diff options
Diffstat (limited to 'drivers/acpi')
| -rw-r--r-- | drivers/acpi/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/acpi/nfit/core.c | 2 | ||||
| -rw-r--r-- | drivers/acpi/numa/hmat.c | 34 | ||||
| -rw-r--r-- | drivers/acpi/property.c | 128 | ||||
| -rw-r--r-- | drivers/acpi/riscv/irq.c | 75 | ||||
| -rw-r--r-- | drivers/acpi/scan.c | 2 |
6 files changed, 150 insertions, 93 deletions
diff --git a/drivers/acpi/Kconfig b/drivers/acpi/Kconfig index 2cdbd08b30e4..ca00a5dbcf75 100644 --- a/drivers/acpi/Kconfig +++ b/drivers/acpi/Kconfig @@ -461,7 +461,7 @@ config ACPI_HED config ACPI_BGRT bool "Boottime Graphics Resource Table support" - depends on EFI && (X86 || ARM64 || LOONGARCH) + depends on EFI help This driver adds support for exposing the ACPI Boottime Graphics Resource Table, which allows the operating system to obtain diff --git a/drivers/acpi/nfit/core.c b/drivers/acpi/nfit/core.c index ae035b93da08..3eb56b77cb6d 100644 --- a/drivers/acpi/nfit/core.c +++ b/drivers/acpi/nfit/core.c @@ -2637,7 +2637,7 @@ static int acpi_nfit_register_region(struct acpi_nfit_desc *acpi_desc, if (ndr_desc->target_node == NUMA_NO_NODE) { ndr_desc->target_node = phys_to_target_node(spa->address); dev_info(acpi_desc->dev, "changing target node from %d to %d for nfit region [%pa-%pa]", - NUMA_NO_NODE, ndr_desc->numa_node, &res.start, &res.end); + NUMA_NO_NODE, ndr_desc->target_node, &res.start, &res.end); } /* diff --git a/drivers/acpi/numa/hmat.c b/drivers/acpi/numa/hmat.c index 4958301f5417..5a36d57289b4 100644 --- a/drivers/acpi/numa/hmat.c +++ b/drivers/acpi/numa/hmat.c @@ -74,7 +74,6 @@ struct memory_target { struct node_cache_attrs cache_attrs; u8 gen_port_device_handle[ACPI_SRAT_DEVICE_HANDLE_SIZE]; bool registered; - bool ext_updated; /* externally updated */ }; struct memory_initiator { @@ -368,35 +367,6 @@ static void hmat_update_target_access(struct memory_target *target, } } -int hmat_update_target_coordinates(int nid, struct access_coordinate *coord, - enum access_coordinate_class access) -{ - struct memory_target *target; - int pxm; - - if (nid == NUMA_NO_NODE) - return -EINVAL; - - pxm = node_to_pxm(nid); - guard(mutex)(&target_lock); - target = find_mem_target(pxm); - if (!target) - return -ENODEV; - - hmat_update_target_access(target, ACPI_HMAT_READ_LATENCY, - coord->read_latency, access); - hmat_update_target_access(target, ACPI_HMAT_WRITE_LATENCY, - coord->write_latency, access); - hmat_update_target_access(target, ACPI_HMAT_READ_BANDWIDTH, - coord->read_bandwidth, access); - hmat_update_target_access(target, ACPI_HMAT_WRITE_BANDWIDTH, - coord->write_bandwidth, access); - target->ext_updated = true; - - return 0; -} -EXPORT_SYMBOL_GPL(hmat_update_target_coordinates); - static __init void hmat_add_locality(struct acpi_hmat_locality *hmat_loc) { struct memory_locality *loc; @@ -773,10 +743,6 @@ static void hmat_update_target_attrs(struct memory_target *target, u32 best = 0; int i; - /* Don't update if an external agent has changed the data. */ - if (target->ext_updated) - return; - /* Don't update for generic port if there's no device handle */ if ((access == NODE_ACCESS_CLASS_GENPORT_SINK_LOCAL || access == NODE_ACCESS_CLASS_GENPORT_SINK_CPU) && diff --git a/drivers/acpi/property.c b/drivers/acpi/property.c index 54baa23a9e5a..b261dbb16230 100644 --- a/drivers/acpi/property.c +++ b/drivers/acpi/property.c @@ -844,13 +844,35 @@ acpi_fwnode_get_named_child_node(const struct fwnode_handle *fwnode, return NULL; } +static unsigned int acpi_fwnode_get_args_count(struct fwnode_handle *fwnode, + const char *nargs_prop) +{ + const struct acpi_device_data *data; + const union acpi_object *obj; + int ret; + + data = acpi_device_data_of_node(fwnode); + if (!data) + return 0; + + ret = acpi_data_get_property(data, nargs_prop, ACPI_TYPE_INTEGER, &obj); + if (ret) + return 0; + + return obj->integer.value; +} + static int acpi_get_ref_args(struct fwnode_reference_args *args, struct fwnode_handle *ref_fwnode, + const char *nargs_prop, const union acpi_object **element, const union acpi_object *end, size_t num_args) { u32 nargs = 0, i; + if (nargs_prop) + num_args = acpi_fwnode_get_args_count(ref_fwnode, nargs_prop); + /* * Assume the following integer elements are all args. Stop counting on * the first reference (possibly represented as a string) or end of the @@ -922,45 +944,10 @@ static struct fwnode_handle *acpi_parse_string_ref(const struct fwnode_handle *f return &dn->fwnode; } -/** - * __acpi_node_get_property_reference - returns handle to the referenced object - * @fwnode: Firmware node to get the property from - * @propname: Name of the property - * @index: Index of the reference to return - * @num_args: Maximum number of arguments after each reference - * @args: Location to store the returned reference with optional arguments - * (may be NULL) - * - * Find property with @name, verifify that it is a package containing at least - * one object reference and if so, store the ACPI device object pointer to the - * target object in @args->adev. If the reference includes arguments, store - * them in the @args->args[] array. - * - * If there's more than one reference in the property value package, @index is - * used to select the one to return. - * - * It is possible to leave holes in the property value set like in the - * example below: - * - * Package () { - * "cs-gpios", - * Package () { - * ^GPIO, 19, 0, 0, - * ^GPIO, 20, 0, 0, - * 0, - * ^GPIO, 21, 0, 0, - * } - * } - * - * Calling this function with index %2 or index %3 return %-ENOENT. If the - * property does not contain any more values %-ENOENT is returned. The NULL - * entry must be single integer and preferably contain value %0. - * - * Return: %0 on success, negative error code on failure. - */ -int __acpi_node_get_property_reference(const struct fwnode_handle *fwnode, - const char *propname, size_t index, size_t num_args, - struct fwnode_reference_args *args) +static int acpi_fwnode_get_reference_args(const struct fwnode_handle *fwnode, + const char *propname, const char *nargs_prop, + unsigned int args_count, unsigned int index, + struct fwnode_reference_args *args) { const union acpi_object *element, *end; const union acpi_object *obj; @@ -1036,10 +1023,10 @@ int __acpi_node_get_property_reference(const struct fwnode_handle *fwnode, return -EINVAL; element++; - ret = acpi_get_ref_args(idx == index ? args : NULL, acpi_fwnode_handle(device), - &element, end, num_args); + nargs_prop, &element, end, + args_count); if (ret < 0) return ret; @@ -1054,10 +1041,9 @@ int __acpi_node_get_property_reference(const struct fwnode_handle *fwnode, return -EINVAL; element++; - ret = acpi_get_ref_args(idx == index ? args : NULL, - ref_fwnode, &element, end, - num_args); + ref_fwnode, nargs_prop, &element, end, + args_count); if (ret < 0) return ret; @@ -1079,6 +1065,50 @@ int __acpi_node_get_property_reference(const struct fwnode_handle *fwnode, return -ENOENT; } + +/** + * __acpi_node_get_property_reference - returns handle to the referenced object + * @fwnode: Firmware node to get the property from + * @propname: Name of the property + * @index: Index of the reference to return + * @num_args: Maximum number of arguments after each reference + * @args: Location to store the returned reference with optional arguments + * (may be NULL) + * + * Find property with @name, verifify that it is a package containing at least + * one object reference and if so, store the ACPI device object pointer to the + * target object in @args->adev. If the reference includes arguments, store + * them in the @args->args[] array. + * + * If there's more than one reference in the property value package, @index is + * used to select the one to return. + * + * It is possible to leave holes in the property value set like in the + * example below: + * + * Package () { + * "cs-gpios", + * Package () { + * ^GPIO, 19, 0, 0, + * ^GPIO, 20, 0, 0, + * 0, + * ^GPIO, 21, 0, 0, + * } + * } + * + * Calling this function with index %2 or index %3 return %-ENOENT. If the + * property does not contain any more values %-ENOENT is returned. The NULL + * entry must be single integer and preferably contain value %0. + * + * Return: %0 on success, negative error code on failure. + */ +int __acpi_node_get_property_reference(const struct fwnode_handle *fwnode, + const char *propname, size_t index, + size_t num_args, + struct fwnode_reference_args *args) +{ + return acpi_fwnode_get_reference_args(fwnode, propname, NULL, index, num_args, args); +} EXPORT_SYMBOL_GPL(__acpi_node_get_property_reference); static int acpi_data_prop_read_single(const struct acpi_device_data *data, @@ -1598,16 +1628,6 @@ acpi_fwnode_property_read_string_array(const struct fwnode_handle *fwnode, val, nval); } -static int -acpi_fwnode_get_reference_args(const struct fwnode_handle *fwnode, - const char *prop, const char *nargs_prop, - unsigned int args_count, unsigned int index, - struct fwnode_reference_args *args) -{ - return __acpi_node_get_property_reference(fwnode, prop, index, - args_count, args); -} - static const char *acpi_fwnode_get_name(const struct fwnode_handle *fwnode) { const struct acpi_device *adev; diff --git a/drivers/acpi/riscv/irq.c b/drivers/acpi/riscv/irq.c index cced960c2aef..d9a2154d6c6a 100644 --- a/drivers/acpi/riscv/irq.c +++ b/drivers/acpi/riscv/irq.c @@ -10,6 +10,8 @@ #include "init.h" +#define RISCV_ACPI_INTC_FLAG_PENDING BIT(0) + struct riscv_ext_intc_list { acpi_handle handle; u32 gsi_base; @@ -17,6 +19,7 @@ struct riscv_ext_intc_list { u32 nr_idcs; u32 id; u32 type; + u32 flag; struct list_head list; }; @@ -69,6 +72,22 @@ static acpi_status riscv_acpi_update_gsi_handle(u32 gsi_base, acpi_handle handle return AE_NOT_FOUND; } +int riscv_acpi_update_gsi_range(u32 gsi_base, u32 nr_irqs) +{ + struct riscv_ext_intc_list *ext_intc_element; + + list_for_each_entry(ext_intc_element, &ext_intc_list, list) { + if (gsi_base == ext_intc_element->gsi_base && + (ext_intc_element->flag & RISCV_ACPI_INTC_FLAG_PENDING)) { + ext_intc_element->nr_irqs = nr_irqs; + ext_intc_element->flag &= ~RISCV_ACPI_INTC_FLAG_PENDING; + return 0; + } + } + + return -ENODEV; +} + int riscv_acpi_get_gsi_info(struct fwnode_handle *fwnode, u32 *gsi_base, u32 *id, u32 *nr_irqs, u32 *nr_idcs) { @@ -115,20 +134,67 @@ struct fwnode_handle *riscv_acpi_get_gsi_domain_id(u32 gsi) static int __init riscv_acpi_register_ext_intc(u32 gsi_base, u32 nr_irqs, u32 nr_idcs, u32 id, u32 type) { - struct riscv_ext_intc_list *ext_intc_element; + struct riscv_ext_intc_list *ext_intc_element, *node, *prev; ext_intc_element = kzalloc(sizeof(*ext_intc_element), GFP_KERNEL); if (!ext_intc_element) return -ENOMEM; ext_intc_element->gsi_base = gsi_base; - ext_intc_element->nr_irqs = nr_irqs; + + /* If nr_irqs is zero, indicate it in flag and set to max range possible */ + if (nr_irqs) { + ext_intc_element->nr_irqs = nr_irqs; + } else { + ext_intc_element->flag |= RISCV_ACPI_INTC_FLAG_PENDING; + ext_intc_element->nr_irqs = U32_MAX - ext_intc_element->gsi_base; + } + ext_intc_element->nr_idcs = nr_idcs; ext_intc_element->id = id; - list_add_tail(&ext_intc_element->list, &ext_intc_list); + list_for_each_entry(node, &ext_intc_list, list) { + if (node->gsi_base < ext_intc_element->gsi_base) + break; + } + + /* Adjust the previous node's GSI range if that has pending registration */ + prev = list_prev_entry(node, list); + if (!list_entry_is_head(prev, &ext_intc_list, list)) { + if (prev->flag & RISCV_ACPI_INTC_FLAG_PENDING) + prev->nr_irqs = ext_intc_element->gsi_base - prev->gsi_base; + } + + list_add_tail(&ext_intc_element->list, &node->list); return 0; } +static acpi_status __init riscv_acpi_create_gsi_map_smsi(acpi_handle handle, u32 level, + void *context, void **return_value) +{ + acpi_status status; + u64 gbase; + + if (!acpi_has_method(handle, "_GSB")) { + acpi_handle_err(handle, "_GSB method not found\n"); + return AE_ERROR; + } + + status = acpi_evaluate_integer(handle, "_GSB", NULL, &gbase); + if (ACPI_FAILURE(status)) { + acpi_handle_err(handle, "failed to evaluate _GSB method\n"); + return status; + } + + riscv_acpi_register_ext_intc(gbase, 0, 0, 0, ACPI_RISCV_IRQCHIP_SMSI); + status = riscv_acpi_update_gsi_handle((u32)gbase, handle); + if (ACPI_FAILURE(status)) { + acpi_handle_err(handle, "failed to find the GSI mapping entry\n"); + return status; + } + + return AE_OK; +} + static acpi_status __init riscv_acpi_create_gsi_map(acpi_handle handle, u32 level, void *context, void **return_value) { @@ -183,6 +249,9 @@ void __init riscv_acpi_init_gsi_mapping(void) if (acpi_table_parse_madt(ACPI_MADT_TYPE_APLIC, riscv_acpi_aplic_parse_madt, 0) > 0) acpi_get_devices("RSCV0002", riscv_acpi_create_gsi_map, NULL, NULL); + + /* Unlike PLIC/APLIC, SYSMSI doesn't have MADT */ + acpi_get_devices("RSCV0006", riscv_acpi_create_gsi_map_smsi, NULL, NULL); } static acpi_handle riscv_acpi_get_gsi_handle(u32 gsi) diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 065abe56f440..ef16d58b2949 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -861,6 +861,8 @@ static const char * const acpi_honor_dep_ids[] = { "INTC10CF", /* IVSC (MTL) driver must be loaded to allow i2c access to camera sensors */ "RSCV0001", /* RISC-V PLIC */ "RSCV0002", /* RISC-V APLIC */ + "RSCV0005", /* RISC-V SBI MPXY MBOX */ + "RSCV0006", /* RISC-V RPMI SYSMSI */ "PNP0C0F", /* PCI Link Device */ NULL }; |