| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio driver updates for 6.19-rc1. Lots
of stuff in here including:
- lots of IIO driver updates, cleanups, and additions
- large interconnect driver changes as they get converted over to a
dynamic system of ids
- coresight driver updates
- mwave driver updates
- binder driver updates and changes
- comedi driver fixes now that the fuzzers are being set loose on
them
- nvmem driver updates
- new uio driver addition
- lots of other small char/misc driver updates, full details in the
shortlog
All of these have been in linux-next for a while now"
* tag 'char-misc-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (304 commits)
char: applicom: fix NULL pointer dereference in ac_ioctl
hangcheck-timer: fix coding style spacing
hangcheck-timer: Replace %Ld with %lld
hangcheck-timer: replace printk(KERN_CRIT) with pr_crit
uio: Add SVA support for PCI devices via uio_pci_generic_sva.c
dt-bindings: slimbus: fix warning from example
intel_th: Fix error handling in intel_th_output_open
misc: rp1: Fix an error handling path in rp1_probe()
char: xillybus: add WQ_UNBOUND to alloc_workqueue users
misc: bh1770glc: use pm_runtime_resume_and_get() in power_state_store
misc: cb710: Fix a NULL vs IS_ERR() check in probe()
mux: mmio: Add suspend and resume support
virt: acrn: split acrn_mmio_dev_res out of acrn_mmiodev
greybus: gb-beagleplay: Fix timeout handling in bootloader functions
greybus: add WQ_PERCPU to alloc_workqueue users
char/mwave: drop typedefs
char/mwave: drop printk wrapper
char/mwave: remove printk tracing
char/mwave: remove unneeded fops
char/mwave: remove MWAVE_FUTZ_WITH_OTHER_DEVICES ifdeffery
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"This is the first half of the driver changes:
- A treewide interface change to the "syscore" operations for power
management, as a preparation for future Tegra specific changes
- Reset controller updates with added drivers for LAN969x, eic770 and
RZ/G3S SoCs
- Protection of system controller registers on Renesas and Google
SoCs, to prevent trivially triggering a system crash from e.g.
debugfs access
- soc_device identification updates on Nvidia, Exynos and Mediatek
- debugfs support in the ST STM32 firewall driver
- Minor updates for SoC drivers on AMD/Xilinx, Renesas, Allwinner, TI
- Cleanups for memory controller support on Nvidia and Renesas"
* tag 'soc-drivers-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (114 commits)
memory: tegra186-emc: Fix missing put_bpmp
Documentation: reset: Remove reset_controller_add_lookup()
reset: fix BIT macro reference
reset: rzg2l-usbphy-ctrl: Fix a NULL vs IS_ERR() bug in probe
reset: th1520: Support reset controllers in more subsystems
reset: th1520: Prepare for supporting multiple controllers
dt-bindings: reset: thead,th1520-reset: Add controllers for more subsys
dt-bindings: reset: thead,th1520-reset: Remove non-VO-subsystem resets
reset: remove legacy reset lookup code
clk: davinci: psc: drop unused reset lookup
reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S SoC
reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY
dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support
reset: eswin: Add eic7700 reset driver
dt-bindings: reset: eswin: Documentation for eic7700 SoC
reset: sparx5: add LAN969x support
dt-bindings: reset: microchip: Add LAN969x support
soc: rockchip: grf: Add select correct PWM implementation on RK3368
soc/tegra: pmc: Add USB wake events for Tegra234
amba: tegra-ahb: Fix device leak on SMMU enable
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/drivers
STM32 Firewall bus for v6.19, round 1
Highlights:
----------
The STM32MP21x platforms have a slightly different RIFSC. Add support
for these platforms.
Also, the RIF is a complex firewall framework which can be tricky
to debug. To facilitate the latter, add a debugfs entry that can
be used to display the whole RIFSC firewall configuration at runtime.
* tag 'stm32-bus-firewall-for-v6.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
bus: rifsc: add debugfs entry to dump the firewall configuration
dt-bindings: bus: add stm32mp21 RIFSC compatible
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap into soc/drivers
ti-sysc: allow OMAP2 and OMAP4 timers to be reserved on AM33xx
* tag 'omap-for-v6.19/drivers-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap:
ti-sysc: allow OMAP2 and OMAP4 timers to be reserved on AM33xx
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/drivers
Allwinner driver changes for 6.19
Just one cleanup change that is part of tree wide cleanup of redundant
pm_runtime_mark_last_busy() calls.
* tag 'sunxi-drivers-for-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
bus: sunxi-rsb: Remove redundant pm_runtime_mark_last_busy() calls
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
T99W760 modem is based on Qualcomm SDX35 chipset. It uses the same channel
configurations of Foxconn SDX61 modem. Hence, add support for it by reusing
the 'modem_foxconn_sdx61_config' config structure.
The EDL firmware for this modem has been pushed to linux-firmware.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
[mani: reworded description]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20251119105615.48295-2-slark_xiao@163.com
|
|
Several drivers can benefit from registering per-instance data along
with the syscore operations. To achieve this, move the modifiable fields
out of the syscore_ops structure and into a separate struct syscore that
can be registered with the framework. Add a void * driver data field for
drivers to store contextual data that will be passed to the syscore ops.
Acked-by: Rafael J. Wysocki (Intel) <rafael@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
RIFSC configuration can be difficult to debug. Add a debugfs entry
that dumps the configuration of the RISUPs, the RISALs and the RIMUs.
This will allow to display the whole RIFSC firewall configuration at
runtime.
While there, fix a bug on the computation of firewall entries in the
probe function.
Signed-off-by: Gatien Chevallier <gatien.chevallier@foss.st.com>
Link: https://lore.kernel.org/r/20251106-rifsc_debugfs-v2-3-f90e94ae756d@foss.st.com
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
|
|
Currently if a user enqueue a work item using schedule_delayed_work() the
used wq is "system_wq" (per-cpu wq) while queue_delayed_work() use
WORK_CPU_UNBOUND (used when a cpu is not specified). The same applies to
schedule_work() that is using system_wq and queue_work(), that makes use
again of WORK_CPU_UNBOUND.
This lack of consistency cannot be addressed without refactoring the API.
alloc_workqueue() treats all queues as per-CPU by default, while unbound
workqueues must opt-in via WQ_UNBOUND.
This default is suboptimal: most workloads benefit from unbound queues,
allowing the scheduler to place worker threads where they’re needed and
reducing noise when CPUs are isolated.
This continues the effort to refactor workqueue APIs, which began with
the introduction of new workqueues and a new alloc_workqueue flag in:
commit 128ea9f6ccfb ("workqueue: Add system_percpu_wq and system_dfl_wq")
commit 930c2ea566af ("workqueue: Add new WQ_PERCPU flag")
This change adds a new WQ_PERCPU flag to explicitly request
alloc_workqueue() to be per-cpu when WQ_UNBOUND has not been specified.
With the introduction of the WQ_PERCPU flag (equivalent to !WQ_UNBOUND),
any alloc_workqueue() caller that doesn’t explicitly specify WQ_UNBOUND
must now use WQ_PERCPU.
Once migration is complete, WQ_UNBOUND can be removed and unbound will
become the implicit default.
Suggested-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Marco Crivellari <marco.crivellari@suse.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20251106162430.328701-1-marco.crivellari@suse.com
|
|
am33xx.dtsi has the same clock setup as am35xx.dtsi, setting
ti,no-reset-on-init and ti,no-idle on timer1_target and timer2_target,
so AM33 needs the same workaround as AM35 to avoid ti-sysc probe
failing on certain target modules.
Signed-off-by: Matthias Schiffer <matthias.schiffer@tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Link: https://lore.kernel.org/r/20250825131114.2206804-1-alexander.stein@ew.tq-group.com
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
|
|
pm_runtime_put_autosuspend(), pm_runtime_put_sync_autosuspend(),
pm_runtime_autosuspend() and pm_request_autosuspend() now include a call
to pm_runtime_mark_last_busy(). Remove the now-reduntant explicit call to
pm_runtime_mark_last_busy().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251027133359.392984-1-sakari.ailus@linux.intel.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
|
|
This old alias for in_hardirq() has been marked as deprecated since
2020; remove the stragglers.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://patch.msgid.link/20251024180654.1691095-1-willy@infradead.org
|
|
Add SDX72 based modem Telit FE990B40, reusing FN920C04 configuration.
01:00.0 Unassigned class [ff00]: Qualcomm Device 0309
Subsystem: Device 1c5d:2025
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20251015102059.1781001-1-dnlplm@gmail.com
|
|
Because driver core can properly handle constant struct bus_type, move the
mhi_ep_bus_type to be a constant structure as well, placing it into
read-only memory which can not be modified at runtime.
Signed-off-by: Adrian Barnaś <abarnas@google.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Link: https://patch.msgid.link/20250919074408.868220-1-abarnas@google.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc/IIO/Binder updates from Greg KH:
"Here is the big set of char/misc/iio and other driver subsystem
changes for 6.18-rc1.
Loads of different stuff in here, it was a busy development cycle in
lots of different subsystems, with over 27k new lines added to the
tree.
Included in here are:
- IIO updates including new drivers, reworking of existing apis, and
other goodness in the sensor subsystems
- MEI driver updates and additions
- NVMEM driver updates
- slimbus removal for an unused driver and some other minor updates
- coresight driver updates and additions
- MHI driver updates
- comedi driver updates and fixes
- extcon driver updates
- interconnect driver additions
- eeprom driver updates and fixes
- minor UIO driver updates
- tiny W1 driver updates
But the majority of new code is in the rust bindings and additions,
which includes:
- misc driver rust binding updates for read/write support, we can now
write "normal" misc drivers in rust fully, and the sample driver
shows how this can be done.
- Initial framework for USB driver rust bindings, which are disabled
for now in the build, due to limited support, but coming in through
this tree due to dependencies on other rust binding changes that
were in here. I'll be enabling these back on in the build in the
usb.git tree after -rc1 is out so that developers can continue to
work on these in linux-next over the next development cycle.
- Android Binder driver implemented in Rust.
This is the big one, and was driving a huge majority of the rust
binding work over the past years. Right now there are two binder
drivers in the kernel, selected only at build time as to which one
to use as binder wants to be included in the system at boot time.
The binder C maintainers all agreed on this, as eventually, they
want the C code to be removed from the tree, but it will take a few
releases to get there while both are maintained to ensure that the
rust implementation is fully stable and compliant with the existing
userspace apis.
All of these have been in linux-next for a while"
* tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (320 commits)
rust: usb: keep usb::Device private for now
rust: usb: don't retain device context for the interface parent
USB: disable rust bindings from the build for now
samples: rust: add a USB driver sample
rust: usb: add basic USB abstractions
coresight: Add label sysfs node support
dt-bindings: arm: Add label in the coresight components
coresight: tnoc: add new AMBA ID to support Trace Noc V2
coresight: Fix incorrect handling for return value of devm_kzalloc
coresight: tpda: fix the logic to setup the element size
coresight: trbe: Return NULL pointer for allocation failures
coresight: Refactor runtime PM
coresight: Make clock sequence consistent
coresight: Refactor driver data allocation
coresight: Consolidate clock enabling
coresight: Avoid enable programming clock duplicately
coresight: Appropriately disable trace bus clocks
coresight: Appropriately disable programming clocks
coresight: etm4x: Support atclk
coresight: catu: Support atclk
...
|
|
VFs in devices like QDU100 are capable of accessing host memory up to 40
bits, compared to 32 bits used by PFs and other non-SR-IOV capable MHI
devices.
To support this, configure `dma_mask` independently for PFs and VFs, by
introducing a new 'vf_dma_data_width' member in 'mhi_pci_dev_info' struct
and set it to 40 for QDU100.
Signed-off-by: Vivek Pernamitta <quic_vpernami@quicinc.com>
[mani: reworded subject and description]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20250912-uevent_vdev_next-20250911-v4-6-fa2f6ccd301b@quicinc.com
|
|
Allow mhi_sync_power_up to handle SYS_ERR during power-up, reboot,
or recovery. This is to avoid premature exit when MHI_PM_IN_ERROR_STATE is
observed during above mentioned system states.
To achieve this, treat SYS_ERR as a valid state and let its handler process
the error and queue the next transition to Mission Mode instead of aborting
early.
Signed-off-by: Vivek Pernamitta <quic_vpernami@quicinc.com>
[mani: reworded description]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20250912-uevent_vdev_next-20250911-v4-5-fa2f6ccd301b@quicinc.com
|
|
So, When the MHI driver is removed from the host side, it is essential to
ensure a clean and stable recovery of the device. This commit introduces
the following steps to achieve that:
1. Disable SR-IOV for any SR-IOV-enabled devices on the Physical Function.
2. Perform a SOC_RESET on the PF to fully reset the device.
Disabling SR-IOV ensures all Virtual Functions (VFs) are properly shutdown,
preventing issues during the reset process. The SOC_RESET guarantees that
the PF is restored to a known good state.
If soc_reset is not performed device at driver remove, device will be
stuck in mission mode state and subsequent driver insert/power_up will not
proceed further.
Signed-off-by: Vivek Pernamitta <quic_vpernami@quicinc.com>
[mani: reworded subject]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20250912-uevent_vdev_next-20250911-v4-4-fa2f6ccd301b@quicinc.com
|
|
pci_sriov_configure_simple() will enable or disable SR-IOV for devices
that don't require any specific PF setup before enabling SR-IOV.
Signed-off-by: Vivek Pernamitta <quic_vpernami@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Link: https://patch.msgid.link/20250912-uevent_vdev_next-20250911-v4-3-fa2f6ccd301b@quicinc.com
|
|
In SR-IOV enabled devices, reading the VF DEVICE/VENDOR ID register
returns `FFFFh`, as specified in section 3.4.1.1 of the PCIe SR-IOV spec.
To accurately determine device activity, read the PCIe VENDOR_ID of
the Physical Function (PF) instead.
Health check monitoring for Virtual Functions (VFs) has been disabled,
since VFs are not physical functions and lack direct hardware control.
This change prevents unnecessary CPU cycles from being consumed by VF
health checks, which are both unintended and non-functional.
Signed-off-by: Vivek Pernamitta <quic_vpernami@quicinc.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Link: https://patch.msgid.link/20250912-uevent_vdev_next-20250911-v4-2-fa2f6ccd301b@quicinc.com
|
|
Implement support for separate controller configurations for both
Virtual Functions (VF) and Physical Functions (PF).
This enhancement allows for more flexible and efficient management of
resources. The PF takes on a supervisory role and will have bootup
information such as SAHARA, DIAG, and NDB (for file system sync data,
etc.). VFs can handle resources associated with the main data movement
of the Function are available to the SI (system image) as per PCIe SRIOV
spec (rev 0.9 1.Architectural overview)
Signed-off-by: Vivek Pernamitta <quic_vpernami@quicinc.com>
Reviewed-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20250912-uevent_vdev_next-20250911-v4-1-fa2f6ccd301b@quicinc.com
|
|
The mhi_ep_read_channel function incorrectly assumes the End of Transfer
(EOT) bit is present for each packet in a chained transactions, causing
it to advance mhi_chan->rd_offset beyond wr_offset during host-to-device
transfers when EOT has not yet arrived. This leads to access of unmapped
host memory, causing IOMMU faults and processing of stale TREs.
Modify the loop condition to ensure mhi_queue is not empty, allowing the
function to process only valid TREs up to the current write pointer to
prevent premature reads and ensure safe traversal of chained TREs.
Due to this change, buf_left needs to be removed from the while loop
condition to avoid exiting prematurely before reading the ring completely,
and also remove write_offset since it will always be zero because the new
cache buffer is allocated every time.
Fixes: 5301258899773 ("bus: mhi: ep: Add support for reading from the host")
Co-developed-by: Akhil Vinod <akhil.vinod@oss.qualcomm.com>
Signed-off-by: Akhil Vinod <akhil.vinod@oss.qualcomm.com>
Signed-off-by: Sumit Kumar <sumit.kumar@oss.qualcomm.com>
[mani: reworded description slightly]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250910-final_chained-v3-1-ec77c9d88ace@oss.qualcomm.com
|
|
Notify the MHI device's Execution Environment (EE) state via uevent,
enabling applications to receive real-time updates and take appropriate
actions based on the current state of MHI.
Signed-off-by: Vivek Pernamitta <quic_vpernami@quicinc.com>
[mani: Reworded subject, removed error print, fixed indentation]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20250912-b4-uevent_vdev_next-20250911-v2-1-89440407bf7e@quicinc.com
|
|
In mhi_init_irq_setup, the device pointer used for dev_err() was not
initialized. Use the pointer from mhi_cntrl instead.
Fixes: b0fc0167f254 ("bus: mhi: core: Allow shared IRQ for event rings")
Fixes: 3000f85b8f47 ("bus: mhi: core: Add support for basic PM operations")
Signed-off-by: Adam Xue <zxue@semtech.com>
[mani: reworded subject/description and CCed stable]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Reviewed-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250905174118.38512-1-zxue@semtech.com
|
|
Since there are too many variants available for Foxconn T99W696 modem, and
they all share the same configuration, use PCI_ANY_ID as the subsystem
device ID to match each possible SKUs and support all of them.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
[mani: reworded subject/description and dropped the fixes tag]
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@oss.qualcomm.com>
Link: https://patch.msgid.link/20250819020013.122162-1-slark_xiao@163.com
|
|
functions
Use sysfs_emit() instead of snprintf()/sprintf() when writing
to sysfs buffers, as recommended by the kernel documentation.
Signed-off-by: Chelsy Ratnawat <chelsyratnawat2001@gmail.com>
Acked-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/20250822124339.1739290-1-chelsyratnawat2001@gmail.com
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
platform_get_resource() returns NULL in case of failure, so check its
return value and propagate the error in order to prevent NULL pointer
dereference.
Fixes: 6305166c8771 ("bus: fsl-mc: Add ACPI support for fsl-mc")
Cc: stable@vger.kernel.org
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Acked-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Link: https://lore.kernel.org/r/aKwuK6TRr5XNYQ8u@pc
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Changes are all over the place, but very little sticks out as
noteworthy.
There is a new misc driver for the Raspberry Pi 5's RP1 multifunction
I/O chip, along with hooking it up to the pinctrl and clk frameworks.
The reset controller and memory subsystems have mainly small updates,
but there are two new reset drivers for the K230 and VC1800B SoCs, and
new memory driver support for Tegra264.
The ARM SMCCC and SCMI firmware drivers gain a few more features that
should help them be supported across more environments. Similarly, the
SoC specific firmware on Tegra and Qualcomm get minor enhancements and
chip support.
In the drivers/soc/ directory, the ASPEED LPC snoop driver gets an
overhaul for code robustness, the Tegra and Qualcomm and NXP drivers
grow to support more chips, while the Hisilicon, Mediatek and Renesas
drivers see mostly janitorial fixes"
* tag 'soc-drivers-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (100 commits)
bus: del unnecessary init var
soc: fsl: qe: convert set_multiple() to returning an integer
pinctrl: rp1: use new GPIO line value setter callbacks
soc: hisilicon: kunpeng_hccs: Fix incorrect log information
dt-bindings: soc: qcom: qcom,pmic-glink: document Milos compatible
dt-bindings: soc: qcom,aoss-qmp: document the Milos Always-On Subsystem side channel
dt-bindings: firmware: qcom,scm: document Milos SCM Firmware Interface
soc: qcom: socinfo: Add support to retrieve APPSBL build details
soc: qcom: pmic_glink: fix OF node leak
soc: qcom: spmi-pmic: add more PMIC SUBTYPE IDs
soc: qcom: socinfo: Add PM7550 & PMIV0108 PMICs
soc: qcom: socinfo: Add SoC IDs for SM7635 family
dt-bindings: arm: qcom,ids: Add SoC IDs for SM7635 family
firmware: qcom: scm: request the waitqueue irq *after* initializing SCM
firmware: qcom: scm: initialize tzmem before marking SCM as available
firmware: qcom: scm: take struct device as argument in SHM bridge enable
firmware: qcom: scm: remove unused arguments from SHM bridge routines
soc: qcom: rpmh-rsc: Add RSC version 4 support
memory: tegra: Add Tegra264 MC and EMC support
firmware: tegra: bpmp: Fix build failure for tegra264-only config
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / IIO / other driver updates from Greg KH:
"Here is the big set of char/misc/iio and other smaller driver
subsystems for 6.17-rc1. It's a big set this time around, with the
huge majority being in the iio subsystem with new drivers and dts
files being added there.
Highlights include:
- IIO driver updates, additions, and changes making more code const
and cleaning up some init logic
- bus_type constant conversion changes
- misc device test functions added
- rust miscdevice minor fixup
- unused function removals for some drivers
- mei driver updates
- mhi driver updates
- interconnect driver updates
- Android binder updates and test infrastructure added
- small cdx driver updates
- small comedi fixes
- small nvmem driver updates
- small pps driver updates
- some acrn virt driver fixes for printk messages
- other small driver updates
All of these have been in linux-next with no reported issues"
* tag 'char-misc-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits)
binder: Use seq_buf in binder_alloc kunit tests
binder: Add copyright notice to new kunit files
misc: ti_fpc202: Switch to of_fwnode_handle()
bus: moxtet: Use dev_fwnode()
pc104: move PC104 option to drivers/Kconfig
drivers: virt: acrn: Don't use %pK through printk
comedi: fix race between polling and detaching
interconnect: qcom: Add Milos interconnect provider driver
dt-bindings: interconnect: document the RPMh Network-On-Chip Interconnect in Qualcomm Milos SoC
mei: more prints with client prefix
mei: bus: use cldev in prints
bus: mhi: host: pci_generic: Add Telit FN990B40 modem support
bus: mhi: host: Detect events pointing to unexpected TREs
bus: mhi: host: pci_generic: Add Foxconn T99W696 modem
bus: mhi: host: Use str_true_false() helper
bus: mhi: host: pci_generic: Add support for EM929x and set MRU to 32768 for better performance.
bus: mhi: host: Fix endianness of BHI vector table
bus: mhi: host: pci_generic: Disable runtime PM for QDU100
bus: mhi: host: pci_generic: Fix the modem name of Foxconn T99W640
dt-bindings: interconnect: qcom,msm8998-bwmon: Allow 'nonposted-mmio'
...
|
|
irq_domain_create_simple() takes fwnode as the first argument. It can be
extracted from the struct device using dev_fwnode() helper instead of
using of_node with of_fwnode_handle().
So use the dev_fwnode() helper.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Reviewed-by: Marek Behún <kabel@kernel.org>
Link: https://lore.kernel.org/r/20250723055325.1800024-1-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/drivers
i.MX drivers changes for 6.17:
- A couple of MAINTAINERS updates
- A new bus driver for i.MX AIPSTZ bridge and a follow-up fix from
Laurentiu Mihalcea
* tag 'imx-drivers-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
bus: imx-aipstz: allow creating pdevs for child buses
MAINTAINERS: Update i.MX entry
bus: add driver for IMX AIPSTZ bridge
MAINTAINERS: add NXP S32G RTC driver
Link: https://lore.kernel.org/r/20250713055441.221235-1-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The compiler generates initialization instructions,
which consume additional CPU cycles. the
sysc_clockdomain_init should assign a value
to 'error' before it is read.so the var don't need init
to 0.
Signed-off-by: Li Jun <lijun01@kylinos.cn>
Link: https://lore.kernel.org/r/20250604081712.119523-1-lijun01@kylinos.cn
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add SDX72 based modem Telit FN990B40, reusing FN920C04 configuration.
01:00.0 Unassigned class [ff00]: Qualcomm Device 0309
Subsystem: Device 1c5d:201a
Signed-off-by: Daniele Palmas <dnlplm@gmail.com>
[mani: added sdx72 in the comment to identify the chipset]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250716091836.999364-1-dnlplm@gmail.com
|
|
When a remote device sends a completion event to the host, it contains a
pointer to the consumed TRE. The host uses this pointer to process all of
the TREs between it and the host's local copy of the ring's read pointer.
This works when processing completion for chained transactions, but can
lead to nasty results if the device sends an event for a single-element
transaction with a read pointer that is multiple elements ahead of the
host's read pointer.
For instance, if the host accesses an event ring while the device is
updating it, the pointer inside of the event might still point to an old
TRE. If the host uses the channel's xfer_cb() to directly free the buffer
pointed to by the TRE, the buffer will be double-freed.
This behavior was observed on an ep that used upstream EP stack without
'commit 6f18d174b73d ("bus: mhi: ep: Update read pointer only after buffer
is written")'. Where the device updated the events ring pointer before
updating the event contents, so it left a window where the host was able to
access the stale data the event pointed to, before the device had the
chance to update them. The usual pattern was that the host received an
event pointing to a TRE that is not immediately after the last processed
one, so it got treated as if it was a chained transaction, processing all
of the TREs in between the two read pointers.
This commit aims to harden the host by ensuring transactions where the
event points to a TRE that isn't local_rp + 1 are chained.
Fixes: 1d3173a3bae7 ("bus: mhi: core: Add support for processing events from client device")
Signed-off-by: Youssef Samir <quic_yabdulra@quicinc.com>
[mani: added stable tag and reworded commit message]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250714163039.3438985-1-quic_yabdulra@quicinc.com
|
|
T99W696 modem is based on Qualcomm SDX61 chipset, which is an economic
version compared to the baseline SDX62/SDX65 chipsets. Add support for it
by introducing a new 'mhi_channel_config'. Since this modem supports the
NMEA channel, a new config is needed.
Signed-off-by: Slark Xiao <slark_xiao@163.com>
[mani: reworded commit message]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250528092232.16111-1-slark_xiao@163.com
|
|
Remove hard-coded strings by using the str_true_false() helper.
Signed-off-by: Yumeng Fang <fang.yumeng@zte.com.cn>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250623202814633ukJqUDLU7BRlLLhvWkbD7@zte.com.cn
|
|
better performance.
Add MHI controller config for EM929x. It uses the same configuration
as EM919x. Also set the MRU to 32768 to improve downlink throughput.
02:00.0 Unassigned class [ff00]: Qualcomm Technologies, Inc Device 0308
Subsystem: Device 18d7:0301
Signed-off-by: Adam Xue <zxue@semtech.com>
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250528175943.12739-1-zxue@semtech.com
|
|
On big endian platform like PowerPC, the MHI bus (which is little endian)
does not start properly. The following example shows the error messages by
using QCN9274 WLAN device with ath12k driver:
ath12k_pci 0001:01:00.0: BAR 0: assigned [mem 0xc00000000-0xc001fffff 64bit]
ath12k_pci 0001:01:00.0: MSI vectors: 1
ath12k_pci 0001:01:00.0: Hardware name: qcn9274 hw2.0
ath12k_pci 0001:01:00.0: failed to set mhi state: POWER_ON(2)
ath12k_pci 0001:01:00.0: failed to start mhi: -110
ath12k_pci 0001:01:00.0: failed to power up :-110
ath12k_pci 0001:01:00.0: failed to create soc core: -110
ath12k_pci 0001:01:00.0: failed to init core: -110
ath12k_pci: probe of 0001:01:00.0 failed with error -110
The issue seems to be with the incorrect DMA address/size used for
transferring the firmware image over BHI. So fix it by converting the DMA
address and size of the BHI vector table to little endian format before
sending them to the device.
Fixes: 6cd330ae76ff ("bus: mhi: core: Add support for ringing channel/event ring doorbells")
Signed-off-by: Alexander Wilhelm <alexander.wilhelm@westermo.com>
[mani: added stable tag and reworded commit message]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Jeff Hugo <jeff.hugo@oss.qualcomm.com>
Reviewed-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Cc: stable@vger.kernel.org
Link: https://patch.msgid.link/20250519145837.958153-1-alexander.wilhelm@westermo.com
|
|
The QDU100 device does not support the MHI M3 state, necessitating the
disabling of runtime PM for this device. It is essential to disable
runtime PM if the device does not support M3 state.
Signed-off-by: Vivek Pernamitta <quic_vpernami@quicinc.com>
[mani: Fixed the kdoc comment for no_m3]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Reviewed-by: Krishna Chaitanya Chundru <krishna.chundru@oss.qualcomm.com>
Link: https://patch.msgid.link/20250425-vdev_next-20250411_pm_disable-v4-1-d4870a73ebf9@quicinc.com
|
|
T99W640 was mistakenly mentioned as T99W515. T99W515 is a LGA device, not
a M.2 modem device. So correct it's name to avoid name mismatch issue.
Fixes: bf30a75e6e00 ("bus: mhi: host: Add support for Foxconn SDX72 modems")
Signed-off-by: Slark Xiao <slark_xiao@163.com>
[mani: commit message fixup]
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250606095019.383992-1-slark_xiao@163.com
|
|
The fsl_mc_get_endpoint() function may call fsl_mc_device_lookup()
twice, which would increment the device's reference count twice if
both lookups find a device. This could lead to a reference count leak.
Found by code review.
Cc: stable@vger.kernel.org
Fixes: 1ac210d128ef ("bus: fsl-mc: add the fsl_mc_get_endpoint function")
Signed-off-by: Ma Ke <make24@iscas.ac.cn>
Tested-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Fixes: 8567494cebe5 ("bus: fsl-mc: rescan devices if endpoint not found")
Link: https://patch.msgid.link/20250717022309.3339976-1-make24@iscas.ac.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
devm_of_platform_populate() passes a NULL as the bus OF match table
to the underlying of_platform_populate(), meaning child bus devices
of the AIPSTZ bridge will not have its children devices created. Since
some SoCs (e.g. i.MX8MP) use this particular setup (e.g. SPBA bus, which
is a child of AIPSTZ5 and has multiple child nodes), the driver needs to
support it.
Therefore, replace devm_of_platform_populate() with of_platform_populate()
and pass a reference to the bus OF match table to it. For now, the only
possible child buses are simple buses.
Since the usage of devres is dropped, the complementary operation of
of_platform_populate() needs to be called during the driver's removal.
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Fixes: 796cba2dd4d9 ("bus: add driver for IMX AIPSTZ bridge")
Reported-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Closes: https://lore.kernel.org/lkml/5029548.31r3eYUQgx@steina-w/#t
Tested-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
The secure AHB to IP Slave (AIPSTZ) bus bridge provides access control
configurations meant to restrict access to certain peripherals.
Some of the configurations include:
1) Marking masters as trusted for R/W. Based on this
(and the configuration of the accessed peripheral), the bridge
may choose to abort the R/W transactions issued by certain
masters.
2) Allowing/disallowing write accesses to peripherals.
Add driver for this IP. Since there's currently no framework for
access controllers (and since there's currently no need for having
flexibility w.r.t the configurations) all this driver does is it
applies a relaxed, "default" configuration, in which all masters
are trusted for R/W.
Note that some instances of this IP (e.g: AIPSTZ5 on i.MX8MP) may be tied
to a power domain and may lose their configuration when the domain is
powered off. This is why the configuration has to be restored when the
domain is powered on.
Co-developed-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Daniel Baluta <daniel.baluta@nxp.com>
Signed-off-by: Laurentiu Mihalcea <laurentiu.mihalcea@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
These functions were not used outside of the file defining them. So make
them static as they should be.
Signed-off-by: Manivannan Sadhasivam <mani@kernel.org>
Link: https://patch.msgid.link/20250617064906.14079-1-mani@kernel.org
|
|
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char / misc / iio driver updates from Greg KH:
"Here is the big char/misc/iio and other small driver subsystem pull
request for 6.16-rc1.
Overall, a lot of individual changes, but nothing major, just the
normal constant forward progress of new device support and cleanups to
existing subsystems. Highlights in here are:
- Large IIO driver updates and additions and device tree changes
- Android binder bugfixes and logfile fixes
- mhi driver updates
- comedi driver updates
- counter driver updates and additions
- coresight driver updates and additions
- echo driver removal as there are no in-kernel users of it
- nvmem driver updates
- spmi driver updates
- new amd-sbi driver "subsystem" and drivers added
- rust miscdriver binding documentation fix
- other small driver fixes and updates (uio, w1, acrn, hpet,
xillybus, cardreader drivers, fastrpc and others)
All of these have been in linux-next for quite a while with no
reported problems"
* tag 'char-misc-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (390 commits)
binder: fix yet another UAF in binder_devices
counter: microchip-tcb-capture: Add watch validation support
dt-bindings: iio: adc: Add ROHM BD79100G
iio: adc: add support for Nuvoton NCT7201
dt-bindings: iio: adc: add NCT7201 ADCs
iio: chemical: Add driver for SEN0322
dt-bindings: trivial-devices: Document SEN0322
iio: adc: ad7768-1: reorganize driver headers
iio: bmp280: zero-init buffer
iio: ssp_sensors: optimalize -> optimize
HID: sensor-hub: Fix typo and improve documentation
iio: admv1013: replace redundant ternary operator with just len
iio: chemical: mhz19b: Fix error code in probe()
iio: adc: at91-sama5d2: use IIO_DECLARE_BUFFER_WITH_TS
iio: accel: sca3300: use IIO_DECLARE_BUFFER_WITH_TS
iio: adc: ad7380: use IIO_DECLARE_DMA_BUFFER_WITH_TS
iio: adc: ad4695: rename AD4695_MAX_VIN_CHANNELS
iio: adc: ad4695: use IIO_DECLARE_DMA_BUFFER_WITH_TS
iio: introduce IIO_DECLARE_BUFFER_WITH_TS macros
iio: make IIO_DMA_MINALIGN minimum of 8 bytes
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC updates from Arnd Bergmann:
"The main update in size is the removal of the TI DaVinci DA830 SoC
support. DA830 is similar to DA850, which remain supported, but only
the reference board was ever supported, and we removed that one 3
years ago as it had never been converted to devicetree.
There are some other cleanups for OMAP4 and a few boards using old
GPIO interfaces"
* tag 'soc-arm-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: s3c: stop including gpio.h
ARM: dts: davinci: da850-evm: Increase fifo threshold
ARM: OMAP2+: Fix l4ls clk domain handling in STANDBY
ARM: broadcom: MAINTAINERS: Cover bcm2712 files
bus: ti-sysc: PRUSS OCP configuration
ARM: davinci: remove support for da830
ARM: omap: pmic-cpcap: do not mess around without CPCAP or OMAP4
ARM: omap2plus_defconfig: enable I2C devices of GTA04
ARM: s3c/gpio: use new line value setter callbacks
ARM: scoop/gpio: use new line value setter callbacks
ARM: sa1100/gpio: use new line value setter callbacks
ARM: orion/gpio: use new line value setter callbacks
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"Updates are across the usual driver subsystems with SoC specific
drivers:
- added soc specicific drivers for sophgo cv1800 and sg2044, qualcomm
sm8750, and amlogic c3 and s4 chips.
- cache controller updates for sifive chips, plus binding changes for
other cache descriptions.
- memory controller drivers for mediatek mt6893, stm32 and cleanups
for a few more drivers
- reset controller drivers for T-Head TH1502, Sophgo sg2044 and
Renesas RZ/V2H(P)
- SCMI firmware updates to better deal with buggy firmware, plus
better support for Qualcomm X1E and NXP i.MX specific interfaces
- a new platform driver for the crypto firmware on Cznic Turris
Omnia/MOX
- cleanups for the TEE firmware subsystem and amdtee driver
- minor updates and fixes for freescale/nxp, qualcomm, google,
aspeed, wondermedia, ti, nxp, renesas, hisilicon, mediatek,
broadcom and samsung SoCs"
* tag 'soc-drivers-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (133 commits)
soc: aspeed: Add NULL check in aspeed_lpc_enable_snoop()
soc: aspeed: lpc: Fix impossible judgment condition
ARM: aspeed: Don't select SRAM
docs: firmware: qcom_scm: Fix kernel-doc warning
soc: fsl: qe: Consolidate chained IRQ handler install/remove
firmware: qcom: scm: Allow QSEECOM for HP EliteBook Ultra G1q
dt-bindings: mfd: qcom,tcsr: Add compatible for ipq5018
dt-bindings: cache: add QiLai compatible to ax45mp
memory: stm32_omm: Fix error handling in stm32_omm_disable_child()
dt-bindings: cache: Convert marvell,tauros2-cache to DT schema
dt-bindings: cache: Convert marvell,{feroceon,kirkwood}-cache to DT schema
soc: samsung: exynos-pmu: enable CPU hotplug support for gs101
MAINTAINERS: Add google,gs101-pmu-intr-gen.yaml binding file
dt-bindings: soc: samsung: exynos-pmu: gs101: add google,pmu-intr-gen phandle
dt-bindings: soc: google: Add gs101-pmu-intr-gen binding documentation
bus: fsl-mc: Use strscpy() instead of strscpy_pad()
soc: fsl: qbman: Remove const from portal->cgrs allocation type
bus: fsl_mc: Fix driver_managed_dma check
bus: fsl-mc: increase MC_CMD_COMPLETION_TIMEOUT_MS value
bus: fsl-mc: drop useless cleanup
...
|
|
FSL SOC Changes for 6.16:
- Various fixes and cleanups from Ioana on fsl-mc bus driver
- Other misc fixes on fsl-mc bus driver
- A build fix on DPAA2 driver
- Some preparation work from Kees on qbman driver
- Some cleanup on FSL qe interrupt driver init
* tag 'soc_fsl-6.16-1' of https://github.com/chleroy/linux:
soc: fsl: qe: Consolidate chained IRQ handler install/remove
bus: fsl-mc: Use strscpy() instead of strscpy_pad()
soc: fsl: qbman: Remove const from portal->cgrs allocation type
bus: fsl_mc: Fix driver_managed_dma check
bus: fsl-mc: increase MC_CMD_COMPLETION_TIMEOUT_MS value
bus: fsl-mc: drop useless cleanup
bus: fsl-mc: add the dprc_get_mem() command to the whitelist
bus: fsl-mc: fix GET/SET_TAILDROP command ids
bus: fsl-mc: do not add a device-link for the UAPI used DPMCP device
bus: fsl-mc: fix double-free on mc_dev
soc: fsl: Do not enable DPAA2_CONSOLE by default during compile testing
Link: https://lore.kernel.org/r/9e5b3e8e-3280-4ff9-915b-9a8b934bac22@csgroup.eu
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi into char-misc-next
Manivannan writes:
MHI Host
========
- Fix conflict between MHI power up and SYSERR state transitions by issuing MHI
reset only if the device is in SYSERR state while in SBL/PBL EEs. The device
won't respond to reset if it is not in SYSERR state in SBL/PBL EEs.
- Remove redundant call to pci_assign_resource() since PCI core calls this API
internally.
- Add Telit FN920C04 modem which is based on Qcom SDX35 chipset.
* tag 'mhi-for-v6.16' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/mani/mhi:
bus: mhi: host: pci_generic: Add Telit FN920C04 modem support
bus: mhi: host: pci_generic: Remove redundant assign resource usage
bus: mhi: host: Fix conflict between power_up and SYSERR
|
