diff options
Diffstat (limited to 'drivers/gpu/drm/i915/i915_driver.c')
| -rw-r--r-- | drivers/gpu/drm/i915/i915_driver.c | 155 |
1 files changed, 87 insertions, 68 deletions
diff --git a/drivers/gpu/drm/i915/i915_driver.c b/drivers/gpu/drm/i915/i915_driver.c index a28c3710c4d5..c97b76771917 100644 --- a/drivers/gpu/drm/i915/i915_driver.c +++ b/drivers/gpu/drm/i915/i915_driver.c @@ -46,6 +46,8 @@ #include <drm/drm_ioctl.h> #include <drm/drm_managed.h> #include <drm/drm_probe_helper.h> +#include <drm/intel/display_member.h> +#include <drm/intel/display_parent_interface.h> #include "display/i9xx_display_sr.h" #include "display/intel_bw.h" @@ -737,6 +739,18 @@ static void i915_welcome_messages(struct drm_i915_private *dev_priv) "DRM_I915_DEBUG_RUNTIME_PM enabled\n"); } +static const struct intel_display_parent_interface parent = { + .rpm = &i915_display_rpm_interface, +}; + +const struct intel_display_parent_interface *i915_driver_parent_interface(void) +{ + return &parent; +} + +/* Ensure drm and display members are placed properly. */ +INTEL_DISPLAY_MEMBER_STATIC_ASSERT(struct drm_i915_private, drm, display); + static struct drm_i915_private * i915_driver_create(struct pci_dev *pdev, const struct pci_device_id *ent) { @@ -758,7 +772,7 @@ i915_driver_create(struct pci_dev *pdev, const struct pci_device_id *ent) /* Set up device info and initial runtime info. */ intel_device_info_driver_create(i915, pdev->device, match_info); - display = intel_display_device_probe(pdev); + display = intel_display_device_probe(pdev, &parent); if (IS_ERR(display)) return ERR_CAST(display); @@ -978,7 +992,7 @@ void i915_driver_shutdown(struct drm_i915_private *i915) intel_runtime_pm_disable(&i915->runtime_pm); intel_power_domains_disable(display); - drm_client_dev_suspend(&i915->drm, false); + drm_client_dev_suspend(&i915->drm); if (intel_display_device_present(display)) { drm_kms_helper_poll_disable(&i915->drm); intel_display_driver_disable_user_access(display); @@ -1053,7 +1067,6 @@ static int i915_drm_suspend(struct drm_device *dev) { struct drm_i915_private *dev_priv = to_i915(dev); struct intel_display *display = dev_priv->display; - struct pci_dev *pdev = to_pci_dev(dev_priv->drm.dev); pci_power_t opregion_target_state; disable_rpm_wakeref_asserts(&dev_priv->runtime_pm); @@ -1061,14 +1074,12 @@ static int i915_drm_suspend(struct drm_device *dev) /* We do a lot of poking in a lot of registers, make sure they work * properly. */ intel_power_domains_disable(display); - drm_client_dev_suspend(dev, false); + drm_client_dev_suspend(dev); if (intel_display_device_present(display)) { drm_kms_helper_poll_disable(dev); intel_display_driver_disable_user_access(display); } - pci_save_state(pdev); - intel_display_driver_suspend(display); intel_irq_suspend(dev_priv); @@ -1103,7 +1114,6 @@ static int i915_drm_suspend_late(struct drm_device *dev, bool hibernation) { struct drm_i915_private *dev_priv = to_i915(dev); struct intel_display *display = dev_priv->display; - struct pci_dev *pdev = to_pci_dev(dev_priv->drm.dev); struct intel_runtime_pm *rpm = &dev_priv->runtime_pm; struct intel_gt *gt; int ret, i; @@ -1124,11 +1134,21 @@ static int i915_drm_suspend_late(struct drm_device *dev, bool hibernation) if (ret) { drm_err(&dev_priv->drm, "Suspend complete failed: %d\n", ret); intel_display_power_resume_early(display); - - goto out; } - pci_disable_device(pdev); + enable_rpm_wakeref_asserts(rpm); + + if (!dev_priv->uncore.user_forcewake_count) + intel_runtime_pm_driver_release(rpm); + + return ret; +} + +static int i915_drm_suspend_noirq(struct drm_device *dev, bool hibernation) +{ + struct drm_i915_private *dev_priv = to_i915(dev); + struct pci_dev *pdev = to_pci_dev(dev_priv->drm.dev); + /* * During hibernation on some platforms the BIOS may try to access * the device even though it's already in D3 and hang the machine. So @@ -1140,21 +1160,20 @@ static int i915_drm_suspend_late(struct drm_device *dev, bool hibernation) * Lenovo Thinkpad X301, X61s, X60, T60, X41 * Fujitsu FSC S7110 * Acer Aspire 1830T + * + * pci_save_state() prevents drivers/pci from + * automagically putting the device into D3. */ - if (!(hibernation && GRAPHICS_VER(dev_priv) < 6)) - pci_set_power_state(pdev, PCI_D3hot); - -out: - enable_rpm_wakeref_asserts(rpm); - if (!dev_priv->uncore.user_forcewake_count) - intel_runtime_pm_driver_release(rpm); + if (hibernation && GRAPHICS_VER(dev_priv) < 6) + pci_save_state(pdev); - return ret; + return 0; } int i915_driver_suspend_switcheroo(struct drm_i915_private *i915, pm_message_t state) { + struct pci_dev *pdev = to_pci_dev(i915->drm.dev); int error; if (drm_WARN_ON_ONCE(&i915->drm, state.event != PM_EVENT_SUSPEND && @@ -1168,7 +1187,14 @@ int i915_driver_suspend_switcheroo(struct drm_i915_private *i915, if (error) return error; - return i915_drm_suspend_late(&i915->drm, false); + error = i915_drm_suspend_late(&i915->drm, false); + if (error) + return error; + + pci_save_state(pdev); + pci_set_power_state(pdev, PCI_D3hot); + + return 0; } static int i915_drm_resume(struct drm_device *dev) @@ -1245,7 +1271,7 @@ static int i915_drm_resume(struct drm_device *dev) intel_opregion_resume(display); - drm_client_dev_resume(dev, false); + drm_client_dev_resume(dev); intel_power_domains_enable(display); @@ -1260,7 +1286,6 @@ static int i915_drm_resume_early(struct drm_device *dev) { struct drm_i915_private *dev_priv = to_i915(dev); struct intel_display *display = dev_priv->display; - struct pci_dev *pdev = to_pci_dev(dev_priv->drm.dev); struct intel_gt *gt; int ret, i; @@ -1274,41 +1299,6 @@ static int i915_drm_resume_early(struct drm_device *dev) * similar so that power domains can be employed. */ - /* - * Note that we need to set the power state explicitly, since we - * powered off the device during freeze and the PCI core won't power - * it back up for us during thaw. Powering off the device during - * freeze is not a hard requirement though, and during the - * suspend/resume phases the PCI core makes sure we get here with the - * device powered on. So in case we change our freeze logic and keep - * the device powered we can also remove the following set power state - * call. - */ - ret = pci_set_power_state(pdev, PCI_D0); - if (ret) { - drm_err(&dev_priv->drm, - "failed to set PCI D0 power state (%d)\n", ret); - return ret; - } - - /* - * Note that pci_enable_device() first enables any parent bridge - * device and only then sets the power state for this device. The - * bridge enabling is a nop though, since bridge devices are resumed - * first. The order of enabling power and enabling the device is - * imposed by the PCI core as described above, so here we preserve the - * same order for the freeze/thaw phases. - * - * TODO: eventually we should remove pci_disable_device() / - * pci_enable_enable_device() from suspend/resume. Due to how they - * depend on the device enable refcount we can't anyway depend on them - * disabling/enabling the device. - */ - if (pci_enable_device(pdev)) - return -EIO; - - pci_set_master(pdev); - disable_rpm_wakeref_asserts(&dev_priv->runtime_pm); ret = vlv_resume_prepare(dev_priv, false); @@ -1328,11 +1318,18 @@ static int i915_drm_resume_early(struct drm_device *dev) int i915_driver_resume_switcheroo(struct drm_i915_private *i915) { + struct pci_dev *pdev = to_pci_dev(i915->drm.dev); int ret; if (i915->drm.switch_power_state == DRM_SWITCH_POWER_OFF) return 0; + ret = pci_set_power_state(pdev, PCI_D0); + if (ret) + return ret; + + pci_restore_state(pdev); + ret = i915_drm_resume_early(&i915->drm); if (ret) return ret; @@ -1389,6 +1386,16 @@ static int i915_pm_suspend_late(struct device *kdev) return i915_drm_suspend_late(&i915->drm, false); } +static int i915_pm_suspend_noirq(struct device *kdev) +{ + struct drm_i915_private *i915 = kdev_to_i915(kdev); + + if (i915->drm.switch_power_state == DRM_SWITCH_POWER_OFF) + return 0; + + return i915_drm_suspend_noirq(&i915->drm, false); +} + static int i915_pm_poweroff_late(struct device *kdev) { struct drm_i915_private *i915 = kdev_to_i915(kdev); @@ -1399,6 +1406,16 @@ static int i915_pm_poweroff_late(struct device *kdev) return i915_drm_suspend_late(&i915->drm, true); } +static int i915_pm_poweroff_noirq(struct device *kdev) +{ + struct drm_i915_private *i915 = kdev_to_i915(kdev); + + if (i915->drm.switch_power_state == DRM_SWITCH_POWER_OFF) + return 0; + + return i915_drm_suspend_noirq(&i915->drm, true); +} + static int i915_pm_resume_early(struct device *kdev) { struct drm_i915_private *i915 = kdev_to_i915(kdev); @@ -1664,24 +1681,25 @@ const struct dev_pm_ops i915_pm_ops = { .prepare = i915_pm_prepare, .suspend = i915_pm_suspend, .suspend_late = i915_pm_suspend_late, + .suspend_noirq = i915_pm_suspend_noirq, .resume_early = i915_pm_resume_early, .resume = i915_pm_resume, .complete = i915_pm_complete, /* * S4 event handlers - * @freeze, @freeze_late : called (1) before creating the - * hibernation image [PMSG_FREEZE] and - * (2) after rebooting, before restoring - * the image [PMSG_QUIESCE] - * @thaw, @thaw_early : called (1) after creating the hibernation - * image, before writing it [PMSG_THAW] - * and (2) after failing to create or - * restore the image [PMSG_RECOVER] - * @poweroff, @poweroff_late: called after writing the hibernation - * image, before rebooting [PMSG_HIBERNATE] - * @restore, @restore_early : called after rebooting and restoring the - * hibernation image [PMSG_RESTORE] + * @freeze* : called (1) before creating the + * hibernation image [PMSG_FREEZE] and + * (2) after rebooting, before restoring + * the image [PMSG_QUIESCE] + * @thaw* : called (1) after creating the hibernation + * image, before writing it [PMSG_THAW] + * and (2) after failing to create or + * restore the image [PMSG_RECOVER] + * @poweroff* : called after writing the hibernation + * image, before rebooting [PMSG_HIBERNATE] + * @restore* : called after rebooting and restoring the + * hibernation image [PMSG_RESTORE] */ .freeze = i915_pm_freeze, .freeze_late = i915_pm_freeze_late, @@ -1689,6 +1707,7 @@ const struct dev_pm_ops i915_pm_ops = { .thaw = i915_pm_thaw, .poweroff = i915_pm_suspend, .poweroff_late = i915_pm_poweroff_late, + .poweroff_noirq = i915_pm_poweroff_noirq, .restore_early = i915_pm_restore_early, .restore = i915_pm_restore, |