| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm
Pull TSM updates from Dan Williams:
"A couple of updates to the maximum buffer sizes supported for the
configfs-tsm-reports interface.
This interface is a common transport that conveys the varied
architecture specific launch attestation reports for confidential VMs.
- Prepare the configfs-tsm-reports interface for passing larger
attestation evidence blobs for "Device Identifier Composition
Engine" (DICE) and Post Quantum Crypto (PQC)
- Update the tdx-guest driver for DICE evidence (larger certificate
chains and the CBOR Web Token schema)"
* tag 'tsm-for-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/devsec/tsm:
configfs-tsm-report: tdx_guest: Increase Quote buffer size to 128KB
configfs-tsm-report: Increase TSM_REPORT_OUTBLOB_MAX to 16MB
configfs-tsm-report: Document size limits for outblob attributes
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs
Pull f2fs updates from Jaegeuk Kim:
"In this development cycle, we focused on several key performance
optimizations:
- introducing large folio support to enhance read speeds for
immutable files
- reducing checkpoint=enable latency by flushing only committed dirty
pages
- implementing tracepoints to diagnose and resolve lock priority
inversion.
Additionally, we introduced the packed_ssa feature to optimize the SSA
footprint when utilizing large block sizes.
Detail summary:
Enhancements:
- support large folio for immutable non-compressed case
- support non-4KB block size without packed_ssa feature
- optimize f2fs_enable_checkpoint() to avoid long delay
- optimize f2fs_overwrite_io() for f2fs_iomap_begin
- optimize NAT block loading during checkpoint write
- add write latency stats for NAT and SIT blocks in
f2fs_write_checkpoint
- pin files do not require sbi->writepages lock for ordering
- avoid f2fs_map_blocks() for consecutive holes in readpages
- flush plug periodically during GC to maximize readahead effect
- add tracepoints to catch lock overheads
- add several sysfs entries to tune internal lock priorities
Fixes:
- fix lock priority inversion issue
- fix incomplete block usage in compact SSA summaries
- fix to show simulate_lock_timeout correctly
- fix to avoid mapping wrong physical block for swapfile
- fix IS_CHECKPOINTED flag inconsistency issue caused by
concurrent atomic commit and checkpoint writes
- fix to avoid UAF in f2fs_write_end_io()"
* tag 'f2fs-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs: (61 commits)
f2fs: sysfs: introduce critical_task_priority
f2fs: introduce trace_f2fs_priority_update
f2fs: fix lock priority inversion issue
f2fs: optimize f2fs_overwrite_io() for f2fs_iomap_begin
f2fs: fix incomplete block usage in compact SSA summaries
f2fs: decrease maximum flush retry count in f2fs_enable_checkpoint()
f2fs: optimize NAT block loading during checkpoint write
f2fs: change size parameter of __has_cursum_space() to unsigned int
f2fs: add write latency stats for NAT and SIT blocks in f2fs_write_checkpoint
f2fs: pin files do not require sbi->writepages lock for ordering
f2fs: fix to show simulate_lock_timeout correctly
f2fs: introduce FAULT_SKIP_WRITE
f2fs: check skipped write in f2fs_enable_checkpoint()
Revert "f2fs: add timeout in f2fs_enable_checkpoint()"
f2fs: fix to unlock folio in f2fs_read_data_large_folio()
f2fs: fix error path handling in f2fs_read_data_large_folio()
f2fs: use folio_end_read
f2fs: fix to avoid mapping wrong physical block for swapfile
f2fs: avoid f2fs_map_blocks() for consecutive holes in readpages
f2fs: advance index and offset after zeroing in large folio read
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
- "powerpc/64s: do not re-activate batched TLB flush" makes
arch_{enter|leave}_lazy_mmu_mode() nest properly (Alexander Gordeev)
It adds a generic enter/leave layer and switches architectures to use
it. Various hacks were removed in the process.
- "zram: introduce compressed data writeback" implements data
compression for zram writeback (Richard Chang and Sergey Senozhatsky)
- "mm: folio_zero_user: clear page ranges" adds clearing of contiguous
page ranges for hugepages. Large improvements during demand faulting
are demonstrated (David Hildenbrand)
- "memcg cleanups" tidies up some memcg code (Chen Ridong)
- "mm/damon: introduce {,max_}nr_snapshots and tracepoint for damos
stats" improves DAMOS stat's provided information, deterministic
control, and readability (SeongJae Park)
- "selftests/mm: hugetlb cgroup charging: robustness fixes" fixes a few
issues in the hugetlb cgroup charging selftests (Li Wang)
- "Fix va_high_addr_switch.sh test failure - again" addresses several
issues in the va_high_addr_switch test (Chunyu Hu)
- "mm/damon/tests/core-kunit: extend existing test scenarios" improves
the KUnit test coverage for DAMON (Shu Anzai)
- "mm/khugepaged: fix dirty page handling for MADV_COLLAPSE" fixes a
glitch in khugepaged which was causing madvise(MADV_COLLAPSE) to
transiently return -EAGAIN (Shivank Garg)
- "arch, mm: consolidate hugetlb early reservation" reworks and
consolidates a pile of straggly code related to reservation of
hugetlb memory from bootmem and creation of CMA areas for hugetlb
(Mike Rapoport)
- "mm: clean up anon_vma implementation" cleans up the anon_vma
implementation in various ways (Lorenzo Stoakes)
- "tweaks for __alloc_pages_slowpath()" does a little streamlining of
the page allocator's slowpath code (Vlastimil Babka)
- "memcg: separate private and public ID namespaces" cleans up the
memcg ID code and prevents the internal-only private IDs from being
exposed to userspace (Shakeel Butt)
- "mm: hugetlb: allocate frozen gigantic folio" cleans up the
allocation of frozen folios and avoids some atomic refcount
operations (Kefeng Wang)
- "mm/damon: advance DAMOS-based LRU sorting" improves DAMOS's movement
of memory betewwn the active and inactive LRUs and adds auto-tuning
of the ratio-based quotas and of monitoring intervals (SeongJae Park)
- "Support page table check on PowerPC" makes
CONFIG_PAGE_TABLE_CHECK_ENFORCED work on powerpc (Andrew Donnellan)
- "nodemask: align nodes_and{,not} with underlying bitmap ops" makes
nodes_and() and nodes_andnot() propagate the return values from the
underlying bit operations, enabling some cleanup in calling code
(Yury Norov)
- "mm/damon: hide kdamond and kdamond_lock from API callers" cleans up
some DAMON internal interfaces (SeongJae Park)
- "mm/khugepaged: cleanups and scan limit fix" does some cleanup work
in khupaged and fixes a scan limit accounting issue (Shivank Garg)
- "mm: balloon infrastructure cleanups" goes to town on the balloon
infrastructure and its page migration function. Mainly cleanups, also
some locking simplification (David Hildenbrand)
- "mm/vmscan: add tracepoint and reason for kswapd_failures reset" adds
additional tracepoints to the page reclaim code (Jiayuan Chen)
- "Replace wq users and add WQ_PERCPU to alloc_workqueue() users" is
part of Marco's kernel-wide migration from the legacy workqueue APIs
over to the preferred unbound workqueues (Marco Crivellari)
- "Various mm kselftests improvements/fixes" provides various unrelated
improvements/fixes for the mm kselftests (Kevin Brodsky)
- "mm: accelerate gigantic folio allocation" greatly speeds up gigantic
folio allocation, mainly by avoiding unnecessary work in
pfn_range_valid_contig() (Kefeng Wang)
- "selftests/damon: improve leak detection and wss estimation
reliability" improves the reliability of two of the DAMON selftests
(SeongJae Park)
- "mm/damon: cleanup kdamond, damon_call(), damos filter and
DAMON_MIN_REGION" does some cleanup work in the core DAMON code
(SeongJae Park)
- "Docs/mm/damon: update intro, modules, maintainer profile, and misc"
performs maintenance work on the DAMON documentation (SeongJae Park)
- "mm: add and use vma_assert_stabilised() helper" refactors and cleans
up the core VMA code. The main aim here is to be able to use the mmap
write lock's lockdep state to perform various assertions regarding
the locking which the VMA code requires (Lorenzo Stoakes)
- "mm, swap: swap table phase II: unify swapin use" removes some old
swap code (swap cache bypassing and swap synchronization) which
wasn't working very well. Various other cleanups and simplifications
were made. The end result is a 20% speedup in one benchmark (Kairui
Song)
- "enable PT_RECLAIM on more 64-bit architectures" makes PT_RECLAIM
available on 64-bit alpha, loongarch, mips, parisc, and um. Various
cleanups were performed along the way (Qi Zheng)
* tag 'mm-stable-2026-02-11-19-22' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (325 commits)
mm/memory: handle non-split locks correctly in zap_empty_pte_table()
mm: move pte table reclaim code to memory.c
mm: make PT_RECLAIM depends on MMU_GATHER_RCU_TABLE_FREE
mm: convert __HAVE_ARCH_TLB_REMOVE_TABLE to CONFIG_HAVE_ARCH_TLB_REMOVE_TABLE config
um: mm: enable MMU_GATHER_RCU_TABLE_FREE
parisc: mm: enable MMU_GATHER_RCU_TABLE_FREE
mips: mm: enable MMU_GATHER_RCU_TABLE_FREE
LoongArch: mm: enable MMU_GATHER_RCU_TABLE_FREE
alpha: mm: enable MMU_GATHER_RCU_TABLE_FREE
mm: change mm/pt_reclaim.c to use asm/tlb.h instead of asm-generic/tlb.h
mm/damon/stat: remove __read_mostly from memory_idle_ms_percentiles
zsmalloc: make common caches global
mm: add SPDX id lines to some mm source files
mm/zswap: use %pe to print error pointers
mm/vmscan: use %pe to print error pointers
mm/readahead: fix typo in comment
mm: khugepaged: fix NR_FILE_PAGES and NR_SHMEM in collapse_file()
mm: refactor vma_map_pages to use vm_insert_pages
mm/damon: unify address range representation with damon_addr_range
mm/cma: replace snprintf with strscpy in cma_new_area
...
|
|
Pull drm updates from Dave Airlie:
"Highlights:
- amdgpu support for lots of new IP blocks which means newer GPUs
- xe has a lot of SR-IOV and SVM improvements
- lots of intel display refactoring across i915/xe
- msm has more support for gen8 platforms
- Given up on kgdb/kms integration, it's too hard on modern hw
core:
- drop kgdb support
- replace system workqueue with percpu
- account for property blobs in memcg
- MAINTAINERS updates for xe + buddy
rust:
- Fix documentation for Registration constructors
- Use pin_init::zeroed() for fops initialization
- Annotate DRM helpers with __rust_helper
- Improve safety documentation for gem::Object::new()
- Update AlwaysRefCounted imports
- mm: Prevent integer overflow in page_align()
atomic:
- add drm_device pointer to drm_private_obj
- introduce gamma/degamma LUT size check
buddy:
- fix free_trees memory leak
- prevent BUG_ON
bridge:
- introduce drm_bridge_unplug/enter/exit
- add connector argument to .hpd_notify
- lots of recounting conversions
- convert rockchip inno hdmi to bridge
- lontium-lt9611uxc: switch to HDMI audio helpers
- dw-hdmi-qp: add support for HPD-less setups
- Algoltek AG6311 support
panels:
- edp: CSW MNE007QB3-1, AUO B140HAN06.4, AUO B140QAX01.H
- st75751: add SPI support
- Sitronix ST7920, Samsung LTL106HL02
- LG LH546WF1-ED01, HannStar HSD156J
- BOE NV130WUM-T08
- Innolux G150XGE-L05
- Anbernic RG-DS
dma-buf:
- improve sg_table debugging
- add tracepoints
- call clear_page instead of memset
- start to introduce cgroup memory accounting in heaps
- remove sysfs stats
dma-fence:
- add new helpers
dp:
- mst: avoid oob access with vcpi=0
hdmi:
- limit infoframes exposure to userspace
gem:
- reduce page table overhead with THP
- fix leak in drm_gem_get_unmapped_area
gpuvm:
- API sanitation for rust bindings
sched:
- introduce new helpers
panic:
- report invalid panic modes
- add kunit tests
i915/xe display:
- Expose sharpness only if num_scalers is >= 2
- Add initial Xe3P_LPD for NVL
- BMG FBC support
- Add MTL+ platforms to support dpll framework
_ fix DIMM_S DRM decoding on ICL
- Return to using AUX interrupts
- PSR/Panel replay refactoring
- use consolidation HDMI tables
- Xe3_LPD CD2X dividier changes
xe:
- vfio: add vfio_pci for intel GPU
- multi queue support
- dynamic pagemaps and multi-device SVM
- expose temp attribs in hwmon
- NO_COMPRESSION bo flag
- expose MERT OA unit
- sysfs survivability refactor
- SRIOV PF: add MERT support
- enable SR-IOV VF migration
- Enable I2C/NVM on Crescent Island
- Xe3p page reclaimation support
- introduce SRIOV scheduler groups
- add SoC remappt support in system controller
- insert compiler barriers in GuC code
- define NVL GuC firmware
- handle GT resume failure
- fix drm scheduler layering violations
- enable GSC loading and PXP for PTL
- disable GuC Power DCC strategy on PTL
- unregister drm device on probe error
i915:
- move to kernel standard fault injection
- bump recommended GuC version for DG2 and MTL
amdgpu:
- SMUIO 15.x, PSP 15.x support
- IH 6.1.1/7.1 support
- MMHUB 3.4/4.2 support
- GC 11.5.4/12.1 support
- SDMA 6.1.4/7.1/7.11.4 support
- JPEG 5.3 support
- UserQ updates
- GC 9 gfx queue reset support
- TTM memory ops parallelization
- convert legacy logging to new helpers
- DC analog fixes
amdkfd:
- GC 11.5.4/12.1 suppport
- SDMA 6.1.4/7.1 support
- per context support
- increase kfd process hash table
- Reserved SDMA rework
radeon:
- convert legacy logging to new helpers
- use devm for i2c adapters
msm:
- GPU
- Document a612/RGMU dt bindings
- UBWC 6.0 support (for A840 / Kaanapali)
- a225 support
- DPU:
- Switch to use virtual planes by default
- Fix DSI CMD panels on DPU 3.x
- Rewrite format handling to remove intermediate representation
- Fix watchdog on DPU 8.x+
- Fix TE / Vsync source setting on DPU 8.x+
- Add 3D_Mux on SC7280
- Kaanapali platform support
- Fix UBWC register programming
- Make RM reserve DSPP-enabled mixers for CRTCs with LMs
- Gamma correction support
- DP:
- Enable support for eDP 1.4+ link rate tables
- Fix MDSS1 DP indices on SA8775P, making them to work
- Fix msm_dp_ctrl_config_msa() to work with LLVM 20
- DSI:
- Document QCS8300 as compatible with SA8775P
- Kaanapali platform support
- DSI PHY:
- switch to divider_determine_rate()
- MDP5:
- Drop support for MSM8998, SDM660 and SDM630 (switch over to DPU)
- MDSS:
- Kaanapali platform support
- Fixed UBWC register programming
nova-core:
- Prepare for Turing support. This includes parsing and handling
Turing-specific firmware headers and sections as well as a Turing
Falcon HAL implementation
- Get rid of the Result<impl PinInit<T, E>> anti-pattern
- Relocate initializer-specific code into the appropriate initializer
- Use CStr::from_bytes_until_nul() to remove custom helpers
- Improve handling of unexpected firmware values
- Clean up redundant debug prints
- Replace c_str!() with native Rust C-string literals
- Update nova-core task list
nova:
- Align GEM object size to system page size
tyr:
- Use generated uAPI bindings for GpuInfo
- Replace manual sleeps with read_poll_timeout()
- Replace c_str!() with native Rust C-string literals
- Suppress warnings for unread fields
- Fix incorrect register name in print statement
nouveau:
- fix big page table support races in PTE management
- improve reclocking on tegra 186+
amdxdna:
- fix suspend race conditions
- improve handling of zero tail pointers
- fix cu_idx overwritten during command setup
- enable hardware context priority
- remove NPU2 support
- update message buffer allocation requirements
- update firmware version check
ast:
- support imported cursor buffers
- big endian fixes
etnaviv:
- add PPU flop reset support
imagination:
- add AM62P support
- introduce hw version checks
ivpu:
- implement warm boot flow
panfrost:
- add bo sync ioctl
- add GPU_PM_RT support for RZ/G3E SoC
panthor:
- add bo sync ioctl
- enable timestamp propagation
- scheduler robustness improvements
- VM termination fixes
- huge page support
rockchip:
- RK3368 HDMI Support
- get rid of atomic_check fixups
- RK3506 support
- RK3576/RK3588 improved HPD handling
rz-du:
- RZ/V2H(P) MIPI-DSI Support
v3d:
- fix DMA segment size
- convert to new logging helpers
mediatek:
- move DP training to hotplug thread
- convert logging to new helpers
- add support for HS speed DSI
- Genio 510/700/1200-EVK, Radxa NIO-12L HDMI support
atmel-hlcdc:
- switch to drmm resource
- support nomodeset
- use newer helpers
hisilicon:
- fix various DP bugs
renesas:
- fix kernel panic on reboot
exynos:
- fix vidi_connection_ioctl using wrong device
- fix vidi_connection deref user ptr
- fix concurrency regression with vidi_context
vkms:
- add configfs support for display configuration
* tag 'drm-next-2026-02-11' of https://gitlab.freedesktop.org/drm/kernel: (1610 commits)
drm/xe/pm: Disable D3Cold for BMG only on specific platforms
drm/xe: Fix kerneldoc for xe_tlb_inval_job_alloc_dep
drm/xe: Fix kerneldoc for xe_gt_tlb_inval_init_early
drm/xe: Fix kerneldoc for xe_migrate_exec_queue
drm/xe/query: Fix topology query pointer advance
drm/xe/guc: Fix kernel-doc warning in GuC scheduler ABI header
drm/xe/guc: Fix CFI violation in debugfs access.
accel/amdxdna: Move RPM resume into job run function
accel/amdxdna: Fix incorrect DPM level after suspend/resume
nouveau/vmm: start tracking if the LPT PTE is valid. (v6)
nouveau/vmm: increase size of vmm pte tracker struct to u32 (v2)
nouveau/vmm: rewrite pte tracker using a struct and bitfields.
accel/amdxdna: Fix incorrect error code returned for failed chain command
accel/amdxdna: Remove hardware context status
drm/bridge: imx8qxp-pixel-combiner: Fix bailout for imx8qxp_pc_bridge_probe()
drm/panel: ilitek-ili9882t: Remove duplicate initializers in tianma_il79900a_dsc
drm/i915/display: fix the pixel normalization handling for xe3p_lpd
drm/exynos: vidi: use ctx->lock to protect struct vidi_context member variables related to memory alloc/free
drm/exynos: vidi: fix to avoid directly dereferencing user pointer
drm/exynos: vidi: use priv->vidi_dev for ctx lookup in vidi_connection_ioctl()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc updates for 7.0
- Implement masked user access
- Add bpf support for internal only per-CPU instructions and inline the
bpf_get_smp_processor_id() and bpf_get_current_task() functions
- Fix pSeries MSI-X allocation failure when quota is exceeded
- Fix recursive pci_lock_rescan_remove locking in EEH event handling
- Support tailcalls with subprogs & BPF exceptions on 64bit
- Extend "trusted" keys to support the PowerVM Key Wrapping Module
(PKWM)
Thanks to Abhishek Dubey, Christophe Leroy, Gaurav Batra, Guangshuo Li,
Jarkko Sakkinen, Mahesh Salgaonkar, Mimi Zohar, Miquel Sabaté Solà, Nam
Cao, Narayana Murty N, Nayna Jain, Nilay Shroff, Puranjay Mohan, Saket
Kumar Bhaskar, Sourabh Jain, Srish Srinivasan, and Venkat Rao Bagalkote.
* tag 'powerpc-7.0-1' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: (27 commits)
powerpc/pseries: plpks: export plpks_wrapping_is_supported
docs: trusted-encryped: add PKWM as a new trust source
keys/trusted_keys: establish PKWM as a trusted source
pseries/plpks: add HCALLs for PowerVM Key Wrapping Module
pseries/plpks: expose PowerVM wrapping features via the sysfs
powerpc/pseries: move the PLPKS config inside its own sysfs directory
pseries/plpks: fix kernel-doc comment inconsistencies
powerpc/smp: Add check for kcalloc() failure in parse_thread_groups()
powerpc: kgdb: Remove OUTBUFMAX constant
powerpc64/bpf: Additional NVR handling for bpf_throw
powerpc64/bpf: Support exceptions
powerpc64/bpf: Add arch_bpf_stack_walk() for BPF JIT
powerpc64/bpf: Avoid tailcall restore from trampoline
powerpc64/bpf: Support tailcalls with subprogs
powerpc64/bpf: Moving tail_call_cnt to bottom of frame
powerpc/eeh: fix recursive pci_lock_rescan_remove locking in EEH event handling
powerpc/pseries: Fix MSI-X allocation failure when quota is exceeded
powerpc/iommu: bypass DMA APIs for coherent allocations for pre-mapped memory
powerpc64/bpf: Inline bpf_get_smp_processor_id() and bpf_get_current_task/_btf()
powerpc64/bpf: Support internal-only MOV instruction to resolve per-CPU addrs
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"There are are a number of to firmware drivers, in particular the TEE
subsystem:
- a bus callback for TEE firmware that device drivers can register to
- sysfs support for tee firmware information
- minor updates to platform specific TEE drivers for AMD, NXP,
Qualcomm and the generic optee driver
- ARM SCMI firmware refactoring to improve the protocol discover
among other fixes and cleanups
- ARM FF-A firmware interoperability improvements
The reset controller and memory controller subsystems gain support for
additional hardware platforms from Mediatek, Renesas, NXP, Canaan and
SpacemiT.
Most of the other changes are for random drivers/soc code. Among a
number of cleanups and newly added hardware support, including:
- Mediatek MT8196 DVFS power management and mailbox support
- Qualcomm SCM firmware and MDT loader refactoring, as part of the
new Glymur platform support.
- NXP i.MX9 System Manager firmware support for accessing the syslog
- Minor updates for TI, Renesas, Samsung, Apple, Marvell and AMD
SoCs"
* tag 'soc-drivers-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (171 commits)
bus: fsl-mc: fix an error handling in fsl_mc_device_add()
reset: spacemit: Add SpacemiT K3 reset driver
reset: spacemit: Extract common K1 reset code
reset: Create subdirectory for SpacemiT drivers
dt-bindings: soc: spacemit: Add K3 reset support and IDs
reset: canaan: k230: drop OF dependency and enable by default
reset: rzg2l-usbphy-ctrl: Add suspend/resume support
reset: rzg2l-usbphy-ctrl: Propagate the return value of regmap_field_update_bits()
reset: gpio: check the return value of gpiod_set_value_cansleep()
reset: imx8mp-audiomix: Support i.MX8ULP SIM LPAV
reset: imx8mp-audiomix: Extend the driver usage
reset: imx8mp-audiomix: Switch to using regmap API
reset: imx8mp-audiomix: Drop unneeded macros
soc: fsl: qe: qe_ports_ic: Consolidate chained IRQ handler install/remove
soc: mediatek: mtk-cmdq: Add mminfra_offset adjustment for DRAM addresses
soc: mediatek: mtk-cmdq: Extend cmdq_pkt_write API for SoCs without subsys ID
soc: mediatek: mtk-cmdq: Add pa_base parsing for hardware without subsys ID support
soc: mediatek: mtk-cmdq: Add cmdq_get_mbox_priv() in cmdq_pkt_create()
mailbox: mtk-cmdq: Add driver data to support for MT8196
mailbox: mtk-cmdq: Add mminfra_offset configuration for DRAM transaction
...
|
|
Intel platforms are transitioning from traditional SGX-based
attestation toward DICE-based attestation as part of a broader move
toward open and standardized attestation models. DICE enables layered
and extensible attestation, where evidence is accumulated across
multiple boot stages.
With SGX-based attestation, Quote sizes are typically under 8KB, as the
payload consists primarily of Quote data and a small certificate bundle.
Existing TDX guest code sizes the Quote buffer accordingly.
DICE-based attestation produces significantly larger Quotes due to the
inclusion of evidence (certificate chains) from multiple boot layers.
The cumulative Quote size can reach approximately 100KB.
Increase GET_QUOTE_BUF_SIZE to 128KB to ensure sufficient buffer
capacity for DICE-based Quote payloads.
Reviewed-by: Fang Peter <peter.fang@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/20260211001712.1531955-4-sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
The configfs-tsm-report interface can fail with -EFBIG when the
attestation report generated by a TSM provider exceeds internal
maximums (TSM_REPORT_OUTBLOB_MAX). However, this error condition and
its handling are not currently documented in the ABI.
Userspace tools need to understand how to interpret various error
conditions when reading attestation reports.
Document that reads fail with -EFBIG when reports exceed size limits,
with guidance on how to resolve them.
Reviewed-by: Fang Peter <peter.fang@intel.com>
Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Link: https://patch.msgid.link/20260211001712.1531955-2-sathyanarayanan.kuppuswamy@linux.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
This patch introduces /sys/fs/f2fs/<disk>/critical_task_priority, w/
this new sysfs interface, we can tune priority of f2fs_ckpt thread and
f2fs_gc thread.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull performance event updates from Ingo Molnar:
"x86 PMU driver updates:
- Add support for the core PMU for Intel Diamond Rapids (DMR) CPUs
(Dapeng Mi)
Compared to previous iterations of the Intel PMU code, there's been
a lot of changes, which center around three main areas:
- Introduce the OFF-MODULE RESPONSE (OMR) facility to replace the
Off-Core Response (OCR) facility
- New PEBS data source encoding layout
- Support the new "RDPMC user disable" feature
- Likewise, a large series adds uncore PMU support for Intel Diamond
Rapids (DMR) CPUs (Zide Chen)
This centers around these four main areas:
- DMR may have two Integrated I/O and Memory Hub (IMH) dies,
separate from the compute tile (CBB) dies. Each CBB and each IMH
die has its own discovery domain.
- Unlike prior CPUs that retrieve the global discovery table
portal exclusively via PCI or MSR, DMR uses PCI for IMH PMON
discovery and MSR for CBB PMON discovery.
- DMR introduces several new PMON types: SCA, HAMVF, D2D_ULA, UBR,
PCIE4, CRS, CPC, ITC, OTC, CMS, and PCIE6.
- IIO free-running counters in DMR are MMIO-based, unlike SPR.
- Also add support for Add missing PMON units for Intel Panther Lake,
and support Nova Lake (NVL), which largely maps to Panther Lake.
(Zide Chen)
- KVM integration: Add support for mediated vPMUs (by Kan Liang and
Sean Christopherson, with fixes and cleanups by Peter Zijlstra,
Sandipan Das and Mingwei Zhang)
- Add Intel cstate driver to support for Wildcat Lake (WCL) CPUs,
which are a low-power variant of Panther Lake (Zide Chen)
- Add core, cstate and MSR PMU support for the Airmont NP Intel CPU
(aka MaxLinear Lightning Mountain), which maps to the existing
Airmont code (Martin Schiller)
Performance enhancements:
- Speed up kexec shutdown by avoiding unnecessary cross CPU calls
(Jan H. Schönherr)
- Fix slow perf_event_task_exit() with LBR callstacks (Namhyung Kim)
User-space stack unwinding support:
- Various cleanups and refactorings in preparation to generalize the
unwinding code for other architectures (Jens Remus)
Uprobes updates:
- Transition from kmap_atomic to kmap_local_page (Keke Ming)
- Fix incorrect lockdep condition in filter_chain() (Breno Leitao)
- Fix XOL allocation failure for 32-bit tasks (Oleg Nesterov)
Misc fixes and cleanups:
- s390: Remove kvm_types.h from Kbuild (Randy Dunlap)
- x86/intel/uncore: Convert comma to semicolon (Chen Ni)
- x86/uncore: Clean up const mismatch (Greg Kroah-Hartman)
- x86/ibs: Fix typo in dc_l2tlb_miss comment (Xiang-Bin Shi)"
* tag 'perf-core-2026-02-09' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (58 commits)
s390: remove kvm_types.h from Kbuild
uprobes: Fix incorrect lockdep condition in filter_chain()
x86/ibs: Fix typo in dc_l2tlb_miss comment
x86/uprobes: Fix XOL allocation failure for 32-bit tasks
perf/x86/intel/uncore: Convert comma to semicolon
perf/x86/intel: Add support for rdpmc user disable feature
perf/x86: Use macros to replace magic numbers in attr_rdpmc
perf/x86/intel: Add core PMU support for Novalake
perf/x86/intel: Add support for PEBS memory auxiliary info field in NVL
perf/x86/intel: Add core PMU support for DMR
perf/x86/intel: Add support for PEBS memory auxiliary info field in DMR
perf/x86/intel: Support the 4 new OMR MSRs introduced in DMR and NVL
perf/core: Fix slow perf_event_task_exit() with LBR callstacks
perf/core: Speed up kexec shutdown by avoiding unnecessary cross CPU calls
uprobes: use kmap_local_page() for temporary page mappings
arm/uprobes: use kmap_local_page() in arch_uprobe_copy_ixol()
mips/uprobes: use kmap_local_page() in arch_uprobe_copy_ixol()
arm64/uprobes: use kmap_local_page() in arch_uprobe_copy_ixol()
riscv/uprobes: use kmap_local_page() in arch_uprobe_copy_ixol()
perf/x86/intel/uncore: Add Nova Lake support
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto update from Herbert Xu:
"API:
- Fix race condition in hwrng core by using RCU
Algorithms:
- Allow authenc(sha224,rfc3686) in fips mode
- Add test vectors for authenc(hmac(sha384),cbc(aes))
- Add test vectors for authenc(hmac(sha224),cbc(aes))
- Add test vectors for authenc(hmac(md5),cbc(des3_ede))
- Add lz4 support in hisi_zip
- Only allow clear key use during self-test in s390/{phmac,paes}
Drivers:
- Set rng quality to 900 in airoha
- Add gcm(aes) support for AMD/Xilinx Versal device
- Allow tfms to share device in hisilicon/trng"
* tag 'v7.0-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (100 commits)
crypto: img-hash - Use unregister_ahashes in img_{un}register_algs
crypto: testmgr - Add test vectors for authenc(hmac(md5),cbc(des3_ede))
crypto: cesa - Simplify return statement in mv_cesa_dequeue_req_locked
crypto: testmgr - Add test vectors for authenc(hmac(sha224),cbc(aes))
crypto: testmgr - Add test vectors for authenc(hmac(sha384),cbc(aes))
hwrng: core - use RCU and work_struct to fix race condition
crypto: starfive - Fix memory leak in starfive_aes_aead_do_one_req()
crypto: xilinx - Fix inconsistant indentation
crypto: rng - Use unregister_rngs in register_rngs
crypto: atmel - Use unregister_{aeads,ahashes,skciphers}
hwrng: optee - simplify OP-TEE context match
crypto: ccp - Add sysfs attribute for boot integrity
dt-bindings: crypto: atmel,at91sam9g46-sha: add microchip,lan9691-sha
dt-bindings: crypto: atmel,at91sam9g46-aes: add microchip,lan9691-aes
dt-bindings: crypto: qcom,inline-crypto-engine: document the Milos ICE
crypto: caam - fix netdev memory leak in dpaa2_caam_probe
crypto: hisilicon/qm - increase wait time for mailbox
crypto: hisilicon/qm - obtain the mailbox configuration at one time
crypto: hisilicon/qm - remove unnecessary code in qm_mb_write()
crypto: hisilicon/qm - move the barrier before writing to the mailbox register
...
|
|
Pull documentation updates from Jonathan Corbet:
"A slightly calmer cycle for docs this time around, though there is
still a fair amount going on, including:
- Some signs of life on the long-moribund Japanese translation
- Documentation on policies around the use of generative tools for
patch submissions, and a separate document intended for consumption
by generative tools
- The completion of the move of the documentation tools to
tools/docs. For now we're leaving a /scripts/kernel-doc symlink
behind to avoid breaking scripts
- Ongoing build-system work includes the incorporation of
documentation in Python code, better support for documenting
variables, and lots of improvements and fixes
- Automatic linking of man-page references -- cat(1), for example --
to the online pages in the HTML build
...and the usual array of typo fixes and such"
* tag 'docs-7.0' of git://git.kernel.org/pub/scm/linux/kernel/git/docs/linux: (107 commits)
doc: development-process: add notice on testing
tools: sphinx-build-wrapper: improve its help message
docs: sphinx-build-wrapper: allow -v override -q
docs: kdoc: Fix pdfdocs build for tools
docs: ja_JP: process: translate 'Obtain a current source tree'
docs: fix 're-use' -> 'reuse' in documentation
docs: ioctl-number: fix a typo in ioctl-number.rst
docs: filesystems: ensure proc pid substitutable is complete
docs: automarkup.py: Skip common English words as C identifiers
Documentation: use a source-read extension for the index link boilerplate
docs: parse_features: make documentation more consistent
docs: add parse_features module documentation
docs: jobserver: do some documentation improvements
docs: add jobserver module documentation
docs: kabi: helpers: add documentation for each "enum" value
docs: kabi: helpers: add helper for debug bits 7 and 8
docs: kabi: system_symbols: end docstring phrases with a dot
docs: python: abi_regex: do some improvements at documentation
docs: python: abi_parser: do some improvements at documentation
docs: add kabi modules documentation
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux
Pull block updates from Jens Axboe:
- Support for batch request processing for ublk, improving the
efficiency of the kernel/ublk server communication. This can yield
nice 7-12% performance improvements
- Support for integrity data for ublk
- Various other ublk improvements and additions, including a ton of
selftests additions and updated
- Move the handling of blk-crypto software fallback from below the
block layer to above it. This reduces the complexity of dealing with
bio splitting
- Series fixing a number of potential deadlocks in blk-mq related to
the queue usage counter and writeback throttling and rq-qos debugfs
handling
- Add an async_depth queue attribute, to resolve a performance
regression that's been around for a qhilw related to the scheduler
depth handling
- Only use task_work for IOPOLL completions on NVMe, if it is necessary
to do so. An earlier fix for an issue resulted in all these
completions being punted to task_work, to guarantee that completions
were only run for a given io_uring ring when it was local to that
ring. With the new changes, we can detect if it's necessary to use
task_work or not, and avoid it if possible.
- rnbd fixes:
- Fix refcount underflow in device unmap path
- Handle PREFLUSH and NOUNMAP flags properly in protocol
- Fix server-side bi_size for special IOs
- Zero response buffer before use
- Fix trace format for flags
- Add .release to rnbd_dev_ktype
- MD pull requests via Yu Kuai
- Fix raid5_run() to return error when log_init() fails
- Fix IO hang with degraded array with llbitmap
- Fix percpu_ref not resurrected on suspend timeout in llbitmap
- Fix GPF in write_page caused by resize race
- Fix NULL pointer dereference in process_metadata_update
- Fix hang when stopping arrays with metadata through dm-raid
- Fix any_working flag handling in raid10_sync_request
- Refactor sync/recovery code path, improve error handling for
badblocks, and remove unused recovery_disabled field
- Consolidate mddev boolean fields into mddev_flags
- Use mempool to allocate stripe_request_ctx and make sure
max_sectors is not less than io_opt in raid5
- Fix return value of mddev_trylock
- Fix memory leak in raid1_run()
- Add Li Nan as mdraid reviewer
- Move phys_vec definitions to the kernel types, mostly in preparation
for some VFIO and RDMA changes
- Improve the speed for secure erase for some devices
- Various little rust updates
- Various other minor fixes, improvements, and cleanups
* tag 'for-7.0/block-20260206' of git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux: (162 commits)
blk-mq: ABI/sysfs-block: fix docs build warnings
selftests: ublk: organize test directories by test ID
block: decouple secure erase size limit from discard size limit
block: remove redundant kill_bdev() call in set_blocksize()
blk-mq: add documentation for new queue attribute async_dpeth
block, bfq: convert to use request_queue->async_depth
mq-deadline: covert to use request_queue->async_depth
kyber: covert to use request_queue->async_depth
blk-mq: add a new queue sysfs attribute async_depth
blk-mq: factor out a helper blk_mq_limit_depth()
blk-mq-sched: unify elevators checking for async requests
block: convert nr_requests to unsigned int
block: don't use strcpy to copy blockdev name
blk-mq-debugfs: warn about possible deadlock
blk-mq-debugfs: add missing debugfs_mutex in blk_mq_debugfs_register_hctxs()
blk-mq-debugfs: remove blk_mq_debugfs_unregister_rqos()
blk-mq-debugfs: make blk_mq_debugfs_register_rqos() static
blk-rq-qos: fix possible debugfs_mutex deadlock
blk-mq-debugfs: factor out a helper to register debugfs for all rq_qos
blk-wbt: fix possible deadlock to nest pcpu_alloc_mutex under q_usage_counter
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs
Pull erofs updates from Gao Xiang:
"In this cycle, inode page cache sharing among filesystems on the same
machine is now supported, which is particularly useful for
high-density hosts running tens of thousands of containers.
In addition, we fully isolate the EROFS core on-disk format from other
optional encoded layouts since the core on-disk part is designed to be
simple, effective, and secure. Users can use the core format to build
unique golden immutable images and import their filesystem trees
directly from raw block devices via DMA, page-mapped DAX devices,
and/or file-backed mounts without having to worry about unnecessary
intrinsic consistency issues found in other generic filesystems by
design. However, the full vision is still working in progress and will
spend more time to achieve final goals.
There are other improvements and bug fixes as usual, as listed below:
- Support inode page cache sharing among filesystems
- Formally separate optional encoded (aka compressed) inode layouts
(and the implementations) from the EROFS core on-disk aligned plain
format for future zero-trust security usage
- Improve performance by caching the fact that an inode does not have
a POSIX ACL
- Improve LZ4 decompression error reporting
- Enable LZMA by default and promote DEFLATE and Zstandard algorithms
out of EXPERIMENTAL status
- Switch to inode_set_cached_link() to cache symlink lengths
- random bugfixes and minor cleanups"
* tag 'erofs-for-7.0-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/xiang/erofs: (31 commits)
erofs: fix UAF issue for file-backed mounts w/ directio option
erofs: update compression algorithm status
erofs: fix inline data read failure for ztailpacking pclusters
erofs: avoid some unnecessary #ifdefs
erofs: handle end of filesystem properly for file-backed mounts
erofs: separate plain and compressed filesystems formally
erofs: use inode_set_cached_link()
erofs: mark inodes without acls in erofs_read_inode()
erofs: implement .fadvise for page cache share
erofs: support compressed inodes for page cache share
erofs: support unencoded inodes for page cache share
erofs: pass inode to trace_erofs_read_folio
erofs: introduce the page cache share feature
erofs: using domain_id in the safer way
erofs: add erofs_inode_set_aops helper to set the aops
erofs: support user-defined fingerprint name
erofs: decouple `struct erofs_anon_fs_type`
fs: Export alloc_empty_backing_file
erofs: tidy up erofs_init_inode_xattrs()
erofs: add missing documentation about `directio` mount option
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux
Pull i3c updates from Alexandre Belloni:
"Subsystem:
- add sysfs entry and attribute for Device NACK Retry count
Drivers:
- dw: Device NACK Retry configuration knob
- mipi-i3c-hci: support multi-bus instances, runtime PM, and suspend
- renesas: suspend/resume support"
* tag 'i3c/for-6.20' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux: (52 commits)
i3c: dw-i3c-master: fix SIR reject bit mapping for dynamic addresses
i3c: dw-i3c-master: convert spinlock usage to scoped guards
i3c: dw: Fix memory leak in dw_i3c_master_i2c_xfers()
i3c: mipi-i3c-hci-pci: Add System Suspend support
i3c: mipi-i3c-hci: Add optional System Suspend support
i3c: master: Add i3c_master_do_daa_ext() for post-hibernation address recovery
i3c: dw: Initialize spinlock to avoid upsetting lockdep
i3c: mipi-i3c-hci-pci: Add Runtime PM support
i3c: mipi-i3c-hci: Add optional Runtime PM support
i3c: master: Introduce optional Runtime PM support
i3c: mipi-i3c-hci: Factor out master dynamic address setting into helper
i3c: mipi-i3c-hci: Allow core re-initialization for Runtime PM support
i3c: mipi-i3c-hci: Factor out core initialization into helper
i3c: mipi-i3c-hci: Factor out IO mode setting into helper
i3c: mipi-i3c-hci: Factor out software reset into helper
i3c: mipi-i3c-hci: Add PIO suspend and resume support
i3c: mipi-i3c-hci: Refactor PIO register initialization
i3c: mipi-i3c-hci: Add DMA suspend and resume support
i3c: mipi-i3c-hci: Extract ring initialization from hci_dma_init()
i3c: mipi-i3c-hci: Introduce helper to restore DAT
...
|
|
The boot integrity attribute represents that the CPU or APU is used for the
hardware root of trust in the boot process. This bit only represents the
CPU/APU and some vendors have other hardware root of trust implementations
specific to their designs.
Link: https://github.com/fwupd/fwupd/pull/9825
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Clean up the async_depth documentation:
- insert blank lines before and after lists where needed
- convert verb tense in a few places
- make lines fit within 80 characters
Documentation/ABI/stable/sysfs-block:612: ERROR: Unexpected indentation. [docutils]
Documentation/ABI/stable/sysfs-block:612: ERROR: Unexpected indentation. [docutils]
Documentation/ABI/stable/sysfs-block:612: ERROR: Unexpected indentation. [docutils]
Fixes: 2c04718edcd5 ("blk-mq: add documentation for new queue attribute async_dpeth")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Explain the attribute and the default value in different case.
Signed-off-by: Yu Kuai <yukuai@fnnas.com>
Reviewed-by: Nilay Shroff <nilay@linux.ibm.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
The EROFS on-disk format uses a tiny, plain metadata design that
prioritizes performance and minimizes complex inconsistencies against
common writable disk filesystems (almost all serious metadata
inconsistency cannot happen in well-designed immutable filesystems like
EROFS). EROFS deliberately avoids artificial design flaws to eliminate
serious security risks from untrusted remote sources by design,
although human-made implementation bugs can still happen sometimes.
Currently, there is no strict check to prevent compressed inodes,
especially LZ4-compressed inodes, from being read in plain filesystems.
Starting with erofs-utils 1.0 and Linux 5.3, LZ4_0PADDING sb feature
is automatically enabled for LZ4-compressed EROFS images to support
in-place decompression. Furthermore, since Linux 5.4 LTS is no longer
supported, we no longer need to handle ancient LZ4-compressed EROFS
images generated by erofs-utils prior to 1.0.
To formally distinguish different filesystem types for improved
security:
- Use the presence of LZ4_0PADDING or a non-zero
`dsb->u1.lz4_max_distance` as a marker for compressed filesystems
containing LZ4-compressed inodes only;
- For other algorithms, use `dsb->u1.available_compr_algs` bitmap.
Note: LZ4_0PADDING has been supported since Linux 5.4 (the first formal
kernel version), so exposing it via sysfs is no longer necessary and is
now deprecated (but remain it for five more years until 2031):
`dsb->u1` has been strictly non-zero for all EROFS images containing
compressed inodes starting with erofs-utils v1.3 and it is actually
a much better marker for compressed filesystems.
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Signed-off-by: Rhys Tumelty <rhys@tumelty.co.uk>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Message-ID: <20260128220233.179439-1-rhys@tumelty.co.uk>
|
|
If userspace thread has held f2fs rw semaphore, due to its low priority,
it could be runnable or preempted state for long time, during the time,
it will block high priority thread which is trying to grab the same rw
semaphore, e.g. cp_rwsem, io_rwsem...
To fix such issue, let's detect thread's priority when it tries to grab
f2fs_rwsem lock, if the priority is lower than a priority threshold, let's
uplift the priority before it enters into critical region of lock, and
restore the priority after it leaves from critical region.
Meanwhile, introducing two new sysfs nodes:
- /sys/fs/f2fs/<disk>/adjust_lock_priority, it is used to control whether
the functionality is enable or not.
========== ==================
Flag_Value Flag_Description
========== ==================
0x00000000 Disabled (default)
0x00000001 cp_rwsem
0x00000002 node_change
0x00000004 node_write
0x00000008 gc_lock
0x00000010 cp_global
0x00000020 io_rwsem
========== ==================
- /sys/fs/f2fs/<disk>/lock_duration_priority, it is used to control
priority threshold.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Starting with Power11, PowerVM supports a new feature called "Key Wrapping"
that protects user secrets by wrapping them using a hypervisor generated
wrapping key. The status of this feature can be read by the
H_PKS_GET_CONFIG HCALL.
Expose the Power LPAR Platform KeyStore (PLPKS) wrapping features config
via the sysfs file /sys/firmware/plpks/config/wrapping_features.
Signed-off-by: Srish Srinivasan <ssrish@linux.ibm.com>
Tested-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260127145228.48320-4-ssrish@linux.ibm.com
|
|
The /sys/firmware/secvar/config directory represents Power LPAR Platform
KeyStore (PLPKS) configuration properties such as max_object_size, signed_
update_algorithms, supported_policies, total_size, used_space, and version.
These attributes describe the PLPKS, and not the secure boot variables
(secvars).
Create /sys/firmware/plpks directory and move the PLPKS config inside this
directory. For backwards compatibility, create a soft link from the secvar
sysfs directory to this config and emit a warning stating that the older
sysfs path has been deprecated. Separate out the plpks specific
documentation from secvar.
Signed-off-by: Srish Srinivasan <ssrish@linux.ibm.com>
Tested-by: Nayna Jain <nayna@linux.ibm.com>
Reviewed-by: Mimi Zohar <zohar@linux.ibm.com>
Reviewed-by: Nayna Jain <nayna@linux.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: https://patch.msgid.link/20260127145228.48320-3-ssrish@linux.ibm.com
|
|
Linux 6.19-rc7
This is needed for msm and rust trees.
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
In order to simulate skipped write during enable_checkpoint().
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-next
drm-misc-next for 6.20:
Core Changes:
- buddy: Fix free_trees memory leak, prevent a BUG_ON
- dma-buf: Start to introduce cgroup memory accounting in heaps, Remove
sysfs stats, add new tracepoints
- hdmi: Limit infoframes exposure to userspace based on driver
capabilities
- property: Account for property blobs in memcg
Driver Changes:
- atmel-hlcdc: Switch to drmm resources, Support nomodeset parameter,
various patches to use newish helpers and fix memory safety bugs
- hisilicon: Fix various DisplayPort related bugs
- imagination: Introduce hardware version checks
- renesas: Fix kernel panic on reboot
- rockchip: Fix RK3576 HPD interrupt handling, Improve RK3588 HPD
interrupt handling
- v3d: Convert to drm logging helpers
- bridge:
- Continuation of the refcounting effort
- new bridge: Algoltek AG6311
- panel:
- new panel: Anbernic RG-DS
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maxime Ripard <mripard@redhat.com>
Link: https://patch.msgid.link/20260122-antique-sexy-junglefowl-1bc5a8@houat
|
|
The proposed ABI failed to account for multiple host bridges with the same
stream name. The fix needs to namespace streams or otherwise link back to
the host bridge, but a change like that is too big for a fix. Given this
ABI never saw a released kernel, delete it for now and bring it back later
with this issue addressed.
Reported-by: Xu Yilun <yilun.xu@linux.intel.com>
Reported-by: Yi Lai <yi1.lai@intel.com>
Closes: http://lore.kernel.org/20251223085601.2607455-1-yilun.xu@linux.intel.com
Link: http://patch.msgid.link/6972c872acbb9_1d3310035@dwillia2-mobl4.notmuch
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
|
|
- Get rid of `sbi->opt.max_sync_decompress_pages` since it's fixed as
3 all the time;
- Add Z_EROFS_MAX_SYNC_DECOMPRESS_BYTES in bytes instead of in pages,
since for non-4K pages, 3-page limitation makes no sense;
- Move `sync_decompress` to sbi to avoid unexpected remount impact;
- Fold z_erofs_is_sync_decompress() into its caller;
- Better description of sysfs entry `sync_decompress`.
Reviewed-by: Chao Yu <chao@kernel.org>
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
|
|
Update DAMON ABI document for the newly added DAMON sysfs interface file,
max_nr_snapshots.
Link: https://lkml.kernel.org/r/20251216080128.42991-12-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Update DAMON ABI document for the newly added damos stat, nr_snapshots.
Link: https://lkml.kernel.org/r/20251216080128.42991-6-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Cc: "Masami Hiramatsu (Google)" <mhiramat@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Add missing writeback_batch_size documentation.
Link: https://lkml.kernel.org/r/20251201094754.4149975-4-senozhatsky@chromium.org
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Brian Geffon <bgeffon@google.com>
Cc: David Stevens <stevensd@google.com>
Cc: Minchan Kim <minchan@google.com>
Cc: Richard Chang <richardycc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Introduce witeback_compressed device attribute to toggle compressed
writeback (decompression on demand) feature.
[senozhatsky@chromium.org: rewrote original patch, added documentation]
Link: https://lkml.kernel.org/r/20251201094754.4149975-3-senozhatsky@chromium.org
Signed-off-by: Richard Chang <richardycc@google.com>
Co-developed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Brian Geffon <bgeffon@google.com>
Cc: David Stevens <stevensd@google.com>
Cc: Minchan Kim <minchan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Commit bdb8d06dfefd ("dmabuf: Add the capability to expose DMA-BUF stats
in sysfs") added dmabuf statistics to sysfs in 2021 under
CONFIG_DMABUF_SYSFS_STATS. After being used in production, performance
problems were discovered leading to its deprecation in 2022 in commit
e0a9f1fe206a ("dma-buf: deprecate DMABUF_SYSFS_STATS"). Some of the
problems with this interface were discussed in my LPC 2025 talk. [1][2]
Android was probably the last user of the interface, which has since
been migrated to use the dmabuf BPF iterator [3] to obtain the same
information more cheaply. As promised in that series, now that the
longterm stable 6.18 kernel has been released let's remove the sysfs
dmabuf statistics from the kernel.
[1] https://www.youtube.com/watch?v=D83qygudq9c
[2] https://lpc.events/event/19/contributions/2118/
[3] https://lore.kernel.org/all/20250522230429.941193-1-tjmercier@google.com/
Signed-off-by: T.J. Mercier <tjmercier@google.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sumit Semwal <sumit.semwal@linaro.org>
Link: https://patch.msgid.link/20260116190517.3268458-1-tjmercier@google.com
|
|
__blkdev_issue_discard() in __submit_discard_cmd() will never fail, so
let's make FAULT_DISCARD fault injection obsolete.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
Starting with Panther Cove, the rdpmc user disable feature is supported.
This feature allows the perf system to disable user space rdpmc reads at
the counter level.
Currently, when a global counter is active, any user with rdpmc rights
can read it, even if perf access permissions forbid it (e.g., disallow
reading ring 0 counters). The rdpmc user disable feature mitigates this
security concern.
Details:
- A new RDPMC_USR_DISABLE bit (bit 37) in each EVNTSELx MSR indicates
that the GP counter cannot be read by RDPMC in ring 3.
- New RDPMC_USR_DISABLE bits in IA32_FIXED_CTR_CTRL MSR (bits 33, 37,
41, 45, etc.) for fixed counters 0, 1, 2, 3, etc.
- When calling rdpmc instruction for counter x, the following pseudo
code demonstrates how the counter value is obtained:
If (!CPL0 && RDPMC_USR_DISABLE[x] == 1) ? 0 : counter_value;
- RDPMC_USR_DISABLE is enumerated by CPUID.0x23.0.EBX[2].
This patch extends the current global user space rdpmc control logic via
the sysfs interface (/sys/devices/cpu/rdpmc) as follows:
- rdpmc = 0:
Global user space rdpmc and counter-level user space rdpmc for all
counters are both disabled.
- rdpmc = 1:
Global user space rdpmc is enabled during the mmap-enabled time window,
and counter-level user space rdpmc is enabled only for non-system-wide
events. This prevents counter data leaks as count data is cleared
during context switches.
- rdpmc = 2:
Global user space rdpmc and counter-level user space rdpmc for all
counters are enabled unconditionally.
The new rdpmc settings only affect newly activated perf events; currently
active perf events remain unaffected. This simplifies and cleans up the
code. The default value of rdpmc remains unchanged at 1.
For more details about rdpmc user disable, please refer to chapter 15
"RDPMC USER DISABLE" in ISE documentation.
Signed-off-by: Dapeng Mi <dapeng1.mi@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://patch.msgid.link/20260114011750.350569-8-dapeng1.mi@linux.intel.com
|
|
Add a generic TEE revision sysfs attribute backed by a new
optional get_tee_revision() callback. The revision string is
diagnostic-only and must not be used to infer feature support.
Signed-off-by: Aristo Chen <aristo.chen@canonical.com>
Reviewed-by: Sumit Garg <sumit.garg@oss.qualcomm.com>
Signed-off-by: Jens Wiklander <jens.wiklander@linaro.org>
|
|
Document sysfs attribute dev_nack_retry_cnt that controls the number of
automatic retries performed by the I3C controller when a target device
returns a NACK
Add a `dev_nack_retry_count` sysfs attribute to allow reading and updating
the device NACK retry count. A new `dev_nack_retry_count` field and an
optional `set_dev_nack_retry()` callback are added to
i3c_master_controller. The attribute is created only when the callback is
implemented.
Updates are applied under the I3C bus maintenance lock to ensure safe
hardware reconfiguration.
Signed-off-by: Adrian Ng Ho Yin <adrianhoyin.ng@altera.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://patch.msgid.link/3c4b5082bde64024fc383c44bebeef89ad3c7ed3.1765529948.git.adrianhoyin.ng@altera.com
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
|
|
Expose individual VRAM temperature attributes.
Update Xe hwmon documentation for this entry.
v2:
- Avoid using default switch case for VRAM individual temperatures.
- Append labels with VRAM channel number.
- Update kernel version in Xe hwmon documentation.
v3:
- Add missing brackets in Xe hwmon documentation from VRAM channel sysfs.
- Reorder BMG_VRAM_TEMPERATURE_N macro in xe_pcode_regs.h.
- Add api to check if VRAM is available on the channel.
v4:
- Improve VRAM label handling to eliminate temp variable by
introducing a dedicated array vram_label in xe_hwmon_thermal_info.
- Remove a magic number.
- Change the label from vram_X to vram_ch_X.
v5:
- Address review comments from Raag.
- Change vram to VRAM in commit title and subject.
- Refactor BMG_VRAM_TEMPERATURE_N macro.
- Refactor is_vram_ch_available().
- Rephrase a comment.
- Check individual VRAM temperature limits in addition to VRAM
availability in xe_hwmon_temp_is_visible. (Raag)
- Move VRAM label change out of this patch.
v6:
- Use in_range() for VRAM_N index check instead of if check. (Raag)
- Minor aesthetic changes.
Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://patch.msgid.link/20260112203521.1014388-5-karthik.poosa@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Expose GPU PCIe average temperature and its limits via hwmon sysfs entry
temp5_xxx.
Update Xe hwmon sysfs documentation for this.
v2: Update kernel version in Xe hwmon documentation. (Raag)
v3:
- Address review comments from Raag.
- Remove redundant debug log.
- Update kernel version in Xe hwmon documentation. (Raag)
v4:
- Address review comments from Raag.
- Group new temperature attributes with existing temperature attributes
as per channel index in Xe hwmon documentation.
- Use TEMP_MASK instead of TEMP_MASK_MAILBOX.
- Add PCIE_SENSOR_MASK which uses REG_FIELD_GET as replacement of
PCIE_SENSOR_SHIFT.
v5:
- Address review comments from Raag.
- Use REG_FIELD_GET to get PCIe temperature.
- Move PCIE_SENSOR_GROUP_ID and PCIE_SENSOR_MASK to xe_pcode_api.h
- Cosmetic change.
Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://patch.msgid.link/20260112203521.1014388-4-karthik.poosa@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Expose GPU memory controller average temperature and its limits under
temp4_xxx.
Update Xe hwmon documentation for this.
v2:
- Rephrase commit message. (Badal)
- Update kernel version in Xe hwmon documentation. (Raag)
v3:
- Update kernel version in Xe hwmon documentation.
- Address review comments from Raag.
- Remove obvious comments.
- Remove redundant debug logs.
- Remove unnecessary checks.
- Avoid magic numbers.
- Add new comments.
- Use temperature sensors count to make memory controller visible.
- Use temperature limits of package for memory controller.
v4:
- Address review comments from Raag.
- Group new temperature attributes with existing temperature attributes
as per channel index in Xe hwmon documentation.
- Use DIV_ROUND_UP to calculate dwords needed for temperature limits.
- Minor aesthetic refinements.
- Remove unused TEMP_MASK_MAILBOX.
v5:
- Use REG_FIELD_GET to get count from READ_THERMAL_DATA output. (Raag)
- Change count print from decimal to hexadecimal.
- Cosmetic changes.
Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://patch.msgid.link/20260112203521.1014388-3-karthik.poosa@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
Read temperature limits using pcode mailbox and expose shutdown
temperature limit as tempX_emergency, critical temperature limit as
tempX_crit and GPU max temperature limit as temp2_max.
Update Xe hwmon documentation with above entries.
v2:
- Resolve a documentation warning.
- Address below review comments from Raag.
- Update date and kernel version in Xe hwmon documentation.
- Remove explicit disable of has_mbx_thermal_info for unsupported
platforms.
- Remove unnecessary default case in switches.
- Remove obvious comments.
- Use TEMP_LIMIT_MAX to compute number of dwords needed in
xe_hwmon_thermal_info.
- Remove THERMAL_LIMITS_DWORDS macro.
- Use has_mbx_thermal_info for checking thermal mailbox support.
v3:
- Address below minor comments. (Raag)
- Group new temperature attributes with existing temperature attributes
as per channel index in Xe hwmon documentation.
- Rename enums of xe_temp_limit to improve clarity.
- Use DIV_ROUND_UP to calculate dwords needed for temperature limits.
- Use return instead of breaks in xe_hwmon_temp_read.
- Minor aesthetic refinements.
v4:
- Remove a redundant break. (Raag)
- Update drm_dbg to drm_warn to inform user of unavailability for
thermal mailbox on expected platforms.
Signed-off-by: Karthik Poosa <karthik.poosa@intel.com>
Reviewed-by: Raag Jadav <raag.jadav@intel.com>
Link: https://patch.msgid.link/20260112203521.1014388-2-karthik.poosa@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
In a vain attempt to consolidate the email zoo switch everything to the
kernel.org account.
Signed-off-by: Thomas Gleixner <tglx@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This patch adds a new sysfs node in /sys/fs/f2fs/<disk>/inject_lock_timeout,
it relies on CONFIG_F2FS_FAULT_INJECTION kernel config.
It can be used to simulate different type of timeout in lock duration.
========== ===============================
Flag_Value Flag_Description
========== ===============================
0x00000000 No timeout (default)
0x00000001 Simulate running time
0x00000002 Simulate IO type sleep time
0x00000003 Simulate Non-IO type sleep time
0x00000004 Simulate runnable time
========== ===============================
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch introduce a new fault type FAULT_LOCK_TIMEOUT, it can
be used to inject timeout into lock duration.
Timeout type can be set via /sys/fs/f2fs/<disk>/inject_timeout_type
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
No logic changes.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
This patch add a new sysfs node in /sys/fs/f2fs/<device>/max_lock_elapsed_time.
This is a threshold, once a thread enters critical region that lock covers,
total elapsed time exceeds this threshold, f2fs will print tracepoint to dump
information of related context. This sysfs entry can be used to control the
value of threshold, by default, the value is 500 ms.
Signed-off-by: Chao Yu <chao@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The commit 8a2d9f00d has been updated to set its default value to "rt,3",
fixing the outdated default value in the F2FS documentation.
Signed-off-by: ZhaoYueNan <amktiao030215@gmail.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
|
|
The sample values for `family` and `machine` were swapped relative to
what the driver actually does, and doesn't match the field description.
Fixes: da5a70f3519f ("Documentation: add information for new sysfs soc bus functionality")
Reviewed-by: Lee Jones <lee@kernel.org>
Signed-off-by: Matthew Maurer <mmaurer@google.com>
Link: https://patch.msgid.link/20251226-soc-bindings-v4-2-2c2fac08f820@google.com
Signed-off-by: Danilo Krummrich <dakr@kernel.org>
|
|
Backmerging to bring in 6.19-rc1. An important upstream bugfix and
to help unblock PTL CI.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"Subsystem:
- stop setting max_user_freq from the individual drivers as this has
not been hardware related for a while
New drivers:
- Andes ATCRTC100
- Apple SMC
- Nvidia VRS
Drivers:
- renesas-rtca3: add RZ/V2H support
- tegra: add ACPI support"
* tag 'rtc-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (34 commits)
rtc: spacemit: MFD_SPACEMIT_P1 as dependencies
rtc: atcrtc100: Fix signedness bug in probe()
rtc: max31335: Fix ignored return value in set_alarm
rtc: gamecube: Check the return value of ioremap()
Documentation: ABI: testing: Fix "upto" typo in rtc-cdev
rtc: Add new rtc-macsmc driver for Apple Silicon Macs
dt-bindings: rtc: Add Apple SMC RTC
MAINTAINERS: drop unneeded file entry in NVIDIA VRS RTC DRIVER
rtc: isl12026: Add id_table
rtc: renesas-rtca3: Add support for multiple reset lines
dt-bindings: rtc: renesas,rz-rtca3: Add RZ/V2H support
rtc: tegra: Replace deprecated SIMPLE_DEV_PM_OPS
rtc: tegra: Add ACPI support
rtc: tegra: Use devm_clk_get_enabled() in probe
rtc: Kconfig: add MC34708 to mc13xxx help text
rtc: s35390a: use u8 instead of char for register buffer
rtc: nvvrs: add NVIDIA VRS RTC device driver
dt-bindings: rtc: Document NVIDIA VRS RTC
rtc: atcrtc100: Add ATCRTC100 RTC driver
MAINTAINERS: Add entry for ATCRTC100 RTC driver
...
|
