diff options
Diffstat (limited to 'drivers/soc/qcom')
| -rw-r--r-- | drivers/soc/qcom/icc-bwmon.c | 3 | ||||
| -rw-r--r-- | drivers/soc/qcom/llcc-qcom.c | 1 | ||||
| -rw-r--r-- | drivers/soc/qcom/mdt_loader.c | 32 | ||||
| -rw-r--r-- | drivers/soc/qcom/qcom-geni-se.c | 506 | ||||
| -rw-r--r-- | drivers/soc/qcom/qcom_pd_mapper.c | 1 | ||||
| -rw-r--r-- | drivers/soc/qcom/ramp_controller.c | 1 | ||||
| -rw-r--r-- | drivers/soc/qcom/rpm_master_stats.c | 2 | ||||
| -rw-r--r-- | drivers/soc/qcom/rpmh-rsc.c | 7 | ||||
| -rw-r--r-- | drivers/soc/qcom/smem.c | 2 |
9 files changed, 511 insertions, 44 deletions
diff --git a/drivers/soc/qcom/icc-bwmon.c b/drivers/soc/qcom/icc-bwmon.c index 3dfa448bf8cf..597f9025e422 100644 --- a/drivers/soc/qcom/icc-bwmon.c +++ b/drivers/soc/qcom/icc-bwmon.c @@ -656,6 +656,9 @@ static irqreturn_t bwmon_intr_thread(int irq, void *dev_id) if (IS_ERR(target_opp) && PTR_ERR(target_opp) == -ERANGE) target_opp = dev_pm_opp_find_bw_floor(bwmon->dev, &bw_kbps, 0); + if (IS_ERR(target_opp)) + return IRQ_HANDLED; + bwmon->target_kbps = bw_kbps; bw_kbps--; diff --git a/drivers/soc/qcom/llcc-qcom.c b/drivers/soc/qcom/llcc-qcom.c index 192edc3f64dc..857ead56b37d 100644 --- a/drivers/soc/qcom/llcc-qcom.c +++ b/drivers/soc/qcom/llcc-qcom.c @@ -4409,7 +4409,6 @@ static struct regmap *qcom_llcc_init_mmio(struct platform_device *pdev, u8 index .reg_bits = 32, .reg_stride = 4, .val_bits = 32, - .fast_io = true, }; base = devm_platform_ioremap_resource(pdev, index); diff --git a/drivers/soc/qcom/mdt_loader.c b/drivers/soc/qcom/mdt_loader.c index 0ca268bdf1f8..a5c80d4fcc36 100644 --- a/drivers/soc/qcom/mdt_loader.c +++ b/drivers/soc/qcom/mdt_loader.c @@ -39,12 +39,14 @@ static bool mdt_header_valid(const struct firmware *fw) if (phend > fw->size) return false; - if (ehdr->e_shentsize != sizeof(struct elf32_shdr)) - return false; + if (ehdr->e_shentsize || ehdr->e_shnum) { + if (ehdr->e_shentsize != sizeof(struct elf32_shdr)) + return false; - shend = size_add(size_mul(sizeof(struct elf32_shdr), ehdr->e_shnum), ehdr->e_shoff); - if (shend > fw->size) - return false; + shend = size_add(size_mul(sizeof(struct elf32_shdr), ehdr->e_shnum), ehdr->e_shoff); + if (shend > fw->size) + return false; + } return true; } @@ -302,7 +304,7 @@ out: } EXPORT_SYMBOL_GPL(qcom_mdt_pas_init); -static bool qcom_mdt_bins_are_split(const struct firmware *fw, const char *fw_name) +static bool qcom_mdt_bins_are_split(const struct firmware *fw) { const struct elf32_phdr *phdrs; const struct elf32_hdr *ehdr; @@ -331,9 +333,9 @@ static bool qcom_mdt_bins_are_split(const struct firmware *fw, const char *fw_na } static int __qcom_mdt_load(struct device *dev, const struct firmware *fw, - const char *fw_name, int pas_id, void *mem_region, + const char *fw_name, void *mem_region, phys_addr_t mem_phys, size_t mem_size, - phys_addr_t *reloc_base, bool pas_init) + phys_addr_t *reloc_base) { const struct elf32_phdr *phdrs; const struct elf32_phdr *phdr; @@ -353,7 +355,7 @@ static int __qcom_mdt_load(struct device *dev, const struct firmware *fw, if (!mdt_header_valid(fw)) return -EINVAL; - is_split = qcom_mdt_bins_are_split(fw, fw_name); + is_split = qcom_mdt_bins_are_split(fw); ehdr = (struct elf32_hdr *)fw->data; phdrs = (struct elf32_phdr *)(fw->data + ehdr->e_phoff); @@ -458,8 +460,8 @@ int qcom_mdt_load(struct device *dev, const struct firmware *fw, if (ret) return ret; - return __qcom_mdt_load(dev, fw, firmware, pas_id, mem_region, mem_phys, - mem_size, reloc_base, true); + return __qcom_mdt_load(dev, fw, firmware, mem_region, mem_phys, + mem_size, reloc_base); } EXPORT_SYMBOL_GPL(qcom_mdt_load); @@ -468,7 +470,6 @@ EXPORT_SYMBOL_GPL(qcom_mdt_load); * @dev: device handle to associate resources with * @fw: firmware object for the mdt file * @firmware: name of the firmware, for construction of segment file names - * @pas_id: PAS identifier * @mem_region: allocated memory region to load firmware into * @mem_phys: physical address of allocated memory region * @mem_size: size of the allocated memory region @@ -477,12 +478,11 @@ EXPORT_SYMBOL_GPL(qcom_mdt_load); * Returns 0 on success, negative errno otherwise. */ int qcom_mdt_load_no_init(struct device *dev, const struct firmware *fw, - const char *firmware, int pas_id, - void *mem_region, phys_addr_t mem_phys, + const char *firmware, void *mem_region, phys_addr_t mem_phys, size_t mem_size, phys_addr_t *reloc_base) { - return __qcom_mdt_load(dev, fw, firmware, pas_id, mem_region, mem_phys, - mem_size, reloc_base, false); + return __qcom_mdt_load(dev, fw, firmware, mem_region, mem_phys, + mem_size, reloc_base); } EXPORT_SYMBOL_GPL(qcom_mdt_load_no_init); diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c index 3c3b796333a6..cd1779b6a91a 100644 --- a/drivers/soc/qcom/qcom-geni-se.c +++ b/drivers/soc/qcom/qcom-geni-se.c @@ -1,11 +1,16 @@ // SPDX-License-Identifier: GPL-2.0 -// Copyright (c) 2017-2018, The Linux Foundation. All rights reserved. +/* + * Copyright (c) 2017-2018, The Linux Foundation. All rights reserved. + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries. + */ /* Disable MMIO tracing to prevent excessive logging of unwanted MMIO traces */ #define __DISABLE_TRACE_MMIO__ #include <linux/acpi.h> +#include <linux/bitfield.h> #include <linux/clk.h> +#include <linux/firmware.h> #include <linux/slab.h> #include <linux/dma-mapping.h> #include <linux/io.h> @@ -110,22 +115,94 @@ struct geni_se_desc { static const char * const icc_path_names[] = {"qup-core", "qup-config", "qup-memory"}; -#define QUP_HW_VER_REG 0x4 +static const char * const protocol_name[] = { "None", "SPI", "UART", "I2C", "I3C", "SPI SLAVE" }; + +/** + * struct se_fw_hdr - Serial Engine firmware configuration header + * + * This structure defines the SE firmware header, which together with the + * firmware payload is stored in individual ELF segments. + * + * @magic: Set to 'SEFW'. + * @version: Structure version number. + * @core_version: QUPV3 hardware version. + * @serial_protocol: Encoded in GENI_FW_REVISION. + * @fw_version: Firmware version, from GENI_FW_REVISION. + * @cfg_version: Configuration version, from GENI_INIT_CFG_REVISION. + * @fw_size_in_items: Number of 32-bit words in GENI_FW_RAM. + * @fw_offset: Byte offset to GENI_FW_RAM array. + * @cfg_size_in_items: Number of GENI_FW_CFG index/value pairs. + * @cfg_idx_offset: Byte offset to GENI_FW_CFG index array. + * @cfg_val_offset: Byte offset to GENI_FW_CFG values array. + */ +struct se_fw_hdr { + __le32 magic; + __le32 version; + __le32 core_version; + __le16 serial_protocol; + __le16 fw_version; + __le16 cfg_version; + __le16 fw_size_in_items; + __le16 fw_offset; + __le16 cfg_size_in_items; + __le16 cfg_idx_offset; + __le16 cfg_val_offset; +}; + +/*Magic numbers*/ +#define SE_MAGIC_NUM 0x57464553 + +#define MAX_GENI_CFG_RAMn_CNT 455 + +#define MI_PBT_NON_PAGED_SEGMENT 0x0 +#define MI_PBT_HASH_SEGMENT 0x2 +#define MI_PBT_NOTUSED_SEGMENT 0x3 +#define MI_PBT_SHARED_SEGMENT 0x4 + +#define MI_PBT_FLAG_PAGE_MODE BIT(20) +#define MI_PBT_FLAG_SEGMENT_TYPE GENMASK(26, 24) +#define MI_PBT_FLAG_ACCESS_TYPE GENMASK(23, 21) + +#define MI_PBT_PAGE_MODE_VALUE(x) FIELD_GET(MI_PBT_FLAG_PAGE_MODE, x) + +#define MI_PBT_SEGMENT_TYPE_VALUE(x) FIELD_GET(MI_PBT_FLAG_SEGMENT_TYPE, x) + +#define MI_PBT_ACCESS_TYPE_VALUE(x) FIELD_GET(MI_PBT_FLAG_ACCESS_TYPE, x) + +#define M_COMMON_GENI_M_IRQ_EN (GENMASK(6, 1) | \ + M_IO_DATA_DEASSERT_EN | \ + M_IO_DATA_ASSERT_EN | M_RX_FIFO_RD_ERR_EN | \ + M_RX_FIFO_WR_ERR_EN | M_TX_FIFO_RD_ERR_EN | \ + M_TX_FIFO_WR_ERR_EN) + +/* Common QUPV3 registers */ +#define QUPV3_HW_VER_REG 0x4 +#define QUPV3_SE_AHB_M_CFG 0x118 +#define QUPV3_COMMON_CFG 0x120 +#define QUPV3_COMMON_CGC_CTRL 0x21c + +/* QUPV3_COMMON_CFG fields */ +#define FAST_SWITCH_TO_HIGH_DISABLE BIT(0) + +/* QUPV3_SE_AHB_M_CFG fields */ +#define AHB_M_CLK_CGC_ON BIT(0) + +/* QUPV3_COMMON_CGC_CTRL fields */ +#define COMMON_CSR_SLV_CLK_CGC_ON BIT(0) /* Common SE registers */ -#define GENI_INIT_CFG_REVISION 0x0 -#define GENI_S_INIT_CFG_REVISION 0x4 -#define GENI_OUTPUT_CTRL 0x24 -#define GENI_CGC_CTRL 0x28 -#define GENI_CLK_CTRL_RO 0x60 -#define GENI_FW_S_REVISION_RO 0x6c +#define SE_GENI_INIT_CFG_REVISION 0x0 +#define SE_GENI_S_INIT_CFG_REVISION 0x4 +#define SE_GENI_CGC_CTRL 0x28 +#define SE_GENI_CLK_CTRL_RO 0x60 +#define SE_GENI_FW_S_REVISION_RO 0x6c +#define SE_GENI_CFG_REG0 0x100 #define SE_GENI_BYTE_GRAN 0x254 #define SE_GENI_TX_PACKING_CFG0 0x260 #define SE_GENI_TX_PACKING_CFG1 0x264 #define SE_GENI_RX_PACKING_CFG0 0x284 #define SE_GENI_RX_PACKING_CFG1 0x288 -#define SE_GENI_M_GP_LENGTH 0x910 -#define SE_GENI_S_GP_LENGTH 0x914 +#define SE_GENI_S_IRQ_ENABLE 0x644 #define SE_DMA_TX_PTR_L 0xc30 #define SE_DMA_TX_PTR_H 0xc34 #define SE_DMA_TX_ATTR 0xc38 @@ -142,12 +219,20 @@ static const char * const icc_path_names[] = {"qup-core", "qup-config", #define SE_DMA_RX_IRQ_EN 0xd48 #define SE_DMA_RX_IRQ_EN_SET 0xd4c #define SE_DMA_RX_IRQ_EN_CLR 0xd50 -#define SE_DMA_RX_LEN_IN 0xd54 #define SE_DMA_RX_MAX_BURST 0xd5c #define SE_DMA_RX_FLUSH 0xd60 #define SE_GSI_EVENT_EN 0xe18 #define SE_IRQ_EN 0xe1c #define SE_DMA_GENERAL_CFG 0xe30 +#define SE_GENI_FW_REVISION 0x1000 +#define SE_GENI_S_FW_REVISION 0x1004 +#define SE_GENI_CFG_RAMN 0x1010 +#define SE_GENI_CLK_CTRL 0x2000 +#define SE_DMA_IF_EN 0x2004 +#define SE_FIFO_IF_DISABLE 0x2008 + +/* GENI_FW_REVISION_RO fields */ +#define FW_REV_VERSION_MSK GENMASK(7, 0) /* GENI_OUTPUT_CTRL fields */ #define DEFAULT_IO_OUTPUT_CTRL_MSK GENMASK(6, 0) @@ -179,13 +264,22 @@ static const char * const icc_path_names[] = {"qup-core", "qup-config", /* SE_DMA_GENERAL_CFG */ #define DMA_RX_CLK_CGC_ON BIT(0) #define DMA_TX_CLK_CGC_ON BIT(1) -#define DMA_AHB_SLV_CFG_ON BIT(2) +#define DMA_AHB_SLV_CLK_CGC_ON BIT(2) #define AHB_SEC_SLV_CLK_CGC_ON BIT(3) #define DUMMY_RX_NON_BUFFERABLE BIT(4) #define RX_DMA_ZERO_PADDING_EN BIT(5) #define RX_DMA_IRQ_DELAY_MSK GENMASK(8, 6) #define RX_DMA_IRQ_DELAY_SHFT 6 +/* GENI_CLK_CTRL fields */ +#define SER_CLK_SEL BIT(0) + +/* GENI_DMA_IF_EN fields */ +#define DMA_IF_EN BIT(0) + +#define geni_setbits32(_addr, _v) writel(readl(_addr) | (_v), _addr) +#define geni_clrbits32(_addr, _v) writel(readl(_addr) & ~(_v), _addr) + /** * geni_se_get_qup_hw_version() - Read the QUP wrapper Hardware version * @se: Pointer to the corresponding serial engine. @@ -196,7 +290,7 @@ u32 geni_se_get_qup_hw_version(struct geni_se *se) { struct geni_wrapper *wrapper = se->wrapper; - return readl_relaxed(wrapper->base + QUP_HW_VER_REG); + return readl_relaxed(wrapper->base + QUPV3_HW_VER_REG); } EXPORT_SYMBOL_GPL(geni_se_get_qup_hw_version); @@ -220,12 +314,12 @@ static void geni_se_io_init(void __iomem *base) { u32 val; - val = readl_relaxed(base + GENI_CGC_CTRL); + val = readl_relaxed(base + SE_GENI_CGC_CTRL); val |= DEFAULT_CGC_EN; - writel_relaxed(val, base + GENI_CGC_CTRL); + writel_relaxed(val, base + SE_GENI_CGC_CTRL); val = readl_relaxed(base + SE_DMA_GENERAL_CFG); - val |= AHB_SEC_SLV_CLK_CGC_ON | DMA_AHB_SLV_CFG_ON; + val |= AHB_SEC_SLV_CLK_CGC_ON | DMA_AHB_SLV_CLK_CGC_ON; val |= DMA_TX_CLK_CGC_ON | DMA_RX_CLK_CGC_ON; writel_relaxed(val, base + SE_DMA_GENERAL_CFG); @@ -658,9 +752,12 @@ int geni_se_clk_freq_match(struct geni_se *se, unsigned long req_freq, } EXPORT_SYMBOL_GPL(geni_se_clk_freq_match); -#define GENI_SE_DMA_DONE_EN BIT(0) -#define GENI_SE_DMA_EOT_EN BIT(1) -#define GENI_SE_DMA_AHB_ERR_EN BIT(2) +#define GENI_SE_DMA_DONE_EN BIT(0) +#define GENI_SE_DMA_EOT_EN BIT(1) +#define GENI_SE_DMA_AHB_ERR_EN BIT(2) +#define GENI_SE_DMA_RESET_DONE_EN BIT(3) +#define GENI_SE_DMA_FLUSH_DONE BIT(4) + #define GENI_SE_DMA_EOT_BUF BIT(0) /** @@ -891,6 +988,377 @@ int geni_icc_disable(struct geni_se *se) } EXPORT_SYMBOL_GPL(geni_icc_disable); +/** + * geni_find_protocol_fw() - Locate and validate SE firmware for a protocol. + * @dev: Pointer to the device structure. + * @fw: Pointer to the firmware image. + * @protocol: Expected serial engine protocol type. + * + * Identifies the appropriate firmware image or configuration required for a + * specific communication protocol instance running on a Qualcomm GENI + * controller. + * + * Return: pointer to a valid 'struct se_fw_hdr' if found, or NULL otherwise. + */ +static struct se_fw_hdr *geni_find_protocol_fw(struct device *dev, const struct firmware *fw, + enum geni_se_protocol_type protocol) +{ + const struct elf32_hdr *ehdr; + const struct elf32_phdr *phdrs; + const struct elf32_phdr *phdr; + struct se_fw_hdr *sefw; + u32 fw_end, cfg_idx_end, cfg_val_end; + u16 fw_size; + int i; + + if (!fw || fw->size < sizeof(struct elf32_hdr)) + return NULL; + + ehdr = (const struct elf32_hdr *)fw->data; + phdrs = (const struct elf32_phdr *)(fw->data + ehdr->e_phoff); + + /* + * The firmware is expected to have at least two program headers (segments). + * One for metadata and the other for the actual protocol-specific firmware. + */ + if (ehdr->e_phnum < 2) { + dev_err(dev, "Invalid firmware: less than 2 program headers\n"); + return NULL; + } + + for (i = 0; i < ehdr->e_phnum; i++) { + phdr = &phdrs[i]; + + if (fw->size < phdr->p_offset + phdr->p_filesz) { + dev_err(dev, "Firmware size (%zu) < expected offset (%u) + size (%u)\n", + fw->size, phdr->p_offset, phdr->p_filesz); + return NULL; + } + + if (phdr->p_type != PT_LOAD || !phdr->p_memsz) + continue; + + if (MI_PBT_PAGE_MODE_VALUE(phdr->p_flags) != MI_PBT_NON_PAGED_SEGMENT || + MI_PBT_SEGMENT_TYPE_VALUE(phdr->p_flags) == MI_PBT_HASH_SEGMENT || + MI_PBT_ACCESS_TYPE_VALUE(phdr->p_flags) == MI_PBT_NOTUSED_SEGMENT || + MI_PBT_ACCESS_TYPE_VALUE(phdr->p_flags) == MI_PBT_SHARED_SEGMENT) + continue; + + if (phdr->p_filesz < sizeof(struct se_fw_hdr)) + continue; + + sefw = (struct se_fw_hdr *)(fw->data + phdr->p_offset); + fw_size = le16_to_cpu(sefw->fw_size_in_items); + fw_end = le16_to_cpu(sefw->fw_offset) + fw_size * sizeof(u32); + cfg_idx_end = le16_to_cpu(sefw->cfg_idx_offset) + + le16_to_cpu(sefw->cfg_size_in_items) * sizeof(u8); + cfg_val_end = le16_to_cpu(sefw->cfg_val_offset) + + le16_to_cpu(sefw->cfg_size_in_items) * sizeof(u32); + + if (le32_to_cpu(sefw->magic) != SE_MAGIC_NUM || le32_to_cpu(sefw->version) != 1) + continue; + + if (le32_to_cpu(sefw->serial_protocol) != protocol) + continue; + + if (fw_size % 2 != 0) { + fw_size++; + sefw->fw_size_in_items = cpu_to_le16(fw_size); + } + + if (fw_size >= MAX_GENI_CFG_RAMn_CNT) { + dev_err(dev, + "Firmware size (%u) exceeds max allowed RAMn count (%u)\n", + fw_size, MAX_GENI_CFG_RAMn_CNT); + continue; + } + + if (fw_end > phdr->p_filesz || cfg_idx_end > phdr->p_filesz || + cfg_val_end > phdr->p_filesz) { + dev_err(dev, "Truncated or corrupt SE FW segment found at index %d\n", i); + continue; + } + + return sefw; + } + + dev_err(dev, "Failed to get %s protocol firmware\n", protocol_name[protocol]); + return NULL; +} + +/** + * geni_configure_xfer_mode() - Set the transfer mode. + * @se: Pointer to the concerned serial engine. + * @mode: SE data transfer mode. + * + * Set the transfer mode to either FIFO or DMA according to the mode specified + * by the protocol driver. + * + * Return: 0 if successful, otherwise return an error value. + */ +static int geni_configure_xfer_mode(struct geni_se *se, enum geni_se_xfer_mode mode) +{ + /* Configure SE FIFO, DMA or GSI mode. */ + switch (mode) { + case GENI_GPI_DMA: + geni_setbits32(se->base + SE_GENI_DMA_MODE_EN, GENI_DMA_MODE_EN); + writel(0x0, se->base + SE_IRQ_EN); + writel(DMA_RX_EVENT_EN | DMA_TX_EVENT_EN | GENI_M_EVENT_EN | GENI_S_EVENT_EN, + se->base + SE_GSI_EVENT_EN); + break; + + case GENI_SE_FIFO: + geni_clrbits32(se->base + SE_GENI_DMA_MODE_EN, GENI_DMA_MODE_EN); + writel(DMA_RX_IRQ_EN | DMA_TX_IRQ_EN | GENI_M_IRQ_EN | GENI_S_IRQ_EN, + se->base + SE_IRQ_EN); + writel(0x0, se->base + SE_GSI_EVENT_EN); + break; + + case GENI_SE_DMA: + geni_setbits32(se->base + SE_GENI_DMA_MODE_EN, GENI_DMA_MODE_EN); + writel(DMA_RX_IRQ_EN | DMA_TX_IRQ_EN | GENI_M_IRQ_EN | GENI_S_IRQ_EN, + se->base + SE_IRQ_EN); + writel(0x0, se->base + SE_GSI_EVENT_EN); + break; + + default: + dev_err(se->dev, "Invalid geni-se transfer mode: %d\n", mode); + return -EINVAL; + } + return 0; +} + +/** + * geni_enable_interrupts() - Enable interrupts. + * @se: Pointer to the concerned serial engine. + * + * Enable the required interrupts during the firmware load process. + */ +static void geni_enable_interrupts(struct geni_se *se) +{ + u32 val; + + /* Enable required interrupts. */ + writel(M_COMMON_GENI_M_IRQ_EN, se->base + SE_GENI_M_IRQ_EN); + + val = S_CMD_OVERRUN_EN | S_ILLEGAL_CMD_EN | S_CMD_CANCEL_EN | S_CMD_ABORT_EN | + S_GP_IRQ_0_EN | S_GP_IRQ_1_EN | S_GP_IRQ_2_EN | S_GP_IRQ_3_EN | + S_RX_FIFO_WR_ERR_EN | S_RX_FIFO_RD_ERR_EN; + writel(val, se->base + SE_GENI_S_IRQ_ENABLE); + + /* DMA mode configuration. */ + val = GENI_SE_DMA_RESET_DONE_EN | GENI_SE_DMA_AHB_ERR_EN | GENI_SE_DMA_DONE_EN; + writel(val, se->base + SE_DMA_TX_IRQ_EN_SET); + val = GENI_SE_DMA_FLUSH_DONE | GENI_SE_DMA_RESET_DONE_EN | GENI_SE_DMA_AHB_ERR_EN | + GENI_SE_DMA_DONE_EN; + writel(val, se->base + SE_DMA_RX_IRQ_EN_SET); +} + +/** + * geni_write_fw_revision() - Write the firmware revision. + * @se: Pointer to the concerned serial engine. + * @serial_protocol: serial protocol type. + * @fw_version: QUP firmware version. + * + * Write the firmware revision and protocol into the respective register. + */ +static void geni_write_fw_revision(struct geni_se *se, u16 serial_protocol, u16 fw_version) +{ + u32 reg; + + reg = FIELD_PREP(FW_REV_PROTOCOL_MSK, serial_protocol); + reg |= FIELD_PREP(FW_REV_VERSION_MSK, fw_version); + + writel(reg, se->base + SE_GENI_FW_REVISION); + writel(reg, se->base + SE_GENI_S_FW_REVISION); +} + +/** + * geni_load_se_fw() - Load Serial Engine specific firmware. + * @se: Pointer to the concerned serial engine. + * @fw: Pointer to the firmware structure. + * @mode: SE data transfer mode. + * @protocol: Protocol type to be used with the SE (e.g., UART, SPI, I2C). + * + * Load the protocol firmware into the IRAM of the Serial Engine. + * + * Return: 0 if successful, otherwise return an error value. + */ +static int geni_load_se_fw(struct geni_se *se, const struct firmware *fw, + enum geni_se_xfer_mode mode, enum geni_se_protocol_type protocol) +{ + const u32 *fw_data, *cfg_val_arr; + const u8 *cfg_idx_arr; + u32 i, reg_value; + int ret; + struct se_fw_hdr *hdr; + + hdr = geni_find_protocol_fw(se->dev, fw, protocol); + if (!hdr) + return -EINVAL; + + fw_data = (const u32 *)((u8 *)hdr + le16_to_cpu(hdr->fw_offset)); + cfg_idx_arr = (const u8 *)hdr + le16_to_cpu(hdr->cfg_idx_offset); + cfg_val_arr = (const u32 *)((u8 *)hdr + le16_to_cpu(hdr->cfg_val_offset)); + + ret = geni_icc_set_bw(se); + if (ret) + return ret; + + ret = geni_icc_enable(se); + if (ret) + return ret; + + ret = geni_se_resources_on(se); + if (ret) + goto out_icc_disable; + + /* + * Disable high-priority interrupts until all currently executing + * low-priority interrupts have been fully handled. + */ + geni_setbits32(se->wrapper->base + QUPV3_COMMON_CFG, FAST_SWITCH_TO_HIGH_DISABLE); + + /* Set AHB_M_CLK_CGC_ON to indicate hardware controls se-wrapper cgc clock. */ + geni_setbits32(se->wrapper->base + QUPV3_SE_AHB_M_CFG, AHB_M_CLK_CGC_ON); + + /* Let hardware to control common cgc. */ + geni_setbits32(se->wrapper->base + QUPV3_COMMON_CGC_CTRL, COMMON_CSR_SLV_CLK_CGC_ON); + + /* + * Setting individual bits in GENI_OUTPUT_CTRL activates corresponding output lines, + * allowing the hardware to drive data as configured. + */ + writel(0x0, se->base + GENI_OUTPUT_CTRL); + + /* Set SCLK and HCLK to program RAM */ + geni_setbits32(se->base + SE_GENI_CGC_CTRL, PROG_RAM_SCLK_OFF | PROG_RAM_HCLK_OFF); + writel(0x0, se->base + SE_GENI_CLK_CTRL); + geni_clrbits32(se->base + SE_GENI_CGC_CTRL, PROG_RAM_SCLK_OFF | PROG_RAM_HCLK_OFF); + + /* Enable required clocks for DMA CSR, TX and RX. */ + reg_value = AHB_SEC_SLV_CLK_CGC_ON | DMA_AHB_SLV_CLK_CGC_ON | + DMA_TX_CLK_CGC_ON | DMA_RX_CLK_CGC_ON; + geni_setbits32(se->base + SE_DMA_GENERAL_CFG, reg_value); + + /* Let hardware control CGC by default. */ + writel(DEFAULT_CGC_EN, se->base + SE_GENI_CGC_CTRL); + + /* Set version of the configuration register part of firmware. */ + writel(le16_to_cpu(hdr->cfg_version), se->base + SE_GENI_INIT_CFG_REVISION); + writel(le16_to_cpu(hdr->cfg_version), se->base + SE_GENI_S_INIT_CFG_REVISION); + + /* Configure GENI primitive table. */ + for (i = 0; i < le16_to_cpu(hdr->cfg_size_in_items); i++) + writel(cfg_val_arr[i], + se->base + SE_GENI_CFG_REG0 + (cfg_idx_arr[i] * sizeof(u32))); + + /* Configure condition for assertion of RX_RFR_WATERMARK condition. */ + reg_value = geni_se_get_rx_fifo_depth(se); + writel(reg_value - 2, se->base + SE_GENI_RX_RFR_WATERMARK_REG); + + /* Let hardware control CGC */ + geni_setbits32(se->base + GENI_OUTPUT_CTRL, DEFAULT_IO_OUTPUT_CTRL_MSK); + + ret = geni_configure_xfer_mode(se, mode); + if (ret) + goto out_resources_off; + + geni_enable_interrupts(se); + + geni_write_fw_revision(se, le16_to_cpu(hdr->serial_protocol), le16_to_cpu(hdr->fw_version)); + + /* Program RAM address space. */ + memcpy_toio(se->base + SE_GENI_CFG_RAMN, fw_data, + le16_to_cpu(hdr->fw_size_in_items) * sizeof(u32)); + + /* Put default values on GENI's output pads. */ + writel_relaxed(0x1, se->base + GENI_FORCE_DEFAULT_REG); + + /* Toggle SCLK/HCLK from high to low to finalize RAM programming and apply config. */ + geni_setbits32(se->base + SE_GENI_CGC_CTRL, PROG_RAM_SCLK_OFF | PROG_RAM_HCLK_OFF); + geni_setbits32(se->base + SE_GENI_CLK_CTRL, SER_CLK_SEL); + geni_clrbits32(se->base + SE_GENI_CGC_CTRL, PROG_RAM_SCLK_OFF | PROG_RAM_HCLK_OFF); + + /* Serial engine DMA interface is enabled. */ + geni_setbits32(se->base + SE_DMA_IF_EN, DMA_IF_EN); + + /* Enable or disable FIFO interface of the serial engine. */ + if (mode == GENI_SE_FIFO) + geni_clrbits32(se->base + SE_FIFO_IF_DISABLE, FIFO_IF_DISABLE); + else + geni_setbits32(se->base + SE_FIFO_IF_DISABLE, FIFO_IF_DISABLE); + +out_resources_off: + geni_se_resources_off(se); + +out_icc_disable: + geni_icc_disable(se); + return ret; +} + +/** + * geni_load_se_firmware() - Load firmware for SE based on protocol + * @se: Pointer to the concerned serial engine. + * @protocol: Protocol type to be used with the SE (e.g., UART, SPI, I2C). + * + * Retrieves the firmware name from device properties and sets the transfer mode + * (FIFO or GSI DMA) based on device tree configuration. Enforces FIFO mode for + * UART protocol due to lack of GSI DMA support. Requests the firmware and loads + * it into the SE. + * + * Return: 0 on success, negative error code on failure. + */ +int geni_load_se_firmware(struct geni_se *se, enum geni_se_protocol_type protocol) +{ + const char *fw_name; + const struct firmware *fw; + enum geni_se_xfer_mode mode = GENI_SE_FIFO; + int ret; + + if (protocol >= ARRAY_SIZE(protocol_name)) { + dev_err(se->dev, "Invalid geni-se protocol: %d", protocol); + return -EINVAL; + } + + ret = device_property_read_string(se->wrapper->dev, "firmware-name", &fw_name); + if (ret) { + dev_err(se->dev, "Failed to read firmware-name property: %d\n", ret); + return -EINVAL; + } + + if (of_property_read_bool(se->dev->of_node, "qcom,enable-gsi-dma")) + mode = GENI_GPI_DMA; + + /* GSI mode is not supported by the UART driver; therefore, setting FIFO mode */ + if (protocol == GENI_SE_UART) + mode = GENI_SE_FIFO; + + ret = request_firmware(&fw, fw_name, se->dev); + if (ret) { + if (ret == -ENOENT) + return -EPROBE_DEFER; + + dev_err(se->dev, "Failed to request firmware '%s' for protocol %d: ret: %d\n", + fw_name, protocol, ret); + return ret; + } + + ret = geni_load_se_fw(se, fw, mode, protocol); + release_firmware(fw); + + if (ret) { + dev_err(se->dev, "Failed to load SE firmware for protocol %d: ret: %d\n", + protocol, ret); + return ret; + } + + dev_dbg(se->dev, "Firmware load for %s protocol is successful for xfer mode: %d\n", + protocol_name[protocol], mode); + return 0; +} +EXPORT_SYMBOL_GPL(geni_load_se_firmware); + static int geni_se_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; diff --git a/drivers/soc/qcom/qcom_pd_mapper.c b/drivers/soc/qcom/qcom_pd_mapper.c index 3abea241b1c4..6384f271953d 100644 --- a/drivers/soc/qcom/qcom_pd_mapper.c +++ b/drivers/soc/qcom/qcom_pd_mapper.c @@ -584,6 +584,7 @@ static const struct of_device_id qcom_pdm_domains[] __maybe_unused = { { .compatible = "qcom,sm8450", .data = sm8350_domains, }, { .compatible = "qcom,sm8550", .data = sm8550_domains, }, { .compatible = "qcom,sm8650", .data = sm8550_domains, }, + { .compatible = "qcom,sm8750", .data = sm8550_domains, }, { .compatible = "qcom,x1e80100", .data = x1e80100_domains, }, { .compatible = "qcom,x1p42100", .data = x1e80100_domains, }, {}, diff --git a/drivers/soc/qcom/ramp_controller.c b/drivers/soc/qcom/ramp_controller.c index 349bdfbc61ef..15782bed2925 100644 --- a/drivers/soc/qcom/ramp_controller.c +++ b/drivers/soc/qcom/ramp_controller.c @@ -229,7 +229,6 @@ static const struct regmap_config qrc_regmap_config = { .reg_stride = 4, .val_bits = 32, .max_register = 0x68, - .fast_io = true, }; static const struct reg_sequence msm8976_cfg_dfs_sid[] = { diff --git a/drivers/soc/qcom/rpm_master_stats.c b/drivers/soc/qcom/rpm_master_stats.c index 49e4f9457279..c7788337e164 100644 --- a/drivers/soc/qcom/rpm_master_stats.c +++ b/drivers/soc/qcom/rpm_master_stats.c @@ -78,7 +78,7 @@ static int master_stats_probe(struct platform_device *pdev) if (count < 0) return count; - data = devm_kzalloc(dev, count * sizeof(*data), GFP_KERNEL); + data = devm_kcalloc(dev, count, sizeof(*data), GFP_KERNEL); if (!data) return -ENOMEM; diff --git a/drivers/soc/qcom/rpmh-rsc.c b/drivers/soc/qcom/rpmh-rsc.c index fdab2b1067db..c6f7d5c9c493 100644 --- a/drivers/soc/qcom/rpmh-rsc.c +++ b/drivers/soc/qcom/rpmh-rsc.c @@ -453,13 +453,10 @@ static irqreturn_t tcs_tx_done(int irq, void *p) trace_rpmh_tx_done(drv, i, req); - /* - * If wake tcs was re-purposed for sending active - * votes, clear AMC trigger & enable modes and + /* Clear AMC trigger & enable modes and * disable interrupt for this TCS */ - if (!drv->tcs[ACTIVE_TCS].num_tcs) - __tcs_set_trigger(drv, i, false); + __tcs_set_trigger(drv, i, false); skip: /* Reclaim the TCS */ write_tcs_reg(drv, drv->regs[RSC_DRV_CMD_ENABLE], i, 0); diff --git a/drivers/soc/qcom/smem.c b/drivers/soc/qcom/smem.c index cf425930539e..c4c45f15dca4 100644 --- a/drivers/soc/qcom/smem.c +++ b/drivers/soc/qcom/smem.c @@ -898,7 +898,7 @@ static u32 qcom_smem_get_item_count(struct qcom_smem *smem) if (IS_ERR_OR_NULL(ptable)) return SMEM_ITEM_COUNT; - info = (struct smem_info *)&ptable->entry[ptable->num_entries]; + info = (struct smem_info *)&ptable->entry[le32_to_cpu(ptable->num_entries)]; if (memcmp(info->magic, SMEM_INFO_MAGIC, sizeof(info->magic))) return SMEM_ITEM_COUNT; |