| Age | Commit message (Collapse) | Author |
|---|
|
While the user manual states that the PLL's rate should be between 180
MHz and 3 GHz in the register defninition section, it also says the
actual operating frequency is 22.5792*4 MHz in the PLL features table.
22.5792*4 MHz is one of the actual clock rates that we want and is
is available in the SDM table. Lower the minimum clock rate to 90 MHz
so that both rates in the SDM table can be used.
Fixes: 7cae1e2b5544 ("clk: sunxi-ng: Add support for the A523/T527 CCU PLLs")
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251020171059.2786070-7-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
|
|
The "bus-r-dma" clock in the A523's PRCM clock controller is also
referred to as "DMA_CLKEN_SW" or "DMA ADB400 gating". It is unclear how
this ties into the DMA controller MBUS clock gate; however if the clock
is not enabled, the DMA controller in the MCU block will fail to access
DRAM, even failing to retrieve the DMA descriptors.
Mark this clock as critical. This sort of mirrors what is done for the
main DMA controller's MBUS clock, which has a separate toggle that is
currently left out of the main clock controller driver.
Fixes: 8cea339cfb81 ("clk: sunxi-ng: add support for the A523/T527 PRCM CCU")
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20251020171059.2786070-6-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
|
|
bus-r-cpucfg clock is important for peripheral which takes care of
powering CPU cores on and off. Since this operation is done by firmware
(TF-A), mark it as critical. That way Linux won't interfere with that
clock.
Fixes: 8cea339cfb81 ("clk: sunxi-ng: add support for the A523/T527 PRCM CCU")
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20251020152704.4804-1-jernej.skrabec@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"There's a bunch of patches here across drivers/clk/ to migrate drivers
to use struct clk_ops::determine_rate() instead of the round_rate()
one so that we can remove the round_rate clk_op entirely. Brian has
taken up that task which nobody else has wanted to do for close to a
decade. Thanks Brian!
This is all prerequisite work to get to the real task of improving the
clk rate setting process. Once we have determine_rate() used
everywhere, we'll be able to do things like chain the rate request
structs in linked lists to order the rate setting operations or add
more parameters without having to change every clk driver in
existence. It's also nice to not have multiple ways to do something
which just causes confusion for clk driver authors. Overall I'm glad
this is getting done.
Beyond this change we also have a tweak to the clk_lookup() function
in the core framework to use hashing on the clk name instead of a clk
tree walk with string comparisons. We _still_ rely on the clk name to
be unique, because historically we've used globally unique strings to
describe the clk tree topology. This tree walk becomes increasingly
slow as more clks are added to the system. Searching from the roots
for a duplicate is simple but pretty dumb and it wastes boot time so
we're using a hash table as an improvement. Ideally we wouldn't rely
on the strings to be unique at all, relegating them to simply debug
information, but that is future work that will likely require some
sort of Kconfig knob indicating strings aren't used for topology
description.
Outside of the core framework changes we have the usual new SoC
support and fixes to clk drivers for things that were discovered once
the clks were used by consumer drivers. Nothing in particular is
jumping out at me in the "misc" pile, except maybe the Amlogic driver
that has gone through a refactoring. That series got a fix from
testing in -next though so it seems likely that things have been
getting good test coverage for a couple weeks already"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (299 commits)
clk: microchip: core: remove duplicate roclk_determine_rate()
reset: aspeed: register AST2700 reset auxiliary bus device
dt-bindings: clock: ast2700: modify soc0/1 clock define
clk: tegra: do not overallocate memory for bpmp clocks
clk: ep93xx: Use int type to store negative error codes
clk: nxp: Fix pll0 rate check condition in LPC18xx CGU driver
clk: loongson2: Add clock definitions for Loongson-2K0300 SoC
clk: loongson2: Avoid hardcoding firmware name of the reference clock
clk: loongson2: Allow zero divisors for dividers
clk: loongson2: Support scale clocks with an alternative mode
clk: loongson2: Allow specifying clock flags for gate clock
dt-bindings: clock: loongson2: Add Loongson-2K0300 compatible
clk: clocking-wizard: Fix output clock register offset for Versal platforms
clk: xilinx: Optimize divisor search in clk_wzrd_get_divisors_ver()
clk: mmp: pxa1908: Instantiate power driver through auxiliary bus
clk: s2mps11: add support for S2MPG10 PMIC clock
dt-bindings: clock: samsung,s2mps11: add s2mpg10
dt-bindings: stm32: cosmetic fixes for STM32MP25 clock and reset bindings
clk: stm32: introduce clocks for STM32MP21 platform
dt-bindings: stm32: add STM32MP21 clocks and reset bindings
...
|
|
The A523/T527 SoCs have a new MCU PRCM, which has more clocks and reset
controls for the RISC-V MCU and other peripherals. There is a second
audio PLL, but no bus clock dividers. The BSP driver uses the 24MHz main
oscillator as the parent for all the bus clocks. But the diagram
suggests busses from the other PRCM are used in this block as well.
Add a driver to support this part. Unlike the BSP driver, the SoC's main
MBUS clock is chosen as the parent for the MCU MBUS clock, and the
latter then serves as the parent of the MCU DMA controller's MBUS clock.
The bus gate clocks also use their respective bus clocks as parents
according to the system bus tree diagram. In cases where a block does
not appear in that diagram, an educated guess is made.
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250911174710.3149589-6-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Some clocks (for timers) on the A523 are mux-divider-gate types
with the divider being values of power-of-two.
Add a macro for these types of clocks so that we can use the divider
types instead of the M-P types without an M divider.
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250911174710.3149589-5-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The main clock controller on the A523/T527 has the NPU's module clock.
It was missing from the original submission, likely because that was
based on the A523 user manual; the A523 is marketed without the NPU.
Also, merge the private header back into the driver code itself. The
header only contains a macro containing the total number of clocks.
This has to be updated every time a missing clock gets added. Having
it in a separate file doesn't help the process. Instead just drop the
macro, and thus the header no longer has any reason to exist.
Also move the .num value to after the list of clks to make it obvious
that it should be updated when new clks are added.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250911174710.3149589-4-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The A523's RTC block is backward compatible with the R329's, but it also
has a calibration function for its internal oscillator, which would
allow it to provide a clock rate closer to the desired 32.768 KHz. This
is useful on the Radxa Cubie A5E, which does not have an external 32.768
KHz crystal.
Add new compatible-specific data for it.
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250909170947.2221611-1-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
When dual-divider clock support was introduced, the P divider offset was
left out of the .recalc_rate readback function. This causes the clock
rate to become bogus or even zero (possibly due to the P divider being
1, leading to a divide-by-zero).
Fix this by incorporating the P divider offset into the calculation.
Fixes: 45717804b75e ("clk: sunxi-ng: mp: introduce dual-divider clock")
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250830170901.1996227-4-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Resolve conflicts with i.MX95 changes 88768d6f8c13 ("clk:
imx95-blk-ctl: Rename lvds and displaymix csr blk") in clk-imx
and aacc875a448d ("clk: imx: Fix an out-of-bounds access in
dispmix_csr_clk_dev_data") in clk-fixes.
* clk-fixes:
clk: sunxi-ng: v3s: Fix TCON clock parents
clk: sunxi-ng: v3s: Fix CSI1 MCLK clock name
clk: sunxi-ng: v3s: Fix CSI SCLK clock name
dt-bindings: clock: mediatek: Add #reset-cells property for MT8188
clk: imx: Fix an out-of-bounds access in dispmix_csr_clk_dev_data
clk: scmi: Handle case where child clocks are initialized before their parents
clk: sunxi-ng: a523: Mark MBUS clock as critical
|
|
and 'clk-amlogic' into clk-next
* clk-renesas: (42 commits)
clk: renesas: r9a08g045: Add MSTOP for coupled clocks as well
clk: renesas: r9a09g047: Add clock and reset signals for the GBETH IPs
clk: renesas: r9a09g057: Add XSPI clock/reset
clk: renesas: r9a09g056: Add XSPI clock/reset
clk: renesas: rzv2h: Add fixed-factor module clocks with status reporting
clk: renesas: r9a09g057: Add support for xspi mux and divider
clk: renesas: r9a09g056: Add support for xspi mux and divider
clk: renesas: r9a09g077: Add RIIC module clocks
clk: renesas: r9a09g077: Add PLL2 and SDHI clock support
clk: renesas: rzv2h: Drop redundant base pointer from pll_clk
clk: renesas: r9a09g057: Add entries for the RSPIs
dt-bindings: clock: renesas,r9a09g077/87: Add SDHI_CLKHS clock ID
dt-bindings: clock: renesas,r9a09g056/57-cpg: Add XSPI core clock
clk: renesas: rzv2h: Add missing include file
clk: renesas: rzv2h: Use devm_kmemdup_array()
clk: renesas: Add CPG/MSSR support to RZ/N2H SoC
clk: renesas: r9a09g077: Add PCLKL core clock
dt-bindings: clock: renesas,cpg-mssr: Document RZ/N2H support
dt-bindings: soc: renesas: Document RZ/N2H (R9A09G087) SoC
dt-bindings: clock: renesas,r9a09g077: Add PCLKL core clock ID
...
* clk-samsung:
clk: samsung: exynosautov920: add block hsi2 clock support
dt-bindings: clock: exynosautov920: add hsi2 clock definitions
dt-bindings: clock: exynosautov920: sort clock definitions
clk: samsung: exynos850: fix a comment
clk: samsung: gs101: fix alternate mout_hsi0_usb20_ref parent clock
clk: samsung: gs101: fix CLK_DOUT_CMU_G3D_BUSD
* clk-spacemit:
clk: spacemit: ccu_pll: fix error return value in recalc_rate callback
reset: spacemit: add support for SpacemiT CCU resets
clk: spacemit: mark K1 pll1_d8 as critical
clk: spacemit: define three reset-only CCUs
clk: spacemit: set up reset auxiliary devices
soc: spacemit: create a header for clock/reset registers
dt-bindings: soc: spacemit: define spacemit,k1-ccu resets
* clk-allwinner:
clk: sunxi-ng: ccu_nm: convert from round_rate() to determine_rate()
clk: sunxi-ng: ccu_nkmp: convert from round_rate() to determine_rate()
clk: sunxi-ng: ccu_nk: convert from round_rate() to determine_rate()
clk: sunxi-ng: ccu_gate: convert from round_rate() to determine_rate()
clk: sunxi-ng: v3s: Assign the de and tcon clocks to the video pll
clk: sunxi-ng: v3s: Fix de clock definition
clk: sunxi-ng: sun55i-a523-r-ccu: Add missing PPU0 reset
dt-bindings: reset: sun55i-a523-r-ccu: Add missing PPU0 reset
* clk-amlogic:
clk: amlogic: s4: remove unused data
clk: amlogic: drop clk_regmap tables
clk: amlogic: get regmap with clk_regmap_init
clk: amlogic: remove unnecessary headers
clk: amlogic: axg-audio: use the auxiliary reset driver
|
|
Fix typos, mostly in comments except CLKGATE_SEPERATED_* (definition and
uses updated).
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20250723203819.2910289-1-helgaas@kernel.org
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
I manually fixed up one minor formatting issue that occurred after
applying the semantic patch:
req->rate = ccu_nm_find_best(&nm->common, req->best_parent_rate,
req->rate,
&_nm);
I manually changed it to:
req->rate = ccu_nm_find_best(&nm->common, req->best_parent_rate,
req->rate, &_nm);
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20250703-clk-cocci-drop-round-rate-v1-10-3a8da898367e@redhat.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20250703-clk-cocci-drop-round-rate-v1-9-3a8da898367e@redhat.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20250703-clk-cocci-drop-round-rate-v1-8-3a8da898367e@redhat.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The round_rate() clk ops is deprecated, so migrate this driver from
round_rate() to determine_rate() using the Coccinelle semantic patch
on the cover letter of this series.
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Link: https://patch.msgid.link/20250703-clk-cocci-drop-round-rate-v1-7-3a8da898367e@redhat.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
It appears (based on experimentation) that both the de and tcon clocks
need to have the same parent for the two units to work together.
Assign them both to the video pll by manually clearing the parent
selection bits (effectively setting index 0) and marking the clocks
with the CLK_SET_RATE_NO_REPARENT flag, which ensures that they will
never use a different parent.
The video pll is also a possible parent for the camera subsystem,
but it can use the dedicated isp pll if needed so there should be
no negative side-effect due to this change.
Note that ccu_mux_helper_set_parent cannot be used at this stage as
it requires the clock driver to be initialized and this configuration
is best done before the clock driver is available to consumers.
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Link: https://patch.msgid.link/20250704154008.3463257-2-paulk@sys-base.io
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The de clock is marked with CLK_SET_RATE_PARENT, which is really not
necessary (as confirmed from experimentation) and significantly
restricts flexibility for other clocks using the same parent.
In addition the source selection (parent) field is marked as using
2 bits, when it the documentation reports that it uses 3.
Fix both issues in the de clock definition.
Fixes: d0f11d14b0bc ("clk: sunxi-ng: add support for V3s CCU")
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Link: https://patch.msgid.link/20250704154008.3463257-1-paulk@sys-base.io
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The TCON clock can be parented to both the video PLL and the periph0 PLL.
Add the latter, which was missing from the list.
Fixes: d0f11d14b0bc ("clk: sunxi-ng: add support for V3s CCU")
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Link: https://patch.msgid.link/20250701201124.812882-5-paulk@sys-base.io
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The CSI1 MCLK clock is reported as "csi-mclk" while it is specific to
CSI1 as the name of the definition indicates. Fix it in the driver.
Fixes: d0f11d14b0bc ("clk: sunxi-ng: add support for V3s CCU")
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-By: Icenowy Zheng <uwu@icenowy.me>
Link: https://patch.msgid.link/20250701201124.812882-4-paulk@sys-base.io
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The CSI SCLK clock is incorrectly called CSI1 SCLK while it is used for
both the CSI0 and CSI1 interfaces and is called CSI SCLK all around the
documentation.
Fix the name in the driver, header and device-tree.
Fixes: d0f11d14b0bc ("clk: sunxi-ng: add support for V3s CCU")
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-By: Icenowy Zheng <uwu@icenowy.me>
Link: https://patch.msgid.link/20250701201124.812882-3-paulk@sys-base.io
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
There is a PPU0 reset control bit in the same register as the PPU1
reset control. This missing reset control is for the PCK-600 unit
in the SoC. Manual tests show that the reset control indeed exists,
and if not configured, the system will hang when the PCK-600 registers
are accessed.
Add a reset entry for it at the end of the existing ones.
Fixes: 8cea339cfb81 ("clk: sunxi-ng: add support for the A523/T527 PRCM CCU")
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Link: https://patch.msgid.link/20250619171025.3359384-3-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The MBUS serves as the main data bus for various DMA masters in the
system. If its clock is not enabled, the DMA operations will stall,
leading to the peripherals stalling or timing out. This has been
observed as USB or MMC hosts timing out waiting for transactions
when the clock is automatically disabled by the CCF due to it not
being used.
Mark the clock as critical so that it never gets disabled.
Fixes: 74b0443a0d0a ("clk: sunxi-ng: a523: add system mod clocks")
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250607135029.2085140-1-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This has been a semi-quiet cycle. The core framework remains unchanged
this time around.
In terms of shiny new code though, we have support for the SpacemiT K1
SoC, Sophgo SG2044, and T-HEAD TH1520 VO clk drivers joining the usual
silicon players like Qualcomm, Samsung, Allwinner, and Renesas.
Surprisingly, the Qualcomm pile was smaller than usual but that is
likely because they put one SoC support inside a driver for a
different SoC that is very similar.
Other than all those new clk drivers there are the usual clk data
updates to fix parents, frequency tables, and add missing clks along
with some Kconfig changes to make compile testing simpler and even
more DT binding conversions to boot.
The exciting part is still the new SoC support like SpacemiT and
Sophgo support though, which really dominate the diffstat because they
introduce a whole new silicon vendor clk driver.
New Drivers:
- Camera clock controller driver for Qualcomm QCS8300
- DE (display engine) 3.3 clocks on Allwinner H616
- Samsung ExynosAutov920 CPU cluster CL0, CL1 and CL2 clock controllers
- Video Output (VO) subsystem clk controller in the T-HEAD TH1520 SoC
- Clock driver for Sophgo SG2044
- Clock driver for SpacemiT K1 SoC
- Renesas RZ/V2N (R9A09G056) SoC clk driver
Updates:
- Correct data in various SoC clk drivers
- Allow clkaN to be optional in the Qualcomm RPMh clock controller
driver if command db doesn't define it
- Change Kconfig options to not enable by default during compile
testing
- Add missing clks in various SoC clk drivers
- Remove some duplicate clk DT bindings and convert some more to
YAML"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (93 commits)
clk: qcom: gcc-x1e80100: Set FORCE MEM CORE for UFS clocks
clk: qcom: gcc: Set FORCE_MEM_CORE_ON for gcc_ufs_axi_clk for 8650/8750
clk: qcom: rpmh: make clkaN optional
clk: qcom: Add support for Camera Clock Controller on QCS8300
clk: rockchip: rk3528: add slab.h header include
clk: rockchip: rk3576: add missing slab.h include
clk: meson: Do not enable by default during compile testing
clk: meson-g12a: add missing fclk_div2 to spicc
clk: qcom: gcc-msm8939: Fix mclk0 & mclk1 for 24 MHz
clk: rockchip: rename gate-grf clk file
clk: rockchip: rename branch_muxgrf to branch_grf_mux
clk: sunxi-ng: ccu: add Display Engine 3.3 (DE33) support
dt-bindings: allwinner: add H616 DE33 clock binding
clk: samsung: correct clock summary for hsi1 block
dt-bindings: clock: add SM6350 QCOM video clock bindings
clk: rockchip: Pass NULL as reg pointer when registering GRF MMC clocks
clk: sunxi-ng: h616: Add LVDS reset for LCD TCON
dt-bindings: clock: sun50i-h616-ccu: Add LVDS reset
clk: rockchip: rk3036: mark ddrphy as critical
clk: rockchip: rk3036: fix implementation of usb480m clock mux
...
|
|
The D1/R528/T113 SoCs have a hidden divider of 2 in the MMC mod clocks,
just as other recent SoCs. So far we did not describe that, which led
to the resulting MMC clock rate to be only half of its intended value.
Use a macro that allows to describe a fixed post-divider, to compensate
for that divisor.
This brings the MMC performance on those SoCs to its expected level,
so about 23 MB/s for SD cards, instead of the 11 MB/s measured so far.
Fixes: 35b97bb94111 ("clk: sunxi-ng: Add support for the D1 SoC clocks")
Reported-by: Kuba Szczodrzyński <kuba@szczodrzynski.pl>
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250501120631.837186-1-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The DE33 is a newer version of the Allwinner Display Engine IP block,
found in the H616, H618, H700 and T507 SoCs. DE2 and DE3 are already
supported by the mainline driver.
The DE33 in the H616 has mixer0 and writeback units. The clocks
and resets required are identical to the H3 and H5 respectively, so use
those existing structs for the H616 description.
There are two additional 32-bit registers (at offsets 0x24 and 0x28)
which require clearing and setting respectively to bring up the
hardware. The function of these registers is currently unknown, and the
values are taken from the out-of-tree driver.
Add the required clock description struct and compatible string to the
DE2 driver.
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Link: https://patch.msgid.link/20250511104042.24249-9-ryan@testtoast.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Add the required LVDS reset for the LCD TCON. Note that while this
reset is exposed for the T507, H616, and H700 only the H700 has
an LCD controller.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250507201943.330111-3-macroalpha82@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
When introducing the SUNXI_CCU_MP_DATA_WITH_MUX_GATE_FEAT macro, the order
of the last two arguments was different between the users and the
definition: features became flags and flags became features.
This just didn't end up in a disaster yet because most users ended up
passing 0 for both arguments, and other clocks (for the new A523 SoC) are
not yet used.
Swap the order of the arguments in the definition, so that users stay
untouched.
Fixes: cdbb9d0d09db ("clk: sunxi-ng: mp: provide wrappers for setting feature flags")
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250430095325.477311-1-andre.przywara@arm.com
[wens@csie.org: fix typo in commit message]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Enabling the compile test should not cause automatic enabling of all
drivers. Restrict the default to ARCH also for individual drivers, even
though their choice is not visible without selecting parent Kconfig
symbol, because otherwise selecting parent would select the child during
compile testing.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250404-kconfig-defaults-clk-v1-4-4d2df5603332@linaro.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The A523/T527 SoCs have clock/reset controls in the PRCM part, like many
previous SoCs. For a change, the whole PRCM is documented in the A523
manual, including the system bus tree, so we can describe all those
clocks correctly based on that. There layout seems to be derived from
the H6 and H616 PRCM CCUs, though there are more clocks, and many clocks
have subtly changed.
Describe all the mod and gate clocks, including the three bus clocks
(R_AHB, R_APB0, and R_APB1).
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-15-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Allwinner SoCs do not contain a separate reset controller, instead the
reset lines for the various devices are integrated into the "BGR" (Bus
Gate / Reset) registers, for each device group: one for all UARTs, one
for all SPI interfaces, and so on.
The Allwinner CCU driver also doubles as a reset provider, and since the
reset lines are indeed just single bits in those BGR register, we can
represent them easily in an array of structs, just containing the
register offset and the bit number.
Add the location of the reset bits for all devices in the A523/T527
SoCs, using the existing sunxi CCU infrastructure.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-14-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Add the various bus clock gates that control access to the devices'
register interface.
These clocks are each just one bit, typically the lower bits in some "BGR"
(Bus Gate / Reset) registers, for each device group: one for all UARTs,
one for all SPI interfaces, and so on.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-13-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Add the remaining mod clocks, driving various parts of the SoC: the "LEDC"
LED controller, the "CSI" camera interface, the "ISP" image processor,
the DSP clock, and the "fanout" clocks, which allow to put clock signals
on external pins.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-12-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Add the clocks driving the USB subsystem: this just covers the two
clocks creating the 12 MHz rate for the OHCI (USB 1.x) device. The rest
of the USB clocks are either gate clocks (added later) or created
internal to the USB IP.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-11-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Add the clocks driving what the user manual summarises under "interface"
devices: raw NAND flash, MMC, SPI, EMAC, "IR" infrared, and the "GPADC"
general purpose analogue/digital converter.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-10-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Add the clocks driving some core system related subsystems of the SoC:
the "CE" crypto engine, the high speed timers, the DRAM and the associated
MBUS clock, and the PCIe clock.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-9-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Add the clocks driving the various video subsystems of the SoC: the "DE"
display engine, the "DI" deinterlacer, the "G2D" 2D graphics system, the
Mali "GPU", the "VE" video engine, its associated IOMMU, as well as the
clocks for the various video output drivers (HDMI, DP, LCDs).
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-8-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Add the basic bus clocks for the Allwinner A523 and T527 SoCs.
This covers the AHB, APB0 and APB1 clocks. Linux is not supposed to
change those clocks, but they are needed as parents for many other mod
clocks.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-7-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Add the PLL clocks of the main CCU of the Allwinner A523 and T527 SoCs.
The clocks were modelled after the A523 and T527 manual, and double
checked by writing all 1's into the respective register, to spot all
implemented bits.
The PLL and mod clocks for the two CPU clusters and the DSU are part of
a separate CCU, also most audio clocks are collected in a DSP CCU, so
both of these clock groups are missing from this driver.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-6-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Some clocks in the Allwinner A523 SoC contain an "update bit" (bit 27),
which must be set to apply any register changes, namely the mux
selector, the divider and the gate bit.
Add a new CCU feature bit to mark those clocks, and set bit 27 whenever
we are applying any changes.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-4-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
So far our sunxi clock instantiation macros set the required clock
features depending on the clock type, but the new "dual divider MP
clock" requires us to pass that piece of information in by the user.
Add new wrapper macros that allow to specify a "features" field, to
allow marking those dual-divider clocks accordingly. Also add two
convenience macros that deal with the most common cases.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250307002628.10684-3-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The Allwinner A523 SoC introduces some new MP-style mod clock, where the
second "P" divider is an actual numerical divider value, and not the
numbers of bits to shift (1..32 instead of 1,2,4,8).
The rest of the clock is the same as the existing MP clock, so enhance the
existing code to accommodate for this.
Introduce the new CCU feature bit CCU_FEATURE_DUAL_DIV to mark an MP
clock as having two dividers, and change the dividing and encoding code
to differentiate the two cases.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://patch.msgid.link/20250307002628.10684-2-andre.przywara@arm.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The H616 manual does not state that the GPU PLL supports
dynamic frequency configuration, so we must take extra care when changing
the frequency. Currently any attempt to do device DVFS on the GPU lead
to panfrost various ooops, and GPU hangs.
The manual describes the algorithm for changing the PLL
frequency, which the CPU PLL notifier code already support, so we reuse
that to reparent the GPU clock to GPU1 clock during frequency
changes.
Signed-off-by: Philippe Simons <simons.philippe@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://patch.msgid.link/20250220113808.1122414-2-simons.philippe@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Add the required clock and reset which is used for the LCD TCON. Please
note that these clocks are exposed on the T507, H616, and H700; however
the H616 does not expose an LCD controller for which these clocks are
needed.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Tested-by: Ryan Walklin <ryan@testtoast.com>
Link: https://patch.msgid.link/20250213172248.158447-3-macroalpha82@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"A pretty quiet cycle this time around. We have a bunch of new Qualcomm
clk drivers, per usual, and then a handful of drivers for other SoCs.
Then the usual pile of cleanups is fairly small data fixes or
converting DT bindings to YAML so they can be validated.
No changes to the core framework besides an OF node refcount bump that
never got decremented.
New Drivers:
- 5L35023 variant of Versa 3 clock generator
- Various Qualcomm clk controllers: IPQ CMN PLL, SM6115 LPASS, SM750
global, tcsr, rpmh, and display. X Plus GPU and global. QCS615 rpmh
and MSM8937 and MSM8940 RPM.
- Qualcomm Pongo and Taycan Alpha PLLs
- Qualcomm IPQ5424 NoC-related interconnect clks
- Renesas RZ/G3E (R9A09G047) SoC clk driver
- SAMA7D65 SoC clk driver
- Samsung Exynos990 SoC clk driver"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (159 commits)
clk: analogbits: Fix incorrect calculation of vco rate delta
clk: bcm: rpi: Add disp clock
clk: bcm: rpi: Create helper to retrieve private data
clk: bcm: rpi: Enable minimize for all firmware clocks
clk: bcm: rpi: Allow cpufreq driver to also adjust gpu clocks
clk: bcm: rpi: Add ISP to exported clocks
clk: stm32f4: support spread spectrum clock generation
clk: stm32f4: use FIELD helpers to access the PLLCFGR fields
dt-bindings: clock: st,stm32-rcc: support spread spectrum clocking
dt-bindings: clock: convert stm32 rcc bindings to json-schema
clk: Use str_enable_disable-like helpers
clk: clk-loongson2: Fix the number count of clk provider
clk: clk-loongson2: Switch to use devm_clk_hw_register_fixed_rate_parent_data()
clk: starfive: Make _clk_get become a common helper function
clk: en7523: Add clock for eMMC for EN7581
dt-bindings: clock: add ID for eMMC for EN7581
dt-bindings: clock: drop NUM_CLOCKS define for EN7581
clk: en7523: Rework clock handling for different clock numbers
clk: thead: Fix cpu2vp_clk for TH1520 AP_SUBSYS clocks
clk: thead: Add CLK_IGNORE_UNUSED to fix TH1520 boot
...
|
|
* clk-fixes:
clk: clk-loongson2: Fix the number count of clk provider
clk: mmp2: call pm_genpd_init() only after genpd.name is set
clk: sunxi-ng: a100: enable MMC clock reparenting
clk: clk-imx8mp-audiomix: fix function signature
clk: thead: Fix TH1520 emmc and shdci clock rate
|
|
The H616 user manual recommends to re-parent the CPU clock during
frequency changes of the PLL, and recommends PLL_PERI0(1X), which runs
at 600 MHz. Also it asks to disable and then re-enable the PLL lock bit,
after the factor changes have been applied.
Add clock notifiers for the PLL and the CPU mux clock, using the existing
notifier callbacks, and tell them to use mux 4 (the PLL_PERI0(1X) source),
and bit 29 (the LOCK_ENABLE) bit. The existing code already follows the
correct algorithms.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Link: https://lore.kernel.org/r/20241025105620.1891596-1-andre.przywara@arm.com
Tested-by: Evgeny Boger <boger@wirenboard.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
|
|
Stop force-selecting PLL-MIPI as TCON0 parent, since it breaks video
output on Pinebook that uses RGB to eDP bridge.
Partially revert commit ca1170b69968 ("clk: sunxi-ng: a64: force
select PLL_MIPI in TCON0 mux"), while still leaving
CLK_SET_RATE_NO_REPARENT flag set, since we do not want the clock to
be reparented.
The issue is that apparently different TCON0 outputs require a different
clock, or the mux might be selecting the output type.
I did an experiment: I manually configured PLL_MIPI and PLL_VIDEO0_2X
to the same clock rate and flipped the switch with devmem. Experiment
clearly showed that whenever PLL_MIPI is selected as TCON0 clock parent,
the video output stops working.
Therefore, TCON0 clock parent corresponding to the output type must be
assigned in the device tree.
Fixes: ca1170b69968 ("clk: sunxi-ng: a64: force select PLL_MIPI in TCON0 mux")
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Frank Oltmanns <frank@oltmanns.dev> # on PinePhone
Tested-by: Stuart Gathman <stuart@gathman.org> # on OG Pinebook
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Link: https://patch.msgid.link/20250104074035.1611136-5-anarsoul@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
Drop redundant CLK_PLL_VIDEO0_2X and CLK_PLL.MIPI. These are now
defined in dt-bindings/clock/sun50i-a64-ccu.h
Fixes: ca1170b69968 ("clk: sunxi-ng: a64: force select PLL_MIPI in TCON0 mux")
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Tested-by: Frank Oltmanns <frank@oltmanns.dev> # on pinephone
Tested-by: Stuart Gathman <stuart@gathman.org> # on OG pinebook
Signed-off-by: Vasily Khoruzhick <anarsoul@gmail.com>
Link: https://patch.msgid.link/20250104074035.1611136-3-anarsoul@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
While testing the MMC nodes proposed in [1], it was noted that mmc0/1
would fail to initialize, with "mmc: fatal err update clk timeout" in
the kernel logs. A closer look at the clock definitions showed that the MMC
MPs had the "CLK_SET_RATE_NO_REPARENT" flag set. No reason was given for
adding this flag in the first place, and its original purpose is unknown,
but it doesn't seem to make sense and results in severe limitations to MMC
speeds. Thus, remove this flag from the 3 MMC MPs.
[1] https://msgid.link/20241024170540.2721307-10-masterr3c0rd@epochal.quest
Fixes: fb038ce4db55 ("clk: sunxi-ng: add support for the Allwinner A100 CCU")
Cc: stable@vger.kernel.org
Signed-off-by: Cody Eksal <masterr3c0rd@epochal.quest>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20241109003739.3440904-1-masterr3c0rd@epochal.quest
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
