diff options
Diffstat (limited to 'drivers/spi')
| -rw-r--r-- | drivers/spi/spi-imx.c | 15 | ||||
| -rw-r--r-- | drivers/spi/spi-xilinx.c | 2 | ||||
| -rw-r--r-- | drivers/spi/spi.c | 12 |
3 files changed, 24 insertions, 5 deletions
diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index 155ddeb8fcd4..bbf1fd4fe1e9 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -519,9 +519,15 @@ static void mx51_ecspi_trigger(struct spi_imx_data *spi_imx) { u32 reg; - reg = readl(spi_imx->base + MX51_ECSPI_CTRL); - reg |= MX51_ECSPI_CTRL_XCH; - writel(reg, spi_imx->base + MX51_ECSPI_CTRL); + if (spi_imx->usedma) { + reg = readl(spi_imx->base + MX51_ECSPI_DMA); + reg |= MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN; + writel(reg, spi_imx->base + MX51_ECSPI_DMA); + } else { + reg = readl(spi_imx->base + MX51_ECSPI_CTRL); + reg |= MX51_ECSPI_CTRL_XCH; + writel(reg, spi_imx->base + MX51_ECSPI_CTRL); + } } static void mx51_ecspi_disable(struct spi_imx_data *spi_imx) @@ -759,7 +765,6 @@ static void mx51_setup_wml(struct spi_imx_data *spi_imx) writel(MX51_ECSPI_DMA_RX_WML(spi_imx->wml - 1) | MX51_ECSPI_DMA_TX_WML(tx_wml) | MX51_ECSPI_DMA_RXT_WML(spi_imx->wml) | - MX51_ECSPI_DMA_TEDEN | MX51_ECSPI_DMA_RXDEN | MX51_ECSPI_DMA_RXTDEN, spi_imx->base + MX51_ECSPI_DMA); } @@ -1520,6 +1525,8 @@ static int spi_imx_dma_transfer(struct spi_imx_data *spi_imx, reinit_completion(&spi_imx->dma_tx_completion); dma_async_issue_pending(controller->dma_tx); + spi_imx->devtype_data->trigger(spi_imx); + transfer_timeout = spi_imx_calculate_timeout(spi_imx, transfer->len); /* Wait SDMA to finish the data transfer.*/ diff --git a/drivers/spi/spi-xilinx.c b/drivers/spi/spi-xilinx.c index d59cc8a18484..c86dc56f38b4 100644 --- a/drivers/spi/spi-xilinx.c +++ b/drivers/spi/spi-xilinx.c @@ -300,7 +300,7 @@ static int xilinx_spi_txrx_bufs(struct spi_device *spi, struct spi_transfer *t) /* Read out all the data from the Rx FIFO */ rx_words = n_words; - stalled = 10; + stalled = 32; while (rx_words) { if (rx_words == n_words && !(stalled--) && !(sr & XSPI_SR_TX_EMPTY_MASK) && diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 2e0647a06890..e25df9990f82 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -2851,6 +2851,18 @@ static acpi_status acpi_register_spi_device(struct spi_controller *ctlr, acpi_set_modalias(adev, acpi_device_hid(adev), spi->modalias, sizeof(spi->modalias)); + /* + * This gets re-tried in spi_probe() for -EPROBE_DEFER handling in case + * the GPIO controller does not have a driver yet. This needs to be done + * here too, because this call sets the GPIO direction and/or bias. + * Setting these needs to be done even if there is no driver, in which + * case spi_probe() will never get called. + * TODO: ideally the setup of the GPIO should be handled in a generic + * manner in the ACPI/gpiolib core code. + */ + if (spi->irq < 0) + spi->irq = acpi_dev_gpio_irq_get(adev, 0); + acpi_device_set_enumerated(adev); adev->power.flags.ignore_parent = true; |