diff options
Diffstat (limited to 'drivers/pci/controller/dwc/pcie-qcom.c')
| -rw-r--r-- | drivers/pci/controller/dwc/pcie-qcom.c | 68 |
1 files changed, 0 insertions, 68 deletions
diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c index 805edbbfe7eb..6948824642dc 100644 --- a/drivers/pci/controller/dwc/pcie-qcom.c +++ b/drivers/pci/controller/dwc/pcie-qcom.c @@ -55,7 +55,6 @@ #define PARF_AXI_MSTR_WR_ADDR_HALT_V2 0x1a8 #define PARF_Q2A_FLUSH 0x1ac #define PARF_LTSSM 0x1b0 -#define PARF_SLV_DBI_ELBI 0x1b4 #define PARF_INT_ALL_STATUS 0x224 #define PARF_INT_ALL_CLEAR 0x228 #define PARF_INT_ALL_MASK 0x22c @@ -65,16 +64,6 @@ #define PARF_DBI_BASE_ADDR_V2_HI 0x354 #define PARF_SLV_ADDR_SPACE_SIZE_V2 0x358 #define PARF_SLV_ADDR_SPACE_SIZE_V2_HI 0x35c -#define PARF_BLOCK_SLV_AXI_WR_BASE 0x360 -#define PARF_BLOCK_SLV_AXI_WR_BASE_HI 0x364 -#define PARF_BLOCK_SLV_AXI_WR_LIMIT 0x368 -#define PARF_BLOCK_SLV_AXI_WR_LIMIT_HI 0x36c -#define PARF_BLOCK_SLV_AXI_RD_BASE 0x370 -#define PARF_BLOCK_SLV_AXI_RD_BASE_HI 0x374 -#define PARF_BLOCK_SLV_AXI_RD_LIMIT 0x378 -#define PARF_BLOCK_SLV_AXI_RD_LIMIT_HI 0x37c -#define PARF_ECAM_BASE 0x380 -#define PARF_ECAM_BASE_HI 0x384 #define PARF_NO_SNOOP_OVERRIDE 0x3d4 #define PARF_ATU_BASE_ADDR 0x634 #define PARF_ATU_BASE_ADDR_HI 0x638 @@ -98,7 +87,6 @@ /* PARF_SYS_CTRL register fields */ #define MAC_PHY_POWERDOWN_IN_P2_D_MUX_EN BIT(29) -#define PCIE_ECAM_BLOCKER_EN BIT(26) #define MST_WAKEUP_EN BIT(13) #define SLV_WAKEUP_EN BIT(12) #define MSTR_ACLK_CGC_DIS BIT(10) @@ -146,9 +134,6 @@ /* PARF_LTSSM register fields */ #define LTSSM_EN BIT(8) -/* PARF_SLV_DBI_ELBI */ -#define SLV_DBI_ELBI_ADDR_BASE GENMASK(11, 0) - /* PARF_INT_ALL_{STATUS/CLEAR/MASK} register fields */ #define PARF_INT_ALL_LINK_UP BIT(13) #define PARF_INT_MSI_DEV_0_7 GENMASK(30, 23) @@ -326,47 +311,6 @@ static void qcom_ep_reset_deassert(struct qcom_pcie *pcie) qcom_perst_assert(pcie, false); } -static void qcom_pci_config_ecam(struct dw_pcie_rp *pp) -{ - struct dw_pcie *pci = to_dw_pcie_from_pp(pp); - struct qcom_pcie *pcie = to_qcom_pcie(pci); - u64 addr, addr_end; - u32 val; - - writel_relaxed(lower_32_bits(pci->dbi_phys_addr), pcie->parf + PARF_ECAM_BASE); - writel_relaxed(upper_32_bits(pci->dbi_phys_addr), pcie->parf + PARF_ECAM_BASE_HI); - - /* - * The only device on the root bus is a single Root Port. If we try to - * access any devices other than Device/Function 00.0 on Bus 0, the TLP - * will go outside of the controller to the PCI bus. But with CFG Shift - * Feature (ECAM) enabled in iATU, there is no guarantee that the - * response is going to be all F's. Hence, to make sure that the - * requester gets all F's response for accesses other than the Root - * Port, configure iATU to block the transactions starting from - * function 1 of the root bus to the end of the root bus (i.e., from - * dbi_base + 4KB to dbi_base + 1MB). - */ - addr = pci->dbi_phys_addr + SZ_4K; - writel_relaxed(lower_32_bits(addr), pcie->parf + PARF_BLOCK_SLV_AXI_WR_BASE); - writel_relaxed(upper_32_bits(addr), pcie->parf + PARF_BLOCK_SLV_AXI_WR_BASE_HI); - - writel_relaxed(lower_32_bits(addr), pcie->parf + PARF_BLOCK_SLV_AXI_RD_BASE); - writel_relaxed(upper_32_bits(addr), pcie->parf + PARF_BLOCK_SLV_AXI_RD_BASE_HI); - - addr_end = pci->dbi_phys_addr + SZ_1M - 1; - - writel_relaxed(lower_32_bits(addr_end), pcie->parf + PARF_BLOCK_SLV_AXI_WR_LIMIT); - writel_relaxed(upper_32_bits(addr_end), pcie->parf + PARF_BLOCK_SLV_AXI_WR_LIMIT_HI); - - writel_relaxed(lower_32_bits(addr_end), pcie->parf + PARF_BLOCK_SLV_AXI_RD_LIMIT); - writel_relaxed(upper_32_bits(addr_end), pcie->parf + PARF_BLOCK_SLV_AXI_RD_LIMIT_HI); - - val = readl_relaxed(pcie->parf + PARF_SYS_CTRL); - val |= PCIE_ECAM_BLOCKER_EN; - writel_relaxed(val, pcie->parf + PARF_SYS_CTRL); -} - static int qcom_pcie_start_link(struct dw_pcie *pci) { struct qcom_pcie *pcie = to_qcom_pcie(pci); @@ -1320,7 +1264,6 @@ static int qcom_pcie_host_init(struct dw_pcie_rp *pp) { struct dw_pcie *pci = to_dw_pcie_from_pp(pp); struct qcom_pcie *pcie = to_qcom_pcie(pci); - u16 offset; int ret; qcom_ep_reset_assert(pcie); @@ -1329,17 +1272,6 @@ static int qcom_pcie_host_init(struct dw_pcie_rp *pp) if (ret) return ret; - if (pp->ecam_enabled) { - /* - * Override ELBI when ECAM is enabled, as when ECAM is enabled, - * ELBI moves under the 'config' space. - */ - offset = FIELD_GET(SLV_DBI_ELBI_ADDR_BASE, readl(pcie->parf + PARF_SLV_DBI_ELBI)); - pci->elbi_base = pci->dbi_base + offset; - - qcom_pci_config_ecam(pp); - } - ret = qcom_pcie_phy_power_on(pcie); if (ret) goto err_deinit; |