5 files changed, 128 insertions, 2 deletions

diff --git a/include/linux/mfd/axp20x.h b/include/linux/mfd/axp20x.h
index 3c5aecf1d4b5..b352661d99a1 100644
--- a/include/linux/mfd/axp20x.h
+++ b/include/linux/mfd/axp20x.h
@@ -174,6 +174,9 @@ enum axp20x_variants {
 #define AXP717_ADC_DATA_SEL		0xcd
 #define AXP717_ADC_DATA_H		0xce
 #define AXP717_ADC_DATA_L		0xcf
+#define AXP717_TYPEC_CC_AA_EN		0xe1
+#define AXP717_TYPEC_CC_MODE_CONTROL	0xe3
+#define AXP717_TYPEC_CC_STATUS		0xe7
 
 #define AXP806_STARTUP_SRC		0x00
 #define AXP806_CHIP_ID			0x03
diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h
index 28170ee08898..7ffc904c864c 100644
--- a/include/linux/mfd/rk808.h
+++ b/include/linux/mfd/rk808.h
@@ -340,6 +340,123 @@ enum rk818_reg {
 #define RK818_USB_ILMIN_2000MA		0x7
 #define RK818_USB_CHG_SD_VSEL_MASK	0x70
 
+/* RK801 */
+enum rk801_reg {
+	RK801_ID_DCDC1,
+	RK801_ID_DCDC2,
+	RK801_ID_DCDC4,
+	RK801_ID_DCDC3,
+	RK801_ID_LDO1,
+	RK801_ID_LDO2,
+	RK801_ID_SWITCH,
+	RK801_ID_MAX,
+};
+
+#define RK801_SLP_REG_OFFSET		5
+#define RK801_NUM_REGULATORS		7
+
+#define RK801_HW_SYNC_US		32
+
+/* RK801 Register Definitions */
+#define RK801_ID_MSB			0x00
+#define RK801_ID_LSB			0x01
+#define RK801_OTP_VER_REG		0x02
+#define RK801_POWER_EN0_REG		0x03
+#define RK801_POWER_EN1_REG		0x04
+#define RK801_POWER_SLP_EN_REG		0x05
+#define RK801_POWER_FPWM_EN_REG		0x06
+#define RK801_SLP_LP_CONFIG_REG		0x07
+#define RK801_BUCK_CONFIG_REG		0x08
+#define RK801_BUCK1_ON_VSEL_REG		0x09
+#define RK801_BUCK2_ON_VSEL_REG		0x0a
+#define RK801_BUCK4_ON_VSEL_REG		0x0b
+#define RK801_LDO1_ON_VSEL_REG		0x0c
+#define RK801_LDO2_ON_VSEL_REG		0x0d
+#define RK801_BUCK1_SLP_VSEL_REG	0x0e
+#define RK801_BUCK2_SLP_VSEL_REG	0x0f
+#define RK801_BUCK4_SLP_VSEL_REG	0x10
+#define RK801_LDO1_SLP_VSEL_REG		0x11
+#define RK801_LDO2_SLP_VSEL_REG		0x12
+#define RK801_LDO_SW_IMAX_REG		0x13
+#define RK801_SYS_STS_REG		0x14
+#define RK801_SYS_CFG0_REG		0x15
+#define RK801_SYS_CFG1_REG		0x16
+#define RK801_SYS_CFG2_REG		0x17
+#define RK801_SYS_CFG3_REG		0x18
+#define RK801_SYS_CFG4_REG		0x19
+#define RK801_SLEEP_CFG_REG		0x1a
+#define RK801_ON_SOURCE_REG		0x1b
+#define RK801_OFF_SOURCE_REG		0x1c
+#define RK801_PWRON_KEY_REG		0x1d
+#define RK801_INT_STS0_REG		0x1e
+#define RK801_INT_MASK0_REG		0x1f
+#define RK801_INT_CONFIG_REG		0x20
+#define RK801_CON_BACK1_REG		0x21
+#define RK801_CON_BACK2_REG		0x22
+#define RK801_DATA_CON0_REG		0x23
+#define RK801_DATA_CON1_REG		0x24
+#define RK801_DATA_CON2_REG		0x25
+#define RK801_DATA_CON3_REG		0x26
+#define RK801_POWER_EXIT_SLP_SEQ0_REG	0x27
+#define RK801_POWER_EXIT_SLP_SEQ1_REG	0x28
+#define RK801_POWER_EXIT_SLP_SEQ2_REG	0x29
+#define RK801_POWER_EXIT_SLP_SEQ3_REG	0x2a
+#define RK801_POWER_ENTER_SLP_OR_SHTD_SEQ0_REG	0x2b
+#define RK801_POWER_ENTER_SLP_OR_SHTD_SEQ1_REG	0x2c
+#define RK801_POWER_ENTER_SLP_OR_SHTD_SEQ2_REG	0x2d
+#define RK801_POWER_ENTER_SLP_OR_SHTD_SEQ3_REG	0x2e
+#define RK801_BUCK_DEBUG1_REG		0x2f
+#define RK801_BUCK_DEBUG2_REG		0x30
+#define RK801_BUCK_DEBUG3_REG		0x31
+#define RK801_BUCK_DEBUG4_REG		0x32
+#define RK801_BUCK_DEBUG5_REG		0x33
+#define RK801_BUCK_DEBUG7_REG		0x34
+#define RK801_OTP_EN_CON_REG		0x35
+#define RK801_TEST_CON_REG		0x36
+#define RK801_EFUSE_CONTROL_REG		0x37
+#define RK801_SYS_CFG3_OTP_REG		0x38
+
+/* RK801 IRQ Definitions */
+#define RK801_IRQ_PWRON_FALL		0
+#define RK801_IRQ_PWRON_RISE		1
+#define RK801_IRQ_PWRON			2
+#define RK801_IRQ_PWRON_LP		3
+#define RK801_IRQ_HOTDIE		4
+#define RK801_IRQ_VDC_RISE		5
+#define RK801_IRQ_VDC_FALL		6
+#define RK801_IRQ_PWRON_FALL_MSK	BIT(0)
+#define RK801_IRQ_PWRON_RISE_MSK	BIT(1)
+#define RK801_IRQ_PWRON_MSK		BIT(2)
+#define RK801_IRQ_PWRON_LP_MSK		BIT(3)
+#define RK801_IRQ_HOTDIE_MSK		BIT(4)
+#define RK801_IRQ_VDC_RISE_MSK		BIT(5)
+#define RK801_IRQ_VDC_FALL_MSK		BIT(6)
+/* RK801_SLP_LP_CONFIG_REG */
+#define RK801_BUCK_SLP_LP_EN		BIT(3)
+#define RK801_PLDO_SLP_LP_EN		BIT(1)
+#define RK801_SLP_LP_MASK		(RK801_PLDO_SLP_LP_EN | RK801_BUCK_SLP_LP_EN)
+/* RK801_SLEEP_CFG_REG */
+#define RK801_SLEEP_FUN_MSK		0x3
+#define RK801_NONE_FUN			0x0
+#define RK801_SLEEP_FUN			0x1
+#define RK801_SHUTDOWN_FUN		0x2
+#define RK801_RESET_FUN			0x3
+/* RK801_SYS_CFG2_REG */
+#define RK801_SLEEP_POL_MSK		BIT(1)
+#define RK801_SLEEP_ACT_H		BIT(1)
+#define RK801_SLEEP_ACT_L		0
+#define RK801_RST_MSK			(0x3 << 4)
+#define RK801_RST_RESTART_PMU		(0x0 << 4)
+#define RK801_RST_RESTART_REG		(0x1 << 4)
+#define RK801_RST_RESTART_REG_RESETB	(0x2 << 4)
+/* RK801_INT_CONFIG_REG */
+#define RK801_INT_POL_MSK		BIT(1)
+#define RK801_INT_ACT_H			BIT(1)
+#define RK801_INT_ACT_L			0
+#define RK801_FPWM_MODE			1
+#define RK801_AUTO_PWM_MODE		0
+#define RK801_PLDO_HRDEC_EN		BIT(6)
+
 /* RK805 */
 enum rk805_reg {
 	RK805_ID_DCDC1,
@@ -1332,6 +1449,7 @@ enum {
 };
 
 enum {
+	RK801_ID = 0x8010,
 	RK805_ID = 0x8050,
 	RK806_ID = 0x8060,
 	RK808_ID = 0x0000,
diff --git a/include/linux/mfd/rohm-bd71828.h b/include/linux/mfd/rohm-bd71828.h
index 73a71ef69152..39fe275a8117 100644
--- a/include/linux/mfd/rohm-bd71828.h
+++ b/include/linux/mfd/rohm-bd71828.h
@@ -249,6 +249,8 @@ enum {
 #define BD71828_REG_BATCAP_MON_LIMIT_U	0xcc
 #define BD71828_REG_CONF		0x64
 
+#define BD71828_REG_ILIM_STAT		0x6d
+#define BD71828_REG_DCIN_SET		0x70
 #define BD71828_REG_DCIN_CLPS		0x71
 
 #define BD71828_REG_MEAS_CLEAR		0xaf
diff --git a/include/linux/mfd/tps6105x.h b/include/linux/mfd/tps6105x.h
index b1313411ef09..94e699896240 100644
--- a/include/linux/mfd/tps6105x.h
+++ b/include/linux/mfd/tps6105x.h
@@ -53,7 +53,7 @@
 /**
  * enum tps6105x_mode - desired mode for the TPS6105x
  * @TPS6105X_MODE_SHUTDOWN: this instance is inactive, not used for anything
- * @TPS61905X_MODE_TORCH: this instance is used as a LED, usually a while
+ * @TPS6105X_MODE_TORCH: this instance is used as a LED, usually a while
  *	LED, for example as backlight or flashlight. If this is set, the
  *	TPS6105X will register to the LED framework
  * @TPS6105X_MODE_TORCH_FLASH: this instance is used as a flashgun, usually
@@ -82,7 +82,8 @@ struct tps6105x_platform_data {
 
 /**
  * struct tps6105x - state holder for the TPS6105x drivers
- * @i2c_client: corresponding I2C client
+ * @pdata: associated platform data
+ * @client: corresponding I2C client
  * @regulator: regulator device if used in voltage mode
  * @regmap: used for i2c communcation on accessing registers
  */
diff --git a/include/linux/mfd/tps65219.h b/include/linux/mfd/tps65219.h
index 55234e771ba7..3abf937191d0 100644
--- a/include/linux/mfd/tps65219.h
+++ b/include/linux/mfd/tps65219.h
@@ -149,6 +149,8 @@ enum pmic_id {
 #define TPS65215_ENABLE_LDO2_EN_MASK                    BIT(5)
 #define TPS65214_ENABLE_LDO1_EN_MASK			BIT(5)
 #define TPS65219_ENABLE_LDO4_EN_MASK			BIT(6)
+/* Register Unlock */
+#define TPS65214_LOCK_ACCESS_CMD			0x5a
 /* power ON-OFF sequence slot */
 #define TPS65219_BUCKS_LDOS_SEQUENCE_OFF_SLOT_MASK	GENMASK(3, 0)
 #define TPS65219_BUCKS_LDOS_SEQUENCE_ON_SLOT_MASK	GENMASK(7, 4)