diff options
Diffstat (limited to 'tools/testing/selftests/drivers/net')
8 files changed, 317 insertions, 9 deletions
diff --git a/tools/testing/selftests/drivers/net/bonding/Makefile b/tools/testing/selftests/drivers/net/bonding/Makefile index 2b10854e4b1e..44b98f17f8ff 100644 --- a/tools/testing/selftests/drivers/net/bonding/Makefile +++ b/tools/testing/selftests/drivers/net/bonding/Makefile @@ -10,7 +10,8 @@ TEST_PROGS := \ mode-2-recovery-updelay.sh \ bond_options.sh \ bond-eth-type-change.sh \ - bond_macvlan_ipvlan.sh + bond_macvlan_ipvlan.sh \ + bond_passive_lacp.sh TEST_FILES := \ lag_lib.sh \ diff --git a/tools/testing/selftests/drivers/net/bonding/bond_options.sh b/tools/testing/selftests/drivers/net/bonding/bond_options.sh index 7bc148889ca7..187b478d0ddf 100755 --- a/tools/testing/selftests/drivers/net/bonding/bond_options.sh +++ b/tools/testing/selftests/drivers/net/bonding/bond_options.sh @@ -7,6 +7,8 @@ ALL_TESTS=" prio arp_validate num_grat_arp + fail_over_mac + vlan_over_bond " lib_dir=$(dirname "$0") @@ -352,8 +354,8 @@ garp_test() exp_num=$(echo "${param}" | cut -f6 -d ' ') active_slave=$(cmd_jq "ip -n ${s_ns} -d -j link show bond0" ".[].linkinfo.info_data.active_slave") - slowwait_for_counter $((exp_num + 5)) $exp_num \ - tc_rule_handle_stats_get "dev s${active_slave#eth} ingress" 101 ".packets" "-n ${g_ns}" + slowwait_for_counter $((exp_num + 5)) $exp_num tc_rule_handle_stats_get \ + "dev s${active_slave#eth} ingress" 101 ".packets" "-n ${g_ns}" &> /dev/null # check result real_num=$(tc_rule_handle_stats_get "dev s${active_slave#eth} ingress" 101 ".packets" "-n ${g_ns}") @@ -376,6 +378,197 @@ num_grat_arp() done } +check_all_mac_same() +{ + RET=0 + # all slaves should have same mac address (with the first port's mac) + local bond_mac=$(ip -n "$s_ns" -j link show bond0 | jq -r '.[]["address"]') + local eth0_mac=$(ip -n "$s_ns" -j link show eth0 | jq -r '.[]["address"]') + local eth1_mac=$(ip -n "$s_ns" -j link show eth1 | jq -r '.[]["address"]') + local eth2_mac=$(ip -n "$s_ns" -j link show eth2 | jq -r '.[]["address"]') + if [ "$bond_mac" != "${mac[0]}" ] || [ "$eth0_mac" != "$bond_mac" ] || \ + [ "$eth1_mac" != "$bond_mac" ] || [ "$eth2_mac" != "$bond_mac" ]; then + RET=1 + fi +} + +check_bond_mac_same_with_first() +{ + RET=0 + # bond mac address should be same with the first added slave + local bond_mac=$(ip -n "$s_ns" -j link show bond0 | jq -r '.[]["address"]') + if [ "$bond_mac" != "${mac[0]}" ]; then + RET=1 + fi +} + +check_bond_mac_same_with_active() +{ + RET=0 + # bond mac address should be same with active slave + local bond_mac=$(ip -n "$s_ns" -j link show bond0 | jq -r '.[]["address"]') + local active_slave=$(cmd_jq "ip -n ${s_ns} -d -j link show bond0" ".[].linkinfo.info_data.active_slave") + local active_slave_mac=$(ip -n "$s_ns" -j link show "$active_slave" | jq -r '.[]["address"]') + if [ "$bond_mac" != "$active_slave_mac" ]; then + RET=1 + fi +} + +check_backup_slave_mac_not_change() +{ + RET=0 + # backup slave's mac address is not changed + if ip -n "$s_ns" -d -j link show type bond_slave | jq -e '.[] + | select(.linkinfo.info_slave_data.state=="BACKUP") + | select(.address != .linkinfo.info_slave_data.perm_hwaddr)' &> /dev/null; then + RET=1 + fi +} + +check_backup_slave_mac_inherit() +{ + local backup_mac + RET=0 + + # backup slaves should use mac[1] or mac[2] + local backup_macs=$(ip -n "$s_ns" -d -j link show type bond_slave | \ + jq -r '.[] | select(.linkinfo.info_slave_data.state=="BACKUP") | .address') + for backup_mac in $backup_macs; do + if [ "$backup_mac" != "${mac[1]}" ] && [ "$backup_mac" != "${mac[2]}" ]; then + RET=1 + fi + done +} + +check_first_slave_random_mac() +{ + RET=0 + # remove the first added slave and added it back + ip -n "$s_ns" link set eth0 nomaster + ip -n "$s_ns" link set eth0 master bond0 + + # the first slave should use random mac address + eth0_mac=$(ip -n "$s_ns" -j link show eth0 | jq -r '.[]["address"]') + [ "$eth0_mac" = "${mac[0]}" ] && RET=1 + log_test "bond fail_over_mac follow" "random first slave mac" + + # remove the first slave, the permanent MAC address should be restored back + ip -n "$s_ns" link set eth0 nomaster + eth0_mac=$(ip -n "$s_ns" -j link show eth0 | jq -r '.[]["address"]') + [ "$eth0_mac" != "${mac[0]}" ] && RET=1 +} + +do_active_backup_failover() +{ + local active_slave=$(cmd_jq "ip -n ${s_ns} -d -j link show bond0" ".[].linkinfo.info_data.active_slave") + ip -n ${s_ns} link set ${active_slave} down + slowwait 2 active_slave_changed $active_slave + ip -n ${s_ns} link set ${active_slave} up +} + +fail_over_mac() +{ + # Bring down the first interface on the switch to force the bond to + # select another active interface instead of the first one that joined. + ip -n "$g_ns" link set s0 down + + # fail_over_mac none + bond_reset "mode active-backup miimon 100 fail_over_mac 0" + check_all_mac_same + log_test "fail_over_mac 0" "all slaves have same mac" + do_active_backup_failover + check_all_mac_same + log_test "fail_over_mac 0" "failover: all slaves have same mac" + + # fail_over_mac active + bond_reset "mode active-backup miimon 100 fail_over_mac 1" + check_bond_mac_same_with_active + log_test "fail_over_mac 1" "bond mac is same with active slave mac" + check_backup_slave_mac_not_change + log_test "fail_over_mac 1" "backup slave mac is not changed" + do_active_backup_failover + check_bond_mac_same_with_active + log_test "fail_over_mac 1" "failover: bond mac is same with active slave mac" + check_backup_slave_mac_not_change + log_test "fail_over_mac 1" "failover: backup slave mac is not changed" + + # fail_over_mac follow + bond_reset "mode active-backup miimon 100 fail_over_mac 2" + check_bond_mac_same_with_first + log_test "fail_over_mac 2" "bond mac is same with first slave mac" + check_bond_mac_same_with_active + log_test "fail_over_mac 2" "bond mac is same with active slave mac" + check_backup_slave_mac_inherit + log_test "fail_over_mac 2" "backup slave mac inherit" + do_active_backup_failover + check_bond_mac_same_with_first + log_test "fail_over_mac 2" "failover: bond mac is same with first slave mac" + check_bond_mac_same_with_active + log_test "fail_over_mac 2" "failover: bond mac is same with active slave mac" + check_backup_slave_mac_inherit + log_test "fail_over_mac 2" "failover: backup slave mac inherit" + check_first_slave_random_mac + log_test "fail_over_mac 2" "first slave mac random" +} + +vlan_over_bond_arp() +{ + local mode="$1" + RET=0 + + bond_reset "mode $mode arp_interval 100 arp_ip_target 192.0.3.10" + ip -n "${s_ns}" link add bond0.3 link bond0 type vlan id 3 + ip -n "${s_ns}" link set bond0.3 up + ip -n "${s_ns}" addr add 192.0.3.1/24 dev bond0.3 + ip -n "${s_ns}" addr add 2001:db8::3:1/64 dev bond0.3 + + slowwait_for_counter 5 5 tc_rule_handle_stats_get \ + "dev eth0.3 ingress" 101 ".packets" "-n ${c_ns}" &> /dev/null || RET=1 + log_test "vlan over bond arp" "$mode" +} + +vlan_over_bond_ns() +{ + local mode="$1" + RET=0 + + if skip_ns; then + log_test_skip "vlan_over_bond ns" "$mode" + return 0 + fi + + bond_reset "mode $mode arp_interval 100 ns_ip6_target 2001:db8::3:10" + ip -n "${s_ns}" link add bond0.3 link bond0 type vlan id 3 + ip -n "${s_ns}" link set bond0.3 up + ip -n "${s_ns}" addr add 192.0.3.1/24 dev bond0.3 + ip -n "${s_ns}" addr add 2001:db8::3:1/64 dev bond0.3 + + slowwait_for_counter 5 5 tc_rule_handle_stats_get \ + "dev eth0.3 ingress" 102 ".packets" "-n ${c_ns}" &> /dev/null || RET=1 + log_test "vlan over bond ns" "$mode" +} + +vlan_over_bond() +{ + # add vlan 3 for client + ip -n "${c_ns}" link add eth0.3 link eth0 type vlan id 3 + ip -n "${c_ns}" link set eth0.3 up + ip -n "${c_ns}" addr add 192.0.3.10/24 dev eth0.3 + ip -n "${c_ns}" addr add 2001:db8::3:10/64 dev eth0.3 + + # Add tc rule to check the vlan pkts + tc -n "${c_ns}" qdisc add dev eth0.3 clsact + tc -n "${c_ns}" filter add dev eth0.3 ingress protocol arp \ + handle 101 flower skip_hw arp_op request \ + arp_sip 192.0.3.1 arp_tip 192.0.3.10 action pass + tc -n "${c_ns}" filter add dev eth0.3 ingress protocol ipv6 \ + handle 102 flower skip_hw ip_proto icmpv6 \ + type 135 src_ip 2001:db8::3:1 action pass + + vlan_over_bond_arp "active-backup" + vlan_over_bond_ns "active-backup" +} + trap cleanup EXIT setup_prepare diff --git a/tools/testing/selftests/drivers/net/bonding/bond_passive_lacp.sh b/tools/testing/selftests/drivers/net/bonding/bond_passive_lacp.sh new file mode 100755 index 000000000000..9c3b089813df --- /dev/null +++ b/tools/testing/selftests/drivers/net/bonding/bond_passive_lacp.sh @@ -0,0 +1,105 @@ +#!/bin/bash +# SPDX-License-Identifier: GPL-2.0 +# +# Test if a bond interface works with lacp_active=off. + +# shellcheck disable=SC2034 +REQUIRE_MZ=no +NUM_NETIFS=0 +lib_dir=$(dirname "$0") +# shellcheck disable=SC1091 +source "$lib_dir"/../../../net/forwarding/lib.sh + +# shellcheck disable=SC2317 +check_port_state() +{ + local netns=$1 + local port=$2 + local state=$3 + + ip -n "${netns}" -d -j link show "$port" | \ + jq -e ".[].linkinfo.info_slave_data.ad_actor_oper_port_state_str | index(\"${state}\") != null" > /dev/null +} + +check_pkt_count() +{ + RET=0 + local ns="$1" + local iface="$2" + + # wait 65s, one per 30s + slowwait_for_counter 65 2 tc_rule_handle_stats_get \ + "dev ${iface} egress" 101 ".packets" "-n ${ns}" &> /dev/null +} + +setup() { + setup_ns c_ns s_ns + + # shellcheck disable=SC2154 + ip -n "${c_ns}" link add eth0 type veth peer name eth0 netns "${s_ns}" + ip -n "${c_ns}" link add eth1 type veth peer name eth1 netns "${s_ns}" + + # Add tc filter to count the pkts + tc -n "${c_ns}" qdisc add dev eth0 clsact + tc -n "${c_ns}" filter add dev eth0 egress handle 101 protocol 0x8809 matchall action pass + tc -n "${s_ns}" qdisc add dev eth1 clsact + tc -n "${s_ns}" filter add dev eth1 egress handle 101 protocol 0x8809 matchall action pass + + ip -n "${s_ns}" link add bond0 type bond mode 802.3ad lacp_active on lacp_rate fast + ip -n "${s_ns}" link set eth0 master bond0 + ip -n "${s_ns}" link set eth1 master bond0 + + ip -n "${c_ns}" link add bond0 type bond mode 802.3ad lacp_active off lacp_rate fast + ip -n "${c_ns}" link set eth0 master bond0 + ip -n "${c_ns}" link set eth1 master bond0 + +} + +trap cleanup_all_ns EXIT +setup + +# The bond will send 2 lacpdu pkts during init time, let's wait at least 2s +# after interface up +ip -n "${c_ns}" link set bond0 up +sleep 2 + +# 1. The passive side shouldn't send LACPDU. +check_pkt_count "${c_ns}" "eth0" && RET=1 +log_test "802.3ad lacp_active off" "init port" + +ip -n "${s_ns}" link set bond0 up +# 2. The passive side should not have the 'active' flag. +RET=0 +slowwait 2 check_port_state "${c_ns}" "eth0" "active" && RET=1 +log_test "802.3ad lacp_active off" "port state active" + +# 3. The active side should have the 'active' flag. +RET=0 +slowwait 2 check_port_state "${s_ns}" "eth0" "active" || RET=1 +log_test "802.3ad lacp_active on" "port state active" + +# 4. Make sure the connection is not expired. +RET=0 +slowwait 5 check_port_state "${s_ns}" "eth0" "distributing" +slowwait 10 check_port_state "${s_ns}" "eth0" "expired" && RET=1 +log_test "bond 802.3ad lacp_active off" "port connection" + +# After testing, disconnect one port on each side to check the state. +ip -n "${s_ns}" link set eth0 nomaster +ip -n "${s_ns}" link set eth0 up +ip -n "${c_ns}" link set eth1 nomaster +ip -n "${c_ns}" link set eth1 up +# Due to Periodic Machine and Rx Machine state change, the bond will still +# send lacpdu pkts in a few seconds. sleep at lease 5s to make sure +# negotiation finished +sleep 5 + +# 5. The active side should keep sending LACPDU. +check_pkt_count "${s_ns}" "eth1" || RET=1 +log_test "bond 802.3ad lacp_active on" "port pkt after disconnect" + +# 6. The passive side shouldn't send LACPDU anymore. +check_pkt_count "${c_ns}" "eth0" && RET=1 +log_test "bond 802.3ad lacp_active off" "port pkt after disconnect" + +exit "$EXIT_STATUS" diff --git a/tools/testing/selftests/drivers/net/bonding/bond_topo_2d1c.sh b/tools/testing/selftests/drivers/net/bonding/bond_topo_2d1c.sh index 195ef83cfbf1..167aa4a4a12a 100644 --- a/tools/testing/selftests/drivers/net/bonding/bond_topo_2d1c.sh +++ b/tools/testing/selftests/drivers/net/bonding/bond_topo_2d1c.sh @@ -39,6 +39,8 @@ g_ip4="192.0.2.254" s_ip6="2001:db8::1" c_ip6="2001:db8::10" g_ip6="2001:db8::254" +mac[0]="00:0a:0b:0c:0d:01" +mac[1]="00:0a:0b:0c:0d:02" gateway_create() { @@ -62,6 +64,7 @@ server_create() for i in $(seq 0 1); do ip -n ${s_ns} link add eth${i} type veth peer name s${i} netns ${g_ns} + ip -n "${s_ns}" link set "eth${i}" addr "${mac[$i]}" ip -n ${g_ns} link set s${i} up ip -n ${g_ns} link set s${i} master br0 diff --git a/tools/testing/selftests/drivers/net/bonding/bond_topo_3d1c.sh b/tools/testing/selftests/drivers/net/bonding/bond_topo_3d1c.sh index 3a1333d9a85b..23a2932301cc 100644 --- a/tools/testing/selftests/drivers/net/bonding/bond_topo_3d1c.sh +++ b/tools/testing/selftests/drivers/net/bonding/bond_topo_3d1c.sh @@ -26,6 +26,7 @@ # +-------------------------------------+ source bond_topo_2d1c.sh +mac[2]="00:0a:0b:0c:0d:03" setup_prepare() { @@ -36,6 +37,7 @@ setup_prepare() # Add the extra device as we use 3 down links for bond0 local i=2 ip -n ${s_ns} link add eth${i} type veth peer name s${i} netns ${g_ns} + ip -n "${s_ns}" link set "eth${i}" addr "${mac[$i]}" ip -n ${g_ns} link set s${i} up ip -n ${g_ns} link set s${i} master br0 ip -n ${s_ns} link set eth${i} master bond0 diff --git a/tools/testing/selftests/drivers/net/bonding/config b/tools/testing/selftests/drivers/net/bonding/config index dad4e5fda4db..832fa1caeb66 100644 --- a/tools/testing/selftests/drivers/net/bonding/config +++ b/tools/testing/selftests/drivers/net/bonding/config @@ -6,6 +6,8 @@ CONFIG_MACVLAN=y CONFIG_IPVLAN=y CONFIG_NET_ACT_GACT=y CONFIG_NET_CLS_FLOWER=y +CONFIG_NET_CLS_MATCHALL=m CONFIG_NET_SCH_INGRESS=y CONFIG_NLMON=y CONFIG_VETH=y +CONFIG_VLAN_8021Q=m diff --git a/tools/testing/selftests/drivers/net/hw/csum.py b/tools/testing/selftests/drivers/net/hw/csum.py index cd23af875317..3e3a89a34afe 100755 --- a/tools/testing/selftests/drivers/net/hw/csum.py +++ b/tools/testing/selftests/drivers/net/hw/csum.py @@ -17,7 +17,7 @@ def test_receive(cfg, ipver="6", extra_args=None): ip_args = f"-{ipver} -S {cfg.remote_addr_v[ipver]} -D {cfg.addr_v[ipver]}" rx_cmd = f"{cfg.bin_local} -i {cfg.ifname} -n 100 {ip_args} -r 1 -R {extra_args}" - tx_cmd = f"{cfg.bin_remote} -i {cfg.ifname} -n 100 {ip_args} -r 1 -T {extra_args}" + tx_cmd = f"{cfg.bin_remote} -i {cfg.remote_ifname} -n 100 {ip_args} -r 1 -T {extra_args}" with bkg(rx_cmd, exit_wait=True): wait_port_listen(34000, proto="udp") @@ -37,7 +37,7 @@ def test_transmit(cfg, ipver="6", extra_args=None): if extra_args != "-U -Z": extra_args += " -r 1" - rx_cmd = f"{cfg.bin_remote} -i {cfg.ifname} -L 1 -n 100 {ip_args} -R {extra_args}" + rx_cmd = f"{cfg.bin_remote} -i {cfg.remote_ifname} -L 1 -n 100 {ip_args} -R {extra_args}" tx_cmd = f"{cfg.bin_local} -i {cfg.ifname} -L 1 -n 100 {ip_args} -T {extra_args}" with bkg(rx_cmd, host=cfg.remote, exit_wait=True): diff --git a/tools/testing/selftests/drivers/net/napi_threaded.py b/tools/testing/selftests/drivers/net/napi_threaded.py index b2698db39817..9699a100a87d 100755 --- a/tools/testing/selftests/drivers/net/napi_threaded.py +++ b/tools/testing/selftests/drivers/net/napi_threaded.py @@ -35,6 +35,8 @@ def _setup_deferred_cleanup(cfg) -> None: threaded = cmd(f"cat /sys/class/net/{cfg.ifname}/threaded").stdout defer(_set_threaded_state, cfg, threaded) + return combined + def enable_dev_threaded_disable_napi_threaded(cfg, nl) -> None: """ @@ -49,7 +51,7 @@ def enable_dev_threaded_disable_napi_threaded(cfg, nl) -> None: napi0_id = napis[0]['id'] napi1_id = napis[1]['id'] - _setup_deferred_cleanup(cfg) + qcnt = _setup_deferred_cleanup(cfg) # set threaded _set_threaded_state(cfg, 1) @@ -62,7 +64,7 @@ def enable_dev_threaded_disable_napi_threaded(cfg, nl) -> None: nl.napi_set({'id': napi1_id, 'threaded': 'disabled'}) cmd(f"ethtool -L {cfg.ifname} combined 1") - cmd(f"ethtool -L {cfg.ifname} combined 2") + cmd(f"ethtool -L {cfg.ifname} combined {qcnt}") _assert_napi_threaded_enabled(nl, napi0_id) _assert_napi_threaded_disabled(nl, napi1_id) @@ -80,7 +82,7 @@ def change_num_queues(cfg, nl) -> None: napi0_id = napis[0]['id'] napi1_id = napis[1]['id'] - _setup_deferred_cleanup(cfg) + qcnt = _setup_deferred_cleanup(cfg) # set threaded _set_threaded_state(cfg, 1) @@ -90,7 +92,7 @@ def change_num_queues(cfg, nl) -> None: _assert_napi_threaded_enabled(nl, napi1_id) cmd(f"ethtool -L {cfg.ifname} combined 1") - cmd(f"ethtool -L {cfg.ifname} combined 2") + cmd(f"ethtool -L {cfg.ifname} combined {qcnt}") # check napi threaded is set for both napis _assert_napi_threaded_enabled(nl, napi0_id) |