diff options
Diffstat (limited to 'include/linux/serial_core.h')
| -rw-r--r-- | include/linux/serial_core.h | 85 |
1 files changed, 62 insertions, 23 deletions
diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index cf3a1e789bf5..057038cf2788 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -63,7 +63,7 @@ struct uart_ops { void (*flush_buffer)(struct uart_port *); void (*set_termios)(struct uart_port *, struct ktermios *new, struct ktermios *old); - void (*set_ldisc)(struct uart_port *, int new); + void (*set_ldisc)(struct uart_port *, struct ktermios *); void (*pm)(struct uart_port *, unsigned int state, unsigned int oldstate); @@ -112,6 +112,7 @@ struct uart_icount { }; typedef unsigned int __bitwise__ upf_t; +typedef unsigned int __bitwise__ upstat_t; struct uart_port { spinlock_t lock; /* port lock */ @@ -122,10 +123,16 @@ struct uart_port { void (*set_termios)(struct uart_port *, struct ktermios *new, struct ktermios *old); + int (*startup)(struct uart_port *port); + void (*shutdown)(struct uart_port *port); + void (*throttle)(struct uart_port *port); + void (*unthrottle)(struct uart_port *port); int (*handle_irq)(struct uart_port *); void (*pm)(struct uart_port *, unsigned int state, unsigned int old); void (*handle_break)(struct uart_port *); + int (*rs485_config)(struct uart_port *, + struct serial_rs485 *rs485); unsigned int irq; /* irq number */ unsigned long irqflags; /* irq flags */ unsigned int uartclk; /* base uart clock */ @@ -135,12 +142,13 @@ struct uart_port { unsigned char iotype; /* io access style */ unsigned char unused1; -#define UPIO_PORT (0) -#define UPIO_HUB6 (1) -#define UPIO_MEM (2) -#define UPIO_MEM32 (3) -#define UPIO_AU (4) /* Au1x00 and RT288x type IO */ -#define UPIO_TSI (5) /* Tsi108/109 type IO */ +#define UPIO_PORT (0) /* 8b I/O port access */ +#define UPIO_HUB6 (1) /* Hub6 ISA card */ +#define UPIO_MEM (2) /* 8b MMIO access */ +#define UPIO_MEM32 (3) /* 32b little endian */ +#define UPIO_MEM32BE (4) /* 32b big endian */ +#define UPIO_AU (5) /* Au1x00 and RT288x type IO */ +#define UPIO_TSI (6) /* Tsi108/109 type IO */ unsigned int read_status_mask; /* driver specific */ unsigned int ignore_status_mask; /* driver specific */ @@ -152,23 +160,36 @@ struct uart_port { unsigned long sysrq; /* sysrq timeout */ #endif + /* flags must be updated while holding port mutex */ upf_t flags; -#define UPF_FOURPORT ((__force upf_t) (1 << 1)) -#define UPF_SAK ((__force upf_t) (1 << 2)) -#define UPF_SPD_MASK ((__force upf_t) (0x1030)) -#define UPF_SPD_HI ((__force upf_t) (0x0010)) -#define UPF_SPD_VHI ((__force upf_t) (0x0020)) -#define UPF_SPD_CUST ((__force upf_t) (0x0030)) -#define UPF_SPD_SHI ((__force upf_t) (0x1000)) -#define UPF_SPD_WARP ((__force upf_t) (0x1010)) -#define UPF_SKIP_TEST ((__force upf_t) (1 << 6)) -#define UPF_AUTO_IRQ ((__force upf_t) (1 << 7)) -#define UPF_HARDPPS_CD ((__force upf_t) (1 << 11)) -#define UPF_LOW_LATENCY ((__force upf_t) (1 << 13)) -#define UPF_BUGGY_UART ((__force upf_t) (1 << 14)) + /* + * These flags must be equivalent to the flags defined in + * include/uapi/linux/tty_flags.h which are the userspace definitions + * assigned from the serial_struct flags in uart_set_info() + * [for bit definitions in the UPF_CHANGE_MASK] + * + * Bits [0..UPF_LAST_USER] are userspace defined/visible/changeable + * except bit 15 (UPF_NO_TXEN_TEST) which is masked off. + * The remaining bits are serial-core specific and not modifiable by + * userspace. + */ +#define UPF_FOURPORT ((__force upf_t) ASYNC_FOURPORT /* 1 */ ) +#define UPF_SAK ((__force upf_t) ASYNC_SAK /* 2 */ ) +#define UPF_SPD_HI ((__force upf_t) ASYNC_SPD_HI /* 4 */ ) +#define UPF_SPD_VHI ((__force upf_t) ASYNC_SPD_VHI /* 5 */ ) +#define UPF_SPD_CUST ((__force upf_t) ASYNC_SPD_CUST /* 0x0030 */ ) +#define UPF_SPD_WARP ((__force upf_t) ASYNC_SPD_WARP /* 0x1010 */ ) +#define UPF_SPD_MASK ((__force upf_t) ASYNC_SPD_MASK /* 0x1030 */ ) +#define UPF_SKIP_TEST ((__force upf_t) ASYNC_SKIP_TEST /* 6 */ ) +#define UPF_AUTO_IRQ ((__force upf_t) ASYNC_AUTO_IRQ /* 7 */ ) +#define UPF_HARDPPS_CD ((__force upf_t) ASYNC_HARDPPS_CD /* 11 */ ) +#define UPF_SPD_SHI ((__force upf_t) ASYNC_SPD_SHI /* 12 */ ) +#define UPF_LOW_LATENCY ((__force upf_t) ASYNC_LOW_LATENCY /* 13 */ ) +#define UPF_BUGGY_UART ((__force upf_t) ASYNC_BUGGY_UART /* 14 */ ) #define UPF_NO_TXEN_TEST ((__force upf_t) (1 << 15)) -#define UPF_MAGIC_MULTIPLIER ((__force upf_t) (1 << 16)) +#define UPF_MAGIC_MULTIPLIER ((__force upf_t) ASYNC_MAGIC_MULTIPLIER /* 16 */ ) + /* Port has hardware-assisted h/w flow control (iow, auto-RTS *not* auto-CTS) */ #define UPF_HARD_FLOW ((__force upf_t) (1 << 21)) /* Port has hardware-assisted s/w flow control */ @@ -184,9 +205,21 @@ struct uart_port { #define UPF_DEAD ((__force upf_t) (1 << 30)) #define UPF_IOREMAP ((__force upf_t) (1 << 31)) -#define UPF_CHANGE_MASK ((__force upf_t) (0x17fff)) +#define __UPF_CHANGE_MASK 0x17fff +#define UPF_CHANGE_MASK ((__force upf_t) __UPF_CHANGE_MASK) #define UPF_USR_MASK ((__force upf_t) (UPF_SPD_MASK|UPF_LOW_LATENCY)) +#if __UPF_CHANGE_MASK > ASYNC_FLAGS +#error Change mask not equivalent to userspace-visible bit defines +#endif + + /* status must be updated while holding port lock */ + upstat_t status; + +#define UPSTAT_CTS_ENABLE ((__force upstat_t) (1 << 0)) +#define UPSTAT_DCD_ENABLE ((__force upstat_t) (1 << 1)) + + int hw_stopped; /* sw-assisted CTS flow state */ unsigned int mctrl; /* current modem ctrl settings */ unsigned int timeout; /* character-based timeout */ unsigned int type; /* port type */ @@ -201,6 +234,7 @@ struct uart_port { unsigned char unused[2]; struct attribute_group *attr_group; /* port specific attributes */ const struct attribute_group **tty_groups; /* all attributes (serial core use only) */ + struct serial_rs485 rs485; void *private_data; /* generic platform data pointer */ }; @@ -347,11 +381,16 @@ int uart_resume_port(struct uart_driver *reg, struct uart_port *port); static inline int uart_tx_stopped(struct uart_port *port) { struct tty_struct *tty = port->state->port.tty; - if(tty->stopped || tty->hw_stopped) + if (tty->stopped || port->hw_stopped) return 1; return 0; } +static inline bool uart_cts_enabled(struct uart_port *uport) +{ + return !!(uport->status & UPSTAT_CTS_ENABLE); +} + /* * The following are helper functions for the low level drivers. */ |