diff options
Diffstat (limited to 'include/linux/firmware')
| -rw-r--r-- | include/linux/firmware/intel/stratix10-smc.h | 111 | ||||
| -rw-r--r-- | include/linux/firmware/intel/stratix10-svc-client.h | 104 | ||||
| -rw-r--r-- | include/linux/firmware/samsung/exynos-acpm-protocol.h | 19 | ||||
| -rw-r--r-- | include/linux/firmware/xlnx-zynqmp-ufs.h | 38 | ||||
| -rw-r--r-- | include/linux/firmware/xlnx-zynqmp.h | 16 |
5 files changed, 288 insertions, 0 deletions
diff --git a/include/linux/firmware/intel/stratix10-smc.h b/include/linux/firmware/intel/stratix10-smc.h index ee80ca4bb0d0..935dba3633b5 100644 --- a/include/linux/firmware/intel/stratix10-smc.h +++ b/include/linux/firmware/intel/stratix10-smc.h @@ -1,6 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (C) 2017-2018, Intel Corporation + * Copyright (C) 2025, Altera Corporation */ #ifndef __STRATIX10_SMC_H @@ -47,6 +48,10 @@ ARM_SMCCC_CALL_VAL(ARM_SMCCC_FAST_CALL, ARM_SMCCC_SMC_64, \ ARM_SMCCC_OWNER_SIP, (func_num)) +#define INTEL_SIP_SMC_ASYNC_VAL(func_name) \ + ARM_SMCCC_CALL_VAL(ARM_SMCCC_STD_CALL, ARM_SMCCC_SMC_64, \ + ARM_SMCCC_OWNER_SIP, (func_name)) + /** * Return values in INTEL_SIP_SMC_* call * @@ -620,4 +625,110 @@ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE) #define INTEL_SIP_SMC_FCS_GET_PROVISION_DATA \ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FCS_GET_PROVISION_DATA) +/** + * Request INTEL_SIP_SMC_HWMON_READTEMP + * Sync call to request temperature + * + * Call register usage: + * a0 Temperature Channel + * a1-a7 not used + * + * Return status + * a0 INTEL_SIP_SMC_STATUS_OK + * a1 Temperature Value + * a2-a3 not used + */ +#define INTEL_SIP_SMC_FUNCID_HWMON_READTEMP 32 +#define INTEL_SIP_SMC_HWMON_READTEMP \ + INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_HWMON_READTEMP) + +/** + * Request INTEL_SIP_SMC_HWMON_READVOLT + * Sync call to request voltage + * + * Call register usage: + * a0 Voltage Channel + * a1-a7 not used + * + * Return status + * a0 INTEL_SIP_SMC_STATUS_OK + * a1 Voltage Value + * a2-a3 not used + */ +#define INTEL_SIP_SMC_FUNCID_HWMON_READVOLT 33 +#define INTEL_SIP_SMC_HWMON_READVOLT \ + INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_HWMON_READVOLT) + +/** + * Request INTEL_SIP_SMC_ASYNC_POLL + * Async call used by service driver at EL1 to query mailbox response from SDM. + * + * Call register usage: + * a0 INTEL_SIP_SMC_ASYNC_POLL + * a1 transaction job id + * a2-17 will be used to return the response data + * + * Return status + * a0 INTEL_SIP_SMC_STATUS_OK + * a1-17 will contain the response values from mailbox for the previous send + * transaction + * Or + * a0 INTEL_SIP_SMC_STATUS_NO_RESPONSE + * a1-17 not used + */ +#define INTEL_SIP_SMC_ASYNC_FUNC_ID_POLL (0xC8) +#define INTEL_SIP_SMC_ASYNC_POLL \ + INTEL_SIP_SMC_ASYNC_VAL(INTEL_SIP_SMC_ASYNC_FUNC_ID_POLL) + +/** + * Request INTEL_SIP_SMC_ASYNC_RSU_GET_SPT + * Async call to get RSU SPT from SDM. + * Call register usage: + * a0 INTEL_SIP_SMC_ASYNC_RSU_GET_SPT + * a1 transaction job id + * a2-a17 not used + * + * Return status: + * a0 INTEL_SIP_SMC_STATUS_OK ,INTEL_SIP_SMC_STATUS_REJECTED + * or INTEL_SIP_SMC_STATUS_BUSY + * a1-a17 not used + */ +#define INTEL_SIP_SMC_ASYNC_FUNC_ID_RSU_GET_SPT (0xEA) +#define INTEL_SIP_SMC_ASYNC_RSU_GET_SPT \ + INTEL_SIP_SMC_ASYNC_VAL(INTEL_SIP_SMC_ASYNC_FUNC_ID_RSU_GET_SPT) + +/** + * Request INTEL_SIP_SMC_ASYNC_RSU_GET_ERROR_STATUS + * Async call to get RSU error status from SDM. + * Call register usage: + * a0 INTEL_SIP_SMC_ASYNC_RSU_GET_ERROR_STATUS + * a1 transaction job id + * a2-a17 not used + * + * Return status: + * a0 INTEL_SIP_SMC_STATUS_OK ,INTEL_SIP_SMC_STATUS_REJECTED + * or INTEL_SIP_SMC_STATUS_BUSY + * a1-a17 not used + */ +#define INTEL_SIP_SMC_ASYNC_FUNC_ID_RSU_GET_ERROR_STATUS (0xEB) +#define INTEL_SIP_SMC_ASYNC_RSU_GET_ERROR_STATUS \ + INTEL_SIP_SMC_ASYNC_VAL(INTEL_SIP_SMC_ASYNC_FUNC_ID_RSU_GET_ERROR_STATUS) + +/** + * Request INTEL_SIP_SMC_ASYNC_RSU_NOTIFY + * Async call to send NOTIFY value to SDM. + * Call register usage: + * a0 INTEL_SIP_SMC_ASYNC_RSU_NOTIFY + * a1 transaction job id + * a2 notify value + * a3-a17 not used + * + * Return status: + * a0 INTEL_SIP_SMC_STATUS_OK ,INTEL_SIP_SMC_STATUS_REJECTED + * or INTEL_SIP_SMC_STATUS_BUSY + * a1-a17 not used + */ +#define INTEL_SIP_SMC_ASYNC_FUNC_ID_RSU_NOTIFY (0xEC) +#define INTEL_SIP_SMC_ASYNC_RSU_NOTIFY \ + INTEL_SIP_SMC_ASYNC_VAL(INTEL_SIP_SMC_ASYNC_FUNC_ID_RSU_NOTIFY) #endif diff --git a/include/linux/firmware/intel/stratix10-svc-client.h b/include/linux/firmware/intel/stratix10-svc-client.h index 60ed82112680..d290060f4c73 100644 --- a/include/linux/firmware/intel/stratix10-svc-client.h +++ b/include/linux/firmware/intel/stratix10-svc-client.h @@ -1,6 +1,7 @@ /* SPDX-License-Identifier: GPL-2.0 */ /* * Copyright (C) 2017-2018, Intel Corporation + * Copyright (C) 2025, Altera Corporation */ #ifndef __STRATIX10_SVC_CLIENT_H @@ -11,10 +12,12 @@ * * fpga: for FPGA configuration * rsu: for remote status update + * hwmon: for hardware monitoring (voltage and temperature) */ #define SVC_CLIENT_FPGA "fpga" #define SVC_CLIENT_RSU "rsu" #define SVC_CLIENT_FCS "fcs" +#define SVC_CLIENT_HWMON "hwmon" /* * Status of the sent command, in bit number @@ -70,6 +73,7 @@ #define SVC_RSU_REQUEST_TIMEOUT_MS 300 #define SVC_FCS_REQUEST_TIMEOUT_MS 2000 #define SVC_COMPLETED_TIMEOUT_MS 30000 +#define SVC_HWMON_REQUEST_TIMEOUT_MS 300 struct stratix10_svc_chan; @@ -124,6 +128,9 @@ struct stratix10_svc_chan; * @COMMAND_RSU_DCMF_STATUS: query firmware for the DCMF status * return status is SVC_STATUS_OK or SVC_STATUS_ERROR * + * @COMMAND_RSU_GET_SPT_TABLE: query firmware for SPT table + * return status is SVC_STATUS_OK or SVC_STATUS_ERROR + * * @COMMAND_FCS_REQUEST_SERVICE: request validation of image from firmware, * return status is SVC_STATUS_OK, SVC_STATUS_INVALID_PARAM * @@ -141,6 +148,12 @@ struct stratix10_svc_chan; * * @COMMAND_FCS_RANDOM_NUMBER_GEN: generate a random number, return status * is SVC_STATUS_OK, SVC_STATUS_ERROR + * + * @COMMAND_HWMON_READTEMP: query the temperature from the hardware monitor, + * return status is SVC_STATUS_OK or SVC_STATUS_ERROR + * + * @COMMAND_HWMON_READVOLT: query the voltage from the hardware monitor, + * return status is SVC_STATUS_OK or SVC_STATUS_ERROR */ enum stratix10_svc_command_code { /* for FPGA */ @@ -158,6 +171,7 @@ enum stratix10_svc_command_code { COMMAND_RSU_DCMF_VERSION, COMMAND_RSU_DCMF_STATUS, COMMAND_FIRMWARE_VERSION, + COMMAND_RSU_GET_SPT_TABLE, /* for FCS */ COMMAND_FCS_REQUEST_SERVICE = 20, COMMAND_FCS_SEND_CERTIFICATE, @@ -171,6 +185,9 @@ enum stratix10_svc_command_code { COMMAND_MBOX_SEND_CMD = 100, /* Non-mailbox SMC Call */ COMMAND_SMC_SVC_VERSION = 200, + /* for HWMON */ + COMMAND_HWMON_READTEMP, + COMMAND_HWMON_READVOLT }; /** @@ -284,5 +301,92 @@ int stratix10_svc_send(struct stratix10_svc_chan *chan, void *msg); * request process. */ void stratix10_svc_done(struct stratix10_svc_chan *chan); + +/** + * typedef async_callback_t - A type definition for an asynchronous callback function. + * + * This type defines a function pointer for an asynchronous callback. + * The callback function takes a single argument, which is a pointer to + * user-defined data. + * + * @cb_arg: Argument to be passed to the callback function. + */ +typedef void (*async_callback_t)(void *cb_arg); + +/** + * stratix10_svc_add_async_client - Add an asynchronous client to a Stratix 10 + * service channel. + * @chan: Pointer to the Stratix 10 service channel structure. + * @use_unique_clientid: Boolean flag indicating whether to use a unique client ID. + * + * This function registers an asynchronous client with the specified Stratix 10 + * service channel. If the use_unique_clientid flag is set to true, a unique client + * ID will be assigned to the client. + * + * Return: 0 on success, or a negative error code on failure: + * -EINVAL if the channel is NULL or the async controller is not initialized. + * -EALREADY if the async channel is already allocated. + * -ENOMEM if memory allocation fails. + * Other negative values if ID allocation fails + */ +int stratix10_svc_add_async_client(struct stratix10_svc_chan *chan, bool use_unique_clientid); + +/** + * stratix10_svc_remove_async_client - Remove an asynchronous client from the Stratix 10 + * service channel. + * @chan: Pointer to the Stratix 10 service channel structure. + * + * This function removes an asynchronous client from the specified Stratix 10 service channel. + * It is typically used to clean up and release resources associated with the client. + * + * Return: 0 on success, -EINVAL if the channel or asynchronous channel is invalid. + */ +int stratix10_svc_remove_async_client(struct stratix10_svc_chan *chan); + +/** + * stratix10_svc_async_send - Send an asynchronous message to the SDM mailbox + * in EL3 secure firmware. + * @chan: Pointer to the service channel structure. + * @msg: Pointer to the message to be sent. + * @handler: Pointer to the handler object used by caller to track the transaction. + * @cb: Callback function to be called upon completion. + * @cb_arg: Argument to be passed to the callback function. + * + * This function sends a message asynchronously to the SDM mailbox in EL3 secure firmware. + * and registers a callback function to be invoked when the operation completes. + * + * Return: 0 on success,and negative error codes on failure. + */ +int stratix10_svc_async_send(struct stratix10_svc_chan *chan, void *msg, void **handler, + async_callback_t cb, void *cb_arg); + +/** + * stratix10_svc_async_poll - Polls the status of an asynchronous service request. + * @chan: Pointer to the service channel structure. + * @tx_handle: Handle to the transaction being polled. + * @data: Pointer to the callback data structure to be filled with the result. + * + * This function checks the status of an asynchronous service request + * and fills the provided callback data structure with the result. + * + * Return: 0 on success, -EINVAL if any input parameter is invalid or if the + * async controller is not initialized, -EAGAIN if the transaction is + * still in progress, or other negative error codes on failure. + */ +int stratix10_svc_async_poll(struct stratix10_svc_chan *chan, void *tx_handle, + struct stratix10_svc_cb_data *data); + +/** + * stratix10_svc_async_done - Complete an asynchronous transaction + * @chan: Pointer to the service channel structure + * @tx_handle: Pointer to the transaction handle + * + * This function completes an asynchronous transaction by removing the + * transaction from the hash table and deallocating the associated resources. + * + * Return: 0 on success, -EINVAL on invalid input or errors. + */ +int stratix10_svc_async_done(struct stratix10_svc_chan *chan, void *tx_handle); + #endif diff --git a/include/linux/firmware/samsung/exynos-acpm-protocol.h b/include/linux/firmware/samsung/exynos-acpm-protocol.h index f628bf1862c2..2091da965a5a 100644 --- a/include/linux/firmware/samsung/exynos-acpm-protocol.h +++ b/include/linux/firmware/samsung/exynos-acpm-protocol.h @@ -13,6 +13,15 @@ struct acpm_handle; struct device_node; +struct acpm_dvfs_ops { + int (*set_rate)(const struct acpm_handle *handle, + unsigned int acpm_chan_id, unsigned int clk_id, + unsigned long rate); + unsigned long (*get_rate)(const struct acpm_handle *handle, + unsigned int acpm_chan_id, + unsigned int clk_id); +}; + struct acpm_pmic_ops { int (*read_reg)(const struct acpm_handle *handle, unsigned int acpm_chan_id, u8 type, u8 reg, u8 chan, @@ -32,6 +41,7 @@ struct acpm_pmic_ops { }; struct acpm_ops { + struct acpm_dvfs_ops dvfs_ops; struct acpm_pmic_ops pmic_ops; }; @@ -45,7 +55,16 @@ struct acpm_handle { struct device; +#if IS_ENABLED(CONFIG_EXYNOS_ACPM_PROTOCOL) const struct acpm_handle *devm_acpm_get_by_node(struct device *dev, struct device_node *np); +#else + +static inline const struct acpm_handle *devm_acpm_get_by_node(struct device *dev, + struct device_node *np) +{ + return NULL; +} +#endif #endif /* __EXYNOS_ACPM_PROTOCOL_H */ diff --git a/include/linux/firmware/xlnx-zynqmp-ufs.h b/include/linux/firmware/xlnx-zynqmp-ufs.h new file mode 100644 index 000000000000..d3538dd5822a --- /dev/null +++ b/include/linux/firmware/xlnx-zynqmp-ufs.h @@ -0,0 +1,38 @@ +/* SPDX-License-Identifier: GPL-2.0 */ +/* + * Firmware layer for UFS APIs. + * + * Copyright (c) 2025 Advanced Micro Devices, Inc. + */ + +#ifndef __FIRMWARE_XLNX_ZYNQMP_UFS_H__ +#define __FIRMWARE_XLNX_ZYNQMP_UFS_H__ + +#if IS_REACHABLE(CONFIG_ZYNQMP_FIRMWARE) +int zynqmp_pm_is_mphy_tx_rx_config_ready(bool *is_ready); +int zynqmp_pm_is_sram_init_done(bool *is_done); +int zynqmp_pm_set_sram_bypass(void); +int zynqmp_pm_get_ufs_calibration_values(u32 *val); +#else +static inline int zynqmp_pm_is_mphy_tx_rx_config_ready(bool *is_ready) +{ + return -ENODEV; +} + +static inline int zynqmp_pm_is_sram_init_done(bool *is_done) +{ + return -ENODEV; +} + +static inline int zynqmp_pm_set_sram_bypass(void) +{ + return -ENODEV; +} + +static inline int zynqmp_pm_get_ufs_calibration_values(u32 *val) +{ + return -ENODEV; +} +#endif + +#endif /* __FIRMWARE_XLNX_ZYNQMP_UFS_H__ */ diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h index be6817ac5120..15fdbd089bbf 100644 --- a/include/linux/firmware/xlnx-zynqmp.h +++ b/include/linux/firmware/xlnx-zynqmp.h @@ -16,6 +16,7 @@ #include <linux/types.h> #include <linux/err.h> +#include <linux/firmware/xlnx-zynqmp-ufs.h> #define ZYNQMP_PM_VERSION_MAJOR 1 #define ZYNQMP_PM_VERSION_MINOR 0 @@ -236,6 +237,7 @@ enum pm_ioctl_id { IOCTL_GET_FEATURE_CONFIG = 27, /* IOCTL for Secure Read/Write Interface */ IOCTL_READ_REG = 28, + IOCTL_MASK_WRITE_REG = 29, /* Dynamic SD/GEM configuration */ IOCTL_SET_SD_CONFIG = 30, IOCTL_SET_GEM_CONFIG = 31, @@ -614,6 +616,9 @@ int zynqmp_pm_feature(const u32 api_id); int zynqmp_pm_is_function_supported(const u32 api_id, const u32 id); int zynqmp_pm_set_feature_config(enum pm_feature_config_id id, u32 value); int zynqmp_pm_get_feature_config(enum pm_feature_config_id id, u32 *payload); +int zynqmp_pm_sec_read_reg(u32 node_id, u32 offset, u32 *ret_value); +int zynqmp_pm_sec_mask_write_reg(const u32 node_id, const u32 offset, + u32 mask, u32 value); int zynqmp_pm_register_sgi(u32 sgi_num, u32 reset); int zynqmp_pm_force_pwrdwn(const u32 target, const enum zynqmp_pm_request_ack ack); @@ -913,6 +918,17 @@ static inline int zynqmp_pm_request_wake(const u32 node, return -ENODEV; } +static inline int zynqmp_pm_sec_read_reg(u32 node_id, u32 offset, u32 *ret_value) +{ + return -ENODEV; +} + +static inline int zynqmp_pm_sec_mask_write_reg(const u32 node_id, const u32 offset, + u32 mask, u32 value) +{ + return -ENODEV; +} + static inline int zynqmp_pm_get_rpu_mode(u32 node_id, enum rpu_oper_mode *rpu_mode) { return -ENODEV; |