diff options
Diffstat (limited to 'include')
| -rw-r--r-- | include/asm-arm/arch-s3c2410/uncompress.h | 63 |
1 files changed, 48 insertions, 15 deletions
diff --git a/include/asm-arm/arch-s3c2410/uncompress.h b/include/asm-arm/arch-s3c2410/uncompress.h index fa240af7f591..ad4252e27799 100644 --- a/include/asm-arm/arch-s3c2410/uncompress.h +++ b/include/asm-arm/arch-s3c2410/uncompress.h @@ -15,6 +15,7 @@ * 12-Mar-2004 BJD Updated header protection * 12-Oct-2004 BJD Take account of debug uart configuration * 15-Nov-2004 BJD Fixed uart configuration + * 22-Feb-2005 BJD Added watchdog to uncompress */ #ifndef __ASM_ARCH_UNCOMPRESS_H @@ -25,12 +26,16 @@ /* defines for UART registers */ #include "asm/arch/regs-serial.h" #include "asm/arch/regs-gpio.h" +#include "asm/arch/regs-watchdog.h" #include <asm/arch/map.h> /* working in physical space... */ #undef S3C2410_GPIOREG +#undef S3C2410_WDOGREG + #define S3C2410_GPIOREG(x) ((S3C2410_PA_GPIO + (x))) +#define S3C2410_WDOGREG(x) ((S3C2410_PA_WATCHDOG + (x))) /* how many bytes we allow into the FIFO at a time in FIFO mode */ #define FIFO_MAX (14) @@ -56,21 +61,6 @@ uart_rd(unsigned int reg) } -/* currently we do not need the watchdog... */ -#define arch_decomp_wdog() - - -static void error(char *err); - -static void -arch_decomp_setup(void) -{ - /* we may need to setup the uart(s) here if we are not running - * on an BAST... the BAST will have left the uarts configured - * after calling linux. - */ -} - /* we can deal with the case the UARTs are being run * in FIFO mode, so that we don't hold up our execution * waiting for tx to happen... @@ -122,4 +112,47 @@ putstr(const char *ptr) } } +/* CONFIG_S3C2410_BOOT_WATCHDOG + * + * Simple boot-time watchdog setup, to reboot the system if there is + * any problem with the boot process +*/ + +#ifdef CONFIG_S3C2410_BOOT_WATCHDOG + +#define WDOG_COUNT (0xff00) + +#define __raw_writel(d,ad) do { *((volatile unsigned int *)(ad)) = (d); } while(0) + +static inline void arch_decomp_wdog(void) +{ + __raw_writel(WDOG_COUNT, S3C2410_WTCNT); +} + +static void arch_decomp_wdog_start(void) +{ + __raw_writel(WDOG_COUNT, S3C2410_WTDAT); + __raw_writel(WDOG_COUNT, S3C2410_WTCNT); + __raw_writel(S3C2410_WTCON_ENABLE | S3C2410_WTCON_DIV128 | S3C2410_WTCON_RSTEN | S3C2410_WTCON_PRESCALE(0x40), S3C2410_WTCON); +} + +#else +#define arch_decomp_wdog_start() +#define arch_decomp_wdog() +#endif + +static void error(char *err); + +static void +arch_decomp_setup(void) +{ + /* we may need to setup the uart(s) here if we are not running + * on an BAST... the BAST will have left the uarts configured + * after calling linux. + */ + + arch_decomp_wdog_start(); +} + + #endif /* __ASM_ARCH_UNCOMPRESS_H */ |