diff options
Diffstat (limited to 'tools/include/uapi')
| -rw-r--r-- | tools/include/uapi/asm-generic/unistd.h | 5 | ||||
| -rw-r--r-- | tools/include/uapi/drm/drm.h | 18 | ||||
| -rw-r--r-- | tools/include/uapi/linux/bpf.h | 165 | ||||
| -rw-r--r-- | tools/include/uapi/linux/btf.h | 3 | ||||
| -rw-r--r-- | tools/include/uapi/linux/if_link.h | 295 | ||||
| -rw-r--r-- | tools/include/uapi/linux/kvm.h | 17 | ||||
| -rw-r--r-- | tools/include/uapi/linux/perf_event.h | 5 |
7 files changed, 469 insertions, 39 deletions
diff --git a/tools/include/uapi/asm-generic/unistd.h b/tools/include/uapi/asm-generic/unistd.h index 4557a8b6086f..1c48b0ae3ba3 100644 --- a/tools/include/uapi/asm-generic/unistd.h +++ b/tools/include/uapi/asm-generic/unistd.h @@ -883,8 +883,11 @@ __SYSCALL(__NR_process_mrelease, sys_process_mrelease) #define __NR_futex_waitv 449 __SYSCALL(__NR_futex_waitv, sys_futex_waitv) +#define __NR_set_mempolicy_home_node 450 +__SYSCALL(__NR_set_mempolicy_home_node, sys_set_mempolicy_home_node) + #undef __NR_syscalls -#define __NR_syscalls 450 +#define __NR_syscalls 451 /* * 32 bit systems traditionally used different diff --git a/tools/include/uapi/drm/drm.h b/tools/include/uapi/drm/drm.h index 3b810b53ba8b..642808520d92 100644 --- a/tools/include/uapi/drm/drm.h +++ b/tools/include/uapi/drm/drm.h @@ -1096,6 +1096,24 @@ extern "C" { #define DRM_IOCTL_SYNCOBJ_TRANSFER DRM_IOWR(0xCC, struct drm_syncobj_transfer) #define DRM_IOCTL_SYNCOBJ_TIMELINE_SIGNAL DRM_IOWR(0xCD, struct drm_syncobj_timeline_array) +/** + * DRM_IOCTL_MODE_GETFB2 - Get framebuffer metadata. + * + * This queries metadata about a framebuffer. User-space fills + * &drm_mode_fb_cmd2.fb_id as the input, and the kernels fills the rest of the + * struct as the output. + * + * If the client is DRM master or has &CAP_SYS_ADMIN, &drm_mode_fb_cmd2.handles + * will be filled with GEM buffer handles. Planes are valid until one has a + * zero handle -- this can be used to compute the number of planes. + * + * Otherwise, &drm_mode_fb_cmd2.handles will be zeroed and planes are valid + * until one has a zero &drm_mode_fb_cmd2.pitches. + * + * If the framebuffer has a format modifier, &DRM_MODE_FB_MODIFIERS will be set + * in &drm_mode_fb_cmd2.flags and &drm_mode_fb_cmd2.modifier will contain the + * modifier. Otherwise, user-space must ignore &drm_mode_fb_cmd2.modifier. + */ #define DRM_IOCTL_MODE_GETFB2 DRM_IOWR(0xCE, struct drm_mode_fb_cmd2) /* diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h index ba5af15e25f5..b0383d371b9a 100644 --- a/tools/include/uapi/linux/bpf.h +++ b/tools/include/uapi/linux/bpf.h @@ -1342,8 +1342,10 @@ union bpf_attr { /* or valid module BTF object fd or 0 to attach to vmlinux */ __u32 attach_btf_obj_fd; }; - __u32 :32; /* pad */ + __u32 core_relo_cnt; /* number of bpf_core_relo */ __aligned_u64 fd_array; /* array of FDs */ + __aligned_u64 core_relos; + __u32 core_relo_rec_size; /* sizeof(struct bpf_core_relo) */ }; struct { /* anonymous struct used by BPF_OBJ_* commands */ @@ -1744,7 +1746,7 @@ union bpf_attr { * if the maximum number of tail calls has been reached for this * chain of programs. This limit is defined in the kernel by the * macro **MAX_TAIL_CALL_CNT** (not accessible to user space), - * which is currently set to 32. + * which is currently set to 33. * Return * 0 on success, or a negative error in case of failure. * @@ -4938,6 +4940,84 @@ union bpf_attr { * **-ENOENT** if symbol is not found. * * **-EPERM** if caller does not have permission to obtain kernel address. + * + * long bpf_find_vma(struct task_struct *task, u64 addr, void *callback_fn, void *callback_ctx, u64 flags) + * Description + * Find vma of *task* that contains *addr*, call *callback_fn* + * function with *task*, *vma*, and *callback_ctx*. + * The *callback_fn* should be a static function and + * the *callback_ctx* should be a pointer to the stack. + * The *flags* is used to control certain aspects of the helper. + * Currently, the *flags* must be 0. + * + * The expected callback signature is + * + * long (\*callback_fn)(struct task_struct \*task, struct vm_area_struct \*vma, void \*callback_ctx); + * + * Return + * 0 on success. + * **-ENOENT** if *task->mm* is NULL, or no vma contains *addr*. + * **-EBUSY** if failed to try lock mmap_lock. + * **-EINVAL** for invalid **flags**. + * + * long bpf_loop(u32 nr_loops, void *callback_fn, void *callback_ctx, u64 flags) + * Description + * For **nr_loops**, call **callback_fn** function + * with **callback_ctx** as the context parameter. + * The **callback_fn** should be a static function and + * the **callback_ctx** should be a pointer to the stack. + * The **flags** is used to control certain aspects of the helper. + * Currently, the **flags** must be 0. Currently, nr_loops is + * limited to 1 << 23 (~8 million) loops. + * + * long (\*callback_fn)(u32 index, void \*ctx); + * + * where **index** is the current index in the loop. The index + * is zero-indexed. + * + * If **callback_fn** returns 0, the helper will continue to the next + * loop. If return value is 1, the helper will skip the rest of + * the loops and return. Other return values are not used now, + * and will be rejected by the verifier. + * + * Return + * The number of loops performed, **-EINVAL** for invalid **flags**, + * **-E2BIG** if **nr_loops** exceeds the maximum number of loops. + * + * long bpf_strncmp(const char *s1, u32 s1_sz, const char *s2) + * Description + * Do strncmp() between **s1** and **s2**. **s1** doesn't need + * to be null-terminated and **s1_sz** is the maximum storage + * size of **s1**. **s2** must be a read-only string. + * Return + * An integer less than, equal to, or greater than zero + * if the first **s1_sz** bytes of **s1** is found to be + * less than, to match, or be greater than **s2**. + * + * long bpf_get_func_arg(void *ctx, u32 n, u64 *value) + * Description + * Get **n**-th argument (zero based) of the traced function (for tracing programs) + * returned in **value**. + * + * Return + * 0 on success. + * **-EINVAL** if n >= arguments count of traced function. + * + * long bpf_get_func_ret(void *ctx, u64 *value) + * Description + * Get return value of the traced function (for tracing programs) + * in **value**. + * + * Return + * 0 on success. + * **-EOPNOTSUPP** for tracing programs other than BPF_TRACE_FEXIT or BPF_MODIFY_RETURN. + * + * long bpf_get_func_arg_cnt(void *ctx) + * Description + * Get number of arguments of the traced function (for tracing programs). + * + * Return + * The number of arguments of the traced function. */ #define __BPF_FUNC_MAPPER(FN) \ FN(unspec), \ @@ -5120,6 +5200,12 @@ union bpf_attr { FN(trace_vprintk), \ FN(skc_to_unix_sock), \ FN(kallsyms_lookup_name), \ + FN(find_vma), \ + FN(loop), \ + FN(strncmp), \ + FN(get_func_arg), \ + FN(get_func_ret), \ + FN(get_func_arg_cnt), \ /* */ /* integer value in 'imm' field of BPF_CALL instruction selects which helper @@ -6296,6 +6382,7 @@ struct bpf_sk_lookup { __u32 local_ip4; /* Network byte order */ __u32 local_ip6[4]; /* Network byte order */ __u32 local_port; /* Host byte order */ + __u32 ingress_ifindex; /* The arriving interface. Determined by inet_iif. */ }; /* @@ -6328,4 +6415,78 @@ enum { BTF_F_ZERO = (1ULL << 3), }; +/* bpf_core_relo_kind encodes which aspect of captured field/type/enum value + * has to be adjusted by relocations. It is emitted by llvm and passed to + * libbpf and later to the kernel. + */ +enum bpf_core_relo_kind { + BPF_CORE_FIELD_BYTE_OFFSET = 0, /* field byte offset */ + BPF_CORE_FIELD_BYTE_SIZE = 1, /* field size in bytes */ + BPF_CORE_FIELD_EXISTS = 2, /* field existence in target kernel */ + BPF_CORE_FIELD_SIGNED = 3, /* field signedness (0 - unsigned, 1 - signed) */ + BPF_CORE_FIELD_LSHIFT_U64 = 4, /* bitfield-specific left bitshift */ + BPF_CORE_FIELD_RSHIFT_U64 = 5, /* bitfield-specific right bitshift */ + BPF_CORE_TYPE_ID_LOCAL = 6, /* type ID in local BPF object */ + BPF_CORE_TYPE_ID_TARGET = 7, /* type ID in target kernel */ + BPF_CORE_TYPE_EXISTS = 8, /* type existence in target kernel */ + BPF_CORE_TYPE_SIZE = 9, /* type size in bytes */ + BPF_CORE_ENUMVAL_EXISTS = 10, /* enum value existence in target kernel */ + BPF_CORE_ENUMVAL_VALUE = 11, /* enum value integer value */ +}; + +/* + * "struct bpf_core_relo" is used to pass relocation data form LLVM to libbpf + * and from libbpf to the kernel. + * + * CO-RE relocation captures the following data: + * - insn_off - instruction offset (in bytes) within a BPF program that needs + * its insn->imm field to be relocated with actual field info; + * - type_id - BTF type ID of the "root" (containing) entity of a relocatable + * type or field; + * - access_str_off - offset into corresponding .BTF string section. String + * interpretation depends on specific relocation kind: + * - for field-based relocations, string encodes an accessed field using + * a sequence of field and array indices, separated by colon (:). It's + * conceptually very close to LLVM's getelementptr ([0]) instruction's + * arguments for identifying offset to a field. + * - for type-based relocations, strings is expected to be just "0"; + * - for enum value-based relocations, string contains an index of enum + * value within its enum type; + * - kind - one of enum bpf_core_relo_kind; + * + * Example: + * struct sample { + * int a; + * struct { + * int b[10]; + * }; + * }; + * + * struct sample *s = ...; + * int *x = &s->a; // encoded as "0:0" (a is field #0) + * int *y = &s->b[5]; // encoded as "0:1:0:5" (anon struct is field #1, + * // b is field #0 inside anon struct, accessing elem #5) + * int *z = &s[10]->b; // encoded as "10:1" (ptr is used as an array) + * + * type_id for all relocs in this example will capture BTF type id of + * `struct sample`. + * + * Such relocation is emitted when using __builtin_preserve_access_index() + * Clang built-in, passing expression that captures field address, e.g.: + * + * bpf_probe_read(&dst, sizeof(dst), + * __builtin_preserve_access_index(&src->a.b.c)); + * + * In this case Clang will emit field relocation recording necessary data to + * be able to find offset of embedded `a.b.c` field within `src` struct. + * + * [0] https://llvm.org/docs/LangRef.html#getelementptr-instruction + */ +struct bpf_core_relo { + __u32 insn_off; + __u32 type_id; + __u32 access_str_off; + enum bpf_core_relo_kind kind; +}; + #endif /* _UAPI__LINUX_BPF_H__ */ diff --git a/tools/include/uapi/linux/btf.h b/tools/include/uapi/linux/btf.h index deb12f755f0f..b0d8fea1951d 100644 --- a/tools/include/uapi/linux/btf.h +++ b/tools/include/uapi/linux/btf.h @@ -43,7 +43,7 @@ struct btf_type { * "size" tells the size of the type it is describing. * * "type" is used by PTR, TYPEDEF, VOLATILE, CONST, RESTRICT, - * FUNC, FUNC_PROTO, VAR and DECL_TAG. + * FUNC, FUNC_PROTO, VAR, DECL_TAG and TYPE_TAG. * "type" is a type_id referring to another type. */ union { @@ -75,6 +75,7 @@ enum { BTF_KIND_DATASEC = 15, /* Section */ BTF_KIND_FLOAT = 16, /* Floating point */ BTF_KIND_DECL_TAG = 17, /* Decl Tag */ + BTF_KIND_TYPE_TAG = 18, /* Type Tag */ NR_BTF_KINDS, BTF_KIND_MAX = NR_BTF_KINDS - 1, diff --git a/tools/include/uapi/linux/if_link.h b/tools/include/uapi/linux/if_link.h index b3610fdd1fee..6218f93f5c1a 100644 --- a/tools/include/uapi/linux/if_link.h +++ b/tools/include/uapi/linux/if_link.h @@ -7,24 +7,23 @@ /* This struct should be in sync with struct rtnl_link_stats64 */ struct rtnl_link_stats { - __u32 rx_packets; /* total packets received */ - __u32 tx_packets; /* total packets transmitted */ - __u32 rx_bytes; /* total bytes received */ - __u32 tx_bytes; /* total bytes transmitted */ - __u32 rx_errors; /* bad packets received */ - __u32 tx_errors; /* packet transmit problems */ - __u32 rx_dropped; /* no space in linux buffers */ - __u32 tx_dropped; /* no space available in linux */ - __u32 multicast; /* multicast packets received */ + __u32 rx_packets; + __u32 tx_packets; + __u32 rx_bytes; + __u32 tx_bytes; + __u32 rx_errors; + __u32 tx_errors; + __u32 rx_dropped; + __u32 tx_dropped; + __u32 multicast; __u32 collisions; - /* detailed rx_errors: */ __u32 rx_length_errors; - __u32 rx_over_errors; /* receiver ring buff overflow */ - __u32 rx_crc_errors; /* recved pkt with crc error */ - __u32 rx_frame_errors; /* recv'd frame alignment error */ - __u32 rx_fifo_errors; /* recv'r fifo overrun */ - __u32 rx_missed_errors; /* receiver missed packet */ + __u32 rx_over_errors; + __u32 rx_crc_errors; + __u32 rx_frame_errors; + __u32 rx_fifo_errors; + __u32 rx_missed_errors; /* detailed tx_errors */ __u32 tx_aborted_errors; @@ -37,29 +36,201 @@ struct rtnl_link_stats { __u32 rx_compressed; __u32 tx_compressed; - __u32 rx_nohandler; /* dropped, no handler found */ + __u32 rx_nohandler; }; -/* The main device statistics structure */ +/** + * struct rtnl_link_stats64 - The main device statistics structure. + * + * @rx_packets: Number of good packets received by the interface. + * For hardware interfaces counts all good packets received from the device + * by the host, including packets which host had to drop at various stages + * of processing (even in the driver). + * + * @tx_packets: Number of packets successfully transmitted. + * For hardware interfaces counts packets which host was able to successfully + * hand over to the device, which does not necessarily mean that packets + * had been successfully transmitted out of the device, only that device + * acknowledged it copied them out of host memory. + * + * @rx_bytes: Number of good received bytes, corresponding to @rx_packets. + * + * For IEEE 802.3 devices should count the length of Ethernet Frames + * excluding the FCS. + * + * @tx_bytes: Number of good transmitted bytes, corresponding to @tx_packets. + * + * For IEEE 802.3 devices should count the length of Ethernet Frames + * excluding the FCS. + * + * @rx_errors: Total number of bad packets received on this network device. + * This counter must include events counted by @rx_length_errors, + * @rx_crc_errors, @rx_frame_errors and other errors not otherwise + * counted. + * + * @tx_errors: Total number of transmit problems. + * This counter must include events counter by @tx_aborted_errors, + * @tx_carrier_errors, @tx_fifo_errors, @tx_heartbeat_errors, + * @tx_window_errors and other errors not otherwise counted. + * + * @rx_dropped: Number of packets received but not processed, + * e.g. due to lack of resources or unsupported protocol. + * For hardware interfaces this counter may include packets discarded + * due to L2 address filtering but should not include packets dropped + * by the device due to buffer exhaustion which are counted separately in + * @rx_missed_errors (since procfs folds those two counters together). + * + * @tx_dropped: Number of packets dropped on their way to transmission, + * e.g. due to lack of resources. + * + * @multicast: Multicast packets received. + * For hardware interfaces this statistic is commonly calculated + * at the device level (unlike @rx_packets) and therefore may include + * packets which did not reach the host. + * + * For IEEE 802.3 devices this counter may be equivalent to: + * + * - 30.3.1.1.21 aMulticastFramesReceivedOK + * + * @collisions: Number of collisions during packet transmissions. + * + * @rx_length_errors: Number of packets dropped due to invalid length. + * Part of aggregate "frame" errors in `/proc/net/dev`. + * + * For IEEE 802.3 devices this counter should be equivalent to a sum + * of the following attributes: + * + * - 30.3.1.1.23 aInRangeLengthErrors + * - 30.3.1.1.24 aOutOfRangeLengthField + * - 30.3.1.1.25 aFrameTooLongErrors + * + * @rx_over_errors: Receiver FIFO overflow event counter. + * + * Historically the count of overflow events. Such events may be + * reported in the receive descriptors or via interrupts, and may + * not correspond one-to-one with dropped packets. + * + * The recommended interpretation for high speed interfaces is - + * number of packets dropped because they did not fit into buffers + * provided by the host, e.g. packets larger than MTU or next buffer + * in the ring was not available for a scatter transfer. + * + * Part of aggregate "frame" errors in `/proc/net/dev`. + * + * This statistics was historically used interchangeably with + * @rx_fifo_errors. + * + * This statistic corresponds to hardware events and is not commonly used + * on software devices. + * + * @rx_crc_errors: Number of packets received with a CRC error. + * Part of aggregate "frame" errors in `/proc/net/dev`. + * + * For IEEE 802.3 devices this counter must be equivalent to: + * + * - 30.3.1.1.6 aFrameCheckSequenceErrors + * + * @rx_frame_errors: Receiver frame alignment errors. + * Part of aggregate "frame" errors in `/proc/net/dev`. + * + * For IEEE 802.3 devices this counter should be equivalent to: + * + * - 30.3.1.1.7 aAlignmentErrors + * + * @rx_fifo_errors: Receiver FIFO error counter. + * + * Historically the count of overflow events. Those events may be + * reported in the receive descriptors or via interrupts, and may + * not correspond one-to-one with dropped packets. + * + * This statistics was used interchangeably with @rx_over_errors. + * Not recommended for use in drivers for high speed interfaces. + * + * This statistic is used on software devices, e.g. to count software + * packet queue overflow (can) or sequencing errors (GRE). + * + * @rx_missed_errors: Count of packets missed by the host. + * Folded into the "drop" counter in `/proc/net/dev`. + * + * Counts number of packets dropped by the device due to lack + * of buffer space. This usually indicates that the host interface + * is slower than the network interface, or host is not keeping up + * with the receive packet rate. + * + * This statistic corresponds to hardware events and is not used + * on software devices. + * + * @tx_aborted_errors: + * Part of aggregate "carrier" errors in `/proc/net/dev`. + * For IEEE 802.3 devices capable of half-duplex operation this counter + * must be equivalent to: + * + * - 30.3.1.1.11 aFramesAbortedDueToXSColls + * + * High speed interfaces may use this counter as a general device + * discard counter. + * + * @tx_carrier_errors: Number of frame transmission errors due to loss + * of carrier during transmission. + * Part of aggregate "carrier" errors in `/proc/net/dev`. + * + * For IEEE 802.3 devices this counter must be equivalent to: + * + * - 30.3.1.1.13 aCarrierSenseErrors + * + * @tx_fifo_errors: Number of frame transmission errors due to device + * FIFO underrun / underflow. This condition occurs when the device + * begins transmission of a frame but is unable to deliver the + * entire frame to the transmitter in time for transmission. + * Part of aggregate "carrier" errors in `/proc/net/dev`. + * + * @tx_heartbeat_errors: Number of Heartbeat / SQE Test errors for + * old half-duplex Ethernet. + * Part of aggregate "carrier" errors in `/proc/net/dev`. + * + * For IEEE 802.3 devices possibly equivalent to: + * + * - 30.3.2.1.4 aSQETestErrors + * + * @tx_window_errors: Number of frame transmission errors due + * to late collisions (for Ethernet - after the first 64B of transmission). + * Part of aggregate "carrier" errors in `/proc/net/dev`. + * + * For IEEE 802.3 devices this counter must be equivalent to: + * + * - 30.3.1.1.10 aLateCollisions + * + * @rx_compressed: Number of correctly received compressed packets. + * This counters is only meaningful for interfaces which support + * packet compression (e.g. CSLIP, PPP). + * + * @tx_compressed: Number of transmitted compressed packets. + * This counters is only meaningful for interfaces which support + * packet compression (e.g. CSLIP, PPP). + * + * @rx_nohandler: Number of packets received on the interface + * but dropped by the networking stack because the device is + * not designated to receive packets (e.g. backup link in a bond). + */ struct rtnl_link_stats64 { - __u64 rx_packets; /* total packets received */ - __u64 tx_packets; /* total packets transmitted */ - __u64 rx_bytes; /* total bytes received */ - __u64 tx_bytes; /* total bytes transmitted */ - __u64 rx_errors; /* bad packets received */ - __u64 tx_errors; /* packet transmit problems */ - __u64 rx_dropped; /* no space in linux buffers */ - __u64 tx_dropped; /* no space available in linux */ - __u64 multicast; /* multicast packets received */ + __u64 rx_packets; + __u64 tx_packets; + __u64 rx_bytes; + __u64 tx_bytes; + __u64 rx_errors; + __u64 tx_errors; + __u64 rx_dropped; + __u64 tx_dropped; + __u64 multicast; __u64 collisions; /* detailed rx_errors: */ __u64 rx_length_errors; - __u64 rx_over_errors; /* receiver ring buff overflow */ - __u64 rx_crc_errors; /* recved pkt with crc error */ - __u64 rx_frame_errors; /* recv'd frame alignment error */ - __u64 rx_fifo_errors; /* recv'r fifo overrun */ - __u64 rx_missed_errors; /* receiver missed packet */ + __u64 rx_over_errors; + __u64 rx_crc_errors; + __u64 rx_frame_errors; + __u64 rx_fifo_errors; + __u64 rx_missed_errors; /* detailed tx_errors */ __u64 tx_aborted_errors; @@ -71,8 +242,7 @@ struct rtnl_link_stats64 { /* for cslip etc */ __u64 rx_compressed; __u64 tx_compressed; - - __u64 rx_nohandler; /* dropped, no handler found */ + __u64 rx_nohandler; }; /* The struct should be in sync with struct ifmap */ @@ -170,12 +340,30 @@ enum { IFLA_PROP_LIST, IFLA_ALT_IFNAME, /* Alternative ifname */ IFLA_PERM_ADDRESS, + IFLA_PROTO_DOWN_REASON, + + /* device (sysfs) name as parent, used instead + * of IFLA_LINK where there's no parent netdev + */ + IFLA_PARENT_DEV_NAME, + IFLA_PARENT_DEV_BUS_NAME, + IFLA_GRO_MAX_SIZE, + __IFLA_MAX }; #define IFLA_MAX (__IFLA_MAX - 1) +enum { + IFLA_PROTO_DOWN_REASON_UNSPEC, + IFLA_PROTO_DOWN_REASON_MASK, /* u32, mask for reason bits */ + IFLA_PROTO_DOWN_REASON_VALUE, /* u32, reason bit value */ + + __IFLA_PROTO_DOWN_REASON_CNT, + IFLA_PROTO_DOWN_REASON_MAX = __IFLA_PROTO_DOWN_REASON_CNT - 1 +}; + /* backwards compatibility for userspace */ #ifndef __KERNEL__ #define IFLA_RTA(r) ((struct rtattr*)(((char*)(r)) + NLMSG_ALIGN(sizeof(struct ifinfomsg)))) @@ -293,6 +481,7 @@ enum { IFLA_BR_MCAST_MLD_VERSION, IFLA_BR_VLAN_STATS_PER_PORT, IFLA_BR_MULTI_BOOLOPT, + IFLA_BR_MCAST_QUERIER_STATE, __IFLA_BR_MAX, }; @@ -346,6 +535,8 @@ enum { IFLA_BRPORT_BACKUP_PORT, IFLA_BRPORT_MRP_RING_OPEN, IFLA_BRPORT_MRP_IN_OPEN, + IFLA_BRPORT_MCAST_EHT_HOSTS_LIMIT, + IFLA_BRPORT_MCAST_EHT_HOSTS_CNT, __IFLA_BRPORT_MAX }; #define IFLA_BRPORT_MAX (__IFLA_BRPORT_MAX - 1) @@ -433,6 +624,7 @@ enum macvlan_macaddr_mode { }; #define MACVLAN_FLAG_NOPROMISC 1 +#define MACVLAN_FLAG_NODST 2 /* skip dst macvlan if matching src macvlan */ /* VRF section */ enum { @@ -597,6 +789,18 @@ enum ifla_geneve_df { GENEVE_DF_MAX = __GENEVE_DF_END - 1, }; +/* Bareudp section */ +enum { + IFLA_BAREUDP_UNSPEC, + IFLA_BAREUDP_PORT, + IFLA_BAREUDP_ETHERTYPE, + IFLA_BAREUDP_SRCPORT_MIN, + IFLA_BAREUDP_MULTIPROTO_MODE, + __IFLA_BAREUDP_MAX +}; + +#define IFLA_BAREUDP_MAX (__IFLA_BAREUDP_MAX - 1) + /* PPP section */ enum { IFLA_PPP_UNSPEC, @@ -655,6 +859,7 @@ enum { IFLA_BOND_TLB_DYNAMIC_LB, IFLA_BOND_PEER_NOTIF_DELAY, IFLA_BOND_AD_LACP_ACTIVE, + IFLA_BOND_MISSED_MAX, __IFLA_BOND_MAX, }; @@ -899,7 +1104,14 @@ enum { #define IFLA_IPOIB_MAX (__IFLA_IPOIB_MAX - 1) -/* HSR section */ +/* HSR/PRP section, both uses same interface */ + +/* Different redundancy protocols for hsr device */ +enum { + HSR_PROTOCOL_HSR, + HSR_PROTOCOL_PRP, + HSR_PROTOCOL_MAX, +}; enum { IFLA_HSR_UNSPEC, @@ -909,6 +1121,9 @@ enum { IFLA_HSR_SUPERVISION_ADDR, /* Supervision frame multicast addr */ IFLA_HSR_SEQ_NR, IFLA_HSR_VERSION, /* HSR version */ + IFLA_HSR_PROTOCOL, /* Indicate different protocol than + * HSR. For example PRP. + */ __IFLA_HSR_MAX, }; @@ -1033,6 +1248,8 @@ enum { #define RMNET_FLAGS_INGRESS_MAP_COMMANDS (1U << 1) #define RMNET_FLAGS_INGRESS_MAP_CKSUMV4 (1U << 2) #define RMNET_FLAGS_EGRESS_MAP_CKSUMV4 (1U << 3) +#define RMNET_FLAGS_INGRESS_MAP_CKSUMV5 (1U << 4) +#define RMNET_FLAGS_EGRESS_MAP_CKSUMV5 (1U << 5) enum { IFLA_RMNET_UNSPEC, @@ -1048,4 +1265,14 @@ struct ifla_rmnet_flags { __u32 mask; }; +/* MCTP section */ + +enum { + IFLA_MCTP_UNSPEC, + IFLA_MCTP_NET, + __IFLA_MCTP_MAX, +}; + +#define IFLA_MCTP_MAX (__IFLA_MCTP_MAX - 1) + #endif /* _UAPI_LINUX_IF_LINK_H */ diff --git a/tools/include/uapi/linux/kvm.h b/tools/include/uapi/linux/kvm.h index 1daa45268de2..b46bcdb0cab1 100644 --- a/tools/include/uapi/linux/kvm.h +++ b/tools/include/uapi/linux/kvm.h @@ -1131,6 +1131,9 @@ struct kvm_ppc_resize_hpt { #define KVM_CAP_EXIT_ON_EMULATION_FAILURE 204 #define KVM_CAP_ARM_MTE 205 #define KVM_CAP_VM_MOVE_ENC_CONTEXT_FROM 206 +#define KVM_CAP_VM_GPA_BITS 207 +#define KVM_CAP_XSAVE2 208 +#define KVM_CAP_SYS_ATTRIBUTES 209 #ifdef KVM_CAP_IRQ_ROUTING @@ -1162,11 +1165,20 @@ struct kvm_irq_routing_hv_sint { __u32 sint; }; +struct kvm_irq_routing_xen_evtchn { + __u32 port; + __u32 vcpu; + __u32 priority; +}; + +#define KVM_IRQ_ROUTING_XEN_EVTCHN_PRIO_2LEVEL ((__u32)(-1)) + /* gsi routing entry types */ #define KVM_IRQ_ROUTING_IRQCHIP 1 #define KVM_IRQ_ROUTING_MSI 2 #define KVM_IRQ_ROUTING_S390_ADAPTER 3 #define KVM_IRQ_ROUTING_HV_SINT 4 +#define KVM_IRQ_ROUTING_XEN_EVTCHN 5 struct kvm_irq_routing_entry { __u32 gsi; @@ -1178,6 +1190,7 @@ struct kvm_irq_routing_entry { struct kvm_irq_routing_msi msi; struct kvm_irq_routing_s390_adapter adapter; struct kvm_irq_routing_hv_sint hv_sint; + struct kvm_irq_routing_xen_evtchn xen_evtchn; __u32 pad[8]; } u; }; @@ -1208,6 +1221,7 @@ struct kvm_x86_mce { #define KVM_XEN_HVM_CONFIG_INTERCEPT_HCALL (1 << 1) #define KVM_XEN_HVM_CONFIG_SHARED_INFO (1 << 2) #define KVM_XEN_HVM_CONFIG_RUNSTATE (1 << 3) +#define KVM_XEN_HVM_CONFIG_EVTCHN_2LEVEL (1 << 4) struct kvm_xen_hvm_config { __u32 flags; @@ -1610,6 +1624,9 @@ struct kvm_enc_region { #define KVM_S390_NORMAL_RESET _IO(KVMIO, 0xc3) #define KVM_S390_CLEAR_RESET _IO(KVMIO, 0xc4) +/* Available with KVM_CAP_XSAVE2 */ +#define KVM_GET_XSAVE2 _IOR(KVMIO, 0xcf, struct kvm_xsave) + struct kvm_s390_pv_sec_parm { __u64 origin; __u64 length; diff --git a/tools/include/uapi/linux/perf_event.h b/tools/include/uapi/linux/perf_event.h index bd8860eeb291..4cd39aaccbe7 100644 --- a/tools/include/uapi/linux/perf_event.h +++ b/tools/include/uapi/linux/perf_event.h @@ -1332,7 +1332,10 @@ union perf_mem_data_src { /* hop level */ #define PERF_MEM_HOPS_0 0x01 /* remote core, same node */ -/* 2-7 available */ +#define PERF_MEM_HOPS_1 0x02 /* remote node, same socket */ +#define PERF_MEM_HOPS_2 0x03 /* remote socket, same board */ +#define PERF_MEM_HOPS_3 0x04 /* remote board */ +/* 5-7 available */ #define PERF_MEM_HOPS_SHIFT 43 #define PERF_MEM_S(a, s) \ |
