diff options
Diffstat (limited to 'drivers/net/wireless/intel/iwlwifi/fw/file.h')
| -rw-r--r-- | drivers/net/wireless/intel/iwlwifi/fw/file.h | 74 |
1 files changed, 55 insertions, 19 deletions
diff --git a/drivers/net/wireless/intel/iwlwifi/fw/file.h b/drivers/net/wireless/intel/iwlwifi/fw/file.h index b7c1ab7a3006..b9e0b69c6680 100644 --- a/drivers/net/wireless/intel/iwlwifi/fw/file.h +++ b/drivers/net/wireless/intel/iwlwifi/fw/file.h @@ -222,7 +222,10 @@ typedef unsigned int __bitwise iwl_ucode_tlv_api_t; * @IWL_UCODE_TLV_API_STA_TYPE: This ucode supports station type assignement. * @IWL_UCODE_TLV_API_NAN2_VER2: This ucode supports NAN API version 2 * @IWL_UCODE_TLV_API_ADAPTIVE_DWELL: support for adaptive dwell in scanning + * @IWL_UCODE_TLV_API_OCE: support for OCE + * @IWL_UCODE_TLV_API_NEW_BEACON_TEMPLATE: new beacon template * @IWL_UCODE_TLV_API_NEW_RX_STATS: should new RX STATISTICS API be used + * @IWL_UCODE_TLV_API_WOWLAN_KEY_MATERIAL: WoWLAN key material support * @IWL_UCODE_TLV_API_QUOTA_LOW_LATENCY: Quota command includes a field * indicating low latency direction. * @IWL_UCODE_TLV_API_DEPRECATE_TTAK: RX status flag TTAK ok (bit 7) is @@ -245,6 +248,7 @@ typedef unsigned int __bitwise iwl_ucode_tlv_api_t; * SCAN_OFFLOAD_PROFILES_QUERY_RSP_S. * @IWL_UCODE_TLV_API_MBSSID_HE: This ucode supports v2 of * STA_CONTEXT_DOT11AX_API_S + * @IWL_UCODE_TLV_API_WOWLAN_TCP_SYN_WAKE: WoWLAN TCP-SYN wake support * @IWL_UCODE_TLV_API_FTM_RTT_ACCURACY: version 7 of the range response API * is supported by FW, this indicates the RTT confidence value * @IWL_UCODE_TLV_API_SAR_TABLE_VER: This ucode supports different sar @@ -253,6 +257,7 @@ typedef unsigned int __bitwise iwl_ucode_tlv_api_t; * SCAN_CONFIG_DB_CMD_API_S. * @IWL_UCODE_TLV_API_ADWELL_HB_DEF_N_AP: support for setting adaptive dwell * number of APs in the 5 GHz band + * @IWL_UCODE_TLV_API_SCAN_EXT_CHAN_VER: extended channel config in scan * @IWL_UCODE_TLV_API_BAND_IN_RX_DATA: FW reports band number in RX notification * @IWL_UCODE_TLV_API_NO_HOST_DISABLE_TX: Firmware offloaded the station disable tx * logic. @@ -352,16 +357,24 @@ typedef unsigned int __bitwise iwl_ucode_tlv_capa_t; * @IWL_UCODE_TLV_CAPA_SOC_LATENCY_SUPPORT: the firmware supports setting * stabilization latency for SoCs. * @IWL_UCODE_TLV_CAPA_STA_PM_NOTIF: firmware will send STA PM notification + * @IWL_UCODE_TLV_CAPA_BINDING_CDB_SUPPORT: binding CDB support + * @IWL_UCODE_TLV_CAPA_CDB_SUPPORT: CDB support + * @IWL_UCODE_TLV_CAPA_D0I3_END_FIRST: D0I3 end command comes first * @IWL_UCODE_TLV_CAPA_TLC_OFFLOAD: firmware implements rate scaling algorithm * @IWL_UCODE_TLV_CAPA_DYNAMIC_QUOTA: firmware implements quota related * @IWL_UCODE_TLV_CAPA_COEX_SCHEMA_2: firmware implements Coex Schema 2 - * IWL_UCODE_TLV_CAPA_CHANNEL_SWITCH_CMD: firmware supports CSA command + * @IWL_UCODE_TLV_CAPA_CHANNEL_SWITCH_CMD: firmware supports CSA command * @IWL_UCODE_TLV_CAPA_ULTRA_HB_CHANNELS: firmware supports ultra high band * (6 GHz). * @IWL_UCODE_TLV_CAPA_CS_MODIFY: firmware supports modify action CSA command + * @IWL_UCODE_TLV_CAPA_SET_LTR_GEN2: LTR gen2 support + * @IWL_UCODE_TLV_CAPA_TAS_CFG: TAS configuration support + * @IWL_UCODE_TLV_CAPA_SESSION_PROT_CMD: session protection command + * @IWL_UCODE_TLV_CAPA_SET_PPAG: PPAG support * @IWL_UCODE_TLV_CAPA_EXTENDED_DTS_MEASURE: extended DTS measurement * @IWL_UCODE_TLV_CAPA_SHORT_PM_TIMEOUTS: supports short PM timeouts * @IWL_UCODE_TLV_CAPA_BT_MPLUT_SUPPORT: supports bt-coex Multi-priority LUT + * @IWL_UCODE_TLV_CAPA_MULTI_QUEUE_RX_SUPPORT: MQ RX support * @IWL_UCODE_TLV_CAPA_CSA_AND_TBTT_OFFLOAD: the firmware supports CSA * countdown offloading. Beacon notifications are not sent to the host. * The fw also offloads TBTT alignment. @@ -383,23 +396,46 @@ typedef unsigned int __bitwise iwl_ucode_tlv_capa_t; * command size (command version 4) that supports toggling ACK TX * power reduction. * @IWL_UCODE_TLV_CAPA_D3_DEBUG: supports debug recording during D3 + * @IWL_UCODE_TLV_CAPA_LED_CMD_SUPPORT: LED command support * @IWL_UCODE_TLV_CAPA_MCC_UPDATE_11AX_SUPPORT: MCC response support 11ax * capability. * @IWL_UCODE_TLV_CAPA_CSI_REPORTING: firmware is capable of being configured * to report the CSI information with (certain) RX frames + * @IWL_UCODE_TLV_CAPA_DBG_SUSPEND_RESUME_CMD_SUPP: suspend/resume command + * @IWL_UCODE_TLV_CAPA_DBG_BUF_ALLOC_CMD_SUPP: support for DBGC + * buffer allocation command * @IWL_UCODE_TLV_CAPA_FTM_CALIBRATED: has FTM calibrated and thus supports both * initiator and responder * @IWL_UCODE_TLV_CAPA_BIOS_OVERRIDE_UNII4_US_CA: supports (de)activating UNII-4 * for US/CA/WW from BIOS + * @IWL_UCODE_TLV_CAPA_PSC_CHAN_SUPPORT: supports PSC channels + * @IWL_UCODE_TLV_CAPA_BIGTK_SUPPORT: BIGTK support * @IWL_UCODE_TLV_CAPA_PROTECTED_TWT: Supports protection of TWT action frames * @IWL_UCODE_TLV_CAPA_FW_RESET_HANDSHAKE: Supports the firmware handshake in * reset flow * @IWL_UCODE_TLV_CAPA_PASSIVE_6GHZ_SCAN: Support for passive scan on 6GHz PSC * channels even when these are not enabled. + * @IWL_UCODE_TLV_CAPA_HIDDEN_6GHZ_SCAN: hidden SSID 6 GHz scan support + * @IWL_UCODE_TLV_CAPA_BROADCAST_TWT: broadcast TWT support + * @IWL_UCODE_TLV_CAPA_COEX_HIGH_PRIO: support for BT-coex high + * priority for 802.1X/4-way-HS + * @IWL_UCODE_TLV_CAPA_BAID_ML_SUPPORT: multi-link BAID support + * @IWL_UCODE_TLV_CAPA_SYNCED_TIME: synced time command support + * @IWL_UCODE_TLV_CAPA_TIME_SYNC_BOTH_FTM_TM: time sync support + * @IWL_UCODE_TLV_CAPA_BIGTK_TX_SUPPORT: BIGTK TX support + * @IWL_UCODE_TLV_CAPA_MLD_API_SUPPORT: MLD API support + * @IWL_UCODE_TLV_CAPA_SCAN_DONT_TOGGLE_ANT: fixed antenna scan support + * @IWL_UCODE_TLV_CAPA_PPAG_CHINA_BIOS_SUPPORT: PPAG China BIOS support + * @IWL_UCODE_TLV_CAPA_OFFLOAD_BTM_SUPPORT: BTM protocol offload support + * @IWL_UCODE_TLV_CAPA_STA_EXP_MFP_SUPPORT: STA command MFP support + * @IWL_UCODE_TLV_CAPA_SNIFF_VALIDATE_SUPPORT: sniffer validate bits support + * @IWL_UCODE_TLV_CAPA_CHINA_22_REG_SUPPORT: China 2022 regulator support * @IWL_UCODE_TLV_CAPA_DUMP_COMPLETE_SUPPORT: Support for indicating dump collection * complete to FW. * @IWL_UCODE_TLV_CAPA_SPP_AMSDU_SUPPORT: Support SPP (signaling and payload * protected) A-MSDU. + * @IWL_UCODE_TLV_CAPA_DRAM_FRAG_SUPPORT: support for DBGC fragmented + * DRAM buffers * @IWL_UCODE_TLV_CAPA_SECURE_LTF_SUPPORT: Support secure LTF measurement. * @IWL_UCODE_TLV_CAPA_MONITOR_PASSIVE_CHANS: Support monitor mode on otherwise * passive channels @@ -407,6 +443,8 @@ typedef unsigned int __bitwise iwl_ucode_tlv_capa_t; * for CA from BIOS. * @IWL_UCODE_TLV_CAPA_UHB_CANADA_TAS_SUPPORT: supports %TAS_UHB_ALLOWED_CANADA * @IWL_UCODE_TLV_CAPA_EXT_FSEQ_IMAGE_SUPPORT: external FSEQ image support + * @IWL_UCODE_TLV_CAPA_RESET_DURING_ASSERT: FW reset handshake is needed + * during assert handling even if the dump isn't split * @IWL_UCODE_TLV_CAPA_FW_ACCEPTS_RAW_DSM_TABLE: Firmware has capability of * handling raw DSM table data. * @@ -487,12 +525,7 @@ enum iwl_ucode_tlv_capa { /* set 3 */ IWL_UCODE_TLV_CAPA_BIOS_OVERRIDE_UNII4_US_CA = (__force iwl_ucode_tlv_capa_t)96, - - /* - * @IWL_UCODE_TLV_CAPA_PSC_CHAN_SUPPORT: supports PSC channels - */ IWL_UCODE_TLV_CAPA_PSC_CHAN_SUPPORT = (__force iwl_ucode_tlv_capa_t)98, - IWL_UCODE_TLV_CAPA_BIGTK_SUPPORT = (__force iwl_ucode_tlv_capa_t)100, IWL_UCODE_TLV_CAPA_SPP_AMSDU_SUPPORT = (__force iwl_ucode_tlv_capa_t)103, IWL_UCODE_TLV_CAPA_DRAM_FRAG_SUPPORT = (__force iwl_ucode_tlv_capa_t)104, @@ -514,11 +547,8 @@ enum iwl_ucode_tlv_capa { IWL_UCODE_TLV_CAPA_EXT_FSEQ_IMAGE_SUPPORT = (__force iwl_ucode_tlv_capa_t)125, /* set 4 */ - /** - * @IWL_UCODE_TLV_CAPA_RESET_DURING_ASSERT: FW reset handshake is needed - * during assert handling even if the dump isn't split - */ - IWL_UCODE_TLV_CAPA_RESET_DURING_ASSERT = (__force iwl_ucode_tlv_capa_t)(4 * 32 + 0), + + IWL_UCODE_TLV_CAPA_RESET_DURING_ASSERT = (__force iwl_ucode_tlv_capa_t)(4 * 32 + 0), IWL_UCODE_TLV_CAPA_FW_ACCEPTS_RAW_DSM_TABLE = (__force iwl_ucode_tlv_capa_t)(4 * 32 + 1), NUM_IWL_UCODE_TLV_CAPA /* @@ -852,6 +882,8 @@ struct iwl_fw_dbg_trigger_low_rssi { * @start_assoc_denied: number of denied association to start recording * @start_assoc_timeout: number of association timeout to start recording * @start_connection_loss: number of connection loss to start recording + * @reserved: reserved + * @reserved2: reserved */ struct iwl_fw_dbg_trigger_mlme { u8 stop_auth_denied; @@ -885,6 +917,7 @@ struct iwl_fw_dbg_trigger_mlme { * @p2p_device: timeout for the queues of a P2P device in ms * @ibss: timeout for the queues of an IBSS in ms * @tdls: timeout for the queues of a TDLS station in ms + * @reserved: reserved */ struct iwl_fw_dbg_trigger_txq_timer { __le32 command_queue; @@ -900,7 +933,7 @@ struct iwl_fw_dbg_trigger_txq_timer { /** * struct iwl_fw_dbg_trigger_time_event - configures a time event trigger - * time_Events: a list of tuples <id, action_bitmap>. The driver will issue a + * @time_events: a list of tuples <id, action_bitmap>. The driver will issue a * trigger each time a time event notification that relates to time event * id with one of the actions in the bitmap is received and * BIT(notif->status) is set in status_bitmap. @@ -916,19 +949,19 @@ struct iwl_fw_dbg_trigger_time_event { /** * struct iwl_fw_dbg_trigger_ba - configures BlockAck related trigger - * rx_ba_start: tid bitmap to configure on what tid the trigger should occur + * @rx_ba_start: tid bitmap to configure on what tid the trigger should occur * when an Rx BlockAck session is started. - * rx_ba_stop: tid bitmap to configure on what tid the trigger should occur + * @rx_ba_stop: tid bitmap to configure on what tid the trigger should occur * when an Rx BlockAck session is stopped. - * tx_ba_start: tid bitmap to configure on what tid the trigger should occur + * @tx_ba_start: tid bitmap to configure on what tid the trigger should occur * when a Tx BlockAck session is started. - * tx_ba_stop: tid bitmap to configure on what tid the trigger should occur + * @tx_ba_stop: tid bitmap to configure on what tid the trigger should occur * when a Tx BlockAck session is stopped. - * rx_bar: tid bitmap to configure on what tid the trigger should occur + * @rx_bar: tid bitmap to configure on what tid the trigger should occur * when a BAR is received (for a Tx BlockAck session). - * tx_bar: tid bitmap to configure on what tid the trigger should occur + * @tx_bar: tid bitmap to configure on what tid the trigger should occur * when a BAR is send (for an Rx BlocAck session). - * frame_timeout: tid bitmap to configure on what tid the trigger should occur + * @frame_timeout: tid bitmap to configure on what tid the trigger should occur * when a frame times out in the reordering buffer. */ struct iwl_fw_dbg_trigger_ba { @@ -946,6 +979,7 @@ struct iwl_fw_dbg_trigger_ba { * @action_bitmap: the TDLS action to trigger the collection upon * @peer_mode: trigger on specific peer or all * @peer: the TDLS peer to trigger the collection on + * @reserved: reserved */ struct iwl_fw_dbg_trigger_tdls { u8 action_bitmap; @@ -958,6 +992,7 @@ struct iwl_fw_dbg_trigger_tdls { * struct iwl_fw_dbg_trigger_tx_status - configures trigger for tx response * status. * @statuses: the list of statuses to trigger the collection on + * @reserved: reserved */ struct iwl_fw_dbg_trigger_tx_status { struct tx_status { @@ -971,6 +1006,7 @@ struct iwl_fw_dbg_trigger_tx_status { * struct iwl_fw_dbg_conf_tlv - a TLV that describes a debug configuration. * @id: conf id * @usniffer: should the uSniffer image be used + * @reserved: reserved * @num_of_hcmds: how many HCMDs to send are present here * @hcmd: a variable length host command to be sent to apply the configuration. * If there is more than one HCMD to send, they will appear one after the |