diff options
Diffstat (limited to 'drivers/hwmon/pmbus/mp2925.c')
| -rw-r--r-- | drivers/hwmon/pmbus/mp2925.c | 316 |
1 files changed, 316 insertions, 0 deletions
diff --git a/drivers/hwmon/pmbus/mp2925.c b/drivers/hwmon/pmbus/mp2925.c new file mode 100644 index 000000000000..6bebd6023021 --- /dev/null +++ b/drivers/hwmon/pmbus/mp2925.c @@ -0,0 +1,316 @@ +// SPDX-License-Identifier: GPL-2.0-or-later +/* + * Hardware monitoring driver for MPS Multi-phase Digital VR Controllers(MP2925) + */ + +#include <linux/bitfield.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include "pmbus.h" + +/* + * Vender specific register MFR_VR_MULTI_CONFIG(0x08). + * This register is used to obtain vid scale. + */ +#define MFR_VR_MULTI_CONFIG 0x08 + +#define MP2925_VOUT_DIV 512 +#define MP2925_VOUT_OVUV_UINT 195 +#define MP2925_VOUT_OVUV_DIV 100 + +#define MP2925_PAGE_NUM 2 + +#define MP2925_RAIL1_FUNC (PMBUS_HAVE_VIN | PMBUS_HAVE_PIN | \ + PMBUS_HAVE_VOUT | PMBUS_HAVE_IOUT | \ + PMBUS_HAVE_POUT | PMBUS_HAVE_TEMP | \ + PMBUS_HAVE_STATUS_VOUT | \ + PMBUS_HAVE_STATUS_IOUT | \ + PMBUS_HAVE_STATUS_TEMP | \ + PMBUS_HAVE_STATUS_INPUT) + +#define MP2925_RAIL2_FUNC (PMBUS_HAVE_PIN | PMBUS_HAVE_VOUT | \ + PMBUS_HAVE_IOUT | PMBUS_HAVE_POUT | \ + PMBUS_HAVE_TEMP | PMBUS_HAVE_IIN | \ + PMBUS_HAVE_STATUS_VOUT | \ + PMBUS_HAVE_STATUS_IOUT | \ + PMBUS_HAVE_STATUS_TEMP | \ + PMBUS_HAVE_STATUS_INPUT) + +struct mp2925_data { + struct pmbus_driver_info info; + int vout_scale[MP2925_PAGE_NUM]; +}; + +#define to_mp2925_data(x) container_of(x, struct mp2925_data, info) + +static u16 mp2925_linear_exp_transfer(u16 word, u16 expect_exponent) +{ + s16 exponent, mantissa, target_exponent; + + exponent = ((s16)word) >> 11; + mantissa = ((s16)((word & 0x7ff) << 5)) >> 5; + target_exponent = (s16)((expect_exponent & 0x1f) << 11) >> 11; + + if (exponent > target_exponent) + mantissa = mantissa << (exponent - target_exponent); + else + mantissa = mantissa >> (target_exponent - exponent); + + return (mantissa & 0x7ff) | ((expect_exponent << 11) & 0xf800); +} + +static int mp2925_read_byte_data(struct i2c_client *client, int page, int reg) +{ + int ret; + + switch (reg) { + case PMBUS_VOUT_MODE: + /* + * The MP2925 does not follow standard PMBus protocol completely, + * and the calculation of vout in this driver is based on direct + * format. As a result, the format of vout is enforced to direct. + */ + ret = PB_VOUT_MODE_DIRECT; + break; + default: + ret = -ENODATA; + break; + } + + return ret; +} + +static int mp2925_read_word_data(struct i2c_client *client, int page, int phase, + int reg) +{ + const struct pmbus_driver_info *info = pmbus_get_driver_info(client); + struct mp2925_data *data = to_mp2925_data(info); + int ret; + + switch (reg) { + case PMBUS_READ_VOUT: + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = DIV_ROUND_CLOSEST((ret & GENMASK(11, 0)) * data->vout_scale[page], + MP2925_VOUT_DIV); + break; + case PMBUS_VOUT_OV_FAULT_LIMIT: + case PMBUS_VOUT_UV_FAULT_LIMIT: + ret = pmbus_read_word_data(client, page, phase, reg); + if (ret < 0) + return ret; + + ret = DIV_ROUND_CLOSEST((ret & GENMASK(11, 0)) * MP2925_VOUT_OVUV_UINT, + MP2925_VOUT_OVUV_DIV); + break; + case PMBUS_STATUS_WORD: + case PMBUS_READ_VIN: + case PMBUS_READ_IOUT: + case PMBUS_READ_POUT: + case PMBUS_READ_PIN: + case PMBUS_READ_IIN: + case PMBUS_READ_TEMPERATURE_1: + case PMBUS_VIN_OV_FAULT_LIMIT: + case PMBUS_VIN_OV_WARN_LIMIT: + case PMBUS_VIN_UV_WARN_LIMIT: + case PMBUS_VIN_UV_FAULT_LIMIT: + case PMBUS_IOUT_OC_FAULT_LIMIT: + case PMBUS_IOUT_OC_WARN_LIMIT: + case PMBUS_OT_FAULT_LIMIT: + case PMBUS_OT_WARN_LIMIT: + ret = -ENODATA; + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static int mp2925_write_word_data(struct i2c_client *client, int page, int reg, + u16 word) +{ + int ret; + + switch (reg) { + case PMBUS_VIN_OV_FAULT_LIMIT: + case PMBUS_VIN_OV_WARN_LIMIT: + case PMBUS_VIN_UV_WARN_LIMIT: + case PMBUS_VIN_UV_FAULT_LIMIT: + /* + * The PMBUS_VIN_OV_FAULT_LIMIT, PMBUS_VIN_OV_WARN_LIMIT, + * PMBUS_VIN_UV_WARN_LIMIT and PMBUS_VIN_UV_FAULT_LIMIT + * of MP2925 is linear11 format, and the exponent is a + * constant value(5'b11100)， so the exponent of word + * parameter should be converted to 5'b11100(0x1C). + */ + ret = pmbus_write_word_data(client, page, reg, + mp2925_linear_exp_transfer(word, 0x1C)); + break; + case PMBUS_VOUT_OV_FAULT_LIMIT: + case PMBUS_VOUT_UV_FAULT_LIMIT: + /* + * The bit0-bit11 is the limit value, and bit12-bit15 + * should not be changed. + */ + ret = pmbus_read_word_data(client, page, 0xff, reg); + if (ret < 0) + return ret; + + ret = pmbus_write_word_data(client, page, reg, + (ret & ~GENMASK(11, 0)) | + FIELD_PREP(GENMASK(11, 0), + DIV_ROUND_CLOSEST(word * MP2925_VOUT_OVUV_DIV, + MP2925_VOUT_OVUV_UINT))); + break; + case PMBUS_OT_FAULT_LIMIT: + case PMBUS_OT_WARN_LIMIT: + /* + * The PMBUS_OT_FAULT_LIMIT and PMBUS_OT_WARN_LIMIT of + * MP2925 is linear11 format, and the exponent is a + * constant value(5'b00000), so the exponent of word + * parameter should be converted to 5'b00000. + */ + ret = pmbus_write_word_data(client, page, reg, + mp2925_linear_exp_transfer(word, 0x00)); + break; + case PMBUS_IOUT_OC_FAULT_LIMIT: + case PMBUS_IOUT_OC_WARN_LIMIT: + /* + * The PMBUS_IOUT_OC_FAULT_LIMIT and PMBUS_IOUT_OC_WARN_LIMIT + * of MP2925 is linear11 format, and the exponent can not be + * changed. + */ + ret = pmbus_read_word_data(client, page, 0xff, reg); + if (ret < 0) + return ret; + + ret = pmbus_write_word_data(client, page, reg, + mp2925_linear_exp_transfer(word, + FIELD_GET(GENMASK(15, 11), + ret))); + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static int +mp2925_identify_vout_scale(struct i2c_client *client, struct pmbus_driver_info *info, + int page) +{ + struct mp2925_data *data = to_mp2925_data(info); + int ret; + + ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, page); + if (ret < 0) + return ret; + + ret = i2c_smbus_read_byte_data(client, PMBUS_VOUT_MODE); + if (ret < 0) + return ret; + + if (FIELD_GET(GENMASK(5, 5), ret)) { + ret = i2c_smbus_write_byte_data(client, PMBUS_PAGE, + page == 0 ? 3 : 4); + if (ret < 0) + return ret; + + ret = i2c_smbus_read_word_data(client, MFR_VR_MULTI_CONFIG); + if (ret < 0) + return ret; + + if (FIELD_GET(GENMASK(5, 5), ret)) + data->vout_scale[page] = 2560; + else + data->vout_scale[page] = 5120; + } else if (FIELD_GET(GENMASK(4, 4), ret)) { + data->vout_scale[page] = 1; + } else { + data->vout_scale[page] = 512; + } + + return 0; +} + +static int mp2925_identify(struct i2c_client *client, struct pmbus_driver_info *info) +{ + int ret; + + ret = mp2925_identify_vout_scale(client, info, 0); + if (ret < 0) + return ret; + + return mp2925_identify_vout_scale(client, info, 1); +} + +static const struct pmbus_driver_info mp2925_info = { + .pages = MP2925_PAGE_NUM, + .format[PSC_VOLTAGE_IN] = linear, + .format[PSC_CURRENT_IN] = linear, + .format[PSC_CURRENT_OUT] = linear, + .format[PSC_POWER] = linear, + .format[PSC_TEMPERATURE] = linear, + .format[PSC_VOLTAGE_OUT] = direct, + + .m[PSC_VOLTAGE_OUT] = 1, + .R[PSC_VOLTAGE_OUT] = 3, + .b[PSC_VOLTAGE_OUT] = 0, + + .func[0] = MP2925_RAIL1_FUNC, + .func[1] = MP2925_RAIL2_FUNC, + .read_word_data = mp2925_read_word_data, + .read_byte_data = mp2925_read_byte_data, + .write_word_data = mp2925_write_word_data, + .identify = mp2925_identify, +}; + +static int mp2925_probe(struct i2c_client *client) +{ + struct mp2925_data *data; + + data = devm_kzalloc(&client->dev, sizeof(struct mp2925_data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + memcpy(&data->info, &mp2925_info, sizeof(mp2925_info)); + + return pmbus_do_probe(client, &data->info); +} + +static const struct i2c_device_id mp2925_id[] = { + {"mp2925"}, + {"mp2929"}, + {} +}; +MODULE_DEVICE_TABLE(i2c, mp2925_id); + +static const struct of_device_id __maybe_unused mp2925_of_match[] = { + {.compatible = "mps,mp2925"}, + {.compatible = "mps,mp2929"}, + {} +}; +MODULE_DEVICE_TABLE(of, mp2925_of_match); + +static struct i2c_driver mp2925_driver = { + .driver = { + .name = "mp2925", + .of_match_table = mp2925_of_match, + }, + .probe = mp2925_probe, + .id_table = mp2925_id, +}; + +module_i2c_driver(mp2925_driver); + +MODULE_AUTHOR("Wensheng Wang <wenswang@yeah.net>"); +MODULE_DESCRIPTION("PMBus driver for MPS MP2925"); +MODULE_LICENSE("GPL"); +MODULE_IMPORT_NS("PMBUS"); |