diff options
Diffstat (limited to 'include/uapi/linux/nl80211.h')
| -rw-r--r-- | include/uapi/linux/nl80211.h | 255 |
1 files changed, 250 insertions, 5 deletions
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h index d1a14f2892d9..8134f10e4e6c 100644 --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h @@ -1085,8 +1085,9 @@ * %NL80211_ATTR_NAN_MASTER_PREF attribute and optional * %NL80211_ATTR_BANDS attributes. If %NL80211_ATTR_BANDS is * omitted or set to 0, it means don't-care and the device will - * decide what to use. After this command NAN functions can be - * added. + * decide what to use. Additional cluster configuration may be + * optionally provided with %NL80211_ATTR_NAN_CONFIG. + * After this command NAN functions can be added. * @NL80211_CMD_STOP_NAN: Stop the NAN operation, identified by * its %NL80211_ATTR_WDEV interface. * @NL80211_CMD_ADD_NAN_FUNCTION: Add a NAN function. The function is defined @@ -1115,6 +1116,10 @@ * current configuration is not changed. If it is present but * set to zero, the configuration is changed to don't-care * (i.e. the device can decide what to do). + * Additional parameters may be provided with + * %NL80211_ATTR_NAN_CONFIG. User space should provide all previously + * configured nested attributes under %NL80211_ATTR_NAN_CONFIG, even if + * only a subset was changed. * @NL80211_CMD_NAN_MATCH: Notification sent when a match is reported. * This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and * %NL80211_ATTR_COOKIE. @@ -1344,6 +1349,18 @@ * control EPCS configuration. Used to notify userland on the current state * of EPCS. * + * @NL80211_CMD_NAN_NEXT_DW_NOTIFICATION: This command is used to notify + * user space about the next NAN Discovery Window (DW). User space may use + * it to prepare frames to be sent in the next DW. + * %NL80211_ATTR_WIPHY_FREQ is used to indicate the frequency of the next + * DW. SDF transmission should be requested with %NL80211_CMD_FRAME and + * the device/driver shall take care of the actual transmission timing. + * This notification is only sent to the NAN interface owning socket + * (see %NL80211_ATTR_SOCKET_OWNER flag). + * @NL80211_CMD_NAN_CLUSTER_JOINED: This command is used to notify + * user space that the NAN new cluster has been joined. The cluster ID is + * indicated by %NL80211_ATTR_MAC. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ @@ -1604,6 +1621,9 @@ enum nl80211_commands { NL80211_CMD_ASSOC_MLO_RECONF, NL80211_CMD_EPCS_CFG, + NL80211_CMD_NAN_NEXT_DW_NOTIFICATION, + NL80211_CMD_NAN_CLUSTER_JOINED, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ @@ -1943,8 +1963,9 @@ enum nl80211_commands { * The driver must also specify support for this with the extended * features NL80211_EXT_FEATURE_BEACON_RATE_LEGACY, * NL80211_EXT_FEATURE_BEACON_RATE_HT, - * NL80211_EXT_FEATURE_BEACON_RATE_VHT and - * NL80211_EXT_FEATURE_BEACON_RATE_HE. + * NL80211_EXT_FEATURE_BEACON_RATE_VHT, + * NL80211_EXT_FEATURE_BEACON_RATE_HE and + * NL80211_EXT_FEATURE_BEACON_RATE_EHT. * * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain * at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME. @@ -2283,7 +2304,8 @@ enum nl80211_commands { * @NL80211_ATTR_PEER_AID: Association ID for the peer TDLS station (u16). * This is similar to @NL80211_ATTR_STA_AID but with a difference of being * allowed to be used with the first @NL80211_CMD_SET_STATION command to - * update a TDLS peer STA entry. + * update a TDLS peer STA entry. For S1G interfaces, this is limited to + * 1600 for the current mac80211 implementation. * * @NL80211_ATTR_COALESCE_RULE: Coalesce rule information. * @@ -2928,6 +2950,29 @@ enum nl80211_commands { * required alongside this attribute. Refer to * @enum nl80211_s1g_short_beacon_attrs for the attribute definitions. * + * @NL80211_ATTR_BSS_PARAM: nested attribute used with %NL80211_CMD_GET_WIPHY + * which indicates which BSS parameters can be modified. The attribute can + * also be used as flag attribute by user-space in %NL80211_CMD_SET_BSS to + * indicate that it wants strict checking on the BSS parameters to be + * modified. + * + * @NL80211_ATTR_NAN_CONFIG: Nested attribute for + * extended NAN cluster configuration. This is used with + * %NL80211_CMD_START_NAN and %NL80211_CMD_CHANGE_NAN_CONFIG. + * See &enum nl80211_nan_conf_attributes for details. + * This attribute is optional. + * @NL80211_ATTR_NAN_NEW_CLUSTER: Flag attribute indicating that a new + * NAN cluster has been created. This is used with + * %NL80211_CMD_NAN_CLUSTER_JOINED + * @NL80211_ATTR_NAN_CAPABILITIES: Nested attribute for NAN capabilities. + * This is used with %NL80211_CMD_GET_WIPHY to indicate the NAN + * capabilities supported by the driver. See &enum nl80211_nan_capabilities + * for details. + * + * @NL80211_ATTR_S1G_PRIMARY_2MHZ: flag attribute indicating that the S1G + * primary channel is 2 MHz wide, and the control channel designates + * the 1 MHz primary subchannel within that 2 MHz primary. + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use @@ -3489,6 +3534,12 @@ enum nl80211_attrs { NL80211_ATTR_S1G_LONG_BEACON_PERIOD, NL80211_ATTR_S1G_SHORT_BEACON, + NL80211_ATTR_BSS_PARAM, + NL80211_ATTR_NAN_CONFIG, + NL80211_ATTR_NAN_NEW_CLUSTER, + NL80211_ATTR_NAN_CAPABILITIES, + + NL80211_ATTR_S1G_PRIMARY_2MHZ, /* add attributes here, update the policy in nl80211.c */ @@ -3736,6 +3787,22 @@ enum nl80211_eht_gi { }; /** + * enum nl80211_eht_ltf - EHT long training field + * @NL80211_RATE_INFO_EHT_1XLTF: 3.2 usec + * @NL80211_RATE_INFO_EHT_2XLTF: 6.4 usec + * @NL80211_RATE_INFO_EHT_4XLTF: 12.8 usec + * @NL80211_RATE_INFO_EHT_6XLTF: 19.2 usec + * @NL80211_RATE_INFO_EHT_8XLTF: 25.6 usec + */ +enum nl80211_eht_ltf { + NL80211_RATE_INFO_EHT_1XLTF, + NL80211_RATE_INFO_EHT_2XLTF, + NL80211_RATE_INFO_EHT_4XLTF, + NL80211_RATE_INFO_EHT_6XLTF, + NL80211_RATE_INFO_EHT_8XLTF, +}; + +/** * enum nl80211_eht_ru_alloc - EHT RU allocation values * @NL80211_RATE_INFO_EHT_RU_ALLOC_26: 26-tone RU allocation * @NL80211_RATE_INFO_EHT_RU_ALLOC_52: 52-tone RU allocation @@ -4371,6 +4438,12 @@ enum nl80211_wmm_rule { * very low power (VLP) AP, despite being NO_IR. * @NL80211_FREQUENCY_ATTR_ALLOW_20MHZ_ACTIVITY: This channel can be active in * 20 MHz bandwidth, despite being NO_IR. + * @NL80211_FREQUENCY_ATTR_NO_4MHZ: 4 MHz operation is not allowed on this + * channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_NO_8MHZ: 8 MHz operation is not allowed on this + * channel in current regulatory domain. + * @NL80211_FREQUENCY_ATTR_NO_16MHZ: 16 MHz operation is not allowed on this + * channel in current regulatory domain. * @NL80211_FREQUENCY_ATTR_MAX: highest frequency attribute number * currently defined * @__NL80211_FREQUENCY_ATTR_AFTER_LAST: internal use @@ -4416,6 +4489,9 @@ enum nl80211_frequency_attr { NL80211_FREQUENCY_ATTR_CAN_MONITOR, NL80211_FREQUENCY_ATTR_ALLOW_6GHZ_VLP_AP, NL80211_FREQUENCY_ATTR_ALLOW_20MHZ_ACTIVITY, + NL80211_FREQUENCY_ATTR_NO_4MHZ, + NL80211_FREQUENCY_ATTR_NO_8MHZ, + NL80211_FREQUENCY_ATTR_NO_16MHZ, /* keep last */ __NL80211_FREQUENCY_ATTR_AFTER_LAST, @@ -5481,6 +5557,10 @@ enum nl80211_key_attributes { * see &struct nl80211_txrate_he * @NL80211_TXRATE_HE_GI: configure HE GI, 0.8us, 1.6us and 3.2us. * @NL80211_TXRATE_HE_LTF: configure HE LTF, 1XLTF, 2XLTF and 4XLTF. + * @NL80211_TXRATE_EHT: EHT rates allowed for TX rate selection, + * see &struct nl80211_txrate_eht + * @NL80211_TXRATE_EHT_GI: configure EHT GI, (u8, see &enum nl80211_eht_gi) + * @NL80211_TXRATE_EHT_LTF: configure EHT LTF, (u8, see &enum nl80211_eht_ltf) * @__NL80211_TXRATE_AFTER_LAST: internal * @NL80211_TXRATE_MAX: highest TX rate attribute */ @@ -5493,6 +5573,9 @@ enum nl80211_tx_rate_attributes { NL80211_TXRATE_HE, NL80211_TXRATE_HE_GI, NL80211_TXRATE_HE_LTF, + NL80211_TXRATE_EHT, + NL80211_TXRATE_EHT_GI, + NL80211_TXRATE_EHT_LTF, /* keep last */ __NL80211_TXRATE_AFTER_LAST, @@ -5525,6 +5608,15 @@ enum nl80211_txrate_gi { NL80211_TXRATE_FORCE_LGI, }; +#define NL80211_EHT_NSS_MAX 16 +/** + * struct nl80211_txrate_eht - EHT MCS/NSS txrate bitmap + * @mcs: MCS bitmap table for each NSS (array index 0 for 1 stream, etc.) + */ +struct nl80211_txrate_eht { + __u16 mcs[NL80211_EHT_NSS_MAX]; +}; + /** * enum nl80211_band - Frequency band * @NL80211_BAND_2GHZ: 2.4 GHz ISM band @@ -6649,6 +6741,9 @@ enum nl80211_feature_flags { * (signaling and payload protected) A-MSDUs and this shall be advertised * in the RSNXE. * + * @NL80211_EXT_FEATURE_BEACON_RATE_EHT: Driver supports beacon rate + * configuration (AP/mesh) with EHT rates. + * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. */ @@ -6724,6 +6819,7 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_OWE_OFFLOAD_AP, NL80211_EXT_FEATURE_DFS_CONCURRENT, NL80211_EXT_FEATURE_SPP_AMSDU_SUPPORT, + NL80211_EXT_FEATURE_BEACON_RATE_EHT, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, @@ -7279,6 +7375,105 @@ enum nl80211_nan_match_attributes { }; /** + * enum nl80211_nan_band_conf_attributes - NAN band configuration attributes + * @__NL80211_NAN_BAND_CONF_INVALID: Invalid. + * @NL80211_NAN_BAND_CONF_BAND: Band for which the configuration is + * being set. The value is according to &enum nl80211_band (u8). + * @NL80211_NAN_BAND_CONF_FREQ: Discovery frequency. This attribute shall not + * be present on 2.4 GHZ band. On 5 GHz band its presence is optional. + * The allowed values are 5220 (channel 44) or 5745 (channel 149). + * If not present, channel 149 is used if allowed, otherwise channel 44 + * will be selected. The value is in MHz (u16). + * @NL80211_NAN_BAND_CONF_RSSI_CLOSE: RSSI close threshold used for NAN state + * transition algorithm as described in chapters 3.3.6 and 3.3.7 "NAN + * Device Role and State Transition" of Wi-Fi Aware (TM) Specification + * v4.0. If not specified, default device value is used. The value should + * be greater than -60 dBm (s8). + * @NL80211_NAN_BAND_CONF_RSSI_MIDDLE: RSSI middle threshold used for NAN state + * transition algorithm as described in chapters 3.3.6 and 3.3.7 "NAN + * Device Role and State Transition" of Wi-Fi Aware (TM) Specification + * v4.0. If not present, default device value is used. The value should be + * greater than -75 dBm and less than %NL80211_NAN_BAND_CONF_RSSI_CLOSE + * (s8). + * @NL80211_NAN_BAND_CONF_WAKE_DW: Committed DW information (values 0-5). + * Value 0 means that the device will not wake up during the + * discovery window. Values 1-5 mean that the device will wake up + * during each 2^(n - 1) discovery window, where n is the value of + * this attribute. Setting this attribute to 0 is not allowed on + * 2.4 GHz band (u8). This is an optional parameter (default is 1). + * @NL80211_NAN_BAND_CONF_DISABLE_SCAN: Optional flag attribute to disable + * scanning (for cluster merge) on the band. If set, the device will not + * scan on this band anymore. Disabling scanning on 2.4 GHz band is not + * allowed. + * @NUM_NL80211_NAN_BAND_CONF_ATTR: Internal. + * @NL80211_NAN_BAND_CONF_ATTR_MAX: Highest NAN band configuration attribute. + * + * These attributes are used to configure NAN band-specific parameters. Note, + * that both RSSI attributes should be configured (or both left unset). + */ +enum nl80211_nan_band_conf_attributes { + __NL80211_NAN_BAND_CONF_INVALID, + NL80211_NAN_BAND_CONF_BAND, + NL80211_NAN_BAND_CONF_FREQ, + NL80211_NAN_BAND_CONF_RSSI_CLOSE, + NL80211_NAN_BAND_CONF_RSSI_MIDDLE, + NL80211_NAN_BAND_CONF_WAKE_DW, + NL80211_NAN_BAND_CONF_DISABLE_SCAN, + + /* keep last */ + NUM_NL80211_NAN_BAND_CONF_ATTR, + NL80211_NAN_BAND_CONF_ATTR_MAX = NUM_NL80211_NAN_BAND_CONF_ATTR - 1, +}; + +/** + * enum nl80211_nan_conf_attributes - NAN configuration attributes + * @__NL80211_NAN_CONF_INVALID: Invalid attribute, used for validation. + * @NL80211_NAN_CONF_CLUSTER_ID: ID for the NAN cluster. This is a MAC + * address that can take values from 50-6F-9A-01-00-00 to + * 50-6F-9A-01-FF-FF. This attribute is optional. If not present, + * a random Cluster ID will be chosen. + * @NL80211_NAN_CONF_EXTRA_ATTRS: Additional NAN attributes to be + * published in the beacons. This is an optional byte array. + * @NL80211_NAN_CONF_VENDOR_ELEMS: Vendor-specific elements that will + * be published in the beacons. This is an optional byte array. + * @NL80211_NAN_CONF_BAND_CONFIGS: This is a nested array attribute, + * containing multiple entries for each supported band. Each band + * configuration consists of &enum nl80211_nan_band_conf_attributes. + * @NL80211_NAN_CONF_SCAN_PERIOD: Scan period in seconds. If not configured, + * device default is used. Zero value will disable scanning. + * This is u16 (optional). + * @NL80211_NAN_CONF_SCAN_DWELL_TIME: Scan dwell time in TUs per channel. + * Only non-zero values are valid. If not configured the device default + * value is used. This is u16 (optional) + * @NL80211_NAN_CONF_DISCOVERY_BEACON_INTERVAL: Discovery beacon interval + * in TUs. Valid range is 50-200 TUs. If not configured the device default + * value is used. This is u8 (optional) + * @NL80211_NAN_CONF_NOTIFY_DW: If set, the driver will notify userspace about + * the upcoming discovery window with + * %NL80211_CMD_NAN_NEXT_DW_NOTIFICATION. + * This is a flag attribute. + * @NUM_NL80211_NAN_CONF_ATTR: Internal. + * @NL80211_NAN_CONF_ATTR_MAX: Highest NAN configuration attribute. + * + * These attributes are used to configure NAN-specific parameters. + */ +enum nl80211_nan_conf_attributes { + __NL80211_NAN_CONF_INVALID, + NL80211_NAN_CONF_CLUSTER_ID, + NL80211_NAN_CONF_EXTRA_ATTRS, + NL80211_NAN_CONF_VENDOR_ELEMS, + NL80211_NAN_CONF_BAND_CONFIGS, + NL80211_NAN_CONF_SCAN_PERIOD, + NL80211_NAN_CONF_SCAN_DWELL_TIME, + NL80211_NAN_CONF_DISCOVERY_BEACON_INTERVAL, + NL80211_NAN_CONF_NOTIFY_DW, + + /* keep last */ + NUM_NL80211_NAN_CONF_ATTR, + NL80211_NAN_CONF_ATTR_MAX = NUM_NL80211_NAN_CONF_ATTR - 1, +}; + +/** * enum nl80211_external_auth_action - Action to perform with external * authentication request. Used by NL80211_ATTR_EXTERNAL_AUTH_ACTION. * @NL80211_EXTERNAL_AUTH_START: Start the authentication. @@ -8187,4 +8382,54 @@ enum nl80211_s1g_short_beacon_attrs { __NL80211_S1G_SHORT_BEACON_ATTR_LAST - 1 }; +/** + * enum nl80211_nan_capabilities - NAN (Neighbor Aware Networking) + * capabilities. + * + * @__NL80211_NAN_CAPABILITIES_INVALID: Invalid. + * @NL80211_NAN_CAPA_CONFIGURABLE_SYNC: Flag attribute indicating that + * the device supports configurable synchronization. If set, the device + * should be able to handle %NL80211_ATTR_NAN_CONFIG + * attribute in the %NL80211_CMD_START_NAN (and change) command. + * @NL80211_NAN_CAPA_USERSPACE_DE: Flag attribute indicating that + * NAN Discovery Engine (DE) is not offloaded and the driver assumes + * user space DE implementation. When set, %NL80211_CMD_ADD_NAN_FUNCTION, + * %NL80211_CMD_DEL_NAN_FUNCTION and %NL80211_CMD_NAN_MATCH commands + * should not be used. In addition, the device/driver should support + * sending discovery window (DW) notifications using + * %NL80211_CMD_NAN_NEXT_DW_NOTIFICATION and handling transmission and + * reception of NAN SDF frames on NAN device interface during DW windows. + * (%NL80211_CMD_FRAME is used to transmit SDFs) + * @NL80211_NAN_CAPA_OP_MODE: u8 attribute indicating the supported operation + * modes as defined in Wi-Fi Aware (TM) specification Table 81 (Operation + * Mode field format). + * @NL80211_NAN_CAPA_NUM_ANTENNAS: u8 attribute indicating the number of + * TX and RX antennas supported by the device. Lower nibble indicates + * the number of TX antennas and upper nibble indicates the number of RX + * antennas. Value 0 indicates the information is not available. + * See table 79 of Wi-Fi Aware (TM) specification (Number of + * Antennas field). + * @NL80211_NAN_CAPA_MAX_CHANNEL_SWITCH_TIME: u16 attribute indicating the + * maximum time in microseconds that the device requires to switch + * channels. + * @NL80211_NAN_CAPA_CAPABILITIES: u8 attribute containing the + * capabilities of the device as defined in Wi-Fi Aware (TM) + * specification Table 79 (Capabilities field). + * @__NL80211_NAN_CAPABILITIES_LAST: Internal + * @NL80211_NAN_CAPABILITIES_MAX: Highest NAN capability attribute. + */ +enum nl80211_nan_capabilities { + __NL80211_NAN_CAPABILITIES_INVALID, + + NL80211_NAN_CAPA_CONFIGURABLE_SYNC, + NL80211_NAN_CAPA_USERSPACE_DE, + NL80211_NAN_CAPA_OP_MODE, + NL80211_NAN_CAPA_NUM_ANTENNAS, + NL80211_NAN_CAPA_MAX_CHANNEL_SWITCH_TIME, + NL80211_NAN_CAPA_CAPABILITIES, + /* keep last */ + __NL80211_NAN_CAPABILITIES_LAST, + NL80211_NAN_CAPABILITIES_MAX = __NL80211_NAN_CAPABILITIES_LAST - 1, +}; + #endif /* __LINUX_NL80211_H */ |