diff options
Diffstat (limited to 'drivers/usb/host/xhci-rcar.c')
| -rw-r--r-- | drivers/usb/host/xhci-rcar.c | 100 |
1 files changed, 56 insertions, 44 deletions
diff --git a/drivers/usb/host/xhci-rcar.c b/drivers/usb/host/xhci-rcar.c index 1cc082a3b793..8a993ee21c87 100644 --- a/drivers/usb/host/xhci-rcar.c +++ b/drivers/usb/host/xhci-rcar.c @@ -11,9 +11,12 @@ #include <linux/platform_device.h> #include <linux/of.h> #include <linux/usb/phy.h> +#include <linux/reset.h> #include "xhci.h" #include "xhci-plat.h" +#include "xhci-rcar-regs.h" +#include "xhci-rzg3e-regs.h" #include "xhci-rzv2m.h" #define XHCI_RCAR_FIRMWARE_NAME_V1 "r8a779x_usb3_v1.dlmem" @@ -29,50 +32,6 @@ MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V1); MODULE_FIRMWARE(XHCI_RCAR_FIRMWARE_NAME_V3); -/*** Register Offset ***/ -#define RCAR_USB3_AXH_STA 0x104 /* AXI Host Control Status */ -#define RCAR_USB3_INT_ENA 0x224 /* Interrupt Enable */ -#define RCAR_USB3_DL_CTRL 0x250 /* FW Download Control & Status */ -#define RCAR_USB3_FW_DATA0 0x258 /* FW Data0 */ - -#define RCAR_USB3_LCLK 0xa44 /* LCLK Select */ -#define RCAR_USB3_CONF1 0xa48 /* USB3.0 Configuration1 */ -#define RCAR_USB3_CONF2 0xa5c /* USB3.0 Configuration2 */ -#define RCAR_USB3_CONF3 0xaa8 /* USB3.0 Configuration3 */ -#define RCAR_USB3_RX_POL 0xab0 /* USB3.0 RX Polarity */ -#define RCAR_USB3_TX_POL 0xab8 /* USB3.0 TX Polarity */ - -/*** Register Settings ***/ -/* AXI Host Control Status */ -#define RCAR_USB3_AXH_STA_B3_PLL_ACTIVE 0x00010000 -#define RCAR_USB3_AXH_STA_B2_PLL_ACTIVE 0x00000001 -#define RCAR_USB3_AXH_STA_PLL_ACTIVE_MASK (RCAR_USB3_AXH_STA_B3_PLL_ACTIVE | \ - RCAR_USB3_AXH_STA_B2_PLL_ACTIVE) - -/* Interrupt Enable */ -#define RCAR_USB3_INT_XHC_ENA 0x00000001 -#define RCAR_USB3_INT_PME_ENA 0x00000002 -#define RCAR_USB3_INT_HSE_ENA 0x00000004 -#define RCAR_USB3_INT_ENA_VAL (RCAR_USB3_INT_XHC_ENA | \ - RCAR_USB3_INT_PME_ENA | RCAR_USB3_INT_HSE_ENA) - -/* FW Download Control & Status */ -#define RCAR_USB3_DL_CTRL_ENABLE 0x00000001 -#define RCAR_USB3_DL_CTRL_FW_SUCCESS 0x00000010 -#define RCAR_USB3_DL_CTRL_FW_SET_DATA0 0x00000100 - -/* LCLK Select */ -#define RCAR_USB3_LCLK_ENA_VAL 0x01030001 - -/* USB3.0 Configuration */ -#define RCAR_USB3_CONF1_VAL 0x00030204 -#define RCAR_USB3_CONF2_VAL 0x00030300 -#define RCAR_USB3_CONF3_VAL 0x13802007 - -/* USB3.0 Polarity */ -#define RCAR_USB3_RX_POL_VAL BIT(21) -#define RCAR_USB3_TX_POL_VAL BIT(4) - static void xhci_rcar_start_gen2(struct usb_hcd *hcd) { /* LCLK Select */ @@ -110,6 +69,48 @@ static void xhci_rcar_start(struct usb_hcd *hcd) } } +static void xhci_rzg3e_start(struct usb_hcd *hcd) +{ + u32 int_en; + + if (hcd->regs) { + /* Update the controller initial setting */ + writel(0x03130200, hcd->regs + RZG3E_USB3_HOST_U3P0PIPESC(0)); + writel(0x00160200, hcd->regs + RZG3E_USB3_HOST_U3P0PIPESC(1)); + writel(0x03150000, hcd->regs + RZG3E_USB3_HOST_U3P0PIPESC(2)); + writel(0x03130200, hcd->regs + RZG3E_USB3_HOST_U3P0PIPESC(3)); + writel(0x00180000, hcd->regs + RZG3E_USB3_HOST_U3P0PIPESC(4)); + + /* Interrupt Enable */ + int_en = readl(hcd->regs + RZG3E_USB3_HOST_INTEN); + int_en |= RZG3E_USB3_HOST_INTEN_ENA; + writel(int_en, hcd->regs + RZG3E_USB3_HOST_INTEN); + } +} + +static int xhci_rzg3e_resume(struct usb_hcd *hcd) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + + return reset_control_deassert(xhci->reset); +} + +static int xhci_rzg3e_post_resume(struct usb_hcd *hcd) +{ + xhci_rzg3e_start(hcd); + + return 0; +} + +static int xhci_rzg3e_suspend(struct usb_hcd *hcd) +{ + struct xhci_hcd *xhci = hcd_to_xhci(hcd); + + reset_control_assert(xhci->reset); + + return 0; +} + static int xhci_rcar_download_firmware(struct usb_hcd *hcd) { struct device *dev = hcd->self.controller; @@ -233,6 +234,14 @@ static const struct xhci_plat_priv xhci_plat_renesas_rzv2m = { .plat_start = xhci_rzv2m_start, }; +static const struct xhci_plat_priv xhci_plat_renesas_rzg3e = { + .quirks = XHCI_NO_64BIT_SUPPORT | XHCI_RESET_ON_RESUME | XHCI_SUSPEND_RESUME_CLKS, + .plat_start = xhci_rzg3e_start, + .suspend_quirk = xhci_rzg3e_suspend, + .resume_quirk = xhci_rzg3e_resume, + .post_resume_quirk = xhci_rzg3e_post_resume, +}; + static const struct of_device_id usb_xhci_of_match[] = { { .compatible = "renesas,xhci-r8a7790", @@ -250,6 +259,9 @@ static const struct of_device_id usb_xhci_of_match[] = { .compatible = "renesas,xhci-r8a7796", .data = &xhci_plat_renesas_rcar_gen3, }, { + .compatible = "renesas,r9a09g047-xhci", + .data = &xhci_plat_renesas_rzg3e, + }, { .compatible = "renesas,rcar-gen2-xhci", .data = &xhci_plat_renesas_rcar_gen2, }, { |