summaryrefslogtreecommitdiff
path: root/include/uapi
diff options
context:
space:
mode:
Diffstat (limited to 'include/uapi')
-rw-r--r--include/uapi/linux/i8k.h2
-rw-r--r--include/uapi/linux/tee.h87
-rw-r--r--include/uapi/linux/virtio_ids.h1
-rw-r--r--include/uapi/linux/virtio_spi.h181
4 files changed, 263 insertions, 8 deletions
diff --git a/include/uapi/linux/i8k.h b/include/uapi/linux/i8k.h
index 268e6268f6c8..a16e4049710f 100644
--- a/include/uapi/linux/i8k.h
+++ b/include/uapi/linux/i8k.h
@@ -36,6 +36,8 @@
#define I8K_FAN_LOW 1
#define I8K_FAN_HIGH 2
#define I8K_FAN_TURBO 3
+/* Many machines treat this mode as some sort of automatic mode */
+#define I8K_FAN_AUTO 3
#define I8K_FAN_MAX I8K_FAN_TURBO
#define I8K_VOL_UP 1
diff --git a/include/uapi/linux/tee.h b/include/uapi/linux/tee.h
index d0430bee8292..386ad36f1a0a 100644
--- a/include/uapi/linux/tee.h
+++ b/include/uapi/linux/tee.h
@@ -42,14 +42,16 @@
#define TEE_IOC_MAGIC 0xa4
#define TEE_IOC_BASE 0
-#define TEE_MAX_ARG_SIZE 1024
+#define TEE_MAX_ARG_SIZE 4096
#define TEE_GEN_CAP_GP (1 << 0)/* GlobalPlatform compliant TEE */
#define TEE_GEN_CAP_PRIVILEGED (1 << 1)/* Privileged device (for supplicant) */
#define TEE_GEN_CAP_REG_MEM (1 << 2)/* Supports registering shared memory */
#define TEE_GEN_CAP_MEMREF_NULL (1 << 3)/* NULL MemRef support */
+#define TEE_GEN_CAP_OBJREF (1 << 4)/* Supports generic object reference */
-#define TEE_MEMREF_NULL (__u64)(-1) /* NULL MemRef Buffer */
+#define TEE_MEMREF_NULL ((__u64)(-1)) /* NULL MemRef Buffer */
+#define TEE_OBJREF_NULL ((__u64)(-1)) /* NULL ObjRef Object */
/*
* TEE Implementation ID
@@ -57,6 +59,7 @@
#define TEE_IMPL_ID_OPTEE 1
#define TEE_IMPL_ID_AMDTEE 2
#define TEE_IMPL_ID_TSTEE 3
+#define TEE_IMPL_ID_QTEE 4
/*
* OP-TEE specific capabilities
@@ -152,6 +155,20 @@ struct tee_ioctl_buf_data {
#define TEE_IOCTL_PARAM_ATTR_TYPE_MEMREF_INOUT 7 /* input and output */
/*
+ * These defines userspace buffer parameters.
+ */
+#define TEE_IOCTL_PARAM_ATTR_TYPE_UBUF_INPUT 8
+#define TEE_IOCTL_PARAM_ATTR_TYPE_UBUF_OUTPUT 9
+#define TEE_IOCTL_PARAM_ATTR_TYPE_UBUF_INOUT 10 /* input and output */
+
+/*
+ * These defines object reference parameters.
+ */
+#define TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF_INPUT 11
+#define TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF_OUTPUT 12
+#define TEE_IOCTL_PARAM_ATTR_TYPE_OBJREF_INOUT 13
+
+/*
* Mask for the type part of the attribute, leaves room for more types
*/
#define TEE_IOCTL_PARAM_ATTR_TYPE_MASK 0xff
@@ -186,14 +203,18 @@ struct tee_ioctl_buf_data {
/**
* struct tee_ioctl_param - parameter
* @attr: attributes
- * @a: if a memref, offset into the shared memory object, else a value parameter
- * @b: if a memref, size of the buffer, else a value parameter
+ * @a: if a memref, offset into the shared memory object,
+ * else if a ubuf, address of the user buffer,
+ * else if an objref, object identifier, else a value parameter
+ * @b: if a memref or ubuf, size of the buffer,
+ * else if objref, flags for the object, else a value parameter
* @c: if a memref, shared memory identifier, else a value parameter
*
- * @attr & TEE_PARAM_ATTR_TYPE_MASK indicates if memref or value is used in
- * the union. TEE_PARAM_ATTR_TYPE_VALUE_* indicates value and
- * TEE_PARAM_ATTR_TYPE_MEMREF_* indicates memref. TEE_PARAM_ATTR_TYPE_NONE
- * indicates that none of the members are used.
+ * @attr & TEE_PARAM_ATTR_TYPE_MASK indicates if memref, ubuf, or value is
+ * used in the union. TEE_PARAM_ATTR_TYPE_VALUE_* indicates value,
+ * TEE_PARAM_ATTR_TYPE_MEMREF_* indicates memref, TEE_PARAM_ATTR_TYPE_UBUF_*
+ * indicates ubuf, and TEE_PARAM_ATTR_TYPE_OBJREF_* indicates objref.
+ * TEE_PARAM_ATTR_TYPE_NONE indicates that none of the members are used.
*
* Shared memory is allocated with TEE_IOC_SHM_ALLOC which returns an
* identifier representing the shared memory object. A memref can reference
@@ -379,6 +400,37 @@ struct tee_ioctl_shm_register_data {
};
/**
+ * struct tee_ioctl_shm_register_fd_data - Shared memory registering argument
+ * @fd: [in] File descriptor identifying dmabuf reference
+ * @size: [out] Size of referenced memory
+ * @flags: [in] Flags to/from allocation.
+ * @id: [out] Identifier of the shared memory
+ *
+ * The flags field should currently be zero as input. Updated by the call
+ * with actual flags as defined by TEE_IOCTL_SHM_* above.
+ * This structure is used as argument for TEE_IOC_SHM_REGISTER_FD below.
+ */
+struct tee_ioctl_shm_register_fd_data {
+ __s64 fd;
+ __u64 size;
+ __u32 flags;
+ __s32 id;
+};
+
+/**
+ * TEE_IOC_SHM_REGISTER_FD - register a shared memory from a file descriptor
+ *
+ * Returns a file descriptor on success or < 0 on failure
+ *
+ * The returned file descriptor refers to the shared memory object in the
+ * kernel. The supplied file deccriptor can be closed if it's not needed
+ * for other purposes. The shared memory is freed when the descriptor is
+ * closed.
+ */
+#define TEE_IOC_SHM_REGISTER_FD _IOWR(TEE_IOC_MAGIC, TEE_IOC_BASE + 8, \
+ struct tee_ioctl_shm_register_fd_data)
+
+/**
* TEE_IOC_SHM_REGISTER - Register shared memory argument
*
* Registers shared memory between the user space process and secure OS.
@@ -401,4 +453,23 @@ struct tee_ioctl_shm_register_data {
* munmap(): unmaps previously shared memory
*/
+/**
+ * struct tee_ioctl_invoke_func_arg - Invokes an object in a Trusted Application
+ * @id: [in] Object id
+ * @op: [in] Object operation, specific to the object
+ * @ret: [out] return value
+ * @num_params: [in] number of parameters following this struct
+ */
+struct tee_ioctl_object_invoke_arg {
+ __u64 id;
+ __u32 op;
+ __u32 ret;
+ __u32 num_params;
+ /* num_params tells the actual number of element in params */
+ struct tee_ioctl_param params[];
+};
+
+#define TEE_IOC_OBJECT_INVOKE _IOR(TEE_IOC_MAGIC, TEE_IOC_BASE + 10, \
+ struct tee_ioctl_buf_data)
+
#endif /*__TEE_H*/
diff --git a/include/uapi/linux/virtio_ids.h b/include/uapi/linux/virtio_ids.h
index 7aa2eb766205..6c12db16faa3 100644
--- a/include/uapi/linux/virtio_ids.h
+++ b/include/uapi/linux/virtio_ids.h
@@ -68,6 +68,7 @@
#define VIRTIO_ID_AUDIO_POLICY 39 /* virtio audio policy */
#define VIRTIO_ID_BT 40 /* virtio bluetooth */
#define VIRTIO_ID_GPIO 41 /* virtio gpio */
+#define VIRTIO_ID_SPI 45 /* virtio spi */
/*
* Virtio Transitional IDs
diff --git a/include/uapi/linux/virtio_spi.h b/include/uapi/linux/virtio_spi.h
new file mode 100644
index 000000000000..8ab3c970cdd3
--- /dev/null
+++ b/include/uapi/linux/virtio_spi.h
@@ -0,0 +1,181 @@
+/* SPDX-License-Identifier: BSD-3-Clause */
+/*
+ * Copyright (C) 2023 OpenSynergy GmbH
+ * Copyright (C) 2025 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+#ifndef _LINUX_VIRTIO_VIRTIO_SPI_H
+#define _LINUX_VIRTIO_VIRTIO_SPI_H
+
+#include <linux/types.h>
+#include <linux/virtio_config.h>
+#include <linux/virtio_ids.h>
+#include <linux/virtio_types.h>
+
+/* Sample data on trailing clock edge */
+#define VIRTIO_SPI_CPHA _BITUL(0)
+/* Clock is high when IDLE */
+#define VIRTIO_SPI_CPOL _BITUL(1)
+/* Chip Select is active high */
+#define VIRTIO_SPI_CS_HIGH _BITUL(2)
+/* Transmit LSB first */
+#define VIRTIO_SPI_MODE_LSB_FIRST _BITUL(3)
+/* Loopback mode */
+#define VIRTIO_SPI_MODE_LOOP _BITUL(4)
+
+/**
+ * struct virtio_spi_config - All config fields are read-only for the
+ * Virtio SPI driver
+ * @cs_max_number: maximum number of chipselect the host SPI controller
+ * supports.
+ * @cs_change_supported: indicates if the host SPI controller supports to toggle
+ * chipselect after each transfer in one message:
+ * 0: unsupported, chipselect will be kept in active state throughout the
+ * message transaction;
+ * 1: supported.
+ * Note: Message here contains a sequence of SPI transfers.
+ * @tx_nbits_supported: indicates the supported number of bit for writing:
+ * bit 0: DUAL (2-bit transfer), 1 for supported
+ * bit 1: QUAD (4-bit transfer), 1 for supported
+ * bit 2: OCTAL (8-bit transfer), 1 for supported
+ * other bits are reserved as 0, 1-bit transfer is always supported.
+ * @rx_nbits_supported: indicates the supported number of bit for reading:
+ * bit 0: DUAL (2-bit transfer), 1 for supported
+ * bit 1: QUAD (4-bit transfer), 1 for supported
+ * bit 2: OCTAL (8-bit transfer), 1 for supported
+ * other bits are reserved as 0, 1-bit transfer is always supported.
+ * @bits_per_word_mask: mask indicating which values of bits_per_word are
+ * supported. If not set, no limitation for bits_per_word.
+ * @mode_func_supported: indicates the following features are supported or not:
+ * bit 0-1: CPHA feature
+ * 0b00: invalid, should support as least one CPHA setting
+ * 0b01: supports CPHA=0 only
+ * 0b10: supports CPHA=1 only
+ * 0b11: supports CPHA=0 and CPHA=1.
+ * bit 2-3: CPOL feature
+ * 0b00: invalid, should support as least one CPOL setting
+ * 0b01: supports CPOL=0 only
+ * 0b10: supports CPOL=1 only
+ * 0b11: supports CPOL=0 and CPOL=1.
+ * bit 4: chipselect active high feature, 0 for unsupported and 1 for
+ * supported, chipselect active low is supported by default.
+ * bit 5: LSB first feature, 0 for unsupported and 1 for supported,
+ * MSB first is supported by default.
+ * bit 6: loopback mode feature, 0 for unsupported and 1 for supported,
+ * normal mode is supported by default.
+ * @max_freq_hz: the maximum clock rate supported in Hz unit, 0 means no
+ * limitation for transfer speed.
+ * @max_word_delay_ns: the maximum word delay supported, in nanoseconds.
+ * A value of 0 indicates that word delay is unsupported.
+ * Each transfer may consist of a sequence of words.
+ * @max_cs_setup_ns: the maximum delay supported after chipselect is asserted,
+ * in ns unit, 0 means delay is not supported to introduce after chipselect is
+ * asserted.
+ * @max_cs_hold_ns: the maximum delay supported before chipselect is deasserted,
+ * in ns unit, 0 means delay is not supported to introduce before chipselect
+ * is deasserted.
+ * @max_cs_incative_ns: maximum delay supported after chipselect is deasserted,
+ * in ns unit, 0 means delay is not supported to introduce after chipselect is
+ * deasserted.
+ */
+struct virtio_spi_config {
+ __u8 cs_max_number;
+ __u8 cs_change_supported;
+#define VIRTIO_SPI_RX_TX_SUPPORT_DUAL _BITUL(0)
+#define VIRTIO_SPI_RX_TX_SUPPORT_QUAD _BITUL(1)
+#define VIRTIO_SPI_RX_TX_SUPPORT_OCTAL _BITUL(2)
+ __u8 tx_nbits_supported;
+ __u8 rx_nbits_supported;
+ __le32 bits_per_word_mask;
+#define VIRTIO_SPI_MF_SUPPORT_CPHA_0 _BITUL(0)
+#define VIRTIO_SPI_MF_SUPPORT_CPHA_1 _BITUL(1)
+#define VIRTIO_SPI_MF_SUPPORT_CPOL_0 _BITUL(2)
+#define VIRTIO_SPI_MF_SUPPORT_CPOL_1 _BITUL(3)
+#define VIRTIO_SPI_MF_SUPPORT_CS_HIGH _BITUL(4)
+#define VIRTIO_SPI_MF_SUPPORT_LSB_FIRST _BITUL(5)
+#define VIRTIO_SPI_MF_SUPPORT_LOOPBACK _BITUL(6)
+ __le32 mode_func_supported;
+ __le32 max_freq_hz;
+ __le32 max_word_delay_ns;
+ __le32 max_cs_setup_ns;
+ __le32 max_cs_hold_ns;
+ __le32 max_cs_inactive_ns;
+};
+
+/**
+ * struct spi_transfer_head - virtio SPI transfer descriptor
+ * @chip_select_id: chipselect index the SPI transfer used.
+ * @bits_per_word: the number of bits in each SPI transfer word.
+ * @cs_change: whether to deselect device after finishing this transfer
+ * before starting the next transfer, 0 means cs keep asserted and
+ * 1 means cs deasserted then asserted again.
+ * @tx_nbits: bus width for write transfer.
+ * 0,1: bus width is 1, also known as SINGLE
+ * 2 : bus width is 2, also known as DUAL
+ * 4 : bus width is 4, also known as QUAD
+ * 8 : bus width is 8, also known as OCTAL
+ * other values are invalid.
+ * @rx_nbits: bus width for read transfer.
+ * 0,1: bus width is 1, also known as SINGLE
+ * 2 : bus width is 2, also known as DUAL
+ * 4 : bus width is 4, also known as QUAD
+ * 8 : bus width is 8, also known as OCTAL
+ * other values are invalid.
+ * @reserved: for future use.
+ * @mode: SPI transfer mode.
+ * bit 0: CPHA, determines the timing (i.e. phase) of the data
+ * bits relative to the clock pulses.For CPHA=0, the
+ * "out" side changes the data on the trailing edge of the
+ * preceding clock cycle, while the "in" side captures the data
+ * on (or shortly after) the leading edge of the clock cycle.
+ * For CPHA=1, the "out" side changes the data on the leading
+ * edge of the current clock cycle, while the "in" side
+ * captures the data on (or shortly after) the trailing edge of
+ * the clock cycle.
+ * bit 1: CPOL, determines the polarity of the clock. CPOL=0 is a
+ * clock which idles at 0, and each cycle consists of a pulse
+ * of 1. CPOL=1 is a clock which idles at 1, and each cycle
+ * consists of a pulse of 0.
+ * bit 2: CS_HIGH, if 1, chip select active high, else active low.
+ * bit 3: LSB_FIRST, determines per-word bits-on-wire, if 0, MSB
+ * first, else LSB first.
+ * bit 4: LOOP, loopback mode.
+ * @freq: the transfer speed in Hz.
+ * @word_delay_ns: delay to be inserted between consecutive words of a
+ * transfer, in ns unit.
+ * @cs_setup_ns: delay to be introduced after CS is asserted, in ns
+ * unit.
+ * @cs_delay_hold_ns: delay to be introduced before CS is deasserted
+ * for each transfer, in ns unit.
+ * @cs_change_delay_inactive_ns: delay to be introduced after CS is
+ * deasserted and before next asserted, in ns unit.
+ */
+struct spi_transfer_head {
+ __u8 chip_select_id;
+ __u8 bits_per_word;
+ __u8 cs_change;
+ __u8 tx_nbits;
+ __u8 rx_nbits;
+ __u8 reserved[3];
+ __le32 mode;
+ __le32 freq;
+ __le32 word_delay_ns;
+ __le32 cs_setup_ns;
+ __le32 cs_delay_hold_ns;
+ __le32 cs_change_delay_inactive_ns;
+};
+
+/**
+ * struct spi_transfer_result - virtio SPI transfer result
+ * @result: Transfer result code.
+ * VIRTIO_SPI_TRANS_OK: Transfer successful.
+ * VIRTIO_SPI_PARAM_ERR: Parameter error.
+ * VIRTIO_SPI_TRANS_ERR: Transfer error.
+ */
+struct spi_transfer_result {
+#define VIRTIO_SPI_TRANS_OK 0
+#define VIRTIO_SPI_PARAM_ERR 1
+#define VIRTIO_SPI_TRANS_ERR 2
+ __u8 result;
+};
+
+#endif /* #ifndef _LINUX_VIRTIO_VIRTIO_SPI_H */
generated by cgit v1.2.3 (git 2.46.0) at 2025-10-02 13:55:27 +0000