diff options
Diffstat (limited to 'drivers/usb/host/xhci-hub.c')
| -rw-r--r-- | drivers/usb/host/xhci-hub.c | 244 |
1 files changed, 122 insertions, 122 deletions
diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 32cd52ca8318..a4b95d019f84 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -189,9 +189,10 @@ static void xhci_usb2_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci, __u8 port_removable[(USB_MAXCHILDREN + 1 + 7) / 8]; u32 portsc; unsigned int i; + struct xhci_hub *rhub; - ports = xhci->num_usb2_ports; - + rhub = &xhci->usb2_rhub; + ports = rhub->num_ports; xhci_common_hub_descriptor(xhci, desc, ports); desc->bDescriptorType = USB_DT_HUB; temp = 1 + (ports / 8); @@ -202,7 +203,7 @@ static void xhci_usb2_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci, */ memset(port_removable, 0, sizeof(port_removable)); for (i = 0; i < ports; i++) { - portsc = readl(xhci->usb2_ports[i]); + portsc = readl(rhub->ports[i]->addr); /* If a device is removable, PORTSC reports a 0, same as in the * hub descriptor DeviceRemovable bits. */ @@ -241,8 +242,10 @@ static void xhci_usb3_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci, u16 port_removable; u32 portsc; unsigned int i; + struct xhci_hub *rhub; - ports = xhci->num_usb3_ports; + rhub = &xhci->usb3_rhub; + ports = rhub->num_ports; xhci_common_hub_descriptor(xhci, desc, ports); desc->bDescriptorType = USB_DT_SS_HUB; desc->bDescLength = USB_DT_SS_HUB_SIZE; @@ -256,7 +259,7 @@ static void xhci_usb3_hub_descriptor(struct usb_hcd *hcd, struct xhci_hcd *xhci, port_removable = 0; /* bit 0 is reserved, bit 1 is for port 1, etc. */ for (i = 0; i < ports; i++) { - portsc = readl(xhci->usb3_ports[i]); + portsc = readl(rhub->ports[i]->addr); if (portsc & PORT_DEV_REMOVE) port_removable |= 1 << (i + 1); } @@ -538,28 +541,13 @@ static void xhci_clear_port_change_bit(struct xhci_hcd *xhci, u16 wValue, port_change_bit, wIndex, port_status); } -static int xhci_get_ports(struct usb_hcd *hcd, __le32 __iomem ***port_array) +struct xhci_hub *xhci_get_rhub(struct usb_hcd *hcd) { - int max_ports; struct xhci_hcd *xhci = hcd_to_xhci(hcd); - if (hcd->speed >= HCD_USB3) { - max_ports = xhci->num_usb3_ports; - *port_array = xhci->usb3_ports; - } else { - max_ports = xhci->num_usb2_ports; - *port_array = xhci->usb2_ports; - } - - return max_ports; -} - -static __le32 __iomem *xhci_get_port_io_addr(struct usb_hcd *hcd, int index) -{ - __le32 __iomem **port_array; - - xhci_get_ports(hcd, &port_array); - return port_array[index]; + if (hcd->speed >= HCD_USB3) + return &xhci->usb3_rhub; + return &xhci->usb2_rhub; } /* @@ -570,21 +558,23 @@ static __le32 __iomem *xhci_get_port_io_addr(struct usb_hcd *hcd, int index) static void xhci_set_port_power(struct xhci_hcd *xhci, struct usb_hcd *hcd, u16 index, bool on, unsigned long *flags) { - __le32 __iomem *addr; + struct xhci_hub *rhub; + struct xhci_port *port; u32 temp; - addr = xhci_get_port_io_addr(hcd, index); - temp = readl(addr); + rhub = xhci_get_rhub(hcd); + port = rhub->ports[index]; + temp = readl(port->addr); temp = xhci_port_state_to_neutral(temp); if (on) { /* Power on */ - writel(temp | PORT_POWER, addr); - temp = readl(addr); + writel(temp | PORT_POWER, port->addr); + temp = readl(port->addr); xhci_dbg(xhci, "set port power, actual port %d status = 0x%x\n", index, temp); } else { /* Power off */ - writel(temp & ~PORT_POWER, addr); + writel(temp & ~PORT_POWER, port->addr); } spin_unlock_irqrestore(&xhci->lock, *flags); @@ -600,13 +590,13 @@ static void xhci_port_set_test_mode(struct xhci_hcd *xhci, u16 test_mode, u16 wIndex) { u32 temp; - __le32 __iomem *addr; + struct xhci_port *port; - /* xhci only supports test mode for usb2 ports, i.e. xhci->main_hcd */ - addr = xhci_get_port_io_addr(xhci->main_hcd, wIndex); - temp = readl(addr + PORTPMSC); + /* xhci only supports test mode for usb2 ports */ + port = xhci->usb2_rhub.ports[wIndex]; + temp = readl(port->addr + PORTPMSC); temp |= test_mode << PORT_TEST_MODE_SHIFT; - writel(temp, addr + PORTPMSC); + writel(temp, port->addr + PORTPMSC); xhci->test_mode = test_mode; if (test_mode == TEST_FORCE_EN) xhci_start(xhci); @@ -633,10 +623,10 @@ static int xhci_enter_test_mode(struct xhci_hcd *xhci, /* Put all ports to the Disable state by clear PP */ xhci_dbg(xhci, "Disable all port (PP = 0)\n"); /* Power off USB3 ports*/ - for (i = 0; i < xhci->num_usb3_ports; i++) + for (i = 0; i < xhci->usb3_rhub.num_ports; i++) xhci_set_port_power(xhci, xhci->shared_hcd, i, false, flags); /* Power off USB2 ports*/ - for (i = 0; i < xhci->num_usb2_ports; i++) + for (i = 0; i < xhci->usb2_rhub.num_ports; i++) xhci_set_port_power(xhci, xhci->main_hcd, i, false, flags); /* Stop the controller */ xhci_dbg(xhci, "Stop controller\n"); @@ -672,24 +662,24 @@ static int xhci_exit_test_mode(struct xhci_hcd *xhci) return xhci_reset(xhci); } -void xhci_set_link_state(struct xhci_hcd *xhci, __le32 __iomem **port_array, - int port_id, u32 link_state) +void xhci_set_link_state(struct xhci_hcd *xhci, struct xhci_port *port, + u32 link_state) { u32 temp; - temp = readl(port_array[port_id]); + temp = readl(port->addr); temp = xhci_port_state_to_neutral(temp); temp &= ~PORT_PLS_MASK; temp |= PORT_LINK_STROBE | link_state; - writel(temp, port_array[port_id]); + writel(temp, port->addr); } static void xhci_set_remote_wake_mask(struct xhci_hcd *xhci, - __le32 __iomem **port_array, int port_id, u16 wake_mask) + struct xhci_port *port, u16 wake_mask) { u32 temp; - temp = readl(port_array[port_id]); + temp = readl(port->addr); temp = xhci_port_state_to_neutral(temp); if (wake_mask & USB_PORT_FEAT_REMOTE_WAKE_CONNECT) @@ -707,20 +697,20 @@ static void xhci_set_remote_wake_mask(struct xhci_hcd *xhci, else temp &= ~PORT_WKOC_E; - writel(temp, port_array[port_id]); + writel(temp, port->addr); } /* Test and clear port RWC bit */ -void xhci_test_and_clear_bit(struct xhci_hcd *xhci, __le32 __iomem **port_array, - int port_id, u32 port_bit) +void xhci_test_and_clear_bit(struct xhci_hcd *xhci, struct xhci_port *port, + u32 port_bit) { u32 temp; - temp = readl(port_array[port_id]); + temp = readl(port->addr); if (temp & port_bit) { temp = xhci_port_state_to_neutral(temp); temp |= port_bit; - writel(temp, port_array[port_id]); + writel(temp, port->addr); } } @@ -794,7 +784,7 @@ static void xhci_hub_report_usb3_link_state(struct xhci_hcd *xhci, static void xhci_del_comp_mod_timer(struct xhci_hcd *xhci, u32 status, u16 wIndex) { - u32 all_ports_seen_u0 = ((1 << xhci->num_usb3_ports)-1); + u32 all_ports_seen_u0 = ((1 << xhci->usb3_rhub.num_ports) - 1); bool port_in_u0 = ((status & PORT_PLS_MASK) == XDEV_U0); if (!(xhci->quirks & XHCI_COMP_MODE_QUIRK)) @@ -840,8 +830,7 @@ static u32 xhci_get_ext_port_status(u32 raw_port_status, u32 port_li) */ static u32 xhci_get_port_status(struct usb_hcd *hcd, struct xhci_bus_state *bus_state, - __le32 __iomem **port_array, - u16 wIndex, u32 raw_port_status, + u16 wIndex, u32 raw_port_status, unsigned long flags) __releases(&xhci->lock) __acquires(&xhci->lock) @@ -849,6 +838,11 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, struct xhci_hcd *xhci = hcd_to_xhci(hcd); u32 status = 0; int slot_id; + struct xhci_hub *rhub; + struct xhci_port *port; + + rhub = xhci_get_rhub(hcd); + port = rhub->ports[wIndex]; /* wPortChange bits */ if (raw_port_status & PORT_CSC) @@ -919,10 +913,8 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, set_bit(wIndex, &bus_state->rexit_ports); - xhci_test_and_clear_bit(xhci, port_array, wIndex, - PORT_PLC); - xhci_set_link_state(xhci, port_array, wIndex, - XDEV_U0); + xhci_test_and_clear_bit(xhci, port, PORT_PLC); + xhci_set_link_state(xhci, port, XDEV_U0); spin_unlock_irqrestore(&xhci->lock, flags); time_left = wait_for_completion_timeout( @@ -940,7 +932,7 @@ static u32 xhci_get_port_status(struct usb_hcd *hcd, } xhci_ring_device(xhci, slot_id); } else { - int port_status = readl(port_array[wIndex]); + int port_status = readl(port->addr); xhci_warn(xhci, "Port resume took longer than %i msec, port status = 0x%x\n", XHCI_MAX_REXIT_TIMEOUT, port_status); @@ -1024,15 +1016,18 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, unsigned long flags; u32 temp, status; int retval = 0; - __le32 __iomem **port_array; int slot_id; struct xhci_bus_state *bus_state; u16 link_state = 0; u16 wake_mask = 0; u16 timeout = 0; u16 test_mode = 0; + struct xhci_hub *rhub; + struct xhci_port **ports; - max_ports = xhci_get_ports(hcd, &port_array); + rhub = xhci_get_rhub(hcd); + ports = rhub->ports; + max_ports = rhub->num_ports; bus_state = &xhci->bus_state[hcd_index(hcd)]; spin_lock_irqsave(&xhci->lock, flags); @@ -1070,15 +1065,15 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, if (!wIndex || wIndex > max_ports) goto error; wIndex--; - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); if (temp == ~(u32)0) { xhci_hc_died(xhci); retval = -ENODEV; break; } trace_xhci_get_port_status(wIndex, temp); - status = xhci_get_port_status(hcd, bus_state, port_array, - wIndex, temp, flags); + status = xhci_get_port_status(hcd, bus_state, wIndex, temp, + flags); if (status == 0xffffffff) goto error; @@ -1096,7 +1091,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, retval = -EINVAL; break; } - port_li = readl(port_array[wIndex] + PORTLI); + port_li = readl(ports[wIndex]->addr + PORTLI); status = xhci_get_ext_port_status(temp, port_li); put_unaligned_le32(cpu_to_le32(status), &buf[4]); } @@ -1114,7 +1109,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, if (!wIndex || wIndex > max_ports) goto error; wIndex--; - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); if (temp == ~(u32)0) { xhci_hc_died(xhci); retval = -ENODEV; @@ -1124,10 +1119,10 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, /* FIXME: What new port features do we need to support? */ switch (wValue) { case USB_PORT_FEAT_SUSPEND: - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); if ((temp & PORT_PLS_MASK) != XDEV_U0) { /* Resume the port to U0 first */ - xhci_set_link_state(xhci, port_array, wIndex, + xhci_set_link_state(xhci, ports[wIndex], XDEV_U0); spin_unlock_irqrestore(&xhci->lock, flags); msleep(10); @@ -1137,7 +1132,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, * a port unless the port reports that it is in the * enabled (PED = ‘1’,PLS < ‘3’) state. */ - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); if ((temp & PORT_PE) == 0 || (temp & PORT_RESET) || (temp & PORT_PLS_MASK) >= XDEV_U3) { xhci_warn(xhci, "USB core suspending device not in U0/U1/U2.\n"); @@ -1155,18 +1150,17 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, xhci_stop_device(xhci, slot_id, 1); spin_lock_irqsave(&xhci->lock, flags); - xhci_set_link_state(xhci, port_array, wIndex, XDEV_U3); + xhci_set_link_state(xhci, ports[wIndex], XDEV_U3); spin_unlock_irqrestore(&xhci->lock, flags); msleep(10); /* wait device to enter */ spin_lock_irqsave(&xhci->lock, flags); - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); bus_state->suspended_ports |= 1 << wIndex; break; case USB_PORT_FEAT_LINK_STATE: - temp = readl(port_array[wIndex]); - + temp = readl(ports[wIndex]->addr); /* Disable port */ if (link_state == USB_SS_PORT_LS_SS_DISABLED) { xhci_dbg(xhci, "Disable port %d\n", wIndex); @@ -1178,17 +1172,17 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, temp |= PORT_CSC | PORT_PEC | PORT_WRC | PORT_OCC | PORT_RC | PORT_PLC | PORT_CEC; - writel(temp | PORT_PE, port_array[wIndex]); - temp = readl(port_array[wIndex]); + writel(temp | PORT_PE, ports[wIndex]->addr); + temp = readl(ports[wIndex]->addr); break; } /* Put link in RxDetect (enable port) */ if (link_state == USB_SS_PORT_LS_RX_DETECT) { xhci_dbg(xhci, "Enable port %d\n", wIndex); - xhci_set_link_state(xhci, port_array, wIndex, - link_state); - temp = readl(port_array[wIndex]); + xhci_set_link_state(xhci, ports[wIndex], + link_state); + temp = readl(ports[wIndex]->addr); break; } @@ -1219,9 +1213,10 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, xhci_dbg(xhci, "Enable compliance mode transition for port %d\n", wIndex); - xhci_set_link_state(xhci, port_array, wIndex, + xhci_set_link_state(xhci, ports[wIndex], link_state); - temp = readl(port_array[wIndex]); + + temp = readl(ports[wIndex]->addr); break; } /* Port must be enabled */ @@ -1248,14 +1243,13 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, } } - xhci_set_link_state(xhci, port_array, wIndex, - link_state); + xhci_set_link_state(xhci, ports[wIndex], link_state); spin_unlock_irqrestore(&xhci->lock, flags); msleep(20); /* wait device to enter */ spin_lock_irqsave(&xhci->lock, flags); - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); if (link_state == USB_SS_PORT_LS_U3) bus_state->suspended_ports |= 1 << wIndex; break; @@ -1270,40 +1264,39 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, break; case USB_PORT_FEAT_RESET: temp = (temp | PORT_RESET); - writel(temp, port_array[wIndex]); + writel(temp, ports[wIndex]->addr); - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); xhci_dbg(xhci, "set port reset, actual port %d status = 0x%x\n", wIndex, temp); break; case USB_PORT_FEAT_REMOTE_WAKE_MASK: - xhci_set_remote_wake_mask(xhci, port_array, - wIndex, wake_mask); - temp = readl(port_array[wIndex]); + xhci_set_remote_wake_mask(xhci, ports[wIndex], + wake_mask); + temp = readl(ports[wIndex]->addr); xhci_dbg(xhci, "set port remote wake mask, " "actual port %d status = 0x%x\n", wIndex, temp); break; case USB_PORT_FEAT_BH_PORT_RESET: temp |= PORT_WR; - writel(temp, port_array[wIndex]); - - temp = readl(port_array[wIndex]); + writel(temp, ports[wIndex]->addr); + temp = readl(ports[wIndex]->addr); break; case USB_PORT_FEAT_U1_TIMEOUT: if (hcd->speed < HCD_USB3) goto error; - temp = readl(port_array[wIndex] + PORTPMSC); + temp = readl(ports[wIndex]->addr + PORTPMSC); temp &= ~PORT_U1_TIMEOUT_MASK; temp |= PORT_U1_TIMEOUT(timeout); - writel(temp, port_array[wIndex] + PORTPMSC); + writel(temp, ports[wIndex]->addr + PORTPMSC); break; case USB_PORT_FEAT_U2_TIMEOUT: if (hcd->speed < HCD_USB3) goto error; - temp = readl(port_array[wIndex] + PORTPMSC); + temp = readl(ports[wIndex]->addr + PORTPMSC); temp &= ~PORT_U2_TIMEOUT_MASK; temp |= PORT_U2_TIMEOUT(timeout); - writel(temp, port_array[wIndex] + PORTPMSC); + writel(temp, ports[wIndex]->addr + PORTPMSC); break; case USB_PORT_FEAT_TEST: /* 4.19.6 Port Test Modes (USB2 Test Mode) */ @@ -1318,13 +1311,13 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, goto error; } /* unblock any posted writes */ - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); break; case ClearPortFeature: if (!wIndex || wIndex > max_ports) goto error; wIndex--; - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); if (temp == ~(u32)0) { xhci_hc_died(xhci); retval = -ENODEV; @@ -1334,7 +1327,7 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, temp = xhci_port_state_to_neutral(temp); switch (wValue) { case USB_PORT_FEAT_SUSPEND: - temp = readl(port_array[wIndex]); + temp = readl(ports[wIndex]->addr); xhci_dbg(xhci, "clear USB_PORT_FEAT_SUSPEND\n"); xhci_dbg(xhci, "PORTSC %04x\n", temp); if (temp & PORT_RESET) @@ -1344,12 +1337,12 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, goto error; set_bit(wIndex, &bus_state->resuming_ports); - xhci_set_link_state(xhci, port_array, wIndex, - XDEV_RESUME); + xhci_set_link_state(xhci, ports[wIndex], + XDEV_RESUME); spin_unlock_irqrestore(&xhci->lock, flags); msleep(USB_RESUME_TIMEOUT); spin_lock_irqsave(&xhci->lock, flags); - xhci_set_link_state(xhci, port_array, wIndex, + xhci_set_link_state(xhci, ports[wIndex], XDEV_U0); clear_bit(wIndex, &bus_state->resuming_ports); } @@ -1374,11 +1367,11 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, case USB_PORT_FEAT_C_PORT_LINK_STATE: case USB_PORT_FEAT_C_PORT_CONFIG_ERROR: xhci_clear_port_change_bit(xhci, wValue, wIndex, - port_array[wIndex], temp); + ports[wIndex]->addr, temp); break; case USB_PORT_FEAT_ENABLE: xhci_disable_port(hcd, xhci, wIndex, - port_array[wIndex], temp); + ports[wIndex]->addr, temp); break; case USB_PORT_FEAT_POWER: xhci_set_port_power(xhci, hcd, wIndex, false, &flags); @@ -1415,11 +1408,14 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) int i, retval; struct xhci_hcd *xhci = hcd_to_xhci(hcd); int max_ports; - __le32 __iomem **port_array; struct xhci_bus_state *bus_state; bool reset_change = false; + struct xhci_hub *rhub; + struct xhci_port **ports; - max_ports = xhci_get_ports(hcd, &port_array); + rhub = xhci_get_rhub(hcd); + ports = rhub->ports; + max_ports = rhub->num_ports; bus_state = &xhci->bus_state[hcd_index(hcd)]; /* Initial status is no changes */ @@ -1437,7 +1433,7 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) spin_lock_irqsave(&xhci->lock, flags); /* For each port, did anything change? If so, set that bit in buf. */ for (i = 0; i < max_ports; i++) { - temp = readl(port_array[i]); + temp = readl(ports[i]->addr); if (temp == ~(u32)0) { xhci_hc_died(xhci); retval = -ENODEV; @@ -1469,11 +1465,14 @@ int xhci_bus_suspend(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); int max_ports, port_index; - __le32 __iomem **port_array; struct xhci_bus_state *bus_state; unsigned long flags; + struct xhci_hub *rhub; + struct xhci_port **ports; - max_ports = xhci_get_ports(hcd, &port_array); + rhub = xhci_get_rhub(hcd); + ports = rhub->ports; + max_ports = rhub->num_ports; bus_state = &xhci->bus_state[hcd_index(hcd)]; spin_lock_irqsave(&xhci->lock, flags); @@ -1494,7 +1493,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd) u32 t1, t2; int slot_id; - t1 = readl(port_array[port_index]); + t1 = readl(ports[port_index]->addr); t2 = xhci_port_state_to_neutral(t1); if ((t1 & PORT_PE) && !(t1 & PORT_PLS_MASK)) { @@ -1534,7 +1533,7 @@ int xhci_bus_suspend(struct usb_hcd *hcd) t1 = xhci_port_state_to_neutral(t1); if (t1 != t2) - writel(t2, port_array[port_index]); + writel(t2, ports[port_index]->addr); } hcd->state = HC_STATE_SUSPENDED; bus_state->next_statechange = jiffies + msecs_to_jiffies(10); @@ -1547,12 +1546,11 @@ int xhci_bus_suspend(struct usb_hcd *hcd) * warm reset a USB3 device stuck in polling or compliance mode after resume. * See Intel 100/c230 series PCH specification update Doc #332692-006 Errata #8 */ -static bool xhci_port_missing_cas_quirk(int port_index, - __le32 __iomem **port_array) +static bool xhci_port_missing_cas_quirk(struct xhci_port *port) { u32 portsc; - portsc = readl(port_array[port_index]); + portsc = readl(port->addr); /* if any of these are set we are not stuck */ if (portsc & (PORT_CONNECT | PORT_CAS)) @@ -1565,9 +1563,9 @@ static bool xhci_port_missing_cas_quirk(int port_index, /* clear wakeup/change bits, and do a warm port reset */ portsc &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS); portsc |= PORT_WR; - writel(portsc, port_array[port_index]); + writel(portsc, port->addr); /* flush write */ - readl(port_array[port_index]); + readl(port->addr); return true; } @@ -1575,15 +1573,18 @@ int xhci_bus_resume(struct usb_hcd *hcd) { struct xhci_hcd *xhci = hcd_to_xhci(hcd); struct xhci_bus_state *bus_state; - __le32 __iomem **port_array; unsigned long flags; int max_ports, port_index; int slot_id; int sret; u32 next_state; u32 temp, portsc; + struct xhci_hub *rhub; + struct xhci_port **ports; - max_ports = xhci_get_ports(hcd, &port_array); + rhub = xhci_get_rhub(hcd); + ports = rhub->ports; + max_ports = rhub->num_ports; bus_state = &xhci->bus_state[hcd_index(hcd)]; if (time_before(jiffies, bus_state->next_statechange)) @@ -1608,12 +1609,12 @@ int xhci_bus_resume(struct usb_hcd *hcd) port_index = max_ports; while (port_index--) { - portsc = readl(port_array[port_index]); + portsc = readl(ports[port_index]->addr); /* warm reset CAS limited ports stuck in polling/compliance */ if ((xhci->quirks & XHCI_MISSING_CAS) && (hcd->speed >= HCD_USB3) && - xhci_port_missing_cas_quirk(port_index, port_array)) { + xhci_port_missing_cas_quirk(ports[port_index])) { xhci_dbg(xhci, "reset stuck port %d\n", port_index); clear_bit(port_index, &bus_state->bus_suspended); continue; @@ -1637,7 +1638,7 @@ int xhci_bus_resume(struct usb_hcd *hcd) } /* disable wake for all ports, write new link state if needed */ portsc &= ~(PORT_RWC_BITS | PORT_CEC | PORT_WAKE_BITS); - writel(portsc, port_array[port_index]); + writel(portsc, ports[port_index]->addr); } /* USB2 specific resume signaling delay and U0 link state transition */ @@ -1650,23 +1651,22 @@ int xhci_bus_resume(struct usb_hcd *hcd) for_each_set_bit(port_index, &bus_state->bus_suspended, BITS_PER_LONG) { /* Clear PLC to poll it later for U0 transition */ - xhci_test_and_clear_bit(xhci, port_array, port_index, + xhci_test_and_clear_bit(xhci, ports[port_index], PORT_PLC); - xhci_set_link_state(xhci, port_array, port_index, - XDEV_U0); + xhci_set_link_state(xhci, ports[port_index], XDEV_U0); } } /* poll for U0 link state complete, both USB2 and USB3 */ for_each_set_bit(port_index, &bus_state->bus_suspended, BITS_PER_LONG) { - sret = xhci_handshake(port_array[port_index], PORT_PLC, + sret = xhci_handshake(ports[port_index]->addr, PORT_PLC, PORT_PLC, 10 * 1000); if (sret) { xhci_warn(xhci, "port %d resume PLC timeout\n", port_index); continue; } - xhci_test_and_clear_bit(xhci, port_array, port_index, PORT_PLC); + xhci_test_and_clear_bit(xhci, ports[port_index], PORT_PLC); slot_id = xhci_find_slot_id_by_port(hcd, xhci, port_index + 1); if (slot_id) xhci_ring_device(xhci, slot_id); |