diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/linux/ethtool.h | 20 | ||||
| -rw-r--r-- | include/linux/pse-pd/pse.h | 51 | ||||
| -rw-r--r-- | include/uapi/linux/ethtool.h | 191 | ||||
| -rw-r--r-- | include/uapi/linux/ethtool_netlink.h | 12 |
4 files changed, 274 insertions, 0 deletions
diff --git a/include/linux/ethtool.h b/include/linux/ethtool.h index 3a99238ef895..e213b5508da6 100644 --- a/include/linux/ethtool.h +++ b/include/linux/ethtool.h @@ -1273,4 +1273,24 @@ struct ethtool_forced_speed_map { void ethtool_forced_speed_maps_init(struct ethtool_forced_speed_map *maps, u32 size); + +/* C33 PSE extended state and substate. */ +struct ethtool_c33_pse_ext_state_info { + enum ethtool_c33_pse_ext_state c33_pse_ext_state; + union { + enum ethtool_c33_pse_ext_substate_error_condition error_condition; + enum ethtool_c33_pse_ext_substate_mr_pse_enable mr_pse_enable; + enum ethtool_c33_pse_ext_substate_option_detect_ted option_detect_ted; + enum ethtool_c33_pse_ext_substate_option_vport_lim option_vport_lim; + enum ethtool_c33_pse_ext_substate_ovld_detected ovld_detected; + enum ethtool_c33_pse_ext_substate_power_not_available power_not_available; + enum ethtool_c33_pse_ext_substate_short_detected short_detected; + u32 __c33_pse_ext_substate; + }; +}; + +struct ethtool_c33_pse_pw_limit_range { + u32 min; + u32 max; +}; #endif /* _LINUX_ETHTOOL_H */ diff --git a/include/linux/pse-pd/pse.h b/include/linux/pse-pd/pse.h index 6eec24ffa866..591a53e082e6 100644 --- a/include/linux/pse-pd/pse.h +++ b/include/linux/pse-pd/pse.h @@ -9,6 +9,9 @@ #include <linux/list.h> #include <uapi/linux/ethtool.h> +/* Maximum current in uA according to IEEE 802.3-2022 Table 145-1 */ +#define MAX_PI_CURRENT 1920000 + struct phy_device; struct pse_controller_dev; @@ -36,12 +39,29 @@ struct pse_control_config { * functions. IEEE 802.3-2022 30.9.1.1.2 aPSEAdminState * @c33_pw_status: power detection status of the PSE. * IEEE 802.3-2022 30.9.1.1.5 aPSEPowerDetectionStatus: + * @c33_pw_class: detected class of a powered PD + * IEEE 802.3-2022 30.9.1.1.8 aPSEPowerClassification + * @c33_actual_pw: power currently delivered by the PSE in mW + * IEEE 802.3-2022 30.9.1.1.23 aPSEActualPower + * @c33_ext_state_info: extended state information of the PSE + * @c33_avail_pw_limit: available power limit of the PSE in mW + * IEEE 802.3-2022 145.2.5.4 pse_avail_pwr + * @c33_pw_limit_ranges: supported power limit configuration range. The driver + * is in charge of the memory allocation. + * @c33_pw_limit_nb_ranges: number of supported power limit configuration + * ranges */ struct pse_control_status { enum ethtool_podl_pse_admin_state podl_admin_state; enum ethtool_podl_pse_pw_d_status podl_pw_status; enum ethtool_c33_pse_admin_state c33_admin_state; enum ethtool_c33_pse_pw_d_status c33_pw_status; + u32 c33_pw_class; + u32 c33_actual_pw; + struct ethtool_c33_pse_ext_state_info c33_ext_state_info; + u32 c33_avail_pw_limit; + struct ethtool_c33_pse_pw_limit_range *c33_pw_limit_ranges; + u32 c33_pw_limit_nb_ranges; }; /** @@ -53,6 +73,14 @@ struct pse_control_status { * May also return negative errno. * @pi_enable: Configure the PSE PI as enabled. * @pi_disable: Configure the PSE PI as disabled. + * @pi_get_voltage: Return voltage similarly to get_voltage regulator + * callback. + * @pi_get_current_limit: Get the configured current limit similarly to + * get_current_limit regulator callback. + * @pi_set_current_limit: Configure the current limit similarly to + * set_current_limit regulator callback. + * Should not return an error in case of MAX_PI_CURRENT + * current value set. */ struct pse_controller_ops { int (*ethtool_get_status)(struct pse_controller_dev *pcdev, @@ -62,6 +90,11 @@ struct pse_controller_ops { int (*pi_is_enabled)(struct pse_controller_dev *pcdev, int id); int (*pi_enable)(struct pse_controller_dev *pcdev, int id); int (*pi_disable)(struct pse_controller_dev *pcdev, int id); + int (*pi_get_voltage)(struct pse_controller_dev *pcdev, int id); + int (*pi_get_current_limit)(struct pse_controller_dev *pcdev, + int id); + int (*pi_set_current_limit)(struct pse_controller_dev *pcdev, + int id, int max_uA); }; struct module; @@ -148,6 +181,11 @@ int pse_ethtool_get_status(struct pse_control *psec, int pse_ethtool_set_config(struct pse_control *psec, struct netlink_ext_ack *extack, const struct pse_control_config *config); +int pse_ethtool_set_pw_limit(struct pse_control *psec, + struct netlink_ext_ack *extack, + const unsigned int pw_limit); +int pse_ethtool_get_pw_limit(struct pse_control *psec, + struct netlink_ext_ack *extack); bool pse_has_podl(struct pse_control *psec); bool pse_has_c33(struct pse_control *psec); @@ -177,6 +215,19 @@ static inline int pse_ethtool_set_config(struct pse_control *psec, return -EOPNOTSUPP; } +static inline int pse_ethtool_set_pw_limit(struct pse_control *psec, + struct netlink_ext_ack *extack, + const unsigned int pw_limit) +{ + return -EOPNOTSUPP; +} + +static inline int pse_ethtool_get_pw_limit(struct pse_control *psec, + struct netlink_ext_ack *extack) +{ + return -EOPNOTSUPP; +} + static inline bool pse_has_podl(struct pse_control *psec) { return false; diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h index e011384c915c..230110b97029 100644 --- a/include/uapi/linux/ethtool.h +++ b/include/uapi/linux/ethtool.h @@ -753,6 +753,197 @@ enum ethtool_module_power_mode { }; /** + * enum ethtool_c33_pse_ext_state - groups of PSE extended states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_STATE_ERROR_CONDITION: Group of error_condition states + * @ETHTOOL_C33_PSE_EXT_STATE_MR_MPS_VALID: Group of mr_mps_valid states + * @ETHTOOL_C33_PSE_EXT_STATE_MR_PSE_ENABLE: Group of mr_pse_enable states + * @ETHTOOL_C33_PSE_EXT_STATE_OPTION_DETECT_TED: Group of option_detect_ted + * states + * @ETHTOOL_C33_PSE_EXT_STATE_OPTION_VPORT_LIM: Group of option_vport_lim states + * @ETHTOOL_C33_PSE_EXT_STATE_OVLD_DETECTED: Group of ovld_detected states + * @ETHTOOL_C33_PSE_EXT_STATE_PD_DLL_POWER_TYPE: Group of pd_dll_power_type + * states + * @ETHTOOL_C33_PSE_EXT_STATE_POWER_NOT_AVAILABLE: Group of power_not_available + * states + * @ETHTOOL_C33_PSE_EXT_STATE_SHORT_DETECTED: Group of short_detected states + */ +enum ethtool_c33_pse_ext_state { + ETHTOOL_C33_PSE_EXT_STATE_ERROR_CONDITION = 1, + ETHTOOL_C33_PSE_EXT_STATE_MR_MPS_VALID, + ETHTOOL_C33_PSE_EXT_STATE_MR_PSE_ENABLE, + ETHTOOL_C33_PSE_EXT_STATE_OPTION_DETECT_TED, + ETHTOOL_C33_PSE_EXT_STATE_OPTION_VPORT_LIM, + ETHTOOL_C33_PSE_EXT_STATE_OVLD_DETECTED, + ETHTOOL_C33_PSE_EXT_STATE_PD_DLL_POWER_TYPE, + ETHTOOL_C33_PSE_EXT_STATE_POWER_NOT_AVAILABLE, + ETHTOOL_C33_PSE_EXT_STATE_SHORT_DETECTED, +}; + +/** + * enum ethtool_c33_pse_ext_substate_mr_mps_valid - mr_mps_valid states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_MPS_VALID_DETECTED_UNDERLOAD: Underload + * state + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_MPS_VALID_CONNECTION_OPEN: Port is not + * connected + * + * The PSE monitors either the DC or AC Maintain Power Signature + * (MPS, see 33.2.9.1). This variable indicates the presence or absence of + * a valid MPS. + */ +enum ethtool_c33_pse_ext_substate_mr_mps_valid { + ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_MPS_VALID_DETECTED_UNDERLOAD = 1, + ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_MPS_VALID_CONNECTION_OPEN, +}; + +/** + * enum ethtool_c33_pse_ext_substate_error_condition - error_condition states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_NON_EXISTING_PORT: Non-existing + * port number + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNDEFINED_PORT: Undefined port + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_INTERNAL_HW_FAULT: Internal + * hardware fault + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_COMM_ERROR_AFTER_FORCE_ON: + * Communication error after force on + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNKNOWN_PORT_STATUS: Unknown + * port status + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_TURN_OFF: Host + * crash turn off + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_FORCE_SHUTDOWN: + * Host crash force shutdown + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_CONFIG_CHANGE: Configuration + * change + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_DETECTED_OVER_TEMP: Over + * temperature detected + * + * error_condition is a variable indicating the status of + * implementation-specific fault conditions or optionally other system faults + * that prevent the PSE from meeting the specifications in Table 33–11 and that + * require the PSE not to source power. These error conditions are different + * from those monitored by the state diagrams in Figure 33–10. + */ +enum ethtool_c33_pse_ext_substate_error_condition { + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_NON_EXISTING_PORT = 1, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNDEFINED_PORT, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_INTERNAL_HW_FAULT, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_COMM_ERROR_AFTER_FORCE_ON, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_UNKNOWN_PORT_STATUS, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_TURN_OFF, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_HOST_CRASH_FORCE_SHUTDOWN, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_CONFIG_CHANGE, + ETHTOOL_C33_PSE_EXT_SUBSTATE_ERROR_CONDITION_DETECTED_OVER_TEMP, +}; + +/** + * enum ethtool_c33_pse_ext_substate_mr_pse_enable - mr_pse_enable states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_PSE_ENABLE_DISABLE_PIN_ACTIVE: Disable + * pin active + * + * mr_pse_enable is control variable that selects PSE operation and test + * functions. + */ +enum ethtool_c33_pse_ext_substate_mr_pse_enable { + ETHTOOL_C33_PSE_EXT_SUBSTATE_MR_PSE_ENABLE_DISABLE_PIN_ACTIVE = 1, +}; + +/** + * enum ethtool_c33_pse_ext_substate_option_detect_ted - option_detect_ted + * states functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_DET_IN_PROCESS: Detection + * in process + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_CONNECTION_CHECK_ERROR: + * Connection check error + * + * option_detect_ted is a variable indicating if detection can be performed + * by the PSE during the ted_timer interval. + */ +enum ethtool_c33_pse_ext_substate_option_detect_ted { + ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_DET_IN_PROCESS = 1, + ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_DETECT_TED_CONNECTION_CHECK_ERROR, +}; + +/** + * enum ethtool_c33_pse_ext_substate_option_vport_lim - option_vport_lim states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_HIGH_VOLTAGE: Main supply + * voltage is high + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_LOW_VOLTAGE: Main supply + * voltage is low + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_VOLTAGE_INJECTION: Voltage + * injection into the port + * + * option_vport_lim is an optional variable indicates if VPSE is out of the + * operating range during normal operating state. + */ +enum ethtool_c33_pse_ext_substate_option_vport_lim { + ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_HIGH_VOLTAGE = 1, + ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_LOW_VOLTAGE, + ETHTOOL_C33_PSE_EXT_SUBSTATE_OPTION_VPORT_LIM_VOLTAGE_INJECTION, +}; + +/** + * enum ethtool_c33_pse_ext_substate_ovld_detected - ovld_detected states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_OVLD_DETECTED_OVERLOAD: Overload state + * + * ovld_detected is a variable indicating if the PSE output current has been + * in an overload condition (see 33.2.7.6) for at least TCUT of a one-second + * sliding time. + */ +enum ethtool_c33_pse_ext_substate_ovld_detected { + ETHTOOL_C33_PSE_EXT_SUBSTATE_OVLD_DETECTED_OVERLOAD = 1, +}; + +/** + * enum ethtool_c33_pse_ext_substate_power_not_available - power_not_available + * states functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_BUDGET_EXCEEDED: Power + * budget exceeded for the controller + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PORT_PW_LIMIT_EXCEEDS_CONTROLLER_BUDGET: + * Configured port power limit exceeded controller power budget + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PD_REQUEST_EXCEEDS_PORT_LIMIT: + * Power request from PD exceeds port limit + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_HW_PW_LIMIT: Power + * denied due to Hardware power limit + * + * power_not_available is a variable that is asserted in an + * implementation-dependent manner when the PSE is no longer capable of + * sourcing sufficient power to support the attached PD. Sufficient power + * is defined by classification; see 33.2.6. + */ +enum ethtool_c33_pse_ext_substate_power_not_available { + ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_BUDGET_EXCEEDED = 1, + ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PORT_PW_LIMIT_EXCEEDS_CONTROLLER_BUDGET, + ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_PD_REQUEST_EXCEEDS_PORT_LIMIT, + ETHTOOL_C33_PSE_EXT_SUBSTATE_POWER_NOT_AVAILABLE_HW_PW_LIMIT, +}; + +/** + * enum ethtool_c33_pse_ext_substate_short_detected - short_detected states + * functions. IEEE 802.3-2022 33.2.4.4 Variables + * + * @ETHTOOL_C33_PSE_EXT_SUBSTATE_SHORT_DETECTED_SHORT_CONDITION: Short + * condition was detected + * + * short_detected is a variable indicating if the PSE output current has been + * in a short circuit condition for TLIM within a sliding window (see 33.2.7.7). + */ +enum ethtool_c33_pse_ext_substate_short_detected { + ETHTOOL_C33_PSE_EXT_SUBSTATE_SHORT_DETECTED_SHORT_CONDITION = 1, +}; + +/** * enum ethtool_pse_types - Types of PSE controller. * @ETHTOOL_PSE_UNKNOWN: Type of PSE controller is unknown * @ETHTOOL_PSE_PODL: PSE controller which support PoDL diff --git a/include/uapi/linux/ethtool_netlink.h b/include/uapi/linux/ethtool_netlink.h index 840dabdc9d88..6d5bdcc67631 100644 --- a/include/uapi/linux/ethtool_netlink.h +++ b/include/uapi/linux/ethtool_netlink.h @@ -931,6 +931,12 @@ enum { /* Power Sourcing Equipment */ enum { + ETHTOOL_A_C33_PSE_PW_LIMIT_UNSPEC, + ETHTOOL_A_C33_PSE_PW_LIMIT_MIN, /* u32 */ + ETHTOOL_A_C33_PSE_PW_LIMIT_MAX, /* u32 */ +}; + +enum { ETHTOOL_A_PSE_UNSPEC, ETHTOOL_A_PSE_HEADER, /* nest - _A_HEADER_* */ ETHTOOL_A_PODL_PSE_ADMIN_STATE, /* u32 */ @@ -939,6 +945,12 @@ enum { ETHTOOL_A_C33_PSE_ADMIN_STATE, /* u32 */ ETHTOOL_A_C33_PSE_ADMIN_CONTROL, /* u32 */ ETHTOOL_A_C33_PSE_PW_D_STATUS, /* u32 */ + ETHTOOL_A_C33_PSE_PW_CLASS, /* u32 */ + ETHTOOL_A_C33_PSE_ACTUAL_PW, /* u32 */ + ETHTOOL_A_C33_PSE_EXT_STATE, /* u32 */ + ETHTOOL_A_C33_PSE_EXT_SUBSTATE, /* u32 */ + ETHTOOL_A_C33_PSE_AVAIL_PW_LIMIT, /* u32 */ + ETHTOOL_A_C33_PSE_PW_LIMIT_RANGES, /* nest - _C33_PSE_PW_LIMIT_* */ /* add new constants above here */ __ETHTOOL_A_PSE_CNT, |