diff options
Diffstat (limited to 'drivers/clocksource/timer-ti-dm.c')
| -rw-r--r-- | drivers/clocksource/timer-ti-dm.c | 119 |
1 files changed, 117 insertions, 2 deletions
diff --git a/drivers/clocksource/timer-ti-dm.c b/drivers/clocksource/timer-ti-dm.c index e9e32df6b566..793e7cdcb1b1 100644 --- a/drivers/clocksource/timer-ti-dm.c +++ b/drivers/clocksource/timer-ti-dm.c @@ -31,6 +31,7 @@ #include <linux/platform_data/dmtimer-omap.h> #include <clocksource/timer-ti-dm.h> +#include <linux/delay.h> /* * timer errata flags @@ -836,6 +837,48 @@ static int omap_dm_timer_set_match(struct omap_dm_timer *cookie, int enable, return 0; } +static int omap_dm_timer_set_cap(struct omap_dm_timer *cookie, + int autoreload, bool config_period) +{ + struct dmtimer *timer; + struct device *dev; + int rc; + u32 l; + + timer = to_dmtimer(cookie); + if (unlikely(!timer)) + return -EINVAL; + + dev = &timer->pdev->dev; + rc = pm_runtime_resume_and_get(dev); + if (rc) + return rc; + /* + * 1. Select autoreload mode. TIMER_TCLR[1] AR bit. + * 2. TIMER_TCLR[14]: Sets the functionality of the TIMER IO pin. + * 3. TIMER_TCLR[13] : Capture mode select bit. + * 3. TIMER_TCLR[9-8] : Select transition capture mode. + */ + + l = dmtimer_read(timer, OMAP_TIMER_CTRL_REG); + + if (autoreload) + l |= OMAP_TIMER_CTRL_AR; + + l |= OMAP_TIMER_CTRL_CAPTMODE | OMAP_TIMER_CTRL_GPOCFG; + + if (config_period == true) + l |= OMAP_TIMER_CTRL_TCM_LOWTOHIGH; /* Time Period config */ + else + l |= OMAP_TIMER_CTRL_TCM_BOTHEDGES; /* Duty Cycle config */ + + dmtimer_write(timer, OMAP_TIMER_CTRL_REG, l); + + pm_runtime_put_sync(dev); + + return 0; +} + static int omap_dm_timer_set_pwm(struct omap_dm_timer *cookie, int def_on, int toggle, int trigger, int autoreload) { @@ -1023,23 +1066,92 @@ static unsigned int omap_dm_timer_read_counter(struct omap_dm_timer *cookie) return __omap_dm_timer_read_counter(timer); } +static inline unsigned int __omap_dm_timer_cap(struct dmtimer *timer, int idx) +{ + return idx == 0 ? dmtimer_read(timer, OMAP_TIMER_CAPTURE_REG) : + dmtimer_read(timer, OMAP_TIMER_CAPTURE2_REG); +} + static int omap_dm_timer_write_counter(struct omap_dm_timer *cookie, unsigned int value) { struct dmtimer *timer; + struct device *dev; timer = to_dmtimer(cookie); - if (unlikely(!timer || !atomic_read(&timer->enabled))) { - pr_err("%s: timer not available or enabled.\n", __func__); + if (unlikely(!timer)) { + pr_err("%s: timer not available.\n", __func__); return -EINVAL; } + dev = &timer->pdev->dev; + + pm_runtime_resume_and_get(dev); dmtimer_write(timer, OMAP_TIMER_COUNTER_REG, value); + pm_runtime_put_sync(dev); /* Save the context */ timer->context.tcrr = value; return 0; } +/** + * omap_dm_timer_cap_counter() - Calculate the high count or period count depending on the + * configuration. + * @cookie:Pointer to OMAP DM timer + * @is_period:Whether to configure timer in period or duty cycle mode + * + * Return high count or period count if timer is enabled else appropriate error. + */ +static unsigned int omap_dm_timer_cap_counter(struct omap_dm_timer *cookie, bool is_period) +{ + struct dmtimer *timer; + unsigned int cap1 = 0; + unsigned int cap2 = 0; + u32 l, ret; + + timer = to_dmtimer(cookie); + if (unlikely(!timer || !atomic_read(&timer->enabled))) { + pr_err("%s:timer is not available or enabled.%p\n", __func__, (void *)timer); + return -EINVAL; + } + + /* Stop the timer */ + omap_dm_timer_stop(cookie); + + /* Clear the timer counter value to 0 */ + ret = omap_dm_timer_write_counter(cookie, 0); + if (ret) + return ret; + + /* Sets the timer capture configuration for period/duty cycle calculation */ + ret = omap_dm_timer_set_cap(cookie, true, is_period); + if (ret) { + pr_err("%s: Failed to set timer capture configuration.\n", __func__); + return ret; + } + /* Start the timer */ + omap_dm_timer_start(cookie); + + /* + * 1 sec delay is given so as to provide + * enough time to capture low frequency signals. + */ + msleep(1000); + + cap1 = __omap_dm_timer_cap(timer, 0); + cap2 = __omap_dm_timer_cap(timer, 1); + + /* + * Clears the TCLR configuration. + * The start bit must be set to 1 as the timer is already in start mode. + */ + l = dmtimer_read(timer, OMAP_TIMER_CTRL_REG); + l &= ~(0xffff) | 0x1; + dmtimer_write(timer, OMAP_TIMER_CTRL_REG, l); + + return (cap2-cap1); +} + static int __maybe_unused omap_dm_timer_runtime_suspend(struct device *dev) { struct dmtimer *timer = dev_get_drvdata(dev); @@ -1246,6 +1358,9 @@ static const struct omap_dm_timer_ops dmtimer_ops = { .write_counter = omap_dm_timer_write_counter, .read_status = omap_dm_timer_read_status, .write_status = omap_dm_timer_write_status, + .set_cap = omap_dm_timer_set_cap, + .get_cap_status = omap_dm_timer_get_pwm_status, + .read_cap = omap_dm_timer_cap_counter, }; static const struct dmtimer_platform_data omap3plus_pdata = { |