| Age | Commit message (Collapse) | Author |
|---|
|
Linux 6.19-rc2 (9448598b22c5 ("Linux 6.19-rc2")) is crashing with a NULL
pointer dereference on arm64 hosts:
Unable to handle kernel NULL pointer dereference at virtual address 00000000000000c8
pc : cap_capable (security/commoncap.c:82 security/commoncap.c:128)
Call trace:
cap_capable (security/commoncap.c:82 security/commoncap.c:128) (P)
security_capable (security/security.c:?)
ns_capable_noaudit (kernel/capability.c:342 kernel/capability.c:381)
__ptrace_may_access (./include/linux/rcupdate.h:895 kernel/ptrace.c:326)
ptrace_may_access (kernel/ptrace.c:353)
do_task_stat (fs/proc/array.c:467)
proc_tgid_stat (fs/proc/array.c:673)
proc_single_show (fs/proc/base.c:803)
I've bissected the problem to commit a5baf582f4c0 ("arm64/efi: Call EFI
runtime services without disabling preemption").
>From my analyzes, the crash occurs because efi_mm lacks a user_ns field
initialization. This was previously harmless, but commit a5baf582f4c0
("arm64/efi: Call EFI runtime services without disabling preemption")
changed the EFI runtime call path to use kthread_use_mm(&efi_mm), which
temporarily adopts efi_mm as the current mm for the calling kthread.
When a thread has an active mm, LSM hooks like cap_capable() expect
mm->user_ns to be valid for credential checks. With efi_mm.user_ns being
NULL, capability checks during possible /proc access dereference the
NULL pointer and crash.
Fix by initializing efi_mm.user_ns to &init_user_ns.
Fixes: a5baf582f4c0 ("arm64/efi: Call EFI runtime services without disabling preemption")
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Rik van Riel <riel@surriel.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The efi_edid_discovered_protocol and efi_edid_active_protocol have mixed
mode fields. So all their attributes should be accessed through
the efi_table_attr() helper.
Doing so fixes the upper 32 bits of the 64 bit gop_edid pointer getting
set to random values (followed by a crash at boot) when booting a x86_64
kernel on a machine with 32 bit UEFI like the Asus T100TA.
Fixes: 17029cdd8f9d ("efi/libstub: gop: Add support for reading EDID")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen:
- Add basic LoongArch32 support
Note: Build infrastructures of LoongArch32 are not enabled yet,
because we need to adjust irqchip drivers and wait for GNU toolchain
be upstream first.
- Select HAVE_ARCH_BITREVERSE in Kconfig
- Fix build and boot for CONFIG_RANDSTRUCT
- Correct the calculation logic of thread_count
- Some bug fixes and other small changes
* tag 'loongarch-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (22 commits)
LoongArch: Adjust default config files for 32BIT/64BIT
LoongArch: Adjust VDSO/VSYSCALL for 32BIT/64BIT
LoongArch: Adjust misc routines for 32BIT/64BIT
LoongArch: Adjust user accessors for 32BIT/64BIT
LoongArch: Adjust system call for 32BIT/64BIT
LoongArch: Adjust module loader for 32BIT/64BIT
LoongArch: Adjust time routines for 32BIT/64BIT
LoongArch: Adjust process management for 32BIT/64BIT
LoongArch: Adjust memory management for 32BIT/64BIT
LoongArch: Adjust boot & setup for 32BIT/64BIT
LoongArch: Adjust common macro definitions for 32BIT/64BIT
LoongArch: Add adaptive CSR accessors for 32BIT/64BIT
LoongArch: Add atomic operations for 32BIT/64BIT
LoongArch: Add new PCI ID for pci_fixup_vgadev()
LoongArch: Add and use some macros for AVEC
LoongArch: Correct the calculation logic of thread_count
LoongArch: Use unsigned long for _end and _text
LoongArch: Use __pmd()/__pte() for swap entry conversions
LoongArch: Fix arch_dup_task_struct() for CONFIG_RANDSTRUCT
LoongArch: Fix build errors for CONFIG_RANDSTRUCT
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux
Pull clk updates from Stephen Boyd:
"This is entirely SoC clk drivers.
The majority diff wise is for the new Rockchip and Qualcomm clk
drivers which is mostly lines and lines of data structures to describe
the clk hardware in these SoCs. Beyond those two, Renesas continues to
incrementally add clks to their SoC drivers, causing them to show up
higher in the diffstat this time because they added quite a few clks
all over the place.
Overall it is a semi-quiet release that has some new clk drivers and
the usual fixes for clock data that was wrong or missing and
non-critical cleanups that plug error paths or fix typos.
New Drivers:
- Qualcomm IPQ5424 Network Subsystem Clock Controller
- Qualcomm SM8750 Video Clock Controller
- Rockchip RV1126B and RK3506 clock drivers
- i.MX8ULP SIM LPAV clock driver
- Samsung ACPM (firmware interface) clock driver
- Altera Agilex5 clock driver"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (117 commits)
clk: keystone: fix compile testing
clk: keystone: syscon-clk: fix regmap leak on probe failure
clk: qcom: Mark camcc_sm7150_hws static
clk: samsung: exynos-clkout: Assign .num before accessing .hws
clk: rockchip: Add clock and reset driver for RK3506
dt-bindings: clock: rockchip: Add RK3506 clock and reset unit
clk: actions: Fix discarding const qualifier by 'container_of' macro
clk: spacemit: Set clk_hw_onecell_data::num before using flex array
clk: visconti: Add VIIF clocks
dt-bindings: clock: tmpv770x: Add VIIF clocks
dt-bindings: clock: tmpv770x: Remove definition of number of clocks
clk: visconti: Do not define number of clocks in bindings
clk: rockchip: Add clock controller for the RV1126B
dt-bindings: clock, reset: Add support for rv1126b
clk: rockchip: Implement rockchip_clk_register_armclk_multi_pll()
clk: qcom: x1e80100-dispcc: Add USB4 router link resets
dt-bindings: clock: qcom: x1e80100-dispcc: Add USB4 router link resets
clk: qcom: videocc-sm8750: Add video clock controller driver for SM8750
dt-bindings: clock: qcom: Add SM8750 video clock controller
clk: qcom: branch: Extend invert logic for branch2 mem clocks
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc/IIO driver updates from Greg KH:
"Here is the big set of char/misc/iio driver updates for 6.19-rc1. Lots
of stuff in here including:
- lots of IIO driver updates, cleanups, and additions
- large interconnect driver changes as they get converted over to a
dynamic system of ids
- coresight driver updates
- mwave driver updates
- binder driver updates and changes
- comedi driver fixes now that the fuzzers are being set loose on
them
- nvmem driver updates
- new uio driver addition
- lots of other small char/misc driver updates, full details in the
shortlog
All of these have been in linux-next for a while now"
* tag 'char-misc-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (304 commits)
char: applicom: fix NULL pointer dereference in ac_ioctl
hangcheck-timer: fix coding style spacing
hangcheck-timer: Replace %Ld with %lld
hangcheck-timer: replace printk(KERN_CRIT) with pr_crit
uio: Add SVA support for PCI devices via uio_pci_generic_sva.c
dt-bindings: slimbus: fix warning from example
intel_th: Fix error handling in intel_th_output_open
misc: rp1: Fix an error handling path in rp1_probe()
char: xillybus: add WQ_UNBOUND to alloc_workqueue users
misc: bh1770glc: use pm_runtime_resume_and_get() in power_state_store
misc: cb710: Fix a NULL vs IS_ERR() check in probe()
mux: mmio: Add suspend and resume support
virt: acrn: split acrn_mmio_dev_res out of acrn_mmiodev
greybus: gb-beagleplay: Fix timeout handling in bootloader functions
greybus: add WQ_PERCPU to alloc_workqueue users
char/mwave: drop typedefs
char/mwave: drop printk wrapper
char/mwave: remove printk tracing
char/mwave: remove unneeded fops
char/mwave: remove MWAVE_FUTZ_WITH_OTHER_DEVICES ifdeffery
...
|
|
Pull SCSI updates from James Bottomley:
"Usual driver updates (ufs, lpfc, target, qla2xxx) plus assorted
cleanups and fixes including the WQ_PERCPU series.
The biggest core change is the new allocation of pseudo-devices which
allow the sending of internal commands to a given SCSI target"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (147 commits)
scsi: MAINTAINERS: Add the UFS include directory
scsi: scsi_debug: Support injecting unaligned write errors
scsi: qla2xxx: Fix improper freeing of purex item
scsi: ufs: rockchip: Fix compile error without CONFIG_GPIOLIB
scsi: ufs: rockchip: Reset controller on PRE_CHANGE of hce enable notify
scsi: ufs: core: Use scsi_device_busy()
scsi: ufs: core: Fix single doorbell mode support
scsi: pm80xx: Add WQ_PERCPU to alloc_workqueue() users
scsi: target: Add WQ_PERCPU to alloc_workqueue() users
scsi: qedi: Add WQ_PERCPU to alloc_workqueue() users
scsi: target: ibmvscsi: Add WQ_PERCPU to alloc_workqueue() users
scsi: qedf: Add WQ_PERCPU to alloc_workqueue() users
scsi: bnx2fc: Add WQ_PERCPU to alloc_workqueue() users
scsi: be2iscsi: Add WQ_PERCPU to alloc_workqueue() users
scsi: message: fusion: Add WQ_PERCPU to alloc_workqueue() users
scsi: lpfc: WQ_PERCPU added to alloc_workqueue() users
scsi: scsi_transport_fc: WQ_PERCPU added to alloc_workqueue users()
scsi: scsi_dh_alua: WQ_PERCPU added to alloc_workqueue() users
scsi: qla2xxx: WQ_PERCPU added to alloc_workqueue() users
scsi: target: sbp: Replace use of system_unbound_wq with system_dfl_wq
...
|
|
32BIT platforms only have 32bit CSR/IOCSR registers, 64BIT platforms
have both 32bit/64bit CSR/IOCSR registers. Now there are both 32bit and
64bit CSR accessors:
csr_read32()/csr_write32()/csr_xchg32();
csr_read64()/csr_write64()/csr_xchg64();
Some CSR registers (address and timer registers) are 32bit length on
32BIT platform and 64bit length on 64BIT platform. To avoid #ifdefs here
and there, they need adaptive accessors, so we define and use:
csr_read()/csr_write()/csr_xchg();
IOCSR doesn't have a "natural length", which means a 64bit register can
be treated as two 32bit registers, so we just use two 32bit accessors to
emulate a 64bit accessors.
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Huacai Chen <chenhuacai@loongson.cn>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC driver updates from Arnd Bergmann:
"This is the first half of the driver changes:
- A treewide interface change to the "syscore" operations for power
management, as a preparation for future Tegra specific changes
- Reset controller updates with added drivers for LAN969x, eic770 and
RZ/G3S SoCs
- Protection of system controller registers on Renesas and Google
SoCs, to prevent trivially triggering a system crash from e.g.
debugfs access
- soc_device identification updates on Nvidia, Exynos and Mediatek
- debugfs support in the ST STM32 firewall driver
- Minor updates for SoC drivers on AMD/Xilinx, Renesas, Allwinner, TI
- Cleanups for memory controller support on Nvidia and Renesas"
* tag 'soc-drivers-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (114 commits)
memory: tegra186-emc: Fix missing put_bpmp
Documentation: reset: Remove reset_controller_add_lookup()
reset: fix BIT macro reference
reset: rzg2l-usbphy-ctrl: Fix a NULL vs IS_ERR() bug in probe
reset: th1520: Support reset controllers in more subsystems
reset: th1520: Prepare for supporting multiple controllers
dt-bindings: reset: thead,th1520-reset: Add controllers for more subsys
dt-bindings: reset: thead,th1520-reset: Remove non-VO-subsystem resets
reset: remove legacy reset lookup code
clk: davinci: psc: drop unused reset lookup
reset: rzg2l-usbphy-ctrl: Add support for RZ/G3S SoC
reset: rzg2l-usbphy-ctrl: Add support for USB PWRRDY
dt-bindings: reset: renesas,rzg2l-usbphy-ctrl: Document RZ/G3S support
reset: eswin: Add eic7700 reset driver
dt-bindings: reset: eswin: Documentation for eic7700 SoC
reset: sparx5: add LAN969x support
dt-bindings: reset: microchip: Add LAN969x support
soc: rockchip: grf: Add select correct PWM implementation on RK3368
soc/tegra: pmc: Add USB wake events for Tegra234
amba: tegra-ahb: Fix device leak on SMMU enable
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull MM updates from Andrew Morton:
"__vmalloc()/kvmalloc() and no-block support" (Uladzislau Rezki)
Rework the vmalloc() code to support non-blocking allocations
(GFP_ATOIC, GFP_NOWAIT)
"ksm: fix exec/fork inheritance" (xu xin)
Fix a rare case where the KSM MMF_VM_MERGE_ANY prctl state is not
inherited across fork/exec
"mm/zswap: misc cleanup of code and documentations" (SeongJae Park)
Some light maintenance work on the zswap code
"mm/page_owner: add debugfs files 'show_handles' and 'show_stacks_handles'" (Mauricio Faria de Oliveira)
Enhance the /sys/kernel/debug/page_owner debug feature by adding
unique identifiers to differentiate the various stack traces so
that userspace monitoring tools can better match stack traces over
time
"mm/page_alloc: pcp->batch cleanups" (Joshua Hahn)
Minor alterations to the page allocator's per-cpu-pages feature
"Improve UFFDIO_MOVE scalability by removing anon_vma lock" (Lokesh Gidra)
Address a scalability issue in userfaultfd's UFFDIO_MOVE operation
"kasan: cleanups for kasan_enabled() checks" (Sabyrzhan Tasbolatov)
"drivers/base/node: fold node register and unregister functions" (Donet Tom)
Clean up the NUMA node handling code a little
"mm: some optimizations for prot numa" (Kefeng Wang)
Cleanups and small optimizations to the NUMA allocation hinting
code
"mm/page_alloc: Batch callers of free_pcppages_bulk" (Joshua Hahn)
Address long lock hold times at boot on large machines. These were
causing (harmless) softlockup warnings
"optimize the logic for handling dirty file folios during reclaim" (Baolin Wang)
Remove some now-unnecessary work from page reclaim
"mm/damon: allow DAMOS auto-tuned for per-memcg per-node memory usage" (SeongJae Park)
Enhance the DAMOS auto-tuning feature
"mm/damon: fixes for address alignment issues in DAMON_LRU_SORT and DAMON_RECLAIM" (Quanmin Yan)
Fix DAMON_LRU_SORT and DAMON_RECLAIM with certain userspace
configuration
"expand mmap_prepare functionality, port more users" (Lorenzo Stoakes)
Enhance the new(ish) file_operations.mmap_prepare() method and port
additional callsites from the old ->mmap() over to ->mmap_prepare()
"Fix stale IOTLB entries for kernel address space" (Lu Baolu)
Fix a bug (and possible security issue on non-x86) in the IOMMU
code. In some situations the IOMMU could be left hanging onto a
stale kernel pagetable entry
"mm/huge_memory: cleanup __split_unmapped_folio()" (Wei Yang)
Clean up and optimize the folio splitting code
"mm, swap: misc cleanup and bugfix" (Kairui Song)
Some cleanups and a minor fix in the swap discard code
"mm/damon: misc documentation fixups" (SeongJae Park)
"mm/damon: support pin-point targets removal" (SeongJae Park)
Permit userspace to remove a specific monitoring target in the
middle of the current targets list
"mm: MISC follow-up patches for linux/pgalloc.h" (Harry Yoo)
A couple of cleanups related to mm header file inclusion
"mm/swapfile.c: select swap devices of default priority round robin" (Baoquan He)
improve the selection of swap devices for NUMA machines
"mm: Convert memory block states (MEM_*) macros to enums" (Israel Batista)
Change the memory block labels from macros to enums so they will
appear in kernel debug info
"ksm: perform a range-walk to jump over holes in break_ksm" (Pedro Demarchi Gomes)
Address an inefficiency when KSM unmerges an address range
"mm/damon/tests: fix memory bugs in kunit tests" (SeongJae Park)
Fix leaks and unhandled malloc() failures in DAMON userspace unit
tests
"some cleanups for pageout()" (Baolin Wang)
Clean up a couple of minor things in the page scanner's
writeback-for-eviction code
"mm/hugetlb: refactor sysfs/sysctl interfaces" (Hui Zhu)
Move hugetlb's sysfs/sysctl handling code into a new file
"introduce VM_MAYBE_GUARD and make it sticky" (Lorenzo Stoakes)
Make the VMA guard regions available in /proc/pid/smaps and
improves the mergeability of guarded VMAs
"mm: perform guard region install/remove under VMA lock" (Lorenzo Stoakes)
Reduce mmap lock contention for callers performing VMA guard region
operations
"vma_start_write_killable" (Matthew Wilcox)
Start work on permitting applications to be killed when they are
waiting on a read_lock on the VMA lock
"mm/damon/tests: add more tests for online parameters commit" (SeongJae Park)
Add additional userspace testing of DAMON's "commit" feature
"mm/damon: misc cleanups" (SeongJae Park)
"make VM_SOFTDIRTY a sticky VMA flag" (Lorenzo Stoakes)
Address the possible loss of a VMA's VM_SOFTDIRTY flag when that
VMA is merged with another
"mm: support device-private THP" (Balbir Singh)
Introduce support for Transparent Huge Page (THP) migration in zone
device-private memory
"Optimize folio split in memory failure" (Zi Yan)
"mm/huge_memory: Define split_type and consolidate split support checks" (Wei Yang)
Some more cleanups in the folio splitting code
"mm: remove is_swap_[pte, pmd]() + non-swap entries, introduce leaf entries" (Lorenzo Stoakes)
Clean up our handling of pagetable leaf entries by introducing the
concept of 'software leaf entries', of type softleaf_t
"reparent the THP split queue" (Muchun Song)
Reparent the THP split queue to its parent memcg. This is in
preparation for addressing the long-standing "dying memcg" problem,
wherein dead memcg's linger for too long, consuming memory
resources
"unify PMD scan results and remove redundant cleanup" (Wei Yang)
A little cleanup in the hugepage collapse code
"zram: introduce writeback bio batching" (Sergey Senozhatsky)
Improve zram writeback efficiency by introducing batched bio
writeback support
"memcg: cleanup the memcg stats interfaces" (Shakeel Butt)
Clean up our handling of the interrupt safety of some memcg stats
"make vmalloc gfp flags usage more apparent" (Vishal Moola)
Clean up vmalloc's handling of incoming GFP flags
"mm: Add soft-dirty and uffd-wp support for RISC-V" (Chunyan Zhang)
Teach soft dirty and userfaultfd write protect tracking to use
RISC-V's Svrsw60t59b extension
"mm: swap: small fixes and comment cleanups" (Youngjun Park)
Fix a small bug and clean up some of the swap code
"initial work on making VMA flags a bitmap" (Lorenzo Stoakes)
Start work on converting the vma struct's flags to a bitmap, so we
stop running out of them, especially on 32-bit
"mm/swapfile: fix and cleanup swap list iterations" (Youngjun Park)
Address a possible bug in the swap discard code and clean things
up a little
[ This merge also reverts commit ebb9aeb980e5 ("vfio/nvgrace-gpu:
register device memory for poison handling") because it looks
broken to me, I've asked for clarification - Linus ]
* tag 'mm-stable-2025-12-03-21-26' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (321 commits)
mm: fix vma_start_write_killable() signal handling
mm/swapfile: use plist_for_each_entry in __folio_throttle_swaprate
mm/swapfile: fix list iteration when next node is removed during discard
fs/proc/task_mmu.c: fix make_uffd_wp_huge_pte() huge pte handling
mm/kfence: add reboot notifier to disable KFENCE on shutdown
memcg: remove inc/dec_lruvec_kmem_state helpers
selftests/mm/uffd: initialize char variable to Null
mm: fix DEBUG_RODATA_TEST indentation in Kconfig
mm: introduce VMA flags bitmap type
tools/testing/vma: eliminate dependency on vma->__vm_flags
mm: simplify and rename mm flags function for clarity
mm: declare VMA flags by bit
zram: fix a spelling mistake
mm/page_alloc: optimize lowmem_reserve max lookup using its semantic monotonicity
mm/vmscan: skip increasing kswapd_failures when reclaim was boosted
pagemap: update BUDDY flag documentation
mm: swap: remove scan_swap_map_slots() references from comments
mm: swap: change swap_alloc_slow() to void
mm, swap: remove redundant comment for read_swap_cache_async
mm, swap: use SWP_SOLIDSTATE to determine if swap is rotational
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel:
"The usual trickle of EFI contributions:
- Parse SMBIOS tables in memory directly on Macbooks that do not
implement the EFI SMBIOS protocol
- Obtain EDID information from the primary display while running in
the EFI stub, and expose it via bootparams on x86 (generic method
is in the works, and will likely land during the next cycle)
- Bring CPER handling for ARM systems up to data with the latest EFI
spec changes
- Various cosmetic changes"
* tag 'efi-next-for-v6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi:
docs: efi: add CPER functions to driver-api
efi/cper: align ARM CPER type with UEFI 2.9A/2.10 specs
efi/cper: Add a new helper function to print bitmasks
efi/cper: Adjust infopfx size to accept an extra space
RAS: Report all ARM processor CPER information to userspace
efi/libstub: x86: Store EDID in boot_params
efi/libstub: gop: Add support for reading EDID
efi/libstub: gop: Initialize screen_info in helper function
efi/libstub: gop: Find GOP handle instead of GOP data
efi: Fix trailing whitespace in header file
efi/memattr: Convert efi_memattr_init() return type to void
efi: stmm: fix kernel-doc "bad line" warnings
efi/riscv: Remove the useless failure return message print
efistub/x86: Add fallback for SMBIOS record lookup
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT bindings:
- Convert lattice,ice40-fpga-mgr, apm,xgene-storm-dma,
brcm,sr-thermal, amazon,al-thermal, brcm,ocotp, mt8173-mdp, Actions
Owl SPS, Marvell AP80x System Controller, Marvell CP110 System
Controller, cznic,moxtet, and apm,xgene-slimpro-mbox to DT schema
format
- Add i.MX95 fsl,irqsteer, MT8365 Mali Bifrost GPU, Anvo ANV32C81W
EEPROM, and Microchip pic64gx PLIC
- Add missing LGE, AMD Seattle, and APM X-Gene SoC platform
compatibles
- Updates to brcm,bcm2836-l1-intc, brcm,bcm2835-hvs, and bcm2711-hdmi
bindings to fix warnings on BCM2712 platforms
- Drop obsolete db8500-thermal.txt
- Treewide clean-up of extra blank lines and inconsistent quoting
- Ensure all .dtbo targets are applied to a base .dtb
- Speed up dt_binding_check by skipping running validation on empty
examples
DT core:
- Add of_machine_device_match() and of_machine_get_match_data()
helpers and convert users treewide
- Fix bounds checking of address properties in FDT code. Rework the
code to have a single implementation of the bounds checks.
- Rework of_irq_init() to ignore any implicit interrupt-parent (i.e.
in a parent node) on nodes without an interrupt. This matches the
spec description and fixes some RISC-V platforms.
- Avoid a spurious message on overlay removal
- Skip DT kunit tests on RISCV+ACPI"
* tag 'devicetree-for-6.19' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (55 commits)
dt-bindings: kbuild: Skip validating empty examples
dt-bindings: interrupt-controller: brcm,bcm2836-l1-intc: Drop interrupt-controller requirement
dt-bindings: display: Fix brcm,bcm2835-hvs bindings for BCM2712
dt-bindings: display: bcm2711-hdmi: Add interrupt details for BCM2712
of: Skip devicetree kunit tests when RISCV+ACPI doesn't populate root node
soc: tegra: Simplify with of_machine_device_match()
soc: qcom: ubwc: Simplify with of_machine_get_match_data()
powercap: dtpm: Simplify with of_machine_get_match_data()
platform: surface: Simplify with of_machine_get_match_data()
irqchip/atmel-aic: Simplify with of_machine_get_match_data()
firmware: qcom: scm: Simplify with of_machine_device_match()
cpuidle: big_little: Simplify with of_machine_device_match()
cpufreq: sun50i: Simplify with of_machine_device_match()
cpufreq: mediatek: Simplify with of_machine_get_match_data()
cpufreq: dt-platdev: Simplify with of_machine_get_match_data()
of: Add wrappers to match root node with OF device ID tables
dt-bindings: eeprom: at25: Add Anvo ANV32C81W
of/reserved_mem: Simplify the logic of __reserved_mem_alloc_size()
of/reserved_mem: Simplify the logic of fdt_scan_reserved_mem_reg_nodes()
of/reserved_mem: Simplify the logic of __reserved_mem_reserve_reg()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound updates from Takashi Iwai:
"The majority of changes at this time were about ASoC with a lot of
code refactoring works. From the functionality POV, there isn't much
to see, but we have a wide range of device-specific fixes and updates.
Here are some highlights:
- Continued ASoC API cleanup work, spanned over many files
- Added a SoundWire SCDA generic class driver with regmap support
- Enhancements and fixes for Cirrus, Intel, Maxim and Qualcomm.
- Support for ASoC Allwinner A523, Mediatek MT8189, Qualcomm QCM2290,
QRB2210 and SM6115, SpacemiT K1, and TI TAS2568, TAS5802, TAS5806,
TAS5815, TAS5828 and TAS5830
- Usual HD-audio and USB-audio quirks and fixups
- Support for Onkyo SE-300PCIE, TASCAM IF-FW/DM MkII
Some gpiolib changes for shared GPIOs are included along with this PR
for covering ASoC drivers changes"
* tag 'sound-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (739 commits)
ALSA: hda/realtek: Add PCI SSIDs to HP ProBook quirks
ALSA: usb-audio: Simplify with usb_endpoint_max_periodic_payload()
ALSA: hda/realtek: fix mute/micmute LEDs don't work for more HP laptops
ALSA: rawmidi: Fix inconsistent indenting warning reported by smatch
ALSA: dice: fix buffer overflow in detect_stream_formats()
ASoC: codecs: Modify awinic amplifier dsp read and write functions
ASoC: SDCA: Fixup some more Kconfig issues
ASoC: cs35l56: Log a message if firmware is missing
ASoC: nau8325: Delete a stray tab
firmware: cs_dsp: Add test cases for client_ops == NULL
firmware: cs_dsp: Don't require client to provide a struct cs_dsp_client_ops
ASoC: fsl_micfil: Set channel range control
ASoC: fsl_micfil: Add default quality for different platforms
ASoC: intel: sof_sdw: Add codec_info for cs42l45
ASoC: sdw_utils: Add cs42l45 support functions
ASoC: intel: sof_sdw: Add ability to have auxiliary devices
ASoC: sdw_utils: Move codec_name to dai info
ASoC: sdw_utils: Add codec_conf for every DAI
ASoC: SDCA: Add terminal type into input/output widget name
ASoC: SDCA: Align mute controls to ALSA expectations
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Catalin Marinas:
"These are the arm64 updates for 6.19.
The biggest part is the Arm MPAM driver under drivers/resctrl/.
There's a patch touching mm/ to handle spurious faults for huge pmd
(similar to the pte version). The corresponding arm64 part allows us
to avoid the TLB maintenance if a (huge) page is reused after a write
fault. There's EFI refactoring to allow runtime services with
preemption enabled and the rest is the usual perf/PMU updates and
several cleanups/typos.
Summary:
Core features:
- Basic Arm MPAM (Memory system resource Partitioning And Monitoring)
driver under drivers/resctrl/ which makes use of the fs/rectrl/ API
Perf and PMU:
- Avoid cycle counter on multi-threaded CPUs
- Extend CSPMU device probing and add additional filtering support
for NVIDIA implementations
- Add support for the PMUs on the NoC S3 interconnect
- Add additional compatible strings for new Cortex and C1 CPUs
- Add support for data source filtering to the SPE driver
- Add support for i.MX8QM and "DB" PMU in the imx PMU driver
Memory managemennt:
- Avoid broadcast TLBI if page reused in write fault
- Elide TLB invalidation if the old PTE was not valid
- Drop redundant cpu_set_*_tcr_t0sz() macros
- Propagate pgtable_alloc() errors outside of __create_pgd_mapping()
- Propagate return value from __change_memory_common()
ACPI and EFI:
- Call EFI runtime services without disabling preemption
- Remove unused ACPI function
Miscellaneous:
- ptrace support to disable streaming on SME-only systems
- Improve sysreg generation to include a 'Prefix' descriptor
- Replace __ASSEMBLY__ with __ASSEMBLER__
- Align register dumps in the kselftest zt-test
- Remove some no longer used macros/functions
- Various spelling corrections"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (94 commits)
arm64/mm: Document why linear map split failure upon vm_reset_perms is not problematic
arm64/pageattr: Propagate return value from __change_memory_common
arm64/sysreg: Remove unused define ARM64_FEATURE_FIELD_BITS
KVM: arm64: selftests: Consider all 7 possible levels of cache
KVM: arm64: selftests: Remove ARM64_FEATURE_FIELD_BITS and its last user
arm64: atomics: lse: Remove unused parameters from ATOMIC_FETCH_OP_AND macros
Documentation/arm64: Fix the typo of register names
ACPI: GTDT: Get rid of acpi_arch_timer_mem_init()
perf: arm_spe: Add support for filtering on data source
perf: Add perf_event_attr::config4
perf/imx_ddr: Add support for PMU in DB (system interconnects)
perf/imx_ddr: Get and enable optional clks
perf/imx_ddr: Move ida_alloc() from ddr_perf_init() to ddr_perf_probe()
dt-bindings: perf: fsl-imx-ddr: Add compatible string for i.MX8QM, i.MX8QXP and i.MX8DXL
arm64: remove duplicate ARCH_HAS_MEM_ENCRYPT
arm64: mm: use untagged address to calculate page index
MAINTAINERS: new entry for MPAM Driver
arm_mpam: Add kunit tests for props_mismatch()
arm_mpam: Add kunit test for bitmap reset
arm_mpam: Add helper to reset saved mbwu state
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm updates from Borislav Petkov:
- Use the proper accessors when reading CR3 as part of the page level
transitions (5-level to 4-level, the use case being kexec) so that
only the physical address in CR3 is picked up and not flags which are
above the physical mask shift
- Clean up and unify __phys_addr_symbol() definitions
* tag 'x86_mm_for_v6.19_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/libstub: Fix page table access in 5-level to 4-level paging transition
x86/boot: Fix page table access in 5-level to 4-level paging transition
x86/mm: Unify __phys_addr_symbol()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"Features:
- Cheaper MAY_EXEC handling for path lookup. This elides MAY_WRITE
permission checks during path lookup and adds the
IOP_FASTPERM_MAY_EXEC flag so filesystems like btrfs can avoid
expensive permission work.
- Hide dentry_cache behind runtime const machinery.
- Add German Maglione as virtiofs co-maintainer.
Cleanups:
- Tidy up and inline step_into() and walk_component() for improved
code generation.
- Re-enable IOCB_NOWAIT writes to files. This refactors file
timestamp update logic, fixing a layering bypass in btrfs when
updating timestamps on device files and improving FMODE_NOCMTIME
handling in VFS now that nfsd started using it.
- Path lookup optimizations extracting slowpaths into dedicated
routines and adding branch prediction hints for mntput_no_expire(),
fd_install(), lookup_slow(), and various other hot paths.
- Enable clang's -fms-extensions flag, requiring a JFS rename to
avoid conflicts.
- Remove spurious exports in fs/file_attr.c.
- Stop duplicating union pipe_index declaration. This depends on the
shared kbuild branch that brings in -fms-extensions support which
is merged into this branch.
- Use MD5 library instead of crypto_shash in ecryptfs.
- Use largest_zero_folio() in iomap_dio_zero().
- Replace simple_strtol/strtoul with kstrtoint/kstrtouint in init and
initrd code.
- Various typo fixes.
Fixes:
- Fix emergency sync for btrfs. Btrfs requires an explicit sync_fs()
call with wait == 1 to commit super blocks. The emergency sync path
never passed this, leaving btrfs data uncommitted during emergency
sync.
- Use local kmap in watch_queue's post_one_notification().
- Add hint prints in sb_set_blocksize() for LBS dependency on THP"
* tag 'vfs-6.19-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (35 commits)
MAINTAINERS: add German Maglione as virtiofs co-maintainer
fs: inline step_into() and walk_component()
fs: tidy up step_into() & friends before inlining
orangefs: use inode_update_timestamps directly
btrfs: fix the comment on btrfs_update_time
btrfs: use vfs_utimes to update file timestamps
fs: export vfs_utimes
fs: lift the FMODE_NOCMTIME check into file_update_time_flags
fs: refactor file timestamp update logic
include/linux/fs.h: trivial fix: regualr -> regular
fs/splice.c: trivial fix: pipes -> pipe's
fs: mark lookup_slow() as noinline
fs: add predicts based on nd->depth
fs: move mntput_no_expire() slowpath into a dedicated routine
fs: remove spurious exports in fs/file_attr.c
watch_queue: Use local kmap in post_one_notification()
fs: touch up predicts in path lookup
fs: move fd_install() slowpath into a dedicated routine and provide commentary
fs: hide dentry_cache behind runtime const machinery
fs: touch predicts in do_dentry_open()
...
|
|
Add test cases for the client not providing a pointer to a
struct cs_dsp_client_ops. This proves that it is safe for the client
to leave the client_ops pointer at NULL if it does not need to
implement any of the callbacks.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251128102132.1575177-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
A client of cs_dsp does not necessarily need to implement any of the
optional callbacks in struct cs_dsp_client_ops, so allow the client_ops
pointer to be NULL.
This has been done by pointing client_ops at a default empty
cs_dsp_client_ops. It keeps the code cleaner by avoiding having to add
double nested NULL checks everywhere one of these callbacks is called.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251128102132.1575177-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use kvzalloc() instead of kzalloc() to allocate memory to cache the
content of a firmware control.
Most firmware controls are only small, typically a few bytes. But on
some firmware there can be much larger controls for coefficient or
model data.
The overhead of kvzalloc() is negligible because most control allocs
can be satisfied by the normal kmalloc() that kvzalloc() will try first.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127103947.1094934-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In cs_dsp_debugfs_read_controls_show() take the pwr_lock mutex
around the list walk. This protects against debugfs returning
a partial set of new controls if those controls are being added
to the list while it is being walked.
Controls are never deleted from this list, and are only added to
the end of the list. So there was never a danger of following a
stale pointer to garbage.
The worst case was that the printed list is truncated if it saw an
entry that was the list end just before a new entry was appended to
the list.
With the original code, the truncated list from the debugfs could
show only _some_ of the new entries. This could be confusing because
it appears that some new entries are missing.
Adding the mutex means that the debugfs read provides an atomic view.
Either it shows the old content before any of the new controls were
added; or it shows the new content after all the new controls are
added.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251127113238.1251352-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Replace open-coded getting root OF node and matching against it with
new of_machine_device_match() helper.
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Tested-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20251112-b4-of-match-matchine-data-v2-6-d46b72003fd6@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Now that cs_dsp uses regmap_raw_write() instead of regmap_raw_write_async()
it doesn't need to keep multiple DMA-safe buffers of every chunk of data
it wrote.
See commit fe08b7d5085a ("firmware: cs_dsp: Remove async regmap writes")
Only one write can be in progress at a time, so one DMA-safe buffer can be
re-used. The single DMA-safe buffer is reallocated if the next write chunk
is larger. Reallocation size is rounded up to reduce the amount of churn.
PAGE_SIZE is used as a convenient size multiple. Typically for .wmfw files
the first chunk is the largest.
A DMA-safe intermediate buffer is used because we can't assume that the
bus underlying regmap can accept non-DMA-safe buffers.
Note that a chunk from the firmware file cannot simply be split into
arbitrarily-sized chunks to avoid buffer reallocation. The data in the
firmware file is preformatted to be written directly to the device as one
block. It already takes account of alignment, write-bursts and write
length requirements of the target hardware, so that the cs_dsp driver can
treat it as an opaque blob.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251126131501.884188-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/drivers
TI SoC driver updates for v6.19
- ti_sci: Add Partial-IO poweroff support and sys_off handler integration
- ti_sci: Gate IO isolation programming on firmware capability flag
- ti_sci: cleanup by replacing ifdeffery in PM ops with pm_sleep_ptr() macro
* tag 'ti-driver-soc-for-v6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux:
firmware: ti_sci: Partial-IO support
firmware: ti_sci: Support transfers without response
firmware: ti_sci: Set IO Isolation only if the firmware is capable
firmware: ti_sci: Replace ifdeffery by pm_sleep_ptr() macro
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/drivers
i.MX drivers update for 6.19:
- A series from Peng Fan to to improve i.MX SCU firmware drivers
* tag 'imx-drivers-6.19' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
firmware: imx: scu: Use devm_mutex_init
firmware: imx: scu: Suppress bind attrs
firmware: imx: scu: Update error code
firmware: imx: scu-irq: Remove unused export of imx_scu_enable_general_irq_channel
firmware: imx: scu-irq: Set mu_resource_id before get handle
firmware: imx: scu-irq: Init workqueue before request mbox channel
firmware: imx: scu-irq: Free mailbox client on failure at imx_scu_enable_general_irq_channel()
firmware: imx: scu-irq: fix OF node leak in
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The architectures supported by this driver have a maximum of 32-bits
of address, so we don't need more than 32-bits to store the length of
control data. Change the length in struct cs_dsp_coeff_ctl to an
unsigned int instead of a size_t. Also make a corresponding trivial
change to wm_adsp.c to prevent a compiler warning.
Tested on x86_64 builds this saves at least 4 bytes per control
(another 4 bytes might be saved if the compiler was inserting padding
to align the size_t).
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251124171536.78962-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Fix this warning that was generated from "make htmldocs":
WARNING: drivers/firmware/stratix10-svc.c:58 struct member 'intel_svc_fcs'
not described in 'stratix10_svc'
Fixes: e6281c26674e ("firmware: stratix10-svc: Add support for FCS")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20251106145941.37920e97@canb.auug.org.au/
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://patch.msgid.link/20251114185815.358423-1-dinguyen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Stephen Rothwell reports htmldocs warnings when merging char-misc tree:
WARNING: drivers/firmware/stratix10-svc.c:58 This comment starts with '/**',
but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Total number of transaction IDs, which is a combination of
WARNING: drivers/firmware/stratix10-svc.c:302 This comment starts with '/**',
but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* svc_mem_lock protects access to the svc_data_mem list for
Fixes: bcb9f4f07061 ("firmware: stratix10-svc: Add support for async communication")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Closes: https://lore.kernel.org/linux-next/20251114153347.16001109@canb.auug.org.au/
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
Link: https://patch.msgid.link/20251114185815.358423-2-dinguyen@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
There are two kernel-doc like descriptions at cper, which is used
by other parts of cper and on ghes driver. They both have kernel-doc
like descriptions.
Change the tags for them to be actual kernel-doc tags and add them
to the driver-api documentaion at the UEFI section.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Up to UEFI spec 2.9, the type byte of CPER struct for ARM processor
was defined simply as:
Type at byte offset 4:
- Cache error
- TLB Error
- Bus Error
- Micro-architectural Error
All other values are reserved
Yet, there was no information about how this would be encoded.
Spec 2.9A errata corrected it by defining:
- Bit 1 - Cache Error
- Bit 2 - TLB Error
- Bit 3 - Bus Error
- Bit 4 - Micro-architectural Error
All other values are reserved
That actually aligns with the values already defined on older
versions at N.2.4.1. Generic Processor Error Section.
Spec 2.10 also preserve the same encoding as 2.9A.
Adjust CPER and GHES handling code for both generic and ARM
processors to properly handle UEFI 2.9A and 2.10 encoding.
Link: https://uefi.org/specs/UEFI/2.10/Apx_N_Common_Platform_Error_Record.html#arm-processor-error-information
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Add a helper function to print a string with names associated
to each bit field.
A typical example is:
const char * const bits[] = {
"bit 3 name",
"bit 4 name",
"bit 5 name",
};
char str[120];
unsigned int bitmask = BIT(3) | BIT(5);
#define MASK GENMASK(5,3)
cper_bits_to_str(str, sizeof(str), FIELD_GET(MASK, bitmask),
bits, ARRAY_SIZE(bits));
The above code fills string "str" with "bit 3 name|bit 5 name".
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Compiling with W=1 with werror enabled produces an error:
drivers/firmware/efi/cper-arm.c: In function ‘cper_print_proc_arm’:
drivers/firmware/efi/cper-arm.c:298:64: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
298 | snprintf(infopfx, sizeof(infopfx), "%s ", newpfx);
| ^
drivers/firmware/efi/cper-arm.c:298:25: note: ‘snprintf’ output between 2 and 65 bytes into a destination of size 64
298 | snprintf(infopfx, sizeof(infopfx), "%s ", newpfx);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
As the logic there adds an space at the end of infopx buffer.
Add an extra space to avoid such warning.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Borislav Petkov (AMD) <bp@alien8.de>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Append the terminating \n to the string during the debugfs file
read instead of creating a string that already has a trailing \n.
This avoids the ugly behaviour of having to include a trailing \n
in the filenames stored to wmfw_file_name and bin_file_name in
struct cs_dsp.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120130640.1169780-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
cs_dsp_debugfs_wmfw_read() and cs_dsp_debugfs_bin_read() were identical
except for which struct member they printed. Move all this duplicated
code into a common function cs_dsp_debugfs_string_read().
The check for dsp->booted has been removed because this is redundant.
The two strings are set when the DSP is booted and cleared when the
DSP is powered-down.
Access to the string char * must be protected by the pwr_lock mutex. The
string is passed into cs_dsp_debugfs_string_read() as a pointer to the
char * so that the mutex lock can also be factored out into
cs_dsp_debugfs_string_read().
wmfw_file_name and bin_file_name members of struct cs_dsp have been
changed to const char *. It makes for a better API to pass a const
pointer into cs_dsp_debugfs_string_read().
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20251120130640.1169780-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Retrieve the GOP device's EDID information in the kernel's boot
parameters. Makes the data avaialble to kernel graphics code and
drives, such as efidrm.
With efidrm, the EDID is now also available to user-space compositors
via standard DRM interfaces.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Add support for EFI_EDID_DISCOVERED_PROTOCOL and EFI_EDID_ACTIVE_PROTOCOL
as defined in UEFI 2.8, sec 12.9. Define GUIDs and data structures in the
rsp header files.
In the GOP setup function, read the EDID of the primary GOP device. First
try EFI_EDID_ACTIVE_PROTOCOL, which supports user-specified EDID data. Or
else try EFI_EDID_DISCOVERED_PROTOCOL, which returns the display device's
native EDID. If no EDID could be retrieved, clear the storage.
Rename efi_setup_gop() to efi_setup_graphics() to reflect the changes
Let callers pass an optional instance of struct edid_data, if they are
interested.
While screen_info and edid_info come from the same device handle, they
should be considered indendent data. The former refers to the graphics
mode, the latter refers to the display device. GOP devices might not
provide both.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Move initialization of screen_info into a single helper function.
Frees up space in the main setup helper for adding EDID support.
No functional changes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
The device handle of the GOP device is required to retrieve the
correct EDID data. Find the handle instead of the GOP data. Still
return the GOP data in the function arguments, as we already looked
it up.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
For now, including <asm/pgalloc.h> instead of <linux/pgalloc.h> is
technically fine unless the .c file calls p*d_populate_kernel() helper
functions.
But it is a better practice to always include <linux/pgalloc.h>. Include
<linux/pgalloc.h> instead of <asm/pgalloc.h> outside arch/.
Link: https://lkml.kernel.org/r/20251024113047.119058-3-harry.yoo@oracle.com
Signed-off-by: Harry Yoo <harry.yoo@oracle.com>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Reviewed-by: Mike Rapoport (Microsoft) <rppt@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into char-misc-next
Dinh writes:
SoCFPGA firmware updates for v6.19
- Add support for voltage and temperature sensor
- Add a mutex to memory operations on Stratix10 service driver
- Add support for asynchronous communications in the service driver
- Replace scnprintf() with sysfs_emit()
* tag 'socfpga_firmware_updates_for_v6.19' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
firmware: stratix10-rsu: replace scnprintf() with sysfs_emit() in *_show() functions
firmware: stratix10-rsu: Migrate RSU driver to use stratix10 asynchronous framework.
firmware: stratix10-svc: Add support for RSU commands in asynchronous framework
firmware: stratix10-svc: Add support for async communication
firmware: stratix10-svc: Add mutex in stratix10 memory management
firmware: stratix10-svc: Add definition for voltage and temperature sensor
|
|
Add support for Partial-IO poweroff. In Partial-IO pins of a few
hardware units can generate system wakeups while DDR memory is not
powered resulting in a fresh boot of the system. These hardware units in
the SoC are always powered so that some logic can detect pin activity.
If the system supports Partial-IO as described in the fw capabilities, a
sys_off handler is added. This sys_off handler decides if the poweroff
is executed by entering normal poweroff or Partial-IO instead. The
decision is made by checking if wakeup is enabled on all devices that
may wake up the SoC from Partial-IO.
The possible wakeup devices are found by checking which devices
reference a "Partial-IO" system state in the list of wakeup-source
system states. Only devices that are actually enabled by the user will
be considered as an active wakeup source. If none of the wakeup sources
is enabled the system will do a normal poweroff. If at least one wakeup
source is enabled it will instead send a TI_SCI_MSG_PREPARE_SLEEP
message from the sys_off handler. Sending this message will result in an
immediate shutdown of the system. No execution is expected after this
point. The code will wait for 5s and do an emergency_restart afterwards
if Partial-IO wasn't entered at that point.
A short documentation about Partial-IO can be found in section 6.2.4.5
of the TRM at
https://www.ti.com/lit/pdf/spruiv7
Signed-off-by: Markus Schneider-Pargmann (TI.com) <msp@baylibre.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Kendall Willis <k-willis@ti.com>
Reviewed-by: Sebin Francis <sebin.francis@ti.com>
Link: https://patch.msgid.link/20251103-topic-am62-partialio-v6-12-b4-v10-2-0557e858d747@baylibre.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
Check the header flags if an response is expected or not. If it is not
expected skip the receive part of ti_sci_do_xfer(). This prepares the
driver for one-way messages as prepare_sleep for Partial-IO.
Reviewed-by: Kendall Willis <k-willis@ti.com>
Signed-off-by: Markus Schneider-Pargmann (TI.com) <msp@baylibre.com>
Reviewed-by: Dhruva Gole <d-gole@ti.com>
Reviewed-by: Sebin Francis <sebin.francis@ti.com>
Link: https://patch.msgid.link/20251103-topic-am62-partialio-v6-12-b4-v10-1-0557e858d747@baylibre.com
Signed-off-by: Nishanth Menon <nm@ti.com>
|
|
functions
Replace scnprintf() with sysfs_emit() in sysfs *_show() functions
in stratix10-rsu.c to follow the kernel's guidelines from
Documentation/filesystems/sysfs.rst.
This improves consistency, safety, and makes the code easier to
maintain and update in the future.
Signed-off-by: Rahul Kumar <rk0006818@gmail.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
framework.
* Add support for asynchronous communication to the RSU client channel.
* Migrate functions that communicate with the SDM to use the asynchronous
framework.
Signed-off-by: Mahesh Rao <mahesh.rao@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Integrate Remote System Update(RSU) service commands into the
asynchronous framework for communicating with SDM. This allows the RSU
commands to be processed asynchronously, improving the responsiveness
of the Stratix10 service channel.
The asynchronous framework now supports the following RSU commands:
* COMMAND_RSU_GET_SPT_TABLE
* COMMAND_RSU_STATUS
* COMMAND_RSU_NOTIFY
Signed-off-by: Mahesh Rao <mahesh.rao@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Introduce support for asynchronous communication with the Stratix10
service channel. Define new structures to enable asynchronous messaging
with the Secure Device Manager (SDM). Add and remove asynchronous
support for existing channels. Implement initialization and cleanup
routines for the asynchronous framework. Enable sending and polling of
messages to the SDM asynchronously.
The new public functions added are:
- stratix10_svc_add_async_client: Adds a client to the service channel.
- stratix10_svc_remove_async_client: Removes an asynchronous client from
the service channel.
- stratix10_svc_async_send: Sends an asynchronous message to the SDM
mailbox in EL3 secure firmware.
- stratix10_svc_async_poll: Polls the status of an asynchronous service
request in EL3 secure firmware.
- stratix10_svc_async_done: Marks an asynchronous transaction as
complete and frees up the resources.
These changes enhance the functionality of the Stratix10 service channel
by allowing for more efficient and flexible communication with the
firmware.
Signed-off-by: Mahesh Rao <mahesh.rao@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add mutex lock to stratix10_svc_allocate_memory and
stratix10_svc_free_memory for thread safety. This prevents race
conditions and ensures proper synchronization during memory operations.
This is required for parallel communication with the Stratix10 service
channel.
Fixes: 7ca5ce896524f ("firmware: add Intel Stratix10 service layer driver")
Cc: stable@vger.kernel.org
Signed-off-by: Mahesh Rao <mahesh.rao@altera.com>
Reviewed-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add entry in Stratix 10 Service Layer to support temperature and voltage
sensor.
Signed-off-by: Khairul Anuar Romli <khairul.anuar.romli@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
The EFI runtime wrappers use a file local semaphore to serialize access
to the EFI runtime services. This means that any calls to the arch
wrappers around the runtime services will also be serialized, removing
the need for redundant locking.
For robustness, add a facility that allows those arch wrappers to assert
that the semaphore was taken by the current task.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
Initialize the cpus_allowed_lock struct member of efi_mm.
Cc: stable@vger.kernel.org
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
|
|
The efi_memattr_init() function's return values (0 and -ENOMEM) are never
checked by callers. Convert the function to return void since the return
status is unused.
Signed-off-by: Breno Leitao <leitao@debian.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
|
Add a beginning " *" to each line to avoid kernel-doc warnings:
Warning: drivers/firmware/efi/stmm/mm_communication.h:34 bad line:
Warning: drivers/firmware/efi/stmm/mm_communication.h:113 bad line:
Warning: drivers/firmware/efi/stmm/mm_communication.h:130 bad line:
Fixes: c44b6be62e8d ("efi: Add tee-based EFI variable driver")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
|
