diff options
Diffstat (limited to 'include/linux/gpio/driver.h')
| -rw-r--r-- | include/linux/gpio/driver.h | 105 |
1 files changed, 48 insertions, 57 deletions
diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h index 667f8fd58a79..fabe2baf7b50 100644 --- a/include/linux/gpio/driver.h +++ b/include/linux/gpio/driver.h @@ -388,28 +388,6 @@ struct gpio_irq_chip { * implies that if the chip supports IRQs, these IRQs need to be threaded * as the chip access may sleep when e.g. reading out the IRQ status * registers. - * @read_reg: reader function for generic GPIO - * @write_reg: writer function for generic GPIO - * @be_bits: if the generic GPIO has big endian bit order (bit 31 is representing - * line 0, bit 30 is line 1 ... bit 0 is line 31) this is set to true by the - * generic GPIO core. It is for internal housekeeping only. - * @reg_dat: data (in) register for generic GPIO - * @reg_set: output set register (out=high) for generic GPIO - * @reg_clr: output clear register (out=low) for generic GPIO - * @reg_dir_out: direction out setting register for generic GPIO - * @reg_dir_in: direction in setting register for generic GPIO - * @bgpio_dir_unreadable: indicates that the direction register(s) cannot - * be read and we need to rely on out internal state tracking. - * @bgpio_pinctrl: the generic GPIO uses a pin control backend. - * @bgpio_bits: number of register bits used for a generic GPIO i.e. - * <register width> * 8 - * @bgpio_lock: used to lock chip->bgpio_data. Also, this is needed to keep - * shadowed and real data registers writes together. - * @bgpio_data: shadowed data register for generic GPIO to clear/set bits - * safely. - * @bgpio_dir: shadowed direction register for generic GPIO to clear/set - * direction safely. A "1" in this word means the line is set as - * output. * * A gpio_chip can help platforms abstract various sources of GPIOs so * they can all be accessed through a common programming interface. @@ -475,23 +453,6 @@ struct gpio_chip { const char *const *names; bool can_sleep; -#if IS_ENABLED(CONFIG_GPIO_GENERIC) - unsigned long (*read_reg)(void __iomem *reg); - void (*write_reg)(void __iomem *reg, unsigned long data); - bool be_bits; - void __iomem *reg_dat; - void __iomem *reg_set; - void __iomem *reg_clr; - void __iomem *reg_dir_out; - void __iomem *reg_dir_in; - bool bgpio_dir_unreadable; - bool bgpio_pinctrl; - int bgpio_bits; - raw_spinlock_t bgpio_lock; - unsigned long bgpio_data; - unsigned long bgpio_dir; -#endif /* CONFIG_GPIO_GENERIC */ - #ifdef CONFIG_GPIOLIB_IRQCHIP /* * With CONFIG_GPIOLIB_IRQCHIP we get an irqchip inside the gpiolib @@ -723,21 +684,6 @@ int gpiochip_populate_parent_fwspec_fourcell(struct gpio_chip *gc, #endif /* CONFIG_IRQ_DOMAIN_HIERARCHY */ -int bgpio_init(struct gpio_chip *gc, struct device *dev, - unsigned long sz, void __iomem *dat, void __iomem *set, - void __iomem *clr, void __iomem *dirout, void __iomem *dirin, - unsigned long flags); - -#define BGPIOF_BIG_ENDIAN BIT(0) -#define BGPIOF_UNREADABLE_REG_SET BIT(1) /* reg_set is unreadable */ -#define BGPIOF_UNREADABLE_REG_DIR BIT(2) /* reg_dir is unreadable */ -#define BGPIOF_BIG_ENDIAN_BYTE_ORDER BIT(3) -#define BGPIOF_READ_OUTPUT_REG_SET BIT(4) /* reg_set stores output value */ -#define BGPIOF_NO_OUTPUT BIT(5) /* only input */ -#define BGPIOF_NO_SET_ON_INPUT BIT(6) -#define BGPIOF_PINCTRL_BACKEND BIT(7) /* Call pinctrl direction setters */ -#define BGPIOF_NO_INPUT BIT(8) /* only output */ - #ifdef CONFIG_GPIOLIB_IRQCHIP int gpiochip_irqchip_add_domain(struct gpio_chip *gc, struct irq_domain *domain); @@ -772,23 +718,68 @@ struct gpio_pin_range { #ifdef CONFIG_PINCTRL -int gpiochip_add_pin_range(struct gpio_chip *gc, const char *pinctl_name, - unsigned int gpio_offset, unsigned int pin_offset, - unsigned int npins); +int gpiochip_add_pin_range_with_pins(struct gpio_chip *gc, + const char *pinctl_name, + unsigned int gpio_offset, + unsigned int pin_offset, + unsigned int const *pins, + unsigned int npins); int gpiochip_add_pingroup_range(struct gpio_chip *gc, struct pinctrl_dev *pctldev, unsigned int gpio_offset, const char *pin_group); void gpiochip_remove_pin_ranges(struct gpio_chip *gc); +static inline int +gpiochip_add_pin_range(struct gpio_chip *gc, + const char *pinctl_name, + unsigned int gpio_offset, + unsigned int pin_offset, + unsigned int npins) +{ + return gpiochip_add_pin_range_with_pins(gc, pinctl_name, gpio_offset, + pin_offset, NULL, npins); +} + +static inline int +gpiochip_add_sparse_pin_range(struct gpio_chip *gc, + const char *pinctl_name, + unsigned int gpio_offset, + unsigned int const *pins, + unsigned int npins) +{ + return gpiochip_add_pin_range_with_pins(gc, pinctl_name, gpio_offset, 0, + pins, npins); +} #else /* ! CONFIG_PINCTRL */ static inline int +gpiochip_add_pin_range_with_pins(struct gpio_chip *gc, + const char *pinctl_name, + unsigned int gpio_offset, + unsigned int pin_offset, + unsigned int npins) +{ + return 0; +} + +static inline int gpiochip_add_pin_range(struct gpio_chip *gc, const char *pinctl_name, unsigned int gpio_offset, unsigned int pin_offset, unsigned int npins) { return 0; } + +static inline int +gpiochip_add_sparse_pin_range(struct gpio_chip *gc, + const char *pinctl_name, + unsigned int gpio_offset, + unsigned int const *pins, + unsigned int npins) +{ + return 0; +} + static inline int gpiochip_add_pingroup_range(struct gpio_chip *gc, struct pinctrl_dev *pctldev, |