 (SPKR_R_COMP)
+		 * WSA8835 Port 3 (BOOST)   <=> SWR0 Port 6 (SPKR_R_BOOST)
+		 * WSA8835 Port 4 (VISENSE) <=> SWR0 Port 11 (SPKR_R_VI)
+		 */
+		qcom,port-mapping = <4 5 6 11>;
 	};
 };
 
@@ -1021,6 +1141,14 @@
 };
 
 &tlmm {
+	bt_default: bt-default-state {
+		sw-ctrl-pins {
+			pins = "gpio18";
+			function = "gpio";
+			bias-pull-down;
+		};
+	};
+
 	wcd_default: wcd-reset-n-active-state {
 		pins = "gpio101";
 		function = "gpio";
@@ -1028,6 +1156,31 @@
 		bias-disable;
 		output-low;
 	};
+
+	wlan_en: wlan-en-state {
+		pins = "gpio16";
+		function = "gpio";
+		drive-strength = <8>;
+		bias-pull-down;
+	};
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+
+		max-speed = <3200000>;
+	};
 };
 
 &ufs_mem_phy {
diff --git a/arch/arm64/boot/dts/qcom/sm8750.dtsi b/arch/arm64/boot/dts/qcom/sm8750.dtsi
index 4643705021c6..a82d9867c7cb 100644
--- a/arch/arm64/boot/dts/qcom/sm8750.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8750.dtsi
@@ -631,7 +631,7 @@
 			clocks = <&bi_tcxo_div2>,
 				 <0>,
 				 <&sleep_clk>,
-				 <0>,
+				 <&pcie0_phy>,
 				 <0>,
 				 <0>,
 				 <0>,
@@ -3304,6 +3304,184 @@
 			};
 		};
 
+		pcie0: pcie@1c00000 {
+			device_type = "pci";
+			compatible = "qcom,pcie-sm8750", "qcom,pcie-sm8550";
+			reg = <0x0 0x01c00000 0x0 0x3000>,
+			      <0x0 0x40000000 0x0 0xf1d>,
+			      <0x0 0x40000f20 0x0 0xa8>,
+			      <0x0 0x40001000 0x0 0x1000>,
+			      <0x0 0x40100000 0x0 0x100000>,
+			      <0x0 0x01C03000 0x0 0x1000>;
+			reg-names = "parf",
+				    "dbi",
+				    "elbi",
+				    "atu",
+				    "config",
+				    "mhi";
+
+			#address-cells = <3>;
+			#size-cells = <2>;
+			ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
+				 <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x23d00000>,
+				 <0x03000000 0x4 0x00000000 0x4 0x00000000 0x3 0x00000000>;
+			bus-range = <0x00 0xff>;
+
+			dma-coherent;
+
+			linux,pci-domain = <0>;
+
+			msi-map = <0x0 &gic_its 0x1400 0x1>,
+				  <0x100 &gic_its 0x1401 0x1>;
+			msi-map-mask = <0xff00>;
+
+			num-lanes = <2>;
+
+			interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "msi0",
+					  "msi1",
+					  "msi2",
+					  "msi3",
+					  "msi4",
+					  "msi5",
+					  "msi6",
+					  "msi7",
+					  "global";
+
+			#interrupt-cells = <1>;
+			interrupt-map-mask = <0 0 0 0x7>;
+			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>;
+
+			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
+				 <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
+				 <&gcc GCC_DDRSS_PCIE_SF_QTB_CLK>,
+				 <&gcc GCC_AGGRE_NOC_PCIE_AXI_CLK>,
+				 <&gcc GCC_CNOC_PCIE_SF_AXI_CLK>;
+			clock-names = "aux",
+				      "cfg",
+				      "bus_master",
+				      "bus_slave",
+				      "slave_q2a",
+				      "ddrss_sf_tbu",
+				      "noc_aggr",
+				      "cnoc_sf_axi";
+
+			interconnects = <&pcie_noc MASTER_PCIE_0 QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>,
+					<&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ALWAYS
+					 &cnoc_main SLAVE_PCIE_0 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "pcie-mem",
+					     "cpu-pcie";
+
+			iommu-map = <0x0   &apps_smmu 0x1400 0x1>,
+				    <0x100 &apps_smmu 0x1401 0x1>;
+
+			resets = <&gcc GCC_PCIE_0_BCR>;
+			reset-names = "pci";
+
+			power-domains = <&gcc GCC_PCIE_0_GDSC>;
+
+			operating-points-v2 = <&pcie0_opp_table>;
+
+			status = "disabled";
+
+			pcie0_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				/* GEN 1 x1 */
+				opp-2500000 {
+					opp-hz = /bits/ 64 <2500000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <250000 1>;
+				};
+
+				/* GEN 1 x2 and GEN 2 x1 */
+				opp-5000000 {
+					opp-hz = /bits/ 64 <5000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <500000 1>;
+				};
+
+				/* GEN 2 x2 */
+				opp-10000000 {
+					opp-hz = /bits/ 64 <10000000>;
+					required-opps = <&rpmhpd_opp_low_svs>;
+					opp-peak-kBps = <1000000 1>;
+				};
+
+				/* GEN 3 x1 */
+				opp-8000000 {
+					opp-hz = /bits/ 64 <8000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <984500 1>;
+				};
+
+				/* GEN 3 x2 */
+				opp-16000000 {
+					opp-hz = /bits/ 64 <16000000>;
+					required-opps = <&rpmhpd_opp_nom>;
+					opp-peak-kBps = <1969000 1>;
+				};
+
+			};
+
+			pcieport0: pcie@0 {
+				device_type = "pci";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+				phys = <&pcie0_phy>;
+			};
+		};
+
+		pcie0_phy: phy@1c06000 {
+			compatible = "qcom,sm8750-qmp-gen3x2-pcie-phy";
+			reg = <0 0x01c06000 0 0x2000>;
+
+			clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
+				 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+				 <&tcsrcc TCSR_PCIE_0_CLKREF_EN>,
+				 <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>,
+				 <&gcc GCC_PCIE_0_PIPE_CLK>;
+			clock-names = "aux",
+				      "cfg_ahb",
+				      "ref",
+				      "rchng",
+				      "pipe";
+
+			assigned-clocks = <&gcc GCC_PCIE_0_PHY_RCHNG_CLK>;
+			assigned-clock-rates = <100000000>;
+
+			resets = <&gcc GCC_PCIE_0_PHY_BCR>;
+			reset-names = "phy";
+
+			power-domains = <&gcc GCC_PCIE_0_PHY_GDSC>;
+
+			#clock-cells = <0>;
+			clock-output-names = "pcie0_pipe_clk";
+
+			#phy-cells = <0>;
+
+			status = "disabled";
+		};
+
 		ufs_mem_phy: phy@1d80000 {
 			compatible = "qcom,sm8750-qmp-ufs-phy";
 			reg = <0x0 0x01d80000 0x0 0x2000>;
@@ -3617,6 +3795,82 @@
 			};
 		};
 
+		/* cluster0 */
+		pmu@240b3400 {
+			compatible = "qcom,sm8750-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0x0 0x240b3400 0x0 0x600>;
+
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+
+			nonposted-mmio;
+
+			cpu_bwmon_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-0 {
+					opp-peak-kBps = <800000>;
+				};
+
+				opp-1 {
+					opp-peak-kBps = <2188000>;
+				};
+
+				opp-2 {
+					opp-peak-kBps = <5414400>;
+				};
+
+				opp-3 {
+					opp-peak-kBps = <6220800>;
+				};
+
+				opp-4 {
+					opp-peak-kBps = <6835200>;
+				};
+
+				opp-5 {
+					opp-peak-kBps = <8371200>;
+				};
+
+				opp-6 {
+					opp-peak-kBps = <10944000>;
+				};
+
+				opp-7 {
+					opp-peak-kBps = <12748800>;
+				};
+
+				opp-8 {
+					opp-peak-kBps = <14745600>;
+				};
+
+				opp-9 {
+					opp-peak-kBps = <16896000>;
+				};
+
+				opp-10 {
+					opp-peak-kBps = <19046400>;
+				};
+			};
+		};
+
+		/* cluster1 */
+		pmu@240b7400 {
+			compatible = "qcom,sm8750-cpu-bwmon", "qcom,sdm845-bwmon";
+			reg = <0x0 0x240b7400 0x0 0x600>;
+
+			interrupts = <GIC_SPI 581 IRQ_TYPE_LEVEL_HIGH>;
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ACTIVE_ONLY>;
+
+			operating-points-v2 = <&cpu_bwmon_opp_table>;
+		};
+
 		gem_noc: interconnect@24100000 {
 			compatible = "qcom,sm8750-gem-noc";
 			reg = <0x0 0x24100000 0x0 0x14b080>;
diff --git a/arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi b/arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi
index c771fd1d8029..ee3c8c5e2c50 100644
--- a/arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1-asus-zenbook-a14.dtsi
@@ -985,7 +985,6 @@
 };
 
 &mdss_dp0_out {
-	data-lanes = <0 1>;
 	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 };
 
@@ -994,13 +993,15 @@
 };
 
 &mdss_dp1_out {
-	data-lanes = <0 1>;
 	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 };
 
 &mdss_dp3 {
 	/delete-property/ #sound-dai-cells;
 
+	pinctrl-0 = <&edp0_hpd_default>;
+	pinctrl-names = "default";
+
 	status = "okay";
 
 	aux-bus {
@@ -1019,19 +1020,13 @@
 			};
 		};
 	};
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-
-			mdss_dp3_out: endpoint {
-				data-lanes = <0 1 2 3>;
-				link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+&mdss_dp3_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 
-				remote-endpoint = <&edp_panel_in>;
-			};
-		};
-	};
+	remote-endpoint = <&edp_panel_in>;
 };
 
 &mdss_dp3_phy {
diff --git a/arch/arm64/boot/dts/qcom/x1-crd.dtsi b/arch/arm64/boot/dts/qcom/x1-crd.dtsi
index c9f0d5052670..3c9455fede5c 100644
--- a/arch/arm64/boot/dts/qcom/x1-crd.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1-crd.dtsi
@@ -1016,6 +1016,27 @@
 	};
 };
 
+&i2c5 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	eusb6_repeater: redriver@4f {
+		compatible = "nxp,ptn3222";
+		reg = <0x4f>;
+
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+
+		reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb6_reset_n>;
+		pinctrl-names = "default";
+
+		#phy-cells = <0>;
+	};
+};
+
 &i2c7 {
 	clock-frequency = <400000>;
 
@@ -1128,7 +1149,7 @@
 };
 
 &mdss_dp0_out {
-	data-lanes = <0 1>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 };
 
 &mdss_dp1 {
@@ -1136,7 +1157,7 @@
 };
 
 &mdss_dp1_out {
-	data-lanes = <0 1>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 };
 
 &mdss_dp2 {
@@ -1144,12 +1165,15 @@
 };
 
 &mdss_dp2_out {
-	data-lanes = <0 1>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 };
 
 &mdss_dp3 {
 	/delete-property/ #sound-dai-cells;
 
+	pinctrl-0 = <&edp0_hpd_default>;
+	pinctrl-names = "default";
+
 	status = "okay";
 
 	aux-bus {
@@ -1168,18 +1192,13 @@
 			};
 		};
 	};
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-			mdss_dp3_out: endpoint {
-				data-lanes = <0 1 2 3>;
-				link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+&mdss_dp3_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 
-				remote-endpoint = <&edp_panel_in>;
-			};
-		};
-	};
+	remote-endpoint = <&edp_panel_in>;
 };
 
 &mdss_dp3_phy {
@@ -1466,6 +1485,14 @@
 		bias-disable;
 	};
 
+	eusb6_reset_n: eusb6-reset-n-state {
+		pins = "gpio184";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
 	hall_int_n_default: hall-int-n-state {
 		pins = "gpio92";
 		function = "gpio";
@@ -1747,3 +1774,38 @@
 &usb_1_ss2_qmpphy_out {
 	remote-endpoint = <&retimer_ss2_ss_in>;
 };
+
+&usb_mp {
+	/* Only second port is used with USB 2.0 maximum speed */
+	status = "okay";
+};
+
+&usb_mp_hsphy0 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_mp_hsphy1 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb6_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi b/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi
new file mode 100644
index 000000000000..cc64558ed5e6
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1-dell-thena.dtsi
@@ -0,0 +1,1666 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2024 Aleksandrs Vinarskis <alex.vinarskis@gmail.com>
+ * Copyright (c) 2025 Bryan O'Donoghue <bryan.odonoghue@linaro.org>
+ * Copyright (c) 2025 Val Packett <val@packett.cool>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "x1e80100-pmics.dtsi"
+
+/ {
+	chassis-type = "laptop";
+
+	aliases {
+		serial0 = &uart14;
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9385-codec";
+
+		pinctrl-0 = <&wcd_default>;
+		pinctrl-names = "default";
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <40000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_l15b_1p8>;
+		vdd-rxtx-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&hall_int_n_default>;
+		pinctrl-names = "default";
+
+		switch-lid {
+			gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,x1e80100-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 123 GPIO_ACTIVE_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Display-adjacent port */
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss0_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss0_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss0_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss0_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss0_con_sbu_out>;
+					};
+				};
+			};
+		};
+
+		/* User-adjacent port */
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss1_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss1_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss1_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss1_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss1_con_sbu_out>;
+					};
+				};
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		pinctrl-0 = <&cam_indicator_en>;
+		pinctrl-names = "default";
+
+		led-camera-indicator {
+			label = "white:camera-indicator";
+			function = LED_FUNCTION_INDICATOR;
+			color = <LED_COLOR_ID_WHITE>;
+			gpios = <&tlmm 110 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "none";
+			default-state = "off";
+			/* Reuse as a panic indicator until we get a "camera on" trigger */
+			panic-indicator;
+		};
+	};
+
+	reserved-memory {
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	sound: sound {
+		compatible = "qcom,x1e80100-sndcard";
+		audio-routing = "WooferLeft IN", "WSA WSA_SPK1 OUT",
+				"TweeterLeft IN", "WSA WSA_SPK2 OUT",
+				"WooferRight IN", "WSA2 WSA_SPK1 OUT",
+				"TweeterRight IN", "WSA2 WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC2", "MIC BIAS2",
+				"VA DMIC0", "MIC BIAS1",
+				"VA DMIC1", "MIC BIAS1",
+				"VA DMIC0", "VA MIC BIAS1",
+				"VA DMIC1", "VA MIC BIAS1",
+				"TX SWR_INPUT1", "ADC2_OUTPUT";
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			codec {
+				sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			codec {
+				sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			codec {
+				sound-dai = <&left_woofer>, <&left_tweeter>,
+					    <&swr0 0>, <&lpass_wsamacro 0>,
+					    <&right_woofer>, <&right_tweeter>,
+					    <&swr3 0>, <&lpass_wsa2macro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		va-dai-link {
+			link-name = "VA Capture";
+
+			codec {
+				sound-dai = <&lpass_vamacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	vreg_cam_1p8: regulator-cam-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_CAM_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 91 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&cam_ldo_en>;
+		pinctrl-names = "default";
+	};
+
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_NVME_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&nvme_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p15: regulator-rtmr1-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&tlmm 188 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_1p8: regulator-rtmr1-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&tlmm 175 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr1_3p3: regulator-rtmr1-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR1_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 186 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb1_pwr_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vreg_wcn_3p3: regulator-wcn-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wcn_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_wcn_0p95: regulator-wcn-0p95 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_0P95";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <950000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_1p9: regulator-wcn-1p9 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_1P9";
+		regulator-min-microvolt = <1900000>;
+		regulator-max-microvolt = <1900000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	wcn7850-pmu {
+		compatible = "qcom,wcn7850-pmu";
+
+		vdd-supply = <&vreg_wcn_0p95>;
+		vddio-supply = <&vreg_l15b_1p8>;
+		vddaon-supply = <&vreg_wcn_0p95>;
+		vdddig-supply = <&vreg_wcn_0p95>;
+		vddrfa1p2-supply = <&vreg_wcn_1p9>;
+		vddrfa1p8-supply = <&vreg_wcn_1p9>;
+
+		wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&wcn_wlan_bt_en>;
+		pinctrl-names = "default";
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob2>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l12-supply = <&vreg_s5j_1p2>;
+		vdd-l15-supply = <&vreg_s4c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p8: ldo7 {
+			regulator-name = "vreg_l7b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_3p0: ldo8 {
+			regulator-name = "vreg_l8b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p2: ldo12 {
+			regulator-name = "vreg_l12b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p0: ldo14 {
+			regulator-name = "vreg_l14b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s4c_1p8: smps4 {
+			regulator-name = "vreg_s4c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_0p8: ldo2 {
+			regulator-name = "vreg_l2c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s4c_1p8>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_l1d_0p8: ldo1 {
+			regulator-name = "vreg_l1d_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p9: ldo2 {
+			regulator-name = "vreg_l2d_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_1p8: ldo3 {
+			regulator-name = "vreg_l3d_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_s1f_0p7: smps1 {
+			regulator-name = "vreg_s1f_0p7";
+			regulator-min-microvolt = <700000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "i";
+
+		vdd-l1-supply = <&vreg_s4c_1p8>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+
+		vreg_l1i_1p8: ldo1 {
+			regulator-name = "vreg_l1i_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_1p2: ldo2 {
+			regulator-name = "vreg_l2i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_0p8: ldo3 {
+			regulator-name = "vreg_l3i_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "j";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s5j_1p2: smps5 {
+			regulator-name = "vreg_s5j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p8: ldo1 {
+			regulator-name = "vreg_l1j_0p8";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3j_0p8: ldo3 {
+			regulator-name = "vreg_l3j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	keyboard@5 {
+		compatible = "hid-over-i2c";
+		reg = <0x5>;
+
+		hid-descr-addr = <0x20>;
+		interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&kybd_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+
+	touchpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+
+		hid-descr-addr = <0x20>;
+		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&tpad_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8833", "parade,ps8830";
+		reg = <0x8>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK3>;
+
+		vdd-supply = <&vreg_rtmr0_1p15>;
+		vdd33-supply = <&vreg_rtmr0_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr0_3p3>;
+		vddar-supply = <&vreg_rtmr0_1p15>;
+		vddat-supply = <&vreg_rtmr0_1p15>;
+		vddio-supply = <&vreg_rtmr0_1p8>;
+
+		reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr0_default>;
+		pinctrl-names = "default";
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss0_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss0_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss0_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	/* EC @0x3b */
+
+	/* Type A Port */
+	eusb3_typea_repeater: redriver@43 {
+		compatible = "nxp,ptn3222";
+		reg = <0x43>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb3_reset_n>;
+		pinctrl-names = "default";
+	};
+
+	/* Fingerprint scanner */
+	eusb5_frp_repeater: redriver@4f {
+		compatible = "nxp,ptn3222";
+		reg = <0x4f>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb5_reset_n>;
+		pinctrl-names = "default";
+	};
+};
+
+&i2c7 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8833", "parade,ps8830";
+		reg = <0x8>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK4>;
+
+		vdd-supply = <&vreg_rtmr1_1p15>;
+		vdd33-supply = <&vreg_rtmr1_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr1_3p3>;
+		vddar-supply = <&vreg_rtmr1_1p15>;
+		vddat-supply = <&vreg_rtmr1_1p15>;
+		vddio-supply = <&vreg_rtmr1_1p8>;
+
+		reset-gpios = <&tlmm 176 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr1_default>;
+		pinctrl-names = "default";
+
+		retimer-switch;
+		orientation-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss1_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss1_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss1_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss1_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c8 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+};
+
+&i2c20 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+};
+
+&lpass_tlmm {
+	spkr_01_sd_n_active: spkr-01-sd-n-active-state {
+		pins = "gpio12";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	spkr_23_sd_n_active: spkr-23-sd-n-active-state {
+		pins = "gpio13";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&lpass_vamacro {
+	pinctrl-0 = <&dmic01_default>;
+	pinctrl-names = "default";
+
+	vdd-micb-supply = <&vreg_l1b_1p8>;
+	qcom,dmic-sample-rate = <4800000>;
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	data-lanes = <0 1>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp1 {
+	status = "okay";
+};
+
+&mdss_dp1_out {
+	data-lanes = <0 1>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp3 {
+	/delete-property/ #sound-dai-cells;
+
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "edp-panel";
+			enable-gpios = <&tlmm 74 GPIO_ACTIVE_HIGH>;
+			power-supply = <&vreg_edp_3p3>;
+
+			pinctrl-0 = <&edp_bl_en>;
+			pinctrl-names = "default";
+
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss_dp3_out>;
+				};
+			};
+		};
+	};
+
+	ports {
+		port@1 {
+			reg = <1>;
+
+			mdss_dp3_out: endpoint {
+				data-lanes = <0 1 2 3>;
+				link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+				remote-endpoint = <&edp_panel_in>;
+			};
+		};
+	};
+};
+
+&mdss_dp3_phy {
+	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie4_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie4_port0 {
+	wifi@0 {
+		compatible = "pci17cb,1107";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+	};
+};
+
+&pcie6a {
+	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-0 = <&pcie6a_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie6a_phy {
+	vdda-phy-supply = <&vreg_l1d_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pm8550_gpios {
+	rtmr0_default: rtmr0-reset-n-active-state {
+		pins = "gpio10";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+
+	usb0_3p3_reg_en: usb0-3p3-reg-en-state {
+		pins = "gpio11";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pm8550ve_9_gpios {
+	usb0_1p8_reg_en: usb0-1p8-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pmc8380_5_gpios {
+	usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&qupv3_0 {
+	status = "okay";
+};
+
+&qupv3_1 {
+	status = "okay";
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 71 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&sdc2_default &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>;
+	pinctrl-names = "default", "sleep";
+	vmmc-supply = <&vreg_l9b_2p9>;
+	vqmmc-supply = <&vreg_l6b_1p8>;
+	bus-width = <4>;
+	no-sdio;
+	no-mmc;
+
+	status = "okay";
+};
+
+&smb2360_0 {
+	status = "okay";
+};
+
+&smb2360_0_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1 {
+	status = "okay";
+};
+
+&smb2360_1_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&swr0 {
+	status = "okay";
+
+	pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
+	pinctrl-names = "default";
+
+	/* WSA8845, Left Woofer */
+	left_woofer: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "WooferLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Left Tweeter */
+	left_tweeter: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TweeterLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9385 RX */
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9385 TX */
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <2 2 3 4>;
+	};
+};
+
+&swr3 {
+	status = "okay";
+
+	pinctrl-0 = <&wsa2_swr_active>, <&spkr_23_sd_n_active>;
+	pinctrl-names = "default";
+
+	/* WSA8845, Right Woofer */
+	right_woofer: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "WooferRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Right Tweeter */
+	right_tweeter: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		reset-gpios = <&lpass_tlmm 13 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "TweeterRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <44 4>,  /* SPI11 (TPM) */
+			       <76 4>,  /* SPI19 (TZ Protected) */
+			       <238 1>; /* UFS Reset */
+
+	cam_rgb_default: cam-rgb-default-state {
+		mclk-pins {
+			pins = "gpio100";
+			function = "cam_aon";
+			drive-strength = <16>;
+			bias-disable;
+		};
+
+		reset-n-pins {
+			pins = "gpio237";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
+
+	cam_indicator_en: cam-indicator-en-state {
+		pins = "gpio110";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	cam_ldo_en: cam-ldo-en-state {
+		pins = "gpio91";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	edp_bl_en: edp-bl-en-state {
+		pins = "gpio74";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio70";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	eusb3_reset_n: eusb3-reset-n-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	eusb5_reset_n: eusb5-reset-n-state {
+		pins = "gpio184";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	hall_int_n_default: hall-int-n-state {
+		pins = "gpio92";
+		function = "gpio";
+
+		bias-disable;
+	};
+
+	kybd_default: kybd-default-state {
+		pins = "gpio67";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio147";
+			function = "pcie4_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio146";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie6a_default: pcie6a-default-state {
+		clkreq-n-pins {
+			pins = "gpio153";
+			function = "pcie6a_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio152";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio154";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	rtmr1_default: rtmr1-reset-n-active-state {
+		pins = "gpio176";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	sdc2_card_det_n: sdc2-card-det-state {
+		pins = "gpio71";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	tpad_default: tpad-default-state {
+		disable-pins {
+			pins = "gpio38";
+			function = "gpio";
+			output-high;
+		};
+
+		int-n-pins {
+			pins = "gpio3";
+			function = "gpio";
+			bias-pull-up;
+		};
+
+		reset-n-pins {
+			pins = "gpio52";
+			function = "gpio";
+			bias-disable;
+		};
+	};
+
+	ts0_default: ts0-default-state {
+		disable-pins {
+			pins = "gpio75";
+			function = "gpio";
+			output-high;
+		};
+
+		int-n-pins {
+			pins = "gpio51";
+			function = "gpio";
+			bias-pull-up;
+		};
+
+		reset-n-pins {
+			/* Technically should be High-Z input */
+			pins = "gpio48";
+			function = "gpio";
+			output-low;
+			drive-strength = <2>;
+		};
+	};
+
+	usb1_pwr_1p15_reg_en: usb1-pwr-1p15-reg-en-state {
+		pins = "gpio188";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb1_pwr_1p8_reg_en: usb1-pwr-1p8-reg-en-state {
+		pins = "gpio175";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	usb1_pwr_3p3_reg_en: usb1-pwr-3p3-reg-en-state {
+		pins = "gpio186";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio191";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	wcn_sw_en: wcn-sw-en-state {
+		pins = "gpio214";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wcn_wlan_bt_en: wcn-wlan-bt-en-state {
+		pins = "gpio116", "gpio117";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+		max-speed = <3200000>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+	};
+};
+
+&usb_1_ss0 {
+	status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_0_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l1j_0p8>;
+
+	status = "okay";
+};
+
+&usb_1_ss0_qmpphy_out {
+	remote-endpoint = <&retimer_ss0_ss_in>;
+};
+
+&usb_1_ss1 {
+	status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_1_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
+	status = "okay";
+};
+
+&usb_1_ss1_qmpphy_out {
+	remote-endpoint = <&retimer_ss1_ss_in>;
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_2_hsphy {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb5_frp_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp {
+	status = "okay";
+};
+
+&usb_mp_hsphy0 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb3_typea_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
+
+&usb_mp_hsphy1 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1-el2.dtso b/arch/arm64/boot/dts/qcom/x1-el2.dtso
index 380441deca65..2d1c9151cf1b 100644
--- a/arch/arm64/boot/dts/qcom/x1-el2.dtso
+++ b/arch/arm64/boot/dts/qcom/x1-el2.dtso
@@ -12,6 +12,11 @@
 	status = "disabled";
 };
 
+&iris {
+	/* TODO: Add video-firmware iommus to start IRIS from EL2 */
+	status = "disabled";
+};
+
 /*
  * When running under Gunyah, this IOMMU is controlled by the firmware,
  * however when we take ownership of it in EL2, we need to configure
diff --git a/arch/arm64/boot/dts/qcom/x1-hp-omnibook-x14.dtsi b/arch/arm64/boot/dts/qcom/x1-hp-omnibook-x14.dtsi
new file mode 100644
index 000000000000..a4075434162a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1-hp-omnibook-x14.dtsi
@@ -0,0 +1,1544 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2024, Xilin Wu <wuxilin123@gmail.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+/ {
+	aliases {
+		serial0 = &uart21;
+		serial1 = &uart14;
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9385-codec";
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&wcd_default>;
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_l15b_1p8>;
+		vdd-rxtx-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pmk8550_pwm 0 5000000>;
+
+		brightness-levels = <0 2048 4096 8192 16384 65535>;
+		num-interpolated-steps = <20>;
+		default-brightness-level = <80>;
+
+		enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
+		power-supply = <&vreg_edp_bl>;
+
+		pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
+		pinctrl-names = "default";
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&hall_int_n_default>;
+		pinctrl-names = "default";
+
+		switch-lid {
+			gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,x1e80100-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 123 GPIO_ACTIVE_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Left-side port, closer to the screen */
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss0_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss0_ss_in: endpoint {
+						remote-endpoint = <&retimer_ss0_ss_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss0_con_sbu_in: endpoint {
+						remote-endpoint = <&retimer_ss0_con_sbu_out>;
+					};
+				};
+			};
+		};
+
+		/* Left-side port, farther from the screen */
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss1_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss1_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss1_sbu: endpoint {
+						remote-endpoint = <&usb_1_ss1_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	reserved-memory {
+		linux,cma {
+			compatible = "shared-dma-pool";
+			size = <0x0 0x8000000>;
+			reusable;
+			linux,cma-default;
+		};
+	};
+
+	sound: sound {
+		compatible = "qcom,x1e80100-sndcard";
+		model = "X1E80100-HP-OMNIBOOK-X14";
+		audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT",
+				"SpkrRight IN", "WSA WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC2", "MIC BIAS2",
+				"VA DMIC0", "MIC BIAS3",
+				"VA DMIC1", "MIC BIAS3",
+				"VA DMIC2", "MIC BIAS1",
+				"VA DMIC3", "MIC BIAS1",
+				"VA DMIC0", "VA MIC BIAS3",
+				"VA DMIC1", "VA MIC BIAS3",
+				"VA DMIC2", "VA MIC BIAS1",
+				"VA DMIC3", "VA MIC BIAS1",
+				"TX SWR_INPUT1", "ADC2_OUTPUT";
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			codec {
+				sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		va-dai-link {
+			link-name = "VA Capture";
+
+			cpu {
+				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+			};
+
+			codec {
+				sound-dai = <&lpass_vamacro 0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_edp_bl: regulator-edp-bl {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VBL9";
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		gpio = <&pmc8380_3_gpios 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&edp_bl_reg_en>;
+
+		regulator-boot-on;
+	};
+
+	vreg_misc_3p3: regulator-misc-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_MISC_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550ve_8_gpios 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-names = "default";
+		pinctrl-0 = <&misc_3p3_reg_en>;
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_NVME_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&nvme_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P15";
+		regulator-min-microvolt = <1150000>;
+		regulator-max-microvolt = <1150000>;
+
+		gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_pwr_1p15_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_1P8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+
+		gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_1p8_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_RTMR0_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&usb0_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vreg_vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vreg_wcn_3p3: regulator-wcn-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wcn_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	/*
+	 * TODO: These two regulators are actually part of the removable M.2
+	 * card and not the CRD mainboard. Need to describe this differently.
+	 * Functionally it works correctly, because all we need to do is to
+	 * turn on the actual 3.3V supply above.
+	 */
+	vreg_wcn_0p95: regulator-wcn-0p95 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_0P95";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <950000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_1p9: regulator-wcn-1p9 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_1P9";
+		regulator-min-microvolt = <1900000>;
+		regulator-max-microvolt = <1900000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	wcn6855-pmu {
+		compatible = "qcom,wcn6855-pmu";
+
+		vddaon-supply = <&vreg_wcn_0p95>;
+		vddio-supply = <&vreg_wcn_1p9>;
+		vddpcie1p3-supply = <&vreg_wcn_1p9>;
+		vddpcie1p9-supply = <&vreg_wcn_1p9>;
+		vddpmu-supply = <&vreg_wcn_0p95>;
+		vddpmumx-supply = <&vreg_wcn_0p95>;
+		vddpmucx-supply = <&vreg_wcn_0p95>;
+		vddrfa0p95-supply = <&vreg_wcn_0p95>;
+		vddrfa1p3-supply = <&vreg_wcn_1p9>;
+		vddrfa1p9-supply = <&vreg_wcn_1p9>;
+
+		wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&wcn_wlan_bt_en>;
+		pinctrl-names = "default";
+
+		regulators {
+			vreg_pmu_rfa_cmn_0p8: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn_0p8";
+			};
+
+			vreg_pmu_aon_0p8: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p8";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p8: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p8";
+			};
+
+			vreg_pmu_btcmx_0p8: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p8";
+			};
+
+			vreg_pmu_pcie_1p8: ldo5 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo6 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_rfa_0p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo8 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p7: ldo9 {
+				regulator-name = "vreg_pmu_rfa_1p7";
+			};
+		};
+	};
+
+	usb-1-ss1-sbu-mux {
+		compatible = "onnn,fsusb42", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 179 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 178 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&usb_1_ss1_sbu_default>;
+		pinctrl-names = "default";
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usb_1_ss1_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_ss1_sbu>;
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vreg_vph_pwr>;
+		vdd-bob2-supply = <&vreg_vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob2>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l12-supply = <&vreg_s5j_1p2>;
+		vdd-l15-supply = <&vreg_s4c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p0: ldo5 {
+			regulator-name = "vreg_l5b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p8: ldo7 {
+			regulator-name = "vreg_l7b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_3p0: ldo8 {
+			regulator-name = "vreg_l8b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_1p8: ldo10 {
+			regulator-name = "vreg_l10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p2: ldo12 {
+			regulator-name = "vreg_l12b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p0: ldo14 {
+			regulator-name = "vreg_l14b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l16b_2p9: ldo16 {
+			regulator-name = "vreg_l16b_2p9";
+			regulator-min-microvolt = <2912000>;
+			regulator-max-microvolt = <2912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s4-supply = <&vreg_vph_pwr>;
+
+		vreg_s4c_1p8: smps4 {
+			regulator-name = "vreg_s4c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_0p8: ldo2 {
+			regulator-name = "vreg_l2c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s4c_1p8>;
+		vdd-s1-supply = <&vreg_vph_pwr>;
+
+		vreg_l1d_0p8: ldo1 {
+			regulator-name = "vreg_l1d_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p9: ldo2 {
+			regulator-name = "vreg_l2d_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_1p8: ldo3 {
+			regulator-name = "vreg_l3d_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+		vdd-s1-supply = <&vreg_vph_pwr>;
+
+		vreg_s1f_0p7: smps1 {
+			regulator-name = "vreg_s1f_0p7";
+			regulator-min-microvolt = <700000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_1p0: ldo1 {
+			regulator-name = "vreg_l1f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_1p0: ldo2 {
+			regulator-name = "vreg_l2f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_1p0: ldo3 {
+			regulator-name = "vreg_l3f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "i";
+
+		vdd-l1-supply = <&vreg_s4c_1p8>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s1-supply = <&vreg_vph_pwr>;
+		vdd-s2-supply = <&vreg_vph_pwr>;
+
+		vreg_s1i_0p9: smps1 {
+			regulator-name = "vreg_s1i_0p9";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2i_1p0: smps2 {
+			regulator-name = "vreg_s2i_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1i_1p8: ldo1 {
+			regulator-name = "vreg_l1i_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2i_1p2: ldo2 {
+			regulator-name = "vreg_l2i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_0p8: ldo3 {
+			regulator-name = "vreg_l3i_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "j";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s5-supply = <&vreg_vph_pwr>;
+
+		vreg_s5j_1p2: smps5 {
+			regulator-name = "vreg_s5j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p8: ldo1 {
+			regulator-name = "vreg_l1j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3j_0p8: ldo3 {
+			regulator-name = "vreg_l3j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&i2c0 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	keyboard@3a {
+		compatible = "hid-over-i2c";
+		reg = <0x3a>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l12b_1p2>;
+
+		pinctrl-0 = <&kybd_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+
+	touchpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l12b_1p2>;
+
+		pinctrl-0 = <&tpad_default>;
+		pinctrl-names = "default";
+
+		wakeup-source;
+	};
+};
+
+&i2c3 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	typec-mux@8 {
+		compatible = "parade,ps8830";
+		reg = <0x08>;
+
+		clocks = <&rpmhcc RPMH_RF_CLK3>;
+
+		vdd-supply = <&vreg_rtmr0_1p15>;
+		vdd33-supply = <&vreg_rtmr0_3p3>;
+		vdd33-cap-supply = <&vreg_rtmr0_3p3>;
+		vddar-supply = <&vreg_rtmr0_1p15>;
+		vddat-supply = <&vreg_rtmr0_1p15>;
+		vddio-supply = <&vreg_rtmr0_1p8>;
+
+		reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&rtmr0_default>;
+		pinctrl-names = "default";
+
+		orientation-switch;
+		retimer-switch;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				retimer_ss0_ss_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_ss_in>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				retimer_ss0_ss_in: endpoint {
+					remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				retimer_ss0_con_sbu_out: endpoint {
+					remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
+				};
+			};
+		};
+	};
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	eusb3_repeater: redriver@47 {
+		compatible = "nxp,ptn3222";
+		reg = <0x47>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb3_reset_n>;
+		pinctrl-names = "default";
+
+	};
+};
+
+&i2c8 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l15b_1p8>;
+
+		pinctrl-0 = <&ts0_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&lpass_tlmm {
+	spkr_01_sd_n_active: spkr-01-sd-n-active-state {
+		pins = "gpio12";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&lpass_vamacro {
+	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
+	pinctrl-names = "default";
+
+	vdd-micb-supply = <&vreg_l1b_1p8>;
+	qcom,dmic-sample-rate = <4800000>;
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp1 {
+	status = "okay";
+};
+
+&mdss_dp1_out {
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp3 {
+	/delete-property/ #sound-dai-cells;
+
+	pinctrl-0 = <&edp0_hpd_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "edp-panel";
+			power-supply = <&vreg_edp_3p3>;
+
+			backlight = <&backlight>;
+
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss_dp3_out>;
+				};
+			};
+		};
+	};
+};
+
+&mdss_dp3_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+	remote-endpoint = <&edp_panel_in>;
+};
+
+&mdss_dp3_phy {
+	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie4_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie4_port0 {
+	wifi@0 {
+		compatible = "pci17cb,1107";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+	};
+};
+
+&pcie6a {
+	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-0 = <&pcie6a_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie6a_phy {
+	vdda-phy-supply = <&vreg_l1d_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pm8550_gpios {
+	rtmr0_default: rtmr0-reset-n-active-state {
+		pins = "gpio10";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+
+	usb0_3p3_reg_en: usb0-3p3-reg-en-state {
+		pins = "gpio11";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pm8550ve_8_gpios {
+	misc_3p3_reg_en: misc-3p3-reg-en-state {
+		pins = "gpio6";
+		function = "normal";
+		bias-disable;
+		drive-push-pull;
+		input-disable;
+		output-enable;
+		power-source = <1>; /* 1.8 V */
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+	};
+};
+
+&pm8550ve_9_gpios {
+	usb0_1p8_reg_en: usb0-1p8-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pmc8380_3_gpios {
+	edp_bl_en: edp-bl-en-state {
+		pins = "gpio4";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		input-disable;
+		output-enable;
+	};
+
+	edp_bl_reg_en: edp-bl-reg-en-state {
+		pins = "gpio10";
+		function = "normal";
+	};
+
+};
+
+&pmc8380_5_gpios {
+	usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
+		pins = "gpio8";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		bias-disable;
+		input-disable;
+		output-enable;
+	};
+};
+
+&pmk8550_gpios {
+	edp_bl_pwm: edp-bl-pwm-state {
+		pins = "gpio5";
+		function = "func3";
+	};
+};
+
+&pmk8550_pwm {
+	status = "okay";
+};
+
+&qupv3_0 {
+	status = "okay";
+};
+
+&qupv3_1 {
+	status = "okay";
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&smb2360_0 {
+	status = "okay";
+};
+
+&smb2360_0_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1 {
+	status = "okay";
+};
+
+&smb2360_1_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&swr0 {
+	pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	/* WSA8845, Left Speaker */
+	left_spkr: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Right Speaker */
+	right_spkr: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9385 RX */
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9385 TX */
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <2 2 3 4>;
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <34 2>, /* Unused */
+			       <44 4>, /* SPI (TPM) */
+			       <72 2>, /* Secure EC I2C connection (?) */
+			       <238 1>; /* UFS Reset */
+
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio70";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	eusb3_reset_n: eusb3-reset-n-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	hall_int_n_default: hall-int-n-state {
+		pins = "gpio92";
+		function = "gpio";
+		bias-disable;
+	};
+
+	kybd_default: kybd-default-state {
+		pins = "gpio67";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio147";
+			function = "pcie4_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio146";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie6a_default: pcie6a-default-state {
+		clkreq-n-pins {
+			pins = "gpio153";
+			function = "pcie6a_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio152";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio154";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	tpad_default: tpad-default-state {
+		pins = "gpio3";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	ts0_default: ts0-default-state {
+		int-n-pins {
+			pins = "gpio51";
+			function = "gpio";
+			bias-pull-up;
+		};
+
+		reset-n-pins {
+			pins = "gpio48";
+			function = "gpio";
+			output-high;
+			drive-strength = <16>;
+		};
+	};
+
+	usb_1_ss1_sbu_default: usb-1-ss1-sbu-state {
+		mode-pins {
+			pins = "gpio177";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+			output-high;
+		};
+
+		oe-n-pins {
+			pins = "gpio179";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+		};
+
+		sel-pins {
+			pins = "gpio178";
+			function = "gpio";
+			bias-disable;
+			drive-strength = <2>;
+		};
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio191";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	wcn_sw_en: wcn-sw-en-state {
+		pins = "gpio214";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wcn_wlan_bt_en: wcn-wlan-bt-en-state {
+		pins = "gpio116", "gpio117";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn6855-bt";
+		max-speed = <3200000>;
+
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
+		vddaon-supply = <&vreg_pmu_aon_0p8>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
+		vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
+	};
+};
+
+&usb_1_ss0_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_0_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l1j_0p8>;
+
+	status = "okay";
+};
+
+&usb_1_ss0 {
+	status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_qmpphy_out {
+	remote-endpoint = <&retimer_ss0_ss_in>;
+};
+
+&usb_1_ss1_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_1_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
+	status = "okay";
+};
+
+&usb_1_ss1 {
+	status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss1_ss_in>;
+};
+
+&usb_mp {
+	status = "okay";
+};
+
+&usb_mp_dwc3 {
+	phys = <&usb_mp_hsphy0>, <&usb_mp_qmpphy0>;
+	phy-names = "usb2-0", "usb3-0";
+};
+
+&usb_mp_hsphy0 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb3_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts b/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts
index 2d9627e6c798..bfc649d4b643 100644
--- a/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts
+++ b/arch/arm64/boot/dts/qcom/x1e001de-devkit.dts
@@ -983,7 +983,6 @@
 };
 
 &mdss_dp0_out {
-	data-lanes = <0 1>;
 	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 };
 
@@ -992,7 +991,6 @@
 };
 
 &mdss_dp1_out {
-	data-lanes = <0 1>;
 	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 };
 
@@ -1001,7 +999,6 @@
 };
 
 &mdss_dp2_out {
-	data-lanes = <0 1>;
 	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 };
 
@@ -1474,7 +1471,7 @@
 	vdd-supply = <&vreg_l2e_0p8>;
 	vdda12-supply = <&vreg_l3e_1p2>;
 
-	phys = <&eusb6_repeater>;
+	phys = <&eusb3_repeater>;
 
 	status = "okay";
 };
@@ -1483,7 +1480,7 @@
 	vdd-supply = <&vreg_l2e_0p8>;
 	vdda12-supply = <&vreg_l3e_1p2>;
 
-	phys = <&eusb3_repeater>;
+	phys = <&eusb6_repeater>;
 
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s-oled.dts b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s-oled.dts
index be65fafafa73..d524afa12d19 100644
--- a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s-oled.dts
+++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s-oled.dts
@@ -10,3 +10,11 @@
 	compatible = "lenovo,thinkpad-t14s-oled", "lenovo,thinkpad-t14s",
 		     "qcom,x1e78100", "qcom,x1e80100";
 };
+
+&panel {
+	compatible = "samsung,atna40yk20", "samsung,atna33xc20";
+	enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
+
+	pinctrl-0 = <&edp_bl_en>;
+	pinctrl-names = "default";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi
index ac1dddf27da3..0a989e9d3d23 100644
--- a/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e78100-lenovo-thinkpad-t14s.dtsi
@@ -967,6 +967,11 @@
 	/* TODO: second-sourced touchscreen @ 0x41 */
 };
 
+&iris {
+	firmware-name = "qcom/x1e80100/LENOVO/21N1/qcvss8380.mbn";
+	status = "okay";
+};
+
 &lpass_tlmm {
 	spkr_01_sd_n_active: spkr-01-sd-n-active-state {
 		pins = "gpio12";
@@ -994,7 +999,7 @@
 };
 
 &mdss_dp0_out {
-	data-lanes = <0 1>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 };
 
 &mdss_dp1 {
@@ -1002,12 +1007,15 @@
 };
 
 &mdss_dp1_out {
-	data-lanes = <0 1>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 };
 
 &mdss_dp3 {
 	/delete-property/ #sound-dai-cells;
 
+	pinctrl-0 = <&edp0_hpd_default>;
+	pinctrl-names = "default";
+
 	status = "okay";
 
 	aux-bus {
@@ -1022,19 +1030,13 @@
 			};
 		};
 	};
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-
-			mdss_dp3_out: endpoint {
-				data-lanes = <0 1 2 3>;
-				link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+&mdss_dp3_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 
-				remote-endpoint = <&edp_panel_in>;
-			};
-		};
-	};
+	remote-endpoint = <&edp_panel_in>;
 };
 
 &mdss_dp3_phy {
@@ -1547,7 +1549,7 @@
 	vdd-supply = <&vreg_l2e_0p8>;
 	vdda12-supply = <&vreg_l3e_1p2>;
 
-	phys = <&eusb6_repeater>;
+	phys = <&eusb3_repeater>;
 
 	status = "okay";
 };
@@ -1556,7 +1558,7 @@
 	vdd-supply = <&vreg_l2e_0p8>;
 	vdda12-supply = <&vreg_l3e_1p2>;
 
-	phys = <&eusb3_repeater>;
+	phys = <&eusb6_repeater>;
 
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
index 71b2cc6c392f..0113d856b3ad 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-asus-vivobook-s15.dts
@@ -593,6 +593,9 @@
 &mdss_dp3 {
 	/delete-property/ #sound-dai-cells;
 
+	pinctrl-0 = <&edp0_hpd_default>;
+	pinctrl-names = "default";
+
 	status = "okay";
 
 	aux-bus {
@@ -611,19 +614,13 @@
 			};
 		};
 	};
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-
-			mdss_dp3_out: endpoint {
-				data-lanes = <0 1 2 3>;
-				link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+&mdss_dp3_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 
-				remote-endpoint = <&edp_panel_in>;
-			};
-		};
-	};
+	remote-endpoint = <&edp_panel_in>;
 };
 
 &mdss_dp3_phy {
@@ -977,7 +974,7 @@
 	vdd-supply = <&vreg_l2e_0p8>;
 	vdda12-supply = <&vreg_l3e_1p2>;
 
-	phys = <&eusb6_repeater>;
+	phys = <&eusb3_repeater>;
 
 	status = "okay";
 };
@@ -986,7 +983,7 @@
 	vdd-supply = <&vreg_l2e_0p8>;
 	vdda12-supply = <&vreg_l3e_1p2>;
 
-	phys = <&eusb3_repeater>;
+	phys = <&eusb6_repeater>;
 
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
index 976b8e44b576..dfc378e1a056 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-crd.dts
@@ -16,3 +16,7 @@
 &gpu_zap_shader {
 	firmware-name = "qcom/x1e80100/gen70500_zap.mbn";
 };
+
+&iris {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-dell-inspiron-14-plus-7441.dts b/arch/arm64/boot/dts/qcom/x1e80100-dell-inspiron-14-plus-7441.dts
new file mode 100644
index 000000000000..cf2a7c262888
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e80100-dell-inspiron-14-plus-7441.dts
@@ -0,0 +1,57 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025 Val Packett <val@packett.cool>
+ */
+/dts-v1/;
+
+#include "x1e80100.dtsi"
+#include "x1-dell-thena.dtsi"
+
+/ {
+	model = "Dell Inspiron 14 Plus 7441";
+	compatible = "dell,inspiron-14-plus-7441", "qcom,x1e80100";
+};
+
+&sound {
+	model = "X1E80100-Dell-Inspiron-14p-7441";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/x1e80100/dell/inspiron-14-plus-7441/qcdxkmsuc8380.mbn";
+};
+
+&i2c8 {
+	touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&ts0_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&iris {
+	firmware-name = "qcom/x1e80100/dell/inspiron-14-plus-7441/qcvss8380.mbn";
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/x1e80100/dell/inspiron-14-plus-7441/qcadsp8380.mbn",
+			"qcom/x1e80100/dell/inspiron-14-plus-7441/adsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/x1e80100/dell/inspiron-14-plus-7441/qccdsp8380.mbn",
+			"qcom/x1e80100/dell/inspiron-14-plus-7441/cdsp_dtbs.elf";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-dell-latitude-7455.dts b/arch/arm64/boot/dts/qcom/x1e80100-dell-latitude-7455.dts
new file mode 100644
index 000000000000..32ad9679550e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1e80100-dell-latitude-7455.dts
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025 Val Packett <val@packett.cool>
+ */
+/dts-v1/;
+
+#include "x1e80100.dtsi"
+#include "x1-dell-thena.dtsi"
+
+/ {
+	model = "Dell Latitude 7455";
+	compatible = "dell,latitude-7455", "qcom,x1e80100";
+};
+
+&sound {
+	model = "X1E80100-Dell-Latitude-7455";
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/x1e80100/dell/latitude-7455/qcdxkmsuc8380.mbn";
+};
+
+&i2c8 {
+	/* LXST2021 */
+	touchscreen@9 {
+		compatible = "hid-over-i2c";
+		reg = <0x09>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&ts0_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&iris {
+	firmware-name = "qcom/x1e80100/dell/latitude-7455/qcvss8380.mbn";
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/x1e80100/dell/latitude-7455/qcadsp8380.mbn",
+			"qcom/x1e80100/dell/latitude-7455/adsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/x1e80100/dell/latitude-7455/qccdsp8380.mbn",
+			"qcom/x1e80100/dell/latitude-7455/cdsp_dtbs.elf";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts b/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts
index fd00d1bf12e1..58f8caaa7258 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-dell-xps13-9345.dts
@@ -875,6 +875,11 @@
 	};
 };
 
+&iris {
+	firmware-name = "qcom/x1e80100/dell/xps13-9345/qcvss8380.mbn";
+	status = "okay";
+};
+
 &mdss {
 	status = "okay";
 };
@@ -884,7 +889,6 @@
 };
 
 &mdss_dp0_out {
-	data-lanes = <0 1>;
 	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 };
 
@@ -893,13 +897,15 @@
 };
 
 &mdss_dp1_out {
-	data-lanes = <0 1>;
 	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 };
 
 &mdss_dp3 {
 	/delete-property/ #sound-dai-cells;
 
+	pinctrl-0 = <&edp0_hpd_default>;
+	pinctrl-names = "default";
+
 	status = "okay";
 
 	aux-bus {
@@ -918,19 +924,13 @@
 			};
 		};
 	};
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-
-			mdss_dp3_out: endpoint {
-				data-lanes = <0 1 2 3>;
-				link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+&mdss_dp3_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 
-				remote-endpoint = <&edp_panel_in>;
-			};
-		};
-	};
+	remote-endpoint = <&edp_panel_in>;
 };
 
 &mdss_dp3_phy {
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
index 8d2a9b7f4730..e5a839d45840 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-hp-omnibook-x14.dts
@@ -6,1227 +6,18 @@
 
 /dts-v1/;
 
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/gpio-keys.h>
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
-#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
-
 #include "x1e80100.dtsi"
 #include "x1e80100-pmics.dtsi"
+#include "x1-hp-omnibook-x14.dtsi"
 
 / {
-	model = "HP Omnibook X 14";
+	model = "HP Omnibook X 14-fe0";
 	compatible = "hp,omnibook-x14", "qcom,x1e80100";
 	chassis-type = "laptop";
-
-	aliases {
-		serial0 = &uart21;
-		serial1 = &uart14;
-	};
-
-	wcd938x: audio-codec {
-		compatible = "qcom,wcd9385-codec";
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&wcd_default>;
-
-		qcom,micbias1-microvolt = <1800000>;
-		qcom,micbias2-microvolt = <1800000>;
-		qcom,micbias3-microvolt = <1800000>;
-		qcom,micbias4-microvolt = <1800000>;
-		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
-		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
-		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
-		qcom,rx-device = <&wcd_rx>;
-		qcom,tx-device = <&wcd_tx>;
-
-		reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
-
-		vdd-buck-supply = <&vreg_l15b_1p8>;
-		vdd-rxtx-supply = <&vreg_l15b_1p8>;
-		vdd-io-supply = <&vreg_l15b_1p8>;
-		vdd-mic-bias-supply = <&vreg_bob1>;
-
-		#sound-dai-cells = <1>;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&pmk8550_pwm 0 5000000>;
-
-		brightness-levels = <0 2048 4096 8192 16384 65535>;
-		num-interpolated-steps = <20>;
-		default-brightness-level = <80>;
-
-		enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
-		power-supply = <&vreg_edp_bl>;
-
-		pinctrl-0 = <&edp_bl_en>, <&edp_bl_pwm>;
-		pinctrl-names = "default";
-	};
-
-	gpio-keys {
-		compatible = "gpio-keys";
-
-		pinctrl-0 = <&hall_int_n_default>;
-		pinctrl-names = "default";
-
-		switch-lid {
-			gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
-			linux,input-type = <EV_SW>;
-			linux,code = <SW_LID>;
-			wakeup-source;
-			wakeup-event-action = <EV_ACT_DEASSERTED>;
-		};
-	};
-
-	pmic-glink {
-		compatible = "qcom,x1e80100-pmic-glink",
-			     "qcom,sm8550-pmic-glink",
-			     "qcom,pmic-glink";
-		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
-				    <&tlmm 123 GPIO_ACTIVE_HIGH>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		/* Left-side port, closer to the screen */
-		connector@0 {
-			compatible = "usb-c-connector";
-			reg = <0>;
-			power-role = "dual";
-			data-role = "dual";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-
-					pmic_glink_ss0_hs_in: endpoint {
-						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-
-					pmic_glink_ss0_ss_in: endpoint {
-						remote-endpoint = <&retimer_ss0_ss_out>;
-					};
-				};
-
-				port@2 {
-					reg = <2>;
-
-					pmic_glink_ss0_con_sbu_in: endpoint {
-						remote-endpoint = <&retimer_ss0_con_sbu_out>;
-					};
-				};
-			};
-		};
-
-		/* Left-side port, farther from the screen */
-		connector@1 {
-			compatible = "usb-c-connector";
-			reg = <1>;
-			power-role = "dual";
-			data-role = "dual";
-
-			ports {
-				#address-cells = <1>;
-				#size-cells = <0>;
-
-				port@0 {
-					reg = <0>;
-
-					pmic_glink_ss1_hs_in: endpoint {
-						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
-					};
-				};
-
-				port@1 {
-					reg = <1>;
-
-					pmic_glink_ss1_ss_in: endpoint {
-						remote-endpoint = <&usb_1_ss1_qmpphy_out>;
-					};
-				};
-
-				port@2 {
-					reg = <2>;
-
-					pmic_glink_ss1_sbu: endpoint {
-						remote-endpoint = <&usb_1_ss1_sbu_mux>;
-					};
-				};
-			};
-		};
-	};
-
-	reserved-memory {
-		linux,cma {
-			compatible = "shared-dma-pool";
-			size = <0x0 0x8000000>;
-			reusable;
-			linux,cma-default;
-		};
-	};
-
-	sound: sound {
-		compatible = "qcom,x1e80100-sndcard";
-		model = "X1E80100-HP-OMNIBOOK-X14";
-		audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT",
-				"SpkrRight IN", "WSA WSA_SPK2 OUT",
-				"IN1_HPHL", "HPHL_OUT",
-				"IN2_HPHR", "HPHR_OUT",
-				"AMIC2", "MIC BIAS2",
-				"VA DMIC0", "MIC BIAS3",
-				"VA DMIC1", "MIC BIAS3",
-				"VA DMIC2", "MIC BIAS1",
-				"VA DMIC3", "MIC BIAS1",
-				"VA DMIC0", "VA MIC BIAS3",
-				"VA DMIC1", "VA MIC BIAS3",
-				"VA DMIC2", "VA MIC BIAS1",
-				"VA DMIC3", "VA MIC BIAS1",
-				"TX SWR_INPUT1", "ADC2_OUTPUT";
-
-		wcd-playback-dai-link {
-			link-name = "WCD Playback";
-
-			cpu {
-				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
-			};
-
-			codec {
-				sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
-			};
-
-			platform {
-				sound-dai = <&q6apm>;
-			};
-		};
-
-		wcd-capture-dai-link {
-			link-name = "WCD Capture";
-
-			cpu {
-				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
-			};
-
-			codec {
-				sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
-			};
-
-			platform {
-				sound-dai = <&q6apm>;
-			};
-		};
-
-		wsa-dai-link {
-			link-name = "WSA Playback";
-
-			cpu {
-				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
-			};
-
-			codec {
-				sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
-			};
-
-			platform {
-				sound-dai = <&q6apm>;
-			};
-		};
-
-		va-dai-link {
-			link-name = "VA Capture";
-
-			cpu {
-				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
-			};
-
-			codec {
-				sound-dai = <&lpass_vamacro 0>;
-			};
-
-			platform {
-				sound-dai = <&q6apm>;
-			};
-		};
-	};
-
-	vreg_edp_3p3: regulator-edp-3p3 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VREG_EDP_3P3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-0 = <&edp_reg_en>;
-		pinctrl-names = "default";
-
-		regulator-boot-on;
-	};
-
-	vreg_edp_bl: regulator-edp-bl {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VBL9";
-		regulator-min-microvolt = <3600000>;
-		regulator-max-microvolt = <3600000>;
-
-		gpio = <&pmc8380_3_gpios 10 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&edp_bl_reg_en>;
-
-		regulator-boot-on;
-	};
-
-	vreg_misc_3p3: regulator-misc-3p3 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VREG_MISC_3P3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&pm8550ve_8_gpios 6 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&misc_3p3_reg_en>;
-
-		regulator-boot-on;
-		regulator-always-on;
-	};
-
-	vreg_nvme: regulator-nvme {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VREG_NVME_3P3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-0 = <&nvme_reg_en>;
-		pinctrl-names = "default";
-
-		regulator-boot-on;
-	};
-
-	vreg_rtmr0_1p15: regulator-rtmr0-1p15 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VREG_RTMR0_1P15";
-		regulator-min-microvolt = <1150000>;
-		regulator-max-microvolt = <1150000>;
-
-		gpio = <&pmc8380_5_gpios 8 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-0 = <&usb0_pwr_1p15_reg_en>;
-		pinctrl-names = "default";
-
-		regulator-boot-on;
-	};
-
-	vreg_rtmr0_1p8: regulator-rtmr0-1p8 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VREG_RTMR0_1P8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-
-		gpio = <&pm8550ve_9_gpios 8 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-0 = <&usb0_1p8_reg_en>;
-		pinctrl-names = "default";
-
-		regulator-boot-on;
-	};
-
-	vreg_rtmr0_3p3: regulator-rtmr0-3p3 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VREG_RTMR0_3P3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&pm8550_gpios 11 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-0 = <&usb0_3p3_reg_en>;
-		pinctrl-names = "default";
-
-		regulator-boot-on;
-	};
-
-	vreg_vph_pwr: regulator-vph-pwr {
-		compatible = "regulator-fixed";
-
-		regulator-name = "vreg_vph_pwr";
-		regulator-min-microvolt = <3700000>;
-		regulator-max-microvolt = <3700000>;
-
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vreg_wcn_3p3: regulator-wcn-3p3 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VREG_WCN_3P3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-
-		gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
-		enable-active-high;
-
-		pinctrl-0 = <&wcn_sw_en>;
-		pinctrl-names = "default";
-
-		regulator-boot-on;
-	};
-
-	/*
-	 * TODO: These two regulators are actually part of the removable M.2
-	 * card and not the CRD mainboard. Need to describe this differently.
-	 * Functionally it works correctly, because all we need to do is to
-	 * turn on the actual 3.3V supply above.
-	 */
-	vreg_wcn_0p95: regulator-wcn-0p95 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VREG_WCN_0P95";
-		regulator-min-microvolt = <950000>;
-		regulator-max-microvolt = <950000>;
-
-		vin-supply = <&vreg_wcn_3p3>;
-	};
-
-	vreg_wcn_1p9: regulator-wcn-1p9 {
-		compatible = "regulator-fixed";
-
-		regulator-name = "VREG_WCN_1P9";
-		regulator-min-microvolt = <1900000>;
-		regulator-max-microvolt = <1900000>;
-
-		vin-supply = <&vreg_wcn_3p3>;
-	};
-
-	wcn6855-pmu {
-		compatible = "qcom,wcn6855-pmu";
-
-		vddaon-supply = <&vreg_wcn_0p95>;
-		vddio-supply = <&vreg_wcn_1p9>;
-		vddpcie1p3-supply = <&vreg_wcn_1p9>;
-		vddpcie1p9-supply = <&vreg_wcn_1p9>;
-		vddpmu-supply = <&vreg_wcn_0p95>;
-		vddpmumx-supply = <&vreg_wcn_0p95>;
-		vddpmucx-supply = <&vreg_wcn_0p95>;
-		vddrfa0p95-supply = <&vreg_wcn_0p95>;
-		vddrfa1p3-supply = <&vreg_wcn_1p9>;
-		vddrfa1p9-supply = <&vreg_wcn_1p9>;
-
-		wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
-		bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
-
-		pinctrl-0 = <&wcn_wlan_bt_en>;
-		pinctrl-names = "default";
-
-		regulators {
-			vreg_pmu_rfa_cmn_0p8: ldo0 {
-				regulator-name = "vreg_pmu_rfa_cmn_0p8";
-			};
-
-			vreg_pmu_aon_0p8: ldo1 {
-				regulator-name = "vreg_pmu_aon_0p8";
-			};
-
-			vreg_pmu_wlcx_0p8: ldo2 {
-				regulator-name = "vreg_pmu_wlcx_0p8";
-			};
-
-			vreg_pmu_wlmx_0p8: ldo3 {
-				regulator-name = "vreg_pmu_wlmx_0p8";
-			};
-
-			vreg_pmu_btcmx_0p8: ldo4 {
-				regulator-name = "vreg_pmu_btcmx_0p8";
-			};
-
-			vreg_pmu_pcie_1p8: ldo5 {
-				regulator-name = "vreg_pmu_pcie_1p8";
-			};
-
-			vreg_pmu_pcie_0p9: ldo6 {
-				regulator-name = "vreg_pmu_pcie_0p9";
-			};
-
-			vreg_pmu_rfa_0p8: ldo7 {
-				regulator-name = "vreg_pmu_rfa_0p8";
-			};
-
-			vreg_pmu_rfa_1p2: ldo8 {
-				regulator-name = "vreg_pmu_rfa_1p2";
-			};
-
-			vreg_pmu_rfa_1p7: ldo9 {
-				regulator-name = "vreg_pmu_rfa_1p7";
-			};
-		};
-	};
-
-	usb-1-ss1-sbu-mux {
-		compatible = "onnn,fsusb42", "gpio-sbu-mux";
-
-		enable-gpios = <&tlmm 179 GPIO_ACTIVE_LOW>;
-		select-gpios = <&tlmm 178 GPIO_ACTIVE_HIGH>;
-
-		pinctrl-0 = <&usb_1_ss1_sbu_default>;
-		pinctrl-names = "default";
-
-		mode-switch;
-		orientation-switch;
-
-		port {
-			usb_1_ss1_sbu_mux: endpoint {
-				remote-endpoint = <&pmic_glink_ss1_sbu>;
-			};
-		};
-	};
 };
 
-&apps_rsc {
-	regulators-0 {
-		compatible = "qcom,pm8550-rpmh-regulators";
-		qcom,pmic-id = "b";
-
-		vdd-bob1-supply = <&vreg_vph_pwr>;
-		vdd-bob2-supply = <&vreg_vph_pwr>;
-		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
-		vdd-l2-l13-l14-supply = <&vreg_bob1>;
-		vdd-l5-l16-supply = <&vreg_bob1>;
-		vdd-l6-l7-supply = <&vreg_bob2>;
-		vdd-l8-l9-supply = <&vreg_bob1>;
-		vdd-l12-supply = <&vreg_s5j_1p2>;
-		vdd-l15-supply = <&vreg_s4c_1p8>;
-		vdd-l17-supply = <&vreg_bob2>;
-
-		vreg_bob1: bob1 {
-			regulator-name = "vreg_bob1";
-			regulator-min-microvolt = <3008000>;
-			regulator-max-microvolt = <3960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_bob2: bob2 {
-			regulator-name = "vreg_bob2";
-			regulator-min-microvolt = <2504000>;
-			regulator-max-microvolt = <3008000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l1b_1p8: ldo1 {
-			regulator-name = "vreg_l1b_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2b_3p0: ldo2 {
-			regulator-name = "vreg_l2b_3p0";
-			regulator-min-microvolt = <3072000>;
-			regulator-max-microvolt = <3100000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l4b_1p8: ldo4 {
-			regulator-name = "vreg_l4b_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l5b_3p0: ldo5 {
-			regulator-name = "vreg_l5b_3p0";
-			regulator-min-microvolt = <3000000>;
-			regulator-max-microvolt = <3000000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l6b_1p8: ldo6 {
-			regulator-name = "vreg_l6b_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <2960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l7b_2p8: ldo7 {
-			regulator-name = "vreg_l7b_2p8";
-			regulator-min-microvolt = <2800000>;
-			regulator-max-microvolt = <2800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l8b_3p0: ldo8 {
-			regulator-name = "vreg_l8b_3p0";
-			regulator-min-microvolt = <3072000>;
-			regulator-max-microvolt = <3072000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l9b_2p9: ldo9 {
-			regulator-name = "vreg_l9b_2p9";
-			regulator-min-microvolt = <2960000>;
-			regulator-max-microvolt = <2960000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l10b_1p8: ldo10 {
-			regulator-name = "vreg_l10b_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l12b_1p2: ldo12 {
-			regulator-name = "vreg_l12b_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-always-on;
-		};
-
-		vreg_l13b_3p0: ldo13 {
-			regulator-name = "vreg_l13b_3p0";
-			regulator-min-microvolt = <3072000>;
-			regulator-max-microvolt = <3100000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l14b_3p0: ldo14 {
-			regulator-name = "vreg_l14b_3p0";
-			regulator-min-microvolt = <3072000>;
-			regulator-max-microvolt = <3072000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l15b_1p8: ldo15 {
-			regulator-name = "vreg_l15b_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-			regulator-always-on;
-		};
-
-		vreg_l16b_2p9: ldo16 {
-			regulator-name = "vreg_l16b_2p9";
-			regulator-min-microvolt = <2912000>;
-			regulator-max-microvolt = <2912000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l17b_2p5: ldo17 {
-			regulator-name = "vreg_l17b_2p5";
-			regulator-min-microvolt = <2504000>;
-			regulator-max-microvolt = <2504000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-1 {
-		compatible = "qcom,pm8550ve-rpmh-regulators";
-		qcom,pmic-id = "c";
-
-		vdd-l1-supply = <&vreg_s5j_1p2>;
-		vdd-l2-supply = <&vreg_s1f_0p7>;
-		vdd-l3-supply = <&vreg_s1f_0p7>;
-		vdd-s4-supply = <&vreg_vph_pwr>;
-
-		vreg_s4c_1p8: smps4 {
-			regulator-name = "vreg_s4c_1p8";
-			regulator-min-microvolt = <1856000>;
-			regulator-max-microvolt = <2000000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l1c_1p2: ldo1 {
-			regulator-name = "vreg_l1c_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2c_0p8: ldo2 {
-			regulator-name = "vreg_l2c_0p8";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <920000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3c_0p8: ldo3 {
-			regulator-name = "vreg_l3c_0p8";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <920000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-2 {
-		compatible = "qcom,pmc8380-rpmh-regulators";
-		qcom,pmic-id = "d";
-
-		vdd-l1-supply = <&vreg_s1f_0p7>;
-		vdd-l2-supply = <&vreg_s1f_0p7>;
-		vdd-l3-supply = <&vreg_s4c_1p8>;
-		vdd-s1-supply = <&vreg_vph_pwr>;
-
-		vreg_l1d_0p8: ldo1 {
-			regulator-name = "vreg_l1d_0p8";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <920000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2d_0p9: ldo2 {
-			regulator-name = "vreg_l2d_0p9";
-			regulator-min-microvolt = <912000>;
-			regulator-max-microvolt = <920000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3d_1p8: ldo3 {
-			regulator-name = "vreg_l3d_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-3 {
-		compatible = "qcom,pmc8380-rpmh-regulators";
-		qcom,pmic-id = "e";
-
-		vdd-l2-supply = <&vreg_s1f_0p7>;
-		vdd-l3-supply = <&vreg_s5j_1p2>;
-
-		vreg_l2e_0p8: ldo2 {
-			regulator-name = "vreg_l2e_0p8";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <920000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3e_1p2: ldo3 {
-			regulator-name = "vreg_l3e_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-4 {
-		compatible = "qcom,pmc8380-rpmh-regulators";
-		qcom,pmic-id = "f";
-
-		vdd-l1-supply = <&vreg_s5j_1p2>;
-		vdd-l2-supply = <&vreg_s5j_1p2>;
-		vdd-l3-supply = <&vreg_s5j_1p2>;
-		vdd-s1-supply = <&vreg_vph_pwr>;
-
-		vreg_s1f_0p7: smps1 {
-			regulator-name = "vreg_s1f_0p7";
-			regulator-min-microvolt = <700000>;
-			regulator-max-microvolt = <1100000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l1f_1p0: ldo1 {
-			regulator-name = "vreg_l1f_1p0";
-			regulator-min-microvolt = <1024000>;
-			regulator-max-microvolt = <1024000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2f_1p0: ldo2 {
-			regulator-name = "vreg_l2f_1p0";
-			regulator-min-microvolt = <1024000>;
-			regulator-max-microvolt = <1024000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3f_1p0: ldo3 {
-			regulator-name = "vreg_l3f_1p0";
-			regulator-min-microvolt = <1024000>;
-			regulator-max-microvolt = <1024000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-6 {
-		compatible = "qcom,pm8550ve-rpmh-regulators";
-		qcom,pmic-id = "i";
-
-		vdd-l1-supply = <&vreg_s4c_1p8>;
-		vdd-l2-supply = <&vreg_s5j_1p2>;
-		vdd-l3-supply = <&vreg_s1f_0p7>;
-		vdd-s1-supply = <&vreg_vph_pwr>;
-		vdd-s2-supply = <&vreg_vph_pwr>;
-
-		vreg_s1i_0p9: smps1 {
-			regulator-name = "vreg_s1i_0p9";
-			regulator-min-microvolt = <900000>;
-			regulator-max-microvolt = <920000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_s2i_1p0: smps2 {
-			regulator-name = "vreg_s2i_1p0";
-			regulator-min-microvolt = <1000000>;
-			regulator-max-microvolt = <1100000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l1i_1p8: ldo1 {
-			regulator-name = "vreg_l1i_1p8";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2i_1p2: ldo2 {
-			regulator-name = "vreg_l2i_1p2";
-			regulator-min-microvolt = <1200000>;
-			regulator-max-microvolt = <1200000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3i_0p8: ldo3 {
-			regulator-name = "vreg_l3i_0p8";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <920000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-
-	regulators-7 {
-		compatible = "qcom,pm8550ve-rpmh-regulators";
-		qcom,pmic-id = "j";
-
-		vdd-l1-supply = <&vreg_s1f_0p7>;
-		vdd-l2-supply = <&vreg_s5j_1p2>;
-		vdd-l3-supply = <&vreg_s1f_0p7>;
-		vdd-s5-supply = <&vreg_vph_pwr>;
-
-		vreg_s5j_1p2: smps5 {
-			regulator-name = "vreg_s5j_1p2";
-			regulator-min-microvolt = <1256000>;
-			regulator-max-microvolt = <1304000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l1j_0p8: ldo1 {
-			regulator-name = "vreg_l1j_0p8";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <920000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l2j_1p2: ldo2 {
-			regulator-name = "vreg_l2j_1p2";
-			regulator-min-microvolt = <1256000>;
-			regulator-max-microvolt = <1256000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-
-		vreg_l3j_0p8: ldo3 {
-			regulator-name = "vreg_l3j_0p8";
-			regulator-min-microvolt = <880000>;
-			regulator-max-microvolt = <920000>;
-			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
-		};
-	};
-};
-
-&gpu {
-	status = "okay";
-
-	zap-shader {
-		firmware-name = "qcom/x1e80100/hp/omnibook-x14/qcdxkmsuc8380.mbn";
-	};
-};
-
-&i2c0 {
-	clock-frequency = <400000>;
-
-	status = "okay";
-
-	keyboard@3a {
-		compatible = "hid-over-i2c";
-		reg = <0x3a>;
-
-		hid-descr-addr = <0x1>;
-		interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
-
-		vdd-supply = <&vreg_misc_3p3>;
-		vddl-supply = <&vreg_l12b_1p2>;
-
-		pinctrl-0 = <&kybd_default>;
-		pinctrl-names = "default";
-
-		wakeup-source;
-	};
-
-	touchpad@15 {
-		compatible = "hid-over-i2c";
-		reg = <0x15>;
-
-		hid-descr-addr = <0x1>;
-		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
-
-		vdd-supply = <&vreg_misc_3p3>;
-		vddl-supply = <&vreg_l12b_1p2>;
-
-		pinctrl-0 = <&tpad_default>;
-		pinctrl-names = "default";
-
-		wakeup-source;
-	};
-};
-
-&i2c3 {
-	clock-frequency = <400000>;
-
-	status = "okay";
-
-	typec-mux@8 {
-		compatible = "parade,ps8830";
-		reg = <0x08>;
-
-		clocks = <&rpmhcc RPMH_RF_CLK3>;
-
-		vdd-supply = <&vreg_rtmr0_1p15>;
-		vdd33-supply = <&vreg_rtmr0_3p3>;
-		vdd33-cap-supply = <&vreg_rtmr0_3p3>;
-		vddar-supply = <&vreg_rtmr0_1p15>;
-		vddat-supply = <&vreg_rtmr0_1p15>;
-		vddio-supply = <&vreg_rtmr0_1p8>;
-
-		reset-gpios = <&pm8550_gpios 10 GPIO_ACTIVE_LOW>;
-
-		pinctrl-0 = <&rtmr0_default>;
-		pinctrl-names = "default";
-
-		orientation-switch;
-		retimer-switch;
-
-		ports {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
-			port@0 {
-				reg = <0>;
-
-				retimer_ss0_ss_out: endpoint {
-					remote-endpoint = <&pmic_glink_ss0_ss_in>;
-				};
-			};
-
-			port@1 {
-				reg = <1>;
-
-				retimer_ss0_ss_in: endpoint {
-					remote-endpoint = <&usb_1_ss0_qmpphy_out>;
-				};
-			};
-
-			port@2 {
-				reg = <2>;
-
-				retimer_ss0_con_sbu_out: endpoint {
-					remote-endpoint = <&pmic_glink_ss0_con_sbu_in>;
-				};
-			};
-		};
-	};
-};
-
-&i2c5 {
-	clock-frequency = <400000>;
-	status = "okay";
-
-	eusb3_repeater: redriver@47 {
-		compatible = "nxp,ptn3222";
-		reg = <0x47>;
-		#phy-cells = <0>;
-
-		vdd3v3-supply = <&vreg_l13b_3p0>;
-		vdd1v8-supply = <&vreg_l4b_1p8>;
-
-		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
-
-		pinctrl-0 = <&eusb3_reset_n>;
-		pinctrl-names = "default";
-
-	};
-};
-
-&i2c8 {
-	clock-frequency = <400000>;
-
-	status = "okay";
-
-	touchscreen@10 {
-		compatible = "hid-over-i2c";
-		reg = <0x10>;
-
-		hid-descr-addr = <0x1>;
-		interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
-
-		vdd-supply = <&vreg_misc_3p3>;
-		vddl-supply = <&vreg_l15b_1p8>;
-
-		pinctrl-0 = <&ts0_default>;
-		pinctrl-names = "default";
-	};
-};
-
-&lpass_tlmm {
-	spkr_01_sd_n_active: spkr-01-sd-n-active-state {
-		pins = "gpio12";
-		function = "gpio";
-		drive-strength = <16>;
-		bias-disable;
-		output-low;
-	};
-};
-
-&lpass_vamacro {
-	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
-	pinctrl-names = "default";
-
-	vdd-micb-supply = <&vreg_l1b_1p8>;
-	qcom,dmic-sample-rate = <4800000>;
-};
-
-&mdss {
-	status = "okay";
-};
-
-&mdss_dp0 {
-	status = "okay";
-};
-
-&mdss_dp0_out {
-	data-lanes = <0 1>;
-	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
-};
-
-&mdss_dp1 {
-	status = "okay";
-};
-
-&mdss_dp1_out {
-	data-lanes = <0 1>;
-	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
-};
-
-&mdss_dp3 {
-	/delete-property/ #sound-dai-cells;
-
-	status = "okay";
-
-	aux-bus {
-		panel {
-			compatible = "edp-panel";
-			power-supply = <&vreg_edp_3p3>;
-
-			backlight = <&backlight>;
-
-			port {
-				edp_panel_in: endpoint {
-					remote-endpoint = <&mdss_dp3_out>;
-				};
-			};
-		};
-	};
-
-	ports {
-		port@1 {
-			reg = <1>;
-
-			mdss_dp3_out: endpoint {
-				data-lanes = <0 1 2 3>;
-				link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
-
-				remote-endpoint = <&edp_panel_in>;
-			};
-		};
-	};
-};
-
-&mdss_dp3_phy {
-	vdda-phy-supply = <&vreg_l3j_0p8>;
-	vdda-pll-supply = <&vreg_l2j_1p2>;
-
-	status = "okay";
-};
-
-&pcie4 {
-	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
-
-	pinctrl-0 = <&pcie4_default>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&pcie4_phy {
-	vdda-phy-supply = <&vreg_l3i_0p8>;
-	vdda-pll-supply = <&vreg_l3e_1p2>;
-
-	status = "okay";
-};
-
-&pcie4_port0 {
-	wifi@0 {
-		compatible = "pci17cb,1107";
-		reg = <0x10000 0x0 0x0 0x0 0x0>;
-
-		vddaon-supply = <&vreg_pmu_aon_0p8>;
-		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
-		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
-		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
-		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
-		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
-		vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
-		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
-		vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
-	};
-};
-
-&pcie6a {
-	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
-
-	vddpe-3v3-supply = <&vreg_nvme>;
-
-	pinctrl-0 = <&pcie6a_default>;
-	pinctrl-names = "default";
-
-	status = "okay";
-};
-
-&pcie6a_phy {
-	vdda-phy-supply = <&vreg_l1d_0p8>;
-	vdda-pll-supply = <&vreg_l2j_1p2>;
-
-	status = "okay";
-};
-
-&pm8550_gpios {
-	rtmr0_default: rtmr0-reset-n-active-state {
-		pins = "gpio10";
-		function = "normal";
-		power-source = <1>; /* 1.8V */
-		bias-disable;
-		input-disable;
-		output-enable;
-	};
-
-	usb0_3p3_reg_en: usb0-3p3-reg-en-state {
-		pins = "gpio11";
-		function = "normal";
-		power-source = <1>; /* 1.8V */
-		bias-disable;
-		input-disable;
-		output-enable;
-	};
-};
-
-&pm8550ve_8_gpios {
-	misc_3p3_reg_en: misc-3p3-reg-en-state {
-		pins = "gpio6";
-		function = "normal";
-		bias-disable;
-		drive-push-pull;
-		input-disable;
-		output-enable;
-		power-source = <1>; /* 1.8 V */
-		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
-	};
-};
-
-&pm8550ve_9_gpios {
-	usb0_1p8_reg_en: usb0-1p8-reg-en-state {
-		pins = "gpio8";
-		function = "normal";
-		power-source = <1>; /* 1.8V */
-		bias-disable;
-		input-disable;
-		output-enable;
-	};
-};
-
-&pmc8380_3_gpios {
-	edp_bl_en: edp-bl-en-state {
-		pins = "gpio4";
-		function = "normal";
-		power-source = <1>; /* 1.8V */
-		input-disable;
-		output-enable;
-	};
-
-	edp_bl_reg_en: edp-bl-reg-en-state {
-		pins = "gpio10";
-		function = "normal";
-	};
-
-};
-
-&pmc8380_5_gpios {
-	usb0_pwr_1p15_reg_en: usb0-pwr-1p15-reg-en-state {
-		pins = "gpio8";
-		function = "normal";
-		power-source = <1>; /* 1.8V */
-		bias-disable;
-		input-disable;
-		output-enable;
-	};
-};
-
-&pmk8550_gpios {
-	edp_bl_pwm: edp-bl-pwm-state {
-		pins = "gpio5";
-		function = "func3";
-	};
-};
-
-&pmk8550_pwm {
-	status = "okay";
-};
-
-&qupv3_0 {
-	status = "okay";
-};
-
-&qupv3_1 {
-	status = "okay";
-};
-
-&qupv3_2 {
-	status = "okay";
+&gpu_zap_shader {
+	firmware-name = "qcom/x1e80100/hp/omnibook-x14/qcdxkmsuc8380.mbn";
 };
 
 &remoteproc_adsp {
@@ -1242,335 +33,3 @@
 
 	status = "okay";
 };
-
-&smb2360_0 {
-	status = "okay";
-};
-
-&smb2360_0_eusb2_repeater {
-	vdd18-supply = <&vreg_l3d_1p8>;
-	vdd3-supply = <&vreg_l2b_3p0>;
-};
-
-&smb2360_1 {
-	status = "okay";
-};
-
-&smb2360_1_eusb2_repeater {
-	vdd18-supply = <&vreg_l3d_1p8>;
-	vdd3-supply = <&vreg_l14b_3p0>;
-};
-
-&swr0 {
-	pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
-	pinctrl-names = "default";
-
-	status = "okay";
-
-	/* WSA8845, Left Speaker */
-	left_spkr: speaker@0,0 {
-		compatible = "sdw20217020400";
-		reg = <0 0>;
-		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
-		#sound-dai-cells = <0>;
-		sound-name-prefix = "SpkrLeft";
-		vdd-1p8-supply = <&vreg_l15b_1p8>;
-		vdd-io-supply = <&vreg_l12b_1p2>;
-		qcom,port-mapping = <1 2 3 7 10 13>;
-	};
-
-	/* WSA8845, Right Speaker */
-	right_spkr: speaker@0,1 {
-		compatible = "sdw20217020400";
-		reg = <0 1>;
-		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
-		#sound-dai-cells = <0>;
-		sound-name-prefix = "SpkrRight";
-		vdd-1p8-supply = <&vreg_l15b_1p8>;
-		vdd-io-supply = <&vreg_l12b_1p2>;
-		qcom,port-mapping = <4 5 6 7 11 13>;
-	};
-};
-
-&swr1 {
-	status = "okay";
-
-	/* WCD9385 RX */
-	wcd_rx: codec@0,4 {
-		compatible = "sdw20217010d00";
-		reg = <0 4>;
-		qcom,rx-port-mapping = <1 2 3 4 5>;
-	};
-};
-
-&swr2 {
-	status = "okay";
-
-	/* WCD9385 TX */
-	wcd_tx: codec@0,3 {
-		compatible = "sdw20217010d00";
-		reg = <0 3>;
-		qcom,tx-port-mapping = <2 2 3 4>;
-	};
-};
-
-&tlmm {
-	gpio-reserved-ranges = <34 2>, /* Unused */
-			       <44 4>, /* SPI (TPM) */
-			       <72 2>, /* Secure EC I2C connection (?) */
-			       <238 1>; /* UFS Reset */
-
-	edp_reg_en: edp-reg-en-state {
-		pins = "gpio70";
-		function = "gpio";
-		drive-strength = <16>;
-		bias-disable;
-	};
-
-	eusb3_reset_n: eusb3-reset-n-state {
-		pins = "gpio6";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-		output-low;
-	};
-
-	hall_int_n_default: hall-int-n-state {
-		pins = "gpio92";
-		function = "gpio";
-		bias-disable;
-	};
-
-	kybd_default: kybd-default-state {
-		pins = "gpio67";
-		function = "gpio";
-		bias-pull-up;
-	};
-
-	nvme_reg_en: nvme-reg-en-state {
-		pins = "gpio18";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	pcie4_default: pcie4-default-state {
-		clkreq-n-pins {
-			pins = "gpio147";
-			function = "pcie4_clk";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-
-		perst-n-pins {
-			pins = "gpio146";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-disable;
-		};
-
-		wake-n-pins {
-			pins = "gpio148";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	pcie6a_default: pcie6a-default-state {
-		clkreq-n-pins {
-			pins = "gpio153";
-			function = "pcie6a_clk";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-
-		perst-n-pins {
-			pins = "gpio152";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-disable;
-		};
-
-		wake-n-pins {
-			pins = "gpio154";
-			function = "gpio";
-			drive-strength = <2>;
-			bias-pull-up;
-		};
-	};
-
-	tpad_default: tpad-default-state {
-		pins = "gpio3";
-		function = "gpio";
-		bias-pull-up;
-	};
-
-	ts0_default: ts0-default-state {
-		int-n-pins {
-			pins = "gpio51";
-			function = "gpio";
-			bias-pull-up;
-		};
-
-		reset-n-pins {
-			pins = "gpio48";
-			function = "gpio";
-			output-high;
-			drive-strength = <16>;
-		};
-	};
-
-	usb_1_ss1_sbu_default: usb-1-ss1-sbu-state {
-		mode-pins {
-			pins = "gpio177";
-			function = "gpio";
-			bias-disable;
-			drive-strength = <2>;
-			output-high;
-		};
-
-		oe-n-pins {
-			pins = "gpio179";
-			function = "gpio";
-			bias-disable;
-			drive-strength = <2>;
-		};
-
-		sel-pins {
-			pins = "gpio178";
-			function = "gpio";
-			bias-disable;
-			drive-strength = <2>;
-		};
-	};
-
-	wcd_default: wcd-reset-n-active-state {
-		pins = "gpio191";
-		function = "gpio";
-		drive-strength = <16>;
-		bias-disable;
-		output-low;
-	};
-
-	wcn_sw_en: wcn-sw-en-state {
-		pins = "gpio214";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-
-	wcn_wlan_bt_en: wcn-wlan-bt-en-state {
-		pins = "gpio116", "gpio117";
-		function = "gpio";
-		drive-strength = <2>;
-		bias-disable;
-	};
-};
-
-&uart14 {
-	status = "okay";
-
-	bluetooth {
-		compatible = "qcom,wcn6855-bt";
-		max-speed = <3200000>;
-
-		vddrfacmn-supply = <&vreg_pmu_rfa_cmn_0p8>;
-		vddaon-supply = <&vreg_pmu_aon_0p8>;
-		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
-		vddwlmx-supply = <&vreg_pmu_wlmx_0p8>;
-		vddbtcmx-supply = <&vreg_pmu_btcmx_0p8>;
-		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
-		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
-		vddrfa1p8-supply = <&vreg_pmu_rfa_1p7>;
-	};
-};
-
-&usb_1_ss0_hsphy {
-	vdd-supply = <&vreg_l3j_0p8>;
-	vdda12-supply = <&vreg_l2j_1p2>;
-
-	phys = <&smb2360_0_eusb2_repeater>;
-
-	status = "okay";
-};
-
-&usb_1_ss0_qmpphy {
-	vdda-phy-supply = <&vreg_l3e_1p2>;
-	vdda-pll-supply = <&vreg_l1j_0p8>;
-
-	status = "okay";
-};
-
-&usb_1_ss0 {
-	status = "okay";
-};
-
-&usb_1_ss0_dwc3 {
-	dr_mode = "host";
-};
-
-&usb_1_ss0_dwc3_hs {
-	remote-endpoint = <&pmic_glink_ss0_hs_in>;
-};
-
-&usb_1_ss0_qmpphy_out {
-	remote-endpoint = <&retimer_ss0_ss_in>;
-};
-
-&usb_1_ss1_hsphy {
-	vdd-supply = <&vreg_l3j_0p8>;
-	vdda12-supply = <&vreg_l2j_1p2>;
-
-	phys = <&smb2360_1_eusb2_repeater>;
-
-	status = "okay";
-};
-
-&usb_1_ss1_qmpphy {
-	vdda-phy-supply = <&vreg_l3e_1p2>;
-	vdda-pll-supply = <&vreg_l2d_0p9>;
-
-	status = "okay";
-};
-
-&usb_1_ss1 {
-	status = "okay";
-};
-
-&usb_1_ss1_dwc3 {
-	dr_mode = "host";
-};
-
-&usb_1_ss1_dwc3_hs {
-	remote-endpoint = <&pmic_glink_ss1_hs_in>;
-};
-
-&usb_1_ss1_qmpphy_out {
-	remote-endpoint = <&pmic_glink_ss1_ss_in>;
-};
-
-&usb_mp {
-	status = "okay";
-};
-
-&usb_mp_dwc3 {
-	phys = <&usb_mp_hsphy0>, <&usb_mp_qmpphy0>;
-	phy-names = "usb2-0", "usb3-0";
-};
-
-&usb_mp_hsphy0 {
-	vdd-supply = <&vreg_l2e_0p8>;
-	vdda12-supply = <&vreg_l3e_1p2>;
-
-	phys = <&eusb3_repeater>;
-
-	status = "okay";
-};
-
-&usb_mp_qmpphy0 {
-	vdda-phy-supply = <&vreg_l3e_1p2>;
-	vdda-pll-supply = <&vreg_l3c_0p8>;
-
-	status = "okay";
-};
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
index dad0f11e8e85..e0642fe8343f 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-lenovo-yoga-slim7x.dts
@@ -18,6 +18,7 @@
 
 	aliases {
 		serial0 = &uart21;
+		serial1 = &uart14;
 	};
 
 	chosen {
@@ -404,6 +405,107 @@
 		regulator-always-on;
 		regulator-boot-on;
 	};
+
+	vreg_wcn_3p3: regulator-wcn-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wcn_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	/*
+	 * TODO: These two regulators are actually part of the removable M.2
+	 * card and not the CRD mainboard. Need to describe this differently.
+	 * Functionally it works correctly, because all we need to do is to
+	 * turn on the actual 3.3V supply above.
+	 */
+	vreg_wcn_0p95: regulator-wcn-0p95 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_0P95";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <950000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_1p9: regulator-wcn-1p9 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_1P9";
+		regulator-min-microvolt = <1900000>;
+		regulator-max-microvolt = <1900000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	wcn7850-pmu {
+		compatible = "qcom,wcn7850-pmu";
+
+		vdd-supply = <&vreg_wcn_0p95>;
+		vddio-supply = <&vreg_l15b_1p8>;
+		vddaon-supply = <&vreg_wcn_0p95>;
+		vdddig-supply = <&vreg_wcn_0p95>;
+		vddrfa1p2-supply = <&vreg_wcn_1p9>;
+		vddrfa1p8-supply = <&vreg_wcn_1p9>;
+
+		wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&wcn_wlan_bt_en>;
+		pinctrl-names = "default";
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -924,6 +1026,11 @@
 	};
 };
 
+&iris {
+	firmware-name = "qcom/x1e80100/LENOVO/83ED/qcvss8380.mbn";
+	status = "okay";
+};
+
 &lpass_tlmm {
 	spkr_01_sd_n_active: spkr-01-sd-n-active-state {
 		pins = "gpio12";
@@ -959,7 +1066,6 @@
 };
 
 &mdss_dp0_out {
-	data-lanes = <0 1>;
 	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 };
 
@@ -968,7 +1074,6 @@
 };
 
 &mdss_dp1_out {
-	data-lanes = <0 1>;
 	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 };
 
@@ -977,13 +1082,15 @@
 };
 
 &mdss_dp2_out {
-	data-lanes = <0 1>;
 	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 };
 
 &mdss_dp3 {
 	/delete-property/ #sound-dai-cells;
 
+	pinctrl-0 = <&edp0_hpd_default>;
+	pinctrl-names = "default";
+
 	status = "okay";
 
 	aux-bus {
@@ -1002,19 +1109,13 @@
 			};
 		};
 	};
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-
-			mdss_dp3_out: endpoint {
-				data-lanes = <0 1 2 3>;
-				link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+&mdss_dp3_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 
-				remote-endpoint = <&edp_panel_in>;
-			};
-		};
-	};
+	remote-endpoint = <&edp_panel_in>;
 };
 
 &mdss_dp3_phy {
@@ -1045,6 +1146,16 @@
 	wifi@0 {
 		compatible = "pci17cb,1107";
 		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
 	};
 };
 
@@ -1403,6 +1514,37 @@
 		drive-strength = <2>;
 		bias-disable;
 	};
+
+	wcn_sw_en: wcn-sw-en-state {
+		pins = "gpio214";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wcn_wlan_bt_en: wcn-wlan-bt-en-state {
+		pins = "gpio116", "gpio117";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+		max-speed = <3200000>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+	};
 };
 
 &uart21 {
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi b/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi
index 0fd8516580b2..ed468b93ba50 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100-microsoft-romulus.dtsi
@@ -331,6 +331,42 @@
 		regulator-boot-on;
 	};
 
+	vreg_wcn_0p95: regulator-wcn-0p95 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_0P95";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <950000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_1p9: regulator-wcn-1p9 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_1P9";
+		regulator-min-microvolt = <1900000>;
+		regulator-max-microvolt = <1900000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_3p3: regulator-wcn-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wcn_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
 	sound {
 		compatible = "qcom,x1e80100-sndcard";
 		model = "X1E80100-Romulus";
@@ -410,6 +446,65 @@
 			};
 		};
 	};
+
+	wcn7850-pmu {
+		compatible = "qcom,wcn7850-pmu";
+
+		vdd-supply = <&vreg_wcn_0p95>;
+		vddio-supply = <&vreg_l15b>;
+		vddaon-supply = <&vreg_wcn_0p95>;
+		vdddig-supply = <&vreg_wcn_0p95>;
+		vddrfa1p2-supply = <&vreg_wcn_1p9>;
+		vddrfa1p8-supply = <&vreg_wcn_1p9>;
+
+		wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&wcn_wlan_bt_en>;
+		pinctrl-names = "default";
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
 };
 
 &apps_rsc {
@@ -949,7 +1044,6 @@
 };
 
 &mdss_dp0_out {
-	data-lanes = <0 1>;
 	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 };
 
@@ -958,13 +1052,15 @@
 };
 
 &mdss_dp1_out {
-	data-lanes = <0 1>;
 	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 };
 
 &mdss_dp3 {
 	/delete-property/ #sound-dai-cells;
 
+	pinctrl-0 = <&edp0_hpd_default>;
+	pinctrl-names = "default";
+
 	status = "okay";
 
 	aux-bus {
@@ -981,19 +1077,13 @@
 			};
 		};
 	};
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-
-			mdss_dp3_out: endpoint {
-				data-lanes = <0 1 2 3>;
-				link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+&mdss_dp3_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 
-				remote-endpoint = <&edp_panel_in>;
-			};
-		};
-	};
+	remote-endpoint = <&edp_panel_in>;
 };
 
 &mdss_dp3_phy {
@@ -1033,6 +1123,23 @@
 	status = "okay";
 };
 
+&pcie4_port0 {
+	wifi@0 {
+		compatible = "pci17cb,1107";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+	};
+};
+
 &pcie6a {
 	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
@@ -1239,6 +1346,13 @@
 		bias-disable;
 	};
 
+	wcn_wlan_bt_en: wcn-wlan-bt-en-state {
+		pins = "gpio116", "gpio117";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	pcie3_default: pcie3-default-state {
 		perst-n-pins {
 			pins = "gpio143";
@@ -1314,6 +1428,13 @@
 		output-low;
 	};
 
+	wcn_sw_en: wcn-sw-en-state {
+		pins = "gpio214";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
 	cam_indicator_en: cam-indicator-en-state {
 		pins = "gpio225";
 		function = "gpio";
@@ -1337,6 +1458,23 @@
 	};
 };
 
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+		max-speed = <3200000>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+	};
+};
+
 &usb_1_ss0_hsphy {
 	vdd-supply = <&vreg_l3j>;
 	vdda12-supply = <&vreg_l2j>;
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi b/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi
index e3888bc143a0..621890ada153 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100-pmics.dtsi
@@ -475,6 +475,8 @@
 		#address-cells = <1>;
 		#size-cells = <0>;
 
+		status = "disabled";
+
 		pm8010_temp_alarm: temp-alarm@2400 {
 			compatible = "qcom,spmi-temp-alarm";
 			reg = <0x2400>;
diff --git a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
index 4dfba835af6a..4a9b6d791e7f 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
+++ b/arch/arm64/boot/dts/qcom/x1e80100-qcp.dts
@@ -318,6 +318,48 @@
 		regulator-boot-on;
 	};
 
+	vreg_pcie_12v: regulator-pcie-12v {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_PCIE_12V";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+
+		gpio = <&pm8550ve_8_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&pcie_x8_12v>;
+		pinctrl-names = "default";
+	};
+
+	vreg_pcie_3v3_aux: regulator-pcie-3v3-aux {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_PCIE_3P3_AUX";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pmc8380_3_gpios 8 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&pm_sde7_aux_3p3_en>;
+		pinctrl-names = "default";
+	};
+
+	vreg_pcie_3v3: regulator-pcie-3v3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_PCIE_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pmc8380_3_gpios 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&pm_sde7_main_3p3_en>;
+		pinctrl-names = "default";
+};
+
 	usb-1-ss0-sbu-mux {
 		compatible = "onnn,fsusb42", "gpio-sbu-mux";
 
@@ -848,7 +890,6 @@
 };
 
 &mdss_dp0_out {
-	data-lanes = <0 1>;
 	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 };
 
@@ -857,7 +898,6 @@
 };
 
 &mdss_dp1_out {
-	data-lanes = <0 1>;
 	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 };
 
@@ -866,13 +906,15 @@
 };
 
 &mdss_dp2_out {
-	data-lanes = <0 1>;
 	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 };
 
 &mdss_dp3 {
 	/delete-property/ #sound-dai-cells;
 
+	pinctrl-0 = <&edp0_hpd_default>;
+	pinctrl-names = "default";
+
 	status = "okay";
 
 	aux-bus {
@@ -887,18 +929,13 @@
 			};
 		};
 	};
+};
 
-	ports {
-		port@1 {
-			reg = <1>;
-			mdss_dp3_out: endpoint {
-				data-lanes = <0 1 2 3>;
-				link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+&mdss_dp3_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
 
-				remote-endpoint = <&edp_panel_in>;
-			};
-		};
-	};
+	remote-endpoint = <&edp_panel_in>;
 };
 
 &mdss_dp3_phy {
@@ -908,6 +945,59 @@
 	status = "okay";
 };
 
+&pm8550ve_8_gpios {
+	pcie_x8_12v: pcie-12v-default-state {
+		pins = "gpio8";
+		function = "normal";
+		output-enable;
+		output-high;
+		bias-pull-down;
+		power-source = <0>;
+	};
+};
+
+&pmc8380_3_gpios {
+	pm_sde7_aux_3p3_en: pcie-aux-3p3-default-state {
+		pins = "gpio8";
+		function = "normal";
+		output-enable;
+		output-high;
+		bias-pull-down;
+		power-source = <0>;
+	};
+
+	pm_sde7_main_3p3_en: pcie-main-3p3-default-state {
+		pins = "gpio6";
+		function = "normal";
+		output-enable;
+		output-high;
+		bias-pull-down;
+		power-source = <0>;
+	};
+};
+
+&pcie3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3_default>;
+	perst-gpios = <&tlmm 143 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 145 GPIO_ACTIVE_LOW>;
+
+	status = "okay";
+};
+
+&pcie3_phy {
+	vdda-phy-supply = <&vreg_l3c_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie3_port {
+	vpcie12v-supply = <&vreg_pcie_12v>;
+	vpcie3v3-supply = <&vreg_pcie_3v3>;
+	vpcie3v3aux-supply = <&vreg_pcie_3v3_aux>;
+};
+
 &pcie4 {
 	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
 	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
@@ -1119,6 +1209,29 @@
 		bias-disable;
 	};
 
+	pcie3_default: pcie3-default-state {
+		clkreq-n-pins {
+			pins = "gpio144";
+			function = "pcie3_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio143";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-down;
+		};
+
+		wake-n-pins {
+			pins = "gpio145";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
 	pcie4_default: pcie4-default-state {
 		clkreq-n-pins {
 			pins = "gpio147";
@@ -1394,7 +1507,7 @@
 	vdd-supply = <&vreg_l2e_0p8>;
 	vdda12-supply = <&vreg_l3e_1p2>;
 
-	phys = <&eusb6_repeater>;
+	phys = <&eusb3_repeater>;
 
 	status = "okay";
 };
@@ -1403,7 +1516,7 @@
 	vdd-supply = <&vreg_l2e_0p8>;
 	vdda12-supply = <&vreg_l3e_1p2>;
 
-	phys = <&eusb3_repeater>;
+	phys = <&eusb6_repeater>;
 
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/qcom/x1e80100.dtsi b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
index a9a7bb676c6f..51576d9c935d 100644
--- a/arch/arm64/boot/dts/qcom/x1e80100.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1e80100.dtsi
@@ -5,6 +5,7 @@
 
 #include <dt-bindings/clock/qcom,rpmh.h>
 #include <dt-bindings/clock/qcom,sc8280xp-lpasscc.h>
+#include <dt-bindings/clock/qcom,sm8450-videocc.h>
 #include <dt-bindings/clock/qcom,x1e80100-dispcc.h>
 #include <dt-bindings/clock/qcom,x1e80100-gcc.h>
 #include <dt-bindings/clock/qcom,x1e80100-gpucc.h>
@@ -2856,6 +2857,7 @@
 			#clock-cells = <1>;
 			#phy-cells = <1>;
 
+			mode-switch;
 			orientation-switch;
 
 			status = "disabled";
@@ -2926,6 +2928,7 @@
 			#clock-cells = <1>;
 			#phy-cells = <1>;
 
+			mode-switch;
 			orientation-switch;
 
 			status = "disabled";
@@ -2996,6 +2999,7 @@
 			#clock-cells = <1>;
 			#phy-cells = <1>;
 
+			mode-switch;
 			orientation-switch;
 
 			status = "disabled";
@@ -3306,6 +3310,17 @@
 					opp-peak-kBps = <15753000 1>;
 				};
 			};
+
+			pcie3_port: pcie@0 {
+				device_type = "pci";
+				compatible = "pciclass,0604";
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				bus-range = <0x01 0xff>;
+
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges;
+			};
 		};
 
 		pcie3_phy: phy@1be0000 {
@@ -3392,10 +3407,10 @@
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 843 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 0 844 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 0 845 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 0 772 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 843 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 844 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 845 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE_6A_AUX_CLK>,
 				 <&gcc GCC_PCIE_6A_CFG_AHB_CLK>,
@@ -3524,10 +3539,10 @@
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 70 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 0 71 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 0 72 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 0 73 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE_5_AUX_CLK>,
 				 <&gcc GCC_PCIE_5_CFG_AHB_CLK>,
@@ -3654,10 +3669,10 @@
 
 			#interrupt-cells = <1>;
 			interrupt-map-mask = <0 0 0 0x7>;
-			interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>,
-					<0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 2 &intc 0 0 GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 3 &intc 0 0 GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
+					<0 0 0 4 &intc 0 0 GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
 
 			clocks = <&gcc GCC_PCIE_4_AUX_CLK>,
 				 <&gcc GCC_PCIE_4_CFG_AHB_CLK>,
@@ -3779,6 +3794,9 @@
 			qcom,gmu = <&gmu>;
 			#cooling-cells = <2>;
 
+			nvmem-cells = <&gpu_speed_bin>;
+			nvmem-cell-names = "speed_bin";
+
 			interconnects = <&gem_noc MASTER_GFX3D 0 &mc_virt SLAVE_EBI1 0>;
 			interconnect-names = "gfx-mem";
 
@@ -3791,11 +3809,28 @@
 			gpu_opp_table: opp-table {
 				compatible = "operating-points-v2-adreno", "operating-points-v2";
 
+				opp-1500000000 {
+					opp-hz = /bits/ 64 <1500000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L5>;
+					opp-peak-kBps = <16500000>;
+					qcom,opp-acd-level = <0xa82a5ffd>;
+					opp-supported-hw = <0x03>;
+				};
+
+				opp-1375000000 {
+					opp-hz = /bits/ 64 <1375000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L4>;
+					opp-peak-kBps = <16500000>;
+					qcom,opp-acd-level = <0xa82a5ffd>;
+					opp-supported-hw = <0x03>;
+				};
+
 				opp-1250000000 {
 					opp-hz = /bits/ 64 <1250000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L3>;
 					opp-peak-kBps = <16500000>;
 					qcom,opp-acd-level = <0xa82a5ffd>;
+					opp-supported-hw = <0x07>;
 				};
 
 				opp-1175000000 {
@@ -3803,13 +3838,24 @@
 					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L2>;
 					opp-peak-kBps = <14398438>;
 					qcom,opp-acd-level = <0xa82a5ffd>;
+					opp-supported-hw = <0x07>;
 				};
 
-				opp-1100000000 {
+				opp-1100000000-0 {
 					opp-hz = /bits/ 64 <1100000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
 					opp-peak-kBps = <14398438>;
 					qcom,opp-acd-level = <0xa82a5ffd>;
+					opp-supported-hw = <0x07>;
+				};
+
+				/* Only applicable for SKUs which has 1100Mhz as Fmax */
+				opp-1100000000-1 {
+					opp-hz = /bits/ 64 <1100000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+					opp-peak-kBps = <16500000>;
+					qcom,opp-acd-level = <0xa82a5ffd>;
+					opp-supported-hw = <0x08>;
 				};
 
 				opp-1000000000 {
@@ -3817,6 +3863,7 @@
 					opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
 					opp-peak-kBps = <14398438>;
 					qcom,opp-acd-level = <0xa82b5ffd>;
+					opp-supported-hw = <0x0f>;
 				};
 
 				opp-925000000 {
@@ -3824,6 +3871,7 @@
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
 					opp-peak-kBps = <14398438>;
 					qcom,opp-acd-level = <0xa82b5ffd>;
+					opp-supported-hw = <0x0f>;
 				};
 
 				opp-800000000 {
@@ -3831,6 +3879,7 @@
 					opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
 					opp-peak-kBps = <12449219>;
 					qcom,opp-acd-level = <0xa82c5ffd>;
+					opp-supported-hw = <0x0f>;
 				};
 
 				opp-744000000 {
@@ -3838,13 +3887,24 @@
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
 					opp-peak-kBps = <10687500>;
 					qcom,opp-acd-level = <0x882e5ffd>;
+					opp-supported-hw = <0x0f>;
 				};
 
-				opp-687000000 {
+				opp-687000000-0 {
 					opp-hz = /bits/ 64 <687000000>;
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
 					opp-peak-kBps = <8171875>;
 					qcom,opp-acd-level = <0x882e5ffd>;
+					opp-supported-hw = <0x0f>;
+				};
+
+				/* Only applicable for SKUs which has 687Mhz as Fmax */
+				opp-687000000-1 {
+					opp-hz = /bits/ 64 <687000000>;
+					opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+					opp-peak-kBps = <16500000>;
+					qcom,opp-acd-level = <0x882e5ffd>;
+					opp-supported-hw = <0x10>;
 				};
 
 				opp-550000000 {
@@ -3852,6 +3912,7 @@
 					opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
 					opp-peak-kBps = <6074219>;
 					qcom,opp-acd-level = <0xc0285ffd>;
+					opp-supported-hw = <0x1f>;
 				};
 
 				opp-390000000 {
@@ -3859,6 +3920,7 @@
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
 					opp-peak-kBps = <3000000>;
 					qcom,opp-acd-level = <0xc0285ffd>;
+					opp-supported-hw = <0x1f>;
 				};
 
 				opp-300000000 {
@@ -3866,6 +3928,7 @@
 					opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
 					opp-peak-kBps = <2136719>;
 					qcom,opp-acd-level = <0xc02b5ffd>;
+					opp-supported-hw = <0x1f>;
 				};
 			};
 		};
@@ -5171,6 +5234,107 @@
 			};
 		};
 
+		iris: video-codec@aa00000 {
+			compatible = "qcom,x1e80100-iris", "qcom,sm8550-iris";
+
+			reg = <0 0x0aa00000 0 0xf0000>;
+			interrupts = <GIC_SPI 174 IRQ_TYPE_LEVEL_HIGH>;
+
+			power-domains = <&videocc VIDEO_CC_MVS0C_GDSC>,
+					<&videocc VIDEO_CC_MVS0_GDSC>,
+					<&rpmhpd RPMHPD_MXC>,
+					<&rpmhpd RPMHPD_MMCX>;
+			power-domain-names = "venus",
+					     "vcodec0",
+					     "mxc",
+					     "mmcx";
+			operating-points-v2 = <&iris_opp_table>;
+
+			clocks = <&gcc GCC_VIDEO_AXI0_CLK>,
+				 <&videocc VIDEO_CC_MVS0C_CLK>,
+				 <&videocc VIDEO_CC_MVS0_CLK>;
+			clock-names = "iface",
+				      "core",
+				      "vcodec0_core";
+
+			interconnects = <&gem_noc MASTER_APPSS_PROC QCOM_ICC_TAG_ACTIVE_ONLY
+					 &config_noc SLAVE_VENUS_CFG QCOM_ICC_TAG_ACTIVE_ONLY>,
+					<&mmss_noc MASTER_VIDEO QCOM_ICC_TAG_ALWAYS
+					 &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+			interconnect-names = "cpu-cfg",
+					     "video-mem";
+
+			memory-region = <&video_mem>;
+
+			resets = <&gcc GCC_VIDEO_AXI0_CLK_ARES>;
+			reset-names = "bus";
+
+			iommus = <&apps_smmu 0x1940 0>,
+				 <&apps_smmu 0x1947 0>;
+			dma-coherent;
+
+			/*
+			 * IRIS firmware is signed by vendors, only
+			 * enable on boards where the proper signed firmware
+			 * is available.
+			 */
+			status = "disabled";
+
+			iris_opp_table: opp-table {
+				compatible = "operating-points-v2";
+
+				opp-192000000 {
+					opp-hz = /bits/ 64 <192000000>;
+					required-opps = <&rpmhpd_opp_low_svs_d1>,
+							<&rpmhpd_opp_low_svs_d1>;
+				};
+
+				opp-240000000 {
+					opp-hz = /bits/ 64 <240000000>;
+					required-opps = <&rpmhpd_opp_svs>,
+							<&rpmhpd_opp_low_svs>;
+				};
+
+				opp-338000000 {
+					opp-hz = /bits/ 64 <338000000>;
+					required-opps = <&rpmhpd_opp_svs>,
+							<&rpmhpd_opp_svs>;
+				};
+
+				opp-366000000 {
+					opp-hz = /bits/ 64 <366000000>;
+					required-opps = <&rpmhpd_opp_svs_l1>,
+							<&rpmhpd_opp_svs_l1>;
+				};
+
+				opp-444000000 {
+					opp-hz = /bits/ 64 <444000000>;
+					required-opps = <&rpmhpd_opp_nom>,
+							<&rpmhpd_opp_nom>;
+				};
+
+				opp-481000000 {
+					opp-hz = /bits/ 64 <481000000>;
+					required-opps = <&rpmhpd_opp_turbo>,
+							<&rpmhpd_opp_turbo>;
+				};
+			};
+		};
+
+		videocc: clock-controller@aaf0000 {
+			compatible = "qcom,x1e80100-videocc";
+			reg = <0 0x0aaf0000 0 0x10000>;
+			clocks = <&bi_tcxo_div2>,
+				 <&gcc GCC_VIDEO_AHB_CLK>;
+			power-domains = <&rpmhpd RPMHPD_MMCX>,
+					<&rpmhpd RPMHPD_MXC>;
+			required-opps = <&rpmhpd_opp_low_svs>,
+					<&rpmhpd_opp_low_svs>;
+			#clock-cells = <1>;
+			#reset-cells = <1>;
+			#power-domain-cells = <1>;
+		};
+
 		mdss: display-subsystem@ae00000 {
 			compatible = "qcom,x1e80100-mdss";
 			reg = <0 0x0ae00000 0 0x1000>;
@@ -5312,16 +5476,20 @@
 					 <&dispcc DISP_CC_MDSS_DPTX0_AUX_CLK>,
 					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK>,
 					 <&dispcc DISP_CC_MDSS_DPTX0_LINK_INTF_CLK>,
-					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>;
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK>;
 				clock-names = "core_iface",
 					      "core_aux",
 					      "ctrl_link",
 					      "ctrl_link_iface",
-					      "stream_pixel";
+					      "stream_pixel",
+					      "stream_1_pixel";
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX0_LINK_CLK_SRC>,
-						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>;
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DPTX0_PIXEL1_CLK_SRC>;
 				assigned-clock-parents = <&usb_1_ss0_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 							 <&usb_1_ss0_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 
 				operating-points-v2 = <&mdss_dp0_opp_table>;
@@ -5351,6 +5519,7 @@
 						reg = <1>;
 
 						mdss_dp0_out: endpoint {
+							data-lanes = <0 1 2 3>;
 							remote-endpoint = <&usb_1_ss0_qmpphy_dp_in>;
 						};
 					};
@@ -5395,16 +5564,20 @@
 					 <&dispcc DISP_CC_MDSS_DPTX1_AUX_CLK>,
 					 <&dispcc DISP_CC_MDSS_DPTX1_LINK_CLK>,
 					 <&dispcc DISP_CC_MDSS_DPTX1_LINK_INTF_CLK>,
-					 <&dispcc DISP_CC_MDSS_DPTX1_PIXEL0_CLK>;
+					 <&dispcc DISP_CC_MDSS_DPTX1_PIXEL0_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX1_PIXEL1_CLK>;
 				clock-names = "core_iface",
 					      "core_aux",
 					      "ctrl_link",
 					      "ctrl_link_iface",
-					      "stream_pixel";
+					      "stream_pixel",
+					      "stream_1_pixel";
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX1_LINK_CLK_SRC>,
-						  <&dispcc DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>;
+						  <&dispcc DISP_CC_MDSS_DPTX1_PIXEL0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DPTX1_PIXEL1_CLK_SRC>;
 				assigned-clock-parents = <&usb_1_ss1_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_ss1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 							 <&usb_1_ss1_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 
 				operating-points-v2 = <&mdss_dp1_opp_table>;
@@ -5434,6 +5607,7 @@
 						reg = <1>;
 
 						mdss_dp1_out: endpoint {
+							data-lanes = <0 1 2 3>;
 							remote-endpoint = <&usb_1_ss1_qmpphy_dp_in>;
 						};
 					};
@@ -5478,16 +5652,20 @@
 					 <&dispcc DISP_CC_MDSS_DPTX2_AUX_CLK>,
 					 <&dispcc DISP_CC_MDSS_DPTX2_LINK_CLK>,
 					 <&dispcc DISP_CC_MDSS_DPTX2_LINK_INTF_CLK>,
-					 <&dispcc DISP_CC_MDSS_DPTX2_PIXEL0_CLK>;
+					 <&dispcc DISP_CC_MDSS_DPTX2_PIXEL0_CLK>,
+					 <&dispcc DISP_CC_MDSS_DPTX2_PIXEL1_CLK>;
 				clock-names = "core_iface",
 					      "core_aux",
 					      "ctrl_link",
 					      "ctrl_link_iface",
-					      "stream_pixel";
+					      "stream_pixel",
+					      "stream_1_pixel";
 
 				assigned-clocks = <&dispcc DISP_CC_MDSS_DPTX2_LINK_CLK_SRC>,
-						  <&dispcc DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>;
+						  <&dispcc DISP_CC_MDSS_DPTX2_PIXEL0_CLK_SRC>,
+						  <&dispcc DISP_CC_MDSS_DPTX2_PIXEL1_CLK_SRC>;
 				assigned-clock-parents = <&usb_1_ss2_qmpphy QMP_USB43DP_DP_LINK_CLK>,
+							 <&usb_1_ss2_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>,
 							 <&usb_1_ss2_qmpphy QMP_USB43DP_DP_VCO_DIV_CLK>;
 
 				operating-points-v2 = <&mdss_dp2_opp_table>;
@@ -5516,6 +5694,7 @@
 						reg = <1>;
 
 						mdss_dp2_out: endpoint {
+							data-lanes = <0 1 2 3>;
 							remote-endpoint = <&usb_1_ss2_qmpphy_dp_in>;
 						};
 					};
@@ -5597,6 +5776,9 @@
 
 					port@1 {
 						reg = <1>;
+
+						mdss_dp3_out: endpoint {
+						};
 					};
 				};
 
@@ -5779,6 +5961,12 @@
 			gpio-ranges = <&tlmm 0 0 239>;
 			wakeup-parent = <&pdc>;
 
+			edp0_hpd_default: edp0-hpd-default-state {
+				pins = "gpio119";
+				function = "edp0_hot";
+				bias-disable;
+			};
+
 			qup_i2c0_data_clk: qup-i2c0-data-clk-state {
 				/* SDA, SCL */
 				pins = "gpio0", "gpio1";
@@ -8251,6 +8439,18 @@
 			interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		qfprom: efuse@221c8000 {
+			compatible = "qcom,x1e80100-qfprom", "qcom,qfprom";
+			reg = <0 0x221c8000 0 0x1000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			gpu_speed_bin: gpu-speed-bin@119 {
+				reg = <0x119 0x2>;
+				bits = <7 8>;
+			};
+		};
+
 		pmu@24091000 {
 			compatible = "qcom,x1e80100-llcc-bwmon", "qcom,sc7280-llcc-bwmon";
 			reg = <0 0x24091000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/qcom/x1p42100-crd.dts b/arch/arm64/boot/dts/qcom/x1p42100-crd.dts
index cf07860a63e9..cf999c2cf8d4 100644
--- a/arch/arm64/boot/dts/qcom/x1p42100-crd.dts
+++ b/arch/arm64/boot/dts/qcom/x1p42100-crd.dts
@@ -15,3 +15,7 @@
 	model = "Qualcomm Technologies, Inc. X1P42100 CRD";
 	compatible = "qcom,x1p42100-crd", "qcom,x1p42100";
 };
+
+&gpu_zap_shader {
+	firmware-name = "qcom/x1p42100/gen71500_zap.mbn";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1p42100-hp-omnibook-x14.dts b/arch/arm64/boot/dts/qcom/x1p42100-hp-omnibook-x14.dts
new file mode 100644
index 000000000000..6696cab2de3e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1p42100-hp-omnibook-x14.dts
@@ -0,0 +1,33 @@
+// SPDX-License-Identifier: BSD-3-Clause
+
+/dts-v1/;
+
+#include "x1p42100.dtsi"
+#include "x1e80100-pmics.dtsi"
+#include "x1-hp-omnibook-x14.dtsi"
+/delete-node/ &pmc8380_6;
+/delete-node/ &pmc8380_6_thermal;
+
+/ {
+	model = "HP Omnibook X 14-fe1";
+	compatible = "hp,omnibook-x14-fe1", "qcom,x1p42100";
+	chassis-type = "laptop";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/x1p42100/hp/omnibook-x14/qcdxkmsucpurwa.mbn";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/x1p42100/hp/omnibook-x14/qcadsp8380.mbn",
+			"qcom/x1p42100/hp/omnibook-x14/adsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/x1p42100/hp/omnibook-x14/qccdsp8380.mbn",
+			"qcom/x1p42100/hp/omnibook-x14/cdsp_dtbs.elf";
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1p42100-lenovo-thinkbook-16.dts b/arch/arm64/boot/dts/qcom/x1p42100-lenovo-thinkbook-16.dts
new file mode 100644
index 000000000000..1ac46cdc4386
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/x1p42100-lenovo-thinkbook-16.dts
@@ -0,0 +1,1625 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
+ * Copyright (c) 2024, Linaro Limited
+ * Copyright (c) 2025, Jens Glathe
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "x1p42100.dtsi"
+#include "x1e80100-pmics.dtsi"
+
+/delete-node/ &pmc8380_6;
+/delete-node/ &pmc8380_6_thermal;
+
+/ {
+	model = "Lenovo ThinkBook 16 Gen 7 QOY";
+	compatible = "lenovo,thinkbook-16", "qcom,x1p42100";
+	chassis-type = "laptop";
+
+	aliases {
+		serial0 = &uart21;
+		serial1 = &uart14;
+	};
+
+	wcd938x: audio-codec {
+		compatible = "qcom,wcd9385-codec";
+
+		pinctrl-0 = <&wcd_default>;
+		pinctrl-names = "default";
+
+		qcom,micbias1-microvolt = <1800000>;
+		qcom,micbias2-microvolt = <1800000>;
+		qcom,micbias3-microvolt = <1800000>;
+		qcom,micbias4-microvolt = <1800000>;
+		qcom,mbhc-buttons-vthreshold-microvolt = <75000 150000 237000 500000 500000 500000 500000 500000>;
+		qcom,mbhc-headset-vthreshold-microvolt = <1700000>;
+		qcom,mbhc-headphone-vthreshold-microvolt = <50000>;
+		qcom,rx-device = <&wcd_rx>;
+		qcom,tx-device = <&wcd_tx>;
+
+		reset-gpios = <&tlmm 191 GPIO_ACTIVE_LOW>;
+
+		vdd-buck-supply = <&vreg_l15b_1p8>;
+		vdd-rxtx-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l15b_1p8>;
+		vdd-mic-bias-supply = <&vreg_bob1>;
+
+		#sound-dai-cells = <1>;
+	};
+
+	backlight: backlight {
+		compatible = "pwm-backlight";
+		pwms = <&pm8550_pwm 3 500000>;
+
+		power-supply = <&vreg_edp_bl>;
+	};
+
+	/*
+	 * This is an odd one. The camera is physically behind the eusb9 repeater (confirmed) but
+	 * if it is placed below the usb_2_dwc3 node, it will be switched off after ~30 seconds.
+	 * The reason seems to be that the dwc3 driver does not probe for child nodes when in
+	 * host-only mode. But that's the default setting for the xhci controllers due to issues
+	 * when in OTG mode. https://lore.kernel.org/all/20241210111444.26240-1-johan+linaro@kernel.org/
+	 * The whole reason it is described in the dt (as an USB device) is its requirement for
+	 * that additional regulator, and to get power management to switch it off when suspended.
+	 * Defining it stand-alone does work.
+	 */
+	camera {
+		compatible = "usb5986,1198";
+
+		vdd-supply = <&vreg_cam_5p0>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		pinctrl-0 = <&hall_int_n_default>;
+		pinctrl-names = "default";
+
+		switch-lid {
+			gpios = <&tlmm 92 GPIO_ACTIVE_LOW>;
+			linux,input-type = <EV_SW>;
+			linux,code = <SW_LID>;
+			wakeup-source;
+			wakeup-event-action = <EV_ACT_DEASSERTED>;
+		};
+	};
+
+	pmic-glink {
+		compatible = "qcom,x1e80100-pmic-glink",
+			     "qcom,sm8550-pmic-glink",
+			     "qcom,pmic-glink";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		orientation-gpios = <&tlmm 121 GPIO_ACTIVE_HIGH>,
+				    <&tlmm 123 GPIO_ACTIVE_HIGH>;
+
+		/* Display-adjacent port */
+		connector@0 {
+			compatible = "usb-c-connector";
+			reg = <0>;
+			power-role = "dual";
+			data-role = "host";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss0_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss0_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss0_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss0_sbu: endpoint {
+						remote-endpoint = <&usb_1_ss0_sbu_mux>;
+					};
+				};
+			};
+		};
+
+		/* User-adjacent port */
+		connector@1 {
+			compatible = "usb-c-connector";
+			reg = <1>;
+			power-role = "dual";
+			data-role = "host";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					pmic_glink_ss1_hs_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_dwc3_hs>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					pmic_glink_ss1_ss_in: endpoint {
+						remote-endpoint = <&usb_1_ss1_qmpphy_out>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					pmic_glink_ss1_sbu: endpoint {
+						remote-endpoint = <&usb_1_ss1_sbu_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	sound {
+		compatible = "qcom,x1e80100-sndcard";
+		model = "X1E80100-LENOVO-ThinkBook-16";
+		audio-routing = "SpkrLeft IN", "WSA WSA_SPK1 OUT",
+				"SpkrRight IN", "WSA WSA_SPK2 OUT",
+				"IN1_HPHL", "HPHL_OUT",
+				"IN2_HPHR", "HPHR_OUT",
+				"AMIC2", "MIC BIAS2",
+				"VA DMIC0", "MIC BIAS3",
+				"VA DMIC1", "MIC BIAS3",
+				"VA DMIC2", "MIC BIAS1",
+				"VA DMIC3", "MIC BIAS1",
+				"TX SWR_INPUT1", "ADC2_OUTPUT";
+
+		wcd-playback-dai-link {
+			link-name = "WCD Playback";
+
+			codec {
+				sound-dai = <&wcd938x 0>, <&swr1 0>, <&lpass_rxmacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai RX_CODEC_DMA_RX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wcd-capture-dai-link {
+			link-name = "WCD Capture";
+
+			codec {
+				sound-dai = <&wcd938x 1>, <&swr2 1>, <&lpass_txmacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai TX_CODEC_DMA_TX_3>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		wsa-dai-link {
+			link-name = "WSA Playback";
+
+			codec {
+				sound-dai = <&left_spkr>, <&right_spkr>, <&swr0 0>, <&lpass_wsamacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai WSA_CODEC_DMA_RX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+
+		va-dai-link {
+			link-name = "VA Capture";
+
+			codec {
+				sound-dai = <&lpass_vamacro 0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai VA_CODEC_DMA_TX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
+	};
+
+	usb-1-ss0-sbu-mux {
+		compatible = "onnn,fsusb42", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 167 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 168 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&usb_1_ss0_sbu_default>;
+		pinctrl-names = "default";
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usb_1_ss0_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_ss0_sbu>;
+			};
+		};
+	};
+
+	usb-1-ss1-sbu-mux {
+		compatible = "onnn,fsusb42", "gpio-sbu-mux";
+
+		enable-gpios = <&tlmm 178 GPIO_ACTIVE_LOW>;
+		select-gpios = <&tlmm 179 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&usb_1_ss1_sbu_default>;
+		pinctrl-names = "default";
+
+		mode-switch;
+		orientation-switch;
+
+		port {
+			usb_1_ss1_sbu_mux: endpoint {
+				remote-endpoint = <&pmic_glink_ss1_sbu>;
+			};
+		};
+	};
+
+	vreg_cam_5p0: regulator-cam-5p0 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_CAM_5P0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&tlmm 44 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&cam_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_edp_3p3: regulator-edp-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_EDP_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 70 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_edp_bl: regulator-edp-bl {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VBL9";
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+
+		gpio = <&pmc8380_3_gpios 10 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&edp_bl_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_misc_3p3: regulator-misc-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_MISC_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&pm8550ve_8_gpios 6 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&misc_3p3_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vreg_nvme: regulator-nvme {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_NVME_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 18 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&nvme_reg_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vreg_wcn_0p95: regulator-wcn-0p95 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_0P95";
+		regulator-min-microvolt = <950000>;
+		regulator-max-microvolt = <950000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_1p9: regulator-wcn-1p9 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_1P9";
+		regulator-min-microvolt = <1900000>;
+		regulator-max-microvolt = <1900000>;
+
+		vin-supply = <&vreg_wcn_3p3>;
+	};
+
+	vreg_wcn_3p3: regulator-wcn-3p3 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "VREG_WCN_3P3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&tlmm 214 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+
+		pinctrl-0 = <&wcn_sw_en>;
+		pinctrl-names = "default";
+
+		regulator-boot-on;
+	};
+
+	vph_pwr: regulator-vph-pwr {
+		compatible = "regulator-fixed";
+
+		regulator-name = "vph_pwr";
+		regulator-min-microvolt = <3700000>;
+		regulator-max-microvolt = <3700000>;
+
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	wcn7850-pmu {
+		compatible = "qcom,wcn7850-pmu";
+
+		vdd-supply = <&vreg_wcn_0p95>;
+		vddio-supply = <&vreg_l15b_1p8>;
+		vddaon-supply = <&vreg_wcn_0p95>;
+		vdddig-supply = <&vreg_wcn_0p95>;
+		vddrfa1p2-supply = <&vreg_wcn_1p9>;
+		vddrfa1p8-supply = <&vreg_wcn_1p9>;
+
+		wlan-enable-gpios = <&tlmm 117 GPIO_ACTIVE_HIGH>;
+		bt-enable-gpios = <&tlmm 116 GPIO_ACTIVE_HIGH>;
+
+		pinctrl-0 = <&wcn_wlan_bt_en>;
+		pinctrl-names = "default";
+
+		regulators {
+			vreg_pmu_rfa_cmn: ldo0 {
+				regulator-name = "vreg_pmu_rfa_cmn";
+			};
+
+			vreg_pmu_aon_0p59: ldo1 {
+				regulator-name = "vreg_pmu_aon_0p59";
+			};
+
+			vreg_pmu_wlcx_0p8: ldo2 {
+				regulator-name = "vreg_pmu_wlcx_0p8";
+			};
+
+			vreg_pmu_wlmx_0p85: ldo3 {
+				regulator-name = "vreg_pmu_wlmx_0p85";
+			};
+
+			vreg_pmu_btcmx_0p85: ldo4 {
+				regulator-name = "vreg_pmu_btcmx_0p85";
+			};
+
+			vreg_pmu_rfa_0p8: ldo5 {
+				regulator-name = "vreg_pmu_rfa_0p8";
+			};
+
+			vreg_pmu_rfa_1p2: ldo6 {
+				regulator-name = "vreg_pmu_rfa_1p2";
+			};
+
+			vreg_pmu_rfa_1p8: ldo7 {
+				regulator-name = "vreg_pmu_rfa_1p8";
+			};
+
+			vreg_pmu_pcie_0p9: ldo8 {
+				regulator-name = "vreg_pmu_pcie_0p9";
+			};
+
+			vreg_pmu_pcie_1p8: ldo9 {
+				regulator-name = "vreg_pmu_pcie_1p8";
+			};
+		};
+	};
+};
+
+&apps_rsc {
+	regulators-0 {
+		compatible = "qcom,pm8550-rpmh-regulators";
+		qcom,pmic-id = "b";
+
+		vdd-bob1-supply = <&vph_pwr>;
+		vdd-bob2-supply = <&vph_pwr>;
+		vdd-l1-l4-l10-supply = <&vreg_s4c_1p8>;
+		vdd-l2-l13-l14-supply = <&vreg_bob1>;
+		vdd-l5-l16-supply = <&vreg_bob1>;
+		vdd-l6-l7-supply = <&vreg_bob2>;
+		vdd-l8-l9-supply = <&vreg_bob1>;
+		vdd-l12-supply = <&vreg_s5j_1p2>;
+		vdd-l15-supply = <&vreg_s4c_1p8>;
+		vdd-l17-supply = <&vreg_bob2>;
+
+		vreg_bob1: bob1 {
+			regulator-name = "vreg_bob1";
+			regulator-min-microvolt = <3008000>;
+			regulator-max-microvolt = <3960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_bob2: bob2 {
+			regulator-name = "vreg_bob2";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <3008000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1b_1p8: ldo1 {
+			regulator-name = "vreg_l1b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2b_3p0: ldo2 {
+			regulator-name = "vreg_l2b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l4b_1p8: ldo4 {
+			regulator-name = "vreg_l4b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l5b_3p0: ldo5 {
+			regulator-name = "vreg_l5b_3p0";
+			regulator-min-microvolt = <3000000>;
+			regulator-max-microvolt = <3000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l6b_1p8: ldo6 {
+			regulator-name = "vreg_l6b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l7b_2p8: ldo7 {
+			regulator-name = "vreg_l7b_2p8";
+			regulator-min-microvolt = <2800000>;
+			regulator-max-microvolt = <2800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l8b_3p0: ldo8 {
+			regulator-name = "vreg_l8b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l9b_2p9: ldo9 {
+			regulator-name = "vreg_l9b_2p9";
+			regulator-min-microvolt = <2960000>;
+			regulator-max-microvolt = <2960000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l10b_1p8: ldo10 {
+			regulator-name = "vreg_l10b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l12b_1p2: ldo12 {
+			regulator-name = "vreg_l12b_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l13b_3p0: ldo13 {
+			regulator-name = "vreg_l13b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l14b_3p0: ldo14 {
+			regulator-name = "vreg_l14b_3p0";
+			regulator-min-microvolt = <3072000>;
+			regulator-max-microvolt = <3072000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l15b_1p8: ldo15 {
+			regulator-name = "vreg_l15b_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l16b_2p9: ldo16 {
+			regulator-name = "vreg_l16b_2p9";
+			regulator-min-microvolt = <2912000>;
+			regulator-max-microvolt = <2912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l17b_2p5: ldo17 {
+			regulator-name = "vreg_l17b_2p5";
+			regulator-min-microvolt = <2504000>;
+			regulator-max-microvolt = <2504000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-1 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "c";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s4-supply = <&vph_pwr>;
+
+		vreg_s4c_1p8: smps4 {
+			regulator-name = "vreg_s4c_1p8";
+			regulator-min-microvolt = <1856000>;
+			regulator-max-microvolt = <2000000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1c_1p2: ldo1 {
+			regulator-name = "vreg_l1c_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2c_0p8: ldo2 {
+			regulator-name = "vreg_l2c_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3c_0p8: ldo3 {
+			regulator-name = "vreg_l3c_0p8";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-2 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "d";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s4c_1p8>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_l1d_0p8: ldo1 {
+			regulator-name = "vreg_l1d_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2d_0p9: ldo2 {
+			regulator-name = "vreg_l2d_0p9";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3d_1p8: ldo3 {
+			regulator-name = "vreg_l3d_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-3 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "e";
+
+		vdd-l2-supply = <&vreg_s1f_0p7>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+
+		vreg_l2e_0p8: ldo2 {
+			regulator-name = "vreg_l2e_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3e_1p2: ldo3 {
+			regulator-name = "vreg_l3e_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-4 {
+		compatible = "qcom,pmc8380-rpmh-regulators";
+		qcom,pmic-id = "f";
+
+		vdd-l1-supply = <&vreg_s5j_1p2>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s5j_1p2>;
+		vdd-s1-supply = <&vph_pwr>;
+
+		vreg_s1f_0p7: smps1 {
+			regulator-name = "vreg_s1f_0p7";
+			regulator-min-microvolt = <700000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1f_1p0: ldo1 {
+			regulator-name = "vreg_l1f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2f_1p0: ldo2 {
+			regulator-name = "vreg_l2f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3f_1p0: ldo3 {
+			regulator-name = "vreg_l3f_1p0";
+			regulator-min-microvolt = <1024000>;
+			regulator-max-microvolt = <1024000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-6 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "i";
+
+		vdd-l1-supply = <&vreg_s4c_1p8>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s1-supply = <&vph_pwr>;
+		vdd-s2-supply = <&vph_pwr>;
+
+		vreg_l1i_1p8: ldo1 {
+			regulator-name = "vreg_l1i_1p8";
+			regulator-min-microvolt = <1800000>;
+			regulator-max-microvolt = <1800000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+			regulator-always-on;
+		};
+
+		vreg_l2i_1p2: ldo2 {
+			regulator-name = "vreg_l2i_1p2";
+			regulator-min-microvolt = <1200000>;
+			regulator-max-microvolt = <1200000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3i_0p8: ldo3 {
+			regulator-name = "vreg_l3i_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s1i_0p9: smps1 {
+			regulator-name = "vreg_s1i_0p9";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <920000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_s2i_1p0: smps2 {
+			regulator-name = "vreg_s2i_1p0";
+			regulator-min-microvolt = <1000000>;
+			regulator-max-microvolt = <1100000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+
+	regulators-7 {
+		compatible = "qcom,pm8550ve-rpmh-regulators";
+		qcom,pmic-id = "j";
+
+		vdd-l1-supply = <&vreg_s1f_0p7>;
+		vdd-l2-supply = <&vreg_s5j_1p2>;
+		vdd-l3-supply = <&vreg_s1f_0p7>;
+		vdd-s5-supply = <&vph_pwr>;
+
+		vreg_s5j_1p2: smps5 {
+			regulator-name = "vreg_s5j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1304000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l1j_0p8: ldo1 {
+			regulator-name = "vreg_l1j_0p8";
+			regulator-min-microvolt = <912000>;
+			regulator-max-microvolt = <912000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l2j_1p2: ldo2 {
+			regulator-name = "vreg_l2j_1p2";
+			regulator-min-microvolt = <1256000>;
+			regulator-max-microvolt = <1256000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+
+		vreg_l3j_0p8: ldo3 {
+			regulator-name = "vreg_l3j_0p8";
+			regulator-min-microvolt = <880000>;
+			regulator-max-microvolt = <880000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+		};
+	};
+};
+
+&gpu {
+	status = "okay";
+};
+
+&gpu_zap_shader {
+	firmware-name = "qcom/x1p42100/LENOVO/21NH/qcdxkmsucpurwa.mbn";
+};
+
+&i2c2 {
+	clock-frequency = <400000>;
+
+	pinctrl-0 = <&qup_i2c2_data_clk>, <&tpad_default>, <&kybd_default>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	/* ELAN06FA */
+	touchpad@15 {
+		compatible = "hid-over-i2c";
+		reg = <0x15>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l12b_1p2>;
+
+		wakeup-source;
+	};
+
+	/* CIRQ1080 or SYNA2BA6 */
+	touchpad@2c {
+		compatible = "hid-over-i2c";
+		reg = <0x2c>;
+
+		hid-descr-addr = <0x20>;
+		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l12b_1p2>;
+
+		wakeup-source;
+	};
+
+	/* FTCS0038 */
+	touchpad@38 {
+		compatible = "hid-over-i2c";
+		reg = <0x38>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l12b_1p2>;
+
+		wakeup-source;
+	};
+
+	keyboard@3a {
+		compatible = "hid-over-i2c";
+		reg = <0x3a>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 67 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l12b_1p2>;
+
+		wakeup-source;
+	};
+
+	/* GXTP5100 */
+	touchpad@5d {
+		compatible = "hid-over-i2c";
+		reg = <0x5d>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 3 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l12b_1p2>;
+
+		wakeup-source;
+	};
+};
+
+&i2c5 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	eusb5_repeater: redriver@43 {
+		compatible = "nxp,ptn3222";
+		reg = <0x43>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+	};
+
+	eusb3_repeater: redriver@47 {
+		compatible = "nxp,ptn3222";
+		reg = <0x47>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 6 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb3_reset_n>;
+		pinctrl-names = "default";
+	};
+
+	eusb9_repeater: redriver@4b {
+		compatible = "nxp,ptn3222";
+		reg = <0x4b>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 7 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb9_reset_n>;
+		pinctrl-names = "default";
+	};
+
+	eusb6_repeater: redriver@4f {
+		compatible = "nxp,ptn3222";
+		reg = <0x4f>;
+		#phy-cells = <0>;
+
+		vdd3v3-supply = <&vreg_l13b_3p0>;
+		vdd1v8-supply = <&vreg_l4b_1p8>;
+
+		reset-gpios = <&tlmm 184 GPIO_ACTIVE_LOW>;
+
+		pinctrl-0 = <&eusb6_reset_n>;
+		pinctrl-names = "default";
+	};
+};
+
+&i2c8 {
+	clock-frequency = <400000>;
+
+	status = "okay";
+
+	/* ILIT2911 or GTCH1563 */
+	touchscreen@10 {
+		compatible = "hid-over-i2c";
+		reg = <0x10>;
+
+		hid-descr-addr = <0x1>;
+		interrupts-extended = <&tlmm 51 IRQ_TYPE_LEVEL_LOW>;
+
+		vdd-supply = <&vreg_misc_3p3>;
+		vddl-supply = <&vreg_l15b_1p8>;
+
+		pinctrl-0 = <&ts0_default>;
+		pinctrl-names = "default";
+	};
+};
+
+&lpass_tlmm {
+	spkr_01_sd_n_active: spkr-01-sd-n-active-state {
+		pins = "gpio12";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+};
+
+&lpass_vamacro {
+	pinctrl-0 = <&dmic01_default>, <&dmic23_default>;
+	pinctrl-names = "default";
+
+	vdd-micb-supply = <&vreg_l1b_1p8>;
+	qcom,dmic-sample-rate = <4800000>;
+};
+
+&mdss {
+	status = "okay";
+};
+
+&mdss_dp0 {
+	status = "okay";
+};
+
+&mdss_dp0_out {
+	data-lanes = <0 1>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp1 {
+	status = "okay";
+};
+
+&mdss_dp1_out {
+	data-lanes = <0 1>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+};
+
+&mdss_dp3 {
+	/delete-property/ #sound-dai-cells;
+
+	pinctrl-0 = <&edp_hpd_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+
+	aux-bus {
+		panel {
+			compatible = "edp-panel";
+
+			backlight = <&backlight>;
+
+			enable-gpios = <&pmc8380_3_gpios 4 GPIO_ACTIVE_HIGH>;
+			pinctrl-0 = <&edp_bl_en>;
+			pinctrl-names = "default";
+
+			power-supply = <&vreg_edp_3p3>;
+
+			port {
+				edp_panel_in: endpoint {
+					remote-endpoint = <&mdss_dp3_out>;
+				};
+			};
+		};
+	};
+};
+
+&mdss_dp3_out {
+	data-lanes = <0 1 2 3>;
+	link-frequencies = /bits/ 64 <1620000000 2700000000 5400000000 8100000000>;
+
+	remote-endpoint = <&edp_panel_in>;
+};
+
+&mdss_dp3_phy {
+	vdda-phy-supply = <&vreg_l3j_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pcie4 {
+	perst-gpios = <&tlmm 146 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 148 GPIO_ACTIVE_LOW>;
+
+	pinctrl-0 = <&pcie4_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie4_phy {
+	vdda-phy-supply = <&vreg_l3i_0p8>;
+	vdda-pll-supply = <&vreg_l3e_1p2>;
+
+	status = "okay";
+};
+
+&pcie4_port0 {
+	wifi@0 {
+		compatible = "pci17cb,1107";
+		reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+		vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+		vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+	};
+};
+
+&pcie6a {
+	perst-gpios = <&tlmm 152 GPIO_ACTIVE_LOW>;
+	wake-gpios = <&tlmm 154 GPIO_ACTIVE_LOW>;
+
+	vddpe-3v3-supply = <&vreg_nvme>;
+
+	pinctrl-0 = <&pcie6a_default>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&pcie6a_phy {
+	vdda-phy-supply = <&vreg_l1d_0p8>;
+	vdda-pll-supply = <&vreg_l2j_1p2>;
+
+	status = "okay";
+};
+
+&pm8550_pwm {
+	status = "okay";
+};
+
+&pm8550ve_8_gpios {
+	misc_3p3_reg_en: misc-3p3-reg-en-state {
+		pins = "gpio6";
+		function = "normal";
+		bias-disable;
+		input-disable;
+		output-enable;
+		drive-push-pull;
+		power-source = <1>; /* 1.8 V */
+		qcom,drive-strength = <PMIC_GPIO_STRENGTH_LOW>;
+	};
+};
+
+&pmc8380_3_gpios {
+	edp_bl_en: edp-bl-en-state {
+		pins = "gpio4";
+		function = "normal";
+		power-source = <1>; /* 1.8V */
+		input-disable;
+		output-enable;
+	};
+
+	edp_bl_reg_en: edp-bl-reg-en-state {
+		pins = "gpio10";
+		function = "normal";
+	};
+};
+
+&qupv3_0 {
+	status = "okay";
+};
+
+&qupv3_1 {
+	status = "okay";
+};
+
+&qupv3_2 {
+	status = "okay";
+};
+
+&remoteproc_adsp {
+	firmware-name = "qcom/x1p42100/LENOVO/21NH/qcadsp8380.mbn",
+			"qcom/x1p42100/LENOVO/21NH/adsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&remoteproc_cdsp {
+	firmware-name = "qcom/x1p42100/LENOVO/21NH/qccdsp8380.mbn",
+			"qcom/x1p42100/LENOVO/21NH/cdsp_dtbs.elf";
+
+	status = "okay";
+};
+
+&sdhc_2 {
+	cd-gpios = <&tlmm 71 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&sdc2_default &sdc2_card_det_n>;
+	pinctrl-1 = <&sdc2_sleep &sdc2_card_det_n>;
+	pinctrl-names = "default", "sleep";
+	vmmc-supply = <&vreg_l9b_2p9>;
+	vqmmc-supply = <&vreg_l6b_1p8>;
+	status = "okay";
+};
+
+&smb2360_0 {
+	status = "okay";
+};
+
+&smb2360_0_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l2b_3p0>;
+};
+
+&smb2360_1 {
+	status = "okay";
+};
+
+&smb2360_1_eusb2_repeater {
+	vdd18-supply = <&vreg_l3d_1p8>;
+	vdd3-supply = <&vreg_l14b_3p0>;
+};
+
+&swr0 {
+	status = "okay";
+
+	pinctrl-0 = <&wsa_swr_active>, <&spkr_01_sd_n_active>;
+	pinctrl-names = "default";
+
+	/* WSA8845, Left Speaker */
+	left_spkr: speaker@0,0 {
+		compatible = "sdw20217020400";
+		reg = <0 0>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrLeft";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <1 2 3 7 10 13>;
+	};
+
+	/* WSA8845, Right Speaker */
+	right_spkr: speaker@0,1 {
+		compatible = "sdw20217020400";
+		reg = <0 1>;
+		reset-gpios = <&lpass_tlmm 12 GPIO_ACTIVE_LOW>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "SpkrRight";
+		vdd-1p8-supply = <&vreg_l15b_1p8>;
+		vdd-io-supply = <&vreg_l12b_1p2>;
+		qcom,port-mapping = <4 5 6 7 11 13>;
+	};
+};
+
+&swr1 {
+	status = "okay";
+
+	/* WCD9385 RX */
+	wcd_rx: codec@0,4 {
+		compatible = "sdw20217010d00";
+		reg = <0 4>;
+		qcom,rx-port-mapping = <1 2 3 4 5>;
+	};
+};
+
+&swr2 {
+	status = "okay";
+
+	/* WCD9385 TX */
+	wcd_tx: codec@0,3 {
+		compatible = "sdw20217010d00";
+		reg = <0 3>;
+		qcom,tx-port-mapping = <2 2 3 4>;
+	};
+};
+
+&tlmm {
+	gpio-reserved-ranges = <34 2>, /* Unused */
+			       <72 2>; /* Secure EC I2C connection (?) */
+
+	edp_hpd_default: edp-hpd-default-state {
+		pins = "gpio119";
+		function = "edp0_hot";
+		bias-disable;
+	};
+
+	cam_reg_en: cam-reg-en-state {
+		pins = "gpio44";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	eusb3_reset_n: eusb3-reset-n-state {
+		pins = "gpio6";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	eusb6_reset_n: eusb6-reset-n-state {
+		pins = "gpio184";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	eusb9_reset_n: eusb9-reset-n-state {
+		pins = "gpio7";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+		output-low;
+	};
+
+	edp_reg_en: edp-reg-en-state {
+		pins = "gpio70";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+	};
+
+	hall_int_n_default: hall-int-n-state {
+		pins = "gpio92";
+		function = "gpio";
+		bias-disable;
+	};
+
+	kybd_default: kybd-default-state {
+		pins = "gpio67";
+		function = "gpio";
+		bias-disable;
+	};
+
+	nvme_reg_en: nvme-reg-en-state {
+		pins = "gpio18";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	pcie4_default: pcie4-default-state {
+		clkreq-n-pins {
+			pins = "gpio147";
+			function = "pcie4_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio146";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio148";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	pcie6a_default: pcie6a-default-state {
+		clkreq-n-pins {
+			pins = "gpio153";
+			function = "pcie6a_clk";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		perst-n-pins {
+			pins = "gpio152";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		wake-n-pins {
+			pins = "gpio154";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	sdc2_card_det_n: sdc2-card-det-state {
+		pins = "gpio71";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-pull-up;
+	};
+
+	tpad_default: tpad-default-state {
+		pins = "gpio3";
+		function = "gpio";
+		bias-pull-up;
+	};
+
+	ts0_default: ts0-default-state {
+		int-n-pins {
+			pins = "gpio51";
+			function = "gpio";
+			bias-disable;
+		};
+
+		reset-n-pins {
+			pins = "gpio48";
+			function = "gpio";
+			output-high;
+			drive-strength = <16>;
+		};
+	};
+
+	usb_1_ss0_sbu_default: usb-1-ss0-sbu-state {
+		oe-n-pins {
+			pins = "gpio167";
+			function = "gpio";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		sel-pins {
+			pins = "gpio168";
+			function = "gpio";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+	};
+
+	usb_1_ss1_sbu_default: usb-1-ss1-sbu-state {
+		oe-n-pins {
+			pins = "gpio178";
+			function = "gpio";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+
+		sel-pins {
+			pins = "gpio179";
+			function = "gpio";
+			bias-pull-up;
+			drive-strength = <2>;
+		};
+	};
+
+	wcd_default: wcd-reset-n-active-state {
+		pins = "gpio191";
+		function = "gpio";
+		drive-strength = <16>;
+		bias-disable;
+		output-low;
+	};
+
+	wcn_sw_en: wcn-sw-en-state {
+		pins = "gpio214";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+
+	wcn_wlan_bt_en: wcn-wlan-bt-en-state {
+		pins = "gpio116", "gpio117";
+		function = "gpio";
+		drive-strength = <2>;
+		bias-disable;
+	};
+};
+
+&uart14 {
+	status = "okay";
+
+	bluetooth {
+		compatible = "qcom,wcn7850-bt";
+		max-speed = <3200000>;
+
+		vddaon-supply = <&vreg_pmu_aon_0p59>;
+		vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+		vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+		vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+		vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+		vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+		vddrfa1p8-supply = <&vreg_pmu_rfa_1p8>;
+	};
+};
+
+&usb_1_ss0_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_0_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss0_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l1j_0p8>;
+
+	status = "okay";
+};
+
+&usb_1_ss0 {
+	status = "okay";
+};
+
+&usb_1_ss0_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss0_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss0_hs_in>;
+};
+
+&usb_1_ss0_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss0_ss_in>;
+};
+
+&usb_1_ss1_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&smb2360_1_eusb2_repeater>;
+
+	status = "okay";
+};
+
+&usb_1_ss1_qmpphy {
+	vdda-phy-supply = <&vreg_l2j_1p2>;
+	vdda-pll-supply = <&vreg_l2d_0p9>;
+
+	status = "okay";
+};
+
+&usb_1_ss1 {
+	status = "okay";
+};
+
+&usb_1_ss1_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_1_ss1_dwc3_hs {
+	remote-endpoint = <&pmic_glink_ss1_hs_in>;
+};
+
+&usb_1_ss1_qmpphy_out {
+	remote-endpoint = <&pmic_glink_ss1_ss_in>;
+};
+
+&usb_1_ss2 {
+	status = "okay";
+};
+
+&usb_1_ss2_dwc3 {
+	dr_mode = "host";
+	maximum-speed = "high-speed";
+	phys = <&usb_1_ss2_hsphy>;
+	phy-names = "usb2-phy";
+};
+
+&usb_1_ss2_hsphy {
+	vdd-supply = <&vreg_l3j_0p8>;
+	vdda12-supply = <&vreg_l2j_1p2>;
+
+	phys = <&eusb5_repeater>;
+
+	status = "okay";
+};
+
+&usb_2 {
+	status = "okay";
+};
+
+&usb_2_dwc3 {
+	dr_mode = "host";
+};
+
+&usb_2_hsphy {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb9_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp {
+	status = "okay";
+};
+
+&usb_mp_hsphy0 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb6_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy0 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
+
+&usb_mp_hsphy1 {
+	vdd-supply = <&vreg_l2e_0p8>;
+	vdda12-supply = <&vreg_l3e_1p2>;
+
+	phys = <&eusb3_repeater>;
+
+	status = "okay";
+};
+
+&usb_mp_qmpphy1 {
+	vdda-phy-supply = <&vreg_l3e_1p2>;
+	vdda-pll-supply = <&vreg_l3c_0p8>;
+
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/qcom/x1p42100.dtsi b/arch/arm64/boot/dts/qcom/x1p42100.dtsi
index 9af9e707f982..10d26958d3c6 100644
--- a/arch/arm64/boot/dts/qcom/x1p42100.dtsi
+++ b/arch/arm64/boot/dts/qcom/x1p42100.dtsi
@@ -17,6 +17,8 @@
 /delete-node/ &cpu_pd9;
 /delete-node/ &cpu_pd10;
 /delete-node/ &cpu_pd11;
+/delete-node/ &gpu_opp_table;
+/delete-node/ &gpu_speed_bin;
 /delete-node/ &pcie3_phy;
 /delete-node/ &thermal_zones;
 
@@ -24,9 +26,117 @@
 	compatible = "qcom,x1p42100-gcc", "qcom,x1e80100-gcc";
 };
 
-/* The GPU is physically different and will be brought up later */
+&gmu {
+	compatible = "qcom,adreno-gmu-x145.0", "qcom,adreno-gmu";
+};
+
 &gpu {
-	/delete-property/ compatible;
+	compatible = "qcom,adreno-43030c00", "qcom,adreno";
+
+	nvmem-cells = <&gpu_speed_bin>;
+	nvmem-cell-names = "speed_bin";
+
+	gpu_opp_table: opp-table {
+		compatible = "operating-points-v2-adreno", "operating-points-v2";
+
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L4>;
+			opp-peak-kBps = <16500000>;
+			qcom,opp-acd-level = <0xa8295ffd>;
+			opp-supported-hw = <0x3>;
+		};
+
+		opp-1250000000 {
+			opp-hz = /bits/ 64 <1250000000>;
+			opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L3>;
+			opp-peak-kBps = <16500000>;
+			qcom,opp-acd-level = <0x882a5ffd>;
+			opp-supported-hw = <0x7>;
+		};
+
+		opp-1107000000 {
+			opp-hz = /bits/ 64 <1107000000>;
+			opp-level = <RPMH_REGULATOR_LEVEL_TURBO_L1>;
+			opp-peak-kBps = <16500000>;
+			qcom,opp-acd-level = <0x882a5ffd>;
+			opp-supported-hw = <0xf>;
+		};
+
+		opp-1014000000 {
+			opp-hz = /bits/ 64 <1014000000>;
+			opp-level = <RPMH_REGULATOR_LEVEL_TURBO>;
+			opp-peak-kBps = <14398438>;
+			qcom,opp-acd-level = <0xa82a5ffd>;
+			opp-supported-hw = <0xf>;
+		};
+
+		opp-940000000 {
+			opp-hz = /bits/ 64 <940000000>;
+			opp-level = <RPMH_REGULATOR_LEVEL_NOM_L1>;
+			opp-peak-kBps = <14398438>;
+			qcom,opp-acd-level = <0xa82a5ffd>;
+			opp-supported-hw = <0xf>;
+		};
+
+		opp-825000000 {
+			opp-hz = /bits/ 64 <825000000>;
+			opp-level = <RPMH_REGULATOR_LEVEL_NOM>;
+			opp-peak-kBps = <12449219>;
+			qcom,opp-acd-level = <0x882b5ffd>;
+			opp-supported-hw = <0xf>;
+		};
+
+		opp-720000000 {
+			opp-hz = /bits/ 64 <720000000>;
+			opp-level = <RPMH_REGULATOR_LEVEL_SVS_L2>;
+			opp-peak-kBps = <10687500>;
+			qcom,opp-acd-level = <0xa82c5ffd>;
+			opp-supported-hw = <0xf>;
+		};
+
+		opp-666000000-0 {
+			opp-hz = /bits/ 64 <666000000>;
+			opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+			opp-peak-kBps = <8171875>;
+			qcom,opp-acd-level = <0xa82d5ffd>;
+			opp-supported-hw = <0xf>;
+		};
+
+		/* Only applicable for SKUs which has 666Mhz as Fmax */
+		opp-666000000-1 {
+			opp-hz = /bits/ 64 <666000000>;
+			opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+			opp-peak-kBps = <16500000>;
+			qcom,opp-acd-level = <0xa82d5ffd>;
+			opp-supported-hw = <0x10>;
+		};
+
+		opp-550000000 {
+			opp-hz = /bits/ 64 <550000000>;
+			opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+			opp-peak-kBps = <6074219>;
+			qcom,opp-acd-level = <0x882e5ffd>;
+			opp-supported-hw = <0x1f>;
+		};
+
+		opp-380000000 {
+			opp-hz = /bits/ 64 <380000000>;
+			opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+			opp-peak-kBps = <3000000>;
+			qcom,opp-acd-level = <0xc82f5ffd>;
+			opp-supported-hw = <0x1f>;
+		};
+
+		opp-280000000 {
+			opp-hz = /bits/ 64 <280000000>;
+			opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS_D1>;
+			opp-peak-kBps = <2136719>;
+			qcom,opp-acd-level = <0xc82f5ffd>;
+			opp-supported-hw = <0x1f>;
+		};
+	};
+
 };
 
 &gpucc {
@@ -42,6 +152,13 @@
 	compatible = "qcom,x1p42100-qmp-gen4x4-pcie-phy";
 };
 
+&qfprom {
+	gpu_speed_bin: gpu-speed-bin@119 {
+		reg = <0x119 0x2>;
+		bits = <7 9>;
+	};
+};
+
 &soc {
 	/* The PCIe3 PHY on X1P42100 uses a different IP block */
 	pcie3_phy: phy@1bd4000 {
diff --git a/arch/arm64/boot/dts/renesas/Makefile b/arch/arm64/boot/dts/renesas/Makefile
index 6093d5f6e548..ccdf7aaeca13 100644
--- a/arch/arm64/boot/dts/renesas/Makefile
+++ b/arch/arm64/boot/dts/renesas/Makefile
@@ -96,6 +96,18 @@ dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g2-white-hawk-single-ard-audio-da7212.dtb
 
 DTC_FLAGS_r8a779g3-sparrow-hawk += -Wno-spi_bus_bridge
 dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk.dtb
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-camera-j1-imx219.dtbo
+r8a779g3-sparrow-hawk-camera-j1-imx219-dtbs := r8a779g3-sparrow-hawk.dtb r8a779g3-sparrow-hawk-camera-j1-imx219.dtbo
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-camera-j1-imx219.dtb
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-camera-j1-imx462.dtbo
+r8a779g3-sparrow-hawk-camera-j1-imx462-dtbs := r8a779g3-sparrow-hawk.dtb r8a779g3-sparrow-hawk-camera-j1-imx462.dtbo
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-camera-j1-imx462.dtb
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-camera-j2-imx219.dtbo
+r8a779g3-sparrow-hawk-camera-j2-imx219-dtbs := r8a779g3-sparrow-hawk.dtb r8a779g3-sparrow-hawk-camera-j2-imx219.dtbo
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-camera-j2-imx219.dtb
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-camera-j2-imx462.dtbo
+r8a779g3-sparrow-hawk-camera-j2-imx462-dtbs := r8a779g3-sparrow-hawk.dtb r8a779g3-sparrow-hawk-camera-j2-imx462.dtbo
+dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-camera-j2-imx462.dtb
 dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-fan-pwm.dtbo
 r8a779g3-sparrow-hawk-fan-pwm-dtbs := r8a779g3-sparrow-hawk.dtb r8a779g3-sparrow-hawk-fan-pwm.dtbo
 dtb-$(CONFIG_ARCH_R8A779G0) += r8a779g3-sparrow-hawk-fan-pwm.dtb
@@ -180,5 +192,9 @@ r9a09g057h44-rzv2h-evk-cn15-sd-dtbs := r9a09g057h44-rzv2h-evk.dtb rzv2-evk-cn15-
 dtb-$(CONFIG_ARCH_R9A09G057) += r9a09g057h44-rzv2h-evk-cn15-sd.dtb
 dtb-$(CONFIG_ARCH_R9A09G057) += r9a09g057h48-kakip.dtb
 
+dtb-$(CONFIG_ARCH_R9A09G077) += r9a09g077m44-rzt2h-evk.dtb
+
+dtb-$(CONFIG_ARCH_R9A09G087) += r9a09g087m44-rzn2h-evk.dtb
+
 dtb-$(CONFIG_ARCH_RCAR_GEN3) += draak-ebisu-panel-aa104xd12.dtbo
 dtb-$(CONFIG_ARCH_RCAR_GEN3) += salvator-panel-aa104xd12.dtbo
diff --git a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
index c8b87aed92a3..6b737d91b320 100644
--- a/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774a1.dtsi
@@ -1186,7 +1186,7 @@
 				 <&can_clk>;
 			clock-names = "fck", "canfd", "can_clk";
 			assigned-clocks = <&cpg CPG_CORE R8A774A1_CLK_CANFD>;
-			assigned-clock-rates = <40000000>;
+			assigned-clock-rates = <80000000>;
 			power-domains = <&sysc R8A774A1_PD_ALWAYS_ON>;
 			resets = <&cpg 914>;
 			status = "disabled";
diff --git a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
index f2fc2a2035a1..3f15d656215e 100644
--- a/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774b1.dtsi
@@ -1070,7 +1070,7 @@
 				 <&can_clk>;
 			clock-names = "fck", "canfd", "can_clk";
 			assigned-clocks = <&cpg CPG_CORE R8A774B1_CLK_CANFD>;
-			assigned-clock-rates = <40000000>;
+			assigned-clock-rates = <80000000>;
 			power-domains = <&sysc R8A774B1_PD_ALWAYS_ON>;
 			resets = <&cpg 914>;
 			status = "disabled";
diff --git a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
index 530ffd29cf13..55df063cb323 100644
--- a/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774c0.dtsi
@@ -1029,7 +1029,7 @@
 				 <&can_clk>;
 			clock-names = "fck", "canfd", "can_clk";
 			assigned-clocks = <&cpg CPG_CORE R8A774C0_CLK_CANFD>;
-			assigned-clock-rates = <40000000>;
+			assigned-clock-rates = <80000000>;
 			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
 			resets = <&cpg 914>;
 			status = "disabled";
diff --git a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
index e4dbda8c34d9..5d730b488d46 100644
--- a/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a774e1.dtsi
@@ -1298,7 +1298,7 @@
 				 <&can_clk>;
 			clock-names = "fck", "canfd", "can_clk";
 			assigned-clocks = <&cpg CPG_CORE R8A774E1_CLK_CANFD>;
-			assigned-clock-rates = <40000000>;
+			assigned-clock-rates = <80000000>;
 			power-domains = <&sysc R8A774E1_PD_ALWAYS_ON>;
 			resets = <&cpg 914>;
 			status = "disabled";
diff --git a/arch/arm64/boot/dts/renesas/r8a77951.dtsi b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
index 6ee9cdeb5a3a..c389ebc7e6ce 100644
--- a/arch/arm64/boot/dts/renesas/r8a77951.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77951.dtsi
@@ -1373,7 +1373,7 @@
 			       <&can_clk>;
 			clock-names = "fck", "canfd", "can_clk";
 			assigned-clocks = <&cpg CPG_CORE R8A7795_CLK_CANFD>;
-			assigned-clock-rates = <40000000>;
+			assigned-clock-rates = <80000000>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
 			resets = <&cpg 914>;
 			status = "disabled";
diff --git a/arch/arm64/boot/dts/renesas/r8a77960.dtsi b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
index a323ac47ca70..6d039019905d 100644
--- a/arch/arm64/boot/dts/renesas/r8a77960.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77960.dtsi
@@ -1245,7 +1245,7 @@
 			       <&can_clk>;
 			clock-names = "fck", "canfd", "can_clk";
 			assigned-clocks = <&cpg CPG_CORE R8A7796_CLK_CANFD>;
-			assigned-clock-rates = <40000000>;
+			assigned-clock-rates = <80000000>;
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
 			resets = <&cpg 914>;
 			status = "disabled";
diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
index 49f6d31c5903..1637b534fc68 100644
--- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi
@@ -1245,7 +1245,7 @@
 			       <&can_clk>;
 			clock-names = "fck", "canfd", "can_clk";
 			assigned-clocks = <&cpg CPG_CORE R8A77961_CLK_CANFD>;
-			assigned-clock-rates = <40000000>;
+			assigned-clock-rates = <80000000>;
 			power-domains = <&sysc R8A77961_PD_ALWAYS_ON>;
 			resets = <&cpg 914>;
 			status = "disabled";
diff --git a/arch/arm64/boot/dts/renesas/r8a77965.dtsi b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
index 136a22ca50b7..353a77187089 100644
--- a/arch/arm64/boot/dts/renesas/r8a77965.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77965.dtsi
@@ -1108,7 +1108,7 @@
 			       <&can_clk>;
 			clock-names = "fck", "canfd", "can_clk";
 			assigned-clocks = <&cpg CPG_CORE R8A77965_CLK_CANFD>;
-			assigned-clock-rates = <40000000>;
+			assigned-clock-rates = <80000000>;
 			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
 			resets = <&cpg 914>;
 			status = "disabled";
diff --git a/arch/arm64/boot/dts/renesas/r8a77970.dtsi b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
index 01744496805c..e7a5800bf742 100644
--- a/arch/arm64/boot/dts/renesas/r8a77970.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77970.dtsi
@@ -568,7 +568,7 @@
 				 <&can_clk>;
 			clock-names = "fck", "canfd", "can_clk";
 			assigned-clocks = <&cpg CPG_CORE R8A77970_CLK_CANFD>;
-			assigned-clock-rates = <40000000>;
+			assigned-clock-rates = <80000000>;
 			power-domains = <&sysc R8A77970_PD_ALWAYS_ON>;
 			resets = <&cpg 914>;
 			status = "disabled";
diff --git a/arch/arm64/boot/dts/renesas/r8a77980.dtsi b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
index f7e506ad7a21..964aa14f3e65 100644
--- a/arch/arm64/boot/dts/renesas/r8a77980.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77980.dtsi
@@ -621,7 +621,7 @@
 				 <&can_clk>;
 			clock-names = "fck", "canfd", "can_clk";
 			assigned-clocks = <&cpg CPG_CORE R8A77980_CLK_CANFD>;
-			assigned-clock-rates = <40000000>;
+			assigned-clock-rates = <80000000>;
 			power-domains = <&sysc R8A77980_PD_ALWAYS_ON>;
 			resets = <&cpg 914>;
 			status = "disabled";
diff --git a/arch/arm64/boot/dts/renesas/r8a77990.dtsi b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
index 6b8742045836..e16ede6eb379 100644
--- a/arch/arm64/boot/dts/renesas/r8a77990.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a77990.dtsi
@@ -1061,7 +1061,7 @@
 			       <&can_clk>;
 			clock-names = "fck", "canfd", "can_clk";
 			assigned-clocks = <&cpg CPG_CORE R8A77990_CLK_CANFD>;
-			assigned-clock-rates = <40000000>;
+			assigned-clock-rates = <80000000>;
 			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
 			resets = <&cpg 914>;
 			status = "disabled";
diff --git a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
index 95ff69339991..2c3fb34abb28 100644
--- a/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779a0.dtsi
@@ -2949,7 +2949,7 @@
 			};
 		};
 
-		dsi0: dsi-encoder@fed80000 {
+		dsi0: dsi@fed80000 {
 			compatible = "renesas,r8a779a0-dsi-csi2-tx";
 			reg = <0 0xfed80000 0 0x10000>;
 			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
@@ -2977,7 +2977,7 @@
 			};
 		};
 
-		dsi1: dsi-encoder@fed90000 {
+		dsi1: dsi@fed90000 {
 			compatible = "renesas,r8a779a0-dsi-csi2-tx";
 			reg = <0 0xfed90000 0 0x10000>;
 			power-domains = <&sysc R8A779A0_PD_ALWAYS_ON>;
diff --git a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
index 8d9ca30c299c..4fae063bf91b 100644
--- a/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779g0.dtsi
@@ -2476,7 +2476,7 @@
 			};
 		};
 
-		dsi0: dsi-encoder@fed80000 {
+		dsi0: dsi@fed80000 {
 			compatible = "renesas,r8a779g0-dsi-csi2-tx";
 			reg = <0 0xfed80000 0 0x10000>;
 			clocks = <&cpg CPG_MOD 415>,
@@ -2505,7 +2505,7 @@
 			};
 		};
 
-		dsi1: dsi-encoder@fed90000 {
+		dsi1: dsi@fed90000 {
 			compatible = "renesas,r8a779g0-dsi-csi2-tx";
 			reg = <0 0xfed90000 0 0x10000>;
 			clocks = <&cpg CPG_MOD 416>,
diff --git a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j1-imx219.dtso b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j1-imx219.dtso
new file mode 100644
index 000000000000..3acaf714cf24
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j1-imx219.dtso
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Overlay for an IMX219 camera sensor on connector J1 on R-Car V4H
+ * ES3.0 Sparrow Hawk board.
+ *
+ * Copyright 2025 Renesas Electronics Corp.
+ * Copyright 2025 Niklas Söderlund <niklas.soderlund@ragnatech.se>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/video-interfaces.h>
+
+&{/} {
+	clk_cam_j1: clk-cam-j1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	/* Page 29 / CSI_IF_CN / J1 */
+	reg_cam_j1: reg-cam-j1 {
+		compatible = "regulator-fixed";
+		regulator-name = "cam-J1";
+		enable-active-high;
+		gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	cam@10 {
+		compatible = "sony,imx219";
+		reg = <0x10>;
+
+		clocks = <&clk_cam_j1>;
+
+		VANA-supply = <&reg_cam_j1>;
+		VDIG-supply = <&reg_cam_j1>;
+		VDDL-supply = <&reg_cam_j1>;
+
+		orientation = <2>;
+		rotation = <0>;
+
+		port {
+			imx219_j1_out: endpoint {
+				clock-noncontinuous;
+				link-frequencies = /bits/ 64 <456000000>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&csi40_in>;
+			};
+		};
+	};
+};
+
+/* Page 29 / CSI_IF_CN */
+&csi40 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			csi40_in: endpoint {
+				bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&imx219_j1_out>;
+			};
+		};
+	};
+};
+
+&isp0 {
+	status = "okay";
+};
+
+&vin00 {
+	status = "okay";
+};
+
+&vin01 {
+	status = "okay";
+};
+
+&vin02 {
+	status = "okay";
+};
+
+&vin03 {
+	status = "okay";
+};
+
+&vin04 {
+	status = "okay";
+};
+
+&vin05 {
+	status = "okay";
+};
+
+&vin06 {
+	status = "okay";
+};
+
+&vin07 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j1-imx462.dtso b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j1-imx462.dtso
new file mode 100644
index 000000000000..a19bc0840392
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j1-imx462.dtso
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Overlay for an IMX462 camera sensor on connector J1 on R-Car V4H
+ * ES3.0 Sparrow Hawk board.
+ *
+ * Copyright 2025 Renesas Electronics Corp.
+ * Copyright 2025 Niklas Söderlund <niklas.soderlund@ragnatech.se>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/video-interfaces.h>
+
+&{/} {
+	clk_cam_j1: clk-cam-j1 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <37125000>;
+	};
+
+	/* Page 29 / CSI_IF_CN / J1 */
+	reg_cam_j1: reg-cam-j1 {
+		compatible = "regulator-fixed";
+		regulator-name = "cam-J1";
+		enable-active-high;
+		gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	cam@1a {
+		compatible = "sony,imx462lqr";
+		reg = <0x1a>;
+
+		clocks = <&clk_cam_j1>;
+		clock-names = "xclk";
+		clock-frequency = <37125000>;
+
+		vdddo-supply = <&reg_cam_j1>;
+		vdda-supply = <&reg_cam_j1>;
+		vddd-supply = <&reg_cam_j1>;
+
+		orientation = <2>;
+		rotation = <0>;
+
+		port {
+			imx462_j1_out: endpoint {
+				link-frequencies = /bits/ 64 <222750000 148500000>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&csi40_in>;
+			};
+		};
+	};
+};
+
+/* Page 29 / CSI_IF_CN */
+&csi40 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			csi40_in: endpoint {
+				bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+				clock-lanes = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&imx462_j1_out>;
+			};
+		};
+	};
+};
+
+&isp0 {
+	status = "okay";
+};
+
+&vin00 {
+	status = "okay";
+};
+
+&vin01 {
+	status = "okay";
+};
+
+&vin02 {
+	status = "okay";
+};
+
+&vin03 {
+	status = "okay";
+};
+
+&vin04 {
+	status = "okay";
+};
+
+&vin05 {
+	status = "okay";
+};
+
+&vin06 {
+	status = "okay";
+};
+
+&vin07 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j2-imx219.dtso b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j2-imx219.dtso
new file mode 100644
index 000000000000..512810b861aa
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j2-imx219.dtso
@@ -0,0 +1,116 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Overlay for an IMX219 camera sensor on connector J2 on R-Car V4H
+ * ES3.0 Sparrow Hawk board.
+ *
+ * Copyright 2025 Renesas Electronics Corp.
+ * Copyright 2025 Niklas Söderlund <niklas.soderlund@ragnatech.se>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/video-interfaces.h>
+
+&{/} {
+	clk_cam_j2: clk-cam-j2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <24000000>;
+	};
+
+	/* Page 29 / CSI_IF_CN / J2 */
+	reg_cam_j2: reg-cam-j2 {
+		compatible = "regulator-fixed";
+		regulator-name = "cam-J2";
+		enable-active-high;
+		gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	cam@10 {
+		compatible = "sony,imx219";
+		reg = <0x10>;
+
+		clocks = <&clk_cam_j2>;
+
+		VANA-supply = <&reg_cam_j2>;
+		VDIG-supply = <&reg_cam_j2>;
+		VDDL-supply = <&reg_cam_j2>;
+
+		orientation = <2>;
+		rotation = <0>;
+
+		port {
+			imx219_j2_out: endpoint {
+				clock-noncontinuous;
+				link-frequencies = /bits/ 64 <456000000>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&csi41_in>;
+			};
+		};
+	};
+};
+
+/* Page 29 / CSI_IF_CN */
+&csi41 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			csi41_in: endpoint {
+				bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+				remote-endpoint = <&imx219_j2_out>;
+			};
+		};
+	};
+};
+
+&isp1 {
+	status = "okay";
+};
+
+&vin08 {
+	status = "okay";
+};
+
+&vin09 {
+	status = "okay";
+};
+
+&vin10 {
+	status = "okay";
+};
+
+&vin11 {
+	status = "okay";
+};
+
+&vin12 {
+	status = "okay";
+};
+
+&vin13 {
+	status = "okay";
+};
+
+&vin14 {
+	status = "okay";
+};
+
+&vin15 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j2-imx462.dtso b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j2-imx462.dtso
new file mode 100644
index 000000000000..a31524b59834
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-camera-j2-imx462.dtso
@@ -0,0 +1,117 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Overlay for an IMX462 camera sensor on connector J2 on R-Car V4H
+ * ES3.0 Sparrow Hawk board.
+ *
+ * Copyright 2025 Renesas Electronics Corp.
+ * Copyright 2025 Niklas Söderlund <niklas.soderlund@ragnatech.se>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/media/video-interfaces.h>
+
+&{/} {
+	clk_cam_j2: clk-cam-j2 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <37125000>;
+	};
+
+	/* Page 29 / CSI_IF_CN / J2 */
+	reg_cam_j2: reg-cam-j2 {
+		compatible = "regulator-fixed";
+		regulator-name = "cam-J2";
+		enable-active-high;
+		gpios = <&gpio0 2 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c2 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	cam@1a {
+		compatible = "sony,imx462lqr";
+		reg = <0x1a>;
+
+		clocks = <&clk_cam_j2>;
+		clock-names = "xclk";
+		clock-frequency = <37125000>;
+
+		vdddo-supply = <&reg_cam_j2>;
+		vdda-supply = <&reg_cam_j2>;
+		vddd-supply = <&reg_cam_j2>;
+
+		orientation = <2>;
+		rotation = <0>;
+
+		port {
+			imx462_j2_out: endpoint {
+				link-frequencies = /bits/ 64 <222750000 148500000>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&csi41_in>;
+			};
+		};
+	};
+};
+
+/* Page 29 / CSI_IF_CN */
+&csi41 {
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			csi41_in: endpoint {
+				bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+				clock-lanes = <0>;
+				data-lanes = <1 2 3 4>;
+				remote-endpoint = <&imx462_j2_out>;
+			};
+		};
+	};
+};
+
+&isp1 {
+	status = "okay";
+};
+
+&vin08 {
+	status = "okay";
+};
+
+&vin09 {
+	status = "okay";
+};
+
+&vin10 {
+	status = "okay";
+};
+
+&vin11 {
+	status = "okay";
+};
+
+&vin12 {
+	status = "okay";
+};
+
+&vin13 {
+	status = "okay";
+};
+
+&vin14 {
+	status = "okay";
+};
+
+&vin15 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-fan-pwm.dtso b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-fan-pwm.dtso
index 50d53c8d76c5..fbfec57db11e 100644
--- a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-fan-pwm.dtso
+++ b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk-fan-pwm.dtso
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 /*
- * Device Tree Overlay for the PWM controlled blower fan in connector J3:FAN
+ * Device Tree Overlay for the PWM controlled blower fan on connector J3:FAN
  * on R-Car V4H ES3.0 Sparrow Hawk board
  *
  * Copyright (C) 2025 Marek Vasut <marek.vasut+renesas@mailbox.org>
@@ -9,21 +9,16 @@
  *
  * # Localize hwmon sysfs directory that matches the PWM fan,
  * # enable the PWM fan, and configure the fan speed manually.
- * r8a779g3-sparrow-hawk$ grep -H . /sys/class/hwmon/hwmon?/name
- * /sys/class/hwmon/hwmon0/name:sensor1_thermal
- * /sys/class/hwmon/hwmon1/name:sensor2_thermal
- * /sys/class/hwmon/hwmon2/name:sensor3_thermal
- * /sys/class/hwmon/hwmon3/name:sensor4_thermal
- * /sys/class/hwmon/hwmon4/name:pwmfan
- *                       ^      ^^^^^^
+ * r8a779g3-sparrow-hawk$ ls -1 /sys/devices/platform/pwm-fan/hwmon/hwmon?/pwm?_enable
+ * /sys/devices/platform/pwm-fan/hwmon/hwmon4/pwm1_enable
  *
  * # Select mode 2 , enable fan PWM and regulator and keep them enabled.
  * # For details, see Linux Documentation/hwmon/pwm-fan.rst
- * r8a779g3-sparrow-hawk$ echo 2 > /sys/class/hwmon/hwmon4/pwm1_enable
+ * r8a779g3-sparrow-hawk$ echo 2 > /sys/devices/platform/pwm-fan/hwmon/hwmon4/pwm1_enable
  *
  * # Configure PWM fan speed in range 0..255 , 0 is stopped , 255 is full speed .
  * # Fan speed 101 is about 2/5 of the PWM fan speed:
- * r8a779g3-sparrow-hawk$ echo 101 > /sys/class/hwmon/hwmon4/pwm1
+ * r8a779g3-sparrow-hawk$ echo 101 > /sys/devices/platform/pwm-fan/hwmon/hwmon4/pwm1
  */
 
 /dts-v1/;
diff --git a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts
index 9ba23129e65e..1da8e476b219 100644
--- a/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts
+++ b/arch/arm64/boot/dts/renesas/r8a779g3-sparrow-hawk.dts
@@ -38,6 +38,7 @@
 
 /dts-v1/;
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/thermal/thermal.h>
 
 #include "r8a779g3.dtsi"
 
@@ -185,7 +186,42 @@
 		regulator-max-microvolt = <3300000>;
 		gpios = <&gpio8 13 GPIO_ACTIVE_HIGH>;
 		gpios-states = <1>;
-		states = <3300000 0>, <1800000 1>;
+		states = <1800000 0>, <3300000 1>;
+	};
+};
+
+/* Use thermal-idle cooling for all SoC cores */
+&a76_0 {
+	#cooling-cells = <2>;
+
+	a76_0_thermal_idle: thermal-idle {
+		#cooling-cells = <2>;
+		duration-us = <10000>;
+		exit-latency-us = <500>;
+	};
+};
+
+&a76_1 {
+	a76_1_thermal_idle: thermal-idle {
+		#cooling-cells = <2>;
+		duration-us = <10000>;
+		exit-latency-us = <500>;
+	};
+};
+
+&a76_2 {
+	a76_2_thermal_idle: thermal-idle {
+		#cooling-cells = <2>;
+		duration-us = <10000>;
+		exit-latency-us = <500>;
+	};
+};
+
+&a76_3 {
+	a76_3_thermal_idle: thermal-idle {
+		#cooling-cells = <2>;
+		duration-us = <10000>;
+		exit-latency-us = <500>;
 	};
 };
 
@@ -556,6 +592,10 @@
 			drive-strength = <21>;
 		};
 
+		pins-vddq18-25-avb {
+			pins = "PIN_VDDQ_AVB0", "PIN_VDDQ_AVB1", "PIN_VDDQ_AVB2", "PIN_VDDQ_TSN0";
+			power-source = <1800>;
+		};
 	};
 
 	/* Page 28 / CANFD_IF */
@@ -756,7 +796,11 @@
 	status = "okay";
 
 	flash@0 {
-		compatible = "spansion,s25fs512s", "jedec,spi-nor";
+		/*
+		 * EVTA1 is populated with Spansion S25FS512S
+		 * EVTB1 is populated with Winbond W77Q51NW
+		 */
+		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <40000000>;
 		spi-rx-bus-width = <4>;
@@ -797,3 +841,104 @@
 &scif_clk {	/* X12 */
 	clock-frequency = <24000000>;
 };
+
+/* THS sensors in SoC, critical temperature trip point is 100C */
+&sensor1_crit {
+	temperature = <100000>;
+};
+
+&sensor2_crit {
+	temperature = <100000>;
+};
+
+&sensor3_crit {
+	temperature = <100000>;
+};
+
+&sensor4_crit {
+	temperature = <100000>;
+};
+
+/* THS sensor in SoC near CA76 cores does more progressive cooling. */
+&sensor_thermal_ca76 {
+	critical-action = "shutdown";
+
+	cooling-maps {
+		/*
+		 * The cooling-device minimum and maximum parameters inversely
+		 * match opp-table-0 {} node entries in r8a779g0.dtsi, in other
+		 * words, 0 refers to 1.8 GHz OPP and 4 refers to 500 MHz OPP.
+		 * This is because they refer to cooling levels, where maximum
+		 * cooling level happens at 500 MHz OPP, when the CPU core is
+		 * running slowly and therefore generates least heat.
+		 */
+		map0 {
+			/* At 68C, inhibit 1.7 GHz and 1.8 GHz modes */
+			trip = <&sensor3_passive_low>;
+			cooling-device = <&a76_0 2 4>;
+			contribution = <128>;
+		};
+
+		map1 {
+			/* At 72C, inhibit 1.5 GHz mode */
+			trip = <&sensor3_passive_mid>;
+			cooling-device = <&a76_0 3 4>;
+			contribution = <256>;
+		};
+
+		map2 {
+			/* At 76C, start injecting idle states 0..80% of time */
+			trip = <&sensor3_passive_hi>;
+			cooling-device = <&a76_0_thermal_idle 0 80>,
+					 <&a76_1_thermal_idle 0 80>,
+					 <&a76_2_thermal_idle 0 80>,
+					 <&a76_3_thermal_idle 0 80>;
+			contribution = <512>;
+		};
+
+		map3 {
+			/* At 80C, inhibit 1.0 GHz mode */
+			trip = <&sensor3_passive_crit>;
+			cooling-device = <&a76_0 4 4>;
+			contribution = <1024>;
+		};
+	};
+
+	trips {
+		sensor3_passive_low: sensor3-passive-low {
+			temperature = <68000>;
+			hysteresis = <2000>;
+			type = "passive";
+		};
+
+		sensor3_passive_mid: sensor3-passive-mid {
+			temperature = <72000>;
+			hysteresis = <2000>;
+			type = "passive";
+		};
+
+		sensor3_passive_hi: sensor3-passive-hi {
+			temperature = <76000>;
+			hysteresis = <2000>;
+			type = "passive";
+		};
+
+		sensor3_passive_crit: sensor3-passive-crit {
+			temperature = <80000>;
+			hysteresis = <2000>;
+			type = "passive";
+		};
+	};
+};
+
+&sensor_thermal_cnn {
+	critical-action = "shutdown";
+};
+
+&sensor_thermal_cr52 {
+	critical-action = "shutdown";
+};
+
+&sensor_thermal_ddr1 {
+	critical-action = "shutdown";
+};
diff --git a/arch/arm64/boot/dts/renesas/r8a779h0.dtsi b/arch/arm64/boot/dts/renesas/r8a779h0.dtsi
index ed1eefa3515d..0f20a2d23983 100644
--- a/arch/arm64/boot/dts/renesas/r8a779h0.dtsi
+++ b/arch/arm64/boot/dts/renesas/r8a779h0.dtsi
@@ -2144,7 +2144,7 @@
 			};
 		};
 
-		dsi0: dsi-encoder@fed80000 {
+		dsi0: dsi@fed80000 {
 			compatible = "renesas,r8a779h0-dsi-csi2-tx";
 			reg = <0 0xfed80000 0 0x10000>;
 			clocks = <&cpg CPG_MOD 415>,
diff --git a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
index 0364f89776e6..16e6ac614417 100644
--- a/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a08g045.dtsi
@@ -272,6 +272,42 @@
 			};
 		};
 
+		i3c: i3c@1005b000 {
+			compatible = "renesas,r9a08g045-i3c";
+			reg = <0 0x1005b000 0 0x1000>;
+			clocks = <&cpg CPG_MOD R9A08G045_I3C_PCLK>,
+				 <&cpg CPG_MOD R9A08G045_I3C_TCLK>;
+			clock-names = "pclk", "tclk";
+			interrupts = <GIC_SPI 289 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 290 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 293 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 294 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 295 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 296 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 297 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 298 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 299 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 304 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 305 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 310 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 311 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 306 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ierr", "terr", "abort", "resp",
+					  "cmd", "ibi", "rx", "tx", "rcv",
+					  "st", "sp", "tend", "nack", "al",
+					  "tmo", "wu", "exit";
+			resets = <&cpg R9A08G045_I3C_PRESETN>,
+				 <&cpg R9A08G045_I3C_TRESETN>;
+			reset-names = "presetn", "tresetn";
+			power-domains = <&cpg>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		vbattb: clock-controller@1005c000 {
 			compatible = "renesas,r9a08g045-vbattb";
 			reg = <0 0x1005c000 0 0x1000>;
diff --git a/arch/arm64/boot/dts/renesas/r9a09g047.dtsi b/arch/arm64/boot/dts/renesas/r9a09g047.dtsi
index e4fac7e0d764..47d843c79021 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g047.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a09g047.dtsi
@@ -301,6 +301,176 @@
 			status = "disabled";
 		};
 
+		dmac0: dma-controller@11400000 {
+			compatible = "renesas,r9a09g047-dmac",
+				     "renesas,r9a09g057-dmac";
+			reg = <0 0x11400000 0 0x10000>;
+			interrupts = <GIC_SPI 499 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 89  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 90  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 91  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 92  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 93  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 94  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 95  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 96  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 97  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 98  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 99  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 100 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 101 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 102 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 103 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 104 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 0x0>;
+			power-domains = <&cpg>;
+			resets = <&cpg 0x31>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			renesas,icu = <&icu 4>;
+		};
+
+		dmac1: dma-controller@14830000 {
+			compatible = "renesas,r9a09g047-dmac",
+				     "renesas,r9a09g057-dmac";
+			reg = <0 0x14830000 0 0x10000>;
+			interrupts = <GIC_SPI 495 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 25  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 26  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 27  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 28  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 29  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 30  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 31  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 32  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 33  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 34  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 35  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 36  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 37  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 38  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 39  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 40  IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 0x1>;
+			power-domains = <&cpg>;
+			resets = <&cpg 0x32>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			renesas,icu = <&icu 0>;
+		};
+
+		dmac2: dma-controller@14840000 {
+			compatible = "renesas,r9a09g047-dmac",
+				     "renesas,r9a09g057-dmac";
+			reg = <0 0x14840000 0 0x10000>;
+			interrupts = <GIC_SPI 496 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 41  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 42  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 43  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 44  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 45  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 46  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 47  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 48  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 49  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 50  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 51  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 52  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 53  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 54  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 55  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 56  IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 0x2>;
+			power-domains = <&cpg>;
+			resets = <&cpg 0x33>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			renesas,icu = <&icu 1>;
+		};
+
+		dmac3: dma-controller@12000000 {
+			compatible = "renesas,r9a09g047-dmac",
+				     "renesas,r9a09g057-dmac";
+			reg = <0 0x12000000 0 0x10000>;
+			interrupts = <GIC_SPI 497 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 57  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 58  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 59  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 60  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 61  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 62  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 63  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 64  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 65  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 66  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 67  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 68  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 69  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 70  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 71  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 72  IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 0x3>;
+			power-domains = <&cpg>;
+			resets = <&cpg 0x34>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			renesas,icu = <&icu 2>;
+		};
+
+		dmac4: dma-controller@12010000 {
+			compatible = "renesas,r9a09g047-dmac",
+				     "renesas,r9a09g057-dmac";
+			reg = <0 0x12010000 0 0x10000>;
+			interrupts = <GIC_SPI 498 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 73  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 74  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 75  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 76  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 77  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 78  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 79  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 80  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 81  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 82  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 83  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 84  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 85  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 86  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 87  IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 88  IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "error",
+					  "ch0", "ch1", "ch2", "ch3",
+					  "ch4", "ch5", "ch6", "ch7",
+					  "ch8", "ch9", "ch10", "ch11",
+					  "ch12", "ch13", "ch14", "ch15";
+			clocks = <&cpg CPG_MOD 0x4>;
+			power-domains = <&cpg>;
+			resets = <&cpg 0x35>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			renesas,icu = <&icu 3>;
+		};
+
 		scif0: serial@11c01400 {
 			compatible = "renesas,scif-r9a09g047", "renesas,scif-r9a09g057";
 			reg = <0 0x11c01400 0 0x400>;
@@ -322,6 +492,41 @@
 			status = "disabled";
 		};
 
+		i3c: i3c@12400000 {
+			compatible = "renesas,r9a09g047-i3c";
+			reg = <0 0x12400000 0 0x10000>;
+			clocks = <&cpg CPG_MOD 0x91>,
+				 <&cpg CPG_MOD 0x92>,
+				 <&cpg CPG_MOD 0x90>;
+			clock-names = "pclk", "tclk", "pclkrw";
+			interrupts = <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 675 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 676 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 677 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 678 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 679 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 680 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 681 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 682 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ierr", "terr", "abort", "resp",
+					  "cmd", "ibi", "rx", "tx", "rcv",
+					  "st", "sp", "tend", "nack", "al",
+					  "tmo", "wu";
+			resets = <&cpg 0x96>, <&cpg 0x97>;
+			reset-names = "presetn", "tresetn";
+			power-domains = <&cpg>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		canfd: can@12440000 {
 			compatible = "renesas,r9a09g047-canfd";
 			reg = <0 0x12440000 0 0x40000>;
@@ -722,9 +927,8 @@
 			snps,perfect-filter-entries = <128>;
 			rx-fifo-depth = <8192>;
 			tx-fifo-depth = <8192>;
-			snps,fixed-burst;
-			snps,no-pbl-x8;
-			snps,force_thresh_dma_mode;
+			snps,mixed-burst;
+			snps,force_sf_dma_mode;
 			snps,axi-config = <&stmmac_axi_setup>;
 			snps,mtl-rx-config = <&mtl_rx_setup0>;
 			snps,mtl-tx-config = <&mtl_tx_setup0>;
@@ -823,9 +1027,8 @@
 			snps,perfect-filter-entries = <128>;
 			rx-fifo-depth = <8192>;
 			tx-fifo-depth = <8192>;
-			snps,fixed-burst;
-			snps,no-pbl-x8;
-			snps,force_thresh_dma_mode;
+			snps,mixed-burst;
+			snps,force_sf_dma_mode;
 			snps,axi-config = <&stmmac_axi_setup>;
 			snps,mtl-rx-config = <&mtl_rx_setup1>;
 			snps,mtl-tx-config = <&mtl_tx_setup1>;
diff --git a/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts b/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts
index 1e67f0a2a945..08e814c03fa8 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts
+++ b/arch/arm64/boot/dts/renesas/r9a09g047e57-smarc.dts
@@ -90,10 +90,10 @@
 };
 
 &keys {
-	key-sleep {
-		pinctrl-0 = <&nmi_pins>;
-		pinctrl-names = "default";
+	pinctrl-0 = <&nmi_pins>;
+	pinctrl-names = "default";
 
+	key-sleep {
 		interrupts-extended = <&icu 0 IRQ_TYPE_EDGE_FALLING>;
 		linux,code = <KEY_SLEEP>;
 		label = "SLEEP";
@@ -132,6 +132,7 @@
 
 	nmi_pins: nmi {
 		pinmux = <RZG3E_PORT_PINMUX(S, 0, 0)>; /* NMI */
+		input-schmitt-enable;
 	};
 
 	scif_pins: scif {
diff --git a/arch/arm64/boot/dts/renesas/r9a09g056.dtsi b/arch/arm64/boot/dts/renesas/r9a09g056.dtsi
index 10d3b9727ea5..887110878906 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g056.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a09g056.dtsi
@@ -369,6 +369,39 @@
 			status = "disabled";
 		};
 
+		i3c: i3c@12400000 {
+			compatible = "renesas,r9a09g056-i3c", "renesas,r9a09g047-i3c";
+			reg = <0 0x12400000 0 0x10000>;
+			clocks = <&cpg CPG_MOD 0x91>, <&cpg CPG_MOD 0x92>, <&cpg CPG_MOD 0x90>;
+			clock-names = "pclk", "tclk", "pclkrw";
+			interrupts = <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 675 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 676 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 677 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 678 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 679 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 680 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 681 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 682 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ierr", "terr", "abort", "resp",
+					  "cmd", "ibi", "rx", "tx", "rcv",
+					  "st", "sp", "tend", "nack",
+					  "al", "tmo", "wu";
+			resets = <&cpg 0x96>, <&cpg 0x97>;
+			reset-names = "presetn", "tresetn";
+			power-domains = <&cpg>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		i2c0: i2c@14400400 {
 			compatible = "renesas,riic-r9a09g056", "renesas,riic-r9a09g057";
 			reg = <0 0x14400400 0 0x400>;
@@ -735,10 +768,10 @@
 					  "rx-queue-0", "rx-queue-1", "rx-queue-2",
 					  "rx-queue-3", "tx-queue-0", "tx-queue-1",
 					  "tx-queue-2", "tx-queue-3";
-			clocks =  <&cpg CPG_MOD 0xbd>, <&cpg CPG_MOD 0xbc>,
-				  <&cpg CPG_CORE R9A09G056_GBETH_0_CLK_PTP_REF_I>,
-				  <&cpg CPG_MOD 0xb8>, <&cpg CPG_MOD 0xb9>,
-				  <&cpg CPG_MOD 0xba>, <&cpg CPG_MOD 0xbb>;
+			clocks = <&cpg CPG_MOD 0xbd>, <&cpg CPG_MOD 0xbc>,
+				 <&cpg CPG_CORE R9A09G056_GBETH_0_CLK_PTP_REF_I>,
+				 <&cpg CPG_MOD 0xb8>, <&cpg CPG_MOD 0xb9>,
+				 <&cpg CPG_MOD 0xba>, <&cpg CPG_MOD 0xbb>;
 			clock-names = "stmmaceth", "pclk", "ptp_ref",
 				      "tx", "rx", "tx-180", "rx-180";
 			resets = <&cpg 0xb0>;
@@ -836,10 +869,10 @@
 					  "rx-queue-0", "rx-queue-1", "rx-queue-2",
 					  "rx-queue-3", "tx-queue-0", "tx-queue-1",
 					  "tx-queue-2", "tx-queue-3";
-			clocks =  <&cpg CPG_MOD 0xc3>, <&cpg CPG_MOD 0xc2>,
-				  <&cpg CPG_CORE R9A09G056_GBETH_1_CLK_PTP_REF_I>,
-				  <&cpg CPG_MOD 0xbe>, <&cpg CPG_MOD 0xbf>,
-				  <&cpg CPG_MOD 0xc0>, <&cpg CPG_MOD 0xc1>;
+			clocks = <&cpg CPG_MOD 0xc3>, <&cpg CPG_MOD 0xc2>,
+				 <&cpg CPG_CORE R9A09G056_GBETH_1_CLK_PTP_REF_I>,
+				 <&cpg CPG_MOD 0xbe>, <&cpg CPG_MOD 0xbf>,
+				 <&cpg CPG_MOD 0xc0>, <&cpg CPG_MOD 0xc1>;
 			clock-names = "stmmaceth", "pclk", "ptp_ref",
 				      "tx", "rx", "tx-180", "rx-180";
 			resets = <&cpg 0xb1>;
diff --git a/arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dts b/arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dts
index 03aeea781186..066e66b5d51a 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dts
+++ b/arch/arm64/boot/dts/renesas/r9a09g056n48-rzv2n-evk.dts
@@ -334,7 +334,7 @@
 
 	usb20_pins: usb20 {
 		ovc {
-			pinmux =  <RZV2N_PORT_PINMUX(9, 6, 14)>; /* OVC */
+			pinmux = <RZV2N_PORT_PINMUX(9, 6, 14)>; /* OVC */
 		};
 
 		vbus {
diff --git a/arch/arm64/boot/dts/renesas/r9a09g057.dtsi b/arch/arm64/boot/dts/renesas/r9a09g057.dtsi
index 044f2a22f161..630f7a98df38 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g057.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a09g057.dtsi
@@ -607,6 +607,102 @@
 			status = "disabled";
 		};
 
+		i3c: i3c@12400000 {
+			compatible = "renesas,r9a09g057-i3c", "renesas,r9a09g047-i3c";
+			reg = <0 0x12400000 0 0x10000>;
+			clocks = <&cpg CPG_MOD 0x91>, <&cpg CPG_MOD 0x92>, <&cpg CPG_MOD 0x90>;
+			clock-names = "pclk", "tclk", "pclkrw";
+			interrupts = <GIC_SPI 674 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 675 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 676 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 677 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 678 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 679 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 680 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 681 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 682 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 689 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 690 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 692 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 693 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 694 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 695 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 696 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "ierr", "terr", "abort", "resp",
+					  "cmd", "ibi", "rx", "tx", "rcv",
+					  "st", "sp", "tend", "nack",
+					  "al", "tmo", "wu";
+			resets = <&cpg 0x96>, <&cpg 0x97>;
+			reset-names = "presetn", "tresetn";
+			power-domains = <&cpg>;
+			#address-cells = <3>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		rspi0: spi@12800000 {
+			compatible = "renesas,r9a09g057-rspi";
+			reg = <0x0 0x12800000 0x0 0x400>;
+			interrupts = <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 107 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 500 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 501 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "idle", "error", "end", "rx", "tx";
+			clocks = <&cpg CPG_MOD 0x54>,
+				 <&cpg CPG_MOD 0x55>,
+				 <&cpg CPG_MOD 0x56>;
+			clock-names = "pclk", "pclk_sfr", "tclk";
+			resets = <&cpg 0x7b>, <&cpg 0x7c>;
+			reset-names = "presetn", "tresetn";
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		rspi1: spi@12800400 {
+			compatible = "renesas,r9a09g057-rspi";
+			reg = <0x0 0x12800400 0x0 0x400>;
+			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 110 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 502 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 503 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "idle", "error", "end", "rx", "tx";
+			clocks = <&cpg CPG_MOD 0x57>,
+				 <&cpg CPG_MOD 0x58>,
+				 <&cpg CPG_MOD 0x59>;
+			clock-names = "pclk", "pclk_sfr", "tclk";
+			resets = <&cpg 0x7d>, <&cpg 0x7e>;
+			reset-names = "presetn", "tresetn";
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		rspi2: spi@12800800 {
+			compatible = "renesas,r9a09g057-rspi";
+			reg = <0x0 0x12800800 0x0 0x400>;
+			interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 504 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 505 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "idle", "error", "end", "rx", "tx";
+			clocks = <&cpg CPG_MOD 0x5a>,
+				 <&cpg CPG_MOD 0x5b>,
+				 <&cpg CPG_MOD 0x5c>;
+			clock-names = "pclk", "pclk_sfr", "tclk";
+			resets = <&cpg 0x7f>, <&cpg 0x80>;
+			reset-names = "presetn", "tresetn";
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
 		i2c0: i2c@14400400 {
 			compatible = "renesas,riic-r9a09g057";
 			reg = <0 0x14400400 0 0x400>;
@@ -1020,10 +1116,10 @@
 					  "rx-queue-0", "rx-queue-1", "rx-queue-2",
 					  "rx-queue-3", "tx-queue-0", "tx-queue-1",
 					  "tx-queue-2", "tx-queue-3";
-			clocks =  <&cpg CPG_MOD 0xbd>, <&cpg CPG_MOD 0xbc>,
-				  <&cpg CPG_CORE R9A09G057_GBETH_0_CLK_PTP_REF_I>,
-				  <&cpg CPG_MOD 0xb8>, <&cpg CPG_MOD 0xb9>,
-				  <&cpg CPG_MOD 0xba>, <&cpg CPG_MOD 0xbb>;
+			clocks = <&cpg CPG_MOD 0xbd>, <&cpg CPG_MOD 0xbc>,
+				 <&cpg CPG_CORE R9A09G057_GBETH_0_CLK_PTP_REF_I>,
+				 <&cpg CPG_MOD 0xb8>, <&cpg CPG_MOD 0xb9>,
+				 <&cpg CPG_MOD 0xba>, <&cpg CPG_MOD 0xbb>;
 			clock-names = "stmmaceth", "pclk", "ptp_ref",
 				      "tx", "rx", "tx-180", "rx-180";
 			resets = <&cpg 0xb0>;
@@ -1121,10 +1217,10 @@
 					  "rx-queue-0", "rx-queue-1", "rx-queue-2",
 					  "rx-queue-3", "tx-queue-0", "tx-queue-1",
 					  "tx-queue-2", "tx-queue-3";
-			clocks =  <&cpg CPG_MOD 0xc3>, <&cpg CPG_MOD 0xc2>,
-				  <&cpg CPG_CORE R9A09G057_GBETH_1_CLK_PTP_REF_I>,
-				  <&cpg CPG_MOD 0xbe>, <&cpg CPG_MOD 0xbf>,
-				  <&cpg CPG_MOD 0xc0>, <&cpg CPG_MOD 0xc1>;
+			clocks = <&cpg CPG_MOD 0xc3>, <&cpg CPG_MOD 0xc2>,
+				 <&cpg CPG_CORE R9A09G057_GBETH_1_CLK_PTP_REF_I>,
+				 <&cpg CPG_MOD 0xbe>, <&cpg CPG_MOD 0xbf>,
+				 <&cpg CPG_MOD 0xc0>, <&cpg CPG_MOD 0xc1>;
 			clock-names = "stmmaceth", "pclk", "ptp_ref",
 				      "tx", "rx", "tx-180", "rx-180";
 			resets = <&cpg 0xb1>;
diff --git a/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts b/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts
index 5c3f4e471e3d..5c06bce3d5b4 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts
+++ b/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts
@@ -353,7 +353,7 @@
 
 	usb20_pins: usb20 {
 		ovc {
-			pinmux =  <RZV2H_PORT_PINMUX(9, 6, 14)>; /* OVC */
+			pinmux = <RZV2H_PORT_PINMUX(9, 6, 14)>; /* OVC */
 		};
 
 		vbus {
diff --git a/arch/arm64/boot/dts/renesas/r9a09g057h48-kakip.dts b/arch/arm64/boot/dts/renesas/r9a09g057h48-kakip.dts
index d2586d278769..adf3ab8aef2b 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g057h48-kakip.dts
+++ b/arch/arm64/boot/dts/renesas/r9a09g057h48-kakip.dts
@@ -1,6 +1,6 @@
 // SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
 /*
- * Device Tree Source for Yuridenki-Shokai the Kakip board
+ * Device Tree Source for the Yuridenki-Shokai Kakip board
  *
  * Copyright (C) 2024 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
  */
@@ -84,7 +84,7 @@
 
 &pinctrl {
 	scif_pins: scif {
-		pins =  "SCIF_RXD", "SCIF_TXD";
+		pins = "SCIF_RXD", "SCIF_TXD";
 	};
 
 	sd0-pwr-en-hog {
diff --git a/arch/arm64/boot/dts/renesas/r9a09g077.dtsi b/arch/arm64/boot/dts/renesas/r9a09g077.dtsi
new file mode 100644
index 000000000000..7f1aca218c9f
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a09g077.dtsi
@@ -0,0 +1,399 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/T2H SoC
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/renesas,r9a09g077-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "renesas,r9a09g077";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a55";
+			reg = <0>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@100 {
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@200 {
+			compatible = "arm,cortex-a55";
+			reg = <0x200>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@300 {
+			compatible = "arm,cortex-a55";
+			reg = <0x300>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+		};
+
+		L3_CA55: cache-controller-0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-level = <3>;
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		sci0: serial@80005000 {
+			compatible = "renesas,r9a09g077-rsci";
+			reg = <0 0x80005000 0 0x400>;
+			interrupts = <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 591 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 592 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD 8>, <&cpg CPG_CORE R9A09G077_CLK_PCLKM>;
+			clock-names = "operation", "bus";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		sci1: serial@80005400 {
+			compatible = "renesas,r9a09g077-rsci";
+			reg = <0 0x80005400 0 0x400>;
+			interrupts = <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 595 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 596 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD 9>, <&cpg CPG_CORE R9A09G077_CLK_PCLKM>;
+			clock-names = "operation", "bus";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		sci2: serial@80005800 {
+			compatible = "renesas,r9a09g077-rsci";
+			reg = <0 0x80005800 0 0x400>;
+			interrupts = <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 599 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 600 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD 10>, <&cpg CPG_CORE R9A09G077_CLK_PCLKM>;
+			clock-names = "operation", "bus";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		sci3: serial@80005c00 {
+			compatible = "renesas,r9a09g077-rsci";
+			reg = <0 0x80005c00 0 0x400>;
+			interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 603 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 604 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD 11>, <&cpg CPG_CORE R9A09G077_CLK_PCLKM>;
+			clock-names = "operation", "bus";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		sci4: serial@80006000 {
+			compatible = "renesas,r9a09g077-rsci";
+			reg = <0 0x80006000 0 0x400>;
+			interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 607 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 608 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 609 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD 12>, <&cpg CPG_CORE R9A09G077_CLK_PCLKM>;
+			clock-names = "operation", "bus";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		sci5: serial@81005000 {
+			compatible = "renesas,r9a09g077-rsci";
+			reg = <0 0x81005000 0 0x400>;
+			interrupts = <GIC_SPI 610 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 611 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 612 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 613 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD 600>, <&cpg CPG_CORE R9A09G077_CLK_PCLKM>;
+			clock-names = "operation", "bus";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt0: watchdog@80082000 {
+			compatible = "renesas,r9a09g077-wdt";
+			reg = <0 0x80082000 0 0x400>,
+			      <0 0x81295100 0 0x04>;
+			clocks = <&cpg CPG_CORE R9A09G077_CLK_PCLKL>;
+			clock-names = "pclk";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt1: watchdog@80082400 {
+			compatible = "renesas,r9a09g077-wdt";
+			reg = <0 0x80082400 0 0x400>,
+			      <0 0x81295104 0 0x04>;
+			clocks = <&cpg CPG_CORE R9A09G077_CLK_PCLKL>;
+			clock-names = "pclk";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt2: watchdog@80082800 {
+			compatible = "renesas,r9a09g077-wdt";
+			reg = <0 0x80082800 0 0x400>,
+			      <0 0x81295108 0 0x04>;
+			clocks = <&cpg CPG_CORE R9A09G077_CLK_PCLKL>;
+			clock-names = "pclk";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt3: watchdog@80082c00 {
+			compatible = "renesas,r9a09g077-wdt";
+			reg = <0 0x80082c00 0 0x400>,
+			      <0 0x8129510c 0 0x04>;
+			clocks = <&cpg CPG_CORE R9A09G077_CLK_PCLKL>;
+			clock-names = "pclk";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt4: watchdog@80083000 {
+			compatible = "renesas,r9a09g077-wdt";
+			reg = <0 0x80083000 0 0x400>,
+			      <0 0x81295110 0 0x04>;
+			clocks = <&cpg CPG_CORE R9A09G077_CLK_PCLKL>;
+			clock-names = "pclk";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt5: watchdog@80083400 {
+			compatible = "renesas,r9a09g077-wdt";
+			reg = <0 0x80083400 0 0x400>,
+			      <0 0x81295114 0 0x04>;
+			clocks = <&cpg CPG_CORE R9A09G077_CLK_PCLKL>;
+			clock-names = "pclk";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@80088000 {
+			compatible = "renesas,riic-r9a09g077";
+			reg = <0 0x80088000 0 0x400>;
+			interrupts = <GIC_SPI 614 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 615 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 616 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 617 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eei", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD 100>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@80088400 {
+			compatible = "renesas,riic-r9a09g077";
+			reg = <0 0x80088400 0 0x400>;
+			interrupts = <GIC_SPI 618 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 619 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 620 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 621 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eei", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD 101>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@81008000 {
+			compatible = "renesas,riic-r9a09g077";
+			reg = <0 0x81008000 0 0x400>;
+			interrupts = <GIC_SPI 622 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 623 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 624 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 625 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eei", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD 601>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@80280000 {
+			compatible = "renesas,r9a09g077-cpg-mssr";
+			reg = <0 0x80280000 0 0x1000>,
+			      <0 0x81280000 0 0x9000>;
+			clocks = <&extal_clk>;
+			clock-names = "extal";
+			#clock-cells = <2>;
+			#reset-cells = <1>;
+			#power-domain-cells = <0>;
+		};
+
+		pinctrl: pinctrl@802c0000 {
+			compatible = "renesas,r9a09g077-pinctrl";
+			reg = <0 0x802c0000 0 0x10000>,
+			      <0 0x812c0000 0 0x10000>,
+			      <0 0x802b0000 0 0x10000>;
+			reg-names = "nsr", "srs", "srn";
+			clocks = <&cpg CPG_CORE R9A09G077_CLK_PCLKM>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 288>;
+			power-domains = <&cpg>;
+		};
+
+		gic: interrupt-controller@83000000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x83000000 0 0x40000>,
+			      <0x0 0x83040000 0 0x160000>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+		};
+
+		ohci: usb@92040000 {
+			compatible = "generic-ohci";
+			reg = <0 0x92040000 0 0x100>;
+			interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 408>;
+			phys = <&usb2_phy 1>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ehci: usb@92040100 {
+			compatible = "generic-ehci";
+			reg = <0 0x92040100 0 0x100>;
+			interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 408>;
+			phys = <&usb2_phy 2>;
+			phy-names = "usb";
+			companion = <&ohci>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		usb2_phy: usb-phy@92040200 {
+			compatible = "renesas,usb2-phy-r9a09g077";
+			reg = <0 0x92040200 0 0x700>;
+			interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 408>,
+				 <&cpg CPG_CORE R9A09G077_USB_CLK>;
+			#phy-cells = <1>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		hsusb: usb@92041000 {
+			compatible = "renesas,usbhs-r9a09g077";
+			reg = <0 0x92041000 0 0x1000>;
+			interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 408>;
+			phys = <&usb2_phy 3>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		sdhi0: mmc@92080000  {
+			compatible = "renesas,sdhi-r9a09g077",
+				     "renesas,sdhi-r9a09g057";
+			reg = <0x0 0x92080000 0 0x10000>;
+			interrupts = <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 783 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1212>,
+				 <&cpg CPG_CORE R9A09G077_SDHI_CLKHS>;
+			clock-names = "aclk", "clkh";
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			sdhi0_vqmmc: vqmmc-regulator {
+				regulator-name = "SDHI0-VQMMC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				status = "disabled";
+			};
+		};
+
+		sdhi1: mmc@92090000 {
+			compatible = "renesas,sdhi-r9a09g077",
+				     "renesas,sdhi-r9a09g057";
+			reg = <0x0 0x92090000 0 0x10000>;
+			interrupts = <GIC_SPI 784 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1213>,
+				 <&cpg CPG_CORE R9A09G077_SDHI_CLKHS>;
+			clock-names = "aclk", "clkh";
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			sdhi1_vqmmc: vqmmc-regulator {
+				regulator-name = "SDHI1-VQMMC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				status = "disabled";
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt";
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dts b/arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dts
new file mode 100644
index 000000000000..2bf867273ad0
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a09g077m44-rzt2h-evk.dts
@@ -0,0 +1,184 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/T2H EVK board
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+
+#include "r9a09g077m44.dtsi"
+
+/*
+ * SD0 can be connected to either eMMC (IC49) or SD card slot CN31
+ * Lets by default enable the eMMC, note we need the below SW settings
+ * for eMMC.
+ * SW2[1] = ON; SW2[2] = ON
+ *
+ * To enable SD card and disable eMMC on SDHI0 disable the below macro
+ * and set the below switch setting:
+ * SW2[1] = OFF; SW2[2] = ON
+ */
+#define SD0_EMMC	1
+#define SD0_SD		(!SD0_EMMC)
+
+/*
+ * P17_4 = SD1_CD; SW2[3] = ON
+ * P08_5 = SD1_PWEN; SW2[3] = ON
+ * P08_6 = SD1_IOVS; SW2[3] = ON; SW5[3] = OFF; SW5[4] = ON
+ */
+#define SD1_MICRO_SD	1
+
+/*
+ * USB Pin Configuration:
+ *
+ * This board is equipped with three USB connectors: Type-A (CN80), Mini-B
+ * (CN79), and Micro-AB (CN33). The RZ/T2H SoC has a single USB channel, so
+ * either the USB host interface or the USB function interface can be used,
+ * but not both simultaneously when using the CN79 and CN80 connectors.
+ *
+ * By default, the Type-A (CN80) and Mini-B (CN79) connectors are enabled.
+ * Configure the switches as follows:
+ *   - P00_0 - P00_2 (control signals for USB power supply): SW1[5] = ON
+ *   - USB_VBUSIN (used for USB function): SW7[7] = OFF; SW7[8] = ON
+ *   - USB_VBUSEN (used for USB_HF_VBUSEN): SW7[9] = OFF; SW7[10] = ON
+ *
+ * To enable the Micro-AB (CN33) USB OTG connector, set the following macro
+ * to 1 and configure the switches as follows:
+ *   - P00_0 - P00_2 (control signals for USB power supply): SW1[5] = ON
+ *   - USB_VBUSIN (used for USB OTG): SW7[7] = ON; SW7[8] = OFF
+ *   - USB_VBUSEN (used for USB_OTG_VBUSEN): SW7[9] = ON; SW7[10] = OFF
+ */
+#define USB_OTG		0
+
+#include "rzt2h-n2h-evk-common.dtsi"
+
+/ {
+	model = "Renesas RZ/T2H EVK Board based on r9a09g077m44";
+	compatible = "renesas,rzt2h-evk", "renesas,r9a09g077m44", "renesas,r9a09g077";
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			/* SW8-9: ON, SW8-10: OFF */
+			gpios = <&pinctrl RZT2H_GPIO(23, 1) GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <0>;
+		};
+
+		led-1 {
+			/* SW5-1: OFF, SW5-2: ON */
+			gpios = <&pinctrl RZT2H_GPIO(32, 2) GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+		};
+
+		led-2 {
+			gpios = <&pinctrl RZT2H_GPIO(6, 7) GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_YELLOW>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+		};
+
+#if (!SD1_MICRO_SD)
+		led-3 {
+			/* SW2-3: OFF */
+			gpios = <&pinctrl RZT2H_GPIO(8, 5) GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <3>;
+		};
+#endif
+
+		led-4 {
+			/* SW8-3: ON, SW8-4: OFF */
+			gpios = <&pinctrl RZT2H_GPIO(18, 0) GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <4>;
+		};
+
+		led-5 {
+			/* SW8-1: ON, SW8-2: OFF */
+			gpios = <&pinctrl RZT2H_GPIO(18, 1) GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <5>;
+		};
+
+		led-6 {
+			/* SW5-9: OFF, SW5-10: ON */
+			gpios = <&pinctrl RZT2H_GPIO(22, 7) GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <6>;
+		};
+
+		led-7 {
+			/* SW5-7: OFF, SW5-8: ON */
+			gpios = <&pinctrl RZT2H_GPIO(23, 0) GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <7>;
+		};
+
+		led-8 {
+			/* SW7-5: OFF, SW7-6: ON */
+			gpios = <&pinctrl RZT2H_GPIO(23, 5) GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <8>;
+		};
+	};
+};
+
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&pinctrl {
+	/*
+	 * I2C0 Pin Configuration:
+	 * ------------------------
+	 * Signal | Pin     | SW6
+	 * -------|---------|--------------
+	 * SCL    | P23_3   | 7: ON, 8: OFF
+	 * SDA    | P23_4   | 9: ON, 10: OFF
+	 */
+	i2c0_pins: i2c0-pins {
+		pinmux = <RZT2H_PORT_PINMUX(23, 3, 0x17)>,
+			 <RZT2H_PORT_PINMUX(23, 4, 0x17)>;
+	};
+
+	i2c1_pins: i2c1-pins {
+		pinmux = <RZT2H_PORT_PINMUX(5, 0, 0x17)>, /* SDA */
+			 <RZT2H_PORT_PINMUX(4, 7, 0x17)>; /* SCL */
+	};
+
+#if USB_OTG
+	usb-exicen-hog {
+		gpio-hog;
+		gpios = <RZT2H_GPIO(0, 2) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "usb_exicen_a";
+	};
+#endif
+
+	usb_pins: usb-pins {
+		pinmux = <RZT2H_PORT_PINMUX(0, 0, 0x13)>, /* VBUSEN */
+			 <RZT2H_PORT_PINMUX(0, 1, 0x13)>; /* OVRCUR */
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a09g077m44.dtsi b/arch/arm64/boot/dts/renesas/r9a09g077m44.dtsi
new file mode 100644
index 000000000000..6f4a11b39d12
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a09g077m44.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/T2H 4-core SoC
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a09g077.dtsi"
+
+/ {
+	compatible = "renesas,r9a09g077m44", "renesas,r9a09g077";
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a09g087.dtsi b/arch/arm64/boot/dts/renesas/r9a09g087.dtsi
new file mode 100644
index 000000000000..f06c19c73adb
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a09g087.dtsi
@@ -0,0 +1,399 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/N2H SoC
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/clock/renesas,r9a09g087-cpg-mssr.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	compatible = "renesas,r9a09g087";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a55";
+			reg = <0>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+		};
+
+		cpu1: cpu@100 {
+			compatible = "arm,cortex-a55";
+			reg = <0x100>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+		};
+
+		cpu2: cpu@200 {
+			compatible = "arm,cortex-a55";
+			reg = <0x200>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+		};
+
+		cpu3: cpu@300 {
+			compatible = "arm,cortex-a55";
+			reg = <0x300>;
+			device_type = "cpu";
+			next-level-cache = <&L3_CA55>;
+			enable-method = "psci";
+		};
+
+		L3_CA55: cache-controller-0 {
+			compatible = "cache";
+			cache-unified;
+			cache-size = <0x100000>;
+			cache-level = <3>;
+		};
+	};
+
+	extal_clk: extal {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		/* This value must be overridden by the board */
+		clock-frequency = <0>;
+	};
+
+	psci {
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
+		method = "smc";
+	};
+
+	soc: soc {
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		sci0: serial@80005000 {
+			compatible = "renesas,r9a09g087-rsci", "renesas,r9a09g077-rsci";
+			reg = <0 0x80005000 0 0x400>;
+			interrupts = <GIC_SPI 590 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 591 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 592 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 593 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD 8>, <&cpg CPG_CORE R9A09G087_CLK_PCLKM>;
+			clock-names = "operation", "bus";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		sci1: serial@80005400 {
+			compatible = "renesas,r9a09g087-rsci", "renesas,r9a09g077-rsci";
+			reg = <0 0x80005400 0 0x400>;
+			interrupts = <GIC_SPI 594 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 595 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 596 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 597 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD 9>, <&cpg CPG_CORE R9A09G087_CLK_PCLKM>;
+			clock-names = "operation", "bus";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		sci2: serial@80005800 {
+			compatible = "renesas,r9a09g087-rsci", "renesas,r9a09g077-rsci";
+			reg = <0 0x80005800 0 0x400>;
+			interrupts = <GIC_SPI 598 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 599 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 600 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 601 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD 10>, <&cpg CPG_CORE R9A09G087_CLK_PCLKM>;
+			clock-names = "operation", "bus";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		sci3: serial@80005c00 {
+			compatible = "renesas,r9a09g087-rsci", "renesas,r9a09g077-rsci";
+			reg = <0 0x80005c00 0 0x400>;
+			interrupts = <GIC_SPI 602 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 603 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 604 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 605 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD 11>, <&cpg CPG_CORE R9A09G087_CLK_PCLKM>;
+			clock-names = "operation", "bus";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		sci4: serial@80006000 {
+			compatible = "renesas,r9a09g087-rsci", "renesas,r9a09g077-rsci";
+			reg = <0 0x80006000 0 0x400>;
+			interrupts = <GIC_SPI 606 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 607 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 608 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 609 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD 12>, <&cpg CPG_CORE R9A09G087_CLK_PCLKM>;
+			clock-names = "operation", "bus";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		sci5: serial@81005000 {
+			compatible = "renesas,r9a09g087-rsci", "renesas,r9a09g077-rsci";
+			reg = <0 0x81005000 0 0x400>;
+			interrupts = <GIC_SPI 610 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 611 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 612 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 613 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eri", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD 600>, <&cpg CPG_CORE R9A09G087_CLK_PCLKM>;
+			clock-names = "operation", "bus";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt0: watchdog@80082000 {
+			compatible = "renesas,r9a09g087-wdt", "renesas,r9a09g077-wdt";
+			reg = <0 0x80082000 0 0x400>,
+			      <0 0x81295100 0 0x04>;
+			clocks = <&cpg CPG_CORE R9A09G087_CLK_PCLKL>;
+			clock-names = "pclk";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt1: watchdog@80082400 {
+			compatible = "renesas,r9a09g087-wdt", "renesas,r9a09g077-wdt";
+			reg = <0 0x80082400 0 0x400>,
+			      <0 0x81295104 0 0x04>;
+			clocks = <&cpg CPG_CORE R9A09G087_CLK_PCLKL>;
+			clock-names = "pclk";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt2: watchdog@80082800 {
+			compatible = "renesas,r9a09g087-wdt", "renesas,r9a09g077-wdt";
+			reg = <0 0x80082800 0 0x400>,
+			      <0 0x81295108 0 0x04>;
+			clocks = <&cpg CPG_CORE R9A09G087_CLK_PCLKL>;
+			clock-names = "pclk";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt3: watchdog@80082c00 {
+			compatible = "renesas,r9a09g087-wdt", "renesas,r9a09g077-wdt";
+			reg = <0 0x80082c00 0 0x400>,
+			      <0 0x8129510c 0 0x04>;
+			clocks = <&cpg CPG_CORE R9A09G087_CLK_PCLKL>;
+			clock-names = "pclk";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt4: watchdog@80083000 {
+			compatible = "renesas,r9a09g087-wdt", "renesas,r9a09g077-wdt";
+			reg = <0 0x80083000 0 0x400>,
+			      <0 0x81295110 0 0x04>;
+			clocks = <&cpg CPG_CORE R9A09G087_CLK_PCLKL>;
+			clock-names = "pclk";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		wdt5: watchdog@80083400 {
+			compatible = "renesas,r9a09g087-wdt", "renesas,r9a09g077-wdt";
+			reg = <0 0x80083400 0 0x400>,
+			      <0 0x81295114 0 0x04>;
+			clocks = <&cpg CPG_CORE R9A09G087_CLK_PCLKL>;
+			clock-names = "pclk";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		i2c0: i2c@80088000 {
+			compatible = "renesas,riic-r9a09g087", "renesas,riic-r9a09g077";
+			reg = <0 0x80088000 0 0x400>;
+			interrupts = <GIC_SPI 614 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 615 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 616 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 617 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eei", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD 100>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c1: i2c@80088400 {
+			compatible = "renesas,riic-r9a09g087", "renesas,riic-r9a09g077";
+			reg = <0 0x80088400 0 0x400>;
+			interrupts = <GIC_SPI 618 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 619 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 620 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 621 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eei", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD 101>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		i2c2: i2c@81008000 {
+			compatible = "renesas,riic-r9a09g087", "renesas,riic-r9a09g077";
+			reg = <0 0x81008000 0 0x400>;
+			interrupts = <GIC_SPI 622 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 623 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 624 IRQ_TYPE_EDGE_RISING>,
+				     <GIC_SPI 625 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "eei", "rxi", "txi", "tei";
+			clocks = <&cpg CPG_MOD 601>;
+			power-domains = <&cpg>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+			status = "disabled";
+		};
+
+		cpg: clock-controller@80280000 {
+			compatible = "renesas,r9a09g087-cpg-mssr";
+			reg = <0 0x80280000 0 0x1000>,
+			      <0 0x81280000 0 0x9000>;
+			clocks = <&extal_clk>;
+			clock-names = "extal";
+			#clock-cells = <2>;
+			#reset-cells = <1>;
+			#power-domain-cells = <0>;
+		};
+
+		pinctrl: pinctrl@802c0000 {
+			compatible = "renesas,r9a09g087-pinctrl";
+			reg = <0 0x802c0000 0 0x10000>,
+			      <0 0x812c0000 0 0x10000>,
+			      <0 0x802b0000 0 0x10000>;
+			reg-names = "nsr", "srs", "srn";
+			clocks = <&cpg CPG_CORE R9A09G087_CLK_PCLKM>;
+			gpio-controller;
+			#gpio-cells = <2>;
+			gpio-ranges = <&pinctrl 0 0 280>;
+			power-domains = <&cpg>;
+		};
+
+		gic: interrupt-controller@83000000 {
+			compatible = "arm,gic-v3";
+			reg = <0x0 0x83000000 0 0x40000>,
+			      <0x0 0x83040000 0 0x160000>;
+			#interrupt-cells = <3>;
+			#address-cells = <0>;
+			interrupt-controller;
+			interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_LOW>;
+		};
+
+		ohci: usb@92040000 {
+			compatible = "generic-ohci";
+			reg = <0 0x92040000 0 0x100>;
+			interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 408>;
+			phys = <&usb2_phy 1>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		ehci: usb@92040100 {
+			compatible = "generic-ehci";
+			reg = <0 0x92040100 0 0x100>;
+			interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 408>;
+			phys = <&usb2_phy 2>;
+			phy-names = "usb";
+			companion = <&ohci>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		usb2_phy: usb-phy@92040200 {
+			compatible = "renesas,usb2-phy-r9a09g087", "renesas,usb2-phy-r9a09g077";
+			reg = <0 0x92040200 0 0x700>;
+			interrupts = <GIC_SPI 586 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 408>,
+				 <&cpg CPG_CORE R9A09G087_USB_CLK>;
+			#phy-cells = <1>;
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		hsusb: usb@92041000 {
+			compatible = "renesas,usbhs-r9a09g087", "renesas,usbhs-r9a09g077";
+			reg = <0 0x92041000 0 0x1000>;
+			interrupts = <GIC_SPI 587 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 588 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 589 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 408>;
+			phys = <&usb2_phy 3>;
+			phy-names = "usb";
+			power-domains = <&cpg>;
+			status = "disabled";
+		};
+
+		sdhi0: mmc@92080000  {
+			compatible = "renesas,sdhi-r9a09g087",
+				     "renesas,sdhi-r9a09g057";
+			reg = <0x0 0x92080000 0 0x10000>;
+			interrupts = <GIC_SPI 782 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 783 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1212>,
+				 <&cpg CPG_CORE R9A09G087_SDHI_CLKHS>;
+			clock-names = "aclk", "clkh";
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			sdhi0_vqmmc: vqmmc-regulator {
+				regulator-name = "SDHI0-VQMMC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				status = "disabled";
+			};
+		};
+
+		sdhi1: mmc@92090000 {
+			compatible = "renesas,sdhi-r9a09g087",
+				     "renesas,sdhi-r9a09g057";
+			reg = <0x0 0x92090000 0 0x10000>;
+			interrupts = <GIC_SPI 784 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 785 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 1213>,
+				 <&cpg CPG_CORE R9A09G087_SDHI_CLKHS>;
+			clock-names = "aclk", "clkh";
+			power-domains = <&cpg>;
+			status = "disabled";
+
+			sdhi1_vqmmc: vqmmc-regulator {
+				regulator-name = "SDHI1-VQMMC";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				status = "disabled";
+			};
+		};
+	};
+
+	timer {
+		compatible = "arm,armv8-timer";
+		interrupts-extended = <&gic GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>,
+				      <&gic GIC_PPI 12 IRQ_TYPE_LEVEL_LOW>;
+		interrupt-names = "sec-phys", "phys", "virt", "hyp-phys", "hyp-virt";
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a09g087m44-rzn2h-evk.dts b/arch/arm64/boot/dts/renesas/r9a09g087m44-rzn2h-evk.dts
new file mode 100644
index 000000000000..084b3a0c8052
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a09g087m44-rzn2h-evk.dts
@@ -0,0 +1,229 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/N2H EVK board
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+
+#include "r9a09g087m44.dtsi"
+
+/*
+ * SD0 can be connected to either eMMC (U33) or SD card slot CN21
+ * Lets by default enable the eMMC, note we need the below SW settings
+ * for eMMC.
+ * DSW5[1] = ON; DSW5[2] = ON
+ * DSW17[5] = OFF; DSW17[6] = ON
+ *
+ * To enable SD card and disable eMMC on SDHI0 disable the below macro
+ * and set the below switch setting:
+ * DSW5[1] = OFF; DSW5[2] = ON
+ * P22_6 = SD0_WP; DSW15[1] = OFF; DSW15[2] = ON
+ * P22_5 = SD0_CD; DSW15[3] = OFF; DSW15[4] = ON
+ * P02_6 = SD0_IOVS; DSW17[5] = OFF; DSW17[6] = ON
+ * P02_5 = SD0_PWEN; DSW17[7] = OFF; DSW17[8] = ON
+ */
+#define SD0_EMMC       1
+#define SD0_SD		(!SD0_EMMC)
+
+/*
+ * P17_4 = SD1_CD; DSW5[3] = ON; DSW19[1] = OFF; DSW19[2] = ON
+ * P08_6 = SD1_IOVS; DSW5[3] = ON
+ */
+#define SD1_MICRO_SD	1
+
+/*
+ * USB Pin Configuration:
+ *
+ * This board is equipped with three USB connectors: Type-A (CN7), Mini-B
+ * (CN8), and Micro-AB (CN9). The RZ/N2H SoC has a single USB channel, so
+ * either the USB host interface or the USB function interface can be used,
+ * but not both simultaneously when using the CN7 and CN8 connectors.
+ *
+ * By default, the Type-A (CN7) and Mini-B (CN8) connectors are enabled.
+ * Configure the switches as follows:
+ *   - P02_2 - P02_3 (control signals for USB power supply): DSW2[6] = OFF;
+ *     - P02_2 (used for VBUSEN): DSW14[5] = OFF; DSW14[6] = ON
+ *     - P02_3 (used for USB_OVRCUR): DSW14[1] = OFF; DSW14[2] = ON
+ *   - USB_VBUSIN (used for VBUS of CN8): DSW16[1] = OFF; DSW16[2] = ON
+ *   - USB_VBUSEN (used for USB_HF_VBUSEN): DSW16[3] = OFF; DSW16[4] = ON
+ *
+ * To enable the Micro-AB (CN9) USB OTG connector, set the following macro
+ * to 1 and configure the switches as follows:
+ *   - P02_2 - P02_3 (control signals for USB power supply): DSW2[6] = OFF;
+ *     - P02_2 (used for VBUSEN): DSW14[5] = OFF; DSW14[6] = ON
+ *     - P02_3 (used for USB_OVRCUR): DSW14[1] = OFF; DSW14[2] = ON
+ *   - USB_VBUSIN (used for VBUS for OTG): DSW16[1] = ON; DSW16[2] = OFF
+ *   - USB_VBUSEN (used for USB_OTG_VBUSEN): DSW16[3] = ON; DSW16[4] = OFF
+ *   - USB_EXICEN (used for USB OTG EXICEN): DSW14[3] = OFF; DSW14[4] = ON
+ */
+#define USB_OTG		0
+
+#include "rzt2h-n2h-evk-common.dtsi"
+
+/*
+ * I2C0 and LED8/9 share the same pins use the below
+ * macro to choose (and set approopriate DIP switches).
+ */
+#define I2C0	1
+#define LED8	(!I2C0)
+#define LED9	(!I2C0)
+
+/ {
+	model = "Renesas RZ/N2H EVK Board based on r9a09g087m44";
+	compatible = "renesas,rzn2h-evk", "renesas,r9a09g087m44", "renesas,r9a09g087";
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-3 {
+			/* DSW18-7: ON, DSW18-8: OFF */
+			gpios = <&pinctrl RZT2H_GPIO(31, 6) GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <4>;
+		};
+
+		led-4 {
+			/* DSW18-9: ON, DSW18-10: OFF */
+			gpios = <&pinctrl RZT2H_GPIO(18, 1) GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <5>;
+		};
+
+		led-5 {
+			/* DSW18-1: ON, DSW18-2: OFF */
+			gpios = <&pinctrl RZT2H_GPIO(22, 7) GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <6>;
+		};
+
+		led-6 {
+			/* DSW18-3: ON, DSW18-4: OFF */
+			gpios = <&pinctrl RZT2H_GPIO(23, 0) GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <7>;
+		};
+
+		led-7 {
+			/*
+			 * DSW18-5: ON, DSW18-6: OFF
+			 * DSW19-3: OFF, DSW19-4: ON
+			 */
+			gpios = <&pinctrl RZT2H_GPIO(14, 3) GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <8>;
+		};
+
+#if LED8
+		led-8 {
+			/*
+			 * USER_LED0
+			 * DSW15-8: OFF, DSW15-9: OFF, DSW15-10: ON
+			 */
+			gpios = <&pinctrl RZT2H_GPIO(14, 6) GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <0>;
+		};
+#endif
+
+#if LED9
+		led-9 {
+			/*
+			 * USER_LED1
+			 * DSW15-5: OFF, DSW15-6: ON
+			 */
+			gpios = <&pinctrl RZT2H_GPIO(14, 7) GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <1>;
+		};
+#endif
+
+		led-10 {
+			/*
+			 * USER_LED2
+			 * DSW17-3: OFF, DSW17-4: ON
+			 */
+			gpios = <&pinctrl RZT2H_GPIO(2, 7) GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_YELLOW>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <2>;
+		};
+
+		led-11 {
+			/*
+			 * USER_LED3
+			 * DSW17-1: OFF, DSW17-2: ON
+			 */
+			gpios = <&pinctrl RZT2H_GPIO(3, 0) GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_RED>;
+			function = LED_FUNCTION_DEBUG;
+			function-enumerator = <3>;
+		};
+	};
+};
+
+#if I2C0
+&i2c0 {
+	pinctrl-0 = <&i2c0_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	status = "okay";
+};
+#endif
+
+&i2c1 {
+	pinctrl-0 = <&i2c1_pins>;
+	pinctrl-names = "default";
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&pinctrl {
+	/*
+	 * I2C0 Pin Configuration:
+	 * ------------------------
+	 * Signal | Pin     | DSW15
+	 * -------|---------|--------------
+	 * SCL    | P14_6   | 8: OFF, 9: ON, 10: OFF
+	 * SDA    | P14_7   | 5: ON, 6: OFF
+	 */
+	i2c0_pins: i2c0-pins {
+		pinmux = <RZT2H_PORT_PINMUX(14, 6, 0x17)>,
+			 <RZT2H_PORT_PINMUX(14, 7, 0x17)>;
+	};
+
+	/*
+	 * I2C1 Pin Configuration:
+	 * ------------------------
+	 * Signal | Pin     | DSW7
+	 * -------|---------|--------------
+	 * SCL    | P03_3   | 1: ON, 2: OFF
+	 * SDA    | P03_4   | 3: ON, 4: OFF
+	 */
+	i2c1_pins: i2c1-pins {
+		pinmux = <RZT2H_PORT_PINMUX(3, 3, 0x17)>,
+			 <RZT2H_PORT_PINMUX(3, 4, 0x17)>;
+	};
+
+#if USB_OTG
+	usb-exicen-hog {
+		gpio-hog;
+		gpios = <RZT2H_GPIO(2, 4) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "usb_exicen_a";
+	};
+#endif
+
+	usb_pins: usb-pins {
+		pinmux = <RZT2H_PORT_PINMUX(2, 2, 0x13)>, /* VBUSEN */
+			 <RZT2H_PORT_PINMUX(2, 3, 0x13)>; /* OVRCUR */
+	};
+};
diff --git a/arch/arm64/boot/dts/renesas/r9a09g087m44.dtsi b/arch/arm64/boot/dts/renesas/r9a09g087m44.dtsi
new file mode 100644
index 000000000000..ef0343b53309
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/r9a09g087m44.dtsi
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Device Tree Source for the RZ/N2H 4-core SoC
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r9a09g087.dtsi"
+
+/ {
+	compatible = "renesas,r9a09g087m44", "renesas,r9a09g087";
+};
diff --git a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
index 345b779e4f60..f3d7eff0d2f2 100644
--- a/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
+++ b/arch/arm64/boot/dts/renesas/rzg2lc-smarc.dtsi
@@ -48,7 +48,10 @@
 #if (SW_SCIF_CAN || SW_RSPI_CAN)
 &canfd {
 	pinctrl-0 = <&can1_pins>;
-	/delete-node/ channel@0;
+
+	channel0 {
+		status = "disabled";
+	};
 };
 #else
 &canfd {
diff --git a/arch/arm64/boot/dts/renesas/rzt2h-n2h-evk-common.dtsi b/arch/arm64/boot/dts/renesas/rzt2h-n2h-evk-common.dtsi
new file mode 100644
index 000000000000..5c91002c99c4
--- /dev/null
+++ b/arch/arm64/boot/dts/renesas/rzt2h-n2h-evk-common.dtsi
@@ -0,0 +1,246 @@
+// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+/*
+ * Common Device Tree Source for the RZ/T2H and RZ/N2H EVK boards.
+ *
+ * Copyright (C) 2025 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/renesas,r9a09g077-pinctrl.h>
+
+/ {
+	aliases {
+		i2c0 = &i2c0;
+		i2c1 = &i2c1;
+		mmc0 = &sdhi0;
+		mmc1 = &sdhi1;
+		serial0 = &sci0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator-3p3v {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+#if SD0_SD
+	vqmmc_sdhi0: regulator-vqmmc-sdhi0 {
+		compatible = "regulator-gpio";
+		regulator-name = "SDHI0 VqmmC";
+		gpios = <&pinctrl RZT2H_GPIO(2, 6) GPIO_ACTIVE_HIGH>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios-states = <0>;
+		states = <3300000 0>, <1800000 1>;
+	};
+#endif
+
+#if SD1_MICRO_SD
+	vccq_sdhi1: regulator-vccq-sdhi1 {
+		compatible = "regulator-gpio";
+		regulator-name = "SDHI1 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		gpios = <&pinctrl RZT2H_GPIO(8, 6) GPIO_ACTIVE_HIGH>;
+		gpios-states = <0>;
+		states = <3300000 0>, <1800000 1>;
+	};
+#endif
+};
+
+&ehci {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <25000000>;
+};
+
+&hsusb {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&i2c0 {
+	eeprom: eeprom@50 {
+		compatible = "renesas,r1ex24016", "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+	};
+};
+
+&ohci {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&pinctrl {
+	/*
+	 * SCI0 Pin Configuration:
+	 * ------------------------
+	 * Signal     | Pin     | RZ/T2H (SW4) | RZ/N2H (DSW9)
+	 * -----------|---------|--------------|---------------
+	 * SCI0_RXD   | P27_4   | 5: ON, 6: OFF| 1: ON, 2: OFF
+	 * SCI0_TXD   | P27_5   | 7: ON, 8: OFF| 3: ON, 4: OFF
+	 */
+	sci0_pins: sci0-pins {
+		pinmux = <RZT2H_PORT_PINMUX(27, 4, 0x14)>,
+			 <RZT2H_PORT_PINMUX(27, 5, 0x14)>;
+	};
+
+#if SD0_EMMC
+	sdhi0-emmc-iovs-hog {
+		gpio-hog;
+		gpios = <RZT2H_GPIO(2, 6) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SD0_IOVS";
+	};
+#endif
+
+	sdhi0_emmc_pins: sd0-emmc-group {
+		data-pins {
+			pinmux = <RZT2H_PORT_PINMUX(12, 2, 0x29)>, /* SD0_DATA0 */
+				 <RZT2H_PORT_PINMUX(12, 3, 0x29)>, /* SD0_DATA1 */
+				 <RZT2H_PORT_PINMUX(12, 4, 0x29)>, /* SD0_DATA2 */
+				 <RZT2H_PORT_PINMUX(12, 5, 0x29)>, /* SD0_DATA3 */
+				 <RZT2H_PORT_PINMUX(12, 6, 0x29)>, /* SD0_DATA4 */
+				 <RZT2H_PORT_PINMUX(12, 7, 0x29)>, /* SD0_DATA5 */
+				 <RZT2H_PORT_PINMUX(13, 0, 0x29)>, /* SD0_DATA6 */
+				 <RZT2H_PORT_PINMUX(13, 1, 0x29)>; /* SD0_DATA7 */
+		};
+
+		ctrl-pins {
+			pinmux = <RZT2H_PORT_PINMUX(12, 0, 0x29)>, /* SD0_CLK */
+				 <RZT2H_PORT_PINMUX(12, 1, 0x29)>, /* SD0_CMD */
+				 <RZT2H_PORT_PINMUX(13, 2, 0x29)>; /* SD0_RST# */
+		};
+	};
+
+#if SD0_SD
+	sdhi0-pwen-hog {
+		gpio-hog;
+		gpios = <RZT2H_GPIO(2, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SD0_PWEN";
+	};
+#endif
+
+	sdhi0_sd_pins: sd0-sd-group {
+		data-pins {
+			pinmux = <RZT2H_PORT_PINMUX(12, 2, 0x29)>, /* SD0_DATA0 */
+				 <RZT2H_PORT_PINMUX(12, 3, 0x29)>, /* SD0_DATA1 */
+				 <RZT2H_PORT_PINMUX(12, 4, 0x29)>, /* SD0_DATA2 */
+				 <RZT2H_PORT_PINMUX(12, 5, 0x29)>; /* SD0_DATA3 */
+		};
+
+		ctrl-pins {
+			pinmux = <RZT2H_PORT_PINMUX(12, 0, 0x29)>, /* SD0_CLK */
+				 <RZT2H_PORT_PINMUX(12, 1, 0x29)>, /* SD0_CMD */
+				 <RZT2H_PORT_PINMUX(22, 5, 0x29)>, /* SD0_CD */
+				 <RZT2H_PORT_PINMUX(22, 6, 0x29)>; /* SD0_WP */
+		};
+	};
+
+#if SD1_MICRO_SD
+	sdhi1-pwen-hog {
+		gpio-hog;
+		gpios = <RZT2H_GPIO(8, 5) GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "SD1_PWEN";
+	};
+#endif
+
+	sdhi1_pins: sd1-group {
+		data-pins {
+			pinmux = <RZT2H_PORT_PINMUX(16, 7, 0x29)>, /* SD1_DATA0 */
+				 <RZT2H_PORT_PINMUX(17, 0, 0x29)>, /* SD1_DATA1 */
+				 <RZT2H_PORT_PINMUX(17, 1, 0x29)>, /* SD1_DATA2 */
+				 <RZT2H_PORT_PINMUX(17, 2, 0x29)>; /* SD1_DATA3 */
+		};
+
+		ctrl-pins {
+			pinmux = <RZT2H_PORT_PINMUX(16, 5, 0x29)>, /* SD1_CLK */
+				 <RZT2H_PORT_PINMUX(16, 6, 0x29)>, /* SD1_CMD */
+				 <RZT2H_PORT_PINMUX(17, 4, 0x29)>; /* SD1_CD */
+		};
+	};
+};
+
+&sci0 {
+	pinctrl-0 = <&sci0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+#if SD0_EMMC
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_emmc_pins>;
+	pinctrl-1 = <&sdhi0_emmc_pins>;
+	pinctrl-names = "default", "state_uhs";
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	non-removable;
+	mmc-hs200-1_8v;
+	fixed-emmc-driver-type = <1>;
+	status = "okay";
+};
+#endif
+
+#if SD0_SD
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_sd_pins>;
+	pinctrl-1 = <&sdhi0_sd_pins>;
+	pinctrl-names = "default", "state_uhs";
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&vqmmc_sdhi0>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+#endif
+
+#if SD1_MICRO_SD
+&sdhi1 {
+	pinctrl-0 = <&sdhi1_pins>;
+	pinctrl-1 = <&sdhi1_pins>;
+	pinctrl-names = "default", "state_uhs";
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&vccq_sdhi1>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+#endif
+
+&usb2_phy {
+	pinctrl-0 = <&usb_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&wdt2 {
+	status = "okay";
+	timeout-sec = <60>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 099520962ffb..ad684e3831bc 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -89,7 +89,11 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rockpro64-screen.dtbo
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-sapphire-excavator.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399pro-rock-pi-n10.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-armsom-sige1.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-nanopi-zero2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-radxa-e20c.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-rock-2a.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3528-rock-2f.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3562-evb2-v10.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg-arc-d.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3566-anbernic-rg-arc-s.dtb
@@ -130,6 +134,8 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-bpi-r2-pro.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-fastrhino-r66s.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-fastrhino-r68s.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-hinlink-h66k.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-hinlink-h68k.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-lubancat-2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-mecsbc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5c.dtb
@@ -175,6 +181,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-max.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-plus.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-orangepi-5-ultra.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-quartzpro64.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-roc-rt.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5-itx.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3588-rock-5b-pcie-ep.dtbo
diff --git a/arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi b/arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi
index b4bd4e34747c..192791993f05 100644
--- a/arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi
+++ b/arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi
@@ -72,7 +72,7 @@
 	};
 
 	vcc_cam_avdd: regulator-vcc-cam-avdd {
-		compatible  = "regulator-fixed";
+		compatible = "regulator-fixed";
 		regulator-name = "vcc_cam_avdd";
 		gpio = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
@@ -83,7 +83,7 @@
 	};
 
 	vcc_cam_dovdd: regulator-vcc-cam-dovdd {
-		compatible  = "regulator-fixed";
+		compatible = "regulator-fixed";
 		regulator-name = "vcc_cam_dovdd";
 		gpio = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
@@ -94,7 +94,7 @@
 	};
 
 	vcc_cam_dvdd: regulator-vcc-cam-dvdd {
-		compatible  = "regulator-fixed";
+		compatible = "regulator-fixed";
 		regulator-name = "vcc_cam_dvdd";
 		gpio = <&gpio3 RK_PC5 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
@@ -106,7 +106,7 @@
 	};
 
 	vcc_lens_afvdd: regulator-vcc-lens-afvdd {
-		compatible  = "regulator-fixed";
+		compatible = "regulator-fixed";
 		regulator-name = "vcc_lens_afvdd";
 		gpio = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
 		pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou-video-demo.dtso b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou-video-demo.dtso
index ea5ce919984f..760d5139f95d 100644
--- a/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou-video-demo.dtso
+++ b/arch/arm64/boot/dts/rockchip/px30-ringneck-haikou-video-demo.dtso
@@ -26,7 +26,7 @@
 	};
 
 	cam_afvdd_2v8: regulator-cam-afvdd-2v8 {
-		compatible  = "regulator-fixed";
+		compatible = "regulator-fixed";
 		gpio = <&pca9670 2 GPIO_ACTIVE_LOW>;
 		regulator-max-microvolt = <2800000>;
 		regulator-min-microvolt = <2800000>;
@@ -35,7 +35,7 @@
 	};
 
 	cam_avdd_2v8: regulator-cam-avdd-2v8 {
-		compatible  = "regulator-fixed";
+		compatible = "regulator-fixed";
 		gpio = <&pca9670 4 GPIO_ACTIVE_LOW>;
 		regulator-max-microvolt = <2800000>;
 		regulator-min-microvolt = <2800000>;
@@ -44,7 +44,7 @@
 	};
 
 	cam_dovdd_1v8: regulator-cam-dovdd-1v8 {
-		compatible  = "regulator-fixed";
+		compatible = "regulator-fixed";
 	        gpio = <&pca9670 3 GPIO_ACTIVE_LOW>;
 	        regulator-max-microvolt = <1800000>;
 	        regulator-min-microvolt = <1800000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3308-sakurapi-rk3308b.dts b/arch/arm64/boot/dts/rockchip/rk3308-sakurapi-rk3308b.dts
index f9f633aebb64..e5e6b800c2d1 100644
--- a/arch/arm64/boot/dts/rockchip/rk3308-sakurapi-rk3308b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3308-sakurapi-rk3308b.dts
@@ -260,6 +260,6 @@
 	status = "okay";
 };
 
-&usb_host_ohci{
+&usb_host_ohci {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
index f7c4578865c5..30bdb38f0727 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-a1.dts
@@ -58,6 +58,24 @@
 		gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
 		linux,rc-map-name = "rc-beelink-gs1";
 	};
+
+	spdif_dit: spdif-dit {
+		compatible = "linux,spdif-dit";
+		#sound-dai-cells = <0>;
+	};
+
+	spdif_sound: spdif-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "SPDIF";
+
+		simple-audio-card,cpu {
+			sound-dai = <&spdif>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&spdif_dit>;
+		};
+	};
 };
 
 &analog_sound {
@@ -325,6 +343,11 @@
 	status = "okay";
 };
 
+&spdif {
+	pinctrl-0 = <&spdifm0_tx>;
+	status = "okay";
+};
+
 &tsadc {
 	rockchip,hw-tshut-mode = <0>;
 	rockchip,hw-tshut-polarity = <0>;
@@ -358,6 +381,11 @@
 	status = "okay";
 };
 
+&usbdrd3 {
+	dr_mode = "host";
+	status = "okay";
+};
+
 &vop {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3328-roc-pc.dts
index 329d03172433..c0b7b98ff788 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-roc-pc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-roc-pc.dts
@@ -44,10 +44,6 @@
 	mute-gpios = <&grf_gpio 0 GPIO_ACTIVE_LOW>;
 };
 
-&gpu {
-	mali-supply = <&vdd_logic>;
-};
-
 &pinctrl {
 	ir {
 		ir_int: ir-int {
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-roc.dtsi b/arch/arm64/boot/dts/rockchip/rk3328-roc.dtsi
index b5bd5e7d5748..7d62a3e96b19 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-roc.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328-roc.dtsi
@@ -84,6 +84,13 @@
 		regulator-boot-on;
 	};
 
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&ir_int>;
+		pinctrl-names = "default";
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -160,6 +167,10 @@
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&vdd_logic>;
+};
+
 &hdmi {
 	status = "okay";
 };
@@ -300,6 +311,12 @@
 };
 
 &pinctrl {
+	ir {
+		ir_int: ir-int {
+			rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	pmic {
 		pmic_int_l: pmic-int-l {
 			rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_up>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
index 5367e5fa9232..592fd8ca21df 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3328-rock64.dts
@@ -152,6 +152,10 @@
 	status = "okay";
 };
 
+&gpu {
+	mali-supply = <&vdd_logic>;
+};
+
 &hdmi {
 	avdd-0v9-supply = <&vdd_10>;
 	avdd-1v8-supply = <&vcc_18>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3328.dtsi b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
index 6438c969f9d7..283d9cbc4368 100644
--- a/arch/arm64/boot/dts/rockchip/rk3328.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3328.dtsi
@@ -331,6 +331,11 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 
+			power-domain@RK3328_PD_GPU {
+				reg = <RK3328_PD_GPU>;
+				clocks = <&cru ACLK_GPU>;
+				#power-domain-cells = <0>;
+			};
 			power-domain@RK3328_PD_HEVC {
 				reg = <RK3328_PD_HEVC>;
 				clocks = <&cru SCLK_VENC_CORE>;
@@ -570,9 +575,13 @@
 							 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
 					contribution = <4096>;
 				};
+				map1 {
+					trip = <&target>;
+					cooling-device = <&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+					contribution = <4096>;
+				};
 			};
 		};
-
 	};
 
 	tsadc: tsadc@ff250000 {
@@ -651,7 +660,36 @@
 				  "ppmmu1";
 		clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
 		clock-names = "bus", "core";
+		operating-points-v2 = <&gpu_opp_table>;
+		power-domains = <&power RK3328_PD_GPU>;
 		resets = <&cru SRST_GPU_A>;
+		#cooling-cells = <2>;
+	};
+
+	gpu_opp_table: opp-table-gpu {
+		compatible = "operating-points-v2";
+
+		opp-200000000 {
+			opp-hz = /bits/ 64 <200000000>;
+			opp-microvolt = <1075000>;
+		};
+
+		opp-300000000 {
+			opp-hz = /bits/ 64 <300000000>;
+			opp-microvolt = <1075000>;
+		};
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+			opp-microvolt = <1075000>;
+		};
+
+		opp-500000000 {
+			/* causes stability issues */
+			opp-hz = /bits/ 64 <500000000>;
+			opp-microvolt = <1150000>;
+			status = "disabled";
+		};
 	};
 
 	h265e_mmu: iommu@ff330200 {
diff --git a/arch/arm64/boot/dts/rockchip/rk3368-lba3368.dts b/arch/arm64/boot/dts/rockchip/rk3368-lba3368.dts
index b99bb0a5f900..b9801a691b48 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368-lba3368.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3368-lba3368.dts
@@ -609,7 +609,7 @@
 
 	bluetooth {
 		compatible = "brcm,bcm4345c5";
-		interrupts-extended = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
+		interrupts-extended = <&gpio3 RK_PA7 IRQ_TYPE_LEVEL_HIGH>;
 		interrupt-names = "host-wakeup";
 		clocks = <&rk808 RK808_CLKOUT1>;
 		clock-names = "lpo";
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
index 5a8551d9ffe4..eaaca08a7601 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-pinebook-pro.dts
@@ -883,6 +883,12 @@
 		};
 	};
 
+	wifi {
+		wifi_host_wake_l: wifi-host-wake-l {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	wireless-bluetooth {
 		bt_wake_pin: bt-wake-pin {
 			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -940,7 +946,19 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
 	sd-uhs-sdr104;
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
 };
 
 &sdhci {
@@ -959,6 +977,7 @@
 		reg = <0>;
 		m25p,fast-read;
 		spi-max-frequency = <10000000>;
+		vcc-supply = <&vcc_3v0>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
index 585ef0fd88ef..2dca1dca20b8 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-pinephone-pro.dts
@@ -689,6 +689,12 @@
 		};
 	};
 
+	wifi {
+		wifi_host_wake_l: wifi-host-wake-l {
+			rockchip,pins = <4 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	wireless-bluetooth {
 		bt_wake_pin: bt-wake-pin {
 			rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -715,7 +721,19 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;
 	sd-uhs-sdr104;
+	#address-cells = <1>;
+	#size-cells = <0>;
 	status = "okay";
+
+	brcmf: wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <RK_PD0 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_host_wake_l>;
+	};
 };
 
 &pwm0 {
@@ -754,6 +772,7 @@
 		compatible = "jedec,spi-nor";
 		reg = <0>;
 		spi-max-frequency = <10000000>;
+		vcc-supply = <&vcc_1v8>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou-video-demo.dtso b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou-video-demo.dtso
index d28880b8dd44..5e8f729c2cf2 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou-video-demo.dtso
+++ b/arch/arm64/boot/dts/rockchip/rk3399-puma-haikou-video-demo.dtso
@@ -26,7 +26,7 @@
 	};
 
 	cam_afvdd_2v8: regulator-cam-afvdd-2v8 {
-		compatible  = "regulator-fixed";
+		compatible = "regulator-fixed";
 		gpio = <&pca9670 2 GPIO_ACTIVE_LOW>;
 		regulator-max-microvolt = <2800000>;
 		regulator-min-microvolt = <2800000>;
@@ -35,7 +35,7 @@
 	};
 
 	cam_avdd_2v8: regulator-cam-avdd-2v8 {
-		compatible  = "regulator-fixed";
+		compatible = "regulator-fixed";
 		gpio = <&pca9670 4 GPIO_ACTIVE_LOW>;
 		regulator-max-microvolt = <2800000>;
 		regulator-min-microvolt = <2800000>;
@@ -44,7 +44,7 @@
 	};
 
 	cam_dovdd_1v8: regulator-cam-dovdd-1v8 {
-		compatible  = "regulator-fixed";
+		compatible = "regulator-fixed";
 	        gpio = <&pca9670 3 GPIO_ACTIVE_LOW>;
 	        regulator-max-microvolt = <1800000>;
 	        regulator-min-microvolt = <1800000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3528-armsom-sige1.dts b/arch/arm64/boot/dts/rockchip/rk3528-armsom-sige1.dts
new file mode 100644
index 000000000000..6e21579365a5
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3528-armsom-sige1.dts
@@ -0,0 +1,464 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3528.dtsi"
+
+/ {
+	model = "ArmSoM Sige1";
+	compatible = "armsom,sige1", "rockchip,rk3528";
+
+	aliases {
+		ethernet0 = &gmac1;
+		i2c0 = &i2c0;
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+		mmc2 = &sdio0;
+		serial0 = &uart0;
+		serial2 = &uart2;
+	};
+
+	chosen {
+		stdout-path = "serial0:1500000n8";
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-maskrom {
+			label = "MASKROM";
+			linux,code = <KEY_SETUP>;
+			press-threshold-microvolt = <0>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&g_led>, <&r_led>;
+
+		led-0 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "on";
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "on";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	vcc0v6_ddr: regulator-0v6-vcc-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc0v6_ddr";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <600000>;
+		regulator-max-microvolt = <600000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vdd_0v9: regulator-0v9-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_ddr: regulator-1v1-vcc-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_ddr";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_1v8: regulator-1v8-vcc {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+	};
+
+	vcc1v8_ddr: regulator-1v8-vcc-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc1v8_ddr";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_3v3: regulator-3v3-vcc {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_dcin>;
+	};
+
+	vcc3v3_sd: regulator-3v3-vcc-sd {
+		compatible = "regulator-fixed";
+		gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwren_l>;
+		regulator-name = "vcc3v3_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3>;
+	};
+
+	vcc5v0_sys: regulator-5v0-vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc_dcin>;
+	};
+
+	vcc5v0_usb1_host: regulator-5v0-vcc-usb1-host {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb20_host1_drv_h>;
+		regulator-name = "vcc5v0_usb1_host";
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_usb2_host: regulator-5v0-vcc-usb2-host {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb20_host2_drv_h>;
+		regulator-name = "vcc5v0_usb2_host";
+		regulator-always-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_usb_otg: regulator-5v0-vcc-usb-otg {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb20_otg0_drv_h>;
+		regulator-name = "vcc5v0_usb_otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_dcin: regulator-vcc-dcin {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_dcin";
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vccio_sd: regulator-vccio-sd {
+		compatible = "regulator-gpio";
+		gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_vol_ctrl_h>;
+		regulator-name = "vccio_sd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		states = <1800000 0x0>, <3300000 0x1>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vdd_arm: regulator-vdd-arm {
+		compatible = "pwm-regulator";
+		pwms = <&pwm3 0 5000 PWM_POLARITY_INVERTED>;
+		pwm-supply = <&vcc5v0_sys>;
+		regulator-name = "vdd_arm";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <746000>;
+		regulator-max-microvolt = <1201000>;
+		regulator-settling-time-up-us = <250>;
+	};
+
+	vdd_logic: regulator-vdd-logic {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 5000 PWM_POLARITY_INVERTED>;
+		pwm-supply = <&vcc5v0_sys>;
+		regulator-name = "vdd_logic";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <705000>;
+		regulator-max-microvolt = <1006000>;
+		regulator-settling-time-up-us = <250>;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_reg_on_h>, <&clkm1_32k_out>;
+		post-power-on-delay-ms = <200>;
+		reset-gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&gmac1 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&vcc_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_miim>, <&rgmii_tx_bus2>, <&rgmii_rx_bus2>,
+		    <&rgmii_rgmii_clk>, <&rgmii_rgmii_bus>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_logic>;
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0m0_xfer>;
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <RK_PA0 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_int_l>;
+		wakeup-source;
+	};
+};
+
+&mdio1 {
+	rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gmac1_rstn_l>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	bluetooth {
+		bt_reg_on_h: bt-reg-on-h {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		bt_wake_host_h: bt-wake-host-h {
+			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		host_wake_bt_h: host-wake-bt-h {
+			rockchip,pins = <3 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	ethernet {
+		gmac1_rstn_l: gmac1-rstn-l {
+			rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		g_led: g-led {
+			rockchip,pins = <3 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		r_led: r-led {
+			rockchip,pins = <3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	rtc {
+		rtc_int_l: rtc-int-l {
+			rockchip,pins = <4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_vol_ctrl_h: sdmmc-vol-ctrl-h {
+			rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		sdmmc_pwren_l: sdmmc-pwren-l {
+			rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		usb20_host1_drv_h: usb20-host1-drv-h {
+			rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usb20_host2_drv_h: usb20-host2-drv-h {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usb20_otg0_drv_h: usb20-otg0-drv-h {
+			rockchip,pins = <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		wifi_reg_on_h: wifi-reg-on-h {
+			rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_wake_host_h: wifi-wake-host-h {
+			rockchip,pins = <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm2m0_pins>;
+	status = "okay";
+};
+
+&pwm3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm3m0_pins>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdio0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cap-sdio-irq;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&sdio_pwrseq>;
+	no-mmc;
+	no-sd;
+	non-removable;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+		clocks = <&cru CLK_DEEPSLOW>;
+		clock-names = "lpo";
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PA7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_wake_host_h>;
+	};
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0m0_xfer>;
+	status = "okay";
+};
+
+&uart2 {
+	dma-names = "tx", "rx";
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2m1_xfer>, <&uart2m1_ctsn>, <&uart2m1_rtsn>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&cru CLK_DEEPSLOW>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio3 RK_PC3 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <RK_PC2 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wakeup";
+		pinctrl-names = "default";
+		pinctrl-0 = <&bt_reg_on_h>, <&bt_wake_host_h>, <&host_wake_bt_h>;
+		shutdown-gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+		vbat-supply = <&vcc_3v3>;
+		vddio-supply = <&vcc_1v8>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3528-nanopi-zero2.dts b/arch/arm64/boot/dts/rockchip/rk3528-nanopi-zero2.dts
new file mode 100644
index 000000000000..9f683033c5f3
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3528-nanopi-zero2.dts
@@ -0,0 +1,340 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3528.dtsi"
+
+/ {
+	model = "FriendlyElec NanoPi Zero2";
+	compatible = "friendlyarm,nanopi-zero2", "rockchip,rk3528";
+
+	aliases {
+		ethernet0 = &gmac1;
+		i2c1 = &i2c1;
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:1500000n8";
+	};
+
+	adc-keys-0 {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-maskrom {
+			label = "MASK";
+			linux,code = <KEY_SETUP>;
+			press-threshold-microvolt = <0>;
+		};
+	};
+
+	adc-keys-1 {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-recovery {
+			label = "RECOVERY";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <0>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led1>, <&led_sys>;
+
+		led-0 {
+			color = <LED_COLOR_ID_RED>;
+			default-state = "on";
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_GREEN>;
+			default-state = "on";
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio4 RK_PB1 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	vcc0v6_ddr: regulator-0v6-vcc-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc0v6_ddr";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <600000>;
+		regulator-max-microvolt = <600000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vdd_0v9: regulator-0v9-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_ddr: regulator-1v1-vcc-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_ddr";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_1v8: regulator-1v8-vcc {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+	};
+
+	vcc_3v3: regulator-3v3-vcc {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_sd: regulator-3v3-vcc-sd {
+		compatible = "regulator-fixed";
+		gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_pwren_l>;
+		regulator-name = "vcc3v3_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3>;
+	};
+
+	vcc5v0_sys: regulator-5v0-vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	usb2_host_5v: regulator-5v0-usb2-host {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio4 RK_PB5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb20_host1_pwren>;
+		regulator-name = "usb2_host_5v";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vccio_sd: regulator-vccio-sd {
+		compatible = "regulator-gpio";
+		gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_vol_ctrl_h>;
+		regulator-name = "vccio_sd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		states = <1800000 0x0>, <3300000 0x1>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vdd_arm: regulator-vdd-arm {
+		compatible = "pwm-regulator";
+		pwms = <&pwm1 0 5000 PWM_POLARITY_INVERTED>;
+		pwm-supply = <&vcc5v0_sys>;
+		regulator-name = "vdd_arm";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <746000>;
+		regulator-max-microvolt = <1201000>;
+		regulator-settling-time-up-us = <250>;
+	};
+
+	vdd_logic: regulator-vdd-logic {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 5000 PWM_POLARITY_INVERTED>;
+		pwm-supply = <&vcc5v0_sys>;
+		regulator-name = "vdd_logic";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <705000>;
+		regulator-max-microvolt = <1006000>;
+		regulator-settling-time-up-us = <250>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&gmac1 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&vcc_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_miim>, <&rgmii_tx_bus2>, <&rgmii_rx_bus2>,
+		    <&rgmii_rgmii_clk>, <&rgmii_rgmii_bus>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_logic>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1m0_xfer>;
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <RK_PC1 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_int_l>;
+		wakeup-source;
+	};
+};
+
+&mdio1 {
+	rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gmac1_rstn_l>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	ethernet {
+		gmac1_rstn_l: gmac1-rstn-l {
+			rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		led1: led1 {
+			rockchip,pins = <4 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		led_sys: led-sys {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	rtc {
+		rtc_int_l: rtc-int-l {
+			rockchip,pins = <4 RK_PC1 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_vol_ctrl_h: sdmmc-vol-ctrl-h {
+			rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		sdmmc_pwren_l: sdmmc-pwren-l {
+			rockchip,pins = <4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		usb20_host1_pwren: usb20-host1-pwren {
+			rockchip,pins = <4 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm1m0_pins>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm2m0_pins>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0m0_xfer>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3528-rock-2.dtsi b/arch/arm64/boot/dts/rockchip/rk3528-rock-2.dtsi
new file mode 100644
index 000000000000..aedc7ee9ee46
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3528-rock-2.dtsi
@@ -0,0 +1,293 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3528.dtsi"
+
+/ {
+	aliases {
+		i2c1 = &i2c1;
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:1500000n8";
+	};
+
+	adc-keys {
+		compatible = "adc-keys";
+		io-channels = <&saradc 0>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-maskrom {
+			label = "MASKROM";
+			linux,code = <KEY_SETUP>;
+			press-threshold-microvolt = <0>;
+		};
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&state_led_b>;
+
+		led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			default-state = "on";
+			function = LED_FUNCTION_HEARTBEAT;
+			gpios = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	vdd_0v9: regulator-0v9-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_0v9";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_ddr: regulator-1v1-vcc-ddr {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_ddr";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_1v8: regulator-1v8-vcc {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3>;
+	};
+
+	vcc_3v3: regulator-3v3-vcc {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_wifi: regulator-3v3-vcc-wifi {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio4 RK_PA4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_wifi_pwr>;
+		regulator-name = "vcc_wifi";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3>;
+	};
+
+	vcc5v0_sys: regulator-5v0-vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+	};
+
+	vcc5v0_usb20: regulator-5v0-vcc-usb20 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PA1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_host_en>;
+		regulator-name = "vcc5v0_usb20";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vccio_sd: regulator-vccio-sd {
+		compatible = "regulator-gpio";
+		gpios = <&gpio1 RK_PC1 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sdmmc_vol_ctrl_h>;
+		regulator-name = "vccio_sd";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		states = <1800000 0x0>, <3300000 0x1>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vdd_arm: regulator-vdd-arm {
+		compatible = "pwm-regulator";
+		pwms = <&pwm1 0 5000 PWM_POLARITY_INVERTED>;
+		pwm-supply = <&vcc5v0_sys>;
+		regulator-name = "vdd_arm";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <746000>;
+		regulator-max-microvolt = <1201000>;
+		regulator-settling-time-up-us = <250>;
+	};
+
+	vdd_logic: regulator-vdd-logic {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 5000 PWM_POLARITY_INVERTED>;
+		pwm-supply = <&vcc5v0_sys>;
+		regulator-name = "vdd_logic";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <705000>;
+		regulator-max-microvolt = <1006000>;
+		regulator-settling-time-up-us = <250>;
+	};
+
+	rfkill {
+		compatible = "rfkill-gpio";
+		label = "rfkill-wlan";
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_reg_on_h>;
+		radio-type = "wlan";
+		shutdown-gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_arm>;
+};
+
+&gpu {
+	mali-supply = <&vdd_logic>;
+	status = "okay";
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1m0_xfer>;
+	status = "okay";
+
+	eeprom@50 {
+		compatible = "belling,bl24c16a", "atmel,24c16";
+		reg = <0x50>;
+		pagesize = <16>;
+		read-only;
+		vcc-supply = <&vcc_3v3>;
+	};
+};
+
+&pinctrl {
+	bluetooth {
+		bt_wake_host_h: bt-wake-host-h {
+			rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		host_wake_bt_h: host-wake-bt-h {
+			rockchip,pins = <1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		state_led_b: state-led-b {
+			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	sdmmc {
+		sdmmc_vol_ctrl_h: sdmmc-vol-ctrl-h {
+			rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		usb_host_en: usb-host-en {
+			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	wifi {
+		usb_wifi_pwr: usb-wifi-pwr {
+			rockchip,pins = <4 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_reg_on_h: wifi-reg-on-h {
+			rockchip,pins = <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_wake_host_h: wifi-wake-host-h {
+			rockchip,pins = <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm1m0_pins>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm2m0_pins>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	mmc-hs200-1_8v;
+	no-sd;
+	no-sdio;
+	non-removable;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-mmc-highspeed;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <100000000>;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0m0_xfer>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3528-rock-2a.dts b/arch/arm64/boot/dts/rockchip/rk3528-rock-2a.dts
new file mode 100644
index 000000000000..c03ae1dd3456
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3528-rock-2a.dts
@@ -0,0 +1,82 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3528-rock-2.dtsi"
+
+/ {
+	model = "Radxa ROCK 2A";
+	compatible = "radxa,rock-2a", "rockchip,rk3528";
+
+	aliases {
+		ethernet0 = &gmac1;
+	};
+
+	vcc5v0_usb30_otg: regulator-5v0-vcc-usb30-otg {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_otg_en>;
+		regulator-name = "vcc5v0_usb30_otg";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&gmac1 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&vcc_3v3>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&rgmii_miim>, <&rgmii_tx_bus2>, <&rgmii_rx_bus2>,
+		    <&rgmii_rgmii_clk>, <&rgmii_rgmii_bus>;
+	status = "okay";
+};
+
+&leds {
+	pinctrl-names = "default";
+	pinctrl-0 = <&state_led_b>, <&sys_led_g>;
+
+	led-1 {
+		color = <LED_COLOR_ID_GREEN>;
+		default-state = "on";
+		function = LED_FUNCTION_STATUS;
+		gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
+		linux,default-trigger = "default-on";
+	};
+};
+
+&mdio1 {
+	rgmii_phy: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&gmac1_rstn_l>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio4 RK_PC2 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	ethernet {
+		gmac1_rstn_l: gmac1-rstn-l {
+			rockchip,pins = <4 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	leds {
+		sys_led_g: sys-led-g {
+			rockchip,pins = <3 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		usb_otg_en: usb-otg-en {
+			rockchip,pins = <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3528-rock-2f.dts b/arch/arm64/boot/dts/rockchip/rk3528-rock-2f.dts
new file mode 100644
index 000000000000..3e2b9b685cb2
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3528-rock-2f.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3528-rock-2.dtsi"
+
+/ {
+	model = "Radxa ROCK 2F";
+	compatible = "radxa,rock-2f", "rockchip,rk3528";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3528.dtsi b/arch/arm64/boot/dts/rockchip/rk3528.dtsi
index 001a555c83b7..d5f8f7b9bf01 100644
--- a/arch/arm64/boot/dts/rockchip/rk3528.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3528.dtsi
@@ -9,6 +9,7 @@
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/pinctrl/rockchip.h>
 #include <dt-bindings/clock/rockchip,rk3528-cru.h>
+#include <dt-bindings/power/rockchip,rk3528-power.h>
 #include <dt-bindings/reset/rockchip,rk3528-cru.h>
 
 / {
@@ -53,6 +54,7 @@
 			device_type = "cpu";
 			enable-method = "psci";
 			clocks = <&scmi_clk SCMI_CLK_CPU>;
+			operating-points-v2 = <&cpu_opp_table>;
 		};
 
 		cpu1: cpu@1 {
@@ -61,6 +63,7 @@
 			device_type = "cpu";
 			enable-method = "psci";
 			clocks = <&scmi_clk SCMI_CLK_CPU>;
+			operating-points-v2 = <&cpu_opp_table>;
 		};
 
 		cpu2: cpu@2 {
@@ -69,6 +72,7 @@
 			device_type = "cpu";
 			enable-method = "psci";
 			clocks = <&scmi_clk SCMI_CLK_CPU>;
+			operating-points-v2 = <&cpu_opp_table>;
 		};
 
 		cpu3: cpu@3 {
@@ -77,6 +81,7 @@
 			device_type = "cpu";
 			enable-method = "psci";
 			clocks = <&scmi_clk SCMI_CLK_CPU>;
+			operating-points-v2 = <&cpu_opp_table>;
 		};
 	};
 
@@ -95,6 +100,41 @@
 		};
 	};
 
+	cpu_opp_table: opp-table-cpu {
+		compatible = "operating-points-v2";
+		opp-shared;
+
+		opp-1200000000 {
+			opp-hz = /bits/ 64 <1200000000>;
+			opp-microvolt = <875000 875000 1100000>;
+			clock-latency-ns = <40000>;
+		};
+
+		opp-1416000000 {
+			opp-hz = /bits/ 64 <1416000000>;
+			opp-microvolt = <925000 925000 1100000>;
+			clock-latency-ns = <40000>;
+		};
+
+		opp-1608000000 {
+			opp-hz = /bits/ 64 <1608000000>;
+			opp-microvolt = <975000 975000 1100000>;
+			clock-latency-ns = <40000>;
+		};
+
+		opp-1800000000 {
+			opp-hz = /bits/ 64 <1800000000>;
+			opp-microvolt = <1037500 1037500 1100000>;
+			clock-latency-ns = <40000>;
+		};
+
+		opp-2016000000 {
+			opp-hz = /bits/ 64 <2016000000>;
+			opp-microvolt = <1100000 1100000 1100000>;
+			clock-latency-ns = <40000>;
+		};
+	};
+
 	gpu_opp_table: opp-table-gpu {
 		compatible = "operating-points-v2";
 
@@ -154,6 +194,7 @@
 			gpio-ranges = <&pinctrl 0 32 32>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			power-domains = <&power RK3528_PD_VPU>;
 		};
 
 		gpio2: gpio@ffb00000 {
@@ -166,6 +207,7 @@
 			gpio-ranges = <&pinctrl 0 64 32>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			power-domains = <&power RK3528_PD_VO>;
 		};
 
 		gpio3: gpio@ffb10000 {
@@ -178,6 +220,7 @@
 			gpio-ranges = <&pinctrl 0 96 32>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			power-domains = <&power RK3528_PD_VPU>;
 		};
 
 		gpio4: gpio@ffb20000 {
@@ -190,6 +233,7 @@
 			gpio-ranges = <&pinctrl 0 128 32>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+			power-domains = <&power RK3528_PD_RKVENC>;
 		};
 	};
 
@@ -416,6 +460,11 @@
 			reg = <0x0 0xff340000 0x0 0x8000>;
 		};
 
+		pipe_phy_grf: syscon@ff348000 {
+			compatible = "rockchip,rk3528-pipe-phy-grf", "syscon";
+			reg = <0x0 0xff348000 0x0 0x8000>;
+		};
+
 		vo_grf: syscon@ff360000 {
 			compatible = "rockchip,rk3528-vo-grf", "syscon";
 			reg = <0x0 0xff360000 0x0 0x10000>;
@@ -480,8 +529,8 @@
 				#size-cells = <0>;
 
 				/* These power domains are grouped by VD_GPU */
-				power-domain@4 {
-					reg = <4>;
+				power-domain@RK3528_PD_GPU {
+					reg = <RK3528_PD_GPU>;
 					clocks = <&cru ACLK_GPU_MALI>,
 						 <&cru PCLK_GPU_ROOT>;
 					pm_qos = <&qos_gpu_m0>,
@@ -490,20 +539,19 @@
 				};
 
 				/* These power domains are grouped by VD_LOGIC */
-				power-domain@5 {
-					reg = <5>;
+				power-domain@RK3528_PD_RKVDEC {
+					reg = <RK3528_PD_RKVDEC>;
 					pm_qos = <&qos_rkvdec>;
 					#power-domain-cells = <0>;
 					status = "disabled";
 				};
-				power-domain@6 {
-					reg = <6>;
+				power-domain@RK3528_PD_RKVENC {
+					reg = <RK3528_PD_RKVENC>;
 					pm_qos = <&qos_rkvenc>;
 					#power-domain-cells = <0>;
-					status = "disabled";
 				};
-				power-domain@7 {
-					reg = <7>;
+				power-domain@RK3528_PD_VO {
+					reg = <RK3528_PD_VO>;
 					pm_qos = <&qos_gmac0>,
 						 <&qos_hdcp>,
 						 <&qos_jpegdec>,
@@ -514,10 +562,9 @@
 						 <&qos_vdpp>,
 						 <&qos_vop>;
 					#power-domain-cells = <0>;
-					status = "disabled";
 				};
-				power-domain@8 {
-					reg = <8>;
+				power-domain@RK3528_PD_VPU {
+					reg = <RK3528_PD_VPU>;
 					pm_qos = <&qos_emmc>,
 						 <&qos_fspi>,
 						 <&qos_gmac1>,
@@ -528,7 +575,6 @@
 						 <&qos_usb3otg>,
 						 <&qos_vpu>;
 					#power-domain-cells = <0>;
-					status = "disabled";
 				};
 			};
 		};
@@ -556,7 +602,7 @@
 					  "pp1",
 					  "ppmmu1";
 			operating-points-v2 = <&gpu_opp_table>;
-			power-domains = <&power 4>;
+			power-domains = <&power RK3528_PD_GPU>;
 			resets = <&cru SRST_A_GPU>;
 			status = "disabled";
 		};
@@ -570,6 +616,7 @@
 			interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
 			dmas = <&dmac 25>, <&dmac 24>;
 			dma-names = "tx", "rx";
+			power-domains = <&power RK3528_PD_RKVENC>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -584,6 +631,7 @@
 			interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>;
 			dmas = <&dmac 31>, <&dmac 30>;
 			dma-names = "tx", "rx";
+			power-domains = <&power RK3528_PD_VPU>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -608,6 +656,7 @@
 			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
 			dmas = <&dmac 11>, <&dmac 10>;
+			power-domains = <&power RK3528_PD_RKVENC>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
 			status = "disabled";
@@ -620,6 +669,7 @@
 			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 			dmas = <&dmac 13>, <&dmac 12>;
+			power-domains = <&power RK3528_PD_VPU>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
 			status = "disabled";
@@ -632,6 +682,7 @@
 			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
 			dmas = <&dmac 15>, <&dmac 14>;
+			power-domains = <&power RK3528_PD_RKVENC>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
 			status = "disabled";
@@ -644,6 +695,7 @@
 			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
 			dmas = <&dmac 17>, <&dmac 16>;
+			power-domains = <&power RK3528_PD_VO>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
 			status = "disabled";
@@ -656,6 +708,7 @@
 			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 			dmas = <&dmac 19>, <&dmac 18>;
+			power-domains = <&power RK3528_PD_VPU>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
 			status = "disabled";
@@ -668,6 +721,7 @@
 			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
 			dmas = <&dmac 21>, <&dmac 20>;
+			power-domains = <&power RK3528_PD_VPU>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
 			status = "disabled";
@@ -680,6 +734,7 @@
 			clock-names = "baudclk", "apb_pclk";
 			interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 			dmas = <&dmac 23>, <&dmac 22>;
+			power-domains = <&power RK3528_PD_VPU>;
 			reg-io-width = <4>;
 			reg-shift = <2>;
 			status = "disabled";
@@ -692,6 +747,7 @@
 			clocks = <&cru CLK_I2C0>, <&cru PCLK_I2C0>;
 			clock-names = "i2c", "pclk";
 			interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&power RK3528_PD_RKVENC>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -704,6 +760,7 @@
 			clocks = <&cru CLK_I2C1>, <&cru PCLK_I2C1>;
 			clock-names = "i2c", "pclk";
 			interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&power RK3528_PD_RKVENC>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -730,6 +787,7 @@
 			clocks = <&cru CLK_I2C3>, <&cru PCLK_I2C3>;
 			clock-names = "i2c", "pclk";
 			interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&power RK3528_PD_VPU>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -744,6 +802,7 @@
 			interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&i2c4_xfer>;
+			power-domains = <&power RK3528_PD_VO>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -756,6 +815,7 @@
 			clocks = <&cru CLK_I2C5>, <&cru PCLK_I2C5>;
 			clock-names = "i2c", "pclk";
 			interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&power RK3528_PD_VPU>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -768,6 +828,7 @@
 			clocks = <&cru CLK_I2C6>, <&cru PCLK_I2C6>;
 			clock-names = "i2c", "pclk";
 			interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&power RK3528_PD_VPU>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -782,6 +843,7 @@
 			interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&i2c7_xfer>;
+			power-domains = <&power RK3528_PD_VO>;
 			#address-cells = <1>;
 			#size-cells = <0>;
 			status = "disabled";
@@ -873,6 +935,7 @@
 			clocks = <&cru CLK_SARADC>, <&cru PCLK_SARADC>;
 			clock-names = "saradc", "apb_pclk";
 			interrupts = <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&power RK3528_PD_VPU>;
 			resets = <&cru SRST_P_SARADC>;
 			reset-names = "saradc-apb";
 			#io-channel-cells = <1>;
@@ -893,6 +956,7 @@
 			interrupt-names = "macirq", "eth_wake_irq";
 			phy-handle = <&rmii0_phy>;
 			phy-mode = "rmii";
+			power-domains = <&power RK3528_PD_VO>;
 			resets = <&cru SRST_A_MAC_VO>;
 			reset-names = "stmmaceth";
 			rockchip,grf = <&vo_grf>;
@@ -951,6 +1015,7 @@
 			interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 124 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq", "eth_wake_irq";
+			power-domains = <&power RK3528_PD_VPU>;
 			resets = <&cru SRST_A_MAC>;
 			reset-names = "stmmaceth";
 			rockchip,grf = <&vpu_grf>;
@@ -1001,6 +1066,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&emmc_bus8>, <&emmc_clk>, <&emmc_cmd>,
 				    <&emmc_strb>;
+			power-domains = <&power RK3528_PD_VPU>;
 			resets = <&cru SRST_C_EMMC>, <&cru SRST_H_EMMC>,
 				 <&cru SRST_A_EMMC>, <&cru SRST_B_EMMC>,
 				 <&cru SRST_T_EMMC>;
@@ -1022,6 +1088,7 @@
 			max-frequency = <200000000>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&sdio0_bus4>, <&sdio0_clk>, <&sdio0_cmd>;
+			power-domains = <&power RK3528_PD_VPU>;
 			resets = <&cru SRST_H_SDIO0>;
 			reset-names = "reset";
 			status = "disabled";
@@ -1041,6 +1108,7 @@
 			max-frequency = <200000000>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&sdio1_bus4>, <&sdio1_clk>, <&sdio1_cmd>;
+			power-domains = <&power RK3528_PD_VPU>;
 			resets = <&cru SRST_H_SDIO1>;
 			reset-names = "reset";
 			status = "disabled";
@@ -1061,6 +1129,7 @@
 			pinctrl-names = "default";
 			pinctrl-0 = <&sdmmc_bus4>, <&sdmmc_clk>, <&sdmmc_cmd>,
 				    <&sdmmc_det>;
+			power-domains = <&power RK3528_PD_VO>;
 			resets = <&cru SRST_H_SDMMC0>;
 			reset-names = "reset";
 			rockchip,default-sample-phase = <90>;
@@ -1084,6 +1153,25 @@
 			#dma-cells = <1>;
 			arm,pl330-periph-burst;
 		};
+
+		combphy: phy@ffdc0000 {
+			compatible = "rockchip,rk3528-naneng-combphy";
+			reg = <0x0 0xffdc0000 0x0 0x10000>;
+			assigned-clocks = <&cru CLK_REF_PCIE_INNER_PHY>;
+			assigned-clock-rates = <100000000>;
+			clocks = <&cru CLK_REF_PCIE_INNER_PHY>,
+				 <&cru PCLK_PCIE_PHY>,
+				 <&cru PCLK_PIPE_GRF>;
+			clock-names = "ref", "apb", "pipe";
+			power-domains = <&power RK3528_PD_VPU>;
+			resets = <&cru SRST_PCIE_PIPE_PHY>,
+				 <&cru SRST_P_PCIE_PHY>;
+			reset-names = "phy", "apb";
+			#phy-cells = <1>;
+			rockchip,pipe-grf = <&vpu_grf>;
+			rockchip,pipe-phy-grf = <&pipe_phy_grf>;
+			status = "disabled";
+		};
 	};
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-cb2.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-cb2.dtsi
index e7ba477e75f9..7f578c50b4ad 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-cb2.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566-bigtreetech-cb2.dtsi
@@ -53,7 +53,7 @@
 			gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 			pinctrl-names = "default";
-			pinctrl-0 =<&blue_led>;
+			pinctrl-0 = <&blue_led>;
 		};
 
 		led-1 {
@@ -62,7 +62,7 @@
 			gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "heartbeat";
 			pinctrl-names = "default";
-			pinctrl-0 =<&heartbeat_led>;
+			pinctrl-0 = <&heartbeat_led>;
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-hinlink-h66k.dts b/arch/arm64/boot/dts/rockchip/rk3568-hinlink-h66k.dts
new file mode 100644
index 000000000000..bc51123d53f5
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-hinlink-h66k.dts
@@ -0,0 +1,10 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3568-hinlink-opc.dtsi"
+
+/ {
+	model = "HINLINK H66K";
+	compatible = "hinlink,h66k", "rockchip,rk3568";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-hinlink-h68k.dts b/arch/arm64/boot/dts/rockchip/rk3568-hinlink-h68k.dts
new file mode 100644
index 000000000000..793ee651b868
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-hinlink-h68k.dts
@@ -0,0 +1,83 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include "rk3568-hinlink-opc.dtsi"
+
+/ {
+	model = "HINLINK H68K";
+	compatible = "hinlink,h68k", "rockchip,rk3568";
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+	};
+};
+
+&gmac0 {
+	assigned-clocks = <&cru SCLK_GMAC0_RX_TX>, <&cru SCLK_GMAC0>;
+	assigned-clock-parents = <&cru SCLK_GMAC0_RGMII_SPEED>;
+	assigned-clock-rates = <0>, <125000000>;
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy0>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&vcc3v3_sys>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus
+		     &gmac0_rstn>;
+	status = "okay";
+};
+
+&gmac1 {
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>;
+	assigned-clock-rates = <0>, <125000000>;
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy1>;
+	phy-mode = "rgmii-id";
+	phy-supply = <&vcc3v3_sys>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m1_miim
+		     &gmac1m1_tx_bus2
+		     &gmac1m1_rx_bus2
+		     &gmac1m1_rgmii_clk
+		     &gmac1m1_rgmii_bus
+		     &gmac1_rstn>;
+	status = "okay";
+};
+
+&mdio0 {
+	rgmii_phy0: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x1>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio1 RK_PB0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pinctrl {
+	gmac {
+		gmac0_rstn: gmac0-rstn {
+			rockchip,pins = <2 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		gmac1_rstn: gmac1-rstn {
+			rockchip,pins = <1 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-hinlink-opc.dtsi b/arch/arm64/boot/dts/rockchip/rk3568-hinlink-opc.dtsi
new file mode 100644
index 000000000000..14f3839ca091
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-hinlink-opc.dtsi
@@ -0,0 +1,666 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include "rk3568.dtsi"
+
+/ {
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc0;
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
+	ir-receiver {
+		compatible = "gpio-ir-receiver";
+		gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pwm3_ir_m0>;
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		pinctrl-names = "default";
+		pinctrl-0 = <&factory>;
+
+		button-factory {
+			label = "factory";
+			linux,code = <KEY_RESTART>;
+			gpios = <&gpio0 RK_PA0 GPIO_ACTIVE_LOW>;
+			debounce-interval = <50>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&green_led>, <&red_led>, <&work_led>;
+
+		led-0 {
+			color = <LED_COLOR_ID_BLUE>;
+			function = LED_FUNCTION_WAN;
+			gpios = <&gpio3 RK_PA5 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "netdev";
+		};
+
+		led-1 {
+			color = <LED_COLOR_ID_AMBER>;
+			function = LED_FUNCTION_DISK;
+			gpios = <&gpio3 RK_PA7 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-2 {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio3 RK_PB0 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+	};
+
+	vcc0v9_2g5: regulator-0v9-vcc-2g5 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc0v9_2g5";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <900000>;
+		regulator-max-microvolt = <900000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc12v_dcinp: regulator-12v-vcc-dcinp {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc12v_dcinp";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+	};
+
+	vcc3v3_pi6c_05: regulator-3v3-vcc-pi6c-05 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lan_power_en>;
+		regulator-name = "vcc3v3_pi6c_05";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc3v3_sd: regulator-3v3-vcc-sd {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&sd_pwren>;
+		regulator-name = "vcc3v3_sd";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_sys: regulator-3v3-vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_sys: regulator-5v0-vcc-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcinp>;
+	};
+
+	vcc5v0_usb30_otg0: regulator-5v0-vcc-usb30-otg0 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usb_power_en>;
+		regulator-name = "vcc5v0_usb30_otg0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy0 {
+	status = "okay";
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&combphy2 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
+&hdmi_sound {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@1c {
+		compatible = "tcs,tcs4525";
+		reg = <0x1c>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	rk809: pmic@20 {
+		compatible = "rockchip,rk809";
+		reg = <0x20>;
+		#clock-cells = <1>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_int>;
+		system-power-controller;
+		wakeup-source;
+
+		vcc1-supply = <&vcc3v3_sys>;
+		vcc2-supply = <&vcc3v3_sys>;
+		vcc3-supply = <&vcc3v3_sys>;
+		vcc4-supply = <&vcc3v3_sys>;
+		vcc5-supply = <&vcc3v3_sys>;
+		vcc6-supply = <&vcc3v3_sys>;
+		vcc7-supply = <&vcc3v3_sys>;
+		vcc8-supply = <&vcc3v3_sys>;
+		vcc9-supply = <&vcc3v3_sys>;
+
+		regulators {
+			vdd_logic: DCDC_REG1 {
+				regulator-name = "vdd_logic";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_gpu: DCDC_REG2 {
+				regulator-name = "vdd_gpu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_ddr: DCDC_REG3 {
+				regulator-name = "vcc_ddr";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-initial-mode = <0x2>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vdd_npu: DCDC_REG4 {
+				regulator-name = "vdd_npu";
+				regulator-initial-mode = <0x2>;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1350000>;
+				regulator-ramp-delay = <6001>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8: DCDC_REG5 {
+				regulator-name = "vcc_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_image: LDO_REG1 {
+				regulator-name = "vdda0v9_image";
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda_0v9: LDO_REG2 {
+				regulator-name = "vdda_0v9";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdda0v9_pmu: LDO_REG3 {
+				regulator-name = "vdda0v9_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <900000>;
+				regulator-max-microvolt = <900000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <900000>;
+				};
+			};
+
+			vccio_acodec: LDO_REG4 {
+				regulator-name = "vccio_acodec";
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd: LDO_REG5 {
+				regulator-name = "vccio_sd";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3_pmu: LDO_REG6 {
+				regulator-name = "vcc3v3_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vcca_1v8: LDO_REG7 {
+				regulator-name = "vcca_1v8";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcca1v8_pmu: LDO_REG8 {
+				regulator-name = "vcca1v8_pmu";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vcca1v8_image: LDO_REG9 {
+				regulator-name = "vcca1v8_image";
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3: SWITCH_REG1 {
+				regulator-name = "vcc_3v3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc3v3: SWITCH_REG2 {
+				regulator-name = "vcc3v3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2m1_xfer>;
+	status = "okay";
+};
+
+&i2s0_8ch {
+	status = "okay";
+};
+
+&pcie2x1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&wifi_perstn>;
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pi6c_05>;
+	status = "okay";
+};
+
+&pcie30phy {
+	data-lanes = <1 2>;
+	status = "okay";
+};
+
+&pcie3x1 {
+	num-lanes = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&lan_resetb>;
+	reset-gpios = <&gpio3 RK_PA4 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pi6c_05>;
+	status = "okay";
+};
+
+&pcie3x2 {
+	num-lanes = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&lan_reseta>;
+	reset-gpios = <&gpio2 RK_PD0 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pi6c_05>;
+	status = "okay";
+};
+
+&pinctrl {
+	keys {
+		factory: factory {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	leds {
+		green_led: green-led {
+			rockchip,pins = <3 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		red_led: red-led {
+			rockchip,pins = <3 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		work_led: work-led {
+			rockchip,pins = <3 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	ir {
+		pwm3_ir_m0: pwm3-ir-m0 {
+			rockchip,pins = <0 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	mmc {
+		sd_pwren: sd-pwren {
+			rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie {
+		lan_power_en: lan-power-en {
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		lan_reseta: lan-reseta {
+			rockchip,pins = <2 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		lan_resetb: lan-resetb {
+			rockchip,pins = <3 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		wifi_perstn: wifi-perstn {
+			rockchip,pins = <2 RK_PD6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pmic {
+		pmic_int: pmic-int {
+			rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	usb {
+		usb_power_en: usb-power-en {
+			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&vcc3v3_pmu>;
+	pmuio2-supply = <&vcc3v3_pmu>;
+	vccio1-supply = <&vccio_acodec>;
+	vccio2-supply = <&vcc_1v8>;
+	vccio3-supply = <&vccio_sd>;
+	vccio4-supply = <&vcc_1v8>;
+	vccio5-supply = <&vcc_3v3>;
+	vccio6-supply = <&vcc_1v8>;
+	vccio7-supply = <&vcc_3v3>;
+	status = "okay";
+};
+
+&pwm0 {
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcca_1v8>;
+	status = "okay";
+};
+
+/* Via Type-C adapter */
+&sata0 {
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	cap-mmc-highspeed;
+	max-frequency = <200000000>;
+	mmc-hs200-1_8v;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+	vmmc-supply = <&vcc_3v3>;
+	vqmmc-supply = <&vcc_1v8>;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	sd-uhs-sdr50;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	phy-supply = <&vcc5v0_usb30_otg0>;
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy1_host {
+	phy-supply = <&vcc5v0_usb30_otg0>;
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	phy-supply = <&vcc5v0_usb30_otg0>;
+	status = "okay";
+};
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts b/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts
index 101e2ee9766d..3386084f6318 100644
--- a/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3576-armsom-sige5.dts
@@ -302,8 +302,7 @@
 		     &eth1m0_tx_bus2
 		     &eth1m0_rx_bus2
 		     &eth1m0_rgmii_clk
-		     &eth1m0_rgmii_bus
-		     &ethm0_clk1_25m_out>;
+		     &eth1m0_rgmii_bus>;
 	status = "okay";
 };
 
@@ -784,7 +783,6 @@
 	rgmii_phy0: phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
 		reg = <0x1>;
-		clocks = <&cru REFCLKO25M_GMAC0_OUT>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&gmac0_rst>;
 		reset-assert-us = <20000>;
@@ -797,7 +795,6 @@
 	rgmii_phy1: phy@1 {
 		compatible = "ethernet-phy-ieee802.3-c22";
 		reg = <0x1>;
-		clocks = <&cru REFCLKO25M_GMAC1_OUT>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&gmac1_rst>;
 		reset-assert-us = <20000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts
index 56527c56830e..db8fef7a4f1b 100644
--- a/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3576-evb1-v10.dts
@@ -232,6 +232,20 @@
 		regulator-max-microvolt = <3300000>;
 		vin-supply = <&vcc_sys>;
 	};
+
+	vcc_wifi_reg_on: regulator-wifi-reg-on {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-0 = <&wifi_reg_on>;
+		pinctrl-names = "default";
+		regulator-name = "wifi_reg_on";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_1v8_s3>;
+	};
 };
 
 &cpu_l0 {
@@ -242,6 +256,10 @@
 	cpu-supply = <&vdd_cpu_big_s0>;
 };
 
+&combphy0_ps {
+	status = "okay";
+};
+
 &combphy1_psu {
 	status = "okay";
 };
@@ -257,9 +275,6 @@
 		     &eth0m0_rgmii_clk
 		     &eth0m0_rgmii_bus
 		     &ethm0_clk0_25m_out>;
-	snps,reset-gpio = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 20000 100000>;
 	tx_delay = <0x21>;
 	status = "okay";
 };
@@ -275,9 +290,6 @@
 		     &eth1m0_rgmii_clk
 		     &eth1m0_rgmii_bus
 		     &ethm0_clk1_25m_out>;
-	snps,reset-gpio = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;
-	snps,reset-active-low;
-	snps,reset-delays-us = <0 20000 100000>;
 	tx_delay = <0x20>;
 	status = "okay";
 };
@@ -680,19 +692,73 @@
 	};
 };
 
+&i2c2 {
+	status = "okay";
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		clock-output-names = "hym8563";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PA0 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtc_int>;
+		wakeup-source;
+		#clock-cells = <0>;
+	};
+};
+
 &mdio0 {
-	rgmii_phy0: phy@1 {
-		compatible = "ethernet-phy-ieee802.3-c22";
+	rgmii_phy0: ethernet-phy@1 {
+		compatible = "ethernet-phy-id001c.c916";
 		reg = <0x1>;
 		clocks = <&cru REFCLKO25M_GMAC0_OUT>;
+		assigned-clocks = <&cru REFCLKO25M_GMAC0_OUT>;
+		assigned-clock-rates = <25000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rgmii_phy0_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_LOW>;
 	};
 };
 
 &mdio1 {
-	rgmii_phy1: phy@1 {
-		compatible = "ethernet-phy-ieee802.3-c22";
+	rgmii_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id001c.c916";
 		reg = <0x1>;
 		clocks = <&cru REFCLKO25M_GMAC1_OUT>;
+		assigned-clocks = <&cru REFCLKO25M_GMAC1_OUT>;
+		assigned-clock-rates = <25000000>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rgmii_phy1_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pcie0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie0_rst>;
+	reset-gpios = <&gpio2 RK_PB4 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc_3v3_s3>;
+	status = "okay";
+
+	pcie@0,0 {
+		reg = <0x0 0 0 0 0>;
+		bus-range = <0x0 0xf>;
+		device_type = "pci";
+		ranges;
+		#address-cells = <3>;
+		#size-cells = <2>;
+
+		wifi: wifi@0,0 {
+			compatible = "pci14e4,449d";
+			reg = <0x10000 0 0 0 0>;
+			clocks = <&hym8563>;
+			clock-names = "lpo";
+		};
 	};
 };
 
@@ -708,6 +774,42 @@
 };
 
 &pinctrl {
+	bluetooth {
+		bt_reg_on: bt-reg-on {
+			rockchip,pins = <1 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		bt_wake_host: bt-wake-host {
+			rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+
+		host_wake_bt: host-wake-bt {
+			rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	hym8563 {
+		rtc_int: rtc-int {
+			rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	network {
+		rgmii_phy0_rst: rgmii-phy0-rst {
+			rockchip,pins = <2 RK_PB5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		rgmii_phy1_rst: rgmii-phy1-rst {
+			rockchip,pins = <3 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	pcie0 {
+		pcie0_rst: pcie0-rst {
+			rockchip,pins = <2 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	usb {
 		usb_host_pwren: usb-host-pwren {
 			rockchip,pins = <0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -721,6 +823,28 @@
 			rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
 	};
+
+	wifi {
+		wifi_reg_on: wifi-reg-on {
+			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+
+		wifi_wake_host: wifi-wake-host {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_down>;
+		};
+	};
+};
+
+&sdhci {
+	bus-width = <8>;
+	full-pwr-cycle-in-suspend;
+	max-frequency = <200000000>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	no-sdio;
+	no-sd;
+	non-removable;
+	status = "okay";
 };
 
 &sdmmc {
@@ -763,6 +887,27 @@
 	status = "okay";
 };
 
+&uart4 {
+	pinctrl-0 = <&uart4m1_xfer &uart4m1_ctsn &uart4m1_rtsn>;
+	pinctrl-names = "default";
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "brcm,bcm43438-bt";
+		clocks = <&hym8563>;
+		clock-names = "lpo";
+		device-wakeup-gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB1 IRQ_TYPE_LEVEL_HIGH>;
+		pinctrl-0 = <&bt_reg_on &bt_wake_host &host_wake_bt>;
+		pinctrl-names = "default";
+		shutdown-gpios = <&gpio1 RK_PC7 GPIO_ACTIVE_HIGH>;
+		vbat-supply = <&vcc_3v3_s3>;
+		vddio-supply = <&vcc_1v8_s3>;
+	};
+};
+
 &ufshc {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3576-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3576-roc-pc.dts
index d4e437ea6cd8..d0ab1d1e0e11 100644
--- a/arch/arm64/boot/dts/rockchip/rk3576-roc-pc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3576-roc-pc.dts
@@ -107,6 +107,18 @@
 		vin-supply = <&vcc_1v8_s3>;
 	};
 
+	vcc3v3_lcd_s0: regulator-vcc3v3-lcd-s0 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&lcd_pwren_h>;
+		regulator-name = "vcc3v3-lcd-s0";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
 	vcc3v3_pcie: regulator-vcc3v3-pcie {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -715,6 +727,10 @@
 	};
 
 	power {
+		lcd_pwren_h: lcd-pwren-h {
+			rockchip,pins = <0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
 		vcc5vd_en: vcc5vd-en {
 			rockchip,pins = <2 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
diff --git a/arch/arm64/boot/dts/rockchip/rk3576.dtsi b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
index c3cdae8a5494..fc4e9e07f1cf 100644
--- a/arch/arm64/boot/dts/rockchip/rk3576.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
@@ -11,6 +11,7 @@
 #include <dt-bindings/power/rockchip,rk3576-power.h>
 #include <dt-bindings/reset/rockchip,rk3576-cru.h>
 #include <dt-bindings/soc/rockchip,boot-mode.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	compatible = "rockchip,rk3576";
@@ -113,9 +114,9 @@
 			capacity-dmips-mhz = <485>;
 			clocks = <&scmi_clk SCMI_ARMCLK_L>;
 			operating-points-v2 = <&cluster0_opp_table>;
-			#cooling-cells = <2>;
 			dynamic-power-coefficient = <120>;
 			cpu-idle-states = <&CPU_SLEEP>;
+			#cooling-cells = <2>;
 		};
 
 		cpu_l1: cpu@1 {
@@ -127,6 +128,7 @@
 			clocks = <&scmi_clk SCMI_ARMCLK_L>;
 			operating-points-v2 = <&cluster0_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP>;
+			#cooling-cells = <2>;
 		};
 
 		cpu_l2: cpu@2 {
@@ -138,6 +140,7 @@
 			clocks = <&scmi_clk SCMI_ARMCLK_L>;
 			operating-points-v2 = <&cluster0_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP>;
+			#cooling-cells = <2>;
 		};
 
 		cpu_l3: cpu@3 {
@@ -149,6 +152,7 @@
 			clocks = <&scmi_clk SCMI_ARMCLK_L>;
 			operating-points-v2 = <&cluster0_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP>;
+			#cooling-cells = <2>;
 		};
 
 		cpu_b0: cpu@100 {
@@ -159,9 +163,9 @@
 			capacity-dmips-mhz = <1024>;
 			clocks = <&scmi_clk SCMI_ARMCLK_B>;
 			operating-points-v2 = <&cluster1_opp_table>;
-			#cooling-cells = <2>;
 			dynamic-power-coefficient = <320>;
 			cpu-idle-states = <&CPU_SLEEP>;
+			#cooling-cells = <2>;
 		};
 
 		cpu_b1: cpu@101 {
@@ -173,6 +177,7 @@
 			clocks = <&scmi_clk SCMI_ARMCLK_B>;
 			operating-points-v2 = <&cluster1_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP>;
+			#cooling-cells = <2>;
 		};
 
 		cpu_b2: cpu@102 {
@@ -184,6 +189,7 @@
 			clocks = <&scmi_clk SCMI_ARMCLK_B>;
 			operating-points-v2 = <&cluster1_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP>;
+			#cooling-cells = <2>;
 		};
 
 		cpu_b3: cpu@103 {
@@ -195,6 +201,7 @@
 			clocks = <&scmi_clk SCMI_ARMCLK_B>;
 			operating-points-v2 = <&cluster1_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP>;
+			#cooling-cells = <2>;
 		};
 
 		idle-states {
@@ -520,6 +527,143 @@
 		method = "smc";
 	};
 
+	thermal_zones: thermal-zones {
+		/* sensor near the center of the SoC */
+		package_thermal: package-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsadc 0>;
+
+			trips {
+				package_crit: package-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		/* sensor for cluster1 (big Cortex-A72 cores) */
+		bigcore_thermal: bigcore-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsadc 1>;
+
+			trips {
+				bigcore_alert: bigcore-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				bigcore_crit: bigcore-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&bigcore_alert>;
+					cooling-device =
+						<&cpu_b0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu_b1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu_b2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu_b3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		/* sensor for cluster0 (little Cortex-A53 cores) */
+		littlecore_thermal: littlecore-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsadc 2>;
+
+			trips {
+				littlecore_alert: littlecore-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				littlecore_crit: littlecore-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&littlecore_alert>;
+					cooling-device =
+						<&cpu_l0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu_l1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu_l2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&cpu_l3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		gpu_thermal: gpu-thermal {
+			polling-delay-passive = <100>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsadc 3>;
+
+			trips {
+				gpu_alert: gpu-alert {
+					temperature = <85000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				gpu_crit: gpu-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+
+			cooling-maps {
+				map0 {
+					trip = <&gpu_alert>;
+					cooling-device =
+						<&gpu THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+
+		npu_thermal: npu-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsadc 4>;
+
+			trips {
+				npu_crit: npu-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+
+		ddr_thermal: ddr-thermal {
+			polling-delay-passive = <0>;
+			polling-delay = <0>;
+			thermal-sensors = <&tsadc 5>;
+
+			trips {
+				ddr_crit: ddr-crit {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "critical";
+				};
+			};
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>,
@@ -822,6 +966,12 @@
 			reg = <0x0 0x26032000 0x0 0x100>;
 		};
 
+		mipidcphy_grf: syscon@26034000 {
+			compatible = "rockchip,rk3576-dcphy-grf", "syscon";
+			reg = <0x0 0x26034000 0x0 0x2000>;
+			clocks = <&cru PCLK_PMUPHY_ROOT>;
+		};
+
 		vo1_grf: syscon@26036000 {
 			compatible = "rockchip,rk3576-vo1-grf", "syscon";
 			reg = <0x0 0x26036000 0x0 0x100>;
@@ -1239,6 +1389,34 @@
 			status = "disabled";
 		};
 
+		dsi: dsi@27d80000 {
+			compatible = "rockchip,rk3576-mipi-dsi2";
+			reg = <0x0 0x27d80000 0x0 0x10000>;
+			interrupts = <GIC_SPI 345 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru PCLK_DSIHOST0>, <&cru CLK_DSIHOST0>;
+			clock-names = "pclk", "sys";
+			power-domains = <&power RK3576_PD_VO0>;
+			resets = <&cru SRST_P_DSIHOST0>;
+			reset-names = "apb";
+			phys = <&mipidcphy PHY_TYPE_DPHY>;
+			phy-names = "dcphy";
+			rockchip,grf = <&vo0_grf>;
+			status = "disabled";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				dsi_in: port@0 {
+					reg = <0>;
+				};
+
+				dsi_out: port@1 {
+					reg = <1>;
+				};
+			};
+		};
+
 		hdmi: hdmi@27da0000 {
 			compatible = "rockchip,rk3576-dw-hdmi-qp";
 			reg = <0x0 0x27da0000 0x0 0x20000>;
@@ -1793,6 +1971,30 @@
 			log_leakage: log-leakage@22 {
 				reg = <0x22 0x1>;
 			};
+			bigcore_tsadc_trim: bigcore-tsadc-trim@24 {
+				reg = <0x24 0x2>;
+				bits = <0 10>;
+			};
+			litcore_tsadc_trim: litcore-tsadc-trim@26 {
+				reg = <0x26 0x2>;
+				bits = <0 10>;
+			};
+			ddr_tsadc_trim: ddr-tsadc-trim@28 {
+				reg = <0x28 0x2>;
+				bits = <0 10>;
+			};
+			npu_tsadc_trim: npu-tsadc-trim@2a {
+				reg = <0x2a 0x2>;
+				bits = <0 10>;
+			};
+			gpu_tsadc_trim: gpu-tsadc-trim@2c {
+				reg = <0x2c 0x2>;
+				bits = <0 10>;
+			};
+			soc_tsadc_trim: soc-tsadc-trim@64 {
+				reg = <0x64 0x2>;
+				bits = <0 10>;
+			};
 		};
 
 		sai0: sai@2a600000 {
@@ -2073,7 +2275,6 @@
 			clocks = <&cru TCLK_WDT0>, <&cru PCLK_WDT0>;
 			clock-names = "tclk", "pclk";
 			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
-			status = "disabled";
 		};
 
 		spi0: spi@2acf0000 {
@@ -2303,6 +2504,55 @@
 			status = "disabled";
 		};
 
+		tsadc: tsadc@2ae70000 {
+			compatible = "rockchip,rk3576-tsadc";
+			reg = <0x0 0x2ae70000 0x0 0x400>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cru CLK_TSADC>, <&cru PCLK_TSADC>;
+			clock-names = "tsadc", "apb_pclk";
+			assigned-clocks = <&cru CLK_TSADC>;
+			assigned-clock-rates = <2000000>;
+			resets = <&cru SRST_P_TSADC>, <&cru SRST_TSADC>;
+			reset-names = "tsadc-apb", "tsadc";
+			#thermal-sensor-cells = <1>;
+			rockchip,hw-tshut-temp = <120000>;
+			rockchip,hw-tshut-mode = <0>; /* tshut mode 0:CRU 1:GPIO */
+			rockchip,hw-tshut-polarity = <0>; /* tshut polarity 0:LOW 1:HIGH */
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			sensor@0 {
+				reg = <0>;
+				nvmem-cells = <&soc_tsadc_trim>;
+				nvmem-cell-names = "trim";
+			};
+			sensor@1 {
+				reg = <1>;
+				nvmem-cells = <&bigcore_tsadc_trim>;
+				nvmem-cell-names = "trim";
+			};
+			sensor@2 {
+				reg = <2>;
+				nvmem-cells = <&litcore_tsadc_trim>;
+				nvmem-cell-names = "trim";
+			};
+			sensor@3 {
+				reg = <3>;
+				nvmem-cells = <&ddr_tsadc_trim>;
+				nvmem-cell-names = "trim";
+			};
+			sensor@4 {
+				reg = <4>;
+				nvmem-cells = <&npu_tsadc_trim>;
+				nvmem-cell-names = "trim";
+			};
+			sensor@5 {
+				reg = <5>;
+				nvmem-cells = <&gpu_tsadc_trim>;
+				nvmem-cell-names = "trim";
+			};
+		};
+
 		i2c9: i2c@2ae80000 {
 			compatible = "rockchip,rk3576-i2c", "rockchip,rk3399-i2c";
 			reg = <0x0 0x2ae80000 0x0 0x1000>;
@@ -2346,6 +2596,22 @@
 			status = "disabled";
 		};
 
+		mipidcphy: phy@2b020000 {
+			compatible = "rockchip,rk3576-mipi-dcphy";
+			reg = <0x0 0x2b020000 0x0 0x10000>;
+			clocks = <&cru PCLK_MIPI_DCPHY>,
+				 <&cru CLK_PHY_REF_SRC>;
+			clock-names = "pclk", "ref";
+			resets = <&cru SRST_M_MIPI_DCPHY>,
+				 <&cru SRST_P_MIPI_DCPHY>,
+				 <&cru SRST_P_DCPHY_GRF>,
+				 <&cru SRST_S_MIPI_DCPHY>;
+			reset-names = "m_phy", "apb", "grf", "s_phy";
+			rockchip,grf = <&mipidcphy_grf>;
+			#phy-cells = <1>;
+			status = "disabled";
+		};
+
 		combphy0_ps: phy@2b050000 {
 			compatible = "rockchip,rk3576-naneng-combphy";
 			reg = <0x0 0x2b050000 0x0 0x100>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3582-radxa-e52c.dts b/arch/arm64/boot/dts/rockchip/rk3582-radxa-e52c.dts
index e04f21d8c831..854c118418eb 100644
--- a/arch/arm64/boot/dts/rockchip/rk3582-radxa-e52c.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3582-radxa-e52c.dts
@@ -42,7 +42,7 @@
 	keys-1 {
 		compatible = "gpio-keys";
 		pinctrl-names = "default";
-		pinctrl-0 = <&btn_0>;
+		pinctrl-0 = <&pwm15_ir_m1>;
 
 		button-1 {
 			label = "User";
@@ -55,7 +55,7 @@
 	leds-0 {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
-		pinctrl-0 = <&led_0>;
+		pinctrl-0 = <&power_led>;
 
 		led-0 {
 			color = <LED_COLOR_ID_GREEN>;
@@ -71,7 +71,7 @@
 
 		led-1 {
 			color = <LED_COLOR_ID_GREEN>;
-			default-state = "on";
+			default-state = "off";
 			function = LED_FUNCTION_LAN;
 			linux,default-trigger = "netdev";
 			pwms = <&pwm14 0 1000000 PWM_POLARITY_INVERTED>;
@@ -80,7 +80,7 @@
 
 		led-2 {
 			color = <LED_COLOR_ID_GREEN>;
-			default-state = "on";
+			default-state = "off";
 			function = LED_FUNCTION_WAN;
 			linux,default-trigger = "netdev";
 			pwms = <&pwm11 0 1000000 PWM_POLARITY_INVERTED>;
@@ -98,16 +98,6 @@
 		vin-supply = <&vcc_sysin>;
 	};
 
-	vcc_3v3_pmu: regulator-3v3-0 {
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_3v3_pmu";
-		regulator-always-on;
-		regulator-boot-on;
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vcc_3v3_s3>;
-	};
-
 	vcc_3v3_s0: regulator-3v3-1 {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc_3v3_s0";
@@ -250,6 +240,7 @@
 		compatible = "belling,bl24c16a", "atmel,24c16";
 		reg = <0x50>;
 		pagesize = <16>;
+		read-only;
 		vcc-supply = <&vcc_3v3_pmu>;
 	};
 };
@@ -311,13 +302,13 @@
 
 &pinctrl {
 	keys {
-		btn_0: button-0 {
+		pwm15_ir_m1: pwm15-ir-m1 {
 			rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	leds {
-		led_0: led-0 {
+		power_led: power-led {
 			rockchip,pins = <3 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
@@ -333,19 +324,19 @@
 	};
 
 	regulators {
-		vcc_5v0_pwren_h: regulator-5v0-1 {
+		vcc_5v0_pwren_h: vcc-5v0-pwren-h {
 			rockchip,pins = <4 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	rtc {
-		rtc_int_l: rtc-0 {
+		rtc_int_l: rtc-int-l {
 			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 
 	usb {
-		usb_otg_pwren_h: regulator-5v0-0 {
+		usb_otg_pwren_h: usb-otg-pwren-h {
 			rockchip,pins = <0 RK_PD4 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
@@ -537,7 +528,7 @@
 				};
 			};
 
-			vcc_3v3_s3: dcdc-reg8 {
+			vcc_3v3_s3: vcc_3v3_pmu: dcdc-reg8 {
 				regulator-name = "vcc_3v3_s3";
 				regulator-always-on;
 				regulator-boot-on;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
index 70f03e68ba55..e2500e31c434 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-base.dtsi
@@ -621,6 +621,16 @@
 		reg = <0x0 0xfd5b0000 0x0 0x1000>;
 	};
 
+	csidphy0_grf: syscon@fd5b4000 {
+		compatible = "rockchip,rk3588-csidphy-grf", "syscon";
+		reg = <0x0 0xfd5b4000 0x0 0x1000>;
+	};
+
+	csidphy1_grf: syscon@fd5b5000 {
+		compatible = "rockchip,rk3588-csidphy-grf", "syscon";
+		reg = <0x0 0xfd5b5000 0x0 0x1000>;
+	};
+
 	pipe_phy0_grf: syscon@fd5bc000 {
 		compatible = "rockchip,rk3588-pipe-phy-grf", "syscon";
 		reg = <0x0 0xfd5bc000 0x0 0x100>;
@@ -841,7 +851,7 @@
 			status = "okay";
 
 			/* These power domains are grouped by VD_NPU */
-			power-domain@RK3588_PD_NPU {
+			pd_npu: power-domain@RK3588_PD_NPU {
 				reg = <RK3588_PD_NPU>;
 				#power-domain-cells = <0>;
 				#address-cells = <1>;
@@ -1140,6 +1150,97 @@
 		};
 	};
 
+	rknn_core_0: npu@fdab0000 {
+		compatible = "rockchip,rk3588-rknn-core";
+		reg = <0x0 0xfdab0000 0x0 0x1000>,
+		      <0x0 0xfdab1000 0x0 0x1000>,
+		      <0x0 0xfdab3000 0x0 0x1000>;
+		reg-names = "pc", "cna", "core";
+		interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_NPU0>, <&cru HCLK_NPU0>,
+			 <&scmi_clk SCMI_CLK_NPU>, <&cru PCLK_NPU_ROOT>;
+		clock-names = "aclk", "hclk", "npu", "pclk";
+		assigned-clocks = <&scmi_clk SCMI_CLK_NPU>;
+		assigned-clock-rates = <200000000>;
+		resets = <&cru SRST_A_RKNN0>, <&cru SRST_H_RKNN0>;
+		reset-names = "srst_a", "srst_h";
+		power-domains = <&power RK3588_PD_NPUTOP>;
+		iommus = <&rknn_mmu_0>;
+		status = "disabled";
+	};
+
+	rknn_mmu_0: iommu@fdab9000 {
+		compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";
+		reg = <0x0 0xfdab9000 0x0 0x100>,
+		      <0x0 0xfdaba000 0x0 0x100>;
+		interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_NPU0>, <&cru HCLK_NPU0>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		power-domains = <&power RK3588_PD_NPUTOP>;
+		status = "disabled";
+	};
+
+	rknn_core_1: npu@fdac0000 {
+		compatible = "rockchip,rk3588-rknn-core";
+		reg = <0x0 0xfdac0000 0x0 0x1000>,
+		      <0x0 0xfdac1000 0x0 0x1000>,
+		      <0x0 0xfdac3000 0x0 0x1000>;
+		reg-names = "pc", "cna", "core";
+		interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_NPU1>, <&cru HCLK_NPU1>,
+			 <&scmi_clk SCMI_CLK_NPU>, <&cru PCLK_NPU_ROOT>;
+		clock-names = "aclk", "hclk", "npu", "pclk";
+		assigned-clocks = <&scmi_clk SCMI_CLK_NPU>;
+		assigned-clock-rates = <200000000>;
+		resets = <&cru SRST_A_RKNN1>, <&cru SRST_H_RKNN1>;
+		reset-names = "srst_a", "srst_h";
+		power-domains = <&power RK3588_PD_NPU1>;
+		iommus = <&rknn_mmu_1>;
+		status = "disabled";
+	};
+
+	rknn_mmu_1: iommu@fdac9000 {
+		compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";
+		reg = <0x0 0xfdaca000 0x0 0x100>;
+		interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_NPU1>, <&cru HCLK_NPU1>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		power-domains = <&power RK3588_PD_NPU1>;
+		status = "disabled";
+	};
+
+	rknn_core_2: npu@fdad0000 {
+		compatible = "rockchip,rk3588-rknn-core";
+		reg = <0x0 0xfdad0000 0x0 0x1000>,
+		      <0x0 0xfdad1000 0x0 0x1000>,
+		      <0x0 0xfdad3000 0x0 0x1000>;
+		reg-names = "pc", "cna", "core";
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_NPU2>, <&cru HCLK_NPU2>,
+			 <&scmi_clk SCMI_CLK_NPU>, <&cru PCLK_NPU_ROOT>;
+		clock-names = "aclk", "hclk", "npu", "pclk";
+		assigned-clocks = <&scmi_clk SCMI_CLK_NPU>;
+		assigned-clock-rates = <200000000>;
+		resets = <&cru SRST_A_RKNN2>, <&cru SRST_H_RKNN2>;
+		reset-names = "srst_a", "srst_h";
+		power-domains = <&power RK3588_PD_NPU2>;
+		iommus = <&rknn_mmu_2>;
+		status = "disabled";
+	};
+
+	rknn_mmu_2: iommu@fdad9000 {
+		compatible = "rockchip,rk3588-iommu", "rockchip,rk3568-iommu";
+		reg = <0x0 0xfdada000 0x0 0x100>;
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH 0>;
+		clocks = <&cru ACLK_NPU2>, <&cru HCLK_NPU2>;
+		clock-names = "aclk", "iface";
+		#iommu-cells = <0>;
+		power-domains = <&power RK3588_PD_NPU2>;
+		status = "disabled";
+	};
+
 	vpu121: video-codec@fdb50000 {
 		compatible = "rockchip,rk3588-vpu121", "rockchip,rk3568-vpu";
 		reg = <0x0 0xfdb50000 0x0 0x800>;
@@ -1472,6 +1573,36 @@
 		};
 	};
 
+	dp0: dp@fde50000 {
+		compatible = "rockchip,rk3588-dp";
+		reg = <0x0 0xfde50000 0x0 0x4000>;
+		interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH 0>;
+		assigned-clocks = <&cru CLK_AUX16M_0>;
+		assigned-clock-rates = <16000000>;
+		clocks = <&cru PCLK_DP0>, <&cru CLK_AUX16M_0>,
+			 <&cru CLK_DP0>, <&cru MCLK_I2S4_8CH_TX>,
+			 <&cru MCLK_SPDIF2_DP0>;
+		clock-names = "apb", "aux", "hdcp", "i2s", "spdif";
+		phys = <&usbdp_phy0 PHY_TYPE_DP>;
+		power-domains = <&power RK3588_PD_VO0>;
+		resets = <&cru SRST_DP0>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dp0_in: port@0 {
+				reg = <0>;
+			};
+
+			dp0_out: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
 	hdmi0: hdmi@fde80000 {
 		compatible = "rockchip,rk3588-dw-hdmi-qp";
 		reg = <0x0 0xfde80000 0x0 0x20000>;
@@ -3055,6 +3186,30 @@
 		status = "disabled";
 	};
 
+	csi_dphy0: phy@fedc0000 {
+		compatible = "rockchip,rk3588-csi-dphy";
+		reg = <0x0 0xfedc0000 0x0 0x8000>;
+		clocks = <&cru PCLK_CSIPHY0>;
+		clock-names = "pclk";
+		#phy-cells = <0>;
+		resets = <&cru SRST_P_CSIPHY0>, <&cru SRST_CSIPHY0>;
+		reset-names = "apb", "phy";
+		rockchip,grf = <&csidphy0_grf>;
+		status = "disabled";
+	};
+
+	csi_dphy1: phy@fedc8000 {
+		compatible = "rockchip,rk3588-csi-dphy";
+		reg = <0x0 0xfedc8000 0x0 0x8000>;
+		clocks = <&cru PCLK_CSIPHY1>;
+		clock-names = "pclk";
+		#phy-cells = <0>;
+		resets = <&cru SRST_P_CSIPHY1>, <&cru SRST_CSIPHY1>;
+		reset-names = "apb", "phy";
+		rockchip,grf = <&csidphy1_grf>;
+		status = "disabled";
+	};
+
 	combphy0_ps: phy@fee00000 {
 		compatible = "rockchip,rk3588-naneng-combphy";
 		reg = <0x0 0xfee00000 0x0 0x100>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi
index 90414486e466..6e5a58428bba 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-extra.dtsi
@@ -210,6 +210,36 @@
 		status = "disabled";
 	};
 
+	dp1: dp@fde60000 {
+		compatible = "rockchip,rk3588-dp";
+		reg = <0x0 0xfde60000 0x0 0x4000>;
+		interrupts = <GIC_SPI 162 IRQ_TYPE_LEVEL_HIGH 0>;
+		assigned-clocks = <&cru CLK_AUX16M_1>;
+		assigned-clock-rates = <16000000>;
+		clocks = <&cru PCLK_DP1>, <&cru CLK_AUX16M_1>,
+			 <&cru CLK_DP1>, <&cru MCLK_I2S8_8CH_TX>,
+			 <&cru MCLK_SPDIF5_DP1>;
+		clock-names = "apb", "aux", "hdcp", "i2s", "spdif";
+		phys = <&usbdp_phy1 PHY_TYPE_DP>;
+		power-domains = <&power RK3588_PD_VO0>;
+		resets = <&cru SRST_DP1>;
+		#sound-dai-cells = <0>;
+		status = "disabled";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dp1_in: port@0 {
+				reg = <0>;
+			};
+
+			dp1_out: port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
 	hdmi1: hdmi@fdea0000 {
 		compatible = "rockchip,rk3588-dw-hdmi-qp";
 		reg = <0x0 0xfdea0000 0x0 0x20000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
index 3d8b6f0c5541..fafeabe9adf9 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi
@@ -391,6 +391,17 @@
 	status = "okay";
 };
 
+&hdmi_receiver_cma {
+	status = "okay";
+};
+
+&hdmi_receiver {
+	hpd-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_hpd>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
 &hdptxphy0 {
 	status = "okay";
 };
@@ -629,6 +640,12 @@
 		};
 	};
 
+	hdmirx {
+		hdmirx_hpd: hdmirx-5v-detection {
+			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	headphone {
 		hp_det: hp-det {
 			rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
@@ -731,6 +748,7 @@
 		spi-max-frequency = <104000000>;
 		spi-rx-bus-width = <4>;
 		spi-tx-bus-width = <1>;
+		vcc-supply = <&vcc_1v8_s3>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
index 121e4d1c3fa5..9950d1147e12 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5-plus.dts
@@ -77,7 +77,7 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&hp_detect>;
 	simple-audio-card,aux-devs = <&speaker_amp>, <&headphone_amp>;
-	simple-audio-card,hp-det-gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_LOW>;
+	simple-audio-card,hp-det-gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>;
 	simple-audio-card,widgets =
 		"Microphone", "Onboard Microphone",
 		"Microphone", "Microphone Jack",
@@ -160,6 +160,17 @@
 	status = "okay";
 };
 
+&hdmi_receiver_cma {
+	status = "okay";
+};
+
+&hdmi_receiver {
+	hpd-gpios = <&gpio1 RK_PC6 GPIO_ACTIVE_LOW>;
+	pinctrl-0 = <&hdmim1_rx_cec &hdmim1_rx_hpdin &hdmim1_rx_scl &hdmim1_rx_sda &hdmirx_hpd>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
 &hdptxphy0 {
 	status = "okay";
 };
@@ -279,6 +290,12 @@
 		};
 	};
 
+	hdmirx {
+		hdmirx_hpd: hdmirx-5v-detection {
+			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	ir-receiver {
 		ir_receiver_pin: ir-receiver-pin {
 			rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi
index 91d56c34a1e4..3bceee948458 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-orangepi-5.dtsi
@@ -258,6 +258,28 @@
 	};
 };
 
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1m2_xfer>;
+	status = "okay";
+
+	vdd_npu_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_npu_s0";
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <950000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
 &i2c6 {
 	clock-frequency = <400000>;
 	status = "okay";
@@ -352,6 +374,40 @@
 	domain-supply = <&vdd_gpu_s0>;
 };
 
+&pd_npu {
+	domain-supply = <&vdd_npu_s0>;
+};
+
+&rknn_core_0 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_s0>;
+	status = "okay";
+};
+
+&rknn_core_1 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_s0>;
+	status = "okay";
+};
+
+&rknn_core_2 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_s0>;
+	status = "okay";
+};
+
+&rknn_mmu_0 {
+	status = "okay";
+};
+
+&rknn_mmu_1 {
+	status = "okay";
+};
+
+&rknn_mmu_2 {
+	status = "okay";
+};
+
 &saradc {
 	vref-supply = <&vcc_1v8_s0>;
 	status = "okay";
@@ -365,6 +421,8 @@
 	max-frequency = <200000000>;
 	mmc-hs400-1_8v;
 	mmc-hs400-enhanced-strobe;
+	vmmc-supply = <&vcc_3v3_s3>;
+	vqmmc-supply = <&vcc_1v8_s3>;
 	status = "okay";
 };
 
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts b/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts
index 78aaa6635b5d..b2336c36da01 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-quartzpro64.dts
@@ -415,6 +415,36 @@
 	status = "okay";
 };
 
+&rknn_core_0 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_mem_s0>;
+	status = "okay";
+};
+
+&rknn_core_1 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_mem_s0>;
+	status = "okay";
+};
+
+&rknn_core_2 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_mem_s0>;
+	status = "okay";
+};
+
+&rknn_mmu_0 {
+	status = "okay";
+};
+
+&rknn_mmu_1 {
+	status = "okay";
+};
+
+&rknn_mmu_2 {
+	status = "okay";
+};
+
 &saradc {
 	vref-supply = <&vcc_1v8_s0>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-roc-rt.dts b/arch/arm64/boot/dts/rockchip/rk3588-roc-rt.dts
new file mode 100644
index 000000000000..2d6fed2a84a3
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3588-roc-rt.dts
@@ -0,0 +1,1132 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2025 Firefly Technology Co. Ltd
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
+#include <dt-bindings/usb/pd.h>
+#include "rk3588.dtsi"
+
+/ {
+	model = "Firefly ROC-RK3588-RT";
+	compatible = "firefly,roc-rk3588-rt", "rockchip,rk3588";
+
+	aliases {
+		ethernet0 = &gmac0;
+		ethernet1 = &gmac1;
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
+	};
+
+	adc-keys-0 {
+		compatible = "adc-keys";
+		io-channels = <&saradc 1>;
+		io-channel-names = "buttons";
+		keyup-threshold-microvolt = <1800000>;
+		poll-interval = <100>;
+
+		button-recovery {
+			label = "Recovery";
+			linux,code = <KEY_VENDOR>;
+			press-threshold-microvolt = <17000>;
+		};
+	};
+
+	analog-sound {
+		compatible = "simple-audio-card";
+		pinctrl-0 = <&hp_detect>;
+		pinctrl-names = "default";
+		simple-audio-card,aux-devs = <&amp_headphones>;
+		simple-audio-card,format = "i2s";
+		simple-audio-card,hp-det-gpios = <&gpio1 RK_PC4 GPIO_ACTIVE_HIGH>;
+		simple-audio-card,mclk-fs = <384>;
+		simple-audio-card,name = "rockchip-es8388";
+		simple-audio-card,pin-switches = "Headphones";
+		simple-audio-card,routing =
+			"Speaker", "LOUT2",
+			"Speaker", "ROUT2",
+			"Headphones Amplifier INL", "LOUT1",
+			"Headphones Amplifier INR", "ROUT1",
+			"Headphones", "Headphones Amplifier OUTL",
+			"Headphones", "Headphones Amplifier OUTR",
+			"LINPUT1", "Microphone Jack",
+			"RINPUT1", "Microphone Jack",
+			"LINPUT2", "Onboard Microphone",
+			"RINPUT2", "Onboard Microphone";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Microphone", "Onboard Microphone",
+			"Headphone", "Headphones",
+			"Speaker", "Speaker";
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s0_8ch>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&es8388>;
+			system-clock-frequency = <12288000>;
+		};
+	};
+
+	amp_headphones: headphones-amplifier {
+		compatible = "simple-audio-amplifier";
+		enable-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&headphone_amplifier_en>;
+		sound-name-prefix = "Headphones Amplifier";
+	};
+
+	chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	fan: pwm-fan {
+		compatible = "pwm-fan";
+		cooling-levels = <0 70 75 80 100>;
+		#cooling-cells = <2>;
+		fan-supply = <&vcc5v0_sys>;
+		pwms = <&pwm15 0 50000 1>;
+	};
+
+	hdmi0-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi0_con_in: endpoint {
+				remote-endpoint = <&hdmi0_out_con>;
+			};
+		};
+	};
+
+	hdmi1-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi1_con_in: endpoint {
+				remote-endpoint = <&hdmi1_out_con>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&led_pins>;
+
+		power_led {
+			gpios = <&gpio1 RK_PD3 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
+
+		user_led {
+			gpios = <&gpio1 RK_PD2 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "disk-activity";
+		};
+	};
+
+	vbus5v0_typec: regulator-vbus5v0-typec {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA4 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&typec5v_pwren>;
+		regulator-name = "vbus5v0_typec";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc12v_dcin: regulator-vcc12v-dcin {
+		compatible = "regulator-fixed";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		regulator-name = "vcc12v_dcin";
+	};
+
+	vcc3v3_sata2: vcc3v3-sata2 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio2 RK_PB5 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vcc3v3_sata2";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc3v3_sd_s0: regulator-vcc3v3-sd-s0 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_HIGH>;
+		regulator-name = "vcc3v3_sd_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc_3v3_s3>;
+	};
+
+	vcc3v3_sys: regulator-vcc3v3-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc3v3_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc3v3_wlan: regulator-vcc3v3-wlan {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpios = <&gpio2 RK_PC3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&wifi_pwren>;
+		regulator-name = "vcc3v3_wlan";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vcc3v3_sys>;
+	};
+
+	vcc5v0_sys: regulator-vcc5v0-sys {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc5v0_sys";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc12v_dcin>;
+	};
+
+	vcc5v0_host: regulator-vcc5v0-host {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host_en>;
+		regulator-name = "vcc5v0_host";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc5v0_host3: regulator-vcc5v0-host3 {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PA2 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_host3_en>;
+		regulator-name = "vcc5v0_host3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
+	vcc_1v1_nldo_s3: regulator-vcc-1v1-nldo-s3 {
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v1_nldo_s3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1100000>;
+		regulator-max-microvolt = <1100000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+};
+
+&combphy0_ps {
+	status = "okay";
+};
+
+&combphy1_ps {
+	status = "okay";
+};
+
+&combphy2_psu {
+	status = "okay";
+};
+
+&cpu_b0 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b1 {
+	cpu-supply = <&vdd_cpu_big0_s0>;
+};
+
+&cpu_b2 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_b3 {
+	cpu-supply = <&vdd_cpu_big1_s0>;
+};
+
+&cpu_l0 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l1 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l2 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&cpu_l3 {
+	cpu-supply = <&vdd_cpu_lit_s0>;
+};
+
+&gmac0 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy0>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac0_miim
+		     &gmac0_tx_bus2
+		     &gmac0_rx_bus2
+		     &gmac0_rgmii_clk
+		     &gmac0_rgmii_bus>;
+	status = "okay";
+};
+
+&gmac1 {
+	clock_in_out = "output";
+	phy-handle = <&rgmii_phy1>;
+	phy-mode = "rgmii-id";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1_miim
+		     &gmac1_tx_bus2
+		     &gmac1_rx_bus2
+		     &gmac1_rgmii_clk
+		     &gmac1_rgmii_bus>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu_s0>;
+	sram-supply = <&vdd_gpu_mem_s0>;
+	status = "okay";
+};
+
+&hdmi0 {
+	status = "okay";
+};
+
+&hdmi0_in {
+	hdmi0_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi0>;
+	};
+};
+
+&hdmi0_out {
+	hdmi0_out_con: endpoint {
+		remote-endpoint = <&hdmi0_con_in>;
+	};
+};
+
+&hdmi0_sound {
+	status = "okay";
+};
+
+&hdmi1 {
+	status = "okay";
+};
+
+&hdmi1_in {
+	hdmi1_in_vp1: endpoint {
+		remote-endpoint = <&vp1_out_hdmi1>;
+	};
+};
+
+&hdmi1_out {
+	hdmi1_out_con: endpoint {
+		remote-endpoint = <&hdmi1_con_in>;
+	};
+};
+
+&hdmi1_sound {
+	status = "okay";
+};
+
+&hdptxphy0 {
+	status = "okay";
+};
+
+&hdptxphy1 {
+	status = "okay";
+};
+
+&i2c0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0m2_xfer>;
+	status = "okay";
+
+	/* pc9202 watchdog@3c with enable-gpio gpio0-c3 */
+
+	vdd_cpu_big0_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		regulator-name = "vdd_cpu_big0_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+		fcs,suspend-voltage-selector = <1>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+
+	vdd_cpu_big1_s0: regulator@43 {
+		compatible = "rockchip,rk8603", "rockchip,rk8602";
+		reg = <0x43>;
+		regulator-name = "vdd_cpu_big1_s0";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <1050000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+		fcs,suspend-voltage-selector = <1>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3m0_xfer>;
+	status = "okay";
+
+	es8388: audio-codec@11 {
+		compatible = "everest,es8388", "everest,es8328";
+		reg = <0x11>;
+		assigned-clocks = <&cru I2S0_8CH_MCLKOUT>;
+		assigned-clock-rates = <12288000>;
+		clocks = <&cru I2S0_8CH_MCLKOUT>;
+		AVDD-supply = <&vcc_1v8_s0>;
+		DVDD-supply = <&vcc_1v8_s0>;
+		HPVDD-supply = <&vcc_3v3_s0>;
+		PVDD-supply = <&vcc_1v8_s0>;
+		#sound-dai-cells = <0>;
+	};
+};
+
+&i2c6 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6m0_xfer>;
+
+	usbc0: usb-typec@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD3 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usbc0_int>;
+		vbus-supply = <&vbus5v0_typec>;
+
+		usb_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			data-role = "dual";
+			op-sink-microwatt = <1000000>;
+			power-role = "dual";
+			sink-pdos =
+				<PDO_FIXED(5000, 1000, PDO_FIXED_USB_COMM)>;
+			source-pdos =
+				<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			try-power-role = "source";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+
+					usbc0_orien_sw: endpoint {
+						remote-endpoint = <&usbdp_phy0_orientation_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+
+					usbc0_role_sw: endpoint {
+						remote-endpoint = <&dwc3_0_role_switch>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+
+					dp_altmode_mux: endpoint {
+						remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
+					};
+				};
+			};
+		};
+	};
+
+	hym8563: rtc@51 {
+		compatible = "haoyu,hym8563";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "hym8563";
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PB0 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&hym8563_int>;
+		wakeup-source;
+	};
+};
+
+&i2s0_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s0_lrck
+		     &i2s0_mclk
+		     &i2s0_sclk
+		     &i2s0_sdi0
+		     &i2s0_sdo0>;
+	status = "okay";
+};
+
+&i2s5_8ch {
+	status = "okay";
+};
+
+&i2s6_8ch {
+	status = "okay";
+};
+
+&mdio0 {
+	rgmii_phy0: ethernet-phy@1 {
+		compatible = "ethernet-phy-id001c.c916";
+		reg = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtl8211f_0_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@1 {
+		compatible = "ethernet-phy-id001c.c916";
+		reg = <0x1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&rtl8211f_1_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pcie2x1l0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2_0_rst>, <&pcie2_0_wake>, <&pcie2_0_clkreq>;
+	reset-gpios = <&gpio4 RK_PA5 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_wlan>;
+	status = "okay";
+};
+
+&pcie2x1l2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie2_2_rst>;
+	reset-gpios = <&gpio3 RK_PD1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pd_gpu {
+	domain-supply = <&vdd_gpu_s0>;
+};
+
+&pinctrl {
+	audio {
+		hp_detect: headphone-detect {
+			rockchip,pins = <1 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		headphone_amplifier_en: headphone-amplifier-en {
+			rockchip,pins = <1 RK_PD5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	gpio-leds {
+		led_pins: led-pins {
+			rockchip,pins =
+				<1 RK_PD3 RK_FUNC_GPIO &pcfg_pull_none>,
+				<1 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	hym8563 {
+		hym8563_int: hym8563-int {
+			rockchip,pins = <0 RK_PB0 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	pcie2 {
+		pcie2_0_rst: pcie2-0-rst {
+			rockchip,pins = <4 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		pcie2_0_wake: pcie2-0-wake {
+			rockchip,pins = <4 RK_PA4 4 &pcfg_pull_none>;
+		};
+
+		pcie2_0_clkreq: pcie2-0-clkreq {
+			rockchip,pins = <4 RK_PA3 4 &pcfg_pull_none>;
+		};
+
+		pcie2_2_rst: pcie2-2-rst {
+			rockchip,pins = <3 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	rtl8211f {
+		rtl8211f_0_rst: rtl8211f-0-rst {
+			rockchip,pins = <3 RK_PC0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+		rtl8211f_1_rst: rtl8211f-1-rst {
+			rockchip,pins = <3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vcc5v0_host3_en: vcc5v0-host3-en {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	usb-typec {
+		typec5v_pwren: typec5v-pwren {
+			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usbc0_int: usbc0-int {
+			rockchip,pins = <0 RK_PD3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+
+	wlan {
+		wifi_pwren: wifi-pwren {
+			rockchip,pins = <2 RK_PC3 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pwm15 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm15m2_pins>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&vcc_1v8_s0>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	mmc-hs400-1_8v;
+	mmc-hs400-enhanced-strobe;
+	no-sdio;
+	no-sd;
+	non-removable;
+	status = "okay";
+};
+
+&sdmmc {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	disable-wp;
+	max-frequency = <150000000>;
+	no-sdio;
+	no-mmc;
+	sd-uhs-sdr104;
+	vmmc-supply = <&vcc3v3_sd_s0>;
+	vqmmc-supply = <&vccio_sd_s0>;
+	status = "okay";
+};
+
+&spi2 {
+	assigned-clocks = <&cru CLK_SPI2>;
+	assigned-clock-rates = <200000000>;
+	num-cs = <1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi2m2_cs0 &spi2m2_pins>;
+	status = "okay";
+
+	pmic@0 {
+		compatible = "rockchip,rk806";
+		reg = <0x0>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pmic_pins>, <&rk806_dvs1_null>,
+			    <&rk806_dvs2_null>, <&rk806_dvs3_null>;
+		spi-max-frequency = <1000000>;
+		system-power-controller;
+
+		vcc1-supply = <&vcc5v0_sys>;
+		vcc2-supply = <&vcc5v0_sys>;
+		vcc3-supply = <&vcc5v0_sys>;
+		vcc4-supply = <&vcc5v0_sys>;
+		vcc5-supply = <&vcc5v0_sys>;
+		vcc6-supply = <&vcc5v0_sys>;
+		vcc7-supply = <&vcc5v0_sys>;
+		vcc8-supply = <&vcc5v0_sys>;
+		vcc9-supply = <&vcc5v0_sys>;
+		vcc10-supply = <&vcc5v0_sys>;
+		vcc11-supply = <&vcc_2v0_pldo_s3>;
+		vcc12-supply = <&vcc5v0_sys>;
+		vcc13-supply = <&vcc_1v1_nldo_s3>;
+		vcc14-supply = <&vcc_1v1_nldo_s3>;
+		vcca-supply = <&vcc5v0_sys>;
+
+		rk806_dvs1_null: dvs1-null-pins {
+			pins = "gpio_pwrctrl1";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs2_null: dvs2-null-pins {
+			pins = "gpio_pwrctrl2";
+			function = "pin_fun0";
+		};
+
+		rk806_dvs3_null: dvs3-null-pins {
+			pins = "gpio_pwrctrl3";
+			function = "pin_fun0";
+		};
+
+		regulators {
+			vdd_gpu_s0: vdd_gpu_mem_s0: dcdc-reg1 {
+				regulator-name = "vdd_gpu_s0";
+				regulator-boot-on;
+				regulator-enable-ramp-delay = <400>;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_cpu_lit_s0: vdd_cpu_lit_mem_s0: dcdc-reg2 {
+				regulator-name = "vdd_cpu_lit_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_log_s0: dcdc-reg3 {
+				regulator-name = "vdd_log_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <750000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			vdd_vdenc_s0: vdd_vdenc_mem_s0: dcdc-reg4 {
+				regulator-name = "vdd_vdenc_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <550000>;
+				regulator-max-microvolt = <950000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_ddr_s0: dcdc-reg5 {
+				regulator-name = "vdd_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <675000>;
+				regulator-max-microvolt = <900000>;
+				regulator-ramp-delay = <12500>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			vdd2_ddr_s3: dcdc-reg6 {
+				regulator-name = "vdd2_ddr_s3";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+				};
+			};
+
+			vcc_2v0_pldo_s3: dcdc-reg7 {
+				regulator-name = "vdd_2v0_pldo_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <2000000>;
+				regulator-max-microvolt = <2000000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <2000000>;
+				};
+			};
+
+			vcc_3v3_s3: dcdc-reg8 {
+				regulator-name = "vcc_3v3_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <3300000>;
+				};
+			};
+
+			vddq_ddr_s0: dcdc-reg9 {
+				regulator-name = "vddq_ddr_s0";
+				regulator-always-on;
+				regulator-boot-on;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s3: dcdc-reg10 {
+				regulator-name = "vcc_1v8_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avcc_1v8_s0: pldo-reg1 {
+				regulator-name = "avcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_1v8_s0: pldo-reg2 {
+				regulator-name = "vcc_1v8_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			avdd_1v2_s0: pldo-reg3 {
+				regulator-name = "avdd_1v2_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1200000>;
+				regulator-max-microvolt = <1200000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vcc_3v3_s0: pldo-reg4 {
+				regulator-name = "vcc_3v3_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vccio_sd_s0: pldo-reg5 {
+				regulator-name = "vccio_sd_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			pldo6_s3: pldo-reg6 {
+				regulator-name = "pldo6_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <1800000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <1800000>;
+				};
+			};
+
+			vdd_0v75_s3: nldo-reg1 {
+				regulator-name = "vdd_0v75_s3";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-on-in-suspend;
+					regulator-suspend-microvolt = <750000>;
+				};
+			};
+
+			avdd_ddr_pll_s0: nldo-reg2 {
+				regulator-name = "avdd_ddr_pll_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+					regulator-suspend-microvolt = <850000>;
+				};
+			};
+
+			avdd_0v75_s0: nldo-reg3 {
+				regulator-name = "avdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			avdd_0v85_s0: nldo-reg4 {
+				regulator-name = "avdd_0v85_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <850000>;
+				regulator-max-microvolt = <850000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+
+			vdd_0v75_s0: nldo-reg5 {
+				regulator-name = "vdd_0v75_s0";
+				regulator-always-on;
+				regulator-boot-on;
+				regulator-min-microvolt = <750000>;
+				regulator-max-microvolt = <750000>;
+
+				regulator-state-mem {
+					regulator-off-in-suspend;
+				};
+			};
+		};
+	};
+};
+
+&sata2 {
+	status = "okay";
+};
+
+&tsadc {
+	status = "okay";
+};
+
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+};
+
+&u2phy1_otg {
+	phy-supply = <&vcc5v0_host3>;
+	status = "okay";
+};
+
+&u2phy2 {
+	status = "okay";
+};
+
+&u2phy2_host {
+	phy-supply = <&vcc5v0_host>;
+	status = "okay";
+};
+
+&u2phy3 {
+	status = "okay";
+};
+
+&u2phy3_host {
+	phy-supply = <&vcc5v0_host3>;
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-0 = <&uart2m0_xfer>;
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	dr_mode = "otg";
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		dwc3_0_role_switch: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&usbc0_role_sw>;
+		};
+	};
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbdp_phy0 {
+	mode-switch;
+	orientation-switch;
+	sbu1-dc-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
+	sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbdp_phy0_orientation_switch: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&usbc0_orien_sw>;
+		};
+
+		usbdp_phy0_dp_altmode_mux: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&dp_altmode_mux>;
+		};
+	};
+};
+
+&usbdp_phy1 {
+	rockchip,dp-lane-mux = <2 3>;
+	status = "okay";
+};
+
+&vop {
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi0: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi0_in_vp0>;
+	};
+};
+
+&vp1 {
+	vp1_out_hdmi1: endpoint@ROCKCHIP_VOP2_EP_HDMI1 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI1>;
+		remote-endpoint = <&hdmi1_in_vp1>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts
index 7de17117df7a..bc8140883de4 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5-itx.dts
@@ -57,6 +57,31 @@
 			  "Headphone", "Headphones";
 	};
 
+	bridge {
+		compatible = "radxa,ra620";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				hdmi_bridge_in: endpoint {
+					remote-endpoint = <&dp1_out_con>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				hdmi_bridge_out: endpoint {
+					remote-endpoint = <&hdmi_con_in>;
+				};
+			};
+		};
+	};
+
 	gpio-leds {
 		compatible = "gpio-leds";
 		pinctrl-names = "default";
@@ -73,6 +98,17 @@
 		};
 	};
 
+	hdmi0-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_bridge_out>;
+			};
+		};
+	};
+
 	hdmi1-con {
 		compatible = "hdmi-connector";
 		type = "a";
@@ -268,6 +304,24 @@
 	cpu-supply = <&vdd_cpu_lit_s0>;
 };
 
+&dp1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&dp1m0_pins>;
+};
+
+&dp1_in {
+	dp1_in_vp2: endpoint {
+		remote-endpoint = <&vp2_out_dp1>;
+	};
+};
+
+&dp1_out {
+	dp1_out_con: endpoint {
+		remote-endpoint = <&hdmi_bridge_in>;
+	};
+};
+
 &gpu {
 	mali-supply = <&vdd_gpu_s0>;
 	status = "okay";
@@ -1261,3 +1315,10 @@
 		remote-endpoint = <&hdmi1_in_vp1>;
 	};
 };
+
+&vp2 {
+	vp2_out_dp1: endpoint@b {
+		reg = <ROCKCHIP_VOP2_EP_DP1>;
+		remote-endpoint = <&dp1_in_vp2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-5bp-5t.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-5bp-5t.dtsi
index 973d39a7e0e0..3bbe78810ec6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-5bp-5t.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-5bp-5t.dtsi
@@ -5,6 +5,7 @@
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/soc/rockchip,vop2.h>
+#include <dt-bindings/usb/pd.h>
 #include "rk3588.dtsi"
 
 / {
@@ -55,6 +56,18 @@
 		shutdown-gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
 	};
 
+	vbus5v0_typec: vbus5v0-typec {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio2 RK_PB6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vbus5v0_typec_en>;
+		regulator-name = "vbus5v0_typec";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_sys>;
+	};
+
 	vcc3v3_pcie2x1l0: regulator-vcc3v3-pcie2x1l0 {
 		compatible = "regulator-fixed";
 		enable-active-high;
@@ -268,6 +281,99 @@
 	};
 };
 
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c1m2_xfer>;
+	status = "okay";
+
+	vdd_npu_s0: regulator@42 {
+		compatible = "rockchip,rk8602";
+		reg = <0x42>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_npu_s0";
+		regulator-boot-on;
+		regulator-enable-ramp-delay = <500>;
+		regulator-min-microvolt = <550000>;
+		regulator-max-microvolt = <950000>;
+		regulator-ramp-delay = <2300>;
+		vin-supply = <&vcc5v0_sys>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		 };
+	};
+};
+
+&i2c4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c4m1_xfer>;
+	status = "okay";
+
+	usbc0: usb-typec@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <RK_PB4 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&usbc0_int>;
+		vbus-supply = <&vbus5v0_typec>;
+		/*
+		 * When the board is starting to send power-delivery messages
+		 * too late (5 seconds according to the specification), the
+		 * power-supply reacts with a hard-reset. That removes the
+		 * power from VBUS for some time, which resets te whole board.
+		 */
+		status = "fail";
+
+		usb_con: connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			data-role = "dual";
+			/* fusb302 supports PD Rev 2.0 Ver 1.2 */
+			pd-revision = /bits/ 8 <0x2 0x0 0x1 0x2>;
+			power-role = "sink";
+			try-power-role = "sink";
+			op-sink-microwatt = <1000000>;
+			sink-pdos =
+				<PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>,
+				<PDO_VAR(5000, 20000, 5000)>;
+
+			altmodes {
+				displayport {
+					svid = /bits/ 16 <0xff01>;
+					vdo = <0xffffffff>;
+				};
+			};
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					usbc0_hs: endpoint {
+						remote-endpoint = <&usb_host0_xhci_to_usbc0>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					usbc0_ss: endpoint {
+						remote-endpoint = <&usbdp_phy0_ss>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					usbc0_sbu: endpoint {
+						remote-endpoint = <&usbdp_phy0_sbu>;
+					};
+				};
+			};
+		};
+	};
+};
+
 &i2c6 {
 	status = "okay";
 
@@ -392,6 +498,10 @@
 	domain-supply = <&vdd_gpu_s0>;
 };
 
+&pd_npu {
+	domain-supply = <&vdd_npu_s0>;
+};
+
 &pinctrl {
 	hym8563 {
 		hym8563_int: hym8563-int {
@@ -418,12 +528,52 @@
 			rockchip,pins = <1 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
+
+	usb {
+		usbc0_int: usbc0-int {
+			rockchip,pins = <3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		vbus5v0_typec_en: vbus5v0-typec-en {
+			rockchip,pins = <2 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
 };
 
 &pwm1 {
 	status = "okay";
 };
 
+&rknn_core_0 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_s0>;
+	status = "okay";
+};
+
+&rknn_core_1 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_s0>;
+	status = "okay";
+};
+
+&rknn_core_2 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_s0>;
+	status = "okay";
+};
+
+&rknn_mmu_0 {
+	status = "okay";
+};
+
+&rknn_mmu_1 {
+	status = "okay";
+};
+
+&rknn_mmu_2 {
+	status = "okay";
+};
+
 &saradc {
 	vref-supply = <&avcc_1v8_s0>;
 	status = "okay";
@@ -803,6 +953,14 @@
 	status = "okay";
 };
 
+&u2phy0 {
+	status = "okay";
+};
+
+&u2phy0_otg {
+	status = "okay";
+};
+
 &u2phy1 {
 	status = "okay";
 };
@@ -830,6 +988,27 @@
 	status = "okay";
 };
 
+&usbdp_phy0 {
+	mode-switch;
+	orientation-switch;
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbdp_phy0_ss: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&usbc0_ss>;
+		};
+
+		usbdp_phy0_sbu: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&usbc0_sbu>;
+		};
+	};
+};
+
 &usbdp_phy1 {
 	status = "okay";
 };
@@ -842,6 +1021,17 @@
 	status = "okay";
 };
 
+&usb_host0_xhci {
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		usb_host0_xhci_to_usbc0: endpoint {
+			remote-endpoint = <&usbc0_hs>;
+		};
+	};
+};
+
 &usb_host1_ehci {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-plus.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-plus.dts
index 74c7b6502e4d..5e984a44120e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-plus.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b-plus.dts
@@ -99,12 +99,24 @@
 	};
 
 	usb {
+		usbc_sbu_dc: usbc-sbu-dc {
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>,
+					<0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
 		vcc5v0_host_en: vcc5v0-host-en {
 			rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 };
 
+&usbdp_phy0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usbc_sbu_dc>;
+	sbu1-dc-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
+	sbu2-dc-gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
+};
+
 &vcc5v0_host {
 	enable-active-high;
 	gpio = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
index 9407a7c9910a..8ef01010d985 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
@@ -38,12 +38,24 @@
 
 &pinctrl {
 	usb {
+		usbc_sbu_dc: usbc-sbu-dc {
+			rockchip,pins = <4 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>,
+					<4 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
 		vcc5v0_host_en: vcc5v0-host-en {
 			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
 };
 
+&usbdp_phy0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usbc_sbu_dc>;
+	sbu1-dc-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
+	sbu2-dc-gpios = <&gpio4 RK_PA7 GPIO_ACTIVE_HIGH>;
+};
+
 &vcc5v0_host {
 	enable-active-high;
 	gpio = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5t.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5t.dts
index 258c7400301d..c1763835f53d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5t.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5t.dts
@@ -68,6 +68,22 @@
 	status = "okay";
 };
 
+&pcie30phy {
+	data-lanes = <1 1 2 2>;
+};
+
+&pcie3x2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie3x2_rst>;
+	reset-gpios = <&gpio4 RK_PB0 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&vcc3v3_pcie30>;
+	status = "okay";
+};
+
+&pcie3x4 {
+	num-lanes = <2>;
+};
+
 &pinctrl {
 	hdmirx {
 		hdmirx_hpd: hdmirx-5v-detection {
@@ -90,11 +106,35 @@
 		};
 	};
 
+	pcie3 {
+		pcie3x2_rst: pcie3x2-rst {
+			rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	sound {
 		hp_detect: hp-detect {
 			rockchip,pins = <4 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>;
 		};
 	};
+
+	usb {
+		vcc5v0_host_en: vcc5v0-host-en {
+			rockchip,pins = <1 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+
+		usbc_sbu_dc: usbc-sbu-dc {
+			rockchip,pins = <0 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>,
+					<0 RK_PC5 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+};
+
+&usbdp_phy0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&usbc_sbu_dc>;
+	sbu1-dc-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_HIGH>;
+	sbu2-dc-gpios = <&gpio0 RK_PC5 GPIO_ACTIVE_HIGH>;
 };
 
 &vcc3v3_pcie2x1l0 {
@@ -103,3 +143,10 @@
 	pinctrl-0 = <&pcie2_0_vcc3v3_en>;
 	status = "okay";
 };
+
+&vcc5v0_host {
+	enable-active-high;
+	gpio = <&gpio1 RK_PA1 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&vcc5v0_host_en>;
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588j.dtsi b/arch/arm64/boot/dts/rockchip/rk3588j.dtsi
index 3045cb3bd68c..9884a5df47df 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588j.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588j.dtsi
@@ -28,7 +28,7 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp-1200000000{
+		opp-1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
 			opp-microvolt = <750000 750000 950000>;
 			clock-latency-ns = <40000>;
@@ -49,7 +49,7 @@
 		compatible = "operating-points-v2";
 		opp-shared;
 
-		opp-1200000000{
+		opp-1200000000 {
 			opp-hz = /bits/ 64 <1200000000>;
 			opp-microvolt = <750000 750000 950000>;
 			clock-latency-ns = <40000>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts b/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts
index b2947b36fada..189444d20779 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-coolpi-4b.dts
@@ -39,6 +39,18 @@
 		stdout-path = "serial2:1500000n8";
 	};
 
+	dp-con {
+		compatible = "dp-connector";
+		label = "DP OUT";
+		type = "mini";
+
+		port {
+			dp_con_in: endpoint {
+				remote-endpoint = <&dp0_out_con>;
+			};
+		};
+	};
+
 	hdmi-con {
 		compatible = "hdmi-connector";
 		type = "d";
@@ -215,6 +227,24 @@
 	cpu-supply = <&vdd_cpu_big1_s0>;
 };
 
+&dp0 {
+	pinctrl-0 = <&dp0m0_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&dp0_in {
+	dp0_in_vp2: endpoint {
+		remote-endpoint = <&vp2_out_dp0>;
+	};
+};
+
+&dp0_out {
+	dp0_out_con: endpoint {
+		remote-endpoint = <&dp_con_in>;
+	};
+};
+
 &gpu {
 	mali-supply = <&vdd_gpu_s0>;
 	status = "okay";
@@ -890,3 +920,10 @@
 		remote-endpoint = <&hdmi0_in_vp0>;
 	};
 };
+
+&vp2 {
+	vp2_out_dp0: endpoint@a {
+		reg = <ROCKCHIP_VOP2_EP_DP0>;
+		remote-endpoint = <&dp0_in_vp2>;
+	};
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts b/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts
index 55fc7cbef58d..f5894672fcbd 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-gameforce-ace.dts
@@ -612,6 +612,56 @@
 	pinctrl-0 = <&i2c6m3_xfer>;
 	status = "okay";
 
+	fusb302: typec@22 {
+		compatible = "fcs,fusb302";
+		reg = <0x22>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PC7 IRQ_TYPE_LEVEL_LOW>;
+		pinctrl-0 = <&usbc0_int>;
+		pinctrl-names = "default";
+		vbus-supply = <&usb_otg_vbus>;
+
+		connector {
+			compatible = "usb-c-connector";
+			data-role = "dual";
+			label = "USB-C";
+			op-sink-microwatt = <1000000>;
+			power-role = "dual";
+			self-powered;
+			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_FIXED(9000, 3000, PDO_FIXED_USB_COMM)
+				     PDO_FIXED(12000, 3000, PDO_FIXED_USB_COMM)>;
+			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;
+			try-power-role = "sink";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@0 {
+					reg = <0>;
+					usbc0_orien_sw: endpoint {
+						remote-endpoint = <&usbdp_phy0_orientation_switch>;
+					};
+				};
+
+				port@1 {
+					reg = <1>;
+					usbc0_role_sw: endpoint {
+						remote-endpoint = <&dwc3_0_role_switch>;
+					};
+				};
+
+				port@2 {
+					reg = <2>;
+					dp_altmode_mux: endpoint {
+						remote-endpoint = <&usbdp_phy0_dp_altmode_mux>;
+					};
+				};
+			};
+		};
+	};
+
 	rtc_hym8563: rtc@51 {
 		compatible = "haoyu,hym8563";
 		reg = <0x51>;
@@ -640,8 +690,34 @@
 			 0x2F 0x00 0x64 0xA5 0xB5 0x1C 0xF0 0x49>;
 		cellwise,monitor-interval-ms = <5000>;
 		monitored-battery = <&battery>;
+		power-supplies = <&bq25703>;
 		status = "okay";
 	};
+
+	bq25703: charger@6b {
+		compatible = "ti,bq25703a";
+		reg = <0x6b>;
+		input-current-limit-microamp = <5000000>;
+		interrupt-parent = <&gpio0>;
+		interrupts = <RK_PD5 IRQ_TYPE_LEVEL_LOW>;
+		monitored-battery = <&battery>;
+		pinctrl-0 = <&charger_int_h>;
+		pinctrl-names = "default";
+		power-supplies = <&fusb302>;
+
+		regulators {
+			usb_otg_vbus: vbus {
+				enable-gpios = <&gpio4 RK_PA6 GPIO_ACTIVE_HIGH>;
+				pinctrl-0 = <&boost_enable_h>;
+				pinctrl-names = "default";
+				regulator-max-microamp = <960000>;
+				regulator-max-microvolt = <5088000>;
+				regulator-min-microamp = <512000>;
+				regulator-min-microvolt = <4992000>;
+				regulator-name = "usb_otg_vbus";
+			};
+		};
+	};
 };
 
 &i2c7 {
@@ -853,6 +929,12 @@
 			rockchip,pins =
 				<0 RK_PC7 RK_FUNC_GPIO &pcfg_pull_up>;
 		};
+
+		usbc_sbu_dc: usbc-sbu-dc {
+			rockchip,pins =
+				<4 RK_PA0 RK_FUNC_GPIO &pcfg_pull_none>,
+				<4 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
 	};
 
 	vcc3v3-lcd {
@@ -1286,6 +1368,46 @@
 	};
 };
 
+&usb_host0_xhci {
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		dwc3_0_role_switch: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&usbc0_role_sw>;
+		};
+	};
+};
+
+&usbdp_phy0 {
+	mode-switch;
+	orientation-switch;
+	pinctrl-0 = <&usbc_sbu_dc>;
+	pinctrl-names = "default";
+	sbu1-dc-gpios = <&gpio4 RK_PA0 GPIO_ACTIVE_HIGH>;
+	sbu2-dc-gpios = <&gpio4 RK_PA1 GPIO_ACTIVE_HIGH>;
+	rockchip,dp-lane-mux = <2 3>;
+	status = "okay";
+
+	port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		usbdp_phy0_orientation_switch: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&usbc0_orien_sw>;
+		};
+
+		usbdp_phy0_dp_altmode_mux: endpoint@1 {
+			reg = <1>;
+			remote-endpoint = <&dp_altmode_mux>;
+		};
+	};
+};
+
 &vop {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
index fbf062ec3bf1..1b6a59f7cabc 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-nanopi-r6.dtsi
@@ -251,6 +251,10 @@
 	};
 };
 
+&hdmi0_sound {
+	status = "okay";
+};
+
 &hdptxphy0 {
 	status = "okay";
 };
@@ -335,6 +339,10 @@
 	};
 };
 
+&i2s5_8ch {
+	status = "okay";
+};
+
 &mdio1 {
 	rgmii_phy1: ethernet-phy@1 {
 		compatible = "ethernet-phy-id001c.c916";
@@ -363,6 +371,10 @@
 	domain-supply = <&vdd_gpu_s0>;
 };
 
+&pd_npu {
+	domain-supply = <&vdd_npu_s0>;
+};
+
 &pinctrl {
 	gpio-key {
 		key1_pin: key1-pin {
@@ -421,6 +433,36 @@
 	};
 };
 
+&rknn_core_0 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_s0>;
+	status = "okay";
+};
+
+&rknn_core_1 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_s0>;
+	status = "okay";
+};
+
+&rknn_core_2 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_s0>;
+	status = "okay";
+};
+
+&rknn_mmu_0 {
+	status = "okay";
+};
+
+&rknn_mmu_1 {
+	status = "okay";
+};
+
+&rknn_mmu_2 {
+	status = "okay";
+};
+
 &saradc {
 	vref-supply = <&avcc_1v8_s0>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi
index 4fedc50cce8c..dafad29f9854 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-orangepi-5.dtsi
@@ -42,9 +42,8 @@
 		simple-audio-card,bitclock-master = <&masterdai>;
 		simple-audio-card,format = "i2s";
 		simple-audio-card,frame-master = <&masterdai>;
-		simple-audio-card,hp-det-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_LOW>;
+		simple-audio-card,hp-det-gpios = <&gpio1 RK_PD5 GPIO_ACTIVE_HIGH>;
 		simple-audio-card,mclk-fs = <256>;
-		simple-audio-card,pin-switches = "Headphones";
 		simple-audio-card,routing =
 			"Headphones", "LOUT1",
 			"Headphones", "ROUT1",
@@ -377,6 +376,10 @@
 	domain-supply = <&vdd_gpu_s0>;
 };
 
+&pd_npu {
+	domain-supply = <&vdd_npu_s0>;
+};
+
 &pinctrl {
 	hym8563 {
 		hym8563_int: hym8563-int {
@@ -407,6 +410,36 @@
 	status = "okay";
 };
 
+&rknn_core_0 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_s0>;
+	status = "okay";
+};
+
+&rknn_core_1 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_s0>;
+	status = "okay";
+};
+
+&rknn_core_2 {
+	npu-supply = <&vdd_npu_s0>;
+	sram-supply = <&vdd_npu_s0>;
+	status = "okay";
+};
+
+&rknn_mmu_0 {
+	status = "okay";
+};
+
+&rknn_mmu_1 {
+	status = "okay";
+};
+
+&rknn_mmu_2 {
+	status = "okay";
+};
+
 &saradc {
 	vref-supply = <&avcc_1v8_s0>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-roc-pc.dts b/arch/arm64/boot/dts/rockchip/rk3588s-roc-pc.dts
index 7434ac39246f..7e179862da6e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-roc-pc.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-roc-pc.dts
@@ -320,9 +320,9 @@
 &i2c3 {
 	status = "okay";
 
-	es8388: audio-codec@10 {
+	es8388: audio-codec@11 {
 		compatible = "everest,es8388", "everest,es8328";
-		reg = <0x10>;
+		reg = <0x11>;
 		clocks = <&cru I2S1_8CH_MCLKOUT>;
 		AVDD-supply = <&vcc_3v3_s0>;
 		DVDD-supply = <&vcc_1v8_s0>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
index f894742b1ebe..19a08f7794e6 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
@@ -58,6 +58,13 @@
 			gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>;
 			linux,default-trigger = "heartbeat";
 		};
+
+		power-led {
+			color = <LED_COLOR_ID_GREEN>;
+			function = LED_FUNCTION_POWER;
+			gpios = <&gpio3 RK_PC4 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-on";
+		};
 	};
 
 	fan: pwm-fan {
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
index de219570bbc9..fc105d420db4 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld11-global.dts
@@ -68,7 +68,7 @@
 		compatible = "linux,spdif-dit";
 		#sound-dai-cells = <0>;
 
-		port@0 {
+		port {
 			spdif_tx: endpoint {
 				remote-endpoint = <&spdif_hiecout1>;
 			};
@@ -79,7 +79,7 @@
 		compatible = "linux,spdif-dit";
 		#sound-dai-cells = <0>;
 
-		port@0 {
+		port {
 			comp_spdif_tx: endpoint {
 				remote-endpoint = <&comp_spdif_hiecout1>;
 			};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts
index fba454adae7d..10efa747ed8b 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-akebi96.dts
@@ -74,7 +74,7 @@
 		compatible = "linux,spdif-dit";
 		#sound-dai-cells = <0>;
 
-		port@0 {
+		port {
 			spdif_tx: endpoint {
 				remote-endpoint = <&spdif_hiecout1>;
 			};
@@ -85,7 +85,7 @@
 		compatible = "linux,spdif-dit";
 		#sound-dai-cells = <0>;
 
-		port@0 {
+		port {
 			comp_spdif_tx: endpoint {
 				remote-endpoint = <&comp_spdif_hiecout1>;
 			};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
index 20e5fb724fae..3c4dcfb82ddf 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20-global.dts
@@ -68,7 +68,7 @@
 		compatible = "linux,spdif-dit";
 		#sound-dai-cells = <0>;
 
-		port@0 {
+		port {
 			spdif_tx: endpoint {
 				remote-endpoint = <&spdif_hiecout1>;
 			};
@@ -79,7 +79,7 @@
 		compatible = "linux,spdif-dit";
 		#sound-dai-cells = <0>;
 
-		port@0 {
+		port {
 			comp_spdif_tx: endpoint {
 				remote-endpoint = <&comp_spdif_hiecout1>;
 			};
diff --git a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
index 335093da6573..875b93856a64 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-ld20.dtsi
@@ -947,6 +947,7 @@
 
 			pcie_intc: legacy-interrupt-controller {
 				interrupt-controller;
+				#address-cells = <0>;
 				#interrupt-cells = <1>;
 				interrupt-parent = <&gic>;
 				interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
index d6e3cc6fdb25..4d6c3c2dbea6 100644
--- a/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
+++ b/arch/arm64/boot/dts/socionext/uniphier-pxs3.dtsi
@@ -921,6 +921,7 @@
 
 			pcie_intc: legacy-interrupt-controller {
 				interrupt-controller;
+				#address-cells = <0>;
 				#interrupt-cells = <1>;
 				interrupt-parent = <&gic>;
 				interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>;
diff --git a/arch/arm64/boot/dts/st/stm32mp231.dtsi b/arch/arm64/boot/dts/st/stm32mp231.dtsi
index 75697acd1345..88e214d395ab 100644
--- a/arch/arm64/boot/dts/st/stm32mp231.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp231.dtsi
@@ -1064,28 +1064,6 @@
 				st,bank-name = "GPIOI";
 				status = "disabled";
 			};
-
-			gpioj: gpio@442d0000 {
-				reg = <0x90000 0x400>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				clocks = <&scmi_clk CK_SCMI_GPIOJ>;
-				st,bank-name = "GPIOJ";
-				status = "disabled";
-			};
-
-			gpiok: gpio@442e0000 {
-				reg = <0xa0000 0x400>;
-				gpio-controller;
-				#gpio-cells = <2>;
-				interrupt-controller;
-				#interrupt-cells = <2>;
-				clocks = <&scmi_clk CK_SCMI_GPIOK>;
-				st,bank-name = "GPIOK";
-				status = "disabled";
-			};
 		};
 
 		rtc: rtc@46000000 {
diff --git a/arch/arm64/boot/dts/st/stm32mp235f-dk.dts b/arch/arm64/boot/dts/st/stm32mp235f-dk.dts
index 04d1b434c433..c3e688068223 100644
--- a/arch/arm64/boot/dts/st/stm32mp235f-dk.dts
+++ b/arch/arm64/boot/dts/st/stm32mp235f-dk.dts
@@ -19,6 +19,7 @@
 	compatible = "st,stm32mp235f-dk", "st,stm32mp235";
 
 	aliases {
+		ethernet0 = &ethernet1;
 		serial0 = &usart2;
 	};
 
@@ -56,7 +57,7 @@
 
 	memory@80000000 {
 		device_type = "memory";
-		reg = <0x0 0x80000000 0x1 0x0>;
+		reg = <0x0 0x80000000 0x0 0x80000000>;
 	};
 
 	reserved-memory {
@@ -77,6 +78,28 @@
 	status = "okay";
 };
 
+&ethernet1 {
+	pinctrl-0 = <&eth1_rgmii_pins_b>;
+	pinctrl-1 = <&eth1_rgmii_sleep_pins_b>;
+	pinctrl-names = "default", "sleep";
+	phy-handle = <&phy1_eth1>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy1_eth1: ethernet-phy@1 {
+			compatible = "ethernet-phy-id001c.c916";
+			reg = <1>;
+			reset-gpios =  <&gpioa 2 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
+		};
+	};
+};
+
 &scmi_regu {
 	scmi_vddio1: regulator@0 {
 		regulator-min-microvolt = <1800000>;
diff --git a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
index 5ac9e72478dd..e0d102eb6176 100644
--- a/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp25-pinctrl.dtsi
@@ -6,6 +6,132 @@
 #include <dt-bindings/pinctrl/stm32-pinfunc.h>
 
 &pinctrl {
+	eth1_mdio_pins_a: eth1-mdio-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 0, AF10)>; /* ETH_MDC */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <2>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('F', 2, AF10)>; /* ETH_MDIO */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <0>;
+		};
+	};
+
+	eth1_mdio_sleep_pins_a: eth1-mdio-sleep-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('F', 0, ANALOG)>, /* ETH_MDC */
+				 <STM32_PINMUX('F', 2, ANALOG)>; /* ETH_MDIO */
+		};
+	};
+
+	eth1_rgmii_pins_a: eth1-rgmii-0 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 15, AF10)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('C', 1, AF10)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('H', 10, AF10)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('H', 11, AF10)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('A', 13, AF10)>; /* ETH_RGMII_TX_CTL */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <3>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('H', 9, AF10)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('C', 0, AF12)>; /* ETH_RGMII_GTX_CLK */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <3>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('F', 1, AF10)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 2, AF10)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('H', 12, AF10)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('H', 13, AF10)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 11, AF10)>; /* ETH_RGMII_RX_CTL */
+			bias-disable;
+		};
+		pins4 {
+			pinmux = <STM32_PINMUX('A', 14, AF10)>; /* ETH_RGMII_RX_CLK */
+			bias-disable;
+		};
+	};
+
+	eth1_rgmii_sleep_pins_a: eth1-rgmii-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 15, ANALOG)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('H', 10, ANALOG)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('H', 11, ANALOG)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('A', 13, ANALOG)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('H', 9, ANALOG)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('C', 0, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('F', 1, ANALOG)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('H', 12, ANALOG)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('H', 13, ANALOG)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 11, ANALOG)>, /* ETH_RGMII_RX_CTL */
+				 <STM32_PINMUX('A', 14, ANALOG)>; /* ETH_RGMII_RX_CLK */
+		};
+	};
+
+	eth1_rgmii_pins_b: eth1-rgmii-1 {
+		pins1 {
+			pinmux = <STM32_PINMUX('A', 15, AF10)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('C', 1, AF10)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('H', 10, AF10)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('H', 11, AF10)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('A', 13, AF10)>; /* ETH_RGMII_TX_CTL */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <3>;
+		};
+		pins2 {
+			pinmux = <STM32_PINMUX('H', 9, AF10)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('C', 0, AF12)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('A', 9, AF10)>, /* ETH_MDC */
+				 <STM32_PINMUX('A', 10, AF10)>; /* ETH_MDIO */
+			bias-disable;
+			drive-push-pull;
+			slew-rate = <3>;
+		};
+		pins3 {
+			pinmux = <STM32_PINMUX('F', 1, AF10)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 2, AF10)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('H', 12, AF10)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('H', 13, AF10)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 11, AF10)>; /* ETH_RGMII_RX_CTL */
+			bias-disable;
+		};
+		pins4 {
+			pinmux = <STM32_PINMUX('A', 14, AF10)>; /* ETH_RGMII_RX_CLK */
+			bias-disable;
+		};
+	};
+
+	eth1_rgmii_sleep_pins_b: eth1-rgmii-sleep-1 {
+		pins {
+			pinmux = <STM32_PINMUX('A', 15, ANALOG)>, /* ETH_RGMII_TXD0 */
+				 <STM32_PINMUX('C', 1, ANALOG)>, /* ETH_RGMII_TXD1 */
+				 <STM32_PINMUX('H', 10, ANALOG)>, /* ETH_RGMII_TXD2 */
+				 <STM32_PINMUX('H', 11, ANALOG)>, /* ETH_RGMII_TXD3 */
+				 <STM32_PINMUX('A', 13, ANALOG)>, /* ETH_RGMII_TX_CTL */
+				 <STM32_PINMUX('H', 9, ANALOG)>, /* ETH_RGMII_CLK125 */
+				 <STM32_PINMUX('C', 0, ANALOG)>, /* ETH_RGMII_GTX_CLK */
+				 <STM32_PINMUX('A', 9, ANALOG)>, /* ETH_MDC */
+				 <STM32_PINMUX('A', 10, ANALOG)>, /* ETH_MDIO */
+				 <STM32_PINMUX('F', 1, ANALOG)>, /* ETH_RGMII_RXD0 */
+				 <STM32_PINMUX('C', 2, ANALOG)>, /* ETH_RGMII_RXD1 */
+				 <STM32_PINMUX('H', 12, ANALOG)>, /* ETH_RGMII_RXD2 */
+				 <STM32_PINMUX('H', 13, ANALOG)>, /* ETH_RGMII_RXD3 */
+				 <STM32_PINMUX('A', 11, ANALOG)>, /* ETH_RGMII_RX_CTL */
+				 <STM32_PINMUX('A', 14, AF10)>; /* ETH_RGMII_RX_CLK */
+		};
+	};
+
 	eth2_rgmii_pins_a: eth2-rgmii-0 {
 		pins1 {
 			pinmux = <STM32_PINMUX('C', 7, AF10)>, /* ETH_RGMII_TXD0 */
@@ -133,6 +259,26 @@
 		};
 	};
 
+	pcie_pins_a: pcie-0 {
+		pins {
+			pinmux = <STM32_PINMUX('J', 0, AF4)>;
+			bias-disable;
+		};
+	};
+
+	pcie_init_pins_a: pcie-init-0 {
+		pins {
+			pinmux = <STM32_PINMUX('J', 0, GPIO)>;
+			output-low;
+		};
+	};
+
+	pcie_sleep_pins_a: pcie-sleep-0 {
+		pins {
+			pinmux = <STM32_PINMUX('J', 0, ANALOG)>;
+		};
+	};
+
 	pwm3_pins_a: pwm3-0 {
 		pins {
 			pinmux = <STM32_PINMUX('B', 15, AF7)>; /* TIM3_CH2 */
diff --git a/arch/arm64/boot/dts/st/stm32mp251.dtsi b/arch/arm64/boot/dts/st/stm32mp251.dtsi
index 303abf915b8e..a8e6e0f77b83 100644
--- a/arch/arm64/boot/dts/st/stm32mp251.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp251.dtsi
@@ -52,6 +52,12 @@
 			compatible = "fixed-clock";
 			clock-frequency = <64000000>;
 		};
+
+		clk_flexgen_27_fixed: clk-54000000 {
+			#clock-cells = <0>;
+			compatible = "fixed-clock";
+			clock-frequency = <54000000>;
+		};
 	};
 
 	firmware {
@@ -122,6 +128,15 @@
 		      <0x0 0x4ac20000 0x0 0x20000>,
 		      <0x0 0x4ac40000 0x0 0x20000>,
 		      <0x0 0x4ac60000 0x0 0x20000>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		v2m0: v2m@48090000 {
+			compatible = "arm,gic-v2m-frame";
+			reg = <0x0 0x48090000 0x0 0x1000>;
+			msi-controller;
+		};
 	};
 
 	psci {
@@ -1553,6 +1568,18 @@
 				};
 			};
 
+			ltdc: display-controller@48010000 {
+				compatible = "st,stm32mp251-ltdc";
+				reg = <0x48010000 0x400>;
+				interrupts = <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
+					<GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&rcc CK_KER_LTDC>, <&rcc CK_BUS_LTDC>;
+				clock-names = "lcd", "bus";
+				resets = <&rcc LTDC_R>;
+				access-controllers = <&rifsc 80>;
+				status = "disabled";
+			};
+
 			csi: csi@48020000 {
 				compatible = "st,stm32mp25-csi";
 				reg = <0x48020000 0x2000>;
@@ -1654,6 +1681,56 @@
 					snps,wr_osr_lmt = <0x7>;
 				};
 			};
+
+			pcie_ep: pcie-ep@48400000 {
+				compatible = "st,stm32mp25-pcie-ep";
+				reg = <0x48400000 0x100000>,
+				      <0x48500000 0x100000>,
+				      <0x48700000 0x80000>,
+				      <0x10000000 0x10000000>;
+				reg-names = "dbi", "dbi2", "atu", "addr_space";
+				clocks = <&rcc CK_BUS_PCIE>;
+				resets = <&rcc PCIE_R>;
+				phys = <&combophy PHY_TYPE_PCIE>;
+				access-controllers = <&rifsc 68>;
+				power-domains = <&CLUSTER_PD>;
+				status = "disabled";
+			};
+
+			pcie_rc: pcie@48400000 {
+				compatible = "st,stm32mp25-pcie-rc";
+				device_type = "pci";
+				reg = <0x48400000 0x400000>,
+				      <0x10000000 0x10000>;
+				reg-names = "dbi", "config";
+				#interrupt-cells = <1>;
+				interrupt-map-mask = <0 0 0 7>;
+				interrupt-map = <0 0 0 1 &intc 0 0 GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>,
+						<0 0 0 2 &intc 0 0 GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
+						<0 0 0 3 &intc 0 0 GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
+						<0 0 0 4 &intc 0 0 GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>;
+				#address-cells = <3>;
+				#size-cells = <2>;
+				ranges = <0x01000000 0x0 0x00000000 0x10010000 0x0 0x10000>,
+					 <0x02000000 0x0 0x10020000 0x10020000 0x0 0x7fe0000>,
+					 <0x42000000 0x0 0x18000000 0x18000000 0x0 0x8000000>;
+				dma-ranges = <0x42000000 0x0 0x80000000 0x80000000 0x0 0x80000000>;
+				clocks = <&rcc CK_BUS_PCIE>;
+				resets = <&rcc PCIE_R>;
+				msi-parent = <&v2m0>;
+				access-controllers = <&rifsc 68>;
+				power-domains = <&CLUSTER_PD>;
+				status = "disabled";
+
+				pcie@0,0 {
+					device_type = "pci";
+					reg = <0x0 0x0 0x0 0x0 0x0>;
+					phys = <&combophy PHY_TYPE_PCIE>;
+					#address-cells = <3>;
+					#size-cells = <2>;
+					ranges;
+				};
+			};
 		};
 
 		bsec: efuse@44000000 {
@@ -1672,6 +1749,13 @@
 			};
 		};
 
+		hdp: pinctrl@44090000 {
+			compatible = "st,stm32mp251-hdp";
+			reg = <0x44090000 0x400>;
+			clocks = <&rcc CK_BUS_HDP>;
+			status = "disabled";
+		};
+
 		rcc: clock-controller@44200000 {
 			compatible = "st,stm32mp25-rcc";
 			reg = <0x44200000 0x10000>;
@@ -1856,6 +1940,7 @@
 		syscfg: syscon@44230000 {
 			compatible = "st,stm32mp25-syscfg", "syscon";
 			reg = <0x44230000 0x10000>;
+			#clock-cells = <0>;
 		};
 
 		pinctrl: pinctrl@44240000 {
diff --git a/arch/arm64/boot/dts/st/stm32mp255.dtsi b/arch/arm64/boot/dts/st/stm32mp255.dtsi
index f689b47c5010..7a598f53a2a0 100644
--- a/arch/arm64/boot/dts/st/stm32mp255.dtsi
+++ b/arch/arm64/boot/dts/st/stm32mp255.dtsi
@@ -5,7 +5,25 @@
  */
 #include "stm32mp253.dtsi"
 
+&ltdc {
+	compatible = "st,stm32mp255-ltdc";
+	clocks = <&clk_flexgen_27_fixed>, <&rcc CK_BUS_LTDC>, <&syscfg>, <&lvds>;
+	clock-names = "lcd", "bus", "ref", "lvds";
+};
+
 &rifsc {
+	lvds: lvds@48060000 {
+		compatible = "st,stm32mp255-lvds", "st,stm32mp25-lvds";
+		reg = <0x48060000 0x2000>;
+		#clock-cells = <0>;
+		clocks = <&rcc CK_BUS_LVDS>, <&rcc CK_KER_LVDSPHY>;
+		clock-names = "pclk", "ref";
+		resets = <&rcc LVDS_R>;
+		access-controllers = <&rifsc 84>;
+		power-domains = <&CLUSTER_PD>;
+		status = "disabled";
+	};
+
 	vdec: vdec@480d0000 {
 		compatible = "st,stm32mp25-vdec";
 		reg = <0x480d0000 0x3c8>;
diff --git a/arch/arm64/boot/dts/st/stm32mp257f-dk.dts b/arch/arm64/boot/dts/st/stm32mp257f-dk.dts
index a278a1e3ce03..e718d888ce21 100644
--- a/arch/arm64/boot/dts/st/stm32mp257f-dk.dts
+++ b/arch/arm64/boot/dts/st/stm32mp257f-dk.dts
@@ -19,6 +19,7 @@
 	compatible = "st,stm32mp257f-dk", "st,stm32mp257";
 
 	aliases {
+		ethernet0 = &ethernet1;
 		serial0 = &usart2;
 	};
 
@@ -77,6 +78,28 @@
 	status = "okay";
 };
 
+&ethernet1 {
+	pinctrl-0 = <&eth1_rgmii_pins_b>;
+	pinctrl-1 = <&eth1_rgmii_sleep_pins_b>;
+	pinctrl-names = "default", "sleep";
+	phy-handle = <&phy1_eth1>;
+	phy-mode = "rgmii-id";
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy1_eth1: ethernet-phy@1 {
+			compatible = "ethernet-phy-id001c.c916";
+			reg = <1>;
+			reset-gpios =  <&gpioa 2 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
+		};
+	};
+};
+
 &scmi_regu {
 	scmi_vddio1: regulator@0 {
 		regulator-min-microvolt = <1800000>;
diff --git a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
index 836b1958ce65..6e165073f732 100644
--- a/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
+++ b/arch/arm64/boot/dts/st/stm32mp257f-ev1.dts
@@ -19,6 +19,7 @@
 
 	aliases {
 		ethernet0 = &ethernet2;
+		ethernet1 = &ethernet1;
 		serial0 = &usart2;
 		serial1 = &usart6;
 	};
@@ -70,6 +71,42 @@
 		reg = <0x0 0x80000000 0x1 0x0>;
 	};
 
+	panel_lvds: display {
+		compatible = "edt,etml0700z9ndha", "panel-lvds";
+		enable-gpios = <&gpiog 15 GPIO_ACTIVE_HIGH>;
+		backlight = <&panel_lvds_backlight>;
+		power-supply = <&scmi_v3v3>;
+		width-mm = <156>;
+		height-mm = <92>;
+		data-mapping = "vesa-24";
+		status = "okay";
+
+		panel-timing {
+			clock-frequency = <54000000>;
+			hactive = <1024>;
+			vactive = <600>;
+			hfront-porch = <150>;
+			hback-porch = <150>;
+			hsync-len = <21>;
+			vfront-porch = <24>;
+			vback-porch = <24>;
+			vsync-len = <21>;
+		};
+
+		port {
+			lvds_panel_in: endpoint {
+				remote-endpoint = <&lvds_out0>;
+			};
+		};
+	};
+
+	panel_lvds_backlight: backlight {
+		compatible = "gpio-backlight";
+		gpios = <&gpioi 5 GPIO_ACTIVE_HIGH>;
+		default-on;
+		status = "okay";
+	};
+
 	reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
@@ -100,7 +137,7 @@
 };
 
 &csi {
-	vdd-supply =  <&scmi_vddcore>;
+	vdd-supply = <&scmi_vddcore>;
 	vdda18-supply = <&scmi_v1v8>;
 	status = "okay";
 	ports {
@@ -133,6 +170,29 @@
 	};
 };
 
+&ethernet1 {
+	pinctrl-0 = <&eth1_rgmii_pins_a &eth1_mdio_pins_a>;
+	pinctrl-1 = <&eth1_rgmii_sleep_pins_a &eth1_mdio_sleep_pins_a>;
+	pinctrl-names = "default", "sleep";
+	phy-handle = <&phy1_eth1>;
+	phy-mode = "rgmii-id";
+	st,ext-phyclk;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		phy1_eth1: ethernet-phy@4 {
+			compatible = "ethernet-phy-id001c.c916";
+			reg = <4>;
+			reset-gpios =  <&gpioj 9 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <80000>;
+		};
+	};
+};
+
 &ethernet2 {
 	pinctrl-names = "default", "sleep";
 	pinctrl-0 = <&eth2_rgmii_pins_a>;
@@ -151,7 +211,7 @@
 			reg = <1>;
 			reset-assert-us = <10000>;
 			reset-deassert-us = <300>;
-			reset-gpios =  <&gpiog 6 GPIO_ACTIVE_LOW>;
+			reset-gpios = <&gpiog 6 GPIO_ACTIVE_LOW>;
 		};
 	};
 };
@@ -183,6 +243,15 @@
 			};
 		};
 	};
+
+	ili2511: ili2511@41 {
+		compatible = "ilitek,ili251x";
+		reg = <0x41>;
+		interrupt-parent = <&gpioi>;
+		interrupts = <13 IRQ_TYPE_EDGE_FALLING>;
+		reset-gpios = <&gpiog 14 GPIO_ACTIVE_LOW>;
+		status = "okay";
+	};
 };
 
 &i2c8 {
@@ -230,6 +299,58 @@
 	};
 };
 
+&ltdc {
+	status = "okay";
+	port {
+		ltdc_ep0_out: endpoint {
+			remote-endpoint = <&lvds_in>;
+		};
+	};
+};
+
+&lvds {
+	status = "okay";
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+			lvds_in: endpoint {
+				remote-endpoint = <&ltdc_ep0_out>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+			lvds_out0: endpoint {
+				remote-endpoint = <&lvds_panel_in>;
+			};
+		};
+	};
+};
+
+&pcie_ep {
+	pinctrl-names = "default", "init";
+	pinctrl-0 = <&pcie_pins_a>;
+	pinctrl-1 = <&pcie_init_pins_a>;
+	reset-gpios = <&gpioj 8 GPIO_ACTIVE_LOW>;
+	status = "disabled";
+};
+
+&pcie_rc {
+	pinctrl-names = "default", "init", "sleep";
+	pinctrl-0 = <&pcie_pins_a>;
+	pinctrl-1 = <&pcie_init_pins_a>;
+	pinctrl-2 = <&pcie_sleep_pins_a>;
+	status = "okay";
+
+	pcie@0,0 {
+		 reset-gpios = <&gpioj 8 GPIO_ACTIVE_LOW>;
+		 wake-gpios = <&gpioh 5 (GPIO_ACTIVE_LOW | GPIO_PULL_UP)>;
+	};
+};
+
 &rtc {
 	status = "okay";
 };
diff --git a/arch/arm64/boot/dts/tesla/fsd.dtsi b/arch/arm64/boot/dts/tesla/fsd.dtsi
index a5ebb3f9b18f..5b06e2667b89 100644
--- a/arch/arm64/boot/dts/tesla/fsd.dtsi
+++ b/arch/arm64/boot/dts/tesla/fsd.dtsi
@@ -363,6 +363,7 @@
 
 		gic: interrupt-controller@10400000 {
 			compatible = "arm,gic-v3";
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupt-controller;
 			reg = <0x0 0x10400000 0x0 0x10000>, /* GICD */
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index aad9177930e6..743115b849a7 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -28,6 +28,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am62x-phyboard-lyra-gpio-fan.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am62-lp-sk-nand.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am62-pocketbeagle2.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am6254atl-sk.dtb
 
 # Boards with AM62Ax SoC
 dtb-$(CONFIG_ARCH_K3) += k3-am62a7-sk.dtb
@@ -38,6 +39,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am62d2-evm.dtb
 
 # Boards with AM62Px SoC
 dtb-$(CONFIG_ARCH_K3) += k3-am62p5-sk.dtb
+dtb-$(CONFIG_ARCH_K3) += k3-am62p5-var-som-symphony.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am62p5-verdin-nonwifi-dahlia.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am62p5-verdin-nonwifi-dev.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am62p5-verdin-nonwifi-ivy.dtb
@@ -69,6 +71,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-rdk.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-gpio-fan.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-pcie-usb2.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-x27-gpio1-spi1-uart3.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-am642-phyboard-electra-peb-c-010.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-am642-sk.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am642-tqma64xxl-mbax4xxl.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo
@@ -131,6 +134,7 @@ dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-gesi-exp-board.dtbo
 k3-j721s2-evm-dtbs := k3-j721s2-common-proc-board.dtb k3-j721s2-evm-gesi-exp-board.dtbo
 dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm.dtb
 dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-pcie1-ep.dtbo
+dtb-$(CONFIG_ARCH_K3) += k3-j721s2-evm-usb0-type-a.dtbo
 
 # Boards with J722s SoC
 dtb-$(CONFIG_ARCH_K3) += k3-am67a-beagley-ai.dtb
@@ -206,6 +210,8 @@ k3-am642-phyboard-electra-pcie-usb2-dtbs := \
 	k3-am642-phyboard-electra-rdk.dtb k3-am642-phyboard-electra-pcie-usb2.dtbo
 k3-am642-phyboard-electra-x27-gpio1-spi1-uart3-dtbs := \
 	k3-am642-phyboard-electra-rdk.dtb k3-am642-phyboard-electra-x27-gpio1-spi1-uart3.dtbo
+k3-am642-phyboard-electra-peb-c-010-dtbs := \
+	k3-am642-phyboard-electra-rdk.dtb k3-am642-phyboard-electra-peb-c-010.dtbo
 k3-am642-tqma64xxl-mbax4xxl-sdcard-dtbs := \
 	k3-am642-tqma64xxl-mbax4xxl.dtb k3-am64-tqma64xxl-mbax4xxl-sdcard.dtbo
 k3-am642-tqma64xxl-mbax4xxl-wlan-dtbs := \
@@ -230,6 +236,8 @@ k3-j721e-sk-csi2-dual-imx219-dtbs := k3-j721e-sk.dtb \
 	k3-j721e-sk-csi2-dual-imx219.dtbo
 k3-j721s2-evm-pcie1-ep-dtbs := k3-j721s2-common-proc-board.dtb \
 	k3-j721s2-evm-pcie1-ep.dtbo
+k3-j721s2-evm-usb0-type-a-dtbs := k3-j721s2-common-proc-board.dtb \
+	k3-j721s2-evm-usb0-type-a.dtbo
 k3-j722s-evm-csi2-quad-rpi-cam-imx219-dtbs := k3-j722s-evm.dtb \
 	k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtbo
 k3-j722s-evm-csi2-quad-tevi-ov5640-dtbs := k3-j722s-evm.dtb \
@@ -272,6 +280,7 @@ dtb- += k3-am625-beagleplay-csi2-ov5640.dtb \
 	k3-j721e-evm-pcie1-ep.dtb \
 	k3-j721e-sk-csi2-dual-imx219.dtb \
 	k3-j721s2-evm-pcie1-ep.dtb \
+	k3-j721s2-evm-usb0-type-a.dtb \
 	k3-j722s-evm-csi2-quad-rpi-cam-imx219.dtb \
 	k3-j722s-evm-csi2-quad-tevi-ov5640.dtb \
 	k3-j742s2-evm-usb0-type-a.dtb \
diff --git a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
index 4609f366006e..ecfba05fe5c2 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62-lp-sk.dts
@@ -7,12 +7,20 @@
 
 /dts-v1/;
 
+#include "k3-am625.dtsi"
 #include "k3-am62x-sk-common.dtsi"
 
 / {
 	compatible = "ti,am62-lp-sk", "ti,am625";
 	model = "Texas Instruments AM62x LP SK";
 
+	memory@80000000 {
+		/* 2G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+		device_type = "memory";
+		bootph-pre-ram;
+	};
+
 	vmain_pd: regulator-0 {
 		/* TPS65988 PD CONTROLLER OUTPUT */
 		compatible = "regulator-fixed";
diff --git a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
index 120ba8f9dd0e..40fb3c9e674c 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-main.dtsi
@@ -808,6 +808,7 @@
 		#mbox-cells = <1>;
 		ti,mbox-num-users = <4>;
 		ti,mbox-num-fifos = <16>;
+		status = "disabled";
 	};
 
 	ecap0: pwm@23100000 {
@@ -1031,6 +1032,9 @@
 		cdns_csi2rx0: csi-bridge@30101000 {
 			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
 			reg = <0x00 0x30101000 0x00 0x1000>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error_irq", "irq";
 			clocks = <&k3_clks 182 0>, <&k3_clks 182 3>, <&k3_clks 182 0>,
 				<&k3_clks 182 0>, <&k3_clks 182 4>, <&k3_clks 182 4>;
 			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
diff --git a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
index 10e6b5c08619..eeca643fedbe 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-phycore-som.dtsi
@@ -46,31 +46,19 @@
 			pmsg-size = <0x8000>;
 		};
 
-		rtos_ipc_memory_region: ipc-memories@9c800000 {
+		rtos_ipc_memory_region: memory@9c800000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0x9c800000 0x00 0x00300000>;
 			no-map;
 		};
 
-		mcu_m4fss_dma_memory_region: m4f-dma-memory@9cb00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x9cb00000 0x00 0x100000>;
-			no-map;
-		};
-
-		mcu_m4fss_memory_region: m4f-memory@9cc00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x9cc00000 0x00 0xe00000>;
-			no-map;
-		};
-
-		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9da00000 {
+		wkup_r5fss0_core0_dma_memory_region: memory@9da00000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0x9da00000 0x00 0x100000>;
 			no-map;
 		};
 
-		wkup_r5fss0_core0_memory_region: r5f-memory@9db00000 {
+		wkup_r5fss0_core0_memory_region: memory@9db00000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0x9db00000 0x00 0xc00000>;
 			no-map;
@@ -245,20 +233,6 @@
 	};
 };
 
-&mailbox0_cluster0 {
-	status = "okay";
-
-	mbox_m4_0: mbox-m4-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_r5_0: mbox-r5-0 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
 &main_pktdma {
 	bootph-all;
 };
@@ -364,13 +338,6 @@
 	};
 };
 
-&mcu_m4fss {
-	mboxes = <&mailbox0_cluster0 &mbox_m4_0>;
-	memory-region = <&mcu_m4fss_dma_memory_region>,
-			<&mcu_m4fss_memory_region>;
-	status = "okay";
-};
-
 &ospi0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ospi0_pins_default>;
@@ -399,12 +366,4 @@
 	status = "okay";
 };
 
-&wkup_r5fss0 {
-	status = "okay";
-};
-
-&wkup_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
-	memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
-			<&wkup_r5fss0_core0_memory_region>;
-};
+#include "k3-am62-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am62-pocketbeagle2.dts b/arch/arm64/boot/dts/ti/k3-am62-pocketbeagle2.dts
index 2e4cf65ee323..7a4cffc27bda 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-pocketbeagle2.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62-pocketbeagle2.dts
@@ -54,18 +54,6 @@
 			linux,cma-default;
 		};
 
-		mcu_m4fss_dma_memory_region: m4f-dma-memory@9cb00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x9cb00000 0x00 0x100000>;
-			no-map;
-		};
-
-		mcu_m4fss_memory_region: m4f-memory@9cc00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x9cc00000 0x00 0xe00000>;
-			no-map;
-		};
-
 		secure_tfa_ddr: tfa@9e780000 {
 			reg = <0x00 0x9e780000 0x00 0x80000>;
 			alignment = <0x1000>;
@@ -78,7 +66,13 @@
 			no-map;
 		};
 
-		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 {
+		wkup_r5fss0_core0_dma_memory_region: memory@9da00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9da00000 0x00 0x100000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_memory_region: memory@9db00000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0x9db00000 0x00 0xc00000>;
 			no-map;
@@ -292,13 +286,6 @@
 	pinctrl-0 = <&epwm2_pins_default>;
 };
 
-&mailbox0_cluster0 {
-	mbox_m4_0: mbox-m4-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-};
-
 &main_uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
@@ -349,13 +336,6 @@
 	status = "okay";
 };
 
-&mcu_m4fss {
-	mboxes = <&mailbox0_cluster0 &mbox_m4_0>;
-	memory-region = <&mcu_m4fss_dma_memory_region>,
-			<&mcu_m4fss_memory_region>;
-	status = "okay";
-};
-
 &mcu_pmx0 {
 	wkup_uart0_pins_default: wkup-uart0-default-pins {
 		pinctrl-single,pins = <
@@ -519,3 +499,5 @@
 		};
 	};
 };
+
+#include "k3-am62-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am62-ti-ipc-firmware.dtsi b/arch/arm64/boot/dts/ti/k3-am62-ti-ipc-firmware.dtsi
new file mode 100644
index 000000000000..ea69fab9b52b
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62-ti-ipc-firmware.dtsi
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * Device Tree Source for enabling IPC using TI SDK firmware on AM62 SoCs
+ *
+ * Copyright (C) 2021-2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&reserved_memory {
+	mcu_m4fss_dma_memory_region: memory@9cb00000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0x9cb00000 0x00 0x100000>;
+		no-map;
+	};
+
+	mcu_m4fss_memory_region: memory@9cc00000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0x9cc00000 0x00 0xe00000>;
+		no-map;
+	};
+};
+
+&mailbox0_cluster0 {
+	status = "okay";
+
+	mbox_m4_0: mbox-m4-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_r5_0: mbox-r5-0 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mcu_m4fss {
+	mboxes = <&mailbox0_cluster0 &mbox_m4_0>;
+	memory-region = <&mcu_m4fss_dma_memory_region>,
+			<&mcu_m4fss_memory_region>;
+	status = "okay";
+};
+
+&wkup_r5fss0 {
+	status = "okay";
+};
+
+&wkup_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
+	memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
+			<&wkup_r5fss0_core0_memory_region>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi
index bc2289d74774..dc4b228a9fd7 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-verdin.dtsi
@@ -189,7 +189,7 @@
 		regulator-name = "USB_1_EN";
 	};
 
-	reserved-memory {
+	reserved_memory: reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -206,7 +206,13 @@
 			no-map;
 		};
 
-		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 {
+		wkup_r5fss0_core0_dma_memory_region: memory@9da00000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9da00000 0x00 0x100000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_memory_region: memory@9db00000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0x9db00000 0x00 0xc00000>;
 			no-map;
@@ -1316,13 +1322,6 @@
 	status = "disabled";
 };
 
-&mailbox0_cluster0 {
-	mbox_m4_0: mbox-m4-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-};
-
 /* Verdin CAN_1 */
 &main_mcan0 {
 	pinctrl-names = "default";
@@ -1506,3 +1505,5 @@
 	pinctrl-0 = <&pinctrl_wkup_uart0>;
 	status = "disabled";
 };
+
+#include "k3-am62-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
index 6549b7efa656..75aed3a88284 100644
--- a/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62-wakeup.dtsi
@@ -128,6 +128,7 @@
 			ti,sci = <&dmsc>;
 			ti,sci-dev-id = <121>;
 			ti,sci-proc-ids = <0x01 0xff>;
+			status = "disabled";
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
index 72b09f9c69d8..7028d9835c4a 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-beagleplay.dts
@@ -83,7 +83,7 @@
 			no-map;
 		};
 
-		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9db00000 {
+		wkup_r5fss0_core0_dma_memory_region: memory@9db00000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0x9db00000 0x00 0xc00000>;
 			no-map;
diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am625-sk-common.dtsi
new file mode 100644
index 000000000000..fe0b98e1d105
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am625-sk-common.dtsi
@@ -0,0 +1,296 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Common dtsi for AM625 SK and derivatives
+ *
+ * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "k3-am62x-sk-common.dtsi"
+
+/ {
+	opp-table {
+		/* Add 1.4GHz OPP for am625-sk board. Requires VDD_CORE to be at 0.85V */
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-supported-hw = <0x01 0x0004>;
+			clock-latency-ns = <6000000>;
+		};
+	};
+
+	vmain_pd: regulator-0 {
+		/* TPS65988 PD CONTROLLER OUTPUT */
+		compatible = "regulator-fixed";
+		regulator-name = "vmain_pd";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		bootph-all;
+	};
+
+	vcc_5v0: regulator-1 {
+		/* Output of LM34936 */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_5v0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vmain_pd>;
+		regulator-always-on;
+		regulator-boot-on;
+		bootph-all;
+	};
+
+	vcc_3v3_sys: regulator-2 {
+		/* output of LM61460-Q1 */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_3v3_sys";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		vin-supply = <&vmain_pd>;
+		regulator-always-on;
+		regulator-boot-on;
+		bootph-all;
+	};
+
+	vdd_mmc1: regulator-3 {
+		/* TPS22918DBVR */
+		compatible = "regulator-fixed";
+		regulator-name = "vdd_mmc1";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		vin-supply = <&vcc_3v3_sys>;
+		gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
+		bootph-all;
+	};
+
+	vdd_sd_dv: regulator-4 {
+		/* Output of TLV71033 */
+		compatible = "regulator-gpio";
+		regulator-name = "tlv71033";
+		pinctrl-names = "default";
+		pinctrl-0 = <&vdd_sd_dv_pins_default>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		vin-supply = <&vcc_5v0>;
+		gpios = <&main_gpio0 31 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+		bootph-all;
+	};
+
+	vcc_1v8: regulator-5 {
+		/* output of TPS6282518DMQ */
+		compatible = "regulator-fixed";
+		regulator-name = "vcc_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&vcc_3v3_sys>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+};
+
+&main_pmx0 {
+	main_mmc0_pins_default: main-mmc0-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */
+			AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
+			AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */
+			AM62X_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AA1) MMC0_DAT1 */
+			AM62X_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (AA3) MMC0_DAT2 */
+			AM62X_IOPAD(0x208, PIN_INPUT_PULLUP, 0) /* (Y4) MMC0_DAT3 */
+			AM62X_IOPAD(0x204, PIN_INPUT_PULLUP, 0) /* (AB2) MMC0_DAT4 */
+			AM62X_IOPAD(0x200, PIN_INPUT_PULLUP, 0) /* (AC1) MMC0_DAT5 */
+			AM62X_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (AD2) MMC0_DAT6 */
+			AM62X_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AC2) MMC0_DAT7 */
+		>;
+	};
+
+	main_rgmii2_pins_default: main-rgmii2-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x184, PIN_INPUT, 0) /* (AE23) RGMII2_RD0 */
+			AM62X_IOPAD(0x188, PIN_INPUT, 0) /* (AB20) RGMII2_RD1 */
+			AM62X_IOPAD(0x18c, PIN_INPUT, 0) /* (AC21) RGMII2_RD2 */
+			AM62X_IOPAD(0x190, PIN_INPUT, 0) /* (AE22) RGMII2_RD3 */
+			AM62X_IOPAD(0x180, PIN_INPUT, 0) /* (AD23) RGMII2_RXC */
+			AM62X_IOPAD(0x17c, PIN_INPUT, 0) /* (AD22) RGMII2_RX_CTL */
+			AM62X_IOPAD(0x16c, PIN_OUTPUT, 0) /* (Y18) RGMII2_TD0 */
+			AM62X_IOPAD(0x170, PIN_OUTPUT, 0) /* (AA18) RGMII2_TD1 */
+			AM62X_IOPAD(0x174, PIN_OUTPUT, 0) /* (AD21) RGMII2_TD2 */
+			AM62X_IOPAD(0x178, PIN_OUTPUT, 0) /* (AC20) RGMII2_TD3 */
+			AM62X_IOPAD(0x168, PIN_OUTPUT, 0) /* (AE21) RGMII2_TXC */
+			AM62X_IOPAD(0x164, PIN_OUTPUT, 0) /* (AA19) RGMII2_TX_CTL */
+		>;
+	};
+
+	ospi0_pins_default: ospi0-default-pins {
+		bootph-all;
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x000, PIN_OUTPUT, 0) /* (H24) OSPI0_CLK */
+			AM62X_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F23) OSPI0_CSn0 */
+			AM62X_IOPAD(0x00c, PIN_INPUT, 0) /* (E25) OSPI0_D0 */
+			AM62X_IOPAD(0x010, PIN_INPUT, 0) /* (G24) OSPI0_D1 */
+			AM62X_IOPAD(0x014, PIN_INPUT, 0) /* (F25) OSPI0_D2 */
+			AM62X_IOPAD(0x018, PIN_INPUT, 0) /* (F24) OSPI0_D3 */
+			AM62X_IOPAD(0x01c, PIN_INPUT, 0) /* (J23) OSPI0_D4 */
+			AM62X_IOPAD(0x020, PIN_INPUT, 0) /* (J25) OSPI0_D5 */
+			AM62X_IOPAD(0x024, PIN_INPUT, 0) /* (H25) OSPI0_D6 */
+			AM62X_IOPAD(0x028, PIN_INPUT, 0) /* (J22) OSPI0_D7 */
+			AM62X_IOPAD(0x008, PIN_INPUT, 0) /* (J24) OSPI0_DQS */
+		>;
+	};
+
+	vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (P25) GPMC0_CLK.GPIO0_31 */
+		>;
+		bootph-all;
+	};
+
+	main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins {
+		pinctrl-single,pins = <
+			AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */
+		>;
+		bootph-all;
+	};
+};
+
+&main_gpio0 {
+	bootph-all;
+};
+
+&main_gpio1 {
+	bootph-all;
+};
+
+&main_i2c1 {
+	exp1: gpio@22 {
+		compatible = "ti,tca6424";
+		reg = <0x22>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>;
+		interrupt-parent = <&main_gpio1>;
+		interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
+				   "PRU_DETECT", "MMC1_SD_EN",
+				   "VPP_LDO_EN", "EXP_PS_3V3_En",
+				   "EXP_PS_5V0_En", "EXP_HAT_DETECT",
+				   "GPIO_AUD_RSTn", "GPIO_eMMC_RSTn",
+				   "UART1_FET_BUF_EN", "WL_LT_EN",
+				   "GPIO_HDMI_RSTn", "CSI_GPIO1",
+				   "CSI_GPIO2", "PRU_3V3_EN",
+				   "HDMI_INTn", "PD_I2C_IRQ",
+				   "MCASP1_FET_EN", "MCASP1_BUF_BT_EN",
+				   "MCASP1_FET_SEL", "UART1_FET_SEL",
+				   "TSINT#", "IO_EXP_TEST_LED";
+		bootph-all;
+	};
+};
+
+&sdhci0 {
+	bootph-all;
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_mmc0_pins_default>;
+	disable-wp;
+};
+
+&sdhci1 {
+	vmmc-supply = <&vdd_mmc1>;
+	vqmmc-supply = <&vdd_sd_dv>;
+};
+
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_rgmii1_pins_default>, <&main_rgmii2_pins_default>;
+};
+
+&cpsw_port2 {
+	/* PCB provides an internal delay of 2ns */
+	phy-mode = "rgmii-rxid";
+	phy-handle = <&cpsw3g_phy1>;
+};
+
+&cpsw3g_mdio {
+	cpsw3g_phy1: ethernet-phy@1 {
+		reg = <1>;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		ti,min-output-impedance;
+	};
+};
+
+&fss {
+	bootph-all;
+};
+
+&ospi0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&ospi0_pins_default>;
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <25000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			bootph-all;
+
+			partition@0 {
+				label = "ospi.tiboot3";
+				reg = <0x0 0x80000>;
+			};
+
+			partition@80000 {
+				label = "ospi.tispl";
+				reg = <0x80000 0x200000>;
+			};
+
+			partition@280000 {
+				label = "ospi.u-boot";
+				reg = <0x280000 0x400000>;
+			};
+
+			partition@680000 {
+				label = "ospi.env";
+				reg = <0x680000 0x40000>;
+			};
+
+			partition@6c0000 {
+				label = "ospi.env.backup";
+				reg = <0x6c0000 0x40000>;
+			};
+
+			partition@800000 {
+				label = "ospi.rootfs";
+				reg = <0x800000 0x37c0000>;
+			};
+
+			partition@3fc0000 {
+				bootph-pre-ram;
+				label = "ospi.phypattern";
+				reg = <0x3fc0000 0x40000>;
+			};
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am625-sk.dts b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
index d240165bda9c..52954c77df80 100644
--- a/arch/arm64/boot/dts/ti/k3-am625-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am625-sk.dts
@@ -7,310 +7,17 @@
 
 /dts-v1/;
 
-#include "k3-am62x-sk-common.dtsi"
+#include "k3-am625.dtsi"
+#include "k3-am625-sk-common.dtsi"
 
 / {
 	compatible = "ti,am625-sk", "ti,am625";
 	model = "Texas Instruments AM625 SK";
 
-	opp-table {
-		/* Add 1.4GHz OPP for am625-sk board. Requires VDD_CORE to be at 0.85V */
-		opp-1400000000 {
-			opp-hz = /bits/ 64 <1400000000>;
-			opp-supported-hw = <0x01 0x0004>;
-			clock-latency-ns = <6000000>;
-		};
-	};
-
 	memory@80000000 {
-		device_type = "memory";
 		/* 2G RAM */
 		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
-
-	};
-
-	vmain_pd: regulator-0 {
-		/* TPS65988 PD CONTROLLER OUTPUT */
-		bootph-all;
-		compatible = "regulator-fixed";
-		regulator-name = "vmain_pd";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vcc_5v0: regulator-1 {
-		/* Output of LM34936 */
-		bootph-all;
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_5v0";
-		regulator-min-microvolt = <5000000>;
-		regulator-max-microvolt = <5000000>;
-		vin-supply = <&vmain_pd>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vcc_3v3_sys: regulator-2 {
-		/* output of LM61460-Q1 */
-		bootph-all;
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_3v3_sys";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		vin-supply = <&vmain_pd>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-
-	vdd_mmc1: regulator-3 {
-		/* TPS22918DBVR */
-		bootph-all;
-		compatible = "regulator-fixed";
-		regulator-name = "vdd_mmc1";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		enable-active-high;
-		vin-supply = <&vcc_3v3_sys>;
-		gpio = <&exp1 3 GPIO_ACTIVE_HIGH>;
-	};
-
-	vdd_sd_dv: regulator-4 {
-		/* Output of TLV71033 */
-		bootph-all;
-		compatible = "regulator-gpio";
-		regulator-name = "tlv71033";
-		pinctrl-names = "default";
-		pinctrl-0 = <&vdd_sd_dv_pins_default>;
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-boot-on;
-		vin-supply = <&vcc_5v0>;
-		gpios = <&main_gpio0 31 GPIO_ACTIVE_HIGH>;
-		states = <1800000 0x0>,
-			 <3300000 0x1>;
-	};
-
-	vcc_1v8: regulator-5 {
-		/* output of TPS6282518DMQ */
-		compatible = "regulator-fixed";
-		regulator-name = "vcc_1v8";
-		regulator-min-microvolt = <1800000>;
-		regulator-max-microvolt = <1800000>;
-		vin-supply = <&vcc_3v3_sys>;
-		regulator-always-on;
-		regulator-boot-on;
-	};
-};
-
-&main_pmx0 {
-	main_mmc0_pins_default: main-mmc0-default-pins {
-		bootph-all;
-		pinctrl-single,pins = <
-			AM62X_IOPAD(0x220, PIN_INPUT, 0) /* (Y3) MMC0_CMD */
-			AM62X_IOPAD(0x218, PIN_INPUT, 0) /* (AB1) MMC0_CLK */
-			AM62X_IOPAD(0x214, PIN_INPUT, 0) /* (AA2) MMC0_DAT0 */
-			AM62X_IOPAD(0x210, PIN_INPUT_PULLUP, 0) /* (AA1) MMC0_DAT1 */
-			AM62X_IOPAD(0x20c, PIN_INPUT_PULLUP, 0) /* (AA3) MMC0_DAT2 */
-			AM62X_IOPAD(0x208, PIN_INPUT_PULLUP, 0) /* (Y4) MMC0_DAT3 */
-			AM62X_IOPAD(0x204, PIN_INPUT_PULLUP, 0) /* (AB2) MMC0_DAT4 */
-			AM62X_IOPAD(0x200, PIN_INPUT_PULLUP, 0) /* (AC1) MMC0_DAT5 */
-			AM62X_IOPAD(0x1fc, PIN_INPUT_PULLUP, 0) /* (AD2) MMC0_DAT6 */
-			AM62X_IOPAD(0x1f8, PIN_INPUT_PULLUP, 0) /* (AC2) MMC0_DAT7 */
-		>;
-	};
-
-	main_rgmii2_pins_default: main-rgmii2-default-pins {
-		bootph-all;
-		pinctrl-single,pins = <
-			AM62X_IOPAD(0x184, PIN_INPUT, 0) /* (AE23) RGMII2_RD0 */
-			AM62X_IOPAD(0x188, PIN_INPUT, 0) /* (AB20) RGMII2_RD1 */
-			AM62X_IOPAD(0x18c, PIN_INPUT, 0) /* (AC21) RGMII2_RD2 */
-			AM62X_IOPAD(0x190, PIN_INPUT, 0) /* (AE22) RGMII2_RD3 */
-			AM62X_IOPAD(0x180, PIN_INPUT, 0) /* (AD23) RGMII2_RXC */
-			AM62X_IOPAD(0x17c, PIN_INPUT, 0) /* (AD22) RGMII2_RX_CTL */
-			AM62X_IOPAD(0x16c, PIN_OUTPUT, 0) /* (Y18) RGMII2_TD0 */
-			AM62X_IOPAD(0x170, PIN_OUTPUT, 0) /* (AA18) RGMII2_TD1 */
-			AM62X_IOPAD(0x174, PIN_OUTPUT, 0) /* (AD21) RGMII2_TD2 */
-			AM62X_IOPAD(0x178, PIN_OUTPUT, 0) /* (AC20) RGMII2_TD3 */
-			AM62X_IOPAD(0x168, PIN_OUTPUT, 0) /* (AE21) RGMII2_TXC */
-			AM62X_IOPAD(0x164, PIN_OUTPUT, 0) /* (AA19) RGMII2_TX_CTL */
-		>;
-	};
-
-	ospi0_pins_default: ospi0-default-pins {
-		bootph-all;
-		pinctrl-single,pins = <
-			AM62X_IOPAD(0x000, PIN_OUTPUT, 0) /* (H24) OSPI0_CLK */
-			AM62X_IOPAD(0x02c, PIN_OUTPUT, 0) /* (F23) OSPI0_CSn0 */
-			AM62X_IOPAD(0x00c, PIN_INPUT, 0) /* (E25) OSPI0_D0 */
-			AM62X_IOPAD(0x010, PIN_INPUT, 0) /* (G24) OSPI0_D1 */
-			AM62X_IOPAD(0x014, PIN_INPUT, 0) /* (F25) OSPI0_D2 */
-			AM62X_IOPAD(0x018, PIN_INPUT, 0) /* (F24) OSPI0_D3 */
-			AM62X_IOPAD(0x01c, PIN_INPUT, 0) /* (J23) OSPI0_D4 */
-			AM62X_IOPAD(0x020, PIN_INPUT, 0) /* (J25) OSPI0_D5 */
-			AM62X_IOPAD(0x024, PIN_INPUT, 0) /* (H25) OSPI0_D6 */
-			AM62X_IOPAD(0x028, PIN_INPUT, 0) /* (J22) OSPI0_D7 */
-			AM62X_IOPAD(0x008, PIN_INPUT, 0) /* (J24) OSPI0_DQS */
-		>;
-	};
-
-	vdd_sd_dv_pins_default: vdd-sd-dv-default-pins {
-		bootph-all;
-		pinctrl-single,pins = <
-			AM62X_IOPAD(0x07c, PIN_OUTPUT, 7) /* (P25) GPMC0_CLK.GPIO0_31 */
-		>;
-	};
-
-	main_gpio1_ioexp_intr_pins_default: main-gpio1-ioexp-intr-default-pins {
-		bootph-all;
-		pinctrl-single,pins = <
-			AM62X_IOPAD(0x01d4, PIN_INPUT, 7) /* (B15) UART0_RTSn.GPIO1_23 */
-		>;
-	};
-};
-
-&main_gpio0 {
-	bootph-all;
-};
-
-&main_gpio1 {
-	bootph-all;
-};
-
-&main_i2c1 {
-	bootph-all;
-	exp1: gpio@22 {
-		bootph-all;
-		compatible = "ti,tca6424";
-		reg = <0x22>;
-		gpio-controller;
-		#gpio-cells = <2>;
-		gpio-line-names = "GPIO_CPSW2_RST", "GPIO_CPSW1_RST",
-				   "PRU_DETECT", "MMC1_SD_EN",
-				   "VPP_LDO_EN", "EXP_PS_3V3_En",
-				   "EXP_PS_5V0_En", "EXP_HAT_DETECT",
-				   "GPIO_AUD_RSTn", "GPIO_eMMC_RSTn",
-				   "UART1_FET_BUF_EN", "WL_LT_EN",
-				   "GPIO_HDMI_RSTn", "CSI_GPIO1",
-				   "CSI_GPIO2", "PRU_3V3_EN",
-				   "HDMI_INTn", "PD_I2C_IRQ",
-				   "MCASP1_FET_EN", "MCASP1_BUF_BT_EN",
-				   "MCASP1_FET_SEL", "UART1_FET_SEL",
-				   "TSINT#", "IO_EXP_TEST_LED";
-
-		interrupt-parent = <&main_gpio1>;
-		interrupts = <23 IRQ_TYPE_EDGE_FALLING>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		pinctrl-names = "default";
-		pinctrl-0 = <&main_gpio1_ioexp_intr_pins_default>;
-	};
-};
-
-&sdhci0 {
-	bootph-all;
-	non-removable;
-	pinctrl-names = "default";
-	pinctrl-0 = <&main_mmc0_pins_default>;
-	status = "okay";
-};
-
-&sdhci1 {
-	vmmc-supply = <&vdd_mmc1>;
-	vqmmc-supply = <&vdd_sd_dv>;
-};
-
-&cpsw3g {
-	pinctrl-names = "default";
-	pinctrl-0 = <&main_rgmii1_pins_default>, <&main_rgmii2_pins_default>;
-};
-
-&cpsw_port2 {
-	phy-mode = "rgmii-rxid";
-	phy-handle = <&cpsw3g_phy1>;
-};
-
-&cpsw3g_mdio {
-	cpsw3g_phy1: ethernet-phy@1 {
-		reg = <1>;
-		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
-		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
-		ti,min-output-impedance;
-	};
-};
-
-&fss {
-	bootph-all;
-};
-
-&ospi0 {
-	bootph-all;
-	status = "okay";
-	pinctrl-names = "default";
-	pinctrl-0 = <&ospi0_pins_default>;
-
-	flash@0 {
-		bootph-all;
-		compatible = "jedec,spi-nor";
-		reg = <0x0>;
-		spi-tx-bus-width = <8>;
-		spi-rx-bus-width = <8>;
-		spi-max-frequency = <25000000>;
-		cdns,tshsl-ns = <60>;
-		cdns,tsd2d-ns = <60>;
-		cdns,tchsh-ns = <60>;
-		cdns,tslch-ns = <60>;
-		cdns,read-delay = <4>;
-
-		partitions {
-			bootph-all;
-			compatible = "fixed-partitions";
-			#address-cells = <1>;
-			#size-cells = <1>;
-
-			partition@0 {
-				label = "ospi.tiboot3";
-				reg = <0x0 0x80000>;
-			};
-
-			partition@80000 {
-				label = "ospi.tispl";
-				reg = <0x80000 0x200000>;
-			};
-
-			partition@280000 {
-				label = "ospi.u-boot";
-				reg = <0x280000 0x400000>;
-			};
-
-			partition@680000 {
-				label = "ospi.env";
-				reg = <0x680000 0x40000>;
-			};
-
-			partition@6c0000 {
-				label = "ospi.env.backup";
-				reg = <0x6c0000 0x40000>;
-			};
-
-			partition@800000 {
-				label = "ospi.rootfs";
-				reg = <0x800000 0x37c0000>;
-			};
-
-			partition@3fc0000 {
-				bootph-pre-ram;
-				label = "ospi.phypattern";
-				reg = <0x3fc0000 0x40000>;
-			};
-		};
+		device_type = "memory";
+		bootph-pre-ram;
 	};
 };
-
-&tlv320aic3106 {
-	DVDD-supply = <&vcc_1v8>;
-};
diff --git a/arch/arm64/boot/dts/ti/k3-am6254atl-sk.dts b/arch/arm64/boot/dts/ti/k3-am6254atl-sk.dts
new file mode 100644
index 000000000000..055e63a3fbb1
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am6254atl-sk.dts
@@ -0,0 +1,15 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * AM6254atl SiP SK: https://www.ti.com/lit/df/sprr482b/sprr482b.zip
+ * Webpage: https://www.ti.com/tool/SK-AM62-SIP
+ *
+ * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "k3-am6254atl.dtsi"
+#include "k3-am625-sk-common.dtsi"
+
+/ {
+	model = "Texas Instruments AM6254atl SK";
+	compatible = "ti,am6254atl-sk", "ti,am6254atl", "ti,am625";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am6254atl.dtsi b/arch/arm64/boot/dts/ti/k3-am6254atl.dtsi
new file mode 100644
index 000000000000..976ad7dc1e71
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am6254atl.dtsi
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * DTS for AM625 SiP SoC family in Quad core configuration and 512MiB RAM.
+ *
+ * Webpage: https://www.ti.com/product/AM625SIP
+ *
+ * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include "k3-am625.dtsi"
+
+/ {
+	model = "Texas Instruments AM6254atl SiP";
+	compatible = "ti,am6254atl", "ti,am625";
+
+	memory@80000000 {
+		/* 512MiB of integrated RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x20000000>;
+		device_type = "memory";
+		bootph-all;
+	};
+
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
index 44e7e459f176..829f00adea6e 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-main.dtsi
@@ -267,7 +267,7 @@
 
 	main_pmx0: pinctrl@f4000 {
 		compatible = "pinctrl-single";
-		reg = <0x00 0xf4000 0x00 0x2ac>;
+		reg = <0x00 0xf4000 0x00 0x25c>;
 		#pinctrl-cells = <1>;
 		pinctrl-single,register-width = <32>;
 		pinctrl-single,function-mask = <0xffffffff>;
@@ -804,6 +804,7 @@
 		#mbox-cells = <1>;
 		ti,mbox-num-users = <4>;
 		ti,mbox-num-fifos = <16>;
+		status = "disabled";
 	};
 
 	mailbox0_cluster1: mailbox@29010000 {
@@ -813,6 +814,7 @@
 		#mbox-cells = <1>;
 		ti,mbox-num-users = <4>;
 		ti,mbox-num-fifos = <16>;
+		status = "disabled";
 	};
 
 	mailbox0_cluster2: mailbox@29020000 {
@@ -822,6 +824,7 @@
 		#mbox-cells = <1>;
 		ti,mbox-num-users = <4>;
 		ti,mbox-num-fifos = <16>;
+		status = "disabled";
 	};
 
 	mailbox0_cluster3: mailbox@29030000 {
@@ -831,6 +834,7 @@
 		#mbox-cells = <1>;
 		ti,mbox-num-users = <4>;
 		ti,mbox-num-fifos = <16>;
+		status = "disabled";
 	};
 
 	main_mcan0: can@20701000 {
@@ -1054,6 +1058,9 @@
 		cdns_csi2rx0: csi-bridge@30101000 {
 			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
 			reg = <0x00 0x30101000 0x00 0x1000>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error_irq", "irq";
 			clocks = <&k3_clks 182 0>, <&k3_clks 182 3>, <&k3_clks 182 0>,
 				<&k3_clks 182 0>, <&k3_clks 182 4>, <&k3_clks 182 4>;
 			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi
index ee961ced7208..d22caa7c346b 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-mcu.dtsi
@@ -197,6 +197,7 @@
 			ti,sci = <&dmsc>;
 			ti,sci-dev-id = <9>;
 			ti,sci-proc-ids = <0x03 0xff>;
+			status = "disabled";
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
index 5dc5d2cb20cc..b3d012a5a26a 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-phycore-som.dtsi
@@ -45,7 +45,7 @@
 		bootph-all;
 	};
 
-	reserved-memory {
+	reserved_memory: reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -59,37 +59,13 @@
 			linux,cma-default;
 		};
 
-		c7x_0_dma_memory_region: c7x-dma-memory@99800000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x99800000 0x00 0x100000>;
-			no-map;
-		};
-
-		c7x_0_memory_region: c7x-memory@99900000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x99900000 0x00 0xf00000>;
-			no-map;
-		};
-
-		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@9b800000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x9b800000 0x00 0x100000>;
-			no-map;
-		};
-
-		mcu_r5fss0_core0_memory_region: r5f-dma-memory@9b900000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x9b900000 0x00 0xf00000>;
-			no-map;
-		};
-
-		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9c800000 {
+		wkup_r5fss0_core0_dma_memory_region: memory@9c800000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0x9c800000 0x00 0x100000>;
 			no-map;
 		};
 
-		wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
+		wkup_r5fss0_core0_memory_region: memory@9c900000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0x9c900000 0x00 0xf00000>;
 			no-map;
@@ -200,11 +176,13 @@
 	};
 };
 
-&c7x_0 {
-	mboxes = <&mailbox0_cluster1 &mbox_c7x_0>;
-	memory-region = <&c7x_0_dma_memory_region>,
-			<&c7x_0_memory_region>;
-	status = "okay";
+&a53_opp_table {
+	/* Requires VDD_CORE at 0v85 */
+	opp-1400000000 {
+		opp-hz = /bits/ 64 <1400000000>;
+		opp-supported-hw = <0x01 0x0004>;
+		clock-latency-ns = <6000000>;
+	};
 };
 
 &cpsw3g {
@@ -237,33 +215,6 @@
 	status = "okay";
 };
 
-&mailbox0_cluster0 {
-	status = "okay";
-
-	mbox_r5_0: mbox-r5-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-};
-
-&mailbox0_cluster1 {
-	status = "okay";
-
-	mbox_c7x_0: mbox-c7x-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-};
-
-&mailbox0_cluster2 {
-	status = "okay";
-
-	mbox_mcu_r5_0: mbox-mcu-r5-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-};
-
 &main_i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_pins_default>;
@@ -379,26 +330,6 @@
 	bootph-all;
 };
 
-/* main_rti4 is used by C7x DSP */
-&main_rti4 {
-	status = "reserved";
-};
-
-/* main_timer2 is used by C7x DSP */
-&main_timer2 {
-	status = "reserved";
-};
-
-&mcu_r5fss0 {
-	status = "okay";
-};
-
-&mcu_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster2 &mbox_mcu_r5_0>;
-	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
-			<&mcu_r5fss0_core0_memory_region>;
-};
-
 &ospi0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ospi0_pins_default>;
@@ -427,12 +358,4 @@
 	status = "okay";
 };
 
-&wkup_r5fss0 {
-	status = "okay";
-};
-
-&wkup_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster0  &mbox_r5_0>;
-	memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
-			<&wkup_r5fss0_core0_memory_region>;
-};
+#include "k3-am62a-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-ti-ipc-firmware.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-ti-ipc-firmware.dtsi
new file mode 100644
index 000000000000..950f4f37d477
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62a-ti-ipc-firmware.dtsi
@@ -0,0 +1,98 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * Device Tree Source for enabling IPC using TI SDK firmware on AM62A SoCs
+ *
+ * Copyright (C) 2022-2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&reserved_memory {
+	c7x_0_dma_memory_region: memory@99800000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0x99800000 0x00 0x100000>;
+		no-map;
+	};
+
+	c7x_0_memory_region: memory@99900000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0x99900000 0x00 0xf00000>;
+		no-map;
+	};
+
+	mcu_r5fss0_core0_dma_memory_region: memory@9b800000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0x9b800000 0x00 0x100000>;
+		no-map;
+	};
+
+	mcu_r5fss0_core0_memory_region: memory@9b900000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0x9b900000 0x00 0xf00000>;
+		no-map;
+	};
+};
+
+&mailbox0_cluster0 {
+	status = "okay";
+
+	mbox_r5_0: mbox-r5-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+
+	mbox_c7x_0: mbox-c7x-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mailbox0_cluster2 {
+	status = "okay";
+
+	mbox_mcu_r5_0: mbox-mcu-r5-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&wkup_r5fss0 {
+	status = "okay";
+};
+
+&wkup_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0>, <&mbox_r5_0>;
+	memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
+			<&wkup_r5fss0_core0_memory_region>;
+	status = "okay";
+};
+
+&mcu_r5fss0 {
+	status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster2>, <&mbox_mcu_r5_0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+	status = "okay";
+};
+
+&c7x_0 {
+	mboxes = <&mailbox0_cluster1>, <&mbox_c7x_0>;
+	memory-region = <&c7x_0_dma_memory_region>,
+			<&c7x_0_memory_region>;
+	status = "okay";
+};
+
+/* main_rti4 is used by C7x DSP */
+&main_rti4 {
+	status = "reserved";
+};
+
+/* main_timer2 is used by C7x DSP */
+&main_timer2 {
+	status = "reserved";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
index 9ef1c829a9df..23877dadc98d 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62a-wakeup.dtsi
@@ -127,6 +127,7 @@
 			ti,sci = <&dmsc>;
 			ti,sci-dev-id = <121>;
 			ti,sci-proc-ids = <0x01 0xff>;
+			status = "disabled";
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
index bceead5e288e..af591fe6ae4f 100644
--- a/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62a7-sk.dts
@@ -39,7 +39,7 @@
 		bootph-all;
 	};
 
-	reserved-memory {
+	reserved_memory: reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -53,37 +53,13 @@
 			linux,cma-default;
 		};
 
-		c7x_0_dma_memory_region: c7x-dma-memory@99800000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x99800000 0x00 0x100000>;
-			no-map;
-		};
-
-		c7x_0_memory_region: c7x-memory@99900000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x99900000 0x00 0xf00000>;
-			no-map;
-		};
-
-		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@9b800000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x9b800000 0x00 0x100000>;
-			no-map;
-		};
-
-		mcu_r5fss0_core0_memory_region: r5f-dma-memory@9b900000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x9b900000 0x00 0xf00000>;
-			no-map;
-		};
-
-		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9c800000 {
+		wkup_r5fss0_core0_dma_memory_region: memory@9c800000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0x9c800000 0x00 0x100000>;
 			no-map;
 		};
 
-		wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
+		wkup_r5fss0_core0_memory_region: memory@9c900000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0x9c900000 0x00 0xf00000>;
 			no-map;
@@ -713,11 +689,6 @@
 	status = "reserved";
 };
 
-/* main_timer2 is used by C7x DSP */
-&main_timer2 {
-	status = "reserved";
-};
-
 &usbss0 {
 	status = "okay";
 	ti,vbus-divider;
@@ -734,6 +705,10 @@
 	};
 };
 
+&usb0_phy_ctrl {
+	bootph-all;
+};
+
 &usbss1 {
 	status = "okay";
 };
@@ -835,65 +810,6 @@
 	status = "okay";
 };
 
-&mailbox0_cluster0 {
-	status = "okay";
-
-	mbox_r5_0: mbox-r5-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-};
-
-&mailbox0_cluster1 {
-	status = "okay";
-
-	mbox_c7x_0: mbox-c7x-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-};
-
-&mailbox0_cluster2 {
-	status = "okay";
-
-	mbox_mcu_r5_0: mbox-mcu-r5-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-};
-
-&wkup_r5fss0 {
-	status = "okay";
-};
-
-&wkup_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster0>, <&mbox_r5_0>;
-	memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
-			<&wkup_r5fss0_core0_memory_region>;
-};
-
-&mcu_r5fss0 {
-	status = "okay";
-};
-
-&mcu_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster2>, <&mbox_mcu_r5_0>;
-	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
-			<&mcu_r5fss0_core0_memory_region>;
-};
-
-&c7x_0 {
-	mboxes = <&mailbox0_cluster1>, <&mbox_c7x_0>;
-	memory-region = <&c7x_0_dma_memory_region>,
-			<&c7x_0_memory_region>;
-	status = "okay";
-};
-
-/* main_rti4 is used by C7x DSP */
-&main_rti4 {
-	status = "reserved";
-};
-
 &fss {
 	status = "okay";
 };
@@ -935,3 +851,5 @@
 		>;
 	};
 };
+
+#include "k3-am62a-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am62d2-evm.dts b/arch/arm64/boot/dts/ti/k3-am62d2-evm.dts
index daea18b0bc61..83af889e790a 100644
--- a/arch/arm64/boot/dts/ti/k3-am62d2-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62d2-evm.dts
@@ -25,6 +25,7 @@
 		rtc0 = &wkup_rtc0;
 		ethernet0 = &cpsw_port1;
 		ethernet1 = &cpsw_port2;
+		spi0 = &ospi0;
 	};
 
 	chosen {
@@ -39,7 +40,7 @@
 		bootph-all;
 	};
 
-	reserved-memory {
+	reserved_memory: reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -58,37 +59,13 @@
 			no-map;
 		};
 
-		c7x_0_dma_memory_region: c7x-dma-memory@99800000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x99800000 0x00 0x100000>;
-			no-map;
-		};
-
-		c7x_0_memory_region: c7x-memory@99900000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x99900000 0x00 0xf00000>;
-			no-map;
-		};
-
-		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@9b800000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x9b800000 0x00 0x100000>;
-			no-map;
-		};
-
-		mcu_r5fss0_core0_memory_region: r5f-dma-memory@9b900000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x9b900000 0x00 0xf00000>;
-			no-map;
-		};
-
-		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9c800000 {
+		wkup_r5fss0_core0_dma_memory_region: memory@9c800000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0x9c800000 0x00 0x100000>;
 			no-map;
 		};
 
-		wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
+		wkup_r5fss0_core0_memory_region: memory@9c900000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0x9c900000 0x00 0xf00000>;
 			no-map;
@@ -100,7 +77,7 @@
 			no-map;
 		};
 
-		rtos_ipc_memory_region: ipc-memories@a0000000 {
+		rtos_ipc_memory_region: memory@a0000000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0000000 0x00 0x01000000>;
 			no-map;
@@ -367,6 +344,32 @@
 			AM62DX_IOPAD(0x0244, PIN_INPUT, 7) /* (D18) MMC1_SDWP.GPIO1_49 */
 		>;
 	};
+
+	main_usb1_pins_default: main-usb1-default-pins {
+		pinctrl-single,pins = <
+			AM62DX_IOPAD(0x0258, PIN_OUTPUT, 0) /* (D19) USB1_DRVVBUS */
+		>;
+	};
+
+	ospi0_pins_default: ospi0-default-pins {
+		pinctrl-single,pins = <
+			AM62DX_IOPAD(0x0000, PIN_OUTPUT, 0) /* (L22) OSPI0_CLK */
+			AM62DX_IOPAD(0x002c, PIN_OUTPUT, 0) /* (H21) OSPI0_CSn0 */
+			AM62DX_IOPAD(0x0030, PIN_OUTPUT, 0) /* (G19) OSPI0_CSn1 */
+			AM62DX_IOPAD(0x0034, PIN_OUTPUT, 0) /* (K20) OSPI0_CSn2 */
+			AM62DX_IOPAD(0x0038, PIN_OUTPUT, 0) /* (G20) OSPI0_CSn3 */
+			AM62DX_IOPAD(0x000c, PIN_INPUT, 0) /* (J21) OSPI0_D0 */
+			AM62DX_IOPAD(0x0010, PIN_INPUT, 0) /* (J18) OSPI0_D1 */
+			AM62DX_IOPAD(0x0014, PIN_INPUT, 0) /* (J19) OSPI0_D2 */
+			AM62DX_IOPAD(0x0018, PIN_INPUT, 0) /* (H18) OSPI0_D3 */
+			AM62DX_IOPAD(0x001c, PIN_INPUT, 0) /* (K21) OSPI0_D4 */
+			AM62DX_IOPAD(0x0020, PIN_INPUT, 0) /* (H19) OSPI0_D5 */
+			AM62DX_IOPAD(0x0024, PIN_INPUT, 0) /* (J20) OSPI0_D6 */
+			AM62DX_IOPAD(0x0028, PIN_INPUT, 0) /* (J22) OSPI0_D7 */
+			AM62DX_IOPAD(0x0008, PIN_INPUT, 0) /* (L21) OSPI0_DQS */
+		>;
+		bootph-all;
+	};
 };
 
 &mcu_gpio0 {
@@ -499,6 +502,11 @@
 	status = "okay";
 };
 
+&usbss0 {
+	status = "okay";
+	ti,vbus-divider;
+};
+
 &usb0 {
 	usb-role-switch;
 
@@ -509,6 +517,16 @@
 	};
 };
 
+&usbss1 {
+	status = "okay";
+};
+
+&usb1 {
+	dr_mode = "host";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_usb1_pins_default>;
+};
+
 &cpsw3g {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_rgmii1_pins_default>,
@@ -551,65 +569,81 @@
 	};
 };
 
-&mailbox0_cluster0 {
+&fss {
 	status = "okay";
-
-	mbox_r5_0: mbox-r5-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
 };
 
-&mailbox0_cluster1 {
+&ospi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&ospi0_pins_default>;
 	status = "okay";
 
-	mbox_c7x_0: mbox-c7x-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-};
+	flash@0{
+		compatible = "jedec,spi-nor";
+		reg = <0x0>;
+		spi-tx-bus-width = <8>;
+		spi-rx-bus-width = <8>;
+		spi-max-frequency = <25000000>;
+		cdns,tshsl-ns = <60>;
+		cdns,tsd2d-ns = <60>;
+		cdns,tchsh-ns = <60>;
+		cdns,tslch-ns = <60>;
+		cdns,read-delay = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			partition@0 {
+				label = "ospi.tiboot3";
+				reg = <0x0 0x80000>;
+			};
 
-&mailbox0_cluster2 {
-	status = "okay";
+			partition@80000 {
+				label = "ospi.tispl";
+				reg = <0x80000 0x200000>;
+			};
 
-	mbox_mcu_r5_0: mbox-mcu-r5-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-};
+			partition@280000 {
+				label = "ospi.u-boot";
+				reg = <0x280000 0x400000>;
+			};
 
-&wkup_r5fss0 {
-	status = "okay";
+			partition@680000 {
+				label = "ospi.env";
+				reg = <0x680000 0x40000>;
+			};
+
+			partition@6c0000 {
+				label = "ospi.env.backup";
+				reg = <0x6c0000 0x40000>;
+			};
+
+			partition@800000 {
+				label = "ospi.rootfs";
+				reg = <0x800000 0x37c0000>;
+			};
+
+			partition@3fc0000 {
+				label = "ospi.phypattern";
+				reg = <0x3fc0000 0x40000>;
+				bootph-all;
+			};
+		};
+	};
 };
 
 &wkup_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
-	memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
-			<&wkup_r5fss0_core0_memory_region>;
 	bootph-pre-ram;
 };
 
-&mcu_r5fss0 {
-	status = "okay";
-};
-
 &mcu_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster2 &mbox_mcu_r5_0>;
-	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
-			<&mcu_r5fss0_core0_memory_region>;
 	firmware-name = "am62d-mcu-r5f0_0-fw";
-	status = "okay";
 };
 
 &c7x_0 {
-	mboxes = <&mailbox0_cluster1 &mbox_c7x_0>;
-	memory-region = <&c7x_0_dma_memory_region>,
-			<&c7x_0_memory_region>;
 	firmware-name = "am62d-c71_0-fw";
-	status = "okay";
 };
 
-/* main_rti4 is used by C7x DSP */
-&main_rti4 {
-	status = "reserved";
-};
+#include "k3-am62a-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
index 2e5e25a8ca86..0c05bcf1d776 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-main.dtsi
@@ -576,15 +576,12 @@
 		bus-width = <8>;
 		mmc-ddr-1_8v;
 		mmc-hs200-1_8v;
-		mmc-hs400-1_8v;
 		ti,clkbuf-sel = <0x7>;
-		ti,strobe-sel = <0x77>;
 		ti,trm-icp = <0x8>;
 		ti,otap-del-sel-legacy = <0x1>;
 		ti,otap-del-sel-mmc-hs = <0x1>;
 		ti,otap-del-sel-ddr52 = <0x6>;
 		ti,otap-del-sel-hs200 = <0x8>;
-		ti,otap-del-sel-hs400 = <0x5>;
 		ti,itap-del-sel-legacy = <0x10>;
 		ti,itap-del-sel-mmc-hs = <0xa>;
 		ti,itap-del-sel-ddr52 = <0x3>;
@@ -1045,6 +1042,9 @@
 		cdns_csi2rx0: csi-bridge@30101000 {
 			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
 			reg = <0x00 0x30101000 0x00 0x1000>;
+			interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error_irq", "irq";
 			clocks = <&k3_clks 182 0>, <&k3_clks 182 3>, <&k3_clks 182 0>,
 				<&k3_clks 182 0>, <&k3_clks 182 4>, <&k3_clks 182 4>;
 			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi
index bd6a00d13aea..5288c959f3c1 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-mcu.dtsi
@@ -205,6 +205,7 @@
 			ti,atcm-enable = <0>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <0>;
+			status = "disabled";
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi
index 6757b37a9de3..8612b45e665c 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-j722s-common-wakeup.dtsi
@@ -136,6 +136,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
index 6aea9d3f134e..908cc0760e7d 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-main.dtsi
@@ -74,3 +74,9 @@
 	gpio-reserved-ranges = <32 10>;
 	ti,ngpio = <52>;
 };
+
+&sdhci0 {
+	mmc-hs400-1_8v;
+	ti,strobe-sel = <0x66>;
+	ti,otap-del-sel-hs400 = <0x5>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-ti-ipc-firmware.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-ti-ipc-firmware.dtsi
new file mode 100644
index 000000000000..d29a5dbe13ef
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p-ti-ipc-firmware.dtsi
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * Device Tree Source for enabling IPC using TI SDK firmware on AM62P SoCs
+ *
+ * Copyright (C) 2023-2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&reserved_memory {
+	mcu_r5fss0_core0_dma_memory_region: memory@9b800000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0x9b800000 0x00 0x100000>;
+		no-map;
+	};
+
+	mcu_r5fss0_core0_memory_region: memory@9b900000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0x9b900000 0x00 0xf00000>;
+		no-map;
+	};
+};
+
+&mailbox0_cluster0 {
+	status = "okay";
+
+	mbox_r5_0: mbox-r5-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+
+	mbox_mcu_r5_0: mbox-mcu-r5-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&wkup_r5fss0 {
+	status = "okay";
+};
+
+&wkup_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
+	memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
+			<&wkup_r5fss0_core0_memory_region>;
+	status = "okay";
+};
+
+&mcu_r5fss0 {
+	status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster1 &mbox_mcu_r5_0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p-verdin.dtsi b/arch/arm64/boot/dts/ti/k3-am62p-verdin.dtsi
index a2fdc6741da2..99810047614e 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p-verdin.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p-verdin.dtsi
@@ -147,7 +147,7 @@
 		regulator-name = "+V_SODIMM";
 	};
 
-	reserved-memory {
+	reserved_memory: reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -162,7 +162,13 @@
 			no-map;
 		};
 
-		wkup_r5fss0_core0_memory_region: r5f-dma-memory@9c900000 {
+		wkup_r5fss0_core0_dma_memory_region: memory@9c800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9c800000 0x00 0x100000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_memory_region: memory@9c900000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0x9c900000 0x00 0x01e00000>;
 			no-map;
@@ -830,24 +836,6 @@
 	status = "disabled";
 };
 
-&mailbox0_cluster0 {
-	status = "okay";
-
-	mbox_r5_0: mbox-r5-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-};
-
-&mailbox0_cluster1 {
-	status = "okay";
-
-	mbox_mcu_r5_0: mbox-mcu-r5-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-};
-
 &main0_alert {
 	temperature = <95000>;
 };
@@ -1426,3 +1414,5 @@
 	uart-has-rtscts;
 	status = "disabled";
 };
+
+#include "k3-am62p-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
index 899da7896563..a064a632680e 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-sk.dts
@@ -44,30 +44,18 @@
 		bootph-pre-ram;
 	};
 
-	reserved-memory {
+	reserved_memory: reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
 
-		mcu_r5fss0_core0_dma_memory_region: mcu-r5fss-dma-memory-region@9b800000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x9b800000 0x00 0x100000>;
-			no-map;
-		};
-
-		mcu_r5fss0_core0_memory_region: mcu-r5fss-memory-region@9b900000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x9b900000 0x00 0xf00000>;
-			no-map;
-		};
-
-		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9c800000 {
+		wkup_r5fss0_core0_dma_memory_region: memory@9c800000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0x9c800000 0x00 0x100000>;
 			no-map;
 		};
 
-		wkup_r5fss0_core0_memory_region: r5f-memory@9c900000 {
+		wkup_r5fss0_core0_memory_region: memory@9c900000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0x9c900000 0x00 0xf00000>;
 			no-map;
@@ -360,7 +348,7 @@
 
 	main_usb1_pins_default: main-usb1-default-pins {
 		pinctrl-single,pins = <
-			AM62PX_IOPAD(0x0258, PIN_INPUT | PIN_DS_PULLUD_ENABLE | PIN_DS_PULL_UP, 0) /* (G21) USB1_DRVVBUS */
+			AM62PX_IOPAD(0x0258, PIN_INPUT, 0) /* (G21) USB1_DRVVBUS */
 		>;
 	};
 
@@ -607,6 +595,10 @@
 	};
 };
 
+&usb0_phy_ctrl {
+	bootph-all;
+};
+
 &usb1 {
 	dr_mode = "host";
 	pinctrl-names = "default";
@@ -699,44 +691,6 @@
 	};
 };
 
-&mailbox0_cluster0 {
-	status = "okay";
-
-	mbox_r5_0: mbox-r5-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-};
-
-&mailbox0_cluster1 {
-	status = "okay";
-
-	mbox_mcu_r5_0: mbox-mcu-r5-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-};
-
-&wkup_r5fss0 {
-	status = "okay";
-};
-
-&wkup_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
-	memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
-			<&wkup_r5fss0_core0_memory_region>;
-};
-
-&mcu_r5fss0 {
-	status = "okay";
-};
-
-&mcu_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster1 &mbox_mcu_r5_0>;
-	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
-			<&mcu_r5fss0_core0_memory_region>;
-};
-
 &main_uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
@@ -808,3 +762,5 @@
 	pinctrl-0 = <&main_epwm1_pins_default>;
 	status = "okay";
 };
+
+#include "k3-am62p-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-var-som-symphony.dts b/arch/arm64/boot/dts/ti/k3-am62p5-var-som-symphony.dts
new file mode 100644
index 000000000000..4bb92fde6ab8
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-var-som-symphony.dts
@@ -0,0 +1,500 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Variscite Symphony carrier board for VAR-SOM-AM62P
+ *
+ * Link: https://www.variscite.it/product/single-board-computers/symphony-board/
+ *
+ * Copyright (C) 2025 Variscite Ltd. - https://www.variscite.com/
+ *
+ */
+
+/dts-v1/;
+
+#include "k3-am62p5-var-som.dtsi"
+
+/ {
+	model = "Variscite VAR-SOM-AM62P on Symphony-Board";
+	compatible = "variscite,var-som-am62p-symphony", "variscite,var-som-am62p", "ti,am62p5";
+
+	aliases {
+		ethernet0 = &cpsw_port1;
+		ethernet1 = &cpsw_port2;
+		mmc0 = &sdhci0;
+		mmc1 = &sdhci1;
+		mmc2 = &sdhci2;
+		serial0 = &main_uart0;
+		serial2 = &main_uart2;
+		serial5 = &main_uart5;
+		serial6 = &main_uart6;
+		spi5 = &main_spi2;
+		usb0 = &usb0;
+		usb1 = &usb1;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	clk_ov5640_fixed: clock-24000000 {
+		#clock-cells = <0>;
+		compatible = "fixed-clock";
+		clock-frequency = <24000000>;
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		button-back {
+			label = "Back";
+			linux,code = <KEY_BACK>;
+			gpios = <&pca9534 1 GPIO_ACTIVE_LOW>;
+		};
+
+		button-home {
+			label = "Home";
+			linux,code = <KEY_HOME>;
+			gpios = <&pca9534 2 GPIO_ACTIVE_LOW>;
+		};
+
+		button-menu {
+			label = "Menu";
+			linux,code = <KEY_MENU>;
+			gpios = <&pca9534 3 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	gpio-leds {
+		compatible = "gpio-leds";
+
+		led-heartbeat {
+			label = "Heartbeat";
+			linux,default-trigger = "heartbeat";
+			gpios = <&pca9534 0 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	reg_2p8v: regulator-2p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "2P8V";
+		regulator-min-microvolt = <2800000>;
+		regulator-max-microvolt = <2800000>;
+		vin-supply = <&reg_3v3>;
+		regulator-always-on;
+	};
+
+	reg_1p8v: regulator-1p8v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&reg_3v3>;
+		regulator-always-on;
+	};
+
+	reg_1p5v: regulator-1p5v {
+		compatible = "regulator-fixed";
+		regulator-name = "1P5V";
+		regulator-min-microvolt = <1500000>;
+		regulator-max-microvolt = <1500000>;
+		vin-supply = <&reg_3v3>;
+		regulator-always-on;
+	};
+
+	reg_sdhc1_vmmc: regulator-sdhc1 {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_SD";
+		vin-supply = <&reg_sdhc1_vmmc_int>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&main_gpio0 30 GPIO_ACTIVE_HIGH>;
+		bootph-all;
+	};
+
+	reg_sdhc1_vmmc_int: regulator-sdhc1-int {
+		compatible = "regulator-fixed";
+		regulator-name = "+V3.3_SD_INT";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sd1_vmmc>;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		enable-active-high;
+		gpio = <&main_gpio0 53 GPIO_ACTIVE_HIGH>;
+		bootph-all;
+	};
+
+	reg_sdhc1_vqmmc: regulator-sdhci1-vqmmc {
+		compatible = "regulator-gpio";
+		regulator-name = "+V3.3_SD_VQMMC";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_sd1_vqmmc>;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		gpios = <&main_gpio0 56 GPIO_ACTIVE_HIGH>;
+		states = <1800000 0x0>,
+			 <3300000 0x1>;
+		bootph-all;
+	};
+
+	reg_ov5640_buf_en: regulator-camera-buf-en {
+		compatible = "regulator-fixed";
+		regulator-name = "ov5640_buf_en";
+		gpios = <&main_gpio0 21 GPIO_ACTIVE_HIGH>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	transceiver1: can-phy {
+		compatible = "ti,tcan1042";
+		#phy-cells = <0>;
+		max-bitrate = <5000000>;
+	};
+
+	connector {
+		compatible = "gpio-usb-b-connector", "usb-b-connector";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_extcon>;
+		label = "USB-C";
+		id-gpios = <&main_gpio1 12 GPIO_ACTIVE_HIGH>;
+		status = "okay";
+
+		port {
+			usb_con_hs: endpoint {
+				remote-endpoint = <&typec_hs>;
+			};
+		};
+	};
+};
+
+&cdns_csi2rx0 {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		csi0_port0: port@0 {
+			reg = <0>;
+			status = "okay";
+
+			csi2rx0_in_sensor: endpoint {
+				remote-endpoint = <&csi2_cam0>;
+				bus-type = <4>; /* CSI2 DPHY. */
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+};
+
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1>,
+		    <&pinctrl_rgmii2>;
+	status = "okay";
+};
+
+&cpsw3g_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mdio1>;
+	status = "okay";
+
+	cpsw3g_phy1: ethernet-phy@5 {
+		compatible = "ethernet-phy-id0283.bc30";
+		reg = <5>;
+		reset-gpios = <&pca9534 5 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <100000>;
+	};
+};
+
+&cpsw_port2 {
+	/*
+	 * The required RGMII TX and RX 2ns delays are implemented directly
+	 * in hardware via passive delay elements on the Symphony PCB.
+	 * No delay configuration is needed in software via PHY driver.
+	 */
+	phy-mode = "rgmii";
+	phy-handle = <&cpsw3g_phy1>;
+	status = "okay";
+};
+
+&dphy0 {
+	status = "okay";
+};
+
+&main_i2c0{
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c0>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	ov5640: camera@3c {
+		compatible = "ovti,ov5640";
+		reg = <0x3c>;
+		clocks = <&clk_ov5640_fixed>;
+		clock-names = "xclk";
+		AVDD-supply = <&reg_2p8v>;
+		DOVDD-supply = <&reg_1p8v>;
+		DVDD-supply = <&reg_1p5v>;
+		powerdown-gpios = <&main_gpio0 10 GPIO_ACTIVE_HIGH>;
+		reset-gpios = <&main_gpio0 22 GPIO_ACTIVE_LOW>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ov5640>;
+
+		port {
+			csi2_cam0: endpoint {
+				remote-endpoint = <&csi2rx0_in_sensor>;
+				clock-lanes = <0>;
+				data-lanes = <1 2>;
+			};
+		};
+	};
+
+	/* GPIO expander */
+	pca9534: gpio@20 {
+		compatible = "nxp,pca9534";
+		reg = <0x20>;
+		gpio-controller;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca9534>;
+		interrupt-parent = <&main_gpio1>;
+		interrupts = <30 IRQ_TYPE_EDGE_FALLING>;
+		#gpio-cells = <2>;
+		status = "okay";
+
+		usb3-sel-hog {
+			gpio-hog;
+			gpios = <4 0>;
+			output-low;
+			line-name = "usb3_sel";
+		};
+
+		eth-som-vselect-hog {
+			gpio-hog;
+			gpios = <6 0>;
+			output-low;
+			line-name = "eth-vselect";
+		};
+
+		eth-mdio-enable-hog {
+			gpio-hog;
+			gpios = <7 0>;
+			output-high;
+			line-name = "eth-mdio-enable";
+		};
+	};
+};
+
+&main_i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <400000>;
+	status = "okay";
+
+	rtc@68 {
+		compatible = "dallas,ds1337";
+		reg = <0x68>;
+	};
+};
+
+&main_mcan0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mcan0>;
+	phys = <&transceiver1>;
+	status = "okay";
+};
+
+&main_pmx0 {
+	pinctrl_extcon: main-extcon-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01a8, PIN_INPUT, 7) /* (F25) MCASP0_AFSX.GPIO1_12 */
+		>;
+	};
+
+	pinctrl_i2c0: main-i2c0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01e0, PIN_INPUT_PULLUP, 0) /* (B25) I2C0_SCL */
+			AM62PX_IOPAD(0x01e4, PIN_INPUT_PULLUP, 0) /* (A24) I2C0_SDA */
+		>;
+	};
+
+	pinctrl_i2c1: main-i2c1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01e8, PIN_INPUT_PULLUP, 0) /* (C24) I2C1_SCL */
+			AM62PX_IOPAD(0x01ec, PIN_INPUT_PULLUP, 0) /* (B24) I2C1_SDA */
+		>;
+		bootph-all;
+	};
+
+	pinctrl_mcan0: main-mcan0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01dc, PIN_INPUT, 0) /* (F20) MCAN0_RX */
+			AM62PX_IOPAD(0x01d8, PIN_OUTPUT, 0) /* (B23) MCAN0_TX */
+		>;
+	};
+
+	pinctrl_mmc1: main-mmc1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x023c, PIN_INPUT, 0) /* (H20) MMC1_CMD */
+			AM62PX_IOPAD(0x0234, PIN_OUTPUT, 0) /* (J24) MMC1_CLK */
+			AM62PX_IOPAD(0x0230, PIN_INPUT, 0) /* (H21) MMC1_DAT0 */
+			AM62PX_IOPAD(0x022c, PIN_INPUT, 0) /* (H23) MMC1_DAT1 */
+			AM62PX_IOPAD(0x0228, PIN_INPUT, 0) /* (H22) MMC1_DAT2 */
+			AM62PX_IOPAD(0x0224, PIN_INPUT, 0) /* (H25) MMC1_DAT3 */
+			AM62PX_IOPAD(0x0240, PIN_INPUT, 0) /* (D23) MMC1_SDCD */
+		>;
+		bootph-all;
+	};
+
+	pinctrl_rgmii2: main-rgmii2-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0184, PIN_INPUT, 0) /* (E19) RGMII2_RD0 */
+			AM62PX_IOPAD(0x0188, PIN_INPUT, 0) /* (E16) RGMII2_RD1 */
+			AM62PX_IOPAD(0x018c, PIN_INPUT, 0) /* (E17) RGMII2_RD2 */
+			AM62PX_IOPAD(0x0190, PIN_INPUT, 0) /* (C19) RGMII2_RD3 */
+			AM62PX_IOPAD(0x0180, PIN_INPUT, 0) /* (D19) RGMII2_RXC */
+			AM62PX_IOPAD(0x017c, PIN_INPUT, 0) /* (F19) RGMII2_RX_CTL */
+			AM62PX_IOPAD(0x016c, PIN_INPUT, 0) /* (B19) RGMII2_TD0 */
+			AM62PX_IOPAD(0x0170, PIN_INPUT, 0) /* (A21) RGMII2_TD1 */
+			AM62PX_IOPAD(0x0174, PIN_INPUT, 0) /* (D17) RGMII2_TD2 */
+			AM62PX_IOPAD(0x0178, PIN_INPUT, 0) /* (A19) RGMII2_TD3 */
+			AM62PX_IOPAD(0x0168, PIN_INPUT_PULLDOWN, 0) /* (D16) RGMII2_TXC */
+			AM62PX_IOPAD(0x0164, PIN_INPUT, 0) /* (A20) RGMII2_TX_CTL */
+		>;
+	};
+
+	pinctrl_spi2: main-spi2-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01b0, PIN_INPUT, 1) /* (G20) MCASP0_ACLKR.SPI2_CLK */
+			AM62PX_IOPAD(0x0194, PIN_OUTPUT, 1) /* (D25) MCASP0_AXR3.SPI2_D0 */
+			AM62PX_IOPAD(0x0198, PIN_INPUT, 1) /* (E25) MCASP0_AXR2.SPI2_D1 */
+			AM62PX_IOPAD(0x01ac, PIN_OUTPUT, 7) /* (G23) MCASP0_AFSR.GPIO1_13 */
+		>;
+	};
+
+	pinctrl_uart0: main-uart0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x1c8, PIN_INPUT, 0)	/* (A22) UART0_RXD */
+			AM62PX_IOPAD(0x1cc, PIN_OUTPUT, 0)	/* (B22) UART0_TXD */
+		>;
+		bootph-all;
+	};
+
+	pinctrl_uart2: main-uart2-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x005c, PIN_INPUT_PULLUP, 2) /* (AC25) GPMC0_AD8.UART2_RXD */
+			AM62PX_IOPAD(0x0060, PIN_OUTPUT, 2) /* (AB25) GPMC0_AD9.UART2_TXD */
+		>;
+	};
+
+	pinctrl_uart6: main-uart6-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x009c, PIN_INPUT_PULLUP, 3) /* (AD24) GPMC0_WAIT1.UART6_RXD */
+			AM62PX_IOPAD(0x0244, PIN_OUTPUT, 1) /* (D24) MMC1_SDWP.UART6_TXD */
+		>;
+	};
+
+	pinctrl_usb1: main-usb1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0258, PIN_OUTPUT, 0) /* (G21) USB1_DRVVBUS */
+		>;
+	};
+
+	pinctrl_ov5640: main-ov5640-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0028, PIN_OUTPUT, 7) /* (N20) OSPI0_D7.GPIO0_10 */
+			AM62PX_IOPAD(0x0054, PIN_OUTPUT, 7) /* (V24) GPMC0_AD6.GPIO0_21 */
+			AM62PX_IOPAD(0x0058, PIN_OUTPUT, 7) /* (W25) GPMC0_AD7.GPIO0_22 */
+		>;
+	};
+
+	pinctrl_pca9534: main-pca9534-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01f0, PIN_INPUT, 7) /* (C25) EXT_REFCLK1.GPIO1_30 */
+		>;
+	};
+
+	pinctrl_sd1_vmmc: main-sd1-vmmc-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0078, PIN_OUTPUT, 7) /* (AC24) GPMC0_AD15.GPIO0_30 */
+			AM62PX_IOPAD(0x00d8, PIN_OUTPUT, 7) /* (AE22) VOUT0_DATA8.GPIO0_53 */
+		>;
+		bootph-all;
+	};
+
+	pinctrl_sd1_vqmmc: main-sd1-vqmmc-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00e4, PIN_OUTPUT, 7) /* (AE21) VOUT0_DATA11.GPIO0_56 */
+		>;
+		bootph-all;
+	};
+};
+
+&main_spi2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi2>;
+	ti,pindir-d0-out-d1-in;
+	cs-gpios = <&main_gpio1 13 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&main_uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0>;
+	status = "okay";
+};
+
+&main_uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&main_uart6 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart6>;
+	status = "okay";
+};
+
+&sdhci1 {
+	/* SD Card */
+	vmmc-supply = <&reg_sdhc1_vmmc>;
+	vqmmc-supply = <&reg_sdhc1_vqmmc>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mmc1>;
+	disable-wp;
+	bootph-all;
+	status="okay";
+};
+
+&ti_csi2rx0 {
+	status = "okay";
+};
+
+&usb0 {
+	usb-role-switch;
+	status = "okay";
+
+	port {
+		typec_hs: endpoint {
+			remote-endpoint = <&usb_con_hs>;
+		};
+	};
+};
+
+&usb1 {
+	dr_mode = "host";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1>;
+	status = "okay";
+};
+
+&usbss0 {
+	status = "okay";
+};
+
+&usbss1 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi b/arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi
new file mode 100644
index 000000000000..edaa4f99295d
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am62p5-var-som.dtsi
@@ -0,0 +1,387 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Common dtsi for Variscite VAR-SOM-AM62P
+ *
+ * Link: https://www.variscite.com/product/system-on-module-som/cortex-a53-krait/var-som-am62p-ti-sitara-am62px/
+ *
+ * Copyright (C) 2025 Variscite Ltd. - https://www.variscite.com/
+ *
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "k3-am62p5.dtsi"
+
+/ {
+	compatible = "variscite,var-som-am62p", "ti,am62p5";
+
+	wifi_pwrseq: wifi-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		post-power-on-delay-ms = <100>;
+		power-off-delay-us = <10000>;
+		reset-gpios = <&main_gpio0 54 GPIO_ACTIVE_LOW>,	/* WIFI_PWR_EN */
+			      <&main_gpio0 59 GPIO_ACTIVE_LOW>;	/* WIFI_EN */
+	};
+
+	mmc_pwrseq: mmc-pwrseq {
+		compatible = "mmc-pwrseq-emmc";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mmc_pwrseq>;
+		reset-gpios = <&main_gpio0 49 GPIO_ACTIVE_LOW>;
+	};
+
+	memory@80000000 {
+		/* 8G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+		      <0x00000008 0x80000000 0x00000001 0x80000000>;
+		device_type = "memory";
+		bootph-pre-ram;
+	};
+
+	opp-table {
+		/* Add 1.4GHz OPP for am62p5-sk board. Requires VDD_CORE at 0v85 */
+		opp-1400000000 {
+			opp-hz = /bits/ 64 <1400000000>;
+			opp-supported-hw = <0x01 0x0004>;
+			clock-latency-ns = <6000000>;
+		};
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		rtos_ipc_memory_region: rtos-ipc-memory@9b500000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9b500000 0x00 0x00300000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_dma_memory_region: mcu-r5fss-dma-memory-region@9b800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9b800000 0x00 0x00100000>;
+			no-map;
+		};
+
+		mcu_r5fss0_core0_memory_region: mcu-r5fss-memory-region@9b900000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9b900000 0x00 0x00f00000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9c800000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9c800000 0x00 0x00100000>;
+			no-map;
+		};
+
+		wkup_r5fss0_core0_memory_region: r5f-memory@9c900000 {
+			compatible = "shared-dma-pool";
+			reg = <0x00 0x9c900000 0x00 0x01e00000>;
+			no-map;
+		};
+
+		secure_tfa_ddr: tfa@9e780000 {
+			reg = <0x00 0x9e780000 0x00 0x80000>;
+			no-map;
+		};
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>; /* for OP-TEE */
+			no-map;
+		};
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "On-module +V3.3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "On-module +V1.8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		vin-supply = <&reg_3v3>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	reg_3v3_phy: regulator-3v3-phy {
+		compatible = "regulator-fixed";
+		regulator-name = "On-module +V3.3_PHY";
+		gpios = <&main_gpio0 45 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		regulator-always-on;
+	};
+};
+
+&cpsw3g {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_rgmii1>;
+};
+
+&cpsw3g_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mdio1>;
+	status = "okay";
+
+	cpsw3g_phy0: ethernet-phy@4 {
+		compatible = "ethernet-phy-id0283.bc30";
+		reg = <4>;
+		reset-gpios = <&main_gpio0 46 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <10000>;
+		reset-deassert-us = <100000>;
+	};
+};
+
+&cpsw_port1 {
+	/*
+	 * The required RGMII TX and RX 2ns delays are implemented directly
+	 * in hardware via passive delay elements on the SOM PCB.
+	 * No delay configuration is needed in software via PHY driver.
+	 */
+	phy-mode = "rgmii";
+	phy-handle = <&cpsw3g_phy0>;
+	status = "okay";
+};
+
+&main_i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&main_i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	clock-frequency = <400000>;
+	status = "okay";
+};
+
+&main_pmx0 {
+	pinctrl_mmc_pwrseq: main-emmc-pwrseq-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00c8, PIN_OUTPUT, 7) /* (AB23) VOUT0_DATA4.GPIO0_49 */
+		>;
+	};
+
+	pinctrl_i2c2: main-i2c2-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00b0, PIN_INPUT_PULLUP, 1) /* (T22) GPMC0_CSn2.I2C2_SCL */
+			AM62PX_IOPAD(0x00b4, PIN_INPUT_PULLUP, 1) /* (U25) GPMC0_CSn3.I2C2_SDA */
+		>;
+	};
+
+	pinctrl_i2c3: main-i2c3-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01d0, PIN_INPUT_PULLUP, 2) /* (A23) UART0_CTSn.I2C3_SCL */
+			AM62PX_IOPAD(0x01d4, PIN_INPUT_PULLUP, 2) /* (C22) UART0_RTSn.I2C3_SDA */
+		>;
+	};
+
+	pinctrl_mdio1: main-mdio1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0160, PIN_OUTPUT, 0) /* (F17) MDIO0_MDC */
+			AM62PX_IOPAD(0x015c, PIN_INPUT, 0) /* (F16) MDIO0_MDIO */
+		>;
+	};
+
+	pinctrl_mmc2: main-mmc2-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x0120, PIN_INPUT_PULLUP, 0) /* (K24) MMC2_CMD */
+			AM62PX_IOPAD(0x0118, PIN_INPUT_PULLDOWN, 0) /* (K21) MMC2_CLK */
+			AM62PX_IOPAD(0x011c, PIN_INPUT_PULLUP, 0) /* () MMC2_CLKLB */
+			AM62PX_IOPAD(0x0114, PIN_INPUT_PULLUP, 0) /* (K23) MMC2_DAT0 */
+			AM62PX_IOPAD(0x0110, PIN_INPUT_PULLUP, 0) /* (K22) MMC2_DAT1 */
+			AM62PX_IOPAD(0x010c, PIN_INPUT_PULLUP, 0) /* (L20) MMC2_DAT2 */
+			AM62PX_IOPAD(0x0108, PIN_INPUT_PULLUP, 0) /* (L21) MMC2_DAT3 */
+		>;
+	};
+
+	pinctrl_rgmii1: main-rgmii1-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x014c, PIN_INPUT, 0) /* (B15) RGMII1_RD0 */
+			AM62PX_IOPAD(0x0150, PIN_INPUT, 0) /* (B16) RGMII1_RD1 */
+			AM62PX_IOPAD(0x0154, PIN_INPUT, 0) /* (A14) RGMII1_RD2 */
+			AM62PX_IOPAD(0x0158, PIN_INPUT, 0) /* (B14) RGMII1_RD3 */
+			AM62PX_IOPAD(0x0148, PIN_INPUT, 0) /* (A16) RGMII1_RXC */
+			AM62PX_IOPAD(0x0144, PIN_INPUT, 0) /* (A15) RGMII1_RX_CTL */
+			AM62PX_IOPAD(0x0134, PIN_INPUT, 0) /* (A18) RGMII1_TD0 */
+			AM62PX_IOPAD(0x0138, PIN_INPUT, 0) /* (C17) RGMII1_TD1 */
+			AM62PX_IOPAD(0x013c, PIN_INPUT, 0) /* (A17) RGMII1_TD2 */
+			AM62PX_IOPAD(0x0140, PIN_INPUT, 0) /* (C16) RGMII1_TD3 */
+			AM62PX_IOPAD(0x0130, PIN_INPUT, 0) /* (B17) RGMII1_TXC */
+			AM62PX_IOPAD(0x012c, PIN_INPUT, 0) /* (B18) RGMII1_TX_CTL */
+		>;
+		bootph-all;
+	};
+
+	pinctrl_spi0: main-spi0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x01bc, PIN_OUTPUT, 0) /* (B21) SPI0_CLK */
+			AM62PX_IOPAD(0x01b4, PIN_OUTPUT, 0) /* (D20) SPI0_CS0 */
+			AM62PX_IOPAD(0x01c0, PIN_OUTPUT, 0) /* (B20) SPI0_D0 */
+			AM62PX_IOPAD(0x01c4, PIN_INPUT, 0) /* (C21) SPI0_D1 */
+		>;
+	};
+
+	pinctrl_uart5: main-uart5-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00ec, PIN_INPUT, 4) /* (AC21) VOUT0_DATA13.UART5_CTSn */
+			AM62PX_IOPAD(0x00e8, PIN_OUTPUT, 4) /* (AD21) VOUT0_DATA12.UART5_RTSn */
+			AM62PX_IOPAD(0x00d0, PIN_INPUT, 4) /* (AC23) VOUT0_DATA6.UART5_RXD */
+			AM62PX_IOPAD(0x00d4, PIN_OUTPUT, 4) /* (AE23) VOUT0_DATA7.UART5_TXD */
+		>;
+	};
+
+	pinctrl_bt: main-btgrp-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00f4, PIN_OUTPUT, 7) /* (Y20) VOUT0_DATA15.GPIO0_60 (BT_EN) */
+		>;
+	};
+
+	pinctrl_restouch: main-restouch-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00c4, PIN_INPUT_PULLUP, 7) /* (Y23) VOUT0_DATA3.GPIO0_48 */
+		>;
+	};
+
+	pinctrl_wifi: main-wifi-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_IOPAD(0x00dc, PIN_OUTPUT, 7) /* (AC22) VOUT0_DATA9.GPIO0_54 - WIFI_PWR_EN - */
+			AM62PX_IOPAD(0x00f0, PIN_OUTPUT, 7) /* (AA20) VOUT0_DATA14.GPIO0_59 - WIFI_EN - */
+		>;
+	};
+};
+
+&mcu_pmx0 {
+	pinctrl_wkup_clkout0: wkup-clkout0-default-pins {
+		pinctrl-single,pins = <
+			AM62PX_MCU_IOPAD(0x0084, PIN_OUTPUT, 0) /* (F13) WKUP_CLKOUT0 */
+		>;
+	};
+};
+
+&main_spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spi0>;
+	ti,pindir-d0-out-d1-in;
+	status = "okay";
+};
+
+&main_uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>, <&pinctrl_bt>;
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "nxp,88w8987-bt";
+	};
+};
+
+&sdhci0 {
+	/* On-module eMMC */
+	ti,driver-strength-ohm = <50>;
+	mmc-pwrseq = <&mmc_pwrseq>;
+	bootph-all;
+	status = "okay";
+};
+
+&sdhci2 {
+	/* On-module WiFi */
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_mmc2>, <&pinctrl_wifi>;
+	bus-width = <4>;
+	non-removable;
+	keep-power-in-suspend;
+	mmc-pwrseq = <&wifi_pwrseq>;
+	ti,fails-without-test-cd;
+	status = "okay";
+};
+
+&usbss0 {
+	ti,vbus-divider;
+};
+
+&usbss1 {
+	ti,vbus-divider;
+};
+
+&mailbox0_cluster0 {
+	status = "okay";
+
+	mbox_r5_0: mbox-r5-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+
+	mbox_mcu_r5_0: mbox-mcu-r5-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mcu_r5fss0 {
+	status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster1 &mbox_mcu_r5_0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+};
+
+&wkup_r5fss0 {
+	status = "okay";
+};
+
+&wkup_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
+	memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
+			<&wkup_r5fss0_core0_memory_region>;
+};
+
+/* mcu_gpio0 and mcu_gpio_intr are reserved for mcu firmware usage */
+&mcu_gpio0 {
+	status = "reserved";
+};
+
+&mcu_gpio_intr {
+	status = "reserved";
+};
+
+&wkup_rtc0 {
+	status = "disabled";
+};
+
+&wkup_rti0 {
+	/* WKUP RTI0 is used by DM firmware */
+	status = "reserved";
+};
+
+&wkup_uart0 {
+	/* WKUP UART0 is used by DM firmware */
+	status = "reserved";
+};
+
+&main_uart1 {
+	/* Main UART1 is used by TIFS firmware */
+	status = "reserved";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am62p5.dtsi b/arch/arm64/boot/dts/ti/k3-am62p5.dtsi
index 202378d9d5cf..8982a7b9f1a6 100644
--- a/arch/arm64/boot/dts/ti/k3-am62p5.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62p5.dtsi
@@ -135,7 +135,7 @@
 
 		opp-1000000000 {
 			opp-hz = /bits/ 64 <1000000000>;
-			opp-supported-hw = <0x01 0x0006>;
+			opp-supported-hw = <0x01 0x0007>;
 			clock-latency-ns = <6000000>;
 		};
 
diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
index 13e1d36123d5..58f78c0de292 100644
--- a/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-common.dtsi
@@ -8,7 +8,6 @@
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/net/ti-dp83867.h>
-#include "k3-am625.dtsi"
 
 / {
 	aliases {
@@ -29,14 +28,7 @@
 		stdout-path = "serial2:115200n8";
 	};
 
-	memory@80000000 {
-		bootph-pre-ram;
-		device_type = "memory";
-		/* 2G RAM */
-		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
-	};
-
-	reserved-memory {
+	reserved_memory: reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -58,25 +50,13 @@
 			linux,cma-default;
 		};
 
-		mcu_m4fss_dma_memory_region: m4f-dma-memory@9cb00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x9cb00000 0x00 0x100000>;
-			no-map;
-		};
-
-		mcu_m4fss_memory_region: m4f-memory@9cc00000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0x9cc00000 0x00 0xe00000>;
-			no-map;
-		};
-
-		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@9da00000 {
+		wkup_r5fss0_core0_dma_memory_region: memory@9da00000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0x9da00000 0x00 0x100000>;
 			no-map;
 		};
 
-		wkup_r5fss0_core0_memory_region: r5f-memory@9db00000 {
+		wkup_r5fss0_core0_memory_region: memory@9db00000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0x9db00000 0x00 0xc00000>;
 			no-map;
@@ -249,7 +229,7 @@
 
 	main_usb1_pins_default: main-usb1-default-pins {
 		pinctrl-single,pins = <
-			AM62X_IOPAD(0x0258, PIN_OUTPUT | PIN_DS_PULLUD_ENABLE | PIN_DS_PULL_UP, 0) /* (F18/E16) USB1_DRVVBUS */
+			AM62X_IOPAD(0x0258, PIN_OUTPUT, 0) /* (F18/E16) USB1_DRVVBUS */
 		>;
 	};
 
@@ -477,37 +457,6 @@
 	};
 };
 
-&mailbox0_cluster0 {
-	status = "okay";
-
-	mbox_m4_0: mbox-m4-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_r5_0: mbox-r5-0 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mcu_m4fss {
-	mboxes = <&mailbox0_cluster0 &mbox_m4_0>;
-	memory-region = <&mcu_m4fss_dma_memory_region>,
-			<&mcu_m4fss_memory_region>;
-	status = "okay";
-};
-
-&wkup_r5fss0 {
-	status = "okay";
-};
-
-&wkup_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster0 &mbox_r5_0>;
-	memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
-			<&wkup_r5fss0_core0_memory_region>;
-};
-
 &usbss0 {
 	bootph-all;
 	status = "okay";
@@ -530,6 +479,10 @@
 	};
 };
 
+&usb0_phy_ctrl {
+	bootph-all;
+};
+
 &usb1 {
 	dr_mode = "host";
 	pinctrl-names = "default";
@@ -600,3 +553,5 @@
 	pinctrl-0 = <&main_epwm1_pins_default>;
 	status = "okay";
 };
+
+#include "k3-am62-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
index c7e5da37486a..d872cc671094 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-main.dtsi
@@ -921,6 +921,7 @@
 			 <0x78200000 0x00 0x78200000 0x08000>,
 			 <0x78300000 0x00 0x78300000 0x08000>;
 		power-domains = <&k3_pds 119 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 
 		main_r5fss0_core0: r5f@78000000 {
 			compatible = "ti,am64-r5f";
@@ -935,6 +936,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 
 		main_r5fss0_core1: r5f@78200000 {
@@ -950,6 +952,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 	};
 
@@ -963,6 +966,7 @@
 			 <0x78600000 0x00 0x78600000 0x08000>,
 			 <0x78700000 0x00 0x78700000 0x08000>;
 		power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 
 		main_r5fss1_core0: r5f@78400000 {
 			compatible = "ti,am64-r5f";
@@ -977,6 +981,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 
 		main_r5fss1_core1: r5f@78600000 {
@@ -992,6 +997,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
index d9d491b12c33..02ef1dd92eaa 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
@@ -41,71 +41,17 @@
 			no-map;
 		};
 
-		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+		main_r5fss0_core0_dma_memory_region: memory@a0000000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0000000 0x00 0x100000>;
 			no-map;
 		};
 
-		main_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+		main_r5fss0_core0_memory_region: memory@a0100000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0100000 0x00 0xf00000>;
 			no-map;
 		};
-
-		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_memory_region: r5f-memory@a1100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_memory_region: r5f-memory@a2100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_memory_region: r5f-memory@a3100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		mcu_m4fss_dma_memory_region: m4f-dma-memory@a4000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4000000 0x00 0x100000>;
-			no-map;
-		};
-
-		mcu_m4fss_memory_region: m4f-memory@a4100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		rtos_ipc_memory_region: ipc-memories@a5000000 {
-			reg = <0x00 0xa5000000 0x00 0x00800000>;
-			alignment = <0x1000>;
-			no-map;
-		};
 	};
 
 	leds {
@@ -238,43 +184,6 @@
 	status = "okay";
 };
 
-&mailbox0_cluster2 {
-	status = "okay";
-
-	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
-		ti,mbox-rx = <0 0 2>;
-		ti,mbox-tx = <1 0 2>;
-	};
-
-	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
-		ti,mbox-rx = <2 0 2>;
-		ti,mbox-tx = <3 0 2>;
-	};
-};
-
-&mailbox0_cluster4 {
-	status = "okay";
-
-	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
-		ti,mbox-rx = <0 0 2>;
-		ti,mbox-tx = <1 0 2>;
-	};
-
-	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
-		ti,mbox-rx = <2 0 2>;
-		ti,mbox-tx = <3 0 2>;
-	};
-};
-
-&mailbox0_cluster6 {
-	status = "okay";
-
-	mbox_m4_0: mbox-m4-0 {
-		ti,mbox-rx = <0 0 2>;
-		ti,mbox-tx = <1 0 2>;
-	};
-};
-
 &main_i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_pins_default>;
@@ -349,37 +258,6 @@
 	bootph-all;
 };
 
-&main_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>;
-	memory-region = <&main_r5fss0_core0_dma_memory_region>,
-			<&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>;
-	memory-region = <&main_r5fss0_core1_dma_memory_region>,
-			<&main_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss1_core0 {
-	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>;
-	memory-region = <&main_r5fss1_core0_dma_memory_region>,
-			<&main_r5fss1_core0_memory_region>;
-};
-
-&main_r5fss1_core1 {
-	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>;
-	memory-region = <&main_r5fss1_core1_dma_memory_region>,
-			<&main_r5fss1_core1_memory_region>;
-};
-
-&mcu_m4fss {
-	mboxes = <&mailbox0_cluster6 &mbox_m4_0>;
-	memory-region = <&mcu_m4fss_dma_memory_region>,
-			<&mcu_m4fss_memory_region>;
-	status = "okay";
-};
-
 &ospi0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&ospi0_pins_default>;
@@ -415,3 +293,5 @@
 		ti,adc-channels = <0 1 2 3 4 5 6 7>;
 	};
 };
+
+#include "k3-am64-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am64-ti-ipc-firmware.dtsi b/arch/arm64/boot/dts/ti/k3-am64-ti-ipc-firmware.dtsi
new file mode 100644
index 000000000000..6b10646ae64a
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am64-ti-ipc-firmware.dtsi
@@ -0,0 +1,162 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * Device Tree Source for enabling IPC using TI SDK firmware on AM64 SoCs
+ *
+ * Copyright (C) 2024-2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&reserved_memory {
+	main_r5fss0_core1_dma_memory_region: memory@a1000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa1000000 0x00 0x100000>;
+		no-map;
+	};
+
+	main_r5fss0_core1_memory_region: memory@a1100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa1100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	main_r5fss1_core0_dma_memory_region: memory@a2000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa2000000 0x00 0x100000>;
+		no-map;
+	};
+
+	main_r5fss1_core0_memory_region: memory@a2100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa2100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	main_r5fss1_core1_dma_memory_region: memory@a3000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa3000000 0x00 0x100000>;
+		no-map;
+	};
+
+	main_r5fss1_core1_memory_region: memory@a3100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa3100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	mcu_m4fss_dma_memory_region: memory@a4000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa4000000 0x00 0x100000>;
+		no-map;
+	};
+
+	mcu_m4fss_memory_region: memory@a4100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa4100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	rtos_ipc_memory_region: memory@a5000000 {
+		reg = <0x00 0xa5000000 0x00 0x00800000>;
+		alignment = <0x1000>;
+		no-map;
+	};
+};
+
+&mailbox0_cluster2 {
+	status = "okay";
+
+	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+		ti,mbox-rx = <0 0 2>;
+		ti,mbox-tx = <1 0 2>;
+	};
+
+	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+		ti,mbox-rx = <2 0 2>;
+		ti,mbox-tx = <3 0 2>;
+	};
+};
+
+&mailbox0_cluster4 {
+	status = "okay";
+
+	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+		ti,mbox-rx = <0 0 2>;
+		ti,mbox-tx = <1 0 2>;
+	};
+
+	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+		ti,mbox-rx = <2 0 2>;
+		ti,mbox-tx = <3 0 2>;
+	};
+};
+
+&mailbox0_cluster6 {
+	status = "okay";
+
+	mbox_m4_0: mbox-m4-0 {
+		ti,mbox-rx = <0 0 2>;
+		ti,mbox-tx = <1 0 2>;
+	};
+};
+
+/* main_timer8 is used by r5f0-0 */
+&main_timer8 {
+	status = "reserved";
+};
+
+/* main_timer9 is used by r5f0-1 */
+&main_timer9 {
+	status = "reserved";
+};
+
+/* main_timer10 is used by r5f1-0 */
+&main_timer10 {
+	status = "reserved";
+};
+
+/* main_timer11 is used by r5f1-1 */
+&main_timer11 {
+	status = "reserved";
+};
+
+&main_r5fss0 {
+	status = "okay";
+};
+
+&main_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+	status = "okay";
+};
+
+&main_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>;
+	memory-region = <&main_r5fss0_core1_dma_memory_region>,
+			<&main_r5fss0_core1_memory_region>;
+	status = "okay";
+};
+
+&main_r5fss1 {
+	status = "okay";
+};
+
+&main_r5fss1_core0 {
+	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>;
+	memory-region = <&main_r5fss1_core0_dma_memory_region>,
+			<&main_r5fss1_core0_memory_region>;
+	status = "okay";
+};
+
+&main_r5fss1_core1 {
+	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>;
+	memory-region = <&main_r5fss1_core1_dma_memory_region>,
+			<&main_r5fss1_core1_memory_region>;
+	status = "okay";
+};
+
+&mcu_m4fss {
+	mboxes = <&mailbox0_cluster6 &mbox_m4_0>;
+	memory-region = <&mcu_m4fss_dma_memory_region>,
+			<&mcu_m4fss_memory_region>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am642-evm.dts b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
index e01866372293..85dcff104936 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-evm.dts
@@ -42,7 +42,7 @@
 		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
 	};
 
-	reserved-memory {
+	reserved_memory: reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -53,71 +53,17 @@
 			no-map;
 		};
 
-		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+		main_r5fss0_core0_dma_memory_region: memory@a0000000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0000000 0x00 0x100000>;
 			no-map;
 		};
 
-		main_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+		main_r5fss0_core0_memory_region: memory@a0100000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0100000 0x00 0xf00000>;
 			no-map;
 		};
-
-		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_memory_region: r5f-memory@a1100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_memory_region: r5f-memory@a2100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_memory_region: r5f-memory@a3100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		mcu_m4fss_dma_memory_region: m4f-dma-memory@a4000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4000000 0x00 0x100000>;
-			no-map;
-		};
-
-		mcu_m4fss_memory_region: m4f-memory@a4100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		rtos_ipc_memory_region: ipc-memories@a5000000 {
-			reg = <0x00 0xa5000000 0x00 0x00800000>;
-			alignment = <0x1000>;
-			no-map;
-		};
 	};
 
 	evm_12v0: regulator-0 {
@@ -727,94 +673,6 @@
 	};
 };
 
-&mailbox0_cluster2 {
-	status = "okay";
-
-	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
-		ti,mbox-rx = <0 0 2>;
-		ti,mbox-tx = <1 0 2>;
-	};
-
-	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
-		ti,mbox-rx = <2 0 2>;
-		ti,mbox-tx = <3 0 2>;
-	};
-};
-
-&mailbox0_cluster4 {
-	status = "okay";
-
-	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
-		ti,mbox-rx = <0 0 2>;
-		ti,mbox-tx = <1 0 2>;
-	};
-
-	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
-		ti,mbox-rx = <2 0 2>;
-		ti,mbox-tx = <3 0 2>;
-	};
-};
-
-&mailbox0_cluster6 {
-	status = "okay";
-
-	mbox_m4_0: mbox-m4-0 {
-		ti,mbox-rx = <0 0 2>;
-		ti,mbox-tx = <1 0 2>;
-	};
-};
-
-&main_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>;
-	memory-region = <&main_r5fss0_core0_dma_memory_region>,
-			<&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>;
-	memory-region = <&main_r5fss0_core1_dma_memory_region>,
-			<&main_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss1_core0 {
-	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>;
-	memory-region = <&main_r5fss1_core0_dma_memory_region>,
-			<&main_r5fss1_core0_memory_region>;
-};
-
-&main_r5fss1_core1 {
-	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>;
-	memory-region = <&main_r5fss1_core1_dma_memory_region>,
-			<&main_r5fss1_core1_memory_region>;
-};
-
-&mcu_m4fss {
-	mboxes = <&mailbox0_cluster6 &mbox_m4_0>;
-	memory-region = <&mcu_m4fss_dma_memory_region>,
-			<&mcu_m4fss_memory_region>;
-	status = "okay";
-};
-
-/* main_timer8 is used by r5f0-0 */
-&main_timer8 {
-	status = "reserved";
-};
-
-/* main_timer9 is used by r5f0-1 */
-&main_timer9 {
-	status = "reserved";
-};
-
-/* main_timer10 is used by r5f1-0 */
-&main_timer10 {
-	status = "reserved";
-};
-
-/* main_timer11 is used by r5f1-1 */
-&main_timer11 {
-	status = "reserved";
-};
-
 &serdes_ln_ctrl {
 	idle-states = <AM64_SERDES0_LANE0_PCIE0>;
 };
@@ -878,3 +736,5 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&icssg1_iep0_pins_default>;
 };
+
+#include "k3-am64-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-peb-c-010.dtso b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-peb-c-010.dtso
new file mode 100644
index 000000000000..7fc73cfacadb
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-peb-c-010.dtso
@@ -0,0 +1,158 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Copyright (C) 2025 PHYTEC America LLC
+ * Author: Garrett Giordano <ggiordano@phytec.com>
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/net/ti-dp83869.h>
+#include "k3-pinctrl.h"
+
+&{/} {
+	aliases {
+		ethernet3 = "/icssg1-ethernet/ethernet-ports/port@0";
+		ethernet4 = "/icssg1-ethernet/ethernet-ports/port@1";
+	};
+
+	icssg1-ethernet {
+		compatible = "ti,am642-icssg-prueth";
+		pinctrl-names = "default";
+		pinctrl-0 = <&icssg1_rgmii1_pins_default>, <&icssg1_rgmii2_pins_default>;
+
+		dmas = <&main_pktdma 0xc200 15>, /* egress slice 0 */
+				<&main_pktdma 0xc201 15>, /* egress slice 0 */
+				<&main_pktdma 0xc202 15>, /* egress slice 0 */
+				<&main_pktdma 0xc203 15>, /* egress slice 0 */
+				<&main_pktdma 0xc204 15>, /* egress slice 1 */
+				<&main_pktdma 0xc205 15>, /* egress slice 1 */
+				<&main_pktdma 0xc206 15>, /* egress slice 1 */
+				<&main_pktdma 0xc207 15>, /* egress slice 1 */
+				<&main_pktdma 0x4200 15>, /* ingress slice 0 */
+				<&main_pktdma 0x4201 15>, /* ingress slice 1 */
+				<&main_pktdma 0x4202 0>, /* mgmnt rsp slice 0 */
+				<&main_pktdma 0x4203 0>; /* mgmnt rsp slice 1 */
+		dma-names = "tx0-0", "tx0-1", "tx0-2", "tx0-3",
+					"tx1-0", "tx1-1", "tx1-2", "tx1-3",
+					"rx0", "rx1",
+					"rxmgm0", "rxmgm1";
+
+		firmware-name = "ti-pruss/am65x-sr2-pru0-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-rtu0-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-txpru0-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-pru1-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-rtu1-prueth-fw.elf",
+				"ti-pruss/am65x-sr2-txpru1-prueth-fw.elf";
+
+		interrupt-parent = <&icssg1_intc>;
+		interrupts = <24 0 2>, <25 1 3>;
+		interrupt-names = "tx_ts0", "tx_ts1";
+		sram = <&oc_sram>;
+
+		ti,iep = <&icssg1_iep0>, <&icssg1_iep1>;
+		ti,mii-g-rt = <&icssg1_mii_g_rt>;
+		ti,mii-rt = <&icssg1_mii_rt>;
+		ti,pa-stats = <&icssg1_pa_stats>;
+		ti,prus = <&pru1_0>, <&rtu1_0>, <&tx_pru1_0>, <&pru1_1>, <&rtu1_1>, <&tx_pru1_1>;
+		ti,pruss-gp-mux-sel = <2>,	/* MII mode */
+				      <2>,
+				      <2>,
+				      <2>,	/* MII mode */
+				      <2>,
+				      <2>;
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			icssg1_emac0: port@0 {
+				reg = <0>;
+				phy-handle = <&icssg1_phy1>;
+				phy-mode = "rgmii-id";
+				/* Filled in by bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+				ti,syscon-rgmii-delay = <&main_conf 0x4110>;
+			};
+
+			icssg1_emac1: port@1 {
+				reg = <1>;
+				phy-handle = <&icssg1_phy2>;
+				phy-mode = "rgmii-id";
+				/* Filled in by bootloader */
+				local-mac-address = [00 00 00 00 00 00];
+				ti,syscon-rgmii-delay = <&main_conf 0x4114>;
+			};
+		};
+	};
+};
+
+&main_pmx0 {
+	icssg1_mdio_pins_default: icssg1-mdio-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x015c, PIN_OUTPUT, 0) /* (Y6) PRG1_MDIO0_MDC */
+			AM64X_IOPAD(0x0158, PIN_INPUT, 0)  /* (AA6) PRG1_MDIO0_MDIO */
+		>;
+	};
+
+	icssg1_rgmii1_pins_default: icssg1-rgmii1-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x00b8, PIN_INPUT, 2) /* (Y7) PRG1_PRU0_GPO0.PRG1_RGMII1_RD0 */
+			AM64X_IOPAD(0x00bc, PIN_INPUT, 2) /* (U8) PRG1_PRU0_GPO1.PRG1_RGMII1_RD1 */
+			AM64X_IOPAD(0x00c0, PIN_INPUT, 2) /* (W8) PRG1_PRU0_GPO2.PRG1_RGMII1_RD2 */
+			AM64X_IOPAD(0x00c4, PIN_INPUT, 2) /* (V8) PRG1_PRU0_GPO3.PRG1_RGMII1_RD3 */
+			AM64X_IOPAD(0x00d0, PIN_INPUT, 2) /* (AA7) PRG1_PRU0_GPO6.PRG1_RGMII1_RXC */
+			AM64X_IOPAD(0x00c8, PIN_INPUT, 2) /* (Y8) PRG1_PRU0_GPO4.PRG1_RGMII1_RX_CTL */
+			AM64X_IOPAD(0x00e4, PIN_OUTPUT, 2) /* (AA8) PRG1_PRU0_GPO11.PRG1_RGMII1_TD0 */
+			AM64X_IOPAD(0x00e8, PIN_OUTPUT, 2) /* (U9) PRG1_PRU0_GPO12.PRG1_RGMII1_TD1 */
+			AM64X_IOPAD(0x00ec, PIN_OUTPUT, 2) /* (W9) PRG1_PRU0_GPO13.PRG1_RGMII1_TD2 */
+			AM64X_IOPAD(0x00f0, PIN_OUTPUT, 2) /* (AA9) PRG1_PRU0_GPO14.PRG1_RGMII1_TD3 */
+			AM64X_IOPAD(0x00f4, PIN_OUTPUT, 2) /* (Y9) PRG1_PRU0_GPO15.PRG1_RGMII1_TX_CTL */
+			AM64X_IOPAD(0x00f8, PIN_INPUT, 2) /* (V9) PRG1_PRU0_GPO16.PRG1_RGMII1_TXC */
+		>;
+	};
+
+	icssg1_rgmii2_pins_default: icssg1-rgmii2-default-pins {
+		pinctrl-single,pins = <
+			AM64X_IOPAD(0x0108, PIN_INPUT, 2) /* (W11) PRG1_PRU1_GPO0.PRG1_RGMII2_RD0 */
+			AM64X_IOPAD(0x010c, PIN_INPUT, 2) /* (V11) PRG1_PRU1_GPO1.PRG1_RGMII2_RD1 */
+			AM64X_IOPAD(0x0110, PIN_INPUT, 2) /* (AA12) PRG1_PRU1_GPO2.PRG1_RGMII2_RD2 */
+			AM64X_IOPAD(0x0114, PIN_INPUT, 2) /* (Y12) PRG1_PRU1_GPO3.PRG1_RGMII2_RD3 */
+			AM64X_IOPAD(0x0118, PIN_INPUT, 2) /* (W12) PRG1_PRU1_GPO4.PRG1_RGMII2_RX_CTL */
+			AM64X_IOPAD(0x0120, PIN_INPUT, 2) /* (U11) PRG1_PRU1_GPO6.PRG1_RGMII2_RXC */
+			AM64X_IOPAD(0x0134, PIN_OUTPUT, 2) /* (AA10) PRG1_PRU1_GPO11.PRG1_RGMII2_TD0 */
+			AM64X_IOPAD(0x0138, PIN_OUTPUT, 2) /* (V10) PRG1_PRU1_GPO12.PRG1_RGMII2_TD1 */
+			AM64X_IOPAD(0x013c, PIN_OUTPUT, 2) /* (U10) PRG1_PRU1_GPO13.PRG1_RGMII2_TD2 */
+			AM64X_IOPAD(0x0140, PIN_OUTPUT, 2) /* (AA11) PRG1_PRU1_GPO14.PRG1_RGMII2_TD3 */
+			AM64X_IOPAD(0x0144, PIN_OUTPUT, 2) /* (Y11) PRG1_PRU1_GPO15.PRG1_RGMII2_TX_CTL */
+			AM64X_IOPAD(0x0148, PIN_INPUT, 2) /* (Y10) PRG1_PRU1_GPO16.PRG1_RGMII2_TXC */
+		>;
+	};
+};
+
+&icssg1_mdio {
+	pinctrl-names = "default";
+	pinctrl-0 = <&icssg1_mdio_pins_default>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	icssg1_phy1: ethernet-phy@1 {
+		reg = <0x1>;
+		rx-fifo-depth = <DP83869_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		tx-fifo-depth = <DP83869_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		rx-internal-delay-ps = <2000>;
+		tx-internal-delay-ps = <2000>;
+		ti,clk-output-sel = <DP83869_CLK_O_SEL_REF_CLK>;
+		ti,min-output-impedance;
+	};
+
+	icssg1_phy2: ethernet-phy@2 {
+		reg = <0x2>;
+		rx-fifo-depth = <DP83869_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		tx-fifo-depth = <DP83869_PHYCR_FIFO_DEPTH_4_B_NIB>;
+		rx-internal-delay-ps = <2000>;
+		tx-internal-delay-ps = <2000>;
+		ti,clk-output-sel = <DP83869_CLK_O_SEL_REF_CLK>;
+		ti,min-output-impedance;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
index 129524eb5b91..e4afa8c0a8ca 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
@@ -100,6 +100,7 @@
 		ti,mii-g-rt = <&icssg0_mii_g_rt>;
 		ti,mii-rt = <&icssg0_mii_rt>;
 		ti,iep = <&icssg0_iep0>, <&icssg0_iep1>;
+		ti,pa-stats = <&icssg0_pa_stats>;
 
 		ethernet-ports {
 			#address-cells = <1>;
diff --git a/arch/arm64/boot/dts/ti/k3-am642-sk.dts b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
index 1deaa0be0085..1fb1b91a1bad 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-sk.dts
@@ -40,7 +40,7 @@
 		reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
 	};
 
-	reserved-memory {
+	reserved_memory: reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -51,71 +51,17 @@
 			no-map;
 		};
 
-		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+		main_r5fss0_core0_dma_memory_region: memory@a0000000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0000000 0x00 0x100000>;
 			no-map;
 		};
 
-		main_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+		main_r5fss0_core0_memory_region: memory@a0100000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0100000 0x00 0xf00000>;
 			no-map;
 		};
-
-		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_memory_region: r5f-memory@a1100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_memory_region: r5f-memory@a2100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_memory_region: r5f-memory@a3100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		mcu_m4fss_dma_memory_region: m4f-dma-memory@a4000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4000000 0x00 0x100000>;
-			no-map;
-		};
-
-		mcu_m4fss_memory_region: m4f-memory@a4100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		rtos_ipc_memory_region: ipc-memories@a5000000 {
-			reg = <0x00 0xa5000000 0x00 0x00800000>;
-			alignment = <0x1000>;
-			no-map;
-		};
 	};
 
 	vusb_main: regulator-0 {
@@ -642,94 +588,6 @@
 	};
 };
 
-&mailbox0_cluster2 {
-	status = "okay";
-
-	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
-		ti,mbox-rx = <0 0 2>;
-		ti,mbox-tx = <1 0 2>;
-	};
-
-	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
-		ti,mbox-rx = <2 0 2>;
-		ti,mbox-tx = <3 0 2>;
-	};
-};
-
-&mailbox0_cluster4 {
-	status = "okay";
-
-	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
-		ti,mbox-rx = <0 0 2>;
-		ti,mbox-tx = <1 0 2>;
-	};
-
-	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
-		ti,mbox-rx = <2 0 2>;
-		ti,mbox-tx = <3 0 2>;
-	};
-};
-
-&mailbox0_cluster6 {
-	status = "okay";
-
-	mbox_m4_0: mbox-m4-0 {
-		ti,mbox-rx = <0 0 2>;
-		ti,mbox-tx = <1 0 2>;
-	};
-};
-
-&main_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>;
-	memory-region = <&main_r5fss0_core0_dma_memory_region>,
-			<&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>;
-	memory-region = <&main_r5fss0_core1_dma_memory_region>,
-			<&main_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss1_core0 {
-	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>;
-	memory-region = <&main_r5fss1_core0_dma_memory_region>,
-			<&main_r5fss1_core0_memory_region>;
-};
-
-&main_r5fss1_core1 {
-	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>;
-	memory-region = <&main_r5fss1_core1_dma_memory_region>,
-			<&main_r5fss1_core1_memory_region>;
-};
-
-&mcu_m4fss {
-	mboxes = <&mailbox0_cluster6 &mbox_m4_0>;
-	memory-region = <&mcu_m4fss_dma_memory_region>,
-			<&mcu_m4fss_memory_region>;
-	status = "okay";
-};
-
-/* main_timer8 is used by r5f0-0 */
-&main_timer8 {
-	status = "reserved";
-};
-
-/* main_timer9 is used by r5f0-1 */
-&main_timer9 {
-	status = "reserved";
-};
-
-/* main_timer10 is used by r5f1-0 */
-&main_timer10 {
-	status = "reserved";
-};
-
-/* main_timer11 is used by r5f1-1 */
-&main_timer11 {
-	status = "reserved";
-};
-
 &ecap0 {
 	status = "okay";
 	/* PWM is available on Pin 1 of header J3 */
@@ -743,3 +601,5 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_eqep0_pins_default>;
 };
+
+#include "k3-am64-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi b/arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi
index a5cec9a07510..fcbcc04521b8 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am642-sr-som.dtsi
@@ -105,7 +105,7 @@
 		device_type = "memory";
 	};
 
-	reserved-memory {
+	reserved_memory: reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -115,53 +115,17 @@
 			no-map;
 		};
 
-		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+		main_r5fss0_core0_dma_memory_region: memory@a0000000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0000000 0x00 0x100000>;
 			no-map;
 		};
 
-		main_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+		main_r5fss0_core0_memory_region: memory@a0100000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0100000 0x00 0xf00000>;
 			no-map;
 		};
-
-		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_memory_region: r5f-memory@a1100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_memory_region: r5f-memory@a2100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_memory_region: r5f-memory@a3100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3100000 0x00 0xf00000>;
-			no-map;
-		};
 	};
 
 	vdd_mmc0: regulator-vdd-mmc0 {
@@ -263,34 +227,6 @@
 	};
 };
 
-&mailbox0_cluster2 {
-	status = "okay";
-
-	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
-		ti,mbox-rx = <0 0 2>;
-		ti,mbox-tx = <1 0 2>;
-	};
-
-	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
-		ti,mbox-rx = <2 0 2>;
-		ti,mbox-tx = <3 0 2>;
-	};
-};
-
-&mailbox0_cluster4 {
-	status = "okay";
-
-	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
-		ti,mbox-rx = <0 0 2>;
-		ti,mbox-tx = <1 0 2>;
-	};
-
-	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
-		ti,mbox-rx = <2 0 2>;
-		ti,mbox-tx = <3 0 2>;
-	};
-};
-
 &main_i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_default_pins>;
@@ -488,30 +424,6 @@
 	};
 };
 
-&main_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>;
-	memory-region = <&main_r5fss0_core0_dma_memory_region>,
-			<&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>;
-	memory-region = <&main_r5fss0_core1_dma_memory_region>,
-			<&main_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss1_core0 {
-	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>;
-	memory-region = <&main_r5fss1_core0_dma_memory_region>,
-			<&main_r5fss1_core0_memory_region>;
-};
-
-&main_r5fss1_core1 {
-	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>;
-	memory-region = <&main_r5fss1_core1_dma_memory_region>,
-			<&main_r5fss1_core1_memory_region>;
-};
-
 /* SoC default UART console */
 &main_uart0 {
 	pinctrl-names = "default";
@@ -590,3 +502,5 @@
 	ti,vbus-divider;
 	ti,usb2-only;
 };
+
+#include "k3-am64-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi
index 828d815d6bdf..ff3b2e0b8dd4 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am642-tqma64xxl.dtsi
@@ -20,7 +20,7 @@
 
 	};
 
-	reserved-memory {
+	reserved_memory: reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -31,59 +31,17 @@
 			no-map;
 		};
 
-		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+		main_r5fss0_core0_dma_memory_region: memory@a0000000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0000000 0x00 0x100000>;
 			no-map;
 		};
 
-		main_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+		main_r5fss0_core0_memory_region: memory@a0100000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0100000 0x00 0xf00000>;
 			no-map;
 		};
-
-		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_memory_region: r5f-memory@a1100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a2000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_memory_region: r5f-memory@a2100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a3000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_memory_region: r5f-memory@a3100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		rtos_ipc_memory_region: ipc-memories@a5000000 {
-			reg = <0x00 0xa5000000 0x00 0x00800000>;
-			alignment = <0x1000>;
-			no-map;
-		};
 	};
 
 	reg_1v8: regulator-1v8 {
@@ -130,67 +88,6 @@
 	};
 };
 
-&mailbox0_cluster2 {
-	status = "okay";
-
-	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
-		ti,mbox-rx = <0 0 2>;
-		ti,mbox-tx = <1 0 2>;
-	};
-
-	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
-		ti,mbox-rx = <2 0 2>;
-		ti,mbox-tx = <3 0 2>;
-	};
-};
-
-&mailbox0_cluster4 {
-	status = "okay";
-
-	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
-		ti,mbox-rx = <0 0 2>;
-		ti,mbox-tx = <1 0 2>;
-	};
-
-	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
-		ti,mbox-rx = <2 0 2>;
-		ti,mbox-tx = <3 0 2>;
-	};
-};
-
-&mailbox0_cluster6 {
-	status = "okay";
-
-	mbox_m4_0: mbox-m4-0 {
-		ti,mbox-rx = <0 0 2>;
-		ti,mbox-tx = <1 0 2>;
-	};
-};
-
-&main_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core0>;
-	memory-region = <&main_r5fss0_core0_dma_memory_region>,
-			<&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss0_core1>;
-	memory-region = <&main_r5fss0_core1_dma_memory_region>,
-			<&main_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss1_core0 {
-	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core0>;
-	memory-region = <&main_r5fss1_core0_dma_memory_region>,
-			<&main_r5fss1_core0_memory_region>;
-};
-
-&main_r5fss1_core1 {
-	mboxes = <&mailbox0_cluster4 &mbox_main_r5fss1_core1>;
-	memory-region = <&main_r5fss1_core1_dma_memory_region>,
-			<&main_r5fss1_core1_memory_region>;
-};
-
 &ospi0 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -264,3 +161,5 @@
 		>;
 	};
 };
+
+#include "k3-am64-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
index e5136ed94765..42ba3dab2fc1 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-iot2050-common.dtsi
@@ -36,7 +36,7 @@
 		stdout-path = "serial3:115200n8";
 	};
 
-	reserved-memory {
+	reserved_memory: reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -47,36 +47,18 @@
 			no-map;
 		};
 
-		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+		mcu_r5fss0_core0_dma_memory_region: memory@a0000000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0xa0000000 0 0x100000>;
 			no-map;
 		};
 
-		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+		mcu_r5fss0_core0_memory_region: memory@a0100000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0xa0100000 0 0xf00000>;
 			no-map;
 		};
 
-		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
-			compatible = "shared-dma-pool";
-			reg = <0 0xa1000000 0 0x100000>;
-			no-map;
-		};
-
-		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
-			compatible = "shared-dma-pool";
-			reg = <0 0xa1100000 0 0xf00000>;
-			no-map;
-		};
-
-		rtos_ipc_memory_region: ipc-memories@a2000000 {
-			reg = <0x00 0xa2000000 0x00 0x00200000>;
-			alignment = <0x1000>;
-			no-map;
-		};
-
 		/* To reserve the power-on(PON) reason for watchdog reset */
 		wdt_reset_memory_region: wdt-memory@a2200000 {
 			reg = <0x00 0xa2200000 0x00 0x1000>;
@@ -582,38 +564,6 @@
 	reset-gpios = <&wkup_gpio0 27 GPIO_ACTIVE_HIGH>;
 };
 
-&mailbox0_cluster0 {
-	status = "okay";
-	interrupts = <436>;
-
-	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
-		ti,mbox-tx = <1 0 0>;
-		ti,mbox-rx = <0 0 0>;
-	};
-};
-
-&mailbox0_cluster1 {
-	status = "okay";
-	interrupts = <432>;
-
-	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
-		ti,mbox-tx = <1 0 0>;
-		ti,mbox-rx = <0 0 0>;
-	};
-};
-
-&mcu_r5fss0_core0 {
-	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
-			<&mcu_r5fss0_core0_memory_region>;
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
-};
-
-&mcu_r5fss0_core1 {
-	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
-			<&mcu_r5fss0_core1_memory_region>;
-	mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>;
-};
-
 &mcu_rti1 {
 	memory-region = <&wdt_reset_memory_region>;
 };
@@ -686,3 +636,9 @@
 	/* lock-step mode not supported on iot2050 boards */
 	ti,cluster-mode = <0>;
 };
+
+#include "k3-am65-ti-ipc-firmware.dtsi"
+
+&rtos_ipc_memory_region {
+	reg = <0x00 0xa2000000 0x00 0x00200000>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
index 7cf1f646500a..f6d9a5779918 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
@@ -408,6 +408,7 @@
 		ranges = <0x41000000 0x00 0x41000000 0x20000>,
 			 <0x41400000 0x00 0x41400000 0x20000>;
 		power-domains = <&k3_pds 129 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 
 		mcu_r5fss0_core0: r5f@41000000 {
 			compatible = "ti,am654-r5f";
@@ -422,6 +423,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 
 		mcu_r5fss0_core1: r5f@41400000 {
@@ -437,6 +439,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/ti/k3-am65-ti-ipc-firmware.dtsi b/arch/arm64/boot/dts/ti/k3-am65-ti-ipc-firmware.dtsi
new file mode 100644
index 000000000000..61ab0357fc0d
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-am65-ti-ipc-firmware.dtsi
@@ -0,0 +1,64 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * Device Tree Source for enabling IPC using TI SDK firmware on AM65 SoCs
+ *
+ * Copyright (C) 2016-2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&reserved_memory {
+	mcu_r5fss0_core1_dma_memory_region: memory@a1000000 {
+		compatible = "shared-dma-pool";
+		reg = <0 0xa1000000 0 0x100000>;
+		no-map;
+	};
+
+	mcu_r5fss0_core1_memory_region: memory@a1100000 {
+		compatible = "shared-dma-pool";
+		reg = <0 0xa1100000 0 0xf00000>;
+		no-map;
+	};
+
+	rtos_ipc_memory_region: memory@a2000000 {
+		reg = <0x00 0xa2000000 0x00 0x00100000>;
+		alignment = <0x1000>;
+		no-map;
+	};
+};
+
+&mailbox0_cluster0 {
+	status = "okay";
+	interrupts = <436>;
+
+	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+		ti,mbox-tx = <1 0 0>;
+		ti,mbox-rx = <0 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+	interrupts = <432>;
+
+	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+		ti,mbox-tx = <1 0 0>;
+		ti,mbox-rx = <0 0 0>;
+	};
+};
+
+&mcu_r5fss0 {
+	status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
+	status = "okay";
+};
+
+&mcu_r5fss0_core1 {
+	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+			<&mcu_r5fss0_core1_memory_region>;
+	mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index e589690c7c82..0c42c486d83a 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -39,7 +39,7 @@
 		      <0x00000008 0x80000000 0x00000000 0x80000000>;
 	};
 
-	reserved-memory {
+	reserved_memory: reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
 		ranges;
@@ -50,35 +50,17 @@
 			no-map;
 		};
 
-		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+		mcu_r5fss0_core0_dma_memory_region: memory@a0000000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0xa0000000 0 0x100000>;
 			no-map;
 		};
 
-		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+		mcu_r5fss0_core0_memory_region: memory@a0100000 {
 			compatible = "shared-dma-pool";
 			reg = <0 0xa0100000 0 0xf00000>;
 			no-map;
 		};
-
-		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
-			compatible = "shared-dma-pool";
-			reg = <0 0xa1000000 0 0x100000>;
-			no-map;
-		};
-
-		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
-			compatible = "shared-dma-pool";
-			reg = <0 0xa1100000 0 0xf00000>;
-			no-map;
-		};
-
-		rtos_ipc_memory_region: ipc-memories@a2000000 {
-			reg = <0x00 0xa2000000 0x00 0x00100000>;
-			alignment = <0x1000>;
-			no-map;
-		};
 	};
 
 	gpio-keys {
@@ -521,38 +503,6 @@
 	status = "disabled";
 };
 
-&mailbox0_cluster0 {
-	status = "okay";
-	interrupts = <436>;
-
-	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
-		ti,mbox-tx = <1 0 0>;
-		ti,mbox-rx = <0 0 0>;
-	};
-};
-
-&mailbox0_cluster1 {
-	status = "okay";
-	interrupts = <432>;
-
-	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
-		ti,mbox-tx = <1 0 0>;
-		ti,mbox-rx = <0 0 0>;
-	};
-};
-
-&mcu_r5fss0_core0 {
-	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
-			<&mcu_r5fss0_core0_memory_region>;
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
-};
-
-&mcu_r5fss0_core1 {
-	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
-			<&mcu_r5fss0_core1_memory_region>;
-	mboxes = <&mailbox0_cluster1 &mbox_mcu_r5fss0_core1>;
-};
-
 &ospi0 {
 	status = "okay";
 	pinctrl-names = "default";
@@ -647,3 +597,5 @@
 &wkup_gpio0 {
 	bootph-all;
 };
+
+#include "k3-am65-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-sm.dts b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-sm.dts
index b829f4bcab69..adf4da7dfa2d 100644
--- a/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-sm.dts
+++ b/arch/arm64/boot/dts/ti/k3-am6548-iot2050-advanced-sm.dts
@@ -145,7 +145,7 @@
 	pinctrl-0 = <&main_spi0_pins>;
 
 	#address-cells = <1>;
-	#size-cells= <0>;
+	#size-cells = <0>;
 };
 
 &mcu_spi0 {
diff --git a/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts b/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts
index bf9b23df1da2..b697035df04e 100644
--- a/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts
+++ b/arch/arm64/boot/dts/ti/k3-am67a-beagley-ai.dts
@@ -50,71 +50,17 @@
 			no-map;
 		};
 
-		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+		wkup_r5fss0_core0_dma_memory_region: memory@a0000000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0000000 0x00 0x100000>;
 			no-map;
 		};
 
-		wkup_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+		wkup_r5fss0_core0_memory_region: memory@a0100000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0100000 0x00 0xf00000>;
 			no-map;
 		};
-
-		mcu_r5fss0_core0_dma_memory_region: mcu-r5fss-dma-memory-region@a1000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1000000 0x00 0x100000>;
-			no-map;
-		};
-
-		mcu_r5fss0_core0_memory_region: mcu-r5fss-memory-region@a1100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_dma_memory_region: main-r5fss-dma-memory-region@a2000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_memory_region: main-r5fss-memory-region@a2100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c7x_0_dma_memory_region: c7x-dma-memory@a3000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c7x_0_memory_region: c7x-memory@a3100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c7x_1_dma_memory_region: c7x-dma-memory@a4000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c7x_1_memory_region: c7x-memory@a4100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		rtos_ipc_memory_region: ipc-memories@a5000000 {
-			reg = <0x00 0xa5000000 0x00 0x1c00000>;
-			alignment = <0x1000>;
-			no-map;
-		};
 	};
 
 	vsys_5v0: regulator-1 {
@@ -453,100 +399,4 @@
 	status = "okay";
 };
 
-&mailbox0_cluster0 {
-	status = "okay";
-
-	mbox_wkup_r5_0: mbox-wkup-r5-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-};
-
-&mailbox0_cluster1 {
-	status = "okay";
-
-	mbox_mcu_r5_0: mbox-mcu-r5-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-};
-
-&mailbox0_cluster2 {
-	status = "okay";
-
-	mbox_c7x_0: mbox-c7x-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-};
-
-&mailbox0_cluster3 {
-	status = "okay";
-
-	mbox_main_r5_0: mbox-main-r5-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_c7x_1: mbox-c7x-1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-/* Timers are used by Remoteproc firmware */
-&main_timer0 {
-	status = "reserved";
-};
-
-&main_timer1 {
-	status = "reserved";
-};
-
-&main_timer2 {
-	status = "reserved";
-};
-
-&wkup_r5fss0 {
-	status = "okay";
-};
-
-&wkup_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster0 &mbox_wkup_r5_0>;
-	memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
-			<&wkup_r5fss0_core0_memory_region>;
-};
-
-&mcu_r5fss0 {
-	status = "okay";
-};
-
-&mcu_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster1 &mbox_mcu_r5_0>;
-	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
-			<&mcu_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0 {
-	status = "okay";
-};
-
-&main_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster3 &mbox_main_r5_0>;
-	memory-region = <&main_r5fss0_core0_dma_memory_region>,
-			<&main_r5fss0_core0_memory_region>;
-};
-
-&c7x_0 {
-	mboxes = <&mailbox0_cluster2 &mbox_c7x_0>;
-	memory-region = <&c7x_0_dma_memory_region>,
-			<&c7x_0_memory_region>;
-	status = "okay";
-};
-
-&c7x_1 {
-	mboxes = <&mailbox0_cluster3 &mbox_c7x_1>;
-	memory-region = <&c7x_1_dma_memory_region>,
-			<&c7x_1_memory_region>;
-	status = "okay";
-};
+#include "k3-j722s-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi
index fd715fee8170..adef02bd8040 100644
--- a/arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am68-phycore-som.dtsi
@@ -49,107 +49,17 @@
 			no-map;
 		};
 
-		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+		mcu_r5fss0_core0_dma_memory_region: memory@a0000000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0000000 0x00 0x100000>;
 			no-map;
 		};
 
-		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+		mcu_r5fss0_core0_memory_region: memory@a0100000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0100000 0x00 0xf00000>;
 			no-map;
 		};
-
-		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1000000 0x00 0x100000>;
-			no-map;
-		};
-
-		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa5000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa5100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c71_0_dma_memory_region: c71-dma-memory@a6000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa6000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c71_0_memory_region: c71-memory@a6100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa6100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c71_1_dma_memory_region: c71-dma-memory@a7000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa7000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c71_1_memory_region: c71-memory@a7100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa7100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		rtos_ipc_memory_region: ipc-memories@a8000000 {
-			reg = <0x00 0xa8000000 0x00 0x01c00000>;
-			alignment = <0x1000>;
-			no-map;
-		};
 	};
 
 	vdd_sd_dv: regulator-sd {
@@ -243,80 +153,6 @@
 	};
 };
 
-&c71_0 {
-	mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
-	memory-region = <&c71_0_dma_memory_region>,
-			<&c71_0_memory_region>;
-	status = "okay";
-};
-
-&c71_1 {
-	mboxes = <&mailbox0_cluster4 &mbox_c71_1>;
-	memory-region = <&c71_1_dma_memory_region>,
-			<&c71_1_memory_region>;
-	status = "okay";
-};
-
-&mailbox0_cluster0 {
-	interrupts = <436>;
-	status = "okay";
-
-	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster1 {
-	interrupts = <432>;
-	status = "okay";
-
-	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster2 {
-	interrupts = <428>;
-	status = "okay";
-
-	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster4 {
-	interrupts = <420>;
-	status = "okay";
-
-	mbox_c71_0: mbox-c71-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_c71_1: mbox-c71-1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
 &main_cpsw {
 	pinctrl-names = "default";
 	pinctrl-0 = <&rgmii1_pins_default>;
@@ -367,30 +203,6 @@
 	status = "okay";
 };
 
-&main_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
-	memory-region = <&main_r5fss0_core0_dma_memory_region>,
-			<&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
-	memory-region = <&main_r5fss0_core1_dma_memory_region>,
-			<&main_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss1_core0 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
-	memory-region = <&main_r5fss1_core0_dma_memory_region>,
-			<&main_r5fss1_core0_memory_region>;
-};
-
-&main_r5fss1_core1 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
-	memory-region = <&main_r5fss1_core1_dma_memory_region>,
-			<&main_r5fss1_core1_memory_region>;
-};
-
 /* eMMC */
 &main_sdhci0 {
 	non-removable;
@@ -405,51 +217,6 @@
 	bootph-all;
 };
 
-&main_r5fss0 {
-	ti,cluster-mode = <0>;
-};
-
-&main_r5fss1 {
-	ti,cluster-mode = <0>;
-};
-
-/* Timers are used by Remoteproc firmware */
-&main_timer0 {
-	status = "reserved";
-};
-
-&main_timer1 {
-	status = "reserved";
-};
-
-&main_timer2 {
-	status = "reserved";
-};
-
-&main_timer3 {
-	status = "reserved";
-};
-
-&main_timer4 {
-	status = "reserved";
-};
-
-&main_timer5 {
-	status = "reserved";
-};
-
-&mcu_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
-	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
-			<&mcu_r5fss0_core0_memory_region>;
-};
-
-&mcu_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
-	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
-			<&mcu_r5fss0_core1_memory_region>;
-};
-
 &ospi0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&mcu_fss0_ospi0_pins_default>;
@@ -599,3 +366,5 @@
 		pagesize = <32>;
 	};
 };
+
+#include "k3-j721s2-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
index e84c504c87d2..75a107456ce1 100644
--- a/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
@@ -135,6 +135,34 @@
 		max-bitrate = <5000000>;
 	};
 
+	edp0_refclk: clock-edp0-refclk {
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+		#clock-cells = <0>;
+	};
+
+	dp0_pwr_3v3: regulator-dp0-pwr {
+		compatible = "regulator-fixed";
+		regulator-name = "dp0-pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&exp2 2 GPIO_ACTIVE_HIGH>;     /*P0 - DP0_3V3 _EN */
+		enable-active-high;
+	};
+
+	dp0: dp0-connector {
+		compatible = "dp-connector";
+		label = "DP0";
+		type = "full-size";
+		dp-pwr-supply = <&dp0_pwr_3v3>;
+
+		port {
+			dp0_connector_in: endpoint {
+				remote-endpoint = <&dp0_out>;
+			};
+		};
+	};
+
 	connector-hdmi {
 		compatible = "hdmi-connector";
 		label = "hdmi";
@@ -615,6 +643,39 @@
 		gpio-line-names = "HDMI_PDn","HDMI_LS_OE",
 				  "DP0_3V3_EN","eDP_ENABLE";
 	};
+
+	bridge_dsi_edp: bridge-dsi-edp@2c {
+		compatible = "ti,sn65dsi86";
+		reg = <0x2c>;
+		clock-names = "refclk";
+		clocks = <&edp0_refclk>;
+		enable-gpios = <&exp2 3 GPIO_ACTIVE_HIGH>;
+		vpll-supply = <&vsys_io_1v8>;
+		vccio-supply = <&vsys_io_1v8>;
+		vcca-supply = <&vsys_io_1v2>;
+		vcc-supply = <&vsys_io_1v2>;
+
+		dsi_edp_bridge_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				dp0_in: endpoint {
+					remote-endpoint = <&dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				dp0_out: endpoint {
+					remote-endpoint = <&dp0_connector_in>;
+				};
+			};
+		};
+	};
 };
 
 &main_sdhci1 {
@@ -711,6 +772,15 @@
 			remote-endpoint = <&tfp410_in>;
 		};
 	};
+
+	/* DSI */
+	port@2 {
+		reg = <2>;
+
+		dpi0_out: endpoint {
+			remote-endpoint = <&dsi0_in>;
+		};
+	};
 };
 
 &serdes_ln_ctrl {
@@ -768,3 +838,30 @@
 	phys = <&serdes0_usb_link>;
 	phy-names = "cdns3,usb3-phy";
 };
+
+&dphy_tx0 {
+	status = "okay";
+};
+
+&dsi0 {
+	status = "okay";
+};
+
+&dsi0_ports {
+
+	port@0 {
+		reg = <0>;
+
+		dsi0_out: endpoint {
+			remote-endpoint = <&dp0_in>;
+		};
+	};
+
+	port@1 {
+		reg = <1>;
+
+		dsi0_in: endpoint {
+			remote-endpoint = <&dpi0_out>;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi b/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi
index 4ca2d4e2fb9b..6a6dc816b658 100644
--- a/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi
@@ -27,107 +27,17 @@
 			no-map;
 		};
 
-		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+		mcu_r5fss0_core0_dma_memory_region: memory@a0000000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0000000 0x00 0x100000>;
 			no-map;
 		};
 
-		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+		mcu_r5fss0_core0_memory_region: memory@a0100000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0100000 0x00 0xf00000>;
 			no-map;
 		};
-
-		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1000000 0x00 0x100000>;
-			no-map;
-		};
-
-		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa5000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa5100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c71_0_dma_memory_region: c71-dma-memory@a6000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa6000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c71_0_memory_region: c71-memory@a6100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa6100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c71_1_dma_memory_region: c71-dma-memory@a7000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa7000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c71_1_memory_region: c71-memory@a7100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa7100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		rtos_ipc_memory_region: ipc-memories@a8000000 {
-			reg = <0x00 0xa8000000 0x00 0x01c00000>;
-			alignment = <0x1000>;
-			no-map;
-		};
 	};
 };
 
@@ -235,141 +145,4 @@
 	};
 };
 
-&mailbox0_cluster0 {
-	status = "okay";
-	interrupts = <436>;
-	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster1 {
-	status = "okay";
-	interrupts = <432>;
-	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster2 {
-	status = "okay";
-	interrupts = <428>;
-	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster4 {
-	status = "okay";
-	interrupts = <420>;
-	mbox_c71_0: mbox-c71-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_c71_1: mbox-c71-1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mcu_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
-	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
-			<&mcu_r5fss0_core0_memory_region>;
-};
-
-&mcu_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
-	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
-			<&mcu_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss0 {
-	ti,cluster-mode = <0>;
-};
-
-&main_r5fss1 {
-	ti,cluster-mode = <0>;
-};
-
-/* Timers are used by Remoteproc firmware */
-&main_timer0 {
-	status = "reserved";
-};
-
-&main_timer1 {
-	status = "reserved";
-};
-
-&main_timer2 {
-	status = "reserved";
-};
-
-&main_timer3 {
-	status = "reserved";
-};
-
-&main_timer4 {
-	status = "reserved";
-};
-
-&main_timer5 {
-	status = "reserved";
-};
-
-&main_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
-	memory-region = <&main_r5fss0_core0_dma_memory_region>,
-			<&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
-	memory-region = <&main_r5fss0_core1_dma_memory_region>,
-			<&main_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss1_core0 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
-	memory-region = <&main_r5fss1_core0_dma_memory_region>,
-			<&main_r5fss1_core0_memory_region>;
-};
-
-&main_r5fss1_core1 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
-	memory-region = <&main_r5fss1_core1_dma_memory_region>,
-			<&main_r5fss1_core1_memory_region>;
-};
-
-&c71_0 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
-	memory-region = <&c71_0_dma_memory_region>,
-			<&c71_0_memory_region>;
-};
-
-&c71_1 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster4 &mbox_c71_1>;
-	memory-region = <&c71_1_dma_memory_region>,
-			<&c71_1_memory_region>;
-};
+#include "k3-j721s2-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-am69-sk.dts b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
index 612ac27643d2..5896e57b5b9e 100644
--- a/arch/arm64/boot/dts/ti/k3-am69-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am69-sk.dts
@@ -49,149 +49,17 @@
 			no-map;
 		};
 
-		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+		mcu_r5fss0_core0_dma_memory_region: memory@a0000000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0000000 0x00 0x100000>;
 			no-map;
 		};
 
-		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+		mcu_r5fss0_core0_memory_region: memory@a0100000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0100000 0x00 0xf00000>;
 			no-map;
 		};
-
-		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1000000 0x00 0x100000>;
-			no-map;
-		};
-
-		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa5000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa5100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss2_core0_dma_memory_region: r5f-dma-memory@a6000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa6000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss2_core0_memory_region: r5f-memory@a6100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa6100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss2_core1_dma_memory_region: r5f-dma-memory@a7000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa7000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss2_core1_memory_region: r5f-memory@a7100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa7100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c71_0_dma_memory_region: c71-dma-memory@a8000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa8000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c71_0_memory_region: c71-memory@a8100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa8100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c71_1_dma_memory_region: c71-dma-memory@a9000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa9000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c71_1_memory_region: c71-memory@a9100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa9100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c71_2_dma_memory_region: c71-dma-memory@aa000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xaa000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c71_2_memory_region: c71-memory@aa100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xaa100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c71_3_dma_memory_region: c71-dma-memory@ab000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xab000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c71_3_memory_region: c71-memory@ab100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xab100000 0x00 0xf00000>;
-			no-map;
-		};
 	};
 
 	vusb_main: regulator-vusb-main5v0 {
@@ -640,90 +508,6 @@
 	bootph-all;
 };
 
-&mailbox0_cluster0 {
-	status = "okay";
-	interrupts = <436>;
-	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster1 {
-	status = "okay";
-	interrupts = <432>;
-	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster2 {
-	status = "okay";
-	interrupts = <428>;
-	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster3 {
-	status = "okay";
-	interrupts = <424>;
-	mbox_main_r5fss2_core0: mbox-main-r5fss2-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_main_r5fss2_core1: mbox-main-r5fss2-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster4 {
-	status = "okay";
-	interrupts = <420>;
-	mbox_c71_0: mbox-c71-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_c71_1: mbox-c71-1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster5 {
-	status = "okay";
-	interrupts = <416>;
-	mbox_c71_2: mbox-c71-2 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_c71_3: mbox-c71-3 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
 &wkup_uart0 {
 	/* Firmware usage */
 	status = "reserved";
@@ -992,135 +776,6 @@
 	bootph-all;
 };
 
-&mcu_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
-	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
-			<&mcu_r5fss0_core0_memory_region>;
-};
-
-&mcu_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
-	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
-			<&mcu_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss0 {
-	ti,cluster-mode = <0>;
-};
-
-&main_r5fss1 {
-	ti,cluster-mode = <0>;
-};
-
-/* Timers are used by Remoteproc firmware */
-&main_timer0 {
-	status = "reserved";
-};
-
-&main_timer1 {
-	status = "reserved";
-};
-
-&main_timer2 {
-	status = "reserved";
-};
-
-&main_timer3 {
-	status = "reserved";
-};
-
-&main_timer4 {
-	status = "reserved";
-};
-
-&main_timer5 {
-	status = "reserved";
-};
-
-&main_timer6 {
-	status = "reserved";
-};
-
-&main_timer7 {
-	status = "reserved";
-};
-
-&main_timer8 {
-	status = "reserved";
-};
-
-&main_timer9 {
-	status = "reserved";
-};
-
-&main_r5fss2 {
-	ti,cluster-mode = <0>;
-};
-
-&main_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
-	memory-region = <&main_r5fss0_core0_dma_memory_region>,
-			<&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
-	memory-region = <&main_r5fss0_core1_dma_memory_region>,
-			<&main_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss1_core0 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
-	memory-region = <&main_r5fss1_core0_dma_memory_region>,
-			<&main_r5fss1_core0_memory_region>;
-};
-
-&main_r5fss1_core1 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
-	memory-region = <&main_r5fss1_core1_dma_memory_region>,
-			<&main_r5fss1_core1_memory_region>;
-};
-
-&main_r5fss2_core0 {
-	mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core0>;
-	memory-region = <&main_r5fss2_core0_dma_memory_region>,
-			<&main_r5fss2_core0_memory_region>;
-};
-
-&main_r5fss2_core1 {
-	mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core1>;
-	memory-region = <&main_r5fss2_core1_dma_memory_region>,
-			<&main_r5fss2_core1_memory_region>;
-};
-
-&c71_0 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
-	memory-region = <&c71_0_dma_memory_region>,
-			<&c71_0_memory_region>;
-};
-
-&c71_1 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster4 &mbox_c71_1>;
-	memory-region = <&c71_1_dma_memory_region>,
-			<&c71_1_memory_region>;
-};
-
-&c71_2 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster5 &mbox_c71_2>;
-	memory-region = <&c71_2_dma_memory_region>,
-			<&c71_2_memory_region>;
-};
-
-&c71_3 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster5 &mbox_c71_3>;
-	memory-region = <&c71_3_dma_memory_region>,
-			<&c71_3_memory_region>;
-};
-
 &wkup_gpio_intr {
 	status = "okay";
 };
@@ -1321,12 +976,20 @@
 &serdes0 {
 	status = "okay";
 
-	serdes0_pcie_link: phy@0 {
+	serdes0_pcie1_link: phy@0 {
 		reg = <0>;
-		cdns,num-lanes = <3>;
+		cdns,num-lanes = <2>;
 		#phy-cells = <0>;
 		cdns,phy-type = <PHY_TYPE_PCIE>;
-		resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>, <&serdes_wiz0 3>;
+		resets = <&serdes_wiz0 1>, <&serdes_wiz0 2>;
+	};
+
+	serdes0_pcie3_link: phy@2 {
+		reg = <2>;
+		cdns,num-lanes = <1>;
+		#phy-cells = <0>;
+		cdns,phy-type = <PHY_TYPE_PCIE>;
+		resets = <&serdes_wiz0 3>;
 	};
 
 	serdes0_usb_link: phy@3 {
@@ -1364,7 +1027,7 @@
 &pcie1_rc {
 	status = "okay";
 	reset-gpios = <&exp1 5 GPIO_ACTIVE_HIGH>;
-	phys = <&serdes0_pcie_link>;
+	phys = <&serdes0_pcie1_link>;
 	phy-names = "pcie-phy";
 	num-lanes = <2>;
 };
@@ -1372,7 +1035,7 @@
 &pcie3_rc {
 	status = "okay";
 	reset-gpios = <&exp1 6 GPIO_ACTIVE_HIGH>;
-	phys = <&serdes0_pcie_link>;
+	phys = <&serdes0_pcie3_link>;
 	phy-names = "pcie-phy";
 	num-lanes = <1>;
 };
@@ -1395,3 +1058,6 @@
 	phys = <&serdes0_usb_link>;
 	phy-names = "cdns3,usb3-phy";
 };
+
+#include "k3-j784s4-j742s2-ti-ipc-firmware-common.dtsi"
+#include "k3-j784s4-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 5ce5f0a3d6f5..628ff89dd72f 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -1516,6 +1516,7 @@
 		ranges = <0x5c00000 0x00 0x5c00000 0x20000>,
 			 <0x5d00000 0x00 0x5d00000 0x20000>;
 		power-domains = <&k3_pds 243 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 
 		main_r5fss0_core0: r5f@5c00000 {
 			compatible = "ti,j7200-r5f";
@@ -1530,6 +1531,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 
 		main_r5fss0_core1: r5f@5d00000 {
@@ -1545,6 +1547,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index 56ab144fea07..692c4745040e 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -612,6 +612,7 @@
 		ranges = <0x41000000 0x00 0x41000000 0x20000>,
 			 <0x41400000 0x00 0x41400000 0x20000>;
 		power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 
 		mcu_r5fss0_core0: r5f@41000000 {
 			compatible = "ti,j7200-r5f";
@@ -626,6 +627,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 
 		mcu_r5fss0_core1: r5f@41400000 {
@@ -641,6 +643,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
index 291ab9bb414d..5a8c2e707fde 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-som-p0.dtsi
@@ -29,59 +29,17 @@
 			no-map;
 		};
 
-		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+		mcu_r5fss0_core0_dma_memory_region: memory@a0000000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0000000 0x00 0x100000>;
 			no-map;
 		};
 
-		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+		mcu_r5fss0_core0_memory_region: memory@a0100000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0100000 0x00 0xf00000>;
 			no-map;
 		};
-
-		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1000000 0x00 0x100000>;
-			no-map;
-		};
-
-		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		rtos_ipc_memory_region: ipc-memories@a4000000 {
-			reg = <0x00 0xa4000000 0x00 0x00800000>;
-			alignment = <0x1000>;
-			no-map;
-		};
 	};
 
 	mux0: mux-controller-0 {
@@ -224,77 +182,6 @@
 	};
 };
 
-&mailbox0_cluster0 {
-	status = "okay";
-	interrupts = <436>;
-
-	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster1 {
-	status = "okay";
-	interrupts = <432>;
-
-	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mcu_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
-	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
-			<&mcu_r5fss0_core0_memory_region>;
-};
-
-&mcu_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
-	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
-			<&mcu_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss0 {
-	ti,cluster-mode = <0>;
-};
-
-/* Timers are used by Remoteproc firmware */
-&main_timer0 {
-	status = "reserved";
-};
-
-&main_timer1 {
-	status = "reserved";
-};
-
-&main_timer2 {
-	status = "reserved";
-};
-
-&main_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
-	memory-region = <&main_r5fss0_core0_dma_memory_region>,
-			<&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
-	memory-region = <&main_r5fss0_core1_dma_memory_region>,
-			<&main_r5fss0_core1_memory_region>;
-};
-
 &main_i2c0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_pins_default>;
@@ -537,3 +424,5 @@
 	pinctrl-names = "default";
 	phys = <&transceiver0>;
 };
+
+#include "k3-j7200-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-ti-ipc-firmware.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-ti-ipc-firmware.dtsi
new file mode 100644
index 000000000000..9477f1efbbc6
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j7200-ti-ipc-firmware.dtsi
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * Device Tree Source for enabling IPC using TI SDK firmware on J7200 SoCs
+ *
+ * Copyright (C) 2020-2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&reserved_memory {
+	mcu_r5fss0_core1_dma_memory_region: memory@a1000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa1000000 0x00 0x100000>;
+		no-map;
+	};
+
+	mcu_r5fss0_core1_memory_region: memory@a1100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa1100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	main_r5fss0_core0_dma_memory_region: memory@a2000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa2000000 0x00 0x100000>;
+		no-map;
+	};
+
+	main_r5fss0_core0_memory_region: memory@a2100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa2100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	main_r5fss0_core1_dma_memory_region: memory@a3000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa3000000 0x00 0x100000>;
+		no-map;
+	};
+
+	main_r5fss0_core1_memory_region: memory@a3100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa3100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	rtos_ipc_memory_region: memory@a4000000 {
+		reg = <0x00 0xa4000000 0x00 0x00800000>;
+		alignment = <0x1000>;
+		no-map;
+	};
+};
+
+&mailbox0_cluster0 {
+	status = "okay";
+	interrupts = <436>;
+
+	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+	interrupts = <432>;
+
+	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+/* Timers are used by Remoteproc firmware */
+&main_timer0 {
+	status = "reserved";
+};
+
+&main_timer1 {
+	status = "reserved";
+};
+
+&main_timer2 {
+	status = "reserved";
+};
+
+&mcu_r5fss0 {
+	status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+	status = "okay";
+};
+
+&mcu_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
+	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+			<&mcu_r5fss0_core1_memory_region>;
+	status = "okay";
+};
+
+&main_r5fss0 {
+	ti,cluster-mode = <0>;
+	status = "okay";
+};
+
+&main_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+	status = "okay";
+};
+
+&main_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
+	memory-region = <&main_r5fss0_core1_dma_memory_region>,
+			<&main_r5fss0_core1_memory_region>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
index fb899c99753e..352fb60e6ce8 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-beagleboneai64.dts
@@ -51,119 +51,17 @@
 			no-map;
 		};
 
-		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+		mcu_r5fss0_core0_dma_memory_region: memory@a0000000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0000000 0x00 0x100000>;
 			no-map;
 		};
 
-		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+		mcu_r5fss0_core0_memory_region: memory@a0100000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0100000 0x00 0xf00000>;
 			no-map;
 		};
-
-		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1000000 0x00 0x100000>;
-			no-map;
-		};
-
-		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa5000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa5100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c66_0_dma_memory_region: c66-dma-memory@a6000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa6000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c66_0_memory_region: c66-memory@a6100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa6100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c66_1_dma_memory_region: c66-dma-memory@a7000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa7000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c66_1_memory_region: c66-memory@a7100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa7100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c71_0_dma_memory_region: c71-dma-memory@a8000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa8000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c71_0_memory_region: c71-memory@a8100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa8100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		rtos_ipc_memory_region: ipc-memories@aa000000 {
-			reg = <0x00 0xaa000000 0x00 0x01c00000>;
-			alignment = <0x1000>;
-			no-map;
-		};
 	};
 
 	gpio_keys: gpio-keys {
@@ -865,129 +763,4 @@
 	status = "disabled";
 };
 
-&mailbox0_cluster0 {
-	status = "okay";
-	interrupts = <436>;
-
-	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster1 {
-	status = "okay";
-	interrupts = <432>;
-
-	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster2 {
-	status = "okay";
-	interrupts = <428>;
-
-	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster3 {
-	status = "okay";
-	interrupts = <424>;
-
-	mbox_c66_0: mbox-c66-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_c66_1: mbox-c66-1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster4 {
-	status = "okay";
-	interrupts = <420>;
-
-	mbox_c71_0: mbox-c71-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-};
-
-&mcu_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
-	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
-			<&mcu_r5fss0_core0_memory_region>;
-};
-
-&mcu_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
-	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
-			<&mcu_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
-	memory-region = <&main_r5fss0_core0_dma_memory_region>,
-			<&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
-	memory-region = <&main_r5fss0_core1_dma_memory_region>,
-			<&main_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss1_core0 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
-	memory-region = <&main_r5fss1_core0_dma_memory_region>,
-			<&main_r5fss1_core0_memory_region>;
-};
-
-&main_r5fss1_core1 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
-	memory-region = <&main_r5fss1_core1_dma_memory_region>,
-			<&main_r5fss1_core1_memory_region>;
-};
-
-&c66_0 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster3 &mbox_c66_0>;
-	memory-region = <&c66_0_dma_memory_region>,
-			<&c66_0_memory_region>;
-};
-
-&c66_1 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster3 &mbox_c66_1>;
-	memory-region = <&c66_1_dma_memory_region>,
-			<&c66_1_memory_region>;
-};
-
-&c71_0 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
-	memory-region = <&c71_0_dma_memory_region>,
-			<&c71_0_memory_region>;
-};
+#include "k3-j721e-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
index 5bd0d36bf33e..d5fd30a01032 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -608,6 +608,9 @@
 		cdns_csi2rx0: csi-bridge@4504000 {
 			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
 			reg = <0x0 0x4504000 0x0 0x1000>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error_irq", "irq";
 			clocks = <&k3_clks 26 2>, <&k3_clks 26 0>, <&k3_clks 26 2>,
 				<&k3_clks 26 2>, <&k3_clks 26 3>, <&k3_clks 26 3>;
 			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
@@ -661,6 +664,9 @@
 		cdns_csi2rx1: csi-bridge@4514000 {
 			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
 			reg = <0x0 0x4514000 0x0 0x1000>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error_irq", "irq";
 			clocks = <&k3_clks 27 2>, <&k3_clks 27 0>, <&k3_clks 27 2>,
 				 <&k3_clks 27 2>, <&k3_clks 27 3>, <&k3_clks 27 3>;
 			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
@@ -1881,6 +1887,45 @@
 		};
 	};
 
+	dphy2: phy@4480000 {
+		compatible = "ti,j721e-dphy";
+		reg = <0x00 0x04480000 0x00 0x1000>;
+		clocks = <&k3_clks 296 1>, <&k3_clks 296 3>;
+		clock-names = "psm", "pll_ref";
+		#phy-cells = <0>;
+		power-domains = <&k3_pds 296 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 296 3>;
+		assigned-clock-parents = <&k3_clks 296 4>;
+		assigned-clock-rates = <19200000>;
+		status = "disabled";
+	};
+
+	dsi0: dsi@4800000 {
+		compatible = "ti,j721e-dsi";
+		reg = <0x00 0x04800000 0x00 0x100000>, <0x00 0x04710000 0x00 0x100>;
+		clocks = <&k3_clks 150 1>, <&k3_clks 150 5>;
+		clock-names = "dsi_p_clk", "dsi_sys_clk";
+		power-domains = <&k3_pds 150 TI_SCI_PD_EXCLUSIVE>;
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_SPI 600 IRQ_TYPE_LEVEL_HIGH>;
+		phys = <&dphy2>;
+		phy-names = "dphy";
+		status = "disabled";
+
+		dsi0_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+			};
+
+			port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
 	dss: dss@4a00000 {
 		compatible = "ti,j721e-dss";
 		reg =
@@ -2176,6 +2221,7 @@
 		ranges = <0x5c00000 0x00 0x5c00000 0x20000>,
 			 <0x5d00000 0x00 0x5d00000 0x20000>;
 		power-domains = <&k3_pds 243 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 
 		main_r5fss0_core0: r5f@5c00000 {
 			compatible = "ti,j721e-r5f";
@@ -2190,6 +2236,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 
 		main_r5fss0_core1: r5f@5d00000 {
@@ -2205,6 +2252,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 	};
 
@@ -2216,6 +2264,7 @@
 		ranges = <0x5e00000 0x00 0x5e00000 0x20000>,
 			 <0x5f00000 0x00 0x5f00000 0x20000>;
 		power-domains = <&k3_pds 244 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 
 		main_r5fss1_core0: r5f@5e00000 {
 			compatible = "ti,j721e-r5f";
@@ -2230,6 +2279,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 
 		main_r5fss1_core1: r5f@5f00000 {
@@ -2245,6 +2295,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index b02142b2b460..42a21398e389 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -594,6 +594,7 @@
 		ranges = <0x41000000 0x00 0x41000000 0x20000>,
 			 <0x41400000 0x00 0x41400000 0x20000>;
 		power-domains = <&k3_pds 249 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 
 		mcu_r5fss0_core0: r5f@41000000 {
 			compatible = "ti,j721e-r5f";
@@ -608,6 +609,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 
 		mcu_r5fss0_core1: r5f@41400000 {
@@ -623,6 +625,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
index ffef3d1cfd55..5e5784ef6f85 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-sk.dts
@@ -48,119 +48,17 @@
 			no-map;
 		};
 
-		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+		mcu_r5fss0_core0_dma_memory_region: memory@a0000000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0000000 0x00 0x100000>;
 			no-map;
 		};
 
-		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+		mcu_r5fss0_core0_memory_region: memory@a0100000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0100000 0x00 0xf00000>;
 			no-map;
 		};
-
-		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1000000 0x00 0x100000>;
-			no-map;
-		};
-
-		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa5000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa5100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c66_0_dma_memory_region: c66-dma-memory@a6000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa6000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c66_0_memory_region: c66-memory@a6100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa6100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c66_1_dma_memory_region: c66-dma-memory@a7000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa7000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c66_1_memory_region: c66-memory@a7100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa7100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c71_0_dma_memory_region: c71-dma-memory@a8000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa8000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c71_0_memory_region: c71-memory@a8100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa8100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		rtos_ipc_memory_region: ipc-memories@aa000000 {
-			reg = <0x00 0xaa000000 0x00 0x01c00000>;
-			alignment = <0x1000>;
-			no-map;
-		};
 	};
 
 	vusb_main: fixedregulator-vusb-main5v0 {
@@ -1279,166 +1177,4 @@
 	status = "disabled";
 };
 
-&mailbox0_cluster0 {
-	status = "okay";
-	interrupts = <436>;
-
-	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster1 {
-	status = "okay";
-	interrupts = <432>;
-
-	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster2 {
-	status = "okay";
-	interrupts = <428>;
-
-	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster3 {
-	status = "okay";
-	interrupts = <424>;
-
-	mbox_c66_0: mbox-c66-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_c66_1: mbox-c66-1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster4 {
-	status = "okay";
-	interrupts = <420>;
-
-	mbox_c71_0: mbox-c71-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-};
-
-&mcu_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
-	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
-			<&mcu_r5fss0_core0_memory_region>;
-};
-
-&mcu_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
-	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
-			<&mcu_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss0 {
-	ti,cluster-mode = <0>;
-};
-
-&main_r5fss1 {
-	ti,cluster-mode = <0>;
-};
-
-/* Timers are used by Remoteproc firmware */
-&main_timer0 {
-	status = "reserved";
-};
-
-&main_timer1 {
-	status = "reserved";
-};
-
-&main_timer2 {
-	status = "reserved";
-};
-
-&main_timer12 {
-	status = "reserved";
-};
-
-&main_timer13 {
-	status = "reserved";
-};
-
-&main_timer14 {
-	status = "reserved";
-};
-
-&main_timer15 {
-	status = "reserved";
-};
-
-&main_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
-	memory-region = <&main_r5fss0_core0_dma_memory_region>,
-			<&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
-	memory-region = <&main_r5fss0_core1_dma_memory_region>,
-			<&main_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss1_core0 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
-	memory-region = <&main_r5fss1_core0_dma_memory_region>,
-			<&main_r5fss1_core0_memory_region>;
-};
-
-&main_r5fss1_core1 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
-	memory-region = <&main_r5fss1_core1_dma_memory_region>,
-			<&main_r5fss1_core1_memory_region>;
-};
-
-&c66_0 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster3 &mbox_c66_0>;
-	memory-region = <&c66_0_dma_memory_region>,
-			<&c66_0_memory_region>;
-};
-
-&c66_1 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster3 &mbox_c66_1>;
-	memory-region = <&c66_1_dma_memory_region>,
-			<&c66_1_memory_region>;
-};
-
-&c71_0 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
-	memory-region = <&c71_0_dma_memory_region>,
-			<&c71_0_memory_region>;
-};
+#include "k3-j721e-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
index 0722f6361cc8..c8073ee634b7 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
@@ -29,119 +29,17 @@
 			no-map;
 		};
 
-		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+		mcu_r5fss0_core0_dma_memory_region: memory@a0000000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0000000 0x00 0x100000>;
 			no-map;
 		};
 
-		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+		mcu_r5fss0_core0_memory_region: memory@a0100000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0100000 0x00 0xf00000>;
 			no-map;
 		};
-
-		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1000000 0x00 0x100000>;
-			no-map;
-		};
-
-		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa5000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa5100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c66_1_dma_memory_region: c66-dma-memory@a6000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa6000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c66_0_memory_region: c66-memory@a6100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa6100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c66_0_dma_memory_region: c66-dma-memory@a7000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa7000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c66_1_memory_region: c66-memory@a7100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa7100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c71_0_dma_memory_region: c71-dma-memory@a8000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa8000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c71_0_memory_region: c71-memory@a8100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa8100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		rtos_ipc_memory_region: ipc-memories@aa000000 {
-			reg = <0x00 0xaa000000 0x00 0x01c00000>;
-			alignment = <0x1000>;
-			no-map;
-		};
 	};
 };
 
@@ -484,166 +382,4 @@
 	};
 };
 
-&mailbox0_cluster0 {
-	status = "okay";
-	interrupts = <436>;
-
-	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster1 {
-	status = "okay";
-	interrupts = <432>;
-
-	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster2 {
-	status = "okay";
-	interrupts = <428>;
-
-	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster3 {
-	status = "okay";
-	interrupts = <424>;
-
-	mbox_c66_0: mbox-c66-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_c66_1: mbox-c66-1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster4 {
-	status = "okay";
-	interrupts = <420>;
-
-	mbox_c71_0: mbox-c71-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-};
-
-&mcu_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
-	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
-			<&mcu_r5fss0_core0_memory_region>;
-};
-
-&mcu_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
-	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
-			<&mcu_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss0 {
-	ti,cluster-mode = <0>;
-};
-
-&main_r5fss1 {
-	ti,cluster-mode = <0>;
-};
-
-/* Timers are used by Remoteproc firmware */
-&main_timer0 {
-	status = "reserved";
-};
-
-&main_timer1 {
-	status = "reserved";
-};
-
-&main_timer2 {
-	status = "reserved";
-};
-
-&main_timer12 {
-	status = "reserved";
-};
-
-&main_timer13 {
-	status = "reserved";
-};
-
-&main_timer14 {
-	status = "reserved";
-};
-
-&main_timer15 {
-	status = "reserved";
-};
-
-&main_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
-	memory-region = <&main_r5fss0_core0_dma_memory_region>,
-			<&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
-	memory-region = <&main_r5fss0_core1_dma_memory_region>,
-			<&main_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss1_core0 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
-	memory-region = <&main_r5fss1_core0_dma_memory_region>,
-			<&main_r5fss1_core0_memory_region>;
-};
-
-&main_r5fss1_core1 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
-	memory-region = <&main_r5fss1_core1_dma_memory_region>,
-			<&main_r5fss1_core1_memory_region>;
-};
-
-&c66_0 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster3 &mbox_c66_0>;
-	memory-region = <&c66_0_dma_memory_region>,
-			<&c66_0_memory_region>;
-};
-
-&c66_1 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster3 &mbox_c66_1>;
-	memory-region = <&c66_1_dma_memory_region>,
-			<&c66_1_memory_region>;
-};
-
-&c71_0 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
-	memory-region = <&c71_0_dma_memory_region>,
-			<&c71_0_memory_region>;
-};
+#include "k3-j721e-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-ti-ipc-firmware.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-ti-ipc-firmware.dtsi
new file mode 100644
index 000000000000..40c6cc99c405
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e-ti-ipc-firmware.dtsi
@@ -0,0 +1,288 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * Device Tree Source for enabling IPC using TI SDK firmware on J721E SoCs
+ *
+ * Copyright (C) 2018-2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&reserved_memory {
+	mcu_r5fss0_core1_dma_memory_region: memory@a1000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa1000000 0x00 0x100000>;
+		no-map;
+	};
+
+	mcu_r5fss0_core1_memory_region: memory@a1100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa1100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	main_r5fss0_core0_dma_memory_region: memory@a2000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa2000000 0x00 0x100000>;
+		no-map;
+	};
+
+	main_r5fss0_core0_memory_region: memory@a2100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa2100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	main_r5fss0_core1_dma_memory_region: memory@a3000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa3000000 0x00 0x100000>;
+		no-map;
+	};
+
+	main_r5fss0_core1_memory_region: memory@a3100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa3100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	main_r5fss1_core0_dma_memory_region: memory@a4000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa4000000 0x00 0x100000>;
+		no-map;
+	};
+
+	main_r5fss1_core0_memory_region: memory@a4100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa4100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	main_r5fss1_core1_dma_memory_region: memory@a5000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa5000000 0x00 0x100000>;
+		no-map;
+	};
+
+	main_r5fss1_core1_memory_region: memory@a5100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa5100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	/* Carveout locations are flipped due to caching */
+	c66_1_dma_memory_region: memory@a6000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa6000000 0x00 0x100000>;
+		no-map;
+	};
+
+	c66_0_memory_region: memory@a6100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa6100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	/* Carveout locations are flipped due to caching */
+	c66_0_dma_memory_region: memory@a7000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa7000000 0x00 0x100000>;
+		no-map;
+	};
+
+	c66_1_memory_region: memory@a7100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa7100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	c71_0_dma_memory_region: memory@a8000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa8000000 0x00 0x100000>;
+		no-map;
+	};
+
+	c71_0_memory_region: memory@a8100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa8100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	rtos_ipc_memory_region: memory@aa000000 {
+		reg = <0x00 0xaa000000 0x00 0x01c00000>;
+		alignment = <0x1000>;
+		no-map;
+	};
+};
+
+&mailbox0_cluster0 {
+	status = "okay";
+	interrupts = <436>;
+
+	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+	interrupts = <432>;
+
+	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster2 {
+	status = "okay";
+	interrupts = <428>;
+
+	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster3 {
+	status = "okay";
+	interrupts = <424>;
+
+	mbox_c66_0: mbox-c66-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_c66_1: mbox-c66-1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster4 {
+	status = "okay";
+	interrupts = <420>;
+
+	mbox_c71_0: mbox-c71-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+/* Timers are used by Remoteproc firmware */
+&main_timer0 {
+	status = "reserved";
+};
+
+&main_timer1 {
+	status = "reserved";
+};
+
+&main_timer2 {
+	status = "reserved";
+};
+
+&main_timer12 {
+	status = "reserved";
+};
+
+&main_timer13 {
+	status = "reserved";
+};
+
+&main_timer14 {
+	status = "reserved";
+};
+
+&main_timer15 {
+	status = "reserved";
+};
+
+&mcu_r5fss0 {
+	status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+};
+
+&mcu_r5fss0_core1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
+	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+			<&mcu_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss0 {
+	status = "okay";
+	ti,cluster-mode = <0>;
+};
+
+&main_r5fss0_core0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0_core1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
+	memory-region = <&main_r5fss0_core1_dma_memory_region>,
+			<&main_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss1 {
+	status = "okay";
+	ti,cluster-mode = <0>;
+};
+
+&main_r5fss1_core0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
+	memory-region = <&main_r5fss1_core0_dma_memory_region>,
+			<&main_r5fss1_core0_memory_region>;
+};
+
+&main_r5fss1_core1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
+	memory-region = <&main_r5fss1_core1_dma_memory_region>,
+			<&main_r5fss1_core1_memory_region>;
+};
+
+&c66_0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster3 &mbox_c66_0>;
+	memory-region = <&c66_0_dma_memory_region>,
+			<&c66_0_memory_region>;
+};
+
+&c66_1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster3 &mbox_c66_1>;
+	memory-region = <&c66_1_dma_memory_region>,
+			<&c66_1_memory_region>;
+};
+
+&c71_0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
+	memory-region = <&c71_0_dma_memory_region>,
+			<&c71_0_memory_region>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
index e2fc1288ed07..9e43dcff8ef2 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-common-proc-board.dts
@@ -93,6 +93,28 @@
 			 <3300000 0x1>;
 	};
 
+	dp1_pwr_3v3: regulator-dp1-prw {
+		compatible = "regulator-fixed";
+		regulator-name = "dp1-pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&exp4 1 GPIO_ACTIVE_HIGH>; /* P1 - DP1_PWR_SW_EN */
+		enable-active-high;
+	};
+
+	dp1: connector-dp1 {
+		compatible = "dp-connector";
+		label = "DP1";
+		type = "full-size";
+		dp-pwr-supply = <&dp1_pwr_3v3>;
+
+		port {
+			dp1_connector_in: endpoint {
+				remote-endpoint = <&dp1_out>;
+			};
+		};
+	};
+
 	transceiver1: can-phy1 {
 		compatible = "ti,tcan1043";
 		#phy-cells = <0>;
@@ -148,6 +170,13 @@
 		>;
 	};
 
+	main_i2c4_pins_default: main-i2c4-default-pins {
+		pinctrl-single,pins = <
+			J721S2_IOPAD(0x014, PIN_INPUT_PULLUP, 8) /* (AD25) I2C4_SCL */
+			J721S2_IOPAD(0x010, PIN_INPUT_PULLUP, 8) /* (AF28) I2C4_SDA */
+		>;
+	};
+
 	main_i2c5_pins_default: main-i2c5-default-pins {
 		pinctrl-single,pins = <
 			J721S2_IOPAD(0x01c, PIN_INPUT, 8) /* (Y24) MCAN15_TX.I2C5_SCL */
@@ -370,6 +399,23 @@
 	};
 };
 
+&main_i2c4 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&main_i2c4_pins_default>;
+	clock-frequency = <400000>;
+
+	exp4: gpio@20 {
+		compatible = "ti,tca6408";
+		reg = <0x20>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "DP0_PWR_SW_EN", "DP1_PWR_SW_EN", "UB981_PDB",
+				  "UB981_GPIO0", "UB981_GPIO1", "UB981_GPIO2",
+				  "UB981_GPIO3", "PWR_SW_CNTL_DSI0#";
+	};
+};
+
 &main_i2c5 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c5_pins_default>;
@@ -539,3 +585,74 @@
 	pinctrl-0 = <&main_mcan5_pins_default>;
 	phys = <&transceiver4>;
 };
+
+&dss {
+	/*
+	 * DSS on J721S2-EVM supports DP on VP0 and DSI on VP2.
+	 * These clock assignments are chosen to enable the following outputs:
+	 * VP0 - DisplayPort SST
+	 * VP2 - DSI
+	 */
+	status = "okay";
+	assigned-clocks = <&k3_clks 158 2>,
+			  <&k3_clks 158 14>;
+	assigned-clock-parents = <&k3_clks 158 3>,
+				 <&k3_clks 158 16>;
+};
+
+&dss_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	port@2 {
+		reg = <2>;
+
+		dpi2_out: endpoint {
+			remote-endpoint = <&dsi0_in>;
+		};
+	};
+};
+
+&dsi0_ports {
+	port@0 {
+		reg = <0>;
+
+		dsi0_out: endpoint {
+			remote-endpoint = <&dp1_in>;
+		};
+	};
+
+	port@1 {
+		reg = <1>;
+
+		dsi0_in: endpoint {
+			remote-endpoint = <&dpi2_out>;
+		};
+	};
+};
+
+&dsi_edp_bridge_ports {
+	port@0 {
+		reg = <0>;
+
+		dp1_in: endpoint {
+			remote-endpoint = <&dsi0_out>;
+		};
+	};
+
+	port@1 {
+		reg = <1>;
+
+		dp1_out: endpoint {
+			remote-endpoint = <&dp1_connector_in>;
+		};
+	};
+};
+
+&dphy_tx0 {
+	status = "okay";
+};
+
+&dsi0 {
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-evm-usb0-type-a.dtso b/arch/arm64/boot/dts/ti/k3-j721s2-evm-usb0-type-a.dtso
new file mode 100644
index 000000000000..fe4a23efe708
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-evm-usb0-type-a.dtso
@@ -0,0 +1,28 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * DT Overlay for enabling USB0 instance of USB in the Host Mode of operation
+ * with the Type-A Connector on the J7 common processor board.
+ *
+ * J7 Common Processor Board Product Link: https://www.ti.com/tool/J721EXCPXEVM
+ *
+ * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/gpio/gpio.h>
+
+&exp_som {
+	p0-hog {
+		/* P0 - USB2.0_MUX_SEL */
+		gpio-hog;
+		gpios = <0 GPIO_ACTIVE_HIGH>;
+		output-high;
+		line-name = "USB2.0_MUX_SEL";
+	};
+};
+
+&usb0 {
+	dr_mode = "host";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
index 62f45377a2c9..80c51b11ac9f 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi
@@ -1248,6 +1248,9 @@
 		cdns_csi2rx0: csi-bridge@4504000 {
 			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
 			reg = <0x00 0x04504000 0x00 0x1000>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error_irq", "irq";
 			clocks = <&k3_clks 38 3>, <&k3_clks 38 1>, <&k3_clks 38 3>,
 				<&k3_clks 38 3>, <&k3_clks 38 4>, <&k3_clks 38 4>;
 			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
@@ -1301,6 +1304,9 @@
 		cdns_csi2rx1: csi-bridge@4514000 {
 			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
 			reg = <0x00 0x04514000 0x00 0x1000>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error_irq", "irq";
 			clocks = <&k3_clks 39 3>, <&k3_clks 39 1>, <&k3_clks 39 3>,
 				<&k3_clks 39 3>, <&k3_clks 39 4>, <&k3_clks 39 4>;
 			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
@@ -1431,6 +1437,7 @@
 
 		pcie1_intc: interrupt-controller {
 			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <1>;
 			interrupt-parent = <&gic500>;
 			interrupts = <GIC_SPI 324 IRQ_TYPE_EDGE_RISING>;
@@ -1795,6 +1802,45 @@
 		status = "disabled";
 	};
 
+	dphy_tx0: phy@4480000 {
+		compatible = "ti,j721e-dphy";
+		reg = <0x00 0x04480000 0x00 0x00001000>;
+		clocks = <&k3_clks 363 8>, <&k3_clks 363 14>;
+		clock-names = "psm", "pll_ref";
+		#phy-cells = <0>;
+		power-domains = <&k3_pds 363 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 363 14>;
+		assigned-clock-parents = <&k3_clks 363 15>;
+		assigned-clock-rates = <19200000>;
+		status = "disabled";
+	};
+
+	dsi0: dsi@4800000 {
+		compatible = "ti,j721e-dsi";
+		reg = <0x00 0x04800000 0x00 0x00100000>,
+		      <0x00 0x04710000 0x00 0x00000100>;
+		clocks = <&k3_clks 154 4>, <&k3_clks 154 1>;
+		clock-names = "dsi_p_clk", "dsi_sys_clk";
+		power-domains = <&k3_pds 154 TI_SCI_PD_EXCLUSIVE>;
+		interrupts = <GIC_SPI 600 IRQ_TYPE_LEVEL_HIGH>;
+		phys = <&dphy_tx0>;
+		phy-names = "dphy";
+		status = "disabled";
+
+		dsi0_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+			};
+
+			port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
 	dss: dss@4a00000 {
 		compatible = "ti,j721e-dss";
 		reg = <0x00 0x04a00000 0x00 0x10000>, /* common_m */
@@ -1849,6 +1895,7 @@
 		ranges = <0x5c00000 0x00 0x5c00000 0x20000>,
 			 <0x5d00000 0x00 0x5d00000 0x20000>;
 		power-domains = <&k3_pds 277 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 
 		main_r5fss0_core0: r5f@5c00000 {
 			compatible = "ti,j721s2-r5f";
@@ -1863,6 +1910,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 
 		main_r5fss0_core1: r5f@5d00000 {
@@ -1878,6 +1926,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 	};
 
@@ -1889,6 +1938,7 @@
 		ranges = <0x5e00000 0x00 0x5e00000 0x20000>,
 			 <0x5f00000 0x00 0x5f00000 0x20000>;
 		power-domains = <&k3_pds 278 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 
 		main_r5fss1_core0: r5f@5e00000 {
 			compatible = "ti,j721s2-r5f";
@@ -1903,6 +1953,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 
 		main_r5fss1_core1: r5f@5f00000 {
@@ -1918,6 +1969,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
index bc31266126d0..837097751c18 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi
@@ -690,6 +690,7 @@
 		ranges = <0x41000000 0x00 0x41000000 0x20000>,
 			 <0x41400000 0x00 0x41400000 0x20000>;
 		power-domains = <&k3_pds 283 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 
 		mcu_r5fss0_core0: r5f@41000000 {
 			compatible = "ti,j721s2-r5f";
@@ -704,6 +705,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 
 		mcu_r5fss0_core1: r5f@41400000 {
@@ -719,6 +721,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
index 54fc5c4f8c3f..12a38dd1514b 100644
--- a/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi
@@ -31,107 +31,17 @@
 			no-map;
 		};
 
-		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+		mcu_r5fss0_core0_dma_memory_region: memory@a0000000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0000000 0x00 0x100000>;
 			no-map;
 		};
 
-		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+		mcu_r5fss0_core0_memory_region: memory@a0100000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0100000 0x00 0xf00000>;
 			no-map;
 		};
-
-		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1000000 0x00 0x100000>;
-			no-map;
-		};
-
-		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa5000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa5100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c71_0_dma_memory_region: c71-dma-memory@a6000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa6000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c71_0_memory_region: c71-memory@a6100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa6100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c71_1_dma_memory_region: c71-dma-memory@a7000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa7000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c71_1_memory_region: c71-memory@a7100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa7100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		rtos_ipc_memory_region: ipc-memories@a8000000 {
-			reg = <0x00 0xa8000000 0x00 0x01c00000>;
-			alignment = <0x1000>;
-			no-map;
-		};
 	};
 
 	mux0: mux-controller-0 {
@@ -152,6 +62,30 @@
 		#phy-cells = <0>;
 		max-bitrate = <5000000>;
 	};
+
+	vsys_io_1v8: regulator-vsys-io-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_io_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_io_1v2: regulator-vsys-io-1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_io_1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	edp1_refclk: clock-edp1-refclk {
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+		#clock-cells = <0>;
+	};
 };
 
 &wkup_pmx0 {
@@ -492,141 +426,31 @@
 	};
 };
 
-&mailbox0_cluster0 {
-	status = "okay";
-	interrupts = <436>;
-	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster1 {
-	status = "okay";
-	interrupts = <432>;
-	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster2 {
-	status = "okay";
-	interrupts = <428>;
-	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
+&main_i2c4 {
+	bridge_dsi_edp: bridge-dsi-edp@2c {
+		compatible = "ti,sn65dsi86";
+		reg = <0x2c>;
+		clock-names = "refclk";
+		clocks = <&edp1_refclk>;
+		enable-gpios = <&exp_som 5 0>;
+		vpll-supply = <&vsys_io_1v8>;
+		vccio-supply = <&vsys_io_1v8>;
+		vcca-supply = <&vsys_io_1v2>;
+		vcc-supply = <&vsys_io_1v2>;
+
+		dsi_edp_bridge_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
 
-&mailbox0_cluster4 {
-	status = "okay";
-	interrupts = <420>;
-	mbox_c71_0: mbox-c71-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
+			port@0 {
+				reg = <0>;
+			};
 
-	mbox_c71_1: mbox-c71-1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
+			port@1 {
+				reg = <1>;
+			};
+		};
 	};
 };
 
-&mcu_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
-	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
-			<&mcu_r5fss0_core0_memory_region>;
-};
-
-&mcu_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
-	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
-			<&mcu_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss0 {
-	ti,cluster-mode = <0>;
-};
-
-&main_r5fss1 {
-	ti,cluster-mode = <0>;
-};
-
-/* Timers are used by Remoteproc firmware */
-&main_timer0 {
-	status = "reserved";
-};
-
-&main_timer1 {
-	status = "reserved";
-};
-
-&main_timer2 {
-	status = "reserved";
-};
-
-&main_timer3 {
-	status = "reserved";
-};
-
-&main_timer4 {
-	status = "reserved";
-};
-
-&main_timer5 {
-	status = "reserved";
-};
-
-&main_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
-	memory-region = <&main_r5fss0_core0_dma_memory_region>,
-			<&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
-	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
-	memory-region = <&main_r5fss0_core1_dma_memory_region>,
-			<&main_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss1_core0 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
-	memory-region = <&main_r5fss1_core0_dma_memory_region>,
-			<&main_r5fss1_core0_memory_region>;
-};
-
-&main_r5fss1_core1 {
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
-	memory-region = <&main_r5fss1_core1_dma_memory_region>,
-			<&main_r5fss1_core1_memory_region>;
-};
-
-&c71_0 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
-	memory-region = <&c71_0_dma_memory_region>,
-			<&c71_0_memory_region>;
-};
-
-&c71_1 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster4 &mbox_c71_1>;
-	memory-region = <&c71_1_dma_memory_region>,
-			<&c71_1_memory_region>;
-};
+#include "k3-j721s2-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-j721s2-ti-ipc-firmware.dtsi b/arch/arm64/boot/dts/ti/k3-j721s2-ti-ipc-firmware.dtsi
new file mode 100644
index 000000000000..ebab0cc580bb
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721s2-ti-ipc-firmware.dtsi
@@ -0,0 +1,253 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * Device Tree Source for enabling IPC using TI SDK firmware on J721S2 SoCs
+ *
+ * Copyright (C) 2021-2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&reserved_memory {
+	mcu_r5fss0_core1_dma_memory_region: memory@a1000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa1000000 0x00 0x100000>;
+		no-map;
+	};
+
+	mcu_r5fss0_core1_memory_region: memory@a1100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa1100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	main_r5fss0_core0_dma_memory_region: memory@a2000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa2000000 0x00 0x100000>;
+		no-map;
+	};
+
+	main_r5fss0_core0_memory_region: memory@a2100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa2100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	main_r5fss0_core1_dma_memory_region: memory@a3000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa3000000 0x00 0x100000>;
+		no-map;
+	};
+
+	main_r5fss0_core1_memory_region: memory@a3100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa3100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	main_r5fss1_core0_dma_memory_region: memory@a4000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa4000000 0x00 0x100000>;
+		no-map;
+	};
+
+	main_r5fss1_core0_memory_region: memory@a4100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa4100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	main_r5fss1_core1_dma_memory_region: memory@a5000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa5000000 0x00 0x100000>;
+		no-map;
+	};
+
+	main_r5fss1_core1_memory_region: memory@a5100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa5100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	c71_0_dma_memory_region: memory@a6000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa6000000 0x00 0x100000>;
+		no-map;
+	};
+
+	c71_0_memory_region: memory@a6100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa6100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	c71_1_dma_memory_region: memory@a7000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa7000000 0x00 0x100000>;
+		no-map;
+	};
+
+	c71_1_memory_region: memory@a7100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa7100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	rtos_ipc_memory_region: memory@a8000000 {
+		reg = <0x00 0xa8000000 0x00 0x01c00000>;
+		alignment = <0x1000>;
+		no-map;
+	};
+};
+
+&mailbox0_cluster0 {
+	status = "okay";
+	interrupts = <436>;
+
+	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+	interrupts = <432>;
+
+	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster2 {
+	status = "okay";
+	interrupts = <428>;
+
+	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster4 {
+	status = "okay";
+	interrupts = <420>;
+
+	mbox_c71_0: mbox-c71-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_c71_1: mbox-c71-1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+/* Timers are used by Remoteproc firmware */
+&main_timer0 {
+	status = "reserved";
+};
+
+&main_timer1 {
+	status = "reserved";
+};
+
+&main_timer2 {
+	status = "reserved";
+};
+
+&main_timer3 {
+	status = "reserved";
+};
+
+&main_timer4 {
+	status = "reserved";
+};
+
+&main_timer5 {
+	status = "reserved";
+};
+
+&mcu_r5fss0 {
+	status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+	status = "okay";
+};
+
+&mcu_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
+	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+			<&mcu_r5fss0_core1_memory_region>;
+	status = "okay";
+};
+
+&main_r5fss0 {
+	ti,cluster-mode = <0>;
+	status = "okay";
+};
+
+&main_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+	status = "okay";
+};
+
+&main_r5fss0_core1 {
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
+	memory-region = <&main_r5fss0_core1_dma_memory_region>,
+			<&main_r5fss0_core1_memory_region>;
+	status = "okay";
+};
+
+&main_r5fss1 {
+	ti,cluster-mode = <0>;
+	status = "okay";
+};
+
+&main_r5fss1_core0 {
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
+	memory-region = <&main_r5fss1_core0_dma_memory_region>,
+			<&main_r5fss1_core0_memory_region>;
+	status = "okay";
+};
+
+&main_r5fss1_core1 {
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
+	memory-region = <&main_r5fss1_core1_dma_memory_region>,
+			<&main_r5fss1_core1_memory_region>;
+	status = "okay";
+};
+
+&c71_0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
+	memory-region = <&c71_0_dma_memory_region>,
+			<&c71_0_memory_region>;
+};
+
+&c71_1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster4 &mbox_c71_1>;
+	memory-region = <&c71_1_dma_memory_region>,
+			<&c71_1_memory_region>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
index 9d8abfa9afd2..e0e303da7e15 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j722s-evm.dts
@@ -52,71 +52,17 @@
 			no-map;
 		};
 
-		wkup_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+		wkup_r5fss0_core0_dma_memory_region: memory@a0000000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0000000 0x00 0x100000>;
 			no-map;
 		};
 
-		wkup_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+		wkup_r5fss0_core0_memory_region: memory@a0100000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0100000 0x00 0xf00000>;
 			no-map;
 		};
-
-		mcu_r5fss0_core0_dma_memory_region: mcu-r5fss-dma-memory-region@a1000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1000000 0x00 0x100000>;
-			no-map;
-		};
-
-		mcu_r5fss0_core0_memory_region: mcu-r5fss-memory-region@a1100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_dma_memory_region: main-r5fss-dma-memory-region@a2000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_memory_region: main-r5fss-memory-region@a2100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c7x_0_dma_memory_region: c7x-dma-memory@a3000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c7x_0_memory_region: c7x-memory@a3100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c7x_1_dma_memory_region: c7x-dma-memory@a4000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c7x_1_memory_region: c7x-memory@a4100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		rtos_ipc_memory_region: ipc-memories@a5000000 {
-			reg = <0x00 0xa5000000 0x00 0x1c00000>;
-			alignment = <0x1000>;
-			no-map;
-		};
 	};
 
 	vmain_pd: regulator-0 {
@@ -788,104 +734,6 @@
 	bootph-all;
 };
 
-&mailbox0_cluster0 {
-	status = "okay";
-
-	mbox_wkup_r5_0: mbox-wkup-r5-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-};
-
-&mailbox0_cluster1 {
-	status = "okay";
-
-	mbox_mcu_r5_0: mbox-mcu-r5-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-};
-
-&mailbox0_cluster2 {
-	status = "okay";
-
-	mbox_c7x_0: mbox-c7x-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-};
-
-&mailbox0_cluster3 {
-	status = "okay";
-
-	mbox_main_r5_0: mbox-main-r5-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_c7x_1: mbox-c7x-1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-/* Timers are used by Remoteproc firmware */
-&main_timer0 {
-	status = "reserved";
-};
-
-&main_timer1 {
-	status = "reserved";
-};
-
-&main_timer2 {
-	status = "reserved";
-};
-
-&wkup_r5fss0 {
-	status = "okay";
-};
-
-&wkup_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster0 &mbox_wkup_r5_0>;
-	memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
-			<&wkup_r5fss0_core0_memory_region>;
-};
-
-&mcu_r5fss0 {
-	status = "okay";
-};
-
-&mcu_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster1 &mbox_mcu_r5_0>;
-	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
-			<&mcu_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0 {
-	status = "okay";
-};
-
-&main_r5fss0_core0 {
-	mboxes = <&mailbox0_cluster3 &mbox_main_r5_0>;
-	memory-region = <&main_r5fss0_core0_dma_memory_region>,
-			<&main_r5fss0_core0_memory_region>;
-};
-
-&c7x_0 {
-	mboxes = <&mailbox0_cluster2 &mbox_c7x_0>;
-	memory-region = <&c7x_0_dma_memory_region>,
-			<&c7x_0_memory_region>;
-	status = "okay";
-};
-
-&c7x_1 {
-	mboxes = <&mailbox0_cluster3 &mbox_c7x_1>;
-	memory-region = <&c7x_1_dma_memory_region>,
-			<&c7x_1_memory_region>;
-	status = "okay";
-};
-
 &serdes_ln_ctrl {
 	idle-states = <J722S_SERDES0_LANE0_USB>,
 		      <J722S_SERDES1_LANE0_PCIE0_LANE0>;
@@ -936,6 +784,10 @@
 	usb-role-switch;
 };
 
+&usb0_phy_ctrl {
+	bootph-all;
+};
+
 &usbss1 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_usb1_pins_default>;
@@ -996,3 +848,5 @@
 	clock-frequency = <400000>;
 	status = "okay";
 };
+
+#include "k3-j722s-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
index 5cfa7bf36641..d57fdd38bdce 100644
--- a/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j722s-main.dtsi
@@ -168,6 +168,9 @@
 		cdns_csi2rx1: csi-bridge@30121000 {
 			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
 			reg = <0x00 0x30121000 0x00 0x1000>;
+			interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error_irq", "irq";
 			clocks = <&k3_clks 247 0>, <&k3_clks 247 3>, <&k3_clks 247 0>,
 				 <&k3_clks 247 0>, <&k3_clks 247 4>, <&k3_clks 247 4>;
 			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
@@ -221,6 +224,9 @@
 		cdns_csi2rx2: csi-bridge@30141000 {
 			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
 			reg = <0x00 0x30141000 0x00 0x1000>;
+			interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 200 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error_irq", "irq";
 			clocks = <&k3_clks 248 0>, <&k3_clks 248 3>, <&k3_clks 248 0>,
 				 <&k3_clks 248 0>, <&k3_clks 248 4>, <&k3_clks 248 4>;
 			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
@@ -274,6 +280,9 @@
 		cdns_csi2rx3: csi-bridge@30161000 {
 			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
 			reg = <0x00 0x30161000 0x00 0x1000>;
+			interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error_irq", "irq";
 			clocks = <&k3_clks 249 0>, <&k3_clks 249 3>, <&k3_clks 249 0>,
 				 <&k3_clks 249 0>, <&k3_clks 249 4>, <&k3_clks 249 4>;
 			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
@@ -359,6 +368,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 	};
 
@@ -385,6 +395,16 @@
 		ti,sci-proc-ids = <0x31 0xff>;
 		status = "disabled";
 	};
+
+	e5010: jpeg-encoder@fd20000 {
+		compatible = "ti,am62a-jpeg-enc", "img,e5010-jpeg-enc";
+		reg = <0x00 0xfd20000 0x00 0x100>,
+		      <0x00 0xfd20200 0x00 0x200>;
+		reg-names = "core", "mmu";
+		clocks = <&k3_clks 201 0>;
+		power-domains = <&k3_pds 201 TI_SCI_PD_EXCLUSIVE>;
+		interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+	};
 };
 
 &main_bcdma_csi {
diff --git a/arch/arm64/boot/dts/ti/k3-j722s-ti-ipc-firmware.dtsi b/arch/arm64/boot/dts/ti/k3-j722s-ti-ipc-firmware.dtsi
new file mode 100644
index 000000000000..cb7cd385a165
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j722s-ti-ipc-firmware.dtsi
@@ -0,0 +1,163 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * Device Tree Source for enabling IPC using TI SDK firmware on J722S SoCs
+ *
+ * Copyright (C) 2024-2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&reserved_memory {
+	mcu_r5fss0_core0_dma_memory_region: memory@a1000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa1000000 0x00 0x100000>;
+		no-map;
+	};
+
+	mcu_r5fss0_core0_memory_region: memory@a1100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa1100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	main_r5fss0_core0_dma_memory_region: memory@a2000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa2000000 0x00 0x100000>;
+		no-map;
+	};
+
+	main_r5fss0_core0_memory_region: memory@a2100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa2100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	c7x_0_dma_memory_region: memory@a3000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa3000000 0x00 0x100000>;
+		no-map;
+	};
+
+	c7x_0_memory_region: memory@a3100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa3100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	c7x_1_dma_memory_region: memory@a4000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa4000000 0x00 0x100000>;
+		no-map;
+	};
+
+	c7x_1_memory_region: memory@a4100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa4100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	rtos_ipc_memory_region: memory@a5000000 {
+		reg = <0x00 0xa5000000 0x00 0x1c00000>;
+		alignment = <0x1000>;
+		no-map;
+	};
+};
+
+&mailbox0_cluster0 {
+	status = "okay";
+
+	mbox_wkup_r5_0: mbox-wkup-r5-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+
+	mbox_mcu_r5_0: mbox-mcu-r5-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mailbox0_cluster2 {
+	status = "okay";
+
+	mbox_c7x_0: mbox-c7x-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+&mailbox0_cluster3 {
+	status = "okay";
+
+	mbox_main_r5_0: mbox-main-r5-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_c7x_1: mbox-c7x-1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+/* Timers are used by Remoteproc firmware */
+&main_timer0 {
+	status = "reserved";
+};
+
+&main_timer1 {
+	status = "reserved";
+};
+
+&main_timer2 {
+	status = "reserved";
+};
+
+&wkup_r5fss0 {
+	status = "okay";
+};
+
+&wkup_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster0 &mbox_wkup_r5_0>;
+	memory-region = <&wkup_r5fss0_core0_dma_memory_region>,
+			<&wkup_r5fss0_core0_memory_region>;
+	status = "okay";
+};
+
+&mcu_r5fss0 {
+	status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster1 &mbox_mcu_r5_0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+	status = "okay";
+};
+
+&main_r5fss0 {
+	status = "okay";
+};
+
+&main_r5fss0_core0 {
+	mboxes = <&mailbox0_cluster3 &mbox_main_r5_0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+	status = "okay";
+};
+
+&c7x_0 {
+	mboxes = <&mailbox0_cluster2 &mbox_c7x_0>;
+	memory-region = <&c7x_0_dma_memory_region>,
+			<&c7x_0_memory_region>;
+	status = "okay";
+};
+
+&c7x_1 {
+	mboxes = <&mailbox0_cluster3 &mbox_c7x_1>;
+	memory-region = <&c7x_1_dma_memory_region>,
+			<&c7x_1_memory_region>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j742s2-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j742s2-mcu-wakeup.dtsi
new file mode 100644
index 000000000000..61db2348d6a4
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j742s2-mcu-wakeup.dtsi
@@ -0,0 +1,17 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/*
+ * Device Tree Source for J742S2 SoC Family
+ *
+ * TRM: https://www.ti.com/lit/pdf/spruje3
+ *
+ * Copyright (C) 2025 Texas Instruments Incorporated - https://www.ti.com/
+ *
+ */
+
+&mcu_r5fss0_core0 {
+	firmware-name = "j742s2-mcu-r5f0_0-fw";
+};
+
+&mcu_r5fss0_core1 {
+	firmware-name = "j742s2-mcu-r5f0_1-fw";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j742s2.dtsi b/arch/arm64/boot/dts/ti/k3-j742s2.dtsi
index 7a72f82f56d6..d265df1abade 100644
--- a/arch/arm64/boot/dts/ti/k3-j742s2.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j742s2.dtsi
@@ -96,3 +96,4 @@
 };
 
 #include "k3-j742s2-main.dtsi"
+#include "k3-j742s2-mcu-wakeup.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
index a84bde08f85e..6c7458c76f53 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-evm.dts
@@ -27,31 +27,7 @@
 	reserved_memory: reserved-memory {
 		#address-cells = <2>;
 		#size-cells = <2>;
-
-		c71_3_dma_memory_region: c71-dma-memory@ab000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xab000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c71_3_memory_region: c71-memory@ab100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xab100000 0x00 0xf00000>;
-			no-map;
-		};
-	};
-};
-
-&mailbox0_cluster5 {
-	mbox_c71_3: mbox-c71-3 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
 	};
 };
 
-&c71_3 {
-	mboxes = <&mailbox0_cluster5 &mbox_c71_3>;
-	memory-region = <&c71_3_dma_memory_region>,
-			<&c71_3_memory_region>;
-	status = "okay";
-};
+#include "k3-j784s4-ti-ipc-firmware.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi
index fa656b7b13a1..419c1a70e028 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-evm-common.dtsi
@@ -35,137 +35,17 @@
 			no-map;
 		};
 
-		mcu_r5fss0_core0_dma_memory_region: r5f-dma-memory@a0000000 {
+		mcu_r5fss0_core0_dma_memory_region: memory@a0000000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0000000 0x00 0x100000>;
 			no-map;
 		};
 
-		mcu_r5fss0_core0_memory_region: r5f-memory@a0100000 {
+		mcu_r5fss0_core0_memory_region: memory@a0100000 {
 			compatible = "shared-dma-pool";
 			reg = <0x00 0xa0100000 0x00 0xf00000>;
 			no-map;
 		};
-
-		mcu_r5fss0_core1_dma_memory_region: r5f-dma-memory@a1000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1000000 0x00 0x100000>;
-			no-map;
-		};
-
-		mcu_r5fss0_core1_memory_region: r5f-memory@a1100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa1100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_dma_memory_region: r5f-dma-memory@a2000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core0_memory_region: r5f-memory@a2100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa2100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_dma_memory_region: r5f-dma-memory@a3000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss0_core1_memory_region: r5f-memory@a3100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa3100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_dma_memory_region: r5f-dma-memory@a4000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core0_memory_region: r5f-memory@a4100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa4100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_dma_memory_region: r5f-dma-memory@a5000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa5000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss1_core1_memory_region: r5f-memory@a5100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa5100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss2_core0_dma_memory_region: r5f-dma-memory@a6000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa6000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss2_core0_memory_region: r5f-memory@a6100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa6100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		main_r5fss2_core1_dma_memory_region: r5f-dma-memory@a7000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa7000000 0x00 0x100000>;
-			no-map;
-		};
-
-		main_r5fss2_core1_memory_region: r5f-memory@a7100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa7100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c71_0_dma_memory_region: c71-dma-memory@a8000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa8000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c71_0_memory_region: c71-memory@a8100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa8100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c71_1_dma_memory_region: c71-dma-memory@a9000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa9000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c71_1_memory_region: c71-memory@a9100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xa9100000 0x00 0xf00000>;
-			no-map;
-		};
-
-		c71_2_dma_memory_region: c71-dma-memory@aa000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xaa000000 0x00 0x100000>;
-			no-map;
-		};
-
-		c71_2_memory_region: c71-memory@aa100000 {
-			compatible = "shared-dma-pool";
-			reg = <0x00 0xaa100000 0x00 0xf00000>;
-			no-map;
-		};
 	};
 
 	evm_12v0: regulator-evm12v0 {
@@ -301,6 +181,52 @@
 		clock-names = "cpb-mcasp-auxclk", "cpb-mcasp-auxclk-48000",
 			      "cpb-codec-scki", "cpb-codec-scki-48000";
 	};
+
+	vsys_io_1v8: regulator-vsys-io-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_io_1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	vsys_io_1v2: regulator-vsys-io-1v2 {
+		compatible = "regulator-fixed";
+		regulator-name = "vsys_io_1v2";
+		regulator-min-microvolt = <1200000>;
+		regulator-max-microvolt = <1200000>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
+	edp1_refclk: clock-edp1-refclk {
+		compatible = "fixed-clock";
+		clock-frequency = <19200000>;
+		#clock-cells = <0>;
+	};
+
+	dp1_pwr_3v3: regulator-dp1-prw {
+		compatible = "regulator-fixed";
+		regulator-name = "dp1-pwr";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		gpio = <&exp4 1 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	dp1: connector-dp1 {
+		compatible = "dp-connector";
+		label = "DP1";
+		type = "full-size";
+		dp-pwr-supply = <&dp1_pwr_3v3>;
+
+		port {
+			dp1_connector_in: endpoint {
+				remote-endpoint = <&dp1_out>;
+			};
+		};
+	};
 };
 
 &wkup_gpio0 {
@@ -1023,221 +949,6 @@
 	status = "okay";
 };
 
-&mailbox0_cluster0 {
-	status = "okay";
-	interrupts = <436>;
-
-	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster1 {
-	status = "okay";
-	interrupts = <432>;
-
-	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster2 {
-	status = "okay";
-	interrupts = <428>;
-
-	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster3 {
-	status = "okay";
-	interrupts = <424>;
-
-	mbox_main_r5fss2_core0: mbox-main-r5fss2-core0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_main_r5fss2_core1: mbox-main-r5fss2-core1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster4 {
-	status = "okay";
-	interrupts = <420>;
-
-	mbox_c71_0: mbox-c71-0 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-
-	mbox_c71_1: mbox-c71-1 {
-		ti,mbox-rx = <2 0 0>;
-		ti,mbox-tx = <3 0 0>;
-	};
-};
-
-&mailbox0_cluster5 {
-	status = "okay";
-	interrupts = <416>;
-
-	mbox_c71_2: mbox-c71-2 {
-		ti,mbox-rx = <0 0 0>;
-		ti,mbox-tx = <1 0 0>;
-	};
-};
-
-&mcu_r5fss0_core0 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
-	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
-			<&mcu_r5fss0_core0_memory_region>;
-};
-
-&mcu_r5fss0_core1 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
-	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
-			<&mcu_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss0 {
-	ti,cluster-mode = <0>;
-};
-
-&main_r5fss1 {
-	ti,cluster-mode = <0>;
-};
-
-&main_r5fss2 {
-	ti,cluster-mode = <0>;
-};
-
-/* Timers are used by Remoteproc firmware */
-&main_timer0 {
-	status = "reserved";
-};
-
-&main_timer1 {
-	status = "reserved";
-};
-
-&main_timer2 {
-	status = "reserved";
-};
-
-&main_timer3 {
-	status = "reserved";
-};
-
-&main_timer4 {
-	status = "reserved";
-};
-
-&main_timer5 {
-	status = "reserved";
-};
-
-&main_timer6 {
-	status = "reserved";
-};
-
-&main_timer7 {
-	status = "reserved";
-};
-
-&main_timer8 {
-	status = "reserved";
-};
-
-&main_timer9 {
-	status = "reserved";
-};
-
-&main_r5fss0_core0 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
-	memory-region = <&main_r5fss0_core0_dma_memory_region>,
-			<&main_r5fss0_core0_memory_region>;
-};
-
-&main_r5fss0_core1 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
-	memory-region = <&main_r5fss0_core1_dma_memory_region>,
-			<&main_r5fss0_core1_memory_region>;
-};
-
-&main_r5fss1_core0 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
-	memory-region = <&main_r5fss1_core0_dma_memory_region>,
-			<&main_r5fss1_core0_memory_region>;
-};
-
-&main_r5fss1_core1 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
-	memory-region = <&main_r5fss1_core1_dma_memory_region>,
-			<&main_r5fss1_core1_memory_region>;
-};
-
-&main_r5fss2_core0 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core0>;
-	memory-region = <&main_r5fss2_core0_dma_memory_region>,
-			<&main_r5fss2_core0_memory_region>;
-};
-
-&main_r5fss2_core1 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core1>;
-	memory-region = <&main_r5fss2_core1_dma_memory_region>,
-			<&main_r5fss2_core1_memory_region>;
-};
-
-&c71_0 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
-	memory-region = <&c71_0_dma_memory_region>,
-			<&c71_0_memory_region>;
-};
-
-&c71_1 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster4 &mbox_c71_1>;
-	memory-region = <&c71_1_dma_memory_region>,
-			<&c71_1_memory_region>;
-};
-
-&c71_2 {
-	status = "okay";
-	mboxes = <&mailbox0_cluster5 &mbox_c71_2>;
-	memory-region = <&c71_2_dma_memory_region>,
-			<&c71_2_memory_region>;
-};
-
 &tscadc0 {
 	pinctrl-0 = <&mcu_adc0_pins_default>;
 	pinctrl-names = "default";
@@ -1340,12 +1051,26 @@
 };
 
 &dss_ports {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
 	/* DP */
-	port {
+	port@0 {
+		reg = <0>;
+
 		dpi0_out: endpoint {
 			remote-endpoint = <&dp0_in>;
 		};
 	};
+
+	/* DSI */
+	port@2 {
+		reg = <2>;
+
+		dpi2_out: endpoint {
+			remote-endpoint = <&dsi0_in>;
+		};
+	};
 };
 
 &main_i2c4 {
@@ -1360,6 +1085,65 @@
 		gpio-controller;
 		#gpio-cells = <2>;
 	};
+
+	bridge_dsi_edp: bridge-dsi-edp@2c {
+		compatible = "ti,sn65dsi86";
+		reg = <0x2c>;
+		clock-names = "refclk";
+		clocks = <&edp1_refclk>;
+		enable-gpios = <&exp4 2 GPIO_ACTIVE_HIGH>;
+		vpll-supply = <&vsys_io_1v8>;
+		vccio-supply = <&vsys_io_1v8>;
+		vcca-supply = <&vsys_io_1v2>;
+		vcc-supply = <&vsys_io_1v2>;
+
+		dsi_edp_bridge_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				dp1_in: endpoint {
+					remote-endpoint = <&dsi0_out>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				dp1_out: endpoint {
+					remote-endpoint = <&dp1_connector_in>;
+				};
+			};
+		};
+	};
+};
+
+&dsi0_ports {
+	port@0 {
+		reg = <0>;
+
+		dsi0_out: endpoint {
+			remote-endpoint = <&dp1_in>;
+		};
+	};
+
+	port@1 {
+		reg = <1>;
+
+		dsi0_in: endpoint {
+			remote-endpoint = <&dpi2_out>;
+		};
+	};
+};
+
+&dphy_tx0 {
+	status = "okay";
+};
+
+&dsi0 {
+	status = "okay";
 };
 
 &dp0_ports {
@@ -1493,3 +1277,5 @@
 		0 0 0 0
 	>;
 };
+
+#include "k3-j784s4-j742s2-ti-ipc-firmware-common.dtsi"
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi
index 7c5b0c69897d..9cc0901d58fb 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-main-common.dtsi
@@ -819,6 +819,9 @@
 		cdns_csi2rx0: csi-bridge@4504000 {
 			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
 			reg = <0x00 0x04504000 0x00 0x00001000>;
+			interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error_irq", "irq";
 			clocks = <&k3_clks 72 2>, <&k3_clks 72 0>, <&k3_clks 72 2>,
 				<&k3_clks 72 2>, <&k3_clks 72 3>, <&k3_clks 72 3>;
 			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
@@ -872,6 +875,9 @@
 		cdns_csi2rx1: csi-bridge@4514000 {
 			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
 			reg = <0x00 0x04514000 0x00 0x00001000>;
+			interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error_irq", "irq";
 			clocks = <&k3_clks 73 2>, <&k3_clks 73 0>, <&k3_clks 73 2>,
 				<&k3_clks 73 2>, <&k3_clks 73 3>, <&k3_clks 73 3>;
 			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
@@ -924,6 +930,9 @@
 		cdns_csi2rx2: csi-bridge@4524000 {
 			compatible = "ti,j721e-csi2rx", "cdns,csi2rx";
 			reg = <0x00 0x04524000 0x00 0x00001000>;
+			interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "error_irq", "irq";
 			clocks = <&k3_clks 74 2>, <&k3_clks 74 0>, <&k3_clks 74 2>,
 				<&k3_clks 74 2>, <&k3_clks 74 3>, <&k3_clks 74 3>;
 			clock-names = "sys_clk", "p_clk", "pixel_if0_clk",
@@ -2165,6 +2174,7 @@
 		ranges = <0x5c00000 0x00 0x5c00000 0x20000>,
 			 <0x5d00000 0x00 0x5d00000 0x20000>;
 		power-domains = <&k3_pds 336 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 
 		main_r5fss0_core0: r5f@5c00000 {
 			compatible = "ti,j721s2-r5f";
@@ -2179,6 +2189,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 
 		main_r5fss0_core1: r5f@5d00000 {
@@ -2194,6 +2205,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 	};
 
@@ -2205,6 +2217,7 @@
 		ranges = <0x5e00000 0x00 0x5e00000 0x20000>,
 			 <0x5f00000 0x00 0x5f00000 0x20000>;
 		power-domains = <&k3_pds 337 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 
 		main_r5fss1_core0: r5f@5e00000 {
 			compatible = "ti,j721s2-r5f";
@@ -2219,6 +2232,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 
 		main_r5fss1_core1: r5f@5f00000 {
@@ -2234,6 +2248,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 	};
 
@@ -2245,6 +2260,7 @@
 		ranges = <0x5900000 0x00 0x5900000 0x20000>,
 			 <0x5a00000 0x00 0x5a00000 0x20000>;
 		power-domains = <&k3_pds 338 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 
 		main_r5fss2_core0: r5f@5900000 {
 			compatible = "ti,j721s2-r5f";
@@ -2259,6 +2275,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 
 		main_r5fss2_core1: r5f@5a00000 {
@@ -2274,6 +2291,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 	};
 
@@ -2522,6 +2540,45 @@
 		status = "reserved";
 	};
 
+	dphy_tx0: phy@4480000 {
+		compatible = "ti,j721e-dphy";
+		reg = <0x00 0x04480000 0x00 0x00001000>;
+		clocks = <&k3_clks 402 20>, <&k3_clks 402 3>;
+		clock-names = "psm", "pll_ref";
+		#phy-cells = <0>;
+		power-domains = <&k3_pds 402 TI_SCI_PD_EXCLUSIVE>;
+		assigned-clocks = <&k3_clks 402 3>;
+		assigned-clock-parents = <&k3_clks 402 4>;
+		assigned-clock-rates = <19200000>;
+		status = "disabled";
+	};
+
+	dsi0: dsi@4800000 {
+		compatible = "ti,j721e-dsi";
+		reg = <0x00 0x04800000 0x00 0x00100000>,
+		      <0x00 0x04710000 0x00 0x00000100>;
+		clocks = <&k3_clks 215 2>, <&k3_clks 215 5>;
+		clock-names = "dsi_p_clk", "dsi_sys_clk";
+		power-domains = <&k3_pds 215 TI_SCI_PD_EXCLUSIVE>;
+		interrupts = <GIC_SPI 600 IRQ_TYPE_LEVEL_HIGH>;
+		phys = <&dphy_tx0>;
+		phy-names = "dphy";
+		status = "disabled";
+
+		dsi0_ports: ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+			};
+
+			port@1 {
+				reg = <1>;
+			};
+		};
+	};
+
 	mhdp: bridge@a000000 {
 		compatible = "ti,j721e-mhdp8546";
 		reg = <0x0 0xa000000 0x0 0x30a00>,
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-mcu-wakeup-common.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-mcu-wakeup-common.dtsi
index 52e2965a3bf5..cc22bfb5f599 100644
--- a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-mcu-wakeup-common.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-mcu-wakeup-common.dtsi
@@ -595,6 +595,7 @@
 		ranges = <0x41000000 0x00 0x41000000 0x20000>,
 			 <0x41400000 0x00 0x41400000 0x20000>;
 		power-domains = <&k3_pds 345 TI_SCI_PD_EXCLUSIVE>;
+		status = "disabled";
 
 		mcu_r5fss0_core0: r5f@41000000 {
 			compatible = "ti,j721s2-r5f";
@@ -609,6 +610,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 
 		mcu_r5fss0_core1: r5f@41400000 {
@@ -624,6 +626,7 @@
 			ti,atcm-enable = <1>;
 			ti,btcm-enable = <1>;
 			ti,loczrama = <1>;
+			status = "disabled";
 		};
 	};
 
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-ti-ipc-firmware-common.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-ti-ipc-firmware-common.dtsi
new file mode 100644
index 000000000000..455397227d4a
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-j742s2-ti-ipc-firmware-common.dtsi
@@ -0,0 +1,350 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * Device Tree Source for enabling IPC using TI SDK firmware on J784S4/J742S2 SoCs
+ *
+ * Copyright (C) 2022-2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&reserved_memory {
+	mcu_r5fss0_core1_dma_memory_region: memory@a1000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa1000000 0x00 0x100000>;
+		no-map;
+	};
+
+	mcu_r5fss0_core1_memory_region: memory@a1100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa1100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	main_r5fss0_core0_dma_memory_region: memory@a2000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa2000000 0x00 0x100000>;
+		no-map;
+	};
+
+	main_r5fss0_core0_memory_region: memory@a2100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa2100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	main_r5fss0_core1_dma_memory_region: memory@a3000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa3000000 0x00 0x100000>;
+		no-map;
+	};
+
+	main_r5fss0_core1_memory_region: memory@a3100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa3100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	main_r5fss1_core0_dma_memory_region: memory@a4000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa4000000 0x00 0x100000>;
+		no-map;
+	};
+
+	main_r5fss1_core0_memory_region: memory@a4100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa4100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	main_r5fss1_core1_dma_memory_region: memory@a5000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa5000000 0x00 0x100000>;
+		no-map;
+	};
+
+	main_r5fss1_core1_memory_region: memory@a5100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa5100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	main_r5fss2_core0_dma_memory_region: memory@a6000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa6000000 0x00 0x100000>;
+		no-map;
+	};
+
+	main_r5fss2_core0_memory_region: memory@a6100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa6100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	main_r5fss2_core1_dma_memory_region: memory@a7000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa7000000 0x00 0x100000>;
+		no-map;
+	};
+
+	main_r5fss2_core1_memory_region: memory@a7100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa7100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	c71_0_dma_memory_region: memory@a8000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa8000000 0x00 0x100000>;
+		no-map;
+	};
+
+	c71_0_memory_region: memory@a8100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa8100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	c71_1_dma_memory_region: memory@a9000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa9000000 0x00 0x100000>;
+		no-map;
+	};
+
+	c71_1_memory_region: memory@a9100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xa9100000 0x00 0xf00000>;
+		no-map;
+	};
+
+	c71_2_dma_memory_region: memory@aa000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xaa000000 0x00 0x100000>;
+		no-map;
+	};
+
+	c71_2_memory_region: memory@aa100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xaa100000 0x00 0xf00000>;
+		no-map;
+	};
+};
+
+&mailbox0_cluster0 {
+	status = "okay";
+	interrupts = <436>;
+
+	mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_mcu_r5fss0_core1: mbox-mcu-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster1 {
+	status = "okay";
+	interrupts = <432>;
+
+	mbox_main_r5fss0_core0: mbox-main-r5fss0-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss0_core1: mbox-main-r5fss0-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster2 {
+	status = "okay";
+	interrupts = <428>;
+
+	mbox_main_r5fss1_core0: mbox-main-r5fss1-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss1_core1: mbox-main-r5fss1-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster3 {
+	status = "okay";
+	interrupts = <424>;
+
+	mbox_main_r5fss2_core0: mbox-main-r5fss2-core0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_main_r5fss2_core1: mbox-main-r5fss2-core1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster4 {
+	status = "okay";
+	interrupts = <420>;
+
+	mbox_c71_0: mbox-c71-0 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+
+	mbox_c71_1: mbox-c71-1 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&mailbox0_cluster5 {
+	status = "okay";
+	interrupts = <416>;
+
+	mbox_c71_2: mbox-c71-2 {
+		ti,mbox-rx = <0 0 0>;
+		ti,mbox-tx = <1 0 0>;
+	};
+};
+
+/* Timers are used by Remoteproc firmware */
+&main_timer0 {
+	status = "reserved";
+};
+
+&main_timer1 {
+	status = "reserved";
+};
+
+&main_timer2 {
+	status = "reserved";
+};
+
+&main_timer3 {
+	status = "reserved";
+};
+
+&main_timer4 {
+	status = "reserved";
+};
+
+&main_timer5 {
+	status = "reserved";
+};
+
+&main_timer6 {
+	status = "reserved";
+};
+
+&main_timer7 {
+	status = "reserved";
+};
+
+&main_timer8 {
+	status = "reserved";
+};
+
+&main_timer9 {
+	status = "reserved";
+};
+
+&mcu_r5fss0 {
+	status = "okay";
+};
+
+&mcu_r5fss0_core0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core0>;
+	memory-region = <&mcu_r5fss0_core0_dma_memory_region>,
+			<&mcu_r5fss0_core0_memory_region>;
+};
+
+&mcu_r5fss0_core1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster0 &mbox_mcu_r5fss0_core1>;
+	memory-region = <&mcu_r5fss0_core1_dma_memory_region>,
+			<&mcu_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss0 {
+	ti,cluster-mode = <0>;
+	status = "okay";
+};
+
+&main_r5fss0_core0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core0>;
+	memory-region = <&main_r5fss0_core0_dma_memory_region>,
+			<&main_r5fss0_core0_memory_region>;
+};
+
+&main_r5fss0_core1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster1 &mbox_main_r5fss0_core1>;
+	memory-region = <&main_r5fss0_core1_dma_memory_region>,
+			<&main_r5fss0_core1_memory_region>;
+};
+
+&main_r5fss1 {
+	ti,cluster-mode = <0>;
+	status = "okay";
+};
+
+&main_r5fss1_core0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core0>;
+	memory-region = <&main_r5fss1_core0_dma_memory_region>,
+			<&main_r5fss1_core0_memory_region>;
+};
+
+&main_r5fss1_core1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster2 &mbox_main_r5fss1_core1>;
+	memory-region = <&main_r5fss1_core1_dma_memory_region>,
+			<&main_r5fss1_core1_memory_region>;
+};
+
+&main_r5fss2 {
+	ti,cluster-mode = <0>;
+	status = "okay";
+};
+
+&main_r5fss2_core0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core0>;
+	memory-region = <&main_r5fss2_core0_dma_memory_region>,
+			<&main_r5fss2_core0_memory_region>;
+};
+
+&main_r5fss2_core1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster3 &mbox_main_r5fss2_core1>;
+	memory-region = <&main_r5fss2_core1_dma_memory_region>,
+			<&main_r5fss2_core1_memory_region>;
+};
+
+&c71_0 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster4 &mbox_c71_0>;
+	memory-region = <&c71_0_dma_memory_region>,
+			<&c71_0_memory_region>;
+};
+
+&c71_1 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster4 &mbox_c71_1>;
+	memory-region = <&c71_1_dma_memory_region>,
+			<&c71_1_memory_region>;
+};
+
+&c71_2 {
+	status = "okay";
+	mboxes = <&mailbox0_cluster5 &mbox_c71_2>;
+	memory-region = <&c71_2_dma_memory_region>,
+			<&c71_2_memory_region>;
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j784s4-ti-ipc-firmware.dtsi b/arch/arm64/boot/dts/ti/k3-j784s4-ti-ipc-firmware.dtsi
new file mode 100644
index 000000000000..81b508b9b05e
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j784s4-ti-ipc-firmware.dtsi
@@ -0,0 +1,35 @@
+// SPDX-License-Identifier: GPL-2.0-only OR MIT
+/**
+ * Device Tree Source for enabling IPC using TI SDK firmware on J784S4 SoCs
+ *
+ * Copyright (C) 2022-2025 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+&reserved_memory {
+	c71_3_dma_memory_region: memory@ab000000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xab000000 0x00 0x100000>;
+		no-map;
+	};
+
+	c71_3_memory_region: memory@ab100000 {
+		compatible = "shared-dma-pool";
+		reg = <0x00 0xab100000 0x00 0xf00000>;
+		no-map;
+	};
+};
+
+&mailbox0_cluster5 {
+
+	mbox_c71_3: mbox-c71-3 {
+		ti,mbox-rx = <2 0 0>;
+		ti,mbox-tx = <3 0 0>;
+	};
+};
+
+&c71_3 {
+	mboxes = <&mailbox0_cluster5 &mbox_c71_3>;
+	memory-region = <&c71_3_dma_memory_region>,
+			<&c71_3_memory_region>;
+	status = "okay";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-pinctrl.h b/arch/arm64/boot/dts/ti/k3-pinctrl.h
index c0f09be8d3f9..e46f7bf52701 100644
--- a/arch/arm64/boot/dts/ti/k3-pinctrl.h
+++ b/arch/arm64/boot/dts/ti/k3-pinctrl.h
@@ -3,15 +3,20 @@
  * This header provides constants for pinctrl bindings for TI's K3 SoC
  * family.
  *
- * Copyright (C) 2018-2024 Texas Instruments Incorporated - https://www.ti.com/
+ * Copyright (C) 2018-2025 Texas Instruments Incorporated - https://www.ti.com/
  */
 #ifndef DTS_ARM64_TI_K3_PINCTRL_H
 #define DTS_ARM64_TI_K3_PINCTRL_H
 
+#define WKUP_LVL_EN_SHIFT       (7)
+#define WKUP_LVL_POL_SHIFT      (8)
 #define ST_EN_SHIFT		(14)
 #define PULLUDEN_SHIFT		(16)
 #define PULLTYPESEL_SHIFT	(17)
 #define RXACTIVE_SHIFT		(18)
+#define DRV_STR_SHIFT           (19)
+#define ISO_OVERRIDE_EN_SHIFT   (22)
+#define ISO_BYPASS_EN_SHIFT     (23)
 #define DEBOUNCE_SHIFT		(11)
 #define FORCE_DS_EN_SHIFT	(15)
 #define DS_EN_SHIFT		(24)
@@ -19,6 +24,7 @@
 #define DS_OUT_VAL_SHIFT	(26)
 #define DS_PULLUD_EN_SHIFT	(27)
 #define DS_PULLTYPE_SEL_SHIFT	(28)
+#define WKUP_EN_SHIFT           (29)
 
 /* Schmitt trigger configuration */
 #define ST_DISABLE		(0 << ST_EN_SHIFT)
@@ -33,6 +39,29 @@
 #define INPUT_EN		(1 << RXACTIVE_SHIFT)
 #define INPUT_DISABLE		(0 << RXACTIVE_SHIFT)
 
+#define DS_PULL_DISABLE         (1 << DS_PULLUD_EN_SHIFT)
+#define DS_PULL_ENABLE          (0 << DS_PULLUD_EN_SHIFT)
+
+#define DS_PULL_UP              (1 << DS_PULLTYPE_SEL_SHIFT | DS_PULL_ENABLE)
+#define DS_PULL_DOWN            (0 << DS_PULLTYPE_SEL_SHIFT | DS_PULL_ENABLE)
+
+#define DS_STATE_EN             (1 << DS_EN_SHIFT)
+#define DS_STATE_DISABLE        (0 << DS_EN_SHIFT)
+
+#define DS_INPUT_EN             (1 << DS_OUT_DIS_SHIFT | DS_STATE_EN)
+#define DS_INPUT_DISABLE        (0 << DS_OUT_DIS_SHIFT | DS_STATE_EN)
+
+#define DS_OUT_VALUE_ZERO       (0 << DS_OUT_VAL_SHIFT)
+#define DS_OUT_VALUE_ONE        (1 << DS_OUT_VAL_SHIFT)
+
+/* Configuration to enable wake-up on pin activity */
+#define WKUP_ENABLE             (1 << WKUP_EN_SHIFT)
+#define WKUP_DISABLE            (0 << WKUP_EN_SHIFT)
+#define WKUP_ON_LEVEL           (1 << WKUP_LVL_EN_SHIFT)
+#define WKUP_ON_EDGE            (0 << WKUP_LVL_EN_SHIFT)
+#define WKUP_LEVEL_LOW          (0 << WKUP_LVL_POL_SHIFT)
+#define WKUP_LEVEL_HIGH         (1 << WKUP_LVL_POL_SHIFT)
+
 /* Only these macros are expected be used directly in device tree files */
 #define PIN_OUTPUT		(INPUT_DISABLE | PULL_DISABLE)
 #define PIN_OUTPUT_PULLUP	(INPUT_DISABLE | PULL_UP)
@@ -53,10 +82,14 @@
 #define PIN_DEBOUNCE_CONF5	(5 << DEBOUNCE_SHIFT)
 #define PIN_DEBOUNCE_CONF6	(6 << DEBOUNCE_SHIFT)
 
+#define PIN_DRIVE_STRENGTH_NOMINAL      (0 << DRV_STR_SHIFT)
+#define PIN_DRIVE_STRENGTH_SLOW         (1 << DRV_STR_SHIFT)
+#define PIN_DRIVE_STRENGTH_FAST         (2 << DRV_STR_SHIFT)
+
 #define PIN_DS_FORCE_DISABLE		(0 << FORCE_DS_EN_SHIFT)
 #define PIN_DS_FORCE_ENABLE		(1 << FORCE_DS_EN_SHIFT)
-#define PIN_DS_IO_OVERRIDE_DISABLE	(0 << DS_IO_OVERRIDE_EN_SHIFT)
-#define PIN_DS_IO_OVERRIDE_ENABLE	(1 << DS_IO_OVERRIDE_EN_SHIFT)
+#define PIN_DS_ISO_OVERRIDE_DISABLE     (0 << ISO_OVERRIDE_EN_SHIFT)
+#define PIN_DS_ISO_OVERRIDE_ENABLE      (1 << ISO_OVERRIDE_EN_SHIFT)
 #define PIN_DS_OUT_ENABLE		(0 << DS_OUT_DIS_SHIFT)
 #define PIN_DS_OUT_DISABLE		(1 << DS_OUT_DIS_SHIFT)
 #define PIN_DS_OUT_VALUE_ZERO		(0 << DS_OUT_VAL_SHIFT)
@@ -65,6 +98,18 @@
 #define PIN_DS_PULLUD_DISABLE		(1 << DS_PULLUD_EN_SHIFT)
 #define PIN_DS_PULL_DOWN		(0 << DS_PULLTYPE_SEL_SHIFT)
 #define PIN_DS_PULL_UP			(1 << DS_PULLTYPE_SEL_SHIFT)
+#define PIN_DS_ISO_BYPASS               (1 << ISO_BYPASS_EN_SHIFT)
+#define PIN_DS_ISO_BYPASS_DISABLE       (0 << ISO_BYPASS_EN_SHIFT)
+
+#define PIN_DS_OUTPUT_LOW               (DS_INPUT_DISABLE | DS_OUT_VALUE_ZERO)
+#define PIN_DS_OUTPUT_HIGH              (DS_INPUT_DISABLE | DS_OUT_VALUE_ONE)
+#define PIN_DS_INPUT                    (DS_INPUT_EN | DS_PULL_DISABLE)
+#define PIN_DS_INPUT_PULLUP             (DS_INPUT_EN | DS_PULL_UP)
+#define PIN_DS_INPUT_PULLDOWN           (DS_INPUT_EN | DS_PULL_DOWN)
+
+#define PIN_WKUP_EN_LEVEL_LOW           (WKUP_ENABLE | WKUP_ON_LEVEL | WKUP_LEVEL_LOW)
+#define PIN_WKUP_EN_LEVEL_HIGH          (WKUP_ENABLE | WKUP_ON_LEVEL | WKUP_LEVEL_HIGH)
+#define PIN_WKUP_EN                     (WKUP_ENABLE | WKUP_ON_EDGE)
 
 /* Default mux configuration for gpio-ranges to use with pinctrl */
 #define PIN_GPIO_RANGE_IOPAD	(PIN_INPUT | 7)
diff --git a/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi
index 39806f0ae513..9aa7b1872bd6 100644
--- a/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi
+++ b/arch/arm64/boot/dts/toshiba/tmpv7708.dtsi
@@ -152,6 +152,7 @@
 		gic: interrupt-controller@24001000 {
 			compatible = "arm,gic-400";
 			interrupt-controller;
+			#address-cells = <0>;
 			#interrupt-cells = <3>;
 			interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(8) | IRQ_TYPE_LEVEL_LOW)>;
 			reg = <0 0x24001000 0 0x1000>,
diff --git a/arch/arm64/boot/dts/xilinx/Makefile b/arch/arm64/boot/dts/xilinx/Makefile
index 7f5a8801cad1..70fac0b276df 100644
--- a/arch/arm64/boot/dts/xilinx/Makefile
+++ b/arch/arm64/boot/dts/xilinx/Makefile
@@ -30,4 +30,28 @@ dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA-sck-kv-g-revA.dtb
 zynqmp-smk-k26-revA-sck-kv-g-revB-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kv-g-revB.dtbo
 dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA-sck-kv-g-revB.dtb
 
+zynqmp-sm-k26-revA-sck-kr-g-revA-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kr-g-revA.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k26-revA-sck-kr-g-revA.dtb
+zynqmp-sm-k26-revA-sck-kr-g-revB-dtbs := zynqmp-sm-k26-revA.dtb zynqmp-sck-kr-g-revB.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k26-revA-sck-kr-g-revB.dtb
+zynqmp-smk-k26-revA-sck-kr-g-revA-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kr-g-revA.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA-sck-kr-g-revA.dtb
+zynqmp-smk-k26-revA-sck-kr-g-revB-dtbs := zynqmp-smk-k26-revA.dtb zynqmp-sck-kr-g-revB.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k26-revA-sck-kr-g-revB.dtb
+
+zynqmp-sm-k24-revA-sck-kd-g-revA-dtbs := zynqmp-sm-k24-revA.dtb zynqmp-sck-kd-g-revA.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k24-revA-sck-kd-g-revA.dtb
+zynqmp-smk-k24-revA-sck-kd-g-revA-dtbs := zynqmp-smk-k24-revA.dtb zynqmp-sck-kd-g-revA.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k24-revA-sck-kd-g-revA.dtb
+
+zynqmp-sm-k24-revA-sck-kv-g-revB-dtbs := zynqmp-sm-k24-revA.dtb zynqmp-sck-kv-g-revB.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k24-revA-sck-kv-g-revB.dtb
+zynqmp-smk-k24-revA-sck-kv-g-revB-dtbs := zynqmp-smk-k24-revA.dtb zynqmp-sck-kv-g-revB.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k24-revA-sck-kv-g-revB.dtb
+
+zynqmp-sm-k24-revA-sck-kr-g-revB-dtbs := zynqmp-sm-k24-revA.dtb zynqmp-sck-kr-g-revB.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-sm-k24-revA-sck-kr-g-revB.dtb
+zynqmp-smk-k24-revA-sck-kr-g-revB-dtbs := zynqmp-smk-k24-revA.dtb zynqmp-sck-kr-g-revB.dtbo
+dtb-$(CONFIG_ARCH_ZYNQMP) += zynqmp-smk-k24-revA-sck-kr-g-revB.dtb
+
 dtb-$(CONFIG_ARCH_ZYNQMP) += versal-net-vn-x-b2197-01-revA.dtb
diff --git a/arch/arm64/boot/dts/xilinx/versal-net.dtsi b/arch/arm64/boot/dts/xilinx/versal-net.dtsi
index fc9f49e57385..412af9a394aa 100644
--- a/arch/arm64/boot/dts/xilinx/versal-net.dtsi
+++ b/arch/arm64/boot/dts/xilinx/versal-net.dtsi
@@ -104,6 +104,28 @@
 			reg = <0>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP_0>;
+			d-cache-size = <0x10000>; /* 64kB */
+			d-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			d-cache-sets = <256>;
+			i-cache-size = <0x10000>; /* 64kB */
+			i-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			i-cache-sets = <256>;
+			next-level-cache = <&l2_00>;
+			l2_00: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x80000>; /* 512kB */
+				cache-line-size = <64>;
+				/* 8 ways set associativity */
+				/* cache_size / (line_size/associativity) */
+				cache-sets = <1024>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
 		};
 		cpu100: cpu@100 {
 			compatible = "arm,cortex-a78";
@@ -112,6 +134,28 @@
 			reg = <0x100>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP_0>;
+			d-cache-size = <0x10000>; /* 64kB */
+			d-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			d-cache-sets = <256>;
+			i-cache-size = <0x10000>; /* 64kB */
+			i-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			i-cache-sets = <256>;
+			next-level-cache = <&l2_01>;
+			l2_01: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x80000>; /* 512kB */
+				cache-line-size = <64>;
+				/* 8 ways set associativity */
+				/* cache_size / (line_size/associativity) */
+				cache-sets = <1024>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
 		};
 		cpu200: cpu@200 {
 			compatible = "arm,cortex-a78";
@@ -120,6 +164,28 @@
 			reg = <0x200>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP_0>;
+			d-cache-size = <0x10000>; /* 64kB */
+			d-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			d-cache-sets = <256>;
+			i-cache-size = <0x10000>; /* 64kB */
+			i-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			i-cache-sets = <256>;
+			next-level-cache = <&l2_02>;
+			l2_02: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x80000>; /* 512kB */
+				cache-line-size = <64>;
+				/* 8 ways set associativity */
+				/* cache_size / (line_size/associativity) */
+				cache-sets = <1024>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
 		};
 		cpu300: cpu@300 {
 			compatible = "arm,cortex-a78";
@@ -128,6 +194,28 @@
 			reg = <0x300>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP_0>;
+			d-cache-size = <0x10000>; /* 64kB */
+			d-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			d-cache-sets = <256>;
+			i-cache-size = <0x10000>; /* 64kB */
+			i-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			i-cache-sets = <256>;
+			next-level-cache = <&l2_03>;
+			l2_03: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x80000>; /* 512kB */
+				cache-line-size = <64>;
+				/* 8 ways set associativity */
+				/* cache_size / (line_size/associativity) */
+				cache-sets = <1024>;
+				cache-unified;
+				next-level-cache = <&l3_0>;
+			};
 		};
 		cpu10000: cpu@10000 {
 			compatible = "arm,cortex-a78";
@@ -136,6 +224,28 @@
 			reg = <0x10000>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP_0>;
+			d-cache-size = <0x10000>; /* 64kB */
+			d-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			d-cache-sets = <256>;
+			i-cache-size = <0x10000>; /* 64kB */
+			i-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			i-cache-sets = <256>;
+			next-level-cache = <&l2_10>;
+			l2_10: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x80000>; /* 512kB */
+				cache-line-size = <64>;
+				/* 8 ways set associativity */
+				/* cache_size / (line_size/associativity) */
+				cache-sets = <1024>;
+				cache-unified;
+				next-level-cache = <&l3_1>;
+			};
 		};
 		cpu10100: cpu@10100 {
 			compatible = "arm,cortex-a78";
@@ -144,6 +254,28 @@
 			reg = <0x10100>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP_0>;
+			d-cache-size = <0x10000>; /* 64kB */
+			d-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			d-cache-sets = <256>;
+			i-cache-size = <0x10000>; /* 64kB */
+			i-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			i-cache-sets = <256>;
+			next-level-cache = <&l2_11>;
+			l2_11: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x80000>; /* 512kB */
+				cache-line-size = <64>;
+				/* 8 ways set associativity */
+				/* cache_size / (line_size/associativity) */
+				cache-sets = <1024>;
+				cache-unified;
+				next-level-cache = <&l3_1>;
+			};
 		};
 		cpu10200: cpu@10200 {
 			compatible = "arm,cortex-a78";
@@ -152,6 +284,28 @@
 			reg = <0x10200>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP_0>;
+			d-cache-size = <0x10000>; /* 64kB */
+			d-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			d-cache-sets = <256>;
+			i-cache-size = <0x10000>; /* 64kB */
+			i-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			i-cache-sets = <256>;
+			next-level-cache = <&l2_12>;
+			l2_12: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x80000>; /* 512kB */
+				cache-line-size = <64>;
+				/* 8 ways set associativity */
+				/* cache_size / (line_size/associativity) */
+				cache-sets = <1024>;
+				cache-unified;
+				next-level-cache = <&l3_1>;
+			};
 		};
 		cpu10300: cpu@10300 {
 			compatible = "arm,cortex-a78";
@@ -160,6 +314,28 @@
 			reg = <0x10300>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP_0>;
+			d-cache-size = <0x10000>; /* 64kB */
+			d-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			d-cache-sets = <256>;
+			i-cache-size = <0x10000>; /* 64kB */
+			i-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			i-cache-sets = <256>;
+			next-level-cache = <&l2_13>;
+			l2_13: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x80000>; /* 512kB */
+				cache-line-size = <64>;
+				/* 8 ways set associativity */
+				/* cache_size / (line_size/associativity) */
+				cache-sets = <1024>;
+				cache-unified;
+				next-level-cache = <&l3_1>;
+			};
 		};
 		cpu20000: cpu@20000 {
 			compatible = "arm,cortex-a78";
@@ -168,6 +344,28 @@
 			reg = <0x20000>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP_0>;
+			d-cache-size = <0x10000>; /* 64kB */
+			d-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			d-cache-sets = <256>;
+			i-cache-size = <0x10000>; /* 64kB */
+			i-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			i-cache-sets = <256>;
+			next-level-cache = <&l2_20>;
+			l2_20: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x80000>; /* 512kB */
+				cache-line-size = <64>;
+				/* 8 ways set associativity */
+				/* cache_size / (line_size/associativity) */
+				cache-sets = <1024>;
+				cache-unified;
+				next-level-cache = <&l3_2>;
+			};
 		};
 		cpu20100: cpu@20100 {
 			compatible = "arm,cortex-a78";
@@ -176,6 +374,28 @@
 			reg = <0x20100>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP_0>;
+			d-cache-size = <0x10000>; /* 64kB */
+			d-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			d-cache-sets = <256>;
+			i-cache-size = <0x10000>; /* 64kB */
+			i-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			i-cache-sets = <256>;
+			next-level-cache = <&l2_21>;
+			l2_21: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x80000>; /* 512kB */
+				cache-line-size = <64>;
+				/* 8 ways set associativity */
+				/* cache_size / (line_size/associativity) */
+				cache-sets = <1024>;
+				cache-unified;
+				next-level-cache = <&l3_2>;
+			};
 		};
 		cpu20200: cpu@20200 {
 			compatible = "arm,cortex-a78";
@@ -184,6 +404,28 @@
 			reg = <0x20200>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP_0>;
+			d-cache-size = <0x10000>; /* 64kB */
+			d-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			d-cache-sets = <256>;
+			i-cache-size = <0x10000>; /* 64kB */
+			i-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			i-cache-sets = <256>;
+			next-level-cache = <&l2_22>;
+			l2_22: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x80000>; /* 512kB */
+				cache-line-size = <64>;
+				/* 8 ways set associativity */
+				/* cache_size / (line_size/associativity) */
+				cache-sets = <1024>;
+				cache-unified;
+				next-level-cache = <&l3_2>;
+			};
 		};
 		cpu20300: cpu@20300 {
 			compatible = "arm,cortex-a78";
@@ -192,6 +434,28 @@
 			reg = <0x20300>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP_0>;
+			d-cache-size = <0x10000>; /* 64kB */
+			d-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			d-cache-sets = <256>;
+			i-cache-size = <0x10000>; /* 64kB */
+			i-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			i-cache-sets = <256>;
+			next-level-cache = <&l2_23>;
+			l2_23: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x80000>; /* 512kB */
+				cache-line-size = <64>;
+				/* 8 ways set associativity */
+				/* cache_size / (line_size/associativity) */
+				cache-sets = <1024>;
+				cache-unified;
+				next-level-cache = <&l3_2>;
+			};
 		};
 		cpu30000: cpu@30000 {
 			compatible = "arm,cortex-a78";
@@ -200,6 +464,28 @@
 			reg = <0x30000>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP_0>;
+			d-cache-size = <0x10000>; /* 64kB */
+			d-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			d-cache-sets = <256>;
+			i-cache-size = <0x10000>; /* 64kB */
+			i-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			i-cache-sets = <256>;
+			next-level-cache = <&l2_30>;
+			l2_30: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x80000>; /* 512kB */
+				cache-line-size = <64>;
+				/* 8 ways set associativity */
+				/* cache_size / (line_size/associativity) */
+				cache-sets = <1024>;
+				cache-unified;
+				next-level-cache = <&l3_3>;
+			};
 		};
 		cpu30100: cpu@30100 {
 			compatible = "arm,cortex-a78";
@@ -208,6 +494,28 @@
 			reg = <0x30100>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP_0>;
+			d-cache-size = <0x10000>; /* 64kB */
+			d-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			d-cache-sets = <256>;
+			i-cache-size = <0x10000>; /* 64kB */
+			i-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			i-cache-sets = <256>;
+			next-level-cache = <&l2_31>;
+			l2_31: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x80000>; /* 512kB */
+				cache-line-size = <64>;
+				/* 8 ways set associativity */
+				/* cache_size / (line_size/associativity) */
+				cache-sets = <1024>;
+				cache-unified;
+				next-level-cache = <&l3_3>;
+			};
 		};
 		cpu30200: cpu@30200 {
 			compatible = "arm,cortex-a78";
@@ -216,6 +524,28 @@
 			reg = <0x30200>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP_0>;
+			d-cache-size = <0x10000>; /* 64kB */
+			d-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			d-cache-sets = <256>;
+			i-cache-size = <0x10000>; /* 64kB */
+			i-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			i-cache-sets = <256>;
+			next-level-cache = <&l2_32>;
+			l2_32: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x80000>; /* 512kB */
+				cache-line-size = <64>;
+				/* 8 ways set associativity */
+				/* cache_size / (line_size/associativity) */
+				cache-sets = <1024>;
+				cache-unified;
+				next-level-cache = <&l3_3>;
+			};
 		};
 		cpu30300: cpu@30300 {
 			compatible = "arm,cortex-a78";
@@ -224,7 +554,85 @@
 			reg = <0x30300>;
 			operating-points-v2 = <&cpu_opp_table>;
 			cpu-idle-states = <&CPU_SLEEP_0>;
+			d-cache-size = <0x10000>; /* 64kB */
+			d-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			d-cache-sets = <256>;
+			i-cache-size = <0x10000>; /* 64kB */
+			i-cache-line-size = <64>;
+			/* 4 ways set associativity */
+			/* cache_size / (line_size / associativity) */
+			i-cache-sets = <256>;
+			next-level-cache = <&l2_33>;
+			l2_33: l2-cache {
+				compatible = "cache";
+				cache-level = <2>;
+				cache-size = <0x80000>; /* 512kB */
+				cache-line-size = <64>;
+				/* 8 ways set associativity */
+				/* cache_size / (line_size/associativity) */
+				cache-sets = <1024>;
+				cache-unified;
+				next-level-cache = <&l3_3>;
+			};
+		};
+
+		l3_0: l3-0-cache { /* cluster private */
+			compatible = "cache";
+			cache-level = <3>;
+			cache-size = <0x200000>; /* 2MB */
+			cache-line-size = <64>;
+			/* 16 ways set associativity */
+			/* cache_size / (line_size/associativity) */
+			cache-sets = <2048>;
+			cache-unified;
+			next-level-cache = <&llc>;
+		};
+
+		l3_1: l3-1-cache { /* cluster private */
+			compatible = "cache";
+			cache-level = <3>;
+			cache-size = <0x200000>; /* 2MB */
+			cache-line-size = <64>;
+			/* 16 ways set associativity */
+			/* cache_size / (line_size/associativity) */
+			cache-sets = <2048>;
+			cache-unified;
+			next-level-cache = <&llc>;
+		};
+
+		l3_2: l3-2-cache { /* cluster private */
+			compatible = "cache";
+			cache-level = <3>;
+			cache-size = <0x200000>; /* 2MB */
+			cache-line-size = <64>;
+			/* 16 ways set associativity */
+			/* cache_size / (line_size/associativity) */
+			cache-sets = <2048>;
+			cache-unified;
+			next-level-cache = <&llc>;
+		};
+
+		l3_3: l3-3-cache { /* cluster private */
+			compatible = "cache";
+			cache-level = <3>;
+			cache-size = <0x200000>; /* 2MB */
+			cache-line-size = <64>;
+			/* 16 ways set associativity */
+			/* cache_size / (line_size/associativity) */
+			cache-sets = <2048>;
+			cache-unified;
+			next-level-cache = <&llc>;
+		};
+
+		llc: l4-cache { /* LLC inside CMN */
+			compatible = "cache";
+			cache-level = <4>;
+			cache-size = <0x1000000>; /* 16MB */
+			cache-unified;
 		};
+
 		idle-states {
 			entry-method = "psci";
 
@@ -556,7 +964,7 @@
 			reg = <0 0xf12a0000 0 0x100>;
 			interrupts = <0 200 4>, <0 201 4>;
 			interrupt-names = "alarm", "sec";
-			calibration = <0x8000>;
+			calibration = <0x7FFF>;
 		};
 
 		sdhci0: mmc@f1040000 {
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kd-g-revA.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kd-g-revA.dtso
new file mode 100644
index 000000000000..02be5e1e8686
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kd-g-revA.dtso
@@ -0,0 +1,390 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for KD240 revA Carrier Card
+ *
+ * Copyright (C) 2021 - 2022, Xilinx, Inc.
+ * Copyright (C) 2022 - 2023, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "xlnx,zynqmp-sk-kd240-rev1",
+		     "xlnx,zynqmp-sk-kd240-revB",
+		     "xlnx,zynqmp-sk-kd240-revA",
+		     "xlnx,zynqmp-sk-kd240", "xlnx,zynqmp";
+	model = "ZynqMP KD240 revA/B/1";
+
+	aliases {
+		ethernet0 = "/axi/ethernet@ff0c0000"; /* &gem1 */
+	};
+
+	ina260-u3 {
+		compatible = "iio-hwmon";
+		io-channels = <&u3 0>, <&u3 1>, <&u3 2>;
+	};
+
+	clk_26: clock2 { /* u17 - USB */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	clk_25_0: clock4 { /* u92/u91 - GEM2 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	clk_25_1: clock5 { /* u92/u91 - GEM3 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+};
+
+&can0 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can0_default>;
+};
+
+&i2c1 { /* I2C_SCK C26/C27 - MIO from SOM */
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	u3: ina260@40 { /* u3 */
+		compatible = "ti,ina260";
+		#io-channel-cells = <1>;
+		label = "ina260-u14";
+		reg = <0x40>;
+	};
+
+	slg7xl45106: gpio@11 { /* u13 - reset logic */
+		compatible = "dlg,slg7xl45106";
+		reg = <0x11>;
+		label = "resetchip";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "USB0_PHY_RESET_B", "",
+				  "SD_RESET_B", "USB0_HUB_RESET_B",
+				  "", "PS_GEM0_RESET_B",
+				  "", "";
+	};
+
+	hub: usb-hub@2d { /* u36 */
+		compatible = "microchip,usb5744";
+		reg = <0x2d>;
+	};
+};
+
+/* USB 3.0 */
+&psgtr {
+	status = "okay";
+	/* usb */
+	clocks = <&clk_26>;
+	clock-names = "ref2";
+};
+
+&usb0 { /* mio52 - mio63 */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+	reset-gpios = <&slg7xl45106 0 GPIO_ACTIVE_LOW>;
+	assigned-clock-rates = <250000000>, <20000000>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
+	maximum-speed = "super-speed";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 2.0 hub on port 1 */
+	hub_2_0: hub@1 {
+		compatible = "usb424,2744";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		i2c-bus = <&hub>;
+		reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
+	};
+
+	/* 3.0 hub on port 2 */
+	hub_3_0: hub@2 {
+		compatible = "usb424,5744";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		i2c-bus = <&hub>;
+		reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&gem1 { /* mdio mio50/51 */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem1_default>;
+	assigned-clock-rates = <250000000>;
+
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@8 { /* Adin u31 */
+			#phy-cells = <1>;
+			compatible = "ethernet-phy-id0283.bc30";
+			reg = <8>;
+			adi,rx-internal-delay-ps = <2000>;
+			adi,tx-internal-delay-ps = <2000>;
+			adi,fifo-depth-bits = <8>;
+			reset-assert-us = <10>;
+			reset-deassert-us = <5000>;
+			reset-gpios = <&gpio 77 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+/* 2 more ethernet phys u32@2 and u34@3 */
+
+&pinctrl0 { /* required by spec */
+	status = "okay";
+
+	pinctrl_can0_default: can0-default {
+		mux {
+			function = "can0";
+			groups = "can0_16_grp";
+		};
+
+		conf {
+			groups = "can0_16_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO66";
+			bias-pull-up;
+		};
+
+		conf-tx {
+			pins = "MIO67";
+			bias-pull-up;
+			drive-strength = <4>;
+		};
+	};
+
+	pinctrl_uart0_default: uart0-default {
+		conf {
+			groups = "uart0_17_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO70";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO71";
+			bias-disable;
+		};
+
+		mux {
+			groups = "uart0_17_grp";
+			function = "uart0";
+		};
+	};
+
+	pinctrl_uart1_default: uart1-default {
+		conf {
+			groups = "uart1_9_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO37";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO36";
+			bias-disable;
+			output-enable;
+		};
+
+		mux {
+			groups = "uart1_9_grp";
+			function = "uart1";
+		};
+	};
+
+	pinctrl_i2c1_default: i2c1-default {
+		conf {
+			groups = "i2c1_6_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux {
+			groups = "i2c1_6_grp";
+			function = "i2c1";
+		};
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
+		conf {
+			groups = "gpio0_24_grp", "gpio0_25_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux {
+			groups = "gpio0_24_grp", "gpio0_25_grp";
+			function = "gpio0";
+		};
+	};
+
+	pinctrl_gem1_default: gem1-default {
+		conf {
+			groups = "ethernet1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO45", "MIO46", "MIO47", "MIO48";
+			bias-disable;
+			low-power-disable;
+		};
+
+		conf-bootstrap {
+			pins = "MIO44", "MIO49";
+			bias-disable;
+			output-enable;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO38", "MIO39", "MIO40",
+				"MIO41", "MIO42", "MIO43";
+			bias-disable;
+			output-enable;
+			low-power-enable;
+		};
+
+		conf-mdio {
+			groups = "mdio1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+			output-enable;
+		};
+
+		mux-mdio {
+			function = "mdio1";
+			groups = "mdio1_0_grp";
+		};
+
+		mux {
+			function = "ethernet1";
+			groups = "ethernet1_0_grp";
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		conf {
+			groups = "usb0_0_grp";
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO52", "MIO53", "MIO55";
+			bias-high-impedance;
+			drive-strength = <12>;
+			slew-rate = <SLEW_RATE_FAST>;
+		};
+
+		conf-tx {
+			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+			"MIO60", "MIO61", "MIO62", "MIO63";
+			bias-disable;
+			output-enable;
+			drive-strength = <4>;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+	};
+
+	pinctrl_usb1_default: usb1-default {
+		conf {
+			groups = "usb1_0_grp";
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO64", "MIO65", "MIO67";
+			bias-high-impedance;
+			drive-strength = <12>;
+			slew-rate = <SLEW_RATE_FAST>;
+		};
+
+		conf-tx {
+			pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71",
+			"MIO72", "MIO73", "MIO74", "MIO75";
+			bias-disable;
+			output-enable;
+			drive-strength = <4>;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+
+		mux {
+			groups = "usb1_0_grp";
+			function = "usb1";
+		};
+	};
+};
+
+&uart0 {
+	status = "okay";
+	rts-gpios = <&gpio 72 GPIO_ACTIVE_HIGH>;
+	linux,rs485-enabled-at-boot-time;
+	rs485-rts-delay = <10 10>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart0_default>;
+	assigned-clock-rates = <100000000>;
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
+
+&zynqmp_dpsub {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revA.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revA.dtso
new file mode 100644
index 000000000000..b92dcb86e87e
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revA.dtso
@@ -0,0 +1,455 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for KR260 revA Carrier Card
+ *
+ * (C) Copyright 2021, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "xlnx,zynqmp-sk-kr260-revA",
+		     "xlnx,zynqmp-sk-kr260", "xlnx,zynqmp";
+	model = "ZynqMP KR260 revA";
+
+	aliases {
+		ethernet0 = "/axi/ethernet@ff0b0000"; /* &gem0 */
+		ethernet1 = "/axi/ethernet@ff0c0000"; /* &gem1 */
+	};
+
+	ina260-u14 {
+		compatible = "iio-hwmon";
+		io-channels = <&u14 0>, <&u14 1>, <&u14 2>;
+	};
+
+	clk_27: clock0 { /* u86 - DP */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+
+	clk_125: si5332-0 { /* u17 - GEM0/1 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+
+	clk_74: si5332-5 { /* u17 - SLVC-EC */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
+
+	clk_26: si5332-2 { /* u17 - USB */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	clk_156: si5332-3 { /* u17 - SFP+ */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <156250000>;
+	};
+
+	clk_25_0: si5332-1 { /* u17 - GEM2 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	clk_25_1: si5332-4 { /* u17 - GEM3 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+	dpcon {
+		compatible = "dp-connector";
+		label = "P11";
+		type = "full-size";
+
+		port {
+			dpcon_in: endpoint {
+				remote-endpoint = <&dpsub_dp_out>;
+			};
+		};
+	};
+};
+
+&i2c1 { /* I2C_SCK C26/C27 - MIO from SOM */
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	u14: ina260@40 { /* u14 */
+		compatible = "ti,ina260";
+		#io-channel-cells = <1>;
+		label = "ina260-u14";
+		reg = <0x40>;
+	};
+
+	slg7xl45106: gpio@11 { /* u19 - reset logic */
+		compatible = "dlg,slg7xl45106";
+		reg = <0x11>;
+		label = "resetchip";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "USB0_PHY_RESET_B", "USB1_PHY_RESET_B",
+				  "SD_RESET_B", "USB0_HUB_RESET_B",
+				  "USB1_HUB_RESET_B", "PS_GEM0_RESET_B",
+				  "PS_GEM1_RESET_B", "";
+	};
+
+	i2c-mux@74 { /* u18 */
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+		usbhub_i2c0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			hub_1: usb-hub@2d {
+				compatible = "microchip,usb5744";
+				reg = <0x2d>;
+			};
+		};
+		usbhub_i2c1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			hub_2: usb-hub@2d {
+				compatible = "microchip,usb5744";
+				reg = <0x2d>;
+			};
+		};
+		/* Bus 2/3 are not connected */
+	};
+
+	/* si5332@6a - u17 - clock-generator */
+};
+
+/* GEM SGMII/DP and USB 3.0 */
+&psgtr {
+	status = "okay";
+	/* gem0/1, dp, usb */
+	clocks = <&clk_125>, <&clk_27>, <&clk_26>;
+	clock-names = "ref0", "ref1", "ref2";
+};
+
+&zynqmp_dpsub {
+	status = "okay";
+	phy-names = "dp-phy0";
+	phys = <&psgtr 1 PHY_TYPE_DP 0 1>;
+	assigned-clock-rates = <27000000>, <25000000>, <300000000>;
+};
+
+&out_dp {
+	dpsub_dp_out: endpoint {
+		remote-endpoint = <&dpcon_in>;
+	};
+};
+
+&zynqmp_dpdma {
+	status = "okay";
+	assigned-clock-rates = <600000000>;
+};
+
+&usb0 { /* mio52 - mio63 */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+	reset-gpios = <&slg7xl45106 0 GPIO_ACTIVE_LOW>;
+	assigned-clock-rates = <250000000>, <20000000>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
+	maximum-speed = "super-speed";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 2.0 hub on port 1 */
+	hub_2_0: hub@1 {
+		compatible = "usb424,2744";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		i2c-bus = <&hub_1>;
+		reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
+	};
+
+	/* 3.0 hub on port 2 */
+	hub_3_0: hub@2 {
+		compatible = "usb424,5744";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		i2c-bus = <&hub_1>;
+		reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&usb1 { /* mio64 - mio75 */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 3 PHY_TYPE_USB3 1 2>;
+	reset-gpios = <&slg7xl45106 1 GPIO_ACTIVE_LOW>;
+	assigned-clock-rates = <250000000>, <20000000>;
+};
+
+&dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
+	maximum-speed = "super-speed";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 2.0 hub on port 1 */
+	hub1_2_0: hub@1 {
+		compatible = "usb424,2744";
+		reg = <1>;
+		peer-hub = <&hub1_3_0>;
+		i2c-bus = <&hub_2>;
+		reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>;
+	};
+
+	/* 3.0 hub on port 2 */
+	hub1_3_0: hub@2 {
+		compatible = "usb424,5744";
+		reg = <2>;
+		peer-hub = <&hub1_2_0>;
+		i2c-bus = <&hub_2>;
+		reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&gem0 { /* mdio mio50/51 */
+	status = "okay";
+	phys = <&psgtr 0 PHY_TYPE_SGMII 0 0>;
+	phy-handle = <&phy0>;
+	phy-mode = "sgmii";
+	assigned-clock-rates = <250000000>;
+};
+
+&gem1 { /* mdio mio50/51, gem mio38 - mio49 */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem1_default>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	assigned-clock-rates = <250000000>;
+
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@4 { /* u81 */
+			#phy-cells = <1>;
+			compatible = "ethernet-phy-id2000.a231";
+			reg = <4>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			reset-assert-us = <300>;
+			reset-deassert-us = <280>;
+			reset-gpios = <&slg7xl45106 5 GPIO_ACTIVE_LOW>;
+		};
+		phy1: ethernet-phy@8 { /* u36 */
+			#phy-cells = <1>;
+			compatible = "ethernet-phy-id2000.a231";
+			reg = <8>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			reset-assert-us = <100>;
+			reset-deassert-us = <280>;
+			reset-gpios = <&slg7xl45106 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+/* gem2/gem3 via PL with phys u79@2 and u80@3 */
+
+&pinctrl0 {
+	status = "okay";
+
+	pinctrl_uart1_default: uart1-default {
+		conf {
+			groups = "uart1_9_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO37";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO36";
+			bias-disable;
+			output-enable;
+		};
+
+		mux {
+			groups = "uart1_9_grp";
+			function = "uart1";
+		};
+	};
+
+	pinctrl_i2c1_default: i2c1-default {
+		conf {
+			groups = "i2c1_6_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux {
+			groups = "i2c1_6_grp";
+			function = "i2c1";
+		};
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
+		conf {
+			groups = "gpio0_24_grp", "gpio0_25_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux {
+			groups = "gpio0_24_grp", "gpio0_25_grp";
+			function = "gpio0";
+		};
+	};
+
+	pinctrl_gem1_default: gem1-default {
+		conf {
+			groups = "ethernet1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO44", "MIO46", "MIO48";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-bootstrap {
+			pins = "MIO45", "MIO47", "MIO49";
+			bias-disable;
+			output-enable;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO38", "MIO39", "MIO40",
+				"MIO41", "MIO42", "MIO43";
+			bias-disable;
+			output-enable;
+			low-power-enable;
+		};
+
+		conf-mdio {
+			groups = "mdio1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+			output-enable;
+		};
+
+		mux-mdio {
+			function = "mdio1";
+			groups = "mdio1_0_grp";
+		};
+
+		mux {
+			function = "ethernet1";
+			groups = "ethernet1_0_grp";
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		conf {
+			groups = "usb0_0_grp";
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO52", "MIO53", "MIO55";
+			bias-high-impedance;
+			drive-strength = <12>;
+			slew-rate = <SLEW_RATE_FAST>;
+		};
+
+		conf-tx {
+			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+			"MIO60", "MIO61", "MIO62", "MIO63";
+			bias-disable;
+			output-enable;
+			drive-strength = <4>;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+	};
+
+	pinctrl_usb1_default: usb1-default {
+		conf {
+			groups = "usb1_0_grp";
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO64", "MIO65", "MIO67";
+			bias-high-impedance;
+			drive-strength = <12>;
+			slew-rate = <SLEW_RATE_FAST>;
+		};
+
+		conf-tx {
+			pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71",
+			"MIO72", "MIO73", "MIO74", "MIO75";
+			bias-disable;
+			output-enable;
+			drive-strength = <4>;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+
+		mux {
+			groups = "usb1_0_grp";
+			function = "usb1";
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revB.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revB.dtso
new file mode 100644
index 000000000000..99ad220d13d6
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kr-g-revB.dtso
@@ -0,0 +1,456 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for KR260 revB Carrier Card (A03 revision)
+ *
+ * (C) Copyright 2021 - 2022, Xilinx, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/pinctrl/pinctrl-zynqmp.h>
+
+/dts-v1/;
+/plugin/;
+
+&{/} {
+	compatible = "xlnx,zynqmp-sk-kr260-revB",
+		     "xlnx,zynqmp-sk-kr260", "xlnx,zynqmp";
+	model = "ZynqMP KR260 revB";
+
+	aliases {
+		ethernet0 = "/axi/ethernet@ff0b0000"; /* &gem0 */
+		ethernet1 = "/axi/ethernet@ff0c0000"; /* &gem1 */
+	};
+
+	ina260-u14 {
+		compatible = "iio-hwmon";
+		io-channels = <&u14 0>, <&u14 1>, <&u14 2>;
+	};
+
+	clk_125: clock0 { /* u87 - GEM0/1 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <125000000>;
+	};
+
+	clk_27: clock1 { /* u86 - DP */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <27000000>;
+	};
+
+	clk_26: clock2 { /* u89 - USB */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <26000000>;
+	};
+
+	clk_156: clock3 { /* u90 - SFP+ */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <156250000>;
+	};
+
+	clk_25_0: clock4 { /* u92/u91 - GEM2 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	clk_25_1: clock5 { /* u92/u91 - GEM3 */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	clk_74: clock6 { /* u88 - SLVC-EC */
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
+
+	dpcon {
+		compatible = "dp-connector";
+		label = "P11";
+		type = "full-size";
+
+		port {
+			dpcon_in: endpoint {
+				remote-endpoint = <&dpsub_dp_out>;
+			};
+		};
+	};
+};
+
+&i2c1 { /* I2C_SCK C26/C27 - MIO from SOM */
+	#address-cells = <1>;
+	#size-cells = <0>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1_default>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio 24 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+	sda-gpios = <&gpio 25 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+
+	u14: ina260@40 { /* u14 */
+		compatible = "ti,ina260";
+		#io-channel-cells = <1>;
+		label = "ina260-u14";
+		reg = <0x40>;
+	};
+
+	slg7xl45106: gpio@11 { /* u19 - reset logic */
+		compatible = "dlg,slg7xl45106";
+		reg = <0x11>;
+		label = "resetchip";
+		gpio-controller;
+		#gpio-cells = <2>;
+		gpio-line-names = "USB0_PHY_RESET_B", "USB1_PHY_RESET_B",
+				  "SD_RESET_B", "USB0_HUB_RESET_B",
+				  "USB1_HUB_RESET_B", "PS_GEM0_RESET_B",
+				  "PS_GEM1_RESET_B", "";
+	};
+
+	i2c-mux@74 { /* u18 */
+		compatible = "nxp,pca9546";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x74>;
+		usbhub_i2c0: i2c@0 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0>;
+			hub_1: usb-hub@2d {
+				compatible = "microchip,usb5744";
+				reg = <0x2d>;
+			};
+		};
+		usbhub_i2c1: i2c@1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <1>;
+			hub_2: usb-hub@2d {
+				compatible = "microchip,usb5744";
+				reg = <0x2d>;
+			};
+		};
+		/* Bus 2/3 are not connected */
+	};
+
+	/* si5332@6a - u17 - clock-generator */
+};
+
+/* GEM SGMII/DP and USB 3.0 */
+&psgtr {
+	status = "okay";
+	/* gem0/1, dp, usb */
+	clocks = <&clk_125>, <&clk_27>, <&clk_26>;
+	clock-names = "ref0", "ref1", "ref2";
+};
+
+&zynqmp_dpsub {
+	status = "okay";
+	phy-names = "dp-phy0";
+	phys = <&psgtr 1 PHY_TYPE_DP 0 1>;
+	assigned-clock-rates = <27000000>, <25000000>, <300000000>;
+};
+
+&out_dp {
+	dpsub_dp_out: endpoint {
+		remote-endpoint = <&dpcon_in>;
+	};
+};
+
+&zynqmp_dpdma {
+	status = "okay";
+	assigned-clock-rates = <600000000>;
+};
+
+&usb0 { /* mio52 - mio63 */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb0_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
+	reset-gpios = <&slg7xl45106 0 GPIO_ACTIVE_LOW>;
+	assigned-clock-rates = <250000000>, <20000000>;
+};
+
+&dwc3_0 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
+	maximum-speed = "super-speed";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 2.0 hub on port 1 */
+	hub_2_0: hub@1 {
+		compatible = "usb424,2744";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		i2c-bus = <&hub_1>;
+		reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
+	};
+
+	/* 3.0 hub on port 2 */
+	hub_3_0: hub@2 {
+		compatible = "usb424,5744";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		i2c-bus = <&hub_1>;
+		reset-gpios = <&slg7xl45106 3 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&usb1 { /* mio64 - mio75 */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb1_default>;
+	phy-names = "usb3-phy";
+	phys = <&psgtr 3 PHY_TYPE_USB3 1 2>;
+	reset-gpios = <&slg7xl45106 1 GPIO_ACTIVE_LOW>;
+	assigned-clock-rates = <250000000>, <20000000>;
+};
+
+&dwc3_1 {
+	status = "okay";
+	dr_mode = "host";
+	snps,usb3_lpm_capable;
+	maximum-speed = "super-speed";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 2.0 hub on port 1 */
+	hub1_2_0: hub@1 {
+		compatible = "usb424,2744";
+		reg = <1>;
+		peer-hub = <&hub1_3_0>;
+		i2c-bus = <&hub_2>;
+		reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>;
+	};
+
+	/* 3.0 hub on port 2 */
+	hub1_3_0: hub@2 {
+		compatible = "usb424,5744";
+		reg = <2>;
+		peer-hub = <&hub1_2_0>;
+		i2c-bus = <&hub_2>;
+		reset-gpios = <&slg7xl45106 4 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&gem0 { /* mdio mio50/51 */
+	status = "okay";
+	phys = <&psgtr 0 PHY_TYPE_SGMII 0 0>;
+	phy-handle = <&phy0>;
+	phy-mode = "sgmii";
+	assigned-clock-rates = <250000000>;
+};
+
+&gem1 { /* mdio mio50/51, gem mio38 - mio49 */
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_gem1_default>;
+	phy-handle = <&phy1>;
+	phy-mode = "rgmii-id";
+	assigned-clock-rates = <250000000>;
+
+	mdio: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		phy0: ethernet-phy@4 { /* u81 */
+			#phy-cells = <1>;
+			compatible = "ethernet-phy-id2000.a231";
+			reg = <4>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			reset-assert-us = <300>;
+			reset-deassert-us = <280>;
+			reset-gpios = <&slg7xl45106 5 GPIO_ACTIVE_LOW>;
+		};
+		phy1: ethernet-phy@8 { /* u36 */
+			#phy-cells = <1>;
+			compatible = "ethernet-phy-id2000.a231";
+			reg = <8>;
+			ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+			ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_75_NS>;
+			ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+			ti,dp83867-rxctrl-strap-quirk;
+			reset-assert-us = <100>;
+			reset-deassert-us = <280>;
+			reset-gpios = <&slg7xl45106 6 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+/* gem2/gem3 via PL with phys u79@2 and u80@3 */
+
+&pinctrl0 {
+	status = "okay";
+
+	pinctrl_uart1_default: uart1-default {
+		conf {
+			groups = "uart1_9_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			drive-strength = <12>;
+		};
+
+		conf-rx {
+			pins = "MIO37";
+			bias-high-impedance;
+		};
+
+		conf-tx {
+			pins = "MIO36";
+			bias-disable;
+			output-enable;
+		};
+
+		mux {
+			groups = "uart1_9_grp";
+			function = "uart1";
+		};
+	};
+
+	pinctrl_i2c1_default: i2c1-default {
+		conf {
+			groups = "i2c1_6_grp";
+			bias-pull-up;
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux {
+			groups = "i2c1_6_grp";
+			function = "i2c1";
+		};
+	};
+
+	pinctrl_i2c1_gpio: i2c1-gpio-grp {
+		conf {
+			groups = "gpio0_24_grp", "gpio0_25_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		mux {
+			groups = "gpio0_24_grp", "gpio0_25_grp";
+			function = "gpio0";
+		};
+	};
+
+	pinctrl_gem1_default: gem1-default {
+		conf {
+			groups = "ethernet1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO44", "MIO46", "MIO48";
+			bias-high-impedance;
+			low-power-disable;
+		};
+
+		conf-bootstrap {
+			pins = "MIO45", "MIO47", "MIO49";
+			bias-disable;
+			output-enable;
+			low-power-disable;
+		};
+
+		conf-tx {
+			pins = "MIO38", "MIO39", "MIO40",
+				"MIO41", "MIO42", "MIO43";
+			bias-disable;
+			output-enable;
+			low-power-enable;
+		};
+
+		conf-mdio {
+			groups = "mdio1_0_grp";
+			slew-rate = <SLEW_RATE_SLOW>;
+			power-source = <IO_STANDARD_LVCMOS18>;
+			bias-disable;
+			output-enable;
+		};
+
+		mux-mdio {
+			function = "mdio1";
+			groups = "mdio1_0_grp";
+		};
+
+		mux {
+			function = "ethernet1";
+			groups = "ethernet1_0_grp";
+		};
+	};
+
+	pinctrl_usb0_default: usb0-default {
+		conf {
+			groups = "usb0_0_grp";
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO52", "MIO53", "MIO55";
+			bias-high-impedance;
+			drive-strength = <12>;
+			slew-rate = <SLEW_RATE_FAST>;
+		};
+
+		conf-tx {
+			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
+			"MIO60", "MIO61", "MIO62", "MIO63";
+			bias-disable;
+			output-enable;
+			drive-strength = <4>;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+
+		mux {
+			groups = "usb0_0_grp";
+			function = "usb0";
+		};
+	};
+
+	pinctrl_usb1_default: usb1-default {
+		conf {
+			groups = "usb1_0_grp";
+			power-source = <IO_STANDARD_LVCMOS18>;
+		};
+
+		conf-rx {
+			pins = "MIO64", "MIO65", "MIO67";
+			bias-high-impedance;
+			drive-strength = <12>;
+			slew-rate = <SLEW_RATE_FAST>;
+		};
+
+		conf-tx {
+			pins = "MIO66", "MIO68", "MIO69", "MIO70", "MIO71",
+			"MIO72", "MIO73", "MIO74", "MIO75";
+			bias-disable;
+			output-enable;
+			drive-strength = <4>;
+			slew-rate = <SLEW_RATE_SLOW>;
+		};
+
+		mux {
+			groups = "usb1_0_grp";
+			function = "usb1";
+		};
+	};
+};
+
+&uart1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1_default>;
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
index 95d16904d765..d7351a17d3e8 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revA.dtso
@@ -28,6 +28,10 @@
 		     "xlnx,zynqmp-sk-kv260", "xlnx,zynqmp";
 	model = "ZynqMP KV260 revA";
 
+	aliases {
+		ethernet0 = "/axi/ethernet@ff0e0000"; /* &gem3 */
+	};
+
 	ina260-u14 {
 		compatible = "iio-hwmon";
 		io-channels = <&u14 0>, <&u14 1>, <&u14 2>;
@@ -68,6 +72,17 @@
 		#clock-cells = <0>;
 		clock-frequency = <27000000>;
 	};
+	dpcon {
+		compatible = "dp-connector";
+		label = "P11";
+		type = "full-size";
+
+		port {
+			dpcon_in: endpoint {
+				remote-endpoint = <&dpsub_dp_out>;
+			};
+		};
+	};
 };
 
 &i2c1 { /* I2C_SCK C23/C24 - MIO from SOM */
@@ -118,6 +133,12 @@
 	assigned-clock-rates = <27000000>, <25000000>, <300000000>;
 };
 
+&out_dp {
+	dpsub_dp_out: endpoint {
+		remote-endpoint = <&dpcon_in>;
+	};
+};
+
 &zynqmp_dpdma {
 	status = "okay";
 	assigned-clock-rates = <600000000>;
@@ -129,7 +150,6 @@
 	pinctrl-0 = <&pinctrl_usb0_default>;
 	phy-names = "usb3-phy";
 	phys = <&psgtr 2 PHY_TYPE_USB3 0 1>;
-	/* missing usb5744 - u43 */
 };
 
 &dwc3_0 {
@@ -137,6 +157,24 @@
 	dr_mode = "host";
 	snps,usb3_lpm_capable;
 	maximum-speed = "super-speed";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 2.0 hub on port 1 */
+	hub_2_0: hub@1 {
+		compatible = "usb424,2744";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+	};
+
+	/* 3.0 hub on port 2 */
+	hub_3_0: hub@2 {
+		compatible = "usb424,5744";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &sdhci1 { /* on CC with tuned parameters */
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
index a74d0ac7e07a..a4ae37ebaccf 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sck-kv-g-revB.dtso
@@ -23,6 +23,10 @@
 		     "xlnx,zynqmp-sk-kv260", "xlnx,zynqmp";
 	model = "ZynqMP KV260 revB";
 
+	aliases {
+		ethernet0 = "/axi/ethernet@ff0e0000"; /* &gem3 */
+	};
+
 	ina260-u14 {
 		compatible = "iio-hwmon";
 		io-channels = <&u14 0>, <&u14 1>, <&u14 2>;
@@ -92,7 +96,10 @@
 		label = "ina260-u14";
 		reg = <0x40>;
 	};
-	/* u43 - 0x2d - USB hub */
+	hub: usb-hub@2d {
+		compatible = "microchip,usb5744";
+		reg = <0x2d>;
+	};
 	/* u27 - 0xe0 - STDP4320 DP/HDMI splitter */
 };
 
@@ -109,13 +116,11 @@
 	phy-names = "dp-phy0", "dp-phy1";
 	phys = <&psgtr 1 PHY_TYPE_DP 0 0>, <&psgtr 0 PHY_TYPE_DP 1 0>;
 	assigned-clock-rates = <27000000>, <25000000>, <300000000>;
+};
 
-	ports {
-		port@5 {
-			dpsub_dp_out: endpoint {
-				remote-endpoint = <&dpcon_in>;
-			};
-		};
+&out_dp {
+	dpsub_dp_out: endpoint {
+		remote-endpoint = <&dpcon_in>;
 	};
 };
 
@@ -138,6 +143,26 @@
 	dr_mode = "host";
 	snps,usb3_lpm_capable;
 	maximum-speed = "super-speed";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	/* 2.0 hub on port 1 */
+	hub_2_0: hub@1 {
+		compatible = "usb424,2744";
+		reg = <1>;
+		peer-hub = <&hub_3_0>;
+		i2c-bus = <&hub>;
+		reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+	};
+
+	/* 3.0 hub on port 2 */
+	hub_3_0: hub@2 {
+		compatible = "usb424,5744";
+		reg = <2>;
+		peer-hub = <&hub_2_0>;
+		i2c-bus = <&hub>;
+		reset-gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &sdhci1 { /* on CC with tuned parameters */
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k24-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k24-revA.dts
new file mode 100644
index 000000000000..653bd9362264
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k24-revA.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP SM-K24 RevA
+ *
+ * (C) Copyright 2020 - 2021, Xilinx, Inc.
+ * (C) Copyright 2022, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include "zynqmp-sm-k26-revA.dts"
+
+/ {
+	model = "ZynqMP SM-K24 RevA/B/1";
+	compatible = "xlnx,zynqmp-sm-k24-rev1", "xlnx,zynqmp-sm-k24-revB",
+		     "xlnx,zynqmp-sm-k24-revA", "xlnx,zynqmp-sm-k24",
+		     "xlnx,zynqmp";
+
+	memory@0 {
+		device_type = "memory"; /* 2GB */
+		reg = <0 0 0 0x80000000>;
+	};
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
index bfa7ea6b9224..500af1d2232f 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-sm-k26-revA.dts
@@ -90,10 +90,10 @@
 		};
 	};
 
-	pwm-fan {
+	pwm_fan: pwm-fan {
 		compatible = "pwm-fan";
 		status = "okay";
-		pwms = <&ttc0 2 40000 0>;
+		pwms = <&ttc0 2 40000 1>;
 	};
 };
 
@@ -233,6 +233,9 @@
 	pinctrl-0 = <&pinctrl_sdhci0_default>;
 	non-removable;
 	disable-wp;
+	no-sd;
+	no-sdio;
+	cap-mmc-hw-reset;
 	bus-width = <8>;
 	xlnx,mio-bank = <0>;
 	assigned-clock-rates = <187498123>;
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-smk-k24-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-smk-k24-revA.dts
new file mode 100644
index 000000000000..7308983b15a0
--- /dev/null
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-smk-k24-revA.dts
@@ -0,0 +1,21 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * dts file for Xilinx ZynqMP SMK-K24 RevA
+ *
+ * (C) Copyright 2020 - 2021, Xilinx, Inc.
+ * (C) Copyright 2022, Advanced Micro Devices, Inc.
+ *
+ * Michal Simek <michal.simek@amd.com>
+ */
+
+#include "zynqmp-sm-k24-revA.dts"
+
+/ {
+	model = "ZynqMP SMK-K24 RevA";
+	compatible = "xlnx,zynqmp-smk-k24-revA", "xlnx,zynqmp-smk-k24",
+		     "xlnx,zynqmp";
+};
+
+&sdhci0 {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
index 1850325e1d6c..2ad7423c2f05 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm016-dc2.dts
@@ -135,7 +135,6 @@
 	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_nand0_default>;
-	arasan,has-mdma;
 
 	nand@0 {
 		reg = <0x0>;
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
index f553b317e6b2..8fbc33562bc4 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zc1751-xm017-dc3.dts
@@ -129,7 +129,6 @@
 /* MT29F64G08AECDBJ4-6 */
 &nand0 {
 	status = "okay";
-	arasan,has-mdma;
 	num-cs = <2>;
 };
 
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
index 62c2503a502a..4ec8a400494e 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu100-revC.dts
@@ -134,6 +134,18 @@
 		#clock-cells = <0>;
 		clock-frequency = <27000000>;
 	};
+
+	dpcon {
+		compatible = "dp-connector";
+		label = "P11";
+		type = "full-size";
+
+		port {
+			dpcon_in: endpoint {
+				remote-endpoint = <&dpsub_dp_out>;
+			};
+		};
+	};
 };
 
 &dcc {
@@ -509,6 +521,9 @@
 	xlnx,mio-bank = <0>;
 	non-removable;
 	disable-wp;
+	no-sd;
+	no-sdio;
+	cap-mmc-hw-reset;
 	cap-power-off-card;
 	mmc-pwrseq = <&sdio_pwrseq>;
 	vqmmc-supply = <&wmmcsdio_fixed>;
@@ -604,3 +619,9 @@
 	phys = <&psgtr 1 PHY_TYPE_DP 0 1>,
 	       <&psgtr 0 PHY_TYPE_DP 1 1>;
 };
+
+&out_dp {
+	dpsub_dp_out: endpoint {
+		remote-endpoint = <&dpcon_in>;
+	};
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
index 7e26489a1539..e172a30e7b21 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu102-revA.dts
@@ -151,6 +151,18 @@
 		#clock-cells = <0>;
 		clock-frequency = <114285000>;
 	};
+
+	dpcon {
+		compatible = "dp-connector";
+		label = "P11";
+		type = "full-size";
+
+		port {
+			dpcon_in: endpoint {
+				remote-endpoint = <&dpsub_dp_out>;
+			};
+		};
+	};
 };
 
 &can1 {
@@ -1045,3 +1057,9 @@
 	phy-names = "dp-phy0";
 	phys = <&psgtr 1 PHY_TYPE_DP 0 3>;
 };
+
+&out_dp {
+	dpsub_dp_out: endpoint {
+		remote-endpoint = <&dpcon_in>;
+	};
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
index eb2090673ec1..fe8f151ed706 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revA.dts
@@ -60,6 +60,18 @@
 		#clock-cells = <0>;
 		clock-frequency = <27000000>;
 	};
+
+	dpcon {
+		compatible = "dp-connector";
+		label = "P11";
+		type = "full-size";
+
+		port {
+			dpcon_in: endpoint {
+				remote-endpoint = <&dpsub_dp_out>;
+			};
+		};
+	};
 };
 
 &can1 {
@@ -529,3 +541,9 @@
 	phys = <&psgtr 1 PHY_TYPE_DP 0 3>,
 	       <&psgtr 0 PHY_TYPE_DP 1 3>;
 };
+
+&out_dp {
+	dpsub_dp_out: endpoint {
+		remote-endpoint = <&dpcon_in>;
+	};
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
index 4694d0a841f1..3ee8ab224722 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu104-revC.dts
@@ -65,6 +65,18 @@
 		#clock-cells = <0>;
 		clock-frequency = <27000000>;
 	};
+
+	dpcon {
+		compatible = "dp-connector";
+		label = "P11";
+		type = "full-size";
+
+		port {
+			dpcon_in: endpoint {
+				remote-endpoint = <&dpsub_dp_out>;
+			};
+		};
+	};
 };
 
 &can1 {
@@ -541,3 +553,9 @@
 	phys = <&psgtr 1 PHY_TYPE_DP 0 3>,
 	       <&psgtr 0 PHY_TYPE_DP 1 3>;
 };
+
+&out_dp {
+	dpsub_dp_out: endpoint {
+		remote-endpoint = <&dpcon_in>;
+	};
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
index 7beedd730f94..7f6c87d4d77e 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu106-revA.dts
@@ -808,8 +808,8 @@
 			pins = "MIO54", "MIO56", "MIO57", "MIO58", "MIO59",
 			       "MIO60", "MIO61", "MIO62", "MIO63";
 			bias-disable;
-			drive-strength = <4>;
-			slew-rate = <SLEW_RATE_SLOW>;
+			drive-strength = <12>;
+			slew-rate = <SLEW_RATE_FAST>;
 		};
 	};
 
@@ -1042,12 +1042,10 @@
 	phy-names = "dp-phy0", "dp-phy1";
 	phys = <&psgtr 1 PHY_TYPE_DP 0 3>,
 	       <&psgtr 0 PHY_TYPE_DP 1 3>;
+};
 
-	ports {
-		port@5 {
-			dpsub_dp_out: endpoint {
-				remote-endpoint = <&dpcon_in>;
-			};
-		};
+&out_dp {
+	dpsub_dp_out: endpoint {
+		remote-endpoint = <&dpcon_in>;
 	};
 };
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
index b67ff7ecf3c3..428b5558fbba 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
+++ b/arch/arm64/boot/dts/xilinx/zynqmp-zcu111-revA.dts
@@ -129,6 +129,18 @@
 		#clock-cells = <0>;
 		clock-frequency = <48000000>;
 	};
+
+	dpcon {
+		compatible = "dp-connector";
+		label = "P11";
+		type = "full-size";
+
+		port {
+			dpcon_in: endpoint {
+				remote-endpoint = <&dpsub_dp_out>;
+			};
+		};
+	};
 };
 
 &dcc {
@@ -494,7 +506,7 @@
 			#address-cells = <1>;
 			#size-cells = <0>;
 			reg = <5>;
-				sc18is603@2f { /* sc18is602 - u93 */
+				sc18is603: spi@2f { /* sc18is602 - u93 */
 					compatible = "nxp,sc18is603";
 					reg = <0x2f>;
 					/* 4 gpios for CS not handled by driver */
@@ -864,3 +876,9 @@
 	phys = <&psgtr 1 PHY_TYPE_DP 0 1>,
 	       <&psgtr 0 PHY_TYPE_DP 1 1>;
 };
+
+&out_dp {
+	dpsub_dp_out: endpoint {
+		remote-endpoint = <&dpcon_in>;
+	};
+};
diff --git a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
index e11d282462bd..938b014ca923 100644
--- a/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
+++ b/arch/arm64/boot/dts/xilinx/zynqmp.dtsi
@@ -187,7 +187,7 @@
 	};
 
 	psci {
-		compatible = "arm,psci-0.2";
+		compatible = "arm,psci-1.0", "arm,psci-0.2";
 		method = "smc";
 	};
 
@@ -550,6 +550,7 @@
 			reg = <0x0 0xfec10000 0x0 0x1000>;
 			clock-names = "apb_pclk";
 			cpu = <&cpu0>;
+			status = "disabled";
 		};
 
 		cpu1_debug: debug@fed10000 {
@@ -557,6 +558,7 @@
 			reg = <0x0 0xfed10000 0x0 0x1000>;
 			clock-names = "apb_pclk";
 			cpu = <&cpu1>;
+			status = "disabled";
 		};
 
 		cpu2_debug: debug@fee10000 {
@@ -564,6 +566,7 @@
 			reg = <0x0 0xfee10000 0x0 0x1000>;
 			clock-names = "apb_pclk";
 			cpu = <&cpu2>;
+			status = "disabled";
 		};
 
 		cpu3_debug: debug@fef10000 {
@@ -571,6 +574,7 @@
 			reg = <0x0 0xfef10000 0x0 0x1000>;
 			clock-names = "apb_pclk";
 			cpu = <&cpu3>;
+			status = "disabled";
 		};
 
 		/* GDMA */
@@ -1319,22 +1323,22 @@
 				#address-cells = <1>;
 				#size-cells = <0>;
 
-				port@0 {
+				live_video: port@0 {
 					reg = <0>;
 				};
-				port@1 {
+				live_gfx: port@1 {
 					reg = <1>;
 				};
-				port@2 {
+				live_audio: port@2 {
 					reg = <2>;
 				};
-				port@3 {
+				out_video: port@3 {
 					reg = <3>;
 				};
-				port@4 {
+				out_audio: port@4 {
 					reg = <4>;
 				};
-				port@5 {
+				out_dp: port@5 {
 					reg = <5>;
 				};
 			};
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 58f87d09366c..e3a2d37bd104 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -38,6 +38,7 @@ CONFIG_ARCH_AIROHA=y
 CONFIG_ARCH_SUNXI=y
 CONFIG_ARCH_ALPINE=y
 CONFIG_ARCH_APPLE=y
+CONFIG_ARCH_ARTPEC=y
 CONFIG_ARCH_AXIADO=y
 CONFIG_ARCH_BCM=y
 CONFIG_ARCH_BCM2835=y
@@ -441,6 +442,7 @@ CONFIG_IWLMVM=m
 CONFIG_MWIFIEX=m
 CONFIG_MWIFIEX_SDIO=m
 CONFIG_MWIFIEX_PCIE=m
+CONFIG_MWIFIEX_USB=m
 CONFIG_MT7921E=m
 CONFIG_RSI_91X=m
 CONFIG_WL18XX=m
@@ -499,6 +501,7 @@ CONFIG_SERIAL_TEGRA_TCU=y
 CONFIG_SERIAL_IMX=y
 CONFIG_SERIAL_IMX_CONSOLE=y
 CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_RSCI=y
 CONFIG_SERIAL_MSM=y
 CONFIG_SERIAL_MSM_CONSOLE=y
 CONFIG_SERIAL_QCOM_GENI=y
@@ -579,6 +582,7 @@ CONFIG_SPI_ROCKCHIP=y
 CONFIG_SPI_ROCKCHIP_SFC=m
 CONFIG_SPI_RPCIF=m
 CONFIG_SPI_RSPI=m
+CONFIG_SPI_RZV2H_RSPI=m
 CONFIG_SPI_RZV2M_CSI=m
 CONFIG_SPI_QCOM_QSPI=m
 CONFIG_SPI_QUP=y
@@ -592,6 +596,8 @@ CONFIG_SPI_TEGRA114=m
 CONFIG_SPI_SPIDEV=m
 CONFIG_SPMI=y
 CONFIG_SPMI_MTK_PMIF=m
+CONFIG_PINCTRL_BRCMSTB=y
+CONFIG_PINCTRL_BCM2712=y
 CONFIG_PINCTRL_DA9062=m
 CONFIG_PINCTRL_MAX77620=y
 CONFIG_PINCTRL_RK805=m
@@ -607,6 +613,7 @@ CONFIG_PINCTRL_IMX8QM=y
 CONFIG_PINCTRL_IMX8QXP=y
 CONFIG_PINCTRL_IMX8DXL=y
 CONFIG_PINCTRL_IMX8ULP=y
+CONFIG_PINCTRL_IMX91=y
 CONFIG_PINCTRL_IMX93=y
 CONFIG_PINCTRL_MSM=y
 CONFIG_PINCTRL_IPQ5018=y
@@ -1300,6 +1307,7 @@ CONFIG_RENESAS_USB_DMAC=m
 CONFIG_RZ_DMAC=y
 CONFIG_TI_K3_UDMA=y
 CONFIG_TI_K3_UDMA_GLUE_LAYER=y
+CONFIG_STM32_DMA3=m
 CONFIG_VFIO=y
 CONFIG_VFIO_PCI=y
 CONFIG_VIRTIO_PCI=y
@@ -1360,6 +1368,7 @@ CONFIG_CLK_X1E80100_DISPCC=m
 CONFIG_CLK_X1E80100_GCC=y
 CONFIG_CLK_X1E80100_GPUCC=m
 CONFIG_CLK_X1E80100_TCSRCC=y
+CONFIG_CLK_X1P42100_GPUCC=m
 CONFIG_CLK_QCM2290_GPUCC=m
 CONFIG_QCOM_A53PLL=y
 CONFIG_QCOM_CLK_APCS_MSM8916=y
@@ -1385,11 +1394,15 @@ CONFIG_MSM_GCC_8998=y
 CONFIG_MSM_MMCC_8998=m
 CONFIG_QCM_GCC_2290=y
 CONFIG_QCM_DISPCC_2290=m
+CONFIG_QCS_DISPCC_615=m
+CONFIG_QCS_CAMCC_615=m
 CONFIG_QCS_GCC_404=y
 CONFIG_QCS_GCC_615=y
 CONFIG_QCS_GCC_8300=y
 CONFIG_SC_CAMCC_7280=m
 CONFIG_SA_CAMCC_8775P=m
+CONFIG_QCS_GPUCC_615=m
+CONFIG_QCS_VIDEOCC_615=m
 CONFIG_QDU_GCC_1000=y
 CONFIG_SC_CAMCC_8280XP=m
 CONFIG_SC_DISPCC_7280=m
diff --git a/arch/arm64/include/asm/cpufeature.h b/arch/arm64/include/asm/cpufeature.h
index bf13d676aae2..e223cbf350e4 100644
--- a/arch/arm64/include/asm/cpufeature.h
+++ b/arch/arm64/include/asm/cpufeature.h
@@ -871,6 +871,8 @@ static inline bool system_supports_pmuv3(void)
 	return cpus_have_final_cap(ARM64_HAS_PMUV3);
 }
 
+bool cpu_supports_bbml2_noabort(void);
+
 static inline bool system_supports_bbml2_noabort(void)
 {
 	return alternative_has_cap_unlikely(ARM64_HAS_BBML2_NOABORT);
diff --git a/arch/arm64/include/asm/cputype.h b/arch/arm64/include/asm/cputype.h
index 661735616787..9b00b75acbf2 100644
--- a/arch/arm64/include/asm/cputype.h
+++ b/arch/arm64/include/asm/cputype.h
@@ -81,7 +81,6 @@
 #define ARM_CPU_PART_CORTEX_A78AE	0xD42
 #define ARM_CPU_PART_CORTEX_X1		0xD44
 #define ARM_CPU_PART_CORTEX_A510	0xD46
-#define ARM_CPU_PART_CORTEX_X1C		0xD4C
 #define ARM_CPU_PART_CORTEX_A520	0xD80
 #define ARM_CPU_PART_CORTEX_A710	0xD47
 #define ARM_CPU_PART_CORTEX_A715	0xD4D
@@ -93,9 +92,11 @@
 #define ARM_CPU_PART_NEOVERSE_V2	0xD4F
 #define ARM_CPU_PART_CORTEX_A720	0xD81
 #define ARM_CPU_PART_CORTEX_X4		0xD82
+#define ARM_CPU_PART_NEOVERSE_V3AE	0xD83
 #define ARM_CPU_PART_NEOVERSE_V3	0xD84
 #define ARM_CPU_PART_CORTEX_X925	0xD85
 #define ARM_CPU_PART_CORTEX_A725	0xD87
+#define ARM_CPU_PART_CORTEX_A720AE	0xD89
 #define ARM_CPU_PART_NEOVERSE_N3	0xD8E
 
 #define APM_CPU_PART_XGENE		0x000
@@ -129,6 +130,7 @@
 
 #define NVIDIA_CPU_PART_DENVER		0x003
 #define NVIDIA_CPU_PART_CARMEL		0x004
+#define NVIDIA_CPU_PART_OLYMPUS		0x010
 
 #define FUJITSU_CPU_PART_A64FX		0x001
 
@@ -170,7 +172,6 @@
 #define MIDR_CORTEX_A78AE	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A78AE)
 #define MIDR_CORTEX_X1	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_X1)
 #define MIDR_CORTEX_A510 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A510)
-#define MIDR_CORTEX_X1C MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_X1C)
 #define MIDR_CORTEX_A520 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A520)
 #define MIDR_CORTEX_A710 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A710)
 #define MIDR_CORTEX_A715 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A715)
@@ -182,9 +183,11 @@
 #define MIDR_NEOVERSE_V2 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_NEOVERSE_V2)
 #define MIDR_CORTEX_A720 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A720)
 #define MIDR_CORTEX_X4 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_X4)
+#define MIDR_NEOVERSE_V3AE	MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_NEOVERSE_V3AE)
 #define MIDR_NEOVERSE_V3 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_NEOVERSE_V3)
 #define MIDR_CORTEX_X925 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_X925)
 #define MIDR_CORTEX_A725 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A725)
+#define MIDR_CORTEX_A720AE MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_CORTEX_A720AE)
 #define MIDR_NEOVERSE_N3 MIDR_CPU_MODEL(ARM_CPU_IMP_ARM, ARM_CPU_PART_NEOVERSE_N3)
 #define MIDR_THUNDERX	MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX)
 #define MIDR_THUNDERX_81XX MIDR_CPU_MODEL(ARM_CPU_IMP_CAVIUM, CAVIUM_CPU_PART_THUNDERX_81XX)
@@ -220,6 +223,7 @@
 
 #define MIDR_NVIDIA_DENVER MIDR_CPU_MODEL(ARM_CPU_IMP_NVIDIA, NVIDIA_CPU_PART_DENVER)
 #define MIDR_NVIDIA_CARMEL MIDR_CPU_MODEL(ARM_CPU_IMP_NVIDIA, NVIDIA_CPU_PART_CARMEL)
+#define MIDR_NVIDIA_OLYMPUS MIDR_CPU_MODEL(ARM_CPU_IMP_NVIDIA, NVIDIA_CPU_PART_OLYMPUS)
 #define MIDR_FUJITSU_A64FX MIDR_CPU_MODEL(ARM_CPU_IMP_FUJITSU, FUJITSU_CPU_PART_A64FX)
 #define MIDR_HISI_TSV110 MIDR_CPU_MODEL(ARM_CPU_IMP_HISI, HISI_CPU_PART_TSV110)
 #define MIDR_HISI_HIP09 MIDR_CPU_MODEL(ARM_CPU_IMP_HISI, HISI_CPU_PART_HIP09)
diff --git a/arch/arm64/include/asm/daifflags.h b/arch/arm64/include/asm/daifflags.h
index fbb5c99eb2f9..5fca48009043 100644
--- a/arch/arm64/include/asm/daifflags.h
+++ b/arch/arm64/include/asm/daifflags.h
@@ -128,7 +128,7 @@ static inline void local_daif_inherit(struct pt_regs *regs)
 {
 	unsigned long flags = regs->pstate & DAIF_MASK;
 
-	if (interrupts_enabled(regs))
+	if (!regs_irqs_disabled(regs))
 		trace_hardirqs_on();
 
 	if (system_uses_irq_prio_masking())
diff --git a/arch/arm64/include/asm/el2_setup.h b/arch/arm64/include/asm/el2_setup.h
index 46033027510c..b37da3ee8529 100644
--- a/arch/arm64/include/asm/el2_setup.h
+++ b/arch/arm64/include/asm/el2_setup.h
@@ -91,6 +91,14 @@
 	msr	cntvoff_el2, xzr		// Clear virtual offset
 .endm
 
+/* Branch to skip_label if SPE version is less than given version */
+.macro __spe_vers_imp skip_label, version, tmp
+    mrs    \tmp, id_aa64dfr0_el1
+    ubfx   \tmp, \tmp, #ID_AA64DFR0_EL1_PMSVer_SHIFT, #4
+    cmp    \tmp, \version
+    b.lt   \skip_label
+.endm
+
 .macro __init_el2_debug
 	mrs	x1, id_aa64dfr0_el1
 	ubfx	x0, x1, #ID_AA64DFR0_EL1_PMUVer_SHIFT, #4
@@ -103,8 +111,7 @@
 	csel	x2, xzr, x0, eq			// all PMU counters from EL1
 
 	/* Statistical profiling */
-	ubfx	x0, x1, #ID_AA64DFR0_EL1_PMSVer_SHIFT, #4
-	cbz	x0, .Lskip_spe_\@		// Skip if SPE not present
+	__spe_vers_imp .Lskip_spe_\@, ID_AA64DFR0_EL1_PMSVer_IMP, x0 // Skip if SPE not present
 
 	mrs_s	x0, SYS_PMBIDR_EL1              // If SPE available at EL2,
 	and	x0, x0, #(1 << PMBIDR_EL1_P_SHIFT)
@@ -263,10 +270,8 @@
 
 	mov	x0, xzr
 	mov	x2, xzr
-	mrs	x1, id_aa64dfr0_el1
-	ubfx	x1, x1, #ID_AA64DFR0_EL1_PMSVer_SHIFT, #4
-	cmp	x1, #3
-	b.lt	.Lskip_spe_fgt_\@
+	/* If SPEv1p2 is implemented, */
+	__spe_vers_imp .Lskip_spe_fgt_\@, #ID_AA64DFR0_EL1_PMSVer_V1P2, x1
 	/* Disable PMSNEVFR_EL1 read and write traps */
 	orr	x0, x0, #HDFGRTR_EL2_nPMSNEVFR_EL1_MASK
 	orr	x2, x2, #HDFGWTR_EL2_nPMSNEVFR_EL1_MASK
@@ -387,6 +392,17 @@
 	orr	x0, x0, #HDFGRTR2_EL2_nPMICFILTR_EL0
 	orr	x0, x0, #HDFGRTR2_EL2_nPMUACR_EL1
 .Lskip_pmuv3p9_\@:
+	/* If SPE is implemented, */
+	__spe_vers_imp .Lskip_spefds_\@, ID_AA64DFR0_EL1_PMSVer_IMP, x1
+	/* we can read PMSIDR and */
+	mrs_s	x1, SYS_PMSIDR_EL1
+	and	x1, x1,  #PMSIDR_EL1_FDS
+	/* if FEAT_SPE_FDS is implemented, */
+	cbz	x1, .Lskip_spefds_\@
+	/* disable traps of PMSDSFR to EL2. */
+	orr	x0, x0, #HDFGRTR2_EL2_nPMSDSFR_EL1
+
+.Lskip_spefds_\@:
 	msr_s   SYS_HDFGRTR2_EL2, x0
 	msr_s   SYS_HDFGWTR2_EL2, x0
 	msr_s   SYS_HFGRTR2_EL2, xzr
diff --git a/arch/arm64/include/asm/entry-common.h b/arch/arm64/include/asm/entry-common.h
new file mode 100644
index 000000000000..cab8cd78f693
--- /dev/null
+++ b/arch/arm64/include/asm/entry-common.h
@@ -0,0 +1,57 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef _ASM_ARM64_ENTRY_COMMON_H
+#define _ASM_ARM64_ENTRY_COMMON_H
+
+#include <linux/thread_info.h>
+
+#include <asm/cpufeature.h>
+#include <asm/daifflags.h>
+#include <asm/fpsimd.h>
+#include <asm/mte.h>
+#include <asm/stacktrace.h>
+
+#define ARCH_EXIT_TO_USER_MODE_WORK (_TIF_MTE_ASYNC_FAULT | _TIF_FOREIGN_FPSTATE)
+
+static __always_inline void arch_exit_to_user_mode_work(struct pt_regs *regs,
+							unsigned long ti_work)
+{
+	if (ti_work & _TIF_MTE_ASYNC_FAULT) {
+		clear_thread_flag(TIF_MTE_ASYNC_FAULT);
+		send_sig_fault(SIGSEGV, SEGV_MTEAERR, (void __user *)NULL, current);
+	}
+
+	if (ti_work & _TIF_FOREIGN_FPSTATE)
+		fpsimd_restore_current_state();
+}
+
+#define arch_exit_to_user_mode_work arch_exit_to_user_mode_work
+
+static inline bool arch_irqentry_exit_need_resched(void)
+{
+	/*
+	 * DAIF.DA are cleared at the start of IRQ/FIQ handling, and when GIC
+	 * priority masking is used the GIC irqchip driver will clear DAIF.IF
+	 * using gic_arch_enable_irqs() for normal IRQs. If anything is set in
+	 * DAIF we must have handled an NMI, so skip preemption.
+	 */
+	if (system_uses_irq_prio_masking() && read_sysreg(daif))
+		return false;
+
+	/*
+	 * Preempting a task from an IRQ means we leave copies of PSTATE
+	 * on the stack. cpufeature's enable calls may modify PSTATE, but
+	 * resuming one of these preempted tasks would undo those changes.
+	 *
+	 * Only allow a task to be preempted once cpufeatures have been
+	 * enabled.
+	 */
+	if (!system_capabilities_finalized())
+		return false;
+
+	return true;
+}
+
+#define arch_irqentry_exit_need_resched arch_irqentry_exit_need_resched
+
+#endif /* _ASM_ARM64_ENTRY_COMMON_H */
diff --git a/arch/arm64/include/asm/exception.h b/arch/arm64/include/asm/exception.h
index e3874c4fc399..a2da3cb21c24 100644
--- a/arch/arm64/include/asm/exception.h
+++ b/arch/arm64/include/asm/exception.h
@@ -89,7 +89,6 @@ void do_el1_fpac(struct pt_regs *regs, unsigned long esr);
 void do_el0_mops(struct pt_regs *regs, unsigned long esr);
 void do_el1_mops(struct pt_regs *regs, unsigned long esr);
 void do_serror(struct pt_regs *regs, unsigned long esr);
-void do_signal(struct pt_regs *regs);
 
 void __noreturn panic_bad_stack(struct pt_regs *regs, unsigned long esr, unsigned long far);
 #endif	/* __ASM_EXCEPTION_H */
diff --git a/arch/arm64/include/asm/gcs.h b/arch/arm64/include/asm/gcs.h
index 5bc432234d3a..8fa0707069e8 100644
--- a/arch/arm64/include/asm/gcs.h
+++ b/arch/arm64/include/asm/gcs.h
@@ -21,7 +21,7 @@ static inline void gcsstr(u64 *addr, u64 val)
 	register u64 *_addr __asm__ ("x0") = addr;
 	register long _val __asm__ ("x1") = val;
 
-	/* GCSSTTR x1, x0 */
+	/* GCSSTTR x1, [x0] */
 	asm volatile(
 		".inst 0xd91f1c01\n"
 		:
@@ -81,6 +81,82 @@ static inline int gcs_check_locked(struct task_struct *task,
 	return 0;
 }
 
+static inline int gcssttr(unsigned long __user *addr, unsigned long val)
+{
+	register unsigned long __user *_addr __asm__ ("x0") = addr;
+	register unsigned long _val __asm__ ("x1") = val;
+	int err = 0;
+
+	/* GCSSTTR x1, [x0] */
+	asm volatile(
+		"1: .inst 0xd91f1c01\n"
+		"2: \n"
+		_ASM_EXTABLE_UACCESS_ERR(1b, 2b, %w0)
+		: "+r" (err)
+		: "rZ" (_val), "r" (_addr)
+		: "memory");
+
+	return err;
+}
+
+static inline void put_user_gcs(unsigned long val, unsigned long __user *addr,
+				int *err)
+{
+	int ret;
+
+	if (!access_ok((char __user *)addr, sizeof(u64))) {
+		*err = -EFAULT;
+		return;
+	}
+
+	uaccess_ttbr0_enable();
+	ret = gcssttr(addr, val);
+	if (ret != 0)
+		*err = ret;
+	uaccess_ttbr0_disable();
+}
+
+static inline void push_user_gcs(unsigned long val, int *err)
+{
+	u64 gcspr = read_sysreg_s(SYS_GCSPR_EL0);
+
+	gcspr -= sizeof(u64);
+	put_user_gcs(val, (unsigned long __user *)gcspr, err);
+	if (!*err)
+		write_sysreg_s(gcspr, SYS_GCSPR_EL0);
+}
+
+/*
+ * Unlike put/push_user_gcs() above, get/pop_user_gsc() doesn't
+ * validate the GCS permission is set on the page being read.  This
+ * differs from how the hardware works when it consumes data stored at
+ * GCSPR. Callers should ensure this is acceptable.
+ */
+static inline u64 get_user_gcs(unsigned long __user *addr, int *err)
+{
+	unsigned long ret;
+	u64 load = 0;
+
+	/* Ensure previous GCS operation are visible before we read the page */
+	gcsb_dsync();
+	ret = copy_from_user(&load, addr, sizeof(load));
+	if (ret != 0)
+		*err = ret;
+	return load;
+}
+
+static inline u64 pop_user_gcs(int *err)
+{
+	u64 gcspr = read_sysreg_s(SYS_GCSPR_EL0);
+	u64 read_val;
+
+	read_val = get_user_gcs((__force unsigned long __user *)gcspr, err);
+	if (!*err)
+		write_sysreg_s(gcspr + sizeof(u64), SYS_GCSPR_EL0);
+
+	return read_val;
+}
+
 #else
 
 static inline bool task_gcs_el0_enabled(struct task_struct *task)
@@ -91,6 +167,10 @@ static inline bool task_gcs_el0_enabled(struct task_struct *task)
 static inline void gcs_set_el0_mode(struct task_struct *task) { }
 static inline void gcs_free(struct task_struct *task) { }
 static inline void gcs_preserve_current_state(void) { }
+static inline void put_user_gcs(unsigned long val, unsigned long __user *addr,
+				int *err) { }
+static inline void push_user_gcs(unsigned long val, int *err) { }
+
 static inline unsigned long gcs_alloc_thread_stack(struct task_struct *tsk,
 						   const struct kernel_clone_args *args)
 {
@@ -101,6 +181,15 @@ static inline int gcs_check_locked(struct task_struct *task,
 {
 	return 0;
 }
+static inline u64 get_user_gcs(unsigned long __user *addr, int *err)
+{
+	*err = -EFAULT;
+	return 0;
+}
+static inline u64 pop_user_gcs(int *err)
+{
+	return 0;
+}
 
 #endif
 
diff --git a/arch/arm64/include/asm/hwcap.h b/arch/arm64/include/asm/hwcap.h
index 13f94c8ddfc0..6d567265467c 100644
--- a/arch/arm64/include/asm/hwcap.h
+++ b/arch/arm64/include/asm/hwcap.h
@@ -178,6 +178,7 @@
 #define __khwcap3_feature(x)		(const_ilog2(HWCAP3_ ## x) + 128)
 #define KERNEL_HWCAP_MTE_FAR		__khwcap3_feature(MTE_FAR)
 #define KERNEL_HWCAP_MTE_STORE_ONLY	__khwcap3_feature(MTE_STORE_ONLY)
+#define KERNEL_HWCAP_LSFE		__khwcap3_feature(LSFE)
 
 /*
  * This yields a mask that user programs can use to figure out what
diff --git a/arch/arm64/include/asm/io.h b/arch/arm64/include/asm/io.h
index 9b96840fb979..83e03abbb2ca 100644
--- a/arch/arm64/include/asm/io.h
+++ b/arch/arm64/include/asm/io.h
@@ -274,6 +274,10 @@ int arm64_ioremap_prot_hook_register(const ioremap_prot_hook_t hook);
 #define ioremap_np(addr, size)	\
 	ioremap_prot((addr), (size), __pgprot(PROT_DEVICE_nGnRnE))
 
+
+#define ioremap_encrypted(addr, size)	\
+	ioremap_prot((addr), (size), PAGE_KERNEL)
+
 /*
  * io{read,write}{16,32,64}be() macros
  */
@@ -311,7 +315,7 @@ extern bool arch_memremap_can_ram_remap(resource_size_t offset, size_t size,
 static inline bool arm64_is_protected_mmio(phys_addr_t phys_addr, size_t size)
 {
 	if (unlikely(is_realm_world()))
-		return __arm64_is_protected_mmio(phys_addr, size);
+		return arm64_rsi_is_protected(phys_addr, size);
 	return false;
 }
 
diff --git a/arch/arm64/include/asm/kvm_host.h b/arch/arm64/include/asm/kvm_host.h
index 2f2394cce24e..0ee4f6fa3a17 100644
--- a/arch/arm64/include/asm/kvm_host.h
+++ b/arch/arm64/include/asm/kvm_host.h
@@ -1160,115 +1160,8 @@ u64 kvm_vcpu_apply_reg_masks(const struct kvm_vcpu *, enum vcpu_sysreg, u64);
 		__v;							\
 	})
 
-u64 vcpu_read_sys_reg(const struct kvm_vcpu *vcpu, int reg);
-void vcpu_write_sys_reg(struct kvm_vcpu *vcpu, u64 val, int reg);
-
-static inline bool __vcpu_read_sys_reg_from_cpu(int reg, u64 *val)
-{
-	/*
-	 * *** VHE ONLY ***
-	 *
-	 * System registers listed in the switch are not saved on every
-	 * exit from the guest but are only saved on vcpu_put.
-	 *
-	 * SYSREGS_ON_CPU *MUST* be checked before using this helper.
-	 *
-	 * Note that MPIDR_EL1 for the guest is set by KVM via VMPIDR_EL2 but
-	 * should never be listed below, because the guest cannot modify its
-	 * own MPIDR_EL1 and MPIDR_EL1 is accessed for VCPU A from VCPU B's
-	 * thread when emulating cross-VCPU communication.
-	 */
-	if (!has_vhe())
-		return false;
-
-	switch (reg) {
-	case SCTLR_EL1:		*val = read_sysreg_s(SYS_SCTLR_EL12);	break;
-	case CPACR_EL1:		*val = read_sysreg_s(SYS_CPACR_EL12);	break;
-	case TTBR0_EL1:		*val = read_sysreg_s(SYS_TTBR0_EL12);	break;
-	case TTBR1_EL1:		*val = read_sysreg_s(SYS_TTBR1_EL12);	break;
-	case TCR_EL1:		*val = read_sysreg_s(SYS_TCR_EL12);	break;
-	case TCR2_EL1:		*val = read_sysreg_s(SYS_TCR2_EL12);	break;
-	case PIR_EL1:		*val = read_sysreg_s(SYS_PIR_EL12);	break;
-	case PIRE0_EL1:		*val = read_sysreg_s(SYS_PIRE0_EL12);	break;
-	case POR_EL1:		*val = read_sysreg_s(SYS_POR_EL12);	break;
-	case ESR_EL1:		*val = read_sysreg_s(SYS_ESR_EL12);	break;
-	case AFSR0_EL1:		*val = read_sysreg_s(SYS_AFSR0_EL12);	break;
-	case AFSR1_EL1:		*val = read_sysreg_s(SYS_AFSR1_EL12);	break;
-	case FAR_EL1:		*val = read_sysreg_s(SYS_FAR_EL12);	break;
-	case MAIR_EL1:		*val = read_sysreg_s(SYS_MAIR_EL12);	break;
-	case VBAR_EL1:		*val = read_sysreg_s(SYS_VBAR_EL12);	break;
-	case CONTEXTIDR_EL1:	*val = read_sysreg_s(SYS_CONTEXTIDR_EL12);break;
-	case TPIDR_EL0:		*val = read_sysreg_s(SYS_TPIDR_EL0);	break;
-	case TPIDRRO_EL0:	*val = read_sysreg_s(SYS_TPIDRRO_EL0);	break;
-	case TPIDR_EL1:		*val = read_sysreg_s(SYS_TPIDR_EL1);	break;
-	case AMAIR_EL1:		*val = read_sysreg_s(SYS_AMAIR_EL12);	break;
-	case CNTKCTL_EL1:	*val = read_sysreg_s(SYS_CNTKCTL_EL12);	break;
-	case ELR_EL1:		*val = read_sysreg_s(SYS_ELR_EL12);	break;
-	case SPSR_EL1:		*val = read_sysreg_s(SYS_SPSR_EL12);	break;
-	case PAR_EL1:		*val = read_sysreg_par();		break;
-	case DACR32_EL2:	*val = read_sysreg_s(SYS_DACR32_EL2);	break;
-	case IFSR32_EL2:	*val = read_sysreg_s(SYS_IFSR32_EL2);	break;
-	case DBGVCR32_EL2:	*val = read_sysreg_s(SYS_DBGVCR32_EL2);	break;
-	case ZCR_EL1:		*val = read_sysreg_s(SYS_ZCR_EL12);	break;
-	case SCTLR2_EL1:	*val = read_sysreg_s(SYS_SCTLR2_EL12);	break;
-	default:		return false;
-	}
-
-	return true;
-}
-
-static inline bool __vcpu_write_sys_reg_to_cpu(u64 val, int reg)
-{
-	/*
-	 * *** VHE ONLY ***
-	 *
-	 * System registers listed in the switch are not restored on every
-	 * entry to the guest but are only restored on vcpu_load.
-	 *
-	 * SYSREGS_ON_CPU *MUST* be checked before using this helper.
-	 *
-	 * Note that MPIDR_EL1 for the guest is set by KVM via VMPIDR_EL2 but
-	 * should never be listed below, because the MPIDR should only be set
-	 * once, before running the VCPU, and never changed later.
-	 */
-	if (!has_vhe())
-		return false;
-
-	switch (reg) {
-	case SCTLR_EL1:		write_sysreg_s(val, SYS_SCTLR_EL12);	break;
-	case CPACR_EL1:		write_sysreg_s(val, SYS_CPACR_EL12);	break;
-	case TTBR0_EL1:		write_sysreg_s(val, SYS_TTBR0_EL12);	break;
-	case TTBR1_EL1:		write_sysreg_s(val, SYS_TTBR1_EL12);	break;
-	case TCR_EL1:		write_sysreg_s(val, SYS_TCR_EL12);	break;
-	case TCR2_EL1:		write_sysreg_s(val, SYS_TCR2_EL12);	break;
-	case PIR_EL1:		write_sysreg_s(val, SYS_PIR_EL12);	break;
-	case PIRE0_EL1:		write_sysreg_s(val, SYS_PIRE0_EL12);	break;
-	case POR_EL1:		write_sysreg_s(val, SYS_POR_EL12);	break;
-	case ESR_EL1:		write_sysreg_s(val, SYS_ESR_EL12);	break;
-	case AFSR0_EL1:		write_sysreg_s(val, SYS_AFSR0_EL12);	break;
-	case AFSR1_EL1:		write_sysreg_s(val, SYS_AFSR1_EL12);	break;
-	case FAR_EL1:		write_sysreg_s(val, SYS_FAR_EL12);	break;
-	case MAIR_EL1:		write_sysreg_s(val, SYS_MAIR_EL12);	break;
-	case VBAR_EL1:		write_sysreg_s(val, SYS_VBAR_EL12);	break;
-	case CONTEXTIDR_EL1:	write_sysreg_s(val, SYS_CONTEXTIDR_EL12);break;
-	case TPIDR_EL0:		write_sysreg_s(val, SYS_TPIDR_EL0);	break;
-	case TPIDRRO_EL0:	write_sysreg_s(val, SYS_TPIDRRO_EL0);	break;
-	case TPIDR_EL1:		write_sysreg_s(val, SYS_TPIDR_EL1);	break;
-	case AMAIR_EL1:		write_sysreg_s(val, SYS_AMAIR_EL12);	break;
-	case CNTKCTL_EL1:	write_sysreg_s(val, SYS_CNTKCTL_EL12);	break;
-	case ELR_EL1:		write_sysreg_s(val, SYS_ELR_EL12);	break;
-	case SPSR_EL1:		write_sysreg_s(val, SYS_SPSR_EL12);	break;
-	case PAR_EL1:		write_sysreg_s(val, SYS_PAR_EL1);	break;
-	case DACR32_EL2:	write_sysreg_s(val, SYS_DACR32_EL2);	break;
-	case IFSR32_EL2:	write_sysreg_s(val, SYS_IFSR32_EL2);	break;
-	case DBGVCR32_EL2:	write_sysreg_s(val, SYS_DBGVCR32_EL2);	break;
-	case ZCR_EL1:		write_sysreg_s(val, SYS_ZCR_EL12);	break;
-	case SCTLR2_EL1:	write_sysreg_s(val, SYS_SCTLR2_EL12);	break;
-	default:		return false;
-	}
-
-	return true;
-}
+u64 vcpu_read_sys_reg(const struct kvm_vcpu *, enum vcpu_sysreg);
+void vcpu_write_sys_reg(struct kvm_vcpu *, u64, enum vcpu_sysreg);
 
 struct kvm_vm_stat {
 	struct kvm_vm_stat_generic generic;
@@ -1476,6 +1369,7 @@ static inline bool kvm_system_needs_idmapped_vectors(void)
 }
 
 void kvm_init_host_debug_data(void);
+void kvm_debug_init_vhe(void);
 void kvm_vcpu_load_debug(struct kvm_vcpu *vcpu);
 void kvm_vcpu_put_debug(struct kvm_vcpu *vcpu);
 void kvm_debug_set_guest_ownership(struct kvm_vcpu *vcpu);
diff --git a/arch/arm64/include/asm/kvm_mmu.h b/arch/arm64/include/asm/kvm_mmu.h
index ae563ebd6aee..e4069f2ce642 100644
--- a/arch/arm64/include/asm/kvm_mmu.h
+++ b/arch/arm64/include/asm/kvm_mmu.h
@@ -180,6 +180,7 @@ void kvm_free_stage2_pgd(struct kvm_s2_mmu *mmu);
 int kvm_phys_addr_ioremap(struct kvm *kvm, phys_addr_t guest_ipa,
 			  phys_addr_t pa, unsigned long size, bool writable);
 
+int kvm_handle_guest_sea(struct kvm_vcpu *vcpu);
 int kvm_handle_guest_abort(struct kvm_vcpu *vcpu);
 
 phys_addr_t kvm_mmu_get_httbr(void);
diff --git a/arch/arm64/include/asm/kvm_ras.h b/arch/arm64/include/asm/kvm_ras.h
deleted file mode 100644
index 9398ade632aa..000000000000
--- a/arch/arm64/include/asm/kvm_ras.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/* Copyright (C) 2018 - Arm Ltd */
-
-#ifndef __ARM64_KVM_RAS_H__
-#define __ARM64_KVM_RAS_H__
-
-#include <linux/acpi.h>
-#include <linux/errno.h>
-#include <linux/types.h>
-
-#include <asm/acpi.h>
-
-/*
- * Was this synchronous external abort a RAS notification?
- * Returns '0' for errors handled by some RAS subsystem, or -ENOENT.
- */
-static inline int kvm_handle_guest_sea(void)
-{
-	/* apei_claim_sea(NULL) expects to mask interrupts itself */
-	lockdep_assert_irqs_enabled();
-
-	return apei_claim_sea(NULL);
-}
-
-#endif /* __ARM64_KVM_RAS_H__ */
diff --git a/arch/arm64/include/asm/mmu.h b/arch/arm64/include/asm/mmu.h
index 6e8aa8e72601..ff6fd0bbd7d2 100644
--- a/arch/arm64/include/asm/mmu.h
+++ b/arch/arm64/include/asm/mmu.h
@@ -17,6 +17,13 @@
 #include <linux/refcount.h>
 #include <asm/cpufeature.h>
 
+enum pgtable_type {
+	TABLE_PTE,
+	TABLE_PMD,
+	TABLE_PUD,
+	TABLE_P4D,
+};
+
 typedef struct {
 	atomic64_t	id;
 #ifdef CONFIG_COMPAT
@@ -71,6 +78,9 @@ extern void create_pgd_mapping(struct mm_struct *mm, phys_addr_t phys,
 			       pgprot_t prot, bool page_mappings_only);
 extern void *fixmap_remap_fdt(phys_addr_t dt_phys, int *size, pgprot_t prot);
 extern void mark_linear_text_alias_ro(void);
+extern int split_kernel_leaf_mapping(unsigned long start, unsigned long end);
+extern void init_idmap_kpti_bbml2_flag(void);
+extern void linear_map_maybe_split_to_ptes(void);
 
 /*
  * This check is triggered during the early boot before the cpufeature
diff --git a/arch/arm64/include/asm/module.h b/arch/arm64/include/asm/module.h
index 79550b22ba19..fb9b88eebeb1 100644
--- a/arch/arm64/include/asm/module.h
+++ b/arch/arm64/include/asm/module.h
@@ -19,6 +19,7 @@ struct mod_arch_specific {
 
 	/* for CONFIG_DYNAMIC_FTRACE */
 	struct plt_entry	*ftrace_trampolines;
+	struct plt_entry	*init_ftrace_trampolines;
 };
 
 u64 module_emit_plt_entry(struct module *mod, Elf64_Shdr *sechdrs,
diff --git a/arch/arm64/include/asm/module.lds.h b/arch/arm64/include/asm/module.lds.h
index b9ae8349e35d..fb944b46846d 100644
--- a/arch/arm64/include/asm/module.lds.h
+++ b/arch/arm64/include/asm/module.lds.h
@@ -2,6 +2,7 @@ SECTIONS {
 	.plt 0 : { BYTE(0) }
 	.init.plt 0 : { BYTE(0) }
 	.text.ftrace_trampoline 0 : { BYTE(0) }
+	.init.text.ftrace_trampoline 0 : { BYTE(0) }
 
 #ifdef CONFIG_KASAN_SW_TAGS
 	/*
diff --git a/arch/arm64/include/asm/pgtable.h b/arch/arm64/include/asm/pgtable.h
index abd2dee416b3..aa89c2e67ebc 100644
--- a/arch/arm64/include/asm/pgtable.h
+++ b/arch/arm64/include/asm/pgtable.h
@@ -371,6 +371,11 @@ static inline pmd_t pmd_mkcont(pmd_t pmd)
 	return __pmd(pmd_val(pmd) | PMD_SECT_CONT);
 }
 
+static inline pmd_t pmd_mknoncont(pmd_t pmd)
+{
+	return __pmd(pmd_val(pmd) & ~PMD_SECT_CONT);
+}
+
 #ifdef CONFIG_HAVE_ARCH_USERFAULTFD_WP
 static inline int pte_uffd_wp(pte_t pte)
 {
diff --git a/arch/arm64/include/asm/preempt.h b/arch/arm64/include/asm/preempt.h
index 0159b625cc7f..932ea4b62042 100644
--- a/arch/arm64/include/asm/preempt.h
+++ b/arch/arm64/include/asm/preempt.h
@@ -2,7 +2,6 @@
 #ifndef __ASM_PREEMPT_H
 #define __ASM_PREEMPT_H
 
-#include <linux/jump_label.h>
 #include <linux/thread_info.h>
 
 #define PREEMPT_NEED_RESCHED	BIT(32)
@@ -87,7 +86,6 @@ void preempt_schedule_notrace(void);
 
 #ifdef CONFIG_PREEMPT_DYNAMIC
 
-DECLARE_STATIC_KEY_TRUE(sk_dynamic_irqentry_exit_cond_resched);
 void dynamic_preempt_schedule(void);
 #define __preempt_schedule()		dynamic_preempt_schedule()
 void dynamic_preempt_schedule_notrace(void);
diff --git a/arch/arm64/include/asm/ptdump.h b/arch/arm64/include/asm/ptdump.h
index fded5358641f..baff24004459 100644
--- a/arch/arm64/include/asm/ptdump.h
+++ b/arch/arm64/include/asm/ptdump.h
@@ -7,6 +7,8 @@
 
 #include <linux/ptdump.h>
 
+DECLARE_STATIC_KEY_FALSE(arm64_ptdump_lock_key);
+
 #ifdef CONFIG_PTDUMP
 
 #include <linux/mm_types.h>
diff --git a/arch/arm64/include/asm/ptrace.h b/arch/arm64/include/asm/ptrace.h
index 47ff8654c5ec..65b053a24d82 100644
--- a/arch/arm64/include/asm/ptrace.h
+++ b/arch/arm64/include/asm/ptrace.h
@@ -169,10 +169,6 @@ struct pt_regs {
 
 	u64 sdei_ttbr1;
 	struct frame_record_meta stackframe;
-
-	/* Only valid for some EL1 exceptions. */
-	u64 lockdep_hardirqs;
-	u64 exit_rcu;
 };
 
 /* For correct stack alignment, pt_regs has to be a multiple of 16 bytes. */
@@ -214,11 +210,12 @@ static inline void forget_syscall(struct pt_regs *regs)
 		(regs)->pmr == GIC_PRIO_IRQON :				\
 		true)
 
-#define interrupts_enabled(regs)			\
-	(!((regs)->pstate & PSR_I_BIT) && irqs_priority_unmasked(regs))
+static __always_inline bool regs_irqs_disabled(const struct pt_regs *regs)
+{
+	return (regs->pstate & PSR_I_BIT) || !irqs_priority_unmasked(regs);
+}
 
-#define fast_interrupts_enabled(regs) \
-	(!((regs)->pstate & PSR_F_BIT))
+#define interrupts_enabled(regs)	(!regs_irqs_disabled(regs))
 
 static inline unsigned long user_stack_pointer(struct pt_regs *regs)
 {
diff --git a/arch/arm64/include/asm/rsi.h b/arch/arm64/include/asm/rsi.h
index b42aeac05340..88b50d660e85 100644
--- a/arch/arm64/include/asm/rsi.h
+++ b/arch/arm64/include/asm/rsi.h
@@ -16,7 +16,7 @@ DECLARE_STATIC_KEY_FALSE(rsi_present);
 
 void __init arm64_rsi_init(void);
 
-bool __arm64_is_protected_mmio(phys_addr_t base, size_t size);
+bool arm64_rsi_is_protected(phys_addr_t base, size_t size);
 
 static inline bool is_realm_world(void)
 {
diff --git a/arch/arm64/include/asm/setup.h b/arch/arm64/include/asm/setup.h
index ba269a7a3201..3d96dde4d214 100644
--- a/arch/arm64/include/asm/setup.h
+++ b/arch/arm64/include/asm/setup.h
@@ -21,7 +21,7 @@ static inline bool arch_parse_debug_rodata(char *arg)
 	if (!arg)
 		return false;
 
-	if (!strcmp(arg, "full")) {
+	if (!strcmp(arg, "on")) {
 		rodata_enabled = rodata_full = true;
 		return true;
 	}
@@ -31,7 +31,7 @@ static inline bool arch_parse_debug_rodata(char *arg)
 		return true;
 	}
 
-	if (!strcmp(arg, "on")) {
+	if (!strcmp(arg, "noalias")) {
 		rodata_enabled = true;
 		rodata_full = false;
 		return true;
diff --git a/arch/arm64/include/asm/sysreg.h b/arch/arm64/include/asm/sysreg.h
index d5b5f2ae1afa..6455db1b54fd 100644
--- a/arch/arm64/include/asm/sysreg.h
+++ b/arch/arm64/include/asm/sysreg.h
@@ -281,8 +281,6 @@
 #define SYS_RGSR_EL1			sys_reg(3, 0, 1, 0, 5)
 #define SYS_GCR_EL1			sys_reg(3, 0, 1, 0, 6)
 
-#define SYS_TCR_EL1			sys_reg(3, 0, 2, 0, 2)
-
 #define SYS_APIAKEYLO_EL1		sys_reg(3, 0, 2, 1, 0)
 #define SYS_APIAKEYHI_EL1		sys_reg(3, 0, 2, 1, 1)
 #define SYS_APIBKEYLO_EL1		sys_reg(3, 0, 2, 1, 2)
@@ -344,15 +342,6 @@
 #define SYS_PAR_EL1_ATTR		GENMASK_ULL(63, 56)
 #define SYS_PAR_EL1_F0_RES0		(GENMASK_ULL(6, 1) | GENMASK_ULL(55, 52))
 
-/*** Statistical Profiling Extension ***/
-#define PMSEVFR_EL1_RES0_IMP	\
-	(GENMASK_ULL(47, 32) | GENMASK_ULL(23, 16) | GENMASK_ULL(11, 8) |\
-	 BIT_ULL(6) | BIT_ULL(4) | BIT_ULL(2) | BIT_ULL(0))
-#define PMSEVFR_EL1_RES0_V1P1	\
-	(PMSEVFR_EL1_RES0_IMP & ~(BIT_ULL(18) | BIT_ULL(17) | BIT_ULL(11)))
-#define PMSEVFR_EL1_RES0_V1P2	\
-	(PMSEVFR_EL1_RES0_V1P1 & ~BIT_ULL(6))
-
 /* Buffer error reporting */
 #define PMBSR_EL1_FAULT_FSC_SHIFT	PMBSR_EL1_MSS_SHIFT
 #define PMBSR_EL1_FAULT_FSC_MASK	PMBSR_EL1_MSS_MASK
@@ -1142,9 +1131,6 @@
 
 #define ARM64_FEATURE_FIELD_BITS	4
 
-/* Defined for compatibility only, do not add new users. */
-#define ARM64_FEATURE_MASK(x)	(x##_MASK)
-
 #ifdef __ASSEMBLY__
 
 	.macro	mrs_s, rt, sreg
diff --git a/arch/arm64/include/asm/uaccess.h b/arch/arm64/include/asm/uaccess.h
index 5b91803201ef..1aa4ecb73429 100644
--- a/arch/arm64/include/asm/uaccess.h
+++ b/arch/arm64/include/asm/uaccess.h
@@ -502,44 +502,4 @@ static inline size_t probe_subpage_writeable(const char __user *uaddr,
 
 #endif /* CONFIG_ARCH_HAS_SUBPAGE_FAULTS */
 
-#ifdef CONFIG_ARM64_GCS
-
-static inline int gcssttr(unsigned long __user *addr, unsigned long val)
-{
-	register unsigned long __user *_addr __asm__ ("x0") = addr;
-	register unsigned long _val __asm__ ("x1") = val;
-	int err = 0;
-
-	/* GCSSTTR x1, x0 */
-	asm volatile(
-		"1: .inst 0xd91f1c01\n"
-		"2: \n"
-		_ASM_EXTABLE_UACCESS_ERR(1b, 2b, %w0)
-		: "+r" (err)
-		: "rZ" (_val), "r" (_addr)
-		: "memory");
-
-	return err;
-}
-
-static inline void put_user_gcs(unsigned long val, unsigned long __user *addr,
-				int *err)
-{
-	int ret;
-
-	if (!access_ok((char __user *)addr, sizeof(u64))) {
-		*err = -EFAULT;
-		return;
-	}
-
-	uaccess_ttbr0_enable();
-	ret = gcssttr(addr, val);
-	if (ret != 0)
-		*err = ret;
-	uaccess_ttbr0_disable();
-}
-
-
-#endif /* CONFIG_ARM64_GCS */
-
 #endif /* __ASM_UACCESS_H */
diff --git a/arch/arm64/include/asm/vdso/compat_barrier.h b/arch/arm64/include/asm/vdso/compat_barrier.h
index 3ac35f4a667c..6d75e03d3827 100644
--- a/arch/arm64/include/asm/vdso/compat_barrier.h
+++ b/arch/arm64/include/asm/vdso/compat_barrier.h
@@ -7,11 +7,10 @@
 
 #ifndef __ASSEMBLY__
 /*
- * Warning: This code is meant to be used with
- * ENABLE_COMPAT_VDSO only.
+ * Warning: This code is meant to be used from the compat vDSO only.
  */
-#ifndef ENABLE_COMPAT_VDSO
-#error This header is meant to be used with ENABLE_COMPAT_VDSO only
+#ifdef __arch64__
+#error This header is meant to be used with from the compat vDSO only
 #endif
 
 #ifdef dmb
diff --git a/arch/arm64/include/asm/vdso/compat_gettimeofday.h b/arch/arm64/include/asm/vdso/compat_gettimeofday.h
index d60ea7a72a9c..7d1a116549b1 100644
--- a/arch/arm64/include/asm/vdso/compat_gettimeofday.h
+++ b/arch/arm64/include/asm/vdso/compat_gettimeofday.h
@@ -2,8 +2,8 @@
 /*
  * Copyright (C) 2018 ARM Limited
  */
-#ifndef __ASM_VDSO_GETTIMEOFDAY_H
-#define __ASM_VDSO_GETTIMEOFDAY_H
+#ifndef __ASM_VDSO_COMPAT_GETTIMEOFDAY_H
+#define __ASM_VDSO_COMPAT_GETTIMEOFDAY_H
 
 #ifndef __ASSEMBLY__
 
@@ -163,4 +163,4 @@ static inline bool vdso_clocksource_ok(const struct vdso_clock *vc)
 
 #endif /* !__ASSEMBLY__ */
 
-#endif /* __ASM_VDSO_GETTIMEOFDAY_H */
+#endif /* __ASM_VDSO_COMPAT_GETTIMEOFDAY_H */
diff --git a/arch/arm64/include/asm/vdso/gettimeofday.h b/arch/arm64/include/asm/vdso/gettimeofday.h
index da1ab8759592..c59e84105b43 100644
--- a/arch/arm64/include/asm/vdso/gettimeofday.h
+++ b/arch/arm64/include/asm/vdso/gettimeofday.h
@@ -5,6 +5,8 @@
 #ifndef __ASM_VDSO_GETTIMEOFDAY_H
 #define __ASM_VDSO_GETTIMEOFDAY_H
 
+#ifdef __aarch64__
+
 #ifndef __ASSEMBLY__
 
 #include <asm/alternative.h>
@@ -96,4 +98,10 @@ static __always_inline const struct vdso_time_data *__arch_get_vdso_u_time_data(
 
 #endif /* !__ASSEMBLY__ */
 
+#else /* !__aarch64__ */
+
+#include "compat_gettimeofday.h"
+
+#endif /* __aarch64__ */
+
 #endif /* __ASM_VDSO_GETTIMEOFDAY_H */
diff --git a/arch/arm64/include/asm/vmalloc.h b/arch/arm64/include/asm/vmalloc.h
index 12f534e8f3ed..4ec1acd3c1b3 100644
--- a/arch/arm64/include/asm/vmalloc.h
+++ b/arch/arm64/include/asm/vmalloc.h
@@ -9,18 +9,13 @@
 #define arch_vmap_pud_supported arch_vmap_pud_supported
 static inline bool arch_vmap_pud_supported(pgprot_t prot)
 {
-	/*
-	 * SW table walks can't handle removal of intermediate entries.
-	 */
-	return pud_sect_supported() &&
-	       !IS_ENABLED(CONFIG_PTDUMP_DEBUGFS);
+	return pud_sect_supported();
 }
 
 #define arch_vmap_pmd_supported arch_vmap_pmd_supported
 static inline bool arch_vmap_pmd_supported(pgprot_t prot)
 {
-	/* See arch_vmap_pud_supported() */
-	return !IS_ENABLED(CONFIG_PTDUMP_DEBUGFS);
+	return true;
 }
 
 #define arch_vmap_pte_range_map_size arch_vmap_pte_range_map_size
diff --git a/arch/arm64/include/asm/xen/events.h b/arch/arm64/include/asm/xen/events.h
index 2788e95d0ff0..2977b5fe068d 100644
--- a/arch/arm64/include/asm/xen/events.h
+++ b/arch/arm64/include/asm/xen/events.h
@@ -14,7 +14,7 @@ enum ipi_vector {
 
 static inline int xen_irqs_disabled(struct pt_regs *regs)
 {
-	return !interrupts_enabled(regs);
+	return regs_irqs_disabled(regs);
 }
 
 #define xchg_xen_ulong(ptr, val) xchg((ptr), (val))
diff --git a/arch/arm64/include/uapi/asm/bitsperlong.h b/arch/arm64/include/uapi/asm/bitsperlong.h
index 485d60bee26c..d59730975f30 100644
--- a/arch/arm64/include/uapi/asm/bitsperlong.h
+++ b/arch/arm64/include/uapi/asm/bitsperlong.h
@@ -17,7 +17,12 @@
 #ifndef __ASM_BITSPERLONG_H
 #define __ASM_BITSPERLONG_H
 
+#if defined(__KERNEL__) && !defined(__aarch64__)
+/* Used by the compat vDSO */
+#define __BITS_PER_LONG 32
+#else
 #define __BITS_PER_LONG 64
+#endif
 
 #include <asm-generic/bitsperlong.h>
 
diff --git a/arch/arm64/include/uapi/asm/hwcap.h b/arch/arm64/include/uapi/asm/hwcap.h
index 72c78468b806..575564ecdb0b 100644
--- a/arch/arm64/include/uapi/asm/hwcap.h
+++ b/arch/arm64/include/uapi/asm/hwcap.h
@@ -145,5 +145,6 @@
  */
 #define HWCAP3_MTE_FAR		(1UL << 0)
 #define HWCAP3_MTE_STORE_ONLY		(1UL << 1)
+#define HWCAP3_LSFE		(1UL << 2)
 
 #endif /* _UAPI__ASM_HWCAP_H */
diff --git a/arch/arm64/kernel/acpi.c b/arch/arm64/kernel/acpi.c
index 4d529ff7ba51..7aca29e1d30b 100644
--- a/arch/arm64/kernel/acpi.c
+++ b/arch/arm64/kernel/acpi.c
@@ -357,6 +357,16 @@ void __iomem *acpi_os_ioremap(acpi_physical_address phys, acpi_size size)
 			 * as long as we take care not to create a writable
 			 * mapping for executable code.
 			 */
+			fallthrough;
+
+		case EFI_ACPI_MEMORY_NVS:
+			/*
+			 * ACPI NVS marks an area reserved for use by the
+			 * firmware, even after exiting the boot service.
+			 * This may be used by the firmware for sharing dynamic
+			 * tables/data (e.g., ACPI CCEL) with the OS. Map it
+			 * as read-only.
+			 */
 			prot = PAGE_KERNEL_RO;
 			break;
 
@@ -407,7 +417,7 @@ int apei_claim_sea(struct pt_regs *regs)
 	return_to_irqs_enabled = !irqs_disabled_flags(arch_local_save_flags());
 
 	if (regs)
-		return_to_irqs_enabled = interrupts_enabled(regs);
+		return_to_irqs_enabled = !regs_irqs_disabled(regs);
 
 	/*
 	 * SEA can interrupt SError, mask it and describe this as an NMI so
diff --git a/arch/arm64/kernel/asm-offsets.c b/arch/arm64/kernel/asm-offsets.c
index 30d4bbe68661..b6367ff3a49c 100644
--- a/arch/arm64/kernel/asm-offsets.c
+++ b/arch/arm64/kernel/asm-offsets.c
@@ -6,6 +6,7 @@
  *               2001-2002 Keith Owens
  * Copyright (C) 2012 ARM Ltd.
  */
+#define COMPILE_OFFSETS
 
 #include <linux/arm_sdei.h>
 #include <linux/sched.h>
diff --git a/arch/arm64/kernel/cpu_errata.c b/arch/arm64/kernel/cpu_errata.c
index 59d723c9ab8f..8cb3b575a031 100644
--- a/arch/arm64/kernel/cpu_errata.c
+++ b/arch/arm64/kernel/cpu_errata.c
@@ -531,6 +531,7 @@ static const struct midr_range erratum_spec_ssbs_list[] = {
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_A710),
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_A715),
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_A720),
+	MIDR_ALL_VERSIONS(MIDR_CORTEX_A720AE),
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_A725),
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_X1),
 	MIDR_ALL_VERSIONS(MIDR_CORTEX_X1C),
@@ -545,6 +546,7 @@ static const struct midr_range erratum_spec_ssbs_list[] = {
 	MIDR_ALL_VERSIONS(MIDR_NEOVERSE_V1),
 	MIDR_ALL_VERSIONS(MIDR_NEOVERSE_V2),
 	MIDR_ALL_VERSIONS(MIDR_NEOVERSE_V3),
+	MIDR_ALL_VERSIONS(MIDR_NEOVERSE_V3AE),
 	{}
 };
 #endif
diff --git a/arch/arm64/kernel/cpufeature.c b/arch/arm64/kernel/cpufeature.c
index 9ad065f15f1d..63cd05e6973d 100644
--- a/arch/arm64/kernel/cpufeature.c
+++ b/arch/arm64/kernel/cpufeature.c
@@ -84,6 +84,7 @@
 #include <asm/hwcap.h>
 #include <asm/insn.h>
 #include <asm/kvm_host.h>
+#include <asm/mmu.h>
 #include <asm/mmu_context.h>
 #include <asm/mte.h>
 #include <asm/hypervisor.h>
@@ -278,6 +279,7 @@ static const struct arm64_ftr_bits ftr_id_aa64isar2[] = {
 
 static const struct arm64_ftr_bits ftr_id_aa64isar3[] = {
 	ARM64_FTR_BITS(FTR_VISIBLE, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64ISAR3_EL1_FPRCVT_SHIFT, 4, 0),
+	ARM64_FTR_BITS(FTR_VISIBLE, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64ISAR3_EL1_LSFE_SHIFT, 4, 0),
 	ARM64_FTR_BITS(FTR_VISIBLE, FTR_NONSTRICT, FTR_LOWER_SAFE, ID_AA64ISAR3_EL1_FAMINMAX_SHIFT, 4, 0),
 	ARM64_FTR_END,
 };
@@ -1945,11 +1947,11 @@ static bool has_pmuv3(const struct arm64_cpu_capabilities *entry, int scope)
 extern
 void create_kpti_ng_temp_pgd(pgd_t *pgdir, phys_addr_t phys, unsigned long virt,
 			     phys_addr_t size, pgprot_t prot,
-			     phys_addr_t (*pgtable_alloc)(int), int flags);
+			     phys_addr_t (*pgtable_alloc)(enum pgtable_type), int flags);
 
 static phys_addr_t __initdata kpti_ng_temp_alloc;
 
-static phys_addr_t __init kpti_ng_pgd_alloc(int shift)
+static phys_addr_t __init kpti_ng_pgd_alloc(enum pgtable_type type)
 {
 	kpti_ng_temp_alloc -= PAGE_SIZE;
 	return kpti_ng_temp_alloc;
@@ -2027,6 +2029,7 @@ static void __init kpti_install_ng_mappings(void)
 	if (arm64_use_ng_mappings)
 		return;
 
+	init_idmap_kpti_bbml2_flag();
 	stop_machine(__kpti_install_ng_mappings, NULL, cpu_online_mask);
 }
 
@@ -2217,7 +2220,7 @@ static bool hvhe_possible(const struct arm64_cpu_capabilities *entry,
 	return arm64_test_sw_feature_override(ARM64_SW_FEATURE_OVERRIDE_HVHE);
 }
 
-static bool has_bbml2_noabort(const struct arm64_cpu_capabilities *caps, int scope)
+bool cpu_supports_bbml2_noabort(void)
 {
 	/*
 	 * We want to allow usage of BBML2 in as wide a range of kernel contexts
@@ -2234,6 +2237,10 @@ static bool has_bbml2_noabort(const struct arm64_cpu_capabilities *caps, int sco
 	static const struct midr_range supports_bbml2_noabort_list[] = {
 		MIDR_REV_RANGE(MIDR_CORTEX_X4, 0, 3, 0xf),
 		MIDR_REV_RANGE(MIDR_NEOVERSE_V3, 0, 2, 0xf),
+		MIDR_REV_RANGE(MIDR_NEOVERSE_V3AE, 0, 2, 0xf),
+		MIDR_ALL_VERSIONS(MIDR_NVIDIA_OLYMPUS),
+		MIDR_ALL_VERSIONS(MIDR_AMPERE1),
+		MIDR_ALL_VERSIONS(MIDR_AMPERE1A),
 		{}
 	};
 
@@ -2249,6 +2256,11 @@ static bool has_bbml2_noabort(const struct arm64_cpu_capabilities *caps, int sco
 	return true;
 }
 
+static bool has_bbml2_noabort(const struct arm64_cpu_capabilities *caps, int scope)
+{
+	return cpu_supports_bbml2_noabort();
+}
+
 #ifdef CONFIG_ARM64_PAN
 static void cpu_enable_pan(const struct arm64_cpu_capabilities *__unused)
 {
@@ -2269,6 +2281,24 @@ static void cpu_clear_disr(const struct arm64_cpu_capabilities *__unused)
 	/* Firmware may have left a deferred SError in this register. */
 	write_sysreg_s(0, SYS_DISR_EL1);
 }
+static bool has_rasv1p1(const struct arm64_cpu_capabilities *__unused, int scope)
+{
+	const struct arm64_cpu_capabilities rasv1p1_caps[] = {
+		{
+			ARM64_CPUID_FIELDS(ID_AA64PFR0_EL1, RAS, V1P1)
+		},
+		{
+			ARM64_CPUID_FIELDS(ID_AA64PFR0_EL1, RAS, IMP)
+		},
+		{
+			ARM64_CPUID_FIELDS(ID_AA64PFR1_EL1, RAS_frac, RASv1p1)
+		},
+	};
+
+	return (has_cpuid_feature(&rasv1p1_caps[0], scope) ||
+		(has_cpuid_feature(&rasv1p1_caps[1], scope) &&
+		 has_cpuid_feature(&rasv1p1_caps[2], scope)));
+}
 #endif /* CONFIG_ARM64_RAS_EXTN */
 
 #ifdef CONFIG_ARM64_PTR_AUTH
@@ -2687,6 +2717,12 @@ static const struct arm64_cpu_capabilities arm64_features[] = {
 		.cpu_enable = cpu_clear_disr,
 		ARM64_CPUID_FIELDS(ID_AA64PFR0_EL1, RAS, IMP)
 	},
+	{
+		.desc = "RASv1p1 Extension Support",
+		.capability = ARM64_HAS_RASV1P1_EXTN,
+		.type = ARM64_CPUCAP_SYSTEM_FEATURE,
+		.matches = has_rasv1p1,
+	},
 #endif /* CONFIG_ARM64_RAS_EXTN */
 #ifdef CONFIG_ARM64_AMU_EXTN
 	{
@@ -3252,6 +3288,7 @@ static const struct arm64_cpu_capabilities arm64_elf_hwcaps[] = {
 	HWCAP_CAP(ID_AA64ISAR1_EL1, I8MM, IMP, CAP_HWCAP, KERNEL_HWCAP_I8MM),
 	HWCAP_CAP(ID_AA64ISAR2_EL1, LUT, IMP, CAP_HWCAP, KERNEL_HWCAP_LUT),
 	HWCAP_CAP(ID_AA64ISAR3_EL1, FAMINMAX, IMP, CAP_HWCAP, KERNEL_HWCAP_FAMINMAX),
+	HWCAP_CAP(ID_AA64ISAR3_EL1, LSFE, IMP, CAP_HWCAP, KERNEL_HWCAP_LSFE),
 	HWCAP_CAP(ID_AA64MMFR2_EL1, AT, IMP, CAP_HWCAP, KERNEL_HWCAP_USCAT),
 #ifdef CONFIG_ARM64_SVE
 	HWCAP_CAP(ID_AA64PFR0_EL1, SVE, IMP, CAP_HWCAP, KERNEL_HWCAP_SVE),
@@ -3923,6 +3960,7 @@ void __init setup_system_features(void)
 {
 	setup_system_capabilities();
 
+	linear_map_maybe_split_to_ptes();
 	kpti_install_ng_mappings();
 
 	sve_setup();
diff --git a/arch/arm64/kernel/cpuinfo.c b/arch/arm64/kernel/cpuinfo.c
index ba834909a28b..c44e6d94f5de 100644
--- a/arch/arm64/kernel/cpuinfo.c
+++ b/arch/arm64/kernel/cpuinfo.c
@@ -162,6 +162,7 @@ static const char *const hwcap_str[] = {
 	[KERNEL_HWCAP_SME_SMOP4]	= "smesmop4",
 	[KERNEL_HWCAP_MTE_FAR]		= "mtefar",
 	[KERNEL_HWCAP_MTE_STORE_ONLY]	= "mtestoreonly",
+	[KERNEL_HWCAP_LSFE]		= "lsfe",
 };
 
 #ifdef CONFIG_COMPAT
diff --git a/arch/arm64/kernel/debug-monitors.c b/arch/arm64/kernel/debug-monitors.c
index 110d9ff54174..29307642f4c9 100644
--- a/arch/arm64/kernel/debug-monitors.c
+++ b/arch/arm64/kernel/debug-monitors.c
@@ -167,7 +167,7 @@ static void send_user_sigtrap(int si_code)
 	if (WARN_ON(!user_mode(regs)))
 		return;
 
-	if (interrupts_enabled(regs))
+	if (!regs_irqs_disabled(regs))
 		local_irq_enable();
 
 	arm64_force_sig_fault(SIGTRAP, si_code, instruction_pointer(regs),
@@ -212,7 +212,7 @@ static int call_el1_break_hook(struct pt_regs *regs, unsigned long esr)
 	if (esr_brk_comment(esr) == BUG_BRK_IMM)
 		return bug_brk_handler(regs, esr);
 
-	if (IS_ENABLED(CONFIG_CFI_CLANG) && esr_is_cfi_brk(esr))
+	if (IS_ENABLED(CONFIG_CFI) && esr_is_cfi_brk(esr))
 		return cfi_brk_handler(regs, esr);
 
 	if (esr_brk_comment(esr) == FAULT_BRK_IMM)
diff --git a/arch/arm64/kernel/entry-common.c b/arch/arm64/kernel/entry-common.c
index 2b0c5925502e..f546a914f041 100644
--- a/arch/arm64/kernel/entry-common.c
+++ b/arch/arm64/kernel/entry-common.c
@@ -6,6 +6,7 @@
  */
 
 #include <linux/context_tracking.h>
+#include <linux/irq-entry-common.h>
 #include <linux/kasan.h>
 #include <linux/linkage.h>
 #include <linux/livepatch.h>
@@ -37,29 +38,20 @@
  * This is intended to match the logic in irqentry_enter(), handling the kernel
  * mode transitions only.
  */
-static __always_inline void __enter_from_kernel_mode(struct pt_regs *regs)
+static __always_inline irqentry_state_t __enter_from_kernel_mode(struct pt_regs *regs)
 {
-	regs->exit_rcu = false;
-
-	if (!IS_ENABLED(CONFIG_TINY_RCU) && is_idle_task(current)) {
-		lockdep_hardirqs_off(CALLER_ADDR0);
-		ct_irq_enter();
-		trace_hardirqs_off_finish();
-
-		regs->exit_rcu = true;
-		return;
-	}
-
-	lockdep_hardirqs_off(CALLER_ADDR0);
-	rcu_irq_enter_check_tick();
-	trace_hardirqs_off_finish();
+	return irqentry_enter(regs);
 }
 
-static void noinstr enter_from_kernel_mode(struct pt_regs *regs)
+static noinstr irqentry_state_t enter_from_kernel_mode(struct pt_regs *regs)
 {
-	__enter_from_kernel_mode(regs);
+	irqentry_state_t state;
+
+	state = __enter_from_kernel_mode(regs);
 	mte_check_tfsr_entry();
 	mte_disable_tco_entry(current);
+
+	return state;
 }
 
 /*
@@ -70,30 +62,17 @@ static void noinstr enter_from_kernel_mode(struct pt_regs *regs)
  * This is intended to match the logic in irqentry_exit(), handling the kernel
  * mode transitions only, and with preemption handled elsewhere.
  */
-static __always_inline void __exit_to_kernel_mode(struct pt_regs *regs)
-{
-	lockdep_assert_irqs_disabled();
-
-	if (interrupts_enabled(regs)) {
-		if (regs->exit_rcu) {
-			trace_hardirqs_on_prepare();
-			lockdep_hardirqs_on_prepare();
-			ct_irq_exit();
-			lockdep_hardirqs_on(CALLER_ADDR0);
-			return;
-		}
-
-		trace_hardirqs_on();
-	} else {
-		if (regs->exit_rcu)
-			ct_irq_exit();
-	}
+static __always_inline void __exit_to_kernel_mode(struct pt_regs *regs,
+						  irqentry_state_t state)
+{
+	irqentry_exit(regs, state);
 }
 
-static void noinstr exit_to_kernel_mode(struct pt_regs *regs)
+static void noinstr exit_to_kernel_mode(struct pt_regs *regs,
+					irqentry_state_t state)
 {
 	mte_check_tfsr_exit();
-	__exit_to_kernel_mode(regs);
+	__exit_to_kernel_mode(regs, state);
 }
 
 /*
@@ -101,18 +80,15 @@ static void noinstr exit_to_kernel_mode(struct pt_regs *regs)
  * Before this function is called it is not safe to call regular kernel code,
  * instrumentable code, or any code which may trigger an exception.
  */
-static __always_inline void __enter_from_user_mode(void)
+static __always_inline void __enter_from_user_mode(struct pt_regs *regs)
 {
-	lockdep_hardirqs_off(CALLER_ADDR0);
-	CT_WARN_ON(ct_state() != CT_STATE_USER);
-	user_exit_irqoff();
-	trace_hardirqs_off_finish();
+	enter_from_user_mode(regs);
 	mte_disable_tco_entry(current);
 }
 
-static __always_inline void enter_from_user_mode(struct pt_regs *regs)
+static __always_inline void arm64_enter_from_user_mode(struct pt_regs *regs)
 {
-	__enter_from_user_mode();
+	__enter_from_user_mode(regs);
 }
 
 /*
@@ -120,113 +96,19 @@ static __always_inline void enter_from_user_mode(struct pt_regs *regs)
  * After this function returns it is not safe to call regular kernel code,
  * instrumentable code, or any code which may trigger an exception.
  */
-static __always_inline void __exit_to_user_mode(void)
-{
-	trace_hardirqs_on_prepare();
-	lockdep_hardirqs_on_prepare();
-	user_enter_irqoff();
-	lockdep_hardirqs_on(CALLER_ADDR0);
-}
-
-static void do_notify_resume(struct pt_regs *regs, unsigned long thread_flags)
-{
-	do {
-		local_irq_enable();
-
-		if (thread_flags & (_TIF_NEED_RESCHED | _TIF_NEED_RESCHED_LAZY))
-			schedule();
-
-		if (thread_flags & _TIF_UPROBE)
-			uprobe_notify_resume(regs);
-
-		if (thread_flags & _TIF_MTE_ASYNC_FAULT) {
-			clear_thread_flag(TIF_MTE_ASYNC_FAULT);
-			send_sig_fault(SIGSEGV, SEGV_MTEAERR,
-				       (void __user *)NULL, current);
-		}
-
-		if (thread_flags & _TIF_PATCH_PENDING)
-			klp_update_patch_state(current);
 
-		if (thread_flags & (_TIF_SIGPENDING | _TIF_NOTIFY_SIGNAL))
-			do_signal(regs);
-
-		if (thread_flags & _TIF_NOTIFY_RESUME)
-			resume_user_mode_work(regs);
-
-		if (thread_flags & _TIF_FOREIGN_FPSTATE)
-			fpsimd_restore_current_state();
-
-		local_irq_disable();
-		thread_flags = read_thread_flags();
-	} while (thread_flags & _TIF_WORK_MASK);
-}
-
-static __always_inline void exit_to_user_mode_prepare(struct pt_regs *regs)
+static __always_inline void arm64_exit_to_user_mode(struct pt_regs *regs)
 {
-	unsigned long flags;
-
 	local_irq_disable();
-
-	flags = read_thread_flags();
-	if (unlikely(flags & _TIF_WORK_MASK))
-		do_notify_resume(regs, flags);
-
-	local_daif_mask();
-
-	lockdep_sys_exit();
-}
-
-static __always_inline void exit_to_user_mode(struct pt_regs *regs)
-{
 	exit_to_user_mode_prepare(regs);
+	local_daif_mask();
 	mte_check_tfsr_exit();
-	__exit_to_user_mode();
+	exit_to_user_mode();
 }
 
 asmlinkage void noinstr asm_exit_to_user_mode(struct pt_regs *regs)
 {
-	exit_to_user_mode(regs);
-}
-
-/*
- * Handle IRQ/context state management when entering an NMI from user/kernel
- * mode. Before this function is called it is not safe to call regular kernel
- * code, instrumentable code, or any code which may trigger an exception.
- */
-static void noinstr arm64_enter_nmi(struct pt_regs *regs)
-{
-	regs->lockdep_hardirqs = lockdep_hardirqs_enabled();
-
-	__nmi_enter();
-	lockdep_hardirqs_off(CALLER_ADDR0);
-	lockdep_hardirq_enter();
-	ct_nmi_enter();
-
-	trace_hardirqs_off_finish();
-	ftrace_nmi_enter();
-}
-
-/*
- * Handle IRQ/context state management when exiting an NMI from user/kernel
- * mode. After this function returns it is not safe to call regular kernel
- * code, instrumentable code, or any code which may trigger an exception.
- */
-static void noinstr arm64_exit_nmi(struct pt_regs *regs)
-{
-	bool restore = regs->lockdep_hardirqs;
-
-	ftrace_nmi_exit();
-	if (restore) {
-		trace_hardirqs_on_prepare();
-		lockdep_hardirqs_on_prepare();
-	}
-
-	ct_nmi_exit();
-	lockdep_hardirq_exit();
-	if (restore)
-		lockdep_hardirqs_on(CALLER_ADDR0);
-	__nmi_exit();
+	arm64_exit_to_user_mode(regs);
 }
 
 /*
@@ -234,14 +116,18 @@ static void noinstr arm64_exit_nmi(struct pt_regs *regs)
  * kernel mode. Before this function is called it is not safe to call regular
  * kernel code, instrumentable code, or any code which may trigger an exception.
  */
-static void noinstr arm64_enter_el1_dbg(struct pt_regs *regs)
+static noinstr irqentry_state_t arm64_enter_el1_dbg(struct pt_regs *regs)
 {
-	regs->lockdep_hardirqs = lockdep_hardirqs_enabled();
+	irqentry_state_t state;
+
+	state.lockdep = lockdep_hardirqs_enabled();
 
 	lockdep_hardirqs_off(CALLER_ADDR0);
 	ct_nmi_enter();
 
 	trace_hardirqs_off_finish();
+
+	return state;
 }
 
 /*
@@ -249,62 +135,19 @@ static void noinstr arm64_enter_el1_dbg(struct pt_regs *regs)
  * kernel mode. After this function returns it is not safe to call regular
  * kernel code, instrumentable code, or any code which may trigger an exception.
  */
-static void noinstr arm64_exit_el1_dbg(struct pt_regs *regs)
+static void noinstr arm64_exit_el1_dbg(struct pt_regs *regs,
+				       irqentry_state_t state)
 {
-	bool restore = regs->lockdep_hardirqs;
-
-	if (restore) {
+	if (state.lockdep) {
 		trace_hardirqs_on_prepare();
 		lockdep_hardirqs_on_prepare();
 	}
 
 	ct_nmi_exit();
-	if (restore)
+	if (state.lockdep)
 		lockdep_hardirqs_on(CALLER_ADDR0);
 }
 
-#ifdef CONFIG_PREEMPT_DYNAMIC
-DEFINE_STATIC_KEY_TRUE(sk_dynamic_irqentry_exit_cond_resched);
-#define need_irq_preemption() \
-	(static_branch_unlikely(&sk_dynamic_irqentry_exit_cond_resched))
-#else
-#define need_irq_preemption()	(IS_ENABLED(CONFIG_PREEMPTION))
-#endif
-
-static void __sched arm64_preempt_schedule_irq(void)
-{
-	if (!need_irq_preemption())
-		return;
-
-	/*
-	 * Note: thread_info::preempt_count includes both thread_info::count
-	 * and thread_info::need_resched, and is not equivalent to
-	 * preempt_count().
-	 */
-	if (READ_ONCE(current_thread_info()->preempt_count) != 0)
-		return;
-
-	/*
-	 * DAIF.DA are cleared at the start of IRQ/FIQ handling, and when GIC
-	 * priority masking is used the GIC irqchip driver will clear DAIF.IF
-	 * using gic_arch_enable_irqs() for normal IRQs. If anything is set in
-	 * DAIF we must have handled an NMI, so skip preemption.
-	 */
-	if (system_uses_irq_prio_masking() && read_sysreg(daif))
-		return;
-
-	/*
-	 * Preempting a task from an IRQ means we leave copies of PSTATE
-	 * on the stack. cpufeature's enable calls may modify PSTATE, but
-	 * resuming one of these preempted tasks would undo those changes.
-	 *
-	 * Only allow a task to be preempted once cpufeatures have been
-	 * enabled.
-	 */
-	if (system_capabilities_finalized())
-		preempt_schedule_irq();
-}
-
 static void do_interrupt_handler(struct pt_regs *regs,
 				 void (*handler)(struct pt_regs *))
 {
@@ -324,7 +167,7 @@ extern void (*handle_arch_fiq)(struct pt_regs *);
 static void noinstr __panic_unhandled(struct pt_regs *regs, const char *vector,
 				      unsigned long esr)
 {
-	arm64_enter_nmi(regs);
+	irqentry_nmi_enter(regs);
 
 	console_verbose();
 
@@ -475,73 +318,87 @@ UNHANDLED(el1t, 64, error)
 static void noinstr el1_abort(struct pt_regs *regs, unsigned long esr)
 {
 	unsigned long far = read_sysreg(far_el1);
+	irqentry_state_t state;
 
-	enter_from_kernel_mode(regs);
+	state = enter_from_kernel_mode(regs);
 	local_daif_inherit(regs);
 	do_mem_abort(far, esr, regs);
 	local_daif_mask();
-	exit_to_kernel_mode(regs);
+	exit_to_kernel_mode(regs, state);
 }
 
 static void noinstr el1_pc(struct pt_regs *regs, unsigned long esr)
 {
 	unsigned long far = read_sysreg(far_el1);
+	irqentry_state_t state;
 
-	enter_from_kernel_mode(regs);
+	state = enter_from_kernel_mode(regs);
 	local_daif_inherit(regs);
 	do_sp_pc_abort(far, esr, regs);
 	local_daif_mask();
-	exit_to_kernel_mode(regs);
+	exit_to_kernel_mode(regs, state);
 }
 
 static void noinstr el1_undef(struct pt_regs *regs, unsigned long esr)
 {
-	enter_from_kernel_mode(regs);
+	irqentry_state_t state;
+
+	state = enter_from_kernel_mode(regs);
 	local_daif_inherit(regs);
 	do_el1_undef(regs, esr);
 	local_daif_mask();
-	exit_to_kernel_mode(regs);
+	exit_to_kernel_mode(regs, state);
 }
 
 static void noinstr el1_bti(struct pt_regs *regs, unsigned long esr)
 {
-	enter_from_kernel_mode(regs);
+	irqentry_state_t state;
+
+	state = enter_from_kernel_mode(regs);
 	local_daif_inherit(regs);
 	do_el1_bti(regs, esr);
 	local_daif_mask();
-	exit_to_kernel_mode(regs);
+	exit_to_kernel_mode(regs, state);
 }
 
 static void noinstr el1_gcs(struct pt_regs *regs, unsigned long esr)
 {
-	enter_from_kernel_mode(regs);
+	irqentry_state_t state;
+
+	state = enter_from_kernel_mode(regs);
 	local_daif_inherit(regs);
 	do_el1_gcs(regs, esr);
 	local_daif_mask();
-	exit_to_kernel_mode(regs);
+	exit_to_kernel_mode(regs, state);
 }
 
 static void noinstr el1_mops(struct pt_regs *regs, unsigned long esr)
 {
-	enter_from_kernel_mode(regs);
+	irqentry_state_t state;
+
+	state = enter_from_kernel_mode(regs);
 	local_daif_inherit(regs);
 	do_el1_mops(regs, esr);
 	local_daif_mask();
-	exit_to_kernel_mode(regs);
+	exit_to_kernel_mode(regs, state);
 }
 
 static void noinstr el1_breakpt(struct pt_regs *regs, unsigned long esr)
 {
-	arm64_enter_el1_dbg(regs);
+	irqentry_state_t state;
+
+	state = arm64_enter_el1_dbg(regs);
 	debug_exception_enter(regs);
 	do_breakpoint(esr, regs);
 	debug_exception_exit(regs);
-	arm64_exit_el1_dbg(regs);
+	arm64_exit_el1_dbg(regs, state);
 }
 
 static void noinstr el1_softstp(struct pt_regs *regs, unsigned long esr)
 {
-	arm64_enter_el1_dbg(regs);
+	irqentry_state_t state;
+
+	state = arm64_enter_el1_dbg(regs);
 	if (!cortex_a76_erratum_1463225_debug_handler(regs)) {
 		debug_exception_enter(regs);
 		/*
@@ -554,37 +411,42 @@ static void noinstr el1_softstp(struct pt_regs *regs, unsigned long esr)
 			do_el1_softstep(esr, regs);
 		debug_exception_exit(regs);
 	}
-	arm64_exit_el1_dbg(regs);
+	arm64_exit_el1_dbg(regs, state);
 }
 
 static void noinstr el1_watchpt(struct pt_regs *regs, unsigned long esr)
 {
 	/* Watchpoints are the only debug exception to write FAR_EL1 */
 	unsigned long far = read_sysreg(far_el1);
+	irqentry_state_t state;
 
-	arm64_enter_el1_dbg(regs);
+	state = arm64_enter_el1_dbg(regs);
 	debug_exception_enter(regs);
 	do_watchpoint(far, esr, regs);
 	debug_exception_exit(regs);
-	arm64_exit_el1_dbg(regs);
+	arm64_exit_el1_dbg(regs, state);
 }
 
 static void noinstr el1_brk64(struct pt_regs *regs, unsigned long esr)
 {
-	arm64_enter_el1_dbg(regs);
+	irqentry_state_t state;
+
+	state = arm64_enter_el1_dbg(regs);
 	debug_exception_enter(regs);
 	do_el1_brk64(esr, regs);
 	debug_exception_exit(regs);
-	arm64_exit_el1_dbg(regs);
+	arm64_exit_el1_dbg(regs, state);
 }
 
 static void noinstr el1_fpac(struct pt_regs *regs, unsigned long esr)
 {
-	enter_from_kernel_mode(regs);
+	irqentry_state_t state;
+
+	state = enter_from_kernel_mode(regs);
 	local_daif_inherit(regs);
 	do_el1_fpac(regs, esr);
 	local_daif_mask();
-	exit_to_kernel_mode(regs);
+	exit_to_kernel_mode(regs, state);
 }
 
 asmlinkage void noinstr el1h_64_sync_handler(struct pt_regs *regs)
@@ -639,30 +501,32 @@ asmlinkage void noinstr el1h_64_sync_handler(struct pt_regs *regs)
 static __always_inline void __el1_pnmi(struct pt_regs *regs,
 				       void (*handler)(struct pt_regs *))
 {
-	arm64_enter_nmi(regs);
+	irqentry_state_t state;
+
+	state = irqentry_nmi_enter(regs);
 	do_interrupt_handler(regs, handler);
-	arm64_exit_nmi(regs);
+	irqentry_nmi_exit(regs, state);
 }
 
 static __always_inline void __el1_irq(struct pt_regs *regs,
 				      void (*handler)(struct pt_regs *))
 {
-	enter_from_kernel_mode(regs);
+	irqentry_state_t state;
+
+	state = enter_from_kernel_mode(regs);
 
 	irq_enter_rcu();
 	do_interrupt_handler(regs, handler);
 	irq_exit_rcu();
 
-	arm64_preempt_schedule_irq();
-
-	exit_to_kernel_mode(regs);
+	exit_to_kernel_mode(regs, state);
 }
 static void noinstr el1_interrupt(struct pt_regs *regs,
 				  void (*handler)(struct pt_regs *))
 {
 	write_sysreg(DAIF_PROCCTX_NOIRQ, daif);
 
-	if (IS_ENABLED(CONFIG_ARM64_PSEUDO_NMI) && !interrupts_enabled(regs))
+	if (IS_ENABLED(CONFIG_ARM64_PSEUDO_NMI) && regs_irqs_disabled(regs))
 		__el1_pnmi(regs, handler);
 	else
 		__el1_irq(regs, handler);
@@ -681,21 +545,22 @@ asmlinkage void noinstr el1h_64_fiq_handler(struct pt_regs *regs)
 asmlinkage void noinstr el1h_64_error_handler(struct pt_regs *regs)
 {
 	unsigned long esr = read_sysreg(esr_el1);
+	irqentry_state_t state;
 
 	local_daif_restore(DAIF_ERRCTX);
-	arm64_enter_nmi(regs);
+	state = irqentry_nmi_enter(regs);
 	do_serror(regs, esr);
-	arm64_exit_nmi(regs);
+	irqentry_nmi_exit(regs, state);
 }
 
 static void noinstr el0_da(struct pt_regs *regs, unsigned long esr)
 {
 	unsigned long far = read_sysreg(far_el1);
 
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	local_daif_restore(DAIF_PROCCTX);
 	do_mem_abort(far, esr, regs);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 static void noinstr el0_ia(struct pt_regs *regs, unsigned long esr)
@@ -710,50 +575,50 @@ static void noinstr el0_ia(struct pt_regs *regs, unsigned long esr)
 	if (!is_ttbr0_addr(far))
 		arm64_apply_bp_hardening();
 
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	local_daif_restore(DAIF_PROCCTX);
 	do_mem_abort(far, esr, regs);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 static void noinstr el0_fpsimd_acc(struct pt_regs *regs, unsigned long esr)
 {
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	local_daif_restore(DAIF_PROCCTX);
 	do_fpsimd_acc(esr, regs);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 static void noinstr el0_sve_acc(struct pt_regs *regs, unsigned long esr)
 {
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	local_daif_restore(DAIF_PROCCTX);
 	do_sve_acc(esr, regs);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 static void noinstr el0_sme_acc(struct pt_regs *regs, unsigned long esr)
 {
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	local_daif_restore(DAIF_PROCCTX);
 	do_sme_acc(esr, regs);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 static void noinstr el0_fpsimd_exc(struct pt_regs *regs, unsigned long esr)
 {
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	local_daif_restore(DAIF_PROCCTX);
 	do_fpsimd_exc(esr, regs);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 static void noinstr el0_sys(struct pt_regs *regs, unsigned long esr)
 {
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	local_daif_restore(DAIF_PROCCTX);
 	do_el0_sys(esr, regs);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 static void noinstr el0_pc(struct pt_regs *regs, unsigned long esr)
@@ -763,58 +628,58 @@ static void noinstr el0_pc(struct pt_regs *regs, unsigned long esr)
 	if (!is_ttbr0_addr(instruction_pointer(regs)))
 		arm64_apply_bp_hardening();
 
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	local_daif_restore(DAIF_PROCCTX);
 	do_sp_pc_abort(far, esr, regs);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 static void noinstr el0_sp(struct pt_regs *regs, unsigned long esr)
 {
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	local_daif_restore(DAIF_PROCCTX);
 	do_sp_pc_abort(regs->sp, esr, regs);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 static void noinstr el0_undef(struct pt_regs *regs, unsigned long esr)
 {
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	local_daif_restore(DAIF_PROCCTX);
 	do_el0_undef(regs, esr);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 static void noinstr el0_bti(struct pt_regs *regs)
 {
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	local_daif_restore(DAIF_PROCCTX);
 	do_el0_bti(regs);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 static void noinstr el0_mops(struct pt_regs *regs, unsigned long esr)
 {
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	local_daif_restore(DAIF_PROCCTX);
 	do_el0_mops(regs, esr);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 static void noinstr el0_gcs(struct pt_regs *regs, unsigned long esr)
 {
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	local_daif_restore(DAIF_PROCCTX);
 	do_el0_gcs(regs, esr);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 static void noinstr el0_inv(struct pt_regs *regs, unsigned long esr)
 {
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	local_daif_restore(DAIF_PROCCTX);
 	bad_el0_sync(regs, 0, esr);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 static void noinstr el0_breakpt(struct pt_regs *regs, unsigned long esr)
@@ -822,12 +687,12 @@ static void noinstr el0_breakpt(struct pt_regs *regs, unsigned long esr)
 	if (!is_ttbr0_addr(regs->pc))
 		arm64_apply_bp_hardening();
 
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	debug_exception_enter(regs);
 	do_breakpoint(esr, regs);
 	debug_exception_exit(regs);
 	local_daif_restore(DAIF_PROCCTX);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 static void noinstr el0_softstp(struct pt_regs *regs, unsigned long esr)
@@ -835,7 +700,7 @@ static void noinstr el0_softstp(struct pt_regs *regs, unsigned long esr)
 	if (!is_ttbr0_addr(regs->pc))
 		arm64_apply_bp_hardening();
 
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	/*
 	 * After handling a breakpoint, we suspend the breakpoint
 	 * and use single-step to move to the next instruction.
@@ -846,7 +711,7 @@ static void noinstr el0_softstp(struct pt_regs *regs, unsigned long esr)
 		local_daif_restore(DAIF_PROCCTX);
 		do_el0_softstep(esr, regs);
 	}
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 static void noinstr el0_watchpt(struct pt_regs *regs, unsigned long esr)
@@ -854,39 +719,39 @@ static void noinstr el0_watchpt(struct pt_regs *regs, unsigned long esr)
 	/* Watchpoints are the only debug exception to write FAR_EL1 */
 	unsigned long far = read_sysreg(far_el1);
 
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	debug_exception_enter(regs);
 	do_watchpoint(far, esr, regs);
 	debug_exception_exit(regs);
 	local_daif_restore(DAIF_PROCCTX);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 static void noinstr el0_brk64(struct pt_regs *regs, unsigned long esr)
 {
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	local_daif_restore(DAIF_PROCCTX);
 	do_el0_brk64(esr, regs);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 static void noinstr el0_svc(struct pt_regs *regs)
 {
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	cortex_a76_erratum_1463225_svc_handler();
 	fpsimd_syscall_enter();
 	local_daif_restore(DAIF_PROCCTX);
 	do_el0_svc(regs);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 	fpsimd_syscall_exit();
 }
 
 static void noinstr el0_fpac(struct pt_regs *regs, unsigned long esr)
 {
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	local_daif_restore(DAIF_PROCCTX);
 	do_el0_fpac(regs, esr);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 asmlinkage void noinstr el0t_64_sync_handler(struct pt_regs *regs)
@@ -960,7 +825,7 @@ asmlinkage void noinstr el0t_64_sync_handler(struct pt_regs *regs)
 static void noinstr el0_interrupt(struct pt_regs *regs,
 				  void (*handler)(struct pt_regs *))
 {
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 
 	write_sysreg(DAIF_PROCCTX_NOIRQ, daif);
 
@@ -971,7 +836,7 @@ static void noinstr el0_interrupt(struct pt_regs *regs,
 	do_interrupt_handler(regs, handler);
 	irq_exit_rcu();
 
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 static void noinstr __el0_irq_handler_common(struct pt_regs *regs)
@@ -997,14 +862,15 @@ asmlinkage void noinstr el0t_64_fiq_handler(struct pt_regs *regs)
 static void noinstr __el0_error_handler_common(struct pt_regs *regs)
 {
 	unsigned long esr = read_sysreg(esr_el1);
+	irqentry_state_t state;
 
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	local_daif_restore(DAIF_ERRCTX);
-	arm64_enter_nmi(regs);
+	state = irqentry_nmi_enter(regs);
 	do_serror(regs, esr);
-	arm64_exit_nmi(regs);
+	irqentry_nmi_exit(regs, state);
 	local_daif_restore(DAIF_PROCCTX);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 asmlinkage void noinstr el0t_64_error_handler(struct pt_regs *regs)
@@ -1015,27 +881,27 @@ asmlinkage void noinstr el0t_64_error_handler(struct pt_regs *regs)
 #ifdef CONFIG_COMPAT
 static void noinstr el0_cp15(struct pt_regs *regs, unsigned long esr)
 {
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	local_daif_restore(DAIF_PROCCTX);
 	do_el0_cp15(esr, regs);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 static void noinstr el0_svc_compat(struct pt_regs *regs)
 {
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	cortex_a76_erratum_1463225_svc_handler();
 	local_daif_restore(DAIF_PROCCTX);
 	do_el0_svc_compat(regs);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 static void noinstr el0_bkpt32(struct pt_regs *regs, unsigned long esr)
 {
-	enter_from_user_mode(regs);
+	arm64_enter_from_user_mode(regs);
 	local_daif_restore(DAIF_PROCCTX);
 	do_bkpt32(esr, regs);
-	exit_to_user_mode(regs);
+	arm64_exit_to_user_mode(regs);
 }
 
 asmlinkage void noinstr el0t_32_sync_handler(struct pt_regs *regs)
@@ -1114,7 +980,7 @@ asmlinkage void noinstr __noreturn handle_bad_stack(struct pt_regs *regs)
 	unsigned long esr = read_sysreg(esr_el1);
 	unsigned long far = read_sysreg(far_el1);
 
-	arm64_enter_nmi(regs);
+	irqentry_nmi_enter(regs);
 	panic_bad_stack(regs, esr, far);
 }
 
@@ -1122,6 +988,7 @@ asmlinkage void noinstr __noreturn handle_bad_stack(struct pt_regs *regs)
 asmlinkage noinstr unsigned long
 __sdei_handler(struct pt_regs *regs, struct sdei_registered_event *arg)
 {
+	irqentry_state_t state;
 	unsigned long ret;
 
 	/*
@@ -1146,9 +1013,9 @@ __sdei_handler(struct pt_regs *regs, struct sdei_registered_event *arg)
 	else if (cpu_has_pan())
 		set_pstate_pan(0);
 
-	arm64_enter_nmi(regs);
+	state = irqentry_nmi_enter(regs);
 	ret = do_sdei_event(regs, arg);
-	arm64_exit_nmi(regs);
+	irqentry_nmi_exit(regs, state);
 
 	return ret;
 }
diff --git a/arch/arm64/kernel/fpsimd.c b/arch/arm64/kernel/fpsimd.c
index c37f02d7194e..e3f8f51748bc 100644
--- a/arch/arm64/kernel/fpsimd.c
+++ b/arch/arm64/kernel/fpsimd.c
@@ -1265,6 +1265,8 @@ void __init sme_setup(void)
 	if (!system_supports_sme())
 		return;
 
+	min_bit = find_last_bit(info->vq_map, SVE_VQ_MAX);
+
 	/*
 	 * SME doesn't require any particular vector length be
 	 * supported but it does require at least one.  We should have
@@ -1272,9 +1274,8 @@ void __init sme_setup(void)
 	 * let's double check here.  The bitmap is SVE_VQ_MAP sized for
 	 * sharing with SVE.
 	 */
-	WARN_ON(bitmap_empty(info->vq_map, SVE_VQ_MAX));
+	WARN_ON(min_bit >= SVE_VQ_MAX);
 
-	min_bit = find_last_bit(info->vq_map, SVE_VQ_MAX);
 	info->min_vl = sve_vl_from_vq(__bit_to_vq(min_bit));
 
 	max_bit = find_first_bit(info->vq_map, SVE_VQ_MAX);
diff --git a/arch/arm64/kernel/ftrace.c b/arch/arm64/kernel/ftrace.c
index 5a890714ee2e..5adad37ab4fa 100644
--- a/arch/arm64/kernel/ftrace.c
+++ b/arch/arm64/kernel/ftrace.c
@@ -258,10 +258,17 @@ int ftrace_update_ftrace_func(ftrace_func_t func)
 	return ftrace_modify_code(pc, 0, new, false);
 }
 
-static struct plt_entry *get_ftrace_plt(struct module *mod)
+static struct plt_entry *get_ftrace_plt(struct module *mod, unsigned long addr)
 {
 #ifdef CONFIG_MODULES
-	struct plt_entry *plt = mod->arch.ftrace_trampolines;
+	struct plt_entry *plt = NULL;
+
+	if (within_module_mem_type(addr, mod, MOD_INIT_TEXT))
+		plt = mod->arch.init_ftrace_trampolines;
+	else if (within_module_mem_type(addr, mod, MOD_TEXT))
+		plt = mod->arch.ftrace_trampolines;
+	else
+		return NULL;
 
 	return &plt[FTRACE_PLT_IDX];
 #else
@@ -332,7 +339,7 @@ static bool ftrace_find_callable_addr(struct dyn_ftrace *rec,
 	if (WARN_ON(!mod))
 		return false;
 
-	plt = get_ftrace_plt(mod);
+	plt = get_ftrace_plt(mod, pc);
 	if (!plt) {
 		pr_err("ftrace: no module PLT for %ps\n", (void *)*addr);
 		return false;
diff --git a/arch/arm64/kernel/machine_kexec_file.c b/arch/arm64/kernel/machine_kexec_file.c
index af1ca875c52c..410060ebd86d 100644
--- a/arch/arm64/kernel/machine_kexec_file.c
+++ b/arch/arm64/kernel/machine_kexec_file.c
@@ -94,7 +94,7 @@ int load_other_segments(struct kimage *image,
 			char *initrd, unsigned long initrd_len,
 			char *cmdline)
 {
-	struct kexec_buf kbuf;
+	struct kexec_buf kbuf = {};
 	void *dtb = NULL;
 	unsigned long initrd_load_addr = 0, dtb_len,
 		      orig_segments = image->nr_segments;
diff --git a/arch/arm64/kernel/module-plts.c b/arch/arm64/kernel/module-plts.c
index bde32979c06a..7afd370da9f4 100644
--- a/arch/arm64/kernel/module-plts.c
+++ b/arch/arm64/kernel/module-plts.c
@@ -283,7 +283,7 @@ int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
 	unsigned long core_plts = 0;
 	unsigned long init_plts = 0;
 	Elf64_Sym *syms = NULL;
-	Elf_Shdr *pltsec, *tramp = NULL;
+	Elf_Shdr *pltsec, *tramp = NULL, *init_tramp = NULL;
 	int i;
 
 	/*
@@ -298,6 +298,9 @@ int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
 		else if (!strcmp(secstrings + sechdrs[i].sh_name,
 				 ".text.ftrace_trampoline"))
 			tramp = sechdrs + i;
+		else if (!strcmp(secstrings + sechdrs[i].sh_name,
+				 ".init.text.ftrace_trampoline"))
+			init_tramp = sechdrs + i;
 		else if (sechdrs[i].sh_type == SHT_SYMTAB)
 			syms = (Elf64_Sym *)sechdrs[i].sh_addr;
 	}
@@ -363,5 +366,12 @@ int module_frob_arch_sections(Elf_Ehdr *ehdr, Elf_Shdr *sechdrs,
 		tramp->sh_size = NR_FTRACE_PLTS * sizeof(struct plt_entry);
 	}
 
+	if (init_tramp) {
+		init_tramp->sh_type = SHT_NOBITS;
+		init_tramp->sh_flags = SHF_EXECINSTR | SHF_ALLOC;
+		init_tramp->sh_addralign = __alignof__(struct plt_entry);
+		init_tramp->sh_size = NR_FTRACE_PLTS * sizeof(struct plt_entry);
+	}
+
 	return 0;
 }
diff --git a/arch/arm64/kernel/module.c b/arch/arm64/kernel/module.c
index 40148d2725ce..d6d443c4a01a 100644
--- a/arch/arm64/kernel/module.c
+++ b/arch/arm64/kernel/module.c
@@ -466,6 +466,17 @@ static int module_init_ftrace_plt(const Elf_Ehdr *hdr,
 	__init_plt(&plts[FTRACE_PLT_IDX], FTRACE_ADDR);
 
 	mod->arch.ftrace_trampolines = plts;
+
+	s = find_section(hdr, sechdrs, ".init.text.ftrace_trampoline");
+	if (!s)
+		return -ENOEXEC;
+
+	plts = (void *)s->sh_addr;
+
+	__init_plt(&plts[FTRACE_PLT_IDX], FTRACE_ADDR);
+
+	mod->arch.init_ftrace_trampolines = plts;
+
 #endif
 	return 0;
 }
diff --git a/arch/arm64/kernel/pi/map_kernel.c b/arch/arm64/kernel/pi/map_kernel.c
index 0f4bd7771859..e8ddbde31a83 100644
--- a/arch/arm64/kernel/pi/map_kernel.c
+++ b/arch/arm64/kernel/pi/map_kernel.c
@@ -18,9 +18,9 @@
 
 extern const u8 __eh_frame_start[], __eh_frame_end[];
 
-extern void idmap_cpu_replace_ttbr1(void *pgdir);
+extern void idmap_cpu_replace_ttbr1(phys_addr_t pgdir);
 
-static void __init map_segment(pgd_t *pg_dir, u64 *pgd, u64 va_offset,
+static void __init map_segment(pgd_t *pg_dir, phys_addr_t *pgd, u64 va_offset,
 			       void *start, void *end, pgprot_t prot,
 			       bool may_use_cont, int root_level)
 {
@@ -40,7 +40,7 @@ static void __init map_kernel(u64 kaslr_offset, u64 va_offset, int root_level)
 {
 	bool enable_scs = IS_ENABLED(CONFIG_UNWIND_PATCH_PAC_INTO_SCS);
 	bool twopass = IS_ENABLED(CONFIG_RELOCATABLE);
-	u64 pgdp = (u64)init_pg_dir + PAGE_SIZE;
+	phys_addr_t pgdp = (phys_addr_t)init_pg_dir + PAGE_SIZE;
 	pgprot_t text_prot = PAGE_KERNEL_ROX;
 	pgprot_t data_prot = PAGE_KERNEL;
 	pgprot_t prot;
@@ -78,6 +78,12 @@ static void __init map_kernel(u64 kaslr_offset, u64 va_offset, int root_level)
 	twopass |= enable_scs;
 	prot = twopass ? data_prot : text_prot;
 
+	/*
+	 * [_stext, _text) isn't executed after boot and contains some
+	 * non-executable, unpredictable data, so map it non-executable.
+	 */
+	map_segment(init_pg_dir, &pgdp, va_offset, _text, _stext, data_prot,
+		    false, root_level);
 	map_segment(init_pg_dir, &pgdp, va_offset, _stext, _etext, prot,
 		    !twopass, root_level);
 	map_segment(init_pg_dir, &pgdp, va_offset, __start_rodata,
@@ -90,7 +96,7 @@ static void __init map_kernel(u64 kaslr_offset, u64 va_offset, int root_level)
 		    true, root_level);
 	dsb(ishst);
 
-	idmap_cpu_replace_ttbr1(init_pg_dir);
+	idmap_cpu_replace_ttbr1((phys_addr_t)init_pg_dir);
 
 	if (twopass) {
 		if (IS_ENABLED(CONFIG_RELOCATABLE))
@@ -129,10 +135,10 @@ static void __init map_kernel(u64 kaslr_offset, u64 va_offset, int root_level)
 	/* Copy the root page table to its final location */
 	memcpy((void *)swapper_pg_dir + va_offset, init_pg_dir, PAGE_SIZE);
 	dsb(ishst);
-	idmap_cpu_replace_ttbr1(swapper_pg_dir);
+	idmap_cpu_replace_ttbr1((phys_addr_t)swapper_pg_dir);
 }
 
-static void noinline __section(".idmap.text") set_ttbr0_for_lpa2(u64 ttbr)
+static void noinline __section(".idmap.text") set_ttbr0_for_lpa2(phys_addr_t ttbr)
 {
 	u64 sctlr = read_sysreg(sctlr_el1);
 	u64 tcr = read_sysreg(tcr_el1) | TCR_DS;
@@ -172,30 +178,30 @@ static void __init remap_idmap_for_lpa2(void)
 	 */
 	create_init_idmap(init_pg_dir, mask);
 	dsb(ishst);
-	set_ttbr0_for_lpa2((u64)init_pg_dir);
+	set_ttbr0_for_lpa2((phys_addr_t)init_pg_dir);
 
 	/*
 	 * Recreate the initial ID map with the same granularity as before.
 	 * Don't bother with the FDT, we no longer need it after this.
 	 */
 	memset(init_idmap_pg_dir, 0,
-	       (u64)init_idmap_pg_end - (u64)init_idmap_pg_dir);
+	       (char *)init_idmap_pg_end - (char *)init_idmap_pg_dir);
 
 	create_init_idmap(init_idmap_pg_dir, mask);
 	dsb(ishst);
 
 	/* switch back to the updated initial ID map */
-	set_ttbr0_for_lpa2((u64)init_idmap_pg_dir);
+	set_ttbr0_for_lpa2((phys_addr_t)init_idmap_pg_dir);
 
 	/* wipe the temporary ID map from memory */
-	memset(init_pg_dir, 0, (u64)init_pg_end - (u64)init_pg_dir);
+	memset(init_pg_dir, 0, (char *)init_pg_end - (char *)init_pg_dir);
 }
 
-static void __init map_fdt(u64 fdt)
+static void *__init map_fdt(phys_addr_t fdt)
 {
 	static u8 ptes[INIT_IDMAP_FDT_SIZE] __initdata __aligned(PAGE_SIZE);
-	u64 efdt = fdt + MAX_FDT_SIZE;
-	u64 ptep = (u64)ptes;
+	phys_addr_t efdt = fdt + MAX_FDT_SIZE;
+	phys_addr_t ptep = (phys_addr_t)ptes; /* We're idmapped when called */
 
 	/*
 	 * Map up to MAX_FDT_SIZE bytes, but avoid overlap with
@@ -205,6 +211,8 @@ static void __init map_fdt(u64 fdt)
 		  fdt, PAGE_KERNEL, IDMAP_ROOT_LEVEL,
 		  (pte_t *)init_idmap_pg_dir, false, 0);
 	dsb(ishst);
+
+	return (void *)fdt;
 }
 
 /*
@@ -230,7 +238,7 @@ static bool __init ng_mappings_allowed(void)
 	return true;
 }
 
-asmlinkage void __init early_map_kernel(u64 boot_status, void *fdt)
+asmlinkage void __init early_map_kernel(u64 boot_status, phys_addr_t fdt)
 {
 	static char const chosen_str[] __initconst = "/chosen";
 	u64 va_base, pa_base = (u64)&_text;
@@ -238,15 +246,14 @@ asmlinkage void __init early_map_kernel(u64 boot_status, void *fdt)
 	int root_level = 4 - CONFIG_PGTABLE_LEVELS;
 	int va_bits = VA_BITS;
 	int chosen;
-
-	map_fdt((u64)fdt);
+	void *fdt_mapped = map_fdt(fdt);
 
 	/* Clear BSS and the initial page tables */
-	memset(__bss_start, 0, (u64)init_pg_end - (u64)__bss_start);
+	memset(__bss_start, 0, (char *)init_pg_end - (char *)__bss_start);
 
 	/* Parse the command line for CPU feature overrides */
-	chosen = fdt_path_offset(fdt, chosen_str);
-	init_feature_override(boot_status, fdt, chosen);
+	chosen = fdt_path_offset(fdt_mapped, chosen_str);
+	init_feature_override(boot_status, fdt_mapped, chosen);
 
 	if (IS_ENABLED(CONFIG_ARM64_64K_PAGES) && !cpu_has_lva()) {
 		va_bits = VA_BITS_MIN;
@@ -266,7 +273,7 @@ asmlinkage void __init early_map_kernel(u64 boot_status, void *fdt)
 	 * fill in the high bits from the seed.
 	 */
 	if (IS_ENABLED(CONFIG_RANDOMIZE_BASE)) {
-		u64 kaslr_seed = kaslr_early_init(fdt, chosen);
+		u64 kaslr_seed = kaslr_early_init(fdt_mapped, chosen);
 
 		if (kaslr_seed && kaslr_requires_kpti())
 			arm64_use_ng_mappings = ng_mappings_allowed();
diff --git a/arch/arm64/kernel/pi/map_range.c b/arch/arm64/kernel/pi/map_range.c
index 7982788e7b9a..de52cd85c691 100644
--- a/arch/arm64/kernel/pi/map_range.c
+++ b/arch/arm64/kernel/pi/map_range.c
@@ -26,8 +26,9 @@
  * @va_offset:		Offset between a physical page and its current mapping
  * 			in the VA space
  */
-void __init map_range(u64 *pte, u64 start, u64 end, u64 pa, pgprot_t prot,
-		      int level, pte_t *tbl, bool may_use_cont, u64 va_offset)
+void __init map_range(phys_addr_t *pte, u64 start, u64 end, phys_addr_t pa,
+		      pgprot_t prot, int level, pte_t *tbl, bool may_use_cont,
+		      u64 va_offset)
 {
 	u64 cmask = (level == 3) ? CONT_PTE_SIZE - 1 : U64_MAX;
 	ptdesc_t protval = pgprot_val(prot) & ~PTE_TYPE_MASK;
@@ -87,19 +88,22 @@ void __init map_range(u64 *pte, u64 start, u64 end, u64 pa, pgprot_t prot,
 	}
 }
 
-asmlinkage u64 __init create_init_idmap(pgd_t *pg_dir, ptdesc_t clrmask)
+asmlinkage phys_addr_t __init create_init_idmap(pgd_t *pg_dir, ptdesc_t clrmask)
 {
-	u64 ptep = (u64)pg_dir + PAGE_SIZE;
+	phys_addr_t ptep = (phys_addr_t)pg_dir + PAGE_SIZE; /* MMU is off */
 	pgprot_t text_prot = PAGE_KERNEL_ROX;
 	pgprot_t data_prot = PAGE_KERNEL;
 
 	pgprot_val(text_prot) &= ~clrmask;
 	pgprot_val(data_prot) &= ~clrmask;
 
-	map_range(&ptep, (u64)_stext, (u64)__initdata_begin, (u64)_stext,
-		  text_prot, IDMAP_ROOT_LEVEL, (pte_t *)pg_dir, false, 0);
-	map_range(&ptep, (u64)__initdata_begin, (u64)_end, (u64)__initdata_begin,
-		  data_prot, IDMAP_ROOT_LEVEL, (pte_t *)pg_dir, false, 0);
+	/* MMU is off; pointer casts to phys_addr_t are safe */
+	map_range(&ptep, (u64)_stext, (u64)__initdata_begin,
+		  (phys_addr_t)_stext, text_prot, IDMAP_ROOT_LEVEL,
+		  (pte_t *)pg_dir, false, 0);
+	map_range(&ptep, (u64)__initdata_begin, (u64)_end,
+		  (phys_addr_t)__initdata_begin, data_prot, IDMAP_ROOT_LEVEL,
+		  (pte_t *)pg_dir, false, 0);
 
 	return ptep;
 }
diff --git a/arch/arm64/kernel/pi/pi.h b/arch/arm64/kernel/pi/pi.h
index 46cafee7829f..08ef9f80456b 100644
--- a/arch/arm64/kernel/pi/pi.h
+++ b/arch/arm64/kernel/pi/pi.h
@@ -29,9 +29,10 @@ u64 kaslr_early_init(void *fdt, int chosen);
 void relocate_kernel(u64 offset);
 int scs_patch(const u8 eh_frame[], int size);
 
-void map_range(u64 *pgd, u64 start, u64 end, u64 pa, pgprot_t prot,
-	       int level, pte_t *tbl, bool may_use_cont, u64 va_offset);
+void map_range(phys_addr_t *pte, u64 start, u64 end, phys_addr_t pa,
+	       pgprot_t prot, int level, pte_t *tbl, bool may_use_cont,
+	       u64 va_offset);
 
-asmlinkage void early_map_kernel(u64 boot_status, void *fdt);
+asmlinkage void early_map_kernel(u64 boot_status, phys_addr_t fdt);
 
-asmlinkage u64 create_init_idmap(pgd_t *pgd, ptdesc_t clrmask);
+asmlinkage phys_addr_t create_init_idmap(pgd_t *pgd, ptdesc_t clrmask);
diff --git a/arch/arm64/kernel/probes/decode-insn.c b/arch/arm64/kernel/probes/decode-insn.c
index 6438bf62e753..4137cc5ef031 100644
--- a/arch/arm64/kernel/probes/decode-insn.c
+++ b/arch/arm64/kernel/probes/decode-insn.c
@@ -108,9 +108,10 @@ arm_probe_decode_insn(u32 insn, struct arch_probe_insn *api)
 	    aarch64_insn_is_bl(insn)) {
 		api->handler = simulate_b_bl;
 	} else if (aarch64_insn_is_br(insn) ||
-	    aarch64_insn_is_blr(insn) ||
-	    aarch64_insn_is_ret(insn)) {
-		api->handler = simulate_br_blr_ret;
+		aarch64_insn_is_blr(insn)) {
+		api->handler = simulate_br_blr;
+	} else if (aarch64_insn_is_ret(insn)) {
+		api->handler = simulate_ret;
 	} else {
 		/*
 		 * Instruction cannot be stepped out-of-line and we don't
diff --git a/arch/arm64/kernel/probes/simulate-insn.c b/arch/arm64/kernel/probes/simulate-insn.c
index 4c6d2d712fbd..89fbeb32107e 100644
--- a/arch/arm64/kernel/probes/simulate-insn.c
+++ b/arch/arm64/kernel/probes/simulate-insn.c
@@ -13,6 +13,7 @@
 #include <asm/traps.h>
 
 #include "simulate-insn.h"
+#include "asm/gcs.h"
 
 #define bbl_displacement(insn)		\
 	sign_extend32(((insn) & 0x3ffffff) << 2, 27)
@@ -49,6 +50,21 @@ static inline u32 get_w_reg(struct pt_regs *regs, int reg)
 	return lower_32_bits(pt_regs_read_reg(regs, reg));
 }
 
+static inline int update_lr(struct pt_regs *regs, long addr)
+{
+	int err = 0;
+
+	if (user_mode(regs) && task_gcs_el0_enabled(current)) {
+		push_user_gcs(addr, &err);
+		if (err) {
+			force_sig(SIGSEGV);
+			return err;
+		}
+	}
+	procedure_link_pointer_set(regs, addr);
+	return err;
+}
+
 static bool __kprobes check_cbz(u32 opcode, struct pt_regs *regs)
 {
 	int xn = opcode & 0x1f;
@@ -107,9 +123,9 @@ simulate_b_bl(u32 opcode, long addr, struct pt_regs *regs)
 {
 	int disp = bbl_displacement(opcode);
 
-	/* Link register is x30 */
 	if (opcode & (1 << 31))
-		set_x_reg(regs, 30, addr + 4);
+		if (update_lr(regs, addr + 4))
+			return;
 
 	instruction_pointer_set(regs, addr + disp);
 }
@@ -126,16 +142,34 @@ simulate_b_cond(u32 opcode, long addr, struct pt_regs *regs)
 }
 
 void __kprobes
-simulate_br_blr_ret(u32 opcode, long addr, struct pt_regs *regs)
+simulate_br_blr(u32 opcode, long addr, struct pt_regs *regs)
 {
 	int xn = (opcode >> 5) & 0x1f;
+	u64 b_target = get_x_reg(regs, xn);
 
-	/* update pc first in case we're doing a "blr lr" */
-	instruction_pointer_set(regs, get_x_reg(regs, xn));
-
-	/* Link register is x30 */
 	if (((opcode >> 21) & 0x3) == 1)
-		set_x_reg(regs, 30, addr + 4);
+		if (update_lr(regs, addr + 4))
+			return;
+
+	instruction_pointer_set(regs, b_target);
+}
+
+void __kprobes
+simulate_ret(u32 opcode, long addr, struct pt_regs *regs)
+{
+	u64 ret_addr;
+	int err = 0;
+	int xn = (opcode >> 5) & 0x1f;
+	u64 r_target = get_x_reg(regs, xn);
+
+	if (user_mode(regs) && task_gcs_el0_enabled(current)) {
+		ret_addr = pop_user_gcs(&err);
+		if (err || ret_addr != r_target) {
+			force_sig(SIGSEGV);
+			return;
+		}
+	}
+	instruction_pointer_set(regs, r_target);
 }
 
 void __kprobes
diff --git a/arch/arm64/kernel/probes/simulate-insn.h b/arch/arm64/kernel/probes/simulate-insn.h
index efb2803ec943..9e772a292d56 100644
--- a/arch/arm64/kernel/probes/simulate-insn.h
+++ b/arch/arm64/kernel/probes/simulate-insn.h
@@ -11,7 +11,8 @@
 void simulate_adr_adrp(u32 opcode, long addr, struct pt_regs *regs);
 void simulate_b_bl(u32 opcode, long addr, struct pt_regs *regs);
 void simulate_b_cond(u32 opcode, long addr, struct pt_regs *regs);
-void simulate_br_blr_ret(u32 opcode, long addr, struct pt_regs *regs);
+void simulate_br_blr(u32 opcode, long addr, struct pt_regs *regs);
+void simulate_ret(u32 opcode, long addr, struct pt_regs *regs);
 void simulate_cbz_cbnz(u32 opcode, long addr, struct pt_regs *regs);
 void simulate_tbz_tbnz(u32 opcode, long addr, struct pt_regs *regs);
 void simulate_ldr_literal(u32 opcode, long addr, struct pt_regs *regs);
diff --git a/arch/arm64/kernel/probes/uprobes.c b/arch/arm64/kernel/probes/uprobes.c
index 1f91fd2a8187..2799bdb2fb82 100644
--- a/arch/arm64/kernel/probes/uprobes.c
+++ b/arch/arm64/kernel/probes/uprobes.c
@@ -6,6 +6,7 @@
 #include <linux/ptrace.h>
 #include <linux/uprobes.h>
 #include <asm/cacheflush.h>
+#include <asm/gcs.h>
 
 #include "decode-insn.h"
 
@@ -159,11 +160,43 @@ arch_uretprobe_hijack_return_addr(unsigned long trampoline_vaddr,
 				  struct pt_regs *regs)
 {
 	unsigned long orig_ret_vaddr;
+	unsigned long gcs_ret_vaddr;
+	int err = 0;
+	u64 gcspr;
 
 	orig_ret_vaddr = procedure_link_pointer(regs);
+
+	if (task_gcs_el0_enabled(current)) {
+		gcspr = read_sysreg_s(SYS_GCSPR_EL0);
+		gcs_ret_vaddr = get_user_gcs((__force unsigned long __user *)gcspr, &err);
+		if (err) {
+			force_sig(SIGSEGV);
+			goto out;
+		}
+
+		/*
+		 * If the LR and GCS return addr don't match, then some kind of PAC
+		 * signing or control flow occurred since entering the probed function.
+		 * Likely because the user is attempting to retprobe on an instruction
+		 * that isn't a function boundary or inside a leaf function. Explicitly
+		 * abort this retprobe because it will generate a GCS exception.
+		 */
+		if (gcs_ret_vaddr != orig_ret_vaddr) {
+			orig_ret_vaddr = -1;
+			goto out;
+		}
+
+		put_user_gcs(trampoline_vaddr, (__force unsigned long __user *)gcspr, &err);
+		if (err) {
+			force_sig(SIGSEGV);
+			goto out;
+		}
+	}
+
 	/* Replace the return addr with trampoline addr */
 	procedure_link_pointer_set(regs, trampoline_vaddr);
 
+out:
 	return orig_ret_vaddr;
 }
 
diff --git a/arch/arm64/kernel/process.c b/arch/arm64/kernel/process.c
index 96482a1412c6..fba7ca102a8c 100644
--- a/arch/arm64/kernel/process.c
+++ b/arch/arm64/kernel/process.c
@@ -409,7 +409,7 @@ asmlinkage void ret_from_fork(void) asm("ret_from_fork");
 
 int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
-	unsigned long clone_flags = args->flags;
+	u64 clone_flags = args->flags;
 	unsigned long stack_start = args->stack;
 	unsigned long tls = args->tls;
 	struct pt_regs *childregs = task_pt_regs(p);
diff --git a/arch/arm64/kernel/proton-pack.c b/arch/arm64/kernel/proton-pack.c
index edf1783ffc81..f9a32dfde006 100644
--- a/arch/arm64/kernel/proton-pack.c
+++ b/arch/arm64/kernel/proton-pack.c
@@ -884,6 +884,7 @@ static u8 spectre_bhb_loop_affected(void)
 	static const struct midr_range spectre_bhb_k38_list[] = {
 		MIDR_ALL_VERSIONS(MIDR_CORTEX_A715),
 		MIDR_ALL_VERSIONS(MIDR_CORTEX_A720),
+		MIDR_ALL_VERSIONS(MIDR_CORTEX_A720AE),
 		{},
 	};
 	static const struct midr_range spectre_bhb_k32_list[] = {
diff --git a/arch/arm64/kernel/rsi.c b/arch/arm64/kernel/rsi.c
index ce4778141ec7..c64a06f58c0b 100644
--- a/arch/arm64/kernel/rsi.c
+++ b/arch/arm64/kernel/rsi.c
@@ -84,7 +84,25 @@ static void __init arm64_rsi_setup_memory(void)
 	}
 }
 
-bool __arm64_is_protected_mmio(phys_addr_t base, size_t size)
+/*
+ * Check if a given PA range is Trusted (e.g., Protected memory, a Trusted Device
+ * mapping, or an MMIO emulated in the Realm world).
+ *
+ * We can rely on the RIPAS value of the region to detect if a given region is
+ * protected.
+ *
+ *  RIPAS_DEV - A trusted device memory or a trusted emulated MMIO (in the Realm
+ *		world
+ *  RIPAS_RAM - Memory (RAM), protected by the RMM guarantees. (e.g., Firmware
+ *		reserved regions for data sharing).
+ *
+ *  RIPAS_DESTROYED is a special case of one of the above, where the host did
+ *  something without our permission and as such we can't do anything about it.
+ *
+ * The only case where something is emulated by the untrusted hypervisor or is
+ * backed by shared memory is indicated by RSI_RIPAS_EMPTY.
+ */
+bool arm64_rsi_is_protected(phys_addr_t base, size_t size)
 {
 	enum ripas ripas;
 	phys_addr_t end, top;
@@ -101,18 +119,18 @@ bool __arm64_is_protected_mmio(phys_addr_t base, size_t size)
 			break;
 		if (WARN_ON(top <= base))
 			break;
-		if (ripas != RSI_RIPAS_DEV)
+		if (ripas == RSI_RIPAS_EMPTY)
 			break;
 		base = top;
 	}
 
 	return base >= end;
 }
-EXPORT_SYMBOL(__arm64_is_protected_mmio);
+EXPORT_SYMBOL(arm64_rsi_is_protected);
 
 static int realm_ioremap_hook(phys_addr_t phys, size_t size, pgprot_t *prot)
 {
-	if (__arm64_is_protected_mmio(phys, size))
+	if (arm64_rsi_is_protected(phys, size))
 		*prot = pgprot_encrypted(*prot);
 	else
 		*prot = pgprot_decrypted(*prot);
diff --git a/arch/arm64/kernel/sdei.c b/arch/arm64/kernel/sdei.c
index 6f24a0251e18..95169f7b6531 100644
--- a/arch/arm64/kernel/sdei.c
+++ b/arch/arm64/kernel/sdei.c
@@ -243,7 +243,7 @@ unsigned long __kprobes do_sdei_event(struct pt_regs *regs,
 	 * If we interrupted the kernel with interrupts masked, we always go
 	 * back to wherever we came from.
 	 */
-	if (mode == kernel_mode && !interrupts_enabled(regs))
+	if (mode == kernel_mode && regs_irqs_disabled(regs))
 		return SDEI_EV_HANDLED;
 
 	/*
diff --git a/arch/arm64/kernel/setup.c b/arch/arm64/kernel/setup.c
index 77c7926a4df6..23c05dc7a8f2 100644
--- a/arch/arm64/kernel/setup.c
+++ b/arch/arm64/kernel/setup.c
@@ -214,7 +214,7 @@ static void __init request_standard_resources(void)
 	unsigned long i = 0;
 	size_t res_size;
 
-	kernel_code.start   = __pa_symbol(_stext);
+	kernel_code.start   = __pa_symbol(_text);
 	kernel_code.end     = __pa_symbol(__init_begin - 1);
 	kernel_data.start   = __pa_symbol(_sdata);
 	kernel_data.end     = __pa_symbol(_end - 1);
@@ -280,7 +280,7 @@ u64 cpu_logical_map(unsigned int cpu)
 
 void __init __no_sanitize_address setup_arch(char **cmdline_p)
 {
-	setup_initial_init_mm(_stext, _etext, _edata, _end);
+	setup_initial_init_mm(_text, _etext, _edata, _end);
 
 	*cmdline_p = boot_command_line;
 
diff --git a/arch/arm64/kernel/signal.c b/arch/arm64/kernel/signal.c
index db3f972f8cd9..1110eeb21f57 100644
--- a/arch/arm64/kernel/signal.c
+++ b/arch/arm64/kernel/signal.c
@@ -9,6 +9,7 @@
 #include <linux/cache.h>
 #include <linux/compat.h>
 #include <linux/errno.h>
+#include <linux/irq-entry-common.h>
 #include <linux/kernel.h>
 #include <linux/signal.h>
 #include <linux/freezer.h>
@@ -1576,7 +1577,7 @@ static void handle_signal(struct ksignal *ksig, struct pt_regs *regs)
  * the kernel can handle, and then we build all the user-level signal handling
  * stack-frames in one go after that.
  */
-void do_signal(struct pt_regs *regs)
+void arch_do_signal_or_restart(struct pt_regs *regs)
 {
 	unsigned long continue_addr = 0, restart_addr = 0;
 	int retval = 0;
diff --git a/arch/arm64/kernel/syscall.c b/arch/arm64/kernel/syscall.c
index c442fcec6b9e..aba7ca6bca2d 100644
--- a/arch/arm64/kernel/syscall.c
+++ b/arch/arm64/kernel/syscall.c
@@ -43,7 +43,7 @@ static void invoke_syscall(struct pt_regs *regs, unsigned int scno,
 
 	add_random_kstack_offset();
 
-	if (scno < sc_nr) {
+	if (likely(scno < sc_nr)) {
 		syscall_fn_t syscall_fn;
 		syscall_fn = syscall_table[array_index_nospec(scno, sc_nr)];
 		ret = __invoke_syscall(regs, syscall_fn);
diff --git a/arch/arm64/kernel/traps.c b/arch/arm64/kernel/traps.c
index f528b6041f6a..5041817af267 100644
--- a/arch/arm64/kernel/traps.c
+++ b/arch/arm64/kernel/traps.c
@@ -1015,7 +1015,7 @@ int bug_brk_handler(struct pt_regs *regs, unsigned long esr)
 	return DBG_HOOK_HANDLED;
 }
 
-#ifdef CONFIG_CFI_CLANG
+#ifdef CONFIG_CFI
 int cfi_brk_handler(struct pt_regs *regs, unsigned long esr)
 {
 	unsigned long target;
@@ -1039,7 +1039,7 @@ int cfi_brk_handler(struct pt_regs *regs, unsigned long esr)
 	arm64_skip_faulting_instruction(regs, AARCH64_INSN_SIZE);
 	return DBG_HOOK_HANDLED;
 }
-#endif /* CONFIG_CFI_CLANG */
+#endif /* CONFIG_CFI */
 
 int reserved_fault_brk_handler(struct pt_regs *regs, unsigned long esr)
 {
diff --git a/arch/arm64/kernel/vdso32/Makefile b/arch/arm64/kernel/vdso32/Makefile
index f2dfdc7dc818..ffa3536581f6 100644
--- a/arch/arm64/kernel/vdso32/Makefile
+++ b/arch/arm64/kernel/vdso32/Makefile
@@ -21,8 +21,6 @@ endif
 
 cc32-option = $(call try-run,\
         $(CC_COMPAT) $(1) -c -x c /dev/null -o "$$TMP",$(1),$(2))
-cc32-disable-warning = $(call try-run,\
-	$(CC_COMPAT) -W$(strip $(1)) -c -x c /dev/null -o "$$TMP",-Wno-$(strip $(1)))
 
 # We cannot use the global flags to compile the vDSO files, the main reason
 # being that the 32-bit compiler may be older than the main (64-bit) compiler
@@ -59,10 +57,10 @@ VDSO_CAFLAGS += -DDISABLE_BRANCH_PROFILING
 VDSO_CAFLAGS += -march=armv8-a
 
 VDSO_CFLAGS := $(VDSO_CAFLAGS)
-VDSO_CFLAGS += -DENABLE_COMPAT_VDSO=1
 # KBUILD_CFLAGS from top-level Makefile
 VDSO_CFLAGS += -Wall -Wundef -Wstrict-prototypes -Wno-trigraphs \
                -fno-strict-aliasing -fno-common \
+               $(filter -Werror,$(KBUILD_CPPFLAGS)) \
                -Werror-implicit-function-declaration \
                -Wno-format-security \
                -std=gnu11
@@ -74,16 +72,6 @@ VDSO_CFLAGS += $(call cc32-option,-Werror=strict-prototypes)
 VDSO_CFLAGS += -Werror=date-time
 VDSO_CFLAGS += $(call cc32-option,-Werror=incompatible-pointer-types)
 
-# The 32-bit compiler does not provide 128-bit integers, which are used in
-# some headers that are indirectly included from the vDSO code.
-# This hack makes the compiler happy and should trigger a warning/error if
-# variables of such type are referenced.
-VDSO_CFLAGS += -D__uint128_t='void*'
-# Silence some warnings coming from headers that operate on long's
-# (on GCC 4.8 or older, there is unfortunately no way to silence this warning)
-VDSO_CFLAGS += $(call cc32-disable-warning,shift-count-overflow)
-VDSO_CFLAGS += -Wno-int-to-pointer-cast
-
 # Compile as THUMB2 or ARM. Unwinding via frame-pointers in THUMB2 is
 # unreliable.
 ifeq ($(CONFIG_THUMB2_COMPAT_VDSO), y)
diff --git a/arch/arm64/kvm/arm.c b/arch/arm64/kvm/arm.c
index 888f7c7abf54..bd6b6a620a09 100644
--- a/arch/arm64/kvm/arm.c
+++ b/arch/arm64/kvm/arm.c
@@ -2113,8 +2113,10 @@ static void cpu_hyp_init_features(void)
 {
 	cpu_set_hyp_vector();
 
-	if (is_kernel_in_hyp_mode())
+	if (is_kernel_in_hyp_mode()) {
 		kvm_timer_init_vhe();
+		kvm_debug_init_vhe();
+	}
 
 	if (vgic_present)
 		kvm_vgic_init_cpu_hardware();
@@ -2408,12 +2410,12 @@ static u64 get_hyp_id_aa64pfr0_el1(void)
 	 */
 	u64 val = read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1);
 
-	val &= ~(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV2) |
-		 ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV3));
+	val &= ~(ID_AA64PFR0_EL1_CSV2 |
+		 ID_AA64PFR0_EL1_CSV3);
 
-	val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV2),
+	val |= FIELD_PREP(ID_AA64PFR0_EL1_CSV2,
 			  arm64_get_spectre_v2_state() == SPECTRE_UNAFFECTED);
-	val |= FIELD_PREP(ARM64_FEATURE_MASK(ID_AA64PFR0_EL1_CSV3),
+	val |= FIELD_PREP(ID_AA64PFR0_EL1_CSV3,
 			  arm64_get_meltdown_state() == SPECTRE_UNAFFECTED);
 
 	return val;
diff --git a/arch/arm64/kvm/at.c b/arch/arm64/kvm/at.c
index 0e5610533949..d71ca4ddc9d1 100644
--- a/arch/arm64/kvm/at.c
+++ b/arch/arm64/kvm/at.c
@@ -1420,10 +1420,10 @@ void __kvm_at_s12(struct kvm_vcpu *vcpu, u32 op, u64 vaddr)
 		return;
 
 	/*
-	 * If we only have a single stage of translation (E2H=0 or
-	 * TGE=1), exit early. Same thing if {VM,DC}=={0,0}.
+	 * If we only have a single stage of translation (EL2&0), exit
+	 * early. Same thing if {VM,DC}=={0,0}.
 	 */
-	if (!vcpu_el2_e2h_is_set(vcpu) || vcpu_el2_tge_is_set(vcpu) ||
+	if (compute_translation_regime(vcpu, op) == TR_EL20 ||
 	    !(vcpu_read_sys_reg(vcpu, HCR_EL2) & (HCR_VM | HCR_DC)))
 		return;
 
diff --git a/arch/arm64/kvm/debug.c b/arch/arm64/kvm/debug.c
index 381382c19fe4..e027d9c32b0d 100644
--- a/arch/arm64/kvm/debug.c
+++ b/arch/arm64/kvm/debug.c
@@ -96,6 +96,13 @@ void kvm_init_host_debug_data(void)
 	}
 }
 
+void kvm_debug_init_vhe(void)
+{
+	/* Clear PMSCR_EL1.E{0,1}SPE which reset to UNKNOWN values. */
+	if (SYS_FIELD_GET(ID_AA64DFR0_EL1, PMSVer, read_sysreg(id_aa64dfr0_el1)))
+		write_sysreg_el1(0, SYS_PMSCR);
+}
+
 /*
  * Configures the 'external' MDSCR_EL1 value for the guest, i.e. when the host
  * has taken over MDSCR_EL1.
@@ -138,6 +145,9 @@ void kvm_vcpu_load_debug(struct kvm_vcpu *vcpu)
 	/* Must be called before kvm_vcpu_load_vhe() */
 	KVM_BUG_ON(vcpu_get_flag(vcpu, SYSREGS_ON_CPU), vcpu->kvm);
 
+	if (has_vhe())
+		*host_data_ptr(host_debug_state.mdcr_el2) = read_sysreg(mdcr_el2);
+
 	/*
 	 * Determine which of the possible debug states we're in:
 	 *
@@ -184,6 +194,9 @@ void kvm_vcpu_load_debug(struct kvm_vcpu *vcpu)
 
 void kvm_vcpu_put_debug(struct kvm_vcpu *vcpu)
 {
+	if (has_vhe())
+		write_sysreg(*host_data_ptr(host_debug_state.mdcr_el2), mdcr_el2);
+
 	if (likely(!(vcpu->guest_debug & KVM_GUESTDBG_SINGLESTEP)))
 		return;
 
diff --git a/arch/arm64/kvm/emulate-nested.c b/arch/arm64/kvm/emulate-nested.c
index 90cb4b7ae0ff..af69c897c2c3 100644
--- a/arch/arm64/kvm/emulate-nested.c
+++ b/arch/arm64/kvm/emulate-nested.c
@@ -2833,7 +2833,7 @@ int kvm_inject_nested_sea(struct kvm_vcpu *vcpu, bool iabt, u64 addr)
 			     iabt ? ESR_ELx_EC_IABT_LOW : ESR_ELx_EC_DABT_LOW);
 	esr |= ESR_ELx_FSC_EXTABT | ESR_ELx_IL;
 
-	vcpu_write_sys_reg(vcpu, FAR_EL2, addr);
+	vcpu_write_sys_reg(vcpu, addr, FAR_EL2);
 
 	if (__vcpu_sys_reg(vcpu, SCTLR2_EL2) & SCTLR2_EL1_EASE)
 		return kvm_inject_nested(vcpu, esr, except_type_serror);
diff --git a/arch/arm64/kvm/handle_exit.c b/arch/arm64/kvm/handle_exit.c
index a598072f36d2..8bdb1eed090a 100644
--- a/arch/arm64/kvm/handle_exit.c
+++ b/arch/arm64/kvm/handle_exit.c
@@ -545,7 +545,7 @@ void __noreturn __cold nvhe_hyp_panic_handler(u64 esr, u64 spsr,
 			kvm_err("nVHE hyp BUG at: %s:%u!\n", file, line);
 		else
 			print_nvhe_hyp_panic("BUG", panic_addr);
-	} else if (IS_ENABLED(CONFIG_CFI_CLANG) && esr_is_cfi_brk(esr)) {
+	} else if (IS_ENABLED(CONFIG_CFI) && esr_is_cfi_brk(esr)) {
 		kvm_nvhe_report_cfi_failure(panic_addr);
 	} else if (IS_ENABLED(CONFIG_UBSAN_KVM_EL2) &&
 		   ESR_ELx_EC(esr) == ESR_ELx_EC_BRK64 &&
diff --git a/arch/arm64/kvm/hyp/exception.c b/arch/arm64/kvm/hyp/exception.c
index 95d186e0bf54..bef40ddb16db 100644
--- a/arch/arm64/kvm/hyp/exception.c
+++ b/arch/arm64/kvm/hyp/exception.c
@@ -22,36 +22,28 @@
 
 static inline u64 __vcpu_read_sys_reg(const struct kvm_vcpu *vcpu, int reg)
 {
-	u64 val;
-
-	if (unlikely(vcpu_has_nv(vcpu)))
+	if (has_vhe())
 		return vcpu_read_sys_reg(vcpu, reg);
-	else if (vcpu_get_flag(vcpu, SYSREGS_ON_CPU) &&
-		 __vcpu_read_sys_reg_from_cpu(reg, &val))
-		return val;
 
 	return __vcpu_sys_reg(vcpu, reg);
 }
 
 static inline void __vcpu_write_sys_reg(struct kvm_vcpu *vcpu, u64 val, int reg)
 {
-	if (unlikely(vcpu_has_nv(vcpu)))
+	if (has_vhe())
 		vcpu_write_sys_reg(vcpu, val, reg);
-	else if (!vcpu_get_flag(vcpu, SYSREGS_ON_CPU) ||
-		 !__vcpu_write_sys_reg_to_cpu(val, reg))
+	else
 		__vcpu_assign_sys_reg(vcpu, reg, val);
 }
 
 static void __vcpu_write_spsr(struct kvm_vcpu *vcpu, unsigned long target_mode,
 			      u64 val)
 {
-	if (unlikely(vcpu_has_nv(vcpu))) {
+	if (has_vhe()) {
 		if (target_mode == PSR_MODE_EL1h)
 			vcpu_write_sys_reg(vcpu, val, SPSR_EL1);
 		else
 			vcpu_write_sys_reg(vcpu, val, SPSR_EL2);
-	} else if (has_vhe()) {
-		write_sysreg_el1(val, SYS_SPSR);
 	} else {
 		__vcpu_assign_sys_reg(vcpu, SPSR_EL1, val);
 	}
@@ -59,7 +51,7 @@ static void __vcpu_write_spsr(struct kvm_vcpu *vcpu, unsigned long target_mode,
 
 static void __vcpu_write_spsr_abt(struct kvm_vcpu *vcpu, u64 val)
 {
-	if (has_vhe())
+	if (has_vhe() && vcpu_get_flag(vcpu, SYSREGS_ON_CPU))
 		write_sysreg(val, spsr_abt);
 	else
 		vcpu->arch.ctxt.spsr_abt = val;
@@ -67,7 +59,7 @@ static void __vcpu_write_spsr_abt(struct kvm_vcpu *vcpu, u64 val)
 
 static void __vcpu_write_spsr_und(struct kvm_vcpu *vcpu, u64 val)
 {
-	if (has_vhe())
+	if (has_vhe() && vcpu_get_flag(vcpu, SYSREGS_ON_CPU))
 		write_sysreg(val, spsr_und);
 	else
 		vcpu->arch.ctxt.spsr_und = val;
diff --git a/arch/arm64/kvm/hyp/include/hyp/switch.h b/arch/arm64/kvm/hyp/include/hyp/switch.h
index 84ec4e100fbb..b6682202edf3 100644
--- a/arch/arm64/kvm/hyp/include/hyp/switch.h
+++ b/arch/arm64/kvm/hyp/include/hyp/switch.h
@@ -431,9 +431,6 @@ static inline void __activate_traps_common(struct kvm_vcpu *vcpu)
 		vcpu_set_flag(vcpu, PMUSERENR_ON_CPU);
 	}
 
-	*host_data_ptr(host_debug_state.mdcr_el2) = read_sysreg(mdcr_el2);
-	write_sysreg(vcpu->arch.mdcr_el2, mdcr_el2);
-
 	if (cpus_have_final_cap(ARM64_HAS_HCX)) {
 		u64 hcrx = vcpu->arch.hcrx_el2;
 		if (is_nested_ctxt(vcpu)) {
@@ -454,8 +451,6 @@ static inline void __deactivate_traps_common(struct kvm_vcpu *vcpu)
 {
 	struct kvm_cpu_context *hctxt = host_data_ptr(host_ctxt);
 
-	write_sysreg(*host_data_ptr(host_debug_state.mdcr_el2), mdcr_el2);
-
 	write_sysreg(0, hstr_el2);
 	if (system_supports_pmuv3()) {
 		write_sysreg(ctxt_sys_reg(hctxt, PMUSERENR_EL0), pmuserenr_el0);
diff --git a/arch/arm64/kvm/hyp/nvhe/list_debug.c b/arch/arm64/kvm/hyp/nvhe/list_debug.c
index 46a2d4f2b3c6..baa6260f88dc 100644
--- a/arch/arm64/kvm/hyp/nvhe/list_debug.c
+++ b/arch/arm64/kvm/hyp/nvhe/list_debug.c
@@ -17,7 +17,7 @@ static inline __must_check bool nvhe_check_data_corruption(bool v)
 		bool corruption = unlikely(condition);			 \
 		if (corruption) {					 \
 			if (IS_ENABLED(CONFIG_BUG_ON_DATA_CORRUPTION)) { \
-				BUG_ON(1);				 \
+				BUG();				 	 \
 			} else						 \
 				WARN_ON(1);				 \
 		}							 \
diff --git a/arch/arm64/kvm/hyp/nvhe/switch.c b/arch/arm64/kvm/hyp/nvhe/switch.c
index ccd575d5f6de..d3b9ec8a7c28 100644
--- a/arch/arm64/kvm/hyp/nvhe/switch.c
+++ b/arch/arm64/kvm/hyp/nvhe/switch.c
@@ -50,6 +50,10 @@ extern void kvm_nvhe_prepare_backtrace(unsigned long fp, unsigned long pc);
 static void __activate_traps(struct kvm_vcpu *vcpu)
 {
 	___activate_traps(vcpu, vcpu->arch.hcr_el2);
+
+	*host_data_ptr(host_debug_state.mdcr_el2) = read_sysreg(mdcr_el2);
+	write_sysreg(vcpu->arch.mdcr_el2, mdcr_el2);
+
 	__activate_traps_common(vcpu);
 	__activate_cptr_traps(vcpu);
 
@@ -93,6 +97,8 @@ static void __deactivate_traps(struct kvm_vcpu *vcpu)
 		isb();
 	}
 
+	write_sysreg(*host_data_ptr(host_debug_state.mdcr_el2), mdcr_el2);
+
 	__deactivate_traps_common(vcpu);
 
 	write_sysreg_hcr(this_cpu_ptr(&kvm_init_params)->hcr_el2);
diff --git a/arch/arm64/kvm/hyp/nvhe/sys_regs.c b/arch/arm64/kvm/hyp/nvhe/sys_regs.c
index 1ddd9ed3cbb3..82da9b03692d 100644
--- a/arch/arm64/kvm/hyp/nvhe/sys_regs.c
+++ b/arch/arm64/kvm/hyp/nvhe/sys_regs.c
@@ -253,6 +253,7 @@ static void inject_undef64(struct kvm_vcpu *vcpu)
 
 	*vcpu_pc(vcpu) = read_sysreg_el2(SYS_ELR);
 	*vcpu_cpsr(vcpu) = read_sysreg_el2(SYS_SPSR);
+	__vcpu_assign_sys_reg(vcpu, VBAR_EL1, read_sysreg_el1(SYS_VBAR));
 
 	kvm_pend_exception(vcpu, EXCEPT_AA64_EL1_SYNC);
 
@@ -372,6 +373,9 @@ static const struct sys_reg_desc pvm_sys_reg_descs[] = {
 
 	/* Debug and Trace Registers are restricted. */
 
+	/* Group 1 ID registers */
+	HOST_HANDLED(SYS_REVIDR_EL1),
+
 	/* AArch64 mappings of the AArch32 ID registers */
 	/* CRm=1 */
 	AARCH32(SYS_ID_PFR0_EL1),
@@ -460,6 +464,7 @@ static const struct sys_reg_desc pvm_sys_reg_descs[] = {
 
 	HOST_HANDLED(SYS_CCSIDR_EL1),
 	HOST_HANDLED(SYS_CLIDR_EL1),
+	HOST_HANDLED(SYS_AIDR_EL1),
 	HOST_HANDLED(SYS_CSSELR_EL1),
 	HOST_HANDLED(SYS_CTR_EL0),
 
diff --git a/arch/arm64/kvm/hyp/vgic-v2-cpuif-proxy.c b/arch/arm64/kvm/hyp/vgic-v2-cpuif-proxy.c
index 87a54375bd6e..78579b31a420 100644
--- a/arch/arm64/kvm/hyp/vgic-v2-cpuif-proxy.c
+++ b/arch/arm64/kvm/hyp/vgic-v2-cpuif-proxy.c
@@ -20,7 +20,7 @@ static bool __is_be(struct kvm_vcpu *vcpu)
 	if (vcpu_mode_is_32bit(vcpu))
 		return !!(read_sysreg_el2(SYS_SPSR) & PSR_AA32_E_BIT);
 
-	return !!(read_sysreg(SCTLR_EL1) & SCTLR_ELx_EE);
+	return !!(read_sysreg_el1(SYS_SCTLR) & SCTLR_ELx_EE);
 }
 
 /*
diff --git a/arch/arm64/kvm/hyp/vhe/switch.c b/arch/arm64/kvm/hyp/vhe/switch.c
index e482181c6632..0998ad4a2552 100644
--- a/arch/arm64/kvm/hyp/vhe/switch.c
+++ b/arch/arm64/kvm/hyp/vhe/switch.c
@@ -43,8 +43,11 @@ DEFINE_PER_CPU(unsigned long, kvm_hyp_vector);
  *
  * - API/APK: they are already accounted for by vcpu_load(), and can
  *   only take effect across a load/put cycle (such as ERET)
+ *
+ * - FIEN: no way we let a guest have access to the RAS "Common Fault
+ *   Injection" thing, whatever that does
  */
-#define NV_HCR_GUEST_EXCLUDE	(HCR_TGE | HCR_API | HCR_APK)
+#define NV_HCR_GUEST_EXCLUDE	(HCR_TGE | HCR_API | HCR_APK | HCR_FIEN)
 
 static u64 __compute_hcr(struct kvm_vcpu *vcpu)
 {
diff --git a/arch/arm64/kvm/mmu.c b/arch/arm64/kvm/mmu.c
index 1c78864767c5..736394292503 100644
--- a/arch/arm64/kvm/mmu.c
+++ b/arch/arm64/kvm/mmu.c
@@ -4,19 +4,20 @@
  * Author: Christoffer Dall <c.dall@virtualopensystems.com>
  */
 
+#include <linux/acpi.h>
 #include <linux/mman.h>
 #include <linux/kvm_host.h>
 #include <linux/io.h>
 #include <linux/hugetlb.h>
 #include <linux/sched/signal.h>
 #include <trace/events/kvm.h>
+#include <asm/acpi.h>
 #include <asm/pgalloc.h>
 #include <asm/cacheflush.h>
 #include <asm/kvm_arm.h>
 #include <asm/kvm_mmu.h>
 #include <asm/kvm_pgtable.h>
 #include <asm/kvm_pkvm.h>
-#include <asm/kvm_ras.h>
 #include <asm/kvm_asm.h>
 #include <asm/kvm_emulate.h>
 #include <asm/virt.h>
@@ -1073,6 +1074,10 @@ void kvm_free_stage2_pgd(struct kvm_s2_mmu *mmu)
 		mmu->pgt = NULL;
 		free_percpu(mmu->last_vcpu_ran);
 	}
+
+	if (kvm_is_nested_s2_mmu(kvm, mmu))
+		kvm_init_nested_s2_mmu(mmu);
+
 	write_unlock(&kvm->mmu_lock);
 
 	if (pgt) {
@@ -1508,11 +1513,6 @@ static int user_mem_abort(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa,
 	exec_fault = kvm_vcpu_trap_is_exec_fault(vcpu);
 	VM_BUG_ON(write_fault && exec_fault);
 
-	if (fault_is_perm && !write_fault && !exec_fault) {
-		kvm_err("Unexpected L2 read permission error\n");
-		return -EFAULT;
-	}
-
 	if (!is_protected_kvm_enabled())
 		memcache = &vcpu->arch.mmu_page_cache;
 	else
@@ -1811,6 +1811,19 @@ static void handle_access_fault(struct kvm_vcpu *vcpu, phys_addr_t fault_ipa)
 	read_unlock(&vcpu->kvm->mmu_lock);
 }
 
+int kvm_handle_guest_sea(struct kvm_vcpu *vcpu)
+{
+	/*
+	 * Give APEI the opportunity to claim the abort before handling it
+	 * within KVM. apei_claim_sea() expects to be called with IRQs enabled.
+	 */
+	lockdep_assert_irqs_enabled();
+	if (apei_claim_sea(NULL) == 0)
+		return 1;
+
+	return kvm_inject_serror(vcpu);
+}
+
 /**
  * kvm_handle_guest_abort - handles all 2nd stage aborts
  * @vcpu:	the VCPU pointer
@@ -1834,17 +1847,8 @@ int kvm_handle_guest_abort(struct kvm_vcpu *vcpu)
 	gfn_t gfn;
 	int ret, idx;
 
-	/* Synchronous External Abort? */
-	if (kvm_vcpu_abt_issea(vcpu)) {
-		/*
-		 * For RAS the host kernel may handle this abort.
-		 * There is no need to pass the error into the guest.
-		 */
-		if (kvm_handle_guest_sea())
-			return kvm_inject_serror(vcpu);
-
-		return 1;
-	}
+	if (kvm_vcpu_abt_issea(vcpu))
+		return kvm_handle_guest_sea(vcpu);
 
 	esr = kvm_vcpu_get_esr(vcpu);
 
diff --git a/arch/arm64/kvm/nested.c b/arch/arm64/kvm/nested.c
index 153b3e11b115..50d559248a1f 100644
--- a/arch/arm64/kvm/nested.c
+++ b/arch/arm64/kvm/nested.c
@@ -847,7 +847,7 @@ static void kvm_invalidate_vncr_ipa(struct kvm *kvm, u64 start, u64 end)
 
 		ipa_size = ttl_to_size(pgshift_level_to_ttl(vt->wi.pgshift,
 							    vt->wr.level));
-		ipa_start = vt->wr.pa & (ipa_size - 1);
+		ipa_start = vt->wr.pa & ~(ipa_size - 1);
 		ipa_end = ipa_start + ipa_size;
 
 		if (ipa_end <= start || ipa_start >= end)
@@ -887,7 +887,7 @@ static void invalidate_vncr_va(struct kvm *kvm,
 
 		va_size = ttl_to_size(pgshift_level_to_ttl(vt->wi.pgshift,
 							   vt->wr.level));
-		va_start = vt->gva & (va_size - 1);
+		va_start = vt->gva & ~(va_size - 1);
 		va_end = va_start + va_size;
 
 		switch (scope->type) {
@@ -1276,7 +1276,7 @@ static bool kvm_vncr_tlb_lookup(struct kvm_vcpu *vcpu)
 		    !(tcr & TCR_ASID16))
 			asid &= GENMASK(7, 0);
 
-		return asid != vt->wr.asid;
+		return asid == vt->wr.asid;
 	}
 
 	return true;
@@ -1287,7 +1287,10 @@ int kvm_handle_vncr_abort(struct kvm_vcpu *vcpu)
 	struct vncr_tlb *vt = vcpu->arch.vncr_tlb;
 	u64 esr = kvm_vcpu_get_esr(vcpu);
 
-	BUG_ON(!(esr & ESR_ELx_VNCR_SHIFT));
+	WARN_ON_ONCE(!(esr & ESR_ELx_VNCR));
+
+	if (kvm_vcpu_abt_issea(vcpu))
+		return kvm_handle_guest_sea(vcpu);
 
 	if (esr_fsc_is_permission_fault(esr)) {
 		inject_vncr_perm(vcpu);
diff --git a/arch/arm64/kvm/sys_regs.c b/arch/arm64/kvm/sys_regs.c
index 82ffb3b3b3cf..b29f72478a50 100644
--- a/arch/arm64/kvm/sys_regs.c
+++ b/arch/arm64/kvm/sys_regs.c
@@ -82,43 +82,105 @@ static bool write_to_read_only(struct kvm_vcpu *vcpu,
 			"sys_reg write to read-only register");
 }
 
-#define PURE_EL2_SYSREG(el2)						\
-	case el2: {							\
-		*el1r = el2;						\
-		return true;						\
+enum sr_loc_attr {
+	SR_LOC_MEMORY	= 0,	  /* Register definitely in memory */
+	SR_LOC_LOADED	= BIT(0), /* Register on CPU, unless it cannot */
+	SR_LOC_MAPPED	= BIT(1), /* Register in a different CPU register */
+	SR_LOC_XLATED	= BIT(2), /* Register translated to fit another reg */
+	SR_LOC_SPECIAL	= BIT(3), /* Demanding register, implies loaded */
+};
+
+struct sr_loc {
+	enum sr_loc_attr loc;
+	enum vcpu_sysreg map_reg;
+	u64		 (*xlate)(u64);
+};
+
+static enum sr_loc_attr locate_direct_register(const struct kvm_vcpu *vcpu,
+					       enum vcpu_sysreg reg)
+{
+	switch (reg) {
+	case SCTLR_EL1:
+	case CPACR_EL1:
+	case TTBR0_EL1:
+	case TTBR1_EL1:
+	case TCR_EL1:
+	case TCR2_EL1:
+	case PIR_EL1:
+	case PIRE0_EL1:
+	case POR_EL1:
+	case ESR_EL1:
+	case AFSR0_EL1:
+	case AFSR1_EL1:
+	case FAR_EL1:
+	case MAIR_EL1:
+	case VBAR_EL1:
+	case CONTEXTIDR_EL1:
+	case AMAIR_EL1:
+	case CNTKCTL_EL1:
+	case ELR_EL1:
+	case SPSR_EL1:
+	case ZCR_EL1:
+	case SCTLR2_EL1:
+		/*
+		 * EL1 registers which have an ELx2 mapping are loaded if
+		 * we're not in hypervisor context.
+		 */
+		return is_hyp_ctxt(vcpu) ? SR_LOC_MEMORY : SR_LOC_LOADED;
+
+	case TPIDR_EL0:
+	case TPIDRRO_EL0:
+	case TPIDR_EL1:
+	case PAR_EL1:
+	case DACR32_EL2:
+	case IFSR32_EL2:
+	case DBGVCR32_EL2:
+		/* These registers are always loaded, no matter what */
+		return SR_LOC_LOADED;
+
+	default:
+		/* Non-mapped EL2 registers are by definition in memory. */
+		return SR_LOC_MEMORY;
 	}
+}
 
-#define MAPPED_EL2_SYSREG(el2, el1, fn)					\
-	case el2: {							\
-		*xlate = fn;						\
-		*el1r = el1;						\
-		return true;						\
+static void locate_mapped_el2_register(const struct kvm_vcpu *vcpu,
+				       enum vcpu_sysreg reg,
+				       enum vcpu_sysreg map_reg,
+				       u64 (*xlate)(u64),
+				       struct sr_loc *loc)
+{
+	if (!is_hyp_ctxt(vcpu)) {
+		loc->loc = SR_LOC_MEMORY;
+		return;
+	}
+
+	loc->loc = SR_LOC_LOADED | SR_LOC_MAPPED;
+	loc->map_reg = map_reg;
+
+	WARN_ON(locate_direct_register(vcpu, map_reg) != SR_LOC_MEMORY);
+
+	if (xlate != NULL && !vcpu_el2_e2h_is_set(vcpu)) {
+		loc->loc |= SR_LOC_XLATED;
+		loc->xlate = xlate;
 	}
+}
 
-static bool get_el2_to_el1_mapping(unsigned int reg,
-				   unsigned int *el1r, u64 (**xlate)(u64))
+#define MAPPED_EL2_SYSREG(r, m, t)					\
+	case r:	{							\
+		locate_mapped_el2_register(vcpu, r, m, t, loc);		\
+		break;							\
+	}
+
+static void locate_register(const struct kvm_vcpu *vcpu, enum vcpu_sysreg reg,
+			    struct sr_loc *loc)
 {
+	if (!vcpu_get_flag(vcpu, SYSREGS_ON_CPU)) {
+		loc->loc = SR_LOC_MEMORY;
+		return;
+	}
+
 	switch (reg) {
-		PURE_EL2_SYSREG(  VPIDR_EL2	);
-		PURE_EL2_SYSREG(  VMPIDR_EL2	);
-		PURE_EL2_SYSREG(  ACTLR_EL2	);
-		PURE_EL2_SYSREG(  HCR_EL2	);
-		PURE_EL2_SYSREG(  MDCR_EL2	);
-		PURE_EL2_SYSREG(  HSTR_EL2	);
-		PURE_EL2_SYSREG(  HACR_EL2	);
-		PURE_EL2_SYSREG(  VTTBR_EL2	);
-		PURE_EL2_SYSREG(  VTCR_EL2	);
-		PURE_EL2_SYSREG(  TPIDR_EL2	);
-		PURE_EL2_SYSREG(  HPFAR_EL2	);
-		PURE_EL2_SYSREG(  HCRX_EL2	);
-		PURE_EL2_SYSREG(  HFGRTR_EL2	);
-		PURE_EL2_SYSREG(  HFGWTR_EL2	);
-		PURE_EL2_SYSREG(  HFGITR_EL2	);
-		PURE_EL2_SYSREG(  HDFGRTR_EL2	);
-		PURE_EL2_SYSREG(  HDFGWTR_EL2	);
-		PURE_EL2_SYSREG(  HAFGRTR_EL2	);
-		PURE_EL2_SYSREG(  CNTVOFF_EL2	);
-		PURE_EL2_SYSREG(  CNTHCTL_EL2	);
 		MAPPED_EL2_SYSREG(SCTLR_EL2,   SCTLR_EL1,
 				  translate_sctlr_el2_to_sctlr_el1	     );
 		MAPPED_EL2_SYSREG(CPTR_EL2,    CPACR_EL1,
@@ -144,125 +206,189 @@ static bool get_el2_to_el1_mapping(unsigned int reg,
 		MAPPED_EL2_SYSREG(ZCR_EL2,     ZCR_EL1,     NULL	     );
 		MAPPED_EL2_SYSREG(CONTEXTIDR_EL2, CONTEXTIDR_EL1, NULL	     );
 		MAPPED_EL2_SYSREG(SCTLR2_EL2,  SCTLR2_EL1,  NULL	     );
+	case CNTHCTL_EL2:
+		/* CNTHCTL_EL2 is super special, until we support NV2.1 */
+		loc->loc = ((is_hyp_ctxt(vcpu) && vcpu_el2_e2h_is_set(vcpu)) ?
+			    SR_LOC_SPECIAL : SR_LOC_MEMORY);
+		break;
 	default:
-		return false;
+		loc->loc = locate_direct_register(vcpu, reg);
 	}
 }
 
-u64 vcpu_read_sys_reg(const struct kvm_vcpu *vcpu, int reg)
+static u64 read_sr_from_cpu(enum vcpu_sysreg reg)
 {
 	u64 val = 0x8badf00d8badf00d;
-	u64 (*xlate)(u64) = NULL;
-	unsigned int el1r;
 
-	if (!vcpu_get_flag(vcpu, SYSREGS_ON_CPU))
-		goto memory_read;
+	switch (reg) {
+	case SCTLR_EL1:		val = read_sysreg_s(SYS_SCTLR_EL12);	break;
+	case CPACR_EL1:		val = read_sysreg_s(SYS_CPACR_EL12);	break;
+	case TTBR0_EL1:		val = read_sysreg_s(SYS_TTBR0_EL12);	break;
+	case TTBR1_EL1:		val = read_sysreg_s(SYS_TTBR1_EL12);	break;
+	case TCR_EL1:		val = read_sysreg_s(SYS_TCR_EL12);	break;
+	case TCR2_EL1:		val = read_sysreg_s(SYS_TCR2_EL12);	break;
+	case PIR_EL1:		val = read_sysreg_s(SYS_PIR_EL12);	break;
+	case PIRE0_EL1:		val = read_sysreg_s(SYS_PIRE0_EL12);	break;
+	case POR_EL1:		val = read_sysreg_s(SYS_POR_EL12);	break;
+	case ESR_EL1:		val = read_sysreg_s(SYS_ESR_EL12);	break;
+	case AFSR0_EL1:		val = read_sysreg_s(SYS_AFSR0_EL12);	break;
+	case AFSR1_EL1:		val = read_sysreg_s(SYS_AFSR1_EL12);	break;
+	case FAR_EL1:		val = read_sysreg_s(SYS_FAR_EL12);	break;
+	case MAIR_EL1:		val = read_sysreg_s(SYS_MAIR_EL12);	break;
+	case VBAR_EL1:		val = read_sysreg_s(SYS_VBAR_EL12);	break;
+	case CONTEXTIDR_EL1:	val = read_sysreg_s(SYS_CONTEXTIDR_EL12);break;
+	case AMAIR_EL1:		val = read_sysreg_s(SYS_AMAIR_EL12);	break;
+	case CNTKCTL_EL1:	val = read_sysreg_s(SYS_CNTKCTL_EL12);	break;
+	case ELR_EL1:		val = read_sysreg_s(SYS_ELR_EL12);	break;
+	case SPSR_EL1:		val = read_sysreg_s(SYS_SPSR_EL12);	break;
+	case ZCR_EL1:		val = read_sysreg_s(SYS_ZCR_EL12);	break;
+	case SCTLR2_EL1:	val = read_sysreg_s(SYS_SCTLR2_EL12);	break;
+	case TPIDR_EL0:		val = read_sysreg_s(SYS_TPIDR_EL0);	break;
+	case TPIDRRO_EL0:	val = read_sysreg_s(SYS_TPIDRRO_EL0);	break;
+	case TPIDR_EL1:		val = read_sysreg_s(SYS_TPIDR_EL1);	break;
+	case PAR_EL1:		val = read_sysreg_par();		break;
+	case DACR32_EL2:	val = read_sysreg_s(SYS_DACR32_EL2);	break;
+	case IFSR32_EL2:	val = read_sysreg_s(SYS_IFSR32_EL2);	break;
+	case DBGVCR32_EL2:	val = read_sysreg_s(SYS_DBGVCR32_EL2);	break;
+	default:		WARN_ON_ONCE(1);
+	}
 
-	if (unlikely(get_el2_to_el1_mapping(reg, &el1r, &xlate))) {
-		if (!is_hyp_ctxt(vcpu))
-			goto memory_read;
+	return val;
+}
+
+static void write_sr_to_cpu(enum vcpu_sysreg reg, u64 val)
+{
+	switch (reg) {
+	case SCTLR_EL1:		write_sysreg_s(val, SYS_SCTLR_EL12);	break;
+	case CPACR_EL1:		write_sysreg_s(val, SYS_CPACR_EL12);	break;
+	case TTBR0_EL1:		write_sysreg_s(val, SYS_TTBR0_EL12);	break;
+	case TTBR1_EL1:		write_sysreg_s(val, SYS_TTBR1_EL12);	break;
+	case TCR_EL1:		write_sysreg_s(val, SYS_TCR_EL12);	break;
+	case TCR2_EL1:		write_sysreg_s(val, SYS_TCR2_EL12);	break;
+	case PIR_EL1:		write_sysreg_s(val, SYS_PIR_EL12);	break;
+	case PIRE0_EL1:		write_sysreg_s(val, SYS_PIRE0_EL12);	break;
+	case POR_EL1:		write_sysreg_s(val, SYS_POR_EL12);	break;
+	case ESR_EL1:		write_sysreg_s(val, SYS_ESR_EL12);	break;
+	case AFSR0_EL1:		write_sysreg_s(val, SYS_AFSR0_EL12);	break;
+	case AFSR1_EL1:		write_sysreg_s(val, SYS_AFSR1_EL12);	break;
+	case FAR_EL1:		write_sysreg_s(val, SYS_FAR_EL12);	break;
+	case MAIR_EL1:		write_sysreg_s(val, SYS_MAIR_EL12);	break;
+	case VBAR_EL1:		write_sysreg_s(val, SYS_VBAR_EL12);	break;
+	case CONTEXTIDR_EL1:	write_sysreg_s(val, SYS_CONTEXTIDR_EL12);break;
+	case AMAIR_EL1:		write_sysreg_s(val, SYS_AMAIR_EL12);	break;
+	case CNTKCTL_EL1:	write_sysreg_s(val, SYS_CNTKCTL_EL12);	break;
+	case ELR_EL1:		write_sysreg_s(val, SYS_ELR_EL12);	break;
+	case SPSR_EL1:		write_sysreg_s(val, SYS_SPSR_EL12);	break;
+	case ZCR_EL1:		write_sysreg_s(val, SYS_ZCR_EL12);	break;
+	case SCTLR2_EL1:	write_sysreg_s(val, SYS_SCTLR2_EL12);	break;
+	case TPIDR_EL0:		write_sysreg_s(val, SYS_TPIDR_EL0);	break;
+	case TPIDRRO_EL0:	write_sysreg_s(val, SYS_TPIDRRO_EL0);	break;
+	case TPIDR_EL1:		write_sysreg_s(val, SYS_TPIDR_EL1);	break;
+	case PAR_EL1:		write_sysreg_s(val, SYS_PAR_EL1);	break;
+	case DACR32_EL2:	write_sysreg_s(val, SYS_DACR32_EL2);	break;
+	case IFSR32_EL2:	write_sysreg_s(val, SYS_IFSR32_EL2);	break;
+	case DBGVCR32_EL2:	write_sysreg_s(val, SYS_DBGVCR32_EL2);	break;
+	default:		WARN_ON_ONCE(1);
+	}
+}
+
+u64 vcpu_read_sys_reg(const struct kvm_vcpu *vcpu, enum vcpu_sysreg reg)
+{
+	struct sr_loc loc = {};
+
+	locate_register(vcpu, reg, &loc);
+
+	WARN_ON_ONCE(!has_vhe() && loc.loc != SR_LOC_MEMORY);
+
+	if (loc.loc & SR_LOC_SPECIAL) {
+		u64 val;
+
+		WARN_ON_ONCE(loc.loc & ~SR_LOC_SPECIAL);
 
 		/*
-		 * CNTHCTL_EL2 requires some special treatment to
-		 * account for the bits that can be set via CNTKCTL_EL1.
+		 * CNTHCTL_EL2 requires some special treatment to account
+		 * for the bits that can be set via CNTKCTL_EL1 when E2H==1.
 		 */
 		switch (reg) {
 		case CNTHCTL_EL2:
-			if (vcpu_el2_e2h_is_set(vcpu)) {
-				val = read_sysreg_el1(SYS_CNTKCTL);
-				val &= CNTKCTL_VALID_BITS;
-				val |= __vcpu_sys_reg(vcpu, reg) & ~CNTKCTL_VALID_BITS;
-				return val;
-			}
-			break;
+			val = read_sysreg_el1(SYS_CNTKCTL);
+			val &= CNTKCTL_VALID_BITS;
+			val |= __vcpu_sys_reg(vcpu, reg) & ~CNTKCTL_VALID_BITS;
+			return val;
+		default:
+			WARN_ON_ONCE(1);
 		}
+	}
 
-		/*
-		 * If this register does not have an EL1 counterpart,
-		 * then read the stored EL2 version.
-		 */
-		if (reg == el1r)
-			goto memory_read;
+	if (loc.loc & SR_LOC_LOADED) {
+		enum vcpu_sysreg map_reg = reg;
 
-		/*
-		 * If we have a non-VHE guest and that the sysreg
-		 * requires translation to be used at EL1, use the
-		 * in-memory copy instead.
-		 */
-		if (!vcpu_el2_e2h_is_set(vcpu) && xlate)
-			goto memory_read;
+		if (loc.loc & SR_LOC_MAPPED)
+			map_reg = loc.map_reg;
 
-		/* Get the current version of the EL1 counterpart. */
-		WARN_ON(!__vcpu_read_sys_reg_from_cpu(el1r, &val));
-		if (reg >= __SANITISED_REG_START__)
-			val = kvm_vcpu_apply_reg_masks(vcpu, reg, val);
-
-		return val;
-	}
+		if (!(loc.loc & SR_LOC_XLATED)) {
+			u64 val = read_sr_from_cpu(map_reg);
 
-	/* EL1 register can't be on the CPU if the guest is in vEL2. */
-	if (unlikely(is_hyp_ctxt(vcpu)))
-		goto memory_read;
+			if (reg >= __SANITISED_REG_START__)
+				val = kvm_vcpu_apply_reg_masks(vcpu, reg, val);
 
-	if (__vcpu_read_sys_reg_from_cpu(reg, &val))
-		return val;
+			return val;
+		}
+	}
 
-memory_read:
 	return __vcpu_sys_reg(vcpu, reg);
 }
 
-void vcpu_write_sys_reg(struct kvm_vcpu *vcpu, u64 val, int reg)
+void vcpu_write_sys_reg(struct kvm_vcpu *vcpu, u64 val, enum vcpu_sysreg reg)
 {
-	u64 (*xlate)(u64) = NULL;
-	unsigned int el1r;
+	struct sr_loc loc = {};
 
-	if (!vcpu_get_flag(vcpu, SYSREGS_ON_CPU))
-		goto memory_write;
+	locate_register(vcpu, reg, &loc);
 
-	if (unlikely(get_el2_to_el1_mapping(reg, &el1r, &xlate))) {
-		if (!is_hyp_ctxt(vcpu))
-			goto memory_write;
+	WARN_ON_ONCE(!has_vhe() && loc.loc != SR_LOC_MEMORY);
 
-		/*
-		 * Always store a copy of the write to memory to avoid having
-		 * to reverse-translate virtual EL2 system registers for a
-		 * non-VHE guest hypervisor.
-		 */
-		__vcpu_assign_sys_reg(vcpu, reg, val);
+	if (loc.loc & SR_LOC_SPECIAL) {
+
+		WARN_ON_ONCE(loc.loc & ~SR_LOC_SPECIAL);
 
 		switch (reg) {
 		case CNTHCTL_EL2:
 			/*
-			 * If E2H=0, CNHTCTL_EL2 is a pure shadow register.
-			 * Otherwise, some of the bits are backed by
+			 * If E2H=1, some of the bits are backed by
 			 * CNTKCTL_EL1, while the rest is kept in memory.
 			 * Yes, this is fun stuff.
 			 */
-			if (vcpu_el2_e2h_is_set(vcpu))
-				write_sysreg_el1(val, SYS_CNTKCTL);
-			return;
+			write_sysreg_el1(val, SYS_CNTKCTL);
+			break;
+		default:
+			WARN_ON_ONCE(1);
 		}
+	}
 
-		/* No EL1 counterpart? We're done here.? */
-		if (reg == el1r)
-			return;
+	if (loc.loc & SR_LOC_LOADED) {
+		enum vcpu_sysreg map_reg = reg;
+		u64 xlated_val;
 
-		if (!vcpu_el2_e2h_is_set(vcpu) && xlate)
-			val = xlate(val);
+		if (reg >= __SANITISED_REG_START__)
+			val = kvm_vcpu_apply_reg_masks(vcpu, reg, val);
 
-		/* Redirect this to the EL1 version of the register. */
-		WARN_ON(!__vcpu_write_sys_reg_to_cpu(val, el1r));
-		return;
-	}
+		if (loc.loc & SR_LOC_MAPPED)
+			map_reg = loc.map_reg;
 
-	/* EL1 register can't be on the CPU if the guest is in vEL2. */
-	if (unlikely(is_hyp_ctxt(vcpu)))
-		goto memory_write;
+		if (loc.loc & SR_LOC_XLATED)
+			xlated_val = loc.xlate(val);
+		else
+			xlated_val = val;
 
-	if (__vcpu_write_sys_reg_to_cpu(val, reg))
-		return;
+		write_sr_to_cpu(map_reg, xlated_val);
+
+		/*
+		 * Fall through to write the backing store anyway, which
+		 * allows translated registers to be directly read without a
+		 * reverse translation.
+		 */
+	}
 
-memory_write:
 	__vcpu_assign_sys_reg(vcpu, reg, val);
 }
 
@@ -1584,6 +1710,7 @@ static u8 pmuver_to_perfmon(u8 pmuver)
 }
 
 static u64 sanitise_id_aa64pfr0_el1(const struct kvm_vcpu *vcpu, u64 val);
+static u64 sanitise_id_aa64pfr1_el1(const struct kvm_vcpu *vcpu, u64 val);
 static u64 sanitise_id_aa64dfr0_el1(const struct kvm_vcpu *vcpu, u64 val);
 
 /* Read a sanitised cpufeature ID register by sys_reg_desc */
@@ -1606,19 +1733,7 @@ static u64 __kvm_read_sanitised_id_reg(const struct kvm_vcpu *vcpu,
 		val = sanitise_id_aa64pfr0_el1(vcpu, val);
 		break;
 	case SYS_ID_AA64PFR1_EL1:
-		if (!kvm_has_mte(vcpu->kvm)) {
-			val &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_MTE);
-			val &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_MTE_frac);
-		}
-
-		val &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_SME);
-		val &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_RNDR_trap);
-		val &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_NMI);
-		val &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_GCS);
-		val &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_THE);
-		val &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_MTEX);
-		val &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_PFAR);
-		val &= ~ARM64_FEATURE_MASK(ID_AA64PFR1_EL1_MPAM_frac);
+		val = sanitise_id_aa64pfr1_el1(vcpu, val);
 		break;
 	case SYS_ID_AA64PFR2_EL1:
 		val &= ID_AA64PFR2_EL1_FPMR |
@@ -1628,18 +1743,18 @@ static u64 __kvm_read_sanitised_id_reg(const struct kvm_vcpu *vcpu,
 		break;
 	case SYS_ID_AA64ISAR1_EL1:
 		if (!vcpu_has_ptrauth(vcpu))
-			val &= ~(ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_APA) |
-				 ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_API) |
-				 ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_GPA) |
-				 ARM64_FEATURE_MASK(ID_AA64ISAR1_EL1_GPI));
+			val &= ~(ID_AA64ISAR1_EL1_APA |
+				 ID_AA64ISAR1_EL1_API |
+				 ID_AA64ISAR1_EL1_GPA |
+				 ID_AA64ISAR1_EL1_GPI);
 		break;
 	case SYS_ID_AA64ISAR2_EL1:
 		if (!vcpu_has_ptrauth(vcpu))
-			val &= ~(ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_APA3) |
-				 ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_GPA3));
+			val &= ~(ID_AA64ISAR2_EL1_APA3 |
+				 ID_AA64ISAR2_EL1_GPA3);
 		if (!cpus_have_final_cap(ARM64_HAS_WFXT) ||
 		    has_broken_cntvoff())
-			val &= ~ARM64_FEATURE_MASK(ID_AA64ISAR2_EL1_WFxT);
+			val &= ~ID_AA64ISAR2_EL1_WFxT;
 		break;
 	case SYS_ID_AA64ISAR3_EL1:
 		val &= ID_AA64ISAR3_EL1_FPRCVT | ID_AA64ISAR3_EL1_FAMINMAX;
@@ -1655,7 +1770,7 @@ static u64 __kvm_read_sanitised_id_reg(const struct kvm_vcpu *vcpu,
 		       ID_AA64MMFR3_EL1_S1PIE;
 		break;
 	case SYS_ID_MMFR4_EL1:
-		val &= ~ARM64_FEATURE_MASK(ID_MMFR4_EL1_CCIDX);
+		val &= ~ID_MMFR4_EL1_CCIDX;
 		break;
 	}
 
@@ -1836,6 +1951,31 @@ static u64 sanitise_id_aa64pfr0_el1(const struct kvm_vcpu *vcpu, u64 val)
 	return val;
 }
 
+static u64 sanitise_id_aa64pfr1_el1(const struct kvm_vcpu *vcpu, u64 val)
+{
+	u64 pfr0 = read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1);
+
+	if (!kvm_has_mte(vcpu->kvm)) {
+		val &= ~ID_AA64PFR1_EL1_MTE;
+		val &= ~ID_AA64PFR1_EL1_MTE_frac;
+	}
+
+	if (!(cpus_have_final_cap(ARM64_HAS_RASV1P1_EXTN) &&
+	      SYS_FIELD_GET(ID_AA64PFR0_EL1, RAS, pfr0) == ID_AA64PFR0_EL1_RAS_IMP))
+		val &= ~ID_AA64PFR1_EL1_RAS_frac;
+
+	val &= ~ID_AA64PFR1_EL1_SME;
+	val &= ~ID_AA64PFR1_EL1_RNDR_trap;
+	val &= ~ID_AA64PFR1_EL1_NMI;
+	val &= ~ID_AA64PFR1_EL1_GCS;
+	val &= ~ID_AA64PFR1_EL1_THE;
+	val &= ~ID_AA64PFR1_EL1_MTEX;
+	val &= ~ID_AA64PFR1_EL1_PFAR;
+	val &= ~ID_AA64PFR1_EL1_MPAM_frac;
+
+	return val;
+}
+
 static u64 sanitise_id_aa64dfr0_el1(const struct kvm_vcpu *vcpu, u64 val)
 {
 	val = ID_REG_LIMIT_FIELD_ENUM(val, ID_AA64DFR0_EL1, DebugVer, V8P8);
@@ -2697,6 +2837,18 @@ static bool access_ras(struct kvm_vcpu *vcpu,
 	struct kvm *kvm = vcpu->kvm;
 
 	switch(reg_to_encoding(r)) {
+	case SYS_ERXPFGCDN_EL1:
+	case SYS_ERXPFGCTL_EL1:
+	case SYS_ERXPFGF_EL1:
+	case SYS_ERXMISC2_EL1:
+	case SYS_ERXMISC3_EL1:
+		if (!(kvm_has_feat(kvm, ID_AA64PFR0_EL1, RAS, V1P1) ||
+		      (kvm_has_feat_enum(kvm, ID_AA64PFR0_EL1, RAS, IMP) &&
+		       kvm_has_feat(kvm, ID_AA64PFR1_EL1, RAS_frac, RASv1p1)))) {
+			kvm_inject_undefined(vcpu);
+			return false;
+		}
+		break;
 	default:
 		if (!kvm_has_feat(kvm, ID_AA64PFR0_EL1, RAS, IMP)) {
 			kvm_inject_undefined(vcpu);
@@ -2929,7 +3081,6 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 		    ~(ID_AA64PFR0_EL1_AMU |
 		      ID_AA64PFR0_EL1_MPAM |
 		      ID_AA64PFR0_EL1_SVE |
-		      ID_AA64PFR0_EL1_RAS |
 		      ID_AA64PFR0_EL1_AdvSIMD |
 		      ID_AA64PFR0_EL1_FP)),
 	ID_FILTERED(ID_AA64PFR1_EL1, id_aa64pfr1_el1,
@@ -2943,7 +3094,6 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 				       ID_AA64PFR1_EL1_SME |
 				       ID_AA64PFR1_EL1_RES0 |
 				       ID_AA64PFR1_EL1_MPAM_frac |
-				       ID_AA64PFR1_EL1_RAS_frac |
 				       ID_AA64PFR1_EL1_MTE)),
 	ID_WRITABLE(ID_AA64PFR2_EL1,
 		    ID_AA64PFR2_EL1_FPMR |
@@ -3063,8 +3213,13 @@ static const struct sys_reg_desc sys_reg_descs[] = {
 	{ SYS_DESC(SYS_ERXCTLR_EL1), access_ras },
 	{ SYS_DESC(SYS_ERXSTATUS_EL1), access_ras },
 	{ SYS_DESC(SYS_ERXADDR_EL1), access_ras },
+	{ SYS_DESC(SYS_ERXPFGF_EL1), access_ras },
+	{ SYS_DESC(SYS_ERXPFGCTL_EL1), access_ras },
+	{ SYS_DESC(SYS_ERXPFGCDN_EL1), access_ras },
 	{ SYS_DESC(SYS_ERXMISC0_EL1), access_ras },
 	{ SYS_DESC(SYS_ERXMISC1_EL1), access_ras },
+	{ SYS_DESC(SYS_ERXMISC2_EL1), access_ras },
+	{ SYS_DESC(SYS_ERXMISC3_EL1), access_ras },
 
 	MTE_REG(TFSR_EL1),
 	MTE_REG(TFSRE0_EL1),
diff --git a/arch/arm64/kvm/vgic/vgic-debug.c b/arch/arm64/kvm/vgic/vgic-debug.c
index 2684f273d9e1..4c1209261b65 100644
--- a/arch/arm64/kvm/vgic/vgic-debug.c
+++ b/arch/arm64/kvm/vgic/vgic-debug.c
@@ -69,7 +69,7 @@ static int iter_mark_lpis(struct kvm *kvm)
 	int nr_lpis = 0;
 
 	xa_for_each(&dist->lpi_xa, intid, irq) {
-		if (!vgic_try_get_irq_kref(irq))
+		if (!vgic_try_get_irq_ref(irq))
 			continue;
 
 		xa_set_mark(&dist->lpi_xa, intid, LPI_XA_MARK_DEBUG_ITER);
diff --git a/arch/arm64/kvm/vgic/vgic-init.c b/arch/arm64/kvm/vgic/vgic-init.c
index 1e680ad6e863..4c3c0d82e476 100644
--- a/arch/arm64/kvm/vgic/vgic-init.c
+++ b/arch/arm64/kvm/vgic/vgic-init.c
@@ -53,7 +53,7 @@ void kvm_vgic_early_init(struct kvm *kvm)
 {
 	struct vgic_dist *dist = &kvm->arch.vgic;
 
-	xa_init_flags(&dist->lpi_xa, XA_FLAGS_LOCK_IRQ);
+	xa_init(&dist->lpi_xa);
 }
 
 /* CREATION */
@@ -208,7 +208,7 @@ static int kvm_vgic_dist_init(struct kvm *kvm, unsigned int nr_spis)
 		raw_spin_lock_init(&irq->irq_lock);
 		irq->vcpu = NULL;
 		irq->target_vcpu = vcpu0;
-		kref_init(&irq->refcount);
+		refcount_set(&irq->refcount, 0);
 		switch (dist->vgic_model) {
 		case KVM_DEV_TYPE_ARM_VGIC_V2:
 			irq->targets = 0;
@@ -277,7 +277,7 @@ static int vgic_allocate_private_irqs_locked(struct kvm_vcpu *vcpu, u32 type)
 		irq->intid = i;
 		irq->vcpu = NULL;
 		irq->target_vcpu = vcpu;
-		kref_init(&irq->refcount);
+		refcount_set(&irq->refcount, 0);
 		if (vgic_irq_is_sgi(i)) {
 			/* SGIs */
 			irq->enabled = 1;
diff --git a/arch/arm64/kvm/vgic/vgic-its.c b/arch/arm64/kvm/vgic/vgic-its.c
index 7368c13f16b7..ce3e3ed3f29f 100644
--- a/arch/arm64/kvm/vgic/vgic-its.c
+++ b/arch/arm64/kvm/vgic/vgic-its.c
@@ -78,7 +78,6 @@ static struct vgic_irq *vgic_add_lpi(struct kvm *kvm, u32 intid,
 {
 	struct vgic_dist *dist = &kvm->arch.vgic;
 	struct vgic_irq *irq = vgic_get_irq(kvm, intid), *oldirq;
-	unsigned long flags;
 	int ret;
 
 	/* In this case there is no put, since we keep the reference. */
@@ -89,7 +88,7 @@ static struct vgic_irq *vgic_add_lpi(struct kvm *kvm, u32 intid,
 	if (!irq)
 		return ERR_PTR(-ENOMEM);
 
-	ret = xa_reserve_irq(&dist->lpi_xa, intid, GFP_KERNEL_ACCOUNT);
+	ret = xa_reserve(&dist->lpi_xa, intid, GFP_KERNEL_ACCOUNT);
 	if (ret) {
 		kfree(irq);
 		return ERR_PTR(ret);
@@ -99,19 +98,19 @@ static struct vgic_irq *vgic_add_lpi(struct kvm *kvm, u32 intid,
 	raw_spin_lock_init(&irq->irq_lock);
 
 	irq->config = VGIC_CONFIG_EDGE;
-	kref_init(&irq->refcount);
+	refcount_set(&irq->refcount, 1);
 	irq->intid = intid;
 	irq->target_vcpu = vcpu;
 	irq->group = 1;
 
-	xa_lock_irqsave(&dist->lpi_xa, flags);
+	xa_lock(&dist->lpi_xa);
 
 	/*
 	 * There could be a race with another vgic_add_lpi(), so we need to
 	 * check that we don't add a second list entry with the same LPI.
 	 */
 	oldirq = xa_load(&dist->lpi_xa, intid);
-	if (vgic_try_get_irq_kref(oldirq)) {
+	if (vgic_try_get_irq_ref(oldirq)) {
 		/* Someone was faster with adding this LPI, lets use that. */
 		kfree(irq);
 		irq = oldirq;
@@ -126,7 +125,7 @@ static struct vgic_irq *vgic_add_lpi(struct kvm *kvm, u32 intid,
 	}
 
 out_unlock:
-	xa_unlock_irqrestore(&dist->lpi_xa, flags);
+	xa_unlock(&dist->lpi_xa);
 
 	if (ret)
 		return ERR_PTR(ret);
@@ -547,7 +546,7 @@ static struct vgic_irq *vgic_its_check_cache(struct kvm *kvm, phys_addr_t db,
 	rcu_read_lock();
 
 	irq = xa_load(&its->translation_cache, cache_key);
-	if (!vgic_try_get_irq_kref(irq))
+	if (!vgic_try_get_irq_ref(irq))
 		irq = NULL;
 
 	rcu_read_unlock();
@@ -571,7 +570,7 @@ static void vgic_its_cache_translation(struct kvm *kvm, struct vgic_its *its,
 	 * its_lock, as the ITE (and the reference it holds) cannot be freed.
 	 */
 	lockdep_assert_held(&its->its_lock);
-	vgic_get_irq_kref(irq);
+	vgic_get_irq_ref(irq);
 
 	old = xa_store(&its->translation_cache, cache_key, irq, GFP_KERNEL_ACCOUNT);
 
diff --git a/arch/arm64/kvm/vgic/vgic-mmio-v3.c b/arch/arm64/kvm/vgic/vgic-mmio-v3.c
index a3ef185209e9..70d50c77e5dc 100644
--- a/arch/arm64/kvm/vgic/vgic-mmio-v3.c
+++ b/arch/arm64/kvm/vgic/vgic-mmio-v3.c
@@ -50,6 +50,14 @@ bool vgic_has_its(struct kvm *kvm)
 
 bool vgic_supports_direct_msis(struct kvm *kvm)
 {
+	/*
+	 * Deliberately conflate vLPI and vSGI support on GICv4.1 hardware,
+	 * indirectly allowing userspace to control whether or not vPEs are
+	 * allocated for the VM.
+	 */
+	if (system_supports_direct_sgis() && !vgic_supports_direct_sgis(kvm))
+		return false;
+
 	return kvm_vgic_global_state.has_gicv4 && vgic_has_its(kvm);
 }
 
diff --git a/arch/arm64/kvm/vgic/vgic-mmio.c b/arch/arm64/kvm/vgic/vgic-mmio.c
index e416e433baff..a573b1f0c6cb 100644
--- a/arch/arm64/kvm/vgic/vgic-mmio.c
+++ b/arch/arm64/kvm/vgic/vgic-mmio.c
@@ -1091,7 +1091,7 @@ int vgic_register_dist_iodev(struct kvm *kvm, gpa_t dist_base_address,
 		len = vgic_v3_init_dist_iodev(io_device);
 		break;
 	default:
-		BUG_ON(1);
+		BUG();
 	}
 
 	io_device->base_addr = dist_base_address;
diff --git a/arch/arm64/kvm/vgic/vgic-v4.c b/arch/arm64/kvm/vgic/vgic-v4.c
index 4d9343d2b0b1..548aec9d5a72 100644
--- a/arch/arm64/kvm/vgic/vgic-v4.c
+++ b/arch/arm64/kvm/vgic/vgic-v4.c
@@ -518,7 +518,7 @@ static struct vgic_irq *__vgic_host_irq_get_vlpi(struct kvm *kvm, int host_irq)
 		if (!irq->hw || irq->host_irq != host_irq)
 			continue;
 
-		if (!vgic_try_get_irq_kref(irq))
+		if (!vgic_try_get_irq_ref(irq))
 			return NULL;
 
 		return irq;
diff --git a/arch/arm64/kvm/vgic/vgic.c b/arch/arm64/kvm/vgic/vgic.c
index f5148b38120a..6dd5a10081e2 100644
--- a/arch/arm64/kvm/vgic/vgic.c
+++ b/arch/arm64/kvm/vgic/vgic.c
@@ -28,8 +28,8 @@ struct vgic_global kvm_vgic_global_state __ro_after_init = {
  *     kvm->arch.config_lock (mutex)
  *       its->cmd_lock (mutex)
  *         its->its_lock (mutex)
- *           vgic_cpu->ap_list_lock		must be taken with IRQs disabled
- *             vgic_dist->lpi_xa.xa_lock	must be taken with IRQs disabled
+ *           vgic_dist->lpi_xa.xa_lock
+ *             vgic_cpu->ap_list_lock		must be taken with IRQs disabled
  *               vgic_irq->irq_lock		must be taken with IRQs disabled
  *
  * As the ap_list_lock might be taken from the timer interrupt handler,
@@ -71,7 +71,7 @@ static struct vgic_irq *vgic_get_lpi(struct kvm *kvm, u32 intid)
 	rcu_read_lock();
 
 	irq = xa_load(&dist->lpi_xa, intid);
-	if (!vgic_try_get_irq_kref(irq))
+	if (!vgic_try_get_irq_ref(irq))
 		irq = NULL;
 
 	rcu_read_unlock();
@@ -114,37 +114,66 @@ struct vgic_irq *vgic_get_vcpu_irq(struct kvm_vcpu *vcpu, u32 intid)
 	return vgic_get_irq(vcpu->kvm, intid);
 }
 
-/*
- * We can't do anything in here, because we lack the kvm pointer to
- * lock and remove the item from the lpi_list. So we keep this function
- * empty and use the return value of kref_put() to trigger the freeing.
- */
-static void vgic_irq_release(struct kref *ref)
+static void vgic_release_lpi_locked(struct vgic_dist *dist, struct vgic_irq *irq)
+{
+	lockdep_assert_held(&dist->lpi_xa.xa_lock);
+	__xa_erase(&dist->lpi_xa, irq->intid);
+	kfree_rcu(irq, rcu);
+}
+
+static __must_check bool __vgic_put_irq(struct kvm *kvm, struct vgic_irq *irq)
+{
+	if (irq->intid < VGIC_MIN_LPI)
+		return false;
+
+	return refcount_dec_and_test(&irq->refcount);
+}
+
+static __must_check bool vgic_put_irq_norelease(struct kvm *kvm, struct vgic_irq *irq)
 {
+	if (!__vgic_put_irq(kvm, irq))
+		return false;
+
+	irq->pending_release = true;
+	return true;
 }
 
 void vgic_put_irq(struct kvm *kvm, struct vgic_irq *irq)
 {
 	struct vgic_dist *dist = &kvm->arch.vgic;
-	unsigned long flags;
 
-	if (irq->intid < VGIC_MIN_LPI)
-		return;
+	if (irq->intid >= VGIC_MIN_LPI)
+		might_lock(&dist->lpi_xa.xa_lock);
 
-	if (!kref_put(&irq->refcount, vgic_irq_release))
+	if (!__vgic_put_irq(kvm, irq))
 		return;
 
-	xa_lock_irqsave(&dist->lpi_xa, flags);
-	__xa_erase(&dist->lpi_xa, irq->intid);
-	xa_unlock_irqrestore(&dist->lpi_xa, flags);
+	xa_lock(&dist->lpi_xa);
+	vgic_release_lpi_locked(dist, irq);
+	xa_unlock(&dist->lpi_xa);
+}
 
-	kfree_rcu(irq, rcu);
+static void vgic_release_deleted_lpis(struct kvm *kvm)
+{
+	struct vgic_dist *dist = &kvm->arch.vgic;
+	unsigned long intid;
+	struct vgic_irq *irq;
+
+	xa_lock(&dist->lpi_xa);
+
+	xa_for_each(&dist->lpi_xa, intid, irq) {
+		if (irq->pending_release)
+			vgic_release_lpi_locked(dist, irq);
+	}
+
+	xa_unlock(&dist->lpi_xa);
 }
 
 void vgic_flush_pending_lpis(struct kvm_vcpu *vcpu)
 {
 	struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
 	struct vgic_irq *irq, *tmp;
+	bool deleted = false;
 	unsigned long flags;
 
 	raw_spin_lock_irqsave(&vgic_cpu->ap_list_lock, flags);
@@ -155,11 +184,14 @@ void vgic_flush_pending_lpis(struct kvm_vcpu *vcpu)
 			list_del(&irq->ap_list);
 			irq->vcpu = NULL;
 			raw_spin_unlock(&irq->irq_lock);
-			vgic_put_irq(vcpu->kvm, irq);
+			deleted |= vgic_put_irq_norelease(vcpu->kvm, irq);
 		}
 	}
 
 	raw_spin_unlock_irqrestore(&vgic_cpu->ap_list_lock, flags);
+
+	if (deleted)
+		vgic_release_deleted_lpis(vcpu->kvm);
 }
 
 void vgic_irq_set_phys_pending(struct vgic_irq *irq, bool pending)
@@ -399,7 +431,7 @@ retry:
 	 * now in the ap_list. This is safe as the caller must already hold a
 	 * reference on the irq.
 	 */
-	vgic_get_irq_kref(irq);
+	vgic_get_irq_ref(irq);
 	list_add_tail(&irq->ap_list, &vcpu->arch.vgic_cpu.ap_list_head);
 	irq->vcpu = vcpu;
 
@@ -630,6 +662,7 @@ static void vgic_prune_ap_list(struct kvm_vcpu *vcpu)
 {
 	struct vgic_cpu *vgic_cpu = &vcpu->arch.vgic_cpu;
 	struct vgic_irq *irq, *tmp;
+	bool deleted_lpis = false;
 
 	DEBUG_SPINLOCK_BUG_ON(!irqs_disabled());
 
@@ -657,12 +690,12 @@ retry:
 
 			/*
 			 * This vgic_put_irq call matches the
-			 * vgic_get_irq_kref in vgic_queue_irq_unlock,
+			 * vgic_get_irq_ref in vgic_queue_irq_unlock,
 			 * where we added the LPI to the ap_list. As
 			 * we remove the irq from the list, we drop
 			 * also drop the refcount.
 			 */
-			vgic_put_irq(vcpu->kvm, irq);
+			deleted_lpis |= vgic_put_irq_norelease(vcpu->kvm, irq);
 			continue;
 		}
 
@@ -725,6 +758,9 @@ retry:
 	}
 
 	raw_spin_unlock(&vgic_cpu->ap_list_lock);
+
+	if (unlikely(deleted_lpis))
+		vgic_release_deleted_lpis(vcpu->kvm);
 }
 
 static inline void vgic_fold_lr_state(struct kvm_vcpu *vcpu)
@@ -818,7 +854,7 @@ static void vgic_flush_lr_state(struct kvm_vcpu *vcpu)
 		 * the AP list has been sorted already.
 		 */
 		if (multi_sgi && irq->priority > prio) {
-			_raw_spin_unlock(&irq->irq_lock);
+			raw_spin_unlock(&irq->irq_lock);
 			break;
 		}
 
diff --git a/arch/arm64/kvm/vgic/vgic.h b/arch/arm64/kvm/vgic/vgic.h
index 1384a04c0784..ac5f9c5d2b98 100644
--- a/arch/arm64/kvm/vgic/vgic.h
+++ b/arch/arm64/kvm/vgic/vgic.h
@@ -267,7 +267,7 @@ void vgic_v2_put(struct kvm_vcpu *vcpu);
 void vgic_v2_save_state(struct kvm_vcpu *vcpu);
 void vgic_v2_restore_state(struct kvm_vcpu *vcpu);
 
-static inline bool vgic_try_get_irq_kref(struct vgic_irq *irq)
+static inline bool vgic_try_get_irq_ref(struct vgic_irq *irq)
 {
 	if (!irq)
 		return false;
@@ -275,12 +275,12 @@ static inline bool vgic_try_get_irq_kref(struct vgic_irq *irq)
 	if (irq->intid < VGIC_MIN_LPI)
 		return true;
 
-	return kref_get_unless_zero(&irq->refcount);
+	return refcount_inc_not_zero(&irq->refcount);
 }
 
-static inline void vgic_get_irq_kref(struct vgic_irq *irq)
+static inline void vgic_get_irq_ref(struct vgic_irq *irq)
 {
-	WARN_ON_ONCE(!vgic_try_get_irq_kref(irq));
+	WARN_ON_ONCE(!vgic_try_get_irq_ref(irq));
 }
 
 void vgic_v3_fold_lr_state(struct kvm_vcpu *vcpu);
@@ -396,15 +396,7 @@ bool vgic_supports_direct_sgis(struct kvm *kvm);
 
 static inline bool vgic_supports_direct_irqs(struct kvm *kvm)
 {
-	/*
-	 * Deliberately conflate vLPI and vSGI support on GICv4.1 hardware,
-	 * indirectly allowing userspace to control whether or not vPEs are
-	 * allocated for the VM.
-	 */
-	if (system_supports_direct_sgis())
-		return vgic_supports_direct_sgis(kvm);
-
-	return vgic_supports_direct_msis(kvm);
+	return vgic_supports_direct_msis(kvm) || vgic_supports_direct_sgis(kvm);
 }
 
 int vgic_v4_init(struct kvm *kvm);
diff --git a/arch/arm64/mm/init.c b/arch/arm64/mm/init.c
index ea84a61ed508..524d34a0e921 100644
--- a/arch/arm64/mm/init.c
+++ b/arch/arm64/mm/init.c
@@ -243,7 +243,7 @@ void __init arm64_memblock_init(void)
 	 */
 	if (memory_limit != PHYS_ADDR_MAX) {
 		memblock_mem_limit_remove_map(memory_limit);
-		memblock_add(__pa_symbol(_text), (u64)(_end - _text));
+		memblock_add(__pa_symbol(_text), (resource_size_t)(_end - _text));
 	}
 
 	if (IS_ENABLED(CONFIG_BLK_DEV_INITRD) && phys_initrd_size) {
@@ -252,8 +252,8 @@ void __init arm64_memblock_init(void)
 		 * initrd to become inaccessible via the linear mapping.
 		 * Otherwise, this is a no-op
 		 */
-		u64 base = phys_initrd_start & PAGE_MASK;
-		u64 size = PAGE_ALIGN(phys_initrd_start + phys_initrd_size) - base;
+		phys_addr_t base = phys_initrd_start & PAGE_MASK;
+		resource_size_t size = PAGE_ALIGN(phys_initrd_start + phys_initrd_size) - base;
 
 		/*
 		 * We can only add back the initrd memory if we don't end up
@@ -279,7 +279,7 @@ void __init arm64_memblock_init(void)
 	 * Register the kernel text, kernel data, initrd, and initial
 	 * pagetables with memblock.
 	 */
-	memblock_reserve(__pa_symbol(_stext), _end - _stext);
+	memblock_reserve(__pa_symbol(_text), _end - _text);
 	if (IS_ENABLED(CONFIG_BLK_DEV_INITRD) && phys_initrd_size) {
 		/* the generic initrd code expects virtual addresses */
 		initrd_start = __phys_to_virt(phys_initrd_start);
diff --git a/arch/arm64/mm/mmu.c b/arch/arm64/mm/mmu.c
index 34e5d78af076..3a444a5fe469 100644
--- a/arch/arm64/mm/mmu.c
+++ b/arch/arm64/mm/mmu.c
@@ -27,6 +27,8 @@
 #include <linux/kfence.h>
 #include <linux/pkeys.h>
 #include <linux/mm_inline.h>
+#include <linux/pagewalk.h>
+#include <linux/stop_machine.h>
 
 #include <asm/barrier.h>
 #include <asm/cputype.h>
@@ -47,12 +49,7 @@
 #define NO_CONT_MAPPINGS	BIT(1)
 #define NO_EXEC_MAPPINGS	BIT(2)	/* assumes FEAT_HPDS is not used */
 
-enum pgtable_type {
-	TABLE_PTE,
-	TABLE_PMD,
-	TABLE_PUD,
-	TABLE_P4D,
-};
+DEFINE_STATIC_KEY_FALSE(arm64_ptdump_lock_key);
 
 u64 kimage_voffset __ro_after_init;
 EXPORT_SYMBOL(kimage_voffset);
@@ -481,14 +478,18 @@ void create_kpti_ng_temp_pgd(pgd_t *pgdir, phys_addr_t phys, unsigned long virt,
 			     int flags);
 #endif
 
-static phys_addr_t __pgd_pgtable_alloc(struct mm_struct *mm,
+#define INVALID_PHYS_ADDR	(-1ULL)
+
+static phys_addr_t __pgd_pgtable_alloc(struct mm_struct *mm, gfp_t gfp,
 				       enum pgtable_type pgtable_type)
 {
 	/* Page is zeroed by init_clear_pgtable() so don't duplicate effort. */
-	struct ptdesc *ptdesc = pagetable_alloc(GFP_PGTABLE_KERNEL & ~__GFP_ZERO, 0);
+	struct ptdesc *ptdesc = pagetable_alloc(gfp & ~__GFP_ZERO, 0);
 	phys_addr_t pa;
 
-	BUG_ON(!ptdesc);
+	if (!ptdesc)
+		return INVALID_PHYS_ADDR;
+
 	pa = page_to_phys(ptdesc_page(ptdesc));
 
 	switch (pgtable_type) {
@@ -509,16 +510,392 @@ static phys_addr_t __pgd_pgtable_alloc(struct mm_struct *mm,
 	return pa;
 }
 
+static phys_addr_t
+try_pgd_pgtable_alloc_init_mm(enum pgtable_type pgtable_type, gfp_t gfp)
+{
+	return __pgd_pgtable_alloc(&init_mm, gfp, pgtable_type);
+}
+
 static phys_addr_t __maybe_unused
 pgd_pgtable_alloc_init_mm(enum pgtable_type pgtable_type)
 {
-	return __pgd_pgtable_alloc(&init_mm, pgtable_type);
+	phys_addr_t pa;
+
+	pa = __pgd_pgtable_alloc(&init_mm, GFP_PGTABLE_KERNEL, pgtable_type);
+	BUG_ON(pa == INVALID_PHYS_ADDR);
+	return pa;
 }
 
 static phys_addr_t
 pgd_pgtable_alloc_special_mm(enum pgtable_type pgtable_type)
 {
-	return __pgd_pgtable_alloc(NULL, pgtable_type);
+	phys_addr_t pa;
+
+	pa = __pgd_pgtable_alloc(NULL, GFP_PGTABLE_KERNEL, pgtable_type);
+	BUG_ON(pa == INVALID_PHYS_ADDR);
+	return pa;
+}
+
+static void split_contpte(pte_t *ptep)
+{
+	int i;
+
+	ptep = PTR_ALIGN_DOWN(ptep, sizeof(*ptep) * CONT_PTES);
+	for (i = 0; i < CONT_PTES; i++, ptep++)
+		__set_pte(ptep, pte_mknoncont(__ptep_get(ptep)));
+}
+
+static int split_pmd(pmd_t *pmdp, pmd_t pmd, gfp_t gfp, bool to_cont)
+{
+	pmdval_t tableprot = PMD_TYPE_TABLE | PMD_TABLE_UXN | PMD_TABLE_AF;
+	unsigned long pfn = pmd_pfn(pmd);
+	pgprot_t prot = pmd_pgprot(pmd);
+	phys_addr_t pte_phys;
+	pte_t *ptep;
+	int i;
+
+	pte_phys = try_pgd_pgtable_alloc_init_mm(TABLE_PTE, gfp);
+	if (pte_phys == INVALID_PHYS_ADDR)
+		return -ENOMEM;
+	ptep = (pte_t *)phys_to_virt(pte_phys);
+
+	if (pgprot_val(prot) & PMD_SECT_PXN)
+		tableprot |= PMD_TABLE_PXN;
+
+	prot = __pgprot((pgprot_val(prot) & ~PTE_TYPE_MASK) | PTE_TYPE_PAGE);
+	prot = __pgprot(pgprot_val(prot) & ~PTE_CONT);
+	if (to_cont)
+		prot = __pgprot(pgprot_val(prot) | PTE_CONT);
+
+	for (i = 0; i < PTRS_PER_PTE; i++, ptep++, pfn++)
+		__set_pte(ptep, pfn_pte(pfn, prot));
+
+	/*
+	 * Ensure the pte entries are visible to the table walker by the time
+	 * the pmd entry that points to the ptes is visible.
+	 */
+	dsb(ishst);
+	__pmd_populate(pmdp, pte_phys, tableprot);
+
+	return 0;
+}
+
+static void split_contpmd(pmd_t *pmdp)
+{
+	int i;
+
+	pmdp = PTR_ALIGN_DOWN(pmdp, sizeof(*pmdp) * CONT_PMDS);
+	for (i = 0; i < CONT_PMDS; i++, pmdp++)
+		set_pmd(pmdp, pmd_mknoncont(pmdp_get(pmdp)));
+}
+
+static int split_pud(pud_t *pudp, pud_t pud, gfp_t gfp, bool to_cont)
+{
+	pudval_t tableprot = PUD_TYPE_TABLE | PUD_TABLE_UXN | PUD_TABLE_AF;
+	unsigned int step = PMD_SIZE >> PAGE_SHIFT;
+	unsigned long pfn = pud_pfn(pud);
+	pgprot_t prot = pud_pgprot(pud);
+	phys_addr_t pmd_phys;
+	pmd_t *pmdp;
+	int i;
+
+	pmd_phys = try_pgd_pgtable_alloc_init_mm(TABLE_PMD, gfp);
+	if (pmd_phys == INVALID_PHYS_ADDR)
+		return -ENOMEM;
+	pmdp = (pmd_t *)phys_to_virt(pmd_phys);
+
+	if (pgprot_val(prot) & PMD_SECT_PXN)
+		tableprot |= PUD_TABLE_PXN;
+
+	prot = __pgprot((pgprot_val(prot) & ~PMD_TYPE_MASK) | PMD_TYPE_SECT);
+	prot = __pgprot(pgprot_val(prot) & ~PTE_CONT);
+	if (to_cont)
+		prot = __pgprot(pgprot_val(prot) | PTE_CONT);
+
+	for (i = 0; i < PTRS_PER_PMD; i++, pmdp++, pfn += step)
+		set_pmd(pmdp, pfn_pmd(pfn, prot));
+
+	/*
+	 * Ensure the pmd entries are visible to the table walker by the time
+	 * the pud entry that points to the pmds is visible.
+	 */
+	dsb(ishst);
+	__pud_populate(pudp, pmd_phys, tableprot);
+
+	return 0;
+}
+
+static int split_kernel_leaf_mapping_locked(unsigned long addr)
+{
+	pgd_t *pgdp, pgd;
+	p4d_t *p4dp, p4d;
+	pud_t *pudp, pud;
+	pmd_t *pmdp, pmd;
+	pte_t *ptep, pte;
+	int ret = 0;
+
+	/*
+	 * PGD: If addr is PGD aligned then addr already describes a leaf
+	 * boundary. If not present then there is nothing to split.
+	 */
+	if (ALIGN_DOWN(addr, PGDIR_SIZE) == addr)
+		goto out;
+	pgdp = pgd_offset_k(addr);
+	pgd = pgdp_get(pgdp);
+	if (!pgd_present(pgd))
+		goto out;
+
+	/*
+	 * P4D: If addr is P4D aligned then addr already describes a leaf
+	 * boundary. If not present then there is nothing to split.
+	 */
+	if (ALIGN_DOWN(addr, P4D_SIZE) == addr)
+		goto out;
+	p4dp = p4d_offset(pgdp, addr);
+	p4d = p4dp_get(p4dp);
+	if (!p4d_present(p4d))
+		goto out;
+
+	/*
+	 * PUD: If addr is PUD aligned then addr already describes a leaf
+	 * boundary. If not present then there is nothing to split. Otherwise,
+	 * if we have a pud leaf, split to contpmd.
+	 */
+	if (ALIGN_DOWN(addr, PUD_SIZE) == addr)
+		goto out;
+	pudp = pud_offset(p4dp, addr);
+	pud = pudp_get(pudp);
+	if (!pud_present(pud))
+		goto out;
+	if (pud_leaf(pud)) {
+		ret = split_pud(pudp, pud, GFP_PGTABLE_KERNEL, true);
+		if (ret)
+			goto out;
+	}
+
+	/*
+	 * CONTPMD: If addr is CONTPMD aligned then addr already describes a
+	 * leaf boundary. If not present then there is nothing to split.
+	 * Otherwise, if we have a contpmd leaf, split to pmd.
+	 */
+	if (ALIGN_DOWN(addr, CONT_PMD_SIZE) == addr)
+		goto out;
+	pmdp = pmd_offset(pudp, addr);
+	pmd = pmdp_get(pmdp);
+	if (!pmd_present(pmd))
+		goto out;
+	if (pmd_leaf(pmd)) {
+		if (pmd_cont(pmd))
+			split_contpmd(pmdp);
+		/*
+		 * PMD: If addr is PMD aligned then addr already describes a
+		 * leaf boundary. Otherwise, split to contpte.
+		 */
+		if (ALIGN_DOWN(addr, PMD_SIZE) == addr)
+			goto out;
+		ret = split_pmd(pmdp, pmd, GFP_PGTABLE_KERNEL, true);
+		if (ret)
+			goto out;
+	}
+
+	/*
+	 * CONTPTE: If addr is CONTPTE aligned then addr already describes a
+	 * leaf boundary. If not present then there is nothing to split.
+	 * Otherwise, if we have a contpte leaf, split to pte.
+	 */
+	if (ALIGN_DOWN(addr, CONT_PTE_SIZE) == addr)
+		goto out;
+	ptep = pte_offset_kernel(pmdp, addr);
+	pte = __ptep_get(ptep);
+	if (!pte_present(pte))
+		goto out;
+	if (pte_cont(pte))
+		split_contpte(ptep);
+
+out:
+	return ret;
+}
+
+static DEFINE_MUTEX(pgtable_split_lock);
+
+int split_kernel_leaf_mapping(unsigned long start, unsigned long end)
+{
+	int ret;
+
+	/*
+	 * !BBML2_NOABORT systems should not be trying to change permissions on
+	 * anything that is not pte-mapped in the first place. Just return early
+	 * and let the permission change code raise a warning if not already
+	 * pte-mapped.
+	 */
+	if (!system_supports_bbml2_noabort())
+		return 0;
+
+	/*
+	 * Ensure start and end are at least page-aligned since this is the
+	 * finest granularity we can split to.
+	 */
+	if (start != PAGE_ALIGN(start) || end != PAGE_ALIGN(end))
+		return -EINVAL;
+
+	mutex_lock(&pgtable_split_lock);
+	arch_enter_lazy_mmu_mode();
+
+	/*
+	 * The split_kernel_leaf_mapping_locked() may sleep, it is not a
+	 * problem for ARM64 since ARM64's lazy MMU implementation allows
+	 * sleeping.
+	 *
+	 * Optimize for the common case of splitting out a single page from a
+	 * larger mapping. Here we can just split on the "least aligned" of
+	 * start and end and this will guarantee that there must also be a split
+	 * on the more aligned address since the both addresses must be in the
+	 * same contpte block and it must have been split to ptes.
+	 */
+	if (end - start == PAGE_SIZE) {
+		start = __ffs(start) < __ffs(end) ? start : end;
+		ret = split_kernel_leaf_mapping_locked(start);
+	} else {
+		ret = split_kernel_leaf_mapping_locked(start);
+		if (!ret)
+			ret = split_kernel_leaf_mapping_locked(end);
+	}
+
+	arch_leave_lazy_mmu_mode();
+	mutex_unlock(&pgtable_split_lock);
+	return ret;
+}
+
+static int __init split_to_ptes_pud_entry(pud_t *pudp, unsigned long addr,
+					  unsigned long next,
+					  struct mm_walk *walk)
+{
+	pud_t pud = pudp_get(pudp);
+	int ret = 0;
+
+	if (pud_leaf(pud))
+		ret = split_pud(pudp, pud, GFP_ATOMIC, false);
+
+	return ret;
+}
+
+static int __init split_to_ptes_pmd_entry(pmd_t *pmdp, unsigned long addr,
+					  unsigned long next,
+					  struct mm_walk *walk)
+{
+	pmd_t pmd = pmdp_get(pmdp);
+	int ret = 0;
+
+	if (pmd_leaf(pmd)) {
+		if (pmd_cont(pmd))
+			split_contpmd(pmdp);
+		ret = split_pmd(pmdp, pmd, GFP_ATOMIC, false);
+
+		/*
+		 * We have split the pmd directly to ptes so there is no need to
+		 * visit each pte to check if they are contpte.
+		 */
+		walk->action = ACTION_CONTINUE;
+	}
+
+	return ret;
+}
+
+static int __init split_to_ptes_pte_entry(pte_t *ptep, unsigned long addr,
+					  unsigned long next,
+					  struct mm_walk *walk)
+{
+	pte_t pte = __ptep_get(ptep);
+
+	if (pte_cont(pte))
+		split_contpte(ptep);
+
+	return 0;
+}
+
+static const struct mm_walk_ops split_to_ptes_ops __initconst = {
+	.pud_entry	= split_to_ptes_pud_entry,
+	.pmd_entry	= split_to_ptes_pmd_entry,
+	.pte_entry	= split_to_ptes_pte_entry,
+};
+
+static bool linear_map_requires_bbml2 __initdata;
+
+u32 idmap_kpti_bbml2_flag;
+
+void __init init_idmap_kpti_bbml2_flag(void)
+{
+	WRITE_ONCE(idmap_kpti_bbml2_flag, 1);
+	/* Must be visible to other CPUs before stop_machine() is called. */
+	smp_mb();
+}
+
+static int __init linear_map_split_to_ptes(void *__unused)
+{
+	/*
+	 * Repainting the linear map must be done by CPU0 (the boot CPU) because
+	 * that's the only CPU that we know supports BBML2. The other CPUs will
+	 * be held in a waiting area with the idmap active.
+	 */
+	if (!smp_processor_id()) {
+		unsigned long lstart = _PAGE_OFFSET(vabits_actual);
+		unsigned long lend = PAGE_END;
+		unsigned long kstart = (unsigned long)lm_alias(_stext);
+		unsigned long kend = (unsigned long)lm_alias(__init_begin);
+		int ret;
+
+		/*
+		 * Wait for all secondary CPUs to be put into the waiting area.
+		 */
+		smp_cond_load_acquire(&idmap_kpti_bbml2_flag, VAL == num_online_cpus());
+
+		/*
+		 * Walk all of the linear map [lstart, lend), except the kernel
+		 * linear map alias [kstart, kend), and split all mappings to
+		 * PTE. The kernel alias remains static throughout runtime so
+		 * can continue to be safely mapped with large mappings.
+		 */
+		ret = walk_kernel_page_table_range_lockless(lstart, kstart,
+						&split_to_ptes_ops, NULL, NULL);
+		if (!ret)
+			ret = walk_kernel_page_table_range_lockless(kend, lend,
+						&split_to_ptes_ops, NULL, NULL);
+		if (ret)
+			panic("Failed to split linear map\n");
+		flush_tlb_kernel_range(lstart, lend);
+
+		/*
+		 * Relies on dsb in flush_tlb_kernel_range() to avoid reordering
+		 * before any page table split operations.
+		 */
+		WRITE_ONCE(idmap_kpti_bbml2_flag, 0);
+	} else {
+		typedef void (wait_split_fn)(void);
+		extern wait_split_fn wait_linear_map_split_to_ptes;
+		wait_split_fn *wait_fn;
+
+		wait_fn = (void *)__pa_symbol(wait_linear_map_split_to_ptes);
+
+		/*
+		 * At least one secondary CPU doesn't support BBML2 so cannot
+		 * tolerate the size of the live mappings changing. So have the
+		 * secondary CPUs wait for the boot CPU to make the changes
+		 * with the idmap active and init_mm inactive.
+		 */
+		cpu_install_idmap();
+		wait_fn();
+		cpu_uninstall_idmap();
+	}
+
+	return 0;
+}
+
+void __init linear_map_maybe_split_to_ptes(void)
+{
+	if (linear_map_requires_bbml2 && !system_supports_bbml2_noabort()) {
+		init_idmap_kpti_bbml2_flag();
+		stop_machine(linear_map_split_to_ptes, NULL, cpu_online_mask);
+	}
 }
 
 /*
@@ -581,8 +958,8 @@ void __init mark_linear_text_alias_ro(void)
 	/*
 	 * Remove the write permissions from the linear alias of .text/.rodata
 	 */
-	update_mapping_prot(__pa_symbol(_stext), (unsigned long)lm_alias(_stext),
-			    (unsigned long)__init_begin - (unsigned long)_stext,
+	update_mapping_prot(__pa_symbol(_text), (unsigned long)lm_alias(_text),
+			    (unsigned long)__init_begin - (unsigned long)_text,
 			    PAGE_KERNEL_RO);
 }
 
@@ -640,10 +1017,20 @@ static inline void arm64_kfence_map_pool(phys_addr_t kfence_pool, pgd_t *pgdp) {
 
 #endif /* CONFIG_KFENCE */
 
+static inline bool force_pte_mapping(void)
+{
+	bool bbml2 = system_capabilities_finalized() ?
+		system_supports_bbml2_noabort() : cpu_supports_bbml2_noabort();
+
+	return (!bbml2 && (rodata_full || arm64_kfence_can_set_direct_map() ||
+			   is_realm_world())) ||
+		debug_pagealloc_enabled();
+}
+
 static void __init map_mem(pgd_t *pgdp)
 {
 	static const u64 direct_map_end = _PAGE_END(VA_BITS_MIN);
-	phys_addr_t kernel_start = __pa_symbol(_stext);
+	phys_addr_t kernel_start = __pa_symbol(_text);
 	phys_addr_t kernel_end = __pa_symbol(__init_begin);
 	phys_addr_t start, end;
 	phys_addr_t early_kfence_pool;
@@ -665,7 +1052,9 @@ static void __init map_mem(pgd_t *pgdp)
 
 	early_kfence_pool = arm64_kfence_alloc_pool();
 
-	if (can_set_direct_map())
+	linear_map_requires_bbml2 = !force_pte_mapping() && can_set_direct_map();
+
+	if (force_pte_mapping())
 		flags |= NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS;
 
 	/*
@@ -690,7 +1079,7 @@ static void __init map_mem(pgd_t *pgdp)
 	}
 
 	/*
-	 * Map the linear alias of the [_stext, __init_begin) interval
+	 * Map the linear alias of the [_text, __init_begin) interval
 	 * as non-executable now, and remove the write permission in
 	 * mark_linear_text_alias_ro() below (which will be called after
 	 * alternative patching has completed). This makes the contents
@@ -717,6 +1106,10 @@ void mark_rodata_ro(void)
 	WRITE_ONCE(rodata_is_rw, false);
 	update_mapping_prot(__pa_symbol(__start_rodata), (unsigned long)__start_rodata,
 			    section_size, PAGE_KERNEL_RO);
+	/* mark the range between _text and _stext as read only. */
+	update_mapping_prot(__pa_symbol(_text), (unsigned long)_text,
+			    (unsigned long)_stext - (unsigned long)_text,
+			    PAGE_KERNEL_RO);
 }
 
 static void __init declare_vma(struct vm_struct *vma,
@@ -787,38 +1180,41 @@ static void __init declare_kernel_vmas(void)
 {
 	static struct vm_struct vmlinux_seg[KERNEL_SEGMENT_COUNT];
 
-	declare_vma(&vmlinux_seg[0], _stext, _etext, VM_NO_GUARD);
+	declare_vma(&vmlinux_seg[0], _text, _etext, VM_NO_GUARD);
 	declare_vma(&vmlinux_seg[1], __start_rodata, __inittext_begin, VM_NO_GUARD);
 	declare_vma(&vmlinux_seg[2], __inittext_begin, __inittext_end, VM_NO_GUARD);
 	declare_vma(&vmlinux_seg[3], __initdata_begin, __initdata_end, VM_NO_GUARD);
 	declare_vma(&vmlinux_seg[4], _data, _end, 0);
 }
 
-void __pi_map_range(u64 *pgd, u64 start, u64 end, u64 pa, pgprot_t prot,
-		    int level, pte_t *tbl, bool may_use_cont, u64 va_offset);
+void __pi_map_range(phys_addr_t *pte, u64 start, u64 end, phys_addr_t pa,
+		    pgprot_t prot, int level, pte_t *tbl, bool may_use_cont,
+		    u64 va_offset);
 
 static u8 idmap_ptes[IDMAP_LEVELS - 1][PAGE_SIZE] __aligned(PAGE_SIZE) __ro_after_init,
-	  kpti_ptes[IDMAP_LEVELS - 1][PAGE_SIZE] __aligned(PAGE_SIZE) __ro_after_init;
+	  kpti_bbml2_ptes[IDMAP_LEVELS - 1][PAGE_SIZE] __aligned(PAGE_SIZE) __ro_after_init;
 
 static void __init create_idmap(void)
 {
-	u64 start = __pa_symbol(__idmap_text_start);
-	u64 end   = __pa_symbol(__idmap_text_end);
-	u64 ptep  = __pa_symbol(idmap_ptes);
+	phys_addr_t start = __pa_symbol(__idmap_text_start);
+	phys_addr_t end   = __pa_symbol(__idmap_text_end);
+	phys_addr_t ptep  = __pa_symbol(idmap_ptes);
 
 	__pi_map_range(&ptep, start, end, start, PAGE_KERNEL_ROX,
 		       IDMAP_ROOT_LEVEL, (pte_t *)idmap_pg_dir, false,
 		       __phys_to_virt(ptep) - ptep);
 
-	if (IS_ENABLED(CONFIG_UNMAP_KERNEL_AT_EL0) && !arm64_use_ng_mappings) {
-		extern u32 __idmap_kpti_flag;
-		u64 pa = __pa_symbol(&__idmap_kpti_flag);
+	if (linear_map_requires_bbml2 ||
+	    (IS_ENABLED(CONFIG_UNMAP_KERNEL_AT_EL0) && !arm64_use_ng_mappings)) {
+		phys_addr_t pa = __pa_symbol(&idmap_kpti_bbml2_flag);
 
 		/*
 		 * The KPTI G-to-nG conversion code needs a read-write mapping
-		 * of its synchronization flag in the ID map.
+		 * of its synchronization flag in the ID map. This is also used
+		 * when splitting the linear map to ptes if a secondary CPU
+		 * doesn't support bbml2.
 		 */
-		ptep = __pa_symbol(kpti_ptes);
+		ptep = __pa_symbol(kpti_bbml2_ptes);
 		__pi_map_range(&ptep, pa, pa + sizeof(u32), pa, PAGE_KERNEL,
 			       IDMAP_ROOT_LEVEL, (pte_t *)idmap_pg_dir, false,
 			       __phys_to_virt(ptep) - ptep);
@@ -1268,7 +1664,8 @@ int pmd_clear_huge(pmd_t *pmdp)
 	return 1;
 }
 
-int pmd_free_pte_page(pmd_t *pmdp, unsigned long addr)
+static int __pmd_free_pte_page(pmd_t *pmdp, unsigned long addr,
+			       bool acquire_mmap_lock)
 {
 	pte_t *table;
 	pmd_t pmd;
@@ -1280,13 +1677,25 @@ int pmd_free_pte_page(pmd_t *pmdp, unsigned long addr)
 		return 1;
 	}
 
+	/* See comment in pud_free_pmd_page for static key logic */
 	table = pte_offset_kernel(pmdp, addr);
 	pmd_clear(pmdp);
 	__flush_tlb_kernel_pgtable(addr);
+	if (static_branch_unlikely(&arm64_ptdump_lock_key) && acquire_mmap_lock) {
+		mmap_read_lock(&init_mm);
+		mmap_read_unlock(&init_mm);
+	}
+
 	pte_free_kernel(NULL, table);
 	return 1;
 }
 
+int pmd_free_pte_page(pmd_t *pmdp, unsigned long addr)
+{
+	/* If ptdump is walking the pagetables, acquire init_mm.mmap_lock */
+	return __pmd_free_pte_page(pmdp, addr, /* acquire_mmap_lock = */ true);
+}
+
 int pud_free_pmd_page(pud_t *pudp, unsigned long addr)
 {
 	pmd_t *table;
@@ -1302,16 +1711,36 @@ int pud_free_pmd_page(pud_t *pudp, unsigned long addr)
 	}
 
 	table = pmd_offset(pudp, addr);
+
+	/*
+	 * Our objective is to prevent ptdump from reading a PMD table which has
+	 * been freed. In this race, if pud_free_pmd_page observes the key on
+	 * (which got flipped by ptdump) then the mmap lock sequence here will,
+	 * as a result of the mmap write lock/unlock sequence in ptdump, give
+	 * us the correct synchronization. If not, this means that ptdump has
+	 * yet not started walking the pagetables - the sequence of barriers
+	 * issued by __flush_tlb_kernel_pgtable() guarantees that ptdump will
+	 * observe an empty PUD.
+	 */
+	pud_clear(pudp);
+	__flush_tlb_kernel_pgtable(addr);
+	if (static_branch_unlikely(&arm64_ptdump_lock_key)) {
+		mmap_read_lock(&init_mm);
+		mmap_read_unlock(&init_mm);
+	}
+
 	pmdp = table;
 	next = addr;
 	end = addr + PUD_SIZE;
 	do {
 		if (pmd_present(pmdp_get(pmdp)))
-			pmd_free_pte_page(pmdp, next);
+			/*
+			 * PMD has been isolated, so ptdump won't see it. No
+			 * need to acquire init_mm.mmap_lock.
+			 */
+			__pmd_free_pte_page(pmdp, next, /* acquire_mmap_lock = */ false);
 	} while (pmdp++, next += PMD_SIZE, next != end);
 
-	pud_clear(pudp);
-	__flush_tlb_kernel_pgtable(addr);
 	pmd_free(NULL, table);
 	return 1;
 }
@@ -1331,8 +1760,8 @@ static void __remove_pgd_mapping(pgd_t *pgdir, unsigned long start, u64 size)
 struct range arch_get_mappable_range(void)
 {
 	struct range mhp_range;
-	u64 start_linear_pa = __pa(_PAGE_OFFSET(vabits_actual));
-	u64 end_linear_pa = __pa(PAGE_END - 1);
+	phys_addr_t start_linear_pa = __pa(_PAGE_OFFSET(vabits_actual));
+	phys_addr_t end_linear_pa = __pa(PAGE_END - 1);
 
 	if (IS_ENABLED(CONFIG_RANDOMIZE_BASE)) {
 		/*
@@ -1367,7 +1796,7 @@ int arch_add_memory(int nid, u64 start, u64 size,
 
 	VM_BUG_ON(!mhp_range_allowed(start, size, true));
 
-	if (can_set_direct_map())
+	if (force_pte_mapping())
 		flags |= NO_BLOCK_MAPPINGS | NO_CONT_MAPPINGS;
 
 	__create_pgd_mapping(swapper_pg_dir, start, __phys_to_virt(start),
diff --git a/arch/arm64/mm/pageattr.c b/arch/arm64/mm/pageattr.c
index 04d4a8f676db..5135f2d66958 100644
--- a/arch/arm64/mm/pageattr.c
+++ b/arch/arm64/mm/pageattr.c
@@ -8,6 +8,7 @@
 #include <linux/mem_encrypt.h>
 #include <linux/sched.h>
 #include <linux/vmalloc.h>
+#include <linux/pagewalk.h>
 
 #include <asm/cacheflush.h>
 #include <asm/pgtable-prot.h>
@@ -20,7 +21,66 @@ struct page_change_data {
 	pgprot_t clear_mask;
 };
 
-bool rodata_full __ro_after_init = IS_ENABLED(CONFIG_RODATA_FULL_DEFAULT_ENABLED);
+static ptdesc_t set_pageattr_masks(ptdesc_t val, struct mm_walk *walk)
+{
+	struct page_change_data *masks = walk->private;
+
+	val &= ~(pgprot_val(masks->clear_mask));
+	val |= (pgprot_val(masks->set_mask));
+
+	return val;
+}
+
+static int pageattr_pud_entry(pud_t *pud, unsigned long addr,
+			      unsigned long next, struct mm_walk *walk)
+{
+	pud_t val = pudp_get(pud);
+
+	if (pud_sect(val)) {
+		if (WARN_ON_ONCE((next - addr) != PUD_SIZE))
+			return -EINVAL;
+		val = __pud(set_pageattr_masks(pud_val(val), walk));
+		set_pud(pud, val);
+		walk->action = ACTION_CONTINUE;
+	}
+
+	return 0;
+}
+
+static int pageattr_pmd_entry(pmd_t *pmd, unsigned long addr,
+			      unsigned long next, struct mm_walk *walk)
+{
+	pmd_t val = pmdp_get(pmd);
+
+	if (pmd_sect(val)) {
+		if (WARN_ON_ONCE((next - addr) != PMD_SIZE))
+			return -EINVAL;
+		val = __pmd(set_pageattr_masks(pmd_val(val), walk));
+		set_pmd(pmd, val);
+		walk->action = ACTION_CONTINUE;
+	}
+
+	return 0;
+}
+
+static int pageattr_pte_entry(pte_t *pte, unsigned long addr,
+			      unsigned long next, struct mm_walk *walk)
+{
+	pte_t val = __ptep_get(pte);
+
+	val = __pte(set_pageattr_masks(pte_val(val), walk));
+	__set_pte(pte, val);
+
+	return 0;
+}
+
+static const struct mm_walk_ops pageattr_ops = {
+	.pud_entry	= pageattr_pud_entry,
+	.pmd_entry	= pageattr_pmd_entry,
+	.pte_entry	= pageattr_pte_entry,
+};
+
+bool rodata_full __ro_after_init = true;
 
 bool can_set_direct_map(void)
 {
@@ -37,32 +97,39 @@ bool can_set_direct_map(void)
 		arm64_kfence_can_set_direct_map() || is_realm_world();
 }
 
-static int change_page_range(pte_t *ptep, unsigned long addr, void *data)
+static int update_range_prot(unsigned long start, unsigned long size,
+			     pgprot_t set_mask, pgprot_t clear_mask)
 {
-	struct page_change_data *cdata = data;
-	pte_t pte = __ptep_get(ptep);
+	struct page_change_data data;
+	int ret;
 
-	pte = clear_pte_bit(pte, cdata->clear_mask);
-	pte = set_pte_bit(pte, cdata->set_mask);
+	data.set_mask = set_mask;
+	data.clear_mask = clear_mask;
 
-	__set_pte(ptep, pte);
-	return 0;
+	ret = split_kernel_leaf_mapping(start, start + size);
+	if (WARN_ON_ONCE(ret))
+		return ret;
+
+	arch_enter_lazy_mmu_mode();
+
+	/*
+	 * The caller must ensure that the range we are operating on does not
+	 * partially overlap a block mapping, or a cont mapping. Any such case
+	 * must be eliminated by splitting the mapping.
+	 */
+	ret = walk_kernel_page_table_range_lockless(start, start + size,
+						    &pageattr_ops, NULL, &data);
+	arch_leave_lazy_mmu_mode();
+
+	return ret;
 }
 
-/*
- * This function assumes that the range is mapped with PAGE_SIZE pages.
- */
 static int __change_memory_common(unsigned long start, unsigned long size,
-				pgprot_t set_mask, pgprot_t clear_mask)
+				  pgprot_t set_mask, pgprot_t clear_mask)
 {
-	struct page_change_data data;
 	int ret;
 
-	data.set_mask = set_mask;
-	data.clear_mask = clear_mask;
-
-	ret = apply_to_page_range(&init_mm, start, size, change_page_range,
-					&data);
+	ret = update_range_prot(start, size, set_mask, clear_mask);
 
 	/*
 	 * If the memory is being made valid without changing any other bits
@@ -174,32 +241,26 @@ int set_memory_valid(unsigned long addr, int numpages, int enable)
 
 int set_direct_map_invalid_noflush(struct page *page)
 {
-	struct page_change_data data = {
-		.set_mask = __pgprot(0),
-		.clear_mask = __pgprot(PTE_VALID),
-	};
+	pgprot_t clear_mask = __pgprot(PTE_VALID);
+	pgprot_t set_mask = __pgprot(0);
 
 	if (!can_set_direct_map())
 		return 0;
 
-	return apply_to_page_range(&init_mm,
-				   (unsigned long)page_address(page),
-				   PAGE_SIZE, change_page_range, &data);
+	return update_range_prot((unsigned long)page_address(page),
+				 PAGE_SIZE, set_mask, clear_mask);
 }
 
 int set_direct_map_default_noflush(struct page *page)
 {
-	struct page_change_data data = {
-		.set_mask = __pgprot(PTE_VALID | PTE_WRITE),
-		.clear_mask = __pgprot(PTE_RDONLY),
-	};
+	pgprot_t set_mask = __pgprot(PTE_VALID | PTE_WRITE);
+	pgprot_t clear_mask = __pgprot(PTE_RDONLY);
 
 	if (!can_set_direct_map())
 		return 0;
 
-	return apply_to_page_range(&init_mm,
-				   (unsigned long)page_address(page),
-				   PAGE_SIZE, change_page_range, &data);
+	return update_range_prot((unsigned long)page_address(page),
+				 PAGE_SIZE, set_mask, clear_mask);
 }
 
 static int __set_memory_enc_dec(unsigned long addr,
diff --git a/arch/arm64/mm/proc.S b/arch/arm64/mm/proc.S
index 8c75965afc9e..86818511962b 100644
--- a/arch/arm64/mm/proc.S
+++ b/arch/arm64/mm/proc.S
@@ -245,10 +245,6 @@ SYM_FUNC_ALIAS(__pi_idmap_cpu_replace_ttbr1, idmap_cpu_replace_ttbr1)
  *
  * Called exactly once from stop_machine context by each CPU found during boot.
  */
-	.pushsection	".data", "aw", %progbits
-SYM_DATA(__idmap_kpti_flag, .long 1)
-	.popsection
-
 SYM_TYPED_FUNC_START(idmap_kpti_install_ng_mappings)
 	cpu		.req	w0
 	temp_pte	.req	x0
@@ -273,7 +269,7 @@ SYM_TYPED_FUNC_START(idmap_kpti_install_ng_mappings)
 
 	mov	x5, x3				// preserve temp_pte arg
 	mrs	swapper_ttb, ttbr1_el1
-	adr_l	flag_ptr, __idmap_kpti_flag
+	adr_l	flag_ptr, idmap_kpti_bbml2_flag
 
 	cbnz	cpu, __idmap_kpti_secondary
 
@@ -416,7 +412,25 @@ alternative_else_nop_endif
 __idmap_kpti_secondary:
 	/* Uninstall swapper before surgery begins */
 	__idmap_cpu_set_reserved_ttbr1 x16, x17
+	b scondary_cpu_wait
+
+	.unreq	swapper_ttb
+	.unreq	flag_ptr
+SYM_FUNC_END(idmap_kpti_install_ng_mappings)
+	.popsection
+#endif
+
+	.pushsection ".idmap.text", "a"
+SYM_TYPED_FUNC_START(wait_linear_map_split_to_ptes)
+	/* Must be same registers as in idmap_kpti_install_ng_mappings */
+	swapper_ttb	.req	x3
+	flag_ptr	.req	x4
+
+	mrs     swapper_ttb, ttbr1_el1
+	adr_l   flag_ptr, idmap_kpti_bbml2_flag
+	__idmap_cpu_set_reserved_ttbr1 x16, x17
 
+scondary_cpu_wait:
 	/* Increment the flag to let the boot CPU we're ready */
 1:	ldxr	w16, [flag_ptr]
 	add	w16, w16, #1
@@ -436,9 +450,8 @@ __idmap_kpti_secondary:
 
 	.unreq	swapper_ttb
 	.unreq	flag_ptr
-SYM_FUNC_END(idmap_kpti_install_ng_mappings)
+SYM_FUNC_END(wait_linear_map_split_to_ptes)
 	.popsection
-#endif
 
 /*
  *	__cpu_setup
diff --git a/arch/arm64/mm/ptdump.c b/arch/arm64/mm/ptdump.c
index 421a5de806c6..ab9899ca1e5f 100644
--- a/arch/arm64/mm/ptdump.c
+++ b/arch/arm64/mm/ptdump.c
@@ -283,6 +283,13 @@ void note_page_flush(struct ptdump_state *pt_st)
 	note_page(pt_st, 0, -1, pte_val(pte_zero));
 }
 
+static void arm64_ptdump_walk_pgd(struct ptdump_state *st, struct mm_struct *mm)
+{
+	static_branch_inc(&arm64_ptdump_lock_key);
+	ptdump_walk_pgd(st, mm, NULL);
+	static_branch_dec(&arm64_ptdump_lock_key);
+}
+
 void ptdump_walk(struct seq_file *s, struct ptdump_info *info)
 {
 	unsigned long end = ~0UL;
@@ -311,7 +318,7 @@ void ptdump_walk(struct seq_file *s, struct ptdump_info *info)
 		}
 	};
 
-	ptdump_walk_pgd(&st.ptdump, info->mm, NULL);
+	arm64_ptdump_walk_pgd(&st.ptdump, info->mm);
 }
 
 static void __init ptdump_initialize(void)
@@ -353,7 +360,7 @@ bool ptdump_check_wx(void)
 		}
 	};
 
-	ptdump_walk_pgd(&st.ptdump, &init_mm, NULL);
+	arm64_ptdump_walk_pgd(&st.ptdump, &init_mm);
 
 	if (st.wx_pages || st.uxn_pages) {
 		pr_warn("Checked W+X mappings: FAILED, %lu W+X pages found, %lu non-UXN pages found\n",
diff --git a/arch/arm64/net/Makefile b/arch/arm64/net/Makefile
index 5c540efb7d9b..3ae382bfca87 100644
--- a/arch/arm64/net/Makefile
+++ b/arch/arm64/net/Makefile
@@ -2,4 +2,4 @@
 #
 # ARM64 networking code
 #
-obj-$(CONFIG_BPF_JIT) += bpf_jit_comp.o
+obj-$(CONFIG_BPF_JIT) += bpf_jit_comp.o bpf_timed_may_goto.o
diff --git a/arch/arm64/net/bpf_jit_comp.c b/arch/arm64/net/bpf_jit_comp.c
index 52ffe115a8c4..ab83089c3d8f 100644
--- a/arch/arm64/net/bpf_jit_comp.c
+++ b/arch/arm64/net/bpf_jit_comp.c
@@ -185,7 +185,7 @@ static inline void emit_bti(u32 insn, struct jit_ctx *ctx)
 
 static inline void emit_kcfi(u32 hash, struct jit_ctx *ctx)
 {
-	if (IS_ENABLED(CONFIG_CFI_CLANG))
+	if (IS_ENABLED(CONFIG_CFI))
 		emit_u32_data(hash, ctx);
 }
 
@@ -1066,19 +1066,53 @@ static void build_epilogue(struct jit_ctx *ctx, bool was_classic)
 	emit(A64_RET(A64_LR), ctx);
 }
 
-#define BPF_FIXUP_OFFSET_MASK	GENMASK(26, 0)
+/*
+ * Metadata encoding for exception handling in JITed code.
+ *
+ * Format of `fixup` field in `struct exception_table_entry`:
+ *
+ * Bit layout of `fixup` (32-bit):
+ *
+ * +-----------+--------+-----------+-----------+----------+
+ * |   31-27   | 26-22  |     21    |   20-16   |   15-0   |
+ * |           |        |           |           |          |
+ * | FIXUP_REG | Unused | ARENA_ACC | ARENA_REG |  OFFSET  |
+ * +-----------+--------+-----------+-----------+----------+
+ *
+ * - OFFSET (16 bits): Offset used to compute address for Load/Store instruction.
+ * - ARENA_REG (5 bits): Register that is used to calculate the address for load/store when
+ *                       accessing the arena region.
+ * - ARENA_ACCESS (1 bit): This bit is set when the faulting instruction accessed the arena region.
+ * - FIXUP_REG (5 bits): Destination register for the load instruction (cleared on fault) or set to
+ *                       DONT_CLEAR if it is a store instruction.
+ */
+
+#define BPF_FIXUP_OFFSET_MASK      GENMASK(15, 0)
+#define BPF_FIXUP_ARENA_REG_MASK   GENMASK(20, 16)
+#define BPF_ARENA_ACCESS           BIT(21)
 #define BPF_FIXUP_REG_MASK	GENMASK(31, 27)
 #define DONT_CLEAR 5 /* Unused ARM64 register from BPF's POV */
 
 bool ex_handler_bpf(const struct exception_table_entry *ex,
 		    struct pt_regs *regs)
 {
-	off_t offset = FIELD_GET(BPF_FIXUP_OFFSET_MASK, ex->fixup);
 	int dst_reg = FIELD_GET(BPF_FIXUP_REG_MASK, ex->fixup);
+	s16 off = FIELD_GET(BPF_FIXUP_OFFSET_MASK, ex->fixup);
+	int arena_reg = FIELD_GET(BPF_FIXUP_ARENA_REG_MASK, ex->fixup);
+	bool is_arena = !!(ex->fixup & BPF_ARENA_ACCESS);
+	bool is_write = (dst_reg == DONT_CLEAR);
+	unsigned long addr;
+
+	if (is_arena) {
+		addr = regs->regs[arena_reg] + off;
+		bpf_prog_report_arena_violation(is_write, addr, regs->pc);
+	}
 
 	if (dst_reg != DONT_CLEAR)
 		regs->regs[dst_reg] = 0;
-	regs->pc = (unsigned long)&ex->fixup - offset;
+	/* Skip the faulting instruction */
+	regs->pc += AARCH64_INSN_SIZE;
+
 	return true;
 }
 
@@ -1088,7 +1122,9 @@ static int add_exception_handler(const struct bpf_insn *insn,
 				 int dst_reg)
 {
 	off_t ins_offset;
-	off_t fixup_offset;
+	s16 off = insn->off;
+	bool is_arena;
+	int arena_reg;
 	unsigned long pc;
 	struct exception_table_entry *ex;
 
@@ -1097,11 +1133,16 @@ static int add_exception_handler(const struct bpf_insn *insn,
 		return 0;
 
 	if (BPF_MODE(insn->code) != BPF_PROBE_MEM &&
-		BPF_MODE(insn->code) != BPF_PROBE_MEMSX &&
-			BPF_MODE(insn->code) != BPF_PROBE_MEM32 &&
-				BPF_MODE(insn->code) != BPF_PROBE_ATOMIC)
+	    BPF_MODE(insn->code) != BPF_PROBE_MEMSX &&
+	    BPF_MODE(insn->code) != BPF_PROBE_MEM32 &&
+	    BPF_MODE(insn->code) != BPF_PROBE_MEM32SX &&
+	    BPF_MODE(insn->code) != BPF_PROBE_ATOMIC)
 		return 0;
 
+	is_arena = (BPF_MODE(insn->code) == BPF_PROBE_MEM32) ||
+		   (BPF_MODE(insn->code) == BPF_PROBE_MEM32SX) ||
+		   (BPF_MODE(insn->code) == BPF_PROBE_ATOMIC);
+
 	if (!ctx->prog->aux->extable ||
 	    WARN_ON_ONCE(ctx->exentry_idx >= ctx->prog->aux->num_exentries))
 		return -EINVAL;
@@ -1120,22 +1161,6 @@ static int add_exception_handler(const struct bpf_insn *insn,
 		return -ERANGE;
 
 	/*
-	 * Since the extable follows the program, the fixup offset is always
-	 * negative and limited to BPF_JIT_REGION_SIZE. Store a positive value
-	 * to keep things simple, and put the destination register in the upper
-	 * bits. We don't need to worry about buildtime or runtime sort
-	 * modifying the upper bits because the table is already sorted, and
-	 * isn't part of the main exception table.
-	 *
-	 * The fixup_offset is set to the next instruction from the instruction
-	 * that may fault. The execution will jump to this after handling the
-	 * fault.
-	 */
-	fixup_offset = (long)&ex->fixup - (pc + AARCH64_INSN_SIZE);
-	if (!FIELD_FIT(BPF_FIXUP_OFFSET_MASK, fixup_offset))
-		return -ERANGE;
-
-	/*
 	 * The offsets above have been calculated using the RO buffer but we
 	 * need to use the R/W buffer for writes.
 	 * switch ex to rw buffer for writing.
@@ -1147,8 +1172,26 @@ static int add_exception_handler(const struct bpf_insn *insn,
 	if (BPF_CLASS(insn->code) != BPF_LDX)
 		dst_reg = DONT_CLEAR;
 
-	ex->fixup = FIELD_PREP(BPF_FIXUP_OFFSET_MASK, fixup_offset) |
-		    FIELD_PREP(BPF_FIXUP_REG_MASK, dst_reg);
+	ex->fixup = FIELD_PREP(BPF_FIXUP_REG_MASK, dst_reg);
+
+	if (is_arena) {
+		ex->fixup |= BPF_ARENA_ACCESS;
+		/*
+		 * insn->src_reg/dst_reg holds the address in the arena region with upper 32-bits
+		 * being zero because of a preceding addr_space_cast(r<n>, 0x0, 0x1) instruction.
+		 * This address is adjusted with the addition of arena_vm_start (see the
+		 * implementation of BPF_PROBE_MEM32 and BPF_PROBE_ATOMIC) before being used for the
+		 * memory access. Pass the reg holding the unmodified 32-bit address to
+		 * ex_handler_bpf.
+		 */
+		if (BPF_CLASS(insn->code) == BPF_LDX)
+			arena_reg = bpf2a64[insn->src_reg];
+		else
+			arena_reg = bpf2a64[insn->dst_reg];
+
+		ex->fixup |=  FIELD_PREP(BPF_FIXUP_OFFSET_MASK, off) |
+			      FIELD_PREP(BPF_FIXUP_ARENA_REG_MASK, arena_reg);
+	}
 
 	ex->type = EX_TYPE_BPF;
 
@@ -1558,7 +1601,13 @@ emit_cond_jmp:
 		if (ret < 0)
 			return ret;
 		emit_call(func_addr, ctx);
-		emit(A64_MOV(1, r0, A64_R(0)), ctx);
+		/*
+		 * Call to arch_bpf_timed_may_goto() is emitted by the
+		 * verifier and called with custom calling convention with
+		 * first argument and return value in BPF_REG_AX (x9).
+		 */
+		if (func_addr != (u64)arch_bpf_timed_may_goto)
+			emit(A64_MOV(1, r0, A64_R(0)), ctx);
 		break;
 	}
 	/* tail call */
@@ -1612,7 +1661,11 @@ emit_cond_jmp:
 	case BPF_LDX | BPF_PROBE_MEM32 | BPF_H:
 	case BPF_LDX | BPF_PROBE_MEM32 | BPF_W:
 	case BPF_LDX | BPF_PROBE_MEM32 | BPF_DW:
-		if (BPF_MODE(insn->code) == BPF_PROBE_MEM32) {
+	case BPF_LDX | BPF_PROBE_MEM32SX | BPF_B:
+	case BPF_LDX | BPF_PROBE_MEM32SX | BPF_H:
+	case BPF_LDX | BPF_PROBE_MEM32SX | BPF_W:
+		if (BPF_MODE(insn->code) == BPF_PROBE_MEM32 ||
+		    BPF_MODE(insn->code) == BPF_PROBE_MEM32SX) {
 			emit(A64_ADD(1, tmp2, src, arena_vm_base), ctx);
 			src = tmp2;
 		}
@@ -1624,7 +1677,8 @@ emit_cond_jmp:
 			off_adj = off;
 		}
 		sign_extend = (BPF_MODE(insn->code) == BPF_MEMSX ||
-				BPF_MODE(insn->code) == BPF_PROBE_MEMSX);
+				BPF_MODE(insn->code) == BPF_PROBE_MEMSX ||
+				 BPF_MODE(insn->code) == BPF_PROBE_MEM32SX);
 		switch (BPF_SIZE(code)) {
 		case BPF_W:
 			if (is_lsi_offset(off_adj, 2)) {
@@ -1832,9 +1886,11 @@ emit_cond_jmp:
 		if (ret)
 			return ret;
 
-		ret = add_exception_handler(insn, ctx, dst);
-		if (ret)
-			return ret;
+		if (BPF_MODE(insn->code) == BPF_PROBE_ATOMIC) {
+			ret = add_exception_handler(insn, ctx, dst);
+			if (ret)
+				return ret;
+		}
 		break;
 
 	default:
@@ -2767,7 +2823,6 @@ int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *ro_image,
 		goto out;
 	}
 
-	bpf_flush_icache(ro_image, ro_image + size);
 out:
 	kvfree(image);
 	return ret;
@@ -3038,6 +3093,11 @@ bool bpf_jit_bypass_spec_v4(void)
 	return true;
 }
 
+bool bpf_jit_supports_timed_may_goto(void)
+{
+	return true;
+}
+
 bool bpf_jit_inlines_helper_call(s32 imm)
 {
 	switch (imm) {
@@ -3064,8 +3124,7 @@ void bpf_jit_free(struct bpf_prog *prog)
 		 * before freeing it.
 		 */
 		if (jit_data) {
-			bpf_arch_text_copy(&jit_data->ro_header->size, &jit_data->header->size,
-					   sizeof(jit_data->header->size));
+			bpf_jit_binary_pack_finalize(jit_data->ro_header, jit_data->header);
 			kfree(jit_data);
 		}
 		prog->bpf_func -= cfi_get_offset();
diff --git a/arch/arm64/net/bpf_timed_may_goto.S b/arch/arm64/net/bpf_timed_may_goto.S
new file mode 100644
index 000000000000..894cfcd7b241
--- /dev/null
+++ b/arch/arm64/net/bpf_timed_may_goto.S
@@ -0,0 +1,40 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2025 Puranjay Mohan <puranjay@kernel.org> */
+
+#include <linux/linkage.h>
+
+SYM_FUNC_START(arch_bpf_timed_may_goto)
+	/* Allocate stack space and emit frame record */
+	stp     x29, x30, [sp, #-64]!
+	mov     x29, sp
+
+	/* Save BPF registers R0 - R5 (x7, x0-x4)*/
+	stp	x7, x0, [sp, #16]
+	stp	x1, x2, [sp, #32]
+	stp	x3, x4, [sp, #48]
+
+	/*
+	 * Stack depth was passed in BPF_REG_AX (x9), add it to the BPF_FP
+	 * (x25) to get the pointer to count and timestamp and pass it as the
+	 * first argument in x0.
+	 *
+	 * Before generating the call to arch_bpf_timed_may_goto, the verifier
+	 * generates a load instruction using FP, i.e. REG_AX = *(u64 *)(FP -
+	 * stack_off_cnt), so BPF_REG_FP (x25) is always set up by the arm64
+	 * jit in this case.
+	 */
+	add	x0, x9, x25
+	bl	bpf_check_timed_may_goto
+	/* BPF_REG_AX(x9) will be stored into count, so move return value to it. */
+	mov	x9, x0
+
+	/* Restore BPF registers R0 - R5 (x7, x0-x4) */
+	ldp	x7, x0, [sp, #16]
+	ldp	x1, x2, [sp, #32]
+	ldp	x3, x4, [sp, #48]
+
+	/* Restore FP and LR */
+	ldp     x29, x30, [sp], #64
+
+	ret
+SYM_FUNC_END(arch_bpf_timed_may_goto)
diff --git a/arch/arm64/tools/cpucaps b/arch/arm64/tools/cpucaps
index ef0b7946f5a4..9ff5cdbd2759 100644
--- a/arch/arm64/tools/cpucaps
+++ b/arch/arm64/tools/cpucaps
@@ -53,6 +53,7 @@ HAS_S1PIE
 HAS_S1POE
 HAS_SCTLR2
 HAS_RAS_EXTN
+HAS_RASV1P1_EXTN
 HAS_RNG
 HAS_SB
 HAS_STAGE2_FWB
diff --git a/arch/arm64/tools/gen-sysreg.awk b/arch/arm64/tools/gen-sysreg.awk
index f2a1732cb1f6..bbbb812603e8 100755
--- a/arch/arm64/tools/gen-sysreg.awk
+++ b/arch/arm64/tools/gen-sysreg.awk
@@ -122,6 +122,10 @@ $1 == "SysregFields" && block_current() == "Root" {
 	res1 = "UL(0)"
 	unkn = "UL(0)"
 
+	if (reg in defined_fields)
+		fatal("Duplicate SysregFields definition for " reg)
+	defined_fields[reg] = 1
+
 	next_bit = 63
 
 	next
@@ -162,6 +166,10 @@ $1 == "Sysreg" && block_current() == "Root" {
 	res1 = "UL(0)"
 	unkn = "UL(0)"
 
+	if (reg in defined_regs)
+		fatal("Duplicate Sysreg definition for " reg)
+	defined_regs[reg] = 1
+
 	define("REG_" reg, "S" op0 "_" op1 "_C" crn "_C" crm "_" op2)
 	define("SYS_" reg, "sys_reg(" op0 ", " op1 ", " crn ", " crm ", " op2 ")")
 
@@ -284,6 +292,8 @@ $1 == "SignedEnum" && (block_current() == "Sysreg" || block_current() == "Sysreg
 	define_field(reg, field, msb, lsb)
 	define_field_sign(reg, field, "true")
 
+	delete seen_enum_vals
+
 	next
 }
 
@@ -297,6 +307,8 @@ $1 == "UnsignedEnum" && (block_current() == "Sysreg" || block_current() == "Sysr
 	define_field(reg, field, msb, lsb)
 	define_field_sign(reg, field, "false")
 
+	delete seen_enum_vals
+
 	next
 }
 
@@ -309,6 +321,8 @@ $1 == "Enum" && (block_current() == "Sysreg" || block_current() == "SysregFields
 
 	define_field(reg, field, msb, lsb)
 
+	delete seen_enum_vals
+
 	next
 }
 
@@ -320,6 +334,8 @@ $1 == "EndEnum" && block_current() == "Enum" {
 	lsb = null
 	print ""
 
+	delete seen_enum_vals
+
 	block_pop()
 	next
 }
@@ -329,6 +345,10 @@ $1 == "EndEnum" && block_current() == "Enum" {
 	val = $1
 	name = $2
 
+	if (val in seen_enum_vals)
+		fatal("Duplicate Enum value " val " for " name)
+	seen_enum_vals[val] = 1
+
 	define(reg "_" field "_" name, "UL(" val ")")
 	next
 }
diff --git a/arch/arm64/tools/sysreg b/arch/arm64/tools/sysreg
index 696ab1f32a67..1c6cdf9d54bb 100644
--- a/arch/arm64/tools/sysreg
+++ b/arch/arm64/tools/sysreg
@@ -31,7 +31,7 @@
 # Mapping	<name_EL1>
 # EndSysreg
 
-# Where multiple system regsiters are not VHE aliases but share a
+# Where multiple system registers are not VHE aliases but share a
 # common layout, a SysregFields block can be used to describe the
 # shared layout:
 
@@ -54,7 +54,7 @@
 #
 # In general it is recommended that new enumeration items be named for the
 # feature that introduces them (eg, FEAT_LS64_ACCDATA introduces enumeration
-# item ACCDATA) though it may be more taseful to do something else.
+# item ACCDATA) though it may be more tasteful to do something else.
 
 Sysreg	OSDTRRX_EL1	2	0	0	0	2
 Res0	63:32
@@ -474,7 +474,7 @@ EndEnum
 Enum	7:4	Security
 	0b0000	NI
 	0b0001	EL3
-	0b0001	NSACR_RFR
+	0b0010	NSACR_RFR
 EndEnum
 UnsignedEnum	3:0	ProgMod
 	0b0000	NI
@@ -1693,7 +1693,7 @@ UnsignedEnum	43:40	TraceFilt
 	0b0000	NI
 	0b0001	IMP
 EndEnum
-UnsignedEnum	39:36	DoubleLock
+SignedEnum	39:36	DoubleLock
 	0b0000	IMP
 	0b1111	NI
 EndEnum
@@ -2409,7 +2409,7 @@ UnsignedEnum	11:8	ASID2
 	0b0000	NI
 	0b0001	IMP
 EndEnum
-SignedEnum	7:4	EIESB
+UnsignedEnum	7:4	EIESB
 	0b0000	NI
 	0b0001	ToEL3
 	0b0010	ToELx
@@ -2528,10 +2528,6 @@ Field	17:16	ZEN
 Res0	15:0
 EndSysreg
 
-Sysreg	CPACR_EL12      3	5	1	0	2
-Mapping	CPACR_EL1
-EndSysreg
-
 Sysreg	CPACRALIAS_EL1  3	0	1	4	4
 Mapping	CPACR_EL1
 EndSysreg
@@ -2576,10 +2572,6 @@ Sysreg	PFAR_EL12	3	5	6	0	5
 Mapping	PFAR_EL1
 EndSysreg
 
-Sysreg	RCWSMASK_EL1	3	0	13	0	3
-Field	63:0	RCWSMASK
-EndSysreg
-
 Sysreg	SCTLR2_EL1      3	0	1	0	3
 Res0    63:13
 Field   12      CPTM0
@@ -2994,11 +2986,20 @@ Field	0	RND
 EndSysreg
 
 Sysreg	PMSFCR_EL1	3	0	9	9	4
-Res0	63:19
+Res0	63:53
+Field	52	SIMDm
+Field	51	FPm
+Field	50	STm
+Field	49	LDm
+Field	48	Bm
+Res0	47:21
+Field	20	SIMD
+Field	19	FP
 Field	18	ST
 Field	17	LD
 Field	16	B
-Res0	15:4
+Res0	15:5
+Field	4	FDS
 Field	3	FnE
 Field	2	FL
 Field	1	FT
@@ -4756,17 +4757,53 @@ Field   37      TBI0
 Field   36      AS
 Res0    35
 Field   34:32   IPS
-Field   31:30   TG1
-Field   29:28   SH1
-Field   27:26   ORGN1
-Field   25:24   IRGN1
+Enum	31:30   TG1
+	0b01	16K
+	0b10	4K
+	0b11	64K
+EndEnum
+Enum	29:28   SH1
+	0b00	NONE
+	0b10	OUTER
+	0b11	INNER
+EndEnum
+Enum	27:26  ORGN1
+	0b00	NC
+	0b01	WBWA
+	0b10	WT
+	0b11	WBnWA
+EndEnum
+Enum	25:24   IRGN1
+	0b00	NC
+	0b01	WBWA
+	0b10	WT
+	0b11	WBnWA
+EndEnum
 Field   23      EPD1
 Field   22      A1
 Field   21:16   T1SZ
-Field   15:14   TG0
-Field   13:12   SH0
-Field   11:10   ORGN0
-Field   9:8     IRGN0
+Enum	15:14   TG0
+	0b00	4K
+	0b01	64K
+	0b10	16K
+EndEnum
+Enum	13:12   SH0
+	0b00	NONE
+	0b10	OUTER
+	0b11	INNER
+EndEnum
+Enum	11:10  ORGN0
+	0b00	NC
+	0b01	WBWA
+	0b10	WT
+	0b11	WBnWA
+EndEnum
+Enum	9:8   IRGN0
+	0b00	NC
+	0b01	WBWA
+	0b10	WT
+	0b11	WBnWA
+EndEnum
 Field   7       EPD0
 Res0    6
 Field   5:0     T0SZ
diff --git a/arch/csky/include/asm/bitops.h b/arch/csky/include/asm/bitops.h
index 72e1b2aa29a0..80d67eee6e86 100644
--- a/arch/csky/include/asm/bitops.h
+++ b/arch/csky/include/asm/bitops.h
@@ -9,7 +9,7 @@
 /*
  * asm-generic/bitops/ffs.h
  */
-static inline int ffs(int x)
+static inline __attribute_const__ int ffs(int x)
 {
 	if (!x)
 		return 0;
@@ -26,7 +26,7 @@ static inline int ffs(int x)
 /*
  * asm-generic/bitops/__ffs.h
  */
-static __always_inline unsigned long __ffs(unsigned long x)
+static __always_inline __attribute_const__ unsigned long __ffs(unsigned long x)
 {
 	asm volatile (
 		"brev %0\n"
@@ -39,7 +39,7 @@ static __always_inline unsigned long __ffs(unsigned long x)
 /*
  * asm-generic/bitops/fls.h
  */
-static __always_inline int fls(unsigned int x)
+static __always_inline __attribute_const__ int fls(unsigned int x)
 {
 	asm volatile(
 		"ff1 %0\n"
@@ -52,7 +52,7 @@ static __always_inline int fls(unsigned int x)
 /*
  * asm-generic/bitops/__fls.h
  */
-static __always_inline unsigned long __fls(unsigned long x)
+static __always_inline __attribute_const__ unsigned long __fls(unsigned long x)
 {
 	return fls(x) - 1;
 }
diff --git a/arch/csky/kernel/asm-offsets.c b/arch/csky/kernel/asm-offsets.c
index d1e903579473..5525c8e7e1d9 100644
--- a/arch/csky/kernel/asm-offsets.c
+++ b/arch/csky/kernel/asm-offsets.c
@@ -1,5 +1,6 @@
 // SPDX-License-Identifier: GPL-2.0
 // Copyright (C) 2018 Hangzhou C-SKY Microsystems co.,ltd.
+#define COMPILE_OFFSETS
 
 #include <linux/sched.h>
 #include <linux/kernel_stat.h>
diff --git a/arch/csky/kernel/process.c b/arch/csky/kernel/process.c
index 0c6e4b17fe00..a7a90340042a 100644
--- a/arch/csky/kernel/process.c
+++ b/arch/csky/kernel/process.c
@@ -32,7 +32,7 @@ void flush_thread(void){}
 
 int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
-	unsigned long clone_flags = args->flags;
+	u64 clone_flags = args->flags;
 	unsigned long usp = args->stack;
 	unsigned long tls = args->tls;
 	struct switch_stack *childstack;
diff --git a/arch/hexagon/include/asm/bitops.h b/arch/hexagon/include/asm/bitops.h
index 160d8f37fa1a..b23cb13833af 100644
--- a/arch/hexagon/include/asm/bitops.h
+++ b/arch/hexagon/include/asm/bitops.h
@@ -200,7 +200,7 @@ arch_test_bit_acquire(unsigned long nr, const volatile unsigned long *addr)
  *
  * Undefined if no zero exists, so code should check against ~0UL first.
  */
-static inline long ffz(int x)
+static inline long __attribute_const__ ffz(int x)
 {
 	int r;
 
@@ -217,7 +217,7 @@ static inline long ffz(int x)
  * This is defined the same way as ffs.
  * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
  */
-static inline int fls(unsigned int x)
+static inline __attribute_const__ int fls(unsigned int x)
 {
 	int r;
 
@@ -238,7 +238,7 @@ static inline int fls(unsigned int x)
  * the libc and compiler builtin ffs routines, therefore
  * differs in spirit from the above ffz (man ffs).
  */
-static inline int ffs(int x)
+static inline __attribute_const__ int ffs(int x)
 {
 	int r;
 
@@ -260,7 +260,7 @@ static inline int ffs(int x)
  * bits_per_long assumed to be 32
  * numbering starts at 0 I think (instead of 1 like ffs)
  */
-static inline unsigned long __ffs(unsigned long word)
+static inline __attribute_const__ unsigned long __ffs(unsigned long word)
 {
 	int num;
 
@@ -278,7 +278,7 @@ static inline unsigned long __ffs(unsigned long word)
  * Undefined if no set bit exists, so code should check against 0 first.
  * bits_per_long assumed to be 32
  */
-static inline unsigned long __fls(unsigned long word)
+static inline __attribute_const__ unsigned long __fls(unsigned long word)
 {
 	int num;
 
diff --git a/arch/hexagon/kernel/asm-offsets.c b/arch/hexagon/kernel/asm-offsets.c
index 03a7063f9456..50eea9fa6f13 100644
--- a/arch/hexagon/kernel/asm-offsets.c
+++ b/arch/hexagon/kernel/asm-offsets.c
@@ -8,6 +8,7 @@
  *
  * Copyright (c) 2010-2012, The Linux Foundation. All rights reserved.
  */
+#define COMPILE_OFFSETS
 
 #include <linux/compat.h>
 #include <linux/types.h>
diff --git a/arch/hexagon/kernel/process.c b/arch/hexagon/kernel/process.c
index 2a77bfd75694..15b4992bfa29 100644
--- a/arch/hexagon/kernel/process.c
+++ b/arch/hexagon/kernel/process.c
@@ -52,7 +52,7 @@ void arch_cpu_idle(void)
  */
 int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
-	unsigned long clone_flags = args->flags;
+	u64 clone_flags = args->flags;
 	unsigned long usp = args->stack;
 	unsigned long tls = args->tls;
 	struct thread_info *ti = task_thread_info(p);
diff --git a/arch/loongarch/Kconfig b/arch/loongarch/Kconfig
index f0abc38c40ac..e6225539579f 100644
--- a/arch/loongarch/Kconfig
+++ b/arch/loongarch/Kconfig
@@ -70,6 +70,8 @@ config LOONGARCH
 	select ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS
 	select ARCH_SUPPORTS_NUMA_BALANCING
 	select ARCH_SUPPORTS_RT
+	select ARCH_SUPPORTS_SCHED_SMT if SMP
+	select ARCH_SUPPORTS_SCHED_MC  if SMP
 	select ARCH_USE_BUILTIN_BSWAP
 	select ARCH_USE_CMPXCHG_LOCKREF
 	select ARCH_USE_MEMTEST
@@ -108,8 +110,6 @@ config LOONGARCH
 	select GENERIC_SCHED_CLOCK
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_TIME_VSYSCALL
-	select GENERIC_VDSO_DATA_STORE
-	select GENERIC_VDSO_TIME_NS
 	select GPIOLIB
 	select HAS_IOPORT
 	select HAVE_ARCH_AUDITSYSCALL
@@ -140,6 +140,7 @@ config LOONGARCH
 	select HAVE_EBPF_JIT
 	select HAVE_EFFICIENT_UNALIGNED_ACCESS if !ARCH_STRICT_ALIGN
 	select HAVE_EXIT_THREAD
+	select HAVE_GENERIC_TIF_BITS
 	select HAVE_GUP_FAST
 	select HAVE_FTRACE_GRAPH_FUNC
 	select HAVE_FUNCTION_ARG_ACCESS_API
@@ -298,6 +299,10 @@ config AS_HAS_LVZ_EXTENSION
 config CC_HAS_ANNOTATE_TABLEJUMP
 	def_bool $(cc-option,-mannotate-tablejump)
 
+config RUSTC_HAS_ANNOTATE_TABLEJUMP
+	depends on RUST
+	def_bool $(rustc-option,-Cllvm-args=--loongarch-annotate-tablejump)
+
 menu "Kernel type and options"
 
 source "kernel/Kconfig.hz"
@@ -448,23 +453,6 @@ config EFI_STUB
 	  This kernel feature allows the kernel to be loaded directly by
 	  EFI firmware without the use of a bootloader.
 
-config SCHED_SMT
-	bool "SMT scheduler support"
-	depends on SMP
-	default y
-	help
-	  Improves scheduler's performance when there are multiple
-	  threads in one physical core.
-
-config SCHED_MC
-	bool "Multi-core scheduler support"
-	depends on SMP
-	default y
-	help
-	  Multi-core scheduler support improves the CPU scheduler's decision
-	  making when dealing with multi-core CPU chips at a cost of slightly
-	  increased overhead in some places.
-
 config SMP
 	bool "Multi-Processing support"
 	help
@@ -563,10 +551,14 @@ config ARCH_STRICT_ALIGN
 	  -mstrict-align build parameter to prevent unaligned accesses.
 
 	  CPUs with h/w unaligned access support:
-	  Loongson-2K2000/2K3000/3A5000/3C5000/3D5000.
+	  Loongson-2K2000/2K3000 and all of Loongson-3 series processors
+	  based on LoongArch.
 
 	  CPUs without h/w unaligned access support:
-	  Loongson-2K500/2K1000.
+	  Loongson-2K0300/2K0500/2K1000.
+
+	  If you want to make sure whether to support unaligned memory access
+	  on your hardware, please read the bit 20 (UAL) of CPUCFG1 register.
 
 	  This option is enabled by default to make the kernel be able to run
 	  on all LoongArch systems. But you can disable it manually if you want
diff --git a/arch/loongarch/Makefile b/arch/loongarch/Makefile
index b0703a4e02a2..ae419e32f22e 100644
--- a/arch/loongarch/Makefile
+++ b/arch/loongarch/Makefile
@@ -106,6 +106,17 @@ KBUILD_CFLAGS			+= -mannotate-tablejump
 else
 KBUILD_CFLAGS			+= -fno-jump-tables # keep compatibility with older compilers
 endif
+ifdef CONFIG_RUSTC_HAS_ANNOTATE_TABLEJUMP
+KBUILD_RUSTFLAGS		+= -Cllvm-args=--loongarch-annotate-tablejump
+else
+KBUILD_RUSTFLAGS		+= -Zno-jump-tables # keep compatibility with older compilers
+endif
+ifdef CONFIG_LTO_CLANG
+# The annotate-tablejump option can not be passed to LLVM backend when LTO is enabled.
+# Ensure it is aware of linker with LTO, '--loongarch-annotate-tablejump' also needs to
+# be passed via '-mllvm' to ld.lld.
+KBUILD_LDFLAGS			+= -mllvm --loongarch-annotate-tablejump
+endif
 endif
 
 KBUILD_RUSTFLAGS		+= --target=loongarch64-unknown-none-softfloat -Ccode-model=small
diff --git a/arch/loongarch/include/asm/acenv.h b/arch/loongarch/include/asm/acenv.h
index 52f298f7293b..483c955f2ae5 100644
--- a/arch/loongarch/include/asm/acenv.h
+++ b/arch/loongarch/include/asm/acenv.h
@@ -10,9 +10,8 @@
 #ifndef _ASM_LOONGARCH_ACENV_H
 #define _ASM_LOONGARCH_ACENV_H
 
-/*
- * This header is required by ACPI core, but we have nothing to fill in
- * right now. Will be updated later when needed.
- */
+#ifdef CONFIG_ARCH_STRICT_ALIGN
+#define ACPI_MISALIGNMENT_NOT_SUPPORTED
+#endif /* CONFIG_ARCH_STRICT_ALIGN */
 
 #endif /* _ASM_LOONGARCH_ACENV_H */
diff --git a/arch/loongarch/include/asm/kvm_mmu.h b/arch/loongarch/include/asm/kvm_mmu.h
index 099bafc6f797..e36cc7e8ed20 100644
--- a/arch/loongarch/include/asm/kvm_mmu.h
+++ b/arch/loongarch/include/asm/kvm_mmu.h
@@ -16,6 +16,13 @@
  */
 #define KVM_MMU_CACHE_MIN_PAGES	(CONFIG_PGTABLE_LEVELS - 1)
 
+/*
+ * _PAGE_MODIFIED is a SW pte bit, it records page ever written on host
+ * kernel, on secondary MMU it records the page writeable attribute, in
+ * order for fast path handling.
+ */
+#define KVM_PAGE_WRITEABLE	_PAGE_MODIFIED
+
 #define _KVM_FLUSH_PGTABLE	0x1
 #define _KVM_HAS_PGMASK		0x2
 #define kvm_pfn_pte(pfn, prot)	(((pfn) << PFN_PTE_SHIFT) | pgprot_val(prot))
@@ -52,10 +59,10 @@ static inline void kvm_set_pte(kvm_pte_t *ptep, kvm_pte_t val)
 	WRITE_ONCE(*ptep, val);
 }
 
-static inline int kvm_pte_write(kvm_pte_t pte) { return pte & _PAGE_WRITE; }
-static inline int kvm_pte_dirty(kvm_pte_t pte) { return pte & _PAGE_DIRTY; }
 static inline int kvm_pte_young(kvm_pte_t pte) { return pte & _PAGE_ACCESSED; }
 static inline int kvm_pte_huge(kvm_pte_t pte) { return pte & _PAGE_HUGE; }
+static inline int kvm_pte_dirty(kvm_pte_t pte) { return pte & __WRITEABLE; }
+static inline int kvm_pte_writeable(kvm_pte_t pte) { return pte & KVM_PAGE_WRITEABLE; }
 
 static inline kvm_pte_t kvm_pte_mkyoung(kvm_pte_t pte)
 {
@@ -69,12 +76,12 @@ static inline kvm_pte_t kvm_pte_mkold(kvm_pte_t pte)
 
 static inline kvm_pte_t kvm_pte_mkdirty(kvm_pte_t pte)
 {
-	return pte | _PAGE_DIRTY;
+	return pte | __WRITEABLE;
 }
 
 static inline kvm_pte_t kvm_pte_mkclean(kvm_pte_t pte)
 {
-	return pte & ~_PAGE_DIRTY;
+	return pte & ~__WRITEABLE;
 }
 
 static inline kvm_pte_t kvm_pte_mkhuge(kvm_pte_t pte)
@@ -87,6 +94,11 @@ static inline kvm_pte_t kvm_pte_mksmall(kvm_pte_t pte)
 	return pte & ~_PAGE_HUGE;
 }
 
+static inline kvm_pte_t kvm_pte_mkwriteable(kvm_pte_t pte)
+{
+	return pte | KVM_PAGE_WRITEABLE;
+}
+
 static inline int kvm_need_flush(kvm_ptw_ctx *ctx)
 {
 	return ctx->flag & _KVM_FLUSH_PGTABLE;
diff --git a/arch/loongarch/include/asm/stackframe.h b/arch/loongarch/include/asm/stackframe.h
index 3eda298702b1..5cb568a60cf8 100644
--- a/arch/loongarch/include/asm/stackframe.h
+++ b/arch/loongarch/include/asm/stackframe.h
@@ -58,7 +58,7 @@
 	.endm
 
 	.macro STACKLEAK_ERASE
-#ifdef CONFIG_GCC_PLUGIN_STACKLEAK
+#ifdef CONFIG_KSTACK_ERASE
 	bl	stackleak_erase_on_task_stack
 #endif
 	.endm
diff --git a/arch/loongarch/include/asm/thread_info.h b/arch/loongarch/include/asm/thread_info.h
index 9dfa2ef00816..4d7117fcdc78 100644
--- a/arch/loongarch/include/asm/thread_info.h
+++ b/arch/loongarch/include/asm/thread_info.h
@@ -65,50 +65,42 @@ register unsigned long current_stack_pointer __asm__("$sp");
  *   access
  * - pending work-to-be-done flags are in LSW
  * - other flags in MSW
+ *
+ * Tell the generic TIF infrastructure which special bits loongarch supports
  */
-#define TIF_NEED_RESCHED	0	/* rescheduling necessary */
-#define TIF_NEED_RESCHED_LAZY	1	/* lazy rescheduling necessary */
-#define TIF_SIGPENDING		2	/* signal pending */
-#define TIF_NOTIFY_RESUME	3	/* callback before returning to user */
-#define TIF_NOTIFY_SIGNAL	4	/* signal notifications exist */
-#define TIF_RESTORE_SIGMASK	5	/* restore signal mask in do_signal() */
-#define TIF_NOHZ		6	/* in adaptive nohz mode */
-#define TIF_UPROBE		7	/* breakpointed or singlestepping */
-#define TIF_USEDFPU		8	/* FPU was used by this task this quantum (SMP) */
-#define TIF_USEDSIMD		9	/* SIMD has been used this quantum */
-#define TIF_MEMDIE		10	/* is terminating due to OOM killer */
-#define TIF_FIXADE		11	/* Fix address errors in software */
-#define TIF_LOGADE		12	/* Log address errors to syslog */
-#define TIF_32BIT_REGS		13	/* 32-bit general purpose registers */
-#define TIF_32BIT_ADDR		14	/* 32-bit address space */
-#define TIF_LOAD_WATCH		15	/* If set, load watch registers */
-#define TIF_SINGLESTEP		16	/* Single Step */
-#define TIF_LSX_CTX_LIVE	17	/* LSX context must be preserved */
-#define TIF_LASX_CTX_LIVE	18	/* LASX context must be preserved */
-#define TIF_USEDLBT		19	/* LBT was used by this task this quantum (SMP) */
-#define TIF_LBT_CTX_LIVE	20	/* LBT context must be preserved */
-#define TIF_PATCH_PENDING	21	/* pending live patching update */
+#define HAVE_TIF_NEED_RESCHED_LAZY
+#define HAVE_TIF_RESTORE_SIGMASK
+
+#include <asm-generic/thread_info_tif.h>
+
+/* Architecture specific bits */
+#define TIF_NOHZ		16	/* in adaptive nohz mode */
+#define TIF_USEDFPU		17	/* FPU was used by this task this quantum (SMP) */
+#define TIF_USEDSIMD		18	/* SIMD has been used this quantum */
+#define TIF_FIXADE		19	/* Fix address errors in software */
+#define TIF_LOGADE		20	/* Log address errors to syslog */
+#define TIF_32BIT_REGS		21	/* 32-bit general purpose registers */
+#define TIF_32BIT_ADDR		22	/* 32-bit address space */
+#define TIF_LOAD_WATCH		23	/* If set, load watch registers */
+#define TIF_SINGLESTEP		24	/* Single Step */
+#define TIF_LSX_CTX_LIVE	25	/* LSX context must be preserved */
+#define TIF_LASX_CTX_LIVE	26	/* LASX context must be preserved */
+#define TIF_USEDLBT		27	/* LBT was used by this task this quantum (SMP) */
+#define TIF_LBT_CTX_LIVE	28	/* LBT context must be preserved */
 
-#define _TIF_NEED_RESCHED	(1<<TIF_NEED_RESCHED)
-#define _TIF_NEED_RESCHED_LAZY	(1<<TIF_NEED_RESCHED_LAZY)
-#define _TIF_SIGPENDING		(1<<TIF_SIGPENDING)
-#define _TIF_NOTIFY_RESUME	(1<<TIF_NOTIFY_RESUME)
-#define _TIF_NOTIFY_SIGNAL	(1<<TIF_NOTIFY_SIGNAL)
-#define _TIF_NOHZ		(1<<TIF_NOHZ)
-#define _TIF_UPROBE		(1<<TIF_UPROBE)
-#define _TIF_USEDFPU		(1<<TIF_USEDFPU)
-#define _TIF_USEDSIMD		(1<<TIF_USEDSIMD)
-#define _TIF_FIXADE		(1<<TIF_FIXADE)
-#define _TIF_LOGADE		(1<<TIF_LOGADE)
-#define _TIF_32BIT_REGS		(1<<TIF_32BIT_REGS)
-#define _TIF_32BIT_ADDR		(1<<TIF_32BIT_ADDR)
-#define _TIF_LOAD_WATCH		(1<<TIF_LOAD_WATCH)
-#define _TIF_SINGLESTEP		(1<<TIF_SINGLESTEP)
-#define _TIF_LSX_CTX_LIVE	(1<<TIF_LSX_CTX_LIVE)
-#define _TIF_LASX_CTX_LIVE	(1<<TIF_LASX_CTX_LIVE)
-#define _TIF_USEDLBT		(1<<TIF_USEDLBT)
-#define _TIF_LBT_CTX_LIVE	(1<<TIF_LBT_CTX_LIVE)
-#define _TIF_PATCH_PENDING	(1<<TIF_PATCH_PENDING)
+#define _TIF_NOHZ		BIT(TIF_NOHZ)
+#define _TIF_USEDFPU		BIT(TIF_USEDFPU)
+#define _TIF_USEDSIMD		BIT(TIF_USEDSIMD)
+#define _TIF_FIXADE		BIT(TIF_FIXADE)
+#define _TIF_LOGADE		BIT(TIF_LOGADE)
+#define _TIF_32BIT_REGS		BIT(TIF_32BIT_REGS)
+#define _TIF_32BIT_ADDR		BIT(TIF_32BIT_ADDR)
+#define _TIF_LOAD_WATCH		BIT(TIF_LOAD_WATCH)
+#define _TIF_SINGLESTEP		BIT(TIF_SINGLESTEP)
+#define _TIF_LSX_CTX_LIVE	BIT(TIF_LSX_CTX_LIVE)
+#define _TIF_LASX_CTX_LIVE	BIT(TIF_LASX_CTX_LIVE)
+#define _TIF_USEDLBT		BIT(TIF_USEDLBT)
+#define _TIF_LBT_CTX_LIVE	BIT(TIF_LBT_CTX_LIVE)
 
 #endif /* __KERNEL__ */
 #endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/loongarch/include/uapi/asm/setup.h b/arch/loongarch/include/uapi/asm/setup.h
new file mode 100644
index 000000000000..d46363ce3e02
--- /dev/null
+++ b/arch/loongarch/include/uapi/asm/setup.h
@@ -0,0 +1,8 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+
+#ifndef _UAPI_ASM_LOONGARCH_SETUP_H
+#define _UAPI_ASM_LOONGARCH_SETUP_H
+
+#define COMMAND_LINE_SIZE	4096
+
+#endif /* _UAPI_ASM_LOONGARCH_SETUP_H */
diff --git a/arch/loongarch/kernel/asm-offsets.c b/arch/loongarch/kernel/asm-offsets.c
index db1e4bb26b6a..3017c7157600 100644
--- a/arch/loongarch/kernel/asm-offsets.c
+++ b/arch/loongarch/kernel/asm-offsets.c
@@ -4,6 +4,8 @@
  *
  * Copyright (C) 2020-2022 Loongson Technology Corporation Limited
  */
+#define COMPILE_OFFSETS
+
 #include <linux/types.h>
 #include <linux/sched.h>
 #include <linux/mm.h>
diff --git a/arch/loongarch/kernel/env.c b/arch/loongarch/kernel/env.c
index c0a5dc9aeae2..23bd5ae2212c 100644
--- a/arch/loongarch/kernel/env.c
+++ b/arch/loongarch/kernel/env.c
@@ -86,7 +86,7 @@ late_initcall(fdt_cpu_clk_init);
 static ssize_t boardinfo_show(struct kobject *kobj,
 			      struct kobj_attribute *attr, char *buf)
 {
-	return sprintf(buf,
+	return sysfs_emit(buf,
 		"BIOS Information\n"
 		"Vendor\t\t\t: %s\n"
 		"Version\t\t\t: %s\n"
@@ -109,6 +109,8 @@ static int __init boardinfo_init(void)
 	struct kobject *loongson_kobj;
 
 	loongson_kobj = kobject_create_and_add("loongson", firmware_kobj);
+	if (!loongson_kobj)
+		return -ENOMEM;
 
 	return sysfs_create_file(loongson_kobj, &boardinfo_attr.attr);
 }
diff --git a/arch/loongarch/kernel/module-sections.c b/arch/loongarch/kernel/module-sections.c
index e2f30ff9afde..a43ba7f9f987 100644
--- a/arch/loongarch/kernel/module-sections.c
+++ b/arch/loongarch/kernel/module-sections.c
@@ -8,6 +8,7 @@
 #include <linux/module.h>
 #include <linux/moduleloader.h>
 #include <linux/ftrace.h>
+#include <linux/sort.h>
 
 Elf_Addr module_emit_got_entry(struct module *mod, Elf_Shdr *sechdrs, Elf_Addr val)
 {
@@ -61,39 +62,38 @@ Elf_Addr module_emit_plt_entry(struct module *mod, Elf_Shdr *sechdrs, Elf_Addr v
 	return (Elf_Addr)&plt[nr];
 }
 
-static int is_rela_equal(const Elf_Rela *x, const Elf_Rela *y)
-{
-	return x->r_info == y->r_info && x->r_addend == y->r_addend;
-}
+#define cmp_3way(a, b)  ((a) < (b) ? -1 : (a) > (b))
 
-static bool duplicate_rela(const Elf_Rela *rela, int idx)
+static int compare_rela(const void *x, const void *y)
 {
-	int i;
+	int ret;
+	const Elf_Rela *rela_x = x, *rela_y = y;
 
-	for (i = 0; i < idx; i++) {
-		if (is_rela_equal(&rela[i], &rela[idx]))
-			return true;
-	}
+	ret = cmp_3way(rela_x->r_info, rela_y->r_info);
+	if (ret == 0)
+		ret = cmp_3way(rela_x->r_addend, rela_y->r_addend);
 
-	return false;
+	return ret;
 }
 
 static void count_max_entries(Elf_Rela *relas, int num,
 			      unsigned int *plts, unsigned int *gots)
 {
-	unsigned int i, type;
+	unsigned int i;
+
+	sort(relas, num, sizeof(Elf_Rela), compare_rela, NULL);
 
 	for (i = 0; i < num; i++) {
-		type = ELF_R_TYPE(relas[i].r_info);
-		switch (type) {
+		if (i && !compare_rela(&relas[i-1], &relas[i]))
+			continue;
+
+		switch (ELF_R_TYPE(relas[i].r_info)) {
 		case R_LARCH_SOP_PUSH_PLT_PCREL:
 		case R_LARCH_B26:
-			if (!duplicate_rela(relas, i))
-				(*plts)++;
+			(*plts)++;
 			break;
 		case R_LARCH_GOT_PC_HI20:
-			if (!duplicate_rela(relas, i))
-				(*gots)++;
+			(*gots)++;
 			break;
 		default:
 			break; /* Do nothing. */
diff --git a/arch/loongarch/kernel/process.c b/arch/loongarch/kernel/process.c
index 3582f591bab2..efd9edf65603 100644
--- a/arch/loongarch/kernel/process.c
+++ b/arch/loongarch/kernel/process.c
@@ -167,7 +167,7 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 	unsigned long childksp;
 	unsigned long tls = args->tls;
 	unsigned long usp = args->stack;
-	unsigned long clone_flags = args->flags;
+	u64 clone_flags = args->flags;
 	struct pt_regs *childregs, *regs = current_pt_regs();
 
 	childksp = (unsigned long)task_stack_page(p) + THREAD_SIZE;
diff --git a/arch/loongarch/kernel/signal.c b/arch/loongarch/kernel/signal.c
index 4740cb5b2388..c9f7ca778364 100644
--- a/arch/loongarch/kernel/signal.c
+++ b/arch/loongarch/kernel/signal.c
@@ -677,6 +677,11 @@ static int setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc,
 	for (i = 1; i < 32; i++)
 		err |= __put_user(regs->regs[i], &sc->sc_regs[i]);
 
+#ifdef CONFIG_CPU_HAS_LBT
+	if (extctx->lbt.addr)
+		err |= protected_save_lbt_context(extctx);
+#endif
+
 	if (extctx->lasx.addr)
 		err |= protected_save_lasx_context(extctx);
 	else if (extctx->lsx.addr)
@@ -684,11 +689,6 @@ static int setup_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc,
 	else if (extctx->fpu.addr)
 		err |= protected_save_fpu_context(extctx);
 
-#ifdef CONFIG_CPU_HAS_LBT
-	if (extctx->lbt.addr)
-		err |= protected_save_lbt_context(extctx);
-#endif
-
 	/* Set the "end" magic */
 	info = (struct sctx_info *)extctx->end.addr;
 	err |= __put_user(0, &info->magic);
diff --git a/arch/loongarch/kernel/stacktrace.c b/arch/loongarch/kernel/stacktrace.c
index 9a038d1070d7..387dc4d3c486 100644
--- a/arch/loongarch/kernel/stacktrace.c
+++ b/arch/loongarch/kernel/stacktrace.c
@@ -51,12 +51,13 @@ int arch_stack_walk_reliable(stack_trace_consume_fn consume_entry,
 	if (task == current) {
 		regs->regs[3] = (unsigned long)__builtin_frame_address(0);
 		regs->csr_era = (unsigned long)__builtin_return_address(0);
+		regs->regs[22] = 0;
 	} else {
 		regs->regs[3] = thread_saved_fp(task);
 		regs->csr_era = thread_saved_ra(task);
+		regs->regs[22] = task->thread.reg22;
 	}
 	regs->regs[1] = 0;
-	regs->regs[22] = 0;
 
 	for (unwind_start(&state, task, regs);
 	     !unwind_done(&state) && !unwind_error(&state); unwind_next_frame(&state)) {
diff --git a/arch/loongarch/kernel/time.c b/arch/loongarch/kernel/time.c
index 367906b10f81..6fb92cc1a4c9 100644
--- a/arch/loongarch/kernel/time.c
+++ b/arch/loongarch/kernel/time.c
@@ -5,6 +5,7 @@
  * Copyright (C) 2020-2022 Loongson Technology Corporation Limited
  */
 #include <linux/clockchips.h>
+#include <linux/cpuhotplug.h>
 #include <linux/delay.h>
 #include <linux/export.h>
 #include <linux/init.h>
@@ -102,6 +103,21 @@ static int constant_timer_next_event(unsigned long delta, struct clock_event_dev
 	return 0;
 }
 
+static int arch_timer_starting(unsigned int cpu)
+{
+	set_csr_ecfg(ECFGF_TIMER);
+
+	return 0;
+}
+
+static int arch_timer_dying(unsigned int cpu)
+{
+	/* Clear Timer Interrupt */
+	write_csr_tintclear(CSR_TINTCLR_TI);
+
+	return 0;
+}
+
 static unsigned long get_loops_per_jiffy(void)
 {
 	unsigned long lpj = (unsigned long)const_clock_freq;
@@ -172,6 +188,10 @@ int constant_clockevent_init(void)
 	lpj_fine = get_loops_per_jiffy();
 	pr_info("Constant clock event device register\n");
 
+	cpuhp_setup_state(CPUHP_AP_LOONGARCH_ARCH_TIMER_STARTING,
+			  "clockevents/loongarch/timer:starting",
+			  arch_timer_starting, arch_timer_dying);
+
 	return 0;
 }
 
diff --git a/arch/loongarch/kernel/vdso.c b/arch/loongarch/kernel/vdso.c
index 7b888d9085a0..dee1a15d7f4c 100644
--- a/arch/loongarch/kernel/vdso.c
+++ b/arch/loongarch/kernel/vdso.c
@@ -54,6 +54,9 @@ static int __init init_vdso(void)
 	vdso_info.code_mapping.pages =
 		kcalloc(vdso_info.size / PAGE_SIZE, sizeof(struct page *), GFP_KERNEL);
 
+	if (!vdso_info.code_mapping.pages)
+		return -ENOMEM;
+
 	pfn = __phys_to_pfn(__pa_symbol(vdso_info.vdso));
 	for (i = 0; i < vdso_info.size / PAGE_SIZE; i++)
 		vdso_info.code_mapping.pages[i] = pfn_to_page(pfn + i);
diff --git a/arch/loongarch/kvm/exit.c b/arch/loongarch/kvm/exit.c
index 2ce41f93b2a4..6c9c7de7226b 100644
--- a/arch/loongarch/kvm/exit.c
+++ b/arch/loongarch/kvm/exit.c
@@ -778,10 +778,8 @@ static long kvm_save_notify(struct kvm_vcpu *vcpu)
 		return 0;
 	default:
 		return KVM_HCALL_INVALID_CODE;
-	};
-
-	return KVM_HCALL_INVALID_CODE;
-};
+	}
+}
 
 /*
  * kvm_handle_lsx_disabled() - Guest used LSX while disabled in root.
diff --git a/arch/loongarch/kvm/intc/eiointc.c b/arch/loongarch/kvm/intc/eiointc.c
index a3a12af9ecbf..c32333695381 100644
--- a/arch/loongarch/kvm/intc/eiointc.c
+++ b/arch/loongarch/kvm/intc/eiointc.c
@@ -45,7 +45,12 @@ static void eiointc_update_irq(struct loongarch_eiointc *s, int irq, int level)
 	}
 
 	cpu = s->sw_coremap[irq];
-	vcpu = kvm_get_vcpu(s->kvm, cpu);
+	vcpu = kvm_get_vcpu_by_id(s->kvm, cpu);
+	if (unlikely(vcpu == NULL)) {
+		kvm_err("%s: invalid target cpu: %d\n", __func__, cpu);
+		return;
+	}
+
 	if (level) {
 		/* if not enable return false */
 		if (!test_bit(irq, (unsigned long *)s->enable.reg_u32))
@@ -421,21 +426,26 @@ static int kvm_eiointc_ctrl_access(struct kvm_device *dev,
 	struct loongarch_eiointc *s = dev->kvm->arch.eiointc;
 
 	data = (void __user *)attr->addr;
-	spin_lock_irqsave(&s->lock, flags);
 	switch (type) {
 	case KVM_DEV_LOONGARCH_EXTIOI_CTRL_INIT_NUM_CPU:
+	case KVM_DEV_LOONGARCH_EXTIOI_CTRL_INIT_FEATURE:
 		if (copy_from_user(&val, data, 4))
-			ret = -EFAULT;
-		else {
-			if (val >= EIOINTC_ROUTE_MAX_VCPUS)
-				ret = -EINVAL;
-			else
-				s->num_cpu = val;
-		}
+			return -EFAULT;
+		break;
+	default:
+		break;
+	}
+
+	spin_lock_irqsave(&s->lock, flags);
+	switch (type) {
+	case KVM_DEV_LOONGARCH_EXTIOI_CTRL_INIT_NUM_CPU:
+		if (val >= EIOINTC_ROUTE_MAX_VCPUS)
+			ret = -EINVAL;
+		else
+			s->num_cpu = val;
 		break;
 	case KVM_DEV_LOONGARCH_EXTIOI_CTRL_INIT_FEATURE:
-		if (copy_from_user(&s->features, data, 4))
-			ret = -EFAULT;
+		s->features = val;
 		if (!(s->features & BIT(EIOINTC_HAS_VIRT_EXTENSION)))
 			s->status |= BIT(EIOINTC_ENABLE);
 		break;
@@ -457,19 +467,17 @@ static int kvm_eiointc_ctrl_access(struct kvm_device *dev,
 
 static int kvm_eiointc_regs_access(struct kvm_device *dev,
 					struct kvm_device_attr *attr,
-					bool is_write)
+					bool is_write, int *data)
 {
 	int addr, cpu, offset, ret = 0;
 	unsigned long flags;
 	void *p = NULL;
-	void __user *data;
 	struct loongarch_eiointc *s;
 
 	s = dev->kvm->arch.eiointc;
 	addr = attr->attr;
 	cpu = addr >> 16;
 	addr &= 0xffff;
-	data = (void __user *)attr->addr;
 	switch (addr) {
 	case EIOINTC_NODETYPE_START ... EIOINTC_NODETYPE_END:
 		offset = (addr - EIOINTC_NODETYPE_START) / 4;
@@ -508,13 +516,10 @@ static int kvm_eiointc_regs_access(struct kvm_device *dev,
 	}
 
 	spin_lock_irqsave(&s->lock, flags);
-	if (is_write) {
-		if (copy_from_user(p, data, 4))
-			ret = -EFAULT;
-	} else {
-		if (copy_to_user(data, p, 4))
-			ret = -EFAULT;
-	}
+	if (is_write)
+		memcpy(p, data, 4);
+	else
+		memcpy(data, p, 4);
 	spin_unlock_irqrestore(&s->lock, flags);
 
 	return ret;
@@ -522,19 +527,17 @@ static int kvm_eiointc_regs_access(struct kvm_device *dev,
 
 static int kvm_eiointc_sw_status_access(struct kvm_device *dev,
 					struct kvm_device_attr *attr,
-					bool is_write)
+					bool is_write, int *data)
 {
 	int addr, ret = 0;
 	unsigned long flags;
 	void *p = NULL;
-	void __user *data;
 	struct loongarch_eiointc *s;
 
 	s = dev->kvm->arch.eiointc;
 	addr = attr->attr;
 	addr &= 0xffff;
 
-	data = (void __user *)attr->addr;
 	switch (addr) {
 	case KVM_DEV_LOONGARCH_EXTIOI_SW_STATUS_NUM_CPU:
 		if (is_write)
@@ -556,13 +559,10 @@ static int kvm_eiointc_sw_status_access(struct kvm_device *dev,
 		return -EINVAL;
 	}
 	spin_lock_irqsave(&s->lock, flags);
-	if (is_write) {
-		if (copy_from_user(p, data, 4))
-			ret = -EFAULT;
-	} else {
-		if (copy_to_user(data, p, 4))
-			ret = -EFAULT;
-	}
+	if (is_write)
+		memcpy(p, data, 4);
+	else
+		memcpy(data, p, 4);
 	spin_unlock_irqrestore(&s->lock, flags);
 
 	return ret;
@@ -571,11 +571,27 @@ static int kvm_eiointc_sw_status_access(struct kvm_device *dev,
 static int kvm_eiointc_get_attr(struct kvm_device *dev,
 				struct kvm_device_attr *attr)
 {
+	int ret, data;
+
 	switch (attr->group) {
 	case KVM_DEV_LOONGARCH_EXTIOI_GRP_REGS:
-		return kvm_eiointc_regs_access(dev, attr, false);
+		ret = kvm_eiointc_regs_access(dev, attr, false, &data);
+		if (ret)
+			return ret;
+
+		if (copy_to_user((void __user *)attr->addr, &data, 4))
+			ret = -EFAULT;
+
+		return ret;
 	case KVM_DEV_LOONGARCH_EXTIOI_GRP_SW_STATUS:
-		return kvm_eiointc_sw_status_access(dev, attr, false);
+		ret = kvm_eiointc_sw_status_access(dev, attr, false, &data);
+		if (ret)
+			return ret;
+
+		if (copy_to_user((void __user *)attr->addr, &data, 4))
+			ret = -EFAULT;
+
+		return ret;
 	default:
 		return -EINVAL;
 	}
@@ -584,13 +600,21 @@ static int kvm_eiointc_get_attr(struct kvm_device *dev,
 static int kvm_eiointc_set_attr(struct kvm_device *dev,
 				struct kvm_device_attr *attr)
 {
+	int data;
+
 	switch (attr->group) {
 	case KVM_DEV_LOONGARCH_EXTIOI_GRP_CTRL:
 		return kvm_eiointc_ctrl_access(dev, attr);
 	case KVM_DEV_LOONGARCH_EXTIOI_GRP_REGS:
-		return kvm_eiointc_regs_access(dev, attr, true);
+		if (copy_from_user(&data, (void __user *)attr->addr, 4))
+			return -EFAULT;
+
+		return kvm_eiointc_regs_access(dev, attr, true, &data);
 	case KVM_DEV_LOONGARCH_EXTIOI_GRP_SW_STATUS:
-		return kvm_eiointc_sw_status_access(dev, attr, true);
+		if (copy_from_user(&data, (void __user *)attr->addr, 4))
+			return -EFAULT;
+
+		return kvm_eiointc_sw_status_access(dev, attr, true, &data);
 	default:
 		return -EINVAL;
 	}
diff --git a/arch/loongarch/kvm/intc/ipi.c b/arch/loongarch/kvm/intc/ipi.c
index e658d5b37c04..5a8481dda052 100644
--- a/arch/loongarch/kvm/intc/ipi.c
+++ b/arch/loongarch/kvm/intc/ipi.c
@@ -99,7 +99,7 @@ static void write_mailbox(struct kvm_vcpu *vcpu, int offset, uint64_t data, int
 static int send_ipi_data(struct kvm_vcpu *vcpu, gpa_t addr, uint64_t data)
 {
 	int i, idx, ret;
-	uint32_t val = 0, mask = 0;
+	uint64_t val = 0, mask = 0;
 
 	/*
 	 * Bit 27-30 is mask for byte writing.
@@ -108,7 +108,7 @@ static int send_ipi_data(struct kvm_vcpu *vcpu, gpa_t addr, uint64_t data)
 	if ((data >> 27) & 0xf) {
 		/* Read the old val */
 		idx = srcu_read_lock(&vcpu->kvm->srcu);
-		ret = kvm_io_bus_read(vcpu, KVM_IOCSR_BUS, addr, sizeof(val), &val);
+		ret = kvm_io_bus_read(vcpu, KVM_IOCSR_BUS, addr, 4, &val);
 		srcu_read_unlock(&vcpu->kvm->srcu, idx);
 		if (unlikely(ret)) {
 			kvm_err("%s: : read data from addr %llx failed\n", __func__, addr);
@@ -124,7 +124,7 @@ static int send_ipi_data(struct kvm_vcpu *vcpu, gpa_t addr, uint64_t data)
 	}
 	val |= ((uint32_t)(data >> 32) & ~mask);
 	idx = srcu_read_lock(&vcpu->kvm->srcu);
-	ret = kvm_io_bus_write(vcpu, KVM_IOCSR_BUS, addr, sizeof(val), &val);
+	ret = kvm_io_bus_write(vcpu, KVM_IOCSR_BUS, addr, 4, &val);
 	srcu_read_unlock(&vcpu->kvm->srcu, idx);
 	if (unlikely(ret))
 		kvm_err("%s: : write data to addr %llx failed\n", __func__, addr);
@@ -298,7 +298,7 @@ static int kvm_ipi_regs_access(struct kvm_device *dev,
 	cpu = (attr->attr >> 16) & 0x3ff;
 	addr = attr->attr & 0xff;
 
-	vcpu = kvm_get_vcpu(dev->kvm, cpu);
+	vcpu = kvm_get_vcpu_by_id(dev->kvm, cpu);
 	if (unlikely(vcpu == NULL)) {
 		kvm_err("%s: invalid target cpu: %d\n", __func__, cpu);
 		return -EINVAL;
diff --git a/arch/loongarch/kvm/intc/pch_pic.c b/arch/loongarch/kvm/intc/pch_pic.c
index 6f00ffe05c54..baf3b4faf7ea 100644
--- a/arch/loongarch/kvm/intc/pch_pic.c
+++ b/arch/loongarch/kvm/intc/pch_pic.c
@@ -195,6 +195,11 @@ static int kvm_pch_pic_read(struct kvm_vcpu *vcpu,
 		return -EINVAL;
 	}
 
+	if (addr & (len - 1)) {
+		kvm_err("%s: pch pic not aligned addr %llx len %d\n", __func__, addr, len);
+		return -EINVAL;
+	}
+
 	/* statistics of pch pic reading */
 	vcpu->stat.pch_pic_read_exits++;
 	ret = loongarch_pch_pic_read(s, addr, len, val);
@@ -302,6 +307,11 @@ static int kvm_pch_pic_write(struct kvm_vcpu *vcpu,
 		return -EINVAL;
 	}
 
+	if (addr & (len - 1)) {
+		kvm_err("%s: pch pic not aligned addr %llx len %d\n", __func__, addr, len);
+		return -EINVAL;
+	}
+
 	/* statistics of pch pic writing */
 	vcpu->stat.pch_pic_write_exits++;
 	ret = loongarch_pch_pic_write(s, addr, len, val);
@@ -338,6 +348,7 @@ static int kvm_pch_pic_regs_access(struct kvm_device *dev,
 				struct kvm_device_attr *attr,
 				bool is_write)
 {
+	char buf[8];
 	int addr, offset, len = 8, ret = 0;
 	void __user *data;
 	void *p = NULL;
@@ -387,17 +398,23 @@ static int kvm_pch_pic_regs_access(struct kvm_device *dev,
 		return -EINVAL;
 	}
 
-	spin_lock(&s->lock);
-	/* write or read value according to is_write */
 	if (is_write) {
-		if (copy_from_user(p, data, len))
-			ret = -EFAULT;
-	} else {
-		if (copy_to_user(data, p, len))
-			ret = -EFAULT;
+		if (copy_from_user(buf, data, len))
+			return -EFAULT;
 	}
+
+	spin_lock(&s->lock);
+	if (is_write)
+		memcpy(p, buf, len);
+	else
+		memcpy(buf, p, len);
 	spin_unlock(&s->lock);
 
+	if (!is_write) {
+		if (copy_to_user(data, buf, len))
+			return -EFAULT;
+	}
+
 	return ret;
 }
 
diff --git a/arch/loongarch/kvm/mmu.c b/arch/loongarch/kvm/mmu.c
index ed956c5cf2cc..7c8143e79c12 100644
--- a/arch/loongarch/kvm/mmu.c
+++ b/arch/loongarch/kvm/mmu.c
@@ -569,7 +569,7 @@ static int kvm_map_page_fast(struct kvm_vcpu *vcpu, unsigned long gpa, bool writ
 	/* Track access to pages marked old */
 	new = kvm_pte_mkyoung(*ptep);
 	if (write && !kvm_pte_dirty(new)) {
-		if (!kvm_pte_write(new)) {
+		if (!kvm_pte_writeable(new)) {
 			ret = -EFAULT;
 			goto out;
 		}
@@ -856,9 +856,9 @@ retry:
 		prot_bits |= _CACHE_SUC;
 
 	if (writeable) {
-		prot_bits |= _PAGE_WRITE;
+		prot_bits = kvm_pte_mkwriteable(prot_bits);
 		if (write)
-			prot_bits |= __WRITEABLE;
+			prot_bits = kvm_pte_mkdirty(prot_bits);
 	}
 
 	/* Disable dirty logging on HugePages */
@@ -904,7 +904,7 @@ retry:
 	kvm_release_faultin_page(kvm, page, false, writeable);
 	spin_unlock(&kvm->mmu_lock);
 
-	if (prot_bits & _PAGE_DIRTY)
+	if (kvm_pte_dirty(prot_bits))
 		mark_page_dirty_in_slot(kvm, memslot, gfn);
 
 out:
diff --git a/arch/loongarch/kvm/vcpu.c b/arch/loongarch/kvm/vcpu.c
index d1b8c50941ca..ce478151466c 100644
--- a/arch/loongarch/kvm/vcpu.c
+++ b/arch/loongarch/kvm/vcpu.c
@@ -1283,9 +1283,11 @@ int kvm_own_lbt(struct kvm_vcpu *vcpu)
 		return -EINVAL;
 
 	preempt_disable();
-	set_csr_euen(CSR_EUEN_LBTEN);
-	_restore_lbt(&vcpu->arch.lbt);
-	vcpu->arch.aux_inuse |= KVM_LARCH_LBT;
+	if (!(vcpu->arch.aux_inuse & KVM_LARCH_LBT)) {
+		set_csr_euen(CSR_EUEN_LBTEN);
+		_restore_lbt(&vcpu->arch.lbt);
+		vcpu->arch.aux_inuse |= KVM_LARCH_LBT;
+	}
 	preempt_enable();
 
 	return 0;
diff --git a/arch/m68k/configs/amiga_defconfig b/arch/m68k/configs/amiga_defconfig
index 5171bb183967..fba8089c9fb3 100644
--- a/arch/m68k/configs/amiga_defconfig
+++ b/arch/m68k/configs/amiga_defconfig
@@ -125,6 +125,7 @@ CONFIG_NFT_FIB_NETDEV=m
 CONFIG_NFT_REJECT_NETDEV=m
 CONFIG_NF_FLOW_TABLE_INET=m
 CONFIG_NF_FLOW_TABLE=m
+CONFIG_NETFILTER_XTABLES_LEGACY=y
 CONFIG_NETFILTER_XT_SET=m
 CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@@ -206,14 +207,12 @@ CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_SYNPROXY=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -233,10 +232,8 @@ CONFIG_IP6_NF_MATCH_RPFILTER=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_SRH=m
 CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_TARGET_SYNPROXY=m
-CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP6_NF_NAT=m
 CONFIG_IP6_NF_TARGET_MASQUERADE=m
@@ -245,6 +242,7 @@ CONFIG_NF_TABLES_BRIDGE=m
 CONFIG_NFT_BRIDGE_META=m
 CONFIG_NFT_BRIDGE_REJECT=m
 CONFIG_NF_CONNTRACK_BRIDGE=m
+CONFIG_BRIDGE_NF_EBTABLES_LEGACY=m
 CONFIG_BRIDGE_NF_EBTABLES=m
 CONFIG_BRIDGE_EBT_BROUTE=m
 CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -309,7 +307,6 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_DRBD=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
-CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
 CONFIG_DUMMY_IRQ=m
 CONFIG_RAID_ATTRS=m
@@ -454,7 +451,6 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 CONFIG_BTRFS_FS=m
-CONFIG_BCACHEFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -560,7 +556,6 @@ CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_ECDSA=m
 CONFIG_CRYPTO_ECRDSA=m
-CONFIG_CRYPTO_CURVE25519=m
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
@@ -605,6 +600,7 @@ CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
 CONFIG_PRIME_NUMBERS=m
+CONFIG_CRC_BENCHMARK=y
 CONFIG_XZ_DEC_TEST=m
 CONFIG_GLOB_SELFTEST=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
@@ -636,7 +632,6 @@ CONFIG_FIND_BIT_BENCHMARK=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_SYSCTL=m
 CONFIG_LINEAR_RANGES_TEST=m
-CONFIG_CRC_BENCHMARK=y
 CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_TEST_KMOD=m
diff --git a/arch/m68k/configs/apollo_defconfig b/arch/m68k/configs/apollo_defconfig
index 16f343ae48c6..6af37716384c 100644
--- a/arch/m68k/configs/apollo_defconfig
+++ b/arch/m68k/configs/apollo_defconfig
@@ -121,6 +121,7 @@ CONFIG_NFT_FIB_NETDEV=m
 CONFIG_NFT_REJECT_NETDEV=m
 CONFIG_NF_FLOW_TABLE_INET=m
 CONFIG_NF_FLOW_TABLE=m
+CONFIG_NETFILTER_XTABLES_LEGACY=y
 CONFIG_NETFILTER_XT_SET=m
 CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@@ -202,14 +203,12 @@ CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_SYNPROXY=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -229,10 +228,8 @@ CONFIG_IP6_NF_MATCH_RPFILTER=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_SRH=m
 CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_TARGET_SYNPROXY=m
-CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP6_NF_NAT=m
 CONFIG_IP6_NF_TARGET_MASQUERADE=m
@@ -241,6 +238,7 @@ CONFIG_NF_TABLES_BRIDGE=m
 CONFIG_NFT_BRIDGE_META=m
 CONFIG_NFT_BRIDGE_REJECT=m
 CONFIG_NF_CONNTRACK_BRIDGE=m
+CONFIG_BRIDGE_NF_EBTABLES_LEGACY=m
 CONFIG_BRIDGE_NF_EBTABLES=m
 CONFIG_BRIDGE_EBT_BROUTE=m
 CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -299,7 +297,6 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_DRBD=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
-CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
 CONFIG_DUMMY_IRQ=m
 CONFIG_RAID_ATTRS=m
@@ -411,7 +408,6 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 CONFIG_BTRFS_FS=m
-CONFIG_BCACHEFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -517,7 +513,6 @@ CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_ECDSA=m
 CONFIG_CRYPTO_ECRDSA=m
-CONFIG_CRYPTO_CURVE25519=m
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
@@ -562,6 +557,7 @@ CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
 CONFIG_PRIME_NUMBERS=m
+CONFIG_CRC_BENCHMARK=y
 CONFIG_XZ_DEC_TEST=m
 CONFIG_GLOB_SELFTEST=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
@@ -593,7 +589,6 @@ CONFIG_FIND_BIT_BENCHMARK=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_SYSCTL=m
 CONFIG_LINEAR_RANGES_TEST=m
-CONFIG_CRC_BENCHMARK=y
 CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_TEST_KMOD=m
diff --git a/arch/m68k/configs/atari_defconfig b/arch/m68k/configs/atari_defconfig
index c08788728ea9..471f4ec3730d 100644
--- a/arch/m68k/configs/atari_defconfig
+++ b/arch/m68k/configs/atari_defconfig
@@ -128,6 +128,7 @@ CONFIG_NFT_FIB_NETDEV=m
 CONFIG_NFT_REJECT_NETDEV=m
 CONFIG_NF_FLOW_TABLE_INET=m
 CONFIG_NF_FLOW_TABLE=m
+CONFIG_NETFILTER_XTABLES_LEGACY=y
 CONFIG_NETFILTER_XT_SET=m
 CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@@ -209,14 +210,12 @@ CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_SYNPROXY=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -236,10 +235,8 @@ CONFIG_IP6_NF_MATCH_RPFILTER=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_SRH=m
 CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_TARGET_SYNPROXY=m
-CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP6_NF_NAT=m
 CONFIG_IP6_NF_TARGET_MASQUERADE=m
@@ -248,6 +245,7 @@ CONFIG_NF_TABLES_BRIDGE=m
 CONFIG_NFT_BRIDGE_META=m
 CONFIG_NFT_BRIDGE_REJECT=m
 CONFIG_NF_CONNTRACK_BRIDGE=m
+CONFIG_BRIDGE_NF_EBTABLES_LEGACY=m
 CONFIG_BRIDGE_NF_EBTABLES=m
 CONFIG_BRIDGE_EBT_BROUTE=m
 CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -310,7 +308,6 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_DRBD=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
-CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
 CONFIG_DUMMY_IRQ=m
 CONFIG_RAID_ATTRS=m
@@ -431,7 +428,6 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 CONFIG_BTRFS_FS=m
-CONFIG_BCACHEFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -537,7 +533,6 @@ CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_ECDSA=m
 CONFIG_CRYPTO_ECRDSA=m
-CONFIG_CRYPTO_CURVE25519=m
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
@@ -582,6 +577,7 @@ CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
 CONFIG_PRIME_NUMBERS=m
+CONFIG_CRC_BENCHMARK=y
 CONFIG_XZ_DEC_TEST=m
 CONFIG_GLOB_SELFTEST=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
@@ -613,7 +609,6 @@ CONFIG_FIND_BIT_BENCHMARK=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_SYSCTL=m
 CONFIG_LINEAR_RANGES_TEST=m
-CONFIG_CRC_BENCHMARK=y
 CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_TEST_KMOD=m
diff --git a/arch/m68k/configs/bvme6000_defconfig b/arch/m68k/configs/bvme6000_defconfig
index 962497e7c53f..28492ef51457 100644
--- a/arch/m68k/configs/bvme6000_defconfig
+++ b/arch/m68k/configs/bvme6000_defconfig
@@ -118,6 +118,7 @@ CONFIG_NFT_FIB_NETDEV=m
 CONFIG_NFT_REJECT_NETDEV=m
 CONFIG_NF_FLOW_TABLE_INET=m
 CONFIG_NF_FLOW_TABLE=m
+CONFIG_NETFILTER_XTABLES_LEGACY=y
 CONFIG_NETFILTER_XT_SET=m
 CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@@ -199,14 +200,12 @@ CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_SYNPROXY=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -226,10 +225,8 @@ CONFIG_IP6_NF_MATCH_RPFILTER=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_SRH=m
 CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_TARGET_SYNPROXY=m
-CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP6_NF_NAT=m
 CONFIG_IP6_NF_TARGET_MASQUERADE=m
@@ -238,6 +235,7 @@ CONFIG_NF_TABLES_BRIDGE=m
 CONFIG_NFT_BRIDGE_META=m
 CONFIG_NFT_BRIDGE_REJECT=m
 CONFIG_NF_CONNTRACK_BRIDGE=m
+CONFIG_BRIDGE_NF_EBTABLES_LEGACY=m
 CONFIG_BRIDGE_NF_EBTABLES=m
 CONFIG_BRIDGE_EBT_BROUTE=m
 CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -296,7 +294,6 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_DRBD=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
-CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
 CONFIG_DUMMY_IRQ=m
 CONFIG_RAID_ATTRS=m
@@ -403,7 +400,6 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 CONFIG_BTRFS_FS=m
-CONFIG_BCACHEFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -509,7 +505,6 @@ CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_ECDSA=m
 CONFIG_CRYPTO_ECRDSA=m
-CONFIG_CRYPTO_CURVE25519=m
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
@@ -554,6 +549,7 @@ CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
 CONFIG_PRIME_NUMBERS=m
+CONFIG_CRC_BENCHMARK=y
 CONFIG_XZ_DEC_TEST=m
 CONFIG_GLOB_SELFTEST=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
@@ -585,7 +581,6 @@ CONFIG_FIND_BIT_BENCHMARK=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_SYSCTL=m
 CONFIG_LINEAR_RANGES_TEST=m
-CONFIG_CRC_BENCHMARK=y
 CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_TEST_KMOD=m
diff --git a/arch/m68k/configs/hp300_defconfig b/arch/m68k/configs/hp300_defconfig
index ec28650189e4..2fbefb16b72e 100644
--- a/arch/m68k/configs/hp300_defconfig
+++ b/arch/m68k/configs/hp300_defconfig
@@ -120,6 +120,7 @@ CONFIG_NFT_FIB_NETDEV=m
 CONFIG_NFT_REJECT_NETDEV=m
 CONFIG_NF_FLOW_TABLE_INET=m
 CONFIG_NF_FLOW_TABLE=m
+CONFIG_NETFILTER_XTABLES_LEGACY=y
 CONFIG_NETFILTER_XT_SET=m
 CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@@ -201,14 +202,12 @@ CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_SYNPROXY=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -228,10 +227,8 @@ CONFIG_IP6_NF_MATCH_RPFILTER=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_SRH=m
 CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_TARGET_SYNPROXY=m
-CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP6_NF_NAT=m
 CONFIG_IP6_NF_TARGET_MASQUERADE=m
@@ -240,6 +237,7 @@ CONFIG_NF_TABLES_BRIDGE=m
 CONFIG_NFT_BRIDGE_META=m
 CONFIG_NFT_BRIDGE_REJECT=m
 CONFIG_NF_CONNTRACK_BRIDGE=m
+CONFIG_BRIDGE_NF_EBTABLES_LEGACY=m
 CONFIG_BRIDGE_NF_EBTABLES=m
 CONFIG_BRIDGE_EBT_BROUTE=m
 CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -298,7 +296,6 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_DRBD=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
-CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
 CONFIG_DUMMY_IRQ=m
 CONFIG_RAID_ATTRS=m
@@ -413,7 +410,6 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 CONFIG_BTRFS_FS=m
-CONFIG_BCACHEFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -519,7 +515,6 @@ CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_ECDSA=m
 CONFIG_CRYPTO_ECRDSA=m
-CONFIG_CRYPTO_CURVE25519=m
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
@@ -564,6 +559,7 @@ CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
 CONFIG_PRIME_NUMBERS=m
+CONFIG_CRC_BENCHMARK=y
 CONFIG_XZ_DEC_TEST=m
 CONFIG_GLOB_SELFTEST=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
@@ -595,7 +591,6 @@ CONFIG_FIND_BIT_BENCHMARK=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_SYSCTL=m
 CONFIG_LINEAR_RANGES_TEST=m
-CONFIG_CRC_BENCHMARK=y
 CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_TEST_KMOD=m
diff --git a/arch/m68k/configs/mac_defconfig b/arch/m68k/configs/mac_defconfig
index 0afb3ad180de..deec5df3f35a 100644
--- a/arch/m68k/configs/mac_defconfig
+++ b/arch/m68k/configs/mac_defconfig
@@ -119,6 +119,7 @@ CONFIG_NFT_FIB_NETDEV=m
 CONFIG_NFT_REJECT_NETDEV=m
 CONFIG_NF_FLOW_TABLE_INET=m
 CONFIG_NF_FLOW_TABLE=m
+CONFIG_NETFILTER_XTABLES_LEGACY=y
 CONFIG_NETFILTER_XT_SET=m
 CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@@ -200,14 +201,12 @@ CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_SYNPROXY=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -227,10 +226,8 @@ CONFIG_IP6_NF_MATCH_RPFILTER=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_SRH=m
 CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_TARGET_SYNPROXY=m
-CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP6_NF_NAT=m
 CONFIG_IP6_NF_TARGET_MASQUERADE=m
@@ -239,6 +236,7 @@ CONFIG_NF_TABLES_BRIDGE=m
 CONFIG_NFT_BRIDGE_META=m
 CONFIG_NFT_BRIDGE_REJECT=m
 CONFIG_NF_CONNTRACK_BRIDGE=m
+CONFIG_BRIDGE_NF_EBTABLES_LEGACY=m
 CONFIG_BRIDGE_NF_EBTABLES=m
 CONFIG_BRIDGE_EBT_BROUTE=m
 CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -298,7 +296,6 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_DRBD=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
-CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
 CONFIG_DUMMY_IRQ=m
 CONFIG_RAID_ATTRS=m
@@ -430,7 +427,6 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 CONFIG_BTRFS_FS=m
-CONFIG_BCACHEFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -536,7 +532,6 @@ CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_ECDSA=m
 CONFIG_CRYPTO_ECRDSA=m
-CONFIG_CRYPTO_CURVE25519=m
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
@@ -581,6 +576,7 @@ CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
 CONFIG_PRIME_NUMBERS=m
+CONFIG_CRC_BENCHMARK=y
 CONFIG_XZ_DEC_TEST=m
 CONFIG_GLOB_SELFTEST=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
@@ -612,7 +608,6 @@ CONFIG_FIND_BIT_BENCHMARK=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_SYSCTL=m
 CONFIG_LINEAR_RANGES_TEST=m
-CONFIG_CRC_BENCHMARK=y
 CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_TEST_KMOD=m
diff --git a/arch/m68k/configs/multi_defconfig b/arch/m68k/configs/multi_defconfig
index b311e953995d..301a05c12577 100644
--- a/arch/m68k/configs/multi_defconfig
+++ b/arch/m68k/configs/multi_defconfig
@@ -139,6 +139,7 @@ CONFIG_NFT_FIB_NETDEV=m
 CONFIG_NFT_REJECT_NETDEV=m
 CONFIG_NF_FLOW_TABLE_INET=m
 CONFIG_NF_FLOW_TABLE=m
+CONFIG_NETFILTER_XTABLES_LEGACY=y
 CONFIG_NETFILTER_XT_SET=m
 CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@@ -220,14 +221,12 @@ CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_SYNPROXY=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -247,10 +246,8 @@ CONFIG_IP6_NF_MATCH_RPFILTER=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_SRH=m
 CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_TARGET_SYNPROXY=m
-CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP6_NF_NAT=m
 CONFIG_IP6_NF_TARGET_MASQUERADE=m
@@ -259,6 +256,7 @@ CONFIG_NF_TABLES_BRIDGE=m
 CONFIG_NFT_BRIDGE_META=m
 CONFIG_NFT_BRIDGE_REJECT=m
 CONFIG_NF_CONNTRACK_BRIDGE=m
+CONFIG_BRIDGE_NF_EBTABLES_LEGACY=m
 CONFIG_BRIDGE_NF_EBTABLES=m
 CONFIG_BRIDGE_EBT_BROUTE=m
 CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -327,7 +325,6 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_DRBD=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
-CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
 CONFIG_DUMMY_IRQ=m
 CONFIG_RAID_ATTRS=m
@@ -517,7 +514,6 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 CONFIG_BTRFS_FS=m
-CONFIG_BCACHEFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -623,7 +619,6 @@ CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_ECDSA=m
 CONFIG_CRYPTO_ECRDSA=m
-CONFIG_CRYPTO_CURVE25519=m
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
@@ -668,6 +663,7 @@ CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
 CONFIG_PRIME_NUMBERS=m
+CONFIG_CRC_BENCHMARK=y
 CONFIG_XZ_DEC_TEST=m
 CONFIG_GLOB_SELFTEST=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
@@ -699,7 +695,6 @@ CONFIG_FIND_BIT_BENCHMARK=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_SYSCTL=m
 CONFIG_LINEAR_RANGES_TEST=m
-CONFIG_CRC_BENCHMARK=y
 CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_TEST_KMOD=m
diff --git a/arch/m68k/configs/mvme147_defconfig b/arch/m68k/configs/mvme147_defconfig
index f4e6224f137f..0d401db0e8f8 100644
--- a/arch/m68k/configs/mvme147_defconfig
+++ b/arch/m68k/configs/mvme147_defconfig
@@ -117,6 +117,7 @@ CONFIG_NFT_FIB_NETDEV=m
 CONFIG_NFT_REJECT_NETDEV=m
 CONFIG_NF_FLOW_TABLE_INET=m
 CONFIG_NF_FLOW_TABLE=m
+CONFIG_NETFILTER_XTABLES_LEGACY=y
 CONFIG_NETFILTER_XT_SET=m
 CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@@ -198,14 +199,12 @@ CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_SYNPROXY=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -225,10 +224,8 @@ CONFIG_IP6_NF_MATCH_RPFILTER=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_SRH=m
 CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_TARGET_SYNPROXY=m
-CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP6_NF_NAT=m
 CONFIG_IP6_NF_TARGET_MASQUERADE=m
@@ -237,6 +234,7 @@ CONFIG_NF_TABLES_BRIDGE=m
 CONFIG_NFT_BRIDGE_META=m
 CONFIG_NFT_BRIDGE_REJECT=m
 CONFIG_NF_CONNTRACK_BRIDGE=m
+CONFIG_BRIDGE_NF_EBTABLES_LEGACY=m
 CONFIG_BRIDGE_NF_EBTABLES=m
 CONFIG_BRIDGE_EBT_BROUTE=m
 CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -295,7 +293,6 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_DRBD=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
-CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
 CONFIG_DUMMY_IRQ=m
 CONFIG_RAID_ATTRS=m
@@ -403,7 +400,6 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 CONFIG_BTRFS_FS=m
-CONFIG_BCACHEFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -509,7 +505,6 @@ CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_ECDSA=m
 CONFIG_CRYPTO_ECRDSA=m
-CONFIG_CRYPTO_CURVE25519=m
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
@@ -554,6 +549,7 @@ CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
 CONFIG_PRIME_NUMBERS=m
+CONFIG_CRC_BENCHMARK=y
 CONFIG_XZ_DEC_TEST=m
 CONFIG_GLOB_SELFTEST=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
@@ -585,7 +581,6 @@ CONFIG_FIND_BIT_BENCHMARK=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_SYSCTL=m
 CONFIG_LINEAR_RANGES_TEST=m
-CONFIG_CRC_BENCHMARK=y
 CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_TEST_KMOD=m
diff --git a/arch/m68k/configs/mvme16x_defconfig b/arch/m68k/configs/mvme16x_defconfig
index 498e167222f1..90fb5b6bcf83 100644
--- a/arch/m68k/configs/mvme16x_defconfig
+++ b/arch/m68k/configs/mvme16x_defconfig
@@ -118,6 +118,7 @@ CONFIG_NFT_FIB_NETDEV=m
 CONFIG_NFT_REJECT_NETDEV=m
 CONFIG_NF_FLOW_TABLE_INET=m
 CONFIG_NF_FLOW_TABLE=m
+CONFIG_NETFILTER_XTABLES_LEGACY=y
 CONFIG_NETFILTER_XT_SET=m
 CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@@ -199,14 +200,12 @@ CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_SYNPROXY=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -226,10 +225,8 @@ CONFIG_IP6_NF_MATCH_RPFILTER=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_SRH=m
 CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_TARGET_SYNPROXY=m
-CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP6_NF_NAT=m
 CONFIG_IP6_NF_TARGET_MASQUERADE=m
@@ -238,6 +235,7 @@ CONFIG_NF_TABLES_BRIDGE=m
 CONFIG_NFT_BRIDGE_META=m
 CONFIG_NFT_BRIDGE_REJECT=m
 CONFIG_NF_CONNTRACK_BRIDGE=m
+CONFIG_BRIDGE_NF_EBTABLES_LEGACY=m
 CONFIG_BRIDGE_NF_EBTABLES=m
 CONFIG_BRIDGE_EBT_BROUTE=m
 CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -296,7 +294,6 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_DRBD=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
-CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
 CONFIG_DUMMY_IRQ=m
 CONFIG_RAID_ATTRS=m
@@ -404,7 +401,6 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 CONFIG_BTRFS_FS=m
-CONFIG_BCACHEFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -510,7 +506,6 @@ CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_ECDSA=m
 CONFIG_CRYPTO_ECRDSA=m
-CONFIG_CRYPTO_CURVE25519=m
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
@@ -555,6 +550,7 @@ CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
 CONFIG_PRIME_NUMBERS=m
+CONFIG_CRC_BENCHMARK=y
 CONFIG_XZ_DEC_TEST=m
 CONFIG_GLOB_SELFTEST=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
@@ -586,7 +582,6 @@ CONFIG_FIND_BIT_BENCHMARK=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_SYSCTL=m
 CONFIG_LINEAR_RANGES_TEST=m
-CONFIG_CRC_BENCHMARK=y
 CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_TEST_KMOD=m
diff --git a/arch/m68k/configs/q40_defconfig b/arch/m68k/configs/q40_defconfig
index 8c6b1eef8534..b89b0f7fe2da 100644
--- a/arch/m68k/configs/q40_defconfig
+++ b/arch/m68k/configs/q40_defconfig
@@ -119,6 +119,7 @@ CONFIG_NFT_FIB_NETDEV=m
 CONFIG_NFT_REJECT_NETDEV=m
 CONFIG_NF_FLOW_TABLE_INET=m
 CONFIG_NF_FLOW_TABLE=m
+CONFIG_NETFILTER_XTABLES_LEGACY=y
 CONFIG_NETFILTER_XT_SET=m
 CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@@ -200,14 +201,12 @@ CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_SYNPROXY=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -227,10 +226,8 @@ CONFIG_IP6_NF_MATCH_RPFILTER=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_SRH=m
 CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_TARGET_SYNPROXY=m
-CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP6_NF_NAT=m
 CONFIG_IP6_NF_TARGET_MASQUERADE=m
@@ -239,6 +236,7 @@ CONFIG_NF_TABLES_BRIDGE=m
 CONFIG_NFT_BRIDGE_META=m
 CONFIG_NFT_BRIDGE_REJECT=m
 CONFIG_NF_CONNTRACK_BRIDGE=m
+CONFIG_BRIDGE_NF_EBTABLES_LEGACY=m
 CONFIG_BRIDGE_NF_EBTABLES=m
 CONFIG_BRIDGE_EBT_BROUTE=m
 CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -300,7 +298,6 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_DRBD=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
-CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
 CONFIG_DUMMY_IRQ=m
 CONFIG_RAID_ATTRS=m
@@ -420,7 +417,6 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 CONFIG_BTRFS_FS=m
-CONFIG_BCACHEFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -526,7 +522,6 @@ CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_ECDSA=m
 CONFIG_CRYPTO_ECRDSA=m
-CONFIG_CRYPTO_CURVE25519=m
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
@@ -571,6 +566,7 @@ CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
 CONFIG_PRIME_NUMBERS=m
+CONFIG_CRC_BENCHMARK=y
 CONFIG_XZ_DEC_TEST=m
 CONFIG_GLOB_SELFTEST=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
@@ -602,7 +598,6 @@ CONFIG_FIND_BIT_BENCHMARK=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_SYSCTL=m
 CONFIG_LINEAR_RANGES_TEST=m
-CONFIG_CRC_BENCHMARK=y
 CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_TEST_KMOD=m
diff --git a/arch/m68k/configs/sun3_defconfig b/arch/m68k/configs/sun3_defconfig
index c34648f299ef..8cc372c4df72 100644
--- a/arch/m68k/configs/sun3_defconfig
+++ b/arch/m68k/configs/sun3_defconfig
@@ -114,6 +114,7 @@ CONFIG_NFT_FIB_NETDEV=m
 CONFIG_NFT_REJECT_NETDEV=m
 CONFIG_NF_FLOW_TABLE_INET=m
 CONFIG_NF_FLOW_TABLE=m
+CONFIG_NETFILTER_XTABLES_LEGACY=y
 CONFIG_NETFILTER_XT_SET=m
 CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@@ -195,14 +196,12 @@ CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_SYNPROXY=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -222,10 +221,8 @@ CONFIG_IP6_NF_MATCH_RPFILTER=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_SRH=m
 CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_TARGET_SYNPROXY=m
-CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP6_NF_NAT=m
 CONFIG_IP6_NF_TARGET_MASQUERADE=m
@@ -234,6 +231,7 @@ CONFIG_NF_TABLES_BRIDGE=m
 CONFIG_NFT_BRIDGE_META=m
 CONFIG_NFT_BRIDGE_REJECT=m
 CONFIG_NF_CONNTRACK_BRIDGE=m
+CONFIG_BRIDGE_NF_EBTABLES_LEGACY=m
 CONFIG_BRIDGE_NF_EBTABLES=m
 CONFIG_BRIDGE_EBT_BROUTE=m
 CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -292,7 +290,6 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_DRBD=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
-CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
 CONFIG_DUMMY_IRQ=m
 CONFIG_RAID_ATTRS=m
@@ -401,7 +398,6 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 CONFIG_BTRFS_FS=m
-CONFIG_BCACHEFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -507,7 +503,6 @@ CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_ECDSA=m
 CONFIG_CRYPTO_ECRDSA=m
-CONFIG_CRYPTO_CURVE25519=m
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
@@ -552,6 +547,7 @@ CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
 CONFIG_PRIME_NUMBERS=m
+CONFIG_CRC_BENCHMARK=y
 CONFIG_XZ_DEC_TEST=m
 CONFIG_GLOB_SELFTEST=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
@@ -582,7 +578,6 @@ CONFIG_FIND_BIT_BENCHMARK=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_SYSCTL=m
 CONFIG_LINEAR_RANGES_TEST=m
-CONFIG_CRC_BENCHMARK=y
 CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_TEST_KMOD=m
diff --git a/arch/m68k/configs/sun3x_defconfig b/arch/m68k/configs/sun3x_defconfig
index 73810d14660f..f4569f64c6e4 100644
--- a/arch/m68k/configs/sun3x_defconfig
+++ b/arch/m68k/configs/sun3x_defconfig
@@ -115,6 +115,7 @@ CONFIG_NFT_FIB_NETDEV=m
 CONFIG_NFT_REJECT_NETDEV=m
 CONFIG_NF_FLOW_TABLE_INET=m
 CONFIG_NF_FLOW_TABLE=m
+CONFIG_NETFILTER_XTABLES_LEGACY=y
 CONFIG_NETFILTER_XT_SET=m
 CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
 CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
@@ -196,14 +197,12 @@ CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
 CONFIG_IP_NF_TARGET_SYNPROXY=m
 CONFIG_IP_NF_NAT=m
 CONFIG_IP_NF_TARGET_MASQUERADE=m
 CONFIG_IP_NF_TARGET_NETMAP=m
 CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
 CONFIG_IP_NF_TARGET_TTL=m
 CONFIG_IP_NF_RAW=m
@@ -223,10 +222,8 @@ CONFIG_IP6_NF_MATCH_RPFILTER=m
 CONFIG_IP6_NF_MATCH_RT=m
 CONFIG_IP6_NF_MATCH_SRH=m
 CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
 CONFIG_IP6_NF_TARGET_SYNPROXY=m
-CONFIG_IP6_NF_MANGLE=m
 CONFIG_IP6_NF_RAW=m
 CONFIG_IP6_NF_NAT=m
 CONFIG_IP6_NF_TARGET_MASQUERADE=m
@@ -235,6 +232,7 @@ CONFIG_NF_TABLES_BRIDGE=m
 CONFIG_NFT_BRIDGE_META=m
 CONFIG_NFT_BRIDGE_REJECT=m
 CONFIG_NF_CONNTRACK_BRIDGE=m
+CONFIG_BRIDGE_NF_EBTABLES_LEGACY=m
 CONFIG_BRIDGE_NF_EBTABLES=m
 CONFIG_BRIDGE_EBT_BROUTE=m
 CONFIG_BRIDGE_EBT_T_FILTER=m
@@ -293,7 +291,6 @@ CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_DRBD=m
 CONFIG_BLK_DEV_NBD=m
 CONFIG_BLK_DEV_RAM=y
-CONFIG_CDROM_PKTCDVD=m
 CONFIG_ATA_OVER_ETH=m
 CONFIG_DUMMY_IRQ=m
 CONFIG_RAID_ATTRS=m
@@ -401,7 +398,6 @@ CONFIG_XFS_FS=m
 CONFIG_OCFS2_FS=m
 # CONFIG_OCFS2_DEBUG_MASKLOG is not set
 CONFIG_BTRFS_FS=m
-CONFIG_BCACHEFS_FS=m
 CONFIG_FANOTIFY=y
 CONFIG_QUOTA_NETLINK_INTERFACE=y
 CONFIG_AUTOFS_FS=m
@@ -507,7 +503,6 @@ CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_ECDSA=m
 CONFIG_CRYPTO_ECRDSA=m
-CONFIG_CRYPTO_CURVE25519=m
 CONFIG_CRYPTO_AES=y
 CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
@@ -552,6 +547,7 @@ CONFIG_CRYPTO_USER_API_RNG=m
 CONFIG_CRYPTO_USER_API_AEAD=m
 # CONFIG_CRYPTO_HW is not set
 CONFIG_PRIME_NUMBERS=m
+CONFIG_CRC_BENCHMARK=y
 CONFIG_XZ_DEC_TEST=m
 CONFIG_GLOB_SELFTEST=m
 # CONFIG_SECTION_MISMATCH_WARN_ONLY is not set
@@ -583,7 +579,6 @@ CONFIG_FIND_BIT_BENCHMARK=m
 CONFIG_TEST_FIRMWARE=m
 CONFIG_TEST_SYSCTL=m
 CONFIG_LINEAR_RANGES_TEST=m
-CONFIG_CRC_BENCHMARK=y
 CONFIG_TEST_UDELAY=m
 CONFIG_TEST_STATIC_KEYS=m
 CONFIG_TEST_KMOD=m
diff --git a/arch/m68k/emu/nfblock.c b/arch/m68k/emu/nfblock.c
index 83410f8184ec..94a4fadc651a 100644
--- a/arch/m68k/emu/nfblock.c
+++ b/arch/m68k/emu/nfblock.c
@@ -77,9 +77,9 @@ static void nfhd_submit_bio(struct bio *bio)
 	bio_endio(bio);
 }
 
-static int nfhd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
+static int nfhd_getgeo(struct gendisk *disk, struct hd_geometry *geo)
 {
-	struct nfhd_device *dev = bdev->bd_disk->private_data;
+	struct nfhd_device *dev = disk->private_data;
 
 	geo->cylinders = dev->blocks >> (6 - dev->bshift);
 	geo->heads = 4;
diff --git a/arch/m68k/include/asm/bitops.h b/arch/m68k/include/asm/bitops.h
index 14c64a6f1217..e9639e48c6c3 100644
--- a/arch/m68k/include/asm/bitops.h
+++ b/arch/m68k/include/asm/bitops.h
@@ -350,12 +350,12 @@ static inline bool xor_unlock_is_negative_byte(unsigned long mask,
 #include <asm-generic/bitops/ffz.h>
 #else
 
-static inline int find_first_zero_bit(const unsigned long *vaddr,
-				      unsigned size)
+static inline unsigned long find_first_zero_bit(const unsigned long *vaddr,
+						unsigned long size)
 {
 	const unsigned long *p = vaddr;
-	int res = 32;
-	unsigned int words;
+	unsigned long res = 32;
+	unsigned long words;
 	unsigned long num;
 
 	if (!size)
@@ -376,8 +376,9 @@ out:
 }
 #define find_first_zero_bit find_first_zero_bit
 
-static inline int find_next_zero_bit(const unsigned long *vaddr, int size,
-				     int offset)
+static inline unsigned long find_next_zero_bit(const unsigned long *vaddr,
+					       unsigned long size,
+					       unsigned long offset)
 {
 	const unsigned long *p = vaddr + (offset >> 5);
 	int bit = offset & 31UL, res;
@@ -406,11 +407,12 @@ static inline int find_next_zero_bit(const unsigned long *vaddr, int size,
 }
 #define find_next_zero_bit find_next_zero_bit
 
-static inline int find_first_bit(const unsigned long *vaddr, unsigned size)
+static inline unsigned long find_first_bit(const unsigned long *vaddr,
+					   unsigned long size)
 {
 	const unsigned long *p = vaddr;
-	int res = 32;
-	unsigned int words;
+	unsigned long res = 32;
+	unsigned long words;
 	unsigned long num;
 
 	if (!size)
@@ -431,8 +433,9 @@ out:
 }
 #define find_first_bit find_first_bit
 
-static inline int find_next_bit(const unsigned long *vaddr, int size,
-				int offset)
+static inline unsigned long find_next_bit(const unsigned long *vaddr,
+					  unsigned long size,
+					  unsigned long offset)
 {
 	const unsigned long *p = vaddr + (offset >> 5);
 	int bit = offset & 31UL, res;
@@ -465,7 +468,7 @@ static inline int find_next_bit(const unsigned long *vaddr, int size,
  * ffz = Find First Zero in word. Undefined if no zero exists,
  * so code should check against ~0UL first..
  */
-static inline unsigned long ffz(unsigned long word)
+static inline unsigned long __attribute_const__ ffz(unsigned long word)
 {
 	int res;
 
@@ -488,7 +491,7 @@ static inline unsigned long ffz(unsigned long word)
  */
 #if (defined(__mcfisaaplus__) || defined(__mcfisac__)) && \
 	!defined(CONFIG_M68000)
-static inline unsigned long __ffs(unsigned long x)
+static inline __attribute_const__ unsigned long __ffs(unsigned long x)
 {
 	__asm__ __volatile__ ("bitrev %0; ff1 %0"
 		: "=d" (x)
@@ -496,7 +499,7 @@ static inline unsigned long __ffs(unsigned long x)
 	return x;
 }
 
-static inline int ffs(int x)
+static inline __attribute_const__ int ffs(int x)
 {
 	if (!x)
 		return 0;
@@ -518,7 +521,7 @@ static inline int ffs(int x)
  *	the libc and compiler builtin ffs routines, therefore
  *	differs in spirit from the above ffz (man ffs).
  */
-static inline int ffs(int x)
+static inline __attribute_const__ int ffs(int x)
 {
 	int cnt;
 
@@ -528,7 +531,7 @@ static inline int ffs(int x)
 	return 32 - cnt;
 }
 
-static inline unsigned long __ffs(unsigned long x)
+static inline __attribute_const__ unsigned long __ffs(unsigned long x)
 {
 	return ffs(x) - 1;
 }
@@ -536,7 +539,7 @@ static inline unsigned long __ffs(unsigned long x)
 /*
  *	fls: find last bit set.
  */
-static inline int fls(unsigned int x)
+static inline __attribute_const__ int fls(unsigned int x)
 {
 	int cnt;
 
@@ -546,7 +549,7 @@ static inline int fls(unsigned int x)
 	return 32 - cnt;
 }
 
-static inline unsigned long __fls(unsigned long x)
+static inline __attribute_const__ unsigned long __fls(unsigned long x)
 {
 	return fls(x) - 1;
 }
diff --git a/arch/m68k/include/asm/floppy.h b/arch/m68k/include/asm/floppy.h
index a4d0fea47c6b..dea98bbc0932 100644
--- a/arch/m68k/include/asm/floppy.h
+++ b/arch/m68k/include/asm/floppy.h
@@ -107,13 +107,9 @@ static void fd_free_irq(void)
 
 #define fd_free_dma()             /* nothing */
 
-/* No 64k boundary crossing problems on Q40 - no DMA at all */
-#define CROSS_64KB(a,s) (0)
-
 #define DMA_MODE_READ  0x44    /* i386 look-alike */
 #define DMA_MODE_WRITE 0x48
 
-
 static int m68k_floppy_init(void)
 {
   use_virtual_dma =1;
diff --git a/arch/m68k/kernel/asm-offsets.c b/arch/m68k/kernel/asm-offsets.c
index 906d73230537..67a1990f9d74 100644
--- a/arch/m68k/kernel/asm-offsets.c
+++ b/arch/m68k/kernel/asm-offsets.c
@@ -9,6 +9,7 @@
  * #defines from the assembly-language output.
  */
 
+#define COMPILE_OFFSETS
 #define ASM_OFFSETS_C
 
 #include <linux/stddef.h>
diff --git a/arch/m68k/kernel/process.c b/arch/m68k/kernel/process.c
index fda7eac23f87..f5a07a70e938 100644
--- a/arch/m68k/kernel/process.c
+++ b/arch/m68k/kernel/process.c
@@ -141,7 +141,7 @@ asmlinkage int m68k_clone3(struct pt_regs *regs)
 
 int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
-	unsigned long clone_flags = args->flags;
+	u64 clone_flags = args->flags;
 	unsigned long usp = args->stack;
 	unsigned long tls = args->tls;
 	struct fork_frame {
diff --git a/arch/microblaze/Kconfig.platform b/arch/microblaze/Kconfig.platform
index 7795f90dad86..9cf9007ed69a 100644
--- a/arch/microblaze/Kconfig.platform
+++ b/arch/microblaze/Kconfig.platform
@@ -8,10 +8,10 @@
 menu "Platform options"
 
 config OPT_LIB_FUNCTION
-	bool "Optimalized lib function"
+	bool "Optimized lib function"
 	default y
 	help
-	  Allows turn on optimalized library function (memcpy and memmove).
+	  Turns on optimized library functions (memcpy and memmove).
 	  They are optimized by using word alignment. This will work
 	  fine if both source and destination are aligned on the same
 	  boundary. However, if they are aligned on different boundaries
@@ -19,13 +19,13 @@ config OPT_LIB_FUNCTION
 	  on MicroBlaze systems without a barrel shifter.
 
 config OPT_LIB_ASM
-	bool "Optimalized lib function ASM"
+	bool "Optimized lib function ASM"
 	depends on OPT_LIB_FUNCTION && (XILINX_MICROBLAZE0_USE_BARREL = 1)
 	depends on CPU_BIG_ENDIAN
 	default n
 	help
-	  Allows turn on optimalized library function (memcpy and memmove).
-	  Function are written in asm code.
+	  Turns on optimized library functions (memcpy and memmove).
+	  They are written in assembly.
 
 # Definitions for MICROBLAZE0
 comment "Definitions for MICROBLAZE0"
diff --git a/arch/microblaze/include/asm/asm-compat.h b/arch/microblaze/include/asm/asm-compat.h
index c05259ce2d2c..9f0461476231 100644
--- a/arch/microblaze/include/asm/asm-compat.h
+++ b/arch/microblaze/include/asm/asm-compat.h
@@ -4,7 +4,7 @@
 
 #include <asm/types.h>
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #  define stringify_in_c(...)	__VA_ARGS__
 #  define ASM_CONST(x)		x
 #else
diff --git a/arch/microblaze/include/asm/current.h b/arch/microblaze/include/asm/current.h
index a4bb45be30e6..099e69f32bf9 100644
--- a/arch/microblaze/include/asm/current.h
+++ b/arch/microblaze/include/asm/current.h
@@ -14,13 +14,13 @@
  * but check asm/microblaze/kernel/entry.S to be sure.
  */
 #define CURRENT_TASK	r31
-# ifndef __ASSEMBLY__
+# ifndef __ASSEMBLER__
 /*
  * Dedicate r31 to keeping the current task pointer
  */
 register struct task_struct *current asm("r31");
 
 # define get_current()	current
-# endif /* __ASSEMBLY__ */
+# endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_MICROBLAZE_CURRENT_H */
diff --git a/arch/microblaze/include/asm/entry.h b/arch/microblaze/include/asm/entry.h
index 6c42bed41166..9efadf12397c 100644
--- a/arch/microblaze/include/asm/entry.h
+++ b/arch/microblaze/include/asm/entry.h
@@ -21,7 +21,7 @@
 
 #define PER_CPU(var) var
 
-# ifndef __ASSEMBLY__
+# ifndef __ASSEMBLER__
 DECLARE_PER_CPU(unsigned int, KSP); /* Saved kernel stack pointer */
 DECLARE_PER_CPU(unsigned int, KM); /* Kernel/user mode */
 DECLARE_PER_CPU(unsigned int, ENTRY_SP); /* Saved SP on kernel entry */
@@ -29,6 +29,6 @@ DECLARE_PER_CPU(unsigned int, R11_SAVE); /* Temp variable for entry */
 DECLARE_PER_CPU(unsigned int, CURRENT_SAVE); /* Saved current pointer */
 
 extern asmlinkage void do_notify_resume(struct pt_regs *regs, int in_syscall);
-# endif /* __ASSEMBLY__ */
+# endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_MICROBLAZE_ENTRY_H */
diff --git a/arch/microblaze/include/asm/exceptions.h b/arch/microblaze/include/asm/exceptions.h
index 967f175173e1..c4591e4f7175 100644
--- a/arch/microblaze/include/asm/exceptions.h
+++ b/arch/microblaze/include/asm/exceptions.h
@@ -11,7 +11,7 @@
 #define _ASM_MICROBLAZE_EXCEPTIONS_H
 
 #ifdef __KERNEL__
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /* Macros to enable and disable HW exceptions in the MSR */
 /* Define MSR enable bit for HW exceptions */
@@ -64,6 +64,6 @@ void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig);
 void die(const char *str, struct pt_regs *fp, long err);
 void _exception(int signr, struct pt_regs *regs, int code, unsigned long addr);
 
-#endif /*__ASSEMBLY__ */
+#endif /*__ASSEMBLER__ */
 #endif /* __KERNEL__ */
 #endif /* _ASM_MICROBLAZE_EXCEPTIONS_H */
diff --git a/arch/microblaze/include/asm/fixmap.h b/arch/microblaze/include/asm/fixmap.h
index e6e9288bff76..f9797849e4d4 100644
--- a/arch/microblaze/include/asm/fixmap.h
+++ b/arch/microblaze/include/asm/fixmap.h
@@ -15,7 +15,7 @@
 #ifndef _ASM_FIXMAP_H
 #define _ASM_FIXMAP_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <linux/kernel.h>
 #include <asm/page.h>
 #ifdef CONFIG_HIGHMEM
@@ -62,5 +62,5 @@ extern void __set_fixmap(enum fixed_addresses idx,
 
 #include <asm-generic/fixmap.h>
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 #endif
diff --git a/arch/microblaze/include/asm/ftrace.h b/arch/microblaze/include/asm/ftrace.h
index 4ca38b92a3a2..27c1bafb669c 100644
--- a/arch/microblaze/include/asm/ftrace.h
+++ b/arch/microblaze/include/asm/ftrace.h
@@ -7,7 +7,7 @@
 #define MCOUNT_ADDR		((unsigned long)(_mcount))
 #define MCOUNT_INSN_SIZE	8 /* sizeof mcount call */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 extern void _mcount(void);
 extern void ftrace_call_graph(void);
 void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr);
diff --git a/arch/microblaze/include/asm/kgdb.h b/arch/microblaze/include/asm/kgdb.h
index 8dc5ebb07fd5..321c3c8bfcf2 100644
--- a/arch/microblaze/include/asm/kgdb.h
+++ b/arch/microblaze/include/asm/kgdb.h
@@ -3,7 +3,7 @@
 #ifndef __MICROBLAZE_KGDB_H__
 #define __MICROBLAZE_KGDB_H__
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #define CACHE_FLUSH_IS_SAFE	1
 #define BUFMAX			2048
@@ -27,6 +27,6 @@ static inline void arch_kgdb_breakpoint(void)
 struct pt_regs;
 asmlinkage void microblaze_kgdb_break(struct pt_regs *regs);
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif /* __MICROBLAZE_KGDB_H__ */
 #endif /* __KERNEL__ */
diff --git a/arch/microblaze/include/asm/mmu.h b/arch/microblaze/include/asm/mmu.h
index b928a87c0076..7262dc4da338 100644
--- a/arch/microblaze/include/asm/mmu.h
+++ b/arch/microblaze/include/asm/mmu.h
@@ -9,7 +9,7 @@
 #define _ASM_MICROBLAZE_MMU_H
 
 #  ifdef __KERNEL__
-#   ifndef __ASSEMBLY__
+#   ifndef __ASSEMBLER__
 
 /* Default "unsigned long" context */
 typedef unsigned long mm_context_t;
@@ -56,7 +56,7 @@ extern void _tlbia(void);		/* invalidate all TLB entries */
  * mapping has to increase tlb_skip size.
  */
 extern u32 tlb_skip;
-#   endif /* __ASSEMBLY__ */
+#   endif /* __ASSEMBLER__ */
 
 /*
  * The MicroBlaze processor has a TLB architecture identical to PPC-40x. The
diff --git a/arch/microblaze/include/asm/page.h b/arch/microblaze/include/asm/page.h
index 90fc9c81debd..90ac9f34b4b4 100644
--- a/arch/microblaze/include/asm/page.h
+++ b/arch/microblaze/include/asm/page.h
@@ -25,7 +25,7 @@
 
 #define PTE_SHIFT	(PAGE_SHIFT - 2)	/* 1024 ptes per page */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /*
  * PAGE_OFFSET -- the first address of the first page of memory. With MMU
@@ -100,7 +100,7 @@ extern int page_is_ram(unsigned long pfn);
 #  define page_to_virt(page)   __va(page_to_pfn(page) << PAGE_SHIFT)
 
 #  define ARCH_PFN_OFFSET	(memory_start >> PAGE_SHIFT)
-# endif /* __ASSEMBLY__ */
+# endif /* __ASSEMBLER__ */
 
 /* Convert between virtual and physical address for MMU. */
 /* Handle MicroBlaze processor with virtual memory. */
@@ -113,7 +113,7 @@ extern int page_is_ram(unsigned long pfn);
 #define tovirt(rd, rs) \
 	addik rd, rs, (CONFIG_KERNEL_START - CONFIG_KERNEL_BASE_ADDR)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 # define __pa(x)	__virt_to_phys((unsigned long)(x))
 # define __va(x)	((void *)__phys_to_virt((unsigned long)(x)))
@@ -130,7 +130,7 @@ static inline const void *pfn_to_virt(unsigned long pfn)
 
 #define	virt_addr_valid(vaddr)	(pfn_valid(virt_to_pfn(vaddr)))
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #define TOPHYS(addr)  __virt_to_phys(addr)
 
diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h
index bae1abfa6f6b..a60e8d895102 100644
--- a/arch/microblaze/include/asm/pgtable.h
+++ b/arch/microblaze/include/asm/pgtable.h
@@ -10,14 +10,14 @@
 
 #include <asm/setup.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 extern int mem_init_done;
 #endif
 
 #include <asm-generic/pgtable-nopmd.h>
 
 #ifdef __KERNEL__
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/sched.h>
 #include <linux/threads.h>
@@ -39,7 +39,7 @@ extern pte_t *va_to_pte(unsigned long address);
 #define VMALLOC_START	(CONFIG_KERNEL_START + CONFIG_LOWMEM_SIZE)
 #define VMALLOC_END	ioremap_bot
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 /*
  * Macro to mark a page protection value as "uncacheable".
@@ -208,7 +208,7 @@ extern pte_t *va_to_pte(unsigned long address);
  * Also, write permissions imply read permissions.
  */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 /*
  * ZERO_PAGE is a global shared page that is always zero: used
  * for zero-mapped memory areas etc..
@@ -216,7 +216,7 @@ extern pte_t *va_to_pte(unsigned long address);
 extern unsigned long empty_zero_page[1024];
 #define ZERO_PAGE(vaddr) (virt_to_page(empty_zero_page))
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #define pte_none(pte)		((pte_val(pte) & ~_PTE_NONE_MASK) == 0)
 #define pte_present(pte)	(pte_val(pte) & _PAGE_PRESENT)
@@ -237,7 +237,7 @@ extern unsigned long empty_zero_page[1024];
 #define pfn_pte(pfn, prot) \
 	__pte(((pte_basic_t)(pfn) << PFN_PTE_SHIFT) | pgprot_val(prot))
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 /*
  * The following only work if pte_present() is true.
  * Undefined behaviour if not..
@@ -436,13 +436,13 @@ extern int mem_init_done;
 
 asmlinkage void __init mmu_init(void);
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif /* __KERNEL__ */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 extern unsigned long ioremap_bot, ioremap_base;
 
 void setup_memory(void);
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_MICROBLAZE_PGTABLE_H */
diff --git a/arch/microblaze/include/asm/processor.h b/arch/microblaze/include/asm/processor.h
index 4e193c7550df..d59bdfffca7c 100644
--- a/arch/microblaze/include/asm/processor.h
+++ b/arch/microblaze/include/asm/processor.h
@@ -14,7 +14,7 @@
 #include <asm/entry.h>
 #include <asm/current.h>
 
-# ifndef __ASSEMBLY__
+# ifndef __ASSEMBLER__
 /* from kernel/cpu/mb.c */
 extern const struct seq_operations cpuinfo_op;
 
@@ -29,7 +29,7 @@ void start_thread(struct pt_regs *regs, unsigned long pc, unsigned long usp);
 extern void ret_from_fork(void);
 extern void ret_from_kernel_thread(void);
 
-# endif /* __ASSEMBLY__ */
+# endif /* __ASSEMBLER__ */
 
 /*
  * This is used to define STACK_TOP, and with MMU it must be below
@@ -45,7 +45,7 @@ extern void ret_from_kernel_thread(void);
 
 # define THREAD_KSP	0
 
-#  ifndef __ASSEMBLY__
+#  ifndef __ASSEMBLER__
 
 /* If you change this, you must change the associated assembly-languages
  * constants defined below, THREAD_*.
@@ -88,5 +88,5 @@ unsigned long __get_wchan(struct task_struct *p);
 extern struct dentry *of_debugfs_root;
 #endif
 
-#  endif /* __ASSEMBLY__ */
+#  endif /* __ASSEMBLER__ */
 #endif /* _ASM_MICROBLAZE_PROCESSOR_H */
diff --git a/arch/microblaze/include/asm/ptrace.h b/arch/microblaze/include/asm/ptrace.h
index bfcb89df5e26..17982292a64f 100644
--- a/arch/microblaze/include/asm/ptrace.h
+++ b/arch/microblaze/include/asm/ptrace.h
@@ -7,7 +7,7 @@
 
 #include <uapi/asm/ptrace.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #define kernel_mode(regs)		((regs)->pt_mode)
 #define user_mode(regs)			(!kernel_mode(regs))
 
@@ -20,5 +20,5 @@ static inline long regs_return_value(struct pt_regs *regs)
 	return regs->r3;
 }
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif /* _ASM_MICROBLAZE_PTRACE_H */
diff --git a/arch/microblaze/include/asm/sections.h b/arch/microblaze/include/asm/sections.h
index a9311ad84a67..f5008f5e7a5c 100644
--- a/arch/microblaze/include/asm/sections.h
+++ b/arch/microblaze/include/asm/sections.h
@@ -10,11 +10,11 @@
 
 #include <asm-generic/sections.h>
 
-# ifndef __ASSEMBLY__
+# ifndef __ASSEMBLER__
 extern char _ssbss[], _esbss[];
 extern unsigned long __ivt_start[], __ivt_end[];
 
 extern u32 _fdt_start[], _fdt_end[];
 
-# endif /* !__ASSEMBLY__ */
+# endif /* !__ASSEMBLER__ */
 #endif /* _ASM_MICROBLAZE_SECTIONS_H */
diff --git a/arch/microblaze/include/asm/setup.h b/arch/microblaze/include/asm/setup.h
index bf2600f75959..837ed0bbae4b 100644
--- a/arch/microblaze/include/asm/setup.h
+++ b/arch/microblaze/include/asm/setup.h
@@ -9,7 +9,7 @@
 
 #include <uapi/asm/setup.h>
 
-# ifndef __ASSEMBLY__
+# ifndef __ASSEMBLER__
 extern char cmd_line[COMMAND_LINE_SIZE];
 
 extern char *klimit;
@@ -25,5 +25,5 @@ void machine_shutdown(void);
 void machine_halt(void);
 void machine_power_off(void);
 
-# endif /* __ASSEMBLY__ */
+# endif /* __ASSEMBLER__ */
 #endif /* _ASM_MICROBLAZE_SETUP_H */
diff --git a/arch/microblaze/include/asm/thread_info.h b/arch/microblaze/include/asm/thread_info.h
index a0ddd2a36fb9..0153f7c2717c 100644
--- a/arch/microblaze/include/asm/thread_info.h
+++ b/arch/microblaze/include/asm/thread_info.h
@@ -13,7 +13,7 @@
 #define THREAD_SIZE		(1 << THREAD_SHIFT)
 #define THREAD_SIZE_ORDER	1
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 # include <linux/types.h>
 # include <asm/processor.h>
 
@@ -86,7 +86,7 @@ static inline struct thread_info *current_thread_info(void)
 }
 
 /* thread information allocation */
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 /*
  * thread information flags
diff --git a/arch/microblaze/include/asm/unistd.h b/arch/microblaze/include/asm/unistd.h
index cfe3f888b432..fedda9908aa9 100644
--- a/arch/microblaze/include/asm/unistd.h
+++ b/arch/microblaze/include/asm/unistd.h
@@ -8,7 +8,7 @@
 
 #include <uapi/asm/unistd.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /* #define __ARCH_WANT_OLD_READDIR */
 /* #define __ARCH_WANT_OLD_STAT */
@@ -33,6 +33,6 @@
 #define __ARCH_WANT_SYS_VFORK
 #define __ARCH_WANT_SYS_FORK
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_MICROBLAZE_UNISTD_H */
diff --git a/arch/microblaze/include/asm/xilinx_mb_manager.h b/arch/microblaze/include/asm/xilinx_mb_manager.h
index 7b6995722b0c..121a3224882b 100644
--- a/arch/microblaze/include/asm/xilinx_mb_manager.h
+++ b/arch/microblaze/include/asm/xilinx_mb_manager.h
@@ -5,7 +5,7 @@
 #ifndef _XILINX_MB_MANAGER_H
 #define _XILINX_MB_MANAGER_H
 
-# ifndef __ASSEMBLY__
+# ifndef __ASSEMBLER__
 
 #include <linux/of_address.h>
 
@@ -21,7 +21,7 @@ void xmb_manager_register(uintptr_t phys_baseaddr, u32 cr_val,
 			  void *priv, void (*reset_callback)(void *data));
 asmlinkage void xmb_inject_err(void);
 
-# endif /* __ASSEMBLY__ */
+# endif /* __ASSEMBLER__ */
 
 /* Error injection offset */
 #define XMB_INJECT_ERR_OFFSET	0x200
diff --git a/arch/microblaze/include/uapi/asm/ptrace.h b/arch/microblaze/include/uapi/asm/ptrace.h
index 46dd94cb7802..8039957a1a9c 100644
--- a/arch/microblaze/include/uapi/asm/ptrace.h
+++ b/arch/microblaze/include/uapi/asm/ptrace.h
@@ -10,7 +10,7 @@
 #ifndef _UAPI_ASM_MICROBLAZE_PTRACE_H
 #define _UAPI_ASM_MICROBLAZE_PTRACE_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 typedef unsigned long microblaze_reg_t;
 
@@ -68,6 +68,6 @@ struct pt_regs {
 
 #endif /* __KERNEL */
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _UAPI_ASM_MICROBLAZE_PTRACE_H */
diff --git a/arch/microblaze/kernel/asm-offsets.c b/arch/microblaze/kernel/asm-offsets.c
index 104c3ac5f30c..b4b67d58e7f6 100644
--- a/arch/microblaze/kernel/asm-offsets.c
+++ b/arch/microblaze/kernel/asm-offsets.c
@@ -7,6 +7,7 @@
  * License. See the file "COPYING" in the main directory of this archive
  * for more details.
  */
+#define COMPILE_OFFSETS
 
 #include <linux/init.h>
 #include <linux/stddef.h>
diff --git a/arch/microblaze/kernel/process.c b/arch/microblaze/kernel/process.c
index 56342e11442d..6cbf642d7b80 100644
--- a/arch/microblaze/kernel/process.c
+++ b/arch/microblaze/kernel/process.c
@@ -54,7 +54,7 @@ void flush_thread(void)
 
 int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
-	unsigned long clone_flags = args->flags;
+	u64 clone_flags = args->flags;
 	unsigned long usp = args->stack;
 	unsigned long tls = args->tls;
 	struct pt_regs *childregs = task_pt_regs(p);
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index caf508f6e9ec..32d2d701c684 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -6,7 +6,7 @@ config MIPS
 	select ARCH_BINFMT_ELF_STATE if MIPS_FP_SUPPORT
 	select ARCH_HAS_CPU_CACHE_ALIASING
 	select ARCH_HAS_CPU_FINALIZE_INIT
-	select ARCH_HAS_CURRENT_STACK_POINTER if !CC_IS_CLANG || CLANG_VERSION >= 140000
+	select ARCH_HAS_CURRENT_STACK_POINTER
 	select ARCH_HAS_DEBUG_VIRTUAL if !64BIT
 	select ARCH_HAS_DMA_OPS if MACH_JAZZ
 	select ARCH_HAS_FORTIFY_SOURCE
@@ -51,7 +51,6 @@ config MIPS
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_IDLE_POLL_SETUP
 	select GENERIC_TIME_VSYSCALL
-	select GENERIC_VDSO_DATA_STORE
 	select GUP_GET_PXX_LOW_HIGH if CPU_MIPS32 && PHYS_ADDR_T_64BIT
 	select HAS_IOPORT if !NO_IOPORT_MAP || ISA
 	select HAVE_ARCH_COMPILER_H
@@ -2223,7 +2222,7 @@ config MIPS_MT_SMP
 	select SMP
 	select SMP_UP
 	select SYS_SUPPORTS_SMP
-	select SYS_SUPPORTS_SCHED_SMT
+	select ARCH_SUPPORTS_SCHED_SMT
 	select MIPS_PERF_SHARED_TC_COUNTERS
 	help
 	  This is a kernel model which is known as SMVP. This is supported
@@ -2235,18 +2234,6 @@ config MIPS_MT_SMP
 config MIPS_MT
 	bool
 
-config SCHED_SMT
-	bool "SMT (multithreading) scheduler support"
-	depends on SYS_SUPPORTS_SCHED_SMT
-	default n
-	help
-	  SMT scheduler support improves the CPU scheduler's decision making
-	  when dealing with MIPS MT enabled cores at a cost of slightly
-	  increased overhead in some places. If unsure say N here.
-
-config SYS_SUPPORTS_SCHED_SMT
-	bool
-
 config SYS_SUPPORTS_MULTITHREADING
 	bool
 
@@ -2318,7 +2305,7 @@ config MIPS_CPS
 	select HOTPLUG_CORE_SYNC_DEAD if HOTPLUG_CPU
 	select SYNC_R4K if (CEVT_R4K || CSRC_R4K)
 	select SYS_SUPPORTS_HOTPLUG_CPU
-	select SYS_SUPPORTS_SCHED_SMT if CPU_MIPSR6
+	select ARCH_SUPPORTS_SCHED_SMT if CPU_MIPSR6
 	select SYS_SUPPORTS_SMP
 	select WEAK_ORDERING
 	select GENERIC_IRQ_MIGRATION if HOTPLUG_CPU
diff --git a/arch/mips/boot/dts/lantiq/danube_easy50712.dts b/arch/mips/boot/dts/lantiq/danube_easy50712.dts
index 1ce20b7d05cb..c4d7aa5753b0 100644
--- a/arch/mips/boot/dts/lantiq/danube_easy50712.dts
+++ b/arch/mips/boot/dts/lantiq/danube_easy50712.dts
@@ -82,13 +82,16 @@
 			};
 		};
 
-		etop@e180000 {
+		ethernet@e180000 {
 			compatible = "lantiq,etop-xway";
 			reg = <0xe180000 0x40000>;
 			interrupt-parent = <&icu0>;
 			interrupts = <73 78>;
+			interrupt-names = "tx", "rx";
 			phy-mode = "rmii";
 			mac-address = [ 00 11 22 33 44 55 ];
+			lantiq,rx-burst-length = <4>;
+			lantiq,tx-burst-length = <4>;
 		};
 
 		stp0: stp@e100bb0 {
diff --git a/arch/mips/cavium-octeon/Makefile b/arch/mips/cavium-octeon/Makefile
index 2a5926578841..ab84ede0cbe0 100644
--- a/arch/mips/cavium-octeon/Makefile
+++ b/arch/mips/cavium-octeon/Makefile
@@ -11,9 +11,9 @@
 
 obj-y := cpu.o setup.o octeon-platform.o octeon-irq.o csrc-octeon.o
 obj-y += dma-octeon.o
+obj-y += octeon-crypto.o
 obj-y += octeon-memcpy.o
 obj-y += executive/
-obj-y += crypto/
 
 obj-$(CONFIG_MTD)		      += flash_setup.o
 obj-$(CONFIG_SMP)		      += smp.o
diff --git a/arch/mips/cavium-octeon/crypto/Makefile b/arch/mips/cavium-octeon/crypto/Makefile
deleted file mode 100644
index 83f2f5dd93cc..000000000000
--- a/arch/mips/cavium-octeon/crypto/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0
-#
-# OCTEON-specific crypto modules.
-#
-
-obj-y += octeon-crypto.o
-
-obj-$(CONFIG_CRYPTO_MD5_OCTEON)		+= octeon-md5.o
diff --git a/arch/mips/cavium-octeon/crypto/octeon-md5.c b/arch/mips/cavium-octeon/crypto/octeon-md5.c
deleted file mode 100644
index a8ce831e2ceb..000000000000
--- a/arch/mips/cavium-octeon/crypto/octeon-md5.c
+++ /dev/null
@@ -1,214 +0,0 @@
-/*
- * Cryptographic API.
- *
- * MD5 Message Digest Algorithm (RFC1321).
- *
- * Adapted for OCTEON by Aaro Koskinen <aaro.koskinen@iki.fi>.
- *
- * Based on crypto/md5.c, which is:
- *
- * Derived from cryptoapi implementation, originally based on the
- * public domain implementation written by Colin Plumb in 1993.
- *
- * Copyright (c) Cryptoapi developers.
- * Copyright (c) 2002 James Morris <jmorris@intercode.com.au>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the Free
- * Software Foundation; either version 2 of the License, or (at your option)
- * any later version.
- */
-
-#include <asm/octeon/crypto.h>
-#include <asm/octeon/octeon.h>
-#include <crypto/internal/hash.h>
-#include <crypto/md5.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/unaligned.h>
-
-struct octeon_md5_state {
-	__le32 hash[MD5_HASH_WORDS];
-	u64 byte_count;
-};
-
-/*
- * We pass everything as 64-bit. OCTEON can handle misaligned data.
- */
-
-static void octeon_md5_store_hash(struct octeon_md5_state *ctx)
-{
-	u64 *hash = (u64 *)ctx->hash;
-
-	write_octeon_64bit_hash_dword(hash[0], 0);
-	write_octeon_64bit_hash_dword(hash[1], 1);
-}
-
-static void octeon_md5_read_hash(struct octeon_md5_state *ctx)
-{
-	u64 *hash = (u64 *)ctx->hash;
-
-	hash[0] = read_octeon_64bit_hash_dword(0);
-	hash[1] = read_octeon_64bit_hash_dword(1);
-}
-
-static void octeon_md5_transform(const void *_block)
-{
-	const u64 *block = _block;
-
-	write_octeon_64bit_block_dword(block[0], 0);
-	write_octeon_64bit_block_dword(block[1], 1);
-	write_octeon_64bit_block_dword(block[2], 2);
-	write_octeon_64bit_block_dword(block[3], 3);
-	write_octeon_64bit_block_dword(block[4], 4);
-	write_octeon_64bit_block_dword(block[5], 5);
-	write_octeon_64bit_block_dword(block[6], 6);
-	octeon_md5_start(block[7]);
-}
-
-static int octeon_md5_init(struct shash_desc *desc)
-{
-	struct octeon_md5_state *mctx = shash_desc_ctx(desc);
-
-	mctx->hash[0] = cpu_to_le32(MD5_H0);
-	mctx->hash[1] = cpu_to_le32(MD5_H1);
-	mctx->hash[2] = cpu_to_le32(MD5_H2);
-	mctx->hash[3] = cpu_to_le32(MD5_H3);
-	mctx->byte_count = 0;
-
-	return 0;
-}
-
-static int octeon_md5_update(struct shash_desc *desc, const u8 *data,
-			     unsigned int len)
-{
-	struct octeon_md5_state *mctx = shash_desc_ctx(desc);
-	struct octeon_cop2_state state;
-	unsigned long flags;
-
-	mctx->byte_count += len;
-	flags = octeon_crypto_enable(&state);
-	octeon_md5_store_hash(mctx);
-
-	do {
-		octeon_md5_transform(data);
-		data += MD5_HMAC_BLOCK_SIZE;
-		len -= MD5_HMAC_BLOCK_SIZE;
-	} while (len >= MD5_HMAC_BLOCK_SIZE);
-
-	octeon_md5_read_hash(mctx);
-	octeon_crypto_disable(&state, flags);
-	mctx->byte_count -= len;
-	return len;
-}
-
-static int octeon_md5_finup(struct shash_desc *desc, const u8 *src,
-			    unsigned int offset, u8 *out)
-{
-	struct octeon_md5_state *mctx = shash_desc_ctx(desc);
-	int padding = 56 - (offset + 1);
-	struct octeon_cop2_state state;
-	u32 block[MD5_BLOCK_WORDS];
-	unsigned long flags;
-	char *p;
-
-	p = memcpy(block, src, offset);
-	p += offset;
-	*p++ = 0x80;
-
-	flags = octeon_crypto_enable(&state);
-	octeon_md5_store_hash(mctx);
-
-	if (padding < 0) {
-		memset(p, 0x00, padding + sizeof(u64));
-		octeon_md5_transform(block);
-		p = (char *)block;
-		padding = 56;
-	}
-
-	memset(p, 0, padding);
-	mctx->byte_count += offset;
-	block[14] = mctx->byte_count << 3;
-	block[15] = mctx->byte_count >> 29;
-	cpu_to_le32_array(block + 14, 2);
-	octeon_md5_transform(block);
-
-	octeon_md5_read_hash(mctx);
-	octeon_crypto_disable(&state, flags);
-
-	memzero_explicit(block, sizeof(block));
-	memcpy(out, mctx->hash, sizeof(mctx->hash));
-
-	return 0;
-}
-
-static int octeon_md5_export(struct shash_desc *desc, void *out)
-{
-	struct octeon_md5_state *ctx = shash_desc_ctx(desc);
-	union {
-		u8 *u8;
-		u32 *u32;
-		u64 *u64;
-	} p = { .u8 = out };
-	int i;
-
-	for (i = 0; i < MD5_HASH_WORDS; i++)
-		put_unaligned(le32_to_cpu(ctx->hash[i]), p.u32++);
-	put_unaligned(ctx->byte_count, p.u64);
-	return 0;
-}
-
-static int octeon_md5_import(struct shash_desc *desc, const void *in)
-{
-	struct octeon_md5_state *ctx = shash_desc_ctx(desc);
-	union {
-		const u8 *u8;
-		const u32 *u32;
-		const u64 *u64;
-	} p = { .u8 = in };
-	int i;
-
-	for (i = 0; i < MD5_HASH_WORDS; i++)
-		ctx->hash[i] = cpu_to_le32(get_unaligned(p.u32++));
-	ctx->byte_count = get_unaligned(p.u64);
-	return 0;
-}
-
-static struct shash_alg alg = {
-	.digestsize	=	MD5_DIGEST_SIZE,
-	.init		=	octeon_md5_init,
-	.update		=	octeon_md5_update,
-	.finup		=	octeon_md5_finup,
-	.export		=	octeon_md5_export,
-	.import		=	octeon_md5_import,
-	.statesize	=	MD5_STATE_SIZE,
-	.descsize	=	sizeof(struct octeon_md5_state),
-	.base		=	{
-		.cra_name	=	"md5",
-		.cra_driver_name=	"octeon-md5",
-		.cra_priority	=	OCTEON_CR_OPCODE_PRIORITY,
-		.cra_flags	=	CRYPTO_AHASH_ALG_BLOCK_ONLY,
-		.cra_blocksize	=	MD5_HMAC_BLOCK_SIZE,
-		.cra_module	=	THIS_MODULE,
-	}
-};
-
-static int __init md5_mod_init(void)
-{
-	if (!octeon_has_crypto())
-		return -ENOTSUPP;
-	return crypto_register_shash(&alg);
-}
-
-static void __exit md5_mod_fini(void)
-{
-	crypto_unregister_shash(&alg);
-}
-
-module_init(md5_mod_init);
-module_exit(md5_mod_fini);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("MD5 Message Digest Algorithm (OCTEON)");
-MODULE_AUTHOR("Aaro Koskinen <aaro.koskinen@iki.fi>");
diff --git a/arch/mips/cavium-octeon/crypto/octeon-crypto.c b/arch/mips/cavium-octeon/octeon-crypto.c
index 0ff8559391f5..0ff8559391f5 100644
--- a/arch/mips/cavium-octeon/crypto/octeon-crypto.c
+++ b/arch/mips/cavium-octeon/octeon-crypto.c
diff --git a/arch/mips/configs/cavium_octeon_defconfig b/arch/mips/configs/cavium_octeon_defconfig
index 3f50e1d78894..68c363366bce 100644
--- a/arch/mips/configs/cavium_octeon_defconfig
+++ b/arch/mips/configs/cavium_octeon_defconfig
@@ -155,7 +155,6 @@ CONFIG_SECURITY=y
 CONFIG_SECURITY_NETWORK=y
 CONFIG_CRYPTO_CBC=y
 CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD5_OCTEON=y
 CONFIG_CRYPTO_DES=y
 CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y
 CONFIG_DEBUG_FS=y
diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
index e4bcdb64df6c..2707ab134639 100644
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -273,6 +273,7 @@ CONFIG_DM9102=m
 CONFIG_ULI526X=m
 CONFIG_PCMCIA_XIRCOM=m
 CONFIG_DL2K=m
+CONFIG_SUNDANCE=m
 CONFIG_PCMCIA_FMVJ18X=m
 CONFIG_E100=m
 CONFIG_E1000=m
diff --git a/arch/mips/crypto/Kconfig b/arch/mips/crypto/Kconfig
index 7b91f4ec65bf..6a5bd5074867 100644
--- a/arch/mips/crypto/Kconfig
+++ b/arch/mips/crypto/Kconfig
@@ -2,14 +2,4 @@
 
 menu "Accelerated Cryptographic Algorithms for CPU (mips)"
 
-config CRYPTO_MD5_OCTEON
-	tristate "Digests: MD5 (OCTEON)"
-	depends on CPU_CAVIUM_OCTEON
-	select CRYPTO_MD5
-	select CRYPTO_HASH
-	help
-	  MD5 message digest algorithm (RFC1321)
-
-	  Architecture: mips OCTEON using crypto instructions, when available
-
 endmenu
diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h
index 89f73d1a4ea4..42f88452c920 100644
--- a/arch/mips/include/asm/bitops.h
+++ b/arch/mips/include/asm/bitops.h
@@ -327,7 +327,7 @@ static inline void __clear_bit_unlock(unsigned long nr, volatile unsigned long *
  * Return the bit position (0..63) of the most significant 1 bit in a word
  * Returns -1 if no 1 bit exists
  */
-static __always_inline unsigned long __fls(unsigned long word)
+static __always_inline __attribute_const__ unsigned long __fls(unsigned long word)
 {
 	int num;
 
@@ -393,7 +393,7 @@ static __always_inline unsigned long __fls(unsigned long word)
  * Returns 0..SZLONG-1
  * Undefined if no bit exists, so code should check against 0 first.
  */
-static __always_inline unsigned long __ffs(unsigned long word)
+static __always_inline __attribute_const__ unsigned long __ffs(unsigned long word)
 {
 	return __fls(word & -word);
 }
@@ -405,7 +405,7 @@ static __always_inline unsigned long __ffs(unsigned long word)
  * This is defined the same way as ffs.
  * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
  */
-static inline int fls(unsigned int x)
+static inline __attribute_const__ int fls(unsigned int x)
 {
 	int r;
 
@@ -458,7 +458,7 @@ static inline int fls(unsigned int x)
  * the libc and compiler builtin ffs routines, therefore
  * differs in spirit from the below ffz (man ffs).
  */
-static inline int ffs(int word)
+static inline __attribute_const__ int ffs(int word)
 {
 	if (!word)
 		return 0;
diff --git a/arch/mips/include/asm/floppy.h b/arch/mips/include/asm/floppy.h
index 021d09ae5670..44da2ff91f65 100644
--- a/arch/mips/include/asm/floppy.h
+++ b/arch/mips/include/asm/floppy.h
@@ -34,21 +34,6 @@ static inline void fd_cacheflush(char * addr, long size)
 #define N_FDC 1			/* do you *really* want a second controller? */
 #define N_DRIVE 8
 
-/*
- * The DMA channel used by the floppy controller cannot access data at
- * addresses >= 16MB
- *
- * Went back to the 1MB limit, as some people had problems with the floppy
- * driver otherwise. It doesn't matter much for performance anyway, as most
- * floppy accesses go through the track buffer.
- *
- * On MIPSes using vdma, this actually means that *all* transfers go thru
- * the * track buffer since 0x1000000 is always smaller than KSEG0/1.
- * Actually this needs to be a bit more complicated since the so much different
- * hardware available with MIPS CPUs ...
- */
-#define CROSS_64KB(a, s) ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64)
-
 #define EXTRA_FLOPPY_PARAMS
 
 #include <floppy.h>
diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c
index 1e29efcba46e..5debd9a3854a 100644
--- a/arch/mips/kernel/asm-offsets.c
+++ b/arch/mips/kernel/asm-offsets.c
@@ -9,6 +9,8 @@
  * Kevin Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips.com
  * Copyright (C) 2000 MIPS Technologies, Inc.
  */
+#define COMPILE_OFFSETS
+
 #include <linux/compat.h>
 #include <linux/types.h>
 #include <linux/sched.h>
diff --git a/arch/mips/kernel/process.c b/arch/mips/kernel/process.c
index 02aa6a04a21d..29191fa1801e 100644
--- a/arch/mips/kernel/process.c
+++ b/arch/mips/kernel/process.c
@@ -107,7 +107,7 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
  */
 int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
-	unsigned long clone_flags = args->flags;
+	u64 clone_flags = args->flags;
 	unsigned long usp = args->stack;
 	unsigned long tls = args->tls;
 	struct thread_info *ti = task_thread_info(p);
diff --git a/arch/mips/lantiq/xway/sysctrl.c b/arch/mips/lantiq/xway/sysctrl.c
index 5a75283d17f1..6031a0272d87 100644
--- a/arch/mips/lantiq/xway/sysctrl.c
+++ b/arch/mips/lantiq/xway/sysctrl.c
@@ -497,7 +497,7 @@ void __init ltq_soc_init(void)
 		ifccr = CGU_IFCCR_VR9;
 		pcicr = CGU_PCICR_VR9;
 	} else {
-		clkdev_add_pmu("1e180000.etop", NULL, 1, 0, PMU_PPE);
+		clkdev_add_pmu("1e180000.ethernet", NULL, 1, 0, PMU_PPE);
 	}
 
 	if (!of_machine_is_compatible("lantiq,ase"))
@@ -531,9 +531,9 @@ void __init ltq_soc_init(void)
 						CLOCK_133M, CLOCK_133M);
 		clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0);
 		clkdev_add_pmu("1f203018.usb2-phy", "phy", 1, 0, PMU_USB0_P);
-		clkdev_add_pmu("1e180000.etop", "ppe", 1, 0, PMU_PPE);
-		clkdev_add_cgu("1e180000.etop", "ephycgu", CGU_EPHY);
-		clkdev_add_pmu("1e180000.etop", "ephy", 1, 0, PMU_EPHY);
+		clkdev_add_pmu("1e180000.ethernet", "ppe", 1, 0, PMU_PPE);
+		clkdev_add_cgu("1e180000.ethernet", "ephycgu", CGU_EPHY);
+		clkdev_add_pmu("1e180000.ethernet", "ephy", 1, 0, PMU_EPHY);
 		clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_ASE_SDIO);
 		clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
 	} else if (of_machine_is_compatible("lantiq,grx390")) {
@@ -592,7 +592,7 @@ void __init ltq_soc_init(void)
 		clkdev_add_pmu("1e101000.usb", "otg", 1, 0, PMU_USB0 | PMU_AHBM);
 		clkdev_add_pmu("1f203034.usb2-phy", "phy", 1, 0, PMU_USB1_P);
 		clkdev_add_pmu("1e106000.usb", "otg", 1, 0, PMU_USB1 | PMU_AHBM);
-		clkdev_add_pmu("1e180000.etop", "switch", 1, 0, PMU_SWITCH);
+		clkdev_add_pmu("1e180000.ethernet", "switch", 1, 0, PMU_SWITCH);
 		clkdev_add_pmu("1e103000.sdio", NULL, 1, 0, PMU_SDIO);
 		clkdev_add_pmu("1e103100.deu", NULL, 1, 0, PMU_DEU);
 		clkdev_add_pmu("1e116000.mei", "dfe", 1, 0, PMU_DFE);
diff --git a/arch/nios2/include/asm/entry.h b/arch/nios2/include/asm/entry.h
index bafb7b2ca59f..cb25ed56450a 100644
--- a/arch/nios2/include/asm/entry.h
+++ b/arch/nios2/include/asm/entry.h
@@ -10,7 +10,7 @@
 #ifndef _ASM_NIOS2_ENTRY_H
 #define _ASM_NIOS2_ENTRY_H
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 #include <asm/processor.h>
 #include <asm/registers.h>
@@ -117,5 +117,5 @@
 	addi	sp, sp, SWITCH_STACK_SIZE
 .endm
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif /* _ASM_NIOS2_ENTRY_H */
diff --git a/arch/nios2/include/asm/page.h b/arch/nios2/include/asm/page.h
index 2897ec1b74f6..00a51623d38a 100644
--- a/arch/nios2/include/asm/page.h
+++ b/arch/nios2/include/asm/page.h
@@ -26,7 +26,7 @@
 #define PAGE_OFFSET	\
 	(CONFIG_NIOS2_MEM_BASE + CONFIG_NIOS2_KERNEL_REGION_BASE)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /*
  * This gives the physical RAM offset.
@@ -90,6 +90,6 @@ extern struct page *mem_map;
 
 #include <asm-generic/getorder.h>
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* _ASM_NIOS2_PAGE_H */
diff --git a/arch/nios2/include/asm/processor.h b/arch/nios2/include/asm/processor.h
index eb44130364a9..d9521c3c2df9 100644
--- a/arch/nios2/include/asm/processor.h
+++ b/arch/nios2/include/asm/processor.h
@@ -36,7 +36,7 @@
 /* Kuser helpers is mapped to this user space address */
 #define KUSER_BASE		0x1000
 #define KUSER_SIZE		(PAGE_SIZE)
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 # define TASK_SIZE		0x7FFF0000UL
 # define TASK_UNMAPPED_BASE	(PAGE_ALIGN(TASK_SIZE / 3))
@@ -72,6 +72,6 @@ extern unsigned long __get_wchan(struct task_struct *p);
 
 #define cpu_relax()	barrier()
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_NIOS2_PROCESSOR_H */
diff --git a/arch/nios2/include/asm/ptrace.h b/arch/nios2/include/asm/ptrace.h
index 9da34c3022a2..96cbcd40c7ce 100644
--- a/arch/nios2/include/asm/ptrace.h
+++ b/arch/nios2/include/asm/ptrace.h
@@ -18,7 +18,7 @@
 /* This struct defines the way the registers are stored on the
    stack during a system call.  */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 struct pt_regs {
 	unsigned long  r8;	/* r8-r15 Caller-saved GP registers */
 	unsigned long  r9;
@@ -78,5 +78,5 @@ extern void show_regs(struct pt_regs *);
 
 int do_syscall_trace_enter(void);
 void do_syscall_trace_exit(void);
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif /* _ASM_NIOS2_PTRACE_H */
diff --git a/arch/nios2/include/asm/registers.h b/arch/nios2/include/asm/registers.h
index 95b67dd16f81..165dab26221f 100644
--- a/arch/nios2/include/asm/registers.h
+++ b/arch/nios2/include/asm/registers.h
@@ -6,7 +6,7 @@
 #ifndef _ASM_NIOS2_REGISTERS_H
 #define _ASM_NIOS2_REGISTERS_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <asm/cpuinfo.h>
 #endif
 
@@ -44,7 +44,7 @@
 
 /* tlbmisc register bits */
 #define TLBMISC_PID_SHIFT	4
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #define TLBMISC_PID_MASK	((1UL << cpuinfo.tlb_pid_num_bits) - 1)
 #endif
 #define TLBMISC_WAY_MASK	0xf
diff --git a/arch/nios2/include/asm/setup.h b/arch/nios2/include/asm/setup.h
index 908a1526d1bd..6d3f26a71cb5 100644
--- a/arch/nios2/include/asm/setup.h
+++ b/arch/nios2/include/asm/setup.h
@@ -8,7 +8,7 @@
 
 #include <asm-generic/setup.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #ifdef __KERNEL__
 
 extern char exception_handler_hook[];
@@ -18,6 +18,6 @@ extern char fast_handler_end[];
 extern void pagetable_init(void);
 
 #endif/* __KERNEL__ */
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_NIOS2_SETUP_H */
diff --git a/arch/nios2/include/asm/syscalls.h b/arch/nios2/include/asm/syscalls.h
index b4d4ed3bf9c8..0e214b0a0ac8 100644
--- a/arch/nios2/include/asm/syscalls.h
+++ b/arch/nios2/include/asm/syscalls.h
@@ -7,6 +7,7 @@
 
 int sys_cacheflush(unsigned long addr, unsigned long len,
 				unsigned int op);
+asmlinkage long __sys_clone3(struct clone_args __user *uargs, size_t size);
 
 #include <asm-generic/syscalls.h>
 
diff --git a/arch/nios2/include/asm/thread_info.h b/arch/nios2/include/asm/thread_info.h
index 5abac9893b32..83df79286d62 100644
--- a/arch/nios2/include/asm/thread_info.h
+++ b/arch/nios2/include/asm/thread_info.h
@@ -24,7 +24,7 @@
 #define THREAD_SIZE_ORDER	1
 #define THREAD_SIZE		8192 /* 2 * PAGE_SIZE */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /*
  * low level task data that entry.S needs immediate access to
@@ -61,7 +61,7 @@ static inline struct thread_info *current_thread_info(void)
 
 	return (struct thread_info *)(sp & ~(THREAD_SIZE - 1));
 }
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 /*
  * thread information flags
diff --git a/arch/nios2/include/asm/traps.h b/arch/nios2/include/asm/traps.h
index afd77bef01c6..133a3dedbc3e 100644
--- a/arch/nios2/include/asm/traps.h
+++ b/arch/nios2/include/asm/traps.h
@@ -12,7 +12,7 @@
 
 #define TRAP_ID_SYSCALL		0
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 void _exception(int signo, struct pt_regs *regs, int code, unsigned long addr);
 void do_page_fault(struct pt_regs *regs, unsigned long cause,
 		   unsigned long address);
diff --git a/arch/nios2/include/asm/unistd.h b/arch/nios2/include/asm/unistd.h
index 1146e56473c5..213f6de3cf7b 100644
--- a/arch/nios2/include/asm/unistd.h
+++ b/arch/nios2/include/asm/unistd.h
@@ -7,6 +7,4 @@
 #define __ARCH_WANT_STAT64
 #define __ARCH_WANT_SET_GET_RLIMIT
 
-#define __ARCH_BROKEN_SYS_CLONE3
-
 #endif
diff --git a/arch/nios2/include/uapi/asm/ptrace.h b/arch/nios2/include/uapi/asm/ptrace.h
index 2b91dbe5bcfe..1298db9f0fc9 100644
--- a/arch/nios2/include/uapi/asm/ptrace.h
+++ b/arch/nios2/include/uapi/asm/ptrace.h
@@ -13,7 +13,7 @@
 #ifndef _UAPI_ASM_NIOS2_PTRACE_H
 #define _UAPI_ASM_NIOS2_PTRACE_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/types.h>
 
@@ -80,5 +80,5 @@ struct user_pt_regs {
 	__u32		regs[49];
 };
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif /* _UAPI_ASM_NIOS2_PTRACE_H */
diff --git a/arch/nios2/kernel/asm-offsets.c b/arch/nios2/kernel/asm-offsets.c
index e3d9b7b6fb48..88190b503ce5 100644
--- a/arch/nios2/kernel/asm-offsets.c
+++ b/arch/nios2/kernel/asm-offsets.c
@@ -2,6 +2,7 @@
 /*
  * Copyright (C) 2011 Tobias Klauser <tklauser@distanz.ch>
  */
+#define COMPILE_OFFSETS
 
 #include <linux/stddef.h>
 #include <linux/sched.h>
diff --git a/arch/nios2/kernel/entry.S b/arch/nios2/kernel/entry.S
index 99f0a65e6234..dd40dfd908e5 100644
--- a/arch/nios2/kernel/entry.S
+++ b/arch/nios2/kernel/entry.S
@@ -403,6 +403,12 @@ ENTRY(sys_clone)
 	addi    sp, sp, 4
 	RESTORE_SWITCH_STACK
 	ret
+/* long syscall(SYS_clone3, struct clone_args *cl_args, size_t size); */
+ENTRY(__sys_clone3)
+	SAVE_SWITCH_STACK
+	call	sys_clone3
+	RESTORE_SWITCH_STACK
+	ret
 
 ENTRY(sys_rt_sigreturn)
 	SAVE_SWITCH_STACK
diff --git a/arch/nios2/kernel/process.c b/arch/nios2/kernel/process.c
index f84021303f6a..151404139085 100644
--- a/arch/nios2/kernel/process.c
+++ b/arch/nios2/kernel/process.c
@@ -101,7 +101,7 @@ void flush_thread(void)
 
 int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
-	unsigned long clone_flags = args->flags;
+	u64 clone_flags = args->flags;
 	unsigned long usp = args->stack;
 	unsigned long tls = args->tls;
 	struct pt_regs *childregs = task_pt_regs(p);
diff --git a/arch/nios2/kernel/setup.c b/arch/nios2/kernel/setup.c
index 2a40150142c3..f43f01c4ab93 100644
--- a/arch/nios2/kernel/setup.c
+++ b/arch/nios2/kernel/setup.c
@@ -142,6 +142,20 @@ static void __init find_limits(unsigned long *min, unsigned long *max_low,
 	*max_high = PFN_DOWN(memblock_end_of_DRAM());
 }
 
+static void __init adjust_lowmem_bounds(void)
+{
+	phys_addr_t block_start, block_end;
+	u64 i;
+	phys_addr_t memblock_limit = 0;
+
+	for_each_mem_range(i, &block_start, &block_end) {
+		if (block_end > memblock_limit)
+			memblock_limit = block_end;
+	}
+
+	memblock_set_current_limit(memblock_limit);
+}
+
 void __init setup_arch(char **cmdline_p)
 {
 	console_verbose();
@@ -157,6 +171,7 @@ void __init setup_arch(char **cmdline_p)
 	/* Keep a copy of command line */
 	*cmdline_p = boot_command_line;
 
+	adjust_lowmem_bounds();
 	find_limits(&min_low_pfn, &max_low_pfn, &max_pfn);
 
 	memblock_reserve(__pa_symbol(_stext), _end - _stext);
diff --git a/arch/nios2/kernel/syscall_table.c b/arch/nios2/kernel/syscall_table.c
index 434694067d8f..c99818aac9e1 100644
--- a/arch/nios2/kernel/syscall_table.c
+++ b/arch/nios2/kernel/syscall_table.c
@@ -13,6 +13,7 @@
 #define __SYSCALL_WITH_COMPAT(nr, native, compat)        __SYSCALL(nr, native)
 
 #define sys_mmap2 sys_mmap_pgoff
+#define sys_clone3 __sys_clone3
 
 void *sys_call_table[__NR_syscalls] = {
 	[0 ... __NR_syscalls-1] = sys_ni_syscall,
diff --git a/arch/openrisc/include/asm/bitops/__ffs.h b/arch/openrisc/include/asm/bitops/__ffs.h
index 1e224b616fdf..4827b66530b2 100644
--- a/arch/openrisc/include/asm/bitops/__ffs.h
+++ b/arch/openrisc/include/asm/bitops/__ffs.h
@@ -11,7 +11,7 @@
 
 #ifdef CONFIG_OPENRISC_HAVE_INST_FF1
 
-static inline unsigned long __ffs(unsigned long x)
+static inline __attribute_const__ unsigned long __ffs(unsigned long x)
 {
 	int ret;
 
diff --git a/arch/openrisc/include/asm/bitops/__fls.h b/arch/openrisc/include/asm/bitops/__fls.h
index 9658446ad141..637cc76fe4b7 100644
--- a/arch/openrisc/include/asm/bitops/__fls.h
+++ b/arch/openrisc/include/asm/bitops/__fls.h
@@ -11,7 +11,7 @@
 
 #ifdef CONFIG_OPENRISC_HAVE_INST_FL1
 
-static inline unsigned long __fls(unsigned long x)
+static inline __attribute_const__ unsigned long __fls(unsigned long x)
 {
 	int ret;
 
diff --git a/arch/openrisc/include/asm/bitops/ffs.h b/arch/openrisc/include/asm/bitops/ffs.h
index b4c835d6bc84..536a60ab9cc3 100644
--- a/arch/openrisc/include/asm/bitops/ffs.h
+++ b/arch/openrisc/include/asm/bitops/ffs.h
@@ -10,7 +10,7 @@
 
 #ifdef CONFIG_OPENRISC_HAVE_INST_FF1
 
-static inline int ffs(int x)
+static inline __attribute_const__ int ffs(int x)
 {
 	int ret;
 
diff --git a/arch/openrisc/include/asm/bitops/fls.h b/arch/openrisc/include/asm/bitops/fls.h
index 6b77f6556fb9..77da7639bb3e 100644
--- a/arch/openrisc/include/asm/bitops/fls.h
+++ b/arch/openrisc/include/asm/bitops/fls.h
@@ -11,7 +11,7 @@
 
 #ifdef CONFIG_OPENRISC_HAVE_INST_FL1
 
-static inline int fls(unsigned int x)
+static inline __attribute_const__ int fls(unsigned int x)
 {
 	int ret;
 
diff --git a/arch/openrisc/kernel/asm-offsets.c b/arch/openrisc/kernel/asm-offsets.c
index 710651d5aaae..3cc826f2216b 100644
--- a/arch/openrisc/kernel/asm-offsets.c
+++ b/arch/openrisc/kernel/asm-offsets.c
@@ -18,6 +18,7 @@
  * compile this file to assembler, and then extract the
  * #defines from the assembly-language output.
  */
+#define COMPILE_OFFSETS
 
 #include <linux/signal.h>
 #include <linux/sched.h>
diff --git a/arch/openrisc/kernel/process.c b/arch/openrisc/kernel/process.c
index eef99fee2110..73ffb9fa3118 100644
--- a/arch/openrisc/kernel/process.c
+++ b/arch/openrisc/kernel/process.c
@@ -165,7 +165,7 @@ extern asmlinkage void ret_from_fork(void);
 int
 copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
-	unsigned long clone_flags = args->flags;
+	u64 clone_flags = args->flags;
 	unsigned long usp = args->stack;
 	unsigned long tls = args->tls;
 	struct pt_regs *userregs;
diff --git a/arch/parisc/Kconfig b/arch/parisc/Kconfig
index 2efa4b08b7b8..0940c162f1f7 100644
--- a/arch/parisc/Kconfig
+++ b/arch/parisc/Kconfig
@@ -44,6 +44,7 @@ config PARISC
 	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_ARCH_TOPOLOGY if SMP
+	select ARCH_SUPPORTS_SCHED_MC if SMP && PA8X00
 	select GENERIC_CPU_DEVICES if !SMP
 	select GENERIC_LIB_DEVMEM_IS_ALLOWED
 	select SYSCTL_ARCH_UNALIGN_ALLOW
@@ -319,14 +320,6 @@ config SMP
 
 	  If you don't know what to do here, say N.
 
-config SCHED_MC
-	bool "Multi-core scheduler support"
-	depends on GENERIC_ARCH_TOPOLOGY && PA8X00
-	help
-	  Multi-core scheduler support improves the CPU scheduler's decision
-	  making when dealing with multi-core CPU chips at a cost of slightly
-	  increased overhead in some places. If unsure say N here.
-
 config IRQSTACKS
 	bool "Use separate kernel stacks when processing interrupts"
 	default y
diff --git a/arch/parisc/include/asm/bitops.h b/arch/parisc/include/asm/bitops.h
index 0ec9cfc5131f..bd1280a8a5ec 100644
--- a/arch/parisc/include/asm/bitops.h
+++ b/arch/parisc/include/asm/bitops.h
@@ -123,7 +123,7 @@ static __inline__ int test_and_change_bit(int nr, volatile unsigned long * addr)
  * cycles for each mispredicted branch.
  */
 
-static __inline__ unsigned long __ffs(unsigned long x)
+static __inline__ __attribute_const__ unsigned long __ffs(unsigned long x)
 {
 	unsigned long ret;
 
@@ -161,7 +161,7 @@ static __inline__ unsigned long __ffs(unsigned long x)
  * This is defined the same way as the libc and compiler builtin
  * ffs routines, therefore differs in spirit from the above ffz (man ffs).
  */
-static __inline__ int ffs(int x)
+static __inline__ __attribute_const__ int ffs(int x)
 {
 	return x ? (__ffs((unsigned long)x) + 1) : 0;
 }
@@ -171,7 +171,7 @@ static __inline__ int ffs(int x)
  * fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
  */
 
-static __inline__ int fls(unsigned int x)
+static __inline__ __attribute_const__ int fls(unsigned int x)
 {
 	int ret;
 	if (!x)
diff --git a/arch/parisc/include/asm/floppy.h b/arch/parisc/include/asm/floppy.h
index b318a7df52f6..f15b69fea901 100644
--- a/arch/parisc/include/asm/floppy.h
+++ b/arch/parisc/include/asm/floppy.h
@@ -8,9 +8,9 @@
 #ifndef __ASM_PARISC_FLOPPY_H
 #define __ASM_PARISC_FLOPPY_H
 
+#include <linux/sizes.h>
 #include <linux/vmalloc.h>
 
-
 /*
  * The DMA channel used by the floppy controller cannot access data at
  * addresses >= 16MB
@@ -20,15 +20,12 @@
  * floppy accesses go through the track buffer.
  */
 #define _CROSS_64KB(a,s,vdma) \
-(!(vdma) && ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64))
-
-#define CROSS_64KB(a,s) _CROSS_64KB(a,s,use_virtual_dma & 1)
-
+	(!(vdma) && \
+	 ((unsigned long)(a) / SZ_64K != ((unsigned long)(a) + (s) - 1) / SZ_64K))
 
 #define SW fd_routine[use_virtual_dma&1]
 #define CSW fd_routine[can_use_virtual_dma & 1]
 
-
 #define fd_inb(base, reg)		readb((base) + (reg))
 #define fd_outb(value, base, reg)	writeb(value, (base) + (reg))
 
@@ -206,7 +203,7 @@ static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
 static int hard_dma_setup(char *addr, unsigned long size, int mode, int io)
 {
 #ifdef FLOPPY_SANITY_CHECK
-	if (CROSS_64KB(addr, size)) {
+	if (_CROSS_64KB(addr, size, use_virtual_dma & 1)) {
 		printk("DMA crossing 64-K boundary %p-%p\n", addr, addr+size);
 		return -1;
 	}
diff --git a/arch/parisc/kernel/asm-offsets.c b/arch/parisc/kernel/asm-offsets.c
index 757816a7bd4b..9abfe65492c6 100644
--- a/arch/parisc/kernel/asm-offsets.c
+++ b/arch/parisc/kernel/asm-offsets.c
@@ -13,6 +13,7 @@
  *    Copyright (C) 2002 Randolph Chung <tausq with parisc-linux.org>
  *    Copyright (C) 2003 James Bottomley <jejb at parisc-linux.org>
  */
+#define COMPILE_OFFSETS
 
 #include <linux/types.h>
 #include <linux/sched.h>
diff --git a/arch/parisc/kernel/process.c b/arch/parisc/kernel/process.c
index ed93bd8c1545..e64ab5d2a40d 100644
--- a/arch/parisc/kernel/process.c
+++ b/arch/parisc/kernel/process.c
@@ -201,7 +201,7 @@ arch_initcall(parisc_idle_init);
 int
 copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
-	unsigned long clone_flags = args->flags;
+	u64 clone_flags = args->flags;
 	unsigned long usp = args->stack;
 	unsigned long tls = args->tls;
 	struct pt_regs *cregs = &(p->thread.regs);
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 93402a1d9c9f..22173a897670 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -170,6 +170,9 @@ config PPC
 	select ARCH_STACKWALK
 	select ARCH_SUPPORTS_ATOMIC_RMW
 	select ARCH_SUPPORTS_DEBUG_PAGEALLOC	if PPC_BOOK3S || PPC_8xx
+	select ARCH_SUPPORTS_SCHED_MC		if SMP
+	select ARCH_SUPPORTS_SCHED_SMT		if PPC64 && SMP
+	select SCHED_MC				if ARCH_SUPPORTS_SCHED_MC
 	select ARCH_USE_BUILTIN_BSWAP
 	select ARCH_USE_CMPXCHG_LOCKREF		if PPC64
 	select ARCH_USE_MEMTEST
@@ -207,8 +210,6 @@ config PPC
 	select GENERIC_PCI_IOMAP		if PCI
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_TIME_VSYSCALL
-	select GENERIC_VDSO_DATA_STORE
-	select GENERIC_VDSO_TIME_NS
 	select HAS_IOPORT			if PCI
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_HUGE_VMALLOC		if HAVE_ARCH_HUGE_VMAP
@@ -243,12 +244,14 @@ config PPC
 	select HAVE_EFFICIENT_UNALIGNED_ACCESS
 	select HAVE_GUP_FAST
 	select HAVE_FTRACE_GRAPH_FUNC
+	select HAVE_FTRACE_REGS_HAVING_PT_REGS
 	select HAVE_FUNCTION_ARG_ACCESS_API
 	select HAVE_FUNCTION_DESCRIPTORS	if PPC64_ELF_ABI_V1
 	select HAVE_FUNCTION_ERROR_INJECTION
+	select HAVE_FUNCTION_GRAPH_FREGS
 	select HAVE_FUNCTION_GRAPH_TRACER
 	select HAVE_FUNCTION_TRACER		if !COMPILE_TEST && (PPC64 || (PPC32 && CC_IS_GCC))
-	select HAVE_GCC_PLUGINS			if GCC_VERSION >= 50200   # plugin support on gcc <= 5.1 is buggy on PPC
+	select HAVE_GCC_PLUGINS
 	select HAVE_GENERIC_VDSO
 	select HAVE_HARDLOCKUP_DETECTOR_ARCH	if PPC_BOOK3S_64 && SMP
 	select HAVE_HARDLOCKUP_DETECTOR_PERF	if PERF_EVENTS && HAVE_PERF_EVENTS_NMI
@@ -963,14 +966,6 @@ config PPC_PROT_SAO_LPAR
 config PPC_COPRO_BASE
 	bool
 
-config SCHED_SMT
-	bool "SMT (Hyperthreading) scheduler support"
-	depends on PPC64 && SMP
-	help
-	  SMT scheduler support improves the CPU scheduler's decision making
-	  when dealing with POWER5 cpus at a cost of slightly increased
-	  overhead in some places. If unsure say N here.
-
 config PPC_DENORMALISATION
 	bool "PowerPC denormalisation exception handling"
 	depends on PPC_BOOK3S_64
diff --git a/arch/powerpc/Makefile b/arch/powerpc/Makefile
index 9753fb87217c..a58b1029592c 100644
--- a/arch/powerpc/Makefile
+++ b/arch/powerpc/Makefile
@@ -58,7 +58,7 @@ ifeq ($(CONFIG_PPC64)$(CONFIG_LD_IS_BFD),yy)
 # There is a corresponding test in arch/powerpc/lib/Makefile
 KBUILD_LDFLAGS_MODULE += --save-restore-funcs
 else
-KBUILD_LDFLAGS_MODULE += arch/powerpc/lib/crtsavres.o
+KBUILD_LDFLAGS_MODULE += $(objtree)/arch/powerpc/lib/crtsavres.o
 endif
 
 ifdef CONFIG_CPU_LITTLE_ENDIAN
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index a7ab087d412c..c47b78c1d3e7 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -243,13 +243,13 @@ $(obj)/wrapper.a: $(obj-wlib) FORCE
 hostprogs	:= addnote hack-coff mktree
 
 targets		+= $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a) zImage.lds
-extra-y		:= $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
+always-y	:= $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
 		   $(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds
 
 dtstree		:= $(src)/dts
 
 wrapper		:= $(src)/wrapper
-wrapperbits	:= $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree) \
+wrapperbits	:= $(always-y) $(addprefix $(obj)/,addnote hack-coff mktree) \
 			$(wrapper) FORCE
 
 #############
@@ -456,7 +456,7 @@ WRAPPER_DTSDIR := /usr/lib/kernel-wrapper/dts
 WRAPPER_BINDIR := /usr/sbin
 INSTALL := install
 
-extra-installed		:= $(patsubst $(obj)/%, $(DESTDIR)$(WRAPPER_OBJDIR)/%, $(extra-y))
+extra-installed		:= $(patsubst $(obj)/%, $(DESTDIR)$(WRAPPER_OBJDIR)/%, $(always-y))
 hostprogs-installed	:= $(patsubst %, $(DESTDIR)$(WRAPPER_BINDIR)/%, $(hostprogs))
 wrapper-installed	:= $(DESTDIR)$(WRAPPER_BINDIR)/wrapper
 dts-installed		:= $(patsubst $(dtstree)/%, $(DESTDIR)$(WRAPPER_DTSDIR)/%, $(wildcard $(dtstree)/*.dts))
diff --git a/arch/powerpc/boot/install.sh b/arch/powerpc/boot/install.sh
index 101fcb397a0f..c3df6c27ce75 100755
--- a/arch/powerpc/boot/install.sh
+++ b/arch/powerpc/boot/install.sh
@@ -19,19 +19,19 @@
 set -e
 
 # this should work for both the pSeries zImage and the iSeries vmlinux.sm
-image_name=`basename $2`
+image_name=$(basename "$2")
 
 
 echo "Warning: '${INSTALLKERNEL}' command not available... Copying" \
      "directly to $4/$image_name-$1" >&2
 
-if [ -f $4/$image_name-$1 ]; then
-	mv $4/$image_name-$1 $4/$image_name-$1.old
+if [ -f "$4"/"$image_name"-"$1" ]; then
+	mv "$4"/"$image_name"-"$1" "$4"/"$image_name"-"$1".old
 fi
 
-if [ -f $4/System.map-$1 ]; then
-	mv $4/System.map-$1 $4/System-$1.old
+if [ -f "$4"/System.map-"$1" ]; then
+	mv "$4"/System.map-"$1" "$4"/System-"$1".old
 fi
 
-cat $2 > $4/$image_name-$1
-cp $3 $4/System.map-$1
+cat "$2" > "$4"/"$image_name"-"$1"
+cp "$3" "$4"/System.map-"$1"
diff --git a/arch/powerpc/boot/page.h b/arch/powerpc/boot/page.h
index c3d55fc8f34c..e44a3119720d 100644
--- a/arch/powerpc/boot/page.h
+++ b/arch/powerpc/boot/page.h
@@ -5,7 +5,7 @@
  * Copyright (C) 2001 PPC64 Team, IBM Corp
  */
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #define ASM_CONST(x) x
 #else
 #define __ASM_CONST(x) x##UL
diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper
index 3d8dc822282a..a75baefd1cff 100755
--- a/arch/powerpc/boot/wrapper
+++ b/arch/powerpc/boot/wrapper
@@ -226,11 +226,7 @@ ld_is_lld()
 
 # Do not include PT_INTERP segment when linking pie. Non-pie linking
 # just ignores this option.
-LD_VERSION=$(${CROSS}ld --version | ld_version)
-LD_NO_DL_MIN_VERSION=$(echo 2.26 | ld_version)
-if [ "$LD_VERSION" -ge "$LD_NO_DL_MIN_VERSION" ] ; then
-	nodl="--no-dynamic-linker"
-fi
+nodl="--no-dynamic-linker"
 
 # suppress some warnings in recent ld versions
 nowarn="-z noexecstack"
diff --git a/arch/powerpc/configs/powernv_defconfig b/arch/powerpc/configs/powernv_defconfig
index d06388b0f66e..bd4685612de6 100644
--- a/arch/powerpc/configs/powernv_defconfig
+++ b/arch/powerpc/configs/powernv_defconfig
@@ -320,7 +320,6 @@ CONFIG_XMON=y
 CONFIG_CRYPTO_BENCHMARK=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD5_PPC=m
 CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_WP512=m
diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig
index ce34597e9f3e..2d92c11eea7e 100644
--- a/arch/powerpc/configs/ppc64_defconfig
+++ b/arch/powerpc/configs/ppc64_defconfig
@@ -387,7 +387,6 @@ CONFIG_CRYPTO_MICHAEL_MIC=m
 CONFIG_CRYPTO_SHA256=y
 CONFIG_CRYPTO_WP512=m
 CONFIG_CRYPTO_LZO=m
-CONFIG_CRYPTO_MD5_PPC=m
 CONFIG_CRYPTO_AES_GCM_P10=m
 CONFIG_CRYPTO_DEV_NX=y
 CONFIG_CRYPTO_DEV_NX_ENCRYPT=m
diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig
index bb359643ddc1..b082c1fae13c 100644
--- a/arch/powerpc/configs/ppc6xx_defconfig
+++ b/arch/powerpc/configs/ppc6xx_defconfig
@@ -433,6 +433,7 @@ CONFIG_DM9102=m
 CONFIG_ULI526X=m
 CONFIG_PCMCIA_XIRCOM=m
 CONFIG_DL2K=m
+CONFIG_SUNDANCE=m
 CONFIG_S2IO=m
 CONFIG_FEC_MPC52xx=m
 CONFIG_GIANFAR=m
diff --git a/arch/powerpc/crypto/Kconfig b/arch/powerpc/crypto/Kconfig
index cfe39fc221cf..662aed46f9c7 100644
--- a/arch/powerpc/crypto/Kconfig
+++ b/arch/powerpc/crypto/Kconfig
@@ -2,27 +2,6 @@
 
 menu "Accelerated Cryptographic Algorithms for CPU (powerpc)"
 
-config CRYPTO_CURVE25519_PPC64
-	tristate
-	depends on PPC64 && CPU_LITTLE_ENDIAN
-	select CRYPTO_KPP
-	select CRYPTO_LIB_CURVE25519_GENERIC
-	select CRYPTO_ARCH_HAVE_LIB_CURVE25519
-	default CRYPTO_LIB_CURVE25519_INTERNAL
-	help
-	  Curve25519 algorithm
-
-	  Architecture: PowerPC64
-	  - Little-endian
-
-config CRYPTO_MD5_PPC
-	tristate "Digests: MD5"
-	select CRYPTO_HASH
-	help
-	  MD5 message digest algorithm (RFC1321)
-
-	  Architecture: powerpc
-
 config CRYPTO_AES_PPC_SPE
 	tristate "Ciphers: AES, modes: ECB/CBC/CTR/XTS (SPE)"
 	depends on SPE
diff --git a/arch/powerpc/crypto/Makefile b/arch/powerpc/crypto/Makefile
index bc8fd27344b8..5960e5300db7 100644
--- a/arch/powerpc/crypto/Makefile
+++ b/arch/powerpc/crypto/Makefile
@@ -6,16 +6,12 @@
 #
 
 obj-$(CONFIG_CRYPTO_AES_PPC_SPE) += aes-ppc-spe.o
-obj-$(CONFIG_CRYPTO_MD5_PPC) += md5-ppc.o
 obj-$(CONFIG_CRYPTO_AES_GCM_P10) += aes-gcm-p10-crypto.o
 obj-$(CONFIG_CRYPTO_DEV_VMX_ENCRYPT) += vmx-crypto.o
-obj-$(CONFIG_CRYPTO_CURVE25519_PPC64) += curve25519-ppc64le.o
 
 aes-ppc-spe-y := aes-spe-core.o aes-spe-keys.o aes-tab-4k.o aes-spe-modes.o aes-spe-glue.o
-md5-ppc-y := md5-asm.o md5-glue.o
 aes-gcm-p10-crypto-y := aes-gcm-p10-glue.o aes-gcm-p10.o ghashp10-ppc.o aesp10-ppc.o
 vmx-crypto-objs := vmx.o aesp8-ppc.o ghashp8-ppc.o aes.o aes_cbc.o aes_ctr.o aes_xts.o ghash.o
-curve25519-ppc64le-y := curve25519-ppc64le-core.o curve25519-ppc64le_asm.o
 
 ifeq ($(CONFIG_CPU_LITTLE_ENDIAN),y)
 override flavour := linux-ppc64le
diff --git a/arch/powerpc/crypto/curve25519-ppc64le-core.c b/arch/powerpc/crypto/curve25519-ppc64le-core.c
deleted file mode 100644
index f7810be0b292..000000000000
--- a/arch/powerpc/crypto/curve25519-ppc64le-core.c
+++ /dev/null
@@ -1,300 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Copyright 2024- IBM Corp.
- *
- * X25519 scalar multiplication with 51 bits limbs for PPC64le.
- *   Based on RFC7748 and AArch64 optimized implementation for X25519
- *     - Algorithm 1 Scalar multiplication of a variable point
- */
-
-#include <crypto/curve25519.h>
-#include <crypto/internal/kpp.h>
-
-#include <linux/types.h>
-#include <linux/jump_label.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/scatterlist.h>
-
-#include <linux/cpufeature.h>
-#include <linux/processor.h>
-
-typedef uint64_t fe51[5];
-
-asmlinkage void x25519_fe51_mul(fe51 h, const fe51 f, const fe51 g);
-asmlinkage void x25519_fe51_sqr(fe51 h, const fe51 f);
-asmlinkage void x25519_fe51_mul121666(fe51 h, fe51 f);
-asmlinkage void x25519_fe51_sqr_times(fe51 h, const fe51 f, int n);
-asmlinkage void x25519_fe51_frombytes(fe51 h, const uint8_t *s);
-asmlinkage void x25519_fe51_tobytes(uint8_t *s, const fe51 h);
-asmlinkage void x25519_cswap(fe51 p, fe51 q, unsigned int bit);
-
-#define fmul x25519_fe51_mul
-#define fsqr x25519_fe51_sqr
-#define fmul121666 x25519_fe51_mul121666
-#define fe51_tobytes x25519_fe51_tobytes
-
-static void fadd(fe51 h, const fe51 f, const fe51 g)
-{
-	h[0] = f[0] + g[0];
-	h[1] = f[1] + g[1];
-	h[2] = f[2] + g[2];
-	h[3] = f[3] + g[3];
-	h[4] = f[4] + g[4];
-}
-
-/*
- * Prime = 2 ** 255 - 19, 255 bits
- *    (0x7fffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffff ffffffed)
- *
- * Prime in 5 51-bit limbs
- */
-static fe51 prime51 = { 0x7ffffffffffed, 0x7ffffffffffff, 0x7ffffffffffff, 0x7ffffffffffff, 0x7ffffffffffff};
-
-static void fsub(fe51 h, const fe51 f, const fe51 g)
-{
-	h[0] = (f[0] + ((prime51[0] * 2))) - g[0];
-	h[1] = (f[1] + ((prime51[1] * 2))) - g[1];
-	h[2] = (f[2] + ((prime51[2] * 2))) - g[2];
-	h[3] = (f[3] + ((prime51[3] * 2))) - g[3];
-	h[4] = (f[4] + ((prime51[4] * 2))) - g[4];
-}
-
-static void fe51_frombytes(fe51 h, const uint8_t *s)
-{
-	/*
-	 * Make sure 64-bit aligned.
-	 */
-	unsigned char sbuf[32+8];
-	unsigned char *sb = PTR_ALIGN((void *)sbuf, 8);
-
-	memcpy(sb, s, 32);
-	x25519_fe51_frombytes(h, sb);
-}
-
-static void finv(fe51 o, const fe51 i)
-{
-	fe51 a0, b, c, t00;
-
-	fsqr(a0, i);
-	x25519_fe51_sqr_times(t00, a0, 2);
-
-	fmul(b, t00, i);
-	fmul(a0, b, a0);
-
-	fsqr(t00, a0);
-
-	fmul(b, t00, b);
-	x25519_fe51_sqr_times(t00, b, 5);
-
-	fmul(b, t00, b);
-	x25519_fe51_sqr_times(t00, b, 10);
-
-	fmul(c, t00, b);
-	x25519_fe51_sqr_times(t00, c, 20);
-
-	fmul(t00, t00, c);
-	x25519_fe51_sqr_times(t00, t00, 10);
-
-	fmul(b, t00, b);
-	x25519_fe51_sqr_times(t00, b, 50);
-
-	fmul(c, t00, b);
-	x25519_fe51_sqr_times(t00, c, 100);
-
-	fmul(t00, t00, c);
-	x25519_fe51_sqr_times(t00, t00, 50);
-
-	fmul(t00, t00, b);
-	x25519_fe51_sqr_times(t00, t00, 5);
-
-	fmul(o, t00, a0);
-}
-
-static void curve25519_fe51(uint8_t out[32], const uint8_t scalar[32],
-			    const uint8_t point[32])
-{
-	fe51 x1, x2, z2, x3, z3;
-	uint8_t s[32];
-	unsigned int swap = 0;
-	int i;
-
-	memcpy(s, scalar, 32);
-	s[0]  &= 0xf8;
-	s[31] &= 0x7f;
-	s[31] |= 0x40;
-	fe51_frombytes(x1, point);
-
-	z2[0] = z2[1] = z2[2] = z2[3] = z2[4] = 0;
-	x3[0] = x1[0];
-	x3[1] = x1[1];
-	x3[2] = x1[2];
-	x3[3] = x1[3];
-	x3[4] = x1[4];
-
-	x2[0] = z3[0] = 1;
-	x2[1] = z3[1] = 0;
-	x2[2] = z3[2] = 0;
-	x2[3] = z3[3] = 0;
-	x2[4] = z3[4] = 0;
-
-	for (i = 254; i >= 0; --i) {
-		unsigned int k_t = 1 & (s[i / 8] >> (i & 7));
-		fe51 a, b, c, d, e;
-		fe51 da, cb, aa, bb;
-		fe51 dacb_p, dacb_m;
-
-		swap ^= k_t;
-		x25519_cswap(x2, x3, swap);
-		x25519_cswap(z2, z3, swap);
-		swap = k_t;
-
-		fsub(b, x2, z2);		// B = x_2 - z_2
-		fadd(a, x2, z2);		// A = x_2 + z_2
-		fsub(d, x3, z3);		// D = x_3 - z_3
-		fadd(c, x3, z3);		// C = x_3 + z_3
-
-		fsqr(bb, b);			// BB = B^2
-		fsqr(aa, a);			// AA = A^2
-		fmul(da, d, a);			// DA = D * A
-		fmul(cb, c, b);			// CB = C * B
-
-		fsub(e, aa, bb);		// E = AA - BB
-		fmul(x2, aa, bb);		// x2 = AA * BB
-		fadd(dacb_p, da, cb);		// DA + CB
-		fsub(dacb_m, da, cb);		// DA - CB
-
-		fmul121666(z3, e);		// 121666 * E
-		fsqr(z2, dacb_m);		// (DA - CB)^2
-		fsqr(x3, dacb_p);		// x3 = (DA + CB)^2
-		fadd(b, bb, z3);		// BB + 121666 * E
-		fmul(z3, x1, z2);		// z3 = x1 * (DA - CB)^2
-		fmul(z2, e, b);		// z2 = e * (BB + (DA + CB)^2)
-	}
-
-	finv(z2, z2);
-	fmul(x2, x2, z2);
-	fe51_tobytes(out, x2);
-}
-
-void curve25519_arch(u8 mypublic[CURVE25519_KEY_SIZE],
-		     const u8 secret[CURVE25519_KEY_SIZE],
-		     const u8 basepoint[CURVE25519_KEY_SIZE])
-{
-	curve25519_fe51(mypublic, secret, basepoint);
-}
-EXPORT_SYMBOL(curve25519_arch);
-
-void curve25519_base_arch(u8 pub[CURVE25519_KEY_SIZE],
-			  const u8 secret[CURVE25519_KEY_SIZE])
-{
-	curve25519_fe51(pub, secret, curve25519_base_point);
-}
-EXPORT_SYMBOL(curve25519_base_arch);
-
-static int curve25519_set_secret(struct crypto_kpp *tfm, const void *buf,
-				 unsigned int len)
-{
-	u8 *secret = kpp_tfm_ctx(tfm);
-
-	if (!len)
-		curve25519_generate_secret(secret);
-	else if (len == CURVE25519_KEY_SIZE &&
-		 crypto_memneq(buf, curve25519_null_point, CURVE25519_KEY_SIZE))
-		memcpy(secret, buf, CURVE25519_KEY_SIZE);
-	else
-		return -EINVAL;
-	return 0;
-}
-
-static int curve25519_generate_public_key(struct kpp_request *req)
-{
-	struct crypto_kpp *tfm = crypto_kpp_reqtfm(req);
-	const u8 *secret = kpp_tfm_ctx(tfm);
-	u8 buf[CURVE25519_KEY_SIZE];
-	int copied, nbytes;
-
-	if (req->src)
-		return -EINVAL;
-
-	curve25519_base_arch(buf, secret);
-
-	/* might want less than we've got */
-	nbytes = min_t(size_t, CURVE25519_KEY_SIZE, req->dst_len);
-	copied = sg_copy_from_buffer(req->dst, sg_nents_for_len(req->dst,
-								nbytes),
-				     buf, nbytes);
-	if (copied != nbytes)
-		return -EINVAL;
-	return 0;
-}
-
-static int curve25519_compute_shared_secret(struct kpp_request *req)
-{
-	struct crypto_kpp *tfm = crypto_kpp_reqtfm(req);
-	const u8 *secret = kpp_tfm_ctx(tfm);
-	u8 public_key[CURVE25519_KEY_SIZE];
-	u8 buf[CURVE25519_KEY_SIZE];
-	int copied, nbytes;
-
-	if (!req->src)
-		return -EINVAL;
-
-	copied = sg_copy_to_buffer(req->src,
-				   sg_nents_for_len(req->src,
-						    CURVE25519_KEY_SIZE),
-				   public_key, CURVE25519_KEY_SIZE);
-	if (copied != CURVE25519_KEY_SIZE)
-		return -EINVAL;
-
-	curve25519_arch(buf, secret, public_key);
-
-	/* might want less than we've got */
-	nbytes = min_t(size_t, CURVE25519_KEY_SIZE, req->dst_len);
-	copied = sg_copy_from_buffer(req->dst, sg_nents_for_len(req->dst,
-								nbytes),
-				     buf, nbytes);
-	if (copied != nbytes)
-		return -EINVAL;
-	return 0;
-}
-
-static unsigned int curve25519_max_size(struct crypto_kpp *tfm)
-{
-	return CURVE25519_KEY_SIZE;
-}
-
-static struct kpp_alg curve25519_alg = {
-	.base.cra_name		= "curve25519",
-	.base.cra_driver_name	= "curve25519-ppc64le",
-	.base.cra_priority	= 200,
-	.base.cra_module	= THIS_MODULE,
-	.base.cra_ctxsize	= CURVE25519_KEY_SIZE,
-
-	.set_secret		= curve25519_set_secret,
-	.generate_public_key	= curve25519_generate_public_key,
-	.compute_shared_secret	= curve25519_compute_shared_secret,
-	.max_size		= curve25519_max_size,
-};
-
-
-static int __init curve25519_mod_init(void)
-{
-	return IS_REACHABLE(CONFIG_CRYPTO_KPP) ?
-		crypto_register_kpp(&curve25519_alg) : 0;
-}
-
-static void __exit curve25519_mod_exit(void)
-{
-	if (IS_REACHABLE(CONFIG_CRYPTO_KPP))
-		crypto_unregister_kpp(&curve25519_alg);
-}
-
-module_init(curve25519_mod_init);
-module_exit(curve25519_mod_exit);
-
-MODULE_ALIAS_CRYPTO("curve25519");
-MODULE_ALIAS_CRYPTO("curve25519-ppc64le");
-MODULE_DESCRIPTION("PPC64le Curve25519 scalar multiplication with 51 bits limbs");
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Danny Tsen <dtsen@us.ibm.com>");
diff --git a/arch/powerpc/crypto/curve25519-ppc64le_asm.S b/arch/powerpc/crypto/curve25519-ppc64le_asm.S
deleted file mode 100644
index 06c1febe24b9..000000000000
--- a/arch/powerpc/crypto/curve25519-ppc64le_asm.S
+++ /dev/null
@@ -1,671 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-#
-# This code is taken from CRYPTOGAMs[1] and is included here using the option
-# in the license to distribute the code under the GPL. Therefore this program
-# is free software; you can redistribute it and/or modify it under the terms of
-# the GNU General Public License version 2 as published by the Free Software
-# Foundation.
-#
-# [1] https://github.com/dot-asm/cryptogams/
-
-# Copyright (c) 2006-2017, CRYPTOGAMS by <appro@openssl.org>
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions
-# are met:
-#
-#       * Redistributions of source code must retain copyright notices,
-#         this list of conditions and the following disclaimer.
-#
-#       * Redistributions in binary form must reproduce the above
-#         copyright notice, this list of conditions and the following
-#         disclaimer in the documentation and/or other materials
-#         provided with the distribution.
-#
-#       * Neither the name of the CRYPTOGAMS nor the names of its
-#         copyright holder and contributors may be used to endorse or
-#         promote products derived from this software without specific
-#         prior written permission.
-#
-# ALTERNATIVELY, provided that this notice is retained in full, this
-# product may be distributed under the terms of the GNU General Public
-# License (GPL), in which case the provisions of the GPL apply INSTEAD OF
-# those given above.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDER AND CONTRIBUTORS
-# "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
-# LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
-# A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
-# OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
-# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
-# THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
-# OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-# ====================================================================
-# Written by Andy Polyakov <appro@openssl.org> for the OpenSSL
-# project. The module is, however, dual licensed under OpenSSL and
-# CRYPTOGAMS licenses depending on where you obtain it. For further
-# details see https://www.openssl.org/~appro/cryptogams/.
-# ====================================================================
-
-#
-# ====================================================================
-# Written and Modified by Danny Tsen <dtsen@us.ibm.com>
-# - Added x25519_fe51_sqr_times, x25519_fe51_frombytes, x25519_fe51_tobytes
-#   and x25519_cswap
-#
-# Copyright 2024- IBM Corp.
-#
-# X25519 lower-level primitives for PPC64.
-#
-
-#include <linux/linkage.h>
-
-.text
-
-.align	5
-SYM_FUNC_START(x25519_fe51_mul)
-
-	stdu	1,-144(1)
-	std	21,56(1)
-	std	22,64(1)
-	std	23,72(1)
-	std	24,80(1)
-	std	25,88(1)
-	std	26,96(1)
-	std	27,104(1)
-	std	28,112(1)
-	std	29,120(1)
-	std	30,128(1)
-	std	31,136(1)
-
-	ld	6,0(5)
-	ld	7,0(4)
-	ld	8,8(4)
-	ld	9,16(4)
-	ld	10,24(4)
-	ld	11,32(4)
-
-	mulld	22,7,6
-	mulhdu	23,7,6
-
-	mulld	24,8,6
-	mulhdu	25,8,6
-
-	mulld	30,11,6
-	mulhdu	31,11,6
-	ld	4,8(5)
-	mulli	11,11,19
-
-	mulld	26,9,6
-	mulhdu	27,9,6
-
-	mulld	28,10,6
-	mulhdu	29,10,6
-	mulld	12,11,4
-	mulhdu	21,11,4
-	addc	22,22,12
-	adde	23,23,21
-
-	mulld	12,7,4
-	mulhdu	21,7,4
-	addc	24,24,12
-	adde	25,25,21
-
-	mulld	12,10,4
-	mulhdu	21,10,4
-	ld	6,16(5)
-	mulli	10,10,19
-	addc	30,30,12
-	adde	31,31,21
-
-	mulld	12,8,4
-	mulhdu	21,8,4
-	addc	26,26,12
-	adde	27,27,21
-
-	mulld	12,9,4
-	mulhdu	21,9,4
-	addc	28,28,12
-	adde	29,29,21
-	mulld	12,10,6
-	mulhdu	21,10,6
-	addc	22,22,12
-	adde	23,23,21
-
-	mulld	12,11,6
-	mulhdu	21,11,6
-	addc	24,24,12
-	adde	25,25,21
-
-	mulld	12,9,6
-	mulhdu	21,9,6
-	ld	4,24(5)
-	mulli	9,9,19
-	addc	30,30,12
-	adde	31,31,21
-
-	mulld	12,7,6
-	mulhdu	21,7,6
-	addc	26,26,12
-	adde	27,27,21
-
-	mulld	12,8,6
-	mulhdu	21,8,6
-	addc	28,28,12
-	adde	29,29,21
-	mulld	12,9,4
-	mulhdu	21,9,4
-	addc	22,22,12
-	adde	23,23,21
-
-	mulld	12,10,4
-	mulhdu	21,10,4
-	addc	24,24,12
-	adde	25,25,21
-
-	mulld	12,8,4
-	mulhdu	21,8,4
-	ld	6,32(5)
-	mulli	8,8,19
-	addc	30,30,12
-	adde	31,31,21
-
-	mulld	12,11,4
-	mulhdu	21,11,4
-	addc	26,26,12
-	adde	27,27,21
-
-	mulld	12,7,4
-	mulhdu	21,7,4
-	addc	28,28,12
-	adde	29,29,21
-	mulld	12,8,6
-	mulhdu	21,8,6
-	addc	22,22,12
-	adde	23,23,21
-
-	mulld	12,9,6
-	mulhdu	21,9,6
-	addc	24,24,12
-	adde	25,25,21
-
-	mulld	12,10,6
-	mulhdu	21,10,6
-	addc	26,26,12
-	adde	27,27,21
-
-	mulld	12,11,6
-	mulhdu	21,11,6
-	addc	28,28,12
-	adde	29,29,21
-
-	mulld	12,7,6
-	mulhdu	21,7,6
-	addc	30,30,12
-	adde	31,31,21
-
-.Lfe51_reduce:
-	li	0,-1
-	srdi	0,0,13
-
-	srdi	12,26,51
-	and	9,26,0
-	insrdi	12,27,51,0
-	srdi	21,22,51
-	and	7,22,0
-	insrdi	21,23,51,0
-	addc	28,28,12
-	addze	29,29
-	addc	24,24,21
-	addze	25,25
-
-	srdi	12,28,51
-	and	10,28,0
-	insrdi	12,29,51,0
-	srdi	21,24,51
-	and	8,24,0
-	insrdi	21,25,51,0
-	addc	30,30,12
-	addze	31,31
-	add	9,9,21
-
-	srdi	12,30,51
-	and	11,30,0
-	insrdi	12,31,51,0
-	mulli	12,12,19
-
-	add	7,7,12
-
-	srdi	21,9,51
-	and	9,9,0
-	add	10,10,21
-
-	srdi	12,7,51
-	and	7,7,0
-	add	8,8,12
-
-	std	9,16(3)
-	std	10,24(3)
-	std	11,32(3)
-	std	7,0(3)
-	std	8,8(3)
-
-	ld	21,56(1)
-	ld	22,64(1)
-	ld	23,72(1)
-	ld	24,80(1)
-	ld	25,88(1)
-	ld	26,96(1)
-	ld	27,104(1)
-	ld	28,112(1)
-	ld	29,120(1)
-	ld	30,128(1)
-	ld	31,136(1)
-	addi	1,1,144
-	blr
-SYM_FUNC_END(x25519_fe51_mul)
-
-.align	5
-SYM_FUNC_START(x25519_fe51_sqr)
-
-	stdu	1,-144(1)
-	std	21,56(1)
-	std	22,64(1)
-	std	23,72(1)
-	std	24,80(1)
-	std	25,88(1)
-	std	26,96(1)
-	std	27,104(1)
-	std	28,112(1)
-	std	29,120(1)
-	std	30,128(1)
-	std	31,136(1)
-
-	ld	7,0(4)
-	ld	8,8(4)
-	ld	9,16(4)
-	ld	10,24(4)
-	ld	11,32(4)
-
-	add	6,7,7
-	mulli	21,11,19
-
-	mulld	22,7,7
-	mulhdu	23,7,7
-	mulld	24,8,6
-	mulhdu	25,8,6
-	mulld	26,9,6
-	mulhdu	27,9,6
-	mulld	28,10,6
-	mulhdu	29,10,6
-	mulld	30,11,6
-	mulhdu	31,11,6
-	add	6,8,8
-	mulld	12,11,21
-	mulhdu	11,11,21
-	addc	28,28,12
-	adde	29,29,11
-
-	mulli	5,10,19
-
-	mulld	12,8,8
-	mulhdu	11,8,8
-	addc	26,26,12
-	adde	27,27,11
-	mulld	12,9,6
-	mulhdu	11,9,6
-	addc	28,28,12
-	adde	29,29,11
-	mulld	12,10,6
-	mulhdu	11,10,6
-	addc	30,30,12
-	adde	31,31,11
-	mulld	12,21,6
-	mulhdu	11,21,6
-	add	6,10,10
-	addc	22,22,12
-	adde	23,23,11
-	mulld	12,10,5
-	mulhdu	10,10,5
-	addc	24,24,12
-	adde	25,25,10
-	mulld	12,6,21
-	mulhdu	10,6,21
-	add	6,9,9
-	addc	26,26,12
-	adde	27,27,10
-
-	mulld	12,9,9
-	mulhdu	10,9,9
-	addc	30,30,12
-	adde	31,31,10
-	mulld	12,5,6
-	mulhdu	10,5,6
-	addc	22,22,12
-	adde	23,23,10
-	mulld	12,21,6
-	mulhdu	10,21,6
-	addc	24,24,12
-	adde	25,25,10
-
-	b	.Lfe51_reduce
-SYM_FUNC_END(x25519_fe51_sqr)
-
-.align	5
-SYM_FUNC_START(x25519_fe51_mul121666)
-
-	stdu	1,-144(1)
-	std	21,56(1)
-	std	22,64(1)
-	std	23,72(1)
-	std	24,80(1)
-	std	25,88(1)
-	std	26,96(1)
-	std	27,104(1)
-	std	28,112(1)
-	std	29,120(1)
-	std	30,128(1)
-	std	31,136(1)
-
-	lis	6,1
-	ori	6,6,56130
-	ld	7,0(4)
-	ld	8,8(4)
-	ld	9,16(4)
-	ld	10,24(4)
-	ld	11,32(4)
-
-	mulld	22,7,6
-	mulhdu	23,7,6
-	mulld	24,8,6
-	mulhdu	25,8,6
-	mulld	26,9,6
-	mulhdu	27,9,6
-	mulld	28,10,6
-	mulhdu	29,10,6
-	mulld	30,11,6
-	mulhdu	31,11,6
-
-	b	.Lfe51_reduce
-SYM_FUNC_END(x25519_fe51_mul121666)
-
-.align	5
-SYM_FUNC_START(x25519_fe51_sqr_times)
-
-	stdu	1,-144(1)
-	std	21,56(1)
-	std	22,64(1)
-	std	23,72(1)
-	std	24,80(1)
-	std	25,88(1)
-	std	26,96(1)
-	std	27,104(1)
-	std	28,112(1)
-	std	29,120(1)
-	std	30,128(1)
-	std	31,136(1)
-
-	ld	7,0(4)
-	ld	8,8(4)
-	ld	9,16(4)
-	ld	10,24(4)
-	ld	11,32(4)
-
-	mtctr	5
-
-.Lsqr_times_loop:
-	add	6,7,7
-	mulli	21,11,19
-
-	mulld	22,7,7
-	mulhdu	23,7,7
-	mulld	24,8,6
-	mulhdu	25,8,6
-	mulld	26,9,6
-	mulhdu	27,9,6
-	mulld	28,10,6
-	mulhdu	29,10,6
-	mulld	30,11,6
-	mulhdu	31,11,6
-	add	6,8,8
-	mulld	12,11,21
-	mulhdu	11,11,21
-	addc	28,28,12
-	adde	29,29,11
-
-	mulli	5,10,19
-
-	mulld	12,8,8
-	mulhdu	11,8,8
-	addc	26,26,12
-	adde	27,27,11
-	mulld	12,9,6
-	mulhdu	11,9,6
-	addc	28,28,12
-	adde	29,29,11
-	mulld	12,10,6
-	mulhdu	11,10,6
-	addc	30,30,12
-	adde	31,31,11
-	mulld	12,21,6
-	mulhdu	11,21,6
-	add	6,10,10
-	addc	22,22,12
-	adde	23,23,11
-	mulld	12,10,5
-	mulhdu	10,10,5
-	addc	24,24,12
-	adde	25,25,10
-	mulld	12,6,21
-	mulhdu	10,6,21
-	add	6,9,9
-	addc	26,26,12
-	adde	27,27,10
-
-	mulld	12,9,9
-	mulhdu	10,9,9
-	addc	30,30,12
-	adde	31,31,10
-	mulld	12,5,6
-	mulhdu	10,5,6
-	addc	22,22,12
-	adde	23,23,10
-	mulld	12,21,6
-	mulhdu	10,21,6
-	addc	24,24,12
-	adde	25,25,10
-
-	# fe51_reduce
-	li	0,-1
-	srdi	0,0,13
-
-	srdi	12,26,51
-	and	9,26,0
-	insrdi	12,27,51,0
-	srdi	21,22,51
-	and	7,22,0
-	insrdi	21,23,51,0
-	addc	28,28,12
-	addze	29,29
-	addc	24,24,21
-	addze	25,25
-
-	srdi	12,28,51
-	and	10,28,0
-	insrdi	12,29,51,0
-	srdi	21,24,51
-	and	8,24,0
-	insrdi	21,25,51,0
-	addc	30,30,12
-	addze	31,31
-	add	9,9,21
-
-	srdi	12,30,51
-	and	11,30,0
-	insrdi	12,31,51,0
-	mulli	12,12,19
-
-	add	7,7,12
-
-	srdi	21,9,51
-	and	9,9,0
-	add	10,10,21
-
-	srdi	12,7,51
-	and	7,7,0
-	add	8,8,12
-
-	bdnz	.Lsqr_times_loop
-
-	std	9,16(3)
-	std	10,24(3)
-	std	11,32(3)
-	std	7,0(3)
-	std	8,8(3)
-
-	ld	21,56(1)
-	ld	22,64(1)
-	ld	23,72(1)
-	ld	24,80(1)
-	ld	25,88(1)
-	ld	26,96(1)
-	ld	27,104(1)
-	ld	28,112(1)
-	ld	29,120(1)
-	ld	30,128(1)
-	ld	31,136(1)
-	addi	1,1,144
-	blr
-SYM_FUNC_END(x25519_fe51_sqr_times)
-
-.align	5
-SYM_FUNC_START(x25519_fe51_frombytes)
-
-	li	12, -1
-	srdi	12, 12, 13	# 0x7ffffffffffff
-
-	ld	5, 0(4)
-	ld	6, 8(4)
-	ld	7, 16(4)
-	ld	8, 24(4)
-
-	srdi	10, 5, 51
-	and	5, 5, 12	# h0
-
-	sldi	11, 6, 13
-	or	11, 10, 11	# h1t
-	srdi	10, 6, 38
-	and	6, 11, 12	# h1
-
-	sldi	11, 7, 26
-	or	10, 10, 11	# h2t
-
-	srdi	11, 7, 25
-	and	7, 10, 12	# h2
-	sldi	10, 8, 39
-	or	11, 11, 10	# h3t
-
-	srdi	9, 8, 12
-	and	8, 11, 12	# h3
-	and	9, 9, 12	# h4
-
-	std	5, 0(3)
-	std	6, 8(3)
-	std	7, 16(3)
-	std	8, 24(3)
-	std	9, 32(3)
-
-	blr
-SYM_FUNC_END(x25519_fe51_frombytes)
-
-.align	5
-SYM_FUNC_START(x25519_fe51_tobytes)
-
-	ld	5, 0(4)
-	ld	6, 8(4)
-	ld	7, 16(4)
-	ld	8, 24(4)
-	ld	9, 32(4)
-
-	li	12, -1
-	srdi	12, 12, 13	# 0x7ffffffffffff
-
-	# Full reducuction
-	addi	10, 5, 19
-	srdi	10, 10, 51
-	add	10, 10, 6
-	srdi	10, 10, 51
-	add	10, 10, 7
-	srdi	10, 10, 51
-	add	10, 10, 8
-	srdi	10, 10, 51
-	add	10, 10, 9
-	srdi	10, 10, 51
-
-	mulli	10, 10, 19
-	add	5, 5, 10
-	srdi	11, 5, 51
-	add	6, 6, 11
-	srdi	11, 6, 51
-	add	7, 7, 11
-	srdi	11, 7, 51
-	add	8, 8, 11
-	srdi	11, 8, 51
-	add	9, 9, 11
-
-	and	5, 5, 12
-	and	6, 6, 12
-	and	7, 7, 12
-	and	8, 8, 12
-	and	9, 9, 12
-
-	sldi	10, 6, 51
-	or	5, 5, 10	# s0
-
-	srdi	11, 6, 13
-	sldi	10, 7, 38
-	or	6, 11, 10	# s1
-
-	srdi	11, 7, 26
-	sldi	10, 8, 25
-	or	7, 11, 10	# s2
-
-	srdi	11, 8, 39
-	sldi	10, 9, 12
-	or	8, 11, 10	# s4
-
-	std	5, 0(3)
-	std	6, 8(3)
-	std	7, 16(3)
-	std	8, 24(3)
-
-	blr
-SYM_FUNC_END(x25519_fe51_tobytes)
-
-.align	5
-SYM_FUNC_START(x25519_cswap)
-
-	li	7, 5
-	neg	6, 5
-	mtctr	7
-
-.Lswap_loop:
-	ld	8, 0(3)
-	ld	9, 0(4)
-	xor	10, 8, 9
-	and	10, 10, 6
-	xor	11, 8, 10
-	xor	12, 9, 10
-	std	11, 0(3)
-	addi	3, 3, 8
-	std	12, 0(4)
-	addi	4, 4, 8
-	bdnz	.Lswap_loop
-
-	blr
-SYM_FUNC_END(x25519_cswap)
diff --git a/arch/powerpc/crypto/md5-asm.S b/arch/powerpc/crypto/md5-asm.S
deleted file mode 100644
index fa6bc440cf4a..000000000000
--- a/arch/powerpc/crypto/md5-asm.S
+++ /dev/null
@@ -1,235 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * Fast MD5 implementation for PPC
- *
- * Copyright (c) 2015 Markus Stockhausen <stockhausen@collogia.de>
- */
-#include <asm/ppc_asm.h>
-#include <asm/asm-offsets.h>
-#include <asm/asm-compat.h>
-
-#define rHP	r3
-#define rWP	r4
-
-#define rH0	r0
-#define rH1	r6
-#define rH2	r7
-#define rH3	r5
-
-#define rW00	r8
-#define rW01	r9
-#define rW02	r10
-#define rW03	r11
-#define rW04	r12
-#define rW05	r14
-#define rW06	r15
-#define rW07	r16
-#define rW08	r17
-#define rW09	r18
-#define rW10	r19
-#define rW11	r20
-#define rW12	r21
-#define rW13	r22
-#define rW14	r23
-#define rW15	r24
-
-#define rT0	r25
-#define rT1	r26
-
-#define INITIALIZE \
-	PPC_STLU r1,-INT_FRAME_SIZE(r1); \
-	SAVE_GPRS(14, 26, r1)		/* push registers onto stack	*/
-
-#define FINALIZE \
-	REST_GPRS(14, 26, r1);		/* pop registers from stack	*/ \
-	addi	r1,r1,INT_FRAME_SIZE
-
-#ifdef __BIG_ENDIAN__
-#define LOAD_DATA(reg, off) \
-	lwbrx		reg,0,rWP;	/* load data			*/
-#define INC_PTR \
-	addi		rWP,rWP,4;	/* increment per word		*/
-#define NEXT_BLOCK			/* nothing to do		*/
-#else
-#define LOAD_DATA(reg, off) \
-	lwz		reg,off(rWP);	/* load data			*/
-#define INC_PTR				/* nothing to do		*/
-#define NEXT_BLOCK \
-	addi		rWP,rWP,64;	/* increment per block		*/
-#endif
-
-#define R_00_15(a, b, c, d, w0, w1, p, q, off, k0h, k0l, k1h, k1l) \
-	LOAD_DATA(w0, off)		/*    W				*/ \
-	and		rT0,b,c;	/* 1: f = b and c		*/ \
-	INC_PTR				/*    ptr++			*/ \
-	andc		rT1,d,b;	/* 1: f' = ~b and d		*/ \
-	LOAD_DATA(w1, off+4)		/*    W				*/ \
-	or		rT0,rT0,rT1;	/* 1: f = f or f'		*/ \
-	addi		w0,w0,k0l;	/* 1: wk = w + k		*/ \
-	add		a,a,rT0;	/* 1: a = a + f			*/ \
-	addis		w0,w0,k0h;	/* 1: wk = w + k'		*/ \
-	addis		w1,w1,k1h;	/* 2: wk = w + k		*/ \
-	add		a,a,w0;		/* 1: a = a + wk		*/ \
-	addi		w1,w1,k1l;	/* 2: wk = w + k'		*/ \
-	rotrwi		a,a,p;		/* 1: a = a rotl x		*/ \
-	add		d,d,w1;		/* 2: a = a + wk		*/ \
-	add		a,a,b;		/* 1: a = a + b			*/ \
-	and		rT0,a,b;	/* 2: f = b and c		*/ \
-	andc		rT1,c,a;	/* 2: f' = ~b and d		*/ \
-	or		rT0,rT0,rT1;	/* 2: f = f or f'		*/ \
-	add		d,d,rT0;	/* 2: a = a + f			*/ \
-	INC_PTR				/*    ptr++			*/ \
-	rotrwi		d,d,q;		/* 2: a = a rotl x		*/ \
-	add		d,d,a;		/* 2: a = a + b			*/
-
-#define R_16_31(a, b, c, d, w0, w1, p, q, k0h, k0l, k1h, k1l) \
-	andc		rT0,c,d;	/* 1: f = c and ~d		*/ \
-	and		rT1,b,d;	/* 1: f' = b and d		*/ \
-	addi		w0,w0,k0l;	/* 1: wk = w + k		*/ \
-	or		rT0,rT0,rT1;	/* 1: f = f or f'		*/ \
-	addis		w0,w0,k0h;	/* 1: wk = w + k'		*/ \
-	add		a,a,rT0;	/* 1: a = a + f			*/ \
-	addi		w1,w1,k1l;	/* 2: wk = w + k		*/ \
-	add		a,a,w0;		/* 1: a = a + wk		*/ \
-	addis		w1,w1,k1h;	/* 2: wk = w + k'		*/ \
-	andc		rT0,b,c;	/* 2: f = c and ~d		*/ \
-	rotrwi		a,a,p;		/* 1: a = a rotl x		*/ \
-	add		a,a,b;		/* 1: a = a + b			*/ \
-	add		d,d,w1;		/* 2: a = a + wk		*/ \
-	and		rT1,a,c;	/* 2: f' = b and d		*/ \
-	or		rT0,rT0,rT1;	/* 2: f = f or f'		*/ \
-	add		d,d,rT0;	/* 2: a = a + f			*/ \
-	rotrwi		d,d,q;		/* 2: a = a rotl x		*/ \
-	add		d,d,a;		/* 2: a = a +b			*/
-
-#define R_32_47(a, b, c, d, w0, w1, p, q, k0h, k0l, k1h, k1l) \
-	xor		rT0,b,c;	/* 1: f' = b xor c		*/ \
-	addi		w0,w0,k0l;	/* 1: wk = w + k		*/ \
-	xor		rT1,rT0,d;	/* 1: f = f xor f'		*/ \
-	addis		w0,w0,k0h;	/* 1: wk = w + k'		*/ \
-	add		a,a,rT1;	/* 1: a = a + f			*/ \
-	addi		w1,w1,k1l;	/* 2: wk = w + k		*/ \
-	add		a,a,w0;		/* 1: a = a + wk		*/ \
-	addis		w1,w1,k1h;	/* 2: wk = w + k'		*/ \
-	rotrwi		a,a,p;		/* 1: a = a rotl x		*/ \
-	add		d,d,w1;		/* 2: a = a + wk		*/ \
-	add		a,a,b;		/* 1: a = a + b			*/ \
-	xor		rT1,rT0,a;	/* 2: f = b xor f'		*/ \
-	add		d,d,rT1;	/* 2: a = a + f			*/ \
-	rotrwi		d,d,q;		/* 2: a = a rotl x		*/ \
-	add		d,d,a;		/* 2: a = a + b			*/
-
-#define R_48_63(a, b, c, d, w0, w1, p, q, k0h, k0l, k1h, k1l) \
-	addi		w0,w0,k0l;	/* 1: w = w + k			*/ \
-	orc		rT0,b,d;	/* 1: f = b or ~d		*/ \
-	addis		w0,w0,k0h;	/* 1: w = w + k'		*/ \
-	xor		rT0,rT0,c;	/* 1: f = f xor c		*/ \
-	add		a,a,w0;		/* 1: a = a + wk		*/ \
-	addi		w1,w1,k1l;	/* 2: w = w + k			*/ \
-	add		a,a,rT0;	/* 1: a = a + f			*/ \
-	addis		w1,w1,k1h;	/* 2: w = w + k'		*/ \
-	rotrwi		a,a,p;		/* 1: a = a rotl x		*/ \
-	add		a,a,b;		/* 1: a = a + b			*/ \
-	orc		rT0,a,c;	/* 2: f = b or ~d		*/ \
-	add		d,d,w1;		/* 2: a = a + wk		*/ \
-	xor		rT0,rT0,b;	/* 2: f = f xor c		*/ \
-	add		d,d,rT0;	/* 2: a = a + f			*/ \
-	rotrwi		d,d,q;		/* 2: a = a rotl x		*/ \
-	add		d,d,a;		/* 2: a = a + b			*/
-
-_GLOBAL(ppc_md5_transform)
-	INITIALIZE
-
-	mtctr		r5
-	lwz		rH0,0(rHP)
-	lwz		rH1,4(rHP)
-	lwz		rH2,8(rHP)
-	lwz		rH3,12(rHP)
-
-ppc_md5_main:
-	R_00_15(rH0, rH1, rH2, rH3, rW00, rW01, 25, 20, 0,
-		0xd76b, -23432, 0xe8c8, -18602)
-	R_00_15(rH2, rH3, rH0, rH1, rW02, rW03, 15, 10, 8,
-		0x2420, 0x70db, 0xc1be, -12562)
-	R_00_15(rH0, rH1, rH2, rH3, rW04, rW05, 25, 20, 16,
-		0xf57c, 0x0faf, 0x4788, -14806)
-	R_00_15(rH2, rH3, rH0, rH1, rW06, rW07, 15, 10, 24,
-		0xa830, 0x4613, 0xfd47, -27391)
-	R_00_15(rH0, rH1, rH2, rH3, rW08, rW09, 25, 20, 32,
-		0x6981, -26408, 0x8b45,  -2129)
-	R_00_15(rH2, rH3, rH0, rH1, rW10, rW11, 15, 10, 40,
-		0xffff, 0x5bb1, 0x895d, -10306)
-	R_00_15(rH0, rH1, rH2, rH3, rW12, rW13, 25, 20, 48,
-		0x6b90, 0x1122, 0xfd98, 0x7193)
-	R_00_15(rH2, rH3, rH0, rH1, rW14, rW15, 15, 10, 56,
-		0xa679, 0x438e, 0x49b4, 0x0821)
-
-	R_16_31(rH0, rH1, rH2, rH3, rW01, rW06, 27, 23,
-		0x0d56, 0x6e0c, 0x1810, 0x6d2d)
-	R_16_31(rH2, rH3, rH0, rH1, rW11, rW00, 18, 12,
-		0x9d02, -32109, 0x124c, 0x2332)
-	R_16_31(rH0, rH1, rH2, rH3, rW05, rW10, 27, 23,
-		0x8ea7, 0x4a33, 0x0245, -18270)
-	R_16_31(rH2, rH3, rH0, rH1, rW15, rW04, 18, 12,
-		0x8eee,  -8608, 0xf258,  -5095)
-	R_16_31(rH0, rH1, rH2, rH3, rW09, rW14, 27, 23,
-		0x969d, -10697, 0x1cbe, -15288)
-	R_16_31(rH2, rH3, rH0, rH1, rW03, rW08, 18, 12,
-		0x3317, 0x3e99, 0xdbd9, 0x7c15)
-	R_16_31(rH0, rH1, rH2, rH3, rW13, rW02, 27, 23,
-		0xac4b, 0x7772, 0xd8cf, 0x331d)
-	R_16_31(rH2, rH3, rH0, rH1, rW07, rW12, 18, 12,
-		0x6a28, 0x6dd8, 0x219a, 0x3b68)
-
-	R_32_47(rH0, rH1, rH2, rH3, rW05, rW08, 28, 21,
-		0x29cb, 0x28e5, 0x4218,  -7788)
-	R_32_47(rH2, rH3, rH0, rH1, rW11, rW14, 16,  9,
-		0x473f, 0x06d1, 0x3aae, 0x3036)
-	R_32_47(rH0, rH1, rH2, rH3, rW01, rW04, 28, 21,
-		0xaea1, -15134, 0x640b, -11295)
-	R_32_47(rH2, rH3, rH0, rH1, rW07, rW10, 16,  9,
-		0x8f4c, 0x4887, 0xbc7c, -22499)
-	R_32_47(rH0, rH1, rH2, rH3, rW13, rW00, 28, 21,
-		0x7eb8, -27199, 0x00ea, 0x6050)
-	R_32_47(rH2, rH3, rH0, rH1, rW03, rW06, 16,  9,
-		0xe01a, 0x22fe, 0x4447, 0x69c5)
-	R_32_47(rH0, rH1, rH2, rH3, rW09, rW12, 28, 21,
-		0xb7f3, 0x0253, 0x59b1, 0x4d5b)
-	R_32_47(rH2, rH3, rH0, rH1, rW15, rW02, 16,  9,
-		0x4701, -27017, 0xc7bd, -19859)
-
-	R_48_63(rH0, rH1, rH2, rH3, rW00, rW07, 26, 22,
-		0x0988,  -1462, 0x4c70, -19401)
-	R_48_63(rH2, rH3, rH0, rH1, rW14, rW05, 17, 11,
-		0xadaf,  -5221, 0xfc99, 0x66f7)
-	R_48_63(rH0, rH1, rH2, rH3, rW12, rW03, 26, 22,
-		0x7e80, -16418, 0xba1e, -25587)
-	R_48_63(rH2, rH3, rH0, rH1, rW10, rW01, 17, 11,
-		0x4130, 0x380d, 0xe0c5, 0x738d)
-	lwz		rW00,0(rHP)
-	R_48_63(rH0, rH1, rH2, rH3, rW08, rW15, 26, 22,
-		0xe837, -30770, 0xde8a, 0x69e8)
-	lwz		rW14,4(rHP)
-	R_48_63(rH2, rH3, rH0, rH1, rW06, rW13, 17, 11,
-		0x9e79, 0x260f, 0x256d, -27941)
-	lwz		rW12,8(rHP)
-	R_48_63(rH0, rH1, rH2, rH3, rW04, rW11, 26, 22,
-		0xab75, -20775, 0x4f9e, -28397)
-	lwz		rW10,12(rHP)
-	R_48_63(rH2, rH3, rH0, rH1, rW02, rW09, 17, 11,
-		0x662b, 0x7c56, 0x11b2, 0x0358)
-
-	add		rH0,rH0,rW00
-	stw		rH0,0(rHP)
-	add		rH1,rH1,rW14
-	stw		rH1,4(rHP)
-	add		rH2,rH2,rW12
-	stw		rH2,8(rHP)
-	add		rH3,rH3,rW10
-	stw		rH3,12(rHP)
-	NEXT_BLOCK
-
-	bdnz		ppc_md5_main
-
-	FINALIZE
-	blr
diff --git a/arch/powerpc/crypto/md5-glue.c b/arch/powerpc/crypto/md5-glue.c
deleted file mode 100644
index 204440a90cd8..000000000000
--- a/arch/powerpc/crypto/md5-glue.c
+++ /dev/null
@@ -1,99 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- * Glue code for MD5 implementation for PPC assembler
- *
- * Based on generic implementation.
- *
- * Copyright (c) 2015 Markus Stockhausen <stockhausen@collogia.de>
- */
-
-#include <crypto/internal/hash.h>
-#include <crypto/md5.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-
-extern void ppc_md5_transform(u32 *state, const u8 *src, u32 blocks);
-
-static int ppc_md5_init(struct shash_desc *desc)
-{
-	struct md5_state *sctx = shash_desc_ctx(desc);
-
-	sctx->hash[0] = MD5_H0;
-	sctx->hash[1] = MD5_H1;
-	sctx->hash[2] = MD5_H2;
-	sctx->hash[3] =	MD5_H3;
-	sctx->byte_count = 0;
-
-	return 0;
-}
-
-static int ppc_md5_update(struct shash_desc *desc, const u8 *data,
-			unsigned int len)
-{
-	struct md5_state *sctx = shash_desc_ctx(desc);
-
-	sctx->byte_count += round_down(len, MD5_HMAC_BLOCK_SIZE);
-	ppc_md5_transform(sctx->hash, data, len >> 6);
-	return len - round_down(len, MD5_HMAC_BLOCK_SIZE);
-}
-
-static int ppc_md5_finup(struct shash_desc *desc, const u8 *src,
-			 unsigned int offset, u8 *out)
-{
-	struct md5_state *sctx = shash_desc_ctx(desc);
-	__le64 block[MD5_BLOCK_WORDS] = {};
-	u8 *p = memcpy(block, src, offset);
-	__le32 *dst = (__le32 *)out;
-	__le64 *pbits;
-
-	src = p;
-	p += offset;
-	*p++ = 0x80;
-	sctx->byte_count += offset;
-	pbits = &block[(MD5_BLOCK_WORDS / (offset > 55 ? 1 : 2)) - 1];
-	*pbits = cpu_to_le64(sctx->byte_count << 3);
-	ppc_md5_transform(sctx->hash, src, (pbits - block + 1) / 8);
-	memzero_explicit(block, sizeof(block));
-
-	dst[0] = cpu_to_le32(sctx->hash[0]);
-	dst[1] = cpu_to_le32(sctx->hash[1]);
-	dst[2] = cpu_to_le32(sctx->hash[2]);
-	dst[3] = cpu_to_le32(sctx->hash[3]);
-	return 0;
-}
-
-static struct shash_alg alg = {
-	.digestsize	=	MD5_DIGEST_SIZE,
-	.init		=	ppc_md5_init,
-	.update		=	ppc_md5_update,
-	.finup		=	ppc_md5_finup,
-	.descsize	=	MD5_STATE_SIZE,
-	.base		=	{
-		.cra_name	=	"md5",
-		.cra_driver_name=	"md5-ppc",
-		.cra_priority	=	200,
-		.cra_flags	=	CRYPTO_AHASH_ALG_BLOCK_ONLY,
-		.cra_blocksize	=	MD5_HMAC_BLOCK_SIZE,
-		.cra_module	=	THIS_MODULE,
-	}
-};
-
-static int __init ppc_md5_mod_init(void)
-{
-	return crypto_register_shash(&alg);
-}
-
-static void __exit ppc_md5_mod_fini(void)
-{
-	crypto_unregister_shash(&alg);
-}
-
-module_init(ppc_md5_mod_init);
-module_exit(ppc_md5_mod_fini);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("MD5 Secure Hash Algorithm, PPC assembler");
-
-MODULE_ALIAS_CRYPTO("md5");
-MODULE_ALIAS_CRYPTO("md5-ppc");
diff --git a/arch/powerpc/include/asm/asm-const.h b/arch/powerpc/include/asm/asm-const.h
index bfb3c3534877..392bdb1f104f 100644
--- a/arch/powerpc/include/asm/asm-const.h
+++ b/arch/powerpc/include/asm/asm-const.h
@@ -1,7 +1,7 @@
 #ifndef _ASM_POWERPC_ASM_CONST_H
 #define _ASM_POWERPC_ASM_CONST_H
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #  define stringify_in_c(...)	__VA_ARGS__
 #  define ASM_CONST(x)		x
 #else
diff --git a/arch/powerpc/include/asm/barrier.h b/arch/powerpc/include/asm/barrier.h
index b95b666f0374..9e9833faa4af 100644
--- a/arch/powerpc/include/asm/barrier.h
+++ b/arch/powerpc/include/asm/barrier.h
@@ -7,7 +7,7 @@
 
 #include <asm/asm-const.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <asm/ppc-opcode.h>
 #endif
 
diff --git a/arch/powerpc/include/asm/bitops.h b/arch/powerpc/include/asm/bitops.h
index 671ecc6711e3..0d0470cd5ac3 100644
--- a/arch/powerpc/include/asm/bitops.h
+++ b/arch/powerpc/include/asm/bitops.h
@@ -276,7 +276,7 @@ static inline void arch___clear_bit_unlock(int nr, volatile unsigned long *addr)
  * fls: find last (most-significant) bit set.
  * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
  */
-static __always_inline int fls(unsigned int x)
+static __always_inline __attribute_const__ int fls(unsigned int x)
 {
 	int lz;
 
@@ -294,7 +294,7 @@ static __always_inline int fls(unsigned int x)
  * 32-bit fls calls.
  */
 #ifdef CONFIG_PPC64
-static __always_inline int fls64(__u64 x)
+static __always_inline __attribute_const__ int fls64(__u64 x)
 {
 	int lz;
 
diff --git a/arch/powerpc/include/asm/book3s/32/kup.h b/arch/powerpc/include/asm/book3s/32/kup.h
index 4e14a5427a63..873c5146e326 100644
--- a/arch/powerpc/include/asm/book3s/32/kup.h
+++ b/arch/powerpc/include/asm/book3s/32/kup.h
@@ -7,7 +7,7 @@
 #include <asm/mmu.h>
 #include <asm/synch.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #ifdef CONFIG_PPC_KUAP
 
@@ -170,6 +170,6 @@ __bad_kuap_fault(struct pt_regs *regs, unsigned long address, bool is_write)
 
 #endif /* CONFIG_PPC_KUAP */
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_POWERPC_BOOK3S_32_KUP_H */
diff --git a/arch/powerpc/include/asm/book3s/32/mmu-hash.h b/arch/powerpc/include/asm/book3s/32/mmu-hash.h
index 78c6a5fde1d6..8435bf3cdabf 100644
--- a/arch/powerpc/include/asm/book3s/32/mmu-hash.h
+++ b/arch/powerpc/include/asm/book3s/32/mmu-hash.h
@@ -29,7 +29,7 @@
 #define BPP_RX	0x01		/* Read only */
 #define BPP_RW	0x02		/* Read/write */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 /* Contort a phys_addr_t into the right format/bits for a BAT */
 #ifdef CONFIG_PHYS_64BIT
 #define BAT_PHYS_ADDR(x) ((u32)((x & 0x00000000fffe0000ULL) | \
@@ -47,7 +47,7 @@ struct ppc_bat {
 	u32 batu;
 	u32 batl;
 };
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 /*
  * Hash table
@@ -64,7 +64,7 @@ struct ppc_bat {
 #define SR_KP	0x20000000	/* User key */
 #define SR_KS	0x40000000	/* Supervisor key */
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 #include <asm/asm-offsets.h>
 
@@ -225,7 +225,7 @@ static __always_inline void update_user_segments(u32 val)
 
 int __init find_free_bat(void);
 unsigned int bat_block_size(unsigned long base, unsigned long top);
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 /* We happily ignore the smaller BATs on 601, we don't actually use
  * those definitions on hash32 at the moment anyway
diff --git a/arch/powerpc/include/asm/book3s/32/pgalloc.h b/arch/powerpc/include/asm/book3s/32/pgalloc.h
index dd4eb3063175..f4390704d5ba 100644
--- a/arch/powerpc/include/asm/book3s/32/pgalloc.h
+++ b/arch/powerpc/include/asm/book3s/32/pgalloc.h
@@ -7,8 +7,14 @@
 
 static inline pgd_t *pgd_alloc(struct mm_struct *mm)
 {
-	return kmem_cache_alloc(PGT_CACHE(PGD_INDEX_SIZE),
-			pgtable_gfp_flags(mm, GFP_KERNEL));
+	pgd_t *pgd = kmem_cache_alloc(PGT_CACHE(PGD_INDEX_SIZE),
+				      pgtable_gfp_flags(mm, GFP_KERNEL));
+
+#ifdef CONFIG_PPC_BOOK3S_603
+	memcpy(pgd + USER_PTRS_PER_PGD, swapper_pg_dir + USER_PTRS_PER_PGD,
+	       (MAX_PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
+#endif
+	return pgd;
 }
 
 static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
diff --git a/arch/powerpc/include/asm/book3s/32/pgtable.h b/arch/powerpc/include/asm/book3s/32/pgtable.h
index 92d21c6faf1e..87dcca962be7 100644
--- a/arch/powerpc/include/asm/book3s/32/pgtable.h
+++ b/arch/powerpc/include/asm/book3s/32/pgtable.h
@@ -102,7 +102,7 @@
 #define PMD_CACHE_INDEX	PMD_INDEX_SIZE
 #define PUD_CACHE_INDEX	PUD_INDEX_SIZE
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #define PTE_TABLE_SIZE	(sizeof(pte_t) << PTE_INDEX_SIZE)
 #define PMD_TABLE_SIZE	0
 #define PUD_TABLE_SIZE	0
@@ -110,7 +110,7 @@
 
 /* Bits to mask out from a PMD to get to the PTE page */
 #define PMD_MASKED_BITS		(PTE_TABLE_SIZE - 1)
-#endif	/* __ASSEMBLY__ */
+#endif	/* __ASSEMBLER__ */
 
 #define PTRS_PER_PTE	(1 << PTE_INDEX_SIZE)
 #define PTRS_PER_PGD	(1 << PGD_INDEX_SIZE)
@@ -132,12 +132,12 @@
 
 #define USER_PTRS_PER_PGD	(TASK_SIZE / PGDIR_SIZE)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 int map_kernel_page(unsigned long va, phys_addr_t pa, pgprot_t prot);
 void unmap_kernel_page(unsigned long va);
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 /*
  * This is the bottom of the PKMAP area with HIGHMEM or an arbitrary
@@ -199,7 +199,7 @@ void unmap_kernel_page(unsigned long va);
 #define MODULES_SIZE	(CONFIG_MODULES_SIZE * SZ_1M)
 #define MODULES_VADDR	(MODULES_END - MODULES_SIZE)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <linux/sched.h>
 #include <linux/threads.h>
 
@@ -602,6 +602,6 @@ static inline pgprot_t pgprot_writecombine(pgprot_t prot)
 	return pgprot_noncached_wc(prot);
 }
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /*  _ASM_POWERPC_BOOK3S_32_PGTABLE_H */
diff --git a/arch/powerpc/include/asm/book3s/64/hash-4k.h b/arch/powerpc/include/asm/book3s/64/hash-4k.h
index 7132392fa7cd..8e5bd9902bed 100644
--- a/arch/powerpc/include/asm/book3s/64/hash-4k.h
+++ b/arch/powerpc/include/asm/book3s/64/hash-4k.h
@@ -32,7 +32,7 @@
  */
 #define H_KERN_VIRT_START	ASM_CONST(0xc0003d0000000000)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #define H_PTE_TABLE_SIZE	(sizeof(pte_t) << H_PTE_INDEX_SIZE)
 #define H_PMD_TABLE_SIZE	(sizeof(pmd_t) << H_PMD_INDEX_SIZE)
 #define H_PUD_TABLE_SIZE	(sizeof(pud_t) << H_PUD_INDEX_SIZE)
@@ -168,6 +168,6 @@ extern pmd_t hash__pmdp_huge_get_and_clear(struct mm_struct *mm,
 extern int hash__has_transparent_hugepage(void);
 #endif
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* _ASM_POWERPC_BOOK3S_64_HASH_4K_H */
diff --git a/arch/powerpc/include/asm/book3s/64/hash-64k.h b/arch/powerpc/include/asm/book3s/64/hash-64k.h
index 0fb5b7da9478..7deb3a66890b 100644
--- a/arch/powerpc/include/asm/book3s/64/hash-64k.h
+++ b/arch/powerpc/include/asm/book3s/64/hash-64k.h
@@ -79,7 +79,7 @@
 #endif
 #define H_PMD_FRAG_NR	(PAGE_SIZE >> H_PMD_FRAG_SIZE_SHIFT)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <asm/errno.h>
 
 /*
@@ -281,6 +281,6 @@ extern pmd_t hash__pmdp_huge_get_and_clear(struct mm_struct *mm,
 extern int hash__has_transparent_hugepage(void);
 #endif /*  CONFIG_TRANSPARENT_HUGEPAGE */
 
-#endif	/* __ASSEMBLY__ */
+#endif	/* __ASSEMBLER__ */
 
 #endif /* _ASM_POWERPC_BOOK3S_64_HASH_64K_H */
diff --git a/arch/powerpc/include/asm/book3s/64/hash.h b/arch/powerpc/include/asm/book3s/64/hash.h
index 0755f2567021..5a8cbd496731 100644
--- a/arch/powerpc/include/asm/book3s/64/hash.h
+++ b/arch/powerpc/include/asm/book3s/64/hash.h
@@ -112,7 +112,7 @@
 #define H_PMD_BAD_BITS		(PTE_TABLE_SIZE-1)
 #define H_PUD_BAD_BITS		(PMD_TABLE_SIZE-1)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 static inline int get_region_id(unsigned long ea)
 {
 	int region_id;
@@ -295,6 +295,6 @@ int hash__create_section_mapping(unsigned long start, unsigned long end,
 				 int nid, pgprot_t prot);
 int hash__remove_section_mapping(unsigned long start, unsigned long end);
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_BOOK3S_64_HASH_H */
diff --git a/arch/powerpc/include/asm/book3s/64/kup.h b/arch/powerpc/include/asm/book3s/64/kup.h
index 497a7bd31ecc..03aec3c6c851 100644
--- a/arch/powerpc/include/asm/book3s/64/kup.h
+++ b/arch/powerpc/include/asm/book3s/64/kup.h
@@ -10,7 +10,7 @@
 #define AMR_KUEP_BLOCKED	UL(0x5455555555555555)
 #define AMR_KUAP_BLOCKED	(AMR_KUAP_BLOCK_READ | AMR_KUAP_BLOCK_WRITE)
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 .macro kuap_user_restore gpr1, gpr2
 #if defined(CONFIG_PPC_PKEY)
@@ -191,7 +191,7 @@
 #endif
 .endm
 
-#else /* !__ASSEMBLY__ */
+#else /* !__ASSEMBLER__ */
 
 #include <linux/jump_label.h>
 #include <linux/sched.h>
@@ -413,6 +413,6 @@ static __always_inline void restore_user_access(unsigned long flags)
 	if (static_branch_unlikely(&uaccess_flush_key) && flags == AMR_KUAP_BLOCKED)
 		do_uaccess_flush();
 }
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_POWERPC_BOOK3S_64_KUP_H */
diff --git a/arch/powerpc/include/asm/book3s/64/mmu-hash.h b/arch/powerpc/include/asm/book3s/64/mmu-hash.h
index 1c4eebbc69c9..346351423207 100644
--- a/arch/powerpc/include/asm/book3s/64/mmu-hash.h
+++ b/arch/powerpc/include/asm/book3s/64/mmu-hash.h
@@ -130,7 +130,7 @@
 #define POWER9_TLB_SETS_HASH	256	/* # sets in POWER9 TLB Hash mode */
 #define POWER9_TLB_SETS_RADIX	128	/* # sets in POWER9 TLB Radix mode */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 struct mmu_hash_ops {
 	void            (*hpte_invalidate)(unsigned long slot,
@@ -220,7 +220,7 @@ static inline unsigned long get_sllp_encoding(int psize)
 	return sllp;
 }
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 /*
  * Segment sizes.
@@ -248,7 +248,7 @@ static inline unsigned long get_sllp_encoding(int psize)
 #define LP_BITS		8
 #define LP_MASK(i)	((0xFF >> (i)) << LP_SHIFT)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 static inline int slb_vsid_shift(int ssize)
 {
@@ -532,7 +532,7 @@ void slb_set_size(u16 size);
 static inline void slb_set_size(u16 size) { }
 #endif
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 /*
  * VSID allocation (256MB segment)
@@ -668,7 +668,7 @@ static inline void slb_set_size(u16 size) { }
 #define SLICE_ARRAY_SIZE	(H_PGTABLE_RANGE >> 41)
 #define LOW_SLICE_ARRAY_SZ	(BITS_PER_LONG / BITS_PER_BYTE)
 #define TASK_SLICE_ARRAY_SZ(x)	((x)->hash_context->slb_addr_limit >> 41)
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #ifdef CONFIG_PPC_SUBPAGE_PROT
 /*
@@ -881,5 +881,5 @@ static inline unsigned long mk_vsid_data(unsigned long ea, int ssize,
 	return __mk_vsid_data(get_kernel_vsid(ea, ssize), ssize, flags);
 }
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif /* _ASM_POWERPC_BOOK3S_64_MMU_HASH_H_ */
diff --git a/arch/powerpc/include/asm/book3s/64/mmu.h b/arch/powerpc/include/asm/book3s/64/mmu.h
index fedbc5d38191..48631365b48c 100644
--- a/arch/powerpc/include/asm/book3s/64/mmu.h
+++ b/arch/powerpc/include/asm/book3s/64/mmu.h
@@ -4,7 +4,7 @@
 
 #include <asm/page.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 /*
  * Page size definition
  *
@@ -26,12 +26,12 @@ struct mmu_psize_def {
 	};
 };
 extern struct mmu_psize_def mmu_psize_defs[MMU_PAGE_COUNT];
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 /* 64-bit classic hash table MMU */
 #include <asm/book3s/64/mmu-hash.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 /*
  * ISA 3.0 partition and process table entry format
  */
@@ -288,5 +288,5 @@ static inline unsigned long get_user_vsid(mm_context_t *ctx,
 }
 #endif
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif /* _ASM_POWERPC_BOOK3S_64_MMU_H_ */
diff --git a/arch/powerpc/include/asm/book3s/64/pgtable-64k.h b/arch/powerpc/include/asm/book3s/64/pgtable-64k.h
index 4d8d7b4ea16b..004a03e97e58 100644
--- a/arch/powerpc/include/asm/book3s/64/pgtable-64k.h
+++ b/arch/powerpc/include/asm/book3s/64/pgtable-64k.h
@@ -2,7 +2,7 @@
 #ifndef _ASM_POWERPC_BOOK3S_64_PGTABLE_64K_H
 #define _ASM_POWERPC_BOOK3S_64_PGTABLE_64K_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #ifdef CONFIG_HUGETLB_PAGE
 
 #endif /* CONFIG_HUGETLB_PAGE */
@@ -14,5 +14,5 @@ static inline int remap_4k_pfn(struct vm_area_struct *vma, unsigned long addr,
 		BUG();
 	return hash__remap_4k_pfn(vma, addr, pfn, prot);
 }
-#endif	/* __ASSEMBLY__ */
+#endif	/* __ASSEMBLER__ */
 #endif /*_ASM_POWERPC_BOOK3S_64_PGTABLE_64K_H */
diff --git a/arch/powerpc/include/asm/book3s/64/pgtable.h b/arch/powerpc/include/asm/book3s/64/pgtable.h
index c19800365315..aac8ce30cd3b 100644
--- a/arch/powerpc/include/asm/book3s/64/pgtable.h
+++ b/arch/powerpc/include/asm/book3s/64/pgtable.h
@@ -4,7 +4,7 @@
 
 #include <asm-generic/pgtable-nop4d.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <linux/mmdebug.h>
 #include <linux/bug.h>
 #include <linux/sizes.h>
@@ -143,7 +143,7 @@
 #define PAGE_KERNEL_RO	__pgprot(_PAGE_BASE | _PAGE_KERNEL_RO)
 #define PAGE_KERNEL_ROX	__pgprot(_PAGE_BASE | _PAGE_KERNEL_ROX)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 /*
  * page table defines
  */
@@ -291,7 +291,7 @@ static inline unsigned long pud_leaf_size(pud_t pud)
 	else
 		return PUD_SIZE;
 }
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #include <asm/book3s/64/hash.h>
 #include <asm/book3s/64/radix.h>
@@ -327,7 +327,7 @@ static inline unsigned long pud_leaf_size(pud_t pud)
 #define FIXADDR_SIZE	SZ_32M
 #define FIXADDR_TOP	(IOREMAP_END + FIXADDR_SIZE)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 static inline unsigned long pte_update(struct mm_struct *mm, unsigned long addr,
 				       pte_t *ptep, unsigned long clr,
@@ -1381,5 +1381,5 @@ static inline bool is_pte_rw_upgrade(unsigned long old_val, unsigned long new_va
 	return false;
 }
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif /* _ASM_POWERPC_BOOK3S_64_PGTABLE_H_ */
diff --git a/arch/powerpc/include/asm/book3s/64/radix.h b/arch/powerpc/include/asm/book3s/64/radix.h
index df23a8267e4d..da954e779744 100644
--- a/arch/powerpc/include/asm/book3s/64/radix.h
+++ b/arch/powerpc/include/asm/book3s/64/radix.h
@@ -4,7 +4,7 @@
 
 #include <asm/asm-const.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <asm/cmpxchg.h>
 #endif
 
@@ -14,7 +14,7 @@
 #include <asm/book3s/64/radix-4k.h>
 #endif
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <asm/book3s/64/tlbflush-radix.h>
 #include <asm/cpu_has_feature.h>
 #endif
@@ -132,7 +132,7 @@
 #define RADIX_VMEMMAP_SIZE	RADIX_KERN_MAP_SIZE
 #define RADIX_VMEMMAP_END	(RADIX_VMEMMAP_START + RADIX_VMEMMAP_SIZE)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #define RADIX_PTE_TABLE_SIZE	(sizeof(pte_t) << RADIX_PTE_INDEX_SIZE)
 #define RADIX_PMD_TABLE_SIZE	(sizeof(pmd_t) << RADIX_PMD_INDEX_SIZE)
 #define RADIX_PUD_TABLE_SIZE	(sizeof(pud_t) << RADIX_PUD_INDEX_SIZE)
@@ -362,5 +362,5 @@ int __meminit vmemmap_populate_compound_pages(unsigned long start_pfn,
 					      unsigned long start,
 					      unsigned long end, int node,
 					      struct dev_pagemap *pgmap);
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif
diff --git a/arch/powerpc/include/asm/book3s/64/slice.h b/arch/powerpc/include/asm/book3s/64/slice.h
index 5fbe18544cbd..6e2f7a74cd75 100644
--- a/arch/powerpc/include/asm/book3s/64/slice.h
+++ b/arch/powerpc/include/asm/book3s/64/slice.h
@@ -2,7 +2,7 @@
 #ifndef _ASM_POWERPC_BOOK3S_64_SLICE_H
 #define _ASM_POWERPC_BOOK3S_64_SLICE_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #ifdef CONFIG_PPC_64S_HASH_MMU
 #ifdef CONFIG_HUGETLB_PAGE
@@ -37,6 +37,6 @@ void slice_set_range_psize(struct mm_struct *mm, unsigned long start,
 void slice_init_new_context_exec(struct mm_struct *mm);
 void slice_setup_new_exec(void);
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_POWERPC_BOOK3S_64_SLICE_H */
diff --git a/arch/powerpc/include/asm/bug.h b/arch/powerpc/include/asm/bug.h
index 1db485aacbd9..bbaa7e81f821 100644
--- a/arch/powerpc/include/asm/bug.h
+++ b/arch/powerpc/include/asm/bug.h
@@ -7,7 +7,7 @@
 
 #ifdef CONFIG_BUG
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #include <asm/asm-offsets.h>
 #ifdef CONFIG_DEBUG_BUGVERBOSE
 .macro EMIT_BUG_ENTRY addr,file,line,flags
@@ -31,7 +31,7 @@
 .endm
 #endif /* verbose */
 
-#else /* !__ASSEMBLY__ */
+#else /* !__ASSEMBLER__ */
 /* _EMIT_BUG_ENTRY expects args %0,%1,%2,%3 to be FILE, LINE, flags and
    sizeof(struct bug_entry), respectively */
 #ifdef CONFIG_DEBUG_BUGVERBOSE
@@ -101,12 +101,12 @@
 #define HAVE_ARCH_WARN_ON
 #endif
 
-#endif /* __ASSEMBLY __ */
+#endif /* __ASSEMBLER__ */
 #else
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 .macro EMIT_BUG_ENTRY addr,file,line,flags
 .endm
-#else /* !__ASSEMBLY__ */
+#else /* !__ASSEMBLER__ */
 #define _EMIT_BUG_ENTRY
 #endif
 #endif /* CONFIG_BUG */
@@ -115,7 +115,7 @@
 
 #include <asm-generic/bug.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 struct pt_regs;
 void hash__do_page_fault(struct pt_regs *);
@@ -128,7 +128,7 @@ void die_mce(const char *str, struct pt_regs *regs, long err);
 extern bool die_will_crash(void);
 extern void panic_flush_kmsg_start(void);
 extern void panic_flush_kmsg_end(void);
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_BUG_H */
diff --git a/arch/powerpc/include/asm/cache.h b/arch/powerpc/include/asm/cache.h
index 69232231d270..6796babc4d31 100644
--- a/arch/powerpc/include/asm/cache.h
+++ b/arch/powerpc/include/asm/cache.h
@@ -37,7 +37,7 @@
 #define ARCH_DMA_MINALIGN	L1_CACHE_BYTES
 #endif
 
-#if !defined(__ASSEMBLY__)
+#if !defined(__ASSEMBLER__)
 #ifdef CONFIG_PPC64
 
 struct ppc_cache_info {
@@ -145,6 +145,6 @@ static inline void iccci(void *addr)
 	asm volatile ("iccci 0, %0" : : "r"(addr) : "memory");
 }
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_CACHE_H */
diff --git a/arch/powerpc/include/asm/cpu_has_feature.h b/arch/powerpc/include/asm/cpu_has_feature.h
index bf8a228229fa..604fa3b6c33d 100644
--- a/arch/powerpc/include/asm/cpu_has_feature.h
+++ b/arch/powerpc/include/asm/cpu_has_feature.h
@@ -2,7 +2,7 @@
 #ifndef __ASM_POWERPC_CPU_HAS_FEATURE_H
 #define __ASM_POWERPC_CPU_HAS_FEATURE_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/bug.h>
 #include <asm/cputable.h>
@@ -51,5 +51,5 @@ static __always_inline bool cpu_has_feature(unsigned long feature)
 }
 #endif
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif /* __ASM_POWERPC_CPU_HAS_FEATURE_H */
diff --git a/arch/powerpc/include/asm/cpuidle.h b/arch/powerpc/include/asm/cpuidle.h
index 0cce5dc7fb1c..054cd2fcfd55 100644
--- a/arch/powerpc/include/asm/cpuidle.h
+++ b/arch/powerpc/include/asm/cpuidle.h
@@ -68,7 +68,7 @@
 #define ERR_EC_ESL_MISMATCH		-1
 #define ERR_DEEP_STATE_ESL_MISMATCH	-2
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #define PNV_IDLE_NAME_LEN    16
 struct pnv_idle_states_t {
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index 29a529d2ab8b..ec16c12296da 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -7,7 +7,7 @@
 #include <uapi/asm/cputable.h>
 #include <asm/asm-const.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /* This structure can grow, it's real size is used by head.S code
  * via the mkdefs mechanism.
@@ -103,7 +103,7 @@ extern void cpu_feature_keys_init(void);
 static inline void cpu_feature_keys_init(void) { }
 #endif
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 /* CPU kernel features */
 
@@ -195,7 +195,7 @@ static inline void cpu_feature_keys_init(void) { }
 #define CPU_FTR_DEXCR_NPHIE		LONG_ASM_CONST(0x0010000000000000)
 #define CPU_FTR_P11_PVR			LONG_ASM_CONST(0x0020000000000000)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #define CPU_FTR_PPCAS_ARCH_V2	(CPU_FTR_NOEXECUTE)
 
@@ -602,6 +602,6 @@ enum {
  */
 #define HBP_NUM_MAX	2
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* __ASM_POWERPC_CPUTABLE_H */
diff --git a/arch/powerpc/include/asm/cputhreads.h b/arch/powerpc/include/asm/cputhreads.h
index f26c430f3982..d06f2b20b810 100644
--- a/arch/powerpc/include/asm/cputhreads.h
+++ b/arch/powerpc/include/asm/cputhreads.h
@@ -2,7 +2,7 @@
 #ifndef _ASM_POWERPC_CPUTHREADS_H
 #define _ASM_POWERPC_CPUTHREADS_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <linux/cpumask.h>
 #include <asm/cpu_has_feature.h>
 
@@ -107,7 +107,7 @@ static inline u32 get_tensr(void)
 void book3e_start_thread(int thread, unsigned long addr);
 void book3e_stop_thread(int thread);
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #define INVALID_THREAD_HWID	0x0fff
 
diff --git a/arch/powerpc/include/asm/dbell.h b/arch/powerpc/include/asm/dbell.h
index 3e9da22a2779..0b9ef726f92c 100644
--- a/arch/powerpc/include/asm/dbell.h
+++ b/arch/powerpc/include/asm/dbell.h
@@ -40,12 +40,6 @@ static inline void _ppc_msgsnd(u32 msg)
 				: : "i" (CPU_FTR_HVMODE), "r" (msg));
 }
 
-/* sync before sending message */
-static inline void ppc_msgsnd_sync(void)
-{
-	__asm__ __volatile__ ("sync" : : : "memory");
-}
-
 /* sync after taking message interrupt */
 static inline void ppc_msgsync(void)
 {
@@ -76,12 +70,6 @@ static inline void _ppc_msgsnd(u32 msg)
 	__asm__ __volatile__ (PPC_MSGSND(%0) : : "r" (msg));
 }
 
-/* sync before sending message */
-static inline void ppc_msgsnd_sync(void)
-{
-	__asm__ __volatile__ ("sync" : : : "memory");
-}
-
 /* sync after taking message interrupt */
 static inline void ppc_msgsync(void)
 {
@@ -91,6 +79,12 @@ static inline void ppc_msgsync(void)
 
 extern void doorbell_exception(struct pt_regs *regs);
 
+/* sync before sending message */
+static inline void ppc_msgsnd_sync(void)
+{
+	__asm__ __volatile__ ("sync" : : : "memory");
+}
+
 static inline void ppc_msgsnd(enum ppc_dbell type, u32 flags, u32 tag)
 {
 	u32 msg = PPC_DBELL_TYPE(type) | (flags & PPC_DBELL_MSG_BRDCAST) |
diff --git a/arch/powerpc/include/asm/dcr-native.h b/arch/powerpc/include/asm/dcr-native.h
index a92059964579..65b3fc2dc404 100644
--- a/arch/powerpc/include/asm/dcr-native.h
+++ b/arch/powerpc/include/asm/dcr-native.h
@@ -7,7 +7,7 @@
 #ifndef _ASM_POWERPC_DCR_NATIVE_H
 #define _ASM_POWERPC_DCR_NATIVE_H
 #ifdef __KERNEL__
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/spinlock.h>
 #include <asm/cputable.h>
@@ -139,6 +139,6 @@ static inline void __dcri_clrset(int base_addr, int base_data, int reg,
 							      DCRN_ ## base ## _CONFIG_DATA,	\
 							      reg, clr, set)
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_DCR_NATIVE_H */
diff --git a/arch/powerpc/include/asm/dcr.h b/arch/powerpc/include/asm/dcr.h
index 180021cd0b30..3c0fac2cc2b2 100644
--- a/arch/powerpc/include/asm/dcr.h
+++ b/arch/powerpc/include/asm/dcr.h
@@ -7,7 +7,7 @@
 #ifndef _ASM_POWERPC_DCR_H
 #define _ASM_POWERPC_DCR_H
 #ifdef __KERNEL__
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #ifdef CONFIG_PPC_DCR
 
 #include <asm/dcr-native.h>
@@ -28,6 +28,6 @@ extern unsigned int dcr_resource_start(const struct device_node *np,
 extern unsigned int dcr_resource_len(const struct device_node *np,
 				     unsigned int index);
 #endif /* CONFIG_PPC_DCR */
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_DCR_H */
diff --git a/arch/powerpc/include/asm/epapr_hcalls.h b/arch/powerpc/include/asm/epapr_hcalls.h
index cdf3c6df5123..8fc5aaa4bbba 100644
--- a/arch/powerpc/include/asm/epapr_hcalls.h
+++ b/arch/powerpc/include/asm/epapr_hcalls.h
@@ -52,7 +52,7 @@
 
 #include <uapi/asm/epapr_hcalls.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <asm/byteorder.h>
@@ -571,5 +571,5 @@ static inline long epapr_hypercall4(unsigned int nr, unsigned long p1,
 	in[3] = p4;
 	return epapr_hypercall(in, out, nr);
 }
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 #endif /* _EPAPR_HCALLS_H */
diff --git a/arch/powerpc/include/asm/exception-64e.h b/arch/powerpc/include/asm/exception-64e.h
index b1ef1e92c34a..1a83b1ff3578 100644
--- a/arch/powerpc/include/asm/exception-64e.h
+++ b/arch/powerpc/include/asm/exception-64e.h
@@ -149,7 +149,7 @@ exc_##label##_book3e:
 	addi	r11,r13,PACA_EXTLB;					    \
 	TLB_MISS_RESTORE(r11)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 extern unsigned int interrupt_base_book3e;
 #endif
 
diff --git a/arch/powerpc/include/asm/exception-64s.h b/arch/powerpc/include/asm/exception-64s.h
index bb6f78fcf981..a9437e89f69f 100644
--- a/arch/powerpc/include/asm/exception-64s.h
+++ b/arch/powerpc/include/asm/exception-64s.h
@@ -53,7 +53,7 @@
  */
 #define MAX_MCE_DEPTH	4
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 #define STF_ENTRY_BARRIER_SLOT						\
 	STF_ENTRY_BARRIER_FIXUP_SECTION;				\
@@ -170,9 +170,9 @@
 	RFSCV;								\
 	b	rfscv_flush_fallback
 
-#else /* __ASSEMBLY__ */
+#else /* __ASSEMBLER__ */
 /* Prototype for function defined in exceptions-64s.S */
 void do_uaccess_flush(void);
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif	/* _ASM_POWERPC_EXCEPTION_H */
diff --git a/arch/powerpc/include/asm/extable.h b/arch/powerpc/include/asm/extable.h
index 26ce2e5c0fa8..d483a9c24ba9 100644
--- a/arch/powerpc/include/asm/extable.h
+++ b/arch/powerpc/include/asm/extable.h
@@ -17,7 +17,7 @@
 
 #define ARCH_HAS_RELATIVE_EXTABLE
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 struct exception_table_entry {
 	int insn;
diff --git a/arch/powerpc/include/asm/feature-fixups.h b/arch/powerpc/include/asm/feature-fixups.h
index 17d168dd8b49..756a6c694018 100644
--- a/arch/powerpc/include/asm/feature-fixups.h
+++ b/arch/powerpc/include/asm/feature-fixups.h
@@ -168,7 +168,7 @@ label##5:							\
 #define ALT_FW_FTR_SECTION_END_IFCLR(msk)	\
 	ALT_FW_FTR_SECTION_END_NESTED_IFCLR(msk, 97)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #define ASM_FTR_IF(section_if, section_else, msk, val)	\
 	stringify_in_c(BEGIN_FTR_SECTION)			\
@@ -196,7 +196,7 @@ label##5:							\
 #define ASM_MMU_FTR_IFCLR(section_if, section_else, msk)	\
 	ASM_MMU_FTR_IF(section_if, section_else, (msk), 0)
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 /* LWSYNC feature sections */
 #define START_LWSYNC_SECTION(label)	label##1:
@@ -276,7 +276,7 @@ label##3:					       	\
 	FTR_ENTRY_OFFSET 956b-957b;			\
 	.popsection;
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <linux/types.h>
 
 extern long stf_barrier_fallback;
diff --git a/arch/powerpc/include/asm/firmware.h b/arch/powerpc/include/asm/firmware.h
index 69ae9cf57d50..abd7c56f4d55 100644
--- a/arch/powerpc/include/asm/firmware.h
+++ b/arch/powerpc/include/asm/firmware.h
@@ -58,7 +58,7 @@
 #define FW_FEATURE_WATCHDOG	ASM_CONST(0x0000080000000000)
 #define FW_FEATURE_PLPKS	ASM_CONST(0x0000100000000000)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 enum {
 #ifdef CONFIG_PPC64
@@ -146,6 +146,6 @@ void pseries_probe_fw_features(void);
 static inline void pseries_probe_fw_features(void) { }
 #endif
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif /* __KERNEL__ */
 #endif /* __ASM_POWERPC_FIRMWARE_H */
diff --git a/arch/powerpc/include/asm/fixmap.h b/arch/powerpc/include/asm/fixmap.h
index f9068dd8dfce..bc5109eab5b7 100644
--- a/arch/powerpc/include/asm/fixmap.h
+++ b/arch/powerpc/include/asm/fixmap.h
@@ -14,7 +14,7 @@
 #ifndef _ASM_FIXMAP_H
 #define _ASM_FIXMAP_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <linux/sizes.h>
 #include <linux/pgtable.h>
 #include <asm/page.h>
@@ -111,5 +111,5 @@ static inline void __set_fixmap(enum fixed_addresses idx,
 #define VIRT_IMMR_BASE (__fix_to_virt(FIX_IMMR_BASE))
 #endif
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 #endif
diff --git a/arch/powerpc/include/asm/floppy.h b/arch/powerpc/include/asm/floppy.h
index 34abf8bea2cc..f4dc657638b3 100644
--- a/arch/powerpc/include/asm/floppy.h
+++ b/arch/powerpc/include/asm/floppy.h
@@ -206,11 +206,6 @@ static int FDC2 = -1;
 #define N_FDC 2			/* Don't change this! */
 #define N_DRIVE 8
 
-/*
- * The PowerPC has no problems with floppy DMA crossing 64k borders.
- */
-#define CROSS_64KB(a,s)	(0)
-
 #define EXTRA_FLOPPY_PARAMS
 
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/fprobe.h b/arch/powerpc/include/asm/fprobe.h
new file mode 100644
index 000000000000..d64bc28fb3d3
--- /dev/null
+++ b/arch/powerpc/include/asm/fprobe.h
@@ -0,0 +1,12 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef _ASM_PPC_FPROBE_H
+#define _ASM_PPC_FPROBE_H
+
+#include <asm-generic/fprobe.h>
+
+#ifdef CONFIG_64BIT
+#undef FPROBE_HEADER_MSB_PATTERN
+#define FPROBE_HEADER_MSB_PATTERN	(PAGE_OFFSET & ~FPROBE_HEADER_MSB_MASK)
+#endif
+
+#endif /* _ASM_PPC_FPROBE_H */
diff --git a/arch/powerpc/include/asm/ftrace.h b/arch/powerpc/include/asm/ftrace.h
index 82da7c7a1d12..5984eaa75ce8 100644
--- a/arch/powerpc/include/asm/ftrace.h
+++ b/arch/powerpc/include/asm/ftrace.h
@@ -15,7 +15,7 @@
 #define FTRACE_MCOUNT_MAX_OFFSET	8
 #endif
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 extern void _mcount(void);
 
 unsigned long prepare_ftrace_return(unsigned long parent, unsigned long ip,
@@ -50,6 +50,21 @@ static __always_inline struct pt_regs *arch_ftrace_get_regs(struct ftrace_regs *
 		asm volatile("mfmsr %0" : "=r" ((_regs)->msr));	\
 	} while (0)
 
+#undef ftrace_regs_get_return_value
+static __always_inline unsigned long
+ftrace_regs_get_return_value(const struct ftrace_regs *fregs)
+{
+	return arch_ftrace_regs(fregs)->regs.gpr[3];
+}
+#define ftrace_regs_get_return_value ftrace_regs_get_return_value
+
+#undef ftrace_regs_get_frame_pointer
+static __always_inline unsigned long
+ftrace_regs_get_frame_pointer(const struct ftrace_regs *fregs)
+{
+	return arch_ftrace_regs(fregs)->regs.gpr[1];
+}
+
 static __always_inline void
 ftrace_regs_set_instruction_pointer(struct ftrace_regs *fregs,
 				    unsigned long ip)
@@ -69,14 +84,14 @@ struct ftrace_ops;
 void ftrace_graph_func(unsigned long ip, unsigned long parent_ip,
 		       struct ftrace_ops *op, struct ftrace_regs *fregs);
 #endif
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #ifdef CONFIG_DYNAMIC_FTRACE_WITH_REGS
 #define ARCH_SUPPORTS_FTRACE_OPS 1
 #endif
 #endif /* CONFIG_FUNCTION_TRACER */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #ifdef CONFIG_FTRACE_SYSCALLS
 /*
  * Some syscall entry functions on powerpc start with "ppc_" (fork and clone,
@@ -160,6 +175,6 @@ static inline void arch_ftrace_set_direct_caller(struct ftrace_regs *fregs, unsi
 static inline void ftrace_free_init_tramp(void) { }
 static inline unsigned long ftrace_call_adjust(unsigned long addr) { return addr; }
 #endif
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* _ASM_POWERPC_FTRACE */
diff --git a/arch/powerpc/include/asm/head-64.h b/arch/powerpc/include/asm/head-64.h
index d73153b0275d..3966bd5810cb 100644
--- a/arch/powerpc/include/asm/head-64.h
+++ b/arch/powerpc/include/asm/head-64.h
@@ -4,7 +4,7 @@
 
 #include <asm/cache.h>
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 /*
  * We can't do CPP stringification and concatination directly into the section
  * name for some reason, so these macros can do it for us.
@@ -167,6 +167,6 @@ name:
 // find label from _within_ sname
 #define ABS_ADDR(label, sname) (label - start_ ## sname + sname ## _start)
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif	/* _ASM_POWERPC_HEAD_64_H */
diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h
index ea6c8dc400d2..9aef16149d92 100644
--- a/arch/powerpc/include/asm/hvcall.h
+++ b/arch/powerpc/include/asm/hvcall.h
@@ -534,7 +534,7 @@
 #define H_HTM_TARGET_NODAL_CHIP_INDEX(x)       ((unsigned long)(x)<<(63-31))
 #define H_HTM_TARGET_CORE_INDEX_ON_CHIP(x)     ((unsigned long)(x)<<(63-47))
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <linux/types.h>
 
 /**
@@ -735,6 +735,6 @@ struct hv_gpci_request_buffer {
 	uint8_t bytes[HGPCI_MAX_DATA_BYTES];
 } __packed;
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_HVCALL_H */
diff --git a/arch/powerpc/include/asm/hw_irq.h b/arch/powerpc/include/asm/hw_irq.h
index 569ac1165b06..1078ba88efaf 100644
--- a/arch/powerpc/include/asm/hw_irq.h
+++ b/arch/powerpc/include/asm/hw_irq.h
@@ -59,7 +59,7 @@
 #define IRQS_PMI_DISABLED	2
 #define IRQS_ALL_DISABLED	(IRQS_DISABLED | IRQS_PMI_DISABLED)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 static inline void __hard_irq_enable(void)
 {
@@ -516,6 +516,6 @@ static inline unsigned long mtmsr_isync_irqsafe(unsigned long msr)
 
 #define ARCH_IRQ_INIT_FLAGS	IRQ_NOREQUEST
 
-#endif  /* __ASSEMBLY__ */
+#endif  /* __ASSEMBLER__ */
 #endif	/* __KERNEL__ */
 #endif	/* _ASM_POWERPC_HW_IRQ_H */
diff --git a/arch/powerpc/include/asm/inst.h b/arch/powerpc/include/asm/inst.h
index 684d3f453282..ffa82167c860 100644
--- a/arch/powerpc/include/asm/inst.h
+++ b/arch/powerpc/include/asm/inst.h
@@ -143,10 +143,6 @@ static inline int __copy_inst_from_kernel_nofault(ppc_inst_t *inst, u32 *src)
 {
 	unsigned int val, suffix;
 
-/* See https://github.com/ClangBuiltLinux/linux/issues/1521 */
-#if defined(CONFIG_CC_IS_CLANG) && CONFIG_CLANG_VERSION < 140000
-	val = suffix = 0;
-#endif
 	__get_kernel_nofault(&val, src, u32, Efault);
 	if (IS_ENABLED(CONFIG_PPC64) && get_op(val) == OP_PREFIX) {
 		__get_kernel_nofault(&suffix, src + 1, u32, Efault);
diff --git a/arch/powerpc/include/asm/interrupt.h b/arch/powerpc/include/asm/interrupt.h
index 23638d4e73ac..eb0e4a20b818 100644
--- a/arch/powerpc/include/asm/interrupt.h
+++ b/arch/powerpc/include/asm/interrupt.h
@@ -64,7 +64,7 @@
 #define INTERRUPT_DATA_LOAD_TLB_MISS_603	0x1100
 #define INTERRUPT_DATA_STORE_TLB_MISS_603	0x1200
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/context_tracking.h>
 #include <linux/hardirq.h>
@@ -675,6 +675,6 @@ unsigned long interrupt_exit_user_restart(struct pt_regs *regs);
 unsigned long interrupt_exit_kernel_restart(struct pt_regs *regs);
 #endif
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_POWERPC_INTERRUPT_H */
diff --git a/arch/powerpc/include/asm/irqflags.h b/arch/powerpc/include/asm/irqflags.h
index 47d46712928a..1351fb40fe74 100644
--- a/arch/powerpc/include/asm/irqflags.h
+++ b/arch/powerpc/include/asm/irqflags.h
@@ -5,7 +5,7 @@
 #ifndef _ASM_IRQFLAGS_H
 #define _ASM_IRQFLAGS_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 /*
  * Get definitions for arch_local_save_flags(x), etc.
  */
diff --git a/arch/powerpc/include/asm/jump_label.h b/arch/powerpc/include/asm/jump_label.h
index 2f2a86ed2280..d4eaba459a0e 100644
--- a/arch/powerpc/include/asm/jump_label.h
+++ b/arch/powerpc/include/asm/jump_label.h
@@ -6,7 +6,7 @@
  * Copyright 2010 Michael Ellerman, IBM Corp.
  */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <linux/types.h>
 
 #include <asm/feature-fixups.h>
diff --git a/arch/powerpc/include/asm/kasan.h b/arch/powerpc/include/asm/kasan.h
index b5bbb94c51f6..db1214944622 100644
--- a/arch/powerpc/include/asm/kasan.h
+++ b/arch/powerpc/include/asm/kasan.h
@@ -12,7 +12,7 @@
 #define EXPORT_SYMBOL_KASAN(fn)
 #endif
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/page.h>
 #include <linux/sizes.h>
@@ -80,5 +80,5 @@ void kasan_update_early_region(unsigned long k_start, unsigned long k_end, pte_t
 int kasan_init_shadow_page_tables(unsigned long k_start, unsigned long k_end);
 int kasan_init_region(void *start, size_t size);
 
-#endif /* __ASSEMBLY */
+#endif /* __ASSEMBLER__ */
 #endif
diff --git a/arch/powerpc/include/asm/kdump.h b/arch/powerpc/include/asm/kdump.h
index fd128d1e52b3..802644178f43 100644
--- a/arch/powerpc/include/asm/kdump.h
+++ b/arch/powerpc/include/asm/kdump.h
@@ -31,7 +31,7 @@
 
 #endif /* CONFIG_CRASH_DUMP */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #if defined(CONFIG_CRASH_DUMP) && !defined(CONFIG_NONSTATIC_KERNEL)
 extern void reserve_kdump_trampoline(void);
@@ -42,6 +42,6 @@ static inline void reserve_kdump_trampoline(void) { ; }
 static inline void setup_kdump_trampoline(void) { ; }
 #endif
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* __PPC64_KDUMP_H */
diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h
index 70f2f0517509..4bbf9f699aaa 100644
--- a/arch/powerpc/include/asm/kexec.h
+++ b/arch/powerpc/include/asm/kexec.h
@@ -49,7 +49,7 @@
 #define KEXEC_STATE_IRQS_OFF 1
 #define KEXEC_STATE_REAL_MODE 2
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <asm/reg.h>
 
 typedef void (*crash_shutdown_t)(void);
@@ -210,6 +210,6 @@ static inline void reset_sprs(void)
 }
 #endif
 
-#endif /* ! __ASSEMBLY__ */
+#endif /* ! __ASSEMBLER__ */
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_KEXEC_H */
diff --git a/arch/powerpc/include/asm/kgdb.h b/arch/powerpc/include/asm/kgdb.h
index 715c18b75334..f39531903325 100644
--- a/arch/powerpc/include/asm/kgdb.h
+++ b/arch/powerpc/include/asm/kgdb.h
@@ -21,7 +21,7 @@
 #ifndef __POWERPC_KGDB_H__
 #define __POWERPC_KGDB_H__
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #define BREAK_INSTR_SIZE	4
 #define BUFMAX			((NUMREGBYTES * 2) + 512)
@@ -62,6 +62,6 @@ static inline void arch_kgdb_breakpoint(void)
 /* CR/LR, R1, R2, R13-R31 inclusive. */
 #define NUMCRITREGBYTES		(23 * sizeof(int))
 #endif /* 32/64 */
-#endif /* !(__ASSEMBLY__) */
+#endif /* !(__ASSEMBLER__) */
 #endif /* !__POWERPC_KGDB_H__ */
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/kup.h b/arch/powerpc/include/asm/kup.h
index 2bb03d941e3e..dab63b82a8d4 100644
--- a/arch/powerpc/include/asm/kup.h
+++ b/arch/powerpc/include/asm/kup.h
@@ -6,7 +6,7 @@
 #define KUAP_WRITE	2
 #define KUAP_READ_WRITE	(KUAP_READ | KUAP_WRITE)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <linux/types.h>
 
 static __always_inline bool kuap_is_disabled(void);
@@ -28,14 +28,14 @@ static __always_inline bool kuap_is_disabled(void);
 #include <asm/book3s/32/kup.h>
 #endif
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #ifndef CONFIG_PPC_KUAP
 .macro kuap_check_amr	gpr1, gpr2
 .endm
 
 #endif
 
-#else /* !__ASSEMBLY__ */
+#else /* !__ASSEMBLER__ */
 
 extern bool disable_kuep;
 extern bool disable_kuap;
@@ -181,6 +181,6 @@ static __always_inline void prevent_current_write_to_user(void)
 	prevent_user_access(KUAP_WRITE);
 }
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* _ASM_POWERPC_KUAP_H_ */
diff --git a/arch/powerpc/include/asm/kvm_asm.h b/arch/powerpc/include/asm/kvm_asm.h
index d68d71987d5c..f9af8df09077 100644
--- a/arch/powerpc/include/asm/kvm_asm.h
+++ b/arch/powerpc/include/asm/kvm_asm.h
@@ -9,7 +9,7 @@
 #ifndef __POWERPC_KVM_ASM_H__
 #define __POWERPC_KVM_ASM_H__
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #ifdef CONFIG_64BIT
 #define PPC_STD(sreg, offset, areg)  std sreg, (offset)(areg)
 #define PPC_LD(treg, offset, areg)   ld treg, (offset)(areg)
diff --git a/arch/powerpc/include/asm/kvm_book3s_asm.h b/arch/powerpc/include/asm/kvm_book3s_asm.h
index a36797938620..3435fe144908 100644
--- a/arch/powerpc/include/asm/kvm_book3s_asm.h
+++ b/arch/powerpc/include/asm/kvm_book3s_asm.h
@@ -20,7 +20,7 @@
 /* Maximum number of subcores per physical core */
 #define MAX_SUBCORES		4
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 #ifdef CONFIG_KVM_BOOK3S_HANDLER
 
@@ -58,7 +58,7 @@ kvmppc_resume_\intno:
 
 #endif /* CONFIG_KVM_BOOK3S_HANDLER */
 
-#else  /*__ASSEMBLY__ */
+#else  /*__ASSEMBLER__ */
 
 struct kvmppc_vcore;
 
@@ -150,7 +150,7 @@ struct kvmppc_book3s_shadow_vcpu {
 #endif
 };
 
-#endif /*__ASSEMBLY__ */
+#endif /*__ASSEMBLER__ */
 
 /* Values for kvm_state */
 #define KVM_HWTHREAD_IN_KERNEL	0
diff --git a/arch/powerpc/include/asm/kvm_booke_hv_asm.h b/arch/powerpc/include/asm/kvm_booke_hv_asm.h
index 7487ef582121..3acf2995d364 100644
--- a/arch/powerpc/include/asm/kvm_booke_hv_asm.h
+++ b/arch/powerpc/include/asm/kvm_booke_hv_asm.h
@@ -8,7 +8,7 @@
 
 #include <asm/feature-fixups.h>
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 /*
  * All exceptions from guest state must go through KVM
@@ -64,5 +64,5 @@ END_FTR_SECTION_IFSET(CPU_FTR_EMB_HV)
 #endif
 .endm
 
-#endif /*__ASSEMBLY__ */
+#endif /*__ASSEMBLER__ */
 #endif /* ASM_KVM_BOOKE_HV_ASM_H */
diff --git a/arch/powerpc/include/asm/lv1call.h b/arch/powerpc/include/asm/lv1call.h
index b11501b30193..ae70120953a8 100644
--- a/arch/powerpc/include/asm/lv1call.h
+++ b/arch/powerpc/include/asm/lv1call.h
@@ -10,7 +10,7 @@
 #if !defined(_ASM_POWERPC_LV1CALL_H)
 #define _ASM_POWERPC_LV1CALL_H
 
-#if !defined(__ASSEMBLY__)
+#if !defined(__ASSEMBLER__)
 
 #include <linux/types.h>
 #include <linux/export.h>
@@ -211,7 +211,7 @@
     {return _lv1_##name(LV1_##in##_IN_##out##_OUT_ARGS);}
 #endif
 
-#endif /* !defined(__ASSEMBLY__) */
+#endif /* !defined(__ASSEMBLER__) */
 
 /* lv1 call table */
 
diff --git a/arch/powerpc/include/asm/mmu.h b/arch/powerpc/include/asm/mmu.h
index 4182d68d9cd1..5f9c5d436e17 100644
--- a/arch/powerpc/include/asm/mmu.h
+++ b/arch/powerpc/include/asm/mmu.h
@@ -137,7 +137,7 @@
 				MMU_FTR_CI_LARGE_PAGE
 #define MMU_FTRS_PA6T		MMU_FTRS_DEFAULT_HPTE_ARCH_V2 | \
 				MMU_FTR_CI_LARGE_PAGE | MMU_FTR_NO_SLBIE_B
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <linux/bug.h>
 #include <asm/cputable.h>
 #include <asm/page.h>
@@ -332,7 +332,7 @@ static inline bool strict_module_rwx_enabled(void)
 {
 	return IS_ENABLED(CONFIG_STRICT_MODULE_RWX) && strict_kernel_rwx_enabled();
 }
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 /* The kernel use the constants below to index in the page sizes array.
  * The use of fixed constants for this purpose is better for performances
@@ -377,7 +377,7 @@ static inline bool strict_module_rwx_enabled(void)
 #include <asm/book3s/64/mmu.h>
 #else /* CONFIG_PPC_BOOK3S_64 */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 /* MMU initialization */
 extern void early_init_mmu(void);
 extern void early_init_mmu_secondary(void);
@@ -388,7 +388,7 @@ static inline void mmu_early_init_devtree(void) { }
 static inline void pkey_early_init_devtree(void) {}
 
 extern void *abatron_pteptrs[2];
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif
 
 #if defined(CONFIG_PPC_BOOK3S_32)
diff --git a/arch/powerpc/include/asm/module.h b/arch/powerpc/include/asm/module.h
index e1ee5026ac4a..864e22deaa2c 100644
--- a/arch/powerpc/include/asm/module.h
+++ b/arch/powerpc/include/asm/module.h
@@ -27,6 +27,7 @@ struct ppc_plt_entry {
 struct mod_arch_specific {
 #ifdef __powerpc64__
 	unsigned int stubs_section;	/* Index of stubs section in module */
+	unsigned int stub_count;	/* Number of stubs used */
 #ifdef CONFIG_PPC_KERNEL_PCREL
 	unsigned int got_section;	/* What section is the GOT? */
 	unsigned int pcpu_section;	/* .data..percpu section */
diff --git a/arch/powerpc/include/asm/mpc52xx.h b/arch/powerpc/include/asm/mpc52xx.h
index 01ae6c351e50..d7ffbd06797d 100644
--- a/arch/powerpc/include/asm/mpc52xx.h
+++ b/arch/powerpc/include/asm/mpc52xx.h
@@ -13,10 +13,10 @@
 #ifndef __ASM_POWERPC_MPC52xx_H__
 #define __ASM_POWERPC_MPC52xx_H__
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <asm/types.h>
 #include <asm/mpc5xxx.h>
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #include <linux/suspend.h>
 
@@ -30,7 +30,7 @@
 /* Structures mapping of some unit register set                             */
 /* ======================================================================== */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /* Memory Mapping Control */
 struct mpc52xx_mmap_ctl {
@@ -258,14 +258,14 @@ struct mpc52xx_intr {
 	u32 per_error;		/* INTR + 0x38 */
 };
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 
 /* ========================================================================= */
 /* Prototypes for MPC52xx sysdev                                             */
 /* ========================================================================= */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 struct device_node;
 
@@ -297,7 +297,7 @@ extern void __init mpc52xx_setup_pci(void);
 static inline void mpc52xx_setup_pci(void) { }
 #endif
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #ifdef CONFIG_PM
 struct mpc52xx_suspend {
diff --git a/arch/powerpc/include/asm/nohash/32/kup-8xx.h b/arch/powerpc/include/asm/nohash/32/kup-8xx.h
index 46bc5925e5fd..08486b15b207 100644
--- a/arch/powerpc/include/asm/nohash/32/kup-8xx.h
+++ b/arch/powerpc/include/asm/nohash/32/kup-8xx.h
@@ -7,7 +7,7 @@
 
 #ifdef CONFIG_PPC_KUAP
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/reg.h>
 
@@ -82,7 +82,7 @@ __bad_kuap_fault(struct pt_regs *regs, unsigned long address, bool is_write)
 	return !((regs->kuap ^ MD_APG_KUAP) & 0xff000000);
 }
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* CONFIG_PPC_KUAP */
 
diff --git a/arch/powerpc/include/asm/nohash/32/mmu-44x.h b/arch/powerpc/include/asm/nohash/32/mmu-44x.h
index 2d92a39d8f2e..c3d192194324 100644
--- a/arch/powerpc/include/asm/nohash/32/mmu-44x.h
+++ b/arch/powerpc/include/asm/nohash/32/mmu-44x.h
@@ -100,7 +100,7 @@
 #define PPC47x_TLB2_S_RW	(PPC47x_TLB2_SW | PPC47x_TLB2_SR)
 #define PPC47x_TLB2_IMG		(PPC47x_TLB2_I | PPC47x_TLB2_M | PPC47x_TLB2_G)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 extern unsigned int tlb_44x_hwater;
 extern unsigned int tlb_44x_index;
@@ -114,7 +114,7 @@ typedef struct {
 /* patch sites */
 extern s32 patch__tlb_44x_hwater_D, patch__tlb_44x_hwater_I;
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #ifndef CONFIG_PPC_EARLY_DEBUG_44x
 #define PPC44x_EARLY_TLBS	1
diff --git a/arch/powerpc/include/asm/nohash/32/mmu-8xx.h b/arch/powerpc/include/asm/nohash/32/mmu-8xx.h
index 2986f9ba40b8..f19115db8072 100644
--- a/arch/powerpc/include/asm/nohash/32/mmu-8xx.h
+++ b/arch/powerpc/include/asm/nohash/32/mmu-8xx.h
@@ -174,7 +174,7 @@
 #define MODULES_SIZE	(CONFIG_MODULES_SIZE * SZ_1M)
 #define MODULES_VADDR	(MODULES_END - MODULES_SIZE)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/mmdebug.h>
 #include <linux/sizes.h>
@@ -265,6 +265,6 @@ static inline int arch_vmap_pte_supported_shift(unsigned long size)
 extern s32 patch__itlbmiss_exit_1, patch__dtlbmiss_exit_1;
 extern s32 patch__itlbmiss_perf, patch__dtlbmiss_perf;
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* _ASM_POWERPC_MMU_8XX_H_ */
diff --git a/arch/powerpc/include/asm/nohash/32/pgtable.h b/arch/powerpc/include/asm/nohash/32/pgtable.h
index b481738c4bb5..2d71e4b7cd09 100644
--- a/arch/powerpc/include/asm/nohash/32/pgtable.h
+++ b/arch/powerpc/include/asm/nohash/32/pgtable.h
@@ -4,12 +4,12 @@
 
 #include <asm-generic/pgtable-nopmd.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <linux/sched.h>
 #include <linux/threads.h>
 #include <asm/mmu.h>			/* For sub-arch specific PPC_PIN_SIZE */
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #define PTE_INDEX_SIZE	PTE_SHIFT
 #define PMD_INDEX_SIZE	0
@@ -19,14 +19,14 @@
 #define PMD_CACHE_INDEX	PMD_INDEX_SIZE
 #define PUD_CACHE_INDEX	PUD_INDEX_SIZE
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #define PTE_TABLE_SIZE	(sizeof(pte_t) << PTE_INDEX_SIZE)
 #define PMD_TABLE_SIZE	0
 #define PUD_TABLE_SIZE	0
 #define PGD_TABLE_SIZE	(sizeof(pgd_t) << PGD_INDEX_SIZE)
 
 #define PMD_MASKED_BITS (PTE_TABLE_SIZE - 1)
-#endif	/* __ASSEMBLY__ */
+#endif	/* __ASSEMBLER__ */
 
 #define PTRS_PER_PTE	(1 << PTE_INDEX_SIZE)
 #define PTRS_PER_PGD	(1 << PGD_INDEX_SIZE)
@@ -149,7 +149,7 @@
 #define MAX_POSSIBLE_PHYSMEM_BITS 32
 #endif
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #define pmd_none(pmd)		(!pmd_val(pmd))
 #define	pmd_bad(pmd)		(pmd_val(pmd) & _PMD_BAD)
@@ -199,6 +199,6 @@ static inline void pmd_clear(pmd_t *pmdp)
 /* We borrow LSB 2 to store the exclusive marker in swap PTEs. */
 #define _PAGE_SWP_EXCLUSIVE	0x000004
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* __ASM_POWERPC_NOHASH_32_PGTABLE_H */
diff --git a/arch/powerpc/include/asm/nohash/32/pte-8xx.h b/arch/powerpc/include/asm/nohash/32/pte-8xx.h
index 54ebb91dbdcf..e2ea8ba9f8ca 100644
--- a/arch/powerpc/include/asm/nohash/32/pte-8xx.h
+++ b/arch/powerpc/include/asm/nohash/32/pte-8xx.h
@@ -83,7 +83,7 @@
 
 #include <asm/pgtable-masks.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 static inline pte_t pte_wrprotect(pte_t pte)
 {
 	return __pte(pte_val(pte) | _PAGE_RO);
diff --git a/arch/powerpc/include/asm/nohash/64/pgtable-4k.h b/arch/powerpc/include/asm/nohash/64/pgtable-4k.h
index 10f5cf444d72..fb6fa1d4e074 100644
--- a/arch/powerpc/include/asm/nohash/64/pgtable-4k.h
+++ b/arch/powerpc/include/asm/nohash/64/pgtable-4k.h
@@ -14,12 +14,12 @@
 #define PUD_INDEX_SIZE  9
 #define PGD_INDEX_SIZE  9
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #define PTE_TABLE_SIZE	(sizeof(pte_t) << PTE_INDEX_SIZE)
 #define PMD_TABLE_SIZE	(sizeof(pmd_t) << PMD_INDEX_SIZE)
 #define PUD_TABLE_SIZE	(sizeof(pud_t) << PUD_INDEX_SIZE)
 #define PGD_TABLE_SIZE	(sizeof(pgd_t) << PGD_INDEX_SIZE)
-#endif	/* __ASSEMBLY__ */
+#endif	/* __ASSEMBLER__ */
 
 #define PTRS_PER_PTE	(1 << PTE_INDEX_SIZE)
 #define PTRS_PER_PMD	(1 << PMD_INDEX_SIZE)
@@ -57,7 +57,7 @@
 #define p4d_bad(p4d)		(p4d_val(p4d) == 0)
 #define p4d_present(p4d)	(p4d_val(p4d) != 0)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 static inline pud_t *p4d_pgtable(p4d_t p4d)
 {
@@ -80,7 +80,7 @@ static inline p4d_t pte_p4d(pte_t pte)
 }
 extern struct page *p4d_page(p4d_t p4d);
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #define pud_ERROR(e) \
 	pr_err("%s:%d: bad pud %08lx.\n", __FILE__, __LINE__, pud_val(e))
diff --git a/arch/powerpc/include/asm/nohash/64/pgtable.h b/arch/powerpc/include/asm/nohash/64/pgtable.h
index 2202c78730e8..2deb955b7bc8 100644
--- a/arch/powerpc/include/asm/nohash/64/pgtable.h
+++ b/arch/powerpc/include/asm/nohash/64/pgtable.h
@@ -77,7 +77,7 @@
 
 #define H_PAGE_4K_PFN 0
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 /* pte_clear moved to later in this file */
 
 #define PMD_BAD_BITS		(PTE_TABLE_SIZE-1)
@@ -209,6 +209,6 @@ void __patch_exception(int exc, unsigned long addr);
 	__patch_exception((exc), (unsigned long)&name); \
 } while (0)
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_POWERPC_NOHASH_64_PGTABLE_H */
diff --git a/arch/powerpc/include/asm/nohash/kup-booke.h b/arch/powerpc/include/asm/nohash/kup-booke.h
index 0c7c3258134c..d6bbb6d78bbe 100644
--- a/arch/powerpc/include/asm/nohash/kup-booke.h
+++ b/arch/powerpc/include/asm/nohash/kup-booke.h
@@ -7,7 +7,7 @@
 
 #ifdef CONFIG_PPC_KUAP
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 .macro kuap_check_amr	gpr1, gpr2
 .endm
@@ -105,7 +105,7 @@ __bad_kuap_fault(struct pt_regs *regs, unsigned long address, bool is_write)
 	return !regs->kuap;
 }
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* CONFIG_PPC_KUAP */
 
diff --git a/arch/powerpc/include/asm/nohash/mmu-e500.h b/arch/powerpc/include/asm/nohash/mmu-e500.h
index b281d9eeaf1e..2fad5ff426a0 100644
--- a/arch/powerpc/include/asm/nohash/mmu-e500.h
+++ b/arch/powerpc/include/asm/nohash/mmu-e500.h
@@ -230,7 +230,7 @@
 #define MAS2_M_IF_NEEDED	0
 #endif
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <asm/bug.h>
 
 extern unsigned int tlbcam_index;
@@ -318,6 +318,6 @@ extern int book3e_htw_mode;
 #include <asm/percpu.h>
 DECLARE_PER_CPU(int, next_tlbcam_idx);
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* _ASM_POWERPC_MMU_BOOK3E_H_ */
diff --git a/arch/powerpc/include/asm/nohash/pgalloc.h b/arch/powerpc/include/asm/nohash/pgalloc.h
index bb5f3e8ea912..4ef780b291bc 100644
--- a/arch/powerpc/include/asm/nohash/pgalloc.h
+++ b/arch/powerpc/include/asm/nohash/pgalloc.h
@@ -22,7 +22,7 @@ static inline pgd_t *pgd_alloc(struct mm_struct *mm)
 	pgd_t *pgd = kmem_cache_alloc(PGT_CACHE(PGD_INDEX_SIZE),
 			pgtable_gfp_flags(mm, GFP_KERNEL));
 
-#if defined(CONFIG_PPC_8xx) || defined(CONFIG_PPC_BOOK3S_603)
+#ifdef CONFIG_PPC_8xx
 	memcpy(pgd + USER_PTRS_PER_PGD, swapper_pg_dir + USER_PTRS_PER_PGD,
 	       (MAX_PTRS_PER_PGD - USER_PTRS_PER_PGD) * sizeof(pgd_t));
 #endif
diff --git a/arch/powerpc/include/asm/nohash/pgtable.h b/arch/powerpc/include/asm/nohash/pgtable.h
index 7d6b9e5b286e..5af168b7f292 100644
--- a/arch/powerpc/include/asm/nohash/pgtable.h
+++ b/arch/powerpc/include/asm/nohash/pgtable.h
@@ -2,7 +2,7 @@
 #ifndef _ASM_POWERPC_NOHASH_PGTABLE_H
 #define _ASM_POWERPC_NOHASH_PGTABLE_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 static inline pte_basic_t pte_update(struct mm_struct *mm, unsigned long addr, pte_t *p,
 				     unsigned long clr, unsigned long set, int huge);
 #endif
@@ -27,7 +27,7 @@ static inline pte_basic_t pte_update(struct mm_struct *mm, unsigned long addr, p
 #define PAGE_KERNEL_RO	__pgprot(_PAGE_BASE | _PAGE_KERNEL_RO)
 #define PAGE_KERNEL_ROX	__pgprot(_PAGE_BASE | _PAGE_KERNEL_ROX)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 extern int icache_44x_need_flush;
 
@@ -373,5 +373,5 @@ static inline void __set_pte_at(struct mm_struct *mm, unsigned long addr,
 int map_kernel_page(unsigned long va, phys_addr_t pa, pgprot_t prot);
 void unmap_kernel_page(unsigned long va);
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif
diff --git a/arch/powerpc/include/asm/nohash/pte-e500.h b/arch/powerpc/include/asm/nohash/pte-e500.h
index cb78392494da..b61efc3ee904 100644
--- a/arch/powerpc/include/asm/nohash/pte-e500.h
+++ b/arch/powerpc/include/asm/nohash/pte-e500.h
@@ -86,7 +86,7 @@
 
 #include <asm/pgtable-masks.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 static inline pte_t pte_mkexec(pte_t pte)
 {
 	return __pte((pte_val(pte) & ~_PAGE_BAP_SX) | _PAGE_BAP_UX);
@@ -134,7 +134,7 @@ static inline unsigned long pud_leaf_size(pud_t pud)
 
 #endif
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* __KERNEL__ */
 #endif /*  _ASM_POWERPC_NOHASH_PTE_E500_H */
diff --git a/arch/powerpc/include/asm/opal-api.h b/arch/powerpc/include/asm/opal-api.h
index 8c9d4b26bf57..d3eaa3425797 100644
--- a/arch/powerpc/include/asm/opal-api.h
+++ b/arch/powerpc/include/asm/opal-api.h
@@ -246,7 +246,7 @@
 #define OPAL_CONFIG_IDLE_UNDO		0
 #define OPAL_CONFIG_IDLE_APPLY		1
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /* Other enums */
 enum OpalFreezeState {
@@ -1183,6 +1183,6 @@ struct opal_mpipl_fadump {
 	struct	opal_mpipl_region region[];
 } __packed;
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* __OPAL_API_H */
diff --git a/arch/powerpc/include/asm/opal.h b/arch/powerpc/include/asm/opal.h
index af304e6cb486..0a398265ba04 100644
--- a/arch/powerpc/include/asm/opal.h
+++ b/arch/powerpc/include/asm/opal.h
@@ -10,7 +10,7 @@
 
 #include <asm/opal-api.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/notifier.h>
 
@@ -390,6 +390,6 @@ void opal_powercap_init(void);
 void opal_psr_init(void);
 void opal_sensor_groups_init(void);
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_POWERPC_OPAL_H */
diff --git a/arch/powerpc/include/asm/page.h b/arch/powerpc/include/asm/page.h
index af9a2628d1df..b28fbb1d57eb 100644
--- a/arch/powerpc/include/asm/page.h
+++ b/arch/powerpc/include/asm/page.h
@@ -6,7 +6,7 @@
  * Copyright (C) 2001,2005 IBM Corporation.
  */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <linux/types.h>
 #include <linux/kernel.h>
 #include <linux/bug.h>
@@ -23,7 +23,7 @@
  */
 #include <vdso/page.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #ifndef CONFIG_HUGETLB_PAGE
 #define HPAGE_SHIFT PAGE_SHIFT
 #elif defined(CONFIG_PPC_BOOK3S_64)
@@ -75,7 +75,7 @@ extern unsigned int hpage_shift;
 #define LOAD_OFFSET	ASM_CONST((CONFIG_KERNEL_START-CONFIG_PHYSICAL_START))
 
 #if defined(CONFIG_NONSTATIC_KERNEL)
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 extern phys_addr_t memstart_addr;
 extern phys_addr_t kernstart_addr;
@@ -84,7 +84,7 @@ extern phys_addr_t kernstart_addr;
 extern long long virt_phys_offset;
 #endif
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #define PHYSICAL_START	kernstart_addr
 
 #else	/* !CONFIG_NONSTATIC_KERNEL */
@@ -216,7 +216,7 @@ extern long long virt_phys_offset;
 #endif
 #endif
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 static inline unsigned long virt_to_pfn(const void *kaddr)
 {
 	return __pa(kaddr) >> PAGE_SHIFT;
@@ -261,7 +261,7 @@ static inline const void *pfn_to_kaddr(unsigned long pfn)
 #define is_kernel_addr(x)	((x) >= TASK_SIZE)
 #endif
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #ifdef CONFIG_PPC_BOOK3S_64
 #include <asm/pgtable-be-types.h>
@@ -290,6 +290,6 @@ static inline unsigned long kaslr_offset(void)
 }
 
 #include <asm-generic/memory_model.h>
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_POWERPC_PAGE_H */
diff --git a/arch/powerpc/include/asm/page_32.h b/arch/powerpc/include/asm/page_32.h
index b9ac9e3a771c..25482405a811 100644
--- a/arch/powerpc/include/asm/page_32.h
+++ b/arch/powerpc/include/asm/page_32.h
@@ -19,7 +19,7 @@
 #define PTE_SHIFT	(PAGE_SHIFT - PTE_T_LOG2)	/* full page */
 #endif
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 /*
  * The basic type of a PTE - 64 bits for those CPUs with > 32 bit
  * physical addressing.
@@ -53,6 +53,6 @@ extern void copy_page(void *to, void *from);
 #define PGD_T_LOG2	(__builtin_ffs(sizeof(pgd_t)) - 1)
 #define PTE_T_LOG2	(__builtin_ffs(sizeof(pte_t)) - 1)
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_POWERPC_PAGE_32_H */
diff --git a/arch/powerpc/include/asm/page_64.h b/arch/powerpc/include/asm/page_64.h
index 79a9b7c6a132..0f564a06bf68 100644
--- a/arch/powerpc/include/asm/page_64.h
+++ b/arch/powerpc/include/asm/page_64.h
@@ -35,7 +35,7 @@
 #define ESID_MASK_1T		0xffffff0000000000UL
 #define GET_ESID_1T(x)		(((x) >> SID_SHIFT_1T) & SID_MASK_1T)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <asm/cache.h>
 
 typedef unsigned long pte_basic_t;
@@ -82,7 +82,7 @@ extern void copy_page(void *to, void *from);
 /* Log 2 of page table size */
 extern u64 ppc64_pft_size;
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #define VM_DATA_DEFAULT_FLAGS \
 	(is_32bit_task() ? \
diff --git a/arch/powerpc/include/asm/papr-sysparm.h b/arch/powerpc/include/asm/papr-sysparm.h
index c3cd5b131033..a3b5a0d05db6 100644
--- a/arch/powerpc/include/asm/papr-sysparm.h
+++ b/arch/powerpc/include/asm/papr-sysparm.h
@@ -21,6 +21,7 @@ typedef struct {
 #define PAPR_SYSPARM_COOP_MEM_OVERCOMMIT_ATTRS     mk_papr_sysparm(44)
 #define PAPR_SYSPARM_TLB_BLOCK_INVALIDATE_ATTRS    mk_papr_sysparm(50)
 #define PAPR_SYSPARM_LPAR_NAME                     mk_papr_sysparm(55)
+#define PAPR_SYSPARM_HVPIPE_ENABLE                 mk_papr_sysparm(64)
 
 /**
  * struct papr_sysparm_buf - RTAS work area layout for system parameter functions.
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h
index 2aa3a091ef20..1dae53130782 100644
--- a/arch/powerpc/include/asm/pci-bridge.h
+++ b/arch/powerpc/include/asm/pci-bridge.h
@@ -133,8 +133,6 @@ struct pci_controller {
 
 	/* IRQ domain hierarchy */
 	struct irq_domain	*dev_domain;
-	struct irq_domain	*msi_domain;
-	struct fwnode_handle	*fwnode;
 
 	/* iommu_ops support */
 	struct iommu_device	iommu;
diff --git a/arch/powerpc/include/asm/pgtable.h b/arch/powerpc/include/asm/pgtable.h
index 93d77ad5a92f..17fd7ff6e535 100644
--- a/arch/powerpc/include/asm/pgtable.h
+++ b/arch/powerpc/include/asm/pgtable.h
@@ -2,7 +2,7 @@
 #ifndef _ASM_POWERPC_PGTABLE_H
 #define _ASM_POWERPC_PGTABLE_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <linux/mmdebug.h>
 #include <linux/mmzone.h>
 #include <asm/processor.h>		/* For TASK_SIZE */
@@ -12,7 +12,7 @@
 
 struct mm_struct;
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #ifdef CONFIG_PPC_BOOK3S
 #include <asm/book3s/pgtable.h>
@@ -20,18 +20,6 @@ struct mm_struct;
 #include <asm/nohash/pgtable.h>
 #endif /* !CONFIG_PPC_BOOK3S */
 
-/*
- * Protection used for kernel text. We want the debuggers to be able to
- * set breakpoints anywhere, so don't write protect the kernel text
- * on platforms where such control is possible.
- */
-#if defined(CONFIG_KGDB) || defined(CONFIG_XMON) || defined(CONFIG_BDI_SWITCH) || \
-	defined(CONFIG_KPROBES) || defined(CONFIG_DYNAMIC_FTRACE)
-#define PAGE_KERNEL_TEXT	PAGE_KERNEL_X
-#else
-#define PAGE_KERNEL_TEXT	PAGE_KERNEL_ROX
-#endif
-
 /* Make modules code happy. We don't set RO yet */
 #define PAGE_KERNEL_EXEC	PAGE_KERNEL_X
 
@@ -39,7 +27,7 @@ struct mm_struct;
 #define PAGE_AGP		(PAGE_KERNEL_NC)
 #define HAVE_PAGE_AGP
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #define PFN_PTE_SHIFT		PTE_RPN_SHIFT
 
@@ -214,6 +202,6 @@ static inline bool arch_supports_memmap_on_memory(unsigned long vmemmap_size)
 
 #endif /* CONFIG_PPC64 */
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_POWERPC_PGTABLE_H */
diff --git a/arch/powerpc/include/asm/ppc-opcode.h b/arch/powerpc/include/asm/ppc-opcode.h
index 8053b24afc39..55ca49d18319 100644
--- a/arch/powerpc/include/asm/ppc-opcode.h
+++ b/arch/powerpc/include/asm/ppc-opcode.h
@@ -571,6 +571,7 @@
 					(0x54000001 | ___PPC_RA(d) | ___PPC_RS(a) | __PPC_SH(i) | __PPC_MB(mb) | __PPC_ME(me))
 #define PPC_RAW_RLWIMI(d, a, i, mb, me) (0x50000000 | ___PPC_RA(d) | ___PPC_RS(a) | __PPC_SH(i) | __PPC_MB(mb) | __PPC_ME(me))
 #define PPC_RAW_RLDICL(d, a, i, mb)     (0x78000000 | ___PPC_RA(d) | ___PPC_RS(a) | __PPC_SH64(i) | __PPC_MB64(mb))
+#define PPC_RAW_RLDICL_DOT(d, a, i, mb) (0x78000000 | ___PPC_RA(d) | ___PPC_RS(a) | __PPC_SH64(i) | __PPC_MB64(mb) | 0x1)
 #define PPC_RAW_RLDICR(d, a, i, me)     (0x78000004 | ___PPC_RA(d) | ___PPC_RS(a) | __PPC_SH64(i) | __PPC_ME64(me))
 
 /* slwi = rlwinm Rx, Ry, n, 0, 31-n */
diff --git a/arch/powerpc/include/asm/ppc_asm.h b/arch/powerpc/include/asm/ppc_asm.h
index b891910fce8a..46947c82a712 100644
--- a/arch/powerpc/include/asm/ppc_asm.h
+++ b/arch/powerpc/include/asm/ppc_asm.h
@@ -12,7 +12,7 @@
 #include <asm/feature-fixups.h>
 #include <asm/extable.h>
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 #define SZL			(BITS_PER_LONG/8)
 
@@ -868,7 +868,7 @@ END_FTR_SECTION_NESTED(CPU_FTR_CELL_TB_BUG, CPU_FTR_CELL_TB_BUG, 96)
 
 #endif /* !CONFIG_PPC_BOOK3E_64 */
 
-#endif /*  __ASSEMBLY__ */
+#endif /*  __ASSEMBLER__ */
 
 #define SOFT_MASK_TABLE(_start, _end)		\
 	stringify_in_c(.section __soft_mask_table,"a";)\
diff --git a/arch/powerpc/include/asm/processor.h b/arch/powerpc/include/asm/processor.h
index 6b94de17201c..f156bdb43e2b 100644
--- a/arch/powerpc/include/asm/processor.h
+++ b/arch/powerpc/include/asm/processor.h
@@ -29,14 +29,14 @@
 #ifdef CONFIG_PPC64
 /* Default SMT priority is set to 3. Use 11- 13bits to save priority. */
 #define PPR_PRIORITY 3
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #define DEFAULT_PPR (PPR_PRIORITY << 50)
 #else
 #define DEFAULT_PPR ((u64)PPR_PRIORITY << 50)
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif /* CONFIG_PPC64 */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <linux/types.h>
 #include <linux/thread_info.h>
 #include <asm/ptrace.h>
@@ -460,5 +460,5 @@ int enter_vmx_ops(void);
 void *exit_vmx_ops(void *dest);
 
 #endif /* __KERNEL__ */
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif /* _ASM_POWERPC_PROCESSOR_H */
diff --git a/arch/powerpc/include/asm/ptrace.h b/arch/powerpc/include/asm/ptrace.h
index 7b9350756875..94aa1de2b06e 100644
--- a/arch/powerpc/include/asm/ptrace.h
+++ b/arch/powerpc/include/asm/ptrace.h
@@ -24,7 +24,7 @@
 #include <asm/asm-const.h>
 #include <asm/reg.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 struct pt_regs
 {
 	union {
@@ -165,7 +165,7 @@ struct pt_regs
 #define STACK_INT_FRAME_SIZE	(KERNEL_REDZONE_SIZE + STACK_USER_INT_FRAME_SIZE)
 #define STACK_INT_FRAME_MARKER_LONGS	(STACK_INT_FRAME_MARKER/sizeof(long))
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <asm/paca.h>
 
 #ifdef CONFIG_SMP
@@ -414,7 +414,7 @@ static inline unsigned long regs_get_kernel_argument(struct pt_regs *regs, unsig
 	return 0;
 }
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #ifndef __powerpc64__
 /* We need PT_SOFTE defined at all time to avoid #ifdefs */
diff --git a/arch/powerpc/include/asm/reg.h b/arch/powerpc/include/asm/reg.h
index 0228c90bbcc7..3fe186635432 100644
--- a/arch/powerpc/include/asm/reg.h
+++ b/arch/powerpc/include/asm/reg.h
@@ -60,7 +60,7 @@
 #define MSR_RI_LG	1		/* Recoverable Exception */
 #define MSR_LE_LG	0 		/* Little Endian */
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #define __MASK(X)	(1<<(X))
 #else
 #define __MASK(X)	(1UL<<(X))
@@ -1358,7 +1358,7 @@
 #define PVR_ARCH_31_P11	0x0f000007
 
 /* Macros for setting and retrieving special purpose registers */
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #if defined(CONFIG_PPC64) || defined(__CHECKER__)
 typedef struct {
@@ -1450,6 +1450,6 @@ extern void scom970_write(unsigned int address, unsigned long value);
 struct pt_regs;
 
 extern void ppc_save_regs(struct pt_regs *regs);
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_REG_H */
diff --git a/arch/powerpc/include/asm/reg_booke.h b/arch/powerpc/include/asm/reg_booke.h
index 656bfaf91526..56f9d3b1de85 100644
--- a/arch/powerpc/include/asm/reg_booke.h
+++ b/arch/powerpc/include/asm/reg_booke.h
@@ -576,7 +576,7 @@
 
 #define TEN_THREAD(x)	(1 << (x))
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #define mftmr(rn)	({unsigned long rval; \
 			asm volatile(MFTMR(rn, %0) : "=r" (rval)); rval;})
 #define mttmr(rn, v)	asm volatile(MTTMR(rn, %0) : \
@@ -585,7 +585,7 @@
 
 extern unsigned long global_dbcr0[];
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* __ASM_POWERPC_REG_BOOKE_H__ */
 #endif /* __KERNEL__ */
diff --git a/arch/powerpc/include/asm/reg_fsl_emb.h b/arch/powerpc/include/asm/reg_fsl_emb.h
index 9893d2001b68..ec459c3d9498 100644
--- a/arch/powerpc/include/asm/reg_fsl_emb.h
+++ b/arch/powerpc/include/asm/reg_fsl_emb.h
@@ -9,7 +9,7 @@
 
 #include <linux/stringify.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 /* Performance Monitor Registers */
 static __always_inline unsigned int mfpmr(unsigned int rn)
 {
@@ -32,7 +32,7 @@ static __always_inline void mtpmr(unsigned int rn, unsigned int val)
 	     ".machine pop;"
 	     : [val] "=r" (val) : [rn] "i" (rn));
 }
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 /* Freescale Book E Performance Monitor APU Registers */
 #define PMRN_PMC0	0x010	/* Performance Monitor Counter 0 */
diff --git a/arch/powerpc/include/asm/rtas.h b/arch/powerpc/include/asm/rtas.h
index 75fa0293c508..d046bbd5017d 100644
--- a/arch/powerpc/include/asm/rtas.h
+++ b/arch/powerpc/include/asm/rtas.h
@@ -68,9 +68,11 @@ enum rtas_function_index {
 	RTAS_FNIDX__IBM_READ_PCI_CONFIG,
 	RTAS_FNIDX__IBM_READ_SLOT_RESET_STATE,
 	RTAS_FNIDX__IBM_READ_SLOT_RESET_STATE2,
+	RTAS_FNIDX__IBM_RECEIVE_HVPIPE_MSG,
 	RTAS_FNIDX__IBM_REMOVE_PE_DMA_WINDOW,
 	RTAS_FNIDX__IBM_RESET_PE_DMA_WINDOW,
 	RTAS_FNIDX__IBM_SCAN_LOG_DUMP,
+	RTAS_FNIDX__IBM_SEND_HVPIPE_MSG,
 	RTAS_FNIDX__IBM_SET_DYNAMIC_INDICATOR,
 	RTAS_FNIDX__IBM_SET_EEH_OPTION,
 	RTAS_FNIDX__IBM_SET_SLOT_RESET,
@@ -163,9 +165,11 @@ typedef struct {
 #define RTAS_FN_IBM_READ_PCI_CONFIG               rtas_fn_handle(RTAS_FNIDX__IBM_READ_PCI_CONFIG)
 #define RTAS_FN_IBM_READ_SLOT_RESET_STATE         rtas_fn_handle(RTAS_FNIDX__IBM_READ_SLOT_RESET_STATE)
 #define RTAS_FN_IBM_READ_SLOT_RESET_STATE2        rtas_fn_handle(RTAS_FNIDX__IBM_READ_SLOT_RESET_STATE2)
+#define RTAS_FN_IBM_RECEIVE_HVPIPE_MSG		  rtas_fn_handle(RTAS_FNIDX__IBM_RECEIVE_HVPIPE_MSG)
 #define RTAS_FN_IBM_REMOVE_PE_DMA_WINDOW          rtas_fn_handle(RTAS_FNIDX__IBM_REMOVE_PE_DMA_WINDOW)
 #define RTAS_FN_IBM_RESET_PE_DMA_WINDOW           rtas_fn_handle(RTAS_FNIDX__IBM_RESET_PE_DMA_WINDOW)
 #define RTAS_FN_IBM_SCAN_LOG_DUMP                 rtas_fn_handle(RTAS_FNIDX__IBM_SCAN_LOG_DUMP)
+#define RTAS_FN_IBM_SEND_HVPIPE_MSG		  rtas_fn_handle(RTAS_FNIDX__IBM_SEND_HVPIPE_MSG)
 #define RTAS_FN_IBM_SET_DYNAMIC_INDICATOR         rtas_fn_handle(RTAS_FNIDX__IBM_SET_DYNAMIC_INDICATOR)
 #define RTAS_FN_IBM_SET_EEH_OPTION                rtas_fn_handle(RTAS_FNIDX__IBM_SET_EEH_OPTION)
 #define RTAS_FN_IBM_SET_SLOT_RESET                rtas_fn_handle(RTAS_FNIDX__IBM_SET_SLOT_RESET)
@@ -217,6 +221,7 @@ typedef struct {
 #define RTAS_HARDWARE_ERROR             -1 /* Hardware or other unspecified error. */
 #define RTAS_BUSY                       -2 /* Retry immediately. */
 #define RTAS_INVALID_PARAMETER          -3 /* Invalid indicator/domain/sensor etc. */
+#define	RTAS_FUNC_NOT_SUPPORTED		-5 /* Function not supported */
 #define RTAS_UNEXPECTED_STATE_CHANGE    -7 /* Seems limited to EEH and slot reset. */
 #define RTAS_EXTENDED_DELAY_MIN       9900 /* Retry after delaying for ~1ms. */
 #define RTAS_EXTENDED_DELAY_MAX       9905 /* Retry after delaying for ~100s. */
@@ -233,6 +238,7 @@ typedef struct {
 #define RTAS_EPOW_WARNING		0x40000000 /* set bit 1 */
 #define RTAS_HOTPLUG_EVENTS		0x10000000 /* set bit 3 */
 #define RTAS_IO_EVENTS			0x08000000 /* set bit 4 */
+#define RTAS_HVPIPE_MSG_EVENTS		0x04000000 /* set bit 5 */
 #define RTAS_EVENT_SCAN_ALL_EVENTS	0xffffffff
 
 /* RTAS event severity */
@@ -282,6 +288,7 @@ typedef struct {
 #define RTAS_TYPE_DEALLOC		0xE3
 #define RTAS_TYPE_DUMP			0xE4
 #define RTAS_TYPE_HOTPLUG		0xE5
+#define RTAS_TYPE_HVPIPE		0xE6
 /* I don't add PowerMGM events right now, this is a different topic */
 #define RTAS_TYPE_PMGM_POWER_SW_ON	0x60
 #define RTAS_TYPE_PMGM_POWER_SW_OFF	0x61
@@ -374,6 +381,7 @@ inline uint32_t rtas_ext_event_company_id(struct rtas_ext_event_log_v6 *ext_log)
 #define PSERIES_ELOG_SECT_ID_HMC_ID		(('H' << 8) | 'M')
 #define PSERIES_ELOG_SECT_ID_EPOW		(('E' << 8) | 'P')
 #define PSERIES_ELOG_SECT_ID_IO_EVENT		(('I' << 8) | 'E')
+#define PSERIES_ELOG_SECT_ID_HVPIPE_EVENT	(('P' << 8) | 'E')
 #define PSERIES_ELOG_SECT_ID_MANUFACT_INFO	(('M' << 8) | 'I')
 #define PSERIES_ELOG_SECT_ID_CALL_HOME		(('C' << 8) | 'H')
 #define PSERIES_ELOG_SECT_ID_USER_DEF		(('U' << 8) | 'D')
@@ -519,6 +527,7 @@ extern struct mutex rtas_ibm_get_indices_lock;
 extern struct mutex rtas_ibm_set_dynamic_indicator_lock;
 extern struct mutex rtas_ibm_get_dynamic_sensor_state_lock;
 extern struct mutex rtas_ibm_physical_attestation_lock;
+extern struct mutex rtas_ibm_send_hvpipe_msg_lock;
 
 #define GLOBAL_INTERRUPT_QUEUE 9005
 
diff --git a/arch/powerpc/include/asm/setup.h b/arch/powerpc/include/asm/setup.h
index eed74c1fb832..50a92b24628d 100644
--- a/arch/powerpc/include/asm/setup.h
+++ b/arch/powerpc/include/asm/setup.h
@@ -4,7 +4,7 @@
 
 #include <uapi/asm/setup.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 extern void ppc_printk_progress(char *s, unsigned short hex);
 
 extern unsigned long long memory_limit;
@@ -89,7 +89,7 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4,
 
 extern struct seq_buf ppc_hw_desc;
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif	/* _ASM_POWERPC_SETUP_H */
 
diff --git a/arch/powerpc/include/asm/smp.h b/arch/powerpc/include/asm/smp.h
index b77927ccb0ab..e41b9ea42122 100644
--- a/arch/powerpc/include/asm/smp.h
+++ b/arch/powerpc/include/asm/smp.h
@@ -18,7 +18,7 @@
 #include <linux/kernel.h>
 #include <linux/irqreturn.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #ifdef CONFIG_PPC64
 #include <asm/paca.h>
@@ -266,7 +266,7 @@ extern char __secondary_hold;
 extern unsigned int booting_thread_hwid;
 
 extern void __early_start(void);
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* __KERNEL__ */
 #endif /* _ASM_POWERPC_SMP_H) */
diff --git a/arch/powerpc/include/asm/spu_csa.h b/arch/powerpc/include/asm/spu_csa.h
index c33df961c045..1b3271a03392 100644
--- a/arch/powerpc/include/asm/spu_csa.h
+++ b/arch/powerpc/include/asm/spu_csa.h
@@ -43,7 +43,7 @@
 #define SPU_DECR_STATUS_RUNNING 0x1
 #define SPU_DECR_STATUS_WRAPPED 0x2
 
-#ifndef  __ASSEMBLY__
+#ifndef __ASSEMBLER__
 /**
  * spu_reg128 - generic 128-bit register definition.
  */
@@ -243,5 +243,5 @@ struct spu_state {
 
 #endif /* !__SPU__ */
 #endif /* __KERNEL__ */
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 #endif /* _SPU_CSA_H_ */
diff --git a/arch/powerpc/include/asm/synch.h b/arch/powerpc/include/asm/synch.h
index b0b4c64870d7..0d3ccb34adfb 100644
--- a/arch/powerpc/include/asm/synch.h
+++ b/arch/powerpc/include/asm/synch.h
@@ -7,7 +7,7 @@
 #include <asm/feature-fixups.h>
 #include <asm/ppc-opcode.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 extern unsigned int __start___lwsync_fixup, __stop___lwsync_fixup;
 extern void do_lwsync_fixups(unsigned long value, void *fixup_start,
 			     void *fixup_end);
@@ -40,7 +40,7 @@ static inline void ppc_after_tlbiel_barrier(void)
 	 */
 	asm volatile(ASM_FTR_IFSET(PPC_CP_ABORT, "", %0) : : "i" (CPU_FTR_ARCH_31) : "memory");
 }
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #if defined(__powerpc64__)
 #    define LWSYNC	lwsync
diff --git a/arch/powerpc/include/asm/thread_info.h b/arch/powerpc/include/asm/thread_info.h
index 2785c7462ebf..b0f200aba2b3 100644
--- a/arch/powerpc/include/asm/thread_info.h
+++ b/arch/powerpc/include/asm/thread_info.h
@@ -41,7 +41,7 @@
 
 #define THREAD_ALIGN		(1 << THREAD_ALIGN_SHIFT)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <linux/cache.h>
 #include <asm/processor.h>
 #include <asm/accounting.h>
@@ -89,7 +89,7 @@ extern int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src
 void arch_setup_new_exec(void);
 #define arch_setup_new_exec arch_setup_new_exec
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 /*
  * thread information flag bit numbers
@@ -162,7 +162,7 @@ void arch_setup_new_exec(void);
 #define _TLF_LAZY_MMU		(1 << TLF_LAZY_MMU)
 #define _TLF_RUNLATCH		(1 << TLF_RUNLATCH)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 static inline void clear_thread_local_flags(unsigned int flags)
 {
@@ -233,7 +233,7 @@ static inline int arch_within_stack_frames(const void * const stack,
 extern void *emergency_ctx[];
 #endif
 
-#endif	/* !__ASSEMBLY__ */
+#endif	/* !__ASSEMBLER__ */
 
 #endif /* __KERNEL__ */
 
diff --git a/arch/powerpc/include/asm/time.h b/arch/powerpc/include/asm/time.h
index f8885586efaf..7991ab1d4cb8 100644
--- a/arch/powerpc/include/asm/time.h
+++ b/arch/powerpc/include/asm/time.h
@@ -29,6 +29,10 @@ extern u64 decrementer_max;
 
 extern void generic_calibrate_decr(void);
 
+#ifdef CONFIG_PPC_SPLPAR
+extern u64 get_boot_tb(void);
+#endif
+
 /* Some sane defaults: 125 MHz timebase, 1GHz processor */
 extern unsigned long ppc_proc_freq;
 #define DEFAULT_PROC_FREQ	(DEFAULT_TB_FREQ * 8)
diff --git a/arch/powerpc/include/asm/tm.h b/arch/powerpc/include/asm/tm.h
index e94f6db5e367..d700affba448 100644
--- a/arch/powerpc/include/asm/tm.h
+++ b/arch/powerpc/include/asm/tm.h
@@ -8,7 +8,7 @@
 
 #include <uapi/asm/tm.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 extern void tm_reclaim(struct thread_struct *thread,
 		       uint8_t cause);
@@ -19,4 +19,4 @@ extern void tm_restore_sprs(struct thread_struct *thread);
 
 extern bool tm_suspend_disabled;
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
diff --git a/arch/powerpc/include/asm/topology.h b/arch/powerpc/include/asm/topology.h
index da15b5efe807..f19ca44512d1 100644
--- a/arch/powerpc/include/asm/topology.h
+++ b/arch/powerpc/include/asm/topology.h
@@ -131,6 +131,8 @@ static inline int cpu_to_coregroup_id(int cpu)
 #ifdef CONFIG_SMP
 #include <asm/cputable.h>
 
+struct cpumask *cpu_coregroup_mask(int cpu);
+
 #ifdef CONFIG_PPC64
 #include <asm/smp.h>
 
diff --git a/arch/powerpc/include/asm/types.h b/arch/powerpc/include/asm/types.h
index 93157a661dcc..55d7ba6d910b 100644
--- a/arch/powerpc/include/asm/types.h
+++ b/arch/powerpc/include/asm/types.h
@@ -11,10 +11,10 @@
 
 #include <uapi/asm/types.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 typedef __vector128 vector128;
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_POWERPC_TYPES_H */
diff --git a/arch/powerpc/include/asm/unistd.h b/arch/powerpc/include/asm/unistd.h
index 027ef94a12fb..b873fbb6d712 100644
--- a/arch/powerpc/include/asm/unistd.h
+++ b/arch/powerpc/include/asm/unistd.h
@@ -9,7 +9,7 @@
 
 #define NR_syscalls	__NR_syscalls
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/types.h>
 #include <linux/compiler.h>
@@ -52,5 +52,5 @@
 #define __ARCH_WANT_SYS_VFORK
 #define __ARCH_WANT_SYS_CLONE
 
-#endif		/* __ASSEMBLY__ */
+#endif		/* __ASSEMBLER__ */
 #endif /* _ASM_POWERPC_UNISTD_H_ */
diff --git a/arch/powerpc/include/asm/vdso.h b/arch/powerpc/include/asm/vdso.h
index 1ca23fbfe087..07af32576072 100644
--- a/arch/powerpc/include/asm/vdso.h
+++ b/arch/powerpc/include/asm/vdso.h
@@ -5,7 +5,7 @@
 #define VDSO_VERSION_STRING	LINUX_2.6.15
 #define __VDSO_PAGES		4
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #ifdef CONFIG_PPC64
 #include <generated/vdso64-offsets.h>
@@ -21,7 +21,7 @@
 
 int vdso_getcpu_init(void);
 
-#else /* __ASSEMBLY__ */
+#else /* __ASSEMBLER__ */
 
 #ifdef __VDSO64__
 #define V_FUNCTION_BEGIN(name)		\
@@ -49,6 +49,6 @@ int vdso_getcpu_init(void);
 
 #endif /* __VDSO32__ */
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_POWERPC_VDSO_H */
diff --git a/arch/powerpc/include/asm/vdso/getrandom.h b/arch/powerpc/include/asm/vdso/getrandom.h
index 067a5396aac6..4c24976061f4 100644
--- a/arch/powerpc/include/asm/vdso/getrandom.h
+++ b/arch/powerpc/include/asm/vdso/getrandom.h
@@ -5,7 +5,7 @@
 #ifndef _ASM_POWERPC_VDSO_GETRANDOM_H
 #define _ASM_POWERPC_VDSO_GETRANDOM_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/vdso_datapage.h>
 
@@ -62,6 +62,6 @@ static __always_inline const struct vdso_rng_data *__arch_get_vdso_u_rng_data(vo
 ssize_t __c_kernel_getrandom(void *buffer, size_t len, unsigned int flags, void *opaque_state,
 			     size_t opaque_len);
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* _ASM_POWERPC_VDSO_GETRANDOM_H */
diff --git a/arch/powerpc/include/asm/vdso/gettimeofday.h b/arch/powerpc/include/asm/vdso/gettimeofday.h
index 99c9d6f43fde..ab3df12c8d94 100644
--- a/arch/powerpc/include/asm/vdso/gettimeofday.h
+++ b/arch/powerpc/include/asm/vdso/gettimeofday.h
@@ -2,7 +2,7 @@
 #ifndef _ASM_POWERPC_VDSO_GETTIMEOFDAY_H
 #define _ASM_POWERPC_VDSO_GETTIMEOFDAY_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/vdso/timebase.h>
 #include <asm/barrier.h>
@@ -141,6 +141,6 @@ int __c_kernel_gettimeofday(struct __kernel_old_timeval *tv, struct timezone *tz
 __kernel_old_time_t __c_kernel_time(__kernel_old_time_t *time,
 				    const struct vdso_time_data *vd);
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_POWERPC_VDSO_GETTIMEOFDAY_H */
diff --git a/arch/powerpc/include/asm/vdso/processor.h b/arch/powerpc/include/asm/vdso/processor.h
index 80d13207c568..c1f3d7aaf3ee 100644
--- a/arch/powerpc/include/asm/vdso/processor.h
+++ b/arch/powerpc/include/asm/vdso/processor.h
@@ -2,7 +2,7 @@
 #ifndef _ASM_POWERPC_VDSO_PROCESSOR_H
 #define _ASM_POWERPC_VDSO_PROCESSOR_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /* Macros for adjusting thread priority (hardware multi-threading) */
 #ifdef CONFIG_PPC64
@@ -33,6 +33,6 @@
 #define cpu_relax()	barrier()
 #endif
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_POWERPC_VDSO_PROCESSOR_H */
diff --git a/arch/powerpc/include/asm/vdso/vsyscall.h b/arch/powerpc/include/asm/vdso/vsyscall.h
index c2c9ae1b22e7..bee18e8660a0 100644
--- a/arch/powerpc/include/asm/vdso/vsyscall.h
+++ b/arch/powerpc/include/asm/vdso/vsyscall.h
@@ -2,13 +2,13 @@
 #ifndef _ASM_POWERPC_VDSO_VSYSCALL_H
 #define _ASM_POWERPC_VDSO_VSYSCALL_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/vdso_datapage.h>
 
 /* The asm-generic header needs to be included after the definitions above */
 #include <asm-generic/vdso/vsyscall.h>
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* _ASM_POWERPC_VDSO_VSYSCALL_H */
diff --git a/arch/powerpc/include/asm/vdso_datapage.h b/arch/powerpc/include/asm/vdso_datapage.h
index 95d45a50355d..441264af0e36 100644
--- a/arch/powerpc/include/asm/vdso_datapage.h
+++ b/arch/powerpc/include/asm/vdso_datapage.h
@@ -9,11 +9,11 @@
  * 		      IBM Corp.
  */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <vdso/datapage.h>
 
-#else /* __ASSEMBLY__ */
+#else /* __ASSEMBLER__ */
 
 .macro get_datapage ptr symbol
 	bcl	20, 31, .+4
@@ -23,7 +23,7 @@
 	addi	\ptr, \ptr, (\symbol - 999b)@l
 .endm
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* __KERNEL__ */
 #endif /* _SYSTEMCFG_H */
diff --git a/arch/powerpc/include/asm/xive.h b/arch/powerpc/include/asm/xive.h
index 92930b0b5d0e..efb0f5effcc6 100644
--- a/arch/powerpc/include/asm/xive.h
+++ b/arch/powerpc/include/asm/xive.h
@@ -111,7 +111,6 @@ void xive_native_free_vp_block(u32 vp_base);
 int xive_native_populate_irq_data(u32 hw_irq,
 				  struct xive_irq_data *data);
 void xive_cleanup_irq_data(struct xive_irq_data *xd);
-void xive_irq_free_data(unsigned int virq);
 void xive_native_free_irq(u32 irq);
 int xive_native_configure_irq(u32 hw_irq, u32 target, u8 prio, u32 sw_irq);
 
diff --git a/arch/powerpc/include/uapi/asm/opal-prd.h b/arch/powerpc/include/uapi/asm/opal-prd.h
index 1869cf83a870..11abcf0192ca 100644
--- a/arch/powerpc/include/uapi/asm/opal-prd.h
+++ b/arch/powerpc/include/uapi/asm/opal-prd.h
@@ -40,7 +40,7 @@
 #define OPAL_PRD_SCOM_READ		_IOR('o', 0x02, struct opal_prd_scom)
 #define OPAL_PRD_SCOM_WRITE		_IOW('o', 0x03, struct opal_prd_scom)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 struct opal_prd_info {
 	__u64	version;
@@ -54,6 +54,6 @@ struct opal_prd_scom {
 	__s64	rc;
 };
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _UAPI_ASM_POWERPC_OPAL_PRD_H */
diff --git a/arch/powerpc/include/uapi/asm/papr-hvpipe.h b/arch/powerpc/include/uapi/asm/papr-hvpipe.h
new file mode 100644
index 000000000000..f8794139d06a
--- /dev/null
+++ b/arch/powerpc/include/uapi/asm/papr-hvpipe.h
@@ -0,0 +1,33 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+#ifndef _UAPI_PAPR_HVPIPE_H_
+#define _UAPI_PAPR_HVPIPE_H_
+
+#include <linux/types.h>
+#include <asm/ioctl.h>
+#include <asm/papr-miscdev.h>
+
+/*
+ * This header is included in payload between OS and the user
+ * space.
+ * flags: OS notifies the user space whether the hvpipe is
+ *        closed or the buffer has the payload.
+ */
+struct papr_hvpipe_hdr {
+	__u8 version;
+	__u8 reserved[3];
+	__u32 flags;
+	__u8 reserved2[40];
+};
+
+/*
+ * ioctl for /dev/papr-hvpipe
+ */
+#define PAPR_HVPIPE_IOC_CREATE_HANDLE	_IOW(PAPR_MISCDEV_IOC_ID, 9, __u32)
+
+/*
+ * hvpipe_hdr flags used for read()
+ */
+#define HVPIPE_MSG_AVAILABLE	0x01 /* Payload is available */
+#define HVPIPE_LOST_CONNECTION	0x02 /* Pipe connection is closed/unavailable */
+
+#endif /* _UAPI_PAPR_HVPIPE_H_ */
diff --git a/arch/powerpc/include/uapi/asm/ptrace.h b/arch/powerpc/include/uapi/asm/ptrace.h
index 7004cfea3f5f..01e630149d48 100644
--- a/arch/powerpc/include/uapi/asm/ptrace.h
+++ b/arch/powerpc/include/uapi/asm/ptrace.h
@@ -27,7 +27,7 @@
 
 #include <linux/types.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #ifdef __KERNEL__
 struct user_pt_regs
@@ -57,7 +57,7 @@ struct pt_regs
 	unsigned long result;		/* Result of a system call */
 };
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 
 /*
@@ -200,7 +200,7 @@ struct pt_regs
 #define PPC_PTRACE_SETHWDEBUG	0x88
 #define PPC_PTRACE_DELHWDEBUG	0x87
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 struct ppc_debug_info {
 	__u32 version;			/* Only version 1 exists to date */
@@ -212,7 +212,7 @@ struct ppc_debug_info {
 	__u64 features;
 };
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 /*
  * features will have bits indication whether there is support for:
@@ -224,7 +224,7 @@ struct ppc_debug_info {
 #define PPC_DEBUG_FEATURE_DATA_BP_DAWR		0x0000000000000010
 #define PPC_DEBUG_FEATURE_DATA_BP_ARCH_31	0x0000000000000020
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 struct ppc_hw_breakpoint {
 	__u32 version;		/* currently, version must be 1 */
@@ -236,7 +236,7 @@ struct ppc_hw_breakpoint {
 	__u64 condition_value;	/* contents of the DVC register */
 };
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 /*
  * Trigger Type
diff --git a/arch/powerpc/include/uapi/asm/types.h b/arch/powerpc/include/uapi/asm/types.h
index 327616fb70e4..9dbf55e38ea5 100644
--- a/arch/powerpc/include/uapi/asm/types.h
+++ b/arch/powerpc/include/uapi/asm/types.h
@@ -28,14 +28,14 @@
 # include <asm-generic/int-ll64.h>
 #endif
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 
 typedef struct {
 	__u32 u[4];
 } __attribute__((aligned(16))) __vector128;
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 
 #endif /* _UAPI_ASM_POWERPC_TYPES_H */
diff --git a/arch/powerpc/kernel/Makefile b/arch/powerpc/kernel/Makefile
index fb2b95267022..2f0a2e69c607 100644
--- a/arch/powerpc/kernel/Makefile
+++ b/arch/powerpc/kernel/Makefile
@@ -199,7 +199,9 @@ obj-$(CONFIG_ALTIVEC)		+= vector.o
 
 obj-$(CONFIG_PPC_OF_BOOT_TRAMPOLINE) += prom_init.o
 obj64-$(CONFIG_PPC_OF_BOOT_TRAMPOLINE) += prom_entry_64.o
-extra-$(CONFIG_PPC_OF_BOOT_TRAMPOLINE) += prom_init_check
+ifdef KBUILD_BUILTIN
+always-$(CONFIG_PPC_OF_BOOT_TRAMPOLINE) += prom_init_check
+endif
 
 obj-$(CONFIG_PPC64)		+= $(obj64-y)
 obj-$(CONFIG_PPC32)		+= $(obj32-y)
diff --git a/arch/powerpc/kernel/asm-offsets.c b/arch/powerpc/kernel/asm-offsets.c
index b3048f6d3822..a4bc80b30410 100644
--- a/arch/powerpc/kernel/asm-offsets.c
+++ b/arch/powerpc/kernel/asm-offsets.c
@@ -8,6 +8,7 @@
  * compile this file to assembler, and then extract the
  * #defines from the assembly-language output.
  */
+#define COMPILE_OFFSETS
 
 #include <linux/compat.h>
 #include <linux/signal.h>
diff --git a/arch/powerpc/kernel/head_8xx.S b/arch/powerpc/kernel/head_8xx.S
index 56c5ebe21b99..393e19ee1322 100644
--- a/arch/powerpc/kernel/head_8xx.S
+++ b/arch/powerpc/kernel/head_8xx.S
@@ -162,7 +162,7 @@ instruction_counter:
  * For the MPC8xx, this is a software tablewalk to load the instruction
  * TLB.  The task switch loads the M_TWB register with the pointer to the first
  * level table.
- * If we discover there is no second level table (value is zero) or if there
+ * If there is no second level table (value is zero) or if there
  * is an invalid pte, we load that into the TLB, which causes another fault
  * into the TLB Error interrupt where we can handle such problems.
  * We have to use the MD_xxx registers for the tablewalk because the
@@ -183,14 +183,11 @@ instruction_counter:
 	mtspr	SPRN_SPRG_SCRATCH2, r10
 	mtspr	SPRN_M_TW, r11
 
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
 	mfspr	r10, SPRN_SRR0	/* Get effective address of fault */
 	INVALIDATE_ADJACENT_PAGES_CPU15(r10, r11)
 	mtspr	SPRN_MD_EPN, r10
 	mfspr	r10, SPRN_M_TWB	/* Get level 1 table */
-	lwz	r11, (swapper_pg_dir-PAGE_OFFSET)@l(r10)	/* Get level 1 entry */
+	lwz	r11, 0(r10)	/* Get level 1 entry */
 	mtspr	SPRN_MD_TWC, r11
 	mfspr	r10, SPRN_MD_TWC
 	lwz	r10, 0(r10)	/* Get the pte */
@@ -228,12 +225,8 @@ instruction_counter:
 	mtspr	SPRN_SPRG_SCRATCH2, r10
 	mtspr	SPRN_M_TW, r11
 
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	mfspr	r10, SPRN_MD_EPN
 	mfspr	r10, SPRN_M_TWB	/* Get level 1 table */
-	lwz	r11, (swapper_pg_dir-PAGE_OFFSET)@l(r10)	/* Get level 1 entry */
+	lwz	r11, 0(r10)	/* Get level 1 entry */
 
 	mtspr	SPRN_MD_TWC, r11
 	mfspr	r10, SPRN_MD_TWC
@@ -375,7 +368,7 @@ FixupPGD:
 	mfspr	r10, SPRN_DAR
 	mtspr	SPRN_MD_EPN, r10
 	mfspr	r11, SPRN_M_TWB	/* Get level 1 table */
-	lwz	r10, (swapper_pg_dir - PAGE_OFFSET)@l(r11)	/* Get the level 1 entry */
+	lwz	r10, 0(r11)	/* Get the level 1 entry */
 	cmpwi	cr1, r10, 0
 	bne	cr1, 1f
 
@@ -384,7 +377,7 @@ FixupPGD:
 	lwz	r10, (swapper_pg_dir - PAGE_OFFSET)@l(r10)	/* Get the level 1 entry */
 	cmpwi	cr1, r10, 0
 	beq	cr1, 1f
-	stw	r10, (swapper_pg_dir - PAGE_OFFSET)@l(r11)	/* Set the level 1 entry */
+	stw	r10, 0(r11)	/* Set the level 1 entry */
 	mfspr	r10, SPRN_M_TW
 	mtcr	r10
 	mfspr	r10, SPRN_SPRG_SCRATCH0
@@ -412,9 +405,10 @@ FixupDAR:/* Entry point for dcbx workaround. */
 	tophys(r11, r10)
 	mfspr	r11, SPRN_M_TWB	/* Get level 1 table */
 	rlwinm	r11, r11, 0, 20, 31
-	oris	r11, r11, (swapper_pg_dir - PAGE_OFFSET)@ha
+	oris	r11, r11, (swapper_pg_dir - PAGE_OFFSET)@h
+	ori	r11, r11, (swapper_pg_dir - PAGE_OFFSET)@l
 3:
-	lwz	r11, (swapper_pg_dir-PAGE_OFFSET)@l(r11)	/* Get the level 1 entry */
+	lwz	r11, 0(r11)	/* Get the level 1 entry */
 	rlwinm	r11, r11, 0, ~_PMD_PAGE_8M
 	mtspr	SPRN_MD_TWC, r11
 	mfspr	r11, SPRN_MD_TWC
@@ -535,7 +529,8 @@ start_here:
 	li	r0,0
 	stwu	r0,THREAD_SIZE-STACK_FRAME_MIN_SIZE(r1)
 
-	lis	r6, swapper_pg_dir@ha
+	lis	r6, swapper_pg_dir@h
+	ori	r6, r6, swapper_pg_dir@l
 	tophys(r6,r6)
 	mtspr	SPRN_M_TWB, r6
 
diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h
index 0b5c1993809e..75471fb6fb10 100644
--- a/arch/powerpc/kernel/head_booke.h
+++ b/arch/powerpc/kernel/head_booke.h
@@ -7,7 +7,7 @@
 #include <asm/kvm_booke_hv_asm.h>
 #include <asm/thread_info.h>	/* for THREAD_SHIFT */
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 /*
  * Macros used for common Book-e exception handling
@@ -522,5 +522,5 @@ label:
 	bl	kernel_fp_unavailable_exception;			      \
 	b	interrupt_return
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif /* __HEAD_BOOKE_H__ */
diff --git a/arch/powerpc/kernel/kvm.c b/arch/powerpc/kernel/kvm.c
index 5b3c093611ba..7209d00a9c25 100644
--- a/arch/powerpc/kernel/kvm.c
+++ b/arch/powerpc/kernel/kvm.c
@@ -632,19 +632,19 @@ static void __init kvm_check_ins(u32 *inst, u32 features)
 #endif
 	}
 
-	switch (inst_no_rt & ~KVM_MASK_RB) {
 #ifdef CONFIG_PPC_BOOK3S_32
+	switch (inst_no_rt & ~KVM_MASK_RB) {
 	case KVM_INST_MTSRIN:
 		if (features & KVM_MAGIC_FEAT_SR) {
 			u32 inst_rb = _inst & KVM_MASK_RB;
 			kvm_patch_ins_mtsrin(inst, inst_rt, inst_rb);
 		}
 		break;
-#endif
 	}
+#endif
 
-	switch (_inst) {
 #ifdef CONFIG_BOOKE
+	switch (_inst) {
 	case KVM_INST_WRTEEI_0:
 		kvm_patch_ins_wrteei_0(inst);
 		break;
@@ -652,8 +652,8 @@ static void __init kvm_check_ins(u32 *inst, u32 features)
 	case KVM_INST_WRTEEI_1:
 		kvm_patch_ins_wrtee(inst, 0, 1);
 		break;
-#endif
 	}
+#endif
 }
 
 extern u32 kvm_template_start[];
diff --git a/arch/powerpc/kernel/module_64.c b/arch/powerpc/kernel/module_64.c
index 126bf3b06ab7..2a44bc8e2439 100644
--- a/arch/powerpc/kernel/module_64.c
+++ b/arch/powerpc/kernel/module_64.c
@@ -209,8 +209,7 @@ static unsigned long get_stubs_size(const Elf64_Ehdr *hdr,
 				    char *secstrings,
 				    struct module *me)
 {
-	/* One extra reloc so it's always 0-addr terminated */
-	unsigned long relocs = 1;
+	unsigned long relocs = 0;
 	unsigned i;
 
 	/* Every relocated section... */
@@ -705,7 +704,7 @@ static unsigned long stub_for_addr(const Elf64_Shdr *sechdrs,
 
 	/* Find this stub, or if that fails, the next avail. entry */
 	stubs = (void *)sechdrs[me->arch.stubs_section].sh_addr;
-	for (i = 0; stub_func_addr(stubs[i].funcdata); i++) {
+	for (i = 0; i < me->arch.stub_count; i++) {
 		if (WARN_ON(i >= num_stubs))
 			return 0;
 
@@ -716,6 +715,7 @@ static unsigned long stub_for_addr(const Elf64_Shdr *sechdrs,
 	if (!create_stub(sechdrs, &stubs[i], addr, me, name))
 		return 0;
 
+	me->arch.stub_count++;
 	return (unsigned long)&stubs[i];
 }
 
@@ -1118,29 +1118,19 @@ int module_trampoline_target(struct module *mod, unsigned long addr,
 static int setup_ftrace_ool_stubs(const Elf64_Shdr *sechdrs, unsigned long addr, struct module *me)
 {
 #ifdef CONFIG_PPC_FTRACE_OUT_OF_LINE
-	unsigned int i, total_stubs, num_stubs;
+	unsigned int total_stubs, num_stubs;
 	struct ppc64_stub_entry *stub;
 
 	total_stubs = sechdrs[me->arch.stubs_section].sh_size / sizeof(*stub);
 	num_stubs = roundup(me->arch.ool_stub_count * sizeof(struct ftrace_ool_stub),
 			    sizeof(struct ppc64_stub_entry)) / sizeof(struct ppc64_stub_entry);
 
-	/* Find the next available entry */
-	stub = (void *)sechdrs[me->arch.stubs_section].sh_addr;
-	for (i = 0; stub_func_addr(stub[i].funcdata); i++)
-		if (WARN_ON(i >= total_stubs))
-			return -1;
-
-	if (WARN_ON(i + num_stubs > total_stubs))
+	if (WARN_ON(me->arch.stub_count + num_stubs > total_stubs))
 		return -1;
 
-	stub += i;
-	me->arch.ool_stubs = (struct ftrace_ool_stub *)stub;
-
-	/* reserve stubs */
-	for (i = 0; i < num_stubs; i++)
-		if (patch_u32((void *)&stub->funcdata, PPC_RAW_NOP()))
-			return -1;
+	stub = (void *)sechdrs[me->arch.stubs_section].sh_addr;
+	me->arch.ool_stubs = (struct ftrace_ool_stub *)(stub + me->arch.stub_count);
+	me->arch.stub_count += num_stubs;
 #endif
 
 	return 0;
diff --git a/arch/powerpc/kernel/process.c b/arch/powerpc/kernel/process.c
index 855e09886503..eb23966ac0a9 100644
--- a/arch/powerpc/kernel/process.c
+++ b/arch/powerpc/kernel/process.c
@@ -1805,7 +1805,7 @@ int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 			f = ret_from_kernel_user_thread;
 		} else {
 			struct pt_regs *regs = current_pt_regs();
-			unsigned long clone_flags = args->flags;
+			u64 clone_flags = args->flags;
 			unsigned long usp = args->stack;
 
 			/* Copy registers */
diff --git a/arch/powerpc/kernel/prom_init_check.sh b/arch/powerpc/kernel/prom_init_check.sh
index 69623b9045d5..3090b97258ae 100644
--- a/arch/powerpc/kernel/prom_init_check.sh
+++ b/arch/powerpc/kernel/prom_init_check.sh
@@ -15,8 +15,8 @@
 
 has_renamed_memintrinsics()
 {
-	grep -q "^CONFIG_KASAN=y$" ${KCONFIG_CONFIG} && \
-		! grep -q "^CONFIG_CC_HAS_KASAN_MEMINTRINSIC_PREFIX=y" ${KCONFIG_CONFIG}
+	grep -q "^CONFIG_KASAN=y$" "${KCONFIG_CONFIG}" && \
+		! grep -q "^CONFIG_CC_HAS_KASAN_MEMINTRINSIC_PREFIX=y" "${KCONFIG_CONFIG}"
 }
 
 if has_renamed_memintrinsics
@@ -42,15 +42,15 @@ check_section()
 {
     file=$1
     section=$2
-    size=$(objdump -h -j $section $file 2>/dev/null | awk "\$2 == \"$section\" {print \$3}")
+    size=$(objdump -h -j "$section" "$file" 2>/dev/null | awk "\$2 == \"$section\" {print \$3}")
     size=${size:-0}
-    if [ $size -ne 0 ]; then
+    if [ "$size" -ne 0 ]; then
 	ERROR=1
 	echo "Error: Section $section not empty in prom_init.c" >&2
     fi
 }
 
-for UNDEF in $($NM -u $OBJ | awk '{print $2}')
+for UNDEF in $($NM -u "$OBJ" | awk '{print $2}')
 do
 	# On 64-bit nm gives us the function descriptors, which have
 	# a leading . on the name, so strip it off here.
@@ -87,8 +87,8 @@ do
 	fi
 done
 
-check_section $OBJ .data
-check_section $OBJ .bss
-check_section $OBJ .init.data
+check_section "$OBJ" .data
+check_section "$OBJ" .bss
+check_section "$OBJ" .init.data
 
 exit $ERROR
diff --git a/arch/powerpc/kernel/rtas.c b/arch/powerpc/kernel/rtas.c
index e61245c4468e..8d81c1e7a8db 100644
--- a/arch/powerpc/kernel/rtas.c
+++ b/arch/powerpc/kernel/rtas.c
@@ -98,6 +98,8 @@ DEFINE_MUTEX(rtas_ibm_get_vpd_lock);
 DEFINE_MUTEX(rtas_ibm_get_indices_lock);
 DEFINE_MUTEX(rtas_ibm_set_dynamic_indicator_lock);
 DEFINE_MUTEX(rtas_ibm_get_dynamic_sensor_state_lock);
+DEFINE_MUTEX(rtas_ibm_receive_hvpipe_msg_lock);
+DEFINE_MUTEX(rtas_ibm_send_hvpipe_msg_lock);
 
 static struct rtas_function rtas_function_table[] __ro_after_init = {
 	[RTAS_FNIDX__CHECK_EXCEPTION] = {
@@ -373,6 +375,17 @@ static struct rtas_function rtas_function_table[] __ro_after_init = {
 	[RTAS_FNIDX__IBM_READ_SLOT_RESET_STATE2] = {
 		.name = "ibm,read-slot-reset-state2",
 	},
+	[RTAS_FNIDX__IBM_RECEIVE_HVPIPE_MSG] {
+		.name = "ibm,receive-hvpipe-msg",
+		.filter = &(const struct rtas_filter) {
+			.buf_idx1 = 0, .size_idx1 = 1,
+			.buf_idx2 = -1, .size_idx2 = -1,
+		},
+		/*
+		 * PAPR+ v2.13 R1–7.3.32.1
+		 */
+		.lock = &rtas_ibm_receive_hvpipe_msg_lock,
+	},
 	[RTAS_FNIDX__IBM_REMOVE_PE_DMA_WINDOW] = {
 		.name = "ibm,remove-pe-dma-window",
 	},
@@ -391,6 +404,17 @@ static struct rtas_function rtas_function_table[] __ro_after_init = {
 			.buf_idx2 = -1, .size_idx2 = -1,
 		},
 	},
+	[RTAS_FNIDX__IBM_SEND_HVPIPE_MSG] {
+		.name = "ibm,send-hvpipe-msg",
+		.filter = &(const struct rtas_filter) {
+			.buf_idx1 = 1, .size_idx1 = -1,
+			.buf_idx2 = -1, .size_idx2 = -1,
+		},
+		/*
+		 * PAPR+ v2.13 R1–7.3.32.2
+		 */
+		.lock = &rtas_ibm_send_hvpipe_msg_lock,
+	},
 	[RTAS_FNIDX__IBM_SET_DYNAMIC_INDICATOR] = {
 		.name = "ibm,set-dynamic-indicator",
 		.filter = &(const struct rtas_filter) {
diff --git a/arch/powerpc/kernel/rtasd.c b/arch/powerpc/kernel/rtasd.c
index 9bba469239fc..6336ec9aedd0 100644
--- a/arch/powerpc/kernel/rtasd.c
+++ b/arch/powerpc/kernel/rtasd.c
@@ -89,6 +89,8 @@ static char *rtas_event_type(int type)
 			return "Platform Resource Reassignment Event";
 		case RTAS_TYPE_HOTPLUG:
 			return "Hotplug Event";
+		case RTAS_TYPE_HVPIPE:
+			return "Hypervisor Pipe Notification event";
 	}
 
 	return rtas_type[0];
diff --git a/arch/powerpc/kernel/setup_64.c b/arch/powerpc/kernel/setup_64.c
index 7284c8021eeb..8fd7cbf3bd04 100644
--- a/arch/powerpc/kernel/setup_64.c
+++ b/arch/powerpc/kernel/setup_64.c
@@ -141,10 +141,7 @@ void __init check_smt_enabled(void)
 			smt_enabled_at_boot = 0;
 		else {
 			int smt;
-			int rc;
-
-			rc = kstrtoint(smt_enabled_cmdline, 10, &smt);
-			if (!rc)
+			if (!kstrtoint(smt_enabled_cmdline, 10, &smt))
 				smt_enabled_at_boot =
 					min(threads_per_core, smt);
 		}
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index f59e4b9cc207..68edb66c2964 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -1028,19 +1028,19 @@ static int powerpc_shared_proc_flags(void)
  * We can't just pass cpu_l2_cache_mask() directly because
  * returns a non-const pointer and the compiler barfs on that.
  */
-static const struct cpumask *shared_cache_mask(int cpu)
+static const struct cpumask *tl_cache_mask(struct sched_domain_topology_level *tl, int cpu)
 {
 	return per_cpu(cpu_l2_cache_map, cpu);
 }
 
 #ifdef CONFIG_SCHED_SMT
-static const struct cpumask *smallcore_smt_mask(int cpu)
+static const struct cpumask *tl_smallcore_smt_mask(struct sched_domain_topology_level *tl, int cpu)
 {
 	return cpu_smallcore_mask(cpu);
 }
 #endif
 
-static struct cpumask *cpu_coregroup_mask(int cpu)
+struct cpumask *cpu_coregroup_mask(int cpu)
 {
 	return per_cpu(cpu_coregroup_map, cpu);
 }
@@ -1054,11 +1054,6 @@ static bool has_coregroup_support(void)
 	return coregroup_enabled;
 }
 
-static const struct cpumask *cpu_mc_mask(int cpu)
-{
-	return cpu_coregroup_mask(cpu);
-}
-
 static int __init init_big_cores(void)
 {
 	int cpu;
@@ -1448,7 +1443,7 @@ static bool update_mask_by_l2(int cpu, cpumask_var_t *mask)
 		return false;
 	}
 
-	cpumask_and(*mask, cpu_online_mask, cpu_cpu_mask(cpu));
+	cpumask_and(*mask, cpu_online_mask, cpu_node_mask(cpu));
 
 	/* Update l2-cache mask with all the CPUs that are part of submask */
 	or_cpumasks_related(cpu, cpu, submask_fn, cpu_l2_cache_mask);
@@ -1538,7 +1533,7 @@ static void update_coregroup_mask(int cpu, cpumask_var_t *mask)
 		return;
 	}
 
-	cpumask_and(*mask, cpu_online_mask, cpu_cpu_mask(cpu));
+	cpumask_and(*mask, cpu_online_mask, cpu_node_mask(cpu));
 
 	/* Update coregroup mask with all the CPUs that are part of submask */
 	or_cpumasks_related(cpu, cpu, submask_fn, cpu_coregroup_mask);
@@ -1601,7 +1596,7 @@ static void add_cpu_to_masks(int cpu)
 
 	/* If chip_id is -1; limit the cpu_core_mask to within PKG */
 	if (chip_id == -1)
-		cpumask_and(mask, mask, cpu_cpu_mask(cpu));
+		cpumask_and(mask, mask, cpu_node_mask(cpu));
 
 	for_each_cpu(i, mask) {
 		if (chip_id == cpu_to_chip_id(i)) {
@@ -1701,22 +1696,22 @@ static void __init build_sched_topology(void)
 	if (has_big_cores) {
 		pr_info("Big cores detected but using small core scheduling\n");
 		powerpc_topology[i++] =
-			SDTL_INIT(smallcore_smt_mask, powerpc_smt_flags, SMT);
+			SDTL_INIT(tl_smallcore_smt_mask, powerpc_smt_flags, SMT);
 	} else {
-		powerpc_topology[i++] = SDTL_INIT(cpu_smt_mask, powerpc_smt_flags, SMT);
+		powerpc_topology[i++] = SDTL_INIT(tl_smt_mask, powerpc_smt_flags, SMT);
 	}
 #endif
 	if (shared_caches) {
 		powerpc_topology[i++] =
-			SDTL_INIT(shared_cache_mask, powerpc_shared_cache_flags, CACHE);
+			SDTL_INIT(tl_cache_mask, powerpc_shared_cache_flags, CACHE);
 	}
 
 	if (has_coregroup_support()) {
 		powerpc_topology[i++] =
-			SDTL_INIT(cpu_mc_mask, powerpc_shared_proc_flags, MC);
+			SDTL_INIT(tl_mc_mask, powerpc_shared_proc_flags, MC);
 	}
 
-	powerpc_topology[i++] = SDTL_INIT(cpu_cpu_mask, powerpc_shared_proc_flags, PKG);
+	powerpc_topology[i++] = SDTL_INIT(tl_pkg_mask, powerpc_shared_proc_flags, PKG);
 
 	/* There must be one trailing NULL entry left.  */
 	BUG_ON(i >= ARRAY_SIZE(powerpc_topology) - 1);
diff --git a/arch/powerpc/kernel/time.c b/arch/powerpc/kernel/time.c
index 8224381c1dba..4bbeb8644d3d 100644
--- a/arch/powerpc/kernel/time.c
+++ b/arch/powerpc/kernel/time.c
@@ -137,7 +137,7 @@ EXPORT_SYMBOL_GPL(rtc_lock);
 
 static u64 tb_to_ns_scale __read_mostly;
 static unsigned tb_to_ns_shift __read_mostly;
-static u64 boot_tb __read_mostly;
+static u64 boot_tb __ro_after_init;
 
 extern struct timezone sys_tz;
 static long timezone_offset;
@@ -639,6 +639,12 @@ notrace unsigned long long sched_clock(void)
 	return mulhdu(get_tb() - boot_tb, tb_to_ns_scale) << tb_to_ns_shift;
 }
 
+#ifdef CONFIG_PPC_SPLPAR
+u64 get_boot_tb(void)
+{
+	return boot_tb;
+}
+#endif
 
 #ifdef CONFIG_PPC_PSERIES
 
diff --git a/arch/powerpc/kernel/trace/ftrace.c b/arch/powerpc/kernel/trace/ftrace.c
index 6dca92d5a6e8..841d077e2825 100644
--- a/arch/powerpc/kernel/trace/ftrace.c
+++ b/arch/powerpc/kernel/trace/ftrace.c
@@ -488,8 +488,10 @@ int ftrace_init_nop(struct module *mod, struct dyn_ftrace *rec)
 		return ret;
 
 	/* Set up out-of-line stub */
-	if (IS_ENABLED(CONFIG_PPC_FTRACE_OUT_OF_LINE))
-		return ftrace_init_ool_stub(mod, rec);
+	if (IS_ENABLED(CONFIG_PPC_FTRACE_OUT_OF_LINE)) {
+		ret = ftrace_init_ool_stub(mod, rec);
+		goto out;
+	}
 
 	/* Nop-out the ftrace location */
 	new = ppc_inst(PPC_RAW_NOP());
@@ -520,6 +522,10 @@ int ftrace_init_nop(struct module *mod, struct dyn_ftrace *rec)
 		return -EINVAL;
 	}
 
+out:
+	if (!ret)
+		ret = ftrace_rec_set_nop_ops(rec);
+
 	return ret;
 }
 
diff --git a/arch/powerpc/kernel/trace/ftrace_entry.S b/arch/powerpc/kernel/trace/ftrace_entry.S
index 3565c67fc638..6599fe3c6234 100644
--- a/arch/powerpc/kernel/trace/ftrace_entry.S
+++ b/arch/powerpc/kernel/trace/ftrace_entry.S
@@ -409,23 +409,31 @@ EXPORT_SYMBOL(_mcount)
 _GLOBAL(return_to_handler)
 	/* need to save return values */
 #ifdef CONFIG_PPC64
-	std	r4,  -32(r1)
-	std	r3,  -24(r1)
+	stdu	r1, -SWITCH_FRAME_SIZE(r1)
+	std	r4, GPR4(r1)
+	std	r3, GPR3(r1)
+	/* Save previous stack pointer (r1) */
+	addi	r3, r1, SWITCH_FRAME_SIZE
+	std	r3, GPR1(r1)
 	/* save TOC */
-	std	r2,  -16(r1)
-	std	r31, -8(r1)
+	std	r2,  24(r1)
+	std	r31, 32(r1)
 	mr	r31, r1
-	stdu	r1, -112(r1)
-
+	/* pass ftrace_regs/pt_regs to ftrace_return_to_handler */
+	addi	r3, r1, STACK_INT_FRAME_REGS
 	/*
 	 * We might be called from a module.
 	 * Switch to our TOC to run inside the core kernel.
 	 */
 	LOAD_PACA_TOC()
 #else
-	stwu	r1, -16(r1)
-	stw	r3, 8(r1)
-	stw	r4, 12(r1)
+	stwu	r1, -SWITCH_FRAME_SIZE(r1)
+	stw	r4, GPR4(r1)
+	stw	r3, GPR3(r1)
+	addi	r3, r1, SWITCH_FRAME_SIZE
+	stw	r3, GPR1(r1)
+	/* pass ftrace_regs/pt_regs to ftrace_return_to_handler */
+	addi	r3, r1, STACK_INT_FRAME_REGS
 #endif
 
 	bl	ftrace_return_to_handler
@@ -435,15 +443,15 @@ _GLOBAL(return_to_handler)
 	mtlr	r3
 
 #ifdef CONFIG_PPC64
-	ld	r1, 0(r1)
-	ld	r4,  -32(r1)
-	ld	r3,  -24(r1)
-	ld	r2,  -16(r1)
-	ld	r31, -8(r1)
+	ld	r4,  GPR4(r1)
+	ld	r3,  GPR3(r1)
+	ld	r2,  24(r1)
+	ld	r31, 32(r1)
+	ld	r1,  0(r1)
 #else
-	lwz	r3, 8(r1)
-	lwz	r4, 12(r1)
-	addi	r1, r1, 16
+	lwz	r3, GPR3(r1)
+	lwz	r4, GPR4(r1)
+	addi	r1, r1, SWITCH_FRAME_SIZE
 #endif
 
 	/* Jump back to real return address */
diff --git a/arch/powerpc/kernel/vdso.c b/arch/powerpc/kernel/vdso.c
index 219d67bcf747..ab7c4cc80943 100644
--- a/arch/powerpc/kernel/vdso.c
+++ b/arch/powerpc/kernel/vdso.c
@@ -21,6 +21,7 @@
 #include <vdso/datapage.h>
 
 #include <asm/syscall.h>
+#include <asm/syscalls.h>
 #include <asm/processor.h>
 #include <asm/mmu.h>
 #include <asm/mmu_context.h>
@@ -40,8 +41,6 @@ static_assert(__VDSO_PAGES == VDSO_NR_PAGES);
 extern char vdso32_start, vdso32_end;
 extern char vdso64_start, vdso64_end;
 
-long sys_ni_syscall(void);
-
 static int vdso_mremap(const struct vm_special_mapping *sm, struct vm_area_struct *new_vma,
 		       unsigned long text_size)
 {
diff --git a/arch/powerpc/kvm/powerpc.c b/arch/powerpc/kvm/powerpc.c
index 153587741864..2ba057171ebe 100644
--- a/arch/powerpc/kvm/powerpc.c
+++ b/arch/powerpc/kvm/powerpc.c
@@ -69,7 +69,7 @@ int kvm_arch_vcpu_should_kick(struct kvm_vcpu *vcpu)
 
 /*
  * Common checks before entering the guest world.  Call with interrupts
- * disabled.
+ * enabled.
  *
  * returns:
  *
diff --git a/arch/powerpc/lib/qspinlock.c b/arch/powerpc/lib/qspinlock.c
index bcc7e4dff8c3..95ab4cdf582e 100644
--- a/arch/powerpc/lib/qspinlock.c
+++ b/arch/powerpc/lib/qspinlock.c
@@ -9,6 +9,7 @@
 #include <linux/sched/clock.h>
 #include <asm/qspinlock.h>
 #include <asm/paravirt.h>
+#include <trace/events/lock.h>
 
 #define MAX_NODES	4
 
@@ -708,26 +709,26 @@ release:
 	qnodesp->count--;
 }
 
-void queued_spin_lock_slowpath(struct qspinlock *lock)
+void __lockfunc queued_spin_lock_slowpath(struct qspinlock *lock)
 {
+	trace_contention_begin(lock, LCB_F_SPIN);
 	/*
 	 * This looks funny, but it induces the compiler to inline both
 	 * sides of the branch rather than share code as when the condition
 	 * is passed as the paravirt argument to the functions.
 	 */
 	if (IS_ENABLED(CONFIG_PARAVIRT_SPINLOCKS) && is_shared_processor()) {
-		if (try_to_steal_lock(lock, true)) {
+		if (try_to_steal_lock(lock, true))
 			spec_barrier();
-			return;
-		}
-		queued_spin_lock_mcs_queue(lock, true);
+		else
+			queued_spin_lock_mcs_queue(lock, true);
 	} else {
-		if (try_to_steal_lock(lock, false)) {
+		if (try_to_steal_lock(lock, false))
 			spec_barrier();
-			return;
-		}
-		queued_spin_lock_mcs_queue(lock, false);
+		else
+			queued_spin_lock_mcs_queue(lock, false);
 	}
+	trace_contention_end(lock, 0);
 }
 EXPORT_SYMBOL(queued_spin_lock_slowpath);
 
diff --git a/arch/powerpc/mm/book3s32/mmu.c b/arch/powerpc/mm/book3s32/mmu.c
index be9c4106e22f..c42ecdf94e48 100644
--- a/arch/powerpc/mm/book3s32/mmu.c
+++ b/arch/powerpc/mm/book3s32/mmu.c
@@ -204,7 +204,7 @@ int mmu_mark_initmem_nx(void)
 
 	for (i = 0; i < nb - 1 && base < top;) {
 		size = bat_block_size(base, top);
-		setibat(i++, PAGE_OFFSET + base, base, size, PAGE_KERNEL_TEXT);
+		setibat(i++, PAGE_OFFSET + base, base, size, PAGE_KERNEL_X);
 		base += size;
 	}
 	if (base < top) {
@@ -215,7 +215,7 @@ int mmu_mark_initmem_nx(void)
 				pr_warn("Some RW data is getting mapped X. "
 					"Adjust CONFIG_DATA_SHIFT to avoid that.\n");
 		}
-		setibat(i++, PAGE_OFFSET + base, base, size, PAGE_KERNEL_TEXT);
+		setibat(i++, PAGE_OFFSET + base, base, size, PAGE_KERNEL_X);
 		base += size;
 	}
 	for (; i < nb; i++)
diff --git a/arch/powerpc/mm/nohash/mmu_context.c b/arch/powerpc/mm/nohash/mmu_context.c
index a1a4e697251a..28a96a10c907 100644
--- a/arch/powerpc/mm/nohash/mmu_context.c
+++ b/arch/powerpc/mm/nohash/mmu_context.c
@@ -203,15 +203,7 @@ static unsigned int steal_context_up(unsigned int id)
 static void set_context(unsigned long id, pgd_t *pgd)
 {
 	if (IS_ENABLED(CONFIG_PPC_8xx)) {
-		s16 offset = (s16)(__pa(swapper_pg_dir));
-
-		/*
-		 * Register M_TWB will contain base address of level 1 table minus the
-		 * lower part of the kernel PGDIR base address, so that all accesses to
-		 * level 1 table are done relative to lower part of kernel PGDIR base
-		 * address.
-		 */
-		mtspr(SPRN_M_TWB, __pa(pgd) - offset);
+		mtspr(SPRN_M_TWB, __pa(pgd));
 
 		/* Update context */
 		mtspr(SPRN_M_CASID, id - 1);
diff --git a/arch/powerpc/mm/pgtable_32.c b/arch/powerpc/mm/pgtable_32.c
index 15276068f657..0c9ef705803e 100644
--- a/arch/powerpc/mm/pgtable_32.c
+++ b/arch/powerpc/mm/pgtable_32.c
@@ -104,7 +104,7 @@ static void __init __mapin_ram_chunk(unsigned long offset, unsigned long top)
 	p = memstart_addr + s;
 	for (; s < top; s += PAGE_SIZE) {
 		ktext = core_kernel_text(v);
-		map_kernel_page(v, p, ktext ? PAGE_KERNEL_TEXT : PAGE_KERNEL);
+		map_kernel_page(v, p, ktext ? PAGE_KERNEL_X : PAGE_KERNEL);
 		v += PAGE_SIZE;
 		p += PAGE_SIZE;
 	}
diff --git a/arch/powerpc/net/bpf_jit.h b/arch/powerpc/net/bpf_jit.h
index 4c26912c2e3c..8334cd667bba 100644
--- a/arch/powerpc/net/bpf_jit.h
+++ b/arch/powerpc/net/bpf_jit.h
@@ -8,7 +8,7 @@
 #ifndef _BPF_JIT_H
 #define _BPF_JIT_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/types.h>
 #include <asm/ppc-opcode.h>
@@ -161,9 +161,11 @@ struct codegen_context {
 	unsigned int seen;
 	unsigned int idx;
 	unsigned int stack_size;
-	int b2p[MAX_BPF_JIT_REG + 2];
+	int b2p[MAX_BPF_JIT_REG + 3];
 	unsigned int exentry_idx;
 	unsigned int alt_exit_addr;
+	u64 arena_vm_start;
+	u64 user_vm_start;
 };
 
 #define bpf_to_ppc(r)	(ctx->b2p[r])
@@ -201,7 +203,7 @@ int bpf_jit_emit_exit_insn(u32 *image, struct codegen_context *ctx, int tmp_reg,
 
 int bpf_add_extable_entry(struct bpf_prog *fp, u32 *image, u32 *fimage, int pass,
 			  struct codegen_context *ctx, int insn_idx,
-			  int jmp_off, int dst_reg);
+			  int jmp_off, int dst_reg, u32 code);
 
 #endif
 
diff --git a/arch/powerpc/net/bpf_jit_comp.c b/arch/powerpc/net/bpf_jit_comp.c
index c0684733e9d6..88ad5ba7b87f 100644
--- a/arch/powerpc/net/bpf_jit_comp.c
+++ b/arch/powerpc/net/bpf_jit_comp.c
@@ -204,6 +204,8 @@ struct bpf_prog *bpf_int_jit_compile(struct bpf_prog *fp)
 
 	/* Make sure that the stack is quadword aligned. */
 	cgctx.stack_size = round_up(fp->aux->stack_depth, 16);
+	cgctx.arena_vm_start = bpf_arena_get_kern_vm_start(fp->aux->arena);
+	cgctx.user_vm_start = bpf_arena_get_user_vm_start(fp->aux->arena);
 
 	/* Scouting faux-generate pass 0 */
 	if (bpf_jit_build_body(fp, NULL, NULL, &cgctx, addrs, 0, false)) {
@@ -326,7 +328,7 @@ out:
  */
 int bpf_add_extable_entry(struct bpf_prog *fp, u32 *image, u32 *fimage, int pass,
 			  struct codegen_context *ctx, int insn_idx, int jmp_off,
-			  int dst_reg)
+			  int dst_reg, u32 code)
 {
 	off_t offset;
 	unsigned long pc;
@@ -355,6 +357,9 @@ int bpf_add_extable_entry(struct bpf_prog *fp, u32 *image, u32 *fimage, int pass
 		(ctx->exentry_idx * BPF_FIXUP_LEN * 4);
 
 	fixup[0] = PPC_RAW_LI(dst_reg, 0);
+	if (BPF_CLASS(code) == BPF_ST || BPF_CLASS(code) == BPF_STX)
+		fixup[0] = PPC_RAW_NOP();
+
 	if (IS_ENABLED(CONFIG_PPC32))
 		fixup[1] = PPC_RAW_LI(dst_reg - 1, 0); /* clear higher 32-bit register too */
 
@@ -435,11 +440,32 @@ bool bpf_jit_supports_kfunc_call(void)
 	return true;
 }
 
+bool bpf_jit_supports_arena(void)
+{
+	return IS_ENABLED(CONFIG_PPC64);
+}
+
 bool bpf_jit_supports_far_kfunc_call(void)
 {
 	return IS_ENABLED(CONFIG_PPC64);
 }
 
+bool bpf_jit_supports_insn(struct bpf_insn *insn, bool in_arena)
+{
+	if (!in_arena)
+		return true;
+	switch (insn->code) {
+	case BPF_STX | BPF_ATOMIC | BPF_H:
+	case BPF_STX | BPF_ATOMIC | BPF_B:
+	case BPF_STX | BPF_ATOMIC | BPF_W:
+	case BPF_STX | BPF_ATOMIC | BPF_DW:
+		if (bpf_atomic_is_load_store(insn))
+			return false;
+		return IS_ENABLED(CONFIG_PPC64);
+	}
+	return true;
+}
+
 void *arch_alloc_bpf_trampoline(unsigned int size)
 {
 	return bpf_prog_pack_alloc(size, bpf_jit_fill_ill_insns);
@@ -579,7 +605,7 @@ static void bpf_trampoline_setup_tail_call_cnt(u32 *image, struct codegen_contex
 {
 	if (IS_ENABLED(CONFIG_PPC64)) {
 		/* See bpf_jit_stack_tailcallcnt() */
-		int tailcallcnt_offset = 6 * 8;
+		int tailcallcnt_offset = 7 * 8;
 
 		EMIT(PPC_RAW_LL(_R3, _R1, func_frame_offset - tailcallcnt_offset));
 		EMIT(PPC_RAW_STL(_R3, _R1, -tailcallcnt_offset));
@@ -594,7 +620,7 @@ static void bpf_trampoline_restore_tail_call_cnt(u32 *image, struct codegen_cont
 {
 	if (IS_ENABLED(CONFIG_PPC64)) {
 		/* See bpf_jit_stack_tailcallcnt() */
-		int tailcallcnt_offset = 6 * 8;
+		int tailcallcnt_offset = 7 * 8;
 
 		EMIT(PPC_RAW_LL(_R3, _R1, -tailcallcnt_offset));
 		EMIT(PPC_RAW_STL(_R3, _R1, func_frame_offset - tailcallcnt_offset));
diff --git a/arch/powerpc/net/bpf_jit_comp32.c b/arch/powerpc/net/bpf_jit_comp32.c
index 0aace304dfe1..3087e744fb25 100644
--- a/arch/powerpc/net/bpf_jit_comp32.c
+++ b/arch/powerpc/net/bpf_jit_comp32.c
@@ -1087,7 +1087,7 @@ int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, u32 *fimage, struct code
 				}
 
 				ret = bpf_add_extable_entry(fp, image, fimage, pass, ctx, insn_idx,
-							    jmp_off, dst_reg);
+							    jmp_off, dst_reg, code);
 				if (ret)
 					return ret;
 			}
diff --git a/arch/powerpc/net/bpf_jit_comp64.c b/arch/powerpc/net/bpf_jit_comp64.c
index 025524378443..1fe37128c876 100644
--- a/arch/powerpc/net/bpf_jit_comp64.c
+++ b/arch/powerpc/net/bpf_jit_comp64.c
@@ -25,18 +25,18 @@
  * with our redzone usage.
  *
  *		[	prev sp		] <-------------
- *		[   nv gpr save area	] 5*8		|
+ *		[   nv gpr save area	] 6*8		|
  *		[    tail_call_cnt	] 8		|
- *		[    local_tmp_var	] 16		|
+ *		[    local_tmp_var	] 24		|
  * fp (r31) -->	[   ebpf stack space	] upto 512	|
  *		[     frame header	] 32/112	|
  * sp (r1) --->	[    stack pointer	] --------------
  */
 
 /* for gpr non volatile registers BPG_REG_6 to 10 */
-#define BPF_PPC_STACK_SAVE	(5*8)
+#define BPF_PPC_STACK_SAVE	(6*8)
 /* for bpf JIT code internal usage */
-#define BPF_PPC_STACK_LOCALS	24
+#define BPF_PPC_STACK_LOCALS	32
 /* stack frame excluding BPF stack, ensure this is quadword aligned */
 #define BPF_PPC_STACKFRAME	(STACK_FRAME_MIN_SIZE + \
 				 BPF_PPC_STACK_LOCALS + BPF_PPC_STACK_SAVE)
@@ -44,6 +44,7 @@
 /* BPF register usage */
 #define TMP_REG_1	(MAX_BPF_JIT_REG + 0)
 #define TMP_REG_2	(MAX_BPF_JIT_REG + 1)
+#define ARENA_VM_START  (MAX_BPF_JIT_REG + 2)
 
 /* BPF to ppc register mappings */
 void bpf_jit_init_reg_mapping(struct codegen_context *ctx)
@@ -67,10 +68,12 @@ void bpf_jit_init_reg_mapping(struct codegen_context *ctx)
 	ctx->b2p[BPF_REG_AX] = _R12;
 	ctx->b2p[TMP_REG_1] = _R9;
 	ctx->b2p[TMP_REG_2] = _R10;
+	/* non volatile register for kern_vm_start address */
+	ctx->b2p[ARENA_VM_START] = _R26;
 }
 
-/* PPC NVR range -- update this if we ever use NVRs below r27 */
-#define BPF_PPC_NVR_MIN		_R27
+/* PPC NVR range -- update this if we ever use NVRs below r26 */
+#define BPF_PPC_NVR_MIN		_R26
 
 static inline bool bpf_has_stack_frame(struct codegen_context *ctx)
 {
@@ -89,9 +92,9 @@ static inline bool bpf_has_stack_frame(struct codegen_context *ctx)
  *		[	prev sp		] <-------------
  *		[	  ...       	] 		|
  * sp (r1) --->	[    stack pointer	] --------------
- *		[   nv gpr save area	] 5*8
+ *		[   nv gpr save area	] 6*8
  *		[    tail_call_cnt	] 8
- *		[    local_tmp_var	] 16
+ *		[    local_tmp_var	] 24
  *		[   unused red zone	] 224
  */
 static int bpf_jit_stack_local(struct codegen_context *ctx)
@@ -99,12 +102,12 @@ static int bpf_jit_stack_local(struct codegen_context *ctx)
 	if (bpf_has_stack_frame(ctx))
 		return STACK_FRAME_MIN_SIZE + ctx->stack_size;
 	else
-		return -(BPF_PPC_STACK_SAVE + 24);
+		return -(BPF_PPC_STACK_SAVE + 32);
 }
 
 static int bpf_jit_stack_tailcallcnt(struct codegen_context *ctx)
 {
-	return bpf_jit_stack_local(ctx) + 16;
+	return bpf_jit_stack_local(ctx) + 24;
 }
 
 static int bpf_jit_stack_offsetof(struct codegen_context *ctx, int reg)
@@ -170,10 +173,17 @@ void bpf_jit_build_prologue(u32 *image, struct codegen_context *ctx)
 		if (bpf_is_seen_register(ctx, bpf_to_ppc(i)))
 			EMIT(PPC_RAW_STD(bpf_to_ppc(i), _R1, bpf_jit_stack_offsetof(ctx, bpf_to_ppc(i))));
 
+	if (ctx->arena_vm_start)
+		EMIT(PPC_RAW_STD(bpf_to_ppc(ARENA_VM_START), _R1,
+				 bpf_jit_stack_offsetof(ctx, bpf_to_ppc(ARENA_VM_START))));
+
 	/* Setup frame pointer to point to the bpf stack area */
 	if (bpf_is_seen_register(ctx, bpf_to_ppc(BPF_REG_FP)))
 		EMIT(PPC_RAW_ADDI(bpf_to_ppc(BPF_REG_FP), _R1,
 				STACK_FRAME_MIN_SIZE + ctx->stack_size));
+
+	if (ctx->arena_vm_start)
+		PPC_LI64(bpf_to_ppc(ARENA_VM_START), ctx->arena_vm_start);
 }
 
 static void bpf_jit_emit_common_epilogue(u32 *image, struct codegen_context *ctx)
@@ -185,6 +195,10 @@ static void bpf_jit_emit_common_epilogue(u32 *image, struct codegen_context *ctx
 		if (bpf_is_seen_register(ctx, bpf_to_ppc(i)))
 			EMIT(PPC_RAW_LD(bpf_to_ppc(i), _R1, bpf_jit_stack_offsetof(ctx, bpf_to_ppc(i))));
 
+	if (ctx->arena_vm_start)
+		EMIT(PPC_RAW_LD(bpf_to_ppc(ARENA_VM_START), _R1,
+				bpf_jit_stack_offsetof(ctx, bpf_to_ppc(ARENA_VM_START))));
+
 	/* Tear down our stack frame */
 	if (bpf_has_stack_frame(ctx)) {
 		EMIT(PPC_RAW_ADDI(_R1, _R1, BPF_PPC_STACKFRAME + ctx->stack_size));
@@ -396,11 +410,11 @@ void bpf_stf_barrier(void);
 asm (
 "		.global bpf_stf_barrier		;"
 "	bpf_stf_barrier:			;"
-"		std	21,-64(1)		;"
-"		std	22,-56(1)		;"
+"		std	21,-80(1)		;"
+"		std	22,-72(1)		;"
 "		sync				;"
-"		ld	21,-64(1)		;"
-"		ld	22,-56(1)		;"
+"		ld	21,-80(1)		;"
+"		ld	22,-72(1)		;"
 "		ori	31,31,0			;"
 "		.rept 14			;"
 "		b	1f			;"
@@ -409,6 +423,141 @@ asm (
 "		blr				;"
 );
 
+static int bpf_jit_emit_atomic_ops(u32 *image, struct codegen_context *ctx,
+				   const struct bpf_insn *insn, u32 *jmp_off,
+				   u32 *tmp_idx, u32 *addrp)
+{
+	u32 tmp1_reg = bpf_to_ppc(TMP_REG_1);
+	u32 tmp2_reg = bpf_to_ppc(TMP_REG_2);
+	u32 size = BPF_SIZE(insn->code);
+	u32 src_reg = bpf_to_ppc(insn->src_reg);
+	u32 dst_reg = bpf_to_ppc(insn->dst_reg);
+	s32 imm = insn->imm;
+
+	u32 save_reg = tmp2_reg;
+	u32 ret_reg = src_reg;
+	u32 fixup_idx;
+
+	/* Get offset into TMP_REG_1 */
+	EMIT(PPC_RAW_LI(tmp1_reg, insn->off));
+       /*
+	* Enforce full ordering for operations with BPF_FETCH by emitting a 'sync'
+	* before and after the operation.
+	*
+	* This is a requirement in the Linux Kernel Memory Model.
+	* See __cmpxchg_u64() in asm/cmpxchg.h as an example.
+	*/
+	if ((imm & BPF_FETCH) && IS_ENABLED(CONFIG_SMP))
+		EMIT(PPC_RAW_SYNC());
+
+	*tmp_idx = ctx->idx;
+
+	/* load value from memory into TMP_REG_2 */
+	if (size == BPF_DW)
+		EMIT(PPC_RAW_LDARX(tmp2_reg, tmp1_reg, dst_reg, 0));
+	else
+		EMIT(PPC_RAW_LWARX(tmp2_reg, tmp1_reg, dst_reg, 0));
+	/* Save old value in _R0 */
+	if (imm & BPF_FETCH)
+		EMIT(PPC_RAW_MR(_R0, tmp2_reg));
+
+	switch (imm) {
+	case BPF_ADD:
+	case BPF_ADD | BPF_FETCH:
+		EMIT(PPC_RAW_ADD(tmp2_reg, tmp2_reg, src_reg));
+		break;
+	case BPF_AND:
+	case BPF_AND | BPF_FETCH:
+		EMIT(PPC_RAW_AND(tmp2_reg, tmp2_reg, src_reg));
+		break;
+	case BPF_OR:
+	case BPF_OR | BPF_FETCH:
+		EMIT(PPC_RAW_OR(tmp2_reg, tmp2_reg, src_reg));
+		break;
+	case BPF_XOR:
+	case BPF_XOR | BPF_FETCH:
+		EMIT(PPC_RAW_XOR(tmp2_reg, tmp2_reg, src_reg));
+		break;
+	case BPF_CMPXCHG:
+	       /*
+		* Return old value in BPF_REG_0 for BPF_CMPXCHG &
+		* in src_reg for other cases.
+		*/
+		ret_reg = bpf_to_ppc(BPF_REG_0);
+
+		/* Compare with old value in BPF_R0 */
+		if (size == BPF_DW)
+			EMIT(PPC_RAW_CMPD(bpf_to_ppc(BPF_REG_0), tmp2_reg));
+		else
+			EMIT(PPC_RAW_CMPW(bpf_to_ppc(BPF_REG_0), tmp2_reg));
+		/* Don't set if different from old value */
+		PPC_BCC_SHORT(COND_NE, (ctx->idx + 3) * 4);
+		fallthrough;
+	case BPF_XCHG:
+		save_reg = src_reg;
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	/* store new value */
+	if (size == BPF_DW)
+		EMIT(PPC_RAW_STDCX(save_reg, tmp1_reg, dst_reg));
+	else
+		EMIT(PPC_RAW_STWCX(save_reg, tmp1_reg, dst_reg));
+	/* we're done if this succeeded */
+	PPC_BCC_SHORT(COND_NE, *tmp_idx * 4);
+	fixup_idx = ctx->idx;
+
+	if (imm & BPF_FETCH) {
+		/* Emit 'sync' to enforce full ordering */
+		if (IS_ENABLED(CONFIG_SMP))
+			EMIT(PPC_RAW_SYNC());
+		EMIT(PPC_RAW_MR(ret_reg, _R0));
+		/*
+		 * Skip unnecessary zero-extension for 32-bit cmpxchg.
+		 * For context, see commit 39491867ace5.
+		 */
+		if (size != BPF_DW && imm == BPF_CMPXCHG &&
+		    insn_is_zext(insn + 1))
+			*addrp = ctx->idx * 4;
+	}
+
+	*jmp_off = (fixup_idx - *tmp_idx) * 4;
+
+	return 0;
+}
+
+static int bpf_jit_emit_probe_mem_store(struct codegen_context *ctx, u32 src_reg, s16 off,
+					u32 code, u32 *image)
+{
+	u32 tmp1_reg = bpf_to_ppc(TMP_REG_1);
+	u32 tmp2_reg = bpf_to_ppc(TMP_REG_2);
+
+	switch (BPF_SIZE(code)) {
+	case BPF_B:
+		EMIT(PPC_RAW_STB(src_reg, tmp1_reg, off));
+		break;
+	case BPF_H:
+		EMIT(PPC_RAW_STH(src_reg, tmp1_reg, off));
+		break;
+	case BPF_W:
+		EMIT(PPC_RAW_STW(src_reg, tmp1_reg, off));
+		break;
+	case BPF_DW:
+		if (off % 4) {
+			EMIT(PPC_RAW_LI(tmp2_reg, off));
+			EMIT(PPC_RAW_STDX(src_reg, tmp1_reg, tmp2_reg));
+		} else {
+			EMIT(PPC_RAW_STD(src_reg, tmp1_reg, off));
+		}
+		break;
+	default:
+		return -EINVAL;
+	}
+	return 0;
+}
+
 static int emit_atomic_ld_st(const struct bpf_insn insn, struct codegen_context *ctx, u32 *image)
 {
 	u32 code = insn.code;
@@ -494,7 +643,6 @@ int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, u32 *fimage, struct code
 		u32 size = BPF_SIZE(code);
 		u32 tmp1_reg = bpf_to_ppc(TMP_REG_1);
 		u32 tmp2_reg = bpf_to_ppc(TMP_REG_2);
-		u32 save_reg, ret_reg;
 		s16 off = insn[i].off;
 		s32 imm = insn[i].imm;
 		bool func_addr_fixed;
@@ -502,6 +650,7 @@ int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, u32 *fimage, struct code
 		u64 imm64;
 		u32 true_cond;
 		u32 tmp_idx;
+		u32 jmp_off;
 
 		/*
 		 * addrs[] maps a BPF bytecode address into a real offset from
@@ -768,6 +917,16 @@ int bpf_jit_build_body(struct bpf_prog *fp, u32 *image, u32 *fimage, struct code
 		 */
 		case BPF_ALU | BPF_MOV | BPF_X: /* (u32) dst = src */
 		case BPF_ALU64 | BPF_MOV | BPF_X: /* dst = src */
+
+			if (insn_is_cast_user(&insn[i])) {
+				EMIT(PPC_RAW_RLDICL_DOT(tmp1_reg, src_reg, 0, 32));
+				PPC_LI64(dst_reg, (ctx->user_vm_start & 0xffffffff00000000UL));
+				PPC_BCC_SHORT(COND_EQ, (ctx->idx + 2) * 4);
+				EMIT(PPC_RAW_OR(tmp1_reg, dst_reg, tmp1_reg));
+				EMIT(PPC_RAW_MR(dst_reg, tmp1_reg));
+				break;
+			}
+
 			if (imm == 1) {
 				/* special mov32 for zext */
 				EMIT(PPC_RAW_RLWINM(dst_reg, dst_reg, 0, 0, 31));
@@ -960,6 +1119,76 @@ emit_clear:
 			}
 			break;
 
+		case BPF_STX | BPF_PROBE_MEM32 | BPF_B:
+		case BPF_STX | BPF_PROBE_MEM32 | BPF_H:
+		case BPF_STX | BPF_PROBE_MEM32 | BPF_W:
+		case BPF_STX | BPF_PROBE_MEM32 | BPF_DW:
+
+			EMIT(PPC_RAW_ADD(tmp1_reg, dst_reg, bpf_to_ppc(ARENA_VM_START)));
+
+			ret = bpf_jit_emit_probe_mem_store(ctx, src_reg, off, code, image);
+			if (ret)
+				return ret;
+
+			ret = bpf_add_extable_entry(fp, image, fimage, pass, ctx,
+						    ctx->idx - 1, 4, -1, code);
+			if (ret)
+				return ret;
+
+			break;
+
+		case BPF_ST | BPF_PROBE_MEM32 | BPF_B:
+		case BPF_ST | BPF_PROBE_MEM32 | BPF_H:
+		case BPF_ST | BPF_PROBE_MEM32 | BPF_W:
+		case BPF_ST | BPF_PROBE_MEM32 | BPF_DW:
+
+			EMIT(PPC_RAW_ADD(tmp1_reg, dst_reg, bpf_to_ppc(ARENA_VM_START)));
+
+			if (BPF_SIZE(code) == BPF_W || BPF_SIZE(code) == BPF_DW) {
+				PPC_LI32(tmp2_reg, imm);
+				src_reg = tmp2_reg;
+			} else {
+				EMIT(PPC_RAW_LI(tmp2_reg, imm));
+				src_reg = tmp2_reg;
+			}
+
+			ret = bpf_jit_emit_probe_mem_store(ctx, src_reg, off, code, image);
+			if (ret)
+				return ret;
+
+			ret = bpf_add_extable_entry(fp, image, fimage, pass, ctx,
+						    ctx->idx - 1, 4, -1, code);
+			if (ret)
+				return ret;
+
+			break;
+
+		/*
+		 * BPF_STX PROBE_ATOMIC (arena atomic ops)
+		 */
+		case BPF_STX | BPF_PROBE_ATOMIC | BPF_W:
+		case BPF_STX | BPF_PROBE_ATOMIC | BPF_DW:
+			EMIT(PPC_RAW_ADD(dst_reg, dst_reg, bpf_to_ppc(ARENA_VM_START)));
+			ret = bpf_jit_emit_atomic_ops(image, ctx, &insn[i],
+						      &jmp_off, &tmp_idx, &addrs[i + 1]);
+			if (ret) {
+				if (ret == -EOPNOTSUPP) {
+					pr_err_ratelimited(
+						"eBPF filter atomic op code %02x (@%d) unsupported\n",
+						code, i);
+				}
+				return ret;
+			}
+			/* LDARX/LWARX should land here on exception. */
+			ret = bpf_add_extable_entry(fp, image, fimage, pass, ctx,
+						    tmp_idx, jmp_off, dst_reg, code);
+			if (ret)
+				return ret;
+
+			/* Retrieve the dst_reg */
+			EMIT(PPC_RAW_SUB(dst_reg, dst_reg, bpf_to_ppc(ARENA_VM_START)));
+			break;
+
 		/*
 		 * BPF_STX ATOMIC (atomic ops)
 		 */
@@ -982,93 +1211,15 @@ emit_clear:
 				return -EOPNOTSUPP;
 			}
 
-			save_reg = tmp2_reg;
-			ret_reg = src_reg;
-
-			/* Get offset into TMP_REG_1 */
-			EMIT(PPC_RAW_LI(tmp1_reg, off));
-			/*
-			 * Enforce full ordering for operations with BPF_FETCH by emitting a 'sync'
-			 * before and after the operation.
-			 *
-			 * This is a requirement in the Linux Kernel Memory Model.
-			 * See __cmpxchg_u64() in asm/cmpxchg.h as an example.
-			 */
-			if ((imm & BPF_FETCH) && IS_ENABLED(CONFIG_SMP))
-				EMIT(PPC_RAW_SYNC());
-			tmp_idx = ctx->idx * 4;
-			/* load value from memory into TMP_REG_2 */
-			if (size == BPF_DW)
-				EMIT(PPC_RAW_LDARX(tmp2_reg, tmp1_reg, dst_reg, 0));
-			else
-				EMIT(PPC_RAW_LWARX(tmp2_reg, tmp1_reg, dst_reg, 0));
-
-			/* Save old value in _R0 */
-			if (imm & BPF_FETCH)
-				EMIT(PPC_RAW_MR(_R0, tmp2_reg));
-
-			switch (imm) {
-			case BPF_ADD:
-			case BPF_ADD | BPF_FETCH:
-				EMIT(PPC_RAW_ADD(tmp2_reg, tmp2_reg, src_reg));
-				break;
-			case BPF_AND:
-			case BPF_AND | BPF_FETCH:
-				EMIT(PPC_RAW_AND(tmp2_reg, tmp2_reg, src_reg));
-				break;
-			case BPF_OR:
-			case BPF_OR | BPF_FETCH:
-				EMIT(PPC_RAW_OR(tmp2_reg, tmp2_reg, src_reg));
-				break;
-			case BPF_XOR:
-			case BPF_XOR | BPF_FETCH:
-				EMIT(PPC_RAW_XOR(tmp2_reg, tmp2_reg, src_reg));
-				break;
-			case BPF_CMPXCHG:
-				/*
-				 * Return old value in BPF_REG_0 for BPF_CMPXCHG &
-				 * in src_reg for other cases.
-				 */
-				ret_reg = bpf_to_ppc(BPF_REG_0);
-
-				/* Compare with old value in BPF_R0 */
-				if (size == BPF_DW)
-					EMIT(PPC_RAW_CMPD(bpf_to_ppc(BPF_REG_0), tmp2_reg));
-				else
-					EMIT(PPC_RAW_CMPW(bpf_to_ppc(BPF_REG_0), tmp2_reg));
-				/* Don't set if different from old value */
-				PPC_BCC_SHORT(COND_NE, (ctx->idx + 3) * 4);
-				fallthrough;
-			case BPF_XCHG:
-				save_reg = src_reg;
-				break;
-			default:
-				pr_err_ratelimited(
-					"eBPF filter atomic op code %02x (@%d) unsupported\n",
-					code, i);
-				return -EOPNOTSUPP;
-			}
-
-			/* store new value */
-			if (size == BPF_DW)
-				EMIT(PPC_RAW_STDCX(save_reg, tmp1_reg, dst_reg));
-			else
-				EMIT(PPC_RAW_STWCX(save_reg, tmp1_reg, dst_reg));
-			/* we're done if this succeeded */
-			PPC_BCC_SHORT(COND_NE, tmp_idx);
-
-			if (imm & BPF_FETCH) {
-				/* Emit 'sync' to enforce full ordering */
-				if (IS_ENABLED(CONFIG_SMP))
-					EMIT(PPC_RAW_SYNC());
-				EMIT(PPC_RAW_MR(ret_reg, _R0));
-				/*
-				 * Skip unnecessary zero-extension for 32-bit cmpxchg.
-				 * For context, see commit 39491867ace5.
-				 */
-				if (size != BPF_DW && imm == BPF_CMPXCHG &&
-				    insn_is_zext(&insn[i + 1]))
-					addrs[++i] = ctx->idx * 4;
+			ret = bpf_jit_emit_atomic_ops(image, ctx, &insn[i],
+						      &jmp_off, &tmp_idx, &addrs[i + 1]);
+			if (ret) {
+				if (ret == -EOPNOTSUPP) {
+					pr_err_ratelimited(
+						"eBPF filter atomic op code %02x (@%d) unsupported\n",
+						code, i);
+				}
+				return ret;
 			}
 			break;
 
@@ -1112,9 +1263,10 @@ emit_clear:
 				 * Check if 'off' is word aligned for BPF_DW, because
 				 * we might generate two instructions.
 				 */
-				if ((BPF_SIZE(code) == BPF_DW ||
-				    (BPF_SIZE(code) == BPF_B && BPF_MODE(code) == BPF_PROBE_MEMSX)) &&
-						(off & 3))
+				if ((BPF_SIZE(code) == BPF_DW && (off & 3)) ||
+				    (BPF_SIZE(code) == BPF_B &&
+				     BPF_MODE(code) == BPF_PROBE_MEMSX) ||
+				    (BPF_SIZE(code) == BPF_B && BPF_MODE(code) == BPF_MEMSX))
 					PPC_JMP((ctx->idx + 3) * 4);
 				else
 					PPC_JMP((ctx->idx + 2) * 4);
@@ -1160,12 +1312,49 @@ emit_clear:
 
 			if (BPF_MODE(code) == BPF_PROBE_MEM) {
 				ret = bpf_add_extable_entry(fp, image, fimage, pass, ctx,
-							    ctx->idx - 1, 4, dst_reg);
+							    ctx->idx - 1, 4, dst_reg, code);
 				if (ret)
 					return ret;
 			}
 			break;
 
+		/* dst = *(u64 *)(ul) (src + ARENA_VM_START + off) */
+		case BPF_LDX | BPF_PROBE_MEM32 | BPF_B:
+		case BPF_LDX | BPF_PROBE_MEM32 | BPF_H:
+		case BPF_LDX | BPF_PROBE_MEM32 | BPF_W:
+		case BPF_LDX | BPF_PROBE_MEM32 | BPF_DW:
+
+			EMIT(PPC_RAW_ADD(tmp1_reg, src_reg, bpf_to_ppc(ARENA_VM_START)));
+
+			switch (size) {
+			case BPF_B:
+				EMIT(PPC_RAW_LBZ(dst_reg, tmp1_reg, off));
+				break;
+			case BPF_H:
+				EMIT(PPC_RAW_LHZ(dst_reg, tmp1_reg, off));
+				break;
+			case BPF_W:
+				EMIT(PPC_RAW_LWZ(dst_reg, tmp1_reg, off));
+				break;
+			case BPF_DW:
+				if (off % 4) {
+					EMIT(PPC_RAW_LI(tmp2_reg, off));
+					EMIT(PPC_RAW_LDX(dst_reg, tmp1_reg, tmp2_reg));
+				} else {
+					EMIT(PPC_RAW_LD(dst_reg, tmp1_reg, off));
+				}
+				break;
+			}
+
+			if (size != BPF_DW && insn_is_zext(&insn[i + 1]))
+				addrs[++i] = ctx->idx * 4;
+
+			ret = bpf_add_extable_entry(fp, image, fimage, pass, ctx,
+						    ctx->idx - 1, 4, dst_reg, code);
+			if (ret)
+				return ret;
+			break;
+
 		/*
 		 * Doubleword load
 		 * 16 byte instruction that uses two 'struct bpf_insn'
diff --git a/arch/powerpc/perf/Makefile b/arch/powerpc/perf/Makefile
index 7f53fcb7495a..78dd7e25219e 100644
--- a/arch/powerpc/perf/Makefile
+++ b/arch/powerpc/perf/Makefile
@@ -14,7 +14,7 @@ obj-$(CONFIG_PPC_POWERNV)	+= imc-pmu.o
 obj-$(CONFIG_FSL_EMB_PERF_EVENT) += core-fsl-emb.o
 obj-$(CONFIG_FSL_EMB_PERF_EVENT_E500) += e500-pmu.o e6500-pmu.o
 
-obj-$(CONFIG_HV_PERF_CTRS) += hv-24x7.o hv-gpci.o hv-common.o
+obj-$(CONFIG_HV_PERF_CTRS) += hv-24x7.o hv-gpci.o hv-common.o vpa-dtl.o
 
 obj-$(CONFIG_VPA_PMU) += vpa-pmu.o
 
diff --git a/arch/powerpc/perf/vpa-dtl.c b/arch/powerpc/perf/vpa-dtl.c
new file mode 100644
index 000000000000..3c1d1c28deb9
--- /dev/null
+++ b/arch/powerpc/perf/vpa-dtl.c
@@ -0,0 +1,596 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Perf interface to expose Dispatch Trace Log counters.
+ *
+ * Copyright (C) 2024 Kajol Jain, IBM Corporation
+ */
+
+#ifdef CONFIG_PPC_SPLPAR
+#define pr_fmt(fmt) "vpa_dtl: " fmt
+
+#include <asm/dtl.h>
+#include <linux/perf_event.h>
+#include <asm/plpar_wrappers.h>
+#include <linux/vmalloc.h>
+
+#define EVENT(_name, _code)     enum{_name = _code}
+
+/*
+ * Based on Power Architecture Platform Reference(PAPR) documentation,
+ * Table 14.14. Per Virtual Processor Area, below Dispatch Trace Log(DTL)
+ * Enable Mask used to get corresponding virtual processor dispatch
+ * to preempt traces:
+ *   DTL_CEDE(0x1): Trace voluntary (OS initiated) virtual
+ *   processor waits
+ *   DTL_PREEMPT(0x2): Trace time slice preempts
+ *   DTL_FAULT(0x4): Trace virtual partition memory page
+ faults.
+ *   DTL_ALL(0x7): Trace all (DTL_CEDE | DTL_PREEMPT | DTL_FAULT)
+ *
+ * Event codes based on Dispatch Trace Log Enable Mask.
+ */
+EVENT(DTL_CEDE,         0x1);
+EVENT(DTL_PREEMPT,      0x2);
+EVENT(DTL_FAULT,        0x4);
+EVENT(DTL_ALL,          0x7);
+
+GENERIC_EVENT_ATTR(dtl_cede, DTL_CEDE);
+GENERIC_EVENT_ATTR(dtl_preempt, DTL_PREEMPT);
+GENERIC_EVENT_ATTR(dtl_fault, DTL_FAULT);
+GENERIC_EVENT_ATTR(dtl_all, DTL_ALL);
+
+PMU_FORMAT_ATTR(event, "config:0-7");
+
+static struct attribute *events_attr[] = {
+	GENERIC_EVENT_PTR(DTL_CEDE),
+	GENERIC_EVENT_PTR(DTL_PREEMPT),
+	GENERIC_EVENT_PTR(DTL_FAULT),
+	GENERIC_EVENT_PTR(DTL_ALL),
+	NULL
+};
+
+static struct attribute_group event_group = {
+	.name = "events",
+	.attrs = events_attr,
+};
+
+static struct attribute *format_attrs[] = {
+	&format_attr_event.attr,
+	NULL,
+};
+
+static const struct attribute_group format_group = {
+	.name = "format",
+	.attrs = format_attrs,
+};
+
+static const struct attribute_group *attr_groups[] = {
+	&format_group,
+	&event_group,
+	NULL,
+};
+
+struct vpa_dtl {
+	struct dtl_entry	*buf;
+	u64			last_idx;
+};
+
+struct vpa_pmu_ctx {
+	struct perf_output_handle handle;
+};
+
+struct vpa_pmu_buf {
+	int     nr_pages;
+	bool    snapshot;
+	u64     *base;
+	u64     size;
+	u64     head;
+	u64	head_size;
+	/* boot timebase and frequency needs to be saved only at once */
+	int	boottb_freq_saved;
+	u64	threshold;
+	bool	full;
+};
+
+/*
+ * To corelate each DTL entry with other events across CPU's,
+ * we need to map timebase from "struct dtl_entry" which phyp
+ * provides with boot timebase. This also needs timebase frequency.
+ * Formula is: ((timbase from DTL entry - boot time) / frequency)
+ *
+ * To match with size of "struct dtl_entry" to ease post processing,
+ * padded 24 bytes to the structure.
+ */
+struct boottb_freq {
+	u64	boot_tb;
+	u64	tb_freq;
+	u64	timebase;
+	u64	padded[3];
+};
+
+static DEFINE_PER_CPU(struct vpa_pmu_ctx, vpa_pmu_ctx);
+static DEFINE_PER_CPU(struct vpa_dtl, vpa_dtl_cpu);
+
+/* variable to capture reference count for the active dtl threads */
+static int dtl_global_refc;
+static spinlock_t dtl_global_lock = __SPIN_LOCK_UNLOCKED(dtl_global_lock);
+
+/*
+ * Capture DTL data in AUX buffer
+ */
+static void vpa_dtl_capture_aux(long *n_entries, struct vpa_pmu_buf *buf,
+		struct vpa_dtl *dtl, int index)
+{
+	struct dtl_entry *aux_copy_buf = (struct dtl_entry *)buf->base;
+
+	/*
+	 * check if there is enough space to contain the
+	 * DTL data. If not, save the data for available
+	 * memory and set full to true.
+	 */
+	if (buf->head + *n_entries >= buf->threshold) {
+		*n_entries = buf->threshold - buf->head;
+		buf->full = 1;
+	}
+
+	/*
+	 * Copy to AUX buffer from per-thread address
+	 */
+	memcpy(aux_copy_buf + buf->head, &dtl->buf[index], *n_entries * sizeof(struct dtl_entry));
+
+	if (buf->full) {
+		/*
+		 * Set head of private aux to zero when buffer is full
+		 * so that next data will be copied to beginning of the
+		 * buffer
+		 */
+		buf->head = 0;
+		return;
+	}
+
+	buf->head += *n_entries;
+
+	return;
+}
+
+/*
+ * Function to dump the dispatch trace log buffer data to the
+ * perf data.
+ *
+ * perf_aux_output_begin: This function is called before writing
+ * to AUX area. This returns the pointer to aux area private structure,
+ * ie "struct vpa_pmu_buf" here which is set in setup_aux() function.
+ * The function obtains the output handle (used in perf_aux_output_end).
+ * when capture completes in vpa_dtl_capture_aux(), call perf_aux_output_end()
+ * to commit the recorded data.
+ *
+ * perf_aux_output_end: This function commits data by adjusting the
+ * aux_head of "struct perf_buffer". aux_tail will be moved in perf tools
+ * side when writing the data from aux buffer to perf.data file in disk.
+ *
+ * Here in the private aux structure, we maintain head to know where
+ * to copy data next time in the PMU driver. vpa_pmu_buf->head is moved to
+ * maintain the aux head for PMU driver. It is responsiblity of PMU
+ * driver to make sure data is copied between perf_aux_output_begin and
+ * perf_aux_output_end.
+ *
+ * After data is copied in vpa_dtl_capture_aux() function, perf_aux_output_end()
+ * is called to move the aux->head of "struct perf_buffer" to indicate size of
+ * data in aux buffer. This will post a PERF_RECORD_AUX into the perf buffer.
+ * Data will be written to disk only when the allocated buffer is full.
+ *
+ * By this approach, all the DTL data will be present as-is in the
+ * perf.data. The data will be pre-processed in perf tools side when doing
+ * perf report/perf script and this will avoid time taken to create samples
+ * in the kernel space.
+ */
+static void vpa_dtl_dump_sample_data(struct perf_event *event)
+{
+	u64 cur_idx, last_idx, i;
+	u64 boot_tb;
+	struct boottb_freq boottb_freq;
+
+	/* actual number of entries read */
+	long n_read = 0, read_size = 0;
+
+	/* number of entries added to dtl buffer */
+	long n_req;
+
+	struct vpa_pmu_ctx *vpa_ctx = this_cpu_ptr(&vpa_pmu_ctx);
+
+	struct vpa_pmu_buf *aux_buf;
+
+	struct vpa_dtl *dtl = &per_cpu(vpa_dtl_cpu, event->cpu);
+	u64 size;
+
+	cur_idx = be64_to_cpu(lppaca_of(event->cpu).dtl_idx);
+	last_idx = dtl->last_idx;
+
+	if (last_idx + N_DISPATCH_LOG <= cur_idx)
+		last_idx = cur_idx - N_DISPATCH_LOG + 1;
+
+	n_req = cur_idx - last_idx;
+
+	/* no new entry added to the buffer, return */
+	if (n_req <= 0)
+		return;
+
+	dtl->last_idx = last_idx + n_req;
+	boot_tb = get_boot_tb();
+
+	i = last_idx % N_DISPATCH_LOG;
+
+	aux_buf = perf_aux_output_begin(&vpa_ctx->handle, event);
+	if (!aux_buf) {
+		pr_debug("returning. no aux\n");
+		return;
+	}
+
+	if (!aux_buf->boottb_freq_saved) {
+		pr_debug("Copying boot tb to aux buffer: %lld\n", boot_tb);
+		/* Save boot_tb to convert raw timebase to it's relative system boot time */
+		boottb_freq.boot_tb = boot_tb;
+		/* Save tb_ticks_per_sec to convert timebase to sec */
+		boottb_freq.tb_freq = tb_ticks_per_sec;
+		boottb_freq.timebase = 0;
+		memcpy(aux_buf->base, &boottb_freq, sizeof(boottb_freq));
+		aux_buf->head += 1;
+		aux_buf->boottb_freq_saved = 1;
+		n_read += 1;
+	}
+
+	/* read the tail of the buffer if we've wrapped */
+	if (i + n_req > N_DISPATCH_LOG) {
+		read_size = N_DISPATCH_LOG - i;
+		vpa_dtl_capture_aux(&read_size, aux_buf, dtl, i);
+		n_req -= read_size;
+		n_read += read_size;
+		i = 0;
+		if (aux_buf->full) {
+			size = (n_read * sizeof(struct dtl_entry));
+			if ((size +  aux_buf->head_size) > aux_buf->size) {
+				size = aux_buf->size - aux_buf->head_size;
+				perf_aux_output_end(&vpa_ctx->handle, size);
+				aux_buf->head = 0;
+				aux_buf->head_size = 0;
+			} else {
+				aux_buf->head_size += (n_read * sizeof(struct dtl_entry));
+				perf_aux_output_end(&vpa_ctx->handle, n_read * sizeof(struct dtl_entry));
+			}
+			goto out;
+		}
+	}
+
+	/* .. and now the head */
+	vpa_dtl_capture_aux(&n_req, aux_buf, dtl, i);
+
+	size = ((n_req + n_read) * sizeof(struct dtl_entry));
+	if ((size +  aux_buf->head_size) > aux_buf->size) {
+		size = aux_buf->size - aux_buf->head_size;
+		perf_aux_output_end(&vpa_ctx->handle, size);
+		aux_buf->head = 0;
+		aux_buf->head_size = 0;
+	} else {
+		aux_buf->head_size += ((n_req + n_read) * sizeof(struct dtl_entry));
+		/* Move the aux->head to indicate size of data in aux buffer */
+		perf_aux_output_end(&vpa_ctx->handle, (n_req + n_read) * sizeof(struct dtl_entry));
+	}
+out:
+	aux_buf->full = 0;
+}
+
+/*
+ * The VPA Dispatch Trace log counters do not interrupt on overflow.
+ * Therefore, the kernel needs to poll the counters to avoid missing
+ * an overflow using hrtimer. The timer interval is based on sample_period
+ * count provided by user, and minimum interval is 1 millisecond.
+ */
+static enum hrtimer_restart vpa_dtl_hrtimer_handle(struct hrtimer *hrtimer)
+{
+	struct perf_event *event;
+	u64 period;
+
+	event = container_of(hrtimer, struct perf_event, hw.hrtimer);
+
+	if (event->state != PERF_EVENT_STATE_ACTIVE)
+		return HRTIMER_NORESTART;
+
+	vpa_dtl_dump_sample_data(event);
+	period = max_t(u64, NSEC_PER_MSEC, event->hw.sample_period);
+	hrtimer_forward_now(hrtimer, ns_to_ktime(period));
+
+	return HRTIMER_RESTART;
+}
+
+static void vpa_dtl_start_hrtimer(struct perf_event *event)
+{
+	u64 period;
+	struct hw_perf_event *hwc = &event->hw;
+
+	period = max_t(u64, NSEC_PER_MSEC, hwc->sample_period);
+	hrtimer_start(&hwc->hrtimer, ns_to_ktime(period), HRTIMER_MODE_REL_PINNED);
+}
+
+static void vpa_dtl_stop_hrtimer(struct perf_event *event)
+{
+	struct hw_perf_event *hwc = &event->hw;
+
+	hrtimer_cancel(&hwc->hrtimer);
+}
+
+static void vpa_dtl_reset_global_refc(struct perf_event *event)
+{
+	spin_lock(&dtl_global_lock);
+	dtl_global_refc--;
+	if (dtl_global_refc <= 0) {
+		dtl_global_refc = 0;
+		up_write(&dtl_access_lock);
+	}
+	spin_unlock(&dtl_global_lock);
+}
+
+static int vpa_dtl_mem_alloc(int cpu)
+{
+	struct vpa_dtl *dtl = &per_cpu(vpa_dtl_cpu, cpu);
+	struct dtl_entry *buf = NULL;
+
+	/* Check for dispatch trace log buffer cache */
+	if (!dtl_cache)
+		return -ENOMEM;
+
+	buf = kmem_cache_alloc_node(dtl_cache, GFP_KERNEL | GFP_ATOMIC, cpu_to_node(cpu));
+	if (!buf) {
+		pr_warn("buffer allocation failed for cpu %d\n", cpu);
+		return -ENOMEM;
+	}
+	dtl->buf = buf;
+	return 0;
+}
+
+static int vpa_dtl_event_init(struct perf_event *event)
+{
+	struct hw_perf_event *hwc = &event->hw;
+
+	/* test the event attr type for PMU enumeration */
+	if (event->attr.type != event->pmu->type)
+		return -ENOENT;
+
+	if (!perfmon_capable())
+		return -EACCES;
+
+	/* Return if this is a counting event */
+	if (!is_sampling_event(event))
+		return -EOPNOTSUPP;
+
+	/* no branch sampling */
+	if (has_branch_stack(event))
+		return -EOPNOTSUPP;
+
+	/* Invalid eventcode */
+	switch (event->attr.config) {
+	case DTL_LOG_CEDE:
+	case DTL_LOG_PREEMPT:
+	case DTL_LOG_FAULT:
+	case DTL_LOG_ALL:
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	spin_lock(&dtl_global_lock);
+
+	/*
+	 * To ensure there are no other conflicting dtl users
+	 * (example: /proc/powerpc/vcpudispatch_stats or debugfs dtl),
+	 * below code try to take the dtl_access_lock.
+	 * The dtl_access_lock is a rwlock defined in dtl.h, which is used
+	 * to unsure there is no conflicting dtl users.
+	 * Based on below code, vpa_dtl pmu tries to take write access lock
+	 * and also checks for dtl_global_refc, to make sure that the
+	 * dtl_access_lock is taken by vpa_dtl pmu interface.
+	 */
+	if (dtl_global_refc == 0 && !down_write_trylock(&dtl_access_lock)) {
+		spin_unlock(&dtl_global_lock);
+		return -EBUSY;
+	}
+
+	/* Allocate dtl buffer memory */
+	if (vpa_dtl_mem_alloc(event->cpu)) {
+		spin_unlock(&dtl_global_lock);
+		return -ENOMEM;
+	}
+
+	/*
+	 * Increment the number of active vpa_dtl pmu threads. The
+	 * dtl_global_refc is used to keep count of cpu threads that
+	 * currently capturing dtl data using vpa_dtl pmu interface.
+	 */
+	dtl_global_refc++;
+
+	spin_unlock(&dtl_global_lock);
+
+	hrtimer_setup(&hwc->hrtimer, vpa_dtl_hrtimer_handle, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
+
+	/*
+	 * Since hrtimers have a fixed rate, we can do a static freq->period
+	 * mapping and avoid the whole period adjust feedback stuff.
+	 */
+	if (event->attr.freq) {
+		long freq = event->attr.sample_freq;
+
+		event->attr.sample_period = NSEC_PER_SEC / freq;
+		hwc->sample_period = event->attr.sample_period;
+		local64_set(&hwc->period_left, hwc->sample_period);
+		hwc->last_period = hwc->sample_period;
+		event->attr.freq = 0;
+	}
+
+	event->destroy = vpa_dtl_reset_global_refc;
+	return 0;
+}
+
+static int vpa_dtl_event_add(struct perf_event *event, int flags)
+{
+	int ret, hwcpu;
+	unsigned long addr;
+	struct vpa_dtl *dtl = &per_cpu(vpa_dtl_cpu, event->cpu);
+
+	/*
+	 * Register our dtl buffer with the hypervisor. The
+	 * HV expects the buffer size to be passed in the second
+	 * word of the buffer. Refer section '14.11.3.2. H_REGISTER_VPA'
+	 * from PAPR for more information.
+	 */
+	((u32 *)dtl->buf)[1] = cpu_to_be32(DISPATCH_LOG_BYTES);
+	dtl->last_idx = 0;
+
+	hwcpu = get_hard_smp_processor_id(event->cpu);
+	addr = __pa(dtl->buf);
+
+	ret = register_dtl(hwcpu, addr);
+	if (ret) {
+		pr_warn("DTL registration for cpu %d (hw %d) failed with %d\n",
+			event->cpu, hwcpu, ret);
+		return ret;
+	}
+
+	/* set our initial buffer indices */
+	lppaca_of(event->cpu).dtl_idx = 0;
+
+	/*
+	 * Ensure that our updates to the lppaca fields have
+	 * occurred before we actually enable the logging
+	 */
+	smp_wmb();
+
+	/* enable event logging */
+	lppaca_of(event->cpu).dtl_enable_mask = event->attr.config;
+
+	vpa_dtl_start_hrtimer(event);
+
+	return 0;
+}
+
+static void vpa_dtl_event_del(struct perf_event *event, int flags)
+{
+	int hwcpu = get_hard_smp_processor_id(event->cpu);
+	struct vpa_dtl *dtl = &per_cpu(vpa_dtl_cpu, event->cpu);
+
+	vpa_dtl_stop_hrtimer(event);
+	unregister_dtl(hwcpu);
+	kmem_cache_free(dtl_cache, dtl->buf);
+	dtl->buf = NULL;
+	lppaca_of(event->cpu).dtl_enable_mask = 0x0;
+}
+
+/*
+ * This function definition is empty as vpa_dtl_dump_sample_data
+ * is used to parse and dump the dispatch trace log data,
+ * to perf data.
+ */
+static void vpa_dtl_event_read(struct perf_event *event)
+{
+}
+
+/*
+ * Set up pmu-private data structures for an AUX area
+ * **pages contains the aux buffer allocated for this event
+ * for the corresponding cpu. rb_alloc_aux uses "alloc_pages_node"
+ * and returns pointer to each page address. Map these pages to
+ * contiguous space using vmap and use that as base address.
+ *
+ * The aux private data structure ie, "struct vpa_pmu_buf" mainly
+ * saves
+ * - buf->base: aux buffer base address
+ * - buf->head: offset from base address where data will be written to.
+ * - buf->size: Size of allocated memory
+ */
+static void *vpa_dtl_setup_aux(struct perf_event *event, void **pages,
+		int nr_pages, bool snapshot)
+{
+	int i, cpu = event->cpu;
+	struct vpa_pmu_buf *buf __free(kfree) = NULL;
+	struct page **pglist __free(kfree) = NULL;
+
+	/* We need at least one page for this to work. */
+	if (!nr_pages)
+		return NULL;
+
+	if (cpu == -1)
+		cpu = raw_smp_processor_id();
+
+	buf = kzalloc_node(sizeof(*buf), GFP_KERNEL, cpu_to_node(cpu));
+	if (!buf)
+		return NULL;
+
+	pglist = kcalloc(nr_pages, sizeof(*pglist), GFP_KERNEL);
+	if (!pglist)
+		return NULL;
+
+	for (i = 0; i < nr_pages; ++i)
+		pglist[i] = virt_to_page(pages[i]);
+
+	buf->base = vmap(pglist, nr_pages, VM_MAP, PAGE_KERNEL);
+	if (!buf->base)
+		return NULL;
+
+	buf->nr_pages = nr_pages;
+	buf->snapshot = false;
+
+	buf->size = nr_pages << PAGE_SHIFT;
+	buf->head = 0;
+	buf->head_size = 0;
+	buf->boottb_freq_saved = 0;
+	buf->threshold = ((buf->size - 32) / sizeof(struct dtl_entry));
+	return no_free_ptr(buf);
+}
+
+/*
+ * free pmu-private AUX data structures
+ */
+static void vpa_dtl_free_aux(void *aux)
+{
+	struct vpa_pmu_buf *buf = aux;
+
+	vunmap(buf->base);
+	kfree(buf);
+}
+
+static struct pmu vpa_dtl_pmu = {
+	.task_ctx_nr = perf_invalid_context,
+
+	.name = "vpa_dtl",
+	.attr_groups = attr_groups,
+	.event_init  = vpa_dtl_event_init,
+	.add         = vpa_dtl_event_add,
+	.del         = vpa_dtl_event_del,
+	.read        = vpa_dtl_event_read,
+	.setup_aux   = vpa_dtl_setup_aux,
+	.free_aux    = vpa_dtl_free_aux,
+	.capabilities = PERF_PMU_CAP_NO_EXCLUDE | PERF_PMU_CAP_EXCLUSIVE,
+};
+
+static int vpa_dtl_init(void)
+{
+	int r;
+
+	if (!firmware_has_feature(FW_FEATURE_SPLPAR)) {
+		pr_debug("not a shared virtualized system, not enabling\n");
+		return -ENODEV;
+	}
+
+	/* This driver is intended only for L1 host. */
+	if (is_kvm_guest()) {
+		pr_debug("Only supported for L1 host system\n");
+		return -ENODEV;
+	}
+
+	r = perf_pmu_register(&vpa_dtl_pmu, vpa_dtl_pmu.name, -1);
+	if (r)
+		return r;
+
+	return 0;
+}
+
+device_initcall(vpa_dtl_init);
+#endif //CONFIG_PPC_SPLPAR
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index 35a1f4b9f827..fc79f8466933 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -231,7 +231,6 @@ config PPC4xx_GPIO
 	bool "PPC4xx GPIO support"
 	depends on 44x
 	select GPIOLIB
-	select OF_GPIO_MM_GPIOCHIP
 	help
 	  Enable gpiolib support for ppc440 based boards
 
diff --git a/arch/powerpc/platforms/44x/gpio.c b/arch/powerpc/platforms/44x/gpio.c
index 08ab76582568..aea0d913b59d 100644
--- a/arch/powerpc/platforms/44x/gpio.c
+++ b/arch/powerpc/platforms/44x/gpio.c
@@ -14,10 +14,10 @@
 #include <linux/spinlock.h>
 #include <linux/io.h>
 #include <linux/of.h>
-#include <linux/gpio/legacy-of-mm-gpiochip.h>
 #include <linux/gpio/driver.h>
 #include <linux/types.h>
 #include <linux/slab.h>
+#include <linux/platform_device.h>
 
 #define GPIO_MASK(gpio)		(0x80000000 >> (gpio))
 #define GPIO_MASK2(gpio)	(0xc0000000 >> ((gpio) * 2))
@@ -45,7 +45,8 @@ struct ppc4xx_gpio {
 };
 
 struct ppc4xx_gpio_chip {
-	struct of_mm_gpio_chip mm_gc;
+	struct gpio_chip gc;
+	void __iomem *regs;
 	spinlock_t lock;
 };
 
@@ -57,8 +58,8 @@ struct ppc4xx_gpio_chip {
 
 static int ppc4xx_gpio_get(struct gpio_chip *gc, unsigned int gpio)
 {
-	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
-	struct ppc4xx_gpio __iomem *regs = mm_gc->regs;
+	struct ppc4xx_gpio_chip *chip = gpiochip_get_data(gc);
+	struct ppc4xx_gpio __iomem *regs = chip->regs;
 
 	return !!(in_be32(&regs->ir) & GPIO_MASK(gpio));
 }
@@ -66,8 +67,8 @@ static int ppc4xx_gpio_get(struct gpio_chip *gc, unsigned int gpio)
 static inline void
 __ppc4xx_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
 {
-	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
-	struct ppc4xx_gpio __iomem *regs = mm_gc->regs;
+	struct ppc4xx_gpio_chip *chip = gpiochip_get_data(gc);
+	struct ppc4xx_gpio __iomem *regs = chip->regs;
 
 	if (val)
 		setbits32(&regs->or, GPIO_MASK(gpio));
@@ -93,9 +94,8 @@ static int ppc4xx_gpio_set(struct gpio_chip *gc, unsigned int gpio, int val)
 
 static int ppc4xx_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
 {
-	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
 	struct ppc4xx_gpio_chip *chip = gpiochip_get_data(gc);
-	struct ppc4xx_gpio __iomem *regs = mm_gc->regs;
+	struct ppc4xx_gpio __iomem *regs = chip->regs;
 	unsigned long flags;
 
 	spin_lock_irqsave(&chip->lock, flags);
@@ -123,9 +123,8 @@ static int ppc4xx_gpio_dir_in(struct gpio_chip *gc, unsigned int gpio)
 static int
 ppc4xx_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
 {
-	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
 	struct ppc4xx_gpio_chip *chip = gpiochip_get_data(gc);
-	struct ppc4xx_gpio __iomem *regs = mm_gc->regs;
+	struct ppc4xx_gpio __iomem *regs = chip->regs;
 	unsigned long flags;
 
 	spin_lock_irqsave(&chip->lock, flags);
@@ -155,42 +154,57 @@ ppc4xx_gpio_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
 	return 0;
 }
 
-static int __init ppc4xx_add_gpiochips(void)
+static int ppc4xx_gpio_probe(struct platform_device *ofdev)
 {
-	struct device_node *np;
-
-	for_each_compatible_node(np, NULL, "ibm,ppc4xx-gpio") {
-		int ret;
-		struct ppc4xx_gpio_chip *ppc4xx_gc;
-		struct of_mm_gpio_chip *mm_gc;
-		struct gpio_chip *gc;
-
-		ppc4xx_gc = kzalloc(sizeof(*ppc4xx_gc), GFP_KERNEL);
-		if (!ppc4xx_gc) {
-			ret = -ENOMEM;
-			goto err;
-		}
-
-		spin_lock_init(&ppc4xx_gc->lock);
-
-		mm_gc = &ppc4xx_gc->mm_gc;
-		gc = &mm_gc->gc;
-
-		gc->ngpio = 32;
-		gc->direction_input = ppc4xx_gpio_dir_in;
-		gc->direction_output = ppc4xx_gpio_dir_out;
-		gc->get = ppc4xx_gpio_get;
-		gc->set = ppc4xx_gpio_set;
-
-		ret = of_mm_gpiochip_add_data(np, mm_gc, ppc4xx_gc);
-		if (ret)
-			goto err;
-		continue;
-err:
-		pr_err("%pOF: registration failed with status %d\n", np, ret);
-		kfree(ppc4xx_gc);
-		/* try others anyway */
-	}
-	return 0;
+	struct device *dev = &ofdev->dev;
+	struct device_node *np = dev->of_node;
+	struct ppc4xx_gpio_chip *chip;
+	struct gpio_chip *gc;
+
+	chip = devm_kzalloc(dev, sizeof(*chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	spin_lock_init(&chip->lock);
+
+	gc = &chip->gc;
+
+	gc->base = -1;
+	gc->ngpio = 32;
+	gc->direction_input = ppc4xx_gpio_dir_in;
+	gc->direction_output = ppc4xx_gpio_dir_out;
+	gc->get = ppc4xx_gpio_get;
+	gc->set = ppc4xx_gpio_set;
+
+	gc->label = devm_kasprintf(dev, GFP_KERNEL, "%pOF", np);
+	if (!gc->label)
+		return -ENOMEM;
+
+	chip->regs = devm_of_iomap(dev, np, 0, NULL);
+	if (IS_ERR(chip->regs))
+		return PTR_ERR(chip->regs);
+
+	return devm_gpiochip_add_data(dev, gc, chip);
+}
+
+static const struct of_device_id ppc4xx_gpio_match[] = {
+	{
+		.compatible = "ibm,ppc4xx-gpio",
+	},
+	{},
+};
+MODULE_DEVICE_TABLE(of, ppc4xx_gpio_match);
+
+static struct platform_driver ppc4xx_gpio_driver = {
+	.probe		= ppc4xx_gpio_probe,
+	.driver		= {
+		.name	= "ppc4xx-gpio",
+		.of_match_table	= ppc4xx_gpio_match,
+	},
+};
+
+static int __init ppc4xx_gpio_init(void)
+{
+	return platform_driver_register(&ppc4xx_gpio_driver);
 }
-arch_initcall(ppc4xx_add_gpiochips);
+arch_initcall(ppc4xx_gpio_init);
diff --git a/arch/powerpc/platforms/8xx/Kconfig b/arch/powerpc/platforms/8xx/Kconfig
index 8623aebfac48..abb2b45b2789 100644
--- a/arch/powerpc/platforms/8xx/Kconfig
+++ b/arch/powerpc/platforms/8xx/Kconfig
@@ -101,7 +101,6 @@ comment "Generic MPC8xx Options"
 config 8xx_GPIO
 	bool "GPIO API Support"
 	select GPIOLIB
-	select OF_GPIO_MM_GPIOCHIP
 	help
 	  Saying Y here will cause the ports on an MPC8xx processor to be used
 	  with the GPIO API.  If you say N here, the kernel needs less memory.
diff --git a/arch/powerpc/platforms/8xx/cpm1-ic.c b/arch/powerpc/platforms/8xx/cpm1-ic.c
index a49d4a9ab3bc..3292071e4da3 100644
--- a/arch/powerpc/platforms/8xx/cpm1-ic.c
+++ b/arch/powerpc/platforms/8xx/cpm1-ic.c
@@ -110,8 +110,7 @@ static int cpm_pic_probe(struct platform_device *pdev)
 
 	out_be32(&data->reg->cpic_cimr, 0);
 
-	data->host = irq_domain_create_linear(of_fwnode_handle(dev->of_node),
-					      64, &cpm_pic_host_ops, data);
+	data->host = irq_domain_create_linear(dev_fwnode(dev), 64, &cpm_pic_host_ops, data);
 	if (!data->host)
 		return -ENODEV;
 
diff --git a/arch/powerpc/platforms/Kconfig b/arch/powerpc/platforms/Kconfig
index fea3766eac0f..c4e61843d9d9 100644
--- a/arch/powerpc/platforms/Kconfig
+++ b/arch/powerpc/platforms/Kconfig
@@ -232,7 +232,6 @@ config QE_GPIO
 	bool "QE GPIO support"
 	depends on QUICC_ENGINE
 	select GPIOLIB
-	select OF_GPIO_MM_GPIOCHIP
 	help
 	  Say Y here if you're going to use hardware that connects to the
 	  QE GPIOs.
@@ -243,7 +242,6 @@ config CPM2
 	select CPM
 	select HAVE_PCI
 	select GPIOLIB
-	select OF_GPIO_MM_GPIOCHIP
 	help
 	  The CPM2 (Communications Processor Module) is a coprocessor on
 	  embedded CPUs made by Freescale.  Selecting this option means that
diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype
index 613b383ed8b3..7b527d18aa5e 100644
--- a/arch/powerpc/platforms/Kconfig.cputype
+++ b/arch/powerpc/platforms/Kconfig.cputype
@@ -122,16 +122,11 @@ choice
 	  If unsure, select Generic.
 
 config POWERPC64_CPU
-	bool "Generic (POWER5 and PowerPC 970 and above)"
-	depends on PPC_BOOK3S_64 && !CPU_LITTLE_ENDIAN
-	select PPC_64S_HASH_MMU
-
-config POWERPC64_CPU
-	bool "Generic (POWER8 and above)"
-	depends on PPC_BOOK3S_64 && CPU_LITTLE_ENDIAN
-	select ARCH_HAS_FAST_MULTIPLIER
+	bool "Generic 64 bits powerpc"
+	depends on PPC_BOOK3S_64
+	select ARCH_HAS_FAST_MULTIPLIER if CPU_LITTLE_ENDIAN
 	select PPC_64S_HASH_MMU
-	select PPC_HAS_LBARX_LHARX
+	select PPC_HAS_LBARX_LHARX if CPU_LITTLE_ENDIAN
 
 config POWERPC_CPU
 	bool "Generic 32 bits powerpc"
diff --git a/arch/powerpc/platforms/cell/spufs/file.c b/arch/powerpc/platforms/cell/spufs/file.c
index d5a2c77bc908..ce839783c0df 100644
--- a/arch/powerpc/platforms/cell/spufs/file.c
+++ b/arch/powerpc/platforms/cell/spufs/file.c
@@ -1430,7 +1430,7 @@ static int spufs_mfc_open(struct inode *inode, struct file *file)
 	if (ctx->owner != current->mm)
 		return -EINVAL;
 
-	if (atomic_read(&inode->i_count) != 1)
+	if (icount_read(inode) != 1)
 		return -EBUSY;
 
 	mutex_lock(&ctx->mapping_lock);
diff --git a/arch/powerpc/platforms/cell/spufs/syscalls.c b/arch/powerpc/platforms/cell/spufs/syscalls.c
index 157e046e6e93..ea4ba1b6ce6a 100644
--- a/arch/powerpc/platforms/cell/spufs/syscalls.c
+++ b/arch/powerpc/platforms/cell/spufs/syscalls.c
@@ -67,11 +67,11 @@ static long do_spu_create(const char __user *pathname, unsigned int flags,
 	struct dentry *dentry;
 	int ret;
 
-	dentry = user_path_create(AT_FDCWD, pathname, &path, LOOKUP_DIRECTORY);
+	dentry = start_creating_user_path(AT_FDCWD, pathname, &path, LOOKUP_DIRECTORY);
 	ret = PTR_ERR(dentry);
 	if (!IS_ERR(dentry)) {
 		ret = spufs_create(&path, dentry, flags, mode, neighbor);
-		done_path_create(&path, dentry);
+		end_creating_path(&path, dentry);
 	}
 
 	return ret;
diff --git a/arch/powerpc/platforms/powernv/Kconfig b/arch/powerpc/platforms/powernv/Kconfig
index 95d7ba73d43d..b5ad7c173ef0 100644
--- a/arch/powerpc/platforms/powernv/Kconfig
+++ b/arch/powerpc/platforms/powernv/Kconfig
@@ -9,6 +9,7 @@ config PPC_POWERNV
 	select PPC_P7_NAP
 	select FORCE_PCI
 	select PCI_MSI
+	select IRQ_MSI_LIB
 	select EPAPR_BOOT
 	select PPC_INDIRECT_PIO
 	select PPC_UDBG_16550
diff --git a/arch/powerpc/platforms/powernv/pci-ioda.c b/arch/powerpc/platforms/powernv/pci-ioda.c
index d8ccf2c9b98a..b0c1d9d16fb5 100644
--- a/arch/powerpc/platforms/powernv/pci-ioda.c
+++ b/arch/powerpc/platforms/powernv/pci-ioda.c
@@ -15,6 +15,7 @@
 #include <linux/init.h>
 #include <linux/memblock.h>
 #include <linux/irq.h>
+#include <linux/irqchip/irq-msi-lib.h>
 #include <linux/io.h>
 #include <linux/msi.h>
 #include <linux/iommu.h>
@@ -37,7 +38,6 @@
 #include <asm/firmware.h>
 #include <asm/pnv-pci.h>
 #include <asm/mmzone.h>
-#include <asm/xive.h>
 
 #include "powernv.h"
 #include "pci.h"
@@ -1707,23 +1707,6 @@ static int __pnv_pci_ioda_msi_setup(struct pnv_phb *phb, struct pci_dev *dev,
 	return 0;
 }
 
-/*
- * The msi_free() op is called before irq_domain_free_irqs_top() when
- * the handler data is still available. Use that to clear the XIVE
- * controller.
- */
-static void pnv_msi_ops_msi_free(struct irq_domain *domain,
-				 struct msi_domain_info *info,
-				 unsigned int irq)
-{
-	if (xive_enabled())
-		xive_irq_free_data(irq);
-}
-
-static struct msi_domain_ops pnv_pci_msi_domain_ops = {
-	.msi_free	= pnv_msi_ops_msi_free,
-};
-
 static void pnv_msi_shutdown(struct irq_data *d)
 {
 	d = d->parent_data;
@@ -1731,31 +1714,33 @@ static void pnv_msi_shutdown(struct irq_data *d)
 		d->chip->irq_shutdown(d);
 }
 
-static void pnv_msi_mask(struct irq_data *d)
+static bool pnv_init_dev_msi_info(struct device *dev, struct irq_domain *domain,
+				  struct irq_domain *real_parent, struct msi_domain_info *info)
 {
-	pci_msi_mask_irq(d);
-	irq_chip_mask_parent(d);
-}
+	struct irq_chip *chip = info->chip;
 
-static void pnv_msi_unmask(struct irq_data *d)
-{
-	pci_msi_unmask_irq(d);
-	irq_chip_unmask_parent(d);
-}
+	if (!msi_lib_init_dev_msi_info(dev, domain, real_parent, info))
+		return false;
 
-static struct irq_chip pnv_pci_msi_irq_chip = {
-	.name		= "PNV-PCI-MSI",
-	.irq_shutdown	= pnv_msi_shutdown,
-	.irq_mask	= pnv_msi_mask,
-	.irq_unmask	= pnv_msi_unmask,
-	.irq_eoi	= irq_chip_eoi_parent,
-};
+	chip->irq_shutdown = pnv_msi_shutdown;
+	return true;
+}
 
-static struct msi_domain_info pnv_msi_domain_info = {
-	.flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
-		  MSI_FLAG_MULTI_PCI_MSI  | MSI_FLAG_PCI_MSIX),
-	.ops   = &pnv_pci_msi_domain_ops,
-	.chip  = &pnv_pci_msi_irq_chip,
+#define PNV_PCI_MSI_FLAGS_REQUIRED (MSI_FLAG_USE_DEF_DOM_OPS		| \
+				    MSI_FLAG_USE_DEF_CHIP_OPS		| \
+				    MSI_FLAG_PCI_MSI_MASK_PARENT)
+#define PNV_PCI_MSI_FLAGS_SUPPORTED (MSI_GENERIC_FLAGS_MASK		| \
+				     MSI_FLAG_PCI_MSIX			| \
+				     MSI_FLAG_MULTI_PCI_MSI)
+
+static const struct msi_parent_ops pnv_msi_parent_ops = {
+	.required_flags		= PNV_PCI_MSI_FLAGS_REQUIRED,
+	.supported_flags	= PNV_PCI_MSI_FLAGS_SUPPORTED,
+	.chip_flags		= MSI_CHIP_FLAG_SET_EOI,
+	.bus_select_token	= DOMAIN_BUS_NEXUS,
+	.bus_select_mask	= MATCH_PCI_MSI,
+	.prefix			= "PNV-",
+	.init_dev_msi_info	= pnv_init_dev_msi_info,
 };
 
 static void pnv_msi_compose_msg(struct irq_data *d, struct msi_msg *msg)
@@ -1854,7 +1839,7 @@ static int pnv_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
 	return 0;
 
 out:
-	irq_domain_free_irqs_parent(domain, virq, i - 1);
+	irq_domain_free_irqs_parent(domain, virq, i);
 	msi_bitmap_free_hwirqs(&phb->msi_bmp, hwirq, nr_irqs);
 	return ret;
 }
@@ -1870,41 +1855,30 @@ static void pnv_irq_domain_free(struct irq_domain *domain, unsigned int virq,
 		 virq, d->hwirq, nr_irqs);
 
 	msi_bitmap_free_hwirqs(&phb->msi_bmp, d->hwirq, nr_irqs);
-	/* XIVE domain is cleared through ->msi_free() */
+	irq_domain_free_irqs_parent(domain, virq, nr_irqs);
 }
 
 static const struct irq_domain_ops pnv_irq_domain_ops = {
+	.select	= msi_lib_irq_domain_select,
 	.alloc  = pnv_irq_domain_alloc,
 	.free   = pnv_irq_domain_free,
 };
 
 static int __init pnv_msi_allocate_domains(struct pci_controller *hose, unsigned int count)
 {
-	struct pnv_phb *phb = hose->private_data;
 	struct irq_domain *parent = irq_get_default_domain();
-
-	hose->fwnode = irq_domain_alloc_named_id_fwnode("PNV-MSI", phb->opal_id);
-	if (!hose->fwnode)
-		return -ENOMEM;
-
-	hose->dev_domain = irq_domain_create_hierarchy(parent, 0, count,
-						       hose->fwnode,
-						       &pnv_irq_domain_ops, hose);
+	struct irq_domain_info info = {
+		.fwnode		= of_fwnode_handle(hose->dn),
+		.ops		= &pnv_irq_domain_ops,
+		.host_data	= hose,
+		.size		= count,
+		.parent		= parent,
+	};
+
+	hose->dev_domain = msi_create_parent_irq_domain(&info, &pnv_msi_parent_ops);
 	if (!hose->dev_domain) {
-		pr_err("PCI: failed to create IRQ domain bridge %pOF (domain %d)\n",
-		       hose->dn, hose->global_number);
-		irq_domain_free_fwnode(hose->fwnode);
-		return -ENOMEM;
-	}
-
-	hose->msi_domain = pci_msi_create_irq_domain(of_fwnode_handle(hose->dn),
-						     &pnv_msi_domain_info,
-						     hose->dev_domain);
-	if (!hose->msi_domain) {
 		pr_err("PCI: failed to create MSI IRQ domain bridge %pOF (domain %d)\n",
 		       hose->dn, hose->global_number);
-		irq_domain_free_fwnode(hose->fwnode);
-		irq_domain_remove(hose->dev_domain);
 		return -ENOMEM;
 	}
 
diff --git a/arch/powerpc/platforms/powernv/subcore.h b/arch/powerpc/platforms/powernv/subcore.h
index 77feee8436d4..413fd85d9bc2 100644
--- a/arch/powerpc/platforms/powernv/subcore.h
+++ b/arch/powerpc/platforms/powernv/subcore.h
@@ -9,7 +9,7 @@
 #define SYNC_STEP_REAL_MODE	2	/* Set by secondary when in real mode  */
 #define SYNC_STEP_FINISHED	3	/* Set by secondary when split/unsplit is done */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #ifdef CONFIG_SMP
 void split_core_secondary_loop(u8 *state);
@@ -18,4 +18,4 @@ extern void update_subcore_sibling_mask(void);
 static inline void update_subcore_sibling_mask(void) { }
 #endif /* CONFIG_SMP */
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
diff --git a/arch/powerpc/platforms/pseries/Kconfig b/arch/powerpc/platforms/pseries/Kconfig
index fa3c2fff082a..3e042218d6cd 100644
--- a/arch/powerpc/platforms/pseries/Kconfig
+++ b/arch/powerpc/platforms/pseries/Kconfig
@@ -7,6 +7,7 @@ config PPC_PSERIES
 	select OF_DYNAMIC
 	select FORCE_PCI
 	select PCI_MSI
+	select IRQ_MSI_LIB
 	select GENERIC_ALLOCATOR
 	select PPC_XICS
 	select PPC_XIVE_SPAPR
diff --git a/arch/powerpc/platforms/pseries/Makefile b/arch/powerpc/platforms/pseries/Makefile
index 57222678bb3f..931ebaa474c8 100644
--- a/arch/powerpc/platforms/pseries/Makefile
+++ b/arch/powerpc/platforms/pseries/Makefile
@@ -5,6 +5,7 @@ obj-y			:= lpar.o hvCall.o nvram.o reconfig.o \
 			   of_helpers.o rtas-work-area.o papr-sysparm.o \
 			   papr-rtas-common.o papr-vpd.o papr-indices.o \
 			   papr-platform-dump.o papr-phy-attest.o \
+			   papr-hvpipe.o \
 			   setup.o iommu.o event_sources.o ras.o \
 			   firmware.o power.o dlpar.o mobility.o rng.o \
 			   pci.o pci_dlpar.o eeh_pseries.o msi.o \
diff --git a/arch/powerpc/platforms/pseries/mobility.c b/arch/powerpc/platforms/pseries/mobility.c
index 62bd8e2d5d4c..95fe802ccdfd 100644
--- a/arch/powerpc/platforms/pseries/mobility.c
+++ b/arch/powerpc/platforms/pseries/mobility.c
@@ -28,6 +28,7 @@
 #include <asm/rtas.h>
 #include "pseries.h"
 #include "vas.h"	/* vas_migration_handler() */
+#include "papr-hvpipe.h"	/* hvpipe_migration_handler() */
 #include "../../kernel/cacheinfo.h"
 
 static struct kobject *mobility_kobj;
@@ -744,6 +745,7 @@ static int pseries_migrate_partition(u64 handle)
 	 * by closing VAS windows at the beginning of this function.
 	 */
 	vas_migration_handler(VAS_SUSPEND);
+	hvpipe_migration_handler(HVPIPE_SUSPEND);
 
 	ret = wait_for_vasi_session_suspending(handle);
 	if (ret)
@@ -770,6 +772,7 @@ static int pseries_migrate_partition(u64 handle)
 
 out:
 	vas_migration_handler(VAS_RESUME);
+	hvpipe_migration_handler(HVPIPE_RESUME);
 
 	return ret;
 }
diff --git a/arch/powerpc/platforms/pseries/msi.c b/arch/powerpc/platforms/pseries/msi.c
index ee1c8c6898a3..825f9432e03d 100644
--- a/arch/powerpc/platforms/pseries/msi.c
+++ b/arch/powerpc/platforms/pseries/msi.c
@@ -7,6 +7,7 @@
 #include <linux/crash_dump.h>
 #include <linux/device.h>
 #include <linux/irq.h>
+#include <linux/irqchip/irq-msi-lib.h>
 #include <linux/irqdomain.h>
 #include <linux/msi.h>
 #include <linux/seq_file.h>
@@ -15,7 +16,6 @@
 #include <asm/hw_irq.h>
 #include <asm/ppc-pci.h>
 #include <asm/machdep.h>
-#include <asm/xive.h>
 
 #include "pseries.h"
 
@@ -430,43 +430,25 @@ again:
 static int pseries_msi_ops_prepare(struct irq_domain *domain, struct device *dev,
 				   int nvec, msi_alloc_info_t *arg)
 {
+	struct msi_domain_info *info = domain->host_data;
 	struct pci_dev *pdev = to_pci_dev(dev);
-	int type = pdev->msix_enabled ? PCI_CAP_ID_MSIX : PCI_CAP_ID_MSI;
+	int type = (info->flags & MSI_FLAG_PCI_MSIX) ? PCI_CAP_ID_MSIX : PCI_CAP_ID_MSI;
 
 	return rtas_prepare_msi_irqs(pdev, nvec, type, arg);
 }
 
 /*
- * ->msi_free() is called before irq_domain_free_irqs_top() when the
- * handler data is still available. Use that to clear the XIVE
- * controller data.
- */
-static void pseries_msi_ops_msi_free(struct irq_domain *domain,
-				     struct msi_domain_info *info,
-				     unsigned int irq)
-{
-	if (xive_enabled())
-		xive_irq_free_data(irq);
-}
-
-/*
  * RTAS can not disable one MSI at a time. It's all or nothing. Do it
  * at the end after all IRQs have been freed.
  */
-static void pseries_msi_post_free(struct irq_domain *domain, struct device *dev)
+static void pseries_msi_ops_teardown(struct irq_domain *domain, msi_alloc_info_t *arg)
 {
-	if (WARN_ON_ONCE(!dev_is_pci(dev)))
-		return;
+	struct msi_desc *desc = arg->desc;
+	struct pci_dev *pdev = msi_desc_to_pci_dev(desc);
 
-	rtas_disable_msi(to_pci_dev(dev));
+	rtas_disable_msi(pdev);
 }
 
-static struct msi_domain_ops pseries_pci_msi_domain_ops = {
-	.msi_prepare	= pseries_msi_ops_prepare,
-	.msi_free	= pseries_msi_ops_msi_free,
-	.msi_post_free	= pseries_msi_post_free,
-};
-
 static void pseries_msi_shutdown(struct irq_data *d)
 {
 	d = d->parent_data;
@@ -474,18 +456,6 @@ static void pseries_msi_shutdown(struct irq_data *d)
 		d->chip->irq_shutdown(d);
 }
 
-static void pseries_msi_mask(struct irq_data *d)
-{
-	pci_msi_mask_irq(d);
-	irq_chip_mask_parent(d);
-}
-
-static void pseries_msi_unmask(struct irq_data *d)
-{
-	pci_msi_unmask_irq(d);
-	irq_chip_unmask_parent(d);
-}
-
 static void pseries_msi_write_msg(struct irq_data *data, struct msi_msg *msg)
 {
 	struct msi_desc *entry = irq_data_get_msi_desc(data);
@@ -500,27 +470,39 @@ static void pseries_msi_write_msg(struct irq_data *data, struct msi_msg *msg)
 	entry->msg = *msg;
 }
 
-static struct irq_chip pseries_pci_msi_irq_chip = {
-	.name		= "pSeries-PCI-MSI",
-	.irq_shutdown	= pseries_msi_shutdown,
-	.irq_mask	= pseries_msi_mask,
-	.irq_unmask	= pseries_msi_unmask,
-	.irq_eoi	= irq_chip_eoi_parent,
-	.irq_write_msi_msg	= pseries_msi_write_msg,
-};
+static bool pseries_init_dev_msi_info(struct device *dev, struct irq_domain *domain,
+				      struct irq_domain *real_parent, struct msi_domain_info *info)
+{
+	struct irq_chip *chip = info->chip;
 
+	if (!msi_lib_init_dev_msi_info(dev, domain, real_parent, info))
+		return false;
 
-/*
- * Set MSI_FLAG_MSIX_CONTIGUOUS as there is no way to express to
- * firmware to request a discontiguous or non-zero based range of
- * MSI-X entries. Core code will reject such setup attempts.
- */
-static struct msi_domain_info pseries_msi_domain_info = {
-	.flags = (MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
-		  MSI_FLAG_MULTI_PCI_MSI  | MSI_FLAG_PCI_MSIX |
-		  MSI_FLAG_MSIX_CONTIGUOUS),
-	.ops   = &pseries_pci_msi_domain_ops,
-	.chip  = &pseries_pci_msi_irq_chip,
+	chip->irq_shutdown = pseries_msi_shutdown;
+	chip->irq_write_msi_msg	= pseries_msi_write_msg;
+
+	info->ops->msi_prepare = pseries_msi_ops_prepare;
+	info->ops->msi_teardown = pseries_msi_ops_teardown;
+
+	return true;
+}
+
+#define PSERIES_PCI_MSI_FLAGS_REQUIRED (MSI_FLAG_USE_DEF_DOM_OPS	| \
+					MSI_FLAG_USE_DEF_CHIP_OPS	| \
+					MSI_FLAG_PCI_MSI_MASK_PARENT)
+#define PSERIES_PCI_MSI_FLAGS_SUPPORTED (MSI_GENERIC_FLAGS_MASK		| \
+					 MSI_FLAG_PCI_MSIX		| \
+					 MSI_FLAG_MSIX_CONTIGUOUS	| \
+					 MSI_FLAG_MULTI_PCI_MSI)
+
+static const struct msi_parent_ops pseries_msi_parent_ops = {
+	.required_flags		= PSERIES_PCI_MSI_FLAGS_REQUIRED,
+	.supported_flags	= PSERIES_PCI_MSI_FLAGS_SUPPORTED,
+	.chip_flags		= MSI_CHIP_FLAG_SET_EOI,
+	.bus_select_token	= DOMAIN_BUS_NEXUS,
+	.bus_select_mask	= MATCH_PCI_MSI,
+	.prefix			= "pSeries-",
+	.init_dev_msi_info	= pseries_init_dev_msi_info,
 };
 
 static void pseries_msi_compose_msg(struct irq_data *data, struct msi_msg *msg)
@@ -593,7 +575,7 @@ static int pseries_irq_domain_alloc(struct irq_domain *domain, unsigned int virq
 
 out:
 	/* TODO: handle RTAS cleanup in ->msi_finish() ? */
-	irq_domain_free_irqs_parent(domain, virq, i - 1);
+	irq_domain_free_irqs_parent(domain, virq, i);
 	return ret;
 }
 
@@ -604,11 +586,11 @@ static void pseries_irq_domain_free(struct irq_domain *domain, unsigned int virq
 	struct pci_controller *phb = irq_data_get_irq_chip_data(d);
 
 	pr_debug("%s bridge %pOF %d #%d\n", __func__, phb->dn, virq, nr_irqs);
-
-	/* XIVE domain data is cleared through ->msi_free() */
+	irq_domain_free_irqs_parent(domain, virq, nr_irqs);
 }
 
 static const struct irq_domain_ops pseries_irq_domain_ops = {
+	.select	= msi_lib_irq_domain_select,
 	.alloc  = pseries_irq_domain_alloc,
 	.free   = pseries_irq_domain_free,
 };
@@ -617,30 +599,18 @@ static int __pseries_msi_allocate_domains(struct pci_controller *phb,
 					  unsigned int count)
 {
 	struct irq_domain *parent = irq_get_default_domain();
-
-	phb->fwnode = irq_domain_alloc_named_id_fwnode("pSeries-MSI",
-						       phb->global_number);
-	if (!phb->fwnode)
-		return -ENOMEM;
-
-	phb->dev_domain = irq_domain_create_hierarchy(parent, 0, count,
-						      phb->fwnode,
-						      &pseries_irq_domain_ops, phb);
+	struct irq_domain_info info = {
+		.fwnode		= of_fwnode_handle(phb->dn),
+		.ops		= &pseries_irq_domain_ops,
+		.host_data	= phb,
+		.size		= count,
+		.parent		= parent,
+	};
+
+	phb->dev_domain = msi_create_parent_irq_domain(&info, &pseries_msi_parent_ops);
 	if (!phb->dev_domain) {
-		pr_err("PCI: failed to create IRQ domain bridge %pOF (domain %d)\n",
-		       phb->dn, phb->global_number);
-		irq_domain_free_fwnode(phb->fwnode);
-		return -ENOMEM;
-	}
-
-	phb->msi_domain = pci_msi_create_irq_domain(of_fwnode_handle(phb->dn),
-						    &pseries_msi_domain_info,
-						    phb->dev_domain);
-	if (!phb->msi_domain) {
 		pr_err("PCI: failed to create MSI IRQ domain bridge %pOF (domain %d)\n",
 		       phb->dn, phb->global_number);
-		irq_domain_free_fwnode(phb->fwnode);
-		irq_domain_remove(phb->dev_domain);
 		return -ENOMEM;
 	}
 
@@ -662,12 +632,8 @@ int pseries_msi_allocate_domains(struct pci_controller *phb)
 
 void pseries_msi_free_domains(struct pci_controller *phb)
 {
-	if (phb->msi_domain)
-		irq_domain_remove(phb->msi_domain);
 	if (phb->dev_domain)
 		irq_domain_remove(phb->dev_domain);
-	if (phb->fwnode)
-		irq_domain_free_fwnode(phb->fwnode);
 }
 
 static void rtas_msi_pci_irq_fixup(struct pci_dev *pdev)
diff --git a/arch/powerpc/platforms/pseries/papr-hvpipe.c b/arch/powerpc/platforms/pseries/papr-hvpipe.c
new file mode 100644
index 000000000000..21a2f447c43f
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/papr-hvpipe.c
@@ -0,0 +1,818 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#define pr_fmt(fmt) "papr-hvpipe: " fmt
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/delay.h>
+#include <linux/anon_inodes.h>
+#include <linux/miscdevice.h>
+#include <linux/file.h>
+#include <linux/fs.h>
+#include <linux/poll.h>
+#include <linux/of.h>
+#include <asm/machdep.h>
+#include <asm/rtas.h>
+#include <asm/rtas-work-area.h>
+#include <asm/papr-sysparm.h>
+#include <uapi/asm/papr-hvpipe.h>
+#include "pseries.h"
+#include "papr-hvpipe.h"
+
+static DEFINE_SPINLOCK(hvpipe_src_list_lock);
+static LIST_HEAD(hvpipe_src_list);
+
+static unsigned char hvpipe_ras_buf[RTAS_ERROR_LOG_MAX];
+static struct workqueue_struct *papr_hvpipe_wq;
+static struct work_struct *papr_hvpipe_work;
+static int hvpipe_check_exception_token;
+static bool hvpipe_feature;
+
+/*
+ * New PowerPC FW provides support for partitions and various
+ * sources (Ex: remote hardware management console (HMC)) to
+ * exchange information through an inband hypervisor channel
+ * called HVPIPE. Only HMCs are supported right now and
+ * partitions can communicate with multiple HMCs and each
+ * source represented by source ID.
+ *
+ * FW introduces send HVPIPE and recv HVPIPE RTAS calls for
+ * partitions to send and receive payloads respectively.
+ *
+ * These RTAS functions have the following certain requirements
+ * / limitations:
+ * - One hvpipe per partition for all sources.
+ * - Assume the return status of send HVPIPE as delivered to source
+ * - Assume the return status of recv HVPIPE as ACK to source
+ * - Generates HVPIPE event message when the payload is ready
+ *   for the partition. The hypervisor will not deliver another
+ *   event until the partition read the previous payload which
+ *   means the pipe is blocked for any sources.
+ *
+ * Linux implementation:
+ * Follow the similar interfaces that the OS has for other RTAS calls.
+ * ex: /dev/papr-indices, /dev/papr-vpd, etc.
+ * - /dev/papr-hvpipe is available for the user space.
+ * - devfd = open("/dev/papr-hvpipe", ..)
+ * - fd = ioctl(fd,HVPIPE_IOC_CREATE_HANDLE,&srcID)-for each source
+ * - write(fd, buf, size) --> Issue send HVPIPE RTAS call and
+ *   returns size for success or the corresponding error for RTAS
+ *   return code for failure.
+ * - poll(fd,..) -> wakeup FD if the payload is available to read.
+ *   HVPIPE event message handler wakeup FD based on source ID in
+ *   the event message
+ * - read(fd, buf, size) --> Issue recv HVPIPE RTAS call and
+ *   returns size for success or the corresponding error for RTAS
+ *   return code for failure.
+ */
+
+/*
+ * ibm,receive-hvpipe-msg RTAS call.
+ * @area: Caller-provided work area buffer for results.
+ * @srcID: Source ID returned by the RTAS call.
+ * @bytesw: Bytes written by RTAS call to @area.
+ */
+static int rtas_ibm_receive_hvpipe_msg(struct rtas_work_area *area,
+					u32 *srcID, u32 *bytesw)
+{
+	const s32 token = rtas_function_token(RTAS_FN_IBM_RECEIVE_HVPIPE_MSG);
+	u32 rets[2];
+	s32 fwrc;
+	int ret;
+
+	if (token == RTAS_UNKNOWN_SERVICE)
+		return -ENOENT;
+
+	do {
+		fwrc = rtas_call(token, 2, 3, rets,
+				rtas_work_area_phys(area),
+				rtas_work_area_size(area));
+
+	} while (rtas_busy_delay(fwrc));
+
+	switch (fwrc) {
+	case RTAS_SUCCESS:
+		*srcID = rets[0];
+		*bytesw = rets[1];
+		ret = 0;
+		break;
+	case RTAS_HARDWARE_ERROR:
+		ret = -EIO;
+		break;
+	case RTAS_INVALID_PARAMETER:
+		ret = -EINVAL;
+		break;
+	case RTAS_FUNC_NOT_SUPPORTED:
+		ret = -EOPNOTSUPP;
+		break;
+	default:
+		ret = -EIO;
+		pr_err_ratelimited("unexpected ibm,receive-hvpipe-msg status %d\n", fwrc);
+		break;
+	}
+
+	return ret;
+}
+
+/*
+ * ibm,send-hvpipe-msg RTAS call
+ * @area: Caller-provided work area buffer to send.
+ * @srcID: Target source for the send pipe message.
+ */
+static int rtas_ibm_send_hvpipe_msg(struct rtas_work_area *area, u32 srcID)
+{
+	const s32 token = rtas_function_token(RTAS_FN_IBM_SEND_HVPIPE_MSG);
+	s32 fwrc;
+	int ret;
+
+	if (token == RTAS_UNKNOWN_SERVICE)
+		return -ENOENT;
+
+	do {
+		fwrc = rtas_call(token, 2, 1, NULL, srcID,
+				rtas_work_area_phys(area));
+
+	} while (rtas_busy_delay(fwrc));
+
+	switch (fwrc) {
+	case RTAS_SUCCESS:
+		ret = 0;
+		break;
+	case RTAS_HARDWARE_ERROR:
+		ret = -EIO;
+		break;
+	case RTAS_INVALID_PARAMETER:
+		ret = -EINVAL;
+		break;
+	case RTAS_HVPIPE_CLOSED:
+		ret = -EPIPE;
+		break;
+	case RTAS_FUNC_NOT_SUPPORTED:
+		ret = -EOPNOTSUPP;
+		break;
+	default:
+		ret = -EIO;
+		pr_err_ratelimited("unexpected ibm,receive-hvpipe-msg status %d\n", fwrc);
+		break;
+	}
+
+	return ret;
+}
+
+static struct hvpipe_source_info *hvpipe_find_source(u32 srcID)
+{
+	struct hvpipe_source_info *src_info;
+
+	list_for_each_entry(src_info, &hvpipe_src_list, list)
+		if (src_info->srcID == srcID)
+			return src_info;
+
+	return NULL;
+}
+
+/*
+ * This work function collects receive buffer with recv HVPIPE
+ * RTAS call. Called from read()
+ * @buf: User specified buffer to copy the payload that returned
+ *       from recv HVPIPE RTAS.
+ * @size: Size of buffer user passed.
+ */
+static int hvpipe_rtas_recv_msg(char __user *buf, int size)
+{
+	struct rtas_work_area *work_area;
+	u32 srcID, bytes_written;
+	int ret;
+
+	work_area = rtas_work_area_alloc(SZ_4K);
+	if (!work_area) {
+		pr_err("Could not allocate RTAS buffer for recv pipe\n");
+		return -ENOMEM;
+	}
+
+	ret = rtas_ibm_receive_hvpipe_msg(work_area, &srcID,
+					&bytes_written);
+	if (!ret) {
+		/*
+		 * Recv HVPIPE RTAS is successful.
+		 * When releasing FD or no one is waiting on the
+		 * specific source, issue recv HVPIPE RTAS call
+		 * so that pipe is not blocked - this func is called
+		 * with NULL buf.
+		 */
+		if (buf) {
+			if (size < bytes_written) {
+				pr_err("Received the payload size = %d, but the buffer size = %d\n",
+					bytes_written, size);
+				bytes_written = size;
+			}
+			ret = copy_to_user(buf,
+					rtas_work_area_raw_buf(work_area),
+					bytes_written);
+			if (!ret)
+				ret = bytes_written;
+		}
+	} else {
+		pr_err("ibm,receive-hvpipe-msg failed with %d\n",
+				ret);
+	}
+
+	rtas_work_area_free(work_area);
+	return ret;
+}
+
+/*
+ * papr_hvpipe_handle_write -  Issue send HVPIPE RTAS and return
+ * the size (payload + HVPIPE_HDR_LEN) for RTAS success.
+ * Otherwise returns the status of RTAS to the user space
+ */
+static ssize_t papr_hvpipe_handle_write(struct file *file,
+	const char __user *buf, size_t size, loff_t *off)
+{
+	struct hvpipe_source_info *src_info = file->private_data;
+	struct rtas_work_area *work_area, *work_buf;
+	unsigned long ret, len;
+	__be64 *area_be;
+
+	/*
+	 * Return -ENXIO during migration
+	 */
+	if (!hvpipe_feature)
+		return -ENXIO;
+
+	if (!src_info)
+		return -EIO;
+
+	/*
+	 * Send HVPIPE RTAS is used to send payload to the specific
+	 * source with the input parameters source ID and the payload
+	 * as buffer list. Each entry in the buffer list contains
+	 * address/length pair of the buffer.
+	 *
+	 * The buffer list format is as follows:
+	 *
+	 * Header (length of address/length pairs and the header length)
+	 * Address of 4K buffer 1
+	 * Length of 4K buffer 1 used
+	 * ...
+	 * Address of 4K buffer n
+	 * Length of 4K buffer n used
+	 *
+	 * See PAPR 7.3.32.2 ibm,send-hvpipe-msg
+	 *
+	 * Even though can support max 1MB payload, the hypervisor
+	 * supports only 4048 bytes payload at present and also
+	 * just one address/length entry.
+	 *
+	 * writev() interface can be added in future when the
+	 * hypervisor supports multiple buffer list entries.
+	 */
+	/* HVPIPE_MAX_WRITE_BUFFER_SIZE = 4048 bytes */
+	if ((size > (HVPIPE_HDR_LEN + HVPIPE_MAX_WRITE_BUFFER_SIZE)) ||
+		(size <= HVPIPE_HDR_LEN))
+		return -EINVAL;
+
+	/*
+	 * The length of (address + length) pair + the length of header
+	 */
+	len = (2 * sizeof(u64)) + sizeof(u64);
+	size -= HVPIPE_HDR_LEN;
+	buf += HVPIPE_HDR_LEN;
+	mutex_lock(&rtas_ibm_send_hvpipe_msg_lock);
+	work_area = rtas_work_area_alloc(SZ_4K);
+	if (!work_area) {
+		ret = -ENOMEM;
+		goto out;
+	}
+	area_be = (__be64 *)rtas_work_area_raw_buf(work_area);
+	/* header */
+	area_be[0] = cpu_to_be64(len);
+
+	work_buf = rtas_work_area_alloc(SZ_4K);
+	if (!work_buf) {
+		ret = -ENOMEM;
+		goto out_work;
+	}
+	/* First buffer address */
+	area_be[1] = cpu_to_be64(rtas_work_area_phys(work_buf));
+	/* First buffer address length */
+	area_be[2] = cpu_to_be64(size);
+
+	if (!copy_from_user(rtas_work_area_raw_buf(work_buf), buf, size)) {
+		ret = rtas_ibm_send_hvpipe_msg(work_area, src_info->srcID);
+		if (!ret)
+			ret = size + HVPIPE_HDR_LEN;
+	} else
+		ret = -EPERM;
+
+	rtas_work_area_free(work_buf);
+out_work:
+	rtas_work_area_free(work_area);
+out:
+	mutex_unlock(&rtas_ibm_send_hvpipe_msg_lock);
+	return ret;
+}
+
+/*
+ * papr_hvpipe_handle_read - If the payload for the specific
+ * source is pending in the hypervisor, issue recv HVPIPE RTAS
+ * and return the payload to the user space.
+ *
+ * When the payload is available for the partition, the
+ * hypervisor notifies HVPIPE event with the source ID
+ * and the event handler wakeup FD(s) that are waiting.
+ */
+static ssize_t papr_hvpipe_handle_read(struct file *file,
+		char __user *buf, size_t size, loff_t *off)
+{
+
+	struct hvpipe_source_info *src_info = file->private_data;
+	struct papr_hvpipe_hdr hdr;
+	long ret;
+
+	/*
+	 * Return -ENXIO during migration
+	 */
+	if (!hvpipe_feature)
+		return -ENXIO;
+
+	if (!src_info)
+		return -EIO;
+
+	/*
+	 * Max payload is 4048 (HVPIPE_MAX_WRITE_BUFFER_SIZE)
+	 */
+	if ((size > (HVPIPE_HDR_LEN + HVPIPE_MAX_WRITE_BUFFER_SIZE)) ||
+		(size < HVPIPE_HDR_LEN))
+		return -EINVAL;
+
+	/*
+	 * Payload is not available to receive or source pipe
+	 * is not closed.
+	 */
+	if (!src_info->hvpipe_status)
+		return 0;
+
+	hdr.version = 0;
+	hdr.flags = 0;
+
+	/*
+	 * In case if the hvpipe has payload and also the
+	 * hypervisor closed the pipe to the source, retrieve
+	 * the payload and return to the user space first and
+	 * then notify the userspace about the hvpipe close in
+	 * next read().
+	 */
+	if (src_info->hvpipe_status & HVPIPE_MSG_AVAILABLE)
+		hdr.flags = HVPIPE_MSG_AVAILABLE;
+	else if (src_info->hvpipe_status & HVPIPE_LOST_CONNECTION)
+		hdr.flags = HVPIPE_LOST_CONNECTION;
+	else
+		/*
+		 * Should not be here without one of the above
+		 * flags set
+		 */
+		return -EIO;
+
+	ret = copy_to_user(buf, &hdr, HVPIPE_HDR_LEN);
+	if (ret)
+		return ret;
+
+	/*
+	 * Message event has payload, so get the payload with
+	 * recv HVPIPE RTAS.
+	 */
+	if (hdr.flags & HVPIPE_MSG_AVAILABLE) {
+		ret = hvpipe_rtas_recv_msg(buf + HVPIPE_HDR_LEN,
+				size - HVPIPE_HDR_LEN);
+		if (ret > 0) {
+			src_info->hvpipe_status &= ~HVPIPE_MSG_AVAILABLE;
+			ret += HVPIPE_HDR_LEN;
+		}
+	} else if (hdr.flags & HVPIPE_LOST_CONNECTION) {
+		/*
+		 * Hypervisor is closing the pipe for the specific
+		 * source. So notify user space.
+		 */
+		src_info->hvpipe_status &= ~HVPIPE_LOST_CONNECTION;
+		ret = HVPIPE_HDR_LEN;
+	}
+
+	return ret;
+}
+
+/*
+ * The user space waits for the payload to receive.
+ * The hypervisor sends HVPIPE event message to the partition
+ * when the payload is available. The event handler wakeup FD
+ * depends on the source ID in the message event.
+ */
+static __poll_t papr_hvpipe_handle_poll(struct file *filp,
+		struct poll_table_struct *wait)
+{
+	struct hvpipe_source_info *src_info = filp->private_data;
+
+	/*
+	 * HVPIPE is disabled during SUSPEND and enabled after migration.
+	 * So return POLLRDHUP during migration
+	 */
+	if (!hvpipe_feature)
+		return POLLRDHUP;
+
+	if (!src_info)
+		return POLLNVAL;
+
+	/*
+	 * If hvpipe already has pending payload, return so that
+	 * the user space can issue read().
+	 */
+	if (src_info->hvpipe_status)
+		return POLLIN | POLLRDNORM;
+
+	/*
+	 * Wait for the message event
+	 * hvpipe_event_interrupt() wakes up this wait_queue
+	 */
+	poll_wait(filp, &src_info->recv_wqh, wait);
+	if (src_info->hvpipe_status)
+		return POLLIN | POLLRDNORM;
+
+	return 0;
+}
+
+static int papr_hvpipe_handle_release(struct inode *inode,
+				struct file *file)
+{
+	struct hvpipe_source_info *src_info;
+
+	/*
+	 * Hold the lock, remove source from src_list, reset the
+	 * hvpipe status and release the lock to prevent any race
+	 * with message event IRQ.
+	 */
+	spin_lock(&hvpipe_src_list_lock);
+	src_info = file->private_data;
+	list_del(&src_info->list);
+	file->private_data = NULL;
+	/*
+	 * If the pipe for this specific source has any pending
+	 * payload, issue recv HVPIPE RTAS so that pipe will not
+	 * be blocked.
+	 */
+	if (src_info->hvpipe_status & HVPIPE_MSG_AVAILABLE) {
+		src_info->hvpipe_status = 0;
+		spin_unlock(&hvpipe_src_list_lock);
+		hvpipe_rtas_recv_msg(NULL, 0);
+	} else
+		spin_unlock(&hvpipe_src_list_lock);
+
+	kfree(src_info);
+	return 0;
+}
+
+static const struct file_operations papr_hvpipe_handle_ops = {
+	.read		=	papr_hvpipe_handle_read,
+	.write		=	papr_hvpipe_handle_write,
+	.release	=	papr_hvpipe_handle_release,
+	.poll		=	papr_hvpipe_handle_poll,
+};
+
+static int papr_hvpipe_dev_create_handle(u32 srcID)
+{
+	struct hvpipe_source_info *src_info;
+	struct file *file;
+	long err;
+	int fd;
+
+	spin_lock(&hvpipe_src_list_lock);
+	/*
+	 * Do not allow more than one process communicates with
+	 * each source.
+	 */
+	src_info = hvpipe_find_source(srcID);
+	if (src_info) {
+		spin_unlock(&hvpipe_src_list_lock);
+		pr_err("pid(%d) is already using the source(%d)\n",
+				src_info->tsk->pid, srcID);
+		return -EALREADY;
+	}
+	spin_unlock(&hvpipe_src_list_lock);
+
+	src_info = kzalloc(sizeof(*src_info), GFP_KERNEL_ACCOUNT);
+	if (!src_info)
+		return -ENOMEM;
+
+	src_info->srcID = srcID;
+	src_info->tsk = current;
+	init_waitqueue_head(&src_info->recv_wqh);
+
+	fd = get_unused_fd_flags(O_RDONLY | O_CLOEXEC);
+	if (fd < 0) {
+		err = fd;
+		goto free_buf;
+	}
+
+	file = anon_inode_getfile("[papr-hvpipe]",
+			&papr_hvpipe_handle_ops, (void *)src_info,
+			O_RDWR);
+	if (IS_ERR(file)) {
+		err = PTR_ERR(file);
+		goto free_fd;
+	}
+
+	spin_lock(&hvpipe_src_list_lock);
+	/*
+	 * If two processes are executing ioctl() for the same
+	 * source ID concurrently, prevent the second process to
+	 * acquire FD.
+	 */
+	if (hvpipe_find_source(srcID)) {
+		spin_unlock(&hvpipe_src_list_lock);
+		err = -EALREADY;
+		goto free_file;
+	}
+	list_add(&src_info->list, &hvpipe_src_list);
+	spin_unlock(&hvpipe_src_list_lock);
+
+	fd_install(fd, file);
+	return fd;
+
+free_file:
+	fput(file);
+free_fd:
+	put_unused_fd(fd);
+free_buf:
+	kfree(src_info);
+	return err;
+}
+
+/*
+ * Top-level ioctl handler for /dev/papr_hvpipe
+ *
+ * Use separate FD for each source (exa :HMC). So ioctl is called
+ * with source ID which returns FD.
+ */
+static long papr_hvpipe_dev_ioctl(struct file *filp, unsigned int ioctl,
+		unsigned long arg)
+{
+	u32 __user *argp = (void __user *)arg;
+	u32 srcID;
+	long ret;
+
+	/*
+	 * Return -ENXIO during migration
+	 */
+	if (!hvpipe_feature)
+		return -ENXIO;
+
+	if (get_user(srcID, argp))
+		return -EFAULT;
+
+	/*
+	 * Support only HMC source right now
+	 */
+	if (!(srcID & HVPIPE_HMC_ID_MASK))
+		return -EINVAL;
+
+	switch (ioctl) {
+	case PAPR_HVPIPE_IOC_CREATE_HANDLE:
+		ret = papr_hvpipe_dev_create_handle(srcID);
+		break;
+	default:
+		ret = -ENOIOCTLCMD;
+		break;
+	}
+
+	return ret;
+}
+
+/*
+ * papr_hvpipe_work_fn - called to issue recv HVPIPE RTAS for
+ * sources that are not monitored by user space so that pipe
+ * will not be blocked.
+ */
+static void papr_hvpipe_work_fn(struct work_struct *work)
+{
+	hvpipe_rtas_recv_msg(NULL, 0);
+}
+
+/*
+ * HVPIPE event message IRQ handler.
+ * The hypervisor sends event IRQ if the partition has payload
+ * and generates another event only after payload is read with
+ * recv HVPIPE RTAS.
+ */
+static irqreturn_t hvpipe_event_interrupt(int irq, void *dev_id)
+{
+	struct hvpipe_event_buf *hvpipe_event;
+	struct pseries_errorlog *pseries_log;
+	struct hvpipe_source_info *src_info;
+	struct rtas_error_log *elog;
+	int rc;
+
+	rc = rtas_call(hvpipe_check_exception_token, 6, 1, NULL,
+		RTAS_VECTOR_EXTERNAL_INTERRUPT, virq_to_hw(irq),
+		RTAS_HVPIPE_MSG_EVENTS, 1, __pa(&hvpipe_ras_buf),
+		rtas_get_error_log_max());
+
+	if (rc != 0) {
+		pr_err_ratelimited("unexpected hvpipe-event-notification failed %d\n", rc);
+		return IRQ_HANDLED;
+	}
+
+	elog = (struct rtas_error_log *)hvpipe_ras_buf;
+	if (unlikely(rtas_error_type(elog) != RTAS_TYPE_HVPIPE)) {
+		pr_warn_ratelimited("Unexpected event type %d\n",
+				rtas_error_type(elog));
+		return IRQ_HANDLED;
+	}
+
+	pseries_log = get_pseries_errorlog(elog,
+				PSERIES_ELOG_SECT_ID_HVPIPE_EVENT);
+	hvpipe_event = (struct hvpipe_event_buf *)pseries_log->data;
+
+	/*
+	 * The hypervisor notifies partition when the payload is
+	 * available to read with recv HVPIPE RTAS and it will not
+	 * notify another event for any source until the previous
+	 * payload is read. Means the pipe is blocked in the
+	 * hypervisor until the payload is read.
+	 *
+	 * If the source is ready to accept payload and wakeup the
+	 * corresponding FD. Hold lock and update hvpipe_status
+	 * and this lock is needed in case the user space process
+	 * is in release FD instead of poll() so that release()
+	 * reads the payload to unblock pipe before closing FD.
+	 *
+	 * otherwise (means no other user process waiting for the
+	 * payload, issue recv HVPIPE RTAS (papr_hvpipe_work_fn())
+	 * to unblock pipe.
+	 */
+	spin_lock(&hvpipe_src_list_lock);
+	src_info = hvpipe_find_source(be32_to_cpu(hvpipe_event->srcID));
+	if (src_info) {
+		u32 flags = 0;
+
+		if (hvpipe_event->event_type & HVPIPE_LOST_CONNECTION)
+			flags = HVPIPE_LOST_CONNECTION;
+		else if (hvpipe_event->event_type & HVPIPE_MSG_AVAILABLE)
+			flags = HVPIPE_MSG_AVAILABLE;
+
+		src_info->hvpipe_status |= flags;
+		wake_up(&src_info->recv_wqh);
+		spin_unlock(&hvpipe_src_list_lock);
+	} else {
+		spin_unlock(&hvpipe_src_list_lock);
+		/*
+		 * user space is not waiting on this source. So
+		 * execute receive pipe RTAS so that pipe will not
+		 * be blocked.
+		 */
+		if (hvpipe_event->event_type & HVPIPE_MSG_AVAILABLE)
+			queue_work(papr_hvpipe_wq, papr_hvpipe_work);
+	}
+
+	return IRQ_HANDLED;
+}
+
+/*
+ * Enable hvpipe by system parameter set with parameter
+ * token = 64 and with 1 byte buffer data:
+ * 0 = hvpipe not in use/disable
+ * 1 = hvpipe in use/enable
+ */
+static int set_hvpipe_sys_param(u8 val)
+{
+	struct papr_sysparm_buf *buf;
+	int ret;
+
+	buf = papr_sysparm_buf_alloc();
+	if (!buf)
+		return -ENOMEM;
+
+	buf->len = cpu_to_be16(1);
+	buf->val[0] = val;
+	ret = papr_sysparm_set(PAPR_SYSPARM_HVPIPE_ENABLE, buf);
+	if (ret)
+		pr_err("Can not enable hvpipe %d\n", ret);
+
+	papr_sysparm_buf_free(buf);
+
+	return ret;
+}
+
+static int __init enable_hvpipe_IRQ(void)
+{
+	struct device_node *np;
+
+	hvpipe_check_exception_token = rtas_function_token(RTAS_FN_CHECK_EXCEPTION);
+	if (hvpipe_check_exception_token  == RTAS_UNKNOWN_SERVICE)
+		return -ENODEV;
+
+	/* hvpipe events */
+	np = of_find_node_by_path("/event-sources/ibm,hvpipe-msg-events");
+	if (np != NULL) {
+		request_event_sources_irqs(np, hvpipe_event_interrupt,
+					"HPIPE_EVENT");
+		of_node_put(np);
+	} else {
+		pr_err("Can not enable hvpipe event IRQ\n");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+void hvpipe_migration_handler(int action)
+{
+	pr_info("hvpipe migration event %d\n", action);
+
+	/*
+	 * HVPIPE is not used (Failed to create /dev/papr-hvpipe).
+	 * So nothing to do for migration.
+	 */
+	if (!papr_hvpipe_work)
+		return;
+
+	switch (action) {
+	case HVPIPE_SUSPEND:
+		if (hvpipe_feature) {
+			/*
+			 * Disable hvpipe_feature to the user space.
+			 * It will be enabled with RESUME event.
+			 */
+			hvpipe_feature = false;
+			/*
+			 * set system parameter hvpipe 'disable'
+			 */
+			set_hvpipe_sys_param(0);
+		}
+		break;
+	case HVPIPE_RESUME:
+		/*
+		 * set system parameter hvpipe 'enable'
+		 */
+		if (!set_hvpipe_sys_param(1))
+			hvpipe_feature = true;
+		else
+			pr_err("hvpipe is not enabled after migration\n");
+
+		break;
+	}
+}
+
+static const struct file_operations papr_hvpipe_ops = {
+	.unlocked_ioctl	=	papr_hvpipe_dev_ioctl,
+};
+
+static struct miscdevice papr_hvpipe_dev = {
+	.minor	=	MISC_DYNAMIC_MINOR,
+	.name	=	"papr-hvpipe",
+	.fops	=	&papr_hvpipe_ops,
+};
+
+static int __init papr_hvpipe_init(void)
+{
+	int ret;
+
+	if (!of_find_property(rtas.dev, "ibm,hypervisor-pipe-capable",
+		NULL))
+		return -ENODEV;
+
+	if (!rtas_function_implemented(RTAS_FN_IBM_SEND_HVPIPE_MSG) ||
+		!rtas_function_implemented(RTAS_FN_IBM_RECEIVE_HVPIPE_MSG))
+		return -ENODEV;
+
+	papr_hvpipe_work = kzalloc(sizeof(struct work_struct), GFP_ATOMIC);
+	if (!papr_hvpipe_work)
+		return -ENOMEM;
+
+	INIT_WORK(papr_hvpipe_work, papr_hvpipe_work_fn);
+
+	papr_hvpipe_wq = alloc_ordered_workqueue("papr hvpipe workqueue", 0);
+	if (!papr_hvpipe_wq) {
+		ret = -ENOMEM;
+		goto out;
+	}
+
+	ret = enable_hvpipe_IRQ();
+	if (!ret) {
+		ret = set_hvpipe_sys_param(1);
+		if (!ret)
+			ret = misc_register(&papr_hvpipe_dev);
+	}
+
+	if (!ret) {
+		pr_info("hvpipe feature is enabled\n");
+		hvpipe_feature = true;
+		return 0;
+	}
+
+	pr_err("hvpipe feature is not enabled %d\n", ret);
+	destroy_workqueue(papr_hvpipe_wq);
+out:
+	kfree(papr_hvpipe_work);
+	papr_hvpipe_work = NULL;
+	return ret;
+}
+machine_device_initcall(pseries, papr_hvpipe_init);
diff --git a/arch/powerpc/platforms/pseries/papr-hvpipe.h b/arch/powerpc/platforms/pseries/papr-hvpipe.h
new file mode 100644
index 000000000000..c343f4230865
--- /dev/null
+++ b/arch/powerpc/platforms/pseries/papr-hvpipe.h
@@ -0,0 +1,42 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef _PAPR_HVPIPE_H
+#define _PAPR_HVPIPE_H
+
+#define	HVPIPE_HMC_ID_MASK	0x02000000 /*02-HMC,00-reserved and HMC ID */
+#define	HVPIPE_MAX_WRITE_BUFFER_SIZE	4048
+/*
+ * hvpipe specific RTAS return values
+ */
+#define	RTAS_HVPIPE_CLOSED		-4
+
+#define	HVPIPE_HDR_LEN	sizeof(struct papr_hvpipe_hdr)
+
+enum hvpipe_migrate_action {
+	HVPIPE_SUSPEND,
+	HVPIPE_RESUME,
+};
+
+struct hvpipe_source_info {
+	struct list_head list;	/* list of sources */
+	u32 srcID;
+	u32 hvpipe_status;
+	wait_queue_head_t recv_wqh;	 /* wake up poll() waitq */
+	struct task_struct *tsk;
+};
+
+/*
+ * Source ID Format 0xCCRRQQQQ
+ * CC = indicating value is source type (ex: 0x02 for HMC)
+ * RR = 0x00 (reserved)
+ * QQQQ = 0x0000 – 0xFFFF indicating the source index indetifier
+ */
+struct hvpipe_event_buf {
+	__be32	srcID;		/* Source ID */
+	u8	event_type;	/* 0x01 for hvpipe message available */
+				/* from specified src ID */
+				/* 0x02 for loss of pipe connection */
+				/* with specified src ID */
+};
+
+void hvpipe_migration_handler(int action);
+#endif /* _PAPR_HVPIPE_H */
diff --git a/arch/powerpc/sysdev/cpm_common.c b/arch/powerpc/sysdev/cpm_common.c
index f469f6a9f6e0..07ea605ab0e6 100644
--- a/arch/powerpc/sysdev/cpm_common.c
+++ b/arch/powerpc/sysdev/cpm_common.c
@@ -28,10 +28,6 @@
 
 #include <mm/mmu_decl.h>
 
-#if defined(CONFIG_CPM2) || defined(CONFIG_8xx_GPIO)
-#include <linux/gpio/legacy-of-mm-gpiochip.h>
-#endif
-
 static int __init cpm_init(void)
 {
 	struct device_node *np;
@@ -91,32 +87,33 @@ void __init udbg_init_cpm(void)
 
 #if defined(CONFIG_CPM2) || defined(CONFIG_8xx_GPIO)
 
+#include <linux/gpio/driver.h>
+
 struct cpm2_ioports {
 	u32 dir, par, sor, odr, dat;
 	u32 res[3];
 };
 
 struct cpm2_gpio32_chip {
-	struct of_mm_gpio_chip mm_gc;
+	struct gpio_chip gc;
+	void __iomem *regs;
 	spinlock_t lock;
 
 	/* shadowed data register to clear/set bits safely */
 	u32 cpdata;
 };
 
-static void cpm2_gpio32_save_regs(struct of_mm_gpio_chip *mm_gc)
+static void cpm2_gpio32_save_regs(struct cpm2_gpio32_chip *cpm2_gc)
 {
-	struct cpm2_gpio32_chip *cpm2_gc =
-		container_of(mm_gc, struct cpm2_gpio32_chip, mm_gc);
-	struct cpm2_ioports __iomem *iop = mm_gc->regs;
+	struct cpm2_ioports __iomem *iop = cpm2_gc->regs;
 
 	cpm2_gc->cpdata = in_be32(&iop->dat);
 }
 
 static int cpm2_gpio32_get(struct gpio_chip *gc, unsigned int gpio)
 {
-	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
-	struct cpm2_ioports __iomem *iop = mm_gc->regs;
+	struct cpm2_gpio32_chip *cpm2_gc = gpiochip_get_data(gc);
+	struct cpm2_ioports __iomem *iop = cpm2_gc->regs;
 	u32 pin_mask;
 
 	pin_mask = 1 << (31 - gpio);
@@ -124,11 +121,9 @@ static int cpm2_gpio32_get(struct gpio_chip *gc, unsigned int gpio)
 	return !!(in_be32(&iop->dat) & pin_mask);
 }
 
-static void __cpm2_gpio32_set(struct of_mm_gpio_chip *mm_gc, u32 pin_mask,
-	int value)
+static void __cpm2_gpio32_set(struct cpm2_gpio32_chip *cpm2_gc, u32 pin_mask, int value)
 {
-	struct cpm2_gpio32_chip *cpm2_gc = gpiochip_get_data(&mm_gc->gc);
-	struct cpm2_ioports __iomem *iop = mm_gc->regs;
+	struct cpm2_ioports __iomem *iop = cpm2_gc->regs;
 
 	if (value)
 		cpm2_gc->cpdata |= pin_mask;
@@ -140,14 +135,13 @@ static void __cpm2_gpio32_set(struct of_mm_gpio_chip *mm_gc, u32 pin_mask,
 
 static int cpm2_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
 {
-	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
 	struct cpm2_gpio32_chip *cpm2_gc = gpiochip_get_data(gc);
 	unsigned long flags;
 	u32 pin_mask = 1 << (31 - gpio);
 
 	spin_lock_irqsave(&cpm2_gc->lock, flags);
 
-	__cpm2_gpio32_set(mm_gc, pin_mask, value);
+	__cpm2_gpio32_set(cpm2_gc, pin_mask, value);
 
 	spin_unlock_irqrestore(&cpm2_gc->lock, flags);
 
@@ -156,16 +150,15 @@ static int cpm2_gpio32_set(struct gpio_chip *gc, unsigned int gpio, int value)
 
 static int cpm2_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
 {
-	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
 	struct cpm2_gpio32_chip *cpm2_gc = gpiochip_get_data(gc);
-	struct cpm2_ioports __iomem *iop = mm_gc->regs;
+	struct cpm2_ioports __iomem *iop = cpm2_gc->regs;
 	unsigned long flags;
 	u32 pin_mask = 1 << (31 - gpio);
 
 	spin_lock_irqsave(&cpm2_gc->lock, flags);
 
 	setbits32(&iop->dir, pin_mask);
-	__cpm2_gpio32_set(mm_gc, pin_mask, val);
+	__cpm2_gpio32_set(cpm2_gc, pin_mask, val);
 
 	spin_unlock_irqrestore(&cpm2_gc->lock, flags);
 
@@ -174,9 +167,8 @@ static int cpm2_gpio32_dir_out(struct gpio_chip *gc, unsigned int gpio, int val)
 
 static int cpm2_gpio32_dir_in(struct gpio_chip *gc, unsigned int gpio)
 {
-	struct of_mm_gpio_chip *mm_gc = to_of_mm_gpio_chip(gc);
 	struct cpm2_gpio32_chip *cpm2_gc = gpiochip_get_data(gc);
-	struct cpm2_ioports __iomem *iop = mm_gc->regs;
+	struct cpm2_ioports __iomem *iop = cpm2_gc->regs;
 	unsigned long flags;
 	u32 pin_mask = 1 << (31 - gpio);
 
@@ -193,19 +185,17 @@ int cpm2_gpiochip_add32(struct device *dev)
 {
 	struct device_node *np = dev->of_node;
 	struct cpm2_gpio32_chip *cpm2_gc;
-	struct of_mm_gpio_chip *mm_gc;
 	struct gpio_chip *gc;
 
-	cpm2_gc = kzalloc(sizeof(*cpm2_gc), GFP_KERNEL);
+	cpm2_gc = devm_kzalloc(dev, sizeof(*cpm2_gc), GFP_KERNEL);
 	if (!cpm2_gc)
 		return -ENOMEM;
 
 	spin_lock_init(&cpm2_gc->lock);
 
-	mm_gc = &cpm2_gc->mm_gc;
-	gc = &mm_gc->gc;
+	gc = &cpm2_gc->gc;
 
-	mm_gc->save_regs = cpm2_gpio32_save_regs;
+	gc->base = -1;
 	gc->ngpio = 32;
 	gc->direction_input = cpm2_gpio32_dir_in;
 	gc->direction_output = cpm2_gpio32_dir_out;
@@ -214,6 +204,16 @@ int cpm2_gpiochip_add32(struct device *dev)
 	gc->parent = dev;
 	gc->owner = THIS_MODULE;
 
-	return of_mm_gpiochip_add_data(np, mm_gc, cpm2_gc);
+	gc->label = devm_kasprintf(dev, GFP_KERNEL, "%pOF", np);
+	if (!gc->label)
+		return -ENOMEM;
+
+	cpm2_gc->regs = devm_of_iomap(dev, np, 0, NULL);
+	if (IS_ERR(cpm2_gc->regs))
+		return PTR_ERR(cpm2_gc->regs);
+
+	cpm2_gpio32_save_regs(cpm2_gc);
+
+	return devm_gpiochip_add_data(dev, gc, cpm2_gc);
 }
 #endif /* CONFIG_CPM2 || CONFIG_8xx_GPIO */
diff --git a/arch/powerpc/sysdev/fsl_msi.c b/arch/powerpc/sysdev/fsl_msi.c
index 4fe8a7b1b288..2a007bfb038d 100644
--- a/arch/powerpc/sysdev/fsl_msi.c
+++ b/arch/powerpc/sysdev/fsl_msi.c
@@ -412,9 +412,8 @@ static int fsl_of_msi_probe(struct platform_device *dev)
 	}
 	platform_set_drvdata(dev, msi);
 
-	msi->irqhost = irq_domain_create_linear(of_fwnode_handle(dev->dev.of_node),
-				      NR_MSI_IRQS_MAX, &fsl_msi_host_ops, msi);
-
+	msi->irqhost = irq_domain_create_linear(dev_fwnode(&dev->dev), NR_MSI_IRQS_MAX,
+						&fsl_msi_host_ops, msi);
 	if (msi->irqhost == NULL) {
 		dev_err(&dev->dev, "No memory for MSI irqhost\n");
 		err = -ENOMEM;
diff --git a/arch/powerpc/sysdev/xive/common.c b/arch/powerpc/sysdev/xive/common.c
index f10592405024..625361a15424 100644
--- a/arch/powerpc/sysdev/xive/common.c
+++ b/arch/powerpc/sysdev/xive/common.c
@@ -317,7 +317,7 @@ int xmon_xive_get_irq_config(u32 hw_irq, struct irq_data *d)
 	if (d) {
 		char buffer[128];
 
-		xive_irq_data_dump(irq_data_get_irq_handler_data(d),
+		xive_irq_data_dump(irq_data_get_irq_chip_data(d),
 				   buffer, sizeof(buffer));
 		xmon_printf("%s", buffer);
 	}
@@ -437,7 +437,7 @@ static void xive_do_source_eoi(struct xive_irq_data *xd)
 /* irq_chip eoi callback, called with irq descriptor lock held */
 static void xive_irq_eoi(struct irq_data *d)
 {
-	struct xive_irq_data *xd = irq_data_get_irq_handler_data(d);
+	struct xive_irq_data *xd = irq_data_get_irq_chip_data(d);
 	struct xive_cpu *xc = __this_cpu_read(xive_cpu);
 
 	DBG_VERBOSE("eoi_irq: irq=%d [0x%lx] pending=%02x\n",
@@ -595,7 +595,7 @@ static int xive_pick_irq_target(struct irq_data *d,
 				const struct cpumask *affinity)
 {
 	static unsigned int fuzz;
-	struct xive_irq_data *xd = irq_data_get_irq_handler_data(d);
+	struct xive_irq_data *xd = irq_data_get_irq_chip_data(d);
 	cpumask_var_t mask;
 	int cpu = -1;
 
@@ -628,7 +628,7 @@ static int xive_pick_irq_target(struct irq_data *d,
 
 static unsigned int xive_irq_startup(struct irq_data *d)
 {
-	struct xive_irq_data *xd = irq_data_get_irq_handler_data(d);
+	struct xive_irq_data *xd = irq_data_get_irq_chip_data(d);
 	unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
 	int target, rc;
 
@@ -673,7 +673,7 @@ static unsigned int xive_irq_startup(struct irq_data *d)
 /* called with irq descriptor lock held */
 static void xive_irq_shutdown(struct irq_data *d)
 {
-	struct xive_irq_data *xd = irq_data_get_irq_handler_data(d);
+	struct xive_irq_data *xd = irq_data_get_irq_chip_data(d);
 	unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
 
 	pr_debug("%s: irq %d [0x%x] data @%p\n", __func__, d->irq, hw_irq, d);
@@ -698,7 +698,7 @@ static void xive_irq_shutdown(struct irq_data *d)
 
 static void xive_irq_unmask(struct irq_data *d)
 {
-	struct xive_irq_data *xd = irq_data_get_irq_handler_data(d);
+	struct xive_irq_data *xd = irq_data_get_irq_chip_data(d);
 
 	pr_debug("%s: irq %d data @%p\n", __func__, d->irq, xd);
 
@@ -707,7 +707,7 @@ static void xive_irq_unmask(struct irq_data *d)
 
 static void xive_irq_mask(struct irq_data *d)
 {
-	struct xive_irq_data *xd = irq_data_get_irq_handler_data(d);
+	struct xive_irq_data *xd = irq_data_get_irq_chip_data(d);
 
 	pr_debug("%s: irq %d data @%p\n", __func__, d->irq, xd);
 
@@ -718,7 +718,7 @@ static int xive_irq_set_affinity(struct irq_data *d,
 				 const struct cpumask *cpumask,
 				 bool force)
 {
-	struct xive_irq_data *xd = irq_data_get_irq_handler_data(d);
+	struct xive_irq_data *xd = irq_data_get_irq_chip_data(d);
 	unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
 	u32 target, old_target;
 	int rc = 0;
@@ -776,7 +776,7 @@ static int xive_irq_set_affinity(struct irq_data *d,
 
 static int xive_irq_set_type(struct irq_data *d, unsigned int flow_type)
 {
-	struct xive_irq_data *xd = irq_data_get_irq_handler_data(d);
+	struct xive_irq_data *xd = irq_data_get_irq_chip_data(d);
 
 	/*
 	 * We only support these. This has really no effect other than setting
@@ -815,7 +815,7 @@ static int xive_irq_set_type(struct irq_data *d, unsigned int flow_type)
 
 static int xive_irq_retrigger(struct irq_data *d)
 {
-	struct xive_irq_data *xd = irq_data_get_irq_handler_data(d);
+	struct xive_irq_data *xd = irq_data_get_irq_chip_data(d);
 
 	/* This should be only for MSIs */
 	if (WARN_ON(xd->flags & XIVE_IRQ_FLAG_LSI))
@@ -837,7 +837,7 @@ static int xive_irq_retrigger(struct irq_data *d)
  */
 static int xive_irq_set_vcpu_affinity(struct irq_data *d, void *state)
 {
-	struct xive_irq_data *xd = irq_data_get_irq_handler_data(d);
+	struct xive_irq_data *xd = irq_data_get_irq_chip_data(d);
 	unsigned int hw_irq = (unsigned int)irqd_to_hwirq(d);
 	int rc;
 	u8 pq;
@@ -951,7 +951,7 @@ static int xive_irq_set_vcpu_affinity(struct irq_data *d, void *state)
 static int xive_get_irqchip_state(struct irq_data *data,
 				  enum irqchip_irq_state which, bool *state)
 {
-	struct xive_irq_data *xd = irq_data_get_irq_handler_data(data);
+	struct xive_irq_data *xd = irq_data_get_irq_chip_data(data);
 	u8 pq;
 
 	switch (which) {
@@ -1011,21 +1011,20 @@ void xive_cleanup_irq_data(struct xive_irq_data *xd)
 }
 EXPORT_SYMBOL_GPL(xive_cleanup_irq_data);
 
-static int xive_irq_alloc_data(unsigned int virq, irq_hw_number_t hw)
+static struct xive_irq_data *xive_irq_alloc_data(unsigned int virq, irq_hw_number_t hw)
 {
 	struct xive_irq_data *xd;
 	int rc;
 
 	xd = kzalloc(sizeof(struct xive_irq_data), GFP_KERNEL);
 	if (!xd)
-		return -ENOMEM;
+		return ERR_PTR(-ENOMEM);
 	rc = xive_ops->populate_irq_data(hw, xd);
 	if (rc) {
 		kfree(xd);
-		return rc;
+		return ERR_PTR(rc);
 	}
 	xd->target = XIVE_INVALID_TARGET;
-	irq_set_handler_data(virq, xd);
 
 	/*
 	 * Turn OFF by default the interrupt being mapped. A side
@@ -1036,20 +1035,19 @@ static int xive_irq_alloc_data(unsigned int virq, irq_hw_number_t hw)
 	 */
 	xive_esb_read(xd, XIVE_ESB_SET_PQ_01);
 
-	return 0;
+	return xd;
 }
 
-void xive_irq_free_data(unsigned int virq)
+static void xive_irq_free_data(unsigned int virq)
 {
-	struct xive_irq_data *xd = irq_get_handler_data(virq);
+	struct xive_irq_data *xd = irq_get_chip_data(virq);
 
 	if (!xd)
 		return;
-	irq_set_handler_data(virq, NULL);
+	irq_set_chip_data(virq, NULL);
 	xive_cleanup_irq_data(xd);
 	kfree(xd);
 }
-EXPORT_SYMBOL_GPL(xive_irq_free_data);
 
 #ifdef CONFIG_SMP
 
@@ -1286,7 +1284,7 @@ void __init xive_smp_probe(void)
 static int xive_irq_domain_map(struct irq_domain *h, unsigned int virq,
 			       irq_hw_number_t hw)
 {
-	int rc;
+	struct xive_irq_data *xd;
 
 	/*
 	 * Mark interrupts as edge sensitive by default so that resend
@@ -1294,11 +1292,12 @@ static int xive_irq_domain_map(struct irq_domain *h, unsigned int virq,
 	 */
 	irq_clear_status_flags(virq, IRQ_LEVEL);
 
-	rc = xive_irq_alloc_data(virq, hw);
-	if (rc)
-		return rc;
+	xd = xive_irq_alloc_data(virq, hw);
+	if (IS_ERR(xd))
+		return PTR_ERR(xd);
 
 	irq_set_chip_and_handler(virq, &xive_irq_chip, handle_fasteoi_irq);
+	irq_set_chip_data(virq, xd);
 
 	return 0;
 }
@@ -1366,7 +1365,7 @@ static void xive_irq_domain_debug_show(struct seq_file *m, struct irq_domain *d,
 	seq_printf(m, "%*sXIVE:\n", ind, "");
 	ind++;
 
-	xd = irq_data_get_irq_handler_data(irqd);
+	xd = irq_data_get_irq_chip_data(irqd);
 	if (!xd) {
 		seq_printf(m, "%*snot assigned\n", ind, "");
 		return;
@@ -1403,6 +1402,7 @@ static int xive_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
 				 unsigned int nr_irqs, void *arg)
 {
 	struct irq_fwspec *fwspec = arg;
+	struct xive_irq_data *xd;
 	irq_hw_number_t hwirq;
 	unsigned int type = IRQ_TYPE_NONE;
 	int i, rc;
@@ -1423,12 +1423,11 @@ static int xive_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
 		irq_clear_status_flags(virq, IRQ_LEVEL);
 
 		/* allocates and sets handler data */
-		rc = xive_irq_alloc_data(virq + i, hwirq + i);
-		if (rc)
-			return rc;
+		xd = xive_irq_alloc_data(virq + i, hwirq + i);
+		if (IS_ERR(xd))
+			return PTR_ERR(xd);
 
-		irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i,
-					      &xive_irq_chip, domain->host_data);
+		irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i, &xive_irq_chip, xd);
 		irq_set_handler(virq + i, handle_fasteoi_irq);
 	}
 
@@ -1764,7 +1763,7 @@ static void xive_debug_show_irq(struct seq_file *m, struct irq_data *d)
 	seq_printf(m, "IRQ 0x%08x : target=0x%x prio=%02x lirq=0x%x ",
 		   hw_irq, target, prio, lirq);
 
-	xive_irq_data_dump(irq_data_get_irq_handler_data(d), buffer, sizeof(buffer));
+	xive_irq_data_dump(irq_data_get_irq_chip_data(d), buffer, sizeof(buffer));
 	seq_puts(m, buffer);
 	seq_puts(m, "\n");
 }
diff --git a/arch/powerpc/xmon/ppc-opc.c b/arch/powerpc/xmon/ppc-opc.c
index 0774d711453e..de9b4236728c 100644
--- a/arch/powerpc/xmon/ppc-opc.c
+++ b/arch/powerpc/xmon/ppc-opc.c
@@ -954,8 +954,7 @@ const struct powerpc_operand powerpc_operands[] =
   { 0xff, 11, NULL, NULL, PPC_OPERAND_SIGNOPT },
 };
 
-const unsigned int num_powerpc_operands = (sizeof (powerpc_operands)
-					   / sizeof (powerpc_operands[0]));
+const unsigned int num_powerpc_operands = ARRAY_SIZE(powerpc_operands);
 
 /* The functions used to insert and extract complicated operands.  */
 
@@ -6968,9 +6967,8 @@ const struct powerpc_opcode powerpc_opcodes[] = {
 {"fcfidu.",	XRC(63,974,1),	XRA_MASK, POWER7|PPCA2,	PPCVLE,		{FRT, FRB}},
 };
 
-const int powerpc_num_opcodes =
-  sizeof (powerpc_opcodes) / sizeof (powerpc_opcodes[0]);
-
+const int powerpc_num_opcodes = ARRAY_SIZE(powerpc_opcodes);
+
 /* The VLE opcode table.
 
    The format of this opcode table is the same as the main opcode table.  */
@@ -7207,9 +7205,8 @@ const struct powerpc_opcode vle_opcodes[] = {
 {"se_bl",	BD8(58,0,1),	BD8_MASK,	PPCVLE,	0,		{B8}},
 };
 
-const int vle_num_opcodes =
-  sizeof (vle_opcodes) / sizeof (vle_opcodes[0]);
-
+const int vle_num_opcodes = ARRAY_SIZE(vle_opcodes);
+
 /* The macro table.  This is only used by the assembler.  */
 
 /* The expressions of the form (-x ! 31) & (x | 31) have the value 0
@@ -7276,5 +7273,4 @@ const struct powerpc_macro powerpc_macros[] = {
 {"e_clrlslwi",4, PPCVLE, "e_rlwinm %0,%1,%3,(%2)-(%3),31-(%3)"},
 };
 
-const int powerpc_num_macros =
-  sizeof (powerpc_macros) / sizeof (powerpc_macros[0]);
+const int powerpc_num_macros = ARRAY_SIZE(powerpc_macros);
diff --git a/arch/powerpc/xmon/xmon_bpts.h b/arch/powerpc/xmon/xmon_bpts.h
index 377068f52edb..e14e4fb862e0 100644
--- a/arch/powerpc/xmon/xmon_bpts.h
+++ b/arch/powerpc/xmon/xmon_bpts.h
@@ -3,12 +3,12 @@
 #define XMON_BPTS_H
 
 #define NBPTS	256
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <asm/inst.h>
 #define BPT_SIZE	(sizeof(ppc_inst_t) * 2)
 #define BPT_WORDS	(BPT_SIZE / sizeof(ppc_inst_t))
 
 extern unsigned int bpt_table[NBPTS * BPT_WORDS];
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* XMON_BPTS_H */
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index a4b233a0659e..6eb9db8017b8 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -28,6 +28,7 @@ config RISCV
 	select ARCH_HAS_DEBUG_VIRTUAL if MMU
 	select ARCH_HAS_DEBUG_VM_PGTABLE
 	select ARCH_HAS_DEBUG_WX
+	select ARCH_HAS_ELF_CORE_EFLAGS
 	select ARCH_HAS_FAST_MULTIPLIER
 	select ARCH_HAS_FORTIFY_SOURCE
 	select ARCH_HAS_GCOV_PROFILE_ALL
@@ -52,7 +53,8 @@ config RISCV
 	select ARCH_HAS_SYSCALL_WRAPPER
 	select ARCH_HAS_TICK_BROADCAST if GENERIC_CLOCKEVENTS_BROADCAST
 	select ARCH_HAS_UBSAN
-	select ARCH_HAS_VDSO_ARCH_DATA if GENERIC_VDSO_DATA_STORE
+	select ARCH_HAS_VDSO_ARCH_DATA if HAVE_GENERIC_VDSO
+	select ARCH_HAVE_NMI_SAFE_CMPXCHG
 	select ARCH_KEEP_MEMBLOCK if ACPI
 	select ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE	if 64BIT && MMU
 	select ARCH_OPTIONAL_KERNEL_RWX if ARCH_HAS_STRICT_KERNEL_RWX
@@ -60,23 +62,23 @@ config RISCV
 	select ARCH_STACKWALK
 	select ARCH_SUPPORTS_ATOMIC_RMW
 	# clang >= 17: https://github.com/llvm/llvm-project/commit/62fa708ceb027713b386c7e0efda994f8bdc27e2
-	select ARCH_SUPPORTS_CFI_CLANG if CLANG_VERSION >= 170000
+	select ARCH_SUPPORTS_CFI if (!CC_IS_CLANG || CLANG_VERSION >= 170000)
 	select ARCH_SUPPORTS_DEBUG_PAGEALLOC if MMU
 	select ARCH_SUPPORTS_HUGE_PFNMAP if TRANSPARENT_HUGEPAGE
 	select ARCH_SUPPORTS_HUGETLBFS if MMU
-	# LLD >= 14: https://github.com/llvm/llvm-project/issues/50505
-	select ARCH_SUPPORTS_LTO_CLANG if LLD_VERSION >= 140000
-	select ARCH_SUPPORTS_LTO_CLANG_THIN if LLD_VERSION >= 140000
+	select ARCH_SUPPORTS_LTO_CLANG if CMODEL_MEDANY
+	select ARCH_SUPPORTS_LTO_CLANG_THIN
 	select ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS if 64BIT && MMU
 	select ARCH_SUPPORTS_PAGE_TABLE_CHECK if MMU
 	select ARCH_SUPPORTS_PER_VMA_LOCK if MMU
 	select ARCH_SUPPORTS_RT
 	select ARCH_SUPPORTS_SHADOW_CALL_STACK if HAVE_SHADOW_CALL_STACK
+	select ARCH_SUPPORTS_SCHED_MC if SMP
 	select ARCH_USE_CMPXCHG_LOCKREF if 64BIT
 	select ARCH_USE_MEMTEST
 	select ARCH_USE_QUEUED_RWLOCKS
 	select ARCH_USE_SYM_ANNOTATIONS
-	select ARCH_USES_CFI_TRAPS if CFI_CLANG
+	select ARCH_USES_CFI_TRAPS if CFI
 	select ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH if MMU
 	select ARCH_WANT_DEFAULT_TOPDOWN_MMAP_LAYOUT if MMU
 	select ARCH_WANT_FRAME_POINTERS
@@ -107,7 +109,7 @@ config RISCV
 	select GENERIC_CPU_VULNERABILITIES
 	select GENERIC_EARLY_IOREMAP
 	select GENERIC_ENTRY
-	select GENERIC_GETTIMEOFDAY if HAVE_GENERIC_VDSO
+	select GENERIC_GETTIMEOFDAY if HAVE_GENERIC_VDSO && 64BIT
 	select GENERIC_IDLE_POLL_SETUP
 	select GENERIC_IOREMAP if MMU
 	select GENERIC_IRQ_IPI if SMP
@@ -120,9 +122,7 @@ config RISCV
 	select GENERIC_PCI_IOMAP
 	select GENERIC_SCHED_CLOCK
 	select GENERIC_SMP_IDLE_THREAD
-	select GENERIC_TIME_VSYSCALL if MMU && 64BIT
-	select GENERIC_VDSO_DATA_STORE if MMU
-	select GENERIC_VDSO_TIME_NS if HAVE_GENERIC_VDSO
+	select GENERIC_TIME_VSYSCALL if GENERIC_GETTIMEOFDAY
 	select HARDIRQS_SW_RESEND
 	select HAS_IOPORT if MMU
 	select HAVE_ALIGNED_STRUCT_PAGE
@@ -154,18 +154,19 @@ config RISCV
 	select HAVE_DYNAMIC_FTRACE if !XIP_KERNEL && MMU && (CLANG_SUPPORTS_DYNAMIC_FTRACE || GCC_SUPPORTS_DYNAMIC_FTRACE)
 	select FUNCTION_ALIGNMENT_4B if HAVE_DYNAMIC_FTRACE && RISCV_ISA_C
 	select HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS if HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS
-	select HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS if (DYNAMIC_FTRACE_WITH_ARGS && !CFI_CLANG)
+	select HAVE_DYNAMIC_FTRACE_WITH_CALL_OPS if (DYNAMIC_FTRACE_WITH_ARGS && !CFI)
 	select HAVE_DYNAMIC_FTRACE_WITH_ARGS if HAVE_DYNAMIC_FTRACE
 	select HAVE_FTRACE_GRAPH_FUNC
 	select HAVE_FUNCTION_GRAPH_TRACER if HAVE_DYNAMIC_FTRACE_WITH_ARGS
 	select HAVE_FUNCTION_GRAPH_FREGS
 	select HAVE_FUNCTION_TRACER if !XIP_KERNEL && HAVE_DYNAMIC_FTRACE
 	select HAVE_EBPF_JIT if MMU
+	select HAVE_GENERIC_TIF_BITS
 	select HAVE_GUP_FAST if MMU
 	select HAVE_FUNCTION_ARG_ACCESS_API
 	select HAVE_FUNCTION_ERROR_INJECTION
 	select HAVE_GCC_PLUGINS
-	select HAVE_GENERIC_VDSO if MMU && 64BIT
+	select HAVE_GENERIC_VDSO if MMU
 	select HAVE_IRQ_TIME_ACCOUNTING
 	select HAVE_KERNEL_BZIP2 if !XIP_KERNEL && !EFI_ZBOOT
 	select HAVE_KERNEL_GZIP if !XIP_KERNEL && !EFI_ZBOOT
@@ -221,7 +222,7 @@ config RISCV
 	select THREAD_INFO_IN_TASK
 	select TRACE_IRQFLAGS_SUPPORT
 	select UACCESS_MEMCPY if !MMU
-	select VDSO_GETRANDOM if HAVE_GENERIC_VDSO
+	select VDSO_GETRANDOM if HAVE_GENERIC_VDSO && 64BIT
 	select USER_STACKTRACE_SUPPORT
 	select ZONE_DMA32 if 64BIT
 
@@ -247,15 +248,9 @@ config HAVE_SHADOW_CALL_STACK
 	# https://github.com/riscv-non-isa/riscv-elf-psabi-doc/commit/a484e843e6eeb51f0cb7b8819e50da6d2444d769
 	depends on $(ld-option,--no-relax-gp)
 
-config RISCV_USE_LINKER_RELAXATION
-	def_bool y
-	# https://github.com/llvm/llvm-project/commit/6611d58f5bbcbec77262d392e2923e1d680f6985
-	depends on !LD_IS_LLD || LLD_VERSION >= 150000
-
 # https://github.com/llvm/llvm-project/commit/bbc0f99f3bc96f1db16f649fc21dd18e5b0918f6
 config ARCH_HAS_BROKEN_DWARF5
 	def_bool y
-	depends on RISCV_USE_LINKER_RELAXATION
 	# https://github.com/llvm/llvm-project/commit/1df5ea29b43690b6622db2cad7b745607ca4de6a
 	depends on AS_IS_LLVM && AS_VERSION < 180000
 	# https://github.com/llvm/llvm-project/commit/7ffabb61a5569444b5ac9322e22e5471cc5e4a77
@@ -453,14 +448,6 @@ config SMP
 
 	  If you don't know what to do here, say N.
 
-config SCHED_MC
-	bool "Multi-core scheduler support"
-	depends on SMP
-	help
-	  Multi-core scheduler support improves the CPU scheduler's decision
-	  making when dealing with multi-core CPU chips at a cost of slightly
-	  increased overhead in some places. If unsure say N here.
-
 config NR_CPUS
 	int "Maximum number of CPUs (2-512)"
 	depends on SMP
@@ -627,7 +614,7 @@ config TOOLCHAIN_HAS_V
 	default y
 	depends on !64BIT || $(cc-option,-mabi=lp64 -march=rv64imv)
 	depends on !32BIT || $(cc-option,-mabi=ilp32 -march=rv32imv)
-	depends on LLD_VERSION >= 140000 || LD_VERSION >= 23800
+	depends on LD_IS_LLD || LD_VERSION >= 23800
 	depends on AS_HAS_OPTION_ARCH
 
 config RISCV_ISA_V
@@ -714,7 +701,6 @@ config TOOLCHAIN_HAS_ZACAS
 
 config RISCV_ISA_ZACAS
 	bool "Zacas extension support for atomic CAS"
-	depends on TOOLCHAIN_HAS_ZACAS
 	depends on RISCV_ALTERNATIVE
 	default y
 	help
@@ -728,7 +714,7 @@ config TOOLCHAIN_HAS_ZBB
 	default y
 	depends on !64BIT || $(cc-option,-mabi=lp64 -march=rv64ima_zbb)
 	depends on !32BIT || $(cc-option,-mabi=ilp32 -march=rv32ima_zbb)
-	depends on LLD_VERSION >= 150000 || LD_VERSION >= 23900
+	depends on LD_IS_LLD || LD_VERSION >= 23900
 	depends on AS_HAS_OPTION_ARCH
 
 # This symbol indicates that the toolchain supports all v1.0 vector crypto
@@ -743,7 +729,7 @@ config TOOLCHAIN_HAS_ZBA
 	default y
 	depends on !64BIT || $(cc-option,-mabi=lp64 -march=rv64ima_zba)
 	depends on !32BIT || $(cc-option,-mabi=ilp32 -march=rv32ima_zba)
-	depends on LLD_VERSION >= 150000 || LD_VERSION >= 23900
+	depends on LD_IS_LLD || LD_VERSION >= 23900
 	depends on AS_HAS_OPTION_ARCH
 
 config RISCV_ISA_ZBA
@@ -778,7 +764,7 @@ config TOOLCHAIN_HAS_ZBC
 	default y
 	depends on !64BIT || $(cc-option,-mabi=lp64 -march=rv64ima_zbc)
 	depends on !32BIT || $(cc-option,-mabi=ilp32 -march=rv32ima_zbc)
-	depends on LLD_VERSION >= 150000 || LD_VERSION >= 23900
+	depends on LD_IS_LLD || LD_VERSION >= 23900
 	depends on AS_HAS_OPTION_ARCH
 
 config RISCV_ISA_ZBC
@@ -801,7 +787,7 @@ config TOOLCHAIN_HAS_ZBKB
 	default y
 	depends on !64BIT || $(cc-option,-mabi=lp64 -march=rv64ima_zbkb)
 	depends on !32BIT || $(cc-option,-mabi=ilp32 -march=rv32ima_zbkb)
-	depends on LLD_VERSION >= 150000 || LD_VERSION >= 23900
+	depends on LD_IS_LLD || LD_VERSION >= 23900
 	depends on AS_HAS_OPTION_ARCH
 
 config RISCV_ISA_ZBKB
diff --git a/arch/riscv/Kconfig.errata b/arch/riscv/Kconfig.errata
index e318119d570d..aca9b0cfcfec 100644
--- a/arch/riscv/Kconfig.errata
+++ b/arch/riscv/Kconfig.errata
@@ -21,6 +21,29 @@ config ERRATA_ANDES_CMO
 
 	  If you don't know what to do here, say "Y".
 
+config ERRATA_MIPS
+	bool "MIPS errata"
+	depends on RISCV_ALTERNATIVE
+	help
+	  All MIPS errata Kconfig depend on this Kconfig. Disabling
+	  this Kconfig will disable all MIPS errata. Please say "Y"
+	  here if your platform uses MIPS CPU cores.
+
+	  Otherwise, please say "N" here to avoid unnecessary overhead.
+
+config ERRATA_MIPS_P8700_PAUSE_OPCODE
+	bool "Fix the PAUSE Opcode for MIPS P8700"
+	depends on ERRATA_MIPS && 64BIT
+	default n
+	help
+	   The RISCV MIPS P8700 uses a different opcode for PAUSE.
+	   It is a 'hint' encoding of the SLLI instruction,
+	   with rd=0, rs1=0 and imm=5. It will behave as a NOP
+	   instruction if no additional behavior beyond that of
+	   SLLI is implemented.
+
+	   If you are not using the P8700 processor, say n.
+
 config ERRATA_SIFIVE
 	bool "SiFive errata"
 	depends on RISCV_ALTERNATIVE
diff --git a/arch/riscv/Kconfig.socs b/arch/riscv/Kconfig.socs
index 61ceae0aa27a..848e7149e443 100644
--- a/arch/riscv/Kconfig.socs
+++ b/arch/riscv/Kconfig.socs
@@ -7,6 +7,12 @@ config ARCH_ANDES
 	help
 	  This enables support for Andes SoC platform hardware.
 
+config ARCH_ESWIN
+	bool "ESWIN SoCs"
+	help
+	  This enables support for ESWIN SoC platform hardware,
+	  including the ESWIN EIC7700 SoC.
+
 config ARCH_MICROCHIP_POLARFIRE
 	def_bool ARCH_MICROCHIP
 
diff --git a/arch/riscv/Kconfig.vendor b/arch/riscv/Kconfig.vendor
index e14f26368963..3c1f92e406c3 100644
--- a/arch/riscv/Kconfig.vendor
+++ b/arch/riscv/Kconfig.vendor
@@ -16,6 +16,19 @@ config RISCV_ISA_VENDOR_EXT_ANDES
 	  If you don't know what to do here, say Y.
 endmenu
 
+menu "MIPS"
+config RISCV_ISA_VENDOR_EXT_MIPS
+	bool "MIPS vendor extension support"
+	select RISCV_ISA_VENDOR_EXT
+	default y
+	help
+	  Say N here to disable detection of and support for all MIPS vendor
+	  extensions. Without this option enabled, MIPS vendor extensions will
+	  not be detected at boot and their presence not reported to userspace.
+
+	  If you don't know what to do here, say Y.
+endmenu
+
 menu "SiFive"
 config RISCV_ISA_VENDOR_EXT_SIFIVE
 	bool "SiFive vendor extension support"
diff --git a/arch/riscv/Makefile b/arch/riscv/Makefile
index df57654a615e..ecf2fcce2d92 100644
--- a/arch/riscv/Makefile
+++ b/arch/riscv/Makefile
@@ -46,17 +46,10 @@ else
 	KBUILD_LDFLAGS += -melf32lriscv
 endif
 
-ifndef CONFIG_RISCV_USE_LINKER_RELAXATION
-	KBUILD_CFLAGS += -mno-relax
-	KBUILD_AFLAGS += -mno-relax
-ifndef CONFIG_AS_IS_LLVM
-	KBUILD_CFLAGS += -Wa,-mno-relax
-	KBUILD_AFLAGS += -Wa,-mno-relax
-endif
 # LLVM has an issue with target-features and LTO: https://github.com/llvm/llvm-project/issues/59350
 # Ensure it is aware of linker relaxation with LTO, otherwise relocations may
 # be incorrect: https://github.com/llvm/llvm-project/issues/65090
-else ifeq ($(CONFIG_LTO_CLANG),y)
+ifeq ($(CONFIG_LTO_CLANG),y)
 	KBUILD_LDFLAGS += -mllvm -mattr=+c -mllvm -mattr=+relax
 endif
 
diff --git a/arch/riscv/boot/dts/Makefile b/arch/riscv/boot/dts/Makefile
index 3b99e91efa25..3763d199c70a 100644
--- a/arch/riscv/boot/dts/Makefile
+++ b/arch/riscv/boot/dts/Makefile
@@ -2,6 +2,7 @@
 subdir-y += allwinner
 subdir-y += andes
 subdir-y += canaan
+subdir-y += eswin
 subdir-y += microchip
 subdir-y += renesas
 subdir-y += sifive
diff --git a/arch/riscv/boot/dts/allwinner/sun20i-d1-devterm-v3.14.dts b/arch/riscv/boot/dts/allwinner/sun20i-d1-devterm-v3.14.dts
index bc5c84f22762..5f2e5cc3e3d5 100644
--- a/arch/riscv/boot/dts/allwinner/sun20i-d1-devterm-v3.14.dts
+++ b/arch/riscv/boot/dts/allwinner/sun20i-d1-devterm-v3.14.dts
@@ -17,7 +17,7 @@
 		#cooling-cells = <2>;
 	};
 
-	i2c-gpio-0 {
+	i2c-0 {
 		compatible = "i2c-gpio";
 		sda-gpios = <&pio 3 14 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PD14/GPIO44 */
 		scl-gpios = <&pio 3 15 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>; /* PD15/GPIO45 */
diff --git a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
index e4175adb028d..63e252b44973 100644
--- a/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
+++ b/arch/riscv/boot/dts/allwinner/sunxi-d1s-t113.dtsi
@@ -79,6 +79,36 @@
 			};
 
 			/omit-if-no-ref/
+			i2c2_pd_pins: i2c2-pd-pins {
+				pins = "PD20", "PD21";
+				function = "i2c2";
+			};
+
+			/omit-if-no-ref/
+			i2c3_pg_pins: i2c3-pg-pins {
+				pins = "PG10", "PG11";
+				function = "i2c3";
+			};
+
+			/omit-if-no-ref/
+			i2s1_pins: i2s1-pins {
+				pins = "PG12", "PG13";
+				function = "i2s1";
+			};
+
+			/omit-if-no-ref/
+			i2s1_din0_pin: i2s1-din0-pin {
+				pins = "PG14";
+				function = "i2s1_din";
+			};
+
+			/omit-if-no-ref/
+			i2s1_dout0_pin: i2s1-dout0-pin {
+				pins = "PG15";
+				function = "i2s1_dout";
+			};
+
+			/omit-if-no-ref/
 			lcd_rgb666_pins: lcd-rgb666-pins {
 				pins = "PD0", "PD1", "PD2", "PD3", "PD4", "PD5",
 				       "PD6", "PD7", "PD8", "PD9", "PD10", "PD11",
@@ -127,6 +157,24 @@
 			};
 
 			/omit-if-no-ref/
+			spi1_pins: spi1-pins {
+				pins = "PD10", "PD11", "PD12", "PD13";
+				function = "spi1";
+			};
+
+			/omit-if-no-ref/
+			spi1_hold_pin: spi1-hold-pin {
+				pins = "PD14";
+				function = "spi1";
+			};
+
+			/omit-if-no-ref/
+			spi1_wp_pin: spi1-wp-pin {
+				pins = "PD15";
+				function = "spi1";
+			};
+
+			/omit-if-no-ref/
 			uart1_pg6_pins: uart1-pg6-pins {
 				pins = "PG6", "PG7";
 				function = "uart1";
diff --git a/arch/riscv/boot/dts/eswin/Makefile b/arch/riscv/boot/dts/eswin/Makefile
new file mode 100644
index 000000000000..224101ae471e
--- /dev/null
+++ b/arch/riscv/boot/dts/eswin/Makefile
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_ESWIN) += eic7700-hifive-premier-p550.dtb
diff --git a/arch/riscv/boot/dts/eswin/eic7700-hifive-premier-p550.dts b/arch/riscv/boot/dts/eswin/eic7700-hifive-premier-p550.dts
new file mode 100644
index 000000000000..131ed1fc6b2e
--- /dev/null
+++ b/arch/riscv/boot/dts/eswin/eic7700-hifive-premier-p550.dts
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2024, Beijing ESWIN Computing Technology Co., Ltd.
+ */
+
+/dts-v1/;
+
+#include "eic7700.dtsi"
+
+/ {
+	compatible = "sifive,hifive-premier-p550", "eswin,eic7700";
+	model = "SiFive HiFive Premier P550";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
diff --git a/arch/riscv/boot/dts/eswin/eic7700.dtsi b/arch/riscv/boot/dts/eswin/eic7700.dtsi
new file mode 100644
index 000000000000..c3ed93008bca
--- /dev/null
+++ b/arch/riscv/boot/dts/eswin/eic7700.dtsi
@@ -0,0 +1,345 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (c) 2024 Beijing ESWIN Computing Technology Co., Ltd.
+ */
+
+/dts-v1/;
+
+/ {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		timebase-frequency = <1000000>;
+
+		cpu0: cpu@0 {
+			compatible = "sifive,p550", "riscv";
+			device_type = "cpu";
+			d-cache-block-size = <64>;
+			d-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <32>;
+			i-cache-block-size = <64>;
+			i-cache-sets = <128>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <32>;
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache_0>;
+			reg = <0x0>;
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "h", "sscofpmf",
+					       "zba", "zbb", "zicsr", "zifencei";
+			tlb-split;
+
+			cpu0_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				#interrupt-cells = <1>;
+				interrupt-controller;
+			};
+		};
+
+		cpu1: cpu@1 {
+			compatible = "sifive,p550", "riscv";
+			d-cache-block-size = <64>;
+			d-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <32>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <128>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <32>;
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache_1>;
+			reg = <0x1>;
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "h", "sscofpmf",
+					       "zba", "zbb", "zicsr", "zifencei";
+			tlb-split;
+
+			cpu1_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				#interrupt-cells = <1>;
+				interrupt-controller;
+			};
+		};
+
+		cpu2: cpu@2 {
+			compatible = "sifive,p550", "riscv";
+			d-cache-block-size = <64>;
+			d-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <32>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <128>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <32>;
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache_2>;
+			reg = <0x2>;
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "h", "sscofpmf",
+					       "zba", "zbb", "zicsr", "zifencei";
+			tlb-split;
+
+			cpu2_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				#interrupt-cells = <1>;
+				interrupt-controller;
+			};
+		};
+
+		cpu3: cpu@3 {
+			compatible = "sifive,p550", "riscv";
+			d-cache-block-size = <64>;
+			d-cache-sets = <128>;
+			d-cache-size = <32768>;
+			d-tlb-sets = <1>;
+			d-tlb-size = <32>;
+			device_type = "cpu";
+			i-cache-block-size = <64>;
+			i-cache-sets = <128>;
+			i-cache-size = <32768>;
+			i-tlb-sets = <1>;
+			i-tlb-size = <32>;
+			mmu-type = "riscv,sv48";
+			next-level-cache = <&l2_cache_3>;
+			reg = <0x3>;
+			riscv,isa-base = "rv64i";
+			riscv,isa-extensions = "i", "m", "a", "f", "d", "c", "h", "sscofpmf",
+					       "zba", "zbb", "zicsr", "zifencei";
+			tlb-split;
+
+			cpu3_intc: interrupt-controller {
+				compatible = "riscv,cpu-intc";
+				#interrupt-cells = <1>;
+				interrupt-controller;
+			};
+		};
+
+		l2_cache_0: l2-cache0 {
+			compatible = "cache";
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-sets = <512>;
+			cache-size = <262144>;
+			cache-unified;
+			next-level-cache = <&ccache>;
+		};
+
+		l2_cache_1: l2-cache1 {
+			compatible = "cache";
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-sets = <512>;
+			cache-size = <262144>;
+			cache-unified;
+			next-level-cache = <&ccache>;
+		};
+
+		l2_cache_2: l2-cache2 {
+			compatible = "cache";
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-sets = <512>;
+			cache-size = <262144>;
+			cache-unified;
+			next-level-cache = <&ccache>;
+		};
+
+		l2_cache_3: l2-cache3 {
+			compatible = "cache";
+			cache-block-size = <64>;
+			cache-level = <2>;
+			cache-sets = <512>;
+			cache-size = <262144>;
+			cache-unified;
+			next-level-cache = <&ccache>;
+		};
+	};
+
+	pmu {
+		compatible = "riscv,pmu";
+		riscv,event-to-mhpmcounters =
+				<0x00001 0x00001 0x00000001>,
+				<0x00002 0x00002 0x00000004>,
+				<0x00004 0x00006 0x00000078>,
+				<0x10009 0x10009 0x00000078>,
+				<0x10019 0x10019 0x00000078>,
+				<0x10021 0x10021 0x00000078>;
+		riscv,event-to-mhpmevent =
+				<0x00004 0x00000000 0x00000202>,
+				<0x00005 0x00000000 0x00004000>,
+				<0x00006 0x00000000 0x00002001>,
+				<0x10009 0x00000000 0x00000102>,
+				<0x10019 0x00000000 0x00001002>,
+				<0x10021 0x00000000 0x00000802>;
+		riscv,raw-event-to-mhpmcounters =
+				<0x00000000 0x00000000 0xffffffff 0xfc0000ff 0x00000078>,
+				<0x00000000 0x00000001 0xffffffff 0xfffe07ff 0x00000078>,
+				<0x00000000 0x00000002 0xffffffff 0xfffe00ff 0x00000078>,
+				<0x00000000 0x00000003 0xfffffffc 0x000000ff 0x00000078>,
+				<0x00000000 0x00000004 0xffffffc0 0x000000ff 0x00000078>,
+				<0x00000000 0x00000005 0xffffffff 0xfffffdff 0x00000078>,
+				<0x00000000 0x00000006 0xfffffe00 0x110204ff 0x00000078>,
+				<0x00000000 0x00000007 0xffffffff 0xf00000ff 0x00000078>,
+				<0x00000000 0x00000008 0xfffffe04 0x000000ff 0x00000078>,
+				<0x00000000 0x00000009 0xffffffff 0xffffc0ff 0x00000078>,
+				<0x00000000 0x0000000a 0xffffffff 0xf00000ff 0x00000078>,
+				<0x00000000 0x0000000b 0xffffffff 0xfffffcff 0x00000078>,
+				<0x00000000 0x0000000c 0xfffffff0 0x000000ff 0x00000078>,
+				<0x00000000 0x0000000d 0xffffffff 0x800000ff 0x00000078>,
+				<0x00000000 0x0000000e 0xffffffff 0xf80000ff 0x00000078>,
+				<0x00000000 0x0000000f 0xfffffffc 0x000000ff 0x00000078>;
+	};
+
+	soc {
+		compatible = "simple-bus";
+		ranges;
+		interrupt-parent = <&plic>;
+		#address-cells = <2>;
+		#size-cells = <2>;
+		dma-noncoherent;
+
+		clint: timer@2000000 {
+			compatible = "eswin,eic7700-clint", "sifive,clint0";
+			reg = <0x0 0x02000000 0x0 0x10000>;
+			interrupts-extended =
+				<&cpu0_intc 3>, <&cpu0_intc 7>,
+				<&cpu1_intc 3>, <&cpu1_intc 7>,
+				<&cpu2_intc 3>, <&cpu2_intc 7>,
+				<&cpu3_intc 3>, <&cpu3_intc 7>;
+		};
+
+		ccache: cache-controller@2010000 {
+			compatible = "eswin,eic7700-l3-cache", "sifive,ccache0", "cache";
+			reg = <0x0 0x2010000 0x0 0x4000>;
+			interrupts = <1>, <3>, <4>, <2>;
+			cache-block-size = <64>;
+			cache-level = <3>;
+			cache-sets = <4096>;
+			cache-size = <4194304>;
+			cache-unified;
+		};
+
+		plic: interrupt-controller@c000000 {
+			compatible = "eswin,eic7700-plic", "sifive,plic-1.0.0";
+			reg = <0x0 0xc000000 0x0 0x4000000>;
+			interrupt-controller;
+			interrupts-extended =
+				<&cpu0_intc 11>, <&cpu0_intc 9>,
+				<&cpu1_intc 11>, <&cpu1_intc 9>,
+				<&cpu2_intc 11>, <&cpu2_intc 9>,
+				<&cpu3_intc 11>, <&cpu3_intc 9>;
+			riscv,ndev = <520>;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+		};
+
+		uart0: serial@50900000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x50900000 0x0 0x10000>;
+			interrupts = <100>;
+			clock-frequency = <200000000>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		uart1: serial@50910000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x50910000 0x0 0x10000>;
+			interrupts = <101>;
+			clock-frequency = <200000000>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		uart2: serial@50920000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x50920000 0x0 0x10000>;
+			interrupts = <102>;
+			clock-frequency = <200000000>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		uart3: serial@50930000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x50930000 0x0 0x10000>;
+			interrupts = <103>;
+			clock-frequency = <200000000>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		uart4: serial@50940000 {
+			compatible = "snps,dw-apb-uart";
+			reg = <0x0 0x50940000 0x0 0x10000>;
+			interrupts = <104>;
+			clock-frequency = <200000000>;
+			reg-io-width = <4>;
+			reg-shift = <2>;
+			status = "disabled";
+		};
+
+		gpio@51600000 {
+			compatible = "snps,dw-apb-gpio";
+			reg = <0x0 0x51600000 0x0 0x80>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			gpioA: gpio-port@0 {
+				compatible = "snps,dw-apb-gpio-port";
+				reg = <0>;
+				interrupt-controller;
+				#interrupt-cells = <2>;
+				interrupts =
+					<303>, <304>, <305>, <306>, <307>, <308>, <309>,
+					<310>, <311>, <312>, <313>, <314>, <315>, <316>,
+					<317>, <318>, <319>, <320>, <321>, <322>, <323>,
+					<324>, <325>, <326>, <327>, <328>, <329>, <330>,
+					<331>, <332>, <333>, <334>;
+				gpio-controller;
+				ngpios = <32>;
+				#gpio-cells = <2>;
+			};
+
+			gpioB: gpio-port@1 {
+				compatible = "snps,dw-apb-gpio-port";
+				reg = <1>;
+				gpio-controller;
+				ngpios = <32>;
+				#gpio-cells = <2>;
+			};
+
+			gpioC: gpio-port@2 {
+				compatible = "snps,dw-apb-gpio-port";
+				reg = <2>;
+				gpio-controller;
+				ngpios = <32>;
+				#gpio-cells = <2>;
+			};
+
+			gpioD: gpio-port@3 {
+				compatible = "snps,dw-apb-gpio-port";
+				reg = <3>;
+				gpio-controller;
+				ngpios = <16>;
+				#gpio-cells = <2>;
+			};
+		};
+	};
+};
diff --git a/arch/riscv/boot/dts/microchip/Makefile b/arch/riscv/boot/dts/microchip/Makefile
index f51aeeb9fd3b..345ed7a48cc1 100644
--- a/arch/riscv/boot/dts/microchip/Makefile
+++ b/arch/riscv/boot/dts/microchip/Makefile
@@ -1,6 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-beaglev-fire.dtb
+dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-disco-kit.dtb
 dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-icicle-kit.dtb
+dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-icicle-kit-prod.dtb
 dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-m100pfsevp.dtb
 dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-polarberry.dtb
 dtb-$(CONFIG_ARCH_MICROCHIP_POLARFIRE) += mpfs-sev-kit.dtb
diff --git a/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire.dts b/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire.dts
index 47cf693beb68..55e30f3636df 100644
--- a/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire.dts
+++ b/arch/riscv/boot/dts/microchip/mpfs-beaglev-fire.dts
@@ -88,7 +88,7 @@
 		     <53>, <53>, <53>, <53>,
 		     <53>, <53>, <53>, <53>,
 		     <53>, <53>, <53>, <53>;
-	ngpios=<32>;
+	ngpios = <32>;
 	gpio-line-names = "P8_PIN3_USER_LED_0", "P8_PIN4_USER_LED_1", "P8_PIN5_USER_LED_2",
 			  "P8_PIN6_USER_LED_3", "P8_PIN7_USER_LED_4", "P8_PIN8_USER_LED_5",
 			  "P8_PIN9_USER_LED_6", "P8_PIN10_USER_LED_7", "P8_PIN11_USER_LED_8",
diff --git a/arch/riscv/boot/dts/microchip/mpfs-disco-kit-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-disco-kit-fabric.dtsi
new file mode 100644
index 000000000000..ae8be7d6f392
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs-disco-kit-fabric.dtsi
@@ -0,0 +1,58 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020-2025 Microchip Technology Inc */
+
+/ {
+	core_pwm0: pwm@40000000 {
+		compatible = "microchip,corepwm-rtl-v4";
+		reg = <0x0 0x40000000 0x0 0xF0>;
+		microchip,sync-update-mask = /bits/ 32 <0>;
+		#pwm-cells = <3>;
+		clocks = <&ccc_sw CLK_CCC_PLL0_OUT3>;
+		status = "disabled";
+	};
+
+	i2c2: i2c@40000200 {
+		compatible = "microchip,corei2c-rtl-v7";
+		reg = <0x0 0x40000200 0x0 0x100>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clocks = <&ccc_sw CLK_CCC_PLL0_OUT3>;
+		interrupt-parent = <&plic>;
+		interrupts = <122>;
+		clock-frequency = <100000>;
+		status = "disabled";
+	};
+
+	ihc: mailbox {
+		compatible = "microchip,sbi-ipc";
+		interrupt-parent = <&plic>;
+		interrupts = <180>, <179>, <178>, <177>;
+		interrupt-names = "hart-1", "hart-2", "hart-3", "hart-4";
+		#mbox-cells = <1>;
+		status = "disabled";
+	};
+
+	mailbox@50000000 {
+		compatible = "microchip,miv-ihc-rtl-v2";
+		reg = <0x0 0x50000000 0x0 0x1c000>;
+		interrupt-parent = <&plic>;
+		interrupts = <180>, <179>, <178>, <177>;
+		interrupt-names = "hart-1", "hart-2", "hart-3", "hart-4";
+		#mbox-cells = <1>;
+		microchip,ihc-chan-disabled-mask = /bits/ 16 <0>;
+		status = "disabled";
+	};
+
+	refclk_ccc: clock-cccref {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+	};
+};
+
+&ccc_sw {
+	clocks = <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>, <&refclk_ccc>,
+		 <&refclk_ccc>, <&refclk_ccc>;
+	clock-names = "pll0_ref0", "pll0_ref1", "pll1_ref0", "pll1_ref1",
+		      "dll0_ref", "dll1_ref";
+	status = "okay";
+};
diff --git a/arch/riscv/boot/dts/microchip/mpfs-disco-kit.dts b/arch/riscv/boot/dts/microchip/mpfs-disco-kit.dts
new file mode 100644
index 000000000000..c068b9bb5bfd
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs-disco-kit.dts
@@ -0,0 +1,190 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2020-2025 Microchip Technology Inc */
+
+/dts-v1/;
+
+#include "mpfs.dtsi"
+#include "mpfs-disco-kit-fabric.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Microchip PolarFire-SoC Discovery Kit";
+	compatible = "microchip,mpfs-disco-kit-reference-rtl-v2507",
+		     "microchip,mpfs-disco-kit",
+		     "microchip,mpfs";
+
+	aliases {
+		ethernet0 = &mac0;
+		serial4 = &mmuart4;
+	};
+
+	chosen {
+		stdout-path = "serial4:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_AMBER>;
+			label = "led1";
+		};
+
+		led-2 {
+			gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_RED>;
+			label = "led2";
+		};
+
+		led-3 {
+			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_AMBER>;
+			label = "led3";
+		};
+
+		led-4 {
+			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_RED>;
+			label = "led4";
+		};
+
+		led-5 {
+			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_AMBER>;
+			label = "led5";
+		};
+
+		led-6 {
+			gpios = <&gpio2 22 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_RED>;
+			label = "led6";
+		};
+
+		led-7 {
+			gpios = <&gpio2 23 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_AMBER>;
+			label = "led7";
+		};
+
+		led-8 {
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_RED>;
+			label = "led8";
+		};
+	};
+
+	ddrc_cache_lo: memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hss_payload: region@bfc00000 {
+			reg = <0x0 0xbfc00000 0x0 0x400000>;
+			no-map;
+		};
+	};
+};
+
+&core_pwm0 {
+	status = "okay";
+};
+
+&gpio1 {
+	interrupts = <27>, <28>, <29>, <30>,
+		     <31>, <32>, <33>, <47>,
+		     <35>, <36>, <37>, <38>,
+		     <39>, <40>, <41>, <42>,
+		     <43>, <44>, <45>, <46>,
+		     <47>, <48>, <49>, <50>;
+	status = "okay";
+};
+
+&gpio2 {
+	interrupts = <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&ihc {
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "sgmii";
+	phy-handle = <&phy0>;
+	status = "okay";
+
+	phy0: ethernet-phy@b {
+		reg = <0xb>;
+	};
+};
+
+&mbox {
+	status = "okay";
+};
+
+&mmc {
+	bus-width = <4>;
+	disable-wp;
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	no-1-8-v;
+	status = "okay";
+};
+
+&mmuart1 {
+	status = "okay";
+};
+
+&mmuart4 {
+	status = "okay";
+};
+
+&refclk {
+	clock-frequency = <125000000>;
+};
+
+&refclk_ccc {
+	clock-frequency = <50000000>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&syscontroller {
+	status = "okay";
+};
diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-common.dtsi b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-common.dtsi
new file mode 100644
index 000000000000..e01a216e6c3a
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-common.dtsi
@@ -0,0 +1,249 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2025 Microchip Technology Inc */
+
+/dts-v1/;
+
+#include "mpfs.dtsi"
+#include "mpfs-icicle-kit-fabric.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+
+/ {
+	aliases {
+		ethernet0 = &mac1;
+		serial0 = &mmuart0;
+		serial1 = &mmuart1;
+		serial2 = &mmuart2;
+		serial3 = &mmuart3;
+		serial4 = &mmuart4;
+	};
+
+	chosen {
+		stdout-path = "serial1:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-1 {
+			gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_RED>;
+			label = "led1";
+		};
+
+		led-2 {
+			gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_RED>;
+			label = "led2";
+		};
+
+		led-3 {
+			gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_AMBER>;
+			label = "led3";
+		};
+
+		led-4 {
+			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+			color = <LED_COLOR_ID_AMBER>;
+			label = "led4";
+		};
+	};
+
+	ddrc_cache_lo: memory@80000000 {
+		device_type = "memory";
+		reg = <0x0 0x80000000 0x0 0x40000000>;
+	};
+
+	ddrc_cache_hi: memory@1040000000 {
+		device_type = "memory";
+		reg = <0x10 0x40000000 0x0 0x40000000>;
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		hss_payload: region@bfc00000 {
+			reg = <0x0 0xbfc00000 0x0 0x400000>;
+			no-map;
+		};
+	};
+};
+
+&core_pwm0 {
+	status = "okay";
+};
+
+&gpio2 {
+	interrupts = <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>,
+		     <53>, <53>, <53>, <53>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	power-monitor@10 {
+		compatible = "microchip,pac1934";
+		reg = <0x10>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@1 {
+			reg = <0x1>;
+			shunt-resistor-micro-ohms = <10000>;
+			label = "VDDREG";
+		};
+
+		channel@2 {
+			reg = <0x2>;
+			shunt-resistor-micro-ohms = <10000>;
+			label = "VDDA25";
+		};
+
+		channel@3 {
+			reg = <0x3>;
+			shunt-resistor-micro-ohms = <10000>;
+			label = "VDD25";
+		};
+
+		channel@4 {
+			reg = <0x4>;
+			shunt-resistor-micro-ohms = <10000>;
+			label = "VDDA_REG";
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+};
+
+&ihc {
+	status = "okay";
+};
+
+&mac0 {
+	phy-mode = "sgmii";
+	phy-handle = <&phy0>;
+	status = "okay";
+};
+
+&mac1 {
+	phy-mode = "sgmii";
+	phy-handle = <&phy1>;
+	status = "okay";
+
+	phy1: ethernet-phy@9 {
+		reg = <9>;
+	};
+
+	phy0: ethernet-phy@8 {
+		reg = <8>;
+	};
+};
+
+&mbox {
+	status = "okay";
+};
+
+&mmc {
+	bus-width = <4>;
+	disable-wp;
+	cap-sd-highspeed;
+	cap-mmc-highspeed;
+	mmc-ddr-1_8v;
+	mmc-hs200-1_8v;
+	sd-uhs-sdr12;
+	sd-uhs-sdr25;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&mmuart1 {
+	status = "okay";
+};
+
+&mmuart2 {
+	status = "okay";
+};
+
+&mmuart3 {
+	status = "okay";
+};
+
+&mmuart4 {
+	status = "okay";
+};
+
+&pcie {
+	status = "okay";
+};
+
+&qspi {
+	status = "okay";
+};
+
+&refclk {
+	clock-frequency = <125000000>;
+};
+
+&refclk_ccc {
+	clock-frequency = <50000000>;
+};
+
+&rtc {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&spi1 {
+	status = "okay";
+};
+
+&syscontroller {
+	status = "okay";
+};
+
+&syscontroller_qspi {
+	/*
+	 * The flash *is* there, but Icicle kits that have engineering sample
+	 * silicon (write?) access to this flash to non-functional. The system
+	 * controller itself can actually access it, but the MSS cannot write
+	 * an image there. Instantiating a coreQSPI in the fabric & connecting
+	 * it to the flash instead should work though. Pre-production or later
+	 * silicon does not have this issue.
+	 */
+	status = "disabled";
+
+	sys_ctrl_flash: flash@0 { // MT25QL01GBBB8ESF-0SIT
+		compatible = "jedec,spi-nor";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		spi-max-frequency = <20000000>;
+		spi-rx-bus-width = <1>;
+		reg = <0>;
+	};
+};
+
+&usb {
+	status = "okay";
+	dr_mode = "host";
+};
diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi
index a6dda55a2d1d..71f724325578 100644
--- a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi
+++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-fabric.dtsi
@@ -2,9 +2,6 @@
 /* Copyright (c) 2020-2021 Microchip Technology Inc */
 
 / {
-	compatible = "microchip,mpfs-icicle-reference-rtlv2210", "microchip,mpfs-icicle-kit",
-		     "microchip,mpfs";
-
 	core_pwm0: pwm@40000000 {
 		compatible = "microchip,corepwm-rtl-v4";
 		reg = <0x0 0x40000000 0x0 0xF0>;
@@ -26,6 +23,26 @@
 		status = "disabled";
 	};
 
+	ihc: mailbox {
+		compatible = "microchip,sbi-ipc";
+		interrupt-parent = <&plic>;
+		interrupts = <180>, <179>, <178>, <177>;
+		interrupt-names = "hart-1", "hart-2", "hart-3", "hart-4";
+		#mbox-cells = <1>;
+		status = "disabled";
+	};
+
+	mailbox@50000000 {
+		compatible = "microchip,miv-ihc-rtl-v2";
+		reg = <0x0 0x50000000 0x0 0x1c000>;
+		interrupt-parent = <&plic>;
+		interrupts = <180>, <179>, <178>, <177>;
+		interrupt-names = "hart-1", "hart-2", "hart-3", "hart-4";
+		#mbox-cells = <1>;
+		microchip,ihc-chan-disabled-mask = /bits/ 16 <0>;
+		status = "disabled";
+	};
+
 	pcie: pcie@3000000000 {
 		compatible = "microchip,pcie-host-1.0";
 		#address-cells = <0x3>;
@@ -57,7 +74,7 @@
 		};
 	};
 
-	refclk_ccc: cccrefclk {
+	refclk_ccc: clock-cccref {
 		compatible = "fixed-clock";
 		#clock-cells = <0>;
 	};
diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-prod.dts b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-prod.dts
new file mode 100644
index 000000000000..8afedece89d1
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit-prod.dts
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2025 Microchip Technology Inc */
+
+/dts-v1/;
+
+#include "mpfs-icicle-kit-common.dtsi"
+
+/ {
+	model = "Microchip PolarFire-SoC Icicle Kit (Production Silicon)";
+	compatible = "microchip,mpfs-icicle-prod-reference-rtl-v2507",
+		     "microchip,mpfs-icicle-kit-prod",
+		     "microchip,mpfs-icicle-kit",
+		     "microchip,mpfs-prod",
+		     "microchip,mpfs";
+};
+
+&syscontroller {
+	microchip,bitstream-flash = <&sys_ctrl_flash>;
+};
+
+&syscontroller_qspi {
+	status = "okay";
+};
diff --git a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts
index f80df225f72b..556aa9638282 100644
--- a/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts
+++ b/arch/riscv/boot/dts/microchip/mpfs-icicle-kit.dts
@@ -3,249 +3,11 @@
 
 /dts-v1/;
 
-#include "mpfs.dtsi"
-#include "mpfs-icicle-kit-fabric.dtsi"
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/leds/common.h>
+#include "mpfs-icicle-kit-common.dtsi"
 
 / {
 	model = "Microchip PolarFire-SoC Icicle Kit";
-	compatible = "microchip,mpfs-icicle-reference-rtlv2210", "microchip,mpfs-icicle-kit",
+	compatible = "microchip,mpfs-icicle-es-reference-rtl-v2507",
+		     "microchip,mpfs-icicle-kit",
 		     "microchip,mpfs";
-
-	aliases {
-		ethernet0 = &mac1;
-		serial0 = &mmuart0;
-		serial1 = &mmuart1;
-		serial2 = &mmuart2;
-		serial3 = &mmuart3;
-		serial4 = &mmuart4;
-	};
-
-	chosen {
-		stdout-path = "serial1:115200n8";
-	};
-
-	leds {
-		compatible = "gpio-leds";
-
-		led-1 {
-			gpios = <&gpio2 16 GPIO_ACTIVE_HIGH>;
-			color = <LED_COLOR_ID_RED>;
-			label = "led1";
-		};
-
-		led-2 {
-			gpios = <&gpio2 17 GPIO_ACTIVE_HIGH>;
-			color = <LED_COLOR_ID_RED>;
-			label = "led2";
-		};
-
-		led-3 {
-			gpios = <&gpio2 18 GPIO_ACTIVE_HIGH>;
-			color = <LED_COLOR_ID_AMBER>;
-			label = "led3";
-		};
-
-		led-4 {
-			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
-			color = <LED_COLOR_ID_AMBER>;
-			label = "led4";
-		};
-	};
-
-	ddrc_cache_lo: memory@80000000 {
-		device_type = "memory";
-		reg = <0x0 0x80000000 0x0 0x40000000>;
-		status = "okay";
-	};
-
-	ddrc_cache_hi: memory@1040000000 {
-		device_type = "memory";
-		reg = <0x10 0x40000000 0x0 0x40000000>;
-		status = "okay";
-	};
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		hss_payload: region@BFC00000 {
-			reg = <0x0 0xBFC00000 0x0 0x400000>;
-			no-map;
-		};
-	};
-};
-
-&core_pwm0 {
-	status = "okay";
-};
-
-&gpio2 {
-	interrupts = <53>, <53>, <53>, <53>,
-		     <53>, <53>, <53>, <53>,
-		     <53>, <53>, <53>, <53>,
-		     <53>, <53>, <53>, <53>,
-		     <53>, <53>, <53>, <53>,
-		     <53>, <53>, <53>, <53>,
-		     <53>, <53>, <53>, <53>,
-		     <53>, <53>, <53>, <53>;
-	status = "okay";
-};
-
-&i2c0 {
-	status = "okay";
-};
-
-&i2c1 {
-	status = "okay";
-
-	power-monitor@10 {
-		compatible = "microchip,pac1934";
-		reg = <0x10>;
-
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		channel@1 {
-			reg = <0x1>;
-			shunt-resistor-micro-ohms = <10000>;
-			label = "VDDREG";
-		};
-
-		channel@2 {
-			reg = <0x2>;
-			shunt-resistor-micro-ohms = <10000>;
-			label = "VDDA25";
-		};
-
-		channel@3 {
-			reg = <0x3>;
-			shunt-resistor-micro-ohms = <10000>;
-			label = "VDD25";
-		};
-
-		channel@4 {
-			reg = <0x4>;
-			shunt-resistor-micro-ohms = <10000>;
-			label = "VDDA_REG";
-		};
-	};
-};
-
-&i2c2 {
-	status = "okay";
-};
-
-&mac0 {
-	phy-mode = "sgmii";
-	phy-handle = <&phy0>;
-	status = "okay";
-};
-
-&mac1 {
-	phy-mode = "sgmii";
-	phy-handle = <&phy1>;
-	status = "okay";
-
-	phy1: ethernet-phy@9 {
-		reg = <9>;
-	};
-
-	phy0: ethernet-phy@8 {
-		reg = <8>;
-	};
-};
-
-&mbox {
-	status = "okay";
-};
-
-&mmc {
-	bus-width = <4>;
-	disable-wp;
-	cap-sd-highspeed;
-	cap-mmc-highspeed;
-	mmc-ddr-1_8v;
-	mmc-hs200-1_8v;
-	sd-uhs-sdr12;
-	sd-uhs-sdr25;
-	sd-uhs-sdr50;
-	sd-uhs-sdr104;
-	status = "okay";
-};
-
-&mmuart1 {
-	status = "okay";
-};
-
-&mmuart2 {
-	status = "okay";
-};
-
-&mmuart3 {
-	status = "okay";
-};
-
-&mmuart4 {
-	status = "okay";
-};
-
-&pcie {
-	status = "okay";
-};
-
-&qspi {
-	status = "okay";
-};
-
-&refclk {
-	clock-frequency = <125000000>;
-};
-
-&refclk_ccc {
-	clock-frequency = <50000000>;
-};
-
-&rtc {
-	status = "okay";
-};
-
-&spi0 {
-	status = "okay";
-};
-
-&spi1 {
-	status = "okay";
-};
-
-&syscontroller {
-	status = "okay";
-};
-
-&syscontroller_qspi {
-	/*
-	 * The flash *is* there, but Icicle kits that have engineering sample
-	 * silicon (write?) access to this flash to non-functional. The system
-	 * controller itself can actually access it, but the MSS cannot write
-	 * an image there. Instantiating a coreQSPI in the fabric & connecting
-	 * it to the flash instead should work though. Pre-production or later
-	 * silicon does not have this issue.
-	 */
-	status = "disabled";
-
-	sys_ctrl_flash: flash@0 { // MT25QL01GBBB8ESF-0SIT
-		compatible = "jedec,spi-nor";
-		#address-cells = <1>;
-		#size-cells = <1>;
-		spi-max-frequency = <20000000>;
-		spi-rx-bus-width = <1>;
-		reg = <0>;
-	};
-};
-
-&usb {
-	status = "okay";
-	dr_mode = "host";
 };
diff --git a/arch/riscv/boot/dts/sophgo/sg2042-cpus.dtsi b/arch/riscv/boot/dts/sophgo/sg2042-cpus.dtsi
index 77ded5304272..94a4b71acad3 100644
--- a/arch/riscv/boot/dts/sophgo/sg2042-cpus.dtsi
+++ b/arch/riscv/boot/dts/sophgo/sg2042-cpus.dtsi
@@ -272,6 +272,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache0>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <0>;
 
 			cpu0_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -299,6 +300,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache0>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <0>;
 
 			cpu1_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -326,6 +328,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache0>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <0>;
 
 			cpu2_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -353,6 +356,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache0>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <0>;
 
 			cpu3_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -380,6 +384,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache1>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <0>;
 
 			cpu4_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -407,6 +412,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache1>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <0>;
 
 			cpu5_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -434,6 +440,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache1>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <0>;
 
 			cpu6_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -461,6 +468,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache1>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <0>;
 
 			cpu7_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -488,6 +496,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache4>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <1>;
 
 			cpu8_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -515,6 +524,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache4>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <1>;
 
 			cpu9_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -542,6 +552,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache4>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <1>;
 
 			cpu10_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -569,6 +580,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache4>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <1>;
 
 			cpu11_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -596,6 +608,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache5>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <1>;
 
 			cpu12_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -623,6 +636,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache5>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <1>;
 
 			cpu13_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -650,6 +664,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache5>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <1>;
 
 			cpu14_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -677,6 +692,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache5>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <1>;
 
 			cpu15_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -704,6 +720,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache2>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <0>;
 
 			cpu16_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -731,6 +748,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache2>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <0>;
 
 			cpu17_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -758,6 +776,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache2>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <0>;
 
 			cpu18_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -785,6 +804,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache2>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <0>;
 
 			cpu19_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -812,6 +832,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache3>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <0>;
 
 			cpu20_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -839,6 +860,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache3>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <0>;
 
 			cpu21_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -866,6 +888,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache3>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <0>;
 
 			cpu22_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -893,6 +916,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache3>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <0>;
 
 			cpu23_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -920,6 +944,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache6>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <1>;
 
 			cpu24_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -947,6 +972,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache6>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <1>;
 
 			cpu25_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -974,6 +1000,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache6>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <1>;
 
 			cpu26_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -1001,6 +1028,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache6>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <1>;
 
 			cpu27_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -1028,6 +1056,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache7>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <1>;
 
 			cpu28_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -1055,6 +1084,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache7>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <1>;
 
 			cpu29_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -1082,6 +1112,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache7>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <1>;
 
 			cpu30_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -1109,6 +1140,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache7>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <1>;
 
 			cpu31_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -1136,6 +1168,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache8>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <2>;
 
 			cpu32_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -1163,6 +1196,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache8>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <2>;
 
 			cpu33_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -1190,6 +1224,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache8>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <2>;
 
 			cpu34_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -1217,6 +1252,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache8>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <2>;
 
 			cpu35_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -1244,6 +1280,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache9>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <2>;
 
 			cpu36_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -1271,6 +1308,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache9>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <2>;
 
 			cpu37_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -1298,6 +1336,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache9>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <2>;
 
 			cpu38_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -1325,6 +1364,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache9>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <2>;
 
 			cpu39_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -1352,6 +1392,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache12>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <3>;
 
 			cpu40_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -1379,6 +1420,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache12>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <3>;
 
 			cpu41_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -1406,6 +1448,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache12>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <3>;
 
 			cpu42_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -1433,6 +1476,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache12>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <3>;
 
 			cpu43_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -1460,6 +1504,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache13>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <3>;
 
 			cpu44_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -1487,6 +1532,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache13>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <3>;
 
 			cpu45_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -1514,6 +1560,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache13>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <3>;
 
 			cpu46_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -1541,6 +1588,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache13>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <3>;
 
 			cpu47_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -1568,6 +1616,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache10>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <2>;
 
 			cpu48_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -1595,6 +1644,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache10>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <2>;
 
 			cpu49_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -1622,6 +1672,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache10>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <2>;
 
 			cpu50_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -1649,6 +1700,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache10>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <2>;
 
 			cpu51_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -1676,6 +1728,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache11>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <2>;
 
 			cpu52_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -1703,6 +1756,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache11>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <2>;
 
 			cpu53_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -1730,6 +1784,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache11>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <2>;
 
 			cpu54_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -1757,6 +1812,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache11>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <2>;
 
 			cpu55_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -1784,6 +1840,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache14>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <3>;
 
 			cpu56_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -1811,6 +1868,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache14>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <3>;
 
 			cpu57_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -1838,6 +1896,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache14>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <3>;
 
 			cpu58_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -1865,6 +1924,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache14>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <3>;
 
 			cpu59_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -1892,6 +1952,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache15>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <3>;
 
 			cpu60_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -1919,6 +1980,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache15>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <3>;
 
 			cpu61_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -1946,6 +2008,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache15>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <3>;
 
 			cpu62_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
@@ -1973,6 +2036,7 @@
 			d-cache-sets = <512>;
 			next-level-cache = <&l2_cache15>;
 			mmu-type = "riscv,sv39";
+			numa-node-id = <3>;
 
 			cpu63_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
diff --git a/arch/riscv/boot/dts/sophgo/sg2042.dtsi b/arch/riscv/boot/dts/sophgo/sg2042.dtsi
index b3e4d3c18fdc..c5e49709b308 100644
--- a/arch/riscv/boot/dts/sophgo/sg2042.dtsi
+++ b/arch/riscv/boot/dts/sophgo/sg2042.dtsi
@@ -19,6 +19,26 @@
 	#size-cells = <2>;
 	dma-noncoherent;
 
+	distance-map {
+		compatible = "numa-distance-map-v1";
+		distance-matrix = <0 0 10>,
+				  <0 1 15>,
+				  <0 2 25>,
+				  <0 3 30>,
+				  <1 0 15>,
+				  <1 1 10>,
+				  <1 2 30>,
+				  <1 3 25>,
+				  <2 0 25>,
+				  <2 1 30>,
+				  <2 2 10>,
+				  <2 3 15>,
+				  <3 0 30>,
+				  <3 1 25>,
+				  <3 2 15>,
+				  <3 3 10>;
+	};
+
 	aliases {
 		serial0 = &uart0;
 	};
@@ -190,7 +210,7 @@
 			reg-names = "clr", "doorbell";
 			msi-controller;
 			#msi-cells = <0>;
-			msi-ranges = <&intc 64 IRQ_TYPE_LEVEL_HIGH 32>;
+			msi-ranges = <&intc 64 IRQ_TYPE_EDGE_RISING 32>;
 		};
 
 		rpgate: clock-controller@7030010368 {
diff --git a/arch/riscv/boot/dts/sophgo/sg2044.dtsi b/arch/riscv/boot/dts/sophgo/sg2044.dtsi
index 6ec955744b0c..320c4d1d08e6 100644
--- a/arch/riscv/boot/dts/sophgo/sg2044.dtsi
+++ b/arch/riscv/boot/dts/sophgo/sg2044.dtsi
@@ -214,7 +214,7 @@
 			reg-names = "clr", "doorbell";
 			#msi-cells = <0>;
 			msi-controller;
-			msi-ranges = <&intc 352 IRQ_TYPE_LEVEL_HIGH 512>;
+			msi-ranges = <&intc 352 IRQ_TYPE_EDGE_RISING 512>;
 			status = "disabled";
 		};
 
diff --git a/arch/riscv/boot/dts/spacemit/Makefile b/arch/riscv/boot/dts/spacemit/Makefile
index 92e13ce1c16d..152832644870 100644
--- a/arch/riscv/boot/dts/spacemit/Makefile
+++ b/arch/riscv/boot/dts/spacemit/Makefile
@@ -1,3 +1,4 @@
 # SPDX-License-Identifier: GPL-2.0
 dtb-$(CONFIG_ARCH_SPACEMIT) += k1-bananapi-f3.dtb
 dtb-$(CONFIG_ARCH_SPACEMIT) += k1-milkv-jupiter.dtb
+dtb-$(CONFIG_ARCH_SPACEMIT) += k1-orangepi-rv2.dtb
diff --git a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
index fe22c747c501..6013be258542 100644
--- a/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-bananapi-f3.dts
@@ -40,6 +40,10 @@
 	status = "okay";
 };
 
+&pdma {
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_2_cfg>;
diff --git a/arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts b/arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts
index 448319214104..c615fcadbd33 100644
--- a/arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts
+++ b/arch/riscv/boot/dts/spacemit/k1-milkv-jupiter.dts
@@ -20,6 +20,10 @@
 	};
 };
 
+&pdma {
+	status = "okay";
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_2_cfg>;
diff --git a/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts b/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts
new file mode 100644
index 000000000000..337240ebb7b7
--- /dev/null
+++ b/arch/riscv/boot/dts/spacemit/k1-orangepi-rv2.dts
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * Copyright (C) 2024 Yangyu Chen <cyy@cyyself.name>
+ * Copyright (C) 2025 Hendrik Hamerlinck <hendrik.hamerlinck@hammernet.be>
+ */
+
+/dts-v1/;
+
+#include "k1.dtsi"
+#include "k1-pinctrl.dtsi"
+
+/ {
+	model = "OrangePi RV2";
+	compatible = "xunlong,orangepi-rv2", "spacemit,k1";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			label = "sys-led";
+			gpios = <&gpio K1_GPIO(96) GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "heartbeat";
+			default-state = "on";
+		};
+	};
+};
+
+&uart0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_2_cfg>;
+	status = "okay";
+};
diff --git a/arch/riscv/boot/dts/spacemit/k1.dtsi b/arch/riscv/boot/dts/spacemit/k1.dtsi
index abde8bb07c95..66b33a9110cc 100644
--- a/arch/riscv/boot/dts/spacemit/k1.dtsi
+++ b/arch/riscv/boot/dts/spacemit/k1.dtsi
@@ -660,6 +660,17 @@
 			dma-ranges = <0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>,
 				     <0x1 0x00000000 0x1 0x80000000 0x3 0x00000000>;
 
+			pdma: dma-controller@d4000000 {
+				compatible = "spacemit,k1-pdma";
+				reg = <0x0 0xd4000000 0x0 0x4000>;
+				clocks = <&syscon_apmu CLK_DMA>;
+				resets = <&syscon_apmu RESET_DMA>;
+				interrupts = <72>;
+				dma-channels = <16>;
+				#dma-cells= <1>;
+				status = "disabled";
+			};
+
 			uart0: serial@d4017000 {
 				compatible = "spacemit,k1-uart",
 					     "intel,xscale-uart";
@@ -667,6 +678,7 @@
 				clocks = <&syscon_apbc CLK_UART0>,
 					 <&syscon_apbc CLK_UART0_BUS>;
 				clock-names = "core", "bus";
+				resets = <&syscon_apbc RESET_UART0>;
 				interrupts = <42>;
 				reg-shift = <2>;
 				reg-io-width = <4>;
@@ -680,6 +692,7 @@
 				clocks = <&syscon_apbc CLK_UART2>,
 					 <&syscon_apbc CLK_UART2_BUS>;
 				clock-names = "core", "bus";
+				resets = <&syscon_apbc RESET_UART2>;
 				interrupts = <44>;
 				reg-shift = <2>;
 				reg-io-width = <4>;
@@ -693,6 +706,7 @@
 				clocks = <&syscon_apbc CLK_UART3>,
 					 <&syscon_apbc CLK_UART3_BUS>;
 				clock-names = "core", "bus";
+				resets = <&syscon_apbc RESET_UART3>;
 				interrupts = <45>;
 				reg-shift = <2>;
 				reg-io-width = <4>;
@@ -706,6 +720,7 @@
 				clocks = <&syscon_apbc CLK_UART4>,
 					 <&syscon_apbc CLK_UART4_BUS>;
 				clock-names = "core", "bus";
+				resets = <&syscon_apbc RESET_UART4>;
 				interrupts = <46>;
 				reg-shift = <2>;
 				reg-io-width = <4>;
@@ -719,6 +734,7 @@
 				clocks = <&syscon_apbc CLK_UART5>,
 					 <&syscon_apbc CLK_UART5_BUS>;
 				clock-names = "core", "bus";
+				resets = <&syscon_apbc RESET_UART5>;
 				interrupts = <47>;
 				reg-shift = <2>;
 				reg-io-width = <4>;
@@ -732,6 +748,7 @@
 				clocks = <&syscon_apbc CLK_UART6>,
 					 <&syscon_apbc CLK_UART6_BUS>;
 				clock-names = "core", "bus";
+				resets = <&syscon_apbc RESET_UART6>;
 				interrupts = <48>;
 				reg-shift = <2>;
 				reg-io-width = <4>;
@@ -745,6 +762,7 @@
 				clocks = <&syscon_apbc CLK_UART7>,
 					 <&syscon_apbc CLK_UART7_BUS>;
 				clock-names = "core", "bus";
+				resets = <&syscon_apbc RESET_UART7>;
 				interrupts = <49>;
 				reg-shift = <2>;
 				reg-io-width = <4>;
@@ -758,6 +776,7 @@
 				clocks = <&syscon_apbc CLK_UART8>,
 					 <&syscon_apbc CLK_UART8_BUS>;
 				clock-names = "core", "bus";
+				resets = <&syscon_apbc RESET_UART8>;
 				interrupts = <50>;
 				reg-shift = <2>;
 				reg-io-width = <4>;
@@ -771,22 +790,14 @@
 				clocks = <&syscon_apbc CLK_UART9>,
 					 <&syscon_apbc CLK_UART9_BUS>;
 				clock-names = "core", "bus";
+				resets = <&syscon_apbc RESET_UART9>;
 				interrupts = <51>;
 				reg-shift = <2>;
 				reg-io-width = <4>;
 				status = "disabled";
 			};
 
-			sec_uart1: serial@f0612000 {
-				compatible = "spacemit,k1-uart",
-					     "intel,xscale-uart";
-				reg = <0x0 0xf0612000 0x0 0x100>;
-				interrupts = <43>;
-				clock-frequency = <14857000>;
-				reg-shift = <2>;
-				reg-io-width = <4>;
-				status = "reserved"; /* for TEE usage */
-			};
+			/* sec_uart1: 0xf0612000, not available from Linux */
 		};
 
 		multimedia-bus {
diff --git a/arch/riscv/boot/dts/starfive/Makefile b/arch/riscv/boot/dts/starfive/Makefile
index b3bb12f78e7d..62b659f89ba7 100644
--- a/arch/riscv/boot/dts/starfive/Makefile
+++ b/arch/riscv/boot/dts/starfive/Makefile
@@ -10,6 +10,8 @@ dtb-$(CONFIG_ARCH_STARFIVE) += jh7100-starfive-visionfive-v1.dtb
 
 dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-deepcomputing-fml13v01.dtb
 dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-milkv-mars.dtb
+dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-milkv-marscm-emmc.dtb
+dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-milkv-marscm-lite.dtb
 dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-pine64-star64.dtb
 dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.2a.dtb
 dtb-$(CONFIG_ARCH_STARFIVE) += jh7110-starfive-visionfive-2-v1.3b.dtb
diff --git a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
index 2eaf01775ef5..5dc15e48b74b 100644
--- a/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110-common.dtsi
@@ -285,7 +285,6 @@
 	mmc-ddr-1_8v;
 	mmc-hs200-1_8v;
 	cap-mmc-hw-reset;
-	post-power-on-delay-ms = <200>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc0_pins>;
 	vmmc-supply = <&vcc_3v3>;
@@ -299,12 +298,9 @@
 	assigned-clock-rates = <50000000>;
 	bus-width = <4>;
 	bootph-pre-ram;
-	no-sdio;
-	no-mmc;
 	cd-gpios = <&sysgpio 41 GPIO_ACTIVE_LOW>;
 	disable-wp;
 	cap-sd-highspeed;
-	post-power-on-delay-ms = <200>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&mmc1_pins>;
 	status = "okay";
diff --git a/arch/riscv/boot/dts/starfive/jh7110-milkv-marscm-emmc.dts b/arch/riscv/boot/dts/starfive/jh7110-milkv-marscm-emmc.dts
new file mode 100644
index 000000000000..e568537af2c4
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7110-milkv-marscm-emmc.dts
@@ -0,0 +1,12 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2025 E Shattow <e@freeshell.de>
+ */
+
+/dts-v1/;
+#include "jh7110-milkv-marscm.dtsi"
+
+/ {
+	model = "Milk-V Mars CM";
+	compatible = "milkv,marscm-emmc", "starfive,jh7110";
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7110-milkv-marscm-lite.dts b/arch/riscv/boot/dts/starfive/jh7110-milkv-marscm-lite.dts
new file mode 100644
index 000000000000..6c40d0ec4011
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7110-milkv-marscm-lite.dts
@@ -0,0 +1,25 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2025 E Shattow <e@freeshell.de>
+ */
+
+/dts-v1/;
+#include "jh7110-milkv-marscm.dtsi"
+
+/ {
+	model = "Milk-V Mars CM Lite";
+	compatible = "milkv,marscm-lite", "starfive,jh7110";
+};
+
+&mmc0 {
+	bus-width = <4>;
+	cd-gpios = <&sysgpio 41 GPIO_ACTIVE_LOW>;
+};
+
+&mmc0_pins {
+	pwren-pins {
+		pinmux = <GPIOMUX(22, GPOUT_HIGH,
+				      GPOEN_ENABLE,
+				      GPI_NONE)>;
+	};
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7110-milkv-marscm.dtsi b/arch/riscv/boot/dts/starfive/jh7110-milkv-marscm.dtsi
new file mode 100644
index 000000000000..25b70af564ee
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7110-milkv-marscm.dtsi
@@ -0,0 +1,159 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2025 E Shattow <e@freeshell.de>
+ */
+
+/dts-v1/;
+#include <dt-bindings/interrupt-controller/irq.h>
+#include "jh7110-common.dtsi"
+
+/ {
+	aliases {
+		i2c1 = &i2c1;
+		i2c3 = &i2c3;
+		i2c4 = &i2c4;
+		serial3 = &uart3;
+	};
+
+	sdio_pwrseq: sdio-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&sysgpio 33 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&gmac0 {
+	assigned-clocks = <&aoncrg JH7110_AONCLK_GMAC0_TX>;
+	assigned-clock-parents = <&aoncrg JH7110_AONCLK_GMAC0_RMII_RTX>;
+	starfive,tx-use-rgmii-clk;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c2 {
+	status = "disabled";
+};
+
+&i2c6 {
+	status = "disabled";
+};
+
+&mmc1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	mmc-pwrseq = <&sdio_pwrseq>;
+	non-removable;
+	status = "okay";
+
+	ap6256: wifi@1 {
+		compatible = "brcm,bcm43456-fmac", "brcm,bcm4329-fmac";
+		reg = <1>;
+		interrupt-parent = <&sysgpio>;
+		interrupts = <34 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "host-wake";
+		pinctrl-0 = <&wifi_host_wake_irq>;
+		pinctrl-names = "default";
+	};
+};
+
+&pcie0 {
+	status = "okay";
+};
+
+&phy0 {
+	rx-internal-delay-ps = <1500>;
+	tx-internal-delay-ps = <1500>;
+	motorcomm,rx-clk-drv-microamp = <3970>;
+	motorcomm,rx-data-drv-microamp = <2910>;
+	motorcomm,tx-clk-10-inverted;
+	motorcomm,tx-clk-100-inverted;
+	motorcomm,tx-clk-1000-inverted;
+	motorcomm,tx-clk-adj-enabled;
+};
+
+&pwm {
+	status = "okay";
+};
+
+&spi0 {
+	status = "okay";
+};
+
+&sysgpio {
+	uart1_pins: uart1-0 {
+		tx-pins {
+			pinmux = <GPIOMUX(16, GPOUT_SYS_UART1_TX,
+					      GPOEN_ENABLE,
+					      GPI_NONE)>;
+			bias-disable;
+			drive-strength = <12>;
+			input-disable;
+			input-schmitt-disable;
+		};
+
+		rx-pins {
+			pinmux = <GPIOMUX(17, GPOUT_LOW,
+					      GPOEN_DISABLE,
+					      GPI_SYS_UART1_RX)>;
+			bias-pull-up;
+			input-enable;
+			input-schmitt-enable;
+		};
+
+		cts-pins {
+			pinmux = <GPIOMUX(3, GPOUT_LOW,
+					     GPOEN_DISABLE,
+					     GPI_SYS_UART1_CTS)>;
+			bias-disable;
+			input-enable;
+			input-schmitt-enable;
+		};
+
+		rts-pins {
+			pinmux = <GPIOMUX(2, GPOUT_SYS_UART1_RTS,
+					     GPOEN_ENABLE,
+					     GPI_NONE)>;
+			bias-disable;
+			input-disable;
+			input-schmitt-disable;
+		};
+	};
+
+	usb0_pins: usb0-0 {
+		vbus-pins {
+			pinmux = <GPIOMUX(25, GPOUT_SYS_USB_DRIVE_VBUS,
+					      GPOEN_ENABLE,
+					      GPI_NONE)>;
+			bias-disable;
+			input-disable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+	};
+
+	wifi_host_wake_irq: wifi-host-wake-irq-0 {
+		wake-pins {
+			pinmux = <GPIOMUX(34, GPOUT_LOW,
+					      GPOEN_DISABLE,
+					      GPI_NONE)>;
+			input-enable;
+		};
+	};
+};
+
+&uart1 {
+	uart-has-rtscts;
+	pinctrl-0 = <&uart1_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "host";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins>;
+	status = "okay";
+};
diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index 0ba74ef04679..6e56e9d20bb0 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -35,6 +35,7 @@
 
 			cpu0_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
+				bootph-pre-ram;
 				interrupt-controller;
 				#interrupt-cells = <1>;
 			};
@@ -68,6 +69,7 @@
 
 			cpu1_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
+				bootph-pre-ram;
 				interrupt-controller;
 				#interrupt-cells = <1>;
 			};
@@ -101,6 +103,7 @@
 
 			cpu2_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
+				bootph-pre-ram;
 				interrupt-controller;
 				#interrupt-cells = <1>;
 			};
@@ -134,6 +137,7 @@
 
 			cpu3_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
+				bootph-pre-ram;
 				interrupt-controller;
 				#interrupt-cells = <1>;
 			};
@@ -167,6 +171,7 @@
 
 			cpu4_intc: interrupt-controller {
 				compatible = "riscv,cpu-intc";
+				bootph-pre-ram;
 				interrupt-controller;
 				#interrupt-cells = <1>;
 			};
@@ -273,12 +278,14 @@
 
 	gmac1_rgmii_rxin: gmac1-rgmii-rxin-clock {
 		compatible = "fixed-clock";
+		bootph-pre-ram;
 		clock-output-names = "gmac1_rgmii_rxin";
 		#clock-cells = <0>;
 	};
 
 	gmac1_rmii_refin: gmac1-rmii-refin-clock {
 		compatible = "fixed-clock";
+		bootph-pre-ram;
 		clock-output-names = "gmac1_rmii_refin";
 		#clock-cells = <0>;
 	};
@@ -321,6 +328,7 @@
 
 	osc: oscillator {
 		compatible = "fixed-clock";
+		bootph-pre-ram;
 		clock-output-names = "osc";
 		#clock-cells = <0>;
 	};
@@ -354,6 +362,7 @@
 		clint: timer@2000000 {
 			compatible = "starfive,jh7110-clint", "sifive,clint0";
 			reg = <0x0 0x2000000 0x0 0x10000>;
+			bootph-pre-ram;
 			interrupts-extended = <&cpu0_intc 3>, <&cpu0_intc 7>,
 					      <&cpu1_intc 3>, <&cpu1_intc 7>,
 					      <&cpu2_intc 3>, <&cpu2_intc 7>,
@@ -880,6 +889,7 @@
 		syscrg: clock-controller@13020000 {
 			compatible = "starfive,jh7110-syscrg";
 			reg = <0x0 0x13020000 0x0 0x10000>;
+			bootph-pre-ram;
 			clocks = <&osc>, <&gmac1_rmii_refin>,
 				 <&gmac1_rgmii_rxin>,
 				 <&i2stx_bclk_ext>, <&i2stx_lrck_ext>,
@@ -904,6 +914,7 @@
 
 			pllclk: clock-controller {
 				compatible = "starfive,jh7110-pll";
+				bootph-pre-ram;
 				clocks = <&osc>;
 				#clock-cells = <1>;
 			};
@@ -931,6 +942,19 @@
 				 <&syscrg JH7110_SYSRST_WDT_CORE>;
 		};
 
+		memory-controller@15700000 {
+			compatible = "starfive,jh7110-dmc";
+			reg = <0x0 0x15700000 0x0 0x10000>,
+			      <0x0 0x13000000 0x0 0x10000>;
+			bootph-pre-ram;
+			clocks = <&syscrg JH7110_PLLCLK_PLL1_OUT>;
+			clock-names = "pll";
+			resets = <&syscrg JH7110_SYSRST_DDR_AXI>,
+				 <&syscrg JH7110_SYSRST_DDR_OSC>,
+				 <&syscrg JH7110_SYSRST_DDR_APB>;
+			reset-names = "axi", "osc", "apb";
+		};
+
 		crypto: crypto@16000000 {
 			compatible = "starfive,jh7110-crypto";
 			reg = <0x0 0x16000000 0x0 0x4000>;
diff --git a/arch/riscv/boot/dts/thead/th1520.dtsi b/arch/riscv/boot/dts/thead/th1520.dtsi
index 42724bf7e90e..e680d1a7c821 100644
--- a/arch/riscv/boot/dts/thead/th1520.dtsi
+++ b/arch/riscv/boot/dts/thead/th1520.dtsi
@@ -225,6 +225,13 @@
 		#clock-cells = <0>;
 	};
 
+	gpu_mem_clk: mem-clk {
+		compatible = "fixed-clock";
+		clock-frequency = <0>;
+		clock-output-names = "gpu_mem_clk";
+		#clock-cells = <0>;
+	};
+
 	stmmac_axi_config: stmmac-axi-config {
 		snps,wr_osr_lmt = <15>;
 		snps,rd_osr_lmt = <15>;
@@ -297,8 +304,9 @@
 			reg-names = "dwmac", "apb";
 			interrupts = <67 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
-			clocks = <&clk CLK_GMAC_AXI>, <&clk CLK_GMAC1>;
-			clock-names = "stmmaceth", "pclk";
+			clocks = <&clk CLK_GMAC_AXI>, <&clk CLK_GMAC1>,
+				 <&clk CLK_PERISYS_APB4_HCLK>;
+			clock-names = "stmmaceth", "pclk", "apb";
 			snps,pbl = <32>;
 			snps,fixed-burst;
 			snps,multicast-filter-bins = <64>;
@@ -319,8 +327,9 @@
 			reg-names = "dwmac", "apb";
 			interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
 			interrupt-names = "macirq";
-			clocks = <&clk CLK_GMAC_AXI>, <&clk CLK_GMAC0>;
-			clock-names = "stmmaceth", "pclk";
+			clocks = <&clk CLK_GMAC_AXI>, <&clk CLK_GMAC0>,
+				 <&clk CLK_PERISYS_APB4_HCLK>;
+			clock-names = "stmmaceth", "pclk", "apb";
 			snps,pbl = <32>;
 			snps,fixed-burst;
 			snps,multicast-filter-bins = <64>;
@@ -500,6 +509,20 @@
 			#clock-cells = <1>;
 		};
 
+		gpu: gpu@ffef400000 {
+			compatible = "thead,th1520-gpu", "img,img-bxm-4-64",
+				     "img,img-rogue";
+			reg = <0xff 0xef400000 0x0 0x100000>;
+			interrupt-parent = <&plic>;
+			interrupts = <102 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&clk_vo CLK_GPU_CORE>,
+				 <&gpu_mem_clk>,
+				 <&clk_vo CLK_GPU_CFG_ACLK>;
+			clock-names = "core", "mem", "sys";
+			power-domains = <&aon TH1520_GPU_PD>;
+			resets = <&rst TH1520_RESET_ID_GPU>;
+		};
+
 		rst: reset-controller@ffef528000 {
 			compatible = "thead,th1520-reset";
 			reg = <0xff 0xef528000 0x0 0x4f>;
diff --git a/arch/riscv/configs/defconfig b/arch/riscv/configs/defconfig
index 7b5eed17611a..b9ef2da15fb2 100644
--- a/arch/riscv/configs/defconfig
+++ b/arch/riscv/configs/defconfig
@@ -135,6 +135,7 @@ CONFIG_MACB=y
 CONFIG_E1000E=y
 CONFIG_R8169=y
 CONFIG_STMMAC_ETH=m
+CONFIG_DWMAC_THEAD=m
 CONFIG_MICREL_PHY=y
 CONFIG_MICROSEMI_PHY=y
 CONFIG_MOTORCOMM_PHY=y
@@ -152,7 +153,6 @@ CONFIG_HW_RANDOM_JH7110=m
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=m
 CONFIG_I2C_DESIGNWARE_CORE=y
-CONFIG_I2C_DESIGNWARE_PLATFORM=y
 CONFIG_I2C_MV64XXX=m
 CONFIG_SPI=y
 CONFIG_SPI_CADENCE_QUADSPI=m
@@ -160,11 +160,11 @@ CONFIG_SPI_PL022=m
 CONFIG_SPI_SIFIVE=y
 CONFIG_SPI_SUN6I=y
 # CONFIG_PTP_1588_CLOCK is not set
+CONFIG_PINCTRL_TH1520=y
 CONFIG_PINCTRL_SOPHGO_CV1800B=y
 CONFIG_PINCTRL_SOPHGO_CV1812H=y
 CONFIG_PINCTRL_SOPHGO_SG2000=y
 CONFIG_PINCTRL_SOPHGO_SG2002=y
-CONFIG_PINCTRL_TH1520=y
 CONFIG_GPIO_DWAPB=y
 CONFIG_GPIO_SIFIVE=y
 CONFIG_GPIO_SPACEMIT_K1=y
@@ -241,7 +241,7 @@ CONFIG_RTC_DRV_SUN6I=y
 CONFIG_DMADEVICES=y
 CONFIG_DMA_SUN6I=m
 CONFIG_DW_AXI_DMAC=y
-CONFIG_DWMAC_THEAD=m
+CONFIG_MMP_PDMA=m
 CONFIG_VIRTIO_PCI=y
 CONFIG_VIRTIO_BALLOON=y
 CONFIG_VIRTIO_INPUT=y
diff --git a/arch/riscv/errata/Makefile b/arch/riscv/errata/Makefile
index bc6c77ba837d..02a7a3335b1d 100644
--- a/arch/riscv/errata/Makefile
+++ b/arch/riscv/errata/Makefile
@@ -13,5 +13,6 @@ endif
 endif
 
 obj-$(CONFIG_ERRATA_ANDES) += andes/
+obj-$(CONFIG_ERRATA_MIPS) += mips/
 obj-$(CONFIG_ERRATA_SIFIVE) += sifive/
 obj-$(CONFIG_ERRATA_THEAD) += thead/
diff --git a/arch/riscv/errata/mips/Makefile b/arch/riscv/errata/mips/Makefile
new file mode 100644
index 000000000000..6278c389b801
--- /dev/null
+++ b/arch/riscv/errata/mips/Makefile
@@ -0,0 +1,5 @@
+ifdef CONFIG_RISCV_ALTERNATIVE_EARLY
+CFLAGS_errata.o := -mcmodel=medany
+endif
+
+obj-y += errata.o
diff --git a/arch/riscv/errata/mips/errata.c b/arch/riscv/errata/mips/errata.c
new file mode 100644
index 000000000000..e984a8152208
--- /dev/null
+++ b/arch/riscv/errata/mips/errata.c
@@ -0,0 +1,67 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2025 MIPS.
+ */
+
+#include <linux/memory.h>
+#include <linux/module.h>
+#include <asm/text-patching.h>
+#include <asm/alternative.h>
+#include <asm/errata_list.h>
+#include <asm/vendorid_list.h>
+#include <asm/vendor_extensions.h>
+#include <asm/vendor_extensions/mips.h>
+
+static inline bool errata_probe_pause(void)
+{
+	if (!IS_ENABLED(CONFIG_ERRATA_MIPS_P8700_PAUSE_OPCODE))
+		return false;
+
+	if (!riscv_isa_vendor_extension_available(MIPS_VENDOR_ID, XMIPSEXECTL))
+		return false;
+
+	return true;
+}
+
+static u32 mips_errata_probe(void)
+{
+	u32 cpu_req_errata = 0;
+
+	if (errata_probe_pause())
+		cpu_req_errata |= BIT(ERRATA_MIPS_P8700_PAUSE_OPCODE);
+
+	return cpu_req_errata;
+}
+
+void mips_errata_patch_func(struct alt_entry *begin, struct alt_entry *end,
+			    unsigned long archid, unsigned long impid,
+			    unsigned int stage)
+{
+	struct alt_entry *alt;
+	u32 cpu_req_errata = mips_errata_probe();
+	u32 tmp;
+
+	BUILD_BUG_ON(ERRATA_MIPS_NUMBER >= RISCV_VENDOR_EXT_ALTERNATIVES_BASE);
+
+	if (stage == RISCV_ALTERNATIVES_EARLY_BOOT)
+		return;
+
+	for (alt = begin; alt < end; alt++) {
+		if (alt->vendor_id != MIPS_VENDOR_ID)
+			continue;
+
+		if (alt->patch_id >= ERRATA_MIPS_NUMBER) {
+			WARN(1, "MIPS errata id:%d not in kernel errata list\n",
+			     alt->patch_id);
+			continue;
+		}
+
+		tmp = (1U << alt->patch_id);
+		if (cpu_req_errata && tmp) {
+			mutex_lock(&text_mutex);
+			patch_text_nosync(ALT_OLD_PTR(alt), ALT_ALT_PTR(alt),
+					  alt->alt_len);
+			mutex_unlock(&text_mutex);
+		}
+	}
+}
diff --git a/arch/riscv/include/asm/alternative-macros.h b/arch/riscv/include/asm/alternative-macros.h
index 231d777d936c..9619bd5c8eba 100644
--- a/arch/riscv/include/asm/alternative-macros.h
+++ b/arch/riscv/include/asm/alternative-macros.h
@@ -4,7 +4,7 @@
 
 #ifdef CONFIG_RISCV_ALTERNATIVE
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 .macro ALT_ENTRY oldptr newptr vendor_id patch_id new_len
 	.4byte \oldptr - .
@@ -53,7 +53,7 @@
 #define __ALTERNATIVE_CFG(...)		ALTERNATIVE_CFG __VA_ARGS__
 #define __ALTERNATIVE_CFG_2(...)	ALTERNATIVE_CFG_2 __VA_ARGS__
 
-#else /* !__ASSEMBLY__ */
+#else /* !__ASSEMBLER__ */
 
 #include <asm/asm.h>
 #include <linux/stringify.h>
@@ -98,7 +98,7 @@
 	__ALTERNATIVE_CFG(old_c, new_c_1, vendor_id_1, patch_id_1, enable_1)	\
 	ALT_NEW_CONTENT(vendor_id_2, patch_id_2, enable_2, new_c_2)
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #define _ALTERNATIVE_CFG(old_c, new_c, vendor_id, patch_id, CONFIG_k)	\
 	__ALTERNATIVE_CFG(old_c, new_c, vendor_id, patch_id, IS_ENABLED(CONFIG_k))
@@ -109,7 +109,7 @@
 				   new_c_2, vendor_id_2, patch_id_2, IS_ENABLED(CONFIG_k_2))
 
 #else /* CONFIG_RISCV_ALTERNATIVE */
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 .macro ALTERNATIVE_CFG old_c
 	\old_c
@@ -118,12 +118,12 @@
 #define __ALTERNATIVE_CFG(old_c, ...)		ALTERNATIVE_CFG old_c
 #define __ALTERNATIVE_CFG_2(old_c, ...)		ALTERNATIVE_CFG old_c
 
-#else /* !__ASSEMBLY__ */
+#else /* !__ASSEMBLER__ */
 
 #define __ALTERNATIVE_CFG(old_c, ...)		old_c "\n"
 #define __ALTERNATIVE_CFG_2(old_c, ...)		old_c "\n"
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #define _ALTERNATIVE_CFG(old_c, ...)		__ALTERNATIVE_CFG(old_c)
 #define _ALTERNATIVE_CFG_2(old_c, ...)		__ALTERNATIVE_CFG_2(old_c)
diff --git a/arch/riscv/include/asm/alternative.h b/arch/riscv/include/asm/alternative.h
index 3c2b59b25017..8407d1d535b8 100644
--- a/arch/riscv/include/asm/alternative.h
+++ b/arch/riscv/include/asm/alternative.h
@@ -8,7 +8,7 @@
 
 #include <asm/alternative-macros.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #ifdef CONFIG_RISCV_ALTERNATIVE
 
@@ -48,6 +48,9 @@ struct alt_entry {
 void andes_errata_patch_func(struct alt_entry *begin, struct alt_entry *end,
 			     unsigned long archid, unsigned long impid,
 			     unsigned int stage);
+void mips_errata_patch_func(struct alt_entry *begin, struct alt_entry *end,
+			    unsigned long archid, unsigned long impid,
+			    unsigned int stage);
 void sifive_errata_patch_func(struct alt_entry *begin, struct alt_entry *end,
 			      unsigned long archid, unsigned long impid,
 			      unsigned int stage);
diff --git a/arch/riscv/include/asm/asm-extable.h b/arch/riscv/include/asm/asm-extable.h
index 0c8bfd54fc4e..37d425d7a762 100644
--- a/arch/riscv/include/asm/asm-extable.h
+++ b/arch/riscv/include/asm/asm-extable.h
@@ -10,7 +10,7 @@
 
 #ifdef CONFIG_MMU
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 #define __ASM_EXTABLE_RAW(insn, fixup, type, data)	\
 	.pushsection	__ex_table, "a";		\
@@ -25,7 +25,7 @@
 	__ASM_EXTABLE_RAW(\insn, \fixup, EX_TYPE_FIXUP, 0)
 	.endm
 
-#else /* __ASSEMBLY__ */
+#else /* __ASSEMBLER__ */
 
 #include <linux/bits.h>
 #include <linux/stringify.h>
@@ -77,7 +77,7 @@
 			    EX_DATA_REG(ADDR, addr)				\
 			  ")")
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #else /* CONFIG_MMU */
 	#define _ASM_EXTABLE_UACCESS_ERR(insn, fixup, err)
diff --git a/arch/riscv/include/asm/asm.h b/arch/riscv/include/asm/asm.h
index a8a2af6dfe9d..8bd2a11382a3 100644
--- a/arch/riscv/include/asm/asm.h
+++ b/arch/riscv/include/asm/asm.h
@@ -6,7 +6,7 @@
 #ifndef _ASM_RISCV_ASM_H
 #define _ASM_RISCV_ASM_H
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #define __ASM_STR(x)	x
 #else
 #define __ASM_STR(x)	#x
@@ -30,7 +30,7 @@
 #define SRLI		__REG_SEL(srliw, srli)
 
 #if __SIZEOF_POINTER__ == 8
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #define RISCV_PTR		.dword
 #define RISCV_SZPTR		8
 #define RISCV_LGPTR		3
@@ -40,7 +40,7 @@
 #define RISCV_LGPTR		"3"
 #endif
 #elif __SIZEOF_POINTER__ == 4
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #define RISCV_PTR		.word
 #define RISCV_SZPTR		4
 #define RISCV_LGPTR		2
@@ -69,7 +69,7 @@
 #error "Unexpected __SIZEOF_SHORT__"
 #endif
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #include <asm/asm-offsets.h>
 
 /* Common assembly source macros */
@@ -91,7 +91,7 @@
 #endif
 
 .macro asm_per_cpu dst sym tmp
-	REG_L \tmp, TASK_TI_CPU_NUM(tp)
+	lw    \tmp, TASK_TI_CPU_NUM(tp)
 	slli  \tmp, \tmp, PER_CPU_OFFSET_SHIFT
 	la    \dst, __per_cpu_offset
 	add   \dst, \dst, \tmp
@@ -194,6 +194,6 @@
 #define ASM_NOKPROBE(name)
 #endif
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_RISCV_ASM_H */
diff --git a/arch/riscv/include/asm/assembler.h b/arch/riscv/include/asm/assembler.h
index 44b1457d3e95..16931712beab 100644
--- a/arch/riscv/include/asm/assembler.h
+++ b/arch/riscv/include/asm/assembler.h
@@ -5,7 +5,7 @@
  * Author: Jee Heng Sia <jeeheng.sia@starfivetech.com>
  */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #error "Only include this from assembly code"
 #endif
 
diff --git a/arch/riscv/include/asm/barrier.h b/arch/riscv/include/asm/barrier.h
index b8c5726d86ac..700ba3f922cb 100644
--- a/arch/riscv/include/asm/barrier.h
+++ b/arch/riscv/include/asm/barrier.h
@@ -10,7 +10,7 @@
 #ifndef _ASM_RISCV_BARRIER_H
 #define _ASM_RISCV_BARRIER_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <asm/cmpxchg.h>
 #include <asm/fence.h>
 
@@ -82,6 +82,6 @@ do {									\
 
 #include <asm-generic/barrier.h>
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_RISCV_BARRIER_H */
diff --git a/arch/riscv/include/asm/bitops.h b/arch/riscv/include/asm/bitops.h
index d59310f74c2b..77880677b06e 100644
--- a/arch/riscv/include/asm/bitops.h
+++ b/arch/riscv/include/asm/bitops.h
@@ -45,7 +45,7 @@
 #error "Unexpected BITS_PER_LONG"
 #endif
 
-static __always_inline unsigned long variable__ffs(unsigned long word)
+static __always_inline __attribute_const__ unsigned long variable__ffs(unsigned long word)
 {
 	asm goto(ALTERNATIVE("j %l[legacy]", "nop", 0,
 				      RISCV_ISA_EXT_ZBB, 1)
@@ -74,7 +74,7 @@ legacy:
 	 (unsigned long)__builtin_ctzl(word) :	\
 	 variable__ffs(word))
 
-static __always_inline unsigned long variable__fls(unsigned long word)
+static __always_inline __attribute_const__ unsigned long variable__fls(unsigned long word)
 {
 	asm goto(ALTERNATIVE("j %l[legacy]", "nop", 0,
 				      RISCV_ISA_EXT_ZBB, 1)
@@ -103,7 +103,7 @@ legacy:
 	 (unsigned long)(BITS_PER_LONG - 1 - __builtin_clzl(word)) :	\
 	 variable__fls(word))
 
-static __always_inline int variable_ffs(int x)
+static __always_inline __attribute_const__ int variable_ffs(int x)
 {
 	asm goto(ALTERNATIVE("j %l[legacy]", "nop", 0,
 				      RISCV_ISA_EXT_ZBB, 1)
diff --git a/arch/riscv/include/asm/cache.h b/arch/riscv/include/asm/cache.h
index 570e9d8acad1..eb42b739d132 100644
--- a/arch/riscv/include/asm/cache.h
+++ b/arch/riscv/include/asm/cache.h
@@ -24,7 +24,7 @@
 #define ARCH_SLAB_MINALIGN	16
 #endif
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 extern int dma_cache_alignment;
 #ifdef CONFIG_RISCV_DMA_NONCOHERENT
@@ -35,6 +35,6 @@ static inline int dma_get_cache_alignment(void)
 }
 #endif
 
-#endif	/* __ASSEMBLY__ */
+#endif	/* __ASSEMBLER__ */
 
 #endif /* _ASM_RISCV_CACHE_H */
diff --git a/arch/riscv/include/asm/cfi.h b/arch/riscv/include/asm/cfi.h
index 4508aaa7a2fd..710aa8192edd 100644
--- a/arch/riscv/include/asm/cfi.h
+++ b/arch/riscv/include/asm/cfi.h
@@ -11,7 +11,7 @@
 
 struct pt_regs;
 
-#ifdef CONFIG_CFI_CLANG
+#ifdef CONFIG_CFI
 enum bug_trap_type handle_cfi_failure(struct pt_regs *regs);
 #define __bpfcall
 #else
@@ -19,6 +19,6 @@ static inline enum bug_trap_type handle_cfi_failure(struct pt_regs *regs)
 {
 	return BUG_TRAP_TYPE_NONE;
 }
-#endif /* CONFIG_CFI_CLANG */
+#endif /* CONFIG_CFI */
 
 #endif /* _ASM_RISCV_CFI_H */
diff --git a/arch/riscv/include/asm/cmpxchg.h b/arch/riscv/include/asm/cmpxchg.h
index 0b749e710216..122e1485d39a 100644
--- a/arch/riscv/include/asm/cmpxchg.h
+++ b/arch/riscv/include/asm/cmpxchg.h
@@ -14,6 +14,7 @@
 #include <asm/insn-def.h>
 #include <asm/cpufeature-macros.h>
 #include <asm/processor.h>
+#include <asm/errata_list.h>
 
 #define __arch_xchg_masked(sc_sfx, swap_sfx, prepend, sc_append,		\
 			   swap_append, r, p, n)				\
@@ -133,6 +134,7 @@
 ({										\
 	if (IS_ENABLED(CONFIG_RISCV_ISA_ZABHA) &&				\
 	    IS_ENABLED(CONFIG_RISCV_ISA_ZACAS) &&				\
+	    IS_ENABLED(CONFIG_TOOLCHAIN_HAS_ZACAS) &&				\
 	    riscv_has_extension_unlikely(RISCV_ISA_EXT_ZABHA) &&		\
 	    riscv_has_extension_unlikely(RISCV_ISA_EXT_ZACAS)) {		\
 		r = o;								\
@@ -180,6 +182,7 @@
 		       r, p, co, o, n)					\
 ({									\
 	if (IS_ENABLED(CONFIG_RISCV_ISA_ZACAS) &&			\
+	    IS_ENABLED(CONFIG_TOOLCHAIN_HAS_ZACAS) &&			\
 	    riscv_has_extension_unlikely(RISCV_ISA_EXT_ZACAS)) {	\
 		r = o;							\
 									\
@@ -315,7 +318,7 @@
 	arch_cmpxchg_release((ptr), (o), (n));				\
 })
 
-#if defined(CONFIG_64BIT) && defined(CONFIG_RISCV_ISA_ZACAS)
+#if defined(CONFIG_64BIT) && defined(CONFIG_RISCV_ISA_ZACAS) && defined(CONFIG_TOOLCHAIN_HAS_ZACAS)
 
 #define system_has_cmpxchg128()        riscv_has_extension_unlikely(RISCV_ISA_EXT_ZACAS)
 
@@ -351,7 +354,7 @@ union __u128_halves {
 #define arch_cmpxchg128_local(ptr, o, n)					\
 	__arch_cmpxchg128((ptr), (o), (n), "")
 
-#endif /* CONFIG_64BIT && CONFIG_RISCV_ISA_ZACAS */
+#endif /* CONFIG_64BIT && CONFIG_RISCV_ISA_ZACAS && CONFIG_TOOLCHAIN_HAS_ZACAS */
 
 #ifdef CONFIG_RISCV_ISA_ZAWRS
 /*
@@ -438,7 +441,7 @@ static __always_inline void __cmpwait(volatile void *ptr,
 	return;
 
 no_zawrs:
-	asm volatile(RISCV_PAUSE : : : "memory");
+	ALT_RISCV_PAUSE();
 }
 
 #define __cmpwait_relaxed(ptr, val) \
diff --git a/arch/riscv/include/asm/cpu_ops_sbi.h b/arch/riscv/include/asm/cpu_ops_sbi.h
index d6e4665b3195..776fa55fbaa4 100644
--- a/arch/riscv/include/asm/cpu_ops_sbi.h
+++ b/arch/riscv/include/asm/cpu_ops_sbi.h
@@ -5,7 +5,7 @@
 #ifndef __ASM_CPU_OPS_SBI_H
 #define __ASM_CPU_OPS_SBI_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <linux/init.h>
 #include <linux/sched.h>
 #include <linux/threads.h>
diff --git a/arch/riscv/include/asm/csr.h b/arch/riscv/include/asm/csr.h
index 6fed42e37705..4a37a98398ad 100644
--- a/arch/riscv/include/asm/csr.h
+++ b/arch/riscv/include/asm/csr.h
@@ -513,7 +513,7 @@
 #define IE_TIE		(_AC(0x1, UL) << RV_IRQ_TIMER)
 #define IE_EIE		(_AC(0x1, UL) << RV_IRQ_EXT)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #define csr_swap(csr, val)					\
 ({								\
@@ -575,6 +575,6 @@
 			      : "memory");			\
 })
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_RISCV_CSR_H */
diff --git a/arch/riscv/include/asm/current.h b/arch/riscv/include/asm/current.h
index 21774d868c65..ba5aa72aff63 100644
--- a/arch/riscv/include/asm/current.h
+++ b/arch/riscv/include/asm/current.h
@@ -13,7 +13,7 @@
 #include <linux/bug.h>
 #include <linux/compiler.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 struct task_struct;
 
@@ -35,6 +35,6 @@ static __always_inline struct task_struct *get_current(void)
 
 register unsigned long current_stack_pointer __asm__("sp");
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_RISCV_CURRENT_H */
diff --git a/arch/riscv/include/asm/errata_list.h b/arch/riscv/include/asm/errata_list.h
index 6e426ed7919a..6694b5ccdcf8 100644
--- a/arch/riscv/include/asm/errata_list.h
+++ b/arch/riscv/include/asm/errata_list.h
@@ -5,31 +5,14 @@
 #ifndef ASM_ERRATA_LIST_H
 #define ASM_ERRATA_LIST_H
 
-#include <asm/alternative.h>
 #include <asm/csr.h>
 #include <asm/insn-def.h>
 #include <asm/hwcap.h>
 #include <asm/vendorid_list.h>
+#include <asm/errata_list_vendors.h>
+#include <asm/vendor_extensions/mips.h>
 
-#ifdef CONFIG_ERRATA_ANDES
-#define ERRATA_ANDES_NO_IOCP 0
-#define ERRATA_ANDES_NUMBER 1
-#endif
-
-#ifdef CONFIG_ERRATA_SIFIVE
-#define	ERRATA_SIFIVE_CIP_453 0
-#define	ERRATA_SIFIVE_CIP_1200 1
-#define	ERRATA_SIFIVE_NUMBER 2
-#endif
-
-#ifdef CONFIG_ERRATA_THEAD
-#define	ERRATA_THEAD_MAE 0
-#define	ERRATA_THEAD_PMU 1
-#define	ERRATA_THEAD_GHOSTWRITE 2
-#define	ERRATA_THEAD_NUMBER 3
-#endif
-
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 #define ALT_INSN_FAULT(x)						\
 ALTERNATIVE(__stringify(RISCV_PTR do_trap_insn_fault),			\
@@ -42,7 +25,7 @@ ALTERNATIVE(__stringify(RISCV_PTR do_page_fault),			\
 	    __stringify(RISCV_PTR sifive_cip_453_page_fault_trp),	\
 	    SIFIVE_VENDOR_ID, ERRATA_SIFIVE_CIP_453,			\
 	    CONFIG_ERRATA_SIFIVE_CIP_453)
-#else /* !__ASSEMBLY__ */
+#else /* !__ASSEMBLER__ */
 
 #define ALT_SFENCE_VMA_ASID(asid)					\
 asm(ALTERNATIVE("sfence.vma x0, %0", "sfence.vma", SIFIVE_VENDOR_ID,	\
@@ -59,6 +42,17 @@ asm(ALTERNATIVE("sfence.vma %0, %1", "sfence.vma", SIFIVE_VENDOR_ID,	\
 		ERRATA_SIFIVE_CIP_1200, CONFIG_ERRATA_SIFIVE_CIP_1200)	\
 		: : "r" (addr), "r" (asid) : "memory")
 
+#define ALT_RISCV_PAUSE()					\
+asm(ALTERNATIVE(	\
+		RISCV_PAUSE, /* Original RISC‑V pause insn */	\
+		MIPS_PAUSE, /* Replacement for MIPS P8700 */	\
+		MIPS_VENDOR_ID, /* Vendor ID to match */	\
+		ERRATA_MIPS_P8700_PAUSE_OPCODE, /* patch_id */	\
+		CONFIG_ERRATA_MIPS_P8700_PAUSE_OPCODE)	\
+	: /* no outputs */	\
+	: /* no inputs */	\
+	: "memory")
+
 /*
  * _val is marked as "will be overwritten", so need to set it to 0
  * in the default case.
@@ -123,6 +117,6 @@ asm volatile(ALTERNATIVE(						\
 #define THEAD_C9XX_RV_IRQ_PMU			17
 #define THEAD_C9XX_CSR_SCOUNTEROF		0x5c5
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif
diff --git a/arch/riscv/include/asm/errata_list_vendors.h b/arch/riscv/include/asm/errata_list_vendors.h
new file mode 100644
index 000000000000..ec7eba373437
--- /dev/null
+++ b/arch/riscv/include/asm/errata_list_vendors.h
@@ -0,0 +1,29 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+
+#ifndef ASM_ERRATA_LIST_VENDORS_H
+#define ASM_ERRATA_LIST_VENDORS_H
+
+#ifdef CONFIG_ERRATA_ANDES
+#define	ERRATA_ANDES_NO_IOCP 0
+#define	ERRATA_ANDES_NUMBER 1
+#endif
+
+#ifdef CONFIG_ERRATA_SIFIVE
+#define	ERRATA_SIFIVE_CIP_453 0
+#define	ERRATA_SIFIVE_CIP_1200 1
+#define	ERRATA_SIFIVE_NUMBER 2
+#endif
+
+#ifdef CONFIG_ERRATA_THEAD
+#define	ERRATA_THEAD_MAE 0
+#define	ERRATA_THEAD_PMU 1
+#define	ERRATA_THEAD_GHOSTWRITE 2
+#define	ERRATA_THEAD_NUMBER 3
+#endif
+
+#ifdef CONFIG_ERRATA_MIPS
+#define	ERRATA_MIPS_P8700_PAUSE_OPCODE 0
+#define	ERRATA_MIPS_NUMBER 1
+#endif
+
+#endif /* ASM_ERRATA_LIST_VENDORS_H */
diff --git a/arch/riscv/include/asm/ftrace.h b/arch/riscv/include/asm/ftrace.h
index 22ebea3c2b26..e5026cd8f022 100644
--- a/arch/riscv/include/asm/ftrace.h
+++ b/arch/riscv/include/asm/ftrace.h
@@ -13,7 +13,7 @@
 #endif
 
 #define ARCH_SUPPORTS_FTRACE_OPS 1
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 extern void *return_address(unsigned int level);
 
@@ -112,7 +112,7 @@ do {									\
 #define MCOUNT_JALR_SIZE	4
 #define MCOUNT_NOP4_SIZE	4
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 struct dyn_ftrace;
 int ftrace_init_nop(struct module *mod, struct dyn_ftrace *rec);
 #define ftrace_init_nop ftrace_init_nop
@@ -235,7 +235,7 @@ static inline void arch_ftrace_set_direct_caller(struct ftrace_regs *fregs, unsi
 
 #endif /* CONFIG_DYNAMIC_FTRACE_WITH_ARGS */
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* CONFIG_DYNAMIC_FTRACE */
 
diff --git a/arch/riscv/include/asm/gpr-num.h b/arch/riscv/include/asm/gpr-num.h
index efeb5edf8a3a..b499cf832734 100644
--- a/arch/riscv/include/asm/gpr-num.h
+++ b/arch/riscv/include/asm/gpr-num.h
@@ -2,7 +2,7 @@
 #ifndef __ASM_GPR_NUM_H
 #define __ASM_GPR_NUM_H
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 	.irp	num,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31
 	.equ	.L__gpr_num_x\num, \num
@@ -41,7 +41,7 @@
 	.equ	.L__gpr_num_t5,		30
 	.equ	.L__gpr_num_t6,		31
 
-#else /* __ASSEMBLY__ */
+#else /* __ASSEMBLER__ */
 
 #define __DEFINE_ASM_GPR_NUMS					\
 "	.irp	num,0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31\n" \
@@ -80,6 +80,6 @@
 "	.equ	.L__gpr_num_t5,		30\n"			\
 "	.equ	.L__gpr_num_t6,		31\n"
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* __ASM_GPR_NUM_H */
diff --git a/arch/riscv/include/asm/hwprobe.h b/arch/riscv/include/asm/hwprobe.h
index 7fe0a379474a..948d2b34e94e 100644
--- a/arch/riscv/include/asm/hwprobe.h
+++ b/arch/riscv/include/asm/hwprobe.h
@@ -8,7 +8,7 @@
 
 #include <uapi/asm/hwprobe.h>
 
-#define RISCV_HWPROBE_MAX_KEY 13
+#define RISCV_HWPROBE_MAX_KEY 14
 
 static inline bool riscv_hwprobe_key_is_valid(__s64 key)
 {
@@ -22,6 +22,7 @@ static inline bool hwprobe_key_is_bitmask(__s64 key)
 	case RISCV_HWPROBE_KEY_IMA_EXT_0:
 	case RISCV_HWPROBE_KEY_CPUPERF_0:
 	case RISCV_HWPROBE_KEY_VENDOR_EXT_THEAD_0:
+	case RISCV_HWPROBE_KEY_VENDOR_EXT_MIPS_0:
 	case RISCV_HWPROBE_KEY_VENDOR_EXT_SIFIVE_0:
 		return true;
 	}
diff --git a/arch/riscv/include/asm/image.h b/arch/riscv/include/asm/image.h
index 8927a6ea1127..899254966e85 100644
--- a/arch/riscv/include/asm/image.h
+++ b/arch/riscv/include/asm/image.h
@@ -29,7 +29,7 @@
 #define RISCV_HEADER_VERSION (RISCV_HEADER_VERSION_MAJOR << 16 | \
 			      RISCV_HEADER_VERSION_MINOR)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #define riscv_image_flag_field(flags, field)\
 			       (((flags) >> field##_SHIFT) & field##_MASK)
 /**
@@ -63,5 +63,5 @@ struct riscv_image_header {
 	u32 magic2;
 	u32 res3;
 };
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 #endif /* _ASM_RISCV_IMAGE_H */
diff --git a/arch/riscv/include/asm/insn-def.h b/arch/riscv/include/asm/insn-def.h
index d5adbaec1d01..c9cfcea52cbb 100644
--- a/arch/riscv/include/asm/insn-def.h
+++ b/arch/riscv/include/asm/insn-def.h
@@ -25,7 +25,7 @@
 #define INSN_S_SIMM5_SHIFT		 7
 #define INSN_S_OPCODE_SHIFT		 0
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 
 #ifdef CONFIG_AS_HAS_INSN
 
@@ -77,7 +77,7 @@
 #define __INSN_I(...)	insn_i __VA_ARGS__
 #define __INSN_S(...)	insn_s __VA_ARGS__
 
-#else /* ! __ASSEMBLY__ */
+#else /* ! __ASSEMBLER__ */
 
 #ifdef CONFIG_AS_HAS_INSN
 
@@ -153,7 +153,7 @@
 
 #endif
 
-#endif /* ! __ASSEMBLY__ */
+#endif /* ! __ASSEMBLER__ */
 
 #define INSN_R(opcode, func3, func7, rd, rs1, rs2)		\
 	__INSN_R(RV_##opcode, RV_##func3, RV_##func7,		\
@@ -263,7 +263,7 @@
 
 #define RISCV_INSN_NOP4	_AC(0x00000013, U)
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #define nop()           __asm__ __volatile__ ("nop")
 #define __nops(n)       ".rept  " #n "\nnop\n.endr\n"
 #define nops(n)         __asm__ __volatile__ (__nops(n))
diff --git a/arch/riscv/include/asm/insn.h b/arch/riscv/include/asm/insn.h
index 09fde95a5e8f..c3005573e8c9 100644
--- a/arch/riscv/include/asm/insn.h
+++ b/arch/riscv/include/asm/insn.h
@@ -64,6 +64,7 @@
 #define RVG_RS2_OPOFF		20
 #define RVG_RD_OPOFF		7
 #define RVG_RS1_MASK		GENMASK(4, 0)
+#define RVG_RS2_MASK		GENMASK(4, 0)
 #define RVG_RD_MASK		GENMASK(4, 0)
 
 /* The bit field of immediate value in RVC J instruction */
@@ -286,45 +287,216 @@ static __always_inline bool riscv_insn_is_c_jalr(u32 code)
 	       (code & RVC_INSN_J_RS1_MASK) != 0;
 }
 
-#define RV_IMM_SIGN(x) (-(((x) >> 31) & 1))
-#define RVC_IMM_SIGN(x) (-(((x) >> 12) & 1))
-#define RV_X(X, s, mask)  (((X) >> (s)) & (mask))
-#define RVC_X(X, s, mask) RV_X(X, s, mask)
+#define INSN_MATCH_LB		0x3
+#define INSN_MASK_LB		0x707f
+#define INSN_MATCH_LH		0x1003
+#define INSN_MASK_LH		0x707f
+#define INSN_MATCH_LW		0x2003
+#define INSN_MASK_LW		0x707f
+#define INSN_MATCH_LD		0x3003
+#define INSN_MASK_LD		0x707f
+#define INSN_MATCH_LBU		0x4003
+#define INSN_MASK_LBU		0x707f
+#define INSN_MATCH_LHU		0x5003
+#define INSN_MASK_LHU		0x707f
+#define INSN_MATCH_LWU		0x6003
+#define INSN_MASK_LWU		0x707f
+#define INSN_MATCH_SB		0x23
+#define INSN_MASK_SB		0x707f
+#define INSN_MATCH_SH		0x1023
+#define INSN_MASK_SH		0x707f
+#define INSN_MATCH_SW		0x2023
+#define INSN_MASK_SW		0x707f
+#define INSN_MATCH_SD		0x3023
+#define INSN_MASK_SD		0x707f
+
+#define INSN_MATCH_C_LD		0x6000
+#define INSN_MASK_C_LD		0xe003
+#define INSN_MATCH_C_SD		0xe000
+#define INSN_MASK_C_SD		0xe003
+#define INSN_MATCH_C_LW		0x4000
+#define INSN_MASK_C_LW		0xe003
+#define INSN_MATCH_C_SW		0xc000
+#define INSN_MASK_C_SW		0xe003
+#define INSN_MATCH_C_LDSP	0x6002
+#define INSN_MASK_C_LDSP	0xe003
+#define INSN_MATCH_C_SDSP	0xe002
+#define INSN_MASK_C_SDSP	0xe003
+#define INSN_MATCH_C_LWSP	0x4002
+#define INSN_MASK_C_LWSP	0xe003
+#define INSN_MATCH_C_SWSP	0xc002
+#define INSN_MASK_C_SWSP	0xe003
+
+#define INSN_OPCODE_MASK	0x007c
+#define INSN_OPCODE_SHIFT	2
+#define INSN_OPCODE_SYSTEM	28
+
+#define INSN_MASK_WFI		0xffffffff
+#define INSN_MATCH_WFI		0x10500073
+
+#define INSN_MASK_WRS		0xffffffff
+#define INSN_MATCH_WRS		0x00d00073
+
+#define INSN_MATCH_CSRRW	0x1073
+#define INSN_MASK_CSRRW		0x707f
+#define INSN_MATCH_CSRRS	0x2073
+#define INSN_MASK_CSRRS		0x707f
+#define INSN_MATCH_CSRRC	0x3073
+#define INSN_MASK_CSRRC		0x707f
+#define INSN_MATCH_CSRRWI	0x5073
+#define INSN_MASK_CSRRWI	0x707f
+#define INSN_MATCH_CSRRSI	0x6073
+#define INSN_MASK_CSRRSI	0x707f
+#define INSN_MATCH_CSRRCI	0x7073
+#define INSN_MASK_CSRRCI	0x707f
+
+#define INSN_MATCH_FLW		0x2007
+#define INSN_MASK_FLW		0x707f
+#define INSN_MATCH_FLD		0x3007
+#define INSN_MASK_FLD		0x707f
+#define INSN_MATCH_FLQ		0x4007
+#define INSN_MASK_FLQ		0x707f
+#define INSN_MATCH_FSW		0x2027
+#define INSN_MASK_FSW		0x707f
+#define INSN_MATCH_FSD		0x3027
+#define INSN_MASK_FSD		0x707f
+#define INSN_MATCH_FSQ		0x4027
+#define INSN_MASK_FSQ		0x707f
+
+#define INSN_MATCH_C_FLD	0x2000
+#define INSN_MASK_C_FLD		0xe003
+#define INSN_MATCH_C_FLW	0x6000
+#define INSN_MASK_C_FLW		0xe003
+#define INSN_MATCH_C_FSD	0xa000
+#define INSN_MASK_C_FSD		0xe003
+#define INSN_MATCH_C_FSW	0xe000
+#define INSN_MASK_C_FSW		0xe003
+#define INSN_MATCH_C_FLDSP	0x2002
+#define INSN_MASK_C_FLDSP	0xe003
+#define INSN_MATCH_C_FSDSP	0xa002
+#define INSN_MASK_C_FSDSP	0xe003
+#define INSN_MATCH_C_FLWSP	0x6002
+#define INSN_MASK_C_FLWSP	0xe003
+#define INSN_MATCH_C_FSWSP	0xe002
+#define INSN_MASK_C_FSWSP	0xe003
+
+#define INSN_MATCH_C_LHU		0x8400
+#define INSN_MASK_C_LHU			0xfc43
+#define INSN_MATCH_C_LH			0x8440
+#define INSN_MASK_C_LH			0xfc43
+#define INSN_MATCH_C_SH			0x8c00
+#define INSN_MASK_C_SH			0xfc43
+
+#define INSN_16BIT_MASK		0x3
+#define INSN_IS_16BIT(insn)	(((insn) & INSN_16BIT_MASK) != INSN_16BIT_MASK)
+#define INSN_LEN(insn)		(INSN_IS_16BIT(insn) ? 2 : 4)
+
+#define SHIFT_RIGHT(x, y)		\
+	((y) < 0 ? ((x) << -(y)) : ((x) >> (y)))
+
+#define REG_MASK			\
+	((1 << (5 + LOG_REGBYTES)) - (1 << LOG_REGBYTES))
+
+#define REG_OFFSET(insn, pos)		\
+	(SHIFT_RIGHT((insn), (pos) - LOG_REGBYTES) & REG_MASK)
+
+#define REG_PTR(insn, pos, regs)	\
+	((ulong *)((ulong)(regs) + REG_OFFSET(insn, pos)))
+
+#define GET_RS1(insn, regs)	(*REG_PTR(insn, SH_RS1, regs))
+#define GET_RS2(insn, regs)	(*REG_PTR(insn, SH_RS2, regs))
+#define GET_RS1S(insn, regs)	(*REG_PTR(RVC_RS1S(insn), 0, regs))
+#define GET_RS2S(insn, regs)	(*REG_PTR(RVC_RS2S(insn), 0, regs))
+#define GET_RS2C(insn, regs)	(*REG_PTR(insn, SH_RS2C, regs))
+#define GET_SP(regs)		(*REG_PTR(2, 0, regs))
+#define SET_RD(insn, regs, val)	(*REG_PTR(insn, SH_RD, regs) = (val))
+#define IMM_I(insn)		((s32)(insn) >> 20)
+#define IMM_S(insn)		(((s32)(insn) >> 25 << 5) | \
+				 (s32)(((insn) >> 7) & 0x1f))
+
+#define SH_RD			7
+#define SH_RS1			15
+#define SH_RS2			20
+#define SH_RS2C			2
+#define MASK_RX			0x1f
+
+#if defined(CONFIG_64BIT)
+#define LOG_REGBYTES		3
+#else
+#define LOG_REGBYTES		2
+#endif
+
+#define MASK_FUNCT3		0x7000
+
+#define GET_FUNCT3(insn)	(((insn) >> 12) & 7)
+
+#define RV_IMM_SIGN(x)		(-(((x) >> 31) & 1))
+#define RVC_IMM_SIGN(x)		(-(((x) >> 12) & 1))
+#define RV_X_MASK(X, s, mask)	(((X) >> (s)) & (mask))
+#define RV_X(X, s, n)		RV_X_MASK(X, s, ((1 << (n)) - 1))
+#define RVC_LW_IMM(x)		((RV_X(x, 6, 1) << 2) | \
+				 (RV_X(x, 10, 3) << 3) | \
+				 (RV_X(x, 5, 1) << 6))
+#define RVC_LD_IMM(x)		((RV_X(x, 10, 3) << 3) | \
+				 (RV_X(x, 5, 2) << 6))
+#define RVC_LWSP_IMM(x)		((RV_X(x, 4, 3) << 2) | \
+				 (RV_X(x, 12, 1) << 5) | \
+				 (RV_X(x, 2, 2) << 6))
+#define RVC_LDSP_IMM(x)		((RV_X(x, 5, 2) << 3) | \
+				 (RV_X(x, 12, 1) << 5) | \
+				 (RV_X(x, 2, 3) << 6))
+#define RVC_SWSP_IMM(x)		((RV_X(x, 9, 4) << 2) | \
+				 (RV_X(x, 7, 2) << 6))
+#define RVC_SDSP_IMM(x)		((RV_X(x, 10, 3) << 3) | \
+				 (RV_X(x, 7, 3) << 6))
+#define RVC_RS1S(insn)		(8 + RV_X(insn, SH_RD, 3))
+#define RVC_RS2S(insn)		(8 + RV_X(insn, SH_RS2C, 3))
+#define RVC_RS2(insn)		RV_X(insn, SH_RS2C, 5)
+#define RVC_X(X, s, mask)	RV_X_MASK(X, s, mask)
+
+#define RV_EXTRACT_FUNCT3(x) \
+	({typeof(x) x_ = (x); \
+	(RV_X_MASK(x_, RV_INSN_FUNCT3_OPOFF, \
+		   RV_INSN_FUNCT3_MASK >> RV_INSN_FUNCT3_OPOFF)); })
 
 #define RV_EXTRACT_RS1_REG(x) \
 	({typeof(x) x_ = (x); \
-	(RV_X(x_, RVG_RS1_OPOFF, RVG_RS1_MASK)); })
+	(RV_X_MASK(x_, RVG_RS1_OPOFF, RVG_RS1_MASK)); })
+
+#define RV_EXTRACT_RS2_REG(x) \
+	({typeof(x) x_ = (x); \
+	(RV_X_MASK(x_, RVG_RS2_OPOFF, RVG_RS2_MASK)); })
 
 #define RV_EXTRACT_RD_REG(x) \
 	({typeof(x) x_ = (x); \
-	(RV_X(x_, RVG_RD_OPOFF, RVG_RD_MASK)); })
+	(RV_X_MASK(x_, RVG_RD_OPOFF, RVG_RD_MASK)); })
 
 #define RV_EXTRACT_UTYPE_IMM(x) \
 	({typeof(x) x_ = (x); \
-	(RV_X(x_, RV_U_IMM_31_12_OPOFF, RV_U_IMM_31_12_MASK)); })
+	(RV_X_MASK(x_, RV_U_IMM_31_12_OPOFF, RV_U_IMM_31_12_MASK)); })
 
 #define RV_EXTRACT_JTYPE_IMM(x) \
 	({typeof(x) x_ = (x); \
-	(RV_X(x_, RV_J_IMM_10_1_OPOFF, RV_J_IMM_10_1_MASK) << RV_J_IMM_10_1_OFF) | \
-	(RV_X(x_, RV_J_IMM_11_OPOFF, RV_J_IMM_11_MASK) << RV_J_IMM_11_OFF) | \
-	(RV_X(x_, RV_J_IMM_19_12_OPOFF, RV_J_IMM_19_12_MASK) << RV_J_IMM_19_12_OFF) | \
+	(RV_X_MASK(x_, RV_J_IMM_10_1_OPOFF, RV_J_IMM_10_1_MASK) << RV_J_IMM_10_1_OFF) | \
+	(RV_X_MASK(x_, RV_J_IMM_11_OPOFF, RV_J_IMM_11_MASK) << RV_J_IMM_11_OFF) | \
+	(RV_X_MASK(x_, RV_J_IMM_19_12_OPOFF, RV_J_IMM_19_12_MASK) << RV_J_IMM_19_12_OFF) | \
 	(RV_IMM_SIGN(x_) << RV_J_IMM_SIGN_OFF); })
 
 #define RV_EXTRACT_ITYPE_IMM(x) \
 	({typeof(x) x_ = (x); \
-	(RV_X(x_, RV_I_IMM_11_0_OPOFF, RV_I_IMM_11_0_MASK)) | \
+	(RV_X_MASK(x_, RV_I_IMM_11_0_OPOFF, RV_I_IMM_11_0_MASK)) | \
 	(RV_IMM_SIGN(x_) << RV_I_IMM_SIGN_OFF); })
 
 #define RV_EXTRACT_BTYPE_IMM(x) \
 	({typeof(x) x_ = (x); \
-	(RV_X(x_, RV_B_IMM_4_1_OPOFF, RV_B_IMM_4_1_MASK) << RV_B_IMM_4_1_OFF) | \
-	(RV_X(x_, RV_B_IMM_10_5_OPOFF, RV_B_IMM_10_5_MASK) << RV_B_IMM_10_5_OFF) | \
-	(RV_X(x_, RV_B_IMM_11_OPOFF, RV_B_IMM_11_MASK) << RV_B_IMM_11_OFF) | \
+	(RV_X_MASK(x_, RV_B_IMM_4_1_OPOFF, RV_B_IMM_4_1_MASK) << RV_B_IMM_4_1_OFF) | \
+	(RV_X_MASK(x_, RV_B_IMM_10_5_OPOFF, RV_B_IMM_10_5_MASK) << RV_B_IMM_10_5_OFF) | \
+	(RV_X_MASK(x_, RV_B_IMM_11_OPOFF, RV_B_IMM_11_MASK) << RV_B_IMM_11_OFF) | \
 	(RV_IMM_SIGN(x_) << RV_B_IMM_SIGN_OFF); })
 
 #define RVC_EXTRACT_C2_RS1_REG(x) \
 	({typeof(x) x_ = (x); \
-	(RV_X(x_, RVC_C2_RS1_OPOFF, RVC_C2_RS1_MASK)); })
+	(RV_X_MASK(x_, RVC_C2_RS1_OPOFF, RVC_C2_RS1_MASK)); })
 
 #define RVC_EXTRACT_JTYPE_IMM(x) \
 	({typeof(x) x_ = (x); \
@@ -346,13 +518,13 @@ static __always_inline bool riscv_insn_is_c_jalr(u32 code)
 	(RVC_IMM_SIGN(x_) << RVC_B_IMM_SIGN_OFF); })
 
 #define RVG_EXTRACT_SYSTEM_CSR(x) \
-	({typeof(x) x_ = (x); RV_X(x_, RVG_SYSTEM_CSR_OFF, RVG_SYSTEM_CSR_MASK); })
+	({typeof(x) x_ = (x); RV_X_MASK(x_, RVG_SYSTEM_CSR_OFF, RVG_SYSTEM_CSR_MASK); })
 
 #define RVFDQ_EXTRACT_FL_FS_WIDTH(x) \
-	({typeof(x) x_ = (x); RV_X(x_, RVFDQ_FL_FS_WIDTH_OFF, \
+	({typeof(x) x_ = (x); RV_X_MASK(x_, RVFDQ_FL_FS_WIDTH_OFF, \
 				   RVFDQ_FL_FS_WIDTH_MASK); })
 
-#define RVV_EXRACT_VL_VS_WIDTH(x) RVFDQ_EXTRACT_FL_FS_WIDTH(x)
+#define RVV_EXTRACT_VL_VS_WIDTH(x) RVFDQ_EXTRACT_FL_FS_WIDTH(x)
 
 /*
  * Get the immediate from a J-type instruction.
@@ -375,10 +547,10 @@ static inline void riscv_insn_insert_jtype_imm(u32 *insn, s32 imm)
 {
 	/* drop the old IMMs, all jal IMM bits sit at 31:12 */
 	*insn &= ~GENMASK(31, 12);
-	*insn |= (RV_X(imm, RV_J_IMM_10_1_OFF, RV_J_IMM_10_1_MASK) << RV_J_IMM_10_1_OPOFF) |
-		 (RV_X(imm, RV_J_IMM_11_OFF, RV_J_IMM_11_MASK) << RV_J_IMM_11_OPOFF) |
-		 (RV_X(imm, RV_J_IMM_19_12_OFF, RV_J_IMM_19_12_MASK) << RV_J_IMM_19_12_OPOFF) |
-		 (RV_X(imm, RV_J_IMM_SIGN_OFF, 1) << RV_J_IMM_SIGN_OPOFF);
+	*insn |= (RV_X_MASK(imm, RV_J_IMM_10_1_OFF, RV_J_IMM_10_1_MASK) << RV_J_IMM_10_1_OPOFF) |
+		 (RV_X_MASK(imm, RV_J_IMM_11_OFF, RV_J_IMM_11_MASK) << RV_J_IMM_11_OPOFF) |
+		 (RV_X_MASK(imm, RV_J_IMM_19_12_OFF, RV_J_IMM_19_12_MASK) << RV_J_IMM_19_12_OPOFF) |
+		 (RV_X_MASK(imm, RV_J_IMM_SIGN_OFF, 1) << RV_J_IMM_SIGN_OPOFF);
 }
 
 /*
diff --git a/arch/riscv/include/asm/io.h b/arch/riscv/include/asm/io.h
index a0e51840b9db..09bb5f57a9d3 100644
--- a/arch/riscv/include/asm/io.h
+++ b/arch/riscv/include/asm/io.h
@@ -28,6 +28,10 @@
 #ifdef CONFIG_MMU
 #define IO_SPACE_LIMIT		(PCI_IO_SIZE - 1)
 #define PCI_IOBASE		((void __iomem *)PCI_IO_START)
+
+#define ioremap_wc(addr, size)	\
+	ioremap_prot((addr), (size), __pgprot(_PAGE_KERNEL_NC))
+
 #endif /* CONFIG_MMU */
 
 /*
diff --git a/arch/riscv/include/asm/jump_label.h b/arch/riscv/include/asm/jump_label.h
index 87a71cc6d146..3ab5f2e3212b 100644
--- a/arch/riscv/include/asm/jump_label.h
+++ b/arch/riscv/include/asm/jump_label.h
@@ -7,7 +7,7 @@
 #ifndef __ASM_JUMP_LABEL_H
 #define __ASM_JUMP_LABEL_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/types.h>
 #include <asm/asm.h>
@@ -66,5 +66,5 @@ label:
 	return true;
 }
 
-#endif  /* __ASSEMBLY__ */
+#endif  /* __ASSEMBLER__ */
 #endif	/* __ASM_JUMP_LABEL_H */
diff --git a/arch/riscv/include/asm/kasan.h b/arch/riscv/include/asm/kasan.h
index e6a0071bdb56..60af6691f903 100644
--- a/arch/riscv/include/asm/kasan.h
+++ b/arch/riscv/include/asm/kasan.h
@@ -4,7 +4,7 @@
 #ifndef __ASM_KASAN_H
 #define __ASM_KASAN_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 /*
  * The following comment was copied from arm64:
diff --git a/arch/riscv/include/asm/kgdb.h b/arch/riscv/include/asm/kgdb.h
index cc11c4544cff..7559d728c5ff 100644
--- a/arch/riscv/include/asm/kgdb.h
+++ b/arch/riscv/include/asm/kgdb.h
@@ -17,12 +17,12 @@
 #define BREAK_INSTR_SIZE	4
 #endif
 
-#ifndef	__ASSEMBLY__
+#ifndef	__ASSEMBLER__
 
 void arch_kgdb_breakpoint(void);
 extern unsigned long kgdb_compiled_break;
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #define DBG_REG_ZERO "zero"
 #define DBG_REG_RA "ra"
diff --git a/arch/riscv/include/asm/mmu.h b/arch/riscv/include/asm/mmu.h
index 1cc90465d75b..cf8e6eac77d5 100644
--- a/arch/riscv/include/asm/mmu.h
+++ b/arch/riscv/include/asm/mmu.h
@@ -7,7 +7,7 @@
 #ifndef _ASM_RISCV_MMU_H
 #define _ASM_RISCV_MMU_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 typedef struct {
 #ifndef CONFIG_MMU
@@ -40,6 +40,6 @@ typedef struct {
 
 void __meminit create_pgd_mapping(pgd_t *pgdp, uintptr_t va, phys_addr_t pa, phys_addr_t sz,
 				  pgprot_t prot);
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_RISCV_MMU_H */
diff --git a/arch/riscv/include/asm/page.h b/arch/riscv/include/asm/page.h
index 572a141ddecd..ffe213ad65a4 100644
--- a/arch/riscv/include/asm/page.h
+++ b/arch/riscv/include/asm/page.h
@@ -41,7 +41,7 @@
 #define PAGE_OFFSET		((unsigned long)phys_ram_base)
 #endif /* CONFIG_MMU */
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #ifdef CONFIG_RISCV_ISA_ZICBOZ
 void clear_page(void *page);
@@ -199,7 +199,7 @@ static __always_inline void *pfn_to_kaddr(unsigned long pfn)
 	return __va(pfn << PAGE_SHIFT);
 }
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #define virt_addr_valid(vaddr)	({						\
 	unsigned long _addr = (unsigned long)vaddr;				\
diff --git a/arch/riscv/include/asm/pgtable.h b/arch/riscv/include/asm/pgtable.h
index 91697fbf1f90..29e994a9afb6 100644
--- a/arch/riscv/include/asm/pgtable.h
+++ b/arch/riscv/include/asm/pgtable.h
@@ -111,7 +111,7 @@
 
 #endif
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/page.h>
 #include <asm/tlbflush.h>
@@ -203,6 +203,7 @@ extern struct pt_alloc_ops pt_ops __meminitdata;
 
 #define PAGE_TABLE		__pgprot(_PAGE_TABLE)
 
+#define _PAGE_KERNEL_NC ((_PAGE_KERNEL & ~_PAGE_MTMASK) | _PAGE_NOCACHE)
 #define _PAGE_IOREMAP	((_PAGE_KERNEL & ~_PAGE_MTMASK) | _PAGE_IO)
 #define PAGE_KERNEL_IO		__pgprot(_PAGE_IOREMAP)
 
@@ -942,6 +943,23 @@ static inline int pudp_test_and_clear_young(struct vm_area_struct *vma,
 	return ptep_test_and_clear_young(vma, address, (pte_t *)pudp);
 }
 
+#define __HAVE_ARCH_PUDP_HUGE_GET_AND_CLEAR
+static inline pud_t pudp_huge_get_and_clear(struct mm_struct *mm,
+					    unsigned long address,  pud_t *pudp)
+{
+#ifdef CONFIG_SMP
+	pud_t pud = __pud(xchg(&pudp->pud, 0));
+#else
+	pud_t pud = *pudp;
+
+	pud_clear(pudp);
+#endif
+
+	page_table_check_pud_clear(mm, pud);
+
+	return pud;
+}
+
 static inline int pud_young(pud_t pud)
 {
 	return pte_young(pud_pte(pud));
@@ -1118,6 +1136,6 @@ extern unsigned long empty_zero_page[PAGE_SIZE / sizeof(unsigned long)];
 	WARN_ON_ONCE(pgd_present(*pgdp) && !pgd_same(*pgdp, pgd)); \
 	set_pgd(pgdp, pgd); \
 })
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* _ASM_RISCV_PGTABLE_H */
diff --git a/arch/riscv/include/asm/processor.h b/arch/riscv/include/asm/processor.h
index 24d3af4d3807..da5426122d28 100644
--- a/arch/riscv/include/asm/processor.h
+++ b/arch/riscv/include/asm/processor.h
@@ -54,7 +54,7 @@
 #define TASK_UNMAPPED_BASE	PAGE_ALIGN(TASK_SIZE / 3)
 #endif
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 struct task_struct;
 struct pt_regs;
@@ -215,6 +215,6 @@ long get_tagged_addr_ctrl(struct task_struct *task);
 #define GET_TAGGED_ADDR_CTRL()		get_tagged_addr_ctrl(current)
 #endif
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_RISCV_PROCESSOR_H */
diff --git a/arch/riscv/include/asm/ptrace.h b/arch/riscv/include/asm/ptrace.h
index a7dc0e330757..addc8188152f 100644
--- a/arch/riscv/include/asm/ptrace.h
+++ b/arch/riscv/include/asm/ptrace.h
@@ -10,7 +10,7 @@
 #include <asm/csr.h>
 #include <linux/compiler.h>
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 struct pt_regs {
 	unsigned long epc;
@@ -180,6 +180,6 @@ static __always_inline bool regs_irqs_disabled(struct pt_regs *regs)
 	return !(regs->status & SR_PIE);
 }
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_RISCV_PTRACE_H */
diff --git a/arch/riscv/include/asm/scs.h b/arch/riscv/include/asm/scs.h
index 0e45db78b24b..ab7714aa93bd 100644
--- a/arch/riscv/include/asm/scs.h
+++ b/arch/riscv/include/asm/scs.h
@@ -2,7 +2,7 @@
 #ifndef _ASM_SCS_H
 #define _ASM_SCS_H
 
-#ifdef __ASSEMBLY__
+#ifdef __ASSEMBLER__
 #include <asm/asm-offsets.h>
 
 #ifdef CONFIG_SHADOW_CALL_STACK
@@ -49,6 +49,6 @@ _skip_scs:
 .endm
 
 #endif /* CONFIG_SHADOW_CALL_STACK */
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _ASM_SCS_H */
diff --git a/arch/riscv/include/asm/set_memory.h b/arch/riscv/include/asm/set_memory.h
index ea263d3683ef..87389e93325a 100644
--- a/arch/riscv/include/asm/set_memory.h
+++ b/arch/riscv/include/asm/set_memory.h
@@ -6,7 +6,7 @@
 #ifndef _ASM_RISCV_SET_MEMORY_H
 #define _ASM_RISCV_SET_MEMORY_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 /*
  * Functions to change memory attributes.
  */
@@ -45,7 +45,7 @@ int set_direct_map_default_noflush(struct page *page);
 int set_direct_map_valid_noflush(struct page *page, unsigned nr, bool valid);
 bool kernel_page_present(struct page *page);
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #if defined(CONFIG_STRICT_KERNEL_RWX) || defined(CONFIG_XIP_KERNEL)
 #ifdef CONFIG_64BIT
diff --git a/arch/riscv/include/asm/swab.h b/arch/riscv/include/asm/swab.h
new file mode 100644
index 000000000000..c1da22aa1326
--- /dev/null
+++ b/arch/riscv/include/asm/swab.h
@@ -0,0 +1,87 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+#ifndef _ASM_RISCV_SWAB_H
+#define _ASM_RISCV_SWAB_H
+
+#include <linux/types.h>
+#include <linux/compiler.h>
+#include <asm/cpufeature-macros.h>
+#include <asm/hwcap.h>
+#include <asm-generic/swab.h>
+
+#if defined(CONFIG_TOOLCHAIN_HAS_ZBB) && defined(CONFIG_RISCV_ISA_ZBB) && !defined(NO_ALTERNATIVE)
+
+// Duplicated from include/uapi/linux/swab.h
+#define ___constant_swab16(x) ((__u16)(				\
+	(((__u16)(x) & (__u16)0x00ffU) << 8) |			\
+	(((__u16)(x) & (__u16)0xff00U) >> 8)))
+
+#define ___constant_swab32(x) ((__u32)(				\
+	(((__u32)(x) & (__u32)0x000000ffUL) << 24) |		\
+	(((__u32)(x) & (__u32)0x0000ff00UL) <<  8) |		\
+	(((__u32)(x) & (__u32)0x00ff0000UL) >>  8) |		\
+	(((__u32)(x) & (__u32)0xff000000UL) >> 24)))
+
+#define ___constant_swab64(x) ((__u64)(				\
+	(((__u64)(x) & (__u64)0x00000000000000ffULL) << 56) |	\
+	(((__u64)(x) & (__u64)0x000000000000ff00ULL) << 40) |	\
+	(((__u64)(x) & (__u64)0x0000000000ff0000ULL) << 24) |	\
+	(((__u64)(x) & (__u64)0x00000000ff000000ULL) <<  8) |	\
+	(((__u64)(x) & (__u64)0x000000ff00000000ULL) >>  8) |	\
+	(((__u64)(x) & (__u64)0x0000ff0000000000ULL) >> 24) |	\
+	(((__u64)(x) & (__u64)0x00ff000000000000ULL) >> 40) |	\
+	(((__u64)(x) & (__u64)0xff00000000000000ULL) >> 56)))
+
+#define ARCH_SWAB(size, value)						\
+({									\
+	unsigned long x = value;					\
+									\
+	if (riscv_has_extension_likely(RISCV_ISA_EXT_ZBB)) {            \
+		asm volatile (".option push\n"				\
+			      ".option arch,+zbb\n"			\
+			      "rev8 %0, %1\n"				\
+			      ".option pop\n"				\
+			      : "=r" (x) : "r" (x));			\
+		x = x >> (BITS_PER_LONG - size);			\
+	} else {                                                        \
+		x = ___constant_swab##size(value);                      \
+	}								\
+	x;								\
+})
+
+static __always_inline __u16 __arch_swab16(__u16 value)
+{
+	return ARCH_SWAB(16, value);
+}
+
+static __always_inline __u32 __arch_swab32(__u32 value)
+{
+	return ARCH_SWAB(32, value);
+}
+
+#ifdef CONFIG_64BIT
+static __always_inline __u64 __arch_swab64(__u64 value)
+{
+	return ARCH_SWAB(64, value);
+}
+#else
+static __always_inline __u64 __arch_swab64(__u64 value)
+{
+	__u32 h = value >> 32;
+	__u32 l = value & ((1ULL << 32) - 1);
+
+	return ((__u64)(__arch_swab32(l)) << 32) | ((__u64)(__arch_swab32(h)));
+}
+#endif
+
+#define __arch_swab64 __arch_swab64
+#define __arch_swab32 __arch_swab32
+#define __arch_swab16 __arch_swab16
+
+#undef ___constant_swab16
+#undef ___constant_swab32
+#undef ___constant_swab64
+
+#undef ARCH_SWAB
+
+#endif /* defined(CONFIG_TOOLCHAIN_HAS_ZBB) && defined(CONFIG_RISCV_ISA_ZBB) && !defined(NO_ALTERNATIVE) */
+#endif /* _ASM_RISCV_SWAB_H */
diff --git a/arch/riscv/include/asm/thread_info.h b/arch/riscv/include/asm/thread_info.h
index f5916a70879a..836d80dd2921 100644
--- a/arch/riscv/include/asm/thread_info.h
+++ b/arch/riscv/include/asm/thread_info.h
@@ -37,7 +37,7 @@
 
 #define IRQ_STACK_SIZE		THREAD_SIZE
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/processor.h>
 #include <asm/csr.h>
@@ -98,7 +98,7 @@ struct thread_info {
 void arch_release_task_struct(struct task_struct *tsk);
 int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src);
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 /*
  * thread information flags
@@ -107,23 +107,18 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src);
  * - pending work-to-be-done flags are in lowest half-word
  * - other flags in upper half-word(s)
  */
-#define TIF_NEED_RESCHED	0	/* rescheduling necessary */
-#define TIF_NEED_RESCHED_LAZY	1       /* Lazy rescheduling needed */
-#define TIF_NOTIFY_RESUME	2	/* callback before returning to user */
-#define TIF_SIGPENDING		3	/* signal pending */
-#define TIF_RESTORE_SIGMASK	4	/* restore signal mask in do_signal() */
-#define TIF_MEMDIE		5	/* is terminating due to OOM killer */
-#define TIF_NOTIFY_SIGNAL	9	/* signal notifications exist */
-#define TIF_UPROBE		10	/* uprobe breakpoint or singlestep */
-#define TIF_32BIT		11	/* compat-mode 32bit process */
-#define TIF_RISCV_V_DEFER_RESTORE	12 /* restore Vector before returing to user */
-
-#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
-#define _TIF_NEED_RESCHED_LAZY	(1 << TIF_NEED_RESCHED_LAZY)
-#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
-#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
-#define _TIF_NOTIFY_SIGNAL	(1 << TIF_NOTIFY_SIGNAL)
-#define _TIF_UPROBE		(1 << TIF_UPROBE)
-#define _TIF_RISCV_V_DEFER_RESTORE	(1 << TIF_RISCV_V_DEFER_RESTORE)
+
+/*
+ * Tell the generic TIF infrastructure which bits riscv supports
+ */
+#define HAVE_TIF_NEED_RESCHED_LAZY
+#define HAVE_TIF_RESTORE_SIGMASK
+
+#include <asm-generic/thread_info_tif.h>
+
+#define TIF_32BIT			16	/* compat-mode 32bit process */
+#define TIF_RISCV_V_DEFER_RESTORE	17	/* restore Vector before returing to user */
+
+#define _TIF_RISCV_V_DEFER_RESTORE	BIT(TIF_RISCV_V_DEFER_RESTORE)
 
 #endif /* _ASM_RISCV_THREAD_INFO_H */
diff --git a/arch/riscv/include/asm/uaccess.h b/arch/riscv/include/asm/uaccess.h
index b88a6218b7f2..f5f4f7f85543 100644
--- a/arch/riscv/include/asm/uaccess.h
+++ b/arch/riscv/include/asm/uaccess.h
@@ -209,7 +209,7 @@ do {									\
 		err = 0;						\
 		break;							\
 __gu_failed:								\
-		x = 0;							\
+		x = (__typeof__(x))0;					\
 		err = -EFAULT;						\
 } while (0)
 
@@ -311,7 +311,7 @@ do {								\
 do {								\
 	if (!IS_ENABLED(CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS) &&	\
 	    !IS_ALIGNED((uintptr_t)__gu_ptr, sizeof(*__gu_ptr))) {	\
-		__inttype(x) ___val = (__inttype(x))x;			\
+		__typeof__(*(__gu_ptr)) ___val = (x);		\
 		if (__asm_copy_to_user_sum_enabled(__gu_ptr, &(___val), sizeof(*__gu_ptr))) \
 			goto label;				\
 		break;						\
@@ -438,10 +438,10 @@ unsigned long __must_check clear_user(void __user *to, unsigned long n)
 }
 
 #define __get_kernel_nofault(dst, src, type, err_label)			\
-	__get_user_nocheck(*((type *)(dst)), (type *)(src), err_label)
+	__get_user_nocheck(*((type *)(dst)), (__force __user type *)(src), err_label)
 
 #define __put_kernel_nofault(dst, src, type, err_label)			\
-	__put_user_nocheck(*((type *)(src)), (type *)(dst), err_label)
+	__put_user_nocheck(*((type *)(src)), (__force __user type *)(dst), err_label)
 
 static __must_check __always_inline bool user_access_begin(const void __user *ptr, size_t len)
 {
diff --git a/arch/riscv/include/asm/vdso.h b/arch/riscv/include/asm/vdso.h
index c130d8100232..f80357fe24d1 100644
--- a/arch/riscv/include/asm/vdso.h
+++ b/arch/riscv/include/asm/vdso.h
@@ -16,7 +16,7 @@
 
 #define __VDSO_PAGES    4
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 #include <generated/vdso-offsets.h>
 
 #define VDSO_SYMBOL(base, name)							\
@@ -34,7 +34,7 @@ extern char compat_vdso_start[], compat_vdso_end[];
 
 extern char vdso_start[], vdso_end[];
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* CONFIG_MMU */
 
diff --git a/arch/riscv/include/asm/vdso/getrandom.h b/arch/riscv/include/asm/vdso/getrandom.h
index c6d66895c1f5..ab4aef955099 100644
--- a/arch/riscv/include/asm/vdso/getrandom.h
+++ b/arch/riscv/include/asm/vdso/getrandom.h
@@ -5,7 +5,7 @@
 #ifndef __ASM_VDSO_GETRANDOM_H
 #define __ASM_VDSO_GETRANDOM_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/unistd.h>
 
@@ -25,6 +25,6 @@ static __always_inline ssize_t getrandom_syscall(void *_buffer, size_t _len, uns
 	return ret;
 }
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* __ASM_VDSO_GETRANDOM_H */
diff --git a/arch/riscv/include/asm/vdso/gettimeofday.h b/arch/riscv/include/asm/vdso/gettimeofday.h
index 29164f84f93c..9ec08fa04d35 100644
--- a/arch/riscv/include/asm/vdso/gettimeofday.h
+++ b/arch/riscv/include/asm/vdso/gettimeofday.h
@@ -2,7 +2,7 @@
 #ifndef __ASM_VDSO_GETTIMEOFDAY_H
 #define __ASM_VDSO_GETTIMEOFDAY_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/barrier.h>
 #include <asm/unistd.h>
@@ -79,6 +79,6 @@ static __always_inline u64 __arch_get_hw_counter(s32 clock_mode,
 	return csr_read(CSR_TIME);
 }
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* __ASM_VDSO_GETTIMEOFDAY_H */
diff --git a/arch/riscv/include/asm/vdso/processor.h b/arch/riscv/include/asm/vdso/processor.h
index 8f383f05a290..c42f95dc8811 100644
--- a/arch/riscv/include/asm/vdso/processor.h
+++ b/arch/riscv/include/asm/vdso/processor.h
@@ -2,9 +2,10 @@
 #ifndef __ASM_VDSO_PROCESSOR_H
 #define __ASM_VDSO_PROCESSOR_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <asm/barrier.h>
+#include <asm/errata_list.h>
 #include <asm/insn-def.h>
 
 static inline void cpu_relax(void)
@@ -19,10 +20,10 @@ static inline void cpu_relax(void)
 	 * Reduce instruction retirement.
 	 * This assumes the PC changes.
 	 */
-	__asm__ __volatile__ (RISCV_PAUSE);
+	ALT_RISCV_PAUSE();
 	barrier();
 }
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* __ASM_VDSO_PROCESSOR_H */
diff --git a/arch/riscv/include/asm/vdso/vsyscall.h b/arch/riscv/include/asm/vdso/vsyscall.h
index 1140b54b4bc8..558eb9dfda52 100644
--- a/arch/riscv/include/asm/vdso/vsyscall.h
+++ b/arch/riscv/include/asm/vdso/vsyscall.h
@@ -2,13 +2,13 @@
 #ifndef __ASM_VDSO_VSYSCALL_H
 #define __ASM_VDSO_VSYSCALL_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <vdso/datapage.h>
 
 /* The asm-generic header needs to be included after the definitions above */
 #include <asm-generic/vdso/vsyscall.h>
 
-#endif /* !__ASSEMBLY__ */
+#endif /* !__ASSEMBLER__ */
 
 #endif /* __ASM_VDSO_VSYSCALL_H */
diff --git a/arch/riscv/include/asm/vendor_extensions/mips.h b/arch/riscv/include/asm/vendor_extensions/mips.h
new file mode 100644
index 000000000000..ea8ca747d691
--- /dev/null
+++ b/arch/riscv/include/asm/vendor_extensions/mips.h
@@ -0,0 +1,37 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2025 MIPS.
+ */
+
+#ifndef _ASM_RISCV_VENDOR_EXTENSIONS_MIPS_H
+#define _ASM_RISCV_VENDOR_EXTENSIONS_MIPS_H
+
+#include <linux/types.h>
+
+#define RISCV_ISA_VENDOR_EXT_XMIPSEXECTL	0
+
+#ifndef __ASSEMBLER__
+struct riscv_isa_vendor_ext_data_list;
+extern struct riscv_isa_vendor_ext_data_list riscv_isa_vendor_ext_list_mips;
+#endif
+
+/* Extension specific instructions */
+
+/*
+ * All of the xmipsexectl extension instructions are
+ * ‘hint’ encodings of the SLLI instruction,
+ * with rd = 0, rs1 = 0 and imm = 1 for IHB, imm = 3 for EHB,
+ * and imm = 5 for PAUSE.
+ * MIPS.PAUSE is an alternative opcode which is implemented to have the
+ * same behavior as PAUSE on some MIPS RISCV cores.
+ * MIPS.EHB clears all execution hazards before allowing
+ * any subsequent instructions to execute.
+ * MIPS.IHB clears all instruction hazards before
+ * allowing any subsequent instructions to fetch.
+ */
+
+#define MIPS_PAUSE	".4byte 0x00501013\n\t"
+#define MIPS_EHB	".4byte 0x00301013\n\t"
+#define MIPS_IHB	".4byte 0x00101013\n\t"
+
+#endif // _ASM_RISCV_VENDOR_EXTENSIONS_MIPS_H
diff --git a/arch/riscv/include/asm/vendor_extensions/mips_hwprobe.h b/arch/riscv/include/asm/vendor_extensions/mips_hwprobe.h
new file mode 100644
index 000000000000..e63f664b6b17
--- /dev/null
+++ b/arch/riscv/include/asm/vendor_extensions/mips_hwprobe.h
@@ -0,0 +1,22 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2025 MIPS.
+ */
+
+#ifndef _ASM_RISCV_VENDOR_EXTENSIONS_MIPS_HWPROBE_H_
+#define _ASM_RISCV_VENDOR_EXTENSIONS_MIPS_HWPROBE_H_
+
+#include <linux/cpumask.h>
+#include <uapi/asm/hwprobe.h>
+
+#ifdef CONFIG_RISCV_ISA_VENDOR_EXT_MIPS
+void hwprobe_isa_vendor_ext_mips_0(struct riscv_hwprobe *pair, const struct cpumask *cpus);
+#else
+static inline void hwprobe_isa_vendor_ext_mips_0(struct riscv_hwprobe *pair,
+						 const struct cpumask *cpus)
+{
+	pair->value = 0;
+}
+#endif
+
+#endif // _ASM_RISCV_VENDOR_EXTENSIONS_MIPS_HWPROBE_H_
diff --git a/arch/riscv/include/asm/vendorid_list.h b/arch/riscv/include/asm/vendorid_list.h
index a5150cdf34d8..3b09874d7a6d 100644
--- a/arch/riscv/include/asm/vendorid_list.h
+++ b/arch/riscv/include/asm/vendorid_list.h
@@ -9,5 +9,6 @@
 #define MICROCHIP_VENDOR_ID	0x029
 #define SIFIVE_VENDOR_ID	0x489
 #define THEAD_VENDOR_ID		0x5b7
+#define MIPS_VENDOR_ID		0x722
 
 #endif
diff --git a/arch/riscv/include/uapi/asm/hwprobe.h b/arch/riscv/include/uapi/asm/hwprobe.h
index aaf6ad970499..5d30a4fae37a 100644
--- a/arch/riscv/include/uapi/asm/hwprobe.h
+++ b/arch/riscv/include/uapi/asm/hwprobe.h
@@ -106,6 +106,7 @@ struct riscv_hwprobe {
 #define RISCV_HWPROBE_KEY_VENDOR_EXT_THEAD_0	11
 #define RISCV_HWPROBE_KEY_ZICBOM_BLOCK_SIZE	12
 #define RISCV_HWPROBE_KEY_VENDOR_EXT_SIFIVE_0	13
+#define RISCV_HWPROBE_KEY_VENDOR_EXT_MIPS_0	14
 /* Increase RISCV_HWPROBE_MAX_KEY when adding items. */
 
 /* Flags */
diff --git a/arch/riscv/include/uapi/asm/kvm.h b/arch/riscv/include/uapi/asm/kvm.h
index ef27d4289da1..251099d860aa 100644
--- a/arch/riscv/include/uapi/asm/kvm.h
+++ b/arch/riscv/include/uapi/asm/kvm.h
@@ -9,7 +9,7 @@
 #ifndef __LINUX_KVM_RISCV_H
 #define __LINUX_KVM_RISCV_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/types.h>
 #include <asm/bitsperlong.h>
diff --git a/arch/riscv/include/uapi/asm/ptrace.h b/arch/riscv/include/uapi/asm/ptrace.h
index a38268b19c3d..beff8df80ac9 100644
--- a/arch/riscv/include/uapi/asm/ptrace.h
+++ b/arch/riscv/include/uapi/asm/ptrace.h
@@ -6,7 +6,7 @@
 #ifndef _UAPI_ASM_RISCV_PTRACE_H
 #define _UAPI_ASM_RISCV_PTRACE_H
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 #include <linux/types.h>
 
@@ -127,6 +127,6 @@ struct __riscv_v_regset_state {
  */
 #define RISCV_MAX_VLENB (8192)
 
-#endif /* __ASSEMBLY__ */
+#endif /* __ASSEMBLER__ */
 
 #endif /* _UAPI_ASM_RISCV_PTRACE_H */
diff --git a/arch/riscv/include/uapi/asm/sigcontext.h b/arch/riscv/include/uapi/asm/sigcontext.h
index cd4f175dc837..748dffc9ae19 100644
--- a/arch/riscv/include/uapi/asm/sigcontext.h
+++ b/arch/riscv/include/uapi/asm/sigcontext.h
@@ -15,7 +15,7 @@
 /* The size of END signal context header. */
 #define END_HDR_SIZE	0x0
 
-#ifndef __ASSEMBLY__
+#ifndef __ASSEMBLER__
 
 struct __sc_riscv_v_state {
 	struct __riscv_v_ext_state v_state;
@@ -35,6 +35,6 @@ struct sigcontext {
 	};
 };
 
-#endif /*!__ASSEMBLY__*/
+#endif /*!__ASSEMBLER__*/
 
 #endif /* _UAPI_ASM_RISCV_SIGCONTEXT_H */
diff --git a/arch/riscv/include/uapi/asm/vendor/mips.h b/arch/riscv/include/uapi/asm/vendor/mips.h
new file mode 100644
index 000000000000..e65ab268b265
--- /dev/null
+++ b/arch/riscv/include/uapi/asm/vendor/mips.h
@@ -0,0 +1,3 @@
+/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */
+
+#define RISCV_HWPROBE_VENDOR_EXT_XMIPSEXECTL	BIT(0)
diff --git a/arch/riscv/kernel/Makefile b/arch/riscv/kernel/Makefile
index c7b542573407..f60fce69b725 100644
--- a/arch/riscv/kernel/Makefile
+++ b/arch/riscv/kernel/Makefile
@@ -113,7 +113,7 @@ obj-$(CONFIG_VMCORE_INFO)	+= vmcore_info.o
 
 obj-$(CONFIG_JUMP_LABEL)	+= jump_label.o
 
-obj-$(CONFIG_CFI_CLANG)		+= cfi.o
+obj-$(CONFIG_CFI)		+= cfi.o
 
 obj-$(CONFIG_EFI)		+= efi.o
 obj-$(CONFIG_COMPAT)		+= compat_syscall_table.o
diff --git a/arch/riscv/kernel/acpi.c b/arch/riscv/kernel/acpi.c
index 3f6d5a6789e8..71698ee11621 100644
--- a/arch/riscv/kernel/acpi.c
+++ b/arch/riscv/kernel/acpi.c
@@ -14,6 +14,7 @@
  */
 
 #include <linux/acpi.h>
+#include <linux/efi-bgrt.h>
 #include <linux/efi.h>
 #include <linux/io.h>
 #include <linux/memblock.h>
@@ -160,6 +161,8 @@ done:
 			early_init_dt_scan_chosen_stdout();
 	} else {
 		acpi_parse_spcr(earlycon_acpi_spcr_enable, true);
+		if (IS_ENABLED(CONFIG_ACPI_BGRT))
+			acpi_table_parse(ACPI_SIG_BGRT, acpi_parse_bgrt);
 	}
 }
 
diff --git a/arch/riscv/kernel/alternative.c b/arch/riscv/kernel/alternative.c
index 7eb3cb1215c6..7642704c7f18 100644
--- a/arch/riscv/kernel/alternative.c
+++ b/arch/riscv/kernel/alternative.c
@@ -47,6 +47,11 @@ static void riscv_fill_cpu_mfr_info(struct cpu_manufacturer_info_t *cpu_mfr_info
 		cpu_mfr_info->patch_func = andes_errata_patch_func;
 		break;
 #endif
+#ifdef CONFIG_ERRATA_MIPS
+	case MIPS_VENDOR_ID:
+		cpu_mfr_info->patch_func = mips_errata_patch_func;
+		break;
+#endif
 #ifdef CONFIG_ERRATA_SIFIVE
 	case SIFIVE_VENDOR_ID:
 		cpu_mfr_info->patch_func = sifive_errata_patch_func;
diff --git a/arch/riscv/kernel/asm-offsets.c b/arch/riscv/kernel/asm-offsets.c
index 6e8c0d6feae9..7d42d3b8a32a 100644
--- a/arch/riscv/kernel/asm-offsets.c
+++ b/arch/riscv/kernel/asm-offsets.c
@@ -3,6 +3,7 @@
  * Copyright (C) 2012 Regents of the University of California
  * Copyright (C) 2017 SiFive
  */
+#define COMPILE_OFFSETS
 
 #include <linux/kbuild.h>
 #include <linux/mm.h>
diff --git a/arch/riscv/kernel/cpufeature.c b/arch/riscv/kernel/cpufeature.c
index 743d53415572..67b59699357d 100644
--- a/arch/riscv/kernel/cpufeature.c
+++ b/arch/riscv/kernel/cpufeature.c
@@ -474,10 +474,10 @@ const struct riscv_isa_ext_data riscv_isa_ext[] = {
 	__RISCV_ISA_EXT_DATA(zacas, RISCV_ISA_EXT_ZACAS),
 	__RISCV_ISA_EXT_DATA(zalrsc, RISCV_ISA_EXT_ZALRSC),
 	__RISCV_ISA_EXT_DATA(zawrs, RISCV_ISA_EXT_ZAWRS),
-	__RISCV_ISA_EXT_DATA(zfa, RISCV_ISA_EXT_ZFA),
+	__RISCV_ISA_EXT_DATA_VALIDATE(zfa, RISCV_ISA_EXT_ZFA, riscv_ext_f_depends),
 	__RISCV_ISA_EXT_DATA_VALIDATE(zfbfmin, RISCV_ISA_EXT_ZFBFMIN, riscv_ext_f_depends),
-	__RISCV_ISA_EXT_DATA(zfh, RISCV_ISA_EXT_ZFH),
-	__RISCV_ISA_EXT_DATA(zfhmin, RISCV_ISA_EXT_ZFHMIN),
+	__RISCV_ISA_EXT_DATA_VALIDATE(zfh, RISCV_ISA_EXT_ZFH, riscv_ext_f_depends),
+	__RISCV_ISA_EXT_DATA_VALIDATE(zfhmin, RISCV_ISA_EXT_ZFHMIN, riscv_ext_f_depends),
 	__RISCV_ISA_EXT_DATA(zca, RISCV_ISA_EXT_ZCA),
 	__RISCV_ISA_EXT_DATA_VALIDATE(zcb, RISCV_ISA_EXT_ZCB, riscv_ext_zca_depends),
 	__RISCV_ISA_EXT_DATA_VALIDATE(zcd, RISCV_ISA_EXT_ZCD, riscv_ext_zcd_validate),
diff --git a/arch/riscv/kernel/entry.S b/arch/riscv/kernel/entry.S
index 3a0ec6fd5956..d3d92a4becc7 100644
--- a/arch/riscv/kernel/entry.S
+++ b/arch/riscv/kernel/entry.S
@@ -7,6 +7,7 @@
 #include <linux/init.h>
 #include <linux/linkage.h>
 
+#include <asm/alternative-macros.h>
 #include <asm/asm.h>
 #include <asm/csr.h>
 #include <asm/scs.h>
@@ -46,7 +47,7 @@
 	 * a0 = &new_vmalloc[BIT_WORD(cpu)]
 	 * a1 = BIT_MASK(cpu)
 	 */
-	REG_L 	a2, TASK_TI_CPU(tp)
+	lw	a2, TASK_TI_CPU(tp)
 	/*
 	 * Compute the new_vmalloc element position:
 	 * (cpu / 64) * 8 = (cpu >> 6) << 3
diff --git a/arch/riscv/kernel/kexec_elf.c b/arch/riscv/kernel/kexec_elf.c
index 56444c7bd34e..531d348db84d 100644
--- a/arch/riscv/kernel/kexec_elf.c
+++ b/arch/riscv/kernel/kexec_elf.c
@@ -28,7 +28,7 @@ static int riscv_kexec_elf_load(struct kimage *image, struct elfhdr *ehdr,
 	int i;
 	int ret = 0;
 	size_t size;
-	struct kexec_buf kbuf;
+	struct kexec_buf kbuf = {};
 	const struct elf_phdr *phdr;
 
 	kbuf.image = image;
@@ -66,7 +66,7 @@ static int elf_find_pbase(struct kimage *image, unsigned long kernel_len,
 {
 	int i;
 	int ret;
-	struct kexec_buf kbuf;
+	struct kexec_buf kbuf = {};
 	const struct elf_phdr *phdr;
 	unsigned long lowest_paddr = ULONG_MAX;
 	unsigned long lowest_vaddr = ULONG_MAX;
diff --git a/arch/riscv/kernel/kexec_image.c b/arch/riscv/kernel/kexec_image.c
index 26a81774a78a..8f2eb900910b 100644
--- a/arch/riscv/kernel/kexec_image.c
+++ b/arch/riscv/kernel/kexec_image.c
@@ -41,7 +41,7 @@ static void *image_load(struct kimage *image,
 	struct riscv_image_header *h;
 	u64 flags;
 	bool be_image, be_kernel;
-	struct kexec_buf kbuf;
+	struct kexec_buf kbuf = {};
 	int ret;
 
 	/* Check Image header */
diff --git a/arch/riscv/kernel/machine_kexec_file.c b/arch/riscv/kernel/machine_kexec_file.c
index e36104af2e24..dd9d92a96517 100644
--- a/arch/riscv/kernel/machine_kexec_file.c
+++ b/arch/riscv/kernel/machine_kexec_file.c
@@ -15,6 +15,7 @@
 #include <linux/memblock.h>
 #include <linux/vmalloc.h>
 #include <asm/setup.h>
+#include <asm/insn.h>
 
 const struct kexec_file_ops * const kexec_file_loaders[] = {
 	&elf_kexec_ops,
@@ -109,7 +110,6 @@ static char *setup_kdump_cmdline(struct kimage *image, char *cmdline,
 }
 #endif
 
-#define RV_X(x, s, n)  (((x) >> (s)) & ((1 << (n)) - 1))
 #define RISCV_IMM_BITS 12
 #define RISCV_IMM_REACH (1LL << RISCV_IMM_BITS)
 #define RISCV_CONST_HIGH_PART(x) \
@@ -261,7 +261,7 @@ int load_extra_segments(struct kimage *image, unsigned long kernel_start,
 	int ret;
 	void *fdt;
 	unsigned long initrd_pbase = 0UL;
-	struct kexec_buf kbuf;
+	struct kexec_buf kbuf = {};
 	char *modified_cmdline = NULL;
 
 	kbuf.image = image;
diff --git a/arch/riscv/kernel/pi/Makefile b/arch/riscv/kernel/pi/Makefile
index 7dd15be69c90..bc098edac898 100644
--- a/arch/riscv/kernel/pi/Makefile
+++ b/arch/riscv/kernel/pi/Makefile
@@ -39,4 +39,4 @@ $(obj)/ctype.o: $(srctree)/lib/ctype.c FORCE
 	$(call if_changed_rule,cc_o_c)
 
 obj-y		:= cmdline_early.pi.o fdt_early.pi.o string.pi.o ctype.pi.o lib-fdt.pi.o lib-fdt_ro.pi.o archrandom_early.pi.o
-extra-y		:= $(patsubst %.pi.o,%.o,$(obj-y))
+targets		:= $(patsubst %.pi.o,%.o,$(obj-y))
diff --git a/arch/riscv/kernel/pi/cmdline_early.c b/arch/riscv/kernel/pi/cmdline_early.c
index fbcdc9e4e143..389d086a0718 100644
--- a/arch/riscv/kernel/pi/cmdline_early.c
+++ b/arch/riscv/kernel/pi/cmdline_early.c
@@ -41,9 +41,9 @@ static char *get_early_cmdline(uintptr_t dtb_pa)
 static u64 match_noXlvl(char *cmdline)
 {
 	if (strstr(cmdline, "no4lvl"))
-		return SATP_MODE_48;
+		return SATP_MODE_39;
 	else if (strstr(cmdline, "no5lvl"))
-		return SATP_MODE_57;
+		return SATP_MODE_48;
 
 	return 0;
 }
diff --git a/arch/riscv/kernel/pi/fdt_early.c b/arch/riscv/kernel/pi/fdt_early.c
index 9bdee2fafe47..a12ff8090f19 100644
--- a/arch/riscv/kernel/pi/fdt_early.c
+++ b/arch/riscv/kernel/pi/fdt_early.c
@@ -3,6 +3,7 @@
 #include <linux/init.h>
 #include <linux/libfdt.h>
 #include <linux/ctype.h>
+#include <asm/csr.h>
 
 #include "pi.h"
 
@@ -183,3 +184,42 @@ bool fdt_early_match_extension_isa(const void *fdt, const char *ext_name)
 
 	return ret;
 }
+
+/**
+ *  set_satp_mode_from_fdt - determine SATP mode based on the MMU type in fdt
+ *
+ * @dtb_pa: physical address of the device tree blob
+ *
+ *  Returns the SATP mode corresponding to the MMU type of the first enabled CPU,
+ *  0 otherwise
+ */
+u64 set_satp_mode_from_fdt(uintptr_t dtb_pa)
+{
+	const void *fdt = (const void *)dtb_pa;
+	const char *mmu_type;
+	int node, parent;
+
+	parent = fdt_path_offset(fdt, "/cpus");
+	if (parent < 0)
+		return 0;
+
+	fdt_for_each_subnode(node, fdt, parent) {
+		if (!fdt_node_name_eq(fdt, node, "cpu"))
+			continue;
+
+		if (!fdt_device_is_available(fdt, node))
+			continue;
+
+		mmu_type = fdt_getprop(fdt, node, "mmu-type", NULL);
+		if (!mmu_type)
+			break;
+
+		if (!strcmp(mmu_type, "riscv,sv39"))
+			return SATP_MODE_39;
+		else if (!strcmp(mmu_type, "riscv,sv48"))
+			return SATP_MODE_48;
+		break;
+	}
+
+	return 0;
+}
diff --git a/arch/riscv/kernel/pi/pi.h b/arch/riscv/kernel/pi/pi.h
index 21141d84fea6..3fee2cfddf7c 100644
--- a/arch/riscv/kernel/pi/pi.h
+++ b/arch/riscv/kernel/pi/pi.h
@@ -14,6 +14,7 @@ u64 get_kaslr_seed(uintptr_t dtb_pa);
 u64 get_kaslr_seed_zkr(const uintptr_t dtb_pa);
 bool set_nokaslr_from_cmdline(uintptr_t dtb_pa);
 u64 set_satp_mode_from_cmdline(uintptr_t dtb_pa);
+u64 set_satp_mode_from_fdt(uintptr_t dtb_pa);
 
 bool fdt_early_match_extension_isa(const void *fdt, const char *ext_name);
 
diff --git a/arch/riscv/kernel/probes/simulate-insn.c b/arch/riscv/kernel/probes/simulate-insn.c
index 6c166029079c..fa581590c1f8 100644
--- a/arch/riscv/kernel/probes/simulate-insn.c
+++ b/arch/riscv/kernel/probes/simulate-insn.c
@@ -41,19 +41,16 @@ bool __kprobes simulate_jal(u32 opcode, unsigned long addr, struct pt_regs *regs
 	 *     1         10          1           8       5    JAL/J
 	 */
 	bool ret;
-	u32 imm;
-	u32 index = (opcode >> 7) & 0x1f;
+	s32 imm;
+	u32 index = RV_EXTRACT_RD_REG(opcode);
 
 	ret = rv_insn_reg_set_val(regs, index, addr + 4);
 	if (!ret)
 		return ret;
 
-	imm  = ((opcode >> 21) & 0x3ff) << 1;
-	imm |= ((opcode >> 20) & 0x1)   << 11;
-	imm |= ((opcode >> 12) & 0xff)  << 12;
-	imm |= ((opcode >> 31) & 0x1)   << 20;
+	imm = RV_EXTRACT_JTYPE_IMM(opcode);
 
-	instruction_pointer_set(regs, addr + sign_extend32((imm), 20));
+	instruction_pointer_set(regs, addr + imm);
 
 	return ret;
 }
@@ -67,9 +64,9 @@ bool __kprobes simulate_jalr(u32 opcode, unsigned long addr, struct pt_regs *reg
 	 */
 	bool ret;
 	unsigned long base_addr;
-	u32 imm = (opcode >> 20) & 0xfff;
-	u32 rd_index = (opcode >> 7) & 0x1f;
-	u32 rs1_index = (opcode >> 15) & 0x1f;
+	u32 imm = RV_EXTRACT_ITYPE_IMM(opcode);
+	u32 rd_index = RV_EXTRACT_RD_REG(opcode);
+	u32 rs1_index = RV_EXTRACT_RS1_REG(opcode);
 
 	ret = rv_insn_reg_get_val(regs, rs1_index, &base_addr);
 	if (!ret)
@@ -84,20 +81,6 @@ bool __kprobes simulate_jalr(u32 opcode, unsigned long addr, struct pt_regs *reg
 	return ret;
 }
 
-#define auipc_rd_idx(opcode) \
-	((opcode >> 7) & 0x1f)
-
-#define auipc_imm(opcode) \
-	((((opcode) >> 12) & 0xfffff) << 12)
-
-#if __riscv_xlen == 64
-#define auipc_offset(opcode)	sign_extend64(auipc_imm(opcode), 31)
-#elif __riscv_xlen == 32
-#define auipc_offset(opcode)	auipc_imm(opcode)
-#else
-#error "Unexpected __riscv_xlen"
-#endif
-
 bool __kprobes simulate_auipc(u32 opcode, unsigned long addr, struct pt_regs *regs)
 {
 	/*
@@ -107,8 +90,8 @@ bool __kprobes simulate_auipc(u32 opcode, unsigned long addr, struct pt_regs *re
 	 *        20       5     7
 	 */
 
-	u32 rd_idx = auipc_rd_idx(opcode);
-	unsigned long rd_val = addr + auipc_offset(opcode);
+	u32 rd_idx = RV_EXTRACT_RD_REG(opcode);
+	unsigned long rd_val = addr + (s32)RV_EXTRACT_UTYPE_IMM(opcode);
 
 	if (!rv_insn_reg_set_val(regs, rd_idx, rd_val))
 		return false;
@@ -118,24 +101,6 @@ bool __kprobes simulate_auipc(u32 opcode, unsigned long addr, struct pt_regs *re
 	return true;
 }
 
-#define branch_rs1_idx(opcode) \
-	(((opcode) >> 15) & 0x1f)
-
-#define branch_rs2_idx(opcode) \
-	(((opcode) >> 20) & 0x1f)
-
-#define branch_funct3(opcode) \
-	(((opcode) >> 12) & 0x7)
-
-#define branch_imm(opcode) \
-	(((((opcode) >>  8) & 0xf ) <<  1) | \
-	 ((((opcode) >> 25) & 0x3f) <<  5) | \
-	 ((((opcode) >>  7) & 0x1 ) << 11) | \
-	 ((((opcode) >> 31) & 0x1 ) << 12))
-
-#define branch_offset(opcode) \
-	sign_extend32((branch_imm(opcode)), 12)
-
 bool __kprobes simulate_branch(u32 opcode, unsigned long addr, struct pt_regs *regs)
 {
 	/*
@@ -156,12 +121,12 @@ bool __kprobes simulate_branch(u32 opcode, unsigned long addr, struct pt_regs *r
 	unsigned long rs1_val;
 	unsigned long rs2_val;
 
-	if (!rv_insn_reg_get_val(regs, branch_rs1_idx(opcode), &rs1_val) ||
-	    !rv_insn_reg_get_val(regs, branch_rs2_idx(opcode), &rs2_val))
+	if (!rv_insn_reg_get_val(regs, RV_EXTRACT_RS1_REG(opcode), &rs1_val) ||
+	    !rv_insn_reg_get_val(regs, RV_EXTRACT_RS2_REG(opcode), &rs2_val))
 		return false;
 
-	offset_tmp = branch_offset(opcode);
-	switch (branch_funct3(opcode)) {
+	offset_tmp = RV_EXTRACT_BTYPE_IMM(opcode);
+	switch (RV_EXTRACT_FUNCT3(opcode)) {
 	case RVG_FUNCT3_BEQ:
 		offset = (rs1_val == rs2_val) ? offset_tmp : 4;
 		break;
@@ -191,24 +156,9 @@ bool __kprobes simulate_branch(u32 opcode, unsigned long addr, struct pt_regs *r
 
 bool __kprobes simulate_c_j(u32 opcode, unsigned long addr, struct pt_regs *regs)
 {
-	/*
-	 *  15    13 12                            2 1      0
-	 * | funct3 | offset[11|4|9:8|10|6|7|3:1|5] | opcode |
-	 *     3                   11                    2
-	 */
-
-	s32 offset;
+	s32 offset = RVC_EXTRACT_JTYPE_IMM(opcode);
 
-	offset  = ((opcode >> 3)  & 0x7) << 1;
-	offset |= ((opcode >> 11) & 0x1) << 4;
-	offset |= ((opcode >> 2)  & 0x1) << 5;
-	offset |= ((opcode >> 7)  & 0x1) << 6;
-	offset |= ((opcode >> 6)  & 0x1) << 7;
-	offset |= ((opcode >> 9)  & 0x3) << 8;
-	offset |= ((opcode >> 8)  & 0x1) << 10;
-	offset |= ((opcode >> 12) & 0x1) << 11;
-
-	instruction_pointer_set(regs, addr + sign_extend32(offset, 11));
+	instruction_pointer_set(regs, addr + offset);
 
 	return true;
 }
@@ -224,7 +174,7 @@ static bool __kprobes simulate_c_jr_jalr(u32 opcode, unsigned long addr, struct
 
 	unsigned long jump_addr;
 
-	u32 rs1 = (opcode >> 7) & 0x1f;
+	u32 rs1 = RVC_EXTRACT_C2_RS1_REG(opcode);
 
 	if (rs1 == 0) /* C.JR is only valid when rs1 != x0 */
 		return false;
@@ -268,16 +218,10 @@ static bool __kprobes simulate_c_bnez_beqz(u32 opcode, unsigned long addr, struc
 	if (!rv_insn_reg_get_val(regs, rs1, &rs1_val))
 		return false;
 
-	if ((rs1_val != 0 && is_bnez) || (rs1_val == 0 && !is_bnez)) {
-		offset =  ((opcode >> 3)  & 0x3) << 1;
-		offset |= ((opcode >> 10) & 0x3) << 3;
-		offset |= ((opcode >> 2)  & 0x1) << 5;
-		offset |= ((opcode >> 5)  & 0x3) << 6;
-		offset |= ((opcode >> 12) & 0x1) << 8;
-		offset = sign_extend32(offset, 8);
-	} else {
+	if ((rs1_val != 0 && is_bnez) || (rs1_val == 0 && !is_bnez))
+		offset = RVC_EXTRACT_BTYPE_IMM(opcode);
+	else
 		offset = 2;
-	}
 
 	instruction_pointer_set(regs, addr + offset);
 
diff --git a/arch/riscv/kernel/process.c b/arch/riscv/kernel/process.c
index a0a40889d79a..31a392993cb4 100644
--- a/arch/riscv/kernel/process.c
+++ b/arch/riscv/kernel/process.c
@@ -223,7 +223,7 @@ asmlinkage void ret_from_fork_user(struct pt_regs *regs)
 
 int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
-	unsigned long clone_flags = args->flags;
+	u64 clone_flags = args->flags;
 	unsigned long usp = args->stack;
 	unsigned long tls = args->tls;
 	struct pt_regs *childregs = task_pt_regs(p);
diff --git a/arch/riscv/kernel/sbi.c b/arch/riscv/kernel/sbi.c
index 53836a9235e3..5e8cde055264 100644
--- a/arch/riscv/kernel/sbi.c
+++ b/arch/riscv/kernel/sbi.c
@@ -148,7 +148,7 @@ static int __sbi_rfence_v01(int fid, const struct cpumask *cpu_mask,
 
 static void sbi_set_power_off(void)
 {
-	pm_power_off = sbi_shutdown;
+	register_platform_power_off(sbi_shutdown);
 }
 #else
 static void __sbi_set_timer_v01(uint64_t stime_value)
@@ -682,7 +682,7 @@ void __init sbi_init(void)
 		if (sbi_spec_version >= sbi_mk_version(0, 3) &&
 		    sbi_probe_extension(SBI_EXT_SRST)) {
 			pr_info("SBI SRST extension detected\n");
-			pm_power_off = sbi_srst_power_off;
+			register_platform_power_off(sbi_srst_power_off);
 			sbi_srst_reboot_nb.notifier_call = sbi_srst_reboot;
 			sbi_srst_reboot_nb.priority = 192;
 			register_restart_handler(&sbi_srst_reboot_nb);
diff --git a/arch/riscv/kernel/setup.c b/arch/riscv/kernel/setup.c
index f90cce7a3ace..14235e58c539 100644
--- a/arch/riscv/kernel/setup.c
+++ b/arch/riscv/kernel/setup.c
@@ -290,6 +290,7 @@ static void __init riscv_spinlock_init(void)
 
 	if (IS_ENABLED(CONFIG_RISCV_ISA_ZABHA) &&
 	    IS_ENABLED(CONFIG_RISCV_ISA_ZACAS) &&
+	    IS_ENABLED(CONFIG_TOOLCHAIN_HAS_ZACAS) &&
 	    riscv_isa_extension_available(NULL, ZABHA) &&
 	    riscv_isa_extension_available(NULL, ZACAS)) {
 		using_ext = "using Zabha";
diff --git a/arch/riscv/kernel/sys_hwprobe.c b/arch/riscv/kernel/sys_hwprobe.c
index 0b170e18a2be..000f4451a9d8 100644
--- a/arch/riscv/kernel/sys_hwprobe.c
+++ b/arch/riscv/kernel/sys_hwprobe.c
@@ -15,6 +15,7 @@
 #include <asm/uaccess.h>
 #include <asm/unistd.h>
 #include <asm/vector.h>
+#include <asm/vendor_extensions/mips_hwprobe.h>
 #include <asm/vendor_extensions/sifive_hwprobe.h>
 #include <asm/vendor_extensions/thead_hwprobe.h>
 #include <vdso/vsyscall.h>
@@ -153,14 +154,12 @@ static void hwprobe_isa_ext0(struct riscv_hwprobe *pair,
 			EXT_KEY(ZVKT);
 		}
 
-		if (has_fpu()) {
-			EXT_KEY(ZCD);
-			EXT_KEY(ZCF);
-			EXT_KEY(ZFA);
-			EXT_KEY(ZFBFMIN);
-			EXT_KEY(ZFH);
-			EXT_KEY(ZFHMIN);
-		}
+		EXT_KEY(ZCD);
+		EXT_KEY(ZCF);
+		EXT_KEY(ZFA);
+		EXT_KEY(ZFBFMIN);
+		EXT_KEY(ZFH);
+		EXT_KEY(ZFHMIN);
 
 		if (IS_ENABLED(CONFIG_RISCV_ISA_SUPM))
 			EXT_KEY(SUPM);
@@ -309,6 +308,9 @@ static void hwprobe_one_pair(struct riscv_hwprobe *pair,
 	case RISCV_HWPROBE_KEY_VENDOR_EXT_THEAD_0:
 		hwprobe_isa_vendor_ext_thead_0(pair, cpus);
 		break;
+	case RISCV_HWPROBE_KEY_VENDOR_EXT_MIPS_0:
+		hwprobe_isa_vendor_ext_mips_0(pair, cpus);
+		break;
 
 	/*
 	 * For forward compatibility, unknown keys don't fail the whole
diff --git a/arch/riscv/kernel/sys_riscv.c b/arch/riscv/kernel/sys_riscv.c
index d77afe05578f..795b2e815ac9 100644
--- a/arch/riscv/kernel/sys_riscv.c
+++ b/arch/riscv/kernel/sys_riscv.c
@@ -10,7 +10,7 @@
 
 static long riscv_sys_mmap(unsigned long addr, unsigned long len,
 			   unsigned long prot, unsigned long flags,
-			   unsigned long fd, off_t offset,
+			   unsigned long fd, unsigned long offset,
 			   unsigned long page_shift_offset)
 {
 	if (unlikely(offset & (~PAGE_MASK >> page_shift_offset)))
diff --git a/arch/riscv/kernel/tests/Kconfig.debug b/arch/riscv/kernel/tests/Kconfig.debug
index 78cea5d2c270..5db4df44279e 100644
--- a/arch/riscv/kernel/tests/Kconfig.debug
+++ b/arch/riscv/kernel/tests/Kconfig.debug
@@ -30,6 +30,18 @@ config RISCV_MODULE_LINKING_KUNIT
 
          If unsure, say N.
 
+config RISCV_KPROBES_KUNIT
+       bool "KUnit test for riscv kprobes" if !KUNIT_ALL_TESTS
+       depends on KUNIT
+       depends on KPROBES
+       default KUNIT_ALL_TESTS
+       help
+         Enable testing for riscv kprobes. Useful for riscv and/or kprobes
+         development. The test verifies that kprobes do not change the behaviour
+         of some sample functions.
+
+         If unsure, say N.
+
 endif # RUNTIME_TESTING_MENU
 
 endmenu # "arch/riscv/kernel runtime Testing"
diff --git a/arch/riscv/kernel/tests/Makefile b/arch/riscv/kernel/tests/Makefile
index 7d6c76cffe20..407e7e6c28dc 100644
--- a/arch/riscv/kernel/tests/Makefile
+++ b/arch/riscv/kernel/tests/Makefile
@@ -1 +1,2 @@
 obj-$(CONFIG_RISCV_MODULE_LINKING_KUNIT)	+= module_test/
+obj-$(CONFIG_RISCV_KPROBES_KUNIT)		+= kprobes/
diff --git a/arch/riscv/kernel/tests/kprobes/Makefile b/arch/riscv/kernel/tests/kprobes/Makefile
new file mode 100644
index 000000000000..4cb6c66a98e8
--- /dev/null
+++ b/arch/riscv/kernel/tests/kprobes/Makefile
@@ -0,0 +1 @@
+obj-y += test-kprobes.o test-kprobes-asm.o
diff --git a/arch/riscv/kernel/tests/kprobes/test-kprobes-asm.S b/arch/riscv/kernel/tests/kprobes/test-kprobes-asm.S
new file mode 100644
index 000000000000..b951d0f12482
--- /dev/null
+++ b/arch/riscv/kernel/tests/kprobes/test-kprobes-asm.S
@@ -0,0 +1,229 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#include <linux/linkage.h>
+#include <asm/asm.h>
+#include "test-kprobes.h"
+
+SYM_FUNC_START(test_kprobes_add)
+	li a1, KPROBE_TEST_MAGIC_UPPER
+	li a2, KPROBE_TEST_MAGIC_LOWER
+test_kprobes_add_addr1:
+	add a1, a1, a2
+test_kprobes_add_addr2:
+	add a0, a1, x0
+	ret
+SYM_FUNC_END(test_kprobes_add)
+
+SYM_FUNC_START(test_kprobes_jal)
+	li a0, 0
+	mv a1, ra
+	.option push
+	.option norvc
+test_kprobes_jal_addr1:
+	jal x0, 2f
+	ret
+	.option pop
+1:	li a0, KPROBE_TEST_MAGIC_UPPER
+	ret
+	.option push
+	.option norvc
+test_kprobes_jal_addr2:
+2:	jal 1b
+	.option pop
+	li a2, KPROBE_TEST_MAGIC_LOWER
+	add a0, a0, a2
+	jr a1
+SYM_FUNC_END(test_kprobes_jal)
+
+SYM_FUNC_START(test_kprobes_jalr)
+	la a0, 1f
+	mv a1, ra
+	.option push
+	.option norvc
+test_kprobes_jalr_addr:
+	jalr a0
+	.option pop
+	li t0, KPROBE_TEST_MAGIC_UPPER
+	add a0, a0, t0
+	jr a1
+1:	li a0, KPROBE_TEST_MAGIC_LOWER
+	ret
+SYM_FUNC_END(test_kprobes_jalr)
+
+SYM_FUNC_START(test_kprobes_auipc)
+test_kprobes_auipc_addr:
+	auipc a0, KPROBE_TEST_MAGIC_LOWER
+	la a1, test_kprobes_auipc_addr
+	sub a0, a0, a1
+	srli a0, a0, 12
+	li a1, KPROBE_TEST_MAGIC_UPPER
+	add a0, a0, a1
+	ret
+SYM_FUNC_END(test_kprobes_auipc)
+
+SYM_FUNC_START(test_kprobes_branch)
+	.option push
+	.option norvc
+	li a0, 0
+	li a1, 1
+	li a2, 2
+test_kprobes_branch_addr1:
+	beqz a0, 1f
+	ret
+1:
+test_kprobes_branch_addr2:
+	beqz a1, 3f
+test_kprobes_branch_addr3:
+	bnez a0, 3f
+test_kprobes_branch_addr4:
+	bnez a2, 1f
+	ret
+1:
+test_kprobes_branch_addr5:
+	bge a1, a2, 3f
+test_kprobes_branch_addr6:
+	bge a2, a1, 2f
+	ret
+1:
+	li t0, KPROBE_TEST_MAGIC_UPPER
+	add a0, a0, t0
+	ret
+2:
+test_kprobes_branch_addr7:
+	blt a2, a1, 3f
+	li a0, KPROBE_TEST_MAGIC_LOWER
+test_kprobes_branch_addr8:
+	blt a1, a2, 1b
+3:
+	li a0, 0
+	ret
+	.option pop
+SYM_FUNC_END(test_kprobes_branch)
+
+#ifdef CONFIG_RISCV_ISA_C
+
+SYM_FUNC_START(test_kprobes_c_j)
+	li a0, 0
+test_kprobes_branch_c_j_addr1:
+	c.j 2f
+1:
+	li a1, KPROBE_TEST_MAGIC_UPPER
+	add a0, a0, a1
+	ret
+2:	li a0, KPROBE_TEST_MAGIC_LOWER
+test_kprobes_branch_c_j_addr2:
+	c.j 1b
+SYM_FUNC_END(test_kprobes_c_j)
+
+SYM_FUNC_START(test_kprobes_c_jr)
+	la a0, 2f
+test_kprobes_c_jr_addr1:
+	c.jr a0
+	ret
+1:	li a1, KPROBE_TEST_MAGIC_LOWER
+	add a0, a0, a1
+	ret
+2:
+	li a0, KPROBE_TEST_MAGIC_UPPER
+	la a1, 1b
+test_kprobes_c_jr_addr2:
+	c.jr a1
+SYM_FUNC_END(test_kprobes_c_jr)
+
+SYM_FUNC_START(test_kprobes_c_jalr)
+	mv a1, ra
+	la a0, 1f
+test_kprobes_c_jalr_addr:
+	c.jalr a0
+	li a2, KPROBE_TEST_MAGIC_UPPER
+	add a0, a0, a2
+	jr a1
+1:	li a0, KPROBE_TEST_MAGIC_LOWER
+	ret
+SYM_FUNC_END(test_kprobes_c_jalr)
+
+SYM_FUNC_START(test_kprobes_c_beqz)
+	li a0, 0
+	li a1, 1
+test_kprobes_c_beqz_addr1:
+	c.beqz a0, 2f
+	ret
+1:	li a1, KPROBE_TEST_MAGIC_UPPER
+	add a0, a0, a1
+	ret
+test_kprobes_c_beqz_addr2:
+2:	c.beqz a1, 3f
+	li a0, KPROBE_TEST_MAGIC_LOWER
+	mv a1, x0
+test_kprobes_c_beqz_addr3:
+	c.beqz a1, 1b
+3:	li a0, 0
+	ret
+SYM_FUNC_END(test_kprobes_c_beqz)
+
+SYM_FUNC_START(test_kprobes_c_bnez)
+	li a0, 0
+	li a1, 1
+test_kprobes_c_bnez_addr1:
+	c.bnez a1, 2f
+	ret
+1:	li a1, KPROBE_TEST_MAGIC_UPPER
+	add a0, a0, a1
+	ret
+test_kprobes_c_bnez_addr2:
+2:	c.bnez a0, 3f
+	li a0, KPROBE_TEST_MAGIC_LOWER
+test_kprobes_c_bnez_addr3:
+	c.bnez a0, 1b
+3:	li a0, 0
+	ret
+SYM_FUNC_END(test_kprobes_c_bnez)
+
+#endif /* CONFIG_RISCV_ISA_C */
+
+SYM_DATA_START(test_kprobes_addresses)
+	RISCV_PTR test_kprobes_add_addr1
+	RISCV_PTR test_kprobes_add_addr2
+	RISCV_PTR test_kprobes_jal_addr1
+	RISCV_PTR test_kprobes_jal_addr2
+	RISCV_PTR test_kprobes_jalr_addr
+	RISCV_PTR test_kprobes_auipc_addr
+	RISCV_PTR test_kprobes_branch_addr1
+	RISCV_PTR test_kprobes_branch_addr2
+	RISCV_PTR test_kprobes_branch_addr3
+	RISCV_PTR test_kprobes_branch_addr4
+	RISCV_PTR test_kprobes_branch_addr5
+	RISCV_PTR test_kprobes_branch_addr6
+	RISCV_PTR test_kprobes_branch_addr7
+	RISCV_PTR test_kprobes_branch_addr8
+#ifdef CONFIG_RISCV_ISA_C
+	RISCV_PTR test_kprobes_branch_c_j_addr1
+	RISCV_PTR test_kprobes_branch_c_j_addr2
+	RISCV_PTR test_kprobes_c_jr_addr1
+	RISCV_PTR test_kprobes_c_jr_addr2
+	RISCV_PTR test_kprobes_c_jalr_addr
+	RISCV_PTR test_kprobes_c_beqz_addr1
+	RISCV_PTR test_kprobes_c_beqz_addr2
+	RISCV_PTR test_kprobes_c_beqz_addr3
+	RISCV_PTR test_kprobes_c_bnez_addr1
+	RISCV_PTR test_kprobes_c_bnez_addr2
+	RISCV_PTR test_kprobes_c_bnez_addr3
+#endif /* CONFIG_RISCV_ISA_C */
+	RISCV_PTR 0
+SYM_DATA_END(test_kprobes_addresses)
+
+SYM_DATA_START(test_kprobes_functions)
+	RISCV_PTR test_kprobes_add
+	RISCV_PTR test_kprobes_jal
+	RISCV_PTR test_kprobes_jalr
+	RISCV_PTR test_kprobes_auipc
+	RISCV_PTR test_kprobes_branch
+#ifdef CONFIG_RISCV_ISA_C
+	RISCV_PTR test_kprobes_c_j
+	RISCV_PTR test_kprobes_c_jr
+	RISCV_PTR test_kprobes_c_jalr
+	RISCV_PTR test_kprobes_c_beqz
+	RISCV_PTR test_kprobes_c_bnez
+#endif /* CONFIG_RISCV_ISA_C */
+	RISCV_PTR 0
+SYM_DATA_END(test_kprobes_functions)
diff --git a/arch/riscv/kernel/tests/kprobes/test-kprobes.c b/arch/riscv/kernel/tests/kprobes/test-kprobes.c
new file mode 100644
index 000000000000..6f6cdfbf5a95
--- /dev/null
+++ b/arch/riscv/kernel/tests/kprobes/test-kprobes.c
@@ -0,0 +1,56 @@
+// SPDX-License-Identifier: GPL-2.0+
+
+#include <linux/kernel.h>
+#include <linux/kprobes.h>
+#include <kunit/test.h>
+#include "test-kprobes.h"
+
+static int kprobe_dummy_handler(struct kprobe *kp, struct pt_regs *regs)
+{
+	return 0;
+}
+
+static void test_kprobe_riscv(struct kunit *test)
+{
+	unsigned int num_kprobe = 0;
+	long (*func)(void);
+	struct kprobe *kp;
+	int i;
+
+	while (test_kprobes_addresses[num_kprobe])
+		num_kprobe++;
+
+	kp = kcalloc(num_kprobe, sizeof(*kp), GFP_KERNEL);
+	KUNIT_EXPECT_TRUE(test, kp);
+	if (!kp)
+		return;
+
+	for (i = 0; i < num_kprobe; ++i) {
+		kp[i].addr = test_kprobes_addresses[i];
+		kp[i].pre_handler = kprobe_dummy_handler;
+		KUNIT_EXPECT_EQ(test, 0, register_kprobe(&kp[i]));
+	}
+
+	for (i = 0;; ++i) {
+		func = test_kprobes_functions[i];
+		if (!func)
+			break;
+		KUNIT_EXPECT_EQ_MSG(test, KPROBE_TEST_MAGIC, func(), "function %d broken", i);
+	}
+
+	for (i = 0; i < num_kprobe; ++i)
+		unregister_kprobe(&kp[i]);
+	kfree(kp);
+}
+
+static struct kunit_case kprobes_testcases[] = {
+	KUNIT_CASE(test_kprobe_riscv),
+	{}
+};
+
+static struct kunit_suite kprobes_test_suite = {
+	.name = "kprobes_test_riscv",
+	.test_cases = kprobes_testcases,
+};
+
+kunit_test_suites(&kprobes_test_suite);
diff --git a/arch/riscv/kernel/tests/kprobes/test-kprobes.h b/arch/riscv/kernel/tests/kprobes/test-kprobes.h
new file mode 100644
index 000000000000..3886ab491ecb
--- /dev/null
+++ b/arch/riscv/kernel/tests/kprobes/test-kprobes.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+#ifndef TEST_KPROBES_H
+#define TEST_KPROBES_H
+
+/*
+ * The magic value that all the functions in the test_kprobes_functions array return. The test
+ * installs kprobes into these functions, and verify that the functions still correctly return this
+ * value.
+ */
+#define KPROBE_TEST_MAGIC          0xcafebabe
+#define KPROBE_TEST_MAGIC_LOWER    0x0000babe
+#define KPROBE_TEST_MAGIC_UPPER    0xcafe0000
+
+#ifndef __ASSEMBLY__
+
+/* array of addresses to install kprobes */
+extern void *test_kprobes_addresses[];
+
+/* array of functions that return KPROBE_TEST_MAGIC */
+extern long (*test_kprobes_functions[])(void);
+
+#endif /* __ASSEMBLY__ */
+
+#endif /* TEST_KPROBES_H */
diff --git a/arch/riscv/kernel/traps_misaligned.c b/arch/riscv/kernel/traps_misaligned.c
index f760e4fcc052..2a27d3ff4ac6 100644
--- a/arch/riscv/kernel/traps_misaligned.c
+++ b/arch/riscv/kernel/traps_misaligned.c
@@ -18,149 +18,7 @@
 #include <asm/cpufeature.h>
 #include <asm/sbi.h>
 #include <asm/vector.h>
-
-#define INSN_MATCH_LB			0x3
-#define INSN_MASK_LB			0x707f
-#define INSN_MATCH_LH			0x1003
-#define INSN_MASK_LH			0x707f
-#define INSN_MATCH_LW			0x2003
-#define INSN_MASK_LW			0x707f
-#define INSN_MATCH_LD			0x3003
-#define INSN_MASK_LD			0x707f
-#define INSN_MATCH_LBU			0x4003
-#define INSN_MASK_LBU			0x707f
-#define INSN_MATCH_LHU			0x5003
-#define INSN_MASK_LHU			0x707f
-#define INSN_MATCH_LWU			0x6003
-#define INSN_MASK_LWU			0x707f
-#define INSN_MATCH_SB			0x23
-#define INSN_MASK_SB			0x707f
-#define INSN_MATCH_SH			0x1023
-#define INSN_MASK_SH			0x707f
-#define INSN_MATCH_SW			0x2023
-#define INSN_MASK_SW			0x707f
-#define INSN_MATCH_SD			0x3023
-#define INSN_MASK_SD			0x707f
-
-#define INSN_MATCH_FLW			0x2007
-#define INSN_MASK_FLW			0x707f
-#define INSN_MATCH_FLD			0x3007
-#define INSN_MASK_FLD			0x707f
-#define INSN_MATCH_FLQ			0x4007
-#define INSN_MASK_FLQ			0x707f
-#define INSN_MATCH_FSW			0x2027
-#define INSN_MASK_FSW			0x707f
-#define INSN_MATCH_FSD			0x3027
-#define INSN_MASK_FSD			0x707f
-#define INSN_MATCH_FSQ			0x4027
-#define INSN_MASK_FSQ			0x707f
-
-#define INSN_MATCH_C_LD			0x6000
-#define INSN_MASK_C_LD			0xe003
-#define INSN_MATCH_C_SD			0xe000
-#define INSN_MASK_C_SD			0xe003
-#define INSN_MATCH_C_LW			0x4000
-#define INSN_MASK_C_LW			0xe003
-#define INSN_MATCH_C_SW			0xc000
-#define INSN_MASK_C_SW			0xe003
-#define INSN_MATCH_C_LDSP		0x6002
-#define INSN_MASK_C_LDSP		0xe003
-#define INSN_MATCH_C_SDSP		0xe002
-#define INSN_MASK_C_SDSP		0xe003
-#define INSN_MATCH_C_LWSP		0x4002
-#define INSN_MASK_C_LWSP		0xe003
-#define INSN_MATCH_C_SWSP		0xc002
-#define INSN_MASK_C_SWSP		0xe003
-
-#define INSN_MATCH_C_FLD		0x2000
-#define INSN_MASK_C_FLD			0xe003
-#define INSN_MATCH_C_FLW		0x6000
-#define INSN_MASK_C_FLW			0xe003
-#define INSN_MATCH_C_FSD		0xa000
-#define INSN_MASK_C_FSD			0xe003
-#define INSN_MATCH_C_FSW		0xe000
-#define INSN_MASK_C_FSW			0xe003
-#define INSN_MATCH_C_FLDSP		0x2002
-#define INSN_MASK_C_FLDSP		0xe003
-#define INSN_MATCH_C_FSDSP		0xa002
-#define INSN_MASK_C_FSDSP		0xe003
-#define INSN_MATCH_C_FLWSP		0x6002
-#define INSN_MASK_C_FLWSP		0xe003
-#define INSN_MATCH_C_FSWSP		0xe002
-#define INSN_MASK_C_FSWSP		0xe003
-
-#define INSN_MATCH_C_LHU		0x8400
-#define INSN_MASK_C_LHU			0xfc43
-#define INSN_MATCH_C_LH			0x8440
-#define INSN_MASK_C_LH			0xfc43
-#define INSN_MATCH_C_SH			0x8c00
-#define INSN_MASK_C_SH			0xfc43
-
-#define INSN_LEN(insn)			((((insn) & 0x3) < 0x3) ? 2 : 4)
-
-#if defined(CONFIG_64BIT)
-#define LOG_REGBYTES			3
-#define XLEN				64
-#else
-#define LOG_REGBYTES			2
-#define XLEN				32
-#endif
-#define REGBYTES			(1 << LOG_REGBYTES)
-#define XLEN_MINUS_16			((XLEN) - 16)
-
-#define SH_RD				7
-#define SH_RS1				15
-#define SH_RS2				20
-#define SH_RS2C				2
-
-#define RV_X(x, s, n)			(((x) >> (s)) & ((1 << (n)) - 1))
-#define RVC_LW_IMM(x)			((RV_X(x, 6, 1) << 2) | \
-					 (RV_X(x, 10, 3) << 3) | \
-					 (RV_X(x, 5, 1) << 6))
-#define RVC_LD_IMM(x)			((RV_X(x, 10, 3) << 3) | \
-					 (RV_X(x, 5, 2) << 6))
-#define RVC_LWSP_IMM(x)			((RV_X(x, 4, 3) << 2) | \
-					 (RV_X(x, 12, 1) << 5) | \
-					 (RV_X(x, 2, 2) << 6))
-#define RVC_LDSP_IMM(x)			((RV_X(x, 5, 2) << 3) | \
-					 (RV_X(x, 12, 1) << 5) | \
-					 (RV_X(x, 2, 3) << 6))
-#define RVC_SWSP_IMM(x)			((RV_X(x, 9, 4) << 2) | \
-					 (RV_X(x, 7, 2) << 6))
-#define RVC_SDSP_IMM(x)			((RV_X(x, 10, 3) << 3) | \
-					 (RV_X(x, 7, 3) << 6))
-#define RVC_RS1S(insn)			(8 + RV_X(insn, SH_RD, 3))
-#define RVC_RS2S(insn)			(8 + RV_X(insn, SH_RS2C, 3))
-#define RVC_RS2(insn)			RV_X(insn, SH_RS2C, 5)
-
-#define SHIFT_RIGHT(x, y)		\
-	((y) < 0 ? ((x) << -(y)) : ((x) >> (y)))
-
-#define REG_MASK			\
-	((1 << (5 + LOG_REGBYTES)) - (1 << LOG_REGBYTES))
-
-#define REG_OFFSET(insn, pos)		\
-	(SHIFT_RIGHT((insn), (pos) - LOG_REGBYTES) & REG_MASK)
-
-#define REG_PTR(insn, pos, regs)	\
-	(ulong *)((ulong)(regs) + REG_OFFSET(insn, pos))
-
-#define GET_RS1(insn, regs)		(*REG_PTR(insn, SH_RS1, regs))
-#define GET_RS2(insn, regs)		(*REG_PTR(insn, SH_RS2, regs))
-#define GET_RS1S(insn, regs)		(*REG_PTR(RVC_RS1S(insn), 0, regs))
-#define GET_RS2S(insn, regs)		(*REG_PTR(RVC_RS2S(insn), 0, regs))
-#define GET_RS2C(insn, regs)		(*REG_PTR(insn, SH_RS2C, regs))
-#define GET_SP(regs)			(*REG_PTR(2, 0, regs))
-#define SET_RD(insn, regs, val)		(*REG_PTR(insn, SH_RD, regs) = (val))
-#define IMM_I(insn)			((s32)(insn) >> 20)
-#define IMM_S(insn)			(((s32)(insn) >> 25 << 5) | \
-					 (s32)(((insn) >> 7) & 0x1f))
-#define MASK_FUNCT3			0x7000
-
-#define GET_PRECISION(insn) (((insn) >> 25) & 3)
-#define GET_RM(insn) (((insn) >> 12) & 7)
-#define PRECISION_S 0
-#define PRECISION_D 1
+#include <asm/insn.h>
 
 #ifdef CONFIG_FPU
 
diff --git a/arch/riscv/kernel/vector.c b/arch/riscv/kernel/vector.c
index 184f780c932d..901e67adf576 100644
--- a/arch/riscv/kernel/vector.c
+++ b/arch/riscv/kernel/vector.c
@@ -93,7 +93,7 @@ bool insn_is_vector(u32 insn_buf)
 		return true;
 	case RVV_OPCODE_VL:
 	case RVV_OPCODE_VS:
-		width = RVV_EXRACT_VL_VS_WIDTH(insn_buf);
+		width = RVV_EXTRACT_VL_VS_WIDTH(insn_buf);
 		if (width == RVV_VL_VS_WIDTH_8 || width == RVV_VL_VS_WIDTH_16 ||
 		    width == RVV_VL_VS_WIDTH_32 || width == RVV_VL_VS_WIDTH_64)
 			return true;
diff --git a/arch/riscv/kernel/vendor_extensions.c b/arch/riscv/kernel/vendor_extensions.c
index 92d8ff81f42c..bb4a75923685 100644
--- a/arch/riscv/kernel/vendor_extensions.c
+++ b/arch/riscv/kernel/vendor_extensions.c
@@ -6,6 +6,7 @@
 #include <asm/vendorid_list.h>
 #include <asm/vendor_extensions.h>
 #include <asm/vendor_extensions/andes.h>
+#include <asm/vendor_extensions/mips.h>
 #include <asm/vendor_extensions/sifive.h>
 #include <asm/vendor_extensions/thead.h>
 
@@ -16,6 +17,9 @@ struct riscv_isa_vendor_ext_data_list *riscv_isa_vendor_ext_list[] = {
 #ifdef CONFIG_RISCV_ISA_VENDOR_EXT_ANDES
 	&riscv_isa_vendor_ext_list_andes,
 #endif
+#ifdef CONFIG_RISCV_ISA_VENDOR_EXT_MIPS
+	&riscv_isa_vendor_ext_list_mips,
+#endif
 #ifdef CONFIG_RISCV_ISA_VENDOR_EXT_SIFIVE
 	&riscv_isa_vendor_ext_list_sifive,
 #endif
@@ -49,6 +53,12 @@ bool __riscv_isa_vendor_extension_available(int cpu, unsigned long vendor, unsig
 		cpu_bmap = riscv_isa_vendor_ext_list_andes.per_hart_isa_bitmap;
 		break;
 	#endif
+	#ifdef CONFIG_RISCV_ISA_VENDOR_EXT_MIPS
+	case MIPS_VENDOR_ID:
+		bmap = &riscv_isa_vendor_ext_list_mips.all_harts_isa_bitmap;
+		cpu_bmap = riscv_isa_vendor_ext_list_mips.per_hart_isa_bitmap;
+		break;
+	#endif
 	#ifdef CONFIG_RISCV_ISA_VENDOR_EXT_SIFIVE
 	case SIFIVE_VENDOR_ID:
 		bmap = &riscv_isa_vendor_ext_list_sifive.all_harts_isa_bitmap;
diff --git a/arch/riscv/kernel/vendor_extensions/Makefile b/arch/riscv/kernel/vendor_extensions/Makefile
index a4eca96d1c8a..bf116c82b6bd 100644
--- a/arch/riscv/kernel/vendor_extensions/Makefile
+++ b/arch/riscv/kernel/vendor_extensions/Makefile
@@ -1,6 +1,8 @@
 # SPDX-License-Identifier: GPL-2.0-only
 
 obj-$(CONFIG_RISCV_ISA_VENDOR_EXT_ANDES)	+= andes.o
+obj-$(CONFIG_RISCV_ISA_VENDOR_EXT_MIPS)  	+= mips.o
+obj-$(CONFIG_RISCV_ISA_VENDOR_EXT_MIPS)  	+= mips_hwprobe.o
 obj-$(CONFIG_RISCV_ISA_VENDOR_EXT_SIFIVE)	+= sifive.o
 obj-$(CONFIG_RISCV_ISA_VENDOR_EXT_SIFIVE)	+= sifive_hwprobe.o
 obj-$(CONFIG_RISCV_ISA_VENDOR_EXT_THEAD)	+= thead.o
diff --git a/arch/riscv/kernel/vendor_extensions/mips.c b/arch/riscv/kernel/vendor_extensions/mips.c
new file mode 100644
index 000000000000..f691129f96c2
--- /dev/null
+++ b/arch/riscv/kernel/vendor_extensions/mips.c
@@ -0,0 +1,22 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2025 MIPS.
+ */
+
+#include <asm/cpufeature.h>
+#include <asm/vendor_extensions.h>
+#include <asm/vendor_extensions/mips.h>
+
+#include <linux/array_size.h>
+#include <linux/cpumask.h>
+#include <linux/types.h>
+
+/* All MIPS vendor extensions supported in Linux */
+static const struct riscv_isa_ext_data riscv_isa_vendor_ext_mips[] = {
+	__RISCV_ISA_EXT_DATA(xmipsexectl, RISCV_ISA_VENDOR_EXT_XMIPSEXECTL),
+};
+
+struct riscv_isa_vendor_ext_data_list riscv_isa_vendor_ext_list_mips = {
+	.ext_data_count = ARRAY_SIZE(riscv_isa_vendor_ext_mips),
+	.ext_data = riscv_isa_vendor_ext_mips,
+};
diff --git a/arch/riscv/kernel/vendor_extensions/mips_hwprobe.c b/arch/riscv/kernel/vendor_extensions/mips_hwprobe.c
new file mode 100644
index 000000000000..dc213a2ca70d
--- /dev/null
+++ b/arch/riscv/kernel/vendor_extensions/mips_hwprobe.c
@@ -0,0 +1,23 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2025 MIPS.
+ */
+
+#include <asm/vendor_extensions.h>
+#include <asm/vendor_extensions/mips.h>
+#include <asm/vendor_extensions/mips_hwprobe.h>
+#include <asm/vendor_extensions/vendor_hwprobe.h>
+
+#include <linux/cpumask.h>
+#include <linux/types.h>
+
+#include <uapi/asm/hwprobe.h>
+#include <uapi/asm/vendor/mips.h>
+
+void hwprobe_isa_vendor_ext_mips_0(struct riscv_hwprobe *pair,
+				   const struct cpumask *cpus)
+{
+	VENDOR_EXTENSION_SUPPORTED(pair, cpus,
+				   riscv_isa_vendor_ext_list_mips.per_hart_isa_bitmap,
+				   { VENDOR_EXT_KEY(XMIPSEXECTL); });
+}
diff --git a/arch/riscv/kvm/mmu.c b/arch/riscv/kvm/mmu.c
index a1c3b2ec1dde..525fb5a330c0 100644
--- a/arch/riscv/kvm/mmu.c
+++ b/arch/riscv/kvm/mmu.c
@@ -39,6 +39,7 @@ int kvm_riscv_mmu_ioremap(struct kvm *kvm, gpa_t gpa, phys_addr_t hpa,
 			  unsigned long size, bool writable, bool in_atomic)
 {
 	int ret = 0;
+	pgprot_t prot;
 	unsigned long pfn;
 	phys_addr_t addr, end;
 	struct kvm_mmu_memory_cache pcache = {
@@ -55,10 +56,12 @@ int kvm_riscv_mmu_ioremap(struct kvm *kvm, gpa_t gpa, phys_addr_t hpa,
 
 	end = (gpa + size + PAGE_SIZE - 1) & PAGE_MASK;
 	pfn = __phys_to_pfn(hpa);
+	prot = pgprot_noncached(PAGE_WRITE);
 
 	for (addr = gpa; addr < end; addr += PAGE_SIZE) {
 		map.addr = addr;
-		map.pte = pfn_pte(pfn, PAGE_KERNEL_IO);
+		map.pte = pfn_pte(pfn, prot);
+		map.pte = pte_mkdirty(map.pte);
 		map.level = 0;
 
 		if (!writable)
diff --git a/arch/riscv/kvm/vcpu.c b/arch/riscv/kvm/vcpu.c
index f001e56403f9..3ebcfffaa978 100644
--- a/arch/riscv/kvm/vcpu.c
+++ b/arch/riscv/kvm/vcpu.c
@@ -683,7 +683,7 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
 }
 
 /**
- * check_vcpu_requests - check and handle pending vCPU requests
+ * kvm_riscv_check_vcpu_requests - check and handle pending vCPU requests
  * @vcpu:	the VCPU pointer
  *
  * Return: 1 if we should enter the guest
diff --git a/arch/riscv/kvm/vcpu_insn.c b/arch/riscv/kvm/vcpu_insn.c
index 97dec18e6989..de1f96ea6225 100644
--- a/arch/riscv/kvm/vcpu_insn.c
+++ b/arch/riscv/kvm/vcpu_insn.c
@@ -8,133 +8,7 @@
 #include <linux/kvm_host.h>
 
 #include <asm/cpufeature.h>
-
-#define INSN_OPCODE_MASK	0x007c
-#define INSN_OPCODE_SHIFT	2
-#define INSN_OPCODE_SYSTEM	28
-
-#define INSN_MASK_WFI		0xffffffff
-#define INSN_MATCH_WFI		0x10500073
-
-#define INSN_MASK_WRS		0xffffffff
-#define INSN_MATCH_WRS		0x00d00073
-
-#define INSN_MATCH_CSRRW	0x1073
-#define INSN_MASK_CSRRW		0x707f
-#define INSN_MATCH_CSRRS	0x2073
-#define INSN_MASK_CSRRS		0x707f
-#define INSN_MATCH_CSRRC	0x3073
-#define INSN_MASK_CSRRC		0x707f
-#define INSN_MATCH_CSRRWI	0x5073
-#define INSN_MASK_CSRRWI	0x707f
-#define INSN_MATCH_CSRRSI	0x6073
-#define INSN_MASK_CSRRSI	0x707f
-#define INSN_MATCH_CSRRCI	0x7073
-#define INSN_MASK_CSRRCI	0x707f
-
-#define INSN_MATCH_LB		0x3
-#define INSN_MASK_LB		0x707f
-#define INSN_MATCH_LH		0x1003
-#define INSN_MASK_LH		0x707f
-#define INSN_MATCH_LW		0x2003
-#define INSN_MASK_LW		0x707f
-#define INSN_MATCH_LD		0x3003
-#define INSN_MASK_LD		0x707f
-#define INSN_MATCH_LBU		0x4003
-#define INSN_MASK_LBU		0x707f
-#define INSN_MATCH_LHU		0x5003
-#define INSN_MASK_LHU		0x707f
-#define INSN_MATCH_LWU		0x6003
-#define INSN_MASK_LWU		0x707f
-#define INSN_MATCH_SB		0x23
-#define INSN_MASK_SB		0x707f
-#define INSN_MATCH_SH		0x1023
-#define INSN_MASK_SH		0x707f
-#define INSN_MATCH_SW		0x2023
-#define INSN_MASK_SW		0x707f
-#define INSN_MATCH_SD		0x3023
-#define INSN_MASK_SD		0x707f
-
-#define INSN_MATCH_C_LD		0x6000
-#define INSN_MASK_C_LD		0xe003
-#define INSN_MATCH_C_SD		0xe000
-#define INSN_MASK_C_SD		0xe003
-#define INSN_MATCH_C_LW		0x4000
-#define INSN_MASK_C_LW		0xe003
-#define INSN_MATCH_C_SW		0xc000
-#define INSN_MASK_C_SW		0xe003
-#define INSN_MATCH_C_LDSP	0x6002
-#define INSN_MASK_C_LDSP	0xe003
-#define INSN_MATCH_C_SDSP	0xe002
-#define INSN_MASK_C_SDSP	0xe003
-#define INSN_MATCH_C_LWSP	0x4002
-#define INSN_MASK_C_LWSP	0xe003
-#define INSN_MATCH_C_SWSP	0xc002
-#define INSN_MASK_C_SWSP	0xe003
-
-#define INSN_16BIT_MASK		0x3
-
-#define INSN_IS_16BIT(insn)	(((insn) & INSN_16BIT_MASK) != INSN_16BIT_MASK)
-
-#define INSN_LEN(insn)		(INSN_IS_16BIT(insn) ? 2 : 4)
-
-#ifdef CONFIG_64BIT
-#define LOG_REGBYTES		3
-#else
-#define LOG_REGBYTES		2
-#endif
-#define REGBYTES		(1 << LOG_REGBYTES)
-
-#define SH_RD			7
-#define SH_RS1			15
-#define SH_RS2			20
-#define SH_RS2C			2
-#define MASK_RX			0x1f
-
-#define RV_X(x, s, n)		(((x) >> (s)) & ((1 << (n)) - 1))
-#define RVC_LW_IMM(x)		((RV_X(x, 6, 1) << 2) | \
-				 (RV_X(x, 10, 3) << 3) | \
-				 (RV_X(x, 5, 1) << 6))
-#define RVC_LD_IMM(x)		((RV_X(x, 10, 3) << 3) | \
-				 (RV_X(x, 5, 2) << 6))
-#define RVC_LWSP_IMM(x)		((RV_X(x, 4, 3) << 2) | \
-				 (RV_X(x, 12, 1) << 5) | \
-				 (RV_X(x, 2, 2) << 6))
-#define RVC_LDSP_IMM(x)		((RV_X(x, 5, 2) << 3) | \
-				 (RV_X(x, 12, 1) << 5) | \
-				 (RV_X(x, 2, 3) << 6))
-#define RVC_SWSP_IMM(x)		((RV_X(x, 9, 4) << 2) | \
-				 (RV_X(x, 7, 2) << 6))
-#define RVC_SDSP_IMM(x)		((RV_X(x, 10, 3) << 3) | \
-				 (RV_X(x, 7, 3) << 6))
-#define RVC_RS1S(insn)		(8 + RV_X(insn, SH_RD, 3))
-#define RVC_RS2S(insn)		(8 + RV_X(insn, SH_RS2C, 3))
-#define RVC_RS2(insn)		RV_X(insn, SH_RS2C, 5)
-
-#define SHIFT_RIGHT(x, y)		\
-	((y) < 0 ? ((x) << -(y)) : ((x) >> (y)))
-
-#define REG_MASK			\
-	((1 << (5 + LOG_REGBYTES)) - (1 << LOG_REGBYTES))
-
-#define REG_OFFSET(insn, pos)		\
-	(SHIFT_RIGHT((insn), (pos) - LOG_REGBYTES) & REG_MASK)
-
-#define REG_PTR(insn, pos, regs)	\
-	((ulong *)((ulong)(regs) + REG_OFFSET(insn, pos)))
-
-#define GET_FUNCT3(insn)	(((insn) >> 12) & 7)
-
-#define GET_RS1(insn, regs)	(*REG_PTR(insn, SH_RS1, regs))
-#define GET_RS2(insn, regs)	(*REG_PTR(insn, SH_RS2, regs))
-#define GET_RS1S(insn, regs)	(*REG_PTR(RVC_RS1S(insn), 0, regs))
-#define GET_RS2S(insn, regs)	(*REG_PTR(RVC_RS2S(insn), 0, regs))
-#define GET_RS2C(insn, regs)	(*REG_PTR(insn, SH_RS2C, regs))
-#define GET_SP(regs)		(*REG_PTR(2, 0, regs))
-#define SET_RD(insn, regs, val)	(*REG_PTR(insn, SH_RD, regs) = (val))
-#define IMM_I(insn)		((s32)(insn) >> 20)
-#define IMM_S(insn)		(((s32)(insn) >> 25 << 5) | \
-				 (s32)(((insn) >> 7) & 0x1f))
+#include <asm/insn.h>
 
 struct insn_func {
 	unsigned long mask;
diff --git a/arch/riscv/kvm/vcpu_vector.c b/arch/riscv/kvm/vcpu_vector.c
index a5f88cb717f3..05f3cc2d8e31 100644
--- a/arch/riscv/kvm/vcpu_vector.c
+++ b/arch/riscv/kvm/vcpu_vector.c
@@ -182,6 +182,8 @@ int kvm_riscv_vcpu_set_reg_vector(struct kvm_vcpu *vcpu,
 		struct kvm_cpu_context *cntx = &vcpu->arch.guest_context;
 		unsigned long reg_val;
 
+		if (reg_size != sizeof(reg_val))
+			return -EINVAL;
 		if (copy_from_user(&reg_val, uaddr, reg_size))
 			return -EFAULT;
 		if (reg_val != cntx->vector.vlenb)
diff --git a/arch/riscv/mm/init.c b/arch/riscv/mm/init.c
index 15683ae13fa5..6091f3f06fa3 100644
--- a/arch/riscv/mm/init.c
+++ b/arch/riscv/mm/init.c
@@ -23,6 +23,7 @@
 #include <linux/kfence.h>
 #include <linux/execmem.h>
 
+#include <asm/alternative.h>
 #include <asm/fixmap.h>
 #include <asm/io.h>
 #include <asm/kasan.h>
@@ -816,6 +817,7 @@ static __meminit pgprot_t pgprot_from_va(uintptr_t va)
 
 #if defined(CONFIG_64BIT) && !defined(CONFIG_XIP_KERNEL)
 u64 __pi_set_satp_mode_from_cmdline(uintptr_t dtb_pa);
+u64 __pi_set_satp_mode_from_fdt(uintptr_t dtb_pa);
 
 static void __init disable_pgtable_l5(void)
 {
@@ -855,18 +857,22 @@ static void __init set_mmap_rnd_bits_max(void)
  * underlying hardware: establish 1:1 mapping in 4-level page table mode
  * then read SATP to see if the configuration was taken into account
  * meaning sv48 is supported.
+ * The maximum SATP mode is limited by both the command line and the "mmu-type"
+ * property in the device tree, since some platforms may hang if an unsupported
+ * SATP mode is attempted.
  */
 static __init void set_satp_mode(uintptr_t dtb_pa)
 {
 	u64 identity_satp, hw_satp;
 	uintptr_t set_satp_mode_pmd = ((unsigned long)set_satp_mode) & PMD_MASK;
-	u64 satp_mode_cmdline = __pi_set_satp_mode_from_cmdline(dtb_pa);
+	u64 satp_mode_limit = min_not_zero(__pi_set_satp_mode_from_cmdline(dtb_pa),
+					   __pi_set_satp_mode_from_fdt(dtb_pa));
 
 	kernel_map.page_offset = PAGE_OFFSET_L5;
 
-	if (satp_mode_cmdline == SATP_MODE_57) {
+	if (satp_mode_limit == SATP_MODE_48) {
 		disable_pgtable_l5();
-	} else if (satp_mode_cmdline == SATP_MODE_48) {
+	} else if (satp_mode_limit == SATP_MODE_39) {
 		disable_pgtable_l5();
 		disable_pgtable_l4();
 		return;
diff --git a/arch/riscv/net/bpf_jit.h b/arch/riscv/net/bpf_jit.h
index e7b032dfd17f..632ced07bca4 100644
--- a/arch/riscv/net/bpf_jit.h
+++ b/arch/riscv/net/bpf_jit.h
@@ -13,21 +13,15 @@
 #include <linux/filter.h>
 #include <asm/cacheflush.h>
 
+/* verify runtime detection extension status */
+#define rv_ext_enabled(ext) \
+	(IS_ENABLED(CONFIG_RISCV_ISA_##ext) && riscv_has_extension_likely(RISCV_ISA_EXT_##ext))
+
 static inline bool rvc_enabled(void)
 {
 	return IS_ENABLED(CONFIG_RISCV_ISA_C);
 }
 
-static inline bool rvzba_enabled(void)
-{
-	return IS_ENABLED(CONFIG_RISCV_ISA_ZBA) && riscv_has_extension_likely(RISCV_ISA_EXT_ZBA);
-}
-
-static inline bool rvzbb_enabled(void)
-{
-	return IS_ENABLED(CONFIG_RISCV_ISA_ZBB) && riscv_has_extension_likely(RISCV_ISA_EXT_ZBB);
-}
-
 enum {
 	RV_REG_ZERO =	0,	/* The constant value 0 */
 	RV_REG_RA =	1,	/* Return address */
@@ -84,6 +78,8 @@ struct rv_jit_context {
 	int epilogue_offset;
 	int *offset;		/* BPF to RV */
 	int nexentries;
+	int ex_insn_off;
+	int ex_jmp_off;
 	unsigned long flags;
 	int stack_size;
 	u64 arena_vm_start;
@@ -757,6 +753,17 @@ static inline u16 rvc_swsp(u32 imm8, u8 rs2)
 	return rv_css_insn(0x6, imm, rs2, 0x2);
 }
 
+/* RVZACAS instructions. */
+static inline u32 rvzacas_amocas_w(u8 rd, u8 rs2, u8 rs1, u8 aq, u8 rl)
+{
+	return rv_amo_insn(0x5, aq, rl, rs2, rs1, 2, rd, 0x2f);
+}
+
+static inline u32 rvzacas_amocas_d(u8 rd, u8 rs2, u8 rs1, u8 aq, u8 rl)
+{
+	return rv_amo_insn(0x5, aq, rl, rs2, rs1, 3, rd, 0x2f);
+}
+
 /* RVZBA instructions. */
 static inline u32 rvzba_sh2add(u8 rd, u8 rs1, u8 rs2)
 {
@@ -1123,7 +1130,7 @@ static inline void emit_sw(u8 rs1, s32 off, u8 rs2, struct rv_jit_context *ctx)
 
 static inline void emit_sh2add(u8 rd, u8 rs1, u8 rs2, struct rv_jit_context *ctx)
 {
-	if (rvzba_enabled()) {
+	if (rv_ext_enabled(ZBA)) {
 		emit(rvzba_sh2add(rd, rs1, rs2), ctx);
 		return;
 	}
@@ -1134,7 +1141,7 @@ static inline void emit_sh2add(u8 rd, u8 rs1, u8 rs2, struct rv_jit_context *ctx
 
 static inline void emit_sh3add(u8 rd, u8 rs1, u8 rs2, struct rv_jit_context *ctx)
 {
-	if (rvzba_enabled()) {
+	if (rv_ext_enabled(ZBA)) {
 		emit(rvzba_sh3add(rd, rs1, rs2), ctx);
 		return;
 	}
@@ -1184,7 +1191,7 @@ static inline void emit_subw(u8 rd, u8 rs1, u8 rs2, struct rv_jit_context *ctx)
 
 static inline void emit_sextb(u8 rd, u8 rs, struct rv_jit_context *ctx)
 {
-	if (rvzbb_enabled()) {
+	if (rv_ext_enabled(ZBB)) {
 		emit(rvzbb_sextb(rd, rs), ctx);
 		return;
 	}
@@ -1195,7 +1202,7 @@ static inline void emit_sextb(u8 rd, u8 rs, struct rv_jit_context *ctx)
 
 static inline void emit_sexth(u8 rd, u8 rs, struct rv_jit_context *ctx)
 {
-	if (rvzbb_enabled()) {
+	if (rv_ext_enabled(ZBB)) {
 		emit(rvzbb_sexth(rd, rs), ctx);
 		return;
 	}
@@ -1211,7 +1218,7 @@ static inline void emit_sextw(u8 rd, u8 rs, struct rv_jit_context *ctx)
 
 static inline void emit_zexth(u8 rd, u8 rs, struct rv_jit_context *ctx)
 {
-	if (rvzbb_enabled()) {
+	if (rv_ext_enabled(ZBB)) {
 		emit(rvzbb_zexth(rd, rs), ctx);
 		return;
 	}
@@ -1222,7 +1229,7 @@ static inline void emit_zexth(u8 rd, u8 rs, struct rv_jit_context *ctx)
 
 static inline void emit_zextw(u8 rd, u8 rs, struct rv_jit_context *ctx)
 {
-	if (rvzba_enabled()) {
+	if (rv_ext_enabled(ZBA)) {
 		emit(rvzba_zextw(rd, rs), ctx);
 		return;
 	}
@@ -1233,7 +1240,7 @@ static inline void emit_zextw(u8 rd, u8 rs, struct rv_jit_context *ctx)
 
 static inline void emit_bswap(u8 rd, s32 imm, struct rv_jit_context *ctx)
 {
-	if (rvzbb_enabled()) {
+	if (rv_ext_enabled(ZBB)) {
 		int bits = 64 - imm;
 
 		emit(rvzbb_rev8(rd, rd), ctx);
@@ -1289,6 +1296,35 @@ out_be:
 	emit_mv(rd, RV_REG_T2, ctx);
 }
 
+static inline void emit_cmpxchg(u8 rd, u8 rs, u8 r0, bool is64, struct rv_jit_context *ctx)
+{
+	int jmp_offset;
+
+	if (rv_ext_enabled(ZACAS)) {
+		ctx->ex_insn_off = ctx->ninsns;
+		emit(is64 ? rvzacas_amocas_d(r0, rs, rd, 1, 1) :
+		     rvzacas_amocas_w(r0, rs, rd, 1, 1), ctx);
+		ctx->ex_jmp_off = ctx->ninsns;
+		if (!is64)
+			emit_zextw(r0, r0, ctx);
+		return;
+	}
+
+	if (is64)
+		emit_mv(RV_REG_T2, r0, ctx);
+	else
+		emit_addiw(RV_REG_T2, r0, 0, ctx);
+	emit(is64 ? rv_lr_d(r0, 0, rd, 0, 0) :
+	     rv_lr_w(r0, 0, rd, 0, 0), ctx);
+	jmp_offset = ninsns_rvoff(8);
+	emit(rv_bne(RV_REG_T2, r0, jmp_offset >> 1), ctx);
+	emit(is64 ? rv_sc_d(RV_REG_T3, rs, rd, 0, 1) :
+	     rv_sc_w(RV_REG_T3, rs, rd, 0, 1), ctx);
+	jmp_offset = ninsns_rvoff(-6);
+	emit(rv_bne(RV_REG_T3, 0, jmp_offset >> 1), ctx);
+	emit_fence_rw_rw(ctx);
+}
+
 #endif /* __riscv_xlen == 64 */
 
 void bpf_jit_build_prologue(struct rv_jit_context *ctx, bool is_subprog);
diff --git a/arch/riscv/net/bpf_jit_comp64.c b/arch/riscv/net/bpf_jit_comp64.c
index 10e01ff06312..45cbc7c6fe49 100644
--- a/arch/riscv/net/bpf_jit_comp64.c
+++ b/arch/riscv/net/bpf_jit_comp64.c
@@ -18,7 +18,7 @@
 #define RV_MAX_REG_ARGS 8
 #define RV_FENTRY_NINSNS 2
 #define RV_FENTRY_NBYTES (RV_FENTRY_NINSNS * 4)
-#define RV_KCFI_NINSNS (IS_ENABLED(CONFIG_CFI_CLANG) ? 1 : 0)
+#define RV_KCFI_NINSNS (IS_ENABLED(CONFIG_CFI) ? 1 : 0)
 /* imm that allows emit_imm to emit max count insns */
 #define RV_MAX_COUNT_IMM 0x7FFF7FF7FF7FF7FF
 
@@ -469,142 +469,96 @@ static int emit_call(u64 addr, bool fixed_addr, struct rv_jit_context *ctx)
 
 static inline void emit_kcfi(u32 hash, struct rv_jit_context *ctx)
 {
-	if (IS_ENABLED(CONFIG_CFI_CLANG))
+	if (IS_ENABLED(CONFIG_CFI))
 		emit(hash, ctx);
 }
 
-static int emit_load_8(bool sign_ext, u8 rd, s32 off, u8 rs, struct rv_jit_context *ctx)
+static void emit_ldx_insn(u8 rd, s16 off, u8 rs, u8 size, bool sign_ext,
+			  struct rv_jit_context *ctx)
 {
-	int insns_start;
-
-	if (is_12b_int(off)) {
-		insns_start = ctx->ninsns;
-		if (sign_ext)
-			emit(rv_lb(rd, off, rs), ctx);
-		else
-			emit(rv_lbu(rd, off, rs), ctx);
-		return ctx->ninsns - insns_start;
-	}
-
-	emit_imm(RV_REG_T1, off, ctx);
-	emit_add(RV_REG_T1, RV_REG_T1, rs, ctx);
-	insns_start = ctx->ninsns;
-	if (sign_ext)
-		emit(rv_lb(rd, 0, RV_REG_T1), ctx);
-	else
-		emit(rv_lbu(rd, 0, RV_REG_T1), ctx);
-	return ctx->ninsns - insns_start;
-}
-
-static int emit_load_16(bool sign_ext, u8 rd, s32 off, u8 rs, struct rv_jit_context *ctx)
-{
-	int insns_start;
-
-	if (is_12b_int(off)) {
-		insns_start = ctx->ninsns;
-		if (sign_ext)
-			emit(rv_lh(rd, off, rs), ctx);
-		else
-			emit(rv_lhu(rd, off, rs), ctx);
-		return ctx->ninsns - insns_start;
-	}
-
-	emit_imm(RV_REG_T1, off, ctx);
-	emit_add(RV_REG_T1, RV_REG_T1, rs, ctx);
-	insns_start = ctx->ninsns;
-	if (sign_ext)
-		emit(rv_lh(rd, 0, RV_REG_T1), ctx);
-	else
-		emit(rv_lhu(rd, 0, RV_REG_T1), ctx);
-	return ctx->ninsns - insns_start;
-}
-
-static int emit_load_32(bool sign_ext, u8 rd, s32 off, u8 rs, struct rv_jit_context *ctx)
-{
-	int insns_start;
-
-	if (is_12b_int(off)) {
-		insns_start = ctx->ninsns;
-		if (sign_ext)
-			emit(rv_lw(rd, off, rs), ctx);
-		else
-			emit(rv_lwu(rd, off, rs), ctx);
-		return ctx->ninsns - insns_start;
-	}
-
-	emit_imm(RV_REG_T1, off, ctx);
-	emit_add(RV_REG_T1, RV_REG_T1, rs, ctx);
-	insns_start = ctx->ninsns;
-	if (sign_ext)
-		emit(rv_lw(rd, 0, RV_REG_T1), ctx);
-	else
-		emit(rv_lwu(rd, 0, RV_REG_T1), ctx);
-	return ctx->ninsns - insns_start;
-}
-
-static int emit_load_64(bool sign_ext, u8 rd, s32 off, u8 rs, struct rv_jit_context *ctx)
-{
-	int insns_start;
-
-	if (is_12b_int(off)) {
-		insns_start = ctx->ninsns;
+	switch (size) {
+	case BPF_B:
+		emit(sign_ext ? rv_lb(rd, off, rs) : rv_lbu(rd, off, rs), ctx);
+		break;
+	case BPF_H:
+		emit(sign_ext ? rv_lh(rd, off, rs) : rv_lhu(rd, off, rs), ctx);
+		break;
+	case BPF_W:
+		emit(sign_ext ? rv_lw(rd, off, rs) : rv_lwu(rd, off, rs), ctx);
+		break;
+	case BPF_DW:
 		emit_ld(rd, off, rs, ctx);
-		return ctx->ninsns - insns_start;
+		break;
 	}
 
-	emit_imm(RV_REG_T1, off, ctx);
-	emit_add(RV_REG_T1, RV_REG_T1, rs, ctx);
-	insns_start = ctx->ninsns;
-	emit_ld(rd, 0, RV_REG_T1, ctx);
-	return ctx->ninsns - insns_start;
 }
 
-static void emit_store_8(u8 rd, s32 off, u8 rs, struct rv_jit_context *ctx)
+static void emit_stx_insn(u8 rd, s16 off, u8 rs, u8 size, struct rv_jit_context *ctx)
 {
-	if (is_12b_int(off)) {
+	switch (size) {
+	case BPF_B:
 		emit(rv_sb(rd, off, rs), ctx);
-		return;
+		break;
+	case BPF_H:
+		emit(rv_sh(rd, off, rs), ctx);
+		break;
+	case BPF_W:
+		emit_sw(rd, off, rs, ctx);
+		break;
+	case BPF_DW:
+		emit_sd(rd, off, rs, ctx);
+		break;
 	}
-
-	emit_imm(RV_REG_T1, off, ctx);
-	emit_add(RV_REG_T1, RV_REG_T1, rd, ctx);
-	emit(rv_sb(RV_REG_T1, 0, rs), ctx);
 }
 
-static void emit_store_16(u8 rd, s32 off, u8 rs, struct rv_jit_context *ctx)
+static void emit_ldx(u8 rd, s16 off, u8 rs, u8 size, bool sign_ext,
+		    struct rv_jit_context *ctx)
 {
 	if (is_12b_int(off)) {
-		emit(rv_sh(rd, off, rs), ctx);
+		ctx->ex_insn_off = ctx->ninsns;
+		emit_ldx_insn(rd, off, rs, size, sign_ext, ctx);
+		ctx->ex_jmp_off = ctx->ninsns;
 		return;
 	}
 
 	emit_imm(RV_REG_T1, off, ctx);
-	emit_add(RV_REG_T1, RV_REG_T1, rd, ctx);
-	emit(rv_sh(RV_REG_T1, 0, rs), ctx);
+	emit_add(RV_REG_T1, RV_REG_T1, rs, ctx);
+	ctx->ex_insn_off = ctx->ninsns;
+	emit_ldx_insn(rd, 0, RV_REG_T1, size, sign_ext, ctx);
+	ctx->ex_jmp_off = ctx->ninsns;
 }
 
-static void emit_store_32(u8 rd, s32 off, u8 rs, struct rv_jit_context *ctx)
+static void emit_st(u8 rd, s16 off, s32 imm, u8 size, struct rv_jit_context *ctx)
 {
+	emit_imm(RV_REG_T1, imm, ctx);
 	if (is_12b_int(off)) {
-		emit_sw(rd, off, rs, ctx);
+		ctx->ex_insn_off = ctx->ninsns;
+		emit_stx_insn(rd, off, RV_REG_T1, size, ctx);
+		ctx->ex_jmp_off = ctx->ninsns;
 		return;
 	}
 
-	emit_imm(RV_REG_T1, off, ctx);
-	emit_add(RV_REG_T1, RV_REG_T1, rd, ctx);
-	emit_sw(RV_REG_T1, 0, rs, ctx);
+	emit_imm(RV_REG_T2, off, ctx);
+	emit_add(RV_REG_T2, RV_REG_T2, rd, ctx);
+	ctx->ex_insn_off = ctx->ninsns;
+	emit_stx_insn(RV_REG_T2, 0, RV_REG_T1, size, ctx);
+	ctx->ex_jmp_off = ctx->ninsns;
 }
 
-static void emit_store_64(u8 rd, s32 off, u8 rs, struct rv_jit_context *ctx)
+static void emit_stx(u8 rd, s16 off, u8 rs, u8 size, struct rv_jit_context *ctx)
 {
 	if (is_12b_int(off)) {
-		emit_sd(rd, off, rs, ctx);
+		ctx->ex_insn_off = ctx->ninsns;
+		emit_stx_insn(rd, off, rs, size, ctx);
+		ctx->ex_jmp_off = ctx->ninsns;
 		return;
 	}
 
 	emit_imm(RV_REG_T1, off, ctx);
 	emit_add(RV_REG_T1, RV_REG_T1, rd, ctx);
-	emit_sd(RV_REG_T1, 0, rs, ctx);
+	ctx->ex_insn_off = ctx->ninsns;
+	emit_stx_insn(RV_REG_T1, 0, rs, size, ctx);
+	ctx->ex_jmp_off = ctx->ninsns;
 }
 
 static int emit_atomic_ld_st(u8 rd, u8 rs, const struct bpf_insn *insn,
@@ -617,20 +571,12 @@ static int emit_atomic_ld_st(u8 rd, u8 rs, const struct bpf_insn *insn,
 	switch (imm) {
 	/* dst_reg = load_acquire(src_reg + off16) */
 	case BPF_LOAD_ACQ:
-		switch (BPF_SIZE(code)) {
-		case BPF_B:
-			emit_load_8(false, rd, off, rs, ctx);
-			break;
-		case BPF_H:
-			emit_load_16(false, rd, off, rs, ctx);
-			break;
-		case BPF_W:
-			emit_load_32(false, rd, off, rs, ctx);
-			break;
-		case BPF_DW:
-			emit_load_64(false, rd, off, rs, ctx);
-			break;
+		if (BPF_MODE(code) == BPF_PROBE_ATOMIC) {
+			emit_add(RV_REG_T2, rs, RV_REG_ARENA, ctx);
+			rs = RV_REG_T2;
 		}
+
+		emit_ldx(rd, off, rs, BPF_SIZE(code), false, ctx);
 		emit_fence_r_rw(ctx);
 
 		/* If our next insn is a redundant zext, return 1 to tell
@@ -641,21 +587,13 @@ static int emit_atomic_ld_st(u8 rd, u8 rs, const struct bpf_insn *insn,
 		break;
 	/* store_release(dst_reg + off16, src_reg) */
 	case BPF_STORE_REL:
-		emit_fence_rw_w(ctx);
-		switch (BPF_SIZE(code)) {
-		case BPF_B:
-			emit_store_8(rd, off, rs, ctx);
-			break;
-		case BPF_H:
-			emit_store_16(rd, off, rs, ctx);
-			break;
-		case BPF_W:
-			emit_store_32(rd, off, rs, ctx);
-			break;
-		case BPF_DW:
-			emit_store_64(rd, off, rs, ctx);
-			break;
+		if (BPF_MODE(code) == BPF_PROBE_ATOMIC) {
+			emit_add(RV_REG_T2, rd, RV_REG_ARENA, ctx);
+			rd = RV_REG_T2;
 		}
+
+		emit_fence_rw_w(ctx);
+		emit_stx(rd, off, rs, BPF_SIZE(code), ctx);
 		break;
 	default:
 		pr_err_once("bpf-jit: invalid atomic load/store opcode %02x\n", imm);
@@ -668,17 +606,15 @@ static int emit_atomic_ld_st(u8 rd, u8 rs, const struct bpf_insn *insn,
 static int emit_atomic_rmw(u8 rd, u8 rs, const struct bpf_insn *insn,
 			   struct rv_jit_context *ctx)
 {
-	u8 r0, code = insn->code;
+	u8 code = insn->code;
 	s16 off = insn->off;
 	s32 imm = insn->imm;
-	int jmp_offset;
-	bool is64;
+	bool is64 = BPF_SIZE(code) == BPF_DW;
 
 	if (BPF_SIZE(code) != BPF_W && BPF_SIZE(code) != BPF_DW) {
 		pr_err_once("bpf-jit: 1- and 2-byte RMW atomics are not supported\n");
 		return -EINVAL;
 	}
-	is64 = BPF_SIZE(code) == BPF_DW;
 
 	if (off) {
 		if (is_12b_int(off)) {
@@ -690,72 +626,82 @@ static int emit_atomic_rmw(u8 rd, u8 rs, const struct bpf_insn *insn,
 		rd = RV_REG_T1;
 	}
 
+	if (BPF_MODE(code) == BPF_PROBE_ATOMIC) {
+		emit_add(RV_REG_T1, rd, RV_REG_ARENA, ctx);
+		rd = RV_REG_T1;
+	}
+
 	switch (imm) {
 	/* lock *(u32/u64 *)(dst_reg + off16) <op>= src_reg */
 	case BPF_ADD:
+		ctx->ex_insn_off = ctx->ninsns;
 		emit(is64 ? rv_amoadd_d(RV_REG_ZERO, rs, rd, 0, 0) :
 		     rv_amoadd_w(RV_REG_ZERO, rs, rd, 0, 0), ctx);
+		ctx->ex_jmp_off = ctx->ninsns;
 		break;
 	case BPF_AND:
+		ctx->ex_insn_off = ctx->ninsns;
 		emit(is64 ? rv_amoand_d(RV_REG_ZERO, rs, rd, 0, 0) :
 		     rv_amoand_w(RV_REG_ZERO, rs, rd, 0, 0), ctx);
+		ctx->ex_jmp_off = ctx->ninsns;
 		break;
 	case BPF_OR:
+		ctx->ex_insn_off = ctx->ninsns;
 		emit(is64 ? rv_amoor_d(RV_REG_ZERO, rs, rd, 0, 0) :
 		     rv_amoor_w(RV_REG_ZERO, rs, rd, 0, 0), ctx);
+		ctx->ex_jmp_off = ctx->ninsns;
 		break;
 	case BPF_XOR:
+		ctx->ex_insn_off = ctx->ninsns;
 		emit(is64 ? rv_amoxor_d(RV_REG_ZERO, rs, rd, 0, 0) :
 		     rv_amoxor_w(RV_REG_ZERO, rs, rd, 0, 0), ctx);
+		ctx->ex_jmp_off = ctx->ninsns;
 		break;
 	/* src_reg = atomic_fetch_<op>(dst_reg + off16, src_reg) */
 	case BPF_ADD | BPF_FETCH:
+		ctx->ex_insn_off = ctx->ninsns;
 		emit(is64 ? rv_amoadd_d(rs, rs, rd, 1, 1) :
 		     rv_amoadd_w(rs, rs, rd, 1, 1), ctx);
+		ctx->ex_jmp_off = ctx->ninsns;
 		if (!is64)
 			emit_zextw(rs, rs, ctx);
 		break;
 	case BPF_AND | BPF_FETCH:
+		ctx->ex_insn_off = ctx->ninsns;
 		emit(is64 ? rv_amoand_d(rs, rs, rd, 1, 1) :
 		     rv_amoand_w(rs, rs, rd, 1, 1), ctx);
+		ctx->ex_jmp_off = ctx->ninsns;
 		if (!is64)
 			emit_zextw(rs, rs, ctx);
 		break;
 	case BPF_OR | BPF_FETCH:
+		ctx->ex_insn_off = ctx->ninsns;
 		emit(is64 ? rv_amoor_d(rs, rs, rd, 1, 1) :
 		     rv_amoor_w(rs, rs, rd, 1, 1), ctx);
+		ctx->ex_jmp_off = ctx->ninsns;
 		if (!is64)
 			emit_zextw(rs, rs, ctx);
 		break;
 	case BPF_XOR | BPF_FETCH:
+		ctx->ex_insn_off = ctx->ninsns;
 		emit(is64 ? rv_amoxor_d(rs, rs, rd, 1, 1) :
 		     rv_amoxor_w(rs, rs, rd, 1, 1), ctx);
+		ctx->ex_jmp_off = ctx->ninsns;
 		if (!is64)
 			emit_zextw(rs, rs, ctx);
 		break;
 	/* src_reg = atomic_xchg(dst_reg + off16, src_reg); */
 	case BPF_XCHG:
+		ctx->ex_insn_off = ctx->ninsns;
 		emit(is64 ? rv_amoswap_d(rs, rs, rd, 1, 1) :
 		     rv_amoswap_w(rs, rs, rd, 1, 1), ctx);
+		ctx->ex_jmp_off = ctx->ninsns;
 		if (!is64)
 			emit_zextw(rs, rs, ctx);
 		break;
 	/* r0 = atomic_cmpxchg(dst_reg + off16, r0, src_reg); */
 	case BPF_CMPXCHG:
-		r0 = bpf_to_rv_reg(BPF_REG_0, ctx);
-		if (is64)
-			emit_mv(RV_REG_T2, r0, ctx);
-		else
-			emit_addiw(RV_REG_T2, r0, 0, ctx);
-		emit(is64 ? rv_lr_d(r0, 0, rd, 0, 0) :
-		     rv_lr_w(r0, 0, rd, 0, 0), ctx);
-		jmp_offset = ninsns_rvoff(8);
-		emit(rv_bne(RV_REG_T2, r0, jmp_offset >> 1), ctx);
-		emit(is64 ? rv_sc_d(RV_REG_T3, rs, rd, 0, 1) :
-		     rv_sc_w(RV_REG_T3, rs, rd, 0, 1), ctx);
-		jmp_offset = ninsns_rvoff(-6);
-		emit(rv_bne(RV_REG_T3, 0, jmp_offset >> 1), ctx);
-		emit_fence_rw_rw(ctx);
+		emit_cmpxchg(rd, rs, regmap[BPF_REG_0], is64, ctx);
 		break;
 	default:
 		pr_err_once("bpf-jit: invalid atomic RMW opcode %02x\n", imm);
@@ -765,6 +711,39 @@ static int emit_atomic_rmw(u8 rd, u8 rs, const struct bpf_insn *insn,
 	return 0;
 }
 
+/*
+ * Sign-extend the register if necessary
+ */
+static int sign_extend(u8 rd, u8 rs, u8 sz, bool sign, struct rv_jit_context *ctx)
+{
+	if (!sign && (sz == 1 || sz == 2)) {
+		if (rd != rs)
+			emit_mv(rd, rs, ctx);
+		return 0;
+	}
+
+	switch (sz) {
+	case 1:
+		emit_sextb(rd, rs, ctx);
+		break;
+	case 2:
+		emit_sexth(rd, rs, ctx);
+		break;
+	case 4:
+		emit_sextw(rd, rs, ctx);
+		break;
+	case 8:
+		if (rd != rs)
+			emit_mv(rd, rs, ctx);
+		break;
+	default:
+		pr_err("bpf-jit: invalid size %d for sign_extend\n", sz);
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
 #define BPF_FIXUP_OFFSET_MASK   GENMASK(26, 0)
 #define BPF_FIXUP_REG_MASK      GENMASK(31, 27)
 #define REG_DONT_CLEAR_MARKER	0	/* RV_REG_ZERO unused in pt_regmap */
@@ -783,9 +762,8 @@ bool ex_handler_bpf(const struct exception_table_entry *ex,
 }
 
 /* For accesses to BTF pointers, add an entry to the exception table */
-static int add_exception_handler(const struct bpf_insn *insn,
-				 struct rv_jit_context *ctx,
-				 int dst_reg, int insn_len)
+static int add_exception_handler(const struct bpf_insn *insn, int dst_reg,
+				 struct rv_jit_context *ctx)
 {
 	struct exception_table_entry *ex;
 	unsigned long pc;
@@ -793,21 +771,23 @@ static int add_exception_handler(const struct bpf_insn *insn,
 	off_t fixup_offset;
 
 	if (!ctx->insns || !ctx->ro_insns || !ctx->prog->aux->extable ||
-	    (BPF_MODE(insn->code) != BPF_PROBE_MEM && BPF_MODE(insn->code) != BPF_PROBE_MEMSX &&
-	     BPF_MODE(insn->code) != BPF_PROBE_MEM32))
+	    ctx->ex_insn_off <= 0 || ctx->ex_jmp_off <= 0)
 		return 0;
 
-	if (WARN_ON_ONCE(ctx->nexentries >= ctx->prog->aux->num_exentries))
-		return -EINVAL;
+	if (BPF_MODE(insn->code) != BPF_PROBE_MEM &&
+	    BPF_MODE(insn->code) != BPF_PROBE_MEMSX &&
+	    BPF_MODE(insn->code) != BPF_PROBE_MEM32 &&
+	    BPF_MODE(insn->code) != BPF_PROBE_ATOMIC)
+		return 0;
 
-	if (WARN_ON_ONCE(insn_len > ctx->ninsns))
+	if (WARN_ON_ONCE(ctx->nexentries >= ctx->prog->aux->num_exentries))
 		return -EINVAL;
 
-	if (WARN_ON_ONCE(!rvc_enabled() && insn_len == 1))
+	if (WARN_ON_ONCE(ctx->ex_insn_off > ctx->ninsns || ctx->ex_jmp_off > ctx->ninsns))
 		return -EINVAL;
 
 	ex = &ctx->prog->aux->extable[ctx->nexentries];
-	pc = (unsigned long)&ctx->ro_insns[ctx->ninsns - insn_len];
+	pc = (unsigned long)&ctx->ro_insns[ctx->ex_insn_off];
 
 	/*
 	 * This is the relative offset of the instruction that may fault from
@@ -831,7 +811,7 @@ static int add_exception_handler(const struct bpf_insn *insn,
 	 * that may fault. The execution will jump to this after handling the
 	 * fault.
 	 */
-	fixup_offset = (long)&ex->fixup - (pc + insn_len * sizeof(u16));
+	fixup_offset = (long)&ex->fixup - (long)&ctx->ro_insns[ctx->ex_jmp_off];
 	if (!FIELD_FIT(BPF_FIXUP_OFFSET_MASK, fixup_offset))
 		return -ERANGE;
 
@@ -848,6 +828,8 @@ static int add_exception_handler(const struct bpf_insn *insn,
 		FIELD_PREP(BPF_FIXUP_REG_MASK, dst_reg);
 	ex->type = EX_TYPE_BPF;
 
+	ctx->ex_insn_off = 0;
+	ctx->ex_jmp_off = 0;
 	ctx->nexentries++;
 	return 0;
 }
@@ -1079,10 +1061,9 @@ static int __arch_prepare_bpf_trampoline(struct bpf_tramp_image *im,
 	stack_size += 16;
 
 	save_ret = flags & (BPF_TRAMP_F_CALL_ORIG | BPF_TRAMP_F_RET_FENTRY_RET);
-	if (save_ret) {
+	if (save_ret)
 		stack_size += 16; /* Save both A5 (BPF R0) and A0 */
-		retval_off = stack_size;
-	}
+	retval_off = stack_size;
 
 	stack_size += nr_arg_slots * 8;
 	args_off = stack_size;
@@ -1226,8 +1207,15 @@ static int __arch_prepare_bpf_trampoline(struct bpf_tramp_image *im,
 		restore_args(min_t(int, nr_arg_slots, RV_MAX_REG_ARGS), args_off, ctx);
 
 	if (save_ret) {
-		emit_ld(RV_REG_A0, -retval_off, RV_REG_FP, ctx);
 		emit_ld(regmap[BPF_REG_0], -(retval_off - 8), RV_REG_FP, ctx);
+		if (is_struct_ops) {
+			ret = sign_extend(RV_REG_A0, regmap[BPF_REG_0], m->ret_size,
+					  m->ret_flags & BTF_FMODEL_SIGNED_ARG, ctx);
+			if (ret)
+				goto out;
+		} else {
+			emit_ld(RV_REG_A0, -retval_off, RV_REG_FP, ctx);
+		}
 	}
 
 	emit_ld(RV_REG_S1, -sreg_off, RV_REG_FP, ctx);
@@ -1320,7 +1308,6 @@ int arch_prepare_bpf_trampoline(struct bpf_tramp_image *im, void *ro_image,
 		goto out;
 	}
 
-	bpf_flush_icache(ro_image, ro_image_end);
 out:
 	kvfree(image);
 	return ret < 0 ? ret : size;
@@ -1356,7 +1343,7 @@ int bpf_jit_emit_insn(const struct bpf_insn *insn, struct rv_jit_context *ctx,
 				emit_mv(rd, rs, ctx);
 #ifdef CONFIG_SMP
 			/* Load current CPU number in T1 */
-			emit_ld(RV_REG_T1, offsetof(struct thread_info, cpu),
+			emit_lw(RV_REG_T1, offsetof(struct thread_info, cpu),
 				RV_REG_TP, ctx);
 			/* Load address of __per_cpu_offset array in T2 */
 			emit_addr(RV_REG_T2, (u64)&__per_cpu_offset, extra_pass, ctx);
@@ -1763,7 +1750,7 @@ int bpf_jit_emit_insn(const struct bpf_insn *insn, struct rv_jit_context *ctx,
 		 */
 		if (insn->src_reg == 0 && insn->imm == BPF_FUNC_get_smp_processor_id) {
 			/* Load current CPU number in R0 */
-			emit_ld(bpf_to_rv_reg(BPF_REG_0, ctx), offsetof(struct thread_info, cpu),
+			emit_lw(bpf_to_rv_reg(BPF_REG_0, ctx), offsetof(struct thread_info, cpu),
 				RV_REG_TP, ctx);
 			break;
 		}
@@ -1857,7 +1844,6 @@ int bpf_jit_emit_insn(const struct bpf_insn *insn, struct rv_jit_context *ctx,
 	case BPF_LDX | BPF_PROBE_MEM32 | BPF_DW:
 	{
 		bool sign_ext;
-		int insn_len;
 
 		sign_ext = BPF_MODE(insn->code) == BPF_MEMSX ||
 			   BPF_MODE(insn->code) == BPF_PROBE_MEMSX;
@@ -1867,22 +1853,9 @@ int bpf_jit_emit_insn(const struct bpf_insn *insn, struct rv_jit_context *ctx,
 			rs = RV_REG_T2;
 		}
 
-		switch (BPF_SIZE(code)) {
-		case BPF_B:
-			insn_len = emit_load_8(sign_ext, rd, off, rs, ctx);
-			break;
-		case BPF_H:
-			insn_len = emit_load_16(sign_ext, rd, off, rs, ctx);
-			break;
-		case BPF_W:
-			insn_len = emit_load_32(sign_ext, rd, off, rs, ctx);
-			break;
-		case BPF_DW:
-			insn_len = emit_load_64(sign_ext, rd, off, rs, ctx);
-			break;
-		}
+		emit_ldx(rd, off, rs, BPF_SIZE(code), sign_ext, ctx);
 
-		ret = add_exception_handler(insn, ctx, rd, insn_len);
+		ret = add_exception_handler(insn, rd, ctx);
 		if (ret)
 			return ret;
 
@@ -1890,238 +1863,73 @@ int bpf_jit_emit_insn(const struct bpf_insn *insn, struct rv_jit_context *ctx,
 			return 1;
 		break;
 	}
+
 	/* speculation barrier */
 	case BPF_ST | BPF_NOSPEC:
 		break;
 
 	/* ST: *(size *)(dst + off) = imm */
 	case BPF_ST | BPF_MEM | BPF_B:
-		emit_imm(RV_REG_T1, imm, ctx);
-		if (is_12b_int(off)) {
-			emit(rv_sb(rd, off, RV_REG_T1), ctx);
-			break;
-		}
-
-		emit_imm(RV_REG_T2, off, ctx);
-		emit_add(RV_REG_T2, RV_REG_T2, rd, ctx);
-		emit(rv_sb(RV_REG_T2, 0, RV_REG_T1), ctx);
-		break;
-
 	case BPF_ST | BPF_MEM | BPF_H:
-		emit_imm(RV_REG_T1, imm, ctx);
-		if (is_12b_int(off)) {
-			emit(rv_sh(rd, off, RV_REG_T1), ctx);
-			break;
-		}
-
-		emit_imm(RV_REG_T2, off, ctx);
-		emit_add(RV_REG_T2, RV_REG_T2, rd, ctx);
-		emit(rv_sh(RV_REG_T2, 0, RV_REG_T1), ctx);
-		break;
 	case BPF_ST | BPF_MEM | BPF_W:
-		emit_imm(RV_REG_T1, imm, ctx);
-		if (is_12b_int(off)) {
-			emit_sw(rd, off, RV_REG_T1, ctx);
-			break;
-		}
-
-		emit_imm(RV_REG_T2, off, ctx);
-		emit_add(RV_REG_T2, RV_REG_T2, rd, ctx);
-		emit_sw(RV_REG_T2, 0, RV_REG_T1, ctx);
-		break;
 	case BPF_ST | BPF_MEM | BPF_DW:
-		emit_imm(RV_REG_T1, imm, ctx);
-		if (is_12b_int(off)) {
-			emit_sd(rd, off, RV_REG_T1, ctx);
-			break;
-		}
-
-		emit_imm(RV_REG_T2, off, ctx);
-		emit_add(RV_REG_T2, RV_REG_T2, rd, ctx);
-		emit_sd(RV_REG_T2, 0, RV_REG_T1, ctx);
-		break;
-
+	/* ST | PROBE_MEM32: *(size *)(dst + RV_REG_ARENA + off) = imm */
 	case BPF_ST | BPF_PROBE_MEM32 | BPF_B:
 	case BPF_ST | BPF_PROBE_MEM32 | BPF_H:
 	case BPF_ST | BPF_PROBE_MEM32 | BPF_W:
 	case BPF_ST | BPF_PROBE_MEM32 | BPF_DW:
-	{
-		int insn_len, insns_start;
-
-		emit_add(RV_REG_T3, rd, RV_REG_ARENA, ctx);
-		rd = RV_REG_T3;
-
-		/* Load imm to a register then store it */
-		emit_imm(RV_REG_T1, imm, ctx);
-
-		switch (BPF_SIZE(code)) {
-		case BPF_B:
-			if (is_12b_int(off)) {
-				insns_start = ctx->ninsns;
-				emit(rv_sb(rd, off, RV_REG_T1), ctx);
-				insn_len = ctx->ninsns - insns_start;
-				break;
-			}
-
-			emit_imm(RV_REG_T2, off, ctx);
-			emit_add(RV_REG_T2, RV_REG_T2, rd, ctx);
-			insns_start = ctx->ninsns;
-			emit(rv_sb(RV_REG_T2, 0, RV_REG_T1), ctx);
-			insn_len = ctx->ninsns - insns_start;
-			break;
-		case BPF_H:
-			if (is_12b_int(off)) {
-				insns_start = ctx->ninsns;
-				emit(rv_sh(rd, off, RV_REG_T1), ctx);
-				insn_len = ctx->ninsns - insns_start;
-				break;
-			}
-
-			emit_imm(RV_REG_T2, off, ctx);
-			emit_add(RV_REG_T2, RV_REG_T2, rd, ctx);
-			insns_start = ctx->ninsns;
-			emit(rv_sh(RV_REG_T2, 0, RV_REG_T1), ctx);
-			insn_len = ctx->ninsns - insns_start;
-			break;
-		case BPF_W:
-			if (is_12b_int(off)) {
-				insns_start = ctx->ninsns;
-				emit_sw(rd, off, RV_REG_T1, ctx);
-				insn_len = ctx->ninsns - insns_start;
-				break;
-			}
-
-			emit_imm(RV_REG_T2, off, ctx);
-			emit_add(RV_REG_T2, RV_REG_T2, rd, ctx);
-			insns_start = ctx->ninsns;
-			emit_sw(RV_REG_T2, 0, RV_REG_T1, ctx);
-			insn_len = ctx->ninsns - insns_start;
-			break;
-		case BPF_DW:
-			if (is_12b_int(off)) {
-				insns_start = ctx->ninsns;
-				emit_sd(rd, off, RV_REG_T1, ctx);
-				insn_len = ctx->ninsns - insns_start;
-				break;
-			}
-
-			emit_imm(RV_REG_T2, off, ctx);
-			emit_add(RV_REG_T2, RV_REG_T2, rd, ctx);
-			insns_start = ctx->ninsns;
-			emit_sd(RV_REG_T2, 0, RV_REG_T1, ctx);
-			insn_len = ctx->ninsns - insns_start;
-			break;
+		if (BPF_MODE(insn->code) == BPF_PROBE_MEM32) {
+			emit_add(RV_REG_T3, rd, RV_REG_ARENA, ctx);
+			rd = RV_REG_T3;
 		}
 
-		ret = add_exception_handler(insn, ctx, REG_DONT_CLEAR_MARKER,
-					    insn_len);
+		emit_st(rd, off, imm, BPF_SIZE(code), ctx);
+
+		ret = add_exception_handler(insn, REG_DONT_CLEAR_MARKER, ctx);
 		if (ret)
 			return ret;
-
 		break;
-	}
 
 	/* STX: *(size *)(dst + off) = src */
 	case BPF_STX | BPF_MEM | BPF_B:
-		emit_store_8(rd, off, rs, ctx);
-		break;
 	case BPF_STX | BPF_MEM | BPF_H:
-		emit_store_16(rd, off, rs, ctx);
-		break;
 	case BPF_STX | BPF_MEM | BPF_W:
-		emit_store_32(rd, off, rs, ctx);
-		break;
 	case BPF_STX | BPF_MEM | BPF_DW:
-		emit_store_64(rd, off, rs, ctx);
+	/* STX | PROBE_MEM32: *(size *)(dst + RV_REG_ARENA + off) = src */
+	case BPF_STX | BPF_PROBE_MEM32 | BPF_B:
+	case BPF_STX | BPF_PROBE_MEM32 | BPF_H:
+	case BPF_STX | BPF_PROBE_MEM32 | BPF_W:
+	case BPF_STX | BPF_PROBE_MEM32 | BPF_DW:
+		if (BPF_MODE(insn->code) == BPF_PROBE_MEM32) {
+			emit_add(RV_REG_T2, rd, RV_REG_ARENA, ctx);
+			rd = RV_REG_T2;
+		}
+
+		emit_stx(rd, off, rs, BPF_SIZE(code), ctx);
+
+		ret = add_exception_handler(insn, REG_DONT_CLEAR_MARKER, ctx);
+		if (ret)
+			return ret;
 		break;
+
+	/* Atomics */
 	case BPF_STX | BPF_ATOMIC | BPF_B:
 	case BPF_STX | BPF_ATOMIC | BPF_H:
 	case BPF_STX | BPF_ATOMIC | BPF_W:
 	case BPF_STX | BPF_ATOMIC | BPF_DW:
+	case BPF_STX | BPF_PROBE_ATOMIC | BPF_B:
+	case BPF_STX | BPF_PROBE_ATOMIC | BPF_H:
+	case BPF_STX | BPF_PROBE_ATOMIC | BPF_W:
+	case BPF_STX | BPF_PROBE_ATOMIC | BPF_DW:
 		if (bpf_atomic_is_load_store(insn))
 			ret = emit_atomic_ld_st(rd, rs, insn, ctx);
 		else
 			ret = emit_atomic_rmw(rd, rs, insn, ctx);
-		if (ret)
-			return ret;
-		break;
 
-	case BPF_STX | BPF_PROBE_MEM32 | BPF_B:
-	case BPF_STX | BPF_PROBE_MEM32 | BPF_H:
-	case BPF_STX | BPF_PROBE_MEM32 | BPF_W:
-	case BPF_STX | BPF_PROBE_MEM32 | BPF_DW:
-	{
-		int insn_len, insns_start;
-
-		emit_add(RV_REG_T2, rd, RV_REG_ARENA, ctx);
-		rd = RV_REG_T2;
-
-		switch (BPF_SIZE(code)) {
-		case BPF_B:
-			if (is_12b_int(off)) {
-				insns_start = ctx->ninsns;
-				emit(rv_sb(rd, off, rs), ctx);
-				insn_len = ctx->ninsns - insns_start;
-				break;
-			}
-
-			emit_imm(RV_REG_T1, off, ctx);
-			emit_add(RV_REG_T1, RV_REG_T1, rd, ctx);
-			insns_start = ctx->ninsns;
-			emit(rv_sb(RV_REG_T1, 0, rs), ctx);
-			insn_len = ctx->ninsns - insns_start;
-			break;
-		case BPF_H:
-			if (is_12b_int(off)) {
-				insns_start = ctx->ninsns;
-				emit(rv_sh(rd, off, rs), ctx);
-				insn_len = ctx->ninsns - insns_start;
-				break;
-			}
-
-			emit_imm(RV_REG_T1, off, ctx);
-			emit_add(RV_REG_T1, RV_REG_T1, rd, ctx);
-			insns_start = ctx->ninsns;
-			emit(rv_sh(RV_REG_T1, 0, rs), ctx);
-			insn_len = ctx->ninsns - insns_start;
-			break;
-		case BPF_W:
-			if (is_12b_int(off)) {
-				insns_start = ctx->ninsns;
-				emit_sw(rd, off, rs, ctx);
-				insn_len = ctx->ninsns - insns_start;
-				break;
-			}
-
-			emit_imm(RV_REG_T1, off, ctx);
-			emit_add(RV_REG_T1, RV_REG_T1, rd, ctx);
-			insns_start = ctx->ninsns;
-			emit_sw(RV_REG_T1, 0, rs, ctx);
-			insn_len = ctx->ninsns - insns_start;
-			break;
-		case BPF_DW:
-			if (is_12b_int(off)) {
-				insns_start = ctx->ninsns;
-				emit_sd(rd, off, rs, ctx);
-				insn_len = ctx->ninsns - insns_start;
-				break;
-			}
-
-			emit_imm(RV_REG_T1, off, ctx);
-			emit_add(RV_REG_T1, RV_REG_T1, rd, ctx);
-			insns_start = ctx->ninsns;
-			emit_sd(RV_REG_T1, 0, rs, ctx);
-			insn_len = ctx->ninsns - insns_start;
-			break;
-		}
-
-		ret = add_exception_handler(insn, ctx, REG_DONT_CLEAR_MARKER,
-					    insn_len);
+		ret = ret ?: add_exception_handler(insn, REG_DONT_CLEAR_MARKER, ctx);
 		if (ret)
 			return ret;
-
 		break;
-	}
 
 	default:
 		pr_err("bpf-jit: unknown opcode %02x\n", code);
@@ -2249,6 +2057,25 @@ bool bpf_jit_supports_arena(void)
 	return true;
 }
 
+bool bpf_jit_supports_insn(struct bpf_insn *insn, bool in_arena)
+{
+	if (in_arena) {
+		switch (insn->code) {
+		case BPF_STX | BPF_ATOMIC | BPF_W:
+		case BPF_STX | BPF_ATOMIC | BPF_DW:
+			if (insn->imm == BPF_CMPXCHG)
+				return rv_ext_enabled(ZACAS);
+			break;
+		case BPF_LDX | BPF_MEMSX | BPF_B:
+		case BPF_LDX | BPF_MEMSX | BPF_H:
+		case BPF_LDX | BPF_MEMSX | BPF_W:
+			return false;
+		}
+	}
+
+	return true;
+}
+
 bool bpf_jit_supports_percpu_insn(void)
 {
 	return true;
diff --git a/arch/riscv/purgatory/Makefile b/arch/riscv/purgatory/Makefile
index 240592e3f5c2..530e497ca2f9 100644
--- a/arch/riscv/purgatory/Makefile
+++ b/arch/riscv/purgatory/Makefile
@@ -71,7 +71,7 @@ ifdef CONFIG_STACKPROTECTOR_STRONG
 PURGATORY_CFLAGS_REMOVE		+= -fstack-protector-strong
 endif
 
-ifdef CONFIG_CFI_CLANG
+ifdef CONFIG_CFI
 PURGATORY_CFLAGS_REMOVE		+= $(CC_FLAGS_CFI)
 endif
 
diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig
index bf680c26a33c..2414ee3ff002 100644
--- a/arch/s390/Kconfig
+++ b/arch/s390/Kconfig
@@ -49,6 +49,13 @@ config KASAN_SHADOW_OFFSET
 	depends on KASAN
 	default 0x1C000000000000
 
+config CC_HAS_BUILTIN_FFS
+	def_bool !(CC_IS_GCC && GCC_VERSION < 160000)
+	help
+	  GCC versions before 16.0.0 generate library calls to ffs()
+	  for __builtin_ffs() even when __has_builtin(__builtin_ffs)
+	  is true.
+
 config CC_ASM_FLAG_OUTPUT_BROKEN
 	def_bool CC_IS_GCC && GCC_VERSION < 140200
 	help
@@ -167,8 +174,6 @@ config S390
 	select GENERIC_GETTIMEOFDAY
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_TIME_VSYSCALL
-	select GENERIC_VDSO_DATA_STORE
-	select GENERIC_VDSO_TIME_NS
 	select GENERIC_IOREMAP if PCI
 	select HAVE_ALIGNED_STRUCT_PAGE
 	select HAVE_ARCH_AUDITSYSCALL
@@ -199,6 +204,7 @@ config S390
 	select HAVE_DYNAMIC_FTRACE_WITH_REGS
 	select HAVE_EBPF_JIT if HAVE_MARCH_Z196_FEATURES
 	select HAVE_EFFICIENT_UNALIGNED_ACCESS
+	select HAVE_GENERIC_TIF_BITS
 	select HAVE_GUP_FAST
 	select HAVE_FENTRY
 	select HAVE_FTRACE_GRAPH_FUNC
@@ -547,15 +553,11 @@ config NODES_SHIFT
 	depends on NUMA
 	default "1"
 
-config SCHED_SMT
-	def_bool n
-
-config SCHED_MC
-	def_bool n
-
 config SCHED_TOPOLOGY
 	def_bool y
 	prompt "Topology scheduler support"
+	select ARCH_SUPPORTS_SCHED_SMT
+	select ARCH_SUPPORTS_SCHED_MC
 	select SCHED_SMT
 	select SCHED_MC
 	help
diff --git a/arch/s390/boot/boot.h b/arch/s390/boot/boot.h
index c0152db285f0..37d5b097ede5 100644
--- a/arch/s390/boot/boot.h
+++ b/arch/s390/boot/boot.h
@@ -10,6 +10,7 @@
 
 #include <linux/printk.h>
 #include <asm/physmem_info.h>
+#include <asm/stacktrace.h>
 
 struct vmlinux_info {
 	unsigned long entry;
@@ -89,6 +90,13 @@ void __noreturn jump_to_kernel(psw_t *psw);
 #define boot_info(fmt, ...)	boot_printk(KERN_INFO boot_fmt(fmt), ##__VA_ARGS__)
 #define boot_debug(fmt, ...)	boot_printk(KERN_DEBUG boot_fmt(fmt), ##__VA_ARGS__)
 
+#define boot_panic(...) do {				\
+	boot_emerg(__VA_ARGS__);			\
+	print_stacktrace(current_frame_address());	\
+	boot_emerg(" -- System halted\n");		\
+	disabled_wait();				\
+} while (0)
+
 extern struct machine_info machine;
 extern int boot_console_loglevel;
 extern bool boot_ignore_loglevel;
diff --git a/arch/s390/boot/decompressor.c b/arch/s390/boot/decompressor.c
index 03500b9d9fb9..8d1bc25a6bf4 100644
--- a/arch/s390/boot/decompressor.c
+++ b/arch/s390/boot/decompressor.c
@@ -68,9 +68,7 @@ static void decompress_error(char *m)
 {
 	if (bootdebug)
 		boot_rb_dump();
-	boot_emerg("Decompression error: %s\n", m);
-	boot_emerg(" -- System halted\n");
-	disabled_wait();
+	boot_panic("Decompression error: %s\n", m);
 }
 
 unsigned long mem_safe_offset(void)
diff --git a/arch/s390/boot/physmem_info.c b/arch/s390/boot/physmem_info.c
index 45e3d057cfaa..1f2ca5435838 100644
--- a/arch/s390/boot/physmem_info.c
+++ b/arch/s390/boot/physmem_info.c
@@ -228,9 +228,7 @@ static void die_oom(unsigned long size, unsigned long align, unsigned long min,
 	boot_emerg("Usable online memory total: %lu Reserved: %lu Free: %lu\n",
 		   total_mem, total_reserved_mem,
 		   total_mem > total_reserved_mem ? total_mem - total_reserved_mem : 0);
-	print_stacktrace(current_frame_address());
-	boot_emerg(" -- System halted\n");
-	disabled_wait();
+	boot_panic("Oom\n");
 }
 
 static void _physmem_reserve(enum reserved_range_type type, unsigned long addr, unsigned long size)
diff --git a/arch/s390/boot/startup.c b/arch/s390/boot/startup.c
index 93684a775716..3fbd25b9498f 100644
--- a/arch/s390/boot/startup.c
+++ b/arch/s390/boot/startup.c
@@ -44,13 +44,6 @@ u64 __bootdata_preserved(clock_comparator_max) = -1UL;
 u64 __bootdata_preserved(stfle_fac_list[16]);
 struct oldmem_data __bootdata_preserved(oldmem_data);
 
-void error(char *x)
-{
-	boot_emerg("%s\n", x);
-	boot_emerg(" -- System halted\n");
-	disabled_wait();
-}
-
 static char sysinfo_page[PAGE_SIZE] __aligned(PAGE_SIZE);
 
 static void detect_machine_type(void)
@@ -220,10 +213,10 @@ static void rescue_initrd(unsigned long min, unsigned long max)
 static void copy_bootdata(void)
 {
 	if (__boot_data_end - __boot_data_start != vmlinux.bootdata_size)
-		error(".boot.data section size mismatch");
+		boot_panic(".boot.data section size mismatch\n");
 	memcpy((void *)vmlinux.bootdata_off, __boot_data_start, vmlinux.bootdata_size);
 	if (__boot_data_preserved_end - __boot_data_preserved_start != vmlinux.bootdata_preserved_size)
-		error(".boot.preserved.data section size mismatch");
+		boot_panic(".boot.preserved.data section size mismatch\n");
 	memcpy((void *)vmlinux.bootdata_preserved_off, __boot_data_preserved_start, vmlinux.bootdata_preserved_size);
 }
 
@@ -237,7 +230,7 @@ static void kaslr_adjust_relocs(unsigned long min_addr, unsigned long max_addr,
 	for (reloc = (int *)__vmlinux_relocs_64_start; reloc < (int *)__vmlinux_relocs_64_end; reloc++) {
 		loc = (long)*reloc + phys_offset;
 		if (loc < min_addr || loc > max_addr)
-			error("64-bit relocation outside of kernel!\n");
+			boot_panic("64-bit relocation outside of kernel!\n");
 		*(u64 *)loc += offset;
 	}
 }
diff --git a/arch/s390/boot/vmem.c b/arch/s390/boot/vmem.c
index 1d073acd05a7..cea3de4dce8c 100644
--- a/arch/s390/boot/vmem.c
+++ b/arch/s390/boot/vmem.c
@@ -530,6 +530,9 @@ void setup_vmem(unsigned long kernel_start, unsigned long kernel_end, unsigned l
 			 lowcore_address + sizeof(struct lowcore),
 			 POPULATE_LOWCORE);
 	for_each_physmem_usable_range(i, &start, &end) {
+		/* Do not map lowcore with identity mapping */
+		if (!start)
+			start = sizeof(struct lowcore);
 		pgtable_populate((unsigned long)__identity_va(start),
 				 (unsigned long)__identity_va(end),
 				 POPULATE_IDENTITY);
diff --git a/arch/s390/configs/debug_defconfig b/arch/s390/configs/debug_defconfig
index 6b33429f1c4d..99467f2dc018 100644
--- a/arch/s390/configs/debug_defconfig
+++ b/arch/s390/configs/debug_defconfig
@@ -5,6 +5,7 @@ CONFIG_WATCH_QUEUE=y
 CONFIG_AUDIT=y
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_POSIX_AUX_CLOCKS=y
 CONFIG_BPF_SYSCALL=y
 CONFIG_BPF_JIT=y
 CONFIG_BPF_JIT_ALWAYS_ON=y
@@ -19,6 +20,7 @@ CONFIG_TASK_XACCT=y
 CONFIG_TASK_IO_ACCOUNTING=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_SCHED_PROXY_EXEC=y
 CONFIG_NUMA_BALANCING=y
 CONFIG_MEMCG=y
 CONFIG_BLK_CGROUP=y
@@ -42,6 +44,7 @@ CONFIG_PROFILING=y
 CONFIG_KEXEC=y
 CONFIG_KEXEC_FILE=y
 CONFIG_KEXEC_SIG=y
+CONFIG_CRASH_DM_CRYPT=y
 CONFIG_LIVEPATCH=y
 CONFIG_MARCH_Z13=y
 CONFIG_NR_CPUS=512
@@ -105,6 +108,7 @@ CONFIG_CMA_AREAS=7
 CONFIG_MEM_SOFT_DIRTY=y
 CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
 CONFIG_IDLE_PAGE_TRACKING=y
+CONFIG_ZONE_DEVICE=y
 CONFIG_PERCPU_STATS=y
 CONFIG_GUP_TEST=y
 CONFIG_ANON_VMA_NAME=y
@@ -114,8 +118,13 @@ CONFIG_PACKET=y
 CONFIG_PACKET_DIAG=m
 CONFIG_UNIX=y
 CONFIG_UNIX_DIAG=m
+CONFIG_TLS=m
+CONFIG_TLS_DEVICE=y
+CONFIG_TLS_TOE=y
 CONFIG_XFRM_USER=m
 CONFIG_NET_KEY=m
+CONFIG_XDP_SOCKETS=y
+CONFIG_XDP_SOCKETS_DIAG=m
 CONFIG_SMC_DIAG=m
 CONFIG_SMC_LO=y
 CONFIG_INET=y
@@ -223,17 +232,19 @@ CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
 CONFIG_NETFILTER_XT_TARGET_CT=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_HMARK=m
 CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
 CONFIG_NETFILTER_XT_TARGET_LOG=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_NAT=m
 CONFIG_NETFILTER_XT_TARGET_NETMAP=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
+CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m
 CONFIG_NETFILTER_XT_TARGET_TEE=m
 CONFIG_NETFILTER_XT_TARGET_TPROXY=m
-CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_SECMARK=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
@@ -248,6 +259,7 @@ CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
@@ -318,16 +330,8 @@ CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_SECURITY=m
-CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NFT_FIB_IPV6=m
 CONFIG_IP6_NF_IPTABLES=m
@@ -340,15 +344,9 @@ CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_RPFILTER=m
 CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_IP6_NF_SECURITY=m
-CONFIG_IP6_NF_NAT=m
-CONFIG_IP6_NF_TARGET_MASQUERADE=m
 CONFIG_NF_TABLES_BRIDGE=m
+CONFIG_IP_SCTP=m
 CONFIG_RDS=m
 CONFIG_RDS_RDMA=m
 CONFIG_RDS_TCP=m
@@ -383,6 +381,7 @@ CONFIG_NET_SCH_FQ_CODEL=m
 CONFIG_NET_SCH_INGRESS=m
 CONFIG_NET_SCH_PLUG=m
 CONFIG_NET_SCH_ETS=m
+CONFIG_NET_SCH_DUALPI2=m
 CONFIG_NET_CLS_BASIC=m
 CONFIG_NET_CLS_ROUTE4=m
 CONFIG_NET_CLS_FW=m
@@ -504,6 +503,7 @@ CONFIG_DM_VDO=m
 CONFIG_NETDEVICES=y
 CONFIG_BONDING=m
 CONFIG_DUMMY=m
+CONFIG_OVPN=m
 CONFIG_EQUALIZER=m
 CONFIG_IFB=m
 CONFIG_MACVLAN=m
@@ -547,6 +547,7 @@ CONFIG_NLMON=m
 CONFIG_MLX4_EN=m
 CONFIG_MLX5_CORE=m
 CONFIG_MLX5_CORE_EN=y
+CONFIG_MLX5_SF=y
 # CONFIG_NET_VENDOR_META is not set
 # CONFIG_NET_VENDOR_MICREL is not set
 # CONFIG_NET_VENDOR_MICROCHIP is not set
@@ -641,6 +642,7 @@ CONFIG_VP_VDPA=m
 CONFIG_VHOST_NET=m
 CONFIG_VHOST_VSOCK=m
 CONFIG_VHOST_VDPA=m
+CONFIG_DEV_DAX=m
 CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_EXT4_FS_SECURITY=y
@@ -662,9 +664,7 @@ CONFIG_BTRFS_FS_POSIX_ACL=y
 CONFIG_BTRFS_DEBUG=y
 CONFIG_BTRFS_ASSERT=y
 CONFIG_NILFS2_FS=m
-CONFIG_BCACHEFS_FS=y
-CONFIG_BCACHEFS_QUOTA=y
-CONFIG_BCACHEFS_POSIX_ACL=y
+CONFIG_FS_DAX=y
 CONFIG_EXPORTFS_BLOCK_OPS=y
 CONFIG_FS_ENCRYPTION=y
 CONFIG_FS_VERITY=y
@@ -755,6 +755,8 @@ CONFIG_HARDENED_USERCOPY=y
 CONFIG_BUG_ON_DATA_CORRUPTION=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_SELFTESTS=y
+CONFIG_CRYPTO_SELFTESTS_FULL=y
+CONFIG_CRYPTO_NULL=y
 CONFIG_CRYPTO_PCRYPT=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_BENCHMARK=m
@@ -762,7 +764,6 @@ CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_ECDSA=m
 CONFIG_CRYPTO_ECRDSA=m
-CONFIG_CRYPTO_CURVE25519=m
 CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_ARIA=m
@@ -783,7 +784,6 @@ CONFIG_CRYPTO_HCTR2=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_AEGIS128=m
-CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_GCM=y
 CONFIG_CRYPTO_SEQIV=y
 CONFIG_CRYPTO_MD4=m
@@ -822,6 +822,7 @@ CONFIG_SYSTEM_BLACKLIST_KEYRING=y
 CONFIG_CRYPTO_KRB5=m
 CONFIG_CRYPTO_KRB5_SELFTESTS=y
 CONFIG_CORDIC=m
+CONFIG_TRACE_MMIO_ACCESS=y
 CONFIG_RANDOM32_SELFTEST=y
 CONFIG_XZ_DEC_MICROLZMA=y
 CONFIG_DMA_CMA=y
diff --git a/arch/s390/configs/defconfig b/arch/s390/configs/defconfig
index b75eb2775850..a8573807e0c0 100644
--- a/arch/s390/configs/defconfig
+++ b/arch/s390/configs/defconfig
@@ -4,6 +4,7 @@ CONFIG_WATCH_QUEUE=y
 CONFIG_AUDIT=y
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_POSIX_AUX_CLOCKS=y
 CONFIG_BPF_SYSCALL=y
 CONFIG_BPF_JIT=y
 CONFIG_BPF_JIT_ALWAYS_ON=y
@@ -17,6 +18,7 @@ CONFIG_TASK_XACCT=y
 CONFIG_TASK_IO_ACCOUNTING=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
+CONFIG_SCHED_PROXY_EXEC=y
 CONFIG_NUMA_BALANCING=y
 CONFIG_MEMCG=y
 CONFIG_BLK_CGROUP=y
@@ -40,11 +42,12 @@ CONFIG_PROFILING=y
 CONFIG_KEXEC=y
 CONFIG_KEXEC_FILE=y
 CONFIG_KEXEC_SIG=y
+CONFIG_CRASH_DM_CRYPT=y
 CONFIG_LIVEPATCH=y
 CONFIG_MARCH_Z13=y
 CONFIG_NR_CPUS=512
 CONFIG_NUMA=y
-CONFIG_HZ_100=y
+CONFIG_HZ_1000=y
 CONFIG_CERT_STORE=y
 CONFIG_EXPOLINE=y
 CONFIG_EXPOLINE_AUTO=y
@@ -97,6 +100,7 @@ CONFIG_CMA_AREAS=7
 CONFIG_MEM_SOFT_DIRTY=y
 CONFIG_DEFERRED_STRUCT_PAGE_INIT=y
 CONFIG_IDLE_PAGE_TRACKING=y
+CONFIG_ZONE_DEVICE=y
 CONFIG_PERCPU_STATS=y
 CONFIG_ANON_VMA_NAME=y
 CONFIG_USERFAULTFD=y
@@ -105,8 +109,13 @@ CONFIG_PACKET=y
 CONFIG_PACKET_DIAG=m
 CONFIG_UNIX=y
 CONFIG_UNIX_DIAG=m
+CONFIG_TLS=m
+CONFIG_TLS_DEVICE=y
+CONFIG_TLS_TOE=y
 CONFIG_XFRM_USER=m
 CONFIG_NET_KEY=m
+CONFIG_XDP_SOCKETS=y
+CONFIG_XDP_SOCKETS_DIAG=m
 CONFIG_SMC_DIAG=m
 CONFIG_SMC_LO=y
 CONFIG_INET=y
@@ -214,17 +223,19 @@ CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
 CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
 CONFIG_NETFILTER_XT_TARGET_CT=m
 CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HL=m
 CONFIG_NETFILTER_XT_TARGET_HMARK=m
 CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
 CONFIG_NETFILTER_XT_TARGET_LOG=m
 CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_NAT=m
 CONFIG_NETFILTER_XT_TARGET_NETMAP=m
 CONFIG_NETFILTER_XT_TARGET_NFLOG=m
 CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
 CONFIG_NETFILTER_XT_TARGET_REDIRECT=m
+CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m
 CONFIG_NETFILTER_XT_TARGET_TEE=m
 CONFIG_NETFILTER_XT_TARGET_TPROXY=m
-CONFIG_NETFILTER_XT_TARGET_TRACE=m
 CONFIG_NETFILTER_XT_TARGET_SECMARK=m
 CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
 CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
@@ -239,6 +250,7 @@ CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
 CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
 CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
 CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
 CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
 CONFIG_NETFILTER_XT_MATCH_DSCP=m
 CONFIG_NETFILTER_XT_MATCH_ESP=m
@@ -309,16 +321,8 @@ CONFIG_IP_NF_MATCH_AH=m
 CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_RPFILTER=m
 CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_NAT=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_SECURITY=m
-CONFIG_IP_NF_ARPFILTER=m
 CONFIG_IP_NF_ARP_MANGLE=m
 CONFIG_NFT_FIB_IPV6=m
 CONFIG_IP6_NF_IPTABLES=m
@@ -331,15 +335,9 @@ CONFIG_IP6_NF_MATCH_IPV6HEADER=m
 CONFIG_IP6_NF_MATCH_MH=m
 CONFIG_IP6_NF_MATCH_RPFILTER=m
 CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
 CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_IP6_NF_SECURITY=m
-CONFIG_IP6_NF_NAT=m
-CONFIG_IP6_NF_TARGET_MASQUERADE=m
 CONFIG_NF_TABLES_BRIDGE=m
+CONFIG_IP_SCTP=m
 CONFIG_RDS=m
 CONFIG_RDS_RDMA=m
 CONFIG_RDS_TCP=m
@@ -373,6 +371,7 @@ CONFIG_NET_SCH_FQ_CODEL=m
 CONFIG_NET_SCH_INGRESS=m
 CONFIG_NET_SCH_PLUG=m
 CONFIG_NET_SCH_ETS=m
+CONFIG_NET_SCH_DUALPI2=m
 CONFIG_NET_CLS_BASIC=m
 CONFIG_NET_CLS_ROUTE4=m
 CONFIG_NET_CLS_FW=m
@@ -494,6 +493,7 @@ CONFIG_DM_VDO=m
 CONFIG_NETDEVICES=y
 CONFIG_BONDING=m
 CONFIG_DUMMY=m
+CONFIG_OVPN=m
 CONFIG_EQUALIZER=m
 CONFIG_IFB=m
 CONFIG_MACVLAN=m
@@ -537,6 +537,7 @@ CONFIG_NLMON=m
 CONFIG_MLX4_EN=m
 CONFIG_MLX5_CORE=m
 CONFIG_MLX5_CORE_EN=y
+CONFIG_MLX5_SF=y
 # CONFIG_NET_VENDOR_META is not set
 # CONFIG_NET_VENDOR_MICREL is not set
 # CONFIG_NET_VENDOR_MICROCHIP is not set
@@ -631,6 +632,7 @@ CONFIG_VP_VDPA=m
 CONFIG_VHOST_NET=m
 CONFIG_VHOST_VSOCK=m
 CONFIG_VHOST_VDPA=m
+CONFIG_DEV_DAX=m
 CONFIG_EXT4_FS=y
 CONFIG_EXT4_FS_POSIX_ACL=y
 CONFIG_EXT4_FS_SECURITY=y
@@ -649,9 +651,7 @@ CONFIG_OCFS2_FS=m
 CONFIG_BTRFS_FS=y
 CONFIG_BTRFS_FS_POSIX_ACL=y
 CONFIG_NILFS2_FS=m
-CONFIG_BCACHEFS_FS=m
-CONFIG_BCACHEFS_QUOTA=y
-CONFIG_BCACHEFS_POSIX_ACL=y
+CONFIG_FS_DAX=y
 CONFIG_EXPORTFS_BLOCK_OPS=y
 CONFIG_FS_ENCRYPTION=y
 CONFIG_FS_VERITY=y
@@ -683,7 +683,6 @@ CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_TMPFS_INODE64=y
 CONFIG_TMPFS_QUOTA=y
 CONFIG_HUGETLBFS=y
-CONFIG_CONFIGFS_FS=m
 CONFIG_ECRYPT_FS=m
 CONFIG_CRAMFS=m
 CONFIG_SQUASHFS=m
@@ -741,6 +740,7 @@ CONFIG_BUG_ON_DATA_CORRUPTION=y
 CONFIG_CRYPTO_FIPS=y
 CONFIG_CRYPTO_USER=m
 CONFIG_CRYPTO_SELFTESTS=y
+CONFIG_CRYPTO_NULL=y
 CONFIG_CRYPTO_PCRYPT=m
 CONFIG_CRYPTO_CRYPTD=m
 CONFIG_CRYPTO_BENCHMARK=m
@@ -748,7 +748,6 @@ CONFIG_CRYPTO_DH=m
 CONFIG_CRYPTO_ECDH=m
 CONFIG_CRYPTO_ECDSA=m
 CONFIG_CRYPTO_ECRDSA=m
-CONFIG_CRYPTO_CURVE25519=m
 CONFIG_CRYPTO_AES_TI=m
 CONFIG_CRYPTO_ANUBIS=m
 CONFIG_CRYPTO_ARIA=m
@@ -769,7 +768,6 @@ CONFIG_CRYPTO_HCTR2=m
 CONFIG_CRYPTO_LRW=m
 CONFIG_CRYPTO_PCBC=m
 CONFIG_CRYPTO_AEGIS128=m
-CONFIG_CRYPTO_CHACHA20POLY1305=m
 CONFIG_CRYPTO_GCM=y
 CONFIG_CRYPTO_SEQIV=y
 CONFIG_CRYPTO_MD4=m
diff --git a/arch/s390/configs/zfcpdump_defconfig b/arch/s390/configs/zfcpdump_defconfig
index 8163c1702720..ed0b137353ad 100644
--- a/arch/s390/configs/zfcpdump_defconfig
+++ b/arch/s390/configs/zfcpdump_defconfig
@@ -1,5 +1,6 @@
 CONFIG_NO_HZ_IDLE=y
 CONFIG_HIGH_RES_TIMERS=y
+CONFIG_POSIX_AUX_CLOCKS=y
 CONFIG_BPF_SYSCALL=y
 # CONFIG_CPU_ISOLATION is not set
 # CONFIG_UTS_NS is not set
@@ -11,7 +12,7 @@ CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_KEXEC=y
 CONFIG_MARCH_Z13=y
 CONFIG_NR_CPUS=2
-CONFIG_HZ_100=y
+CONFIG_HZ_1000=y
 # CONFIG_CHSC_SCH is not set
 # CONFIG_SCM_BUS is not set
 # CONFIG_AP is not set
diff --git a/arch/s390/hypfs/hypfs_dbfs.c b/arch/s390/hypfs/hypfs_dbfs.c
index 5d9effb0867c..41a0d2066fa0 100644
--- a/arch/s390/hypfs/hypfs_dbfs.c
+++ b/arch/s390/hypfs/hypfs_dbfs.c
@@ -6,6 +6,7 @@
  * Author(s): Michael Holzheu <holzheu@linux.vnet.ibm.com>
  */
 
+#include <linux/security.h>
 #include <linux/slab.h>
 #include "hypfs.h"
 
@@ -66,23 +67,27 @@ static long dbfs_ioctl(struct file *file, unsigned int cmd, unsigned long arg)
 	long rc;
 
 	mutex_lock(&df->lock);
-	if (df->unlocked_ioctl)
-		rc = df->unlocked_ioctl(file, cmd, arg);
-	else
-		rc = -ENOTTY;
+	rc = df->unlocked_ioctl(file, cmd, arg);
 	mutex_unlock(&df->lock);
 	return rc;
 }
 
-static const struct file_operations dbfs_ops = {
+static const struct file_operations dbfs_ops_ioctl = {
 	.read		= dbfs_read,
 	.unlocked_ioctl = dbfs_ioctl,
 };
 
+static const struct file_operations dbfs_ops = {
+	.read		= dbfs_read,
+};
+
 void hypfs_dbfs_create_file(struct hypfs_dbfs_file *df)
 {
-	df->dentry = debugfs_create_file(df->name, 0400, dbfs_dir, df,
-					 &dbfs_ops);
+	const struct file_operations *fops = &dbfs_ops;
+
+	if (df->unlocked_ioctl && !security_locked_down(LOCKDOWN_DEBUGFS))
+		fops = &dbfs_ops_ioctl;
+	df->dentry = debugfs_create_file(df->name, 0400, dbfs_dir, df, fops);
 	mutex_init(&df->lock);
 }
 
diff --git a/arch/s390/include/asm/bitops.h b/arch/s390/include/asm/bitops.h
index a5ca0a947691..ec945fb60c02 100644
--- a/arch/s390/include/asm/bitops.h
+++ b/arch/s390/include/asm/bitops.h
@@ -122,6 +122,8 @@ static inline bool test_bit_inv(unsigned long nr,
 	return test_bit(nr ^ (BITS_PER_LONG - 1), ptr);
 }
 
+#ifndef CONFIG_CC_HAS_BUILTIN_FFS
+
 /**
  * __flogr - find leftmost one
  * @word - The word to search
@@ -130,11 +132,12 @@ static inline bool test_bit_inv(unsigned long nr,
  * where the most significant bit has bit number 0.
  * If no bit is set this function returns 64.
  */
-static inline unsigned char __flogr(unsigned long word)
+static __always_inline __attribute_const__ unsigned long __flogr(unsigned long word)
 {
-	if (__builtin_constant_p(word)) {
-		unsigned long bit = 0;
+	unsigned long bit;
 
+	if (__builtin_constant_p(word)) {
+		bit = 0;
 		if (!word)
 			return 64;
 		if (!(word & 0xffffffff00000000UL)) {
@@ -163,86 +166,49 @@ static inline unsigned char __flogr(unsigned long word)
 		}
 		return bit;
 	} else {
-		union register_pair rp;
+		union register_pair rp __uninitialized;
 
 		rp.even = word;
-		asm volatile(
-			"       flogr   %[rp],%[rp]\n"
-			: [rp] "+d" (rp.pair) : : "cc");
-		return rp.even;
+		asm("flogr	%[rp],%[rp]"
+		    : [rp] "+d" (rp.pair) : : "cc");
+		bit = rp.even;
+		/*
+		 * The result of the flogr instruction is a value in the range
+		 * of 0..64. Let the compiler know that the AND operation can
+		 * be optimized away.
+		 */
+		__assume(bit <= 64);
+		return bit & 127;
 	}
 }
 
 /**
- * __ffs - find first bit in word.
- * @word: The word to search
- *
- * Undefined if no bit exists, so code should check against 0 first.
- */
-static inline unsigned long __ffs(unsigned long word)
-{
-	return __flogr(-word & word) ^ (BITS_PER_LONG - 1);
-}
-
-/**
  * ffs - find first bit set
  * @word: the word to search
  *
  * This is defined the same way as the libc and
  * compiler builtin ffs routines (man ffs).
  */
-static inline int ffs(int word)
+static __always_inline __flatten __attribute_const__ int ffs(int word)
 {
-	unsigned long mask = 2 * BITS_PER_LONG - 1;
 	unsigned int val = (unsigned int)word;
 
-	return (1 + (__flogr(-val & val) ^ (BITS_PER_LONG - 1))) & mask;
-}
-
-/**
- * __fls - find last (most-significant) set bit in a long word
- * @word: the word to search
- *
- * Undefined if no set bit exists, so code should check against 0 first.
- */
-static inline unsigned long __fls(unsigned long word)
-{
-	return __flogr(word) ^ (BITS_PER_LONG - 1);
+	return BITS_PER_LONG - __flogr(-val & val);
 }
 
-/**
- * fls64 - find last set bit in a 64-bit word
- * @word: the word to search
- *
- * This is defined in a similar way as the libc and compiler builtin
- * ffsll, but returns the position of the most significant set bit.
- *
- * fls64(value) returns 0 if value is 0 or the position of the last
- * set bit if value is nonzero. The last (most significant) bit is
- * at position 64.
- */
-static inline int fls64(unsigned long word)
-{
-	unsigned long mask = 2 * BITS_PER_LONG - 1;
+#else /* CONFIG_CC_HAS_BUILTIN_FFS */
 
-	return (1 + (__flogr(word) ^ (BITS_PER_LONG - 1))) & mask;
-}
+#include <asm-generic/bitops/builtin-ffs.h>
 
-/**
- * fls - find last (most-significant) bit set
- * @word: the word to search
- *
- * This is defined the same way as ffs.
- * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
- */
-static inline int fls(unsigned int word)
-{
-	return fls64(word);
-}
+#endif /* CONFIG_CC_HAS_BUILTIN_FFS */
 
+#include <asm-generic/bitops/builtin-__ffs.h>
+#include <asm-generic/bitops/ffz.h>
+#include <asm-generic/bitops/builtin-__fls.h>
+#include <asm-generic/bitops/builtin-fls.h>
+#include <asm-generic/bitops/fls64.h>
 #include <asm/arch_hweight.h>
 #include <asm-generic/bitops/const_hweight.h>
-#include <asm-generic/bitops/ffz.h>
 #include <asm-generic/bitops/sched.h>
 #include <asm-generic/bitops/le.h>
 #include <asm-generic/bitops/ext2-atomic-setbit.h>
diff --git a/arch/s390/include/asm/pci_insn.h b/arch/s390/include/asm/pci_insn.h
index e5f57cfe1d45..025c6dcbf893 100644
--- a/arch/s390/include/asm/pci_insn.h
+++ b/arch/s390/include/asm/pci_insn.h
@@ -16,11 +16,11 @@
 #define ZPCI_PCI_ST_FUNC_NOT_AVAIL		40
 #define ZPCI_PCI_ST_ALREADY_IN_RQ_STATE		44
 
-/* Load/Store return codes */
-#define ZPCI_PCI_LS_OK				0
-#define ZPCI_PCI_LS_ERR				1
-#define ZPCI_PCI_LS_BUSY			2
-#define ZPCI_PCI_LS_INVAL_HANDLE		3
+/* PCI instruction condition codes */
+#define ZPCI_CC_OK				0
+#define ZPCI_CC_ERR				1
+#define ZPCI_CC_BUSY				2
+#define ZPCI_CC_INVAL_HANDLE			3
 
 /* Load/Store address space identifiers */
 #define ZPCI_PCIAS_MEMIO_0			0
diff --git a/arch/s390/include/asm/pgalloc.h b/arch/s390/include/asm/pgalloc.h
index 5345398df653..a16e65072371 100644
--- a/arch/s390/include/asm/pgalloc.h
+++ b/arch/s390/include/asm/pgalloc.h
@@ -19,12 +19,16 @@
 
 #define CRST_ALLOC_ORDER 2
 
-unsigned long *crst_table_alloc(struct mm_struct *);
+unsigned long *crst_table_alloc_noprof(struct mm_struct *);
+#define crst_table_alloc(...)	alloc_hooks(crst_table_alloc_noprof(__VA_ARGS__))
 void crst_table_free(struct mm_struct *, unsigned long *);
 
-unsigned long *page_table_alloc(struct mm_struct *);
-struct ptdesc *page_table_alloc_pgste(struct mm_struct *mm);
+unsigned long *page_table_alloc_noprof(struct mm_struct *);
+#define page_table_alloc(...)	alloc_hooks(page_table_alloc_noprof(__VA_ARGS__))
 void page_table_free(struct mm_struct *, unsigned long *);
+
+struct ptdesc *page_table_alloc_pgste_noprof(struct mm_struct *mm);
+#define page_table_alloc_pgste(...)	alloc_hooks(page_table_alloc_pgste_noprof(__VA_ARGS__))
 void page_table_free_pgste(struct ptdesc *ptdesc);
 
 static inline void crst_table_init(unsigned long *crst, unsigned long entry)
@@ -48,9 +52,9 @@ static inline unsigned long check_asce_limit(struct mm_struct *mm, unsigned long
 	return addr;
 }
 
-static inline p4d_t *p4d_alloc_one(struct mm_struct *mm, unsigned long address)
+static inline p4d_t *p4d_alloc_one_noprof(struct mm_struct *mm, unsigned long address)
 {
-	unsigned long *table = crst_table_alloc(mm);
+	unsigned long *table = crst_table_alloc_noprof(mm);
 
 	if (!table)
 		return NULL;
@@ -59,6 +63,7 @@ static inline p4d_t *p4d_alloc_one(struct mm_struct *mm, unsigned long address)
 
 	return (p4d_t *) table;
 }
+#define p4d_alloc_one(...)	alloc_hooks(p4d_alloc_one_noprof(__VA_ARGS__))
 
 static inline void p4d_free(struct mm_struct *mm, p4d_t *p4d)
 {
@@ -69,9 +74,9 @@ static inline void p4d_free(struct mm_struct *mm, p4d_t *p4d)
 	crst_table_free(mm, (unsigned long *) p4d);
 }
 
-static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long address)
+static inline pud_t *pud_alloc_one_noprof(struct mm_struct *mm, unsigned long address)
 {
-	unsigned long *table = crst_table_alloc(mm);
+	unsigned long *table = crst_table_alloc_noprof(mm);
 
 	if (!table)
 		return NULL;
@@ -80,6 +85,7 @@ static inline pud_t *pud_alloc_one(struct mm_struct *mm, unsigned long address)
 
 	return (pud_t *) table;
 }
+#define pud_alloc_one(...)	alloc_hooks(pud_alloc_one_noprof(__VA_ARGS__))
 
 static inline void pud_free(struct mm_struct *mm, pud_t *pud)
 {
@@ -90,9 +96,9 @@ static inline void pud_free(struct mm_struct *mm, pud_t *pud)
 	crst_table_free(mm, (unsigned long *) pud);
 }
 
-static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long vmaddr)
+static inline pmd_t *pmd_alloc_one_noprof(struct mm_struct *mm, unsigned long vmaddr)
 {
-	unsigned long *table = crst_table_alloc(mm);
+	unsigned long *table = crst_table_alloc_noprof(mm);
 
 	if (!table)
 		return NULL;
@@ -103,6 +109,7 @@ static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long vmaddr)
 	}
 	return (pmd_t *) table;
 }
+#define pmd_alloc_one(...)	alloc_hooks(pmd_alloc_one_noprof(__VA_ARGS__))
 
 static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
 {
@@ -127,9 +134,9 @@ static inline void pud_populate(struct mm_struct *mm, pud_t *pud, pmd_t *pmd)
 	set_pud(pud, __pud(_REGION3_ENTRY | __pa(pmd)));
 }
 
-static inline pgd_t *pgd_alloc(struct mm_struct *mm)
+static inline pgd_t *pgd_alloc_noprof(struct mm_struct *mm)
 {
-	unsigned long *table = crst_table_alloc(mm);
+	unsigned long *table = crst_table_alloc_noprof(mm);
 
 	if (!table)
 		return NULL;
@@ -137,6 +144,7 @@ static inline pgd_t *pgd_alloc(struct mm_struct *mm)
 
 	return (pgd_t *) table;
 }
+#define pgd_alloc(...)	alloc_hooks(pgd_alloc_noprof(__VA_ARGS__))
 
 static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
 {
diff --git a/arch/s390/include/asm/thread_info.h b/arch/s390/include/asm/thread_info.h
index f6ed2c8192c8..7878e9bfbf07 100644
--- a/arch/s390/include/asm/thread_info.h
+++ b/arch/s390/include/asm/thread_info.h
@@ -56,49 +56,31 @@ void arch_setup_new_exec(void);
 
 /*
  * thread information flags bit numbers
+ *
+ * Tell the generic TIF infrastructure which special bits s390 supports
  */
-#define TIF_NOTIFY_RESUME	0	/* callback before returning to user */
-#define TIF_SIGPENDING		1	/* signal pending */
-#define TIF_NEED_RESCHED	2	/* rescheduling necessary */
-#define TIF_NEED_RESCHED_LAZY	3	/* lazy rescheduling needed */
-#define TIF_UPROBE		4	/* breakpointed or single-stepping */
-#define TIF_PATCH_PENDING	5	/* pending live patching update */
-#define TIF_ASCE_PRIMARY	6	/* primary asce is kernel asce */
-#define TIF_NOTIFY_SIGNAL	7	/* signal notifications exist */
-#define TIF_GUARDED_STORAGE	8	/* load guarded storage control block */
-#define TIF_ISOLATE_BP_GUEST	9	/* Run KVM guests with isolated BP */
-#define TIF_PER_TRAP		10	/* Need to handle PER trap on exit to usermode */
-#define TIF_31BIT		16	/* 32bit process */
-#define TIF_MEMDIE		17	/* is terminating due to OOM killer */
-#define TIF_RESTORE_SIGMASK	18	/* restore signal mask in do_signal() */
-#define TIF_SINGLE_STEP		19	/* This task is single stepped */
-#define TIF_BLOCK_STEP		20	/* This task is block stepped */
-#define TIF_UPROBE_SINGLESTEP	21	/* This task is uprobe single stepped */
-#define TIF_SYSCALL_TRACE	24	/* syscall trace active */
-#define TIF_SYSCALL_AUDIT	25	/* syscall auditing active */
-#define TIF_SECCOMP		26	/* secure computing */
-#define TIF_SYSCALL_TRACEPOINT	27	/* syscall tracepoint instrumentation */
+#define HAVE_TIF_NEED_RESCHED_LAZY
+#define HAVE_TIF_RESTORE_SIGMASK
+
+#include <asm-generic/thread_info_tif.h>
+
+/* Architecture specific bits */
+#define TIF_ASCE_PRIMARY	16	/* primary asce is kernel asce */
+#define TIF_GUARDED_STORAGE	17	/* load guarded storage control block */
+#define TIF_ISOLATE_BP_GUEST	18	/* Run KVM guests with isolated BP */
+#define TIF_PER_TRAP		19	/* Need to handle PER trap on exit to usermode */
+#define TIF_31BIT		20	/* 32bit process */
+#define TIF_SINGLE_STEP		21	/* This task is single stepped */
+#define TIF_BLOCK_STEP		22	/* This task is block stepped */
+#define TIF_UPROBE_SINGLESTEP	23	/* This task is uprobe single stepped */
 
-#define _TIF_NOTIFY_RESUME	BIT(TIF_NOTIFY_RESUME)
-#define _TIF_SIGPENDING		BIT(TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED	BIT(TIF_NEED_RESCHED)
-#define _TIF_NEED_RESCHED_LAZY	BIT(TIF_NEED_RESCHED_LAZY)
-#define _TIF_UPROBE		BIT(TIF_UPROBE)
-#define _TIF_PATCH_PENDING	BIT(TIF_PATCH_PENDING)
 #define _TIF_ASCE_PRIMARY	BIT(TIF_ASCE_PRIMARY)
-#define _TIF_NOTIFY_SIGNAL	BIT(TIF_NOTIFY_SIGNAL)
 #define _TIF_GUARDED_STORAGE	BIT(TIF_GUARDED_STORAGE)
 #define _TIF_ISOLATE_BP_GUEST	BIT(TIF_ISOLATE_BP_GUEST)
 #define _TIF_PER_TRAP		BIT(TIF_PER_TRAP)
 #define _TIF_31BIT		BIT(TIF_31BIT)
-#define _TIF_MEMDIE		BIT(TIF_MEMDIE)
-#define _TIF_RESTORE_SIGMASK	BIT(TIF_RESTORE_SIGMASK)
 #define _TIF_SINGLE_STEP	BIT(TIF_SINGLE_STEP)
 #define _TIF_BLOCK_STEP		BIT(TIF_BLOCK_STEP)
 #define _TIF_UPROBE_SINGLESTEP	BIT(TIF_UPROBE_SINGLESTEP)
-#define _TIF_SYSCALL_TRACE	BIT(TIF_SYSCALL_TRACE)
-#define _TIF_SYSCALL_AUDIT	BIT(TIF_SYSCALL_AUDIT)
-#define _TIF_SECCOMP		BIT(TIF_SECCOMP)
-#define _TIF_SYSCALL_TRACEPOINT	BIT(TIF_SYSCALL_TRACEPOINT)
 
 #endif /* _ASM_THREAD_INFO_H */
diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c
index 95ecad9c7d7d..a8915663e917 100644
--- a/arch/s390/kernel/asm-offsets.c
+++ b/arch/s390/kernel/asm-offsets.c
@@ -4,6 +4,7 @@
  * This code generates raw asm output which is post-processed to extract
  * and format the required data.
  */
+#define COMPILE_OFFSETS
 
 #include <linux/kbuild.h>
 #include <linux/sched.h>
diff --git a/arch/s390/kernel/debug.c b/arch/s390/kernel/debug.c
index c62100dc62c8..6a26f202441d 100644
--- a/arch/s390/kernel/debug.c
+++ b/arch/s390/kernel/debug.c
@@ -1416,18 +1416,12 @@ static inline char *debug_get_user_string(const char __user *user_buf,
 {
 	char *buffer;
 
-	buffer = kmalloc(user_len + 1, GFP_KERNEL);
-	if (!buffer)
-		return ERR_PTR(-ENOMEM);
-	if (copy_from_user(buffer, user_buf, user_len) != 0) {
-		kfree(buffer);
-		return ERR_PTR(-EFAULT);
-	}
+	buffer = memdup_user_nul(user_buf, user_len);
+	if (IS_ERR(buffer))
+		return buffer;
 	/* got the string, now strip linefeed. */
 	if (buffer[user_len - 1] == '\n')
 		buffer[user_len - 1] = 0;
-	else
-		buffer[user_len] = 0;
 	return buffer;
 }
 
diff --git a/arch/s390/kernel/diag/diag324.c b/arch/s390/kernel/diag/diag324.c
index 7fa4c0b7eb6c..f0a8b4841fb9 100644
--- a/arch/s390/kernel/diag/diag324.c
+++ b/arch/s390/kernel/diag/diag324.c
@@ -116,7 +116,7 @@ static void pibwork_handler(struct work_struct *work)
 	mutex_lock(&pibmutex);
 	timedout = ktime_add_ns(data->expire, PIBWORK_DELAY);
 	if (ktime_before(ktime_get(), timedout)) {
-		mod_delayed_work(system_wq, &pibwork, nsecs_to_jiffies(PIBWORK_DELAY));
+		mod_delayed_work(system_percpu_wq, &pibwork, nsecs_to_jiffies(PIBWORK_DELAY));
 		goto out;
 	}
 	vfree(data->pib);
@@ -174,7 +174,7 @@ long diag324_pibbuf(unsigned long arg)
 		pib_update(data);
 		data->sequence++;
 		data->expire = ktime_add_ns(ktime_get(), tod_to_ns(data->pib->intv));
-		mod_delayed_work(system_wq, &pibwork, nsecs_to_jiffies(PIBWORK_DELAY));
+		mod_delayed_work(system_percpu_wq, &pibwork, nsecs_to_jiffies(PIBWORK_DELAY));
 		first = false;
 	}
 	rc = data->rc;
diff --git a/arch/s390/kernel/hiperdispatch.c b/arch/s390/kernel/hiperdispatch.c
index e7b66d046e8d..2507bc3f7757 100644
--- a/arch/s390/kernel/hiperdispatch.c
+++ b/arch/s390/kernel/hiperdispatch.c
@@ -191,7 +191,7 @@ int hd_enable_hiperdispatch(void)
 		return 0;
 	if (hd_online_cores <= hd_entitled_cores)
 		return 0;
-	mod_delayed_work(system_wq, &hd_capacity_work, HD_DELAY_INTERVAL * hd_delay_factor);
+	mod_delayed_work(system_dfl_wq, &hd_capacity_work, HD_DELAY_INTERVAL * hd_delay_factor);
 	hd_update_capacities();
 	return 1;
 }
diff --git a/arch/s390/kernel/kexec_elf.c b/arch/s390/kernel/kexec_elf.c
index 4d364de43799..143e34a4eca5 100644
--- a/arch/s390/kernel/kexec_elf.c
+++ b/arch/s390/kernel/kexec_elf.c
@@ -16,7 +16,7 @@
 static int kexec_file_add_kernel_elf(struct kimage *image,
 				     struct s390_load_data *data)
 {
-	struct kexec_buf buf;
+	struct kexec_buf buf = {};
 	const Elf_Ehdr *ehdr;
 	const Elf_Phdr *phdr;
 	Elf_Addr entry;
diff --git a/arch/s390/kernel/kexec_image.c b/arch/s390/kernel/kexec_image.c
index a32ce8bea745..9a439175723c 100644
--- a/arch/s390/kernel/kexec_image.c
+++ b/arch/s390/kernel/kexec_image.c
@@ -16,7 +16,7 @@
 static int kexec_file_add_kernel_image(struct kimage *image,
 				       struct s390_load_data *data)
 {
-	struct kexec_buf buf;
+	struct kexec_buf buf = {};
 
 	buf.image = image;
 
diff --git a/arch/s390/kernel/machine_kexec_file.c b/arch/s390/kernel/machine_kexec_file.c
index c2bac14dd668..a36d7311c668 100644
--- a/arch/s390/kernel/machine_kexec_file.c
+++ b/arch/s390/kernel/machine_kexec_file.c
@@ -129,7 +129,7 @@ static int kexec_file_update_purgatory(struct kimage *image,
 static int kexec_file_add_purgatory(struct kimage *image,
 				    struct s390_load_data *data)
 {
-	struct kexec_buf buf;
+	struct kexec_buf buf = {};
 	int ret;
 
 	buf.image = image;
@@ -152,7 +152,7 @@ static int kexec_file_add_purgatory(struct kimage *image,
 static int kexec_file_add_initrd(struct kimage *image,
 				 struct s390_load_data *data)
 {
-	struct kexec_buf buf;
+	struct kexec_buf buf = {};
 	int ret;
 
 	buf.image = image;
@@ -184,7 +184,7 @@ static int kexec_file_add_ipl_report(struct kimage *image,
 {
 	__u32 *lc_ipl_parmblock_ptr;
 	unsigned int len, ncerts;
-	struct kexec_buf buf;
+	struct kexec_buf buf = {};
 	unsigned long addr;
 	void *ptr, *end;
 	int ret;
diff --git a/arch/s390/kernel/perf_cpum_cf.c b/arch/s390/kernel/perf_cpum_cf.c
index 4d09954ebf49..04457d88e589 100644
--- a/arch/s390/kernel/perf_cpum_cf.c
+++ b/arch/s390/kernel/perf_cpum_cf.c
@@ -760,8 +760,6 @@ static int __hw_perf_event_init(struct perf_event *event, unsigned int type)
 		break;
 
 	case PERF_TYPE_HARDWARE:
-		if (is_sampling_event(event))	/* No sampling support */
-			return -ENOENT;
 		ev = attr->config;
 		if (!attr->exclude_user && attr->exclude_kernel) {
 			/*
@@ -859,6 +857,8 @@ static int cpumf_pmu_event_init(struct perf_event *event)
 	unsigned int type = event->attr.type;
 	int err = -ENOENT;
 
+	if (is_sampling_event(event))	/* No sampling support */
+		return err;
 	if (type == PERF_TYPE_HARDWARE || type == PERF_TYPE_RAW)
 		err = __hw_perf_event_init(event, type);
 	else if (event->pmu->type == type)
diff --git a/arch/s390/kernel/perf_pai_crypto.c b/arch/s390/kernel/perf_pai_crypto.c
index f373a1009c45..9455f213dc20 100644
--- a/arch/s390/kernel/perf_pai_crypto.c
+++ b/arch/s390/kernel/perf_pai_crypto.c
@@ -285,10 +285,10 @@ static int paicrypt_event_init(struct perf_event *event)
 	/* PAI crypto PMU registered as PERF_TYPE_RAW, check event type */
 	if (a->type != PERF_TYPE_RAW && event->pmu->type != a->type)
 		return -ENOENT;
-	/* PAI crypto event must be in valid range */
+	/* PAI crypto event must be in valid range, try others if not */
 	if (a->config < PAI_CRYPTO_BASE ||
 	    a->config > PAI_CRYPTO_BASE + paicrypt_cnt)
-		return -EINVAL;
+		return -ENOENT;
 	/* Allow only CRYPTO_ALL for sampling */
 	if (a->sample_period && a->config != PAI_CRYPTO_BASE)
 		return -EINVAL;
diff --git a/arch/s390/kernel/perf_pai_ext.c b/arch/s390/kernel/perf_pai_ext.c
index d827473e7f87..7b32935273ce 100644
--- a/arch/s390/kernel/perf_pai_ext.c
+++ b/arch/s390/kernel/perf_pai_ext.c
@@ -265,7 +265,7 @@ static int paiext_event_valid(struct perf_event *event)
 		event->hw.config_base = offsetof(struct paiext_cb, acc);
 		return 0;
 	}
-	return -EINVAL;
+	return -ENOENT;
 }
 
 /* Might be called on different CPU than the one the event is intended for. */
diff --git a/arch/s390/kernel/process.c b/arch/s390/kernel/process.c
index f55f09cda6f8..b107dbca4ed7 100644
--- a/arch/s390/kernel/process.c
+++ b/arch/s390/kernel/process.c
@@ -106,7 +106,7 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 
 int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
-	unsigned long clone_flags = args->flags;
+	u64 clone_flags = args->flags;
 	unsigned long new_stackp = args->stack;
 	unsigned long tls = args->tls;
 	struct fake_frame
diff --git a/arch/s390/kernel/topology.c b/arch/s390/kernel/topology.c
index 46569b8e47dd..1594c80e9bc4 100644
--- a/arch/s390/kernel/topology.c
+++ b/arch/s390/kernel/topology.c
@@ -509,33 +509,27 @@ int topology_cpu_init(struct cpu *cpu)
 	return rc;
 }
 
-static const struct cpumask *cpu_thread_mask(int cpu)
-{
-	return &cpu_topology[cpu].thread_mask;
-}
-
-
 const struct cpumask *cpu_coregroup_mask(int cpu)
 {
 	return &cpu_topology[cpu].core_mask;
 }
 
-static const struct cpumask *cpu_book_mask(int cpu)
+static const struct cpumask *tl_book_mask(struct sched_domain_topology_level *tl, int cpu)
 {
 	return &cpu_topology[cpu].book_mask;
 }
 
-static const struct cpumask *cpu_drawer_mask(int cpu)
+static const struct cpumask *tl_drawer_mask(struct sched_domain_topology_level *tl, int cpu)
 {
 	return &cpu_topology[cpu].drawer_mask;
 }
 
 static struct sched_domain_topology_level s390_topology[] = {
-	SDTL_INIT(cpu_thread_mask, cpu_smt_flags, SMT),
-	SDTL_INIT(cpu_coregroup_mask, cpu_core_flags, MC),
-	SDTL_INIT(cpu_book_mask, NULL, BOOK),
-	SDTL_INIT(cpu_drawer_mask, NULL, DRAWER),
-	SDTL_INIT(cpu_cpu_mask, NULL, PKG),
+	SDTL_INIT(tl_smt_mask, cpu_smt_flags, SMT),
+	SDTL_INIT(tl_mc_mask, cpu_core_flags, MC),
+	SDTL_INIT(tl_book_mask, NULL, BOOK),
+	SDTL_INIT(tl_drawer_mask, NULL, DRAWER),
+	SDTL_INIT(tl_pkg_mask, NULL, PKG),
 	{ NULL, },
 };
 
diff --git a/arch/s390/kernel/vmlinux.lds.S b/arch/s390/kernel/vmlinux.lds.S
index 1c606dfa595d..feecf1a6ddb4 100644
--- a/arch/s390/kernel/vmlinux.lds.S
+++ b/arch/s390/kernel/vmlinux.lds.S
@@ -209,6 +209,11 @@ SECTIONS
 	. = ALIGN(PAGE_SIZE);
 	_end = . ;
 
+	/* Debugging sections.	*/
+	STABS_DEBUG
+	DWARF_DEBUG
+	ELF_DETAILS
+
 	/*
 	 * uncompressed image info used by the decompressor
 	 * it should match struct vmlinux_info
@@ -239,11 +244,6 @@ SECTIONS
 #endif
 	} :NONE
 
-	/* Debugging sections.	*/
-	STABS_DEBUG
-	DWARF_DEBUG
-	ELF_DETAILS
-
 	/*
 	 * Make sure that the .got.plt is either completely empty or it
 	 * contains only the three reserved double words.
diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c
index 2a92a8b9e4c2..9384572ffa7b 100644
--- a/arch/s390/kvm/interrupt.c
+++ b/arch/s390/kvm/interrupt.c
@@ -2778,12 +2778,19 @@ static unsigned long get_ind_bit(__u64 addr, unsigned long bit_nr, bool swap)
 
 static struct page *get_map_page(struct kvm *kvm, u64 uaddr)
 {
+	struct mm_struct *mm = kvm->mm;
 	struct page *page = NULL;
+	int locked = 1;
+
+	if (mmget_not_zero(mm)) {
+		mmap_read_lock(mm);
+		get_user_pages_remote(mm, uaddr, 1, FOLL_WRITE,
+				      &page, &locked);
+		if (locked)
+			mmap_read_unlock(mm);
+		mmput(mm);
+	}
 
-	mmap_read_lock(kvm->mm);
-	get_user_pages_remote(kvm->mm, uaddr, 1, FOLL_WRITE,
-			      &page, NULL);
-	mmap_read_unlock(kvm->mm);
 	return page;
 }
 
diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c
index bf6fa8b9ca73..6d51aa5f66be 100644
--- a/arch/s390/kvm/kvm-s390.c
+++ b/arch/s390/kvm/kvm-s390.c
@@ -4864,12 +4864,12 @@ static void kvm_s390_assert_primary_as(struct kvm_vcpu *vcpu)
  * @vcpu: the vCPU whose gmap is to be fixed up
  * @gfn: the guest frame number used for memslots (including fake memslots)
  * @gaddr: the gmap address, does not have to match @gfn for ucontrol gmaps
- * @flags: FOLL_* flags
+ * @foll: FOLL_* flags
  *
  * Return: 0 on success, < 0 in case of error.
  * Context: The mm lock must not be held before calling. May sleep.
  */
-int __kvm_s390_handle_dat_fault(struct kvm_vcpu *vcpu, gfn_t gfn, gpa_t gaddr, unsigned int flags)
+int __kvm_s390_handle_dat_fault(struct kvm_vcpu *vcpu, gfn_t gfn, gpa_t gaddr, unsigned int foll)
 {
 	struct kvm_memory_slot *slot;
 	unsigned int fault_flags;
@@ -4883,13 +4883,13 @@ int __kvm_s390_handle_dat_fault(struct kvm_vcpu *vcpu, gfn_t gfn, gpa_t gaddr, u
 	if (!slot || slot->flags & KVM_MEMSLOT_INVALID)
 		return vcpu_post_run_addressing_exception(vcpu);
 
-	fault_flags = flags & FOLL_WRITE ? FAULT_FLAG_WRITE : 0;
+	fault_flags = foll & FOLL_WRITE ? FAULT_FLAG_WRITE : 0;
 	if (vcpu->arch.gmap->pfault_enabled)
-		flags |= FOLL_NOWAIT;
+		foll |= FOLL_NOWAIT;
 	vmaddr = __gfn_to_hva_memslot(slot, gfn);
 
 try_again:
-	pfn = __kvm_faultin_pfn(slot, gfn, flags, &writable, &page);
+	pfn = __kvm_faultin_pfn(slot, gfn, foll, &writable, &page);
 
 	/* Access outside memory, inject addressing exception */
 	if (is_noslot_pfn(pfn))
@@ -4905,7 +4905,7 @@ try_again:
 			return 0;
 		vcpu->stat.pfault_sync++;
 		/* Could not setup async pfault, try again synchronously */
-		flags &= ~FOLL_NOWAIT;
+		foll &= ~FOLL_NOWAIT;
 		goto try_again;
 	}
 	/* Any other error */
@@ -4925,7 +4925,7 @@ try_again:
 	return rc;
 }
 
-static int vcpu_dat_fault_handler(struct kvm_vcpu *vcpu, unsigned long gaddr, unsigned int flags)
+static int vcpu_dat_fault_handler(struct kvm_vcpu *vcpu, unsigned long gaddr, unsigned int foll)
 {
 	unsigned long gaddr_tmp;
 	gfn_t gfn;
@@ -4950,18 +4950,18 @@ static int vcpu_dat_fault_handler(struct kvm_vcpu *vcpu, unsigned long gaddr, un
 		}
 		gfn = gpa_to_gfn(gaddr_tmp);
 	}
-	return __kvm_s390_handle_dat_fault(vcpu, gfn, gaddr, flags);
+	return __kvm_s390_handle_dat_fault(vcpu, gfn, gaddr, foll);
 }
 
 static int vcpu_post_run_handle_fault(struct kvm_vcpu *vcpu)
 {
-	unsigned int flags = 0;
+	unsigned int foll = 0;
 	unsigned long gaddr;
 	int rc;
 
 	gaddr = current->thread.gmap_teid.addr * PAGE_SIZE;
 	if (kvm_s390_cur_gmap_fault_is_write())
-		flags = FAULT_FLAG_WRITE;
+		foll = FOLL_WRITE;
 
 	switch (current->thread.gmap_int_code & PGM_INT_CODE_MASK) {
 	case 0:
@@ -5003,7 +5003,7 @@ static int vcpu_post_run_handle_fault(struct kvm_vcpu *vcpu)
 			send_sig(SIGSEGV, current, 0);
 		if (rc != -ENXIO)
 			break;
-		flags = FAULT_FLAG_WRITE;
+		foll = FOLL_WRITE;
 		fallthrough;
 	case PGM_PROTECTION:
 	case PGM_SEGMENT_TRANSLATION:
@@ -5013,7 +5013,7 @@ static int vcpu_post_run_handle_fault(struct kvm_vcpu *vcpu)
 	case PGM_REGION_SECOND_TRANS:
 	case PGM_REGION_THIRD_TRANS:
 		kvm_s390_assert_primary_as(vcpu);
-		return vcpu_dat_fault_handler(vcpu, gaddr, flags);
+		return vcpu_dat_fault_handler(vcpu, gaddr, foll);
 	default:
 		KVM_BUG(1, vcpu->kvm, "Unexpected program interrupt 0x%x, TEID 0x%016lx",
 			current->thread.gmap_int_code, current->thread.gmap_teid.val);
diff --git a/arch/s390/kvm/pv.c b/arch/s390/kvm/pv.c
index 25ede8354514..6ba5a0305e25 100644
--- a/arch/s390/kvm/pv.c
+++ b/arch/s390/kvm/pv.c
@@ -624,6 +624,17 @@ int kvm_s390_pv_init_vm(struct kvm *kvm, u16 *rc, u16 *rrc)
 	int cc, ret;
 	u16 dummy;
 
+	/* Add the notifier only once. No races because we hold kvm->lock */
+	if (kvm->arch.pv.mmu_notifier.ops != &kvm_s390_pv_mmu_notifier_ops) {
+		/* The notifier will be unregistered when the VM is destroyed */
+		kvm->arch.pv.mmu_notifier.ops = &kvm_s390_pv_mmu_notifier_ops;
+		ret = mmu_notifier_register(&kvm->arch.pv.mmu_notifier, kvm->mm);
+		if (ret) {
+			kvm->arch.pv.mmu_notifier.ops = NULL;
+			return ret;
+		}
+	}
+
 	ret = kvm_s390_pv_alloc_vm(kvm);
 	if (ret)
 		return ret;
@@ -659,11 +670,6 @@ int kvm_s390_pv_init_vm(struct kvm *kvm, u16 *rc, u16 *rrc)
 		return -EIO;
 	}
 	kvm->arch.gmap->guest_handle = uvcb.guest_handle;
-	/* Add the notifier only once. No races because we hold kvm->lock */
-	if (kvm->arch.pv.mmu_notifier.ops != &kvm_s390_pv_mmu_notifier_ops) {
-		kvm->arch.pv.mmu_notifier.ops = &kvm_s390_pv_mmu_notifier_ops;
-		mmu_notifier_register(&kvm->arch.pv.mmu_notifier, kvm->mm);
-	}
 	return 0;
 }
 
diff --git a/arch/s390/mm/pgalloc.c b/arch/s390/mm/pgalloc.c
index d2f6f1f6d2fc..36700384fe6b 100644
--- a/arch/s390/mm/pgalloc.c
+++ b/arch/s390/mm/pgalloc.c
@@ -14,11 +14,15 @@
 #include <asm/pgalloc.h>
 #include <asm/tlbflush.h>
 
-unsigned long *crst_table_alloc(struct mm_struct *mm)
+unsigned long *crst_table_alloc_noprof(struct mm_struct *mm)
 {
-	struct ptdesc *ptdesc = pagetable_alloc(GFP_KERNEL, CRST_ALLOC_ORDER);
+	gfp_t gfp = GFP_KERNEL_ACCOUNT;
+	struct ptdesc *ptdesc;
 	unsigned long *table;
 
+	if (mm == &init_mm)
+		gfp &= ~__GFP_ACCOUNT;
+	ptdesc = pagetable_alloc_noprof(gfp, CRST_ALLOC_ORDER);
 	if (!ptdesc)
 		return NULL;
 	table = ptdesc_to_virt(ptdesc);
@@ -112,12 +116,12 @@ err_p4d:
 
 #ifdef CONFIG_PGSTE
 
-struct ptdesc *page_table_alloc_pgste(struct mm_struct *mm)
+struct ptdesc *page_table_alloc_pgste_noprof(struct mm_struct *mm)
 {
 	struct ptdesc *ptdesc;
 	u64 *table;
 
-	ptdesc = pagetable_alloc(GFP_KERNEL, 0);
+	ptdesc = pagetable_alloc_noprof(GFP_KERNEL_ACCOUNT, 0);
 	if (ptdesc) {
 		table = (u64 *)ptdesc_to_virt(ptdesc);
 		__arch_set_page_dat(table, 1);
@@ -134,12 +138,15 @@ void page_table_free_pgste(struct ptdesc *ptdesc)
 
 #endif /* CONFIG_PGSTE */
 
-unsigned long *page_table_alloc(struct mm_struct *mm)
+unsigned long *page_table_alloc_noprof(struct mm_struct *mm)
 {
+	gfp_t gfp = GFP_KERNEL_ACCOUNT;
 	struct ptdesc *ptdesc;
 	unsigned long *table;
 
-	ptdesc = pagetable_alloc(GFP_KERNEL, 0);
+	if (mm == &init_mm)
+		gfp &= ~__GFP_ACCOUNT;
+	ptdesc = pagetable_alloc_noprof(gfp, 0);
 	if (!ptdesc)
 		return NULL;
 	if (!pagetable_pte_ctor(mm, ptdesc)) {
diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c
index 60688be4e876..50eb57c976bc 100644
--- a/arch/s390/mm/pgtable.c
+++ b/arch/s390/mm/pgtable.c
@@ -335,7 +335,6 @@ pte_t ptep_modify_prot_start(struct vm_area_struct *vma, unsigned long addr,
 	int nodat;
 	struct mm_struct *mm = vma->vm_mm;
 
-	preempt_disable();
 	pgste = ptep_xchg_start(mm, addr, ptep);
 	nodat = !!(pgste_val(pgste) & _PGSTE_GPS_NODAT);
 	old = ptep_flush_lazy(mm, addr, ptep, nodat);
@@ -360,7 +359,6 @@ void ptep_modify_prot_commit(struct vm_area_struct *vma, unsigned long addr,
 	} else {
 		set_pte(ptep, pte);
 	}
-	preempt_enable();
 }
 
 static inline void pmdp_idte_local(struct mm_struct *mm,
diff --git a/arch/s390/net/Makefile b/arch/s390/net/Makefile
index 8cab6deb0403..9275cf63192a 100644
--- a/arch/s390/net/Makefile
+++ b/arch/s390/net/Makefile
@@ -2,5 +2,5 @@
 #
 # Arch-specific network modules
 #
-obj-$(CONFIG_BPF_JIT) += bpf_jit_comp.o
+obj-$(CONFIG_BPF_JIT) += bpf_jit_comp.o bpf_timed_may_goto.o
 obj-$(CONFIG_HAVE_PNETID) += pnet.o
diff --git a/arch/s390/net/bpf_jit_comp.c b/arch/s390/net/bpf_jit_comp.c
index bb17efe29d65..cf461d76e9da 100644
--- a/arch/s390/net/bpf_jit_comp.c
+++ b/arch/s390/net/bpf_jit_comp.c
@@ -675,20 +675,6 @@ static void bpf_jit_prologue(struct bpf_jit *jit, struct bpf_prog *fp)
 } while (0)
 
 /*
- * Call r1 either directly or via __s390_indirect_jump_r1 thunk
- */
-static void call_r1(struct bpf_jit *jit)
-{
-	if (nospec_uses_trampoline())
-		/* brasl %r14,__s390_indirect_jump_r1 */
-		EMIT6_PCREL_RILB_PTR(0xc0050000, REG_14,
-				     __s390_indirect_jump_r1);
-	else
-		/* basr %r14,%r1 */
-		EMIT2(0x0d00, REG_14, REG_1);
-}
-
-/*
  * Function epilogue
  */
 static void bpf_jit_epilogue(struct bpf_jit *jit)
@@ -1790,20 +1776,21 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp,
 
 		REG_SET_SEEN(BPF_REG_5);
 		jit->seen |= SEEN_FUNC;
+
 		/*
 		 * Copy the tail call counter to where the callee expects it.
-		 *
-		 * Note 1: The callee can increment the tail call counter, but
-		 * we do not load it back, since the x86 JIT does not do this
-		 * either.
-		 *
-		 * Note 2: We assume that the verifier does not let us call the
-		 * main program, which clears the tail call counter on entry.
 		 */
-		/* mvc tail_call_cnt(4,%r15),frame_off+tail_call_cnt(%r15) */
-		_EMIT6(0xd203f000 | offsetof(struct prog_frame, tail_call_cnt),
-		       0xf000 | (jit->frame_off +
-				 offsetof(struct prog_frame, tail_call_cnt)));
+
+		if (insn->src_reg == BPF_PSEUDO_CALL)
+			/*
+			 * mvc tail_call_cnt(4,%r15),
+			 *     frame_off+tail_call_cnt(%r15)
+			 */
+			_EMIT6(0xd203f000 | offsetof(struct prog_frame,
+						     tail_call_cnt),
+			       0xf000 | (jit->frame_off +
+					 offsetof(struct prog_frame,
+						  tail_call_cnt)));
 
 		/* Sign-extend the kfunc arguments. */
 		if (insn->src_reg == BPF_PSEUDO_KFUNC_CALL) {
@@ -1819,12 +1806,38 @@ static noinline int bpf_jit_insn(struct bpf_jit *jit, struct bpf_prog *fp,
 			}
 		}
 
-		/* lgrl %w1,func */
-		EMIT6_PCREL_RILB(0xc4080000, REG_W1, _EMIT_CONST_U64(func));
-		/* %r1() */
-		call_r1(jit);
-		/* lgr %b0,%r2: load return value into %b0 */
-		EMIT4(0xb9040000, BPF_REG_0, REG_2);
+		if ((void *)func == arch_bpf_timed_may_goto) {
+			/*
+			 * arch_bpf_timed_may_goto() has a special ABI: the
+			 * parameters are in BPF_REG_AX and BPF_REG_10; the
+			 * return value is in BPF_REG_AX; and all GPRs except
+			 * REG_W0, REG_W1, and BPF_REG_AX are callee-saved.
+			 */
+
+			/* brasl %r0,func */
+			EMIT6_PCREL_RILB_PTR(0xc0050000, REG_0, (void *)func);
+		} else {
+			/* brasl %r14,func */
+			EMIT6_PCREL_RILB_PTR(0xc0050000, REG_14, (void *)func);
+			/* lgr %b0,%r2: load return value into %b0 */
+			EMIT4(0xb9040000, BPF_REG_0, REG_2);
+		}
+
+		/*
+		 * Copy the potentially updated tail call counter back.
+		 */
+
+		if (insn->src_reg == BPF_PSEUDO_CALL)
+			/*
+			 * mvc frame_off+tail_call_cnt(%r15),
+			 *     tail_call_cnt(4,%r15)
+			 */
+			_EMIT6(0xd203f000 | (jit->frame_off +
+					     offsetof(struct prog_frame,
+						      tail_call_cnt)),
+			       0xf000 | offsetof(struct prog_frame,
+						 tail_call_cnt));
+
 		break;
 	}
 	case BPF_JMP | BPF_TAIL_CALL: {
@@ -2517,14 +2530,12 @@ static int invoke_bpf_prog(struct bpf_tramp_jit *tjit,
 	 *         goto skip;
 	 */
 
-	/* %r1 = __bpf_prog_enter */
-	load_imm64(jit, REG_1, (u64)bpf_trampoline_enter(p));
 	/* %r2 = p */
 	load_imm64(jit, REG_2, (u64)p);
 	/* la %r3,run_ctx_off(%r15) */
 	EMIT4_DISP(0x41000000, REG_3, REG_15, tjit->run_ctx_off);
-	/* %r1() */
-	call_r1(jit);
+	/* brasl %r14,__bpf_prog_enter */
+	EMIT6_PCREL_RILB_PTR(0xc0050000, REG_14, bpf_trampoline_enter(p));
 	/* ltgr %r7,%r2 */
 	EMIT4(0xb9020000, REG_7, REG_2);
 	/* brcl 8,skip */
@@ -2535,15 +2546,13 @@ static int invoke_bpf_prog(struct bpf_tramp_jit *tjit,
 	 * retval = bpf_func(args, p->insnsi);
 	 */
 
-	/* %r1 = p->bpf_func */
-	load_imm64(jit, REG_1, (u64)p->bpf_func);
 	/* la %r2,bpf_args_off(%r15) */
 	EMIT4_DISP(0x41000000, REG_2, REG_15, tjit->bpf_args_off);
 	/* %r3 = p->insnsi */
 	if (!p->jited)
 		load_imm64(jit, REG_3, (u64)p->insnsi);
-	/* %r1() */
-	call_r1(jit);
+	/* brasl %r14,p->bpf_func */
+	EMIT6_PCREL_RILB_PTR(0xc0050000, REG_14, p->bpf_func);
 	/* stg %r2,retval_off(%r15) */
 	if (save_ret) {
 		if (sign_extend(jit, REG_2, m->ret_size, m->ret_flags))
@@ -2560,16 +2569,14 @@ static int invoke_bpf_prog(struct bpf_tramp_jit *tjit,
 	 * __bpf_prog_exit(p, start, &run_ctx);
 	 */
 
-	/* %r1 = __bpf_prog_exit */
-	load_imm64(jit, REG_1, (u64)bpf_trampoline_exit(p));
 	/* %r2 = p */
 	load_imm64(jit, REG_2, (u64)p);
 	/* lgr %r3,%r7 */
 	EMIT4(0xb9040000, REG_3, REG_7);
 	/* la %r4,run_ctx_off(%r15) */
 	EMIT4_DISP(0x41000000, REG_4, REG_15, tjit->run_ctx_off);
-	/* %r1() */
-	call_r1(jit);
+	/* brasl %r14,__bpf_prog_exit */
+	EMIT6_PCREL_RILB_PTR(0xc0050000, REG_14, bpf_trampoline_exit(p));
 
 	return 0;
 }
@@ -2729,9 +2736,6 @@ static int __arch_prepare_bpf_trampoline(struct bpf_tramp_image *im,
 
 		/* lgr %r8,%r0 */
 		EMIT4(0xb9040000, REG_8, REG_0);
-	} else {
-		/* %r8 = func_addr + S390X_PATCH_SIZE */
-		load_imm64(jit, REG_8, (u64)func_addr + S390X_PATCH_SIZE);
 	}
 
 	/*
@@ -2757,12 +2761,10 @@ static int __arch_prepare_bpf_trampoline(struct bpf_tramp_image *im,
 		 * __bpf_tramp_enter(im);
 		 */
 
-		/* %r1 = __bpf_tramp_enter */
-		load_imm64(jit, REG_1, (u64)__bpf_tramp_enter);
 		/* %r2 = im */
 		load_imm64(jit, REG_2, (u64)im);
-		/* %r1() */
-		call_r1(jit);
+		/* brasl %r14,__bpf_tramp_enter */
+		EMIT6_PCREL_RILB_PTR(0xc0050000, REG_14, __bpf_tramp_enter);
 	}
 
 	for (i = 0; i < fentry->nr_links; i++)
@@ -2815,13 +2817,25 @@ static int __arch_prepare_bpf_trampoline(struct bpf_tramp_image *im,
 		/* mvc tail_call_cnt(4,%r15),tccnt_off(%r15) */
 		_EMIT6(0xd203f000 | offsetof(struct prog_frame, tail_call_cnt),
 		       0xf000 | tjit->tccnt_off);
-		/* lgr %r1,%r8 */
-		EMIT4(0xb9040000, REG_1, REG_8);
-		/* %r1() */
-		call_r1(jit);
+		if (flags & BPF_TRAMP_F_ORIG_STACK) {
+			if (nospec_uses_trampoline())
+				/* brasl %r14,__s390_indirect_jump_r8 */
+				EMIT6_PCREL_RILB_PTR(0xc0050000, REG_14,
+						     __s390_indirect_jump_r8);
+			else
+				/* basr %r14,%r8 */
+				EMIT2(0x0d00, REG_14, REG_8);
+		} else {
+			/* brasl %r14,func_addr+S390X_PATCH_SIZE */
+			EMIT6_PCREL_RILB_PTR(0xc0050000, REG_14,
+					     func_addr + S390X_PATCH_SIZE);
+		}
 		/* stg %r2,retval_off(%r15) */
 		EMIT6_DISP_LH(0xe3000000, 0x0024, REG_2, REG_0, REG_15,
 			      tjit->retval_off);
+		/* mvc tccnt_off(%r15),tail_call_cnt(4,%r15) */
+		_EMIT6(0xd203f000 | tjit->tccnt_off,
+		       0xf000 | offsetof(struct prog_frame, tail_call_cnt));
 
 		im->ip_after_call = jit->prg_buf + jit->prg;
 
@@ -2846,12 +2860,10 @@ static int __arch_prepare_bpf_trampoline(struct bpf_tramp_image *im,
 		 * __bpf_tramp_exit(im);
 		 */
 
-		/* %r1 = __bpf_tramp_exit */
-		load_imm64(jit, REG_1, (u64)__bpf_tramp_exit);
 		/* %r2 = im */
 		load_imm64(jit, REG_2, (u64)im);
-		/* %r1() */
-		call_r1(jit);
+		/* brasl %r14,__bpf_tramp_exit */
+		EMIT6_PCREL_RILB_PTR(0xc0050000, REG_14, __bpf_tramp_exit);
 	}
 
 	/* lmg %r2,%rN,reg_args_off(%r15) */
@@ -2860,7 +2872,8 @@ static int __arch_prepare_bpf_trampoline(struct bpf_tramp_image *im,
 			      REG_2 + (nr_reg_args - 1), REG_15,
 			      tjit->reg_args_off);
 	/* lgr %r1,%r8 */
-	if (!(flags & BPF_TRAMP_F_SKIP_FRAME))
+	if (!(flags & BPF_TRAMP_F_SKIP_FRAME) &&
+	    (flags & BPF_TRAMP_F_ORIG_STACK))
 		EMIT4(0xb9040000, REG_1, REG_8);
 	/* lmg %r7,%r8,r7_r8_off(%r15) */
 	EMIT6_DISP_LH(0xeb000000, 0x0004, REG_7, REG_8, REG_15,
@@ -2879,9 +2892,12 @@ static int __arch_prepare_bpf_trampoline(struct bpf_tramp_image *im,
 	EMIT4_IMM(0xa70b0000, REG_15, tjit->stack_size);
 	if (flags & BPF_TRAMP_F_SKIP_FRAME)
 		EMIT_JUMP_REG(14);
-	else
+	else if (flags & BPF_TRAMP_F_ORIG_STACK)
 		EMIT_JUMP_REG(1);
-
+	else
+		/* brcl 0xf,func_addr+S390X_PATCH_SIZE */
+		EMIT6_PCREL_RILC_PTR(0xc0040000, 0xf,
+				     func_addr + S390X_PATCH_SIZE);
 	return 0;
 }
 
@@ -2951,6 +2967,11 @@ bool bpf_jit_supports_insn(struct bpf_insn *insn, bool in_arena)
 	case BPF_STX | BPF_ATOMIC | BPF_DW:
 		if (bpf_atomic_is_load_store(insn))
 			return false;
+		break;
+	case BPF_LDX | BPF_MEMSX | BPF_B:
+	case BPF_LDX | BPF_MEMSX | BPF_H:
+	case BPF_LDX | BPF_MEMSX | BPF_W:
+		return false;
 	}
 	return true;
 }
@@ -2989,3 +3010,8 @@ void arch_bpf_stack_walk(bool (*consume_fn)(void *, u64, u64, u64),
 		prev_addr = addr;
 	}
 }
+
+bool bpf_jit_supports_timed_may_goto(void)
+{
+	return true;
+}
diff --git a/arch/s390/net/bpf_timed_may_goto.S b/arch/s390/net/bpf_timed_may_goto.S
new file mode 100644
index 000000000000..06f567a460d7
--- /dev/null
+++ b/arch/s390/net/bpf_timed_may_goto.S
@@ -0,0 +1,45 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#include <linux/export.h>
+#include <linux/linkage.h>
+#include <asm/asm-offsets.h>
+#include <asm/nospec-insn.h>
+
+#define R2_OFF 0
+#define R5_OFF (R2_OFF + (5 - 2 + 1) * 8)
+#define R14_OFF (R5_OFF + 8)
+#define RETADDR_OFF (R14_OFF + 8)
+#define R15_OFF (RETADDR_OFF + 8)
+#define BACKCHAIN_OFF (R15_OFF + 8)
+#define FRAME_SIZE (BACKCHAIN_OFF + 8)
+#define FRAME_OFF (STACK_FRAME_OVERHEAD - FRAME_SIZE)
+#if (FRAME_OFF + BACKCHAIN_OFF) != __SF_BACKCHAIN
+#error Stack frame layout calculation is broken
+#endif
+
+	GEN_BR_THUNK %r1
+
+SYM_FUNC_START(arch_bpf_timed_may_goto)
+	/*
+	 * This function has a special ABI: the parameters are in %r12 and
+	 * %r13; the return value is in %r12; all GPRs except %r0, %r1, and
+	 * %r12 are callee-saved; and the return address is in %r0.
+	 */
+	stmg %r2,%r5,FRAME_OFF+R2_OFF(%r15)
+	stg %r14,FRAME_OFF+R14_OFF(%r15)
+	stg %r0,FRAME_OFF+RETADDR_OFF(%r15)
+	stg %r15,FRAME_OFF+R15_OFF(%r15)
+	lgr %r1,%r15
+	lay %r15,-FRAME_SIZE(%r15)
+	stg %r1,__SF_BACKCHAIN(%r15)
+
+	lay %r2,0(%r12,%r13)
+	brasl %r14,bpf_check_timed_may_goto
+	lgr %r12,%r2
+
+	lg %r15,FRAME_SIZE+FRAME_OFF+R15_OFF(%r15)
+	lmg %r2,%r5,FRAME_OFF+R2_OFF(%r15)
+	lg %r14,FRAME_OFF+R14_OFF(%r15)
+	lg %r1,FRAME_OFF+RETADDR_OFF(%r15)
+	BR_EX %r1
+SYM_FUNC_END(arch_bpf_timed_may_goto)
diff --git a/arch/sh/include/asm/bitops.h b/arch/sh/include/asm/bitops.h
index 10ceb0d6b5a9..aba3aa96a50e 100644
--- a/arch/sh/include/asm/bitops.h
+++ b/arch/sh/include/asm/bitops.h
@@ -24,7 +24,7 @@
 #include <asm-generic/bitops/non-atomic.h>
 #endif
 
-static inline unsigned long ffz(unsigned long word)
+static inline unsigned long __attribute_const__ ffz(unsigned long word)
 {
 	unsigned long result;
 
@@ -44,7 +44,7 @@ static inline unsigned long ffz(unsigned long word)
  *
  * Undefined if no bit exists, so code should check against 0 first.
  */
-static inline unsigned long __ffs(unsigned long word)
+static inline __attribute_const__ unsigned long __ffs(unsigned long word)
 {
 	unsigned long result;
 
diff --git a/arch/sh/kernel/asm-offsets.c b/arch/sh/kernel/asm-offsets.c
index a0322e832845..429b6a763146 100644
--- a/arch/sh/kernel/asm-offsets.c
+++ b/arch/sh/kernel/asm-offsets.c
@@ -8,6 +8,7 @@
  * compile this file to assembler, and then extract the
  * #defines from the assembly-language output.
  */
+#define COMPILE_OFFSETS
 
 #include <linux/stddef.h>
 #include <linux/types.h>
diff --git a/arch/sh/kernel/process_32.c b/arch/sh/kernel/process_32.c
index 92b6649d4929..62f753a85b89 100644
--- a/arch/sh/kernel/process_32.c
+++ b/arch/sh/kernel/process_32.c
@@ -89,7 +89,7 @@ asmlinkage void ret_from_kernel_thread(void);
 
 int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
-	unsigned long clone_flags = args->flags;
+	u64 clone_flags = args->flags;
 	unsigned long usp = args->stack;
 	unsigned long tls = args->tls;
 	struct thread_info *ti = task_thread_info(p);
diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig
index 7b595092cbfb..a630d373e645 100644
--- a/arch/sparc/Kconfig
+++ b/arch/sparc/Kconfig
@@ -110,6 +110,8 @@ config SPARC64
 	select HAVE_SETUP_PER_CPU_AREA
 	select NEED_PER_CPU_EMBED_FIRST_CHUNK
 	select NEED_PER_CPU_PAGE_FIRST_CHUNK
+	select ARCH_SUPPORTS_SCHED_SMT if SMP
+	select ARCH_SUPPORTS_SCHED_MC  if SMP
 
 config ARCH_PROC_KCORE_TEXT
 	def_bool y
@@ -288,24 +290,6 @@ if SPARC64 || COMPILE_TEST
 source "kernel/power/Kconfig"
 endif
 
-config SCHED_SMT
-	bool "SMT (Hyperthreading) scheduler support"
-	depends on SPARC64 && SMP
-	default y
-	help
-	  SMT scheduler support improves the CPU scheduler's decision making
-	  when dealing with SPARC cpus at a cost of slightly increased overhead
-	  in some places. If unsure say N here.
-
-config SCHED_MC
-	bool "Multi-core scheduler support"
-	depends on SPARC64 && SMP
-	default y
-	help
-	  Multi-core scheduler support improves the CPU scheduler's decision
-	  making when dealing with multi-core CPU chips at a cost of slightly
-	  increased overhead in some places. If unsure say N here.
-
 config CMDLINE_BOOL
 	bool "Default bootloader kernel arguments"
 	depends on SPARC64
diff --git a/arch/sparc/crypto/Kconfig b/arch/sparc/crypto/Kconfig
index f5b2e720fec3..f755da979534 100644
--- a/arch/sparc/crypto/Kconfig
+++ b/arch/sparc/crypto/Kconfig
@@ -16,16 +16,6 @@ config CRYPTO_DES_SPARC64
 
 	  Architecture: sparc64
 
-config CRYPTO_MD5_SPARC64
-	tristate "Digests: MD5"
-	depends on SPARC64
-	select CRYPTO_MD5
-	select CRYPTO_HASH
-	help
-	  MD5 message digest algorithm (RFC1321)
-
-	  Architecture: sparc64 using crypto instructions, when available
-
 config CRYPTO_AES_SPARC64
 	tristate "Ciphers: AES, modes: ECB, CBC, CTR"
 	depends on SPARC64
diff --git a/arch/sparc/crypto/Makefile b/arch/sparc/crypto/Makefile
index 0d05a17988c4..7b4796842ddd 100644
--- a/arch/sparc/crypto/Makefile
+++ b/arch/sparc/crypto/Makefile
@@ -3,14 +3,10 @@
 # Arch-specific CryptoAPI modules.
 #
 
-obj-$(CONFIG_CRYPTO_MD5_SPARC64) += md5-sparc64.o
-
 obj-$(CONFIG_CRYPTO_AES_SPARC64) += aes-sparc64.o
 obj-$(CONFIG_CRYPTO_DES_SPARC64) += des-sparc64.o
 obj-$(CONFIG_CRYPTO_CAMELLIA_SPARC64) += camellia-sparc64.o
 
-md5-sparc64-y := md5_asm.o md5_glue.o
-
 aes-sparc64-y := aes_asm.o aes_glue.o
 des-sparc64-y := des_asm.o des_glue.o
 camellia-sparc64-y := camellia_asm.o camellia_glue.o
diff --git a/arch/sparc/crypto/md5_asm.S b/arch/sparc/crypto/md5_asm.S
deleted file mode 100644
index 60b544e4d205..000000000000
--- a/arch/sparc/crypto/md5_asm.S
+++ /dev/null
@@ -1,70 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#include <linux/linkage.h>
-#include <asm/opcodes.h>
-#include <asm/visasm.h>
-
-ENTRY(md5_sparc64_transform)
-	/* %o0 = digest, %o1 = data, %o2 = rounds */
-	VISEntryHalf
-	ld	[%o0 + 0x00], %f0
-	ld	[%o0 + 0x04], %f1
-	andcc	%o1, 0x7, %g0
-	ld	[%o0 + 0x08], %f2
-	bne,pn	%xcc, 10f
-	 ld	[%o0 + 0x0c], %f3
-
-1:
-	ldd	[%o1 + 0x00], %f8
-	ldd	[%o1 + 0x08], %f10
-	ldd	[%o1 + 0x10], %f12
-	ldd	[%o1 + 0x18], %f14
-	ldd	[%o1 + 0x20], %f16
-	ldd	[%o1 + 0x28], %f18
-	ldd	[%o1 + 0x30], %f20
-	ldd	[%o1 + 0x38], %f22
-
-	MD5
-
-	subcc	%o2, 1, %o2
-	bne,pt	%xcc, 1b
-	 add	%o1, 0x40, %o1
-
-5:
-	st	%f0, [%o0 + 0x00]
-	st	%f1, [%o0 + 0x04]
-	st	%f2, [%o0 + 0x08]
-	st	%f3, [%o0 + 0x0c]
-	retl
-	 VISExitHalf
-10:
-	alignaddr %o1, %g0, %o1
-
-	ldd	[%o1 + 0x00], %f10
-1:
-	ldd	[%o1 + 0x08], %f12
-	ldd	[%o1 + 0x10], %f14
-	ldd	[%o1 + 0x18], %f16
-	ldd	[%o1 + 0x20], %f18
-	ldd	[%o1 + 0x28], %f20
-	ldd	[%o1 + 0x30], %f22
-	ldd	[%o1 + 0x38], %f24
-	ldd	[%o1 + 0x40], %f26
-
-	faligndata %f10, %f12, %f8
-	faligndata %f12, %f14, %f10
-	faligndata %f14, %f16, %f12
-	faligndata %f16, %f18, %f14
-	faligndata %f18, %f20, %f16
-	faligndata %f20, %f22, %f18
-	faligndata %f22, %f24, %f20
-	faligndata %f24, %f26, %f22
-
-	MD5
-
-	subcc	%o2, 1, %o2
-	fsrc2	%f26, %f10
-	bne,pt	%xcc, 1b
-	 add	%o1, 0x40, %o1
-
-	ba,a,pt	%xcc, 5b
-ENDPROC(md5_sparc64_transform)
diff --git a/arch/sparc/crypto/md5_glue.c b/arch/sparc/crypto/md5_glue.c
deleted file mode 100644
index b3615f0cdf62..000000000000
--- a/arch/sparc/crypto/md5_glue.c
+++ /dev/null
@@ -1,174 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/* Glue code for MD5 hashing optimized for sparc64 crypto opcodes.
- *
- * This is based largely upon arch/x86/crypto/sha1_ssse3_glue.c
- * and crypto/md5.c which are:
- *
- * Copyright (c) Alan Smithee.
- * Copyright (c) Andrew McDonald <andrew@mcdonald.org.uk>
- * Copyright (c) Jean-Francois Dive <jef@linuxbe.org>
- * Copyright (c) Mathias Krause <minipli@googlemail.com>
- * Copyright (c) Cryptoapi developers.
- * Copyright (c) 2002 James Morris <jmorris@intercode.com.au>
- */
-
-#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
-
-#include <asm/elf.h>
-#include <asm/opcodes.h>
-#include <asm/pstate.h>
-#include <crypto/internal/hash.h>
-#include <crypto/md5.h>
-#include <linux/errno.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/unaligned.h>
-
-struct sparc_md5_state {
-	__le32 hash[MD5_HASH_WORDS];
-	u64 byte_count;
-};
-
-asmlinkage void md5_sparc64_transform(__le32 *digest, const char *data,
-				      unsigned int rounds);
-
-static int md5_sparc64_init(struct shash_desc *desc)
-{
-	struct sparc_md5_state *mctx = shash_desc_ctx(desc);
-
-	mctx->hash[0] = cpu_to_le32(MD5_H0);
-	mctx->hash[1] = cpu_to_le32(MD5_H1);
-	mctx->hash[2] = cpu_to_le32(MD5_H2);
-	mctx->hash[3] = cpu_to_le32(MD5_H3);
-	mctx->byte_count = 0;
-
-	return 0;
-}
-
-static int md5_sparc64_update(struct shash_desc *desc, const u8 *data,
-			      unsigned int len)
-{
-	struct sparc_md5_state *sctx = shash_desc_ctx(desc);
-
-	sctx->byte_count += round_down(len, MD5_HMAC_BLOCK_SIZE);
-	md5_sparc64_transform(sctx->hash, data, len / MD5_HMAC_BLOCK_SIZE);
-	return len - round_down(len, MD5_HMAC_BLOCK_SIZE);
-}
-
-/* Add padding and return the message digest. */
-static int md5_sparc64_finup(struct shash_desc *desc, const u8 *src,
-			     unsigned int offset, u8 *out)
-{
-	struct sparc_md5_state *sctx = shash_desc_ctx(desc);
-	__le64 block[MD5_BLOCK_WORDS] = {};
-	u8 *p = memcpy(block, src, offset);
-	__le32 *dst = (__le32 *)out;
-	__le64 *pbits;
-	int i;
-
-	src = p;
-	p += offset;
-	*p++ = 0x80;
-	sctx->byte_count += offset;
-	pbits = &block[(MD5_BLOCK_WORDS / (offset > 55 ? 1 : 2)) - 1];
-	*pbits = cpu_to_le64(sctx->byte_count << 3);
-	md5_sparc64_transform(sctx->hash, src, (pbits - block + 1) / 8);
-	memzero_explicit(block, sizeof(block));
-
-	/* Store state in digest */
-	for (i = 0; i < MD5_HASH_WORDS; i++)
-		dst[i] = sctx->hash[i];
-
-	return 0;
-}
-
-static int md5_sparc64_export(struct shash_desc *desc, void *out)
-{
-	struct sparc_md5_state *sctx = shash_desc_ctx(desc);
-	union {
-		u8 *u8;
-		u32 *u32;
-		u64 *u64;
-	} p = { .u8 = out };
-	int i;
-
-	for (i = 0; i < MD5_HASH_WORDS; i++)
-		put_unaligned(le32_to_cpu(sctx->hash[i]), p.u32++);
-	put_unaligned(sctx->byte_count, p.u64);
-	return 0;
-}
-
-static int md5_sparc64_import(struct shash_desc *desc, const void *in)
-{
-	struct sparc_md5_state *sctx = shash_desc_ctx(desc);
-	union {
-		const u8 *u8;
-		const u32 *u32;
-		const u64 *u64;
-	} p = { .u8 = in };
-	int i;
-
-	for (i = 0; i < MD5_HASH_WORDS; i++)
-		sctx->hash[i] = cpu_to_le32(get_unaligned(p.u32++));
-	sctx->byte_count = get_unaligned(p.u64);
-	return 0;
-}
-
-static struct shash_alg alg = {
-	.digestsize	=	MD5_DIGEST_SIZE,
-	.init		=	md5_sparc64_init,
-	.update		=	md5_sparc64_update,
-	.finup		=	md5_sparc64_finup,
-	.export		=	md5_sparc64_export,
-	.import		=	md5_sparc64_import,
-	.descsize	=	sizeof(struct sparc_md5_state),
-	.statesize	=	sizeof(struct sparc_md5_state),
-	.base		=	{
-		.cra_name	=	"md5",
-		.cra_driver_name=	"md5-sparc64",
-		.cra_priority	=	SPARC_CR_OPCODE_PRIORITY,
-		.cra_flags	=	CRYPTO_AHASH_ALG_BLOCK_ONLY,
-		.cra_blocksize	=	MD5_HMAC_BLOCK_SIZE,
-		.cra_module	=	THIS_MODULE,
-	}
-};
-
-static bool __init sparc64_has_md5_opcode(void)
-{
-	unsigned long cfr;
-
-	if (!(sparc64_elf_hwcap & HWCAP_SPARC_CRYPTO))
-		return false;
-
-	__asm__ __volatile__("rd %%asr26, %0" : "=r" (cfr));
-	if (!(cfr & CFR_MD5))
-		return false;
-
-	return true;
-}
-
-static int __init md5_sparc64_mod_init(void)
-{
-	if (sparc64_has_md5_opcode()) {
-		pr_info("Using sparc64 md5 opcode optimized MD5 implementation\n");
-		return crypto_register_shash(&alg);
-	}
-	pr_info("sparc64 md5 opcode not available.\n");
-	return -ENODEV;
-}
-
-static void __exit md5_sparc64_mod_fini(void)
-{
-	crypto_unregister_shash(&alg);
-}
-
-module_init(md5_sparc64_mod_init);
-module_exit(md5_sparc64_mod_fini);
-
-MODULE_LICENSE("GPL");
-MODULE_DESCRIPTION("MD5 Message Digest Algorithm, sparc64 md5 opcode accelerated");
-
-MODULE_ALIAS_CRYPTO("md5");
-
-#include "crop_devid.c"
diff --git a/arch/sparc/include/asm/bitops_64.h b/arch/sparc/include/asm/bitops_64.h
index 005a8ae858f1..2c7d33b3ec2e 100644
--- a/arch/sparc/include/asm/bitops_64.h
+++ b/arch/sparc/include/asm/bitops_64.h
@@ -23,8 +23,8 @@ void set_bit(unsigned long nr, volatile unsigned long *addr);
 void clear_bit(unsigned long nr, volatile unsigned long *addr);
 void change_bit(unsigned long nr, volatile unsigned long *addr);
 
-int fls(unsigned int word);
-int __fls(unsigned long word);
+int __attribute_const__ fls(unsigned int word);
+int __attribute_const__ __fls(unsigned long word);
 
 #include <asm-generic/bitops/non-atomic.h>
 
@@ -32,8 +32,8 @@ int __fls(unsigned long word);
 
 #ifdef __KERNEL__
 
-int ffs(int x);
-unsigned long __ffs(unsigned long);
+int __attribute_const__ ffs(int x);
+unsigned long __attribute_const__ __ffs(unsigned long);
 
 #include <asm-generic/bitops/ffz.h>
 #include <asm-generic/bitops/sched.h>
diff --git a/arch/sparc/include/asm/floppy_32.h b/arch/sparc/include/asm/floppy_32.h
index 836f6575aa1d..7251d1fed7a4 100644
--- a/arch/sparc/include/asm/floppy_32.h
+++ b/arch/sparc/include/asm/floppy_32.h
@@ -96,9 +96,6 @@ static struct sun_floppy_ops sun_fdops;
 #define N_FDC    1
 #define N_DRIVE  8
 
-/* No 64k boundary crossing problems on the Sparc. */
-#define CROSS_64KB(a,s) (0)
-
 /* Routines unique to each controller type on a Sun. */
 static void sun_set_dor(unsigned char value, int fdc_82077)
 {
diff --git a/arch/sparc/include/asm/floppy_64.h b/arch/sparc/include/asm/floppy_64.h
index b0f633ce3518..135f9a49b6ba 100644
--- a/arch/sparc/include/asm/floppy_64.h
+++ b/arch/sparc/include/asm/floppy_64.h
@@ -95,9 +95,6 @@ static int sun_floppy_types[2] = { 0, 0 };
 #define N_FDC    1
 #define N_DRIVE  8
 
-/* No 64k boundary crossing problems on the Sparc. */
-#define CROSS_64KB(a,s) (0)
-
 static unsigned char sun_82077_fd_inb(unsigned long base, unsigned int reg)
 {
 	udelay(5);
diff --git a/arch/sparc/kernel/asm-offsets.c b/arch/sparc/kernel/asm-offsets.c
index 3d9b9855dce9..6e660bde48dd 100644
--- a/arch/sparc/kernel/asm-offsets.c
+++ b/arch/sparc/kernel/asm-offsets.c
@@ -10,6 +10,7 @@
  *
  * On sparc, thread_info data is static and TI_XXX offsets are computed by hand.
  */
+#define COMPILE_OFFSETS
 
 #include <linux/sched.h>
 #include <linux/mm_types.h>
diff --git a/arch/sparc/kernel/process_32.c b/arch/sparc/kernel/process_32.c
index 9c7c662cb565..5a28c0e91bf1 100644
--- a/arch/sparc/kernel/process_32.c
+++ b/arch/sparc/kernel/process_32.c
@@ -260,7 +260,7 @@ extern void ret_from_kernel_thread(void);
 
 int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
-	unsigned long clone_flags = args->flags;
+	u64 clone_flags = args->flags;
 	unsigned long sp = args->stack;
 	unsigned long tls = args->tls;
 	struct thread_info *ti = task_thread_info(p);
diff --git a/arch/sparc/kernel/process_64.c b/arch/sparc/kernel/process_64.c
index 529adfecd58c..25781923788a 100644
--- a/arch/sparc/kernel/process_64.c
+++ b/arch/sparc/kernel/process_64.c
@@ -567,7 +567,7 @@ barf:
  */
 int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
-	unsigned long clone_flags = args->flags;
+	u64 clone_flags = args->flags;
 	unsigned long sp = args->stack;
 	unsigned long tls = args->tls;
 	struct thread_info *t = task_thread_info(p);
diff --git a/arch/um/drivers/ubd_kern.c b/arch/um/drivers/ubd_kern.c
index 4de6613e7468..f2b2feeeb455 100644
--- a/arch/um/drivers/ubd_kern.c
+++ b/arch/um/drivers/ubd_kern.c
@@ -108,7 +108,7 @@ static DEFINE_MUTEX(ubd_lock);
 
 static int ubd_ioctl(struct block_device *bdev, blk_mode_t mode,
 		     unsigned int cmd, unsigned long arg);
-static int ubd_getgeo(struct block_device *bdev, struct hd_geometry *geo);
+static int ubd_getgeo(struct gendisk *disk, struct hd_geometry *geo);
 
 #define MAX_DEV (16)
 
@@ -1324,9 +1324,9 @@ static blk_status_t ubd_queue_rq(struct blk_mq_hw_ctx *hctx,
 	return res;
 }
 
-static int ubd_getgeo(struct block_device *bdev, struct hd_geometry *geo)
+static int ubd_getgeo(struct gendisk *disk, struct hd_geometry *geo)
 {
-	struct ubd *ubd_dev = bdev->bd_disk->private_data;
+	struct ubd *ubd_dev = disk->private_data;
 
 	geo->heads = 128;
 	geo->sectors = 32;
diff --git a/arch/um/drivers/virtio_uml.c b/arch/um/drivers/virtio_uml.c
index ad8d78fb1d9a..de7867ae220d 100644
--- a/arch/um/drivers/virtio_uml.c
+++ b/arch/um/drivers/virtio_uml.c
@@ -1250,10 +1250,12 @@ static int virtio_uml_probe(struct platform_device *pdev)
 	device_set_wakeup_capable(&vu_dev->vdev.dev, true);
 
 	rc = register_virtio_device(&vu_dev->vdev);
-	if (rc)
+	if (rc) {
 		put_device(&vu_dev->vdev.dev);
+		return rc;
+	}
 	vu_dev->registered = 1;
-	return rc;
+	return 0;
 
 error_init:
 	os_close_file(vu_dev->sock);
diff --git a/arch/um/kernel/asm-offsets.c b/arch/um/kernel/asm-offsets.c
index 1fb12235ab9c..a69873aa697f 100644
--- a/arch/um/kernel/asm-offsets.c
+++ b/arch/um/kernel/asm-offsets.c
@@ -1 +1,3 @@
+#define COMPILE_OFFSETS
+
 #include <sysdep/kernel-offsets.h>
diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c
index 1be644de9e41..9c9c66dc45f0 100644
--- a/arch/um/kernel/process.c
+++ b/arch/um/kernel/process.c
@@ -143,7 +143,7 @@ static void fork_handler(void)
 
 int copy_thread(struct task_struct * p, const struct kernel_clone_args *args)
 {
-	unsigned long clone_flags = args->flags;
+	u64 clone_flags = args->flags;
 	unsigned long sp = args->stack;
 	unsigned long tls = args->tls;
 	void (*handler)(void);
diff --git a/arch/um/os-Linux/file.c b/arch/um/os-Linux/file.c
index 617886d1fb1e..21f0e50fb1df 100644
--- a/arch/um/os-Linux/file.c
+++ b/arch/um/os-Linux/file.c
@@ -535,7 +535,7 @@ ssize_t os_rcv_fd_msg(int fd, int *fds, unsigned int n_fds,
 	    cmsg->cmsg_type != SCM_RIGHTS)
 		return n;
 
-	memcpy(fds, CMSG_DATA(cmsg), cmsg->cmsg_len);
+	memcpy(fds, CMSG_DATA(cmsg), cmsg->cmsg_len - CMSG_LEN(0));
 	return n;
 }
 
diff --git a/arch/um/os-Linux/util.c b/arch/um/os-Linux/util.c
index 4193e04d7e4a..e3ad71a0d13c 100644
--- a/arch/um/os-Linux/util.c
+++ b/arch/um/os-Linux/util.c
@@ -20,8 +20,7 @@
 
 void stack_protections(unsigned long address)
 {
-	if (mprotect((void *) address, UM_THREAD_SIZE,
-		    PROT_READ | PROT_WRITE | PROT_EXEC) < 0)
+	if (mprotect((void *) address, UM_THREAD_SIZE, PROT_READ | PROT_WRITE) < 0)
 		panic("protecting stack failed, errno = %d", errno);
 }
 
diff --git a/arch/x86/Kbuild b/arch/x86/Kbuild
index f7fb3d88c57b..36b985d0e7bf 100644
--- a/arch/x86/Kbuild
+++ b/arch/x86/Kbuild
@@ -3,6 +3,8 @@
 # Branch profiling isn't noinstr-safe.  Disable it for arch/x86/*
 subdir-ccflags-$(CONFIG_TRACE_BRANCH_PROFILING) += -DDISABLE_BRANCH_PROFILING
 
+obj-y += boot/startup/
+
 obj-$(CONFIG_ARCH_HAS_CC_PLATFORM) += coco/
 
 obj-y += entry/
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index 58d890fe2100..75f3de70df51 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -14,7 +14,6 @@ config X86_32
 	select ARCH_WANT_IPC_PARSE_VERSION
 	select CLKSRC_I8253
 	select CLONE_BACKWARDS
-	select GENERIC_VDSO_32
 	select HAVE_DEBUG_STACKOVERFLOW
 	select KMAP_LOCAL
 	select MODULES_USE_ELF_REL
@@ -26,7 +25,6 @@ config X86_64
 	depends on 64BIT
 	# Options that are inherently 64-bit kernel only:
 	select ARCH_HAS_GIGANTIC_PAGE
-	select ARCH_HAS_PTDUMP
 	select ARCH_SUPPORTS_MSEAL_SYSTEM_MAPPINGS
 	select ARCH_SUPPORTS_INT128 if CC_HAS_INT128
 	select ARCH_SUPPORTS_PER_VMA_LOCK
@@ -99,6 +97,7 @@ config X86
 	select ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE
 	select ARCH_HAS_PMEM_API		if X86_64
 	select ARCH_HAS_PREEMPT_LAZY
+	select ARCH_HAS_PTDUMP
 	select ARCH_HAS_PTE_SPECIAL
 	select ARCH_HAS_HW_PTE_YOUNG
 	select ARCH_HAS_NONLEAF_PMD_YOUNG	if PGTABLE_LEVELS > 2
@@ -127,8 +126,8 @@ config X86
 	select ARCH_SUPPORTS_PAGE_TABLE_CHECK	if X86_64
 	select ARCH_SUPPORTS_NUMA_BALANCING	if X86_64
 	select ARCH_SUPPORTS_KMAP_LOCAL_FORCE_MAP	if NR_CPUS <= 4096
-	select ARCH_SUPPORTS_CFI_CLANG		if X86_64
-	select ARCH_USES_CFI_TRAPS		if X86_64 && CFI_CLANG
+	select ARCH_SUPPORTS_CFI		if X86_64
+	select ARCH_USES_CFI_TRAPS		if X86_64 && CFI
 	select ARCH_SUPPORTS_LTO_CLANG
 	select ARCH_SUPPORTS_LTO_CLANG_THIN
 	select ARCH_SUPPORTS_RT
@@ -182,8 +181,6 @@ config X86
 	select GENERIC_SMP_IDLE_THREAD
 	select GENERIC_TIME_VSYSCALL
 	select GENERIC_GETTIMEOFDAY
-	select GENERIC_VDSO_DATA_STORE
-	select GENERIC_VDSO_TIME_NS
 	select GENERIC_VDSO_OVERFLOW_PROTECT
 	select GUP_GET_PXX_LOW_HIGH		if X86_PAE
 	select HARDIRQS_SW_RESEND
@@ -239,6 +236,7 @@ config X86
 	select HAVE_EFFICIENT_UNALIGNED_ACCESS
 	select HAVE_EISA			if X86_32
 	select HAVE_EXIT_THREAD
+	select HAVE_GENERIC_TIF_BITS
 	select HAVE_GUP_FAST
 	select HAVE_FENTRY			if X86_64 || DYNAMIC_FTRACE
 	select HAVE_FTRACE_GRAPH_FUNC		if HAVE_FUNCTION_GRAPH_TRACER
@@ -330,6 +328,10 @@ config X86
 	imply IMA_SECURE_AND_OR_TRUSTED_BOOT    if EFI
 	select HAVE_DYNAMIC_FTRACE_NO_PATCHABLE
 	select ARCH_SUPPORTS_PT_RECLAIM		if X86_64
+	select ARCH_SUPPORTS_SCHED_SMT		if SMP
+	select SCHED_SMT			if SMP
+	select ARCH_SUPPORTS_SCHED_CLUSTER	if SMP
+	select ARCH_SUPPORTS_SCHED_MC		if SMP
 
 config INSTRUCTION_DECODER
 	def_bool y
@@ -483,6 +485,19 @@ config X86_X2APIC
 
 	  If in doubt, say Y.
 
+config AMD_SECURE_AVIC
+	bool "AMD Secure AVIC"
+	depends on AMD_MEM_ENCRYPT && X86_X2APIC
+	help
+	  Enable this to get AMD Secure AVIC support on guests that have this feature.
+
+	  AMD Secure AVIC provides hardware acceleration for performance sensitive
+	  APIC accesses and support for managing guest owned APIC state for SEV-SNP
+	  guests. Secure AVIC does not support xAPIC mode. It has functional
+	  dependency on x2apic being enabled in the guest.
+
+	  If you don't know what to do here, say N.
+
 config X86_POSTED_MSI
 	bool "Enable MSI and MSI-x delivery by posted interrupts"
 	depends on X86_64 && IRQ_REMAP
@@ -879,6 +894,15 @@ config ACRN_GUEST
 	  IOT with small footprint and real-time features. More details can be
 	  found in https://projectacrn.org/.
 
+config BHYVE_GUEST
+	bool "Bhyve (BSD Hypervisor) Guest support"
+	depends on X86_64
+	help
+	  This option allows to run Linux to recognise when it is running as a
+	  guest in the Bhyve hypervisor, and to support more than 255 vCPUs when
+	  when doing so. More details about Bhyve can be found at https://bhyve.org
+	  and https://wiki.freebsd.org/bhyve/.
+
 config INTEL_TDX_GUEST
 	bool "Intel TDX (Trust Domain Extensions) - Guest Support"
 	depends on X86_64 && CPU_SUP_INTEL
@@ -1031,29 +1055,6 @@ config NR_CPUS
 	  This is purely to save memory: each supported CPU adds about 8KB
 	  to the kernel image.
 
-config SCHED_CLUSTER
-	bool "Cluster scheduler support"
-	depends on SMP
-	default y
-	help
-	  Cluster scheduler support improves the CPU scheduler's decision
-	  making when dealing with machines that have clusters of CPUs.
-	  Cluster usually means a couple of CPUs which are placed closely
-	  by sharing mid-level caches, last-level cache tags or internal
-	  busses.
-
-config SCHED_SMT
-	def_bool y if SMP
-
-config SCHED_MC
-	def_bool y
-	prompt "Multi-core scheduler support"
-	depends on SMP
-	help
-	  Multi-core scheduler support improves the CPU scheduler's decision
-	  making when dealing with multi-core CPU chips at a cost of slightly
-	  increased overhead in some places. If unsure say N here.
-
 config SCHED_MC_PRIO
 	bool "CPU core priorities scheduler support"
 	depends on SCHED_MC
@@ -1340,7 +1341,7 @@ config MICROCODE_LATE_LOADING
 	  use this at your own risk. Late loading taints the kernel unless the
 	  microcode header indicates that it is safe for late loading via the
 	  minimal revision check. This minimal revision check can be enforced on
-	  the kernel command line with "microcode.minrev=Y".
+	  the kernel command line with "microcode=force_minrev".
 
 config MICROCODE_LATE_FORCE_MINREV
 	bool "Enforce late microcode loading minimal revision check"
@@ -1356,10 +1357,22 @@ config MICROCODE_LATE_FORCE_MINREV
 	  revision check fails.
 
 	  This minimal revision check can also be controlled via the
-	  "microcode.minrev" parameter on the kernel command line.
+	  "microcode=force_minrev" parameter on the kernel command line.
 
 	  If unsure say Y.
 
+config MICROCODE_DBG
+	bool "Enable microcode loader debugging"
+	default n
+	depends on MICROCODE
+	help
+	  Enable code which allows for debugging the microcode loader in
+	  a guest. Meaning the patch loading is simulated but everything else
+	  related to patch parsing and handling is done as on baremetal with
+	  the purpose of debugging solely the software side of things.
+
+	  You almost certainly want to say n here.
+
 config X86_MSR
 	tristate "/dev/cpu/*/msr - Model-specific register support"
 	help
@@ -1753,11 +1766,7 @@ config X86_UMIP
 config CC_HAS_IBT
 	# GCC >= 9 and binutils >= 2.29
 	# Retpoline check to work around https://gcc.gnu.org/bugzilla/show_bug.cgi?id=93654
-	# Clang/LLVM >= 14
-	# https://github.com/llvm/llvm-project/commit/e0b89df2e0f0130881bf6c39bf31d7f6aac00e0f
-	# https://github.com/llvm/llvm-project/commit/dfcf69770bc522b9e411c66454934a37c1f35332
-	def_bool ((CC_IS_GCC && $(cc-option, -fcf-protection=branch -mindirect-branch-register)) || \
-		  (CC_IS_CLANG && CLANG_VERSION >= 140000)) && \
+	def_bool ((CC_IS_GCC && $(cc-option, -fcf-protection=branch -mindirect-branch-register)) || CC_IS_CLANG) && \
 		  $(as-instr,endbr64)
 
 config X86_CET
@@ -1769,8 +1778,6 @@ config X86_KERNEL_IBT
 	prompt "Indirect Branch Tracking"
 	def_bool y
 	depends on X86_64 && CC_HAS_IBT && HAVE_OBJTOOL
-	# https://github.com/llvm/llvm-project/commit/9d7001eba9c4cb311e03cd8cdc231f9e579f2d0f
-	depends on !LD_IS_LLD || LLD_VERSION >= 140000
 	select OBJTOOL
 	select X86_CET
 	help
@@ -2396,11 +2403,11 @@ config FUNCTION_PADDING_CFI
 	default  3 if FUNCTION_ALIGNMENT_8B
 	default  0
 
-# Basically: FUNCTION_ALIGNMENT - 5*CFI_CLANG
+# Basically: FUNCTION_ALIGNMENT - 5*CFI
 # except Kconfig can't do arithmetic :/
 config FUNCTION_PADDING_BYTES
 	int
-	default FUNCTION_PADDING_CFI if CFI_CLANG
+	default FUNCTION_PADDING_CFI if CFI
 	default FUNCTION_ALIGNMENT
 
 config CALL_PADDING
@@ -2410,7 +2417,7 @@ config CALL_PADDING
 
 config FINEIBT
 	def_bool y
-	depends on X86_KERNEL_IBT && CFI_CLANG && MITIGATION_RETPOLINE
+	depends on X86_KERNEL_IBT && CFI && MITIGATION_RETPOLINE
 	select CALL_PADDING
 
 config FINEIBT_BHI
@@ -2427,7 +2434,7 @@ config CALL_THUNKS
 
 config PREFIX_SYMBOLS
 	def_bool y
-	depends on CALL_PADDING && !CFI_CLANG
+	depends on CALL_PADDING && !CFI
 
 menuconfig CPU_MITIGATIONS
 	bool "Mitigations for CPU vulnerabilities"
@@ -2701,6 +2708,15 @@ config MITIGATION_TSA
 	  security vulnerability on AMD CPUs which can lead to forwarding of
 	  invalid info to subsequent instructions and thus can affect their
 	  timing and thereby cause a leakage.
+
+config MITIGATION_VMSCAPE
+	bool "Mitigate VMSCAPE"
+	depends on KVM
+	default y
+	help
+	  Enable mitigation for VMSCAPE attacks. VMSCAPE is a hardware security
+	  vulnerability on Intel and AMD CPUs that may allow a guest to do
+	  Spectre v2 style attacks on userspace hypervisor.
 endif
 
 config ARCH_HAS_ADD_PAGES
diff --git a/arch/x86/Makefile b/arch/x86/Makefile
index 1913d342969b..4db7e4bf69f5 100644
--- a/arch/x86/Makefile
+++ b/arch/x86/Makefile
@@ -13,8 +13,8 @@ else
 endif
 
 ifdef CONFIG_CC_IS_GCC
-RETPOLINE_CFLAGS	:= $(call cc-option,-mindirect-branch=thunk-extern -mindirect-branch-register)
-RETPOLINE_VDSO_CFLAGS	:= $(call cc-option,-mindirect-branch=thunk-inline -mindirect-branch-register)
+RETPOLINE_CFLAGS	:= -mindirect-branch=thunk-extern -mindirect-branch-register
+RETPOLINE_VDSO_CFLAGS	:= -mindirect-branch=thunk-inline -mindirect-branch-register
 endif
 ifdef CONFIG_CC_IS_CLANG
 RETPOLINE_CFLAGS	:= -mretpoline-external-thunk
@@ -37,10 +37,11 @@ export RETPOLINE_VDSO_CFLAGS
 
 # For gcc stack alignment is specified with -mpreferred-stack-boundary,
 # clang has the option -mstack-alignment for that purpose.
-ifneq ($(call cc-option, -mpreferred-stack-boundary=4),)
+ifdef CONFIG_CC_IS_GCC
       cc_stack_align4 := -mpreferred-stack-boundary=2
       cc_stack_align8 := -mpreferred-stack-boundary=3
-else ifneq ($(call cc-option, -mstack-alignment=16),)
+endif
+ifdef CONFIG_CC_IS_CLANG
       cc_stack_align4 := -mstack-alignment=4
       cc_stack_align8 := -mstack-alignment=8
 endif
@@ -83,19 +84,7 @@ KBUILD_RUSTFLAGS += -Ctarget-feature=-sse,-sse2,-sse3,-ssse3,-sse4.1,-sse4.2,-av
 #
 CC_FLAGS_FPU := -msse -msse2
 ifdef CONFIG_CC_IS_GCC
-# Stack alignment mismatch, proceed with caution.
-# GCC < 7.1 cannot compile code using `double` and -mpreferred-stack-boundary=3
-# (8B stack alignment).
-# See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=53383
-#
-# The "-msse" in the first argument is there so that the
-# -mpreferred-stack-boundary=3 build error:
-#
-#  -mpreferred-stack-boundary=3 is not between 4 and 12
-#
-# can be triggered. Otherwise gcc doesn't complain.
 CC_FLAGS_FPU += -mhard-float
-CC_FLAGS_FPU += $(call cc-option,-msse -mpreferred-stack-boundary=3,-mpreferred-stack-boundary=4)
 endif
 
 ifeq ($(CONFIG_X86_KERNEL_IBT),y)
@@ -159,7 +148,7 @@ else
 
         # Don't autogenerate traditional x87 instructions
         KBUILD_CFLAGS += -mno-80387
-        KBUILD_CFLAGS += $(call cc-option,-mno-fp-ret-in-387)
+        KBUILD_CFLAGS += -mno-fp-ret-in-387
 
         # By default gcc and clang use a stack alignment of 16 bytes for x86.
         # However the standard kernel entry on x86-64 leaves the stack on an
@@ -171,7 +160,7 @@ else
         KBUILD_CFLAGS += $(cc_stack_align8)
 
 	# Use -mskip-rax-setup if supported.
-	KBUILD_CFLAGS += $(call cc-option,-mskip-rax-setup)
+	KBUILD_CFLAGS += -mskip-rax-setup
 
 ifdef CONFIG_X86_NATIVE_CPU
         KBUILD_CFLAGS += -march=native
@@ -286,7 +275,6 @@ archprepare: $(cpufeaturemasks.hdr)
 ###
 # Kernel objects
 
-core-y  += arch/x86/boot/startup/
 libs-y  += arch/x86/lib/
 
 # drivers-y are linked after core-y
diff --git a/arch/x86/boot/compressed/Makefile b/arch/x86/boot/compressed/Makefile
index 3a38fdcdb9bd..74657589264d 100644
--- a/arch/x86/boot/compressed/Makefile
+++ b/arch/x86/boot/compressed/Makefile
@@ -73,7 +73,7 @@ LDFLAGS_vmlinux += -T
 hostprogs	:= mkpiggy
 HOST_EXTRACFLAGS += -I$(srctree)/tools/include
 
-sed-voffset := -e 's/^\([0-9a-fA-F]*\) [ABbCDGRSTtVW] \(_text\|__start_rodata\|__bss_start\|_end\)$$/\#define VO_\2 _AC(0x\1,UL)/p'
+sed-voffset := -e 's/^\([0-9a-fA-F]*\) [ABbCDGRSTtVW] \(_text\|__start_rodata\|_sinittext\|__inittext_end\|__bss_start\|_end\)$$/\#define VO_\2 _AC(0x\1,UL)/p'
 
 quiet_cmd_voffset = VOFFSET $@
       cmd_voffset = $(NM) $< | sed -n $(sed-voffset) > $@
diff --git a/arch/x86/boot/compressed/misc.c b/arch/x86/boot/compressed/misc.c
index 94b5991da001..0f41ca0e52c0 100644
--- a/arch/x86/boot/compressed/misc.c
+++ b/arch/x86/boot/compressed/misc.c
@@ -332,6 +332,8 @@ static size_t parse_elf(void *output)
 }
 
 const unsigned long kernel_text_size = VO___start_rodata - VO__text;
+const unsigned long kernel_inittext_offset = VO__sinittext - VO__text;
+const unsigned long kernel_inittext_size = VO___inittext_end - VO__sinittext;
 const unsigned long kernel_total_size = VO__end - VO__text;
 
 static u8 boot_heap[BOOT_HEAP_SIZE] __aligned(4);
diff --git a/arch/x86/boot/compressed/sev-handle-vc.c b/arch/x86/boot/compressed/sev-handle-vc.c
index 89dd02de2a0f..7530ad8b768b 100644
--- a/arch/x86/boot/compressed/sev-handle-vc.c
+++ b/arch/x86/boot/compressed/sev-handle-vc.c
@@ -1,6 +1,7 @@
 // SPDX-License-Identifier: GPL-2.0
 
 #include "misc.h"
+#include "error.h"
 #include "sev.h"
 
 #include <linux/kernel.h>
@@ -14,6 +15,8 @@
 #include <asm/fpu/xcr.h>
 
 #define __BOOT_COMPRESSED
+#undef __init
+#define __init
 
 /* Basic instruction decoding support needed */
 #include "../../lib/inat.c"
diff --git a/arch/x86/boot/compressed/sev.c b/arch/x86/boot/compressed/sev.c
index fd1b67dfea22..6e5c32a53d03 100644
--- a/arch/x86/boot/compressed/sev.c
+++ b/arch/x86/boot/compressed/sev.c
@@ -32,102 +32,47 @@ struct ghcb *boot_ghcb;
 #undef __init
 #define __init
 
-#undef __head
-#define __head
-
 #define __BOOT_COMPRESSED
 
-extern struct svsm_ca *boot_svsm_caa;
-extern u64 boot_svsm_caa_pa;
-
-struct svsm_ca *svsm_get_caa(void)
-{
-	return boot_svsm_caa;
-}
-
-u64 svsm_get_caa_pa(void)
-{
-	return boot_svsm_caa_pa;
-}
-
-int svsm_perform_call_protocol(struct svsm_call *call);
-
 u8 snp_vmpl;
+u16 ghcb_version;
+
+u64 boot_svsm_caa_pa;
 
 /* Include code for early handlers */
 #include "../../boot/startup/sev-shared.c"
 
-int svsm_perform_call_protocol(struct svsm_call *call)
-{
-	struct ghcb *ghcb;
-	int ret;
-
-	if (boot_ghcb)
-		ghcb = boot_ghcb;
-	else
-		ghcb = NULL;
-
-	do {
-		ret = ghcb ? svsm_perform_ghcb_protocol(ghcb, call)
-			   : svsm_perform_msr_protocol(call);
-	} while (ret == -EAGAIN);
-
-	return ret;
-}
-
 static bool sev_snp_enabled(void)
 {
 	return sev_status & MSR_AMD64_SEV_SNP_ENABLED;
 }
 
-static void __page_state_change(unsigned long paddr, enum psc_op op)
-{
-	u64 val, msr;
-
-	/*
-	 * If private -> shared then invalidate the page before requesting the
-	 * state change in the RMP table.
-	 */
-	if (op == SNP_PAGE_STATE_SHARED)
-		pvalidate_4k_page(paddr, paddr, false);
-
-	/* Save the current GHCB MSR value */
-	msr = sev_es_rd_ghcb_msr();
-
-	/* Issue VMGEXIT to change the page state in RMP table. */
-	sev_es_wr_ghcb_msr(GHCB_MSR_PSC_REQ_GFN(paddr >> PAGE_SHIFT, op));
-	VMGEXIT();
-
-	/* Read the response of the VMGEXIT. */
-	val = sev_es_rd_ghcb_msr();
-	if ((GHCB_RESP_CODE(val) != GHCB_MSR_PSC_RESP) || GHCB_MSR_PSC_RESP_VAL(val))
-		sev_es_terminate(SEV_TERM_SET_LINUX, GHCB_TERM_PSC);
-
-	/* Restore the GHCB MSR value */
-	sev_es_wr_ghcb_msr(msr);
-
-	/*
-	 * Now that page state is changed in the RMP table, validate it so that it is
-	 * consistent with the RMP entry.
-	 */
-	if (op == SNP_PAGE_STATE_PRIVATE)
-		pvalidate_4k_page(paddr, paddr, true);
-}
-
 void snp_set_page_private(unsigned long paddr)
 {
+	struct psc_desc d = {
+		SNP_PAGE_STATE_PRIVATE,
+		(struct svsm_ca *)boot_svsm_caa_pa,
+		boot_svsm_caa_pa
+	};
+
 	if (!sev_snp_enabled())
 		return;
 
-	__page_state_change(paddr, SNP_PAGE_STATE_PRIVATE);
+	__page_state_change(paddr, paddr, &d);
 }
 
 void snp_set_page_shared(unsigned long paddr)
 {
+	struct psc_desc d = {
+		SNP_PAGE_STATE_SHARED,
+		(struct svsm_ca *)boot_svsm_caa_pa,
+		boot_svsm_caa_pa
+	};
+
 	if (!sev_snp_enabled())
 		return;
 
-	__page_state_change(paddr, SNP_PAGE_STATE_SHARED);
+	__page_state_change(paddr, paddr, &d);
 }
 
 bool early_setup_ghcb(void)
@@ -152,8 +97,14 @@ bool early_setup_ghcb(void)
 
 void snp_accept_memory(phys_addr_t start, phys_addr_t end)
 {
+	struct psc_desc d = {
+		SNP_PAGE_STATE_PRIVATE,
+		(struct svsm_ca *)boot_svsm_caa_pa,
+		boot_svsm_caa_pa
+	};
+
 	for (phys_addr_t pa = start; pa < end; pa += PAGE_SIZE)
-		__page_state_change(pa, SNP_PAGE_STATE_PRIVATE);
+		__page_state_change(pa, pa, &d);
 }
 
 void sev_es_shutdown_ghcb(void)
@@ -235,15 +186,23 @@ bool sev_es_check_ghcb_fault(unsigned long address)
 				 MSR_AMD64_SNP_VMSA_REG_PROT |		\
 				 MSR_AMD64_SNP_RESERVED_BIT13 |		\
 				 MSR_AMD64_SNP_RESERVED_BIT15 |		\
+				 MSR_AMD64_SNP_SECURE_AVIC |		\
 				 MSR_AMD64_SNP_RESERVED_MASK)
 
+#ifdef CONFIG_AMD_SECURE_AVIC
+#define SNP_FEATURE_SECURE_AVIC		MSR_AMD64_SNP_SECURE_AVIC
+#else
+#define SNP_FEATURE_SECURE_AVIC		0
+#endif
+
 /*
  * SNP_FEATURES_PRESENT is the mask of SNP features that are implemented
  * by the guest kernel. As and when a new feature is implemented in the
  * guest kernel, a corresponding bit should be added to the mask.
  */
 #define SNP_FEATURES_PRESENT	(MSR_AMD64_SNP_DEBUG_SWAP |	\
-				 MSR_AMD64_SNP_SECURE_TSC)
+				 MSR_AMD64_SNP_SECURE_TSC |	\
+				 SNP_FEATURE_SECURE_AVIC)
 
 u64 snp_get_unsupported_features(u64 status)
 {
@@ -347,7 +306,7 @@ static bool early_snp_init(struct boot_params *bp)
 	 * running at VMPL0. The CA will be used to communicate with the
 	 * SVSM and request its services.
 	 */
-	svsm_setup_ca(cc_info);
+	svsm_setup_ca(cc_info, rip_rel_ptr(&boot_ghcb_page));
 
 	/*
 	 * Pass run-time kernel a pointer to CC info via boot_params so EFI
@@ -391,6 +350,8 @@ static int sev_check_cpu_support(void)
 	if (!(eax & BIT(1)))
 		return -ENODEV;
 
+	sev_snp_needs_sfw = !(ebx & BIT(31));
+
 	return ebx & 0x3f;
 }
 
@@ -453,30 +414,16 @@ void sev_enable(struct boot_params *bp)
 	 */
 	if (sev_status & MSR_AMD64_SEV_SNP_ENABLED) {
 		u64 hv_features;
-		int ret;
 
 		hv_features = get_hv_features();
 		if (!(hv_features & GHCB_HV_FT_SNP))
 			sev_es_terminate(SEV_TERM_SET_GEN, GHCB_SNP_UNSUPPORTED);
 
 		/*
-		 * Enforce running at VMPL0 or with an SVSM.
-		 *
-		 * Use RMPADJUST (see the rmpadjust() function for a description of
-		 * what the instruction does) to update the VMPL1 permissions of a
-		 * page. If the guest is running at VMPL0, this will succeed. If the
-		 * guest is running at any other VMPL, this will fail. Linux SNP guests
-		 * only ever run at a single VMPL level so permission mask changes of a
-		 * lesser-privileged VMPL are a don't-care.
-		 */
-		ret = rmpadjust((unsigned long)&boot_ghcb_page, RMP_PG_SIZE_4K, 1);
-
-		/*
-		 * Running at VMPL0 is not required if an SVSM is present and the hypervisor
-		 * supports the required SVSM GHCB events.
+		 * Running at VMPL0 is required unless an SVSM is present and
+		 * the hypervisor supports the required SVSM GHCB events.
 		 */
-		if (ret &&
-		    !(snp_vmpl && (hv_features & GHCB_HV_FT_SNP_MULTI_VMPL)))
+		if (snp_vmpl && !(hv_features & GHCB_HV_FT_SNP_MULTI_VMPL))
 			sev_es_terminate(SEV_TERM_SET_LINUX, GHCB_TERM_NOT_VMPL0);
 	}
 
@@ -550,7 +497,6 @@ bool early_is_sevsnp_guest(void)
 
 			/* Obtain the address of the calling area to use */
 			boot_rdmsr(MSR_SVSM_CAA, &m);
-			boot_svsm_caa = (void *)m.q;
 			boot_svsm_caa_pa = m.q;
 
 			/*
diff --git a/arch/x86/boot/startup/Makefile b/arch/x86/boot/startup/Makefile
index b514f7e81332..e8fdf020b422 100644
--- a/arch/x86/boot/startup/Makefile
+++ b/arch/x86/boot/startup/Makefile
@@ -4,6 +4,7 @@ KBUILD_AFLAGS		+= -D__DISABLE_EXPORTS
 KBUILD_CFLAGS		+= -D__DISABLE_EXPORTS -mcmodel=small -fPIC \
 			   -Os -DDISABLE_BRANCH_PROFILING \
 			   $(DISABLE_STACKLEAK_PLUGIN) \
+			   $(DISABLE_LATENT_ENTROPY_PLUGIN) \
 			   -fno-stack-protector -D__NO_FORTIFY \
 			   -fno-jump-tables \
 			   -include $(srctree)/include/linux/hidden.h
@@ -19,6 +20,7 @@ KCOV_INSTRUMENT	:= n
 
 obj-$(CONFIG_X86_64)		+= gdt_idt.o map_kernel.o
 obj-$(CONFIG_AMD_MEM_ENCRYPT)	+= sme.o sev-startup.o
+pi-objs				:= $(patsubst %.o,$(obj)/%.o,$(obj-y))
 
 lib-$(CONFIG_X86_64)		+= la57toggle.o
 lib-$(CONFIG_EFI_MIXED)		+= efi-mixed.o
@@ -28,3 +30,23 @@ lib-$(CONFIG_EFI_MIXED)		+= efi-mixed.o
 # to be linked into the decompressor or the EFI stub but not vmlinux
 #
 $(patsubst %.o,$(obj)/%.o,$(lib-y)): OBJECT_FILES_NON_STANDARD := y
+
+#
+# Invoke objtool for each object individually to check for absolute
+# relocations, even if other objtool actions are being deferred.
+#
+$(pi-objs): objtool-enabled	= 1
+$(pi-objs): objtool-args	= $(if $(delay-objtool),,$(objtool-args-y)) --noabs
+
+#
+# Confine the startup code by prefixing all symbols with __pi_ (for position
+# independent). This ensures that startup code can only call other startup
+# code, or code that has explicitly been made accessible to it via a symbol
+# alias.
+#
+$(obj)/%.pi.o: OBJCOPYFLAGS := --prefix-symbols=__pi_
+$(obj)/%.pi.o: $(obj)/%.o FORCE
+	$(call if_changed,objcopy)
+
+targets	+= $(obj-y)
+obj-y	:= $(patsubst %.o,%.pi.o,$(obj-y))
diff --git a/arch/x86/boot/startup/exports.h b/arch/x86/boot/startup/exports.h
new file mode 100644
index 000000000000..01d2363dc445
--- /dev/null
+++ b/arch/x86/boot/startup/exports.h
@@ -0,0 +1,14 @@
+
+/*
+ * The symbols below are functions that are implemented by the startup code,
+ * but called at runtime by the SEV code residing in the core kernel.
+ */
+PROVIDE(early_set_pages_state		= __pi_early_set_pages_state);
+PROVIDE(early_snp_set_memory_private	= __pi_early_snp_set_memory_private);
+PROVIDE(early_snp_set_memory_shared	= __pi_early_snp_set_memory_shared);
+PROVIDE(get_hv_features			= __pi_get_hv_features);
+PROVIDE(sev_es_terminate		= __pi_sev_es_terminate);
+PROVIDE(snp_cpuid			= __pi_snp_cpuid);
+PROVIDE(snp_cpuid_get_table		= __pi_snp_cpuid_get_table);
+PROVIDE(svsm_issue_call			= __pi_svsm_issue_call);
+PROVIDE(svsm_process_result_codes	= __pi_svsm_process_result_codes);
diff --git a/arch/x86/boot/startup/gdt_idt.c b/arch/x86/boot/startup/gdt_idt.c
index a3112a69b06a..d16102abdaec 100644
--- a/arch/x86/boot/startup/gdt_idt.c
+++ b/arch/x86/boot/startup/gdt_idt.c
@@ -24,7 +24,7 @@
 static gate_desc bringup_idt_table[NUM_EXCEPTION_VECTORS] __page_aligned_data;
 
 /* This may run while still in the direct mapping */
-void __head startup_64_load_idt(void *vc_handler)
+void startup_64_load_idt(void *vc_handler)
 {
 	struct desc_ptr desc = {
 		.address = (unsigned long)rip_rel_ptr(bringup_idt_table),
@@ -46,7 +46,7 @@ void __head startup_64_load_idt(void *vc_handler)
 /*
  * Setup boot CPU state needed before kernel switches to virtual addresses.
  */
-void __head startup_64_setup_gdt_idt(void)
+void __init startup_64_setup_gdt_idt(void)
 {
 	struct gdt_page *gp = rip_rel_ptr((void *)(__force unsigned long)&gdt_page);
 	void *handler = NULL;
diff --git a/arch/x86/boot/startup/map_kernel.c b/arch/x86/boot/startup/map_kernel.c
index 332dbe6688c4..83ba98d61572 100644
--- a/arch/x86/boot/startup/map_kernel.c
+++ b/arch/x86/boot/startup/map_kernel.c
@@ -30,7 +30,7 @@ static inline bool check_la57_support(void)
 	return true;
 }
 
-static unsigned long __head sme_postprocess_startup(struct boot_params *bp,
+static unsigned long __init sme_postprocess_startup(struct boot_params *bp,
 						    pmdval_t *pmd,
 						    unsigned long p2v_offset)
 {
@@ -84,7 +84,7 @@ static unsigned long __head sme_postprocess_startup(struct boot_params *bp,
  * the 1:1 mapping of memory. Kernel virtual addresses can be determined by
  * subtracting p2v_offset from the RIP-relative address.
  */
-unsigned long __head __startup_64(unsigned long p2v_offset,
+unsigned long __init __startup_64(unsigned long p2v_offset,
 				  struct boot_params *bp)
 {
 	pmd_t (*early_pgts)[PTRS_PER_PMD] = rip_rel_ptr(early_dynamic_pgts);
diff --git a/arch/x86/boot/startup/sev-shared.c b/arch/x86/boot/startup/sev-shared.c
index 7a706db87b93..4e22ffd73516 100644
--- a/arch/x86/boot/startup/sev-shared.c
+++ b/arch/x86/boot/startup/sev-shared.c
@@ -12,35 +12,12 @@
 #include <asm/setup_data.h>
 
 #ifndef __BOOT_COMPRESSED
-#define error(v)			pr_err(v)
 #define has_cpuflag(f)			boot_cpu_has(f)
 #else
 #undef WARN
 #define WARN(condition, format...) (!!(condition))
-#undef vc_forward_exception
-#define vc_forward_exception(c)		panic("SNP: Hypervisor requested exception\n")
 #endif
 
-/*
- * SVSM related information:
- *   During boot, the page tables are set up as identity mapped and later
- *   changed to use kernel virtual addresses. Maintain separate virtual and
- *   physical addresses for the CAA to allow SVSM functions to be used during
- *   early boot, both with identity mapped virtual addresses and proper kernel
- *   virtual addresses.
- */
-struct svsm_ca *boot_svsm_caa __ro_after_init;
-u64 boot_svsm_caa_pa __ro_after_init;
-
-/*
- * Since feature negotiation related variables are set early in the boot
- * process they must reside in the .data section so as not to be zeroed
- * out when the .bss section is later cleared.
- *
- * GHCB protocol version negotiated with the hypervisor.
- */
-static u16 ghcb_version __ro_after_init;
-
 /* Copy of the SNP firmware's CPUID page. */
 static struct snp_cpuid_table cpuid_table_copy __ro_after_init;
 
@@ -54,17 +31,9 @@ static u32 cpuid_std_range_max __ro_after_init;
 static u32 cpuid_hyp_range_max __ro_after_init;
 static u32 cpuid_ext_range_max __ro_after_init;
 
-bool __init sev_es_check_cpu_features(void)
-{
-	if (!has_cpuflag(X86_FEATURE_RDRAND)) {
-		error("RDRAND instruction not supported - no trusted source of randomness available\n");
-		return false;
-	}
-
-	return true;
-}
+bool sev_snp_needs_sfw;
 
-void __head __noreturn
+void __noreturn
 sev_es_terminate(unsigned int set, unsigned int reason)
 {
 	u64 val = GHCB_MSR_TERM_REQ;
@@ -83,7 +52,7 @@ sev_es_terminate(unsigned int set, unsigned int reason)
 /*
  * The hypervisor features are available from GHCB version 2 onward.
  */
-u64 get_hv_features(void)
+u64 __init get_hv_features(void)
 {
 	u64 val;
 
@@ -100,72 +69,7 @@ u64 get_hv_features(void)
 	return GHCB_MSR_HV_FT_RESP_VAL(val);
 }
 
-void snp_register_ghcb_early(unsigned long paddr)
-{
-	unsigned long pfn = paddr >> PAGE_SHIFT;
-	u64 val;
-
-	sev_es_wr_ghcb_msr(GHCB_MSR_REG_GPA_REQ_VAL(pfn));
-	VMGEXIT();
-
-	val = sev_es_rd_ghcb_msr();
-
-	/* If the response GPA is not ours then abort the guest */
-	if ((GHCB_RESP_CODE(val) != GHCB_MSR_REG_GPA_RESP) ||
-	    (GHCB_MSR_REG_GPA_RESP_VAL(val) != pfn))
-		sev_es_terminate(SEV_TERM_SET_LINUX, GHCB_TERM_REGISTER);
-}
-
-bool sev_es_negotiate_protocol(void)
-{
-	u64 val;
-
-	/* Do the GHCB protocol version negotiation */
-	sev_es_wr_ghcb_msr(GHCB_MSR_SEV_INFO_REQ);
-	VMGEXIT();
-	val = sev_es_rd_ghcb_msr();
-
-	if (GHCB_MSR_INFO(val) != GHCB_MSR_SEV_INFO_RESP)
-		return false;
-
-	if (GHCB_MSR_PROTO_MAX(val) < GHCB_PROTOCOL_MIN ||
-	    GHCB_MSR_PROTO_MIN(val) > GHCB_PROTOCOL_MAX)
-		return false;
-
-	ghcb_version = min_t(size_t, GHCB_MSR_PROTO_MAX(val), GHCB_PROTOCOL_MAX);
-
-	return true;
-}
-
-static enum es_result verify_exception_info(struct ghcb *ghcb, struct es_em_ctxt *ctxt)
-{
-	u32 ret;
-
-	ret = ghcb->save.sw_exit_info_1 & GENMASK_ULL(31, 0);
-	if (!ret)
-		return ES_OK;
-
-	if (ret == 1) {
-		u64 info = ghcb->save.sw_exit_info_2;
-		unsigned long v = info & SVM_EVTINJ_VEC_MASK;
-
-		/* Check if exception information from hypervisor is sane. */
-		if ((info & SVM_EVTINJ_VALID) &&
-		    ((v == X86_TRAP_GP) || (v == X86_TRAP_UD)) &&
-		    ((info & SVM_EVTINJ_TYPE_MASK) == SVM_EVTINJ_TYPE_EXEPT)) {
-			ctxt->fi.vector = v;
-
-			if (info & SVM_EVTINJ_VALID_ERR)
-				ctxt->fi.error_code = info >> 32;
-
-			return ES_EXCEPTION;
-		}
-	}
-
-	return ES_VMM_ERROR;
-}
-
-static inline int svsm_process_result_codes(struct svsm_call *call)
+int svsm_process_result_codes(struct svsm_call *call)
 {
 	switch (call->rax_out) {
 	case SVSM_SUCCESS:
@@ -193,7 +97,7 @@ static inline int svsm_process_result_codes(struct svsm_call *call)
  *     - RAX specifies the SVSM protocol/callid as input and the return code
  *       as output.
  */
-static __always_inline void svsm_issue_call(struct svsm_call *call, u8 *pending)
+void svsm_issue_call(struct svsm_call *call, u8 *pending)
 {
 	register unsigned long rax asm("rax") = call->rax;
 	register unsigned long rcx asm("rcx") = call->rcx;
@@ -216,7 +120,7 @@ static __always_inline void svsm_issue_call(struct svsm_call *call, u8 *pending)
 	call->r9_out  = r9;
 }
 
-static int svsm_perform_msr_protocol(struct svsm_call *call)
+int svsm_perform_msr_protocol(struct svsm_call *call)
 {
 	u8 pending = 0;
 	u64 val, resp;
@@ -247,63 +151,6 @@ static int svsm_perform_msr_protocol(struct svsm_call *call)
 	return svsm_process_result_codes(call);
 }
 
-static int svsm_perform_ghcb_protocol(struct ghcb *ghcb, struct svsm_call *call)
-{
-	struct es_em_ctxt ctxt;
-	u8 pending = 0;
-
-	vc_ghcb_invalidate(ghcb);
-
-	/*
-	 * Fill in protocol and format specifiers. This can be called very early
-	 * in the boot, so use rip-relative references as needed.
-	 */
-	ghcb->protocol_version = ghcb_version;
-	ghcb->ghcb_usage       = GHCB_DEFAULT_USAGE;
-
-	ghcb_set_sw_exit_code(ghcb, SVM_VMGEXIT_SNP_RUN_VMPL);
-	ghcb_set_sw_exit_info_1(ghcb, 0);
-	ghcb_set_sw_exit_info_2(ghcb, 0);
-
-	sev_es_wr_ghcb_msr(__pa(ghcb));
-
-	svsm_issue_call(call, &pending);
-
-	if (pending)
-		return -EINVAL;
-
-	switch (verify_exception_info(ghcb, &ctxt)) {
-	case ES_OK:
-		break;
-	case ES_EXCEPTION:
-		vc_forward_exception(&ctxt);
-		fallthrough;
-	default:
-		return -EINVAL;
-	}
-
-	return svsm_process_result_codes(call);
-}
-
-enum es_result sev_es_ghcb_hv_call(struct ghcb *ghcb,
-				   struct es_em_ctxt *ctxt,
-				   u64 exit_code, u64 exit_info_1,
-				   u64 exit_info_2)
-{
-	/* Fill in protocol and format specifiers */
-	ghcb->protocol_version = ghcb_version;
-	ghcb->ghcb_usage       = GHCB_DEFAULT_USAGE;
-
-	ghcb_set_sw_exit_code(ghcb, exit_code);
-	ghcb_set_sw_exit_info_1(ghcb, exit_info_1);
-	ghcb_set_sw_exit_info_2(ghcb, exit_info_2);
-
-	sev_es_wr_ghcb_msr(__pa(ghcb));
-	VMGEXIT();
-
-	return verify_exception_info(ghcb, ctxt);
-}
-
 static int __sev_cpuid_hv(u32 fn, int reg_idx, u32 *reg)
 {
 	u64 val;
@@ -342,44 +189,7 @@ static int __sev_cpuid_hv_msr(struct cpuid_leaf *leaf)
 	return ret;
 }
 
-static int __sev_cpuid_hv_ghcb(struct ghcb *ghcb, struct es_em_ctxt *ctxt, struct cpuid_leaf *leaf)
-{
-	u32 cr4 = native_read_cr4();
-	int ret;
-
-	ghcb_set_rax(ghcb, leaf->fn);
-	ghcb_set_rcx(ghcb, leaf->subfn);
-
-	if (cr4 & X86_CR4_OSXSAVE)
-		/* Safe to read xcr0 */
-		ghcb_set_xcr0(ghcb, xgetbv(XCR_XFEATURE_ENABLED_MASK));
-	else
-		/* xgetbv will cause #UD - use reset value for xcr0 */
-		ghcb_set_xcr0(ghcb, 1);
 
-	ret = sev_es_ghcb_hv_call(ghcb, ctxt, SVM_EXIT_CPUID, 0, 0);
-	if (ret != ES_OK)
-		return ret;
-
-	if (!(ghcb_rax_is_valid(ghcb) &&
-	      ghcb_rbx_is_valid(ghcb) &&
-	      ghcb_rcx_is_valid(ghcb) &&
-	      ghcb_rdx_is_valid(ghcb)))
-		return ES_VMM_ERROR;
-
-	leaf->eax = ghcb->save.rax;
-	leaf->ebx = ghcb->save.rbx;
-	leaf->ecx = ghcb->save.rcx;
-	leaf->edx = ghcb->save.rdx;
-
-	return ES_OK;
-}
-
-static int sev_cpuid_hv(struct ghcb *ghcb, struct es_em_ctxt *ctxt, struct cpuid_leaf *leaf)
-{
-	return ghcb ? __sev_cpuid_hv_ghcb(ghcb, ctxt, leaf)
-		    : __sev_cpuid_hv_msr(leaf);
-}
 
 /*
  * This may be called early while still running on the initial identity
@@ -412,7 +222,7 @@ const struct snp_cpuid_table *snp_cpuid_get_table(void)
  *
  * Return: XSAVE area size on success, 0 otherwise.
  */
-static u32 __head snp_cpuid_calc_xsave_size(u64 xfeatures_en, bool compacted)
+static u32 snp_cpuid_calc_xsave_size(u64 xfeatures_en, bool compacted)
 {
 	const struct snp_cpuid_table *cpuid_table = snp_cpuid_get_table();
 	u64 xfeatures_found = 0;
@@ -448,7 +258,7 @@ static u32 __head snp_cpuid_calc_xsave_size(u64 xfeatures_en, bool compacted)
 	return xsave_size;
 }
 
-static bool __head
+static bool
 snp_cpuid_get_validated_func(struct cpuid_leaf *leaf)
 {
 	const struct snp_cpuid_table *cpuid_table = snp_cpuid_get_table();
@@ -484,21 +294,21 @@ snp_cpuid_get_validated_func(struct cpuid_leaf *leaf)
 	return false;
 }
 
-static void snp_cpuid_hv(struct ghcb *ghcb, struct es_em_ctxt *ctxt, struct cpuid_leaf *leaf)
+static void snp_cpuid_hv_msr(void *ctx, struct cpuid_leaf *leaf)
 {
-	if (sev_cpuid_hv(ghcb, ctxt, leaf))
+	if (__sev_cpuid_hv_msr(leaf))
 		sev_es_terminate(SEV_TERM_SET_LINUX, GHCB_TERM_CPUID_HV);
 }
 
-static int __head
-snp_cpuid_postprocess(struct ghcb *ghcb, struct es_em_ctxt *ctxt,
-		      struct cpuid_leaf *leaf)
+static int
+snp_cpuid_postprocess(void (*cpuid_fn)(void *ctx, struct cpuid_leaf *leaf),
+		      void *ctx, struct cpuid_leaf *leaf)
 {
 	struct cpuid_leaf leaf_hv = *leaf;
 
 	switch (leaf->fn) {
 	case 0x1:
-		snp_cpuid_hv(ghcb, ctxt, &leaf_hv);
+		cpuid_fn(ctx, &leaf_hv);
 
 		/* initial APIC ID */
 		leaf->ebx = (leaf_hv.ebx & GENMASK(31, 24)) | (leaf->ebx & GENMASK(23, 0));
@@ -517,7 +327,7 @@ snp_cpuid_postprocess(struct ghcb *ghcb, struct es_em_ctxt *ctxt,
 		break;
 	case 0xB:
 		leaf_hv.subfn = 0;
-		snp_cpuid_hv(ghcb, ctxt, &leaf_hv);
+		cpuid_fn(ctx, &leaf_hv);
 
 		/* extended APIC ID */
 		leaf->edx = leaf_hv.edx;
@@ -565,7 +375,7 @@ snp_cpuid_postprocess(struct ghcb *ghcb, struct es_em_ctxt *ctxt,
 		}
 		break;
 	case 0x8000001E:
-		snp_cpuid_hv(ghcb, ctxt, &leaf_hv);
+		cpuid_fn(ctx, &leaf_hv);
 
 		/* extended APIC ID */
 		leaf->eax = leaf_hv.eax;
@@ -586,8 +396,8 @@ snp_cpuid_postprocess(struct ghcb *ghcb, struct es_em_ctxt *ctxt,
  * Returns -EOPNOTSUPP if feature not enabled. Any other non-zero return value
  * should be treated as fatal by caller.
  */
-int __head
-snp_cpuid(struct ghcb *ghcb, struct es_em_ctxt *ctxt, struct cpuid_leaf *leaf)
+int snp_cpuid(void (*cpuid_fn)(void *ctx, struct cpuid_leaf *leaf),
+	      void *ctx, struct cpuid_leaf *leaf)
 {
 	const struct snp_cpuid_table *cpuid_table = snp_cpuid_get_table();
 
@@ -621,7 +431,7 @@ snp_cpuid(struct ghcb *ghcb, struct es_em_ctxt *ctxt, struct cpuid_leaf *leaf)
 			return 0;
 	}
 
-	return snp_cpuid_postprocess(ghcb, ctxt, leaf);
+	return snp_cpuid_postprocess(cpuid_fn, ctx, leaf);
 }
 
 /*
@@ -629,7 +439,7 @@ snp_cpuid(struct ghcb *ghcb, struct es_em_ctxt *ctxt, struct cpuid_leaf *leaf)
  * page yet, so it only supports the MSR based communication with the
  * hypervisor and only the CPUID exit-code.
  */
-void __head do_vc_no_ghcb(struct pt_regs *regs, unsigned long exit_code)
+void do_vc_no_ghcb(struct pt_regs *regs, unsigned long exit_code)
 {
 	unsigned int subfn = lower_bits(regs->cx, 32);
 	unsigned int fn = lower_bits(regs->ax, 32);
@@ -648,13 +458,24 @@ void __head do_vc_no_ghcb(struct pt_regs *regs, unsigned long exit_code)
 	leaf.fn = fn;
 	leaf.subfn = subfn;
 
-	ret = snp_cpuid(NULL, NULL, &leaf);
+	/*
+	 * If SNP is active, then snp_cpuid() uses the CPUID table to obtain the
+	 * CPUID values (with possible HV interaction during post-processing of
+	 * the values). But if SNP is not active (no CPUID table present), then
+	 * snp_cpuid() returns -EOPNOTSUPP so that an SEV-ES guest can call the
+	 * HV to obtain the CPUID information.
+	 */
+	ret = snp_cpuid(snp_cpuid_hv_msr, NULL, &leaf);
 	if (!ret)
 		goto cpuid_done;
 
 	if (ret != -EOPNOTSUPP)
 		goto fail;
 
+	/*
+	 * This is reached by a SEV-ES guest and needs to invoke the HV for
+	 * the CPUID data.
+	 */
 	if (__sev_cpuid_hv_msr(&leaf))
 		goto fail;
 
@@ -705,7 +526,7 @@ struct cc_setup_data {
  * Search for a Confidential Computing blob passed in as a setup_data entry
  * via the Linux Boot Protocol.
  */
-static __head
+static __init
 struct cc_blob_sev_info *find_cc_blob_setup_data(struct boot_params *bp)
 {
 	struct cc_setup_data *sd = NULL;
@@ -733,7 +554,7 @@ struct cc_blob_sev_info *find_cc_blob_setup_data(struct boot_params *bp)
  * mapping needs to be updated in sync with all the changes to virtual memory
  * layout and related mapping facilities throughout the boot process.
  */
-static void __head setup_cpuid_table(const struct cc_blob_sev_info *cc_info)
+static void __init setup_cpuid_table(const struct cc_blob_sev_info *cc_info)
 {
 	const struct snp_cpuid_table *cpuid_table_fw, *cpuid_table;
 	int i;
@@ -761,13 +582,24 @@ static void __head setup_cpuid_table(const struct cc_blob_sev_info *cc_info)
 	}
 }
 
-static void __head svsm_pval_4k_page(unsigned long paddr, bool validate)
+static int svsm_call_msr_protocol(struct svsm_call *call)
+{
+	int ret;
+
+	do {
+		ret = svsm_perform_msr_protocol(call);
+	} while (ret == -EAGAIN);
+
+	return ret;
+}
+
+static void svsm_pval_4k_page(unsigned long paddr, bool validate,
+			      struct svsm_ca *caa, u64 caa_pa)
 {
 	struct svsm_pvalidate_call *pc;
 	struct svsm_call call = {};
 	unsigned long flags;
 	u64 pc_pa;
-	int ret;
 
 	/*
 	 * This can be called very early in the boot, use native functions in
@@ -775,48 +607,96 @@ static void __head svsm_pval_4k_page(unsigned long paddr, bool validate)
 	 */
 	flags = native_local_irq_save();
 
-	call.caa = svsm_get_caa();
+	call.caa = caa;
 
 	pc = (struct svsm_pvalidate_call *)call.caa->svsm_buffer;
-	pc_pa = svsm_get_caa_pa() + offsetof(struct svsm_ca, svsm_buffer);
+	pc_pa = caa_pa + offsetof(struct svsm_ca, svsm_buffer);
 
 	pc->num_entries = 1;
 	pc->cur_index   = 0;
 	pc->entry[0].page_size = RMP_PG_SIZE_4K;
 	pc->entry[0].action    = validate;
 	pc->entry[0].ignore_cf = 0;
+	pc->entry[0].rsvd      = 0;
 	pc->entry[0].pfn       = paddr >> PAGE_SHIFT;
 
 	/* Protocol 0, Call ID 1 */
 	call.rax = SVSM_CORE_CALL(SVSM_CORE_PVALIDATE);
 	call.rcx = pc_pa;
 
-	ret = svsm_perform_call_protocol(&call);
-	if (ret)
+	/*
+	 * Use the MSR protocol exclusively, so that this code is usable in
+	 * startup code where VA/PA translations of the GHCB page's address may
+	 * be problematic.
+	 */
+	if (svsm_call_msr_protocol(&call))
 		sev_es_terminate(SEV_TERM_SET_LINUX, GHCB_TERM_PVALIDATE);
 
 	native_local_irq_restore(flags);
 }
 
-static void __head pvalidate_4k_page(unsigned long vaddr, unsigned long paddr,
-				     bool validate)
+static void pvalidate_4k_page(unsigned long vaddr, unsigned long paddr,
+			      bool validate, struct svsm_ca *caa, u64 caa_pa)
 {
 	int ret;
 
 	if (snp_vmpl) {
-		svsm_pval_4k_page(paddr, validate);
+		svsm_pval_4k_page(paddr, validate, caa, caa_pa);
 	} else {
 		ret = pvalidate(vaddr, RMP_PG_SIZE_4K, validate);
 		if (ret)
 			sev_es_terminate(SEV_TERM_SET_LINUX, GHCB_TERM_PVALIDATE);
 	}
+
+	/*
+	 * If validating memory (making it private) and affected by the
+	 * cache-coherency vulnerability, perform the cache eviction mitigation.
+	 */
+	if (validate && sev_snp_needs_sfw)
+		sev_evict_cache((void *)vaddr, 1);
+}
+
+static void __page_state_change(unsigned long vaddr, unsigned long paddr,
+			        const struct psc_desc *desc)
+{
+	u64 val, msr;
+
+	/*
+	 * If private -> shared then invalidate the page before requesting the
+	 * state change in the RMP table.
+	 */
+	if (desc->op == SNP_PAGE_STATE_SHARED)
+		pvalidate_4k_page(vaddr, paddr, false, desc->ca, desc->caa_pa);
+
+	/* Save the current GHCB MSR value */
+	msr = sev_es_rd_ghcb_msr();
+
+	/* Issue VMGEXIT to change the page state in RMP table. */
+	sev_es_wr_ghcb_msr(GHCB_MSR_PSC_REQ_GFN(paddr >> PAGE_SHIFT, desc->op));
+	VMGEXIT();
+
+	/* Read the response of the VMGEXIT. */
+	val = sev_es_rd_ghcb_msr();
+	if ((GHCB_RESP_CODE(val) != GHCB_MSR_PSC_RESP) || GHCB_MSR_PSC_RESP_VAL(val))
+		sev_es_terminate(SEV_TERM_SET_LINUX, GHCB_TERM_PSC);
+
+	/* Restore the GHCB MSR value */
+	sev_es_wr_ghcb_msr(msr);
+
+	/*
+	 * Now that page state is changed in the RMP table, validate it so that it is
+	 * consistent with the RMP entry.
+	 */
+	if (desc->op == SNP_PAGE_STATE_PRIVATE)
+		pvalidate_4k_page(vaddr, paddr, true, desc->ca, desc->caa_pa);
 }
 
 /*
  * Maintain the GPA of the SVSM Calling Area (CA) in order to utilize the SVSM
  * services needed when not running in VMPL0.
  */
-static bool __head svsm_setup_ca(const struct cc_blob_sev_info *cc_info)
+static bool __init svsm_setup_ca(const struct cc_blob_sev_info *cc_info,
+				 void *page)
 {
 	struct snp_secrets_page *secrets_page;
 	struct snp_cpuid_table *cpuid_table;
@@ -839,7 +719,7 @@ static bool __head svsm_setup_ca(const struct cc_blob_sev_info *cc_info)
 	 * routine is running identity mapped when called, both by the decompressor
 	 * code and the early kernel code.
 	 */
-	if (!rmpadjust((unsigned long)rip_rel_ptr(&boot_ghcb_page), RMP_PG_SIZE_4K, 1))
+	if (!rmpadjust((unsigned long)page, RMP_PG_SIZE_4K, 1))
 		return false;
 
 	/*
@@ -867,11 +747,6 @@ static bool __head svsm_setup_ca(const struct cc_blob_sev_info *cc_info)
 	if (caa & (PAGE_SIZE - 1))
 		sev_es_terminate(SEV_TERM_SET_LINUX, GHCB_TERM_SVSM_CAA);
 
-	/*
-	 * The CA is identity mapped when this routine is called, both by the
-	 * decompressor code and the early kernel code.
-	 */
-	boot_svsm_caa = (struct svsm_ca *)caa;
 	boot_svsm_caa_pa = caa;
 
 	/* Advertise the SVSM presence via CPUID. */
diff --git a/arch/x86/boot/startup/sev-startup.c b/arch/x86/boot/startup/sev-startup.c
index 0b7e3b950183..09725428d3e6 100644
--- a/arch/x86/boot/startup/sev-startup.c
+++ b/arch/x86/boot/startup/sev-startup.c
@@ -41,143 +41,14 @@
 #include <asm/cpuid/api.h>
 #include <asm/cmdline.h>
 
-/* For early boot hypervisor communication in SEV-ES enabled guests */
-struct ghcb boot_ghcb_page __bss_decrypted __aligned(PAGE_SIZE);
-
-/*
- * Needs to be in the .data section because we need it NULL before bss is
- * cleared
- */
-struct ghcb *boot_ghcb __section(".data");
-
-/* Bitmap of SEV features supported by the hypervisor */
-u64 sev_hv_features __ro_after_init;
-
-/* Secrets page physical address from the CC blob */
-u64 sev_secrets_pa __ro_after_init;
-
-/* For early boot SVSM communication */
-struct svsm_ca boot_svsm_ca_page __aligned(PAGE_SIZE);
-
-DEFINE_PER_CPU(struct svsm_ca *, svsm_caa);
-DEFINE_PER_CPU(u64, svsm_caa_pa);
-
-/*
- * Nothing shall interrupt this code path while holding the per-CPU
- * GHCB. The backup GHCB is only for NMIs interrupting this path.
- *
- * Callers must disable local interrupts around it.
- */
-noinstr struct ghcb *__sev_get_ghcb(struct ghcb_state *state)
-{
-	struct sev_es_runtime_data *data;
-	struct ghcb *ghcb;
-
-	WARN_ON(!irqs_disabled());
-
-	data = this_cpu_read(runtime_data);
-	ghcb = &data->ghcb_page;
-
-	if (unlikely(data->ghcb_active)) {
-		/* GHCB is already in use - save its contents */
-
-		if (unlikely(data->backup_ghcb_active)) {
-			/*
-			 * Backup-GHCB is also already in use. There is no way
-			 * to continue here so just kill the machine. To make
-			 * panic() work, mark GHCBs inactive so that messages
-			 * can be printed out.
-			 */
-			data->ghcb_active        = false;
-			data->backup_ghcb_active = false;
-
-			instrumentation_begin();
-			panic("Unable to handle #VC exception! GHCB and Backup GHCB are already in use");
-			instrumentation_end();
-		}
-
-		/* Mark backup_ghcb active before writing to it */
-		data->backup_ghcb_active = true;
-
-		state->ghcb = &data->backup_ghcb;
-
-		/* Backup GHCB content */
-		*state->ghcb = *ghcb;
-	} else {
-		state->ghcb = NULL;
-		data->ghcb_active = true;
-	}
-
-	return ghcb;
-}
-
 /* Include code shared with pre-decompression boot stage */
 #include "sev-shared.c"
 
-noinstr void __sev_put_ghcb(struct ghcb_state *state)
-{
-	struct sev_es_runtime_data *data;
-	struct ghcb *ghcb;
-
-	WARN_ON(!irqs_disabled());
-
-	data = this_cpu_read(runtime_data);
-	ghcb = &data->ghcb_page;
-
-	if (state->ghcb) {
-		/* Restore GHCB from Backup */
-		*ghcb = *state->ghcb;
-		data->backup_ghcb_active = false;
-		state->ghcb = NULL;
-	} else {
-		/*
-		 * Invalidate the GHCB so a VMGEXIT instruction issued
-		 * from userspace won't appear to be valid.
-		 */
-		vc_ghcb_invalidate(ghcb);
-		data->ghcb_active = false;
-	}
-}
-
-int svsm_perform_call_protocol(struct svsm_call *call)
-{
-	struct ghcb_state state;
-	unsigned long flags;
-	struct ghcb *ghcb;
-	int ret;
-
-	/*
-	 * This can be called very early in the boot, use native functions in
-	 * order to avoid paravirt issues.
-	 */
-	flags = native_local_irq_save();
-
-	if (sev_cfg.ghcbs_initialized)
-		ghcb = __sev_get_ghcb(&state);
-	else if (boot_ghcb)
-		ghcb = boot_ghcb;
-	else
-		ghcb = NULL;
-
-	do {
-		ret = ghcb ? svsm_perform_ghcb_protocol(ghcb, call)
-			   : svsm_perform_msr_protocol(call);
-	} while (ret == -EAGAIN);
-
-	if (sev_cfg.ghcbs_initialized)
-		__sev_put_ghcb(&state);
-
-	native_local_irq_restore(flags);
-
-	return ret;
-}
-
-void __head
+void
 early_set_pages_state(unsigned long vaddr, unsigned long paddr,
-		      unsigned long npages, enum psc_op op)
+		      unsigned long npages, const struct psc_desc *desc)
 {
 	unsigned long paddr_end;
-	u64 val;
 
 	vaddr = vaddr & PAGE_MASK;
 
@@ -185,42 +56,22 @@ early_set_pages_state(unsigned long vaddr, unsigned long paddr,
 	paddr_end = paddr + (npages << PAGE_SHIFT);
 
 	while (paddr < paddr_end) {
-		/* Page validation must be rescinded before changing to shared */
-		if (op == SNP_PAGE_STATE_SHARED)
-			pvalidate_4k_page(vaddr, paddr, false);
-
-		/*
-		 * Use the MSR protocol because this function can be called before
-		 * the GHCB is established.
-		 */
-		sev_es_wr_ghcb_msr(GHCB_MSR_PSC_REQ_GFN(paddr >> PAGE_SHIFT, op));
-		VMGEXIT();
-
-		val = sev_es_rd_ghcb_msr();
-
-		if (GHCB_RESP_CODE(val) != GHCB_MSR_PSC_RESP)
-			goto e_term;
-
-		if (GHCB_MSR_PSC_RESP_VAL(val))
-			goto e_term;
-
-		/* Page validation must be performed after changing to private */
-		if (op == SNP_PAGE_STATE_PRIVATE)
-			pvalidate_4k_page(vaddr, paddr, true);
+		__page_state_change(vaddr, paddr, desc);
 
 		vaddr += PAGE_SIZE;
 		paddr += PAGE_SIZE;
 	}
-
-	return;
-
-e_term:
-	sev_es_terminate(SEV_TERM_SET_LINUX, GHCB_TERM_PSC);
 }
 
-void __head early_snp_set_memory_private(unsigned long vaddr, unsigned long paddr,
+void __init early_snp_set_memory_private(unsigned long vaddr, unsigned long paddr,
 					 unsigned long npages)
 {
+	struct psc_desc d = {
+		SNP_PAGE_STATE_PRIVATE,
+		rip_rel_ptr(&boot_svsm_ca_page),
+		boot_svsm_caa_pa
+	};
+
 	/*
 	 * This can be invoked in early boot while running identity mapped, so
 	 * use an open coded check for SNP instead of using cc_platform_has().
@@ -234,12 +85,18 @@ void __head early_snp_set_memory_private(unsigned long vaddr, unsigned long padd
 	  * Ask the hypervisor to mark the memory pages as private in the RMP
 	  * table.
 	  */
-	early_set_pages_state(vaddr, paddr, npages, SNP_PAGE_STATE_PRIVATE);
+	early_set_pages_state(vaddr, paddr, npages, &d);
 }
 
-void __head early_snp_set_memory_shared(unsigned long vaddr, unsigned long paddr,
+void __init early_snp_set_memory_shared(unsigned long vaddr, unsigned long paddr,
 					unsigned long npages)
 {
+	struct psc_desc d = {
+		SNP_PAGE_STATE_SHARED,
+		rip_rel_ptr(&boot_svsm_ca_page),
+		boot_svsm_caa_pa
+	};
+
 	/*
 	 * This can be invoked in early boot while running identity mapped, so
 	 * use an open coded check for SNP instead of using cc_platform_has().
@@ -250,7 +107,7 @@ void __head early_snp_set_memory_shared(unsigned long vaddr, unsigned long paddr
 		return;
 
 	 /* Ask hypervisor to mark the memory pages shared in the RMP table. */
-	early_set_pages_state(vaddr, paddr, npages, SNP_PAGE_STATE_SHARED);
+	early_set_pages_state(vaddr, paddr, npages, &d);
 }
 
 /*
@@ -266,7 +123,7 @@ void __head early_snp_set_memory_shared(unsigned long vaddr, unsigned long paddr
  *
  * Scan for the blob in that order.
  */
-static __head struct cc_blob_sev_info *find_cc_blob(struct boot_params *bp)
+static struct cc_blob_sev_info *__init find_cc_blob(struct boot_params *bp)
 {
 	struct cc_blob_sev_info *cc_info;
 
@@ -287,15 +144,15 @@ static __head struct cc_blob_sev_info *find_cc_blob(struct boot_params *bp)
 
 found_cc_info:
 	if (cc_info->magic != CC_BLOB_SEV_HDR_MAGIC)
-		snp_abort();
+		sev_es_terminate(SEV_TERM_SET_GEN, GHCB_SNP_UNSUPPORTED);
 
 	return cc_info;
 }
 
-static __head void svsm_setup(struct cc_blob_sev_info *cc_info)
+static void __init svsm_setup(struct cc_blob_sev_info *cc_info)
 {
+	struct snp_secrets_page *secrets = (void *)cc_info->secrets_phys;
 	struct svsm_call call = {};
-	int ret;
 	u64 pa;
 
 	/*
@@ -303,7 +160,7 @@ static __head void svsm_setup(struct cc_blob_sev_info *cc_info)
 	 * running at VMPL0. The CA will be used to communicate with the
 	 * SVSM to perform the SVSM services.
 	 */
-	if (!svsm_setup_ca(cc_info))
+	if (!svsm_setup_ca(cc_info, rip_rel_ptr(&boot_svsm_ca_page)))
 		return;
 
 	/*
@@ -315,25 +172,25 @@ static __head void svsm_setup(struct cc_blob_sev_info *cc_info)
 	pa = (u64)rip_rel_ptr(&boot_svsm_ca_page);
 
 	/*
-	 * Switch over to the boot SVSM CA while the current CA is still
-	 * addressable. There is no GHCB at this point so use the MSR protocol.
+	 * Switch over to the boot SVSM CA while the current CA is still 1:1
+	 * mapped and thus addressable with VA == PA. There is no GHCB at this
+	 * point so use the MSR protocol.
 	 *
 	 * SVSM_CORE_REMAP_CA call:
 	 *   RAX = 0 (Protocol=0, CallID=0)
 	 *   RCX = New CA GPA
 	 */
-	call.caa = svsm_get_caa();
+	call.caa = (struct svsm_ca *)secrets->svsm_caa;
 	call.rax = SVSM_CORE_CALL(SVSM_CORE_REMAP_CA);
 	call.rcx = pa;
-	ret = svsm_perform_call_protocol(&call);
-	if (ret)
+
+	if (svsm_call_msr_protocol(&call))
 		sev_es_terminate(SEV_TERM_SET_LINUX, GHCB_TERM_SVSM_CA_REMAP_FAIL);
 
-	boot_svsm_caa = (struct svsm_ca *)pa;
 	boot_svsm_caa_pa = pa;
 }
 
-bool __head snp_init(struct boot_params *bp)
+bool __init snp_init(struct boot_params *bp)
 {
 	struct cc_blob_sev_info *cc_info;
 
@@ -361,8 +218,3 @@ bool __head snp_init(struct boot_params *bp)
 
 	return true;
 }
-
-void __head __noreturn snp_abort(void)
-{
-	sev_es_terminate(SEV_TERM_SET_GEN, GHCB_SNP_UNSUPPORTED);
-}
diff --git a/arch/x86/boot/startup/sme.c b/arch/x86/boot/startup/sme.c
index 70ea1748c0a7..e7ea65f3f1d6 100644
--- a/arch/x86/boot/startup/sme.c
+++ b/arch/x86/boot/startup/sme.c
@@ -91,7 +91,7 @@ struct sme_populate_pgd_data {
  */
 static char sme_workarea[2 * PMD_SIZE] __section(".init.scratch");
 
-static void __head sme_clear_pgd(struct sme_populate_pgd_data *ppd)
+static void __init sme_clear_pgd(struct sme_populate_pgd_data *ppd)
 {
 	unsigned long pgd_start, pgd_end, pgd_size;
 	pgd_t *pgd_p;
@@ -106,7 +106,7 @@ static void __head sme_clear_pgd(struct sme_populate_pgd_data *ppd)
 	memset(pgd_p, 0, pgd_size);
 }
 
-static pud_t __head *sme_prepare_pgd(struct sme_populate_pgd_data *ppd)
+static pud_t __init *sme_prepare_pgd(struct sme_populate_pgd_data *ppd)
 {
 	pgd_t *pgd;
 	p4d_t *p4d;
@@ -143,7 +143,7 @@ static pud_t __head *sme_prepare_pgd(struct sme_populate_pgd_data *ppd)
 	return pud;
 }
 
-static void __head sme_populate_pgd_large(struct sme_populate_pgd_data *ppd)
+static void __init sme_populate_pgd_large(struct sme_populate_pgd_data *ppd)
 {
 	pud_t *pud;
 	pmd_t *pmd;
@@ -159,7 +159,7 @@ static void __head sme_populate_pgd_large(struct sme_populate_pgd_data *ppd)
 	set_pmd(pmd, __pmd(ppd->paddr | ppd->pmd_flags));
 }
 
-static void __head sme_populate_pgd(struct sme_populate_pgd_data *ppd)
+static void __init sme_populate_pgd(struct sme_populate_pgd_data *ppd)
 {
 	pud_t *pud;
 	pmd_t *pmd;
@@ -185,7 +185,7 @@ static void __head sme_populate_pgd(struct sme_populate_pgd_data *ppd)
 		set_pte(pte, __pte(ppd->paddr | ppd->pte_flags));
 }
 
-static void __head __sme_map_range_pmd(struct sme_populate_pgd_data *ppd)
+static void __init __sme_map_range_pmd(struct sme_populate_pgd_data *ppd)
 {
 	while (ppd->vaddr < ppd->vaddr_end) {
 		sme_populate_pgd_large(ppd);
@@ -195,7 +195,7 @@ static void __head __sme_map_range_pmd(struct sme_populate_pgd_data *ppd)
 	}
 }
 
-static void __head __sme_map_range_pte(struct sme_populate_pgd_data *ppd)
+static void __init __sme_map_range_pte(struct sme_populate_pgd_data *ppd)
 {
 	while (ppd->vaddr < ppd->vaddr_end) {
 		sme_populate_pgd(ppd);
@@ -205,7 +205,7 @@ static void __head __sme_map_range_pte(struct sme_populate_pgd_data *ppd)
 	}
 }
 
-static void __head __sme_map_range(struct sme_populate_pgd_data *ppd,
+static void __init __sme_map_range(struct sme_populate_pgd_data *ppd,
 				   pmdval_t pmd_flags, pteval_t pte_flags)
 {
 	unsigned long vaddr_end;
@@ -229,22 +229,22 @@ static void __head __sme_map_range(struct sme_populate_pgd_data *ppd,
 	__sme_map_range_pte(ppd);
 }
 
-static void __head sme_map_range_encrypted(struct sme_populate_pgd_data *ppd)
+static void __init sme_map_range_encrypted(struct sme_populate_pgd_data *ppd)
 {
 	__sme_map_range(ppd, PMD_FLAGS_ENC, PTE_FLAGS_ENC);
 }
 
-static void __head sme_map_range_decrypted(struct sme_populate_pgd_data *ppd)
+static void __init sme_map_range_decrypted(struct sme_populate_pgd_data *ppd)
 {
 	__sme_map_range(ppd, PMD_FLAGS_DEC, PTE_FLAGS_DEC);
 }
 
-static void __head sme_map_range_decrypted_wp(struct sme_populate_pgd_data *ppd)
+static void __init sme_map_range_decrypted_wp(struct sme_populate_pgd_data *ppd)
 {
 	__sme_map_range(ppd, PMD_FLAGS_DEC_WP, PTE_FLAGS_DEC_WP);
 }
 
-static unsigned long __head sme_pgtable_calc(unsigned long len)
+static unsigned long __init sme_pgtable_calc(unsigned long len)
 {
 	unsigned long entries = 0, tables = 0;
 
@@ -281,7 +281,7 @@ static unsigned long __head sme_pgtable_calc(unsigned long len)
 	return entries + tables;
 }
 
-void __head sme_encrypt_kernel(struct boot_params *bp)
+void __init sme_encrypt_kernel(struct boot_params *bp)
 {
 	unsigned long workarea_start, workarea_end, workarea_len;
 	unsigned long execute_start, execute_end, execute_len;
@@ -485,7 +485,7 @@ void __head sme_encrypt_kernel(struct boot_params *bp)
 	native_write_cr3(__native_read_cr3());
 }
 
-void __head sme_enable(struct boot_params *bp)
+void __init sme_enable(struct boot_params *bp)
 {
 	unsigned int eax, ebx, ecx, edx;
 	unsigned long feature_mask;
@@ -521,6 +521,7 @@ void __head sme_enable(struct boot_params *bp)
 		return;
 
 	me_mask = 1UL << (ebx & 0x3f);
+	sev_snp_needs_sfw = !(ebx & BIT(31));
 
 	/* Check the SEV MSR whether SEV or SME is enabled */
 	sev_status = msr = native_rdmsrq(MSR_AMD64_SEV);
@@ -531,7 +532,7 @@ void __head sme_enable(struct boot_params *bp)
 	 * enablement abort the guest.
 	 */
 	if (snp_en ^ !!(msr & MSR_AMD64_SEV_SNP_ENABLED))
-		snp_abort();
+		sev_es_terminate(SEV_TERM_SET_GEN, GHCB_SNP_UNSUPPORTED);
 
 	/* Check if memory encryption is enabled */
 	if (feature_mask == AMD_SME_BIT) {
@@ -567,7 +568,6 @@ void __head sme_enable(struct boot_params *bp)
 
 #ifdef CONFIG_MITIGATION_PAGE_TABLE_ISOLATION
 /* Local version for startup code, which never operates on user page tables */
-__weak
 pgd_t __pti_set_user_pgtbl(pgd_t *pgdp, pgd_t pgd)
 {
 	return pgd;
diff --git a/arch/x86/coco/core.c b/arch/x86/coco/core.c
index d4610af68114..989ca9f72ba3 100644
--- a/arch/x86/coco/core.c
+++ b/arch/x86/coco/core.c
@@ -104,6 +104,9 @@ static bool noinstr amd_cc_platform_has(enum cc_attr attr)
 	case CC_ATTR_HOST_SEV_SNP:
 		return cc_flags.host_sev_snp;
 
+	case CC_ATTR_SNP_SECURE_AVIC:
+		return sev_status & MSR_AMD64_SNP_SECURE_AVIC;
+
 	default:
 		return false;
 	}
diff --git a/arch/x86/coco/sev/Makefile b/arch/x86/coco/sev/Makefile
index 342d79f0ab6a..3b8ae214a6a6 100644
--- a/arch/x86/coco/sev/Makefile
+++ b/arch/x86/coco/sev/Makefile
@@ -1,10 +1,10 @@
 # SPDX-License-Identifier: GPL-2.0
 
-obj-y += core.o sev-nmi.o vc-handle.o
+obj-y += core.o noinstr.o vc-handle.o
 
 # Clang 14 and older may fail to respect __no_sanitize_undefined when inlining
-UBSAN_SANITIZE_sev-nmi.o	:= n
+UBSAN_SANITIZE_noinstr.o	:= n
 
 # GCC may fail to respect __no_sanitize_address or __no_kcsan when inlining
-KASAN_SANITIZE_sev-nmi.o	:= n
-KCSAN_SANITIZE_sev-nmi.o	:= n
+KASAN_SANITIZE_noinstr.o	:= n
+KCSAN_SANITIZE_noinstr.o	:= n
diff --git a/arch/x86/coco/sev/core.c b/arch/x86/coco/sev/core.c
index fc59ce78c477..9ae3b11754e6 100644
--- a/arch/x86/coco/sev/core.c
+++ b/arch/x86/coco/sev/core.c
@@ -46,6 +46,48 @@
 #include <asm/cmdline.h>
 #include <asm/msr.h>
 
+/* Bitmap of SEV features supported by the hypervisor */
+u64 sev_hv_features __ro_after_init;
+SYM_PIC_ALIAS(sev_hv_features);
+
+/* Secrets page physical address from the CC blob */
+u64 sev_secrets_pa __ro_after_init;
+SYM_PIC_ALIAS(sev_secrets_pa);
+
+/* For early boot SVSM communication */
+struct svsm_ca boot_svsm_ca_page __aligned(PAGE_SIZE);
+SYM_PIC_ALIAS(boot_svsm_ca_page);
+
+/*
+ * SVSM related information:
+ *   During boot, the page tables are set up as identity mapped and later
+ *   changed to use kernel virtual addresses. Maintain separate virtual and
+ *   physical addresses for the CAA to allow SVSM functions to be used during
+ *   early boot, both with identity mapped virtual addresses and proper kernel
+ *   virtual addresses.
+ */
+u64 boot_svsm_caa_pa __ro_after_init;
+SYM_PIC_ALIAS(boot_svsm_caa_pa);
+
+DEFINE_PER_CPU(struct svsm_ca *, svsm_caa);
+DEFINE_PER_CPU(u64, svsm_caa_pa);
+
+static inline struct svsm_ca *svsm_get_caa(void)
+{
+	if (sev_cfg.use_cas)
+		return this_cpu_read(svsm_caa);
+	else
+		return rip_rel_ptr(&boot_svsm_ca_page);
+}
+
+static inline u64 svsm_get_caa_pa(void)
+{
+	if (sev_cfg.use_cas)
+		return this_cpu_read(svsm_caa_pa);
+	else
+		return boot_svsm_caa_pa;
+}
+
 /* AP INIT values as documented in the APM2  section "Processor Initialization State" */
 #define AP_INIT_CS_LIMIT		0xffff
 #define AP_INIT_DS_LIMIT		0xffff
@@ -79,6 +121,7 @@ static const char * const sev_status_feat_names[] = {
 	[MSR_AMD64_SNP_IBS_VIRT_BIT]		= "IBSVirt",
 	[MSR_AMD64_SNP_VMSA_REG_PROT_BIT]	= "VMSARegProt",
 	[MSR_AMD64_SNP_SMT_PROT_BIT]		= "SMTProt",
+	[MSR_AMD64_SNP_SECURE_AVIC_BIT]		= "SecureAVIC",
 };
 
 /*
@@ -100,6 +143,26 @@ DEFINE_PER_CPU(struct sev_es_save_area *, sev_vmsa);
  */
 u8 snp_vmpl __ro_after_init;
 EXPORT_SYMBOL_GPL(snp_vmpl);
+SYM_PIC_ALIAS(snp_vmpl);
+
+/*
+ * Since feature negotiation related variables are set early in the boot
+ * process they must reside in the .data section so as not to be zeroed
+ * out when the .bss section is later cleared.
+ *
+ * GHCB protocol version negotiated with the hypervisor.
+ */
+u16 ghcb_version __ro_after_init;
+SYM_PIC_ALIAS(ghcb_version);
+
+/* For early boot hypervisor communication in SEV-ES enabled guests */
+static struct ghcb boot_ghcb_page __bss_decrypted __aligned(PAGE_SIZE);
+
+/*
+ * Needs to be in the .data section because we need it NULL before bss is
+ * cleared
+ */
+struct ghcb *boot_ghcb __section(".data");
 
 static u64 __init get_snp_jump_table_addr(void)
 {
@@ -154,6 +217,73 @@ static u64 __init get_jump_table_addr(void)
 	return ret;
 }
 
+static int svsm_perform_ghcb_protocol(struct ghcb *ghcb, struct svsm_call *call)
+{
+	struct es_em_ctxt ctxt;
+	u8 pending = 0;
+
+	vc_ghcb_invalidate(ghcb);
+
+	/*
+	 * Fill in protocol and format specifiers. This can be called very early
+	 * in the boot, so use rip-relative references as needed.
+	 */
+	ghcb->protocol_version = ghcb_version;
+	ghcb->ghcb_usage       = GHCB_DEFAULT_USAGE;
+
+	ghcb_set_sw_exit_code(ghcb, SVM_VMGEXIT_SNP_RUN_VMPL);
+	ghcb_set_sw_exit_info_1(ghcb, 0);
+	ghcb_set_sw_exit_info_2(ghcb, 0);
+
+	sev_es_wr_ghcb_msr(__pa(ghcb));
+
+	svsm_issue_call(call, &pending);
+
+	if (pending)
+		return -EINVAL;
+
+	switch (verify_exception_info(ghcb, &ctxt)) {
+	case ES_OK:
+		break;
+	case ES_EXCEPTION:
+		vc_forward_exception(&ctxt);
+		fallthrough;
+	default:
+		return -EINVAL;
+	}
+
+	return svsm_process_result_codes(call);
+}
+
+static int svsm_perform_call_protocol(struct svsm_call *call)
+{
+	struct ghcb_state state;
+	unsigned long flags;
+	struct ghcb *ghcb;
+	int ret;
+
+	flags = native_local_irq_save();
+
+	if (sev_cfg.ghcbs_initialized)
+		ghcb = __sev_get_ghcb(&state);
+	else if (boot_ghcb)
+		ghcb = boot_ghcb;
+	else
+		ghcb = NULL;
+
+	do {
+		ret = ghcb ? svsm_perform_ghcb_protocol(ghcb, call)
+			   : __pi_svsm_perform_msr_protocol(call);
+	} while (ret == -EAGAIN);
+
+	if (sev_cfg.ghcbs_initialized)
+		__sev_put_ghcb(&state);
+
+	native_local_irq_restore(flags);
+
+	return ret;
+}
+
 static inline void __pval_terminate(u64 pfn, bool action, unsigned int page_size,
 				    int ret, u64 svsm_ret)
 {
@@ -227,6 +357,7 @@ static u64 svsm_build_ca_from_pfn_range(u64 pfn, u64 pfn_end, bool action,
 		pe->page_size = RMP_PG_SIZE_4K;
 		pe->action    = action;
 		pe->ignore_cf = 0;
+		pe->rsvd      = 0;
 		pe->pfn       = pfn;
 
 		pe++;
@@ -257,6 +388,7 @@ static int svsm_build_ca_from_psc_desc(struct snp_psc_desc *desc, unsigned int d
 		pe->page_size = e->pagesize ? RMP_PG_SIZE_2M : RMP_PG_SIZE_4K;
 		pe->action    = e->operation == SNP_PAGE_STATE_PRIVATE;
 		pe->ignore_cf = 0;
+		pe->rsvd      = 0;
 		pe->pfn       = e->gfn;
 
 		pe++;
@@ -358,10 +490,31 @@ static void svsm_pval_pages(struct snp_psc_desc *desc)
 
 static void pvalidate_pages(struct snp_psc_desc *desc)
 {
+	struct psc_entry *e;
+	unsigned int i;
+
 	if (snp_vmpl)
 		svsm_pval_pages(desc);
 	else
 		pval_pages(desc);
+
+	/*
+	 * If not affected by the cache-coherency vulnerability there is no need
+	 * to perform the cache eviction mitigation.
+	 */
+	if (cpu_feature_enabled(X86_FEATURE_COHERENCY_SFW_NO))
+		return;
+
+	for (i = 0; i <= desc->hdr.end_entry; i++) {
+		e = &desc->entries[i];
+
+		/*
+		 * If validating memory (making it private) perform the cache
+		 * eviction mitigation.
+		 */
+		if (e->operation == SNP_PAGE_STATE_PRIVATE)
+			sev_evict_cache(pfn_to_kaddr(e->gfn), e->pagesize ? 512 : 1);
+	}
 }
 
 static int vmgexit_psc(struct ghcb *ghcb, struct snp_psc_desc *desc)
@@ -508,8 +661,11 @@ static void set_pages_state(unsigned long vaddr, unsigned long npages, int op)
 	unsigned long vaddr_end;
 
 	/* Use the MSR protocol when a GHCB is not available. */
-	if (!boot_ghcb)
-		return early_set_pages_state(vaddr, __pa(vaddr), npages, op);
+	if (!boot_ghcb) {
+		struct psc_desc d = { op, svsm_get_caa(), svsm_get_caa_pa() };
+
+		return early_set_pages_state(vaddr, __pa(vaddr), npages, &d);
+	}
 
 	vaddr = vaddr & PAGE_MASK;
 	vaddr_end = vaddr + (npages << PAGE_SHIFT);
@@ -950,6 +1106,9 @@ static int wakeup_cpu_via_vmgexit(u32 apic_id, unsigned long start_ip, unsigned
 	vmsa->x87_ftw		= AP_INIT_X87_FTW_DEFAULT;
 	vmsa->x87_fcw		= AP_INIT_X87_FCW_DEFAULT;
 
+	if (cc_platform_has(CC_ATTR_SNP_SECURE_AVIC))
+		vmsa->vintr_ctrl |= V_GIF_MASK | V_NMI_ENABLE_MASK;
+
 	/* SVME must be set. */
 	vmsa->efer		= EFER_SVME;
 
@@ -1084,6 +1243,105 @@ int __init sev_es_efi_map_ghcbs_cas(pgd_t *pgd)
 	return 0;
 }
 
+u64 savic_ghcb_msr_read(u32 reg)
+{
+	u64 msr = APIC_BASE_MSR + (reg >> 4);
+	struct pt_regs regs = { .cx = msr };
+	struct es_em_ctxt ctxt = { .regs = &regs };
+	struct ghcb_state state;
+	enum es_result res;
+	struct ghcb *ghcb;
+
+	guard(irqsave)();
+
+	ghcb = __sev_get_ghcb(&state);
+	vc_ghcb_invalidate(ghcb);
+
+	res = sev_es_ghcb_handle_msr(ghcb, &ctxt, false);
+	if (res != ES_OK) {
+		pr_err("Secure AVIC MSR (0x%llx) read returned error (%d)\n", msr, res);
+		/* MSR read failures are treated as fatal errors */
+		sev_es_terminate(SEV_TERM_SET_LINUX, GHCB_TERM_SAVIC_FAIL);
+	}
+
+	__sev_put_ghcb(&state);
+
+	return regs.ax | regs.dx << 32;
+}
+
+void savic_ghcb_msr_write(u32 reg, u64 value)
+{
+	u64 msr = APIC_BASE_MSR + (reg >> 4);
+	struct pt_regs regs = {
+		.cx = msr,
+		.ax = lower_32_bits(value),
+		.dx = upper_32_bits(value)
+	};
+	struct es_em_ctxt ctxt = { .regs = &regs };
+	struct ghcb_state state;
+	enum es_result res;
+	struct ghcb *ghcb;
+
+	guard(irqsave)();
+
+	ghcb = __sev_get_ghcb(&state);
+	vc_ghcb_invalidate(ghcb);
+
+	res = sev_es_ghcb_handle_msr(ghcb, &ctxt, true);
+	if (res != ES_OK) {
+		pr_err("Secure AVIC MSR (0x%llx) write returned error (%d)\n", msr, res);
+		/* MSR writes should never fail. Any failure is fatal error for SNP guest */
+		sev_es_terminate(SEV_TERM_SET_LINUX, GHCB_TERM_SAVIC_FAIL);
+	}
+
+	__sev_put_ghcb(&state);
+}
+
+enum es_result savic_register_gpa(u64 gpa)
+{
+	struct ghcb_state state;
+	struct es_em_ctxt ctxt;
+	enum es_result res;
+	struct ghcb *ghcb;
+
+	guard(irqsave)();
+
+	ghcb = __sev_get_ghcb(&state);
+	vc_ghcb_invalidate(ghcb);
+
+	ghcb_set_rax(ghcb, SVM_VMGEXIT_SAVIC_SELF_GPA);
+	ghcb_set_rbx(ghcb, gpa);
+	res = sev_es_ghcb_hv_call(ghcb, &ctxt, SVM_VMGEXIT_SAVIC,
+				  SVM_VMGEXIT_SAVIC_REGISTER_GPA, 0);
+
+	__sev_put_ghcb(&state);
+
+	return res;
+}
+
+enum es_result savic_unregister_gpa(u64 *gpa)
+{
+	struct ghcb_state state;
+	struct es_em_ctxt ctxt;
+	enum es_result res;
+	struct ghcb *ghcb;
+
+	guard(irqsave)();
+
+	ghcb = __sev_get_ghcb(&state);
+	vc_ghcb_invalidate(ghcb);
+
+	ghcb_set_rax(ghcb, SVM_VMGEXIT_SAVIC_SELF_GPA);
+	res = sev_es_ghcb_hv_call(ghcb, &ctxt, SVM_VMGEXIT_SAVIC,
+				  SVM_VMGEXIT_SAVIC_UNREGISTER_GPA, 0);
+	if (gpa && res == ES_OK)
+		*gpa = ghcb->save.rbx;
+
+	__sev_put_ghcb(&state);
+
+	return res;
+}
+
 static void snp_register_per_cpu_ghcb(void)
 {
 	struct sev_es_runtime_data *data;
@@ -1210,7 +1468,8 @@ static void __init alloc_runtime_data(int cpu)
 		struct svsm_ca *caa;
 
 		/* Allocate the SVSM CA page if an SVSM is present */
-		caa = memblock_alloc_or_panic(sizeof(*caa), PAGE_SIZE);
+		caa = cpu ? memblock_alloc_or_panic(sizeof(*caa), PAGE_SIZE)
+			  : &boot_svsm_ca_page;
 
 		per_cpu(svsm_caa, cpu) = caa;
 		per_cpu(svsm_caa_pa, cpu) = __pa(caa);
@@ -1264,32 +1523,9 @@ void __init sev_es_init_vc_handling(void)
 		init_ghcb(cpu);
 	}
 
-	/* If running under an SVSM, switch to the per-cpu CA */
-	if (snp_vmpl) {
-		struct svsm_call call = {};
-		unsigned long flags;
-		int ret;
-
-		local_irq_save(flags);
-
-		/*
-		 * SVSM_CORE_REMAP_CA call:
-		 *   RAX = 0 (Protocol=0, CallID=0)
-		 *   RCX = New CA GPA
-		 */
-		call.caa = svsm_get_caa();
-		call.rax = SVSM_CORE_CALL(SVSM_CORE_REMAP_CA);
-		call.rcx = this_cpu_read(svsm_caa_pa);
-		ret = svsm_perform_call_protocol(&call);
-		if (ret)
-			panic("Can't remap the SVSM CA, ret=%d, rax_out=0x%llx\n",
-			      ret, call.rax_out);
-
+	if (snp_vmpl)
 		sev_cfg.use_cas = true;
 
-		local_irq_restore(flags);
-	}
-
 	sev_es_setup_play_dead();
 
 	/* Secondary CPUs use the runtime #VC handler */
@@ -1567,15 +1803,6 @@ void sev_show_status(void)
 	pr_cont("\n");
 }
 
-void __init snp_update_svsm_ca(void)
-{
-	if (!snp_vmpl)
-		return;
-
-	/* Update the CAA to a proper kernel address */
-	boot_svsm_caa = &boot_svsm_ca_page;
-}
-
 #ifdef CONFIG_SYSFS
 static ssize_t vmpl_show(struct kobject *kobj,
 			 struct kobj_attribute *attr, char *buf)
diff --git a/arch/x86/coco/sev/sev-nmi.c b/arch/x86/coco/sev/noinstr.c
index d8dfaddfb367..b527eafb6312 100644
--- a/arch/x86/coco/sev/sev-nmi.c
+++ b/arch/x86/coco/sev/noinstr.c
@@ -106,3 +106,77 @@ void noinstr __sev_es_nmi_complete(void)
 
 	__sev_put_ghcb(&state);
 }
+
+/*
+ * Nothing shall interrupt this code path while holding the per-CPU
+ * GHCB. The backup GHCB is only for NMIs interrupting this path.
+ *
+ * Callers must disable local interrupts around it.
+ */
+noinstr struct ghcb *__sev_get_ghcb(struct ghcb_state *state)
+{
+	struct sev_es_runtime_data *data;
+	struct ghcb *ghcb;
+
+	WARN_ON(!irqs_disabled());
+
+	data = this_cpu_read(runtime_data);
+	ghcb = &data->ghcb_page;
+
+	if (unlikely(data->ghcb_active)) {
+		/* GHCB is already in use - save its contents */
+
+		if (unlikely(data->backup_ghcb_active)) {
+			/*
+			 * Backup-GHCB is also already in use. There is no way
+			 * to continue here so just kill the machine. To make
+			 * panic() work, mark GHCBs inactive so that messages
+			 * can be printed out.
+			 */
+			data->ghcb_active        = false;
+			data->backup_ghcb_active = false;
+
+			instrumentation_begin();
+			panic("Unable to handle #VC exception! GHCB and Backup GHCB are already in use");
+			instrumentation_end();
+		}
+
+		/* Mark backup_ghcb active before writing to it */
+		data->backup_ghcb_active = true;
+
+		state->ghcb = &data->backup_ghcb;
+
+		/* Backup GHCB content */
+		*state->ghcb = *ghcb;
+	} else {
+		state->ghcb = NULL;
+		data->ghcb_active = true;
+	}
+
+	return ghcb;
+}
+
+noinstr void __sev_put_ghcb(struct ghcb_state *state)
+{
+	struct sev_es_runtime_data *data;
+	struct ghcb *ghcb;
+
+	WARN_ON(!irqs_disabled());
+
+	data = this_cpu_read(runtime_data);
+	ghcb = &data->ghcb_page;
+
+	if (state->ghcb) {
+		/* Restore GHCB from Backup */
+		*ghcb = *state->ghcb;
+		data->backup_ghcb_active = false;
+		state->ghcb = NULL;
+	} else {
+		/*
+		 * Invalidate the GHCB so a VMGEXIT instruction issued
+		 * from userspace won't appear to be valid.
+		 */
+		vc_ghcb_invalidate(ghcb);
+		data->ghcb_active = false;
+	}
+}
diff --git a/arch/x86/coco/sev/vc-handle.c b/arch/x86/coco/sev/vc-handle.c
index faf1fce89ed4..7fc136a35334 100644
--- a/arch/x86/coco/sev/vc-handle.c
+++ b/arch/x86/coco/sev/vc-handle.c
@@ -351,6 +351,8 @@ fault:
 }
 
 #define sev_printk(fmt, ...)		printk(fmt, ##__VA_ARGS__)
+#define error(v)
+#define has_cpuflag(f)			boot_cpu_has(f)
 
 #include "vc-shared.c"
 
@@ -371,29 +373,30 @@ static enum es_result __vc_handle_msr_caa(struct pt_regs *regs, bool write)
  * executing with Secure TSC enabled, so special handling is required for
  * accesses of MSR_IA32_TSC and MSR_AMD64_GUEST_TSC_FREQ.
  */
-static enum es_result __vc_handle_secure_tsc_msrs(struct pt_regs *regs, bool write)
+static enum es_result __vc_handle_secure_tsc_msrs(struct es_em_ctxt *ctxt, bool write)
 {
+	struct pt_regs *regs = ctxt->regs;
 	u64 tsc;
 
 	/*
-	 * GUEST_TSC_FREQ should not be intercepted when Secure TSC is enabled.
-	 * Terminate the SNP guest when the interception is enabled.
+	 * Writing to MSR_IA32_TSC can cause subsequent reads of the TSC to
+	 * return undefined values, and GUEST_TSC_FREQ is read-only. Generate
+	 * a #GP on all writes.
 	 */
-	if (regs->cx == MSR_AMD64_GUEST_TSC_FREQ)
-		return ES_VMM_ERROR;
+	if (write) {
+		ctxt->fi.vector = X86_TRAP_GP;
+		ctxt->fi.error_code = 0;
+		return ES_EXCEPTION;
+	}
 
 	/*
-	 * Writes: Writing to MSR_IA32_TSC can cause subsequent reads of the TSC
-	 *         to return undefined values, so ignore all writes.
-	 *
-	 * Reads: Reads of MSR_IA32_TSC should return the current TSC value, use
-	 *        the value returned by rdtsc_ordered().
+	 * GUEST_TSC_FREQ read should not be intercepted when Secure TSC is
+	 * enabled. Terminate the guest if a read is attempted.
 	 */
-	if (write) {
-		WARN_ONCE(1, "TSC MSR writes are verboten!\n");
-		return ES_OK;
-	}
+	if (regs->cx == MSR_AMD64_GUEST_TSC_FREQ)
+		return ES_VMM_ERROR;
 
+	/* Reads of MSR_IA32_TSC should return the current TSC value. */
 	tsc = rdtsc_ordered();
 	regs->ax = lower_32_bits(tsc);
 	regs->dx = upper_32_bits(tsc);
@@ -401,14 +404,10 @@ static enum es_result __vc_handle_secure_tsc_msrs(struct pt_regs *regs, bool wri
 	return ES_OK;
 }
 
-static enum es_result vc_handle_msr(struct ghcb *ghcb, struct es_em_ctxt *ctxt)
+enum es_result sev_es_ghcb_handle_msr(struct ghcb *ghcb, struct es_em_ctxt *ctxt, bool write)
 {
 	struct pt_regs *regs = ctxt->regs;
 	enum es_result ret;
-	bool write;
-
-	/* Is it a WRMSR? */
-	write = ctxt->insn.opcode.bytes[1] == 0x30;
 
 	switch (regs->cx) {
 	case MSR_SVSM_CAA:
@@ -416,7 +415,16 @@ static enum es_result vc_handle_msr(struct ghcb *ghcb, struct es_em_ctxt *ctxt)
 	case MSR_IA32_TSC:
 	case MSR_AMD64_GUEST_TSC_FREQ:
 		if (sev_status & MSR_AMD64_SNP_SECURE_TSC)
-			return __vc_handle_secure_tsc_msrs(regs, write);
+			return __vc_handle_secure_tsc_msrs(ctxt, write);
+		break;
+	case MSR_AMD64_SAVIC_CONTROL:
+		/*
+		 * AMD64_SAVIC_CONTROL should not be intercepted when
+		 * Secure AVIC is enabled. Terminate the Secure AVIC guest
+		 * if the interception is enabled.
+		 */
+		if (cc_platform_has(CC_ATTR_SNP_SECURE_AVIC))
+			return ES_VMM_ERROR;
 		break;
 	default:
 		break;
@@ -438,6 +446,11 @@ static enum es_result vc_handle_msr(struct ghcb *ghcb, struct es_em_ctxt *ctxt)
 	return ret;
 }
 
+static enum es_result vc_handle_msr(struct ghcb *ghcb, struct es_em_ctxt *ctxt)
+{
+	return sev_es_ghcb_handle_msr(ghcb, ctxt, ctxt->insn.opcode.bytes[1] == 0x30);
+}
+
 static void __init vc_early_forward_exception(struct es_em_ctxt *ctxt)
 {
 	int trapnr = ctxt->fi.vector;
diff --git a/arch/x86/coco/sev/vc-shared.c b/arch/x86/coco/sev/vc-shared.c
index 2c0ab0fdc060..9b01c9ad81be 100644
--- a/arch/x86/coco/sev/vc-shared.c
+++ b/arch/x86/coco/sev/vc-shared.c
@@ -409,15 +409,109 @@ static enum es_result vc_handle_ioio(struct ghcb *ghcb, struct es_em_ctxt *ctxt)
 	return ret;
 }
 
+enum es_result verify_exception_info(struct ghcb *ghcb, struct es_em_ctxt *ctxt)
+{
+	u32 ret;
+
+	ret = ghcb->save.sw_exit_info_1 & GENMASK_ULL(31, 0);
+	if (!ret)
+		return ES_OK;
+
+	if (ret == 1) {
+		u64 info = ghcb->save.sw_exit_info_2;
+		unsigned long v = info & SVM_EVTINJ_VEC_MASK;
+
+		/* Check if exception information from hypervisor is sane. */
+		if ((info & SVM_EVTINJ_VALID) &&
+		    ((v == X86_TRAP_GP) || (v == X86_TRAP_UD)) &&
+		    ((info & SVM_EVTINJ_TYPE_MASK) == SVM_EVTINJ_TYPE_EXEPT)) {
+			ctxt->fi.vector = v;
+
+			if (info & SVM_EVTINJ_VALID_ERR)
+				ctxt->fi.error_code = info >> 32;
+
+			return ES_EXCEPTION;
+		}
+	}
+
+	return ES_VMM_ERROR;
+}
+
+enum es_result sev_es_ghcb_hv_call(struct ghcb *ghcb,
+				   struct es_em_ctxt *ctxt,
+				   u64 exit_code, u64 exit_info_1,
+				   u64 exit_info_2)
+{
+	/* Fill in protocol and format specifiers */
+	ghcb->protocol_version = ghcb_version;
+	ghcb->ghcb_usage       = GHCB_DEFAULT_USAGE;
+
+	ghcb_set_sw_exit_code(ghcb, exit_code);
+	ghcb_set_sw_exit_info_1(ghcb, exit_info_1);
+	ghcb_set_sw_exit_info_2(ghcb, exit_info_2);
+
+	sev_es_wr_ghcb_msr(__pa(ghcb));
+	VMGEXIT();
+
+	return verify_exception_info(ghcb, ctxt);
+}
+
+static int __sev_cpuid_hv_ghcb(struct ghcb *ghcb, struct es_em_ctxt *ctxt, struct cpuid_leaf *leaf)
+{
+	u32 cr4 = native_read_cr4();
+	int ret;
+
+	ghcb_set_rax(ghcb, leaf->fn);
+	ghcb_set_rcx(ghcb, leaf->subfn);
+
+	if (cr4 & X86_CR4_OSXSAVE)
+		/* Safe to read xcr0 */
+		ghcb_set_xcr0(ghcb, xgetbv(XCR_XFEATURE_ENABLED_MASK));
+	else
+		/* xgetbv will cause #UD - use reset value for xcr0 */
+		ghcb_set_xcr0(ghcb, 1);
+
+	ret = sev_es_ghcb_hv_call(ghcb, ctxt, SVM_EXIT_CPUID, 0, 0);
+	if (ret != ES_OK)
+		return ret;
+
+	if (!(ghcb_rax_is_valid(ghcb) &&
+	      ghcb_rbx_is_valid(ghcb) &&
+	      ghcb_rcx_is_valid(ghcb) &&
+	      ghcb_rdx_is_valid(ghcb)))
+		return ES_VMM_ERROR;
+
+	leaf->eax = ghcb->save.rax;
+	leaf->ebx = ghcb->save.rbx;
+	leaf->ecx = ghcb->save.rcx;
+	leaf->edx = ghcb->save.rdx;
+
+	return ES_OK;
+}
+
+struct cpuid_ctx {
+	struct ghcb *ghcb;
+	struct es_em_ctxt *ctxt;
+};
+
+static void snp_cpuid_hv_ghcb(void *p, struct cpuid_leaf *leaf)
+{
+	struct cpuid_ctx *ctx = p;
+
+	if (__sev_cpuid_hv_ghcb(ctx->ghcb, ctx->ctxt, leaf))
+		sev_es_terminate(SEV_TERM_SET_LINUX, GHCB_TERM_CPUID_HV);
+}
+
 static int vc_handle_cpuid_snp(struct ghcb *ghcb, struct es_em_ctxt *ctxt)
 {
+	struct cpuid_ctx ctx = { ghcb, ctxt };
 	struct pt_regs *regs = ctxt->regs;
 	struct cpuid_leaf leaf;
 	int ret;
 
 	leaf.fn = regs->ax;
 	leaf.subfn = regs->cx;
-	ret = snp_cpuid(ghcb, ctxt, &leaf);
+	ret = snp_cpuid(snp_cpuid_hv_ghcb, &ctx, &leaf);
 	if (!ret) {
 		regs->ax = leaf.eax;
 		regs->bx = leaf.ebx;
@@ -502,3 +596,50 @@ static enum es_result vc_handle_rdtsc(struct ghcb *ghcb,
 
 	return ES_OK;
 }
+
+void snp_register_ghcb_early(unsigned long paddr)
+{
+	unsigned long pfn = paddr >> PAGE_SHIFT;
+	u64 val;
+
+	sev_es_wr_ghcb_msr(GHCB_MSR_REG_GPA_REQ_VAL(pfn));
+	VMGEXIT();
+
+	val = sev_es_rd_ghcb_msr();
+
+	/* If the response GPA is not ours then abort the guest */
+	if ((GHCB_RESP_CODE(val) != GHCB_MSR_REG_GPA_RESP) ||
+	    (GHCB_MSR_REG_GPA_RESP_VAL(val) != pfn))
+		sev_es_terminate(SEV_TERM_SET_LINUX, GHCB_TERM_REGISTER);
+}
+
+bool __init sev_es_check_cpu_features(void)
+{
+	if (!has_cpuflag(X86_FEATURE_RDRAND)) {
+		error("RDRAND instruction not supported - no trusted source of randomness available\n");
+		return false;
+	}
+
+	return true;
+}
+
+bool sev_es_negotiate_protocol(void)
+{
+	u64 val;
+
+	/* Do the GHCB protocol version negotiation */
+	sev_es_wr_ghcb_msr(GHCB_MSR_SEV_INFO_REQ);
+	VMGEXIT();
+	val = sev_es_rd_ghcb_msr();
+
+	if (GHCB_MSR_INFO(val) != GHCB_MSR_SEV_INFO_RESP)
+		return false;
+
+	if (GHCB_MSR_PROTO_MAX(val) < GHCB_PROTOCOL_MIN ||
+	    GHCB_MSR_PROTO_MIN(val) > GHCB_PROTOCOL_MAX)
+		return false;
+
+	ghcb_version = min_t(size_t, GHCB_MSR_PROTO_MAX(val), GHCB_PROTOCOL_MAX);
+
+	return true;
+}
diff --git a/arch/x86/configs/xen.config b/arch/x86/configs/xen.config
index d5d091e03bd3..98b6952ba9d2 100644
--- a/arch/x86/configs/xen.config
+++ b/arch/x86/configs/xen.config
@@ -12,7 +12,6 @@ CONFIG_CPU_FREQ=y
 
 # x86 xen specific config options
 CONFIG_XEN_PVH=y
-CONFIG_XEN_SAVE_RESTORE=y
 # CONFIG_XEN_DEBUG_FS is not set
 CONFIG_XEN_MCE_LOG=y
 CONFIG_XEN_ACPI_PROCESSOR=m
diff --git a/arch/x86/crypto/Kconfig b/arch/x86/crypto/Kconfig
index 94016c60561e..d9c6fc78cf33 100644
--- a/arch/x86/crypto/Kconfig
+++ b/arch/x86/crypto/Kconfig
@@ -2,19 +2,6 @@
 
 menu "Accelerated Cryptographic Algorithms for CPU (x86)"
 
-config CRYPTO_CURVE25519_X86
-	tristate
-	depends on 64BIT
-	select CRYPTO_KPP
-	select CRYPTO_LIB_CURVE25519_GENERIC
-	select CRYPTO_ARCH_HAVE_LIB_CURVE25519
-	default CRYPTO_LIB_CURVE25519_INTERNAL
-	help
-	  Curve25519 algorithm
-
-	  Architecture: x86_64 using:
-	  - ADX (large integer arithmetic)
-
 config CRYPTO_AES_NI_INTEL
 	tristate "Ciphers: AES, modes: ECB, CBC, CTS, CTR, XCTR, XTS, GCM (AES-NI/VAES)"
 	select CRYPTO_AEAD
diff --git a/arch/x86/crypto/Makefile b/arch/x86/crypto/Makefile
index d402963d6b57..dfba7e5e88ea 100644
--- a/arch/x86/crypto/Makefile
+++ b/arch/x86/crypto/Makefile
@@ -62,8 +62,6 @@ nhpoly1305-sse2-y := nh-sse2-x86_64.o nhpoly1305-sse2-glue.o
 obj-$(CONFIG_CRYPTO_NHPOLY1305_AVX2) += nhpoly1305-avx2.o
 nhpoly1305-avx2-y := nh-avx2-x86_64.o nhpoly1305-avx2-glue.o
 
-obj-$(CONFIG_CRYPTO_CURVE25519_X86) += curve25519-x86_64.o
-
 obj-$(CONFIG_CRYPTO_SM3_AVX_X86_64) += sm3-avx-x86_64.o
 sm3-avx-x86_64-y := sm3-avx-asm_64.o sm3_avx_glue.o
 
@@ -81,6 +79,3 @@ aria-aesni-avx2-x86_64-y := aria-aesni-avx2-asm_64.o aria_aesni_avx2_glue.o
 
 obj-$(CONFIG_CRYPTO_ARIA_GFNI_AVX512_X86_64) += aria-gfni-avx512-x86_64.o
 aria-gfni-avx512-x86_64-y := aria-gfni-avx512-asm_64.o aria_gfni_avx512_glue.o
-
-# Disable GCOV in odd or sensitive code
-GCOV_PROFILE_curve25519-x86_64.o := n
diff --git a/arch/x86/crypto/curve25519-x86_64.c b/arch/x86/crypto/curve25519-x86_64.c
deleted file mode 100644
index d587f05c3c8c..000000000000
--- a/arch/x86/crypto/curve25519-x86_64.c
+++ /dev/null
@@ -1,1726 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0 OR MIT
-/*
- * Copyright (C) 2020 Jason A. Donenfeld <Jason@zx2c4.com>. All Rights Reserved.
- * Copyright (c) 2016-2020 INRIA, CMU and Microsoft Corporation
- */
-
-#include <crypto/curve25519.h>
-#include <crypto/internal/kpp.h>
-
-#include <linux/export.h>
-#include <linux/types.h>
-#include <linux/jump_label.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/scatterlist.h>
-
-#include <asm/cpufeature.h>
-#include <asm/processor.h>
-
-static __always_inline u64 eq_mask(u64 a, u64 b)
-{
-	u64 x = a ^ b;
-	u64 minus_x = ~x + (u64)1U;
-	u64 x_or_minus_x = x | minus_x;
-	u64 xnx = x_or_minus_x >> (u32)63U;
-	return xnx - (u64)1U;
-}
-
-static __always_inline u64 gte_mask(u64 a, u64 b)
-{
-	u64 x = a;
-	u64 y = b;
-	u64 x_xor_y = x ^ y;
-	u64 x_sub_y = x - y;
-	u64 x_sub_y_xor_y = x_sub_y ^ y;
-	u64 q = x_xor_y | x_sub_y_xor_y;
-	u64 x_xor_q = x ^ q;
-	u64 x_xor_q_ = x_xor_q >> (u32)63U;
-	return x_xor_q_ - (u64)1U;
-}
-
-/* Computes the addition of four-element f1 with value in f2
- * and returns the carry (if any) */
-static inline u64 add_scalar(u64 *out, const u64 *f1, u64 f2)
-{
-	u64 carry_r;
-
-	asm volatile(
-		/* Clear registers to propagate the carry bit */
-		"  xor %%r8d, %%r8d;"
-		"  xor %%r9d, %%r9d;"
-		"  xor %%r10d, %%r10d;"
-		"  xor %%r11d, %%r11d;"
-		"  xor %k1, %k1;"
-
-		/* Begin addition chain */
-		"  addq 0(%3), %0;"
-		"  movq %0, 0(%2);"
-		"  adcxq 8(%3), %%r8;"
-		"  movq %%r8, 8(%2);"
-		"  adcxq 16(%3), %%r9;"
-		"  movq %%r9, 16(%2);"
-		"  adcxq 24(%3), %%r10;"
-		"  movq %%r10, 24(%2);"
-
-		/* Return the carry bit in a register */
-		"  adcx %%r11, %1;"
-		: "+&r"(f2), "=&r"(carry_r)
-		: "r"(out), "r"(f1)
-		: "%r8", "%r9", "%r10", "%r11", "memory", "cc");
-
-	return carry_r;
-}
-
-/* Computes the field addition of two field elements */
-static inline void fadd(u64 *out, const u64 *f1, const u64 *f2)
-{
-	asm volatile(
-		/* Compute the raw addition of f1 + f2 */
-		"  movq 0(%0), %%r8;"
-		"  addq 0(%2), %%r8;"
-		"  movq 8(%0), %%r9;"
-		"  adcxq 8(%2), %%r9;"
-		"  movq 16(%0), %%r10;"
-		"  adcxq 16(%2), %%r10;"
-		"  movq 24(%0), %%r11;"
-		"  adcxq 24(%2), %%r11;"
-
-		/* Wrap the result back into the field */
-
-		/* Step 1: Compute carry*38 */
-		"  mov $0, %%rax;"
-		"  mov $38, %0;"
-		"  cmovc %0, %%rax;"
-
-		/* Step 2: Add carry*38 to the original sum */
-		"  xor %%ecx, %%ecx;"
-		"  add %%rax, %%r8;"
-		"  adcx %%rcx, %%r9;"
-		"  movq %%r9, 8(%1);"
-		"  adcx %%rcx, %%r10;"
-		"  movq %%r10, 16(%1);"
-		"  adcx %%rcx, %%r11;"
-		"  movq %%r11, 24(%1);"
-
-		/* Step 3: Fold the carry bit back in; guaranteed not to carry at this point */
-		"  mov $0, %%rax;"
-		"  cmovc %0, %%rax;"
-		"  add %%rax, %%r8;"
-		"  movq %%r8, 0(%1);"
-		: "+&r"(f2)
-		: "r"(out), "r"(f1)
-		: "%rax", "%rcx", "%r8", "%r9", "%r10", "%r11", "memory", "cc");
-}
-
-/* Computes the field subtraction of two field elements */
-static inline void fsub(u64 *out, const u64 *f1, const u64 *f2)
-{
-	asm volatile(
-		/* Compute the raw subtraction of f1-f2 */
-		"  movq 0(%1), %%r8;"
-		"  subq 0(%2), %%r8;"
-		"  movq 8(%1), %%r9;"
-		"  sbbq 8(%2), %%r9;"
-		"  movq 16(%1), %%r10;"
-		"  sbbq 16(%2), %%r10;"
-		"  movq 24(%1), %%r11;"
-		"  sbbq 24(%2), %%r11;"
-
-		/* Wrap the result back into the field */
-
-		/* Step 1: Compute carry*38 */
-		"  mov $0, %%rax;"
-		"  mov $38, %%rcx;"
-		"  cmovc %%rcx, %%rax;"
-
-		/* Step 2: Subtract carry*38 from the original difference */
-		"  sub %%rax, %%r8;"
-		"  sbb $0, %%r9;"
-		"  sbb $0, %%r10;"
-		"  sbb $0, %%r11;"
-
-		/* Step 3: Fold the carry bit back in; guaranteed not to carry at this point */
-		"  mov $0, %%rax;"
-		"  cmovc %%rcx, %%rax;"
-		"  sub %%rax, %%r8;"
-
-		/* Store the result */
-		"  movq %%r8, 0(%0);"
-		"  movq %%r9, 8(%0);"
-		"  movq %%r10, 16(%0);"
-		"  movq %%r11, 24(%0);"
-		:
-		: "r"(out), "r"(f1), "r"(f2)
-		: "%rax", "%rcx", "%r8", "%r9", "%r10", "%r11", "memory", "cc");
-}
-
-/* Computes a field multiplication: out <- f1 * f2
- * Uses the 8-element buffer tmp for intermediate results */
-static inline void fmul(u64 *out, const u64 *f1, const u64 *f2, u64 *tmp)
-{
-	asm volatile(
-
-		/* Compute the raw multiplication: tmp <- src1 * src2 */
-
-		/* Compute src1[0] * src2 */
-		"  movq 0(%0), %%rdx;"
-		"  mulxq 0(%1), %%r8, %%r9;"
-		"  xor %%r10d, %%r10d;"
-		"  movq %%r8, 0(%2);"
-		"  mulxq 8(%1), %%r10, %%r11;"
-		"  adox %%r9, %%r10;"
-		"  movq %%r10, 8(%2);"
-		"  mulxq 16(%1), %%rbx, %%r13;"
-		"  adox %%r11, %%rbx;"
-		"  mulxq 24(%1), %%r14, %%rdx;"
-		"  adox %%r13, %%r14;"
-		"  mov $0, %%rax;"
-		"  adox %%rdx, %%rax;"
-
-		/* Compute src1[1] * src2 */
-		"  movq 8(%0), %%rdx;"
-		"  mulxq 0(%1), %%r8, %%r9;"
-		"  xor %%r10d, %%r10d;"
-		"  adcxq 8(%2), %%r8;"
-		"  movq %%r8, 8(%2);"
-		"  mulxq 8(%1), %%r10, %%r11;"
-		"  adox %%r9, %%r10;"
-		"  adcx %%rbx, %%r10;"
-		"  movq %%r10, 16(%2);"
-		"  mulxq 16(%1), %%rbx, %%r13;"
-		"  adox %%r11, %%rbx;"
-		"  adcx %%r14, %%rbx;"
-		"  mov $0, %%r8;"
-		"  mulxq 24(%1), %%r14, %%rdx;"
-		"  adox %%r13, %%r14;"
-		"  adcx %%rax, %%r14;"
-		"  mov $0, %%rax;"
-		"  adox %%rdx, %%rax;"
-		"  adcx %%r8, %%rax;"
-
-		/* Compute src1[2] * src2 */
-		"  movq 16(%0), %%rdx;"
-		"  mulxq 0(%1), %%r8, %%r9;"
-		"  xor %%r10d, %%r10d;"
-		"  adcxq 16(%2), %%r8;"
-		"  movq %%r8, 16(%2);"
-		"  mulxq 8(%1), %%r10, %%r11;"
-		"  adox %%r9, %%r10;"
-		"  adcx %%rbx, %%r10;"
-		"  movq %%r10, 24(%2);"
-		"  mulxq 16(%1), %%rbx, %%r13;"
-		"  adox %%r11, %%rbx;"
-		"  adcx %%r14, %%rbx;"
-		"  mov $0, %%r8;"
-		"  mulxq 24(%1), %%r14, %%rdx;"
-		"  adox %%r13, %%r14;"
-		"  adcx %%rax, %%r14;"
-		"  mov $0, %%rax;"
-		"  adox %%rdx, %%rax;"
-		"  adcx %%r8, %%rax;"
-
-		/* Compute src1[3] * src2 */
-		"  movq 24(%0), %%rdx;"
-		"  mulxq 0(%1), %%r8, %%r9;"
-		"  xor %%r10d, %%r10d;"
-		"  adcxq 24(%2), %%r8;"
-		"  movq %%r8, 24(%2);"
-		"  mulxq 8(%1), %%r10, %%r11;"
-		"  adox %%r9, %%r10;"
-		"  adcx %%rbx, %%r10;"
-		"  movq %%r10, 32(%2);"
-		"  mulxq 16(%1), %%rbx, %%r13;"
-		"  adox %%r11, %%rbx;"
-		"  adcx %%r14, %%rbx;"
-		"  movq %%rbx, 40(%2);"
-		"  mov $0, %%r8;"
-		"  mulxq 24(%1), %%r14, %%rdx;"
-		"  adox %%r13, %%r14;"
-		"  adcx %%rax, %%r14;"
-		"  movq %%r14, 48(%2);"
-		"  mov $0, %%rax;"
-		"  adox %%rdx, %%rax;"
-		"  adcx %%r8, %%rax;"
-		"  movq %%rax, 56(%2);"
-
-		/* Line up pointers */
-		"  mov %2, %0;"
-		"  mov %3, %2;"
-
-		/* Wrap the result back into the field */
-
-		/* Step 1: Compute dst + carry == tmp_hi * 38 + tmp_lo */
-		"  mov $38, %%rdx;"
-		"  mulxq 32(%0), %%r8, %%r13;"
-		"  xor %k1, %k1;"
-		"  adoxq 0(%0), %%r8;"
-		"  mulxq 40(%0), %%r9, %%rbx;"
-		"  adcx %%r13, %%r9;"
-		"  adoxq 8(%0), %%r9;"
-		"  mulxq 48(%0), %%r10, %%r13;"
-		"  adcx %%rbx, %%r10;"
-		"  adoxq 16(%0), %%r10;"
-		"  mulxq 56(%0), %%r11, %%rax;"
-		"  adcx %%r13, %%r11;"
-		"  adoxq 24(%0), %%r11;"
-		"  adcx %1, %%rax;"
-		"  adox %1, %%rax;"
-		"  imul %%rdx, %%rax;"
-
-		/* Step 2: Fold the carry back into dst */
-		"  add %%rax, %%r8;"
-		"  adcx %1, %%r9;"
-		"  movq %%r9, 8(%2);"
-		"  adcx %1, %%r10;"
-		"  movq %%r10, 16(%2);"
-		"  adcx %1, %%r11;"
-		"  movq %%r11, 24(%2);"
-
-		/* Step 3: Fold the carry bit back in; guaranteed not to carry at this point */
-		"  mov $0, %%rax;"
-		"  cmovc %%rdx, %%rax;"
-		"  add %%rax, %%r8;"
-		"  movq %%r8, 0(%2);"
-		: "+&r"(f1), "+&r"(f2), "+&r"(tmp)
-		: "r"(out)
-		: "%rax", "%rbx", "%rdx", "%r8", "%r9", "%r10", "%r11", "%r13",
-		  "%r14", "memory", "cc");
-}
-
-/* Computes two field multiplications:
- *   out[0] <- f1[0] * f2[0]
- *   out[1] <- f1[1] * f2[1]
- * Uses the 16-element buffer tmp for intermediate results: */
-static inline void fmul2(u64 *out, const u64 *f1, const u64 *f2, u64 *tmp)
-{
-	asm volatile(
-
-		/* Compute the raw multiplication tmp[0] <- f1[0] * f2[0] */
-
-		/* Compute src1[0] * src2 */
-		"  movq 0(%0), %%rdx;"
-		"  mulxq 0(%1), %%r8, %%r9;"
-		"  xor %%r10d, %%r10d;"
-		"  movq %%r8, 0(%2);"
-		"  mulxq 8(%1), %%r10, %%r11;"
-		"  adox %%r9, %%r10;"
-		"  movq %%r10, 8(%2);"
-		"  mulxq 16(%1), %%rbx, %%r13;"
-		"  adox %%r11, %%rbx;"
-		"  mulxq 24(%1), %%r14, %%rdx;"
-		"  adox %%r13, %%r14;"
-		"  mov $0, %%rax;"
-		"  adox %%rdx, %%rax;"
-
-		/* Compute src1[1] * src2 */
-		"  movq 8(%0), %%rdx;"
-		"  mulxq 0(%1), %%r8, %%r9;"
-		"  xor %%r10d, %%r10d;"
-		"  adcxq 8(%2), %%r8;"
-		"  movq %%r8, 8(%2);"
-		"  mulxq 8(%1), %%r10, %%r11;"
-		"  adox %%r9, %%r10;"
-		"  adcx %%rbx, %%r10;"
-		"  movq %%r10, 16(%2);"
-		"  mulxq 16(%1), %%rbx, %%r13;"
-		"  adox %%r11, %%rbx;"
-		"  adcx %%r14, %%rbx;"
-		"  mov $0, %%r8;"
-		"  mulxq 24(%1), %%r14, %%rdx;"
-		"  adox %%r13, %%r14;"
-		"  adcx %%rax, %%r14;"
-		"  mov $0, %%rax;"
-		"  adox %%rdx, %%rax;"
-		"  adcx %%r8, %%rax;"
-
-		/* Compute src1[2] * src2 */
-		"  movq 16(%0), %%rdx;"
-		"  mulxq 0(%1), %%r8, %%r9;"
-		"  xor %%r10d, %%r10d;"
-		"  adcxq 16(%2), %%r8;"
-		"  movq %%r8, 16(%2);"
-		"  mulxq 8(%1), %%r10, %%r11;"
-		"  adox %%r9, %%r10;"
-		"  adcx %%rbx, %%r10;"
-		"  movq %%r10, 24(%2);"
-		"  mulxq 16(%1), %%rbx, %%r13;"
-		"  adox %%r11, %%rbx;"
-		"  adcx %%r14, %%rbx;"
-		"  mov $0, %%r8;"
-		"  mulxq 24(%1), %%r14, %%rdx;"
-		"  adox %%r13, %%r14;"
-		"  adcx %%rax, %%r14;"
-		"  mov $0, %%rax;"
-		"  adox %%rdx, %%rax;"
-		"  adcx %%r8, %%rax;"
-
-		/* Compute src1[3] * src2 */
-		"  movq 24(%0), %%rdx;"
-		"  mulxq 0(%1), %%r8, %%r9;"
-		"  xor %%r10d, %%r10d;"
-		"  adcxq 24(%2), %%r8;"
-		"  movq %%r8, 24(%2);"
-		"  mulxq 8(%1), %%r10, %%r11;"
-		"  adox %%r9, %%r10;"
-		"  adcx %%rbx, %%r10;"
-		"  movq %%r10, 32(%2);"
-		"  mulxq 16(%1), %%rbx, %%r13;"
-		"  adox %%r11, %%rbx;"
-		"  adcx %%r14, %%rbx;"
-		"  movq %%rbx, 40(%2);"
-		"  mov $0, %%r8;"
-		"  mulxq 24(%1), %%r14, %%rdx;"
-		"  adox %%r13, %%r14;"
-		"  adcx %%rax, %%r14;"
-		"  movq %%r14, 48(%2);"
-		"  mov $0, %%rax;"
-		"  adox %%rdx, %%rax;"
-		"  adcx %%r8, %%rax;"
-		"  movq %%rax, 56(%2);"
-
-		/* Compute the raw multiplication tmp[1] <- f1[1] * f2[1] */
-
-		/* Compute src1[0] * src2 */
-		"  movq 32(%0), %%rdx;"
-		"  mulxq 32(%1), %%r8, %%r9;"
-		"  xor %%r10d, %%r10d;"
-		"  movq %%r8, 64(%2);"
-		"  mulxq 40(%1), %%r10, %%r11;"
-		"  adox %%r9, %%r10;"
-		"  movq %%r10, 72(%2);"
-		"  mulxq 48(%1), %%rbx, %%r13;"
-		"  adox %%r11, %%rbx;"
-		"  mulxq 56(%1), %%r14, %%rdx;"
-		"  adox %%r13, %%r14;"
-		"  mov $0, %%rax;"
-		"  adox %%rdx, %%rax;"
-
-		/* Compute src1[1] * src2 */
-		"  movq 40(%0), %%rdx;"
-		"  mulxq 32(%1), %%r8, %%r9;"
-		"  xor %%r10d, %%r10d;"
-		"  adcxq 72(%2), %%r8;"
-		"  movq %%r8, 72(%2);"
-		"  mulxq 40(%1), %%r10, %%r11;"
-		"  adox %%r9, %%r10;"
-		"  adcx %%rbx, %%r10;"
-		"  movq %%r10, 80(%2);"
-		"  mulxq 48(%1), %%rbx, %%r13;"
-		"  adox %%r11, %%rbx;"
-		"  adcx %%r14, %%rbx;"
-		"  mov $0, %%r8;"
-		"  mulxq 56(%1), %%r14, %%rdx;"
-		"  adox %%r13, %%r14;"
-		"  adcx %%rax, %%r14;"
-		"  mov $0, %%rax;"
-		"  adox %%rdx, %%rax;"
-		"  adcx %%r8, %%rax;"
-
-		/* Compute src1[2] * src2 */
-		"  movq 48(%0), %%rdx;"
-		"  mulxq 32(%1), %%r8, %%r9;"
-		"  xor %%r10d, %%r10d;"
-		"  adcxq 80(%2), %%r8;"
-		"  movq %%r8, 80(%2);"
-		"  mulxq 40(%1), %%r10, %%r11;"
-		"  adox %%r9, %%r10;"
-		"  adcx %%rbx, %%r10;"
-		"  movq %%r10, 88(%2);"
-		"  mulxq 48(%1), %%rbx, %%r13;"
-		"  adox %%r11, %%rbx;"
-		"  adcx %%r14, %%rbx;"
-		"  mov $0, %%r8;"
-		"  mulxq 56(%1), %%r14, %%rdx;"
-		"  adox %%r13, %%r14;"
-		"  adcx %%rax, %%r14;"
-		"  mov $0, %%rax;"
-		"  adox %%rdx, %%rax;"
-		"  adcx %%r8, %%rax;"
-
-		/* Compute src1[3] * src2 */
-		"  movq 56(%0), %%rdx;"
-		"  mulxq 32(%1), %%r8, %%r9;"
-		"  xor %%r10d, %%r10d;"
-		"  adcxq 88(%2), %%r8;"
-		"  movq %%r8, 88(%2);"
-		"  mulxq 40(%1), %%r10, %%r11;"
-		"  adox %%r9, %%r10;"
-		"  adcx %%rbx, %%r10;"
-		"  movq %%r10, 96(%2);"
-		"  mulxq 48(%1), %%rbx, %%r13;"
-		"  adox %%r11, %%rbx;"
-		"  adcx %%r14, %%rbx;"
-		"  movq %%rbx, 104(%2);"
-		"  mov $0, %%r8;"
-		"  mulxq 56(%1), %%r14, %%rdx;"
-		"  adox %%r13, %%r14;"
-		"  adcx %%rax, %%r14;"
-		"  movq %%r14, 112(%2);"
-		"  mov $0, %%rax;"
-		"  adox %%rdx, %%rax;"
-		"  adcx %%r8, %%rax;"
-		"  movq %%rax, 120(%2);"
-
-		/* Line up pointers */
-		"  mov %2, %0;"
-		"  mov %3, %2;"
-
-		/* Wrap the results back into the field */
-
-		/* Step 1: Compute dst + carry == tmp_hi * 38 + tmp_lo */
-		"  mov $38, %%rdx;"
-		"  mulxq 32(%0), %%r8, %%r13;"
-		"  xor %k1, %k1;"
-		"  adoxq 0(%0), %%r8;"
-		"  mulxq 40(%0), %%r9, %%rbx;"
-		"  adcx %%r13, %%r9;"
-		"  adoxq 8(%0), %%r9;"
-		"  mulxq 48(%0), %%r10, %%r13;"
-		"  adcx %%rbx, %%r10;"
-		"  adoxq 16(%0), %%r10;"
-		"  mulxq 56(%0), %%r11, %%rax;"
-		"  adcx %%r13, %%r11;"
-		"  adoxq 24(%0), %%r11;"
-		"  adcx %1, %%rax;"
-		"  adox %1, %%rax;"
-		"  imul %%rdx, %%rax;"
-
-		/* Step 2: Fold the carry back into dst */
-		"  add %%rax, %%r8;"
-		"  adcx %1, %%r9;"
-		"  movq %%r9, 8(%2);"
-		"  adcx %1, %%r10;"
-		"  movq %%r10, 16(%2);"
-		"  adcx %1, %%r11;"
-		"  movq %%r11, 24(%2);"
-
-		/* Step 3: Fold the carry bit back in; guaranteed not to carry at this point */
-		"  mov $0, %%rax;"
-		"  cmovc %%rdx, %%rax;"
-		"  add %%rax, %%r8;"
-		"  movq %%r8, 0(%2);"
-
-		/* Step 1: Compute dst + carry == tmp_hi * 38 + tmp_lo */
-		"  mov $38, %%rdx;"
-		"  mulxq 96(%0), %%r8, %%r13;"
-		"  xor %k1, %k1;"
-		"  adoxq 64(%0), %%r8;"
-		"  mulxq 104(%0), %%r9, %%rbx;"
-		"  adcx %%r13, %%r9;"
-		"  adoxq 72(%0), %%r9;"
-		"  mulxq 112(%0), %%r10, %%r13;"
-		"  adcx %%rbx, %%r10;"
-		"  adoxq 80(%0), %%r10;"
-		"  mulxq 120(%0), %%r11, %%rax;"
-		"  adcx %%r13, %%r11;"
-		"  adoxq 88(%0), %%r11;"
-		"  adcx %1, %%rax;"
-		"  adox %1, %%rax;"
-		"  imul %%rdx, %%rax;"
-
-		/* Step 2: Fold the carry back into dst */
-		"  add %%rax, %%r8;"
-		"  adcx %1, %%r9;"
-		"  movq %%r9, 40(%2);"
-		"  adcx %1, %%r10;"
-		"  movq %%r10, 48(%2);"
-		"  adcx %1, %%r11;"
-		"  movq %%r11, 56(%2);"
-
-		/* Step 3: Fold the carry bit back in; guaranteed not to carry at this point */
-		"  mov $0, %%rax;"
-		"  cmovc %%rdx, %%rax;"
-		"  add %%rax, %%r8;"
-		"  movq %%r8, 32(%2);"
-		: "+&r"(f1), "+&r"(f2), "+&r"(tmp)
-		: "r"(out)
-		: "%rax", "%rbx", "%rdx", "%r8", "%r9", "%r10", "%r11", "%r13",
-		  "%r14", "memory", "cc");
-}
-
-/* Computes the field multiplication of four-element f1 with value in f2
- * Requires f2 to be smaller than 2^17 */
-static inline void fmul_scalar(u64 *out, const u64 *f1, u64 f2)
-{
-	register u64 f2_r asm("rdx") = f2;
-
-	asm volatile(
-		/* Compute the raw multiplication of f1*f2 */
-		"  mulxq 0(%2), %%r8, %%rcx;" /* f1[0]*f2 */
-		"  mulxq 8(%2), %%r9, %%rbx;" /* f1[1]*f2 */
-		"  add %%rcx, %%r9;"
-		"  mov $0, %%rcx;"
-		"  mulxq 16(%2), %%r10, %%r13;" /* f1[2]*f2 */
-		"  adcx %%rbx, %%r10;"
-		"  mulxq 24(%2), %%r11, %%rax;" /* f1[3]*f2 */
-		"  adcx %%r13, %%r11;"
-		"  adcx %%rcx, %%rax;"
-
-		/* Wrap the result back into the field */
-
-		/* Step 1: Compute carry*38 */
-		"  mov $38, %%rdx;"
-		"  imul %%rdx, %%rax;"
-
-		/* Step 2: Fold the carry back into dst */
-		"  add %%rax, %%r8;"
-		"  adcx %%rcx, %%r9;"
-		"  movq %%r9, 8(%1);"
-		"  adcx %%rcx, %%r10;"
-		"  movq %%r10, 16(%1);"
-		"  adcx %%rcx, %%r11;"
-		"  movq %%r11, 24(%1);"
-
-		/* Step 3: Fold the carry bit back in; guaranteed not to carry at this point */
-		"  mov $0, %%rax;"
-		"  cmovc %%rdx, %%rax;"
-		"  add %%rax, %%r8;"
-		"  movq %%r8, 0(%1);"
-		: "+&r"(f2_r)
-		: "r"(out), "r"(f1)
-		: "%rax", "%rbx", "%rcx", "%r8", "%r9", "%r10", "%r11", "%r13",
-		  "memory", "cc");
-}
-
-/* Computes p1 <- bit ? p2 : p1 in constant time */
-static inline void cswap2(u64 bit, const u64 *p1, const u64 *p2)
-{
-	asm volatile(
-		/* Transfer bit into CF flag */
-		"  add $18446744073709551615, %0;"
-
-		/* cswap p1[0], p2[0] */
-		"  movq 0(%1), %%r8;"
-		"  movq 0(%2), %%r9;"
-		"  mov %%r8, %%r10;"
-		"  cmovc %%r9, %%r8;"
-		"  cmovc %%r10, %%r9;"
-		"  movq %%r8, 0(%1);"
-		"  movq %%r9, 0(%2);"
-
-		/* cswap p1[1], p2[1] */
-		"  movq 8(%1), %%r8;"
-		"  movq 8(%2), %%r9;"
-		"  mov %%r8, %%r10;"
-		"  cmovc %%r9, %%r8;"
-		"  cmovc %%r10, %%r9;"
-		"  movq %%r8, 8(%1);"
-		"  movq %%r9, 8(%2);"
-
-		/* cswap p1[2], p2[2] */
-		"  movq 16(%1), %%r8;"
-		"  movq 16(%2), %%r9;"
-		"  mov %%r8, %%r10;"
-		"  cmovc %%r9, %%r8;"
-		"  cmovc %%r10, %%r9;"
-		"  movq %%r8, 16(%1);"
-		"  movq %%r9, 16(%2);"
-
-		/* cswap p1[3], p2[3] */
-		"  movq 24(%1), %%r8;"
-		"  movq 24(%2), %%r9;"
-		"  mov %%r8, %%r10;"
-		"  cmovc %%r9, %%r8;"
-		"  cmovc %%r10, %%r9;"
-		"  movq %%r8, 24(%1);"
-		"  movq %%r9, 24(%2);"
-
-		/* cswap p1[4], p2[4] */
-		"  movq 32(%1), %%r8;"
-		"  movq 32(%2), %%r9;"
-		"  mov %%r8, %%r10;"
-		"  cmovc %%r9, %%r8;"
-		"  cmovc %%r10, %%r9;"
-		"  movq %%r8, 32(%1);"
-		"  movq %%r9, 32(%2);"
-
-		/* cswap p1[5], p2[5] */
-		"  movq 40(%1), %%r8;"
-		"  movq 40(%2), %%r9;"
-		"  mov %%r8, %%r10;"
-		"  cmovc %%r9, %%r8;"
-		"  cmovc %%r10, %%r9;"
-		"  movq %%r8, 40(%1);"
-		"  movq %%r9, 40(%2);"
-
-		/* cswap p1[6], p2[6] */
-		"  movq 48(%1), %%r8;"
-		"  movq 48(%2), %%r9;"
-		"  mov %%r8, %%r10;"
-		"  cmovc %%r9, %%r8;"
-		"  cmovc %%r10, %%r9;"
-		"  movq %%r8, 48(%1);"
-		"  movq %%r9, 48(%2);"
-
-		/* cswap p1[7], p2[7] */
-		"  movq 56(%1), %%r8;"
-		"  movq 56(%2), %%r9;"
-		"  mov %%r8, %%r10;"
-		"  cmovc %%r9, %%r8;"
-		"  cmovc %%r10, %%r9;"
-		"  movq %%r8, 56(%1);"
-		"  movq %%r9, 56(%2);"
-		: "+&r"(bit)
-		: "r"(p1), "r"(p2)
-		: "%r8", "%r9", "%r10", "memory", "cc");
-}
-
-/* Computes the square of a field element: out <- f * f
- * Uses the 8-element buffer tmp for intermediate results */
-static inline void fsqr(u64 *out, const u64 *f, u64 *tmp)
-{
-	asm volatile(
-		/* Compute the raw multiplication: tmp <- f * f */
-
-		/* Step 1: Compute all partial products */
-		"  movq 0(%0), %%rdx;" /* f[0] */
-		"  mulxq 8(%0), %%r8, %%r14;"
-		"  xor %%r15d, %%r15d;" /* f[1]*f[0] */
-		"  mulxq 16(%0), %%r9, %%r10;"
-		"  adcx %%r14, %%r9;" /* f[2]*f[0] */
-		"  mulxq 24(%0), %%rax, %%rcx;"
-		"  adcx %%rax, %%r10;" /* f[3]*f[0] */
-		"  movq 24(%0), %%rdx;" /* f[3] */
-		"  mulxq 8(%0), %%r11, %%rbx;"
-		"  adcx %%rcx, %%r11;" /* f[1]*f[3] */
-		"  mulxq 16(%0), %%rax, %%r13;"
-		"  adcx %%rax, %%rbx;" /* f[2]*f[3] */
-		"  movq 8(%0), %%rdx;"
-		"  adcx %%r15, %%r13;" /* f1 */
-		"  mulxq 16(%0), %%rax, %%rcx;"
-		"  mov $0, %%r14;" /* f[2]*f[1] */
-
-		/* Step 2: Compute two parallel carry chains */
-		"  xor %%r15d, %%r15d;"
-		"  adox %%rax, %%r10;"
-		"  adcx %%r8, %%r8;"
-		"  adox %%rcx, %%r11;"
-		"  adcx %%r9, %%r9;"
-		"  adox %%r15, %%rbx;"
-		"  adcx %%r10, %%r10;"
-		"  adox %%r15, %%r13;"
-		"  adcx %%r11, %%r11;"
-		"  adox %%r15, %%r14;"
-		"  adcx %%rbx, %%rbx;"
-		"  adcx %%r13, %%r13;"
-		"  adcx %%r14, %%r14;"
-
-		/* Step 3: Compute intermediate squares */
-		"  movq 0(%0), %%rdx;"
-		"  mulx %%rdx, %%rax, %%rcx;" /* f[0]^2 */
-		"  movq %%rax, 0(%1);"
-		"  add %%rcx, %%r8;"
-		"  movq %%r8, 8(%1);"
-		"  movq 8(%0), %%rdx;"
-		"  mulx %%rdx, %%rax, %%rcx;" /* f[1]^2 */
-		"  adcx %%rax, %%r9;"
-		"  movq %%r9, 16(%1);"
-		"  adcx %%rcx, %%r10;"
-		"  movq %%r10, 24(%1);"
-		"  movq 16(%0), %%rdx;"
-		"  mulx %%rdx, %%rax, %%rcx;" /* f[2]^2 */
-		"  adcx %%rax, %%r11;"
-		"  movq %%r11, 32(%1);"
-		"  adcx %%rcx, %%rbx;"
-		"  movq %%rbx, 40(%1);"
-		"  movq 24(%0), %%rdx;"
-		"  mulx %%rdx, %%rax, %%rcx;" /* f[3]^2 */
-		"  adcx %%rax, %%r13;"
-		"  movq %%r13, 48(%1);"
-		"  adcx %%rcx, %%r14;"
-		"  movq %%r14, 56(%1);"
-
-		/* Line up pointers */
-		"  mov %1, %0;"
-		"  mov %2, %1;"
-
-		/* Wrap the result back into the field */
-
-		/* Step 1: Compute dst + carry == tmp_hi * 38 + tmp_lo */
-		"  mov $38, %%rdx;"
-		"  mulxq 32(%0), %%r8, %%r13;"
-		"  xor %%ecx, %%ecx;"
-		"  adoxq 0(%0), %%r8;"
-		"  mulxq 40(%0), %%r9, %%rbx;"
-		"  adcx %%r13, %%r9;"
-		"  adoxq 8(%0), %%r9;"
-		"  mulxq 48(%0), %%r10, %%r13;"
-		"  adcx %%rbx, %%r10;"
-		"  adoxq 16(%0), %%r10;"
-		"  mulxq 56(%0), %%r11, %%rax;"
-		"  adcx %%r13, %%r11;"
-		"  adoxq 24(%0), %%r11;"
-		"  adcx %%rcx, %%rax;"
-		"  adox %%rcx, %%rax;"
-		"  imul %%rdx, %%rax;"
-
-		/* Step 2: Fold the carry back into dst */
-		"  add %%rax, %%r8;"
-		"  adcx %%rcx, %%r9;"
-		"  movq %%r9, 8(%1);"
-		"  adcx %%rcx, %%r10;"
-		"  movq %%r10, 16(%1);"
-		"  adcx %%rcx, %%r11;"
-		"  movq %%r11, 24(%1);"
-
-		/* Step 3: Fold the carry bit back in; guaranteed not to carry at this point */
-		"  mov $0, %%rax;"
-		"  cmovc %%rdx, %%rax;"
-		"  add %%rax, %%r8;"
-		"  movq %%r8, 0(%1);"
-		: "+&r"(f), "+&r"(tmp)
-		: "r"(out)
-		: "%rax", "%rbx", "%rcx", "%rdx", "%r8", "%r9", "%r10", "%r11",
-		  "%r13", "%r14", "%r15", "memory", "cc");
-}
-
-/* Computes two field squarings:
- *   out[0] <- f[0] * f[0]
- *   out[1] <- f[1] * f[1]
- * Uses the 16-element buffer tmp for intermediate results */
-static inline void fsqr2(u64 *out, const u64 *f, u64 *tmp)
-{
-	asm volatile(
-		/* Step 1: Compute all partial products */
-		"  movq 0(%0), %%rdx;" /* f[0] */
-		"  mulxq 8(%0), %%r8, %%r14;"
-		"  xor %%r15d, %%r15d;" /* f[1]*f[0] */
-		"  mulxq 16(%0), %%r9, %%r10;"
-		"  adcx %%r14, %%r9;" /* f[2]*f[0] */
-		"  mulxq 24(%0), %%rax, %%rcx;"
-		"  adcx %%rax, %%r10;" /* f[3]*f[0] */
-		"  movq 24(%0), %%rdx;" /* f[3] */
-		"  mulxq 8(%0), %%r11, %%rbx;"
-		"  adcx %%rcx, %%r11;" /* f[1]*f[3] */
-		"  mulxq 16(%0), %%rax, %%r13;"
-		"  adcx %%rax, %%rbx;" /* f[2]*f[3] */
-		"  movq 8(%0), %%rdx;"
-		"  adcx %%r15, %%r13;" /* f1 */
-		"  mulxq 16(%0), %%rax, %%rcx;"
-		"  mov $0, %%r14;" /* f[2]*f[1] */
-
-		/* Step 2: Compute two parallel carry chains */
-		"  xor %%r15d, %%r15d;"
-		"  adox %%rax, %%r10;"
-		"  adcx %%r8, %%r8;"
-		"  adox %%rcx, %%r11;"
-		"  adcx %%r9, %%r9;"
-		"  adox %%r15, %%rbx;"
-		"  adcx %%r10, %%r10;"
-		"  adox %%r15, %%r13;"
-		"  adcx %%r11, %%r11;"
-		"  adox %%r15, %%r14;"
-		"  adcx %%rbx, %%rbx;"
-		"  adcx %%r13, %%r13;"
-		"  adcx %%r14, %%r14;"
-
-		/* Step 3: Compute intermediate squares */
-		"  movq 0(%0), %%rdx;"
-		"  mulx %%rdx, %%rax, %%rcx;" /* f[0]^2 */
-		"  movq %%rax, 0(%1);"
-		"  add %%rcx, %%r8;"
-		"  movq %%r8, 8(%1);"
-		"  movq 8(%0), %%rdx;"
-		"  mulx %%rdx, %%rax, %%rcx;" /* f[1]^2 */
-		"  adcx %%rax, %%r9;"
-		"  movq %%r9, 16(%1);"
-		"  adcx %%rcx, %%r10;"
-		"  movq %%r10, 24(%1);"
-		"  movq 16(%0), %%rdx;"
-		"  mulx %%rdx, %%rax, %%rcx;" /* f[2]^2 */
-		"  adcx %%rax, %%r11;"
-		"  movq %%r11, 32(%1);"
-		"  adcx %%rcx, %%rbx;"
-		"  movq %%rbx, 40(%1);"
-		"  movq 24(%0), %%rdx;"
-		"  mulx %%rdx, %%rax, %%rcx;" /* f[3]^2 */
-		"  adcx %%rax, %%r13;"
-		"  movq %%r13, 48(%1);"
-		"  adcx %%rcx, %%r14;"
-		"  movq %%r14, 56(%1);"
-
-		/* Step 1: Compute all partial products */
-		"  movq 32(%0), %%rdx;" /* f[0] */
-		"  mulxq 40(%0), %%r8, %%r14;"
-		"  xor %%r15d, %%r15d;" /* f[1]*f[0] */
-		"  mulxq 48(%0), %%r9, %%r10;"
-		"  adcx %%r14, %%r9;" /* f[2]*f[0] */
-		"  mulxq 56(%0), %%rax, %%rcx;"
-		"  adcx %%rax, %%r10;" /* f[3]*f[0] */
-		"  movq 56(%0), %%rdx;" /* f[3] */
-		"  mulxq 40(%0), %%r11, %%rbx;"
-		"  adcx %%rcx, %%r11;" /* f[1]*f[3] */
-		"  mulxq 48(%0), %%rax, %%r13;"
-		"  adcx %%rax, %%rbx;" /* f[2]*f[3] */
-		"  movq 40(%0), %%rdx;"
-		"  adcx %%r15, %%r13;" /* f1 */
-		"  mulxq 48(%0), %%rax, %%rcx;"
-		"  mov $0, %%r14;" /* f[2]*f[1] */
-
-		/* Step 2: Compute two parallel carry chains */
-		"  xor %%r15d, %%r15d;"
-		"  adox %%rax, %%r10;"
-		"  adcx %%r8, %%r8;"
-		"  adox %%rcx, %%r11;"
-		"  adcx %%r9, %%r9;"
-		"  adox %%r15, %%rbx;"
-		"  adcx %%r10, %%r10;"
-		"  adox %%r15, %%r13;"
-		"  adcx %%r11, %%r11;"
-		"  adox %%r15, %%r14;"
-		"  adcx %%rbx, %%rbx;"
-		"  adcx %%r13, %%r13;"
-		"  adcx %%r14, %%r14;"
-
-		/* Step 3: Compute intermediate squares */
-		"  movq 32(%0), %%rdx;"
-		"  mulx %%rdx, %%rax, %%rcx;" /* f[0]^2 */
-		"  movq %%rax, 64(%1);"
-		"  add %%rcx, %%r8;"
-		"  movq %%r8, 72(%1);"
-		"  movq 40(%0), %%rdx;"
-		"  mulx %%rdx, %%rax, %%rcx;" /* f[1]^2 */
-		"  adcx %%rax, %%r9;"
-		"  movq %%r9, 80(%1);"
-		"  adcx %%rcx, %%r10;"
-		"  movq %%r10, 88(%1);"
-		"  movq 48(%0), %%rdx;"
-		"  mulx %%rdx, %%rax, %%rcx;" /* f[2]^2 */
-		"  adcx %%rax, %%r11;"
-		"  movq %%r11, 96(%1);"
-		"  adcx %%rcx, %%rbx;"
-		"  movq %%rbx, 104(%1);"
-		"  movq 56(%0), %%rdx;"
-		"  mulx %%rdx, %%rax, %%rcx;" /* f[3]^2 */
-		"  adcx %%rax, %%r13;"
-		"  movq %%r13, 112(%1);"
-		"  adcx %%rcx, %%r14;"
-		"  movq %%r14, 120(%1);"
-
-		/* Line up pointers */
-		"  mov %1, %0;"
-		"  mov %2, %1;"
-
-		/* Step 1: Compute dst + carry == tmp_hi * 38 + tmp_lo */
-		"  mov $38, %%rdx;"
-		"  mulxq 32(%0), %%r8, %%r13;"
-		"  xor %%ecx, %%ecx;"
-		"  adoxq 0(%0), %%r8;"
-		"  mulxq 40(%0), %%r9, %%rbx;"
-		"  adcx %%r13, %%r9;"
-		"  adoxq 8(%0), %%r9;"
-		"  mulxq 48(%0), %%r10, %%r13;"
-		"  adcx %%rbx, %%r10;"
-		"  adoxq 16(%0), %%r10;"
-		"  mulxq 56(%0), %%r11, %%rax;"
-		"  adcx %%r13, %%r11;"
-		"  adoxq 24(%0), %%r11;"
-		"  adcx %%rcx, %%rax;"
-		"  adox %%rcx, %%rax;"
-		"  imul %%rdx, %%rax;"
-
-		/* Step 2: Fold the carry back into dst */
-		"  add %%rax, %%r8;"
-		"  adcx %%rcx, %%r9;"
-		"  movq %%r9, 8(%1);"
-		"  adcx %%rcx, %%r10;"
-		"  movq %%r10, 16(%1);"
-		"  adcx %%rcx, %%r11;"
-		"  movq %%r11, 24(%1);"
-
-		/* Step 3: Fold the carry bit back in; guaranteed not to carry at this point */
-		"  mov $0, %%rax;"
-		"  cmovc %%rdx, %%rax;"
-		"  add %%rax, %%r8;"
-		"  movq %%r8, 0(%1);"
-
-		/* Step 1: Compute dst + carry == tmp_hi * 38 + tmp_lo */
-		"  mov $38, %%rdx;"
-		"  mulxq 96(%0), %%r8, %%r13;"
-		"  xor %%ecx, %%ecx;"
-		"  adoxq 64(%0), %%r8;"
-		"  mulxq 104(%0), %%r9, %%rbx;"
-		"  adcx %%r13, %%r9;"
-		"  adoxq 72(%0), %%r9;"
-		"  mulxq 112(%0), %%r10, %%r13;"
-		"  adcx %%rbx, %%r10;"
-		"  adoxq 80(%0), %%r10;"
-		"  mulxq 120(%0), %%r11, %%rax;"
-		"  adcx %%r13, %%r11;"
-		"  adoxq 88(%0), %%r11;"
-		"  adcx %%rcx, %%rax;"
-		"  adox %%rcx, %%rax;"
-		"  imul %%rdx, %%rax;"
-
-		/* Step 2: Fold the carry back into dst */
-		"  add %%rax, %%r8;"
-		"  adcx %%rcx, %%r9;"
-		"  movq %%r9, 40(%1);"
-		"  adcx %%rcx, %%r10;"
-		"  movq %%r10, 48(%1);"
-		"  adcx %%rcx, %%r11;"
-		"  movq %%r11, 56(%1);"
-
-		/* Step 3: Fold the carry bit back in; guaranteed not to carry at this point */
-		"  mov $0, %%rax;"
-		"  cmovc %%rdx, %%rax;"
-		"  add %%rax, %%r8;"
-		"  movq %%r8, 32(%1);"
-		: "+&r"(f), "+&r"(tmp)
-		: "r"(out)
-		: "%rax", "%rbx", "%rcx", "%rdx", "%r8", "%r9", "%r10", "%r11",
-		  "%r13", "%r14", "%r15", "memory", "cc");
-}
-
-static void point_add_and_double(u64 *q, u64 *p01_tmp1, u64 *tmp2)
-{
-	u64 *nq = p01_tmp1;
-	u64 *nq_p1 = p01_tmp1 + (u32)8U;
-	u64 *tmp1 = p01_tmp1 + (u32)16U;
-	u64 *x1 = q;
-	u64 *x2 = nq;
-	u64 *z2 = nq + (u32)4U;
-	u64 *z3 = nq_p1 + (u32)4U;
-	u64 *a = tmp1;
-	u64 *b = tmp1 + (u32)4U;
-	u64 *ab = tmp1;
-	u64 *dc = tmp1 + (u32)8U;
-	u64 *x3;
-	u64 *z31;
-	u64 *d0;
-	u64 *c0;
-	u64 *a1;
-	u64 *b1;
-	u64 *d;
-	u64 *c;
-	u64 *ab1;
-	u64 *dc1;
-	fadd(a, x2, z2);
-	fsub(b, x2, z2);
-	x3 = nq_p1;
-	z31 = nq_p1 + (u32)4U;
-	d0 = dc;
-	c0 = dc + (u32)4U;
-	fadd(c0, x3, z31);
-	fsub(d0, x3, z31);
-	fmul2(dc, dc, ab, tmp2);
-	fadd(x3, d0, c0);
-	fsub(z31, d0, c0);
-	a1 = tmp1;
-	b1 = tmp1 + (u32)4U;
-	d = tmp1 + (u32)8U;
-	c = tmp1 + (u32)12U;
-	ab1 = tmp1;
-	dc1 = tmp1 + (u32)8U;
-	fsqr2(dc1, ab1, tmp2);
-	fsqr2(nq_p1, nq_p1, tmp2);
-	a1[0U] = c[0U];
-	a1[1U] = c[1U];
-	a1[2U] = c[2U];
-	a1[3U] = c[3U];
-	fsub(c, d, c);
-	fmul_scalar(b1, c, (u64)121665U);
-	fadd(b1, b1, d);
-	fmul2(nq, dc1, ab1, tmp2);
-	fmul(z3, z3, x1, tmp2);
-}
-
-static void point_double(u64 *nq, u64 *tmp1, u64 *tmp2)
-{
-	u64 *x2 = nq;
-	u64 *z2 = nq + (u32)4U;
-	u64 *a = tmp1;
-	u64 *b = tmp1 + (u32)4U;
-	u64 *d = tmp1 + (u32)8U;
-	u64 *c = tmp1 + (u32)12U;
-	u64 *ab = tmp1;
-	u64 *dc = tmp1 + (u32)8U;
-	fadd(a, x2, z2);
-	fsub(b, x2, z2);
-	fsqr2(dc, ab, tmp2);
-	a[0U] = c[0U];
-	a[1U] = c[1U];
-	a[2U] = c[2U];
-	a[3U] = c[3U];
-	fsub(c, d, c);
-	fmul_scalar(b, c, (u64)121665U);
-	fadd(b, b, d);
-	fmul2(nq, dc, ab, tmp2);
-}
-
-static void montgomery_ladder(u64 *out, const u8 *key, u64 *init1)
-{
-	u64 tmp2[16U] = { 0U };
-	u64 p01_tmp1_swap[33U] = { 0U };
-	u64 *p0 = p01_tmp1_swap;
-	u64 *p01 = p01_tmp1_swap;
-	u64 *p03 = p01;
-	u64 *p11 = p01 + (u32)8U;
-	u64 *x0;
-	u64 *z0;
-	u64 *p01_tmp1;
-	u64 *p01_tmp11;
-	u64 *nq10;
-	u64 *nq_p11;
-	u64 *swap1;
-	u64 sw0;
-	u64 *nq1;
-	u64 *tmp1;
-	memcpy(p11, init1, (u32)8U * sizeof(init1[0U]));
-	x0 = p03;
-	z0 = p03 + (u32)4U;
-	x0[0U] = (u64)1U;
-	x0[1U] = (u64)0U;
-	x0[2U] = (u64)0U;
-	x0[3U] = (u64)0U;
-	z0[0U] = (u64)0U;
-	z0[1U] = (u64)0U;
-	z0[2U] = (u64)0U;
-	z0[3U] = (u64)0U;
-	p01_tmp1 = p01_tmp1_swap;
-	p01_tmp11 = p01_tmp1_swap;
-	nq10 = p01_tmp1_swap;
-	nq_p11 = p01_tmp1_swap + (u32)8U;
-	swap1 = p01_tmp1_swap + (u32)32U;
-	cswap2((u64)1U, nq10, nq_p11);
-	point_add_and_double(init1, p01_tmp11, tmp2);
-	swap1[0U] = (u64)1U;
-	{
-		u32 i;
-		for (i = (u32)0U; i < (u32)251U; i = i + (u32)1U) {
-			u64 *p01_tmp12 = p01_tmp1_swap;
-			u64 *swap2 = p01_tmp1_swap + (u32)32U;
-			u64 *nq2 = p01_tmp12;
-			u64 *nq_p12 = p01_tmp12 + (u32)8U;
-			u64 bit = (u64)(key[((u32)253U - i) / (u32)8U] >> ((u32)253U - i) % (u32)8U & (u8)1U);
-			u64 sw = swap2[0U] ^ bit;
-			cswap2(sw, nq2, nq_p12);
-			point_add_and_double(init1, p01_tmp12, tmp2);
-			swap2[0U] = bit;
-		}
-	}
-	sw0 = swap1[0U];
-	cswap2(sw0, nq10, nq_p11);
-	nq1 = p01_tmp1;
-	tmp1 = p01_tmp1 + (u32)16U;
-	point_double(nq1, tmp1, tmp2);
-	point_double(nq1, tmp1, tmp2);
-	point_double(nq1, tmp1, tmp2);
-	memcpy(out, p0, (u32)8U * sizeof(p0[0U]));
-
-	memzero_explicit(tmp2, sizeof(tmp2));
-	memzero_explicit(p01_tmp1_swap, sizeof(p01_tmp1_swap));
-}
-
-static void fsquare_times(u64 *o, const u64 *inp, u64 *tmp, u32 n1)
-{
-	u32 i;
-	fsqr(o, inp, tmp);
-	for (i = (u32)0U; i < n1 - (u32)1U; i = i + (u32)1U)
-		fsqr(o, o, tmp);
-}
-
-static void finv(u64 *o, const u64 *i, u64 *tmp)
-{
-	u64 t1[16U] = { 0U };
-	u64 *a0 = t1;
-	u64 *b = t1 + (u32)4U;
-	u64 *c = t1 + (u32)8U;
-	u64 *t00 = t1 + (u32)12U;
-	u64 *tmp1 = tmp;
-	u64 *a;
-	u64 *t0;
-	fsquare_times(a0, i, tmp1, (u32)1U);
-	fsquare_times(t00, a0, tmp1, (u32)2U);
-	fmul(b, t00, i, tmp);
-	fmul(a0, b, a0, tmp);
-	fsquare_times(t00, a0, tmp1, (u32)1U);
-	fmul(b, t00, b, tmp);
-	fsquare_times(t00, b, tmp1, (u32)5U);
-	fmul(b, t00, b, tmp);
-	fsquare_times(t00, b, tmp1, (u32)10U);
-	fmul(c, t00, b, tmp);
-	fsquare_times(t00, c, tmp1, (u32)20U);
-	fmul(t00, t00, c, tmp);
-	fsquare_times(t00, t00, tmp1, (u32)10U);
-	fmul(b, t00, b, tmp);
-	fsquare_times(t00, b, tmp1, (u32)50U);
-	fmul(c, t00, b, tmp);
-	fsquare_times(t00, c, tmp1, (u32)100U);
-	fmul(t00, t00, c, tmp);
-	fsquare_times(t00, t00, tmp1, (u32)50U);
-	fmul(t00, t00, b, tmp);
-	fsquare_times(t00, t00, tmp1, (u32)5U);
-	a = t1;
-	t0 = t1 + (u32)12U;
-	fmul(o, t0, a, tmp);
-}
-
-static void store_felem(u64 *b, u64 *f)
-{
-	u64 f30 = f[3U];
-	u64 top_bit0 = f30 >> (u32)63U;
-	u64 f31;
-	u64 top_bit;
-	u64 f0;
-	u64 f1;
-	u64 f2;
-	u64 f3;
-	u64 m0;
-	u64 m1;
-	u64 m2;
-	u64 m3;
-	u64 mask;
-	u64 f0_;
-	u64 f1_;
-	u64 f2_;
-	u64 f3_;
-	u64 o0;
-	u64 o1;
-	u64 o2;
-	u64 o3;
-	f[3U] = f30 & (u64)0x7fffffffffffffffU;
-	add_scalar(f, f, (u64)19U * top_bit0);
-	f31 = f[3U];
-	top_bit = f31 >> (u32)63U;
-	f[3U] = f31 & (u64)0x7fffffffffffffffU;
-	add_scalar(f, f, (u64)19U * top_bit);
-	f0 = f[0U];
-	f1 = f[1U];
-	f2 = f[2U];
-	f3 = f[3U];
-	m0 = gte_mask(f0, (u64)0xffffffffffffffedU);
-	m1 = eq_mask(f1, (u64)0xffffffffffffffffU);
-	m2 = eq_mask(f2, (u64)0xffffffffffffffffU);
-	m3 = eq_mask(f3, (u64)0x7fffffffffffffffU);
-	mask = ((m0 & m1) & m2) & m3;
-	f0_ = f0 - (mask & (u64)0xffffffffffffffedU);
-	f1_ = f1 - (mask & (u64)0xffffffffffffffffU);
-	f2_ = f2 - (mask & (u64)0xffffffffffffffffU);
-	f3_ = f3 - (mask & (u64)0x7fffffffffffffffU);
-	o0 = f0_;
-	o1 = f1_;
-	o2 = f2_;
-	o3 = f3_;
-	b[0U] = o0;
-	b[1U] = o1;
-	b[2U] = o2;
-	b[3U] = o3;
-}
-
-static void encode_point(u8 *o, const u64 *i)
-{
-	const u64 *x = i;
-	const u64 *z = i + (u32)4U;
-	u64 tmp[4U] = { 0U };
-	u64 tmp_w[16U] = { 0U };
-	finv(tmp, z, tmp_w);
-	fmul(tmp, tmp, x, tmp_w);
-	store_felem((u64 *)o, tmp);
-}
-
-static void curve25519_ever64(u8 *out, const u8 *priv, const u8 *pub)
-{
-	u64 init1[8U] = { 0U };
-	u64 tmp[4U] = { 0U };
-	u64 tmp3;
-	u64 *x;
-	u64 *z;
-	{
-		u32 i;
-		for (i = (u32)0U; i < (u32)4U; i = i + (u32)1U) {
-			u64 *os = tmp;
-			const u8 *bj = pub + i * (u32)8U;
-			u64 u = *(u64 *)bj;
-			u64 r = u;
-			u64 x0 = r;
-			os[i] = x0;
-		}
-	}
-	tmp3 = tmp[3U];
-	tmp[3U] = tmp3 & (u64)0x7fffffffffffffffU;
-	x = init1;
-	z = init1 + (u32)4U;
-	z[0U] = (u64)1U;
-	z[1U] = (u64)0U;
-	z[2U] = (u64)0U;
-	z[3U] = (u64)0U;
-	x[0U] = tmp[0U];
-	x[1U] = tmp[1U];
-	x[2U] = tmp[2U];
-	x[3U] = tmp[3U];
-	montgomery_ladder(init1, priv, init1);
-	encode_point(out, init1);
-}
-
-/* The below constants were generated using this sage script:
- *
- * #!/usr/bin/env sage
- * import sys
- * from sage.all import *
- * def limbs(n):
- * 	n = int(n)
- * 	l = ((n >> 0) % 2^64, (n >> 64) % 2^64, (n >> 128) % 2^64, (n >> 192) % 2^64)
- * 	return "0x%016xULL, 0x%016xULL, 0x%016xULL, 0x%016xULL" % l
- * ec = EllipticCurve(GF(2^255 - 19), [0, 486662, 0, 1, 0])
- * p_minus_s = (ec.lift_x(9) - ec.lift_x(1))[0]
- * print("static const u64 p_minus_s[] = { %s };\n" % limbs(p_minus_s))
- * print("static const u64 table_ladder[] = {")
- * p = ec.lift_x(9)
- * for i in range(252):
- * 	l = (p[0] + p[2]) / (p[0] - p[2])
- * 	print(("\t%s" + ("," if i != 251 else "")) % limbs(l))
- * 	p = p * 2
- * print("};")
- *
- */
-
-static const u64 p_minus_s[] = { 0x816b1e0137d48290ULL, 0x440f6a51eb4d1207ULL, 0x52385f46dca2b71dULL, 0x215132111d8354cbULL };
-
-static const u64 table_ladder[] = {
-	0xfffffffffffffff3ULL, 0xffffffffffffffffULL, 0xffffffffffffffffULL, 0x5fffffffffffffffULL,
-	0x6b8220f416aafe96ULL, 0x82ebeb2b4f566a34ULL, 0xd5a9a5b075a5950fULL, 0x5142b2cf4b2488f4ULL,
-	0x6aaebc750069680cULL, 0x89cf7820a0f99c41ULL, 0x2a58d9183b56d0f4ULL, 0x4b5aca80e36011a4ULL,
-	0x329132348c29745dULL, 0xf4a2e616e1642fd7ULL, 0x1e45bb03ff67bc34ULL, 0x306912d0f42a9b4aULL,
-	0xff886507e6af7154ULL, 0x04f50e13dfeec82fULL, 0xaa512fe82abab5ceULL, 0x174e251a68d5f222ULL,
-	0xcf96700d82028898ULL, 0x1743e3370a2c02c5ULL, 0x379eec98b4e86eaaULL, 0x0c59888a51e0482eULL,
-	0xfbcbf1d699b5d189ULL, 0xacaef0d58e9fdc84ULL, 0xc1c20d06231f7614ULL, 0x2938218da274f972ULL,
-	0xf6af49beff1d7f18ULL, 0xcc541c22387ac9c2ULL, 0x96fcc9ef4015c56bULL, 0x69c1627c690913a9ULL,
-	0x7a86fd2f4733db0eULL, 0xfdb8c4f29e087de9ULL, 0x095e4b1a8ea2a229ULL, 0x1ad7a7c829b37a79ULL,
-	0x342d89cad17ea0c0ULL, 0x67bedda6cced2051ULL, 0x19ca31bf2bb42f74ULL, 0x3df7b4c84980acbbULL,
-	0xa8c6444dc80ad883ULL, 0xb91e440366e3ab85ULL, 0xc215cda00164f6d8ULL, 0x3d867c6ef247e668ULL,
-	0xc7dd582bcc3e658cULL, 0xfd2c4748ee0e5528ULL, 0xa0fd9b95cc9f4f71ULL, 0x7529d871b0675ddfULL,
-	0xb8f568b42d3cbd78ULL, 0x1233011b91f3da82ULL, 0x2dce6ccd4a7c3b62ULL, 0x75e7fc8e9e498603ULL,
-	0x2f4f13f1fcd0b6ecULL, 0xf1a8ca1f29ff7a45ULL, 0xc249c1a72981e29bULL, 0x6ebe0dbb8c83b56aULL,
-	0x7114fa8d170bb222ULL, 0x65a2dcd5bf93935fULL, 0xbdc41f68b59c979aULL, 0x2f0eef79a2ce9289ULL,
-	0x42ecbf0c083c37ceULL, 0x2930bc09ec496322ULL, 0xf294b0c19cfeac0dULL, 0x3780aa4bedfabb80ULL,
-	0x56c17d3e7cead929ULL, 0xe7cb4beb2e5722c5ULL, 0x0ce931732dbfe15aULL, 0x41b883c7621052f8ULL,
-	0xdbf75ca0c3d25350ULL, 0x2936be086eb1e351ULL, 0xc936e03cb4a9b212ULL, 0x1d45bf82322225aaULL,
-	0xe81ab1036a024cc5ULL, 0xe212201c304c9a72ULL, 0xc5d73fba6832b1fcULL, 0x20ffdb5a4d839581ULL,
-	0xa283d367be5d0fadULL, 0x6c2b25ca8b164475ULL, 0x9d4935467caaf22eULL, 0x5166408eee85ff49ULL,
-	0x3c67baa2fab4e361ULL, 0xb3e433c67ef35cefULL, 0x5259729241159b1cULL, 0x6a621892d5b0ab33ULL,
-	0x20b74a387555cdcbULL, 0x532aa10e1208923fULL, 0xeaa17b7762281dd1ULL, 0x61ab3443f05c44bfULL,
-	0x257a6c422324def8ULL, 0x131c6c1017e3cf7fULL, 0x23758739f630a257ULL, 0x295a407a01a78580ULL,
-	0xf8c443246d5da8d9ULL, 0x19d775450c52fa5dULL, 0x2afcfc92731bf83dULL, 0x7d10c8e81b2b4700ULL,
-	0xc8e0271f70baa20bULL, 0x993748867ca63957ULL, 0x5412efb3cb7ed4bbULL, 0x3196d36173e62975ULL,
-	0xde5bcad141c7dffcULL, 0x47cc8cd2b395c848ULL, 0xa34cd942e11af3cbULL, 0x0256dbf2d04ecec2ULL,
-	0x875ab7e94b0e667fULL, 0xcad4dd83c0850d10ULL, 0x47f12e8f4e72c79fULL, 0x5f1a87bb8c85b19bULL,
-	0x7ae9d0b6437f51b8ULL, 0x12c7ce5518879065ULL, 0x2ade09fe5cf77aeeULL, 0x23a05a2f7d2c5627ULL,
-	0x5908e128f17c169aULL, 0xf77498dd8ad0852dULL, 0x74b4c4ceab102f64ULL, 0x183abadd10139845ULL,
-	0xb165ba8daa92aaacULL, 0xd5c5ef9599386705ULL, 0xbe2f8f0cf8fc40d1ULL, 0x2701e635ee204514ULL,
-	0x629fa80020156514ULL, 0xf223868764a8c1ceULL, 0x5b894fff0b3f060eULL, 0x60d9944cf708a3faULL,
-	0xaeea001a1c7a201fULL, 0xebf16a633ee2ce63ULL, 0x6f7709594c7a07e1ULL, 0x79b958150d0208cbULL,
-	0x24b55e5301d410e7ULL, 0xe3a34edff3fdc84dULL, 0xd88768e4904032d8ULL, 0x131384427b3aaeecULL,
-	0x8405e51286234f14ULL, 0x14dc4739adb4c529ULL, 0xb8a2b5b250634ffdULL, 0x2fe2a94ad8a7ff93ULL,
-	0xec5c57efe843faddULL, 0x2843ce40f0bb9918ULL, 0xa4b561d6cf3d6305ULL, 0x743629bde8fb777eULL,
-	0x343edd46bbaf738fULL, 0xed981828b101a651ULL, 0xa401760b882c797aULL, 0x1fc223e28dc88730ULL,
-	0x48604e91fc0fba0eULL, 0xb637f78f052c6fa4ULL, 0x91ccac3d09e9239cULL, 0x23f7eed4437a687cULL,
-	0x5173b1118d9bd800ULL, 0x29d641b63189d4a7ULL, 0xfdbf177988bbc586ULL, 0x2959894fcad81df5ULL,
-	0xaebc8ef3b4bbc899ULL, 0x4148995ab26992b9ULL, 0x24e20b0134f92cfbULL, 0x40d158894a05dee8ULL,
-	0x46b00b1185af76f6ULL, 0x26bac77873187a79ULL, 0x3dc0bf95ab8fff5fULL, 0x2a608bd8945524d7ULL,
-	0x26449588bd446302ULL, 0x7c4bc21c0388439cULL, 0x8e98a4f383bd11b2ULL, 0x26218d7bc9d876b9ULL,
-	0xe3081542997c178aULL, 0x3c2d29a86fb6606fULL, 0x5c217736fa279374ULL, 0x7dde05734afeb1faULL,
-	0x3bf10e3906d42babULL, 0xe4f7803e1980649cULL, 0xe6053bf89595bf7aULL, 0x394faf38da245530ULL,
-	0x7a8efb58896928f4ULL, 0xfbc778e9cc6a113cULL, 0x72670ce330af596fULL, 0x48f222a81d3d6cf7ULL,
-	0xf01fce410d72caa7ULL, 0x5a20ecc7213b5595ULL, 0x7bc21165c1fa1483ULL, 0x07f89ae31da8a741ULL,
-	0x05d2c2b4c6830ff9ULL, 0xd43e330fc6316293ULL, 0xa5a5590a96d3a904ULL, 0x705edb91a65333b6ULL,
-	0x048ee15e0bb9a5f7ULL, 0x3240cfca9e0aaf5dULL, 0x8f4b71ceedc4a40bULL, 0x621c0da3de544a6dULL,
-	0x92872836a08c4091ULL, 0xce8375b010c91445ULL, 0x8a72eb524f276394ULL, 0x2667fcfa7ec83635ULL,
-	0x7f4c173345e8752aULL, 0x061b47feee7079a5ULL, 0x25dd9afa9f86ff34ULL, 0x3780cef5425dc89cULL,
-	0x1a46035a513bb4e9ULL, 0x3e1ef379ac575adaULL, 0xc78c5f1c5fa24b50ULL, 0x321a967634fd9f22ULL,
-	0x946707b8826e27faULL, 0x3dca84d64c506fd0ULL, 0xc189218075e91436ULL, 0x6d9284169b3b8484ULL,
-	0x3a67e840383f2ddfULL, 0x33eec9a30c4f9b75ULL, 0x3ec7c86fa783ef47ULL, 0x26ec449fbac9fbc4ULL,
-	0x5c0f38cba09b9e7dULL, 0x81168cc762a3478cULL, 0x3e23b0d306fc121cULL, 0x5a238aa0a5efdcddULL,
-	0x1ba26121c4ea43ffULL, 0x36f8c77f7c8832b5ULL, 0x88fbea0b0adcf99aULL, 0x5ca9938ec25bebf9ULL,
-	0xd5436a5e51fccda0ULL, 0x1dbc4797c2cd893bULL, 0x19346a65d3224a08ULL, 0x0f5034e49b9af466ULL,
-	0xf23c3967a1e0b96eULL, 0xe58b08fa867a4d88ULL, 0xfb2fabc6a7341679ULL, 0x2a75381eb6026946ULL,
-	0xc80a3be4c19420acULL, 0x66b1f6c681f2b6dcULL, 0x7cf7036761e93388ULL, 0x25abbbd8a660a4c4ULL,
-	0x91ea12ba14fd5198ULL, 0x684950fc4a3cffa9ULL, 0xf826842130f5ad28ULL, 0x3ea988f75301a441ULL,
-	0xc978109a695f8c6fULL, 0x1746eb4a0530c3f3ULL, 0x444d6d77b4459995ULL, 0x75952b8c054e5cc7ULL,
-	0xa3703f7915f4d6aaULL, 0x66c346202f2647d8ULL, 0xd01469df811d644bULL, 0x77fea47d81a5d71fULL,
-	0xc5e9529ef57ca381ULL, 0x6eeeb4b9ce2f881aULL, 0xb6e91a28e8009bd6ULL, 0x4b80be3e9afc3fecULL,
-	0x7e3773c526aed2c5ULL, 0x1b4afcb453c9a49dULL, 0xa920bdd7baffb24dULL, 0x7c54699f122d400eULL,
-	0xef46c8e14fa94bc8ULL, 0xe0b074ce2952ed5eULL, 0xbea450e1dbd885d5ULL, 0x61b68649320f712cULL,
-	0x8a485f7309ccbdd1ULL, 0xbd06320d7d4d1a2dULL, 0x25232973322dbef4ULL, 0x445dc4758c17f770ULL,
-	0xdb0434177cc8933cULL, 0xed6fe82175ea059fULL, 0x1efebefdc053db34ULL, 0x4adbe867c65daf99ULL,
-	0x3acd71a2a90609dfULL, 0xe5e991856dd04050ULL, 0x1ec69b688157c23cULL, 0x697427f6885cfe4dULL,
-	0xd7be7b9b65e1a851ULL, 0xa03d28d522c536ddULL, 0x28399d658fd2b645ULL, 0x49e5b7e17c2641e1ULL,
-	0x6f8c3a98700457a4ULL, 0x5078f0a25ebb6778ULL, 0xd13c3ccbc382960fULL, 0x2e003258a7df84b1ULL,
-	0x8ad1f39be6296a1cULL, 0xc1eeaa652a5fbfb2ULL, 0x33ee0673fd26f3cbULL, 0x59256173a69d2cccULL,
-	0x41ea07aa4e18fc41ULL, 0xd9fc19527c87a51eULL, 0xbdaacb805831ca6fULL, 0x445b652dc916694fULL,
-	0xce92a3a7f2172315ULL, 0x1edc282de11b9964ULL, 0xa1823aafe04c314aULL, 0x790a2d94437cf586ULL,
-	0x71c447fb93f6e009ULL, 0x8922a56722845276ULL, 0xbf70903b204f5169ULL, 0x2f7a89891ba319feULL,
-	0x02a08eb577e2140cULL, 0xed9a4ed4427bdcf4ULL, 0x5253ec44e4323cd1ULL, 0x3e88363c14e9355bULL,
-	0xaa66c14277110b8cULL, 0x1ae0391610a23390ULL, 0x2030bd12c93fc2a2ULL, 0x3ee141579555c7abULL,
-	0x9214de3a6d6e7d41ULL, 0x3ccdd88607f17efeULL, 0x674f1288f8e11217ULL, 0x5682250f329f93d0ULL,
-	0x6cf00b136d2e396eULL, 0x6e4cf86f1014debfULL, 0x5930b1b5bfcc4e83ULL, 0x047069b48aba16b6ULL,
-	0x0d4ce4ab69b20793ULL, 0xb24db91a97d0fb9eULL, 0xcdfa50f54e00d01dULL, 0x221b1085368bddb5ULL,
-	0xe7e59468b1e3d8d2ULL, 0x53c56563bd122f93ULL, 0xeee8a903e0663f09ULL, 0x61efa662cbbe3d42ULL,
-	0x2cf8ddddde6eab2aULL, 0x9bf80ad51435f231ULL, 0x5deadacec9f04973ULL, 0x29275b5d41d29b27ULL,
-	0xcfde0f0895ebf14fULL, 0xb9aab96b054905a7ULL, 0xcae80dd9a1c420fdULL, 0x0a63bf2f1673bbc7ULL,
-	0x092f6e11958fbc8cULL, 0x672a81e804822fadULL, 0xcac8351560d52517ULL, 0x6f3f7722c8f192f8ULL,
-	0xf8ba90ccc2e894b7ULL, 0x2c7557a438ff9f0dULL, 0x894d1d855ae52359ULL, 0x68e122157b743d69ULL,
-	0xd87e5570cfb919f3ULL, 0x3f2cdecd95798db9ULL, 0x2121154710c0a2ceULL, 0x3c66a115246dc5b2ULL,
-	0xcbedc562294ecb72ULL, 0xba7143c36a280b16ULL, 0x9610c2efd4078b67ULL, 0x6144735d946a4b1eULL,
-	0x536f111ed75b3350ULL, 0x0211db8c2041d81bULL, 0xf93cb1000e10413cULL, 0x149dfd3c039e8876ULL,
-	0xd479dde46b63155bULL, 0xb66e15e93c837976ULL, 0xdafde43b1f13e038ULL, 0x5fafda1a2e4b0b35ULL,
-	0x3600bbdf17197581ULL, 0x3972050bbe3cd2c2ULL, 0x5938906dbdd5be86ULL, 0x34fce5e43f9b860fULL,
-	0x75a8a4cd42d14d02ULL, 0x828dabc53441df65ULL, 0x33dcabedd2e131d3ULL, 0x3ebad76fb814d25fULL,
-	0xd4906f566f70e10fULL, 0x5d12f7aa51690f5aULL, 0x45adb16e76cefcf2ULL, 0x01f768aead232999ULL,
-	0x2b6cc77b6248febdULL, 0x3cd30628ec3aaffdULL, 0xce1c0b80d4ef486aULL, 0x4c3bff2ea6f66c23ULL,
-	0x3f2ec4094aeaeb5fULL, 0x61b19b286e372ca7ULL, 0x5eefa966de2a701dULL, 0x23b20565de55e3efULL,
-	0xe301ca5279d58557ULL, 0x07b2d4ce27c2874fULL, 0xa532cd8a9dcf1d67ULL, 0x2a52fee23f2bff56ULL,
-	0x8624efb37cd8663dULL, 0xbbc7ac20ffbd7594ULL, 0x57b85e9c82d37445ULL, 0x7b3052cb86a6ec66ULL,
-	0x3482f0ad2525e91eULL, 0x2cb68043d28edca0ULL, 0xaf4f6d052e1b003aULL, 0x185f8c2529781b0aULL,
-	0xaa41de5bd80ce0d6ULL, 0x9407b2416853e9d6ULL, 0x563ec36e357f4c3aULL, 0x4cc4b8dd0e297bceULL,
-	0xa2fc1a52ffb8730eULL, 0x1811f16e67058e37ULL, 0x10f9a366cddf4ee1ULL, 0x72f4a0c4a0b9f099ULL,
-	0x8c16c06f663f4ea7ULL, 0x693b3af74e970fbaULL, 0x2102e7f1d69ec345ULL, 0x0ba53cbc968a8089ULL,
-	0xca3d9dc7fea15537ULL, 0x4c6824bb51536493ULL, 0xb9886314844006b1ULL, 0x40d2a72ab454cc60ULL,
-	0x5936a1b712570975ULL, 0x91b9d648debda657ULL, 0x3344094bb64330eaULL, 0x006ba10d12ee51d0ULL,
-	0x19228468f5de5d58ULL, 0x0eb12f4c38cc05b0ULL, 0xa1039f9dd5601990ULL, 0x4502d4ce4fff0e0bULL,
-	0xeb2054106837c189ULL, 0xd0f6544c6dd3b93cULL, 0x40727064c416d74fULL, 0x6e15c6114b502ef0ULL,
-	0x4df2a398cfb1a76bULL, 0x11256c7419f2f6b1ULL, 0x4a497962066e6043ULL, 0x705b3aab41355b44ULL,
-	0x365ef536d797b1d8ULL, 0x00076bd622ddf0dbULL, 0x3bbf33b0e0575a88ULL, 0x3777aa05c8e4ca4dULL,
-	0x392745c85578db5fULL, 0x6fda4149dbae5ae2ULL, 0xb1f0b00b8adc9867ULL, 0x09963437d36f1da3ULL,
-	0x7e824e90a5dc3853ULL, 0xccb5f6641f135cbdULL, 0x6736d86c87ce8fccULL, 0x625f3ce26604249fULL,
-	0xaf8ac8059502f63fULL, 0x0c05e70a2e351469ULL, 0x35292e9c764b6305ULL, 0x1a394360c7e23ac3ULL,
-	0xd5c6d53251183264ULL, 0x62065abd43c2b74fULL, 0xb5fbf5d03b973f9bULL, 0x13a3da3661206e5eULL,
-	0xc6bd5837725d94e5ULL, 0x18e30912205016c5ULL, 0x2088ce1570033c68ULL, 0x7fba1f495c837987ULL,
-	0x5a8c7423f2f9079dULL, 0x1735157b34023fc5ULL, 0xe4f9b49ad2fab351ULL, 0x6691ff72c878e33cULL,
-	0x122c2adedc5eff3eULL, 0xf8dd4bf1d8956cf4ULL, 0xeb86205d9e9e5bdaULL, 0x049b92b9d975c743ULL,
-	0xa5379730b0f6c05aULL, 0x72a0ffacc6f3a553ULL, 0xb0032c34b20dcd6dULL, 0x470e9dbc88d5164aULL,
-	0xb19cf10ca237c047ULL, 0xb65466711f6c81a2ULL, 0xb3321bd16dd80b43ULL, 0x48c14f600c5fbe8eULL,
-	0x66451c264aa6c803ULL, 0xb66e3904a4fa7da6ULL, 0xd45f19b0b3128395ULL, 0x31602627c3c9bc10ULL,
-	0x3120dc4832e4e10dULL, 0xeb20c46756c717f7ULL, 0x00f52e3f67280294ULL, 0x566d4fc14730c509ULL,
-	0x7e3a5d40fd837206ULL, 0xc1e926dc7159547aULL, 0x216730fba68d6095ULL, 0x22e8c3843f69cea7ULL,
-	0x33d074e8930e4b2bULL, 0xb6e4350e84d15816ULL, 0x5534c26ad6ba2365ULL, 0x7773c12f89f1f3f3ULL,
-	0x8cba404da57962aaULL, 0x5b9897a81999ce56ULL, 0x508e862f121692fcULL, 0x3a81907fa093c291ULL,
-	0x0dded0ff4725a510ULL, 0x10d8cc10673fc503ULL, 0x5b9d151c9f1f4e89ULL, 0x32a5c1d5cb09a44cULL,
-	0x1e0aa442b90541fbULL, 0x5f85eb7cc1b485dbULL, 0xbee595ce8a9df2e5ULL, 0x25e496c722422236ULL,
-	0x5edf3c46cd0fe5b9ULL, 0x34e75a7ed2a43388ULL, 0xe488de11d761e352ULL, 0x0e878a01a085545cULL,
-	0xba493c77e021bb04ULL, 0x2b4d1843c7df899aULL, 0x9ea37a487ae80d67ULL, 0x67a9958011e41794ULL,
-	0x4b58051a6697b065ULL, 0x47e33f7d8d6ba6d4ULL, 0xbb4da8d483ca46c1ULL, 0x68becaa181c2db0dULL,
-	0x8d8980e90b989aa5ULL, 0xf95eb14a2c93c99bULL, 0x51c6c7c4796e73a2ULL, 0x6e228363b5efb569ULL,
-	0xc6bbc0b02dd624c8ULL, 0x777eb47dec8170eeULL, 0x3cde15a004cfafa9ULL, 0x1dc6bc087160bf9bULL,
-	0x2e07e043eec34002ULL, 0x18e9fc677a68dc7fULL, 0xd8da03188bd15b9aULL, 0x48fbc3bb00568253ULL,
-	0x57547d4cfb654ce1ULL, 0xd3565b82a058e2adULL, 0xf63eaf0bbf154478ULL, 0x47531ef114dfbb18ULL,
-	0xe1ec630a4278c587ULL, 0x5507d546ca8e83f3ULL, 0x85e135c63adc0c2bULL, 0x0aa7efa85682844eULL,
-	0x72691ba8b3e1f615ULL, 0x32b4e9701fbe3ffaULL, 0x97b6d92e39bb7868ULL, 0x2cfe53dea02e39e8ULL,
-	0x687392cd85cd52b0ULL, 0x27ff66c910e29831ULL, 0x97134556a9832d06ULL, 0x269bb0360a84f8a0ULL,
-	0x706e55457643f85cULL, 0x3734a48c9b597d1bULL, 0x7aee91e8c6efa472ULL, 0x5cd6abc198a9d9e0ULL,
-	0x0e04de06cb3ce41aULL, 0xd8c6eb893402e138ULL, 0x904659bb686e3772ULL, 0x7215c371746ba8c8ULL,
-	0xfd12a97eeae4a2d9ULL, 0x9514b7516394f2c5ULL, 0x266fd5809208f294ULL, 0x5c847085619a26b9ULL,
-	0x52985410fed694eaULL, 0x3c905b934a2ed254ULL, 0x10bb47692d3be467ULL, 0x063b3d2d69e5e9e1ULL,
-	0x472726eedda57debULL, 0xefb6c4ae10f41891ULL, 0x2b1641917b307614ULL, 0x117c554fc4f45b7cULL,
-	0xc07cf3118f9d8812ULL, 0x01dbd82050017939ULL, 0xd7e803f4171b2827ULL, 0x1015e87487d225eaULL,
-	0xc58de3fed23acc4dULL, 0x50db91c294a7be2dULL, 0x0b94d43d1c9cf457ULL, 0x6b1640fa6e37524aULL,
-	0x692f346c5fda0d09ULL, 0x200b1c59fa4d3151ULL, 0xb8c46f760777a296ULL, 0x4b38395f3ffdfbcfULL,
-	0x18d25e00be54d671ULL, 0x60d50582bec8aba6ULL, 0x87ad8f263b78b982ULL, 0x50fdf64e9cda0432ULL,
-	0x90f567aac578dcf0ULL, 0xef1e9b0ef2a3133bULL, 0x0eebba9242d9de71ULL, 0x15473c9bf03101c7ULL,
-	0x7c77e8ae56b78095ULL, 0xb678e7666e6f078eULL, 0x2da0b9615348ba1fULL, 0x7cf931c1ff733f0bULL,
-	0x26b357f50a0a366cULL, 0xe9708cf42b87d732ULL, 0xc13aeea5f91cb2c0ULL, 0x35d90c991143bb4cULL,
-	0x47c1c404a9a0d9dcULL, 0x659e58451972d251ULL, 0x3875a8c473b38c31ULL, 0x1fbd9ed379561f24ULL,
-	0x11fabc6fd41ec28dULL, 0x7ef8dfe3cd2a2dcaULL, 0x72e73b5d8c404595ULL, 0x6135fa4954b72f27ULL,
-	0xccfc32a2de24b69cULL, 0x3f55698c1f095d88ULL, 0xbe3350ed5ac3f929ULL, 0x5e9bf806ca477eebULL,
-	0xe9ce8fb63c309f68ULL, 0x5376f63565e1f9f4ULL, 0xd1afcfb35a6393f1ULL, 0x6632a1ede5623506ULL,
-	0x0b7d6c390c2ded4cULL, 0x56cb3281df04cb1fULL, 0x66305a1249ecc3c7ULL, 0x5d588b60a38ca72aULL,
-	0xa6ecbf78e8e5f42dULL, 0x86eeb44b3c8a3eecULL, 0xec219c48fbd21604ULL, 0x1aaf1af517c36731ULL,
-	0xc306a2836769bde7ULL, 0x208280622b1e2adbULL, 0x8027f51ffbff94a6ULL, 0x76cfa1ce1124f26bULL,
-	0x18eb00562422abb6ULL, 0xf377c4d58f8c29c3ULL, 0x4dbbc207f531561aULL, 0x0253b7f082128a27ULL,
-	0x3d1f091cb62c17e0ULL, 0x4860e1abd64628a9ULL, 0x52d17436309d4253ULL, 0x356f97e13efae576ULL,
-	0xd351e11aa150535bULL, 0x3e6b45bb1dd878ccULL, 0x0c776128bed92c98ULL, 0x1d34ae93032885b8ULL,
-	0x4ba0488ca85ba4c3ULL, 0x985348c33c9ce6ceULL, 0x66124c6f97bda770ULL, 0x0f81a0290654124aULL,
-	0x9ed09ca6569b86fdULL, 0x811009fd18af9a2dULL, 0xff08d03f93d8c20aULL, 0x52a148199faef26bULL,
-	0x3e03f9dc2d8d1b73ULL, 0x4205801873961a70ULL, 0xc0d987f041a35970ULL, 0x07aa1f15a1c0d549ULL,
-	0xdfd46ce08cd27224ULL, 0x6d0a024f934e4239ULL, 0x808a7a6399897b59ULL, 0x0a4556e9e13d95a2ULL,
-	0xd21a991fe9c13045ULL, 0x9b0e8548fe7751b8ULL, 0x5da643cb4bf30035ULL, 0x77db28d63940f721ULL,
-	0xfc5eeb614adc9011ULL, 0x5229419ae8c411ebULL, 0x9ec3e7787d1dcf74ULL, 0x340d053e216e4cb5ULL,
-	0xcac7af39b48df2b4ULL, 0xc0faec2871a10a94ULL, 0x140a69245ca575edULL, 0x0cf1c37134273a4cULL,
-	0xc8ee306ac224b8a5ULL, 0x57eaee7ccb4930b0ULL, 0xa1e806bdaacbe74fULL, 0x7d9a62742eeb657dULL,
-	0x9eb6b6ef546c4830ULL, 0x885cca1fddb36e2eULL, 0xe6b9f383ef0d7105ULL, 0x58654fef9d2e0412ULL,
-	0xa905c4ffbe0e8e26ULL, 0x942de5df9b31816eULL, 0x497d723f802e88e1ULL, 0x30684dea602f408dULL,
-	0x21e5a278a3e6cb34ULL, 0xaefb6e6f5b151dc4ULL, 0xb30b8e049d77ca15ULL, 0x28c3c9cf53b98981ULL,
-	0x287fb721556cdd2aULL, 0x0d317ca897022274ULL, 0x7468c7423a543258ULL, 0x4a7f11464eb5642fULL,
-	0xa237a4774d193aa6ULL, 0xd865986ea92129a1ULL, 0x24c515ecf87c1a88ULL, 0x604003575f39f5ebULL,
-	0x47b9f189570a9b27ULL, 0x2b98cede465e4b78ULL, 0x026df551dbb85c20ULL, 0x74fcd91047e21901ULL,
-	0x13e2a90a23c1bfa3ULL, 0x0cb0074e478519f6ULL, 0x5ff1cbbe3af6cf44ULL, 0x67fe5438be812dbeULL,
-	0xd13cf64fa40f05b0ULL, 0x054dfb2f32283787ULL, 0x4173915b7f0d2aeaULL, 0x482f144f1f610d4eULL,
-	0xf6210201b47f8234ULL, 0x5d0ae1929e70b990ULL, 0xdcd7f455b049567cULL, 0x7e93d0f1f0916f01ULL,
-	0xdd79cbf18a7db4faULL, 0xbe8391bf6f74c62fULL, 0x027145d14b8291bdULL, 0x585a73ea2cbf1705ULL,
-	0x485ca03e928a0db2ULL, 0x10fc01a5742857e7ULL, 0x2f482edbd6d551a7ULL, 0x0f0433b5048fdb8aULL,
-	0x60da2e8dd7dc6247ULL, 0x88b4c9d38cd4819aULL, 0x13033ac001f66697ULL, 0x273b24fe3b367d75ULL,
-	0xc6e8f66a31b3b9d4ULL, 0x281514a494df49d5ULL, 0xd1726fdfc8b23da7ULL, 0x4b3ae7d103dee548ULL,
-	0xc6256e19ce4b9d7eULL, 0xff5c5cf186e3c61cULL, 0xacc63ca34b8ec145ULL, 0x74621888fee66574ULL,
-	0x956f409645290a1eULL, 0xef0bf8e3263a962eULL, 0xed6a50eb5ec2647bULL, 0x0694283a9dca7502ULL,
-	0x769b963643a2dcd1ULL, 0x42b7c8ea09fc5353ULL, 0x4f002aee13397eabULL, 0x63005e2c19b7d63aULL,
-	0xca6736da63023beaULL, 0x966c7f6db12a99b7ULL, 0xace09390c537c5e1ULL, 0x0b696063a1aa89eeULL,
-	0xebb03e97288c56e5ULL, 0x432a9f9f938c8be8ULL, 0xa6a5a93d5b717f71ULL, 0x1a5fb4c3e18f9d97ULL,
-	0x1c94e7ad1c60cdceULL, 0xee202a43fc02c4a0ULL, 0x8dafe4d867c46a20ULL, 0x0a10263c8ac27b58ULL,
-	0xd0dea9dfe4432a4aULL, 0x856af87bbe9277c5ULL, 0xce8472acc212c71aULL, 0x6f151b6d9bbb1e91ULL,
-	0x26776c527ceed56aULL, 0x7d211cb7fbf8faecULL, 0x37ae66a6fd4609ccULL, 0x1f81b702d2770c42ULL,
-	0x2fb0b057eac58392ULL, 0xe1dd89fe29744e9dULL, 0xc964f8eb17beb4f8ULL, 0x29571073c9a2d41eULL,
-	0xa948a18981c0e254ULL, 0x2df6369b65b22830ULL, 0xa33eb2d75fcfd3c6ULL, 0x078cd6ec4199a01fULL,
-	0x4a584a41ad900d2fULL, 0x32142b78e2c74c52ULL, 0x68c4e8338431c978ULL, 0x7f69ea9008689fc2ULL,
-	0x52f2c81e46a38265ULL, 0xfd78072d04a832fdULL, 0x8cd7d5fa25359e94ULL, 0x4de71b7454cc29d2ULL,
-	0x42eb60ad1eda6ac9ULL, 0x0aad37dfdbc09c3aULL, 0x81004b71e33cc191ULL, 0x44e6be345122803cULL,
-	0x03fe8388ba1920dbULL, 0xf5d57c32150db008ULL, 0x49c8c4281af60c29ULL, 0x21edb518de701aeeULL,
-	0x7fb63e418f06dc99ULL, 0xa4460d99c166d7b8ULL, 0x24dd5248ce520a83ULL, 0x5ec3ad712b928358ULL,
-	0x15022a5fbd17930fULL, 0xa4f64a77d82570e3ULL, 0x12bc8d6915783712ULL, 0x498194c0fc620abbULL,
-	0x38a2d9d255686c82ULL, 0x785c6bd9193e21f0ULL, 0xe4d5c81ab24a5484ULL, 0x56307860b2e20989ULL,
-	0x429d55f78b4d74c4ULL, 0x22f1834643350131ULL, 0x1e60c24598c71fffULL, 0x59f2f014979983efULL,
-	0x46a47d56eb494a44ULL, 0x3e22a854d636a18eULL, 0xb346e15274491c3bULL, 0x2ceafd4e5390cde7ULL,
-	0xba8a8538be0d6675ULL, 0x4b9074bb50818e23ULL, 0xcbdab89085d304c3ULL, 0x61a24fe0e56192c4ULL,
-	0xcb7615e6db525bcbULL, 0xdd7d8c35a567e4caULL, 0xe6b4153acafcdd69ULL, 0x2d668e097f3c9766ULL,
-	0xa57e7e265ce55ef0ULL, 0x5d9f4e527cd4b967ULL, 0xfbc83606492fd1e5ULL, 0x090d52beb7c3f7aeULL,
-	0x09b9515a1e7b4d7cULL, 0x1f266a2599da44c0ULL, 0xa1c49548e2c55504ULL, 0x7ef04287126f15ccULL,
-	0xfed1659dbd30ef15ULL, 0x8b4ab9eec4e0277bULL, 0x884d6236a5df3291ULL, 0x1fd96ea6bf5cf788ULL,
-	0x42a161981f190d9aULL, 0x61d849507e6052c1ULL, 0x9fe113bf285a2cd5ULL, 0x7c22d676dbad85d8ULL,
-	0x82e770ed2bfbd27dULL, 0x4c05b2ece996f5a5ULL, 0xcd40a9c2b0900150ULL, 0x5895319213d9bf64ULL,
-	0xe7cc5d703fea2e08ULL, 0xb50c491258e2188cULL, 0xcce30baa48205bf0ULL, 0x537c659ccfa32d62ULL,
-	0x37b6623a98cfc088ULL, 0xfe9bed1fa4d6aca4ULL, 0x04d29b8e56a8d1b0ULL, 0x725f71c40b519575ULL,
-	0x28c7f89cd0339ce6ULL, 0x8367b14469ddc18bULL, 0x883ada83a6a1652cULL, 0x585f1974034d6c17ULL,
-	0x89cfb266f1b19188ULL, 0xe63b4863e7c35217ULL, 0xd88c9da6b4c0526aULL, 0x3e035c9df0954635ULL,
-	0xdd9d5412fb45de9dULL, 0xdd684532e4cff40dULL, 0x4b5c999b151d671cULL, 0x2d8c2cc811e7f690ULL,
-	0x7f54be1d90055d40ULL, 0xa464c5df464aaf40ULL, 0x33979624f0e917beULL, 0x2c018dc527356b30ULL,
-	0xa5415024e330b3d4ULL, 0x73ff3d96691652d3ULL, 0x94ec42c4ef9b59f1ULL, 0x0747201618d08e5aULL,
-	0x4d6ca48aca411c53ULL, 0x66415f2fcfa66119ULL, 0x9c4dd40051e227ffULL, 0x59810bc09a02f7ebULL,
-	0x2a7eb171b3dc101dULL, 0x441c5ab99ffef68eULL, 0x32025c9b93b359eaULL, 0x5e8ce0a71e9d112fULL,
-	0xbfcccb92429503fdULL, 0xd271ba752f095d55ULL, 0x345ead5e972d091eULL, 0x18c8df11a83103baULL,
-	0x90cd949a9aed0f4cULL, 0xc5d1f4cb6660e37eULL, 0xb8cac52d56c52e0bULL, 0x6e42e400c5808e0dULL,
-	0xa3b46966eeaefd23ULL, 0x0c4f1f0be39ecdcaULL, 0x189dc8c9d683a51dULL, 0x51f27f054c09351bULL,
-	0x4c487ccd2a320682ULL, 0x587ea95bb3df1c96ULL, 0xc8ccf79e555cb8e8ULL, 0x547dc829a206d73dULL,
-	0xb822a6cd80c39b06ULL, 0xe96d54732000d4c6ULL, 0x28535b6f91463b4dULL, 0x228f4660e2486e1dULL,
-	0x98799538de8d3abfULL, 0x8cd8330045ebca6eULL, 0x79952a008221e738ULL, 0x4322e1a7535cd2bbULL,
-	0xb114c11819d1801cULL, 0x2016e4d84f3f5ec7ULL, 0xdd0e2df409260f4cULL, 0x5ec362c0ae5f7266ULL,
-	0xc0462b18b8b2b4eeULL, 0x7cc8d950274d1afbULL, 0xf25f7105436b02d2ULL, 0x43bbf8dcbff9ccd3ULL,
-	0xb6ad1767a039e9dfULL, 0xb0714da8f69d3583ULL, 0x5e55fa18b42931f5ULL, 0x4ed5558f33c60961ULL,
-	0x1fe37901c647a5ddULL, 0x593ddf1f8081d357ULL, 0x0249a4fd813fd7a6ULL, 0x69acca274e9caf61ULL,
-	0x047ba3ea330721c9ULL, 0x83423fc20e7e1ea0ULL, 0x1df4c0af01314a60ULL, 0x09a62dab89289527ULL,
-	0xa5b325a49cc6cb00ULL, 0xe94b5dc654b56cb6ULL, 0x3be28779adc994a0ULL, 0x4296e8f8ba3a4aadULL,
-	0x328689761e451eabULL, 0x2e4d598bff59594aULL, 0x49b96853d7a7084aULL, 0x4980a319601420a8ULL,
-	0x9565b9e12f552c42ULL, 0x8a5318db7100fe96ULL, 0x05c90b4d43add0d7ULL, 0x538b4cd66a5d4edaULL,
-	0xf4e94fc3e89f039fULL, 0x592c9af26f618045ULL, 0x08a36eb5fd4b9550ULL, 0x25fffaf6c2ed1419ULL,
-	0x34434459cc79d354ULL, 0xeeecbfb4b1d5476bULL, 0xddeb34a061615d99ULL, 0x5129cecceb64b773ULL,
-	0xee43215894993520ULL, 0x772f9c7cf14c0b3bULL, 0xd2e2fce306bedad5ULL, 0x715f42b546f06a97ULL,
-	0x434ecdceda5b5f1aULL, 0x0da17115a49741a9ULL, 0x680bd77c73edad2eULL, 0x487c02354edd9041ULL,
-	0xb8efeff3a70ed9c4ULL, 0x56a32aa3e857e302ULL, 0xdf3a68bd48a2a5a0ULL, 0x07f650b73176c444ULL,
-	0xe38b9b1626e0ccb1ULL, 0x79e053c18b09fb36ULL, 0x56d90319c9f94964ULL, 0x1ca941e7ac9ff5c4ULL,
-	0x49c4df29162fa0bbULL, 0x8488cf3282b33305ULL, 0x95dfda14cabb437dULL, 0x3391f78264d5ad86ULL,
-	0x729ae06ae2b5095dULL, 0xd58a58d73259a946ULL, 0xe9834262d13921edULL, 0x27fedafaa54bb592ULL,
-	0xa99dc5b829ad48bbULL, 0x5f025742499ee260ULL, 0x802c8ecd5d7513fdULL, 0x78ceb3ef3f6dd938ULL,
-	0xc342f44f8a135d94ULL, 0x7b9edb44828cdda3ULL, 0x9436d11a0537cfe7ULL, 0x5064b164ec1ab4c8ULL,
-	0x7020eccfd37eb2fcULL, 0x1f31ea3ed90d25fcULL, 0x1b930d7bdfa1bb34ULL, 0x5344467a48113044ULL,
-	0x70073170f25e6dfbULL, 0xe385dc1a50114cc8ULL, 0x2348698ac8fc4f00ULL, 0x2a77a55284dd40d8ULL,
-	0xfe06afe0c98c6ce4ULL, 0xc235df96dddfd6e4ULL, 0x1428d01e33bf1ed3ULL, 0x785768ec9300bdafULL,
-	0x9702e57a91deb63bULL, 0x61bdb8bfe5ce8b80ULL, 0x645b426f3d1d58acULL, 0x4804a82227a557bcULL,
-	0x8e57048ab44d2601ULL, 0x68d6501a4b3a6935ULL, 0xc39c9ec3f9e1c293ULL, 0x4172f257d4de63e2ULL,
-	0xd368b450330c6401ULL, 0x040d3017418f2391ULL, 0x2c34bb6090b7d90dULL, 0x16f649228fdfd51fULL,
-	0xbea6818e2b928ef5ULL, 0xe28ccf91cdc11e72ULL, 0x594aaa68e77a36cdULL, 0x313034806c7ffd0fULL,
-	0x8a9d27ac2249bd65ULL, 0x19a3b464018e9512ULL, 0xc26ccff352b37ec7ULL, 0x056f68341d797b21ULL,
-	0x5e79d6757efd2327ULL, 0xfabdbcb6553afe15ULL, 0xd3e7222c6eaf5a60ULL, 0x7046c76d4dae743bULL,
-	0x660be872b18d4a55ULL, 0x19992518574e1496ULL, 0xc103053a302bdcbbULL, 0x3ed8e9800b218e8eULL,
-	0x7b0b9239fa75e03eULL, 0xefe9fb684633c083ULL, 0x98a35fbe391a7793ULL, 0x6065510fe2d0fe34ULL,
-	0x55cb668548abad0cULL, 0xb4584548da87e527ULL, 0x2c43ecea0107c1ddULL, 0x526028809372de35ULL,
-	0x3415c56af9213b1fULL, 0x5bee1a4d017e98dbULL, 0x13f6b105b5cf709bULL, 0x5ff20e3482b29ab6ULL,
-	0x0aa29c75cc2e6c90ULL, 0xfc7d73ca3a70e206ULL, 0x899fc38fc4b5c515ULL, 0x250386b124ffc207ULL,
-	0x54ea28d5ae3d2b56ULL, 0x9913149dd6de60ceULL, 0x16694fc58f06d6c1ULL, 0x46b23975eb018fc7ULL,
-	0x470a6a0fb4b7b4e2ULL, 0x5d92475a8f7253deULL, 0xabeee5b52fbd3adbULL, 0x7fa20801a0806968ULL,
-	0x76f3faf19f7714d2ULL, 0xb3e840c12f4660c3ULL, 0x0fb4cd8df212744eULL, 0x4b065a251d3a2dd2ULL,
-	0x5cebde383d77cd4aULL, 0x6adf39df882c9cb1ULL, 0xa2dd242eb09af759ULL, 0x3147c0e50e5f6422ULL,
-	0x164ca5101d1350dbULL, 0xf8d13479c33fc962ULL, 0xe640ce4d13e5da08ULL, 0x4bdee0c45061f8baULL,
-	0xd7c46dc1a4edb1c9ULL, 0x5514d7b6437fd98aULL, 0x58942f6bb2a1c00bULL, 0x2dffb2ab1d70710eULL,
-	0xccdfcf2fc18b6d68ULL, 0xa8ebcba8b7806167ULL, 0x980697f95e2937e3ULL, 0x02fbba1cd0126e8cULL
-};
-
-static void curve25519_ever64_base(u8 *out, const u8 *priv)
-{
-	u64 swap = 1;
-	int i, j, k;
-	u64 tmp[16 + 32 + 4];
-	u64 *x1 = &tmp[0];
-	u64 *z1 = &tmp[4];
-	u64 *x2 = &tmp[8];
-	u64 *z2 = &tmp[12];
-	u64 *xz1 = &tmp[0];
-	u64 *xz2 = &tmp[8];
-	u64 *a = &tmp[0 + 16];
-	u64 *b = &tmp[4 + 16];
-	u64 *c = &tmp[8 + 16];
-	u64 *ab = &tmp[0 + 16];
-	u64 *abcd = &tmp[0 + 16];
-	u64 *ef = &tmp[16 + 16];
-	u64 *efgh = &tmp[16 + 16];
-	u64 *key = &tmp[0 + 16 + 32];
-
-	memcpy(key, priv, 32);
-	((u8 *)key)[0] &= 248;
-	((u8 *)key)[31] = (((u8 *)key)[31] & 127) | 64;
-
-	x1[0] = 1, x1[1] = x1[2] = x1[3] = 0;
-	z1[0] = 1, z1[1] = z1[2] = z1[3] = 0;
-	z2[0] = 1, z2[1] = z2[2] = z2[3] = 0;
-	memcpy(x2, p_minus_s, sizeof(p_minus_s));
-
-	j = 3;
-	for (i = 0; i < 4; ++i) {
-		while (j < (const int[]){ 64, 64, 64, 63 }[i]) {
-			u64 bit = (key[i] >> j) & 1;
-			k = (64 * i + j - 3);
-			swap = swap ^ bit;
-			cswap2(swap, xz1, xz2);
-			swap = bit;
-			fsub(b, x1, z1);
-			fadd(a, x1, z1);
-			fmul(c, &table_ladder[4 * k], b, ef);
-			fsub(b, a, c);
-			fadd(a, a, c);
-			fsqr2(ab, ab, efgh);
-			fmul2(xz1, xz2, ab, efgh);
-			++j;
-		}
-		j = 0;
-	}
-
-	point_double(xz1, abcd, efgh);
-	point_double(xz1, abcd, efgh);
-	point_double(xz1, abcd, efgh);
-	encode_point(out, xz1);
-
-	memzero_explicit(tmp, sizeof(tmp));
-}
-
-static __ro_after_init DEFINE_STATIC_KEY_FALSE(curve25519_use_bmi2_adx);
-
-void curve25519_arch(u8 mypublic[CURVE25519_KEY_SIZE],
-		     const u8 secret[CURVE25519_KEY_SIZE],
-		     const u8 basepoint[CURVE25519_KEY_SIZE])
-{
-	if (static_branch_likely(&curve25519_use_bmi2_adx))
-		curve25519_ever64(mypublic, secret, basepoint);
-	else
-		curve25519_generic(mypublic, secret, basepoint);
-}
-EXPORT_SYMBOL(curve25519_arch);
-
-void curve25519_base_arch(u8 pub[CURVE25519_KEY_SIZE],
-			  const u8 secret[CURVE25519_KEY_SIZE])
-{
-	if (static_branch_likely(&curve25519_use_bmi2_adx))
-		curve25519_ever64_base(pub, secret);
-	else
-		curve25519_generic(pub, secret, curve25519_base_point);
-}
-EXPORT_SYMBOL(curve25519_base_arch);
-
-static int curve25519_set_secret(struct crypto_kpp *tfm, const void *buf,
-				 unsigned int len)
-{
-	u8 *secret = kpp_tfm_ctx(tfm);
-
-	if (!len)
-		curve25519_generate_secret(secret);
-	else if (len == CURVE25519_KEY_SIZE &&
-		 crypto_memneq(buf, curve25519_null_point, CURVE25519_KEY_SIZE))
-		memcpy(secret, buf, CURVE25519_KEY_SIZE);
-	else
-		return -EINVAL;
-	return 0;
-}
-
-static int curve25519_generate_public_key(struct kpp_request *req)
-{
-	struct crypto_kpp *tfm = crypto_kpp_reqtfm(req);
-	const u8 *secret = kpp_tfm_ctx(tfm);
-	u8 buf[CURVE25519_KEY_SIZE];
-	int copied, nbytes;
-
-	if (req->src)
-		return -EINVAL;
-
-	curve25519_base_arch(buf, secret);
-
-	/* might want less than we've got */
-	nbytes = min_t(size_t, CURVE25519_KEY_SIZE, req->dst_len);
-	copied = sg_copy_from_buffer(req->dst, sg_nents_for_len(req->dst,
-								nbytes),
-				     buf, nbytes);
-	if (copied != nbytes)
-		return -EINVAL;
-	return 0;
-}
-
-static int curve25519_compute_shared_secret(struct kpp_request *req)
-{
-	struct crypto_kpp *tfm = crypto_kpp_reqtfm(req);
-	const u8 *secret = kpp_tfm_ctx(tfm);
-	u8 public_key[CURVE25519_KEY_SIZE];
-	u8 buf[CURVE25519_KEY_SIZE];
-	int copied, nbytes;
-
-	if (!req->src)
-		return -EINVAL;
-
-	copied = sg_copy_to_buffer(req->src,
-				   sg_nents_for_len(req->src,
-						    CURVE25519_KEY_SIZE),
-				   public_key, CURVE25519_KEY_SIZE);
-	if (copied != CURVE25519_KEY_SIZE)
-		return -EINVAL;
-
-	curve25519_arch(buf, secret, public_key);
-
-	/* might want less than we've got */
-	nbytes = min_t(size_t, CURVE25519_KEY_SIZE, req->dst_len);
-	copied = sg_copy_from_buffer(req->dst, sg_nents_for_len(req->dst,
-								nbytes),
-				     buf, nbytes);
-	if (copied != nbytes)
-		return -EINVAL;
-	return 0;
-}
-
-static unsigned int curve25519_max_size(struct crypto_kpp *tfm)
-{
-	return CURVE25519_KEY_SIZE;
-}
-
-static struct kpp_alg curve25519_alg = {
-	.base.cra_name		= "curve25519",
-	.base.cra_driver_name	= "curve25519-x86",
-	.base.cra_priority	= 200,
-	.base.cra_module	= THIS_MODULE,
-	.base.cra_ctxsize	= CURVE25519_KEY_SIZE,
-
-	.set_secret		= curve25519_set_secret,
-	.generate_public_key	= curve25519_generate_public_key,
-	.compute_shared_secret	= curve25519_compute_shared_secret,
-	.max_size		= curve25519_max_size,
-};
-
-
-static int __init curve25519_mod_init(void)
-{
-	if (boot_cpu_has(X86_FEATURE_BMI2) && boot_cpu_has(X86_FEATURE_ADX))
-		static_branch_enable(&curve25519_use_bmi2_adx);
-	else
-		return 0;
-	return IS_REACHABLE(CONFIG_CRYPTO_KPP) ?
-		crypto_register_kpp(&curve25519_alg) : 0;
-}
-
-static void __exit curve25519_mod_exit(void)
-{
-	if (IS_REACHABLE(CONFIG_CRYPTO_KPP) &&
-	    static_branch_likely(&curve25519_use_bmi2_adx))
-		crypto_unregister_kpp(&curve25519_alg);
-}
-
-module_init(curve25519_mod_init);
-module_exit(curve25519_mod_exit);
-
-MODULE_ALIAS_CRYPTO("curve25519");
-MODULE_ALIAS_CRYPTO("curve25519-x86");
-MODULE_DESCRIPTION("Curve25519 algorithm, ADX optimized");
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Jason A. Donenfeld <Jason@zx2c4.com>");
diff --git a/arch/x86/entry/syscalls/syscall_64.tbl b/arch/x86/entry/syscalls/syscall_64.tbl
index 92cf0fe2291e..ced2a1deecd7 100644
--- a/arch/x86/entry/syscalls/syscall_64.tbl
+++ b/arch/x86/entry/syscalls/syscall_64.tbl
@@ -345,6 +345,7 @@
 333	common	io_pgetevents		sys_io_pgetevents
 334	common	rseq			sys_rseq
 335	common	uretprobe		sys_uretprobe
+336	common	uprobe			sys_uprobe
 # don't use numbers 387 through 423, add new calls after the last
 # 'common' entry
 424	common	pidfd_send_signal	sys_pidfd_send_signal
diff --git a/arch/x86/events/core.c b/arch/x86/events/core.c
index 7610f26dfbd9..745caa6c15a3 100644
--- a/arch/x86/events/core.c
+++ b/arch/x86/events/core.c
@@ -2069,13 +2069,15 @@ static void _x86_pmu_read(struct perf_event *event)
 
 void x86_pmu_show_pmu_cap(struct pmu *pmu)
 {
-	pr_info("... version:                %d\n",     x86_pmu.version);
-	pr_info("... bit width:              %d\n",     x86_pmu.cntval_bits);
-	pr_info("... generic registers:      %d\n",     x86_pmu_num_counters(pmu));
-	pr_info("... value mask:             %016Lx\n", x86_pmu.cntval_mask);
-	pr_info("... max period:             %016Lx\n", x86_pmu.max_period);
-	pr_info("... fixed-purpose events:   %d\n",     x86_pmu_num_counters_fixed(pmu));
-	pr_info("... event mask:             %016Lx\n", hybrid(pmu, intel_ctrl));
+	pr_info("... version:                   %d\n", x86_pmu.version);
+	pr_info("... bit width:                 %d\n", x86_pmu.cntval_bits);
+	pr_info("... generic counters:          %d\n", x86_pmu_num_counters(pmu));
+	pr_info("... generic bitmap:            %016llx\n", hybrid(pmu, cntr_mask64));
+	pr_info("... fixed-purpose counters:    %d\n", x86_pmu_num_counters_fixed(pmu));
+	pr_info("... fixed-purpose bitmap:      %016llx\n", hybrid(pmu, fixed_cntr_mask64));
+	pr_info("... value mask:                %016llx\n", x86_pmu.cntval_mask);
+	pr_info("... max period:                %016llx\n", x86_pmu.max_period);
+	pr_info("... global_ctrl mask:          %016llx\n", hybrid(pmu, intel_ctrl));
 }
 
 static int __init init_hw_perf_events(void)
diff --git a/arch/x86/events/intel/bts.c b/arch/x86/events/intel/bts.c
index 61da6b8a3d51..cbac54cb3a9e 100644
--- a/arch/x86/events/intel/bts.c
+++ b/arch/x86/events/intel/bts.c
@@ -643,4 +643,4 @@ static __init int bts_init(void)
 
 	return perf_pmu_register(&bts_pmu, "intel_bts", -1);
 }
-arch_initcall(bts_init);
+early_initcall(bts_init);
diff --git a/arch/x86/events/intel/core.c b/arch/x86/events/intel/core.c
index c2fb729c270e..28f5468a6ea3 100644
--- a/arch/x86/events/intel/core.c
+++ b/arch/x86/events/intel/core.c
@@ -2845,8 +2845,8 @@ static void intel_pmu_enable_fixed(struct perf_event *event)
 {
 	struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
 	struct hw_perf_event *hwc = &event->hw;
-	u64 mask, bits = 0;
 	int idx = hwc->idx;
+	u64 bits = 0;
 
 	if (is_topdown_idx(idx)) {
 		struct cpu_hw_events *cpuc = this_cpu_ptr(&cpu_hw_events);
@@ -2885,14 +2885,10 @@ static void intel_pmu_enable_fixed(struct perf_event *event)
 
 	idx -= INTEL_PMC_IDX_FIXED;
 	bits = intel_fixed_bits_by_idx(idx, bits);
-	mask = intel_fixed_bits_by_idx(idx, INTEL_FIXED_BITS_MASK);
-
-	if (x86_pmu.intel_cap.pebs_baseline && event->attr.precise_ip) {
+	if (x86_pmu.intel_cap.pebs_baseline && event->attr.precise_ip)
 		bits |= intel_fixed_bits_by_idx(idx, ICL_FIXED_0_ADAPTIVE);
-		mask |= intel_fixed_bits_by_idx(idx, ICL_FIXED_0_ADAPTIVE);
-	}
 
-	cpuc->fixed_ctrl_val &= ~mask;
+	cpuc->fixed_ctrl_val &= ~intel_fixed_bits_by_idx(idx, INTEL_FIXED_BITS_MASK);
 	cpuc->fixed_ctrl_val |= bits;
 }
 
@@ -2997,7 +2993,8 @@ static void intel_pmu_acr_late_setup(struct cpu_hw_events *cpuc)
 			if (event->group_leader != leader->group_leader)
 				break;
 			for_each_set_bit(idx, (unsigned long *)&event->attr.config2, X86_PMC_IDX_MAX) {
-				if (WARN_ON_ONCE(i + idx > cpuc->n_events))
+				if (i + idx >= cpuc->n_events ||
+				    !is_acr_event_group(cpuc->event_list[i + idx]))
 					return;
 				__set_bit(cpuc->assign[i + idx], (unsigned long *)&event->hw.config1);
 			}
@@ -5318,9 +5315,9 @@ static void intel_pmu_check_hybrid_pmus(struct x86_hybrid_pmu *pmu)
 						0, x86_pmu_num_counters(&pmu->pmu), 0, 0);
 
 	if (pmu->intel_cap.perf_metrics)
-		pmu->intel_ctrl |= 1ULL << GLOBAL_CTRL_EN_PERF_METRICS;
+		pmu->intel_ctrl |= GLOBAL_CTRL_EN_PERF_METRICS;
 	else
-		pmu->intel_ctrl &= ~(1ULL << GLOBAL_CTRL_EN_PERF_METRICS);
+		pmu->intel_ctrl &= ~GLOBAL_CTRL_EN_PERF_METRICS;
 
 	intel_pmu_check_event_constraints(pmu->event_constraints,
 					  pmu->cntr_mask64,
@@ -5455,7 +5452,7 @@ static void intel_pmu_cpu_starting(int cpu)
 		rdmsrq(MSR_IA32_PERF_CAPABILITIES, perf_cap.capabilities);
 		if (!perf_cap.perf_metrics) {
 			x86_pmu.intel_cap.perf_metrics = 0;
-			x86_pmu.intel_ctrl &= ~(1ULL << GLOBAL_CTRL_EN_PERF_METRICS);
+			x86_pmu.intel_ctrl &= ~GLOBAL_CTRL_EN_PERF_METRICS;
 		}
 	}
 
@@ -7789,7 +7786,7 @@ __init int intel_pmu_init(void)
 	}
 
 	if (!is_hybrid() && x86_pmu.intel_cap.perf_metrics)
-		x86_pmu.intel_ctrl |= 1ULL << GLOBAL_CTRL_EN_PERF_METRICS;
+		x86_pmu.intel_ctrl |= GLOBAL_CTRL_EN_PERF_METRICS;
 
 	if (x86_pmu.intel_cap.pebs_timing_info)
 		x86_pmu.flags |= PMU_FL_RETIRE_LATENCY;
diff --git a/arch/x86/include/asm/apic.h b/arch/x86/include/asm/apic.h
index 07ba4935e873..a26e66d66444 100644
--- a/arch/x86/include/asm/apic.h
+++ b/arch/x86/include/asm/apic.h
@@ -305,6 +305,8 @@ struct apic {
 
 	/* Probe, setup and smpboot functions */
 	int	(*probe)(void);
+	void	(*setup)(void);
+	void	(*teardown)(void);
 	int	(*acpi_madt_oem_check)(char *oem_id, char *oem_table_id);
 
 	void	(*init_apic_ldr)(void);
@@ -317,6 +319,8 @@ struct apic {
 	/* wakeup secondary CPU using 64-bit wakeup point */
 	int	(*wakeup_secondary_cpu_64)(u32 apicid, unsigned long start_eip, unsigned int cpu);
 
+	void	(*update_vector)(unsigned int cpu, unsigned int vector, bool set);
+
 	char	*name;
 };
 
@@ -470,6 +474,12 @@ static __always_inline bool apic_id_valid(u32 apic_id)
 	return apic_id <= apic->max_apic_id;
 }
 
+static __always_inline void apic_update_vector(unsigned int cpu, unsigned int vector, bool set)
+{
+	if (apic->update_vector)
+		apic->update_vector(cpu, vector, set);
+}
+
 #else /* CONFIG_X86_LOCAL_APIC */
 
 static inline u32 apic_read(u32 reg) { return 0; }
@@ -481,6 +491,7 @@ static inline void apic_wait_icr_idle(void) { }
 static inline u32 safe_apic_wait_icr_idle(void) { return 0; }
 static inline void apic_native_eoi(void) { WARN_ON_ONCE(1); }
 static inline void apic_setup_apic_calls(void) { }
+static inline void apic_update_vector(unsigned int cpu, unsigned int vector, bool set) { }
 
 #define apic_update_callback(_callback, _fn) do { } while (0)
 
diff --git a/arch/x86/include/asm/apicdef.h b/arch/x86/include/asm/apicdef.h
index 094106b6a538..be39a543fbe5 100644
--- a/arch/x86/include/asm/apicdef.h
+++ b/arch/x86/include/asm/apicdef.h
@@ -135,6 +135,8 @@
 #define		APIC_TDR_DIV_128	0xA
 #define	APIC_EFEAT	0x400
 #define	APIC_ECTRL	0x410
+#define APIC_SEOI	0x420
+#define APIC_IER	0x480
 #define APIC_EILVTn(n)	(0x500 + 0x10 * n)
 #define		APIC_EILVT_NR_AMD_K8	1	/* # of extended interrupts */
 #define		APIC_EILVT_NR_AMD_10H	4
diff --git a/arch/x86/include/asm/bitops.h b/arch/x86/include/asm/bitops.h
index eebbc8889e70..a835f891164d 100644
--- a/arch/x86/include/asm/bitops.h
+++ b/arch/x86/include/asm/bitops.h
@@ -246,7 +246,7 @@ arch_test_bit_acquire(unsigned long nr, const volatile unsigned long *addr)
 					  variable_test_bit(nr, addr);
 }
 
-static __always_inline unsigned long variable__ffs(unsigned long word)
+static __always_inline __attribute_const__ unsigned long variable__ffs(unsigned long word)
 {
 	asm("tzcnt %1,%0"
 		: "=r" (word)
@@ -265,7 +265,7 @@ static __always_inline unsigned long variable__ffs(unsigned long word)
 	 (unsigned long)__builtin_ctzl(word) :	\
 	 variable__ffs(word))
 
-static __always_inline unsigned long variable_ffz(unsigned long word)
+static __always_inline __attribute_const__ unsigned long variable_ffz(unsigned long word)
 {
 	return variable__ffs(~word);
 }
@@ -287,7 +287,7 @@ static __always_inline unsigned long variable_ffz(unsigned long word)
  *
  * Undefined if no set bit exists, so code should check against 0 first.
  */
-static __always_inline unsigned long __fls(unsigned long word)
+static __always_inline __attribute_const__ unsigned long __fls(unsigned long word)
 {
 	if (__builtin_constant_p(word))
 		return BITS_PER_LONG - 1 - __builtin_clzl(word);
@@ -301,7 +301,7 @@ static __always_inline unsigned long __fls(unsigned long word)
 #undef ADDR
 
 #ifdef __KERNEL__
-static __always_inline int variable_ffs(int x)
+static __always_inline __attribute_const__ int variable_ffs(int x)
 {
 	int r;
 
@@ -355,7 +355,7 @@ static __always_inline int variable_ffs(int x)
  * set bit if value is nonzero. The last (most significant) bit is
  * at position 32.
  */
-static __always_inline int fls(unsigned int x)
+static __always_inline __attribute_const__ int fls(unsigned int x)
 {
 	int r;
 
@@ -400,7 +400,7 @@ static __always_inline int fls(unsigned int x)
  * at position 64.
  */
 #ifdef CONFIG_X86_64
-static __always_inline int fls64(__u64 x)
+static __always_inline __attribute_const__ int fls64(__u64 x)
 {
 	int bitpos = -1;
 
diff --git a/arch/x86/include/asm/boot.h b/arch/x86/include/asm/boot.h
index 02b23aa78955..f7b67cb73915 100644
--- a/arch/x86/include/asm/boot.h
+++ b/arch/x86/include/asm/boot.h
@@ -82,6 +82,8 @@
 #ifndef __ASSEMBLER__
 extern unsigned int output_len;
 extern const unsigned long kernel_text_size;
+extern const unsigned long kernel_inittext_offset;
+extern const unsigned long kernel_inittext_size;
 extern const unsigned long kernel_total_size;
 
 unsigned long decompress_kernel(unsigned char *outbuf, unsigned long virt_addr,
diff --git a/arch/x86/include/asm/cfi.h b/arch/x86/include/asm/cfi.h
index 1751f1eb95ef..976b90a3d190 100644
--- a/arch/x86/include/asm/cfi.h
+++ b/arch/x86/include/asm/cfi.h
@@ -113,7 +113,7 @@ extern bhi_thunk __bhi_args_end[];
 
 struct pt_regs;
 
-#ifdef CONFIG_CFI_CLANG
+#ifdef CONFIG_CFI
 enum bug_trap_type handle_cfi_failure(struct pt_regs *regs);
 #define __bpfcall
 
@@ -157,7 +157,7 @@ static inline int cfi_get_func_arity(void *func)
 {
 	return 0;
 }
-#endif /* CONFIG_CFI_CLANG */
+#endif /* CONFIG_CFI */
 
 #if HAS_KERNEL_IBT == 1
 #define CFI_NOSEAL(x)	asm(IBT_NOSEAL(__stringify(x)))
diff --git a/arch/x86/include/asm/cpufeatures.h b/arch/x86/include/asm/cpufeatures.h
index 602957dd2609..b2a562217d3f 100644
--- a/arch/x86/include/asm/cpufeatures.h
+++ b/arch/x86/include/asm/cpufeatures.h
@@ -218,6 +218,7 @@
 #define X86_FEATURE_FLEXPRIORITY	( 8*32+ 1) /* "flexpriority" Intel FlexPriority */
 #define X86_FEATURE_EPT			( 8*32+ 2) /* "ept" Intel Extended Page Table */
 #define X86_FEATURE_VPID		( 8*32+ 3) /* "vpid" Intel Virtual Processor ID */
+#define X86_FEATURE_COHERENCY_SFW_NO	( 8*32+ 4) /* SNP cache coherency software work around not needed */
 
 #define X86_FEATURE_VMMCALL		( 8*32+15) /* "vmmcall" Prefer VMMCALL to VMCALL */
 #define X86_FEATURE_XENPV		( 8*32+16) /* Xen paravirtual guest */
@@ -494,6 +495,8 @@
 #define X86_FEATURE_TSA_SQ_NO		(21*32+11) /* AMD CPU not vulnerable to TSA-SQ */
 #define X86_FEATURE_TSA_L1_NO		(21*32+12) /* AMD CPU not vulnerable to TSA-L1 */
 #define X86_FEATURE_CLEAR_CPU_BUF_VM	(21*32+13) /* Clear CPU buffers using VERW before VMRUN */
+#define X86_FEATURE_IBPB_EXIT_TO_USER	(21*32+14) /* Use IBPB on exit-to-userspace, see VMSCAPE bug */
+#define X86_FEATURE_ABMC		(21*32+15) /* Assignable Bandwidth Monitoring Counters */
 
 /*
  * BUG word(s)
@@ -550,4 +553,5 @@
 #define X86_BUG_ITS			X86_BUG( 1*32+ 7) /* "its" CPU is affected by Indirect Target Selection */
 #define X86_BUG_ITS_NATIVE_ONLY		X86_BUG( 1*32+ 8) /* "its_native_only" CPU is affected by ITS, VMX is not affected */
 #define X86_BUG_TSA			X86_BUG( 1*32+ 9) /* "tsa" CPU is affected by Transient Scheduler Attacks */
+#define X86_BUG_VMSCAPE			X86_BUG( 1*32+10) /* "vmscape" CPU is affected by VMSCAPE attacks from guests */
 #endif /* _ASM_X86_CPUFEATURES_H */
diff --git a/arch/x86/include/asm/cpuid.h b/arch/x86/include/asm/cpuid.h
deleted file mode 100644
index d5749b25fa10..000000000000
--- a/arch/x86/include/asm/cpuid.h
+++ /dev/null
@@ -1,8 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-
-#ifndef _ASM_X86_CPUID_H
-#define _ASM_X86_CPUID_H
-
-#include <asm/cpuid/api.h>
-
-#endif /* _ASM_X86_CPUID_H */
diff --git a/arch/x86/include/asm/entry-common.h b/arch/x86/include/asm/entry-common.h
index d535a97c7284..ce3eb6d5fdf9 100644
--- a/arch/x86/include/asm/entry-common.h
+++ b/arch/x86/include/asm/entry-common.h
@@ -93,6 +93,13 @@ static inline void arch_exit_to_user_mode_prepare(struct pt_regs *regs,
 	 * 8 (ia32) bits.
 	 */
 	choose_random_kstack_offset(rdtsc());
+
+	/* Avoid unnecessary reads of 'x86_ibpb_exit_to_user' */
+	if (cpu_feature_enabled(X86_FEATURE_IBPB_EXIT_TO_USER) &&
+	    this_cpu_read(x86_ibpb_exit_to_user)) {
+		indirect_branch_prediction_barrier();
+		this_cpu_write(x86_ibpb_exit_to_user, false);
+	}
 }
 #define arch_exit_to_user_mode_prepare arch_exit_to_user_mode_prepare
 
diff --git a/arch/x86/include/asm/floppy.h b/arch/x86/include/asm/floppy.h
index 6ec3fc969ad5..e7a244051c62 100644
--- a/arch/x86/include/asm/floppy.h
+++ b/arch/x86/include/asm/floppy.h
@@ -10,6 +10,7 @@
 #ifndef _ASM_X86_FLOPPY_H
 #define _ASM_X86_FLOPPY_H
 
+#include <linux/sizes.h>
 #include <linux/vmalloc.h>
 
 /*
@@ -22,10 +23,7 @@
  */
 #define _CROSS_64KB(a, s, vdma)						\
 	(!(vdma) &&							\
-	 ((unsigned long)(a)/K_64 != ((unsigned long)(a) + (s) - 1) / K_64))
-
-#define CROSS_64KB(a, s) _CROSS_64KB(a, s, use_virtual_dma & 1)
-
+	 ((unsigned long)(a) / SZ_64K != ((unsigned long)(a) + (s) - 1) / SZ_64K))
 
 #define SW fd_routine[use_virtual_dma & 1]
 #define CSW fd_routine[can_use_virtual_dma & 1]
@@ -206,7 +204,7 @@ static int vdma_dma_setup(char *addr, unsigned long size, int mode, int io)
 static int hard_dma_setup(char *addr, unsigned long size, int mode, int io)
 {
 #ifdef FLOPPY_SANITY_CHECK
-	if (CROSS_64KB(addr, size)) {
+	if (_CROSS_64KB(addr, size, use_virtual_dma & 1)) {
 		printk("DMA crossing 64-K boundary %p-%p\n", addr, addr+size);
 		return -1;
 	}
diff --git a/arch/x86/include/asm/fpu/sched.h b/arch/x86/include/asm/fpu/sched.h
index c060549c6c94..89004f4ca208 100644
--- a/arch/x86/include/asm/fpu/sched.h
+++ b/arch/x86/include/asm/fpu/sched.h
@@ -11,7 +11,7 @@
 
 extern void save_fpregs_to_fpstate(struct fpu *fpu);
 extern void fpu__drop(struct task_struct *tsk);
-extern int  fpu_clone(struct task_struct *dst, unsigned long clone_flags, bool minimal,
+extern int  fpu_clone(struct task_struct *dst, u64 clone_flags, bool minimal,
 		      unsigned long shstk_addr);
 extern void fpu_flush_thread(void);
 
diff --git a/arch/x86/include/asm/hypervisor.h b/arch/x86/include/asm/hypervisor.h
index e41cbf2ec41d..9ad86a7d13f6 100644
--- a/arch/x86/include/asm/hypervisor.h
+++ b/arch/x86/include/asm/hypervisor.h
@@ -30,6 +30,7 @@ enum x86_hypervisor_type {
 	X86_HYPER_KVM,
 	X86_HYPER_JAILHOUSE,
 	X86_HYPER_ACRN,
+	X86_HYPER_BHYVE,
 };
 
 #ifdef CONFIG_HYPERVISOR_GUEST
@@ -64,6 +65,7 @@ extern const struct hypervisor_x86 x86_hyper_xen_pv;
 extern const struct hypervisor_x86 x86_hyper_kvm;
 extern const struct hypervisor_x86 x86_hyper_jailhouse;
 extern const struct hypervisor_x86 x86_hyper_acrn;
+extern const struct hypervisor_x86 x86_hyper_bhyve;
 extern struct hypervisor_x86 x86_hyper_xen_hvm;
 
 extern bool nopv;
diff --git a/arch/x86/include/asm/inat.h b/arch/x86/include/asm/inat.h
index 97f341777db5..1b3060a3425c 100644
--- a/arch/x86/include/asm/inat.h
+++ b/arch/x86/include/asm/inat.h
@@ -37,6 +37,8 @@
 #define INAT_PFX_EVEX	15	/* EVEX prefix */
 /* x86-64 REX2 prefix */
 #define INAT_PFX_REX2	16	/* 0xD5 */
+/* AMD XOP prefix */
+#define INAT_PFX_XOP	17	/* 0x8F */
 
 #define INAT_LSTPFX_MAX	3
 #define INAT_LGCPFX_MAX	11
@@ -77,6 +79,7 @@
 #define INAT_MOFFSET	(1 << (INAT_FLAG_OFFS + 3))
 #define INAT_VARIANT	(1 << (INAT_FLAG_OFFS + 4))
 #define INAT_VEXOK	(1 << (INAT_FLAG_OFFS + 5))
+#define INAT_XOPOK	INAT_VEXOK
 #define INAT_VEXONLY	(1 << (INAT_FLAG_OFFS + 6))
 #define INAT_EVEXONLY	(1 << (INAT_FLAG_OFFS + 7))
 #define INAT_NO_REX2	(1 << (INAT_FLAG_OFFS + 8))
@@ -111,6 +114,8 @@ extern insn_attr_t inat_get_group_attribute(insn_byte_t modrm,
 extern insn_attr_t inat_get_avx_attribute(insn_byte_t opcode,
 					  insn_byte_t vex_m,
 					  insn_byte_t vex_pp);
+extern insn_attr_t inat_get_xop_attribute(insn_byte_t opcode,
+					  insn_byte_t map_select);
 
 /* Attribute checking functions */
 static inline int inat_is_legacy_prefix(insn_attr_t attr)
@@ -164,6 +169,11 @@ static inline int inat_is_vex3_prefix(insn_attr_t attr)
 	return (attr & INAT_PFX_MASK) == INAT_PFX_VEX3;
 }
 
+static inline int inat_is_xop_prefix(insn_attr_t attr)
+{
+	return (attr & INAT_PFX_MASK) == INAT_PFX_XOP;
+}
+
 static inline int inat_is_escape(insn_attr_t attr)
 {
 	return attr & INAT_ESC_MASK;
@@ -229,6 +239,11 @@ static inline int inat_accept_vex(insn_attr_t attr)
 	return attr & INAT_VEXOK;
 }
 
+static inline int inat_accept_xop(insn_attr_t attr)
+{
+	return attr & INAT_XOPOK;
+}
+
 static inline int inat_must_vex(insn_attr_t attr)
 {
 	return attr & (INAT_VEXONLY | INAT_EVEXONLY);
diff --git a/arch/x86/include/asm/init.h b/arch/x86/include/asm/init.h
index 5a68e9db6518..01ccdd168df0 100644
--- a/arch/x86/include/asm/init.h
+++ b/arch/x86/include/asm/init.h
@@ -2,12 +2,6 @@
 #ifndef _ASM_X86_INIT_H
 #define _ASM_X86_INIT_H
 
-#if defined(CONFIG_CC_IS_CLANG) && CONFIG_CLANG_VERSION < 170000
-#define __head	__section(".head.text") __no_sanitize_undefined __no_stack_protector
-#else
-#define __head	__section(".head.text") __no_sanitize_undefined __no_kstack_erase
-#endif
-
 struct x86_mapping_info {
 	void *(*alloc_pgt_page)(void *); /* allocate buf for page table */
 	void (*free_pgt_page)(void *, void *); /* free buf for page table */
diff --git a/arch/x86/include/asm/insn.h b/arch/x86/include/asm/insn.h
index 7152ea809e6a..091f88c8254d 100644
--- a/arch/x86/include/asm/insn.h
+++ b/arch/x86/include/asm/insn.h
@@ -71,7 +71,10 @@ struct insn {
 					 * prefixes.bytes[3]: last prefix
 					 */
 	struct insn_field rex_prefix;	/* REX prefix */
-	struct insn_field vex_prefix;	/* VEX prefix */
+	union {
+		struct insn_field vex_prefix;	/* VEX prefix */
+		struct insn_field xop_prefix;	/* XOP prefix */
+	};
 	struct insn_field opcode;	/*
 					 * opcode.bytes[0]: opcode1
 					 * opcode.bytes[1]: opcode2
@@ -135,6 +138,17 @@ struct insn {
 #define X86_VEX_V(vex)	(((vex) & 0x78) >> 3)	/* VEX3 Byte2, VEX2 Byte1 */
 #define X86_VEX_P(vex)	((vex) & 0x03)		/* VEX3 Byte2, VEX2 Byte1 */
 #define X86_VEX_M_MAX	0x1f			/* VEX3.M Maximum value */
+/* XOP bit fields */
+#define X86_XOP_R(xop)	((xop) & 0x80)	/* XOP Byte2 */
+#define X86_XOP_X(xop)	((xop) & 0x40)	/* XOP Byte2 */
+#define X86_XOP_B(xop)	((xop) & 0x20)	/* XOP Byte2 */
+#define X86_XOP_M(xop)	((xop) & 0x1f)	/* XOP Byte2 */
+#define X86_XOP_W(xop)	((xop) & 0x80)	/* XOP Byte3 */
+#define X86_XOP_V(xop)	((xop) & 0x78)	/* XOP Byte3 */
+#define X86_XOP_L(xop)	((xop) & 0x04)	/* XOP Byte3 */
+#define X86_XOP_P(xop)	((xop) & 0x03)	/* XOP Byte3 */
+#define X86_XOP_M_MIN	0x08	/* Min of XOP.M */
+#define X86_XOP_M_MAX	0x1f	/* Max of XOP.M */
 
 extern void insn_init(struct insn *insn, const void *kaddr, int buf_len, int x86_64);
 extern int insn_get_prefixes(struct insn *insn);
@@ -178,7 +192,7 @@ static inline insn_byte_t insn_rex2_m_bit(struct insn *insn)
 	return X86_REX2_M(insn->rex_prefix.bytes[1]);
 }
 
-static inline int insn_is_avx(struct insn *insn)
+static inline int insn_is_avx_or_xop(struct insn *insn)
 {
 	if (!insn->prefixes.got)
 		insn_get_prefixes(insn);
@@ -192,6 +206,22 @@ static inline int insn_is_evex(struct insn *insn)
 	return (insn->vex_prefix.nbytes == 4);
 }
 
+/* If we already know this is AVX/XOP encoded */
+static inline int avx_insn_is_xop(struct insn *insn)
+{
+	insn_attr_t attr = inat_get_opcode_attribute(insn->vex_prefix.bytes[0]);
+
+	return inat_is_xop_prefix(attr);
+}
+
+static inline int insn_is_xop(struct insn *insn)
+{
+	if (!insn_is_avx_or_xop(insn))
+		return 0;
+
+	return avx_insn_is_xop(insn);
+}
+
 static inline int insn_has_emulate_prefix(struct insn *insn)
 {
 	return !!insn->emulate_prefix_size;
@@ -222,11 +252,26 @@ static inline insn_byte_t insn_vex_w_bit(struct insn *insn)
 	return X86_VEX_W(insn->vex_prefix.bytes[2]);
 }
 
+static inline insn_byte_t insn_xop_map_bits(struct insn *insn)
+{
+	if (insn->xop_prefix.nbytes < 3)	/* XOP is 3 bytes */
+		return 0;
+	return X86_XOP_M(insn->xop_prefix.bytes[1]);
+}
+
+static inline insn_byte_t insn_xop_p_bits(struct insn *insn)
+{
+	return X86_XOP_P(insn->vex_prefix.bytes[2]);
+}
+
 /* Get the last prefix id from last prefix or VEX prefix */
 static inline int insn_last_prefix_id(struct insn *insn)
 {
-	if (insn_is_avx(insn))
+	if (insn_is_avx_or_xop(insn)) {
+		if (avx_insn_is_xop(insn))
+			return insn_xop_p_bits(insn);
 		return insn_vex_p_bits(insn);	/* VEX_p is a SIMD prefix id */
+	}
 
 	if (insn->prefixes.bytes[3])
 		return inat_get_last_prefix_id(insn->prefixes.bytes[3]);
diff --git a/arch/x86/include/asm/intel-family.h b/arch/x86/include/asm/intel-family.h
index e345dbdf933e..f32a0eca2ae5 100644
--- a/arch/x86/include/asm/intel-family.h
+++ b/arch/x86/include/asm/intel-family.h
@@ -51,7 +51,7 @@
 #define INTEL_PENTIUM_MMX		IFM(5, 0x04) /* P55C */
 #define INTEL_QUARK_X1000		IFM(5, 0x09) /* Quark X1000 SoC */
 
-/* Family 6 */
+/* Family 6, 18, 19 */
 #define INTEL_PENTIUM_PRO		IFM(6, 0x01)
 #define INTEL_PENTIUM_II_KLAMATH	IFM(6, 0x03)
 #define INTEL_PENTIUM_III_DESCHUTES	IFM(6, 0x05)
@@ -126,6 +126,8 @@
 #define INTEL_GRANITERAPIDS_X		IFM(6, 0xAD) /* Redwood Cove */
 #define INTEL_GRANITERAPIDS_D		IFM(6, 0xAE)
 
+#define INTEL_DIAMONDRAPIDS_X		IFM(19, 0x01) /* Panther Cove */
+
 #define INTEL_BARTLETTLAKE		IFM(6, 0xD7) /* Raptor Cove */
 
 /* "Hybrid" Processors (P-Core/E-Core) */
@@ -203,9 +205,6 @@
 #define INTEL_P4_PRESCOTT_2M		IFM(15, 0x04)
 #define INTEL_P4_CEDARMILL		IFM(15, 0x06) /* Also Xeon Dempsey */
 
-/* Family 19 */
-#define INTEL_PANTHERCOVE_X		IFM(19, 0x01) /* Diamond Rapids */
-
 /*
  * Intel CPU core types
  *
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index 6c77c03139f7..31e3cb550fb3 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -241,12 +241,14 @@ struct cper_ia_proc_ctx;
 
 #ifdef CONFIG_X86_MCE
 int mcheck_init(void);
+void mca_bsp_init(struct cpuinfo_x86 *c);
 void mcheck_cpu_init(struct cpuinfo_x86 *c);
 void mcheck_cpu_clear(struct cpuinfo_x86 *c);
 int apei_smca_report_x86_error(struct cper_ia_proc_ctx *ctx_info,
 			       u64 lapic_id);
 #else
 static inline int mcheck_init(void) { return 0; }
+static inline void mca_bsp_init(struct cpuinfo_x86 *c) {}
 static inline void mcheck_cpu_init(struct cpuinfo_x86 *c) {}
 static inline void mcheck_cpu_clear(struct cpuinfo_x86 *c) {}
 static inline int apei_smca_report_x86_error(struct cper_ia_proc_ctx *ctx_info,
@@ -290,8 +292,7 @@ DECLARE_PER_CPU(mce_banks_t, mce_poll_banks);
 enum mcp_flags {
 	MCP_TIMESTAMP	= BIT(0),	/* log time stamp */
 	MCP_UC		= BIT(1),	/* log uncorrected errors */
-	MCP_DONTLOG	= BIT(2),	/* only clear, don't log */
-	MCP_QUEUE_LOG	= BIT(3),	/* only queue to genpool */
+	MCP_QUEUE_LOG	= BIT(2),	/* only queue to genpool */
 };
 
 void machine_check_poll(enum mcp_flags flags, mce_banks_t *b);
@@ -371,15 +372,9 @@ enum smca_bank_types {
 
 extern bool amd_mce_is_memory_error(struct mce *m);
 
-extern int mce_threshold_create_device(unsigned int cpu);
-extern int mce_threshold_remove_device(unsigned int cpu);
-
 void mce_amd_feature_init(struct cpuinfo_x86 *c);
 enum smca_bank_types smca_get_bank_type(unsigned int cpu, unsigned int bank);
 #else
-
-static inline int mce_threshold_create_device(unsigned int cpu)		{ return 0; };
-static inline int mce_threshold_remove_device(unsigned int cpu)		{ return 0; };
 static inline bool amd_mce_is_memory_error(struct mce *m)		{ return false; };
 static inline void mce_amd_feature_init(struct cpuinfo_x86 *c)		{ }
 #endif
diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h
index b65c3ba5fa14..718a55d82fe4 100644
--- a/arch/x86/include/asm/msr-index.h
+++ b/arch/x86/include/asm/msr-index.h
@@ -315,12 +315,14 @@
 #define PERF_CAP_PT_IDX			16
 
 #define MSR_PEBS_LD_LAT_THRESHOLD	0x000003f6
-#define PERF_CAP_PEBS_TRAP             BIT_ULL(6)
-#define PERF_CAP_ARCH_REG              BIT_ULL(7)
-#define PERF_CAP_PEBS_FORMAT           0xf00
-#define PERF_CAP_PEBS_BASELINE         BIT_ULL(14)
-#define PERF_CAP_PEBS_MASK	(PERF_CAP_PEBS_TRAP | PERF_CAP_ARCH_REG | \
-				 PERF_CAP_PEBS_FORMAT | PERF_CAP_PEBS_BASELINE)
+#define PERF_CAP_PEBS_TRAP		BIT_ULL(6)
+#define PERF_CAP_ARCH_REG		BIT_ULL(7)
+#define PERF_CAP_PEBS_FORMAT		0xf00
+#define PERF_CAP_PEBS_BASELINE		BIT_ULL(14)
+#define PERF_CAP_PEBS_TIMING_INFO	BIT_ULL(17)
+#define PERF_CAP_PEBS_MASK		(PERF_CAP_PEBS_TRAP | PERF_CAP_ARCH_REG | \
+					 PERF_CAP_PEBS_FORMAT | PERF_CAP_PEBS_BASELINE | \
+					 PERF_CAP_PEBS_TIMING_INFO)
 
 #define MSR_IA32_RTIT_CTL		0x00000570
 #define RTIT_CTL_TRACEEN		BIT(0)
@@ -631,6 +633,11 @@
 #define MSR_AMD_PPIN			0xc00102f1
 #define MSR_AMD64_CPUID_FN_7		0xc0011002
 #define MSR_AMD64_CPUID_FN_1		0xc0011004
+
+#define MSR_AMD64_CPUID_EXT_FEAT	0xc0011005
+#define MSR_AMD64_CPUID_EXT_FEAT_TOPOEXT_BIT	54
+#define MSR_AMD64_CPUID_EXT_FEAT_TOPOEXT	BIT_ULL(MSR_AMD64_CPUID_EXT_FEAT_TOPOEXT_BIT)
+
 #define MSR_AMD64_LS_CFG		0xc0011020
 #define MSR_AMD64_DC_CFG		0xc0011022
 #define MSR_AMD64_TW_CFG		0xc0011023
@@ -699,8 +706,15 @@
 #define MSR_AMD64_SNP_VMSA_REG_PROT	BIT_ULL(MSR_AMD64_SNP_VMSA_REG_PROT_BIT)
 #define MSR_AMD64_SNP_SMT_PROT_BIT	17
 #define MSR_AMD64_SNP_SMT_PROT		BIT_ULL(MSR_AMD64_SNP_SMT_PROT_BIT)
-#define MSR_AMD64_SNP_RESV_BIT		18
+#define MSR_AMD64_SNP_SECURE_AVIC_BIT	18
+#define MSR_AMD64_SNP_SECURE_AVIC	BIT_ULL(MSR_AMD64_SNP_SECURE_AVIC_BIT)
+#define MSR_AMD64_SNP_RESV_BIT		19
 #define MSR_AMD64_SNP_RESERVED_MASK	GENMASK_ULL(63, MSR_AMD64_SNP_RESV_BIT)
+#define MSR_AMD64_SAVIC_CONTROL		0xc0010138
+#define MSR_AMD64_SAVIC_EN_BIT		0
+#define MSR_AMD64_SAVIC_EN		BIT_ULL(MSR_AMD64_SAVIC_EN_BIT)
+#define MSR_AMD64_SAVIC_ALLOWEDNMI_BIT	1
+#define MSR_AMD64_SAVIC_ALLOWEDNMI	BIT_ULL(MSR_AMD64_SAVIC_ALLOWEDNMI_BIT)
 #define MSR_AMD64_RMP_BASE		0xc0010132
 #define MSR_AMD64_RMP_END		0xc0010133
 #define MSR_AMD64_RMP_CFG		0xc0010136
@@ -1223,6 +1237,8 @@
 /* - AMD: */
 #define MSR_IA32_MBA_BW_BASE		0xc0000200
 #define MSR_IA32_SMBA_BW_BASE		0xc0000280
+#define MSR_IA32_L3_QOS_ABMC_CFG	0xc00003fd
+#define MSR_IA32_L3_QOS_EXT_CFG		0xc00003ff
 #define MSR_IA32_EVT_CFG_BASE		0xc0000400
 
 /* AMD-V MSRs */
diff --git a/arch/x86/include/asm/nospec-branch.h b/arch/x86/include/asm/nospec-branch.h
index 10f261678749..08ed5a2e46a5 100644
--- a/arch/x86/include/asm/nospec-branch.h
+++ b/arch/x86/include/asm/nospec-branch.h
@@ -514,6 +514,7 @@ enum spectre_v2_user_mitigation {
 /* The Speculative Store Bypass disable variants */
 enum ssb_mitigation {
 	SPEC_STORE_BYPASS_NONE,
+	SPEC_STORE_BYPASS_AUTO,
 	SPEC_STORE_BYPASS_DISABLE,
 	SPEC_STORE_BYPASS_PRCTL,
 	SPEC_STORE_BYPASS_SECCOMP,
@@ -530,6 +531,8 @@ void alternative_msr_write(unsigned int msr, u64 val, unsigned int feature)
 		: "memory");
 }
 
+DECLARE_PER_CPU(bool, x86_ibpb_exit_to_user);
+
 static inline void indirect_branch_prediction_barrier(void)
 {
 	asm_inline volatile(ALTERNATIVE("", "call write_ibpb", X86_FEATURE_IBPB)
diff --git a/arch/x86/include/asm/perf_event.h b/arch/x86/include/asm/perf_event.h
index 70d1d94aca7e..49a4d442f3fc 100644
--- a/arch/x86/include/asm/perf_event.h
+++ b/arch/x86/include/asm/perf_event.h
@@ -35,7 +35,6 @@
 #define ARCH_PERFMON_EVENTSEL_EQ			(1ULL << 36)
 #define ARCH_PERFMON_EVENTSEL_UMASK2			(0xFFULL << 40)
 
-#define INTEL_FIXED_BITS_MASK				0xFULL
 #define INTEL_FIXED_BITS_STRIDE			4
 #define INTEL_FIXED_0_KERNEL				(1ULL << 0)
 #define INTEL_FIXED_0_USER				(1ULL << 1)
@@ -48,6 +47,11 @@
 #define ICL_EVENTSEL_ADAPTIVE				(1ULL << 34)
 #define ICL_FIXED_0_ADAPTIVE				(1ULL << 32)
 
+#define INTEL_FIXED_BITS_MASK					\
+	(INTEL_FIXED_0_KERNEL | INTEL_FIXED_0_USER |		\
+	 INTEL_FIXED_0_ANYTHREAD | INTEL_FIXED_0_ENABLE_PMI |	\
+	 ICL_FIXED_0_ADAPTIVE)
+
 #define intel_fixed_bits_by_idx(_idx, _bits)			\
 	((_bits) << ((_idx) * INTEL_FIXED_BITS_STRIDE))
 
@@ -430,7 +434,7 @@ static inline bool is_topdown_idx(int idx)
 #define GLOBAL_STATUS_TRACE_TOPAPMI		BIT_ULL(GLOBAL_STATUS_TRACE_TOPAPMI_BIT)
 #define GLOBAL_STATUS_PERF_METRICS_OVF_BIT	48
 
-#define GLOBAL_CTRL_EN_PERF_METRICS		48
+#define GLOBAL_CTRL_EN_PERF_METRICS		BIT_ULL(48)
 /*
  * We model guest LBR event tracing as another fixed-mode PMC like BTS.
  *
diff --git a/arch/x86/include/asm/pgtable_64_types.h b/arch/x86/include/asm/pgtable_64_types.h
index 4604f924d8b8..7eb61ef6a185 100644
--- a/arch/x86/include/asm/pgtable_64_types.h
+++ b/arch/x86/include/asm/pgtable_64_types.h
@@ -36,6 +36,9 @@ static inline bool pgtable_l5_enabled(void)
 #define pgtable_l5_enabled() cpu_feature_enabled(X86_FEATURE_LA57)
 #endif /* USE_EARLY_PGTABLE_L5 */
 
+#define ARCH_PAGE_TABLE_SYNC_MASK \
+	(pgtable_l5_enabled() ? PGTBL_PGD_MODIFIED : PGTBL_P4D_MODIFIED)
+
 extern unsigned int pgdir_shift;
 extern unsigned int ptrs_per_p4d;
 
diff --git a/arch/x86/include/asm/resctrl.h b/arch/x86/include/asm/resctrl.h
index feb93b50e990..575f8408a9e7 100644
--- a/arch/x86/include/asm/resctrl.h
+++ b/arch/x86/include/asm/resctrl.h
@@ -44,7 +44,6 @@ DECLARE_PER_CPU(struct resctrl_pqr_state, pqr_state);
 
 extern bool rdt_alloc_capable;
 extern bool rdt_mon_capable;
-extern unsigned int rdt_mon_features;
 
 DECLARE_STATIC_KEY_FALSE(rdt_enable_key);
 DECLARE_STATIC_KEY_FALSE(rdt_alloc_enable_key);
@@ -84,21 +83,6 @@ static inline void resctrl_arch_disable_mon(void)
 	static_branch_dec_cpuslocked(&rdt_enable_key);
 }
 
-static inline bool resctrl_arch_is_llc_occupancy_enabled(void)
-{
-	return (rdt_mon_features & (1 << QOS_L3_OCCUP_EVENT_ID));
-}
-
-static inline bool resctrl_arch_is_mbm_total_enabled(void)
-{
-	return (rdt_mon_features & (1 << QOS_L3_MBM_TOTAL_EVENT_ID));
-}
-
-static inline bool resctrl_arch_is_mbm_local_enabled(void)
-{
-	return (rdt_mon_features & (1 << QOS_L3_MBM_LOCAL_EVENT_ID));
-}
-
 /*
  * __resctrl_sched_in() - Writes the task's CLOSid/RMID to IA32_PQR_MSR
  *
diff --git a/arch/x86/include/asm/segment.h b/arch/x86/include/asm/segment.h
index 77d8f49b92bd..f59ae7186940 100644
--- a/arch/x86/include/asm/segment.h
+++ b/arch/x86/include/asm/segment.h
@@ -244,7 +244,7 @@ static inline unsigned long vdso_encode_cpunode(int cpu, unsigned long node)
 
 static inline void vdso_read_cpunode(unsigned *cpu, unsigned *node)
 {
-	unsigned int p;
+	unsigned long p;
 
 	/*
 	 * Load CPU and node number from the GDT.  LSL is faster than RDTSCP
@@ -254,10 +254,10 @@ static inline void vdso_read_cpunode(unsigned *cpu, unsigned *node)
 	 *
 	 * If RDPID is available, use it.
 	 */
-	alternative_io ("lsl %[seg],%[p]",
-			".byte 0xf3,0x0f,0xc7,0xf8", /* RDPID %eax/rax */
+	alternative_io ("lsl %[seg],%k[p]",
+			"rdpid %[p]",
 			X86_FEATURE_RDPID,
-			[p] "=a" (p), [seg] "r" (__CPUNODE_SEG));
+			[p] "=r" (p), [seg] "r" (__CPUNODE_SEG));
 
 	if (cpu)
 		*cpu = (p & VDSO_CPUNODE_MASK);
diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h
index 692af46603a1..914eb32581c7 100644
--- a/arch/x86/include/asm/setup.h
+++ b/arch/x86/include/asm/setup.h
@@ -53,6 +53,7 @@ extern void i386_reserve_resources(void);
 extern unsigned long __startup_64(unsigned long p2v_offset, struct boot_params *bp);
 extern void startup_64_setup_gdt_idt(void);
 extern void startup_64_load_idt(void *vc_handler);
+extern void __pi_startup_64_load_idt(void *vc_handler);
 extern void early_setup_idt(void);
 extern void __init do_early_exception(struct pt_regs *regs, int trapnr);
 
diff --git a/arch/x86/include/asm/sev-common.h b/arch/x86/include/asm/sev-common.h
index 0020d77a0800..01a6e4dbe423 100644
--- a/arch/x86/include/asm/sev-common.h
+++ b/arch/x86/include/asm/sev-common.h
@@ -208,6 +208,7 @@ struct snp_psc_desc {
 #define GHCB_TERM_SVSM_CAA		9	/* SVSM is present but CAA is not page aligned */
 #define GHCB_TERM_SECURE_TSC		10	/* Secure TSC initialization failed */
 #define GHCB_TERM_SVSM_CA_REMAP_FAIL	11	/* SVSM is present but CA could not be remapped */
+#define GHCB_TERM_SAVIC_FAIL		12	/* Secure AVIC-specific failure */
 
 #define GHCB_RESP_CODE(v)		((v) & GHCB_MSR_INFO_MASK)
 
diff --git a/arch/x86/include/asm/sev-internal.h b/arch/x86/include/asm/sev-internal.h
index 3dfd306d1c9e..c58c47c68ab6 100644
--- a/arch/x86/include/asm/sev-internal.h
+++ b/arch/x86/include/asm/sev-internal.h
@@ -2,7 +2,6 @@
 
 #define DR7_RESET_VALUE        0x400
 
-extern struct ghcb boot_ghcb_page;
 extern u64 sev_hv_features;
 extern u64 sev_secrets_pa;
 
@@ -56,31 +55,15 @@ DECLARE_PER_CPU(struct sev_es_runtime_data*, runtime_data);
 DECLARE_PER_CPU(struct sev_es_save_area *, sev_vmsa);
 
 void early_set_pages_state(unsigned long vaddr, unsigned long paddr,
-			   unsigned long npages, enum psc_op op);
+			   unsigned long npages, const struct psc_desc *desc);
 
 DECLARE_PER_CPU(struct svsm_ca *, svsm_caa);
 DECLARE_PER_CPU(u64, svsm_caa_pa);
 
-extern struct svsm_ca *boot_svsm_caa;
 extern u64 boot_svsm_caa_pa;
 
-static __always_inline struct svsm_ca *svsm_get_caa(void)
-{
-	if (sev_cfg.use_cas)
-		return this_cpu_read(svsm_caa);
-	else
-		return boot_svsm_caa;
-}
-
-static __always_inline u64 svsm_get_caa_pa(void)
-{
-	if (sev_cfg.use_cas)
-		return this_cpu_read(svsm_caa_pa);
-	else
-		return boot_svsm_caa_pa;
-}
-
-int svsm_perform_call_protocol(struct svsm_call *call);
+enum es_result verify_exception_info(struct ghcb *ghcb, struct es_em_ctxt *ctxt);
+void vc_forward_exception(struct es_em_ctxt *ctxt);
 
 static inline u64 sev_es_rd_ghcb_msr(void)
 {
@@ -97,9 +80,8 @@ static __always_inline void sev_es_wr_ghcb_msr(u64 val)
 	native_wrmsr(MSR_AMD64_SEV_ES_GHCB, low, high);
 }
 
-void snp_register_ghcb_early(unsigned long paddr);
-bool sev_es_negotiate_protocol(void);
-bool sev_es_check_cpu_features(void);
+enum es_result sev_es_ghcb_handle_msr(struct ghcb *ghcb, struct es_em_ctxt *ctxt, bool write);
+
 u64 get_hv_features(void);
 
 const struct snp_cpuid_table *snp_cpuid_get_table(void);
diff --git a/arch/x86/include/asm/sev.h b/arch/x86/include/asm/sev.h
index 89075ff19afa..f9046c4b9a2b 100644
--- a/arch/x86/include/asm/sev.h
+++ b/arch/x86/include/asm/sev.h
@@ -503,6 +503,7 @@ static inline int pvalidate(unsigned long vaddr, bool rmp_psize, bool validate)
 }
 
 void setup_ghcb(void);
+void snp_register_ghcb_early(unsigned long paddr);
 void early_snp_set_memory_private(unsigned long vaddr, unsigned long paddr,
 				  unsigned long npages);
 void early_snp_set_memory_shared(unsigned long vaddr, unsigned long paddr,
@@ -511,14 +512,12 @@ void snp_set_memory_shared(unsigned long vaddr, unsigned long npages);
 void snp_set_memory_private(unsigned long vaddr, unsigned long npages);
 void snp_set_wakeup_secondary_cpu(void);
 bool snp_init(struct boot_params *bp);
-void __noreturn snp_abort(void);
 void snp_dmi_setup(void);
 int snp_issue_svsm_attest_req(u64 call_id, struct svsm_call *call, struct svsm_attest_call *input);
 void snp_accept_memory(phys_addr_t start, phys_addr_t end);
 u64 snp_get_unsupported_features(u64 status);
 u64 sev_get_status(void);
 void sev_show_status(void);
-void snp_update_svsm_ca(void);
 int prepare_pte_enc(struct pte_enc_desc *d);
 void set_pte_enc_mask(pte_t *kpte, unsigned long pfn, pgprot_t new_prot);
 void snp_kexec_finish(void);
@@ -533,6 +532,10 @@ int snp_svsm_vtpm_send_command(u8 *buffer);
 
 void __init snp_secure_tsc_prepare(void);
 void __init snp_secure_tsc_init(void);
+enum es_result savic_register_gpa(u64 gpa);
+enum es_result savic_unregister_gpa(u64 *gpa);
+u64 savic_ghcb_msr_read(u32 reg);
+void savic_ghcb_msr_write(u32 reg, u64 value);
 
 static __always_inline void vc_ghcb_invalidate(struct ghcb *ghcb)
 {
@@ -540,8 +543,6 @@ static __always_inline void vc_ghcb_invalidate(struct ghcb *ghcb)
 	__builtin_memset(ghcb->save.valid_bitmap, 0, sizeof(ghcb->save.valid_bitmap));
 }
 
-void vc_forward_exception(struct es_em_ctxt *ctxt);
-
 /* I/O parameters for CPUID-related helpers */
 struct cpuid_leaf {
 	u32 fn;
@@ -552,7 +553,13 @@ struct cpuid_leaf {
 	u32 edx;
 };
 
-int snp_cpuid(struct ghcb *ghcb, struct es_em_ctxt *ctxt, struct cpuid_leaf *leaf);
+int svsm_perform_msr_protocol(struct svsm_call *call);
+int __pi_svsm_perform_msr_protocol(struct svsm_call *call);
+int snp_cpuid(void (*cpuid_fn)(void *ctx, struct cpuid_leaf *leaf),
+	      void *ctx, struct cpuid_leaf *leaf);
+
+void svsm_issue_call(struct svsm_call *call, u8 *pending);
+int svsm_process_result_codes(struct svsm_call *call);
 
 void __noreturn sev_es_terminate(unsigned int set, unsigned int reason);
 enum es_result sev_es_ghcb_hv_call(struct ghcb *ghcb,
@@ -560,7 +567,36 @@ enum es_result sev_es_ghcb_hv_call(struct ghcb *ghcb,
 				   u64 exit_code, u64 exit_info_1,
 				   u64 exit_info_2);
 
+bool sev_es_negotiate_protocol(void);
+bool sev_es_check_cpu_features(void);
+
+extern u16 ghcb_version;
 extern struct ghcb *boot_ghcb;
+extern bool sev_snp_needs_sfw;
+
+struct psc_desc {
+	enum psc_op op;
+	struct svsm_ca *ca;
+	u64 caa_pa;
+};
+
+static inline void sev_evict_cache(void *va, int npages)
+{
+	volatile u8 val __always_unused;
+	u8 *bytes = va;
+	int page_idx;
+
+	/*
+	 * For SEV guests, a read from the first/last cache-lines of a 4K page
+	 * using the guest key is sufficient to cause a flush of all cache-lines
+	 * associated with that 4K page without incurring all the overhead of a
+	 * full CLFLUSH sequence.
+	 */
+	for (page_idx = 0; page_idx < npages; page_idx++) {
+		val = bytes[page_idx * PAGE_SIZE];
+		val = bytes[page_idx * PAGE_SIZE + PAGE_SIZE - 1];
+	}
+}
 
 #else	/* !CONFIG_AMD_MEM_ENCRYPT */
 
@@ -582,7 +618,6 @@ static inline void snp_set_memory_shared(unsigned long vaddr, unsigned long npag
 static inline void snp_set_memory_private(unsigned long vaddr, unsigned long npages) { }
 static inline void snp_set_wakeup_secondary_cpu(void) { }
 static inline bool snp_init(struct boot_params *bp) { return false; }
-static inline void snp_abort(void) { }
 static inline void snp_dmi_setup(void) { }
 static inline int snp_issue_svsm_attest_req(u64 call_id, struct svsm_call *call, struct svsm_attest_call *input)
 {
@@ -592,7 +627,6 @@ static inline void snp_accept_memory(phys_addr_t start, phys_addr_t end) { }
 static inline u64 snp_get_unsupported_features(u64 status) { return 0; }
 static inline u64 sev_get_status(void) { return 0; }
 static inline void sev_show_status(void) { }
-static inline void snp_update_svsm_ca(void) { }
 static inline int prepare_pte_enc(struct pte_enc_desc *d) { return 0; }
 static inline void set_pte_enc_mask(pte_t *kpte, unsigned long pfn, pgprot_t new_prot) { }
 static inline void snp_kexec_finish(void) { }
@@ -605,6 +639,11 @@ static inline int snp_send_guest_request(struct snp_msg_desc *mdesc,
 static inline int snp_svsm_vtpm_send_command(u8 *buffer) { return -ENODEV; }
 static inline void __init snp_secure_tsc_prepare(void) { }
 static inline void __init snp_secure_tsc_init(void) { }
+static inline void sev_evict_cache(void *va, int npages) {}
+static inline enum es_result savic_register_gpa(u64 gpa) { return ES_UNSUPPORTED; }
+static inline enum es_result savic_unregister_gpa(u64 *gpa) { return ES_UNSUPPORTED; }
+static inline void savic_ghcb_msr_write(u32 reg, u64 value) { }
+static inline u64 savic_ghcb_msr_read(u32 reg) { return 0; }
 
 #endif	/* CONFIG_AMD_MEM_ENCRYPT */
 
@@ -616,9 +655,13 @@ void snp_dump_hva_rmpentry(unsigned long address);
 int psmash(u64 pfn);
 int rmp_make_private(u64 pfn, u64 gpa, enum pg_level level, u32 asid, bool immutable);
 int rmp_make_shared(u64 pfn, enum pg_level level);
-void snp_leak_pages(u64 pfn, unsigned int npages);
+void __snp_leak_pages(u64 pfn, unsigned int npages, bool dump_rmp);
 void kdump_sev_callback(void);
 void snp_fixup_e820_tables(void);
+static inline void snp_leak_pages(u64 pfn, unsigned int pages)
+{
+	__snp_leak_pages(pfn, pages, true);
+}
 #else
 static inline bool snp_probe_rmptable_info(void) { return false; }
 static inline int snp_rmptable_init(void) { return -ENOSYS; }
@@ -631,6 +674,7 @@ static inline int rmp_make_private(u64 pfn, u64 gpa, enum pg_level level, u32 as
 	return -ENODEV;
 }
 static inline int rmp_make_shared(u64 pfn, enum pg_level level) { return -ENODEV; }
+static inline void __snp_leak_pages(u64 pfn, unsigned int npages, bool dump_rmp) {}
 static inline void snp_leak_pages(u64 pfn, unsigned int npages) {}
 static inline void kdump_sev_callback(void) { }
 static inline void snp_fixup_e820_tables(void) {}
diff --git a/arch/x86/include/asm/shstk.h b/arch/x86/include/asm/shstk.h
index ba6f2fe43848..fc7dcec58fd4 100644
--- a/arch/x86/include/asm/shstk.h
+++ b/arch/x86/include/asm/shstk.h
@@ -16,25 +16,29 @@ struct thread_shstk {
 
 long shstk_prctl(struct task_struct *task, int option, unsigned long arg2);
 void reset_thread_features(void);
-unsigned long shstk_alloc_thread_stack(struct task_struct *p, unsigned long clone_flags,
+unsigned long shstk_alloc_thread_stack(struct task_struct *p, u64 clone_flags,
 				       unsigned long stack_size);
 void shstk_free(struct task_struct *p);
 int setup_signal_shadow_stack(struct ksignal *ksig);
 int restore_signal_shadow_stack(void);
 int shstk_update_last_frame(unsigned long val);
 bool shstk_is_enabled(void);
+int shstk_pop(u64 *val);
+int shstk_push(u64 val);
 #else
 static inline long shstk_prctl(struct task_struct *task, int option,
 			       unsigned long arg2) { return -EINVAL; }
 static inline void reset_thread_features(void) {}
 static inline unsigned long shstk_alloc_thread_stack(struct task_struct *p,
-						     unsigned long clone_flags,
+						     u64 clone_flags,
 						     unsigned long stack_size) { return 0; }
 static inline void shstk_free(struct task_struct *p) {}
 static inline int setup_signal_shadow_stack(struct ksignal *ksig) { return 0; }
 static inline int restore_signal_shadow_stack(void) { return 0; }
 static inline int shstk_update_last_frame(unsigned long val) { return 0; }
 static inline bool shstk_is_enabled(void) { return false; }
+static inline int shstk_pop(u64 *val) { return -ENOTSUPP; }
+static inline int shstk_push(u64 val) { return -ENOTSUPP; }
 #endif /* CONFIG_X86_USER_SHADOW_STACK */
 
 #endif /* __ASSEMBLER__ */
diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h
index 9282465eea21..e71e0e8362ed 100644
--- a/arch/x86/include/asm/thread_info.h
+++ b/arch/x86/include/asm/thread_info.h
@@ -80,56 +80,42 @@ struct thread_info {
 #endif
 
 /*
- * thread information flags
- * - these are process state flags that various assembly files
- *   may need to access
+ * Tell the generic TIF infrastructure which bits x86 supports
  */
-#define TIF_NOTIFY_RESUME	1	/* callback before returning to user */
-#define TIF_SIGPENDING		2	/* signal pending */
-#define TIF_NEED_RESCHED	3	/* rescheduling necessary */
-#define TIF_NEED_RESCHED_LAZY	4	/* Lazy rescheduling needed */
-#define TIF_SINGLESTEP		5	/* reenable singlestep on user return*/
-#define TIF_SSBD		6	/* Speculative store bypass disable */
-#define TIF_SPEC_IB		9	/* Indirect branch speculation mitigation */
-#define TIF_SPEC_L1D_FLUSH	10	/* Flush L1D on mm switches (processes) */
-#define TIF_USER_RETURN_NOTIFY	11	/* notify kernel of userspace return */
-#define TIF_UPROBE		12	/* breakpointed or singlestepping */
-#define TIF_PATCH_PENDING	13	/* pending live patching update */
-#define TIF_NEED_FPU_LOAD	14	/* load FPU on return to userspace */
-#define TIF_NOCPUID		15	/* CPUID is not accessible in userland */
-#define TIF_NOTSC		16	/* TSC is not accessible in userland */
-#define TIF_NOTIFY_SIGNAL	17	/* signal notifications exist */
-#define TIF_MEMDIE		20	/* is terminating due to OOM killer */
-#define TIF_POLLING_NRFLAG	21	/* idle is polling for TIF_NEED_RESCHED */
+#define HAVE_TIF_NEED_RESCHED_LAZY
+#define HAVE_TIF_POLLING_NRFLAG
+#define HAVE_TIF_SINGLESTEP
+
+#include <asm-generic/thread_info_tif.h>
+
+/* Architecture specific TIF space starts at 16 */
+#define TIF_SSBD		16	/* Speculative store bypass disable */
+#define TIF_SPEC_IB		17	/* Indirect branch speculation mitigation */
+#define TIF_SPEC_L1D_FLUSH	18	/* Flush L1D on mm switches (processes) */
+#define TIF_NEED_FPU_LOAD	19	/* load FPU on return to userspace */
+#define TIF_NOCPUID		20	/* CPUID is not accessible in userland */
+#define TIF_NOTSC		21	/* TSC is not accessible in userland */
 #define TIF_IO_BITMAP		22	/* uses I/O bitmap */
 #define TIF_SPEC_FORCE_UPDATE	23	/* Force speculation MSR update in context switch */
 #define TIF_FORCED_TF		24	/* true if TF in eflags artificially */
-#define TIF_BLOCKSTEP		25	/* set when we want DEBUGCTLMSR_BTF */
+#define TIF_SINGLESTEP		25	/* reenable singlestep on user return*/
+#define TIF_BLOCKSTEP		26	/* set when we want DEBUGCTLMSR_BTF */
 #define TIF_LAZY_MMU_UPDATES	27	/* task is updating the mmu lazily */
-#define TIF_ADDR32		29	/* 32-bit address space on 64 bits */
-
-#define _TIF_NOTIFY_RESUME	(1 << TIF_NOTIFY_RESUME)
-#define _TIF_SIGPENDING		(1 << TIF_SIGPENDING)
-#define _TIF_NEED_RESCHED	(1 << TIF_NEED_RESCHED)
-#define _TIF_NEED_RESCHED_LAZY	(1 << TIF_NEED_RESCHED_LAZY)
-#define _TIF_SINGLESTEP		(1 << TIF_SINGLESTEP)
-#define _TIF_SSBD		(1 << TIF_SSBD)
-#define _TIF_SPEC_IB		(1 << TIF_SPEC_IB)
-#define _TIF_SPEC_L1D_FLUSH	(1 << TIF_SPEC_L1D_FLUSH)
-#define _TIF_USER_RETURN_NOTIFY	(1 << TIF_USER_RETURN_NOTIFY)
-#define _TIF_UPROBE		(1 << TIF_UPROBE)
-#define _TIF_PATCH_PENDING	(1 << TIF_PATCH_PENDING)
-#define _TIF_NEED_FPU_LOAD	(1 << TIF_NEED_FPU_LOAD)
-#define _TIF_NOCPUID		(1 << TIF_NOCPUID)
-#define _TIF_NOTSC		(1 << TIF_NOTSC)
-#define _TIF_NOTIFY_SIGNAL	(1 << TIF_NOTIFY_SIGNAL)
-#define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
-#define _TIF_IO_BITMAP		(1 << TIF_IO_BITMAP)
-#define _TIF_SPEC_FORCE_UPDATE	(1 << TIF_SPEC_FORCE_UPDATE)
-#define _TIF_FORCED_TF		(1 << TIF_FORCED_TF)
-#define _TIF_BLOCKSTEP		(1 << TIF_BLOCKSTEP)
-#define _TIF_LAZY_MMU_UPDATES	(1 << TIF_LAZY_MMU_UPDATES)
-#define _TIF_ADDR32		(1 << TIF_ADDR32)
+#define TIF_ADDR32		28	/* 32-bit address space on 64 bits */
+
+#define _TIF_SSBD		BIT(TIF_SSBD)
+#define _TIF_SPEC_IB		BIT(TIF_SPEC_IB)
+#define _TIF_SPEC_L1D_FLUSH	BIT(TIF_SPEC_L1D_FLUSH)
+#define _TIF_NEED_FPU_LOAD	BIT(TIF_NEED_FPU_LOAD)
+#define _TIF_NOCPUID		BIT(TIF_NOCPUID)
+#define _TIF_NOTSC		BIT(TIF_NOTSC)
+#define _TIF_IO_BITMAP		BIT(TIF_IO_BITMAP)
+#define _TIF_SPEC_FORCE_UPDATE	BIT(TIF_SPEC_FORCE_UPDATE)
+#define _TIF_FORCED_TF		BIT(TIF_FORCED_TF)
+#define _TIF_BLOCKSTEP		BIT(TIF_BLOCKSTEP)
+#define _TIF_SINGLESTEP		BIT(TIF_SINGLESTEP)
+#define _TIF_LAZY_MMU_UPDATES	BIT(TIF_LAZY_MMU_UPDATES)
+#define _TIF_ADDR32		BIT(TIF_ADDR32)
 
 /* flags to check in __switch_to() */
 #define _TIF_WORK_CTXSW_BASE					\
diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h
index 6c79ee7c0957..21041898157a 100644
--- a/arch/x86/include/asm/topology.h
+++ b/arch/x86/include/asm/topology.h
@@ -231,6 +231,16 @@ static inline bool topology_is_primary_thread(unsigned int cpu)
 }
 #define topology_is_primary_thread topology_is_primary_thread
 
+int topology_get_primary_thread(unsigned int cpu);
+
+static inline bool topology_is_core_online(unsigned int cpu)
+{
+	int pcpu = topology_get_primary_thread(cpu);
+
+	return pcpu >= 0 ? cpu_online(pcpu) : false;
+}
+#define topology_is_core_online topology_is_core_online
+
 #else /* CONFIG_SMP */
 static inline int topology_phys_to_logical_pkg(unsigned int pkg) { return 0; }
 static inline int topology_max_smt_threads(void) { return 1; }
diff --git a/arch/x86/include/asm/uprobes.h b/arch/x86/include/asm/uprobes.h
index 678fb546f0a7..1ee2e5115955 100644
--- a/arch/x86/include/asm/uprobes.h
+++ b/arch/x86/include/asm/uprobes.h
@@ -20,6 +20,11 @@ typedef u8 uprobe_opcode_t;
 #define UPROBE_SWBP_INSN		0xcc
 #define UPROBE_SWBP_INSN_SIZE		   1
 
+enum {
+	ARCH_UPROBE_FLAG_CAN_OPTIMIZE   = 0,
+	ARCH_UPROBE_FLAG_OPTIMIZE_FAIL  = 1,
+};
+
 struct uprobe_xol_ops;
 
 struct arch_uprobe {
@@ -45,6 +50,8 @@ struct arch_uprobe {
 			u8	ilen;
 		}			push;
 	};
+
+	unsigned long flags;
 };
 
 struct arch_uprobe_task {
diff --git a/arch/x86/include/asm/xen/hypercall.h b/arch/x86/include/asm/xen/hypercall.h
index 59a62c3780a2..a16d4631547c 100644
--- a/arch/x86/include/asm/xen/hypercall.h
+++ b/arch/x86/include/asm/xen/hypercall.h
@@ -94,12 +94,13 @@ DECLARE_STATIC_CALL(xen_hypercall, xen_hypercall_func);
 #ifdef MODULE
 #define __ADDRESSABLE_xen_hypercall
 #else
-#define __ADDRESSABLE_xen_hypercall __ADDRESSABLE_ASM_STR(__SCK__xen_hypercall)
+#define __ADDRESSABLE_xen_hypercall \
+	__stringify(.global STATIC_CALL_KEY(xen_hypercall);)
 #endif
 
 #define __HYPERCALL					\
 	__ADDRESSABLE_xen_hypercall			\
-	"call __SCT__xen_hypercall"
+	__stringify(call STATIC_CALL_TRAMP(xen_hypercall))
 
 #define __HYPERCALL_ENTRY(x)	"a" (x)
 
diff --git a/arch/x86/include/asm/xen/page.h b/arch/x86/include/asm/xen/page.h
index 85e63d58c074..59f642a94b9d 100644
--- a/arch/x86/include/asm/xen/page.h
+++ b/arch/x86/include/asm/xen/page.h
@@ -12,9 +12,9 @@
 #include <asm/extable.h>
 #include <asm/page.h>
 
+#include <xen/xen.h>
 #include <xen/interface/xen.h>
 #include <xen/interface/grant_table.h>
-#include <xen/features.h>
 
 /* Xen machine address */
 typedef struct xmaddr {
@@ -162,7 +162,7 @@ static inline unsigned long pfn_to_mfn(unsigned long pfn)
 	 * pfn_to_mfn. This will have to be removed when we figured
 	 * out which call.
 	 */
-	if (xen_feature(XENFEAT_auto_translated_physmap))
+	if (!xen_pv_domain())
 		return pfn;
 
 	mfn = __pfn_to_mfn(pfn);
@@ -175,7 +175,7 @@ static inline unsigned long pfn_to_mfn(unsigned long pfn)
 
 static inline int phys_to_machine_mapping_valid(unsigned long pfn)
 {
-	if (xen_feature(XENFEAT_auto_translated_physmap))
+	if (!xen_pv_domain())
 		return 1;
 
 	return __pfn_to_mfn(pfn) != INVALID_P2M_ENTRY;
@@ -210,7 +210,7 @@ static inline unsigned long mfn_to_pfn(unsigned long mfn)
 	 * gfn_to_pfn. This will have to be removed when we figure
 	 * out which call.
 	 */
-	if (xen_feature(XENFEAT_auto_translated_physmap))
+	if (!xen_pv_domain())
 		return mfn;
 
 	pfn = mfn_to_pfn_no_overrides(mfn);
@@ -242,7 +242,7 @@ static inline xpaddr_t machine_to_phys(xmaddr_t machine)
 /* Pseudo-physical <-> Guest conversion */
 static inline unsigned long pfn_to_gfn(unsigned long pfn)
 {
-	if (xen_feature(XENFEAT_auto_translated_physmap))
+	if (!xen_pv_domain())
 		return pfn;
 	else
 		return pfn_to_mfn(pfn);
@@ -250,7 +250,7 @@ static inline unsigned long pfn_to_gfn(unsigned long pfn)
 
 static inline unsigned long gfn_to_pfn(unsigned long gfn)
 {
-	if (xen_feature(XENFEAT_auto_translated_physmap))
+	if (!xen_pv_domain())
 		return gfn;
 	else
 		return mfn_to_pfn(gfn);
@@ -284,7 +284,7 @@ static inline unsigned long bfn_to_local_pfn(unsigned long mfn)
 {
 	unsigned long pfn;
 
-	if (xen_feature(XENFEAT_auto_translated_physmap))
+	if (!xen_pv_domain())
 		return mfn;
 
 	pfn = mfn_to_pfn(mfn);
diff --git a/arch/x86/include/uapi/asm/svm.h b/arch/x86/include/uapi/asm/svm.h
index 9c640a521a67..650e3256ea7d 100644
--- a/arch/x86/include/uapi/asm/svm.h
+++ b/arch/x86/include/uapi/asm/svm.h
@@ -118,6 +118,10 @@
 #define SVM_VMGEXIT_AP_CREATE			1
 #define SVM_VMGEXIT_AP_DESTROY			2
 #define SVM_VMGEXIT_SNP_RUN_VMPL		0x80000018
+#define SVM_VMGEXIT_SAVIC			0x8000001a
+#define SVM_VMGEXIT_SAVIC_REGISTER_GPA		0
+#define SVM_VMGEXIT_SAVIC_UNREGISTER_GPA	1
+#define SVM_VMGEXIT_SAVIC_SELF_GPA		~0ULL
 #define SVM_VMGEXIT_HV_FEATURES			0x8000fffd
 #define SVM_VMGEXIT_TERM_REQUEST		0x8000fffe
 #define SVM_VMGEXIT_TERM_REASON(reason_set, reason_code)	\
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 0d2a6d953be9..bc184dd38d99 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -148,7 +148,7 @@ obj-$(CONFIG_UNWINDER_ORC)		+= unwind_orc.o
 obj-$(CONFIG_UNWINDER_FRAME_POINTER)	+= unwind_frame.o
 obj-$(CONFIG_UNWINDER_GUESS)		+= unwind_guess.o
 
-obj-$(CONFIG_CFI_CLANG)			+= cfi.o
+obj-$(CONFIG_CFI)			+= cfi.o
 
 obj-$(CONFIG_CALL_THUNKS)		+= callthunks.o
 
diff --git a/arch/x86/kernel/alternative.c b/arch/x86/kernel/alternative.c
index 7bde68247b5f..79ae9cb50019 100644
--- a/arch/x86/kernel/alternative.c
+++ b/arch/x86/kernel/alternative.c
@@ -1170,7 +1170,7 @@ void __init_or_module apply_seal_endbr(s32 *start, s32 *end) { }
 
 #ifdef CONFIG_CFI_AUTO_DEFAULT
 # define __CFI_DEFAULT CFI_AUTO
-#elif defined(CONFIG_CFI_CLANG)
+#elif defined(CONFIG_CFI)
 # define __CFI_DEFAULT CFI_KCFI
 #else
 # define __CFI_DEFAULT CFI_OFF
@@ -1182,7 +1182,7 @@ enum cfi_mode cfi_mode __ro_after_init = __CFI_DEFAULT;
 bool cfi_bhi __ro_after_init = false;
 #endif
 
-#ifdef CONFIG_CFI_CLANG
+#ifdef CONFIG_CFI
 u32 cfi_get_func_hash(void *func)
 {
 	u32 hash;
diff --git a/arch/x86/kernel/apic/Makefile b/arch/x86/kernel/apic/Makefile
index 52d1808ee360..581db89477f9 100644
--- a/arch/x86/kernel/apic/Makefile
+++ b/arch/x86/kernel/apic/Makefile
@@ -18,6 +18,7 @@ ifeq ($(CONFIG_X86_64),y)
 # APIC probe will depend on the listing order here
 obj-$(CONFIG_X86_NUMACHIP)	+= apic_numachip.o
 obj-$(CONFIG_X86_UV)		+= x2apic_uv_x.o
+obj-$(CONFIG_AMD_SECURE_AVIC)	+= x2apic_savic.o
 obj-$(CONFIG_X86_X2APIC)	+= x2apic_phys.o
 obj-$(CONFIG_X86_X2APIC)	+= x2apic_cluster.o
 obj-y				+= apic_flat_64.o
diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c
index d73ba5a7b623..680d305589a3 100644
--- a/arch/x86/kernel/apic/apic.c
+++ b/arch/x86/kernel/apic/apic.c
@@ -592,6 +592,8 @@ static void setup_APIC_timer(void)
 						0xF, ~0UL);
 	} else
 		clockevents_register_device(levt);
+
+	apic_update_vector(smp_processor_id(), LOCAL_TIMER_VECTOR, true);
 }
 
 /*
@@ -1168,6 +1170,9 @@ void disable_local_APIC(void)
 	if (!apic_accessible())
 		return;
 
+	if (apic->teardown)
+		apic->teardown();
+
 	apic_soft_disable();
 
 #ifdef CONFIG_X86_32
@@ -1428,63 +1433,61 @@ union apic_ir {
 	u32		regs[APIC_IR_REGS];
 };
 
-static bool apic_check_and_ack(union apic_ir *irr, union apic_ir *isr)
+static bool apic_check_and_eoi_isr(union apic_ir *isr)
 {
 	int i, bit;
 
-	/* Read the IRRs */
-	for (i = 0; i < APIC_IR_REGS; i++)
-		irr->regs[i] = apic_read(APIC_IRR + i * 0x10);
-
 	/* Read the ISRs */
 	for (i = 0; i < APIC_IR_REGS; i++)
 		isr->regs[i] = apic_read(APIC_ISR + i * 0x10);
 
+	/* If the ISR map empty, nothing to do here. */
+	if (bitmap_empty(isr->map, APIC_IR_BITS))
+		return true;
+
 	/*
-	 * If the ISR map is not empty. ACK the APIC and run another round
-	 * to verify whether a pending IRR has been unblocked and turned
-	 * into a ISR.
+	 * There can be multiple ISR bits set when a high priority
+	 * interrupt preempted a lower priority one. Issue an EOI for each
+	 * set bit. The priority traversal order does not matter as there
+	 * can't be new ISR bits raised at this point. What matters is that
+	 * an EOI is issued for each ISR bit.
 	 */
-	if (!bitmap_empty(isr->map, APIC_IR_BITS)) {
-		/*
-		 * There can be multiple ISR bits set when a high priority
-		 * interrupt preempted a lower priority one. Issue an ACK
-		 * per set bit.
-		 */
-		for_each_set_bit(bit, isr->map, APIC_IR_BITS)
-			apic_eoi();
-		return true;
-	}
+	for_each_set_bit(bit, isr->map, APIC_IR_BITS)
+		apic_eoi();
 
-	return !bitmap_empty(irr->map, APIC_IR_BITS);
+	/* Reread the ISRs, they should be empty now */
+	for (i = 0; i < APIC_IR_REGS; i++)
+		isr->regs[i] = apic_read(APIC_ISR + i * 0x10);
+
+	return bitmap_empty(isr->map, APIC_IR_BITS);
 }
 
 /*
- * After a crash, we no longer service the interrupts and a pending
- * interrupt from previous kernel might still have ISR bit set.
+ * If a CPU services an interrupt and crashes before issuing EOI to the
+ * local APIC, the corresponding ISR bit is still set when the crashing CPU
+ * jumps into a crash kernel. Read the ISR and issue an EOI for each set
+ * bit to acknowledge it as otherwise these slots would be locked forever
+ * waiting for an EOI.
  *
- * Most probably by now the CPU has serviced that pending interrupt and it
- * might not have done the apic_eoi() because it thought, interrupt
- * came from i8259 as ExtInt. LAPIC did not get EOI so it does not clear
- * the ISR bit and cpu thinks it has already serviced the interrupt. Hence
- * a vector might get locked. It was noticed for timer irq (vector
- * 0x31). Issue an extra EOI to clear ISR.
+ * If there are pending bits in the IRR, then they won't be converted into
+ * ISR bits as the CPU has interrupts disabled. They will be delivered once
+ * the CPU enables interrupts and there is nothing which can prevent that.
  *
- * If there are pending IRR bits they turn into ISR bits after a higher
- * priority ISR bit has been acked.
+ * In the worst case this results in spurious interrupt warnings.
  */
-static void apic_pending_intr_clear(void)
+static void apic_clear_isr(void)
 {
-	union apic_ir irr, isr;
+	union apic_ir ir;
 	unsigned int i;
 
-	/* 512 loops are way oversized and give the APIC a chance to obey. */
-	for (i = 0; i < 512; i++) {
-		if (!apic_check_and_ack(&irr, &isr))
-			return;
-	}
-	/* Dump the IRR/ISR content if that failed */
-	pr_warn("APIC: Stale IRR: %256pb ISR: %256pb\n", irr.map, isr.map);
+	if (!apic_check_and_eoi_isr(&ir))
+		pr_warn("APIC: Stale ISR: %256pb\n", ir.map);
+
+	for (i = 0; i < APIC_IR_REGS; i++)
+		ir.regs[i] = apic_read(APIC_IRR + i * 0x10);
+
+	if (!bitmap_empty(ir.map, APIC_IR_BITS))
+		pr_warn("APIC: Stale IRR: %256pb\n", ir.map);
 }
 
 /**
@@ -1503,6 +1506,9 @@ static void setup_local_APIC(void)
 		return;
 	}
 
+	if (apic->setup)
+		apic->setup();
+
 	/*
 	 * If this comes from kexec/kcrash the APIC might be enabled in
 	 * SPIV. Soft disable it before doing further initialization.
@@ -1541,8 +1547,7 @@ static void setup_local_APIC(void)
 	value |= 0x10;
 	apic_write(APIC_TASKPRI, value);
 
-	/* Clear eventually stale ISR/IRR bits */
-	apic_pending_intr_clear();
+	apic_clear_isr();
 
 	/*
 	 * Now that we are all set up, enable the APIC
diff --git a/arch/x86/kernel/apic/vector.c b/arch/x86/kernel/apic/vector.c
index a947b46a8b64..bddc54465399 100644
--- a/arch/x86/kernel/apic/vector.c
+++ b/arch/x86/kernel/apic/vector.c
@@ -134,13 +134,20 @@ static void apic_update_irq_cfg(struct irq_data *irqd, unsigned int vector,
 
 	apicd->hw_irq_cfg.vector = vector;
 	apicd->hw_irq_cfg.dest_apicid = apic->calc_dest_apicid(cpu);
+
+	apic_update_vector(cpu, vector, true);
+
 	irq_data_update_effective_affinity(irqd, cpumask_of(cpu));
-	trace_vector_config(irqd->irq, vector, cpu,
-			    apicd->hw_irq_cfg.dest_apicid);
+	trace_vector_config(irqd->irq, vector, cpu, apicd->hw_irq_cfg.dest_apicid);
 }
 
-static void apic_update_vector(struct irq_data *irqd, unsigned int newvec,
-			       unsigned int newcpu)
+static void apic_free_vector(unsigned int cpu, unsigned int vector, bool managed)
+{
+	apic_update_vector(cpu, vector, false);
+	irq_matrix_free(vector_matrix, cpu, vector, managed);
+}
+
+static void chip_data_update(struct irq_data *irqd, unsigned int newvec, unsigned int newcpu)
 {
 	struct apic_chip_data *apicd = apic_chip_data(irqd);
 	struct irq_desc *desc = irq_data_to_desc(irqd);
@@ -174,8 +181,7 @@ static void apic_update_vector(struct irq_data *irqd, unsigned int newvec,
 		apicd->prev_cpu = apicd->cpu;
 		WARN_ON_ONCE(apicd->cpu == newcpu);
 	} else {
-		irq_matrix_free(vector_matrix, apicd->cpu, apicd->vector,
-				managed);
+		apic_free_vector(apicd->cpu, apicd->vector, managed);
 	}
 
 setnew:
@@ -261,7 +267,7 @@ assign_vector_locked(struct irq_data *irqd, const struct cpumask *dest)
 	trace_vector_alloc(irqd->irq, vector, resvd, vector);
 	if (vector < 0)
 		return vector;
-	apic_update_vector(irqd, vector, cpu);
+	chip_data_update(irqd, vector, cpu);
 
 	return 0;
 }
@@ -337,7 +343,7 @@ assign_managed_vector(struct irq_data *irqd, const struct cpumask *dest)
 	trace_vector_alloc_managed(irqd->irq, vector, vector);
 	if (vector < 0)
 		return vector;
-	apic_update_vector(irqd, vector, cpu);
+	chip_data_update(irqd, vector, cpu);
 
 	return 0;
 }
@@ -357,7 +363,7 @@ static void clear_irq_vector(struct irq_data *irqd)
 			   apicd->prev_cpu);
 
 	per_cpu(vector_irq, apicd->cpu)[vector] = VECTOR_SHUTDOWN;
-	irq_matrix_free(vector_matrix, apicd->cpu, vector, managed);
+	apic_free_vector(apicd->cpu, vector, managed);
 	apicd->vector = 0;
 
 	/* Clean up move in progress */
@@ -366,7 +372,7 @@ static void clear_irq_vector(struct irq_data *irqd)
 		return;
 
 	per_cpu(vector_irq, apicd->prev_cpu)[vector] = VECTOR_SHUTDOWN;
-	irq_matrix_free(vector_matrix, apicd->prev_cpu, vector, managed);
+	apic_free_vector(apicd->prev_cpu, vector, managed);
 	apicd->prev_vector = 0;
 	apicd->move_in_progress = 0;
 	hlist_del_init(&apicd->clist);
@@ -905,7 +911,7 @@ static void free_moved_vector(struct apic_chip_data *apicd)
 	 *    affinity mask comes online.
 	 */
 	trace_vector_free_moved(apicd->irq, cpu, vector, managed);
-	irq_matrix_free(vector_matrix, cpu, vector, managed);
+	apic_free_vector(cpu, vector, managed);
 	per_cpu(vector_irq, cpu)[vector] = VECTOR_UNUSED;
 	hlist_del_init(&apicd->clist);
 	apicd->prev_vector = 0;
diff --git a/arch/x86/kernel/apic/x2apic_savic.c b/arch/x86/kernel/apic/x2apic_savic.c
new file mode 100644
index 000000000000..dbc5678bc3b6
--- /dev/null
+++ b/arch/x86/kernel/apic/x2apic_savic.c
@@ -0,0 +1,428 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * AMD Secure AVIC Support (SEV-SNP Guests)
+ *
+ * Copyright (C) 2024 Advanced Micro Devices, Inc.
+ *
+ * Author: Neeraj Upadhyay <Neeraj.Upadhyay@amd.com>
+ */
+
+#include <linux/cc_platform.h>
+#include <linux/cpumask.h>
+#include <linux/percpu-defs.h>
+#include <linux/align.h>
+
+#include <asm/apic.h>
+#include <asm/sev.h>
+
+#include "local.h"
+
+struct secure_avic_page {
+	u8 regs[PAGE_SIZE];
+} __aligned(PAGE_SIZE);
+
+static struct secure_avic_page __percpu *savic_page __ro_after_init;
+
+static int savic_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+	return x2apic_enabled() && cc_platform_has(CC_ATTR_SNP_SECURE_AVIC);
+}
+
+static inline void *get_reg_bitmap(unsigned int cpu, unsigned int offset)
+{
+	return &per_cpu_ptr(savic_page, cpu)->regs[offset];
+}
+
+static inline void update_vector(unsigned int cpu, unsigned int offset,
+				 unsigned int vector, bool set)
+{
+	void *bitmap = get_reg_bitmap(cpu, offset);
+
+	if (set)
+		apic_set_vector(vector, bitmap);
+	else
+		apic_clear_vector(vector, bitmap);
+}
+
+#define SAVIC_ALLOWED_IRR	0x204
+
+/*
+ * When Secure AVIC is enabled, RDMSR/WRMSR of the APIC registers
+ * result in #VC exception (for non-accelerated register accesses)
+ * with VMEXIT_AVIC_NOACCEL error code. The #VC exception handler
+ * can read/write the x2APIC register in the guest APIC backing page.
+ *
+ * Since doing this would increase the latency of accessing x2APIC
+ * registers, instead of doing RDMSR/WRMSR based accesses and
+ * handling the APIC register reads/writes in the #VC exception handler,
+ * the read() and write() callbacks directly read/write the APIC register
+ * from/to the vCPU's APIC backing page.
+ */
+static u32 savic_read(u32 reg)
+{
+	void *ap = this_cpu_ptr(savic_page);
+
+	switch (reg) {
+	case APIC_LVTT:
+	case APIC_TMICT:
+	case APIC_TMCCT:
+	case APIC_TDCR:
+	case APIC_LVTTHMR:
+	case APIC_LVTPC:
+	case APIC_LVT0:
+	case APIC_LVT1:
+	case APIC_LVTERR:
+		return savic_ghcb_msr_read(reg);
+	case APIC_ID:
+	case APIC_LVR:
+	case APIC_TASKPRI:
+	case APIC_ARBPRI:
+	case APIC_PROCPRI:
+	case APIC_LDR:
+	case APIC_SPIV:
+	case APIC_ESR:
+	case APIC_EFEAT:
+	case APIC_ECTRL:
+	case APIC_SEOI:
+	case APIC_IER:
+	case APIC_EILVTn(0) ... APIC_EILVTn(3):
+		return apic_get_reg(ap, reg);
+	case APIC_ICR:
+		return (u32)apic_get_reg64(ap, reg);
+	case APIC_ISR ... APIC_ISR + 0x70:
+	case APIC_TMR ... APIC_TMR + 0x70:
+		if (WARN_ONCE(!IS_ALIGNED(reg, 16),
+			      "APIC register read offset 0x%x not aligned at 16 bytes", reg))
+			return 0;
+		return apic_get_reg(ap, reg);
+	/* IRR and ALLOWED_IRR offset range */
+	case APIC_IRR ... APIC_IRR + 0x74:
+		/*
+		 * Valid APIC_IRR/SAVIC_ALLOWED_IRR registers are at 16 bytes strides from
+		 * their respective base offset. APIC_IRRs are in the range
+		 *
+		 * (0x200, 0x210,  ..., 0x270)
+		 *
+		 * while the SAVIC_ALLOWED_IRR range starts 4 bytes later, in the range
+		 *
+		 * (0x204, 0x214, ..., 0x274).
+		 *
+		 * Filter out everything else.
+		 */
+		if (WARN_ONCE(!(IS_ALIGNED(reg, 16) ||
+				IS_ALIGNED(reg - 4, 16)),
+			      "Misaligned APIC_IRR/ALLOWED_IRR APIC register read offset 0x%x", reg))
+			return 0;
+		return apic_get_reg(ap, reg);
+	default:
+		pr_err("Error reading unknown Secure AVIC reg offset 0x%x\n", reg);
+		return 0;
+	}
+}
+
+#define SAVIC_NMI_REQ		0x278
+
+/*
+ * On WRMSR to APIC_SELF_IPI register by the guest, Secure AVIC hardware
+ * updates the APIC_IRR in the APIC backing page of the vCPU. In addition,
+ * hardware evaluates the new APIC_IRR update for interrupt injection to
+ * the vCPU. So, self IPIs are hardware-accelerated.
+ */
+static inline void self_ipi_reg_write(unsigned int vector)
+{
+	native_apic_msr_write(APIC_SELF_IPI, vector);
+}
+
+static void send_ipi_dest(unsigned int cpu, unsigned int vector, bool nmi)
+{
+	if (nmi)
+		apic_set_reg(per_cpu_ptr(savic_page, cpu), SAVIC_NMI_REQ, 1);
+	else
+		update_vector(cpu, APIC_IRR, vector, true);
+}
+
+static void send_ipi_allbut(unsigned int vector, bool nmi)
+{
+	unsigned int cpu, src_cpu;
+
+	guard(irqsave)();
+
+	src_cpu = raw_smp_processor_id();
+
+	for_each_cpu(cpu, cpu_online_mask) {
+		if (cpu == src_cpu)
+			continue;
+		send_ipi_dest(cpu, vector, nmi);
+	}
+}
+
+static inline void self_ipi(unsigned int vector, bool nmi)
+{
+	u32 icr_low = APIC_SELF_IPI | vector;
+
+	if (nmi)
+		icr_low |= APIC_DM_NMI;
+
+	native_x2apic_icr_write(icr_low, 0);
+}
+
+static void savic_icr_write(u32 icr_low, u32 icr_high)
+{
+	unsigned int dsh, vector;
+	u64 icr_data;
+	bool nmi;
+
+	dsh = icr_low & APIC_DEST_ALLBUT;
+	vector = icr_low & APIC_VECTOR_MASK;
+	nmi = ((icr_low & APIC_DM_FIXED_MASK) == APIC_DM_NMI);
+
+	switch (dsh) {
+	case APIC_DEST_SELF:
+		self_ipi(vector, nmi);
+		break;
+	case APIC_DEST_ALLINC:
+		self_ipi(vector, nmi);
+		fallthrough;
+	case APIC_DEST_ALLBUT:
+		send_ipi_allbut(vector, nmi);
+		break;
+	default:
+		send_ipi_dest(icr_high, vector, nmi);
+		break;
+	}
+
+	icr_data = ((u64)icr_high) << 32 | icr_low;
+	if (dsh != APIC_DEST_SELF)
+		savic_ghcb_msr_write(APIC_ICR, icr_data);
+	apic_set_reg64(this_cpu_ptr(savic_page), APIC_ICR, icr_data);
+}
+
+static void savic_write(u32 reg, u32 data)
+{
+	void *ap = this_cpu_ptr(savic_page);
+
+	switch (reg) {
+	case APIC_LVTT:
+	case APIC_TMICT:
+	case APIC_TDCR:
+	case APIC_LVT0:
+	case APIC_LVT1:
+	case APIC_LVTTHMR:
+	case APIC_LVTPC:
+	case APIC_LVTERR:
+		savic_ghcb_msr_write(reg, data);
+		break;
+	case APIC_TASKPRI:
+	case APIC_EOI:
+	case APIC_SPIV:
+	case SAVIC_NMI_REQ:
+	case APIC_ESR:
+	case APIC_ECTRL:
+	case APIC_SEOI:
+	case APIC_IER:
+	case APIC_EILVTn(0) ... APIC_EILVTn(3):
+		apic_set_reg(ap, reg, data);
+		break;
+	case APIC_ICR:
+		savic_icr_write(data, 0);
+		break;
+	case APIC_SELF_IPI:
+		self_ipi_reg_write(data);
+		break;
+	/* ALLOWED_IRR offsets are writable */
+	case SAVIC_ALLOWED_IRR ... SAVIC_ALLOWED_IRR + 0x70:
+		if (IS_ALIGNED(reg - 4, 16)) {
+			apic_set_reg(ap, reg, data);
+			break;
+		}
+		fallthrough;
+	default:
+		pr_err("Error writing unknown Secure AVIC reg offset 0x%x\n", reg);
+	}
+}
+
+static void send_ipi(u32 dest, unsigned int vector, unsigned int dsh)
+{
+	unsigned int icr_low;
+
+	icr_low = __prepare_ICR(dsh, vector, APIC_DEST_PHYSICAL);
+	savic_icr_write(icr_low, dest);
+}
+
+static void savic_send_ipi(int cpu, int vector)
+{
+	u32 dest = per_cpu(x86_cpu_to_apicid, cpu);
+
+	send_ipi(dest, vector, 0);
+}
+
+static void send_ipi_mask(const struct cpumask *mask, unsigned int vector, bool excl_self)
+{
+	unsigned int cpu, this_cpu;
+
+	guard(irqsave)();
+
+	this_cpu = raw_smp_processor_id();
+
+	for_each_cpu(cpu, mask) {
+		if (excl_self && cpu == this_cpu)
+			continue;
+		send_ipi(per_cpu(x86_cpu_to_apicid, cpu), vector, 0);
+	}
+}
+
+static void savic_send_ipi_mask(const struct cpumask *mask, int vector)
+{
+	send_ipi_mask(mask, vector, false);
+}
+
+static void savic_send_ipi_mask_allbutself(const struct cpumask *mask, int vector)
+{
+	send_ipi_mask(mask, vector, true);
+}
+
+static void savic_send_ipi_allbutself(int vector)
+{
+	send_ipi(0, vector, APIC_DEST_ALLBUT);
+}
+
+static void savic_send_ipi_all(int vector)
+{
+	send_ipi(0, vector, APIC_DEST_ALLINC);
+}
+
+static void savic_send_ipi_self(int vector)
+{
+	self_ipi_reg_write(vector);
+}
+
+static void savic_update_vector(unsigned int cpu, unsigned int vector, bool set)
+{
+	update_vector(cpu, SAVIC_ALLOWED_IRR, vector, set);
+}
+
+static void savic_eoi(void)
+{
+	unsigned int cpu;
+	int vec;
+
+	cpu = raw_smp_processor_id();
+	vec = apic_find_highest_vector(get_reg_bitmap(cpu, APIC_ISR));
+	if (WARN_ONCE(vec == -1, "EOI write while no active interrupt in APIC_ISR"))
+		return;
+
+	/* Is level-triggered interrupt? */
+	if (apic_test_vector(vec, get_reg_bitmap(cpu, APIC_TMR))) {
+		update_vector(cpu, APIC_ISR, vec, false);
+		/*
+		 * Propagate the EOI write to the hypervisor for level-triggered
+		 * interrupts. Return to the guest from GHCB protocol event takes
+		 * care of re-evaluating interrupt state.
+		 */
+		savic_ghcb_msr_write(APIC_EOI, 0);
+	} else {
+		/*
+		 * Hardware clears APIC_ISR and re-evaluates the interrupt state
+		 * to determine if there is any pending interrupt which can be
+		 * delivered to CPU.
+		 */
+		native_apic_msr_eoi();
+	}
+}
+
+static void savic_teardown(void)
+{
+	/* Disable Secure AVIC */
+	native_wrmsrq(MSR_AMD64_SAVIC_CONTROL, 0);
+	savic_unregister_gpa(NULL);
+}
+
+static void savic_setup(void)
+{
+	void *ap = this_cpu_ptr(savic_page);
+	enum es_result res;
+	unsigned long gpa;
+
+	/*
+	 * Before Secure AVIC is enabled, APIC MSR reads are intercepted.
+	 * APIC_ID MSR read returns the value from the hypervisor.
+	 */
+	apic_set_reg(ap, APIC_ID, native_apic_msr_read(APIC_ID));
+
+	gpa = __pa(ap);
+
+	/*
+	 * The NPT entry for a vCPU's APIC backing page must always be
+	 * present when the vCPU is running in order for Secure AVIC to
+	 * function. A VMEXIT_BUSY is returned on VMRUN and the vCPU cannot
+	 * be resumed if the NPT entry for the APIC backing page is not
+	 * present. Notify GPA of the vCPU's APIC backing page to the
+	 * hypervisor by calling savic_register_gpa(). Before executing
+	 * VMRUN, the hypervisor makes use of this information to make sure
+	 * the APIC backing page is mapped in NPT.
+	 */
+	res = savic_register_gpa(gpa);
+	if (res != ES_OK)
+		sev_es_terminate(SEV_TERM_SET_LINUX, GHCB_TERM_SAVIC_FAIL);
+
+	native_wrmsrq(MSR_AMD64_SAVIC_CONTROL,
+		      gpa | MSR_AMD64_SAVIC_EN | MSR_AMD64_SAVIC_ALLOWEDNMI);
+}
+
+static int savic_probe(void)
+{
+	if (!cc_platform_has(CC_ATTR_SNP_SECURE_AVIC))
+		return 0;
+
+	if (!x2apic_mode) {
+		pr_err("Secure AVIC enabled in non x2APIC mode\n");
+		sev_es_terminate(SEV_TERM_SET_LINUX, GHCB_TERM_SAVIC_FAIL);
+		/* unreachable */
+	}
+
+	savic_page = alloc_percpu(struct secure_avic_page);
+	if (!savic_page)
+		sev_es_terminate(SEV_TERM_SET_LINUX, GHCB_TERM_SAVIC_FAIL);
+
+	return 1;
+}
+
+static struct apic apic_x2apic_savic __ro_after_init = {
+
+	.name				= "secure avic x2apic",
+	.probe				= savic_probe,
+	.acpi_madt_oem_check		= savic_acpi_madt_oem_check,
+	.setup				= savic_setup,
+	.teardown			= savic_teardown,
+
+	.dest_mode_logical		= false,
+
+	.disable_esr			= 0,
+
+	.cpu_present_to_apicid		= default_cpu_present_to_apicid,
+
+	.max_apic_id			= UINT_MAX,
+	.x2apic_set_max_apicid		= true,
+	.get_apic_id			= x2apic_get_apic_id,
+
+	.calc_dest_apicid		= apic_default_calc_apicid,
+
+	.send_IPI			= savic_send_ipi,
+	.send_IPI_mask			= savic_send_ipi_mask,
+	.send_IPI_mask_allbutself	= savic_send_ipi_mask_allbutself,
+	.send_IPI_allbutself		= savic_send_ipi_allbutself,
+	.send_IPI_all			= savic_send_ipi_all,
+	.send_IPI_self			= savic_send_ipi_self,
+
+	.nmi_to_offline_cpu		= true,
+
+	.read				= savic_read,
+	.write				= savic_write,
+	.eoi				= savic_eoi,
+	.icr_read			= native_x2apic_icr_read,
+	.icr_write			= savic_icr_write,
+
+	.update_vector			= savic_update_vector,
+};
+
+apic_driver(apic_x2apic_savic);
diff --git a/arch/x86/kernel/cpu/Makefile b/arch/x86/kernel/cpu/Makefile
index 1e26179ff18c..2f8a58ef690e 100644
--- a/arch/x86/kernel/cpu/Makefile
+++ b/arch/x86/kernel/cpu/Makefile
@@ -58,6 +58,7 @@ obj-$(CONFIG_X86_SGX)			+= sgx/
 obj-$(CONFIG_X86_LOCAL_APIC)		+= perfctr-watchdog.o
 
 obj-$(CONFIG_HYPERVISOR_GUEST)		+= vmware.o hypervisor.o mshyperv.o
+obj-$(CONFIG_BHYVE_GUEST)		+= bhyve.o
 obj-$(CONFIG_ACRN_GUEST)		+= acrn.o
 
 obj-$(CONFIG_DEBUG_FS)			+= debugfs.o
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index a5ece6ebe8a7..a6f88ca1a6b4 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -1326,8 +1326,8 @@ static const char * const s5_reset_reason_txt[] = {
 
 static __init int print_s5_reset_status_mmio(void)
 {
-	unsigned long value;
 	void __iomem *addr;
+	u32 value;
 	int i;
 
 	if (!cpu_feature_enabled(X86_FEATURE_ZEN))
@@ -1340,12 +1340,16 @@ static __init int print_s5_reset_status_mmio(void)
 	value = ioread32(addr);
 	iounmap(addr);
 
+	/* Value with "all bits set" is an error response and should be ignored. */
+	if (value == U32_MAX)
+		return 0;
+
 	for (i = 0; i < ARRAY_SIZE(s5_reset_reason_txt); i++) {
 		if (!(value & BIT(i)))
 			continue;
 
 		if (s5_reset_reason_txt[i]) {
-			pr_info("x86/amd: Previous system reset reason [0x%08lx]: %s\n",
+			pr_info("x86/amd: Previous system reset reason [0x%08x]: %s\n",
 				value, s5_reset_reason_txt[i]);
 		}
 	}
diff --git a/arch/x86/kernel/cpu/bhyve.c b/arch/x86/kernel/cpu/bhyve.c
new file mode 100644
index 000000000000..f1a8ca3dd1ed
--- /dev/null
+++ b/arch/x86/kernel/cpu/bhyve.c
@@ -0,0 +1,66 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * FreeBSD Bhyve guest enlightenments
+ *
+ * Copyright © 2025 Amazon.com, Inc. or its affiliates.
+ *
+ * Author: David Woodhouse <dwmw2@infradead.org>
+ */
+
+#include <linux/init.h>
+#include <linux/export.h>
+#include <asm/processor.h>
+#include <asm/hypervisor.h>
+
+static uint32_t bhyve_cpuid_base;
+static uint32_t bhyve_cpuid_max;
+
+#define BHYVE_SIGNATURE			"bhyve bhyve "
+
+#define CPUID_BHYVE_FEATURES		0x40000001
+
+/* Features advertised in CPUID_BHYVE_FEATURES %eax */
+
+/* MSI Extended Dest ID */
+#define CPUID_BHYVE_FEAT_EXT_DEST_ID	(1UL << 0)
+
+static uint32_t __init bhyve_detect(void)
+{
+	if (!cpu_feature_enabled(X86_FEATURE_HYPERVISOR))
+                return 0;
+
+	bhyve_cpuid_base = cpuid_base_hypervisor(BHYVE_SIGNATURE, 0);
+	if (!bhyve_cpuid_base)
+		return 0;
+
+	bhyve_cpuid_max = cpuid_eax(bhyve_cpuid_base);
+	return bhyve_cpuid_max;
+}
+
+static uint32_t bhyve_features(void)
+{
+	unsigned int cpuid_leaf = bhyve_cpuid_base | CPUID_BHYVE_FEATURES;
+
+	if (bhyve_cpuid_max < cpuid_leaf)
+		return 0;
+
+	return cpuid_eax(cpuid_leaf);
+}
+
+static bool __init bhyve_ext_dest_id(void)
+{
+	return !!(bhyve_features() & CPUID_BHYVE_FEAT_EXT_DEST_ID);
+}
+
+static bool __init bhyve_x2apic_available(void)
+{
+	return true;
+}
+
+const struct hypervisor_x86 x86_hyper_bhyve __refconst = {
+	.name			= "Bhyve",
+	.detect			= bhyve_detect,
+	.init.init_platform	= x86_init_noop,
+	.init.x2apic_available	= bhyve_x2apic_available,
+	.init.msi_ext_dest_id	= bhyve_ext_dest_id,
+};
diff --git a/arch/x86/kernel/cpu/bugs.c b/arch/x86/kernel/cpu/bugs.c
index b74bf937cd9f..6a526ae1fe99 100644
--- a/arch/x86/kernel/cpu/bugs.c
+++ b/arch/x86/kernel/cpu/bugs.c
@@ -96,6 +96,9 @@ static void __init its_update_mitigation(void);
 static void __init its_apply_mitigation(void);
 static void __init tsa_select_mitigation(void);
 static void __init tsa_apply_mitigation(void);
+static void __init vmscape_select_mitigation(void);
+static void __init vmscape_update_mitigation(void);
+static void __init vmscape_apply_mitigation(void);
 
 /* The base value of the SPEC_CTRL MSR without task-specific bits set */
 u64 x86_spec_ctrl_base;
@@ -105,6 +108,14 @@ EXPORT_SYMBOL_GPL(x86_spec_ctrl_base);
 DEFINE_PER_CPU(u64, x86_spec_ctrl_current);
 EXPORT_PER_CPU_SYMBOL_GPL(x86_spec_ctrl_current);
 
+/*
+ * Set when the CPU has run a potentially malicious guest. An IBPB will
+ * be needed to before running userspace. That IBPB will flush the branch
+ * predictor content.
+ */
+DEFINE_PER_CPU(bool, x86_ibpb_exit_to_user);
+EXPORT_PER_CPU_SYMBOL_GPL(x86_ibpb_exit_to_user);
+
 u64 x86_pred_cmd __ro_after_init = PRED_CMD_IBPB;
 
 static u64 __ro_after_init x86_arch_cap_msr;
@@ -262,6 +273,7 @@ void __init cpu_select_mitigations(void)
 	its_select_mitigation();
 	bhi_select_mitigation();
 	tsa_select_mitigation();
+	vmscape_select_mitigation();
 
 	/*
 	 * After mitigations are selected, some may need to update their
@@ -293,6 +305,7 @@ void __init cpu_select_mitigations(void)
 	bhi_update_mitigation();
 	/* srso_update_mitigation() depends on retbleed_update_mitigation(). */
 	srso_update_mitigation();
+	vmscape_update_mitigation();
 
 	spectre_v1_apply_mitigation();
 	spectre_v2_apply_mitigation();
@@ -310,6 +323,7 @@ void __init cpu_select_mitigations(void)
 	its_apply_mitigation();
 	bhi_apply_mitigation();
 	tsa_apply_mitigation();
+	vmscape_apply_mitigation();
 }
 
 /*
@@ -386,7 +400,6 @@ static bool __init should_mitigate_vuln(unsigned int bug)
 
 	case X86_BUG_SPECTRE_V2:
 	case X86_BUG_RETBLEED:
-	case X86_BUG_SRSO:
 	case X86_BUG_L1TF:
 	case X86_BUG_ITS:
 		return cpu_attack_vector_mitigated(CPU_MITIGATE_USER_KERNEL) ||
@@ -417,6 +430,13 @@ static bool __init should_mitigate_vuln(unsigned int bug)
 		       cpu_attack_vector_mitigated(CPU_MITIGATE_USER_USER) ||
 		       cpu_attack_vector_mitigated(CPU_MITIGATE_GUEST_GUEST) ||
 		       (smt_mitigations != SMT_MITIGATIONS_OFF);
+
+	case X86_BUG_SPEC_STORE_BYPASS:
+		return cpu_attack_vector_mitigated(CPU_MITIGATE_USER_USER);
+
+	case X86_BUG_VMSCAPE:
+		return cpu_attack_vector_mitigated(CPU_MITIGATE_GUEST_HOST);
+
 	default:
 		WARN(1, "Unknown bug %x\n", bug);
 		return false;
@@ -667,8 +687,7 @@ static const char * const mmio_strings[] = {
 
 static void __init mmio_select_mitigation(void)
 {
-	if (!boot_cpu_has_bug(X86_BUG_MMIO_STALE_DATA) ||
-	     cpu_mitigations_off()) {
+	if (!boot_cpu_has_bug(X86_BUG_MMIO_STALE_DATA)) {
 		mmio_mitigation = MMIO_MITIGATION_OFF;
 		return;
 	}
@@ -1069,10 +1088,8 @@ static void __init gds_select_mitigation(void)
 	if (gds_mitigation == GDS_MITIGATION_AUTO) {
 		if (should_mitigate_vuln(X86_BUG_GDS))
 			gds_mitigation = GDS_MITIGATION_FULL;
-		else {
+		else
 			gds_mitigation = GDS_MITIGATION_OFF;
-			return;
-		}
 	}
 
 	/* No microcode */
@@ -1445,8 +1462,10 @@ static void __init retbleed_update_mitigation(void)
 			retbleed_mitigation = RETBLEED_MITIGATION_EIBRS;
 			break;
 		default:
-			if (retbleed_mitigation != RETBLEED_MITIGATION_STUFF)
+			if (retbleed_mitigation != RETBLEED_MITIGATION_STUFF) {
 				pr_err(RETBLEED_INTEL_MSG);
+				retbleed_mitigation = RETBLEED_MITIGATION_NONE;
+			}
 		}
 	}
 
@@ -1827,9 +1846,10 @@ enum spectre_v2_mitigation_cmd {
 	SPECTRE_V2_CMD_IBRS,
 };
 
-static enum spectre_v2_mitigation_cmd spectre_v2_cmd __ro_after_init = SPECTRE_V2_CMD_AUTO;
+static enum spectre_v2_mitigation_cmd spectre_v2_cmd __ro_after_init =
+	IS_ENABLED(CONFIG_MITIGATION_SPECTRE_V2) ? SPECTRE_V2_CMD_AUTO : SPECTRE_V2_CMD_NONE;
 
-enum spectre_v2_user_cmd {
+enum spectre_v2_user_mitigation_cmd {
 	SPECTRE_V2_USER_CMD_NONE,
 	SPECTRE_V2_USER_CMD_AUTO,
 	SPECTRE_V2_USER_CMD_FORCE,
@@ -1839,6 +1859,9 @@ enum spectre_v2_user_cmd {
 	SPECTRE_V2_USER_CMD_SECCOMP_IBPB,
 };
 
+static enum spectre_v2_user_mitigation_cmd spectre_v2_user_cmd __ro_after_init =
+	IS_ENABLED(CONFIG_MITIGATION_SPECTRE_V2) ? SPECTRE_V2_USER_CMD_AUTO : SPECTRE_V2_USER_CMD_NONE;
+
 static const char * const spectre_v2_user_strings[] = {
 	[SPECTRE_V2_USER_NONE]			= "User space: Vulnerable",
 	[SPECTRE_V2_USER_STRICT]		= "User space: Mitigation: STIBP protection",
@@ -1847,50 +1870,31 @@ static const char * const spectre_v2_user_strings[] = {
 	[SPECTRE_V2_USER_SECCOMP]		= "User space: Mitigation: STIBP via seccomp and prctl",
 };
 
-static const struct {
-	const char			*option;
-	enum spectre_v2_user_cmd	cmd;
-	bool				secure;
-} v2_user_options[] __initconst = {
-	{ "auto",		SPECTRE_V2_USER_CMD_AUTO,		false },
-	{ "off",		SPECTRE_V2_USER_CMD_NONE,		false },
-	{ "on",			SPECTRE_V2_USER_CMD_FORCE,		true  },
-	{ "prctl",		SPECTRE_V2_USER_CMD_PRCTL,		false },
-	{ "prctl,ibpb",		SPECTRE_V2_USER_CMD_PRCTL_IBPB,		false },
-	{ "seccomp",		SPECTRE_V2_USER_CMD_SECCOMP,		false },
-	{ "seccomp,ibpb",	SPECTRE_V2_USER_CMD_SECCOMP_IBPB,	false },
-};
-
-static void __init spec_v2_user_print_cond(const char *reason, bool secure)
-{
-	if (boot_cpu_has_bug(X86_BUG_SPECTRE_V2) != secure)
-		pr_info("spectre_v2_user=%s forced on command line.\n", reason);
-}
-
-static enum spectre_v2_user_cmd __init spectre_v2_parse_user_cmdline(void)
+static int __init spectre_v2_user_parse_cmdline(char *str)
 {
-	char arg[20];
-	int ret, i;
-
-	if (!IS_ENABLED(CONFIG_MITIGATION_SPECTRE_V2))
-		return SPECTRE_V2_USER_CMD_NONE;
-
-	ret = cmdline_find_option(boot_command_line, "spectre_v2_user",
-				  arg, sizeof(arg));
-	if (ret < 0)
-		return SPECTRE_V2_USER_CMD_AUTO;
+	if (!str)
+		return -EINVAL;
 
-	for (i = 0; i < ARRAY_SIZE(v2_user_options); i++) {
-		if (match_option(arg, ret, v2_user_options[i].option)) {
-			spec_v2_user_print_cond(v2_user_options[i].option,
-						v2_user_options[i].secure);
-			return v2_user_options[i].cmd;
-		}
-	}
+	if (!strcmp(str, "auto"))
+		spectre_v2_user_cmd = SPECTRE_V2_USER_CMD_AUTO;
+	else if (!strcmp(str, "off"))
+		spectre_v2_user_cmd = SPECTRE_V2_USER_CMD_NONE;
+	else if (!strcmp(str, "on"))
+		spectre_v2_user_cmd = SPECTRE_V2_USER_CMD_FORCE;
+	else if (!strcmp(str, "prctl"))
+		spectre_v2_user_cmd = SPECTRE_V2_USER_CMD_PRCTL;
+	else if (!strcmp(str, "prctl,ibpb"))
+		spectre_v2_user_cmd = SPECTRE_V2_USER_CMD_PRCTL_IBPB;
+	else if (!strcmp(str, "seccomp"))
+		spectre_v2_user_cmd = SPECTRE_V2_USER_CMD_SECCOMP;
+	else if (!strcmp(str, "seccomp,ibpb"))
+		spectre_v2_user_cmd = SPECTRE_V2_USER_CMD_SECCOMP_IBPB;
+	else
+		pr_err("Ignoring unknown spectre_v2_user option (%s).", str);
 
-	pr_err("Unknown user space protection option (%s). Switching to default\n", arg);
-	return SPECTRE_V2_USER_CMD_AUTO;
+	return 0;
 }
+early_param("spectre_v2_user", spectre_v2_user_parse_cmdline);
 
 static inline bool spectre_v2_in_ibrs_mode(enum spectre_v2_mitigation mode)
 {
@@ -1902,7 +1906,7 @@ static void __init spectre_v2_user_select_mitigation(void)
 	if (!boot_cpu_has(X86_FEATURE_IBPB) && !boot_cpu_has(X86_FEATURE_STIBP))
 		return;
 
-	switch (spectre_v2_parse_user_cmdline()) {
+	switch (spectre_v2_user_cmd) {
 	case SPECTRE_V2_USER_CMD_NONE:
 		return;
 	case SPECTRE_V2_USER_CMD_FORCE:
@@ -2030,119 +2034,61 @@ static void __init spectre_v2_user_apply_mitigation(void)
 static const char * const spectre_v2_strings[] = {
 	[SPECTRE_V2_NONE]			= "Vulnerable",
 	[SPECTRE_V2_RETPOLINE]			= "Mitigation: Retpolines",
-	[SPECTRE_V2_LFENCE]			= "Mitigation: LFENCE",
+	[SPECTRE_V2_LFENCE]			= "Vulnerable: LFENCE",
 	[SPECTRE_V2_EIBRS]			= "Mitigation: Enhanced / Automatic IBRS",
 	[SPECTRE_V2_EIBRS_LFENCE]		= "Mitigation: Enhanced / Automatic IBRS + LFENCE",
 	[SPECTRE_V2_EIBRS_RETPOLINE]		= "Mitigation: Enhanced / Automatic IBRS + Retpolines",
 	[SPECTRE_V2_IBRS]			= "Mitigation: IBRS",
 };
 
-static const struct {
-	const char *option;
-	enum spectre_v2_mitigation_cmd cmd;
-	bool secure;
-} mitigation_options[] __initconst = {
-	{ "off",		SPECTRE_V2_CMD_NONE,		  false },
-	{ "on",			SPECTRE_V2_CMD_FORCE,		  true  },
-	{ "retpoline",		SPECTRE_V2_CMD_RETPOLINE,	  false },
-	{ "retpoline,amd",	SPECTRE_V2_CMD_RETPOLINE_LFENCE,  false },
-	{ "retpoline,lfence",	SPECTRE_V2_CMD_RETPOLINE_LFENCE,  false },
-	{ "retpoline,generic",	SPECTRE_V2_CMD_RETPOLINE_GENERIC, false },
-	{ "eibrs",		SPECTRE_V2_CMD_EIBRS,		  false },
-	{ "eibrs,lfence",	SPECTRE_V2_CMD_EIBRS_LFENCE,	  false },
-	{ "eibrs,retpoline",	SPECTRE_V2_CMD_EIBRS_RETPOLINE,	  false },
-	{ "auto",		SPECTRE_V2_CMD_AUTO,		  false },
-	{ "ibrs",		SPECTRE_V2_CMD_IBRS,              false },
-};
+static bool nospectre_v2 __ro_after_init;
 
-static void __init spec_v2_print_cond(const char *reason, bool secure)
+static int __init nospectre_v2_parse_cmdline(char *str)
 {
-	if (boot_cpu_has_bug(X86_BUG_SPECTRE_V2) != secure)
-		pr_info("%s selected on command line.\n", reason);
+	nospectre_v2 = true;
+	spectre_v2_cmd = SPECTRE_V2_CMD_NONE;
+	return 0;
 }
+early_param("nospectre_v2", nospectre_v2_parse_cmdline);
 
-static enum spectre_v2_mitigation_cmd __init spectre_v2_parse_cmdline(void)
+static int __init spectre_v2_parse_cmdline(char *str)
 {
-	enum spectre_v2_mitigation_cmd cmd;
-	char arg[20];
-	int ret, i;
-
-	cmd = IS_ENABLED(CONFIG_MITIGATION_SPECTRE_V2) ?  SPECTRE_V2_CMD_AUTO : SPECTRE_V2_CMD_NONE;
-	if (cmdline_find_option_bool(boot_command_line, "nospectre_v2"))
-		return SPECTRE_V2_CMD_NONE;
-
-	ret = cmdline_find_option(boot_command_line, "spectre_v2", arg, sizeof(arg));
-	if (ret < 0)
-		return cmd;
-
-	for (i = 0; i < ARRAY_SIZE(mitigation_options); i++) {
-		if (!match_option(arg, ret, mitigation_options[i].option))
-			continue;
-		cmd = mitigation_options[i].cmd;
-		break;
-	}
-
-	if (i >= ARRAY_SIZE(mitigation_options)) {
-		pr_err("unknown option (%s). Switching to default mode\n", arg);
-		return cmd;
-	}
-
-	if ((cmd == SPECTRE_V2_CMD_RETPOLINE ||
-	     cmd == SPECTRE_V2_CMD_RETPOLINE_LFENCE ||
-	     cmd == SPECTRE_V2_CMD_RETPOLINE_GENERIC ||
-	     cmd == SPECTRE_V2_CMD_EIBRS_LFENCE ||
-	     cmd == SPECTRE_V2_CMD_EIBRS_RETPOLINE) &&
-	    !IS_ENABLED(CONFIG_MITIGATION_RETPOLINE)) {
-		pr_err("%s selected but not compiled in. Switching to AUTO select\n",
-		       mitigation_options[i].option);
-		return SPECTRE_V2_CMD_AUTO;
-	}
-
-	if ((cmd == SPECTRE_V2_CMD_EIBRS ||
-	     cmd == SPECTRE_V2_CMD_EIBRS_LFENCE ||
-	     cmd == SPECTRE_V2_CMD_EIBRS_RETPOLINE) &&
-	    !boot_cpu_has(X86_FEATURE_IBRS_ENHANCED)) {
-		pr_err("%s selected but CPU doesn't have Enhanced or Automatic IBRS. Switching to AUTO select\n",
-		       mitigation_options[i].option);
-		return SPECTRE_V2_CMD_AUTO;
-	}
-
-	if ((cmd == SPECTRE_V2_CMD_RETPOLINE_LFENCE ||
-	     cmd == SPECTRE_V2_CMD_EIBRS_LFENCE) &&
-	    !boot_cpu_has(X86_FEATURE_LFENCE_RDTSC)) {
-		pr_err("%s selected, but CPU doesn't have a serializing LFENCE. Switching to AUTO select\n",
-		       mitigation_options[i].option);
-		return SPECTRE_V2_CMD_AUTO;
-	}
-
-	if (cmd == SPECTRE_V2_CMD_IBRS && !IS_ENABLED(CONFIG_MITIGATION_IBRS_ENTRY)) {
-		pr_err("%s selected but not compiled in. Switching to AUTO select\n",
-		       mitigation_options[i].option);
-		return SPECTRE_V2_CMD_AUTO;
-	}
-
-	if (cmd == SPECTRE_V2_CMD_IBRS && boot_cpu_data.x86_vendor != X86_VENDOR_INTEL) {
-		pr_err("%s selected but not Intel CPU. Switching to AUTO select\n",
-		       mitigation_options[i].option);
-		return SPECTRE_V2_CMD_AUTO;
-	}
+	if (!str)
+		return -EINVAL;
 
-	if (cmd == SPECTRE_V2_CMD_IBRS && !boot_cpu_has(X86_FEATURE_IBRS)) {
-		pr_err("%s selected but CPU doesn't have IBRS. Switching to AUTO select\n",
-		       mitigation_options[i].option);
-		return SPECTRE_V2_CMD_AUTO;
-	}
+	if (nospectre_v2)
+		return 0;
 
-	if (cmd == SPECTRE_V2_CMD_IBRS && cpu_feature_enabled(X86_FEATURE_XENPV)) {
-		pr_err("%s selected but running as XenPV guest. Switching to AUTO select\n",
-		       mitigation_options[i].option);
-		return SPECTRE_V2_CMD_AUTO;
+	if (!strcmp(str, "off")) {
+		spectre_v2_cmd = SPECTRE_V2_CMD_NONE;
+	} else if (!strcmp(str, "on")) {
+		spectre_v2_cmd = SPECTRE_V2_CMD_FORCE;
+		setup_force_cpu_bug(X86_BUG_SPECTRE_V2);
+		setup_force_cpu_bug(X86_BUG_SPECTRE_V2_USER);
+	} else if (!strcmp(str, "retpoline")) {
+		spectre_v2_cmd = SPECTRE_V2_CMD_RETPOLINE;
+	} else if (!strcmp(str, "retpoline,amd") ||
+		 !strcmp(str, "retpoline,lfence")) {
+		spectre_v2_cmd = SPECTRE_V2_CMD_RETPOLINE_LFENCE;
+	} else if (!strcmp(str, "retpoline,generic")) {
+		spectre_v2_cmd = SPECTRE_V2_CMD_RETPOLINE_GENERIC;
+	} else if (!strcmp(str, "eibrs")) {
+		spectre_v2_cmd = SPECTRE_V2_CMD_EIBRS;
+	} else if (!strcmp(str, "eibrs,lfence")) {
+		spectre_v2_cmd = SPECTRE_V2_CMD_EIBRS_LFENCE;
+	} else if (!strcmp(str, "eibrs,retpoline")) {
+		spectre_v2_cmd = SPECTRE_V2_CMD_EIBRS_RETPOLINE;
+	} else if (!strcmp(str, "auto")) {
+		spectre_v2_cmd = SPECTRE_V2_CMD_AUTO;
+	} else if (!strcmp(str, "ibrs")) {
+		spectre_v2_cmd = SPECTRE_V2_CMD_IBRS;
+	} else {
+		pr_err("Ignoring unknown spectre_v2 option (%s).", str);
 	}
 
-	spec_v2_print_cond(mitigation_options[i].option,
-			   mitigation_options[i].secure);
-	return cmd;
+	return 0;
 }
+early_param("spectre_v2", spectre_v2_parse_cmdline);
 
 static enum spectre_v2_mitigation __init spectre_v2_select_retpoline(void)
 {
@@ -2291,10 +2237,6 @@ static void __init bhi_update_mitigation(void)
 {
 	if (spectre_v2_cmd == SPECTRE_V2_CMD_NONE)
 		bhi_mitigation = BHI_MITIGATION_OFF;
-
-	if (!boot_cpu_has_bug(X86_BUG_SPECTRE_V2) &&
-	     spectre_v2_cmd == SPECTRE_V2_CMD_AUTO)
-		bhi_mitigation = BHI_MITIGATION_OFF;
 }
 
 static void __init bhi_apply_mitigation(void)
@@ -2330,11 +2272,55 @@ static void __init bhi_apply_mitigation(void)
 
 static void __init spectre_v2_select_mitigation(void)
 {
-	spectre_v2_cmd = spectre_v2_parse_cmdline();
+	if ((spectre_v2_cmd == SPECTRE_V2_CMD_RETPOLINE ||
+	     spectre_v2_cmd == SPECTRE_V2_CMD_RETPOLINE_LFENCE ||
+	     spectre_v2_cmd == SPECTRE_V2_CMD_RETPOLINE_GENERIC ||
+	     spectre_v2_cmd == SPECTRE_V2_CMD_EIBRS_LFENCE ||
+	     spectre_v2_cmd == SPECTRE_V2_CMD_EIBRS_RETPOLINE) &&
+	    !IS_ENABLED(CONFIG_MITIGATION_RETPOLINE)) {
+		pr_err("RETPOLINE selected but not compiled in. Switching to AUTO select\n");
+		spectre_v2_cmd = SPECTRE_V2_CMD_AUTO;
+	}
+
+	if ((spectre_v2_cmd == SPECTRE_V2_CMD_EIBRS ||
+	     spectre_v2_cmd == SPECTRE_V2_CMD_EIBRS_LFENCE ||
+	     spectre_v2_cmd == SPECTRE_V2_CMD_EIBRS_RETPOLINE) &&
+	    !boot_cpu_has(X86_FEATURE_IBRS_ENHANCED)) {
+		pr_err("EIBRS selected but CPU doesn't have Enhanced or Automatic IBRS. Switching to AUTO select\n");
+		spectre_v2_cmd = SPECTRE_V2_CMD_AUTO;
+	}
+
+	if ((spectre_v2_cmd == SPECTRE_V2_CMD_RETPOLINE_LFENCE ||
+	     spectre_v2_cmd == SPECTRE_V2_CMD_EIBRS_LFENCE) &&
+	    !boot_cpu_has(X86_FEATURE_LFENCE_RDTSC)) {
+		pr_err("LFENCE selected, but CPU doesn't have a serializing LFENCE. Switching to AUTO select\n");
+		spectre_v2_cmd = SPECTRE_V2_CMD_AUTO;
+	}
+
+	if (spectre_v2_cmd == SPECTRE_V2_CMD_IBRS && !IS_ENABLED(CONFIG_MITIGATION_IBRS_ENTRY)) {
+		pr_err("IBRS selected but not compiled in. Switching to AUTO select\n");
+		spectre_v2_cmd = SPECTRE_V2_CMD_AUTO;
+	}
 
-	if (!boot_cpu_has_bug(X86_BUG_SPECTRE_V2) &&
-	    (spectre_v2_cmd == SPECTRE_V2_CMD_NONE || spectre_v2_cmd == SPECTRE_V2_CMD_AUTO))
+	if (spectre_v2_cmd == SPECTRE_V2_CMD_IBRS && boot_cpu_data.x86_vendor != X86_VENDOR_INTEL) {
+		pr_err("IBRS selected but not Intel CPU. Switching to AUTO select\n");
+		spectre_v2_cmd = SPECTRE_V2_CMD_AUTO;
+	}
+
+	if (spectre_v2_cmd == SPECTRE_V2_CMD_IBRS && !boot_cpu_has(X86_FEATURE_IBRS)) {
+		pr_err("IBRS selected but CPU doesn't have IBRS. Switching to AUTO select\n");
+		spectre_v2_cmd = SPECTRE_V2_CMD_AUTO;
+	}
+
+	if (spectre_v2_cmd == SPECTRE_V2_CMD_IBRS && cpu_feature_enabled(X86_FEATURE_XENPV)) {
+		pr_err("IBRS selected but running as XenPV guest. Switching to AUTO select\n");
+		spectre_v2_cmd = SPECTRE_V2_CMD_AUTO;
+	}
+
+	if (!boot_cpu_has_bug(X86_BUG_SPECTRE_V2)) {
+		spectre_v2_cmd = SPECTRE_V2_CMD_NONE;
 		return;
+	}
 
 	switch (spectre_v2_cmd) {
 	case SPECTRE_V2_CMD_NONE:
@@ -2537,101 +2523,11 @@ static void update_mds_branch_idle(void)
 	}
 }
 
-#define MDS_MSG_SMT "MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.\n"
-#define TAA_MSG_SMT "TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details.\n"
-#define MMIO_MSG_SMT "MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details.\n"
-
-void cpu_bugs_smt_update(void)
-{
-	mutex_lock(&spec_ctrl_mutex);
-
-	if (sched_smt_active() && unprivileged_ebpf_enabled() &&
-	    spectre_v2_enabled == SPECTRE_V2_EIBRS_LFENCE)
-		pr_warn_once(SPECTRE_V2_EIBRS_LFENCE_EBPF_SMT_MSG);
-
-	switch (spectre_v2_user_stibp) {
-	case SPECTRE_V2_USER_NONE:
-		break;
-	case SPECTRE_V2_USER_STRICT:
-	case SPECTRE_V2_USER_STRICT_PREFERRED:
-		update_stibp_strict();
-		break;
-	case SPECTRE_V2_USER_PRCTL:
-	case SPECTRE_V2_USER_SECCOMP:
-		update_indir_branch_cond();
-		break;
-	}
-
-	switch (mds_mitigation) {
-	case MDS_MITIGATION_FULL:
-	case MDS_MITIGATION_AUTO:
-	case MDS_MITIGATION_VMWERV:
-		if (sched_smt_active() && !boot_cpu_has(X86_BUG_MSBDS_ONLY))
-			pr_warn_once(MDS_MSG_SMT);
-		update_mds_branch_idle();
-		break;
-	case MDS_MITIGATION_OFF:
-		break;
-	}
-
-	switch (taa_mitigation) {
-	case TAA_MITIGATION_VERW:
-	case TAA_MITIGATION_AUTO:
-	case TAA_MITIGATION_UCODE_NEEDED:
-		if (sched_smt_active())
-			pr_warn_once(TAA_MSG_SMT);
-		break;
-	case TAA_MITIGATION_TSX_DISABLED:
-	case TAA_MITIGATION_OFF:
-		break;
-	}
-
-	switch (mmio_mitigation) {
-	case MMIO_MITIGATION_VERW:
-	case MMIO_MITIGATION_AUTO:
-	case MMIO_MITIGATION_UCODE_NEEDED:
-		if (sched_smt_active())
-			pr_warn_once(MMIO_MSG_SMT);
-		break;
-	case MMIO_MITIGATION_OFF:
-		break;
-	}
-
-	switch (tsa_mitigation) {
-	case TSA_MITIGATION_USER_KERNEL:
-	case TSA_MITIGATION_VM:
-	case TSA_MITIGATION_AUTO:
-	case TSA_MITIGATION_FULL:
-		/*
-		 * TSA-SQ can potentially lead to info leakage between
-		 * SMT threads.
-		 */
-		if (sched_smt_active())
-			static_branch_enable(&cpu_buf_idle_clear);
-		else
-			static_branch_disable(&cpu_buf_idle_clear);
-		break;
-	case TSA_MITIGATION_NONE:
-	case TSA_MITIGATION_UCODE_NEEDED:
-		break;
-	}
-
-	mutex_unlock(&spec_ctrl_mutex);
-}
-
 #undef pr_fmt
 #define pr_fmt(fmt)	"Speculative Store Bypass: " fmt
 
-static enum ssb_mitigation ssb_mode __ro_after_init = SPEC_STORE_BYPASS_NONE;
-
-/* The kernel command line selection */
-enum ssb_mitigation_cmd {
-	SPEC_STORE_BYPASS_CMD_NONE,
-	SPEC_STORE_BYPASS_CMD_AUTO,
-	SPEC_STORE_BYPASS_CMD_ON,
-	SPEC_STORE_BYPASS_CMD_PRCTL,
-	SPEC_STORE_BYPASS_CMD_SECCOMP,
-};
+static enum ssb_mitigation ssb_mode __ro_after_init =
+	IS_ENABLED(CONFIG_MITIGATION_SSB) ? SPEC_STORE_BYPASS_AUTO : SPEC_STORE_BYPASS_NONE;
 
 static const char * const ssb_strings[] = {
 	[SPEC_STORE_BYPASS_NONE]	= "Vulnerable",
@@ -2640,89 +2536,61 @@ static const char * const ssb_strings[] = {
 	[SPEC_STORE_BYPASS_SECCOMP]	= "Mitigation: Speculative Store Bypass disabled via prctl and seccomp",
 };
 
-static const struct {
-	const char *option;
-	enum ssb_mitigation_cmd cmd;
-} ssb_mitigation_options[]  __initconst = {
-	{ "auto",	SPEC_STORE_BYPASS_CMD_AUTO },    /* Platform decides */
-	{ "on",		SPEC_STORE_BYPASS_CMD_ON },      /* Disable Speculative Store Bypass */
-	{ "off",	SPEC_STORE_BYPASS_CMD_NONE },    /* Don't touch Speculative Store Bypass */
-	{ "prctl",	SPEC_STORE_BYPASS_CMD_PRCTL },   /* Disable Speculative Store Bypass via prctl */
-	{ "seccomp",	SPEC_STORE_BYPASS_CMD_SECCOMP }, /* Disable Speculative Store Bypass via prctl and seccomp */
-};
+static bool nossb __ro_after_init;
 
-static enum ssb_mitigation_cmd __init ssb_parse_cmdline(void)
+static int __init nossb_parse_cmdline(char *str)
 {
-	enum ssb_mitigation_cmd cmd;
-	char arg[20];
-	int ret, i;
-
-	cmd = IS_ENABLED(CONFIG_MITIGATION_SSB) ?
-		SPEC_STORE_BYPASS_CMD_AUTO : SPEC_STORE_BYPASS_CMD_NONE;
-	if (cmdline_find_option_bool(boot_command_line, "nospec_store_bypass_disable") ||
-	    cpu_mitigations_off()) {
-		return SPEC_STORE_BYPASS_CMD_NONE;
-	} else {
-		ret = cmdline_find_option(boot_command_line, "spec_store_bypass_disable",
-					  arg, sizeof(arg));
-		if (ret < 0)
-			return cmd;
+	nossb = true;
+	ssb_mode = SPEC_STORE_BYPASS_NONE;
+	return 0;
+}
+early_param("nospec_store_bypass_disable", nossb_parse_cmdline);
 
-		for (i = 0; i < ARRAY_SIZE(ssb_mitigation_options); i++) {
-			if (!match_option(arg, ret, ssb_mitigation_options[i].option))
-				continue;
+static int __init ssb_parse_cmdline(char *str)
+{
+	if (!str)
+		return -EINVAL;
 
-			cmd = ssb_mitigation_options[i].cmd;
-			break;
-		}
+	if (nossb)
+		return 0;
 
-		if (i >= ARRAY_SIZE(ssb_mitigation_options)) {
-			pr_err("unknown option (%s). Switching to default mode\n", arg);
-			return cmd;
-		}
-	}
+	if (!strcmp(str, "auto"))
+		ssb_mode = SPEC_STORE_BYPASS_AUTO;
+	else if (!strcmp(str, "on"))
+		ssb_mode = SPEC_STORE_BYPASS_DISABLE;
+	else if (!strcmp(str, "off"))
+		ssb_mode = SPEC_STORE_BYPASS_NONE;
+	else if (!strcmp(str, "prctl"))
+		ssb_mode = SPEC_STORE_BYPASS_PRCTL;
+	else if (!strcmp(str, "seccomp"))
+		ssb_mode = IS_ENABLED(CONFIG_SECCOMP) ?
+			SPEC_STORE_BYPASS_SECCOMP : SPEC_STORE_BYPASS_PRCTL;
+	else
+		pr_err("Ignoring unknown spec_store_bypass_disable option (%s).\n",
+			str);
 
-	return cmd;
+	return 0;
 }
+early_param("spec_store_bypass_disable", ssb_parse_cmdline);
 
 static void __init ssb_select_mitigation(void)
 {
-	enum ssb_mitigation_cmd cmd;
-
-	if (!boot_cpu_has(X86_FEATURE_SSBD))
-		goto out;
-
-	cmd = ssb_parse_cmdline();
-	if (!boot_cpu_has_bug(X86_BUG_SPEC_STORE_BYPASS) &&
-	    (cmd == SPEC_STORE_BYPASS_CMD_NONE ||
-	     cmd == SPEC_STORE_BYPASS_CMD_AUTO))
+	if (!boot_cpu_has_bug(X86_BUG_SPEC_STORE_BYPASS)) {
+		ssb_mode = SPEC_STORE_BYPASS_NONE;
 		return;
+	}
 
-	switch (cmd) {
-	case SPEC_STORE_BYPASS_CMD_SECCOMP:
-		/*
-		 * Choose prctl+seccomp as the default mode if seccomp is
-		 * enabled.
-		 */
-		if (IS_ENABLED(CONFIG_SECCOMP))
-			ssb_mode = SPEC_STORE_BYPASS_SECCOMP;
-		else
+	if (ssb_mode == SPEC_STORE_BYPASS_AUTO) {
+		if (should_mitigate_vuln(X86_BUG_SPEC_STORE_BYPASS))
 			ssb_mode = SPEC_STORE_BYPASS_PRCTL;
-		break;
-	case SPEC_STORE_BYPASS_CMD_ON:
-		ssb_mode = SPEC_STORE_BYPASS_DISABLE;
-		break;
-	case SPEC_STORE_BYPASS_CMD_AUTO:
-	case SPEC_STORE_BYPASS_CMD_PRCTL:
-		ssb_mode = SPEC_STORE_BYPASS_PRCTL;
-		break;
-	case SPEC_STORE_BYPASS_CMD_NONE:
-		break;
+		else
+			ssb_mode = SPEC_STORE_BYPASS_NONE;
 	}
 
-out:
-	if (boot_cpu_has_bug(X86_BUG_SPEC_STORE_BYPASS))
-		pr_info("%s\n", ssb_strings[ssb_mode]);
+	if (!boot_cpu_has(X86_FEATURE_SSBD))
+		ssb_mode = SPEC_STORE_BYPASS_NONE;
+
+	pr_info("%s\n", ssb_strings[ssb_mode]);
 }
 
 static void __init ssb_apply_mitigation(void)
@@ -2938,6 +2806,7 @@ static int ssb_prctl_get(struct task_struct *task)
 		return PR_SPEC_DISABLE;
 	case SPEC_STORE_BYPASS_SECCOMP:
 	case SPEC_STORE_BYPASS_PRCTL:
+	case SPEC_STORE_BYPASS_AUTO:
 		if (task_spec_ssb_force_disable(task))
 			return PR_SPEC_PRCTL | PR_SPEC_FORCE_DISABLE;
 		if (task_spec_ssb_noexec(task))
@@ -3184,8 +3053,18 @@ static void __init srso_select_mitigation(void)
 	}
 
 	if (srso_mitigation == SRSO_MITIGATION_AUTO) {
-		if (should_mitigate_vuln(X86_BUG_SRSO)) {
+		/*
+		 * Use safe-RET if user->kernel or guest->host protection is
+		 * required.  Otherwise the 'microcode' mitigation is sufficient
+		 * to protect the user->user and guest->guest vectors.
+		 */
+		if (cpu_attack_vector_mitigated(CPU_MITIGATE_GUEST_HOST) ||
+		    (cpu_attack_vector_mitigated(CPU_MITIGATE_USER_KERNEL) &&
+		     !boot_cpu_has(X86_FEATURE_SRSO_USER_KERNEL_NO))) {
 			srso_mitigation = SRSO_MITIGATION_SAFE_RET;
+		} else if (cpu_attack_vector_mitigated(CPU_MITIGATE_USER_USER) ||
+			   cpu_attack_vector_mitigated(CPU_MITIGATE_GUEST_GUEST)) {
+			srso_mitigation = SRSO_MITIGATION_MICROCODE;
 		} else {
 			srso_mitigation = SRSO_MITIGATION_NONE;
 			return;
@@ -3247,14 +3126,15 @@ ibpb_on_vmexit:
 
 static void __init srso_update_mitigation(void)
 {
+	if (!boot_cpu_has_bug(X86_BUG_SRSO))
+		return;
+
 	/* If retbleed is using IBPB, that works for SRSO as well */
 	if (retbleed_mitigation == RETBLEED_MITIGATION_IBPB &&
 	    boot_cpu_has(X86_FEATURE_IBPB_BRTYPE))
 		srso_mitigation = SRSO_MITIGATION_IBPB;
 
-	if (boot_cpu_has_bug(X86_BUG_SRSO) &&
-	    !cpu_mitigations_off())
-		pr_info("%s\n", srso_strings[srso_mitigation]);
+	pr_info("%s\n", srso_strings[srso_mitigation]);
 }
 
 static void __init srso_apply_mitigation(void)
@@ -3315,8 +3195,187 @@ static void __init srso_apply_mitigation(void)
 }
 
 #undef pr_fmt
+#define pr_fmt(fmt)	"VMSCAPE: " fmt
+
+enum vmscape_mitigations {
+	VMSCAPE_MITIGATION_NONE,
+	VMSCAPE_MITIGATION_AUTO,
+	VMSCAPE_MITIGATION_IBPB_EXIT_TO_USER,
+	VMSCAPE_MITIGATION_IBPB_ON_VMEXIT,
+};
+
+static const char * const vmscape_strings[] = {
+	[VMSCAPE_MITIGATION_NONE]		= "Vulnerable",
+	/* [VMSCAPE_MITIGATION_AUTO] */
+	[VMSCAPE_MITIGATION_IBPB_EXIT_TO_USER]	= "Mitigation: IBPB before exit to userspace",
+	[VMSCAPE_MITIGATION_IBPB_ON_VMEXIT]	= "Mitigation: IBPB on VMEXIT",
+};
+
+static enum vmscape_mitigations vmscape_mitigation __ro_after_init =
+	IS_ENABLED(CONFIG_MITIGATION_VMSCAPE) ? VMSCAPE_MITIGATION_AUTO : VMSCAPE_MITIGATION_NONE;
+
+static int __init vmscape_parse_cmdline(char *str)
+{
+	if (!str)
+		return -EINVAL;
+
+	if (!strcmp(str, "off")) {
+		vmscape_mitigation = VMSCAPE_MITIGATION_NONE;
+	} else if (!strcmp(str, "ibpb")) {
+		vmscape_mitigation = VMSCAPE_MITIGATION_IBPB_EXIT_TO_USER;
+	} else if (!strcmp(str, "force")) {
+		setup_force_cpu_bug(X86_BUG_VMSCAPE);
+		vmscape_mitigation = VMSCAPE_MITIGATION_AUTO;
+	} else {
+		pr_err("Ignoring unknown vmscape=%s option.\n", str);
+	}
+
+	return 0;
+}
+early_param("vmscape", vmscape_parse_cmdline);
+
+static void __init vmscape_select_mitigation(void)
+{
+	if (!boot_cpu_has_bug(X86_BUG_VMSCAPE) ||
+	    !boot_cpu_has(X86_FEATURE_IBPB)) {
+		vmscape_mitigation = VMSCAPE_MITIGATION_NONE;
+		return;
+	}
+
+	if (vmscape_mitigation == VMSCAPE_MITIGATION_AUTO) {
+		if (should_mitigate_vuln(X86_BUG_VMSCAPE))
+			vmscape_mitigation = VMSCAPE_MITIGATION_IBPB_EXIT_TO_USER;
+		else
+			vmscape_mitigation = VMSCAPE_MITIGATION_NONE;
+	}
+}
+
+static void __init vmscape_update_mitigation(void)
+{
+	if (!boot_cpu_has_bug(X86_BUG_VMSCAPE))
+		return;
+
+	if (retbleed_mitigation == RETBLEED_MITIGATION_IBPB ||
+	    srso_mitigation == SRSO_MITIGATION_IBPB_ON_VMEXIT)
+		vmscape_mitigation = VMSCAPE_MITIGATION_IBPB_ON_VMEXIT;
+
+	pr_info("%s\n", vmscape_strings[vmscape_mitigation]);
+}
+
+static void __init vmscape_apply_mitigation(void)
+{
+	if (vmscape_mitigation == VMSCAPE_MITIGATION_IBPB_EXIT_TO_USER)
+		setup_force_cpu_cap(X86_FEATURE_IBPB_EXIT_TO_USER);
+}
+
+#undef pr_fmt
 #define pr_fmt(fmt) fmt
 
+#define MDS_MSG_SMT "MDS CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/mds.html for more details.\n"
+#define TAA_MSG_SMT "TAA CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/tsx_async_abort.html for more details.\n"
+#define MMIO_MSG_SMT "MMIO Stale Data CPU bug present and SMT on, data leak possible. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/processor_mmio_stale_data.html for more details.\n"
+#define VMSCAPE_MSG_SMT "VMSCAPE: SMT on, STIBP is required for full protection. See https://www.kernel.org/doc/html/latest/admin-guide/hw-vuln/vmscape.html for more details.\n"
+
+void cpu_bugs_smt_update(void)
+{
+	mutex_lock(&spec_ctrl_mutex);
+
+	if (sched_smt_active() && unprivileged_ebpf_enabled() &&
+	    spectre_v2_enabled == SPECTRE_V2_EIBRS_LFENCE)
+		pr_warn_once(SPECTRE_V2_EIBRS_LFENCE_EBPF_SMT_MSG);
+
+	switch (spectre_v2_user_stibp) {
+	case SPECTRE_V2_USER_NONE:
+		break;
+	case SPECTRE_V2_USER_STRICT:
+	case SPECTRE_V2_USER_STRICT_PREFERRED:
+		update_stibp_strict();
+		break;
+	case SPECTRE_V2_USER_PRCTL:
+	case SPECTRE_V2_USER_SECCOMP:
+		update_indir_branch_cond();
+		break;
+	}
+
+	switch (mds_mitigation) {
+	case MDS_MITIGATION_FULL:
+	case MDS_MITIGATION_AUTO:
+	case MDS_MITIGATION_VMWERV:
+		if (sched_smt_active() && !boot_cpu_has(X86_BUG_MSBDS_ONLY))
+			pr_warn_once(MDS_MSG_SMT);
+		update_mds_branch_idle();
+		break;
+	case MDS_MITIGATION_OFF:
+		break;
+	}
+
+	switch (taa_mitigation) {
+	case TAA_MITIGATION_VERW:
+	case TAA_MITIGATION_AUTO:
+	case TAA_MITIGATION_UCODE_NEEDED:
+		if (sched_smt_active())
+			pr_warn_once(TAA_MSG_SMT);
+		break;
+	case TAA_MITIGATION_TSX_DISABLED:
+	case TAA_MITIGATION_OFF:
+		break;
+	}
+
+	switch (mmio_mitigation) {
+	case MMIO_MITIGATION_VERW:
+	case MMIO_MITIGATION_AUTO:
+	case MMIO_MITIGATION_UCODE_NEEDED:
+		if (sched_smt_active())
+			pr_warn_once(MMIO_MSG_SMT);
+		break;
+	case MMIO_MITIGATION_OFF:
+		break;
+	}
+
+	switch (tsa_mitigation) {
+	case TSA_MITIGATION_USER_KERNEL:
+	case TSA_MITIGATION_VM:
+	case TSA_MITIGATION_AUTO:
+	case TSA_MITIGATION_FULL:
+		/*
+		 * TSA-SQ can potentially lead to info leakage between
+		 * SMT threads.
+		 */
+		if (sched_smt_active())
+			static_branch_enable(&cpu_buf_idle_clear);
+		else
+			static_branch_disable(&cpu_buf_idle_clear);
+		break;
+	case TSA_MITIGATION_NONE:
+	case TSA_MITIGATION_UCODE_NEEDED:
+		break;
+	}
+
+	switch (vmscape_mitigation) {
+	case VMSCAPE_MITIGATION_NONE:
+	case VMSCAPE_MITIGATION_AUTO:
+		break;
+	case VMSCAPE_MITIGATION_IBPB_ON_VMEXIT:
+	case VMSCAPE_MITIGATION_IBPB_EXIT_TO_USER:
+		/*
+		 * Hypervisors can be attacked across-threads, warn for SMT when
+		 * STIBP is not already enabled system-wide.
+		 *
+		 * Intel eIBRS (!AUTOIBRS) implies STIBP on.
+		 */
+		if (!sched_smt_active() ||
+		    spectre_v2_user_stibp == SPECTRE_V2_USER_STRICT ||
+		    spectre_v2_user_stibp == SPECTRE_V2_USER_STRICT_PREFERRED ||
+		    (spectre_v2_in_eibrs_mode(spectre_v2_enabled) &&
+		     !boot_cpu_has(X86_FEATURE_AUTOIBRS)))
+			break;
+		pr_warn_once(VMSCAPE_MSG_SMT);
+		break;
+	}
+
+	mutex_unlock(&spec_ctrl_mutex);
+}
+
 #ifdef CONFIG_SYSFS
 
 #define L1TF_DEFAULT_MSG "Mitigation: PTE Inversion"
@@ -3502,9 +3561,6 @@ static const char *spectre_bhi_state(void)
 
 static ssize_t spectre_v2_show_state(char *buf)
 {
-	if (spectre_v2_enabled == SPECTRE_V2_LFENCE)
-		return sysfs_emit(buf, "Vulnerable: LFENCE\n");
-
 	if (spectre_v2_enabled == SPECTRE_V2_EIBRS && unprivileged_ebpf_enabled())
 		return sysfs_emit(buf, "Vulnerable: eIBRS with unprivileged eBPF\n");
 
@@ -3562,6 +3618,11 @@ static ssize_t tsa_show_state(char *buf)
 	return sysfs_emit(buf, "%s\n", tsa_strings[tsa_mitigation]);
 }
 
+static ssize_t vmscape_show_state(char *buf)
+{
+	return sysfs_emit(buf, "%s\n", vmscape_strings[vmscape_mitigation]);
+}
+
 static ssize_t cpu_show_common(struct device *dev, struct device_attribute *attr,
 			       char *buf, unsigned int bug)
 {
@@ -3628,6 +3689,9 @@ static ssize_t cpu_show_common(struct device *dev, struct device_attribute *attr
 	case X86_BUG_TSA:
 		return tsa_show_state(buf);
 
+	case X86_BUG_VMSCAPE:
+		return vmscape_show_state(buf);
+
 	default:
 		break;
 	}
@@ -3719,6 +3783,11 @@ ssize_t cpu_show_tsa(struct device *dev, struct device_attribute *attr, char *bu
 {
 	return cpu_show_common(dev, attr, buf, X86_BUG_TSA);
 }
+
+ssize_t cpu_show_vmscape(struct device *dev, struct device_attribute *attr, char *buf)
+{
+	return cpu_show_common(dev, attr, buf, X86_BUG_VMSCAPE);
+}
 #endif
 
 void __warn_thunk(void)
diff --git a/arch/x86/kernel/cpu/cacheinfo.c b/arch/x86/kernel/cpu/cacheinfo.c
index adfa7e8bb865..51a95b07831f 100644
--- a/arch/x86/kernel/cpu/cacheinfo.c
+++ b/arch/x86/kernel/cpu/cacheinfo.c
@@ -290,6 +290,22 @@ static int find_num_cache_leaves(struct cpuinfo_x86 *c)
 }
 
 /*
+ * The max shared threads number comes from CPUID(0x4) EAX[25-14] with input
+ * ECX as cache index. Then right shift apicid by the number's order to get
+ * cache id for this cache node.
+ */
+static unsigned int get_cache_id(u32 apicid, const struct _cpuid4_info *id4)
+{
+	unsigned long num_threads_sharing;
+	int index_msb;
+
+	num_threads_sharing = 1 + id4->eax.split.num_threads_sharing;
+	index_msb = get_count_order(num_threads_sharing);
+
+	return apicid >> index_msb;
+}
+
+/*
  * AMD/Hygon CPUs may have multiple LLCs if L3 caches exist.
  */
 
@@ -312,18 +328,11 @@ void cacheinfo_amd_init_llc_id(struct cpuinfo_x86 *c, u16 die_id)
 		 * Newer families: LLC ID is calculated from the number
 		 * of threads sharing the L3 cache.
 		 */
-		u32 eax, ebx, ecx, edx, num_sharing_cache = 0;
 		u32 llc_index = find_num_cache_leaves(c) - 1;
+		struct _cpuid4_info id4 = {};
 
-		cpuid_count(0x8000001d, llc_index, &eax, &ebx, &ecx, &edx);
-		if (eax)
-			num_sharing_cache = ((eax >> 14) & 0xfff) + 1;
-
-		if (num_sharing_cache) {
-			int index_msb = get_count_order(num_sharing_cache);
-
-			c->topo.llc_id = c->topo.apicid >> index_msb;
-		}
+		if (!amd_fill_cpuid4_info(llc_index, &id4))
+			c->topo.llc_id = get_cache_id(c->topo.apicid, &id4);
 	}
 }
 
@@ -598,27 +607,12 @@ int init_cache_level(unsigned int cpu)
 	return 0;
 }
 
-/*
- * The max shared threads number comes from CPUID(0x4) EAX[25-14] with input
- * ECX as cache index. Then right shift apicid by the number's order to get
- * cache id for this cache node.
- */
-static void get_cache_id(int cpu, struct _cpuid4_info *id4)
-{
-	struct cpuinfo_x86 *c = &cpu_data(cpu);
-	unsigned long num_threads_sharing;
-	int index_msb;
-
-	num_threads_sharing = 1 + id4->eax.split.num_threads_sharing;
-	index_msb = get_count_order(num_threads_sharing);
-	id4->id = c->topo.apicid >> index_msb;
-}
-
 int populate_cache_leaves(unsigned int cpu)
 {
 	struct cpu_cacheinfo *this_cpu_ci = get_cpu_cacheinfo(cpu);
 	struct cacheinfo *ci = this_cpu_ci->info_list;
 	u8 cpu_vendor = boot_cpu_data.x86_vendor;
+	u32 apicid = cpu_data(cpu).topo.apicid;
 	struct amd_northbridge *nb = NULL;
 	struct _cpuid4_info id4 = {};
 	int idx, ret;
@@ -628,7 +622,7 @@ int populate_cache_leaves(unsigned int cpu)
 		if (ret)
 			return ret;
 
-		get_cache_id(cpu, &id4);
+		id4.id = get_cache_id(apicid, &id4);
 
 		if (cpu_vendor == X86_VENDOR_AMD || cpu_vendor == X86_VENDOR_HYGON)
 			nb = amd_init_l3_cache(idx);
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index 34a054181c4d..c7d3512914ca 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1236,55 +1236,71 @@ static const __initconst struct x86_cpu_id cpu_vuln_whitelist[] = {
 #define ITS_NATIVE_ONLY	BIT(9)
 /* CPU is affected by Transient Scheduler Attacks */
 #define TSA		BIT(10)
+/* CPU is affected by VMSCAPE */
+#define VMSCAPE		BIT(11)
 
 static const struct x86_cpu_id cpu_vuln_blacklist[] __initconst = {
-	VULNBL_INTEL_STEPS(INTEL_IVYBRIDGE,	     X86_STEP_MAX,	SRBDS),
-	VULNBL_INTEL_STEPS(INTEL_HASWELL,	     X86_STEP_MAX,	SRBDS),
-	VULNBL_INTEL_STEPS(INTEL_HASWELL_L,	     X86_STEP_MAX,	SRBDS),
-	VULNBL_INTEL_STEPS(INTEL_HASWELL_G,	     X86_STEP_MAX,	SRBDS),
-	VULNBL_INTEL_STEPS(INTEL_HASWELL_X,	     X86_STEP_MAX,	MMIO),
-	VULNBL_INTEL_STEPS(INTEL_BROADWELL_D,	     X86_STEP_MAX,	MMIO),
-	VULNBL_INTEL_STEPS(INTEL_BROADWELL_G,	     X86_STEP_MAX,	SRBDS),
-	VULNBL_INTEL_STEPS(INTEL_BROADWELL_X,	     X86_STEP_MAX,	MMIO),
-	VULNBL_INTEL_STEPS(INTEL_BROADWELL,	     X86_STEP_MAX,	SRBDS),
-	VULNBL_INTEL_STEPS(INTEL_SKYLAKE_X,		      0x5,	MMIO | RETBLEED | GDS),
-	VULNBL_INTEL_STEPS(INTEL_SKYLAKE_X,	     X86_STEP_MAX,	MMIO | RETBLEED | GDS | ITS),
-	VULNBL_INTEL_STEPS(INTEL_SKYLAKE_L,	     X86_STEP_MAX,	MMIO | RETBLEED | GDS | SRBDS),
-	VULNBL_INTEL_STEPS(INTEL_SKYLAKE,	     X86_STEP_MAX,	MMIO | RETBLEED | GDS | SRBDS),
-	VULNBL_INTEL_STEPS(INTEL_KABYLAKE_L,		      0xb,	MMIO | RETBLEED | GDS | SRBDS),
-	VULNBL_INTEL_STEPS(INTEL_KABYLAKE_L,	     X86_STEP_MAX,	MMIO | RETBLEED | GDS | SRBDS | ITS),
-	VULNBL_INTEL_STEPS(INTEL_KABYLAKE,		      0xc,	MMIO | RETBLEED | GDS | SRBDS),
-	VULNBL_INTEL_STEPS(INTEL_KABYLAKE,	     X86_STEP_MAX,	MMIO | RETBLEED | GDS | SRBDS | ITS),
-	VULNBL_INTEL_STEPS(INTEL_CANNONLAKE_L,	     X86_STEP_MAX,	RETBLEED),
+	VULNBL_INTEL_STEPS(INTEL_SANDYBRIDGE_X,	     X86_STEP_MAX,	VMSCAPE),
+	VULNBL_INTEL_STEPS(INTEL_SANDYBRIDGE,	     X86_STEP_MAX,	VMSCAPE),
+	VULNBL_INTEL_STEPS(INTEL_IVYBRIDGE_X,	     X86_STEP_MAX,	VMSCAPE),
+	VULNBL_INTEL_STEPS(INTEL_IVYBRIDGE,	     X86_STEP_MAX,	SRBDS | VMSCAPE),
+	VULNBL_INTEL_STEPS(INTEL_HASWELL,	     X86_STEP_MAX,	SRBDS | VMSCAPE),
+	VULNBL_INTEL_STEPS(INTEL_HASWELL_L,	     X86_STEP_MAX,	SRBDS | VMSCAPE),
+	VULNBL_INTEL_STEPS(INTEL_HASWELL_G,	     X86_STEP_MAX,	SRBDS | VMSCAPE),
+	VULNBL_INTEL_STEPS(INTEL_HASWELL_X,	     X86_STEP_MAX,	MMIO | VMSCAPE),
+	VULNBL_INTEL_STEPS(INTEL_BROADWELL_D,	     X86_STEP_MAX,	MMIO | VMSCAPE),
+	VULNBL_INTEL_STEPS(INTEL_BROADWELL_X,	     X86_STEP_MAX,	MMIO | VMSCAPE),
+	VULNBL_INTEL_STEPS(INTEL_BROADWELL_G,	     X86_STEP_MAX,	SRBDS | VMSCAPE),
+	VULNBL_INTEL_STEPS(INTEL_BROADWELL,	     X86_STEP_MAX,	SRBDS | VMSCAPE),
+	VULNBL_INTEL_STEPS(INTEL_SKYLAKE_X,		      0x5,	MMIO | RETBLEED | GDS | VMSCAPE),
+	VULNBL_INTEL_STEPS(INTEL_SKYLAKE_X,	     X86_STEP_MAX,	MMIO | RETBLEED | GDS | ITS | VMSCAPE),
+	VULNBL_INTEL_STEPS(INTEL_SKYLAKE_L,	     X86_STEP_MAX,	MMIO | RETBLEED | GDS | SRBDS | VMSCAPE),
+	VULNBL_INTEL_STEPS(INTEL_SKYLAKE,	     X86_STEP_MAX,	MMIO | RETBLEED | GDS | SRBDS | VMSCAPE),
+	VULNBL_INTEL_STEPS(INTEL_KABYLAKE_L,		      0xb,	MMIO | RETBLEED | GDS | SRBDS | VMSCAPE),
+	VULNBL_INTEL_STEPS(INTEL_KABYLAKE_L,	     X86_STEP_MAX,	MMIO | RETBLEED | GDS | SRBDS | ITS | VMSCAPE),
+	VULNBL_INTEL_STEPS(INTEL_KABYLAKE,		      0xc,	MMIO | RETBLEED | GDS | SRBDS | VMSCAPE),
+	VULNBL_INTEL_STEPS(INTEL_KABYLAKE,	     X86_STEP_MAX,	MMIO | RETBLEED | GDS | SRBDS | ITS | VMSCAPE),
+	VULNBL_INTEL_STEPS(INTEL_CANNONLAKE_L,	     X86_STEP_MAX,	RETBLEED | VMSCAPE),
 	VULNBL_INTEL_STEPS(INTEL_ICELAKE_L,	     X86_STEP_MAX,	MMIO | MMIO_SBDS | RETBLEED | GDS | ITS | ITS_NATIVE_ONLY),
 	VULNBL_INTEL_STEPS(INTEL_ICELAKE_D,	     X86_STEP_MAX,	MMIO | GDS | ITS | ITS_NATIVE_ONLY),
 	VULNBL_INTEL_STEPS(INTEL_ICELAKE_X,	     X86_STEP_MAX,	MMIO | GDS | ITS | ITS_NATIVE_ONLY),
-	VULNBL_INTEL_STEPS(INTEL_COMETLAKE,	     X86_STEP_MAX,	MMIO | MMIO_SBDS | RETBLEED | GDS | ITS),
-	VULNBL_INTEL_STEPS(INTEL_COMETLAKE_L,		      0x0,	MMIO | RETBLEED | ITS),
-	VULNBL_INTEL_STEPS(INTEL_COMETLAKE_L,	     X86_STEP_MAX,	MMIO | MMIO_SBDS | RETBLEED | GDS | ITS),
+	VULNBL_INTEL_STEPS(INTEL_COMETLAKE,	     X86_STEP_MAX,	MMIO | MMIO_SBDS | RETBLEED | GDS | ITS | VMSCAPE),
+	VULNBL_INTEL_STEPS(INTEL_COMETLAKE_L,		      0x0,	MMIO | RETBLEED | ITS | VMSCAPE),
+	VULNBL_INTEL_STEPS(INTEL_COMETLAKE_L,	     X86_STEP_MAX,	MMIO | MMIO_SBDS | RETBLEED | GDS | ITS | VMSCAPE),
 	VULNBL_INTEL_STEPS(INTEL_TIGERLAKE_L,	     X86_STEP_MAX,	GDS | ITS | ITS_NATIVE_ONLY),
 	VULNBL_INTEL_STEPS(INTEL_TIGERLAKE,	     X86_STEP_MAX,	GDS | ITS | ITS_NATIVE_ONLY),
 	VULNBL_INTEL_STEPS(INTEL_LAKEFIELD,	     X86_STEP_MAX,	MMIO | MMIO_SBDS | RETBLEED),
 	VULNBL_INTEL_STEPS(INTEL_ROCKETLAKE,	     X86_STEP_MAX,	MMIO | RETBLEED | GDS | ITS | ITS_NATIVE_ONLY),
-	VULNBL_INTEL_TYPE(INTEL_ALDERLAKE,		     ATOM,	RFDS),
-	VULNBL_INTEL_STEPS(INTEL_ALDERLAKE_L,	     X86_STEP_MAX,	RFDS),
-	VULNBL_INTEL_TYPE(INTEL_RAPTORLAKE,		     ATOM,	RFDS),
-	VULNBL_INTEL_STEPS(INTEL_RAPTORLAKE_P,	     X86_STEP_MAX,	RFDS),
-	VULNBL_INTEL_STEPS(INTEL_RAPTORLAKE_S,	     X86_STEP_MAX,	RFDS),
-	VULNBL_INTEL_STEPS(INTEL_ATOM_GRACEMONT,     X86_STEP_MAX,	RFDS),
+	VULNBL_INTEL_TYPE(INTEL_ALDERLAKE,		     ATOM,	RFDS | VMSCAPE),
+	VULNBL_INTEL_STEPS(INTEL_ALDERLAKE,	     X86_STEP_MAX,	VMSCAPE),
+	VULNBL_INTEL_STEPS(INTEL_ALDERLAKE_L,	     X86_STEP_MAX,	RFDS | VMSCAPE),
+	VULNBL_INTEL_TYPE(INTEL_RAPTORLAKE,		     ATOM,	RFDS | VMSCAPE),
+	VULNBL_INTEL_STEPS(INTEL_RAPTORLAKE,	     X86_STEP_MAX,	VMSCAPE),
+	VULNBL_INTEL_STEPS(INTEL_RAPTORLAKE_P,	     X86_STEP_MAX,	RFDS | VMSCAPE),
+	VULNBL_INTEL_STEPS(INTEL_RAPTORLAKE_S,	     X86_STEP_MAX,	RFDS | VMSCAPE),
+	VULNBL_INTEL_STEPS(INTEL_METEORLAKE_L,	     X86_STEP_MAX,	VMSCAPE),
+	VULNBL_INTEL_STEPS(INTEL_ARROWLAKE_H,	     X86_STEP_MAX,	VMSCAPE),
+	VULNBL_INTEL_STEPS(INTEL_ARROWLAKE,	     X86_STEP_MAX,	VMSCAPE),
+	VULNBL_INTEL_STEPS(INTEL_ARROWLAKE_U,	     X86_STEP_MAX,	VMSCAPE),
+	VULNBL_INTEL_STEPS(INTEL_LUNARLAKE_M,	     X86_STEP_MAX,	VMSCAPE),
+	VULNBL_INTEL_STEPS(INTEL_SAPPHIRERAPIDS_X,   X86_STEP_MAX,	VMSCAPE),
+	VULNBL_INTEL_STEPS(INTEL_GRANITERAPIDS_X,    X86_STEP_MAX,	VMSCAPE),
+	VULNBL_INTEL_STEPS(INTEL_EMERALDRAPIDS_X,    X86_STEP_MAX,	VMSCAPE),
+	VULNBL_INTEL_STEPS(INTEL_ATOM_GRACEMONT,     X86_STEP_MAX,	RFDS | VMSCAPE),
 	VULNBL_INTEL_STEPS(INTEL_ATOM_TREMONT,	     X86_STEP_MAX,	MMIO | MMIO_SBDS | RFDS),
 	VULNBL_INTEL_STEPS(INTEL_ATOM_TREMONT_D,     X86_STEP_MAX,	MMIO | RFDS),
 	VULNBL_INTEL_STEPS(INTEL_ATOM_TREMONT_L,     X86_STEP_MAX,	MMIO | MMIO_SBDS | RFDS),
 	VULNBL_INTEL_STEPS(INTEL_ATOM_GOLDMONT,      X86_STEP_MAX,	RFDS),
 	VULNBL_INTEL_STEPS(INTEL_ATOM_GOLDMONT_D,    X86_STEP_MAX,	RFDS),
 	VULNBL_INTEL_STEPS(INTEL_ATOM_GOLDMONT_PLUS, X86_STEP_MAX,	RFDS),
+	VULNBL_INTEL_STEPS(INTEL_ATOM_CRESTMONT_X,   X86_STEP_MAX,	VMSCAPE),
 
 	VULNBL_AMD(0x15, RETBLEED),
 	VULNBL_AMD(0x16, RETBLEED),
-	VULNBL_AMD(0x17, RETBLEED | SMT_RSB | SRSO),
-	VULNBL_HYGON(0x18, RETBLEED | SMT_RSB | SRSO),
-	VULNBL_AMD(0x19, SRSO | TSA),
-	VULNBL_AMD(0x1a, SRSO),
+	VULNBL_AMD(0x17, RETBLEED | SMT_RSB | SRSO | VMSCAPE),
+	VULNBL_HYGON(0x18, RETBLEED | SMT_RSB | SRSO | VMSCAPE),
+	VULNBL_AMD(0x19, SRSO | TSA | VMSCAPE),
+	VULNBL_AMD(0x1a, SRSO | VMSCAPE),
 	{}
 };
 
@@ -1543,6 +1559,14 @@ static void __init cpu_set_bug_bits(struct cpuinfo_x86 *c)
 		}
 	}
 
+	/*
+	 * Set the bug only on bare-metal. A nested hypervisor should already be
+	 * deploying IBPB to isolate itself from nested guests.
+	 */
+	if (cpu_matches(cpu_vuln_blacklist, VMSCAPE) &&
+	    !boot_cpu_has(X86_FEATURE_HYPERVISOR))
+		setup_force_cpu_bug(X86_BUG_VMSCAPE);
+
 	if (cpu_matches(cpu_vuln_whitelist, NO_MELTDOWN))
 		return;
 
@@ -1784,6 +1808,7 @@ static void __init early_identify_cpu(struct cpuinfo_x86 *c)
 		setup_clear_cpu_cap(X86_FEATURE_LA57);
 
 	detect_nopl();
+	mca_bsp_init(c);
 }
 
 void __init init_cpu_devs(void)
diff --git a/arch/x86/kernel/cpu/hygon.c b/arch/x86/kernel/cpu/hygon.c
index 2154f12766fb..1fda6c3a2b65 100644
--- a/arch/x86/kernel/cpu/hygon.c
+++ b/arch/x86/kernel/cpu/hygon.c
@@ -16,6 +16,7 @@
 #include <asm/spec-ctrl.h>
 #include <asm/delay.h>
 #include <asm/msr.h>
+#include <asm/resctrl.h>
 
 #include "cpu.h"
 
@@ -117,6 +118,8 @@ static void bsp_init_hygon(struct cpuinfo_x86 *c)
 			x86_amd_ls_cfg_ssbd_mask = 1ULL << 10;
 		}
 	}
+
+	resctrl_cpu_detect(c);
 }
 
 static void early_init_hygon(struct cpuinfo_x86 *c)
diff --git a/arch/x86/kernel/cpu/hypervisor.c b/arch/x86/kernel/cpu/hypervisor.c
index 553bfbfc3a1b..f3e9219845e8 100644
--- a/arch/x86/kernel/cpu/hypervisor.c
+++ b/arch/x86/kernel/cpu/hypervisor.c
@@ -45,6 +45,9 @@ static const __initconst struct hypervisor_x86 * const hypervisors[] =
 #ifdef CONFIG_ACRN_GUEST
 	&x86_hyper_acrn,
 #endif
+#ifdef CONFIG_BHYVE_GUEST
+	&x86_hyper_bhyve,
+#endif
 };
 
 enum x86_hypervisor_type x86_hyper_type;
diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c
index 076eaa41b8c8..98ae4c37c93e 100644
--- a/arch/x86/kernel/cpu/intel.c
+++ b/arch/x86/kernel/cpu/intel.c
@@ -262,7 +262,7 @@ static void early_init_intel(struct cpuinfo_x86 *c)
 	if (c->x86_power & (1 << 8)) {
 		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
 		set_cpu_cap(c, X86_FEATURE_NONSTOP_TSC);
-	} else if ((c->x86_vfm >= INTEL_P4_PRESCOTT && c->x86_vfm <= INTEL_P4_WILLAMETTE) ||
+	} else if ((c->x86_vfm >= INTEL_P4_PRESCOTT && c->x86_vfm <= INTEL_P4_CEDARMILL) ||
 		   (c->x86_vfm >= INTEL_CORE_YONAH  && c->x86_vfm <= INTEL_IVYBRIDGE)) {
 		set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
 	}
diff --git a/arch/x86/kernel/cpu/mce/amd.c b/arch/x86/kernel/cpu/mce/amd.c
index 5c4eb28c3ac9..d6906442f49b 100644
--- a/arch/x86/kernel/cpu/mce/amd.c
+++ b/arch/x86/kernel/cpu/mce/amd.c
@@ -241,7 +241,8 @@ struct threshold_block {
 
 struct threshold_bank {
 	struct kobject		*kobj;
-	struct threshold_block	*blocks;
+	/* List of threshold blocks within this MCA bank. */
+	struct list_head	miscj;
 };
 
 static DEFINE_PER_CPU(struct threshold_bank **, threshold_banks);
@@ -252,9 +253,6 @@ static DEFINE_PER_CPU(struct threshold_bank **, threshold_banks);
  */
 static DEFINE_PER_CPU(u64, bank_map);
 
-/* Map of banks that have more than MCA_MISC0 available. */
-static DEFINE_PER_CPU(u64, smca_misc_banks_map);
-
 static void amd_threshold_interrupt(void);
 static void amd_deferred_error_interrupt(void);
 
@@ -264,28 +262,6 @@ static void default_deferred_error_interrupt(void)
 }
 void (*deferred_error_int_vector)(void) = default_deferred_error_interrupt;
 
-static void smca_set_misc_banks_map(unsigned int bank, unsigned int cpu)
-{
-	u32 low, high;
-
-	/*
-	 * For SMCA enabled processors, BLKPTR field of the first MISC register
-	 * (MCx_MISC0) indicates presence of additional MISC regs set (MISC1-4).
-	 */
-	if (rdmsr_safe(MSR_AMD64_SMCA_MCx_CONFIG(bank), &low, &high))
-		return;
-
-	if (!(low & MCI_CONFIG_MCAX))
-		return;
-
-	if (rdmsr_safe(MSR_AMD64_SMCA_MCx_MISC(bank), &low, &high))
-		return;
-
-	if (low & MASK_BLKPTR_LO)
-		per_cpu(smca_misc_banks_map, cpu) |= BIT_ULL(bank);
-
-}
-
 static void smca_configure(unsigned int bank, unsigned int cpu)
 {
 	u8 *bank_counts = this_cpu_ptr(smca_bank_counts);
@@ -326,8 +302,6 @@ static void smca_configure(unsigned int bank, unsigned int cpu)
 		wrmsr(smca_config, low, high);
 	}
 
-	smca_set_misc_banks_map(bank, cpu);
-
 	if (rdmsr_safe(MSR_AMD64_SMCA_MCx_IPID(bank), &low, &high)) {
 		pr_warn("Failed to read MCA_IPID for bank %d\n", bank);
 		return;
@@ -419,8 +393,8 @@ static bool lvt_off_valid(struct threshold_block *b, int apic, u32 lo, u32 hi)
 	return true;
 };
 
-/* Reprogram MCx_MISC MSR behind this threshold bank. */
-static void threshold_restart_bank(void *_tr)
+/* Reprogram MCx_MISC MSR behind this threshold block. */
+static void threshold_restart_block(void *_tr)
 {
 	struct thresh_restart *tr = _tr;
 	u32 hi, lo;
@@ -478,7 +452,7 @@ static void mce_threshold_block_init(struct threshold_block *b, int offset)
 	};
 
 	b->threshold_limit		= THRESHOLD_MAX;
-	threshold_restart_bank(&tr);
+	threshold_restart_block(&tr);
 };
 
 static int setup_APIC_mce_threshold(int reserved, int new)
@@ -525,18 +499,6 @@ static void deferred_error_interrupt_enable(struct cpuinfo_x86 *c)
 	wrmsr(MSR_CU_DEF_ERR, low, high);
 }
 
-static u32 smca_get_block_address(unsigned int bank, unsigned int block,
-				  unsigned int cpu)
-{
-	if (!block)
-		return MSR_AMD64_SMCA_MCx_MISC(bank);
-
-	if (!(per_cpu(smca_misc_banks_map, cpu) & BIT_ULL(bank)))
-		return 0;
-
-	return MSR_AMD64_SMCA_MCx_MISCy(bank, block - 1);
-}
-
 static u32 get_block_address(u32 current_addr, u32 low, u32 high,
 			     unsigned int bank, unsigned int block,
 			     unsigned int cpu)
@@ -546,8 +508,15 @@ static u32 get_block_address(u32 current_addr, u32 low, u32 high,
 	if ((bank >= per_cpu(mce_num_banks, cpu)) || (block >= NR_BLOCKS))
 		return addr;
 
-	if (mce_flags.smca)
-		return smca_get_block_address(bank, block, cpu);
+	if (mce_flags.smca) {
+		if (!block)
+			return MSR_AMD64_SMCA_MCx_MISC(bank);
+
+		if (!(low & MASK_BLKPTR_LO))
+			return 0;
+
+		return MSR_AMD64_SMCA_MCx_MISCy(bank, block - 1);
+	}
 
 	/* Fall back to method we used for older processors: */
 	switch (block) {
@@ -677,6 +646,28 @@ static void disable_err_thresholding(struct cpuinfo_x86 *c, unsigned int bank)
 		wrmsrq(MSR_K7_HWCR, hwcr);
 }
 
+static void amd_apply_cpu_quirks(struct cpuinfo_x86 *c)
+{
+	struct mce_bank *mce_banks = this_cpu_ptr(mce_banks_array);
+
+	/* This should be disabled by the BIOS, but isn't always */
+	if (c->x86 == 15 && this_cpu_read(mce_num_banks) > 4) {
+		/*
+		 * disable GART TBL walk error reporting, which
+		 * trips off incorrectly with the IOMMU & 3ware
+		 * & Cerberus:
+		 */
+		clear_bit(10, (unsigned long *)&mce_banks[4].ctl);
+	}
+
+	/*
+	 * Various K7s with broken bank 0 around. Always disable
+	 * by default.
+	 */
+	if (c->x86 == 6 && this_cpu_read(mce_num_banks))
+		mce_banks[0].ctl = 0;
+}
+
 /* cpu init entry point, called from mce.c with preempt off */
 void mce_amd_feature_init(struct cpuinfo_x86 *c)
 {
@@ -684,6 +675,9 @@ void mce_amd_feature_init(struct cpuinfo_x86 *c)
 	u32 low = 0, high = 0, address = 0;
 	int offset = -1;
 
+	amd_apply_cpu_quirks(c);
+
+	mce_flags.amd_threshold	 = 1;
 
 	for (bank = 0; bank < this_cpu_read(mce_num_banks); ++bank) {
 		if (mce_flags.smca)
@@ -714,6 +708,12 @@ void mce_amd_feature_init(struct cpuinfo_x86 *c)
 		deferred_error_interrupt_enable(c);
 }
 
+void smca_bsp_init(void)
+{
+	mce_threshold_vector	  = amd_threshold_interrupt;
+	deferred_error_int_vector = amd_deferred_error_interrupt;
+}
+
 /*
  * DRAM ECC errors are reported in the Northbridge (bank 4) with
  * Extended Error Code 8.
@@ -921,7 +921,7 @@ static void log_and_reset_block(struct threshold_block *block)
 	/* Reset threshold block after logging error. */
 	memset(&tr, 0, sizeof(tr));
 	tr.b = block;
-	threshold_restart_bank(&tr);
+	threshold_restart_block(&tr);
 }
 
 /*
@@ -930,9 +930,9 @@ static void log_and_reset_block(struct threshold_block *block)
  */
 static void amd_threshold_interrupt(void)
 {
-	struct threshold_block *first_block = NULL, *block = NULL, *tmp = NULL;
-	struct threshold_bank **bp = this_cpu_read(threshold_banks);
+	struct threshold_bank **bp = this_cpu_read(threshold_banks), *thr_bank;
 	unsigned int bank, cpu = smp_processor_id();
+	struct threshold_block *block, *tmp;
 
 	/*
 	 * Validate that the threshold bank has been initialized already. The
@@ -946,20 +946,20 @@ static void amd_threshold_interrupt(void)
 		if (!(per_cpu(bank_map, cpu) & BIT_ULL(bank)))
 			continue;
 
-		first_block = bp[bank]->blocks;
-		if (!first_block)
+		thr_bank = bp[bank];
+		if (!thr_bank)
 			continue;
 
-		/*
-		 * The first block is also the head of the list. Check it first
-		 * before iterating over the rest.
-		 */
-		log_and_reset_block(first_block);
-		list_for_each_entry_safe(block, tmp, &first_block->miscj, miscj)
+		list_for_each_entry_safe(block, tmp, &thr_bank->miscj, miscj)
 			log_and_reset_block(block);
 	}
 }
 
+void amd_clear_bank(struct mce *m)
+{
+	mce_wrmsrq(mca_msr_reg(m->bank, MCA_STATUS), 0);
+}
+
 /*
  * Sysfs Interface
  */
@@ -995,7 +995,7 @@ store_interrupt_enable(struct threshold_block *b, const char *buf, size_t size)
 	memset(&tr, 0, sizeof(tr));
 	tr.b		= b;
 
-	if (smp_call_function_single(b->cpu, threshold_restart_bank, &tr, 1))
+	if (smp_call_function_single(b->cpu, threshold_restart_block, &tr, 1))
 		return -ENODEV;
 
 	return size;
@@ -1020,7 +1020,7 @@ store_threshold_limit(struct threshold_block *b, const char *buf, size_t size)
 	b->threshold_limit = new;
 	tr.b = b;
 
-	if (smp_call_function_single(b->cpu, threshold_restart_bank, &tr, 1))
+	if (smp_call_function_single(b->cpu, threshold_restart_block, &tr, 1))
 		return -ENODEV;
 
 	return size;
@@ -1181,13 +1181,7 @@ static int allocate_threshold_blocks(unsigned int cpu, struct threshold_bank *tb
 		default_attrs[2] = NULL;
 	}
 
-	INIT_LIST_HEAD(&b->miscj);
-
-	/* This is safe as @tb is not visible yet */
-	if (tb->blocks)
-		list_add(&b->miscj, &tb->blocks->miscj);
-	else
-		tb->blocks = b;
+	list_add(&b->miscj, &tb->miscj);
 
 	err = kobject_init_and_add(&b->kobj, &threshold_ktype, tb->kobj, get_name(cpu, bank, b));
 	if (err)
@@ -1238,6 +1232,8 @@ static int threshold_create_bank(struct threshold_bank **bp, unsigned int cpu,
 		goto out_free;
 	}
 
+	INIT_LIST_HEAD(&b->miscj);
+
 	err = allocate_threshold_blocks(cpu, b, bank, 0, mca_msr_reg(bank, MCA_MISC));
 	if (err)
 		goto out_kobj;
@@ -1258,26 +1254,15 @@ static void threshold_block_release(struct kobject *kobj)
 	kfree(to_block(kobj));
 }
 
-static void deallocate_threshold_blocks(struct threshold_bank *bank)
+static void threshold_remove_bank(struct threshold_bank *bank)
 {
 	struct threshold_block *pos, *tmp;
 
-	list_for_each_entry_safe(pos, tmp, &bank->blocks->miscj, miscj) {
+	list_for_each_entry_safe(pos, tmp, &bank->miscj, miscj) {
 		list_del(&pos->miscj);
 		kobject_put(&pos->kobj);
 	}
 
-	kobject_put(&bank->blocks->kobj);
-}
-
-static void threshold_remove_bank(struct threshold_bank *bank)
-{
-	if (!bank->blocks)
-		goto out_free;
-
-	deallocate_threshold_blocks(bank);
-
-out_free:
 	kobject_put(bank->kobj);
 	kfree(bank);
 }
@@ -1296,12 +1281,12 @@ static void __threshold_remove_device(struct threshold_bank **bp)
 	kfree(bp);
 }
 
-int mce_threshold_remove_device(unsigned int cpu)
+void mce_threshold_remove_device(unsigned int cpu)
 {
 	struct threshold_bank **bp = this_cpu_read(threshold_banks);
 
 	if (!bp)
-		return 0;
+		return;
 
 	/*
 	 * Clear the pointer before cleaning up, so that the interrupt won't
@@ -1310,7 +1295,7 @@ int mce_threshold_remove_device(unsigned int cpu)
 	this_cpu_write(threshold_banks, NULL);
 
 	__threshold_remove_device(bp);
-	return 0;
+	return;
 }
 
 /**
@@ -1324,36 +1309,34 @@ int mce_threshold_remove_device(unsigned int cpu)
  * thread running on @cpu.  The callback is invoked on all CPUs which are
  * online when the callback is installed or during a real hotplug event.
  */
-int mce_threshold_create_device(unsigned int cpu)
+void mce_threshold_create_device(unsigned int cpu)
 {
 	unsigned int numbanks, bank;
 	struct threshold_bank **bp;
-	int err;
 
 	if (!mce_flags.amd_threshold)
-		return 0;
+		return;
 
 	bp = this_cpu_read(threshold_banks);
 	if (bp)
-		return 0;
+		return;
 
 	numbanks = this_cpu_read(mce_num_banks);
 	bp = kcalloc(numbanks, sizeof(*bp), GFP_KERNEL);
 	if (!bp)
-		return -ENOMEM;
+		return;
 
 	for (bank = 0; bank < numbanks; ++bank) {
 		if (!(this_cpu_read(bank_map) & BIT_ULL(bank)))
 			continue;
-		err = threshold_create_bank(bp, cpu, bank);
-		if (err) {
+		if (threshold_create_bank(bp, cpu, bank)) {
 			__threshold_remove_device(bp);
-			return err;
+			return;
 		}
 	}
 	this_cpu_write(threshold_banks, bp);
 
 	if (thresholding_irq_en)
 		mce_threshold_vector = amd_threshold_interrupt;
-	return 0;
+	return;
 }
diff --git a/arch/x86/kernel/cpu/mce/core.c b/arch/x86/kernel/cpu/mce/core.c
index 4da4eab56c81..460e90a1a0b1 100644
--- a/arch/x86/kernel/cpu/mce/core.c
+++ b/arch/x86/kernel/cpu/mce/core.c
@@ -423,7 +423,7 @@ noinstr u64 mce_rdmsrq(u32 msr)
 	return EAX_EDX_VAL(val, low, high);
 }
 
-static noinstr void mce_wrmsrq(u32 msr, u64 v)
+noinstr void mce_wrmsrq(u32 msr, u64 v)
 {
 	u32 low, high;
 
@@ -715,6 +715,60 @@ static noinstr void mce_read_aux(struct mce_hw_err *err, int i)
 DEFINE_PER_CPU(unsigned, mce_poll_count);
 
 /*
+ * Newer Intel systems that support software error
+ * recovery need to make additional checks. Other
+ * CPUs should skip over uncorrected errors, but log
+ * everything else.
+ */
+static bool ser_should_log_poll_error(struct mce *m)
+{
+	/* Log "not enabled" (speculative) errors */
+	if (!(m->status & MCI_STATUS_EN))
+		return true;
+
+	/*
+	 * Log UCNA (SDM: 15.6.3 "UCR Error Classification")
+	 * UC == 1 && PCC == 0 && S == 0
+	 */
+	if (!(m->status & MCI_STATUS_PCC) && !(m->status & MCI_STATUS_S))
+		return true;
+
+	return false;
+}
+
+static bool should_log_poll_error(enum mcp_flags flags, struct mce_hw_err *err)
+{
+	struct mce *m = &err->m;
+
+	/* If this entry is not valid, ignore it. */
+	if (!(m->status & MCI_STATUS_VAL))
+		return false;
+
+	/*
+	 * If we are logging everything (at CPU online) or this
+	 * is a corrected error, then we must log it.
+	 */
+	if ((flags & MCP_UC) || !(m->status & MCI_STATUS_UC))
+		return true;
+
+	if (mca_cfg.ser)
+		return ser_should_log_poll_error(m);
+
+	if (m->status & MCI_STATUS_UC)
+		return false;
+
+	return true;
+}
+
+static void clear_bank(struct mce *m)
+{
+	if (m->cpuvendor == X86_VENDOR_AMD)
+		return amd_clear_bank(m);
+
+	mce_wrmsrq(mca_msr_reg(m->bank, MCA_STATUS), 0);
+}
+
+/*
  * Poll for corrected events or events that happened before reset.
  * Those are just logged through /dev/mcelog.
  *
@@ -765,51 +819,10 @@ void machine_check_poll(enum mcp_flags flags, mce_banks_t *b)
 		if (!mca_cfg.cmci_disabled)
 			mce_track_storm(m);
 
-		/* If this entry is not valid, ignore it */
-		if (!(m->status & MCI_STATUS_VAL))
+		/* Verify that the error should be logged based on hardware conditions. */
+		if (!should_log_poll_error(flags, &err))
 			continue;
 
-		/*
-		 * If we are logging everything (at CPU online) or this
-		 * is a corrected error, then we must log it.
-		 */
-		if ((flags & MCP_UC) || !(m->status & MCI_STATUS_UC))
-			goto log_it;
-
-		/*
-		 * Newer Intel systems that support software error
-		 * recovery need to make additional checks. Other
-		 * CPUs should skip over uncorrected errors, but log
-		 * everything else.
-		 */
-		if (!mca_cfg.ser) {
-			if (m->status & MCI_STATUS_UC)
-				continue;
-			goto log_it;
-		}
-
-		/* Log "not enabled" (speculative) errors */
-		if (!(m->status & MCI_STATUS_EN))
-			goto log_it;
-
-		/*
-		 * Log UCNA (SDM: 15.6.3 "UCR Error Classification")
-		 * UC == 1 && PCC == 0 && S == 0
-		 */
-		if (!(m->status & MCI_STATUS_PCC) && !(m->status & MCI_STATUS_S))
-			goto log_it;
-
-		/*
-		 * Skip anything else. Presumption is that our read of this
-		 * bank is racing with a machine check. Leave the log alone
-		 * for do_machine_check() to deal with it.
-		 */
-		continue;
-
-log_it:
-		if (flags & MCP_DONTLOG)
-			goto clear_it;
-
 		mce_read_aux(&err, i);
 		m->severity = mce_severity(m, NULL, NULL, false);
 		/*
@@ -826,10 +839,7 @@ log_it:
 			mce_log(&err);
 
 clear_it:
-		/*
-		 * Clear state for this bank.
-		 */
-		mce_wrmsrq(mca_msr_reg(i, MCA_STATUS), 0);
+		clear_bank(m);
 	}
 
 	/*
@@ -1810,9 +1820,10 @@ static void __mcheck_cpu_mce_banks_init(void)
 		struct mce_bank *b = &mce_banks[i];
 
 		/*
-		 * Init them all, __mcheck_cpu_apply_quirks() is going to apply
-		 * the required vendor quirks before
-		 * __mcheck_cpu_init_clear_banks() does the final bank setup.
+		 * Init them all by default.
+		 *
+		 * The required vendor quirks will be applied before
+		 * __mcheck_cpu_init_prepare_banks() does the final bank setup.
 		 */
 		b->ctl = -1ULL;
 		b->init = true;
@@ -1840,69 +1851,34 @@ static void __mcheck_cpu_cap_init(void)
 	this_cpu_write(mce_num_banks, b);
 
 	__mcheck_cpu_mce_banks_init();
-
-	/* Use accurate RIP reporting if available. */
-	if ((cap & MCG_EXT_P) && MCG_EXT_CNT(cap) >= 9)
-		mca_cfg.rip_msr = MSR_IA32_MCG_EIP;
-
-	if (cap & MCG_SER_P)
-		mca_cfg.ser = 1;
 }
 
 static void __mcheck_cpu_init_generic(void)
 {
-	enum mcp_flags m_fl = 0;
-	mce_banks_t all_banks;
 	u64 cap;
 
-	if (!mca_cfg.bootlog)
-		m_fl = MCP_DONTLOG;
-
-	/*
-	 * Log the machine checks left over from the previous reset. Log them
-	 * only, do not start processing them. That will happen in mcheck_late_init()
-	 * when all consumers have been registered on the notifier chain.
-	 */
-	bitmap_fill(all_banks, MAX_NR_BANKS);
-	machine_check_poll(MCP_UC | MCP_QUEUE_LOG | m_fl, &all_banks);
-
-	cr4_set_bits(X86_CR4_MCE);
-
 	rdmsrq(MSR_IA32_MCG_CAP, cap);
 	if (cap & MCG_CTL_P)
 		wrmsr(MSR_IA32_MCG_CTL, 0xffffffff, 0xffffffff);
 }
 
-static void __mcheck_cpu_init_clear_banks(void)
+static void __mcheck_cpu_init_prepare_banks(void)
 {
 	struct mce_bank *mce_banks = this_cpu_ptr(mce_banks_array);
+	u64 msrval;
 	int i;
 
-	for (i = 0; i < this_cpu_read(mce_num_banks); i++) {
-		struct mce_bank *b = &mce_banks[i];
+	/*
+	 * Log the machine checks left over from the previous reset. Log them
+	 * only, do not start processing them. That will happen in mcheck_late_init()
+	 * when all consumers have been registered on the notifier chain.
+	 */
+	if (mca_cfg.bootlog) {
+		mce_banks_t all_banks;
 
-		if (!b->init)
-			continue;
-		wrmsrq(mca_msr_reg(i, MCA_CTL), b->ctl);
-		wrmsrq(mca_msr_reg(i, MCA_STATUS), 0);
+		bitmap_fill(all_banks, MAX_NR_BANKS);
+		machine_check_poll(MCP_UC | MCP_QUEUE_LOG, &all_banks);
 	}
-}
-
-/*
- * Do a final check to see if there are any unused/RAZ banks.
- *
- * This must be done after the banks have been initialized and any quirks have
- * been applied.
- *
- * Do not call this from any user-initiated flows, e.g. CPU hotplug or sysfs.
- * Otherwise, a user who disables a bank will not be able to re-enable it
- * without a system reboot.
- */
-static void __mcheck_cpu_check_banks(void)
-{
-	struct mce_bank *mce_banks = this_cpu_ptr(mce_banks_array);
-	u64 msrval;
-	int i;
 
 	for (i = 0; i < this_cpu_read(mce_num_banks); i++) {
 		struct mce_bank *b = &mce_banks[i];
@@ -1910,25 +1886,16 @@ static void __mcheck_cpu_check_banks(void)
 		if (!b->init)
 			continue;
 
+		wrmsrq(mca_msr_reg(i, MCA_CTL), b->ctl);
+		wrmsrq(mca_msr_reg(i, MCA_STATUS), 0);
+
 		rdmsrq(mca_msr_reg(i, MCA_CTL), msrval);
 		b->init = !!msrval;
 	}
 }
 
-static void apply_quirks_amd(struct cpuinfo_x86 *c)
+static void amd_apply_global_quirks(struct cpuinfo_x86 *c)
 {
-	struct mce_bank *mce_banks = this_cpu_ptr(mce_banks_array);
-
-	/* This should be disabled by the BIOS, but isn't always */
-	if (c->x86 == 15 && this_cpu_read(mce_num_banks) > 4) {
-		/*
-		 * disable GART TBL walk error reporting, which
-		 * trips off incorrectly with the IOMMU & 3ware
-		 * & Cerberus:
-		 */
-		clear_bit(10, (unsigned long *)&mce_banks[4].ctl);
-	}
-
 	if (c->x86 < 0x11 && mca_cfg.bootlog < 0) {
 		/*
 		 * Lots of broken BIOS around that don't clear them
@@ -1938,13 +1905,6 @@ static void apply_quirks_amd(struct cpuinfo_x86 *c)
 	}
 
 	/*
-	 * Various K7s with broken bank 0 around. Always disable
-	 * by default.
-	 */
-	if (c->x86 == 6 && this_cpu_read(mce_num_banks))
-		mce_banks[0].ctl = 0;
-
-	/*
 	 * overflow_recov is supported for F15h Models 00h-0fh
 	 * even though we don't have a CPUID bit for it.
 	 */
@@ -1955,26 +1915,13 @@ static void apply_quirks_amd(struct cpuinfo_x86 *c)
 		mce_flags.zen_ifu_quirk = 1;
 }
 
-static void apply_quirks_intel(struct cpuinfo_x86 *c)
+static void intel_apply_global_quirks(struct cpuinfo_x86 *c)
 {
-	struct mce_bank *mce_banks = this_cpu_ptr(mce_banks_array);
-
 	/* Older CPUs (prior to family 6) don't need quirks. */
 	if (c->x86_vfm < INTEL_PENTIUM_PRO)
 		return;
 
 	/*
-	 * SDM documents that on family 6 bank 0 should not be written
-	 * because it aliases to another special BIOS controlled
-	 * register.
-	 * But it's not aliased anymore on model 0x1a+
-	 * Don't ignore bank 0 completely because there could be a
-	 * valid event later, merely don't write CTL0.
-	 */
-	if (c->x86_vfm < INTEL_NEHALEM_EP && this_cpu_read(mce_num_banks))
-		mce_banks[0].init = false;
-
-	/*
 	 * All newer Intel systems support MCE broadcasting. Enable
 	 * synchronization with a one second timeout.
 	 */
@@ -1999,7 +1946,7 @@ static void apply_quirks_intel(struct cpuinfo_x86 *c)
 		mce_flags.skx_repmov_quirk = 1;
 }
 
-static void apply_quirks_zhaoxin(struct cpuinfo_x86 *c)
+static void zhaoxin_apply_global_quirks(struct cpuinfo_x86 *c)
 {
 	/*
 	 * All newer Zhaoxin CPUs support MCE broadcasting. Enable
@@ -2011,34 +1958,6 @@ static void apply_quirks_zhaoxin(struct cpuinfo_x86 *c)
 	}
 }
 
-/* Add per CPU specific workarounds here */
-static bool __mcheck_cpu_apply_quirks(struct cpuinfo_x86 *c)
-{
-	struct mca_config *cfg = &mca_cfg;
-
-	switch (c->x86_vendor) {
-	case X86_VENDOR_UNKNOWN:
-		pr_info("unknown CPU type - not enabling MCE support\n");
-		return false;
-	case X86_VENDOR_AMD:
-		apply_quirks_amd(c);
-		break;
-	case X86_VENDOR_INTEL:
-		apply_quirks_intel(c);
-		break;
-	case X86_VENDOR_ZHAOXIN:
-		apply_quirks_zhaoxin(c);
-		break;
-	}
-
-	if (cfg->monarch_timeout < 0)
-		cfg->monarch_timeout = 0;
-	if (cfg->bootlog != 0)
-		cfg->panic_timeout = 30;
-
-	return true;
-}
-
 static bool __mcheck_cpu_ancient_init(struct cpuinfo_x86 *c)
 {
 	if (c->x86 != 5)
@@ -2060,19 +1979,6 @@ static bool __mcheck_cpu_ancient_init(struct cpuinfo_x86 *c)
 	return false;
 }
 
-/*
- * Init basic CPU features needed for early decoding of MCEs.
- */
-static void __mcheck_cpu_init_early(struct cpuinfo_x86 *c)
-{
-	if (c->x86_vendor == X86_VENDOR_AMD || c->x86_vendor == X86_VENDOR_HYGON) {
-		mce_flags.overflow_recov = !!cpu_has(c, X86_FEATURE_OVERFLOW_RECOV);
-		mce_flags.succor	 = !!cpu_has(c, X86_FEATURE_SUCCOR);
-		mce_flags.smca		 = !!cpu_has(c, X86_FEATURE_SMCA);
-		mce_flags.amd_threshold	 = 1;
-	}
-}
-
 static void mce_centaur_feature_init(struct cpuinfo_x86 *c)
 {
 	struct mca_config *cfg = &mca_cfg;
@@ -2281,6 +2187,53 @@ DEFINE_IDTENTRY_RAW(exc_machine_check)
 }
 #endif
 
+void mca_bsp_init(struct cpuinfo_x86 *c)
+{
+	u64 cap;
+
+	if (!mce_available(c))
+		return;
+
+	if (c->x86_vendor == X86_VENDOR_UNKNOWN) {
+		mca_cfg.disabled = 1;
+		pr_info("unknown CPU type - not enabling MCE support\n");
+		return;
+	}
+
+	mce_flags.overflow_recov = cpu_feature_enabled(X86_FEATURE_OVERFLOW_RECOV);
+	mce_flags.succor	 = cpu_feature_enabled(X86_FEATURE_SUCCOR);
+	mce_flags.smca		 = cpu_feature_enabled(X86_FEATURE_SMCA);
+
+	if (mce_flags.smca)
+		smca_bsp_init();
+
+	rdmsrq(MSR_IA32_MCG_CAP, cap);
+
+	/* Use accurate RIP reporting if available. */
+	if ((cap & MCG_EXT_P) && MCG_EXT_CNT(cap) >= 9)
+		mca_cfg.rip_msr = MSR_IA32_MCG_EIP;
+
+	if (cap & MCG_SER_P)
+		mca_cfg.ser = 1;
+
+	switch (c->x86_vendor) {
+	case X86_VENDOR_AMD:
+		amd_apply_global_quirks(c);
+		break;
+	case X86_VENDOR_INTEL:
+		intel_apply_global_quirks(c);
+		break;
+	case X86_VENDOR_ZHAOXIN:
+		zhaoxin_apply_global_quirks(c);
+		break;
+	}
+
+	if (mca_cfg.monarch_timeout < 0)
+		mca_cfg.monarch_timeout = 0;
+	if (mca_cfg.bootlog != 0)
+		mca_cfg.panic_timeout = 30;
+}
+
 /*
  * Called for each booted CPU to set up machine checks.
  * Must be called with preempt off:
@@ -2298,11 +2251,6 @@ void mcheck_cpu_init(struct cpuinfo_x86 *c)
 
 	__mcheck_cpu_cap_init();
 
-	if (!__mcheck_cpu_apply_quirks(c)) {
-		mca_cfg.disabled = 1;
-		return;
-	}
-
 	if (!mce_gen_pool_init()) {
 		mca_cfg.disabled = 1;
 		pr_emerg("Couldn't allocate MCE records pool!\n");
@@ -2311,12 +2259,11 @@ void mcheck_cpu_init(struct cpuinfo_x86 *c)
 
 	mca_cfg.initialized = 1;
 
-	__mcheck_cpu_init_early(c);
 	__mcheck_cpu_init_generic();
 	__mcheck_cpu_init_vendor(c);
-	__mcheck_cpu_init_clear_banks();
-	__mcheck_cpu_check_banks();
+	__mcheck_cpu_init_prepare_banks();
 	__mcheck_cpu_setup_timer();
+	cr4_set_bits(X86_CR4_MCE);
 }
 
 /*
@@ -2483,7 +2430,8 @@ static void mce_syscore_resume(void)
 {
 	__mcheck_cpu_init_generic();
 	__mcheck_cpu_init_vendor(raw_cpu_ptr(&cpu_info));
-	__mcheck_cpu_init_clear_banks();
+	__mcheck_cpu_init_prepare_banks();
+	cr4_set_bits(X86_CR4_MCE);
 }
 
 static struct syscore_ops mce_syscore_ops = {
@@ -2501,8 +2449,9 @@ static void mce_cpu_restart(void *data)
 	if (!mce_available(raw_cpu_ptr(&cpu_info)))
 		return;
 	__mcheck_cpu_init_generic();
-	__mcheck_cpu_init_clear_banks();
+	__mcheck_cpu_init_prepare_banks();
 	__mcheck_cpu_init_timer();
+	cr4_set_bits(X86_CR4_MCE);
 }
 
 /* Reinit MCEs after user configuration changes */
diff --git a/arch/x86/kernel/cpu/mce/intel.c b/arch/x86/kernel/cpu/mce/intel.c
index 9b149b9c4109..4655223ba560 100644
--- a/arch/x86/kernel/cpu/mce/intel.c
+++ b/arch/x86/kernel/cpu/mce/intel.c
@@ -468,8 +468,26 @@ static void intel_imc_init(struct cpuinfo_x86 *c)
 	}
 }
 
+static void intel_apply_cpu_quirks(struct cpuinfo_x86 *c)
+{
+	/*
+	 * SDM documents that on family 6 bank 0 should not be written
+	 * because it aliases to another special BIOS controlled
+	 * register.
+	 * But it's not aliased anymore on model 0x1a+
+	 * Don't ignore bank 0 completely because there could be a
+	 * valid event later, merely don't write CTL0.
+	 *
+	 * Older CPUs (prior to family 6) can't reach this point and already
+	 * return early due to the check of __mcheck_cpu_ancient_init().
+	 */
+	if (c->x86_vfm < INTEL_NEHALEM_EP && this_cpu_read(mce_num_banks))
+		this_cpu_ptr(mce_banks_array)[0].init = false;
+}
+
 void mce_intel_feature_init(struct cpuinfo_x86 *c)
 {
+	intel_apply_cpu_quirks(c);
 	intel_init_cmci();
 	intel_init_lmce();
 	intel_imc_init(c);
diff --git a/arch/x86/kernel/cpu/mce/internal.h b/arch/x86/kernel/cpu/mce/internal.h
index b5ba598e54cb..b0e00ec5cc8c 100644
--- a/arch/x86/kernel/cpu/mce/internal.h
+++ b/arch/x86/kernel/cpu/mce/internal.h
@@ -265,8 +265,11 @@ void mce_prep_record_common(struct mce *m);
 void mce_prep_record_per_cpu(unsigned int cpu, struct mce *m);
 
 #ifdef CONFIG_X86_MCE_AMD
+void mce_threshold_create_device(unsigned int cpu);
+void mce_threshold_remove_device(unsigned int cpu);
 extern bool amd_filter_mce(struct mce *m);
 bool amd_mce_usable_address(struct mce *m);
+void amd_clear_bank(struct mce *m);
 
 /*
  * If MCA_CONFIG[McaLsbInStatusSupported] is set, extract ErrAddr in bits
@@ -292,10 +295,15 @@ static __always_inline void smca_extract_err_addr(struct mce *m)
 	m->addr &= GENMASK_ULL(55, lsb);
 }
 
+void smca_bsp_init(void);
 #else
+static inline void mce_threshold_create_device(unsigned int cpu)	{ }
+static inline void mce_threshold_remove_device(unsigned int cpu)	{ }
 static inline bool amd_filter_mce(struct mce *m) { return false; }
 static inline bool amd_mce_usable_address(struct mce *m) { return false; }
+static inline void amd_clear_bank(struct mce *m) { }
 static inline void smca_extract_err_addr(struct mce *m) { }
+static inline void smca_bsp_init(void) { }
 #endif
 
 #ifdef CONFIG_X86_ANCIENT_MCE
@@ -313,6 +321,7 @@ static __always_inline void winchip_machine_check(struct pt_regs *regs) {}
 #endif
 
 noinstr u64 mce_rdmsrq(u32 msr);
+noinstr void mce_wrmsrq(u32 msr, u64 v);
 
 static __always_inline u32 mca_msr_reg(int bank, enum mca_msr reg)
 {
diff --git a/arch/x86/kernel/cpu/microcode/amd.c b/arch/x86/kernel/cpu/microcode/amd.c
index 097e39327942..cdce885e2fd5 100644
--- a/arch/x86/kernel/cpu/microcode/amd.c
+++ b/arch/x86/kernel/cpu/microcode/amd.c
@@ -171,8 +171,28 @@ static int cmp_id(const void *key, const void *elem)
 		return 1;
 }
 
+static u32 cpuid_to_ucode_rev(unsigned int val)
+{
+	union zen_patch_rev p = {};
+	union cpuid_1_eax c;
+
+	c.full = val;
+
+	p.stepping  = c.stepping;
+	p.model     = c.model;
+	p.ext_model = c.ext_model;
+	p.ext_fam   = c.ext_fam;
+
+	return p.ucode_rev;
+}
+
 static bool need_sha_check(u32 cur_rev)
 {
+	if (!cur_rev) {
+		cur_rev = cpuid_to_ucode_rev(bsp_cpuid_1_eax);
+		pr_info_once("No current revision, generating the lowest one: 0x%x\n", cur_rev);
+	}
+
 	switch (cur_rev >> 8) {
 	case 0x80012: return cur_rev <= 0x800126f; break;
 	case 0x80082: return cur_rev <= 0x800820f; break;
@@ -249,15 +269,6 @@ static bool verify_sha256_digest(u32 patch_id, u32 cur_rev, const u8 *data, unsi
 	return true;
 }
 
-static u32 get_patch_level(void)
-{
-	u32 rev, dummy __always_unused;
-
-	native_rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy);
-
-	return rev;
-}
-
 static union cpuid_1_eax ucode_rev_to_cpuid(unsigned int val)
 {
 	union zen_patch_rev p;
@@ -275,6 +286,30 @@ static union cpuid_1_eax ucode_rev_to_cpuid(unsigned int val)
 	return c;
 }
 
+static u32 get_patch_level(void)
+{
+	u32 rev, dummy __always_unused;
+
+	if (IS_ENABLED(CONFIG_MICROCODE_DBG)) {
+		int cpu = smp_processor_id();
+
+		if (!microcode_rev[cpu]) {
+			if (!base_rev)
+				base_rev = cpuid_to_ucode_rev(bsp_cpuid_1_eax);
+
+			microcode_rev[cpu] = base_rev;
+
+			ucode_dbg("CPU%d, base_rev: 0x%x\n", cpu, base_rev);
+		}
+
+		return microcode_rev[cpu];
+	}
+
+	native_rdmsr(MSR_AMD64_PATCH_LEVEL, rev, dummy);
+
+	return rev;
+}
+
 static u16 find_equiv_id(struct equiv_cpu_table *et, u32 sig)
 {
 	unsigned int i;
@@ -304,13 +339,13 @@ static bool verify_container(const u8 *buf, size_t buf_size)
 	u32 cont_magic;
 
 	if (buf_size <= CONTAINER_HDR_SZ) {
-		pr_debug("Truncated microcode container header.\n");
+		ucode_dbg("Truncated microcode container header.\n");
 		return false;
 	}
 
 	cont_magic = *(const u32 *)buf;
 	if (cont_magic != UCODE_MAGIC) {
-		pr_debug("Invalid magic value (0x%08x).\n", cont_magic);
+		ucode_dbg("Invalid magic value (0x%08x).\n", cont_magic);
 		return false;
 	}
 
@@ -335,8 +370,8 @@ static bool verify_equivalence_table(const u8 *buf, size_t buf_size)
 
 	cont_type = hdr[1];
 	if (cont_type != UCODE_EQUIV_CPU_TABLE_TYPE) {
-		pr_debug("Wrong microcode container equivalence table type: %u.\n",
-			 cont_type);
+		ucode_dbg("Wrong microcode container equivalence table type: %u.\n",
+			  cont_type);
 		return false;
 	}
 
@@ -345,7 +380,7 @@ static bool verify_equivalence_table(const u8 *buf, size_t buf_size)
 	equiv_tbl_len = hdr[2];
 	if (equiv_tbl_len < sizeof(struct equiv_cpu_entry) ||
 	    buf_size < equiv_tbl_len) {
-		pr_debug("Truncated equivalence table.\n");
+		ucode_dbg("Truncated equivalence table.\n");
 		return false;
 	}
 
@@ -365,7 +400,7 @@ static bool __verify_patch_section(const u8 *buf, size_t buf_size, u32 *sh_psize
 	const u32 *hdr;
 
 	if (buf_size < SECTION_HDR_SIZE) {
-		pr_debug("Truncated patch section.\n");
+		ucode_dbg("Truncated patch section.\n");
 		return false;
 	}
 
@@ -374,13 +409,13 @@ static bool __verify_patch_section(const u8 *buf, size_t buf_size, u32 *sh_psize
 	p_size = hdr[1];
 
 	if (p_type != UCODE_UCODE_TYPE) {
-		pr_debug("Invalid type field (0x%x) in container file section header.\n",
-			 p_type);
+		ucode_dbg("Invalid type field (0x%x) in container file section header.\n",
+			  p_type);
 		return false;
 	}
 
 	if (p_size < sizeof(struct microcode_header_amd)) {
-		pr_debug("Patch of size %u too short.\n", p_size);
+		ucode_dbg("Patch of size %u too short.\n", p_size);
 		return false;
 	}
 
@@ -457,12 +492,12 @@ static int verify_patch(const u8 *buf, size_t buf_size, u32 *patch_size)
 	 * size sh_psize, as the section claims.
 	 */
 	if (buf_size < sh_psize) {
-		pr_debug("Patch of size %u truncated.\n", sh_psize);
+		ucode_dbg("Patch of size %u truncated.\n", sh_psize);
 		return -1;
 	}
 
 	if (!__verify_patch_size(sh_psize, buf_size)) {
-		pr_debug("Per-family patch size mismatch.\n");
+		ucode_dbg("Per-family patch size mismatch.\n");
 		return -1;
 	}
 
@@ -476,6 +511,9 @@ static int verify_patch(const u8 *buf, size_t buf_size, u32 *patch_size)
 
 	proc_id	= mc_hdr->processor_rev_id;
 	patch_fam = 0xf + (proc_id >> 12);
+
+	ucode_dbg("Patch-ID 0x%08x: family: 0x%x\n", mc_hdr->patch_id, patch_fam);
+
 	if (patch_fam != family)
 		return 1;
 
@@ -546,9 +584,14 @@ static size_t parse_container(u8 *ucode, size_t size, struct cont_desc *desc)
 		}
 
 		mc = (struct microcode_amd *)(buf + SECTION_HDR_SIZE);
+
+		ucode_dbg("patch_id: 0x%x\n", mc->hdr.patch_id);
+
 		if (mc_patch_matches(mc, eq_id)) {
 			desc->psize = patch_size;
 			desc->mc = mc;
+
+			ucode_dbg(" match: size: %d\n", patch_size);
 		}
 
 skip:
@@ -619,8 +662,14 @@ static bool __apply_microcode_amd(struct microcode_amd *mc, u32 *cur_rev,
 			invlpg(p_addr_end);
 	}
 
+	if (IS_ENABLED(CONFIG_MICROCODE_DBG))
+		microcode_rev[smp_processor_id()] = mc->hdr.patch_id;
+
 	/* verify patch application was successful */
 	*cur_rev = get_patch_level();
+
+	ucode_dbg("updated rev: 0x%x\n", *cur_rev);
+
 	if (*cur_rev != mc->hdr.patch_id)
 		return false;
 
@@ -749,8 +798,6 @@ static struct ucode_patch *cache_find_patch(struct ucode_cpu_info *uci, u16 equi
 	n.equiv_cpu = equiv_cpu;
 	n.patch_id  = uci->cpu_sig.rev;
 
-	WARN_ON_ONCE(!n.patch_id);
-
 	list_for_each_entry(p, &microcode_cache, plist)
 		if (patch_cpus_equivalent(p, &n, false))
 			return p;
@@ -1008,7 +1055,7 @@ static int verify_and_add_patch(u8 family, u8 *fw, unsigned int leftover,
 	patch->patch_id  = mc_hdr->patch_id;
 	patch->equiv_cpu = proc_id;
 
-	pr_debug("%s: Adding patch_id: 0x%08x, proc_id: 0x%04x\n",
+	ucode_dbg("%s: Adding patch_id: 0x%08x, proc_id: 0x%04x\n",
 		 __func__, patch->patch_id, proc_id);
 
 	/* ... and add to cache. */
@@ -1151,7 +1198,7 @@ static enum ucode_state request_microcode_amd(int cpu, struct device *device)
 		snprintf(fw_name, sizeof(fw_name), "amd-ucode/microcode_amd_fam%.2xh.bin", c->x86);
 
 	if (request_firmware_direct(&fw, (const char *)fw_name, device)) {
-		pr_debug("failed to load file %s\n", fw_name);
+		ucode_dbg("failed to load file %s\n", fw_name);
 		goto out;
 	}
 
diff --git a/arch/x86/kernel/cpu/microcode/core.c b/arch/x86/kernel/cpu/microcode/core.c
index b92e09a87c69..f75c140906d0 100644
--- a/arch/x86/kernel/cpu/microcode/core.c
+++ b/arch/x86/kernel/cpu/microcode/core.c
@@ -43,10 +43,19 @@
 #include "internal.h"
 
 static struct microcode_ops *microcode_ops;
-static bool dis_ucode_ldr = false;
+static bool dis_ucode_ldr;
 
 bool force_minrev = IS_ENABLED(CONFIG_MICROCODE_LATE_FORCE_MINREV);
-module_param(force_minrev, bool, S_IRUSR | S_IWUSR);
+
+/*
+ * Those below should be behind CONFIG_MICROCODE_DBG ifdeffery but in
+ * order to not uglify the code with ifdeffery and use IS_ENABLED()
+ * instead, leave them in. When microcode debugging is not enabled,
+ * those are meaningless anyway.
+ */
+/* base microcode revision for debugging */
+u32 base_rev;
+u32 microcode_rev[NR_CPUS] = {};
 
 /*
  * Synchronization.
@@ -119,20 +128,48 @@ bool __init microcode_loader_disabled(void)
 	 *    overwritten.
 	 */
 	if (!cpuid_feature() ||
-	    native_cpuid_ecx(1) & BIT(31) ||
+	    ((native_cpuid_ecx(1) & BIT(31)) &&
+	      !IS_ENABLED(CONFIG_MICROCODE_DBG)) ||
 	    amd_check_current_patch_level())
 		dis_ucode_ldr = true;
 
 	return dis_ucode_ldr;
 }
 
+static void early_parse_cmdline(void)
+{
+	char cmd_buf[64] = {};
+	char *s, *p = cmd_buf;
+
+	if (cmdline_find_option(boot_command_line, "microcode", cmd_buf, sizeof(cmd_buf)) > 0) {
+		while ((s = strsep(&p, ","))) {
+			if (IS_ENABLED(CONFIG_MICROCODE_DBG)) {
+				if (strstr(s, "base_rev=")) {
+					/* advance to the option arg */
+					strsep(&s, "=");
+					if (kstrtouint(s, 16, &base_rev)) { ; }
+				}
+			}
+
+			if (!strcmp("force_minrev", s))
+				force_minrev = true;
+
+			if (!strcmp(s, "dis_ucode_ldr"))
+				dis_ucode_ldr = true;
+		}
+	}
+
+	/* old, compat option */
+	if (cmdline_find_option_bool(boot_command_line, "dis_ucode_ldr") > 0)
+		dis_ucode_ldr = true;
+}
+
 void __init load_ucode_bsp(void)
 {
 	unsigned int cpuid_1_eax;
 	bool intel = true;
 
-	if (cmdline_find_option_bool(boot_command_line, "dis_ucode_ldr") > 0)
-		dis_ucode_ldr = true;
+	early_parse_cmdline();
 
 	if (microcode_loader_disabled())
 		return;
diff --git a/arch/x86/kernel/cpu/microcode/intel-ucode-defs.h b/arch/x86/kernel/cpu/microcode/intel-ucode-defs.h
index cb6e601701ab..2d48e6593540 100644
--- a/arch/x86/kernel/cpu/microcode/intel-ucode-defs.h
+++ b/arch/x86/kernel/cpu/microcode/intel-ucode-defs.h
@@ -67,9 +67,8 @@
 { .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x55, .steppings = 0x0008, .driver_data = 0x1000191 },
 { .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x55, .steppings = 0x0010, .driver_data = 0x2007006 },
 { .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x55, .steppings = 0x0020, .driver_data = 0x3000010 },
-{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x55, .steppings = 0x0040, .driver_data = 0x4003605 },
-{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x55, .steppings = 0x0080, .driver_data = 0x5003707 },
-{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x55, .steppings = 0x0800, .driver_data = 0x7002904 },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x55, .steppings = 0x0080, .driver_data = 0x5003901 },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x55, .steppings = 0x0800, .driver_data = 0x7002b01 },
 { .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x56, .steppings = 0x0004, .driver_data = 0x1c },
 { .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x56, .steppings = 0x0008, .driver_data = 0x700001c },
 { .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x56, .steppings = 0x0010, .driver_data = 0xf00001a },
@@ -81,51 +80,62 @@
 { .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x5f, .steppings = 0x0002, .driver_data = 0x3e },
 { .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x66, .steppings = 0x0008, .driver_data = 0x2a },
 { .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x6a, .steppings = 0x0020, .driver_data = 0xc0002f0 },
-{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x6a, .steppings = 0x0040, .driver_data = 0xd0003e7 },
-{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x6c, .steppings = 0x0002, .driver_data = 0x10002b0 },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x6a, .steppings = 0x0040, .driver_data = 0xd000404 },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x6c, .steppings = 0x0002, .driver_data = 0x10002d0 },
 { .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x7a, .steppings = 0x0002, .driver_data = 0x42 },
-{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x7a, .steppings = 0x0100, .driver_data = 0x24 },
-{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x7e, .steppings = 0x0020, .driver_data = 0xc6 },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x7a, .steppings = 0x0100, .driver_data = 0x26 },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x7e, .steppings = 0x0020, .driver_data = 0xca },
 { .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x8a, .steppings = 0x0002, .driver_data = 0x33 },
-{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x8c, .steppings = 0x0002, .driver_data = 0xb8 },
-{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x8c, .steppings = 0x0004, .driver_data = 0x38 },
-{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x8d, .steppings = 0x0002, .driver_data = 0x52 },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x8c, .steppings = 0x0002, .driver_data = 0xbc },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x8c, .steppings = 0x0004, .driver_data = 0x3c },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x8d, .steppings = 0x0002, .driver_data = 0x56 },
 { .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x8e, .steppings = 0x0200, .driver_data = 0xf6 },
 { .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x8e, .steppings = 0x0400, .driver_data = 0xf6 },
 { .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x8e, .steppings = 0x0800, .driver_data = 0xf6 },
-{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x8e, .steppings = 0x1000, .driver_data = 0xfc },
-{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x8f, .steppings = 0x0100, .driver_data = 0x2c000390 },
-{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x8f, .steppings = 0x0080, .driver_data = 0x2b000603 },
-{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x8f, .steppings = 0x0040, .driver_data = 0x2c000390 },
-{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x8f, .steppings = 0x0020, .driver_data = 0x2c000390 },
-{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x8f, .steppings = 0x0010, .driver_data = 0x2c000390 },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x8e, .steppings = 0x1000, .driver_data = 0x100 },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x8f, .steppings = 0x0010, .driver_data = 0x2c0003f7 },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x8f, .steppings = 0x0020, .driver_data = 0x2c0003f7 },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x8f, .steppings = 0x0040, .driver_data = 0x2c0003f7 },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x8f, .steppings = 0x0080, .driver_data = 0x2b000639 },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x8f, .steppings = 0x0100, .driver_data = 0x2c0003f7 },
 { .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x96, .steppings = 0x0002, .driver_data = 0x1a },
-{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x97, .steppings = 0x0004, .driver_data = 0x37 },
-{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x97, .steppings = 0x0020, .driver_data = 0x37 },
-{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xbf, .steppings = 0x0004, .driver_data = 0x37 },
-{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xbf, .steppings = 0x0020, .driver_data = 0x37 },
-{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x9a, .steppings = 0x0008, .driver_data = 0x435 },
-{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x9a, .steppings = 0x0010, .driver_data = 0x435 },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x97, .steppings = 0x0004, .driver_data = 0x3a },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x97, .steppings = 0x0020, .driver_data = 0x3a },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x9a, .steppings = 0x0008, .driver_data = 0x437 },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x9a, .steppings = 0x0010, .driver_data = 0x437 },
 { .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x9c, .steppings = 0x0001, .driver_data = 0x24000026 },
 { .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x9e, .steppings = 0x0200, .driver_data = 0xf8 },
-{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x9e, .steppings = 0x0400, .driver_data = 0xf8 },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x9e, .steppings = 0x0400, .driver_data = 0xfa },
 { .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x9e, .steppings = 0x0800, .driver_data = 0xf6 },
 { .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x9e, .steppings = 0x1000, .driver_data = 0xf8 },
-{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x9e, .steppings = 0x2000, .driver_data = 0x100 },
-{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xa5, .steppings = 0x0004, .driver_data = 0xfc },
-{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xa5, .steppings = 0x0008, .driver_data = 0xfc },
-{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xa5, .steppings = 0x0020, .driver_data = 0xfc },
-{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xa6, .steppings = 0x0001, .driver_data = 0xfe },
-{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xa6, .steppings = 0x0002, .driver_data = 0xfc },
-{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xa7, .steppings = 0x0002, .driver_data = 0x62 },
-{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xaa, .steppings = 0x0010, .driver_data = 0x20 },
-{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xb7, .steppings = 0x0002, .driver_data = 0x12b },
-{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xba, .steppings = 0x0004, .driver_data = 0x4123 },
-{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xba, .steppings = 0x0008, .driver_data = 0x4123 },
-{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xba, .steppings = 0x0100, .driver_data = 0x4123 },
-{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xbe, .steppings = 0x0001, .driver_data = 0x1a },
-{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xcf, .steppings = 0x0004, .driver_data = 0x21000283 },
-{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xcf, .steppings = 0x0002, .driver_data = 0x21000283 },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0x9e, .steppings = 0x2000, .driver_data = 0x104 },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xa5, .steppings = 0x0004, .driver_data = 0x100 },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xa5, .steppings = 0x0008, .driver_data = 0x100 },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xa5, .steppings = 0x0020, .driver_data = 0x100 },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xa6, .steppings = 0x0001, .driver_data = 0x102 },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xa6, .steppings = 0x0002, .driver_data = 0x100 },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xa7, .steppings = 0x0002, .driver_data = 0x64 },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xaa, .steppings = 0x0010, .driver_data = 0x24 },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xad, .steppings = 0x0002, .driver_data = 0xa0000d1 },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xaf, .steppings = 0x0008, .driver_data = 0x3000341 },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xb5, .steppings = 0x0001, .driver_data = 0xa },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xb7, .steppings = 0x0002, .driver_data = 0x12f },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xb7, .steppings = 0x0010, .driver_data = 0x12f },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xba, .steppings = 0x0004, .driver_data = 0x4128 },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xba, .steppings = 0x0008, .driver_data = 0x4128 },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xba, .steppings = 0x0100, .driver_data = 0x4128 },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xbd, .steppings = 0x0002, .driver_data = 0x11f },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xbe, .steppings = 0x0001, .driver_data = 0x1d },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xbf, .steppings = 0x0004, .driver_data = 0x3a },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xbf, .steppings = 0x0020, .driver_data = 0x3a },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xbf, .steppings = 0x0040, .driver_data = 0x3a },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xbf, .steppings = 0x0080, .driver_data = 0x3a },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xc5, .steppings = 0x0004, .driver_data = 0x118 },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xc6, .steppings = 0x0004, .driver_data = 0x118 },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xc6, .steppings = 0x0010, .driver_data = 0x118 },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xca, .steppings = 0x0004, .driver_data = 0x118 },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xcf, .steppings = 0x0002, .driver_data = 0x210002a9 },
+{ .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0x6,  .model = 0xcf, .steppings = 0x0004, .driver_data = 0x210002a9 },
 { .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0xf,  .model = 0x00, .steppings = 0x0080, .driver_data = 0x12 },
 { .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0xf,  .model = 0x00, .steppings = 0x0400, .driver_data = 0x15 },
 { .flags = X86_CPU_ID_FLAG_ENTRY_VALID, .vendor = X86_VENDOR_INTEL, .family = 0xf,  .model = 0x01, .steppings = 0x0004, .driver_data = 0x2e },
diff --git a/arch/x86/kernel/cpu/microcode/internal.h b/arch/x86/kernel/cpu/microcode/internal.h
index 50a9702ae4e2..ae8dbc2b908d 100644
--- a/arch/x86/kernel/cpu/microcode/internal.h
+++ b/arch/x86/kernel/cpu/microcode/internal.h
@@ -44,6 +44,9 @@ struct early_load_data {
 
 extern struct early_load_data early_data;
 extern struct ucode_cpu_info ucode_cpu_info[];
+extern u32 microcode_rev[NR_CPUS];
+extern u32 base_rev;
+
 struct cpio_data find_microcode_in_initrd(const char *path);
 
 #define MAX_UCODE_COUNT 128
@@ -122,4 +125,10 @@ static inline void reload_ucode_intel(void) { }
 static inline struct microcode_ops *init_intel_microcode(void) { return NULL; }
 #endif  /* !CONFIG_CPU_SUP_INTEL */
 
+#define ucode_dbg(fmt, ...)					\
+({								\
+	if (IS_ENABLED(CONFIG_MICROCODE_DBG))			\
+		pr_info(fmt, ##__VA_ARGS__);			\
+})
+
 #endif /* _X86_MICROCODE_INTERNAL_H */
diff --git a/arch/x86/kernel/cpu/resctrl/core.c b/arch/x86/kernel/cpu/resctrl/core.c
index 187d527ef73b..06ca5a30140c 100644
--- a/arch/x86/kernel/cpu/resctrl/core.c
+++ b/arch/x86/kernel/cpu/resctrl/core.c
@@ -107,7 +107,7 @@ u32 resctrl_arch_system_num_rmid_idx(void)
 	struct rdt_resource *r = &rdt_resources_all[RDT_RESOURCE_L3].r_resctrl;
 
 	/* RMID are independent numbers for x86. num_rmid_idx == num_rmid */
-	return r->num_rmid;
+	return r->mon.num_rmid;
 }
 
 struct rdt_resource *resctrl_arch_get_resource(enum resctrl_res_level l)
@@ -365,8 +365,10 @@ static void ctrl_domain_free(struct rdt_hw_ctrl_domain *hw_dom)
 
 static void mon_domain_free(struct rdt_hw_mon_domain *hw_dom)
 {
-	kfree(hw_dom->arch_mbm_total);
-	kfree(hw_dom->arch_mbm_local);
+	int idx;
+
+	for_each_mbm_idx(idx)
+		kfree(hw_dom->arch_mbm_states[idx]);
 	kfree(hw_dom);
 }
 
@@ -400,25 +402,27 @@ static int domain_setup_ctrlval(struct rdt_resource *r, struct rdt_ctrl_domain *
  */
 static int arch_domain_mbm_alloc(u32 num_rmid, struct rdt_hw_mon_domain *hw_dom)
 {
-	size_t tsize;
-
-	if (resctrl_arch_is_mbm_total_enabled()) {
-		tsize = sizeof(*hw_dom->arch_mbm_total);
-		hw_dom->arch_mbm_total = kcalloc(num_rmid, tsize, GFP_KERNEL);
-		if (!hw_dom->arch_mbm_total)
-			return -ENOMEM;
-	}
-	if (resctrl_arch_is_mbm_local_enabled()) {
-		tsize = sizeof(*hw_dom->arch_mbm_local);
-		hw_dom->arch_mbm_local = kcalloc(num_rmid, tsize, GFP_KERNEL);
-		if (!hw_dom->arch_mbm_local) {
-			kfree(hw_dom->arch_mbm_total);
-			hw_dom->arch_mbm_total = NULL;
-			return -ENOMEM;
-		}
+	size_t tsize = sizeof(*hw_dom->arch_mbm_states[0]);
+	enum resctrl_event_id eventid;
+	int idx;
+
+	for_each_mbm_event_id(eventid) {
+		if (!resctrl_is_mon_event_enabled(eventid))
+			continue;
+		idx = MBM_STATE_IDX(eventid);
+		hw_dom->arch_mbm_states[idx] = kcalloc(num_rmid, tsize, GFP_KERNEL);
+		if (!hw_dom->arch_mbm_states[idx])
+			goto cleanup;
 	}
 
 	return 0;
+cleanup:
+	for_each_mbm_idx(idx) {
+		kfree(hw_dom->arch_mbm_states[idx]);
+		hw_dom->arch_mbm_states[idx] = NULL;
+	}
+
+	return -ENOMEM;
 }
 
 static int get_domain_id_from_scope(int cpu, enum resctrl_scope scope)
@@ -516,6 +520,9 @@ static void domain_add_cpu_mon(int cpu, struct rdt_resource *r)
 		d = container_of(hdr, struct rdt_mon_domain, hdr);
 
 		cpumask_set_cpu(cpu, &d->hdr.cpu_mask);
+		/* Update the mbm_assign_mode state for the CPU if supported */
+		if (r->mon.mbm_cntr_assignable)
+			resctrl_arch_mbm_cntr_assign_set_one(r);
 		return;
 	}
 
@@ -535,9 +542,13 @@ static void domain_add_cpu_mon(int cpu, struct rdt_resource *r)
 	d->ci_id = ci->id;
 	cpumask_set_cpu(cpu, &d->hdr.cpu_mask);
 
+	/* Update the mbm_assign_mode state for the CPU if supported */
+	if (r->mon.mbm_cntr_assignable)
+		resctrl_arch_mbm_cntr_assign_set_one(r);
+
 	arch_mon_domain_online(r, d);
 
-	if (arch_domain_mbm_alloc(r->num_rmid, hw_dom)) {
+	if (arch_domain_mbm_alloc(r->mon.num_rmid, hw_dom)) {
 		mon_domain_free(hw_dom);
 		return;
 	}
@@ -707,6 +718,7 @@ enum {
 	RDT_FLAG_MBA,
 	RDT_FLAG_SMBA,
 	RDT_FLAG_BMEC,
+	RDT_FLAG_ABMC,
 };
 
 #define RDT_OPT(idx, n, f)	\
@@ -732,6 +744,7 @@ static struct rdt_options rdt_options[]  __ro_after_init = {
 	RDT_OPT(RDT_FLAG_MBA,	    "mba",	X86_FEATURE_MBA),
 	RDT_OPT(RDT_FLAG_SMBA,	    "smba",	X86_FEATURE_SMBA),
 	RDT_OPT(RDT_FLAG_BMEC,	    "bmec",	X86_FEATURE_BMEC),
+	RDT_OPT(RDT_FLAG_ABMC,	    "abmc",	X86_FEATURE_ABMC),
 };
 #define NUM_RDT_OPTIONS ARRAY_SIZE(rdt_options)
 
@@ -863,15 +876,24 @@ static __init bool get_rdt_alloc_resources(void)
 static __init bool get_rdt_mon_resources(void)
 {
 	struct rdt_resource *r = &rdt_resources_all[RDT_RESOURCE_L3].r_resctrl;
+	bool ret = false;
 
-	if (rdt_cpu_has(X86_FEATURE_CQM_OCCUP_LLC))
-		rdt_mon_features |= (1 << QOS_L3_OCCUP_EVENT_ID);
-	if (rdt_cpu_has(X86_FEATURE_CQM_MBM_TOTAL))
-		rdt_mon_features |= (1 << QOS_L3_MBM_TOTAL_EVENT_ID);
-	if (rdt_cpu_has(X86_FEATURE_CQM_MBM_LOCAL))
-		rdt_mon_features |= (1 << QOS_L3_MBM_LOCAL_EVENT_ID);
+	if (rdt_cpu_has(X86_FEATURE_CQM_OCCUP_LLC)) {
+		resctrl_enable_mon_event(QOS_L3_OCCUP_EVENT_ID);
+		ret = true;
+	}
+	if (rdt_cpu_has(X86_FEATURE_CQM_MBM_TOTAL)) {
+		resctrl_enable_mon_event(QOS_L3_MBM_TOTAL_EVENT_ID);
+		ret = true;
+	}
+	if (rdt_cpu_has(X86_FEATURE_CQM_MBM_LOCAL)) {
+		resctrl_enable_mon_event(QOS_L3_MBM_LOCAL_EVENT_ID);
+		ret = true;
+	}
+	if (rdt_cpu_has(X86_FEATURE_ABMC))
+		ret = true;
 
-	if (!rdt_mon_features)
+	if (!ret)
 		return false;
 
 	return !rdt_get_mon_l3_config(r);
@@ -965,7 +987,7 @@ static enum cpuhp_state rdt_online;
 /* Runs once on the BSP during boot. */
 void resctrl_cpu_detect(struct cpuinfo_x86 *c)
 {
-	if (!cpu_has(c, X86_FEATURE_CQM_LLC)) {
+	if (!cpu_has(c, X86_FEATURE_CQM_LLC) && !cpu_has(c, X86_FEATURE_ABMC)) {
 		c->x86_cache_max_rmid  = -1;
 		c->x86_cache_occ_scale = -1;
 		c->x86_cache_mbm_width_offset = -1;
@@ -977,7 +999,8 @@ void resctrl_cpu_detect(struct cpuinfo_x86 *c)
 
 	if (cpu_has(c, X86_FEATURE_CQM_OCCUP_LLC) ||
 	    cpu_has(c, X86_FEATURE_CQM_MBM_TOTAL) ||
-	    cpu_has(c, X86_FEATURE_CQM_MBM_LOCAL)) {
+	    cpu_has(c, X86_FEATURE_CQM_MBM_LOCAL) ||
+	    cpu_has(c, X86_FEATURE_ABMC)) {
 		u32 eax, ebx, ecx, edx;
 
 		/* QoS sub-leaf, EAX=0Fh, ECX=1 */
diff --git a/arch/x86/kernel/cpu/resctrl/internal.h b/arch/x86/kernel/cpu/resctrl/internal.h
index 5e3c41b36437..9f4c2f0aaf5c 100644
--- a/arch/x86/kernel/cpu/resctrl/internal.h
+++ b/arch/x86/kernel/cpu/resctrl/internal.h
@@ -37,6 +37,15 @@ struct arch_mbm_state {
 	u64	prev_msr;
 };
 
+/* Setting bit 0 in L3_QOS_EXT_CFG enables the ABMC feature. */
+#define ABMC_ENABLE_BIT			0
+
+/*
+ * Qos Event Identifiers.
+ */
+#define ABMC_EXTENDED_EVT_ID		BIT(31)
+#define ABMC_EVT_ID			BIT(0)
+
 /**
  * struct rdt_hw_ctrl_domain - Arch private attributes of a set of CPUs that share
  *			       a resource for a control function
@@ -54,15 +63,15 @@ struct rdt_hw_ctrl_domain {
  * struct rdt_hw_mon_domain - Arch private attributes of a set of CPUs that share
  *			      a resource for a monitor function
  * @d_resctrl:	Properties exposed to the resctrl file system
- * @arch_mbm_total:	arch private state for MBM total bandwidth
- * @arch_mbm_local:	arch private state for MBM local bandwidth
+ * @arch_mbm_states:	Per-event pointer to the MBM event's saved state.
+ *			An MBM event's state is an array of struct arch_mbm_state
+ *			indexed by RMID on x86.
  *
  * Members of this structure are accessed via helpers that provide abstraction.
  */
 struct rdt_hw_mon_domain {
 	struct rdt_mon_domain		d_resctrl;
-	struct arch_mbm_state		*arch_mbm_total;
-	struct arch_mbm_state		*arch_mbm_local;
+	struct arch_mbm_state		*arch_mbm_states[QOS_NUM_L3_MBM_EVENTS];
 };
 
 static inline struct rdt_hw_ctrl_domain *resctrl_to_arch_ctrl_dom(struct rdt_ctrl_domain *r)
@@ -102,6 +111,7 @@ struct msr_param {
  * @mon_scale:		cqm counter * mon_scale = occupancy in bytes
  * @mbm_width:		Monitor width, to detect and correct for overflow.
  * @cdp_enabled:	CDP state of this resource
+ * @mbm_cntr_assign_enabled:	ABMC feature is enabled
  *
  * Members of this structure are either private to the architecture
  * e.g. mbm_width, or accessed via helpers that provide abstraction. e.g.
@@ -115,6 +125,7 @@ struct rdt_hw_resource {
 	unsigned int		mon_scale;
 	unsigned int		mbm_width;
 	bool			cdp_enabled;
+	bool			mbm_cntr_assign_enabled;
 };
 
 static inline struct rdt_hw_resource *resctrl_to_arch_res(struct rdt_resource *r)
@@ -159,6 +170,42 @@ union cpuid_0x10_x_edx {
 	unsigned int full;
 };
 
+/*
+ * ABMC counters are configured by writing to MSR_IA32_L3_QOS_ABMC_CFG.
+ *
+ * @bw_type		: Event configuration that represents the memory
+ *			  transactions being tracked by the @cntr_id.
+ * @bw_src		: Bandwidth source (RMID or CLOSID).
+ * @reserved1		: Reserved.
+ * @is_clos		: @bw_src field is a CLOSID (not an RMID).
+ * @cntr_id		: Counter identifier.
+ * @reserved		: Reserved.
+ * @cntr_en		: Counting enable bit.
+ * @cfg_en		: Configuration enable bit.
+ *
+ * Configuration and counting:
+ * Counter can be configured across multiple writes to MSR. Configuration
+ * is applied only when @cfg_en = 1. Counter @cntr_id is reset when the
+ * configuration is applied.
+ * @cfg_en = 1, @cntr_en = 0 : Apply @cntr_id configuration but do not
+ *                             count events.
+ * @cfg_en = 1, @cntr_en = 1 : Apply @cntr_id configuration and start
+ *                             counting events.
+ */
+union l3_qos_abmc_cfg {
+	struct {
+		unsigned long bw_type  :32,
+			      bw_src   :12,
+			      reserved1: 3,
+			      is_clos  : 1,
+			      cntr_id  : 5,
+			      reserved : 9,
+			      cntr_en  : 1,
+			      cfg_en   : 1;
+	} split;
+	unsigned long full;
+};
+
 void rdt_ctrl_update(void *arg);
 
 int rdt_get_mon_l3_config(struct rdt_resource *r);
@@ -168,5 +215,6 @@ bool rdt_cpu_has(int flag);
 void __init intel_rdt_mbm_apply_quirk(void);
 
 void rdt_domain_reconfigure_cdp(struct rdt_resource *r);
+void resctrl_arch_mbm_cntr_assign_set_one(struct rdt_resource *r);
 
 #endif /* _ASM_X86_RESCTRL_INTERNAL_H */
diff --git a/arch/x86/kernel/cpu/resctrl/monitor.c b/arch/x86/kernel/cpu/resctrl/monitor.c
index c261558276cd..c8945610d455 100644
--- a/arch/x86/kernel/cpu/resctrl/monitor.c
+++ b/arch/x86/kernel/cpu/resctrl/monitor.c
@@ -31,11 +31,6 @@
  */
 bool rdt_mon_capable;
 
-/*
- * Global to indicate which monitoring events are enabled.
- */
-unsigned int rdt_mon_features;
-
 #define CF(cf)	((unsigned long)(1048576 * (cf) + 0.5))
 
 static int snc_nodes_per_l3_cache = 1;
@@ -135,7 +130,7 @@ static int logical_rmid_to_physical_rmid(int cpu, int lrmid)
 	if (snc_nodes_per_l3_cache == 1)
 		return lrmid;
 
-	return lrmid + (cpu_to_node(cpu) % snc_nodes_per_l3_cache) * r->num_rmid;
+	return lrmid + (cpu_to_node(cpu) % snc_nodes_per_l3_cache) * r->mon.num_rmid;
 }
 
 static int __rmid_read_phys(u32 prmid, enum resctrl_event_id eventid, u64 *val)
@@ -166,18 +161,14 @@ static struct arch_mbm_state *get_arch_mbm_state(struct rdt_hw_mon_domain *hw_do
 						 u32 rmid,
 						 enum resctrl_event_id eventid)
 {
-	switch (eventid) {
-	case QOS_L3_OCCUP_EVENT_ID:
-		return NULL;
-	case QOS_L3_MBM_TOTAL_EVENT_ID:
-		return &hw_dom->arch_mbm_total[rmid];
-	case QOS_L3_MBM_LOCAL_EVENT_ID:
-		return &hw_dom->arch_mbm_local[rmid];
-	default:
-		/* Never expect to get here */
-		WARN_ON_ONCE(1);
+	struct arch_mbm_state *state;
+
+	if (!resctrl_is_mbm_event(eventid))
 		return NULL;
-	}
+
+	state = hw_dom->arch_mbm_states[MBM_STATE_IDX(eventid)];
+
+	return state ? &state[rmid] : NULL;
 }
 
 void resctrl_arch_reset_rmid(struct rdt_resource *r, struct rdt_mon_domain *d,
@@ -206,14 +197,16 @@ void resctrl_arch_reset_rmid(struct rdt_resource *r, struct rdt_mon_domain *d,
 void resctrl_arch_reset_rmid_all(struct rdt_resource *r, struct rdt_mon_domain *d)
 {
 	struct rdt_hw_mon_domain *hw_dom = resctrl_to_arch_mon_dom(d);
-
-	if (resctrl_arch_is_mbm_total_enabled())
-		memset(hw_dom->arch_mbm_total, 0,
-		       sizeof(*hw_dom->arch_mbm_total) * r->num_rmid);
-
-	if (resctrl_arch_is_mbm_local_enabled())
-		memset(hw_dom->arch_mbm_local, 0,
-		       sizeof(*hw_dom->arch_mbm_local) * r->num_rmid);
+	enum resctrl_event_id eventid;
+	int idx;
+
+	for_each_mbm_event_id(eventid) {
+		if (!resctrl_is_mon_event_enabled(eventid))
+			continue;
+		idx = MBM_STATE_IDX(eventid);
+		memset(hw_dom->arch_mbm_states[idx], 0,
+		       sizeof(*hw_dom->arch_mbm_states[0]) * r->mon.num_rmid);
+	}
 }
 
 static u64 mbm_overflow_count(u64 prev_msr, u64 cur_msr, unsigned int width)
@@ -224,15 +217,33 @@ static u64 mbm_overflow_count(u64 prev_msr, u64 cur_msr, unsigned int width)
 	return chunks >> shift;
 }
 
+static u64 get_corrected_val(struct rdt_resource *r, struct rdt_mon_domain *d,
+			     u32 rmid, enum resctrl_event_id eventid, u64 msr_val)
+{
+	struct rdt_hw_mon_domain *hw_dom = resctrl_to_arch_mon_dom(d);
+	struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r);
+	struct arch_mbm_state *am;
+	u64 chunks;
+
+	am = get_arch_mbm_state(hw_dom, rmid, eventid);
+	if (am) {
+		am->chunks += mbm_overflow_count(am->prev_msr, msr_val,
+						 hw_res->mbm_width);
+		chunks = get_corrected_mbm_count(rmid, am->chunks);
+		am->prev_msr = msr_val;
+	} else {
+		chunks = msr_val;
+	}
+
+	return chunks * hw_res->mon_scale;
+}
+
 int resctrl_arch_rmid_read(struct rdt_resource *r, struct rdt_mon_domain *d,
 			   u32 unused, u32 rmid, enum resctrl_event_id eventid,
 			   u64 *val, void *ignored)
 {
-	struct rdt_hw_mon_domain *hw_dom = resctrl_to_arch_mon_dom(d);
-	struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r);
 	int cpu = cpumask_any(&d->hdr.cpu_mask);
-	struct arch_mbm_state *am;
-	u64 msr_val, chunks;
+	u64 msr_val;
 	u32 prmid;
 	int ret;
 
@@ -243,17 +254,76 @@ int resctrl_arch_rmid_read(struct rdt_resource *r, struct rdt_mon_domain *d,
 	if (ret)
 		return ret;
 
+	*val = get_corrected_val(r, d, rmid, eventid, msr_val);
+
+	return 0;
+}
+
+static int __cntr_id_read(u32 cntr_id, u64 *val)
+{
+	u64 msr_val;
+
+	/*
+	 * QM_EVTSEL Register definition:
+	 * =======================================================
+	 * Bits    Mnemonic        Description
+	 * =======================================================
+	 * 63:44   --              Reserved
+	 * 43:32   RMID            RMID or counter ID in ABMC mode
+	 *                         when reading an MBM event
+	 * 31      ExtendedEvtID   Extended Event Identifier
+	 * 30:8    --              Reserved
+	 * 7:0     EvtID           Event Identifier
+	 * =======================================================
+	 * The contents of a specific counter can be read by setting the
+	 * following fields in QM_EVTSEL.ExtendedEvtID(=1) and
+	 * QM_EVTSEL.EvtID = L3CacheABMC (=1) and setting QM_EVTSEL.RMID
+	 * to the desired counter ID. Reading the QM_CTR then returns the
+	 * contents of the specified counter. The RMID_VAL_ERROR bit is set
+	 * if the counter configuration is invalid, or if an invalid counter
+	 * ID is set in the QM_EVTSEL.RMID field.  The RMID_VAL_UNAVAIL bit
+	 * is set if the counter data is unavailable.
+	 */
+	wrmsr(MSR_IA32_QM_EVTSEL, ABMC_EXTENDED_EVT_ID | ABMC_EVT_ID, cntr_id);
+	rdmsrl(MSR_IA32_QM_CTR, msr_val);
+
+	if (msr_val & RMID_VAL_ERROR)
+		return -EIO;
+	if (msr_val & RMID_VAL_UNAVAIL)
+		return -EINVAL;
+
+	*val = msr_val;
+	return 0;
+}
+
+void resctrl_arch_reset_cntr(struct rdt_resource *r, struct rdt_mon_domain *d,
+			     u32 unused, u32 rmid, int cntr_id,
+			     enum resctrl_event_id eventid)
+{
+	struct rdt_hw_mon_domain *hw_dom = resctrl_to_arch_mon_dom(d);
+	struct arch_mbm_state *am;
+
 	am = get_arch_mbm_state(hw_dom, rmid, eventid);
 	if (am) {
-		am->chunks += mbm_overflow_count(am->prev_msr, msr_val,
-						 hw_res->mbm_width);
-		chunks = get_corrected_mbm_count(rmid, am->chunks);
-		am->prev_msr = msr_val;
-	} else {
-		chunks = msr_val;
+		memset(am, 0, sizeof(*am));
+
+		/* Record any initial, non-zero count value. */
+		__cntr_id_read(cntr_id, &am->prev_msr);
 	}
+}
+
+int resctrl_arch_cntr_read(struct rdt_resource *r, struct rdt_mon_domain *d,
+			   u32 unused, u32 rmid, int cntr_id,
+			   enum resctrl_event_id eventid, u64 *val)
+{
+	u64 msr_val;
+	int ret;
+
+	ret = __cntr_id_read(cntr_id, &msr_val);
+	if (ret)
+		return ret;
 
-	*val = chunks * hw_res->mon_scale;
+	*val = get_corrected_val(r, d, rmid, eventid, msr_val);
 
 	return 0;
 }
@@ -346,12 +416,13 @@ int __init rdt_get_mon_l3_config(struct rdt_resource *r)
 	unsigned int mbm_offset = boot_cpu_data.x86_cache_mbm_width_offset;
 	struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r);
 	unsigned int threshold;
+	u32 eax, ebx, ecx, edx;
 
 	snc_nodes_per_l3_cache = snc_get_config();
 
 	resctrl_rmid_realloc_limit = boot_cpu_data.x86_cache_size * 1024;
 	hw_res->mon_scale = boot_cpu_data.x86_cache_occ_scale / snc_nodes_per_l3_cache;
-	r->num_rmid = (boot_cpu_data.x86_cache_max_rmid + 1) / snc_nodes_per_l3_cache;
+	r->mon.num_rmid = (boot_cpu_data.x86_cache_max_rmid + 1) / snc_nodes_per_l3_cache;
 	hw_res->mbm_width = MBM_CNTR_WIDTH_BASE;
 
 	if (mbm_offset > 0 && mbm_offset <= MBM_CNTR_WIDTH_OFFSET_MAX)
@@ -366,7 +437,7 @@ int __init rdt_get_mon_l3_config(struct rdt_resource *r)
 	 *
 	 * For a 35MB LLC and 56 RMIDs, this is ~1.8% of the LLC.
 	 */
-	threshold = resctrl_rmid_realloc_limit / r->num_rmid;
+	threshold = resctrl_rmid_realloc_limit / r->mon.num_rmid;
 
 	/*
 	 * Because num_rmid may not be a power of two, round the value
@@ -375,12 +446,17 @@ int __init rdt_get_mon_l3_config(struct rdt_resource *r)
 	 */
 	resctrl_rmid_realloc_threshold = resctrl_arch_round_mon_val(threshold);
 
-	if (rdt_cpu_has(X86_FEATURE_BMEC)) {
-		u32 eax, ebx, ecx, edx;
-
+	if (rdt_cpu_has(X86_FEATURE_BMEC) || rdt_cpu_has(X86_FEATURE_ABMC)) {
 		/* Detect list of bandwidth sources that can be tracked */
 		cpuid_count(0x80000020, 3, &eax, &ebx, &ecx, &edx);
-		r->mbm_cfg_mask = ecx & MAX_EVT_CONFIG_BITS;
+		r->mon.mbm_cfg_mask = ecx & MAX_EVT_CONFIG_BITS;
+	}
+
+	if (rdt_cpu_has(X86_FEATURE_ABMC)) {
+		r->mon.mbm_cntr_assignable = true;
+		cpuid_count(0x80000020, 5, &eax, &ebx, &ecx, &edx);
+		r->mon.num_mbm_cntrs = (ebx & GENMASK(15, 0)) + 1;
+		hw_res->mbm_cntr_assign_enabled = true;
 	}
 
 	r->mon_capable = true;
@@ -401,3 +477,91 @@ void __init intel_rdt_mbm_apply_quirk(void)
 	mbm_cf_rmidthreshold = mbm_cf_table[cf_index].rmidthreshold;
 	mbm_cf = mbm_cf_table[cf_index].cf;
 }
+
+static void resctrl_abmc_set_one_amd(void *arg)
+{
+	bool *enable = arg;
+
+	if (*enable)
+		msr_set_bit(MSR_IA32_L3_QOS_EXT_CFG, ABMC_ENABLE_BIT);
+	else
+		msr_clear_bit(MSR_IA32_L3_QOS_EXT_CFG, ABMC_ENABLE_BIT);
+}
+
+/*
+ * ABMC enable/disable requires update of L3_QOS_EXT_CFG MSR on all the CPUs
+ * associated with all monitor domains.
+ */
+static void _resctrl_abmc_enable(struct rdt_resource *r, bool enable)
+{
+	struct rdt_mon_domain *d;
+
+	lockdep_assert_cpus_held();
+
+	list_for_each_entry(d, &r->mon_domains, hdr.list) {
+		on_each_cpu_mask(&d->hdr.cpu_mask, resctrl_abmc_set_one_amd,
+				 &enable, 1);
+		resctrl_arch_reset_rmid_all(r, d);
+	}
+}
+
+int resctrl_arch_mbm_cntr_assign_set(struct rdt_resource *r, bool enable)
+{
+	struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r);
+
+	if (r->mon.mbm_cntr_assignable &&
+	    hw_res->mbm_cntr_assign_enabled != enable) {
+		_resctrl_abmc_enable(r, enable);
+		hw_res->mbm_cntr_assign_enabled = enable;
+	}
+
+	return 0;
+}
+
+bool resctrl_arch_mbm_cntr_assign_enabled(struct rdt_resource *r)
+{
+	return resctrl_to_arch_res(r)->mbm_cntr_assign_enabled;
+}
+
+static void resctrl_abmc_config_one_amd(void *info)
+{
+	union l3_qos_abmc_cfg *abmc_cfg = info;
+
+	wrmsrl(MSR_IA32_L3_QOS_ABMC_CFG, abmc_cfg->full);
+}
+
+/*
+ * Send an IPI to the domain to assign the counter to RMID, event pair.
+ */
+void resctrl_arch_config_cntr(struct rdt_resource *r, struct rdt_mon_domain *d,
+			      enum resctrl_event_id evtid, u32 rmid, u32 closid,
+			      u32 cntr_id, bool assign)
+{
+	struct rdt_hw_mon_domain *hw_dom = resctrl_to_arch_mon_dom(d);
+	union l3_qos_abmc_cfg abmc_cfg = { 0 };
+	struct arch_mbm_state *am;
+
+	abmc_cfg.split.cfg_en = 1;
+	abmc_cfg.split.cntr_en = assign ? 1 : 0;
+	abmc_cfg.split.cntr_id = cntr_id;
+	abmc_cfg.split.bw_src = rmid;
+	if (assign)
+		abmc_cfg.split.bw_type = resctrl_get_mon_evt_cfg(evtid);
+
+	smp_call_function_any(&d->hdr.cpu_mask, resctrl_abmc_config_one_amd, &abmc_cfg, 1);
+
+	/*
+	 * The hardware counter is reset (because cfg_en == 1) so there is no
+	 * need to record initial non-zero counts.
+	 */
+	am = get_arch_mbm_state(hw_dom, rmid, evtid);
+	if (am)
+		memset(am, 0, sizeof(*am));
+}
+
+void resctrl_arch_mbm_cntr_assign_set_one(struct rdt_resource *r)
+{
+	struct rdt_hw_resource *hw_res = resctrl_to_arch_res(r);
+
+	resctrl_abmc_set_one_amd(&hw_res->mbm_cntr_assign_enabled);
+}
diff --git a/arch/x86/kernel/cpu/scattered.c b/arch/x86/kernel/cpu/scattered.c
index b4a1f6732a3a..4cee6213d667 100644
--- a/arch/x86/kernel/cpu/scattered.c
+++ b/arch/x86/kernel/cpu/scattered.c
@@ -48,8 +48,10 @@ static const struct cpuid_bit cpuid_bits[] = {
 	{ X86_FEATURE_PROC_FEEDBACK,		CPUID_EDX, 11, 0x80000007, 0 },
 	{ X86_FEATURE_AMD_FAST_CPPC,		CPUID_EDX, 15, 0x80000007, 0 },
 	{ X86_FEATURE_MBA,			CPUID_EBX,  6, 0x80000008, 0 },
+	{ X86_FEATURE_COHERENCY_SFW_NO,		CPUID_EBX, 31, 0x8000001f, 0 },
 	{ X86_FEATURE_SMBA,			CPUID_EBX,  2, 0x80000020, 0 },
 	{ X86_FEATURE_BMEC,			CPUID_EBX,  3, 0x80000020, 0 },
+	{ X86_FEATURE_ABMC,			CPUID_EBX,  5, 0x80000020, 0 },
 	{ X86_FEATURE_TSA_SQ_NO,		CPUID_ECX,  1, 0x80000021, 0 },
 	{ X86_FEATURE_TSA_L1_NO,		CPUID_ECX,  2, 0x80000021, 0 },
 	{ X86_FEATURE_AMD_WORKLOAD_CLASS,	CPUID_EAX, 22, 0x80000021, 0 },
diff --git a/arch/x86/kernel/cpu/topology.c b/arch/x86/kernel/cpu/topology.c
index e35ccdc84910..6073a16628f9 100644
--- a/arch/x86/kernel/cpu/topology.c
+++ b/arch/x86/kernel/cpu/topology.c
@@ -372,6 +372,19 @@ unsigned int topology_unit_count(u32 apicid, enum x86_topology_domains which_uni
 	return topo_unit_count(lvlid, at_level, apic_maps[which_units].map);
 }
 
+#ifdef CONFIG_SMP
+int topology_get_primary_thread(unsigned int cpu)
+{
+	u32 apic_id = cpuid_to_apicid[cpu];
+
+	/*
+	 * Get the core domain level APIC id, which is the primary thread
+	 * and return the CPU number assigned to it.
+	 */
+	return topo_lookup_cpuid(topo_apicid(apic_id, TOPO_CORE_DOMAIN));
+}
+#endif
+
 #ifdef CONFIG_ACPI_HOTPLUG_CPU
 /**
  * topology_hotplug_apic - Handle a physical hotplugged APIC after boot
diff --git a/arch/x86/kernel/cpu/topology_amd.c b/arch/x86/kernel/cpu/topology_amd.c
index 843b1655ab45..6ac097e13106 100644
--- a/arch/x86/kernel/cpu/topology_amd.c
+++ b/arch/x86/kernel/cpu/topology_amd.c
@@ -59,7 +59,7 @@ static void store_node(struct topo_scan *tscan, u16 nr_nodes, u16 node_id)
 	tscan->amd_node_id = node_id;
 }
 
-static bool parse_8000_001e(struct topo_scan *tscan, bool has_topoext)
+static bool parse_8000_001e(struct topo_scan *tscan)
 {
 	struct {
 		// eax
@@ -81,20 +81,25 @@ static bool parse_8000_001e(struct topo_scan *tscan, bool has_topoext)
 
 	cpuid_leaf(0x8000001e, &leaf);
 
-	tscan->c->topo.initial_apicid = leaf.ext_apic_id;
-
 	/*
-	 * If leaf 0xb is available, then the domain shifts are set
-	 * already and nothing to do here. Only valid for family >= 0x17.
+	 * If leaf 0xb/0x26 is available, then the APIC ID and the domain
+	 * shifts are set already.
 	 */
-	if (!has_topoext && tscan->c->x86 >= 0x17) {
+	if (!cpu_feature_enabled(X86_FEATURE_XTOPOLOGY)) {
+		tscan->c->topo.initial_apicid = leaf.ext_apic_id;
+
 		/*
-		 * Leaf 0x80000008 set the CORE domain shift already.
-		 * Update the SMT domain, but do not propagate it.
+		 * Leaf 0x8000008 sets the CORE domain shift but not the
+		 * SMT domain shift. On CPUs with family >= 0x17, there
+		 * might be hyperthreads.
 		 */
-		unsigned int nthreads = leaf.core_nthreads + 1;
+		if (tscan->c->x86 >= 0x17) {
+			/* Update the SMT domain, but do not propagate it. */
+			unsigned int nthreads = leaf.core_nthreads + 1;
 
-		topology_update_dom(tscan, TOPO_SMT_DOMAIN, get_count_order(nthreads), nthreads);
+			topology_update_dom(tscan, TOPO_SMT_DOMAIN,
+					    get_count_order(nthreads), nthreads);
+		}
 	}
 
 	store_node(tscan, leaf.nnodes_per_socket + 1, leaf.node_id);
@@ -158,11 +163,12 @@ static void topoext_fixup(struct topo_scan *tscan)
 	    c->x86 != 0x15 || c->x86_model < 0x10 || c->x86_model > 0x6f)
 		return;
 
-	if (msr_set_bit(0xc0011005, 54) <= 0)
+	if (msr_set_bit(MSR_AMD64_CPUID_EXT_FEAT,
+			MSR_AMD64_CPUID_EXT_FEAT_TOPOEXT_BIT) <= 0)
 		return;
 
-	rdmsrq(0xc0011005, msrval);
-	if (msrval & BIT_64(54)) {
+	rdmsrq(MSR_AMD64_CPUID_EXT_FEAT, msrval);
+	if (msrval & MSR_AMD64_CPUID_EXT_FEAT_TOPOEXT) {
 		set_cpu_cap(c, X86_FEATURE_TOPOEXT);
 		pr_info_once(FW_INFO "CPU: Re-enabling disabled Topology Extensions Support.\n");
 	}
@@ -170,27 +176,27 @@ static void topoext_fixup(struct topo_scan *tscan)
 
 static void parse_topology_amd(struct topo_scan *tscan)
 {
-	bool has_topoext = false;
+	if (cpu_feature_enabled(X86_FEATURE_AMD_HTR_CORES))
+		tscan->c->topo.cpu_type = cpuid_ebx(0x80000026);
 
 	/*
-	 * If the extended topology leaf 0x8000_001e is available
-	 * try to get SMT, CORE, TILE, and DIE shifts from extended
+	 * Try to get SMT, CORE, TILE, and DIE shifts from extended
 	 * CPUID leaf 0x8000_0026 on supported processors first. If
 	 * extended CPUID leaf 0x8000_0026 is not supported, try to
-	 * get SMT and CORE shift from leaf 0xb first, then try to
-	 * get the CORE shift from leaf 0x8000_0008.
+	 * get SMT and CORE shift from leaf 0xb. If either leaf is
+	 * available, cpu_parse_topology_ext() will return true.
+	 *
+	 * If XTOPOLOGY leaves (0x26/0xb) are not available, try to
+	 * get the CORE shift from leaf 0x8000_0008 first.
 	 */
-	if (cpu_feature_enabled(X86_FEATURE_TOPOEXT))
-		has_topoext = cpu_parse_topology_ext(tscan);
-
-	if (cpu_feature_enabled(X86_FEATURE_AMD_HTR_CORES))
-		tscan->c->topo.cpu_type = cpuid_ebx(0x80000026);
-
-	if (!has_topoext && !parse_8000_0008(tscan))
+	if (!cpu_parse_topology_ext(tscan) && !parse_8000_0008(tscan))
 		return;
 
-	/* Prefer leaf 0x8000001e if available */
-	if (parse_8000_001e(tscan, has_topoext))
+	/*
+	 * Prefer leaf 0x8000001e if available to get the SMT shift and
+	 * the initial APIC ID if XTOPOLOGY leaves are not available.
+	 */
+	if (parse_8000_001e(tscan))
 		return;
 
 	/* Try the NODEID MSR */
diff --git a/arch/x86/kernel/fpu/core.c b/arch/x86/kernel/fpu/core.c
index aefd412a23dc..1f71cc135e9a 100644
--- a/arch/x86/kernel/fpu/core.c
+++ b/arch/x86/kernel/fpu/core.c
@@ -631,7 +631,7 @@ static int update_fpu_shstk(struct task_struct *dst, unsigned long ssp)
 }
 
 /* Clone current's FPU state on fork */
-int fpu_clone(struct task_struct *dst, unsigned long clone_flags, bool minimal,
+int fpu_clone(struct task_struct *dst, u64 clone_flags, bool minimal,
 	      unsigned long ssp)
 {
 	/*
diff --git a/arch/x86/kernel/fpu/xstate.c b/arch/x86/kernel/fpu/xstate.c
index 12ed75c1b567..28e4fd65c9da 100644
--- a/arch/x86/kernel/fpu/xstate.c
+++ b/arch/x86/kernel/fpu/xstate.c
@@ -1881,19 +1881,20 @@ long fpu_xstate_prctl(int option, unsigned long arg2)
 #ifdef CONFIG_PROC_PID_ARCH_STATUS
 /*
  * Report the amount of time elapsed in millisecond since last AVX512
- * use in the task.
+ * use in the task. Report -1 if no AVX-512 usage.
  */
 static void avx512_status(struct seq_file *m, struct task_struct *task)
 {
-	unsigned long timestamp = READ_ONCE(x86_task_fpu(task)->avx512_timestamp);
-	long delta;
+	unsigned long timestamp;
+	long delta = -1;
 
-	if (!timestamp) {
-		/*
-		 * Report -1 if no AVX512 usage
-		 */
-		delta = -1;
-	} else {
+	/* AVX-512 usage is not tracked for kernel threads. Don't report anything. */
+	if (task->flags & (PF_KTHREAD | PF_USER_WORKER))
+		return;
+
+	timestamp = READ_ONCE(x86_task_fpu(task)->avx512_timestamp);
+
+	if (timestamp) {
 		delta = (long)(jiffies - timestamp);
 		/*
 		 * Cap to LONG_MAX if time difference > LONG_MAX
diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c
index 533fcf5636fc..fd28b53dbac5 100644
--- a/arch/x86/kernel/head64.c
+++ b/arch/x86/kernel/head64.c
@@ -52,10 +52,13 @@ SYM_PIC_ALIAS(next_early_pgt);
 pmdval_t early_pmd_flags = __PAGE_KERNEL_LARGE & ~(_PAGE_GLOBAL | _PAGE_NX);
 
 unsigned int __pgtable_l5_enabled __ro_after_init;
+SYM_PIC_ALIAS(__pgtable_l5_enabled);
 unsigned int pgdir_shift __ro_after_init = 39;
 EXPORT_SYMBOL(pgdir_shift);
+SYM_PIC_ALIAS(pgdir_shift);
 unsigned int ptrs_per_p4d __ro_after_init = 1;
 EXPORT_SYMBOL(ptrs_per_p4d);
+SYM_PIC_ALIAS(ptrs_per_p4d);
 
 unsigned long page_offset_base __ro_after_init = __PAGE_OFFSET_BASE_L4;
 EXPORT_SYMBOL(page_offset_base);
@@ -316,5 +319,5 @@ void early_setup_idt(void)
 		handler = vc_boot_ghcb;
 	}
 
-	startup_64_load_idt(handler);
+	__pi_startup_64_load_idt(handler);
 }
diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S
index 76743dfad6ab..80ef5d386b03 100644
--- a/arch/x86/kernel/head_32.S
+++ b/arch/x86/kernel/head_32.S
@@ -61,7 +61,7 @@ RESERVE_BRK(pagetables, INIT_MAP_SIZE)
  * any particular GDT layout, because we load our own as soon as we
  * can.
  */
-__HEAD
+	__INIT
 SYM_CODE_START(startup_32)
 	movl pa(initial_stack),%ecx
 	
@@ -136,6 +136,9 @@ SYM_CODE_END(startup_32)
  * If cpu hotplug is not supported then this code can go in init section
  * which will be freed later
  */
+#ifdef CONFIG_HOTPLUG_CPU
+       .text
+#endif
 SYM_FUNC_START(startup_32_smp)
 	cld
 	movl $(__BOOT_DS),%eax
diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S
index 3e9b3a3bd039..21816b48537c 100644
--- a/arch/x86/kernel/head_64.S
+++ b/arch/x86/kernel/head_64.S
@@ -33,7 +33,7 @@
  * because we need identity-mapped pages.
  */
 
-	__HEAD
+	__INIT
 	.code64
 SYM_CODE_START_NOALIGN(startup_64)
 	UNWIND_HINT_END_OF_STACK
@@ -71,7 +71,7 @@ SYM_CODE_START_NOALIGN(startup_64)
 	xorl	%edx, %edx
 	wrmsr
 
-	call	startup_64_setup_gdt_idt
+	call	__pi_startup_64_setup_gdt_idt
 
 	/* Now switch to __KERNEL_CS so IRET works reliably */
 	pushq	$__KERNEL_CS
@@ -91,7 +91,7 @@ SYM_CODE_START_NOALIGN(startup_64)
 	 * subsequent code. Pass the boot_params pointer as the first argument.
 	 */
 	movq	%r15, %rdi
-	call	sme_enable
+	call	__pi_sme_enable
 #endif
 
 	/* Sanitize CPU configuration */
@@ -111,7 +111,7 @@ SYM_CODE_START_NOALIGN(startup_64)
 	 * programmed into CR3.
 	 */
 	movq	%r15, %rsi
-	call	__startup_64
+	call	__pi___startup_64
 
 	/* Form the CR3 value being sure to include the CR3 modifier */
 	leaq	early_top_pgt(%rip), %rcx
@@ -562,7 +562,7 @@ SYM_CODE_START_NOALIGN(vc_no_ghcb)
 	/* Call C handler */
 	movq    %rsp, %rdi
 	movq	ORIG_RAX(%rsp), %rsi
-	call    do_vc_no_ghcb
+	call    __pi_do_vc_no_ghcb
 
 	/* Unwind pt_regs */
 	POP_REGS
diff --git a/arch/x86/kernel/kprobes/core.c b/arch/x86/kernel/kprobes/core.c
index 6079d15dab8c..3863d7709386 100644
--- a/arch/x86/kernel/kprobes/core.c
+++ b/arch/x86/kernel/kprobes/core.c
@@ -339,7 +339,7 @@ static bool can_probe(unsigned long paddr)
 	if (is_exception_insn(&insn))
 		return false;
 
-	if (IS_ENABLED(CONFIG_CFI_CLANG)) {
+	if (IS_ENABLED(CONFIG_CFI)) {
 		/*
 		 * The compiler generates the following instruction sequence
 		 * for indirect call checks and cfi.c decodes this;
diff --git a/arch/x86/kernel/process.c b/arch/x86/kernel/process.c
index 1b7960cf6eb0..e3a3987b0c4f 100644
--- a/arch/x86/kernel/process.c
+++ b/arch/x86/kernel/process.c
@@ -159,7 +159,7 @@ __visible void ret_from_fork(struct task_struct *prev, struct pt_regs *regs,
 
 int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
-	unsigned long clone_flags = args->flags;
+	u64 clone_flags = args->flags;
 	unsigned long sp = args->stack;
 	unsigned long tls = args->tls;
 	struct inactive_task_frame *frame;
diff --git a/arch/x86/kernel/shstk.c b/arch/x86/kernel/shstk.c
index 2ddf23387c7e..978232b6d48d 100644
--- a/arch/x86/kernel/shstk.c
+++ b/arch/x86/kernel/shstk.c
@@ -191,7 +191,7 @@ void reset_thread_features(void)
 	current->thread.features_locked = 0;
 }
 
-unsigned long shstk_alloc_thread_stack(struct task_struct *tsk, unsigned long clone_flags,
+unsigned long shstk_alloc_thread_stack(struct task_struct *tsk, u64 clone_flags,
 				       unsigned long stack_size)
 {
 	struct thread_shstk *shstk = &tsk->thread.shstk;
@@ -246,6 +246,46 @@ static unsigned long get_user_shstk_addr(void)
 	return ssp;
 }
 
+int shstk_pop(u64 *val)
+{
+	int ret = 0;
+	u64 ssp;
+
+	if (!features_enabled(ARCH_SHSTK_SHSTK))
+		return -ENOTSUPP;
+
+	fpregs_lock_and_load();
+
+	rdmsrq(MSR_IA32_PL3_SSP, ssp);
+	if (val && get_user(*val, (__user u64 *)ssp))
+		ret = -EFAULT;
+	else
+		wrmsrq(MSR_IA32_PL3_SSP, ssp + SS_FRAME_SIZE);
+	fpregs_unlock();
+
+	return ret;
+}
+
+int shstk_push(u64 val)
+{
+	u64 ssp;
+	int ret;
+
+	if (!features_enabled(ARCH_SHSTK_SHSTK))
+		return -ENOTSUPP;
+
+	fpregs_lock_and_load();
+
+	rdmsrq(MSR_IA32_PL3_SSP, ssp);
+	ssp -= SS_FRAME_SIZE;
+	ret = write_user_shstk_64((__user void *)ssp, val);
+	if (!ret)
+		wrmsrq(MSR_IA32_PL3_SSP, ssp);
+	fpregs_unlock();
+
+	return ret;
+}
+
 #define SHSTK_DATA_BIT BIT(63)
 
 static int put_shstk_data(u64 __user *addr, u64 data)
diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c
index 33e166f6ab12..eb289abece23 100644
--- a/arch/x86/kernel/smpboot.c
+++ b/arch/x86/kernel/smpboot.c
@@ -479,14 +479,14 @@ static int x86_cluster_flags(void)
 static bool x86_has_numa_in_package;
 
 static struct sched_domain_topology_level x86_topology[] = {
-	SDTL_INIT(cpu_smt_mask, cpu_smt_flags, SMT),
+	SDTL_INIT(tl_smt_mask, cpu_smt_flags, SMT),
 #ifdef CONFIG_SCHED_CLUSTER
-	SDTL_INIT(cpu_clustergroup_mask, x86_cluster_flags, CLS),
+	SDTL_INIT(tl_cls_mask, x86_cluster_flags, CLS),
 #endif
 #ifdef CONFIG_SCHED_MC
-	SDTL_INIT(cpu_coregroup_mask, x86_core_flags, MC),
+	SDTL_INIT(tl_mc_mask, x86_core_flags, MC),
 #endif
-	SDTL_INIT(cpu_cpu_mask, x86_sched_itmt_flags, PKG),
+	SDTL_INIT(tl_pkg_mask, x86_sched_itmt_flags, PKG),
 	{ NULL },
 };
 
diff --git a/arch/x86/kernel/umip.c b/arch/x86/kernel/umip.c
index 5a4b21389b1d..d432f3824f0c 100644
--- a/arch/x86/kernel/umip.c
+++ b/arch/x86/kernel/umip.c
@@ -156,15 +156,26 @@ static int identify_insn(struct insn *insn)
 	if (!insn->modrm.nbytes)
 		return -EINVAL;
 
-	/* All the instructions of interest start with 0x0f. */
-	if (insn->opcode.bytes[0] != 0xf)
+	/* The instructions of interest have 2-byte opcodes: 0F 00 or 0F 01. */
+	if (insn->opcode.nbytes < 2 || insn->opcode.bytes[0] != 0xf)
 		return -EINVAL;
 
 	if (insn->opcode.bytes[1] == 0x1) {
 		switch (X86_MODRM_REG(insn->modrm.value)) {
 		case 0:
+			/* The reg form of 0F 01 /0 encodes VMX instructions. */
+			if (X86_MODRM_MOD(insn->modrm.value) == 3)
+				return -EINVAL;
+
 			return UMIP_INST_SGDT;
 		case 1:
+			/*
+			 * The reg form of 0F 01 /1 encodes MONITOR/MWAIT,
+			 * STAC/CLAC, and ENCLS.
+			 */
+			if (X86_MODRM_MOD(insn->modrm.value) == 3)
+				return -EINVAL;
+
 			return UMIP_INST_SIDT;
 		case 4:
 			return UMIP_INST_SMSW;
diff --git a/arch/x86/kernel/uprobes.c b/arch/x86/kernel/uprobes.c
index 6d383839e839..845aeaf36b8d 100644
--- a/arch/x86/kernel/uprobes.c
+++ b/arch/x86/kernel/uprobes.c
@@ -18,6 +18,7 @@
 #include <asm/processor.h>
 #include <asm/insn.h>
 #include <asm/mmu_context.h>
+#include <asm/nops.h>
 
 /* Post-execution fixups. */
 
@@ -310,25 +311,32 @@ static int uprobe_init_insn(struct arch_uprobe *auprobe, struct insn *insn, bool
 
 #ifdef CONFIG_X86_64
 
+struct uretprobe_syscall_args {
+	unsigned long r11;
+	unsigned long cx;
+	unsigned long ax;
+};
+
 asm (
 	".pushsection .rodata\n"
 	".global uretprobe_trampoline_entry\n"
 	"uretprobe_trampoline_entry:\n"
-	"pushq %rax\n"
-	"pushq %rcx\n"
-	"pushq %r11\n"
-	"movq $" __stringify(__NR_uretprobe) ", %rax\n"
+	"push %rax\n"
+	"push %rcx\n"
+	"push %r11\n"
+	"mov $" __stringify(__NR_uretprobe) ", %rax\n"
 	"syscall\n"
 	".global uretprobe_syscall_check\n"
 	"uretprobe_syscall_check:\n"
-	"popq %r11\n"
-	"popq %rcx\n"
-
-	/* The uretprobe syscall replaces stored %rax value with final
+	"pop %r11\n"
+	"pop %rcx\n"
+	/*
+	 * The uretprobe syscall replaces stored %rax value with final
 	 * return address, so we don't restore %rax in here and just
 	 * call ret.
 	 */
-	"retq\n"
+	"ret\n"
+	"int3\n"
 	".global uretprobe_trampoline_end\n"
 	"uretprobe_trampoline_end:\n"
 	".popsection\n"
@@ -338,7 +346,7 @@ extern u8 uretprobe_trampoline_entry[];
 extern u8 uretprobe_trampoline_end[];
 extern u8 uretprobe_syscall_check[];
 
-void *arch_uprobe_trampoline(unsigned long *psize)
+void *arch_uretprobe_trampoline(unsigned long *psize)
 {
 	static uprobe_opcode_t insn = UPROBE_SWBP_INSN;
 	struct pt_regs *regs = task_pt_regs(current);
@@ -365,7 +373,8 @@ static unsigned long trampoline_check_ip(unsigned long tramp)
 SYSCALL_DEFINE0(uretprobe)
 {
 	struct pt_regs *regs = task_pt_regs(current);
-	unsigned long err, ip, sp, r11_cx_ax[3], tramp;
+	struct uretprobe_syscall_args args;
+	unsigned long err, ip, sp, tramp;
 
 	/* If there's no trampoline, we are called from wrong place. */
 	tramp = uprobe_get_trampoline_vaddr();
@@ -376,15 +385,15 @@ SYSCALL_DEFINE0(uretprobe)
 	if (unlikely(regs->ip != trampoline_check_ip(tramp)))
 		goto sigill;
 
-	err = copy_from_user(r11_cx_ax, (void __user *)regs->sp, sizeof(r11_cx_ax));
+	err = copy_from_user(&args, (void __user *)regs->sp, sizeof(args));
 	if (err)
 		goto sigill;
 
 	/* expose the "right" values of r11/cx/ax/sp to uprobe_consumer/s */
-	regs->r11 = r11_cx_ax[0];
-	regs->cx  = r11_cx_ax[1];
-	regs->ax  = r11_cx_ax[2];
-	regs->sp += sizeof(r11_cx_ax);
+	regs->r11 = args.r11;
+	regs->cx  = args.cx;
+	regs->ax  = args.ax;
+	regs->sp += sizeof(args);
 	regs->orig_ax = -1;
 
 	ip = regs->ip;
@@ -400,21 +409,21 @@ SYSCALL_DEFINE0(uretprobe)
 	 */
 	if (regs->sp != sp || shstk_is_enabled())
 		return regs->ax;
-	regs->sp -= sizeof(r11_cx_ax);
+	regs->sp -= sizeof(args);
 
 	/* for the case uprobe_consumer has changed r11/cx */
-	r11_cx_ax[0] = regs->r11;
-	r11_cx_ax[1] = regs->cx;
+	args.r11 = regs->r11;
+	args.cx  = regs->cx;
 
 	/*
 	 * ax register is passed through as return value, so we can use
 	 * its space on stack for ip value and jump to it through the
 	 * trampoline's ret instruction
 	 */
-	r11_cx_ax[2] = regs->ip;
+	args.ax  = regs->ip;
 	regs->ip = ip;
 
-	err = copy_to_user((void __user *)regs->sp, r11_cx_ax, sizeof(r11_cx_ax));
+	err = copy_to_user((void __user *)regs->sp, &args, sizeof(args));
 	if (err)
 		goto sigill;
 
@@ -608,6 +617,581 @@ static void riprel_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
 		*sr = utask->autask.saved_scratch_register;
 	}
 }
+
+static int tramp_mremap(const struct vm_special_mapping *sm, struct vm_area_struct *new_vma)
+{
+	return -EPERM;
+}
+
+static struct page *tramp_mapping_pages[2] __ro_after_init;
+
+static struct vm_special_mapping tramp_mapping = {
+	.name   = "[uprobes-trampoline]",
+	.mremap = tramp_mremap,
+	.pages  = tramp_mapping_pages,
+};
+
+struct uprobe_trampoline {
+	struct hlist_node	node;
+	unsigned long		vaddr;
+};
+
+static bool is_reachable_by_call(unsigned long vtramp, unsigned long vaddr)
+{
+	long delta = (long)(vaddr + 5 - vtramp);
+
+	return delta >= INT_MIN && delta <= INT_MAX;
+}
+
+static unsigned long find_nearest_trampoline(unsigned long vaddr)
+{
+	struct vm_unmapped_area_info info = {
+		.length     = PAGE_SIZE,
+		.align_mask = ~PAGE_MASK,
+	};
+	unsigned long low_limit, high_limit;
+	unsigned long low_tramp, high_tramp;
+	unsigned long call_end = vaddr + 5;
+
+	if (check_add_overflow(call_end, INT_MIN, &low_limit))
+		low_limit = PAGE_SIZE;
+
+	high_limit = call_end + INT_MAX;
+
+	/* Search up from the caller address. */
+	info.low_limit = call_end;
+	info.high_limit = min(high_limit, TASK_SIZE);
+	high_tramp = vm_unmapped_area(&info);
+
+	/* Search down from the caller address. */
+	info.low_limit = max(low_limit, PAGE_SIZE);
+	info.high_limit = call_end;
+	info.flags = VM_UNMAPPED_AREA_TOPDOWN;
+	low_tramp = vm_unmapped_area(&info);
+
+	if (IS_ERR_VALUE(high_tramp) && IS_ERR_VALUE(low_tramp))
+		return -ENOMEM;
+	if (IS_ERR_VALUE(high_tramp))
+		return low_tramp;
+	if (IS_ERR_VALUE(low_tramp))
+		return high_tramp;
+
+	/* Return address that's closest to the caller address. */
+	if (call_end - low_tramp < high_tramp - call_end)
+		return low_tramp;
+	return high_tramp;
+}
+
+static struct uprobe_trampoline *create_uprobe_trampoline(unsigned long vaddr)
+{
+	struct pt_regs *regs = task_pt_regs(current);
+	struct mm_struct *mm = current->mm;
+	struct uprobe_trampoline *tramp;
+	struct vm_area_struct *vma;
+
+	if (!user_64bit_mode(regs))
+		return NULL;
+
+	vaddr = find_nearest_trampoline(vaddr);
+	if (IS_ERR_VALUE(vaddr))
+		return NULL;
+
+	tramp = kzalloc(sizeof(*tramp), GFP_KERNEL);
+	if (unlikely(!tramp))
+		return NULL;
+
+	tramp->vaddr = vaddr;
+	vma = _install_special_mapping(mm, tramp->vaddr, PAGE_SIZE,
+				VM_READ|VM_EXEC|VM_MAYEXEC|VM_MAYREAD|VM_DONTCOPY|VM_IO,
+				&tramp_mapping);
+	if (IS_ERR(vma)) {
+		kfree(tramp);
+		return NULL;
+	}
+	return tramp;
+}
+
+static struct uprobe_trampoline *get_uprobe_trampoline(unsigned long vaddr, bool *new)
+{
+	struct uprobes_state *state = &current->mm->uprobes_state;
+	struct uprobe_trampoline *tramp = NULL;
+
+	if (vaddr > TASK_SIZE || vaddr < PAGE_SIZE)
+		return NULL;
+
+	hlist_for_each_entry(tramp, &state->head_tramps, node) {
+		if (is_reachable_by_call(tramp->vaddr, vaddr)) {
+			*new = false;
+			return tramp;
+		}
+	}
+
+	tramp = create_uprobe_trampoline(vaddr);
+	if (!tramp)
+		return NULL;
+
+	*new = true;
+	hlist_add_head(&tramp->node, &state->head_tramps);
+	return tramp;
+}
+
+static void destroy_uprobe_trampoline(struct uprobe_trampoline *tramp)
+{
+	/*
+	 * We do not unmap and release uprobe trampoline page itself,
+	 * because there's no easy way to make sure none of the threads
+	 * is still inside the trampoline.
+	 */
+	hlist_del(&tramp->node);
+	kfree(tramp);
+}
+
+void arch_uprobe_init_state(struct mm_struct *mm)
+{
+	INIT_HLIST_HEAD(&mm->uprobes_state.head_tramps);
+}
+
+void arch_uprobe_clear_state(struct mm_struct *mm)
+{
+	struct uprobes_state *state = &mm->uprobes_state;
+	struct uprobe_trampoline *tramp;
+	struct hlist_node *n;
+
+	hlist_for_each_entry_safe(tramp, n, &state->head_tramps, node)
+		destroy_uprobe_trampoline(tramp);
+}
+
+static bool __in_uprobe_trampoline(unsigned long ip)
+{
+	struct vm_area_struct *vma = vma_lookup(current->mm, ip);
+
+	return vma && vma_is_special_mapping(vma, &tramp_mapping);
+}
+
+static bool in_uprobe_trampoline(unsigned long ip)
+{
+	struct mm_struct *mm = current->mm;
+	bool found, retry = true;
+	unsigned int seq;
+
+	rcu_read_lock();
+	if (mmap_lock_speculate_try_begin(mm, &seq)) {
+		found = __in_uprobe_trampoline(ip);
+		retry = mmap_lock_speculate_retry(mm, seq);
+	}
+	rcu_read_unlock();
+
+	if (retry) {
+		mmap_read_lock(mm);
+		found = __in_uprobe_trampoline(ip);
+		mmap_read_unlock(mm);
+	}
+	return found;
+}
+
+/*
+ * See uprobe syscall trampoline; the call to the trampoline will push
+ * the return address on the stack, the trampoline itself then pushes
+ * cx, r11 and ax.
+ */
+struct uprobe_syscall_args {
+	unsigned long ax;
+	unsigned long r11;
+	unsigned long cx;
+	unsigned long retaddr;
+};
+
+SYSCALL_DEFINE0(uprobe)
+{
+	struct pt_regs *regs = task_pt_regs(current);
+	struct uprobe_syscall_args args;
+	unsigned long ip, sp, sret;
+	int err;
+
+	/* Allow execution only from uprobe trampolines. */
+	if (!in_uprobe_trampoline(regs->ip))
+		return -ENXIO;
+
+	err = copy_from_user(&args, (void __user *)regs->sp, sizeof(args));
+	if (err)
+		goto sigill;
+
+	ip = regs->ip;
+
+	/*
+	 * expose the "right" values of ax/r11/cx/ip/sp to uprobe_consumer/s, plus:
+	 * - adjust ip to the probe address, call saved next instruction address
+	 * - adjust sp to the probe's stack frame (check trampoline code)
+	 */
+	regs->ax  = args.ax;
+	regs->r11 = args.r11;
+	regs->cx  = args.cx;
+	regs->ip  = args.retaddr - 5;
+	regs->sp += sizeof(args);
+	regs->orig_ax = -1;
+
+	sp = regs->sp;
+
+	err = shstk_pop((u64 *)&sret);
+	if (err == -EFAULT || (!err && sret != args.retaddr))
+		goto sigill;
+
+	handle_syscall_uprobe(regs, regs->ip);
+
+	/*
+	 * Some of the uprobe consumers has changed sp, we can do nothing,
+	 * just return via iret.
+	 */
+	if (regs->sp != sp) {
+		/* skip the trampoline call */
+		if (args.retaddr - 5 == regs->ip)
+			regs->ip += 5;
+		return regs->ax;
+	}
+
+	regs->sp -= sizeof(args);
+
+	/* for the case uprobe_consumer has changed ax/r11/cx */
+	args.ax  = regs->ax;
+	args.r11 = regs->r11;
+	args.cx  = regs->cx;
+
+	/* keep return address unless we are instructed otherwise */
+	if (args.retaddr - 5 != regs->ip)
+		args.retaddr = regs->ip;
+
+	if (shstk_push(args.retaddr) == -EFAULT)
+		goto sigill;
+
+	regs->ip = ip;
+
+	err = copy_to_user((void __user *)regs->sp, &args, sizeof(args));
+	if (err)
+		goto sigill;
+
+	/* ensure sysret, see do_syscall_64() */
+	regs->r11 = regs->flags;
+	regs->cx  = regs->ip;
+	return 0;
+
+sigill:
+	force_sig(SIGILL);
+	return -1;
+}
+
+asm (
+	".pushsection .rodata\n"
+	".balign " __stringify(PAGE_SIZE) "\n"
+	"uprobe_trampoline_entry:\n"
+	"push %rcx\n"
+	"push %r11\n"
+	"push %rax\n"
+	"mov $" __stringify(__NR_uprobe) ", %rax\n"
+	"syscall\n"
+	"pop %rax\n"
+	"pop %r11\n"
+	"pop %rcx\n"
+	"ret\n"
+	"int3\n"
+	".balign " __stringify(PAGE_SIZE) "\n"
+	".popsection\n"
+);
+
+extern u8 uprobe_trampoline_entry[];
+
+static int __init arch_uprobes_init(void)
+{
+	tramp_mapping_pages[0] = virt_to_page(uprobe_trampoline_entry);
+	return 0;
+}
+
+late_initcall(arch_uprobes_init);
+
+enum {
+	EXPECT_SWBP,
+	EXPECT_CALL,
+};
+
+struct write_opcode_ctx {
+	unsigned long base;
+	int expect;
+};
+
+static int is_call_insn(uprobe_opcode_t *insn)
+{
+	return *insn == CALL_INSN_OPCODE;
+}
+
+/*
+ * Verification callback used by int3_update uprobe_write calls to make sure
+ * the underlying instruction is as expected - either int3 or call.
+ */
+static int verify_insn(struct page *page, unsigned long vaddr, uprobe_opcode_t *new_opcode,
+		       int nbytes, void *data)
+{
+	struct write_opcode_ctx *ctx = data;
+	uprobe_opcode_t old_opcode[5];
+
+	uprobe_copy_from_page(page, ctx->base, (uprobe_opcode_t *) &old_opcode, 5);
+
+	switch (ctx->expect) {
+	case EXPECT_SWBP:
+		if (is_swbp_insn(&old_opcode[0]))
+			return 1;
+		break;
+	case EXPECT_CALL:
+		if (is_call_insn(&old_opcode[0]))
+			return 1;
+		break;
+	}
+
+	return -1;
+}
+
+/*
+ * Modify multi-byte instructions by using INT3 breakpoints on SMP.
+ * We completely avoid using stop_machine() here, and achieve the
+ * synchronization using INT3 breakpoints and SMP cross-calls.
+ * (borrowed comment from smp_text_poke_batch_finish)
+ *
+ * The way it is done:
+ *   - Add an INT3 trap to the address that will be patched
+ *   - SMP sync all CPUs
+ *   - Update all but the first byte of the patched range
+ *   - SMP sync all CPUs
+ *   - Replace the first byte (INT3) by the first byte of the replacing opcode
+ *   - SMP sync all CPUs
+ */
+static int int3_update(struct arch_uprobe *auprobe, struct vm_area_struct *vma,
+		       unsigned long vaddr, char *insn, bool optimize)
+{
+	uprobe_opcode_t int3 = UPROBE_SWBP_INSN;
+	struct write_opcode_ctx ctx = {
+		.base = vaddr,
+	};
+	int err;
+
+	/*
+	 * Write int3 trap.
+	 *
+	 * The swbp_optimize path comes with breakpoint already installed,
+	 * so we can skip this step for optimize == true.
+	 */
+	if (!optimize) {
+		ctx.expect = EXPECT_CALL;
+		err = uprobe_write(auprobe, vma, vaddr, &int3, 1, verify_insn,
+				   true /* is_register */, false /* do_update_ref_ctr */,
+				   &ctx);
+		if (err)
+			return err;
+	}
+
+	smp_text_poke_sync_each_cpu();
+
+	/* Write all but the first byte of the patched range. */
+	ctx.expect = EXPECT_SWBP;
+	err = uprobe_write(auprobe, vma, vaddr + 1, insn + 1, 4, verify_insn,
+			   true /* is_register */, false /* do_update_ref_ctr */,
+			   &ctx);
+	if (err)
+		return err;
+
+	smp_text_poke_sync_each_cpu();
+
+	/*
+	 * Write first byte.
+	 *
+	 * The swbp_unoptimize needs to finish uprobe removal together
+	 * with ref_ctr update, using uprobe_write with proper flags.
+	 */
+	err = uprobe_write(auprobe, vma, vaddr, insn, 1, verify_insn,
+			   optimize /* is_register */, !optimize /* do_update_ref_ctr */,
+			   &ctx);
+	if (err)
+		return err;
+
+	smp_text_poke_sync_each_cpu();
+	return 0;
+}
+
+static int swbp_optimize(struct arch_uprobe *auprobe, struct vm_area_struct *vma,
+			 unsigned long vaddr, unsigned long tramp)
+{
+	u8 call[5];
+
+	__text_gen_insn(call, CALL_INSN_OPCODE, (const void *) vaddr,
+			(const void *) tramp, CALL_INSN_SIZE);
+	return int3_update(auprobe, vma, vaddr, call, true /* optimize */);
+}
+
+static int swbp_unoptimize(struct arch_uprobe *auprobe, struct vm_area_struct *vma,
+			   unsigned long vaddr)
+{
+	return int3_update(auprobe, vma, vaddr, auprobe->insn, false /* optimize */);
+}
+
+static int copy_from_vaddr(struct mm_struct *mm, unsigned long vaddr, void *dst, int len)
+{
+	unsigned int gup_flags = FOLL_FORCE|FOLL_SPLIT_PMD;
+	struct vm_area_struct *vma;
+	struct page *page;
+
+	page = get_user_page_vma_remote(mm, vaddr, gup_flags, &vma);
+	if (IS_ERR(page))
+		return PTR_ERR(page);
+	uprobe_copy_from_page(page, vaddr, dst, len);
+	put_page(page);
+	return 0;
+}
+
+static bool __is_optimized(uprobe_opcode_t *insn, unsigned long vaddr)
+{
+	struct __packed __arch_relative_insn {
+		u8 op;
+		s32 raddr;
+	} *call = (struct __arch_relative_insn *) insn;
+
+	if (!is_call_insn(insn))
+		return false;
+	return __in_uprobe_trampoline(vaddr + 5 + call->raddr);
+}
+
+static int is_optimized(struct mm_struct *mm, unsigned long vaddr)
+{
+	uprobe_opcode_t insn[5];
+	int err;
+
+	err = copy_from_vaddr(mm, vaddr, &insn, 5);
+	if (err)
+		return err;
+	return __is_optimized((uprobe_opcode_t *)&insn, vaddr);
+}
+
+static bool should_optimize(struct arch_uprobe *auprobe)
+{
+	return !test_bit(ARCH_UPROBE_FLAG_OPTIMIZE_FAIL, &auprobe->flags) &&
+		test_bit(ARCH_UPROBE_FLAG_CAN_OPTIMIZE, &auprobe->flags);
+}
+
+int set_swbp(struct arch_uprobe *auprobe, struct vm_area_struct *vma,
+	     unsigned long vaddr)
+{
+	if (should_optimize(auprobe)) {
+		/*
+		 * We could race with another thread that already optimized the probe,
+		 * so let's not overwrite it with int3 again in this case.
+		 */
+		int ret = is_optimized(vma->vm_mm, vaddr);
+		if (ret < 0)
+			return ret;
+		if (ret)
+			return 0;
+	}
+	return uprobe_write_opcode(auprobe, vma, vaddr, UPROBE_SWBP_INSN,
+				   true /* is_register */);
+}
+
+int set_orig_insn(struct arch_uprobe *auprobe, struct vm_area_struct *vma,
+		  unsigned long vaddr)
+{
+	if (test_bit(ARCH_UPROBE_FLAG_CAN_OPTIMIZE, &auprobe->flags)) {
+		int ret = is_optimized(vma->vm_mm, vaddr);
+		if (ret < 0)
+			return ret;
+		if (ret) {
+			ret = swbp_unoptimize(auprobe, vma, vaddr);
+			WARN_ON_ONCE(ret);
+			return ret;
+		}
+	}
+	return uprobe_write_opcode(auprobe, vma, vaddr, *(uprobe_opcode_t *)&auprobe->insn,
+				   false /* is_register */);
+}
+
+static int __arch_uprobe_optimize(struct arch_uprobe *auprobe, struct mm_struct *mm,
+				  unsigned long vaddr)
+{
+	struct uprobe_trampoline *tramp;
+	struct vm_area_struct *vma;
+	bool new = false;
+	int err = 0;
+
+	vma = find_vma(mm, vaddr);
+	if (!vma)
+		return -EINVAL;
+	tramp = get_uprobe_trampoline(vaddr, &new);
+	if (!tramp)
+		return -EINVAL;
+	err = swbp_optimize(auprobe, vma, vaddr, tramp->vaddr);
+	if (WARN_ON_ONCE(err) && new)
+		destroy_uprobe_trampoline(tramp);
+	return err;
+}
+
+void arch_uprobe_optimize(struct arch_uprobe *auprobe, unsigned long vaddr)
+{
+	struct mm_struct *mm = current->mm;
+	uprobe_opcode_t insn[5];
+
+	if (!should_optimize(auprobe))
+		return;
+
+	mmap_write_lock(mm);
+
+	/*
+	 * Check if some other thread already optimized the uprobe for us,
+	 * if it's the case just go away silently.
+	 */
+	if (copy_from_vaddr(mm, vaddr, &insn, 5))
+		goto unlock;
+	if (!is_swbp_insn((uprobe_opcode_t*) &insn))
+		goto unlock;
+
+	/*
+	 * If we fail to optimize the uprobe we set the fail bit so the
+	 * above should_optimize will fail from now on.
+	 */
+	if (__arch_uprobe_optimize(auprobe, mm, vaddr))
+		set_bit(ARCH_UPROBE_FLAG_OPTIMIZE_FAIL, &auprobe->flags);
+
+unlock:
+	mmap_write_unlock(mm);
+}
+
+static bool insn_is_nop(struct insn *insn)
+{
+	return insn->opcode.nbytes == 1 && insn->opcode.bytes[0] == 0x90;
+}
+
+static bool insn_is_nopl(struct insn *insn)
+{
+	if (insn->opcode.nbytes != 2)
+		return false;
+
+	if (insn->opcode.bytes[0] != 0x0f || insn->opcode.bytes[1] != 0x1f)
+		return false;
+
+	if (!insn->modrm.nbytes)
+		return false;
+
+	if (X86_MODRM_REG(insn->modrm.bytes[0]) != 0)
+		return false;
+
+	/* 0f 1f /0 - NOPL */
+	return true;
+}
+
+static bool can_optimize(struct insn *insn, unsigned long vaddr)
+{
+	if (!insn->x86_64 || insn->length != 5)
+		return false;
+
+	if (!insn_is_nop(insn) && !insn_is_nopl(insn))
+		return false;
+
+	/* We can't do cross page atomic writes yet. */
+	return PAGE_SIZE - (vaddr & ~PAGE_MASK) >= 5;
+}
 #else /* 32-bit: */
 /*
  * No RIP-relative addressing on 32-bit
@@ -621,6 +1205,10 @@ static void riprel_pre_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
 static void riprel_post_xol(struct arch_uprobe *auprobe, struct pt_regs *regs)
 {
 }
+static bool can_optimize(struct insn *insn, unsigned long vaddr)
+{
+	return false;
+}
 #endif /* CONFIG_X86_64 */
 
 struct uprobe_xol_ops {
@@ -979,14 +1567,17 @@ static int push_setup_xol_ops(struct arch_uprobe *auprobe, struct insn *insn)
  */
 int arch_uprobe_analyze_insn(struct arch_uprobe *auprobe, struct mm_struct *mm, unsigned long addr)
 {
-	struct insn insn;
 	u8 fix_ip_or_call = UPROBE_FIX_IP;
+	struct insn insn;
 	int ret;
 
 	ret = uprobe_init_insn(auprobe, &insn, is_64bit_mm(mm));
 	if (ret)
 		return ret;
 
+	if (can_optimize(&insn, addr))
+		set_bit(ARCH_UPROBE_FLAG_CAN_OPTIMIZE, &auprobe->flags);
+
 	ret = branch_setup_xol_ops(auprobe, &insn);
 	if (ret != -ENOSYS)
 		return ret;
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 4fa0be732af1..d7af4a64c211 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -160,11 +160,6 @@ SECTIONS
 
 	} :text = 0xcccccccc
 
-	/* bootstrapping code */
-	.head.text : AT(ADDR(.head.text) - LOAD_OFFSET) {
-		HEAD_TEXT
-	} :text = 0xcccccccc
-
 	/* End of text section, which should occupy whole number of pages */
 	_etext = .;
 	. = ALIGN(PAGE_SIZE);
@@ -227,6 +222,8 @@ SECTIONS
 	 */
 	.altinstr_aux : AT(ADDR(.altinstr_aux) - LOAD_OFFSET) {
 		*(.altinstr_aux)
+		. = ALIGN(PAGE_SIZE);
+		__inittext_end = .;
 	}
 
 	INIT_DATA_SECTION(16)
@@ -535,3 +532,5 @@ xen_elfnote_entry_value =
 xen_elfnote_phys32_entry_value =
 	ABSOLUTE(xen_elfnote_phys32_entry) + ABSOLUTE(pvh_start_xen - LOAD_OFFSET);
 #endif
+
+#include "../boot/startup/exports.h"
diff --git a/arch/x86/kvm/lapic.c b/arch/x86/kvm/lapic.c
index 8172c2042dd6..5fc437341e03 100644
--- a/arch/x86/kvm/lapic.c
+++ b/arch/x86/kvm/lapic.c
@@ -810,6 +810,8 @@ static int __pv_send_ipi(unsigned long *ipi_bitmap, struct kvm_apic_map *map,
 	if (min > map->max_apic_id)
 		return 0;
 
+	min = array_index_nospec(min, map->max_apic_id + 1);
+
 	for_each_set_bit(i, ipi_bitmap,
 		min((u32)BITS_PER_LONG, (map->max_apic_id - min + 1))) {
 		if (map->phys_map[min + i]) {
diff --git a/arch/x86/kvm/pmu.h b/arch/x86/kvm/pmu.h
index ad89d0bd6005..103604c4b33b 100644
--- a/arch/x86/kvm/pmu.h
+++ b/arch/x86/kvm/pmu.h
@@ -13,7 +13,7 @@
 #define MSR_IA32_MISC_ENABLE_PMU_RO_MASK (MSR_IA32_MISC_ENABLE_PEBS_UNAVAIL |	\
 					  MSR_IA32_MISC_ENABLE_BTS_UNAVAIL)
 
-/* retrieve the 4 bits for EN and PMI out of IA32_FIXED_CTR_CTRL */
+/* retrieve a fixed counter bits out of IA32_FIXED_CTR_CTRL */
 #define fixed_ctrl_field(ctrl_reg, idx) \
 	(((ctrl_reg) >> ((idx) * INTEL_FIXED_BITS_STRIDE)) & INTEL_FIXED_BITS_MASK)
 
diff --git a/arch/x86/kvm/svm/sev.c b/arch/x86/kvm/svm/sev.c
index 2fbdebf79fbb..0635bd71c10e 100644
--- a/arch/x86/kvm/svm/sev.c
+++ b/arch/x86/kvm/svm/sev.c
@@ -719,13 +719,6 @@ static void sev_clflush_pages(struct page *pages[], unsigned long npages)
 static void sev_writeback_caches(struct kvm *kvm)
 {
 	/*
-	 * Note, the caller is responsible for ensuring correctness if the mask
-	 * can be modified, e.g. if a CPU could be doing VMRUN.
-	 */
-	if (cpumask_empty(to_kvm_sev_info(kvm)->have_run_cpus))
-		return;
-
-	/*
 	 * Ensure that all dirty guest tagged cache entries are written back
 	 * before releasing the pages back to the system for use.  CLFLUSH will
 	 * not do this without SME_COHERENT, and flushing many cache lines
@@ -739,6 +732,9 @@ static void sev_writeback_caches(struct kvm *kvm)
 	 * serializing multiple calls and having responding CPUs (to the IPI)
 	 * mark themselves as still running if they are running (or about to
 	 * run) a vCPU for the VM.
+	 *
+	 * Note, the caller is responsible for ensuring correctness if the mask
+	 * can be modified, e.g. if a CPU could be doing VMRUN.
 	 */
 	wbnoinvd_on_cpus_mask(to_kvm_sev_info(kvm)->have_run_cpus);
 }
diff --git a/arch/x86/kvm/svm/svm.c b/arch/x86/kvm/svm/svm.c
index d9931c6c4bc6..1bfebe40854f 100644
--- a/arch/x86/kvm/svm/svm.c
+++ b/arch/x86/kvm/svm/svm.c
@@ -4046,8 +4046,7 @@ static inline void sync_lapic_to_cr8(struct kvm_vcpu *vcpu)
 	struct vcpu_svm *svm = to_svm(vcpu);
 	u64 cr8;
 
-	if (nested_svm_virtualize_tpr(vcpu) ||
-	    kvm_vcpu_apicv_active(vcpu))
+	if (nested_svm_virtualize_tpr(vcpu))
 		return;
 
 	cr8 = kvm_get_cr8(vcpu);
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index a1c49bc681c4..706b6fd56d3c 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -9908,8 +9908,11 @@ static void kvm_sched_yield(struct kvm_vcpu *vcpu, unsigned long dest_id)
 	rcu_read_lock();
 	map = rcu_dereference(vcpu->kvm->arch.apic_map);
 
-	if (likely(map) && dest_id <= map->max_apic_id && map->phys_map[dest_id])
-		target = map->phys_map[dest_id]->vcpu;
+	if (likely(map) && dest_id <= map->max_apic_id) {
+		dest_id = array_index_nospec(dest_id, map->max_apic_id + 1);
+		if (map->phys_map[dest_id])
+			target = map->phys_map[dest_id]->vcpu;
+	}
 
 	rcu_read_unlock();
 
@@ -11008,6 +11011,15 @@ static int vcpu_enter_guest(struct kvm_vcpu *vcpu)
 		wrmsrq(MSR_IA32_XFD_ERR, 0);
 
 	/*
+	 * Mark this CPU as needing a branch predictor flush before running
+	 * userspace. Must be done before enabling preemption to ensure it gets
+	 * set for the CPU that actually ran the guest, and not the CPU that it
+	 * may migrate to.
+	 */
+	if (cpu_feature_enabled(X86_FEATURE_IBPB_EXIT_TO_USER))
+		this_cpu_write(x86_ibpb_exit_to_user, true);
+
+	/*
 	 * Consume any pending interrupts, including the possible source of
 	 * VM-Exit on SVM and any ticks that occur between VM-Exit and now.
 	 * An instruction is required after local_irq_enable() to fully unblock
diff --git a/arch/x86/lib/inat.c b/arch/x86/lib/inat.c
index b0f3b2a62ae2..a5cafd402cfd 100644
--- a/arch/x86/lib/inat.c
+++ b/arch/x86/lib/inat.c
@@ -81,3 +81,16 @@ insn_attr_t inat_get_avx_attribute(insn_byte_t opcode, insn_byte_t vex_m,
 	return table[opcode];
 }
 
+insn_attr_t inat_get_xop_attribute(insn_byte_t opcode, insn_byte_t map_select)
+{
+	const insn_attr_t *table;
+
+	if (map_select < X86_XOP_M_MIN || map_select > X86_XOP_M_MAX)
+		return 0;
+	map_select -= X86_XOP_M_MIN;
+	/* At first, this checks the master table */
+	table = inat_xop_tables[map_select];
+	if (!table)
+		return 0;
+	return table[opcode];
+}
diff --git a/arch/x86/lib/insn.c b/arch/x86/lib/insn.c
index 149a57e334ab..225af1399c9d 100644
--- a/arch/x86/lib/insn.c
+++ b/arch/x86/lib/insn.c
@@ -200,12 +200,15 @@ found:
 	}
 	insn->rex_prefix.got = 1;
 
-	/* Decode VEX prefix */
+	/* Decode VEX/XOP prefix */
 	b = peek_next(insn_byte_t, insn);
-	attr = inat_get_opcode_attribute(b);
-	if (inat_is_vex_prefix(attr)) {
+	if (inat_is_vex_prefix(attr) || inat_is_xop_prefix(attr)) {
 		insn_byte_t b2 = peek_nbyte_next(insn_byte_t, insn, 1);
-		if (!insn->x86_64) {
+
+		if (inat_is_xop_prefix(attr) && X86_MODRM_REG(b2) == 0) {
+			/* Grp1A.0 is always POP Ev */
+			goto vex_end;
+		} else if (!insn->x86_64) {
 			/*
 			 * In 32-bits mode, if the [7:6] bits (mod bits of
 			 * ModRM) on the second byte are not 11b, it is
@@ -226,13 +229,13 @@ found:
 			if (insn->x86_64 && X86_VEX_W(b2))
 				/* VEX.W overrides opnd_size */
 				insn->opnd_bytes = 8;
-		} else if (inat_is_vex3_prefix(attr)) {
+		} else if (inat_is_vex3_prefix(attr) || inat_is_xop_prefix(attr)) {
 			b2 = peek_nbyte_next(insn_byte_t, insn, 2);
 			insn_set_byte(&insn->vex_prefix, 2, b2);
 			insn->vex_prefix.nbytes = 3;
 			insn->next_byte += 3;
 			if (insn->x86_64 && X86_VEX_W(b2))
-				/* VEX.W overrides opnd_size */
+				/* VEX.W/XOP.W overrides opnd_size */
 				insn->opnd_bytes = 8;
 		} else {
 			/*
@@ -288,9 +291,22 @@ int insn_get_opcode(struct insn *insn)
 	insn_set_byte(opcode, 0, op);
 	opcode->nbytes = 1;
 
-	/* Check if there is VEX prefix or not */
-	if (insn_is_avx(insn)) {
+	/* Check if there is VEX/XOP prefix or not */
+	if (insn_is_avx_or_xop(insn)) {
 		insn_byte_t m, p;
+
+		/* XOP prefix has different encoding */
+		if (unlikely(avx_insn_is_xop(insn))) {
+			m = insn_xop_map_bits(insn);
+			insn->attr = inat_get_xop_attribute(op, m);
+			if (!inat_accept_xop(insn->attr)) {
+				insn->attr = 0;
+				return -EINVAL;
+			}
+			/* XOP has only 1 byte for opcode */
+			goto end;
+		}
+
 		m = insn_vex_m_bits(insn);
 		p = insn_vex_p_bits(insn);
 		insn->attr = inat_get_avx_attribute(op, m, p);
@@ -383,7 +399,8 @@ int insn_get_modrm(struct insn *insn)
 			pfx_id = insn_last_prefix_id(insn);
 			insn->attr = inat_get_group_attribute(mod, pfx_id,
 							      insn->attr);
-			if (insn_is_avx(insn) && !inat_accept_vex(insn->attr)) {
+			if (insn_is_avx_or_xop(insn) && !inat_accept_vex(insn->attr) &&
+			    !inat_accept_xop(insn->attr)) {
 				/* Bad insn */
 				insn->attr = 0;
 				return -EINVAL;
diff --git a/arch/x86/lib/retpoline.S b/arch/x86/lib/retpoline.S
index d78d769a02bd..f513d33b6d37 100644
--- a/arch/x86/lib/retpoline.S
+++ b/arch/x86/lib/retpoline.S
@@ -15,7 +15,6 @@
 
 	.section .text..__x86.indirect_thunk
 
-
 .macro POLINE reg
 	ANNOTATE_INTRA_FUNCTION_CALL
 	call    .Ldo_rop_\@
@@ -73,6 +72,7 @@ SYM_CODE_END(__x86_indirect_thunk_array)
 #undef GEN
 
 #ifdef CONFIG_MITIGATION_CALL_DEPTH_TRACKING
+
 .macro CALL_THUNK reg
 	.align RETPOLINE_THUNK_SIZE
 
@@ -126,7 +126,45 @@ SYM_CODE_END(__x86_indirect_jump_thunk_array)
 #define GEN(reg) __EXPORT_THUNK(__x86_indirect_jump_thunk_ ## reg)
 #include <asm/GEN-for-each-reg.h>
 #undef GEN
-#endif
+
+#endif /* CONFIG_MITIGATION_CALL_DEPTH_TRACKING */
+
+#ifdef CONFIG_MITIGATION_ITS
+
+.macro ITS_THUNK reg
+
+/*
+ * If CFI paranoid is used then the ITS thunk starts with opcodes (0xea; jne 1b)
+ * that complete the fineibt_paranoid caller sequence.
+ */
+1:	.byte 0xea
+SYM_INNER_LABEL(__x86_indirect_paranoid_thunk_\reg, SYM_L_GLOBAL)
+	UNWIND_HINT_UNDEFINED
+	ANNOTATE_NOENDBR
+	jne 1b
+SYM_INNER_LABEL(__x86_indirect_its_thunk_\reg, SYM_L_GLOBAL)
+	UNWIND_HINT_UNDEFINED
+	ANNOTATE_NOENDBR
+	ANNOTATE_RETPOLINE_SAFE
+	jmp *%\reg
+	int3
+	.align 32, 0xcc		/* fill to the end of the line */
+	.skip  32 - (__x86_indirect_its_thunk_\reg - 1b), 0xcc /* skip to the next upper half */
+.endm
+
+/* ITS mitigation requires thunks be aligned to upper half of cacheline */
+.align 64, 0xcc
+.skip 29, 0xcc
+
+#define GEN(reg) ITS_THUNK reg
+#include <asm/GEN-for-each-reg.h>
+#undef GEN
+
+	.align 64, 0xcc
+SYM_FUNC_ALIAS(__x86_indirect_its_thunk_array, __x86_indirect_its_thunk_rax)
+SYM_CODE_END(__x86_indirect_its_thunk_array)
+
+#endif /* CONFIG_MITIGATION_ITS */
 
 #ifdef CONFIG_MITIGATION_RETHUNK
 
@@ -370,39 +408,6 @@ SYM_FUNC_END(call_depth_return_thunk)
 
 #ifdef CONFIG_MITIGATION_ITS
 
-.macro ITS_THUNK reg
-
-/*
- * If CFI paranoid is used then the ITS thunk starts with opcodes (0xea; jne 1b)
- * that complete the fineibt_paranoid caller sequence.
- */
-1:	.byte 0xea
-SYM_INNER_LABEL(__x86_indirect_paranoid_thunk_\reg, SYM_L_GLOBAL)
-	UNWIND_HINT_UNDEFINED
-	ANNOTATE_NOENDBR
-	jne 1b
-SYM_INNER_LABEL(__x86_indirect_its_thunk_\reg, SYM_L_GLOBAL)
-	UNWIND_HINT_UNDEFINED
-	ANNOTATE_NOENDBR
-	ANNOTATE_RETPOLINE_SAFE
-	jmp *%\reg
-	int3
-	.align 32, 0xcc		/* fill to the end of the line */
-	.skip  32 - (__x86_indirect_its_thunk_\reg - 1b), 0xcc /* skip to the next upper half */
-.endm
-
-/* ITS mitigation requires thunks be aligned to upper half of cacheline */
-.align 64, 0xcc
-.skip 29, 0xcc
-
-#define GEN(reg) ITS_THUNK reg
-#include <asm/GEN-for-each-reg.h>
-#undef GEN
-
-	.align 64, 0xcc
-SYM_FUNC_ALIAS(__x86_indirect_its_thunk_array, __x86_indirect_its_thunk_rax)
-SYM_CODE_END(__x86_indirect_its_thunk_array)
-
 .align 64, 0xcc
 .skip 32, 0xcc
 SYM_CODE_START(its_return_thunk)
diff --git a/arch/x86/lib/x86-opcode-map.txt b/arch/x86/lib/x86-opcode-map.txt
index 262f7ca1fb95..2a4e69ecc2de 100644
--- a/arch/x86/lib/x86-opcode-map.txt
+++ b/arch/x86/lib/x86-opcode-map.txt
@@ -27,6 +27,11 @@
 #  (evo): this opcode is changed by EVEX prefix (EVEX opcode)
 #  (v): this opcode requires VEX prefix.
 #  (v1): this opcode only supports 128bit VEX.
+#  (xop): this opcode accepts XOP prefix.
+#
+# XOP Superscripts
+#  (W=0): this opcode requires XOP.W == 0
+#  (W=1): this opcode requires XOP.W == 1
 #
 # Last Prefix Superscripts
 #  - (66): the last prefix is 0x66
@@ -194,7 +199,7 @@ AVXcode:
 8c: MOV Ev,Sw
 8d: LEA Gv,M
 8e: MOV Sw,Ew
-8f: Grp1A (1A) | POP Ev (d64)
+8f: Grp1A (1A) | POP Ev (d64) | XOP (Prefix)
 # 0x90 - 0x9f
 90: NOP | PAUSE (F3) | XCHG r8,rAX
 91: XCHG rCX/r9,rAX
@@ -1106,6 +1111,84 @@ AVXcode: 7
 f8: URDMSR Rq,Id (F2),(v1),(11B) | UWRMSR Id,Rq (F3),(v1),(11B)
 EndTable
 
+# From AMD64 Architecture Programmer's Manual Vol3, Appendix A.1.5
+Table: XOP map 8h
+Referrer:
+XOPcode: 0
+85: VPMACSSWW Vo,Ho,Wo,Lo
+86: VPMACSSWD Vo,Ho,Wo,Lo
+87: VPMACSSDQL Vo,Ho,Wo,Lo
+8e: VPMACSSDD Vo,Ho,Wo,Lo
+8f: VPMACSSDQH Vo,Ho,Wo,Lo
+95: VPMACSWW Vo,Ho,Wo,Lo
+96: VPMACSWD Vo,Ho,Wo,Lo
+97: VPMACSDQL Vo,Ho,Wo,Lo
+9e: VPMACSDD Vo,Ho,Wo,Lo
+9f: VPMACSDQH Vo,Ho,Wo,Lo
+a2: VPCMOV Vx,Hx,Wx,Lx (W=0) | VPCMOV Vx,Hx,Lx,Wx (W=1)
+a3: VPPERM Vo,Ho,Wo,Lo (W=0) | VPPERM Vo,Ho,Lo,Wo (W=1)
+a6: VPMADCSSWD Vo,Ho,Wo,Lo
+b6: VPMADCSWD Vo,Ho,Wo,Lo
+c0: VPROTB Vo,Wo,Ib
+c1: VPROTW Vo,Wo,Ib
+c2: VPROTD Vo,Wo,Ib
+c3: VPROTQ Vo,Wo,Ib
+cc: VPCOMccB Vo,Ho,Wo,Ib
+cd: VPCOMccW Vo,Ho,Wo,Ib
+ce: VPCOMccD Vo,Ho,Wo,Ib
+cf: VPCOMccQ Vo,Ho,Wo,Ib
+ec: VPCOMccUB Vo,Ho,Wo,Ib
+ed: VPCOMccUW Vo,Ho,Wo,Ib
+ee: VPCOMccUD Vo,Ho,Wo,Ib
+ef: VPCOMccUQ Vo,Ho,Wo,Ib
+EndTable
+
+Table: XOP map 9h
+Referrer:
+XOPcode: 1
+01: GrpXOP1
+02: GrpXOP2
+12: GrpXOP3
+80: VFRCZPS Vx,Wx
+81: VFRCZPD Vx,Wx
+82: VFRCZSS Vq,Wss
+83: VFRCZSD Vq,Wsd
+90: VPROTB Vo,Wo,Ho (W=0) | VPROTB Vo,Ho,Wo (W=1)
+91: VPROTW Vo,Wo,Ho (W=0) | VPROTB Vo,Ho,Wo (W=1)
+92: VPROTD Vo,Wo,Ho (W=0) | VPROTB Vo,Ho,Wo (W=1)
+93: VPROTQ Vo,Wo,Ho (W=0) | VPROTB Vo,Ho,Wo (W=1)
+94: VPSHLB Vo,Wo,Ho (W=0) | VPSHLB Vo,Ho,Wo (W=1)
+95: VPSHLW Vo,Wo,Ho (W=0) | VPSHLW Vo,Ho,Wo (W=1)
+96: VPSHLD Vo,Wo,Ho (W=0) | VPSHLD Vo,Ho,Wo (W=1)
+97: VPSHLQ Vo,Wo,Ho (W=0) | VPSHLQ Vo,Ho,Wo (W=1)
+98: VPSHAB Vo,Wo,Ho (W=0) | VPSHAB Vo,Ho,Wo (W=1)
+99: VPSHAW Vo,Wo,Ho (W=0) | VPSHAW Vo,Ho,Wo (W=1)
+9a: VPSHAD Vo,Wo,Ho (W=0) | VPSHAD Vo,Ho,Wo (W=1)
+9b: VPSHAQ Vo,Wo,Ho (W=0) | VPSHAQ Vo,Ho,Wo (W=1)
+c1: VPHADDBW Vo,Wo
+c2: VPHADDBD Vo,Wo
+c3: VPHADDBQ Vo,Wo
+c6: VPHADDWD Vo,Wo
+c7: VPHADDWQ Vo,Wo
+cb: VPHADDDQ Vo,Wo
+d1: VPHADDUBWD Vo,Wo
+d2: VPHADDUBD Vo,Wo
+d3: VPHADDUBQ Vo,Wo
+d6: VPHADDUWD Vo,Wo
+d7: VPHADDUWQ Vo,Wo
+db: VPHADDUDQ Vo,Wo
+e1: VPHSUBBW Vo,Wo
+e2: VPHSUBWD Vo,Wo
+e3: VPHSUBDQ Vo,Wo
+EndTable
+
+Table: XOP map Ah
+Referrer:
+XOPcode: 2
+10: BEXTR Gy,Ey,Id
+12: GrpXOP4
+EndTable
+
 GrpTable: Grp1
 0: ADD
 1: OR
@@ -1320,3 +1403,29 @@ GrpTable: GrpRNG
 4: xcrypt-cfb
 5: xcrypt-ofb
 EndTable
+
+# GrpXOP1-4 is shown in AMD APM Vol.3 Appendix A as XOP group #1-4
+GrpTable: GrpXOP1
+1: BLCFILL By,Ey (xop)
+2: BLSFILL By,Ey (xop)
+3: BLCS By,Ey (xop)
+4: TZMSK By,Ey (xop)
+5: BLCIC By,Ey (xop)
+6: BLSIC By,Ey (xop)
+7: T1MSKC By,Ey (xop)
+EndTable
+
+GrpTable: GrpXOP2
+1: BLCMSK By,Ey (xop)
+6: BLCI By,Ey (xop)
+EndTable
+
+GrpTable: GrpXOP3
+0: LLWPCB Ry (xop)
+1: SLWPCB Ry (xop)
+EndTable
+
+GrpTable: GrpXOP4
+0: LWPINS By,Ed,Id (xop)
+1: LWPVAL By,Ed,Id (xop)
+EndTable
diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c
index 76e33bd7c556..b9426fce5f3e 100644
--- a/arch/x86/mm/init_64.c
+++ b/arch/x86/mm/init_64.c
@@ -224,6 +224,24 @@ static void sync_global_pgds(unsigned long start, unsigned long end)
 }
 
 /*
+ * Make kernel mappings visible in all page tables in the system.
+ * This is necessary except when the init task populates kernel mappings
+ * during the boot process. In that case, all processes originating from
+ * the init task copies the kernel mappings, so there is no issue.
+ * Otherwise, missing synchronization could lead to kernel crashes due
+ * to missing page table entries for certain kernel mappings.
+ *
+ * Synchronization is performed at the top level, which is the PGD in
+ * 5-level paging systems. But in 4-level paging systems, however,
+ * pgd_populate() is a no-op, so synchronization is done at the P4D level.
+ * sync_global_pgds() handles this difference between paging levels.
+ */
+void arch_sync_kernel_mappings(unsigned long start, unsigned long end)
+{
+	sync_global_pgds(start, end);
+}
+
+/*
  * NOTE: This function is marked __ref because it calls __init function
  * (alloc_bootmem_pages). It's safe to do it ONLY when after_bootmem == 0.
  */
diff --git a/arch/x86/mm/mem_encrypt_amd.c b/arch/x86/mm/mem_encrypt_amd.c
index faf3a13fb6ba..2f8c32173972 100644
--- a/arch/x86/mm/mem_encrypt_amd.c
+++ b/arch/x86/mm/mem_encrypt_amd.c
@@ -536,12 +536,6 @@ void __init sme_early_init(void)
 		x86_init.resources.dmi_setup = snp_dmi_setup;
 	}
 
-	/*
-	 * Switch the SVSM CA mapping (if active) from identity mapped to
-	 * kernel mapped.
-	 */
-	snp_update_svsm_ca();
-
 	if (sev_status & MSR_AMD64_SNP_SECURE_TSC)
 		setup_force_cpu_cap(X86_FEATURE_TSC_RELIABLE);
 }
diff --git a/arch/x86/mm/mem_encrypt_boot.S b/arch/x86/mm/mem_encrypt_boot.S
index f8a33b25ae86..edbf9c998848 100644
--- a/arch/x86/mm/mem_encrypt_boot.S
+++ b/arch/x86/mm/mem_encrypt_boot.S
@@ -16,7 +16,7 @@
 
 	.text
 	.code64
-SYM_FUNC_START(sme_encrypt_execute)
+SYM_FUNC_START(__pi_sme_encrypt_execute)
 
 	/*
 	 * Entry parameters:
@@ -69,9 +69,9 @@ SYM_FUNC_START(sme_encrypt_execute)
 	ANNOTATE_UNRET_SAFE
 	ret
 	int3
-SYM_FUNC_END(sme_encrypt_execute)
+SYM_FUNC_END(__pi_sme_encrypt_execute)
 
-SYM_FUNC_START(__enc_copy)
+SYM_FUNC_START_LOCAL(__enc_copy)
 	ANNOTATE_NOENDBR
 /*
  * Routine used to encrypt memory in place.
diff --git a/arch/x86/net/bpf_jit_comp.c b/arch/x86/net/bpf_jit_comp.c
index 7e3fca164620..fc13306af15f 100644
--- a/arch/x86/net/bpf_jit_comp.c
+++ b/arch/x86/net/bpf_jit_comp.c
@@ -8,6 +8,7 @@
 #include <linux/netdevice.h>
 #include <linux/filter.h>
 #include <linux/if_vlan.h>
+#include <linux/bitfield.h>
 #include <linux/bpf.h>
 #include <linux/memory.h>
 #include <linux/sort.h>
@@ -1151,11 +1152,38 @@ static void emit_ldx_index(u8 **pprog, u32 size, u32 dst_reg, u32 src_reg, u32 i
 	*pprog = prog;
 }
 
+static void emit_ldsx_index(u8 **pprog, u32 size, u32 dst_reg, u32 src_reg, u32 index_reg, int off)
+{
+	u8 *prog = *pprog;
+
+	switch (size) {
+	case BPF_B:
+		/* movsx rax, byte ptr [rax + r12 + off] */
+		EMIT3(add_3mod(0x48, src_reg, dst_reg, index_reg), 0x0F, 0xBE);
+		break;
+	case BPF_H:
+		/* movsx rax, word ptr [rax + r12 + off] */
+		EMIT3(add_3mod(0x48, src_reg, dst_reg, index_reg), 0x0F, 0xBF);
+		break;
+	case BPF_W:
+		/* movsx rax, dword ptr [rax + r12 + off] */
+		EMIT2(add_3mod(0x48, src_reg, dst_reg, index_reg), 0x63);
+		break;
+	}
+	emit_insn_suffix_SIB(&prog, src_reg, dst_reg, index_reg, off);
+	*pprog = prog;
+}
+
 static void emit_ldx_r12(u8 **pprog, u32 size, u32 dst_reg, u32 src_reg, int off)
 {
 	emit_ldx_index(pprog, size, dst_reg, src_reg, X86_REG_R12, off);
 }
 
+static void emit_ldsx_r12(u8 **prog, u32 size, u32 dst_reg, u32 src_reg, int off)
+{
+	emit_ldsx_index(prog, size, dst_reg, src_reg, X86_REG_R12, off);
+}
+
 /* STX: *(u8*)(dst_reg + off) = src_reg */
 static void emit_stx(u8 **pprog, u32 size, u32 dst_reg, u32 src_reg, int off)
 {
@@ -1388,16 +1416,67 @@ static int emit_atomic_ld_st_index(u8 **pprog, u32 atomic_op, u32 size,
 	return 0;
 }
 
+/*
+ * Metadata encoding for exception handling in JITed code.
+ *
+ * Format of `fixup` and `data` fields in `struct exception_table_entry`:
+ *
+ * Bit layout of `fixup` (32-bit):
+ *
+ * +-----------+--------+-----------+---------+----------+
+ * | 31        | 30-24  |   23-16   |   15-8  |    7-0   |
+ * |           |        |           |         |          |
+ * | ARENA_ACC | Unused | ARENA_REG | DST_REG | INSN_LEN |
+ * +-----------+--------+-----------+---------+----------+
+ *
+ * - INSN_LEN (8 bits): Length of faulting insn (max x86 insn = 15 bytes (fits in 8 bits)).
+ * - DST_REG  (8 bits): Offset of dst_reg from reg2pt_regs[] (max offset = 112 (fits in 8 bits)).
+ *                      This is set to DONT_CLEAR if the insn is a store.
+ * - ARENA_REG (8 bits): Offset of the register that is used to calculate the
+ *                       address for load/store when accessing the arena region.
+ * - ARENA_ACCESS (1 bit): This bit is set when the faulting instruction accessed the arena region.
+ *
+ * Bit layout of `data` (32-bit):
+ *
+ * +--------------+--------+--------------+
+ * |	31-16	  |  15-8  |     7-0      |
+ * |              |	   |              |
+ * | ARENA_OFFSET | Unused |  EX_TYPE_BPF |
+ * +--------------+--------+--------------+
+ *
+ * - ARENA_OFFSET (16 bits): Offset used to calculate the address for load/store when
+ *                           accessing the arena region.
+ */
+
 #define DONT_CLEAR 1
+#define FIXUP_INSN_LEN_MASK	GENMASK(7, 0)
+#define FIXUP_REG_MASK		GENMASK(15, 8)
+#define FIXUP_ARENA_REG_MASK	GENMASK(23, 16)
+#define FIXUP_ARENA_ACCESS	BIT(31)
+#define DATA_ARENA_OFFSET_MASK	GENMASK(31, 16)
 
 bool ex_handler_bpf(const struct exception_table_entry *x, struct pt_regs *regs)
 {
-	u32 reg = x->fixup >> 8;
+	u32 reg = FIELD_GET(FIXUP_REG_MASK, x->fixup);
+	u32 insn_len = FIELD_GET(FIXUP_INSN_LEN_MASK, x->fixup);
+	bool is_arena = !!(x->fixup & FIXUP_ARENA_ACCESS);
+	bool is_write = (reg == DONT_CLEAR);
+	unsigned long addr;
+	s16 off;
+	u32 arena_reg;
+
+	if (is_arena) {
+		arena_reg = FIELD_GET(FIXUP_ARENA_REG_MASK, x->fixup);
+		off = FIELD_GET(DATA_ARENA_OFFSET_MASK, x->data);
+		addr = *(unsigned long *)((void *)regs + arena_reg) + off;
+		bpf_prog_report_arena_violation(is_write, addr, regs->ip);
+	}
 
 	/* jump over faulting load and clear dest register */
 	if (reg != DONT_CLEAR)
 		*(unsigned long *)((void *)regs + reg) = 0;
-	regs->ip += x->fixup & 0xff;
+	regs->ip += insn_len;
+
 	return true;
 }
 
@@ -2057,19 +2136,27 @@ st:			if (is_imm8(insn->off))
 		case BPF_LDX | BPF_PROBE_MEM32 | BPF_H:
 		case BPF_LDX | BPF_PROBE_MEM32 | BPF_W:
 		case BPF_LDX | BPF_PROBE_MEM32 | BPF_DW:
+		case BPF_LDX | BPF_PROBE_MEM32SX | BPF_B:
+		case BPF_LDX | BPF_PROBE_MEM32SX | BPF_H:
+		case BPF_LDX | BPF_PROBE_MEM32SX | BPF_W:
 		case BPF_STX | BPF_PROBE_MEM32 | BPF_B:
 		case BPF_STX | BPF_PROBE_MEM32 | BPF_H:
 		case BPF_STX | BPF_PROBE_MEM32 | BPF_W:
 		case BPF_STX | BPF_PROBE_MEM32 | BPF_DW:
 			start_of_ldx = prog;
-			if (BPF_CLASS(insn->code) == BPF_LDX)
-				emit_ldx_r12(&prog, BPF_SIZE(insn->code), dst_reg, src_reg, insn->off);
-			else
+			if (BPF_CLASS(insn->code) == BPF_LDX) {
+				if (BPF_MODE(insn->code) == BPF_PROBE_MEM32SX)
+					emit_ldsx_r12(&prog, BPF_SIZE(insn->code), dst_reg, src_reg, insn->off);
+				else
+					emit_ldx_r12(&prog, BPF_SIZE(insn->code), dst_reg, src_reg, insn->off);
+			} else {
 				emit_stx_r12(&prog, BPF_SIZE(insn->code), dst_reg, src_reg, insn->off);
+			}
 populate_extable:
 			{
 				struct exception_table_entry *ex;
 				u8 *_insn = image + proglen + (start_of_ldx - temp);
+				u32 arena_reg, fixup_reg;
 				s64 delta;
 
 				if (!bpf_prog->aux->extable)
@@ -2089,8 +2176,29 @@ populate_extable:
 
 				ex->data = EX_TYPE_BPF;
 
-				ex->fixup = (prog - start_of_ldx) |
-					((BPF_CLASS(insn->code) == BPF_LDX ? reg2pt_regs[dst_reg] : DONT_CLEAR) << 8);
+				/*
+				 * src_reg/dst_reg holds the address in the arena region with upper
+				 * 32-bits being zero because of a preceding addr_space_cast(r<n>,
+				 * 0x0, 0x1) instruction. This address is adjusted with the addition
+				 * of arena_vm_start (see the implementation of BPF_PROBE_MEM32 and
+				 * BPF_PROBE_ATOMIC) before being used for the memory access. Pass
+				 * the reg holding the unmodified 32-bit address to
+				 * ex_handler_bpf().
+				 */
+				if (BPF_CLASS(insn->code) == BPF_LDX) {
+					arena_reg = reg2pt_regs[src_reg];
+					fixup_reg = reg2pt_regs[dst_reg];
+				} else {
+					arena_reg = reg2pt_regs[dst_reg];
+					fixup_reg = DONT_CLEAR;
+				}
+
+				ex->fixup = FIELD_PREP(FIXUP_INSN_LEN_MASK, prog - start_of_ldx) |
+					    FIELD_PREP(FIXUP_ARENA_REG_MASK, arena_reg) |
+					    FIELD_PREP(FIXUP_REG_MASK, fixup_reg);
+				ex->fixup |= FIXUP_ARENA_ACCESS;
+
+				ex->data |= FIELD_PREP(DATA_ARENA_OFFSET_MASK, insn->off);
 			}
 			break;
 
@@ -2208,7 +2316,8 @@ populate_extable:
 				 * End result: x86 insn "mov rbx, qword ptr [rax+0x14]"
 				 * of 4 bytes will be ignored and rbx will be zero inited.
 				 */
-				ex->fixup = (prog - start_of_ldx) | (reg2pt_regs[dst_reg] << 8);
+				ex->fixup = FIELD_PREP(FIXUP_INSN_LEN_MASK, prog - start_of_ldx) |
+					    FIELD_PREP(FIXUP_REG_MASK, reg2pt_regs[dst_reg]);
 			}
 			break;
 
diff --git a/arch/x86/platform/pvh/head.S b/arch/x86/platform/pvh/head.S
index 1d78e5631bb8..344030c1a81d 100644
--- a/arch/x86/platform/pvh/head.S
+++ b/arch/x86/platform/pvh/head.S
@@ -24,7 +24,7 @@
 #include <asm/nospec-branch.h>
 #include <xen/interface/elfnote.h>
 
-	__HEAD
+	__INIT
 
 /*
  * Entry point for PVH guests.
diff --git a/arch/x86/purgatory/Makefile b/arch/x86/purgatory/Makefile
index e0a607a14e7e..5ce1d4263000 100644
--- a/arch/x86/purgatory/Makefile
+++ b/arch/x86/purgatory/Makefile
@@ -57,7 +57,7 @@ ifdef CONFIG_MITIGATION_RETPOLINE
 PURGATORY_CFLAGS_REMOVE		+= $(RETPOLINE_CFLAGS)
 endif
 
-ifdef CONFIG_CFI_CLANG
+ifdef CONFIG_CFI
 PURGATORY_CFLAGS_REMOVE		+= $(CC_FLAGS_CFI)
 endif
 
diff --git a/arch/x86/tools/gen-insn-attr-x86.awk b/arch/x86/tools/gen-insn-attr-x86.awk
index 2c19d7fc8a85..7ea1b75e59b7 100644
--- a/arch/x86/tools/gen-insn-attr-x86.awk
+++ b/arch/x86/tools/gen-insn-attr-x86.awk
@@ -21,6 +21,7 @@ function clear_vars() {
 	eid = -1 # escape id
 	gid = -1 # group id
 	aid = -1 # AVX id
+	xopid = -1 # XOP id
 	tname = ""
 }
 
@@ -39,9 +40,11 @@ BEGIN {
 	ggid = 1
 	geid = 1
 	gaid = 0
+	gxopid = 0
 	delete etable
 	delete gtable
 	delete atable
+	delete xoptable
 
 	opnd_expr = "^[A-Za-z/]"
 	ext_expr = "^\\("
@@ -61,6 +64,7 @@ BEGIN {
 	imm_flag["Ob"] = "INAT_MOFFSET"
 	imm_flag["Ov"] = "INAT_MOFFSET"
 	imm_flag["Lx"] = "INAT_MAKE_IMM(INAT_IMM_BYTE)"
+	imm_flag["Lo"] = "INAT_MAKE_IMM(INAT_IMM_BYTE)"
 
 	modrm_expr = "^([CDEGMNPQRSUVW/][a-z]+|NTA|T[012])"
 	force64_expr = "\\([df]64\\)"
@@ -87,6 +91,8 @@ BEGIN {
 	evexonly_expr = "\\(ev\\)"
 	# (es) is the same as (ev) but also "SCALABLE" i.e. W and pp determine operand size
 	evex_scalable_expr = "\\(es\\)"
+	# All opcodes in XOP table or with (xop) superscript accept XOP prefix
+	xopok_expr = "\\(xop\\)"
 
 	prefix_expr = "\\(Prefix\\)"
 	prefix_num["Operand-Size"] = "INAT_PFX_OPNDSZ"
@@ -106,6 +112,7 @@ BEGIN {
 	prefix_num["VEX+2byte"] = "INAT_PFX_VEX3"
 	prefix_num["EVEX"] = "INAT_PFX_EVEX"
 	prefix_num["REX2"] = "INAT_PFX_REX2"
+	prefix_num["XOP"] = "INAT_PFX_XOP"
 
 	clear_vars()
 }
@@ -147,6 +154,7 @@ function array_size(arr,   i,c) {
 	if (NF != 1) {
 		# AVX/escape opcode table
 		aid = $2
+		xopid = -1
 		if (gaid <= aid)
 			gaid = aid + 1
 		if (tname == "")	# AVX only opcode table
@@ -156,6 +164,20 @@ function array_size(arr,   i,c) {
 		tname = "inat_primary_table"
 }
 
+/^XOPcode:/ {
+	if (NF != 1) {
+		# XOP opcode table
+		xopid = $2
+		aid = -1
+		if (gxopid <= xopid)
+			gxopid = xopid + 1
+		if (tname == "")	# XOP only opcode table
+			tname = sprintf("inat_xop_table_%d", $2)
+	}
+	if (xopid == -1 && eid == -1)	# primary opcode table
+		tname = "inat_primary_table"
+}
+
 /^GrpTable:/ {
 	print "/* " $0 " */"
 	if (!($2 in group))
@@ -206,6 +228,8 @@ function print_table(tbl,name,fmt,n)
 			etable[eid,0] = tname
 			if (aid >= 0)
 				atable[aid,0] = tname
+			else if (xopid >= 0)
+				xoptable[xopid] = tname
 		}
 		if (array_size(lptable1) != 0) {
 			print_table(lptable1,tname "_1[INAT_OPCODE_TABLE_SIZE]",
@@ -347,6 +371,8 @@ function convert_operands(count,opnd,       i,j,imm,mod)
 			flags = add_flags(flags, "INAT_VEXOK | INAT_VEXONLY")
 		else if (match(ext, vexok_expr) || match(opcode, vexok_opcode_expr))
 			flags = add_flags(flags, "INAT_VEXOK")
+		else if (match(ext, xopok_expr) || xopid >= 0)
+			flags = add_flags(flags, "INAT_XOPOK")
 
 		# check prefixes
 		if (match(ext, prefix_expr)) {
@@ -413,6 +439,14 @@ END {
 				print "	["i"]["j"] = "atable[i,j]","
 	print "};\n"
 
+	print "/* XOP opcode map array */"
+	print "const insn_attr_t * const inat_xop_tables[X86_XOP_M_MAX - X86_XOP_M_MIN + 1]" \
+	      " = {"
+	for (i = 0; i < gxopid; i++)
+		if (xoptable[i])
+			print "	["i"] = "xoptable[i]","
+	print "};"
+
 	print "#else /* !__BOOT_COMPRESSED */\n"
 
 	print "/* Escape opcode map array */"
@@ -430,6 +464,10 @@ END {
 	      "[INAT_LSTPFX_MAX + 1];"
 	print ""
 
+	print "/* XOP opcode map array */"
+	print "static const insn_attr_t *inat_xop_tables[X86_XOP_M_MAX - X86_XOP_M_MIN + 1];"
+	print ""
+
 	print "static void inat_init_tables(void)"
 	print "{"
 
@@ -455,6 +493,12 @@ END {
 			if (atable[i,j])
 				print "\tinat_avx_tables["i"]["j"] = "atable[i,j]";"
 
+	print ""
+	print "\t/* Print XOP opcode map array */"
+	for (i = 0; i < gxopid; i++)
+		if (xoptable[i])
+			print "\tinat_xop_tables["i"] = "xoptable[i]";"
+
 	print "}"
 	print "#endif"
 }
diff --git a/arch/x86/tools/relocs.c b/arch/x86/tools/relocs.c
index 5778bc498415..e5a2b9a912d1 100644
--- a/arch/x86/tools/relocs.c
+++ b/arch/x86/tools/relocs.c
@@ -740,10 +740,10 @@ static void walk_relocs(int (*process)(struct section *sec, Elf_Rel *rel,
 static int do_reloc64(struct section *sec, Elf_Rel *rel, ElfW(Sym) *sym,
 		      const char *symname)
 {
-	int headtext = !strcmp(sec_name(sec->shdr.sh_info), ".head.text");
 	unsigned r_type = ELF64_R_TYPE(rel->r_info);
 	ElfW(Addr) offset = rel->r_offset;
 	int shn_abs = (sym->st_shndx == SHN_ABS) && !is_reloc(S_REL, symname);
+
 	if (sym->st_shndx == SHN_UNDEF)
 		return 0;
 
@@ -783,12 +783,6 @@ static int do_reloc64(struct section *sec, Elf_Rel *rel, ElfW(Sym) *sym,
 			break;
 		}
 
-		if (headtext) {
-			die("Absolute reference to symbol '%s' not permitted in .head.text\n",
-			    symname);
-			break;
-		}
-
 		/*
 		 * Relocation offsets for 64 bit kernels are output
 		 * as 32 bits and sign extended back to 64 bits when
diff --git a/arch/x86/virt/svm/sev.c b/arch/x86/virt/svm/sev.c
index 942372e69b4d..ee643a6cd691 100644
--- a/arch/x86/virt/svm/sev.c
+++ b/arch/x86/virt/svm/sev.c
@@ -1029,7 +1029,7 @@ int rmp_make_shared(u64 pfn, enum pg_level level)
 }
 EXPORT_SYMBOL_GPL(rmp_make_shared);
 
-void snp_leak_pages(u64 pfn, unsigned int npages)
+void __snp_leak_pages(u64 pfn, unsigned int npages, bool dump_rmp)
 {
 	struct page *page = pfn_to_page(pfn);
 
@@ -1052,14 +1052,15 @@ void snp_leak_pages(u64 pfn, unsigned int npages)
 		    (PageHead(page) && compound_nr(page) <= npages))
 			list_add_tail(&page->buddy_list, &snp_leaked_pages_list);
 
-		dump_rmpentry(pfn);
+		if (dump_rmp)
+			dump_rmpentry(pfn);
 		snp_nr_leaked_pages++;
 		pfn++;
 		page++;
 	}
 	spin_unlock(&snp_leaked_pages_list_lock);
 }
-EXPORT_SYMBOL_GPL(snp_leak_pages);
+EXPORT_SYMBOL_GPL(__snp_leak_pages);
 
 void kdump_sev_callback(void)
 {
diff --git a/arch/x86/xen/Kconfig b/arch/x86/xen/Kconfig
index 98d8a50d2aed..aa4040fd9215 100644
--- a/arch/x86/xen/Kconfig
+++ b/arch/x86/xen/Kconfig
@@ -8,6 +8,7 @@ config XEN
 	depends on PARAVIRT
 	select PARAVIRT_CLOCK
 	select X86_HV_CALLBACK_VECTOR
+	select HIBERNATE_CALLBACKS
 	depends on X86_64 || (X86_32 && X86_PAE)
 	depends on X86_64 || (X86_GENERIC || MPENTIUM4 || MATOM)
 	depends on X86_LOCAL_APIC && X86_TSC
@@ -64,12 +65,6 @@ config XEN_PVHVM_GUEST
 	help
 	  Support running as a Xen PVHVM guest.
 
-config XEN_SAVE_RESTORE
-	bool
-	depends on XEN
-	select HIBERNATE_CALLBACKS
-	default y
-
 config XEN_DEBUG_FS
 	bool "Enable Xen debug and tuning parameters in debugfs"
 	depends on XEN && DEBUG_FS
diff --git a/arch/x86/xen/enlighten_pv.c b/arch/x86/xen/enlighten_pv.c
index 26bbaf4b7330..4806cc28d7ca 100644
--- a/arch/x86/xen/enlighten_pv.c
+++ b/arch/x86/xen/enlighten_pv.c
@@ -382,7 +382,6 @@ static bool __init xen_check_xsave(void)
 
 static void __init xen_init_capabilities(void)
 {
-	setup_force_cpu_cap(X86_FEATURE_XENPV);
 	setup_clear_cpu_cap(X86_FEATURE_DCA);
 	setup_clear_cpu_cap(X86_FEATURE_APERFMPERF);
 	setup_clear_cpu_cap(X86_FEATURE_MTRR);
@@ -1402,6 +1401,7 @@ asmlinkage __visible void __init xen_start_kernel(struct start_info *si)
 			JMP32_INSN_SIZE);
 
 	xen_domain_type = XEN_PV_DOMAIN;
+	setup_force_cpu_cap(X86_FEATURE_XENPV);
 	xen_start_flags = xen_start_info->flags;
 	/* Interrupts are guaranteed to be off initially. */
 	early_boot_irqs_disabled = true;
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index c4c479373249..3be45bf4bc79 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -41,7 +41,7 @@ EXPORT_SYMBOL_GPL(arbitrary_virt_to_machine);
 int xen_unmap_domain_gfn_range(struct vm_area_struct *vma,
 			       int nr, struct page **pages)
 {
-	if (xen_feature(XENFEAT_auto_translated_physmap))
+	if (!xen_pv_domain())
 		return xen_xlate_unmap_gfn_range(vma, nr, pages);
 
 	if (!pages)
diff --git a/arch/x86/xen/p2m.c b/arch/x86/xen/p2m.c
index 56914e21e303..2dd12b61a230 100644
--- a/arch/x86/xen/p2m.c
+++ b/arch/x86/xen/p2m.c
@@ -686,7 +686,7 @@ int set_foreign_p2m_mapping(struct gnttab_map_grant_ref *map_ops,
 	int i, ret = 0;
 	pte_t *pte;
 
-	if (xen_feature(XENFEAT_auto_translated_physmap))
+	if (!xen_pv_domain())
 		return 0;
 
 	if (kmap_ops) {
@@ -769,7 +769,7 @@ int clear_foreign_p2m_mapping(struct gnttab_unmap_grant_ref *unmap_ops,
 {
 	int i, ret = 0;
 
-	if (xen_feature(XENFEAT_auto_translated_physmap))
+	if (!xen_pv_domain())
 		return 0;
 
 	for (i = 0; i < count; i++) {
diff --git a/arch/xtensa/include/asm/bitops.h b/arch/xtensa/include/asm/bitops.h
index e02ec5833389..f7390b6761e1 100644
--- a/arch/xtensa/include/asm/bitops.h
+++ b/arch/xtensa/include/asm/bitops.h
@@ -37,7 +37,7 @@ static inline unsigned long __cntlz (unsigned long x)
  * bit 0 is the LSB of addr; bit 32 is the LSB of (addr+1).
  */
 
-static inline int ffz(unsigned long x)
+static inline int __attribute_const__ ffz(unsigned long x)
 {
 	return 31 - __cntlz(~x & -~x);
 }
@@ -46,7 +46,7 @@ static inline int ffz(unsigned long x)
  * __ffs: Find first bit set in word. Return 0 for bit 0
  */
 
-static inline unsigned long __ffs(unsigned long x)
+static inline __attribute_const__ unsigned long __ffs(unsigned long x)
 {
 	return 31 - __cntlz(x & -x);
 }
@@ -57,7 +57,7 @@ static inline unsigned long __ffs(unsigned long x)
  * differs in spirit from the above ffz (man ffs).
  */
 
-static inline int ffs(unsigned long x)
+static inline __attribute_const__ int ffs(unsigned long x)
 {
 	return 32 - __cntlz(x & -x);
 }
@@ -67,7 +67,7 @@ static inline int ffs(unsigned long x)
  * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32.
  */
 
-static inline int fls (unsigned int x)
+static inline __attribute_const__ int fls (unsigned int x)
 {
 	return 32 - __cntlz(x);
 }
@@ -78,7 +78,7 @@ static inline int fls (unsigned int x)
  *
  * Undefined if no set bit exists, so code should check against 0 first.
  */
-static inline unsigned long __fls(unsigned long word)
+static inline __attribute_const__ unsigned long __fls(unsigned long word)
 {
 	return 31 - __cntlz(word);
 }
diff --git a/arch/xtensa/kernel/asm-offsets.c b/arch/xtensa/kernel/asm-offsets.c
index da38de20ae59..cfbced95e944 100644
--- a/arch/xtensa/kernel/asm-offsets.c
+++ b/arch/xtensa/kernel/asm-offsets.c
@@ -11,6 +11,7 @@
  *
  * Chris Zankel <chris@zankel.net>
  */
+#define COMPILE_OFFSETS
 
 #include <asm/processor.h>
 #include <asm/coprocessor.h>
diff --git a/arch/xtensa/kernel/process.c b/arch/xtensa/kernel/process.c
index 7bd66677f7b6..94d43f44be13 100644
--- a/arch/xtensa/kernel/process.c
+++ b/arch/xtensa/kernel/process.c
@@ -267,7 +267,7 @@ int arch_dup_task_struct(struct task_struct *dst, struct task_struct *src)
 
 int copy_thread(struct task_struct *p, const struct kernel_clone_args *args)
 {
-	unsigned long clone_flags = args->flags;
+	u64 clone_flags = args->flags;
 	unsigned long usp_thread_fn = args->stack;
 	unsigned long tls = args->tls;
 	struct pt_regs *childregs = task_pt_regs(p);